HUAWEI-XDSL-COMMON-MIB
98 objects
This MIB is used for defining Huawei's XDSL common management MIB objects, which provides XDSL management NMS interfaces.
Imported Objects
| HUAWEI-DEVICE-MIB | hwConfigChangeIP hwFrameIndex hwPortIndex hwSlotIndex hwSubslotIndex |
| HUAWEI-MIB | huaweiUtility |
| HUAWEI-TC-MIB | hwAlarmId hwAlarmSn hwAlarmTime hwCauseId hwTrapType |
| IF-MIB | ifIndex |
| SNMPv2-SMI | Counter32 Gauge32 Integer32 MODULE-IDENTITY NOTIFICATION-TYPE OBJECT-TYPE Unsigned32 |
| SNMPv2-TC | DateAndTime PhysAddress RowStatus TEXTUAL-CONVENTION |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.2011.6.148 | IdentityhwXdslCommon | This MIB is used for defining Huawei's XDSL common management MIB objects, which provides XDSL management NMS interfaces. | ||
| 1.3.6.1.4.1.2011.6.148.1 | NodehwXdslCommonMib | |||
| 1.3.6.1.4.1.2011.6.148.1.1 | NodehwXdslAutoDeleteProfUnused | |||
| 1.3.6.1.4.1.2011.6.148.1.1.1 | ScalarhwXdslAutoDeleteProfUnusedProfType | read-write | current | The profile type of deleting unused XDSL profile. Options: 1. vdsl2LineConfTemplate(1) - Vdsl line template 2. vdsl2LineConfProf(2) - Vdsl line profile 3. vdsl… |
| 1.3.6.1.4.1.2011.6.148.1.1.2 | ScalarhwXdslAutoDeleteProfUnusedOperType | read-write | current | The operation type of deleting unused xDSL profile. Options: 1. first(1) - Delete the first unused xDSL profile 2. all(2) - Delete all the unused xDSL profile … |
| 1.3.6.1.4.1.2011.6.148.1.2 | TablehwXdslLineTable | not-accessible | current | The table hwXdslLineTable contains status parameters of xDSL line. The index of this table is ifIndex. |
| 1.3.6.1.4.1.2011.6.148.1.2.1 | RowhwXdslLineEntry | not-accessible | current | The table hwXdslLineTable contains status parameters of xDSL line. The index of this entry is ifIndex. |
| 1.3.6.1.4.1.2011.6.148.1.2.1.1 | ColumnhwAllChActDataRateDs | read-only | current | The downstream actual net data rate that the bearer channel is operating at, if in L0 power management state. In L1 or L2 states, it relates to the previous L0… |
| 1.3.6.1.4.1.2011.6.148.1.2.1.2 | ColumnhwAllChActDataRateUs | read-only | current | The upstream actual net data rate that the bearer channel is operating at, if in L0 power management state. In L1 or L2 states, it relates to the previous L0 s… |
| 1.3.6.1.4.1.2011.6.148.1.3 | TablehwXdslPortFrequentRetrainControlTable | not-accessible | current | The table hwXdslPortFrequentRetrainControlTable contains information of xDSL port frequent retrain control policy. The index of this table is ifIndex. |
| 1.3.6.1.4.1.2011.6.148.1.3.1 | RowhwXdslPortFrequentRetrainControlEntry | not-accessible | current | The table hwXdslPortFrequentRetrainControlTable contains information of xDSL port frequent retrain control policy. The index of this entry is ifIndex. |
| 1.3.6.1.4.1.2011.6.148.1.3.1.1 | ColumnhwXdslPortFrequentRetrainControlTimes | read-write | current | The times that xDSL port frequent retrain. The invalid value is 4294967295. If board does not support the operation, the invalid value will be returned. |
| 1.3.6.1.4.1.2011.6.148.1.3.1.2 | ColumnhwXdslPortFrequentRetrainControlPolicy | read-write | current | The control policy that xDSL port frequent retrain. Options: 1. lock(1) - The port is not allowed to go online within 15 minutes 2. nolimit(2) - The port can g… |
| 1.3.6.1.4.1.2011.6.148.1.3.1.3 | ColumnhwXdslPortFrequentRetrainControlPostponedTime | read-write | current | The postponed time when control policy of xDSL port frequent retrain is postponed. The invalid value is 4294967295. If board does not support the operation, th… |
| 1.3.6.1.4.1.2011.6.148.1.3.1.4 | ColumnhwXdslPortFrequentRetrainControlState | read-only | current | The actual control state of the port. When the port is not under frequent retrain control in the current interval, the value of the remaining time of the curre… |
| 1.3.6.1.4.1.2011.6.148.1.3.1.5 | ColumnhwXdslPortFrequentRetrainControlRemainingTime | read-only | current | The remaining time of the current control interval, a special value 4294967295 indicates there is no limit for the link currently. |
| 1.3.6.1.4.1.2011.6.148.1.3.1.6 | ColumnhwXdslPortFrequentRetrainControlFurtherControlCfg | read-write | current | Further control policy for frequent retrain. Options: 1. enable(1) - Enable the further control policy for frequent retrain 2. disable(2) - Disable the further… |
| 1.3.6.1.4.1.2011.6.148.1.3.1.7 | ColumnhwXdslPortFrequentRetrainControlFurtherControlDetectPeriod | read-write | current | Detection period of the further control policy for frequent retrain. The invalid value is 4294967295. |
| 1.3.6.1.4.1.2011.6.148.1.3.1.8 | ColumnhwXdslPortFrequentRetrainControlFurtherControlPolicy | read-write | current | Further control policy for frequent retrain. Options: 1. permanentLock(1) - Permanently disable activation in any mode 2. permanentNonVectoring(2) - Permanentl… |
| 1.3.6.1.4.1.2011.6.148.1.3.1.9 | ColumnhwXdslPortFrequentRetrainControFurtherControllState | read-only | current | Control status of the further activation. Options: 1. controlled(1) - The port is under the further frequent retrain control. 2. notControlled(2) - The port is… |
| 1.3.6.1.4.1.2011.6.148.1.3.1.10 | ColumnhwXdslPortFrequentRetrainControlRemove | read-write | current | Remove the current frequent retrain control. If it is set to true, the control status is removed, and the system returns false upon a reading request. Options:… |
| 1.3.6.1.4.1.2011.6.148.1.4 | NodehwXdslAttndrConfig | |||
| 1.3.6.1.4.1.2011.6.148.1.4.1 | ScalarhwXdslAttndrMethod | read-write | current | This parameter specifies the method to be used for the calculation of the ATTNDR in the downstream and upstream direction. The parameter can take three values … |
| 1.3.6.1.4.1.2011.6.148.1.5 | NodehwXdslADSL1INPAdaptionConfig | |||
| 1.3.6.1.4.1.2011.6.148.1.5.1 | ScalarhwXdslADSL1INPAdaption | read-write | current | Enable/Disable the global ADSL1 INP Adaption configuration. This object is defaulted disable(2). This configuration will take effect after port manually reacti… |
| 1.3.6.1.4.1.2011.6.148.1.6 | TablehwXdslPortStatusInfoCollectTable | not-accessible | current | Indicates the configuration of running line information collection. The indexes of this table are hwFrameIndex and hwSlotIndex. |
| 1.3.6.1.4.1.2011.6.148.1.6.1 | RowhwXdslPortStatusInfoCollectEntry | not-accessible | current | Indicates the configuration of running line information collection. The indexes of this entry are hwFrameIndex and hwSlotIndex. |
| 1.3.6.1.4.1.2011.6.148.1.6.1.1 | ColumnhwXdslPortStatusInfoCollectStart | read-write | current | The leaf is used to start the running line information collection. Options: 1. start(1) - Start to collect information about running lines. 2. invalid(-1) - In… |
| 1.3.6.1.4.1.2011.6.148.1.6.1.2 | ColumnhwXdslPortStatusInfoCollectState | read-only | current | Indicates the status of running line information collection. Options: 1. nocollect(1) - The collection does not start. 2. collecting(2) - The colleciton is run… |
| 1.3.6.1.4.1.2011.6.148.1.6.1.3 | ColumnhwXdslPortStatusInfoCollectPortList | read-write | current | Defines an operating port list of a certain xDSL board. Each bit of this string specifies a port. The bit whose value is 1 belongs to a port set and whose valu… |
| 1.3.6.1.4.1.2011.6.148.1.6.1.4 | ColumnhwXdslPortStatusInfoCollectRequestId | read-write | current | The xdsl port status info collect request ID, which identifies a collect request delivered by the NMS. An collect request ID can be any unsigned integer in the… |
| 1.3.6.1.4.1.2011.6.148.1.7 | NodehwXdslPortAutoResetConfig | |||
| 1.3.6.1.4.1.2011.6.148.1.7.1 | ScalarhwXdslPortAutoResetControl | read-write | current | Enable/Disable the automatic detection for xDSL port offline and reset. This object is defaulted disable(2). Options: 1. enable(1) - Enable the xDSL port auto … |
| 1.3.6.1.4.1.2011.6.148.1.8 | NodehwXdslReversePoweringGlobalConfig | |||
| 1.3.6.1.4.1.2011.6.148.1.8.1 | ScalarhwXdslReversePoweringMode | read-write | current | This object indicates the reverse-powering mode of the system. Warning: this operation will interrupt services on some ports. Default values: currentport Optio… |
| 1.3.6.1.4.1.2011.6.148.1.9 | TablehwXdslReversePoweringLineTable | not-accessible | current | The table hwXdslReversePoweringLineTable contains reverse-powering parameters of xDSL line. The index of this table is ifIndex. |
| 1.3.6.1.4.1.2011.6.148.1.9.1 | RowhwXdslReversePoweringLineEntry | not-accessible | current | The table hwXdslReversePoweringLineTable contains reverse-powering parameters of xDSL line. The index of this entry is ifIndex. |
| 1.3.6.1.4.1.2011.6.148.1.9.1.1 | ColumnhwXdslReversePoweringStatus | read-only | current | Port reverse powering status. Options: 1. normal(1) - The CPE properly supplies power to the CO side. 2. fault(2) - The CPE fails to supply power to the CO sid… |
| 1.3.6.1.4.1.2011.6.148.1.9.1.2 | ColumnhwXdslReversePoweringFaultCauseActivefailure | read-only | current | Failed reverse-powering causes the activation failure. Options: 1. yes(1) - The port activation fails due to failed reverse power supply. 2. no(2) - The port a… |
| 1.3.6.1.4.1.2011.6.148.1.9.1.3 | ColumnhwXdslReversePoweringCurrent | read-only | current | Indicate the port reverse powering current. The invalid value is 4294967295. Unit: mA. |
| 1.3.6.1.4.1.2011.6.148.1.9.1.4 | ColumnhwXdslReversePoweringVoltage | read-only | current | Indicate the port reverse powering voltage. The invalid value is 4294967295. Unit: 0.1V. |
| 1.3.6.1.4.1.2011.6.148.1.9.1.5 | ColumnhwXdslReversePoweringPower | read-only | current | Indicate the port reverse powering power. The invalid value is 4294967295. Unit: 0.01W. |
| 1.3.6.1.4.1.2011.6.148.1.10 | NodehwXdslADSLPtmDataPathConfig | |||
| 1.3.6.1.4.1.2011.6.148.1.10.1 | ScalarhwXdslADSLPtmDataPath | read-write | current | Enable/Disable the global ADSL PTM switch function. This object is defaulted disable(2). This configuration will take effect after port manually reactivated or… |
| 1.3.6.1.4.1.2011.6.148.1.11 | NodehwXdslBoardConnectorMappingConfig | |||
| 1.3.6.1.4.1.2011.6.148.1.11.1 | ScalarhwXdslBoardConnectorMapping | read-write | current | This parameter specifies the xdsl board connector mapping mode. The parameter can take three values 1 and 2. Warning: VDSL board will be reset after this node … |
| 1.3.6.1.4.1.2011.6.148.1.12 | NodehwXdslProfileTransmodeAuto | |||
| 1.3.6.1.4.1.2011.6.148.1.12.1 | ScalarhwXdslProfileTransmodeAutoAdapt | read-write | current | Enable/Disable the profile transmode auto adapt switch. This object is defaulted disable(1). Options: 1. disable(1) - Disable the profile transmode auto adapt … |
| 1.3.6.1.4.1.2011.6.148.1.13 | NodehwXdslPortFrequentRetrainControlDefaultCfg | |||
| 1.3.6.1.4.1.2011.6.148.1.13.1 | ScalarhwXdslPortFrequentRetrainDefaultControlDefaultTimes | read-write | current | The times that xDSL port frequent retrain. Values of this node are default values of the hwXdslPortFrequentRetrainControlTimes node. The invalid value is 42949… |
| 1.3.6.1.4.1.2011.6.148.1.13.2 | ScalarhwXdslPortFrequentRetrainDefaultControlDefaultPolicy | read-write | current | The control policy that xDSL port frequent retrain. Values of this node are default values of the hwXdslPortFrequentRetrainControlPolicy node. Options: 1. lock… |
| 1.3.6.1.4.1.2011.6.148.1.13.3 | ScalarhwXdslPortFrequentRetrainControlDefaultPostponedTime | read-write | current | The postponed time when control policy of xDSL port frequent retrain is postponed. Values of this node are default values of the hwXdslPortFrequentRetrainContr… |
| 1.3.6.1.4.1.2011.6.148.1.13.4 | ScalarhwXdslPortFrequentRetrainControlDefaultFurtherCtrlCfg | read-write | current | Further control policy for frequent retrain. Values of this node are default values of the hwXdslPortFrequentRetrainControlFurtherControlCfg node. Options: 1. … |
| 1.3.6.1.4.1.2011.6.148.1.13.5 | ScalarhwXdslPortFrequentRetrainControlDefaultFurtherCtrlDetectPeriod | read-write | current | Detection period of the further control policy for frequent retrain. Values of this node are default values of the hwXdslPortFrequentRetrainControlFurtherContr… |
| 1.3.6.1.4.1.2011.6.148.1.13.6 | ScalarhwXdslPortFrequentRetrainControlDefaultFurtherCtrlPolicy | read-write | current | Further control policy for frequent retrain. Values of this node are default values of the hwXdslPortFrequentRetrainControlFurtherControlPolicy node. Options: … |
| 1.3.6.1.4.1.2011.6.148.1.14 | NodehwXdslUpboEleM0CalculationConfig | |||
| 1.3.6.1.4.1.2011.6.148.1.14.1 | ScalarhwXdslUpboEleM0Calculation | read-write | current | This parameter specifies the method to calculate kl0 when ELE-M0 is used. The parameter can take two values 1, 2. Options: 1. proprietary(1) - ELE-M0 is VTU-O … |
| 1.3.6.1.4.1.2011.6.148.1.15 | NodehwXdslCellheadCompressConfig | |||
| 1.3.6.1.4.1.2011.6.148.1.15.1 | ScalarhwXdslCellheadCompresscfg | read-write | current | Enable/Disable the nitro switch function. This object is defaulted disable(2). Options: 1. enable(1) - Enable the nitro switch function 2. disable(2) - Disable… |
| 1.3.6.1.4.1.2011.6.148.1.16 | NodehwXdslGfastFastRestartConfig | |||
| 1.3.6.1.4.1.2011.6.148.1.16.1 | ScalarhwXdslGfastFastRestartMode | read-write | current | Enable/Disable the G.fast fast restart switch function. This object is defaulted disable(2). Options: 1. enable(1) - Enable the G.fast fast restart switch func… |
| 1.3.6.1.4.1.2011.6.148.1.17 | NodehwXdslGfastPowerAutoAllocationConfig | |||
| 1.3.6.1.4.1.2011.6.148.1.17.1 | ScalarhwXdslGfastPowerAutoAllocation | read-write | current | Enable/Disable the G.fast power auto allocation switch. Warning: this operation will reactivate all the G.fast ports. This object is defaulted disable(1). Opti… |
| 1.3.6.1.4.1.2011.6.148.1.18 | NodehwXdslBypassRelayModeConfig | |||
| 1.3.6.1.4.1.2011.6.148.1.18.1 | ScalarhwXdslBypassRelayMode | read-write | current | Enable/Disable the Xdsl bypass relay mode. This object is defaulted enable(1). Options: 1. enable(1) - Indicates that the Xdsl bypass relay mode is enabled 2. … |
| 1.3.6.1.4.1.2011.6.148.1.19 | NodehwXdslGfastCableOptimizationConfig | |||
| 1.3.6.1.4.1.2011.6.148.1.19.1 | ScalarhwXdslGfastCableOptimization | read-write | current | Enable/Disable the G.fast cable optimization switch. This object is defaulted disable(2). Options: 1. enable(1) - Indicates that the G.fast cable optimization … |
| 1.3.6.1.4.1.2011.6.148.1.19.2 | ScalarhwXdslGfastCableOptimizationCableType | read-write | current | Description: Cable type. Default values: TP100 Options: 1. atis(1) - ATIS 2. quad(2) - Quad 3. paperInsulated(3) - Paper Insulated 4. tp100(4) - TP100 5. other… |
| 1.3.6.1.4.1.2011.6.148.2 | NodehwXdslTrapsVbOids | |||
| 1.3.6.1.4.1.2011.6.148.2.1 | ScalarhwXdslDynamicCollectResult | accessible-for-notify | current | Dynamic information collecting result. Options: 1. noFail(0) - The dynamic info has been collected successful 2. memFull(1) - The memory used for dynamic info … |
| 1.3.6.1.4.1.2011.6.148.2.2 | ScalarhwXdslDynamicCollectTime | accessible-for-notify | current | Time of the Dynamic information file. |
| 1.3.6.1.4.1.2011.6.148.2.3 | ScalarhwXdslRequestID | accessible-for-notify | current | Request ID. |
| 1.3.6.1.4.1.2011.6.148.2.4 | ScalarhwXdslSeltCompleteResult | accessible-for-notify | current | Selt test complete result. Options: 1. success(1) - Selt test is successful 2. fail(2) - Failed in selt test |
| 1.3.6.1.4.1.2011.6.148.2.5 | ScalarhwAdslProfIDType | accessible-for-notify | current | Type of the adsl template ID. Options: 1. lineTemplate(1) - Indicates line template ID 2. alarmTemplate(2) - Indicates alarm template ID 3. extProfile(3) - Ind… |
| 1.3.6.1.4.1.2011.6.148.2.6 | ScalarhwXdslProfName | accessible-for-notify | current | The name of the XDSL profile. |
| 1.3.6.1.4.1.2011.6.148.2.7 | ScalarhwXdslPortActualUpRate | accessible-for-notify | current | Xdsl port actual upstream rate. |
| 1.3.6.1.4.1.2011.6.148.2.8 | ScalarhwXdslPortActualDownRate | accessible-for-notify | current | Xdsl port actual downstream rate. |
| 1.3.6.1.4.1.2011.6.148.2.9 | ScalarhwXdslDelProfIndex | accessible-for-notify | current | Index of the profile which is deleted. If you delete all the profiles unused, this parameter will be 0xffffffff. |
| 1.3.6.1.4.1.2011.6.148.2.10 | ScalarhwXdslDelProfName | accessible-for-notify | current | Name of the profile which is deleted. If you delete all the profiles unused, this parameter will be a zero string. |
| 1.3.6.1.4.1.2011.6.148.2.11 | ScalarhwXdslSeltTestStartResult | accessible-for-notify | current | XDSL selt test start result. Options: 1. normal(1) - This notification indicates that a SELT task has been started successfully 2. failed(2) - This notificatio… |
| 1.3.6.1.4.1.2011.6.148.2.12 | ScalarhwXdslPortStatusInfoCollectResult | accessible-for-notify | current | Indicates the status of running line information collection. Options: 1. noFail(0) - The running line information has been collected successfully. 2. memFull(1… |
| 1.3.6.1.4.1.2011.6.148.3 | NodehwXdslTraps | |||
| 1.3.6.1.4.1.2011.6.148.3.1 | NodehwXdslCommonTraps | |||
| 1.3.6.1.4.1.2011.6.148.3.1.0 | NodehwXdslCommonTrapsPrefix | |||
| 1.3.6.1.4.1.2011.6.148.3.1.0.1 | NotificationhwXdslDynamicCollectInfoTrap | current | XDSL dynamic collect trap. This trap message is generated when XDSL dynamic collected. | |
| 1.3.6.1.4.1.2011.6.148.3.1.0.2 | NotificationhwXdslSeltCompleteResultTrap | current | Selt test complete result trap. This trap message is generated when selt test completed. | |
| 1.3.6.1.4.1.2011.6.148.3.1.0.3 | NotificationhwAdslProfIDChangeTrap | current | Adsl profile ID change trap. This trap message is generated when adsl profile ID changed. | |
| 1.3.6.1.4.1.2011.6.148.3.1.0.4 | NotificationhwXdslProfDeleteTrap | current | This trap message is generated when Xdsl unused profile trap deleted. | |
| 1.3.6.1.4.1.2011.6.148.3.1.0.5 | NotificationhwXdslSeltStartResultTrap | current | XDSL selt test start trap. This notification indicates trap when xDSL selt test start. | |
| 1.3.6.1.4.1.2011.6.148.3.1.0.6 | NotificationhwXdslPortStatusInfoCollectTrap | current | This trap is generated when running line information collections is complete. | |
| 1.3.6.1.4.1.2011.6.148.3.2 | NodehwXdslAlarmTraps | |||
| 1.3.6.1.4.1.2011.6.148.3.2.0 | NodehwXdslAlarmTrapsPrefix | |||
| 1.3.6.1.4.1.2011.6.148.3.2.0.1 | NotificationhwXdslAutoDeactivateLackLicensesAlarmTrap | current | This trap message is generated when some xDSL ports or all the xDSL ports are automatically deactivated due to lack of licenses. | |
| 1.3.6.1.4.1.2011.6.148.3.2.0.2 | NotificationhwXdslPortActRateLowerThresholdAlarmTrap | current | This trap message is generated when the activation rate of the xDSL line is lower than the threshold. | |
| 1.3.6.1.4.1.2011.6.148.3.2.0.3 | NotificationhwXdslPortReversePoweringFaultAlarmTrap | current | This trap message is generated when the reverse power supply fails or undervoltage occurs on the port. | |
| 1.3.6.1.4.1.2011.6.148.3.2.0.4 | NotificationhwXdslPortReversePoweringNormalAlarmTrap | current | This trap message is generated when the reverse power supply recovers. | |
| 1.3.6.1.4.1.2011.6.148.3.2.0.5 | NotificationhwXdslPortUnableToUpAfterPortAutoResetAlarmTrap | current | This trap message is generated when the port is unable to active after port auto reset. | |
| 1.3.6.1.4.1.2011.6.148.3.2.0.6 | NotificationhwXdslPortReactivateAfterPortResetRecoveryTrap | current | This trap message is generated when the port is back to activated after port auto reset. |