HUAWEI-SWITCHOVER-MIB
61 objects
This MIB object provides functions of active/standby switchover, data saving and duplication, and query of data synchronization status between the active and standby control boards.
Imported Objects
| HUAWEI-DEVICE-MIB | hwFrameIndex hwSlotIndex |
| HUAWEI-MIB | huaweiUtility |
| SNMPv2-SMI | --FROM RFC1155-SMI TimeTicks Integer32 MODULE-IDENTITY NOTIFICATION-TYPE OBJECT-TYPE Unsigned32 |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.2011.6.22 | IdentityhwSwitchOver | This MIB object provides functions of active/standby switchover, data saving and duplication, and query of data synchronization status between the active and s… | ||
| 1.3.6.1.4.1.2011.6.22.1 | NodeswitchoverMibObject | |||
| 1.3.6.1.4.1.2011.6.22.1.1 | NodehwDataswitchover | |||
| 1.3.6.1.4.1.2011.6.22.1.1.1 | ScalarhwQrydatasyncondition | read-only | current | The query of the status of data synchronization between the active and standby control boards. Data synchronization between the active and standby control boar… |
| 1.3.6.1.4.1.2011.6.22.1.1.2 | ScalarhwswitchoverAdminStatus | read-write | current | Manual active/standby switchover. Active/standby switchover refers to the process that the standby control board works as the active control board when the act… |
| 1.3.6.1.4.1.2011.6.22.1.1.3 | ScalarhwDataSYNSWStatus | read-write | current | The switch of data synchronization. This object is not supported currently. Options: 1. on(1) -The switch of data synchronization is on. 2. off(2) -The switch … |
| 1.3.6.1.4.1.2011.6.22.1.2 | NodehwDataSave | |||
| 1.3.6.1.4.1.2011.6.22.1.2.1 | ScalarhwAutoSaveSwitch | read-write | current | The switch of automatic data saving. Options: 1. on(1) -indicates that the automatic data saving is enabled. The system saves the data and configuration files … |
| 1.3.6.1.4.1.2011.6.22.1.2.2 | ScalarhwAutoSaveCycle | read-write | current | The period of automatic data saving. The period is in the unit of 10 ms, with a value range of 60000-60480000 (10 minutes to one week). If the data saving is e… |
| 1.3.6.1.4.1.2011.6.22.1.2.3 | ScalarhwImmediateSave | read-write | current | It is the object for saving the data and the configuration file. Options: 1. saveDBBDRN(1) -indicates that the data and the configuration file are saved at the… |
| 1.3.6.1.4.1.2011.6.22.1.2.4 | ScalarhwAutoSaveTimeSwitch | read-write | current | The switch of automatic data saving at the absolute time. Options: 1. on(1) -indicates that the automatic data saving at the absolute time is enabled. That is,… |
| 1.3.6.1.4.1.2011.6.22.1.2.5 | ScalarhwAutoSaveTime | read-write | current | The time of automatic data saving. This value can be converted into the hexadecimal number 0x00hhmmss (hh representing hour, mm representing minute, and ss rep… |
| 1.3.6.1.4.1.2011.6.22.1.2.6 | ScalarhwSaveData | read-write | current | Immediate saving of the database. Only database is saved through the operation on this object. Options: 1. nosavedata(-1) -No database saving is performed in t… |
| 1.3.6.1.4.1.2011.6.22.1.2.7 | ScalarhwSaveConfiguration | read-write | current | It is the object for saving the configuration file. Options: 1. saveconfiguration(1) -indicates that only the configuration file is saved, the data is not save… |
| 1.3.6.1.4.1.2011.6.22.1.2.8 | ScalarhwSaveRequestID | read-write | current | The saving of the operation request ID. The request ID is used for identifying each saving operation. It must be unique, and cannot be issued separately. The o… |
| 1.3.6.1.4.1.2011.6.22.1.2.9 | ScalarhwActiveConfiguration | read-write | current | The activation of the configuration files. Options: 1. noactiveConfiguration(-1) -indicates that the configuration files are not activated. 2. activeConfigurat… |
| 1.3.6.1.4.1.2011.6.22.1.2.10 | ScalarhwActiveConfigurationResult | read-only | current | The result of Configuration Actived. Options: 1. partialFailure(1) -indicates that activating the configuration files of the active control board fails. 2. suc… |
| 1.3.6.1.4.1.2011.6.22.1.2.11 | ScalarhwAutoSaveCfgChangedtimer | read-write | current | The time of saving configuration files automatically. The time is in the unit of 10 ms,with a value range of 12000-8640000 (two minutes to one day). If the val… |
| 1.3.6.1.4.1.2011.6.22.1.2.12 | ScalarhwAutoSaveType | read-write | current | The type of automatic saving. Options: 1. database(1) -indicates the saving of only the database. 2. configuration(2) -indicates the saving of only the configu… |
| 1.3.6.1.4.1.2011.6.22.1.2.13 | ScalarhwEraseData | read-write | current | The erasing of the database. If the configuration data of the active or standby control board needs to be erased, the database requires to be erased. After the… |
| 1.3.6.1.4.1.2011.6.22.1.3 | NodehwRollBack | |||
| 1.3.6.1.4.1.2011.6.22.1.3.1 | ScalarhwRollBackOper | read-write | current | This object is used to roll back the system. Options: 1. initial(1) -Indicates the initial value. 2. rollback(2) -Indicates the system is to be rolled back. |
| 1.3.6.1.4.1.2011.6.22.1.4 | NodehwDuplicate | |||
| 1.3.6.1.4.1.2011.6.22.1.4.1 | ScalarhwSynDataAdminStatus | read-write | current | Duplication of the host programs, databases, multi-lingual files, configuration files, and package files from the active control board to the standby control b… |
| 1.3.6.1.4.1.2011.6.22.1.4.2 | ScalarhwDuplicateProcess | read-only | current | The process of duplication. Range: 0-100 |
| 1.3.6.1.4.1.2011.6.22.1.4.3 | ScalarhwCloneRequestID | read-write | obsolete | The request ID for operation information table. This object is not supported currently. |
| 1.3.6.1.4.1.2011.6.22.1.5 | NodehwDataChange | |||
| 1.3.6.1.4.1.2011.6.22.1.5.1 | ScalarhwSystemDataChange | read-only | current | Querying whether the system configuration (database and configuration files) changes. For the value of this object, 0 indicates that the system configuration d… |
| 1.3.6.1.4.1.2011.6.22.1.5.2 | ScalarhwSystemDataState | read-only | current | Querying whether the current database is null. A null database refers to the database with no configuration data. Options: 1. blank(1) -indicates that the data… |
| 1.3.6.1.4.1.2011.6.22.1.5.3 | ScalarhwSystemDataInitState | read-only | current | Querying database state when system init. Options: 1. blank(1) -indicates that the database is null. 2. modified(2) -indicates that the database is not null. |
| 1.3.6.1.4.1.2011.6.22.1.6 | NodehwConfigurationResumedResult | |||
| 1.3.6.1.4.1.2011.6.22.1.6.1 | TablehwConfigurationUnResumedTable | not-accessible | current | This table is used to query information not restored during the system configuration restoration. |
| 1.3.6.1.4.1.2011.6.22.1.6.1.1 | RowhwConfigurationUnResumedEntry | not-accessible | current | The index of this entry is hwConfigurationUnResumedListIndex. |
| 1.3.6.1.4.1.2011.6.22.1.6.1.1.1 | ColumnhwConfigurationUnResumedListIndex | not-accessible | current | This is the index of table hwConfigurationUnResumedTable. |
| 1.3.6.1.4.1.2011.6.22.1.6.1.1.2 | ColumnhwConfigurationUnResumedList | read-only | current | This is a list for unresumed configurations, for example: board add 0/1 ADI board add 0/2 FBSDE |
| 1.3.6.1.4.1.2011.6.22.1.6.1.1.3 | ColumnhwConfigurationUnResumedListIsLast | read-only | current | Indicates whether the unresumed configuration list is the last one. Options: 1.islast(1)-last. 2.notlast(2)-not last. |
| 1.3.6.1.4.1.2011.6.22.2 | NodehwSwitchOverTraps | |||
| 1.3.6.1.4.1.2011.6.22.2.1 | NodehwSwitchOverTrapsOids | |||
| 1.3.6.1.4.1.2011.6.22.2.1.1 | ScalarhwConfigSN | accessible-for-notify | current | The count of saving the system configurations. |
| 1.3.6.1.4.1.2011.6.22.2.1.2 | ScalarhwSynSchedulguage | accessible-for-notify | current | Progress of the synchronization between the active and standby control boards. Range: 0-100 |
| 1.3.6.1.4.1.2011.6.22.2.1.3 | ScalarhwTrapSaveResult | accessible-for-notify | current | Result of the data saving. The returned value 0 indicates that the data is saved successfully. The returned value 1 indicates that the data saving fails. |
| 1.3.6.1.4.1.2011.6.22.2.2 | NodehwSwitchOverCommonTraps | |||
| 1.3.6.1.4.1.2011.6.22.2.2.0 | NodehwSwitchOverCommonTrapsPrefix | |||
| 1.3.6.1.4.1.2011.6.22.2.2.0.1 | NotificationhwSysCfgChangedTrap | current | This trap message is reported when the system database is being saved. | |
| 1.3.6.1.4.1.2011.6.22.2.2.0.2 | NotificationhwSynScheduleTrap | current | This trap message, indicating the synchronization progress, is reported during the data synchronization between the active and standby control boards. | |
| 1.3.6.1.4.1.2011.6.22.2.2.0.3 | NotificationhwSaveConfigStartTrap | current | This trap is reported when configuration file starts to be saved. | |
| 1.3.6.1.4.1.2011.6.22.2.2.0.4 | NotificationhwSaveConfigCompleteTrap | current | This trap is reported when configuration file is saved completely. | |
| 1.3.6.1.4.1.2011.6.22.2.3 | NodehwSwitchOverAlarmTraps | |||
| 1.3.6.1.4.1.2011.6.22.2.3.0 | NodehwSwitchOverAlarmTrapsPrefix | |||
| 1.3.6.1.4.1.2011.6.22.2.3.0.1 | NotificationhwSwitchoverTrap | current | This trap is reported when the switchover occurs between the active and standby boards. | |
| 1.3.6.1.4.1.2011.6.22.2.3.0.2 | NotificationhwBatchBackupStartTrap | current | This trap is reported when the system batch hot backup starts. | |
| 1.3.6.1.4.1.2011.6.22.2.3.0.3 | NotificationhwBatchBackupCompleteTrap | current | This trap is reported when the system batch hot backup is complete. | |
| 1.3.6.1.4.1.2011.6.22.2.3.0.4 | NotificationhwInUpgradeTrap | current | This trap is reported when the system enters the in-service upgrade scenario. | |
| 1.3.6.1.4.1.2011.6.22.2.3.0.5 | NotificationhwSoftVersionInconsistentTrap | current | This trap is reported when software versions of active and standby boards are inconsistent. | |
| 1.3.6.1.4.1.2011.6.22.2.3.0.6 | NotificationhwDataChangeDuringSwitchOverTrap | current | This trap is reported when Data changes during the system switchover. | |
| 1.3.6.1.4.1.2011.6.22.3 | NodehwSwitchOverControl | |||
| 1.3.6.1.4.1.2011.6.22.3.1 | ScalarhwSwitchOverStatus | read-write | current | The switch of the active/standby switchover. Options: 1. on(1) -indicates that the active/standby switchover is enabled. 2. off(2) -indicates that the active/s… |
| 1.3.6.1.4.1.2011.6.22.3.2 | ScalarhwSwitchOverPeriod | read-write | current | The period of the active/standby switchover. Options: 1. day(1) -indicates that the switchover is performed once a day. 2. week(2) -indicates that the switchov… |
| 1.3.6.1.4.1.2011.6.22.3.3 | ScalarhwSwitchOverInverseDayNo | read-write | current | Days since the periodic switchover has been started. Its value range depends on the value of object hwSwitchOverPeriod. When hwSwitchOverPeriod is set to day(1… |
| 1.3.6.1.4.1.2011.6.22.3.4 | ScalarhwSwitchOverTime | read-write | current | Time when switchover will happen. Time is set by a string in the format of hh:mm:ss. The value range of hh is from 00 to 23. The value range of mm is from 00 t… |
| 1.3.6.1.4.1.2011.6.22.3.5 | ScalarhwAutoSwitchOverStatus | read-write | current | Status of auto switchover function. If the value of switchover switch hwSwitchOverStatus is off(2), the system cannot perform the active/standby switchover. Op… |