HUAWEI-QINQ-MIB
187 objects
The QinQ MIB module is defined to manage the configuration under system or interface view.
Imported Objects
| HUAWEI-L2IF-MIB | VlanList |
| HUAWEI-MIB | hwDatacomm |
| IF-MIB | InterfaceIndex |
| P-BRIDGE-MIB | EnabledStatus |
| Q-BRIDGE-MIB | VlanId |
| SNMPv2-CONF | OBJECT-GROUP |
| SNMPv2-SMI | Counter64 Integer32 IpAddress MODULE-IDENTITY OBJECT-IDENTITY OBJECT-TYPE |
| SNMPv2-TC | MacAddress RowStatus |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.2011.5.25.116 | IdentityhwQinQ | The QinQ MIB module is defined to manage the configuration under system or interface view. | ||
| 1.3.6.1.4.1.2011.5.25.116.1 | NodehwQinQSystemBase | |||
| 1.3.6.1.4.1.2011.5.25.116.1.1 | ScalarhwQinQSystemWellKnowMac | read-write | current | The destination MAC address that is replaced the original destination macAddress is a wellknown multicast macAddress to hide the inner details of the BPDU in o… |
| 1.3.6.1.4.1.2011.5.25.116.1.2 | ScalarhwQinQSystemBridgeRole | read-write | current | It indicates the Bridge 's location, having two possible values :Customers' Bridge and Providers' Bridge. |
| 1.3.6.1.4.1.2011.5.25.116.1.3 | ScalarhwBpduSystemDropPacketSta | read-write | current | View statistics about the discarded BPDUs. |
| 1.3.6.1.4.1.2011.5.25.116.2 | NodehwQinQMngObjects | |||
| 1.3.6.1.4.1.2011.5.25.116.2.1 | TablehwQinQBpduTunnelTable | not-accessible | current | QinQ-port configuration table. |
| 1.3.6.1.4.1.2011.5.25.116.2.1.1 | RowhwQinQBpduTunnelEntry | not-accessible | current | The entry of an interface enabled the QinQ function. |
| 1.3.6.1.4.1.2011.5.25.116.2.1.1.1 | ColumnhwQinQBpduTunnelIndex | not-accessible | current | Index number of the interface. |
| 1.3.6.1.4.1.2011.5.25.116.2.1.1.2 | ColumnhwQinQEtherEncpsType | read-write | current | The value of tag type is encapsulated in the head of the Ethernet frame To distinguish the encapsulated mode between the 802.1Q and QinQ. |
| 1.3.6.1.4.1.2011.5.25.116.2.1.1.3 | ColumnhwQinQBpduTunnelEnableOneQBpduTunnel | read-write | current | The value indicates whether the 1Q-bpdutunnel is opened, If hwQinQBpduTunnelEnableTwoQBpduTunnel is enabling, then this value should be disable. |
| 1.3.6.1.4.1.2011.5.25.116.2.1.1.4 | ColumnhwQinQBpduTunnelEnableBpduTag | read-only | current | Whether to enable the setting of BPDU Tunnel tag. |
| 1.3.6.1.4.1.2011.5.25.116.2.1.1.5 | ColumnhwQinQBpduTunnelEnableTwoQBpduTunnel | read-only | current | The value indicates whether the 2Q-bpdutunnel is opened, If hwQinQBpduTunnelEnableOneQBpduTunnel is enabling, then this value should be disable. |
| 1.3.6.1.4.1.2011.5.25.116.2.1.1.6 | ColumnhwQinQBpduTunnelCustomerBpduTag | read-write | current | The tag is inserted into the head of the BPDU ,to support that can be transmitted through the services' network. |
| 1.3.6.1.4.1.2011.5.25.116.2.1.1.7 | ColumnhwQinQBpduTunnelCustomerBpduTagListLow | read-write | current | The list describes accessible bode from different vlan (0 to 2047). |
| 1.3.6.1.4.1.2011.5.25.116.2.1.1.8 | ColumnhwQinQBpduTunnelCustomerBpduTagListHigh | read-write | current | The list describes accessible bpdu from different vlan (2048 to 4094). |
| 1.3.6.1.4.1.2011.5.25.116.2.1.1.9 | ColumnhwQinQRemarkOuterTpid | read-write | current | The value indicates the TPID of outer tag of packets that have two tag and output from the output interface of vlan-switch, If hwQinQEtherEncpsType is enabling… |
| 1.3.6.1.4.1.2011.5.25.116.2.1.1.10 | ColumnhwQinQBpduTunnelEnableBpduFilter | read-write | current | The value indicates whether the BPDU filter function is enabled. If hwQinQBpduTunnelEnableBpduFilter is enabled, then this value should be enable. |
| 1.3.6.1.4.1.2011.5.25.116.2.2 | TablehwQinQSubIfVlanStackingTable | not-accessible | current | Used to configure packets'vlan stacking in sub interface, receive one-tag packets and transmit two-tag packets, where the outer-tag inserted is in hwQinQSubIfV… |
| 1.3.6.1.4.1.2011.5.25.116.2.2.1 | RowhwQinQSubIfVlanStackingEntry | not-accessible | current | The entry of an interface enabled the QinQ-stacking function. |
| 1.3.6.1.4.1.2011.5.25.116.2.2.1.1 | ColumnhwQinQSubIfStackingIfIndex | not-accessible | current | Index number of the QinQ-stacking interface. |
| 1.3.6.1.4.1.2011.5.25.116.2.2.1.2 | ColumnhwQinQSubIfStackingCEVlanStart | not-accessible | current | When configure ce vlan as a range, hwQinQSubIfStackingCEVlanStart is the start vlan id and hwQinQSubIfStackingCEVlanEnd is the end vlan id. |
| 1.3.6.1.4.1.2011.5.25.116.2.2.1.3 | ColumnhwQinQSubIfStackingCEVlanEnd | read-create | current | When configure ce vlan as a range, hwQinQSubIfStackingCEVlanStart is the start vlan id and hwQinQSubIfStackingCEVlanEnd is the end vlan id. |
| 1.3.6.1.4.1.2011.5.25.116.2.2.1.4 | ColumnhwQinQSubIfStackGroupId | read-create | current | Group-management id. |
| 1.3.6.1.4.1.2011.5.25.116.2.2.1.5 | ColumnhwQinQSubIfStackingRowStatus | read-create | current | Used for controlling the creation and deletion of this row. All writable objects in this row may be modified at any time. If a Network Management Application a… |
| 1.3.6.1.4.1.2011.5.25.116.2.2.1.6 | ColumnhwQinQSubIfStackingPEVlan | read-create | current | PE vlan id. |
| 1.3.6.1.4.1.2011.5.25.116.2.3 | TablehwQinQSubIfStackingStatTable | not-accessible | current | When a sub interface configured QinQ-stacking function, hwQinQSubIfStackingStatTable is used to statistic total number of the out packets and in packets. |
| 1.3.6.1.4.1.2011.5.25.116.2.3.1 | RowhwQinQSubIfStackingStatEntry | not-accessible | current | The entry of an interface enabled the QinQ-stacking function. |
| 1.3.6.1.4.1.2011.5.25.116.2.3.1.1 | ColumnhwQinQSubIfStackingStatIfIndex | not-accessible | current | Index number of the QinQ-stacking interface. |
| 1.3.6.1.4.1.2011.5.25.116.2.3.1.2 | ColumnhwQinQSubIfStackingStatCEVlan | not-accessible | current | Inner vlan in packets which input the QinQ sub interface, used to indicate the packets as an index. |
| 1.3.6.1.4.1.2011.5.25.116.2.3.1.3 | ColumnhwQinQSubIfStackStatGroupId | read-only | current | The group-management id. The statistic number of packets can not get if the statistic funtion is not enabled. |
| 1.3.6.1.4.1.2011.5.25.116.2.3.1.4 | ColumnhwQinQSubIfStackingStatOutPackets | read-only | current | Total number of out packets of the sub interface. |
| 1.3.6.1.4.1.2011.5.25.116.2.3.1.5 | ColumnhwQinQSubIfStackingStatOutBytes | read-only | current | Total number of out bytes of the sub interface. |
| 1.3.6.1.4.1.2011.5.25.116.2.3.1.6 | ColumnhwQinQSubIfStackingStatInPackets | read-only | current | Total number of in packets of the sub interface. |
| 1.3.6.1.4.1.2011.5.25.116.2.3.1.7 | ColumnhwQinQSubIfStackingStatInBytes | read-only | current | Total number of in bytes of the sub interface. |
| 1.3.6.1.4.1.2011.5.25.116.2.3.1.8 | ColumnhwQinQSubIfStackStatOutBdPackets | read-only | current | Total number of broadcast packets transmitted out of the sub interface. |
| 1.3.6.1.4.1.2011.5.25.116.2.3.1.9 | ColumnhwQinQSubIfStackStatInBdPackets | read-only | current | Total number of broadcast packets received from the sub interface. |
| 1.3.6.1.4.1.2011.5.25.116.2.3.1.10 | ColumnhwQinQSubIfStackStatOutMuPackets | read-only | current | Total number of multicast packets transmitted out of the sub interface. |
| 1.3.6.1.4.1.2011.5.25.116.2.3.1.11 | ColumnhwQinQSubIfStackStatInMuPackets | read-only | current | Total number of multicast packets received from the sub interface. |
| 1.3.6.1.4.1.2011.5.25.116.2.3.1.12 | ColumnhwQinQSubIfStackStatOutUniPackets | read-only | current | Total number of unicast packets transmitted out of the sub interface. |
| 1.3.6.1.4.1.2011.5.25.116.2.3.1.13 | ColumnhwQinQSubIfStackStatInUniPackets | read-only | current | Total number of unicast packets received from the sub interface. |
| 1.3.6.1.4.1.2011.5.25.116.2.4 | TablehwQinQSubIfTermTable | not-accessible | current | The table is used to configure QinQ-termination function in sub interface, then packets transmitted from this sub interface input with two tags will be termina… |
| 1.3.6.1.4.1.2011.5.25.116.2.4.1 | RowhwQinQSubIfTermEntry | not-accessible | current | The entry of an interface enabled the QinQ-termination function. |
| 1.3.6.1.4.1.2011.5.25.116.2.4.1.1 | ColumnhwQinQSubIfTermIfIndex | not-accessible | current | Index number of the QinQ-termination interface. |
| 1.3.6.1.4.1.2011.5.25.116.2.4.1.2 | ColumnhwQinQSubIfTermPEVlan | not-accessible | current | Outer vlan id of the packets which have two tags before being terminated. |
| 1.3.6.1.4.1.2011.5.25.116.2.4.1.3 | ColumnhwQinQSubIfTermCEVlanStart | not-accessible | current | When configure ce vlan as a range, hwQinQSubIfTermCEVlanStart is the start vlan id and hwQinQSubIfTermCEVlanEnd is the end vlan id. |
| 1.3.6.1.4.1.2011.5.25.116.2.4.1.4 | ColumnhwQinQSubIfTermCEVlanEnd | read-create | current | When configure ce vlan as a range, hwQinQSubIfTermCEVlanStart is the start vlan id and hwQinQSubIfTermCEVlanEnd is the end vlan id. |
| 1.3.6.1.4.1.2011.5.25.116.2.4.1.5 | ColumnhwQinQSubIfTermGroupId | read-create | current | Group-management id. |
| 1.3.6.1.4.1.2011.5.25.116.2.4.1.6 | ColumnhwQinQSubIfTermRowStatus | read-create | current | Used for controlling the creation and deletion of this row. All writeable objects in this row may be modified at any time. If a Network Management Application … |
| 1.3.6.1.4.1.2011.5.25.116.2.4.1.7 | ColumnhwQinQSubIfTermSubscriberGroupName | read-create | current | Name of Subscriber Group. |
| 1.3.6.1.4.1.2011.5.25.116.2.5 | TablehwQinQSubIfTermStatTable | not-accessible | current | When a sub interface configured QinQ-termination function, hwQinQSubIfTermStatTable used to statistic total number of the out packets and in packets. |
| 1.3.6.1.4.1.2011.5.25.116.2.5.1 | RowhwQinQSubIfTermStatEntry | not-accessible | current | The entry of an interface enabled the QinQ-termination function. |
| 1.3.6.1.4.1.2011.5.25.116.2.5.1.1 | ColumnhwQinQSubIfTermStatIfIndex | not-accessible | current | Index number of the QinQ-termination interface. |
| 1.3.6.1.4.1.2011.5.25.116.2.5.1.2 | ColumnhwQinQSubIfTermStatPEVlan | not-accessible | current | Outer vlan in packets which input the QinQ sub interface, used to indicate the packets as an index. |
| 1.3.6.1.4.1.2011.5.25.116.2.5.1.3 | ColumnhwQinQSubIfTermStatCEVlan | not-accessible | current | Inner vlan in packets which input the QinQ sub interface, used to indicate the packets as an index. |
| 1.3.6.1.4.1.2011.5.25.116.2.5.1.4 | ColumnhwQinQSubIfTermStatGroupId | read-only | current | The group-management id. The statistic number of packets can not get if the statistic funtion is not enabled. |
| 1.3.6.1.4.1.2011.5.25.116.2.5.1.5 | ColumnhwQinQSubIfTermStatOutPackets | read-only | current | Total number of out packets of the sub interface. |
| 1.3.6.1.4.1.2011.5.25.116.2.5.1.6 | ColumnhwQinQSubIfTermStatOutBytes | read-only | current | Total number of out bytes of the sub interface. |
| 1.3.6.1.4.1.2011.5.25.116.2.5.1.7 | ColumnhwQinQSubIfTermStatInPackets | read-only | current | Total number of in packets of the sub interface. |
| 1.3.6.1.4.1.2011.5.25.116.2.5.1.8 | ColumnhwQinQSubIfTermStatInBytes | read-only | current | Total number of in bytes of the sub interface. |
| 1.3.6.1.4.1.2011.5.25.116.2.5.1.9 | ColumnhwQinQSubIfTermStatOutBdPackets | read-only | current | Total number of broadcast packets transmitted out of the sub interface. |
| 1.3.6.1.4.1.2011.5.25.116.2.5.1.10 | ColumnhwQinQSubIfTermStatInBdPackets | read-only | current | Total number of broadcast packets received from the sub interface. |
| 1.3.6.1.4.1.2011.5.25.116.2.5.1.11 | ColumnhwQinQSubIfTermStatOutMuPackets | read-only | current | Total number of multicast packets transmitted out of the sub interface. |
| 1.3.6.1.4.1.2011.5.25.116.2.5.1.12 | ColumnhwQinQSubIfTermStatInMuPackets | read-only | current | Total number of multicast packets received from the sub interface. |
| 1.3.6.1.4.1.2011.5.25.116.2.5.1.13 | ColumnhwQinQSubIfTermStatOutUniPackets | read-only | current | Total number of unicast packets transmitted out of the sub interface. |
| 1.3.6.1.4.1.2011.5.25.116.2.5.1.14 | ColumnhwQinQSubIfTermStatInUniPackets | read-only | current | Total number of unicast packets received from the sub interface. |
| 1.3.6.1.4.1.2011.5.25.116.2.6 | TablehwQinQStaticARPCfgTable | not-accessible | current | The table is used to configure QinQ static ARP. |
| 1.3.6.1.4.1.2011.5.25.116.2.6.1 | RowhwQinQStaticARPCfgEntry | not-accessible | current | The entry of an interface enabled the QinQ function. |
| 1.3.6.1.4.1.2011.5.25.116.2.6.1.1 | ColumnhwQinQStaticARPCfgIfIndex | not-accessible | current | The interface's Index. |
| 1.3.6.1.4.1.2011.5.25.116.2.6.1.2 | ColumnhwQinQStaticARPCfgIp | not-accessible | current | The IP address. |
| 1.3.6.1.4.1.2011.5.25.116.2.6.1.3 | ColumnhwQinQStaticARPCfgMac | read-create | current | The MAC address. |
| 1.3.6.1.4.1.2011.5.25.116.2.6.1.4 | ColumnhwQinQStaticARPCfgVlan | read-create | current | The first vlan id. |
| 1.3.6.1.4.1.2011.5.25.116.2.6.1.5 | ColumnhwQinQStaticARPCfgCEVlan | read-create | current | The second vlan id. |
| 1.3.6.1.4.1.2011.5.25.116.2.6.1.6 | ColumnhwQinQStaticARPCfgRowStatus | read-create | current | Used for controlling the creation and deletion of this row. All writeable objects in this row may be modified at any time. If a Network Management Application … |
| 1.3.6.1.4.1.2011.5.25.116.2.7 | TablehwQinQStaticMACCfgTable | not-accessible | current | The table is used to configure static MAC. |
| 1.3.6.1.4.1.2011.5.25.116.2.7.1 | RowhwQinQStaticMACCfgEntry | not-accessible | current | The entry of an interface enabled the QinQ function. |
| 1.3.6.1.4.1.2011.5.25.116.2.7.1.1 | ColumnhwQinQStaticMACCfgMac | not-accessible | current | The MAC address. |
| 1.3.6.1.4.1.2011.5.25.116.2.7.1.2 | ColumnhwQinQStaticMACCfgVlan | not-accessible | current | Vlan id that the MAC address belongs to. |
| 1.3.6.1.4.1.2011.5.25.116.2.7.1.3 | ColumnhwQinQStaticMACCfgVsiName | not-accessible | current | Name of VSI that the MAC address belongs to. |
| 1.3.6.1.4.1.2011.5.25.116.2.7.1.4 | ColumnhwQinQStaticMACCfgPEVlan | read-create | current | PE vlan id for a Network Management Application attempts to configure hwQinQStaticMACCfgTable. |
| 1.3.6.1.4.1.2011.5.25.116.2.7.1.5 | ColumnhwQinQStaticMACCfgCEVlan | read-create | current | CE vlan id. |
| 1.3.6.1.4.1.2011.5.25.116.2.7.1.6 | ColumnhwQinQStaticMACCfgType | read-create | current | The type of the MAC. |
| 1.3.6.1.4.1.2011.5.25.116.2.7.1.7 | ColumnhwQinQStaticMACCfgIfIndex | read-create | current | Index number of the interface. |
| 1.3.6.1.4.1.2011.5.25.116.2.7.1.8 | ColumnhwQinQStaticMACCfgFlag | read-create | current | The config type. |
| 1.3.6.1.4.1.2011.5.25.116.2.7.1.9 | ColumnhwQinQStaticMACCfgRowStatus | read-create | current | Used for controlling the creation and deletion of this row. All writeable objects in this row may be modified at any time. If a Network Management Application … |
| 1.3.6.1.4.1.2011.5.25.116.2.8 | TablehwQinQSubIfDot1qTermTable | not-accessible | current | Used to configure Dot1q-termination function in sub interface ,then packets transmitted from this sub interface input with one tag will be terminated. |
| 1.3.6.1.4.1.2011.5.25.116.2.8.1 | RowhwQinQSubIfDot1qTermEntry | not-accessible | current | The entry of an interface enabled the Dot1q-termination function. |
| 1.3.6.1.4.1.2011.5.25.116.2.8.1.1 | ColumnhwQinQSubIfDot1qTermIfIndex | not-accessible | current | Index number of the Dot1q-termination interface. |
| 1.3.6.1.4.1.2011.5.25.116.2.8.1.2 | ColumnhwQinQSubIfDot1qTermVidStart | not-accessible | current | When configure ce vlan as a range, hwQinQSubIfDot1qTermCEVlanStart is the start vlan id and hwQinQSubIfDot1qTermCEVlanEnd is the end vlan id. |
| 1.3.6.1.4.1.2011.5.25.116.2.8.1.3 | ColumnhwQinQSubIfDot1qTermVidEnd | read-create | current | When configure ce vlan as a range, hwQinQSubIfDot1qTermCEVlanStart is the start vlan id and hwQinQSubIfDot1qTermCEVlanEnd is the end vlan id. |
| 1.3.6.1.4.1.2011.5.25.116.2.8.1.4 | ColumnhwQinQSubIfDot1qTermGroupId | read-create | current | Group-management id. |
| 1.3.6.1.4.1.2011.5.25.116.2.8.1.5 | ColumnhwQinQSubIfDot1qTermRowStatus | read-create | current | Used for controlling the creation and deletion of this row. All writeable objects in this row may be modified at any time. If a Network Management Application … |
| 1.3.6.1.4.1.2011.5.25.116.2.9 | TablehwQinQSubIfDot1qTermStatTable | not-accessible | current | When a sub interface configured Dot1q-termination, hwQinQSubIfDot1qTermStatTable used to statistic total number of the out packets and in packets. |
| 1.3.6.1.4.1.2011.5.25.116.2.9.1 | RowhwQinQSubIfDot1qTermStatEntry | not-accessible | current | The entry of an interface configured Dot1q-termination function. |
| 1.3.6.1.4.1.2011.5.25.116.2.9.1.1 | ColumnhwQinQSubIfDot1qTermStatIfIndex | not-accessible | current | Index number of the Dot1q-termination interface. |
| 1.3.6.1.4.1.2011.5.25.116.2.9.1.2 | ColumnhwQinQSubIfDot1qTermStatCEVlan | not-accessible | current | Inner vlan in packets which input the Dot1q-termination sub interface, used to indicate the packets as an index. |
| 1.3.6.1.4.1.2011.5.25.116.2.9.1.3 | ColumnhwQinQSubIfDot1qTermStatGroupId | read-only | current | The group-management id. The statistic number of packets can not get if the statistic funtion is not enabled. |
| 1.3.6.1.4.1.2011.5.25.116.2.9.1.4 | ColumnhwQinQSubIfDot1qTermStatOutPackets | read-only | current | Total number of out packets of the sub interface. |
| 1.3.6.1.4.1.2011.5.25.116.2.9.1.5 | ColumnhwQinQSubIfDot1qTermStatOutBytes | read-only | current | Total number of out bytes of the sub interface. |
| 1.3.6.1.4.1.2011.5.25.116.2.9.1.6 | ColumnhwQinQSubIfDot1qTermStatInPackets | read-only | current | Total number of in packets of the sub interface. |
| 1.3.6.1.4.1.2011.5.25.116.2.9.1.7 | ColumnhwQinQSubIfDot1qTermStatInBytes | read-only | current | Total number of in bytes of the sub interface. |
| 1.3.6.1.4.1.2011.5.25.116.2.9.1.8 | ColumnhwQinQSubIfDot1qTermStatOutBdPackets | read-only | current | Total number of broadcast packets transmitted out of the sub interface. |
| 1.3.6.1.4.1.2011.5.25.116.2.9.1.9 | ColumnhwQinQSubIfDot1qTermStatInBdPackets | read-only | current | Total number of broadcast packets received from the sub interface. |
| 1.3.6.1.4.1.2011.5.25.116.2.9.1.10 | ColumnhwQinQSubIfDot1qTermStatOutMuPackets | read-only | current | Total number of multicast packets transmitted out of the sub interface. |
| 1.3.6.1.4.1.2011.5.25.116.2.9.1.11 | ColumnhwQinQSubIfDot1qTermStatInMuPackets | read-only | current | Total number of multicast packets received from the sub interface. |
| 1.3.6.1.4.1.2011.5.25.116.2.9.1.12 | ColumnhwQinQSubIfDot1qTermStatOutUniPackets | read-only | current | Total number of unicast packets transmitted out of the sub interface. |
| 1.3.6.1.4.1.2011.5.25.116.2.9.1.13 | ColumnhwQinQSubIfDot1qTermStatInUniPackets | read-only | current | Total number of unicast packets received from the sub interface. |
| 1.3.6.1.4.1.2011.5.25.116.2.10 | TablehwQinQModeCfgTable | not-accessible | current | The table contains mode type and ethernet encapsulation type. |
| 1.3.6.1.4.1.2011.5.25.116.2.10.1 | RowhwQinQModeCfgEntry | not-accessible | current | The mode type and ethernet encapsulation type of an interface entry. |
| 1.3.6.1.4.1.2011.5.25.116.2.10.1.1 | ColumnhwQinQModeCfgIfIndex | not-accessible | current | Index number of the interface. |
| 1.3.6.1.4.1.2011.5.25.116.2.10.1.2 | ColumnhwQinQModeCfgMode | read-write | current | Mode type of the interface. |
| 1.3.6.1.4.1.2011.5.25.116.2.10.1.3 | ColumnhwQinQEtherType | read-write | current | The value of tag type is encapsulated in the head of the ethernet frame to distinguish the encapsulated mode between the 802.1Q and QinQ. |
| 1.3.6.1.4.1.2011.5.25.116.2.11 | TablehwQinQCtrlVlanCfgTable | not-accessible | current | The control-vlan id and control-vlan's attributes can be configured in sub interface. You must designate control-vlan as QinQ or Dot1q before configuring QinQ-… |
| 1.3.6.1.4.1.2011.5.25.116.2.11.1 | RowhwQinQCtrlVlanCfgEntry | not-accessible | current | The Control-vlan configuration entry. |
| 1.3.6.1.4.1.2011.5.25.116.2.11.1.1 | ColumnhwQinQCtrlVlanCfgIfIndex | not-accessible | current | Index number of the sub interface. |
| 1.3.6.1.4.1.2011.5.25.116.2.11.1.2 | ColumnhwQinQCtrlVlan | read-create | current | Control-Vlan id. |
| 1.3.6.1.4.1.2011.5.25.116.2.11.1.3 | ColumnhwQinQSubIfType | read-create | current | The type of sub interface. |
| 1.3.6.1.4.1.2011.5.25.116.2.11.1.4 | ColumnhwQinQCtrlVlanFlag | read-create | current | The service type of the sub interface, by setting hwQinQCtrlVlanFlag to the value (rtprotocolenable), the route-protocol attribute enabled; and by setting hwQi… |
| 1.3.6.1.4.1.2011.5.25.116.2.11.1.5 | ColumnhwQinQCtrlVlanRowStatus | read-create | current | This table can be created and deleted. |
| 1.3.6.1.4.1.2011.5.25.116.2.11.1.6 | ColumnhwQinQFlexibleFlag | read-create | current | The service type of the sub interface, by setting hwQinQFlexibleFlag to the value (flexibleenable), the flexible attribute enabled; So if you set hwQinQSubIfTy… |
| 1.3.6.1.4.1.2011.5.25.116.2.12 | TablehwQinQGroupCfgTable | not-accessible | current | The group-management id and group's attributes can be configured in sub interface. |
| 1.3.6.1.4.1.2011.5.25.116.2.12.1 | RowhwQinQGroupCfgEntry | not-accessible | current | Group configuration entry. |
| 1.3.6.1.4.1.2011.5.25.116.2.12.1.1 | ColumnhwQinQGroupCfgIfIndex | not-accessible | current | Index number of the interface. |
| 1.3.6.1.4.1.2011.5.25.116.2.12.1.2 | ColumnhwQinQGroupId | not-accessible | current | Group-management id. |
| 1.3.6.1.4.1.2011.5.25.116.2.12.1.3 | ColumnhwQinQGroupType | read-create | current | The type of the group. |
| 1.3.6.1.4.1.2011.5.25.116.2.12.1.4 | ColumnhwQinQGroupStat | read-create | current | Whether the statistic function is enabled. |
| 1.3.6.1.4.1.2011.5.25.116.2.12.1.5 | ColumnhwQinQGroupRowStatus | read-create | current | This table can be created and deleted. |
| 1.3.6.1.4.1.2011.5.25.116.2.13 | TablehwQinQAsymmetryCfgTable | not-accessible | current | The table to configure asymmetry attribution of the interface. |
| 1.3.6.1.4.1.2011.5.25.116.2.13.1 | RowhwQinQAsymmetryCfgEntry | not-accessible | current | The entry of the asymmetry configure table. |
| 1.3.6.1.4.1.2011.5.25.116.2.13.1.1 | ColumnhwQinQAsymmetryCfgIfIndex | not-accessible | current | Index number of the QinQ-termination interface. |
| 1.3.6.1.4.1.2011.5.25.116.2.13.1.2 | ColumnhwQinQSubIfAsymmetry | read-write | current | The asymmetry attribution of the QinQ-termination interface. |
| 1.3.6.1.4.1.2011.5.25.116.2.13.1.3 | ColumnhwQinQAsymmetryUserMode | read-write | current | The user mode attribute of the QinQ-termination sub interface. |
| 1.3.6.1.4.1.2011.5.25.116.2.14 | TablehwQinQRemarkCfgTable | not-accessible | current | Interface remark config. |
| 1.3.6.1.4.1.2011.5.25.116.2.14.1 | RowhwQinQRemarkCfgEntry | not-accessible | current | The entry of the interface remark configuration table. |
| 1.3.6.1.4.1.2011.5.25.116.2.14.1.1 | ColumnhwQinQRemarkCfgIfIndex | not-accessible | current | Index number of the sub interface, which should configure QinQ-termination function first. |
| 1.3.6.1.4.1.2011.5.25.116.2.14.1.2 | ColumnhwQinQPriorityRemark | read-write | current | The service policy map to set the 802.1P bits. By default(pevid), copy the P bits that were in the outer PE VLAN tag to the trunk VLAN tag, by setting object t… |
| 1.3.6.1.4.1.2011.5.25.116.2.15 | TablehwBpduTunnelIngressTable | not-accessible | current | The table of bpdu tunnel ingress. |
| 1.3.6.1.4.1.2011.5.25.116.2.15.1 | RowhwBpduTunnelIngressEntry | not-accessible | current | The entry of of bpdu tunnel ingress. |
| 1.3.6.1.4.1.2011.5.25.116.2.15.1.1 | ColumnhwBpduTunnelIngressPortIndex | not-accessible | current | Port index in interface. |
| 1.3.6.1.4.1.2011.5.25.116.2.15.1.2 | ColumnhwBpduTunnelBpduIngressMacIndex | not-accessible | current | bpdu mac address list BPDU Dmac protocol 01-80-C2-00-00-00 stp01 01-80-C2-00-00-01 pauseFrame 01-80-C2-00-00-02 reserved02 01-80-C2-00-00-03 reserved03 01-80-C… |
| 1.3.6.1.4.1.2011.5.25.116.2.15.1.3 | ColumnhwBpduTunnelIngressAddress | read-create | current | Group mac address. |
| 1.3.6.1.4.1.2011.5.25.116.2.15.1.4 | ColumnhwBpduTunnelIngressRowStatus | read-create | current | Bpdu tunnek ingress row status. |
| 1.3.6.1.4.1.2011.5.25.116.2.16 | TablehwBpduTunnelEgressTable | not-accessible | current | The table of bpdu tunnel egress. |
| 1.3.6.1.4.1.2011.5.25.116.2.16.1 | RowhwBpduTunnelEgressEntry | not-accessible | current | The entry of bpdu tunnel egress. |
| 1.3.6.1.4.1.2011.5.25.116.2.16.1.1 | ColumnhwBpduTunnelEgressPortIndex | not-accessible | current | Port index in interface. |
| 1.3.6.1.4.1.2011.5.25.116.2.16.1.2 | ColumnhwBpduTunnelBpduEgressMacIndex | not-accessible | current | Bpdu MAC address list BPDU DMAC protocol 01-80-C2-00-00-00 stp01 01-80-C2-00-00-01 pauseFrame 01-80-C2-00-00-02 reserved02 01-80-C2-00-00-03 reserved03 01-80-C… |
| 1.3.6.1.4.1.2011.5.25.116.2.16.1.3 | ColumnhwBpduTunnelEgressAddress | read-create | current | Group mac address. |
| 1.3.6.1.4.1.2011.5.25.116.2.16.1.4 | ColumnhwBpduTunnelEgressRowStatus | read-create | current | Row Status. |
| 1.3.6.1.4.1.2011.5.25.116.2.17 | TablehwBpduTunnelVlanTable | not-accessible | current | The table of port bpdu tunnel. |
| 1.3.6.1.4.1.2011.5.25.116.2.17.1 | RowhwBpduTunnelVlanEntry | not-accessible | current | The entry of port bpdu tunnel vlan. |
| 1.3.6.1.4.1.2011.5.25.116.2.17.1.1 | ColumnhwBpduTunnelPortIndex | not-accessible | current | Port index in interface. |
| 1.3.6.1.4.1.2011.5.25.116.2.17.1.2 | ColumnhwBpduTunnelEnable | read-write | current | Bpdu tunnel enable. |
| 1.3.6.1.4.1.2011.5.25.116.2.17.1.3 | ColumnhwBpduTunnelVlanListLow | read-write | current | Vlan bpdu tunnel in port. |
| 1.3.6.1.4.1.2011.5.25.116.2.17.1.4 | ColumnhwBpduTunnelVlanListHigh | read-write | current | Vlan bpdu tunnel in port. |
| 1.3.6.1.4.1.2011.5.25.116.2.18 | TablehwBpduTunnelTable | not-accessible | current | The table of bpdu tunnel. |
| 1.3.6.1.4.1.2011.5.25.116.2.18.1 | RowhwBpduTunnelEntry | not-accessible | current | The entry of of bpdu tunnel. |
| 1.3.6.1.4.1.2011.5.25.116.2.18.1.1 | ColumnhwBpduTunnelBpduIndex | not-accessible | current | Bpdu mac address list BPDU Dmac protocol 01-80-C2-00-00-00 stp01 (1) 01-80-C2-00-00-01 pauseFrame (2) 01-80-C2-00-00-02 reserved02 (3) 01-80-C2-00-00-03 reserv… |
| 1.3.6.1.4.1.2011.5.25.116.2.18.1.2 | ColumnhwBpduTunnelBpduEnable | read-write | current | Bpdu tunnel enable or disable. |
| 1.3.6.1.4.1.2011.5.25.116.2.18.1.3 | ColumnhwBpduTunnelMultiAddress | read-create | current | Group MAC address. |
| 1.3.6.1.4.1.2011.5.25.116.2.18.1.4 | ColumnhwBpduTunnelRowStatus | read-create | current | Row Status. |
| 1.3.6.1.4.1.2011.5.25.116.2.19 | TablehwQinQSwapCfgTable | not-accessible | current | This table describes the vlan swap configurations of interfaces. |
| 1.3.6.1.4.1.2011.5.25.116.2.19.1 | RowhwQinQSwapCfgEntry | not-accessible | current | An entry is created for each active ethernet type interface in the device and deleted when the interface been not exist. |
| 1.3.6.1.4.1.2011.5.25.116.2.19.1.1 | ColumnhwQinQSwapCfgIfIndex | not-accessible | current | Index number of the interface. |
| 1.3.6.1.4.1.2011.5.25.116.2.19.1.2 | ColumnhwQinQSwapCfgFlag | read-write | current | QinQ swap flag of the interface, which indicates whether to swap the two vlan tags or not when the interface receives a packet with two 802.1q tags. |
| 1.3.6.1.4.1.2011.5.25.116.3 | NodehwQinQConformance | |||
| 1.3.6.1.4.1.2011.5.25.116.3.1 | NodehwQinQGroups | |||
| 1.3.6.1.4.1.2011.5.25.116.3.1.1 | GrouphwQinQSystemBaseGroup | current | A collection of objects providing device level control and status information for the system. | |
| 1.3.6.1.4.1.2011.5.25.116.3.1.2 | GrouphwQinQBpduTunnelGroup | current | A collection of objects providing device level control and status information for the interface. | |
| 1.3.6.1.4.1.2011.5.25.116.3.1.3 | GrouphwQinQSubIfVlanStackingGroup | current | A collection of objects providing device level control and status information for the sub interface. | |
| 1.3.6.1.4.1.2011.5.25.116.3.1.4 | GrouphwQinQSubIfStackingStatGroup | current | A collection of objects providing device level control and status information for the sub interface. | |
| 1.3.6.1.4.1.2011.5.25.116.3.1.5 | GrouphwQinQSubIfTermGroup | current | A collection of objects providing device level control and status information for the sub interface. | |
| 1.3.6.1.4.1.2011.5.25.116.3.1.6 | GrouphwQinQSubIfTermStatGroup | current | A collection of objects providing device level control and status information for the sub interface. | |
| 1.3.6.1.4.1.2011.5.25.116.3.1.7 | GrouphwQinQStaticARPCfgGroup | current | A collection of items of static ARP table. | |
| 1.3.6.1.4.1.2011.5.25.116.3.1.8 | GrouphwQinQStaticMACCfgGroup | current | A collection of items of static MAC table. | |
| 1.3.6.1.4.1.2011.5.25.116.3.1.9 | GrouphwQinQSubIfDot1qTermGroup | current | A collection of items of Dot1q-termination table. | |
| 1.3.6.1.4.1.2011.5.25.116.3.1.10 | GrouphwQinQSubIfDot1qTermStatGroup | current | A collection of items of Dot1q-termination statistic table. | |
| 1.3.6.1.4.1.2011.5.25.116.3.1.11 | GrouphwQinQModeCfgGroup | current | A collection of items of Mode config table. | |
| 1.3.6.1.4.1.2011.5.25.116.3.1.12 | GrouphwQinQCtrlVlanCfgGroup | current | A collection of items of Control vlan table. | |
| 1.3.6.1.4.1.2011.5.25.116.3.1.13 | GrouphwQinQGroupCfgGroup | current | A collection of items of group table. | |
| 1.3.6.1.4.1.2011.5.25.116.3.1.14 | GrouphwQinQAsymmetryCfgGroup | current | A collection of items of asymmetry config table. | |
| 1.3.6.1.4.1.2011.5.25.116.3.1.15 | GrouphwQinQRemarkCfgGroup | current | A collection of items of Mode config table. | |
| 1.3.6.1.4.1.2011.5.25.116.3.1.16 | GrouphwBpduTunnelIngressGroup | current | A collection of items of Group Mac table. | |
| 1.3.6.1.4.1.2011.5.25.116.3.1.17 | GrouphwBpduTunnelEgressGroup | current | A collection of items of Group Mac table. | |
| 1.3.6.1.4.1.2011.5.25.116.3.1.18 | GrouphwBpduTunnelVlanGroup | current | A collection of items of Mode port bpdu tunnel table. | |
| 1.3.6.1.4.1.2011.5.25.116.3.1.19 | GrouphwBpduTunnelGroup | current | A collection of items of bpdu tunnel mac table. | |
| 1.3.6.1.4.1.2011.5.25.116.3.1.20 | GrouphwQinQSwapCfgGroup | current | A collection of items of Swap config table. |
Type Definitions
| Name | Syntax | Status | Description |
|---|---|---|---|
| BpduIndex | INTEGER { stp01(1), pauseFrame(2), reserved02(3), reserved03(4), reserved04(5), reserved05(6), reserved06(7), reserved07(8), stp02(9), reserved08(10), hgmp(11), reserved09(12), reserved10(13), reserved11(14), reserved12(15), reserved13(16), reserved14(17), reserved15(18), reserved16(19), reserved17(20), isisLevel01(21), isisLevel02(22), reserved18(23), reserved19(24), reserved20(25), reserved21(26), reserved22(27), reserved23(28), reserved24(29), reserved25(30), reserved26(31), reserved27(32), gmrp(33), gvrp(34), reserved28(35), reserved29(36), reserved30(37), reserved31(38), reserved32(39), reserved33(40), reserved34(41), reserved35(42), reserved36(43), reserved37(44), reserved38(45), reserved39(46), reserved40(47), reserved41(48), lacp(49), cdp(50), pagp(51), udld(52), vtp(53), } | current | A list value for bpdu. |