MIB Viewer

HUAWEI-XPON-COMMON-MIB

909 objects
The MIB is used for defining Huawei's GPON management common MIB objects for both profile-mode and distributing-mode.
Imported Objects
HUAWEI-DEVICE-MIBhwFrameIndex hwSlotIndex
HUAWEI-MIBhuaweiMgmt huaweiUtility
IF-MIB-- RFC 4001 ifIndex
INET-ADDRESS-MIBInetAddress InetAddressType
RMON-MIBEntryStatus OwnerString
SNMPv2-CONFMODULE-COMPLIANCE OBJECT-GROUP
SNMPv2-SMICounter32 Counter64 Gauge32 Integer32 IpAddress mib-2 MODULE-IDENTITY NOTIFICATION-TYPE OBJECT-TYPE Unsigned32 zeroDotZero
SNMPv2-TCDateAndTime MacAddress RowStatus TEXTUAL-CONVENTION TruthValue
OIDNameAccessStatusDescription
1.3.6.1.4.1.2011.6.145IdentityhwXponCommonMIBofThe MIB is used for defining Huawei's GPON management common MIB objects for both profile-mode and distributing-mode.
1.3.6.1.4.1.2011.6.145.1NodehwXponCommonObjectMIB
1.3.6.1.4.1.2011.6.145.1.1NodehwXponCommonObjects
1.3.6.1.4.1.2011.6.145.1.1.1NodehwXponCommonControlObjects
1.3.6.1.4.1.2011.6.145.1.1.1.1TablehwGponDeviceOntVoipCfgFileInfoTablenot-accessiblecurrentThe hwGponDeviceOntVoipCfgFileInfoTable is used to query the version information and validation status of the ONT voice configuration file. The indexes of this…
1.3.6.1.4.1.2011.6.145.1.1.1.1.1RowhwGponDeviceOntVoipCfgFileInfoEntrynot-accessiblecurrentThe hwGponDeviceOntVoipCfgFileInfoTable is used to query the version information and validation status of the ONT voice configuration file. The indexes of this…
1.3.6.1.4.1.2011.6.145.1.1.1.1.1.1ColumnhwGponDeviceOntObjIndexnot-accessiblecurrentONT ID, range: 0-127.
1.3.6.1.4.1.2011.6.145.1.1.1.1.1.2ColumnhwGponDeviceOntVoipCfgFileStateread-onlycurrentONT VOIP configuration file state. Options: 1. inactive(1) - Configuration retrieval has not been attempted 2. active(2) - Configuration was retrieved 3. initi…
1.3.6.1.4.1.2011.6.145.1.1.1.1.1.3ColumnhwGponDeviceOntVoipCfgFileVersionread-onlycurrentONT VOIP file version.
1.3.6.1.4.1.2011.6.145.1.1.1.1.1.4ColumnhwGponDeviceOntVoipFtpCfgResultread-onlycurrentQuery the failed alarm information of config XML file. Options: 1. success(0) - The ONT configuration is successful 2. resolvefail(1) - Failed to resolve the c…
1.3.6.1.4.1.2011.6.145.1.1.1.2TablehwGponDeviceOntPotsPortStateTablenot-accessiblecurrentQuery the state of ONT POTS port table.The table is used to query the state of ONT POTS port. The indexes of this table are ifIndex, hwGponDeviceOntObjIndex an…
1.3.6.1.4.1.2011.6.145.1.1.1.2.1RowhwGponDeviceOntPotsPortStateEntrynot-accessiblecurrentQuery the state of ONT POTS port table.The table is used to query the state of ONT POTS port. The indexes of this entry are ifIndex, hwGponDeviceOntObjIndex an…
1.3.6.1.4.1.2011.6.145.1.1.1.2.1.1ColumnhwGponDeviceOntPotsPortIdnot-accessiblecurrentONT POTS port ID.
1.3.6.1.4.1.2011.6.145.1.1.1.2.1.2ColumnhwGponDeviceOntPotsPortPTPSrvStateread-onlycurrentONT POTS port physics running state. Options: 1. normal(1) - Normal state 2. fail(2) - Fail state 3. invalidState(-1) - Returned in case of query failure or er…
1.3.6.1.4.1.2011.6.145.1.1.1.2.1.3ColumnhwGponDeviceOntPotsPortPTPAdminStateread-onlycurrentONT POTS port physics admin state. Options: 1. lock(1) - All user functions of this circuit pack are blocked, and alarm for this managed entity are no longer g…
1.3.6.1.4.1.2011.6.145.1.1.1.2.1.4ColumnhwGponDeviceOntPotsPortPTPHookStateread-onlycurrentONT POTS port physics hook state. Options: 1. onHook(1) - ONT POTS port physics is onHook 2. offHook(2) - ONT POTS port physics is offHook 3. invalidState(-1) …
1.3.6.1.4.1.2011.6.145.1.1.1.2.1.5ColumnhwGponDeviceOntPotsPortCTPSrvStateread-onlycurrentONT POTS port service running state. Options: 1. noneOrinitial(1) - None or initial state 2. registered(2) - Registered state 3. inSession(3) - In session 4. f…
1.3.6.1.4.1.2011.6.145.1.1.1.2.1.6ColumnhwGponDeviceOntPotsPortCTPSrvTyperead-onlycurrentONT POTS port service type. Options: 1. idleOrnone(1) - Idle or none type 2. twoWay(2) - Two way type 3. threeWay(3) - Three way type 4. fax(4) - Fax type 5. t…
1.3.6.1.4.1.2011.6.145.1.1.1.2.1.7ColumnhwGponDeviceOntPotsPortCTPSrvCoderead-onlycurrentONT POTS port code mode. Options: 1. pcmu(1) - Audio data is encoded as eight bits per sample, after logarithmic scaling. PCMU denotes mu-law scaling 2. reserv…
1.3.6.1.4.1.2011.6.145.1.1.1.3TablehwXponOntFileTransmitionTablenot-accessiblecurrentThis is ONT file transmission table. This table is used to transmit the config or diagnose files between BMS and ONU. The indexes of this table are ifIndex, hw…
1.3.6.1.4.1.2011.6.145.1.1.1.3.1RowhwXponOntFileTransmitionEntrynot-accessiblecurrentThis is ONT file transmission table. This table is used to transmit the config or diagnose files between BMS and ONU. The indexes of this entry are ifIndex, hw…
1.3.6.1.4.1.2011.6.145.1.1.1.3.1.1ColumnhwXponOntIndexnot-accessiblecurrentONT ID, range: 0-254.
1.3.6.1.4.1.2011.6.145.1.1.1.3.1.2ColumnhwXponOntTransmittingSerialNonot-accessiblecurrentThe serial number of transmission.
1.3.6.1.4.1.2011.6.145.1.1.1.3.1.3ColumnhwXponOntTransmittingFileValueread-writecurrentThe file to be transmitted.
1.3.6.1.4.1.2011.6.145.1.1.1.3.1.4ColumnhwXponOntTransmittingFileLengthread-writecurrentThe length of the file to be transmitted.
1.3.6.1.4.1.2011.6.145.1.1.1.3.1.5ColumnhwXponOntTransmittingFreeread-writecurrentThis object is used to free ONT transmitting buffer. Options: 1. clear(1) - Execute to free ONT transmitting buffer. 2. invalid(-1) - Indicates that the query …
1.3.6.1.4.1.2011.6.145.1.1.1.4TablehwXponOntInfoTablenot-accessiblecurrentThe ont info table. This table is used to query the ont information. The indexes of this table are ifIndex and hwXponOntIndex.
1.3.6.1.4.1.2011.6.145.1.1.1.4.1RowhwXponOntInfoEntrynot-accessiblecurrentThe ont info table. This table is used to query the ont information. The indexes of this entry are ifIndex and hwXponOntIndex.
1.3.6.1.4.1.2011.6.145.1.1.1.4.1.1ColumnhwXponOntInfoOnlineDurationread-onlycurrentThe one-time online duration of the ONT. Unit: second
1.3.6.1.4.1.2011.6.145.1.1.1.4.1.2ColumnhwXponOntInfoMemoryOccupationread-onlycurrentThe Memory occupation of the ONT, range: 0-100.
1.3.6.1.4.1.2011.6.145.1.1.1.4.1.3ColumnhwXponOntInfoCpuOccupationread-onlycurrentThe CPU occupation of the ONT, range: 0-100.
1.3.6.1.4.1.2011.6.145.1.1.1.4.1.4ColumnhwXponOntInfoTemperatureread-onlycurrentThe temperature of the ONT. Unit: degree centigrade
1.3.6.1.4.1.2011.6.145.1.1.1.4.1.5ColumnhwXponOntInfoProductDescriptionread-onlycurrentThe product description of the ONT.
1.3.6.1.4.1.2011.6.145.1.1.1.4.1.6ColumnhwXponDeviceOntControlPrimaryStatusread-onlycurrentThe primary status of the Board.This parameter indicates the current overall service condition of an entity, i.e., whether it is in-service or out-of-service. …
1.3.6.1.4.1.2011.6.145.1.1.1.4.1.7ColumnhwXponDeviceOntControlSecondaryStatusread-onlycurrentThis parameter indicates the secondary status of the board. The parameter provides additional information pertaining to PST and PSTQ. For example, it may indic…
1.3.6.1.4.1.2011.6.145.1.1.1.4.1.8ColumnhwXponOntInfoCfgFileCrcread-onlycurrentThe CRC value of the ONT.
1.3.6.1.4.1.2011.6.145.1.1.1.4.1.9ColumnhwXponOntInfoAppLoadStateread-onlycurrentThe state of the app load for ONT. 0x01 initstate 0x02 process %0 0x03 ftp load fail 0x04 loaded to mainboard process %10 0x05 loaded to ponboard process %20 0…
1.3.6.1.4.1.2011.6.145.1.1.1.4.1.10ColumnhwXponOntInfoXmlLoadStateread-onlycurrentThe state of the xml load for ONT. 0x01 initstate 0x02 process %0 0x03 ftp load fail 0x04 loaded to mainboard process %10 0x05 loaded to ponboard process %20 0…
1.3.6.1.4.1.2011.6.145.1.1.1.4.1.11ColumnhwXponOntInfoSupportXmlVersionread-onlycurrentThe xml version that the ONT supports, it is a V.R.C.SP string.
1.3.6.1.4.1.2011.6.145.1.1.1.4.1.12ColumnhwXponOntLastDistanceread-onlycurrentThe last ranging value of the ONT. Unit: m Options: 1. invalid (-1) - Indicates that the query fails or no information is detected.
1.3.6.1.4.1.2011.6.145.1.1.1.4.1.13ColumnhwXponOntInfoNoOnLineReasonread-onlycurrentThis object indicates the reason why the ONT goes offline. The value (1) indicates that there is no third-party ONT interoperability certification. The value (…
1.3.6.1.4.1.2011.6.145.1.1.1.4.1.14ColumnhwXponOntInfoXmlLoadErrorInforead-onlycurrentIndicates the error information when the ONT XML configuration fails to be loaded.
1.3.6.1.4.1.2011.6.145.1.1.1.4.1.15ColumnhwXponOntInfoInteroperabilityStandardread-onlycurrentThe interoperability mode of the ONT. Options: 1. ituT(1) - Indicates that the interoperability standard of the ONT is ituT 2. ctc(2) - Indicates that the inte…
1.3.6.1.4.1.2011.6.145.1.1.1.4.1.16ColumnhwGponDeviceOntObjectExtendFrameIDread-onlycurrentExtend Frame ID. The issued value (-1) of Extend Frame ID indicates that the ONT is not specified to any Extend Frame.
1.3.6.1.4.1.2011.6.145.1.1.1.4.1.17ColumnhwXponOntInfoUsedMutualAuthread-onlycurrentIndicates whether the ONT uses mutual authentication. Options: 1. yes (1) -Indicates the ONT uses mutual authentication. 2. no (2) -Indicates the ONT does not …
1.3.6.1.4.1.2011.6.145.1.1.1.4.1.18ColumnhwXponOntInfoPowerReductionStatusread-onlycurrentIndicates whether the ONT is in power reduction state and its actual power reduction state. Options: 1. normal(1) -It means the ONT is in normal state,it is ru…
1.3.6.1.4.1.2011.6.145.1.1.1.4.1.19ColumnhwXponOntInfoNniPhysicalUpRateread-onlycurrentThis object indicates the upstream physical rate negotiated between the ONT and OLT. Unit: Kbps For example, The upstream physical rate of the ONT is 1,000,000…
1.3.6.1.4.1.2011.6.145.1.1.1.4.1.20ColumnhwXponOntInfoNniPhysicalDownRateread-onlycurrentThis object indicates the downstream physical rate negotiated between the ONT and OLT. Unit: Kbps For example, The downstream physical rate of the ONT is 1,000…
1.3.6.1.4.1.2011.6.145.1.1.1.4.1.21ColumnhwGponDeviceOntActualNniTyperead-onlycurrentIndicates whether the actual NNI type of the ont. Options: 1. rate2dot5G1dot25G(1) -Downstream rate 2.5Gbps, upstream rate 1.25Gbps. 2. rate10G2dot5G (2) -Down…
1.3.6.1.4.1.2011.6.145.1.1.1.4.1.22ColumnhwGponDeviceOntLastActualNniTyperead-onlycurrentIndicates whether the last actual NNI type of the ont. Options: 1. rate2dot5G1dot25G(1) -Downstream rate 2.5Gbps, upstream rate 1.25Gbps. 2. rate10G2dot5G (2) …
1.3.6.1.4.1.2011.6.145.1.1.1.4.1.23ColumnhwXponOntInfoHostNameread-onlycurrentThe host name of the ONT.
1.3.6.1.4.1.2011.6.145.1.1.1.4.1.24ColumnhwXponOntFecStatusread-onlycurrentThis object indicates the ONT FEC switch status. Options: 1. enable(1) - Indicates that the ONT FEC switch is enabled. 2. disable(2) - Indicates that the ONT F…
1.3.6.1.4.1.2011.6.145.1.1.1.4.1.25ColumnhwGponXponOntVsIDread-onlycurrentThis object indicates the indexes of virtual system,range: 0-3. The invalid value is -1.
1.3.6.1.4.1.2011.6.145.1.1.1.4.1.26ColumnhwGponXponGlobalOntIDread-onlycurrentThis object indicates the Global ONT ID in system, range: 0-255. The invalid value is -1.
1.3.6.1.4.1.2011.6.145.1.1.1.4.1.27ColumnhwGponDeviceOntActualWorkChannelread-onlycurrentIndicates the actual work channel of the ont.
1.3.6.1.4.1.2011.6.145.1.1.1.4.1.28ColumnhwXponOntInfoPowerTyperead-onlycurrentThis object indicates the power type of the ONT. Options: 1. dc(1) - Indicates that the ONT power type is DC. 2. ac(2) - Indicates that the ONT power type is A…
1.3.6.1.4.1.2011.6.145.1.1.1.4.1.29ColumnhwXponOntInfoSystemUpDurationread-onlycurrentThe system up duration of the ONT. Unit: second
1.3.6.1.4.1.2011.6.145.1.1.1.5TablehwXponOntIpMaintainTablenot-accessiblecurrentThe ONT IP maintain table. This table is used to config the ONT. The indexes of this table are ifIndex hwXponOntIndex and hwXponOntIpMaintainIndex.
1.3.6.1.4.1.2011.6.145.1.1.1.5.1RowhwXponOntIpMaintainEntrynot-accessiblecurrentThe ONT IP maintain table. This table is used to config the ONT. The indexes of this entry are ifIndex hwXponOntIndex and hwXponOntIpMaintainIndex.
1.3.6.1.4.1.2011.6.145.1.1.1.5.1.1ColumnhwXponOntIpMaintainIndexnot-accessiblecurrentThe IP index of the ont IP host.
1.3.6.1.4.1.2011.6.145.1.1.1.5.1.2ColumnhwXponOntIpRemotePingIpAddressread-writecurrentThe destination IP address of the ONT ping.
1.3.6.1.4.1.2011.6.145.1.1.1.5.1.3ColumnhwXponOntIpRemotePingSourceIpAddressread-writecurrentThe source IP address of the ONT ping.
1.3.6.1.4.1.2011.6.145.1.1.1.6TablehwXponPortInfoTablenot-accessiblecurrentXPON port Info table. This table is used to query the port information. The index of this table is ifIndex.
1.3.6.1.4.1.2011.6.145.1.1.1.6.1RowhwXponPortInfoEntrynot-accessiblecurrentXPON port Info table. This table is used to query the port information. The index of this entry is ifIndex.
1.3.6.1.4.1.2011.6.145.1.1.1.6.1.1ColumnhwXponPortSignalDetectread-onlycurrentQuery the signal detect info of the port. Options: 1. normal(1) - Optical signals are detected 2. fault(2) - Optical signals are not detected 3. unsupport(255)…
1.3.6.1.4.1.2011.6.145.1.1.1.6.1.2ColumnhwXponPortMacChipStateread-onlycurrentQuery the mac chipset state info of the port. Options: 1. normal(1) - The XPON MAC chipset is normal 2. fail(2) - The XPON MAC chipset is fault
1.3.6.1.4.1.2011.6.145.1.1.1.6.1.3ColumnhwXponPortOtdrCapabilityread-onlycurrentThis object indicates whether the optical module supports the OTDR test. Options: 1. support(1) - Indicates that the optical module supports the OTDR test. 2. …
1.3.6.1.4.1.2011.6.145.1.1.1.6.1.4ColumnhwXponPortOpticalModulePhysicalFormread-onlycurrentThis object indicates the optical module physical form. Options: 1. single(1) - GPON, EPON, XG-PON, XGS-PON, 10G EPON 2. combointegrated(2) - Integrated Combo …
1.3.6.1.4.1.2011.6.145.1.1.1.6.1.5ColumnhwXponPortPhysicalUpRateread-onlycurrentThis object indicates the upstream physical rate negotiated between the port and OLT. Unit: Kbps. The invalid value is -1.
1.3.6.1.4.1.2011.6.145.1.1.1.6.1.6ColumnhwXponPortPhysicalDownRateread-onlycurrentThis object indicates the downstream physical rate negotiated between the port and OLT. Unit: Kbps. The invalid value is -1.
1.3.6.1.4.1.2011.6.145.1.1.1.7TablehwXponOntBatchInfoTablenot-accessiblecurrentThis table is used to query the ont run state, config state, admin state, load state, equipment ID, software version, system status, CRC value and offline reas…
1.3.6.1.4.1.2011.6.145.1.1.1.7.1RowhwXponOntBatchInfoEntrynot-accessiblecurrentThis table is used to query the ont run state, config state, admin state, load state, equipment ID, software version, system status, CRC value and offline reas…
1.3.6.1.4.1.2011.6.145.1.1.1.7.1.1ColumnhwXponOntBatchQueryIndexnot-accessiblecurrentThe object indicates the index of the table hwXponOntBatchInfoTable.
1.3.6.1.4.1.2011.6.145.1.1.1.7.1.2ColumnhwXponOntBatchQueryItemMaskread-writecurrentThe items of ont status need query, include ont run state, config state, admin state, app load state, xml load state, equipment ID, software version, system st…
1.3.6.1.4.1.2011.6.145.1.1.1.7.1.3ColumnhwXponOntBatchQueryListread-writecurrentThe object indicates the ONT list, and each ONT takes 4 bytes, include frame(4bit), slot(6bit), port(6bit) and ontid(16bits) and the most number of ONT is 1024.
1.3.6.1.4.1.2011.6.145.1.1.1.7.1.4ColumnhwXponOntBatchQueryInforead-onlycurrentThe value of ont status: run state(1byte) : 1-online,2-offline,255-invalid config state(1byte) : 1-init,2-normal,3-fail,4-noresume,5-config,255-invalid admin s…
1.3.6.1.4.1.2011.6.145.1.1.1.8TablehwXponOntPppoeSimuTestInfoTablenot-accessiblecurrentThis table is used for the PPPoE testing. The index of this table is a combination of ifIndex and hwXponOntIndex.
1.3.6.1.4.1.2011.6.145.1.1.1.8.1RowhwXponOntPppoeSimuTestInfoEntrynot-accessiblecurrentThis table is used for the PPPoE testing. The index of this entry is a combination of ifIndex and hwXponOntIndex.
1.3.6.1.4.1.2011.6.145.1.1.1.8.1.1ColumnhwXponOntPppoeSimuPortIDread-writecurrentThe object indicates the type and ID of the ONT port. port type(2 bytes) + port ID(2 bytes). The OLT supports port type 0 for an ETH port to be compatible with…
1.3.6.1.4.1.2011.6.145.1.1.1.8.1.2ColumnhwXponOntPppoeSimuOuterCVlanIDread-writecurrentThe object indicts the vlan ID, GPON : 0 - 4095; EPON : 1 - 4094; the value -1 indicts that the query fails.
1.3.6.1.4.1.2011.6.145.1.1.1.8.1.3ColumnhwXponOntPppoeOuterSimuCVlanPriread-writecurrentThe priority of vlan.
1.3.6.1.4.1.2011.6.145.1.1.1.8.1.4ColumnhwXponOntPppoeSimuPppoeUsernameread-writecurrentThe user name of PPPoE test.
1.3.6.1.4.1.2011.6.145.1.1.1.8.1.5ColumnhwXponOntPppoeSimuPppoePasswordread-writecurrentThe password of PPPoE test.
1.3.6.1.4.1.2011.6.145.1.1.1.8.1.6ColumnhwXponOntPppoeSimuPppoeAuthProtocolread-writecurrentThe protocol type of PPPoE test. Options: 1. chap (1) - The protocol type of PPPoE test is chap. 2. pap (2) - The protocol type of PPPoE test is pap. 3. invali…
1.3.6.1.4.1.2011.6.145.1.1.1.8.1.7ColumnhwXponOntPppoeSimuSwitchread-writecurrentThe object is used to start or stop the PPPoE test. Options: 1. start (1) - Start the PPPoE test. 2. stop (2) - Stop the PPPoE test. 3. invalid (-1) - Indicate…
1.3.6.1.4.1.2011.6.145.1.1.1.8.1.8ColumnhwXponOntPppoeSimuMulticastGroupIPTyperead-writecurrentIndicates the address type. Options: 1. unknown(0) - An unknown address type. This value MUST be used if the value of the corresponding InetAddress object is a…
1.3.6.1.4.1.2011.6.145.1.1.1.8.1.9ColumnhwXponOntPppoeSimuMulticastGroupIPread-writecurrentIndicates the group IP address of the program. The format of this index is consistent with that of the address type. The default value is 0.0.0.0.
1.3.6.1.4.1.2011.6.145.1.1.1.8.1.10ColumnhwXponOntPppoeSimuMulticastVersionread-writecurrentIndicates the multicast version in the ONT Multicast simulation instance. Options: 1. igmpV2(1) - Indicates the multicast version is IGMPV2. 2. igmpV3(2) - Ind…
1.3.6.1.4.1.2011.6.145.1.1.1.8.1.11ColumnhwXponOntPppoeSimuMulticastSourceIPTyperead-writecurrentIndicates the address type. Options: 1. unknown(0) - An unknown address type. This value MUST be used if the value of the corresponding InetAddress object is a…
1.3.6.1.4.1.2011.6.145.1.1.1.8.1.12ColumnhwXponOntPppoeSimuMulticastSourceIPread-writecurrentIndicates the source IP address of the program. The format of this index is consistent with that of the address type. The default value is 0.0.0.0.
1.3.6.1.4.1.2011.6.145.1.1.1.8.1.13ColumnhwXponOntPppoeSimuMulticastDataRateread-onlycurrentIndicates the multicast date rate of the current simulation instance, it is valid when the simulation result is success. Unit: kbps. The invalid value is -1.
1.3.6.1.4.1.2011.6.145.1.1.1.9TablehwXponOntControlTablenot-accessiblecurrentThe hwXponOntControlTable is used to config the ONT. The indexes of this table are ifIndex and hwXponOntIndex.
1.3.6.1.4.1.2011.6.145.1.1.1.9.1RowhwXponOntControlEntrynot-accessiblecurrentThe hwXponOntControlTable is used to config the ONT. The indexes of this entry are ifIndex and hwXponOntIndex.
1.3.6.1.4.1.2011.6.145.1.1.1.9.1.1ColumnhwXponOntConfigFactoryConfigurationread-writecurrentThis parameter is used to restore the ONT to factory configuration. Options: 1. restore (1) - Restore 2. completelyrestore(2) - Completely restore 3. invalid (…
1.3.6.1.4.1.2011.6.145.1.1.1.9.1.2ColumnhwXponOntControlGracefulResetread-writecurrentThis parameter is used to reset the ONT gracefully. Options: 1. gracefullyreset (1) - Indicates that the ONT resets gracefully 2. invalid (-1) - Indicates the …
1.3.6.1.4.1.2011.6.145.1.1.1.9.1.3ColumnhwXponOntControlGraceTimeread-writecurrentThis parameter is used to specify the maximum time to wait for the ONT to reset gracefully. The default maximum time for wait is 14400 seconds. The invalid val…
1.3.6.1.4.1.2011.6.145.1.1.1.9.1.4ColumnhwXponOntDeleteVasServiceread-writecurrentDelete the vas service of the ONT. Options: 1. delete(1) - Delete the vas service of the ONT 2. invalid(-1) - invalid value
1.3.6.1.4.1.2011.6.145.1.1.1.9.1.5ColumnhwXponOntControlOperatorCheckResetread-writecurrentReset operator check code of the ONT. Options: 1. reset(1) - Reset operator check code of the ONT 2. invalid(-1) - Invalid value
1.3.6.1.4.1.2011.6.145.1.1.1.9.1.6ColumnhwXponOntControlRogueIsolateSwitchread-writecurrentThis object indicates the switch of isolating or de-isolating a rogue ONT. Options: 1. isolate(1) - Isolate the rogue ONT 2. undoIsolate(2) - Undo isolate the …
1.3.6.1.4.1.2011.6.145.1.1.1.9.1.7ColumnhwXponOntFecread-writecurrentThis object is used to configure the ONT upstream FEC switch. Options: 1. enable(1) - Indicates that the ONT FEC switch is enabled. 2. disable(2) - Indicates t…
1.3.6.1.4.1.2011.6.145.1.1.1.9.1.8ColumnhwXponOntControlWanAccessHttpread-writecurrentThis object is used to configure the ONT WAN Access of Web. Options: 1. enable(1) - Indicates that the ONT WAN Access of Web is enabled. 2. disable(2) - Indica…
1.3.6.1.4.1.2011.6.145.1.1.1.9.1.9ColumnhwXponOntControlLanAccessTelnetread-writecurrentThis object is used to configure the ONT LAN Access of Telnet. Options: 1. enable(1) - Indicates that the ONT LAN Access of Telnet is enabled. 2. disable(2) - …
1.3.6.1.4.1.2011.6.145.1.1.1.9.1.10ColumnhwXponOntControlRollbackSoftwareread-writecurrentThis parameter is used to rollback the software of the ONT. Options: 1. rollbacksoftware(1) - Indicates that the ONT software version rolls back. 2. invalid(-1…
1.3.6.1.4.1.2011.6.145.1.1.1.10TablehwGponOntPortMulticastVlanTranslationTablenot-accessiblecurrentThe hwGponOntPortMulticastVlanTranslationTable is used to config the multicast vlan translation of GPON ONT port. The indexes of this table are ifindex, hwGpon…
1.3.6.1.4.1.2011.6.145.1.1.1.10.1RowhwGponOntPortMulticastVlanTranslationEntrynot-accessiblecurrentThe hwGponOntPortMulticastVlanTranslationTable is used to config the multicast vlan translation of GPON ONT port. The indexes of this entry are ifindex, hwGpon…
1.3.6.1.4.1.2011.6.145.1.1.1.10.1.1ColumnhwGponOntifTypenot-accessiblecurrentThe ONT port type. Options: 1. vdsl(37) -The ONT port type is vdsl 2. wifi(40) -The ONT port type is wifi 3. eth(47) -The ONT port type is eth 4. ippath(61) -T…
1.3.6.1.4.1.2011.6.145.1.1.1.10.1.2ColumnhwGponOntifPortnot-accessiblecurrentThe ONT port ID.
1.3.6.1.4.1.2011.6.145.1.1.1.10.1.3ColumnhwGponOntPortMulticastVlanIndexnot-accessiblecurrentThe multicast vlan index of ONT port. Ranging from 1 to 4095.
1.3.6.1.4.1.2011.6.145.1.1.1.10.1.4ColumnhwGponOntPortMulticastVlanCfgTranslatedVlanread-writecurrentThe translation vlan of ONT port, when the GPON ONT port multicast vlan transmit mode is translation.
1.3.6.1.4.1.2011.6.145.1.1.1.10.1.5ColumnhwGponOntPortMulticastStripSwitchread-writecurrentThis object indicates the multicast vlan transmit mode of GPON ONT port. Options: 1. untag(1) - Indicates that the GPON ONT port multicast vlan transmit mode i…
1.3.6.1.4.1.2011.6.145.1.1.1.10.1.6ColumnhwGponOntPortMulticastVlanCfgRowStatusread-createcurrentRow status. This object is used to differentiate the creation, modification and deletion operations for an object. Options: 1. createAndGo(4) -create a new ins…
1.3.6.1.4.1.2011.6.145.1.1.1.12TablehwXponOntVoipConfigTablenot-accessiblecurrentThe hwXponOntVoipConfigTable is used to config the FTP Server and config the configuration files name. The indexes of this table are ifindex and hwXponOntIndex.
1.3.6.1.4.1.2011.6.145.1.1.1.12.1RowhwXponOntVoipConfigEntrynot-accessiblecurrentThe hwXponOntVoipConfigTable is used to config the FTP Server and config the configuration files name. The indexes of this entry are ifindex and hwXponOntIndex.
1.3.6.1.4.1.2011.6.145.1.1.1.12.1.1ColumnhwXponOntVoipUsedFtpServerProfileread-writecurrentThe server of used.
1.3.6.1.4.1.2011.6.145.1.1.1.12.1.2ColumnhwXponOntVoipFtpFileNameread-writecurrentThe configuration file name.
1.3.6.1.4.1.2011.6.145.1.1.1.12.1.3ColumnhwXponOntVoipFtpFileTriggerread-writecurrentThis leaf set 1 when config the FTP Server and config the configuration file name.
1.3.6.1.4.1.2011.6.145.1.1.1.12.1.4ColumnhwXponOntVoipConfigMethodread-writecurrentConfig tht ONT's voip service. Options: 1. default(1) - do not configure, ont default 2. omci(2) - OMCI 3. ftp(3) - configuration file retrieval 4. tr069(4) - …
1.3.6.1.4.1.2011.6.145.1.1.1.13TablehwXponOntConfigTablenot-accessiblecurrentThe hwXponOntConfigTable is used to config the ONT. The indexes of this table are ifIndex and hwXponOntIndex.
1.3.6.1.4.1.2011.6.145.1.1.1.13.1RowhwXponOntConfigEntrynot-accessiblecurrentThe hwXponOntConfigTable is used to config the ONT. The indexes of this entry are ifIndex and hwXponOntIndex.
1.3.6.1.4.1.2011.6.145.1.1.1.13.1.1ColumnhwXponOntUsedAlarmPolicyNameread-writecurrentThe name of alarm policy profile which used by the ONT.
1.3.6.1.4.1.2011.6.145.1.1.1.13.1.2ColumnhwXponOntPowerSheddingProfNameread-writecurrentThe name of the power shedding profile that is bound to the ONT.
1.3.6.1.4.1.2011.6.145.1.1.1.13.1.3ColumnhwXponOntUsedTr069ServerProfNameread-writecurrentThis object indicates the name of the tr069 service profile that is bound to the ONT.
1.3.6.1.4.1.2011.6.145.1.1.1.13.1.4ColumnhwXponOntUsedLldpProfNameread-writecurrentThis object indicates the name of the lldp profile that is bound to the ONT.
1.3.6.1.4.1.2011.6.145.1.1.1.13.1.5ColumnhwXponOntUsedDot1xProfNameread-writecurrentThis object indicates the name of the 802.1X profile that is bound to the ONT.
1.3.6.1.4.1.2011.6.145.1.1.1.13.1.6ColumnhwXponOntUsedPowerReductionProfNameread-writecurrentThis object indicates the name of the power reduction profile that is bound to the ONT.
1.3.6.1.4.1.2011.6.145.1.1.1.13.1.7ColumnhwXponOntUsedPolicyRouteProfileNameread-writecurrentThis object indicates the name of the policy route profile that is bound to the ONT.
1.3.6.1.4.1.2011.6.145.1.1.1.13.1.8ColumnhwXponOntUsedInternetWanIpIndexread-writecurrentThis object indicates the ip index of ont internet wan. value list:0~3, -1 means delete
1.3.6.1.4.1.2011.6.145.1.1.1.13.1.9ColumnhwXponOntUsedMulticastWanIpIndexread-writecurrentThis object indicates the ip index of ont Iptv wan. value list:0~3, -1 means delete
1.3.6.1.4.1.2011.6.145.1.1.1.13.1.10ColumnhwXponOntUsedMulticastProfileNameread-writecurrentThis object indicates the name of the multicast profile that is bound to the ONT.
1.3.6.1.4.1.2011.6.145.1.1.1.14TablehwXponOntWanInfoTablenot-accessiblecurrentThe hwXponOntWanInfoTable is used to query the information about WAN ports. The indexes of this table are ifIndex and hwXponOntIndex.
1.3.6.1.4.1.2011.6.145.1.1.1.14.1RowhwXponOntWanInfoEntrynot-accessiblecurrentThe hwXponOntWanInfoTable is used to query the information about WAN ports. The indexes of this entry are ifIndex and hwXponOntIndex.
1.3.6.1.4.1.2011.6.145.1.1.1.14.1.1ColumnhwXponOntWanInfoDetailread-onlycurrentThis object indicates the information about WAN ports.
1.3.6.1.4.1.2011.6.145.1.1.1.14.1.2ColumnhwXponOntWanExtendInfoDetailread-onlycurrentThis object indicates the information about WAN ports including IPv6 WAN. This object consists of length, version, the number of WAN ports (n) and n * WAN port…
1.3.6.1.4.1.2011.6.145.1.1.1.15TablehwGponPortControlTablenot-accessiblecurrentThe hwGponPortControlTable is used to config the information about ports. The index of this table is ifIndex.
1.3.6.1.4.1.2011.6.145.1.1.1.15.1RowhwGponPortControlEntrynot-accessiblecurrentThe hwGponPortControlTable is used to config the information about ports. The index of this entry is ifIndex.
1.3.6.1.4.1.2011.6.145.1.1.1.15.1.1ColumnhwGponPortControlDbaAssignModeread-writecurrentThis object is used to configure the DBA bandwidth assignment mode. Options: 1. maxbandwidthusage(1) - max bandwidth usage mode 2. minloopdelay(2) - min loop d…
1.3.6.1.4.1.2011.6.145.1.1.1.15.1.2ColumnhwGponPortControlPonIdSwitchread-writecurrentThis object is used to configure the PON-ID switch. Options: 1. enable(1) - Indicates that the PON-ID switch is enabled 2. disable(2) - Indicates that the PON-…
1.3.6.1.4.1.2011.6.145.1.1.1.15.1.3ColumnhwGponPortControlPonIdInputModeread-writecurrentThis object is used to configure the input mode of PON-ID identifier. Options: 1. text(1) - Indicates that the input mode of PON-ID identifier is text 2. hex(2…
1.3.6.1.4.1.2011.6.145.1.1.1.15.1.4ColumnhwGponPortControlPonIdIdentifierread-writecurrentThis object is used to configure the PON-ID identifier. The GPON port supports a maximum of 7 characters to be input for configuring the PON-ID identifier. The…
1.3.6.1.4.1.2011.6.145.1.1.1.15.1.5ColumnhwGponPortMulticastEncryptModeread-writecurrentThis object is used to configure the Multicast GEM Port encypt mode. Options: 1. disable(1) - Indicates that the Multicast GEM Port encypt mode is disable 2. e…
1.3.6.1.4.1.2011.6.145.1.1.1.15.1.6ColumnhwGponPortControlDbaSurplusAssignread-writecurrentThis object is used to configure the surplus bandwidth assignment swith. Options: 1. enable(1) - Indicates that the surplus bandwidth assignment is enable 2. d…
1.3.6.1.4.1.2011.6.145.1.1.1.15.1.7ColumnhwGponPortControlBEAssignModeread-writecurrentThis object is used to configure the best effort assign mode. Options: 1. rateProportion(1) - Indicates that the best effort assign mode is rate proportion 2. …
1.3.6.1.4.1.2011.6.145.1.1.1.15.1.8ColumnhwGponPortControlTrafficAlarmProfileNameread-writecurrentThis object indicates the traffic alarm profile name. This object is used to configure the traffic alarm profile. An empty string is used to unbind the traffic…
1.3.6.1.4.1.2011.6.145.1.1.1.15.1.9ColumnhwGponPortControlMaxGuaranteedBandwidthread-writecurrentThis object indicates the maximum guaranteed bandwidth, The value must be greater than or equal to 128 but cannot be larger than the maximum physical bandwidth…
1.3.6.1.4.1.2011.6.145.1.1.1.15.1.10ColumnhwGponPortControlWaveLengthIDread-writecurrentThis object indicates the wavelength of TWDM-PON port. Options: 1. waveLengthID0(0) - Indicates that the wavelength of TWDM-PON port is 1596.34nm. 2. waveLengt…
1.3.6.1.4.1.2011.6.145.1.1.1.16TablehwXponDeviceOntActiveAlarmTablenot-accessiblecurrentThe hwXponDeviceOntActiveAlarmTable is used to query the active alarm about ONT. The indexes of this table are ifIndex and hwXponOntIndex.
1.3.6.1.4.1.2011.6.145.1.1.1.16.1RowhwXponDeviceOntActiveAlarmEntrynot-accessiblecurrentThe hwXponDeviceOntActiveAlarmTable is used to query the active alarm about ONT. The indexes of this entry are ifIndex and hwXponOntIndex.
1.3.6.1.4.1.2011.6.145.1.1.1.16.1.1ColumnhwXponDeviceOntActiveAlarmNumread-onlycurrentThis object indicates the active alarm number about ONT.
1.3.6.1.4.1.2011.6.145.1.1.1.16.1.2ColumnhwXponDeviceOntActiveAlarmListread-onlycurrentThis object indicates the active alarm list about ONT. This list supports a maximum number of 100 ONT alarms and each alarm ID has 4 bytes
1.3.6.1.4.1.2011.6.145.1.1.1.16.1.3ColumnhwXponDeviceOntPortActiveAlarmNumread-onlycurrentThis object indicates active alarm number about ONT ports.
1.3.6.1.4.1.2011.6.145.1.1.1.16.1.4ColumnhwXponDeviceOntPortActiveAlarmListread-onlycurrentThis object indicates the active alarm list about ONT ports. This list supports a maximum number of 100 ONT alarms and each ONT port alarm has 6 bytes, includi…
1.3.6.1.4.1.2011.6.145.1.1.1.17TablehwXponOntIpConfigTablenot-accessiblecurrentThe ONT IP config table. This table is used to configure and query the IP configuration mode and IP address of an ONT. The indexes of this table are ifIndex, h…
1.3.6.1.4.1.2011.6.145.1.1.1.17.1RowhwXponOntIpConfigEntrynot-accessiblecurrentThe ONT IP config table. This table is used to configure and query the IP configuration mode and IP address of an ONT. The indexes of this entry are ifIndex, h…
1.3.6.1.4.1.2011.6.145.1.1.1.17.1.1ColumnhwXponOntIpIndexnot-accessiblecurrentThe IP index of the ont IP host.
1.3.6.1.4.1.2011.6.145.1.1.1.17.1.2ColumnhwXponOntIpConfigModeread-writecurrentIP configuration mode. Options: 1. dhcp(1) - Indicates the dynamic allocation mode 2. static(2) - Indicates the static allocation mode 3. nonOLTconfiguration(3…
1.3.6.1.4.1.2011.6.145.1.1.1.17.1.3ColumnhwXponOntIpConfigVlanread-writecurrentThe VLAN of ONT IP host. range: 0-4095
1.3.6.1.4.1.2011.6.145.1.1.1.17.1.4ColumnhwXponOntIpConfigPriorityread-writecurrentThe priority of ONT IP host. range: 0-7, 0xfe: dscp-mapping.
1.3.6.1.4.1.2011.6.145.1.1.1.17.1.5ColumnhwXponOntIpconfigDscpDefaultPriorityread-writecurrentThe default priority for dscp-mapping policy. range: 0-7
1.3.6.1.4.1.2011.6.145.1.1.1.17.1.6ColumnhwXponOntIpconfigDscpProfIndexread-writecurrentThe dscp profile index of the ONT ip host, and the range is 1~50
1.3.6.1.4.1.2011.6.145.1.1.1.17.1.7ColumnhwXponOntIpAddressread-writecurrentONT ip address.
1.3.6.1.4.1.2011.6.145.1.1.1.17.1.8ColumnhwXponOntNetMaskread-writecurrentSubnet mask.
1.3.6.1.4.1.2011.6.145.1.1.1.17.1.9ColumnhwXponOntNetGatewayread-writecurrentThe default network gateway.
1.3.6.1.4.1.2011.6.145.1.1.1.17.1.10ColumnhwXponOntMasterDNSread-writecurrentThe active DNS address.
1.3.6.1.4.1.2011.6.145.1.1.1.17.1.11ColumnhwXponOntSlaveDNSread-writecurrentThe slave DNS address.
1.3.6.1.4.1.2011.6.145.1.1.1.17.1.12ColumnhwXponOntIpConfigPppoeAccountModeread-writecurrentThe input method of pppoe user account. Options: 1. oltcfg(1) - Indicates the user account is input on the ont 2. ontcfg(2) - Indicates the user account is inp…
1.3.6.1.4.1.2011.6.145.1.1.1.17.1.13ColumnhwXponOntIpConfigPppoeUserNameread-writecurrentThe username of the pppoe allocation mode.
1.3.6.1.4.1.2011.6.145.1.1.1.17.1.14ColumnhwXponOntIpConfigPppoePasswordread-writecurrentThe password of the pppoe allocation mode.
1.3.6.1.4.1.2011.6.145.1.1.1.17.1.15ColumnhwXponOntIpconfigDhcpResetread-writecurrentThis object is used for resetting the ip host in the DHCP mode. Options: 1. reset(1) - DHCP reset in the DHCP mode 2. invalid(-1) - invalid
1.3.6.1.4.1.2011.6.145.1.1.1.17.1.16ColumnhwXponOntIpconfigRowStatusread-createcurrentThe hwXponOntIpconfigRowStatus is used to create a new row or to modify or delete an existing row in this table. Options: 1. createAndGo(4) -create a new insta…
1.3.6.1.4.1.2011.6.145.1.1.1.17.1.17ColumnhwXponOntIpconfigVlanModeread-writecurrentThis object indicates the vlan mode. Options: 1. transparent(1) - Indicates that the VLAN mode is transparent 2. single(2) - Indicates that the VLAN mode is si…
1.3.6.1.4.1.2011.6.145.1.1.1.17.1.18ColumnhwXponOntIpConfigPppoeAuthenticationread-writecurrentThis object indicates the pppoe authentication mode. Options: 1. auto(1) - Indicates that the pppoe authentication mode is auto 2. pap(2) - Indicates that the …
1.3.6.1.4.1.2011.6.145.1.1.1.17.1.19ColumnhwXponOntIpConfigUsedWanProfNameread-writecurrentThis object indicates the name of wan profile that is bound to the ONT
1.3.6.1.4.1.2011.6.145.1.1.1.18TablehwXponOntCapabilityInfoTablenot-accessiblecurrentThe ont info table. This table is used to query capability of the ont. The indexes of this table are ifIndex and hwXponOntIndex.
1.3.6.1.4.1.2011.6.145.1.1.1.18.1RowhwXponOntCapabilityInfoEntrynot-accessiblecurrentThe ont info table. This table is used to query capability of the ont. The indexes of this entry are ifIndex and hwXponOntIndex.
1.3.6.1.4.1.2011.6.145.1.1.1.18.1.1ColumnhwXponOntSupportVoipCfgMethodread-onlycurrentThis parameter indicates the voip configuration mode that the ONT supports. This BITS structure can report the following status: 1. omcioam(0) - This bit posit…
1.3.6.1.4.1.2011.6.145.1.1.1.18.1.2ColumnhwXponOntSupportVoipSignalProtocolread-onlycurrentThis parameter indicates the voip signal protocol that the ONT supports. This BITS structure can report the following status: 1. sip(0) - This bit position pos…
1.3.6.1.4.1.2011.6.145.1.1.1.19TablehwXponOntPowerSheddingStatusQueryTablenot-accessiblecurrentThe hwXponOntPowerSheddingStatusQueryTable is used to query the power shedding status of the ONT. The indexes of this table are ifIndex and hwXponOntIndex.
1.3.6.1.4.1.2011.6.145.1.1.1.19.1RowhwXponOntPowerSheddingStatusQueryEntrynot-accessiblecurrentThe hwXponOntPowerSheddingStatusQueryTable is used to query the power shedding status of the ONT. The indexes of this entry are ifIndex and hwXponOntIndex.
1.3.6.1.4.1.2011.6.145.1.1.1.19.1.1ColumnhwXponDeviceOntPowerSheddingStatusread-onlycurrentBinary indication of power shedding status for each shedding class. The ONU sets each bit to 1 when power shedding is active, and clears it to 0 when the servi…
1.3.6.1.4.1.2011.6.145.1.1.1.20TablehwGponDeviceOntCapabilityInfoTablenot-accessiblecurrentThe ont capability table. This table is used to query capability of the gpon ont. The indexes of this table are ifIndex and hwGponDeviceOntObjIndex.
1.3.6.1.4.1.2011.6.145.1.1.1.20.1RowhwGponDeviceOntCapabilityInfoEntrynot-accessiblecurrentThe ont capability table. This table is used to query capability of the gpon ont. The indexes of this entry are ifIndex and hwGponDeviceOntObjIndex.
1.3.6.1.4.1.2011.6.145.1.1.1.20.1.1ColumnhwGponDeviceOntCapInfoEquipmentIDread-onlycurrentThe ONT equipment ID.
1.3.6.1.4.1.2011.6.145.1.1.1.20.1.2ColumnhwGponDeviceOntCapInfoUplinkPonPortNumread-onlycurrentThis object indicates the number of uplink PON ports. -1 indicates the invalid value.
1.3.6.1.4.1.2011.6.145.1.1.1.20.1.3ColumnhwGponDeviceOntCapInfoPotsPortNumread-onlycurrentThis object indicates the number of POTS ports. -1 indicates the invalid value.
1.3.6.1.4.1.2011.6.145.1.1.1.20.1.4ColumnhwGponDeviceOntCapInfoEthPortNumread-onlycurrentThis object indicates the number of ETH ports. -1 indicates the invalid value.
1.3.6.1.4.1.2011.6.145.1.1.1.20.1.5ColumnhwGponDeviceOntCapInfoTdmPortNumread-onlycurrentThis object indicates the number of TDM ports. -1 indicates the invalid value.
1.3.6.1.4.1.2011.6.145.1.1.1.20.1.6ColumnhwGponDeviceOntCapInfoMocaPortNumread-onlycurrentThis object indicates the number of MOCA ports. -1 indicates the invalid value.
1.3.6.1.4.1.2011.6.145.1.1.1.20.1.7ColumnhwGponDeviceOntCapInfoCatvAniPortNumread-onlycurrentThis object indicates the number of CATV ANI ports. -1 indicates the invalid value.
1.3.6.1.4.1.2011.6.145.1.1.1.20.1.8ColumnhwGponDeviceOntCapInfoCatvUniPortNumread-onlycurrentThis object indicates the number of CATV UNI ports. -1 indicates the invalid value.
1.3.6.1.4.1.2011.6.145.1.1.1.20.1.9ColumnhwGponDeviceOntCapInfoGemPortNumread-onlycurrentThis object indicates the number of GEM ports. -1 indicates the invalid value.
1.3.6.1.4.1.2011.6.145.1.1.1.20.1.10ColumnhwGponDeviceOntCapInfoIpConfigurationModeread-onlycurrentThe mode of IP configuration. Options: 1. notsupport(1) - Not support 2. support(2) - Support 3. dhcp(3) - DHCP mode 4. static(4) - Static mode 5. invalid(-1) …
1.3.6.1.4.1.2011.6.145.1.1.1.20.1.11ColumnhwGponDeviceOntCapInfoTrafficSchedulerNumread-onlycurrentThis object indicates the number of the traffic scheduler.
1.3.6.1.4.1.2011.6.145.1.1.1.20.1.12ColumnhwGponDeviceOntCapInfoTcontNumread-onlycurrentThis object indicates the number of T-CONTs. -1 indicates the invalid value.
1.3.6.1.4.1.2011.6.145.1.1.1.20.1.13ColumnhwGponDeviceOntCapInfoTypeOfFlowControlread-onlycurrentThe type of the ONT flow control. Options: 1. pq(1) - PQ 2. gemportcar(2) - GEMPORT CAR 3. flowcar(3) - FLOW CAR 4. gemportcarandpq(4) - GEMPORT CAR and PQ 5. …
1.3.6.1.4.1.2011.6.145.1.1.1.20.1.14ColumnhwGponDeviceOntCapInfoDeviceTyperead-onlycurrentThis object indicates the ONT type. Options: 1. sfu(1) - The ONT type is SFU 2. hgu(2) - The ONT type is HGU 3. sbu(3) - The ONT type is SBU 4. cbu(4) - The ON…
1.3.6.1.4.1.2011.6.145.1.1.1.20.1.15ColumnhwGponDeviceOntCapInfoPowerSupplyControlread-onlycurrentThis object indicates if the ONT supports the power control. Options: 1. notsupport(1) - The ONT doesn't support the power control 2. support(2) - The ONT supp…
1.3.6.1.4.1.2011.6.145.1.1.1.20.1.16ColumnhwGponDeviceOntCapInfoExtOmciMsgFormatread-onlycurrentThis object indicates if the ONT supports Extended OMCI message format. Options: 1. notsupport(1) - The ONT doesn't support the Extended OMCI message format 2.…
1.3.6.1.4.1.2011.6.145.1.1.1.20.1.17ColumnhwGponDeviceOntCapInfoNumberOfPqInTcontread-onlycurrentThis object indicates the number of PQs in T-CONT.
1.3.6.1.4.1.2011.6.145.1.1.1.20.1.19ColumnhwGponDeviceOntCapInfoEthOamSupportread-onlycurrentThis object indicates if the ONT supports the type of ETHOAM by each bit. The ONT sets each bit to 1 when the ONT supports the type of ETHOAM. bit0: Y.1731 bit…
1.3.6.1.4.1.2011.6.145.1.1.1.20.1.20ColumnhwGponDeviceOntCapInfoVdslPortNumread-onlycurrentThis object indicates the number of VDSL ports. -1 indicates the invalid value.
1.3.6.1.4.1.2011.6.145.1.1.1.20.1.21ColumnhwGponOntSupportMulticastEncryptread-onlycurrentThis parameter indicates the capability of multicast encrypt that the ONT supports. Options: 1. notsupport(1) - Indicates that the ONT doesn't support the mult…
1.3.6.1.4.1.2011.6.145.1.1.1.20.1.22ColumnhwGponDeviceOntCapInfoWifiPortNumread-onlycurrentThis object indicates the number of WiFi ports. -1 indicates the invalid value.
1.3.6.1.4.1.2011.6.145.1.1.1.21TablehwXponDeviceOtdrTestTablenot-accessiblecurrentThis table is used for the OTDR testing. The index of this table is ifIndex.
1.3.6.1.4.1.2011.6.145.1.1.1.21.1RowhwXponDeviceOtdrTestEntrynot-accessiblecurrentThis table is used for the OTDR testing. The index of this entry is ifIndex.
1.3.6.1.4.1.2011.6.145.1.1.1.21.1.1ColumnhwXponDeviceOtdrTestOperread-writecurrentOTDR test operation of a port. Options: 1. start(1) - Indicates that the OTDR test is started on the port. 2. stop(2) - Indicates that the OTDR test is stopped…
1.3.6.1.4.1.2011.6.145.1.1.1.21.1.2ColumnhwXponDeviceOtdrTestStatusread-onlycurrentThe state of OTDR test. Options: 1. untested (1) - Indicates that the OTDR test is not performed for the port. 2. testing (2) - Indicates that the OTDR test is…
1.3.6.1.4.1.2011.6.145.1.1.1.21.1.3ColumnhwXponDeviceOtdrTestResultread-onlycurrentThis object indicates the result of OTDR test. Options: 1. Success(1) - Indicates that the OTDR test successfully. 2. FtpFail(2) - Indicates that the result fi…
1.3.6.1.4.1.2011.6.145.1.1.1.21.1.4ColumnhwXponDeviceOtdrTestWaveread-writecurrentTest wave for the OTDR test. Options: 1.upWave(1) - Indicates that the upstream wavelength is selected for the OTDR test. 2.downWave(2) - Indicates that the do…
1.3.6.1.4.1.2011.6.145.1.1.1.21.1.5ColumnhwXponDeviceOtdrTestPulseWidthread-writecurrentPulse width of test signals. Unit: 0.01ns The value of this node can be -1 indicates that query fails or no information is detected. Default:2500.
1.3.6.1.4.1.2011.6.145.1.1.1.21.1.6ColumnhwXponDeviceOtdrClockRateread-onlycurrentClock rate of the OTDR test. Options: 1.fortyMHz(1) - Indicates that the clock rate of the OTDR test is 40 MHz, at which, the system works in the low power con…
1.3.6.1.4.1.2011.6.145.1.1.1.21.1.7ColumnhwXponDeviceOtdrTestSignalTyperead-writecurrentType of sent OTDR test signals. Options: 1.singlePulse(1) - Indicates single pulse 2.singlePnSequence(2) - Indicates single PN sequence. 3.singleGrayCodeSequen…
1.3.6.1.4.1.2011.6.145.1.1.1.21.1.8ColumnhwXponDeviceOtdrTestFreqread-writecurrentSampling frequency of the OTDR test; Fclk indicates the clock frequency. Options: 1.doubleFclk(1) - Indicates that the sampling frequency of OTDR test is 2 x F…
1.3.6.1.4.1.2011.6.145.1.1.1.21.1.9ColumnhwXponDeviceOtdrTestFilterSwitchread-writecurrentEnable status of the OTDR FIR filter. Options: 1.enable(1) - Indicates that the OTDR FIR filter is enabled. 2.disable(2) - Indicates that the OTDR FIR filter i…
1.3.6.1.4.1.2011.6.145.1.1.1.21.1.10ColumnhwXponDeviceOtdrTestFilterModeread-writecurrentParameter configuration principle of the FIR filter. Options: 1.systemDefault(1) - Indicates that the system default parameters are used for the FIR filter. 2.…
1.3.6.1.4.1.2011.6.145.1.1.1.21.1.11ColumnhwXponDeviceOtdrTestFilterPararead-writecurrentParameters of the FIR filter. If the parameter of hwXponDeviceOtdrTestFilterMode is set to the issued parameter, this parameter is forwarded to the OTDR chip. …
1.3.6.1.4.1.2011.6.145.1.1.1.21.1.12ColumnhwXponDeviceOtdrTestAverageTimeread-writecurrentAverage sampling times for OTDR test. Options: 1.thirtySeconds(1) - Indicates that the OTDR test is executed every 30 seconds. 2.oneMinute(2) - Indicates that …
1.3.6.1.4.1.2011.6.145.1.1.1.21.1.13ColumnhwXponDeviceOtdrTestOpticalFibreLengthread-writecurrentLength of the optical fiber to be tested. Options: 1.(1) - Indicates that the length of the optical fiber to be tested is 5 km. 2.(2) - Indicates that the leng…
1.3.6.1.4.1.2011.6.145.1.1.1.21.1.14ColumnhwXponDeviceOtdrTestDownPowerUsageread-writecurrentModulation depth of downstream test signals Currently, this value can be set to 10, 20, 30, 40, 50 and 100. which indicates that the modulation depth is 10%, 2…
1.3.6.1.4.1.2011.6.145.1.1.1.21.1.15ColumnhwXponDeviceOtdrUpTestModeread-writecurrentUpstream test mode. Options: 1.onlineTest(1) - Indicates that the upstream test mode is online test. 2.quickTest(2) - Indicates that the upstream test mode is …
1.3.6.1.4.1.2011.6.145.1.1.1.21.1.16ColumnhwXponDeviceOtdrServerIpAddressread-writecurrentThe destination IP address of the OTDR. The vlaue of this node can be FFFFFFFF indicates that query fails or no information is detected.
1.3.6.1.4.1.2011.6.145.1.1.1.21.1.17ColumnhwXponDeviceOtdrProtocolread-writecurrentTransfer protocol of test result. Options: 1.ftp(1) - Indicates that the test result file transfer mode is ftp. 2.tftp(2) - Indicates that the test result file…
1.3.6.1.4.1.2011.6.145.1.1.1.21.1.18ColumnhwXponDeviceOtdrUserNameread-writecurrentThe user name of OTDR test.
1.3.6.1.4.1.2011.6.145.1.1.1.21.1.19ColumnhwXponDeviceOtdrPasswordread-writecurrentThe password of OTDR test.
1.3.6.1.4.1.2011.6.145.1.1.1.21.1.20ColumnhwXponDeviceOtdrFilePathread-writecurrentThe file path of OTDR test.
1.3.6.1.4.1.2011.6.145.1.1.1.21.1.21ColumnhwXponDeviceOtdrTestFilterOrderread-writecurrentValue of the FIR filter order. Options: 1.fifteenOrder(1) - Indicates that the FIR filter order is fifteen. 2.sixteenOrder(2) - Indicates that the FIR filter o…
1.3.6.1.4.1.2011.6.145.1.1.1.22TablehwXponOpticsDdmInfoExTablenot-accessiblecurrentThis table supports the query of the information about the optical transceiver. The index of this table is ifIndex.
1.3.6.1.4.1.2011.6.145.1.1.1.22.1RowhwXponOpticsDdmInfoExEntrynot-accessiblecurrentThis table supports the query of the information about the optical transceiver. The index of this entry is ifIndex.
1.3.6.1.4.1.2011.6.145.1.1.1.22.1.1ColumnhwXponOpticsDdmInfoExTemperatureHighAlarmThresholdread-onlycurrentUpper alarm threshold of the temperature. Unit: 0.000001 C(centigrade) Options: 1. invalid(0x7FFFFFFF) - Indicates that the query fails or no information is de…
1.3.6.1.4.1.2011.6.145.1.1.1.22.1.2ColumnhwXponOpticsDdmInfoExTemperatureLowAlarmThresholdread-onlycurrentLower alarm threshold of the temperature. Unit: 0.000001 C(centigrade) Options: 1. invalid(0x7FFFFFFF) - Indicates that the query fails or no information is de…
1.3.6.1.4.1.2011.6.145.1.1.1.22.1.3ColumnhwXponOpticsDdmInfoExTemperatureHighWarningThresholdread-onlycurrentUpper warning threshold of the temperature. Unit: 0.000001 C(centigrade) Options: 1. invalid(0x7FFFFFFF) - Indicates that the query fails or no information is …
1.3.6.1.4.1.2011.6.145.1.1.1.22.1.4ColumnhwXponOpticsDdmInfoExTemperatureLowWarningThresholdread-onlycurrentLower warning threshold of the temperature. Unit: 0.000001 C(centigrade) Options: 1. invalid(0x7FFFFFFF) - Indicates that the query fails or no information is …
1.3.6.1.4.1.2011.6.145.1.1.1.22.1.5ColumnhwXponOpticsDdmInfoExSupplyVoltageHighAlarmThresholdread-onlycurrentUpper alarm threshold of the voltage. Unit: 0.000001V Options: 1. invalid(0x7FFFFFFF) - Indicates that the query fails or no information is detected
1.3.6.1.4.1.2011.6.145.1.1.1.22.1.6ColumnhwXponOpticsDdmInfoExSupplyVoltageLowAlarmThresholdread-onlycurrentLower alarm threshold of the voltage. Unit: 0.000001V Options: 1. invalid(0x7FFFFFFF) - Indicates that the query fails or no information is detected
1.3.6.1.4.1.2011.6.145.1.1.1.22.1.7ColumnhwXponOpticsDdmInfoExSupplyVoltageHighWarningThresholdread-onlycurrentUpper warning threshold of the voltage. Unit: 0.000001V Options: 1. invalid(0x7FFFFFFF) - Indicates that the query fails or no information is detected
1.3.6.1.4.1.2011.6.145.1.1.1.22.1.8ColumnhwXponOpticsDdmInfoExSupplyVoltageLowWarningThresholdread-onlycurrentLower warning threshold of the voltage. Unit: 0.000001V Options: 1. invalid(0x7FFFFFFF) - Indicates that the query fails or no information is detected
1.3.6.1.4.1.2011.6.145.1.1.1.22.1.9ColumnhwXponOpticsDdmInfoExTxBiasCurrentHighAlarmThresholdread-onlycurrentUpper alarm threshold of the bias current. Unit: 0.000001A Options: 1. invalid(-1) - Indicates that the query fails or no information is detected
1.3.6.1.4.1.2011.6.145.1.1.1.22.1.10ColumnhwXponOpticsDdmInfoExTxBiasCurrentLowAlarmThresholdread-onlycurrentLower alarm threshold of the bias current. Unit: 0.000001A Options: 1. invalid(-1) - Indicates that the query fails or no information is detected
1.3.6.1.4.1.2011.6.145.1.1.1.22.1.11ColumnhwXponOpticsDdmInfoExTxBiasCurrentHighWarningThresholdread-onlycurrentUpper warning threshold of the bias current. Unit: 0.000001A Options: 1. invalid(-1) - Indicates that the query fails or no information is detected
1.3.6.1.4.1.2011.6.145.1.1.1.22.1.12ColumnhwXponOpticsDdmInfoExTxBiasCurrentLowWarningThresholdread-onlycurrentLower warning threshold of the bias current. Unit: 0.000001A Options: 1. invalid(-1) - Indicates that the query fails or no information is detected
1.3.6.1.4.1.2011.6.145.1.1.1.22.1.13ColumnhwXponOpticsDdmInfoExTxPowerHighAlarmThresholdread-onlycurrentUpper alarm threshold of the Tx power. Unit: 0.000001dBm Options: 1. invalid(0x7FFFFFFF) - Indicates that the query fails or no information is detected
1.3.6.1.4.1.2011.6.145.1.1.1.22.1.14ColumnhwXponOpticsDdmInfoExTxPowerLowAlarmThresholdread-onlycurrentLower alarm threshold of the Tx power. Unit: 0.000001dBm Options: 1. invalid(0x7FFFFFFF) - Indicates that the query fails or no information is detected
1.3.6.1.4.1.2011.6.145.1.1.1.22.1.15ColumnhwXponOpticsDdmInfoExTxPowerHighWarningThresholdread-onlycurrentUpper warning threshold of the Tx power. Unit: 0.000001dBm Options: 1. invalid(0x7FFFFFFF) - Indicates that the query fails or no information is detected
1.3.6.1.4.1.2011.6.145.1.1.1.22.1.16ColumnhwXponOpticsDdmInfoExTxPowerLowWarningThresholdread-onlycurrentLower warning threshold of the Tx power. Unit: 0.000001dBm Options: 1. invalid(0x7FFFFFFF) - Indicates that the query fails or no information is detected
1.3.6.1.4.1.2011.6.145.1.1.1.22.1.17ColumnhwXponOpticsDdmInfoExRxPowerHighAlarmThresholdread-onlycurrentUpper alarm threshold of the Rx power. Unit: 0.000001dBm Options: 1. invalid(0x7FFFFFFF) - Indicates that the query fails or no information is detected
1.3.6.1.4.1.2011.6.145.1.1.1.22.1.18ColumnhwXponOpticsDdmInfoExRxPowerLowAlarmThresholdread-onlycurrentLower alarm threshold of the Rx power. Unit: 0.000001dBm Options: 1. invalid(0x7FFFFFFF) - Indicates that the query fails or no information is detected
1.3.6.1.4.1.2011.6.145.1.1.1.22.1.19ColumnhwXponOpticsDdmInfoExRxPowerHighWarningThresholdread-onlycurrentUpper warning threshold of the Rx power. Unit: 0.000001dBm Options: 1. invalid(0x7FFFFFFF) - Indicates that the query fails or no information is detected
1.3.6.1.4.1.2011.6.145.1.1.1.22.1.20ColumnhwXponOpticsDdmInfoExRxPowerLowWarningThresholdread-onlycurrentLower warning threshold of the Rx power. Unit: 0.000001dBm Options: 1. invalid(0x7FFFFFFF) - Indicates that the query fails or no information is detected
1.3.6.1.4.1.2011.6.145.1.1.1.22.1.21ColumnhwXponOpticsDdmInfoEx10GTxBiasCurrentread-onlycurrentCurrent of the 10G EPON optical transceiver. Unit: 0.000001A Options: 1. invalid(-1) - Indicates that the query fails or no information is detected
1.3.6.1.4.1.2011.6.145.1.1.1.22.1.22ColumnhwXponOpticsDdmInfoEx10GTxBiasCurrentHighAlarmThresholdread-onlycurrentUpper alarm threshold of the 10G EPON optical transceiver bias current. Unit: 0.000001A Options: 1. invalid(-1) - Indicates that the query fails or no informat…
1.3.6.1.4.1.2011.6.145.1.1.1.22.1.23ColumnhwXponOpticsDdmInfoEx10GTxBiasCurrentLowAlarmThresholdread-onlycurrentLower alarm threshold of the 10G EPON optical transceiver bias current. Unit: 0.000001A Options: 1. invalid(-1) - Indicates that the query fails or no informat…
1.3.6.1.4.1.2011.6.145.1.1.1.22.1.24ColumnhwXponOpticsDdmInfoEx10GTxBiasCurrentHighWarningThresholdread-onlycurrentUpper warning threshold of the 10G EPON optical transceiver bias current. Unit: 0.000001A Options: 1. invalid(-1) - Indicates that the query fails or no inform…
1.3.6.1.4.1.2011.6.145.1.1.1.22.1.25ColumnhwXponOpticsDdmInfoEx10GTxBiasCurrentLowWarningThresholdread-onlycurrentLower warning threshold of the 10G EPON optical transceiver bias current. Unit: 0.000001A Options: 1. invalid(-1) - Indicates that the query fails or no inform…
1.3.6.1.4.1.2011.6.145.1.1.1.22.1.26ColumnhwXponOpticsDdmInfoEx10GTxPowerread-onlycurrentTx optical power of the 10G EPON optical transceiver. Unit: 0.01dBm Options: 1. invalid(0x7FFFFFFF) - Indicates that the query fails or no information is detec…
1.3.6.1.4.1.2011.6.145.1.1.1.22.1.27ColumnhwXponOpticsDdmInfoEx10GTxPowerHighAlarmThresholdread-onlycurrentUpper alarm threshold of the 10G EPON optical transceiver Tx power. Unit: 0.000001dBm Options: 1. invalid(0x7FFFFFFF) - Indicates that the query fails or no in…
1.3.6.1.4.1.2011.6.145.1.1.1.22.1.28ColumnhwXponOpticsDdmInfoEx10GTxPowerLowAlarmThresholdread-onlycurrentLower alarm threshold of the 10G EPON optical transceiver Tx power. Unit: 0.000001dBm Options: 1. invalid(0x7FFFFFFF) - Indicates that the query fails or no in…
1.3.6.1.4.1.2011.6.145.1.1.1.22.1.29ColumnhwXponOpticsDdmInfoEx10GTxPowerHighWarningThresholdread-onlycurrentUpper warning threshold of the 10G EPON optical transceiver Tx power. Unit: 0.000001dBm Options: 1. invalid(0x7FFFFFFF) - Indicates that the query fails or no …
1.3.6.1.4.1.2011.6.145.1.1.1.22.1.30ColumnhwXponOpticsDdmInfoEx10GTxPowerLowWarningThresholdread-onlycurrentLower warning threshold of the 10G EPON optical transceiver Tx power. Unit: 0.000001dBm Options: 1. invalid(0x7FFFFFFF) - Indicates that the query fails or no …
1.3.6.1.4.1.2011.6.145.1.1.1.22.1.31ColumnhwXponOpticsDdmInfoExCatvRxPowerHighAlarmThresholdread-onlycurrentUpper AlarmThreshold threshold of the CATV Rx power. Unit: 0.000001dBm Options: 1. invalid(0x7FFFFFFF) - Indicates that the query fails or no information is de…
1.3.6.1.4.1.2011.6.145.1.1.1.22.1.32ColumnhwXponOpticsDdmInfoExCatvRxPowerLowAlarmThresholdread-onlycurrentLower AlarmThreshold threshold of the CATV Rx power. Unit: 0.000001dBm Options: 1. invalid(0x7FFFFFFF) - Indicates that the query fails or no information is de…
1.3.6.1.4.1.2011.6.145.1.1.1.22.1.33ColumnhwXponOpticsDdmInfoExModuleTyperead-onlycurrentOptions: 1. gpon(1) - GPON 2. epon(2) - EPON 3. epon10g(3) - 10G EPON 4. gpon10g(4) - 10G GPON 5. wdmpon(5) - WDM PON 6. hybridpon(6) - hybrid PON 7. gponepon(…
1.3.6.1.4.1.2011.6.145.1.1.1.22.1.34ColumnhwXponOpticsDdmInfoExSubTyperead-onlycurrentOptions: 1. classbplus(1) - CLASS B+ 2. classcplus(2) - CLASS C+ 3. classb(3) - CLASS B 4. classcplusplus(4) - CLASS C++ 5. n2a(33) - N2a 6. n2b(34) - N2b 7. n…
1.3.6.1.4.1.2011.6.145.1.1.1.22.1.35ColumnhwXponOpticsDdmInfoExPrecisionread-onlycurrentThis object indicates the precision of optical power. Unit: 0.1dBm Options: 1. invalid(-1) - Indicates that the query fails or no information is detected
1.3.6.1.4.1.2011.6.145.1.1.1.22.1.36ColumnhwXponOpticsDdmInfoExEncapsulationTyperead-onlycurrentOptions: 1. sff2x5(1) - SFF 2x5 2. sff2x10(2) - SFF 2x10 3. sfp(3) - SFP 4. xfp(4) - XFP 5. lxfp(5) - LXFP 6. bosaonboard(6) - BOSA ON BOARD 7. unknown(7) - Un…
1.3.6.1.4.1.2011.6.145.1.1.1.22.1.37ColumnhwXponOpticsDdmInfoExVendorPNread-onlycurrentThis object indicates the part number.
1.3.6.1.4.1.2011.6.145.1.1.1.22.1.38ColumnhwXponOpticsDdmInfoExUsedTyperead-onlycurrentThis object indicates the application scenario of the optical transceiver. Options: 1. olt(1) - OLT 2. onu(3) - ONU 3. catvtriplex(4) - CATV TriPlex 4. unknown…
1.3.6.1.4.1.2011.6.145.1.1.1.23TablehwXponOpticsParameterRangeTablenot-accessiblecurrentThe xpon optics parameter range table. This table is used to query range of the optics parameter. The indexes of this table are hwXponOpticalModuleType, hwXpon…
1.3.6.1.4.1.2011.6.145.1.1.1.23.1RowhwXponOpticsParameterRangeEntrynot-accessiblecurrentThe xpon optics parameter range table. This table is used to query range of the optics parameter. The indexes of this entry are hwXponOpticalModuleType, hwXpon…
1.3.6.1.4.1.2011.6.145.1.1.1.23.1.1ColumnhwXponOpticalModuleTypenot-accessiblecurrentThis object indicates the xpon optical module type. Options: 1. gpon(2) - gpon type. 2. epon(3) - epon type. 3. tengepon(4) - 10gepon type. 4. xgpon(5) - xgpon…
1.3.6.1.4.1.2011.6.145.1.1.1.23.1.2ColumnhwXponOpticalModuleSubTypenot-accessiblecurrentThe xpon optical module sub type. GPON:0x2 - CLASS B+, 0x3 - CLASS C+, 0x4 - CLASS B, 0x5 - CLASS C++, EPON:0x2 - PX20, 0x3 - PX20+, 0x4 - PX20++, 10GEPON:0x2 …
1.3.6.1.4.1.2011.6.145.1.1.1.23.1.3ColumnhwXponOpticalModuleOltOntTypenot-accessiblecurrentThis object indicates the xpon optical module olt ont type. Options: 1. olt(2) - olt type. 2. onu(4) - onu type.
1.3.6.1.4.1.2011.6.145.1.1.1.23.1.4ColumnhwXponOpticalModuleBandwidthTypenot-accessiblecurrentThis object indicates the xpon optical module bandwidth type. Options: 1. bw1g(1) - bw1g type. 2. bw10g(2) - bw10g type.
1.3.6.1.4.1.2011.6.145.1.1.1.23.1.5ColumnhwXponOpticalModuleRxPowerValidValueMaxread-onlycurrentThe xpon optical module Rx power maximum valid value, units of 0.01 dBm.
1.3.6.1.4.1.2011.6.145.1.1.1.23.1.6ColumnhwXponOpticalModuleRxPowerValidValueMinread-onlycurrentThe xpon optical module Rx power minimum valid value, units of 0.01 dBm.
1.3.6.1.4.1.2011.6.145.1.1.1.24TablehwGponInteroperModeConfigTablenot-accessiblecurrentThis table is used to configure the interoperability mode of the ONT. The indexes of this table are hwGponInteroperModeOntVenderIDInfoIndex, hwGponInteroperMod…
1.3.6.1.4.1.2011.6.145.1.1.1.24.1RowhwGponInteroperModeConfigEntrynot-accessiblecurrentThis table is used to configure the interoperability mode of the ONT. The indexes of this entry are hwGponInteroperModeOntVenderIDInfoIndex, hwGponInteroperMod…
1.3.6.1.4.1.2011.6.145.1.1.1.24.1.1ColumnhwGponInteroperModeOntVenderIDInfoIndexnot-accessiblecurrentThis object indicates the vender ID of the ONT.
1.3.6.1.4.1.2011.6.145.1.1.1.24.1.2ColumnhwGponInteroperModeOntEquipmentIDInfoIndexnot-accessiblecurrentThis object indicates the equipment ID of the ONT. 0 indicates that the equipment ID of the ONT is not specified.
1.3.6.1.4.1.2011.6.145.1.1.1.24.1.3ColumnhwGponInteroperModeOntSoftwareVersionInfoIndexnot-accessiblecurrentThis object indicates the software version of the ONT. 0 indicates that the software version of the ONT is not specified.
1.3.6.1.4.1.2011.6.145.1.1.1.24.1.4ColumnhwGponInteroperModeSwitchread-writecurrentThe switch mode of ONT interoperability. Options: 1. ituT(1) - The switch mode of gpon ONT interoperability is ituT 2. ctc(2) - The switch mode of gpon ONT int…
1.3.6.1.4.1.2011.6.145.1.1.1.24.1.5ColumnhwGponInteroperModeOntMutlicastAuthModeSwitchread-writecurrentThe switch mode of gpon ONT multicast authentication. Options: 1. ontControl(1) - The switch mode of gpon ONT multicast authentication is ont-control 2. oltCon…
1.3.6.1.4.1.2011.6.145.1.1.1.24.1.6ColumnhwGponInteroperModeActiveModeread-writecurrentThe active mode of gpon ONT interoperability mode. Options: 1. immediate(1) - Indicates that the ONT takes effect immediately 2. nextStartup(2) - Indicates tha…
1.3.6.1.4.1.2011.6.145.1.1.1.24.1.7ColumnhwGponInteroperModeConfigRowStatusread-createcurrentThe hwGponInteroperModeConfigRowStatus is used to create a new row or delete an existing row in this table. Options: 1. createAndGo(4) -create a new instance o…
1.3.6.1.4.1.2011.6.145.1.1.1.24.1.8ColumnhwGponInteroperModeOntWanConfigModeread-writecurrentThe mode of gpon ont wan config mode. Options: 1. setAfterCreate(1) - The mode of gpon wan config mode is set-after-create 2. setByCreate(2) - The mode of gpon…
1.3.6.1.4.1.2011.6.145.1.1.1.24.1.9ColumnhwGponInteroperModeOntVlanTagOperModeread-writecurrentThe mode of gpon ont vlan tag operation mode. Options: 1. modifyExternalTag(1) - The mode of gpon vlan tag operation mode is modify-external-tag 2. modifySingl…
1.3.6.1.4.1.2011.6.145.1.1.1.24.1.10ColumnhwGponInteroperModeAniMVlanFilterread-writecurrentIndicates the mode of multicast VLAN filtering on the GPON ONT ANI side. Options: 1. default(0) -Indicates the default system behavior. 2. enable(1) -Creates t…
1.3.6.1.4.1.2011.6.145.1.1.1.25TablehwXponOltOpticsModuleExtInfoTablenot-accessiblecurrentThis table is used to query the information about the optical transceiver. The index of this table is ifIndex.
1.3.6.1.4.1.2011.6.145.1.1.1.25.1RowhwXponOltOpticsModuleExtInfoEntrynot-accessiblecurrentThis table is used to query the information about the optical transceiver. The index of this entry is ifIndex.
1.3.6.1.4.1.2011.6.145.1.1.1.25.1.1ColumnhwXponOltOpticsModuleInfoRateIdentifierread-onlycurrentThis object indicates the type of rate select functionality. Options: 1. unspecified (1) - Unspecified 2. rateId4g2g1gRateSelectAs0As1(2) - 4/2/1G Rate_Select …
1.3.6.1.4.1.2011.6.145.1.1.1.25.1.2ColumnhwXponOltOpticsModuleInfoLength50MicronOM3read-onlycurrentThis object indicates the link length supported for 50 um OM3 fiber, units of 10 m.
1.3.6.1.4.1.2011.6.145.1.1.1.25.1.3ColumnhwXponOltOpticsModuleInfoCcBaseStateread-onlycurrentThis object indicates the CC_BASE match state. Options: 1. correct (1) - Correct 2. incorrect(2) - Incorrect 3. invalid (-1) - Indicates that the query fails o…
1.3.6.1.4.1.2011.6.145.1.1.1.25.1.4ColumnhwXponOltOpticsModuleInfoCcExtStateread-onlycurrentThis object indicates the CC_EXT match state. Options: 1. correct (1) - Correct 2. incorrect(2) - Incorrect 3. invalid (-1) - Indicates that the query fails or…
1.3.6.1.4.1.2011.6.145.1.1.1.26TablehwGponOntPortServiceCfgTablenot-accessiblecurrentThis table is used to configure the service parameter of the ONT port. The indexes of this table are ifIndex, hwXponOntIndex, hwGponOntifType and hwGponOntifPo…
1.3.6.1.4.1.2011.6.145.1.1.1.26.1RowhwGponOntPortServiceCfgEntrynot-accessiblecurrentThis table is used to configure the service parameter of the ONT port. The indexes of this entry are ifIndex, hwXponOntIndex, hwGponOntifType and hwGponOntifPo…
1.3.6.1.4.1.2011.6.145.1.1.1.26.1.1ColumnhwGponOntPortNativeVlanread-writecurrentThis object indicates the native VLAN of the port.
1.3.6.1.4.1.2011.6.145.1.1.1.26.1.2ColumnhwGponOntPortNativeVlanPriorityread-writecurrentThis object indicates the native VLAN priority of the port.
1.3.6.1.4.1.2011.6.145.1.1.1.26.1.3ColumnhwGponOntPortIgmpForwardModeread-writecurrentThe object is used to enable or disable the switch of ONT port IGMP forward mode. Options: 1. disable(1) - Disable the switch of ONT port IGMP forward mode 2. …
1.3.6.1.4.1.2011.6.145.1.1.1.26.1.4ColumnhwGponOntPortCfgQinqModeread-writecurrentThe object is used to enable or disable the switch of ONT port QinQ transparent transmission mode.. Options: 1. disable(1) - Disable the switch of ONT port Qin…
1.3.6.1.4.1.2011.6.145.1.1.1.27TablehwXponDeviceOntNoAuthConfigTablenot-accessiblecurrentThe hwXponDeviceOntNoAuthConfigTable is used to configure the type of ONT to be no authentication. The indexes of this table are hwXponDeviceOntAccessType and …
1.3.6.1.4.1.2011.6.145.1.1.1.27.1RowhwXponDeviceOntNoAuthConfigEntrynot-accessiblecurrentThe hwXponDeviceOntNoAuthConfigTable is used to configure the type of ONT to be no authentication. The indexes of this entry are hwXponDeviceOntAccessType and …
1.3.6.1.4.1.2011.6.145.1.1.1.27.1.1ColumnhwXponDeviceOntAccessTypenot-accessiblecurrentThis object indicates the ONT access type. Options: 1. gpon(1) - The ONT access type is GPON 2. epon(2) - The ONT access type is EPON
1.3.6.1.4.1.2011.6.145.1.1.1.27.1.2ColumnhwXponDeviceOntModelnot-accessiblecurrentThis object indicates the ONT model.
1.3.6.1.4.1.2011.6.145.1.1.1.27.1.3ColumnhwXponDeviceOntNoAuthRowStatusread-createcurrentThis object is used to create a new row or to modify or delete an existing row in this table. Options: 1. createAndGo(4) -create a new instance of a conceptual…
1.3.6.1.4.1.2011.6.145.1.1.1.28TablehwGponPortInfoTablenot-accessiblecurrentGPON port Info table. This table is used to query the GPON/XG-PON port information. The index of this table is ifIndex.
1.3.6.1.4.1.2011.6.145.1.1.1.28.1RowhwGponPortInfoEntrynot-accessiblecurrentGPON port Info table. This table is used to query the GPON/XG-PON port information. The index of this entry is ifIndex.
1.3.6.1.4.1.2011.6.145.1.1.1.28.1.1ColumnhwGponPortMulticastEncryptStateread-onlycurrentQuery the Multicast GEM Port encypt switch. Options: 1. off(1) - The Multicast GEM Port encypt switch is not encrypted 2. on(2) - The Multicast GEM Port encypt…
1.3.6.1.4.1.2011.6.145.1.1.1.29TablehwEponInteroperModeConfigTablenot-accessiblecurrentThis table is used to configure the interoperability mode of the EPON ONT. The indexes of this table are hwEponInteroperModeOntVendorIDInfoIndex, hwEponInterop…
1.3.6.1.4.1.2011.6.145.1.1.1.29.1RowhwEponInteroperModeConfigEntrynot-accessiblecurrentThis table is used to configure the interoperability mode of the EPON ONT. The indexes of this entry are hwEponInteroperModeOntVendorIDInfoIndex, hwEponInterop…
1.3.6.1.4.1.2011.6.145.1.1.1.29.1.1ColumnhwEponInteroperModeOntVendorIDInfoIndexnot-accessiblecurrentThis object indicates the vender ID of the ONT.
1.3.6.1.4.1.2011.6.145.1.1.1.29.1.2ColumnhwEponInteroperModeOntModelInfoIndexnot-accessiblecurrentThis object indicates the ont model of the ONT. indicates that the ont model of the ONT is not specified.
1.3.6.1.4.1.2011.6.145.1.1.1.29.1.3ColumnhwEponInteroperModeOntSoftwareVersionInfoIndexnot-accessiblecurrentThis object indicates the software version of the ONT. 0 indicates that the software version of the ONT is not specified.
1.3.6.1.4.1.2011.6.145.1.1.1.29.1.4ColumnhwEponInteroperModeStandardread-writecurrentThe mode standard of epon ONT interoperability. Options: 1. ctc(1) - The mode standard of epon ONT interoperability is ctc 2. cuc(2) - The mode standard of epo…
1.3.6.1.4.1.2011.6.145.1.1.1.29.1.5ColumnhwEponInteroperModeActiveModeread-writecurrentThe active mode of epon ONT interoperability mode. Options: 1. immediate(1) - Indicates that the ONT takes effect immediately 2. nextStartup(2) - Indicates tha…
1.3.6.1.4.1.2011.6.145.1.1.1.29.1.6ColumnhwEponInteroperModeConfigRowStatusread-createcurrentThe hwEponInteroperModeConfigRowStatus is used to create a new row or delete an existing row in this table. Options: 1. createAndGo(4) -create a new instance o…
1.3.6.1.4.1.2011.6.145.1.1.1.30TablehwXponUnconfiguredRogueOntTablenot-accessiblecurrentThis table is used to query the information about rogue ONTs that is not added. The index of this table is a combination of ifIndex and hwXponUnconfiguredRogue…
1.3.6.1.4.1.2011.6.145.1.1.1.30.1RowhwXponUnconfiguredRogueOntEntrynot-accessiblecurrentThis table is used to query the information about rogue ONTs that is not added. The index of this entry is a combination of ifIndex and hwXponUnconfiguredRogue…
1.3.6.1.4.1.2011.6.145.1.1.1.30.1.1ColumnhwXponUnconfiguredRogueOntIndexnot-accessiblecurrentThe index of the rogue ONTs which is not added.
1.3.6.1.4.1.2011.6.145.1.1.1.30.1.2ColumnhwXponUnconfiguredRogueOntIdentifierread-onlycurrentThis object indicates the identifier of rogue ONTs that is not added.
1.3.6.1.4.1.2011.6.145.1.1.1.31TablehwXponOntPortConfigTablenot-accessiblecurrentThis table is used to configure the mac learning switch of teh ont port. The indexes of this table are ifIndex, hwXponOntIndex, hwXponOntPhyType and hwXponOntP…
1.3.6.1.4.1.2011.6.145.1.1.1.31.1RowhwXponOntPortConfigEntrynot-accessiblecurrentThis table is used to configure the mac learning switch of teh ont port. The indexes of this entry are ifIndex, hwXponOntIndex, hwXponOntPhyType and hwXponOntP…
1.3.6.1.4.1.2011.6.145.1.1.1.31.1.1ColumnhwXponOntPhyTypenot-accessiblecurrentThe ONT port type. Options: 1. t1(13) - T1 2. e1(14) - E1 3. fe(24) - FE 4. ge(34) - GE 5. vdsl(37) - VDSL 6. moca(46) - MOCA 7. eth(47) - ETH 8. iphost(50) - …
1.3.6.1.4.1.2011.6.145.1.1.1.31.1.2ColumnhwXponOntPhyIndexnot-accessiblecurrentThe ONT port ID.
1.3.6.1.4.1.2011.6.145.1.1.1.31.1.3ColumnhwXponOntPortCfgMacLearningSwitchread-writecurrentThis object is used to configure the mac learning switch of teh ont port. Options: 1. enable(1) - Indicates that the switch is enabled 2. disable(2) - Indicate…
1.3.6.1.4.1.2011.6.145.1.1.1.31.1.4ColumnhwXponOntPortCfgRouteSwitchread-writecurrentThis object is used to configure the route switch of ont port. Options: 1. unconcern(0) - Indicates that the switch is unconcern 2. enable(1) - Indicates that …
1.3.6.1.4.1.2011.6.145.1.1.1.32TablehwXponOntPortStaticMacTablenot-accessiblecurrentThis table is used to configure the static mac address and vlan of the ONT port. The indexes of this table are ifIndex, hwXponOntIndex, hwXponOntPhyType, hwXpo…
1.3.6.1.4.1.2011.6.145.1.1.1.32.1RowhwXponOntPortStaticMacEntrynot-accessiblecurrentThis table is used to configure the static mac address and vlan of the ONT port. The indexes of this entry are ifIndex, hwXponOntIndex, hwXponOntPhyType, hwXpo…
1.3.6.1.4.1.2011.6.145.1.1.1.32.1.1ColumnhwXponStaticMacIndexnot-accessiblecurrentIndicates the index of a static MAC address. The index is used by the software for recording an entry.
1.3.6.1.4.1.2011.6.145.1.1.1.32.1.2ColumnhwXponStaticMacVlanIDread-writecurrentThe VLAN ID.
1.3.6.1.4.1.2011.6.145.1.1.1.32.1.3ColumnhwXponStaticMacMacAddrread-writecurrentStatic MAC address of the ONT port.
1.3.6.1.4.1.2011.6.145.1.1.1.32.1.4ColumnhwXponStaticMacRowStatusread-createcurrentThe hwStaticMacRowStatus is used to create a new row or delete an existing row in this table. Options: 1. createAndGo(4) -create a new instance of a conceptual…
1.3.6.1.4.1.2011.6.145.1.1.1.33TablehwXponOntLoadInfoTablenot-accessiblecurrentThis table is used to load the ONT file. The indexes of this table are ifIndex, hwXponOntNewIndex.
1.3.6.1.4.1.2011.6.145.1.1.1.33.1RowhwXponOntLoadInfoEntrynot-accessiblecurrentThis table is used to load the ONT file. The indexes of this entry are ifIndex, hwXponOntNewIndex.
1.3.6.1.4.1.2011.6.145.1.1.1.33.1.1ColumnhwXponOntNewIndexnot-accessiblecurrentONT ID, range: 0-254.
1.3.6.1.4.1.2011.6.145.1.1.1.33.1.2ColumnhwXponOntLoadInfoAppFragmentNumread-onlycurrentIndicates the fragment num of of the app load for ONT. The value (-1) indicates that the fragment num is the invalid value.
1.3.6.1.4.1.2011.6.145.1.1.1.33.1.3ColumnhwXponOntLoadInfoAppCurrFragmentread-onlycurrentIndicates the current fragment index of of the app load for ONT, range: 1~hwXponOntLoadInfoAppFragmentNum. The value (-1) indicates that the fragment index is …
1.3.6.1.4.1.2011.6.145.1.1.1.34TablehwXponOpticalDdmProfileReferenceTablenot-accessiblecurrentThis table supports the query of the reference thresholds about the optical transceiver. The indexes of this table are hwXponOpticalUseType, hwXponOpticalGrade…
1.3.6.1.4.1.2011.6.145.1.1.1.34.1RowhwXponOpticalDdmProfileReferenceEntrynot-accessiblecurrentThis table supports the query of the reference thresholds about the optical transceiver. The indexes of this entry are hwXponOpticalUseType, hwXponOpticalGrade…
1.3.6.1.4.1.2011.6.145.1.1.1.34.1.1ColumnhwXponOpticalUseTypenot-accessiblecurrentThis object indicates the application scenario of the optical transceiver. Options: 1. olt(1) - OLT 2. onu(3) - ONU 3. catvtriplex(4) - CATV TriPlex 4. unknown…
1.3.6.1.4.1.2011.6.145.1.1.1.34.1.2ColumnhwXponOpticalGradeTypenot-accessiblecurrentThis object indicates the grade of the optical transceiver. Options: 1. commercial(1) - Commercial grade 2. industrial(2) - Industrial grade
1.3.6.1.4.1.2011.6.145.1.1.1.34.1.3ColumnhwXponOpticalTypenot-accessiblecurrentOptions: 1. gpon(1) - GPON 2. epon(2) - EPON 3. epon10g(3) - 10G EPON 4. xgpon(4) - Asymmetric XG-PON 5. wdmpon(5) - WDM PON 6. hybridpon(6) - hybrid PON 7. gp…
1.3.6.1.4.1.2011.6.145.1.1.1.34.1.4ColumnhwXponOpticalSubTypenot-accessiblecurrentOptions: 1. classbplus(1) - CLASS B+ 2. classcplus(2) - CLASS C+ 3. classb(3) - CLASS B 4. classcplusplus(4) - CLASS C++ 5. n2a(33) - N2a 6. n2b(34) - N2b 7. n…
1.3.6.1.4.1.2011.6.145.1.1.1.34.1.5ColumnhwXponOpticalTxAlarmUpperread-onlycurrentUpper alarm threshold of the Tx power. Unit: 0.000001dBm Options: 1. invalid(0x7FFFFFFF) - Indicates that the query fails or no information is detected
1.3.6.1.4.1.2011.6.145.1.1.1.34.1.6ColumnhwXponOpticalTxAlarmLowerread-onlycurrentLower alarm threshold of the Tx power. Unit: 0.000001dBm Options: 1. invalid(0x7FFFFFFF) - Indicates that the query fails or no information is detected
1.3.6.1.4.1.2011.6.145.1.1.1.34.1.7ColumnhwXponOpticalTxWarnUpperread-onlycurrentUpper warning threshold of the Tx power. Unit: 0.000001dBm Options: 1. invalid(0x7FFFFFFF) - Indicates that the query fails or no information is detected
1.3.6.1.4.1.2011.6.145.1.1.1.34.1.8ColumnhwXponOpticalTxWarnLowerread-onlycurrentLower warning threshold of the Tx power. Unit: 0.000001dBm Options: 1. invalid(0x7FFFFFFF) - Indicates that the query fails or no information is detected
1.3.6.1.4.1.2011.6.145.1.1.1.34.1.9ColumnhwXponOpticalRxAlarmUpperread-onlycurrentUpper alarm threshold of the Rx power. Unit: 0.000001dBm Options: 1. invalid(0x7FFFFFFF) - Indicates that the query fails or no information is detected
1.3.6.1.4.1.2011.6.145.1.1.1.34.1.10ColumnhwXponOpticalRxAlarmLowerread-onlycurrentLower alarm threshold of the Rx power. Unit: 0.000001dBm Options: 1. invalid(0x7FFFFFFF) - Indicates that the query fails or no information is detected
1.3.6.1.4.1.2011.6.145.1.1.1.34.1.11ColumnhwXponOpticalRxWarnUpperread-onlycurrentUpper warning threshold of the Rx power. Unit: 0.000001dBm Options: 1. invalid(0x7FFFFFFF) - Indicates that the query fails or no information is detected
1.3.6.1.4.1.2011.6.145.1.1.1.34.1.12ColumnhwXponOpticalRxWarnLowerread-onlycurrentLower warning threshold of the Rx power. Unit: 0.000001dBm Options: 1. invalid(0x7FFFFFFF) - Indicates that the query fails or no information is detected
1.3.6.1.4.1.2011.6.145.1.1.1.34.1.13ColumnhwXponOpticalTxBiasCurrentAlarmUpperread-onlycurrentUpper alarm threshold of the bias current. Unit: 0.000001A Options: 1. invalid(-1) - Indicates that the query fails or no information is detected
1.3.6.1.4.1.2011.6.145.1.1.1.34.1.14ColumnhwXponOpticalTxBiasCurrentAlarmLowerread-onlycurrentLower alarm threshold of the bias current. Unit: 0.000001A Options: 1. invalid(-1) - Indicates that the query fails or no information is detected
1.3.6.1.4.1.2011.6.145.1.1.1.34.1.15ColumnhwXponOpticalTxBiasCurrentWarnUpperread-onlycurrentUpper warning threshold of the bias current. Unit: 0.000001A Options: 1. invalid(-1) - Indicates that the query fails or no information is detected
1.3.6.1.4.1.2011.6.145.1.1.1.34.1.16ColumnhwXponOpticalTxBiasCurrentWarnLowerread-onlycurrentLower warning threshold of the bias current. Unit: 0.000001A Options: 1. invalid(-1) - Indicates that the query fails or no information is detected
1.3.6.1.4.1.2011.6.145.1.1.1.34.1.17ColumnhwXponOpticalSupplyVoltageAlarmUpperread-onlycurrentUpper alarm threshold of the voltage. Unit: 0.000001V Options: 1. invalid(0x7FFFFFFF) - Indicates that the query fails or no information is detected
1.3.6.1.4.1.2011.6.145.1.1.1.34.1.18ColumnhwXponOpticalSupplyVoltageAlarmLowerread-onlycurrentLower alarm threshold of the voltage. Unit: 0.000001V Options: 1. invalid(0x7FFFFFFF) - Indicates that the query fails or no information is detected
1.3.6.1.4.1.2011.6.145.1.1.1.34.1.19ColumnhwXponOpticalSupplyVoltageWarnUpperread-onlycurrentUpper warning threshold of the voltage. Unit: 0.000001V Options: 1. invalid(0x7FFFFFFF) - Indicates that the query fails or no information is detected
1.3.6.1.4.1.2011.6.145.1.1.1.34.1.20ColumnhwXponOpticalSupplyVoltageWarnLowerread-onlycurrentLower warning threshold of the voltage. Unit: 0.000001V Options: 1. invalid(0x7FFFFFFF) - Indicates that the query fails or no information is detected
1.3.6.1.4.1.2011.6.145.1.1.1.34.1.21ColumnhwXponOpticalTemperatureAlarmUpperread-onlycurrentUpper alarm threshold of the temperature. Unit: 0.000001 C(centigrade) Options: 1. invalid(0x7FFFFFFF) - Indicates that the query fails or no information is de…
1.3.6.1.4.1.2011.6.145.1.1.1.34.1.22ColumnhwXponOpticalTemperatureAlarmLowerread-onlycurrentLower alarm threshold of the temperature. Unit: 0.000001 C(centigrade) Options: 1. invalid(0x7FFFFFFF) - Indicates that the query fails or no information is de…
1.3.6.1.4.1.2011.6.145.1.1.1.34.1.23ColumnhwXponOpticalTemperatureWarnUpperread-onlycurrentUpper warning threshold of the temperature. Unit: 0.000001 C(centigrade) Options: 1. invalid(0x7FFFFFFF) - Indicates that the query fails or no information is …
1.3.6.1.4.1.2011.6.145.1.1.1.34.1.24ColumnhwXponOpticalTemperatureWarnLowerread-onlycurrentLower warning threshold of the temperature. Unit: 0.000001 C(centigrade) Options: 1. invalid(0x7FFFFFFF) - Indicates that the query fails or no information is …
1.3.6.1.4.1.2011.6.145.1.1.1.34.1.25ColumnhwXponOptical10GTxAlarmUpperread-onlycurrentUpper alarm threshold of the 10G xPON optical transceiver Tx power. Unit: 0.000001dBm Options: 1. invalid(0x7FFFFFFF) - Indicates that the query fails or no in…
1.3.6.1.4.1.2011.6.145.1.1.1.34.1.26ColumnhwXponOptical10GTxAlarmLowerread-onlycurrentLower alarm threshold of the 10G xPON optical transceiver Tx power. Unit: 0.000001dBm Options: 1. invalid(0x7FFFFFFF) - Indicates that the query fails or no in…
1.3.6.1.4.1.2011.6.145.1.1.1.34.1.27ColumnhwXponOptical10GTxWarnUpperread-onlycurrentUpper warning threshold of the 10G xPON optical transceiver Tx power. Unit: 0.000001dBm Options: 1. invalid(0x7FFFFFFF) - Indicates that the query fails or no …
1.3.6.1.4.1.2011.6.145.1.1.1.34.1.28ColumnhwXponOptical10GTxWarnLowerread-onlycurrentLower warning threshold of the 10G xPON optical transceiver Tx power. Unit: 0.000001dBm Options: 1. invalid(0x7FFFFFFF) - Indicates that the query fails or no …
1.3.6.1.4.1.2011.6.145.1.1.1.34.1.29ColumnhwXponOptical10GTxBiasCurrentAlarmUpperread-onlycurrentUpper alarm threshold of the 10G xPON optical transceiver bias current. Unit: 0.000001A Options: 1. invalid(-1) - Indicates that the query fails or no informat…
1.3.6.1.4.1.2011.6.145.1.1.1.34.1.30ColumnhwXponOptical10GTxBiasCurrentAlarmLowerread-onlycurrentLower alarm threshold of the 10G xPON optical transceiver bias current. Unit: 0.000001A Options: 1. invalid(-1) - Indicates that the query fails or no informat…
1.3.6.1.4.1.2011.6.145.1.1.1.34.1.31ColumnhwXponOptical10GTxBiasCurrentWarnUpperread-onlycurrentUpper warning threshold of the 10G xPON optical transceiver bias current. Unit: 0.000001A Options: 1. invalid(-1) - Indicates that the query fails or no inform…
1.3.6.1.4.1.2011.6.145.1.1.1.34.1.32ColumnhwXponOptical10GTxBiasCurrentWarnLowerread-onlycurrentLower warning threshold of the 10G xPON optical transceiver bias current. Unit: 0.000001A Options: 1. invalid(-1) - Indicates that the query fails or no inform…
1.3.6.1.4.1.2011.6.145.1.1.1.35TablehwXponOntPortVlanExtConfigTablenot-accessiblecurrentThis table is used to configure the vlan config mode and downstream operation mode of ont port. The indexes of this table are ifIndex, hwXponOntIndex, hwXponOn…
1.3.6.1.4.1.2011.6.145.1.1.1.35.1RowhwXponOntPortVlanExtConfigEntrynot-accessiblecurrentThis table is used to configure the vlan config mode and downstream operation mode of ont port. The indexes of this entry are ifIndex, hwXponOntIndex, hwXponOn…
1.3.6.1.4.1.2011.6.145.1.1.1.35.1.1ColumnhwXponOntPortVlanExtConfigPhyTypenot-accessiblecurrentThe ONT port type. Options: 1. wifi(40) - WiFi 2. eth(47) - ETH 3. ippath(61) - IPPATH
1.3.6.1.4.1.2011.6.145.1.1.1.35.1.2ColumnhwXponOntPortVlanExtConfigPhyIndexnot-accessiblecurrentThe ONT port ID.
1.3.6.1.4.1.2011.6.145.1.1.1.35.1.3ColumnhwXponOntPortVlanConfigModeread-writecurrentThis object is used to configure vlan config mode of ont port. The configuration takes effect only when the ONT is in mode1 (interoperability mode). Options: 1…
1.3.6.1.4.1.2011.6.145.1.1.1.35.1.4ColumnhwXponOntPortVlanDownstreamOperModeread-writecurrentThis object is used to configure the vlan downstream operation mode of ont port. The configuration takes effect only when the ONT is in mode1 (interoperability…
1.3.6.1.4.1.2011.6.145.1.1.1.36TablehwXponOntPortVlanDiscardTablenot-accessiblecurrentThis table is used to configure the vlan discard mode of ont port. The indexes of this table are ifIndex, hwXponOntIndex, hwXponOntPortVlanDiscardPhyType and h…
1.3.6.1.4.1.2011.6.145.1.1.1.36.1RowhwXponOntPortVlanDiscardEntrynot-accessiblecurrentThis table is used to configure the vlan discard mode of ont port. The indexes of this entry are ifIndex, hwXponOntIndex, hwXponOntPortVlanDiscardPhyType and h…
1.3.6.1.4.1.2011.6.145.1.1.1.36.1.1ColumnhwXponOntPortVlanDiscardPhyTypenot-accessiblecurrentThe ONT port type. Options: 1. wifi(40) - WiFi 2. eth(47) - ETH 3. iphost(50) - IPHOST 4. ippath(61) - IPPATH
1.3.6.1.4.1.2011.6.145.1.1.1.36.1.2ColumnhwXponOntPortVlanDiscardPhyIndexnot-accessiblecurrentThe ONT port ID.
1.3.6.1.4.1.2011.6.145.1.1.1.36.1.3ColumnhwXponOntPortVlanDiscardModeread-writecurrentThis object is used to configure vlan config mode of ont port. The configuration takes effect only when the ONT is in mode1 (interoperability mode). Options: 1…
1.3.6.1.4.1.2011.6.145.1.1.1.37TablehwGponBoardWorkModeTablenot-accessiblecurrentThis table is used to configure the board work mode of GPON board. The indexes of this table are hwFrameIndex and hwSlotIndex.
1.3.6.1.4.1.2011.6.145.1.1.1.37.1RowhwGponBoardWorkModeEntrynot-accessiblecurrentThis table is used to configure the board work mode of GPON board. The indexes of this entry are hwFrameIndex and hwSlotIndex.
1.3.6.1.4.1.2011.6.145.1.1.1.37.1.1ColumnhwGponBoardWorkModeread-writecurrentThe GPON board work mode. Options: 1. gpon(1) - GPON work mode 2. xgpon(2) - XGPON work mode 3. xgspon(3) - XGSPON work mode 4. twdmpon(4) - TWDMPON work mode …
1.3.6.1.4.1.2011.6.145.1.1.1.38TablehwXponPortVsResourceTablenot-accessiblecurrentThis table is used to config the resource about ports in virtual system. The indexes of this table are ifIndex and hwXponPortVsId.
1.3.6.1.4.1.2011.6.145.1.1.1.38.1RowhwXponPortVsResourceEntrynot-accessiblecurrentThis table is used to config the resource about ports in virtual system. The indexes of this entry are ifIndex and hwXponPortVsId.
1.3.6.1.4.1.2011.6.145.1.1.1.38.1.1ColumnhwXponPortVsIdnot-accessiblecurrentThis object indicates the indexes of virtual system,range: 1-3. The invalid value is -1.
1.3.6.1.4.1.2011.6.145.1.1.1.38.1.2ColumnhwXponPortVsMaxOntCountread-writecurrentThis object indicates the maximum ONT number of port in virtual system,range: 1-256. The default value is -1. If the value of hwXponPortVsMaxOntCount is set to…
1.3.6.1.4.1.2011.6.145.1.1.1.38.1.3ColumnhwXponPortVsMaxGuaranteedBandwidthread-writecurrentThis object indicates the maximum guaranteed bandwidth in virtual system, the value must be greater than or equal to 128 but cannot be larger than 10000000. Un…
1.3.6.1.4.1.2011.6.145.1.1.1.38.1.4ColumnhwXponPortVsLeftGuaranteedBandwidthread-onlycurrentThis object indicates the left guaranteed bandwidth of a PON port in virtual system. Unit: kbps The invalid value is -1.
1.3.6.1.4.1.2011.6.145.1.1.1.39TablehwGponTwdmChannelGroupTablenot-accessiblecurrentThis table supports the TWDM PON channel group. The index of this table is hwGponTwdmChannelGroupId.
1.3.6.1.4.1.2011.6.145.1.1.1.39.1RowhwGponTwdmChannelGroupEntrynot-accessiblecurrentThis table supports the TWDM PON channel group. The index of this entry is hwGponTwdmChannelGroupId.
1.3.6.1.4.1.2011.6.145.1.1.1.39.1.1ColumnhwGponTwdmChannelGroupIdnot-accessiblecurrentThis object indicates the ID number of channel group.
1.3.6.1.4.1.2011.6.145.1.1.1.39.1.2ColumnhwGponTwdmChannelGroupWorkModeread-writecurrentThis object indicates the work mode of channel group. Options: 1. static(1) - static mode 2. dynamic(2) - dynamic mode 3. invalid(-1) - invalid value
1.3.6.1.4.1.2011.6.145.1.1.1.39.1.3ColumnhwGponTwdmChannelGroupMaxChannelNumberread-writecurrentThis object indicates the maximum channel number of channel group, and only can set value when create a channel group, the default value is 4.
1.3.6.1.4.1.2011.6.145.1.1.1.39.1.4ColumnhwGponTwdmChannelGroupSelectPolicyread-writecurrentThis object indicates the policy of channel group. Options: 1. payAsGrow(1) - pay as grow 2. sharing(2) - sharing 3. invalid(-1) - invalid value
1.3.6.1.4.1.2011.6.145.1.1.1.39.1.5ColumnhwGponTwdmChannelGroupStateread-onlycurrentThis object indicates the state of channel group. Options: 1. online(1) - online 2. offline(2) - offline 3. invalid(-1) - invalid value
1.3.6.1.4.1.2011.6.145.1.1.1.39.1.6ColumnhwGponTwdmChannelGroupDescriptionread-writecurrentThis object indicates the description of channel group.
1.3.6.1.4.1.2011.6.145.1.1.1.39.1.7ColumnhwGponTwdmChannelGroupRowStatusread-createcurrentRow status. This object is used to differentiate the creation, modification and deletion operations for an object. Options: 1. active(1) -indicates that the co…
1.3.6.1.4.1.2011.6.145.1.1.1.40TablehwGponTwdmChannelMemberTablenot-accessiblecurrentThis table supports the TWDM PON channel group member. The indexes of this table are hwGponTwdmChannelGroupId, hwGponTwdmChannelMemberIndex.
1.3.6.1.4.1.2011.6.145.1.1.1.40.1RowhwGponTwdmChannelMemberEntrynot-accessiblecurrentThis table supports the TWDM PON channel group member. The indexes of this entry are hwGponTwdmChannelGroupId, hwGponTwdmChannelMemberIndex.
1.3.6.1.4.1.2011.6.145.1.1.1.40.1.1ColumnhwGponTwdmChannelMemberIndexnot-accessiblecurrentThis object indicates the index of channel group member.
1.3.6.1.4.1.2011.6.145.1.1.1.40.1.2ColumnhwGponTwdmChannelMemberRoleread-writecurrentThis object indicates the role of channel group member. Options: 1. master(1) - master 2. slave(2) - slave 3. invalid(-1) - invalid value
1.3.6.1.4.1.2011.6.145.1.1.1.40.1.3ColumnhwGponTwdmChannelMemberRowStatusread-createcurrentRow status. This object is used to differentiate the creation, modification and deletion operations for an object. Options: 1. active(1) -indicates that the co…
1.3.6.1.4.1.2011.6.145.1.1.1.41TablehwXponDeviceOntPotsPortStateTablenot-accessiblecurrentThis table is used to query the state of ONT POTS port. The indexes of this table are ifIndex, hwXponOntIndex and hwXponDeviceOntPotsPortId.
1.3.6.1.4.1.2011.6.145.1.1.1.41.1RowhwXponDeviceOntPotsPortStateEntrynot-accessiblecurrentThis table is used to query the state of ONT POTS port. The indexes of this entry are ifIndex, hwXponOntIndex and hwXponDeviceOntPotsPortId.
1.3.6.1.4.1.2011.6.145.1.1.1.41.1.1ColumnhwXponDeviceOntPotsPortIdnot-accessiblecurrentONT POTS port ID.
1.3.6.1.4.1.2011.6.145.1.1.1.41.1.2ColumnhwXponDeviceOntPotsPortPTPSrvStateread-onlycurrentONT POTS port physics running state. Options: 1. normal(1) - Normal state 2. fail(2) - Fail state 3. invalidState(-1) - Returned in case of query failure or er…
1.3.6.1.4.1.2011.6.145.1.1.1.41.1.3ColumnhwXponDeviceOntPotsPortPTPAdminStateread-onlycurrentONT POTS port physics admin state. Options: 1. lock(1) - All user functions of this circuit pack are blocked, and alarm for this managed entity are no longer g…
1.3.6.1.4.1.2011.6.145.1.1.1.41.1.4ColumnhwXponDeviceOntPotsPortPTPHookStateread-onlycurrentONT POTS port physics hook state. Options: 1. onHook(1) - ONT POTS port physics is onHook 2. offHook(2) - ONT POTS port physics is offHook 3. invalidState(-1) …
1.3.6.1.4.1.2011.6.145.1.1.1.41.1.5ColumnhwXponDeviceOntPotsPortCTPSrvStateread-onlycurrentONT POTS port service running state. Options: 1. noneOrinitial(1) - None or initial state 2. registered(2) - Registered state 3. inSession(3) - In session 4. f…
1.3.6.1.4.1.2011.6.145.1.1.1.41.1.6ColumnhwXponDeviceOntPotsPortCTPSrvTyperead-onlycurrentONT POTS port service type. Options: 1. idleOrnone(1) - Idle or none type 2. twoWay(2) - Two way type 3. threeWay(3) - Three way type 4. fax(4) - Fax type 5. t…
1.3.6.1.4.1.2011.6.145.1.1.1.41.1.7ColumnhwXponDeviceOntPotsPortCTPSrvCoderead-onlycurrentONT POTS port code mode. Options: 1. pcmu(1) - Audio data is encoded as eight bits per sample, after logarithmic scaling PCMU denotes mu-law scaling. 2. reserv…
1.3.6.1.4.1.2011.6.145.1.1.2NodehwXponCommonStatisticObjects
1.3.6.1.4.1.2011.6.145.1.1.2.1TablehwGponDevicePotsPortStatisticTablenot-accessiblecurrentVOIP perform monitor statistic table. This table is used to query Pots port statistic. The indexes of this table are ifIndex, hwGponDeviceOntObjIndex and hwGpo…
1.3.6.1.4.1.2011.6.145.1.1.2.1.1RowhwGponDevicePotsPortStatisticEntrynot-accessiblecurrentVOIP perform monitor statistic table. This table is used to query Pots port statistic. The indexes of this entry are ifIndex, hwGponDeviceOntObjIndex and hwGpo…
1.3.6.1.4.1.2011.6.145.1.1.2.1.1.1ColumnhwGponDeviceOntPhyIndexnot-accessiblecurrentPort index of the ONT.
1.3.6.1.4.1.2011.6.145.1.1.2.1.1.2ColumnhwGponDevicePotsStatisticRtpErrorread-onlycurrentThe statistic of RTP packet errors.
1.3.6.1.4.1.2011.6.145.1.1.2.1.1.3ColumnhwGponDevicePotsStatisticPacketLossread-onlycurrentThe statistic of the fraction of packets lost.
1.3.6.1.4.1.2011.6.145.1.1.2.1.1.4ColumnhwGponDevicePotsPortMaxJitterread-onlycurrentThe maximum jitter identified during the measured interval.
1.3.6.1.4.1.2011.6.145.1.1.2.1.1.5ColumnhwGponDevicePotsPortMaxTimeRTCPread-onlycurrentThe maximum time between RTCP packets.
1.3.6.1.4.1.2011.6.145.1.1.2.1.1.6ColumnhwGponDevicePotsStatisticUnderFlowBuffread-onlycurrentThe statistic of times the reassembly buffer underflows.
1.3.6.1.4.1.2011.6.145.1.1.2.1.1.7ColumnhwGponDevicePotsStatisticOverFlowBuffread-onlycurrentThe statistic of times the reassembly buffer overflows.
1.3.6.1.4.1.2011.6.145.1.1.2.1.1.8ColumnhwGponDevicePotsStatisticCallSetupFailsread-onlycurrentThe statistic of call setup failures.
1.3.6.1.4.1.2011.6.145.1.1.2.1.1.9ColumnhwGponDevicePotsPortCallSetupTimerread-onlycurrentThe longest duration of a single call setup detected during this interval.
1.3.6.1.4.1.2011.6.145.1.1.2.1.1.10ColumnhwGponDevicePotsStatisticCallTerminateFailsread-onlycurrentThe statistic of calls that were terminated with cause.
1.3.6.1.4.1.2011.6.145.1.1.2.1.1.11ColumnhwGponDevicePotsStatisticAnalogPortReleaseread-onlycurrentThe statistic of analog port releases without dialling detected.
1.3.6.1.4.1.2011.6.145.1.1.2.1.1.12ColumnhwGponDevicePotsPortAnalogPortOffHookTimerread-onlycurrentThe longest period of a single off-hook detected on the analog port.
1.3.6.1.4.1.2011.6.145.1.1.2.2TablehwGponOntPerfCurr15MinDataTablenot-accessiblecurrentOnt performance monitor statistic table. This table is used to query ont statistic in the current 15 minutes. The indexes of this table are ifIndex and hwXponO…
1.3.6.1.4.1.2011.6.145.1.1.2.2.1RowhwGponOntPerfCurr15MinDataEntrynot-accessiblecurrentOnt performance monitor statistic table. This table is used to query ont statistic in the current 15 minutes. The indexes of this entry are ifIndex and hwXponO…
1.3.6.1.4.1.2011.6.145.1.1.2.2.1.1ColumnhwGponOntPerfCurr15MinFecCorrectByteread-onlycurrentCount of bytes that were corrected by the FEC function in the current 15 minutes.
1.3.6.1.4.1.2011.6.145.1.1.2.2.1.2ColumnhwGponOntPerfCurr15MinFecCorrectCodeWordsread-onlycurrentCount of code words that were corrected by the FEC function in the current 15 minutes.
1.3.6.1.4.1.2011.6.145.1.1.2.2.1.3ColumnhwGponOntPerfCurr15MinFecUncorrectCodeWordsread-onlycurrentCount of code words that were not corrected by the FEC function in the current 15 minutes.
1.3.6.1.4.1.2011.6.145.1.1.2.2.1.4ColumnhwGponOntPerfCurr15MinFecTotalCodeWordsread-onlycurrentCount of total received code words in the current 15 minutes.
1.3.6.1.4.1.2011.6.145.1.1.2.2.1.5ColumnhwGponOntPerfCurr15MinFecSecondsread-onlycurrentCount of seconds in the current 15 minutes, when there was a forward error correction anomaly.
1.3.6.1.4.1.2011.6.145.1.1.2.2.1.6ColumnhwGponOntPerfCurr15MinRangingTimeCountread-onlycurrentCount of rangingtime in the current 15 minutes.
1.3.6.1.4.1.2011.6.145.1.1.2.2.1.7ColumnhwGponOntPerfCurr15MinTransmittedGemFramesread-onlycurrentCount of transmitted XGEM frames in the current 15 minutes.
1.3.6.1.4.1.2011.6.145.1.1.2.2.1.8ColumnhwGponOntPerfCurr15MinXgemKeyErrorCountread-onlycurrentCount of XGEM key errors in the current 15 minutes.
1.3.6.1.4.1.2011.6.145.1.1.2.2.1.9ColumnhwGponOntPerfCurr15MinXgemHecErrorCountread-onlycurrentCount of XGEM hec error in the current 15 minutes.
1.3.6.1.4.1.2011.6.145.1.1.2.3TablehwGponOntPerfHis15MinTablenot-accessiblecurrentOnt performance monitor statistic table. This table is used to query ont statistic. The indexes of this table are ifIndex, hwXponOntIndex and hwGponOntPerfHis1…
1.3.6.1.4.1.2011.6.145.1.1.2.3.1RowhwGponOntPerfHis15MinEntrynot-accessiblecurrentOnt performance monitor statistic table. This table is used to query ont statistic. The indexes of this entry are ifIndex,hwXponOntIndex and hwGponOntPerfHis15…
1.3.6.1.4.1.2011.6.145.1.1.2.3.1.1ColumnhwGponOntPerfHis15MinNumbernot-accessiblecurrentPerformance data interval number 1 is the most recent previous 15 minutes interval. Rang:1.
1.3.6.1.4.1.2011.6.145.1.1.2.3.1.2ColumnhwGponOntPerfHis15MinFecCorrectByteread-onlycurrentCount of bytes that were corrected by the FEC function in this interval.
1.3.6.1.4.1.2011.6.145.1.1.2.3.1.3ColumnhwGponOntPerfHis15MinFecCorrectCodeWordsread-onlycurrentCount of code words that were corrected by the FEC function in this interval. -1 indicates the invalid value.
1.3.6.1.4.1.2011.6.145.1.1.2.3.1.4ColumnhwGponOntPerfHis15MinFecUncorrectCodeWordsread-onlycurrentCount of code words that were not corrected by the FEC function in this interval. -1 indicates the invalid value.
1.3.6.1.4.1.2011.6.145.1.1.2.3.1.5ColumnhwGponOntPerfHis15MinFecTotalCodeWordsread-onlycurrentCount of total received code words in this interval. -1 indicates the invalid value.
1.3.6.1.4.1.2011.6.145.1.1.2.3.1.6ColumnhwGponOntPerfHis15MinFecSecondsread-onlycurrentCount of seconds during this interval, when there was a forward error correction anomaly.
1.3.6.1.4.1.2011.6.145.1.1.2.3.1.7ColumnhwGponOntPerfHis15MinRangingTimeCountread-onlycurrentCount of rangingtime in this interval.
1.3.6.1.4.1.2011.6.145.1.1.2.3.1.8ColumnhwGponOntPerfHis15MinTransmittedGemFramesread-onlycurrentCount of transmitted XGEM frames in this interval.
1.3.6.1.4.1.2011.6.145.1.1.2.3.1.9ColumnhwGponOntPerfHis15MinXgemKeyErrorCountread-onlycurrentCount of XGEM key errors in this interval.
1.3.6.1.4.1.2011.6.145.1.1.2.3.1.10ColumnhwGponOntPerfHis15MinXgemHecErrorCountread-onlycurrentCount of XGEM hec error in this interval.
1.3.6.1.4.1.2011.6.145.1.1.2.4TablehwGponOntIphostStatsTablenot-accessiblecurrentThe ONT IPHOST port statistics table. The index of this table is a combination of ifIndex, hwGponDeviceOntObjIndex.
1.3.6.1.4.1.2011.6.145.1.1.2.4.1RowhwGponOntIphostStatsEntrynot-accessiblecurrentThe ONT IPHOST port statistics table. The index of this entry is a combination of ifIndex, hwGponDeviceOntObjIndex.
1.3.6.1.4.1.2011.6.145.1.1.2.4.1.1ColumnhwGponOntIphostEthernetStatisticRecvOctetsread-onlycurrentThis object indicates the received bytes.
1.3.6.1.4.1.2011.6.145.1.1.2.4.1.2ColumnhwGponOntIphostEthernetStatisticRecvPktsread-onlycurrentThis object indicates the received frames.
1.3.6.1.4.1.2011.6.145.1.1.2.4.1.3ColumnhwGponOntIphostEthernetStatisticRecvMulticastPktsread-onlycurrentThis object indicates the received multicast frames.
1.3.6.1.4.1.2011.6.145.1.1.2.4.1.4ColumnhwGponOntIphostEthernetStatisticRecvBroadcastPktsread-onlycurrentThis object indicates the received broadcast frames.
1.3.6.1.4.1.2011.6.145.1.1.2.4.1.5ColumnhwGponOntIphostEthernetStatisticRecvPkts64Octetsread-onlycurrentThis object indicates the received 64-octet frames
1.3.6.1.4.1.2011.6.145.1.1.2.4.1.6ColumnhwGponOntIphostEthernetStatisticRecvPkts65to127Octetsread-onlycurrentThis object indicates the received 65~127-octet frames
1.3.6.1.4.1.2011.6.145.1.1.2.4.1.7ColumnhwGponOntIphostEthernetStatisticRecvPkts128to255Octetsread-onlycurrentThis object indicates the received 128~255-octet frames
1.3.6.1.4.1.2011.6.145.1.1.2.4.1.8ColumnhwGponOntIphostEthernetStatisticRecvPkts256to511Octetsread-onlycurrentThis object indicates the received 256~511-octet frames.
1.3.6.1.4.1.2011.6.145.1.1.2.4.1.9ColumnhwGponOntIphostEthernetStatisticRecvPkts512to1023Octetsread-onlycurrentThis object indicates the received 512~1023-octet frames.
1.3.6.1.4.1.2011.6.145.1.1.2.4.1.10ColumnhwGponOntIphostEthernetStatisticRecvPkts1024to1518Octetsread-onlycurrentThis object indicates the received 1024~1518-octet frames.
1.3.6.1.4.1.2011.6.145.1.1.2.4.1.11ColumnhwGponOntIphostEthernetStatisticRecvPktsOversizeread-onlycurrentThis object indicates the received oversize frames.
1.3.6.1.4.1.2011.6.145.1.1.2.4.1.12ColumnhwGponOntIphostEthernetStatisticRecvPktsUndersizeread-onlycurrentThis object indicates the received undersize frames.
1.3.6.1.4.1.2011.6.145.1.1.2.4.1.13ColumnhwGponOntIphostEthernetStatisticRecvFCSErrorsread-onlycurrentThis object indicates the received FCS error frames.
1.3.6.1.4.1.2011.6.145.1.1.2.4.1.14ColumnhwGponOntIphostEthernetStatisticRecvDropEventsread-onlycurrentThis object indicates the received drop events.
1.3.6.1.4.1.2011.6.145.1.1.2.4.1.15ColumnhwGponOntIphostEthernetStatisticSendOctetsread-onlycurrentThis object indicates the sent bytes.
1.3.6.1.4.1.2011.6.145.1.1.2.4.1.16ColumnhwGponOntIphostEthernetStatisticSendPktsread-onlycurrentThis object indicates the sent frames.
1.3.6.1.4.1.2011.6.145.1.1.2.4.1.17ColumnhwGponOntIphostEthernetStatisticMulticastSendPktsread-onlycurrentThis object indicates the sent multicast frames.
1.3.6.1.4.1.2011.6.145.1.1.2.4.1.18ColumnhwGponOntIphostEthernetStatisticSendBroadcastPktsread-onlycurrentThis object indicates the sent broadcast frames.
1.3.6.1.4.1.2011.6.145.1.1.2.4.1.19ColumnhwGponOntIphostEthernetStatisticSendPkts64Octetsread-onlycurrentThis object indicates the sent 64-octet frames
1.3.6.1.4.1.2011.6.145.1.1.2.4.1.20ColumnhwGponOntIphostEthernetStatisticSendPkts65to127Octetsread-onlycurrentThis object indicates the sent 65~127-octet frames
1.3.6.1.4.1.2011.6.145.1.1.2.4.1.21ColumnhwGponOntIphostEthernetStatisticSendPkts128to255Octetsread-onlycurrentThis object indicates the sent 128~255-octet frames
1.3.6.1.4.1.2011.6.145.1.1.2.4.1.22ColumnhwGponOntIphostEthernetStatisticSendPkts256to511Octetsread-onlycurrentThis object indicates the sent 256~511-octet frames.
1.3.6.1.4.1.2011.6.145.1.1.2.4.1.23ColumnhwGponOntIphostEthernetStatisticSendPkts512to1023Octetsread-onlycurrentThis object indicates the sent 512~1023-octet frames.
1.3.6.1.4.1.2011.6.145.1.1.2.4.1.24ColumnhwGponOntIphostEthernetStatisticSendPkts1024to1518Octetsread-onlycurrentThis object indicates the sent 1024~1518-octet frames.
1.3.6.1.4.1.2011.6.145.1.1.2.4.1.25ColumnhwGponOntIphostEthernetStatisticSendPktsOversizeread-onlycurrentThis object indicates the sent oversize frames.
1.3.6.1.4.1.2011.6.145.1.1.2.4.1.26ColumnhwGponOntIphostEthernetStatisticForwardDropEventsread-onlycurrentThis object indicates the sent drop events.
1.3.6.1.4.1.2011.6.145.1.1.2.4.1.60ColumnhwGponOntIphostEthernetStatisticClearread-writecurrentThis object is used to clear the statistics. Options: 1. clear(1) - Indicates that clear the statistics 2. invalid(-1) - Indicates that the query fails or no i…
1.3.6.1.4.1.2011.6.145.1.1.2.5TablehwGponOntPerfEverbeforeDataTablenot-accessiblecurrentOnt performance monitor statistic table. This table is used to query ont ever before statistic. The indexes of this table are a combination of ifIndex and hwXp…
1.3.6.1.4.1.2011.6.145.1.1.2.5.1RowhwGponOntPerfEverbeforeDataEntrynot-accessiblecurrentOnt performance monitor statistic table. This table is used to query ont ever before statistic. The indexes of this entry are a combination of ifIndex and hwXp…
1.3.6.1.4.1.2011.6.145.1.1.2.5.1.1ColumnhwGponOntEverbeforeDownFrameFecCorrectedBytesread-onlycurrentCount of bytes that were corrected by the FEC function ever before
1.3.6.1.4.1.2011.6.145.1.1.2.5.1.2ColumnhwGponOntEverbeforeDownFrameFecCorrectedCodeWordsread-onlycurrentCount of code words that were corrected by the FEC function ever before.
1.3.6.1.4.1.2011.6.145.1.1.2.5.1.3ColumnhwGponOntEverbeforeDownFrameFecUncorrectableCodeWordsread-onlycurrentCount of code words that were not corrected by the FEC function ever before.
1.3.6.1.4.1.2011.6.145.1.1.2.5.1.4ColumnhwGponOntEverbeforeDownFrameTotalRecCodeWordsread-onlycurrentCount of total received code words ever before.
1.3.6.1.4.1.2011.6.145.1.1.2.5.1.5ColumnhwGponOntEverbeforeDownFrameFecSecondsread-onlycurrentCount of seconds ever before, when there was a forward error correction anomaly.
1.3.6.1.4.1.2011.6.145.1.1.2.5.1.6ColumnhwGponOntEverbeforeRangingTimeCountread-onlycurrentCount of rangingtime ever before.
1.3.6.1.4.1.2011.6.145.1.1.2.5.1.7ColumnhwGponOntEverbeforeTransmittedGemFramesread-onlycurrentCount of transmitted XGEM frames ever before.
1.3.6.1.4.1.2011.6.145.1.1.2.5.1.8ColumnhwGponOntEverbeforeXgemKeyErrorCountread-onlycurrentCount of XGEM key errors ever before.
1.3.6.1.4.1.2011.6.145.1.1.2.5.1.9ColumnhwGponOntEverbeforeXgemHecErrorCountread-onlycurrentCount of XGEM hec error ever before.
1.3.6.1.4.1.2011.6.145.1.1.2.6Tablehw10GponOltOpticsModuleInformationTablenot-accessiblecurrentThis table is used to query the information about the optical transceiver. The index of this table is ifIndex.
1.3.6.1.4.1.2011.6.145.1.1.2.6.1Rowhw10GponOltOpticsModuleInformationEntrynot-accessiblecurrentThis table is used to query the information about the optical transceiver. The index of this entry is ifIndex.
1.3.6.1.4.1.2011.6.145.1.1.2.6.1.1Columnhw10GponOltOpticsModuleInfoIdentifierread-onlycurrentThis object indicates the type of serial transceiver. Options: 1. unknown(0) - Unknown or unspecified 2. gbic(1) - GBIC 3. solderedToMotherBoard(2) - Module so…
1.3.6.1.4.1.2011.6.145.1.1.2.6.1.2Columnhw10GponOltOpticsModuleInfoExtCLEICoderead-onlycurrentThis object indicates the extclei code. Options: 1. nonExtCLEICode(0) - No CLEI code present in Table 02h 2. extCLEICode(1) - CLEI code present in Table 02h 3.…
1.3.6.1.4.1.2011.6.145.1.1.2.6.1.3Columnhw10GponOltOpticsModuleInfoExtTXRefClockread-onlycurrentThis object indicates the txref clock. Options: 1. nonExtTXRefClock(0) - TX Ref Clock Input Not Required 2. extTXRefClock(1) - TX Ref Clock Input Required 3. i…
1.3.6.1.4.1.2011.6.145.1.1.2.6.1.4Columnhw10GponOltOpticsModuleInfoExtCDRFuncread-onlycurrentThis object indicates the CDR function. Options: 1. nonExtCDRFunc(0) - Non-CDR version of XFP 2. extCDRFunc(1) - Module with CDR function 3. invalid(-1) - Indi…
1.3.6.1.4.1.2011.6.145.1.1.2.6.1.5Columnhw10GponOltOpticsModuleInfoExtPowerLevelread-onlycurrentThis object indicates the power level. Options: 1. extPowerLevel1(0) - Power Level 1 Module (1.5 W max. power dissipation.) 2. extPowerLevel2(1) - Power Level …
1.3.6.1.4.1.2011.6.145.1.1.2.6.1.6Columnhw10GponOltOpticsModuleInfoConnectorread-onlycurrentThis object indicates the code for connector type. Options: 1. unknown(1) - Unknown 2. sc(2) - SC 3. style1Connector(3) - Fibre Channel Style 1 copper connecto…
1.3.6.1.4.1.2011.6.145.1.1.2.6.1.7Columnhw10GponOltOpticsModuleInfoEncodingRZread-onlycurrentThis object indicates the EncodingRZ. Options: 1. nonEncodingRZ(0) - Encoding Don't Support RZ 2. encodingRZ(1) - Encoding Support RZ 3. invalid(-1) - Indicate…
1.3.6.1.4.1.2011.6.145.1.1.2.6.1.8Columnhw10GponOltOpticsModuleInfoEncodingNRZread-onlycurrentThis object indicates the EncodingNRZ. Options: 1. nonEncodingNRZ(0) - Encoding Don't Support NRZ 2. encodingNRZ(1) - Encoding Support NRZ 3. invalid(-1) - Ind…
1.3.6.1.4.1.2011.6.145.1.1.2.6.1.9Columnhw10GponOltOpticsModuleInfoEncoding8B10Bread-onlycurrentThis object indicates the Encoding8B10B. Options: 1. nonEncoding8B10B(0) - Encoding Don't Support 8B10B 2. encoding8B10B(1) - Encoding Support 8B10B 3. invalid…
1.3.6.1.4.1.2011.6.145.1.1.2.6.1.10Columnhw10GponOltOpticsModuleInfoEncoding64Bread-onlycurrentThis object indicates the Encoding64B. Options: 1. nonEncoding64B(0) - Encoding Don't Support 64B/66B 2. encoding64B(1) - Encoding Support 64B/66B 3. invalid(-…
1.3.6.1.4.1.2011.6.145.1.1.2.6.1.11Columnhw10GponOltOpticsModuleInfoBrMinread-onlycurrentMinimum bit rate, units of 100 MBits/s
1.3.6.1.4.1.2011.6.145.1.1.2.6.1.12Columnhw10GponOltOpticsModuleInfoBrMaxread-onlycurrentMaximum bit rate, units of 100 MBits/s
1.3.6.1.4.1.2011.6.145.1.1.2.6.1.13Columnhw10GponOltOpticsModuleInfoSupportLenSMFread-onlycurrentLink length supported for SMF fiber in km
1.3.6.1.4.1.2011.6.145.1.1.2.6.1.14Columnhw10GponOltOpticsModuleInfoSupportLenE50umread-onlycurrentLink length supported for EBW 50/125 um fiber, units of 2 m
1.3.6.1.4.1.2011.6.145.1.1.2.6.1.15Columnhw10GponOltOpticsModuleInfoSupportLen50umread-onlycurrentLink length supported for 50/125 um fiber, units of 1 m
1.3.6.1.4.1.2011.6.145.1.1.2.6.1.16Columnhw10GponOltOpticsModuleInfoSupportLen62p5umread-onlycurrentLink length supported for 62.5/125 um fiber, units of 1 m
1.3.6.1.4.1.2011.6.145.1.1.2.6.1.17Columnhw10GponOltOpticsModuleInfoSupportLenCopperread-onlycurrentLink length supported for copper, units of 1m
1.3.6.1.4.1.2011.6.145.1.1.2.6.1.18Columnhw10GponOltOpticsModuleInfoTransmitterSupportread-onlycurrentThis object indicates the transmitter support. Options: 1. nonTunable(0) - Transmitter Not Support Tunable 2. tunable(1) - Transmitter Support Tunable 3. inval…
1.3.6.1.4.1.2011.6.145.1.1.2.6.1.19Columnhw10GponOltOpticsModuleInfoDetectorread-onlycurrentThis object indicates the transmitter support. Options: 1. pin(0) - PIN 2. apd(1) - APD 3. invalid(-1) - Indicates that the query fails or no information is de…
1.3.6.1.4.1.2011.6.145.1.1.2.6.1.20Columnhw10GponOltOpticsModuleInfoCooledTransmitterDeviceread-onlycurrentThis object indicates the wavelength control. Options: 1. nonSupport(0) - Wavelength control NonSupport 2. support(1) - Wavelength control Support 3. invalid(-…
1.3.6.1.4.1.2011.6.145.1.1.2.6.1.21Columnhw10GponOltOpticsModuleInfoWavelengthControlread-onlycurrentThis object indicates the cooled transmitter device. Options: 1. nonSupport(0) - Cooled transmitter device NonSupport 2. support(1) - Cooled transmitter device…
1.3.6.1.4.1.2011.6.145.1.1.2.6.1.22Columnhw10GponOltOpticsModuleInfoTransmitterTechnologySupportread-onlycurrentThis object indicates the transmitter technology support. Options: 1. vCSEL850(0) - vCSEL850 2. vCSEL1310(1) - vCSEL1310 3. vCSEL1550(2) - vCSEL1550 4. fP1310(…
1.3.6.1.4.1.2011.6.145.1.1.2.6.1.23Columnhw10GponOltOpticsModuleInfoVendorNameread-onlycurrentThis object indicates the SFP vendor name (ASCII).
1.3.6.1.4.1.2011.6.145.1.1.2.6.1.24Columnhw10GponOltOpticsModuleInfoSupportXFIModeread-onlycurrentThis object indicates the XFI mode. Options: 1. nonSupportXFIMode(0) - Don't Support XFI Loopback Mode 2. supportXFIMode(1) - XFI Loopback Mode Supported 3. in…
1.3.6.1.4.1.2011.6.145.1.1.2.6.1.25Columnhw10GponOltOpticsModuleInfoSupportLinesideModeread-onlycurrentThis object indicates the XFI mode. Options: 1. nonSupportLinesideMode(0) - Don't Support Lineside Loopback Mode 2. supportLinesideMode(1) - Lineside Loopback …
1.3.6.1.4.1.2011.6.145.1.1.2.6.1.26Columnhw10GponOltOpticsModuleInfoMaxBitRateSupportedByCDRread-onlycurrentThis object indicates the max bit rate by CDR. Options: 1. cdrNosupport(0) - CDR not support 2. maxBitRateSupportedByCDR11p1(1) - CDR support for 11.1 Gb/s 3. …
1.3.6.1.4.1.2011.6.145.1.1.2.6.1.27Columnhw10GponOltOpticsModuleInfoVendorOUIread-onlycurrentThis object indicates the Vendor OUI.
1.3.6.1.4.1.2011.6.145.1.1.2.6.1.28Columnhw10GponOltOpticsModuleInfoVendorPNread-onlycurrentThis object indicates the Vendor PN.
1.3.6.1.4.1.2011.6.145.1.1.2.6.1.29Columnhw10GponOltOpticsModuleInfoVendorRevread-onlycurrentThis object indicates the Vendor rev.
1.3.6.1.4.1.2011.6.145.1.1.2.6.1.30Columnhw10GponOltOpticsModuleInfoF51read-onlycurrentThis object indicates the Wavelength.
1.3.6.1.4.1.2011.6.145.1.1.2.6.1.31Columnhw10GponOltOpticsModuleInfoWaveToleranceread-onlycurrentThis object indicates the Wavelength.
1.3.6.1.4.1.2011.6.145.1.1.2.6.1.32Columnhw10GponOltOpticsModuleInfoMaxCaseTemperatureread-onlycurrentThis object indicates the Maximum Case Temperature in Degrees C.
1.3.6.1.4.1.2011.6.145.1.1.2.6.1.33Columnhw10GponOltOpticsModuleInfoCcbaseread-onlycurrentThis object indicates the Cc_base.
1.3.6.1.4.1.2011.6.145.1.1.2.6.1.34Columnhw10GponOltOpticsModuleInfoMaxDissipationread-onlycurrentThis object indicates the Maximum Power Dissipation.
1.3.6.1.4.1.2011.6.145.1.1.2.6.1.35Columnhw10GponOltOpticsModuleInfoMaxDissipationPowerDownModeread-onlycurrentThis object indicates the Maximum Total Power Dissipation in Power Down Mode.
1.3.6.1.4.1.2011.6.145.1.1.2.6.1.36Columnhw10GponOltOpticsModuleInfoMaximum5P0VSupplyread-onlycurrentThis object indicates the Maximum current required by +5V Supply.
1.3.6.1.4.1.2011.6.145.1.1.2.6.1.37Columnhw10GponOltOpticsModuleInfoMaximum3P3VSupplyread-onlycurrentThis object indicates the Maximum current required by +3.3V Supply.
1.3.6.1.4.1.2011.6.145.1.1.2.6.1.38Columnhw10GponOltOpticsModuleInfoMaximum1P8VSupplyread-onlycurrentThis object indicates the Maximum current required by +1.8V Supply.
1.3.6.1.4.1.2011.6.145.1.1.2.6.1.39Columnhw10GponOltOpticsModuleInfoMaximum5P2VSupplyread-onlycurrentThis object indicates the Maximum current required by -5.2V Supply.
1.3.6.1.4.1.2011.6.145.1.1.2.6.1.40Columnhw10GponOltOpticsModuleInfoVendorSNread-onlycurrentThis object indicates the Vendor SN.
1.3.6.1.4.1.2011.6.145.1.1.2.6.1.41Columnhw10GponOltOpticsModuleInfoDateCoderead-onlycurrentThis object indicates the Date code.
1.3.6.1.4.1.2011.6.145.1.1.2.6.1.42Columnhw10GponOltOpticsModuleInfoDiagnoMonitorPowerMeasureread-onlycurrentThis object indicates the Received power measurement type. Options: 1. supportOMA(0) - OMA 2. supportAveragePower(1) - Average Power 3. invalid(-1) - Indicates…
1.3.6.1.4.1.2011.6.145.1.1.2.6.1.43Columnhw10GponOltOpticsModuleInfoDiagnoMonitorTypeFECBERread-onlycurrentThis object indicates the Module Respond to FEC BER. Options: 1. nonSupportBER(0) - No BER Support 2. supportBER(1) - BER Support 3. invalid(-1) - Indicates th…
1.3.6.1.4.1.2011.6.145.1.1.2.6.1.44Columnhw10GponOltOpticsModuleInfoEnhancedOptionsread-onlycurrentIndicates which optional enhanced features are implemented. bit Description of Enhanced Options 7 -Module Supports Optional VPS 6 -Optional Soft TX_DISABLE imp…
1.3.6.1.4.1.2011.6.145.1.1.2.6.1.45Columnhw10GponOltOpticsModuleInfoAuxInputOneread-onlycurrentThis object indicates the optics Aux Input One. Options: 1. auxInputType1(0) - Auxiliary monitoring not implemented 2. auxInputType2(1) - APD Bias Voltage 3. a…
1.3.6.1.4.1.2011.6.145.1.1.2.6.1.46Columnhw10GponOltOpticsModuleInfoAuxInputTworead-onlycurrentThis object indicates the optics Aux Input One. Options: 1. auxInputType1(0) - Auxiliary monitoring not implemented 2. auxInputType2(1) - APD Bias Voltage 3. a…
1.3.6.1.4.1.2011.6.145.1.1.2.6.1.47Columnhw10GponOltOpticsModuleInfoCCEXTread-onlycurrentThis object indicates the CC_EXT .
1.3.6.1.4.1.2011.6.145.1.1.2.6.1.48Columnhw10GponOltOpticsModuleInfoWavelengthFor2d5Gread-onlycurrentThis object indicates the Wavelength for 2.5G.
1.3.6.1.4.1.2011.6.145.1.1.2.6.1.49Columnhw10GponOltOpticsModuleInfoWavelengthFor1d25Gread-onlycurrentThis object indicates the Wavelength for 1.25G.
1.3.6.1.4.1.2011.6.145.1.1.2.6.1.50Columnhw10GponOltOpticsModuleInfoVendorSpecificread-onlycurrentThis object indicates the Vendor specific.
1.3.6.1.4.1.2011.6.145.1.1.2.6.1.51Columnhw10GponOltOpticsModuleXponTyperead-onlycurrentThis object indicates the module type. Options: 1. unknown(1) - Unknown 2. gpon(2) - GPON 3. epon(3) - EPON 4. epon10g(4) - 10G EPON 5. xgpon(5) - XG-PON 6. wd…
1.3.6.1.4.1.2011.6.145.1.1.2.6.1.52Columnhw10GponOltOpticsModuleXponSubTyperead-onlycurrentThis object indicates the sub module type. Options: 1. unknown(1) - Unknown 2. classbplus(101) - CLASS B+ 3. classcplus(102) - CLASS C+ 4. classb(103) - CLASS …
1.3.6.1.4.1.2011.6.145.1.1.2.6.1.53Columnhw10GponOltOpticsModuleXponUsedTyperead-onlycurrentThis object indicates the application scenario of the optical transceiver. Options: 1. unknown(1) - Unknown 2. olt(2) - OLT 3. ont(3) - ONT 4. onu(4) - ONU 5. …
1.3.6.1.4.1.2011.6.145.1.1.2.6.1.54Columnhw10GponOltOpticsModuleXponEncapsulationTyperead-onlycurrentThis object indicates the encapsulation information about the optical transceiver. Options: 1. unknown(1) - Unknown 2. sff2x5(2) - SFF 2x5 3. sff2x10(3) - SFF …
1.3.6.1.4.1.2011.6.145.1.1.2.6.1.55Columnhw10GponOltOpticsModuleXponTemperatureLevelread-onlycurrentThis object indicates the application scenario of the optical transceiver. Options: 1. unknown(1) - Unknown 2. commercial(2) - commercial 3. industry(3) - indu…
1.3.6.1.4.1.2011.6.145.1.1.2.6.1.56Columnhw10GponOltOpticsModuleXponOPMprecisionread-onlycurrentThis object indicates the OPM precision. Options: 1. unknown(1) - Unknown 2. db3(2) - 3db 3. db1(3) - 1db 4. invalid(-1) - Indicates that the query fails or no…
1.3.6.1.4.1.2011.6.145.1.1.2.6.1.57Columnhw10GponOltOpticsModuleInfoCcBaseStateread-onlycurrentThis object indicates the CC_BASE match state. Options: 1. correct (1) - Correct 2. incorrect(2) - Incorrect 3. invalid (-1) - Indicates that the query fails o…
1.3.6.1.4.1.2011.6.145.1.1.2.6.1.58Columnhw10GponOltOpticsModuleInfoCcExtStateread-onlycurrentThis object indicates the CC_EXT match state. Options: 1. correct (1) - Correct 2. incorrect(2) - Incorrect 3. invalid (-1) - Indicates that the query fails or…
1.3.6.1.4.1.2011.6.145.1.1.2.6.1.59Columnhw10GponOltOpticsModuleInfoWaveLengthread-onlycurrentThis object indicates the Wavelength, unit:0.01nm.
1.3.6.1.4.1.2011.6.145.1.1.2.6.1.60Columnhw10GponOltOpticsModuleComboModeread-onlycurrentThis object indicates the ComboMode. Options: 1. wdm (1) - wavelength division 2. tdm(2) - time division 3. invalid (-1) - Indicates that the query fails or no…
1.3.6.1.4.1.2011.6.145.1.1.2.7TablehwGponCommonOntStatisticTablenot-accessiblecurrentThis table is used to query the information about the priority queue alarm. The indexes of this table are ifIndex and hwXponOntIndex.
1.3.6.1.4.1.2011.6.145.1.1.2.7.1RowhwGponCommonOntStatisticEntrynot-accessiblecurrentThis table is used to query the information about the priority queue alarm. The indexes of this entry are ifIndex and hwXponOntIndex.
1.3.6.1.4.1.2011.6.145.1.1.2.7.1.1ColumnhwXponOntUpstreamPQDiscardedBytesAlarmCountread-onlycurrentThis object indicates the number of the upstream priority queue alarm due to buffer overflow. One record uses 6 bytes : T-CONT index(1byte)+PQ number(1byte)+al…
1.3.6.1.4.1.2011.6.145.1.1.2.7.1.2ColumnhwXponOntDownstreamPQDiscardedBytesAlarmCountread-onlycurrentThis object indicates the number of the downstream priority queue alarm due to buffer overflow. One record uses 8 bytes : port type(1byte)+port index(1byte)+re…
1.3.6.1.4.1.2011.6.145.1.1.2.7.1.3ColumnhwXponOntPQDiscardedBytesAlarmCountClearread-writecurrentThis object is used to clear the statistics. Options: 1. clear(1) - Indicates that clear the statistics 2. invalid(-1) - Indicates that the query fails or no i…
1.3.6.1.4.1.2011.6.145.1.1.2.8TablehwXponOntStatProbeConfigTablenot-accessiblecurrentThis table is used to configure statistical probe. The indexes of this table are ifIndex, hwXponOntIndex and hwXponOntStatProbeConfigIndex.
1.3.6.1.4.1.2011.6.145.1.1.2.8.1RowhwXponOntStatProbeConfigEntrynot-accessiblecurrentThis table is used to configure statistical probe. The indexes of this entry are ifIndex, hwXponOntIndex and hwXponOntStatProbeConfigIndex.
1.3.6.1.4.1.2011.6.145.1.1.2.8.1.1ColumnhwXponOntStatProbeConfigIndexnot-accessiblecurrentIndex of the statistical probe. Range: 1-2147483647, and -1. Value -1 must be issued when this index is configured. Then, the device allocates actual index to …
1.3.6.1.4.1.2011.6.145.1.1.2.8.1.2ColumnhwXponOntStatProbeConfigTyperead-writecurrentThis object Indicates the type of statistic probe. Options: 1. vlanBased(1) - Indicates that the statistics are collected by ONT port, VLAN and VLAN priority. …
1.3.6.1.4.1.2011.6.145.1.1.2.8.1.3ColumnhwXponOntStatProbeConfigParameterread-writecurrentThis node indicates the detailed configurations of the statistical probe. If the type of the probe is vlanBased, the format of this node is 'AABBCCCCDD'. AA: I…
1.3.6.1.4.1.2011.6.145.1.1.2.8.1.4ColumnhwXponOntStatProbeConfigRowStatusread-createcurrentthis object is used to create a new row or to modify or delete an existing row in this table. Options: 1. createAndGo(4) -create a new instance of a conceptual…
1.3.6.1.4.1.2011.6.145.1.1.2.9TablehwXponOntProbeStatTablenot-accessiblecurrentThis table is used to query probe statistics. The indexes of this table are ifIndex, hwXponOntIndex and hwXponOntStatProbeConfigIndex.
1.3.6.1.4.1.2011.6.145.1.1.2.9.1RowhwXponOntProbeStatEntrynot-accessiblecurrentThis table is used to query probe statistics. The indexes of this entry are ifIndex, hwXponOntIndex and hwXponOntStatProbeConfigIndex.
1.3.6.1.4.1.2011.6.145.1.1.2.9.1.1ColumnhwXponOntProbeStatResultread-onlycurrentThis node identifies the result of queried probe statistics. Value 0 indicates that probe statistics are queried successfully.
1.3.6.1.4.1.2011.6.145.1.1.2.9.1.2ColumnhwXponOntProbeStatRecvBytesread-onlycurrentThis object indicates the received bytes.
1.3.6.1.4.1.2011.6.145.1.1.2.9.1.3ColumnhwXponOntProbeStatRecvFramesread-onlycurrentThis object indicates the received frames.
1.3.6.1.4.1.2011.6.145.1.1.2.9.1.4ColumnhwXponOntProbeStatSendBytesread-onlycurrentThis object indicates the sent bytes.
1.3.6.1.4.1.2011.6.145.1.1.2.9.1.5ColumnhwXponOntProbeStatSendFramesread-onlycurrentThis object indicates the sent frames.
1.3.6.1.4.1.2011.6.145.1.1.2.9.1.6ColumnhwXponOntProbeStatClearread-writecurrentThis node is used to clear probe statistics. Options: 1. clear(1) - Indicates that clear probe statistics. 2. invalid(-1) - Indicates that the query fails or n…
1.3.6.1.4.1.2011.6.145.1.1.2.10TablehwGponOntMulticastGemPortStatisticTablenot-accessiblecurrentThe ONT Multicast GEM Port statistics table. The index of this table is a combination of ifIndex and hwXponOntIndex.
1.3.6.1.4.1.2011.6.145.1.1.2.10.1RowhwGponOntMulticastGemPortStatisticEntrynot-accessiblecurrentThe ONT Multicast GEM Port statistics table. The index of this entry is a combination of ifIndex and hwXponOntIndex.
1.3.6.1.4.1.2011.6.145.1.1.2.10.1.1ColumnhwGponOntMulticastGemPortStatisticRecvLostFramesread-onlycurrentThis object indicates the loss of frames.
1.3.6.1.4.1.2011.6.145.1.1.2.10.1.2ColumnhwGponOntMulticastGemPortStatisticRecvMisinsertedFramesread-onlycurrentThis object indicates the misinserted frames.
1.3.6.1.4.1.2011.6.145.1.1.2.10.1.3ColumnhwGponOntMulticastGemPortStatisticRecvFramesread-onlycurrentThis object indicates the received frames.
1.3.6.1.4.1.2011.6.145.1.1.2.10.1.4ColumnhwGponOntMulticastGemPortStatisticRecvBlocksread-onlycurrentThis object indicates the received blocks.
1.3.6.1.4.1.2011.6.145.1.1.2.10.1.5ColumnhwGponOntMulticastGemPortStatisticSendBlocksread-onlycurrentThis object indicates the sent blocks.
1.3.6.1.4.1.2011.6.145.1.1.2.10.1.6ColumnhwGponOntMulticastGemPortStatisticImpairedBlocksread-onlycurrentThis object indicates the number of received impaired data blocks.
1.3.6.1.4.1.2011.6.145.1.1.2.10.1.7ColumnhwGponOntMulticastGemPortStatisticSendGemFramesread-onlycurrentThis object indicates the number of transmitted GEM frames.
1.3.6.1.4.1.2011.6.145.1.1.2.10.1.20ColumnhwGponOntMulticastGemPortStatisticClearread-writecurrentThis object is used to clear the statistics. Options: 1. clear(1) - Indicates that clear the statistics 2. invalid(-1) - Indicates that the query fails or no i…
1.3.6.1.4.1.2011.6.145.1.1.2.11TablehwGponOntTdmPortPerf15MinTablenot-accessiblecurrentThis table is used to query ONT TDM port statistics in history 15 minutes. The indexes of this table are ifIndex, hwXponOntIndex, hwGponDeviceOntPhyIndex and h…
1.3.6.1.4.1.2011.6.145.1.1.2.11.1RowhwGponOntTdmPortPerf15MinEntrynot-accessiblecurrentThis table is used to query ONT TDM port statistics in history 15 minutes. The indexes of this entry are ifIndex, hwXponOntIndex, hwGponDeviceOntPhyIndex and h…
1.3.6.1.4.1.2011.6.145.1.1.2.11.1.1ColumnhwGponOntTdmPortPerf15minIntervalNumnot-accessiblecurrentThis object indicates the history 15 minutes interval number. value 0 indicates current 15 minutes interval.
1.3.6.1.4.1.2011.6.145.1.1.2.11.1.2ColumnhwGponOntTdmPortPerf15minESread-onlycurrentThis object indicates the statistic of the errored seconds. -1 indicates the invalid value.
1.3.6.1.4.1.2011.6.145.1.1.2.11.1.3ColumnhwGponOntTdmPortPerf15minSESread-onlycurrentThis object indicates the statistic of the serverly erroeds. -1 indicates the invalid value.
1.3.6.1.4.1.2011.6.145.1.1.2.11.1.4ColumnhwGponOntTdmPortPerf15minUASread-onlycurrentThis object indicates the statistic of the unavailable seconds. -1 indicates the invalid value.
1.3.6.1.4.1.2011.6.145.1.1.2.11.1.5ColumnhwGponOntTdmPortPerf15minEFSread-onlycurrentThis object indicates the statistic of the error free seconds. -1 indicates the invalid value.
1.3.6.1.4.1.2011.6.145.1.1.2.12TablehwGponDevicePotsPortHis15MinStatisticTablenot-accessiblecurrentVOIP perform monitor statistic table. This table is used to query Pots port statistic. The indexes of this table are ifIndex, hwGponDeviceOntObjIndex and hwGpo…
1.3.6.1.4.1.2011.6.145.1.1.2.12.1RowhwGponDevicePotsPortHis15MinStatisticEntrynot-accessiblecurrentVOIP perform monitor statistic table. This table is used to query Pots port statistic. The indexes of this entry are ifIndex, hwGponDeviceOntObjIndex and hwGpo…
1.3.6.1.4.1.2011.6.145.1.1.2.12.1.1ColumnhwGponDevicePotsPortHis15MinNumberread-onlycurrentStatistic data interval number 1 is the most recent previous 15 minutes interval. Rang:1.
1.3.6.1.4.1.2011.6.145.1.1.2.12.1.2ColumnhwGponDevicePotsHis15MinStatisticRtpErrorread-onlycurrentThe statistic of RTP packet errors.
1.3.6.1.4.1.2011.6.145.1.1.2.12.1.3ColumnhwGponDevicePotsHis15MinStatisticPacketLossread-onlycurrentThe statistic of the fraction of packets lost.
1.3.6.1.4.1.2011.6.145.1.1.2.12.1.4ColumnhwGponDevicePotsPortHis15MinMaxJitterread-onlycurrentThe maximum jitter identified during the measured interval.
1.3.6.1.4.1.2011.6.145.1.1.2.12.1.5ColumnhwGponDevicePotsPortHis15MinMaxTimeRTCPread-onlycurrentThe maximum time between RTCP packets.
1.3.6.1.4.1.2011.6.145.1.1.2.12.1.6ColumnhwGponDevicePotsHis15MinStatisticUnderFlowBuffread-onlycurrentThe statistic of times the reassembly buffer underflows.
1.3.6.1.4.1.2011.6.145.1.1.2.12.1.7ColumnhwGponDevicePotsHis15MinStatisticOverFlowBuffread-onlycurrentThe statistic of times the reassembly buffer overflows.
1.3.6.1.4.1.2011.6.145.1.1.2.12.1.8ColumnhwGponDevicePotsHis15MinStatisticCallSetupFailsread-onlycurrentThe statistic of call setup failures.
1.3.6.1.4.1.2011.6.145.1.1.2.12.1.9ColumnhwGponDevicePotsPortHis15MinCallSetupTimerread-onlycurrentThe longest duration of a single call setup detected during this interval.
1.3.6.1.4.1.2011.6.145.1.1.2.12.1.10ColumnhwGponDevicePotsHis15MinStatisticCallTerminateFailsread-onlycurrentThe statistic of calls that were terminated with cause.
1.3.6.1.4.1.2011.6.145.1.1.2.12.1.11ColumnhwGponDevicePotsHis15MinStatisticAnalogPortReleaseread-onlycurrentThe statistic of analog port releases without dialling detected.
1.3.6.1.4.1.2011.6.145.1.1.2.12.1.12ColumnhwGponDevicePotsPortHis15MinAnalogPortOffHookTimerread-onlycurrentThe longest period of a single off-hook detected on the analog port.
1.3.6.1.4.1.2011.6.145.1.1.2.13TablehwXponOntPortEthernetStatsTablenot-accessiblecurrentThe ONT port statistics table. The indexes of this table are ifIndex, hwXponOntIndex, hwGponOntifType and hwGponOntifPort.
1.3.6.1.4.1.2011.6.145.1.1.2.13.1RowhwXponOntPortEthernetStatsEntrynot-accessiblecurrentThe ONT port statistics table. The indexes of this entry are ifIndex, hwXponOntIndex, hwGponOntifType and hwGponOntifPort.
1.3.6.1.4.1.2011.6.145.1.1.2.13.1.1ColumnhwXponOntPortEthernetStatisticRecvOctetsread-onlycurrentThis object indicates the received bytes.
1.3.6.1.4.1.2011.6.145.1.1.2.13.1.2ColumnhwXponOntPortEthernetStatisticRecvPktsread-onlycurrentThis object indicates the received frames.
1.3.6.1.4.1.2011.6.145.1.1.2.13.1.3ColumnhwXponOntPortEthernetStatisticRecvBroadcastPktsread-onlycurrentThis object indicates the received broadcast frames.
1.3.6.1.4.1.2011.6.145.1.1.2.13.1.4ColumnhwXponOntPortEthernetStatisticRecvMulticastPktsread-onlycurrentThis object indicates the received multicast frames.
1.3.6.1.4.1.2011.6.145.1.1.2.13.1.5ColumnhwXponOntPortEthernetStatisticRecvPkts64Octetsread-onlycurrentThis object indicates the received 64-octet frames
1.3.6.1.4.1.2011.6.145.1.1.2.13.1.6ColumnhwXponOntPortEthernetStatisticRecvPkts65to127Octetsread-onlycurrentThis object indicates the received 65~127-octet frames
1.3.6.1.4.1.2011.6.145.1.1.2.13.1.7ColumnhwXponOntPortEthernetStatisticRecvPkts128to255Octetsread-onlycurrentThis object indicates the received 128~255-octet frames
1.3.6.1.4.1.2011.6.145.1.1.2.13.1.8ColumnhwXponOntPortEthernetStatisticRecvPkts256to511Octetsread-onlycurrentThis object indicates the received 256~511-octet frames.
1.3.6.1.4.1.2011.6.145.1.1.2.13.1.9ColumnhwXponOntPortEthernetStatisticRecvPkts512to1023Octetsread-onlycurrentThis object indicates the received 512~1023-octet frames.
1.3.6.1.4.1.2011.6.145.1.1.2.13.1.10ColumnhwXponOntPortEthernetStatisticRecvPkts1024to1518Octetsread-onlycurrentThis object indicates the received 1024~1518-octet frames.
1.3.6.1.4.1.2011.6.145.1.1.2.13.1.11ColumnhwXponOntPortEthernetStatisticRecvPktsOversizeread-onlycurrentThis object indicates the received oversize frames.
1.3.6.1.4.1.2011.6.145.1.1.2.13.1.12ColumnhwXponOntPortEthernetStatisticRecvPktsUndersizeread-onlycurrentThis object indicates the received undersize frames.
1.3.6.1.4.1.2011.6.145.1.1.2.13.1.13ColumnhwXponOntPortEthernetStatisticRecvFCSErrorsread-onlycurrentThis object indicates the received FCS error frames.
1.3.6.1.4.1.2011.6.145.1.1.2.13.1.14ColumnhwXponOntPortEthernetStatisticRecvDropEventsread-onlycurrentThis object indicates the received drop events.
1.3.6.1.4.1.2011.6.145.1.1.2.13.1.15ColumnhwXponOntPortEthernetStatisticSendOctetsread-onlycurrentThis object indicates the send drop bytes.
1.3.6.1.4.1.2011.6.145.1.1.2.13.1.16ColumnhwXponOntPortEthernetStatisticSendPktsread-onlycurrentThis object indicates the send frames.
1.3.6.1.4.1.2011.6.145.1.1.2.13.1.17ColumnhwXponOntPortEthernetStatisticSendBroadcastPktsread-onlycurrentThis object indicates the sent broadcast frames.
1.3.6.1.4.1.2011.6.145.1.1.2.13.1.18ColumnhwXponOntPortEthernetStatisticSendMulticastPktsread-onlycurrentThis object indicates the sent multicast frames.
1.3.6.1.4.1.2011.6.145.1.1.2.13.1.19ColumnhwXponOntPortEthernetStatisticSendPkts64Octetsread-onlycurrentThis object indicates the sent 64-octet frames.
1.3.6.1.4.1.2011.6.145.1.1.2.13.1.20ColumnhwXponOntPortEthernetStatisticSendPkts65to127Octetsread-onlycurrentThis object indicates the sent 65~127-octet frames.
1.3.6.1.4.1.2011.6.145.1.1.2.13.1.21ColumnhwXponOntPortEthernetStatisticSendPkts128to255Octetsread-onlycurrentThis object indicates the sent 128~255-octet frames.
1.3.6.1.4.1.2011.6.145.1.1.2.13.1.22ColumnhwXponOntPortEthernetStatisticSendPkts256to511Octetsread-onlycurrentThis object indicates the sent 256~511-octet frames.
1.3.6.1.4.1.2011.6.145.1.1.2.13.1.23ColumnhwXponOntPortEthernetStatisticSendPkts512to1023Octetsread-onlycurrentThis object indicates the sent 512~1023-octet frames.
1.3.6.1.4.1.2011.6.145.1.1.2.13.1.24ColumnhwXponOntPortEthernetStatisticSendPkts1024to1518Octetsread-onlycurrentThis object indicates the sent 1024~1518-octet frames.
1.3.6.1.4.1.2011.6.145.1.1.2.13.1.25ColumnhwXponOntPortEthernetStatisticSendPktsOversizeread-onlycurrentThis object indicates the sent oversize frames.
1.3.6.1.4.1.2011.6.145.1.1.2.13.1.26ColumnhwXponOntPortEthernetStatisticForwardDropEventsread-onlycurrentThis object indicates the sent drop events.
1.3.6.1.4.1.2011.6.145.1.1.2.13.1.27ColumnhwXponOntPortEthernetStatisticClearread-writecurrentThis object is used to clear the statistics. Options: 1. clear(1) - Indicates that clear the statistics 2. invalid(-1) - Indicates that the query fails or no i…
1.3.6.1.4.1.2011.6.145.1.1.2.14TablehwXponOntPowerReductionStatisticTablenot-accessiblecurrentThis table is used to query the information about the ONT power reduction statistics. It is only used for defining GPON management common MIB objects for both …
1.3.6.1.4.1.2011.6.145.1.1.2.14.1RowhwXponOntPowerReductionStatisticEntrynot-accessiblecurrentThis table is used to query the information about the ONT power reduction statistics. It is only used for defining GPON management common MIB objects for both …
1.3.6.1.4.1.2011.6.145.1.1.2.14.1.1ColumnhwXponOntPowerReductionDozeTimeread-onlycurrentThis object indicates the total doze time of power reduction ONT since its statistics have been cleared last time. It is defined as an 64-bit integer whose uni…
1.3.6.1.4.1.2011.6.145.1.1.2.14.1.2ColumnhwXponOntPowerReductionCyclicSleepTimeread-onlycurrentThis object indicates the total cyclic sleep time of power reduction ONT since its statistics have been cleared last time. It is defined as an 64-bit integer w…
1.3.6.1.4.1.2011.6.145.1.1.2.14.1.3ColumnhwXponOntPowerReductionWatchfulSleepTimeread-onlycurrentThis object indicates the total watchful sleep time of power reduction ONT since its statistics have been cleared last time. It is defined as an 64-bit integer…
1.3.6.1.4.1.2011.6.145.1.1.2.14.1.4ColumnhwXponOntPowerReductionEnergySavedread-onlycurrentThis object indicates the total energy saved for power reduction ONT since its statistics have been cleared last time. It is defined as an 64-bit integer whose…
1.3.6.1.4.1.2011.6.145.1.1.2.14.1.5ColumnhwXponOntPowerReductionCountClearread-writecurrentThis object is used to clear the statistics. Options: 1. clear(1) - Indicates that clear the power reduction statistics 2. invalid(-1) - Indicates that the que…
1.3.6.1.4.1.2011.6.145.1.1.2.15TablehwGponPortTrafficStatisticTablenot-accessiblecurrentThis table is used to query the information about the traffic congestion statistics. The indexes of this table are ifIndex and hwGponPortTrafficStatisticIndex.
1.3.6.1.4.1.2011.6.145.1.1.2.15.1RowhwGponPortTrafficStatisticEntrynot-accessiblecurrentThis table is used to query the information about the traffic congestion statistics. The indexes of this entry are ifIndex and hwGponPortTrafficStatisticIndex.
1.3.6.1.4.1.2011.6.145.1.1.2.15.1.1ColumnhwGponPortTrafficStatisticIndexnot-accessiblecurrentIndex of the traffic congestion statistics. Range: 0-1. Value 0 query current period traffic congestion statistics Value 1 query last period traffic congestion…
1.3.6.1.4.1.2011.6.145.1.1.2.15.1.2ColumnhwGponPortTrafficStatisticUpstreamRateread-onlycurrentThis object indicates the received average rate of this port. It is defined as an 32-bit integer whose unit is 'kbps'.
1.3.6.1.4.1.2011.6.145.1.1.2.15.1.3ColumnhwGponPortTrafficStatisticDownstreamRateread-onlycurrentThis object indicates the transmitted average rate of this port. It is defined as an 32-bit integer whose unit is 'kbps'.
1.3.6.1.4.1.2011.6.145.1.1.2.15.1.4ColumnhwGponPortTrafficStatisticUpstreamCongestionTimesread-onlycurrentThis object indicates the Upstream congestion period number.
1.3.6.1.4.1.2011.6.145.1.1.2.15.1.5ColumnhwGponPortTrafficStatisticDownstreamCongestionTimesread-onlycurrentThis object indicates the Downstream congestion period number.
1.3.6.1.4.1.2011.6.145.1.1.2.16TablehwGponComboOltEthernetStatisticTablenot-accessiblecurrentThis table is the Combo PON port ether statistics table. The indexes of this table are ifIndex and hwGponComboOltEthernetStatisticChannelID.
1.3.6.1.4.1.2011.6.145.1.1.2.16.1RowhwGponComboOltEthernetStatisticEntrynot-accessiblecurrentThis table is the Combo PON port ether statistics table. The indexes of this entry are ifIndex and hwGponComboOltEthernetStatisticChannelID.
1.3.6.1.4.1.2011.6.145.1.1.2.16.1.1ColumnhwGponComboOltEthernetStatisticChannelIDnot-accessiblecurrentThis object indicates the channel of the Combo PON port. Options: 1. gpon(1) - Indicates that the channel of the Combo PON port is GPON. 2. xgpon(2) - Indicate…
1.3.6.1.4.1.2011.6.145.1.1.2.16.1.2ColumnhwGponComboOltEthernetStatisticReceivedPaktsread-onlycurrentThis object indicates the received frames.
1.3.6.1.4.1.2011.6.145.1.1.2.16.1.3ColumnhwGponComboOltEthernetStatisticSendPaktsread-onlycurrentThis object indicates the sent frames.
1.3.6.1.4.1.2011.6.145.1.1.2.16.1.4ColumnhwGponComboOltEthernetStatisticDropPaktsread-onlycurrentThis object indicates the number of Ethernet frames, including oversized frames, undersized frames, and CRC failures.
1.3.6.1.4.1.2011.6.145.1.1.2.16.1.5ColumnhwGponComboOltEthernetStatisticReceivedTotalPaktsread-onlycurrentThis object indicates the received GEM frames.
1.3.6.1.4.1.2011.6.145.1.1.2.16.1.6ColumnhwGponComboOltEthernetStatisticReceivedBroadcastPaktsread-onlycurrentThis object indicates the received broadcast frames.
1.3.6.1.4.1.2011.6.145.1.1.2.16.1.7ColumnhwGponComboOltEthernetStatisticReceivedMulticastPaktsread-onlycurrentThis object indicates the received multicast frames.
1.3.6.1.4.1.2011.6.145.1.1.2.16.1.8ColumnhwGponComboOltEthernetStatisticReceivedUnicastPaktsread-onlycurrentThis object indicates the received unicast frames.
1.3.6.1.4.1.2011.6.145.1.1.2.16.1.9ColumnhwGponComboOltEthernetStatisticReceivedLen64Bytesread-onlycurrentThis object indicates the received 64-octet frames.
1.3.6.1.4.1.2011.6.145.1.1.2.16.1.10ColumnhwGponComboOltEthernetStatisticReceivedLen65To127Bytesread-onlycurrentThis object indicates the received 65~127-octet frames.
1.3.6.1.4.1.2011.6.145.1.1.2.16.1.11ColumnhwGponComboOltEthernetStatisticReceivedLen128To255Bytesread-onlycurrentThis object indicates the received 128~255-octet frames.
1.3.6.1.4.1.2011.6.145.1.1.2.16.1.12ColumnhwGponComboOltEthernetStatisticReceivedLen256To511Bytesread-onlycurrentThis object indicates the received 256~511-octet frames.
1.3.6.1.4.1.2011.6.145.1.1.2.16.1.13ColumnhwGponComboOltEthernetStatisticReceivedLen512To1023Bytesread-onlycurrentThis object indicates the received 512~1023-octet frames.
1.3.6.1.4.1.2011.6.145.1.1.2.16.1.14ColumnhwGponComboOltEthernetStatisticReceivedLen1024To1518Bytesread-onlycurrentThis object indicates the received 1024~1518-octet frames.
1.3.6.1.4.1.2011.6.145.1.1.2.16.1.15ColumnhwGponComboOltEthernetStatisticReceivedLenMore1518Bytesread-onlycurrentThis object indicates the received over 1518-octet frames.
1.3.6.1.4.1.2011.6.145.1.1.2.16.1.16ColumnhwGponComboOltEthernetStatisticReceivedBytesread-onlycurrentThis object indicates the received octets.
1.3.6.1.4.1.2011.6.145.1.1.2.16.1.17ColumnhwGponComboOltEthernetStatisticReceivedTooLongPaktsread-onlycurrentThis object indicates the received oversize frames.
1.3.6.1.4.1.2011.6.145.1.1.2.16.1.18ColumnhwGponComboOltEthernetStatisticReceivedTooShortPaktsread-onlycurrentThis object indicates the received undersize frames.
1.3.6.1.4.1.2011.6.145.1.1.2.16.1.19ColumnhwGponComboOltEthernetStatisticReceivedCRCErrPaktsread-onlycurrentThis object indicates the received error frames.
1.3.6.1.4.1.2011.6.145.1.1.2.16.1.20ColumnhwGponComboOltEthernetStatisticSendTotalPaktsread-onlycurrentThis object indicates the send GEM frames.
1.3.6.1.4.1.2011.6.145.1.1.2.16.1.21ColumnhwGponComboOltEthernetStatisticSendBroadcastPaktsread-onlycurrentThis object indicates the send broadcast frames.
1.3.6.1.4.1.2011.6.145.1.1.2.16.1.22ColumnhwGponComboOltEthernetStatisticSendMulticastPaktsread-onlycurrentThis object indicates the send multicast frames.
1.3.6.1.4.1.2011.6.145.1.1.2.16.1.23ColumnhwGponComboOltEthernetStatisticSendUnicastPaktsread-onlycurrentThis object indicates the send unicast frames.
1.3.6.1.4.1.2011.6.145.1.1.2.16.1.24ColumnhwGponComboOltEthernetStatisticSendLen64Bytesread-onlycurrentThis object indicates the sent 64-octet frames.
1.3.6.1.4.1.2011.6.145.1.1.2.16.1.25ColumnhwGponComboOltEthernetStatisticSendLen65To127Bytesread-onlycurrentThis object indicates the sent 65~127-octet frames.
1.3.6.1.4.1.2011.6.145.1.1.2.16.1.26ColumnhwGponComboOltEthernetStatisticSendLen128To255Bytesread-onlycurrentThis object indicates the sent 128~255-octet frames.
1.3.6.1.4.1.2011.6.145.1.1.2.16.1.27ColumnhwGponComboOltEthernetStatisticSendLen256To511Bytesread-onlycurrentThis object indicates the sent 256~511-octet frames.
1.3.6.1.4.1.2011.6.145.1.1.2.16.1.28ColumnhwGponComboOltEthernetStatisticSendLen512To1023Bytesread-onlycurrentThis object indicates the sent 512~1023-octet frames.
1.3.6.1.4.1.2011.6.145.1.1.2.16.1.29ColumnhwGponComboOltEthernetStatisticSendLen1024To1518Bytesread-onlycurrentThis object indicates the sent 1024~1518-octet frames.
1.3.6.1.4.1.2011.6.145.1.1.2.16.1.30ColumnhwGponComboOltEthernetStatisticSendLenMore1518Bytesread-onlycurrentThis object indicates the sent over 1518-octet frames.
1.3.6.1.4.1.2011.6.145.1.1.2.16.1.31ColumnhwGponComboOltEthernetStatisticSendBytesread-onlycurrentThis object indicates the sent octets.
1.3.6.1.4.1.2011.6.145.1.1.2.16.1.32ColumnhwGponComboOltEthernetStatisticSendMulticastBytesread-onlycurrentThis object indicates the sent multicast bytes.
1.3.6.1.4.1.2011.6.145.1.1.2.17TablehwGponComboOltGemStatisticTablenot-accessiblecurrentThis table is the Combo PON port GEM frame statistics table. The indexes of this table are ifIndex and hwGponComboOltGemStatisticChannelID.
1.3.6.1.4.1.2011.6.145.1.1.2.17.1RowhwGponComboOltGemStatisticEntrynot-accessiblecurrentThis table is the Combo PON port GEM frame statistics table. The indexes of this entry are ifIndex and hwGponComboOltGemStatisticChannelID.
1.3.6.1.4.1.2011.6.145.1.1.2.17.1.1ColumnhwGponComboOltGemStatisticChannelIDnot-accessiblecurrentThis object indicates the channel of the Combo PON port. Options: 1. gpon(1) - Indicates that the channel of the Combo PON port is GPON. 2. xgpon(2) - Indicate…
1.3.6.1.4.1.2011.6.145.1.1.2.17.1.2ColumnhwGponComboOltGemStatisticReceivedFramesread-onlycurrentThis object indicates the received GEM frames.
1.3.6.1.4.1.2011.6.145.1.1.2.17.1.3ColumnhwGponComboOltGemStatisticReceivedOMCIPacktsread-onlycurrentThis object indicates the recived OMCI frames.
1.3.6.1.4.1.2011.6.145.1.1.2.17.1.4ColumnhwGponComboOltGemStatisticReceivedPLOAMPacktsread-onlycurrentThis object indicates the recived PLOAM frames.
1.3.6.1.4.1.2011.6.145.1.1.2.17.1.5ColumnhwGponComboOltGemStatisticReceivedIdlePacktsread-onlycurrentThis object indicates the recived IDLE frames.
1.3.6.1.4.1.2011.6.145.1.1.2.17.1.6ColumnhwGponComboOltGemStatisticSendFramesread-onlycurrentThis object indicates the sent GEM frames.
1.3.6.1.4.1.2011.6.145.1.1.2.17.1.7ColumnhwGponComboOltGemStatisticSendOMCIPacktsread-onlycurrentThis object indicates the sent OMCI frames.
1.3.6.1.4.1.2011.6.145.1.1.2.17.1.8ColumnhwGponComboOltGemStatisticSendPLOAMPacktsread-onlycurrentThis object indicates the sent PLOAM frames.
1.3.6.1.4.1.2011.6.145.1.1.2.17.1.9ColumnhwGponComboOltGemStatisticSendIdlePacktsread-onlycurrentThis object indicates the sent IDLE frames.
1.3.6.1.4.1.2011.6.145.1.1.2.18TablehwOltGponComboPortInfoTablenot-accessiblecurrentThe Combo PON port information table. The index of this table is ifIndex and hwOltGponComboPortChannelID.
1.3.6.1.4.1.2011.6.145.1.1.2.18.1RowhwOltGponComboPortInfoEntrynot-accessiblecurrentThe Combo PON port information table. The index of this entry is ifIndex and hwOltGponComboPortChannelID.
1.3.6.1.4.1.2011.6.145.1.1.2.18.1.1ColumnhwOltGponComboPortChannelIDnot-accessiblecurrentThis object indicates the channel of the Combo PON port. Options: 1. gpon(1) - Indicates that the channel of the Combo PON port is GPON. 2. xgpon(2) - Indicate…
1.3.6.1.4.1.2011.6.145.1.1.2.18.1.2ColumnhwOltGponComboPortOpticModuleStatusread-onlycurrentThis object indicates the status of the Combo PON port optical module. Options: 1. online(1) - Indicates that the status of the Combo PON port optical module i…
1.3.6.1.4.1.2011.6.145.1.1.2.19TablehwXponOntRegAndAuthStatTablenot-accessiblecurrentThis table is indicates the ONT registration and authentication statistics. The indexes of this table are ifIndex and hwXponOntIndex.
1.3.6.1.4.1.2011.6.145.1.1.2.19.1RowhwXponOntRegAndAuthStatEntrynot-accessiblecurrentThis table is indicates the ONT registration and authentication statistics. The indexes of this entry are ifIndex and hwXponOntIndex.
1.3.6.1.4.1.2011.6.145.1.1.2.19.1.1ColumnhwXponOntRegAndAuthStatRegisterAcceptedCounterread-onlycurrentThis object indicates the registration accepted counter. -1 indicates the invalid value.
1.3.6.1.4.1.2011.6.145.1.1.2.19.1.2ColumnhwXponOntRegAndAuthStatRegisterRejectedCounterread-onlycurrentThis object indicates the registration rejected counter. -1 indicates the invalid value.
1.3.6.1.4.1.2011.6.145.1.1.2.19.1.3ColumnhwXponOntRegAndAuthStatAuthAcceptedCounterread-onlycurrentThis object indicates the authentification accepted counter. -1 indicates the invalid value.
1.3.6.1.4.1.2011.6.145.1.1.2.19.1.4ColumnhwXponOntRegAndAuthStatAuthRejectedCounterread-onlycurrentThis object indicates the authentification rejected counter. -1 indicates the invalid value.
1.3.6.1.4.1.2011.6.145.1.1.2.19.1.5ColumnhwXponOntRegAndAuthStatChallengedCounterread-onlycurrentThis object indicates the authentification challenged counter. -1 indicates the invalid value.
1.3.6.1.4.1.2011.6.145.1.1.3NodehwGponDeviceCommonGlobalObjects
1.3.6.1.4.1.2011.6.145.1.1.3.1ScalarhwGponDeviceChangePasswordIntervalTimeread-writecurrentThe interval time of ONT's password renew, 0 means no update, 65535 means no configration data. Unit: minutes
1.3.6.1.4.1.2011.6.145.1.1.3.2ScalarhwGponDeviceTcontAutoCombineSwitchread-writecurrentThe switch value of T-CONT auto-combine. Options: 1. enable(1) - The switch value of T-CONT auto-combine is enable 2. disable(2) - The switch value of T-CONT a…
1.3.6.1.4.1.2011.6.145.1.1.3.3ScalarhwGponOntInteroperabilityModeread-writecurrentThe switch mode of gpon ont interoperability. Options: 1. ituT(1) - The switch mode of gpon ont interoperability is ituT 2. ctc(2) - The switch mode of gpon on…
1.3.6.1.4.1.2011.6.145.1.1.3.4ScalarhwGponDeviceOntDefaultLineProfNameread-onlycurrentThis object indicates the name of the default line profile that is bound to the ONT.
1.3.6.1.4.1.2011.6.145.1.1.3.5ScalarhwGponDeviceOntDefaultSrvProfNameread-onlycurrentThis object indicates the name of the default service profile that is bound to the ONT.
1.3.6.1.4.1.2011.6.145.1.1.3.6ScalarhwGponOntMutlicastAuthModeread-writecurrentThe mode of gpon ont multicast authentication. Options: 1. ontControl(1) - The mode of gpon multicast authentication is ont-control 2. oltControl(2) - The mode…
1.3.6.1.4.1.2011.6.145.1.1.3.7ScalarhwGponOnuTcontPriorityQueuePriorityReverseread-writecurrentThe priority reverse switch of gpon ont priority queue. Options: 1. enable(1) - The priority reverse switch is enable 2. disable(2) - The priority reverse swit…
1.3.6.1.4.1.2011.6.145.1.1.3.8ScalarhwGponOntInteroperModeActiveModeread-writecurrentThe active mode of gpon ONT interoperability mode. Options: 1. immediate(1) - Indicates that the ONT takes effect immediately 2. nextStartup(2) - Indicates tha…
1.3.6.1.4.1.2011.6.145.1.1.3.9ScalarhwGponDeviceTcontAutoCreateSwitchread-writecurrentThe switch value of T-CONT auto-create. Options: 1. enable(1) - The switch value of T-CONT auto-create is enable 2. disable(2) - The switch value of T-CONT aut…
1.3.6.1.4.1.2011.6.145.1.1.3.10ScalarhwGponOntPriorityQueueMappingPolicySwitchread-writecurrentThe switch value of GPON ONT priority queue mapping policy. Options: 1. gemMap(1) - GPON ONT priority queue mapping policy is gemMap 2. cosMap(2) - GPON ONT pr…
1.3.6.1.4.1.2011.6.145.1.1.3.11ScalarhwGponDeviceXgMulticastGemportIdread-writecurrentThe GEM port ID for XG-PON multicast service, ranging from 65439 to 65534. The default value is 65534.
1.3.6.1.4.1.2011.6.145.1.1.3.12ScalarhwGponOntWanConfigModeread-writecurrentThe mode of gpon ont wan config mode. Options: 1. setAfterCreate(1) - The mode of gpon wan config mode is set-after-create 2. setByCreate(2) - The mode of gpon…
1.3.6.1.4.1.2011.6.145.1.1.3.13ScalarhwGponDeviceAntiDosPloamSwitchread-writecurrentThe switch value of anti-dos PLOAM. Options: 1. enable(1) - The switch value of anti-dos PLOAM is enable 2. disable(2) - The switch value of anti-dos PLOAM is …
1.3.6.1.4.1.2011.6.145.1.1.3.14ScalarhwGponOntHomeGatewayConfigMethodread-writecurrentThe config method of home gateway. Options: 1. xml(1) - The config method of home gateway is xml. 2. omci(2) - The config method of home gateway is omci.
1.3.6.1.4.1.2011.6.145.1.1.3.15ScalarhwGponDeviceSnOutPutFormatPolicyread-writecurrentThe output format of SN. Options: 1. default(1) - The output format of SN is default 2. vendorPrefix(2) - The output format of SN is vendor-prefix The default …
1.3.6.1.4.1.2011.6.145.1.1.3.16ScalarhwGponDeviceOmciBandwidthCompensateSwitchread-writecurrentThe switch value of omci bandwidth compensate. Options: 1. enable(1) - The switch value of omci bandwidth compensate is enable 2. disable(2) - The switch value…
1.3.6.1.4.1.2011.6.145.1.1.3.17ScalarhwGponOntVlanTagOperModeread-writecurrentThe mode of gpon ont vlan tag operation mode. Options: 1. modifyExternalTag(1) - The mode of gpon vlan tag operation mode is modify-external-tag 2. modifySingl…
1.3.6.1.4.1.2011.6.145.1.1.3.18ScalarhwGponOntAniMVlanFilterread-writecurrentIndicates the mode of multicast VLAN filtering on the GPON ONT ANI side. Options: 1. default(0) -Indicates the default system behavior. 2. enable(1) -Creates t…
1.3.6.1.4.1.2011.6.145.1.1.3.19ScalarhwGponOntQueueMapQueue0IDread-writecurrentConfigures the rule of mapping the GPON ONT virtual queue to actual queue. Note the leaves hwGponOntQueueMapQueue0ID to hwGponOntQueueMapQueue7ID must be confi…
1.3.6.1.4.1.2011.6.145.1.1.3.20ScalarhwGponOntQueueMapQueue1IDread-writecurrentConfigures the rule of mapping the GPON ONT virtual queue to actual queue. Note the leaves hwGponOntQueueMapQueue0ID to hwGponOntQueueMapQueue7ID must be confi…
1.3.6.1.4.1.2011.6.145.1.1.3.21ScalarhwGponOntQueueMapQueue2IDread-writecurrentConfigures the rule of mapping the GPON ONT virtual queue to actual queue. Note the leaves hwGponOntQueueMapQueue0ID to hwGponOntQueueMapQueue7ID must be confi…
1.3.6.1.4.1.2011.6.145.1.1.3.22ScalarhwGponOntQueueMapQueue3IDread-writecurrentConfigures the rule of mapping the GPON ONT virtual queue to actual queue. Note the leaves hwGponOntQueueMapQueue0ID to hwGponOntQueueMapQueue7ID must be confi…
1.3.6.1.4.1.2011.6.145.1.1.3.23ScalarhwGponOntQueueMapQueue4IDread-writecurrentConfigures the rule of mapping the GPON ONT virtual queue to actual queue. Note the leaves hwGponOntQueueMapQueue0ID to hwGponOntQueueMapQueue7ID must be confi…
1.3.6.1.4.1.2011.6.145.1.1.3.24ScalarhwGponOntQueueMapQueue5IDread-writecurrentConfigures the rule of mapping the GPON ONT virtual queue to actual queue. Note the leaves hwGponOntQueueMapQueue0ID to hwGponOntQueueMapQueue7ID must be confi…
1.3.6.1.4.1.2011.6.145.1.1.3.25ScalarhwGponOntQueueMapQueue6IDread-writecurrentConfigures the rule of mapping the GPON ONT virtual queue to actual queue. Note the leaves hwGponOntQueueMapQueue0ID to hwGponOntQueueMapQueue7ID must be confi…
1.3.6.1.4.1.2011.6.145.1.1.3.26ScalarhwGponOntQueueMapQueue7IDread-writecurrentConfigures the rule of mapping the GPON ONT virtual queue to actual queue. Note the leaves hwGponOntQueueMapQueue0ID to hwGponOntQueueMapQueue7ID must be confi…
1.3.6.1.4.1.2011.6.145.1.1.4NodehwXponDeviceCommonGlobalObjects
1.3.6.1.4.1.2011.6.145.1.1.4.1ScalarhwXponDeviceLosAlarmControlStateread-writecurrentThe object is used to open or close the switch of the advanced los alarm. Options: 1.enable(1) - Open the switch of the advanced los alarm 2.disable(2) - Close…
1.3.6.1.4.1.2011.6.145.1.1.4.2ScalarhwXponCommonOntCatvDefaultStateread-writecurrentThis object is used to set the default status of ONT CATV ports. Options: 1. on(1) - The default status of ONT CATV ports is on 2. off(2) - The default status …
1.3.6.1.4.1.2011.6.145.1.1.4.3ScalarhwXponDeviceGroupPowerOffControlStateread-writecurrentThis object is used to open or close the group power off report switch. Options: 1.enable(1) - Open the group power off report switch 2.disable(2) - Close the …
1.3.6.1.4.1.2011.6.145.1.1.4.4ScalarhwXponDeviceAutofindConflictCheckSwitchread-writecurrentThis object is used to open or close the ONT autofind conflict-check switch. Options: 1.enable(1) - Open the switch of the ONT autofind conflict-check 2.disabl…
1.3.6.1.4.1.2011.6.145.1.1.4.5ScalarhwXponDeviceModifyBoundProfileSwitchread-writecurrentThis object is used to enable or disable the bound profile modification switch. Options: 1.enable(1) - Enable to modify bound profile 2.disable(2) - Disable to…
1.3.6.1.4.1.2011.6.145.1.1.4.6ScalarhwXponDeviceAlarmClearOnShutdownread-writecurrentThe object is used to set whether clear active alarm on shutdown object. Options: 1.enable(1) - Open the switch, clear active alarm on shutdown object 2.disabl…
1.3.6.1.4.1.2011.6.145.1.1.4.7ScalarhwXponDeviceSuppressInitialAlarmStateread-writecurrentThe object is used to set whether suppress initial alarm. Options: 1.enable(1) - Open the switch, suppress initial alarm state 2.disable(2) - Close the switch,…
1.3.6.1.4.1.2011.6.145.1.1.4.8ScalarhwXponDeviceAllowDifferentRangeSwitchread-writecurrentThis object is used to enable or disable the switch of allowing protect group member ports have different distances. Options: 1.enable(1) - Enable the switch o…
1.3.6.1.4.1.2011.6.145.1.1.4.9ScalarhwXponOntInteroperabilityFileVersionread-onlycurrentThis object is used to query the version of the ont interoperability file. The value of this node: Year(2byte) : 65535-invalid Month(1byte) : 255-invalid Day(1…
1.3.6.1.4.1.2011.6.145.1.1.4.10ScalarhwXponDeviceOperatorCheckSwitchread-writecurrentThe object is used to set operator check switch. Options: 1.enable(1) - Open the switch 2.disable(2) - Close the switch The default value is disable(2).
1.3.6.1.4.1.2011.6.145.1.1.4.11ScalarhwXponDeviceOperatorCheckCoderead-writecurrentThe object is used to set operator check code.
1.3.6.1.4.1.2011.6.145.1.1.4.12ScalarhwXponDeviceOperatorCheckHistoryCodeMaxNumberread-writecurrentThe object is used to set max number of operator check history code. range: 0-11.
1.3.6.1.4.1.2011.6.145.1.1.4.13ScalarhwXponDeviceOperatorCheckHistoryCodeClearread-writecurrentThe object is used to clear operator check history code.
1.3.6.1.4.1.2011.6.145.1.1.4.14ScalarhwXponCommonDeviceOntPowerReductionSwitchread-writecurrentThis object is used to open or close the ONT global switch. Options: 1.enable(1) - Open the switch of the ONT power reduction. 2.disable(2) - Close the switch …
1.3.6.1.4.1.2011.6.145.1.1.4.15ScalarhwXponDeviceAntiWeakLightRogueSwitchread-writecurrentThis object is used to enable or disable the function of anti-rogue ONTs that transmit weak optical signals. Options: 1.enable(1) - Enable the function of anti…
1.3.6.1.4.1.2011.6.145.1.1.4.16ScalarhwXponDeviceOntUserMulticastProcessread-writecurrentThis object indicates the processing mode of the ONT user-side multicast packet. Options: 1.forward(1) - Indicates the forward processing mode. 2.discard(2) - …
1.3.6.1.4.1.2011.6.145.1.1.4.17ScalarhwXponDevicePortFaultCheckSwitchread-writecurrentThis object indicates the switch value of PON fault check. Options: 1.enable(1) - The switch value of PON fault check is enable. 2.disable(2) - The switch valu…
1.3.6.1.4.1.2011.6.145.1.1.4.18ScalarhwXponDeviceRogueOntSelfDetectSwitchread-writecurrentThis object indicates the self-detected switch of rogue ONTs. Options: 1.enable(1) - The self-detected switch of rogue ONTs is enable. 2.disable(2) - The self-…
1.3.6.1.4.1.2011.6.145.1.1.4.19ScalarhwXponDeviceOntOfflineMonitorSwitchread-writecurrentThis object indicates the switch value of ONTs offline monitoring. Options: 1.enable(1) - The switch of ONTs offline monitoring is enable. 2.disable(2) - The s…
1.3.6.1.4.1.2011.6.145.1.1.4.20ScalarhwXponDeviceOntOfflineMonitorAlarmThresholdRatioread-writecurrentThis object indicates the ratio of ONTS offline monitoring alarm generation threshold. The restoration threshold must be higher than the generation threshold. …
1.3.6.1.4.1.2011.6.145.1.1.4.21ScalarhwXponDeviceOntOfflineMonitorRestoreThresholdRatioread-writecurrentThis object indicates the ratio of ONTS offline monitoring alarm restoration threshold. The restoration threshold must be higher than the generation threshold.…
1.3.6.1.4.1.2011.6.145.1.1.4.22ScalarhwXponDeviceTypeBLosAlarmControlStateread-writecurrentThe object is used to open or close the switch of the los alarm for the standby port in the Type B protect group. Options: 1.enable(1) - Open the switch of the…
1.3.6.1.4.1.2011.6.145.1.1.4.23ScalarhwXponDeviceOltOpticalAlarmAutoMonitorSwitchread-writecurrentThe object is used to configure automatic monitoring on OLT optical alarm, the function will be disabled when the PON port is bound to optical alarm profile. O…
1.3.6.1.4.1.2011.6.145.1.1.4.24ScalarhwXponDeviceOntOpticalAlarmAutoMonitorSwitchread-writecurrentThe object is used to configure automatic monitoring on ONT optical alarm, the function will be disabled when the ONT is bound to optical alarm profile. Option…
1.3.6.1.4.1.2011.6.145.1.1.4.25ScalarhwXponDeviceVsOntIdAllocPolicyread-writecurrentThis object indicates the ONT ID alloc policy of virtual system. Options: 1.global(1) - The ONT ID alloc policy is global. 2.independent(2) - The ONT ID alloc …
1.3.6.1.4.1.2011.6.145.1.1.4.26ScalarhwXponDeviceOntLowBandwidthUsageMonitorSwitchread-writecurrentThis object is used to enable or disable monitoring on ONT abnormal bandwidth request. Options: 1.enable(1) - Enable monitoring on ONT abnormal bandwidth reque…
1.3.6.1.4.1.2011.6.145.1.1.5NodehwXponDeviceCommonProfileObjects
1.3.6.1.4.1.2011.6.145.1.1.5.1TablehwXponOntAlarmPolicyTablenot-accessiblecurrentThe hwXponOntAlarmPolicyTable is used to config the ONT alarm policy profile. The index of this table is hwXponOntAlarmPolicyNameIndex.
1.3.6.1.4.1.2011.6.145.1.1.5.1.1RowhwXponOntAlarmPolicyEntrynot-accessiblecurrentThe hwXponOntAlarmPolicyTable is used to config the ONT alarm policy profile. The index of this entry is hwXponOntAlarmPolicyNameIndex.
1.3.6.1.4.1.2011.6.145.1.1.5.1.1.1ColumnhwXponOntAlarmPolicyNameIndexnot-accessiblecurrentThis object indicates the ONT alarm policy profile name index.
1.3.6.1.4.1.2011.6.145.1.1.5.1.1.2ColumnhwXponOntAlarmPolicyBindNumread-onlycurrentThis object indicates the number of ONT bound with alarm policy profile.
1.3.6.1.4.1.2011.6.145.1.1.5.1.1.3ColumnhwXponOntAlarmPolicyFilterAlarmNumread-writecurrentThis object indicates the number of filtered alarm of the alarm policy profile.
1.3.6.1.4.1.2011.6.145.1.1.5.1.1.4ColumnhwXponOntAlarmPolicyFilterAlarmListread-writecurrentThis object indicates the filtered alarm list of the alarm policy profile,and each alarm ID takes 4 bytes.
1.3.6.1.4.1.2011.6.145.1.1.5.1.1.5ColumnhwXponOntAlarmPolicyUnFilterAlarmNumread-writecurrentThis object indicates the number of unfiltered alarm of the alarm policy profile.
1.3.6.1.4.1.2011.6.145.1.1.5.1.1.6ColumnhwXponOntAlarmPolicyUnFilterAlarmListread-writecurrentThis object indicates the unfiltered alarm list of the alarm policy profile,and each alarm ID takes 4 bytes.
1.3.6.1.4.1.2011.6.145.1.1.5.1.1.7ColumnhwXponOntAlarmPolicyRowStatusread-createcurrentThe hwXponOntAlarmPolicyRowStatus is used to create a new row or to modify or delete an existing row in this table. Options: 1. createAndGo(4) -create a new in…
1.3.6.1.4.1.2011.6.145.1.1.5.1.1.8ColumnhwXponOntAlarmPolicyAppendPolicyNameread-writecurrentThis object indicates if the ONT alarm appends ONT alarm policy profile name. Options: 1.enable(1) - The ONT alarm appends ONT alarm policy profile name.. 2.di…
1.3.6.1.4.1.2011.6.145.1.1.5.1.1.9ColumnhwXponOntAlarmPolicyAppendIpAddressread-writecurrentThis object indicates if the ONT alarm appends IP address. Options: 1.enable(1) - The ONT alarm appends IP address. 2.disable(2) - The ONT alarm does not appen…
1.3.6.1.4.1.2011.6.145.1.1.5.1.1.10ColumnhwXponOntAlarmPolicyAppendMacread-writecurrentThis object indicates if the ONT alarm appends MAC. Options: 1.enable(1) - The ONT alarm appends MAC. 2.disable(2) - The ONT alarm does not append MAC. The def…
1.3.6.1.4.1.2011.6.145.1.1.5.1.1.11ColumnhwXponOntAlarmPolicyAppendSnread-writecurrentThis object indicates if the ONT alarm appends SN. Options: 1.enable(1) - The ONT alarm appends SN. 2.disable(2) - The ONT alarm does not append SN. The defaul…
1.3.6.1.4.1.2011.6.145.1.1.5.1.1.12ColumnhwXponOntAlarmPolicyAppendLoidread-writecurrentThis object indicates if the ONT alarm appends LOID. Options: 1.enable(1) - The ONT alarm appends LOID. 2.disable(2) - The ONT alarm does not append LOID. The …
1.3.6.1.4.1.2011.6.145.1.1.5.2TablehwXponDeviceOntPowerSheddingProfileTablenot-accessiblecurrentThe hwXponDeviceOntPowerSheddingProfileTable is used to config the ONT power shedding profile. The index of this table is hwXponDeviceOntPowerSheddingProfileNa…
1.3.6.1.4.1.2011.6.145.1.1.5.2.1RowhwXponDeviceOntPowerSheddingProfileEntrynot-accessiblecurrentThe hwXponDeviceOntPowerSheddingProfileTable is used to config the ONT power shedding profile. The index of this entry is hwXponDeviceOntPowerSheddingProfileNa…
1.3.6.1.4.1.2011.6.145.1.1.5.2.1.1ColumnhwXponDeviceOntPowerSheddingProfileNameIndexnot-accessiblecurrentThis object indicates the ONT power shedding profile name index.
1.3.6.1.4.1.2011.6.145.1.1.5.2.1.2ColumnhwXponDeviceOntPowerSheddingProfileBindNumread-onlycurrentThis object indicates the number of ONT bound with power shedding profile.
1.3.6.1.4.1.2011.6.145.1.1.5.2.1.3ColumnhwXponDeviceOntPowerSheddingIntervalClassDataread-writecurrentThis object indicates the power shedding interval of data class service. Options: 1: disables power shedding(0) 2: enables immediate power shed(1) 3. 2-65535 -…
1.3.6.1.4.1.2011.6.145.1.1.5.2.1.4ColumnhwXponDeviceOntPowerSheddingIntervalClassVoiceread-writecurrentThis object indicates the power shedding interval of voice class service. Options: 1: disables power shedding(0) 2: enables immediate power shed(1) 3. 2-65535 …
1.3.6.1.4.1.2011.6.145.1.1.5.2.1.5ColumnhwXponDeviceOntPowerSheddingIntervalClassVideoOverlayread-writecurrentThis object indicates the power shedding interval of video overlay class service. Options: 1: disables power shedding(0) 2: enables immediate power shed(1) 3. …
1.3.6.1.4.1.2011.6.145.1.1.5.2.1.6ColumnhwXponDeviceOntPowerSheddingIntervalClassVideoReturnread-writecurrentThis object indicates the power shedding interval of video return class service. Options: 1: disables power shedding(0) 2: enables immediate power shed(1) 3. 2…
1.3.6.1.4.1.2011.6.145.1.1.5.2.1.7ColumnhwXponDeviceOntPowerSheddingIntervalClassDslread-writecurrentThis object indicates the power shedding interval of DSL class service. Options: 1: disables power shedding(0) 2: enables immediate power shed(1) 3. 2-65535 - …
1.3.6.1.4.1.2011.6.145.1.1.5.2.1.8ColumnhwXponDeviceOntPowerSheddingIntervalClassAtmread-writecurrentThis object indicates the power shedding interval of ATM class service. Options: 1: disables power shedding(0) 2: enables immediate power shed(1) 3. 2-65535 - …
1.3.6.1.4.1.2011.6.145.1.1.5.2.1.9ColumnhwXponDeviceOntPowerSheddingIntervalClassCesread-writecurrentThis object indicates the power shedding interval of CES class service. Options: 1: disables power shedding(0) 2: enables immediate power shed(1) 3. 2-65535 - …
1.3.6.1.4.1.2011.6.145.1.1.5.2.1.10ColumnhwXponDeviceOntPowerSheddingIntervalClassFrameread-writecurrentThis object indicates the power shedding interval of frame class service. Options: 1: disables power shedding(0) 2: enables immediate power shed(1) 3. 2-65535 …
1.3.6.1.4.1.2011.6.145.1.1.5.2.1.11ColumnhwXponDeviceOntPowerSheddingIntervalClassSdhSonetread-writecurrentThis object indicates the power shedding interval of sdh-sonet class service. Options: 1: disables power shedding(0) 2: enables immediate power shed(1) 3. 2-65…
1.3.6.1.4.1.2011.6.145.1.1.5.2.1.12ColumnhwXponDeviceOntPowerSheddingRestoreIntervalread-writecurrentThis object indicates the time delay, in seconds, before resetting the power-shedding timers after full power restoration.
1.3.6.1.4.1.2011.6.145.1.1.5.2.1.13ColumnhwXponDeviceOntPowerSheddingProfileRowStatusread-createcurrentThe hwXponDeviceOntPowerSheddingProfileRowStatus is used to create a new row or to modify or delete an existing row in this table. Options: 1. createAndGo(4) -…
1.3.6.1.4.1.2011.6.145.1.1.5.3TablehwXponOntTr069ServerProfileTablenot-accessiblecurrentThis table is used to create, delete or modify the tr069 server profile. The index of this table is hwXponOntTr069ServerProfileName.
1.3.6.1.4.1.2011.6.145.1.1.5.3.1RowhwXponOntTr069ServerProfileEntrynot-accessiblecurrentThis table is used to create, delete or modify the tr069 server profile. The index of this entry is hwXponOntTr069ServerProfileName.
1.3.6.1.4.1.2011.6.145.1.1.5.3.1.1ColumnhwXponOntTr069ServerProfileNamenot-accessiblecurrentThis object indicates the tr069-server-profile name.
1.3.6.1.4.1.2011.6.145.1.1.5.3.1.2ColumnhwXponOntTr069ServerProfileBindTimesread-onlycurrentThis object indicates the number of ONT bound with tr069-server-profile.
1.3.6.1.4.1.2011.6.145.1.1.5.3.1.3ColumnhwXponOntTr069ServerProfileUrlread-writecurrentThis object indicates the server URL. For example: you can set the value of the leaf like 'www.huawei.com'.
1.3.6.1.4.1.2011.6.145.1.1.5.3.1.4ColumnhwXponOntTr069ServerProfileUserNameread-writecurrentThis object indicates the user name.
1.3.6.1.4.1.2011.6.145.1.1.5.3.1.5ColumnhwXponOntTr069ServerProfilePasswordread-writecurrentThis object indicates the user password.
1.3.6.1.4.1.2011.6.145.1.1.5.3.1.6ColumnhwXponOntTr069ServerProfileRealmread-writecurrentThis object indicates the server realm.
1.3.6.1.4.1.2011.6.145.1.1.5.3.1.7ColumnhwXponOntTr069ServerProfileRowStatusread-createcurrentTRow status. This object is used to differentiate the creation, modification and deletion operations for an object. Options: 1. createAndGo(4) -create a new in…
1.3.6.1.4.1.2011.6.145.1.1.5.4TablehwXponOntAlarmPolicyAlarmTablenot-accessiblecurrentThis table is used to set the ONT alarm level. The index of this table is hwXponOntAlarmPolicyCfgNameIndex and hwXponOntAlarmPolicyAlarmId.
1.3.6.1.4.1.2011.6.145.1.1.5.4.1RowhwXponOntAlarmPolicyAlarmEntrynot-accessiblecurrentThis table is used to set the ONT alarm level. The index of this entry is hwXponOntAlarmPolicyCfgNameIndex and hwXponOntAlarmPolicyAlarmId.
1.3.6.1.4.1.2011.6.145.1.1.5.4.1.1ColumnhwXponOntAlarmPolicyCfgNameIndexnot-accessiblecurrentThis object indicates the ONT alarm policy profile name index.
1.3.6.1.4.1.2011.6.145.1.1.5.4.1.2ColumnhwXponOntAlarmPolicyAlarmIdnot-accessiblecurrentThis object indicates the ONT alarm ID.
1.3.6.1.4.1.2011.6.145.1.1.5.4.1.3ColumnhwXponOntAlarmPolicyAlarmLevelread-writecurrentThis object indicates the ONT alarm level. Options: 1. critical(1) - The ONT alarm level is critical. 2. major(2) - The ONT alarm level is major. 3. minor(3) -…
1.3.6.1.4.1.2011.6.145.1.1.5.5TablehwXponOntFtpServerProfileTablenot-accessiblecurrentThis table is used to create, delete or modify the FTP server profile. The index of this table is hwXponOntFtpServerProfileNameIndex.
1.3.6.1.4.1.2011.6.145.1.1.5.5.1RowhwXponOntFtpServerProfileEntrynot-accessiblecurrentThis table is used to create, delete or modify the FTP server profile. The index of this entry is hwXponOntFtpServerProfileNameIndex.
1.3.6.1.4.1.2011.6.145.1.1.5.5.1.1ColumnhwXponOntFtpServerProfileNameIndexnot-accessiblecurrentThis object indicates the name of FTP server profile.
1.3.6.1.4.1.2011.6.145.1.1.5.5.1.2ColumnhwXponOntFtpServerProfileAddressread-writecurrentThis object indicates the address of FTP server profile. the format of string should be like ftp://127.0.0.1 or ftps://127.0.0.1
1.3.6.1.4.1.2011.6.145.1.1.5.5.1.3ColumnhwXponOntFtpServerProfilePortread-writecurrentThis object indicates the port of FTP server profile. The default value is 21.
1.3.6.1.4.1.2011.6.145.1.1.5.5.1.4ColumnhwXponOntFtpServerProfileUserNameread-writecurrentThis object indicates the user name of FTP server.
1.3.6.1.4.1.2011.6.145.1.1.5.5.1.5ColumnhwXponOntFtpServerProfilePasswordread-writecurrentThis object indicates the password of FTP server.
1.3.6.1.4.1.2011.6.145.1.1.5.5.1.6ColumnhwXponOntFtpServerProfileRowStatusread-createcurrentThe hwXponOntFtpServerProfileRowStatus is used to create a new row or to modify or to delete an existing row in this table. Options: 1. createAndGo(4) -create …
1.3.6.1.4.1.2011.6.145.1.1.5.6TablehwXponDeviceOntPowerReductionProfileTablenot-accessiblecurrentThis table is used to create, delete, or modify the power reduction profile. It can contain 32 power reduction profiles in total.Power reduction profile is a k…
1.3.6.1.4.1.2011.6.145.1.1.5.6.1RowhwXponDeviceOntPowerReductionProfileEntrynot-accessiblecurrentThis table is used to create, delete, or modify the power reduction profile. It can contain 32 power reduction profiles in total.Power reduction profile is a k…
1.3.6.1.4.1.2011.6.145.1.1.5.6.1.1ColumnhwXponDeviceOntPowerReductionProfileNameIndexnot-accessiblecurrentThis object indicates the name of the power reduction profile.
1.3.6.1.4.1.2011.6.145.1.1.5.6.1.2ColumnhwXponDeviceOntPowerReductionProfileBindNumread-onlycurrentThis object indicates the number of ONTs bound with power reduction profile.
1.3.6.1.4.1.2011.6.145.1.1.5.6.1.3ColumnhwXponDeviceOntPowerReductionModeread-writecurrentThis object indicates the power reduction mode of this profile. Options: 1.disable(1) -disable mode:disable power reduction function for this profile,then ONTs…
1.3.6.1.4.1.2011.6.145.1.1.5.6.1.4ColumnhwXponDeviceOntPowerReductionSleepIntervalread-writecurrentIndicateas the time that ONT stays in a LowPower status in power reduction state periodicly. The valid value range is 1 The default value is 200ms
1.3.6.1.4.1.2011.6.145.1.1.5.6.1.5ColumnhwXponDeviceOntPowerReductionAwakeIntervalread-writecurrentIndicateas the time that ONT stays in awake status in power reduction state periodicly The valid value range is 1 The default value is 20ms
1.3.6.1.4.1.2011.6.145.1.1.5.6.1.6ColumnhwXponDeviceOntPowerReductionEnterIntervalread-writecurrentIndicates the time interval that ONT needs to enter power reduction state,during this time,the ONT will check if it can enter power reduction state. The valid …
1.3.6.1.4.1.2011.6.145.1.1.5.6.1.7ColumnhwXponDeviceOntPowerReductionUpstreamEnterRateread-writecurrentIndicates the upstream rate threshold that ONT needs to enter power reduction state,during enter-interval time,if its upstream rate is continuously lower then …
1.3.6.1.4.1.2011.6.145.1.1.5.6.1.8ColumnhwXponDeviceOntPowerReductionDownstreamEnterRateread-writecurrentIndicates the downstream rate threshold that ONT needs to enter power reduction state,during enter-interval time,if its downstream rate is continuously lower t…
1.3.6.1.4.1.2011.6.145.1.1.5.6.1.9ColumnhwXponDeviceOntPowerReductionExitIntervalread-writecurrentIndicates the time interval that ONT needs to exit power reduction state,during this time,the ONT will check if it need to exit power reduction state. The vali…
1.3.6.1.4.1.2011.6.145.1.1.5.6.1.10ColumnhwXponDeviceOntPowerReductionUpstreamExitRateread-writecurrentIndicates the upstream rate threshold that ONT needs to exit power reduction state,during exit-interval time,if its upstream rate is continuously higher then t…
1.3.6.1.4.1.2011.6.145.1.1.5.6.1.11ColumnhwXponDeviceOntPowerReductionDownstreamExitRateread-writecurrentIndicates the downstream rate threshold that ONT needs to exit power reduction state. during exit-interval time,if its downstream rate is continuously higher t…
1.3.6.1.4.1.2011.6.145.1.1.5.6.1.12ColumnhwXponDeviceOntPowerReductionUpstreamExitBurstRateread-writecurrentIndicates the upstream burst rate threshold that ONT needs to exit power reduction state. during exit-interval time,if its upstream burst rate is higher then t…
1.3.6.1.4.1.2011.6.145.1.1.5.6.1.13ColumnhwXponDeviceOntPowerReductionDownstreamExitBurstRateread-writecurrentIndicates the downstream burst rate threshold that ONT needs to exit power reduction state. during exit-interval time,if its downstream burst rate is higher th…
1.3.6.1.4.1.2011.6.145.1.1.5.6.1.14ColumnhwXponDeviceOntPowerReductionTimeRangeread-writecurrentIndicates the time range that the ONT can be in power reduction state,in the specific time range,if the ONT meets the conditions need to enter power reduction …
1.3.6.1.4.1.2011.6.145.1.1.5.6.1.15ColumnhwXponDeviceOntPowerReductionEnableDayofWeekread-writecurrentThe values are as follows: Sunday: 0x01 Monday: 0x02 Tuesday: 0x04 Wednesday: 0x08 Thursday: 0x10 Friday: 0x20 Saturday: 0x40 If the value is set to Sunday and…
1.3.6.1.4.1.2011.6.145.1.1.5.6.1.16ColumnhwXponDeviceOntPowerReductionStartTimeread-writecurrentIndicates the start time of a periodic time range,example:0x08 0x1E means 08:30
1.3.6.1.4.1.2011.6.145.1.1.5.6.1.17ColumnhwXponDeviceOntPowerReductionEndTimeread-writecurrentIndicates the end time of a periodic time range,example:0x08 0x1E means 08:30
1.3.6.1.4.1.2011.6.145.1.1.5.6.1.18ColumnhwXponDeviceOntPowerReductionProfileRowStatusread-createcurrentThe hwXponDeviceOntPowerReductionProfileRowStatus is used to create a new row or to modify or to delete an existing row in this table. Options: 1. createAndGo(…
1.3.6.1.4.1.2011.6.145.1.1.5.7TablehwXponOntEthPortPoeConfigTablenot-accessiblecurrentThis table is used to set the PoE configuration of the ONT Ethernet port. The indexes of this table are ifIndex, hwXponOntIndex and hwXponOntEthPortId.
1.3.6.1.4.1.2011.6.145.1.1.5.7.1RowhwXponOntEthPortPoeConfigEntrynot-accessiblecurrentThis table is used to set the PoE configuration of the ONT Ethernet port. The indexes of this entry are ifIndex, hwXponOntIndex and hwXponOntEthPortId.
1.3.6.1.4.1.2011.6.145.1.1.5.7.1.1ColumnhwXponOntEthPortIdnot-accessiblecurrentONT ETH port ID.
1.3.6.1.4.1.2011.6.145.1.1.5.7.1.2ColumnhwXponOntEthPortPoeSwitchread-writecurrentThis object indicates the power supply switch of the ONT Ethernet port. Options: 1. enable(1) - Indicates that the power supply switch of the ONT Ethernet port…
1.3.6.1.4.1.2011.6.145.1.1.5.7.1.3ColumnhwXponOntEthPortPoeModeread-writecurrentThis object indicates the power supply mode of the ONT Ethernet port. Options: 1. signal(1) - Indicates that the power supply mode of the ONT Ethernet port is …
1.3.6.1.4.1.2011.6.145.1.1.5.7.1.4ColumnhwXponOntEthPortPoePriorityread-writecurrentThis object indicates the power supply priority of the ONT Ethernet port. Options: 1. critical(1) - Indicates that the power supply of the ONT Ethernet port is…
1.3.6.1.4.1.2011.6.145.1.1.5.7.1.5ColumnhwXponOntEthPortPoePowerClassread-writecurrentThis object indicates the power supply classification of the ONT Ethernet port. Options: 1. default(1) - Indicates the default power supply classification of t…
1.3.6.1.4.1.2011.6.145.1.1.5.8TablehwXponOntEthPortPoeStatusTablenot-accessiblecurrentThis table is used to query the PoE stauts of the ONT Ethernet port. The indexes of this table are ifIndex, hwXponOntIndex and hwXponOntEthPortId.
1.3.6.1.4.1.2011.6.145.1.1.5.8.1RowhwXponOntEthPortPoeStatusEntrynot-accessiblecurrentThis table is used to query the PoE stauts of the ONT Ethernet port. The indexes of this entry are ifIndex, hwXponOntIndex and hwXponOntEthPortId.
1.3.6.1.4.1.2011.6.145.1.1.5.8.1.1ColumnhwXponOntEthPortPoePowerSupplyCapabilityread-onlycurrentThis object indicates the power supply capability of the ONT Ethernet port. Options: 1. capable(1) - Indicates that the ONT Ethernet port can supply power to t…
1.3.6.1.4.1.2011.6.145.1.1.5.8.1.2ColumnhwXponOntEthPortPoePowerDetectionStatusread-onlycurrentThis object indicates the power detection status of the ONT Ethernet port. Options: 1. noneed(1) - Indicates that the ONT Ethernet port does not need to supply…
1.3.6.1.4.1.2011.6.145.1.1.5.8.1.3ColumnhwXponOntEthPortPoePowerClassificationStatusread-onlycurrentThis object indicates the power supply classification of the ONT Ethernet port. Options: 1. undefined(1) - Indicates that the actual power classification of th…
1.3.6.1.4.1.2011.6.145.1.1.5.8.1.4ColumnhwXponOntEthPortPoeInvalidSignatureCounterread-onlycurrentThis object indicates the invalid signature statistics of the ONT Ethernet port.
1.3.6.1.4.1.2011.6.145.1.1.5.8.1.5ColumnhwXponOntEthPortPoePowerDeniedCounterread-onlycurrentThis object indicates the statistics of the ONT Ethernet port which refused to supply power to the PD.
1.3.6.1.4.1.2011.6.145.1.1.5.8.1.6ColumnhwXponOntEthPortPoeOverloadCounterread-onlycurrentThis object indicates the power overload statistics of ONT Ethernet port.
1.3.6.1.4.1.2011.6.145.1.1.5.8.1.7ColumnhwXponOntEthPortPoeShortCounterread-onlycurrentThis object indicates the current overload statistics of the ONT Ethernet port.
1.3.6.1.4.1.2011.6.145.1.1.5.8.1.8ColumnhwXponOntEthPortPoeMpsAbsentCounterread-onlycurrentThis object indicates the disconnected statistics of the ONT Ethernet port.
1.3.6.1.4.1.2011.6.145.1.1.5.9TablehwXponTrafficAlarmProfileTablenot-accessiblecurrentThis is the traffic alarm profile infomation table. The index of this table is hwXponTrafficAlarmProfileNameIndex.
1.3.6.1.4.1.2011.6.145.1.1.5.9.1RowhwXponTrafficAlarmProfileEntrynot-accessiblecurrentThis is the traffic alarm profile infomation table. The index of this entry is hwXponTrafficAlarmProfileNameIndex.
1.3.6.1.4.1.2011.6.145.1.1.5.9.1.1ColumnhwXponTrafficAlarmProfileNameIndexnot-accessiblecurrentThis object indicates the traffic alarm profile name index.
1.3.6.1.4.1.2011.6.145.1.1.5.9.1.2ColumnhwXponTrafficAlarmProfileBindNumread-onlycurrentThis object indicates the traffic alarm profile binding times.
1.3.6.1.4.1.2011.6.145.1.1.5.9.1.3ColumnhwXponTrafficAlarmProfileDetectIntervalread-writecurrentThis object indicates the traffic congestion detection interval. It is defined as an 32-bit integer whose unit is 's'(second)
1.3.6.1.4.1.2011.6.145.1.1.5.9.1.4ColumnhwXponTrafficAlarmProfileDetectTimesread-writecurrentThis object indicates the traffic congestion detection times.
1.3.6.1.4.1.2011.6.145.1.1.5.9.1.5ColumnhwXponTrafficAlarmProfileAlarmDetectTimesread-writecurrentThis object indicates the alarm threshold of the congestion detection.
1.3.6.1.4.1.2011.6.145.1.1.5.9.1.6ColumnhwXponTrafficAlarmProfileWarningDetectTimesread-writecurrentThis object indicates the warning threshold of the congestion detection.
1.3.6.1.4.1.2011.6.145.1.1.5.9.1.7ColumnhwXponTrafficAlarmProfileUpRatioThresholdread-writecurrentThis object indicates the ratio of upstream congestion threshold.
1.3.6.1.4.1.2011.6.145.1.1.5.9.1.8ColumnhwXponTrafficAlarmProfileDownRatioThresholdread-writecurrentThis object indicates the ratio of downstream congestion threshold.
1.3.6.1.4.1.2011.6.145.1.1.5.9.1.9ColumnhwXponTrafficAlarmProfileRowStatusread-createcurrentThe hwXponTrafficAlarmProfileRowStatus is used to create a new row or to modify or delete an existing row in this table. Options: 1. createAndGo(4) -create a n…
1.3.6.1.4.1.2011.6.145.1.1.5.10TablehwXponOntWanProfileTablenot-accessiblecurrentThis is the ONT wan profile infomation table. The index of this table is hwXponOntWanProfileNameIndex.
1.3.6.1.4.1.2011.6.145.1.1.5.10.1RowhwXponOntWanProfileEntrynot-accessiblecurrentThis is the ONT wan profile infomation table. The index of this entry is hwXponOntWanProfileNameIndex.
1.3.6.1.4.1.2011.6.145.1.1.5.10.1.1ColumnhwXponOntWanProfileNameIndexnot-accessiblecurrentThis object indicates the ont wan profile name index.
1.3.6.1.4.1.2011.6.145.1.1.5.10.1.2ColumnhwXponOntWanProfileBindNumread-onlycurrentThis object indicates the number of ont bound with wan profile.
1.3.6.1.4.1.2011.6.145.1.1.5.10.1.3ColumnhwXponOntWanProfileConnectionTyperead-writecurrentThis object indicates the connection type of ONT wan. Options: 1. route(1) - Indicates that the connection type of ont wan is route. 2. bridge(2) - Indicates t…
1.3.6.1.4.1.2011.6.145.1.1.5.10.1.4ColumnhwXponOntWanProfileNatSwitchread-writecurrentThis object indicates the NAT switch of ont wan. Options: 1. enable(1) - Indicates that the NAT switch of ont wan is enable. 2. disable(2) - Indicates that the…
1.3.6.1.4.1.2011.6.145.1.1.5.10.1.5ColumnhwXponOntWanProfileRowStatusread-createcurrentThe hwXponOntWanProfileRowStatus is used to create a new row or to modify or delete an existing row in this table. Options: 1. createAndGo(4) -create a new ins…
1.3.6.1.4.1.2011.6.145.1.1.5.11TablehwXponOntPolicyRouteProfileTablenot-accessiblecurrentThis is the ont policy route profile infomation table. The index of this table is hwXponOntPolicyRouteProfileNameIndex.
1.3.6.1.4.1.2011.6.145.1.1.5.11.1RowhwXponOntPolicyRouteProfileEntrynot-accessiblecurrentThis is the ont policy route profile infomation table. The index of this entry is hwXponOntPolicyRouteProfileNameIndex.
1.3.6.1.4.1.2011.6.145.1.1.5.11.1.1ColumnhwXponOntPolicyRouteProfileNameIndexnot-accessiblecurrentThis object indicates the ont policy route profile index.
1.3.6.1.4.1.2011.6.145.1.1.5.11.1.2ColumnhwXponOntPolicyRouteProfileBindNumread-onlycurrentThis object indicates the number of ont bound with policy route profile.
1.3.6.1.4.1.2011.6.145.1.1.5.11.1.3ColumnhwXponOntPolicyRouteProfileRowStatusread-createcurrentThe hwXponOntPolicyRouteProfileRowStatus is used to create a new row or to modify or delete an existing row in this table. Options: 1. createAndGo(4) -create a…
1.3.6.1.4.1.2011.6.145.1.1.5.12TablehwXponOntPolicyRouteProfilePortCfgTablenot-accessiblecurrentThis is the ont policy route profile port configuration infomation table. The index of this table is hwXponOntPolicyRouteProfilePortCfgProfNameIndex.
1.3.6.1.4.1.2011.6.145.1.1.5.12.1RowhwXponOntPolicyRouteProfilePortCfgEntrynot-accessiblecurrentThis is the ont policy route profile port configuration infomation table. The index of this entry is hwXponOntPolicyRouteProfilePortCfgProfNameIndex.
1.3.6.1.4.1.2011.6.145.1.1.5.12.1.1ColumnhwXponOntPolicyRouteProfilePortCfgProfNameIndexnot-accessiblecurrentThis object indicates the ont policy route profile index.
1.3.6.1.4.1.2011.6.145.1.1.5.12.1.2ColumnhwXponOntPolicyRouteProfilePortCfgIndexread-writecurrentThis object indicates the policy route rule index.
1.3.6.1.4.1.2011.6.145.1.1.5.12.1.3ColumnhwXponOntPolicyRouteProfilePortCfgWanIndexread-writecurrentThis object indicates the index of wan appointed by ont policy route.
1.3.6.1.4.1.2011.6.145.1.1.5.12.1.4ColumnhwXponOntPolicyRouteProfilePortCfgEthPortBitMapread-writecurrentThis object indicates the mask of ethport using the policy route rule.
1.3.6.1.4.1.2011.6.145.1.1.5.12.1.5ColumnhwXponOntPolicyRouteProfilePortCfgWlanPortBitMapread-writecurrentThis object indicates the mask of wan using the policy route rule.
1.3.6.1.4.1.2011.6.145.1.1.5.12.1.6ColumnhwXponOntPolicyRouteProfilePortCfgRowStatusread-createcurrentThe hwXponOntPolicyRouteProfilePortCfgRowStatus is used to create a new row or to modify or delete an existing row in this table. Options: 1. createAndGo(4) -c…
1.3.6.1.4.1.2011.6.145.1.1.5.13TablehwXponOntEthernetPortOpticalStaticInfoTablenot-accessiblecurrentThis table is the ont ethernet port optical static infomation. The indexes of this table are ifIndex hwXponOntIndex and hwXponOntEthPortId.
1.3.6.1.4.1.2011.6.145.1.1.5.13.1RowhwXponOntEthernetPortOpticalStaticInfoEntrynot-accessiblecurrentThis table is the ont ethernet port optical static infomation. The indexes of this entry are ifIndex hwXponOntIndex and hwXponOntEthPortId.
1.3.6.1.4.1.2011.6.145.1.1.5.13.1.1ColumnhwXponOntEthernetPortOpticalIdentifierread-onlycurrentIndicate the identifier of optical module. Options: 1. unknown(1) -unknown the identifier of optical module 2. gbic(2) -the identifier of optical module is gbi…
1.3.6.1.4.1.2011.6.145.1.1.5.13.1.2ColumnhwXponOntEthernetPortOpticalExtIDread-onlycurrentIndicate the extended type of optical module. Options: 1. notSpecifiedOrNotCompliant(1) -the extended type of optical module is notSpecifiedOrNotCompliant 2. m…
1.3.6.1.4.1.2011.6.145.1.1.5.13.1.3ColumnhwXponOntEthernetPortOpticalConnectorread-onlycurrentIndicate the type of optical module connector. Options: 1. unknown(1) -unknown the type of optical module connector. 2. sc(2) -the type of optical module conne…
1.3.6.1.4.1.2011.6.145.1.1.5.13.1.4ColumnhwXponOntEthernetPortOpticalVendorNameread-onlycurrentIndicate the vendor name of a optical module.
1.3.6.1.4.1.2011.6.145.1.1.5.13.1.5ColumnhwXponOntEthernetPortOpticalVendorRevread-onlycurrentIndicate the revision level for part number provided by vendor.
1.3.6.1.4.1.2011.6.145.1.1.5.13.1.6ColumnhwXponOntEthernetPortOpticalVendorPNread-onlycurrentIndicate the part number of a optical module provided by vendor.
1.3.6.1.4.1.2011.6.145.1.1.5.13.1.7ColumnhwXponOntEthernetPortOpticalVendorSNread-onlycurrentThe serial number of a optical module provided by vendor.
1.3.6.1.4.1.2011.6.145.1.1.5.13.1.8ColumnhwXponOntEthernetPortOpticalDateCoderead-onlycurrentThe date code of a optical module.
1.3.6.1.4.1.2011.6.145.1.1.5.13.1.9ColumnhwXponOntEthernetPortOpticalSFF8472Complianceread-onlycurrentIndicate the SFF-8472 standard. Options: 1. undefined(1) -not included or undefined. 2. includesSFF8472V93(2) -includes functionality described in SFF-8472 Rev…
1.3.6.1.4.1.2011.6.145.1.1.5.13.1.10ColumnhwXponOntEthernetPortOptical10GEComplianceCodesread-onlycurrentIndicate the 10G ethernet transceiver type. Options: 1. en10GBASELRM(1) -Ethernet transceiver type is 10GBASE-LRM 2. en10GBASELR(2) -Ethernet transceiver type …
1.3.6.1.4.1.2011.6.145.1.1.5.13.1.11ColumnhwXponOntEthernetPortOpticalGEComplianceCodesread-onlycurrentIndicate the 1G ethernet transceiver type. Options: 1. en1000BASET(1) -Ethernet transceiver type is 1000BASE-T 2. en1000BASECX(2) -Ethernet transceiver type is…
1.3.6.1.4.1.2011.6.145.1.1.5.13.1.12ColumnhwXponOntEthernetPortOpticalSpeedread-onlycurrentIndicate the fibre Channel speed. Options: 1. speed400MBytesPerSec(1) -fibre channel speed is 400 MBytes/s 2. speed200MBytesPerSec(2) -fibre channel speed is 2…
1.3.6.1.4.1.2011.6.145.1.1.5.13.1.13ColumnhwXponOntEthernetPortOpticalLength9Micronkmread-onlycurrentIndicate the link length that is supported by the transceiver while operating in compliance with the applicable standards using 9 micron Single-mode Fiber. 0-2…
1.3.6.1.4.1.2011.6.145.1.1.5.13.1.14ColumnhwXponOntEthernetPortOpticalLength9Micronread-onlycurrentIndicate the link length that is supported by the transceiver while operating in compliance with the applicable standards using 9 micron Single-mode Fiber. 0~2…
1.3.6.1.4.1.2011.6.145.1.1.5.13.1.15ColumnhwXponOntEthernetPortOpticalLength50Micronread-onlycurrentIndicate link length that is supported by the transceiver while operating in compliance with applicable standards using 50 micron multi-mode OM2 [500MHz*km] fi…
1.3.6.1.4.1.2011.6.145.1.1.5.13.1.16ColumnhwXponOntEthernetPortOpticalLength62Micron5read-onlycurrentIndicate link length that is supported by the transceiver while operating in compliance with applicable standards using 62.5 micron multi-mode OM1 [200 MHz*km]…
1.3.6.1.4.1.2011.6.145.1.1.5.13.1.17ColumnhwXponOntEthernetPortOpticalLengthCopperread-onlycurrentIndicate Link length supported for copper. Unit: 1m Invalid(-1) - Indicates that the query fails or no information is detected
1.3.6.1.4.1.2011.6.145.1.1.5.13.1.18ColumnhwXponOntEthernetPortOpticalWaveLengthread-onlycurrentThe laser wavelength. Unit: 1nm Invalid(-1) - Indicates that the query fails or no information is detected
1.3.6.1.4.1.2011.6.145.1.1.5.13.1.19ColumnhwXponOntEthernetPortOpticalBrNominalread-onlycurrentIndicate Nominal bit rate. Unit: 100 MBits/sec Invalid(-1) - Indicates that the query fails or no information is detected
1.3.6.1.4.1.2011.6.145.1.1.5.13.1.20ColumnhwXponOntEthernetPortOpticalBrMaxread-onlycurrentThe upper bit rate margin. Invalid(-1) - Indicates that the query fails or no information is detected
1.3.6.1.4.1.2011.6.145.1.1.5.13.1.21ColumnhwXponOntEthernetPortOpticalBrMinread-onlycurrentThe lower bit rate margin. Invalid(-1) - Indicates that the query fails or no information is detected
1.3.6.1.4.1.2011.6.145.1.1.5.13.1.22ColumnhwXponOntEthernetPortOpticalCcBaseread-onlycurrentThe check code for the base ID fields. Invalid(-1) - Indicates that the query fails or no information is detected
1.3.6.1.4.1.2011.6.145.1.1.5.13.1.23ColumnhwXponOntEthernetPortOpticalCcExtread-onlycurrentThe check code for the extended ID fields. Invalid(-1) - Indicates that the query fails or no information is detected
1.3.6.1.4.1.2011.6.145.1.1.5.14TablehwXponOntEthernetPortOpticalDdmInfoTablenot-accessiblecurrentThis table is the ont ethernet port optical Ddm infomation. The indexes of this table are ifIndex hwXponOntIndex and hwXponOntEthPortId.
1.3.6.1.4.1.2011.6.145.1.1.5.14.1RowhwXponOntEthernetPortOpticalDdmInfoEntrynot-accessiblecurrentThis table is the ont ethernet port optical Ddm infomation. The indexes of this entry are ifIndex hwXponOntIndex and hwXponOntEthPortId.
1.3.6.1.4.1.2011.6.145.1.1.5.14.1.1ColumnhwXponOntEthernetPortOpticalDdmTemperatureread-onlycurrentThe temperature of the optical module. Unit: unit C(centigrade)
1.3.6.1.4.1.2011.6.145.1.1.5.14.1.2ColumnhwXponOntEthernetPortOpticalDdmBiasCurrentread-onlycurrentThe Bias Current of the optical module. Unit: mA
1.3.6.1.4.1.2011.6.145.1.1.5.14.1.3ColumnhwXponOntEthernetPortOpticalDdmTxPowerread-onlycurrentThe transmitting power of the optical module. Unit: 0.01dBm
1.3.6.1.4.1.2011.6.145.1.1.5.14.1.4ColumnhwXponOntEthernetPortOpticalDdmRxPowerread-onlycurrentThe receiving power of the optical module. Unit: 0.01dBm
1.3.6.1.4.1.2011.6.145.1.1.5.14.1.5ColumnhwXponOntEthernetPortOpticalDdmVoltageread-onlycurrentThe power feed voltage of the optical module. Unit: mV
1.3.6.1.4.1.2011.6.145.1.1.6NodehwEponDeviceCommonGlobalObjects
1.3.6.1.4.1.2011.6.145.1.1.6.1ScalarhwEponInteroperModeGlobalStandardread-writecurrentThe switch mode of epon ont interoperability. Options: 1. ctc(1) - The mode standard of epon ont interoperability is ctc 2. cuc(2) - The mode standard of epon …
1.3.6.1.4.1.2011.6.145.1.1.6.2ScalarhwEponInteroperModeGlobalActiveModeread-writecurrentThe active mode of epon ONT interoperability mode. Options: 1. immediate(1) - Indicates that the epon ONT takes effect immediately 2. nextStartup(2) - Indicate…
MIB Viewer