HUAWEI-NTDM-MIB
87 objects
The mib is used for defining huawei's native TDM management MIB objects.
Imported Objects
| HUAWEI-DEVICE-MIB | hwConfigChangeIP hwFrameIndex hwSlotIndex |
| HUAWEI-MIB | huaweiMgmt |
| IF-MIB | ifIndex InterfaceIndex |
| SNMPv2-SMI | Counter32 Counter64 Integer32 IpAddress MODULE-IDENTITY NOTIFICATION-TYPE OBJECT-TYPE Unsigned32 |
| SNMPv2-TC | DateAndTime DisplayString MacAddress RowStatus TruthValue |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.2011.5.105 | IdentityhwNTDM | The mib is used for defining huawei's native TDM management MIB objects. | ||
| 1.3.6.1.4.1.2011.5.105.1 | NodehwNTDMMibObjects | |||
| 1.3.6.1.4.1.2011.5.105.1.1 | TablehwNativeTDMIfTable | not-accessible | current | Configuration table of Native TDM interface, such as the TDM interface loopback type, line status and alarm status. The index of this table is ifIndex. |
| 1.3.6.1.4.1.2011.5.105.1.1.1 | RowhwNativeTDMIfEntry | not-accessible | current | Configuration table of Native TDM interface, such as the TDM interface loopback type, line status and alarm status. The index of this entry is ifIndex. |
| 1.3.6.1.4.1.2011.5.105.1.1.1.1 | ColumnhwNativeTDMIfLoopbackConfig | read-write | current | Loopback type of the TDM interface. Options: 1. dsx1NoLoop(1) -NoLoop 2. dsx1RemoteLoop(2) -RemoteLoop 3. dsx1DigitalLoop(3) -DigitalLoop 4. dsx1AnalogLoop(4) … |
| 1.3.6.1.4.1.2011.5.105.1.1.1.2 | ColumnhwNativeTDMIfLineStatus | read-only | current | Line status of the TDM interface. Options: 1. dsx1Normal(1) -Line is normal 2. dsx1Fault(2) -Line is fault 3. invalid(-1) -invalid value |
| 1.3.6.1.4.1.2011.5.105.1.1.1.3 | ColumnhwNativeTDMIfLineAlarm | read-only | current | Alarm status of the TDM interface. Options: 1. dsx1NoAlarm(0) -NoAlarm 2. dsx1LOS(1) -signal is lost 3. dsx1AIS(2) -alarm indicate signal value |
| 1.3.6.1.4.1.2011.5.105.1.2 | TablehwNativeTDMBoardTable | not-accessible | current | This table is used for setting configuration of Native TDM board, such as line coding format, impedance and remote inner loopback. The indexes of this table ar… |
| 1.3.6.1.4.1.2011.5.105.1.2.1 | RowhwNativeTDMBoardEntry | not-accessible | current | This table is used for setting configuration of Native TDM board, such as line coding format, impedance and remote inner loopback. The indexes of this entry ar… |
| 1.3.6.1.4.1.2011.5.105.1.2.1.1 | ColumnhwNativeTDMFrameIndex | accessible-for-notify | current | Frame ID of the TDM board. |
| 1.3.6.1.4.1.2011.5.105.1.2.1.2 | ColumnhwNativeTDMSlotIndex | accessible-for-notify | current | Slot ID of the TDM board. |
| 1.3.6.1.4.1.2011.5.105.1.2.1.3 | ColumnhwNativeTDMIfLineCoding | read-write | current | Line coding format of the TDM interfaces in the board. Options: 1. dsx1AMI(1) -AMI 2. dsx1HDB3(2) -HDB3 3. invalid(-1) -invalid value Default: dsx1HDB3(2) |
| 1.3.6.1.4.1.2011.5.105.1.2.1.4 | ColumnhwNativeTDMIfImpedance | read-write | current | Impedance of the TDM interfaces in the board. Options: 1. dsx1Impedance75(1) -75 2. dsx1Impedance120(2) -120 3. dsx1Impedance100(3) -100 4. invalid(-1) -invali… |
| 1.3.6.1.4.1.2011.5.105.1.2.1.5 | ColumnhwNativeTDMIfLoopback | read-write | current | Loopback of the TDM interfaces in the board. Options: 1. dsx1NoLoop(1) -no loopback 2. dsx1RemoteInner(2) -remote inner loopback Default: dsx1NoLoop(1) |
| 1.3.6.1.4.1.2011.5.105.1.2.1.6 | ColumnhwTDMCfgAccessMode | read-write | current | Access mode of the TDM interfaces board. Options: 1. e1(1) -e1 access mode 2. t1(2) -t1 access mode 3. invalid(-1) -invalid value |
| 1.3.6.1.4.1.2011.5.105.1.2.1.7 | ColumnhwTDMJitterBuffer | read-write | current | Set jitterbuffer of the TDM interfaces board.This operation will reboot the board. Setting jitterbuffer has great impact on the service,Increasing the value of… |
| 1.3.6.1.4.1.2011.5.105.1.3 | TablehwNativeTDMFlowTable | not-accessible | current | This table is used for setting configuration of the Native TDM flow, such as source interface index, source parameter. The index of this table is hwNativeTDMFl… |
| 1.3.6.1.4.1.2011.5.105.1.3.1 | RowhwNativeTDMFlowEntry | not-accessible | current | This table is used for setting configuration of the Native TDM flow, such as source interface index, source parameter. The index of this entry is hwNativeTDMFl… |
| 1.3.6.1.4.1.2011.5.105.1.3.1.1 | ColumnhwNativeTDMFlowID | read-create | current | Unique identifier of the Native TDM flow in the system. |
| 1.3.6.1.4.1.2011.5.105.1.3.1.2 | ColumnhwNativeTDMSrcIfIndex | read-create | current | Source interface index, in current application the source interface index is the index of the GPON interface. |
| 1.3.6.1.4.1.2011.5.105.1.3.1.3 | ColumnhwNativeTDMSrcPara | read-create | current | Source parameter, in current application the source parameter is the corresponding GEM Port-ID of the Native TDM service. |
| 1.3.6.1.4.1.2011.5.105.1.3.1.4 | ColumnhwNativeTDMDstIfIndex | read-create | current | Destination interface index, in current application the destination interface index is the index of the E1 port. In the case of the connection of pwe3-uplink, … |
| 1.3.6.1.4.1.2011.5.105.1.3.1.5 | ColumnhwNativeTDMDstPara | read-create | current | Destination parameter, used for future expansibility. |
| 1.3.6.1.4.1.2011.5.105.1.3.1.6 | ColumnhwNativeTDMAdminStatus | read-write | current | Administration status, used for future expansibility. |
| 1.3.6.1.4.1.2011.5.105.1.3.1.7 | ColumnhwNativeTDMOperStatus | read-only | current | Operation status, used for future expansibility. |
| 1.3.6.1.4.1.2011.5.105.1.3.1.8 | ColumnhwNativeTDMRowStatus | read-create | current | The present operation status of the row. Options: 1. createAndGo(4) -The present operation status is createAndGo 2. destroy(6) -The present operation status is… |
| 1.3.6.1.4.1.2011.5.105.1.3.1.9 | ColumnhwNativeTDMSrcPara1 | read-create | current | Source parameter, in current application the source parameter is the corresponding ONT-ID of the Native TDM service. |
| 1.3.6.1.4.1.2011.5.105.1.3.1.10 | ColumnhwNativeTDMSrcPara2 | read-create | current | Source parameter, in current application the source parameter is the corresponding Gemport-Index of the Native TDM service. |
| 1.3.6.1.4.1.2011.5.105.1.3.1.11 | ColumnhwNativeTDMServicePortIndex | read-create | current | A unique identifier of the service virtual port. The invalid value is -1. |
| 1.3.6.1.4.1.2011.5.105.1.3.1.12 | ColumnhwNativeTDMOnuTDMVCL | read-create | current | Onu TDM VCL ID. The invalid value is -1. |
| 1.3.6.1.4.1.2011.5.105.1.4 | TablehwNativeTDMBoardClockSourceTable | not-accessible | current | Configuration table of clock source configured in Native TDM board. The indexes of this table are hwNativeTDMFrameId, hwNativeTDMSlotId and hwNativeTDMClockSou… |
| 1.3.6.1.4.1.2011.5.105.1.4.1 | RowhwNativeTDMBoardClockSourceEntry | not-accessible | current | Configuration table of clock source configured in Native TDM board. The indexes of this entry are hwNativeTDMFrameId, hwNativeTDMSlotId and hwNativeTDMClockSou… |
| 1.3.6.1.4.1.2011.5.105.1.4.1.1 | ColumnhwNativeTDMFrameId | not-accessible | current | Frame ID of the TDM board. |
| 1.3.6.1.4.1.2011.5.105.1.4.1.2 | ColumnhwNativeTDMSlotId | not-accessible | current | Slot ID of the TDM board. |
| 1.3.6.1.4.1.2011.5.105.1.4.1.3 | ColumnhwNativeTDMClockSourceId | read-write | current | Clock Source ID of the TDM board. |
| 1.3.6.1.4.1.2011.5.105.1.4.1.4 | ColumnhwNativeTDMPwId | read-write | current | PW or CESoP connectID of Clock Source on the TDM board. |
| 1.3.6.1.4.1.2011.5.105.1.4.1.5 | ColumnhwNativeTDMRowStat | read-create | current | The present operation status of the row. Options: 1. createAndGo(4) -The present operation status of the row is createAndgo 2. destroy(6) -The present operatio… |
| 1.3.6.1.4.1.2011.5.105.1.4.1.6 | ColumnhwNativeTDMClockSourceState | read-only | current | Type of clock mode. Options: 1. normal(1) -the clock source state is normal 2. fail(2) -the clock source state is failed 3. invalid(-1) -invalid value |
| 1.3.6.1.4.1.2011.5.105.1.5 | TablehwNativeTDMFlowClockModeTable | not-accessible | current | Configuration table of the Native TDM flow clock mode. The index of this table is hwNativeTDMFlowConnectID. |
| 1.3.6.1.4.1.2011.5.105.1.5.1 | RowhwNativeTDMFlowClockModeEntry | not-accessible | current | Configuration table of the Native TDM flow clock mode. The index of this entry is hwNativeTDMFlowConnectID. |
| 1.3.6.1.4.1.2011.5.105.1.5.1.1 | ColumnhwNativeTDMFlowConnectID | not-accessible | current | Unique identifier of the Native TDM flow in the system. |
| 1.3.6.1.4.1.2011.5.105.1.5.1.2 | ColumnhwNativeTDMClockMode | read-write | current | Type of clock mode. Options: 1. master(1) -master mode 2. slave(2) -slave mode 3. invalid(-1) -invalid value |
| 1.3.6.1.4.1.2011.5.105.1.5.1.3 | ColumnhwNativeTDMClockSourceMode | read-write | current | Type of clock source mode. Options: 1. retiming(1) -retiming mode 2. adapt(2) -adapt mode 3. invalid(-1) -invalid value |
| 1.3.6.1.4.1.2011.5.105.1.5.1.4 | ColumnhwNativeTDMClockSourceIndex | read-write | current | Type of recovery clock source index: In current application the source index is 0. The invalid value is -1. |
| 1.3.6.1.4.1.2011.5.105.1.6 | TablehwNativeTDMConnectStatTable | not-accessible | current | Native TDM connect statistics table, such as received upstream Native TDM packets. The index of this table is hwNativeTDMConnectID. |
| 1.3.6.1.4.1.2011.5.105.1.6.1 | RowhwNativeTDMConnectStatEntry | not-accessible | current | Native TDM connect statistics table, such as received upstream Native TDM packets. The index of this entry is hwNativeTDMConnectID. |
| 1.3.6.1.4.1.2011.5.105.1.6.1.1 | ColumnhwNativeTDMConnectID | accessible-for-notify | current | Native TDM connect ID. |
| 1.3.6.1.4.1.2011.5.105.1.6.1.2 | ColumnhwNativeTDMConnectRecvTdmPackets | read-only | current | Received upstream Native TDM packets. |
| 1.3.6.1.4.1.2011.5.105.1.6.1.3 | ColumnhwNativeTDMConnectSendTdmPackets | read-only | current | Transmitted downstream Native TDM packets. |
| 1.3.6.1.4.1.2011.5.105.1.6.1.4 | ColumnhwNativeTDMConnectRecvCesopPackets | read-only | current | Received downstream CESoP packets. |
| 1.3.6.1.4.1.2011.5.105.1.6.1.5 | ColumnhwNativeTDMConnectSendCesopPackets | read-only | current | Transmitted upstream CESoP packets. |
| 1.3.6.1.4.1.2011.5.105.1.6.1.6 | ColumnhwNativeTDMConnectRecvUpVc12Frames | read-only | current | Received upstream VC12 frames. |
| 1.3.6.1.4.1.2011.5.105.1.6.1.7 | ColumnhwNativeTDMConnectSendDownVc12Frames | read-only | current | Transmitted downstream VC12 frames. |
| 1.3.6.1.4.1.2011.5.105.1.6.1.8 | ColumnhwNativeTDMConnectDropUpstreamBufferOverflow | read-only | current | Discarded upstream Native TDM packets due to buffer overflow. |
| 1.3.6.1.4.1.2011.5.105.1.6.1.9 | ColumnhwNativeTDMConnectDropUpstreamBufferUnderflow | read-only | current | Discarded upstream Native TDM packets due to buffer underflow. |
| 1.3.6.1.4.1.2011.5.105.1.6.1.10 | ColumnhwNativeTDMConnectDropDownstreamBufferOverflow | read-only | current | Discarded downstream CESoP packets due to buffer overflow. |
| 1.3.6.1.4.1.2011.5.105.1.6.1.11 | ColumnhwNativeTDMConnectDropDownstreamBufferUnderflow | read-only | current | Discarded downstream CESoP packets due to buffer underflow. |
| 1.3.6.1.4.1.2011.5.105.1.6.1.12 | ColumnhwNativeTDMConnectDropDownstreamSnError | read-only | current | Discarded downstream CESoP packets due to SN error. |
| 1.3.6.1.4.1.2011.5.105.1.6.1.50 | ColumnhwNativeTDMConnectStatClear | read-write | current | Clear the native TDM connect statistics. Options: 1. clearExecute(1) -clear the native TDM connect statistics 2. invalid(-1) -invalid value Default: clearExecu… |
| 1.3.6.1.4.1.2011.5.105.1.6.1.51 | ColumnhwNativeTDMConnectUpstreamRecvEthPackets | read-only | current | Statistics of the Rx upstream Ethernet packets. |
| 1.3.6.1.4.1.2011.5.105.1.6.1.52 | ColumnhwNativeTDMConnectDownstreamSendEthPackets | read-only | current | Statistics of the Tx downstream Ethernet packets. |
| 1.3.6.1.4.1.2011.5.105.1.6.1.53 | ColumnhwNativeTDMConnectUpstreamRecvVC12Packets | read-only | current | Statistics of the Rx upstream VC12 frames. |
| 1.3.6.1.4.1.2011.5.105.1.6.1.54 | ColumnhwNativeTDMConnectDownstreamSendVC12Packets | read-only | current | Statistics of the Tx downstream VC12 frames. |
| 1.3.6.1.4.1.2011.5.105.1.6.1.55 | ColumnhwNativeTDMConnectFifoFullPackets | read-only | current | FIFO full statistics in the de-jitter buffer. |
| 1.3.6.1.4.1.2011.5.105.1.6.1.56 | ColumnhwNativeTDMConnectFifoEmptyPackets | read-only | current | FIFO empty statistics in the de-jitter buffer. |
| 1.3.6.1.4.1.2011.5.105.1.6.1.57 | ColumnhwNativeTDMConnectOnuDropPackets | read-only | current | Discarded packets on onu side. |
| 1.3.6.1.4.1.2011.5.105.1.6.1.58 | ColumnhwNativeTDMConnectOnuRecvPackets | read-only | current | Received packets on onu side. |
| 1.3.6.1.4.1.2011.5.105.1.6.1.59 | ColumnhwNativeTDMConnectOnuSendPackets | read-only | current | Transmitted packets on onu side. |
| 1.3.6.1.4.1.2011.5.105.1.6.1.60 | ColumnhwNativeTDMConnectOnuRecvErrCesopPackets | read-only | current | Received abnormal CESoP packets on onu side. |
| 1.3.6.1.4.1.2011.5.105.1.6.1.61 | ColumnhwNativeTDMConnectOnuRecvSnErrCesopPackets | read-only | current | Received SN-error CESoP packets on onu side. |
| 1.3.6.1.4.1.2011.5.105.1.6.1.62 | ColumnhwNativeTDMConnectOnuRecvSsrcErrCesopPackets | read-only | current | Received SSRC-error CESoP packets on onu side. |
| 1.3.6.1.4.1.2011.5.105.1.7 | TablehwNativeTDMBoardAttrTable | not-accessible | current | Configuration table of Native TDM to CESoP board attribute, such as loopback type. The indexes of this table are hwNativeTDMBoardAttrFrameIndex and hwNativeTDM… |
| 1.3.6.1.4.1.2011.5.105.1.7.1 | RowhwNativeTDMBoardAttrEntry | not-accessible | current | Configuration table of Native TDM to CESoP board attribute, such as loopback type. The indexes of this entry are hwNativeTDMBoardAttrFrameIndex and hwNativeTDM… |
| 1.3.6.1.4.1.2011.5.105.1.7.1.1 | ColumnhwNativeTDMBoardAttrFrameIndex | not-accessible | current | Frame ID of the TDM board. |
| 1.3.6.1.4.1.2011.5.105.1.7.1.2 | ColumnhwNativeTDMBoardAttrSlotIndex | not-accessible | current | Slot ID of the TDM board. |
| 1.3.6.1.4.1.2011.5.105.1.7.1.3 | ColumnhwNativeTDMBoardLoopback | read-write | current | Loopback type of the TDM board. Options: 1. noloop(1) -no loopback 2. cesopinloop(2) -cesop in loopback 3. cesopoutloop(3) -cesop out loopback 4. nativeoutloop… |
| 1.3.6.1.4.1.2011.5.105.2 | NodehwNTDMTraps | |||
| 1.3.6.1.4.1.2011.5.105.2.1 | NodehwNTDMCommonTraps | |||
| 1.3.6.1.4.1.2011.5.105.2.1.0 | NodehwNTDMCommonTrapsPrefix | |||
| 1.3.6.1.4.1.2011.5.105.2.1.0.1 | NotificationhwTDMAccessModeChangeTrap | current | This trap will send when switch access mode. | |
| 1.3.6.1.4.1.2011.5.105.2.2 | NodehwNTDMAlarmTraps | |||
| 1.3.6.1.4.1.2011.5.105.2.2.0 | NodehwNTDMAlarmTrapsPrefix | |||
| 1.3.6.1.4.1.2011.5.105.2.2.0.1 | NotificationhwNTDMConnectFaultPeerEndAlarmTrap | current | This trap will send when the TDM connection fault occurs between the peer end and its connected equipment. | |
| 1.3.6.1.4.1.2011.5.105.2.2.0.2 | NotificationhwNTDMConnectFaultLocalAlarmTrap | current | This trap will send when the TDM connection fault occurs between the local device and the peer end. | |
| 1.3.6.1.4.1.2011.5.105.2.2.0.3 | NotificationhwNTDMConnectAISRecoverAlarmTrap | current | This trap will send when the TDM connection AIS recovers from the abnormal state. | |
| 1.3.6.1.4.1.2011.5.105.2.2.0.4 | NotificationhwNTDMConnectRDIRecoverAlarmTrap | current | This trap will send when the TDM connection RDI recovers from the abnormal state. | |
| 1.3.6.1.4.1.2011.5.105.3 | NodehwNTDMTrapsVbOids |