HUAWEI-OSPFV3-MIB
255 objects
The MIB module for OSPF version 3. Copyright (C) The Internet Society (2006). This version of this MIB module is part of RFC draft-ietf-ospf-ospfv3-mib-11; see the RFC itself for full legal notices.
Imported Objects
| HUAWEI-MIB | hwDatacomm |
| IF-MIB | InterfaceIndex |
| INET-ADDRESS-MIB | InetAddress InetAddressPrefixLength InetAddressType |
| OSPF-MIB | BigMetric DesignatedRouterPriority HelloRange Metric Status |
| SNMPv2-CONF | MODULE-COMPLIANCE NOTIFICATION-GROUP OBJECT-GROUP |
| SNMPv2-SMI | Counter32 Gauge32 Integer32 mib-2 MODULE-IDENTITY NOTIFICATION-TYPE OBJECT-TYPE Unsigned32 |
| SNMPv2-TC | RowStatus TEXTUAL-CONVENTION TruthValue |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.2011.5.25.147 | IdentityhwOspfv3 | The MIB module for OSPF version 3. Copyright (C) The Internet Society (2006). This version of this MIB module is part of RFC draft-ietf-ospf-ospfv3-mib-11; see… | ||
| 1.3.6.1.4.1.2011.5.25.147.0 | NodehwOspfv3Notifications | |||
| 1.3.6.1.4.1.2011.5.25.147.0.1 | NotificationhwOspfv3VirtIfStateChange | current | An ospfv3VirtIfStateChange notification signifies that there has been a change in the state of an OSPFv3 virtual interface. This notification should be generat… | |
| 1.3.6.1.4.1.2011.5.25.147.0.2 | NotificationhwOspfv3NbrStateChange | current | An ospfv3NbrStateChange notification signifies that there has been a change in the state of a non-virtual OSPFv3 neighbor. This notification should be generate… | |
| 1.3.6.1.4.1.2011.5.25.147.0.3 | NotificationhwOspfv3VirtNbrStateChange | current | An ospfv3VirtNbrStateChange notification signifies that there has been a change in the state of an OSPFv3 virtual neighbor. This notification should be generat… | |
| 1.3.6.1.4.1.2011.5.25.147.0.4 | NotificationhwOspfv3IfConfigError | current | An ospfv3IfConfigError notification signifies that a packet has been received on a non-virtual interface from a router whose configuration parameters conflict … | |
| 1.3.6.1.4.1.2011.5.25.147.0.5 | NotificationhwOspfv3VirtIfConfigError | current | An ospfv3VirtIfConfigError notification signifies that a packet has been received on a virtual interface from a router whose configuration parameters conflict … | |
| 1.3.6.1.4.1.2011.5.25.147.0.6 | NotificationhwOspfv3IfRxBadPacket | current | An ospfv3IfRxBadPacket notification signifies that an OSPFv3 packet that cannot be parsed has been received on a non-virtual interface. | |
| 1.3.6.1.4.1.2011.5.25.147.0.7 | NotificationhwOspfv3VirtIfRxBadPacket | current | An ospfv3VirtIfRxBadPacket notification signifies that an OSPFv3 packet that cannot be parsed has been received on a virtual interface. | |
| 1.3.6.1.4.1.2011.5.25.147.0.8 | NotificationhwOspfv3IfStateChange | current | An ospfv3IfStateChange notification signifies that there has been a change in the state of a non-virtual OSPFv3 interface. This notification should be generate… | |
| 1.3.6.1.4.1.2011.5.25.147.0.9 | NotificationhwOspfv3RestartStatusChange | current | An ospfv3RestartStatusChange notification signifies that there has been a change in the graceful restart state for the router. This notification should be gene… | |
| 1.3.6.1.4.1.2011.5.25.147.0.10 | NotificationhwOspfv3NbrRestartHelperStatusChange | current | An ospfv3NbrRestartHelperStatusChange notification signifies that there has been a change in the graceful restart helper state for the neighbor. This notificat… | |
| 1.3.6.1.4.1.2011.5.25.147.0.11 | NotificationhwOspfv3VirtNbrRestartHelperStatusChange | current | An ospfv3VirtNbrRestartHelperStatusChange notification signifies that there has been a change in the graceful restart helper state for the virtual neighbor. Th… | |
| 1.3.6.1.4.1.2011.5.25.147.0.12 | NotificationhwOspfv3NssaTranslatorStatusChange | current | An ospfv3NssaTranslatorStatusChange notification indicates that there has been a change in the router's ability to translate OSPFv3 NSSA LSAs into OSPFv3 Exter… | |
| 1.3.6.1.4.1.2011.5.25.147.0.13 | NotificationhwOspfv3LastAuthKeyExpiry | current | An hwOspfv3LastAuthKeyExpiry notification indicates that the last key associated with an interface has expired. When this notification is received, either the … | |
| 1.3.6.1.4.1.2011.5.25.147.0.14 | NotificationhwOspfv3AuthSequenceNumWrap | current | An hwOspfv3AuthSequenceNumWrap notification indicates that the 64-bit authentication sequence number has wrapped. When this notification is received, all the k… | |
| 1.3.6.1.4.1.2011.5.25.147.0.15 | NotificationhwOspfv3IntraAreaRouterIdConflictRecovered | current | The object is used to monitor router ID conflict recovery in an intra area. | |
| 1.3.6.1.4.1.2011.5.25.147.0.16 | NotificationhwOspfv3PeerFlappingSuppressStatusChange | current | These objects are used to monitor changed OSPFv3 peer flapping suppress status. | |
| 1.3.6.1.4.1.2011.5.25.147.0.17 | NotificationhwOspfv3ImportAseRouteThreshold | current | This object indicates that the number of AS-external LSAs generated when an OSPFv3 process imports external routes exceeds the configured alarm threshold. | |
| 1.3.6.1.4.1.2011.5.25.147.0.18 | NotificationhwOspfv3ImportAseRouteThresholdClear | current | This object indicates that the number of AS-external LSAs generated when an OSPFv3 process imports external routes has been less than the configured alarm thre… | |
| 1.3.6.1.4.1.2011.5.25.147.0.19 | NotificationhwOspfv3ImportAseRouteExceed | current | This object indicates that the number of AS-external LSAs generated when an OSPFv3 process imports external routes exceeds the configured maximum number. | |
| 1.3.6.1.4.1.2011.5.25.147.0.20 | NotificationhwOspfv3ImportAseRouteExceedClear | current | This object indicates that the number of AS-external LSAs generated when an OSPFv3 process imports external routes has been less than the configured maximum nu… | |
| 1.3.6.1.4.1.2011.5.25.147.0.21 | NotificationhwOspfv3ImportNssaRouteThreshold | current | This object indicates that the number of NSSA LSAs generated when an OSPFv3 process imports external routes exceeds the configured alarm threshold. | |
| 1.3.6.1.4.1.2011.5.25.147.0.22 | NotificationhwOspfv3ImportNssaRouteThresholdClear | current | This object indicates that the number of NSSA LSAs generated when an OSPFv3 process imports external routes has been less than the configured alarm threshold. | |
| 1.3.6.1.4.1.2011.5.25.147.0.23 | NotificationhwOspfv3ImportNssaRouteExceed | current | This object indicates that the number of NSSA LSAs generated when an OSPFv3 process imports external routes exceeds the configured maximum number. | |
| 1.3.6.1.4.1.2011.5.25.147.0.24 | NotificationhwOspfv3ImportNssaRouteExceedClear | current | This object indicates that the number of NSSA LSAs generated when an OSPFv3 process imports external routes has been less than the configured maximum number. | |
| 1.3.6.1.4.1.2011.5.25.147.0.25 | NotificationhwOspfv3GreaterAgeLsaRecived | current | This object is used to monitor the router recive a greater age lsa in ospfv3. | |
| 1.3.6.1.4.1.2011.5.25.147.0.26 | NotificationhwOspfv3DeleteRouteByPurge | current | This object indicates that the local device deleted OSPFv3 routes advertised by other devices. Reset or isolate the device from the network. | |
| 1.3.6.1.4.1.2011.5.25.147.0.27 | NotificationhwOspfv3DeleteRouteByPurgeClear | current | This object indicates that the local device did not delete OSPFv3 routes advertised by other devices. | |
| 1.3.6.1.4.1.2011.5.25.147.0.28 | NotificationhwOspfv3RouteBeDeletedByPurgeExact | current | This object indicates that OSPFv3 routes advertised by the local device were deleted by another device. Reset or isolate the faulty device from the network. | |
| 1.3.6.1.4.1.2011.5.25.147.0.29 | NotificationhwOspfv3RouteBeDeletedByPurgeExactClear | current | This object indicates that OSPFv3 routes advertised by the local device were not deleted by another device. | |
| 1.3.6.1.4.1.2011.5.25.147.0.30 | NotificationhwOspfv3RouteBeDeletedByPurgeInexact | current | This object indicates that OSPFv3 routes advertised by the local device were deleted by another device, and the possibly faulty device did not support OSPFv3 f… | |
| 1.3.6.1.4.1.2011.5.25.147.0.31 | NotificationhwOspfv3RouteBeDeletedByPurgeInexactClear | current | This object indicates that OSPFv3 routes advertised by the local device were not deleted by another device. | |
| 1.3.6.1.4.1.2011.5.25.147.0.32 | NotificationhwOspfv3RouteBeDeletedByPurge | current | This object indicates that OSPFv3 routes advertised by the local device were deleted by another device. Log in to the possibly faulty device. If the device is … | |
| 1.3.6.1.4.1.2011.5.25.147.0.33 | NotificationhwOspfv3RouteBeDeletedByPurgeClear | current | This object indicates that OSPFv3 routes advertised by the local device were not deleted by another device. | |
| 1.3.6.1.4.1.2011.5.25.147.0.34 | NotificationhwOspfv3ThirdPartRouteBeDeletedByPurgeExact | current | This object indicates that OSPFv3 routes advertised by another device were deleted. Reset or isolate the faulty device from the network. | |
| 1.3.6.1.4.1.2011.5.25.147.0.35 | NotificationhwOspfv3ThirdPartRouteBeDeletedByPurgeExactClear | current | This object indicates that OSPFv3 routes advertised by another device were not deleted. | |
| 1.3.6.1.4.1.2011.5.25.147.0.36 | NotificationhwOspfv3ThirdPartRouteBeDeletedByPurgeInexact | current | This object indicates that OSPFv3 routes advertised by another device were deleted, and the possibly faulty device did not support OSPFv3 flush LSA source trac… | |
| 1.3.6.1.4.1.2011.5.25.147.0.37 | NotificationhwOspfv3ThirdPartRouteBeDeletedByPurgeInexactClear | current | This object indicates that OSPFv3 routes advertised by another device were not deleted. | |
| 1.3.6.1.4.1.2011.5.25.147.0.38 | NotificationhwOspfv3ThirdPartRouteBeDeletedByPurge | current | This object indicates that OSPFv3 routes advertised by another device were deleted. Log in to the possibly faulty device. If the device is deleting routes, res… | |
| 1.3.6.1.4.1.2011.5.25.147.0.39 | NotificationhwOspfv3ThirdPartRouteBeDeletedByPurgeClear | current | This object indicates that OSPFv3 routes advertised by another device were not deleted. | |
| 1.3.6.1.4.1.2011.5.25.147.1 | NodehwOspfv3Objects | |||
| 1.3.6.1.4.1.2011.5.25.147.1.1 | NodehwOspfv3GeneralGroup | |||
| 1.3.6.1.4.1.2011.5.25.147.1.1.1 | ScalarhwOspfv3RouterId | read-write | current | A 32-bit integer uniquely identifying the router in the Autonomous System. To ensure uniqueness, this may default to the value of one of the router's IPv4 host… |
| 1.3.6.1.4.1.2011.5.25.147.1.1.2 | ScalarhwOspfv3AdminStatus | read-write | current | The administrative status of OSPFv3 in the router. The value 'enabled' denotes that the OSPFv3 Process is active on at least one interface; 'disabled' disables… |
| 1.3.6.1.4.1.2011.5.25.147.1.1.3 | ScalarhwOspfv3VersionNumber | read-only | current | The version number of OSPF for IPv6 is 3. |
| 1.3.6.1.4.1.2011.5.25.147.1.1.4 | ScalarhwOspfv3AreaBdrRtrStatus | read-only | current | A flag to note whether this router is an area border router. |
| 1.3.6.1.4.1.2011.5.25.147.1.1.5 | ScalarhwOspfv3AsBdrRtrStatus | read-write | current | A flag to note whether this router is configured as an Autonomous System border router. |
| 1.3.6.1.4.1.2011.5.25.147.1.1.6 | ScalarhwOspfv3AsScopeLsaCount | read-only | current | The number of AS-Scope (e.g. AS-External) link state advertisements in the link state database. |
| 1.3.6.1.4.1.2011.5.25.147.1.1.7 | ScalarhwOspfv3AsScopeLsaCksumSum | read-only | current | The 32-bit unsigned sum of the LS checksums of the AS-scoped link state advertisements contained in the link state database. This sum can be used to determine … |
| 1.3.6.1.4.1.2011.5.25.147.1.1.8 | ScalarhwOspfv3OriginateNewLsas | read-only | current | The number of new link-state advertisements that have been originated. This number is incremented each time the router originates a new LSA. |
| 1.3.6.1.4.1.2011.5.25.147.1.1.9 | ScalarhwOspfv3RxNewLsas | read-only | current | The number of link state advertisements received determined to be new instantiations. This number does not include newer instantiations of self-originated link… |
| 1.3.6.1.4.1.2011.5.25.147.1.1.10 | ScalarhwOspfv3ExtLsaCount | read-only | current | The number of AS-Scope External(LS type 0x4005) link state advertisements in the link state database |
| 1.3.6.1.4.1.2011.5.25.147.1.1.11 | ScalarhwOspfv3ExtAreaLsdbLimit | read-write | current | The maximum number of non-default AS-external-LSAs entries that can be stored in the link state database. If the value is -1, then there is no limit. When the … |
| 1.3.6.1.4.1.2011.5.25.147.1.1.12 | ScalarhwOspfv3RestartSupport | read-write | current | The router's support for OSPFv3 Graceful restart. Options include: no restart support, only planned restarts or both planned and unplanned restarts. |
| 1.3.6.1.4.1.2011.5.25.147.1.1.13 | ScalarhwOspfv3RestartInterval | read-write | current | Configured OSPFv3 Graceful restart timeout interval. |
| 1.3.6.1.4.1.2011.5.25.147.1.1.14 | ScalarhwOspfv3RestartStatus | read-only | current | The current status of OSPFv3 Graceful restart capability. |
| 1.3.6.1.4.1.2011.5.25.147.1.1.15 | ScalarhwOspfv3RestartAge | read-only | current | Remaining time in current OSPFv3 Graceful restart interval. |
| 1.3.6.1.4.1.2011.5.25.147.1.1.16 | ScalarhwOspfv3RestartExitRc | read-only | current | Describes the outcome of the last attempt at a Graceful restart. none:............no restart has yet been attempted. inProgress:......a restart attempt is curr… |
| 1.3.6.1.4.1.2011.5.25.147.1.1.17 | ScalarhwOspfv3NotificationEnable | read-write | current | If this object is set to true(1), then it enables the generation of OSPFv3 Notifications. If it is set to false(2), these notifications are not generated. Conf… |
| 1.3.6.1.4.1.2011.5.25.147.1.1.18 | ScalarhwOspfv3ReferenceBandwidth | read-write | current | Reference bandwidth in kilobits per second for calculating default interface metrics. The default value is 100,000 KBPS (100 MBPS). This object is persistent, … |
| 1.3.6.1.4.1.2011.5.25.147.1.2 | TablehwOspfv3AreaTable | not-accessible | current | Information describing the configured parameters and cumulative statistics of the router's attached areas. |
| 1.3.6.1.4.1.2011.5.25.147.1.2.1 | RowhwOspfv3AreaEntry | not-accessible | current | Information describing the configured parameters and cumulative statistics of one of the router's attached areas. |
| 1.3.6.1.4.1.2011.5.25.147.1.2.1.1 | ColumnhwOspfv3AreaId | not-accessible | current | A 32-bit integer uniquely identifying an area. Area ID 0 is used for the OSPFv3 backbone. |
| 1.3.6.1.4.1.2011.5.25.147.1.2.1.2 | ColumnhwOspfv3AreaImportAsExtern | read-create | current | Indicates whether an area is a Stub area, NSSA, or standard area. AS-scope LSAs are not imported into Stub Areas or NSSAs. NSSAs import AS-External data as NSS… |
| 1.3.6.1.4.1.2011.5.25.147.1.2.1.3 | ColumnhwOspfv3AreaSpfRuns | read-only | current | The number of times that the intra-area route table has been calculated using this area's link state database. This is typically done using Dijkstra's algorith… |
| 1.3.6.1.4.1.2011.5.25.147.1.2.1.4 | ColumnhwOspfv3AreaBdrRtrCount | read-only | current | The total number of area border routers reachable within this area. This is initially zero, and is calculated in each SPF Pass. |
| 1.3.6.1.4.1.2011.5.25.147.1.2.1.5 | ColumnhwOspfv3AreaAsBdrRtrCount | read-only | current | The total number of Autonomous System border routers reachable within this area. This is initially zero, and is calculated in each SPF Pass. |
| 1.3.6.1.4.1.2011.5.25.147.1.2.1.6 | ColumnhwOspfv3AreaScopeLsaCount | read-only | current | The total number of Area-Scope link state advertisements in this area's link state database. |
| 1.3.6.1.4.1.2011.5.25.147.1.2.1.7 | ColumnhwOspfv3AreaScopeLsaCksumSum | read-only | current | The 32-bit unsigned sum of the Area-Scope link state advertisements' LS checksums contained in this area's link state database. The sum can be used to determin… |
| 1.3.6.1.4.1.2011.5.25.147.1.2.1.8 | ColumnhwOspfv3AreaSummary | read-create | current | The variable ospfv3AreaSummary controls the import of Inter-Area LSAs into stub and NSSA areas. It has no effect on other areas. If it is noAreaSummary, the ro… |
| 1.3.6.1.4.1.2011.5.25.147.1.2.1.9 | ColumnhwOspfv3AreaRowStatus | read-create | current | This object permits management of the table by facilitating actions such as row creation, construction and destruction. The value of this object has no effect … |
| 1.3.6.1.4.1.2011.5.25.147.1.2.1.10 | ColumnhwOspfv3AreaStubMetric | read-create | current | The metric value advertised for the default route into Stub and NSSA areas. |
| 1.3.6.1.4.1.2011.5.25.147.1.2.1.11 | ColumnhwOspfv3AreaNssaTranslatorRole | read-create | current | Indicates an NSSA border router's policy to perform NSSA translation of NSSA-LSAs into AS-External-LSAs. |
| 1.3.6.1.4.1.2011.5.25.147.1.2.1.12 | ColumnhwOspfv3AreaNssaTranslatorState | read-only | current | Indicates if and how an NSSA border router is performing NSSA translation of NSSA-LSAs into AS-External-LSAs. When this object is set to 'enabled', the NSSA bo… |
| 1.3.6.1.4.1.2011.5.25.147.1.2.1.13 | ColumnhwOspfv3AreaNssaTranslatorStabInterval | read-create | current | The stability interval defined as the number of seconds after an elected translator determines its services are no longer required that it should continue to p… |
| 1.3.6.1.4.1.2011.5.25.147.1.2.1.14 | ColumnhwOspfv3AreaNssaTranslatorEvents | read-only | current | Indicates the number of Translator state changes that have occurred since the last start-up of the OSPFv3 routing process. Discontinuities in the value of this… |
| 1.3.6.1.4.1.2011.5.25.147.1.3 | TablehwOspfv3AsLsdbTable | not-accessible | current | The OSPFv3 Process's AS-Scope Link State Database. |
| 1.3.6.1.4.1.2011.5.25.147.1.3.1 | RowhwOspfv3AsLsdbEntry | not-accessible | current | A single AS-Scope Link State Advertisement. |
| 1.3.6.1.4.1.2011.5.25.147.1.3.1.1 | ColumnhwOspfv3AsLsdbType | not-accessible | current | The type of the link state advertisement. Each link state type has a separate advertisement format. AS-Scope LSAs not recognized by the router may be stored in… |
| 1.3.6.1.4.1.2011.5.25.147.1.3.1.2 | ColumnhwOspfv3AsLsdbRouterId | not-accessible | current | The 32 bit number that uniquely identifies the originating router in the Autonomous System. |
| 1.3.6.1.4.1.2011.5.25.147.1.3.1.3 | ColumnhwOspfv3AsLsdbLsId | not-accessible | current | The Link State ID is an LS Type Specific field containing a unique identifier; it identifies the piece of the routing domain that is being described by the adv… |
| 1.3.6.1.4.1.2011.5.25.147.1.3.1.4 | ColumnhwOspfv3AsLsdbSequence | read-only | current | The sequence number field is a signed 32-bit integer. It is used to detect old and duplicate link state advertisements. The space of sequence numbers is linear… |
| 1.3.6.1.4.1.2011.5.25.147.1.3.1.5 | ColumnhwOspfv3AsLsdbAge | read-only | current | This field is the age of the link state advertisement in seconds. |
| 1.3.6.1.4.1.2011.5.25.147.1.3.1.6 | ColumnhwOspfv3AsLsdbChecksum | read-only | current | This field is the checksum of the complete contents of the advertisement, excepting the age field. The age field is excepted so that an advertisement's age can… |
| 1.3.6.1.4.1.2011.5.25.147.1.3.1.7 | ColumnhwOspfv3AsLsdbAdvertisement | read-only | current | The entire Link State Advertisement, including its header. |
| 1.3.6.1.4.1.2011.5.25.147.1.3.1.8 | ColumnhwOspfv3AsLsdbTypeKnown | read-only | current | Indicates whether the LSA type is recognized by this Router. |
| 1.3.6.1.4.1.2011.5.25.147.1.4 | TablehwOspfv3AreaLsdbTable | not-accessible | current | The OSPFv3 Process's Area-Scope Link State Database. |
| 1.3.6.1.4.1.2011.5.25.147.1.4.1 | RowhwOspfv3AreaLsdbEntry | not-accessible | current | A single Area-Scope Link State Advertisement. |
| 1.3.6.1.4.1.2011.5.25.147.1.4.1.1 | ColumnhwOspfv3AreaLsdbAreaId | not-accessible | current | The 32-bit identifier of the Area from which the LSA was received. |
| 1.3.6.1.4.1.2011.5.25.147.1.4.1.2 | ColumnhwOspfv3AreaLsdbType | not-accessible | current | The type of the link state advertisement. Each link state type has a separate advertisement format. Area-Scope LSAs unrecognized by the router are also stored … |
| 1.3.6.1.4.1.2011.5.25.147.1.4.1.3 | ColumnhwOspfv3AreaLsdbRouterId | not-accessible | current | The 32-bit number that uniquely identifies the originating router in the Autonomous System. |
| 1.3.6.1.4.1.2011.5.25.147.1.4.1.4 | ColumnhwOspfv3AreaLsdbLsId | not-accessible | current | The Link State ID is an LS Type Specific field containing a unique identifier; it identifies the piece of the routing domain that is being described by the adv… |
| 1.3.6.1.4.1.2011.5.25.147.1.4.1.5 | ColumnhwOspfv3AreaLsdbSequence | read-only | current | The sequence number field is a signed 32-bit integer. It is used to detect old and duplicate link state advertisements. The space of sequence numbers is linear… |
| 1.3.6.1.4.1.2011.5.25.147.1.4.1.6 | ColumnhwOspfv3AreaLsdbAge | read-only | current | This field is the age of the link state advertisement in seconds. |
| 1.3.6.1.4.1.2011.5.25.147.1.4.1.7 | ColumnhwOspfv3AreaLsdbChecksum | read-only | current | This field is the checksum of the complete contents of the advertisement, excepting the age field. The age field is excepted so that an advertisement's age can… |
| 1.3.6.1.4.1.2011.5.25.147.1.4.1.8 | ColumnhwOspfv3AreaLsdbAdvertisement | read-only | current | The entire Link State Advertisement, including its header. |
| 1.3.6.1.4.1.2011.5.25.147.1.4.1.9 | ColumnhwOspfv3AreaLsdbTypeKnown | read-only | current | Indicates whether the LSA type is recognized by this Router. |
| 1.3.6.1.4.1.2011.5.25.147.1.5 | TablehwOspfv3LinkLsdbTable | not-accessible | current | The OSPFv3 Process's Link-Scope Link State Database. |
| 1.3.6.1.4.1.2011.5.25.147.1.5.1 | RowhwOspfv3LinkLsdbEntry | not-accessible | current | A single Link-Scope Link State Advertisement. |
| 1.3.6.1.4.1.2011.5.25.147.1.5.1.1 | ColumnhwOspfv3LinkLsdbIfIndex | not-accessible | current | The identifier of the link from which the LSA was received. |
| 1.3.6.1.4.1.2011.5.25.147.1.5.1.2 | ColumnhwOspfv3LinkLsdbIfInstId | not-accessible | current | The identifier of the interface instance from which the LSA was received. |
| 1.3.6.1.4.1.2011.5.25.147.1.5.1.3 | ColumnhwOspfv3LinkLsdbType | not-accessible | current | The type of the link state advertisement. Each link state type has a separate advertisement format. Link-Scope LSAs unrecognized by the router are also stored … |
| 1.3.6.1.4.1.2011.5.25.147.1.5.1.4 | ColumnhwOspfv3LinkLsdbRouterId | not-accessible | current | The 32 bit number that uniquely identifies the originating router in the Autonomous System. |
| 1.3.6.1.4.1.2011.5.25.147.1.5.1.5 | ColumnhwOspfv3LinkLsdbLsId | not-accessible | current | The Link State ID is an LS Type Specific field containing a unique identifier; it identifies the piece of the routing domain that is being described by the adv… |
| 1.3.6.1.4.1.2011.5.25.147.1.5.1.6 | ColumnhwOspfv3LinkLsdbSequence | read-only | current | The sequence number field is a signed 32-bit integer. It is used to detect old and duplicate link state advertisements. The space of sequence numbers is linear… |
| 1.3.6.1.4.1.2011.5.25.147.1.5.1.7 | ColumnhwOspfv3LinkLsdbAge | read-only | current | This field is the age of the link state advertisement in seconds. |
| 1.3.6.1.4.1.2011.5.25.147.1.5.1.8 | ColumnhwOspfv3LinkLsdbChecksum | read-only | current | This field is the checksum of the complete contents of the advertisement, excepting the age field. The age field is excepted so that an advertisement's age can… |
| 1.3.6.1.4.1.2011.5.25.147.1.5.1.9 | ColumnhwOspfv3LinkLsdbAdvertisement | read-only | current | The entire Link State Advertisement, including its header. |
| 1.3.6.1.4.1.2011.5.25.147.1.5.1.10 | ColumnhwOspfv3LinkLsdbTypeKnown | read-only | current | Indicates whether the LSA type is recognized by this Router. |
| 1.3.6.1.4.1.2011.5.25.147.1.6 | TablehwOspfv3IfTable | not-accessible | current | The OSPFv3 Interface Table describes the interfaces from the viewpoint of OSPFv3. |
| 1.3.6.1.4.1.2011.5.25.147.1.6.1 | RowhwOspfv3IfEntry | not-accessible | current | The OSPFv3 Interface Entry describes one interface from the viewpoint of OSPFv3. |
| 1.3.6.1.4.1.2011.5.25.147.1.6.1.1 | ColumnhwOspfv3IfIndex | not-accessible | current | The interface index of this OSPFv3 interface. It corresponds to the interface index of the IPv6 interface on which OSPFv3 is configured. |
| 1.3.6.1.4.1.2011.5.25.147.1.6.1.2 | ColumnhwOspfv3IfInstId | not-accessible | current | Enables multiple interface instances of OSPFv3 to be run over a single link. Each protocol instance would be assigned a separate ID. This ID has local link sig… |
| 1.3.6.1.4.1.2011.5.25.147.1.6.1.3 | ColumnhwOspfv3IfAreaId | read-create | current | A 32-bit integer uniquely identifying the area to which the interface connects. Area ID 0 is used for the OSPFv3 backbone. |
| 1.3.6.1.4.1.2011.5.25.147.1.6.1.4 | ColumnhwOspfv3IfType | read-create | current | The OSPFv3 interface type. |
| 1.3.6.1.4.1.2011.5.25.147.1.6.1.5 | ColumnhwOspfv3IfAdminStatus | read-create | current | The OSPFv3 interface's administrative status. The value formed on the interface, and the interface will be advertised as an internal route to some area. The va… |
| 1.3.6.1.4.1.2011.5.25.147.1.6.1.6 | ColumnhwOspfv3IfRtrPriority | read-create | current | The priority of this interface. Used in multi-access networks, this field is used in the designated router election algorithm. The value 0 signifies that the r… |
| 1.3.6.1.4.1.2011.5.25.147.1.6.1.7 | ColumnhwOspfv3IfTransitDelay | read-create | current | The estimated number of seconds it takes to transmit a link state update packet over this interface. |
| 1.3.6.1.4.1.2011.5.25.147.1.6.1.8 | ColumnhwOspfv3IfRetransInterval | read-create | current | The number of seconds between link state advertisement retransmissions, for adjacencies belonging to this interface. This value is also used when retransmittin… |
| 1.3.6.1.4.1.2011.5.25.147.1.6.1.9 | ColumnhwOspfv3IfHelloInterval | read-create | current | The length of time, in seconds, between the Hello packets that the router sends on the interface. This value must be the same for all routers attached to a com… |
| 1.3.6.1.4.1.2011.5.25.147.1.6.1.10 | ColumnhwOspfv3IfRtrDeadInterval | read-create | current | The number of seconds that a router's Hello packets have not been seen before its neighbors declare the router down on the interface. This should be some multi… |
| 1.3.6.1.4.1.2011.5.25.147.1.6.1.11 | ColumnhwOspfv3IfState | read-only | current | The OSPFv3 Interface State. |
| 1.3.6.1.4.1.2011.5.25.147.1.6.1.12 | ColumnhwOspfv3IfDesignatedRouter | read-only | current | The Router ID of the Designated Router. |
| 1.3.6.1.4.1.2011.5.25.147.1.6.1.13 | ColumnhwOspfv3IfBackupDesignatedRouter | read-only | current | The Router ID of the Backup Designated Router. |
| 1.3.6.1.4.1.2011.5.25.147.1.6.1.14 | ColumnhwOspfv3IfEvents | read-only | current | The number of times this OSPFv3 interface has changed its state, or an error has occurred. |
| 1.3.6.1.4.1.2011.5.25.147.1.6.1.15 | ColumnhwOspfv3IfRowStatus | read-create | current | This object permits management of the table by facilitating actions such as row creation, construction and destruction. The value of this object has no effect … |
| 1.3.6.1.4.1.2011.5.25.147.1.6.1.16 | ColumnhwOspfv3IfMetricValue | read-create | current | The metric assigned to this interface. The default value of the Metric is Reference Bandwidth / ifSpeed. The value of the reference bandwidth is configured by … |
| 1.3.6.1.4.1.2011.5.25.147.1.6.1.17 | ColumnhwOspfv3IfLinkScopeLsaCount | read-only | current | The total number of Link-Scope link state advertisements in this link's link state database. |
| 1.3.6.1.4.1.2011.5.25.147.1.6.1.18 | ColumnhwOspfv3IfLinkLsaCksumSum | read-only | current | The 32-bit unsigned sum of the Link-Scope link state advertisements' LS checksums contained in this link's link state database. The sum can be used to determin… |
| 1.3.6.1.4.1.2011.5.25.147.1.6.1.19 | ColumnhwOspfv3IfPollInterval | read-create | current | The larger time interval, in seconds, between the Hello packets sent to an inactive non-broadcast multi-access neighbor. |
| 1.3.6.1.4.1.2011.5.25.147.1.6.1.20 | ColumnhwOspfv3IfMulticastForwarding | read-create | current | The way multicasts should forwarded on this interface; not forwarded, forwarded as data link multicasts, or forwarded as data link unicasts. Data link multicas… |
| 1.3.6.1.4.1.2011.5.25.147.1.7 | TablehwOspfv3VirtIfTable | not-accessible | current | Information about this router's virtual interfaces. |
| 1.3.6.1.4.1.2011.5.25.147.1.7.1 | RowhwOspfv3VirtIfEntry | not-accessible | current | Information about a single Virtual Interface. |
| 1.3.6.1.4.1.2011.5.25.147.1.7.1.1 | ColumnhwOspfv3VirtIfAreaId | not-accessible | current | The Transit Area that the Virtual Link traverses. By definition, this is not Area 0 |
| 1.3.6.1.4.1.2011.5.25.147.1.7.1.2 | ColumnhwOspfv3VirtIfNeighbor | not-accessible | current | The Router ID of the Virtual Neighbor. |
| 1.3.6.1.4.1.2011.5.25.147.1.7.1.3 | ColumnhwOspfv3VirtIfIndex | read-only | current | The local interface index assigned to this OSPFv3 virtual interface. It is advertised in Hello's sent over the virtual link and in the router's router-LSAs. |
| 1.3.6.1.4.1.2011.5.25.147.1.7.1.4 | ColumnhwOspfv3VirtIfInstId | read-only | current | Specifies the interface instance ID to be used for the virtual interface. This ID has local link significance only. |
| 1.3.6.1.4.1.2011.5.25.147.1.7.1.5 | ColumnhwOspfv3VirtIfTransitDelay | read-create | current | The estimated number of seconds it takes to transmit a link state update packet over this interface. |
| 1.3.6.1.4.1.2011.5.25.147.1.7.1.6 | ColumnhwOspfv3VirtIfRetransInterval | read-create | current | The number of seconds between link state advertisement retransmissions, for adjacencies belonging to this interface. This value is also used when retransmittin… |
| 1.3.6.1.4.1.2011.5.25.147.1.7.1.7 | ColumnhwOspfv3VirtIfHelloInterval | read-create | current | The length of time, in seconds, between the Hello packets that the router sends on the interface. This value must be the same for the virtual neighbor. |
| 1.3.6.1.4.1.2011.5.25.147.1.7.1.8 | ColumnhwOspfv3VirtIfRtrDeadInterval | read-create | current | The number of seconds that a router's Hello packets have not been seen before its neighbors declare the router down. This should be some multiple of the Hello … |
| 1.3.6.1.4.1.2011.5.25.147.1.7.1.9 | ColumnhwOspfv3VirtIfState | read-only | current | OSPFv3 virtual interface states. The same encoding as the hwOspfv3IfTable is used. |
| 1.3.6.1.4.1.2011.5.25.147.1.7.1.10 | ColumnhwOspfv3VirtIfEvents | read-only | current | The number of state changes or error events on this Virtual Link |
| 1.3.6.1.4.1.2011.5.25.147.1.7.1.11 | ColumnhwOspfv3VirtIfRowStatus | read-create | current | This object permits management of the table by facilitating actions such as row creation, construction and destruction. The value of this object has no effect … |
| 1.3.6.1.4.1.2011.5.25.147.1.7.1.12 | ColumnhwOspfv3VirtIfLinkScopeLsaCount | read-only | current | The total number of Link-Scope link state advertisements in this virtual link's link state database. |
| 1.3.6.1.4.1.2011.5.25.147.1.7.1.13 | ColumnhwOspfv3VirtIfLinkLsaCksumSum | read-only | current | The 32-bit unsigned sum of the Link-Scope link-state advertisements' LS checksums contained in this virtual link's link-state database. The sum can be used to … |
| 1.3.6.1.4.1.2011.5.25.147.1.8 | TablehwOspfv3NbrTable | not-accessible | current | A table of non-virtual neighbor information. |
| 1.3.6.1.4.1.2011.5.25.147.1.8.1 | RowhwOspfv3NbrEntry | not-accessible | current | The information regarding a single neighbor. |
| 1.3.6.1.4.1.2011.5.25.147.1.8.1.1 | ColumnhwOspfv3NbrIfIndex | not-accessible | current | The local link ID of the link over which the neighbor can be reached. |
| 1.3.6.1.4.1.2011.5.25.147.1.8.1.2 | ColumnhwOspfv3NbrIfInstId | not-accessible | current | Interface instance over which the neighbor can be reached. This ID has local link significance only. |
| 1.3.6.1.4.1.2011.5.25.147.1.8.1.3 | ColumnhwOspfv3NbrRtrId | not-accessible | current | A 32-bit integer uniquely identifying the neighboring router in the Autonomous System. |
| 1.3.6.1.4.1.2011.5.25.147.1.8.1.4 | ColumnhwOspfv3NbrAddressType | read-only | current | The address type of ospfv3NbrAddress. Only IPv6 addresses without zone index are expected. |
| 1.3.6.1.4.1.2011.5.25.147.1.8.1.5 | ColumnhwOspfv3NbrAddress | read-only | current | The IPv6 address of the neighbor associated with the local link. |
| 1.3.6.1.4.1.2011.5.25.147.1.8.1.6 | ColumnhwOspfv3NbrOptions | read-only | current | A Bit Mask corresponding to the neighbor's options field. |
| 1.3.6.1.4.1.2011.5.25.147.1.8.1.7 | ColumnhwOspfv3NbrPriority | read-only | current | The priority of this neighbor in the designated router election algorithm. The value 0 signifies that the neighbor is not eligible to become the designated rou… |
| 1.3.6.1.4.1.2011.5.25.147.1.8.1.8 | ColumnhwOspfv3NbrState | read-only | current | The State of the relationship with this Neighbor. |
| 1.3.6.1.4.1.2011.5.25.147.1.8.1.9 | ColumnhwOspfv3NbrEvents | read-only | current | The number of times this neighbor relationship has changed state, or an error has occurred. |
| 1.3.6.1.4.1.2011.5.25.147.1.8.1.10 | ColumnhwOspfv3NbrLsRetransQLen | read-only | current | The current length of the retransmission queue. |
| 1.3.6.1.4.1.2011.5.25.147.1.8.1.11 | ColumnhwOspfv3NbrHelloSuppressed | read-only | current | Indicates whether Hellos are being suppressed to the neighbor |
| 1.3.6.1.4.1.2011.5.25.147.1.8.1.12 | ColumnhwOspfv3NbrIfId | read-only | current | The interface ID that the neighbor advertises in its Hello Packets on this link, that is, the neighbor's local interface index. |
| 1.3.6.1.4.1.2011.5.25.147.1.8.1.13 | ColumnhwOspfv3NbrRestartHelperStatus | read-only | current | Indicates whether the router is acting as a Graceful restart helper for the neighbor. |
| 1.3.6.1.4.1.2011.5.25.147.1.8.1.14 | ColumnhwOspfv3NbrRestartHelperAge | read-only | current | Remaining time in current OSPFv3 Graceful restart interval, if the router is acting as a restart helper for the neighbor. |
| 1.3.6.1.4.1.2011.5.25.147.1.8.1.15 | ColumnhwOspfv3NbrRestartHelperExitRc | read-only | current | Describes the outcome of the last attempt at acting as a Graceful restart helper for the neighbor. none:............no restart has yet been attempted. inProgre… |
| 1.3.6.1.4.1.2011.5.25.147.1.9 | TablehwOspfv3CfgNbrTable | not-accessible | current | A table of configured, non-virtual neighbor information. |
| 1.3.6.1.4.1.2011.5.25.147.1.9.1 | RowhwOspfv3CfgNbrEntry | not-accessible | current | The information regarding a single configured neighbor or neighbor discovered by lower-level protocols such as Inverse Neighbor Discovery. |
| 1.3.6.1.4.1.2011.5.25.147.1.9.1.1 | ColumnhwOspfv3CfgNbrIfIndex | not-accessible | current | The local link ID of the link over which the neighbor can be reached. |
| 1.3.6.1.4.1.2011.5.25.147.1.9.1.2 | ColumnhwOspfv3CfgNbrIfInstId | not-accessible | current | Interface instance over which the neighbor can be reached. This ID has local link significance only. |
| 1.3.6.1.4.1.2011.5.25.147.1.9.1.3 | ColumnhwOspfv3CfgNbrRtrId | not-accessible | current | A 32-bit integer uniquely identifying the static neighbor router in the Autonomous System. |
| 1.3.6.1.4.1.2011.5.25.147.1.9.1.4 | ColumnhwOspfv3CfgNbrPriority | read-create | current | The priority of this neighbor in the designated router election algorithm. The value 0 signifies that the neighbor is not eligible to become the designated rou… |
| 1.3.6.1.4.1.2011.5.25.147.1.9.1.5 | ColumnhwOspfv3CfgNbrRowStatus | read-create | current | This object permits management of the table by facilitating actions such as row creation, construction and destruction. The value of this object has no effect … |
| 1.3.6.1.4.1.2011.5.25.147.1.10 | TablehwOspfv3VirtNbrTable | not-accessible | current | A table of virtual neighbor information. |
| 1.3.6.1.4.1.2011.5.25.147.1.10.1 | RowhwOspfv3VirtNbrEntry | not-accessible | current | Virtual neighbor information. |
| 1.3.6.1.4.1.2011.5.25.147.1.10.1.1 | ColumnhwOspfv3VirtNbrArea | not-accessible | current | The Transit Area Identifier. |
| 1.3.6.1.4.1.2011.5.25.147.1.10.1.2 | ColumnhwOspfv3VirtNbrRtrId | not-accessible | current | A 32-bit integer uniquely identifying the neighboring router in the Autonomous System. |
| 1.3.6.1.4.1.2011.5.25.147.1.10.1.3 | ColumnhwOspfv3VirtNbrIfIndex | read-only | current | The local interface ID for the virtual link over which the neighbor can be reached. |
| 1.3.6.1.4.1.2011.5.25.147.1.10.1.4 | ColumnhwOspfv3VirtNbrIfInstId | read-only | current | The interface instance for the virtual link over which the neighbor can be reached. |
| 1.3.6.1.4.1.2011.5.25.147.1.10.1.5 | ColumnhwOspfv3VirtNbrAddressType | read-only | current | The address type of ospfv3VirtNbrAddress. Only IPv6 addresses without zone index are expected. |
| 1.3.6.1.4.1.2011.5.25.147.1.10.1.6 | ColumnhwOspfv3VirtNbrAddress | read-only | current | The IPv6 address advertised by this Virtual Neighbor. It must be a Global scope address. |
| 1.3.6.1.4.1.2011.5.25.147.1.10.1.7 | ColumnhwOspfv3VirtNbrOptions | read-only | current | A Bit Mask corresponding to the neighbor's options field. |
| 1.3.6.1.4.1.2011.5.25.147.1.10.1.8 | ColumnhwOspfv3VirtNbrState | read-only | current | The state of the Virtual Neighbor Relationship. |
| 1.3.6.1.4.1.2011.5.25.147.1.10.1.9 | ColumnhwOspfv3VirtNbrEvents | read-only | current | The number of times this virtual link has changed its state, or an error has occurred. |
| 1.3.6.1.4.1.2011.5.25.147.1.10.1.10 | ColumnhwOspfv3VirtNbrLsRetransQLen | read-only | current | The current length of the retransmission queue. |
| 1.3.6.1.4.1.2011.5.25.147.1.10.1.11 | ColumnhwOspfv3VirtNbrHelloSuppressed | read-only | current | Indicates whether Hellos are being suppressed to the neighbor |
| 1.3.6.1.4.1.2011.5.25.147.1.10.1.12 | ColumnhwOspfv3VirtNbrIfId | read-only | current | The interface ID that the neighbor advertises in its Hello Packets on this virtual link, that is, the neighbor's local interface ID. |
| 1.3.6.1.4.1.2011.5.25.147.1.10.1.13 | ColumnhwOspfv3VirtNbrRestartHelperStatus | read-only | current | Indicates whether the router is acting as a Graceful restart helper for the neighbor. |
| 1.3.6.1.4.1.2011.5.25.147.1.10.1.14 | ColumnhwOspfv3VirtNbrRestartHelperAge | read-only | current | Remaining time in current OSPFv3 Graceful restart interval, if the router is acting as a restart helper for the neighbor. |
| 1.3.6.1.4.1.2011.5.25.147.1.10.1.15 | ColumnhwOspfv3VirtNbrRestartHelperExitRc | read-only | current | Describes the outcome of the last attempt at acting as a Graceful restart helper for the neighbor. none:............no restart has yet been attempted. inProgre… |
| 1.3.6.1.4.1.2011.5.25.147.1.11 | TablehwOspfv3AreaAggregateTable | not-accessible | current | A range of IPv6 prefixes specified by a prefix/prefix length pair. Note that if ranges are configured such that one range subsumes another range the most speci… |
| 1.3.6.1.4.1.2011.5.25.147.1.11.1 | RowhwOspfv3AreaAggregateEntry | not-accessible | current | A range of IPv6 prefixes specified by a prefix/prefix length pair. Note that if ranges are configured such that one range subsumes another range the most speci… |
| 1.3.6.1.4.1.2011.5.25.147.1.11.1.1 | ColumnhwOspfv3AreaAggregateAreaId | not-accessible | current | The Area the Address Aggregate is to be found within. |
| 1.3.6.1.4.1.2011.5.25.147.1.11.1.2 | ColumnhwOspfv3AreaAggregateAreaLsdbType | not-accessible | current | The type of the Address Aggregate. This field specifies the Area Lsdb type that this Address Aggregate applies to. |
| 1.3.6.1.4.1.2011.5.25.147.1.11.1.4 | ColumnhwOspfv3AreaAggregatePrefixType | not-accessible | current | The prefix type of ospfv3AreaAggregatePrefix. Only IPv6 addresses are expected. |
| 1.3.6.1.4.1.2011.5.25.147.1.11.1.5 | ColumnhwOspfv3AreaAggregatePrefix | not-accessible | current | The IPv6 Prefix. |
| 1.3.6.1.4.1.2011.5.25.147.1.11.1.6 | ColumnhwOspfv3AreaAggregatePrefixLength | not-accessible | current | The length of the prefix (in bits). A prefix can not be shorter than 0 bits. |
| 1.3.6.1.4.1.2011.5.25.147.1.11.1.7 | ColumnhwOspfv3AreaAggregateRowStatus | read-create | current | This object permits management of the table by facilitating actions such as row creation, construction and destruction. The value of this object has no effect … |
| 1.3.6.1.4.1.2011.5.25.147.1.11.1.8 | ColumnhwOspfv3AreaAggregateEffect | read-create | current | Prefixes subsumed by ranges either trigger the advertisement of the indicated aggregate (advertiseMatching), or result in the prefix not being advertised at al… |
| 1.3.6.1.4.1.2011.5.25.147.1.12 | NodehwOspfv3NotificationEntry | |||
| 1.3.6.1.4.1.2011.5.25.147.1.12.1 | ScalarhwOspfv3ConfigErrorType | accessible-for-notify | current | Potential types of configuration conflicts. Used by the ospfv3ConfigError and ospfv3ConfigVirtError notifications. When the last value of a notification using … |
| 1.3.6.1.4.1.2011.5.25.147.1.12.2 | ScalarhwOspfv3PacketType | accessible-for-notify | current | OSPFv3 packet types. When the last value of a notification using this object is needed, but no notifications of that type have been sent, the value pertaining … |
| 1.3.6.1.4.1.2011.5.25.147.1.12.3 | ScalarhwOspfv3PacketSrc | accessible-for-notify | current | The IPv6 address of an inbound packet that cannot be identified by a neighbor instance. When the last value of a notification using this object is needed, but … |
| 1.3.6.1.4.1.2011.5.25.147.1.12.4 | ScalarhwOspfv3IfName | accessible-for-notify | current | The interface name |
| 1.3.6.1.4.1.2011.5.25.147.1.12.5 | ScalarhwOspfv3IfStateChgReason | accessible-for-notify | current | Interface state change reason. |
| 1.3.6.1.4.1.2011.5.25.147.1.12.6 | ScalarhwOspfv3NbrStateChgReason | accessible-for-notify | current | Neighbor state change reason. |
| 1.3.6.1.4.1.2011.5.25.147.1.12.7 | ScalarhwOspfv3ProcessId | read-only | current | The process ID indicates the OSPFv3 process number. The value ranges from 1 to 4294967295. |
| 1.3.6.1.4.1.2011.5.25.147.1.12.8 | ScalarhwOspfv3AreaIdIndex | read-only | current | A 32-bit integer uniquely identifying an area. Area ID 0 is used for the OSPFv3 backbone. |
| 1.3.6.1.4.1.2011.5.25.147.1.12.9 | ScalarhwOspfv3NewRouterId | read-only | current | A 32-bit integer uniquely identifying the router in the Autonomous System. To ensure uniqueness, this may default to the value of one of the router's IPv4 host… |
| 1.3.6.1.4.1.2011.5.25.147.1.12.10 | ScalarhwOspfv3PeerFlappingSuppressStatus | accessible-for-notify | current | his object indicates the mode of the OSPFv3 neighbor relationship flapping suppression. none(1): OSPFv3 neighbor relationship flapping suppression is not start… |
| 1.3.6.1.4.1.2011.5.25.147.1.12.11 | ScalarhwOspfv3PeerFlappingSuppressReason | accessible-for-notify | current | The reason of peer flapping suppress status change. |
| 1.3.6.1.4.1.2011.5.25.147.1.12.12 | ScalarhwOspfv3LsaId | read-only | current | A 32-bit integer uniquely identifies an area. LSA-ID 0.0.0.0 is used for the OSPF LSA. |
| 1.3.6.1.4.1.2011.5.25.147.1.12.13 | ScalarhwOspfv3LsaAge | read-only | current | This age of the ospf lsa. |
| 1.3.6.1.4.1.2011.5.25.147.1.12.14 | ScalarhwOspfv3PurgeHostName | accessible-for-notify | current | This object indicates the name of an OSPFv3 router which purge OSPFv3 routes. |
| 1.3.6.1.4.1.2011.5.25.147.1.12.15 | ScalarhwOspfv3PurgeIpAddress | accessible-for-notify | current | This object indicates the IP address of an OSPFv3 router which purge OSPFv3 routes. |
| 1.3.6.1.4.1.2011.5.25.147.1.12.16 | ScalarhwOspfv3PurgeRouterId | accessible-for-notify | current | This object indicates the 32-bit integer that uniquely identifies the router in the Autonomous System. |
| 1.3.6.1.4.1.2011.5.25.147.1.12.17 | ScalarhwOspfv3FlushLsaNum | accessible-for-notify | current | This object indicates the number of LSAs deleted by the local device or another device. |
| 1.3.6.1.4.1.2011.5.25.147.1.12.18 | ScalarhwOspfv3AffectedNodeNum | accessible-for-notify | current | This object indicates the number of affected node when OSPFv3 routes were deleted. |
| 1.3.6.1.4.1.2011.5.25.147.1.12.19 | ScalarhwOspfv3TotalNodeNum | accessible-for-notify | current | This object indicates the total number of node in the System. |
| 1.3.6.1.4.1.2011.5.25.147.1.12.20 | ScalarhwOspfv3PurgeStatPeriod | accessible-for-notify | current | This object indicates the period interval for purge statistic. |
| 1.3.6.1.4.1.2011.5.25.147.1.12.21 | ScalarhwOspfv3RuledOutDeviceNum | accessible-for-notify | current | This object indicates the number of node ruled out when checking faulty device. |
| 1.3.6.1.4.1.2011.5.25.147.1.12.22 | ScalarhwOspfv3PurgeHostName1 | accessible-for-notify | current | This object indicates the name of an OSPFv3 router which maybe purge OSPFv3 routes. |
| 1.3.6.1.4.1.2011.5.25.147.1.12.23 | ScalarhwOspfv3PurgeHostName2 | accessible-for-notify | current | This object indicates the name of an OSPFv3 router which maybe purge OSPFv3 routes. |
| 1.3.6.1.4.1.2011.5.25.147.1.12.24 | ScalarhwOspfv3PurgeHostName3 | accessible-for-notify | current | This object indicates the name of an OSPFv3 router which maybe purge OSPFv3 routes. |
| 1.3.6.1.4.1.2011.5.25.147.1.12.25 | ScalarhwOspfv3PurgeIpAddress1 | accessible-for-notify | current | This object indicates the IP address of an OSPFv3 router which maybe purge OSPFv3 routes. |
| 1.3.6.1.4.1.2011.5.25.147.1.12.26 | ScalarhwOspfv3PurgeIpAddress2 | accessible-for-notify | current | This object indicates the IP address of an OSPFv3 router which maybe purge OSPFv3 routes. |
| 1.3.6.1.4.1.2011.5.25.147.1.12.27 | ScalarhwOspfv3PurgeIpAddress3 | accessible-for-notify | current | This object indicates the IP address of an OSPFv3 router which maybe purge OSPFv3 routes. |
| 1.3.6.1.4.1.2011.5.25.147.1.12.28 | ScalarhwOspfv3PurgeRouterId1 | accessible-for-notify | current | This object indicates the 32-bit integer that uniquely identifies the router in the Autonomous System. |
| 1.3.6.1.4.1.2011.5.25.147.1.12.29 | ScalarhwOspfv3PurgeRouterId2 | accessible-for-notify | current | This object indicates the 32-bit integer that uniquely identifies the router in the Autonomous System. |
| 1.3.6.1.4.1.2011.5.25.147.1.12.30 | ScalarhwOspfv3PurgeRouterId3 | accessible-for-notify | current | This object indicates the 32-bit integer that uniquely identifies the router in the Autonomous System. |
| 1.3.6.1.4.1.2011.5.25.147.2 | NodehwOspfv3Conformance | |||
| 1.3.6.1.4.1.2011.5.25.147.2.1 | NodehwOspfv3Groups | |||
| 1.3.6.1.4.1.2011.5.25.147.2.1.1 | GrouphwOspfv3BasicGroup | current | These objects are used for managing/monitoring OSPFv3 global parameters. | |
| 1.3.6.1.4.1.2011.5.25.147.2.1.2 | GrouphwOspfv3AreaGroup | current | These objects are used for OSPFv3 systems supporting areas. | |
| 1.3.6.1.4.1.2011.5.25.147.2.1.3 | GrouphwOspfv3AsLsdbGroup | current | These objects are used for OSPFv3 systems that display their AS-scope link state database. | |
| 1.3.6.1.4.1.2011.5.25.147.2.1.4 | GrouphwOspfv3AreaLsdbGroup | current | These objects are used for OSPFv3 systems that display their Area-scope link state database. | |
| 1.3.6.1.4.1.2011.5.25.147.2.1.5 | GrouphwOspfv3LinkLsdbGroup | current | These objects are used for OSPFv3 systems that display their Link-scope link state database. | |
| 1.3.6.1.4.1.2011.5.25.147.2.1.6 | GrouphwOspfv3IfGroup | current | These interface objects used for managing/monitoring OSPFv3 interfaces. | |
| 1.3.6.1.4.1.2011.5.25.147.2.1.7 | GrouphwOspfv3VirtIfGroup | current | These virtual interface objects are used for managing/monitoring OSPFv3 virtual interfaces. | |
| 1.3.6.1.4.1.2011.5.25.147.2.1.8 | GrouphwOspfv3NbrGroup | current | These neighbor objects are used for managing/monitoring OSPFv3 neighbors. | |
| 1.3.6.1.4.1.2011.5.25.147.2.1.9 | GrouphwOspfv3CfgNbrGroup | current | These configured neighbor objects are used for managing/monitoring OSPFv3 configured neighbors. | |
| 1.3.6.1.4.1.2011.5.25.147.2.1.10 | GrouphwOspfv3VirtNbrGroup | current | These virtual neighbor objects are used for managing/monitoring OSPFv3 virtual neighbors. | |
| 1.3.6.1.4.1.2011.5.25.147.2.1.11 | GrouphwOspfv3AreaAggregateGroup | current | These area aggregate objects used required for aggregating OSPFv3 prefixes for summarization across areas. | |
| 1.3.6.1.4.1.2011.5.25.147.2.1.12 | GrouphwOspfv3NotificationObjectGroup | current | These objects are used to record notification parameters | |
| 1.3.6.1.4.1.2011.5.25.147.2.1.13 | GrouphwOspfv3NotificationGroup | current | This group is used for OSPFv3 notifications | |
| 1.3.6.1.4.1.2011.5.25.147.2.2 | NodehwOspfv3Compliances | |||
| 1.3.6.1.4.1.2011.5.25.147.2.2.1 | CompliancehwOspfv3Compliance | current | The compliance statement | |
| 1.3.6.1.4.1.2011.5.25.147.2.2.2 | CompliancehwOspfv3ReadOnlyCompliance | read-only | current | When this MIB module is implemented without support for read-create (i.e., in read-only mode), the implementation can claim read-only compliance. Such a device… |
Type Definitions
| Name | Syntax | Status | Description |
|---|---|---|---|
| HWHelloRange | Integer32 (0..65535) | current | The range of intervals on which hello messages are exchanged. |
| HWOspfv3AreaIdTc | Unsigned32 (0..'FFFFFFFF'h) | current | An OSPFv3 Area Identifier |
| HWOspfv3DeadIntRangeTc | Unsigned32 (0..'FFFF'h) | current | The range, in seconds, of dead interval value. |
| HWOspfv3IfInstIdTc | Unsigned32 (0..255) | current | An OSPFv3 interface instance ID |
| HWOspfv3LsaAgeTC | Unsigned32 (0..3600 | 32768..36368) | current | The age of the link state advertisement in seconds. The high-order bit of the LS age field is considered the DoNotAge bit for support of on-demand circuits. |
| HWOspfv3LsaSequenceTC | Integer32 | current | The sequence number field is a signed 32-bit integer. It is used to detect old and duplicate link state advertisements. The space of sequence numbers is linearly ordered. The larger the sequence number, the more recent … |
| HWOspfv3LsIdTC | Unsigned32 (1..'FFFFFFFF'h) | current | A unique 32-bit identifier of the piece of the routing domain that is being described by a link state advertisement. In contrast to OSPFv2, the Link State ID (LSID) has no addressing semantics. |
| HWOspfv3RouterIdTc | Unsigned32 (0..'FFFFFFFF'h) | current | A 32-bit, unsigned integer uniquely identifying the router in the Autonomous System. To ensure uniqueness, this may default to the value of one of the router's IPv4 host addresses if IPv4 is configured on the router. |
| HWOspfv3UpToRefreshIntervalTc | Unsigned32 (0..3600) | current | The values one might be able to configure for variables bounded by the Refresh Interval |