HUAWEI-OSPFV2-MIB
129 objects
The HUAWEI-OSPFV2-MIB contains objects to manage the system configuration. It defines the model used to represent configuration data that exists elsewhere in the system and on peripheral devices. The MIB is proper for system configuration. There are no constraints on this MIB.
Imported Objects
| HUAWEI-MIB | hwDatacomm |
| OSPF-MIB | ospfLsdbLsid ospfLsdbRouterId ospfNbrAddressLessIndex ospfNbrIpAddr ospfNbrRtrId ospfNbrState ospfRouterId |
| SNMPv2-CONF | MODULE-COMPLIANCE NOTIFICATION-GROUP OBJECT-GROUP |
| SNMPv2-SMI | Gauge32 Integer32 IpAddress MODULE-IDENTITY NOTIFICATION-TYPE OBJECT-TYPE TimeTicks Unsigned32 |
| SNMPv2-TC | DisplayString RowStatus TruthValue |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.2011.5.25.155 | IdentityhwOspfv2MIB | The HUAWEI-OSPFV2-MIB contains objects to manage the system configuration. It defines the model used to represent configuration data that exists elsewhere in t… | ||
| 1.3.6.1.4.1.2011.5.25.155.1 | NodehwOspfv2MIBObjects | |||
| 1.3.6.1.4.1.2011.5.25.155.1.1 | ScalarhwOspfv2MIBBinding | read-write | current | The ID of OSPF process that is bound to OSPF public MIB and the process will respond to SNMP requests from OSPF public MIB. The default value 0 means that no p… |
| 1.3.6.1.4.1.2011.5.25.155.2 | NodehwOspfv2ChangeTable | |||
| 1.3.6.1.4.1.2011.5.25.155.2.1 | ScalarhwOspfv2MIBObjectsChange | read-only | current | This node is used to record the time ticks when hwOspfv2MIBObjectsTable changed last time. |
| 1.3.6.1.4.1.2011.5.25.155.2.2 | ScalarhwOspfv2ProcessChange | read-only | current | This node is used to record the time ticks when hwOspfv2ProcessTable changed last time. |
| 1.3.6.1.4.1.2011.5.25.155.2.3 | ScalarhwOspfv2AreaChange | read-only | current | This node is used to record the time ticks when hwOspfv2AreaTable changed last time. |
| 1.3.6.1.4.1.2011.5.25.155.2.4 | ScalarhwOspfv2NetworkChange | read-only | current | This node is used to record the time ticks when hwOspfv2NetworkTable changed last time. |
| 1.3.6.1.4.1.2011.5.25.155.3 | TablehwOspfv2ProcessTable | not-accessible | current | Information describes the configured parameters of the router's attached OSPF processes. |
| 1.3.6.1.4.1.2011.5.25.155.3.1 | RowhwOspfv2ProcessEntry | not-accessible | current | Information describes the configured parameters of the router's attached OSPF processes. |
| 1.3.6.1.4.1.2011.5.25.155.3.1.1 | ColumnhwOspfv2ProcessIdIndex | accessible-for-notify | current | The process ID indicates the OSPF process number. The value ranges from 1 to 65535. |
| 1.3.6.1.4.1.2011.5.25.155.3.1.2 | ColumnhwOspfv2VpnName | read-create | current | The name of VPN instance to which the process belongs. The process instance needs to be specified when the process is created, and then cannot be changed. |
| 1.3.6.1.4.1.2011.5.25.155.3.1.3 | ColumnhwOspfv2ConfigRouterId | read-create | current | A 32-bit integer uniquely identifies the router in the Autonomous System. OSPF private router ID can be configured through this node. The default value is 0.0.… |
| 1.3.6.1.4.1.2011.5.25.155.3.1.4 | ColumnhwOspfv2ActualRouterId | read-only | current | This node is used to get actual router ID of process and it is a read-only node. If the node hwOspfv2ConfigRouterId is not set, the actual router ID should def… |
| 1.3.6.1.4.1.2011.5.25.155.3.1.5 | ColumnhwOspfv2BandwidthReference | read-create | current | The reference value that is used to calculate the link cost. If there is no explicit link cost, OSPF calculates the cost according to the bandwidth of the link… |
| 1.3.6.1.4.1.2011.5.25.155.3.1.6 | ColumnhwOspfv2Description | read-create | current | The description of the OSPF process. |
| 1.3.6.1.4.1.2011.5.25.155.3.1.7 | ColumnhwOspfv2LsaArriveIntvl | read-create | current | To avoid wasting network resources due to network changes, OSPF defines that the interval for receiving LSAs is 1 second. In a stable network, if the fast spee… |
| 1.3.6.1.4.1.2011.5.25.155.3.1.8 | ColumnhwOspfv2LsaArriveMaxIntvl | read-create | current | This object indicates the maximum interval of intelligent-timer for receiving OSPF LSAs. When hwOspfv2LsaArriveMaxIntvl is specified, you need also specify hwO… |
| 1.3.6.1.4.1.2011.5.25.155.3.1.9 | ColumnhwOspfv2LsaArriveStartIntvl | read-create | current | This object indicates the initial interval of intelligent-timer for receiving OSPF LSAs. When hwOspfv2LsaArriveStartIntvl is specified, you need also specify h… |
| 1.3.6.1.4.1.2011.5.25.155.3.1.10 | ColumnhwOspfv2LsaArriveHoldIntvl | read-create | current | This object indicates the Holdtime interval of intelligent-timer for receiving OSPF LSAs. After an intelligent timer is enabled, the interval for receiving LSA… |
| 1.3.6.1.4.1.2011.5.25.155.3.1.11 | ColumnhwOspfv2LsaOrigIntvl | read-create | current | To avoid wasting network source due to network changes, OSPF defines that the interval for updating LSAs is 5 seconds. In a stable network, if the speed of rou… |
| 1.3.6.1.4.1.2011.5.25.155.3.1.12 | ColumnhwOspfv2LsaOrigMaxIntvl | read-create | current | This object indicates the maximum interval of intelligent-timer for updating OSPF LSAs. When hwOspfv2LsaOrigMaxIntvl is specified, you need also specify hwOspf… |
| 1.3.6.1.4.1.2011.5.25.155.3.1.13 | ColumnhwOspfv2LsaOrigStartIntvl | read-create | current | This object indicates the initial interval of intelligent-timer for updating OSPF LSAs. When hwOspfv2LsaOrigStartIntvl is specified, you need also specify hwOs… |
| 1.3.6.1.4.1.2011.5.25.155.3.1.14 | ColumnhwOspfv2LsaOrigHoldIntvl | read-create | current | This object indicates the Holdtime interval of intelligent-timer for updating OSPF LSAs. After an intelligent timer is enabled, the interval for updating LSAs … |
| 1.3.6.1.4.1.2011.5.25.155.3.1.15 | ColumnhwOspfv2LsaOrigIntvlOtherType | read-create | current | This object indicates the interval for updating LSAs, excluding OSPF router LSAs and network LSAs. hwOspfv2LsaOrigIntvlOtherType and hwOspfv2LsaOrigIntvl canno… |
| 1.3.6.1.4.1.2011.5.25.155.3.1.16 | ColumnhwOspfv2LsdbOverflowLimit | read-create | current | The maximum number of external LSAs in OSPF LSDB. When this node is set to 0, it means that no limits exist. |
| 1.3.6.1.4.1.2011.5.25.155.3.1.17 | ColumnhwOspfv2MaxLoadBalaNumber | read-create | current | The maximum number of equal-cost routes to a destination in the routing table. |
| 1.3.6.1.4.1.2011.5.25.155.3.1.18 | ColumnhwOspfv2AseRouteMaxNumber | read-create | current | The maximum number of ASE routes that are supported by OSPF. |
| 1.3.6.1.4.1.2011.5.25.155.3.1.19 | ColumnhwOspfv2InterRouteMaxNumber | read-create | current | The maximum number of inter-area routes that are supported by OSPF. |
| 1.3.6.1.4.1.2011.5.25.155.3.1.20 | ColumnhwOspfv2IntraRouteMaxNumber | read-create | current | The maximum number of intra-area routes that are supported by OSPF. |
| 1.3.6.1.4.1.2011.5.25.155.3.1.21 | ColumnhwOspfv2RetransLimitMaxNumber | read-create | current | The maximum count of retransmission. The value is an integer that ranges from 2 to 255. When the retransmission limit is disabled, the value is set to 0. |
| 1.3.6.1.4.1.2011.5.25.155.3.1.22 | ColumnhwOspfv2Rfc1583Compatibility | read-create | current | It is used to enable the routing rule for compatible RFC 1583. |
| 1.3.6.1.4.1.2011.5.25.155.3.1.23 | ColumnhwOspfv2ShamHello | read-create | current | It is used to enable the sham-hello feature of OSPF. After the feature is enabled, OSPF updates the timeout timer of the neighbor when receiving protocol packe… |
| 1.3.6.1.4.1.2011.5.25.155.3.1.24 | ColumnhwOspfv2SpfSchIntvlUnit | read-create | current | The value of the object identifies the interval unit for OSPF to calculate routes. This object must be specified together with hwOspfv2SpfSchIntervalNumber. By… |
| 1.3.6.1.4.1.2011.5.25.155.3.1.25 | ColumnhwOspfv2SpfSchIntvlNumber | read-create | current | The value of the object identifies the interval for OSPF to calculate routes. This object must be specified together with hwOspfv2SpfSchIntervalUnit. By defaul… |
| 1.3.6.1.4.1.2011.5.25.155.3.1.26 | ColumnhwOspfv2SpfSchMaxIntvl | read-create | current | This object indicates the maximum interval of intelligent timer for OSPF to perform the SPF calculation. When hwOspfv2SpfSchMaxIntvl is specified, you need als… |
| 1.3.6.1.4.1.2011.5.25.155.3.1.27 | ColumnhwOspfv2SpfSchStartIntvl | read-create | current | This object indicates the initial interval of intelligent timer for OSPF to perform the SPF calculation. When hwOspfv2SpfSchStartIntvl is specified, you need a… |
| 1.3.6.1.4.1.2011.5.25.155.3.1.28 | ColumnhwOspfv2SpfSchHoldIntvl | read-create | current | This object indicates the Holdtime interval of intelligent timer for OSPF to perform the SPF calculation. After an intelligent timer is enabled, the interval f… |
| 1.3.6.1.4.1.2011.5.25.155.3.1.29 | ColumnhwOspfv2OpaqueCapability | read-create | current | It is used to enable opaque-LSAs capability. When the capability is enabled, then the OSPF process can generate opaque LSAs and process the opaque LSAs receive… |
| 1.3.6.1.4.1.2011.5.25.155.3.1.30 | ColumnhwOspfv2TrafficAdjustment | read-create | current | It is used to enable IGP-shortcut feature. The value false means disable. Otherwise, the value true means enable. If you want to set this node to false, please… |
| 1.3.6.1.4.1.2011.5.25.155.3.1.31 | ColumnhwOspfv2TrafficAdvertise | read-create | current | It is used to enable IGP-shortcut and Forwarding Adjacency feature. |
| 1.3.6.1.4.1.2011.5.25.155.3.1.32 | ColumnhwOspfv2FlushTimer | read-create | current | The value of the flush timer. When configuring or undoing OSPF process, flush self-originated LSAs first. If the timer expires, stop flushing LSAs, and then re… |
| 1.3.6.1.4.1.2011.5.25.155.3.1.33 | ColumnhwOspfv2ProcessRowStatus | read-create | current | This node is used to create and destroy rows. Because CreateAndWait is not supported, you can set this node to CreatAndGo to create a new process. If the proce… |
| 1.3.6.1.4.1.2011.5.25.155.4 | TablehwOspfv2AreaTable | not-accessible | current | Information describes the configured parameters of the router's attached OSPF areas. |
| 1.3.6.1.4.1.2011.5.25.155.4.1 | RowhwOspfv2AreaEntry | not-accessible | current | Information describes the configured parameters of the router's attached OSPF areas. |
| 1.3.6.1.4.1.2011.5.25.155.4.1.1 | ColumnhwOspfv2AreaIdIndex | not-accessible | current | A 32-bit integer uniquely identifies an area. Area ID 0.0.0.0 is used for the OSPF backbone. |
| 1.3.6.1.4.1.2011.5.25.155.4.1.2 | ColumnhwOspfv2AreaType | read-create | current | Specify the type of area: nssa(1), stub(2), normal(3). |
| 1.3.6.1.4.1.2011.5.25.155.4.1.3 | ColumnhwOspfv2AreaNoSummary | read-create | current | This node is used to reduce the number of LSAs that are transmitted to the NSSA or Stub area. You can configure this node as an ABR. This also prevents the ABR… |
| 1.3.6.1.4.1.2011.5.25.155.4.1.4 | ColumnhwOspfv2AreaNssaFlushTimer | read-create | current | The value of the flush timer. When configuring or undoing NSSA feature, flush self-originated Type-5 and Type-7 LSAs first. If the timer expires, stop flushing… |
| 1.3.6.1.4.1.2011.5.25.155.4.1.5 | ColumnhwOspfv2AreaNssaDefAdvertise | read-create | current | This node is used to decide whether default Type-7 LSAs should be originated. When this node is set to true, for ABR router it must originate Type-7 LSAs, whil… |
| 1.3.6.1.4.1.2011.5.25.155.4.1.6 | ColumnhwOspfv2AreaNssaNoImportRoute | read-create | current | This node is used to decide whether the external route is imported to NSSA area. On ASBR, if this node is set to true, the external route can not be advertised… |
| 1.3.6.1.4.1.2011.5.25.155.4.1.7 | ColumnhwOspfv2AreaNssaTransAlways | read-create | current | This node specifies whether or not an NSSA router will unconditionally translate Type-7 LSAs to Type-5 LSAs when acting as an NSSA border router. When hwOspfAr… |
| 1.3.6.1.4.1.2011.5.25.155.4.1.8 | ColumnhwOspfv2AreaNssaTransTimer | read-create | current | This node is used to configure translator stability interval. This minimizes excessive flushing of translated Type-7 LSAs and provides a more stable translator… |
| 1.3.6.1.4.1.2011.5.25.155.4.1.9 | ColumnhwOspfv2AreaNssaAllowFaZero | read-create | current | When this node is set to true, the forwarding address of Type-7 LSAs can be filled with zero when the router generates Type-7 LSAs. |
| 1.3.6.1.4.1.2011.5.25.155.4.1.10 | ColumnhwOspfv2AreaNssaSuppressFa | read-create | current | When this node is set to true, the forwarding address of Type-7 LSAs can be filled with zero when the ABR translates Type-7 LSAs into Type-5 LSAs. |
| 1.3.6.1.4.1.2011.5.25.155.4.1.11 | ColumnhwOspfv2AreaNssaSetNBit | read-create | current | When this node is set to true, N-bit should be set in the option when sending DD packets. |
| 1.3.6.1.4.1.2011.5.25.155.4.1.12 | ColumnhwOspfv2AreaDefCost | read-create | current | This node is used to specify the cost of the default routes that flush to stub area by the ABR. The value ranges from 0 to 16777214. The default value is -1. |
| 1.3.6.1.4.1.2011.5.25.155.4.1.13 | ColumnhwOspfv2AreaDescription | read-create | current | This node is used to specify the description of the area. |
| 1.3.6.1.4.1.2011.5.25.155.4.1.14 | ColumnhwOspfv2AreaFilterExpAcl | read-create | current | This object indicates the number of basic ACL. The ACL number ranges from 2000 to 2999. The default value is 0, indicating no configuration. The object is used… |
| 1.3.6.1.4.1.2011.5.25.155.4.1.15 | ColumnhwOspfv2AreaFilterExpPrefix | read-create | current | This object indicates the name of the address prefix list. The name is a string of 1 to 169 characters. The object is used to filter the Summary LSAs that leav… |
| 1.3.6.1.4.1.2011.5.25.155.4.1.16 | ColumnhwOspfv2AreaFilterExpPolicy | read-create | current | This object indicates the name of the routing policy. The name is a string of 1 to 40 characters. The object is used to filter the Summary LSAs that leave the … |
| 1.3.6.1.4.1.2011.5.25.155.4.1.17 | ColumnhwOspfv2AreaFilterImpAcl | read-create | current | This object indicates the number of basic ACL. The value ranges from 2000 to 2999. The default value is 0, indicating no configuration. The object is used to f… |
| 1.3.6.1.4.1.2011.5.25.155.4.1.18 | ColumnhwOspfv2AreaFilterImpPrefix | read-create | current | This object indicates the name of the address prefix list. The name is a string of 1 to 169 characters. The object is used to filter the Summary LSAs that ente… |
| 1.3.6.1.4.1.2011.5.25.155.4.1.19 | ColumnhwOspfv2AreaFilterImpPolicy | read-create | current | This object indicates the name of the routing policy. The name is a string of 1 to 40 characters. The object is used to filter the Summary LSAs that enter the … |
| 1.3.6.1.4.1.2011.5.25.155.4.1.20 | ColumnhwOspfv2AreaAuthModeType | read-create | current | The type of the OSPF area authentication mode. none(1): not configured. simple(2): indicates the simple authentication mode. md5(3): indicates the md5 cipher m… |
| 1.3.6.1.4.1.2011.5.25.155.4.1.21 | ColumnhwOspfv2AreaAuthPasswordType | read-create | current | Specify the type of area authentication key. plaintext(2): If this node is set to plaintext(2), you can specify only the plain text authentication key on the n… |
| 1.3.6.1.4.1.2011.5.25.155.4.1.22 | ColumnhwOspfv2AreaAuthKeyId | read-create | current | Specify the authentication key ID for MD5 or HMAC-MD5 authentication mode. The value of the ID is an integer that ranges from 1 to 255. The default value 0 mea… |
| 1.3.6.1.4.1.2011.5.25.155.4.1.23 | ColumnhwOspfv2AreaAuthText | read-create | current | In simple authentication, this object indicates the authentication key. It's a string of 1 to 8 characters in plain text or 24 characters in cipher text. In MD… |
| 1.3.6.1.4.1.2011.5.25.155.4.1.24 | ColumnhwOspfv2AreaMplsTe | read-create | current | The node is used to enable the MPLS-TE capability. disable(1): no configuration. stdEnable(2): accepts only the LSAs in the standard format. That is, an LSA is… |
| 1.3.6.1.4.1.2011.5.25.155.4.1.25 | ColumnhwOspfv2AreaAreaRowStatus | read-create | current | This node is used to create and destroy rows. Because CreateAndWait is not supported, you can set this node to CreatAndGo to create a new area. If the area is … |
| 1.3.6.1.4.1.2011.5.25.155.4.1.26 | ColumnhwOspfv2AreaFilterExpAclName | read-create | current | This object indicates the ACL name. Note that the ACL can only be used as basic ACL. The object is used to filter the Summary LSAs that leave the area. It is i… |
| 1.3.6.1.4.1.2011.5.25.155.4.1.27 | ColumnhwOspfv2AreaFilterImpAclName | read-create | current | This object indicates the ACL name. Note that the ACL can only be used as basic ACL. The object is used to filter the Summary LSAs that enter the area. It is i… |
| 1.3.6.1.4.1.2011.5.25.155.4.1.28 | ColumnhwOspfv2AreaAuthKeychName | read-create | current | This object indicates the keychain name. It's a string of 1 to 47 characters. |
| 1.3.6.1.4.1.2011.5.25.155.5 | TablehwOspfv2NetworkTable | not-accessible | current | Information describes the configured parameters of the router's attached OSPF networks. |
| 1.3.6.1.4.1.2011.5.25.155.5.1 | RowhwOspfv2NetworkEntry | not-accessible | current | Information describes the configured parameters of the router's attached OSPF networks. |
| 1.3.6.1.4.1.2011.5.25.155.5.1.1 | ColumnhwOspfv2NetworkIpAddrIndex | not-accessible | current | Network IP address: specifies the address of the network segment where the interface resides. |
| 1.3.6.1.4.1.2011.5.25.155.5.1.2 | ColumnhwOspfv2NetworkIpMaskIndex | not-accessible | current | Network IP mask: specifies the wildcard mask of an IP address, which is similar to the reversed form of the mask of an IP address. '1' represents that the corr… |
| 1.3.6.1.4.1.2011.5.25.155.5.1.3 | ColumnhwOspfv2NetworkRowStatus | read-create | current | This node is used to create and destroy rows. Because CreateAndWait is not supported, you can set this node to CreatAndGo to create a new network. If the netwo… |
| 1.3.6.1.4.1.2011.5.25.155.6 | TablehwOspfv2NeighborTable | not-accessible | current | This object indicates the configured parameters of the OSPF neighbors attached to the router. |
| 1.3.6.1.4.1.2011.5.25.155.6.1 | RowhwOspfv2NeighborEntry | not-accessible | current | This object indicates the configured parameters of the OSPF neighbors attached to the router. |
| 1.3.6.1.4.1.2011.5.25.155.6.1.1 | ColumnhwOspfv2SelfIfnetIndex | not-accessible | current | This object indicates the unique value for each interface. |
| 1.3.6.1.4.1.2011.5.25.155.6.1.2 | ColumnhwOspfv2NbrIpAddrIndex | not-accessible | current | This object indicates the IP address of the OSPF neighbor. |
| 1.3.6.1.4.1.2011.5.25.155.6.1.3 | ColumnhwOspfv2SelfRouterId | read-only | current | This object indicates the 32-bit integer that uniquely identifies the router in the Autonomous System. It is the router ID of itself. |
| 1.3.6.1.4.1.2011.5.25.155.6.1.4 | ColumnhwOspfv2SelfIfIpAddress | read-only | current | This object indicates the IP address of the OSPF interface associated with this neighbor. |
| 1.3.6.1.4.1.2011.5.25.155.6.1.5 | ColumnhwOspfv2SelfIfName | read-only | current | The name of the OSPF interface associated with this neighbor. |
| 1.3.6.1.4.1.2011.5.25.155.6.1.6 | ColumnhwOspfv2NbrIfDesignatedRouter | read-only | current | This object indicates the IP address of the designated router that is obtained from the DD packets from this neighbor. By default, the value is '00000000'H. |
| 1.3.6.1.4.1.2011.5.25.155.6.1.7 | ColumnhwOspfv2NbrIfBackupDesignatedRouter | read-only | current | This object indicates the IP address of the backup designated router which is obtained from the DD packets from this neighbor. By default, the value is '000000… |
| 1.3.6.1.4.1.2011.5.25.155.6.1.8 | ColumnhwOspfv2NbrIfMtu | read-only | current | This object indicates the size of the largest IP datagram that can be sent out the sending interface without fragmentation. It is obtained from the DD packets … |
| 1.3.6.1.4.1.2011.5.25.155.6.1.9 | ColumnhwOspfv2NbrRouterId | read-only | current | This object indicates the router ID of this neighbor. |
| 1.3.6.1.4.1.2011.5.25.155.6.1.10 | ColumnhwOspfv2NbrState | read-only | current | This object indicates the state of the relationship with this neighbor. By default, the state is down. |
| 1.3.6.1.4.1.2011.5.25.155.6.1.11 | ColumnhwOspfv2NbrMode | read-only | current | This object indicates whether this neighbor is master or slave through the DD negotiation. |
| 1.3.6.1.4.1.2011.5.25.155.6.1.12 | ColumnhwOspfv2NbrPriority | read-only | current | This object indicates the priority of this neighbor in the designated router election algorithm. The value 0 signifies that the neighbor is not eligible to bec… |
| 1.3.6.1.4.1.2011.5.25.155.6.1.13 | ColumnhwOspfv2NbrUpTime | read-only | current | This object indicates the time (in seconds) since the state of this neighbor has been full. |
| 1.3.6.1.4.1.2011.5.25.155.6.1.14 | ColumnhwOspfv2NbrAuthSequence | read-only | current | This object indicates the unsigned 32-bit non-decreasing sequence number. Used to guard against replay attacks. By default, the value is 0. |
| 1.3.6.1.4.1.2011.5.25.155.6.1.15 | ColumnhwOspfv2NbrDeadTimeLeft | read-only | current | This object indicates the period (in seconds) after which this neighbor is declared dead. |
| 1.3.6.1.4.1.2011.5.25.155.6.1.16 | ColumnhwOspfv2NbrGrStatus | read-only | current | This object indicates whether the neighbor performs GR or functions as a GR helper. By default, the state is normal. |
| 1.3.6.1.4.1.2011.5.25.155.7 | TablehwOspfv2InterfaceTable | not-accessible | current | The Interface Table describes the interfaces from the viewpoint of OSPF. |
| 1.3.6.1.4.1.2011.5.25.155.7.1 | RowhwOspfv2InterfaceEntry | not-accessible | current | Information describes the configured parameters of the OSPF interfaces. |
| 1.3.6.1.4.1.2011.5.25.155.7.1.1 | ColumnhwOspfv2InterfaceIndex | not-accessible | current | A unique value for each interface. |
| 1.3.6.1.4.1.2011.5.25.155.7.1.2 | ColumnhwOspfv2InterfaceName | read-only | current | The name of the OSPF interface. |
| 1.3.6.1.4.1.2011.5.25.155.30 | NodehwOspfv2TrapsObjects | |||
| 1.3.6.1.4.1.2011.5.25.155.30.1 | ScalarhwOspfv2NbrChgReason | accessible-for-notify | current | The reason of the OSPF neighbor state change. |
| 1.3.6.1.4.1.2011.5.25.155.30.2 | ScalarhwOspfv2IfChgReason | accessible-for-notify | current | The reason of the OSPF interface state change. |
| 1.3.6.1.4.1.2011.5.25.155.30.3 | ScalarhwOspfv2AreaId | read-only | current | A 32-bit integer uniquely identifies an area. Area ID 0.0.0.0 is used for the OSPF backbone. |
| 1.3.6.1.4.1.2011.5.25.155.30.4 | ScalarhwOspfv2NewRouterId | read-only | current | This object indicates the 32-bit integer that uniquely identifies the router in the Autonomous System. It is the new router ID. |
| 1.3.6.1.4.1.2011.5.25.155.31 | NodehwOspfv2Traps | |||
| 1.3.6.1.4.1.2011.5.25.155.31.1 | NotificationhwOspfV2NeighborUnavailable | current | These objects are used to monitor/manage changed OSPF neighbor alarm parameters. | |
| 1.3.6.1.4.1.2011.5.25.155.31.2 | NotificationhwOspfV2NeighborUnavailableClear | current | These objects are used to monitor/manage changed OSPF neighbor clear alarm parameters. | |
| 1.3.6.1.4.1.2011.5.25.155.31.3 | NotificationhwOspfv2IntraAreaRouteridConflict | current | The object is used to monitor router ID conflict in an intra area. | |
| 1.3.6.1.4.1.2011.5.25.155.31.4 | NotificationhwOspfv2IntraAreaDRIpAddressConflict | current | The object is used to monitor conflicted IP addresses of DRs in an intra area. | |
| 1.3.6.1.4.1.2011.5.25.155.31.5 | NotificationhwOspfv2IntraAreaRouterIdConflictRecovered | current | The object is used to monitor router ID conflict recovery in an intra area. | |
| 1.3.6.1.4.1.2011.5.25.155.32 | NodehwOspfv2Conformance | |||
| 1.3.6.1.4.1.2011.5.25.155.32.1 | NodehwOspfv2Compliances | |||
| 1.3.6.1.4.1.2011.5.25.155.32.1.1 | CompliancehwOspfv2ModuleFullCompliance | current | The compliance statement for entities implementing the Huawei OSPF MIB | |
| 1.3.6.1.4.1.2011.5.25.155.32.2 | NodehwOspfv2Groups | |||
| 1.3.6.1.4.1.2011.5.25.155.32.2.1 | GrouphwOspfv2MIBObjectsGroup | current | These objects are used to monitor/manage OSPF general parameters. | |
| 1.3.6.1.4.1.2011.5.25.155.32.2.2 | GrouphwOspfv2ProcessGroup | current | These objects are used to monitor/manage OSPF process parameters. | |
| 1.3.6.1.4.1.2011.5.25.155.32.2.4 | GrouphwOspfv2AreaGroup | current | These objects are used to monitor/manage OSPF area parameters. | |
| 1.3.6.1.4.1.2011.5.25.155.32.2.5 | GrouphwOspfv2NetworkGroup | current | These objects are used to monitor/manage OSPF network parameters. | |
| 1.3.6.1.4.1.2011.5.25.155.32.2.6 | GrouphwOspfv2NeighborGroup | current | These objects are used to monitor/manage changed OSPF neighbor parameters | |
| 1.3.6.1.4.1.2011.5.25.155.32.2.7 | GrouphwOspfv2ChangeGroup | current | These objects are used to monitor/manage changed OSPF table parameters | |
| 1.3.6.1.4.1.2011.5.25.155.32.2.8 | GrouphwOspfTrapEventGroup | current | These objects are used to monitor/manage changed OSPF private alarm parameters. | |
| 1.3.6.1.4.1.2011.5.25.155.32.2.9 | GrouphwOspfv2TrapsObjectsGroup | current | The objects are used to monitor/manage the neighbor state change from full to others. | |
| 1.3.6.1.4.1.2011.5.25.155.32.2.10 | GrouphwOspfv2InterfaceGroup | current | These objects are used to monitor/manage changed OSPF interface parameters. | |
| 1.3.6.1.4.1.2011.5.25.155.32.2.11 | GrouphwOspfv2ProcessStatisticGroup | current | The statistics information group of OSPF process. | |
| 1.3.6.1.4.1.2011.5.25.155.33 | NodehwOspfv2Statistic | |||
| 1.3.6.1.4.1.2011.5.25.155.33.1 | TablehwOspfv2ProcessStatisticTable | not-accessible | current | Information describes the statistics of the router's attached OSPF processes. |
| 1.3.6.1.4.1.2011.5.25.155.33.1.1 | RowhwOspfv2ProcessStatisticEntry | not-accessible | current | Information describes the statistics of the router's attached OSPF processes. |
| 1.3.6.1.4.1.2011.5.25.155.33.1.1.1 | Columnhwospfv2ProcessPeerNumber | read-only | current | The peer number of OSPF process. |