HUAWEI-PROTECTION-MIB
137 objects
This mib is used for defining the IPMB Aiu Proctect MIB objects of the protection group and smart link monitor group.
Imported Objects
| HUAWEI-DEVICE-MIB | hwFrameIndex hwSlotIndex |
| HUAWEI-MIB | huaweiUtility |
| IF-MIB | ifIndex |
| SNMPv2-CONF | MODULE-COMPLIANCE NOTIFICATION-GROUP OBJECT-GROUP |
| SNMPv2-SMI | Integer32 IpAddress MODULE-IDENTITY NOTIFICATION-TYPE OBJECT-TYPE Unsigned32 |
| SNMPv2-TC | DateAndTime MacAddress RowStatus TEXTUAL-CONVENTION |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.2011.6.50 | IdentityhwProtection | of | This mib is used for defining the IPMB Aiu Proctect MIB objects of the protection group and smart link monitor group. | |
| 1.3.6.1.4.1.2011.6.50.1 | TablehwProtectionTable | not-accessible | current | Port protection table.This table is use to record the indices, workMode and other infomation of the two ports which is in protection group. ifIndex is the inde… |
| 1.3.6.1.4.1.2011.6.50.1.1 | RowhwProtectionEntry | not-accessible | current | Port protection table.This table is use to record the indices, workMode and other infomation of the two ports which is in protection group. ifIndex is the inde… |
| 1.3.6.1.4.1.2011.6.50.1.1.1 | ColumnhwPgType | read-create | current | Port protection type. Options: 1.e1(1) - indicates that the port protection type is e1 2.atmapm(2) - indicates that the port protection type is atmapm 3.atmaiu… |
| 1.3.6.1.4.1.2011.6.50.1.1.2 | ColumnhwPgCurrentWorkEntity | read-only | current | Whether the current board or port is the working or the protecting one. Options: 1. work(1) - indicates that the port is working 2. protect(2) - indicates that… |
| 1.3.6.1.4.1.2011.6.50.1.1.3 | ColumnhwPgProtectIfIndex | read-create | current | Index of the protecting board (the specified port number is 0). |
| 1.3.6.1.4.1.2011.6.50.1.1.4 | ColumnhwPgMngtEnable | read-create | current | Enables or disables the protection function. Options: 1. enable(1) - indicates that the port protection function is enabled 2. disable(2) - indicates that the … |
| 1.3.6.1.4.1.2011.6.50.1.1.5 | ColumnhwPgMngtAdminStatus | read-create | current | Protection operation. Options: 1. switch(1) - Forced switchover |
| 1.3.6.1.4.1.2011.6.50.1.1.6 | ColumnhwPgWorkMode | read-create | current | Working mode of the protection group. Options: 1.uniformRoute(1) - working mode of the protection group is uniform route 2.diverseRoute(2) - working mode of th… |
| 1.3.6.1.4.1.2011.6.50.1.1.7 | ColumnhwPgRowStatus | read-create | current | Protection operation (4: Add; 6: Delete). Options: 1. Add(4) - add protection group 2. Delete(6) - delete protection group |
| 1.3.6.1.4.1.2011.6.50.1.1.8 | ColumnhwPgWeight | read-create | current | Protection group weight. |
| 1.3.6.1.4.1.2011.6.50.1.1.9 | ColumnhwPgStandbyOnTime | read-create | current | Open time of standby port when checking port status of the standby board. Unit: ms The time equals to the returnd value multiply by 10. |
| 1.3.6.1.4.1.2011.6.50.1.1.10 | ColumnhwPgHoldTime | read-create | current | The delay-time of checking protection group. Unit: ms The time equals to the returnd value multiply by 10. |
| 1.3.6.1.4.1.2011.6.50.1.1.11 | ColumnhwPgPriority | read-create | current | Group-protect Priority. Options: 1.low(1) - indicates that the priority of the protection group is low 2.middle(2) - indicates that the priority of the protect… |
| 1.3.6.1.4.1.2011.6.50.2 | TablehwProtectionAbilityTable | not-accessible | current | This table is no longer used. The indexes of this table are hwFrameIndex and hwSlotIndex. |
| 1.3.6.1.4.1.2011.6.50.2.1 | RowhwProtectionAbilityEntry | not-accessible | current | This table is no longer used. The indexes of this entry are hwFrameIndex and hwSlotIndex. |
| 1.3.6.1.4.1.2011.6.50.2.1.1 | ColumnhwPgAbilityType | read-only | current | Protection type.This object is no longer used. Options: 1.e1(1) - indicates that the protection type is e1 2.atmapm(2) - indicates that the protection type is … |
| 1.3.6.1.4.1.2011.6.50.2.1.2 | ColumnhwPgOtherFrame | read-only | current | ID of the shelf where protection group 2 is located. This object is no longer used. |
| 1.3.6.1.4.1.2011.6.50.2.1.3 | ColumnhwPgOtherSlot | read-only | current | ID of the slot where protection group 2 is located. This object is no longer used. |
| 1.3.6.1.4.1.2011.6.50.3 | TablehwGauPortProtectTable | not-accessible | current | Gau port config protective group.The index of this table is hwGauFirstPortIfIndex. |
| 1.3.6.1.4.1.2011.6.50.3.1 | RowhwGauPortProtectEntry | not-accessible | current | Gau port config protective group.The index of this entry is hwGauFirstPortIfIndex. |
| 1.3.6.1.4.1.2011.6.50.3.1.1 | ColumnhwGauFirstPortIfIndex | read-create | current | Gau first port ifindex. |
| 1.3.6.1.4.1.2011.6.50.3.1.2 | ColumnhwGauSecondPortIfIndex | read-create | current | Gau Second port ifindex. |
| 1.3.6.1.4.1.2011.6.50.3.1.3 | ColumnhwGauPortrotectRowStatus | read-create | current | Config protective group rowstauts. |
| 1.3.6.1.4.1.2011.6.50.3.1.4 | ColumnhwGauPortCurrentActiveIfIndex | read-only | current | Current active port ifindex. |
| 1.3.6.1.4.1.2011.6.50.4 | ScalarhwPgCheckFrequency | read-write | current | protection group check frequency. |
| 1.3.6.1.4.1.2011.6.50.5 | TablehwPsGroupTable | not-accessible | current | Group table. The objects in hwPsGroupTable are used for performing operations associated with the protection group. The operations include creating and deletin… |
| 1.3.6.1.4.1.2011.6.50.5.1 | RowhwPsGroupEntry | not-accessible | current | Group table. The objects in hwPsGroupTable are used for performing operations associated with the protection group. The operations include creating and deletin… |
| 1.3.6.1.4.1.2011.6.50.5.1.1 | ColumnhwPgGroupId | accessible-for-notify | current | Protection group ID. |
| 1.3.6.1.4.1.2011.6.50.5.1.2 | ColumnhwPgGroupWorkMode | read-create | current | Group workmode. Options: 1. timedelay(1) -ETH delay mode. 2. portstate(2) -ETH state mode. 3. smartlink(3) -SMART LINK active/standby mode. 4. unidirection(4) … |
| 1.3.6.1.4.1.2011.6.50.5.1.3 | ColumnhwPgGroupReversionTime | read-create | current | Group reversion time. Range: 1-1440 Default: 720 Unit: second |
| 1.3.6.1.4.1.2011.6.50.5.1.4 | ColumnhwPgGroupReversion | read-create | current | Group reversion operation. Options: 1. enable(1) -indicates that the protection group switchover recovery function is enabled 2. disable(2) -indicates that the… |
| 1.3.6.1.4.1.2011.6.50.5.1.5 | ColumnhwPgGroupFreeze | read-create | current | Group freeze operation. Options: 1. freeze(1) -Frozen state 2. undofreeze(2) -Unfrozen state |
| 1.3.6.1.4.1.2011.6.50.5.1.6 | ColumnhwPgGroupAdmin | read-create | current | Group admin operation. Options: 1. enable(1) -The protection group is enabled 2. disable(2) -The protection group is disabled |
| 1.3.6.1.4.1.2011.6.50.5.1.7 | ColumnhwPgGroupDesc | read-create | current | Group description. All characters must between 0x20 and 0x7E, and can not be question mark. Double quotation mark can not be the first or last character. Blank… |
| 1.3.6.1.4.1.2011.6.50.5.1.9 | ColumnhwPgGroupProtectTarget | read-create | current | Group protect target. Options: 1. asmainboard(1) -Active main board and standby main board. 2. asmainboardport(2) -Port of active main board and standby main b… |
| 1.3.6.1.4.1.2011.6.50.5.1.10 | ColumnhwPgGroupRowStatus | read-create | current | Group rowstatus. Options: 1. createAndGo(4) -create a new instance of a conceptual row 2. destroy(6) -delete the instances associated with an existing conceptu… |
| 1.3.6.1.4.1.2011.6.50.6 | TablehwPsMemberTable | not-accessible | current | Member table. The objects in hwPsMemberTable are used for performing operations associated with the protection group member. The operations include adding and … |
| 1.3.6.1.4.1.2011.6.50.6.1 | RowhwPsMemberEntry | not-accessible | current | Member table. The objects in hwPsMemberTable are used for performing operations associated with the protection group member. The operations include adding and … |
| 1.3.6.1.4.1.2011.6.50.6.1.1 | ColumnhwPgMemberRole | read-create | current | Member role. Options: 1. work(1) -Working member 2. protect(2) -Protection member |
| 1.3.6.1.4.1.2011.6.50.6.1.2 | ColumnhwPgMemberOper | read-write | current | Member operation. Options: 1. manualswitch(1) -manual-switch The manual switchover can be performed only when the protection group is enabled, no member is loc… |
| 1.3.6.1.4.1.2011.6.50.6.1.3 | ColumnhwPgMemberStatus | read-only | current | Member status. Options: 1. null(1) -Null operation 2. manualswitchsrc(2) -Source member of the manual switchover 3. manualswitchdst(3) -Target member of the ma… |
| 1.3.6.1.4.1.2011.6.50.6.1.4 | ColumnhwPgDstMember | read-write | current | Target member ifindex.Reading this object will result in implementation-specific results. |
| 1.3.6.1.4.1.2011.6.50.6.1.5 | ColumnhwPgMemberRunningState | read-only | current | Member status. Options: 1. active(1) -State of the member that carries the service 2. standby(2) -State of the member that does not carry the service 3. adding… |
| 1.3.6.1.4.1.2011.6.50.6.1.6 | ColumnhwPgMemberPeerMember | read-only | current | Peer member ifindex. |
| 1.3.6.1.4.1.2011.6.50.6.1.8 | ColumnhwPgMemberRowStatus | read-create | current | Member rowstatus. Options: 1. createAndGo(4) -create a new instance of a conceptual row 2. destroy(6) -delete the instances associated with an existing concept… |
| 1.3.6.1.4.1.2011.6.50.7 | TablehwPsGroupExtTable | not-accessible | current | Protect extended Group table.The index of this table is hwPgGroupId. This table is used to config private parameter of protection group. |
| 1.3.6.1.4.1.2011.6.50.7.1 | RowhwPsGroupExtEntry | not-accessible | current | Protect extended Group table.The index of this entry is hwPgGroupId. This table is used to config private parameter of protection group. |
| 1.3.6.1.4.1.2011.6.50.7.1.1 | ColumnhwPsGroupFlushSendCtrlVlan | read-create | current | Control VLAN ID of flush packet which to send. -1 means set VLAN ID to useless value. |
| 1.3.6.1.4.1.2011.6.50.7.1.2 | ColumnhwPsGroupFlushSendPassword | read-create | current | Password of flush packet which to send. Blank string means set password to useless value. All characters must between 0x20 and 0x7E, and can not be question ma… |
| 1.3.6.1.4.1.2011.6.50.7.1.3 | ColumnhwPsGroupLoadBalanceState | read-only | current | Load balance state of smart link protect group. Options: 1. allonwork(1) - Load balance state of smart link protect group is allonwork 2. allonprotect(2) - Loa… |
| 1.3.6.1.4.1.2011.6.50.7.1.4 | ColumnhwPsGroupPppoeSingleMac | read-create | current | group pppoe single-mac operation. Options: 1.bind(1) - The operation is bound 2.unbind(2) - The operation is unbound 3.invalid(-1) - The operation is invalid |
| 1.3.6.1.4.1.2011.6.50.7.1.5 | ColumnhwPsGroupAntiJitterTime | read-create | current | Set anti-jitter time gpon or epon protect-group. The allowable value is from 1 to 1440 seconds. The invalid value is -1. Defaut value is 720 seconds. |
| 1.3.6.1.4.1.2011.6.50.7.1.6 | ColumnhwPgGroupAssociatedUpLinkBfd | read-write | current | This indicates the name of the BFD session which will be bound/unbound. |
| 1.3.6.1.4.1.2011.6.50.7.1.7 | ColumnhwPgGroupAssociatedUpLinkPort | read-write | current | ETH port member ifindex which will be bound/unbound. |
| 1.3.6.1.4.1.2011.6.50.7.1.8 | ColumnhwPgGroupAssociatedUpLinkStatus | read-only | current | group uplink monitor status. Options: 1.binddown(1) - uplink status is down 2.bindup(2) - uplink status is up 3.unbind(3) - unbound uplink monitor 4.invalid(-1… |
| 1.3.6.1.4.1.2011.6.50.7.1.9 | ColumnhwPsGroupStandardTypeB | read-write | current | This object indicates whether the GPON uni port protect-group is standard Type B. Options: 1. yes(1) - Standard Type B 2. no(2) - Nonstandard Type B 3. invalid… |
| 1.3.6.1.4.1.2011.6.50.7.1.10 | ColumnhwPgGroupAssociatedUpLinkMdIndex | read-write | current | This object indicates the MD index which will be bound/unbound. hwPgGroupAssociatedUpLinkMdIndex, hwPgGroupAssociatedUpLinkMaIndex and hwPgGroupAssociatedUpLin… |
| 1.3.6.1.4.1.2011.6.50.7.1.11 | ColumnhwPgGroupAssociatedUpLinkMaIndex | read-write | current | This object indicates the MA index which will be bound/unbound. hwPgGroupAssociatedUpLinkMdIndex, hwPgGroupAssociatedUpLinkMaIndex and hwPgGroupAssociatedUpLin… |
| 1.3.6.1.4.1.2011.6.50.7.1.12 | ColumnhwPgGroupAssociatedUpLinkMepIndex | read-write | current | This object indicates the MEP index which will be bound/unbound. hwPgGroupAssociatedUpLinkMdIndex, hwPgGroupAssociatedUpLinkMaIndex and hwPgGroupAssociatedUpLi… |
| 1.3.6.1.4.1.2011.6.50.7.1.13 | ColumnhwPsGroupDpPeerNodeName | read-write | current | This object indicates the peer node name of Type B dual parenting protect group. The empty string indicates that the peer node name is deleted. |
| 1.3.6.1.4.1.2011.6.50.7.1.14 | ColumnhwPsGroupDpPeerFrameSlotPort | read-write | current | This object indicates the peer node frameid, slotid and portid of Type B dual parenting protect group. Format: frameid(2bytes) + slotid(1bytes) + portid(1bytes… |
| 1.3.6.1.4.1.2011.6.50.7.1.15 | ColumnhwPsGroupDpHandshakeStatus | read-only | current | This object indicates the handshake status between the local member and peer member of dual parenting protect group. Options: 1. normal(1) - Indicates that the… |
| 1.3.6.1.4.1.2011.6.50.7.1.16 | ColumnhwPsGroupStandbyDetectSwitch | read-write | current | Function of detecting the forced mode of the standby port in the timedelay protection group for active and standby control boards. Options: 1. enable(1) - Indi… |
| 1.3.6.1.4.1.2011.6.50.8 | TablehwPsGroupLoadBalanceTable | not-accessible | current | Protect group load balance configuration table. The indexes of this table are hwPgGroupId and hwPsGroupLoadBalanceInstance. |
| 1.3.6.1.4.1.2011.6.50.8.1 | RowhwPsGroupLoadBalanceEntry | not-accessible | current | Protect group load balance configuration table. The indexes of this entry are hwPgGroupId and hwPsGroupLoadBalanceInstance. |
| 1.3.6.1.4.1.2011.6.50.8.1.1 | ColumnhwPsGroupLoadBalanceInstance | not-accessible | current | Instance ID. From 0 to the max instance ID. The max intance ID is different for products. |
| 1.3.6.1.4.1.2011.6.50.8.1.2 | ColumnhwPsGroupLoadBalanceRole | read-write | current | Load balance configuration of instance in each protect group. Default value is on-work. Options: 1. onwork(1) -forward through work member on load-balance stat… |
| 1.3.6.1.4.1.2011.6.50.9 | TablehwSmartLinkFlushRecvPortTable | not-accessible | current | Describes the configuration information for receiving the flush packet. The index of this table is ifIndex. |
| 1.3.6.1.4.1.2011.6.50.9.1 | RowhwSmartLinkFlushRecvPortEntry | not-accessible | current | Describes the configuration information for receiving the flush packet. The index of this entry is ifIndex. |
| 1.3.6.1.4.1.2011.6.50.9.1.1 | ColumnhwSmartLinkFlushRecvCtrlVlan | read-write | current | Indicates the control VLAN of the received flush packet. Range: -1, 1-4093 -1 indicates deleting the control VLAN. |
| 1.3.6.1.4.1.2011.6.50.9.1.2 | ColumnhwSmartLinkFlushRecvPassword | read-write | current | Indicates the authentication password of the received flush packet. When the value of this leaf is a null character string, it indicates that no password authe… |
| 1.3.6.1.4.1.2011.6.50.10 | NodehwSmartLinkFlushRecvStatistics | |||
| 1.3.6.1.4.1.2011.6.50.10.1 | ScalarhwSmartLinkFlushRecvLastIfIndex | read-only | current | Indicates the index of the last port that receives the flush packet. Its calculation is the same as that of ifIndex. -1 indicates invalid value. |
| 1.3.6.1.4.1.2011.6.50.10.2 | ScalarhwSmartLinkFlushRecvLastTime | read-only | current | Indicates the last time when the flush packet is received. The value format of this leaf is an 8-byte hexadecimal number. Among the eight bytes, the first and … |
| 1.3.6.1.4.1.2011.6.50.10.3 | ScalarhwSmartLinkFlushRecvLastSrcMacAddr | read-only | current | Indicates the last source MAC address that receives the flush packet. |
| 1.3.6.1.4.1.2011.6.50.10.4 | ScalarhwSmartLinkFlushRecvLastCtrlVlan | read-only | current | Indicates the last control VLAN that receives the flush packet. Range: -1, 1-4093 -1 indicates invalid value. |
| 1.3.6.1.4.1.2011.6.50.11 | TablehwMonitorLinkGroupTable | not-accessible | current | Used for configuring a monitor link group. The index of this table is hwMonitorLinkGroupId. |
| 1.3.6.1.4.1.2011.6.50.11.1 | RowhwMonitorLinkGroupEntry | not-accessible | current | Used for configuring a monitor link group. The index of this entry is hwMonitorLinkGroupId. |
| 1.3.6.1.4.1.2011.6.50.11.1.1 | ColumnhwMonitorLinkGroupId | accessible-for-notify | current | Indicates the index of the monitored group. |
| 1.3.6.1.4.1.2011.6.50.11.1.2 | ColumnhwMonitorLinkGroupRecoverTime | read-create | current | Indicates the recovery time of the monitored group. Range: 3-60 Default: 3 Unit: second |
| 1.3.6.1.4.1.2011.6.50.11.1.3 | ColumnhwMonitorLinkGroupState | read-only | current | Indicates the status of the monitored group. Options: 1. idle(1) -the status of a monitored group is idle 2. normal(2) -the status of a monitored group is norm… |
| 1.3.6.1.4.1.2011.6.50.11.1.10 | ColumnhwMonitorLinkGroupRowStatus | read-create | current | Indicates the row status, used for creating or deleting a monitored group. createAndGo(4) and destroy(6) are supported. During the query operation, active(1) i… |
| 1.3.6.1.4.1.2011.6.50.12 | TablehwMonitorLinkUpLinkTable | not-accessible | current | Used for configuring a monitor up link port. The index of this table is hwMonitorLinkUpLinkIfIndex. |
| 1.3.6.1.4.1.2011.6.50.12.1 | RowhwMonitorLinkUpLinkEntry | not-accessible | current | Used for configuring a monitor up link port. The index of this entry is hwMonitorLinkUpLinkIfIndex. |
| 1.3.6.1.4.1.2011.6.50.12.1.1 | ColumnhwMonitorLinkUpLinkIfIndex | read-write | current | Indicates the index of the upstream port of the monitored group. Its calculation is the same as that of ifIndex. When the value of this leaf is -1, it indicate… |
| 1.3.6.1.4.1.2011.6.50.12.1.2 | ColumnhwMonitorLinkUpLinkStatus | read-only | current | Indicates the status of the upstream port of the monitored group. Options: 1. linkUp(1) -the status of the upstream port of the monitored group is link up 2. l… |
| 1.3.6.1.4.1.2011.6.50.12.1.3 | ColumnhwMonitorLinkUpLinkUpTime | read-only | current | Indicates the last time when the upstream port of the monitored groups is up. The value format of this leaf is an 8-byte hexadecimal number. Among the eight by… |
| 1.3.6.1.4.1.2011.6.50.12.1.4 | ColumnhwMonitorLinkUpLinkDownTime | read-only | current | Indicates the last time when the upstream port of the monitored groups is down. The value format of this leaf is an 8-byte hexadecimal number. Among the eight … |
| 1.3.6.1.4.1.2011.6.50.13 | TablehwMonitorLinkDownLinkTable | not-accessible | current | Used for configuring a monitor down link port. The indexes of this table are hwMonitorLinkGroupId and hwMonitorLinkDownLinkIfIndex. |
| 1.3.6.1.4.1.2011.6.50.13.1 | RowhwMonitorLinkDownLinkEntry | not-accessible | current | Used for configuring a monitor down link port. The indexes of this entry are hwMonitorLinkGroupId and hwMonitorLinkDownLinkIfIndex. |
| 1.3.6.1.4.1.2011.6.50.13.1.1 | ColumnhwMonitorLinkDownLinkId | not-accessible | current | Indicates the index of the downlink of the monitored group. Range: 0-15 |
| 1.3.6.1.4.1.2011.6.50.13.1.2 | ColumnhwMonitorLinkDownLinkIfIndex | read-create | current | Indicates the index of the downstream port of the monitored group. |
| 1.3.6.1.4.1.2011.6.50.13.1.3 | ColumnhwMonitorLinkDownLinkStatus | read-only | current | Indicates the status of the downstream port of the monitored group. Options: 1. linkUp(1) -the status of the downstream port of the monitored group is link up … |
| 1.3.6.1.4.1.2011.6.50.13.1.4 | ColumnhwMonitorLinkDownLinkUpTime | read-only | current | Indicates the last time when the downstream port of the monitored groups is up. The value format of this leaf is an 8-byte hexadecimal number. Among the eight … |
| 1.3.6.1.4.1.2011.6.50.13.1.5 | ColumnhwMonitorLinkDownLinkDownTime | read-only | current | Indicates the last time when the downstream port of the monitored groups is down. The value format of this leaf is an 8-byte hexadecimal number. Among the eigh… |
| 1.3.6.1.4.1.2011.6.50.13.1.10 | ColumnhwMonitorLinkDownRowStatus | read-create | current | Indicates the row status, used for creating or deleting a monitored downlink. createAndGo(4) and destroy(6) are supported. During the query operation, active(1… |
| 1.3.6.1.4.1.2011.6.50.14 | TablehwPsOntMemberTable | not-accessible | current | Member table for ONT. The objects in hwPsOntMemberTable are used for performing operations associated with the ONT protection group member. The operations incl… |
| 1.3.6.1.4.1.2011.6.50.14.1 | RowhwPsOntMemberEntry | not-accessible | current | Member table for ONT. The objects in hwPsOntMemberTable are used for performing operations associated with the ONT protection group member. The operations incl… |
| 1.3.6.1.4.1.2011.6.50.14.1.1 | ColumnhwPgOntId | not-accessible | current | Ont ID. |
| 1.3.6.1.4.1.2011.6.50.14.1.2 | ColumnhwPgOntMemberRole | read-create | current | Member role. Options: 1. work(1) -Working member 2. protect(2) -Protection member |
| 1.3.6.1.4.1.2011.6.50.14.1.3 | ColumnhwPgOntMemberOper | read-write | current | Member operation: Options: 1. manualswitch(1) -manual-switch The manual switchover can be performed only when the protection group is enabled, no member is loc… |
| 1.3.6.1.4.1.2011.6.50.14.1.4 | ColumnhwPgOntMemberStatus | read-only | current | Member status. Options: 1. null(1) -Null operation 2. manualswitchsrc(2) -Source member of the manual switchover 3. manualswitchdst(3) -Target member of the ma… |
| 1.3.6.1.4.1.2011.6.50.14.1.5 | ColumnhwPgOntDstMemberPort | read-write | current | Target member ifindex. Reading this object will result in implementation-specific results. |
| 1.3.6.1.4.1.2011.6.50.14.1.6 | ColumnhwPgOntDstMemberOnt | read-write | current | Target member ontId. Reading this object will result in implementation-specific results. |
| 1.3.6.1.4.1.2011.6.50.14.1.7 | ColumnhwPgOntMemberRunningState | read-only | current | Member status. Options: 1. active(1) -State of the member that carries the service 2. standby(2) -State of the member that does not carry the service 3. adding… |
| 1.3.6.1.4.1.2011.6.50.14.1.8 | ColumnhwPgOntMemberPeerMemberPort | read-only | current | Peer member ifindex. |
| 1.3.6.1.4.1.2011.6.50.14.1.9 | ColumnhwPgOntMemberPeerMemberOnt | read-only | current | Peer member ontId. |
| 1.3.6.1.4.1.2011.6.50.14.1.11 | ColumnhwPgOntMemberRowStatus | read-create | current | Member rowstatus. Options: 1. createAndGo(4) -create a new instance of a conceptual row 2. destroy(6) -delete the instances associated with an existing concept… |
| 1.3.6.1.4.1.2011.6.50.15 | NodehwPgGroupTraps | |||
| 1.3.6.1.4.1.2011.6.50.15.1 | NodehwPgGroupCommonTraps | |||
| 1.3.6.1.4.1.2011.6.50.15.1.0 | NodehwPgGroupCommonTrapsPrefix | |||
| 1.3.6.1.4.1.2011.6.50.15.1.0.1 | NotificationhwPgGroupLoadBalanceStateChangeTrap | current | This trap is generated when Load balance state of smart link protect group changes. | |
| 1.3.6.1.4.1.2011.6.50.16 | NodehwProtectionTraps | |||
| 1.3.6.1.4.1.2011.6.50.16.1 | NodehwProtectionCommonTraps | |||
| 1.3.6.1.4.1.2011.6.50.16.1.0 | NodehwProtectionCommonTrapsPrefix | |||
| 1.3.6.1.4.1.2011.6.50.16.1.0.1 | NotificationhwProtectionSwitchTrap | current | The agent generates this trap when a protect group switchs over. | |
| 1.3.6.1.4.1.2011.6.50.16.2 | NodehwProtectionAlarmTraps | |||
| 1.3.6.1.4.1.2011.6.50.16.2.0 | NodehwProtectionAlarmTrapsPrefix | |||
| 1.3.6.1.4.1.2011.6.50.16.2.0.1 | NotificationhwProtectionSwitchAlarmTrap | current | The agent generates this trap when a protect group switchs over. | |
| 1.3.6.1.4.1.2011.6.50.17 | NodehwSmartLinkTraps | |||
| 1.3.6.1.4.1.2011.6.50.17.1 | NodehwSmartLinkCommonTraps | |||
| 1.3.6.1.4.1.2011.6.50.17.1.0 | NodehwSmartLinkCommonTrapsPrefix | |||
| 1.3.6.1.4.1.2011.6.50.17.1.0.1 | NotificationhwMoniterGroupStateChangeTrap | current | This trap is generated when the state of moniter link group changes. | |
| 1.3.6.1.4.1.2011.6.50.18 | NodehwPsDpGlobalConfig | |||
| 1.3.6.1.4.1.2011.6.50.18.1 | ScalarhwPsDpSyncSwitch | read-write | current | The synchronous switch of dual-parenting. Options: 1. enable(1) - Indicates that the dual parenting synchronous switch is enable. 2. disable(2) - Indicates tha… |
| 1.3.6.1.4.1.2011.6.50.18.2 | ScalarhwPsDpLocalNodeIpAddress | read-write | current | This object indicates the IP address of dual parenting local node. The IP address can not be multicast IP 224.0.0.0-239.255.255.255. The IP address 255.255.255… |
| 1.3.6.1.4.1.2011.6.50.18.3 | ScalarhwPsDpLocalNodeTcpPort | read-write | current | This object indicates the TCP port ID of dual parenting local node. Range: 1024-49151 Default: 6076 |
| 1.3.6.1.4.1.2011.6.50.18.4 | ScalarhwPsDpLocalNodeCommunicationKey | read-write | current | This object indicates the communication key of dual parenting local node. |
| 1.3.6.1.4.1.2011.6.50.19 | TablehwPsDpPeerNodeTable | not-accessible | current | This table is used to configure the information about the dual parenting peer node. The index of this table is hwPsDpPeerNodeNameIndex. |
| 1.3.6.1.4.1.2011.6.50.19.1 | RowhwPsDpPeerNodeEntry | not-accessible | current | This table is used to configure the information about the dual parenting peer node. The index of this entry is hwPsDpPeerNodeNameIndex. |
| 1.3.6.1.4.1.2011.6.50.19.1.1 | ColumnhwPsDpPeerNodeNameIndex | not-accessible | current | This object indicates the dual parenting peer node name. |
| 1.3.6.1.4.1.2011.6.50.19.1.2 | ColumnhwPsDpPeerNodeIpAddress | read-write | current | This object indicates the IP address of dual parenting peer node. The IP address can not be multicast IP 224.0.0.0-239.255.255.255 or broadcast IP 255.255.255.… |
| 1.3.6.1.4.1.2011.6.50.19.1.3 | ColumnhwPsDpPeerNodeTcpPort | read-write | current | This object indicates the TCP port ID of dual parenting peer node. Range: 1024-49151 |
| 1.3.6.1.4.1.2011.6.50.19.1.4 | ColumnhwPsDpPeerNodeCommunicationKey | read-write | current | This object indicates the communication key of dual parenting peer node. |
| 1.3.6.1.4.1.2011.6.50.19.1.5 | ColumnhwPsDpPeerNodeConnectStatus | read-only | current | This object indicates the connect status between the dual parenting local node and peer node. Options: 1. normal(1) - Indicates that the connect status is norm… |
| 1.3.6.1.4.1.2011.6.50.19.1.6 | ColumnhwPsDpPeerNodeRowStatus | read-create | current | The hwPsDpPeerNodeRowStatus is used to create a new row or to modify or delete an existing row in this table. Options: 1. createAndGo(4) -create a new instance… |