HpicfHighAvailability-MIB
30 objects
Management information for configuring Redundant Management module on Hewlett-Packard network devices.
Imported Objects
| ENTITY-MIB | entPhysicalIndex PhysicalIndex |
| ENTITY-STATE-MIB | EntityStandbyStatus |
| HP-ICF-OID | hpicfCommon |
| SNMPv2-CONF | MODULE-COMPLIANCE OBJECT-GROUP |
| SNMPv2-SMI | Counter32 Integer32 MODULE-IDENTITY OBJECT-TYPE TimeTicks Unsigned32 |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.11.2.14.11.1.11 | IdentityhpicfHighAvailability | Management information for configuring Redundant Management module on Hewlett-Packard network devices. | ||
| 1.3.6.1.4.1.11.2.14.11.1.11.1 | NodehpicfHAConfigObjects | |||
| 1.3.6.1.4.1.11.2.14.11.1.11.1.1 | ScalarhpicfHARedundancyManagementModuleMode | read-write | current | Specify to enable/disable this feature. Enabling allows for management module redundancy when there are two management modules in the switch and does a hitless… |
| 1.3.6.1.4.1.11.2.14.11.1.11.1.2 | ScalarhpicfHAContinuousFwdingTime | read-write | current | This is a configurable timer. After the failover, on the new AMM, the route and neighbor table entries are marked as stale in the FIB. As routing protocols beg… |
| 1.3.6.1.4.1.11.2.14.11.1.11.2 | NodehpicfHAStatusObjects | |||
| 1.3.6.1.4.1.11.2.14.11.1.11.2.1 | ScalarhpicfHAMgmtRedundancyFailureReason | read-only | current | Specifies the reason a redundant management module failed to become a standby module. |
| 1.3.6.1.4.1.11.2.14.11.1.11.2.2 | ScalarhpicfHAMgmtFailovers | read-only | current | Specifies the number of management module failovers since last chassis boot. |
| 1.3.6.1.4.1.11.2.14.11.1.11.2.3 | ScalarhpicfHALastFailoverTime | read-only | current | Specifies the time (in hundredths of a second) of the last management module failover. |
| 1.3.6.1.4.1.11.2.14.11.1.11.2.4 | TablehpicfHAFailOverLogTable | not-accessible | current | This table contains High Availability(HA) failover log specific information. |
| 1.3.6.1.4.1.11.2.14.11.1.11.2.4.1 | RowhpicfHAFailOverLogEntry | not-accessible | current | Failover log information maintained for HA. |
| 1.3.6.1.4.1.11.2.14.11.1.11.2.4.1.1 | ColumnhpicfHAFailOverIndex | not-accessible | current | This object uniquely identifies the entries in the failover log table. This table contains maximum of recent 10 entries. |
| 1.3.6.1.4.1.11.2.14.11.1.11.2.4.1.2 | ColumnhpicfHAFailOverMgmtModule | read-only | current | This object displays the management module information.It is similar to entPhysicalIndex. |
| 1.3.6.1.4.1.11.2.14.11.1.11.2.4.1.3 | ColumnhpicfHAFailOverState | read-only | current | This object indicates the failover state. 'unknown' indicates the state of the management module is undefined and this resource is unable to report standby sta… |
| 1.3.6.1.4.1.11.2.14.11.1.11.2.4.1.4 | ColumnhpicfHAFailOverTime | read-only | current | This object indicates the failover time in seconds since 1/1/1990 0:0:0. |
| 1.3.6.1.4.1.11.2.14.11.1.11.2.4.1.5 | ColumnhpicfHAFailOverReason | read-only | current | This object define the reason for failover. 'switchoverReq' indicates failover as a result of switchover command issued by the user. 'buttonReq' indicates fail… |
| 1.3.6.1.4.1.11.2.14.11.1.11.2.5 | TablehpicfHAMgmtModuleTable | not-accessible | current | This table contains High Availability (HA) management module specific information. |
| 1.3.6.1.4.1.11.2.14.11.1.11.2.5.1 | RowhpicfHAMgmtModuleEntry | not-accessible | current | Management module information maintained for HA. |
| 1.3.6.1.4.1.11.2.14.11.1.11.2.5.1.1 | ColumnhpicfHAMgmtModuleState | read-only | current | This object displays the state of the the management module.This object is similar to entStateStandby object. |
| 1.3.6.1.4.1.11.2.14.11.1.11.2.5.1.2 | ColumnhpicfHAMgmtModuleCardUpSince | read-only | current | This object displays the card uptime in seconds since this module state. |
| 1.3.6.1.4.1.11.2.14.11.1.11.2.5.1.3 | ColumnhpicfHAMgmtModuleStateSince | read-only | current | This object displays time in seconds from which the current state is valid. |
| 1.3.6.1.4.1.11.2.14.11.1.11.2.5.1.4 | ColumnhpicfHAMgmtModuleRedundancyState | read-only | current | This object describes the management module's redundancy state. 'unavailable' indicates the redundancy module is not available due to error or absence of the m… |
| 1.3.6.1.4.1.11.2.14.11.1.11.3 | NodehpicfHAConformance | |||
| 1.3.6.1.4.1.11.2.14.11.1.11.3.1 | NodehpicfHACompliances | |||
| 1.3.6.1.4.1.11.2.14.11.1.11.3.1.1 | CompliancehpicfHACompliance | current | The compliance statement for SNMP entities which implement the hpicfHighAvailability MIB. | |
| 1.3.6.1.4.1.11.2.14.11.1.11.3.1.2 | CompliancehpicfHACompliance1 | current | The compliance statement for SNMP entities which implement the hpicfHighAvailability MIB. | |
| 1.3.6.1.4.1.11.2.14.11.1.11.3.2 | NodehpicfHAGroups | |||
| 1.3.6.1.4.1.11.2.14.11.1.11.3.2.1 | GrouphpicfHAConfigGroup | current | The collection of objects which are used to configure the Redundancy Management Module. | |
| 1.3.6.1.4.1.11.2.14.11.1.11.3.2.2 | GrouphpicfHAStatusGroup | current | The collection of objects which are used to represent Management Module statistics information. | |
| 1.3.6.1.4.1.11.2.14.11.1.11.3.2.3 | GrouphpicfHAFailOverGroup | current | The collection of objects which are used to represent failover log statistics information. | |
| 1.3.6.1.4.1.11.2.14.11.1.11.3.2.4 | GrouphpicfHAMgmtModuleGroup | current | The collection of objects which are used to represent management module specific information. |