HUAWEI-VOIP-ONT-MIB
472 objects
The entity of ont configuration and control.
Imported Objects
| HUAWEI-DEVICE-MIB | hwFrameIndex hwPortIndex hwSlotIndex |
| HUAWEI-MIB | huaweiUtility |
| SNMPv2-CONF | MODULE-COMPLIANCE NOTIFICATION-GROUP OBJECT-GROUP |
| SNMPv2-SMI | Counter32 Integer32 IpAddress MODULE-IDENTITY NOTIFICATION-TYPE OBJECT-TYPE private TimeTicks Unsigned32 |
| SNMPv2-TC | DisplayString RowStatus TEXTUAL-CONVENTION |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.2011.6.36 | IdentityhwVoip | value | The entity of ont configuration and control. | |
| 1.3.6.1.4.1.2011.6.36.11 | NodehwVoipOntObjects | |||
| 1.3.6.1.4.1.2011.6.36.11.1 | TablehwPstnStatusTable | not-accessible | current | The PSTN states table ,for Mib display only The indexes of this table are hwVoiceIfIndex, hwVoiceOntIndex,hwVoiceOntPortIndex |
| 1.3.6.1.4.1.2011.6.36.11.1.1 | RowhwPstnStatusEntry | not-accessible | current | The PSTN states table ,for Mib display only The indexes of this entry are hwVoiceIfIndex, hwVoiceOntIndex,hwVoiceOntPortIndex |
| 1.3.6.1.4.1.2011.6.36.11.1.1.1 | ColumnhwVoiceIfIndex | accessible-for-notify | current | ifIndex |
| 1.3.6.1.4.1.2011.6.36.11.1.1.2 | ColumnhwVoiceOntIndex | accessible-for-notify | current | ONT Index |
| 1.3.6.1.4.1.2011.6.36.11.1.1.3 | ColumnhwVoiceOntPortIndex | accessible-for-notify | current | Port in ONT |
| 1.3.6.1.4.1.2011.6.36.11.1.1.4 | ColumnhwLineStatus | read-only | current | hwLineStatus Options: 1. registering(1) -indicates the port is registering now 2. idle(2) -indicates the port is idle 3. picking(3) -indicates pick up 4. diali… |
| 1.3.6.1.4.1.2011.6.36.11.1.1.5 | ColumnhwServiceStatus | read-only | current | Service Status Options: 1. endLocal(1) -indicates end service at local,occured by disable users 2. endRemote(2) -indicates end service at other side,occured by… |
| 1.3.6.1.4.1.2011.6.36.11.1.1.6 | ColumnhwPortCodec | read-only | current | Ont Pstn Port Codec Options: 1.g711a(1) -indicates the codec mode is G.711A 2.g729(2) -indicates the codec mode is g729 3.g711u(3) -indicates the codec mode is… |
| 1.3.6.1.4.1.2011.6.36.11.2 | TablehwMgStatusTable | not-accessible | current | The Mg states table ,for Mib display only The indexes of this table are hwVoiceIfIndex, hwVoiceOntIndex, hwVoiceOntMgId |
| 1.3.6.1.4.1.2011.6.36.11.2.1 | RowhwMgStatusEntry | not-accessible | current | The Mg states table ,for Mib display only The indexes of this entry are hwVoiceIfIndex, hwVoiceOntIndex, hwVoiceOntMgId |
| 1.3.6.1.4.1.2011.6.36.11.2.1.1 | ColumnhwVoiceOntMgId | accessible-for-notify | current | MgId in ONT |
| 1.3.6.1.4.1.2011.6.36.11.2.1.2 | ColumnhwMgStatus | read-only | current | Mg Status. Options: 1.registering(1) -indicates the mg status is registering. 2.registerok(2) -indicates the mg status is register sucessfully 3.malfunction(3)… |
| 1.3.6.1.4.1.2011.6.36.11.3 | TablehwOntPotsTemplateTable | not-accessible | current | The Table of POTS profile The index of this table is hwOntPotsTemplateIndex |
| 1.3.6.1.4.1.2011.6.36.11.3.1 | RowhwOntPotsTemplateEntry | not-accessible | current | The Table of POTS profile The index of this entry is hwOntPotsTemplateIndex |
| 1.3.6.1.4.1.2011.6.36.11.3.1.1 | ColumnhwOntPotsTemplateIndex | not-accessible | current | The Profile ID of POTS profile Table |
| 1.3.6.1.4.1.2011.6.36.11.3.1.2 | ColumnhwOntPotsTemplateName | read-write | current | The Profile Name of POTS profile Table. |
| 1.3.6.1.4.1.2011.6.36.11.3.1.3 | ColumnhwOntPotsImpedance | read-write | current | Impedance. Options: 1 :600 Ohms 2 :900 Ohms 3 :C1=150 nF, R1=750 Ohm, R2=270 Ohm 4 :C1=115 nF, R1=820 Ohm, R2=220 Ohm 5 :C1=230 nF, R1=1050 Ohm, R2=320 Ohm 65 … |
| 1.3.6.1.4.1.2011.6.36.11.3.1.4 | ColumnhwOntPotsSendGain | read-write | current | param value of sendgain Options: 1 :-12.0 dB 2 :-11.5 dB 3 :-11.0 dB 4 :-10.5 dB 5 :-10.0 dB 6 :-9.5 dB 7 :-9.0 dB 8 :-8.5 dB 9 :-8.0 dB 10 :-7.5 dB 11 :-7.0 d… |
| 1.3.6.1.4.1.2011.6.36.11.3.1.5 | ColumnhwOntPotsRecvGain | read-write | current | param value of recvgain Options: 1 :-12.0 dB 2 :-11.5 dB 3 :-11.0 dB 4 :-10.5 dB 5 :-10.0 dB 6 :-9.5 dB 7 :-9.0 dB 8 :-8.5 dB 9 :-8.0 dB 10 :-7.5 dB 11 :-7.0 d… |
| 1.3.6.1.4.1.2011.6.36.11.3.1.6 | ColumnhwOntPotsPotsSignaling | read-write | current | pots signaling Options: 1.loopStart(1) -indicates the pots signaling is loop-start 2.groundStart(2) -indicates the pots signaling is ground-start 3.loopReverse… |
| 1.3.6.1.4.1.2011.6.36.11.3.1.7 | ColumnhwOntPotsRowStatus | read-create | current | Options: 1.active(1) -indicates active 2.notInService(2) -indicates not in service 3.notReady(3) -indicates not ready 4.createAndGo(4) -indicates create and go… |
| 1.3.6.1.4.1.2011.6.36.11.3.1.8 | ColumnhwOntPotsTemplateBindTimes | read-only | current | The bind time of this profile |
| 1.3.6.1.4.1.2011.6.36.11.4 | TablehwOntSipAgentTemplateTable | not-accessible | current | Sipagent profile table. The index of this table is hwOntSipAgentTemplateIndex |
| 1.3.6.1.4.1.2011.6.36.11.4.1 | RowhwOntSipAgentTemplateEntry | not-accessible | current | Sipagent profile table. The index of this entry is hwOntSipAgentTemplateIndex |
| 1.3.6.1.4.1.2011.6.36.11.4.1.1 | ColumnhwOntSipAgentTemplateIndex | not-accessible | current | The profile ID of sipagent profile table. |
| 1.3.6.1.4.1.2011.6.36.11.4.1.2 | ColumnhwOntSipAgentTemplateName | read-write | current | The profile Name of sipagent profile table. |
| 1.3.6.1.4.1.2011.6.36.11.4.1.3 | ColumnhwOntSipAgentProxyUri | read-write | current | Proxy server uri. |
| 1.3.6.1.4.1.2011.6.36.11.4.1.4 | ColumnhwOntSipAgentRtpPortMin | read-write | current | The min udp port of RTP. Default: 50000 |
| 1.3.6.1.4.1.2011.6.36.11.4.1.5 | ColumnhwOntSipAgentRtpPortMax | read-write | current | The max udp port of RTP. Default: 60000 |
| 1.3.6.1.4.1.2011.6.36.11.4.1.6 | ColumnhwOntSipAgentRtpDscp | read-write | current | The DSCP of Rtp. Default: 46 |
| 1.3.6.1.4.1.2011.6.36.11.4.1.7 | ColumnhwOntSipAgentSignalTransMode | read-write | current | Transfer mode of signal. Options: 1.tcp(1) -indicates the signal transfer mode is tcp 2.udp(2) -indicates the signal transfer mode is udp Default:udp(2) |
| 1.3.6.1.4.1.2011.6.36.11.4.1.8 | ColumnhwOntSipAgentSignalPortId | read-write | current | The udp port of signal. |
| 1.3.6.1.4.1.2011.6.36.11.4.1.9 | ColumnhwOntSipAgentSignalDscp | read-write | current | The DSCP of signal. Default: 24 |
| 1.3.6.1.4.1.2011.6.36.11.4.1.10 | ColumnhwOntSipAgentRegisterUri | read-write | current | The URI of register server. |
| 1.3.6.1.4.1.2011.6.36.11.4.1.11 | ColumnhwOntSipAgentRegExpiration | read-write | current | The valid time of register. |
| 1.3.6.1.4.1.2011.6.36.11.4.1.12 | ColumnhwOntSipAgentReRegStartTime | read-write | current | The time before refresh when reg time will timeout. |
| 1.3.6.1.4.1.2011.6.36.11.4.1.13 | ColumnhwOntSipAgentVoicemailUri | read-write | current | The URI of voicemail server. |
| 1.3.6.1.4.1.2011.6.36.11.4.1.14 | ColumnhwOntSipAgentVoicemailSubExpir | read-write | current | The voicemail's valid time of reg. |
| 1.3.6.1.4.1.2011.6.36.11.4.1.15 | ColumnhwOntSipAgentConfFactoryUri | read-write | current | The uri of Confence Factory's server. |
| 1.3.6.1.4.1.2011.6.36.11.4.1.16 | ColumnhwOntSipAgentBridgedLineAgentUri | read-write | current | The BridgedLine's Server URI. |
| 1.3.6.1.4.1.2011.6.36.11.4.1.17 | ColumnhwOntSipAgentUserAuthRealm | read-write | current | The user Realm. |
| 1.3.6.1.4.1.2011.6.36.11.4.1.18 | ColumnhwOntSipAgentRowStatus | read-create | current | Options: 1.active(1) -indicates active 2.notInService(2) -indicates not in service 3.notReady(3) -indicates not ready 4.createAndGo(4) -indicates create and go… |
| 1.3.6.1.4.1.2011.6.36.11.4.1.19 | ColumnhwOntSipAgentTemplateBindTimes | read-only | current | The bind time of this profile. |
| 1.3.6.1.4.1.2011.6.36.11.4.1.20 | ColumnhwOntSipAgentHomeDomain | read-write | current | The Home Domain. |
| 1.3.6.1.4.1.2011.6.36.11.4.1.21 | ColumnhwOntSipAgentServerType | read-write | current | The server type. It is valid for EPON ONT and invalid for GPON ONT. Options: 1.general(1) -indicates general SIP server 2.ims(2) -indicates IMS Default:general… |
| 1.3.6.1.4.1.2011.6.36.11.5 | TablehwOntDigitMapTemplateTable | not-accessible | current | The DigitMap profile table. The index of this table is hwOntDigitMapTemplateIndex |
| 1.3.6.1.4.1.2011.6.36.11.5.1 | RowhwOntDigitMapTemplateEntry | not-accessible | current | The DigitMap profile table. The index of this entry is hwOntDigitMapTemplateIndex |
| 1.3.6.1.4.1.2011.6.36.11.5.1.1 | ColumnhwOntDigitMapTemplateIndex | not-accessible | current | The profile ID digitmap table. |
| 1.3.6.1.4.1.2011.6.36.11.5.1.2 | ColumnhwOntDigitMapTemplateName | read-write | current | The profile Name digitmap table. |
| 1.3.6.1.4.1.2011.6.36.11.5.1.3 | ColumnhwOntDigitMapCriticalDialTime | read-write | current | The Critical Dial Time. Default: 4000 Unit: ms |
| 1.3.6.1.4.1.2011.6.36.11.5.1.4 | ColumnhwOntDigitMapPartialDialTime | read-write | current | The Partial Dial Time. Default: 16000 Unit: ms |
| 1.3.6.1.4.1.2011.6.36.11.5.1.5 | ColumnhwOntDigitMapFormat | read-write | current | The Format of Digitmap. Options: 1. notDefined(1) -indicates the digital format is not defined 2. h248Format(2) -indicates the digital format is h248 3. nscFor… |
| 1.3.6.1.4.1.2011.6.36.11.5.1.6 | ColumnhwOntDigitMapRowStatus | read-create | current | Options: 1.active(1) -indicates active 2.notInService(2) -indicates not in service 3.notReady(3) -indicates not ready 4.createAndGo(4) -indicates create and go… |
| 1.3.6.1.4.1.2011.6.36.11.5.1.7 | ColumnhwOntDigitMapTemplateBindTimes | read-only | current | The bind time of this profile. |
| 1.3.6.1.4.1.2011.6.36.11.5.1.8 | ColumnhwOntDigitMapRohTime | read-write | current | The Roh Time. Default: 6 Unit: s |
| 1.3.6.1.4.1.2011.6.36.11.6 | TablehwOntDigitMapTemplateTokenTable | not-accessible | current | The digitmap token table. The indexes of this table are hwOntDigitMapTemplateIndex, hwOntDigitMapTokenId |
| 1.3.6.1.4.1.2011.6.36.11.6.1 | RowhwOntDigitMapTemplateTokenEntry | not-accessible | current | The digitmap token table. The indexes of this entry are hwOntDigitMapTemplateIndex, hwOntDigitMapTokenId |
| 1.3.6.1.4.1.2011.6.36.11.6.1.1 | ColumnhwOntDigitMapTokenId | not-accessible | current | The digitmap token Id. |
| 1.3.6.1.4.1.2011.6.36.11.6.1.2 | ColumnhwOntDigitMapToken | read-write | current | The digitmap token body. |
| 1.3.6.1.4.1.2011.6.36.11.6.1.3 | ColumnhwOntDigitMapTokenRowStatus | read-write | current | Options: 1.active(1) -indicates active 2.notInservice(2) -indicates not in service 3.notReady(3) -indicates not ready 4.createAndGo(4) -indicates create and go… |
| 1.3.6.1.4.1.2011.6.36.11.7 | NodehwOntGlbMediaAttributeTable | |||
| 1.3.6.1.4.1.2011.6.36.11.7.1 | ScalarhwOntFaxMode | read-write | current | fax mode. Options: 1.passthru(1) -indicates the fax mode is passthrough 2.t38(2) -indicates the fax mode is T38 defalut: t38 |
| 1.3.6.1.4.1.2011.6.36.11.7.2 | ScalarhwOntOrder1stCodec | read-write | current | codec of order 1 defalut: 8 |
| 1.3.6.1.4.1.2011.6.36.11.7.3 | ScalarhwOntOrder1stPacketPeriod | read-write | current | packet period of order 1, Options: 1.time10ms(1) -indicates the packet period is 10ms 2.time15ms(2) -indicates the packet period is 15ms 3.time20ms(3) -indicat… |
| 1.3.6.1.4.1.2011.6.36.11.7.4 | ScalarhwOntOrder1stSilenceFlag | read-write | current | silence suppression of order 1, Options: 1.off(1) -indicates the silence suppression is off 2.on(2) -indicates the silence suppression is on Defalut: off(1) |
| 1.3.6.1.4.1.2011.6.36.11.7.5 | ScalarhwOntOrder2stCodec | read-write | current | codec of order 2, Default: 0 |
| 1.3.6.1.4.1.2011.6.36.11.7.6 | ScalarhwOntOrder2stPacketPeriod | read-write | current | packet period of order 2, Options: 1.time10ms(1) -indicates the packet period is 10ms 2.time15ms(2) -indicates the packet period is 15ms 3.time20ms(3) -indicat… |
| 1.3.6.1.4.1.2011.6.36.11.7.7 | ScalarhwOntOrder2stSilenceFlag | read-write | current | silence suppression of order 2, Options: 1.off(1) -indicates the silence suppression is off 2.on(2) -indicates the silence suppression is on Defalut: off(1) |
| 1.3.6.1.4.1.2011.6.36.11.7.8 | ScalarhwOntOrder3stCodec | read-write | current | codec of order 3, defalut: 18 |
| 1.3.6.1.4.1.2011.6.36.11.7.9 | ScalarhwOntOrder3stPacketPeriod | read-write | current | packet period of order 3. Options: 1.time10ms(1) -indicates the packet period is 10ms 2.time15ms(2) -indicates the packet period is 15ms 3.time20ms(3) -indicat… |
| 1.3.6.1.4.1.2011.6.36.11.7.10 | ScalarhwOntOrder3stSilenceFlag | read-write | current | silence suppression of order 3. Options: 1.off(1) -indicates the silence suppression is off 2.on(2) -indicates the silence suppression is on Defalut: off(1) |
| 1.3.6.1.4.1.2011.6.36.11.7.11 | ScalarhwOntOrder4stCodec | read-write | current | codec of order 4, defalut: 9 |
| 1.3.6.1.4.1.2011.6.36.11.7.12 | ScalarhwOntOrder4stPacketPeriod | read-write | current | packet period of order 4, Options: 1.time10ms(1) -indicates the packet period is 10ms 2.time15ms(2) -indicates the packet period is 15ms 3.time20ms(3) -indicat… |
| 1.3.6.1.4.1.2011.6.36.11.7.13 | ScalarhwOntOrder4stSilenceFlag | read-write | current | silence suppression of order 4, Options: 1.off(1) -indicates the silence suppression is off 2.on(2) -indicates the silence suppression is on Defalut: off(1) |
| 1.3.6.1.4.1.2011.6.36.11.7.14 | ScalarhwOntOobDtmfFlag | read-write | current | Oob Dtmf Flag, Options: 1.disable(1) -indicates the Oob DTMF is disable 2.enable(2) -indicates the Oob DTMF is enable Defalut: disable(1) |
| 1.3.6.1.4.1.2011.6.36.11.7.15 | ScalarhwOntAnnouncementType | read-write | current | Announcement after off hook time out, Options: 1.silence(1) -indicates play the voice of silence after off hook time out 2.reordertone(2) -indicates play the v… |
| 1.3.6.1.4.1.2011.6.36.11.7.16 | ScalarhwOntJitterBuffTarget | read-write | current | target value of jitter buffer. |
| 1.3.6.1.4.1.2011.6.36.11.7.17 | ScalarhwOntJitterBuffMax | read-write | current | max value of jitter buffer. |
| 1.3.6.1.4.1.2011.6.36.11.7.18 | ScalarhwOntEchoFlag | read-write | current | echo flag. Options: 1.off(1) -indicates the echo flag is off 2.on(2) -indicates the echo flag is on Defalut: on(2) |
| 1.3.6.1.4.1.2011.6.36.11.7.19 | ScalarhwOntPstnProtocolVariant | read-write | current | country code, means geography location, Options: Indicate the E.164 country code Defalut: 0 |
| 1.3.6.1.4.1.2011.6.36.11.7.20 | ScalarhwOntPiggybackEventFlag | read-write | current | whether process piggyback events or not, Options: 1.disable(1) -indicates don's process piggyback events 2.enable(2) -indicates process piggyback events Defalu… |
| 1.3.6.1.4.1.2011.6.36.11.7.21 | ScalarhwOntToneEventFlag | read-write | current | whether process Tone events or not, Options: 1.disable(1) -indicates don's process Tone events 2.enable(2) -indicates process Tone events Defalut: disable(1) |
| 1.3.6.1.4.1.2011.6.36.11.7.22 | ScalarhwOntDtmfEventFlag | read-write | current | whether process Dtmf events or not, Options: 1.disable(1) -indicates don's process Dtmf events 2.enable(2) -indicates process Dtmf events Defalut: disable(1) |
| 1.3.6.1.4.1.2011.6.36.11.7.23 | ScalarhwOntCasEventFlag | read-write | current | whether process cas events or not, Options: 1.disable(1) -indicates don's process cas events 2.enable(2) -indicates process cas events Defalut: disable(1) |
| 1.3.6.1.4.1.2011.6.36.11.8 | TablehwOntPstnCTPConfigTable | not-accessible | current | Pstn CTP Config Table. The indexes of this table are hwVoiceIfIndex, hwVoiceOntIndex, hwVoiceOntPortIndex. |
| 1.3.6.1.4.1.2011.6.36.11.8.1 | RowhwOntPstnCTPConfigEntry | not-accessible | current | Pstn CTP Config Table. The indexes of this entry are hwVoiceIfIndex, hwVoiceOntIndex, hwVoiceOntPortIndex. |
| 1.3.6.1.4.1.2011.6.36.11.8.1.1 | ColumnhwOntPstnCTPTelNo | read-write | current | POTS user's telephone number of ONT |
| 1.3.6.1.4.1.2011.6.36.11.8.1.2 | ColumnhwOntPstnCTPNewServiceRight | read-write | current | POTS user's service right of ONT. It is valid for GPON ONT and invalid for EPON ONT. Options: 0.callWaiting(0), 1.threeParty(1), 2.callTransfer(2), 3.callHold(… |
| 1.3.6.1.4.1.2011.6.36.11.8.1.3 | ColumnhwOntPstnCTPHotlineUri | read-write | current | user's hot line number(URI). It is valid for GPON ONT and invalid for EPON ONT. |
| 1.3.6.1.4.1.2011.6.36.11.8.1.4 | ColumnhwOntPstnCTPUsername | read-write | current | user's name. |
| 1.3.6.1.4.1.2011.6.36.11.8.1.5 | ColumnhwOntPstnCTPPassword | read-write | current | user's password. |
| 1.3.6.1.4.1.2011.6.36.11.8.1.6 | ColumnhwOntPotsCTPTemplateIndex | read-write | current | POTS profile index which is bound to POTS user. It is valid for GPON ONT and invalid for EPON ONT. |
| 1.3.6.1.4.1.2011.6.36.11.8.1.7 | ColumnhwOntPotsCTPTemplateName | read-write | current | POTS profile name which is bound to POTS user. It is valid for GPON ONT and invalid for EPON ONT. |
| 1.3.6.1.4.1.2011.6.36.11.8.1.8 | ColumnhwOntPstnCTPDigitmapTemplateIndex | read-write | current | DigitalMap profile index which is bound to POTS user. If only set digitmap profile(only setting hwOntPstnCTPDigitmapTemplateIndex and hwOntPstnCTPDigitmapTempl… |
| 1.3.6.1.4.1.2011.6.36.11.8.1.9 | ColumnhwOntPstnCTPDigitmapTemplateName | read-write | current | DigitalMap profile name which is bound to POTS user. If only set digitmap profile(only setting hwOntPstnCTPDigitmapTemplateIndex and hwOntPstnCTPDigitmapTempla… |
| 1.3.6.1.4.1.2011.6.36.11.8.1.10 | ColumnhwOntPstnCTPSipAgentTemplateIndex | read-write | current | SipAgent profile index which is bound to POTS user. |
| 1.3.6.1.4.1.2011.6.36.11.8.1.11 | ColumnhwOntPstnCTPSipAgentTemplateName | read-write | current | SipAgent profile name which is bound to POTS user. |
| 1.3.6.1.4.1.2011.6.36.11.8.1.12 | ColumnhwOntPstnCTPIPIndex | read-write | current | IP address index which is bound to POTS user. |
| 1.3.6.1.4.1.2011.6.36.11.8.1.13 | ColumnhwOntPotsAdministrativeState | read-write | current | Pots' administrative state. Options: 1.unlock(1) -indicates the pots is unlocked 2.lock(2) -indicates the pots is locked Default: unlock(1) |
| 1.3.6.1.4.1.2011.6.36.11.8.1.14 | ColumnhwOntPotsCTPRowStatus | read-create | current | row status. Options: 1.active(1) -indicates active 2.notInService(2) -indicates not in service 3.notReady(3) -indicates not ready 4.createAndGo(4) -indicates c… |
| 1.3.6.1.4.1.2011.6.36.11.9 | TablehwSIPAgentPerformanceMonitorTable | not-accessible | current | SIPAgent Performance Monitor Table. The indexes of this table are hwVoiceIfIndex, hwVoiceOntIndex, hwVoiceOntPortIndex. |
| 1.3.6.1.4.1.2011.6.36.11.9.1 | RowhwSIPAgentPerformanceMonitorEntry | not-accessible | current | SIPAgent Performance Monitor Table. The indexes of this entry are hwVoiceIfIndex, hwVoiceOntIndex, hwVoiceOntPortIndex. |
| 1.3.6.1.4.1.2011.6.36.11.9.1.1 | ColumnhwSIPAgentTransactions | read-only | current | This attribute counts the number of new transactions that were initiated. |
| 1.3.6.1.4.1.2011.6.36.11.9.1.2 | ColumnhwSIPAgentRxInviteReqs | read-only | current | This attribute counts received invite messages, including retransmissions. |
| 1.3.6.1.4.1.2011.6.36.11.9.1.3 | ColumnhwSIPAgentRxInviteRetrans | read-only | current | This attribute counts received invite retransmission messages. |
| 1.3.6.1.4.1.2011.6.36.11.9.1.4 | ColumnhwSIPAgentRxNoninviteReqs | read-only | current | This attribute counts received non-invite messages, including retransmissions. |
| 1.3.6.1.4.1.2011.6.36.11.9.1.5 | ColumnhwSIPAgentRxNoninviteRetrans | read-only | current | This attribute counts received non-invite retransmission messages. |
| 1.3.6.1.4.1.2011.6.36.11.9.1.6 | ColumnhwSIPAgentRxResponse | read-only | current | This attribute counts total responses received. |
| 1.3.6.1.4.1.2011.6.36.11.9.1.7 | ColumnhwSIPAgentRxResponseRetransmissions | read-only | current | This attribute counts total response retransmissions received. |
| 1.3.6.1.4.1.2011.6.36.11.9.1.8 | ColumnhwSIPAgentTxInviteReqs | read-only | current | This attribute counts transmitted invite messages, including retransmissions. |
| 1.3.6.1.4.1.2011.6.36.11.9.1.9 | ColumnhwSIPAgentTxInviteRetrans | read-only | current | This attribute counts transmitted invite retransmission messages. |
| 1.3.6.1.4.1.2011.6.36.11.9.1.10 | ColumnhwSIPAgentTxNoninviteReqs | read-only | current | This attribute counts transmitted non-invite messages, including retransmissions. |
| 1.3.6.1.4.1.2011.6.36.11.9.1.11 | ColumnhwSIPAgentTxNoninviteRetrans | read-only | current | This attribute counts transmitted non-invite retransmission messages. |
| 1.3.6.1.4.1.2011.6.36.11.9.1.12 | ColumnhwSIPAgentTxResponse | read-only | current | This attribute counts the total responses sent. |
| 1.3.6.1.4.1.2011.6.36.11.9.1.13 | ColumnhwSIPAgentTxResponseRetransmissions | read-only | current | This attribute counts total response retransmissions sent. |
| 1.3.6.1.4.1.2011.6.36.11.10 | TablehwSIPCallPerformanceMonitorTable | not-accessible | current | SIP Call Performance Monitor Table. The indexes of this table are hwVoiceIfIndex, hwVoiceOntIndex, hwVoiceOntPortIndex. |
| 1.3.6.1.4.1.2011.6.36.11.10.1 | RowhwSIPCallPerformanceMonitorEntry | not-accessible | current | SIP Call Performance Monitor Table. The indexes of this entry are hwVoiceIfIndex, hwVoiceOntIndex, hwVoiceOntPortIndex. |
| 1.3.6.1.4.1.2011.6.36.11.10.1.1 | ColumnhwSIPCallFailedToConnectCounter | read-only | current | This attribute counts the number of times the SIP UA failed to reach/connect its TCP/UDP peer during SIP call initiations. |
| 1.3.6.1.4.1.2011.6.36.11.10.1.2 | ColumnhwSIPCallFailedToValidateCounter | read-only | current | This attribute counts the number of times the SIP UA failed to validate its peer during SIP call initiations. |
| 1.3.6.1.4.1.2011.6.36.11.10.1.3 | ColumnhwSIPCallTimeoutCounter | read-only | current | This attribute counts the number of times the SIP UA timed out during SIP call initiations. |
| 1.3.6.1.4.1.2011.6.36.11.10.1.4 | ColumnhwSIPCallFailedReceivedCounter | read-only | current | This attribute counts the number of times the SIP UA received a failure error code during SIP call initiations. |
| 1.3.6.1.4.1.2011.6.36.11.10.1.5 | ColumnhwSIPCallFailedToAuthenticateCounter | read-only | current | This attribute counts the number of times the SIP UA failed to authenticate itself during SIP call initiations. |
| 1.3.6.1.4.1.2011.6.36.11.11 | TablehwOntPstnCallerEmulateOprTable | not-accessible | current | ont caller emulate test table. The indexes of this table are hwVoiceIfIndex, hwVoiceOntIndex, hwVoiceOntPortIndex. |
| 1.3.6.1.4.1.2011.6.36.11.11.1 | RowhwOntPstnCallerEmulateOprEntry | not-accessible | current | ont caller emulate test table. The indexes of this entry are hwVoiceIfIndex, hwVoiceOntIndex, hwVoiceOntPortIndex. |
| 1.3.6.1.4.1.2011.6.36.11.11.1.1 | ColumnhwOntPstnCallerEmulateOprType | read-write | current | Operation type Options: 1.stop(1) -indicates that stop test; 2.start(2) -indicates that start test |
| 1.3.6.1.4.1.2011.6.36.11.11.1.2 | ColumnhwOntPstnCallerEmulateCalledTelNo | read-write | current | Called telephone number |
| 1.3.6.1.4.1.2011.6.36.11.11.1.3 | ColumnhwOntPstnCallerEmulateTestStatus | read-only | current | Test Status. Options: 1. startSuccessfully(1) -indicates start test successfully 2. stopSuccessfully(2) -indicates stop test successfully 3. sendDTMFSuccessful… |
| 1.3.6.1.4.1.2011.6.36.11.11.1.4 | ColumnhwOntPstnCallerEmulateTestResult | read-only | current | Test Result. Options: 1. callerNoDialogTone(1) -indicates that the caller has no dialog tone 2. callerOffHookingBusy(2) -indicates that the caller is offhookin… |
| 1.3.6.1.4.1.2011.6.36.11.11.1.5 | ColumnhwOntPstnCallerEmulateTestHoldTime | read-write | current | Caller Emulate test hold time, the test will auto ended when this time out. |
| 1.3.6.1.4.1.2011.6.36.11.11.1.6 | ColumnhwOntPstnCallerEmulateReportTelNo | read-only | current | The actual called number string checked and send to MGC or IMS. |
| 1.3.6.1.4.1.2011.6.36.11.11.1.7 | ColumnhwOntPstnCallerEmulateErrorCode | read-only | current | Error code |
| 1.3.6.1.4.1.2011.6.36.11.11.1.8 | ColumnhwOntPstnCallerEmulateTestRequestID | read-only | current | Request ID |
| 1.3.6.1.4.1.2011.6.36.11.12 | TablehwOntPstnCalledEmulateOprTable | not-accessible | current | ont called emulate test table. The indexes of this table are hwVoiceIfIndex, hwVoiceOntIndex, hwVoiceOntPortIndex |
| 1.3.6.1.4.1.2011.6.36.11.12.1 | RowhwOntPstnCalledEmulateOprEntry | not-accessible | current | ont called emulate test table. The indexes of this entry are hwVoiceIfIndex, hwVoiceOntIndex, hwVoiceOntPortIndex |
| 1.3.6.1.4.1.2011.6.36.11.12.1.1 | ColumnhwOntPstnCalledEmulateOprType | read-write | current | Operation type . Options: 1. stop(1) -Stop test 2. start(2) -Start test |
| 1.3.6.1.4.1.2011.6.36.11.12.1.2 | ColumnhwOntPstnCalledEmulateTestStatus | read-only | current | Test Status. Options: 1. startSuccessfully(1) -indicates start test successfully 2. stopSuccessfully(2) -indicates stop test successfully 3. sendDTMFSuccessful… |
| 1.3.6.1.4.1.2011.6.36.11.12.1.3 | ColumnhwOntPstnCalledEmulateTestResult | read-only | current | Test Result. Options: 1. calledNoRing(1) -indicates that the called does not ring 2. calledNoOffHook(2) -indicates that the called does not off hook 3. calledO… |
| 1.3.6.1.4.1.2011.6.36.11.12.1.4 | ColumnhwOntPstnCalledEmulateTestHoldTime | read-write | current | Called Emulate test hold time, the test will auto ended when this time out. |
| 1.3.6.1.4.1.2011.6.36.11.12.1.5 | ColumnhwOntPstnCalledEmulateTestRequestID | read-only | current | Request ID |
| 1.3.6.1.4.1.2011.6.36.11.13 | TablehwOntVsqmWorstHistoryStatisticTable | not-accessible | current | ont port qos query table. The indexes of this table are hwVoiceIfIndex, hwVoiceOntIndex, hwVoiceOntPortIndex, hwOntVsqmStatisticIndex |
| 1.3.6.1.4.1.2011.6.36.11.13.1 | RowhwOntVsqmWorstHistoryStatisticEntry | not-accessible | current | ont port qos query table. The indexes of this entry are hwVoiceIfIndex, hwVoiceOntIndex, hwVoiceOntPortIndex, hwOntVsqmStatisticIndex |
| 1.3.6.1.4.1.2011.6.36.11.13.1.1 | ColumnhwOntVsqmStatisticIndex | not-accessible | current | Indicates the index |
| 1.3.6.1.4.1.2011.6.36.11.13.1.2 | ColumnhwOntVsqmStatisticDateTime | read-only | current | Indicates the Statistic Date Time. |
| 1.3.6.1.4.1.2011.6.36.11.13.1.3 | ColumnhwOntVsqmTotalReceivePacketNum | read-only | current | Indicates the total receive packet number. |
| 1.3.6.1.4.1.2011.6.36.11.13.1.4 | ColumnhwOntVsqmTotalSendPacketNum | read-only | current | Indicates the total send packet number. |
| 1.3.6.1.4.1.2011.6.36.11.13.1.5 | ColumnhwOntVsqmMeanLoopDelay | read-only | current | Indicates the mean Loop Delay. Unit: millisecond |
| 1.3.6.1.4.1.2011.6.36.11.13.1.6 | ColumnhwOntVsqmMeanJitter | read-only | current | Indicates the Mean Network Jitter. Unit: millisecond |
| 1.3.6.1.4.1.2011.6.36.11.13.1.7 | ColumnhwOntVsqmPacketLossRate | read-only | current | Indicates the Packet Loss Rate in the interval. Unit: 1/100 |
| 1.3.6.1.4.1.2011.6.36.11.14 | TablehwOntPotsStatusTable | not-accessible | current | The table is used to display ptp and the ctp status of the ont The indexes of this table are hwVoiceIfIndex, hwVoiceOntIndex,hwVoiceOntPortIndex |
| 1.3.6.1.4.1.2011.6.36.11.14.1 | RowhwOntPotsStatusEntry | not-accessible | current | The table is used to display ptp and the ctp status of the ont The indexes of this entry are hwVoiceIfIndex, hwVoiceOntIndex,hwVoiceOntPortIndex |
| 1.3.6.1.4.1.2011.6.36.11.14.1.1 | ColumnhwOntPotsPtpAdmState | read-only | current | This attribute reports the current administrative state of a VoIP POTS port.Code points are assigned as follows: 0: unlock 1: lock The others means invaild. |
| 1.3.6.1.4.1.2011.6.36.11.14.1.2 | ColumnhwOntPotsCtpSrvType | read-only | current | This attribute reports the current state of a VoIP POTS port session.Code points are assigned as follows: 0: idle/none 1: 2way 2: 3way 3: fax 4: telem 5: confe… |
| 1.3.6.1.4.1.2011.6.36.11.14.1.3 | ColumnhwOntPotsHookState | read-only | current | This attribute indicates the current state of the subscriber line.Code points are assigned as follows: 0: onhook, 1: offhook The others means invaild. |
| 1.3.6.1.4.1.2011.6.36.11.14.1.4 | ColumnhwOntPotsCallState | read-only | current | This attribute reports the POTS call status.Code points are assigned as follows: 0: Registering 1: Idle,on-hook 2: Off-hook 3: Dialing 4: Ringing 5: RingBack 6… |
| 1.3.6.1.4.1.2011.6.36.11.14.1.5 | ColumnhwOntPotsCtpSrvState | read-only | current | This attribute reports the POTS service status. Code points are assigned as follows: 0: endLocal(out of service by local) 1: endRemote(out of service by remote… |
| 1.3.6.1.4.1.2011.6.36.11.14.1.6 | ColumnhwOntPotsCodec | read-only | current | Reports the current codec used for a VoIP POTS port.Code points are assigned as follows: 0: G.711A 1: G.729 2: G.711U 3: G.723 4: G.726 5: T.38 6: G.722 7: res… |
| 1.3.6.1.4.1.2011.6.36.11.15 | TablehwOntMgVagTable | not-accessible | current | Ont H248 and MGCP interface table. The indexes of this table are hwOntMgVagIfIndex,hwOntMgVagOntIndex,hwOntMgVagMgId |
| 1.3.6.1.4.1.2011.6.36.11.15.1 | RowhwOntMgVagEntry | not-accessible | current | Ont H248 and MGCP interface table. The indexes of this entry are hwOntMgVagIfIndex,hwOntMgVagOntIndex,hwOntMgVagMgId |
| 1.3.6.1.4.1.2011.6.36.11.15.1.1 | ColumnhwOntMgVagIfIndex | not-accessible | current | The ifindex of xPON port. |
| 1.3.6.1.4.1.2011.6.36.11.15.1.2 | ColumnhwOntMgVagOntIndex | not-accessible | current | The ONT index. |
| 1.3.6.1.4.1.2011.6.36.11.15.1.3 | ColumnhwOntMgVagMgId | not-accessible | current | The MG ID. |
| 1.3.6.1.4.1.2011.6.36.11.15.1.4 | ColumnhwOntMgVagIpIndex | read-write | current | The IP index. |
| 1.3.6.1.4.1.2011.6.36.11.15.1.5 | ColumnhwOntMgVagPrimaryMgc | read-write | current | Primary mgc. |
| 1.3.6.1.4.1.2011.6.36.11.15.1.6 | ColumnhwOntMgVagPrimaryMgcPort | read-write | current | The port of primary mgc. |
| 1.3.6.1.4.1.2011.6.36.11.15.1.7 | ColumnhwOntMgVagSecondaryMgc | read-write | current | Secondary mgc. |
| 1.3.6.1.4.1.2011.6.36.11.15.1.8 | ColumnhwOntMgVagSecondaryMgcPort | read-write | current | The port of secondary mgc. |
| 1.3.6.1.4.1.2011.6.36.11.15.1.9 | ColumnhwOntMgVagMinPort | read-write | current | The min udp port of media rtp. It is valid for GPON ONT and invalid for EPON ONT. |
| 1.3.6.1.4.1.2011.6.36.11.15.1.10 | ColumnhwOntMgVagMaxPort | read-write | current | The max udp port of media rtp. It is valid for GPON ONT and invalid for EPON ONT. |
| 1.3.6.1.4.1.2011.6.36.11.15.1.11 | ColumnhwOntMgVagMediaDscp | read-write | current | The DSCP of media RTP. It is valid for GPON ONT and invalid for EPON ONT. |
| 1.3.6.1.4.1.2011.6.36.11.15.1.12 | ColumnhwOntMgVagSignalPort | read-write | current | The udp port of signal. It is valid for GPON ONT and invalid for EPON ONT. |
| 1.3.6.1.4.1.2011.6.36.11.15.1.13 | ColumnhwOntMgVagSignalDscp | read-write | current | The DSCP of signal. It is valid for GPON ONT and invalid for EPON ONT. |
| 1.3.6.1.4.1.2011.6.36.11.15.1.14 | ColumnhwOntMgVagMidType | read-write | current | The MID type of the MG message, just used by H248. Options: 1.ip4Address(1) -indicates the MID type is ip4Address 2.domainName(2) -indicates the MID type is do… |
| 1.3.6.1.4.1.2011.6.36.11.15.1.15 | ColumnhwOntMgVagMid | read-write | current | The name of the MG device. |
| 1.3.6.1.4.1.2011.6.36.11.15.1.16 | ColumnhwOntMgVagMessageFormat | read-write | current | The message format of MG interface, just used by H248. It is valid for GPON ONT and invalid for EPON ONT. Options: 1.textLong(1) -indicates the message format … |
| 1.3.6.1.4.1.2011.6.36.11.15.1.17 | ColumnhwOntMgVagVersion | read-write | current | The H.248 version of MG interface, just used by H248. It is valid for GPON ONT and invalid for EPON ONT. Options: 1.ontDefault(1) -indicates the H.248 version … |
| 1.3.6.1.4.1.2011.6.36.11.15.1.18 | ColumnhwOntMgVagTidBase | read-write | current | The base string for the H.248 physical tid. |
| 1.3.6.1.4.1.2011.6.36.11.15.1.19 | ColumnhwOntMgVagHeartbeatMode | read-write | current | The heartbeat mode. Options: 1.disable(1) -indicates the heartbeat mode is disable 2.notifyMethod(2) -indicates the heartbeat mode is notify-method |
| 1.3.6.1.4.1.2011.6.36.11.15.1.20 | ColumnhwOntMgVagHeartbeatCycle | read-write | current | The heartbeat cycle. |
| 1.3.6.1.4.1.2011.6.36.11.15.1.21 | ColumnhwOntMgVagHeartbeatCount | read-write | current | The heartbeat count. |
| 1.3.6.1.4.1.2011.6.36.11.15.1.22 | ColumnhwOntMgVagTidNumber | read-write | current | The rtp tid number. |
| 1.3.6.1.4.1.2011.6.36.11.15.1.23 | ColumnhwOntMgVagTidPrefix | read-write | current | The rtp tid prefix. |
| 1.3.6.1.4.1.2011.6.36.11.15.1.24 | ColumnhwOntMgVagTidMode | read-write | current | The rtp tid mode. Options: 1.aligned(1) -indicates the rtp tid mode is aligned 2.notAligned(2) -indicates the rtp tid mode is not-aligned |
| 1.3.6.1.4.1.2011.6.36.11.15.1.25 | ColumnhwOntMgVagTidDigitBegin | read-write | current | The beginning number of the rtp tid digit. |
| 1.3.6.1.4.1.2011.6.36.11.15.1.26 | ColumnhwOntMgVagTidDigitLength | read-write | current | The length of the rtp tid digit. |
| 1.3.6.1.4.1.2011.6.36.11.15.1.27 | ColumnhwOntMgVagRowStatus | read-create | current | Options: 1.active(1) -indicates active 2.notInService(2) -indicates not in service 3.notReady(3) -indicates not ready 4.createAndGo(4) -indicates create and go… |
| 1.3.6.1.4.1.2011.6.36.11.15.1.28 | ColumnhwOntMgProtocolType | read-write | current | The mg protocol type. Options: 1.h248(1) -indicates the mg protocol is H248 2.mgcp(2) -indicates the mg protocol is MGCP Default: H248(1) |
| 1.3.6.1.4.1.2011.6.36.11.16 | TablehwOntMgAttrConfigTable | not-accessible | current | Ont MG public attribute table. The index of this table is hwOntMgAttrIfIndex,hwOntMgAttrOntIndex,hwOntMgAttrMgId |
| 1.3.6.1.4.1.2011.6.36.11.16.1 | RowhwOntMgAttrConfigEntry | not-accessible | current | Ont MG public attribute table. The index of this entry is hwOntMgAttrIfIndex,hwOntMgAttrOntIndex,hwOntMgAttrMgId |
| 1.3.6.1.4.1.2011.6.36.11.16.1.1 | ColumnhwOntMgAttrIfIndex | not-accessible | current | The ifindex of xPON port. |
| 1.3.6.1.4.1.2011.6.36.11.16.1.2 | ColumnhwOntMgAttrOntIndex | not-accessible | current | The ONT index. |
| 1.3.6.1.4.1.2011.6.36.11.16.1.3 | ColumnhwOntMgAttrMgId | not-accessible | current | The MG ID. |
| 1.3.6.1.4.1.2011.6.36.11.16.1.4 | ColumnhwOntMgAttrFaxMode | read-write | current | The fax mode. Options: 1.passthru(1) -indicates the fax mode is passthru 2.t38(2) -indicates the fax mode is t38 |
| 1.3.6.1.4.1.2011.6.36.11.16.1.5 | ColumnhwOntMgAttrNegoMode | read-write | current | The negotiate mode. Options: 1.negotiate(1) -indicates the negotiate mode is negotiate 2.selfSwitch(2) -indicates the fax mode is self-switch |
| 1.3.6.1.4.1.2011.6.36.11.16.1.6 | ColumnhwOntMgAttrOrder1stCodec | read-write | current | codec of order 1. It is valid for GPON ONT and invalid for EPON ONT. |
| 1.3.6.1.4.1.2011.6.36.11.16.1.7 | ColumnhwOntMgAttrOrder1stPacketPeriod | read-write | current | packet period of order 1. It is valid for GPON ONT and invalid for EPON ONT. Options: 1.time10ms(1) -indicates the packet period is 10ms 2.time15ms(2) -indicat… |
| 1.3.6.1.4.1.2011.6.36.11.16.1.8 | ColumnhwOntMgAttrOrder1stSilenceFlag | read-write | current | silence suppression of order 1. It is valid for GPON ONT and invalid for EPON ONT. Options: 1.off(1) -indicates the silence suppression is off 2.on(2) -indicat… |
| 1.3.6.1.4.1.2011.6.36.11.16.1.9 | ColumnhwOntMgAttrOrder2stCodec | read-write | current | codec of order 2. It is valid for GPON ONT and invalid for EPON ONT. |
| 1.3.6.1.4.1.2011.6.36.11.16.1.10 | ColumnhwOntMgAttrOrder2stPacketPeriod | read-write | current | packet period of order 2. It is valid for GPON ONT and invalid for EPON ONT. Options: 1.time10ms(1) -indicates the packet period is 10ms 2.time15ms(2) -indicat… |
| 1.3.6.1.4.1.2011.6.36.11.16.1.11 | ColumnhwOntMgAttrOrder2stSilenceFlag | read-write | current | silence suppression of order 2. It is valid for GPON ONT and invalid for EPON ONT. Options: 1.off(1) -indicates the silence suppression is off 2.on(2) -indicat… |
| 1.3.6.1.4.1.2011.6.36.11.16.1.12 | ColumnhwOntMgAttrOrder3stCodec | read-write | current | codec of order 3. It is valid for GPON ONT and invalid for EPON ONT. |
| 1.3.6.1.4.1.2011.6.36.11.16.1.13 | ColumnhwOntMgAttrOrder3stPacketPeriod | read-write | current | packet period of order 3. It is valid for GPON ONT and invalid for EPON ONT. Options: 1.time10ms(1) -indicates the packet period is 10ms 2.time15ms(2) -indicat… |
| 1.3.6.1.4.1.2011.6.36.11.16.1.14 | ColumnhwOntMgAttrOrder3stSilenceFlag | read-write | current | silence suppression of order 3. It is valid for GPON ONT and invalid for EPON ONT. Options: 1.off(1) -indicates the silence suppression is off 2.on(2) -indicat… |
| 1.3.6.1.4.1.2011.6.36.11.16.1.15 | ColumnhwOntMgAttrOrder4stCodec | read-write | current | codec of order 4. It is valid for GPON ONT and invalid for EPON ONT. |
| 1.3.6.1.4.1.2011.6.36.11.16.1.16 | ColumnhwOntMgAttrOrder4stPacketPeriod | read-write | current | packet period of order 3. It is valid for GPON ONT and invalid for EPON ONT. Options: 1.time10ms(1) -indicates the packet period is 10ms 2.time15ms(2) -indicat… |
| 1.3.6.1.4.1.2011.6.36.11.16.1.17 | ColumnhwOntMgAttrOrder4stSilenceFlag | read-write | current | silence suppression of order 4. It is valid for GPON ONT and invalid for EPON ONT. Options: 1.off(1) -indicates the silence suppression is off 2.on(2) -indicat… |
| 1.3.6.1.4.1.2011.6.36.11.16.1.18 | ColumnhwOntMgAttrOobDtmfFlag | read-write | current | Oob Dtmf Flag. It is valid for GPON ONT and invalid for EPON ONT. Options: 1.disable(1) -indicates the Oob DTMF is disable 2.enable(2) -indicates the Oob DTMF … |
| 1.3.6.1.4.1.2011.6.36.11.16.1.19 | ColumnhwOntMgAttrAnnouncementType | read-write | current | Announcement after off hook time out. It is valid for GPON ONT and invalid for EPON ONT. Options: 1.silence(1) -indicates play the voice of silence after off h… |
| 1.3.6.1.4.1.2011.6.36.11.16.1.20 | ColumnhwOntMgAttrJitterBuffTarget | read-write | current | The target value of fixed jitter buffer. It is valid for GPON ONT and invalid for EPON ONT. |
| 1.3.6.1.4.1.2011.6.36.11.16.1.21 | ColumnhwOntMgAttrJitterBuffMax | read-write | current | The max value of jitter buffer. It is valid for GPON ONT and invalid for EPON ONT. |
| 1.3.6.1.4.1.2011.6.36.11.16.1.22 | ColumnhwOntMgAttrJitterBuffMin | read-write | current | The min value of jitter buffer. It is valid for GPON ONT and invalid for EPON ONT. |
| 1.3.6.1.4.1.2011.6.36.11.16.1.23 | ColumnhwOntMgAttrJitterBuffDynTarget | read-write | current | The target value of dynamic jitter buffer. It is valid for GPON ONT and invalid for EPON ONT. |
| 1.3.6.1.4.1.2011.6.36.11.16.1.24 | ColumnhwOntMgAttrEchoFlag | read-write | current | echo flag. It is valid for GPON ONT and invalid for EPON ONT. Options: 1.off(1) -indicates the echo flag is off 2.on(2) -indicates the echo flag is on |
| 1.3.6.1.4.1.2011.6.36.11.16.1.25 | ColumnhwOntMgAttrPstnProtocolVariant | read-write | current | country code, means geography location. It is valid for GPON ONT and invalid for EPON ONT. Options: Indicate the E.164 country code |
| 1.3.6.1.4.1.2011.6.36.11.16.1.26 | ColumnhwOntMgAttrPiggybackEventFlag | read-write | current | whether process piggyback events or not. It is valid for GPON ONT and invalid for EPON ONT. Options: 1.disable(1) -indicates don't process piggyback events 2.e… |
| 1.3.6.1.4.1.2011.6.36.11.16.1.27 | ColumnhwOntMgAttrToneEventFlag | read-write | current | whether process Tone events or not. It is valid for GPON ONT and invalid for EPON ONT. Options: 1.disable(1) -indicates don't process Tone events 2.enable(2) -… |
| 1.3.6.1.4.1.2011.6.36.11.16.1.28 | ColumnhwOntMgAttrDtmfEventFlag | read-write | current | whether process Dtmf events or not. It is valid for GPON ONT and invalid for EPON ONT. Options: 1.disable(1) -indicates don't process Dtmf events 2.enable(2) -… |
| 1.3.6.1.4.1.2011.6.36.11.16.1.29 | ColumnhwOntMgAttrCasEventFlag | read-write | current | whether process cas events or not. It is valid for GPON ONT and invalid for EPON ONT. Options: 1.disable(1) -indicates don't process cas events 2.enable(2) -in… |
| 1.3.6.1.4.1.2011.6.36.11.16.1.30 | ColumnhwOntMgAttrFlashUpper | read-write | current | The flash upper limit. It is valid for GPON ONT and invalid for EPON ONT. If the value is 0, it indicates ONT own default value. |
| 1.3.6.1.4.1.2011.6.36.11.16.1.31 | ColumnhwOntMgAttrFlashLower | read-write | current | The flash lower limit. It is valid for GPON ONT and invalid for EPON ONT. If the value is 0, it indicates ONT own default value. |
| 1.3.6.1.4.1.2011.6.36.11.16.1.32 | ColumnhwOntMgAttrSilence | read-write | current | The silence switch. It is valid for GPON ONT and invalid for EPON ONT. Options: 1.disable(1) -indicates the silence switch is disable 2.enable(2) -indicates th… |
| 1.3.6.1.4.1.2011.6.36.11.17 | TablehwOntSipVagTable | not-accessible | current | SIP VAG Table. The indexes of this table are hwOntSipVagIfIndex, hwOntSipVagOntIndex, hwOntSipVagMgId. |
| 1.3.6.1.4.1.2011.6.36.11.17.1 | RowhwOntSipVagEntry | not-accessible | current | SIP VAG Table. The indexes of this entry are hwOntSipVagIfIndex, hwOntSipVagOntIndex, hwOntSipVagMgId. |
| 1.3.6.1.4.1.2011.6.36.11.17.1.1 | ColumnhwOntSipVagIfIndex | not-accessible | current | The ifindex. |
| 1.3.6.1.4.1.2011.6.36.11.17.1.2 | ColumnhwOntSipVagOntIndex | not-accessible | current | The ONT ID. |
| 1.3.6.1.4.1.2011.6.36.11.17.1.3 | ColumnhwOntSipVagMgId | not-accessible | current | The MG ID. |
| 1.3.6.1.4.1.2011.6.36.11.17.1.4 | ColumnhwOntSipVagIpIndex | read-write | current | The index of IP interface. |
| 1.3.6.1.4.1.2011.6.36.11.17.1.5 | ColumnhwOntSipVagProxyPort | read-write | current | The port of proxy server. |
| 1.3.6.1.4.1.2011.6.36.11.17.1.6 | ColumnhwOntSipVagSecondaryProxyUri | read-write | current | The URI of secondary proxy server. |
| 1.3.6.1.4.1.2011.6.36.11.17.1.7 | ColumnhwOntSipVagSecondaryProxyPort | read-write | current | The port of secondary proxy server. |
| 1.3.6.1.4.1.2011.6.36.11.17.1.8 | ColumnhwOntSipVagRegisterPort | read-write | current | The port of register server. It is invalid For EPON ONT when server type is IMS. |
| 1.3.6.1.4.1.2011.6.36.11.17.1.9 | ColumnhwOntSipVagSecondaryRegisterUri | read-write | current | The URI of secondary register server. It is invalid For EPON ONT when server type is IMS. |
| 1.3.6.1.4.1.2011.6.36.11.17.1.10 | ColumnhwOntSipVagSecondaryRegisterPort | read-write | current | The port of secondary register server. It is invalid For EPON ONT when server type is IMS. |
| 1.3.6.1.4.1.2011.6.36.11.17.1.11 | ColumnhwOntSipVagOutboundUri | read-write | current | The URI of outbound server. It is invalid For EPON ONT when server type is IMS. |
| 1.3.6.1.4.1.2011.6.36.11.17.1.12 | ColumnhwOntSipVagOutboundPort | read-write | current | The port of outbound server. It is invalid For EPON ONT when server type is IMS. |
| 1.3.6.1.4.1.2011.6.36.11.17.1.13 | ColumnhwOntSipVagHeartbeatMode | read-write | current | The heartbeat mode of ONT SIP agent. Options: 1.disable(1) -indicates disable heartbeat 2.enable(2) -indicates enable heartbeat |
| 1.3.6.1.4.1.2011.6.36.11.17.1.14 | ColumnhwOntSipVagHeartbeatCycle | read-write | current | The heartbeat cycle of ONT SIP agent. |
| 1.3.6.1.4.1.2011.6.36.11.17.1.15 | ColumnhwOntSipVagHeartbeatCount | read-write | current | The heartbeat count of ONT SIP agent. |
| 1.3.6.1.4.1.2011.6.36.11.17.1.16 | ColumnhwOntSipVagProxyUri | read-write | current | The URI of proxy server. |
| 1.3.6.1.4.1.2011.6.36.11.17.1.17 | ColumnhwOntSipVagRtpPortMin | read-write | current | The minimal port of media. It is valid for GPON ONT and invalid for EPON ONT. |
| 1.3.6.1.4.1.2011.6.36.11.17.1.18 | ColumnhwOntSipVagRtpPortMax | read-write | current | The maximal port of media. It is valid for GPON ONT and invalid for EPON ONT. |
| 1.3.6.1.4.1.2011.6.36.11.17.1.19 | ColumnhwOntSipVagRtpDscp | read-write | current | The DSCP of media. It is valid for GPON ONT and invalid for EPON ONT. |
| 1.3.6.1.4.1.2011.6.36.11.17.1.20 | ColumnhwOntSipVagSignalTransMode | read-write | current | The transfer mode of signal. It is valid for GPON ONT and invalid for EPON ONT. Options: 1.tcp(1) -indicates tcp 2.udp(2) -indicates udp |
| 1.3.6.1.4.1.2011.6.36.11.17.1.21 | ColumnhwOntSipVagSignalPortId | read-write | current | The port ID of signal. |
| 1.3.6.1.4.1.2011.6.36.11.17.1.22 | ColumnhwOntSipVagSignalDscp | read-write | current | The DSCP of signal. It is valid for GPON ONT and invalid for EPON ONT. |
| 1.3.6.1.4.1.2011.6.36.11.17.1.23 | ColumnhwOntSipVagRegisterUri | read-write | current | The URI of register server. It is invalid for EPON ONT when server type is IMS. |
| 1.3.6.1.4.1.2011.6.36.11.17.1.24 | ColumnhwOntSipVagRegExpiration | read-write | current | The expiration of registration. |
| 1.3.6.1.4.1.2011.6.36.11.17.1.25 | ColumnhwOntSipVagReRegStartTime | read-write | current | Registration rereg head start time. It is valid for GPON ONT and invalid for EPON ONT. |
| 1.3.6.1.4.1.2011.6.36.11.17.1.26 | ColumnhwOntSipVagVoicemailUri | read-write | current | The URI of voicemail. It is valid for GPON ONT and invalid for EPON ONT. |
| 1.3.6.1.4.1.2011.6.36.11.17.1.27 | ColumnhwOntSipVagVoicemailSubExpir | read-write | current | The subscrition expiration of voicemail. It is valid for GPON ONT and invalid for EPON ONT. |
| 1.3.6.1.4.1.2011.6.36.11.17.1.28 | ColumnhwOntSipVagConfFactoryUri | read-write | current | The URI of conference factory. It is valid for GPON ONT and invalid for EPON ONT. |
| 1.3.6.1.4.1.2011.6.36.11.17.1.29 | ColumnhwOntSipVagBridgedLineAgentUri | read-write | current | The URI of bridged line agent. It is valid for GPON ONT and invalid for EPON ONT. |
| 1.3.6.1.4.1.2011.6.36.11.17.1.30 | ColumnhwOntSipVagUserAuthRealm | read-write | current | The auth realm. It is valid for GPON ONT and invalid for EPON ONT. |
| 1.3.6.1.4.1.2011.6.36.11.17.1.31 | ColumnhwOntSipVagHomeDomain | read-write | current | The home domain. It is invalid for EPON ONT when server type is not IMS. |
| 1.3.6.1.4.1.2011.6.36.11.17.1.32 | ColumnhwOntSipVagRowStatus | read-create | current | Options: 1.active(1) -indicates active 2.notInService(2) -indicates not in service 3.notReady(3) -indicates not ready 4.createAndGo(4) -indicates create and go… |
| 1.3.6.1.4.1.2011.6.36.11.17.1.33 | ColumnhwOntSipVagServerType | read-write | current | The server type. It is valid for EPON ONT and invalid for GPON ONT. Options: 1.general(1) -indicates general SIP server 2.ims(2) -indicates IMS Default:general… |
| 1.3.6.1.4.1.2011.6.36.11.18 | TablehwOntPotsPTPConfigTable | not-accessible | current | POTS PTP Electrical Attribute Table. The indexes of this table are hwVoiceIfIndex, hwVoiceOntIndex, hwVoiceOntPortIndex. |
| 1.3.6.1.4.1.2011.6.36.11.18.1 | RowhwOntPotsPTPConfigEntry | not-accessible | current | POTS PTP Electrical Attribute Table. The indexes of this entry are hwVoiceIfIndex, hwVoiceOntIndex, hwVoiceOntPortIndex. |
| 1.3.6.1.4.1.2011.6.36.11.18.1.1 | ColumnhwOntPotsPTPSendGain | read-write | current | Send Gain. 1 : -12.0db 2 : -11.5db 3 : -11.0db 4 : -10.5db 5 : -10.0db 6 : -9.5db 7 : -9.0db 8 : -8.5db 9 : -8.0db 10 : -7.5db 11 : -7.0db 12 : -6.5db 13 : -6.… |
| 1.3.6.1.4.1.2011.6.36.11.18.1.2 | ColumnhwOntPotsPTPRecvGain | read-write | current | Recv Gain. 1 : -12.0db 2 : -11.5db 3 : -11.0db 4 : -10.5db 5 : -10.0db 6 : -9.5db 7 : -9.0db 8 : -8.5db 9 : -8.0db 10 : -7.5db 11 : -7.0db 12 : -6.5db 13 : -6.… |
| 1.3.6.1.4.1.2011.6.36.11.18.1.3 | ColumnhwOntPotsPTPImpedance | read-write | current | Impedance. 1: r-600 Ohms(1) 2: r-900 Ohms(2) 3: c1:150 nF-R1:750 Ohm-R2:270 Ohm(3) 4: c1:115 nF-R1:820 Ohm-R2:220 Ohm(4) 5: c1:230 nF-R1:1500 Ohm-R2:320 Ohm(5)… |
| 1.3.6.1.4.1.2011.6.36.11.18.1.4 | ColumnhwOntPotsPTPSignaling | read-write | current | Pots side signaling. 1: loopStart(1) 2: groundStart(2) 3: loopReverseBattery(3) 4: coinFirst(4) 5: dialToneFirst(5) 6: multiParty(6) |
| 1.3.6.1.4.1.2011.6.36.11.19 | TablehwOntMgCTPConfigTable | not-accessible | current | Ont H248 and MGCP PSTN CTP table. The indexes of this table are hwVoiceIfIndex,hwVoiceOntIndex,hwVoiceOntPortIndex |
| 1.3.6.1.4.1.2011.6.36.11.19.1 | RowhwOntMgCTPConfigEntry | not-accessible | current | Ont H248 and MGCP PSTN CTP table. The indexes of this entry are hwVoiceIfIndex,hwVoiceOntIndex,hwVoiceOntPortIndex |
| 1.3.6.1.4.1.2011.6.36.11.19.1.1 | ColumnhwOntMgPstnCTPMgId | read-write | current | The H.248 MG ID. |
| 1.3.6.1.4.1.2011.6.36.11.19.1.2 | ColumnhwOntMgPstnCTPTerminalId | read-write | current | The terminal ID. |
| 1.3.6.1.4.1.2011.6.36.11.19.1.3 | ColumnhwOntMgPstnCTPCodecSelect | read-write | current | Selecting codec configuration from MG or user. It is valid for GPON ONT and invalid for EPON ONT. Options: 1.baseOnUser(1) -indicates the codec is base-on-user… |
| 1.3.6.1.4.1.2011.6.36.11.19.1.4 | ColumnhwOntMgPstnCTPOrder1stCodec | read-write | current | codec of order 1. It is valid for GPON ONT and invalid for EPON ONT. defalut: 8 |
| 1.3.6.1.4.1.2011.6.36.11.19.1.5 | ColumnhwOntMgPstnCTPOrder1stPacketPeriod | read-write | current | packet period of order 1. It is valid for GPON ONT and invalid for EPON ONT. Options: 1.time10ms(1) -indicates the packet period is 10ms 2.time15ms(2) -indicat… |
| 1.3.6.1.4.1.2011.6.36.11.19.1.6 | ColumnhwOntMgPstnCTPOrder1stSilenceFlag | read-write | current | silence suppression of order 1. It is valid for GPON ONT and invalid for EPON ONT. Options: 1.off(1) -indicates the silence suppression is off 2.on(2) -indicat… |
| 1.3.6.1.4.1.2011.6.36.11.19.1.7 | ColumnhwOntMgPstnCTPOrder2stCodec | read-write | current | codec of order 2. It is valid for GPON ONT and invalid for EPON ONT. defalut: 0 |
| 1.3.6.1.4.1.2011.6.36.11.19.1.8 | ColumnhwOntMgPstnCTPOrder2stPacketPeriod | read-write | current | packet period of order 2. It is valid for GPON ONT and invalid for EPON ONT. Options: 1.time10ms(1) -indicates the packet period is 10ms 2.time15ms(2) -indicat… |
| 1.3.6.1.4.1.2011.6.36.11.19.1.9 | ColumnhwOntMgPstnCTPOrder2stSilenceFlag | read-write | current | silence suppression of order 2. It is valid for GPON ONT and invalid for EPON ONT. Options: 1.off(1) -indicates the silence suppression is off 2.on(2) -indicat… |
| 1.3.6.1.4.1.2011.6.36.11.19.1.10 | ColumnhwOntMgPstnCTPOrder3stCodec | read-write | current | codec of order 3. It is valid for GPON ONT and invalid for EPON ONT. defalut: 18 |
| 1.3.6.1.4.1.2011.6.36.11.19.1.11 | ColumnhwOntMgPstnCTPOrder3stPacketPeriod | read-write | current | packet period of order 3. It is valid for GPON ONT and invalid for EPON ONT. Options: 1.time10ms(1) -indicates the packet period is 10ms 2.time15ms(2) -indicat… |
| 1.3.6.1.4.1.2011.6.36.11.19.1.12 | ColumnhwOntMgPstnCTPOrder3stSilenceFlag | read-write | current | silence suppression of order 3. It is valid for GPON ONT and invalid for EPON ONT. Options: 1.off(1) -indicates the silence suppression is off 2.on(2) -indicat… |
| 1.3.6.1.4.1.2011.6.36.11.19.1.13 | ColumnhwOntMgPstnCTPOrder4stCodec | read-write | current | codec of order 4. It is valid for GPON ONT and invalid for EPON ONT. defalut: 9 |
| 1.3.6.1.4.1.2011.6.36.11.19.1.14 | ColumnhwOntMgPstnCTPOrder4stPacketPeriod | read-write | current | packet period of order 4. It is valid for GPON ONT and invalid for EPON ONT. Options: 1.time10ms(1) -indicates the packet period is 10ms 2.time15ms(2) -indicat… |
| 1.3.6.1.4.1.2011.6.36.11.19.1.15 | ColumnhwOntMgPstnCTPOrder4stSilenceFlag | read-write | current | silence suppression of order 4. It is valid for GPON ONT and invalid for EPON ONT. Options: 1.off(1) -indicates the silence suppression is off 2.on(2) -indicat… |
| 1.3.6.1.4.1.2011.6.36.11.19.1.16 | ColumnhwOntMgPstnCTPRowStatus | read-create | current | Options: 1.active(1) -indicates active 2.notInService(2) -indicates not in service 3.notReady(3) -indicates not ready 4.createAndGo(4) -indicates create and go… |
| 1.3.6.1.4.1.2011.6.36.11.20 | TablehwOntSIPCTPConfigTable | not-accessible | current | SIP PSTN CTP Config Table. The indexes of this table are hwVoiceIfIndex, hwVoiceOntIndex, hwVoiceOntPortIndex. |
| 1.3.6.1.4.1.2011.6.36.11.20.1 | RowhwOntSIPCTPConfigEntry | not-accessible | current | SIP PSTN CTP Config Table. The indexes of this entry are hwVoiceIfIndex, hwVoiceOntIndex, hwVoiceOntPortIndex. |
| 1.3.6.1.4.1.2011.6.36.11.20.1.1 | ColumnhwOntSIPCTPDigitmapTemplateIndex | read-write | current | DigitalMap profile index which is bound to POTS user. If only set digitmap profile(including hwOntSIPCTPDigitmapTemplateIndex and hwOntSIPCTPDigitmapTemplateNa… |
| 1.3.6.1.4.1.2011.6.36.11.20.1.2 | ColumnhwOntSIPCTPDigitmapTemplateName | read-write | current | DigitalMap profile name which is bound to POTS user. If only set digitmap profile(including hwOntSIPCTPDigitmapTemplateIndex and hwOntSIPCTPDigitmapTemplateNam… |
| 1.3.6.1.4.1.2011.6.36.11.20.1.3 | ColumnhwOntSIPCTPMgID | read-write | current | The SIP MG ID. |
| 1.3.6.1.4.1.2011.6.36.11.20.1.4 | ColumnhwOntSIPCTPTelno | read-write | current | SIP user's telephone number of ONT. |
| 1.3.6.1.4.1.2011.6.36.11.20.1.5 | ColumnhwOntSIPCTPUsername | read-write | current | SIP user's name. |
| 1.3.6.1.4.1.2011.6.36.11.20.1.6 | ColumnhwOntSIPCTPPassword | read-write | current | SIP user's password. |
| 1.3.6.1.4.1.2011.6.36.11.20.1.7 | ColumnhwOntSIPCTPNewServiceRight | read-write | current | SIP user's service right of ONT. It is valid for GPON ONT and invalid for EPON ONT. Options: 0.callWaiting(0), 1.threeParty(1), 2.callTransfer(2), 3.callHold(3… |
| 1.3.6.1.4.1.2011.6.36.11.20.1.8 | ColumnhwOntSIPCTPHotlineUri | read-write | current | SIP user's hot line number(URI). It is valid for GPON ONT and invalid for EPON ONT. |
| 1.3.6.1.4.1.2011.6.36.11.20.1.9 | ColumnhwOntSIPPstnCTPCodecSelect | read-write | current | Ont SIP Pstn user's selected codec. It is valid for GPON ONT and invalid for EPON ONT. Options: 1.baseOnUser(1) -indicates the codec is base-on-user 2.baseOnMg… |
| 1.3.6.1.4.1.2011.6.36.11.20.1.10 | ColumnhwOntSIPPstnCTPOrder1stCodec | read-write | current | codec of order 1. It is valid for GPON ONT and invalid for EPON ONT. defalut: 8 |
| 1.3.6.1.4.1.2011.6.36.11.20.1.11 | ColumnhwOntSIPPstnCTPOrder1stPacketPeriod | read-write | current | packet period of order 1. It is valid for GPON ONT and invalid for EPON ONT. Options: 1.time10ms(1) -indicates the packet period is 10ms 2.time15ms(2) -indicat… |
| 1.3.6.1.4.1.2011.6.36.11.20.1.12 | ColumnhwOntSIPPstnCTPOrder1stSilenceFlag | read-write | current | silence suppression of order 1. It is valid for GPON ONT and invalid for EPON ONT. Options: 1.off(1) -indicates the silence suppression is off 2.on(2) -indicat… |
| 1.3.6.1.4.1.2011.6.36.11.20.1.13 | ColumnhwOntSIPPstnCTPOrder2stCodec | read-write | current | codec of order 2. It is valid for GPON ONT and invalid for EPON ONT. defalut: 0 |
| 1.3.6.1.4.1.2011.6.36.11.20.1.14 | ColumnhwOntSIPPstnCTPOrder2stPacketPeriod | read-write | current | packet period of order 2. It is valid for GPON ONT and invalid for EPON ONT. Options: 1.time10ms(1) -indicates the packet period is 10ms 2.time15ms(2) -indicat… |
| 1.3.6.1.4.1.2011.6.36.11.20.1.15 | ColumnhwOntSIPPstnCTPOrder2stSilenceFlag | read-write | current | silence suppression of order 2. It is valid for GPON ONT and invalid for EPON ONT. Options: 1.off(1) -indicates the silence suppression is off 2.on(2) -indicat… |
| 1.3.6.1.4.1.2011.6.36.11.20.1.16 | ColumnhwOntSIPPstnCTPOrder3stCodec | read-write | current | codec of order 3. It is valid for GPON ONT and invalid for EPON ONT. defalut: 18 |
| 1.3.6.1.4.1.2011.6.36.11.20.1.17 | ColumnhwOntSIPPstnCTPOrder3stPacketPeriod | read-write | current | packet period of order 3. It is valid for GPON ONT and invalid for EPON ONT. Options: 1.time10ms(1) -indicates the packet period is 10ms 2.time15ms(2) -indicat… |
| 1.3.6.1.4.1.2011.6.36.11.20.1.18 | ColumnhwOntSIPPstnCTPOrder3stSilenceFlag | read-write | current | silence suppression of order 3. It is valid for GPON ONT and invalid for EPON ONT. Options: 1.off(1) -indicates the silence suppression is off 2.on(2) -indicat… |
| 1.3.6.1.4.1.2011.6.36.11.20.1.19 | ColumnhwOntSIPPstnCTPOrder4stCodec | read-write | current | codec of order 4. It is valid for GPON ONT and invalid for EPON ONT. defalut: 9 |
| 1.3.6.1.4.1.2011.6.36.11.20.1.20 | ColumnhwOntSIPPstnCTPOrder4stPacketPeriod | read-write | current | packet period of order 4. It is valid for GPON ONT and invalid for EPON ONT. Options: 1.time10ms(1) -indicates the packet period is 10ms 2.time15ms(2) -indicat… |
| 1.3.6.1.4.1.2011.6.36.11.20.1.21 | ColumnhwOntSIPPstnCTPOrder4stSilenceFlag | read-write | current | silence suppression of order 4. It is valid for GPON ONT and invalid for EPON ONT. Options: 1.off(1) -indicates the silence suppression is off 2.on(2) -indicat… |
| 1.3.6.1.4.1.2011.6.36.11.20.1.22 | ColumnhwOntSIPCTPRowStatus | read-create | current | Options: 1.active(1) -indicates active 2.notInService(2) -indicates not in service 3.notReady(3) -indicates not ready 4.createAndGo(4) -indicates create and go… |
| 1.3.6.1.4.1.2011.6.36.11.21 | TablehwOntDigitMapBodyTable | not-accessible | current | The digitmap body table. The indexes of this table are hwOntDigitMapTemplateIndex |
| 1.3.6.1.4.1.2011.6.36.11.21.1 | RowhwOntDigitMapBodyEntry | not-accessible | current | The digitmap body table. The indexes of this entry are hwOntDigitMapTemplateIndex |
| 1.3.6.1.4.1.2011.6.36.11.21.1.1 | ColumnhwOntDigitMapBodyLength | read-write | current | The digitmap body length. |
| 1.3.6.1.4.1.2011.6.36.11.21.1.2 | ColumnhwOntDigitMapBodySliceNo | read-write | current | The digitmap body slice. The high 8bits indicates total slice number. The low 8bits indicates current slice serial number(begin with 0). |
| 1.3.6.1.4.1.2011.6.36.11.21.1.3 | ColumnhwOntDigitMapBodyString | read-write | current | The digitmap body string. |
| 1.3.6.1.4.1.2011.6.36.11.22 | TablehwOntRecentCallRecordsTable | not-accessible | current | The ONT recent call records table. The indexes of this table are hwVoiceIfIndex, hwVoiceOntIndex, hwVoiceOntPortIndex, hwOntRecentCallRecordIndex |
| 1.3.6.1.4.1.2011.6.36.11.22.1 | RowhwOntRecentCallRecordsEntry | not-accessible | current | The ONT recent call records table. The indexes of this entry are hwVoiceIfIndex, hwVoiceOntIndex, hwVoiceOntPortIndex, hwOntRecentCallRecordIndex |
| 1.3.6.1.4.1.2011.6.36.11.22.1.1 | ColumnhwOntRecentCallRecordIndex | not-accessible | current | Indicates the index of the call record. If the index is 1, it indicates the last call that has ended on the port. If this index is 2, it indicates the penultim… |
| 1.3.6.1.4.1.2011.6.36.11.22.1.2 | ColumnhwOntRecentCallStartDate | read-only | current | Indicates the start date of the call. 'AAAABBCC' indicates the date, among which, 'AAAA' indicates the year, 'BB' indicates the month, and 'CC' indicates the d… |
| 1.3.6.1.4.1.2011.6.36.11.22.1.3 | ColumnhwOntRecentCallStartTime | read-only | current | Indicates the start time of the call. 'AABBCCDD' indicates the time, among which, 'AA' indicates the hour, 'BB' indicates the minute, 'CC' indicates the second… |
| 1.3.6.1.4.1.2011.6.36.11.22.1.4 | ColumnhwOntRecentCallDuration | read-only | current | Indicates the duration of the call (unit: second). |
| 1.3.6.1.4.1.2011.6.36.11.22.1.5 | ColumnhwOntRecentCallType | read-only | current | Indicates the type of the call. Options: 1.outgoingCall(1) -indicates the call is a outgoing call 2.incomingCall(2) -indicates the call is a incoming call |
| 1.3.6.1.4.1.2011.6.36.11.22.1.6 | ColumnhwOntRecentCallCodec | read-only | current | Indicates the codec used in the call. Codec points are assigned as follows: 0: G.711U 1: Reserved 2: G.726 3: GSM 4: G.723 5: DVI4-8K 6: DVI4-16K 7: LPC 8: G.7… |
| 1.3.6.1.4.1.2011.6.36.11.22.1.7 | ColumnhwOntRecentCallerNumber | read-only | current | Indicates the calling number. |
| 1.3.6.1.4.1.2011.6.36.11.22.1.8 | ColumnhwOntRecentCalleeNumber | read-only | current | Indicates the called number. |
| 1.3.6.1.4.1.2011.6.36.11.22.1.9 | ColumnhwOntRecentCallPacketsSent | read-only | current | Indicates the number of packets sent during the call.. |
| 1.3.6.1.4.1.2011.6.36.11.22.1.10 | ColumnhwOntRecentCallPacketsReceived | read-only | current | Indicates the number of packets received during the call. |
| 1.3.6.1.4.1.2011.6.36.11.22.1.11 | ColumnhwOntRecentCallPacketsLost | read-only | current | Indicates the number of packets discarded during the call. |
| 1.3.6.1.4.1.2011.6.36.11.22.1.12 | ColumnhwOntRecentCallRoundTripDelay | read-only | current | Indicates the loop delay of the call (unit: ms). |
| 1.3.6.1.4.1.2011.6.36.11.22.1.13 | ColumnhwOntRecentCallRcvInterArrivJitter | read-only | current | Indicates the jitter of the call in the Rx direction (unit: ms). |
| 1.3.6.1.4.1.2011.6.36.11.22.1.14 | ColumnhwOntRecentCallMosLq | read-only | current | Indicates the average MOS value of the call (this value has been increased by 10 times). |
| 1.3.6.1.4.1.2011.6.36.11.23 | NodehwOntVoipAlarmCfgTable | |||
| 1.3.6.1.4.1.2011.6.36.11.23.1 | ScalarhwOntAlarmMassSipAlarmThreshold | read-write | current | Indicates the threshold for mass SIP alarm. Default: 100 |
| 1.3.6.1.4.1.2011.6.36.11.23.2 | ScalarhwOntVoipSingleAlarmSwitch | read-write | current | Indicates the switch for single ONT voip alarm. Options: 1.disable(1) -indicates the single alarm switch is off 2.enable(2) -indicates the single alarm switch … |
| 1.3.6.1.4.1.2011.6.36.11.23.3 | ScalarhwOntVoipMassAlarmSwitch | read-write | current | Indicates the switch for mass ONT voip alarm Options: 1.disable(1) -indicates the mass alarm switch is off 2.enable(2) -indicates the mass alarm switch is on D… |
| 1.3.6.1.4.1.2011.6.36.11.23.4 | ScalarhwOntVoipMassEventSwitch | read-write | current | Indicates the switch for mass ONT voip alarm event in 15 minutes Options: 1.disable(1) -indicates the mass event switch is off 2.enable(2) -indicates the mass … |
| 1.3.6.1.4.1.2011.6.36.11.23.5 | ScalarhwOntVoipMassEventContent | read-write | current | Indicates the content for mass ONT voip alarm event in 15 minutes. The mass event content list: 1 -indicates MG interface fault 2 -indicates SIP user register … |
| 1.3.6.1.4.1.2011.6.36.11.23.6 | ScalarhwOntVoipMassEventThreshold | read-write | current | Indicates the threshold for mass ONT voip alarm event in 15 minutes. Default: 100 |
| 1.3.6.1.4.1.2011.6.36.11.23.7 | ScalarhwOntVoipFaultEventStartHour | read-only | current | Indicates the start time(hour) of detecting mass event. |
| 1.3.6.1.4.1.2011.6.36.11.23.8 | ScalarhwOntVoipFaultEventStartMinute | read-only | current | Indicates the start time(minute) of detecting mass event. |
| 1.3.6.1.4.1.2011.6.36.11.23.9 | ScalarhwOntVoipFaultEventEndHour | read-only | current | Indicates the end time(hour) of detecting mass event. |
| 1.3.6.1.4.1.2011.6.36.11.23.10 | ScalarhwOntVoipFaultEventEndMinute | read-only | current | Indicates the end time(minute) of detecting mass event. |
| 1.3.6.1.4.1.2011.6.36.11.23.11 | ScalarhwOntVoipMassMGAlarmThreshold | read-write | current | Indicates the threshold for mass MG interface alarm. Default: 100 |
| 1.3.6.1.4.1.2011.6.36.11.24 | TablehwOntVoipToneTable | not-accessible | current | The ONT VoIP tone table. The indexes of this table are hwOntVoipToneProfileIndex, hwOntVoipToneIndex |
| 1.3.6.1.4.1.2011.6.36.11.24.1 | RowhwOntVoipToneEntry | not-accessible | current | The ONT VoIP tone table. The indexes of this entry are hwOntVoipToneProfileIndex, hwOntVoipToneIndex |
| 1.3.6.1.4.1.2011.6.36.11.24.1.1 | ColumnhwOntVoipToneProfileIndex | not-accessible | current | Indicates the index of the voip ont profile. |
| 1.3.6.1.4.1.2011.6.36.11.24.1.2 | ColumnhwOntVoipToneIndex | not-accessible | current | Indicates the index of the ont voip tone. Options: 1. Busy 2. Confirmation 3. Dial 4. Message waiting 5. Off hook warning (receiver off hook) 6. Ringback (audi… |
| 1.3.6.1.4.1.2011.6.36.11.24.1.3 | ColumnhwOntVoipToneCadence1Freq1 | read-write | current | Indicates the tone frequency 1 used by cadence 1, which can be single-frequency, dual-frequency, three-frequency, and four-frequency. Single-frequency tone: On… |
| 1.3.6.1.4.1.2011.6.36.11.24.1.4 | ColumnhwOntVoipToneCadence1Freq2 | read-write | current | Indicates the tone frequency 2 used by cadence 1, which can be single-frequency, dual-frequency, three-frequency, and four-frequency. Single-frequency tone: On… |
| 1.3.6.1.4.1.2011.6.36.11.24.1.5 | ColumnhwOntVoipToneCadence1Freq3 | read-write | current | Indicates the tone frequency 3 used by cadence 1, which can be single-frequency, dual-frequency, three-frequency, and four-frequency. Single-frequency tone: On… |
| 1.3.6.1.4.1.2011.6.36.11.24.1.6 | ColumnhwOntVoipToneCadence1Freq4 | read-write | current | Indicates the tone frequency 4 used by cadence 1, which can be single-frequency, dual-frequency, three-frequency, and four-frequency. Single-frequency tone: On… |
| 1.3.6.1.4.1.2011.6.36.11.24.1.7 | ColumnhwOntVoipToneCadence1Level1 | read-write | current | Indicates the power level of the corresponding frequency component. It ranges from 0 (coded as 0) to -25.5 (coded as 255 ) dBm0 with 0.1 dB resolution. Three a… |
| 1.3.6.1.4.1.2011.6.36.11.24.1.8 | ColumnhwOntVoipToneCadence1Level2 | read-write | current | Indicates the power level of the corresponding frequency component. It ranges from 0 (coded as 0) to -25.5 (coded as 255 ) dBm0 with 0.1 dB resolution. This pa… |
| 1.3.6.1.4.1.2011.6.36.11.24.1.9 | ColumnhwOntVoipToneCadence1Level3 | read-write | current | Indicates the power level of the corresponding frequency component. It ranges from 0 (coded as 0) to -25.5 (coded as 255 ) dBm0 with 0.1 dB resolution. This pa… |
| 1.3.6.1.4.1.2011.6.36.11.24.1.10 | ColumnhwOntVoipToneCadence1Level4 | read-write | current | Indicates the power level of the corresponding frequency component. It ranges from 0 (coded as 0) to -25.5 (coded as 255 ) dBm0 with 0.1 dB resolution. This pa… |
| 1.3.6.1.4.1.2011.6.36.11.24.1.11 | ColumnhwOntVoipToneCadence1ModulationFreq | read-write | current | The pair of frequency-power components allows the composite tone to be modulated (warble effect). If this effect is not to be used, the frequency should be set… |
| 1.3.6.1.4.1.2011.6.36.11.24.1.12 | ColumnhwOntVoipToneCadence1ModulationLevel | read-write | current | The pair of frequency-power components allows the composite tone to be modulated (warble effect). If this effect is not to be used, the frequency should be set… |
| 1.3.6.1.4.1.2011.6.36.11.24.1.13 | ColumnhwOntVoipToneCadence1OnTime | read-write | current | Indicates the tone on duration of cadence 1. Value -1 indicates that the ringing duration is invalid or is not set. Unit: millisecond (ms). This parameter is m… |
| 1.3.6.1.4.1.2011.6.36.11.24.1.14 | ColumnhwOntVoipToneCadence1OffTime | read-write | current | Indicates the tone off duration of cadence 1. If the tone is off, the frequency and power fields are not meaningful. Value -1 indicates that the ringing durati… |
| 1.3.6.1.4.1.2011.6.36.11.24.1.15 | ColumnhwOntVoipToneCadence1RepeatTimes | read-write | current | Indicates the times of playing cadence 1. If this parameter is set, the cadence is played for the specified times according to the ratio of ontime to offtime. … |
| 1.3.6.1.4.1.2011.6.36.11.24.1.16 | ColumnhwOntVoipToneCadence2Freq1 | read-write | current | Indicates the tone frequency 1 used by cadence 2, which can be single-frequency, dual-frequency, three-frequency, and four-frequency. Single-frequency tone: On… |
| 1.3.6.1.4.1.2011.6.36.11.24.1.17 | ColumnhwOntVoipToneCadence2Freq2 | read-write | current | Indicates the tone frequency 2 used by cadence 2, which can be single-frequency, dual-frequency, three-frequency, and four-frequency. Single-frequency tone: On… |
| 1.3.6.1.4.1.2011.6.36.11.24.1.18 | ColumnhwOntVoipToneCadence2Freq3 | read-write | current | Indicates the tone frequency 3 used by cadence 2, which can be single-frequency, dual-frequency, three-frequency, and four-frequency. Single-frequency tone: On… |
| 1.3.6.1.4.1.2011.6.36.11.24.1.19 | ColumnhwOntVoipToneCadence2Freq4 | read-write | current | Indicates the tone frequency 4 used by cadence 2, which can be single-frequency, dual-frequency, three-frequency, and four-frequency. Single-frequency tone: On… |
| 1.3.6.1.4.1.2011.6.36.11.24.1.20 | ColumnhwOntVoipToneCadence2Level1 | read-write | current | Indicates the power level of the corresponding frequency component. It ranges from 0 (coded as 0) to -25.5 (coded as 255 ) dBm0 with 0.1 dB resolution. Three a… |
| 1.3.6.1.4.1.2011.6.36.11.24.1.21 | ColumnhwOntVoipToneCadence2Level2 | read-write | current | Indicates the power level of the corresponding frequency component. It ranges from 0 (coded as 0) to -25.5 (coded as 255 ) dBm0 with 0.1 dB resolution. This pa… |
| 1.3.6.1.4.1.2011.6.36.11.24.1.22 | ColumnhwOntVoipToneCadence2Level3 | read-write | current | Indicates the power level of the corresponding frequency component. It ranges from 0 (coded as 0) to -25.5 (coded as 255 ) dBm0 with 0.1 dB resolution. This pa… |
| 1.3.6.1.4.1.2011.6.36.11.24.1.23 | ColumnhwOntVoipToneCadence2Level4 | read-write | current | Indicates the power level of the corresponding frequency component. It ranges from 0 (coded as 0) to -25.5 (coded as 255 ) dBm0 with 0.1 dB resolution. This pa… |
| 1.3.6.1.4.1.2011.6.36.11.24.1.24 | ColumnhwOntVoipToneCadence2ModulationFreq | read-write | current | The pair of frequency-power components allows the composite tone to be modulated (warble effect). If this effect is not to be used, the frequency should be set… |
| 1.3.6.1.4.1.2011.6.36.11.24.1.25 | ColumnhwOntVoipToneCadence2ModulationLevel | read-write | current | The pair of frequency-power components allows the composite tone to be modulated (warble effect). If this effect is not to be used, the frequency should be set… |
| 1.3.6.1.4.1.2011.6.36.11.24.1.26 | ColumnhwOntVoipToneCadence2OnTime | read-write | current | Indicates the tone on duration of cadence 2. Value -1 indicates that the ringing duration is invalid or is not set. Unit: millisecond (ms). This parameter is o… |
| 1.3.6.1.4.1.2011.6.36.11.24.1.27 | ColumnhwOntVoipToneCadence2OffTime | read-write | current | Indicates the tone off duration of cadence 2. If the tone is off, the frequency and power fields are not meaningful. Value -1 indicates that the ringing durati… |
| 1.3.6.1.4.1.2011.6.36.11.24.1.28 | ColumnhwOntVoipToneCadence2RepeatTimes | read-write | current | Indicates the times of playing cadence 2. If this parameter is set, the cadence is played for the specified times according to the ratio of ontime to offtime. … |
| 1.3.6.1.4.1.2011.6.36.11.24.1.29 | ColumnhwOntVoipToneCadence3Freq1 | read-write | current | Indicates the tone frequency 1 used by cadence 3, which can be single-frequency, dual-frequency, three-frequency, and four-frequency. Single-frequency tone: On… |
| 1.3.6.1.4.1.2011.6.36.11.24.1.30 | ColumnhwOntVoipToneCadence3Freq2 | read-write | current | Indicates the tone frequency 2 used by cadence 3, which can be single-frequency, dual-frequency, three-frequency, and four-frequency. Single-frequency tone: On… |
| 1.3.6.1.4.1.2011.6.36.11.24.1.31 | ColumnhwOntVoipToneCadence3Freq3 | read-write | current | Indicates the tone frequency 3 used by cadence 3, which can be single-frequency, dual-frequency, three-frequency, and four-frequency. Single-frequency tone: On… |
| 1.3.6.1.4.1.2011.6.36.11.24.1.32 | ColumnhwOntVoipToneCadence3Freq4 | read-write | current | Indicates the tone frequency 4 used by cadence 3, which can be single-frequency, dual-frequency, three-frequency, and four-frequency. Single-frequency tone: On… |
| 1.3.6.1.4.1.2011.6.36.11.24.1.33 | ColumnhwOntVoipToneCadence3Level1 | read-write | current | Indicates the power level of the corresponding frequency component. It ranges from 0 (coded as 0) to -25.5 (coded as 255 ) dBm0 with 0.1 dB resolution. Three a… |
| 1.3.6.1.4.1.2011.6.36.11.24.1.34 | ColumnhwOntVoipToneCadence3Level2 | read-write | current | Indicates the power level of the corresponding frequency component. It ranges from 0 (coded as 0) to -25.5 (coded as 255 ) dBm0 with 0.1 dB resolution. This pa… |
| 1.3.6.1.4.1.2011.6.36.11.24.1.35 | ColumnhwOntVoipToneCadence3Level3 | read-write | current | Indicates the power level of the corresponding frequency component. It ranges from 0 (coded as 0) to -25.5 (coded as 255 ) dBm0 with 0.1 dB resolution. This pa… |
| 1.3.6.1.4.1.2011.6.36.11.24.1.36 | ColumnhwOntVoipToneCadence3Level4 | read-write | current | Indicates the power level of the corresponding frequency component. It ranges from 0 (coded as 0) to -25.5 (coded as 255 ) dBm0 with 0.1 dB resolution. This pa… |
| 1.3.6.1.4.1.2011.6.36.11.24.1.37 | ColumnhwOntVoipToneCadence3ModulationFreq | read-write | current | The pair of frequency-power components allows the composite tone to be modulated (warble effect). If this effect is not to be used, the frequency should be set… |
| 1.3.6.1.4.1.2011.6.36.11.24.1.38 | ColumnhwOntVoipToneCadence3ModulationLevel | read-write | current | The pair of frequency-power components allows the composite tone to be modulated (warble effect). If this effect is not to be used, the frequency should be set… |
| 1.3.6.1.4.1.2011.6.36.11.24.1.39 | ColumnhwOntVoipToneCadence3OnTime | read-write | current | Indicates the tone on duration of cadence 3. Value -1 indicates that the ringing duration is invalid or is not set. Unit: millisecond (ms). This parameter is o… |
| 1.3.6.1.4.1.2011.6.36.11.24.1.40 | ColumnhwOntVoipToneCadence3OffTime | read-write | current | Indicates the tone off duration of cadence 3. If the tone is off, the frequency and power fields are not meaningful. Value -1 indicates that the ringing durati… |
| 1.3.6.1.4.1.2011.6.36.11.24.1.41 | ColumnhwOntVoipToneCadence3RepeatTimes | read-write | current | Indicates the times of playing cadence 3. If this parameter is set, the cadence is played for the specified times according to the ratio of ontime to offtime. … |
| 1.3.6.1.4.1.2011.6.36.11.24.1.42 | ColumnhwOntVoipToneCadence4Freq1 | read-write | current | Indicates the tone frequency 1 used by cadence 4, which can be single-frequency, dual-frequency, three-frequency, and four-frequency. Single-frequency tone: On… |
| 1.3.6.1.4.1.2011.6.36.11.24.1.43 | ColumnhwOntVoipToneCadence4Freq2 | read-write | current | Indicates the tone frequency 2 used by cadence 4, which can be single-frequency, dual-frequency, three-frequency, and four-frequency. Single-frequency tone: On… |
| 1.3.6.1.4.1.2011.6.36.11.24.1.44 | ColumnhwOntVoipToneCadence4Freq3 | read-write | current | Indicates the tone frequency 3 used by cadence 4, which can be single-frequency, dual-frequency, three-frequency, and four-frequency. Single-frequency tone: On… |
| 1.3.6.1.4.1.2011.6.36.11.24.1.45 | ColumnhwOntVoipToneCadence4Freq4 | read-write | current | Indicates the tone frequency 4 used by cadence 4, which can be single-frequency, dual-frequency, three-frequency, and four-frequency. Single-frequency tone: On… |
| 1.3.6.1.4.1.2011.6.36.11.24.1.46 | ColumnhwOntVoipToneCadence4Level1 | read-write | current | Indicates the power level of the corresponding frequency component. It ranges from 0 (coded as 0) to -25.5 (coded as 255 ) dBm0 with 0.1 dB resolution. Three a… |
| 1.3.6.1.4.1.2011.6.36.11.24.1.47 | ColumnhwOntVoipToneCadence4Level2 | read-write | current | Indicates the power level of the corresponding frequency component. It ranges from 0 (coded as 0) to -25.5 (coded as 255 ) dBm0 with 0.1 dB resolution. This pa… |
| 1.3.6.1.4.1.2011.6.36.11.24.1.48 | ColumnhwOntVoipToneCadence4Level3 | read-write | current | Indicates the power level of the corresponding frequency component. It ranges from 0 (coded as 0) to -25.5 (coded as 255 ) dBm0 with 0.1 dB resolution. This pa… |
| 1.3.6.1.4.1.2011.6.36.11.24.1.49 | ColumnhwOntVoipToneCadence4Level4 | read-write | current | Indicates the power level of the corresponding frequency component. It ranges from 0 (coded as 0) to -25.5 (coded as 255 ) dBm0 with 0.1 dB resolution. This pa… |
| 1.3.6.1.4.1.2011.6.36.11.24.1.50 | ColumnhwOntVoipToneCadence4ModulationFreq | read-write | current | The pair of frequency-power components allows the composite tone to be modulated (warble effect). If this effect is not to be used, the frequency should be set… |
| 1.3.6.1.4.1.2011.6.36.11.24.1.51 | ColumnhwOntVoipToneCadence4ModulationLevel | read-write | current | The pair of frequency-power components allows the composite tone to be modulated (warble effect). If this effect is not to be used, the frequency should be set… |
| 1.3.6.1.4.1.2011.6.36.11.24.1.52 | ColumnhwOntVoipToneCadence4OnTime | read-write | current | Indicates the tone on duration of cadence 4. Value -1 indicates that the ringing duration is invalid or is not set. Unit: millisecond (ms). This parameter is o… |
| 1.3.6.1.4.1.2011.6.36.11.24.1.53 | ColumnhwOntVoipToneCadence4OffTime | read-write | current | Indicates the tone off duration of cadence 4. If the tone is off, the frequency and power fields are not meaningful. Value -1 indicates that the ringing durati… |
| 1.3.6.1.4.1.2011.6.36.11.24.1.54 | ColumnhwOntVoipToneCadence4RepeatTimes | read-write | current | Indicates the times of playing cadence 4. If this parameter is set, the cadence is played for the specified times according to the ratio of ontime to offtime. … |
| 1.3.6.1.4.1.2011.6.36.11.24.1.55 | ColumnhwOntVoipToneCadence5Freq1 | read-write | current | Indicates the tone frequency 1 used by cadence 5, which can be single-frequency, dual-frequency, three-frequency, and four-frequency. Single-frequency tone: On… |
| 1.3.6.1.4.1.2011.6.36.11.24.1.56 | ColumnhwOntVoipToneCadence5Freq2 | read-write | current | Indicates the tone frequency 2 used by cadence 5, which can be single-frequency, dual-frequency, three-frequency, and four-frequency. Single-frequency tone: On… |
| 1.3.6.1.4.1.2011.6.36.11.24.1.57 | ColumnhwOntVoipToneCadence5Freq3 | read-write | current | Indicates the tone frequency 3 used by cadence 5, which can be single-frequency, dual-frequency, three-frequency, and four-frequency. Single-frequency tone: On… |
| 1.3.6.1.4.1.2011.6.36.11.24.1.58 | ColumnhwOntVoipToneCadence5Freq4 | read-write | current | Indicates the tone frequency 4 used by cadence 5, which can be single-frequency, dual-frequency, three-frequency, and four-frequency. Single-frequency tone: On… |
| 1.3.6.1.4.1.2011.6.36.11.24.1.59 | ColumnhwOntVoipToneCadence5Level1 | read-write | current | Indicates the power level of the corresponding frequency component. It ranges from 0 (coded as 0) to -25.5 (coded as 255 ) dBm0 with 0.1 dB resolution. Three a… |
| 1.3.6.1.4.1.2011.6.36.11.24.1.60 | ColumnhwOntVoipToneCadence5Level2 | read-write | current | Indicates the power level of the corresponding frequency component. It ranges from 0 (coded as 0) to -25.5 (coded as 255 ) dBm0 with 0.1 dB resolution. This pa… |
| 1.3.6.1.4.1.2011.6.36.11.24.1.61 | ColumnhwOntVoipToneCadence5Level3 | read-write | current | Indicates the power level of the corresponding frequency component. It ranges from 0 (coded as 0) to -25.5 (coded as 255 ) dBm0 with 0.1 dB resolution. This pa… |
| 1.3.6.1.4.1.2011.6.36.11.24.1.62 | ColumnhwOntVoipToneCadence5Level4 | read-write | current | Indicates the power level of the corresponding frequency component. It ranges from 0 (coded as 0) to -25.5 (coded as 255 ) dBm0 with 0.1 dB resolution. This pa… |
| 1.3.6.1.4.1.2011.6.36.11.24.1.63 | ColumnhwOntVoipToneCadence5ModulationFreq | read-write | current | The pair of frequency-power components allows the composite tone to be modulated (warble effect). If this effect is not to be used, the frequency should be set… |
| 1.3.6.1.4.1.2011.6.36.11.24.1.64 | ColumnhwOntVoipToneCadence5ModulationLevel | read-write | current | The pair of frequency-power components allows the composite tone to be modulated (warble effect). If this effect is not to be used, the frequency should be set… |
| 1.3.6.1.4.1.2011.6.36.11.24.1.65 | ColumnhwOntVoipToneCadence5OnTime | read-write | current | Indicates the tone on duration of cadence 5. Value -1 indicates that the ringing duration is invalid or is not set. Unit: millisecond (ms). This parameter is o… |
| 1.3.6.1.4.1.2011.6.36.11.24.1.66 | ColumnhwOntVoipToneCadence5OffTime | read-write | current | Indicates the tone off duration of cadence 5. If the tone is off, the frequency and power fields are not meaningful. Value -1 indicates that the ringing durati… |
| 1.3.6.1.4.1.2011.6.36.11.24.1.67 | ColumnhwOntVoipToneCadence5RepeatTimes | read-write | current | Indicates the times of playing cadence 5. If this parameter is set, the cadence is played for the specified times according to the ratio of ontime to offtime. … |
| 1.3.6.1.4.1.2011.6.36.11.24.1.68 | ColumnhwOntVoipToneCadence6Freq1 | read-write | current | Indicates the tone frequency 1 used by cadence 6, which can be single-frequency, dual-frequency, three-frequency, and four-frequency. Single-frequency tone: On… |
| 1.3.6.1.4.1.2011.6.36.11.24.1.69 | ColumnhwOntVoipToneCadence6Freq2 | read-write | current | Indicates the tone frequency 2 used by cadence 6, which can be single-frequency, dual-frequency, three-frequency, and four-frequency. Single-frequency tone: On… |
| 1.3.6.1.4.1.2011.6.36.11.24.1.70 | ColumnhwOntVoipToneCadence6Freq3 | read-write | current | Indicates the tone frequency 3 used by cadence 6, which can be single-frequency, dual-frequency, three-frequency, and four-frequency. Single-frequency tone: On… |
| 1.3.6.1.4.1.2011.6.36.11.24.1.71 | ColumnhwOntVoipToneCadence6Freq4 | read-write | current | Indicates the tone frequency 4 used by cadence 6, which can be single-frequency, dual-frequency, three-frequency, and four-frequency. Single-frequency tone: On… |
| 1.3.6.1.4.1.2011.6.36.11.24.1.72 | ColumnhwOntVoipToneCadence6Level1 | read-write | current | Indicates the power level of the corresponding frequency component. It ranges from 0 (coded as 0) to -25.5 (coded as 255 ) dBm0 with 0.1 dB resolution. Three a… |
| 1.3.6.1.4.1.2011.6.36.11.24.1.73 | ColumnhwOntVoipToneCadence6Level2 | read-write | current | Indicates the power level of the corresponding frequency component. It ranges from 0 (coded as 0) to -25.5 (coded as 255 ) dBm0 with 0.1 dB resolution. This pa… |
| 1.3.6.1.4.1.2011.6.36.11.24.1.74 | ColumnhwOntVoipToneCadence6Level3 | read-write | current | Indicates the power level of the corresponding frequency component. It ranges from 0 (coded as 0) to -25.5 (coded as 255 ) dBm0 with 0.1 dB resolution. This pa… |
| 1.3.6.1.4.1.2011.6.36.11.24.1.75 | ColumnhwOntVoipToneCadence6Level4 | read-write | current | Indicates the power level of the corresponding frequency component. It ranges from 0 (coded as 0) to -25.5 (coded as 255 ) dBm0 with 0.1 dB resolution. This pa… |
| 1.3.6.1.4.1.2011.6.36.11.24.1.76 | ColumnhwOntVoipToneCadence6ModulationFreq | read-write | current | The pair of frequency-power components allows the composite tone to be modulated (warble effect). If this effect is not to be used, the frequency should be set… |
| 1.3.6.1.4.1.2011.6.36.11.24.1.77 | ColumnhwOntVoipToneCadence6ModulationLevel | read-write | current | The pair of frequency-power components allows the composite tone to be modulated (warble effect). If this effect is not to be used, the frequency should be set… |
| 1.3.6.1.4.1.2011.6.36.11.24.1.78 | ColumnhwOntVoipToneCadence6OnTime | read-write | current | Indicates the tone on duration of cadence 6. Value -1 indicates that the ringing duration is invalid or is not set. Unit: millisecond (ms). This parameter is o… |
| 1.3.6.1.4.1.2011.6.36.11.24.1.79 | ColumnhwOntVoipToneCadence6OffTime | read-write | current | Indicates the tone off duration of cadence 6. If the tone is off, the frequency and power fields are not meaningful. Value -1 indicates that the ringing durati… |
| 1.3.6.1.4.1.2011.6.36.11.24.1.80 | ColumnhwOntVoipToneCadence6RepeatTimes | read-write | current | Indicates the times of playing cadence 6. If this parameter is set, the cadence is played for the specified times according to the ratio of ontime to offtime. … |
| 1.3.6.1.4.1.2011.6.36.11.24.1.81 | ColumnhwOntVoipToneRowStatus | read-create | current | Options: 1.active(1) -indicates active 2.notInService(2) -indicates not in service 3.notReady(3) -indicates not ready 4.createAndGo(4) -indicates create and go… |
| 1.3.6.1.4.1.2011.6.36.11.25 | TablehwOntVoipRingTable | not-accessible | current | The ONT VoIP ring table. The indexes of this entry are hwOntVoipRingProfileIndex, hwOntVoipRingIndex |
| 1.3.6.1.4.1.2011.6.36.11.25.1 | RowhwOntVoipRingEntry | not-accessible | current | The ONT VoIP ring table. The indexes of this entry are hwOntVoipRingProfileIndex, hwOntVoipRingIndex |
| 1.3.6.1.4.1.2011.6.36.11.25.1.1 | ColumnhwOntVoipRingProfileIndex | not-accessible | current | Indicates the index of the ont voip ring profile. |
| 1.3.6.1.4.1.2011.6.36.11.25.1.2 | ColumnhwOntVoipRingIndex | not-accessible | current | Indicates the index of the ont voip ring. Options: 1. Default 2. Splash 3..223. Reserved 224..255. Vendor-specific codes, not to be standardized |
| 1.3.6.1.4.1.2011.6.36.11.25.1.3 | ColumnhwOntVoipRingCadence1OnTime | read-write | current | Indicates the ringing on duration of cadence 1. Unit: millisecond (ms). Value -1 indicates that the ringing duration is invalid or is not set. This parameter i… |
| 1.3.6.1.4.1.2011.6.36.11.25.1.4 | ColumnhwOntVoipRingCadence1OffTime | read-write | current | Indicates the ringing off duration of cadence 1. Unit: millisecond (ms). Value -1 indicates that the ringing stop duration is invalid or is not set. This param… |
| 1.3.6.1.4.1.2011.6.36.11.25.1.5 | ColumnhwOntVoipRingCadence2OnTime | read-write | current | Indicates the ringing on duration of cadence 2. Unit: millisecond (ms). Value -1 indicates that the ringing duration is invalid or is not set. This parameter i… |
| 1.3.6.1.4.1.2011.6.36.11.25.1.6 | ColumnhwOntVoipRingCadence2OffTime | read-write | current | Indicates the ringing off duration of cadence 2. Unit: millisecond (ms). Value -1 indicates that the ringing stop duration is invalid or is not set. This param… |
| 1.3.6.1.4.1.2011.6.36.11.25.1.7 | ColumnhwOntVoipRingCadence3OnTime | read-write | current | Indicates the ringing on duration of cadence 3. Unit: millisecond (ms). Value -1 indicates that the ringing duration is invalid or is not set. This parameter i… |
| 1.3.6.1.4.1.2011.6.36.11.25.1.8 | ColumnhwOntVoipRingCadence3OffTime | read-write | current | Indicates the ringing off duration of cadence 3. Unit: millisecond (ms). Value -1 indicates that the ringing stop duration is invalid or is not set. This param… |
| 1.3.6.1.4.1.2011.6.36.11.25.1.9 | ColumnhwOntVoipRingRowStatus | read-create | current | Options: 1.active(1) -indicates active 2.notInService(2) -indicates not in service 3.notReady(3) -indicates not ready 4.createAndGo(4) -indicates create and go… |
| 1.3.6.1.4.1.2011.6.36.11.26 | TablehwOntVoipSignalProfileTable | not-accessible | current | The ONT VoIP signal profile table. The index of this table is hwOntVoipSignalProfileIndex. |
| 1.3.6.1.4.1.2011.6.36.11.26.1 | RowhwOntVoipSignalProfileEntry | not-accessible | current | The ONT VoIP signal profile table. The index of this entry is hwOntVoipSignalProfileIndex. |
| 1.3.6.1.4.1.2011.6.36.11.26.1.1 | ColumnhwOntVoipSignalProfileIndex | not-accessible | current | Indicates the index of the ONT VoIP signal profile. |
| 1.3.6.1.4.1.2011.6.36.11.26.1.2 | ColumnhwOntVoipSignalProfileName | read-write | current | Indicates the name of the ONT VoIP signal profile. |
| 1.3.6.1.4.1.2011.6.36.11.26.1.3 | ColumnhwOntVoipSignalProfileBinNum | read-only | current | Indicates the number of ONT bound with ONT VoIP signal profile. |
| 1.3.6.1.4.1.2011.6.36.11.26.1.4 | ColumnhwOntVoipSignalProfileCommit | read-write | current | Indicates the ONT VoIP signal profile Configuration Commit. Options: 1. commitExecute(1) - Execute the ONT VoIP signal profile configuration commit 2. clearRes… |
| 1.3.6.1.4.1.2011.6.36.11.26.1.5 | ColumnhwOntVoipSignalProfileCommitResult | read-only | current | Indicates the commit result of a ONT VoIP signal profile, the aging time of the result is 20s. Options: 1. success(1) - Indicates that the commit result is suc… |
| 1.3.6.1.4.1.2011.6.36.11.26.1.6 | ColumnhwOntVoipSignalProfileRowStatus | read-create | current | Options: 1.active(1) -indicates active 2.notInService(2) -indicates not in service 3.notReady(3) -indicates not ready 4.createAndGo(4) -indicates create and go… |
| 1.3.6.1.4.1.2011.6.36.11.27 | TablehwOntVoipBindSignalProfileTable | not-accessible | current | The ONT VoIP bind config table. The indexes of this table are hwVoiceIfIndex, hwVoiceOntIndex. |
| 1.3.6.1.4.1.2011.6.36.11.27.1 | RowhwOntVoipBindSignalProfileEntry | not-accessible | current | The ONT VoIP bind config table. The indexes of this entry are hwVoiceIfIndex, hwVoiceOntIndex. |
| 1.3.6.1.4.1.2011.6.36.11.27.1.1 | ColumnhwOntVoipBindOprType | read-write | current | Indicates the bind operator type. Options: 1. bind(1) - Indicates that the bind operator 2. unbind(2) - Indicates that the unbind operator 4. invalid(-1) - Ind… |
| 1.3.6.1.4.1.2011.6.36.11.27.1.2 | ColumnhwOntVoipBindSignalProfileIndex | read-write | current | Indicates the index of bind voip signal profile. |
| 1.3.6.1.4.1.2011.6.36.11.28 | TablehwOntVoipIpIndexTable | not-accessible | current | The ONT tr069 VoIP config table. The indexes of this table are hwVoiceIfIndex, hwVoiceOntIndex. |
| 1.3.6.1.4.1.2011.6.36.11.28.1 | RowhwOntVoipIpIndexEntry | not-accessible | current | The ONT tr069 VoIP config table. The indexes of this entry are hwVoiceIfIndex, hwVoiceOntIndex. |
| 1.3.6.1.4.1.2011.6.36.11.28.1.1 | ColumnhwOntVoipIpIndexOprType | read-write | current | Indicates the bind operator type. Options: 1. bind(1) - Indicates that the bind operator 2. unbind(2) - Indicates that the unbind operator 4. invalid(-1) - Ind… |
| 1.3.6.1.4.1.2011.6.36.11.28.1.2 | ColumnhwOntVoipIpIndex | read-write | current | Indicates the IP index. Value -1 indicates that the query fails or no information is detected |
| 1.3.6.1.4.1.2011.6.36.11.29 | TablehwOntRecentVoipAlarmRecordTable | not-accessible | current | The ONT voip Alarm Record table. The indexes of this table is hwOntRecentVoipAlarmBlockIndex. |
| 1.3.6.1.4.1.2011.6.36.11.29.1 | RowhwOntRecentVoipAlarmRecordEntry | not-accessible | current | The ONT voip Alarm Record config table. The indexes of this entry is hwOntRecentVoipAlarmBlockIndex. |
| 1.3.6.1.4.1.2011.6.36.11.29.1.1 | ColumnhwOntRecentVoipAlarmBlockIndex | not-accessible | current | Indicates the index of the ONT voip Alarm Record. |
| 1.3.6.1.4.1.2011.6.36.11.29.1.2 | ColumnhwOntRecentVoipAlarmOctetString | read-only | current | Indicates the ONT voip Alarm Record. Every index indicates 50 records maximum. Every record includes 18 bytes. Record number() Year(2byte) : 65535-invalid Mont… |
| 1.3.6.1.4.1.2011.6.36.12 | NodehwVoipOntTraps | |||
| 1.3.6.1.4.1.2011.6.36.12.0 | NotificationhwOntCallerEmulateOperatorTrap | current | This notification indicates that the trap for ont caller emulate test result: 1. hwOntPstnCallerEmulateTestRequestID 2. hwVoiceIfIndex 3. hwVoiceOntIndex 4. hw… | |
| 1.3.6.1.4.1.2011.6.36.12.1 | NotificationhwOntCalledEmulateOperatorTrap | current | This notification indicates that the trap for ont called emulate test result: 1. hwOntPstnCalledEmulateTestRequestID 2. hwVoiceIfIndex 3. hwVoiceOntIndex 4. hw… | |
| 1.3.6.1.4.1.2011.6.36.12.2 | NotificationhwOntSipUserRegisterAuthAlarmTrap | current | This notification indicates that the trap for ont sip user authenticate fail: 1. hwFrameIndex 2. hwSlotIndex 3. hwPortIndex 4. hwVoiceOntIndex 5. hwVoiceOntPor… | |
| 1.3.6.1.4.1.2011.6.36.12.3 | NotificationhwOntSipUserRegisterAuthRestoreAlarmTrap | current | This notification indicates that the trap for ont sip user authenticate fail restore: 1. hwFrameIndex 2. hwSlotIndex 3. hwPortIndex 4. hwVoiceOntIndex 5. hwVoi… | |
| 1.3.6.1.4.1.2011.6.36.12.4 | NotificationhwOntSipUserRegisterTimeoutAlarmTrap | current | This notification indicates that the trap for ont sip user register time out: 1. hwFrameIndex 2. hwSlotIndex 3. hwPortIndex 4. hwVoiceOntIndex 5. hwVoiceOntPor… | |
| 1.3.6.1.4.1.2011.6.36.12.5 | NotificationhwOntSipUserRegisterTimeoutRestoreAlarmTrap | current | This notification indicates that the trap for ont sip user register time out restore: 1. hwFrameIndex 2. hwSlotIndex 3. hwPortIndex 4. hwVoiceOntIndex 5. hwVoi… | |
| 1.3.6.1.4.1.2011.6.36.12.6 | NotificationhwOntSipUserRegisterFailAlarmTrap | current | This notification indicates that the trap for ont sip user register fail: 1. hwFrameIndex 2. hwSlotIndex 3. hwPortIndex 4. hwVoiceOntIndex 5. hwVoiceOntPortInd… | |
| 1.3.6.1.4.1.2011.6.36.12.7 | NotificationhwOntSipUserRegisterFailRestoreAlarmTrap | current | This notification indicates that the trap for ont sip user register fail restore: 1. hwFrameIndex 2. hwSlotIndex 3. hwPortIndex 4. hwVoiceOntIndex 5. hwVoiceOn… | |
| 1.3.6.1.4.1.2011.6.36.12.8 | NotificationhwOntMgInterfaceFaultAlarmTrap | current | This notification indicates that the trap for ont mg interface fault: 1. hwFrameIndex 2. hwSlotIndex 3. hwPortIndex 4. hwVoiceOntIndex 5. hwVoiceOntMgId | |
| 1.3.6.1.4.1.2011.6.36.12.9 | NotificationhwOntMgInterfaceRestoreAlarmTrap | current | This notification indicates that the trap for ont mg interface restore: 1. hwFrameIndex 2. hwSlotIndex 3. hwPortIndex 4. hwVoiceOntIndex 5. hwVoiceOntMgId | |
| 1.3.6.1.4.1.2011.6.36.12.10 | NotificationhwOntMassSipUserRegisterAuthAlarmTrap | current | This notification indicates that the trap for a mass of ont sip users authenticate fail. | |
| 1.3.6.1.4.1.2011.6.36.12.11 | NotificationhwOntMassSipUserRegisterAuthRestoreAlarmTrap | current | This notification indicates that the trap for a mass of ont sip users authenticate fail restore. | |
| 1.3.6.1.4.1.2011.6.36.12.12 | NotificationhwOntMassSipUserRegisterTimeoutAlarmTrap | current | This notification indicates that the trap for a mass of ont sip users register time out. | |
| 1.3.6.1.4.1.2011.6.36.12.13 | NotificationhwOntMassSipUserRegisterTimeoutRestoreAlarmTrap | current | This notification indicates that the trap for a mass of ont sip users register time out restore. | |
| 1.3.6.1.4.1.2011.6.36.12.14 | NotificationhwOntMassSipUserRegisterFailAlarmTrap | current | This notification indicates that the trap for a mass of ont sip users register fail. | |
| 1.3.6.1.4.1.2011.6.36.12.15 | NotificationhwOntMassSipUserRegisterFailRestoreAlarmTrap | current | This notification indicates that the trap for a mass of ont sip users register fail restore. | |
| 1.3.6.1.4.1.2011.6.36.12.16 | NotificationhwOntMassVoipFaultEventTrap | current | This notification indicates that the trap for a mass of ont voip fault in 15 minutes: 1. hwOntVoipFaultEventStartHour 2. hwOntVoipFaultEventStartMinute 3. hwOn… | |
| 1.3.6.1.4.1.2011.6.36.12.17 | NotificationhwOntMassMgInterfaceFaultAlarmTrap | current | This notification indicates that the trap for a mass of ont mg interface fail. | |
| 1.3.6.1.4.1.2011.6.36.12.18 | NotificationhwOntMassMgInterfaceRestoreAlarmTrap | current | This notification indicates that the trap for a mass of ont mg interface restore. |