HUAWEI-RSTP-EXT-MIB
56 objects
The mib is used for defining the RSTP MIB object. RSTP is used to check the ring network on the user side to prevent the services from being affected. After that, the system checks the ring network on the user side automatically.
Imported Objects
| BRIDGE-MIB | dot1dStpPortEntry |
| HUAWEI-DEVICE-MIB | hwFrameIndex hwOntIndex hwPortIndex hwSlotIndex |
| HUAWEI-MIB | huaweiMgmt |
| SNMPv2-SMI | Counter32 Integer32 MODULE-IDENTITY NOTIFICATION-TYPE OBJECT-TYPE Unsigned32 |
| SNMPv2-TC | MacAddress TEXTUAL-CONVENTION TruthValue |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.2011.5.21 | IdentityhwRstpExt | The mib is used for defining the RSTP MIB object. RSTP is used to check the ring network on the user side to prevent the services from being affected. After th… | ||
| 1.3.6.1.4.1.2011.5.21.1 | NodehwRstpMibObject | |||
| 1.3.6.1.4.1.2011.5.21.1.1 | Scalarhwdot1dStpAdminStatus | read-write | current | Enabling/Disabling Spanning Tree of the Switch Options: 1. enabled(1) 2. disabled(2) Default: disabled(2) |
| 1.3.6.1.4.1.2011.5.21.1.2 | Scalarhwdot1dStpForceVersion | read-write | current | Configuring RSTP Operating Mode, RSTP is compatible with STP. If a bridge running STP is in this switched network, this can be used to set RSTP to work in STP … |
| 1.3.6.1.4.1.2011.5.21.1.3 | Scalarhwdot1dStpDiameter | read-write | current | Configuring Diameter of the Switched Network, Switched network is a loop-free tree structure in which any two PCs are connected by a series of bridges. Network… |
| 1.3.6.1.4.1.2011.5.21.1.4 | Scalarhwdot1dStpRootBridgeAddress | read-only | current | MAC Address of the root bridge. |
| 1.3.6.1.4.1.2011.5.21.1.5 | Tablehwdot1dStpPortXTable | not-accessible | current | This table describes rstp port expand table, The index of this table is is not supported. |
| 1.3.6.1.4.1.2011.5.21.1.5.1 | Rowhwdot1dStpPortXEntry | not-accessible | current | This table describes rstp port expand table, The index of this entry is is not supported. |
| 1.3.6.1.4.1.2011.5.21.1.5.1.1 | Columnhwdot1dStpPortAdminStatus | read-write | current | Enabling/Disabling Spanning Tree on the Port The spanning tree can be disabled on specified Ethernet port to forbid these ports participating in spanning tree … |
| 1.3.6.1.4.1.2011.5.21.1.5.1.2 | Columnhwdot1dStpPortEdgeport | read-write | current | Configuring specified port to be EdgePort, If the current Ethernet port is not connected with any Ethernet port of other bridges, this port should be configure… |
| 1.3.6.1.4.1.2011.5.21.1.5.1.3 | Columnhwdot1dStpPortPointToPoint | read-write | current | Configuring the Port to Connect Point-to-Point Link, The two ports connected via the Point-to-Point link can enter the forwarding state rapidly by transmitting… |
| 1.3.6.1.4.1.2011.5.21.1.5.1.4 | Columnhwdot1dStpMcheck | read-write | current | Configuring mCheck of Specified Port, By configuring mCheck, the user can check if there is the bridge running STP in the network segment connected with the ac… |
| 1.3.6.1.4.1.2011.5.21.1.5.1.5 | Columnhwdot1dStpTransLimit | read-write | current | Configuring Maximum Transmission Speed of Specified Port, The maximum transmission speed of Ethernet port is related to its physical state and network structur… |
| 1.3.6.1.4.1.2011.5.21.1.5.1.6 | Columnhwdot1dSetStpDefaultPortCost | read-write | current | come back to default path cost of specified port, The path cost of Ethernet port is related to its link speed. The higher the link speed is, the lower the path… |
| 1.3.6.1.4.1.2011.5.21.1.6 | Tablehwdot1dStpPortStatTable | not-accessible | current | This table describes rstp port statistic table, The index of this table is not supported. |
| 1.3.6.1.4.1.2011.5.21.1.6.1 | Rowhwdot1dStpPortStatEntry | not-accessible | current | This table describes rstp port statistic table, The index of this entry is not supported. |
| 1.3.6.1.4.1.2011.5.21.1.6.1.1 | Columnhwdot1dStpRXStpBPDU | read-only | current | Number of STP BPDU Received. |
| 1.3.6.1.4.1.2011.5.21.1.6.1.2 | Columnhwdot1dStpTXStpBPDU | read-only | current | Number of STP BPDU Transmitted. |
| 1.3.6.1.4.1.2011.5.21.1.6.1.3 | Columnhwdot1dStpRXTCNBPDU | read-only | current | Number of TCN BPDU Received. |
| 1.3.6.1.4.1.2011.5.21.1.6.1.4 | Columnhwdot1dStpTXTCNBPDU | read-only | current | Number of TCN BPDU Transmitted. |
| 1.3.6.1.4.1.2011.5.21.1.6.1.5 | Columnhwdot1dStpRXRSTPBPDU | read-only | current | Number of RSTP BPDU Received. |
| 1.3.6.1.4.1.2011.5.21.1.6.1.6 | Columnhwdot1dStpTXRSTPBPDU | read-only | current | Number of RSTP BPDU Transmitted. |
| 1.3.6.1.4.1.2011.5.21.1.6.1.7 | Columnhwdot1dStpClearStatistics | read-write | current | To clear statistics of Rapid Spanning Tree Protocol (RSTP for short). Options: 1. clear(1) -indicates clearing statistics of Rapid Spanning Tree Protocol |
| 1.3.6.1.4.1.2011.5.21.1.7 | ScalarhwRingCheckAdminStatus | read-write | current | Indicates the status of the ring check on the user side. Options: 1. enabled(1) 2. disabled(2) Default: disabled(2) |
| 1.3.6.1.4.1.2011.5.21.1.8 | ScalarhwBpduTunnelAdminStatus | read-write | current | Enabling/Disabling BPDU tunneling function. Options: 1. enabled(1) 2. disabled(2) Default: disabled(2) |
| 1.3.6.1.4.1.2011.5.21.1.9 | ScalarhwRingCheckModeStatus | read-write | current | Set ring check mode. Options: 1. privateBpdu(0) -indicates the ring check mode is private-bpdu 2. privateEthtype(1) -indicates the ring check mode is private-e… |
| 1.3.6.1.4.1.2011.5.21.1.10 | ScalarhwRingCheckPrivateEthtype | read-write | current | Indicates the private Ethernet protocol type of the user-side ring check packet. Range: 1536-65535 Default: 33536 |
| 1.3.6.1.4.1.2011.5.21.1.11 | ScalarhwRingCheckResumeInterval | read-write | current | Indicates the interval time of re-activating the ring check port/ONT/CNU. 0 means to disable the function of automatically re-activating a port/ONT/CNU. 1-1440… |
| 1.3.6.1.4.1.2011.5.21.1.12 | TablehwRingCheckRecordTable | not-accessible | current | Used to query the deactivation information of ring check, The index of this table is hwRingCheckRecordIndex. |
| 1.3.6.1.4.1.2011.5.21.1.12.1 | RowhwRingCheckRecordEntry | not-accessible | current | Used to query the deactivation information of ring check, The index of this entry is hwRingCheckRecordIndex. |
| 1.3.6.1.4.1.2011.5.21.1.12.1.1 | ColumnhwRingCheckRecordIndex | not-accessible | current | Indicates the index of a deactivation record. |
| 1.3.6.1.4.1.2011.5.21.1.12.1.2 | ColumnhwRingCheckRecordFrameIndex | read-only | current | Indicates the Frame ID of the port/ONT/CNU that is deactivated by ring check. |
| 1.3.6.1.4.1.2011.5.21.1.12.1.3 | ColumnhwRingCheckRecordSlotIndex | read-only | current | Indicates the Slot ID of the port/ONT/CNU that is deactivated by ring check. |
| 1.3.6.1.4.1.2011.5.21.1.12.1.4 | ColumnhwRingCheckRecordPortIndex | read-only | current | Indicates the Port ID of the port/ONT/CNU that is deactivated by ring check. |
| 1.3.6.1.4.1.2011.5.21.1.12.1.5 | ColumnhwRingCheckRecordOntIndex | read-only | current | Indicates the index of the ONT/CNU that is deactivated by ring check. -1 indicates that the operation object is not ONT/CNU. |
| 1.3.6.1.4.1.2011.5.21.1.12.1.6 | ColumnhwRingCheckRecordCountdown | read-only | current | Indicates remaining waiting time for automatic activation. -1 indicates that the automatic activation function of ring check is disabled. Unit: minute |
| 1.3.6.1.4.1.2011.5.21.1.13 | ScalarhwRingCheckTrapNotify | read-write | current | Indicates the trap notification mode of ring check on the user side. Options: 1. event(1) -indicates the way of trap is event 2. alarm(2) -indicates the way of… |
| 1.3.6.1.4.1.2011.5.21.1.14 | ScalarhwRingCheckUplinkDetectionControl | read-write | current | Configure the ring check function on the network side. Options: 1. enabled(1) 2. disabled(2) Default: disabled(2) |
| 1.3.6.1.4.1.2011.5.21.1.15 | ScalarhwRingCheckCascadeDetectionControl | read-write | current | Configure the ring check function on the cascading side. Options: 1. enabled(1) 2. disabled(2) Default: disabled(2) |
| 1.3.6.1.4.1.2011.5.21.2 | NodehwRingCheckTrapsVbOids | |||
| 1.3.6.1.4.1.2011.5.21.2.1 | ScalarhwRingCheckRemoteMACAddress | accessible-for-notify | current | Indicates the remote Remote mac address. |
| 1.3.6.1.4.1.2011.5.21.2.2 | ScalarhwCnuIndex | accessible-for-notify | current | Indicates the CNU ID. |
| 1.3.6.1.4.1.2011.5.21.3 | NodehwRingCheckTraps | |||
| 1.3.6.1.4.1.2011.5.21.3.1 | NodehwRingCheckAlarmTraps | |||
| 1.3.6.1.4.1.2011.5.21.3.1.0 | NodehwRingCheckAlarmTrapsPrefix | |||
| 1.3.6.1.4.1.2011.5.21.3.1.0.1 | NotificationhwRingCheckPortRingTrap | current | The SNMP trap is generated when the ring topology in the subscriber port is found. | |
| 1.3.6.1.4.1.2011.5.21.3.1.0.2 | NotificationhwRingCheckXponPortRingTrap | current | The SNMP trap is generated when the ring topology in the subscriber xPON port is found. | |
| 1.3.6.1.4.1.2011.5.21.3.1.0.3 | NotificationhwRingCheckEocPortRingTrap | current | The SNMP trap is generated when the ring topology in the subscriber EoC port is found. | |
| 1.3.6.1.4.1.2011.5.21.3.1.1 | NodehwRingCheckAlarmWarningTrapsPrefix | |||
| 1.3.6.1.4.1.2011.5.21.3.1.1.1 | NotificationhwRingCheckPortRingWarningTrap | current | The SNMP trap is generated when the ring topology in the subscriber port is found. | |
| 1.3.6.1.4.1.2011.5.21.3.1.1.2 | NotificationhwRingCheckXponPortRingWarningTrap | current | The SNMP trap is generated when the ring topology in the subscriber xPON port is found. | |
| 1.3.6.1.4.1.2011.5.21.3.1.1.3 | NotificationhwRingCheckEocPortRingWarningTrap | current | The SNMP trap is generated when the ring topology in the subscriber EoC port is found. | |
| 1.3.6.1.4.1.2011.5.21.3.1.1.4 | NotificationhwRingCheckPortRingClearedTrap | current | The SNMP trap is generated when the ring topology in the subscriber port is cleared. | |
| 1.3.6.1.4.1.2011.5.21.3.1.1.5 | NotificationhwRingCheckXponPortRingClearedTrap | current | The SNMP trap is generated when the ring topology in the subscriber xPON port is cleared. | |
| 1.3.6.1.4.1.2011.5.21.3.1.1.6 | NotificationhwRingCheckEocPortRingClearedTrap | current | The SNMP trap is generated when the ring topology in the subscriber EoC port is cleared. |
Type Definitions
| Name | Syntax | Status | Description |
|---|---|---|---|
| EnabledStatus | INTEGER { enabled(1), disabled(2) } | current | A simple status value for the object. |