IBM-LAN-EMULATION-EXTENSION-MIB
213 objects
No module-level DESCRIPTION found.
Imported Objects
| BRIDGE-MIB | BridgeId Timeout |
| LAN-EMULATION-ELAN-MIB | IfIndexOrZero |
| LAN-EMULATION-LES-MIB | lesConfEntry |
| RFC-1212 | OBJECT-TYPE |
| RFC1155-SMI | enterprises |
| SNMPv2-SMI-v1 | Counter32 Gauge32 Integer32 IpAddress TimeTicks |
| SNMPv2-TC-v1 | DisplayString MacAddress RowStatus TimeStamp |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.2 | Nodeibm | |||
| 1.3.6.1.4.1.2.5 | NodeibmArchitecture | |||
| 1.3.6.1.4.1.2.5.8 | NodelanEmulation | |||
| 1.3.6.1.4.1.2.5.8.3 | NodeibmLeServerX | |||
| 1.3.6.1.4.1.2.5.8.3.1 | NodeibmLeServerXMonitoring | |||
| 1.3.6.1.4.1.2.5.8.3.1.1 | NodeibmLeServerXMon | |||
| 1.3.6.1.4.1.2.5.8.3.1.1.1 | ScalaribmLeServerXMonLecsInstances | read-only | mandatory | The number of LECS instances currently created on this agent. |
| 1.3.6.1.4.1.2.5.8.3.1.1.2 | ScalaribmLeServerXMonLesInstances | read-only | mandatory | The number of LES instances currently created on this agent. |
| 1.3.6.1.4.1.2.5.8.3.1.1.3 | ScalaribmLeServerXMonBusInstances | read-only | mandatory | The number of BUS instances currently created on this agent. |
| 1.3.6.1.4.1.2.5.8.3.1.2 | TableibmLeServerXLecsMonTable | not-accessible | mandatory | This table provides monitoring of LECS instances. |
| 1.3.6.1.4.1.2.5.8.3.1.2.1 | RowibmLeServerXLecsMonEntry | not-accessible | mandatory | Entries of ibmLeServerXLecsMonTable. |
| 1.3.6.1.4.1.2.5.8.3.1.2.1.1 | ColumnibmLeServerXLecsMonIndex | not-accessible | mandatory | The index used to identify this LECS instance on this agent. This variable has the same value as the lecsConfIndex used to identify this instance in the LECS M… |
| 1.3.6.1.4.1.2.5.8.3.1.2.1.2 | ColumnibmLeServerXLecsUsedConnections | read-only | mandatory | The number of virtual connections currently in use by this LECS instance. |
| 1.3.6.1.4.1.2.5.8.3.1.3 | TableibmLeServerXLesMonTable | not-accessible | mandatory | This table provides monitoring of LES instances. |
| 1.3.6.1.4.1.2.5.8.3.1.3.1 | RowibmLeServerXLesMonEntry | not-accessible | mandatory | Entries of ibmLeServerXLesMonTable. |
| 1.3.6.1.4.1.2.5.8.3.1.3.1.1 | ColumnibmLeServerXLesMonIndex | not-accessible | mandatory | The index used to identify this LES instance on this agent. This variable has the same value as the lesConfIndex used to identify this instance in the LES MIB. |
| 1.3.6.1.4.1.2.5.8.3.1.3.1.2 | ColumnibmLeServerXLesMonUsedConnections | read-only | mandatory | The number of virtual connections currently in use by this LES instance. |
| 1.3.6.1.4.1.2.5.8.3.1.3.1.3 | ColumnibmLeServerXLesMonLesLecInstances | read-only | mandatory | The number of clients currently served by this LES instance. This is the number of entries in the lesLecTable which have successfully joined this LES instance. |
| 1.3.6.1.4.1.2.5.8.3.1.4 | TableibmLeServerXBusMonTable | not-accessible | mandatory | This table provides monitoring of BUS instances. |
| 1.3.6.1.4.1.2.5.8.3.1.4.1 | RowibmLeServerXBusMonEntry | not-accessible | mandatory | Entries of ibmLeServerXBusMonTable. |
| 1.3.6.1.4.1.2.5.8.3.1.4.1.1 | ColumnibmLeServerXBusMonIndex | not-accessible | mandatory | The index used to identify this BUS instance on this agent. This variable has the same value as the busConfIndex used to identify this instance in the BUS MIB. |
| 1.3.6.1.4.1.2.5.8.3.1.4.1.2 | ColumnibmLeServerXBusMonUsedConnections | read-only | mandatory | The number of virtual connections currently in use by this BUS instance. |
| 1.3.6.1.4.1.2.5.8.3.1.4.1.3 | ColumnibmLeServerXBusMonBusLecInstances | read-only | mandatory | The number of clients currently served by this BUS instance. This is the number of entries in the busLecTable. |
| 1.3.6.1.4.1.2.5.8.3.2 | NodeibmLeServerXConfig | |||
| 1.3.6.1.4.1.2.5.8.3.2.1 | TableibmLeServerXLesConfigTable | not-accessible | mandatory | This table provides extension for LES configuration. |
| 1.3.6.1.4.1.2.5.8.3.2.1.1 | RowibmLeServerXLesConfigEntry | not-accessible | mandatory | Entries of ibmLeServerXLesConfigTable. |
| 1.3.6.1.4.1.2.5.8.3.2.1.1.1 | ColumnibmLeServerXLesMinLecID | read-write | mandatory | The minimum number on the LEC ID range in use by by this LES instance. The default value is 1 the first possible LEC ID. |
| 1.3.6.1.4.1.2.5.8.3.2.1.1.2 | ColumnibmLeServerXLesMaxLecID | read-write | mandatory | The maximum number on the LEC ID range in use by by this LES instance. The default value is 65279 the last possible LEC ID. |
| 1.3.6.1.4.1.2.5.8.4 | NodeibmLeClientX | |||
| 1.3.6.1.4.1.2.5.8.4.1 | NodeibmSuperELAN | |||
| 1.3.6.1.4.1.2.5.8.4.1.1 | TableibmSEPortStatisticsTable | not-accessible | mandatory | This table contains statistics about LAN Emulation Control Frame Statistics for Super ELAN Bridge ports. |
| 1.3.6.1.4.1.2.5.8.4.1.1.1 | RowibmSEPortStatisticsEntry | not-accessible | mandatory | A list of LE Control Frame statistical information for each SEB port |
| 1.3.6.1.4.1.2.5.8.4.1.1.1.1 | ColumnibmSEBridgeId | not-accessible | mandatory | The identifier of the Super ELAN Bridge which this LAN Emulation Client has joined. |
| 1.3.6.1.4.1.2.5.8.4.1.1.1.2 | ColumnibmSEPortNum | not-accessible | mandatory | The bridge port number associated with this Super ELAN Bridge LAN Emulation Client. This variable directly corresponds, is equal to, the dot1dBasePort variable… |
| 1.3.6.1.4.1.2.5.8.4.1.1.1.3 | ColumnibmSEPortArpRequestsIn | read-only | mandatory | The number of LE ARP Requests received by the SEB port. |
| 1.3.6.1.4.1.2.5.8.4.1.1.1.4 | ColumnibmSEPortArpRequestsOut | read-only | mandatory | The number of bridged LE ARP Requests transmitted by the SEB port. |
| 1.3.6.1.4.1.2.5.8.4.1.1.1.5 | ColumnibmSEArpRequestsErrors | read-only | mandatory | The number of received LE ARP Requests that were not bridged by the SEB port |
| 1.3.6.1.4.1.2.5.8.4.1.1.1.6 | ColumnibmSEPortArpRequestsDroppedPortBlocked | read-only | obsolete | The number of outgoing ARP Requests that were dropped by the SEB port because the port was in the blocking state. |
| 1.3.6.1.4.1.2.5.8.4.1.1.1.7 | ColumnibmSEPortArpRequestsFiltered | read-only | mandatory | The number of received LE ARP Requests discarded by the SEB port because the target MAC address in the LE ARP Request was filtered by the bridge. |
| 1.3.6.1.4.1.2.5.8.4.1.1.1.8 | ColumnibmSEPortArpRepliesIn | read-only | mandatory | The number of LE ARP Responses received by the SEB port. |
| 1.3.6.1.4.1.2.5.8.4.1.1.1.9 | ColumnibmSEPortArpRepliesOut | read-only | mandatory | The number of bridged LE ARP Responses transmitted by the SEB port. |
| 1.3.6.1.4.1.2.5.8.4.1.1.1.10 | ColumnibmSEPortArpRepliesErrors | read-only | mandatory | The number of received LE ARP Responses that were dropped by the SEB port because the SEB port originating the corresponding LE ARP Request could not be determ… |
| 1.3.6.1.4.1.2.5.8.4.1.1.1.11 | ColumnibmSEPortNarpRequestsIn | read-only | mandatory | The number of LE NARP Requests received by the SEB port. |
| 1.3.6.1.4.1.2.5.8.4.1.1.1.12 | ColumnibmSEPortNarpRequestsOut | read-only | mandatory | The number of bridged LE NARP Requests transmitted by the SEB port. |
| 1.3.6.1.4.1.2.5.8.4.1.1.1.13 | ColumnibmSEPortNarpRequestsDroppedPortBlocked | read-only | obsolete | The number of bridged LE NARP Requests that were dropped by the SEB port because the port was in the blocking state. |
| 1.3.6.1.4.1.2.5.8.4.1.1.1.14 | ColumnibmSEPortFlushRequestsIn | read-only | mandatory | The number of LE Flush Requests received by the SEB port. |
| 1.3.6.1.4.1.2.5.8.4.1.1.1.15 | ColumnibmSEPortFlushRequestsOut | read-only | mandatory | The number of bridged LE Flush Requests transmitted by the SEB port. |
| 1.3.6.1.4.1.2.5.8.4.1.1.1.16 | ColumnibmSEPortFlushRepliesIn | read-only | mandatory | The number of LE Flush Responses received by the SEB port. |
| 1.3.6.1.4.1.2.5.8.4.1.1.1.17 | ColumnibmSEPortFlushRepliesOut | read-only | mandatory | The number of bridged LE Flush Responses transmitted by the SEB port. |
| 1.3.6.1.4.1.2.5.8.4.1.1.1.18 | ColumnibmSEPortFlushRequestErrors | read-only | mandatory | The number of bridged LE Flush Request Errors for this SEB port. |
| 1.3.6.1.4.1.2.5.8.4.1.1.1.19 | ColumnibmSEPortFlushRepliesErrors | read-only | mandatory | The number of bridged LE Flush Replies Errors for this SEB port. |
| 1.3.6.1.4.1.2.5.8.4.1.1.1.20 | ColumnibmSEPortLeCtrlFramesIn | read-only | mandatory | The total number of LE Control frames received by the SEB port. |
| 1.3.6.1.4.1.2.5.8.4.1.1.1.21 | ColumnibmSEPortLeCtrlFramesOut | read-only | mandatory | The total number of LE Control frames transmitted by the SEB port. |
| 1.3.6.1.4.1.2.5.8.4.1.1.1.22 | ColumnibmSEPortLeCtrlFramesDiscSrcPortNotFwrd | read-only | mandatory | The total number of LE Control frames discarded because the SEB source port is not forwarding. |
| 1.3.6.1.4.1.2.5.8.4.1.1.1.23 | ColumnibmSEPortLeCtrlFramesDiscDestPortNotFwrd | read-only | mandatory | The total number of LE Control frames discarded because the SEB destination port is not forwarding. |
| 1.3.6.1.4.1.2.5.8.4.1.2 | TableibmSEBridgeConfigTable | not-accessible | mandatory | A table that contains the Super ELAN Bridge (SEB) Configuration. |
| 1.3.6.1.4.1.2.5.8.4.1.2.1 | RowibmSEBridgeConfigEntry | not-accessible | mandatory | The configuration information for each Super ELAN Bridge instance |
| 1.3.6.1.4.1.2.5.8.4.1.2.1.1 | ColumnibmSEAtmIfNumber | read-write | mandatory | The ATM interface number the Super ELAN (SE) bridging function is associated with. This number is used to determine the NETWORK ID. A SE Bridge (SEB) may span … |
| 1.3.6.1.4.1.2.5.8.4.1.2.1.2 | ColumnibmSEEnabled | read-write | mandatory | When enabled(1) the SE Bridge (SEB) will bridge frames to the ports defined in its bridging domain. When disabled(2) the SEB will not bridge frames. |
| 1.3.6.1.4.1.2.5.8.4.1.2.1.3 | ColumnibmSEName | read-write | mandatory | This is a user provided name to associate with the SEB. The SEB name is independent of the ELANs names of the constituent ELANs of the SEB. No default, name mu… |
| 1.3.6.1.4.1.2.5.8.4.1.2.1.4 | ColumnibmSEFrameSize | read-write | mandatory | Indicates the maximum SuperElan frame size. All ELANs in a single SEB must be set to the same maximum frame size. Valid Values 1516, 4544, 9234, 18190 Default … |
| 1.3.6.1.4.1.2.5.8.4.1.2.1.5 | ColumnibmSEMacCacheAge | read-write | mandatory | The number of seconds a learned MAC address remains in the data frame forwarding cache without revalidation. |
| 1.3.6.1.4.1.2.5.8.4.1.2.1.6 | ColumnibmSERDCacheAge | read-write | mandatory | The number of seconds a learned route descriptor remains in the data frame forwarding cache without revalidation. |
| 1.3.6.1.4.1.2.5.8.4.1.2.1.7 | ColumnibmSEPriority | read-write | mandatory | The SuperElan Bridge spanning tree priority. A lower value will increase the likelihood of a SuperElan bridge becoming the root. This value is appended to the … |
| 1.3.6.1.4.1.2.5.8.4.1.2.1.8 | ColumnibmSEMaxAge | read-write | mandatory | The age at which the current Spanning Tree configuration is deemed too old. A value to small may cause the spanning tree to unnecessarily reconfigure. A value … |
| 1.3.6.1.4.1.2.5.8.4.1.2.1.9 | ColumnibmSEBridgeHelloTime | read-write | mandatory | The interval of time in seconds between the generation of Spanning Tree configuration messages generate by the root. Lower values increase the spanning tree ro… |
| 1.3.6.1.4.1.2.5.8.4.1.2.1.10 | ColumnibmSEBridgeForwardDelay | read-write | mandatory | The delay in seconds that the SEB waits before transitioning to the next port state. The forward delay should be large enough to allow all Super ELAN bridges i… |
| 1.3.6.1.4.1.2.5.8.4.1.2.1.11 | ColumnibmSEBridgeAddress | read-write | mandatory | The Bridge MAC Address identifies the SuperELAN for the purposes of maintaining the SEB Spanning tree. If no value is configured, the SEB interface with the lo… |
| 1.3.6.1.4.1.2.5.8.4.1.2.1.12 | ColumnibmSEType | read-write | mandatory | This object indicates the type of SEB. sebEN(1) specifies a type of Ethernet, sebTR(2) specific's a type of Token Ring. |
| 1.3.6.1.4.1.2.5.8.4.1.2.1.13 | ColumnibmSEConfigRowStatus | read-write | mandatory | This object is used to create or delete entries (rows) in the SuperElan Bridge Configuration Table. |
| 1.3.6.1.4.1.2.5.8.4.1.3 | TableibmSEPortConfigTable | not-accessible | mandatory | A table that contains SuperELAN Bridge Port Configuration. |
| 1.3.6.1.4.1.2.5.8.4.1.3.1 | RowibmSEPortConfigEntry | not-accessible | mandatory | The configuration information for each SuperELAN Bridge Port |
| 1.3.6.1.4.1.2.5.8.4.1.3.1.1 | ColumnibmSEPortIfNumber | read-only | mandatory | The interface number associated with this port. |
| 1.3.6.1.4.1.2.5.8.4.1.3.1.2 | ColumnibmSEPortElanName | read-write | mandatory | The ELAN Name in which the SuperElan Bridge LEC participates. If the ELAN Name matches that of a LES/BUS on the same node, a SEB-LEC interface is automatically… |
| 1.3.6.1.4.1.2.5.8.4.1.3.1.3 | ColumnibmSEPortRemoteElan | read-write | mandatory | This object indicates whether or not the Super ELAN LE Services (LES/BUS) for the ELAN specified by ibmSEPortElanName are local to the same node as the port or… |
| 1.3.6.1.4.1.2.5.8.4.1.3.1.4 | ColumnibmSEPortEnabled | read-write | mandatory | When enabled(1) the SuperELAN will bridge frames through this SEB port. When disabled(2) the SuperELAN will not bridge frames through this port. |
| 1.3.6.1.4.1.2.5.8.4.1.3.1.5 | ColumnibmSEPortPriority | read-only | mandatory | This value influences which port is used when two or more ports are connected to the same network segment. This situation may cause a routing loop and a the pr… |
| 1.3.6.1.4.1.2.5.8.4.1.3.1.6 | ColumnibmSEPortRootCost | read-write | mandatory | The cost added to the root path cost in the Spanning Tree configuration message received on this port in order to determine the path cost to get to the root br… |
| 1.3.6.1.4.1.2.5.8.4.1.3.1.7 | ColumnibmSEPortRowStatus | read-write | mandatory | This object is used to create or delete entries (rows) in the SuperElan Bridge Port Configuration Table. |
| 1.3.6.1.4.1.2.5.8.4.1.4 | TableibmSEBridgeTable | not-accessible | mandatory | A table that contains bridge information for the SEB. |
| 1.3.6.1.4.1.2.5.8.4.1.4.1 | RowibmSEBridgeEntry | not-accessible | mandatory | Each entry (row) contains additional SEB pertaining to a specific SEB instance. |
| 1.3.6.1.4.1.2.5.8.4.1.4.1.1 | ColumnibmSENumPorts | read-only | mandatory | The number of ports defined for this SEB. This number can be used to determine the next available port number for row creation in any of the SEB Port Tables. O… |
| 1.3.6.1.4.1.2.5.8.4.1.4.1.2 | ColumnibmSEProtocolSpecification | read-only | mandatory | The protocol type used for this SEB. Currently only Transparent Bridging with Source Route Awareness (tbSra(2)) is the only defined protocol type for SEB's. |
| 1.3.6.1.4.1.2.5.8.4.1.4.1.3 | ColumnibmSETimeSinceTopologyChange | read-only | mandatory | The time (in hundredths of a second) since the last time a topology change was detected by the bridge entity. |
| 1.3.6.1.4.1.2.5.8.4.1.4.1.4 | ColumnibmSETopChanges | read-only | mandatory | The total number of topology changes detected by this bridge since the management entity was last reset or initialized. |
| 1.3.6.1.4.1.2.5.8.4.1.4.1.5 | ColumnibmSEDesignatedRoot | read-only | mandatory | The bridge identifier of the root of the spanning tree as determined by the Spanning Tree Protocol as executed by this node. This value is used as the Root Ide… |
| 1.3.6.1.4.1.2.5.8.4.1.4.1.6 | ColumnibmSERootCost | read-only | mandatory | The cost of the path to the root as seen from this bridge. |
| 1.3.6.1.4.1.2.5.8.4.1.4.1.7 | ColumnibmSERootPort | read-only | mandatory | The port number of the port which offers the lowest cost path from this bridge to the root bridge. |
| 1.3.6.1.4.1.2.5.8.4.1.4.1.8 | ColumnibmSEBridgeMaxAge | read-only | mandatory | The maximum age of Spanning Tree Protocol information learned from the network on any port before it is discarded, in units of hundredths of a second. This is … |
| 1.3.6.1.4.1.2.5.8.4.1.4.1.9 | ColumnibmSEHelloTime | read-only | mandatory | The amount of time between the transmission of Configuration bridge PDUs by this node on any port when it is the root of the spanning tree or trying to become … |
| 1.3.6.1.4.1.2.5.8.4.1.4.1.10 | ColumnibmSEHoldTime | read-only | mandatory | This time value determines the interval length during which no more than two Configuration bridge PDUs shall be transmitted by this node, in units of hundredth… |
| 1.3.6.1.4.1.2.5.8.4.1.4.1.11 | ColumnibmSEForwardDelay | read-only | mandatory | This time value, measured in units of hundredths of a second, controls how fast a port changes its spanning state when moving towards the Forwarding state. The… |
| 1.3.6.1.4.1.2.5.8.4.1.4.1.12 | ColumnibmSEMacLearnedEntryDiscards | read-only | mandatory | The total number of Mac Forwarding Database entries, which have been or would have been learnt, but have been discarded due to a lack of space to store them in… |
| 1.3.6.1.4.1.2.5.8.4.1.4.1.13 | ColumnibmSERDLearnedEntryDiscards | read-only | mandatory | The total number of Route Descriptor Forwarding Database entries, which have been or would have been learnt, but have been discarded due to a lack of space to … |
| 1.3.6.1.4.1.2.5.8.4.1.5 | TableibmSEStpPortTable | not-accessible | mandatory | A table that contains port-specific information and Spanning Tree Protocol information for each SEB Port. |
| 1.3.6.1.4.1.2.5.8.4.1.5.1 | RowibmSEStpPortEntry | not-accessible | mandatory | A list of SEB information maintained for each SEB port. |
| 1.3.6.1.4.1.2.5.8.4.1.5.1.1 | ColumnibmSEStpPortState | read-only | mandatory | The port's current state as defined by application of the Spanning Tree Protocol. This state controls what action a port takes on reception of a frame. If the … |
| 1.3.6.1.4.1.2.5.8.4.1.5.1.2 | ColumnibmSEStpPortDesignatedRoot | read-only | mandatory | The unique Bridge Identifier of the Bridge recorded as the Root in the Configuration BPDUs transmitted by the Designated Bridge for the segment to which the po… |
| 1.3.6.1.4.1.2.5.8.4.1.5.1.3 | ColumnibmSEStpPortDesignatedCost | read-only | mandatory | The path cost of the Designated Port of the segment connected to this port. This value is compared to the Root Path Cost field in received bridge PDUs. |
| 1.3.6.1.4.1.2.5.8.4.1.5.1.4 | ColumnibmSEStpPortDesignatedBridge | read-only | mandatory | The Bridge Identifier of the bridge which this port considers to be the Designated Bridge for this port's segment. |
| 1.3.6.1.4.1.2.5.8.4.1.5.1.5 | ColumnibmSEStpPortDesignatedPort | read-only | mandatory | The Port Identifier of the port on the Designated Bridge for this port's segment. |
| 1.3.6.1.4.1.2.5.8.4.1.5.1.6 | ColumnibmSEStpPortForwardTransitions | read-only | mandatory | The number of times this port has transitioned from the Learning state to the Forwarding state. |
| 1.3.6.1.4.1.2.5.8.4.1.5.1.7 | ColumnibmSEPortMaxInfo | read-only | mandatory | The maximum size of the INFO (non-MAC) field that this port will receive or transmit. |
| 1.3.6.1.4.1.2.5.8.4.1.8 | TableibmSEPortDataStatisticsTable | not-accessible | mandatory | This table contains statistics about LAN Emulation Data Frame Statistics for Super ELAN Bridge ports. |
| 1.3.6.1.4.1.2.5.8.4.1.8.1 | RowibmSEPortDataStatisticsEntry | not-accessible | mandatory | A list of LE Data Frame statistical information for each SEB port |
| 1.3.6.1.4.1.2.5.8.4.1.8.1.1 | ColumnibmSEPortInFrames | read-only | mandatory | The number of frames that have been received by this port from its segment. Note that a frame received on the interface corresponding to this port is only coun… |
| 1.3.6.1.4.1.2.5.8.4.1.8.1.2 | ColumnibmSEPortOutFrames | read-only | mandatory | The number of frames that have been transmitted by this port to its segment. Note that a frame transmitted on the interface corresponding to this port is only … |
| 1.3.6.1.4.1.2.5.8.4.1.8.1.3 | ColumnibmSEPortRoutedInFrames | read-only | mandatory | Frames received on this port that were routed, rather than, or in addition to, bridged. |
| 1.3.6.1.4.1.2.5.8.4.1.8.1.4 | ColumnibmSEPortBpduFrames | read-only | mandatory | Count of SE BPDU Frames |
| 1.3.6.1.4.1.2.5.8.4.1.8.1.5 | ColumnibmSEPortInDiscards | read-only | mandatory | Count of valid frames received which were discarded (i.e., filtered) by the Forwarding Process. |
| 1.3.6.1.4.1.2.5.8.4.1.8.1.6 | ColumnibmSEPortDropSrcAddrFilters | read-only | mandatory | Frames dropped due to Source Address filtering |
| 1.3.6.1.4.1.2.5.8.4.1.8.1.7 | ColumnibmSEPortDropDestAddrFilters | read-only | mandatory | Frames dropped due to destination address filtering. These are frames to destinations on the same LAN that they arrived on, or otherwise filtered by the filter… |
| 1.3.6.1.4.1.2.5.8.4.1.8.1.8 | ColumnibmSEPortDropProtocolFilters | read-only | mandatory | Frames dropped due to user filtering of particular protocol identifiers. |
| 1.3.6.1.4.1.2.5.8.4.1.8.1.9 | ColumnibmSEPortDropSrcNotFwds | read-only | mandatory | Frames received on this port when it was not in forwarding state (mostly in learning state). |
| 1.3.6.1.4.1.2.5.8.4.1.8.1.10 | ColumnibmSEPortDropDestNotFwds | read-only | mandatory | Frames not sent because output port not in forwarding state. Don't know which port they tag on yet. |
| 1.3.6.1.4.1.2.5.8.4.1.8.1.11 | ColumnibmSEPortDropInputOverflows | read-only | mandatory | Frames dropped due to input queue overflow. |
| 1.3.6.1.4.1.2.5.8.4.1.8.1.12 | ColumnibmSEPortDropBpduOverflows | read-only | mandatory | BPDU's dropped due to BPDU input queue overflow. |
| 1.3.6.1.4.1.2.5.8.4.1.8.1.13 | ColumnibmSEPortDropSrOverflows | read-only | mandatory | Source Route Frames dropped due to SR input queue overflow. |
| 1.3.6.1.4.1.2.5.8.4.1.8.1.14 | ColumnibmSEPortRecNoBuffFailures | read-only | mandatory | Receive frames discarded due to no buffer available. |
| 1.3.6.1.4.1.2.5.8.4.1.8.1.15 | ColumnibmSEPortTransmitFailures | read-only | mandatory | Frame Count of transmit failures. |
| 1.3.6.1.4.1.2.5.8.4.1.8.1.16 | ColumnibmSEPortToBigFailures | read-only | mandatory | Count of frames to big to sent on this port. |
| 1.3.6.1.4.1.2.5.8.4.1.8.1.17 | ColumnibmSEPortLanIdFailures | read-only | mandatory | Count of frames discarded due to mismatch in the LAN ID. |
| 1.3.6.1.4.1.2.5.8.4.1.8.1.18 | ColumnibmSEPortStpLanIdFailures | read-only | mandatory | Count of frames discarded due to duplicate LAN ID or spanning tree error. |
| 1.3.6.1.4.1.2.5.8.4.2 | NodeibmBbcmMIB | |||
| 1.3.6.1.4.1.2.5.8.4.2.1 | NodeibmBbcmConfigGroup | |||
| 1.3.6.1.4.1.2.5.8.4.2.1.1 | ScalaribmBbcmConfigNextId | read-only | obsolete | The next available index in the ibmBbcmConfigTable. The value of this object can be used as the index by the network manager to create an entry in the table. T… |
| 1.3.6.1.4.1.2.5.8.4.2.1.2 | TableibmBbcmConfigTable | not-accessible | mandatory | This table contains configuration values for the Bridging Broadcast Manager (BBCM). |
| 1.3.6.1.4.1.2.5.8.4.2.1.2.1 | RowibmBbcmConfigEntry | not-accessible | mandatory | Each entry of the table represents a configured instance of the BBCM. |
| 1.3.6.1.4.1.2.5.8.4.2.1.2.1.1 | ColumnibmBbcmConfigIndex | not-accessible | mandatory | A value which uniquely identifies a conceptual row of the BBCM Configuration Table. Since BBCM is a bridge based function, each row of this table identifies a … |
| 1.3.6.1.4.1.2.5.8.4.2.1.2.1.2 | ColumnibmBbcmName | read-only | mandatory | This is the name associated with the bridge instance. It is either the Super Elan Bridge name or the name assigned to the base bridge. |
| 1.3.6.1.4.1.2.5.8.4.2.1.2.1.3 | ColumnibmBbcmConfigRowStatus | read-write | mandatory | This object is used to create or delete entries in the ibmBbcmConfigTable. |
| 1.3.6.1.4.1.2.5.8.4.2.1.3 | TableibmBbcmProtocolConfigTable | not-accessible | mandatory | Each entry of the table represents a configured instance of a specific protocol for a particular BBCM instance. |
| 1.3.6.1.4.1.2.5.8.4.2.1.3.1 | RowibmBbcmProtocolConfigEntry | not-accessible | mandatory | Each entry of the table represents a configuration information for a specific protocol supported by a specific BBCM. |
| 1.3.6.1.4.1.2.5.8.4.2.1.3.1.1 | ColumnibmBbcmProtocolType | not-accessible | mandatory | BBCM Protocols Supported. For ease in implementation the enumerated types for ibmBbcmProtocolType and ibmBbcmStatProtocolType are equivalent. Note: 1 is reserv… |
| 1.3.6.1.4.1.2.5.8.4.2.1.3.1.2 | ColumnibmBbcmProtocolOperStatus | read-only | mandatory | The current BBCM Status Note for this implementation other is defined only to be consistent with standard LE server MIBs, it has no meaning for the definition. |
| 1.3.6.1.4.1.2.5.8.4.2.1.3.1.3 | ColumnibmBbcmProtocolAdminStatus | read-write | mandatory | The desired state of the BBCM as prescribed by the operator. The actions of the agent will, if at all possible, eventually result in the desired state being re… |
| 1.3.6.1.4.1.2.5.8.4.2.1.3.1.4 | ColumnibmBbcmProtocolCacheAge | read-write | mandatory | The number of minutes a protocol is cached by BBCM before being added due to inactivity. |
| 1.3.6.1.4.1.2.5.8.4.2.2 | NodeibmBbcmStatsGroup | |||
| 1.3.6.1.4.1.2.5.8.4.2.2.1 | TableibmBbcmStatTable | not-accessible | mandatory | This table contains activity statistics on a BBCM basis. |
| 1.3.6.1.4.1.2.5.8.4.2.2.1.1 | RowibmBbcmStatEntry | not-accessible | mandatory | Each entry of the tables represents a BBCM protocol instance. |
| 1.3.6.1.4.1.2.5.8.4.2.2.1.1.1 | ColumnibmBbcmStatProtocolType | not-accessible | mandatory | BBCM Protocols Supported. For ease in implementation the enumerated types for ibmBbcmProtocolType and ibmBbcmStatProtocolType are equivalent. When the protocol… |
| 1.3.6.1.4.1.2.5.8.4.2.2.1.1.2 | ColumnibmBbcmStatInReceives | read-only | mandatory | Number of packets processed by BBCM for this protocol |
| 1.3.6.1.4.1.2.5.8.4.2.2.1.1.3 | ColumnibmBbcmStatInOctets | read-only | mandatory | Number of Octets processed by BBCM for this protocol. This count is of all octets seen, including control information like headers. |
| 1.3.6.1.4.1.2.5.8.4.2.2.1.1.4 | ColumnibmBbcmStatOutManaged | read-only | mandatory | Number of packets transformed by BBCM from broadcast to unicast for this protocol. |
| 1.3.6.1.4.1.2.5.8.4.2.2.1.1.5 | ColumnibmBbcmStatOutManagedOctets | read-only | mandatory | Number of Octets transformed by BBCM from broadcast to unicast for this protocol. This count is of all octets seen, including control information like headers. |
| 1.3.6.1.4.1.2.5.8.4.2.2.1.1.6 | ColumnibmBbcmStatOutNotManaged | read-only | mandatory | The number of packets seen by BBCM that were left as they were originally broadcast. |
| 1.3.6.1.4.1.2.5.8.4.2.2.1.1.7 | ColumnibmBbcmStatOutNotManagedOctets | read-only | mandatory | The number of octets seen by BBCM that were left as they were originally broadcast. This count is of all octets seen, including control information like header… |
| 1.3.6.1.4.1.2.5.8.4.2.2.1.1.8 | ColumnibmBbcmStatOutFiltered | read-only | mandatory | Number of Packets Filtered by BBCM. |
| 1.3.6.1.4.1.2.5.8.4.2.2.1.1.9 | ColumnibmBbcmStatOutFilteredOctets | read-only | mandatory | Number of Octets Filtered by BBCM. |
| 1.3.6.1.4.1.2.5.8.4.3 | NodeibmVlan | |||
| 1.3.6.1.4.1.2.5.8.4.3.1 | NodeibmVlanGGroup | |||
| 1.3.6.1.4.1.2.5.8.4.3.1.1 | NodeibmVlanGOGroup | |||
| 1.3.6.1.4.1.2.5.8.4.3.1.1.1 | ScalaribmVlanConfIndexNextID | read-only | mandatory | This is the next available Vlan Index for this agent. If should be used when creating rows in the Vlan tables indexed by ibmVlanConfIndex. |
| 1.3.6.1.4.1.2.5.8.4.3.1.1.2 | ScalaribmVlanTopologyChange | read-only | mandatory | This is the time stamp at which time the last VLAN Topology Change occurred. This object can be used to monitor the change status of the VLANs controlled by th… |
| 1.3.6.1.4.1.2.5.8.4.3.1.1.3 | ScalaribmVlanMaxPortMap | read-only | mandatory | This is the maximum number of octets this agent supports for representing ports in the the Port Map objects which use the textual convention IbmVlanPortMap. |
| 1.3.6.1.4.1.2.5.8.4.3.1.1.4 | ScalaribmVlanMaxUDSWMaskFilter | read-only | mandatory | This is the maximum number of octets this agent supports for ibmVlanUDSWMask or ibmVlanUDSWFilter. The Mask and Filter must contain the same number of octets. |
| 1.3.6.1.4.1.2.5.8.4.3.2 | NodeibmVlanCGroup | |||
| 1.3.6.1.4.1.2.5.8.4.3.2.1 | NodeibmVlanConfGroup | |||
| 1.3.6.1.4.1.2.5.8.4.3.2.1.1 | TableibmVlanConfTable | not-accessible | mandatory | The layout of the VLAN MIB tables relies on common information and VLAN type specific information. The ibmVlanConfTable is the base table. Columns are added to… |
| 1.3.6.1.4.1.2.5.8.4.3.2.1.1.1 | RowibmVlanConfEntry | not-accessible | mandatory | Each entry of the ibmVlanConfTable provides configuration information pertaining to a specific instance of a VLAN. |
| 1.3.6.1.4.1.2.5.8.4.3.2.1.1.1.1 | ColumnibmVlanConfIndex | not-accessible | mandatory | An index assigned by the agent which uniquely identifies an instance of a VLAN. This objects value is NOT guaranteed to be the same value across agent restarts. |
| 1.3.6.1.4.1.2.5.8.4.3.2.1.1.1.2 | ColumnibmVlanConfBridgeId | read-write | mandatory | The identifier of the Base Bridge or Super ELAN Bridge which this VLAN is defined as an additional filter for. |
| 1.3.6.1.4.1.2.5.8.4.3.2.1.1.1.3 | ColumnibmVlanConfType | read-write | mandatory | The type of VLAN. |
| 1.3.6.1.4.1.2.5.8.4.3.2.1.1.1.4 | ColumnibmVlanConfAgingTimer | read-write | mandatory | The amount of time (in minutes) an auto-detect port will remain in the forwarding domain of the VLAN in the absence of traffic from that VLAN. A value of zero … |
| 1.3.6.1.4.1.2.5.8.4.3.2.1.1.1.5 | ColumnibmVlanConfForwardingPortMap | read-only | mandatory | Defines which ports are in forwarding state for this VLAN. The VLAN port is in forwarding state if one of the following is true: The port has been statically i… |
| 1.3.6.1.4.1.2.5.8.4.3.2.1.1.1.6 | ColumnibmVlanConfIncludedPortMap | read-write | mandatory | Each of the bits in the port map represents a bridge port and defines which ports are automatically and permanently included from the forwarding domain of the … |
| 1.3.6.1.4.1.2.5.8.4.3.2.1.1.1.7 | ColumnibmVlanConfExcludedPortMap | read-write | mandatory | Each of the bits in the port map represents a bridge port and defines which ports are automatically and permanently excluded from the forwarding domain of the … |
| 1.3.6.1.4.1.2.5.8.4.3.2.1.1.1.8 | ColumnibmVlanConfName | read-write | mandatory | A node unique user defined name for the VLAN. This name must be unique across all bridge instances at that node (agent). |
| 1.3.6.1.4.1.2.5.8.4.3.2.1.1.1.9 | ColumnibmVlanConfRowStatus | read-write | mandatory | This object is used to create or delete entries (rows) in the VLAN Configuration Table. |
| 1.3.6.1.4.1.2.5.8.4.3.2.1.2 | TableibmVlanIpConfTable | not-accessible | mandatory | The IBM VLAN Configuration Table provides the definitions required to configure an IBM IP or IP Multicast Protocol Virtual LAN (PVLAN) This table defines the f… |
| 1.3.6.1.4.1.2.5.8.4.3.2.1.2.1 | RowibmVlanIpConfEntry | not-accessible | mandatory | Each entry of the ibmVlanIpConfTable provides configuration information pertaining to a specific instance of an IP or IP Multicast PVLAN. |
| 1.3.6.1.4.1.2.5.8.4.3.2.1.2.1.1 | ColumnibmVlanIpNetworkAddr | read-write | mandatory | The IP or IP Multicast address of the local forwarding component used to route or bridge traffic for this VLAN. No default value. A default value must be speci… |
| 1.3.6.1.4.1.2.5.8.4.3.2.1.2.1.2 | ColumnibmVlanIpNetworkMask | read-write | mandatory | The IP address mask used to 'AND' against the IP address in a received IP frame. The result of the 'AND' operation is compared to the value given in the ibmVla… |
| 1.3.6.1.4.1.2.5.8.4.3.2.1.2.1.3 | ColumnibmVlanIpCutThruFromHere | read-write | mandatory | Specifies whether IP cut through communications originating from this subnet are enabled. |
| 1.3.6.1.4.1.2.5.8.4.3.2.1.2.1.4 | ColumnibmVlanIpCutThruToHere | read-write | mandatory | Specifies whether IP cut through communications destined for this subnet are enabled. |
| 1.3.6.1.4.1.2.5.8.4.3.2.1.3 | TableibmVlanIpxConfTable | not-accessible | mandatory | The IBM IPX VLAN Configuration Table provides the definitions required to configure an IBM IPX Protocol Virtual LAN (PVLAN). This table defines the filters for… |
| 1.3.6.1.4.1.2.5.8.4.3.2.1.3.1 | RowibmVlanIpxConfEntry | not-accessible | mandatory | Each entry of the ibmVlanIpxConfTable provides configuration information pertaining to a specific instance of an IPX PVLAN. |
| 1.3.6.1.4.1.2.5.8.4.3.2.1.3.1.1 | ColumnibmVlanIpxNetworkAddr | read-write | mandatory | This is the VLANs IPX Network Address. No Default Value, one must be specified when creating an IPX PVLAN in the ibmVlanConfTable. |
| 1.3.6.1.4.1.2.5.8.4.3.2.1.4 | TableibmVlanUDSWConfTable | not-accessible | mandatory | This table defines a 'sliding window' mechanism for the definition of 'policy' or 'user' defined VLANs. The mechanism is based on a set of mask and filter fiel… |
| 1.3.6.1.4.1.2.5.8.4.3.2.1.4.1 | RowibmVlanUDSWConfEntry | not-accessible | mandatory | Each entry of the ibmVlanUDSWConfTable provides configuration information pertaining to a specific instance of an UDSW VLAN. Entries in this table must be prov… |
| 1.3.6.1.4.1.2.5.8.4.3.2.1.4.1.1 | ColumnibmVlanUDSWOffsetType | read-write | mandatory | This object specifies the base location in the traffic frame where the ibmVlanUDSWOffset will be used to start the comparison with the ibmVlanUDSWFilter value … |
| 1.3.6.1.4.1.2.5.8.4.3.2.1.4.1.2 | ColumnibmVlanUDSWOffset | read-write | mandatory | This object determines the starting location in the traffic frame that will be used in the comparison with the ibmVlanUDSWFilter value to determine if this fra… |
| 1.3.6.1.4.1.2.5.8.4.3.2.1.4.1.3 | ColumnibmVlanUDSWMask | read-write | mandatory | This object determines the size and bit pattern that is compared to the traffic frame at the location specified by the offset type and starting at the offset l… |
| 1.3.6.1.4.1.2.5.8.4.3.2.1.4.1.4 | ColumnibmVlanUDSWFilter | read-write | mandatory | This object determines the size and bit pattern that is compared to the result after the mask being applied to the traffic frame at the location specified by t… |
| 1.3.6.1.4.1.2.5.8.4.3.2.1.5 | TableibmVlanMacConfTable | not-accessible | mandatory | The IBM MAC VLAN Configuration Table provides the definitions required to configure an IBM MAC Virtual LAN (VLAN). This table defines the filters for the IBM M… |
| 1.3.6.1.4.1.2.5.8.4.3.2.1.5.1 | RowibmVlanMacConfEntry | not-accessible | mandatory | Each entry of the ibmVlanMacConfTable provides configuration information pertaining to a specific instance of a MAC VLAN. |
| 1.3.6.1.4.1.2.5.8.4.3.2.1.5.1.1 | ColumnibmVlanMacAddrIndex | not-accessible | mandatory | The MAC address index being used as a filter for this MAC address VLAN. |
| 1.3.6.1.4.1.2.5.8.4.3.2.1.5.1.2 | ColumnibmVlanMacAddresses | read-write | mandatory | A string of Source MAC addresses being used as a filter for this MAC address VLAN. |
| 1.3.6.1.4.1.2.5.8.4.3.2.1.5.1.3 | ColumnibmVlanMacAddrConfRowStatus | read-write | mandatory | This object is used to create or delete entries (rows) in the MAC Address Configuration Table. |
| 1.3.6.1.4.1.2.5.8.4.3.3 | NodeibmVlanStatusGroup | |||
| 1.3.6.1.4.1.2.5.8.4.3.3.1 | TableibmVlanStatusTable | not-accessible | mandatory | The IBM VLAN Status Table provides the administration and statistics for an IBM Virtual LAN (VLAN). |
| 1.3.6.1.4.1.2.5.8.4.3.3.1.1 | RowibmVlanStatusEntry | not-accessible | mandatory | Each entry in the ibmVlanStatusTable augments a specific instance of an IP VLAN. |
| 1.3.6.1.4.1.2.5.8.4.3.3.1.1.1 | ColumnibmVlanOperStatus | read-only | mandatory | Current state of the VLAN |
| 1.3.6.1.4.1.2.5.8.4.3.3.1.1.2 | ColumnibmVlanAdminStatus | read-write | mandatory | Desired state of the VLAN. This change becomes immediate on completion of the set operation and does not require system restart. |
| 1.3.6.1.4.1.2.5.8.4.3.3.1.1.3 | ColumnibmVlanProcessedPackets | read-only | mandatory | The number of Broadcast/Multicast packets received by this VLAN. |
| 1.3.6.1.4.1.2.5.8.4.3.3.1.1.4 | ColumnibmVlanDiscardedPackets | read-only | mandatory | The number of Broadcast packets discarded by this VLAN because the source VLAN was excluded on the port. |
| 1.3.6.1.4.1.2.5.8.4.3.3.1.1.5 | ColumnibmVlanDiscPktsMac | read-write | mandatory | The object contains the Source MAC address from the last packet that was discarded because the source VLAN was excluded on the port. This will aid in finding t… |
| 1.3.6.1.4.1.2.5.8.4.3.3.2 | TableibmVlanIpStatusTable | not-accessible | mandatory | The IBM IP VLAN Status Table provides the administration and statistics for an IBM IP Protocol Virtual LAN (PVLAN). |
| 1.3.6.1.4.1.2.5.8.4.3.3.2.1 | RowibmVlanIpStatusEntry | not-accessible | mandatory | Each entry in the ibmVlanIpStatusTable augments a specific instance of an IP PVLAN. |
| 1.3.6.1.4.1.2.5.8.4.3.3.2.1.1 | ColumnibmVlanIpCutThruFromPkts | read-only | mandatory | The number of Broadcast/Multicast packets cutThru from this VLAN. |
| 1.3.6.1.4.1.2.5.8.4.3.3.2.1.2 | ColumnibmVlanIpCutThruToPkts | read-only | mandatory | The number of Broadcast/Multicast packets received to this VLAN. |
| 1.3.6.1.4.1.2.5.8.4.3.3.2.1.3 | ColumnibmVlanIpCutThruFromDiscPkts | read-only | mandatory | The number of Broadcast/Multicast packets discarded because cutThru from this VLAN was disabled. |
| 1.3.6.1.4.1.2.5.8.4.3.3.2.1.4 | ColumnibmVlanIpCutThruToDiscPkts | read-only | mandatory | The number of Broadcast/Multicast packets discarded before it is forwarded because cutThru to this VLAN was disabled. |
| 1.3.6.1.4.1.2.5.8.5 | NodeibmLeMIBConformance | |||
| 1.3.6.1.4.1.2.5.8.5.1 | NodeibmLeMIBGroups | |||
| 1.3.6.1.4.1.2.5.8.5.1.1 | NodeibmLeCServerXMonLECSGroup | |||
| 1.3.6.1.4.1.2.5.8.5.1.2 | NodeibmLeCServerXMonLESGroup | |||
| 1.3.6.1.4.1.2.5.8.5.1.3 | NodeibmLeCServerXMonBUSGroup | |||
| 1.3.6.1.4.1.2.5.8.5.1.4 | NodeibmCSuperELANGroup | |||
| 1.3.6.1.4.1.2.5.8.5.1.5 | NodeibmCBbcmMIBGroup | |||
| 1.3.6.1.4.1.2.5.8.5.1.6 | NodeibmCVlanMIBGroup | |||
| 1.3.6.1.4.1.2.5.8.5.2 | NodeibmLeMIBCompliances | |||
| 1.3.6.1.4.1.2.5.8.5.2.1 | NodeibmLeMIBCompliance |