HUAWEI-WLAN-AP-UPDATE-MIB
69 objects
The MIB module defines the AP update operation.
Imported Objects
| HUAWEI-WLAN-AP-MIB | hwWlanApId hwWlanApMac hwWlanApName hwWlanApType |
| HUAWEI-WLAN-CONFIGURATION-MIB | hwAPGroupName |
| HUAWEI-WLAN-MIB | hwWlan |
| SNMPv2-CONF | MODULE-COMPLIANCE NOTIFICATION-GROUP OBJECT-GROUP |
| SNMPv2-SMI | Counter64 Integer32 IpAddress MODULE-IDENTITY NOTIFICATION-TYPE OBJECT-TYPE Unsigned32 |
| SNMPv2-TC | DateAndTime MacAddress RowStatus |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.2011.6.139.14 | IdentityhwWlanApUpdate | The MIB module defines the AP update operation. | ||
| 1.3.6.1.4.1.2011.6.139.14.1 | NodehwWlanApUpdateTrap | |||
| 1.3.6.1.4.1.2011.6.139.14.1.1 | NotificationhwWlanApUpdateBeginTrap | current | This object indicates an AP upgrade start alarm.. | |
| 1.3.6.1.4.1.2011.6.139.14.1.2 | NotificationhwWlanApUpdateResultTrap | current | This object indicates the upgrade result alarm. | |
| 1.3.6.1.4.1.2011.6.139.14.1.3 | NotificationhwWlanApUpdateUbootNotMatchTrap | current | This object indicates that the Uboot version does not match the AP version. | |
| 1.3.6.1.4.1.2011.6.139.14.2 | NodehwWlanApUpdateTrapObjects | |||
| 1.3.6.1.4.1.2011.6.139.14.2.1 | ScalarhwWlanApUpdateResult | read-only | current | AP upgrade result. |
| 1.3.6.1.4.1.2011.6.139.14.2.2 | ScalarhwWlanApUpdateTime | read-only | current | AP upgrade time. |
| 1.3.6.1.4.1.2011.6.139.14.2.3 | ScalarhwWlanApUpdateByFileName | read-only | current | AP upgrade file name. |
| 1.3.6.1.4.1.2011.6.139.14.2.4 | ScalarhwWlanApUpdateNextOper | read-only | current | Action after the upgrade. |
| 1.3.6.1.4.1.2011.6.139.14.2.5 | ScalarhwWlanApUpdateResultStatus | read-only | current | AP upgrade result status. |
| 1.3.6.1.4.1.2011.6.139.14.3 | NodehwWlanApUpdateObjects | |||
| 1.3.6.1.4.1.2011.6.139.14.3.1 | NodehwWlanApUpdateConfig | |||
| 1.3.6.1.4.1.2011.6.139.14.3.1.1 | ScalarhwWlanApUpdateFTPIPAddress | read-write | current | This object indicates the IP address of the FTP server used in FTP upgrade mode. |
| 1.3.6.1.4.1.2011.6.139.14.3.1.2 | ScalarhwWlanApUpdateFTPUsername | read-write | current | This object indicates the user name of the FTP client used in FTP upgrade mode. NOTE: It should be configured together with hwWlanApUpdateFTPIPAddress or hwWla… |
| 1.3.6.1.4.1.2011.6.139.14.3.1.3 | ScalarhwWlanApUpdateFTPPassword | read-write | current | This object indicates the password of the FTP client used in FTP upgrade mode. NOTE: It should be configured together with hwWlanApUpdateFTPIPAddress or hwWlan… |
| 1.3.6.1.4.1.2011.6.139.14.3.1.4 | ScalarhwWlanApUpdateMode | read-write | current | This object indicates the AP upgrade mode. |
| 1.3.6.1.4.1.2011.6.139.14.3.1.5 | ScalarhwWlanApUpdateSFTPIPAddress | read-write | current | This object indicates the IP address of the SFTP server used in SFTP upgrade mode. |
| 1.3.6.1.4.1.2011.6.139.14.3.1.6 | ScalarhwWlanApUpdateSFTPUsername | read-write | current | This object indicates the user name of the SFTP client used in SFTP upgrade mode. NOTE: It should be configured together with hwWlanApUpdateSFTPIPAddress or hw… |
| 1.3.6.1.4.1.2011.6.139.14.3.1.7 | ScalarhwWlanApUpdateSFTPPassword | read-write | current | This object indicates the password of the SFTP client used in SFTP upgrade mode. NOTE: It should be configured together with hwWlanApUpdateSFTPIPAddress or hwW… |
| 1.3.6.1.4.1.2011.6.139.14.3.1.8 | ScalarhwWlanApUpdateFTPMaxConnectNum | read-write | current | This object indicates the maximum number of FTP connections. |
| 1.3.6.1.4.1.2011.6.139.14.3.1.9 | ScalarhwWlanApUpdateSFTPMaxConnectNum | read-write | current | This object indicates the maximum number of SFTP connections. |
| 1.3.6.1.4.1.2011.6.139.14.3.1.10 | ScalarhwWlanApUpdateFTPIPv6Address | read-write | current | This object indicates the IPv6 address of the FTP server. |
| 1.3.6.1.4.1.2011.6.139.14.3.1.11 | ScalarhwWlanApUpdateSFTPIPv6Address | read-write | current | This object indicates the IPv6 address of the SFTP server. |
| 1.3.6.1.4.1.2011.6.139.14.3.2 | TablehwWlanApUpdateTable | not-accessible | current | This table maps AP types to upgrade file names. It allows you to upgrade APs in batches based on AP types. |
| 1.3.6.1.4.1.2011.6.139.14.3.2.1 | RowhwWlanApUpdateEntry | not-accessible | current | The index of this table is hwWlanApType. |
| 1.3.6.1.4.1.2011.6.139.14.3.2.1.1 | ColumnhwWlanApUpdateFilename | read-create | current | This object indicates the name of the upgrade file matching the type of the APs to be upgraded. |
| 1.3.6.1.4.1.2011.6.139.14.3.2.1.2 | ColumnhwWlanApUpdateAdminOper | read-create | current | This object indicates that the APs begin to upgrade start(1): The AP upgrade starts reset(2): After the upgrade is complete, the APs are restarted cancel(3): T… |
| 1.3.6.1.4.1.2011.6.139.14.3.2.1.3 | ColumnhwWlanApUpdatePercent | read-only | current | This object indicates the AP upgrade progress, namely, the percentage of upgraded APs to all APs of the same type. |
| 1.3.6.1.4.1.2011.6.139.14.3.2.1.4 | ColumnhwWlanApUpdateRowStatus | read-create | current | This object indicates the row status of this table. |
| 1.3.6.1.4.1.2011.6.139.14.3.3 | TablehwWlanApUpdateProgressTable | not-accessible | current | This table is used to query the AP upgrade progress. |
| 1.3.6.1.4.1.2011.6.139.14.3.3.1 | RowhwWlanApUpdateProgressEntry | not-accessible | current | The index of this table is hwWlanApMac. |
| 1.3.6.1.4.1.2011.6.139.14.3.3.1.1 | ColumnhwWlanApUpdateProgressStatus | read-only | current | This object indicates the AP upgrade status. |
| 1.3.6.1.4.1.2011.6.139.14.3.3.1.2 | ColumnhwWlanApUpdateProgress | read-only | current | This object indicates the AP upgrade progress. |
| 1.3.6.1.4.1.2011.6.139.14.3.3.1.3 | ColumnhwWlanApFlashProgress | read-only | current | This object indicates the flash writing progress. |
| 1.3.6.1.4.1.2011.6.139.14.3.3.1.4 | ColumnhwWlanApUpdateType | read-only | current | This object indicates the AP upgrade type. |
| 1.3.6.1.4.1.2011.6.139.14.3.3.1.5 | ColumnhwWlanApUpdateFileType | read-only | current | This object indicates the AP upgrade file type. |
| 1.3.6.1.4.1.2011.6.139.14.3.4 | TablehwWlanSingleApUpdateTable | not-accessible | current | This table is used to specify the mapping relationship between AP IDs and upgrade file names and to perform upgrade based on specified APs. |
| 1.3.6.1.4.1.2011.6.139.14.3.4.1 | RowhwWlanSingleApUpdateEntry | not-accessible | current | The index of this table is hwWlanApMac. |
| 1.3.6.1.4.1.2011.6.139.14.3.4.1.1 | ColumnhwWlanSingleApUpdateAdminOper | read-write | current | This object indicates a single AP upgrade start(1): The AP upgrade starts reset(2): After the upgrade is complete, the AP is restarted cancel(3): The upgrade i… |
| 1.3.6.1.4.1.2011.6.139.14.3.4.1.2 | ColumnhwWlanSingleApUpdatePercent | read-only | current | This object indicates the single AP upgrade progress. |
| 1.3.6.1.4.1.2011.6.139.14.3.4.1.3 | ColumnhwWlanSingleApUpdateFilename | read-create | current | This object indicates the name of the upgrade file matching the type of the AP to be upgraded. |
| 1.3.6.1.4.1.2011.6.139.14.3.5 | TablehwWlanApTypeGroupUpdateTable | not-accessible | current | This table is used to map AP types and AP groups to upgrade file names. It allows you to upgrade APs in batches based on AP types and AP groups. |
| 1.3.6.1.4.1.2011.6.139.14.3.5.1 | RowhwWlanApTypeGroupUpdateEntry | not-accessible | current | The indexes of this table are hwWlanApType and hwAPGroupName. |
| 1.3.6.1.4.1.2011.6.139.14.3.5.1.1 | ColumnhwWlanApTypeGroupUpdateFilename | read-write | current | This object indicates the name of the upgrade file matching the type of the APs to be upgraded. |
| 1.3.6.1.4.1.2011.6.139.14.3.5.1.2 | ColumnhwWlanApTypeGroupUpdateAdminOper | read-write | current | This object indicates an upgrade operation start(1): The AP upgrade starts reset(2): After the upgrade is complete, the APs are restarted cancel(3): The upgrad… |
| 1.3.6.1.4.1.2011.6.139.14.3.5.1.3 | ColumnhwWlanApTypeGroupUpdatePercent | read-only | current | This object indicates the AP upgrade progress, namely, the percentage of upgraded APs to all APs of the same type. |
| 1.3.6.1.4.1.2011.6.139.14.3.5.1.4 | ColumnhwWlanApTypeGroupUpdateRowStatus | read-create | current | This object indicates the row status of this table. |
| 1.3.6.1.4.1.2011.6.139.14.3.6 | TablehwWlanApUpdateScheduleTaskTable | not-accessible | current | This table is used to create, query, and delete scheduled upgrade tasks. |
| 1.3.6.1.4.1.2011.6.139.14.3.6.1 | RowhwWlanApUpdateScheduleTaskEntry | not-accessible | current | The indexes of this table is hwWlanApUpdateScheduleTaskId. |
| 1.3.6.1.4.1.2011.6.139.14.3.6.1.1 | ColumnhwWlanApUpdateScheduleTaskId | not-accessible | current | This object indicates the ID of the task. |
| 1.3.6.1.4.1.2011.6.139.14.3.6.1.2 | ColumnhwWlanApUpdateScheduleTaskStartTime | read-write | current | This object indicates the starting time that is in the format of 'YYYY/MM/DD,HH:MM'. |
| 1.3.6.1.4.1.2011.6.139.14.3.6.1.3 | ColumnhwWlanApUpdateScheduleTaskStopTime | read-write | current | This object indicates the stopping time that is in the format of 'YYYY/MM/DD,HH:MM'. |
| 1.3.6.1.4.1.2011.6.139.14.3.6.1.4 | ColumnhwWlanApUpdateScheduleTaskApType | read-write | current | This object indicates the type of the APs to be upgraded. |
| 1.3.6.1.4.1.2011.6.139.14.3.6.1.5 | ColumnhwWlanApUpdateScheduleTaskApGroup | read-write | current | This object indicates the group of the APs to be upgraded. |
| 1.3.6.1.4.1.2011.6.139.14.3.6.1.6 | ColumnhwWlanApUpdateScheduleTaskState | read-only | current | This object indicates the state of the task. |
| 1.3.6.1.4.1.2011.6.139.14.3.6.1.7 | ColumnhwWlanApUpdateScheduleTaskRowStatus | read-create | current | This object indicates the row status. |
| 1.3.6.1.4.1.2011.6.139.14.3.7 | NodehwWlanApUpdateOperEntry | |||
| 1.3.6.1.4.1.2011.6.139.14.3.7.1 | ScalarhwWlanApUpdateOperAdminOper | read-write | current | This object indicates that the APs begin to upgrade start(1): The AP upgrade starts reset(2): After the upgrade is complete, the APs are restarted cancel(3): T… |
| 1.3.6.1.4.1.2011.6.139.14.3.7.2 | ScalarhwWlanApUpdateOperApType | read-write | current | This object indicates the type of the APs to be upgraded. |
| 1.3.6.1.4.1.2011.6.139.14.3.7.3 | ScalarhwWlanApUpdateOperApGroup | read-write | current | This object indicates the group of the APs to be upgraded. |
| 1.3.6.1.4.1.2011.6.139.14.3.7.4 | ScalarhwWlanApUpdateOperPercent | read-only | current | This object indicates the AP upgrade progress, namely, the percentage of upgraded APs to all APs. |
| 1.3.6.1.4.1.2011.6.139.14.4 | NodehwWlanApUpdateConformance | |||
| 1.3.6.1.4.1.2011.6.139.14.4.1 | NodehwWlanApUpdateCompliances | |||
| 1.3.6.1.4.1.2011.6.139.14.4.1.1 | CompliancehwWlanApUpdateCompliance | current | Description. | |
| 1.3.6.1.4.1.2011.6.139.14.4.2 | NodehwWlanApUpdateObjectGroups | |||
| 1.3.6.1.4.1.2011.6.139.14.4.2.1 | GrouphwWlanApUpdateTrapGroup | current | Description. | |
| 1.3.6.1.4.1.2011.6.139.14.4.2.2 | GrouphwWlanApUpdateTrapObjectsGroup | current | Description. | |
| 1.3.6.1.4.1.2011.6.139.14.4.2.3 | GrouphwWlanApUpdateObjectsGroup | current | Description. |