HUAWEI-VOICEUSER-MIB
354 objects
This MIB module defines MIB objects which provides voice user management.
Imported Objects
| HUAWEI-DEVICE-MIB | hwConfigChangeIP |
| HUAWEI-MIB | huaweiUtility |
| SNMPv2-CONF | MODULE-COMPLIANCE NOTIFICATION-GROUP OBJECT-GROUP |
| SNMPv2-SMI | Counter32 Integer32 IpAddress MODULE-IDENTITY NOTIFICATION-TYPE OBJECT-TYPE private TimeTicks Unsigned32 |
| SNMPv2-TC | DisplayString RowStatus TEXTUAL-CONVENTION |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.2011.6.112 | IdentityhwIASVoiceUser | This MIB module defines MIB objects which provides voice user management. | ||
| 1.3.6.1.4.1.2011.6.112.1 | NodehwIASVoiceUserObjects | |||
| 1.3.6.1.4.1.2011.6.112.1.1 | TablehwPstnCTPConfigTable | not-accessible | current | This table is used to add, delete, modify, and query the PSTN user. The index of this table is hwPstnCTPConfigIndex. The service attributes of a PSTN port incl… |
| 1.3.6.1.4.1.2011.6.112.1.1.1 | RowhwPstnCTPConfigEntry | not-accessible | current | This table is used to add, delete, modify, and query the PSTN user. The index of this entry is hwPstnCTPConfigIndex. The service attributes of a PSTN port incl… |
| 1.3.6.1.4.1.2011.6.112.1.1.1.1 | ColumnhwPstnCTPConfigIndex | not-accessible | current | Indicates the frame/slot/port. 24 0 0011000 | xxxxxxxx | xxxxxx | xxxxxxx | 0000 port frame slot port 0 type The highest 7 bits indicate the type of port, for … |
| 1.3.6.1.4.1.2011.6.112.1.1.1.2 | ColumnhwPstnCTPMgId | read-create | current | Indicates the MG ID. |
| 1.3.6.1.4.1.2011.6.112.1.1.1.3 | ColumnhwPstnCTPTerminationID | read-create | current | Indicates the terminal ID (only the character string of digit type is supported). |
| 1.3.6.1.4.1.2011.6.112.1.1.1.4 | ColumnhwPstnCTPTelNo | read-create | current | Indicates the telephone number. |
| 1.3.6.1.4.1.2011.6.112.1.1.1.5 | ColumnhwPstnCTPRowStatus | read-write | current | Indicates the row status.The operations include activate, shut down, not start, create and register, create and wait, and delete. The operations are not used i… |
| 1.3.6.1.4.1.2011.6.112.1.1.1.6 | ColumnhwPstnCTPLayerFlag | read-only | current | Indicates whether to layer. Options: 1. noLayer(1) -not to layer 2. layer(2) -to layer 3. null(-1) -invalid value |
| 1.3.6.1.4.1.2011.6.112.1.1.1.7 | ColumnhwPstnCTPPriorityFlag | read-create | current | Indicates the priority of the terminal. Options: 1. cat1(1) -the highest priority 2. cat2(2) -the middle priority 3. cat3(3) -the lowest priority |
| 1.3.6.1.4.1.2011.6.112.1.1.1.8 | ColumnhwPstnCTPPotsLineType | read-create | current | Indicates the subscriber type. Options: 1. del(1) -DEL 2. lcPBX(2) -Loop Calling PBX 3. ecPBX(3) -earth calling PBX 4. payPhone(4) -PayPhone |
| 1.3.6.1.4.1.2011.6.112.1.1.1.9 | ColumnhwPstnCTPDCTime | read-create | current | Indicates the disconnect clear interval. Unit: 10ms |
| 1.3.6.1.4.1.2011.6.112.1.1.1.10 | ColumnhwPstnCTPFSKDelayInterval | read-create | current | Indicates the FSK delay interval. Unit: 10ms |
| 1.3.6.1.4.1.2011.6.112.1.1.1.11 | ColumnhwPstnCTPCidTransWhen | read-create | current | Indicates the time for delivering the caller ID. Options: 1. afterRing(1) -transmit CID after ringing 2. beforeRing(2) -transmit CID before ringing |
| 1.3.6.1.4.1.2011.6.112.1.1.1.12 | ColumnhwPstnCTPCidFormat | read-create | current | Indicates the format of the caller ID. Options: 1. sdmfFsk(1) -SDMF FSK format 2. mdmfFsk(2) -MDMF FSK format 3. dtmf(3) -DTMF format 4. russia(4) -russia form… |
| 1.3.6.1.4.1.2011.6.112.1.1.1.13 | ColumnhwPstnCTPVQEAgc | read-create | current | Indicates enable AGC or not. Options: 1. enable(1) -enable AGC 2. disable(2) -disable AGC |
| 1.3.6.1.4.1.2011.6.112.1.1.1.14 | ColumnhwPstnCTPVQESns | read-create | current | Indicates enable SNS or not. Options: 1. enable(1) -enable SNS 2. disable(2) -disable SNS |
| 1.3.6.1.4.1.2011.6.112.1.1.1.15 | ColumnhwPstnCTPVQEAgcLevel | read-create | current | Indicates set AGC target value. Unit: dbm0 |
| 1.3.6.1.4.1.2011.6.112.1.1.1.16 | ColumnhwPstnCTPVQESnsLevel | read-create | current | Indicates set VQE noise suppression level. Unit: db |
| 1.3.6.1.4.1.2011.6.112.1.1.1.17 | ColumnhwPstnCTPDspInputGain | read-create | current | Dsp input gain. 1: -10db 2: -9db 3: -8db 4: -7db 5: -6db 6: -5db 7: -4db 8: -3db 9: -2db 10: -1db 11: 0db 12: 1db 13: 2db 14: 3db 15: 4db 16: 5db Unit: db |
| 1.3.6.1.4.1.2011.6.112.1.1.1.18 | ColumnhwPstnCTPDspOutputGain | read-create | current | Dsp output gain. 1: -10db 2: -9db 3: -8db 4: -7db 5: -6db 6: -5db 7: -4db 8: -3db 9: -2db 10: -1db 11: 0db 12: 1db 13: 2db 14: 3db 15: 4db 16: 5db 17: 6db 18: … |
| 1.3.6.1.4.1.2011.6.112.1.1.1.19 | ColumnhwPstnCTPDetectANSbarBySingleToneFlag | read-create | current | It indicates whether the ANSbar signal detected by SingleTone is supported. Options: 1. enable(1) -the ANSbar signal detected by SingleTone is supported 2. dis… |
| 1.3.6.1.4.1.2011.6.112.1.1.1.20 | ColumnhwPstnCTPBellANSFlag | read-create | current | It indicates whether the Bell ANS is supported. Options: 1. enable(1) -the Bell ANS is supported 2. disable(2) -the Bell ANS is not supported |
| 1.3.6.1.4.1.2011.6.112.1.1.1.21 | ColumnhwPstnCTPDspParaTemplate | read-create | current | The index of dsp parameter template name. |
| 1.3.6.1.4.1.2011.6.112.1.1.1.22 | ColumnhwPstnCTPCidFskMode | read-create | current | It indicates the mode of fsk. Options: 1. bell202(1) -bell 202 2. ccittv23(2) -ccitt v23 3. ntt(3) -ntt |
| 1.3.6.1.4.1.2011.6.112.1.1.1.23 | ColumnhwPstnCTPCidTasPattern | read-create | current | It indicates the mode of tas. Options: 1. noTas(1) -no tas 2. dtAs(2) -DT as |
| 1.3.6.1.4.1.2011.6.112.1.1.1.24 | ColumnhwPstnCTPUserGroupid | read-write | current | It indicates the user group ID. -1 indicates clear the user group info. |
| 1.3.6.1.4.1.2011.6.112.1.1.1.25 | ColumnhwPstnCTPDigitMapGroupName | read-write | current | It indicates the digitmap group name. |
| 1.3.6.1.4.1.2011.6.112.1.1.1.26 | ColumnhwPstnCTPForceSendFsk | read-create | current | Indicates enable force send FSK or not. Options: 1. enable(1) -enable force send FSK 2. disable(2) -disable force send FSK |
| 1.3.6.1.4.1.2011.6.112.1.1.1.27 | ColumnhwPstnCTPFSKAlertInterval | read-write | current | It indicates fskend to alert Interval. -1 indicate invalid value. Unit: 10ms |
| 1.3.6.1.4.1.2011.6.112.1.1.1.28 | ColumnhwPstnCTPConfigDefaultCli | read-write | current | It indicates the default cli number of outgoing call. |
| 1.3.6.1.4.1.2011.6.112.1.1.1.29 | ColumnhwPstnCTPEOCTime | read-create | current | Indicates the end of call interval. Unit: 10ms |
| 1.3.6.1.4.1.2011.6.112.1.1.1.30 | ColumnhwPstnCTPRemoteBlockPowerDeny | read-write | current | Indicates the flag of remote block power deny. Options: 1. enable(1) - enable remote block power deny 2. disable(2) - disable remote block power deny |
| 1.3.6.1.4.1.2011.6.112.1.2 | TablehwPstnCTPOperTable | not-accessible | current | It is used to maintain PSTN ports with the VSP feature. The index of this table is hwPstnCTPOperIndex. Through the table, you can query the states of PSTN port… |
| 1.3.6.1.4.1.2011.6.112.1.2.1 | RowhwPstnCTPOperEntry | not-accessible | current | It is used to maintain PSTN ports with the VSP feature. The index of this entry is hwPstnCTPOperIndex. Through the table, you can query the states of PSTN port… |
| 1.3.6.1.4.1.2011.6.112.1.2.1.1 | ColumnhwPstnCTPOperIndex | not-accessible | current | Indicates the frame/slot/port. 24 0 0011000 | xxxxxxxx | xxxxxx | xxxxxxx | 0000 port frame slot port 0 type The highest 7 bits indicate the type of port, for … |
| 1.3.6.1.4.1.2011.6.112.1.2.1.2 | ColumnhwPstnCTPSrvState | read-only | current | Indicates the running status of the service layer of the PSTN port. Options: 1. fault(1)-the port is fault 2. idle(2) -the user is idle 3. offHook(3) -the user… |
| 1.3.6.1.4.1.2011.6.112.1.2.1.3 | ColumnhwPstnCTPAdminState | read-only | current | Indicates the administration status of the service layer of the PSTN port. Options: 1. blockedLocally(1) -the service is blocked cause of the local reason 2. b… |
| 1.3.6.1.4.1.2011.6.112.1.2.1.4 | ColumnhwPstnCTPAdminOper | read-write | current | Indicates the maintenance operation of the service layer of the PSTN port. Options: 1. endService(1) -stop service 2. startService(2) -start service 3. deferEn… |
| 1.3.6.1.4.1.2011.6.112.1.2.1.5 | ColumnhwPstnCTPSrvStateChange | read-only | current | Indicates the service running status changing time of the PSTN port. |
| 1.3.6.1.4.1.2011.6.112.1.2.1.6 | ColumnhwPstnCTPAdminStateChange | read-only | current | Indicates the service administration status changing time of the PSTN port. |
| 1.3.6.1.4.1.2011.6.112.1.2.1.7 | ColumnhwPstnCTPMaxCobTime | read-write | current | Length of waiting timer for pstn user defer end service. 0 is not allowed to set. Default: 240 Unit: minute |
| 1.3.6.1.4.1.2011.6.112.1.2.1.8 | ColumnhwPstnCTPOnexpire | read-write | current | Indicates disposal mode when pstn user defer end service timeout. Options: 1. force(1) -force user to end service when end-service timeout 2. cancel(2) -cancel… |
| 1.3.6.1.4.1.2011.6.112.1.2.1.9 | ColumnhwPstnCTPRegState | read-only | current | Indicates the register status of the PSTN port. Options: 1.initializing(1) - the user has not send register request 2.registering(2) - the user has send regist… |
| 1.3.6.1.4.1.2011.6.112.1.2.1.10 | ColumnhwPstnCTPCallState | read-only | current | Indicates the register status of the PSTN port. Options: 1. idle(1)- there is no call on the user 2. offhook(2)- the user hung up 3. dialing(3)- the user is di… |
| 1.3.6.1.4.1.2011.6.112.1.2.1.11 | ColumnhwPstnCTPCallWaitState | read-only | current | Indicates the register status of the PSTN port. Options: 1. disable(1)- the service is disable 2. idle(2)- the is no callwaiting services 3. secondaryRinging(3… |
| 1.3.6.1.4.1.2011.6.112.1.3 | TablehwMgPortStatisticsInfoTable | not-accessible | current | This table is used to query the statistics of the MG service ports. The index of this table is hwMgPortStatInfoIndex. |
| 1.3.6.1.4.1.2011.6.112.1.3.1 | RowhwMgPortStatisticsInfoEntry | not-accessible | current | This table is used to query the statistics of the MG service ports. The index of this entry is hwMgPortStatInfoIndex. |
| 1.3.6.1.4.1.2011.6.112.1.3.1.1 | ColumnhwMgPortStatInfoIndex | not-accessible | current | Indicates the frame ID. The GetNext (walk) operation is to collect the statistics of each specified shelf of the system. In the Get operation, if hwMgPortStatI… |
| 1.3.6.1.4.1.2011.6.112.1.3.1.2 | ColumnhwPstnCTPStatTotalNum | read-only | current | Indicates the total number of the MGPSTN service ports. |
| 1.3.6.1.4.1.2011.6.112.1.3.1.3 | ColumnhwPstnCTPStatFaultNum | read-only | current | Indicates the number of the MGPSTN faulty ports. |
| 1.3.6.1.4.1.2011.6.112.1.3.1.4 | ColumnhwPstnCTPStatIdleNum | read-only | current | Indicates the number of the MGPSTN idle ports. |
| 1.3.6.1.4.1.2011.6.112.1.3.1.5 | ColumnhwPstnCTPStatOffhookNum | read-only | current | Indicates the number of the MGPSTN off-hooked ports. |
| 1.3.6.1.4.1.2011.6.112.1.3.1.6 | ColumnhwPstnCTPStatParkingNum | read-only | current | Indicates the number of the MGPSTN locked ports. |
| 1.3.6.1.4.1.2011.6.112.1.3.1.7 | ColumnhwPstnCTPStatRingNum | read-only | current | Indicates the number of the MGPSTN ringing ports. |
| 1.3.6.1.4.1.2011.6.112.1.3.1.8 | ColumnhwMgPortStatInfoTotalNum | read-only | current | Indicates the total number of the MG service ports. |
| 1.3.6.1.4.1.2011.6.112.1.3.1.9 | ColumnhwMgPortStatInfoUseableNum | read-only | current | Indicates the number of the MG idle ports. |
| 1.3.6.1.4.1.2011.6.112.1.3.1.10 | ColumnhwMgPortStatInfoBusyNum | read-only | current | Indicates the number of the MG busy ports. |
| 1.3.6.1.4.1.2011.6.112.1.3.1.11 | ColumnhwMgPortStatInfoFaultNum | read-only | current | Indicates the number of the MG faulty ports. |
| 1.3.6.1.4.1.2011.6.112.1.3.1.12 | ColumnhwMgPortStatInfoForbiddenNum | read-only | current | Indicates the number of the MG blocked ports. |
| 1.3.6.1.4.1.2011.6.112.1.4 | TablehwBraCTPConfigTable | not-accessible | current | It is used to configure the service attributes of a BRA port. It is used to add, delete, modify, and query the ISDN user with the VoIP feature. The index of th… |
| 1.3.6.1.4.1.2011.6.112.1.4.1 | RowhwBraCTPConfigEntry | not-accessible | current | It is used to configure the service attributes of a BRA port. It is used to add, delete, modify, and query the ISDN user with the VoIP feature. The index of th… |
| 1.3.6.1.4.1.2011.6.112.1.4.1.1 | ColumnhwBraCTPConfigIndex | not-accessible | current | Indicates the frame/slot/port. 25 0 0011001 | xxxxxxxx | xxxxxx | xxxxxxx | 0000 port frame slot port 0 type The highest 7 bits indicate the type of port, for … |
| 1.3.6.1.4.1.2011.6.112.1.4.1.2 | ColumnhwBraCTPMgId | read-create | current | Indicates the MG ID. |
| 1.3.6.1.4.1.2011.6.112.1.4.1.3 | ColumnhwBraCTPTerminationID | read-create | current | Indicates the start terminal ID (only the character string of digit type is supported). |
| 1.3.6.1.4.1.2011.6.112.1.4.1.4 | ColumnhwBraCTPTelNo | read-create | current | Indicates the BRA telephone number. |
| 1.3.6.1.4.1.2011.6.112.1.4.1.5 | ColumnhwBraCTPLinkSetNo | read-create | current | Indicates the link set to which the BRA terminal belongs (the value range depends on the product specifications). |
| 1.3.6.1.4.1.2011.6.112.1.4.1.6 | ColumnhwBraCTPIuaIID | read-create | current | Indicates the interface ID of the BRA terminal. -1 means this parameter is not used. |
| 1.3.6.1.4.1.2011.6.112.1.4.1.7 | ColumnhwBraCTPRowStatus | read-write | current | Indicates the row status. |
| 1.3.6.1.4.1.2011.6.112.1.4.1.8 | ColumnhwBraCTPPriorityFlag | read-create | current | Indicates the priority of the terminal. Options: 1. cat1(1) -the highest priority 2. cat2(2) -the middle priority 3. cat3(3) -the lowest priority Default: cat3… |
| 1.3.6.1.4.1.2011.6.112.1.4.1.9 | ColumnhwBraCTPLayerFlag | read-only | current | Indicates whether to layer. Options: 1. noLayer(1) -not to layer 2. layer(2) -to layer 3. null(-1) -invalid value |
| 1.3.6.1.4.1.2011.6.112.1.4.1.10 | ColumnhwBraCTPUniErrReport | read-write | current | UNI fault report flag of bra user. Options: 1. disable(1) -disable 2. enable(2) -enable Default: disable(1) |
| 1.3.6.1.4.1.2011.6.112.1.4.1.11 | ColumnhwBraCTPAutoResumeLimit | read-write | current | Indicates auto resume times threshold of bra user. Default: 20 |
| 1.3.6.1.4.1.2011.6.112.1.4.1.12 | ColumnhwBraCTPIuaTextIID | read-create | current | Use the text to indicate the interface ID of the BRA terminal. Config area 0~65535. Display area 0~53. |
| 1.3.6.1.4.1.2011.6.112.1.4.1.13 | ColumnhwBraCTPPowerDialerSupport | read-write | current | Powerdialer support flag of bra user. Options: 1. enable(1) -enable 2. disable(2) -disable Default: enable(1) |
| 1.3.6.1.4.1.2011.6.112.1.4.1.14 | ColumnhwBraCTPUserGroupid | read-write | current | It indicates the user group ID. -1 indicates clear the user group info. |
| 1.3.6.1.4.1.2011.6.112.1.4.1.15 | ColumnhwBraCTPDigitMapGroupName | read-write | current | It indicates the digitmap group name. |
| 1.3.6.1.4.1.2011.6.112.1.4.1.16 | ColumnhwBraCTPConfigIncomingcallChangeName | read-write | current | It indicates the number change of incomging call name. |
| 1.3.6.1.4.1.2011.6.112.1.4.1.17 | ColumnhwBraCTPConfigOutgoingcallChangeName | read-write | current | It indicates the number change of outgoing call name. |
| 1.3.6.1.4.1.2011.6.112.1.4.1.18 | ColumnhwBraCTPConfigDefaultCli | read-write | current | It indicates the default cli number of outgoing call. |
| 1.3.6.1.4.1.2011.6.112.1.4.1.19 | ColumnhwBraCTPConfigDefaultCliMode | read-write | current | Indicates the mode of cli number. Options: 1. match(1) - match 2. overwrite(2) -overwrite 3. null(-1) -invalid value Default: match(1) |
| 1.3.6.1.4.1.2011.6.112.1.4.1.20 | ColumnhwBraCTPConfigBearCapability | read-write | current | Indicates the bearCapability of bra user. Options: 1. speech(1) -speech 2. audio(2) -3.1k-audio 3. speechOraudio(3) -speech or 3.1k-audio 4. null(-1) -invalid … |
| 1.3.6.1.4.1.2011.6.112.1.4.1.21 | ColumnhwBraCTPConfigCalledPartyNumType | read-write | current | Indicates the type of called party number. Options: 1. unknown(1) -unknown 2. national(2) -national 3. auto(3) -auto 4. international(4) -international 5. subs… |
| 1.3.6.1.4.1.2011.6.112.1.4.1.22 | ColumnhwBraCTPConfigCalledPartyNumInternationalPrefixFlag | read-write | current | Indicates whether to add prefix on international number. Options: 1. enable(1) -enable 2. disable(2) -disable 3. null(-1) -invalid value Default: disable(2) |
| 1.3.6.1.4.1.2011.6.112.1.4.1.23 | ColumnhwBraCTPConfigCalledPartyNumNationalPrefixFlag | read-write | current | Indicates whether to add prefix on national number. Options: 1. enable(1) -enable 2. disable(2) -disable 3. null(-1) -invalid value Default: disable(2) |
| 1.3.6.1.4.1.2011.6.112.1.4.1.24 | ColumnhwBraCTPDspParaTemplate | read-create | current | Indicates the name of DSP parameter template. |
| 1.3.6.1.4.1.2011.6.112.1.4.1.25 | ColumnhwBraCTPConfigCliGroup | read-write | current | It indicates the cli-group name of outgoing call. |
| 1.3.6.1.4.1.2011.6.112.1.4.1.26 | ColumnhwBraCTPBChnCallRight | read-write | current | Indicates the B channel's incoming and outgoing call permissions. Indicates the permissions of B channels 0-1 from left to right. Meaning of a single byte: 0: … |
| 1.3.6.1.4.1.2011.6.112.1.4.1.27 | ColumnhwBraCTPConfigClearingToneProvision | read-write | current | Indicates whether to provide a tone when a call is released. Options: 1. enable(1) -enable 2. disable(2) -disable 3. null(-1) -invalid value Default: disable(2) |
| 1.3.6.1.4.1.2011.6.112.1.5 | TablehwBraCTPOperTable | not-accessible | current | It is used to perform operations on service attributes of a BRA port. Through this table, you can perform maintenance operations on an ISDN user with the VSP f… |
| 1.3.6.1.4.1.2011.6.112.1.5.1 | RowhwBraCTPOperEntry | not-accessible | current | It is used to perform operations on service attributes of a BRA port. Through this table, you can perform maintenance operations on an ISDN user with the VSP f… |
| 1.3.6.1.4.1.2011.6.112.1.5.1.1 | ColumnhwBraCTPOperIndex | not-accessible | current | Indicates the frame/slot/port. 25 0 0011001 | xxxxxxxx | xxxxxx | xxxxxxx | 0000 port frame slot port 0 type The highest 7 bits indicate the type of port, for … |
| 1.3.6.1.4.1.2011.6.112.1.5.1.2 | ColumnhwBraCTPB1SrvState | read-only | current | Indicates the running status of the service layer of the BRA B1 channel. Options: 1. idle(1) -the user is idle 2. busy(2) -the user is busy 3. fault(3) -the po… |
| 1.3.6.1.4.1.2011.6.112.1.5.1.3 | ColumnhwBraCTPB2SrvState | read-only | current | Indicates the running status of the service layer of the BRA B2 channel. Options: 1. idle(1) -the user is idle 2. busy(2) -the user is busy 3. fault(3) -the po… |
| 1.3.6.1.4.1.2011.6.112.1.5.1.4 | ColumnhwBraCTPB1AdminState | read-only | current | Indicates the administration status of the service layer of the BRA B1 channel. Options: 1. blockedLocally(1) -the service is blocked cause of local reason 2. … |
| 1.3.6.1.4.1.2011.6.112.1.5.1.5 | ColumnhwBraCTPB2AdminState | read-only | current | Indicates the administration status of the service layer of the BRA B2 channel. Options: 1. blockedLocally(1) -the service is blocked cause of local reason 2. … |
| 1.3.6.1.4.1.2011.6.112.1.5.1.6 | ColumnhwBraCTPAdminOper | read-write | current | Indicates the maintenance operation of the service layer of the BRA port. Options: 1. endService(1) -stop service 2. startService(2) -start service 3. deferEnd… |
| 1.3.6.1.4.1.2011.6.112.1.5.1.7 | ColumnhwBraCTPDState | read-only | current | Indicates the status of the BRA D channel. Options: 1. established(1) -established 2. block(2) -blocked 3. notConstruct(3) -unestablished 4. teiAlloced(4) -TEI… |
| 1.3.6.1.4.1.2011.6.112.1.5.1.8 | ColumnhwBraCTPB1SrvStateChange | read-only | current | Indicates the service running status changing time of the BRA B1 channel. |
| 1.3.6.1.4.1.2011.6.112.1.5.1.9 | ColumnhwBraCTPB2SrvStateChange | read-only | current | Indicates the service running status changing time of the BRA B2 channel. |
| 1.3.6.1.4.1.2011.6.112.1.5.1.10 | ColumnhwBraCTPB1AdminStateChange | read-only | current | Indicates the service administration status changing time of the BRA B1 channel. |
| 1.3.6.1.4.1.2011.6.112.1.5.1.11 | ColumnhwBraCTPB2AdminStateChange | read-only | current | Indicates the service administration status changing time of the BRA B2 channel. |
| 1.3.6.1.4.1.2011.6.112.1.5.1.12 | ColumnhwBraCTPDStateChange | read-only | current | Indicates the status changing time of the BRA D channel. |
| 1.3.6.1.4.1.2011.6.112.1.5.1.13 | ColumnhwBraCTPMaxCobTime | read-write | current | Indicates the length of waiting timer for bra user defer end service. 0 is not allowed to set. Default:240 Unit: minute |
| 1.3.6.1.4.1.2011.6.112.1.5.1.14 | ColumnhwBraCTPOnexpire | read-write | current | Indicates the disposal mode when bra user defer end service timeout. Options: 1. force(1) -force user to end service 2. cancel(2) -cancel user's end service De… |
| 1.3.6.1.4.1.2011.6.112.1.5.1.15 | ColumnhwBraCTPAutoResumeTimes | read-only | current | Indicates the auto resume times of bra user. |
| 1.3.6.1.4.1.2011.6.112.1.6 | TablehwBraCTPStatisticsTable | not-accessible | current | This table is used to query the statistics of the MG-BRA service ports. The index of this table is hwBraCTPStatIndex. |
| 1.3.6.1.4.1.2011.6.112.1.6.1 | RowhwBraCTPStatisticsEntry | not-accessible | current | This table is used to query the statistics of the MG-BRA service ports. The index of this entry is hwBraCTPStatIndex. |
| 1.3.6.1.4.1.2011.6.112.1.6.1.1 | ColumnhwBraCTPStatIndex | not-accessible | current | Indicates the frame ID. The GetNext (walk) operation is to collect the statistics of each specified shelf of the system. In the Get operation, if hwMgPortStatI… |
| 1.3.6.1.4.1.2011.6.112.1.6.1.2 | ColumnhwBraCTPStatTotalNum | read-only | current | Indicates the total number of the MGBRA service ports. |
| 1.3.6.1.4.1.2011.6.112.1.6.1.3 | ColumnhwBraCTPStatFaultNum | read-only | current | Indicates the number of faulty ports. |
| 1.3.6.1.4.1.2011.6.112.1.6.1.4 | ColumnhwBraCTPStatIdleNum | read-only | current | Indicates the number of idle ports. |
| 1.3.6.1.4.1.2011.6.112.1.6.1.5 | ColumnhwBraCTPStatBusyNum | read-only | current | Indicates the number of busy ports. |
| 1.3.6.1.4.1.2011.6.112.1.7 | TablehwPraCTPConfigTable | not-accessible | current | It is used to configure the service attributes of a PRA port. It is used to add, delete, modify, and query the PRA user with the VSP feature. The index of this… |
| 1.3.6.1.4.1.2011.6.112.1.7.1 | RowhwPraCTPConfigEntry | not-accessible | current | It is used to configure the service attributes of a PRA port. It is used to add, delete, modify, and query the PRA user with the VSP feature. The index of this… |
| 1.3.6.1.4.1.2011.6.112.1.7.1.1 | ColumnhwPraCTPConfigIndex | not-accessible | current | Indicates the frame/slot/port. 22 0 0010110 | xxxxxxxx | xxxxxx | xxxxxxx | 0000 port frame slot port 0 type The highest 7 bits indicate the type of port, for … |
| 1.3.6.1.4.1.2011.6.112.1.7.1.2 | ColumnhwPraCTPMgId | read-create | current | Indicates the MG ID. |
| 1.3.6.1.4.1.2011.6.112.1.7.1.3 | ColumnhwPraCTPTerminationID | read-create | current | Indicates the start terminal ID (only the character string of digit type is supported). |
| 1.3.6.1.4.1.2011.6.112.1.7.1.4 | ColumnhwPraCTPLinkSetNo | read-create | current | Indicates the link set to which the PRA terminal belongs (the value range depends on the product specifications). |
| 1.3.6.1.4.1.2011.6.112.1.7.1.5 | ColumnhwPraCTPIuaIID | read-create | current | Indicates the interface ID of the PRA terminal. -1 means this parameter is not used. |
| 1.3.6.1.4.1.2011.6.112.1.7.1.6 | ColumnhwPraCTPRowStatus | read-write | current | Indicates the row status. |
| 1.3.6.1.4.1.2011.6.112.1.7.1.7 | ColumnhwPraCTPLayerFlag | read-only | current | Indicates whether to layer. Options: 1. noLayer(1) -not to layer 2. layer(2) -to layer 3. null(-1) -invalid value |
| 1.3.6.1.4.1.2011.6.112.1.7.1.8 | ColumnhwPraCTPPriorityFlag | read-write | current | Indicates terminal priority. Options: 1. cat1(1) -the highest priority 2. cat2(2) -the middle priority 3. cat3(3) -the lowest priority Default: cat3(3) |
| 1.3.6.1.4.1.2011.6.112.1.7.1.9 | ColumnhwPraCTPUniErrReport | read-write | current | Indicates UNI fault report flag of e1 port. Options: 1. disable(1) -disable UNI fault report of e1 port 2. enable(2) -enable UNI fault report of e1 port Defaul… |
| 1.3.6.1.4.1.2011.6.112.1.7.1.10 | ColumnhwPraCTPSubChnMask | read-write | current | Indicates from left to right, each bit indicates enable one sub channel(0-31) or not, 0 means disable, 1 means enable, sub channel 0 and 16 must enable. Defaul… |
| 1.3.6.1.4.1.2011.6.112.1.7.1.11 | ColumnhwPraCTPTelNo | read-create | current | Indicates telphone number. |
| 1.3.6.1.4.1.2011.6.112.1.7.1.12 | ColumnhwPraCTPAutoResumeLimit | read-write | current | Indicates auto resume times threshold of pra user. Default: 20 |
| 1.3.6.1.4.1.2011.6.112.1.7.1.13 | ColumnhwPraCTPIuaTextIID | read-create | current | Use the text to indicate the interface ID of the PRA terminal. |
| 1.3.6.1.4.1.2011.6.112.1.7.1.14 | ColumnhwPraCTPPowerDialerSupport | read-write | current | Powerdialer support flag of pra user. Options: 1. enable(1) -support power dialer 2. disable(2) -not support power dialer Default: enable(1) |
| 1.3.6.1.4.1.2011.6.112.1.7.1.15 | ColumnhwPraCTPUserGroupid | read-write | current | It indicates the user group ID. -1 indicates clear the user group info. |
| 1.3.6.1.4.1.2011.6.112.1.7.1.16 | ColumnhwPraCTPDigitMapGroupName | read-write | current | It indicates the digitmap group name. |
| 1.3.6.1.4.1.2011.6.112.1.7.1.17 | ColumnhwPraCTPConfigIncomingcallChangeName | read-write | current | It indicates the number change name of incoming call. |
| 1.3.6.1.4.1.2011.6.112.1.7.1.18 | ColumnhwPraCTPConfigOutgoingcallChangeName | read-write | current | It indicates the number change name of outgoing call. |
| 1.3.6.1.4.1.2011.6.112.1.7.1.19 | ColumnhwPraCTPConfigDefaultCli | read-write | current | It indicates the default cli number of outgoing call. |
| 1.3.6.1.4.1.2011.6.112.1.7.1.20 | ColumnhwPraCTPConfigDefaultCliMode | read-write | current | Indicates the mode of cli number. Options: 1. match(1) -match 2. overwrite(2) -overwrite 3. null(0) -invalid value Default: match(1) |
| 1.3.6.1.4.1.2011.6.112.1.7.1.21 | ColumnhwPraCTPConfigBearCapability | read-write | current | Indicates the bearCapability of pra user. Options: 1. speech(1) -speech 2. audio(2) -3.1k-audio 3. speechOraudio(3) -speech or 3.1k-audio 4. null(0) -invalid v… |
| 1.3.6.1.4.1.2011.6.112.1.7.1.22 | ColumnhwPraCTPConfigCalledPartyNumType | read-write | current | Indicates the type of called party number. Options: 1. unknown(1) -unknown 2. national(2) -national 3. auto(3) -auto 4. international(4) -international 5. subs… |
| 1.3.6.1.4.1.2011.6.112.1.7.1.23 | ColumnhwPraCTPConfigCalledPartyNumInternationalPrefixFlag | read-write | current | Indicates whether to add prefix on international number. Options: 1. enable(1) -enable 2. disable(2) -disable 3. null(0) -invalid value Default: disable(2) |
| 1.3.6.1.4.1.2011.6.112.1.7.1.24 | ColumnhwPraCTPConfigCalledPartyNumNationalPrefixFlag | read-write | current | Indicates whether to add prefix on national number. Options: 1. enable(1) -enable 2. disable(2) -disable 3. null(0) -invalid value Default: disable(2) |
| 1.3.6.1.4.1.2011.6.112.1.7.1.25 | ColumnhwPraCTPConfigCliGroup | read-write | current | It indicates the cli-group name of outgoing call. |
| 1.3.6.1.4.1.2011.6.112.1.7.1.26 | ColumnhwPraCTPBChnCallRight | read-write | current | Indicates the B channel's incoming and outgoing call permissions. Indicates the permissions of B channels 0-31 from left to right. Meaning of a single byte: 0:… |
| 1.3.6.1.4.1.2011.6.112.1.7.1.27 | ColumnhwPraCTPConfigClearingToneProvision | read-write | current | Indicates whether to provide a tone when a call is released. Options: 1. enable(1) -enable 2. disable(2) -disable 3. null(-1) -invalid value Default: disable(2) |
| 1.3.6.1.4.1.2011.6.112.1.8 | TablehwPraCTPOperTable | not-accessible | current | It is used to perform operations on service attributes of a PRA port. Through this table, you can perform maintenance operations on a PRA user with the VSP fea… |
| 1.3.6.1.4.1.2011.6.112.1.8.1 | RowhwPraCTPOperEntry | not-accessible | current | It is used to perform operations on service attributes of a PRA port. Through this table, you can perform maintenance operations on a PRA user with the VSP fea… |
| 1.3.6.1.4.1.2011.6.112.1.8.1.1 | ColumnhwPraCTPOperIndex | not-accessible | current | Indicates the frame/slot/port. 22 0 0010110 | xxxxxxxx | xxxxxx | xxxxxxx | 0000 port frame slot port 0 type The highest 7 bits indicate the type of port, for … |
| 1.3.6.1.4.1.2011.6.112.1.8.1.2 | ColumnhwPraCTPBchnSrvState | read-only | current | Indicates the running status of the service layer of the 32 B channels of the PRA. Each character corresponds to a timeslot. The value of the character is as f… |
| 1.3.6.1.4.1.2011.6.112.1.8.1.3 | ColumnhwPraCTPBchnAdminState | read-only | current | Indicates the administration status of the service layer of the 32 B channels of the PRA. Each character corresponds to a timeslot. The value of the character … |
| 1.3.6.1.4.1.2011.6.112.1.8.1.4 | ColumnhwPraCTPAdminOper | read-write | current | Indicates the service operation. Options: 1. endService(1) -stop service 2. startService(2) -start service 3. deferEndingService(3) -stop service gracefully |
| 1.3.6.1.4.1.2011.6.112.1.8.1.5 | ColumnhwPraCTPDState | read-only | current | Indicates the status of the PRA D channel. Options: 1. established(1) -established 2. block(2) -blocked 3. notConstruct(3) -unestablished |
| 1.3.6.1.4.1.2011.6.112.1.8.1.6 | ColumnhwPraCTPMaxCobTime | read-write | current | Indicates length of waiting timer for pra user defer end service. 0 is not allowed to set. Default: 240 Unit: minute |
| 1.3.6.1.4.1.2011.6.112.1.8.1.7 | ColumnhwPraCTPOnexpire | read-write | current | Indicates disposal mode when pra user defer end service timeout. Options: 1. force(1) -force end service 2. cancel(2) -cancel end service Default: force(1) |
| 1.3.6.1.4.1.2011.6.112.1.8.1.8 | ColumnhwPraCTPAutoResumeTimes | read-only | current | Indicates auto resume times of pra user. |
| 1.3.6.1.4.1.2011.6.112.1.9 | TablehwPortStateTraceOperTable | not-accessible | current | It is used to trace port status. The index of this table is hwPortStateTraceFrameId. This table traces states of the MG PSTN ports and MG BRA ports in real tim… |
| 1.3.6.1.4.1.2011.6.112.1.9.1 | RowhwPortStateTraceOperEntry | not-accessible | current | It is used to trace port status. The index of this entry is hwPortStateTraceFrameId. This table traces states of the MG PSTN ports and MG BRA ports in real tim… |
| 1.3.6.1.4.1.2011.6.112.1.9.1.1 | ColumnhwPortStateTraceOperFrameId | not-accessible | current | Indicates the frame ID. |
| 1.3.6.1.4.1.2011.6.112.1.9.1.2 | ColumnhwPortStateTraceOperType | read-write | current | Indicates the operation type. Options: 1. stop(1) -stop tracing 2. start(2) -start tracing 3. handshake(3) -handshake |
| 1.3.6.1.4.1.2011.6.112.1.9.1.3 | ColumnhwPortStateTraceOperReportType | read-write | current | Indicates the report type (adopting the bit table): Bit0: indicates to report the running status change of the physical layer. Bit1: indicates to report the ad… |
| 1.3.6.1.4.1.2011.6.112.1.10 | NodehwUserDataTrapSequence | |||
| 1.3.6.1.4.1.2011.6.112.1.10.1 | ScalarhwPstnUserDataTrapSequence | read-only | current | Indicates that the Trap sequence is reported after the PSTN subscriber data changes. |
| 1.3.6.1.4.1.2011.6.112.1.10.2 | ScalarhwBraUserDataChangeSequence | read-only | current | Indicates that the Trap sequence is reported after the BRA subscriber data changes. |
| 1.3.6.1.4.1.2011.6.112.1.10.3 | ScalarhwPraUserDataChangeSequence | read-only | current | Indicates that the Trap sequence is reported after the PRA subscriber data changes. |
| 1.3.6.1.4.1.2011.6.112.1.10.4 | ScalarhwR2UserDataChangeSequence | read-only | current | Indicates that the Trap sequence is reported after the R2 subscriber data changes. |
| 1.3.6.1.4.1.2011.6.112.1.11 | TablehwPmbsCTPConfigTable | not-accessible | current | This table is used to config PMBS user. The index of this table is hwPmbsCTPConfigIndex. |
| 1.3.6.1.4.1.2011.6.112.1.11.1 | RowhwPmbsCTPConfigEntry | not-accessible | current | This table is used to config PMBS user. The index of this entry is hwPmbsCTPConfigIndex. |
| 1.3.6.1.4.1.2011.6.112.1.11.1.1 | ColumnhwPmbsCTPConfigIndex | not-accessible | current | Indicates the frame/slot/port. The PMBS user must be configurated on BRA port. 25 0 0011001 | xxxxxxxx | xxxxxx | xxxxxxx | 0000 port frame slot port 0 type Th… |
| 1.3.6.1.4.1.2011.6.112.1.11.1.2 | ColumnhwPmbsCTPLinkSetNo | read-create | current | IUA LinkSetNo. |
| 1.3.6.1.4.1.2011.6.112.1.11.1.3 | ColumnhwPmbsCTPluaIID | read-write | current | IUA Interface ID. |
| 1.3.6.1.4.1.2011.6.112.1.11.1.4 | ColumnhwPmbsCTPRowStatus | read-write | current | Row status. |
| 1.3.6.1.4.1.2011.6.112.1.11.1.5 | ColumnhwPmbsCTPIuaTextIID | read-create | current | Use the text to indicate the interface ID of the PMBS terminal. |
| 1.3.6.1.4.1.2011.6.112.1.12 | TablehwPmbsCTPOperTable | not-accessible | current | This table is used to operate the PMBS user. The index of this table is hwPmbsCTPOperIndex. |
| 1.3.6.1.4.1.2011.6.112.1.12.1 | RowhwPmbsCTPOperEntry | not-accessible | current | This table is used to operate the PMBS user. The index of this entry is hwPmbsCTPOperIndex. |
| 1.3.6.1.4.1.2011.6.112.1.12.1.1 | ColumnhwPmbsCTPOperIndex | not-accessible | current | Indicates the frame/slot/port. 25 0 0011001 | xxxxxxxx | xxxxxx | xxxxxxx | 0000 port frame slot port 0 type The highest 7 bits indicate the type of port, for … |
| 1.3.6.1.4.1.2011.6.112.1.12.1.2 | ColumnhwPmbsCTPPLinkState | read-only | current | Indicates from left to right, each bit indicates plink status of one TEI(0-62) or not, 0 means plink not established, 1 means plink established. |
| 1.3.6.1.4.1.2011.6.112.1.13 | TablehwPstnCTPRightConfigTable | not-accessible | current | This table is used to config PSTN user's right and servicedata. The indexes of this table are hwPstnCTPRightConfigIndex, hwPstnCTPRightPortBindIndex. |
| 1.3.6.1.4.1.2011.6.112.1.13.1 | RowhwPstnCTPRightConfigEntry | not-accessible | current | This table is used to config PSTN user's right and servicedata. The indexes of this entry are hwPstnCTPRightConfigIndex, hwPstnCTPRightPortBindIndex. |
| 1.3.6.1.4.1.2011.6.112.1.13.1.1 | ColumnhwPstnCTPRightConfigIndex | not-accessible | current | Indicates the frame/slot/port. 31 0 0011000 | xxxxxxxx | xxxxxx | xxxxxxx | 0000 port frame slot port 0 type The highest 7 bits indicate the type of port, for … |
| 1.3.6.1.4.1.2011.6.112.1.13.1.2 | ColumnhwPstnCTPRightPortBindIndex | not-accessible | current | Indicates the telephone number index. |
| 1.3.6.1.4.1.2011.6.112.1.13.1.3 | ColumnhwPstnCTPRightCallHold | read-write | current | Indicates the right flag of callhold. Options: 1. disable(1) -disable 2. enable(2) -enable |
| 1.3.6.1.4.1.2011.6.112.1.13.1.4 | ColumnhwPstnCTPRightThreeParty | read-write | current | Indicates the right flag of three-party. Options: 1. disable(1) -disable 2. enable(2) -enable |
| 1.3.6.1.4.1.2011.6.112.1.13.1.5 | ColumnhwPstnCTPRightConf | read-write | current | Indicates the right flag of conf. Options: 1. disable(1) -disable 2. enable(2) -enable |
| 1.3.6.1.4.1.2011.6.112.1.13.1.6 | ColumnhwPstnCTPRightCt | read-write | current | Indicates the right flag of ct. Options: 1. disable(1) -disable 2. enable(2) -enable |
| 1.3.6.1.4.1.2011.6.112.1.13.1.7 | ColumnhwPstnCTPRightCw | read-write | current | Indicates the right flag of cw. Options: 1. disable(1) -disable 2. enable(2) -enable |
| 1.3.6.1.4.1.2011.6.112.1.13.1.8 | ColumnhwPstnCTPRightMcid | read-write | current | Indicates the right flag of mcid. Options: 1. disable(1) -disable 2. enable(2) -enable |
| 1.3.6.1.4.1.2011.6.112.1.13.1.9 | ColumnhwPstnCTPRightMwi | read-write | current | Indicates the right flag of mwi. Options: 1. disable(1) -disable 2. enable(2) -enable |
| 1.3.6.1.4.1.2011.6.112.1.13.1.10 | ColumnhwPstnCTPRightTp | read-write | obsolete | Indicates the right flag of tp. Options: 1. disable(1) -disable 2. enable(2) -enable |
| 1.3.6.1.4.1.2011.6.112.1.13.1.11 | ColumnhwPstnCTPRightCd | read-write | obsolete | Indicates the right flag of cd. Options: 1. disable(1) -disable 2. enable(2) -enable |
| 1.3.6.1.4.1.2011.6.112.1.13.1.12 | ColumnhwPstnCTPRightUus1 | read-write | obsolete | Indicates the right flag of uus1. Options: 1. disable(1) -disable 2. enable(2) -enable |
| 1.3.6.1.4.1.2011.6.112.1.13.1.13 | ColumnhwPstnCTPRightUus2 | read-write | obsolete | Indicates the right flag of uus2. Options: 1. disable(1) -disable 2. enable(2) -enable |
| 1.3.6.1.4.1.2011.6.112.1.13.1.14 | ColumnhwPstnCTPRightUus3 | read-write | obsolete | Indicates the right flag of uus3. Options: 1. disable(1) -disable 2. enable(2) -enable |
| 1.3.6.1.4.1.2011.6.112.1.13.1.15 | ColumnhwPstnCTPRightCentrexNo | read-write | current | It is used to set centrex NO. of SipPstnUser, 4294967295 means to clear the configuration. |
| 1.3.6.1.4.1.2011.6.112.1.13.1.16 | ColumnhwPstnCTPRightCentrexPrefix | read-write | current | Indicates the CentrexPrefix of SipPstnUser. |
| 1.3.6.1.4.1.2011.6.112.1.13.1.17 | ColumnhwPstnCTPRightCentrexFlag | read-write | current | Indicates the CentrexFlag of SipPstnUser. Options: 1. dialDirectly(1) -dial directly 2. dialSecondary(2) -dial secondary |
| 1.3.6.1.4.1.2011.6.112.1.13.1.18 | ColumnhwPstnCTPRightMwiMode | read-write | current | Indicates the MwiMode of SipPstnUser. Options: 1. deferred(1) -deferred 2. immediate(2) -immediate 3. combine(3) -combine |
| 1.3.6.1.4.1.2011.6.112.1.13.1.19 | ColumnhwPstnCTPRightHotTime | read-write | current | Indicates the HotTime of SipPstnUser. Unit: second |
| 1.3.6.1.4.1.2011.6.112.1.13.1.20 | ColumnhwPstnCTPRightHotLineNum | read-write | current | Indicates the HotLineNum of SipPstnUser, the length of hotlinenum mustn't exceed 64. |
| 1.3.6.1.4.1.2011.6.112.1.13.1.21 | ColumnhwPstnCTPRightDialTone | read-write | current | Indicates the DialTone of SipPstnUser. Options: 1. normal(1) -normal tone 2. special(2) -special tone 3. mw(3) -message waiting tone 4. stutter(4) -stutter tone |
| 1.3.6.1.4.1.2011.6.112.1.13.1.22 | ColumnhwPstnCTPRightCfbNum | read-write | current | Indicates the CfbNum of SipPstnUser. |
| 1.3.6.1.4.1.2011.6.112.1.13.1.23 | ColumnhwPstnCTPRightCfnrNum | read-write | current | Indicates the CfnrNum of SipPstnUser. |
| 1.3.6.1.4.1.2011.6.112.1.13.1.24 | ColumnhwPstnCTPRightCfuNum | read-write | current | Indicates the CfuNum of SipPstnUser. |
| 1.3.6.1.4.1.2011.6.112.1.13.1.25 | ColumnhwPstnCTPRightCfnrTime | read-write | current | Indicates the CfnrTime of SipPstnUser. Unit: second |
| 1.3.6.1.4.1.2011.6.112.1.13.1.26 | ColumnhwPstnCTPRightAnonymousCall | read-write | current | Indicates the right flag of anonymous-call. Options: 1. disable(1) -disable anonymous-call 2. enable(2) -enable anonymous-call |
| 1.3.6.1.4.1.2011.6.112.1.13.1.27 | ColumnhwPstnCTPRightAuthName | read-write | current | Indicates the authorization username of sippstnuser. The character set is unrestricted. |
| 1.3.6.1.4.1.2011.6.112.1.13.1.28 | ColumnhwPstnCTPRightAuthPassword | read-write | current | Indicates the authorization password of sippstnuser. The character set is unrestricted. |
| 1.3.6.1.4.1.2011.6.112.1.13.1.29 | ColumnhwPstnCTPRightEndConfigIndex | read-write | current | Indicates the end shelf/slot/port. |
| 1.3.6.1.4.1.2011.6.112.1.13.1.30 | ColumnhwPstnCTPRightAuthPasswordMode | read-write | current | Indicates the authorization mode of the password for sippstnuser. Options: 1. password(1) -authorized by password 2. ha1(2) |
| 1.3.6.1.4.1.2011.6.112.1.13.1.31 | ColumnhwPstnCTPRightAuthHA1 | read-write | current | Indicates the authorization HA1 value of sippstnuser. The character set is unrestricted. |
| 1.3.6.1.4.1.2011.6.112.1.13.1.32 | ColumnhwPstnCTPRightAutoReversePolarity | read-write | current | Indicates the right flag of auto reverse polarity. Options: 1. disable(1) -disable 2. enable(2) -enable |
| 1.3.6.1.4.1.2011.6.112.1.13.1.33 | ColumnhwPstnCTPRightDisplayNameMode | read-write | current | Indicates the right flag of display name mode. Options: 1. disable(1) -disable 2. enable(2) -enable |
| 1.3.6.1.4.1.2011.6.112.1.13.1.34 | ColumnhwPstnCTPRightDisplayName | read-write | current | Indicates the display name string. |
| 1.3.6.1.4.1.2011.6.112.1.13.1.35 | ColumnhwPstnCTPRightHotLine | read-write | current | Indicates the right flag of hotline. Options: 1. disable(1) -disable 2. enable(2) -enable |
| 1.3.6.1.4.1.2011.6.112.1.13.1.36 | ColumnhwPstnCTPRightPermanentHold | read-write | current | Indicates the right flag of permanent-hold. Options: 1. disable(1) -disable 2. enable(2) -enable |
| 1.3.6.1.4.1.2011.6.112.1.13.1.37 | ColumnhwPstnCTPRightCutoffDisconnect | read-write | current | Indicates the right flag of cutoff-disconnect. Options: 1. disable(1) -disable 2. enable(2) -enable |
| 1.3.6.1.4.1.2011.6.112.1.13.1.38 | ColumnhwPstnCTPRightSccClass | read-write | current | Indicates the right flag of SCC class service, for example call-park, call-pickup, EBO. Options: 1. disable(1) -disable 2. enable(2) -enable |
| 1.3.6.1.4.1.2011.6.112.1.13.1.39 | ColumnhwPstnCTPRightPermanentHoldMode | read-write | current | Indicates the PermanentHoldMode of SipPstnUser. Options: 1. norecall(1) - no recall 2. reminder(2) -reminder 3. recall(3) -recall |
| 1.3.6.1.4.1.2011.6.112.1.13.1.40 | ColumnhwPstnCTPRightPermanentHoldTime | read-write | current | Indicates the PermanentHoldTime of SipPstnUser. Unit: second |
| 1.3.6.1.4.1.2011.6.112.1.13.1.41 | ColumnhwPstnCTPRightFastDisconnect | read-write | current | Indicates the right flag of fast-disconnect. Options: 1. disable(1) -disable 2. enable(2) -enable |
| 1.3.6.1.4.1.2011.6.112.1.13.1.42 | ColumnhwPstnCTPRightDc | read-write | current | Indicates the right flag of dual communication. Options: 1. disable(1) -disable 2. enable(2) -enable |
| 1.3.6.1.4.1.2011.6.112.1.14 | TablehwCTPExternNumberConfigTable | not-accessible | current | This table is used to config extern number of the PSTN or ISDN user. The indexes of this table are hwCTPExternNumberConfigIndex, hwCTPExternNumberPortBindIndex. |
| 1.3.6.1.4.1.2011.6.112.1.14.1 | RowhwCTPExternNumberConfigEntry | not-accessible | current | This table is used to config extern number of the PSTN or ISDN user. The indexes of this entry are hwCTPExternNumberConfigIndex, hwCTPExternNumberPortBindIndex. |
| 1.3.6.1.4.1.2011.6.112.1.14.1.1 | ColumnhwCTPExternNumberConfigIndex | not-accessible | current | Indicates the frame/slot/port. 31 0 xxxxxxx | xxxxxxxx | xxxxxx | xxxxxxx | 0000 port frame slot port 0 type The highest 7 bits indicate the type of port the n… |
| 1.3.6.1.4.1.2011.6.112.1.14.1.2 | ColumnhwCTPExternNumberPortBindIndex | not-accessible | current | Indicates the extend number index. If the value equal -1, then return the idle index of this shelf/slot/port. |
| 1.3.6.1.4.1.2011.6.112.1.14.1.3 | ColumnhwCTPExternNumber | read-write | current | Indicates the extend number. - means to delete this extern number. |
| 1.3.6.1.4.1.2011.6.112.1.14.1.4 | ColumnhwCTPExternRowStatus | read-write | current | RowStatus |
| 1.3.6.1.4.1.2011.6.112.1.14.1.5 | ColumnhwCTPExternUserGroupid | read-write | current | It indicates the user group ID. -1 indicates clear the user group info. |
| 1.3.6.1.4.1.2011.6.112.1.14.1.6 | ColumnhwCTPExternUserRegState | read-only | current | It indicates the register state of the extend number. |
| 1.3.6.1.4.1.2011.6.112.1.15 | TablehwBraCTPRightConfigTable | not-accessible | current | This table is used to config BRA user's right and servicedata. The indexes of this table are hwBraCTPRightConfigIndex, hwBraCTPRightPortBindIndex. |
| 1.3.6.1.4.1.2011.6.112.1.15.1 | RowhwBraCTPRightConfigEntry | not-accessible | current | This table is used to config BRA user's right and servicedata. The indexes of this entry are hwBraCTPRightConfigIndex, hwBraCTPRightPortBindIndex. |
| 1.3.6.1.4.1.2011.6.112.1.15.1.1 | ColumnhwBraCTPRightConfigIndex | not-accessible | current | Indicates the frame/slot/port. 31 0 0011001 | xxxxxxxx | xxxxxx | xxxxxxx | 0000 port frame slot port 0 type The highest 7 bits indicate the type of port, for … |
| 1.3.6.1.4.1.2011.6.112.1.15.1.2 | ColumnhwBraCTPRightPortBindIndex | not-accessible | current | Indicates the telephone number index. |
| 1.3.6.1.4.1.2011.6.112.1.15.1.3 | ColumnhwBraCTPRightAuthName | read-write | current | Indicates the authorization username of sipbrauser. The character set is unrestricted. |
| 1.3.6.1.4.1.2011.6.112.1.15.1.4 | ColumnhwBraCTPRightAuthPassword | read-write | current | Indicates the authorization password of sipbrauser. The character set is unrestricted. |
| 1.3.6.1.4.1.2011.6.112.1.15.1.5 | ColumnhwBraCTPRightEndConfigIndex | read-write | current | Indicates the end shelf/slot/port. |
| 1.3.6.1.4.1.2011.6.112.1.15.1.6 | ColumnhwBraCTPRightAuthPasswordMode | read-write | current | Indicates the authorization mode of the password for sipbrauser. Options: 1. password(1) -authorized by password 2. ha1(2) -authorized by ha1 |
| 1.3.6.1.4.1.2011.6.112.1.15.1.7 | ColumnhwBraCTPRightAuthHA1 | read-write | current | Indicates the authorization HA1 value of sipbrauser. The character set is unrestricted. |
| 1.3.6.1.4.1.2011.6.112.1.15.1.8 | ColumnhwBraCTPRightCentrexNo | read-write | current | It is used to set centrex NO. of SipBraUser, 4294967295 means to clear the configuration. |
| 1.3.6.1.4.1.2011.6.112.1.15.1.9 | ColumnhwBraCTPRightCentrexPrefix | read-write | current | Indicates the CentrexPrefix of SipBraUser. |
| 1.3.6.1.4.1.2011.6.112.1.15.1.10 | ColumnhwBraCTPRightCentrexFlag | read-write | current | Indicates the CentrexFlag of SipBraUser. Options: 1. dialDirectly(1) -dial directly 2. dialSecondary(2) -dial secondary |
| 1.3.6.1.4.1.2011.6.112.1.15.1.11 | ColumnhwBraCTPRightMwiMode | read-write | current | Indicates the MwiMode of SipBraUser. Options: 1. deferred(1) -deferred 2. immediate(2) -immediate 3. combine(3) -combine |
| 1.3.6.1.4.1.2011.6.112.1.15.1.12 | ColumnhwBraCTPRightCallHold | read-write | current | Indicates the right flag of callhold. Options: 1. disable(1) -disable 2. enable(2) -enable |
| 1.3.6.1.4.1.2011.6.112.1.15.1.13 | ColumnhwBraCTPRightThreeParty | read-write | current | Indicates the right flag of three-party. Options: 1. disable(1) -disable 2. enable(2) -enable |
| 1.3.6.1.4.1.2011.6.112.1.15.1.14 | ColumnhwBraCTPRightConf | read-write | current | Indicates the right flag of conf. Options: 1. disable(1) -disable 2. enable(2) -enable |
| 1.3.6.1.4.1.2011.6.112.1.15.1.15 | ColumnhwBraCTPRightCt | read-write | current | Indicates the right flag of ct. Options: 1. disable(1) -disable 2. enable(2) -enable |
| 1.3.6.1.4.1.2011.6.112.1.15.1.16 | ColumnhwBraCTPRightCw | read-write | current | Indicates the right flag of cw. Options: 1. disable(1) -disable 2. enable(2) -enable |
| 1.3.6.1.4.1.2011.6.112.1.15.1.17 | ColumnhwBraCTPRightMcid | read-write | current | Indicates the right flag of mcid. Options: 1. disable(1) -disable 2. enable(2) -enable |
| 1.3.6.1.4.1.2011.6.112.1.15.1.18 | ColumnhwBraCTPRightMwi | read-write | current | Indicates the right flag of mwi. Options: 1. disable(1) -disable 2. enable(2) -enable |
| 1.3.6.1.4.1.2011.6.112.1.15.1.19 | ColumnhwBraCTPRightCliWildcardLen | read-write | current | Indicates the wildcard length of CLI number. 255 means to clear the configuration. |
| 1.3.6.1.4.1.2011.6.112.1.16 | TablehwPraCTPRightConfigTable | not-accessible | current | This table is used to config PRA user's servicedata. The indexes of this table are hwPraCTPRightConfigIndex, hwPraCTPRightPortBindIndex. |
| 1.3.6.1.4.1.2011.6.112.1.16.1 | RowhwPraCTPRightConfigEntry | not-accessible | current | This table is used to config PRA user's servicedata. The indexes of this entry are hwPraCTPRightConfigIndex, hwPraCTPRightPortBindIndex. |
| 1.3.6.1.4.1.2011.6.112.1.16.1.1 | ColumnhwPraCTPRightConfigIndex | not-accessible | current | Indicates the frame/slot/port. 31 0 0010110 | xxxxxxxx | xxxxxx | xxxxxxx | 0000 port frame slot port 0 type The highest 7 bits indicate the type of port, for … |
| 1.3.6.1.4.1.2011.6.112.1.16.1.2 | ColumnhwPraCTPRightPortBindIndex | not-accessible | current | Indicates the telephone number index. |
| 1.3.6.1.4.1.2011.6.112.1.16.1.3 | ColumnhwPraCTPRightAuthName | read-write | current | Indicates the authorization username of sipprauser. The character set is unrestricted. |
| 1.3.6.1.4.1.2011.6.112.1.16.1.4 | ColumnhwPraCTPRightAuthPassword | read-write | current | Indicates the authorization password of sipprauser. The character set is unrestricted. |
| 1.3.6.1.4.1.2011.6.112.1.16.1.5 | ColumnhwPraCTPRightEndConfigIndex | read-write | current | Indicates the end shelf/slot/port. |
| 1.3.6.1.4.1.2011.6.112.1.16.1.6 | ColumnhwPraCTPRightAuthPasswordMode | read-write | current | Indicates the authorization mode of the password for sipprauser. Options: 1. password(1) -authorized by password 2. ha1(2) -authorized by ha1 |
| 1.3.6.1.4.1.2011.6.112.1.16.1.7 | ColumnhwPraCTPRightAuthHA1 | read-write | current | Indicates the authorization HA1 value of sipprauser. The character set is unrestricted. |
| 1.3.6.1.4.1.2011.6.112.1.16.1.8 | ColumnhwPraCTPRightCentrexNo | read-write | current | It is used to set centrex NO. of SipPraUser, 4294967295 means to clear the configuration. |
| 1.3.6.1.4.1.2011.6.112.1.16.1.9 | ColumnhwPraCTPRightCentrexPrefix | read-write | current | Indicates the CentrexPrefix of SipPraUser. |
| 1.3.6.1.4.1.2011.6.112.1.16.1.10 | ColumnhwPraCTPRightCentrexFlag | read-write | current | Indicates the CentrexFlag of SipPraUser. Options: 1. dialDirectly(1) -dial directly 2. dialSecondary(2) -dial secondary |
| 1.3.6.1.4.1.2011.6.112.1.16.1.11 | ColumnhwPraCTPRightMwiMode | read-write | current | Indicates the MwiMode of SipPraUser. Options: 1. deferred(1) -deferred 2. immediate(2) -immediate 3. combine(3) -combine |
| 1.3.6.1.4.1.2011.6.112.1.16.1.12 | ColumnhwPraCTPRightCliWildcardLen | read-write | current | Indicates the wildcard length of CLI number. 255 means to clear the configuration. |
| 1.3.6.1.4.1.2011.6.112.1.17 | TablehwR2CTPConfigTable | not-accessible | current | It is used to configure the service attributes of a R2 port. It is used to add, delete, modify, and query the R2 user with the VSP feature. The index of this t… |
| 1.3.6.1.4.1.2011.6.112.1.17.1 | RowhwR2CTPConfigEntry | not-accessible | current | It is used to configure the service attributes of a R2 port. It is used to add, delete, modify, and query the R2 user with the VSP feature. The index of this e… |
| 1.3.6.1.4.1.2011.6.112.1.17.1.1 | ColumnhwR2CTPConfigIndex | not-accessible | current | Indicates the frame/slot/port. 31 0 0010110 | xxxxxxxx | xxxxxx | xxxxxxx | 0000 port frame slot port 0 type The highest 7 bits indicate the type of port, for … |
| 1.3.6.1.4.1.2011.6.112.1.17.1.2 | ColumnhwR2CTPMgId | read-create | current | Indicates the MG ID. |
| 1.3.6.1.4.1.2011.6.112.1.17.1.3 | ColumnhwR2CTPTerminationID | read-create | current | Indicates the start terminal ID (only the character string of digit type is supported). |
| 1.3.6.1.4.1.2011.6.112.1.17.1.4 | ColumnhwR2CTPSignalProfileIndex | read-write | current | Indicates the R2 signal profile index. |
| 1.3.6.1.4.1.2011.6.112.1.17.1.5 | ColumnhwR2CTPSignalProfileName | read-only | current | Indicates the R2 signal profile name. |
| 1.3.6.1.4.1.2011.6.112.1.17.1.6 | ColumnhwR2CTPRowStatus | read-write | current | Indicates the row status. |
| 1.3.6.1.4.1.2011.6.112.1.17.1.7 | ColumnhwR2CTPPriorityFlag | read-write | current | Indicates terminal priority. Options: 1. cat1(1) -the highest priority 2. cat2(2) -the middle priority 3. cat3(3) -the lowest priority |
| 1.3.6.1.4.1.2011.6.112.1.17.1.8 | ColumnhwR2CTPTelNo | read-create | current | Indicates telphone number. |
| 1.3.6.1.4.1.2011.6.112.1.17.1.9 | ColumnhwR2CTPUserGroupid | read-write | current | It indicates the user group ID. -1 indicates clear the user group info. |
| 1.3.6.1.4.1.2011.6.112.1.17.1.10 | ColumnhwR2CTPDigitMapGroupName | read-write | current | It indicates the digitmap group name. |
| 1.3.6.1.4.1.2011.6.112.1.17.1.11 | ColumnhwR2CTPRemoteRingFlag | read-write | current | Indicates RemoteRing. Options: 1. disable(1) -disable receive remote early media 2. enable(2) -enable receive remote early media 3. null(-1) -invalid value |
| 1.3.6.1.4.1.2011.6.112.1.17.1.12 | ColumnhwR2CTPConfigIncomingcallChangeName | read-write | current | It indicates the number change name of incoming call. |
| 1.3.6.1.4.1.2011.6.112.1.17.1.13 | ColumnhwR2CTPConfigOutgoingcallChangeName | read-write | current | It indicates the number change name of outgoing call. |
| 1.3.6.1.4.1.2011.6.112.1.17.1.14 | ColumnhwR2CTPConfigDefaultCli | read-write | current | It indicates the default cli number of outgoing call. |
| 1.3.6.1.4.1.2011.6.112.1.17.1.15 | ColumnhwR2CTPConfigDefaultCliMode | read-write | current | Indicates the mode of cli number. Options: 1. match(1) -match 2. overwrite(2) -overwrite 3. null(0) -invalid value Default: match(1) |
| 1.3.6.1.4.1.2011.6.112.1.17.1.16 | ColumnhwR2CTPConfigCliGroup | read-write | current | It indicates the cli-group name of outgoing call. |
| 1.3.6.1.4.1.2011.6.112.1.17.1.17 | ColumnhwR2CTPBChnCallRight | read-write | current | Indicates the R2 B channel's incoming(PBX Indicates the permissions of B channels 0-31 from left to right. Meaning of a single byte: 0: indicates that the B ch… |
| 1.3.6.1.4.1.2011.6.112.1.18 | TablehwR2CTPOperTable | not-accessible | current | It is used to perform operations on service attributes of a R2 user port. Through this table, you can perform maintenance operations on a R2 user with the VSP … |
| 1.3.6.1.4.1.2011.6.112.1.18.1 | RowhwR2CTPOperEntry | not-accessible | current | It is used to perform operations on service attributes of a R2 user port. Through this table, you can perform maintenance operations on a R2 user with the VSP … |
| 1.3.6.1.4.1.2011.6.112.1.18.1.1 | ColumnhwR2CTPOperIndex | not-accessible | current | Indicates the frame/slot/port. 31 0 0010110 | xxxxxxxx | xxxxxx | xxxxxxx | 0000 port frame slot port 0 type The highest 7 bits indicate the type of port, for … |
| 1.3.6.1.4.1.2011.6.112.1.18.1.2 | ColumnhwR2CTPBchnSrvState | read-only | current | Indicates the running status of the service layer of the 32 B channels of the R2. Each character corresponds to a timeslot. The value of the character is as fo… |
| 1.3.6.1.4.1.2011.6.112.1.18.1.3 | ColumnhwR2CTPBchnAdminState | read-only | current | Indicates the administration status of the service layer of the 32 B channels of the R2. Each character corresponds to a timeslot. The value of the character i… |
| 1.3.6.1.4.1.2011.6.112.1.18.1.4 | ColumnhwR2CTPAdminOper | read-write | current | Indicates the service operation. Options: 1. endService(1) -stop service 2. startService(2) -start service 3. deferEndingService(3) -stop service gracefully |
| 1.3.6.1.4.1.2011.6.112.1.18.1.5 | ColumnhwR2CTPMaxCobTime | read-write | current | Indicates length of waiting timer for R2 user defer end service. 0 is not allowed to set. Default: 240 Unit: minute |
| 1.3.6.1.4.1.2011.6.112.1.18.1.6 | ColumnhwR2CTPOnexpire | read-write | current | Indicates disposal mode when R2 user defer end service timeout. Options: 1. force(1) -force end service 2. cancel(2) -cancel end service Default: force(1) |
| 1.3.6.1.4.1.2011.6.112.1.19 | TablehwR2CTPRightConfigTable | not-accessible | current | This table is used to config R2 user's right. The indexes of this table are hwR2CTPRightConfigIndex, hwR2CTPRightPortBindIndex. |
| 1.3.6.1.4.1.2011.6.112.1.19.1 | RowhwR2CTPRightConfigEntry | not-accessible | current | This table is used to config R2 user's right. The indexes of this entry are hwR2CTPRightConfigIndex, hwR2CTPRightPortBindIndex. |
| 1.3.6.1.4.1.2011.6.112.1.19.1.1 | ColumnhwR2CTPRightConfigIndex | not-accessible | current | Indicates the frame/slot/port. 31 0 0011000 | xxxxxxxx | xxxxxx | xxxxxxx | 0000 port frame slot port 0 type The highest 7 bits indicate the type of port, for … |
| 1.3.6.1.4.1.2011.6.112.1.19.1.2 | ColumnhwR2CTPRightPortBindIndex | not-accessible | current | Indicates the telephone number index. |
| 1.3.6.1.4.1.2011.6.112.1.19.1.3 | ColumnhwR2CTPRightAuthName | read-write | current | Indicates the authorization username of sipR2user. The character set is unrestricted. |
| 1.3.6.1.4.1.2011.6.112.1.19.1.4 | ColumnhwR2CTPRightAuthPassword | read-write | current | Indicates the authorization password of sipR2user. The character set is unrestricted. |
| 1.3.6.1.4.1.2011.6.112.1.19.1.5 | ColumnhwR2CTPRightAuthPasswordMode | read-write | current | Indicates the authorization mode of the password for sipR2user. Options: 1. password(1) -authorized by password 2. ha1(2) -authorized by ha1 |
| 1.3.6.1.4.1.2011.6.112.1.19.1.6 | ColumnhwR2CTPRightAuthHA1 | read-write | current | Indicates the authorization HA1 value of sipR2user. The character set is unrestricted. |
| 1.3.6.1.4.1.2011.6.112.1.20 | TablehwPraBchnCTPConfigTable | not-accessible | current | This table is used to configure B channels' attributes for PRA ports. The indexes of this table are hwPraBchnCTPConfigIndex, hwPraBchnCTPBchnID. |
| 1.3.6.1.4.1.2011.6.112.1.20.1 | RowhwPraBchnCTPConfigEntry | not-accessible | current | This table is used to configure B channels' attributes for PRA ports. The indexes of this entry are hwPraBchnCTPConfigIndex, hwPraBchnCTPBchnID. |
| 1.3.6.1.4.1.2011.6.112.1.20.1.1 | ColumnhwPraBchnCTPConfigIndex | not-accessible | current | Indicates the frame/slot/port. 22 0 0010110 | xxxxxxxx | xxxxxx | xxxxxxx | 0000 port frame slot port 0 type The highest 7 bits indicate the type of port, for … |
| 1.3.6.1.4.1.2011.6.112.1.20.1.2 | ColumnhwPraBchnCTPBchnID | not-accessible | current | Indicates a B channel's ID. In the case of a batch configuration, this node is set to -1 and hwPraBchnCTPBchnMask is carried to indicate B channel's range. |
| 1.3.6.1.4.1.2011.6.112.1.20.1.3 | ColumnhwPraBchnCTPBchnMask | read-write | current | Indicates B channels' ID. |
| 1.3.6.1.4.1.2011.6.112.1.20.1.4 | ColumnhwPraBchnCTPConfigDefaultCli | read-write | current | It indicates the default cli number of outgoing call. |
| 1.3.6.1.4.1.2011.6.112.1.20.1.5 | ColumnhwPraBchnCTPConfigDefaultCliMode | read-write | current | Indicates the mode of cli number. Options: 1. match(1) - match 2. overwrite(2) -overwrite 3. null(0) -invalid value Default: match(1) |
| 1.3.6.1.4.1.2011.6.112.1.21 | TablehwR2BchnCTPConfigTable | not-accessible | current | This table is used to configure B channels' attributes for R2 ports. The indexes of this table are hwR2BchnCTPConfigIndex, hwR2BchnCTPBchnID. |
| 1.3.6.1.4.1.2011.6.112.1.21.1 | RowhwR2BchnCTPConfigEntry | not-accessible | current | This table is used to configure B channels' attributes for R2 ports. The indexes of this entry are hwR2BchnCTPConfigIndex, hwR2BchnCTPBchnID. |
| 1.3.6.1.4.1.2011.6.112.1.21.1.1 | ColumnhwR2BchnCTPConfigIndex | not-accessible | current | Indicates the frame/slot/port. 22 0 0010110 | xxxxxxxx | xxxxxx | xxxxxxx | 0000 port frame slot port 0 type The highest 7 bits indicate the type of port, for … |
| 1.3.6.1.4.1.2011.6.112.1.21.1.2 | ColumnhwR2BchnCTPBchnID | not-accessible | current | Indicates a B channel's ID. In the case of a batch configuration, this node is set to -1 and hwR2BchnCTPBchnMask is carried to indicate B channel's range. |
| 1.3.6.1.4.1.2011.6.112.1.21.1.3 | ColumnhwR2BchnCTPBchnMask | read-write | current | Indicates B channels' ID. |
| 1.3.6.1.4.1.2011.6.112.1.21.1.4 | ColumnhwR2BchnCTPConfigDefaultCli | read-write | current | It indicates the default cli number of outgoing call. |
| 1.3.6.1.4.1.2011.6.112.1.21.1.5 | ColumnhwR2BchnCTPConfigDefaultCliMode | read-write | current | Indicates the mode of cli number. Options: 1. match(1) - match 2. overwrite(2) -overwrite 3. null(0) -invalid value Default: match(1) |
| 1.3.6.1.4.1.2011.6.112.1.22 | TablehwVoiceUserVBDToneDetectTable | not-accessible | current | This table is used to config the parameters of VBD tone detect. The index of this table is hwVoiceUserVBDToneDetectIndex. |
| 1.3.6.1.4.1.2011.6.112.1.22.1 | RowhwVoiceUserVBDToneDetectEntry | not-accessible | current | This table is used to config the parameters of VBD tone detect. The index of this entry is hwVoiceUserVBDToneDetectIndex. |
| 1.3.6.1.4.1.2011.6.112.1.22.1.1 | ColumnhwVoiceUserVBDToneDetectIndex | not-accessible | current | Indicates the frame/slot/port. 24 0 0011000 | xxxxxxxx | xxxxxx | xxxxxxx | 0000 port frame slot port 0 type The highest 7 bits indicate the type of port, for … |
| 1.3.6.1.4.1.2011.6.112.1.22.1.2 | ColumnhwVoiceUserVBDV21Low | read-write | current | Indicates the mode of V.21 low tone detect(980Hz). Options: 1. enable(1) - enable 2. disable(2) -disable 3. adapt(3) -adapt Default: adapt(3) |
| 1.3.6.1.4.1.2011.6.112.1.22.1.3 | ColumnhwVoiceUserVBDV21High | read-write | current | Indicates the mode of V.21 high tone detect(1650Hz). Options: 1. enable(1) - enable 2. disable(2) -disable 3. adapt(3) -adapt Default: adapt(3) |
| 1.3.6.1.4.1.2011.6.112.1.22.1.4 | ColumnhwVoiceUserVBDBell103Mark | read-write | current | Indicates the mode of bell 103 mark tone detect(1270Hz). Options: 1. enable(1) - enable 2. disable(2) -disable 3. adapt(3) -adapt Default: adapt(3) |
| 1.3.6.1.4.1.2011.6.112.1.22.1.5 | ColumnhwVoiceUserVBDBellANSFlag | read-write | current | Indicates the mode of bell aNS tone detect(2225Hz). Options: 1. enable(1) - enable 2. disable(2) -disable 3. adapt(3) -adapt Default: adapt(3) |
| 1.3.6.1.4.1.2011.6.112.1.22.1.6 | ColumnhwVoiceUserVBDV22USB1SingleFrequency | read-write | current | Indicates the mode of V.22 USB1 single-frequency tone detect(2250Hz). Options: 1. enable(1) - enable 2. disable(2) -disable 3. adapt(3) -adapt Default: adapt(3) |
| 1.3.6.1.4.1.2011.6.112.1.22.1.7 | ColumnhwVoiceUserVBDV22USB1DualFrequency | read-write | current | Indicates the mode of V.22 USB1 dual-frequency tone detect(2250Hz&2850Hz). Options: 1. enable(1) - enable 2. disable(2) -disable 3. adapt(3) -adapt Default: ad… |
| 1.3.6.1.4.1.2011.6.112.1.22.1.8 | ColumnhwVoiceUserVBDV22USB1TriFrequency | read-write | current | Indicates the mode of V.22 USB1 tri-frequency tone detect(2250Hz&2850Hz&1800Hz). Options: 1. enable(1) - enable 2. disable(2) -disable 3. adapt(3) -adapt Defau… |
| 1.3.6.1.4.1.2011.6.112.1.22.1.9 | ColumnhwVoiceUserVBDV25CT | read-write | current | Indicates the mode of V.25 CT tone detect(1300Hz). Options: 1. enable(1) - enable 2. disable(2) -disable 3. adapt(3) -adapt Default: adapt(3) |
| 1.3.6.1.4.1.2011.6.112.1.22.1.10 | ColumnhwVoiceUserVBDV32AA | read-write | current | Indicates the mode of V.32 AA tone detect(1800Hz). Options: 1. enable(1) - enable 2. disable(2) -disable 3. adapt(3) -adapt Default: adapt(3) |
| 1.3.6.1.4.1.2011.6.112.1.22.1.11 | ColumnhwVoiceUserVBDV18AnnexA | read-write | current | Indicates the mode of V.18 Annex A tone detect(1400Hz). Options: 1. enable(1) - enable 2. disable(2) -disable 3. adapt(3) -adapt Default: adapt(3) |
| 1.3.6.1.4.1.2011.6.112.1.22.1.12 | ColumnhwVoiceUserVBDV8bisCre | read-write | current | Indicates the mode of V.8bis cre tone detect(1375Hz&2002Hz). Options: 1. enable(1) - enable 2. disable(2) -disable 3. adapt(3) -adapt Default: adapt(3) |
| 1.3.6.1.4.1.2011.6.112.2 | NodehwIASVoiceUserTrapsVbOids | |||
| 1.3.6.1.4.1.2011.6.112.2.1 | ScalarhwLightTrapPortNum | accessible-for-notify | current | The number of the ports send light state trap. |
| 1.3.6.1.4.1.2011.6.112.2.2 | ScalarhwLightTrapPortInfo | accessible-for-notify | current | The position and state of the ports. |
| 1.3.6.1.4.1.2011.6.112.2.3 | ScalarhwVoiceUserFrame | accessible-for-notify | current | Indicate the frame that user is configed at. -1 indicate invalid value. |
| 1.3.6.1.4.1.2011.6.112.2.4 | ScalarhwVoiceUserSlot | accessible-for-notify | current | Indicate the slot that user is configed at. -1 indicate invalid value. |
| 1.3.6.1.4.1.2011.6.112.2.5 | ScalarhwVoiceUserPort | accessible-for-notify | current | Indicate the port that user is configed at. -1 indicate invalid value. |
| 1.3.6.1.4.1.2011.6.112.2.6 | ScalarhwVoiceUserOperateType | accessible-for-notify | current | Indicate the port that user operate type. Options: 1. userDataAdd(1) -add user data 2. userDataDelete(2) -delete user data 3. userDataModify(3) -modify user da… |
| 1.3.6.1.4.1.2011.6.112.2.7 | ScalarhwVoiceUserPortNum | accessible-for-notify | current | The number of the ports send by user config change trap. |
| 1.3.6.1.4.1.2011.6.112.2.8 | ScalarhwVoiceUserTsn | accessible-for-notify | current | Indicate the time slot ID that user is configed at. -1 indicate invalid value. |
| 1.3.6.1.4.1.2011.6.112.3 | NodehwIASVoiceUserTraps | |||
| 1.3.6.1.4.1.2011.6.112.3.1 | NodehwIASVoiceUserCommonTraps | |||
| 1.3.6.1.4.1.2011.6.112.3.1.1 | NodehwIASVoiceUserPortTraps | |||
| 1.3.6.1.4.1.2011.6.112.3.1.1.0 | NodehwIASVoiceUserPortTrapsPrefix | |||
| 1.3.6.1.4.1.2011.6.112.3.1.1.0.1 | NotificationhwIASVoiceUserPortLightTrap | current | This notification indicates that reset result of the SIP media gateway. | |
| 1.3.6.1.4.1.2011.6.112.3.1.1.0.2 | NotificationhwIASVoiceUserPortPstnDataChangeTrap | current | This notification indicates that data of pstn user have been changed. | |
| 1.3.6.1.4.1.2011.6.112.3.1.1.0.3 | NotificationhwIASVoiceUserPortBraDataChangeTrap | current | This notification indicates that data of bra user have been changed. | |
| 1.3.6.1.4.1.2011.6.112.3.1.1.0.4 | NotificationhwIASVoiceUserPortPraDataChangeTrap | current | This notification indicates that data of pra user have been changed. | |
| 1.3.6.1.4.1.2011.6.112.3.1.1.0.5 | NotificationhwIASVoiceUserPortPmbsDataChangeTrap | current | This notification indicates that data of pmbs user have been changed. | |
| 1.3.6.1.4.1.2011.6.112.3.1.1.0.6 | NotificationhwIASVoiceUserPortR2DataChangeTrap | current | This notification indicates that data of R2 user have been changed. | |
| 1.3.6.1.4.1.2011.6.112.3.2 | NodehwIASVoiceUserAlarmTraps | |||
| 1.3.6.1.4.1.2011.6.112.3.2.1 | NodehwIASVoiceUserPortAlarmTraps | |||
| 1.3.6.1.4.1.2011.6.112.3.2.1.0 | NodehwIASVoiceUserPortAlarmTrapsPrefix | |||
| 1.3.6.1.4.1.2011.6.112.3.2.1.0.1 | NotificationhwIASVoiceUserRemoteBlockTrap | current | This notification indicates that the user is remote blocked. | |
| 1.3.6.1.4.1.2011.6.112.3.2.1.0.2 | NotificationhwIASVoiceUserUnblockTrap | current | This notification indicates that the user is unblocked. | |
| 1.3.6.1.4.1.2011.6.112.3.2.1.0.3 | NotificationhwIASVoiceUserlockedTrap | current | This notification indicates that the user is locked. | |
| 1.3.6.1.4.1.2011.6.112.3.2.1.0.4 | NotificationhwIASVoiceUserUnlockedTrap | current | This notification indicates that the user is unlocked. | |
| 1.3.6.1.4.1.2011.6.112.3.2.2 | NodehwIASVoiceUserTsnAlarmTraps | |||
| 1.3.6.1.4.1.2011.6.112.3.2.2.0 | NodehwIASVoiceUserTsnAlarmTrapsPrefix | |||
| 1.3.6.1.4.1.2011.6.112.3.2.2.0.1 | NotificationhwIASVoiceUserTsnBlockTrap | current | This notification indicates that the user time slot is blocked. | |
| 1.3.6.1.4.1.2011.6.112.3.2.2.0.2 | NotificationhwIASVoiceUserTsnUnBlockTrap | current | This notification indicates that the user time slot is unblocked. |