HUAWEI-VOICEPORT-MIB
290 objects
The entity of voice port's configuration.
Imported Objects
| HUAWEI-DEVICE-MIB | hwConfigChangeIP |
| HUAWEI-MIB | huaweiUtility |
| SNMPv2-CONF | MODULE-COMPLIANCE NOTIFICATION-GROUP OBJECT-GROUP |
| SNMPv2-SMI | Counter32 Integer32 IpAddress MODULE-IDENTITY NOTIFICATION-TYPE OBJECT-TYPE private TimeTicks Unsigned32 |
| SNMPv2-TC | DisplayString RowStatus TEXTUAL-CONVENTION |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.2011.6.113 | IdentityhwIASVoicePort | The entity of voice port's configuration. | ||
| 1.3.6.1.4.1.2011.6.113.1 | NodehwIASVoicePortObjects | |||
| 1.3.6.1.4.1.2011.6.113.1.1 | TablehwPstnPTPConfigTable | not-accessible | current | A list of hwPstnPTPConfigEntry objects. The index of this table is hwPstnPTPIndex. |
| 1.3.6.1.4.1.2011.6.113.1.1.1 | RowhwPstnPTPConfigEntry | not-accessible | current | A list of hwPstnPTPConfigEntry objects. The index of this entry is hwPstnPTPIndex. |
| 1.3.6.1.4.1.2011.6.113.1.1.1.1 | ColumnhwPstnPTPIndex | not-accessible | current | Indicates the shelf/slot/port index. |
| 1.3.6.1.4.1.2011.6.113.1.1.1.2 | ColumnhwPstnPTPSendVoiceGain | read-write | current | Indicates the transmit gain (dB). 1: 5 dB 2: 4.5 dB 3: 4 dB 4: 3.5 dB 5: 3 dB 6: 2.5 dB 7: 2 dB 8: 1.5 dB 9: 1 dB 10: 0.5 dB 11: 0 dB 12: -0.5 dB 13: -1 dB 14:… |
| 1.3.6.1.4.1.2011.6.113.1.1.1.3 | ColumnhwPstnPTPRecvVoiceGain | read-write | current | Indicates the receive gain (dB). 1: 0 dB 2: -0.5 dB 3: -1 dB 4: -1.5 dB 5: -2 dB 6: -2.5 dB 7: -3 dB 8: -3.5 dB 9: -4 dB 10: -4.5 dB 11: -5 dB 12: -5.5 dB 13: … |
| 1.3.6.1.4.1.2011.6.113.1.1.1.4 | ColumnhwPstnPTPDialMode | read-write | current | Indicates the dialing mode. Options: 1.modeDtmfPulseBoth(1) -indicates the dial mode are both pulse and DTMF 2.modeDtmfOnly(2) -indicates the dial mode is only… |
| 1.3.6.1.4.1.2011.6.113.1.1.1.5 | ColumnhwPstnPTPReversePolePulseEnable | read-write | current | Indicates whether to support the polarity-reversing pulse. Options: 1.reversePolePulseDisable(1) -indicates the reverse pole pulse is disable 2.reversePolePuls… |
| 1.3.6.1.4.1.2011.6.113.1.1.1.6 | ColumnhwPstnPTPReversePoleLevel | read-write | current | Indicates the level width of the polarity-reversing pulse (unit: ms). Step: 10 ms. |
| 1.3.6.1.4.1.2011.6.113.1.1.1.7 | ColumnhwPstnPTPPolarityReverseMode | read-write | current | The polarity reversal mode. Options: 1.hardReversePole(1) -Indicates the polarity reversal mode is hard polarity reversal 2.softReversePole(2) -Indicates the p… |
| 1.3.6.1.4.1.2011.6.113.1.1.1.8 | ColumnhwPstnPTPImpedance | read-write | current | Port impedance of the port. The following values indicates different impedance with different application circumstances. 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16… |
| 1.3.6.1.4.1.2011.6.113.1.1.1.9 | ColumnhwPstnPTPCurrent | read-write | current | Port current supported by the board. The value ranges from 1 to 8, which indicates the port current value (commonly the maximum number of the ports with the cu… |
| 1.3.6.1.4.1.2011.6.113.1.1.1.10 | ColumnhwPstnPTPHighLevel | read-write | current | Indicates the high level width of the 16KC (unit: ms). |
| 1.3.6.1.4.1.2011.6.113.1.1.1.11 | ColumnhwPstnPTPLowLevel | read-write | current | Indicates the low level width of the 16KC (unit: ms). |
| 1.3.6.1.4.1.2011.6.113.1.1.1.12 | ColumnhwPstnPTPKCType | read-write | current | Indicates the 12KC/16KC type. Options: 1.port1216kcSelector16kc(1) -indicates the 16kc 2.port1216kcSelector12kc(2) -indicates the 12kc |
| 1.3.6.1.4.1.2011.6.113.1.1.1.13 | ColumnhwPstnPTPVoltage | read-write | current | Indicates the valid level of the 12KC/16KC. Options: 1.port1216kcValidVoltage0(1) -indicates 0.45 Vrms 2.port1216kcValidVoltage1(2) -indicates 0.775 Vrms 3.por… |
| 1.3.6.1.4.1.2011.6.113.1.1.1.14 | ColumnhwPstnPTPActualSendGain | read-only | current | Indicates the actual transmit gain of the port. -1: invalid value 1: 5 dB 2: 4.5 dB 3: 4 dB 4: 3.5 dB 5: 3 dB 6: 2.5 dB 7: 2 dB 8: 1.5 dB 9: 1 dB 10: 0.5 dB 11… |
| 1.3.6.1.4.1.2011.6.113.1.1.1.15 | ColumnhwPstnPTPActualRecvGain | read-only | current | Indicates the actual receive gain of the port. -1: invalid value 1: 0 dB 2: -0.5 dB 3: -1 dB 4: -1.5 dB 5: -2 dB 6: -2.5 dB 7: -3 dB 8: -3.5 dB 9: -4 dB 10: -4… |
| 1.3.6.1.4.1.2011.6.113.1.1.1.16 | ColumnhwPstnPTPConfigState | read-only | current | Indicates the configuration status of the subscriber type. 1-Not configured; 2-Configured. Options: 1.notConfigUserType(1) -not configured 2.configUserType(2) … |
| 1.3.6.1.4.1.2011.6.113.1.1.1.17 | ColumnhwPstnPTPLineLock | read-write | current | Indicates support lock port or not Options: 1.enable(1) -support the lock of the port 2.disable(2) -not support the lock of the port |
| 1.3.6.1.4.1.2011.6.113.1.1.1.18 | ColumnhwPstnPTPNlpMode | read-write | current | Indicates the Nlp mode of the port. Options: 1.normalMode(1) -indicates enable the function of non-linear process for echo control performance in default level… |
| 1.3.6.1.4.1.2011.6.113.1.1.1.19 | ColumnhwPstnPTPClipReversePole | read-write | current | Indicates whether to support the polarity-reversing pulse when Clip. Options: 1.enable(1) -support the polarity-reversing pulse 2.disable(2) -not support the p… |
| 1.3.6.1.4.1.2011.6.113.1.1.1.20 | ColumnhwPstnPTPPulsePeriodUpper | read-write | current | Indicates the upper limit of the pulse period (unit: ms). |
| 1.3.6.1.4.1.2011.6.113.1.1.1.21 | ColumnhwPstnPTPPulsePeriodLower | read-write | current | Indicates the lower limit of the pulse period Unit: ms |
| 1.3.6.1.4.1.2011.6.113.1.1.1.22 | ColumnhwPstnPTPPulseDurationUpper | read-write | current | Indicates the upper limit of the pulse duration (unit: ms). |
| 1.3.6.1.4.1.2011.6.113.1.1.1.23 | ColumnhwPstnPTPPulseDurationLower | read-write | current | Indicates the lower limit of the pulse duration (unit: ms). |
| 1.3.6.1.4.1.2011.6.113.1.1.1.24 | ColumnhwPstnPTPPulsePauseUpper | read-write | current | Indicates the upper limit of the pulse pause (unit: ms). |
| 1.3.6.1.4.1.2011.6.113.1.1.1.25 | ColumnhwPstnPTPPulsePauseLower | read-write | current | Indicates the lower limit of the pulse pause (unit: ms). |
| 1.3.6.1.4.1.2011.6.113.1.1.1.26 | ColumnhwPstnPTPProhibit | read-write | current | Indicates whether to prohibit the PSTN port. Options: 1.disable(1) -indicates that the PSTN port is unprohibited 2.enable(2) -indicates that the PSTN port is p… |
| 1.3.6.1.4.1.2011.6.113.1.1.1.27 | ColumnhwPstnPTPIdleOffhookTime | read-write | current | Indicates the caller offhook recognised time (unit: 10ms). If the subscriber's A/B lines were detected in short circuit longer than this time as a caller party… |
| 1.3.6.1.4.1.2011.6.113.1.1.1.28 | ColumnhwPstnPTPRingOffhookTime | read-write | current | Indicates the callee offhook recognised time during ringing (unit: 10ms). While the subscriber was ringing as a callee party, if the A/B lines were detected in… |
| 1.3.6.1.4.1.2011.6.113.1.1.1.29 | ColumnhwPstnPTPFskOffhookTime | read-write | current | Indicates the callee offhook recognised time during onhook data transmission (unit: 10ms). While the subscriber was called but not ringing, if the A/B lines we… |
| 1.3.6.1.4.1.2011.6.113.1.1.1.30 | ColumnhwPstnPTPCurrentAdjustFactor | read-write | current | Indicates the adjustive speed of the DC output voltage. |
| 1.3.6.1.4.1.2011.6.113.1.1.1.31 | ColumnhwPstnPTPReversePolarityEnable | read-write | current | Indicates whether to support the polarity reverse. Options: 1.reversePolarityDisable(1) -indicates the reverse polarity is disable 2.reversePolarityEnable(2) -… |
| 1.3.6.1.4.1.2011.6.113.1.1.1.32 | ColumnhwPstnPTPPartyline | read-write | current | Enables or disables party line on ports. Only two adjacent POTS ports (port IDs 2n and 2n + 1, n = 0, 1, 2...) can be combined as a party line port. Party line… |
| 1.3.6.1.4.1.2011.6.113.1.2 | TablehwPstnPTPOperTable | not-accessible | current | Indicates the operation table (management, maintenance, and status query) of the PSTN PTP layer. The index of this table is hwPstnPTPOperIndex. |
| 1.3.6.1.4.1.2011.6.113.1.2.1 | RowhwPstnPTPOperEntry | not-accessible | current | Indicates the operation table (management, maintenance, and status query) of the PSTN PTP layer. The index of this entry is hwPstnPTPOperIndex. |
| 1.3.6.1.4.1.2011.6.113.1.2.1.1 | ColumnhwPstnPTPOperIndex | not-accessible | current | Indicates the shelf/slot/port index. |
| 1.3.6.1.4.1.2011.6.113.1.2.1.2 | ColumnhwPstnPTPSrvState | read-only | current | PSTN port physic state: Options: 1.normal(1) -indicates the PSTN port physic state is normal 2.fault(2) -indicates the PSTN port physic state is fault 3.deacti… |
| 1.3.6.1.4.1.2011.6.113.1.2.1.3 | ColumnhwPstnPTPLoopBackState | read-only | current | PSTN port loop state: Options: 1.noLoop(1) -indicates the PSTN port loop state is no loop 2.remoteLoop(2) -indicates the PSTN port loop state is remote loop 3.… |
| 1.3.6.1.4.1.2011.6.113.1.2.1.4 | ColumnhwPstnPTPTestState | read-only | current | PSTN port test state: Options: 1.noTest(1) -indicates that there is no test on the PSTN port 2.test(2) -indicates that there is a test on the PSTN port |
| 1.3.6.1.4.1.2011.6.113.1.2.1.5 | ColumnhwPstnPTPAdminOper | read-write | current | Indicates the maintenance operation of the physical layer of the PSTN port. Options: 1.reset(1) -indicates the maintenance operation is reset 2.localLoop(2) -i… |
| 1.3.6.1.4.1.2011.6.113.1.2.1.6 | ColumnhwPstnPTPSrvStateChange | read-only | current | Indicates the service running status changing time of the PSTN port. |
| 1.3.6.1.4.1.2011.6.113.1.2.1.7 | ColumnhwPstnPTPLoopBackStateChange | read-only | current | Indicates the physical loopback status changing time of the PSTN port. |
| 1.3.6.1.4.1.2011.6.113.1.2.1.8 | ColumnhwPstnPTPTestStateChange | read-only | current | Indicates the physical test status changing time of the PSTN port. |
| 1.3.6.1.4.1.2011.6.113.1.2.1.9 | ColumnhwPstnPTPLicenseState | read-only | current | Indicates the service license status of the PSTN port. Options: 1.noConfigure(1) -indicates the service license status of the PSTN port is no configuration 2.n… |
| 1.3.6.1.4.1.2011.6.113.1.2.1.10 | ColumnhwPstnPTPLineState | read-only | current | PSTN port line state: Options: 1.normal(1) -indicates that the state of PSTN port line is normal 2.onEarth(2) -indicates that the state of PSTN port line on ea… |
| 1.3.6.1.4.1.2011.6.113.1.3 | TablehwBraPTPConfigTable | not-accessible | current | Indicates the physical attribute configuration table of the BRA port. The index of this table is hwBraPTPIndex. |
| 1.3.6.1.4.1.2011.6.113.1.3.1 | RowhwBraPTPConfigEntry | not-accessible | current | Indicates the physical attribute configuration table of the BRA port. The index of this entry is hwBraPTPIndex. |
| 1.3.6.1.4.1.2011.6.113.1.3.1.1 | ColumnhwBraPTPIndex | not-accessible | current | Indicates the shelf/slot/port index. |
| 1.3.6.1.4.1.2011.6.113.1.3.1.2 | ColumnhwBraPTPRPower | read-write | current | Indicates whether remote power supply is supported. 1-Not supported; 2-Supported. Options: 1.disable(1) -not support remote power supply 2.enable(2) -support r… |
| 1.3.6.1.4.1.2011.6.113.1.3.1.3 | ColumnhwBraPTPAutoDeactive | read-write | current | Indicates whether automatic deactivation is supported. 1-Not supported; 2-Supported. Options: 1.disable(1) -not support automatic deactivation 2.enable(2) -sup… |
| 1.3.6.1.4.1.2011.6.113.1.3.1.4 | ColumnhwBraPTPAutoDeactiveDelay | read-write | current | Indicates the automatic deactivation delay of the BRA (unit: second). |
| 1.3.6.1.4.1.2011.6.113.1.3.1.5 | ColumnhwBraPTPWorkMode | read-write | current | Indicates the BRA port working mode. Options: 1.p2mp(1) -indicates Point to multi-point 2.p2p(2) -indicates Point to point 3.auto(3) -indicates the adaptive ma… |
| 1.3.6.1.4.1.2011.6.113.1.3.1.6 | ColumnhwBraPTPPowerState | read-only | current | Indicates the power status of the NT1. 1-Active power supply (PS1); 2-Standby power supply (PS2). Options: 1.state1(1) -indicates PS1 is normal; PS2 is normal … |
| 1.3.6.1.4.1.2011.6.113.1.3.1.7 | ColumnhwBraPTPConfigState | read-only | current | Indicates the configuration status of the subscriber type. Options: 1.notConfigUserType(1) -not configured 2.configUserType(2) -configured |
| 1.3.6.1.4.1.2011.6.113.1.3.1.8 | ColumnhwBraPTPL1ActiveMode | read-write | current | Indicates layer 1 active mode of bra port. Options: 1.stableActive(1) -indicates the layer 1 active mode of bra port is stable active 2.unstableActive(2) -indi… |
| 1.3.6.1.4.1.2011.6.113.1.3.1.9 | ColumnhwBraPTPUniAlarmReport | read-write | current | Indicates enable user network interface fault alarm or not. Options: 1.enable(1) -indicates enable the user network interface fault alarm 2.disable(2) -indicat… |
| 1.3.6.1.4.1.2011.6.113.1.3.1.10 | ColumnhwBraPTPL2Monitor | read-write | current | Indicates enable layer 2 error statistic of bra port or not. Options: 1.disable(1) -indicates disable the layer 2 error statistic of bra port 2.enable(2) -indi… |
| 1.3.6.1.4.1.2011.6.113.1.3.1.11 | ColumnhwBraPTPActivePeriod | read-write | current | Indicates the interval of the periodical automatic activation. 0 means that periodical automatic activation is disabled (unit: minutes). |
| 1.3.6.1.4.1.2011.6.113.1.3.1.12 | ColumnhwBraPTPActualWorkMode | read-only | current | Indicates the BRA port actual working mode. Options: 1.p2mp(1) -indicates Point to multi-point 2.p2p(2) -indicates Point to point |
| 1.3.6.1.4.1.2011.6.113.1.3.1.13 | ColumnhwBraPTPNlpMode | read-write | current | Indicates the Nlp mode of the port. Options: 1.normalMode(1) -indicates enable the function of non-linear process for echo control performance in default level… |
| 1.3.6.1.4.1.2011.6.113.1.4 | TablehwBraPTPOperTable | not-accessible | current | Indicates the operation table (management, maintenance, and status query) of the BRA PTP layer. The index of this table is hwBraPTPOperIndex. |
| 1.3.6.1.4.1.2011.6.113.1.4.1 | RowhwBraPTPOperEntry | not-accessible | current | Indicates the operation table (management, maintenance, and status query) of the BRA PTP layer. The index of this entry is hwBraPTPOperIndex. |
| 1.3.6.1.4.1.2011.6.113.1.4.1.1 | ColumnhwBraPTPOperIndex | not-accessible | current | Indicates the shelf/slot/port index. |
| 1.3.6.1.4.1.2011.6.113.1.4.1.2 | ColumnhwBraPTPSrvState | read-only | current | Indicates the service running status of the BRA port. Options: 1.normal(1) -indicates the service running status of the BRA port is normal 2.fault(2) -indicate… |
| 1.3.6.1.4.1.2011.6.113.1.4.1.3 | ColumnhwBraPTPLoopBackState | read-only | current | Indicates the physical loopback status of the BRA port. Options: 1.noLoop(1) -indicates the loopback status is no loop 2.remoteLoop(2) -indicates the loopback … |
| 1.3.6.1.4.1.2011.6.113.1.4.1.4 | ColumnhwBraPTPTestState | read-only | current | Indicates the test status of the BRA port. Options: 1.noTest(1) -indicates there is no test 2.test(2) -indicates there is a test |
| 1.3.6.1.4.1.2011.6.113.1.4.1.5 | ColumnhwBraPTPAdminOper | read-write | current | Indicates the maintenance operation of the physical layer of the BRA port. Options: 1.reset(1) -indicates the maintenance operation is reset 2.localLoop(2) -in… |
| 1.3.6.1.4.1.2011.6.113.1.4.1.6 | ColumnhwBraPTPSrvStateChange | read-only | current | Indicates the service running status changing time of the BRA port. |
| 1.3.6.1.4.1.2011.6.113.1.4.1.7 | ColumnhwBraPTPLoopBackStateChange | read-only | current | Indicates the loopback status changing time of the BRA port. |
| 1.3.6.1.4.1.2011.6.113.1.4.1.8 | ColumnhwBraPTPTestStateChange | read-only | current | Indicates the test status changing time of the BRA port. |
| 1.3.6.1.4.1.2011.6.113.1.4.1.9 | ColumnhwBraPTPLicenseState | read-only | current | Indicates the service license status of the BRA port. Options: 1.noConfigure(1) -indicates the service license status is no configuration 2.noLicense(2) -indic… |
| 1.3.6.1.4.1.2011.6.113.1.4.1.10 | ColumnhwBraPTPAlarmState | read-only | current | Indicates the alarm state of bra port,from left to right,each bit represents one alarm state. Options: 1.bit0(0) -indicates LT overload 2.bit1(1) -indicates S … |
| 1.3.6.1.4.1.2011.6.113.1.5 | TablehwBRAPTPPerformanceStatTable | not-accessible | current | Indicates the performance statistics table of the BRA PTP layer. The index of this table is hwBraPTPPerforIndex. |
| 1.3.6.1.4.1.2011.6.113.1.5.1 | RowhwBRAPTPPerformanceStatEntry | not-accessible | current | Indicates the performance statistics table of the BRA PTP layer. The index of this entry is hwBraPTPPerforIndex. |
| 1.3.6.1.4.1.2011.6.113.1.5.1.1 | ColumnhwBraPTPPerforIndex | not-accessible | current | Indicates the shelf/slot/port index. |
| 1.3.6.1.4.1.2011.6.113.1.5.1.2 | ColumnhwBraPTPPerformanceStatOprType | read-write | current | Indicates the status of the performance statistics operation. Options: 1.stop(1) -indicates the status of the performance statistics operation is stop 2.start(… |
| 1.3.6.1.4.1.2011.6.113.1.5.1.3 | ColumnhwBraPTPPerformanceStatPeri | read-write | current | Indicates the performance statistics period (minute). |
| 1.3.6.1.4.1.2011.6.113.1.5.1.4 | ColumnhwBraPTPErrorcode | read-write | current | Indicates the threshold of error code (count of error code). |
| 1.3.6.1.4.1.2011.6.113.1.5.1.5 | ColumnhwBraPTPNebeUas | read-only | current | Indicates the Near End Block Error (NEBE) unavailable seconds (second). |
| 1.3.6.1.4.1.2011.6.113.1.5.1.6 | ColumnhwBraPTPFebeUas | read-only | current | Indicates the Far End Block Error (FEBE) unavailable seconds (second). |
| 1.3.6.1.4.1.2011.6.113.1.5.1.7 | ColumnhwBraPTPNebeEs | read-only | current | Indicates the NEBE errored seconds (second). |
| 1.3.6.1.4.1.2011.6.113.1.5.1.8 | ColumnhwBraPTPFebeEs | read-only | current | Indicates the FEBE errored seconds (second). |
| 1.3.6.1.4.1.2011.6.113.1.5.1.9 | ColumnhwBraPTPNebeSes | read-only | current | Indicates the NEBE severely errored seconds (second). |
| 1.3.6.1.4.1.2011.6.113.1.5.1.10 | ColumnhwBraPTPFebeSes | read-only | current | Indicates the FEBE severely errored seconds (second). |
| 1.3.6.1.4.1.2011.6.113.1.6 | TablehwE1PTPConfigTable | not-accessible | current | Indicates the configuration table (attribute configuration and query) of the E1 PTP layer. The index of this table is hwE1PTPIndex. |
| 1.3.6.1.4.1.2011.6.113.1.6.1 | RowhwE1PTPConfigEntry | not-accessible | current | Indicates the configuration table (attribute configuration and query) of the E1 PTP layer. The index of this entry is hwE1PTPIndex. |
| 1.3.6.1.4.1.2011.6.113.1.6.1.1 | ColumnhwE1PTPIndex | not-accessible | current | Indicates the shelf/slot/port index. |
| 1.3.6.1.4.1.2011.6.113.1.6.1.2 | ColumnhwE1PTPFrameVerifyMode | read-write | current | Indicates the CRC4 frame check. Options: 1.enable(1) -indicates the CRC4 frame check is enable 2.disable(2) -indicates the CRC4 frame check is disable |
| 1.3.6.1.4.1.2011.6.113.1.6.1.3 | ColumnhwE1PTPImpedance | read-write | current | Indicates the port impedance. Options: 1.ohm75(1) -indicates the port impedance is 75 ohm 2.ohm120(2) -indicates the port impedance is 120 ohm |
| 1.3.6.1.4.1.2011.6.113.1.6.1.4 | ColumnhwE1PTPSignalType | read-write | current | Indicates the signaling type. Options: 1.ccs(1) -indicates the signaling type is ccs 2.cas(2) -indicates the signaling type is cas 3.unframe(3) -indicates the … |
| 1.3.6.1.4.1.2011.6.113.1.6.1.5 | ColumnhwE1PTPConfigState | read-only | current | Indicates the configuration status of the subscriber type. Options: 1.notConfigUserType(1) -not configured 2.configVoiceUserType(2) -configured MG PRA subscrib… |
| 1.3.6.1.4.1.2011.6.113.1.6.1.6 | ColumnhwE1PTPAccessDSMode | read-write | current | Indicates physical layer digital section access mode of e1 port,default:digitalAccess(1). Options: 1.digitalAccess(1) -digital access 2.directAccess(2) -direct… |
| 1.3.6.1.4.1.2011.6.113.1.6.1.7 | ColumnhwE1PTPErrAlarmSet | read-write | current | Indicates set e1 error alarm switch,from left to right,each bit respresent a switch,default:111000 Options: 1.bit0(0) -indicates report pcm line fault alarm 2.… |
| 1.3.6.1.4.1.2011.6.113.1.6.1.8 | ColumnhwE1PTPL2Monitor | read-write | current | enable layer 2 error statistic of e1 port or not,default:enable(2). Options: 1.disable(1) -indicates the layer 2 error statistic of e1 port is disable 2.enable… |
| 1.3.6.1.4.1.2011.6.113.1.6.1.9 | ColumnhwE1PTPLineCode | read-write | current | line code of e1 port,default:hdb3(1). Options: 1.hdb3(1) -indicates the line code of e1 port is hdb3 2.ami(2) -indicates the line code of e1 port is ami |
| 1.3.6.1.4.1.2011.6.113.1.7 | TablehwE1PTPOperTable | not-accessible | current | Indicates the operation table (management, maintenance, and status query) of the E1 PTP layer. The index of this table is hwE1PTPOperIndex. |
| 1.3.6.1.4.1.2011.6.113.1.7.1 | RowhwE1PTPOperEntry | not-accessible | current | Indicates the operation table (management, maintenance, and status query) of the E1 PTP layer. The index of this entry is hwE1PTPOperIndex. |
| 1.3.6.1.4.1.2011.6.113.1.7.1.1 | ColumnhwE1PTPOperIndex | not-accessible | current | Indicates the shelf/slot/port index. |
| 1.3.6.1.4.1.2011.6.113.1.7.1.2 | ColumnhwE1PTPSrvState | read-only | current | Indicates the service running status of the E1 port. Options: 1.normal(1) -indicates the service running status of e1 port is normal 2.fault(2) -indicates the … |
| 1.3.6.1.4.1.2011.6.113.1.7.1.3 | ColumnhwE1PTPLoopBackState | read-only | current | Indicates the physical loopback status of the E1 port. Options: 1.noLoop(1) -indicates the loopback status of e1 port is no loop 2.remoteLoop(2) -indicates the… |
| 1.3.6.1.4.1.2011.6.113.1.7.1.4 | ColumnhwE1PTPAdminOper | read-write | current | Indicates the maintenance operation of the physical layer of the E1 port. Options: 1.reset(1) -indicates the maintenance operation of e1 port is no reset 2.loc… |
| 1.3.6.1.4.1.2011.6.113.1.7.1.5 | ColumnhwE1PTPWarningState | read-only | current | Indicates the alarm status of the E1 line. Bit0: LOS (0: no LOS alarm; 1: LOS alarm occurs) Bit1: AIS (0: no AIS alarm; 1: AIS alarm occurs) Bit2: LFA (0: no L… |
| 1.3.6.1.4.1.2011.6.113.1.7.1.9 | ColumnhwE1PTPLicenseState | read-only | current | Indicates the service license status of the E1 port. Options: 1.noConfigure(1) -indicates the service license status of the E1 port is no configuration 2.noLic… |
| 1.3.6.1.4.1.2011.6.113.1.8 | TablehwGTCOperateTable | not-accessible | current | Indicates the GTC operation table (test control). The index of this table is hwGTCIndex. |
| 1.3.6.1.4.1.2011.6.113.1.8.1 | RowhwGTCOperateEntry | not-accessible | current | Indicates the GTC operation table (test control). The index of this entry is hwGTCIndex. |
| 1.3.6.1.4.1.2011.6.113.1.8.1.1 | ColumnhwGTCIndex | not-accessible | current | Indicates the GTC test index. |
| 1.3.6.1.4.1.2011.6.113.1.8.1.2 | ColumnhwGTCTimer | read-write | current | Indicates the value of the GTC test timer. The system automatically stops the GTC test when the timer times out (unit: second).When the command for starting a … |
| 1.3.6.1.4.1.2011.6.113.1.8.1.3 | ColumnhwGTCOperate | read-write | current | Options: 1.undertest(1) -indicates Start the GTC test 2.finishtest(2) -indicates Stop the GTC test 3.invalidvalue(-1) -indicates an invalid value |
| 1.3.6.1.4.1.2011.6.113.1.9 | TablehwUserDefineRingTypeTable | not-accessible | current | Indicates the user-defined ring type table. The index of this table is hwUserDefineRingType. |
| 1.3.6.1.4.1.2011.6.113.1.9.1 | RowhwUserDefineRingTypeEntry | not-accessible | current | Indicates the user-defined ring type table. The index of this entry is hwUserDefineRingType. |
| 1.3.6.1.4.1.2011.6.113.1.9.1.1 | ColumnhwUserDefineRingType | not-accessible | current | Index of ring type |
| 1.3.6.1.4.1.2011.6.113.1.9.1.2 | ColumnhwUserDefineRingPara1 | read-write | current | The first ring time length(>=100 and <= 12750, 0 means to cancel parameter value)(millisecond) |
| 1.3.6.1.4.1.2011.6.113.1.9.1.3 | ColumnhwUserDefineRingPara2 | read-write | current | The first silent time length(>=100 and <= 12750, 0 means to cancel parameter value)(millisecond) |
| 1.3.6.1.4.1.2011.6.113.1.9.1.4 | ColumnhwUserDefineRingPara3 | read-write | current | The second ring time length(>=100 and <= 12750, 0 means to cancel parameter value)(millisecond) |
| 1.3.6.1.4.1.2011.6.113.1.9.1.5 | ColumnhwUserDefineRingPara4 | read-write | current | The second silent time length(>=100 and <= 12750,0 means to cancel parameter value)(millisecond) |
| 1.3.6.1.4.1.2011.6.113.1.9.1.6 | ColumnhwUserDefineRingPara5 | read-write | current | The third ring time length(>=100 and <= 12750,0 means to cancel parameter value)(millisecond) |
| 1.3.6.1.4.1.2011.6.113.1.9.1.7 | ColumnhwUserDefineRingPara6 | read-write | current | The third silent time length(>=100 and <= 12750,0 means to cancel parameter value)(millisecond) |
| 1.3.6.1.4.1.2011.6.113.1.10 | NodehwPortDataTrapSequence | |||
| 1.3.6.1.4.1.2011.6.113.1.10.1 | ScalarhwPstnPortDataTrapSequence | read-only | current | Indicates that the Trap sequence is reported after the PSTN port data changes. |
| 1.3.6.1.4.1.2011.6.113.1.10.2 | ScalarhwBraPortDataChangeSequence | read-only | current | Indicates that the Trap sequence is reported after the BRA port data changes. |
| 1.3.6.1.4.1.2011.6.113.1.10.3 | ScalarhwE1PortDataChangeSequence | read-only | current | Indicates that the Trap sequence is reported after the E1 port data changes. |
| 1.3.6.1.4.1.2011.6.113.1.11 | TablehwPstnPortStateStatisticTable | not-accessible | current | Indicates the PSTN port status mapping table. The indexes of this table are hwPstnPTPFrameIndex and hwPstnPTPSlotIndex. |
| 1.3.6.1.4.1.2011.6.113.1.11.1 | RowhwPstnPortStateStatisticEntry | not-accessible | current | Indicates the PSTN port status mapping table. The indexes of this entry are hwPstnPTPFrameIndex and hwPstnPTPSlotIndex. |
| 1.3.6.1.4.1.2011.6.113.1.11.1.1 | ColumnhwPstnPTPFrameIndex | not-accessible | current | Indicates the shelf index. |
| 1.3.6.1.4.1.2011.6.113.1.11.1.2 | ColumnhwPstnPTPSlotIndex | not-accessible | current | Indicates the slot index. |
| 1.3.6.1.4.1.2011.6.113.1.11.1.3 | ColumnhwPstnBoardPortNumber | read-only | current | Indicates the total number of ports on the specified PSTN service board. |
| 1.3.6.1.4.1.2011.6.113.1.11.1.4 | ColumnhwPstnPTPSrvStateBitmapList | read-only | current | Indicates the bit mapping table of the service running status of all the PSTN ports of the specified board (the status table consists of variable-length charac… |
| 1.3.6.1.4.1.2011.6.113.1.11.1.5 | ColumnhwPstnPTPLoopBackStateBitmapList | read-only | current | Indicates the bit mapping table of the physical loopback status of all the PSTN ports of the specified board (the status table consists of variable-length char… |
| 1.3.6.1.4.1.2011.6.113.1.11.1.6 | ColumnhwPstnPTPTestStateBitmapList | read-only | current | Indicates the bit mapping table of the physical test status of all the PSTN ports of the specified board (the status table consists of variable-length characte… |
| 1.3.6.1.4.1.2011.6.113.1.12 | TablehwBraPortStateStatisticTable | not-accessible | current | Indicates the BRA port status mapping table. The indexes of this table are hwBraPTPFrameIndex and hwBraPTPSlotIndex. |
| 1.3.6.1.4.1.2011.6.113.1.12.1 | RowhwBraPortStateStatisticEntry | not-accessible | current | Indicates the BRA port status mapping table. The indexes of this entry are hwBraPTPFrameIndex and hwBraPTPSlotIndex. |
| 1.3.6.1.4.1.2011.6.113.1.12.1.1 | ColumnhwBraPTPFrameIndex | not-accessible | current | Indicates the shelf index. |
| 1.3.6.1.4.1.2011.6.113.1.12.1.2 | ColumnhwBraPTPSlotIndex | not-accessible | current | Indicates the slot index. |
| 1.3.6.1.4.1.2011.6.113.1.12.1.3 | ColumnhwBraBoardPortNumber | read-only | current | Indicates the total number of ports on the specified BRA service board. |
| 1.3.6.1.4.1.2011.6.113.1.12.1.4 | ColumnhwBraPTPSrvStateBitmapLists | read-only | current | Indicates the bit mapping table of the service running status of all the BRA ports of the specified board (the status table consists of variable-length charact… |
| 1.3.6.1.4.1.2011.6.113.1.12.1.5 | ColumnhwBraPTPLoopBackStateBitmapLists | read-only | current | Indicates the bit mapping table of the physical loopback status of all the BRA ports of the specified board (the status table consists of variable-length chara… |
| 1.3.6.1.4.1.2011.6.113.1.12.1.6 | ColumnhwBraPTPTestStateBitmapList | read-only | current | Indicates the bit mapping table of the physical test status of all the BRA ports of the specified board (the status table consists of variable-length character… |
| 1.3.6.1.4.1.2011.6.113.1.13 | TablehwE1PTPL1AlarmThresholdTable | not-accessible | current | degrade alarm threshold config table of e1 port layer 1 The index of this table is hwE1PTPAlarmIndex. |
| 1.3.6.1.4.1.2011.6.113.1.13.1 | RowhwE1PTPL1AlarmThresholdEntry | not-accessible | current | degrade alarm threshold config table of e1 port layer 1 The index of this entry is hwE1PTPAlarmIndex. |
| 1.3.6.1.4.1.2011.6.113.1.13.1.1 | ColumnhwE1PTPAlarmIndex | not-accessible | current | Indicates the shelf/slot/port index. |
| 1.3.6.1.4.1.2011.6.113.1.13.1.2 | ColumnhwE1PTPDMAlarmThreshold | read-write | current | Indicates degrade minute alarm threshold, default:8. |
| 1.3.6.1.4.1.2011.6.113.1.13.1.3 | ColumnhwE1PTPESAlarmThreshold | read-write | current | Indicates error second alarm threshold, default:432. |
| 1.3.6.1.4.1.2011.6.113.1.13.1.4 | ColumnhwE1PTPSESAlarmThreshold | read-write | current | Indicates sequential severe error second alarm threshold, default:4. |
| 1.3.6.1.4.1.2011.6.113.1.13.1.5 | ColumnhwE1PTPDegradeEndService | read-write | current | Whether port goes out of service when line quality gets worse. Options: 1.enable(1) -indicates port goes out of service 2.disable(2) -indicates port does not g… |
| 1.3.6.1.4.1.2011.6.113.1.14 | TablehwISDNPTPL2AlarmThresholdTable | not-accessible | current | Indicates layer 2 signal error alarm threshold config table of ISDN(BRA/PRA) port. The index of this table is hwIsdnPTPIndex. |
| 1.3.6.1.4.1.2011.6.113.1.14.1 | RowhwISDNPTPL2AlarmThresholdEntry | not-accessible | current | Indicates layer 2 signal error alarm threshold config table of ISDN(BRA/PRA) port. The index of this entry is hwIsdnPTPIndex. |
| 1.3.6.1.4.1.2011.6.113.1.14.1.1 | ColumnhwIsdnPTPIndex | not-accessible | current | Indicates the shelf/slot/port index. |
| 1.3.6.1.4.1.2011.6.113.1.14.1.2 | ColumnhwIsdnL2DAUnexpectRespondThreshold | read-write | current | Indicates threshold of unexpected response alarm threshold,default :0, 0 means does not report alarm. |
| 1.3.6.1.4.1.2011.6.113.1.14.1.3 | ColumnhwIsdnL2DARebuiltLinkRequestThreshold | read-write | current | Indicates threshold of peer initiated re-establishments when in multiple frame established state, default:0, 0 means does not report alarm. |
| 1.3.6.1.4.1.2011.6.113.1.14.1.4 | ColumnhwIsdnL2DAN200OutTimeThreshold | read-write | current | Indicates threshold of unsuccessful re-transmissions n200 times, default:0, 0 means does not report alarm. |
| 1.3.6.1.4.1.2011.6.113.1.14.1.5 | ColumnhwIsdnL2DAQ921AddrDomainErrThreshold | read-write | current | Indicates threshold of Q.921 address field errors, default:0, 0 means does not report alarm. |
| 1.3.6.1.4.1.2011.6.113.1.14.1.6 | ColumnhwIsdnL2DAMDLERRJToOThreshold | read-write | current | Indicates threshold of Q.921 general protocol errors: MDL errors J to O : ETS.300.125, default:0, 0 means does not report alarm. |
| 1.3.6.1.4.1.2011.6.113.1.14.1.7 | ColumnhwIsdnL2DAFrameSNErrThreshold | read-write | current | Indicates threshold of frame check sequence errors : for Q.921, default:0, 0 means does not report alarm. |
| 1.3.6.1.4.1.2011.6.113.1.14.1.8 | ColumnhwIsdnL2DABufferOverFlowThreshold | read-write | current | Indicates threshold of buffer overflows, applies to Q.921, default:0, 0 means does not report alarm. |
| 1.3.6.1.4.1.2011.6.113.1.15 | TablehwFxoPTPConfigTable | not-accessible | current | Indicates A list of hwFxoPTPConfigTable objects. The index of this table is hwFxoPTPIndex |
| 1.3.6.1.4.1.2011.6.113.1.15.1 | RowhwFxoPTPConfigEntry | not-accessible | current | Indicates A list of hwFxoPTPConfigTable objects. The index of this entry is hwFxoPTPIndex |
| 1.3.6.1.4.1.2011.6.113.1.15.1.1 | ColumnhwFxoPTPIndex | not-accessible | current | Indicates the frame/slot/port index. |
| 1.3.6.1.4.1.2011.6.113.1.15.1.2 | ColumnhwFxoPTPSendVoiceGain | read-write | current | Indicates the Fxo board send voice gain. 0: -7.5dB, 1: -7.0dB, 2: -6.5dB, 3: -6.0dB, 4: -5.5dB, 5: -5.0dB, 6: -4.5dB, 7: -4.0dB, 8: -3.5dB, 9: -3.0dB, 10: -2.5… |
| 1.3.6.1.4.1.2011.6.113.1.15.1.3 | ColumnhwFxoPTPRecvVoiceGain | read-write | current | Indicates the Fxo board receive voice gain. 0: -16.0dB, 1: -15.5dB, 2: -15.0dB, 3: -14.5dB, 4: -14.0dB, 5: -13.5dB, 6: -13.0dB, 7: -12.5dB, 8: -12.0dB, 9: -11.… |
| 1.3.6.1.4.1.2011.6.113.1.15.1.4 | ColumnhwFxoPTPDCImpedance | read-write | current | Indicates the DC Impedance. 0: 50 1: 800 (unit: ohm) |
| 1.3.6.1.4.1.2011.6.113.1.15.1.5 | ColumnhwFxoPTPACImpedance | read-write | current | Indicates the AC Impedance. 0: 600 1: 900 2: 270 + (750 || 150 nF) and 275 + (780 || 150 nF) 3: 220 + (820 || 120 nF) and 220 + (820 || 115 nF) 4: 370 + (620 |… |
| 1.3.6.1.4.1.2011.6.113.1.15.1.6 | ColumnhwFxoPTPRingMinOntime | read-write | current | Indicates the min ontime for ringing detect. 0: 100 ms 1: 150 ms 2: 200 ms 3: 256 ms 4: 384 ms 5: 512 ms 6: 640 ms 7: 1024 ms |
| 1.3.6.1.4.1.2011.6.113.1.15.1.7 | ColumnhwFxoPTPRingMaxOfftime | read-write | current | Indicates the threshold for ringing disappear.(unit: s) |
| 1.3.6.1.4.1.2011.6.113.1.15.1.8 | ColumnhwFxoPTPRingFrequence | read-write | current | Indicates the ring frequence. 0: 16Hz, 1: 25Hz, 2: 50Hz, 3: 20Hz |
| 1.3.6.1.4.1.2011.6.113.1.15.1.9 | ColumnhwFxoPTPRingACAmplitude | read-write | current | Indicates the ring of the AC amplitude. 0: 20Vrms, 1: 30Vrms, 2: 50Vrms |
| 1.3.6.1.4.1.2011.6.113.1.15.1.10 | ColumnhwFxoPTPRingOffset | read-write | current | Indicates the ring offset. |
| 1.3.6.1.4.1.2011.6.113.1.15.1.11 | ColumnhwFxoPTPFeedMaxVol | read-write | current | Indicates the max of the PTP feed voltage. 0: -30V, 1: -35V, 2: -40V 3: -45V, 4: -50V 5: -55V |
| 1.3.6.1.4.1.2011.6.113.1.15.1.12 | ColumnhwFxoPTPFeedMinVol | read-write | current | Indicates the min of the PTP feed voltage. 0: -50V, 1: -55V, 2: -60V 3: -65V, 4: -70V 5: -75V 6: -80V |
| 1.3.6.1.4.1.2011.6.113.1.15.1.13 | ColumnhwFxoPTPFeedMaxCurrent | read-write | current | Indicates the max of the PTP feed current. 0: 25mA 1: 30mA 2: 35mA 3: 40mA 4: 45mA 5: 50mA 6: 55mA 7: 60mA 8: 65mA 9: 70mA |
| 1.3.6.1.4.1.2011.6.113.1.15.1.14 | ColumnhwFxoPTPFeedMinCurrent | read-write | current | Indicates the min of the PTP feed current. 0: 16mA 1: 17mA 2: 18mA 3: 19mA 4: 20mA |
| 1.3.6.1.4.1.2011.6.113.1.16 | TablehwFxoPTPOperateTable | not-accessible | current | A list of HwFxoPTPOperateEntry objects. The index of this table is hwFxoPTPOperIndex. |
| 1.3.6.1.4.1.2011.6.113.1.16.1 | RowhwFxoPTPOperateEntry | not-accessible | current | A list of HwFxoPTPOperateEntry objects. The index of this entry is hwFxoPTPOperIndex. |
| 1.3.6.1.4.1.2011.6.113.1.16.1.1 | ColumnhwFxoPTPOperIndex | not-accessible | current | Indicates the frame/slot/port index. |
| 1.3.6.1.4.1.2011.6.113.1.16.1.2 | ColumnhwFxoPTPSrvState | read-only | current | Indicates the state of port. Options: 1.normal(1) -indicates the state of port is normal 2.fault(2) -indicates the state of port is fault |
| 1.3.6.1.4.1.2011.6.113.1.16.1.3 | ColumnhwFxoPTPLoopBackState | read-only | current | FXO port loop state: Options: 1.noLoop(1) -indicates the FXO port loop state is no loop 2.remoteLoop(2) -indicates the FXO port loop state is remote loop 3.loc… |
| 1.3.6.1.4.1.2011.6.113.1.16.1.4 | ColumnhwFxoPTPAdminOper | read-write | current | Indicates the operate type. Options: 1.reset(1) -indicates the operate type is no reset 2.localLoop(2) -indicates the operate type is local loop 3.remoteLoop(3… |
| 1.3.6.1.4.1.2011.6.113.1.16.1.5 | ColumnhwFxoPTPPowerState | read-only | current | Indicates the power state. Options: 1.normal(1) -indicates normal power feed 2.abnormal(2) -indicates no power feed |
| 1.3.6.1.4.1.2011.6.113.1.17 | TablehwShdslPTPConfigTable | not-accessible | current | Indicates the configuration table (attribute configuration and query) of the Shdsl PTP layer. The index of this table is hwShdslPTPIndex. |
| 1.3.6.1.4.1.2011.6.113.1.17.1 | RowhwShdslPTPConfigEntry | not-accessible | current | Indicates the configuration table (attribute configuration and query) of the Shdsl PTP layer. The index of this entry is hwShdslPTPIndex. |
| 1.3.6.1.4.1.2011.6.113.1.17.1.1 | ColumnhwShdslPTPIndex | not-accessible | current | Indicates the shelf/slot/port index. |
| 1.3.6.1.4.1.2011.6.113.1.17.1.2 | ColumnhwShdslPTPFrameVerifyMode | read-write | current | Indicates the CRC4 frame check. Options: 1.enable(1) -indicates the CRC4 frame check is enable 2.disable(2) -indicates the CRC4 frame check is disable |
| 1.3.6.1.4.1.2011.6.113.1.17.1.3 | ColumnhwShdslPTPSignalType | read-write | current | Indicates the signaling type. Options: 1.ccs(1) -indicates the signaling type is ccs 2.cas(2) -indicates the signaling type is cas 3.unframe(3) -indicates the … |
| 1.3.6.1.4.1.2011.6.113.1.17.1.4 | ColumnhwShdslPTPConfigState | read-only | current | Indicates the configuration status of the subscriber type. Options: 1.notconfigUserType(1) -not configured 2.configUserType(2) -configured |
| 1.3.6.1.4.1.2011.6.113.1.17.1.5 | ColumnhwShdslPTPErrAlarmSet | read-write | current | Indicates set Shdsl error alarm switch,from left to right,each bit respresent a switch,default:111000. Options: 1.bit0(0) -indicates report pcm line fault alar… |
| 1.3.6.1.4.1.2011.6.113.1.17.1.6 | ColumnhwShdslPTPL2Monitor | read-write | current | enable layer 2 error statistic of shdsl port or not,default:enable(2). Options: 1.disable(1) -disable the layer 2 error statistic of shdsl port 2.enable(2) -en… |
| 1.3.6.1.4.1.2011.6.113.1.18 | TablehwShdslPTPOperTable | not-accessible | current | Indicates the operation table (management, maintenance, and status query) of the Shdsl PTP layer. The index of this table is hwShdslPTPOperIndex. |
| 1.3.6.1.4.1.2011.6.113.1.18.1 | RowhwShdslPTPOperEntry | not-accessible | current | Indicates the operation table (management, maintenance, and status query) of the Shdsl PTP layer. The index of this entry is hwShdslPTPOperIndex. |
| 1.3.6.1.4.1.2011.6.113.1.18.1.1 | ColumnhwShdslPTPOperIndex | not-accessible | current | Indicates the shelf/slot/port index. |
| 1.3.6.1.4.1.2011.6.113.1.18.1.2 | ColumnhwShdslPTPSrvState | read-only | current | Indicates the service running status of the Shdsl port. Options: 1.normal(1) -indicates the service running status of Shdsl port is normal 2.fault(2) -indicate… |
| 1.3.6.1.4.1.2011.6.113.1.18.1.3 | ColumnhwShdslPTPWarningState | read-only | current | Indicates the alarm status of the Shdsl line. Bit0: LOS (0: no LOS alarm; 1: LOS alarm occurs) Bit1: AIS (0: no AIS alarm; 1: AIS alarm occurs) Bit2: LFA (0: n… |
| 1.3.6.1.4.1.2011.6.113.1.18.1.4 | ColumnhwShdslPTPLicenseState | read-only | current | Indicates the service license status of the Shdsl port. Options: 1.noconfigure(1) -indicates the service license status of the Shdsl port is no configuration 2… |
| 1.3.6.1.4.1.2011.6.113.1.19 | TablehwPotsBoardToneDefineTable | not-accessible | current | The index of this table is hwPotsBoardToneType. PstnBoard pots signal tone config table. |
| 1.3.6.1.4.1.2011.6.113.1.19.1 | RowhwPotsBoardToneDefineEntry | not-accessible | current | The index of this entry is hwPotsBoardToneType. PstnBoard pots signal tone config table. |
| 1.3.6.1.4.1.2011.6.113.1.19.1.1 | ColumnhwPotsBoardToneType | read-write | current | Indicates the tone type of signal tone. Options: 1. busytone(1) -Indicate the tone type |
| 1.3.6.1.4.1.2011.6.113.1.19.1.2 | ColumnhwPotsBoardToneFreq1 | read-write | current | Indicates the first frequency of signal tone.(Unit:Hz) |
| 1.3.6.1.4.1.2011.6.113.1.19.1.3 | ColumnhwPotsBoardToneFreq2 | read-write | current | Indicates the second frequency of signal tone.(Unit:Hz) |
| 1.3.6.1.4.1.2011.6.113.1.19.1.4 | ColumnhwPotsBoardToneOnTime | read-write | current | Indicates the on-time of signal tone. (Unit:ms) |
| 1.3.6.1.4.1.2011.6.113.1.19.1.5 | ColumnhwPotsBoardToneOffTime | read-write | current | Indicates the off-time of signal tone. (Unit:ms) |
| 1.3.6.1.4.1.2011.6.113.1.19.1.6 | ColumnhwPotsBoardToneLevel | read-write | current | Indicates the level of signal tone. (Unit:-1dBm0) |
| 1.3.6.1.4.1.2011.6.113.1.20 | TablehwShdslPTPL1AlarmThresholdTable | not-accessible | current | degrade alarm threshold config table of e1 port layer 1 The index of this table is hwE1PTPAlarmIndex. |
| 1.3.6.1.4.1.2011.6.113.1.20.1 | RowhwShdslPTPL1AlarmThresholdEntry | not-accessible | current | degrade alarm threshold config table of e1 port layer 1 The index of this entry is hwE1PTPAlarmIndex. |
| 1.3.6.1.4.1.2011.6.113.1.20.1.1 | ColumnhwShdslPTPAlarmIndex | not-accessible | current | Indicates the shelf/slot/port index. |
| 1.3.6.1.4.1.2011.6.113.1.20.1.2 | ColumnhwShdslPTPDMAlarmThreshold | read-write | current | Indicates degrade minute alarm threshold, default:8. |
| 1.3.6.1.4.1.2011.6.113.1.20.1.3 | ColumnhwShdslPTPESAlarmThreshold | read-write | current | Indicates error second alarm threshold, default:432. |
| 1.3.6.1.4.1.2011.6.113.1.20.1.4 | ColumnhwShdslPTPSESAlarmThreshold | read-write | current | Indicates sequential severe error second alarm threshold, default:4. |
| 1.3.6.1.4.1.2011.6.113.1.20.1.5 | ColumnhwShdslPTPDegradeEndService | read-write | current | Whether port goes out of service when line quality gets worse. Options: 1.enable(1) -indicates port goes out of service 2.disable(2) -indicates port does not g… |
| 1.3.6.1.4.1.2011.6.113.2 | NodehwIASVoicePortTrapsVbOids | |||
| 1.3.6.1.4.1.2011.6.113.2.1 | ScalarhwVoicePTPFrame | accessible-for-notify | current | Indicate the frame ID. |
| 1.3.6.1.4.1.2011.6.113.2.2 | ScalarhwVoicePTPSlot | accessible-for-notify | current | Indicate the slot ID. |
| 1.3.6.1.4.1.2011.6.113.2.3 | ScalarhwVoicePTPPort | accessible-for-notify | current | Indicate the port ID. |
| 1.3.6.1.4.1.2011.6.113.2.4 | ScalarhwVoicePortGtcStatus | accessible-for-notify | current | The GTC test status. Options: 1. reserve(0) -reserve 2. timeoutFinish(1) -indicates the GTC test finish whit result of time out 3. startserviceFinish(2) -indic… |
| 1.3.6.1.4.1.2011.6.113.2.5 | ScalarhwVoicePortSequence | accessible-for-notify | current | The trap's sequence number. |
| 1.3.6.1.4.1.2011.6.113.2.6 | ScalarhwVoicePortOperateType | accessible-for-notify | current | The operate type of data change. |
| 1.3.6.1.4.1.2011.6.113.2.7 | ScalarhwVoicePortNum | accessible-for-notify | current | The port number of data change. |
| 1.3.6.1.4.1.2011.6.113.2.8 | ScalarhwPortMask | accessible-for-notify | current | The mask of the changed port. |
| 1.3.6.1.4.1.2011.6.113.2.9 | ScalarhwAttributeMask | accessible-for-notify | current | The mask of the changed Attribute. |
| 1.3.6.1.4.1.2011.6.113.2.10 | ScalarhwChangepara1 | accessible-for-notify | current | The change value. |
| 1.3.6.1.4.1.2011.6.113.2.11 | ScalarhwChangepara2 | accessible-for-notify | current | The change value. |
| 1.3.6.1.4.1.2011.6.113.2.12 | ScalarhwChangepara3 | accessible-for-notify | current | The change value. |
| 1.3.6.1.4.1.2011.6.113.2.13 | ScalarhwChangepara4 | accessible-for-notify | current | The change value. |
| 1.3.6.1.4.1.2011.6.113.2.14 | ScalarhwChangepara5 | accessible-for-notify | current | The change value. |
| 1.3.6.1.4.1.2011.6.113.2.15 | ScalarhwChangepara6 | accessible-for-notify | current | The change value. |
| 1.3.6.1.4.1.2011.6.113.2.16 | ScalarhwChangepara7 | accessible-for-notify | current | The change value. |
| 1.3.6.1.4.1.2011.6.113.2.17 | ScalarhwChangepara8 | accessible-for-notify | current | The change value. |
| 1.3.6.1.4.1.2011.6.113.2.18 | ScalarhwChangepara9 | accessible-for-notify | current | The change value. |
| 1.3.6.1.4.1.2011.6.113.2.19 | ScalarhwChangepara10 | accessible-for-notify | current | The change value. |
| 1.3.6.1.4.1.2011.6.113.2.20 | ScalarhwChangepara11 | accessible-for-notify | current | The change value. |
| 1.3.6.1.4.1.2011.6.113.2.21 | ScalarhwChangepara12 | accessible-for-notify | current | The change value. |
| 1.3.6.1.4.1.2011.6.113.2.22 | ScalarhwChangepara13 | accessible-for-notify | current | The change value. |
| 1.3.6.1.4.1.2011.6.113.2.23 | ScalarhwChangepara14 | accessible-for-notify | current | The change value. |
| 1.3.6.1.4.1.2011.6.113.2.24 | ScalarhwChangepara15 | accessible-for-notify | current | The change value. |
| 1.3.6.1.4.1.2011.6.113.2.25 | ScalarhwChangepara16 | accessible-for-notify | current | The change value. |
| 1.3.6.1.4.1.2011.6.113.3 | NodehwIASVoicePortTraps | |||
| 1.3.6.1.4.1.2011.6.113.3.1 | NodehwIASVoicePortCommonTraps | |||
| 1.3.6.1.4.1.2011.6.113.3.1.1 | NodehwIASVoicePortComTraps | |||
| 1.3.6.1.4.1.2011.6.113.3.1.1.0 | NodehwIASVoicePortGtcFinishTraps | |||
| 1.3.6.1.4.1.2011.6.113.3.1.1.0.1 | NotificationhwIASVoicePortGtcFinishTrap | current | The trap indicates that the GTC test is finished cause of time-out or user start service. | |
| 1.3.6.1.4.1.2011.6.113.3.1.2 | NodehwIASVoicePortPstnTraps | |||
| 1.3.6.1.4.1.2011.6.113.3.1.2.0 | NodehwIASVoicePortPstnAttributeTraps | |||
| 1.3.6.1.4.1.2011.6.113.3.1.2.0.1 | NotificationhwIASVoicePortPstnTrap | current | The Trap indicates that the PSTN port attribute configuratinon was changed. | |
| 1.3.6.1.4.1.2011.6.113.3.1.3 | NodehwIASVoicePortBraTraps | |||
| 1.3.6.1.4.1.2011.6.113.3.1.3.0 | NodehwIASVoicePortBraAttributeTraps | |||
| 1.3.6.1.4.1.2011.6.113.3.1.3.0.1 | NotificationhwIASVoicePortBraTrap | current | The Trap indicates that the BRA port attribute configuratinon was changed. | |
| 1.3.6.1.4.1.2011.6.113.3.1.4 | NodehwIASVoicePortE1Traps | |||
| 1.3.6.1.4.1.2011.6.113.3.1.4.0 | NodehwIASVoicePortE1AttributeTraps | |||
| 1.3.6.1.4.1.2011.6.113.3.1.4.0.1 | NotificationhwIASVoicePortE1Trap | current | The Trap indicates that the E1 port attribute configuratinon was changed. | |
| 1.3.6.1.4.1.2011.6.113.3.1.4.0.2 | NotificationhwIASVoicePortE1AttributeCfgChgTrap | current | The Trap indicates that the E1 port attribute configuratinon was changed. | |
| 1.3.6.1.4.1.2011.6.113.3.1.4.0.3 | NotificationhwIASVoicePortE1AlarmCfgChgTrap | current | The Trap indicates that the E1 and Shdsl port alarm configuratinon was changed. | |
| 1.3.6.1.4.1.2011.6.113.3.1.4.0.4 | NotificationhwIASVoicePortShdslAttributeChgTrap | current | The Trap indicates that the Shdsl port attribute configuratinon was changed. | |
| 1.3.6.1.4.1.2011.6.113.3.1.5 | NodehwIASVoicePortIsdnL2Traps | |||
| 1.3.6.1.4.1.2011.6.113.3.2 | NodehwIASVoicePortAlarmTraps | |||
| 1.3.6.1.4.1.2011.6.113.3.2.1 | NodehwIASVoicePortComAlarmTraps | |||
| 1.3.6.1.4.1.2011.6.113.3.2.2 | NodehwIASVoicePortPstnAlarmTraps | |||
| 1.3.6.1.4.1.2011.6.113.3.2.2.0 | NodehwIASVoicePortPstnStateAlarmTraps | |||
| 1.3.6.1.4.1.2011.6.113.3.2.2.0.1 | NotificationhwIASVoicePortPstnLineFaultTrap | current | The trap indicates that user line fault. | |
| 1.3.6.1.4.1.2011.6.113.3.2.2.0.2 | NotificationhwIASVoicePortPstnLinenormalTrap | current | The trap indicates that user line normal. | |
| 1.3.6.1.4.1.2011.6.113.3.2.2.0.3 | NotificationhwVoicePstnBoardSlicLockedTrap | current | The trap indicates that the slic of the board is locked. | |
| 1.3.6.1.4.1.2011.6.113.3.2.2.0.4 | NotificationhwVoicePstnBoardSlicUnlockedTrap | current | The trap indicates that the slic of the board is unlocked. | |
| 1.3.6.1.4.1.2011.6.113.3.2.2.0.5 | NotificationhwVoicePstnPortPowerAlarmTrap | current | The trap indicates that A/B line has touch power line over 80V . | |
| 1.3.6.1.4.1.2011.6.113.3.2.2.0.6 | NotificationhwVoicePstnPortPowerAlarmRestoreTrap | current | The trap indicates that A/B line power normal. | |
| 1.3.6.1.4.1.2011.6.113.3.2.3 | NodehwIASVoicePortBraAlarmTraps | |||
| 1.3.6.1.4.1.2011.6.113.3.2.3.0 | NodehwIASVoicePortBraStateAlarmTraps | |||
| 1.3.6.1.4.1.2011.6.113.3.2.3.0.1 | NotificationhwIASVoicePortBraUniFaultTrap | current | The trap indicates that the physical line of the BRA port fails. | |
| 1.3.6.1.4.1.2011.6.113.3.2.3.0.2 | NotificationhwIASVoicePortBraUniResumeTrap | current | The trap indicates that BRA port Line Fault Alarm Clear. | |
| 1.3.6.1.4.1.2011.6.113.3.2.3.0.3 | NotificationhwIASVoicePortBraDegradeTrap | current | The trap indicates that the number of CRC errors on the BRA port reaches the degraded threshold. | |
| 1.3.6.1.4.1.2011.6.113.3.2.3.0.4 | NotificationhwIASVoicePortBraDegradeResumeTrap | current | The trap indicates that BRA Port CRC reached degraded threshold Clear. | |
| 1.3.6.1.4.1.2011.6.113.3.2.3.0.5 | NotificationhwIASVoicePortBraCrcAlarmTrap | current | The trap indicates that the CRC errors on the BRA port reach the alarm threshold. | |
| 1.3.6.1.4.1.2011.6.113.3.2.3.0.6 | NotificationhwIASVoicePortBraCrcAlarmResumeTrap | current | The trap indicates that BRA Port CRC reached alarm threshold Clear. | |
| 1.3.6.1.4.1.2011.6.113.3.2.4 | NodehwIASVoicePortE1AlarmTraps | |||
| 1.3.6.1.4.1.2011.6.113.3.2.4.0 | NodehwIASVoicePortE1StateAlarmTraps | |||
| 1.3.6.1.4.1.2011.6.113.3.2.4.0.1 | NotificationhwIASVoicePortE1FaultTrap | current | The trap indicates that E1 line abnormal. | |
| 1.3.6.1.4.1.2011.6.113.3.2.4.0.2 | NotificationhwIASVoicePortE1ResumeTrap | current | The trap indicates that E1 line recovery. | |
| 1.3.6.1.4.1.2011.6.113.3.2.4.0.3 | NotificationhwIASVoicePortE1DegradeTrap | current | The trap indicates that the number of CRC errors on the E1 port reaches the degraded threshold. | |
| 1.3.6.1.4.1.2011.6.113.3.2.4.0.4 | NotificationhwIASVoicePortE1DegradeResumeTrap | current | The trap indicates that E1 Port CRC reached degraded threshold Clear. | |
| 1.3.6.1.4.1.2011.6.113.3.2.4.0.5 | NotificationhwIASVoicePortE1CrcAlarmTrap | current | The trap indicates that the CRC errors on the E1 port reach the alarm threshold. | |
| 1.3.6.1.4.1.2011.6.113.3.2.4.0.6 | NotificationhwIASVoicePortE1CrcAlarmResumeTrap | current | The trap indicates that E1 Port CRC reached alarm threshold Clear. | |
| 1.3.6.1.4.1.2011.6.113.3.2.4.0.7 | NotificationhwIASVoicePortE1BitFaultTrap | current | The trap indicates that the number of the error bits of the E1 port reaches the threshold. | |
| 1.3.6.1.4.1.2011.6.113.3.2.4.0.8 | NotificationhwIASVoicePortE1BitResumeTrap | current | The trap indicates that E1 port Bit Error reached threshold clear. | |
| 1.3.6.1.4.1.2011.6.113.3.2.4.0.9 | NotificationhwIASVoicePortE1LdtTrap | current | The trap indicates that the number of the transient error bits of the E1 port reaches the alarm threshold. | |
| 1.3.6.1.4.1.2011.6.113.3.2.4.0.10 | NotificationhwIASVoicePortE1FrmslipTrap | current | The trap indicates that the out-of-synchronization frames of the E1 port reach the degraded threshold. | |
| 1.3.6.1.4.1.2011.6.113.3.2.5 | NodehwIASVoicePortIsdnL2AlarmTraps | |||
| 1.3.6.1.4.1.2011.6.113.3.2.5.0 | NodehwIASVoicePortIsdnL2ErrorAlarmTraps | |||
| 1.3.6.1.4.1.2011.6.113.3.2.5.0.1 | NotificationhwIASVoicePortIsdnL2ErrorTrap | current | The trap indicates that the times of the receipt of Q.921 unsolicited response reach the alarm threshold. | |
| 1.3.6.1.4.1.2011.6.113.3.2.6 | NodehwIASVoicePortFxoAlarmTraps | |||
| 1.3.6.1.4.1.2011.6.113.3.2.6.0 | NodehwIASVoicePortFxoPowerAlarmTraps | |||
| 1.3.6.1.4.1.2011.6.113.3.2.6.0.1 | NotificationhwIASVoiceFxoPortPowerAlarmTrap | current | The trap indicates that FXO port power fault. | |
| 1.3.6.1.4.1.2011.6.113.3.2.6.0.2 | NotificationhwIASVoiceFxoPortPowerAlarmRestoreTrap | current | The trap indicates that FXO port power restore. |