HUAWEI-PORT-MIB
1042 objects
The private mib file includes the general extent information of the device.hwDatacomm(157).hwPortMIB
Imported Objects
| ENTITY-MIB | entPhysicalName |
| HUAWEI-GTL-MIB | hwGtlItemName |
| HUAWEI-IMA-MIB | ImaFrameLength ImaGroupState |
| HUAWEI-MIB | hwDatacomm |
| IF-MIB | InterfaceIndex |
| P-BRIDGE-MIB | EnabledStatus |
| SNMPv2-CONF | MODULE-COMPLIANCE NOTIFICATION-GROUP OBJECT-GROUP |
| SNMPv2-SMI | Counter64 Integer32 IpAddress MODULE-IDENTITY NOTIFICATION-TYPE OBJECT-TYPE Unsigned32 |
| SNMPv2-TC | DateAndTime RowStatus TEXTUAL-CONVENTION TruthValue |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.2011.5.25.157 | IdentityhwPortMIB | The private mib file includes the general extent information of the device.hwDatacomm(157).hwPortMIB | ||
| 1.3.6.1.4.1.2011.5.25.157.1 | NodehwPortMIBObjects | |||
| 1.3.6.1.4.1.2011.5.25.157.1.1 | NodehwEthernet | |||
| 1.3.6.1.4.1.2011.5.25.157.1.1.1 | TablehwEthernetTable | not-accessible | current | Indicates the physical attributes of the Ethernet interface. This table lists the physical attributes of various Ethernet interfaces. |
| 1.3.6.1.4.1.2011.5.25.157.1.1.1.1 | RowhwEthernetEntry | not-accessible | current | Indicates the physical attributes of the Ethernet interface. This table lists the physical attributes of various Ethernet interfaces. |
| 1.3.6.1.4.1.2011.5.25.157.1.1.1.1.1 | ColumnhwEthernetIfIndex | not-accessible | current | Interface index(es) of port(s) present on the device . |
| 1.3.6.1.4.1.2011.5.25.157.1.1.1.1.11 | ColumnhwEthernetLoopback | read-write | current | The local loopback of an Ethernet interface is used to test the interface itself. If an interface works in a normal situation, disable the local loopback. By d… |
| 1.3.6.1.4.1.2011.5.25.157.1.1.1.1.12 | ColumnhwEthernetPortType | read-write | current | Indicates the type of the Ethernet interface: an optical interface or an electrical interface. |
| 1.3.6.1.4.1.2011.5.25.157.1.1.1.1.13 | ColumnhwEthernetSpeedSet | read-write | current | Indicates the speed of the Ethernet interface. This parameter takes effect only on some Ethernet electrical interfaces rather than optical interfaces. The para… |
| 1.3.6.1.4.1.2011.5.25.157.1.1.1.1.14 | ColumnhwEthernetDuplex | read-write | current | Indicates the duplex mode of the Ethernet interface. An electrical Ethernet interface can work in half-duplex mode or full-duplex mode. An optical Ethernet can… |
| 1.3.6.1.4.1.2011.5.25.157.1.1.1.1.15 | ColumnhwEthernetNegotiation | read-write | current | Indicates the auto-negotiation mode of the Ethernet electrical interface. By default, auto-negotiation is enabled. The three objects, hwEthernetSpeedSet, hwEth… |
| 1.3.6.1.4.1.2011.5.25.157.1.1.1.1.16 | ColumnhwEthernetPortTypeOperate | read-write | current | Indicates the link type of the Ethernet interface. The type can be optical link or electrical link. This parameter takes effect only on specific Ethernet inter… |
| 1.3.6.1.4.1.2011.5.25.157.1.1.1.1.20 | ColumnhwEthernetClock | read-write | current | Indicates the mode of the clock. The mode can be master or slave. By default, the mode of a clock is slave. This parameter takes effect only on the WAN board. |
| 1.3.6.1.4.1.2011.5.25.157.1.1.1.1.21 | ColumnhwEthernetFlagJ0Mode | read-write | current | Before the 10 GE WAN board processes packets, the overhead byte must be configured on the interface. The overhead byte for the SDH frame, j0: Set section trace… |
| 1.3.6.1.4.1.2011.5.25.157.1.1.1.1.22 | ColumnhwEthernetFlagJ0Value | read-write | current | j01ByteMode Value. When hwEthernetFlagJ0Mode is set to j01ByteMode, this parameter takes effect. |
| 1.3.6.1.4.1.2011.5.25.157.1.1.1.1.23 | ColumnhwEthernetFlagJ0Trace | read-write | current | Set section trace byte. When hwEthernetFlagJ0Mode is set to j016ByteMode or j064ByteOrNullMode, this variable takes effect. When hwEthernetFlagJ0Mode is set to… |
| 1.3.6.1.4.1.2011.5.25.157.1.1.1.1.24 | ColumnhwEthernetFlagJ1Mode | read-write | current | Indicates the overhead byte of the SDH frame. j1:sets path trace byte. The default value is j116ByteMode(2) hwEthernetFlagJ1Trace NetEngine. |
| 1.3.6.1.4.1.2011.5.25.157.1.1.1.1.25 | ColumnhwEthernetFlagJ1Value | read-write | current | j11ByteMode Value. When hwEthernetFlagJ1Mode is set to j11ByteMode, this parameter takes effect. |
| 1.3.6.1.4.1.2011.5.25.157.1.1.1.1.26 | ColumnhwEthernetFlagJ1Trace | read-write | current | Set path trace byte. When hwEthernetFlagJ1Mode is set to j116ByteMode or j164ByteOrNullMode, this variable takes effect. When hwEthernetFlagJ1Mode is set to j1… |
| 1.3.6.1.4.1.2011.5.25.157.1.1.1.1.27 | ColumnhwEthernetFlagC2Value | read-write | current | Indicates the overhead byte of the SDH frame. c2: indicates the signal label byte. It is a hexdecimal value ranging from 00 to FF. The default value is 0x02. |
| 1.3.6.1.4.1.2011.5.25.157.1.1.1.1.31 | ColumnhwEthernetUpHoldTime | read-write | current | Indicates the response time to the event that the port turns Up. The units of hwEthernetUpHoldTime is millisecond. |
| 1.3.6.1.4.1.2011.5.25.157.1.1.1.1.32 | ColumnhwEthernetDownHoldTime | read-write | current | Indicates the response time to the event that the port turns Down. The units of hwEthernetDownHoldTime is millisecond. |
| 1.3.6.1.4.1.2011.5.25.157.1.1.1.1.33 | ColumnhwEthernetSubinterfaceStatisticEnable | read-write | current | Enable the statistical function of the sub-interface. |
| 1.3.6.1.4.1.2011.5.25.157.1.1.1.1.34 | ColumnhwEthernetFlowControl | read-write | current | Set flow control of this port. |
| 1.3.6.1.4.1.2011.5.25.157.1.1.1.1.35 | ColumnhwEthernetOffline | read-write | current | Set Line protocol state to down of this port. |
| 1.3.6.1.4.1.2011.5.25.157.1.1.1.1.36 | ColumnhwEthernetSetTransferMode | read-write | current | Set transfer mode of this port. |
| 1.3.6.1.4.1.2011.5.25.157.1.1.1.1.37 | ColumnhwEthernetJumboframeMaxLength | read-write | current | Set the jumboframe max length of this port. |
| 1.3.6.1.4.1.2011.5.25.157.1.1.1.1.38 | ColumnhwEthernetComboType | read-write | current | combo mode of this port. |
| 1.3.6.1.4.1.2011.5.25.157.1.1.1.1.39 | ColumnhwEthernetPortMode | read-only | current | Indicates combo mode of this port. |
| 1.3.6.1.4.1.2011.5.25.157.1.1.1.1.40 | ColumnhwEthernetNegotiationMode | read-write | current | Set negotiation-mode for phy of electronic GE port.The mode is uesed for synchronizing clock. |
| 1.3.6.1.4.1.2011.5.25.157.1.2 | NodehwPos | |||
| 1.3.6.1.4.1.2011.5.25.157.1.2.1 | TablehwPosTable | not-accessible | current | Indicates the physical attributes of the POS interface. This table lists the physical attributes of the POS interface. |
| 1.3.6.1.4.1.2011.5.25.157.1.2.1.1 | RowhwPosEntry | not-accessible | current | Indicates the physical attributes of the POS interface. This table lists the physical attributes of the POS interface. |
| 1.3.6.1.4.1.2011.5.25.157.1.2.1.1.1 | ColumnhwPosIfIndex | not-accessible | current | Interface index(es) of port(s) present on the device . |
| 1.3.6.1.4.1.2011.5.25.157.1.2.1.1.11 | ColumnhwPosLinkProtocol | read-write | current | Indicates the link layer protocol of the POS interface. By default, on a POS interface, PPP serves as the link layer protocol. |
| 1.3.6.1.4.1.2011.5.25.157.1.2.1.1.12 | ColumnhwPosFrameFormat | read-write | current | Indicates the frame type of the POS interface. By default, the frame type of the POS interface is SDH. This variable identifies whether a SONET or a SDH signal… |
| 1.3.6.1.4.1.2011.5.25.157.1.2.1.1.13 | ColumnhwPosLoopback | read-write | current | The local loopback of a POS interface is used to test the interface itself. If an interface works in a normal situation, disable the local loopback. By default… |
| 1.3.6.1.4.1.2011.5.25.157.1.2.1.1.14 | ColumnhwPosScramble | read-write | current | Indicates the scramble function of payload. By default, the scramble function of payload is enabled. |
| 1.3.6.1.4.1.2011.5.25.157.1.2.1.1.15 | ColumnhwPosClock | read-write | current | Indicates whether the clock is in master mode or slave mode. By default, the clock is in slave mode. |
| 1.3.6.1.4.1.2011.5.25.157.1.2.1.1.16 | ColumnhwPosCrcVerifyCode | read-write | current | Indicates the length of the CRC verity code. The default value is 32. |
| 1.3.6.1.4.1.2011.5.25.157.1.2.1.1.21 | ColumnhwPosFlagJ0Mode | read-write | current | Indicates the overhead byte of the SDH frame. j0: sets section trace byte. The default value is j016ByteMode(2);hwPosFlagJ0Trace:NetEngine. |
| 1.3.6.1.4.1.2011.5.25.157.1.2.1.1.22 | ColumnhwPosFlagJ0Value | read-write | current | Indicates the value of j01ByteMode. When hwPosFlagJ0Mode is set to j01ByteMode, hwPosFlagJ0Value takes effect. |
| 1.3.6.1.4.1.2011.5.25.157.1.2.1.1.23 | ColumnhwPosFlagJ0Trace | read-write | current | Set section trace byte. When hwPosFlagJ0Mode is set to j016ByteMode or j064ByteOrNullMode, this variable takes effect. When hwPosFlagJ0Mode is set to j016ByteM… |
| 1.3.6.1.4.1.2011.5.25.157.1.2.1.1.24 | ColumnhwPosFlagJ1Mode | read-write | current | Indicates the overhead byte of the SDH frame. j1: sets path trace byte. The default value is j116ByteMode(2);hwPosFlagJ1Trace:NetEngine. |
| 1.3.6.1.4.1.2011.5.25.157.1.2.1.1.25 | ColumnhwPosFlagJ1Value | read-write | current | Indicates the value of j11ByteMode. When hwPosFlagJ1Mode is set to j11ByteMode, hwPosFlagJ1Value takes effect. |
| 1.3.6.1.4.1.2011.5.25.157.1.2.1.1.26 | ColumnhwPosFlagJ1Trace | read-write | current | Set path trace byte. When hwPosFlagJ1Mode is set to j116ByteMode or j164ByteOrNullMode, this variable takes effect. When hwPosFlagJ1Mode is set to j116ByteMode… |
| 1.3.6.1.4.1.2011.5.25.157.1.2.1.1.27 | ColumnhwPosFlagC2Value | read-write | current | Indicates the overhead byte of the SDH frame. c2: indicates the signal label byte. It is a hexdecimal value ranging from 00 to FF. The default value is 0x02. |
| 1.3.6.1.4.1.2011.5.25.157.1.3 | NodehwCpos | |||
| 1.3.6.1.4.1.2011.5.25.157.1.3.1 | TablehwCposTable | not-accessible | current | Indicates the physical attributes of the CPOS interface. This table lists the physical attributes of the CPOS interface. |
| 1.3.6.1.4.1.2011.5.25.157.1.3.1.1 | RowhwCposEntry | not-accessible | current | Indicates the physical attributes of the CPOS interface. This table lists the physical attributes of the CPOS interface. |
| 1.3.6.1.4.1.2011.5.25.157.1.3.1.1.1 | ColumnhwCposIfIndex | not-accessible | current | Interface index(es) of port(s) present on the device . |
| 1.3.6.1.4.1.2011.5.25.157.1.3.1.1.11 | ColumnhwCposClock | read-write | current | Indicates whether the clock is in master mode or slave mode. By default, the clock is in slave mode. |
| 1.3.6.1.4.1.2011.5.25.157.1.3.1.1.12 | ColumnhwCposIfType | read-write | current | Indicates the interface type. |
| 1.3.6.1.4.1.2011.5.25.157.1.3.1.1.13 | ColumnhwCposFrameFormat | read-write | current | Indicates the frame type of the CPOS interface. By default, the frame type of the CPOS interface is SDH. |
| 1.3.6.1.4.1.2011.5.25.157.1.3.1.1.14 | ColumnhwCposMultiplex | read-write | current | Indicates the multiplex mode of the AUG. By default, the multiplex mode of the AUG is au-4. |
| 1.3.6.1.4.1.2011.5.25.157.1.3.1.1.15 | ColumnhwCposLoopback | read-write | current | Indicates the loopback function of the CPOS interface. By default, the loopback function is disabled. |
| 1.3.6.1.4.1.2011.5.25.157.1.3.1.1.21 | ColumnhwCposFlagJ0Mode | read-write | current | Indicates the overhead byte of the SDH frame. j0: sets section trace byte. The default value is j016ByteMode(2);hwCposFlagJ0Trace NetEngine. |
| 1.3.6.1.4.1.2011.5.25.157.1.3.1.1.22 | ColumnhwCposFlagJ0Value | read-write | current | j01ByteMode Value . When hwCposFlagJ0Mode is set to j01ByteMode, hwCposFlagJ0Value takes effect. |
| 1.3.6.1.4.1.2011.5.25.157.1.3.1.1.23 | ColumnhwCposFlagJ0Trace | read-write | current | Set section trace byte. When hwCposFlagJ0Mode is set to j016ByteMode or j064ByteOrNullMode, this variable takes effect. When hwCposFlagJ0Mode is set to j016Byt… |
| 1.3.6.1.4.1.2011.5.25.157.1.3.1.1.24 | ColumnhwCposFlagJ1Mode | read-write | current | Indicates the overhead byte of the SDH frame. j1: sets path trace byte. The default value is j116ByteMode(2);hwCposFlagJ1Trace NetEngine. |
| 1.3.6.1.4.1.2011.5.25.157.1.3.1.1.25 | ColumnhwCposFlagJ1Value | read-write | current | Indicates the value of j11ByteMode. When hwCposFlagJ1Mode is set to j11ByteMode, hwCposFlagJ1Value takes effect. |
| 1.3.6.1.4.1.2011.5.25.157.1.3.1.1.26 | ColumnhwCposFlagJ1Trace | read-write | current | Set path trace byte. When hwCposFlagJ1Mode is set to j116ByteMode or j164ByteOrNullMode, this variable takes effect. When hwCposFlagJ1Mode is set to j116ByteMo… |
| 1.3.6.1.4.1.2011.5.25.157.1.3.1.1.27 | ColumnhwCposFlagC2Value | read-write | current | Indicates the overhead byte of the SDH frame. c2: indicates the signal label byte. It is a hexdecimal value ranging from 00 to FF. The default value is 22(0x16… |
| 1.3.6.1.4.1.2011.5.25.157.1.3.1.1.28 | ColumnhwCposB1SdAlarmThreshold | read-write | current | The threshold of B1 threshold crossing alarm. |
| 1.3.6.1.4.1.2011.5.25.157.1.3.1.1.29 | ColumnhwCposB1ExcAlarmThreshold | read-write | current | The threshold of B1 threshold crossing alarm. |
| 1.3.6.1.4.1.2011.5.25.157.1.3.1.1.30 | ColumnhwCposB2SdAlarmThreshold | read-write | current | The threshold of B2 threshold crossing alarm. |
| 1.3.6.1.4.1.2011.5.25.157.1.3.1.1.31 | ColumnhwCposB2ExcAlarmThreshold | read-write | current | The threshold of B2 threshold crossing alarm. |
| 1.3.6.1.4.1.2011.5.25.157.1.3.1.1.32 | ColumnhwCposB3SdAlarmThreshold | read-write | current | The threshold of B3 threshold crossing alarm. |
| 1.3.6.1.4.1.2011.5.25.157.1.3.1.1.33 | ColumnhwCposB3ExcAlarmThreshold | read-write | current | The threshold of B3 threshold crossing alarm. |
| 1.3.6.1.4.1.2011.5.25.157.1.3.1.1.34 | ColumnhwCposLpBipSdAlarmThreshold | read-write | current | The threshold of BIP2 threshold crossing alarm. |
| 1.3.6.1.4.1.2011.5.25.157.1.3.1.1.35 | ColumnhwCposLpBipExcAlarmThreshold | read-write | current | The threshold of BIP2 threshold crossing alarm. |
| 1.3.6.1.4.1.2011.5.25.157.1.3.1.1.36 | ColumnhwCposHighPathNumber | read-only | current | Indicates the overhead byte of the SDH frame. c2: indicates the signal label byte. It is a hexdecimal value ranging from 00 to FF. The default value is 22(0x16… |
| 1.3.6.1.4.1.2011.5.25.157.1.3.1.1.37 | ColumnhwCposLowPathNumber | read-only | current | Indicates the overhead byte of the SDH frame. c2: indicates the signal label byte. It is a hexdecimal value ranging from 00 to FF. The default value is 22(0x16… |
| 1.3.6.1.4.1.2011.5.25.157.1.3.1.1.38 | ColumnhwCposMappingMode | read-write | current | Indicates the mapping mode of cpos port, default if h-mode(1). |
| 1.3.6.1.4.1.2011.5.25.157.1.3.1.1.39 | ColumnhwCposRxJ0Mode | read-only | current | Indicates the received J0 mode. |
| 1.3.6.1.4.1.2011.5.25.157.1.3.1.1.40 | ColumnhwCposRxJ1Mode | read-only | current | Indicates the received J1 mode. |
| 1.3.6.1.4.1.2011.5.25.157.1.3.1.1.41 | ColumnhwCposRxJ0Value | read-only | current | Indicates the received J0 value of 1-byte mode. |
| 1.3.6.1.4.1.2011.5.25.157.1.3.1.1.42 | ColumnhwCposRxJ1Value | read-only | current | Indicates the received J1 value of 1-byte mode. |
| 1.3.6.1.4.1.2011.5.25.157.1.3.1.1.43 | ColumnhwCposRxJ0Trace | read-only | current | Indicates the received J0 characters of 16-byte or 64-byte mode. |
| 1.3.6.1.4.1.2011.5.25.157.1.3.1.1.44 | ColumnhwCposRxJ1Trace | read-only | current | Indicates the received J1 characters of 16-byte or 64-byte mode. |
| 1.3.6.1.4.1.2011.5.25.157.1.3.1.1.45 | ColumnhwCposVc4Flag | read-only | current | The value of this object identifies whether a VC4 channel can be created on the CPOS interface. 0 indicates that no VC4 channel can be created on the CPOS inte… |
| 1.3.6.1.4.1.2011.5.25.157.1.3.2 | ScalarhwPortPhysicalHpIndex | accessible-for-notify | current | Indicates the higher order path number. |
| 1.3.6.1.4.1.2011.5.25.157.1.3.3 | ScalarhwPortPhysicalLpIndex | accessible-for-notify | current | Indicates the low order path number. |
| 1.3.6.1.4.1.2011.5.25.157.1.3.4 | TablehwCposLpTable | not-accessible | current | Description. |
| 1.3.6.1.4.1.2011.5.25.157.1.3.4.1 | RowhwCposLpEntry | not-accessible | current | Description. |
| 1.3.6.1.4.1.2011.5.25.157.1.3.4.1.1 | ColumnhwCposLpIfIndex | not-accessible | current | Description. |
| 1.3.6.1.4.1.2011.5.25.157.1.3.4.1.2 | ColumnhwCposLpId | not-accessible | current | Description. |
| 1.3.6.1.4.1.2011.5.25.157.1.3.4.1.3 | ColumnhwCposFlagJ2Mode | read-write | current | Description. |
| 1.3.6.1.4.1.2011.5.25.157.1.3.4.1.4 | ColumnhwCposFlagJ2Value | read-write | current | Description. |
| 1.3.6.1.4.1.2011.5.25.157.1.3.4.1.5 | ColumnhwCposFlagJ2Trace | read-write | current | Description. |
| 1.3.6.1.4.1.2011.5.25.157.1.3.4.1.6 | ColumnhwCposRxJ2Mode | read-only | current | Indicates the received J2 mode. |
| 1.3.6.1.4.1.2011.5.25.157.1.3.4.1.7 | ColumnhwCposRxJ2Value | read-only | current | Indicates the received J2 value of 1-byte mode. |
| 1.3.6.1.4.1.2011.5.25.157.1.3.4.1.8 | ColumnhwCposRxJ2Trace | read-only | current | Indicates the received J2 characters of 16-byte or 64-byte mode. |
| 1.3.6.1.4.1.2011.5.25.157.1.4 | NodehwDs0ChannelBundle | |||
| 1.3.6.1.4.1.2011.5.25.157.1.4.1 | TablehwDs0ChannelBundleTable | not-accessible | current | This table is used to bundle timeslots of CE1/CT1 interfaces. |
| 1.3.6.1.4.1.2011.5.25.157.1.4.1.1 | RowhwDs0ChannelBundleEntry | not-accessible | current | This table is used to bundle timeslots of CE1/CT1 interfaces. |
| 1.3.6.1.4.1.2011.5.25.157.1.4.1.1.1 | ColumnhwDs0ChannelBundleParentIfIndex | accessible-for-notify | current | Indicates the index of the parent interface. |
| 1.3.6.1.4.1.2011.5.25.157.1.4.1.1.2 | ColumnhwDs0ChannelBundleDs1ChannelId | accessible-for-notify | current | Indicates the channel ID. |
| 1.3.6.1.4.1.2011.5.25.157.1.4.1.1.3 | ColumnhwDs0ChannelBundleId | accessible-for-notify | current | Indicates the index number of the channel set. |
| 1.3.6.1.4.1.2011.5.25.157.1.4.1.1.11 | ColumnhwDs0ChannelBundleIfIndex | read-create | current | Indicates the index of the serial interface formed by the timeslot binding. |
| 1.3.6.1.4.1.2011.5.25.157.1.4.1.1.12 | ColumnhwDs0ChannelBundleTimeSlots | read-create | current | Indicates the number of the range of the timeslot to be bound. The value is an integer ranging from 0 to 31. Multiple timeslots are separated by ','. The range… |
| 1.3.6.1.4.1.2011.5.25.157.1.4.1.1.13 | ColumnhwDs0ChannelBundleSpeed | read-create | current | Configures the mode to configure the timeslots. If the parameter 56 k is selected, the timeslots are bound in the mode of N x 56 kbit/s. If the parameter 64 k … |
| 1.3.6.1.4.1.2011.5.25.157.1.4.1.1.14 | ColumnhwDs0ChannelBundleTimeSlot0 | read-create | current | Indicates the timeslot0 to be bound or a single channel. The ture value indicates it will be create TDM channel. |
| 1.3.6.1.4.1.2011.5.25.157.1.4.1.1.15 | ColumnhwDs0ChannelBundleIsMasterPW | read-only | current | Indicates if the pw configed on this port is master pw. |
| 1.3.6.1.4.1.2011.5.25.157.1.4.1.1.16 | ColumnhwDs0ChannelBundleMasterPWStatus | read-only | current | Indicates the status of master pw. |
| 1.3.6.1.4.1.2011.5.25.157.1.4.1.1.17 | ColumnhwDs0ChannelBundlePortName | read-only | current | Port name. |
| 1.3.6.1.4.1.2011.5.25.157.1.4.1.1.51 | ColumnhwDs0ChannelBundleRowStatus | read-create | current | This variable is used to create or delete an object. |
| 1.3.6.1.4.1.2011.5.25.157.1.5 | NodehwDs1 | |||
| 1.3.6.1.4.1.2011.5.25.157.1.5.1 | TablehwDs1Table | not-accessible | current | This table lists all E1/CE1 interfaces or T1/CT1 interfaces. After the mode of E3/CE3 interfaces or T3/CT3 interfaces is set to channelized, this table can be … |
| 1.3.6.1.4.1.2011.5.25.157.1.5.1.1 | RowhwDs1Entry | not-accessible | current | This table lists all E1/CE1 interfaces or T1/CT1 interfaces. After the mode of E3/CE3 interfaces or T3/CT3 interfaces is set to channelized, this table can be … |
| 1.3.6.1.4.1.2011.5.25.157.1.5.1.1.1 | ColumnhwDs1ParentIfIndex | not-accessible | current | Indicates the index of the parent interface. |
| 1.3.6.1.4.1.2011.5.25.157.1.5.1.1.2 | ColumnhwDs1ChannelId | accessible-for-notify | current | Indicates the channel ID. |
| 1.3.6.1.4.1.2011.5.25.157.1.5.1.1.3 | ColumnhwDs1IfIndex | not-accessible | current | Indicates the interface index. |
| 1.3.6.1.4.1.2011.5.25.157.1.5.1.1.11 | ColumnhwDs1ChannelType | read-create | current | Indicates the interface type. The type can be E1/CE1 or T1/CT1. |
| 1.3.6.1.4.1.2011.5.25.157.1.5.1.1.12 | ColumnhwDs1IfType | read-create | current | Indicates the interface tyep. e3: is multiplexed by CE3 interfaces. t3: is multiplexed by CT3 interfaces. cpos: is multiplexed by CPOS interfaces. atm: is mult… |
| 1.3.6.1.4.1.2011.5.25.157.1.5.1.1.13 | ColumnhwDs1Channelized | read-create | current | Indicates the working mode of the interface. true: indicates the channelized mode. false: indicates the clear channel mode. The default is true. |
| 1.3.6.1.4.1.2011.5.25.157.1.5.1.1.14 | ColumnhwDs1CodeType | read-create | current | Indicates the code type of the interface. ami: is short for Alternate Mark Inversion. hdb3: is short for High Density Bipolar of Order 3. b8zs: is short for Bi… |
| 1.3.6.1.4.1.2011.5.25.157.1.5.1.1.15 | ColumnhwDs1Clock | read-create | current | Indicates the clock mode of the interface. master: indicates that the clock works in master mode and uses the internal clock signal. slave: indicates that the … |
| 1.3.6.1.4.1.2011.5.25.157.1.5.1.1.16 | ColumnhwDs1FrameFormat | read-create | current | Indicates the frame format of the interface. crc4: indicates that the frame format is CRC4. no-crc4: indicates that the frame format is no-CRC4. sf: indicates … |
| 1.3.6.1.4.1.2011.5.25.157.1.5.1.1.17 | ColumnhwDs1Cable | read-create | current | The cable command takes effect only if the E1 interface card uses 75-ohm coaxial cable. The default is short. If no cable is connected, this parameter is displ… |
| 1.3.6.1.4.1.2011.5.25.157.1.5.1.1.18 | ColumnhwDs1Loopback | read-create | current | Enable the loopback function of the interface. local: enables the local loopback on the interface. remote: enables the remote loopback on the interface. payloa… |
| 1.3.6.1.4.1.2011.5.25.157.1.5.1.1.19 | ColumnhwDs1ClockRecoveryDomain | read-create | current | Indicates the clock recovery domain of the interface. |
| 1.3.6.1.4.1.2011.5.25.157.1.5.1.1.20 | ColumnhwDs1PWClockDomain | read-create | current | Indicates the clock recovery domain of the interface. |
| 1.3.6.1.4.1.2011.5.25.157.1.5.1.1.21 | ColumnhwDs1WorkMode | read-only | current | Indicates the clock recovery domain of the interface. |
| 1.3.6.1.4.1.2011.5.25.157.1.5.1.1.22 | ColumnhwDs1EsAlarmTriggerThreshold | read-write | current | The trigger threshold of code violation count threshold crossing alarm of E1 line side . |
| 1.3.6.1.4.1.2011.5.25.157.1.5.1.1.23 | ColumnhwDs1EsAlarmResumeThreshold | read-write | current | The resume threshold of code violation count threshold crossing alarm of E1 line side . |
| 1.3.6.1.4.1.2011.5.25.157.1.5.1.1.51 | ColumnhwDs1RowStatus | read-create | current | This variable is used to create or delete an object. |
| 1.3.6.1.4.1.2011.5.25.157.1.5.1.1.52 | ColumnhwDs1Lbo | read-create | current | The lbo of T1 port. Unit: db. the value is expanded 10 times,so the real value should be reduced 10 times |
| 1.3.6.1.4.1.2011.5.25.157.1.5.1.1.53 | ColumnhwDs1CableLength | read-create | current | The cableLength of T1 port. Unit: feet. |
| 1.3.6.1.4.1.2011.5.25.157.1.6 | NodehwDs3 | |||
| 1.3.6.1.4.1.2011.5.25.157.1.6.1 | TablehwDs3Table | not-accessible | current | This table lists all E3/CE3 interfaces or all T3/CT3 interfaces. |
| 1.3.6.1.4.1.2011.5.25.157.1.6.1.1 | RowhwDs3Entry | not-accessible | current | This table lists all E3/CE3 interfaces or all T3/CT3 interfaces. |
| 1.3.6.1.4.1.2011.5.25.157.1.6.1.1.1 | ColumnhwDs3ParentIfIndex | not-accessible | current | Indicates the index of the parent interface. |
| 1.3.6.1.4.1.2011.5.25.157.1.6.1.1.2 | ColumnhwDs3ChannelId | not-accessible | current | Indicates the index of the parent interface. |
| 1.3.6.1.4.1.2011.5.25.157.1.6.1.1.3 | ColumnhwDs3IfIndex | not-accessible | current | Indicates the interface index. |
| 1.3.6.1.4.1.2011.5.25.157.1.6.1.1.11 | ColumnhwDs3ChannelType | read-create | current | Indicates the interface type. The type can be E3/CE3 or T3/CT3. |
| 1.3.6.1.4.1.2011.5.25.157.1.6.1.1.12 | ColumnhwDs3IfType | read-create | current | Indicates the parent interface type of the interface. cpos: is multiplexed by CPOS interfaces. none: indicates the interface is a physical interface. The defau… |
| 1.3.6.1.4.1.2011.5.25.157.1.6.1.1.13 | ColumnhwDs3Channelized | read-create | current | Indicates the working mode of the interface. true: indicates the channelized mode. false: indicates the clear channel mode. The default is true. |
| 1.3.6.1.4.1.2011.5.25.157.1.6.1.1.14 | ColumnhwDs3Clock | read-create | current | Indicates the clock mode of the interface. master: indicates that the clock works in master mode and uses the internal clock signal. slave: indicates that the … |
| 1.3.6.1.4.1.2011.5.25.157.1.6.1.1.15 | ColumnhwDs3FrameFormat | read-create | current | Indicates the frame format of the interface. |
| 1.3.6.1.4.1.2011.5.25.157.1.6.1.1.16 | ColumnhwDs3Scramble | read-create | current | Indicates the scramble function of the interface. true: enables the scramble function. false: disables the scramble function. The default is false. |
| 1.3.6.1.4.1.2011.5.25.157.1.6.1.1.17 | ColumnhwDs3Cable | read-create | current | The cable command takes effect only if the E3 interface card uses 75-ohm coaxial cable. The default is short. If no cable is connected, this parameter is displ… |
| 1.3.6.1.4.1.2011.5.25.157.1.6.1.1.18 | ColumnhwDs3NationalBit | read-create | current | Indicates the national bit of the E3/CE3 interface. n0: indicates the national bit is 0 and the interface supports only the communication within a country. n1:… |
| 1.3.6.1.4.1.2011.5.25.157.1.6.1.1.19 | ColumnhwDs3Loopback | read-create | current | Enable the loopback function of the interface. local: enables the local loopback on the interface. remote: enables the remote loopback on the interface. payloa… |
| 1.3.6.1.4.1.2011.5.25.157.1.6.1.1.20 | ColumnhwDs3CreateSerial | read-create | current | Create serial interface from Ds3 interface. True create serial interface. False destroy serial interface. |
| 1.3.6.1.4.1.2011.5.25.157.1.6.1.1.51 | ColumnhwDs3RowStatus | read-create | current | This variable is used to create or delete an object. |
| 1.3.6.1.4.1.2011.5.25.157.1.7 | NodehwBundleSerial | |||
| 1.3.6.1.4.1.2011.5.25.157.1.7.1 | TablehwBundleSerialTable | not-accessible | current | Indicates the attribute of the serial interface formed by timeslots. This table lists the physical attributes of the serial interface. |
| 1.3.6.1.4.1.2011.5.25.157.1.7.1.1 | RowhwBundleSerialEntry | not-accessible | current | Indicates the attribute of the serial interface formed by timeslots. This table lists the physical attributes of the serial interface. |
| 1.3.6.1.4.1.2011.5.25.157.1.7.1.1.1 | ColumnhwBundleSerialIfIndex | not-accessible | current | Interface index(es) of serial(s) present on the device . |
| 1.3.6.1.4.1.2011.5.25.157.1.7.1.1.11 | ColumnhwBundleSerialLinkProtocol | read-write | current | The link-protocol of interface. The serial(s) always use PPP as its link-protocol for default. |
| 1.3.6.1.4.1.2011.5.25.157.1.7.1.1.12 | ColumnhwBundleSerialTimerHold | read-write | current | Indicates the interval for sending Keepalive packets from the serial interface to the peer. The default is 10 seconds. |
| 1.3.6.1.4.1.2011.5.25.157.1.7.1.1.13 | ColumnhwBundleSerialLoopback | read-write | current | true: enables the loopback on the serial interface. false: disables the loopback on the serial interface. By default, the loopback on the serial interface is d… |
| 1.3.6.1.4.1.2011.5.25.157.1.7.1.1.14 | ColumnhwBundleSerialCrcVerifyCode | read-write | current | Indicates the length of the CRC verify code. The default is 32. |
| 1.3.6.1.4.1.2011.5.25.157.1.8 | NodehwPhysicalPort | |||
| 1.3.6.1.4.1.2011.5.25.157.1.8.1 | TablehwPhysicalPortTable | not-accessible | current | Indicates the attribute of the physical port. |
| 1.3.6.1.4.1.2011.5.25.157.1.8.1.1 | RowhwPhysicalPortEntry | not-accessible | current | Indicates the attribute of the physical port. |
| 1.3.6.1.4.1.2011.5.25.157.1.8.1.1.1 | ColumnhwPhysicalPortIfIndex | accessible-for-notify | current | Interface index(es) of physical port(s) present on the device . |
| 1.3.6.1.4.1.2011.5.25.157.1.8.1.1.2 | ColumnhwPhysicalPortDelayTime | read-write | current | Indicates the port tx enabling delay time. The units of hwPhysicalPortDelayTime is millisecond. The default value is 0 ms. |
| 1.3.6.1.4.1.2011.5.25.157.1.8.1.1.3 | ColumnhwPhysicalPortDelayRemainTime | read-only | current | Indicates the remnant time of enabling port-tx. The units of hwPhysicalPortDelayTime is millisecond. |
| 1.3.6.1.4.1.2011.5.25.157.1.8.1.1.4 | ColumnhwPhysicalPortName | read-only | current | Indicates the physical port name. |
| 1.3.6.1.4.1.2011.5.25.157.1.8.1.1.5 | ColumnhwPhysicalPortInChassis | read-only | current | Indicates the physical port in chassis. |
| 1.3.6.1.4.1.2011.5.25.157.1.8.1.1.6 | ColumnhwPhysicalPortInSlot | read-only | current | Indicates the SlotID. |
| 1.3.6.1.4.1.2011.5.25.157.1.8.1.1.7 | ColumnhwPhysicalPortInCard | read-only | current | Indicates the CardID. |
| 1.3.6.1.4.1.2011.5.25.157.1.8.1.1.8 | ColumnhwPhysicalPortInPort | read-only | current | Indicates the PortID. |
| 1.3.6.1.4.1.2011.5.25.157.1.8.1.1.9 | ColumnhwPhysicalAutoShutLaserEnable | read-write | current | Indicates enable or disable the laser auto shut . Default is disable. |
| 1.3.6.1.4.1.2011.5.25.157.1.8.1.1.10 | ColumnhwPhysicalAutoShutLaserOpenInterval | read-write | current | Indicates the open interval of laser auto shut . The default value is 200 (unit: 10 ms). The value 2147483647 means that the interface doesn't support laser au… |
| 1.3.6.1.4.1.2011.5.25.157.1.8.1.1.11 | ColumnhwPhysicalAutoShutLaserCloseInterval | read-write | current | Indicates the close interval of laser auto shut . The default value is 6000 (unit: 10 ms). The value 2147483647 means that the interface doesn't support laser … |
| 1.3.6.1.4.1.2011.5.25.157.1.8.1.1.12 | ColumnhwPhysicalAutoShutLaserLongOpenInterval | read-write | current | Indicates the long open interval of laser auto shut . The default value is 9000 (unit: 10 ms). The value 2147483647 means that the interface doesn't support la… |
| 1.3.6.1.4.1.2011.5.25.157.1.8.1.1.13 | ColumnhwPhysicalLoopbackType | read-only | current | The current state of loopbackType in port. |
| 1.3.6.1.4.1.2011.5.25.157.1.8.1.1.14 | ColumnhwPhysicalShutLaser | read-write | current | Turn on or turn off the laser. |
| 1.3.6.1.4.1.2011.5.25.157.1.8.1.1.15 | ColumnhwPhysicalLaserStatus | read-only | current | The current status of the laser. |
| 1.3.6.1.4.1.2011.5.25.157.1.8.1.1.16 | ColumnhwPhysicalPortHoldUp | read-write | current | Indicates enable or disable the interface to remain Up , the default value is disable. |
| 1.3.6.1.4.1.2011.5.25.157.1.8.1.1.17 | ColumnhwPhysicalPortAlarmInverseEnable | read-write | current | Config port alarm inverse enable. |
| 1.3.6.1.4.1.2011.5.25.157.1.8.1.1.18 | ColumnhwPhysicalPortInVsId | read-only | current | VsId. |
| 1.3.6.1.4.1.2011.5.25.157.1.8.1.1.19 | ColumnhwPhysicalPortAlarmName | read-only | current | Indicates the physical port alarm name. |
| 1.3.6.1.4.1.2011.5.25.157.1.8.1.1.20 | ColumnhwInputRateChangeThresholdPercent | read-write | current | Indicates the threshold for the input rate change, in percentage. |
| 1.3.6.1.4.1.2011.5.25.157.1.8.1.1.21 | ColumnhwOutputRateChangeThresholdPercent | read-write | current | Indicates the threshold for the output rate change, in percentage. |
| 1.3.6.1.4.1.2011.5.25.157.1.8.1.1.22 | ColumnhwCurrentStatisticalPeriodRate | read-only | current | Indicates the rate in the current statistical period. |
| 1.3.6.1.4.1.2011.5.25.157.1.8.1.1.23 | ColumnhwLastStatisticalPeriodRate | read-only | current | Indicates the rate in the last statistical period. |
| 1.3.6.1.4.1.2011.5.25.157.1.8.1.1.24 | ColumnhwPortPhysicalRate | read-only | current | Indicates the current physical rate. |
| 1.3.6.1.4.1.2011.5.25.157.1.8.1.1.25 | ColumnhwLicenseType | read-only | current | Indicates the type of interface function-controlled license. |
| 1.3.6.1.4.1.2011.5.25.157.1.8.1.1.26 | ColumnhwMaxPortNum | read-only | current | Indicates the Maximum number of available interfaces |
| 1.3.6.1.4.1.2011.5.25.157.1.8.1.1.27 | ColumnhwUsedPortNum | read-only | current | Indicates the Number of interfaces in use. |
| 1.3.6.1.4.1.2011.5.25.157.1.8.1.1.28 | ColumnhwPhysicalPortMode | read-only | current | The current state of portMode in port. |
| 1.3.6.1.4.1.2011.5.25.157.1.8.1.1.29 | ColumnhwScadaGroupId | read-only | current | Indicates the scada group ID. |
| 1.3.6.1.4.1.2011.5.25.157.1.8.1.1.30 | ColumnhwPhysicalPortGroupID | read-only | current | Indicates the physical port group ID. |
| 1.3.6.1.4.1.2011.5.25.157.1.8.1.1.31 | ColumnhwPortTransModeReasonDescr | read-only | current | Indicates the physical port transmission mode different reason. |
| 1.3.6.1.4.1.2011.5.25.157.1.8.1.1.32 | ColumnhwAcBlockReason | read-only | current | Indicates the AC block reason. |
| 1.3.6.1.4.1.2011.5.25.157.1.8.2 | TablehwSDHRsMsPerfCurrentTable | not-accessible | current | Indicates the performance stat of the Regenerator Section. |
| 1.3.6.1.4.1.2011.5.25.157.1.8.2.1 | RowhwSDHRsMsPerfCurrentEntry | not-accessible | current | Indicates the performance stat of the Regenerator Section. |
| 1.3.6.1.4.1.2011.5.25.157.1.8.2.1.1 | ColumnhwSDHRsMsPerfCurrentIfIndex | not-accessible | current | Interface index(es) of port(s) present on the device . |
| 1.3.6.1.4.1.2011.5.25.157.1.8.2.1.2 | ColumnhwSDHRsMsPerfCurrentDataIndex | not-accessible | current | Data index(es) of port(s) present on the device . |
| 1.3.6.1.4.1.2011.5.25.157.1.8.2.1.3 | ColumnhwSDHRsPerfCurrentBBE | read-only | current | Regenerator Section Background Block Error. |
| 1.3.6.1.4.1.2011.5.25.157.1.8.2.1.4 | ColumnhwSDHRsPerfCurrentES | read-only | current | Regenerator Section Errored Second. |
| 1.3.6.1.4.1.2011.5.25.157.1.8.2.1.5 | ColumnhwSDHRsPerfCurrentSES | read-only | current | Regenerator Section Severely Errored Second. |
| 1.3.6.1.4.1.2011.5.25.157.1.8.2.1.6 | ColumnhwSDHRsPerfCurrentUAS | read-only | current | Regenerator section unavailable second. |
| 1.3.6.1.4.1.2011.5.25.157.1.8.2.1.7 | ColumnhwSDHMsPerfCurrentBBE | read-only | current | Multiplex Section Background Block Error. |
| 1.3.6.1.4.1.2011.5.25.157.1.8.2.1.8 | ColumnhwSDHMsPerfCurrentES | read-only | current | Multiplex Section Errored Second. |
| 1.3.6.1.4.1.2011.5.25.157.1.8.2.1.9 | ColumnhwSDHMsPerfCurrentSES | read-only | current | Multiplex Section Severely Errored Second. |
| 1.3.6.1.4.1.2011.5.25.157.1.8.2.1.10 | ColumnhwSDHMsPerfCurrentUAS | read-only | current | Multiplex Section Unavaliable Seconds. |
| 1.3.6.1.4.1.2011.5.25.157.1.8.2.1.11 | ColumnhwSDHMsPerfCurrentFEBBE | read-only | current | Multiplex Section Far end Background Block Error. |
| 1.3.6.1.4.1.2011.5.25.157.1.8.2.1.12 | ColumnhwSDHMsPerfCurrentFEES | read-only | current | Multiplex Section Far end Errored Second. |
| 1.3.6.1.4.1.2011.5.25.157.1.8.2.1.13 | ColumnhwSDHMsPerfCurrentFESES | read-only | current | Multiplex Section Far end Severely Errored Second. |
| 1.3.6.1.4.1.2011.5.25.157.1.8.2.1.14 | ColumnhwSDHMsPerfCurrentFEUAS | read-only | current | Multiplex Section Far end Unavaliable Seconds. |
| 1.3.6.1.4.1.2011.5.25.157.1.8.3 | TablehwSDHHpPerfCurrentTable | not-accessible | current | Indicates the performance stat of the Higher order Path. |
| 1.3.6.1.4.1.2011.5.25.157.1.8.3.1 | RowhwSDHHpPerfCurrentEntry | not-accessible | current | Indicates the performance stat of the Higher order Path. |
| 1.3.6.1.4.1.2011.5.25.157.1.8.3.1.1 | ColumnhwSDHHpPerfCurrentIfIndex | accessible-for-notify | current | Interface index(es) of port(s) present on the device . |
| 1.3.6.1.4.1.2011.5.25.157.1.8.3.1.2 | ColumnhwSDHHpPerfCurrentHpIndex | not-accessible | current | Higher order Path index(es) of port(s) present on the device . |
| 1.3.6.1.4.1.2011.5.25.157.1.8.3.1.3 | ColumnhwSDHHpPerfCurrentDataIndex | not-accessible | current | Data index(es) of port(s) present on the device . |
| 1.3.6.1.4.1.2011.5.25.157.1.8.3.1.4 | ColumnhwSDHHpPerfCurrentBBE | read-only | current | Multiplex Section Far end Unavaliable Seconds. |
| 1.3.6.1.4.1.2011.5.25.157.1.8.3.1.5 | ColumnhwSDHHpPerfCurrentES | read-only | current | Higher order Path Errored Second. |
| 1.3.6.1.4.1.2011.5.25.157.1.8.3.1.6 | ColumnhwSDHHpPerfCurrentSES | read-only | current | Higher order Path Severely Errored Second. |
| 1.3.6.1.4.1.2011.5.25.157.1.8.3.1.7 | ColumnhwSDHHpPerfCurrentUAS | read-only | current | Higher order Path Unavaliable Seconds. |
| 1.3.6.1.4.1.2011.5.25.157.1.8.3.1.8 | ColumnhwSDHHpPerfCurrentFEBBE | read-only | current | Higher order Path Far end Background Block Error. |
| 1.3.6.1.4.1.2011.5.25.157.1.8.3.1.9 | ColumnhwSDHHpPerfCurrentFEES | read-only | current | Higher order Path Far end Errored Second. |
| 1.3.6.1.4.1.2011.5.25.157.1.8.3.1.10 | ColumnhwSDHHpPerfCurrentFESES | read-only | current | Higher order Path Far end Severely Errored Second. |
| 1.3.6.1.4.1.2011.5.25.157.1.8.3.1.11 | ColumnhwSDHHpPerfCurrentFEUAS | read-only | current | Higher order Path Far end Unavaliable Seconds. |
| 1.3.6.1.4.1.2011.5.25.157.1.8.4 | TablehwSDHLpPerfCurrentTable | not-accessible | current | Indicates the performance stat of the Low order Path. |
| 1.3.6.1.4.1.2011.5.25.157.1.8.4.1 | RowhwSDHLpPerfCurrentEntry | not-accessible | current | Indicates the performance stat of the Low order Path. |
| 1.3.6.1.4.1.2011.5.25.157.1.8.4.1.1 | ColumnhwSDHLpPerfCurrentIfIndex | accessible-for-notify | current | Interface index(es) of port(s) present on the device . |
| 1.3.6.1.4.1.2011.5.25.157.1.8.4.1.2 | ColumnhwSDHLpPerfCurrentHpIndex | not-accessible | current | Higher order Path index(es) of port(s) present on the device . |
| 1.3.6.1.4.1.2011.5.25.157.1.8.4.1.3 | ColumnhwSDHLpPerfCurrentLpIndex | not-accessible | current | Low order Path index(es) of port(s) present on the device . |
| 1.3.6.1.4.1.2011.5.25.157.1.8.4.1.4 | ColumnhwSDHLpPerfCurrentDataIndex | not-accessible | current | Data index(es) of port(s) present on the device . |
| 1.3.6.1.4.1.2011.5.25.157.1.8.4.1.5 | ColumnhwSDHLpPerfCurrentBBE | read-only | current | Low order Path Background Block Error. |
| 1.3.6.1.4.1.2011.5.25.157.1.8.4.1.6 | ColumnhwSDHLpPerfCurrentES | read-only | current | Low order Path errored seconds. |
| 1.3.6.1.4.1.2011.5.25.157.1.8.4.1.7 | ColumnhwSDHLpPerfCurrentSES | read-only | current | Low order Path severely errored seconds. |
| 1.3.6.1.4.1.2011.5.25.157.1.8.4.1.8 | ColumnhwSDHLpPerfCurrentUAS | read-only | current | Low order Path Unavailable second. |
| 1.3.6.1.4.1.2011.5.25.157.1.8.4.1.9 | ColumnhwSDHLpPerfCurrentFEBBE | read-only | current | Low order Path Far-end Background Block Error. |
| 1.3.6.1.4.1.2011.5.25.157.1.8.4.1.10 | ColumnhwSDHLpPerfCurrentFEES | read-only | current | Low order Path Far-end errored seconds. |
| 1.3.6.1.4.1.2011.5.25.157.1.8.4.1.11 | ColumnhwSDHLpPerfCurrentFESES | read-only | current | Low order Path Far-end severely errored seconds. |
| 1.3.6.1.4.1.2011.5.25.157.1.8.4.1.12 | ColumnhwSDHLpPerfCurrentFEUAS | read-only | current | Low order Path Far-end Unavailable second. |
| 1.3.6.1.4.1.2011.5.25.157.1.8.5 | TablehwPDHPerfCurrentTable | not-accessible | current | Indicates the performance stat of the E1 line side. |
| 1.3.6.1.4.1.2011.5.25.157.1.8.5.1 | RowhwPDHPerfCurrentEntry | not-accessible | current | Indicates the performance stat of the E1 line side. |
| 1.3.6.1.4.1.2011.5.25.157.1.8.5.1.1 | ColumnhwPDHPerfCurrentIfIndex | not-accessible | current | Interface index(es) of port(s) present on the device. |
| 1.3.6.1.4.1.2011.5.25.157.1.8.5.1.2 | ColumnhwPDHPerfCurrentDataIndex | not-accessible | current | Data index(es) of port(s) present on the device. |
| 1.3.6.1.4.1.2011.5.25.157.1.8.5.1.3 | ColumnhwPDHPerfCurrentBBE | read-only | current | Low order Path Background Block Error. |
| 1.3.6.1.4.1.2011.5.25.157.1.8.5.1.4 | ColumnhwPDHPerfCurrentES | read-only | current | E1 line side code violation errored second. |
| 1.3.6.1.4.1.2011.5.25.157.1.8.5.1.5 | ColumnhwPDHPerfCurrentSES | read-only | current | E1 line side code violation severely errored second. |
| 1.3.6.1.4.1.2011.5.25.157.1.8.5.1.6 | ColumnhwPDHPerfCurrentUAS | read-only | current | E1 line side code violation loss-of-signal second. |
| 1.3.6.1.4.1.2011.5.25.157.1.8.5.1.7 | ColumnhwPDHPerfCurrentLCV | read-only | current | E1 line side code violation count. |
| 1.3.6.1.4.1.2011.5.25.157.1.8.6 | TablehwEthPortStatTable | not-accessible | current | Indicates the stat of the ethernet interface. |
| 1.3.6.1.4.1.2011.5.25.157.1.8.6.1 | RowhwEthPortStatEntry | not-accessible | current | Indicates the stat of the ethernet interface. |
| 1.3.6.1.4.1.2011.5.25.157.1.8.6.1.1 | ColumnhwEthPortStatIfIndex | not-accessible | current | Interface index(es) of port(s) present on the device. |
| 1.3.6.1.4.1.2011.5.25.157.1.8.6.1.2 | ColumnhwEthPortStatBadBytes | read-only | current | Indicates the stat of badbytes. |
| 1.3.6.1.4.1.2011.5.25.157.1.8.6.1.3 | ColumnhwEthPortStatOutPut64Bytes | read-only | current | The total number of packets (including bad packets) output that were 64 octets in length (excluding framing bits but including FCS octets). |
| 1.3.6.1.4.1.2011.5.25.157.1.8.6.1.4 | ColumnhwEthPortStatOutPut65to127Bytes | read-only | current | The total number of packets (including bad packets) output that were between 65 and 127 octets in length inclusive (excluding framing bits but including FCS oc… |
| 1.3.6.1.4.1.2011.5.25.157.1.8.6.1.5 | ColumnhwEthPortStatOutPut128to255Bytes | read-only | current | The total number of packets (including bad packets) output that were between 128 and 255 octets in length inclusive (excluding framing bits but including FCS o… |
| 1.3.6.1.4.1.2011.5.25.157.1.8.6.1.6 | ColumnhwEthPortStatOutPut256to511Bytes | read-only | current | The total number of packets (including bad packets) output that were between 256 and 511 octets in length inclusive (excluding framing bits but including FCS o… |
| 1.3.6.1.4.1.2011.5.25.157.1.8.6.1.7 | ColumnhwEthPortStatOutPut512to1023Bytes | read-only | current | The total number of packets (including bad packets) output that were between 512 and 1023 octets in length inclusive (excluding framing bits but including FCS … |
| 1.3.6.1.4.1.2011.5.25.157.1.8.6.1.8 | ColumnhwEthPortStatOutPut1024to1518Bytes | read-only | current | The total number of packets (including bad packets) output that were between 1024 and 1518 octets in length inclusive (excluding framing bits but including FCS… |
| 1.3.6.1.4.1.2011.5.25.157.1.8.6.1.9 | ColumnhwEthPortStatOutPut1519toMaxBytes | read-only | current | The total number of packets (including bad packets) output that were between 1519 and max length octets in length inclusive (excluding framing bits but includi… |
| 1.3.6.1.4.1.2011.5.25.157.1.8.7 | NodehwPhysicalPortGlobleCfg | |||
| 1.3.6.1.4.1.2011.5.25.157.1.8.7.1 | ScalarhwLoopBackAutoClearEnable | read-write | current | set loopback autoclear status enable(1) disable(2). |
| 1.3.6.1.4.1.2011.5.25.157.1.8.7.2 | ScalarhwLoopBackAutoClearPeriod | read-write | current | set loopback autoclear period, unit minute,value range<1-2880> default<5 minute>. |
| 1.3.6.1.4.1.2011.5.25.157.1.8.7.3 | ScalarhwPortAlarmInverseEnable | read-write | current | Config globle alarm inverse enable. |
| 1.3.6.1.4.1.2011.5.25.157.1.9 | NodehwDslGroup | |||
| 1.3.6.1.4.1.2011.5.25.157.1.9.1 | TablehwDslGroupTable | not-accessible | current | Indicates the attributes of the dsl group. |
| 1.3.6.1.4.1.2011.5.25.157.1.9.1.1 | RowhwDslGroupEntry | not-accessible | current | An entry in the dsl group table. |
| 1.3.6.1.4.1.2011.5.25.157.1.9.1.1.1 | ColumnhwDslGroupIfIndex | read-only | current | Interface index(es) of dsl group present on the device. |
| 1.3.6.1.4.1.2011.5.25.157.1.9.1.1.2 | ColumnhwDslGroupWorkMode | read-write | current | The dsl group of SHD4 card can work in efm or atm mode. Default is efm. |
| 1.3.6.1.4.1.2011.5.25.157.1.9.1.1.3 | ColumnhwDslGroupBisState | read-write | current | Bis can be enabled or disabled in ATM mode of SHD4 card. |
| 1.3.6.1.4.1.2011.5.25.157.1.9.1.1.4 | ColumnhwDslGroupEncapeMode | read-write | current | The dsl group of AVD8 card can work in ETHoA-LLC mode or ETHoA-VCMUX mode. Default is ETHoA-LLC. |
| 1.3.6.1.4.1.2011.5.25.157.1.9.1.1.5 | ColumnhwDslGroupEnable | read-write | current | Trigger the operation of binding dsl link(s) to the dsl group. |
| 1.3.6.1.4.1.2011.5.25.157.1.9.1.1.60 | ColumnhwDslGroupRowStatus | read-create | current | An object that allows entries in this table to be created, modified and deleted using the RowStatus convention. A SET operation to any other attribute in this … |
| 1.3.6.1.4.1.2011.5.25.157.1.9.2 | TablehwDslGroupBoundVeTable | not-accessible | current | Indicates the attributes of the dsl group bound virtual-ethernet. |
| 1.3.6.1.4.1.2011.5.25.157.1.9.2.1 | RowhwDslGroupBoundVeEntry | not-accessible | current | An entry in the dsl group bound vitrual-ethernet table. |
| 1.3.6.1.4.1.2011.5.25.157.1.9.2.1.1 | ColumnhwDslGroupIfIndexOfBound | read-only | current | Interface index(es) of dsl group present on the device. |
| 1.3.6.1.4.1.2011.5.25.157.1.9.2.1.2 | ColumnhwVirtualEthernetIfIndex | read-only | current | The first virtual ethernet interface which the dsl group is bound to. |
| 1.3.6.1.4.1.2011.5.25.157.1.9.2.1.3 | ColumnhwDslGroupVpi | read-write | current | VPI value of the 1st PVC pair. |
| 1.3.6.1.4.1.2011.5.25.157.1.9.2.1.4 | ColumnhwDslGroupVci | read-write | current | VCI value of the 1st PVC pair. |
| 1.3.6.1.4.1.2011.5.25.157.1.9.2.1.5 | ColumnhwDslGroupPvcId | read-only | current | Identifier for VPI/VCI Pair. |
| 1.3.6.1.4.1.2011.5.25.157.1.9.2.1.50 | ColumnhwBoundVeRowStatus | read-create | obsolete | An object that allows entries in this table to be created, modified and deleted using the RowStatus convention. A SET operation to any other attribute in this … |
| 1.3.6.1.4.1.2011.5.25.157.1.9.3 | TablehwDslGroupBindVeTable | not-accessible | current | Indicates the relation of the dsl group binding virtual-ethernet. |
| 1.3.6.1.4.1.2011.5.25.157.1.9.3.1 | RowhwDslGroupBindVeEntry | not-accessible | current | An entry in the dsl group binding vitrual-ethernet table. |
| 1.3.6.1.4.1.2011.5.25.157.1.9.3.1.1 | ColumnhwDslGroupInterfaceIndex | read-only | current | Interface index(es) of the dsl group present on the device. |
| 1.3.6.1.4.1.2011.5.25.157.1.9.3.1.2 | ColumnhwVirtualEthernetInterfaceIndex | read-only | current | The virtual ethernet interface index which the dsl group is bound to. |
| 1.3.6.1.4.1.2011.5.25.157.1.9.3.1.50 | ColumnhwBindVeRowStatus | read-create | current | An object that allows entries in this table to be created, modified and deleted using the RowStatus convention. A SET operation to any other attribute in this … |
| 1.3.6.1.4.1.2011.5.25.157.1.10 | NodehwDslGroupIma | |||
| 1.3.6.1.4.1.2011.5.25.157.1.10.1 | TablehwDslGroupImaTable | not-accessible | current | Indicates the attributes of the dsl ima group. |
| 1.3.6.1.4.1.2011.5.25.157.1.10.1.1 | RowhwDslGroupImaEntry | not-accessible | current | An entry of the dsl ima group table. |
| 1.3.6.1.4.1.2011.5.25.157.1.10.1.1.1 | ColumnhwDslGroupImaIfIndex | read-only | current | Interface index(es) of dsl group present on the device. |
| 1.3.6.1.4.1.2011.5.25.157.1.10.1.1.2 | ColumnhwDslGroupImaVersion | read-write | current | Version of the ima group of SHD4I card. v0: ima protocol version 1.0; v1: ima protocol version 1.1. |
| 1.3.6.1.4.1.2011.5.25.157.1.10.1.1.3 | ColumnhwDslGroupImaFrameLen | read-write | current | Frame length of the ima group of SHD4I card. If ima protocol version is 1.0, the frame length is only 128. |
| 1.3.6.1.4.1.2011.5.25.157.1.10.1.1.4 | ColumnhwDslGroupImaReset | read-write | current | ima group reset for SHD4I card. |
| 1.3.6.1.4.1.2011.5.25.157.1.10.1.1.5 | ColumnhwDslGroupImaTxMinLinkNum | read-write | current | Minimum active links number by TX direction. |
| 1.3.6.1.4.1.2011.5.25.157.1.10.1.1.6 | ColumnhwDslGroupImaRxMinLinkNum | read-write | current | Minimum active links number by RX direction. |
| 1.3.6.1.4.1.2011.5.25.157.1.10.1.1.7 | ColumnhwDslGroupImaNeState | read-only | current | The current state of the near-end ima group. |
| 1.3.6.1.4.1.2011.5.25.157.1.10.1.1.8 | ColumnhwDslGroupImaFeState | read-only | current | The current state of the far-end ima group. |
| 1.3.6.1.4.1.2011.5.25.157.1.10.1.1.9 | ColumnhwDslGroupImaTxCellRate | read-only | current | The current cell rate of ima group by TX direction. |
| 1.3.6.1.4.1.2011.5.25.157.1.10.1.1.10 | ColumnhwDslGroupImaRxCellRate | read-only | current | The current cell rate of ima group by RX direction. |
| 1.3.6.1.4.1.2011.5.25.157.1.10.1.1.11 | ColumnhwDslGroupImaTxActLinkNum | read-only | current | Number of active links by TX direction. |
| 1.3.6.1.4.1.2011.5.25.157.1.10.1.1.12 | ColumnhwDslGroupImaRxActLinkNum | read-only | current | Number of active links by RX direction. |
| 1.3.6.1.4.1.2011.5.25.157.1.10.1.1.13 | ColumnhwDslGroupImaIfName | read-only | current | The interface name of ima group. |
| 1.3.6.1.4.1.2011.5.25.157.1.11 | NodehwDslLink | |||
| 1.3.6.1.4.1.2011.5.25.157.1.11.1 | TablehwDslLinkTable | not-accessible | current | Indicates the dsl link bound relation. |
| 1.3.6.1.4.1.2011.5.25.157.1.11.1.1 | RowhwDslLinkEntry | not-accessible | current | An entry of the dsl link bound relation. |
| 1.3.6.1.4.1.2011.5.25.157.1.11.1.1.1 | ColumnhwBoundDslGroupIfIndex | read-only | current | Interface index of dsl group which the dsl link bound to. |
| 1.3.6.1.4.1.2011.5.25.157.1.11.1.1.2 | ColumnhwDslLinkIfIndex | read-write | current | Interface index of the dsl link device. |
| 1.3.6.1.4.1.2011.5.25.157.1.11.1.1.4 | ColumnhwDslLinkIfName | read-only | current | The interface name of the dsl link. |
| 1.3.6.1.4.1.2011.5.25.157.1.11.1.1.5 | ColumnhwBoundDslGroupIfName | read-only | current | Interface index of dsl group which the dsl link bound to. |
| 1.3.6.1.4.1.2011.5.25.157.1.11.1.1.50 | ColumnhwDslLinkBoundRowStatus | read-create | current | An object that allows entries in this table to be created, modified and deleted using the RowStatus convention. A SET operation to any other attribute in this … |
| 1.3.6.1.4.1.2011.5.25.157.1.12 | NodehwPWAlarm | |||
| 1.3.6.1.4.1.2011.5.25.157.1.12.1 | TablehwPWAlarmTable | not-accessible | current | Indicates the attributes of the PW alarm. |
| 1.3.6.1.4.1.2011.5.25.157.1.12.1.1 | RowhwPWAlarmEntry | not-accessible | current | An entry of the PW alarm relation. |
| 1.3.6.1.4.1.2011.5.25.157.1.12.1.1.1 | ColumnhwPWAlarmIfIndex | not-accessible | current | Interface index of PW alarm group. |
| 1.3.6.1.4.1.2011.5.25.157.1.12.1.1.2 | ColumnhwPWCesVcID | read-only | current | Vc ID of PW alarm group. |
| 1.3.6.1.4.1.2011.5.25.157.1.12.1.1.3 | ColumnhwPWCesVcType | read-only | current | Vc Type of PW alarm group. |
| 1.3.6.1.4.1.2011.5.25.157.1.12.1.1.4 | ColumnhwPeerIpAddr | read-only | current | Peer IP Address of PW alarm group. |
| 1.3.6.1.4.1.2011.5.25.157.1.12.1.1.5 | ColumnhwAlarmStatus | read-only | obsolete | Alarm status of PW alarm group. |
| 1.3.6.1.4.1.2011.5.25.157.1.12.1.1.6 | ColumnhwPWAlarmRMLEnableStatus | read-write | current | PW control word RML of PW alarm group. |
| 1.3.6.1.4.1.2011.5.25.157.1.12.1.1.7 | ColumnhwLosAlarmTriggerThreshold | read-write | current | Trigger Threshold of continuous loss packets of PW alarm group. |
| 1.3.6.1.4.1.2011.5.25.157.1.12.1.1.8 | ColumnhwLosAlarmResumeThreshold | read-write | current | Resume Threshold of continuous loss packets of PW alarm group. |
| 1.3.6.1.4.1.2011.5.25.157.1.12.1.1.9 | ColumnhwPWPortName | read-only | current | PW port name of PW alarm group. |
| 1.3.6.1.4.1.2011.5.25.157.1.12.1.1.10 | ColumnhwLosPktExcTriggerThreshold | read-write | current | Trigger threshold of lost packets of PW alarm group. |
| 1.3.6.1.4.1.2011.5.25.157.1.12.1.1.11 | ColumnhwLosPktExcResumeThreshold | read-write | current | Resume threshold of lost packets of PW alarm group. |
| 1.3.6.1.4.1.2011.5.25.157.1.12.1.1.12 | ColumnhwMisorderPktExcTriggerThreshold | read-write | current | Trigger threshold of packets lost due to the out-of-order condition of PW alarm group. |
| 1.3.6.1.4.1.2011.5.25.157.1.12.1.1.13 | ColumnhwMisorderPktExcResumeThreshold | read-write | current | Resume threshold of packets lost due to the out-of-order condition of PW alarm group. |
| 1.3.6.1.4.1.2011.5.25.157.1.12.1.1.14 | ColumnhwStrayPktExcTriggerThreshold | read-write | current | Trigger threshold of misconnected packets of PW alarm group. |
| 1.3.6.1.4.1.2011.5.25.157.1.12.1.1.15 | ColumnhwStrayPktExcResumeThreshold | read-write | current | Resume threshold of misconnected packets of PW alarm group. |
| 1.3.6.1.4.1.2011.5.25.157.1.12.1.1.16 | ColumnhwMalPktExcTriggerThreshold | read-write | current | Trigger threshold of malformed packets of PW alarm group. |
| 1.3.6.1.4.1.2011.5.25.157.1.12.1.1.17 | ColumnhwMalPktExcResumeThreshold | read-write | current | Resume threshold of malformed packets of PW alarm group. |
| 1.3.6.1.4.1.2011.5.25.157.1.12.1.1.18 | ColumnhwJtrUdrExcTriggerThreshold | read-write | current | Trigger threshold of jitter buffer underflows of PW alarm group. |
| 1.3.6.1.4.1.2011.5.25.157.1.12.1.1.19 | ColumnhwJtrUdrExcResumeThreshold | read-write | current | Resume threshold of jitter buffer underflows of PW alarm group. |
| 1.3.6.1.4.1.2011.5.25.157.1.12.1.1.20 | ColumnhwJtrOvrExcTriggerThreshold | read-write | current | Trigger threshold of jitter buffer overflows of PW alarm group. |
| 1.3.6.1.4.1.2011.5.25.157.1.12.1.1.21 | ColumnhwJtrOvrExcResumeThreshold | read-write | current | Resume threshold of jitter buffer overflows of PW alarm group. |
| 1.3.6.1.4.1.2011.5.25.157.1.12.2 | TablehwAtmPWAlarmTable | not-accessible | current | Indicates the attributes of the ATM PW alarm. |
| 1.3.6.1.4.1.2011.5.25.157.1.12.2.1 | RowhwAtmPWAlarmEntry | not-accessible | current | An entry of the ATM PW alarm relation. |
| 1.3.6.1.4.1.2011.5.25.157.1.12.2.1.1 | ColumnhwAtmPWAlarmIfIndex | read-only | current | Interface index of ATM PW alarm group. |
| 1.3.6.1.4.1.2011.5.25.157.1.12.2.1.2 | ColumnhwAtmVcID | read-only | current | Vc ID of ATM PW alarm group. |
| 1.3.6.1.4.1.2011.5.25.157.1.12.2.1.3 | ColumnhwAtmVcType | read-only | current | Vc Type of ATM PW alarm group. |
| 1.3.6.1.4.1.2011.5.25.157.1.12.2.1.4 | ColumnhwAtmPeerIpAddr | read-only | current | Peer IP Address of ATM PW alarm group. |
| 1.3.6.1.4.1.2011.5.25.157.1.12.2.1.5 | ColumnhwAtmPWPortName | read-only | current | ATM PW port name of PW alarm group. |
| 1.3.6.1.4.1.2011.5.25.157.1.12.2.1.6 | ColumnhwAtmLosPktExcTriggerThreshold | read-write | current | Trigger threshold of lost packets of ATM PW alarm group. |
| 1.3.6.1.4.1.2011.5.25.157.1.12.2.1.7 | ColumnhwAtmLosPktExcResumeThreshold | read-write | current | Resume threshold of lost packets of ATM PW alarm group. |
| 1.3.6.1.4.1.2011.5.25.157.1.12.2.1.8 | ColumnhwAtmMisorderPktExcTriggerThreshold | read-write | current | Trigger threshold of packets lost due to the out-of-order condition of ATM PW alarm group. |
| 1.3.6.1.4.1.2011.5.25.157.1.12.2.1.9 | ColumnhwAtmMisorderPktExcResumeThreshold | read-write | current | Resume threshold of packets lost due to the out-of-order condition of ATM PW alarm group. |
| 1.3.6.1.4.1.2011.5.25.157.1.12.2.1.10 | ColumnhwAtmUnknownCellExcTriggerThreshold | read-write | current | Trigger threshold of unknown cell of ATM PW alarm group. |
| 1.3.6.1.4.1.2011.5.25.157.1.12.2.1.11 | ColumnhwAtmUnknownCellExcResumeThreshold | read-write | current | Resume threshold of unknown cell of ATM PW alarm group. |
| 1.3.6.1.4.1.2011.5.25.157.1.13 | NodehwSNMPTrapEn | |||
| 1.3.6.1.4.1.2011.5.25.157.1.13.1 | TablehwSNMPTrapEnTable | not-accessible | current | Reserved nodes do not support this function temporarily. |
| 1.3.6.1.4.1.2011.5.25.157.1.13.1.1 | RowhwSNMPTrapEnEntry | not-accessible | current | Reserved nodes do not support this function temporarily. |
| 1.3.6.1.4.1.2011.5.25.157.1.13.1.1.1 | ColumnhwSNMPTrapEnIfIndex | not-accessible | current | Reserved nodes do not support this function temporarily. |
| 1.3.6.1.4.1.2011.5.25.157.1.13.1.1.2 | ColumnhwCesPWLopsEn | read-write | current | Reserved nodes do not support this function temporarily. |
| 1.3.6.1.4.1.2011.5.25.157.1.13.1.1.3 | ColumnhwCesPWRemoteLosPktEn | read-write | current | Reserved nodes do not support this function temporarily. |
| 1.3.6.1.4.1.2011.5.25.157.1.13.1.1.4 | ColumnhwCesPWOppositeRAIEn | read-write | current | Reserved nodes do not support this function temporarily. |
| 1.3.6.1.4.1.2011.5.25.157.1.13.1.1.5 | ColumnhwCesPWOppositeAcfaultEn | read-write | current | Reserved nodes do not support this function temporarily. |
| 1.3.6.1.4.1.2011.5.25.157.1.13.1.1.6 | ColumnhwCesPWLosPktEn | read-write | current | Reserved nodes do not support this function temporarily. |
| 1.3.6.1.4.1.2011.5.25.157.1.13.1.1.7 | ColumnhwCesPWMisorderPktEn | read-write | current | Reserved nodes do not support this function temporarily. |
| 1.3.6.1.4.1.2011.5.25.157.1.13.1.1.8 | ColumnhwCesPWStrayPktEn | read-write | current | Reserved nodes do not support this function temporarily. |
| 1.3.6.1.4.1.2011.5.25.157.1.13.1.1.9 | ColumnhwCesPWMalPktEn | read-write | current | Reserved nodes do not support this function temporarily. |
| 1.3.6.1.4.1.2011.5.25.157.1.13.1.1.10 | ColumnhwCesPWJtrUnrEn | read-write | current | Reserved nodes do not support this function temporarily. |
| 1.3.6.1.4.1.2011.5.25.157.1.13.1.1.11 | ColumnhwCesPWJtrOvrEn | read-write | current | Reserved nodes do not support this function temporarily. |
| 1.3.6.1.4.1.2011.5.25.157.1.13.1.1.12 | ColumnhwCesPWAllEn | read-write | current | Reserved nodes do not support this function temporarily. |
| 1.3.6.1.4.1.2011.5.25.157.1.13.1.1.13 | ColumnhwPhysicalPortLosAlarmEn | read-write | current | Reserved nodes do not support this function temporarily. |
| 1.3.6.1.4.1.2011.5.25.157.1.13.1.1.14 | ColumnhwPhysicalPortLofAlarmEn | read-write | current | Reserved nodes do not support this function temporarily. |
| 1.3.6.1.4.1.2011.5.25.157.1.13.1.1.15 | ColumnhwRsOofAlarmEn | read-write | current | Reserved nodes do not support this function temporarily. |
| 1.3.6.1.4.1.2011.5.25.157.1.13.1.1.16 | ColumnhwRsB1ExcAlarmEn | read-write | current | Reserved nodes do not support this function temporarily. |
| 1.3.6.1.4.1.2011.5.25.157.1.13.1.1.17 | ColumnhwRsB1SdAlarmEn | read-write | current | Reserved nodes do not support this function temporarily. |
| 1.3.6.1.4.1.2011.5.25.157.1.13.1.1.18 | ColumnhwRsJ0TimAlarmEn | read-write | current | Reserved nodes do not support this function temporarily. |
| 1.3.6.1.4.1.2011.5.25.157.1.13.1.1.19 | ColumnhwMsRdiAlarmEn | read-write | current | Reserved nodes do not support this function temporarily. |
| 1.3.6.1.4.1.2011.5.25.157.1.13.1.1.20 | ColumnhwMsB2ExcAlarmEn | read-write | current | Reserved nodes do not support this function temporarily. |
| 1.3.6.1.4.1.2011.5.25.157.1.13.1.1.21 | ColumnhwMsAuLopAlarmEn | read-write | current | Reserved nodes do not support this function temporarily. |
| 1.3.6.1.4.1.2011.5.25.157.1.13.1.1.22 | ColumnhwMsAisAlarmEn | read-write | current | Reserved nodes do not support this function temporarily. |
| 1.3.6.1.4.1.2011.5.25.157.1.13.1.1.23 | ColumnhwMsB2SdAlarmEn | read-write | current | Reserved nodes do not support this function temporarily. |
| 1.3.6.1.4.1.2011.5.25.157.1.13.1.1.24 | ColumnhwHpJ1TimAlarmEn | read-write | current | Reserved nodes do not support this function temporarily. |
| 1.3.6.1.4.1.2011.5.25.157.1.13.1.1.25 | ColumnhwHpUneqAlarmEn | read-write | current | Reserved nodes do not support this function temporarily. |
| 1.3.6.1.4.1.2011.5.25.157.1.13.1.1.26 | ColumnhwHpRdiAlarmEn | read-write | current | Reserved nodes do not support this function temporarily. |
| 1.3.6.1.4.1.2011.5.25.157.1.13.1.1.27 | ColumnhwHpB3ExcAlarmEn | read-write | current | Reserved nodes do not support this function temporarily. |
| 1.3.6.1.4.1.2011.5.25.157.1.13.1.1.28 | ColumnhwHpPlmAlarmEn | read-write | current | Reserved nodes do not support this function temporarily. |
| 1.3.6.1.4.1.2011.5.25.157.1.13.1.1.29 | ColumnhwHpB3SdAlarmEn | read-write | current | Reserved nodes do not support this function temporarily. |
| 1.3.6.1.4.1.2011.5.25.157.1.13.1.1.30 | ColumnhwHpAuAisAlarmEn | read-write | current | Reserved nodes do not support this function temporarily. |
| 1.3.6.1.4.1.2011.5.25.157.1.13.1.1.31 | ColumnhwLpTuLopAlarmEn | read-write | current | Reserved nodes do not support this function temporarily. |
| 1.3.6.1.4.1.2011.5.25.157.1.13.1.1.32 | ColumnhwHpTuLomAlarmEn | read-write | current | Reserved nodes do not support this function temporarily. |
| 1.3.6.1.4.1.2011.5.25.157.1.13.1.1.33 | ColumnhwLpTimAlarmEn | read-write | current | Reserved nodes do not support this function temporarily. |
| 1.3.6.1.4.1.2011.5.25.157.1.13.1.1.34 | ColumnhwLpUneqAlarmEn | read-write | current | Reserved nodes do not support this function temporarily. |
| 1.3.6.1.4.1.2011.5.25.157.1.13.1.1.35 | ColumnhwLpRdiAlarmEn | read-write | current | Reserved nodes do not support this function temporarily. |
| 1.3.6.1.4.1.2011.5.25.157.1.13.1.1.36 | ColumnhwLpBipExcAlarmEn | read-write | current | Reserved nodes do not support this function temporarily. |
| 1.3.6.1.4.1.2011.5.25.157.1.13.1.1.37 | ColumnhwLpBipSdAlarmEn | read-write | current | Reserved nodes do not support this function temporarily. |
| 1.3.6.1.4.1.2011.5.25.157.1.13.1.1.38 | ColumnhwLpPlmAlarmEn | read-write | current | Reserved nodes do not support this function temporarily. |
| 1.3.6.1.4.1.2011.5.25.157.1.13.1.1.39 | ColumnhwLpTuAisAlarmEn | read-write | current | Reserved nodes do not support this function temporarily. |
| 1.3.6.1.4.1.2011.5.25.157.1.13.1.1.40 | ColumnhwDs1EsExcAlarmEn | read-write | current | Reserved nodes do not support this function temporarily. |
| 1.3.6.1.4.1.2011.5.25.157.1.13.1.1.41 | ColumnhwDs1RmfaAlarmEn | read-write | current | Reserved nodes do not support this function temporarily. |
| 1.3.6.1.4.1.2011.5.25.157.1.13.1.1.42 | ColumnhwDs1LmfaAlarmEn | read-write | current | Reserved nodes do not support this function temporarily. |
| 1.3.6.1.4.1.2011.5.25.157.1.13.1.1.43 | ColumnhwDs1AisAlarmEn | read-write | current | Reserved nodes do not support this function temporarily. |
| 1.3.6.1.4.1.2011.5.25.157.1.13.1.1.44 | ColumnhwDs1RdiAlarmEn | read-write | current | Reserved nodes do not support this function temporarily. |
| 1.3.6.1.4.1.2011.5.25.157.1.13.1.1.45 | ColumnhwRsLocAlarmEn | read-write | current | Reserved nodes do not support this function temporarily. |
| 1.3.6.1.4.1.2011.5.25.157.1.13.1.1.46 | ColumnhwLpRfiAlarmEn | read-write | current | Reserved nodes do not support this function temporarily. |
| 1.3.6.1.4.1.2011.5.25.157.1.13.1.1.47 | ColumnhwLpV5VcaisAlarmEn | read-write | current | Reserved nodes do not support this function temporarily. |
| 1.3.6.1.4.1.2011.5.25.157.1.13.1.1.48 | ColumnhwVc12oofAlarmEn | read-write | current | Reserved nodes do not support this function temporarily. |
| 1.3.6.1.4.1.2011.5.25.157.1.13.1.1.49 | ColumnhwVc12AlmE1RaiAlarmEn | read-write | current | Reserved nodes do not support this function temporarily. |
| 1.3.6.1.4.1.2011.5.25.157.1.13.1.1.50 | ColumnhwVc12LfaAlarmEn | read-write | current | Reserved nodes do not support this function temporarily. |
| 1.3.6.1.4.1.2011.5.25.157.1.13.1.1.51 | ColumnhwVc12UpE1AisAlarmEn | read-write | current | Reserved nodes do not support this function temporarily. |
| 1.3.6.1.4.1.2011.5.25.157.1.13.1.1.52 | ColumnhwVc12DownE1AisAlarmEn | read-write | current | Reserved nodes do not support this function temporarily. |
| 1.3.6.1.4.1.2011.5.25.157.1.13.1.1.53 | ColumnhwDs1DownE1AisAlarmEn | read-write | current | Reserved nodes do not support this function temporarily. |
| 1.3.6.1.4.1.2011.5.25.157.1.13.1.1.54 | ColumnhwMsLpsUniBiMAlarmEn | read-write | current | Reserved nodes do not support this function temporarily. |
| 1.3.6.1.4.1.2011.5.25.157.1.13.1.1.55 | ColumnhwMsK1K2MAlarmEn | read-write | current | Reserved nodes do not support this function temporarily. |
| 1.3.6.1.4.1.2011.5.25.157.1.13.1.1.56 | ColumnhwMsK2MAlarmEn | read-write | current | Reserved nodes do not support this function temporarily. |
| 1.3.6.1.4.1.2011.5.25.157.1.13.1.1.57 | ColumnhwVc12LmfaAlarmEn | read-write | current | Reserved nodes do not support this function temporarily. |
| 1.3.6.1.4.1.2011.5.25.157.1.13.1.1.58 | ColumnhwSDHAllEn | read-write | current | Reserved nodes do not support this function temporarily. |
| 1.3.6.1.4.1.2011.5.25.157.1.13.1.1.59 | ColumnhwLaserShutAlarmEn | read-write | current | Reserved nodes do not support this function temporarily. |
| 1.3.6.1.4.1.2011.5.25.157.1.13.1.1.60 | ColumnhwLaserAutoShutAlarmEn | read-write | current | Reserved nodes do not support this function temporarily. |
| 1.3.6.1.4.1.2011.5.25.157.1.13.1.1.61 | ColumnhwLaserAllEn | read-write | current | Reserved nodes do not support this function temporarily. |
| 1.3.6.1.4.1.2011.5.25.157.1.13.1.1.62 | ColumnhwLoopbackAlarmEn | read-write | current | Reserved nodes do not support this function temporarily. |
| 1.3.6.1.4.1.2011.5.25.157.1.13.1.1.63 | ColumnhwChannelLoopbackAlarmEn | read-write | current | Reserved nodes do not support this function temporarily. |
| 1.3.6.1.4.1.2011.5.25.157.1.13.1.1.64 | ColumnhwLoopbackAllEn | read-write | current | Reserved nodes do not support this function temporarily. |
| 1.3.6.1.4.1.2011.5.25.157.1.13.1.1.65 | ColumnhwAtmOcdAlarmEn | read-write | current | Reserved nodes do not support this function temporarily. |
| 1.3.6.1.4.1.2011.5.25.157.1.13.1.1.66 | ColumnhwAtmLcdAlarmEn | read-write | current | Reserved nodes do not support this function temporarily. |
| 1.3.6.1.4.1.2011.5.25.157.1.13.1.1.67 | ColumnhwAtmUhcsAlarmEn | read-write | current | Reserved nodes do not support this function temporarily. |
| 1.3.6.1.4.1.2011.5.25.157.1.13.1.1.68 | ColumnhwAtmChcsAlarmEn | read-write | current | Reserved nodes do not support this function temporarily. |
| 1.3.6.1.4.1.2011.5.25.157.1.13.1.1.69 | ColumnhwAtmPWLosPktEn | read-write | current | Reserved nodes do not support this function temporarily. |
| 1.3.6.1.4.1.2011.5.25.157.1.13.1.1.70 | ColumnhwAtmPWMisorderPktEn | read-write | current | Reserved nodes do not support this function temporarily. |
| 1.3.6.1.4.1.2011.5.25.157.1.13.1.1.71 | ColumnhwAtmPWUnknownCellEn | read-write | current | Reserved nodes do not support this function temporarily. |
| 1.3.6.1.4.1.2011.5.25.157.1.13.1.1.72 | ColumnhwAtmAllEn | read-write | current | Reserved nodes do not support this function temporarily. |
| 1.3.6.1.4.1.2011.5.25.157.1.14 | NodehwPortAlarmThreshold | |||
| 1.3.6.1.4.1.2011.5.25.157.1.14.1 | TablehwPortAlarmThresholdTable | not-accessible | current | Indicates the port alarm threshold. This table lists the port alarm threshold of various interfaces. |
| 1.3.6.1.4.1.2011.5.25.157.1.14.1.1 | RowhwPortAlarmThresholdEntry | not-accessible | current | Indicates the port alarm threshold. This table lists the threshold of various port alarm. |
| 1.3.6.1.4.1.2011.5.25.157.1.14.1.1.1 | ColumnhwPhysicalPortThrIfIndex | accessible-for-notify | current | Interface index(es) of physical port(s) present on the device. |
| 1.3.6.1.4.1.2011.5.25.157.1.14.1.1.2 | ColumnhwPhysicalPortThrName | read-only | current | Interface name of physical port(s) present on the device. |
| 1.3.6.1.4.1.2011.5.25.157.1.14.1.1.3 | ColumnhwPhysicalPortCrcErrorStatistics | read-only | current | Crc error statistics value. |
| 1.3.6.1.4.1.2011.5.25.157.1.14.1.1.4 | ColumnhwPhysicalPortCrcErrorHighThreshold | read-write | current | Crc error alarm high threshold,default value is 1000. |
| 1.3.6.1.4.1.2011.5.25.157.1.14.1.1.5 | ColumnhwPhysicalPortCrcErrorLowThreshold | read-write | current | Crc error alarm low threshold,default value is 100. |
| 1.3.6.1.4.1.2011.5.25.157.1.14.1.1.6 | ColumnhwPhysicalPortCrcErrorInterval | read-write | current | Crc error alarm interval time(unit is second),default value is 10s. |
| 1.3.6.1.4.1.2011.5.25.157.1.14.1.1.7 | ColumnhwPhysicalPortSymbolErrorStatistics | read-only | current | Symbol error statistics value. |
| 1.3.6.1.4.1.2011.5.25.157.1.14.1.1.8 | ColumnhwPhysicalPortSymbolErrorHighThreshold | read-write | current | Symbol error alarm high threshold,default value is 1000. |
| 1.3.6.1.4.1.2011.5.25.157.1.14.1.1.9 | ColumnhwPhysicalPortSymbolErrorLowThreshold | read-write | current | Symbol error alarm low threshold,default value is 100. |
| 1.3.6.1.4.1.2011.5.25.157.1.14.1.1.10 | ColumnhwPhysicalPortSymbolErrorInterval | read-write | current | Symbol error alarm interval time(unit is second),default value is 10s. |
| 1.3.6.1.4.1.2011.5.25.157.1.14.1.1.11 | ColumnhwPhysicalPortInputErrorStatistics | read-only | current | Input error statistics value. |
| 1.3.6.1.4.1.2011.5.25.157.1.14.1.1.12 | ColumnhwPhysicalPortInputErrorHighThreshold | read-write | current | Input error alarm high threshold,default value is 1000. |
| 1.3.6.1.4.1.2011.5.25.157.1.14.1.1.13 | ColumnhwPhysicalPortInputErrorLowThreshold | read-write | current | Input error alarm low threshold,default value is 100. |
| 1.3.6.1.4.1.2011.5.25.157.1.14.1.1.14 | ColumnhwPhysicalPortInputErrorInterval | read-write | current | Input error alarm interval time(unit is second),default value is 10s. |
| 1.3.6.1.4.1.2011.5.25.157.1.14.1.1.15 | ColumnhwPhysicalPortOutputErrorStatistics | read-only | current | Output error statistics value. |
| 1.3.6.1.4.1.2011.5.25.157.1.14.1.1.16 | ColumnhwPhysicalPortOutputErrorHighThreshold | read-write | current | Output error alarm high threshold,default value is 1000. |
| 1.3.6.1.4.1.2011.5.25.157.1.14.1.1.17 | ColumnhwPhysicalPortOutputErrorLowThreshold | read-write | current | Output error alarm low threshold,default value is 100. |
| 1.3.6.1.4.1.2011.5.25.157.1.14.1.1.18 | ColumnhwPhysicalPortOutputErrorInterval | read-write | current | Output error alarm interval time(unit is second),default value is 10s. |
| 1.3.6.1.4.1.2011.5.25.157.1.14.1.1.19 | ColumnhwPhysicalPortSdhErrorStatistics | read-only | current | Sdh error statistics value. |
| 1.3.6.1.4.1.2011.5.25.157.1.14.1.1.20 | ColumnhwPhysicalPortSdhErrorHighThreshold | read-write | current | Sdh error alarm high threshold,default value is 1000. |
| 1.3.6.1.4.1.2011.5.25.157.1.14.1.1.21 | ColumnhwPhysicalPortSdhErrorLowThreshold | read-write | current | Sdh error alarm low threshold,default value is 100. |
| 1.3.6.1.4.1.2011.5.25.157.1.14.1.1.22 | ColumnhwPhysicalPortSdhErrorInterval | read-write | current | Sdh error alarm interval time(unit is second),default value is 10s. |
| 1.3.6.1.4.1.2011.5.25.157.1.14.1.1.23 | ColumnhwPhysicalPortBIP8SDErrorThreshold | read-write | current | BIP8-SD error alarm threshold,default value is 6. |
| 1.3.6.1.4.1.2011.5.25.157.1.14.1.1.24 | ColumnhwPhysicalPortCrcPerAlarmThresholdCoefficient | read-write | current | The coefficient value of CRC-PER(Packet Error Ratio) alarm threshold. The range is 1 to 9. |
| 1.3.6.1.4.1.2011.5.25.157.1.14.1.1.25 | ColumnhwPhysicalPortCrcPerAlarmThresholdPower | read-write | current | The power value of CRC-PER(Packet Error Ratio) alarm threshold. The range is 1 to 7. |
| 1.3.6.1.4.1.2011.5.25.157.1.14.1.1.26 | ColumnhwPhysicalPortCrcPerResumeThresholdCoefficient | read-write | current | The coefficient value of CRC-PER(Packet Error Ratio) resume threshold. The range is 1 to 9. |
| 1.3.6.1.4.1.2011.5.25.157.1.14.1.1.27 | ColumnhwPhysicalPortCrcPerResumeThresholdPower | read-write | current | The power value of CRC-PER(Packet Error Ratio) resume threshold. The range is 1 to 7. |
| 1.3.6.1.4.1.2011.5.25.157.1.14.1.1.28 | ColumnhwPhysicalPortCrcPerTriggerLsp | read-write | current | Enable or disable the CRC-PER(Packet Error Ratio) result in switchover. The range is 0 to 2. The value 0 means switchover is disabled; 1 means only the lsp swi… |
| 1.3.6.1.4.1.2011.5.25.157.1.14.1.1.29 | ColumnhwPhysicalPortCrcPerCurrentValueString | accessible-for-notify | current | The current value of CRC-PER(Packet Error Ratio). |
| 1.3.6.1.4.1.2011.5.25.157.1.14.1.1.30 | ColumnhwPhysicalPortCrcPerAlarmThresholdString | accessible-for-notify | current | The alarm threshold of CRC-PER(Packet Error Ratio). |
| 1.3.6.1.4.1.2011.5.25.157.1.14.1.1.31 | ColumnhwPhysicalPortCrcPerResumeThresholdString | accessible-for-notify | current | The resume threshold of CRC-PER(Packet Error Ratio). |
| 1.3.6.1.4.1.2011.5.25.157.1.14.1.1.32 | ColumnhwPhysicalPortCrcPerTriggerSection | read-write | current | The trigger section of CRC-PER(Packet Error Ratio). |
| 1.3.6.1.4.1.2011.5.25.157.1.14.1.1.33 | ColumnhwPhysicalPortAlarmTypeThresholdCoefficient | read-write | current | The value 0 means high-low packet error is enabled; 1 means CRC-PER(Packet Error Ratio) is enabled; 2 means CRC-BER(Bit Error Ratio) is enabled. |
| 1.3.6.1.4.1.2011.5.25.157.1.14.1.1.34 | ColumnhwPhysicalPortCrcSdAlarmThresholdCoefficient | read-write | current | The coefficient value of MAC_FCS_SD alarm threshold. The range is 1 to 9. |
| 1.3.6.1.4.1.2011.5.25.157.1.14.1.1.35 | ColumnhwPhysicalPortCrcSdAlarmThresholdPower | read-write | current | The power value of MAC_FCS_SD alarm threshold. The range is 5 to 9. |
| 1.3.6.1.4.1.2011.5.25.157.1.14.1.1.36 | ColumnhwPhysicalPortCrcSdResumeThresholdCoefficient | read-write | current | The coefficient value of MAC_FCS_SD resume threshold. The range is 1 to 9. |
| 1.3.6.1.4.1.2011.5.25.157.1.14.1.1.37 | ColumnhwPhysicalPortCrcSdResumeThresholdPower | read-write | current | The power value of MAC_FCS_SD resume threshold. The range is 5 to 9. |
| 1.3.6.1.4.1.2011.5.25.157.1.14.1.1.38 | ColumnhwPhysicalPortCrcExcAlarmThresholdCoefficient | read-write | current | The coefficient value of MAC_FCS_EXC alarm threshold. The range is 1 to 9. |
| 1.3.6.1.4.1.2011.5.25.157.1.14.1.1.39 | ColumnhwPhysicalPortCrcExcAlarmThresholdPower | read-write | current | The power value of MAC_FCS_EXC alarm threshold. The range is 2 to 5. |
| 1.3.6.1.4.1.2011.5.25.157.1.14.1.1.40 | ColumnhwPhysicalPortCrcExcResumeThresholdCoefficient | read-write | current | The coefficient value of MAC_FCS_EXC resume threshold. The range is 1 to 9. |
| 1.3.6.1.4.1.2011.5.25.157.1.14.1.1.41 | ColumnhwPhysicalPortCrcExcResumeThresholdPower | read-write | current | The power value of MAC_FCS_EXC resume threshold. The range is 2 to 5. |
| 1.3.6.1.4.1.2011.5.25.157.1.14.1.1.42 | ColumnhwPhysicalPortCrcSdAlarmThresholdString | accessible-for-notify | current | The alarm threshold of MAC_FCS_SD. |
| 1.3.6.1.4.1.2011.5.25.157.1.14.1.1.43 | ColumnhwPhysicalPortCrcSdResumeThresholdString | accessible-for-notify | current | The resume threshold of MAC_FCS_SD. |
| 1.3.6.1.4.1.2011.5.25.157.1.14.1.1.44 | ColumnhwPhysicalPortCrcExcAlarmThresholdString | accessible-for-notify | current | The alarm threshold of MAC_FCS_EXC. |
| 1.3.6.1.4.1.2011.5.25.157.1.14.1.1.45 | ColumnhwPhysicalPortCrcExcResumeThresholdString | accessible-for-notify | current | The resume threshold of MAC_FCS_EXC. |
| 1.3.6.1.4.1.2011.5.25.157.1.14.1.1.46 | ColumnhwPhysicalPortCrcPerAlarmCoefficientStatistics | read-only | current | The coefficient value of CRC-PER(Packet Error Ratio) alarm statistics. |
| 1.3.6.1.4.1.2011.5.25.157.1.14.1.1.47 | ColumnhwPhysicalPortCrcPerAlarmPowerStatistics | read-only | current | The power value of CRC-PER(Packet Error Ratio) alarm statistics. |
| 1.3.6.1.4.1.2011.5.25.157.1.14.1.1.48 | ColumnhwPhysicalPortCrcSdAlarmTriggerLsp | read-write | current | Enable or disable the SD alarm result in switchover. The value -1 means do not support switchover;1 means the lsp switchover is enabled; 2 means switchover is … |
| 1.3.6.1.4.1.2011.5.25.157.1.14.1.1.49 | ColumnhwPhysicalPortCrcExcAlarmTriggerLsp | read-write | current | Enable or disable the EXC alarm result in switchover. The value -1 means do not support switchover;1 means the lsp switchover is enabled; 2 means switchover is… |
| 1.3.6.1.4.1.2011.5.25.157.1.14.1.1.50 | ColumnhwPhysicalPortCrcPerWarningThresholdCoefficient | read-write | current | The coefficient value of CRC-PER(Packet Error Ratio) warning threshold. The range is 1 to 9. |
| 1.3.6.1.4.1.2011.5.25.157.1.14.1.1.51 | ColumnhwPhysicalPortCrcPerWarningThresholdPower | read-write | current | The power value of CRC-PER(Packet Error Ratio) warning threshold. The range is 1 to 7. |
| 1.3.6.1.4.1.2011.5.25.157.1.14.1.1.52 | ColumnhwPhysicalPortCrcPerWarningResumeThresholdCoefficient | read-write | current | The coefficient value of CRC-PER(Packet Error Ratio) warning resume threshold. The range is 1 to 9. |
| 1.3.6.1.4.1.2011.5.25.157.1.14.1.1.53 | ColumnhwPhysicalPortCrcPerWarningResumeThresholdPower | read-write | current | The power value of CRC-PER(Packet Error Ratio) warning resume threshold. The range is 1 to 7. |
| 1.3.6.1.4.1.2011.5.25.157.1.14.1.1.54 | ColumnhwPhysicalPortCrcPerWarningThresholdString | accessible-for-notify | current | The warning threshold of CRC-PER(Packet Error Ratio). |
| 1.3.6.1.4.1.2011.5.25.157.1.14.1.1.55 | ColumnhwPhysicalPortCrcPerWarningResumeThresholdString | accessible-for-notify | current | The warning resume threshold of CRC-PER(Packet Error Ratio). |
| 1.3.6.1.4.1.2011.5.25.157.1.14.1.1.56 | ColumnhwPhysicalPortPreFecCoefficientStatistics | read-only | current | The coefficient value of PRE-FEC bit-error-ratio statistics. |
| 1.3.6.1.4.1.2011.5.25.157.1.14.1.1.57 | ColumnhwPhysicalPortPreFecPowerStatistics | read-only | current | The power value of PRE-FEC bit-error-ratio statistics. |
| 1.3.6.1.4.1.2011.5.25.157.1.14.1.1.58 | ColumnhwPhysicalPortErrorPerCurrentValueString | accessible-for-notify | current | The current value of error packets per second(Packet Error Ratio). |
| 1.3.6.1.4.1.2011.5.25.157.1.14.1.1.59 | ColumnhwPhysicalPortErrorPerAlarmThresholdString | accessible-for-notify | current | The warning threshold of error packets per second(Packet Error Ratio). |
| 1.3.6.1.4.1.2011.5.25.157.1.14.1.1.60 | ColumnhwInputBroadcastChangeThreshold | read-only | current | input broadcast rate Threshold. |
| 1.3.6.1.4.1.2011.5.25.157.1.14.1.1.61 | ColumnhwCurrentStatisticalInputBroadcast | read-only | current | current statistics of input broadcast. |
| 1.3.6.1.4.1.2011.5.25.157.1.14.1.1.62 | ColumnhwBaseStatisticalInputBroadcast | read-only | current | base statistics of input broadcast. |
| 1.3.6.1.4.1.2011.5.25.157.1.15 | NodehwPortAlarmDownEnable | |||
| 1.3.6.1.4.1.2011.5.25.157.1.15.1 | TablehwPortAlarmDownEnableTable | not-accessible | current | Enalbe or disable the port alarm result in physics down. This table lists the enable status of various port alarm. |
| 1.3.6.1.4.1.2011.5.25.157.1.15.1.1 | RowhwPortAlarmDownEnableEntry | not-accessible | current | Enalbe or disable the port alarm result in physics down. This table lists the enable status of various port alarm. |
| 1.3.6.1.4.1.2011.5.25.157.1.15.1.1.1 | ColumnhwPhysicalPortDownIfIndex | not-accessible | current | Interface index(es) of physical port(s) present on the device. |
| 1.3.6.1.4.1.2011.5.25.157.1.15.1.1.2 | ColumnhwPhysicalPortDownName | read-only | current | Interface name of physical port(s) present on the device. |
| 1.3.6.1.4.1.2011.5.25.157.1.15.1.1.3 | ColumnhwPhysicalPortCrcEnabledDown | read-write | current | Enalbe or disable the crc error alarm result in physics down, and the default value is disable. |
| 1.3.6.1.4.1.2011.5.25.157.1.15.1.1.4 | ColumnhwPhysicalPortSymbolEnabledDown | read-write | current | Enalbe or disable the symbol error alarm result in physics down, and the default value is disable. |
| 1.3.6.1.4.1.2011.5.25.157.1.15.1.1.5 | ColumnhwPhysicalPortInputEnabledDown | read-write | current | Enalbe or disable the input error alarm result in physics down, and the default value is disable. |
| 1.3.6.1.4.1.2011.5.25.157.1.15.1.1.6 | ColumnhwPhysicalPortOutputEnabledDown | read-write | current | Enalbe or disable the output error alarm result in physics down, and the default value is disable. |
| 1.3.6.1.4.1.2011.5.25.157.1.15.1.1.7 | ColumnhwPhysicalPortSdhEnabledDown | read-write | current | Enalbe or disable the sdh error alarm result in physics down, and the default value is disable. |
| 1.3.6.1.4.1.2011.5.25.157.1.15.1.1.8 | ColumnhwPhysicalPortBip8SdEnabledDown | read-write | current | Enalbe or disable the BIP8-SD error alarm result in physics down, and the default value is disable. |
| 1.3.6.1.4.1.2011.5.25.157.1.16 | NodehwPortProtectGroupCfg | |||
| 1.3.6.1.4.1.2011.5.25.157.1.16.1 | TablehwPortProtectGroupCfgTable | not-accessible | current | The table includes the information of the port protect group configuration information, and include the port group, working status of port etc. |
| 1.3.6.1.4.1.2011.5.25.157.1.16.1.1 | RowhwPortProtectGroupCfgEntry | not-accessible | current | The table includes the information of the port protect group configuration information. The index of the table is hwPortProtectGroupId. |
| 1.3.6.1.4.1.2011.5.25.157.1.16.1.1.1 | ColumnhwPortProtectGroupId | read-only | current | Port protect group index. |
| 1.3.6.1.4.1.2011.5.25.157.1.16.1.1.2 | ColumnhwPortProtectMasterIfIndex | read-create | current | The master interface index of port protect group. |
| 1.3.6.1.4.1.2011.5.25.157.1.16.1.1.3 | ColumnhwPortProtectMasterStatus | read-only | current | Working status of master port , include work, protect, down. work: the port in group is active. protect: master port is protect port. down: master port is inac… |
| 1.3.6.1.4.1.2011.5.25.157.1.16.1.1.4 | ColumnhwPortProtectSlaveIfIndex | read-create | current | The slave interface index of port protect group. |
| 1.3.6.1.4.1.2011.5.25.157.1.16.1.1.5 | ColumnhwPortProtectSlaveStatus | read-only | current | Working status of slave port , include work, protect, down. work: the port in group is active. protect: slave port is protect port. down: slave port is inactiv… |
| 1.3.6.1.4.1.2011.5.25.157.1.16.1.1.6 | ColumnhwPortProtectRowStatus | read-create | current | Status of port protect group row. |
| 1.3.6.1.4.1.2011.5.25.157.1.17 | NodehwPortLine | |||
| 1.3.6.1.4.1.2011.5.25.157.1.17.1 | TablehwPortLineTable | not-accessible | current | Indicates the link attributes of the interface. This table lists the link attributes of the interface. |
| 1.3.6.1.4.1.2011.5.25.157.1.17.1.1 | RowhwPortLineEntry | not-accessible | current | Indicates the link attributes of the interface. This table lists the link attributes of the interface. |
| 1.3.6.1.4.1.2011.5.25.157.1.17.1.1.1 | ColumnhwPortLineIfIndex | not-accessible | current | Interface index(es) of port(s) present on the device . |
| 1.3.6.1.4.1.2011.5.25.157.1.17.1.1.2 | ColumnhwPortLineUpStreampbo | read-only | current | Indicates the upstream power back-off of the interface. |
| 1.3.6.1.4.1.2011.5.25.157.1.17.1.1.3 | ColumnhwPortLineDownStreampbo | read-only | current | Indicates the downstream power back-off of the interface. |
| 1.3.6.1.4.1.2011.5.25.157.1.17.1.1.4 | ColumnhwPortLineUpStreamLoopAtten | read-only | current | Indicates the upstream loopback attenuation of the interface. |
| 1.3.6.1.4.1.2011.5.25.157.1.17.1.1.5 | ColumnhwPortLineDownStreamLoopAtten | read-only | current | Indicates the downstream loopback attenuation of the interface. |
| 1.3.6.1.4.1.2011.5.25.157.1.17.1.1.6 | ColumnhwPortLineUpStreamSnrMargin | read-only | current | Indicates the upstream SNR margin of the interface. |
| 1.3.6.1.4.1.2011.5.25.157.1.17.1.1.7 | ColumnhwPortLineDownStreamSnrMargin | read-only | current | Indicates the downstream SNR margin of the interface. |
| 1.3.6.1.4.1.2011.5.25.157.1.17.1.1.8 | ColumnhwPortLineSpeed | read-only | current | Indicates the negotiated rate of the interface. |
| 1.3.6.1.4.1.2011.5.25.157.1.18 | NodehwPortIfStatistics | |||
| 1.3.6.1.4.1.2011.5.25.157.1.18.1 | TablehwPortIfStatTable | not-accessible | current | This table lists the number of packets of the interface. |
| 1.3.6.1.4.1.2011.5.25.157.1.18.1.1 | RowhwPortIfStatEntry | not-accessible | current | This table lists the number of packets of the interface. |
| 1.3.6.1.4.1.2011.5.25.157.1.18.1.1.1 | ColumnhwPortIfStatIfIndex | not-accessible | current | Interface index(es) of port(s) present on the device . |
| 1.3.6.1.4.1.2011.5.25.157.1.18.1.1.2 | ColumnhwPortIfStatIfInCrcPkts | read-only | current | Indicates the number of packets which the CRC operates. |
| 1.3.6.1.4.1.2011.5.25.157.1.18.2 | TablehwIPIfStatTable | not-accessible | current | This table lists the number of ip packets of the interface. |
| 1.3.6.1.4.1.2011.5.25.157.1.18.2.1 | RowhwIPIfStatEntry | not-accessible | current | This table lists the number of ip packets of the interface. |
| 1.3.6.1.4.1.2011.5.25.157.1.18.2.1.1 | ColumnhwIpIfStatsIPVersion | read-only | current | The version of packets protocol. |
| 1.3.6.1.4.1.2011.5.25.157.1.18.2.1.2 | ColumnhwIpIfStatsIfIndex | not-accessible | current | Interface index(es) of port(s) present on the device . |
| 1.3.6.1.4.1.2011.5.25.157.1.18.2.1.3 | ColumnhwIpIfInOctetRate | read-only | current | The ip rate of octets received on the interface . |
| 1.3.6.1.4.1.2011.5.25.157.1.18.2.1.4 | ColumnhwIpIfInPktRate | read-only | current | The ip rate of packets received on the interface . |
| 1.3.6.1.4.1.2011.5.25.157.1.18.2.1.5 | ColumnhwIpIfOutOctetRate | read-only | current | The ip rate of octets transmitted out of the interface . |
| 1.3.6.1.4.1.2011.5.25.157.1.18.2.1.6 | ColumnhwIpIfOutPktRate | read-only | current | The ip rate of packets transmitted out of the interface . |
| 1.3.6.1.4.1.2011.5.25.157.1.18.2.1.7 | ColumnhwIpIfInOctets | read-only | current | The ip octets received on the interface . |
| 1.3.6.1.4.1.2011.5.25.157.1.18.2.1.8 | ColumnhwIpIfInPkts | read-only | current | The ip packets received on the interface . |
| 1.3.6.1.4.1.2011.5.25.157.1.18.2.1.9 | ColumnhwIpIfOutOctets | read-only | current | The ip octets transmitted out of the interface . |
| 1.3.6.1.4.1.2011.5.25.157.1.18.2.1.10 | ColumnhwIpIfOutPkts | read-only | current | The ip packets transmitted out of the interface . |
| 1.3.6.1.4.1.2011.5.25.157.1.19 | NodehwPortDescription | |||
| 1.3.6.1.4.1.2011.5.25.157.1.19.1 | TablehwPortDescriptionTable | not-accessible | current | This table lists the description of interfaces. |
| 1.3.6.1.4.1.2011.5.25.157.1.19.1.1 | RowhwPortDescriptionEntry | not-accessible | current | This table lists the description of interfaces. |
| 1.3.6.1.4.1.2011.5.25.157.1.19.1.1.1 | ColumnhwPortDescriptionIfIndex | read-only | current | Interface index(es) of port(s) present on the device. |
| 1.3.6.1.4.1.2011.5.25.157.1.19.1.1.2 | ColumnhwPortDescriptionIfPortDescription | read-write | current | Indicates the description of ports. |
| 1.3.6.1.4.1.2011.5.25.157.1.20 | NodehwPRBSTestInfo | |||
| 1.3.6.1.4.1.2011.5.25.157.1.20.1 | TablehwPRBSTestPortStatusTable | not-accessible | current | This table lists the capability and result of PRBS test. |
| 1.3.6.1.4.1.2011.5.25.157.1.20.1.1 | RowhwPRBSTestPortStatusEntry | not-accessible | current | This table lists the capability and result of PRBS test. |
| 1.3.6.1.4.1.2011.5.25.157.1.20.1.1.1 | ColumnhwPRBSTestPortStatusIfName | read-only | current | Interface name of port(s) present on the device. |
| 1.3.6.1.4.1.2011.5.25.157.1.20.1.1.2 | ColumnhwPRBSTestPortStatusSide | read-only | current | Indicate PRBS test side. |
| 1.3.6.1.4.1.2011.5.25.157.1.20.1.1.3 | ColumnhwPRBSTestPortStatusSuportFlag | read-only | current | Whether PRBS test supported. |
| 1.3.6.1.4.1.2011.5.25.157.1.20.1.1.4 | ColumnhwPRBSTestPortStatusPatternBitmap | read-only | current | Indicate supported PRBS pattern by bitmap. bit 0 - 3 : PRBS15, PRBS20, PRBS23, QRSS, bit 4 - 7 : 0S, 1S, ALT-0-1, 1IN8, bit 8 - 11 : 3IN24, PRBS6, PRBS9, PRBS1… |
| 1.3.6.1.4.1.2011.5.25.157.1.20.1.1.5 | ColumnhwPRBSTestPortStatusErrInsertLevel | read-only | current | Indicate the supported err-insert level. It's described by bitmap. From low to high, the different bit position indicates whether or not support 1, 1e-1, 1e-2,… |
| 1.3.6.1.4.1.2011.5.25.157.1.20.1.1.6 | ColumnhwPRBSTestPortStatusSlotNum | read-only | current | Slot ID of the testing phyicial port. |
| 1.3.6.1.4.1.2011.5.25.157.1.20.1.1.7 | ColumnhwPRBSTestPortStatusCardNum | read-only | current | Card ID of the testing phyicial port. |
| 1.3.6.1.4.1.2011.5.25.157.1.20.1.1.8 | ColumnhwPRBSTestPortStatusPhyPortIfName | read-only | current | Interface Name of the testing phyicial port. |
| 1.3.6.1.4.1.2011.5.25.157.1.20.1.1.9 | ColumnhwPRBSTestPortStatusResultCount | read-only | current | Total count of PRBS test history result. |
| 1.3.6.1.4.1.2011.5.25.157.1.20.1.1.10 | ColumnhwPRBSTestPortStatusOngoingTestIndex | read-only | current | Indicate the ongoing PRBS testing index of current interface. |
| 1.3.6.1.4.1.2011.5.25.157.1.20.2 | TablehwPRBSTestResultTable | not-accessible | current | This table lists PRBS test result info. |
| 1.3.6.1.4.1.2011.5.25.157.1.20.2.1 | RowhwPRBSTestResultEntry | not-accessible | current | This table lists PRBS test result info. |
| 1.3.6.1.4.1.2011.5.25.157.1.20.2.1.1 | ColumnhwPRBSTestResultIfName | read-only | current | Interface name of port(s) present on the device. |
| 1.3.6.1.4.1.2011.5.25.157.1.20.2.1.2 | ColumnhwPRBSTestResultTestIndex | read-only | current | Indicate the PRBS test hisotry test index. 0 is invalid. |
| 1.3.6.1.4.1.2011.5.25.157.1.20.2.1.3 | ColumnhwPRBSTestResultPhyPortIfName | read-only | current | Interface Name of the testing phyicial port. |
| 1.3.6.1.4.1.2011.5.25.157.1.20.2.1.4 | ColumnhwPRBSTestResultSide | read-only | current | Indicate PRBS test side. |
| 1.3.6.1.4.1.2011.5.25.157.1.20.2.1.5 | ColumnhwPRBSTestResultPattern | read-only | current | Indicate PRBS pattern. Refer to hwPRBSTestPortStatusPatternBitmap, but single bit here. |
| 1.3.6.1.4.1.2011.5.25.157.1.20.2.1.6 | ColumnhwPRBSTestResultIntervalTime | read-only | current | Period time of each interval, in second. |
| 1.3.6.1.4.1.2011.5.25.157.1.20.2.1.7 | ColumnhwPRBSTestResultIntervalCount | read-only | current | PRBS test interval repeat count. |
| 1.3.6.1.4.1.2011.5.25.157.1.20.2.1.8 | ColumnhwPRBSTestResultTestingIntervalIndex | read-only | current | Indicate the ongoing testing interval index. |
| 1.3.6.1.4.1.2011.5.25.157.1.20.2.1.9 | ColumnhwPRBSTestResultStartTime | read-only | current | Start time of the test. |
| 1.3.6.1.4.1.2011.5.25.157.1.20.2.1.10 | ColumnhwPRBSTestResultStopTime | read-only | current | Stop time of the test. |
| 1.3.6.1.4.1.2011.5.25.157.1.20.2.1.11 | ColumnhwPRBSTestResultProgress | read-only | current | Prgress of the test. 100 means 100%. |
| 1.3.6.1.4.1.2011.5.25.157.1.20.2.1.12 | ColumnhwPRBSTestResultRemainTime | read-only | current | Remaining time of the test, in second. |
| 1.3.6.1.4.1.2011.5.25.157.1.20.2.1.13 | ColumnhwPRBSTestResultErrInserted | read-only | current | Whether error-bit inserted of the test |
| 1.3.6.1.4.1.2011.5.25.157.1.20.2.1.14 | ColumnhwPRBSTestResultTotalBit | read-only | current | Total-bit of the test. |
| 1.3.6.1.4.1.2011.5.25.157.1.20.2.1.15 | ColumnhwPRBSTestResultErrorBit | read-only | current | Error-bit of the test. |
| 1.3.6.1.4.1.2011.5.25.157.1.20.2.1.16 | ColumnhwPRBSTestResultBerCoe | read-only | current | The coefficient value of bit-error-ratio. |
| 1.3.6.1.4.1.2011.5.25.157.1.20.2.1.17 | ColumnhwPRBSTestResultBerPow | read-only | current | The power value of bit-error-ratio. |
| 1.3.6.1.4.1.2011.5.25.157.1.20.2.1.18 | ColumnhwPRBSTestResultLos | read-only | current | Loss of sync second. |
| 1.3.6.1.4.1.2011.5.25.157.1.20.2.1.19 | ColumnhwPRBSTestResultEs | read-only | current | Error second. |
| 1.3.6.1.4.1.2011.5.25.157.1.20.2.1.20 | ColumnhwPRBSTestResultEfs | read-only | current | Error free second. |
| 1.3.6.1.4.1.2011.5.25.157.1.20.2.1.21 | ColumnhwPRBSTestResultSes | read-only | current | Severely error second, comparing with 1E-3. |
| 1.3.6.1.4.1.2011.5.25.157.1.20.2.1.22 | ColumnhwPRBSTestResultUas | read-only | current | Unavaliable seconds. Continuous severely error seconds, start counting with the 11th SES. |
| 1.3.6.1.4.1.2011.5.25.157.1.20.2.1.23 | ColumnhwPRBSTestResultSegmentTime | read-only | current | Period time of each segment, in second. |
| 1.3.6.1.4.1.2011.5.25.157.1.20.2.1.24 | ColumnhwPRBSTestResultSegmentTotalCount | read-only | current | Segment count of the whole PRBS test. |
| 1.3.6.1.4.1.2011.5.25.157.1.20.2.1.25 | ColumnhwPRBSTestResultTestingSegmentIndex | read-only | current | Indicate the ongoing testing segment index. |
| 1.3.6.1.4.1.2011.5.25.157.1.20.3 | TablehwPRBSTestIntervalTable | not-accessible | current | This table lists PRBS test interval info. |
| 1.3.6.1.4.1.2011.5.25.157.1.20.3.1 | RowhwPRBSTestIntervalEntry | not-accessible | current | This table lists PRBS test interval info. |
| 1.3.6.1.4.1.2011.5.25.157.1.20.3.1.1 | ColumnhwPRBSTestIntervalIfName | read-only | current | Interface name of port(s) present on the device. |
| 1.3.6.1.4.1.2011.5.25.157.1.20.3.1.2 | ColumnhwPRBSTestIntervalTestIndex | read-only | current | Indicate the PRBS test hisotry test index. 0 is invalid. |
| 1.3.6.1.4.1.2011.5.25.157.1.20.3.1.3 | ColumnhwPRBSTestIntervalIndex | read-only | current | Indicate the interval index of a test. 0 is invalid. |
| 1.3.6.1.4.1.2011.5.25.157.1.20.3.1.4 | ColumnhwPRBSTestIntervalStartTime | read-only | current | Start time of the interval. |
| 1.3.6.1.4.1.2011.5.25.157.1.20.3.1.5 | ColumnhwPRBSTestIntervalStopTime | read-only | current | Stop time of the interval |
| 1.3.6.1.4.1.2011.5.25.157.1.20.3.1.6 | ColumnhwPRBSTestIntervalProgress | read-only | current | Prgress of the interval. 100 means 100%. |
| 1.3.6.1.4.1.2011.5.25.157.1.20.3.1.7 | ColumnhwPRBSTestIntervalRemainTime | read-only | current | Remaining time of the interval, in second. |
| 1.3.6.1.4.1.2011.5.25.157.1.20.3.1.8 | ColumnhwPRBSTestIntervalErrInserted | read-only | current | Whether error-bit inserted of the interval |
| 1.3.6.1.4.1.2011.5.25.157.1.20.3.1.9 | ColumnhwPRBSTestIntervalTotalBit | read-only | current | Total-bit of the interval. |
| 1.3.6.1.4.1.2011.5.25.157.1.20.3.1.10 | ColumnhwPRBSTestIntervalErrorBit | read-only | current | Error-bit of the interval. |
| 1.3.6.1.4.1.2011.5.25.157.1.20.3.1.11 | ColumnhwPRBSTestIntervalBerCoe | read-only | current | The coefficient value of bit-error-ratio. |
| 1.3.6.1.4.1.2011.5.25.157.1.20.3.1.12 | ColumnhwPRBSTestIntervalBerPow | read-only | current | The power value of bit-error-ratio. |
| 1.3.6.1.4.1.2011.5.25.157.1.20.3.1.13 | ColumnhwPRBSTestIntervalLos | read-only | current | Loss of sync second. |
| 1.3.6.1.4.1.2011.5.25.157.1.20.3.1.14 | ColumnhwPRBSTestIntervalEs | read-only | current | Error second. |
| 1.3.6.1.4.1.2011.5.25.157.1.20.3.1.15 | ColumnhwPRBSTestIntervalEfs | read-only | current | Error free second. |
| 1.3.6.1.4.1.2011.5.25.157.1.20.3.1.16 | ColumnhwPRBSTestIntervalSes | read-only | current | Severely error second, comparing with 1E-3. |
| 1.3.6.1.4.1.2011.5.25.157.1.20.3.1.17 | ColumnhwPRBSTestIntervalUas | read-only | current | Unavaliable seconds. Continuous severely error seconds, start counting with the 11th SES. |
| 1.3.6.1.4.1.2011.5.25.157.1.20.4 | TablehwPRBSTestSegmentTable | not-accessible | current | This table lists PRBS test segment info. |
| 1.3.6.1.4.1.2011.5.25.157.1.20.4.1 | RowhwPRBSTestSegmentEntry | not-accessible | current | This table lists PRBS test segment info. |
| 1.3.6.1.4.1.2011.5.25.157.1.20.4.1.1 | ColumnhwPRBSTestSegmentIfName | read-only | current | Interface name of port(s) present on the device. |
| 1.3.6.1.4.1.2011.5.25.157.1.20.4.1.2 | ColumnhwPRBSTestSegmentTestIndex | read-only | current | Indicate the PRBS test index. 0 is invalid. |
| 1.3.6.1.4.1.2011.5.25.157.1.20.4.1.3 | ColumnhwPRBSTestSegmentIndex | read-only | current | Indicate the segment index of a test. 0 is invalid. |
| 1.3.6.1.4.1.2011.5.25.157.1.20.4.1.4 | ColumnhwPRBSTestSegmentStartTime | read-only | current | Start time of the interval. |
| 1.3.6.1.4.1.2011.5.25.157.1.20.4.1.5 | ColumnhwPRBSTestSegmentEndTime | read-only | current | Stop time of the interval |
| 1.3.6.1.4.1.2011.5.25.157.1.20.4.1.6 | ColumnhwPRBSTestSegmentTotalBit | read-only | current | Total-bit of the segment. |
| 1.3.6.1.4.1.2011.5.25.157.1.20.4.1.7 | ColumnhwPRBSTestSegmentErrorBit | read-only | current | Error-bit of the segment. |
| 1.3.6.1.4.1.2011.5.25.157.1.20.4.1.8 | ColumnhwPRBSTestSegmentBerCoe | read-only | current | The coefficient value of bit-error-ratio. |
| 1.3.6.1.4.1.2011.5.25.157.1.20.4.1.9 | ColumnhwPRBSTestSegmentBerPow | read-only | current | The power value of bit-error-ratio. |
| 1.3.6.1.4.1.2011.5.25.157.1.20.4.1.10 | ColumnhwPRBSTestSegmentLos | read-only | current | Loss of sync second. |
| 1.3.6.1.4.1.2011.5.25.157.1.20.4.1.11 | ColumnhwPRBSTestSegmentEs | read-only | current | Error second. |
| 1.3.6.1.4.1.2011.5.25.157.1.20.4.1.12 | ColumnhwPRBSTestSegmentEfs | read-only | current | Error free second. |
| 1.3.6.1.4.1.2011.5.25.157.1.20.4.1.13 | ColumnhwPRBSTestSegmentSes | read-only | current | Severely error second, comparing with 1E-3. |
| 1.3.6.1.4.1.2011.5.25.157.1.20.4.1.14 | ColumnhwPRBSTestSegmentUas | read-only | current | Unavaliable seconds. Continuous severely error seconds, start counting with the 11th SES. |
| 1.3.6.1.4.1.2011.5.25.157.1.21 | NodehwOtn | |||
| 1.3.6.1.4.1.2011.5.25.157.1.21.1 | TablehwOtnTable | not-accessible | current | Indicates the otn attributes of the WDM interface. |
| 1.3.6.1.4.1.2011.5.25.157.1.21.1.1 | RowhwOtnEntry | not-accessible | current | This table lists the otn attributes of the WDM interface. |
| 1.3.6.1.4.1.2011.5.25.157.1.21.1.1.1 | ColumnhwOtnIfIndex | not-accessible | current | Interface index(es) of port(s) present on the device. |
| 1.3.6.1.4.1.2011.5.25.157.1.21.1.1.2 | ColumnhwOtnFecMode | read-write | current | Indicates the Fec mode of the WDM interface. By default, the Fec mode is standard. |
| 1.3.6.1.4.1.2011.5.25.157.1.21.1.1.3 | ColumnhwOtnFec0bitStatistics | read-only | current | The value of FEC 0 bit statistics. |
| 1.3.6.1.4.1.2011.5.25.157.1.21.1.1.4 | ColumnhwOtnFec1bitStatistics | read-only | current | The value of FEC 1 bit statistics. |
| 1.3.6.1.4.1.2011.5.25.157.1.21.1.1.5 | ColumnhwOtnFec0And1TypeStatistics | read-only | current | The value of FEC 0 and 1 type statistics. |
| 1.3.6.1.4.1.2011.5.25.157.1.21.1.1.6 | ColumnhwOtnFecSymbolErrStatistics | read-only | current | The value of FEC symbol error statistics. |
| 1.3.6.1.4.1.2011.5.25.157.1.21.1.1.7 | ColumnhwOtnFecUncorrectErrStatistics | read-only | current | The value of FEC uncorrect error statistics. |
| 1.3.6.1.4.1.2011.5.25.157.1.21.1.1.8 | ColumnhwOtnPreFecBERCoefficient | read-only | current | The coefficient value of Pre-FEC BER. |
| 1.3.6.1.4.1.2011.5.25.157.1.21.1.1.9 | ColumnhwOtnPreFecBERPower | read-only | current | The power value of Pre-FEC BER. |
| 1.3.6.1.4.1.2011.5.25.157.1.21.1.1.10 | ColumnhwOtnAfterFecBERCoefficient | read-only | current | The coefficient value of After-FEC BER. |
| 1.3.6.1.4.1.2011.5.25.157.1.21.1.1.11 | ColumnhwOtnAfterFecBERPower | read-only | current | The power value of After-FEC BER. |
| 1.3.6.1.4.1.2011.5.25.157.1.21.1.1.14 | ColumnhwOtnOSNR | read-only | current | The value of optical signal-to-noise ratio. |
| 1.3.6.1.4.1.2011.5.25.157.1.22 | NodehwLogicalPort | |||
| 1.3.6.1.4.1.2011.5.25.157.1.22.1 | TablehwLogicalPortTable | not-accessible | current | This table lists the working status of the logical ports. |
| 1.3.6.1.4.1.2011.5.25.157.1.22.1.1 | RowhwLogicalPortEntry | not-accessible | current | This table lists the working status of the logical ports. |
| 1.3.6.1.4.1.2011.5.25.157.1.22.1.1.1 | ColumnhwLogicalPortIfIndex | read-only | current | Interface index(es) of the logical port(s) present on the device . |
| 1.3.6.1.4.1.2011.5.25.157.1.22.1.1.2 | ColumnhwLogicalPortStatisticEnable | read-write | current | Indicates the statistic enable status of the logical port(s) . |
| 1.3.6.1.4.1.2011.5.25.157.1.23 | NodehwNarrowBand | |||
| 1.3.6.1.4.1.2011.5.25.157.1.23.1 | TablehwEmTable | not-accessible | current | This table lists the attributes of all E&M interfaces. |
| 1.3.6.1.4.1.2011.5.25.157.1.23.1.1 | RowhwEmEntry | not-accessible | current | This table lists the attributes of all E&M interfaces. |
| 1.3.6.1.4.1.2011.5.25.157.1.23.1.1.1 | ColumnhwEmIfIndex | not-accessible | current | The value of this object identifies the index of an E&M interface. |
| 1.3.6.1.4.1.2011.5.25.157.1.23.1.1.2 | ColumnhwEmPcmMode | read-write | current | This object indicates the PCM mode of an E&M interface. The value can be A-Law or U-Law. The default value is A-Law. |
| 1.3.6.1.4.1.2011.5.25.157.1.23.1.1.3 | ColumnhwEmSignalMode | read-write | current | This object indicates the signaling mode of an E&M interface. The value can be Bell-1,Bell-2,Bell-3,Bell-4 or Bell-5. The default value is Bell-5. |
| 1.3.6.1.4.1.2011.5.25.157.1.23.1.1.4 | ColumnhwEmReceiveGain | read-write | current | This object indicates the receive gain of an E&M interface. The value ranges from -20 to 1.5 with a step of 0.5, in dB. The default value is 0 dB. |
| 1.3.6.1.4.1.2011.5.25.157.1.23.1.1.5 | ColumnhwEmSendGain | read-write | current | This object indicates the transmit gain of an E&M interface. The value ranges from -7 to 13.5 with a step of 0.5, in dB. The default value is 0 dB. |
| 1.3.6.1.4.1.2011.5.25.157.1.23.1.1.6 | ColumnhwEmUserLine | read-write | current | This object indicates the user line mode of an E&M interface. The value can be 2-wire or 4-wire. The default value is 4-wire. |
| 1.3.6.1.4.1.2011.5.25.157.1.23.2 | TablehwFxsoTable | not-accessible | current | This table lists the attributes of all FXS/FXO interfaces. |
| 1.3.6.1.4.1.2011.5.25.157.1.23.2.1 | RowhwFxsoEntry | not-accessible | current | This table lists the attributes of all FXS/FXO interfaces. |
| 1.3.6.1.4.1.2011.5.25.157.1.23.2.1.1 | ColumnhwFxsoIfIndex | not-accessible | current | The value of this object identifies the index of an FXS/FXO. |
| 1.3.6.1.4.1.2011.5.25.157.1.23.2.1.2 | ColumnhwFxsoPortMode | read-write | current | This object indicates the type of an FXS/FXO interface. For AND1MPAA PICs, the last four ports (ports 6, 7, 8, and 9) can work either in fxo or fxs mode. The d… |
| 1.3.6.1.4.1.2011.5.25.157.1.23.2.1.3 | ColumnhwFxsoPcmMode | read-write | current | This object indicates the PCM mode of an FXS/FXO interface. The value can be A-Law or U-Law. The default value is A-Law. |
| 1.3.6.1.4.1.2011.5.25.157.1.23.2.1.4 | ColumnhwFxsCurrent | read-write | current | This object indicates the current of an FXS interface. The value can be 16mA or 20mA. The default value is 16mA. |
| 1.3.6.1.4.1.2011.5.25.157.1.23.2.1.5 | ColumnhwFxsImpedance | read-write | current | This object indicates the impedance of an FXS interface.The value can be: value 0: 600 ohm value 1: 900 ohm value 2: 270 ohm + (750 ohm || 150 nF) and 275 ohm … |
| 1.3.6.1.4.1.2011.5.25.157.1.23.2.1.6 | ColumnhwFxsReceiveGain | read-write | current | This object indicates the receive gain of an FXS interface. The value ranges from -12 to 0 with a step of 0.5, in dB. The default value is -7 dB. |
| 1.3.6.1.4.1.2011.5.25.157.1.23.2.1.7 | ColumnhwFxsSendGain | read-write | current | This object indicates the transmit gain of an FXS interface. The value ranges from -6 to 5 with a step of 0.5, in dB. The default value is 0 dB. |
| 1.3.6.1.4.1.2011.5.25.157.1.23.2.1.8 | ColumnhwFxsLineLock | read-write | current | This object indicates whether line lock is enabled for an FXS interface. The value can be enable or disable. The default value is enable. |
| 1.3.6.1.4.1.2011.5.25.157.1.23.2.1.9 | ColumnhwFxsHotLine | read-write | current | This object indicates whether the hotline function is enabled for an FXS interface. The value can be enable or disable. The default value is enable. |
| 1.3.6.1.4.1.2011.5.25.157.1.23.2.1.10 | ColumnhwFxoFeedMaxVoltage | read-write | current | This object indicates the maximum feed voltage allowed by an FXO interface. The value ranges from -100 to 0. The default value is -20V. |
| 1.3.6.1.4.1.2011.5.25.157.1.23.2.1.11 | ColumnhwFxoFeedMinVoltage | read-write | current | This object indicates the minimum feed voltage allowed by an FXO interface. The value ranges from -100 to 0. The default value is -80V. |
| 1.3.6.1.4.1.2011.5.25.157.1.23.2.1.12 | ColumnhwFxoFeedMaxCurrent | read-write | current | This object indicates the maximum feed current allowed by an FXO interface. The value can be 25mA,30mA,35mA or 40mA. The default value is 35mA. |
| 1.3.6.1.4.1.2011.5.25.157.1.23.2.1.13 | ColumnhwFxoFeedMinCurrent | read-write | current | This object indicates the minimum feed current allowed by an FXO interface. The value can be 16mA,17mA,18mA,19mA or 20mA. The default value is 16mA. |
| 1.3.6.1.4.1.2011.5.25.157.1.23.2.1.14 | ColumnhwFxoReceiveGain | read-write | current | This object indicates the receive gain of an FXO interface. The value ranges from -6 to 5 with a step of 0.5, in dB. The default value is 0 dB. |
| 1.3.6.1.4.1.2011.5.25.157.1.23.2.1.15 | ColumnhwFxoSendGain | read-write | current | This object indicates the transmit gain of an FXO interface. The value ranges from -6 to 5 with a step of 0.5, in dB. The default value is 0 dB. |
| 1.3.6.1.4.1.2011.5.25.157.1.23.2.1.16 | ColumnhwFxoDcImpedance | read-write | current | This object indicates the DC impedance of an FXO interface. The value can be 50 ohm or 800 ohm. The default value is 50 ohm. |
| 1.3.6.1.4.1.2011.5.25.157.1.23.2.1.17 | ColumnhwFxoAcImpedance | read-write | current | This object indicates the AC impedance of an FXO interface.The value can be: value 0: 600 ohm value 1: 900 ohm value 2: 270 ohm + (750 ohm || 150 nF) and 275 o… |
| 1.3.6.1.4.1.2011.5.25.157.1.23.2.1.18 | ColumnhwFxoRingMinDuration | read-write | current | This object indicates the minimum duration that an FXO interface takes to confirm a ringing current. The value can be 100ms,150ms,200ms,256ms,384ms,512ms,640ms… |
| 1.3.6.1.4.1.2011.5.25.157.1.23.2.1.19 | ColumnhwFxoRingMaxInterval | read-write | current | This object indicates a ringing current timeout period on a FXO interface. The default value is notuse. |
| 1.3.6.1.4.1.2011.5.25.157.1.23.2.1.20 | ColumnhwFxoRingFrequence | read-write | current | This object indicates a ringing current's frequency detected by an FXO interface. The value can be 16hz,25hz or 50hz. The default value is 25hz. |
| 1.3.6.1.4.1.2011.5.25.157.1.23.2.1.21 | ColumnhwFxoRingAcAmplitude | read-write | current | This object indicates a ringing current's AC amplitude detected by an FXO interface. The value can be 74V,65V or 50V. The default value is 50V. |
| 1.3.6.1.4.1.2011.5.25.157.1.23.2.1.22 | ColumnhwFxoRingOffset | read-write | current | This object indicates a ringing current's AC offset detected by an FXO interface. The value ranges from 0 to 100. The default value is 70mA. |
| 1.3.6.1.4.1.2011.5.25.157.1.23.3 | TablehwRsTable | not-accessible | current | This table lists the attributes of all RS interfaces. |
| 1.3.6.1.4.1.2011.5.25.157.1.23.3.1 | RowhwRsEntry | not-accessible | current | This table lists the attributes of all RS interfaces. |
| 1.3.6.1.4.1.2011.5.25.157.1.23.3.1.1 | ColumnhwRsIfIndex | not-accessible | current | The value of this object identifies the index of a serial interface on a device. |
| 1.3.6.1.4.1.2011.5.25.157.1.23.3.1.2 | ColumnhwRsPortMode | read-write | current | This object indicates the type of a serial interface. The value can be rs-232,rs-485,rs-422,,v.24,x.21 or v.35. For AND1MPAA PICs: Ports 0 and 2 work in rs-232… |
| 1.3.6.1.4.1.2011.5.25.157.1.23.3.1.3 | ColumnhwRsWorkMode | read-write | current | This object indicates the mode in which a serial interface works. The value can be dce or dte. The default value is dce. |
| 1.3.6.1.4.1.2011.5.25.157.1.23.3.1.4 | ColumnhwRsPhysicalMode | read-write | current | This object indicates the mode in which a serial interface transmits signals. The value can be async or sync. The default value is async. |
| 1.3.6.1.4.1.2011.5.25.157.1.23.3.1.5 | ColumnhwRsClockSource | read-write | current | This object indicates the clock source mode of a serial interface. The value can be internal,external or slave. The default value is internal. |
| 1.3.6.1.4.1.2011.5.25.157.1.23.3.1.6 | ColumnhwRsBaudrate | read-write | current | This object indicates the baud rate of a serial interface. The value can be : 0: 600bit/s, 1: 1200bit/s, 2: 2400bit/s, 3: 4800bit/s, 4: 9600bit/s, 5: 19200bit/… |
| 1.3.6.1.4.1.2011.5.25.157.1.23.3.1.7 | ColumnhwRsClockSendMode | read-write | current | This object indicates the mode in which clock signals transmitted by a serial interface are sampled. This mode can be configured in synchronous clock mode. The… |
| 1.3.6.1.4.1.2011.5.25.157.1.23.3.1.8 | ColumnhwRsClockReceiveMode | read-write | current | This object indicates the mode in which clock signals received by a serial interface are sampled. This mode can be configured in synchronous clock mode. The va… |
| 1.3.6.1.4.1.2011.5.25.157.1.23.3.1.9 | ColumnhwRsParity | read-write | current | This object indicates the parity check mode of a serial interface's asynchronous frames. This mode can be configured in asynchronous clock mode. The value can … |
| 1.3.6.1.4.1.2011.5.25.157.1.23.3.1.10 | ColumnhwRsStopbits | read-write | current | This object indicates the number of stop bits contained in a serial interface's asynchronous frame. This object can be configured in asynchronous clock mode. T… |
| 1.3.6.1.4.1.2011.5.25.157.1.23.3.1.11 | ColumnhwRsDatabits | read-write | current | This object indicates the number of data bits contained in a serial interface's asynchronous frame. This object can be configured in asynchronous clock mode. T… |
| 1.3.6.1.4.1.2011.5.25.157.1.23.3.1.12 | ColumnhwRsMuxProtocol | read-write | current | This object indicates the type of a serial interface's sub-rate multiplexing protocol. This object can be configured in asynchronous clock mode. The value can … |
| 1.3.6.1.4.1.2011.5.25.157.1.23.3.1.13 | ColumnhwRsX50PhaseMode | read-write | current | This object indicates the envelope phase mode multiplexed by a serial interface's x.50 sub-rate. The value can be sequence or interval. The default value is se… |
| 1.3.6.1.4.1.2011.5.25.157.1.23.4 | TablehwGlobalCfgTable | not-accessible | current | This table lists the global physical attributes of all narrowband interfaces. |
| 1.3.6.1.4.1.2011.5.25.157.1.23.4.1 | RowhwGlobalCfgEntry | not-accessible | current | This table lists the global physical attributes of all narrowband interfaces. |
| 1.3.6.1.4.1.2011.5.25.157.1.23.4.1.1 | ColumnhwNarrowBandCardId | read-only | current | The value of this object identifies the ID of a narrowband card on a device. |
| 1.3.6.1.4.1.2011.5.25.157.1.23.4.1.2 | ColumnhwSignalMode | read-write | current | Indicates the global signal mode of the physical serial interface. By default, the signal mode is bell5. This object indicates the global signaling mode of an … |
| 1.3.6.1.4.1.2011.5.25.157.1.23.4.1.3 | ColumnhwUserLine | read-write | current | This object indicates the global user line mode of an E&M interface. The value can be 2-wire or 4-wire. The default value is 4-wire. |
| 1.3.6.1.4.1.2011.5.25.157.1.23.5 | TablehwNbCommonTable | not-accessible | current | This table lists the common attributes of all narrowband interfaces. |
| 1.3.6.1.4.1.2011.5.25.157.1.23.5.1 | RowhwNbCommonEntry | not-accessible | current | This table lists the common attributes of all narrowband interfaces. |
| 1.3.6.1.4.1.2011.5.25.157.1.23.5.1.1 | ColumnhwNbIfIndex | not-accessible | current | The value of this object identifies the index of an narrowband interface. |
| 1.3.6.1.4.1.2011.5.25.157.1.23.5.1.2 | ColumnhwNbLoopback | read-write | current | The local loopback of an narrowband interface is used to test the interface itself. By default, stopLoopback is used. |
| 1.3.6.1.4.1.2011.5.25.157.1.23.5.1.3 | ColumnhwNbPortType | read-only | current | This object indicates the type of a serial interface. |
| 1.3.6.1.4.1.2011.5.25.157.1.23.5.1.4 | ColumnhwNbAcBlock | read-only | current | This object indicates the AC state of a serial interface. |
| 1.3.6.1.4.1.2011.5.25.157.1.23.5.1.5 | ColumnhwNbTimeDelayMaster | read-only | current | This object indicates the delay configured for the primary link of a serial interface. |
| 1.3.6.1.4.1.2011.5.25.157.1.23.5.1.6 | ColumnhwNbTimeDelaySlave | read-only | current | This object indicates the delay configured for the secondary link of a serial interface. |
| 1.3.6.1.4.1.2011.5.25.157.1.23.5.1.7 | ColumnhwNbRealTimeDelay | read-only | current | This object indicates the real-time delay of a serial interface. |
| 1.3.6.1.4.1.2011.5.25.157.1.24 | NodehwLinkHeartbeat | |||
| 1.3.6.1.4.1.2011.5.25.157.1.24.1 | TablehwLinkHeartbeatFaultTable | not-accessible | current | Link-heartbeat alarm fault info table.The table that contains send packets interface and receive packets interface information currently operating on this devi… |
| 1.3.6.1.4.1.2011.5.25.157.1.24.1.1 | RowhwLinkHeartbeatFaultEntry | not-accessible | current | Link-heartbeat alarm fault info entry. |
| 1.3.6.1.4.1.2011.5.25.157.1.24.1.1.1 | ColumnhwLinkHeartbeatIfindex | read-only | current | The interface index. |
| 1.3.6.1.4.1.2011.5.25.157.1.24.1.1.2 | ColumnhwLinkHeartbeatIfName | read-only | current | The interface name. |
| 1.3.6.1.4.1.2011.5.25.157.1.24.1.1.3 | ColumnhwLinkHeartbeatTxInterface | read-only | current | The send physical interface name. |
| 1.3.6.1.4.1.2011.5.25.157.1.24.1.1.4 | ColumnhwLinkHeartbeatRxInterface | read-only | current | The receive physical interface name. |
| 1.3.6.1.4.1.2011.5.25.157.1.25 | NodehwPortTotalStatistics | |||
| 1.3.6.1.4.1.2011.5.25.157.1.25.1 | TablehwPortTotalStatTable | not-accessible | current | This table lists the port total statistics. |
| 1.3.6.1.4.1.2011.5.25.157.1.25.1.1 | RowhwPortTotalStatEntry | not-accessible | current | Indicates the port total statistics. |
| 1.3.6.1.4.1.2011.5.25.157.1.25.1.1.1 | ColumnhwPortTotalStatIfIndex | read-only | current | The index of this interface. |
| 1.3.6.1.4.1.2011.5.25.157.1.25.1.1.2 | ColumnhwPortTotalStatIfName | read-only | current | The name of this interface. |
| 1.3.6.1.4.1.2011.5.25.157.1.25.1.1.3 | ColumnhwPortTotalStatInPkts | read-only | current | Received total Pkts stat of this interface. |
| 1.3.6.1.4.1.2011.5.25.157.1.25.1.1.4 | ColumnhwPortTotalStatInOctets | read-only | current | Received total Octets stat of this interface. |
| 1.3.6.1.4.1.2011.5.25.157.1.25.1.1.5 | ColumnhwPortTotalStatInErrors | read-only | current | Received total error Pkts stat of this interface. |
| 1.3.6.1.4.1.2011.5.25.157.1.25.1.1.6 | ColumnhwPortTotalStatOutPkts | read-only | current | Send total Pkts stat of this interface. |
| 1.3.6.1.4.1.2011.5.25.157.1.25.1.1.7 | ColumnhwPortTotalStatOutOctets | read-only | current | Send total Octets stat of this interface. |
| 1.3.6.1.4.1.2011.5.25.157.1.25.1.1.8 | ColumnhwPortTotalStatOutErrors | read-only | current | Send total error Pkts stat of this interface. |
| 1.3.6.1.4.1.2011.5.25.157.1.26 | NodehwSubIfNumExceededSpecTrapObject | |||
| 1.3.6.1.4.1.2011.5.25.157.1.26.1 | ScalarhwSubIfSpecNum | accessible-for-notify | current | The number of sub interface spec. |
| 1.3.6.1.4.1.2011.5.25.157.1.27 | NodehwPortSpeedTrapObjects | |||
| 1.3.6.1.4.1.2011.5.25.157.1.27.1 | ScalarhwPhysicalPortCurSpeed | accessible-for-notify | current | The speed of port after change. |
| 1.3.6.1.4.1.2011.5.25.157.1.27.2 | ScalarhwPhysicalPortLastSpeed | accessible-for-notify | current | The speed of port before change. |
| 1.3.6.1.4.1.2011.5.25.157.2 | NodehwPortNotifications | |||
| 1.3.6.1.4.1.2011.5.25.157.2.1 | NotificationhwPortACRMasterPWChange | current | CES-ACR master PW change notification,indicates master pw change or master pw status change,this may happen when a pw is deleted or the pw status change. | |
| 1.3.6.1.4.1.2011.5.25.157.2.2 | NodehwDslImaGroupTraps | |||
| 1.3.6.1.4.1.2011.5.25.157.2.2.1 | NotificationhwDslImaGroupLEDown | current | The ima group local edge down notification. | |
| 1.3.6.1.4.1.2011.5.25.157.2.2.2 | NotificationhwDslImaGroupLEUp | current | The ima group local edge up notification. | |
| 1.3.6.1.4.1.2011.5.25.157.2.2.3 | NotificationhwDslImaGroupREDown | current | The ima group remote edge down notification. | |
| 1.3.6.1.4.1.2011.5.25.157.2.2.4 | NotificationhwDslImaGroupREUp | current | The ima group remote edge up notification. | |
| 1.3.6.1.4.1.2011.5.25.157.2.3 | NodehwDslImaLinkTraps | |||
| 1.3.6.1.4.1.2011.5.25.157.2.3.1 | NotificationhwDslImaLinkLif | current | The ima link lif notification. | |
| 1.3.6.1.4.1.2011.5.25.157.2.3.2 | NotificationhwDslImaLinkLifResume | current | The ima link lif resume notification. | |
| 1.3.6.1.4.1.2011.5.25.157.2.3.3 | NotificationhwDslImaLinkLods | current | The ima link lods notification. | |
| 1.3.6.1.4.1.2011.5.25.157.2.3.4 | NotificationhwDslImaLinkLodsResume | current | The ima link lods resume notification. | |
| 1.3.6.1.4.1.2011.5.25.157.2.3.5 | NotificationhwDslImaLinkRfi | current | The ima link rfi notification. | |
| 1.3.6.1.4.1.2011.5.25.157.2.3.6 | NotificationhwDslImaLinkRfiResume | current | The ima link rfi resume notification. | |
| 1.3.6.1.4.1.2011.5.25.157.2.3.7 | NotificationhwDslImaLinkReTxUnusable | current | The ima link remote tx unusable notification. | |
| 1.3.6.1.4.1.2011.5.25.157.2.3.8 | NotificationhwDslImaLinkReTxUsable | current | The ima link remote tx usable notification. | |
| 1.3.6.1.4.1.2011.5.25.157.2.3.9 | NotificationhwDslImaLinkReRxUnusable | current | The ima link remote rx unusable notification. | |
| 1.3.6.1.4.1.2011.5.25.157.2.3.10 | NotificationhwDslImaLinkReRxUsable | current | The ima link remote tx usable notification. | |
| 1.3.6.1.4.1.2011.5.25.157.2.4 | NodehwDslLinkTraps | |||
| 1.3.6.1.4.1.2011.5.25.157.2.4.1 | NotificationhwDslLinkFrameLost | current | The dsl link frame lost notification. | |
| 1.3.6.1.4.1.2011.5.25.157.2.4.2 | NotificationhwDslLinkFrameResume | current | The dsl link frame resume notification. | |
| 1.3.6.1.4.1.2011.5.25.157.2.4.3 | NotificationhwDslLinkSignalLost | current | The dsl link signal lost notification. | |
| 1.3.6.1.4.1.2011.5.25.157.2.4.4 | NotificationhwDslLinkSignalResume | current | The dsl link signal resume notification. | |
| 1.3.6.1.4.1.2011.5.25.157.2.5 | NotificationhwCesPwRemoteLosPktAlarm | current | Indicates the alarm is detected. | |
| 1.3.6.1.4.1.2011.5.25.157.2.6 | NotificationhwCesPwRemoteLosPktAlarmResume | current | Indicates the alarm is cleared. | |
| 1.3.6.1.4.1.2011.5.25.157.2.7 | NotificationhwCesPwOppositeRai | current | Indicates the alarm is detected. | |
| 1.3.6.1.4.1.2011.5.25.157.2.8 | NotificationhwCesPwOppositeRaiResume | current | Indicates the alarm is cleared. | |
| 1.3.6.1.4.1.2011.5.25.157.2.9 | NotificationhwLosAlarm | current | Indicates the alarm is detected. | |
| 1.3.6.1.4.1.2011.5.25.157.2.10 | NotificationhwLosAlarmResume | current | Indicates the alarm is cleared. | |
| 1.3.6.1.4.1.2011.5.25.157.2.11 | NotificationhwLofAlarm | current | Indicates the alarm is detected. | |
| 1.3.6.1.4.1.2011.5.25.157.2.12 | NotificationhwLofAlarmResume | current | Indicates the alarm is cleared. | |
| 1.3.6.1.4.1.2011.5.25.157.2.13 | NotificationhwOofAlarm | current | Indicates the alarm is detected. | |
| 1.3.6.1.4.1.2011.5.25.157.2.14 | NotificationhwOofAlarmResume | current | Indicates the alarm is cleared. | |
| 1.3.6.1.4.1.2011.5.25.157.2.15 | NotificationhwB1TcaAlarm | current | Indicates the alarm is detected. | |
| 1.3.6.1.4.1.2011.5.25.157.2.16 | NotificationhwB1TcaAlarmResume | current | Indicates the alarm is cleared. | |
| 1.3.6.1.4.1.2011.5.25.157.2.17 | NotificationhwB2TcaAlarm | current | Indicates the alarm is detected. | |
| 1.3.6.1.4.1.2011.5.25.157.2.18 | NotificationhwB2TcaAlarmResume | current | Indicates the alarm is cleared. | |
| 1.3.6.1.4.1.2011.5.25.157.2.19 | NotificationhwJ0TimAlarm | current | Indicates the alarm is detected. | |
| 1.3.6.1.4.1.2011.5.25.157.2.20 | NotificationhwJ0TimAlarmResume | current | Indicates the alarm is cleared. | |
| 1.3.6.1.4.1.2011.5.25.157.2.21 | NotificationhwLrdiAlarm | current | Indicates the alarm is detected. | |
| 1.3.6.1.4.1.2011.5.25.157.2.22 | NotificationhwLrdiAlarmResume | current | Indicates the alarm is cleared. | |
| 1.3.6.1.4.1.2011.5.25.157.2.23 | NotificationhwSfbereAlarm | current | Indicates the alarm is detected. | |
| 1.3.6.1.4.1.2011.5.25.157.2.24 | NotificationhwSfbereAlarmResume | current | Indicates the alarm is cleared. | |
| 1.3.6.1.4.1.2011.5.25.157.2.25 | NotificationhwAuLopAlarm | current | Indicates the alarm is detected. | |
| 1.3.6.1.4.1.2011.5.25.157.2.26 | NotificationhwAuLopAlarmResume | current | Indicates the alarm is cleared. | |
| 1.3.6.1.4.1.2011.5.25.157.2.27 | NotificationhwLaisAlarm | current | Indicates the alarm is detected. | |
| 1.3.6.1.4.1.2011.5.25.157.2.28 | NotificationhwLaisAlarmResume | current | Indicates the alarm is cleared. | |
| 1.3.6.1.4.1.2011.5.25.157.2.29 | NotificationhwSdbereAlarm | current | Indicates the alarm is detected. | |
| 1.3.6.1.4.1.2011.5.25.157.2.30 | NotificationhwSdbereAlarmResume | current | Indicates the alarm is cleared. | |
| 1.3.6.1.4.1.2011.5.25.157.2.31 | NotificationhwPtimAlarm | current | Indicates the alarm is detected. | |
| 1.3.6.1.4.1.2011.5.25.157.2.32 | NotificationhwPtimAlarmResume | current | Indicates the alarm is cleared. | |
| 1.3.6.1.4.1.2011.5.25.157.2.33 | NotificationhwPuneqAlarm | current | Indicates the alarm is detected. | |
| 1.3.6.1.4.1.2011.5.25.157.2.34 | NotificationhwPuneqAlarmResume | current | Indicates the alarm is cleared. | |
| 1.3.6.1.4.1.2011.5.25.157.2.35 | NotificationhwPrdiAlarm | current | Indicates the alarm is detected. | |
| 1.3.6.1.4.1.2011.5.25.157.2.36 | NotificationhwPrdiAlarmResume | current | Indicates the alarm is cleared. | |
| 1.3.6.1.4.1.2011.5.25.157.2.37 | NotificationhwB3TcaAlarm | current | Indicates the alarm is detected. | |
| 1.3.6.1.4.1.2011.5.25.157.2.38 | NotificationhwB3TcaAlarmResume | current | Indicates the alarm is cleared. | |
| 1.3.6.1.4.1.2011.5.25.157.2.39 | NotificationhwPplmAlarm | current | Indicates the alarm is detected. | |
| 1.3.6.1.4.1.2011.5.25.157.2.40 | NotificationhwPplmAlarmResume | current | Indicates the alarm is cleared. | |
| 1.3.6.1.4.1.2011.5.25.157.2.41 | NotificationhwPaisAlarm | current | Indicates the alarm is detected. | |
| 1.3.6.1.4.1.2011.5.25.157.2.42 | NotificationhwPaisAlarmResume | current | Indicates the alarm is cleared. | |
| 1.3.6.1.4.1.2011.5.25.157.2.43 | NotificationhwAuAisAlarm | current | Indicates the alarm is detected. | |
| 1.3.6.1.4.1.2011.5.25.157.2.44 | NotificationhwAuAisAlarmResume | current | Indicates the alarm is cleared. | |
| 1.3.6.1.4.1.2011.5.25.157.2.45 | NotificationhwVlopAlarm | current | Indicates the alarm is detected. | |
| 1.3.6.1.4.1.2011.5.25.157.2.46 | NotificationhwVlopAlarmResume | current | Indicates the alarm is cleared. | |
| 1.3.6.1.4.1.2011.5.25.157.2.47 | NotificationhwLomAlarm | current | Indicates the alarm is detected. | |
| 1.3.6.1.4.1.2011.5.25.157.2.48 | NotificationhwLomAlarmResume | current | Indicates the alarm is cleared. | |
| 1.3.6.1.4.1.2011.5.25.157.2.49 | NotificationhwLpTimVc12Alarm | current | Indicates the alarm is detected. | |
| 1.3.6.1.4.1.2011.5.25.157.2.50 | NotificationhwLpTimVc12AlarmResume | current | Indicates the alarm is cleared. | |
| 1.3.6.1.4.1.2011.5.25.157.2.51 | NotificationhwLpUneqVc12Alarm | current | Indicates the alarm is detected. | |
| 1.3.6.1.4.1.2011.5.25.157.2.52 | NotificationhwLpUneqVc12AlarmResume | current | Indicates the alarm is cleared. | |
| 1.3.6.1.4.1.2011.5.25.157.2.53 | NotificationhwVrdiAlarm | current | Indicates the alarm is detected. | |
| 1.3.6.1.4.1.2011.5.25.157.2.54 | NotificationhwVrdiAlarmResume | current | Indicates the alarm is cleared. | |
| 1.3.6.1.4.1.2011.5.25.157.2.57 | NotificationhwBip2TcaAlarm | current | Indicates the alarm is detected. | |
| 1.3.6.1.4.1.2011.5.25.157.2.58 | NotificationhwBip2TcaAlarmResume | current | Indicates the alarm is cleared. | |
| 1.3.6.1.4.1.2011.5.25.157.2.59 | NotificationhwLpSlmVc12Alarm | current | Indicates the alarm is detected. | |
| 1.3.6.1.4.1.2011.5.25.157.2.60 | NotificationhwLpSlmVc12AlarmResume | current | Indicates the alarm is cleared. | |
| 1.3.6.1.4.1.2011.5.25.157.2.61 | NotificationhwTuAisVc12Alarm | current | Indicates the alarm is detected. | |
| 1.3.6.1.4.1.2011.5.25.157.2.62 | NotificationhwTuAisVc12AlarmResume | current | Indicates the alarm is cleared. | |
| 1.3.6.1.4.1.2011.5.25.157.2.63 | NotificationhwE1EsTcaAlarm | current | Indicates the alarm is detected. | |
| 1.3.6.1.4.1.2011.5.25.157.2.64 | NotificationhwE1EsTcaAlarmResume | current | Indicates the alarm is cleared. | |
| 1.3.6.1.4.1.2011.5.25.157.2.67 | NotificationhwE1LmfaAlarm | current | Indicates the alarm is detected. | |
| 1.3.6.1.4.1.2011.5.25.157.2.68 | NotificationhwE1LmfaAlarmResume | current | Indicates the alarm is cleared. | |
| 1.3.6.1.4.1.2011.5.25.157.2.69 | NotificationhwE1UpE1AisAlarm | current | Indicates the alarm is detected. | |
| 1.3.6.1.4.1.2011.5.25.157.2.70 | NotificationhwE1UpE1AisAlarmResume | current | Indicates the alarm is cleared. | |
| 1.3.6.1.4.1.2011.5.25.157.2.71 | NotificationhwE1AlmE1RaiAlarm | current | Indicates the alarm is detected. | |
| 1.3.6.1.4.1.2011.5.25.157.2.72 | NotificationhwE1AlmE1RaiAlarmResume | current | Indicates the alarm is cleared. | |
| 1.3.6.1.4.1.2011.5.25.157.2.73 | NotificationhwCesPwOppositeAcFault | current | Indicates the alarm is detected. | |
| 1.3.6.1.4.1.2011.5.25.157.2.74 | NotificationhwCesPwOppositeAcFaultResume | current | Indicates the alarm is cleared. | |
| 1.3.6.1.4.1.2011.5.25.157.2.75 | NotificationhwCesLosPktExcAlarm | current | Indicates the alarm is detected. | |
| 1.3.6.1.4.1.2011.5.25.157.2.76 | NotificationhwCesLosPktExcAlarmResume | current | Indicates the alarm is cleared. | |
| 1.3.6.1.4.1.2011.5.25.157.2.77 | NotificationhwCesMisorderPktExcAlarm | current | Indicates the alarm is detected. | |
| 1.3.6.1.4.1.2011.5.25.157.2.78 | NotificationhwCesMisorderPktExcAlarmResume | current | Indicates the alarm is cleared. | |
| 1.3.6.1.4.1.2011.5.25.157.2.79 | NotificationhwCesStrayPktExcAlarm | current | Indicates the alarm is detected. | |
| 1.3.6.1.4.1.2011.5.25.157.2.80 | NotificationhwCesStrayPktExcAlarmResume | current | Indicates the alarm is cleared. | |
| 1.3.6.1.4.1.2011.5.25.157.2.81 | NotificationhwCesMalPktExcAlarm | current | Indicates the alarm is detected. | |
| 1.3.6.1.4.1.2011.5.25.157.2.82 | NotificationhwCesMalPktExcAlarmResume | current | Indicates the alarm is cleared. | |
| 1.3.6.1.4.1.2011.5.25.157.2.83 | NotificationhwCesJtrUdrExcAlarm | current | Indicates the alarm is detected. | |
| 1.3.6.1.4.1.2011.5.25.157.2.84 | NotificationhwCesJtrUdrExcAlarmResume | current | Indicates the alarm is cleared. | |
| 1.3.6.1.4.1.2011.5.25.157.2.85 | NotificationhwCesJtrOvrExcAlarm | current | Indicates the alarm is detected. | |
| 1.3.6.1.4.1.2011.5.25.157.2.86 | NotificationhwCesJtrOvrExcAlarmResume | current | Indicates the alarm is cleared. | |
| 1.3.6.1.4.1.2011.5.25.157.2.87 | NotificationhwRroolAlarm | current | Indicates the alarm is detected. | |
| 1.3.6.1.4.1.2011.5.25.157.2.88 | NotificationhwRroolAlarmResume | current | Indicates the alarm is cleared. | |
| 1.3.6.1.4.1.2011.5.25.157.2.89 | NotificationhwVrfiAlarm | current | Indicates the alarm is detected. | |
| 1.3.6.1.4.1.2011.5.25.157.2.90 | NotificationhwVrfiAlarmResume | current | Indicates the alarm is cleared. | |
| 1.3.6.1.4.1.2011.5.25.157.2.91 | NotificationhwV5VcaisAlarm | current | Indicates the alarm is detected. | |
| 1.3.6.1.4.1.2011.5.25.157.2.92 | NotificationhwV5VcaisAlarmResume | current | Indicates the alarm is cleared. | |
| 1.3.6.1.4.1.2011.5.25.157.2.95 | NotificationhwCposE1AlmE1RaiAlarm | current | Indicates the alarm is detected. | |
| 1.3.6.1.4.1.2011.5.25.157.2.96 | NotificationhwCposE1AlmE1RaiAlarmResume | current | Indicates the alarm is cleared. | |
| 1.3.6.1.4.1.2011.5.25.157.2.97 | NotificationhwCposE1LfaAlarm | current | Indicates the alarm is detected. | |
| 1.3.6.1.4.1.2011.5.25.157.2.98 | NotificationhwCposE1LfaAlarmResume | current | Indicates the alarm is cleared. | |
| 1.3.6.1.4.1.2011.5.25.157.2.99 | NotificationhwCposE1UpE1AisAlarm | current | Indicates the alarm is detected. | |
| 1.3.6.1.4.1.2011.5.25.157.2.100 | NotificationhwCposE1UpE1AisAlarmResume | current | Indicates the alarm is cleared. | |
| 1.3.6.1.4.1.2011.5.25.157.2.101 | NotificationhwCposE1DownE1AisAlarm | current | Indicates the alarm is detected. | |
| 1.3.6.1.4.1.2011.5.25.157.2.102 | NotificationhwCposE1DownE1AisAlarmResume | current | Indicates the alarm is cleared. | |
| 1.3.6.1.4.1.2011.5.25.157.2.103 | NotificationhwE1DownE1AisAlarm | current | Indicates the alarm is detected. | |
| 1.3.6.1.4.1.2011.5.25.157.2.104 | NotificationhwE1DownE1AisAlarmResume | current | Indicates the alarm is cleared. | |
| 1.3.6.1.4.1.2011.5.25.157.2.111 | NotificationhwCposE1LmfaAlarm | current | Indicates the alarm is detected. | |
| 1.3.6.1.4.1.2011.5.25.157.2.112 | NotificationhwCposE1LmfaAlarmResume | current | Indicates the alarm is cleared. | |
| 1.3.6.1.4.1.2011.5.25.157.2.113 | NotificationhwLaserShutAlarm | current | Indicates the alarm is detected. | |
| 1.3.6.1.4.1.2011.5.25.157.2.114 | NotificationhwLaserShutAlarmResume | current | Indicates the alarm is cleared. | |
| 1.3.6.1.4.1.2011.5.25.157.2.115 | NotificationhwLaserAutoShutAlarm | current | Indicates the alarm is detected. | |
| 1.3.6.1.4.1.2011.5.25.157.2.116 | NotificationhwLaserAutoShutAlarmResume | current | Indicates the alarm is cleared. | |
| 1.3.6.1.4.1.2011.5.25.157.2.117 | NotificationhwLoopbackAlarm | current | Indicates the alarm is detected. | |
| 1.3.6.1.4.1.2011.5.25.157.2.118 | NotificationhwLoopbackAlarmResume | current | Indicates the alarm is cleared. | |
| 1.3.6.1.4.1.2011.5.25.157.2.119 | NotificationhwOcdAlarm | current | Indicates the alarm is detected. | |
| 1.3.6.1.4.1.2011.5.25.157.2.120 | NotificationhwOcdAlarmResume | current | Indicates the alarm is cleared. | |
| 1.3.6.1.4.1.2011.5.25.157.2.121 | NotificationhwLcdAlarm | current | Indicates the alarm is detected. | |
| 1.3.6.1.4.1.2011.5.25.157.2.122 | NotificationhwLcdAlarmResume | current | Indicates the alarm is cleared. | |
| 1.3.6.1.4.1.2011.5.25.157.2.123 | NotificationhwUhcsAlarm | current | Indicates the alarm is detected. | |
| 1.3.6.1.4.1.2011.5.25.157.2.124 | NotificationhwUhcsAlarmResume | current | Indicates the alarm is cleared. | |
| 1.3.6.1.4.1.2011.5.25.157.2.125 | NotificationhwChcsAlarm | current | Indicates the alarm is detected. | |
| 1.3.6.1.4.1.2011.5.25.157.2.126 | NotificationhwChcsAlarmResume | current | Indicates the alarm is cleared. | |
| 1.3.6.1.4.1.2011.5.25.157.2.127 | NotificationhwChannelLoopbackAlarm | current | Indicates the alarm is detected. | |
| 1.3.6.1.4.1.2011.5.25.157.2.128 | NotificationhwChannelLoopbackAlarmResume | current | Indicates the alarm is cleared. | |
| 1.3.6.1.4.1.2011.5.25.157.2.129 | NotificationhwCesLopsAlarm | current | Indicates the alarm is detected. | |
| 1.3.6.1.4.1.2011.5.25.157.2.130 | NotificationhwCesLopsAlarmResume | current | Indicates the alarm is cleared. | |
| 1.3.6.1.4.1.2011.5.25.157.2.131 | NotificationhwAtmPwLosPktExcAlarm | current | Indicates the alarm is detected. | |
| 1.3.6.1.4.1.2011.5.25.157.2.132 | NotificationhwAtmPwLosPktExcAlarmResume | current | Indicates the alarm is cleared. | |
| 1.3.6.1.4.1.2011.5.25.157.2.133 | NotificationhwAtmPwMisorderPktExcAlarm | current | Indicates the alarm is detected. | |
| 1.3.6.1.4.1.2011.5.25.157.2.134 | NotificationhwAtmPwMisorderPktExcAlarmResume | current | Indicates the alarm is cleared. | |
| 1.3.6.1.4.1.2011.5.25.157.2.135 | NotificationhwAtmPwUnknownCellExcAlarm | current | Indicates the alarm is detected. | |
| 1.3.6.1.4.1.2011.5.25.157.2.136 | NotificationhwAtmPwUnknownCellExcAlarmResume | current | Indicates the alarm is cleared. | |
| 1.3.6.1.4.1.2011.5.25.157.2.153 | NotificationhwInputErrorAlarm | current | The port input errors notification. | |
| 1.3.6.1.4.1.2011.5.25.157.2.154 | NotificationhwInputErrorAlarmResume | current | The port input errors resume notification. | |
| 1.3.6.1.4.1.2011.5.25.157.2.155 | NotificationhwOutputErrorAlarm | current | The port output errors notification. | |
| 1.3.6.1.4.1.2011.5.25.157.2.156 | NotificationhwOutputErrorAlarmResume | current | The port output errors resume notification. | |
| 1.3.6.1.4.1.2011.5.25.157.2.157 | NodehwPortAlarmTraps | |||
| 1.3.6.1.4.1.2011.5.25.157.2.157.1 | NotificationhwPhysicalPortCrcError | current | Port Crc error alarm notification. | |
| 1.3.6.1.4.1.2011.5.25.157.2.157.2 | NotificationhwPhysicalPortCrcErrorResume | current | Port Crc error alarm resume. | |
| 1.3.6.1.4.1.2011.5.25.157.2.157.3 | NotificationhwPhysicalPortSymbolError | current | Port Symbol error alarm notification. | |
| 1.3.6.1.4.1.2011.5.25.157.2.157.4 | NotificationhwPhysicalPortSymbolErrorResume | current | Port Symbol error alarm resume. | |
| 1.3.6.1.4.1.2011.5.25.157.2.157.5 | NotificationhwPhysicalPortSdhError | current | Port Sdh error alarm notification. | |
| 1.3.6.1.4.1.2011.5.25.157.2.157.6 | NotificationhwPhysicalPortSdhErrorResume | current | Port Sdh error alarm resume. | |
| 1.3.6.1.4.1.2011.5.25.157.2.157.7 | NotificationhwPhysicalPortBip8SdError | current | Port BIP8 Signal Degrade alarm notification. | |
| 1.3.6.1.4.1.2011.5.25.157.2.157.8 | NotificationhwPhysicalPortBip8SdErrorResume | current | Port BIP8 Signal Degrade alarm resume. | |
| 1.3.6.1.4.1.2011.5.25.157.2.157.9 | NotificationhwPhysicalPortCrcPacketErrorRatio | current | Port CRC-PER(Packet Error Ratio) alarm notification. | |
| 1.3.6.1.4.1.2011.5.25.157.2.157.10 | NotificationhwPhysicalPortCrcPacketErrorRatioResume | current | Port CRC-PER(Packet Error Ratio) alarm resume notification. | |
| 1.3.6.1.4.1.2011.5.25.157.2.157.11 | NotificationhwPhysicalPortCrcSd | current | Port MAC_FCS_SD alarm notification. | |
| 1.3.6.1.4.1.2011.5.25.157.2.157.12 | NotificationhwPhysicalPortCrcSdResume | current | Port MAC_FCS_SD alarm resume. | |
| 1.3.6.1.4.1.2011.5.25.157.2.157.13 | NotificationhwPhysicalPortCrcExc | current | Port MAC_FCS_EXC alarm notification. | |
| 1.3.6.1.4.1.2011.5.25.157.2.157.14 | NotificationhwPhysicalPortCrcExcResume | current | Port MAC_FCS_EXC alarm resume notification. | |
| 1.3.6.1.4.1.2011.5.25.157.2.157.15 | NotificationhwPhysicalPortCrcPerWarning | current | Port CRC-PER(Packet Error Ratio) warning notification. | |
| 1.3.6.1.4.1.2011.5.25.157.2.157.16 | NotificationhwPhysicalPortCrcPerWarningResume | current | Port CRC-PER(Packet Error Ratio) warning resume notification. | |
| 1.3.6.1.4.1.2011.5.25.157.2.157.17 | NodehwPhysicalPortFlowSurge | |||
| 1.3.6.1.4.1.2011.5.25.157.2.157.17.1 | NotificationhwInputBroadcastSurgeOccur | current | Input broadcast surge occurred. | |
| 1.3.6.1.4.1.2011.5.25.157.2.157.17.2 | NotificationhwInputBroadcastSurgeResume | current | Input broadcast surge resumed. | |
| 1.3.6.1.4.1.2011.5.25.157.2.157.17.3 | NotificationhwOutputBroadcastSurgeOccur | current | Output broadcast surge occurred. | |
| 1.3.6.1.4.1.2011.5.25.157.2.157.17.4 | NotificationhwOutputBroadcastSurgeResume | current | Output broadcast surge resumed. | |
| 1.3.6.1.4.1.2011.5.25.157.2.157.18 | NotificationhwPortCrcRateExceed | current | Indicates that the rate of the incoming traffic packets with CRC error exceeds the alarm threshold. | |
| 1.3.6.1.4.1.2011.5.25.157.2.157.19 | NotificationhwPortErrorRateExceed | current | Indicates that the rate of the incoming traffic error packets exceeds the alarm threshold. | |
| 1.3.6.1.4.1.2011.5.25.157.2.157.20 | NotificationhwPhysicalPortInBroadcastRapidChange | current | Indicates that the rate of the input broadcast exceeds the threshold. | |
| 1.3.6.1.4.1.2011.5.25.157.2.160 | NotificationhwLoopBackAutoClearNotice | current | set port undo loopback while set loopback autoclear enable when time out. | |
| 1.3.6.1.4.1.2011.5.25.157.2.161 | NotificationhwChannelLoopBackAutoClearNotice | current | set channel undo loopback while set loopback autoclear enable when time out. | |
| 1.3.6.1.4.1.2011.5.25.157.2.162 | NotificationhwHpJ1TiuAlarm | current | Trace Identifier Unstable in the Higher order Path. | |
| 1.3.6.1.4.1.2011.5.25.157.2.163 | NotificationhwHpJ1TiuAlarmResume | current | Trace Identifier Unstable in the Higher order Path alarm resume. | |
| 1.3.6.1.4.1.2011.5.25.157.2.164 | NotificationhwPortAlarmInverseAutoRecover | current | Port alarm inverse auto recover. | |
| 1.3.6.1.4.1.2011.5.25.157.2.165 | NotificationhwB1ExcAlarm | current | Indicates the alarm is detected. | |
| 1.3.6.1.4.1.2011.5.25.157.2.166 | NotificationhwB1ExcAlarmResume | current | Indicates the alarm is cleared. | |
| 1.3.6.1.4.1.2011.5.25.157.2.167 | NotificationhwB3ExcAlarm | current | Indicates the alarm is detected. | |
| 1.3.6.1.4.1.2011.5.25.157.2.168 | NotificationhwB3ExcAlarmResume | current | Indicates the alarm is cleared. | |
| 1.3.6.1.4.1.2011.5.25.157.2.169 | NotificationhwBip2ExcAlarm | current | Indicates the alarm is detected. | |
| 1.3.6.1.4.1.2011.5.25.157.2.170 | NotificationhwBip2ExcAlarmResume | current | Indicates the alarm is cleared. | |
| 1.3.6.1.4.1.2011.5.25.157.2.171 | NotificationhwLicenseLimitAlarm | current | Indicates the alarm is detected. | |
| 1.3.6.1.4.1.2011.5.25.157.2.172 | NotificationhwLicenseLimitAlarmResume | current | Indicates the alarm is cleared. | |
| 1.3.6.1.4.1.2011.5.25.157.2.173 | NotificationhwOpticalModuleIsNotAuthorized | current | Optical Module is not Authorized alarm notification. | |
| 1.3.6.1.4.1.2011.5.25.157.2.174 | NotificationhwOpticalModuleIsNotAuthorizedResume | current | Optical Module is not Authorized alarm resume notification. | |
| 1.3.6.1.4.1.2011.5.25.157.2.175 | NotificationhwLocalFaultAlarm | current | The Local Fault alarm has occured. Local Fault indicates a fault detected on the receive data path between the remote and the local. | |
| 1.3.6.1.4.1.2011.5.25.157.2.176 | NotificationhwLocalFaultAlarmResume | current | The Local Fault alarm has resumed. | |
| 1.3.6.1.4.1.2011.5.25.157.2.177 | NotificationhwRemoteFaultAlarm | current | The Remote Fault alarm has occured. Remote Fault indicates a fault on the transmit path between the local and the remote. | |
| 1.3.6.1.4.1.2011.5.25.157.2.178 | NotificationhwRemoteFaultAlarmResume | current | The Remote Fault alarm has resumed. | |
| 1.3.6.1.4.1.2011.5.25.157.2.179 | NotificationhwCopperPolarityError | current | The copper polarity error alarm has occurred. Polarity errors have detected on receive twisted-pairs, please change a new one. | |
| 1.3.6.1.4.1.2011.5.25.157.2.180 | NotificationhwCopperPolarityErrorResume | current | The copper polarity error alarm has resumed. | |
| 1.3.6.1.4.1.2011.5.25.157.2.181 | NotificationhwLotuaisAlarm | current | Indicates the alarm is detected. | |
| 1.3.6.1.4.1.2011.5.25.157.2.182 | NotificationhwLotuaisAlarmResume | current | Indicates the alarm is cleared. | |
| 1.3.6.1.4.1.2011.5.25.157.2.183 | NotificationhwLotulomAlarm | current | Indicates the alarm is detected. | |
| 1.3.6.1.4.1.2011.5.25.157.2.184 | NotificationhwLotulomAlarmResume | current | Indicates the alarm is cleared. | |
| 1.3.6.1.4.1.2011.5.25.157.2.185 | NotificationhwLotusdberAlarm | current | Indicates the alarm is detected. | |
| 1.3.6.1.4.1.2011.5.25.157.2.186 | NotificationhwLotusdberAlarmResume | current | Indicates the alarm is cleared. | |
| 1.3.6.1.4.1.2011.5.25.157.2.187 | NotificationhwLotusfberAlarm | current | Indicates the alarm is detected. | |
| 1.3.6.1.4.1.2011.5.25.157.2.188 | NotificationhwLotusfberAlarmResume | current | Indicates the alarm is cleared. | |
| 1.3.6.1.4.1.2011.5.25.157.2.189 | NotificationhwLoduaisAlarm | current | Indicates the alarm is detected. | |
| 1.3.6.1.4.1.2011.5.25.157.2.190 | NotificationhwLoduaisAlarmResume | current | Indicates the alarm is cleared. | |
| 1.3.6.1.4.1.2011.5.25.157.2.191 | NotificationhwLodulckAlarm | current | Indicates the alarm is detected. | |
| 1.3.6.1.4.1.2011.5.25.157.2.192 | NotificationhwLodulckAlarmResume | current | Indicates the alarm is cleared. | |
| 1.3.6.1.4.1.2011.5.25.157.2.193 | NotificationhwLoduociAlarm | current | Indicates the alarm is detected. | |
| 1.3.6.1.4.1.2011.5.25.157.2.194 | NotificationhwLoduociAlarmResume | current | Indicates the alarm is cleared. | |
| 1.3.6.1.4.1.2011.5.25.157.2.195 | NotificationhwLpmbdiAlarm | current | Indicates the alarm is detected. | |
| 1.3.6.1.4.1.2011.5.25.157.2.196 | NotificationhwLpmbdiAlarmResume | current | Indicates the alarm is cleared. | |
| 1.3.6.1.4.1.2011.5.25.157.2.197 | NotificationhwLpmtimAlarm | current | Indicates the alarm is detected. | |
| 1.3.6.1.4.1.2011.5.25.157.2.198 | NotificationhwLpmtimAlarmResume | current | Indicates the alarm is cleared. | |
| 1.3.6.1.4.1.2011.5.25.157.2.199 | NotificationhwLsmbdiAlarm | current | Indicates the alarm is detected. | |
| 1.3.6.1.4.1.2011.5.25.157.2.200 | NotificationhwLsmbdiAlarmResume | current | Indicates the alarm is cleared. | |
| 1.3.6.1.4.1.2011.5.25.157.2.201 | NotificationhwLsmiaeAlarm | current | Indicates the alarm is detected. | |
| 1.3.6.1.4.1.2011.5.25.157.2.202 | NotificationhwLsmiaeAlarmResume | current | Indicates the alarm is cleared. | |
| 1.3.6.1.4.1.2011.5.25.157.2.203 | NotificationhwLsmtimAlarm | current | Indicates the alarm is detected. | |
| 1.3.6.1.4.1.2011.5.25.157.2.204 | NotificationhwLsmtimAlarmResume | current | Indicates the alarm is cleared. | |
| 1.3.6.1.4.1.2011.5.25.157.2.205 | NotificationhwNegotiationFailedAlarm | current | Auto-negotiation failure alarm. Possible causes, including the local auto-negotiation configuration with the peer inconsistencies; the local ability is not com… | |
| 1.3.6.1.4.1.2011.5.25.157.2.206 | NotificationhwNegotiationFailedAlarmResume | current | Auto-negotiation failure alarm resume. | |
| 1.3.6.1.4.1.2011.5.25.157.2.207 | NotificationhwEthHalfDuplex | current | The port works in the half-duplex mode. | |
| 1.3.6.1.4.1.2011.5.25.157.2.208 | NotificationhwEthFullDuplex | current | The half-duplex mode alarm resume. | |
| 1.3.6.1.4.1.2011.5.25.157.2.209 | NotificationhwPhysicalPortAutoDetectFail | current | Interface auto adapter fail alarm notification. | |
| 1.3.6.1.4.1.2011.5.25.157.2.210 | NotificationhwPhysicalPortAutoDetectSuccess | current | Interface auto adapter fail alarm resume notification. | |
| 1.3.6.1.4.1.2011.5.25.157.2.211 | NotificationhwNotSameBoardInTrunk | current | Not same boards in Eth-trunk. | |
| 1.3.6.1.4.1.2011.5.25.157.2.212 | NodehwOtnAlarm | |||
| 1.3.6.1.4.1.2011.5.25.157.2.212.1 | NotificationhwOtuLomAlarm | current | Indicates the alarm is detected. | |
| 1.3.6.1.4.1.2011.5.25.157.2.212.2 | NotificationhwOtuLomAlarmResume | current | Indicates the alarm is cleared. | |
| 1.3.6.1.4.1.2011.5.25.157.2.212.3 | NotificationhwOtuAisAlarm | current | Indicates the alarm is detected. | |
| 1.3.6.1.4.1.2011.5.25.157.2.212.4 | NotificationhwOtuAisAlarmResume | current | Indicates the alarm is cleared. | |
| 1.3.6.1.4.1.2011.5.25.157.2.212.5 | NotificationhwOtuSdAlarm | current | Indicates the alarm is detected. | |
| 1.3.6.1.4.1.2011.5.25.157.2.212.6 | NotificationhwOtuSdAlarmResume | current | Indicates the alarm is cleared. | |
| 1.3.6.1.4.1.2011.5.25.157.2.212.7 | NotificationhwOtuSfAlarm | current | Indicates the alarm is detected. | |
| 1.3.6.1.4.1.2011.5.25.157.2.212.8 | NotificationhwOtuSfAlarmResume | current | Indicates the alarm is cleared. | |
| 1.3.6.1.4.1.2011.5.25.157.2.212.9 | NotificationhwSmBdiAlarm | current | Indicates the alarm is detected. | |
| 1.3.6.1.4.1.2011.5.25.157.2.212.10 | NotificationhwSmBdiAlarmResume | current | Indicates the alarm is cleared. | |
| 1.3.6.1.4.1.2011.5.25.157.2.212.11 | NotificationhwSmIaeAlarm | current | Indicates the alarm is detected. | |
| 1.3.6.1.4.1.2011.5.25.157.2.212.12 | NotificationhwSmIaeAlarmResume | current | Indicates the alarm is cleared. | |
| 1.3.6.1.4.1.2011.5.25.157.2.212.13 | NotificationhwSmTimAlarm | current | Indicates the alarm is detected. | |
| 1.3.6.1.4.1.2011.5.25.157.2.212.14 | NotificationhwSmTimAlarmResume | current | Indicates the alarm is cleared. | |
| 1.3.6.1.4.1.2011.5.25.157.2.212.15 | NotificationhwOduAisAlarm | current | Indicates the alarm is detected. | |
| 1.3.6.1.4.1.2011.5.25.157.2.212.16 | NotificationhwOduAisAlarmResume | current | Indicates the alarm is cleared. | |
| 1.3.6.1.4.1.2011.5.25.157.2.212.17 | NotificationhwOduLokAlarm | current | Indicates the alarm is detected. | |
| 1.3.6.1.4.1.2011.5.25.157.2.212.18 | NotificationhwOduLokAlarmResume | current | Indicates the alarm is cleared. | |
| 1.3.6.1.4.1.2011.5.25.157.2.212.19 | NotificationhwOduOciAlarm | current | Indicates the alarm is detected. | |
| 1.3.6.1.4.1.2011.5.25.157.2.212.20 | NotificationhwOduOciAlarmResume | current | Indicates the alarm is cleared. | |
| 1.3.6.1.4.1.2011.5.25.157.2.212.21 | NotificationhwPmBdiAlarm | current | Indicates the alarm is detected. | |
| 1.3.6.1.4.1.2011.5.25.157.2.212.22 | NotificationhwPmBdiAlarmResume | current | Indicates the alarm is cleared. | |
| 1.3.6.1.4.1.2011.5.25.157.2.212.23 | NotificationhwPmTimAlarm | current | Indicates the alarm is detected. | |
| 1.3.6.1.4.1.2011.5.25.157.2.212.24 | NotificationhwPmTimAlarmResume | current | Indicates the alarm is cleared. | |
| 1.3.6.1.4.1.2011.5.25.157.2.212.25 | NotificationhwPrefecTcaAlarm | current | Indicates the alarm is detected. | |
| 1.3.6.1.4.1.2011.5.25.157.2.212.26 | NotificationhwPrefecTcaAlarmResume | current | Indicates the alarm is cleared. | |
| 1.3.6.1.4.1.2011.5.25.157.2.213 | NotificationhwE3UpE3AisAlarm | current | Indicates the alarm is detected. | |
| 1.3.6.1.4.1.2011.5.25.157.2.214 | NotificationhwE3UpE3AisAlarmResume | current | Indicates the alarm is cleared. | |
| 1.3.6.1.4.1.2011.5.25.157.2.215 | NotificationhwE3AlmE3RaiAlarm | current | Indicates the alarm is detected. | |
| 1.3.6.1.4.1.2011.5.25.157.2.216 | NotificationhwE3AlmE3RaiAlarmResume | current | Indicates the alarm is cleared. | |
| 1.3.6.1.4.1.2011.5.25.157.2.217 | NotificationhwMultiServiceOnOneCardAlarm | current | Multiple services be configured on the same chip of the card. | |
| 1.3.6.1.4.1.2011.5.25.157.2.218 | NotificationhwMultiServiceOnOneCardAlarmResume | current | There is no multiple services on the same chip of the card. | |
| 1.3.6.1.4.1.2011.5.25.157.2.219 | NotificationhwInputRateChangeOverThresholdNotice | current | The input rate change ratio exceeded the threshold. | |
| 1.3.6.1.4.1.2011.5.25.157.2.220 | NotificationhwOutputRateChangeOverThresholdNotice | current | The output rate change ratio exceeded the threshold. | |
| 1.3.6.1.4.1.2011.5.25.157.2.221 | NodehwNarrowBandTraps | |||
| 1.3.6.1.4.1.2011.5.25.157.2.221.1 | NotificationhwX50LofAlarm | current | X.50 sub-rate out of frame occurred. | |
| 1.3.6.1.4.1.2011.5.25.157.2.221.2 | NotificationhwX50LofAlarmResume | current | X.50 sub-rate out of frame was cleared. | |
| 1.3.6.1.4.1.2011.5.25.157.2.221.3 | NotificationhwX50AbitAlarm | current | X.50 deframing failed on the remote device. | |
| 1.3.6.1.4.1.2011.5.25.157.2.221.4 | NotificationhwX50AbitAlarmResume | current | The X.50 deframing failure was cleared on the remote device. | |
| 1.3.6.1.4.1.2011.5.25.157.2.222 | NotificationhwLinkHeartbeatDropAlarm | current | Link-heartbeat drop alarm. | |
| 1.3.6.1.4.1.2011.5.25.157.2.223 | NotificationhwLinkHeartbeatDropAlarmResume | current | Link-heartbeat drop alarm resume. | |
| 1.3.6.1.4.1.2011.5.25.157.2.224 | NotificationhwLinkHeartbeatChangeAlarm | current | Link-heartbeat change alarm. | |
| 1.3.6.1.4.1.2011.5.25.157.2.225 | NotificationhwLinkHeartbeatChangeAlarmResume | current | Link-heartbeat change alarm resume. | |
| 1.3.6.1.4.1.2011.5.25.157.2.226 | NotificationhwPortPhysicalRateDegradeAlarm | current | The physical rate degrade alarm. | |
| 1.3.6.1.4.1.2011.5.25.157.2.227 | NotificationhwPortPhysicalRateDegradeAlarmResume | current | The physical rate degrade alarm resume. | |
| 1.3.6.1.4.1.2011.5.25.157.2.228 | NotificationhwLicenseInactiveAlarm | current | The interface license was not activated. | |
| 1.3.6.1.4.1.2011.5.25.157.2.229 | NotificationhwLicenseInactiveAlarmResume | current | The interface license inactivation alarm was cleared. | |
| 1.3.6.1.4.1.2011.5.25.157.2.230 | NotificationhwLicenseResourceLackAlarm | current | Interfaces of this type in use exceeded the maximum number. | |
| 1.3.6.1.4.1.2011.5.25.157.2.231 | NotificationhwLicenseResourceLackAlarmResume | current | The maximum number-crossing alarm was cleared. | |
| 1.3.6.1.4.1.2011.5.25.157.2.232 | NotificationhwPortModeChangeTrap | current | Indicates the mode of a port is changed. | |
| 1.3.6.1.4.1.2011.5.25.157.2.233 | NotificationhwRdiAlarm | current | The peer end was faulty. | |
| 1.3.6.1.4.1.2011.5.25.157.2.234 | NotificationhwRdiAlarmResume | current | The peer end recovered from faults. | |
| 1.3.6.1.4.1.2011.5.25.157.2.235 | NotificationhwAisAlarm | current | Upstream signals were abnormal. | |
| 1.3.6.1.4.1.2011.5.25.157.2.236 | NotificationhwAisAlarmResume | current | Upstream signals recovered. | |
| 1.3.6.1.4.1.2011.5.25.157.2.237 | NotificationhwCollisionAlarm | current | The link encountered a collision. | |
| 1.3.6.1.4.1.2011.5.25.157.2.238 | NotificationhwCollisionAlarmResume | current | The link recovered from a collision. | |
| 1.3.6.1.4.1.2011.5.25.157.2.239 | NotificationhwSubIfNumExceededSpecAlarm | current | The nunber of sub interface exceeded spec alarm. | |
| 1.3.6.1.4.1.2011.5.25.157.2.240 | NotificationhwSubIfNumExceededSpecAlarmResume | current | The number of sub interface exceeded spec alarm resume. | |
| 1.3.6.1.4.1.2011.5.25.157.2.241 | NotificationhwPortSpeedChangeTrap | current | The speed of port is changed. | |
| 1.3.6.1.4.1.2011.5.25.157.2.242 | NotificationhwPortGroupTransModeDiff | current | This group of interfaces do not work in the same transmission mode. | |
| 1.3.6.1.4.1.2011.5.25.157.2.243 | NotificationhwPortGroupTransModeDiffResume | current | This group of interfaces work in the same transmission mode now. | |
| 1.3.6.1.4.1.2011.5.25.157.2.244 | NotificationhwImpedanceMismatch | current | The configured interface impedance value did not match that of the cable. | |
| 1.3.6.1.4.1.2011.5.25.157.2.245 | NotificationhwPicLcdAlarm | current | Loss of code group synchronization alarm is detected. | |
| 1.3.6.1.4.1.2011.5.25.157.2.246 | NotificationhwPicLcdAlarmResume | current | Loss of code group synchronization alarm is cleared. | |
| 1.3.6.1.4.1.2011.5.25.157.2.247 | NotificationhwBoardNotSupportAssignTrunk | current | The card does not support extensions of Eth-Trunk specifications. | |
| 1.3.6.1.4.1.2011.5.25.157.2.248 | NotificationhwPortProtectGroupUnavailable | current | The port protection group is unavailable. | |
| 1.3.6.1.4.1.2011.5.25.157.2.249 | NotificationhwPortProtectGroupAvailable | current | The port protection group is available. | |
| 1.3.6.1.4.1.2011.5.25.157.2.250 | NotificationhwPortProtectGroupDelete | current | The port protection group was deleted. | |
| 1.3.6.1.4.1.2011.5.25.157.2.251 | NotificationhwDelayOverConfig | current | Real-time E2E Delay Exceeded the Configured Delay. | |
| 1.3.6.1.4.1.2011.5.25.157.2.252 | NotificationhwDelayOverConfigResume | current | Alarm Indicating the Real-time E2E Delay Exceeded the Configured Delay Was Cleared. | |
| 1.3.6.1.4.1.2011.5.25.157.2.253 | NotificationhwAcBlockAlarm | current | AC interface blocking alarm. | |
| 1.3.6.1.4.1.2011.5.25.157.2.254 | NotificationhwAcBlockAlarmResume | current | AC interface blocking alarm clearing. | |
| 1.3.6.1.4.1.2011.5.25.157.2.255 | NotificationhwPortLicenseActFail | current | Failed to activate the port license. | |
| 1.3.6.1.4.1.2011.5.25.157.2.256 | NotificationhwPortLicenseActSuccess | current | Succeed to activate the port license. | |
| 1.3.6.1.4.1.2011.5.25.157.2.257 | NotificationhwCableSnrAbnormal | current | The network cable is of poor quality. | |
| 1.3.6.1.4.1.2011.5.25.157.2.258 | NotificationhwCableSnrNormal | current | The network cable is of good quality. | |
| 1.3.6.1.4.1.2011.5.25.157.2.259 | NotificationhwCableSnrDetectNotSupport | current | The network cable quality cannot be detected. | |
| 1.3.6.1.4.1.2011.5.25.157.11 | NodehwPortConformance | |||
| 1.3.6.1.4.1.2011.5.25.157.11.1 | NodehwPortCompliances | |||
| 1.3.6.1.4.1.2011.5.25.157.11.1.1 | CompliancehwPortCompliance | current | The compliance statement for systems supporting the HUAWEI-PORT-MIB. | |
| 1.3.6.1.4.1.2011.5.25.157.11.2 | NodehwPortGroups | |||
| 1.3.6.1.4.1.2011.5.25.157.11.2.1 | GrouphwEthernetObjectGroup | current | The Port attribute group. | |
| 1.3.6.1.4.1.2011.5.25.157.11.2.2 | GrouphwPosObjectGroup | current | The Port attribute group. | |
| 1.3.6.1.4.1.2011.5.25.157.11.2.3 | GrouphwCposObjectGroup | current | The Port attribute group. | |
| 1.3.6.1.4.1.2011.5.25.157.11.2.4 | GrouphwDs0ChannelBundleObjectGroup | current | The Port attribute group. | |
| 1.3.6.1.4.1.2011.5.25.157.11.2.5 | GrouphwDs1ObjectGroup | current | The Port attribute group. | |
| 1.3.6.1.4.1.2011.5.25.157.11.2.6 | GrouphwDs3ObjectGroup | current | The Port attribute group. | |
| 1.3.6.1.4.1.2011.5.25.157.11.2.7 | GrouphwBundleSerialObjectGroup | current | The Port attribute group. | |
| 1.3.6.1.4.1.2011.5.25.157.11.2.8 | GrouphwPortNotificationsGroup | current | This is the group of port notifiction. | |
| 1.3.6.1.4.1.2011.5.25.157.11.2.9 | GrouphwDslGroupObjectGroup | current | The dsl group attribute group. | |
| 1.3.6.1.4.1.2011.5.25.157.11.2.10 | GrouphwDslGroupImaObjectGroup | current | The dsl group ima attribute group. | |
| 1.3.6.1.4.1.2011.5.25.157.11.2.11 | GrouphwDslLinkObjectGroup | current | The dsl link attribute group. | |
| 1.3.6.1.4.1.2011.5.25.157.11.2.20 | GrouphwDslImaTrapGroup | current | The dsl Ima Trap group. | |
| 1.3.6.1.4.1.2011.5.25.157.11.2.21 | GrouphwDslLinkTrapGroup | current | The dsl Link Trap group. | |
| 1.3.6.1.4.1.2011.5.25.157.11.2.22 | GrouphwPortAlarmThresholdObjectGroup | current | The port alarm threshold group. | |
| 1.3.6.1.4.1.2011.5.25.157.11.2.23 | GrouphwPortAlarmDownEnableObjectGroup | current | The port alarm down enable group. | |
| 1.3.6.1.4.1.2011.5.25.157.11.2.24 | GrouphwLogicalPortObjectGroup | current | The Port attribute group. | |
| 1.3.6.1.4.1.2011.5.25.157.11.2.25 | GrouphwPortAlarmTrapGroup | current | The port alarm trap group. | |
| 1.3.6.1.4.1.2011.5.25.157.11.2.26 | GrouphwPortPhysicalObjectGroup | current | The port physical object group. | |
| 1.3.6.1.4.1.2011.5.25.157.11.2.27 | GrouphwPortProtectObjectGroup | current | A collection of objects providing port protect group status information. | |
| 1.3.6.1.4.1.2011.5.25.157.11.2.28 | GrouphwPortDescriptinonObjectGroup | current | The port description object group | |
| 1.3.6.1.4.1.2011.5.25.157.11.2.29 | GrouphwOtnAlarmNotificationsGroup | current | This is the group of OTN port notifications. | |
| 1.3.6.1.4.1.2011.5.25.157.11.2.30 | GrouphwLinkHeartbeatObjectGroup | current | The link-heartbeat object group. | |
| 1.3.6.1.4.1.2011.5.25.157.11.2.31 | GrouphwPortTotalStatObjectGroup | current | The port total stat object group. | |
| 1.3.6.1.4.1.2011.5.25.157.11.2.32 | GrouphwPortSpeedTrapObjectsGroup | current | The port speed change trap object group |