HUAWEI-VOP-MIB
474 objects
The MIB is used for xDSL Configuration according to the Vector of Profiles (VoP) data model specified in Broadband Forum Technical Report TR-252 (http://www.broadband-forum.org/technical/download/TR-252_Issue-3.pdf).
Imported Objects
| HUAWEI-DEVICE-MIB | hwConfigChangeIP |
| HUAWEI-MIB | huaweiUtility |
| IF-MIB | ifIndex |
| SNMPv2-SMI | enterprises Gauge32 Integer32 MODULE-IDENTITY NOTIFICATION-TYPE OBJECT-IDENTITY OBJECT-TYPE Unsigned32 |
| SNMPv2-TC | RowStatus TEXTUAL-CONVENTION TruthValue |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.2011.6.144 | IdentityhwVOPGlobalModule | The MIB is used for xDSL Configuration according to the Vector of Profiles (VoP) data model specified in Broadband Forum Technical Report TR-252 (http://www.br… | ||
| 1.3.6.1.4.1.2011.6.144.1 | NodehwVOPObjects | |||
| 1.3.6.1.4.1.2011.6.144.1.1 | NodehwVOPProfiles | |||
| 1.3.6.1.4.1.2011.6.144.1.1.1 | ScalarhwVOPDataRateProfileIndexNext | read-only | current | This object contains an appropriate value to be used for hwVOPDataRateConfProfIndex when creating entries in the hwVOPDataRateConfProfTable. The value '0' indi… |
| 1.3.6.1.4.1.2011.6.144.1.1.2 | TablehwVOPDataRateConfProfTable | not-accessible | current | The table hwVOPDataRateConfProfTable contains data rate configuration parameters for the DSL channel(s). Entries in this table MUST be maintained in a persiste… |
| 1.3.6.1.4.1.2011.6.144.1.1.2.1 | RowhwVOPDataRateConfProfEntry | not-accessible | current | The table hwVOPDataRateConfProfTable contains data rate configuration parameters for the DSL channel(s). Entries in this table MUST be maintained in a persiste… |
| 1.3.6.1.4.1.2011.6.144.1.1.2.1.1 | ColumnhwVOPDataRateConfProfIndex | accessible-for-notify | current | The hwVOPDataRateConfProfIndex identifies a row in the hwVOPDataRateConfProfTable. |
| 1.3.6.1.4.1.2011.6.144.1.1.2.1.2 | ColumnhwVOPDataRateConfProfRowStatus | read-create | current | The hwVOPDataRateConfProfRowStatus is used to create a new row or to modify or delete an existing row in this table. A profile is activated by setting this obj… |
| 1.3.6.1.4.1.2011.6.144.1.1.2.1.3 | ColumnhwVOPDataRateConfProfDescription | read-create | current | The hwVOPDataRateConfProfDescription contains an optional human readable description for the profile. |
| 1.3.6.1.4.1.2011.6.144.1.1.2.1.4 | ColumnhwVOPDataRateConfProfMinDataRate | read-create | current | If retransmission is not used in a given transmit direction,this parameter specifics minimum data rate for the bearer channel. The rate is coded in steps of 10… |
| 1.3.6.1.4.1.2011.6.144.1.1.2.1.5 | ColumnhwVOPDataRateConfProfMinResDataRate | read-create | current | The minimum reserved net data rate for the bearer channel, coded in bit/s. This parameter is only used if the Rate Adaptation Mode in the direction of the bear… |
| 1.3.6.1.4.1.2011.6.144.1.1.2.1.6 | ColumnhwVOPDataRateConfProfMaxDataRate | read-create | current | If retransmission is not used in a given transmit direction,this parameter specifics maximum data rate for the bearer channel. The rate is coded in steps of 10… |
| 1.3.6.1.4.1.2011.6.144.1.1.2.1.7 | ColumnhwVOPDataRateConfProfMinDataRateLowPwr | read-create | current | This parameter specifies the minimum net data rate for the bearer channel as desired by the operator of the system during the low power state (L1/L2). The powe… |
| 1.3.6.1.4.1.2011.6.144.1.1.2.1.8 | ColumnhwVOPDataRateConfProfMaxBer | read-create | current | Maximum Bit Error Ratio of the bearer channel. |
| 1.3.6.1.4.1.2011.6.144.1.1.2.1.9 | ColumnhwVOPDataRateConfProfUsDataRate | read-create | current | If retransmission is not used in a given transmit direction, This parameter is a threshold on the net data rate upshift achieved over one or more bearer channe… |
| 1.3.6.1.4.1.2011.6.144.1.1.2.1.10 | ColumnhwVOPDataRateConfProfDsDataRate | read-create | current | If retransmission is not used in a given transmit direction, This parameter is a threshold on the net data rate downshift achieved over one or more bearer chan… |
| 1.3.6.1.4.1.2011.6.144.1.1.2.1.11 | ColumnhwVOPDataRateConfProfDataPathMode | read-create | current | The channel data path mode. |
| 1.3.6.1.4.1.2011.6.144.1.1.2.1.12 | ColumnhwVOPDataRateConfProfMinEtrRtx | read-create | current | If retransmission is used in a given transmit direction, this parameter specifies the minimum expected throughput for the bearer channel.The values range in st… |
| 1.3.6.1.4.1.2011.6.144.1.1.2.1.13 | ColumnhwVOPDataRateConfProfMaxEtrRtx | read-create | current | If retransmission is used in a given transmit direction, this parameter specifies the maximum expected throughput for the bearer channel.The values range in st… |
| 1.3.6.1.4.1.2011.6.144.1.1.2.1.14 | ColumnhwVOPDataRateConfProfMaxNdrRtx | read-create | current | If retransmission is used in a given transmit direction, this parameter specifies the maximum net data rate for the bearer channel. The values range in steps o… |
| 1.3.6.1.4.1.2011.6.144.1.1.2.1.15 | ColumnhwVOPDataRateConfProfMaxDataRateLowPwr | read-create | current | Indicates the maximum Data Rate in Low Power state. Unit: bits/second |
| 1.3.6.1.4.1.2011.6.144.1.1.2.1.16 | ColumnhwVOPDataRateConfProfL2MinDataRateToL0ActDataRate | read-create | current | The ratio between data rate in low power state and data rate in normal state. |
| 1.3.6.1.4.1.2011.6.144.1.1.2.1.17 | ColumnhwVOPDataRateConfProfMinSosBr | read-create | current | This parameter specifies the minimum net data rate required for a valid SOS request. The valid range of values is from 0 to 65535 Kbps. Unit: Kbps |
| 1.3.6.1.4.1.2011.6.144.1.1.2.1.18 | ColumnhwVOPGfastDataRateConfProfMinEtr | read-create | current | This parameter specifies the minimum expected throughput for the bearer channel. The values range in steps of 1000 bit/s. Unit: bit/s |
| 1.3.6.1.4.1.2011.6.144.1.1.2.1.19 | ColumnhwVOPGfastDataRateConfProfMaxEtr | read-create | obsolete | This parameter specifies the G.fast maximum expected throughput for the bearer channel. The values range in steps of 1000 bit/s. Unit: bit/s |
| 1.3.6.1.4.1.2011.6.144.1.1.2.1.20 | ColumnhwVOPGfastDataRateConfProfMaxNdr | read-create | current | This parameter specifies the G.fast maximum net data rate for the bearer channel. The values range in steps of 1000 bit/s. Unit: bit/s |
| 1.3.6.1.4.1.2011.6.144.1.1.2.1.21 | ColumnhwVOPGfastDataRateConfProfUsDataRate | read-create | current | This parameter is a threshold on the G.fast net data rate upshift achieved over one or more bearer channel data rate adaptations. An upshift rate change alarm … |
| 1.3.6.1.4.1.2011.6.144.1.1.2.1.22 | ColumnhwVOPGfastDataRateConfProfDsDataRate | read-create | current | This parameter is a threshold on the G.fast net data rate downshift achieved over one or more bearer channel data rate adaptations. A downshift rate change ala… |
| 1.3.6.1.4.1.2011.6.144.1.1.3 | ScalarhwVOPLineSpectrumProfileIndexNext | read-only | current | This object contains an appropriate value to be used for hwVOPLineSpectrumConfProfIndex when creating entries in the hwVOPLineSpectrumConfProfTable. The value … |
| 1.3.6.1.4.1.2011.6.144.1.1.4 | TablehwVOPLineSpectrumConfProfTable | not-accessible | current | The table hwVOPLineSpectrumConfProfTable contains the parameters that are mainly set during the service delivery phase, independently for upstream and downstre… |
| 1.3.6.1.4.1.2011.6.144.1.1.4.1 | RowhwVOPLineSpectrumConfProfEntry | not-accessible | current | The table hwVOPLineSpectrumConfProfTable contains the parameters that are mainly set during the service delivery phase, independently for upstream and downstre… |
| 1.3.6.1.4.1.2011.6.144.1.1.4.1.1 | ColumnhwVOPLineSpectrumConfProfIndex | accessible-for-notify | current | The hwVOPLineSpectrumConfProfIndex identifies a row in the hwVOPLineSpectrumConfProfTable. |
| 1.3.6.1.4.1.2011.6.144.1.1.4.1.2 | ColumnhwVOPLineSpectrumConfProfRowStatus | read-create | current | The hwVOPLineSpectrumConfProfRowStatus is used to create a new row or to modify or delete an existing row in this table. A profile is activated by setting this… |
| 1.3.6.1.4.1.2011.6.144.1.1.4.1.3 | ColumnhwVOPLineSpectrumConfProfDescription | read-create | current | The hwVOPLineSpectrumConfProfDescription contains an optional human readable description for the profile. |
| 1.3.6.1.4.1.2011.6.144.1.1.4.1.4 | ColumnhwVOPLineSpectrumConfProfXtuTransSysEna | read-create | current | xTU Transmission System Enabling (XTSE). A list of the different coding types enabled in this profile. It is coded in a bit-map representation with 1 or more b… |
| 1.3.6.1.4.1.2011.6.144.1.1.4.1.5 | ColumnhwVOPLineSpectrumConfProfPmMode | read-create | current | Power management state Enabling (PMMode). Defines the power states the xTU-C or xTU-R may autonomously transition to on this line. This is a set of bits, where… |
| 1.3.6.1.4.1.2011.6.144.1.1.4.1.6 | ColumnhwVOPLineSpectrumConfProfL0Time | read-create | current | The minimum time (in seconds) between an Exit from the L2 state and the next Entry into the L2 state. Unit: seconds. |
| 1.3.6.1.4.1.2011.6.144.1.1.4.1.7 | ColumnhwVOPLineSpectrumConfProfL2Time | read-create | current | The minimum time (in seconds) between an Entry into the L2 state and the first Power Trim in the L2 state and between two consecutive Power Trims in the L2 Sta… |
| 1.3.6.1.4.1.2011.6.144.1.1.4.1.8 | ColumnhwVOPLineSpectrumConfProfL3Time | read-create | current | This minimum time (in seconds) between an Entry into the L3 state and the L0 or L2 state. Unit: seconds |
| 1.3.6.1.4.1.2011.6.144.1.1.4.1.9 | ColumnhwVOPLineSpectrumConfProfL2Atpr | read-create | current | The maximum aggregate transmit power reduction (in dB) that can be performed at transition of L0 to L2 state or through a single Power Trim in the L2 state. Un… |
| 1.3.6.1.4.1.2011.6.144.1.1.4.1.10 | ColumnhwVOPLineSpectrumConfProfL2Atprt | read-create | current | The total maximum aggregate transmit power reduction (in dB) that can be performed in an L2 state. This is the sum of all reductions of L2 Request (i.e., at tr… |
| 1.3.6.1.4.1.2011.6.144.1.1.4.1.11 | ColumnhwVOPLineSpectrumConfProfReferenceClock | read-create | current | This object configures the clock reference for the ATU-C in a VDSL Line. |
| 1.3.6.1.4.1.2011.6.144.1.1.4.1.12 | ColumnhwVOPLineSpectrumConfProfBitSwapDs | read-create | current | Enable or disable the bit swap downstream of a line. |
| 1.3.6.1.4.1.2011.6.144.1.1.4.1.13 | ColumnhwVOPLineSpectrumConfProfBitSwapUs | read-create | current | Enable or disable the bit swap upstream of a line. |
| 1.3.6.1.4.1.2011.6.144.1.1.4.1.14 | ColumnhwVOPLineSpectrumConfProfScMaskDs | read-create | current | Downstream subcarriers mask. A bitmap of 512 bits that allows masking up to 512 downstream subcarriers. If bit i (0 <= i < NSCds) is set to '1', the respective… |
| 1.3.6.1.4.1.2011.6.144.1.1.4.1.15 | ColumnhwVOPLineSpectrumConfProfScMaskUs | read-create | current | Upstream subcarriers mask. A bitmap of 512 bits that allows masking up to 512 downstream subcarriers. If bit i (0 <= i < NSCds) is set to '1', the respective d… |
| 1.3.6.1.4.1.2011.6.144.1.1.4.1.16 | ColumnhwVOPLineSpectrumConfProfVdsl2CarMask | read-create | current | VDSL2 specific subcarriers mask. This configuration parameter defines the restrictions, additional to the band plan, to determine the set of subcarriers allowe… |
| 1.3.6.1.4.1.2011.6.144.1.1.4.1.17 | ColumnhwVOPLineSpectrumConfProfMsgMinUs | read-create | current | Minimum Overhead Rate Upstream. Defines the minimum rate of the message-based overhead that shall be maintained by the xTU in upstream direction. Expressed in … |
| 1.3.6.1.4.1.2011.6.144.1.1.4.1.18 | ColumnhwVOPLineSpectrumConfProfMsgMinDs | read-create | current | Minimum Overhead Rate Downstream. Defines the minimum rate of the message-based overhead that shall be maintained by the xTU in downstream direction. Expressed… |
| 1.3.6.1.4.1.2011.6.144.1.1.4.1.19 | ColumnhwVOPLineSpectrumConfProfProfiles | read-create | current | The configuration parameter contains the G.993.2 profiles to be allowed by the near-end xTU on this line. It is coded in a bitmap representation (0 if not allo… |
| 1.3.6.1.4.1.2011.6.144.1.1.4.1.20 | ColumnhwVOPLineSpectrumConfProfUs0Mask | read-create | current | The configuration parameter contains the US0 PSD masks to be allowed by the near-end xTU on the line. This parameter is only defined for G.993.2 Annex A. It is… |
| 1.3.6.1.4.1.2011.6.144.1.1.4.1.21 | ColumnhwVOPLineSpectrumConfProfCeFlag | read-create | current | This parameter is a bit that enables the use of the optional cyclic extension values. |
| 1.3.6.1.4.1.2011.6.144.1.1.4.1.22 | ColumnhwVOPLineSpectrumConfProfModeSpecificPSDProfilesUsed | read-create | current | The value of this object represents a pointer to one or more rows in the hwVOPModeSpecificPSDConfProfTable. The number of pointers equals to the xDSL modes ena… |
| 1.3.6.1.4.1.2011.6.144.1.1.4.1.23 | ColumnhwVOPLineSpectrumConfProfForceInpDs | read-create | current | If retransmission is not used in a given transmit direction,this parameter indicates that the framer settings of the downstream bearer shall be selected such t… |
| 1.3.6.1.4.1.2011.6.144.1.1.4.1.24 | ColumnhwVOPLineSpectrumConfProfForceInpUs | read-create | current | If retransmission is not used in a given transmit direction,this parameter indicates that the framer settings of the upstream bearer shall be selected such tha… |
| 1.3.6.1.4.1.2011.6.144.1.1.4.1.25 | ColumnhwVOPLineSpectrumConfProfRtxModeDs | read-create | current | The mode of operation of G.998.4 retransmission in downstream direction. Options: 1. forbidden (0) - G.998.4 retransmission not allowed. 2. preferred (1) - G.9… |
| 1.3.6.1.4.1.2011.6.144.1.1.4.1.26 | ColumnhwVOPLineSpectrumConfProfRtxModeUs | read-create | current | The mode of operation of G.998.4 retransmission in upstream direction. Options: 1. forbidden (0) - G.998.4 retransmission not allowed. 2. preferred (1) - G.998… |
| 1.3.6.1.4.1.2011.6.144.1.1.4.1.27 | ColumnhwVOPLineSpectrumConfProfLeftrThreshDs | read-create | current | If retransmission is used in downstream direction, this parameter specifies the threshold for declaring a near-end leftr defect. The value is coded as a fracti… |
| 1.3.6.1.4.1.2011.6.144.1.1.4.1.28 | ColumnhwVOPLineSpectrumConfProfLeftrThreshUs | read-create | current | If retransmission is used in upstream direction, this parameter specifies the threshold for declaring a near-end leftr defect. The value is coded as a fraction… |
| 1.3.6.1.4.1.2011.6.144.1.1.4.1.29 | ColumnhwVOPGfastLineSpectrumConfProfGfastProfiles | read-create | current | The configuration parameter contains the G.fast profiles to be allowed by the near-end xTU on this line. It is coded in a bitmap representation (0 if not allow… |
| 1.3.6.1.4.1.2011.6.144.1.1.4.1.30 | ColumnhwVOPGfastLineSpectrumConfProfLowFreqEdgeValue | read-create | current | Low-frequency Edge Stop-band Mask(LESM). If a LESM is used, the LESM shall be specified with breakpoints. These breakpoints are specified starting from ftr1, w… |
| 1.3.6.1.4.1.2011.6.144.1.1.4.1.31 | ColumnhwVOPGfastLineSpectrumConfProfGfastCarMaskDs | read-create | current | G.fast specific subcarriers mask. This configuration parameter defines the restrictions, additional to the band plan, to determine the set of subcarriers allow… |
| 1.3.6.1.4.1.2011.6.144.1.1.4.1.32 | ColumnhwVOPGfastLineSpectrumConfProfGfastCarMaskUs | read-create | current | G.fast specific subcarriers mask. This configuration parameter defines the restrictions, additional to the band plan, to determine the set of subcarriers allow… |
| 1.3.6.1.4.1.2011.6.144.1.1.5 | ScalarhwVOPModeSpecificPSDProfileIndexNext | read-only | current | This object contains an appropriate value to be used for hwVOPModeSpecificPSDConfProfIndex when creating entries in the hwVOPModeSpecificPSDConfProfTable. The … |
| 1.3.6.1.4.1.2011.6.144.1.1.6 | TablehwVOPModeSpecificPSDConfProfTable | not-accessible | current | The table hwVOPModeSpecificPSDConfProfTable contains the parameters that define the downstream and upstream PSDs for a specific xDSL mode. Entries in this tabl… |
| 1.3.6.1.4.1.2011.6.144.1.1.6.1 | RowhwVOPModeSpecificPSDConfProfEntry | not-accessible | current | The table hwVOPModeSpecificPSDConfProfTable contains the parameters that define the downstream and upstream PSDs for a specific xDSL mode. Entries in this tabl… |
| 1.3.6.1.4.1.2011.6.144.1.1.6.1.1 | ColumnhwVOPModeSpecificPSDConfProfIndex | not-accessible | current | The hwVOPModeSpecificPSDConfProfIndex identifies a row in the hwVOPModeSpecificPSDConfProfTable. |
| 1.3.6.1.4.1.2011.6.144.1.1.6.1.2 | ColumnhwVOPModeSpecificPSDConfProfRowStatus | read-create | current | This object is used to create a new row or to modify or delete an existing row in this table. A profile is activated by setting this object to 'active'. Before… |
| 1.3.6.1.4.1.2011.6.144.1.1.6.1.3 | ColumnhwVOPModeSpecificPSDConfProfDescription | read-create | current | The hwVOPModeSpecificPSDConfProfDescription contains an optional human readable description for the profile. |
| 1.3.6.1.4.1.2011.6.144.1.1.6.1.4 | ColumnhwVOPModeSpecificPSDConfProfXdslMode | read-create | deprecated | A list of the different xDSL modes enabled in this profile. It is coded in a bit-map representation with 1 or more bits set. A bit set to '1' means that the pr… |
| 1.3.6.1.4.1.2011.6.144.1.1.6.1.5 | ColumnhwVOPModeSpecificPSDConfProfMaxNomPsdDs | read-create | current | The maximum nominal transmit PSD in the downstream direction during initialization and Showtime. It ranges from -600 to -300 units of 0.1 dBm/Hz (physical valu… |
| 1.3.6.1.4.1.2011.6.144.1.1.6.1.6 | ColumnhwVOPModeSpecificPSDConfProfMaxNomPsdUs | read-create | current | The maximum nominal transmit PSD in the upstream direction during initialization and Showtime. It ranges from -600 to -300 units of 0.1 dBm/Hz (physical values… |
| 1.3.6.1.4.1.2011.6.144.1.1.6.1.7 | ColumnhwVOPModeSpecificPSDConfProfMaxNomAtpDs | read-create | current | The maximum nominal aggregate transmit power in the downstream direction during initialization and Showtime. It ranges from 0 to 510 units of 0.1 dBm (0 to 255… |
| 1.3.6.1.4.1.2011.6.144.1.1.6.1.8 | ColumnhwVOPModeSpecificPSDConfProfMaxNomAtpUs | read-create | current | The maximum nominal aggregate transmit power in the upstream direction during initialization and Showtime. It ranges from 0 to 510 units of 0.1 dBm (0 to 255 p… |
| 1.3.6.1.4.1.2011.6.144.1.1.6.1.9 | ColumnhwVOPModeSpecificPSDConfProfaxAggRxPwrUs | read-create | current | The maximum upstream aggregate receive power over the relevant set of subcarriers. The xTU-C should verify that the upstream power cutback is such that this ma… |
| 1.3.6.1.4.1.2011.6.144.1.1.6.1.10 | ColumnhwVOPModeSpecificPSDConfProfPsdMaskDs | read-create | current | The downstream PSD mask applicable at the U-R2 reference point. This parameter may impose PSD restrictions (breakpoints) in addition to the Limit PSD mask defi… |
| 1.3.6.1.4.1.2011.6.144.1.1.6.1.11 | ColumnhwVOPModeSpecificPSDConfProfPsdMaskUs | read-create | current | The upstream PSD mask applicable at the U-R2 reference point. This parameter may impose PSD restrictions (breakpoints) in addition to the Limit PSD mask define… |
| 1.3.6.1.4.1.2011.6.144.1.1.6.1.12 | ColumnhwVOPModeSpecificPSDConfProfPsdMaskSelectUs | read-create | current | The selected upstream PSD mask. This parameter is used only for Annexes J and M of G.992.3 and G.992.5, and the same selection is used for all relevant enabled… |
| 1.3.6.1.4.1.2011.6.144.1.1.6.1.13 | ColumnhwVOPModeSpecificPSDConfProfLimitMask | read-create | current | This configuration parameter contains the G.993.2 limit PSD masks of the selected PSD mask class, enabled by the near-end xTU on this line for each class of pr… |
| 1.3.6.1.4.1.2011.6.144.1.1.6.1.14 | ColumnhwVOPModeSpecificPSDConfProfUs0Disable | read-create | current | This configuration parameter indicates if the use of US0 is disabled for each limit PSD mask enabled in the hwVOPModeSpecificPSDConfProfLimitMask parameter. Th… |
| 1.3.6.1.4.1.2011.6.144.1.1.6.1.15 | ColumnhwVOPModeSpecificPSDConfProfClassMask | read-create | current | In order to reduce the number of configuration possibilities, the limit Power Spectral Density masks (see hwVOPModeSpecificPSDConfProfLimitMask) are grouped in… |
| 1.3.6.1.4.1.2011.6.144.1.1.6.1.16 | ColumnhwVOPGfastModeSpecificPSDConfProfPsdMaskDs | read-create | current | The downstream PSD mask applicable at the U-O2 reference point. This parameter may impose PSD restrictions (breakpoints) in addition to the Limit PSD mask defi… |
| 1.3.6.1.4.1.2011.6.144.1.1.6.1.17 | ColumnhwVOPGfastModeSpecificPSDConfProfPsdMaskUs | read-create | current | The upstream PSD mask applicable at the U-R2 reference point. This parameter may impose PSD restrictions (breakpoints) in addition to the Limit PSD mask define… |
| 1.3.6.1.4.1.2011.6.144.1.1.6.1.18 | ColumnhwVOPGfastModeSpecificPSDConfProfMaxNomAtpDs | read-create | current | The G.fast maximum nominal aggregate transmit power in the downstream direction during initialization and Showtime. It ranges from 0 to 510 units of 0.1 dBm (0… |
| 1.3.6.1.4.1.2011.6.144.1.1.6.1.19 | ColumnhwVOPGfastModeSpecificPSDConfProfMaxNomAtpUs | read-create | current | The G.fast maximum nominal aggregate transmit power in the upstream direction during initialization and Showtime. It ranges from 0 to 510 units of 0.1 dBm (0 t… |
| 1.3.6.1.4.1.2011.6.144.1.1.7 | ScalarhwVOPUPBOProfileIndexNext | read-only | current | This object contains an appropriate value to be used for hwVOPUPBOConfProfIndex when creating entries in the hwVOPUPBOConfProfTable. The value '0' indicates th… |
| 1.3.6.1.4.1.2011.6.144.1.1.8 | TablehwVOPUPBOConfProfTable | not-accessible | current | The table hwVOPUPBOConfProfTable contains all the parameters related to upstream power back-off. Entries in this table MUST be maintained in a persistent manne… |
| 1.3.6.1.4.1.2011.6.144.1.1.8.1 | RowhwVOPUPBOConfProfEntry | not-accessible | current | The table hwVOPUPBOConfProfTable contains all the parameters related to upstream power back-off. Entries in this table MUST be maintained in a persistent manne… |
| 1.3.6.1.4.1.2011.6.144.1.1.8.1.1 | ColumnhwVOPUPBOConfProfIndex | accessible-for-notify | current | The hwVOPUPBOConfProfIndex identifies a row in the hwVOPUPBOConfProfTable. |
| 1.3.6.1.4.1.2011.6.144.1.1.8.1.2 | ColumnhwVOPUPBOConfProfRowStatus | read-create | current | This object is used to create a new row or to modify or delete an existing row in this table. A profile is activated by setting this object to 'active'. Before… |
| 1.3.6.1.4.1.2011.6.144.1.1.8.1.3 | ColumnhwVOPUPBOConfProfDescription | read-create | current | The hwVOPUPBOConfProfDescription contains an optional human readable description for the profile. |
| 1.3.6.1.4.1.2011.6.144.1.1.8.1.4 | ColumnhwVOPUPBOConfProfUpboKL | read-create | current | This configuration parameter defines the electrical length expressed in dB at 1MHz, kl0, configured by the CO-MIB.The value ranges from 0 (coded as 0) to 128 d… |
| 1.3.6.1.4.1.2011.6.144.1.1.8.1.5 | ColumnhwVOPUPBOConfProfUpboKLF | read-create | current | Defines the upstream power backoff force mode. |
| 1.3.6.1.4.1.2011.6.144.1.1.8.1.6 | ColumnhwVOPUPBOConfProfKlAuto | read-create | current | This parameter defines the mode in which kl0 is computed when hwVOPUPBOConfProfUpboKLF is auto. Options: 1 2 3 4 |
| 1.3.6.1.4.1.2011.6.144.1.1.8.1.7 | ColumnhwVOPUPBOConfProfPsdAUs1 | read-create | current | This configuration parameter defines the 'a' reference parameter of the UPBO reference PSD used to compute the upstream power back-off for the upstream band US… |
| 1.3.6.1.4.1.2011.6.144.1.1.8.1.8 | ColumnhwVOPUPBOConfProfPsdBUs1 | read-create | current | This configuration parameter defines the 'b' reference parameter of the UPBO reference PSD used to compute the upstream power back-off for the upstream band US… |
| 1.3.6.1.4.1.2011.6.144.1.1.8.1.9 | ColumnhwVOPUPBOConfProfPsdAUs2 | read-create | current | This configuration parameter defines the 'a' reference parameter of the UPBO reference PSD used to compute the upstream power back-off for the upstream band US… |
| 1.3.6.1.4.1.2011.6.144.1.1.8.1.10 | ColumnhwVOPUPBOConfProfPsdBUs2 | read-create | current | This configuration parameter defines the 'b' reference parameter of the UPBO reference PSD used to compute the upstream power back-off for the upstream band US… |
| 1.3.6.1.4.1.2011.6.144.1.1.8.1.11 | ColumnhwVOPUPBOConfProfPsdAUs3 | read-create | current | This configuration parameter defines the 'a' reference parameter of the UPBO reference PSD used to compute the upstream power back-off for the upstream band US… |
| 1.3.6.1.4.1.2011.6.144.1.1.8.1.12 | ColumnhwVOPUPBOConfProfPsdBUs3 | read-create | current | This configuration parameter defines the 'b' reference parameter of the UPBO reference PSD used to compute the upstream power back-off for the upstream band US… |
| 1.3.6.1.4.1.2011.6.144.1.1.8.1.13 | ColumnhwVOPUPBOConfProfPsdAUs4 | read-create | current | This configuration parameter defines the 'a' reference parameter of the UPBO reference PSD used to compute the upstream power back-off for the upstream band US… |
| 1.3.6.1.4.1.2011.6.144.1.1.8.1.14 | ColumnhwVOPUPBOConfProfPsdBUs4 | read-create | current | This configuration parameter defines the 'b' reference parameter of the UPBO reference PSD used to compute the upstream power back-off for the upstream band US… |
| 1.3.6.1.4.1.2011.6.144.1.1.8.1.15 | ColumnhwVOPUPBOConfProfBoostMode | read-create | current | The Equalized FEXT UPBO method. Options: 1. disable(1) - The Equalized FEXT UPBO method is not supported. 2. enable(2) - The Equalized FEXT UPBO method is supp… |
| 1.3.6.1.4.1.2011.6.144.1.1.8.1.16 | ColumnhwVOPUPBOConfProfUpboKLREFUs1 | read-create | current | This parameter defines the UPBO reference electrical length used to compute the upstream power back-off for the upstream band US1, for the optional Equalized F… |
| 1.3.6.1.4.1.2011.6.144.1.1.8.1.17 | ColumnhwVOPUPBOConfProfUpboKLREFUs2 | read-create | current | This parameter defines the UPBO reference electrical length used to compute the upstream power back-off for the upstream band US2, for the optional Equalized F… |
| 1.3.6.1.4.1.2011.6.144.1.1.8.1.18 | ColumnhwVOPUPBOConfProfUpboKLREFUs3 | read-create | current | This parameter defines the UPBO reference electrical length used to compute the upstream power back-off for the upstream band US3, for the optional Equalized F… |
| 1.3.6.1.4.1.2011.6.144.1.1.8.1.19 | ColumnhwVOPUPBOConfProfUpboKLREFUs4 | read-create | current | This parameter defines the UPBO reference electrical length used to compute the upstream power back-off for the upstream band US4, for the optional Equalized F… |
| 1.3.6.1.4.1.2011.6.144.1.1.8.1.20 | ColumnhwVOPUPBOConfProfAeleMode | read-create | current | This parameter defines the UPBO electrical length estimation mode to be used in the Alternative Electrical Length Estimation method (ELE-M1) in 7.2.1.3.2.2/G.9… |
| 1.3.6.1.4.1.2011.6.144.1.1.8.1.21 | ColumnhwVOPUPBOConfProfUpboElmt | read-create | current | This parameter defines the UPBO electrical length minimum threshold percentile in percent used in the Alternative Electrical Length Estimation method (ELE-M1) … |
| 1.3.6.1.4.1.2011.6.144.1.1.8.1.22 | ColumnhwVOPGfastUPBOConfProfUpboKL | read-create | current | This configuration parameter defines the G.fast electrical length expressed in dB at 1MHz, kl0, configured by the DPU-MIB.The value ranges from 0 (coded as 0) … |
| 1.3.6.1.4.1.2011.6.144.1.1.8.1.23 | ColumnhwVOPGfastUPBOConfProfUpboKLF | read-create | current | Defines the G.fast upstream power backoff force mode. |
| 1.3.6.1.4.1.2011.6.144.1.1.8.1.24 | ColumnhwVOPGfastUPBOConfProfKlAuto | read-create | current | This parameter defines the mode in which kl0 is computed when hwVOPGfastUPBOConfProfUpboKLF is auto. Options: 1 2 3 4 |
| 1.3.6.1.4.1.2011.6.144.1.1.8.1.25 | ColumnhwVOPGfastUPBOConfProfPsdA | read-create | current | This configuration parameter defines the 'a' reference parameter of the UPBO reference PSD used to compute the upstream power back-off.A UPBOPSD shall consist … |
| 1.3.6.1.4.1.2011.6.144.1.1.8.1.26 | ColumnhwVOPGfastUPBOConfProfPsdB | read-create | current | This configuration parameter defines the 'b' reference parameter of the UPBO reference PSD used to compute the upstream power back-off.A UPBOPSD shall consist … |
| 1.3.6.1.4.1.2011.6.144.1.1.8.1.27 | ColumnhwVOPGfastUPBOConfProfUpboKLREF | read-create | current | This parameter defines the UPBO reference electrical length used to compute the upstream power back-off, for the optional Equalized FEXT UPBO method. The value… |
| 1.3.6.1.4.1.2011.6.144.1.1.9 | ScalarhwVOPDPBOProfileIndexNext | read-only | current | This object contains an appropriate value to be used for hwVOPDPBOConfProfIndex when creating entries in the hwVOPDPBOConfProfTable. The value '0' indicates th… |
| 1.3.6.1.4.1.2011.6.144.1.1.10 | TablehwVOPDPBOConfProfTable | not-accessible | current | The table hwVOPDPBOConfProfTable contains all the parameters related to downstream power back-off. Entries in this table MUST be maintained in a persistent man… |
| 1.3.6.1.4.1.2011.6.144.1.1.10.1 | RowhwVOPDPBOConfProfEntry | not-accessible | current | The table hwVOPDPBOConfProfTable contains all the parameters related to downstream power back-off. Entries in this table MUST be maintained in a persistent man… |
| 1.3.6.1.4.1.2011.6.144.1.1.10.1.1 | ColumnhwVOPDPBOConfProfIndex | accessible-for-notify | current | The hwVOPDPBOConfProfIndex identifies a row in the hwVOPDPBOConfProfTable. |
| 1.3.6.1.4.1.2011.6.144.1.1.10.1.2 | ColumnhwVOPDPBOConfProfRowStatus | read-create | current | This object is used to create a new row or to modify or delete an existing row in this table. A profile is activated by setting this object to 'active'. Before… |
| 1.3.6.1.4.1.2011.6.144.1.1.10.1.3 | ColumnhwVOPDPBOConfProfProfDescription | read-create | current | The hwVOPDPBOConfProfProfDescription contains an optional human readable description for the profile. |
| 1.3.6.1.4.1.2011.6.144.1.1.10.1.4 | ColumnhwVOPDPBOConfProfWkMdMask | read-create | current | This configuration parameter defines the current enabled DPBO working mode mask. DPBO working mode enabling:1-ADSL, 2-ADSL2+ 3-VDSL2. Options : 1 2 3 4 5 6 7 |
| 1.3.6.1.4.1.2011.6.144.1.1.10.1.5 | ColumnhwVOPDPBOConfProfEsEL | read-create | current | This configuration parameter defines the assumed electrical length of cables (E-side cables) connecting exchange based DSL services to a remote flexibility poi… |
| 1.3.6.1.4.1.2011.6.144.1.1.10.1.6 | ColumnhwVOPDPBOConfProfEselMin | read-create | current | DPBOESELMIN in dB is the minimum of all main cable losses for the KVz supplied when using the SOL model (expansion of a KVz and VDSL2 provision of additional K… |
| 1.3.6.1.4.1.2011.6.144.1.1.10.1.7 | ColumnhwVOPDPBOConfProfEPsd | read-create | current | This configuration parameter defines the PSD mask that is assumed to be permitted at the exchange. This parameter shall use the same format as xdsl2LConfProfPs… |
| 1.3.6.1.4.1.2011.6.144.1.1.10.1.8 | ColumnhwVOPDPBOConfProfCableModelA | read-create | current | The E-side Cable Model parameter A (DPBOESCMA) of the cable model (DPBOESCM) for cables connecting exchange based DSL services to a remote flexibility point (c… |
| 1.3.6.1.4.1.2011.6.144.1.1.10.1.9 | ColumnhwVOPDPBOConfProfCableModelB | read-create | current | The E-side Cable Model parameter B (DPBOESCMB) of the cable model (DPBOESCM) for cables connecting exchange based DSL services to a remote flexibility point (c… |
| 1.3.6.1.4.1.2011.6.144.1.1.10.1.10 | ColumnhwVOPDPBOConfProfCableModelC | read-create | current | The E-side Cable Model parameter C (DPBOESCMC) of the cable model (DPBOESCM) for cables connecting exchange based DSL services to a remote flexibility point (c… |
| 1.3.6.1.4.1.2011.6.144.1.1.10.1.11 | ColumnhwVOPDPBOConfProfMus | read-create | current | This configuration parameter defines the assumed Minimum Usable receive PSD mask (in dBm/Hz) for exchange based services, used to modify parameter xdsl2LConfPr… |
| 1.3.6.1.4.1.2011.6.144.1.1.10.1.12 | ColumnhwVOPDPBOConfProfFMin | read-create | current | This configuration parameter defines the minimum frequency from which the DPBO shall be applied. It ranges from 0 kHz (coded as 0) to 8832 kHz (coded as 2048) … |
| 1.3.6.1.4.1.2011.6.144.1.1.10.1.13 | ColumnhwVOPDPBOConfProfFMax | read-create | current | This configuration parameter defines the maximum frequency at which DPBO may be applied. It ranges from 138 kHz (coded as 32) to 35323.6875 kHz (coded as 8191)… |
| 1.3.6.1.4.1.2011.6.144.1.1.10.1.14 | ColumnhwVOPDPBOConfFEXTFactor | read-create | current | This configuration parameter defines the switch of the delta FEXT-factor. Options: 1. disable(1) - The switch of the delta FEXT-factor is disabled 2. enable(2)… |
| 1.3.6.1.4.1.2011.6.144.1.1.11 | ScalarhwVOPRFIProfileIndexNext | read-only | current | This object contains an appropriate value to be used for hwVOPRFIConfProfIndex when creating entries in the hwVOPRFIConfProfTable. The value '0' indicates that… |
| 1.3.6.1.4.1.2011.6.144.1.1.12 | TablehwVOPRFIConfProfTable | not-accessible | current | RFI notches are necessary only when radio services may be disturbed during operation, therefore this parameter should be separated from all other profiles. Ent… |
| 1.3.6.1.4.1.2011.6.144.1.1.12.1 | RowhwVOPRFIConfProfEntry | not-accessible | current | RFI notches are necessary only when radio services may be disturbed during operation, therefore this parameter should be separated from all other profiles. Ent… |
| 1.3.6.1.4.1.2011.6.144.1.1.12.1.1 | ColumnhwVOPRFIConfProfIndex | accessible-for-notify | current | The hwVOPRFIConfProfIndex identifies a row in the hwVOPRFIConfProfTable. |
| 1.3.6.1.4.1.2011.6.144.1.1.12.1.2 | ColumnhwVOPRFIConfProfRowStatus | read-create | current | This object is used to create a new row or to modify or delete an existing row in this table. A profile is activated by setting this object to 'active'. Before… |
| 1.3.6.1.4.1.2011.6.144.1.1.12.1.3 | ColumnhwVOPRFIConfProfDescription | read-create | current | The hwVOPRFIConfProfDescription contains an optional human readable description for the profile. |
| 1.3.6.1.4.1.2011.6.144.1.1.12.1.4 | ColumnhwVOPRFIConfProfRfiBands | read-create | current | For ADSL2plus operation mode, this configuration parameter defines the subset of downstream PSD mask breakpoints, as specified in hwVOPModeSpecificPSDConfProfP… |
| 1.3.6.1.4.1.2011.6.144.1.1.12.1.5 | ColumnhwVOPGfastRFIConfProfRfiBands | read-create | current | This configuration parameter defines the bands where the PSD shall be reduced as specified in ITU-T G.9701 #7.3.1.2. Each band shall be represented by a start … |
| 1.3.6.1.4.1.2011.6.144.1.1.12.1.6 | ColumnhwVOPGfastRFIConfProfIarBands | read-create | current | Defines for each International Amateur Radio (IAR) band whether transmit PSD reduction is enabled or disabled in that band. It is represented as a bitmap (0 if… |
| 1.3.6.1.4.1.2011.6.144.1.1.13 | ScalarhwVOPSNRMarginProfileIndexNext | read-only | current | This object contains an appropriate value to be used for hwVOPSNRMarginConfProfIndex when creating entries in the hwVOPSNRMarginConfProfTable. The value '0' in… |
| 1.3.6.1.4.1.2011.6.144.1.1.14 | TablehwVOPSNRMarginConfProfTable | not-accessible | current | Noise margins are important for line robustness and need to be configured independently from other spectrum related parameters to reduce the amount of combinat… |
| 1.3.6.1.4.1.2011.6.144.1.1.14.1 | RowhwVOPSNRMarginConfProfEntry | not-accessible | current | Noise margins are important for line robustness and need to be configured independently from other spectrum related parameters to reduce the amount of combinat… |
| 1.3.6.1.4.1.2011.6.144.1.1.14.1.1 | ColumnhwVOPSNRMarginConfProfIndex | accessible-for-notify | current | The hwVOPSNRMarginConfProfIndex identifies a row in the hwVOPSNRMarginConfProfTable. |
| 1.3.6.1.4.1.2011.6.144.1.1.14.1.2 | ColumnhwVOPSNRMarginConfProfRowStatus | read-create | current | This object is used to create a new row or to modify or delete an existing row in this table. A profile is activated by setting this object to 'active'. Before… |
| 1.3.6.1.4.1.2011.6.144.1.1.14.1.3 | ColumnhwVOPSNRMarginConfProfDescription | read-create | current | The hwVOPSNRMarginConfProfDescription contains an optional human readable description for the profile. |
| 1.3.6.1.4.1.2011.6.144.1.1.14.1.4 | ColumnhwVOPSNRMarginConfProfMinSnrmDs | read-create | current | The minimum Noise Margin the xTU-R receiver shall tolerate. If the noise margin falls below this level, the xTU-R shall request that the xTU-C increase the xTU… |
| 1.3.6.1.4.1.2011.6.144.1.1.14.1.5 | ColumnhwVOPSNRMarginConfProfMinSnrmUs | read-create | current | The minimum Noise Margin the xTU-C receiver shall tolerate. If the noise margin falls below this level, the xTU-C shall request that the xTU-R increase the xTU… |
| 1.3.6.1.4.1.2011.6.144.1.1.14.1.6 | ColumnhwVOPSNRMarginConfProfTargetSnrmDs | read-create | current | The minimum Noise Margin the xTU-R receiver shall achieve, relative to the BER requirement for each of the downstream bearer channels, to successfully complete… |
| 1.3.6.1.4.1.2011.6.144.1.1.14.1.7 | ColumnhwVOPSNRMarginConfProfTargetSnrmUs | read-create | current | The minimum Noise Margin the xTU-C receiver shall achieve, relative to the BER requirement for each of the upstream bearer channels, to successfully complete i… |
| 1.3.6.1.4.1.2011.6.144.1.1.14.1.8 | ColumnhwVOPSNRMarginConfProfMaxSnrmDs | read-create | current | The maximum Noise Margin the xTU-R receiver shall try to sustain. If the Noise Margin is above this level, the xTU-R shall request that the xTU-C reduce the xT… |
| 1.3.6.1.4.1.2011.6.144.1.1.14.1.9 | ColumnhwVOPSNRMarginConfProfMaxSnrmUs | read-create | current | The maximum Noise Margin the xTU-C receiver shall try to sustain. If the Noise Margin is above this level, the xTU-C shall request that the xTU-R reduce the xT… |
| 1.3.6.1.4.1.2011.6.144.1.1.14.1.10 | ColumnhwVOPSNRMarginConfProfSnrModeDs | read-create | current | This parameter enables the transmitter referred virtual noise in the downstream direction. The configuration parameters for virtual noise are in the hwVOPVirtu… |
| 1.3.6.1.4.1.2011.6.144.1.1.14.1.11 | ColumnhwVOPSNRMarginConfProfSnrModeUs | read-create | current | This parameter enables the transmitter referred virtual noise in the upstream direction. The configuration parameters for virtual noise are in the hwVOPVirtual… |
| 1.3.6.1.4.1.2011.6.144.1.1.14.1.12 | ColumnhwVOPSNRMarginConfProfRaModeDs | read-create | current | The mode of operation of a rate-adaptive xTU-C in the transmit direction. |
| 1.3.6.1.4.1.2011.6.144.1.1.14.1.13 | ColumnhwVOPSNRMarginConfProfRaModeUs | read-create | current | The mode of operation of a rate-adaptive xTU-R in the transmit direction. |
| 1.3.6.1.4.1.2011.6.144.1.1.14.1.14 | ColumnhwVOPSNRMarginConfProfRaUsNrmDs | read-create | current | The Downstream Up-Shift Noise Margin value, to be used when hwVOPSNRMarginConfProfRaModeDs is set to dynamicRa. If the downstream noise margin is above this va… |
| 1.3.6.1.4.1.2011.6.144.1.1.14.1.15 | ColumnhwVOPSNRMarginConfProfRaUsNrmUs | read-create | current | The Upstream Up-Shift Noise Margin value, to be used when hwVOPSNRMarginConfProfRaModeUs is set to dynamicRa. If the upstream noise margin is above this value,… |
| 1.3.6.1.4.1.2011.6.144.1.1.14.1.16 | ColumnhwVOPSNRMarginConfProfRaDsNrmDs | read-create | current | The Downstream Down-Shift Noise Margin value, to be used when hwVOPSNRMarginConfProfRaModeDs is set to dynamicRa. If the downstream noise margin is below this … |
| 1.3.6.1.4.1.2011.6.144.1.1.14.1.17 | ColumnhwVOPSNRMarginConfProfRaDsNrmUs | read-create | current | The Upstream Down-Shift Noise Margin value, to be used when hwVOPSNRMarginConfProfRaModeUs is set to dynamicRa. If the upstream noise margin is below this valu… |
| 1.3.6.1.4.1.2011.6.144.1.1.14.1.18 | ColumnhwVOPSNRMarginConfProfUsTimeDs | read-create | current | The Downstream Up-Shift Time Interval, to be used when hwVOPSNRMarginConfProfRaModeDs is set to dynamicRa. The interval of time that the downstream noise margi… |
| 1.3.6.1.4.1.2011.6.144.1.1.14.1.19 | ColumnhwVOPSNRMarginConfProfUsTimeUs | read-create | current | The Upstream Up-Shift Time Interval, to be used when hwVOPSNRMarginConfProfRaModeUs is set to dynamicRa. The interval of time the upstream noise margin should … |
| 1.3.6.1.4.1.2011.6.144.1.1.14.1.20 | ColumnhwVOPSNRMarginConfProfDsTimeDs | read-create | current | The Downstream Downshift Time Interval, to be used when hwVOPSNRMarginConfProfRaModeDs is set to dynamicRa. The interval of time the downstream noise margin sh… |
| 1.3.6.1.4.1.2011.6.144.1.1.14.1.21 | ColumnhwVOPSNRMarginConfProfDsTimeUs | read-create | current | The Upstream Down-Shift Time Interval, to be used when hwVOPSNRMarginConfProfUsTimeUs is set to dynamicRa. The interval of time the upstream noise margin shoul… |
| 1.3.6.1.4.1.2011.6.144.1.1.14.1.22 | ColumnhwVOPGfastSNRMarginConfProfMinSnrmDs | read-create | current | The G.fast minimum Noise Margin the xTU-R receiver shall tolerate. If the noise margin falls below this level, the xTU-R shall request that the xTU-C increase … |
| 1.3.6.1.4.1.2011.6.144.1.1.14.1.23 | ColumnhwVOPGfastSNRMarginConfProfMinSnrmUs | read-create | current | The G.fast minimum Noise Margin the xTU-C receiver shall tolerate. If the noise margin falls below this level, the xTU-C shall request that the xTU-R increase … |
| 1.3.6.1.4.1.2011.6.144.1.1.14.1.24 | ColumnhwVOPGfastSNRMarginConfProfTargetSnrmDs | read-create | current | The G.fast minimum Noise Margin the xTU-R receiver shall achieve, relative to the BER requirement, to successfully complete initialization. The target noise ma… |
| 1.3.6.1.4.1.2011.6.144.1.1.14.1.25 | ColumnhwVOPGfastSNRMarginConfProfTargetSnrmUs | read-create | current | The G.fast minimum Noise Margin the xTU-C receiver shall achieve, relative to the BER requirement, to successfully complete initialization. The target noise ma… |
| 1.3.6.1.4.1.2011.6.144.1.1.14.1.26 | ColumnhwVOPGfastSNRMarginConfProfMaxSnrmDs | read-create | current | The G.fast maximum Noise Margin the xTU-R receiver shall try to sustain. If the Noise Margin is above this level, the xTU-R shall request that the xTU-C reduce… |
| 1.3.6.1.4.1.2011.6.144.1.1.14.1.27 | ColumnhwVOPGfastSNRMarginConfProfMaxSnrmUs | read-create | current | The G.fast maximum Noise Margin the xTU-C receiver shall try to sustain. If the Noise Margin is above this level, the xTU-C shall request that the xTU-R reduce… |
| 1.3.6.1.4.1.2011.6.144.1.1.14.1.28 | ColumnhwVOPGfastSNRMarginConfProfSnrModeDs | read-create | obsolete | This parameter enables the G.fast transmitter referred virtual noise in the downstream direction. The configuration parameters for virtual noise are in the hwV… |
| 1.3.6.1.4.1.2011.6.144.1.1.14.1.29 | ColumnhwVOPGfastSNRMarginConfProfSnrModeUs | read-create | obsolete | This parameter enables the G.fast transmitter referred virtual noise in the upstream direction. The configuration parameters for virtual noise are in the hwVOP… |
| 1.3.6.1.4.1.2011.6.144.1.1.14.1.30 | ColumnhwVOPGfastSNRMarginConfProfRaModeDs | read-create | obsolete | The mode of operation of a rate-adaptive xTU-C in the transmit direction. Options: 1. manual (1) - No Rate-Adaptation. The initialization process attempts to s… |
| 1.3.6.1.4.1.2011.6.144.1.1.14.1.31 | ColumnhwVOPGfastSNRMarginConfProfRaModeUs | read-create | obsolete | The mode of operation of a rate-adaptive xTU-R in the transmit direction. Options: 1. manual (1) - No Rate-Adaptation. The initialization process attempts to s… |
| 1.3.6.1.4.1.2011.6.144.1.1.14.1.32 | ColumnhwVOPGfastSNRMarginConfProfRaUsNrmDs | read-create | current | The G.fast Downstream Up-Shift Noise Margin value, to be used when hwVOPGfastSNRMarginConfProfRaModeDs is set to dynamicRa. If the downstream noise margin is a… |
| 1.3.6.1.4.1.2011.6.144.1.1.14.1.33 | ColumnhwVOPGfastSNRMarginConfProfRaUsNrmUs | read-create | current | The G.fast Upstream Up-Shift Noise Margin value, to be used when hwVOPGfastSNRMarginConfProfRaModeUs is set to dynamicRa. If the upstream noise margin is above… |
| 1.3.6.1.4.1.2011.6.144.1.1.14.1.34 | ColumnhwVOPGfastSNRMarginConfProfRaDsNrmDs | read-create | current | The G.fast Downstream Down-Shift Noise Margin value, to be used when hwVOPGfastSNRMarginConfProfRaModeDs is set to dynamicRa. If the downstream noise margin is… |
| 1.3.6.1.4.1.2011.6.144.1.1.14.1.35 | ColumnhwVOPGfastSNRMarginConfProfRaDsNrmUs | read-create | current | The G.fast Upstream Down-Shift Noise Margin value, to be used when hwVOPGfastSNRMarginConfProfRaModeUs is set to dynamicRa. If the upstream noise margin is bel… |
| 1.3.6.1.4.1.2011.6.144.1.1.14.1.36 | ColumnhwVOPGfastSNRMarginConfProfUsTimeDs | read-create | current | The G.fast Downstream Up-Shift Time Interval, to be used when hwVOPGfastSNRMarginConfProfRaModeDs is set to dynamicRa. The interval of time that the downstream… |
| 1.3.6.1.4.1.2011.6.144.1.1.14.1.37 | ColumnhwVOPGfastSNRMarginConfProfUsTimeUs | read-create | current | The G.fast Upstream Up-Shift Time Interval, to be used when hwVOPGfastSNRMarginConfProfRaModeUs is set to dynamicRa. The interval of time the upstream noise ma… |
| 1.3.6.1.4.1.2011.6.144.1.1.14.1.38 | ColumnhwVOPGfastSNRMarginConfProfDsTimeDs | read-create | current | The G.fast Downstream Downshift Time Interval, to be used when hwVOPGfastSNRMarginConfProfRaModeDs is set to dynamicRa. The interval of time the downstream noi… |
| 1.3.6.1.4.1.2011.6.144.1.1.14.1.39 | ColumnhwVOPGfastSNRMarginConfProfDsTimeUs | read-create | current | The Upstream Down-Shift Time Interval, to be used when hwVOPGfastSNRMarginConfProfRaModeUs is set to dynamicRa. The interval of time the upstream noise margin … |
| 1.3.6.1.4.1.2011.6.144.1.1.14.1.40 | ColumnhwVOPGfastSNRMarginConfProfTaretSnrmRmcDs | read-create | current | Defines the downstream RMC noise margin that the FTU-R receiver shall achieve, relative to the BER requirement, or better, to successfully complete initializat… |
| 1.3.6.1.4.1.2011.6.144.1.1.14.1.41 | ColumnhwVOPGfastSNRMarginConfProfTaretSnrmRmcUs | read-create | current | Defines the upstream RMC noise margin that the FTU-O receiver shall achieve, relative to the BER requirement, or better, to successfully complete initializatio… |
| 1.3.6.1.4.1.2011.6.144.1.1.14.1.42 | ColumnhwVOPGfastSNRMarginConfProfMinSnrmRmcDs | read-create | current | Defines the downstream minimum noise margin the FTU-R receiver tolerates for the RMC. If the downstream RMC noise margin falls below this level, the FTU-R init… |
| 1.3.6.1.4.1.2011.6.144.1.1.14.1.43 | ColumnhwVOPGfastSNRMarginConfProfMinSnrmRmcUs | read-create | current | Defines the upstream minimum noise margin the FTU-O receiver tolerates for the RMC. If the downstream RMC noise margin falls below this level, the FTU-O initia… |
| 1.3.6.1.4.1.2011.6.144.1.1.14.1.44 | ColumnhwVOPGfastSNRMarginConfProfMaxBLRmcDs | read-create | current | Defines the maximum allowed bit-loading for the downstream RMC sub-carriers. |
| 1.3.6.1.4.1.2011.6.144.1.1.14.1.45 | ColumnhwVOPGfastSNRMarginConfProfMaxBLRmcUs | read-create | current | Defines the maximum allowed bit-loading for the upstream RMC sub-carriers. |
| 1.3.6.1.4.1.2011.6.144.1.1.15 | ScalarhwVOPINPDelayProfileIndexNext | read-only | current | This object contains an appropriate value to be used for hwVOPINPDelayConfProfIndex when creating entries in the hwVOPINPDelayConfProfTableTable. The value '0'… |
| 1.3.6.1.4.1.2011.6.144.1.1.16 | TablehwVOPINPDelayConfProfTable | not-accessible | current | The INP-Delay parameters for each pair of upstream and downstream channels will be in an INP-Delay Profile. To cover all possibilities there will be 4 indices … |
| 1.3.6.1.4.1.2011.6.144.1.1.16.1 | RowhwVOPINPDelayConfProfEntry | not-accessible | current | The INP-Delay parameters for each pair of upstream and downstream channels will be in an INP-Delay Profile. To cover all possibilities there will be 4 indices … |
| 1.3.6.1.4.1.2011.6.144.1.1.16.1.1 | ColumnhwVOPINPDelayConfProfIndex | accessible-for-notify | current | The hwVOPINPDelayConfProfIndex identifies a row in the hwVOPINPDelayConfProfTable. |
| 1.3.6.1.4.1.2011.6.144.1.1.16.1.2 | ColumnhwVOPINPDelayConfProfRowStatus | read-create | current | This object is used to create a new row or to modify or delete an existing row in this table. A profile is activated by setting this object to 'active'. Before… |
| 1.3.6.1.4.1.2011.6.144.1.1.16.1.3 | ColumnhwVOPINPDelayConfProfDescription | read-create | current | The hwVOPINPDelayConfProfDescription contains an optional human readable description for the profile. |
| 1.3.6.1.4.1.2011.6.144.1.1.16.1.4 | ColumnhwVOPINPDelayConfProfMinProtectionDs | read-create | current | If retransmission is not used in downstream direction, this parameter specifies the minimum impulse noise protection for the downstream bearer channel if it is… |
| 1.3.6.1.4.1.2011.6.144.1.1.16.1.5 | ColumnhwVOPINPDelayConfProfMinProtection8Ds | read-create | current | If retransmission is not used in downstream direction, this parameter specifies the minimum impulse noise protection for the downstream bearer channel if it is… |
| 1.3.6.1.4.1.2011.6.144.1.1.16.1.6 | ColumnhwVOPINPDelayConfProfMaxDelayDs | read-create | current | If retransmission is not used in downstream direction, this parameter is the maximum one-way interleaving delay introduced by the PMS-TC on downstream directio… |
| 1.3.6.1.4.1.2011.6.144.1.1.16.1.7 | ColumnhwVOPINPDelayConfProfMinProtectionUs | read-create | current | If retransmission is not used in upstream direction, this parameter specifies the minimum impulse noise protection for the upstream bearer channel if it is tra… |
| 1.3.6.1.4.1.2011.6.144.1.1.16.1.8 | ColumnhwVOPINPDelayConfProfMinProtection8Us | read-create | current | If retransmission is not used in upstream direction, this parameter specifies the minimum impulse noise protection for the upstream bearer channel if it is tra… |
| 1.3.6.1.4.1.2011.6.144.1.1.16.1.9 | ColumnhwVOPINPDelayConfProfMaxDelayUs | read-create | current | If retransmission is not used in upstream direction, this parameter is the maximum one-way interleaving delay introduced by the PMS-TC on upstream direction. T… |
| 1.3.6.1.4.1.2011.6.144.1.1.16.1.10 | ColumnhwVOPINPDelayConfProfMaxDelayVar | read-create | current | This optional VDSL2 specific parameter specifies the maximum value for the delay variation allowed in an OLR procedure. It is ranges from 1 to 254 units of 0.1… |
| 1.3.6.1.4.1.2011.6.144.1.1.16.1.11 | ColumnhwVOPINPDelayConfProfInitPolicy | read-create | current | If retransmission is not used in a given transmit direction, this parameter indicates which policy shall be applied to determine the transceiver configuration … |
| 1.3.6.1.4.1.2011.6.144.1.1.16.1.12 | ColumnhwVOPINPDelayConfProfMaxDelayRtxDs | read-create | current | If retransmission is used in downstream direction, this parameter specifies the maximum for the instantaneous delay due to the effect of retransmission only (s… |
| 1.3.6.1.4.1.2011.6.144.1.1.16.1.13 | ColumnhwVOPINPDelayConfProfMaxDelayRtxUs | read-create | current | If retransmission is used in upstream direction, this parameter specifies the maximum for the instantaneous delay due to the effect of retransmission only (see… |
| 1.3.6.1.4.1.2011.6.144.1.1.16.1.14 | ColumnhwVOPINPDelayConfProfMinDelayRtxDs | read-create | current | If retransmission is used in downstream direction, this parameter specifies the minimum for the instantaneous delay due to the effect of retransmission only (s… |
| 1.3.6.1.4.1.2011.6.144.1.1.16.1.15 | ColumnhwVOPINPDelayConfProfMinDelayRtxUs | read-create | current | If retransmission is used in upstream direction, this parameter specifies the minimum for the instantaneous delay due to the effect of retransmission only (see… |
| 1.3.6.1.4.1.2011.6.144.1.1.16.1.16 | ColumnhwVOPINPDelayConfProfMinInpShineRtxDs | read-create | current | If retransmission is used in downstream direction, this parameter specifies the minimum impulse noise protection against SHINE for the bearer channel if it is … |
| 1.3.6.1.4.1.2011.6.144.1.1.16.1.17 | ColumnhwVOPINPDelayConfProfMinInpShineRtxUs | read-create | current | If retransmission is used in upstream direction, this parameter specifies the minimum impulse noise protection against SHINE for the bearer channel if it is tr… |
| 1.3.6.1.4.1.2011.6.144.1.1.16.1.18 | ColumnhwVOPINPDelayConfProfMinInp8ShineRtxDs | read-create | current | If retransmission is used in downstream direction, this parameter specifies the minimum impulse noise protection against SHINE for the bearer channel if it is … |
| 1.3.6.1.4.1.2011.6.144.1.1.16.1.19 | ColumnhwVOPINPDelayConfProfMinInp8ShineRtxUs | read-create | current | If retransmission is used in upstream direction, this parameter specifies the minimum impulse noise protection against SHINE for the bearer channel if it is tr… |
| 1.3.6.1.4.1.2011.6.144.1.1.16.1.20 | ColumnhwVOPINPDelayConfProfShineRatioRtxDs | read-create | current | If retransmission is used in downstream direction, this parameter specifies the SHINE ratio (detailed definition see G.998.4). The values range from 0 to 0.100… |
| 1.3.6.1.4.1.2011.6.144.1.1.16.1.21 | ColumnhwVOPINPDelayConfProfShineRatioRtxUs | read-create | current | If retransmission is used in upstream direction, this parameter specifies the SHINE ratio (detailed definition see G.998.4). The values range from 0 to 0.100 i… |
| 1.3.6.1.4.1.2011.6.144.1.1.16.1.22 | ColumnhwVOPINPDelayConfProfMinInpReinRtxDs | read-create | current | If retransmission is used in downstream direction, this parameter specifies the minimum impulse noise protection against REIN for the bearer channel if it is t… |
| 1.3.6.1.4.1.2011.6.144.1.1.16.1.23 | ColumnhwVOPINPDelayConfProfMinInpReinRtxUs | read-create | current | If retransmission is used in upstream direction, this parameter specifies the minimum impulse noise protection against REIN for the bearer channel if it is tra… |
| 1.3.6.1.4.1.2011.6.144.1.1.16.1.24 | ColumnhwVOPINPDelayConfProfMinInp8ReinRtxDs | read-create | current | If retransmission is used in downstream direction, this parameter specifies the minimum impulse noise protection against REIN for the bearer channel if it is t… |
| 1.3.6.1.4.1.2011.6.144.1.1.16.1.25 | ColumnhwVOPINPDelayConfProfMinInp8ReinRtxUs | read-create | current | If retransmission is used in upstream direction, this parameter specifies the minimum impulse noise protection against REIN for the bearer channel if it is tra… |
| 1.3.6.1.4.1.2011.6.144.1.1.16.1.26 | ColumnhwVOPINPDelayConfProfIatReinRtxDs | read-create | current | If retransmission is used in downstream direction, this parameter specifies the inter-arrival time that shall be assumed for REIN protection. Options: 1. frequ… |
| 1.3.6.1.4.1.2011.6.144.1.1.16.1.27 | ColumnhwVOPINPDelayConfProfIatReinRtxUs | read-create | current | If retransmission is used in upstream direction, this parameter specifies the inter-arrival time that shall be assumed for REIN protection. Options: 1. frequen… |
| 1.3.6.1.4.1.2011.6.144.1.1.16.1.28 | ColumnhwVOPINPDelayConfProfMaxDelayOctetSplit | read-create | current | The line configuration parameter MAXDELAYOCTET-split (MDOSPLIT) defines the percentage of the MAXDELAYOCTET_ext if operating in ITU-T G.998.4 or MAXDELAYOCTET … |
| 1.3.6.1.4.1.2011.6.144.1.1.16.1.29 | ColumnhwVOPGfastINPDelayConfProfMaxDelayRtxDs | read-create | current | This parameter specifies the G.fast downstream maximum allowed delay for retransmission. The delay values range from 1 to 63 ms in steps of 0.25 ms. Unit: 0.25… |
| 1.3.6.1.4.1.2011.6.144.1.1.16.1.30 | ColumnhwVOPGfastINPDelayConfProfMaxDelayRtxUs | read-create | current | This parameter specifies the G.fast upstream maximum allowed delay for retransmission. The delay values range from 1 to 63 ms in steps of 0.25 ms. Unit: 0.25 m… |
| 1.3.6.1.4.1.2011.6.144.1.1.16.1.31 | ColumnhwVOPGfastINPDelayConfProfMinInpShineRtxDs | read-create | current | This parameter specifies the G.fast downstream minimum impulse noise protection against SHINE for the bearer channel if it is transported over DMT symbols with… |
| 1.3.6.1.4.1.2011.6.144.1.1.16.1.32 | ColumnhwVOPGfastINPDelayConfProfMinInpShineRtxUs | read-create | current | This parameter specifies the G.fast upstream minimum impulse noise protection against SHINE for the bearer channel if it is transported over DMT symbols with a… |
| 1.3.6.1.4.1.2011.6.144.1.1.16.1.33 | ColumnhwVOPGfastINPDelayConfProfShineRatioRtxDs | read-create | current | This parameter specifies the G.fast downstream SHINE ratio. The values range from 0 to 0.1 in increments of 0.001. |
| 1.3.6.1.4.1.2011.6.144.1.1.16.1.34 | ColumnhwVOPGfastINPDelayConfProfShineRatioRtxUs | read-create | current | This parameter specifies the G.fast upstream SHINE ratio. The values range from 0 to 0.1 in increments of 0.001. |
| 1.3.6.1.4.1.2011.6.144.1.1.16.1.35 | ColumnhwVOPGfastINPDelayConfProfMinInpReinRtxDs | read-create | current | This parameter specifies the G.fast downstream minimum impulse noise protection against REIN for the bearer channel if it is transported over DMT symbols with … |
| 1.3.6.1.4.1.2011.6.144.1.1.16.1.36 | ColumnhwVOPGfastINPDelayConfProfMinInpReinRtxUs | read-create | current | This parameter specifies the G.fast upstream minimum impulse noise protection against REIN for the bearer channel if it is transported over DMT symbols with a … |
| 1.3.6.1.4.1.2011.6.144.1.1.16.1.37 | ColumnhwVOPGfastINPDelayConfProfIatReinRtxDs | read-create | current | This parameter specifies the G.fast downstream inter-arrival time that shall be assumed for REIN protection. Options: 1. frequency100Hz(0) - an inter-arrival t… |
| 1.3.6.1.4.1.2011.6.144.1.1.16.1.38 | ColumnhwVOPGfastINPDelayConfProfIatReinRtxUs | read-create | current | This parameter specifies the G.fast upstream inter-arrival time that shall be assumed for REIN protection. Options: 1. frequency100Hz(0) - an inter-arrival tim… |
| 1.3.6.1.4.1.2011.6.144.1.1.16.1.39 | ColumnhwVOPGfastINPDelayConfProfMinRNRatioRtxDs | read-create | current | This parameter specifies the G.fast downstream minimum Reed-Solomon RFEC/NFEC ratio. The ratio is computed as the number of redundancy bytes (RFEC) divided by … |
| 1.3.6.1.4.1.2011.6.144.1.1.16.1.40 | ColumnhwVOPGfastINPDelayConfProfMinRNRatioRtxUs | read-create | current | This parameter specifies the G.fast upstream minimum Reed-Solomon RFEC/NFEC ratio. The ratio is computed as the number of redundancy bytes (RFEC) divided by th… |
| 1.3.6.1.4.1.2011.6.144.1.1.17 | ScalarhwVOPVirtualNoiseProfileIndexNext | read-only | current | This object contains an appropriate value to be used for hwVOPVirtualNoiseConfProfIndex when creating entries in the hwVOPVirtualNoiseConfProfTable. The value … |
| 1.3.6.1.4.1.2011.6.144.1.1.18 | TablehwVOPVirtualNoiseConfProfTable | not-accessible | current | The Virtual Noise Profile MUST contain the virtual noise PSDs. A Virtual Noise PSD is not used if the corresponding SNRMODE parameters (hwVOPSNRMarginConfProfM… |
| 1.3.6.1.4.1.2011.6.144.1.1.18.1 | RowhwVOPVirtualNoiseConfProfEntry | not-accessible | current | The Virtual Noise Profile MUST contain the virtual noise PSDs. A Virtual Noise PSD is not used if the corresponding SNRMODE parameters (hwVOPSNRMarginConfProfM… |
| 1.3.6.1.4.1.2011.6.144.1.1.18.1.1 | ColumnhwVOPVirtualNoiseConfProfIndex | accessible-for-notify | current | The hwVOPVirtualNoiseConfProfIndex identifies a row in the hwVOPVirtualNoiseConfProfTable. |
| 1.3.6.1.4.1.2011.6.144.1.1.18.1.2 | ColumnhwVOPVirtualNoiseConfProfRowStatus | read-create | current | This object is used to create a new row or to modify or delete an existing row in this table. A profile is activated by setting this object to 'active'. Before… |
| 1.3.6.1.4.1.2011.6.144.1.1.18.1.3 | ColumnhwVOPVirtualNoiseConfProfDescription | read-create | current | The hwVOPVirtualNoiseConfProfDescription contains an optional human readable description for the profile. |
| 1.3.6.1.4.1.2011.6.144.1.1.18.1.4 | ColumnhwVOPVirtualNoiseConfProfTxRefVnDs | read-create | current | This configuration parameter defines the downstream transmitter referred virtual noise. The TXREFVNds shall be specified through a set of breakpoints. Each bre… |
| 1.3.6.1.4.1.2011.6.144.1.1.18.1.5 | ColumnhwVOPVirtualNoiseConfProfTxRefVnUs | read-create | current | This configuration parameter defines the upstream transmitter referred virtual noise. The TXREFVNus shall be specified through a set of breakpoints. Each break… |
| 1.3.6.1.4.1.2011.6.144.1.1.19 | ScalarhwVOPINMProfileIndexNext | read-only | current | This object contains an appropriate value to be used for hwVOPINMConfProfIndex when creating entries in the hwVOPINMConfProfTable. The value '0' indicates that… |
| 1.3.6.1.4.1.2011.6.144.1.1.20 | TablehwVOPINMConfProfTable | not-accessible | current | Impulse Noise Monitoring(INM) is not required for modem operation but is a capability for the measurement of Impulse Noise. The INM Profile includes the option… |
| 1.3.6.1.4.1.2011.6.144.1.1.20.1 | RowhwVOPINMConfProfEntry | not-accessible | current | Impulse Noise Monitoring(INM) is not required for modem operation but is a capability for the measurement of Impulse Noise. The INM Profile includes the option… |
| 1.3.6.1.4.1.2011.6.144.1.1.20.1.1 | ColumnhwVOPINMConfProfIndex | accessible-for-notify | current | The hwVOPINMConfProfIndex identifies a row in the hwVOPINMConfProfTable. |
| 1.3.6.1.4.1.2011.6.144.1.1.20.1.2 | ColumnhwVOPINMConfProfRowStatus | read-create | current | This object is used to create a new row or to modify or delete an existing row in this table. A profile is activated by setting this object to 'active'. Before… |
| 1.3.6.1.4.1.2011.6.144.1.1.20.1.3 | ColumnhwVOPINMConfProfDescription | read-create | current | The hwVOPINMConfProfDescription contains an optional human readable description for the profile. |
| 1.3.6.1.4.1.2011.6.144.1.1.20.1.4 | ColumnhwVOPINMConfProfInmIatoDs | read-create | current | The parameter of downstream impulse noise monitoring inter arrival time offset. This is the Inter Arrival Time Offset that the xTU receiver shall use to determ… |
| 1.3.6.1.4.1.2011.6.144.1.1.20.1.5 | ColumnhwVOPINMConfProfInmIatsDs | read-create | current | The parameter of downstream impulse noise monitoring inter arrival time step. This is the Inter Arrival Time Step that the xTU receiver shall use to determine … |
| 1.3.6.1.4.1.2011.6.144.1.1.20.1.6 | ColumnhwVOPINMConfProfInmCcDs | read-create | current | The parameter of Downstream impulse noise monitoring cluster continuation value. This is the Cluster Continuation value that the xTU receiver shall use in the … |
| 1.3.6.1.4.1.2011.6.144.1.1.20.1.7 | ColumnhwVOPINMConfProfInmInpeqModeDs | read-create | current | The parameter of Downstream impulse noise monitoring equivalent impulse noise protect mode. This is the INM Equivalent INP Mode that the xTU receiver shall use… |
| 1.3.6.1.4.1.2011.6.144.1.1.20.1.8 | ColumnhwVOPINMConfProfInmIatoUs | read-create | current | The parameter of upstream impulse noise monitoring inter arrival time offset. This is the Inter Arrival Time Offset that the xTU receiver shall use to determin… |
| 1.3.6.1.4.1.2011.6.144.1.1.20.1.9 | ColumnhwVOPINMConfProfInmIatsUs | read-create | current | The parameter of upstream impulse noise monitoring inter arrival time step. This is the Inter Arrival Time Step that the xTU receiver shall use to determine in… |
| 1.3.6.1.4.1.2011.6.144.1.1.20.1.10 | ColumnhwVOPINMConfProfInmCcUs | read-create | current | The parameter of upstream impulse noise monitoring cluster continuation value. This is the Cluster Continuation value that the xTU receiver shall use in the cl… |
| 1.3.6.1.4.1.2011.6.144.1.1.20.1.11 | ColumnhwVOPINMConfProfInmInpeqModeUs | read-create | current | The parameter of upstream impulse noise monitoring equivalent impulse noise protect mode. This is the INM Equivalent INP Mode that the xTU receiver shall use i… |
| 1.3.6.1.4.1.2011.6.144.1.1.21 | ScalarhwVOPSosProfileIndexNext | read-only | current | This object contains an appropriate value to be used for hwVOPSosConfProfIndex when creating entries in the hwVOPSosConfProfTable. The value '0' indicates that… |
| 1.3.6.1.4.1.2011.6.144.1.1.22 | TablehwVOPSosConfProfTable | not-accessible | current | Save our Showtime (SOS) provides the receiver with a means to rapidly perform a bit loading reduction in a specified part of the frequency spectrum. This can b… |
| 1.3.6.1.4.1.2011.6.144.1.1.22.1 | RowhwVOPSosConfProfEntry | not-accessible | current | Save our Showtime (SOS) provides the receiver with a means to rapidly perform a bit loading reduction in a specified part of the frequency spectrum. This can b… |
| 1.3.6.1.4.1.2011.6.144.1.1.22.1.1 | ColumnhwVOPSosConfProfIndex | accessible-for-notify | current | The hwVOPSosConfProfIndex identifies a row in the hwVOPSosConfProfTable. |
| 1.3.6.1.4.1.2011.6.144.1.1.22.1.2 | ColumnhwVOPSosConfProfRowStatus | read-create | current | This object is used to create a new row or to modify or delete an existing row in this table. A profile is activated by setting this object to 'active'. Before… |
| 1.3.6.1.4.1.2011.6.144.1.1.22.1.3 | ColumnhwVOPSosConfProfDescription | read-create | current | The hwVOPSosConfProfDescription contains an optional human readable description for the profile. |
| 1.3.6.1.4.1.2011.6.144.1.1.22.1.4 | ColumnhwVOPSosConfProfSosTimeDs | read-create | current | The parameter is used in the specification of the receiver initiated SOS. If the value of this parameter is not zero, the standard SOS triggering criteria are … |
| 1.3.6.1.4.1.2011.6.144.1.1.22.1.5 | ColumnhwVOPSosConfProfSosTimeUs | read-create | current | The parameter is used in the specification of the receiver initiated SOS. If the value of this parameter is not zero, the standard SOS triggering criteria are … |
| 1.3.6.1.4.1.2011.6.144.1.1.22.1.6 | ColumnhwVOPSosConfProfSosNtonesDs | read-create | current | This parameter is defined as the minimum percentage of tones in the downstream MEDLEY SET that must be degraded in order to arm the first sub-condition of the … |
| 1.3.6.1.4.1.2011.6.144.1.1.22.1.7 | ColumnhwVOPSosConfProfSosNtonesUs | read-create | current | This parameter is defined as the minimum percentage of tones in the upstream MEDLEY SET that must be degraded in order to arm the first sub-condition of the st… |
| 1.3.6.1.4.1.2011.6.144.1.1.22.1.8 | ColumnhwVOPSosConfProfSosCrcDs | read-create | current | This parameter is defined as the minimum number of normalized CRC anomalies received in SOS-TIME-ds seconds in order to arm the second sub-condition of the sta… |
| 1.3.6.1.4.1.2011.6.144.1.1.22.1.9 | ColumnhwVOPSosConfProfSosCrcUs | read-create | current | This parameter is defined as the minimum number of normalized CRC anomalies received in SOS-TIME-ds seconds in order to arm the second sub-condition of the sta… |
| 1.3.6.1.4.1.2011.6.144.1.1.22.1.10 | ColumnhwVOPSosConfProfMaxSosDs | read-create | current | This parameter is used in G.993.2 de-activation. If the number of successful SOS procedures in the downstream direction performed within a 120-second interval … |
| 1.3.6.1.4.1.2011.6.144.1.1.22.1.11 | ColumnhwVOPSosConfProfMaxSosUs | read-create | current | This parameter is used in G.993.2 de-activation. If the number of successful SOS procedures in the upstream direction performed within a 120-second interval ex… |
| 1.3.6.1.4.1.2011.6.144.1.1.22.1.12 | ColumnhwVOPSosConfProfSnrmoffsetRocDs | read-create | current | The parameter is defined as the SNR Margin offset for the ROC channel in the downstream direction. The parameter is used in the specification of the Channel In… |
| 1.3.6.1.4.1.2011.6.144.1.1.22.1.13 | ColumnhwVOPSosConfProfSnrmoffsetRocUs | read-create | current | The parameter is defined as the SNR Margin offset for the ROC channel in the upstream direction. The parameter is used in the specification of the Channel Init… |
| 1.3.6.1.4.1.2011.6.144.1.1.22.1.14 | ColumnhwVOPSosConfProfInpminRocDs | read-create | current | This parameter contains the minimum impulse noise protection to apply on the ROC in the downstream direction. The minimum impulse noise protection is an intege… |
| 1.3.6.1.4.1.2011.6.144.1.1.22.1.15 | ColumnhwVOPSosConfProfInpminRocUs | read-create | current | This parameter contains the minimum impulse noise protection to apply on the robust ROC in the upstream direction. The minimum impulse noise protection is an i… |
| 1.3.6.1.4.1.2011.6.144.1.1.22.1.16 | ColumnhwVOPGfastSosConfProfFraTimeDs | read-create | current | The parameter is used in the specification of the receiver initiated FRA. If the value of this parameter is not zero, the standard FRA triggering criteria are … |
| 1.3.6.1.4.1.2011.6.144.1.1.22.1.17 | ColumnhwVOPGfastSosConfProfFraTimeUs | read-create | current | The parameter is used in the specification of the receiver initiated FRA. If the value of this parameter is not zero, the standard FRA triggering criteria are … |
| 1.3.6.1.4.1.2011.6.144.1.1.22.1.18 | ColumnhwVOPGfastSosConfProfFraNtonesDs | read-create | current | This parameter is defined as the minimum percentage of tones that must be degraded in order to arm the first sub-condition of the standard FRA triggering crite… |
| 1.3.6.1.4.1.2011.6.144.1.1.22.1.19 | ColumnhwVOPGfastSosConfProfFraNtonesUs | read-create | current | This parameter is defined as the minimum percentage of tones that must be degraded in order to arm the first sub-condition of the standard FRA triggering crite… |
| 1.3.6.1.4.1.2011.6.144.1.1.22.1.20 | ColumnhwVOPGfastSosConfProfFraMinRtxUcDs | read-create | current | This parameter is defined as minimum number of rtx uc anomalies received throughout a time window equal to FRA-TIME-ds in order to arm the second FRA triggerin… |
| 1.3.6.1.4.1.2011.6.144.1.1.22.1.21 | ColumnhwVOPGfastSosConfProfFraMinRtxUcUs | read-create | current | This parameter is defined as the minimum number of rtx uc anomalies received throughout a time window equal to FRA-TIME-us in order to arm the second FRA trigg… |
| 1.3.6.1.4.1.2011.6.144.1.1.22.1.22 | ColumnhwVOPGfastSosConfProfFraVenDiscDs | read-create | current | Enable or disable vendor discretionary FRA triggering criteria in the downstream direction. Options: 1. disable (1) - Disable vendor discretionary FRA triggeri… |
| 1.3.6.1.4.1.2011.6.144.1.1.22.1.23 | ColumnhwVOPGfastSosConfProfFraVenDiscUs | read-create | current | Enable or disable vendor discretionary FRA triggering criteria in the upstream direction. Options: 1. disable (1) - Disable vendor discretionary FRA triggering… |
| 1.3.6.1.4.1.2011.6.144.1.2 | NodehwVOPVectors | |||
| 1.3.6.1.4.1.2011.6.144.1.2.1 | NodehwVOPGlobal | |||
| 1.3.6.1.4.1.2011.6.144.1.2.1.1 | ScalarhwVOPGlobalAttachmentMethodCapabilties | read-only | current | This object reflects the VoP attachment-method(s) this Network Element supports. Two attachment methods, 'direct' and 'indirect' are available and each Network… |
| 1.3.6.1.4.1.2011.6.144.1.2.1.2 | ScalarhwVOPGlobalAttachmentMethodConfigured | read-write | current | This object configures the VoP attachment-method to be used by this Network Element. Two attachment methods, 'direct' and 'indirect' are available and only one… |
| 1.3.6.1.4.1.2011.6.144.1.2.1.3 | ScalarhwVOPGlobalAttachmentMethodCurrent | read-only | current | This object reflects the VoP attachment-method currently used by this Network Element. Two attachment methods, 'direct' and 'indirect' are available and only o… |
| 1.3.6.1.4.1.2011.6.144.1.2.2 | NodehwVOPSetup | |||
| 1.3.6.1.4.1.2011.6.144.1.2.2.1 | ScalarhwVOPSetupProfileIndexNext | read-only | current | This object is required only in case the 'indirect' attachment-method of VoP to xDSL lines is implemented, in which case entries/rows in hwVOPSetupTable are dy… |
| 1.3.6.1.4.1.2011.6.144.1.2.2.2 | TablehwVOPSetupTable | not-accessible | current | This table contains a collection of profile indices that construct a Vector Of Profiles (VoP). This table is used in both 'direct' and 'indirect' attachment-me… |
| 1.3.6.1.4.1.2011.6.144.1.2.2.2.1 | RowhwVOPSetupEntry | not-accessible | current | This table contains a collection of profile indices that construct a Vector Of Profiles (VoP). This table is used in both 'direct' and 'indirect' attachment-me… |
| 1.3.6.1.4.1.2011.6.144.1.2.2.2.1.1 | ColumnhwVOPSetupIndex | not-accessible | current | The hwVOPSetupIndex identifies a row in the hwVOPSetupTable. A row in this table may be indexed either by an ifIndex pattern, in case the 'direct' attachment-m… |
| 1.3.6.1.4.1.2011.6.144.1.2.2.2.1.2 | ColumnhwVOPSetupRowStatus | read-create | current | This object is used, in case the 'indirect' attachment-method of VoP to xDSL lines is implemented, to create a new row, to modify a row, or delete an existing … |
| 1.3.6.1.4.1.2011.6.144.1.2.2.2.1.3 | ColumnhwVOPSetupDescription | read-create | current | The hwVOPSetupDescription contains an optional human readable description for the profile. This object is more likely to be used in case the 'indirect' attachm… |
| 1.3.6.1.4.1.2011.6.144.1.2.2.2.1.4 | ColumnhwVOPSetupUsDataRateProfId1 | read-create | current | This object identifies a row in hwVOPDataRateConfProfTable used for configuring the upstream transmission direction of channel #1. This object has read-write a… |
| 1.3.6.1.4.1.2011.6.144.1.2.2.2.1.5 | ColumnhwVOPSetupUsRaRatio1 | read-create | current | Rate Adaptation Ratio. The ratio (in %) that should be taken into account for the bearer channel #1 when performing rate adaptation on upstream. The ratio refe… |
| 1.3.6.1.4.1.2011.6.144.1.2.2.2.1.6 | ColumnhwVOPSetupDsDataRateProfId1 | read-create | current | This object identifies a row in hwVOPDataRateConfProfTable used for configuring the downstream transmission direction of channel #1. This object has read-write… |
| 1.3.6.1.4.1.2011.6.144.1.2.2.2.1.7 | ColumnhwVOPSetupDsRaRatio1 | read-create | current | Rate Adaptation Ratio. The ratio (in %) that should be taken into account for the bearer channel #1 when performing rate adaptation on downstream. The ratio re… |
| 1.3.6.1.4.1.2011.6.144.1.2.2.2.1.8 | ColumnhwVOPSetupInpDelayProfId1 | read-create | current | This object identifies a row in hwVOPINPDelayConfProfTable used for configuring the INP-Delay parameters of channel #1. This object has read-write accessibilit… |
| 1.3.6.1.4.1.2011.6.144.1.2.2.2.1.9 | ColumnhwVOPSetupUsDataRateProfId2 | read-create | current | This object identifies a row in hwVOPDataRateConfProfTable used for configuring the upstream transmission direction of channel #2. If channel #2 is not being u… |
| 1.3.6.1.4.1.2011.6.144.1.2.2.2.1.10 | ColumnhwVOPSetupUsRaRatio2 | read-create | current | Rate Adaptation Ratio. The ratio (in %) that should be taken into account for the bearer channel #2 when performing rate adaptation on upstream. The ratio refe… |
| 1.3.6.1.4.1.2011.6.144.1.2.2.2.1.11 | ColumnhwVOPSetupDsDataRateProfId2 | read-create | current | This object identifies a row in hwVOPDataRateConfProfTable used for configuring the downstream transmission direction of channel #2. If channel #2 is not being… |
| 1.3.6.1.4.1.2011.6.144.1.2.2.2.1.12 | ColumnhwVOPSetupDsRaRatio2 | read-create | current | Rate Adaptation Ratio. The ratio (in %) that should be taken into account for the bearer channel #2 when performing rate adaptation on downstream. The ratio re… |
| 1.3.6.1.4.1.2011.6.144.1.2.2.2.1.13 | ColumnhwVOPSetupInpDelayProfId2 | read-create | current | This object identifies a row in hwVOPINPDelayConfProfTable used for configuring the INP-Delay parameters of channel #2. If channel #2 is not being used this ob… |
| 1.3.6.1.4.1.2011.6.144.1.2.2.2.1.14 | ColumnhwVOPSetupUsDataRateProfId3 | read-create | current | This object identifies a row in hwVOPDataRateConfProfTable used for configuring the upstream transmission direction of channel #3. If channel #3 is not being u… |
| 1.3.6.1.4.1.2011.6.144.1.2.2.2.1.15 | ColumnhwVOPSetupUsRaRatio3 | read-create | current | Rate Adaptation Ratio. The ratio (in %) that should be taken into account for the bearer channel #3 when performing rate adaptation on upstream. The ratio refe… |
| 1.3.6.1.4.1.2011.6.144.1.2.2.2.1.16 | ColumnhwVOPSetupDsDataRateProfId3 | read-create | current | This object identifies a row in hwVOPDataRateConfProfTable used for configuring the downstream transmission direction of channel #3. If channel #3 is not being… |
| 1.3.6.1.4.1.2011.6.144.1.2.2.2.1.17 | ColumnhwVOPSetupDsRaRatio3 | read-create | current | Rate Adaptation Ratio. The ratio (in %) that should be taken into account for the bearer channel #3 when performing rate adaptation on downstream. The ratio re… |
| 1.3.6.1.4.1.2011.6.144.1.2.2.2.1.18 | ColumnhwVOPSetupInpDelayProfId3 | read-create | current | This object identifies a row in hwVOPINPDelayConfProfTable used for configuring the INP-Delay parameters of channel #3. If channel #3 is not being used this ob… |
| 1.3.6.1.4.1.2011.6.144.1.2.2.2.1.19 | ColumnhwVOPSetupUsDataRateProfId4 | read-create | current | This object identifies a row in hwVOPDataRateConfProfTable used for configuring the upstream transmission direction of channel #4. If channel #4 is not being u… |
| 1.3.6.1.4.1.2011.6.144.1.2.2.2.1.20 | ColumnhwVOPSetupUsRaRatio4 | read-create | current | Rate Adaptation Ratio. The ratio (in %) that should be taken into account for the bearer channel #4 when performing rate adaptation on upstream. The ratio refe… |
| 1.3.6.1.4.1.2011.6.144.1.2.2.2.1.21 | ColumnhwVOPSetupDsDataRateProfId4 | read-create | current | This object identifies a row in hwVOPDataRateConfProfTable used for configuring the downstream transmission direction of channel #4. If channel #4 is not being… |
| 1.3.6.1.4.1.2011.6.144.1.2.2.2.1.22 | ColumnhwVOPSetupDsRaRatio4 | read-create | current | Rate Adaptation Ratio. The ratio (in %) that should be taken into account for the bearer channel #4 when performing rate adaptation on downstream. The ratio re… |
| 1.3.6.1.4.1.2011.6.144.1.2.2.2.1.23 | ColumnhwVOPSetupInpDelayProfId4 | read-create | current | This object identifies a row in hwVOPINPDelayConfProfTable used for configuring the INP-Delay parameters of channel #4. If channel #4 is not being used this ob… |
| 1.3.6.1.4.1.2011.6.144.1.2.2.2.1.24 | ColumnhwVOPSetupLSpectrumProfId | read-create | current | This object identifies a row in hwVOPLineSpectrumConfProfTable used for configuring the spectrum parameters of the respective xDSL line. This object has read-w… |
| 1.3.6.1.4.1.2011.6.144.1.2.2.2.1.25 | ColumnhwVOPSetupUpboProfId | read-create | current | This object identifies a row in hwVOPUPBOConfProfTable used for configuring the upstream power back-off related parameters of the respective xDSL line. If this… |
| 1.3.6.1.4.1.2011.6.144.1.2.2.2.1.26 | ColumnhwVOPSetupDpboProfId | read-create | current | This object identifies a row in hwVOPDPBOConfProfTable used for configuring the downstream power back-off related parameters of the respective xDSL line. This … |
| 1.3.6.1.4.1.2011.6.144.1.2.2.2.1.27 | ColumnhwVOPSetupRfiProfId | read-create | current | This object identifies a row in hwVOPRFIConfProfTable used for configuring the RFI notches related parameters of the respective xDSL line. This object has read… |
| 1.3.6.1.4.1.2011.6.144.1.2.2.2.1.28 | ColumnhwVOPSetupNoiseMarginProfId | read-create | current | This object identifies a row in hwVOPSNRMarginConfProfTable used for configuring the noise margin related parameters of the respective xDSL line. This object h… |
| 1.3.6.1.4.1.2011.6.144.1.2.2.2.1.29 | ColumnhwVOPSetupVNoiseProfId | read-create | current | This object identifies a row in hwVOPVirtualNoiseConfProfTable used for configuring the virtual noise related parameters of the respective xDSL line. This obje… |
| 1.3.6.1.4.1.2011.6.144.1.2.2.2.1.30 | ColumnhwVOPSetupInmProfId | read-create | current | This object identifies a row in hwVOPINMConfProfTable used for configuring the impulse noise monitoring parameters of the respective xDSL line. This object has… |
| 1.3.6.1.4.1.2011.6.144.1.2.2.2.1.31 | ColumnhwVOPSetupUsDataRateProf1Description | read-create | current | This object identifies a row in hwVOPDataRateConfProfTable used for configuring the upstream transmission direction of channel #1. This object has read-write a… |
| 1.3.6.1.4.1.2011.6.144.1.2.2.2.1.32 | ColumnhwVOPSetupDsDataRateProf1Description | read-create | current | This object identifies a row in hwVOPDataRateConfProfTable used for configuring the downstream transmission direction of channel #1. This object has read-write… |
| 1.3.6.1.4.1.2011.6.144.1.2.2.2.1.33 | ColumnhwVOPSetupInpDelayProf1Description | read-create | current | This object identifies a row in hwVOPINPDelayConfProfTable used for configuring the INP-Delay parameters of channel #1. This object has read-write accessibilit… |
| 1.3.6.1.4.1.2011.6.144.1.2.2.2.1.34 | ColumnhwVOPSetupUsDataRateProf2Description | read-create | current | This object identifies a row in hwVOPDataRateConfProfTable used for configuring the upstream transmission direction of channel #2. If channel #2 is not being u… |
| 1.3.6.1.4.1.2011.6.144.1.2.2.2.1.35 | ColumnhwVOPSetupDsDataRateProf2Description | read-create | current | This object identifies a row in hwVOPDataRateConfProfTable used for configuring the downstream transmission direction of channel #2. If channel #2 is not being… |
| 1.3.6.1.4.1.2011.6.144.1.2.2.2.1.36 | ColumnhwVOPSetupInpDelayProf2Description | read-create | current | This object identifies a row in hwVOPINPDelayConfProfTable used for configuring the INP-Delay parameters of channel #2. If channel #2 is not being used this ob… |
| 1.3.6.1.4.1.2011.6.144.1.2.2.2.1.37 | ColumnhwVOPSetupLSpectrumProfDescription | read-create | current | This object identifies a row in hwVOPLineSpectrumConfProfTable used for configuring the spectrum parameters of the respective xDSL line. This object has read-w… |
| 1.3.6.1.4.1.2011.6.144.1.2.2.2.1.38 | ColumnhwVOPSetupUpboProfDescription | read-create | current | This object identifies a row in hwVOPUPBOConfProfTable used for configuring the upstream power back-off related parameters of the respective xDSL line. If this… |
| 1.3.6.1.4.1.2011.6.144.1.2.2.2.1.39 | ColumnhwVOPSetupDpboProfDescription | read-create | current | This object identifies a row in hwVOPDPBOConfProfTable used for configuring the downstream power back-off related parameters of the respective xDSL line. This … |
| 1.3.6.1.4.1.2011.6.144.1.2.2.2.1.40 | ColumnhwVOPSetupRfiProfDescription | read-create | current | This object identifies a row in hwVOPRFIConfProfTable used for configuring the RFI notches related parameters of the respective xDSL line. This object has read… |
| 1.3.6.1.4.1.2011.6.144.1.2.2.2.1.41 | ColumnhwVOPSetupNoiseMarginProfDescription | read-create | current | This object identifies a row in hwVOPSNRMarginConfProfTable used for configuring the noise margin related parameters of the respective xDSL line. This object h… |
| 1.3.6.1.4.1.2011.6.144.1.2.2.2.1.42 | ColumnhwVOPSetupVNoiseProfDescription | read-create | current | This object identifies a row in hwVOPVirtualNoiseConfProfTable used for configuring the virtual noise related parameters of the respective xDSL line. This obje… |
| 1.3.6.1.4.1.2011.6.144.1.2.2.2.1.43 | ColumnhwVOPSetupInmProfDescription | read-create | current | This object identifies a row in hwVOPINMConfProfTable used for configuring the impulse noise monitoring parameters of the respective xDSL line. This object has… |
| 1.3.6.1.4.1.2011.6.144.1.2.2.2.1.44 | ColumnhwVOPSetupSosProfId | read-create | current | This object identifies a row in hwVOPSosConfProfTable used for configuring the save our showtime parameters of the respective xDSL line. If this leaf is not su… |
| 1.3.6.1.4.1.2011.6.144.1.2.2.2.1.45 | ColumnhwVOPSetupSosProfDescription | read-create | current | This object identifies a row in hwVOPSosConfProfTable used for configuring the save our showtime parameters of the respective xDSL line. If this leaf is not su… |
| 1.3.6.1.4.1.2011.6.144.1.2.2.3 | TablehwVOPActSetupTable | not-accessible | current | This read-only table contains groups of profile indices actually attached to any xDSL line in the system. Each group of profile indices constructs a Vector Of … |
| 1.3.6.1.4.1.2011.6.144.1.2.2.3.1 | RowhwVOPActSetupEntry | not-accessible | current | This read-only table contains groups of profile indices actually attached to any xDSL line in the system. Each group of profile indices constructs a Vector Of … |
| 1.3.6.1.4.1.2011.6.144.1.2.2.3.1.1 | ColumnhwVOPActSetupIndex | not-accessible | current | The hwVOPActSetupIndex identifies a row in this table. A row in this table is indexed by an ifIndex pattern. |
| 1.3.6.1.4.1.2011.6.144.1.2.2.3.1.2 | ColumnhwVOPActSetupUsDataRateProfId1 | read-only | current | This object identifies a row in hwVOPDataRateConfProfTable used for configuring the upstream transmission direction of channel number #1. |
| 1.3.6.1.4.1.2011.6.144.1.2.2.3.1.3 | ColumnhwVOPActSetupUsRaRatio1 | read-only | current | Rate Adaptation Ratio. The ratio (in %) that is taken into account for the bearer channel #1 when performing rate adaptation on upstream. The ratio refers to t… |
| 1.3.6.1.4.1.2011.6.144.1.2.2.3.1.4 | ColumnhwVOPActSetupDsDataRateProfId1 | read-only | current | This object identifies a row in hwVOPDataRateConfProfTable used for configuring the downstream transmission direction of channel #1. |
| 1.3.6.1.4.1.2011.6.144.1.2.2.3.1.5 | ColumnhwVOPActSetupDsRaRatio1 | read-only | current | Rate Adaptation Ratio. The ratio (in %) that is taken into account for the bearer channel #1 when performing rate adaptation on downstream. The ratio refers to… |
| 1.3.6.1.4.1.2011.6.144.1.2.2.3.1.6 | ColumnhwVOPActSetupInpDelayProfId1 | read-only | current | This object identifies a row in hwVOPINPDelayConfProfTable used for configuring the INP-Delay parameters of channel #1. |
| 1.3.6.1.4.1.2011.6.144.1.2.2.3.1.7 | ColumnhwVOPActSetupUsDataRateProfId2 | read-only | current | This object identifies a row in hwVOPDataRateConfProfTable used for configuring the upstream transmission direction of channel #2. If channel #2 is not being u… |
| 1.3.6.1.4.1.2011.6.144.1.2.2.3.1.8 | ColumnhwVOPActSetupUsRaRatio2 | read-only | current | Rate Adaptation Ratio. The ratio (in %) that is taken into account for the bearer channel #2 when performing rate adaptation on upstream. The ratio refers to t… |
| 1.3.6.1.4.1.2011.6.144.1.2.2.3.1.9 | ColumnhwVOPActSetupDsDataRateProfId2 | read-only | current | This object identifies a row in hwVOPDataRateConfProfTable used for configuring the downstream transmission direction of channel #2. If channel #2 is not being… |
| 1.3.6.1.4.1.2011.6.144.1.2.2.3.1.10 | ColumnhwVOPActSetupDsRaRatio2 | read-only | current | Rate Adaptation Ratio. The ratio (in %) that is taken into account for the bearer channel #2 when performing rate adaptation on downstream. The ratio refers to… |
| 1.3.6.1.4.1.2011.6.144.1.2.2.3.1.11 | ColumnhwVOPActSetupInpDelayProfId2 | read-only | current | This object identifies a row in hwVOPINPDelayConfProfTable used for configuring the INP-Delay parameters of channel #2 If channel #2 is not being used this obj… |
| 1.3.6.1.4.1.2011.6.144.1.2.2.3.1.12 | ColumnhwVOPActSetupUsDataRateProfId3 | read-only | current | This object identifies a row in hwVOPDataRateConfProfTable used for configuring the upstream transmission direction of channel #3. If channel #3 is not being u… |
| 1.3.6.1.4.1.2011.6.144.1.2.2.3.1.13 | ColumnhwVOPActSetupUsRaRatio3 | read-only | current | Rate Adaptation Ratio. The ratio (in %) that is taken into account for the bearer channel #3 when performing rate adaptation on upstream. The ratio refers to t… |
| 1.3.6.1.4.1.2011.6.144.1.2.2.3.1.14 | ColumnhwVOPActSetupDsDataRateProfId3 | read-only | current | This object identifies a row in hwVOPDataRateConfProfTable used for configuring the downstream transmission direction of channel #3. If channel #3 is not being… |
| 1.3.6.1.4.1.2011.6.144.1.2.2.3.1.15 | ColumnhwVOPActSetupDsRaRatio3 | read-only | current | Rate Adaptation Ratio. The ratio (in %) that is taken into account for the bearer channel #3 when performing rate adaptation on downstream. The ratio refers to… |
| 1.3.6.1.4.1.2011.6.144.1.2.2.3.1.16 | ColumnhwVOPActSetupInpDelayProfId3 | read-only | current | This object identifies a row in hwVOPINPDelayConfProfTable used for configuring the INP-Delay parameters of channel #3 If channel #3 is not being used this obj… |
| 1.3.6.1.4.1.2011.6.144.1.2.2.3.1.17 | ColumnhwVOPActSetupUsDataRateProfId4 | read-only | current | This object identifies a row in hwVOPDataRateConfProfTable used for configuring the upstream transmission direction of channel #4. If channel #4 is not being u… |
| 1.3.6.1.4.1.2011.6.144.1.2.2.3.1.18 | ColumnhwVOPActSetupUsRaRatio4 | read-only | current | Rate Adaptation Ratio. The ratio (in %) that is taken into account for the bearer channel #4 when performing rate adaptation on upstream. The ratio refers to t… |
| 1.3.6.1.4.1.2011.6.144.1.2.2.3.1.19 | ColumnhwVOPActSetupDsDataRateProfId4 | read-only | current | This object identifies a row in hwVOPDataRateConfProfTable used for configuring the downstream transmission direction of channel #4. If channel #4 is not being… |
| 1.3.6.1.4.1.2011.6.144.1.2.2.3.1.20 | ColumnhwVOPActSetupDsRaRatio4 | read-only | current | Rate Adaptation Ratio. The ratio (in %) that is taken into account for the bearer channel #4 when performing rate adaptation on downstream. The ratio refers to… |
| 1.3.6.1.4.1.2011.6.144.1.2.2.3.1.21 | ColumnhwVOPActSetupInpDelayProfId4 | read-only | current | This object identifies a row in hwVOPINPDelayConfProfTable used for configuring the INP-Delay parameters of channel #4 If channel #4 is not being used this obj… |
| 1.3.6.1.4.1.2011.6.144.1.2.2.3.1.22 | ColumnhwVOPActSetupLSpectrumProfId | read-only | current | This object identifies a row in hwVOPLineSpectrumConfProfTable used for configuring the spectrum parameters of the respective xDSL line. |
| 1.3.6.1.4.1.2011.6.144.1.2.2.3.1.23 | ColumnhwVOPActSetupNoiseMarginProfId | read-only | current | This object identifies a row in hwVOPSNRMarginConfProfTable used for configuring the noise margin related parameters of the respective xDSL line. |
| 1.3.6.1.4.1.2011.6.144.1.2.2.3.1.24 | ColumnhwVOPActSetupVNoiseProfId | read-only | current | This object identifies a row in hwVOPVirtualNoiseConfProfTable used for configuring the virtual noise related parameters of the respective xDSL line. |
| 1.3.6.1.4.1.2011.6.144.1.2.2.3.1.25 | ColumnhwVOPActSetupUpboProfId | read-only | current | This object identifies a row in hwVOPUPBOConfProfTable used for configuring the upstream power back-off related parameters of the respective xDSL line. If this… |
| 1.3.6.1.4.1.2011.6.144.1.2.2.3.1.26 | ColumnhwVOPActSetupDpboProfId | read-only | current | This object identifies a row in hwVOPDPBOConfProfTable used for configuring the downstream power back-off related parameters of the respective xDSL line. |
| 1.3.6.1.4.1.2011.6.144.1.2.2.3.1.27 | ColumnhwVOPActSetupRfiProfId | read-only | current | This object identifies a row in hwVOPRFIConfProfTable used for configuring the RFI notches related parameters of the respective xDSL line. |
| 1.3.6.1.4.1.2011.6.144.1.2.2.3.1.28 | ColumnhwVOPActSetupInmProfId | read-only | current | This object identifies a row in hwVOPINMConfProfTable used for configuring the impulse noise monitoring parameters of the respective xDSL line. |
| 1.3.6.1.4.1.2011.6.144.1.2.2.3.1.29 | ColumnhwVOPActSetupUsDataRateProf1Description | read-only | current | This object identifies a row in hwVOPDataRateConfProfTable used for configuring the upstream transmission direction of channel number #1. |
| 1.3.6.1.4.1.2011.6.144.1.2.2.3.1.30 | ColumnhwVOPActSetupDsDataRateProf1Description | read-only | current | This object identifies a row in hwVOPDataRateConfProfTable used for configuring the downstream transmission direction of channel #1. |
| 1.3.6.1.4.1.2011.6.144.1.2.2.3.1.31 | ColumnhwVOPActSetupInpDelayProf1Description | read-only | current | This object identifies a row in hwVOPINPDelayConfProfTable used for configuring the INP-Delay parameters of channel #1. |
| 1.3.6.1.4.1.2011.6.144.1.2.2.3.1.32 | ColumnhwVOPActSetupUsDataRateProf2Description | read-only | current | This object identifies a row in hwVOPDataRateConfProfTable used for configuring the upstream transmission direction of channel #2. |
| 1.3.6.1.4.1.2011.6.144.1.2.2.3.1.33 | ColumnhwVOPActSetupDsDataRateProf2Description | read-only | current | This object identifies a row in hwVOPDataRateConfProfTable used for configuring the downstream transmission direction of channel #2. |
| 1.3.6.1.4.1.2011.6.144.1.2.2.3.1.34 | ColumnhwVOPActSetupInpDelayProf2Description | read-only | current | This object identifies a row in hwVOPINPDelayConfProfTable used for configuring the INP-Delay parameters of channel #2 |
| 1.3.6.1.4.1.2011.6.144.1.2.2.3.1.35 | ColumnhwVOPActSetupLSpectrumProfDescription | read-only | current | This object identifies a row in hwVOPLineSpectrumConfProfTable used for configuring the spectrum parameters of the respective xDSL line. |
| 1.3.6.1.4.1.2011.6.144.1.2.2.3.1.36 | ColumnhwVOPActSetupUpboProfDescription | read-only | current | This object identifies a row in hwVOPUPBOConfProfTable used for configuring the upstream power back-off related parameters of the respective xDSL line. If this… |
| 1.3.6.1.4.1.2011.6.144.1.2.2.3.1.37 | ColumnhwVOPActSetupDpboProfDescription | read-only | current | This object identifies a row in hwVOPDPBOConfProfTable used for configuring the downstream power back-off related parameters of the respective xDSL line. |
| 1.3.6.1.4.1.2011.6.144.1.2.2.3.1.38 | ColumnhwVOPActSetupRfiProfDescription | read-only | current | This object identifies a row in hwVOPRFIConfProfTable used for configuring the RFI notches related parameters of the respective xDSL line. |
| 1.3.6.1.4.1.2011.6.144.1.2.2.3.1.39 | ColumnhwVOPActSetupNoiseMarginProfDescription | read-only | current | This object identifies a row in hwVOPSNRMarginConfProfTable used for configuring the noise margin related parameters of the respective xDSL line. |
| 1.3.6.1.4.1.2011.6.144.1.2.2.3.1.40 | ColumnhwVOPActSetupVNoiseProfDescription | read-only | current | This object identifies a row in hwVOPVirtualNoiseConfProfTable used for configuring the virtual noise related parameters of the respective xDSL line. |
| 1.3.6.1.4.1.2011.6.144.1.2.2.3.1.41 | ColumnhwVOPActSetupInmProfDescription | read-only | current | This object identifies a row in hwVOPINMConfProfTable used for configuring the impulse noise monitoring parameters of the respective xDSL line. |
| 1.3.6.1.4.1.2011.6.144.1.2.2.3.1.42 | ColumnhwVOPActSetupSosProfId | read-only | current | This object identifies a row in hwVOPSosConfProfTable used for configuring the save our showtime parameters of the respective xDSL line. If this leaf is not su… |
| 1.3.6.1.4.1.2011.6.144.1.2.2.3.1.43 | ColumnhwVOPActSetupSosProfDescription | read-only | current | This object identifies a row in hwVOPSosConfProfTable used for configuring the save our showtime parameters of the respective xDSL line. If this leaf is not su… |
| 1.3.6.1.4.1.2011.6.144.1.2.2.4 | TablehwOntVdsl2VOPSetupTable | not-accessible | current | This table contains a collection of profile indices that construct a Vector Of Profiles (VoP). This table is used in both 'direct' and 'indirect' attachment-me… |
| 1.3.6.1.4.1.2011.6.144.1.2.2.4.1 | RowhwOntVdsl2VOPSetupEntry | not-accessible | current | This table contains a collection of profile indices that construct a Vector Of Profiles (VoP). This table is used in both 'direct' and 'indirect' attachment-me… |
| 1.3.6.1.4.1.2011.6.144.1.2.2.4.1.1 | ColumnhwVOPOntObjectIndex | not-accessible | current | ONT ID. |
| 1.3.6.1.4.1.2011.6.144.1.2.2.4.1.2 | ColumnhwVOPOntUniPhyType | not-accessible | current | This object indicates the physical type of ONT UNI. Options: 1. vdsl(37) - VDSL |
| 1.3.6.1.4.1.2011.6.144.1.2.2.4.1.3 | ColumnhwVOPOntVdsl2Portid | not-accessible | current | The ONT VDSL port ID. |
| 1.3.6.1.4.1.2011.6.144.1.2.2.4.1.4 | ColumnhwOntVdsl2VOPSetupUsDataRateProfId1 | read-create | current | This object identifies a row in hwVOPDataRateConfProfTable used for configuring the upstream transmission direction of channel #1. This object has read-write a… |
| 1.3.6.1.4.1.2011.6.144.1.2.2.4.1.5 | ColumnhwOntVdsl2VOPSetupUsRaRatio1 | read-create | current | Rate Adaptation Ratio. The ratio (in %) that should be taken into account for the bearer channel #1 when performing rate adaptation on upstream. The ratio refe… |
| 1.3.6.1.4.1.2011.6.144.1.2.2.4.1.6 | ColumnhwOntVdsl2VOPSetupDsDataRateProfId1 | read-create | current | This object identifies a row in hwVOPDataRateConfProfTable used for configuring the downstream transmission direction of channel #1. This object has read-write… |
| 1.3.6.1.4.1.2011.6.144.1.2.2.4.1.7 | ColumnhwOntVdsl2VOPSetupDsRaRatio1 | read-create | current | Rate Adaptation Ratio. The ratio (in %) that should be taken into account for the bearer channel #1 when performing rate adaptation on downstream. The ratio re… |
| 1.3.6.1.4.1.2011.6.144.1.2.2.4.1.8 | ColumnhwOntVdsl2VOPSetupInpDelayProfId1 | read-create | current | This object identifies a row in hwVOPINPDelayConfProfTable used for configuring the INP-Delay parameters of channel #1. This object has read-write accessibilit… |
| 1.3.6.1.4.1.2011.6.144.1.2.2.4.1.9 | ColumnhwOntVdsl2VOPSetupUsDataRateProfId2 | read-create | current | This object identifies a row in hwVOPDataRateConfProfTable used for configuring the upstream transmission direction of channel #2. If channel #2 is not being u… |
| 1.3.6.1.4.1.2011.6.144.1.2.2.4.1.10 | ColumnhwOntVdsl2VOPSetupUsRaRatio2 | read-create | current | Rate Adaptation Ratio. The ratio (in %) that should be taken into account for the bearer channel #2 when performing rate adaptation on upstream. The ratio refe… |
| 1.3.6.1.4.1.2011.6.144.1.2.2.4.1.11 | ColumnhwOntVdsl2VOPSetupDsDataRateProfId2 | read-create | current | This object identifies a row in hwVOPDataRateConfProfTable used for configuring the downstream transmission direction of channel #2. If channel #2 is not being… |
| 1.3.6.1.4.1.2011.6.144.1.2.2.4.1.12 | ColumnhwOntVdsl2VOPSetupDsRaRatio2 | read-create | current | Rate Adaptation Ratio. The ratio (in %) that should be taken into account for the bearer channel #2 when performing rate adaptation on downstream. The ratio re… |
| 1.3.6.1.4.1.2011.6.144.1.2.2.4.1.13 | ColumnhwOntVdsl2VOPSetupInpDelayProfId2 | read-create | current | This object identifies a row in hwVOPINPDelayConfProfTable used for configuring the INP-Delay parameters of channel #2. If channel #2 is not being used this ob… |
| 1.3.6.1.4.1.2011.6.144.1.2.2.4.1.14 | ColumnhwOntVdsl2VOPSetupUsDataRateProfId3 | read-create | current | This object identifies a row in hwVOPDataRateConfProfTable used for configuring the upstream transmission direction of channel #3. If channel #3 is not being u… |
| 1.3.6.1.4.1.2011.6.144.1.2.2.4.1.15 | ColumnhwOntVdsl2VOPSetupUsRaRatio3 | read-create | current | Rate Adaptation Ratio. The ratio (in %) that should be taken into account for the bearer channel #3 when performing rate adaptation on upstream. The ratio refe… |
| 1.3.6.1.4.1.2011.6.144.1.2.2.4.1.16 | ColumnhwOntVdsl2VOPSetupDsDataRateProfId3 | read-create | current | This object identifies a row in hwVOPDataRateConfProfTable used for configuring the downstream transmission direction of channel #3. If channel #3 is not being… |
| 1.3.6.1.4.1.2011.6.144.1.2.2.4.1.17 | ColumnhwOntVdsl2VOPSetupDsRaRatio3 | read-create | current | Rate Adaptation Ratio. The ratio (in %) that should be taken into account for the bearer channel #3 when performing rate adaptation on downstream. The ratio re… |
| 1.3.6.1.4.1.2011.6.144.1.2.2.4.1.18 | ColumnhwOntVdsl2VOPSetupInpDelayProfId3 | read-create | current | This object identifies a row in hwVOPINPDelayConfProfTable used for configuring the INP-Delay parameters of channel #3. If channel #3 is not being used this ob… |
| 1.3.6.1.4.1.2011.6.144.1.2.2.4.1.19 | ColumnhwOntVdsl2VOPSetupUsDataRateProfId4 | read-create | current | This object identifies a row in hwVOPDataRateConfProfTable used for configuring the upstream transmission direction of channel #4. If channel #4 is not being u… |
| 1.3.6.1.4.1.2011.6.144.1.2.2.4.1.20 | ColumnhwOntVdsl2VOPSetupUsRaRatio4 | read-create | current | Rate Adaptation Ratio. The ratio (in %) that should be taken into account for the bearer channel #4 when performing rate adaptation on upstream. The ratio refe… |
| 1.3.6.1.4.1.2011.6.144.1.2.2.4.1.21 | ColumnhwOntVdsl2VOPSetupDsDataRateProfId4 | read-create | current | This object identifies a row in hwVOPDataRateConfProfTable used for configuring the downstream transmission direction of channel #4. If channel #4 is not being… |
| 1.3.6.1.4.1.2011.6.144.1.2.2.4.1.22 | ColumnhwOntVdsl2VOPSetupDsRaRatio4 | read-create | current | Rate Adaptation Ratio. The ratio (in %) that should be taken into account for the bearer channel #4 when performing rate adaptation on downstream. The ratio re… |
| 1.3.6.1.4.1.2011.6.144.1.2.2.4.1.23 | ColumnhwOntVdsl2VOPSetupInpDelayProfId4 | read-create | current | This object identifies a row in hwVOPINPDelayConfProfTable used for configuring the INP-Delay parameters of channel #4. If channel #4 is not being used this ob… |
| 1.3.6.1.4.1.2011.6.144.1.2.2.4.1.24 | ColumnhwOntVdsl2VOPSetupLSpectrumProfId | read-create | current | This object identifies a row in hwVOPLineSpectrumConfProfTable used for configuring the spectrum parameters of the respective xDSL line. This object has read-w… |
| 1.3.6.1.4.1.2011.6.144.1.2.2.4.1.25 | ColumnhwOntVdsl2VOPSetupUpboProfId | read-create | current | This object identifies a row in hwVOPUPBOConfProfTable used for configuring the upstream power back-off related parameters of the respective xDSL line. If this… |
| 1.3.6.1.4.1.2011.6.144.1.2.2.4.1.26 | ColumnhwOntVdsl2VOPSetupDpboProfId | read-create | current | This object identifies a row in hwVOPDPBOConfProfTable used for configuring the downstream power back-off related parameters of the respective xDSL line. This … |
| 1.3.6.1.4.1.2011.6.144.1.2.2.4.1.27 | ColumnhwOntVdsl2VOPSetupRfiProfId | read-create | current | This object identifies a row in hwVOPRFIConfProfTable used for configuring the RFI notches related parameters of the respective xDSL line. This object has read… |
| 1.3.6.1.4.1.2011.6.144.1.2.2.4.1.28 | ColumnhwOntVdsl2VOPSetupNoiseMarginProfId | read-create | current | This object identifies a row in hwVOPSNRMarginConfProfTable used for configuring the noise margin related parameters of the respective xDSL line. This object h… |
| 1.3.6.1.4.1.2011.6.144.1.2.2.4.1.29 | ColumnhwOntVdsl2VOPSetupVNoiseProfId | read-create | current | This object identifies a row in hwVOPVirtualNoiseConfProfTable used for configuring the virtual noise related parameters of the respective xDSL line. This obje… |
| 1.3.6.1.4.1.2011.6.144.1.2.2.4.1.30 | ColumnhwOntVdsl2VOPSetupInmProfId | read-create | current | This object identifies a row in hwVOPINMConfProfTable used for configuring the impulse noise monitoring parameters of the respective xDSL line. This object has… |
| 1.3.6.1.4.1.2011.6.144.1.2.2.4.1.31 | ColumnhwOntVdsl2VOPLineAdminStatus | read-write | current | The current operational state of the ONT VDSL port. Options: 1. up(1) - indicates up operation. 2. down(2) - indicates down operation. |
| 1.3.6.1.4.1.2011.6.144.1.2.2.4.1.32 | ColumnhwOntVdsl2VOPSetupUsDataRateProf1Description | read-create | current | This object identifies a row in hwVOPDataRateConfProfTable used for configuring the upstream transmission direction of channel #1. This object has read-write a… |
| 1.3.6.1.4.1.2011.6.144.1.2.2.4.1.33 | ColumnhwOntVdsl2VOPSetupDsDataRateProf1Description | read-create | current | This object identifies a row in hwVOPDataRateConfProfTable used for configuring the downstream transmission direction of channel #1. This object has read-write… |
| 1.3.6.1.4.1.2011.6.144.1.2.2.4.1.34 | ColumnhwOntVdsl2VOPSetupInpDelayProf1Description | read-create | current | This object identifies a row in hwVOPINPDelayConfProfTable used for configuring the INP-Delay parameters of channel #1. This object has read-write accessibilit… |
| 1.3.6.1.4.1.2011.6.144.1.2.2.4.1.35 | ColumnhwOntVdsl2VOPSetupUsDataRateProf2Description | read-create | current | This object identifies a row in hwVOPDataRateConfProfTable used for configuring the upstream transmission direction of channel #2. If channel #2 is not being u… |
| 1.3.6.1.4.1.2011.6.144.1.2.2.4.1.36 | ColumnhwOntVdsl2VOPSetupDsDataRateProf2Description | read-create | current | This object identifies a row in hwVOPDataRateConfProfTable used for configuring the downstream transmission direction of channel #2. If channel #2 is not being… |
| 1.3.6.1.4.1.2011.6.144.1.2.2.4.1.37 | ColumnhwOntVdsl2VOPSetupInpDelayProf2Description | read-create | current | This object identifies a row in hwVOPINPDelayConfProfTable used for configuring the INP-Delay parameters of channel #2. If channel #2 is not being used this ob… |
| 1.3.6.1.4.1.2011.6.144.1.2.2.4.1.38 | ColumnhwOntVdsl2VOPSetupUsDataRateProf3Description | read-create | current | This object identifies a row in hwVOPDataRateConfProfTable used for configuring the upstream transmission direction of channel #3. This object has read-write a… |
| 1.3.6.1.4.1.2011.6.144.1.2.2.4.1.39 | ColumnhwOntVdsl2VOPSetupDsDataRateProf3Description | read-create | current | This object identifies a row in hwVOPDataRateConfProfTable used for configuring the downstream transmission direction of channel #3. This object has read-write… |
| 1.3.6.1.4.1.2011.6.144.1.2.2.4.1.40 | ColumnhwOntVdsl2VOPSetupInpDelayProf3Description | read-create | current | This object identifies a row in hwVOPINPDelayConfProfTable used for configuring the INP-Delay parameters of channel #3. This object has read-write accessibilit… |
| 1.3.6.1.4.1.2011.6.144.1.2.2.4.1.41 | ColumnhwOntVdsl2VOPSetupUsDataRateProf4Description | read-create | current | This object identifies a row in hwVOPDataRateConfProfTable used for configuring the upstream transmission direction of channel #4. This object has read-write a… |
| 1.3.6.1.4.1.2011.6.144.1.2.2.4.1.42 | ColumnhwOntVdsl2VOPSetupDsDataRateProf4Description | read-create | current | This object identifies a row in hwVOPDataRateConfProfTable used for configuring the downstream transmission direction of channel #4. This object has read-write… |
| 1.3.6.1.4.1.2011.6.144.1.2.2.4.1.43 | ColumnhwOntVdsl2VOPSetupInpDelayProf4Description | read-create | current | This object identifies a row in hwVOPINPDelayConfProfTable used for configuring the INP-Delay parameters of channel #4. This object has read-write accessibilit… |
| 1.3.6.1.4.1.2011.6.144.1.2.2.4.1.44 | ColumnhwOntVdsl2VOPSetupLSpectrumProfDescription | read-create | current | This object identifies a row in hwVOPLineSpectrumConfProfTable used for configuring the spectrum parameters of the respective xDSL line. This object has read-w… |
| 1.3.6.1.4.1.2011.6.144.1.2.2.4.1.45 | ColumnhwOntVdsl2VOPSetupUpboProfDescription | read-create | current | This object identifies a row in hwVOPUPBOConfProfTable used for configuring the upstream power back-off related parameters of the respective xDSL line. If this… |
| 1.3.6.1.4.1.2011.6.144.1.2.2.4.1.46 | ColumnhwOntVdsl2VOPSetupDpboProfDescription | read-create | current | This object identifies a row in hwVOPDPBOConfProfTable used for configuring the downstream power back-off related parameters of the respective xDSL line. This … |
| 1.3.6.1.4.1.2011.6.144.1.2.2.4.1.47 | ColumnhwOntVdsl2VOPSetupRfiProfDescription | read-create | current | This object identifies a row in hwVOPRFIConfProfTable used for configuring the RFI notches related parameters of the respective xDSL line. This object has read… |
| 1.3.6.1.4.1.2011.6.144.1.2.2.4.1.48 | ColumnhwOntVdsl2VOPSetupNoiseMarginProfDescription | read-create | current | This object identifies a row in hwVOPSNRMarginConfProfTable used for configuring the noise margin related parameters of the respective xDSL line. This object h… |
| 1.3.6.1.4.1.2011.6.144.1.2.2.4.1.49 | ColumnhwOntVdsl2VOPSetupVNoiseProfDescription | read-create | current | This object identifies a row in hwVOPVirtualNoiseConfProfTable used for configuring the virtual noise related parameters of the respective xDSL line. This obje… |
| 1.3.6.1.4.1.2011.6.144.1.2.2.4.1.50 | ColumnhwOntVdsl2VOPSetupInmProfDescription | read-create | current | This object identifies a row in hwVOPINMConfProfTable used for configuring the impulse noise monitoring parameters of the respective xDSL line. This object has… |
| 1.3.6.1.4.1.2011.6.144.2 | NodehwVOPConformance | |||
| 1.3.6.1.4.1.2011.6.144.2.1 | NodehwVOPGroups | |||
| 1.3.6.1.4.1.2011.6.144.3 | NodehwVOPTraps | |||
| 1.3.6.1.4.1.2011.6.144.3.1 | NodehwVOPCommonTraps | |||
| 1.3.6.1.4.1.2011.6.144.3.1.1 | NodehwVOPXdslPortTraps | |||
| 1.3.6.1.4.1.2011.6.144.3.1.1.1 | NotificationhwVOPProfileIDChangeTrap | current | The profile ID bound by the port change. 1. hwConfigChangeIP 2. ifIndex-the index of the xDSL interface. 3. hwVOPDataRateConfProfIndex configuring the downstre… | |
| 1.3.6.1.4.1.2011.6.144.3.2 | NodehwVOPAlarmTraps |
Type Definitions
| Name | Syntax | Status | Description |
|---|---|---|---|
| HWVOPAttachmentMethods | BITS { direct(0), indirect(1) } | current | This type should be used for objects that refer to methods of attaching Vector Of configuration Profiles (VoP) to xDSL lines. Two attachment methods are available. The 'direct' method is associating each xDSL line with … |
| HWVOPGfastIarBands | BITS { iarBand1800To2000(0), iarBand3500To4000(1), iarBand7000To7300(2), iarBand10100To10150(3), iarBand14000To14350(4), iarBand18068To18168(5), iarBand21000To21450(6), iarBand24890To24990(7), iarBand28000To29700(8), iarBand50000To54000(9), iarBand70000To70500(10), iarBand144000To148000(11) } | current | This type defines each International Amateur Radio (IAR) band whether transmit PSD reduction is enabled or disabled in that band. It is represented as a bitmap (0 if not allowed and 1 if allowed)with the following defin… |
| HWVOPGfastProfiles | BITS { fastProfile106(0), fastProfile212(1) } | current | This type defines for each profile whether operation according to that profile is allowed or disallowed. It is represented as a bitmap (0 if not allowed and 1 if allowed)with the following definitions. |
| HWVOPGfastPsdMask | OCTET STRING (SIZE(0..96)) | current | This is a structure that represents up to 32 PSD Mask breakpoints. Each breakpoint occupies 3 octets: The first two octets hold the index of the subcarrier associated with the breakpoint. The third octet holds the PSD r… |
| HWVOPGfastRaMode | INTEGER { manual(1), raInit(2), dynamicRa(3), dynamicwithfra(4) } | current | Specifies the rate adaptation behavior for the line. Options: 1. manual (1) - No Rate-Adaptation. The initialization process attempts to synchronize to a specified rate. 2. raInit (2) - Rate-Adaptation during initializa… |
| HWVOPProfileIndexOrZeroType | Unsigned32 (0 | 1..4294967295) | current | This type should be used as index parameter for vop profiles. 0 is a special value, which could only be used for profile assignment parameters in case of optional profiles and is not a valid profile index inside profile… |
| HWVOPSetupIndexOrZeroType | Unsigned32 (0 | 1..4294967295) | current | This type should be used as index parameter for Vector Of Profiles (VoP) setup table (hwVOPSetupTable), when rows in that table are created by the management system. 0 is a special value, which is not a valid VoP setup … |
| Xdsl2BandUs | INTEGER { us1(5), us2(7), us3(9), us4(11) } | current | Each value identifies a specific band in the upstream transmission direction (Excluding US0 band.). The possible values which identify a band are as follows: 1. us1(5) - Upstream band number 1 (US1). 2. us2(7) - Upstrea… |
| Xdsl2BitSwap | INTEGER { disable(1), enable(2) } | current | The bit swap upstream or downstream of a line. Options: 1. disable (1) - Disable the bit swap upstream or downstream of a line. 2. enable (2) - Enable the bit swap upstream or downstream of a line. |
| Xdsl2CarMask | OCTET STRING (SIZE(0..128)) | current | This type defines an array of bands. Each band is represented by 4 octets and there is a maximum of 32 bands allowed. Each band consists of a 16 bit start subcarrier index followed by a 16 bit stop subcarrier index. Sub… |
| Xdsl2ChInitPolicy | INTEGER { policy0(1), policy1(2), policy2(3) } | current | This syntax serves for channel configuration parameters that reference the channel initialization policy. Options: 1. policy0 (1) - Policy 0 according to the applicable standard 2. policy1 (2) - Policy 1 according to th… |
| Xdsl2DataPathMode | INTEGER { atm(1), ptm(2), both(3) } | current | The channel data path mode: Options: 1. atm (1) - Indicates the channel data path mode is ATM 2. ptm (2) - Indicates the channel data path mode is PTM 3. both (3) - Indicates both ATM and PTM data path mode are supported |
| Xdsl2LineCeFlag | BITS { enableCyclicExtension(0) } | current | This type is used to enable the use of the optional cyclic extension values. If the bit is set to 1, the optional cyclic extension values may be used. Otherwise, the cyclic extension shall be forced to the mandatory len… |
| Xdsl2LineClassMask | INTEGER { none(1), a998ORb997M1cORc998B(2), b997M1xOR998co(3), b997M2x(4), b998M1x(5), b998M2x(6), b998AdeM2x(7), bHpeM1(8), b998E35M2x(9), b998Ade35M2x(10) } | current | VDSL2 PSD Mask Class. The limit Power Spectral Density masks are grouped in the following PSD mask classes: Class 998 Annex A: D-32, D-48, D-64, D-128. Class 997-M1c Annex B: 997-M1c-A-7. Class 997-M1x Annex B: 997-M1x-… |
| Xdsl2LineClockReferenceType | INTEGER { freeRun(1), system(2) } | current | The various clock references for the xDSL line, represented as an enumeration. Options: 1. freeRun(1) - Clock references for the xDSL line is freeRun 2. system(2) - Clock references for the xDSL line is system |
| Xdsl2LineLimitMask | BITS { profile8Limit1(0), profile8Limit2(1), profile8Limit3(2), profile8Limit4(3), profile8Limit5(4), profile8Limit6(5), profile8Limit7(6), profile8Limit8(7), profile8Limit9(8), profile8Limit10(9), profile8Limit11(10), profile8Limit12(11), profile8Limit13(12), profile8Limit14(13), profile8Limit15(14), profile8Limit16(15), profile12Limit1(16), profile12Limit2(17), profile12Limit3(18), profile12Limit4(19), profile12Limit5(20), profile12Limit6(21), profile12Limit7(22), profile12Limit8(23), profile12Limit9(24), profile12Limit10(25), profile12Limit11(26), profile12Limit12(27), profile12Limit13(28), profile12Limit14(29), profile12Limit15(30), profile12Limit16(31), profile17Limit1(32), profile17Limit2(33), profile17Limit3(34), profile17Limit4(35), profile17Limit5(36), profile17Limit6(37), profile17Limit7(38), profile17Limit8(39), profile17Limit9(40), profile17Limit10(41), profile17Limit11(42), profile17Limit12(43), profile17Limit13(44), profile17Limit14(45), profile17Limit15(46), profile17Limit16(47), profile30Limit1(48), profile30Limit2(49), profile30Limit3(50), profile30Limit4(51), profile30Limit5(52), profile30Limit6(53), profile30Limit7(54), profile30Limit8(55), profile30Limit9(56), profile30Limit10(57), profile30Limit11(58), profile30Limit12(59), profile30Limit13(60), profile30Limit14(61), profile30Limit15(62), profile30Limit16(63), profile35Limit1(64), profile35Limit2(65), profile35Limit3(66), profile35Limit4(67), profile35Limit5(68), profile35Limit6(69), profile35Limit7(70), profile35Limit8(71), profile35Limit9(72), profile35Limit10(73), profile35Limit11(74), profile35Limit12(75), profile35Limit13(76), profile35Limit14(77), profile35Limit15(78), profile35Limit16(79) } | current | The G.993.2 limit PSD mask for each class of profile. The profiles are grouped in following profile classes: - Class 8: Profiles 8a, 8b, 8c, 8d - Class 12: Profiles 12a, 12b - Class 17: Profile 17a - Class 30: Profile 3… |
| Xdsl2LinePmMode | BITS { allowTransitionsToIdle(0), allowTransitionsToLowPower(1) } | current | Objects with this syntax are configuration parameters that reference the power modes/states into which the xTU-C or xTU-R may autonomously transit. It is a BITS structure that allows control of the following transit opt… |
| Xdsl2LineProfiles | BITS { profile8a(0), profile8b(1), profile8c(2), profile8d(3), profile12a(4), profile12b(5), profile17a(6), profile30a(7), profile35b(8), reserved1(9), reserved2(10), reserved3(11), reserved4(12), reserved5(13), reserved6(14), reserved7(15), reserved8(16), reserved9(17), reserved10(18), reserved11(19), reserved12(20), reserved13(21), reserved14(22), reserved15(23), reserved16(24), reserved17(25), reserved18(26), reserved19(27), reserved20(28), reserved21(29), reserved22(30), reserved23(31) } | current | Objects with this syntax reference the list of ITU-T G.993.2 implementation profiles supported by an xTU, enabled on the VDSL2 line or active on that line. |
| Xdsl2LinePsdMaskSelectUs | INTEGER { adlu32Eu32(1), adlu36Eu36(2), adlu40Eu40(3), adlu44Eu44(4), adlu48Eu48(5), adlu52Eu52(6), adlu56Eu56(7), adlu60Eu60(8), adlu64Eu64(9) } | current | This type is used to define which upstream PSD mask is enabled. This type is used only for Annexes J and M of ITU-T Recs G.992.3 and G.992.5. Options: 1. adlu32Eu32 (1) - ADLU-32 / EU-32 2. adlu36Eu36 (2) - ADLU-36 / EU… |
| Xdsl2LineSnrMode | INTEGER { virtualNoiseDisabled(1), virtualNoiseEnabled(2) } | current | This type is used to enable the transmitter referred virtual noise. Options: 1. virtualNoiseDisabled (1) - Virtual noise is disabled. 2. virtualNoiseEnabled (2) - Virtual noise is enabled. |
| Xdsl2LineTxRefVnDs | OCTET STRING (SIZE(0..96)) | current | This is a structure that represents up to 32 PSD Mask breakpoints. Each breakpoint occupies 3 octets: The first two octets hold the index of the subcarrier associated with the breakpoint. The third octet holds the PSD r… |
| Xdsl2LineTxRefVnUs | OCTET STRING (SIZE(0..48)) | current | This is a structure that represents up to 16 PSD Mask breakpoints. Each breakpoint occupies 3 octets: The first two octets hold the index of the subcarrier associated with the breakpoint. The third octet holds the PSD r… |
| Xdsl2LineUs0Disable | BITS { profile8Us0Disable1(0), profile8Us0Disable2(1), profile8Us0Disable3(2), profile8Us0Disable4(3), profile8Us0Disable5(4), profile8Us0Disable6(5), profile8Us0Disable7(6), profile8Us0Disable8(7), profile8Us0Disable9(8), profile8Us0Disable10(9), profile8Us0Disable11(10), profile8Us0Disable12(11), profile8Us0Disable13(12), profile8Us0Disable14(13), profile8Us0Disable15(14), profile8Us0Disable16(15), profile12Us0Disable1(16), profile12Us0Disable2(17), profile12Us0Disable3(18), profile12Us0Disable4(19), profile12Us0Disable5(20), profile12Us0Disable6(21), profile12Us0Disable7(22), profile12Us0Disable8(23), profile12Us0Disable9(24), profile12Us0Disable10(25), profile12Us0Disable11(26), profile12Us0Disable12(27), profile12Us0Disable13(28), profile12Us0Disable14(29), profile12Us0Disable15(30), profile12Us0Disable16(31), profile17Us0Disable1(32), profile17Us0Disable2(33), profile17Us0Disable3(34), profile17Us0Disable4(35), profile17Us0Disable5(36), profile17Us0Disable6(37), profile17Us0Disable7(38), profile17Us0Disable8(39), profile17Us0Disable9(40), profile17Us0Disable10(41), profile17Us0Disable11(42), profile17Us0Disable12(43), profile17Us0Disable13(44), profile17Us0Disable14(45), profile17Us0Disable15(46), profile17Us0Disable16(47), profile30Us0Disable1(48), profile30Us0Disable2(49), profile30Us0Disable3(50), profile30Us0Disable4(51), profile30Us0Disable5(52), profile30Us0Disable6(53), profile30Us0Disable7(54), profile30Us0Disable8(55), profile30Us0Disable9(56), profile30Us0Disable10(57), profile30Us0Disable11(58), profile30Us0Disable12(59), profile30Us0Disable13(60), profile30Us0Disable14(61), profile30Us0Disable15(62), profile30Us0Disable16(63), profile35Us0Disable1(64), profile35Us0Disable2(65), profile35Us0Disable3(66), profile35Us0Disable4(67), profile35Us0Disable5(68), profile35Us0Disable6(69), profile35Us0Disable7(70), profile35Us0Disable8(71), profile35Us0Disable9(72), profile35Us0Disable10(73), profile35Us0Disable11(74), profile35Us0Disable12(75), profile35Us0Disable13(76), profile35Us0Disable14(77), profile35Us0Disable15(78), profile35Us0Disable16(79) } | current | Indicates if US0 is disabled for each limit PSD mask. The profiles are grouped in following profile classes: - Class 8: Profiles 8a, 8b, 8c, 8d - Class 12: Profiles 12a, 12b - Class 17: Profile 17a - Class 30: Profile 3… |
| Xdsl2LineUs0Mask | BITS { eu32(0), eu36(1), eu40(2), eu44(3), eu48(4), eu52(5), eu56(6), eu60(7), eu64(8), eu128(9), reserved1(10), reserved2(11), reserved3(12), reserved4(13), reserved5(14), reserved6(15), adlu32(16), adlu36(17), adlu40(18), adlu44(19), adlu48(20), adlu52(21), adlu56(22), adlu60(23), adlu64(24), adlu128(25), reserved7(26), reserved8(27), reserved9(28), reserved10(29), reserved11(30), reserved12(31) } | current | The US0 PSD masks to be allowed by the near-end xTU on the line. This parameter is only defined for G.993.2 Annex A. It is represented as a bitmap (0 if not allowed and 1 if allowed) with the following definitions. |
| Xdsl2MaxBer | INTEGER { eminus3(1), eminus5(2), eminus7(3) } | current | Objects with this syntax are configuration parameters that reference the maximum Bit Error Rate (BER). Options: 1. eminus3 (1) - Maximum BER=E^-3 2. eminus5 (2) - Maximum BER=E^-5 3. eminus7 (3) - Maximum BER=E^-7 |
| Xdsl2PsdMaskDs | OCTET STRING (SIZE(0..96)) | current | This is a structure that represents up to 32 PSD Mask breakpoints. Each breakpoint occupies 3 octets: The first two octets hold the index of the subcarrier associated with the breakpoint. The third octet holds the PSD r… |
| Xdsl2PsdMaskUs | OCTET STRING (SIZE(0..48)) | current | This is a structure that represents up to 16 PSD Mask breakpoints. Each breakpoint occupies 3 octets: The first two octets hold the index of the subcarrier associated with the breakpoint. The third octet holds the PSD r… |
| Xdsl2RaMode | INTEGER { manual(1), raInit(2), dynamicRa(3), dynamicwithsos(4) } | current | Specifies the rate adaptation behavior for the line. Options: 1. manual (1) - No Rate-Adaptation. The initialization process attempts to synchronize to a specified rate. 2. raInit (2) - Rate-Adaptation during initializa… |
| Xdsl2RfiBands | OCTET STRING (SIZE(0..256)) | current | This type defines a subset of downstream PSD mask breakpoints used to notch radio frequency interference (RFI) bands. Each RFI band is represented by 4 octets: 16 bit start subcarrier index followed by a 16 bit stop sub… |
| Xdsl2ScMaskDs | OCTET STRING (SIZE(0..64)) | current | Each one of the 512 bits in this OCTET STRING array represents the corresponding subcarrier in the downstream direction. A bit value of one indicates that a subcarrier is masked. |
| Xdsl2ScMaskUs | OCTET STRING (SIZE (0..8)) | current | Each one of the 64 bits in this OCTET STRING array represents the corresponding subcarrier in the upstream direction. A bit value of one indicates that a subcarrier is masked. |
| Xdsl2SymbolProtection | INTEGER { noProtection (1), halfSymbol (2), singleSymbol (3), twoSymbols (4), threeSymbols (5), fourSymbols (6), fiveSymbols (7), sixSymbols (8), sevenSymbols (9), eightSymbols (10), nineSymbols (11), tenSymbols (12), elevenSymbols (13), twelveSymbols (14), thirteeSymbols (15), fourteenSymbols (16), fifteenSymbols (17), sixteenSymbols (18) } | current | This type specifies the minimum impulse noise protection for the bearer channel if it is transported over DMT symbols with a subcarrier spacing of 4.3125 kHz. The possible values are: 'noProtection' (i.e., INP not requi… |
| Xdsl2SymbolProtection8 | INTEGER { noProtection (1), singleSymbol (2), twoSymbols (3), threeSymbols (4), fourSymbols (5), fiveSymbols (6), sixSymbols (7), sevenSymbols (8), eightSymbols (9), nineSymbols (10), tenSymbols (11), elevenSymbols (12), twelveSymbols (13), thirteeSymbols (14), fourteenSymbols (15), fifteenSymbols (16), sixteenSymbols (17) } | current | This type specifies the minimum impulse noise protection for the bearer channel if it is transported over DMT symbols with a subcarrier spacing of 8.625 kHz. The possible values are: 'noProtection' (i.e., INP not requir… |
| Xdsl2TransmissionModeType | BITS { ansit1413(0), etsi(1), g9921PotsNonOverlapped(2), g9921PotsOverlapped(3), g9921IsdnNonOverlapped(4), g9921isdnOverlapped(5), g9921tcmIsdnNonOverlapped(6), g9921tcmIsdnOverlapped(7), g9922potsNonOverlapped(8), g9922potsOverlapped(9), g9922tcmIsdnNonOverlapped(10), g9922tcmIsdnOverlapped(11), g9921tcmIsdnSymmetric(12), reserved1(13), reserved2(14), reserved3(15), reserved4(16), reserved5(17), g9923PotsNonOverlapped(18), g9923PotsOverlapped(19), g9923IsdnNonOverlapped(20), g9923isdnOverlapped(21), reserved6(22), reserved7(23), g9924potsNonOverlapped(24), g9924potsOverlapped(25), reserved8(26), reserved9(27), g9923AnnexIAllDigNonOverlapped(28), g9923AnnexIAllDigOverlapped(29), g9923AnnexJAllDigNonOverlapped(30), g9923AnnexJAllDigOverlapped(31), g9924AnnexIAllDigNonOverlapped(32), g9924AnnexIAllDigOverlapped(33), g9923AnnexLMode1NonOverlapped(34), g9923AnnexLMode2NonOverlapped(35), g9923AnnexLMode3Overlapped(36), g9923AnnexLMode4Overlapped(37), g9923AnnexMPotsNonOverlapped(38), g9923AnnexMPotsOverlapped(39), g9925PotsNonOverlapped(40), g9925PotsOverlapped(41), g9925IsdnNonOverlapped(42), g9925isdnOverlapped(43), reserved10(44), reserved11(45), g9925AnnexIAllDigNonOverlapped(46), g9925AnnexIAllDigOverlapped(47), g9925AnnexJAllDigNonOverlapped(48), g9925AnnexJAllDigOverlapped(49), g9925AnnexMPotsNonOverlapped(50), g9925AnnexMPotsOverlapped(51), reserved12(52), reserved13(53), reserved14(54), reserved15(55), reserved16(56), reserved17(57), reserved18(58), reserved19(59), reserved20(60), reserved21(61), reserved22(62), reserved23(63), reserved24(64), reserved25(65), reserved26(66), reserved27(67), reserved28(68), reserved29(69), reserved30(70), reserved31(71), g9932AnnexAPots(72), g9932AnnexAIsdn(73), g9932AnnexBPots(74), g9932AnnexBIsdn(75), g9932AnnexCPots(76), g9932AnnexCIsdn(77), reserved32(78), reserved33(79), reserved34(80), g9701(81), reserved35(82), reserved36(83), reserved37(84), reserved38(85), reserved39(86), reserved40(87), reserved41(88), reserved42(89), reserved43(90), reserved44(91), reserved45(92), reserved46(93), reserved47(94), reserved48(95), reserved49(96), reserved50(97), reserved51(98), reserved52(99), reserved53(100), reserved54(101), reserved55(102), reserved56(103), reserved57(104), reserved58(105), reserved59(106), reserved60(107), reserved61(108), reserved62(109), reserved63(110), reserved64(111), reserved65(112), reserved66(113), reserved67(114), reserved68(115), reserved69(116), reserved70(117), reserved71(118), reserved72(119), reserved73(120), reserved74(121), reserved75(122), reserved76(123), reserved77(124), reserved78(125), reserved79(126), reserved80(127) } | current | A set of xDSL line transmission modes, with one bit per mode. The notes (F) and (L) denote Full-Rate and Lite/splitterless respectively. Options: Bit 00 : Regional Std. (ANSI T1.413) (F) Bit 01 : Regional Std. (ETSI DTS… |
| Xdsl2UpboBoostMode | INTEGER { disable(1), enable(2) } | current | The Equalized FEXT UPBO method. Options: 1.disable(1) - The Equalized FEXT UPBO method is not supported. 2.enable(2) - The Equalized FEXT UPBO method is supported. |
| Xdsl2UpboKLF | INTEGER { auto(1), override(2), disableUpbo(3) } | current | Defines the upstream power backoff force mode (UPBOKLF). Options: 1. auto(1) - The VTUs will autonomously determine the electrical length. 2. override(2) - Forces the VTU-R to use the electrical length, kl0, of the CO-M… |