MIB Viewer

LAN-EMULATION-ELAN-MIB

112 objects
No module-level DESCRIPTION found.
Imported Objects
LAN-EMULATION-CLIENT-MIB-- AtmLaneAddress atmfLanEmulation VciInteger VpiInteger
RFC-1212OBJECT-TYPE
RFC1155-SMI-- enterprises -- Counter
RFC1213-MIBDisplayString
SNMPv2-CONF-- MODULE-COMPLIANCE OBJECT-GROUP --
SNMPv2-SMI-- Counter32 -- MODULE-IDENTITY Integer32 --
SNMPv2-TC-- AutonomousType -- RowStatus -- TEXTUAL-CONVENTION MacAddress TimeStamp --
OIDNameAccessStatusDescription
1.3.6.1.4.1.353.5.3.2NodeelanMIB
1.3.6.1.4.1.353.5.3.2.1NodeelanAdminGroup
1.3.6.1.4.1.353.5.3.2.1.1NodeelanAdminPolicyVal
1.3.6.1.4.1.353.5.3.2.1.1.1NodebyAtmAddr
1.3.6.1.4.1.353.5.3.2.1.1.2NodebyMacAddr
1.3.6.1.4.1.353.5.3.2.1.1.3NodebyRouteDescriptor
1.3.6.1.4.1.353.5.3.2.1.1.4NodebyLanType
1.3.6.1.4.1.353.5.3.2.1.1.5NodebyPktSize
1.3.6.1.4.1.353.5.3.2.1.1.6NodebyElanName
1.3.6.1.4.1.353.5.3.2.2NodeelanConfGroup
1.3.6.1.4.1.353.5.3.2.2.1ScalarelanConfNextIdread-onlymandatoryThe next available ELAN index provided by the agent. The value of this object can be used as the index to the elanConfTable during creation.
1.3.6.1.4.1.353.5.3.2.2.2TableelanConfTablenot-accessiblemandatoryThis table contains all Emulated LANs (ELANs) this agent manages. An ELAN is defined by the ELAN name, a set of TLVs, and other parameters. After an ELAN is cr…
1.3.6.1.4.1.353.5.3.2.2.2.1RowelanConfEntrynot-accessiblemandatoryEach entry in this table represents an Emulated LAN. Objects elanConfIndex and elanConfRowStatus are required during row creation and deletion.
1.3.6.1.4.1.353.5.3.2.2.2.1.1ColumnelanConfIndexnot-accessiblemandatoryA value which uniquely identifies a conceptual row in the elanConfTable. If the conceptual row identified by this value of elanConfIndex is recreated following…
1.3.6.1.4.1.353.5.3.2.2.2.1.2ColumnelanConfNameread-writemandatoryThe name of this Emulated LAN entry. When this object length is zero then the ELAN name is not specified. The clients assigned to this ELAN will also have a ze…
1.3.6.1.4.1.353.5.3.2.2.2.1.3ColumnelanConfTlvIndexread-writemandatoryThe value of this object identifies one or more rows in the lecsTlvTable which applies to this ELAN. This object is set to zero if 1) LECS is not supported. or…
1.3.6.1.4.1.353.5.3.2.2.2.1.4ColumnelanConfLanTyperead-writemandatoryThe LAN type of this ELAN entry.
1.3.6.1.4.1.353.5.3.2.2.2.1.5ColumnelanConfMaxFrameSizeread-writemandatoryThe maximum data frame size of this ELAN entry. The maximum AAL-5 SDU size of a data frame that this ELAN can support. The value of this object is returned to …
1.3.6.1.4.1.353.5.3.2.2.2.1.6ColumnelanConfRowStatusread-writemandatoryThis object is used to create or delete entries in the elanConfTable.
1.3.6.1.4.1.353.5.3.2.2.3TableelanLesTablenot-accessiblemandatoryThis table contains all LESs for each ELAN specified in the elanConfTable. Each ELAN can have more than one LES providing LAN Emulation services. Each LES can …
1.3.6.1.4.1.353.5.3.2.2.3.1RowelanLesEntrynot-accessiblemandatoryEach entry in this table represents a LES/Emulated LAN pair. Object elanLesAtmAddress besides elanLesRowStatus is also required during row creation.
1.3.6.1.4.1.353.5.3.2.2.3.1.1ColumnelanLesIndexnot-accessiblemandatoryAn arbitrary number which uniquely identifies the LES this entry pertains to.
1.3.6.1.4.1.353.5.3.2.2.3.1.2ColumnelanLesAtmAddressread-writemandatoryThe ATM address of the LES entry. If LECS is supported, the value of this object is the LES ATM address LECS returns to the LEC in the CONFIGURE response. If L…
1.3.6.1.4.1.353.5.3.2.2.3.1.3ColumnelanLesRowStatusread-writemandatoryThis object is used to create or delete entries in the elanLesfTable.
1.3.6.1.4.1.353.5.3.2.2.4TableelanPolicyTablenot-accessiblemandatoryThis table contains all policies this agent supports for assigning a LEC to an ELAN. A set of policies with the same or different priorities can be selected by…
1.3.6.1.4.1.353.5.3.2.2.4.1RowelanPolicyEntrynot-accessiblemandatoryEach entry in this table represents a policy supported by the entity which provides ELAN configuration services. Each policy can be used to evaluate the CONFIG…
1.3.6.1.4.1.353.5.3.2.2.4.1.1ColumnelanPolicySelectorIndexnot-accessiblemandatoryThe value of this object indicates a group of policies that can be selected by the ELAN configuration service provider such as the LECS.
1.3.6.1.4.1.353.5.3.2.2.4.1.2ColumnelanPolicyIndexnot-accessiblemandatoryThe value of this object uniquely identifies a single policy entry in this table.
1.3.6.1.4.1.353.5.3.2.2.4.1.3ColumnelanPolicyPriorityread-writemandatoryThe priority of this policy entry. Policies are evaluated by the entity which provides ELAN configuration service (LECS) by their priorities. Policies with the…
1.3.6.1.4.1.353.5.3.2.2.4.1.4ColumnelanPolicyTyperead-writemandatoryThe value of this object must reference a definition of a type of policy. Some of such definition exist within the elanAdminPolicyVal subtree. Others may be de…
1.3.6.1.4.1.353.5.3.2.2.4.1.5ColumnelanPolicyRowStatusread-writemandatoryThis object is used to create or delete entries in the elanPolicyTable.
1.3.6.1.4.1.353.5.3.2.2.5TableelanLecAtmAddrTablenot-accessiblemandatoryThis table is used to assign a LEC to an ELAN by ATM address. When the by ATM address policy is used, this table is used to specify the LEC's ATM address or po…
1.3.6.1.4.1.353.5.3.2.2.5.1RowelanLecAtmAddrEntrynot-accessiblemandatoryEach entry represents a LEC to ELAN binding.
1.3.6.1.4.1.353.5.3.2.2.5.1.1ColumnelanLecAtmAddressnot-accessiblemandatoryThe value of this object is the ATM address of a LAN Emulation client. This object and the object elanLecAtmMask are used to form an ATM address or portion of …
1.3.6.1.4.1.353.5.3.2.2.5.1.2ColumnelanLecAtmMasknot-accessiblemandatoryThe ATM address mask associated with the object elanLecAtmAddress. The value of the mask is an ATM address with the don't care portion set to zero and the vali…
1.3.6.1.4.1.353.5.3.2.2.5.1.4ColumnelanLecAtmRowStatusread-writemandatoryThis object is used to create or destroy entries in this table.
1.3.6.1.4.1.353.5.3.2.2.6TableelanLecMacAddrTablenot-accessiblemandatoryThis table is used to assign a LEC to an ELAN by MAC address. When the byMacAddress policy is used, this table is used to specify the LEC's ELAN membership by …
1.3.6.1.4.1.353.5.3.2.2.6.1RowelanLecMacAddrEntrynot-accessiblemandatoryEach entry represents a LEC to ELAN binding.
1.3.6.1.4.1.353.5.3.2.2.6.1.1ColumnelanLecMacAddressnot-accessiblemandatoryThe value of this object is the MAC address of a LAN Emulation client. When a CONFIGURE request is received with this MAC address, it will be assigned to the E…
1.3.6.1.4.1.353.5.3.2.2.6.1.2ColumnelanLecMacRowStatusread-writemandatoryThis object is used to create or destroy entries in this table.
1.3.6.1.4.1.353.5.3.2.2.7TableelanLecRdTablenot-accessiblemandatoryThis table is used to assign a LEC to an ELAN by Route Descriptor. When the by Route Descriptor policy is used, this table is used to specify the LEC's ELAN me…
1.3.6.1.4.1.353.5.3.2.2.7.1RowelanLecRdEntrynot-accessiblemandatoryEach entry represents a LEC to ELAN binding.
1.3.6.1.4.1.353.5.3.2.2.7.1.1ColumnelanLecRdSegIdnot-accessiblemandatoryThe LAN ID portion of the IEEE 802.5 route descriptor associated with this conceptual row.
1.3.6.1.4.1.353.5.3.2.2.7.1.2ColumnelanLecRdBridgeNumnot-accessiblemandatoryThe Bridge Number portion of the IEEE 802.5 route descriptor associated with this conceptual row.
1.3.6.1.4.1.353.5.3.2.2.7.1.4ColumnelanLecRdRowStatusread-writemandatoryThis object is used to create or destroy entries in this table.
1.3.6.1.4.1.353.5.3.2.2.8TableelanLecPktSizeTablenot-accessiblemandatoryThis table is used to assign a LEC to an ELAN by Packet Size. When the by Packet Size policy is used, this table is used to specifythe LEC's ELAN membership by…
1.3.6.1.4.1.353.5.3.2.2.8.1RowelanLecPktSizeEntrynot-accessiblemandatoryEach entry represents a LEC to ELAN binding.
1.3.6.1.4.1.353.5.3.2.2.8.1.1ColumnelanLecFrameSizenot-accessiblemandatoryThe maximum AAL-5 SDU size this LEC can support.
1.3.6.1.4.1.353.5.3.2.2.8.1.2ColumnelanLecPktSizeRowStatusread-writemandatoryThis object is used to create or destroy entries in this table.
1.3.6.1.4.1.353.5.3.2.2.9TableelanLecNameTablenot-accessiblemandatoryThis table is used to assign a LEC to an ELAN by ELAN name. When the by ELAN name policy is used, this table is used to specifythe LEC's ELAN membership by ELA…
1.3.6.1.4.1.353.5.3.2.2.9.1RowelanLecNameEntrynot-accessiblemandatoryEach entry represents a LEC to ELAN binding.
1.3.6.1.4.1.353.5.3.2.2.9.1.1ColumnelanLecElanNamenot-accessiblemandatoryThe name of the ELAN this LEC belongs.
1.3.6.1.4.1.353.5.3.2.2.9.1.2ColumnelanLecNameRowStatusread-writemandatoryThis object is used to create or destroy entries in this table.
1.3.6.1.4.1.353.5.3.2.3NodeelanLecsGroup
1.3.6.1.4.1.353.5.3.2.3.1NodeelanLecsConfGroup
1.3.6.1.4.1.353.5.3.2.3.1.1ScalarlecsConfNextIdread-onlymandatoryThe next available LECS index. The value of this object can be used as the index to the lecsTable during creation.
1.3.6.1.4.1.353.5.3.2.3.1.2TablelecsConfTablenot-accessiblemandatoryThis table contains the configuration information of all LECS this agent manages. This table can also be used to create, delete or configure a LECS.
1.3.6.1.4.1.353.5.3.2.3.1.2.1RowlecsConfEntrynot-accessiblemandatoryEach entry represents a LECS this agent maintains. Objects lecsAtmIfIndex, lecsAtmAddrSpec, and lecsAtmAddrMask cannot be modified unless the lecsAdminStatus i…
1.3.6.1.4.1.353.5.3.2.3.1.2.1.1ColumnlecsConfIndexnot-accessiblemandatoryAn arbitrary integer which represents a LECS this agent manages. If the conceptual row identified by this value of lecsConfIndex is recreated following an agen…
1.3.6.1.4.1.353.5.3.2.3.1.2.1.2ColumnlecsAtmIfIndexread-writemandatoryAn ATM interface which the LECS receives CONFIGURE requests from. This value must match an existing value in the ifTable. This object is set to zero when the A…
1.3.6.1.4.1.353.5.3.2.3.1.2.1.3ColumnlecsAtmAddrSpecread-writemandatoryAn ATM address specified by the network or local management that, with the ATM address mask, determines a portion of the ATM address that the LECS on the desig…
1.3.6.1.4.1.353.5.3.2.3.1.2.1.4ColumnlecsAtmAddrMaskread-writemandatoryThe ATM address mask associated with the object lecsAtmAddrSpec. The value of the mask is an ATM address with the don't care portion set to zero and the valid …
1.3.6.1.4.1.353.5.3.2.3.1.2.1.5ColumnlecsAtmAddrActualread-onlymandatoryThe resulting ATM address that the LECS is accepting CONFIGURE requests on the interface indicated by the object lecsAtmIfIndex. This address is the result of …
1.3.6.1.4.1.353.5.3.2.3.1.2.1.6ColumnlecsPolicySelIndexread-onlymandatoryThe set of policies used by this LECS in dertermining requesters ELAN membership. The policies are defined in the elanPolicyTable. The value of this object mus…
1.3.6.1.4.1.353.5.3.2.3.1.2.1.7ColumnlecsLastInitializedread-onlymandatoryThe value of the sysUpTime since LECS has last entered the state indicated by the object lecsOperStatus.
1.3.6.1.4.1.353.5.3.2.3.1.2.1.8ColumnlecsOperStatusread-onlymandatoryThis object reflects the actual state of the LECS which may differ from that of the lecsAdminStatus object. This can occur when the interface ifOperStatus is '…
1.3.6.1.4.1.353.5.3.2.3.1.2.1.9ColumnlecsAdminStatusread-writemandatoryThe desired state of the LECS on this interface as prescribed by the operator. The actions of the agent will, if at all possible, eventually result in the desi…
1.3.6.1.4.1.353.5.3.2.3.1.2.1.10ColumnlecsRowStatusread-writemandatoryThis object is used to create or delete entries in this table.
1.3.6.1.4.1.353.5.3.2.3.1.3TablelecsElanTablenot-accessiblemandatoryThis table contains the mapping between ELANs and LECS. When a LECS is deleted from the lecsConfTable, all entries associated with this entry will also be dele…
1.3.6.1.4.1.353.5.3.2.3.1.3.1RowlecsElanEntrynot-accessiblemandatoryEach entry represents an ELAN to LECS mapping.
1.3.6.1.4.1.353.5.3.2.3.1.3.1.1ColumnlecsElanRowStatusread-writemandatoryThis object is used to create or delete an entry from this table.
1.3.6.1.4.1.353.5.3.2.3.1.4TablelecsTlvTablenot-accessiblemandatoryThis table contains mandatoryly configured sets of TLVs in this LECS. These sets can include not only the standard TLVs specified in the LAN Emulation Spec. 1.…
1.3.6.1.4.1.353.5.3.2.3.1.4.1RowlecsTlvEntrynot-accessiblemandatoryEach entry represents a set of TLV encodings for an ELAN represented by the elanConfIndex. Objects lecsTlvVal and lecsTlvRowStatus are required during row crea…
1.3.6.1.4.1.353.5.3.2.3.1.4.1.1ColumnlecsTlvSelectorIndexnot-accessiblemandatoryThe value of this object indicates a group of TLVs that can be selected.
1.3.6.1.4.1.353.5.3.2.3.1.4.1.2ColumnlecsTlvTagnot-accessiblemandatoryThe value of this object represents the type of the contents of the lecsTlvVal field in the entry. The OUI field in this object occupies the first ( or most si…
1.3.6.1.4.1.353.5.3.2.3.1.4.1.3ColumnlecsTlvIndexnot-accessiblemandatoryThe index of this TLV encoding entry. The value of this object can be used to distinguish between different entries with the same lecsTlvTag value.
1.3.6.1.4.1.353.5.3.2.3.1.4.1.4ColumnlecsTlvValread-writemandatoryThe value of this TLV entry. Note that the length is implied by the length of the OCTET STRING.
1.3.6.1.4.1.353.5.3.2.3.1.4.1.5ColumnlecsTlvRowStatusread-writemandatoryThis object is used to create or destroy entries in this table.
1.3.6.1.4.1.353.5.3.2.3.1.5TablelecsVccTablenot-accessiblemandatoryThis table contains all the CONFIG VCCs of the LECS. The CONFIG VCC is used by the LEC to send/ receive ATM LE CONFIGURE request/response to/from the LECS. Thi…
1.3.6.1.4.1.353.5.3.2.3.1.5.1RowlecsVccEntrynot-accessiblemandatoryEach entry represents a CONFIG VCC between a pair of LEC and LECS.
1.3.6.1.4.1.353.5.3.2.3.1.5.1.1ColumnlecsVccIfIndexnot-accessiblemandatoryThe ATM interface which the CONFIG VCC is established. This value must be an existing value in the ifTable. The value of this object is set to zero when the AT…
1.3.6.1.4.1.353.5.3.2.3.1.5.1.2ColumnlecsVccVpinot-accessiblemandatoryThe VPI value of the CONFIG VCC. The object lecsVccIfIndex, lecsVccVci and this object uniquely identifies a VCC within an ATM system.
1.3.6.1.4.1.353.5.3.2.3.1.5.1.3ColumnlecsVccVcinot-accessiblemandatoryThe VCI value of the CONFIG VCC. The object lecsVccIfIndex, lecsVccVpi and this object uniquely identifies a VCC within an ATM system
1.3.6.1.4.1.353.5.3.2.3.1.5.1.4ColumnlecsVccRowStatusread-writemandatoryThis object is used to create or destroy entries in this table.
1.3.6.1.4.1.353.5.3.2.3.2NodeelanLecsFaultGroup
1.3.6.1.4.1.353.5.3.2.3.2.1TablelecsErrCtlTablenot-accessiblemandatoryThis table contains error log control information of all LECS instances. This table is an extention to the lecsConfTable. It is used to enable or disable error…
1.3.6.1.4.1.353.5.3.2.3.2.1.1RowlecsErrCtlEntrynot-accessiblemandatoryEach entry represents a LECS entry in the lecsConfTable.
1.3.6.1.4.1.353.5.3.2.3.2.1.1.1ColumnlecsErrCtlAdminStatusread-writemandatoryThis object is used to enable/disable error logging for the LECS.
1.3.6.1.4.1.353.5.3.2.3.2.1.1.2ColumnlecsErrCtlOperStatusread-onlymandatoryThis object is used to indicate the result of a set operation to the object lecsErrCtlAdminStatus. If the error log was successfully started, it is in active(2…
1.3.6.1.4.1.353.5.3.2.3.2.1.1.3ColumnlecsErrCtlClearLogread-writemandatoryThis object is used to clear the error log entries associated with this LECS.
1.3.6.1.4.1.353.5.3.2.3.2.1.1.4ColumnlecsErrCtlMaxEntriesread-onlymandatoryThe maximum entries of the error log a LECS can support.
1.3.6.1.4.1.353.5.3.2.3.2.1.1.5ColumnlecsErrCtlLastEntryread-writemandatoryThe index to the last entry in the error log table associated with this LECS.
1.3.6.1.4.1.353.5.3.2.3.2.2TablelecsErrLogTablenot-accessiblemandatoryThis table contains error logs of the LECS instances enabled in the lecsErrCtlTable. This table is indexed by the LECS instance index and an arbitrary integer …
1.3.6.1.4.1.353.5.3.2.3.2.2.1RowlecsErrLogEntrynot-accessiblemandatoryEach entry represents a LEC that was rejected due to a violation against the policies or an error.
1.3.6.1.4.1.353.5.3.2.3.2.2.1.1ColumnlecsErrLogIndexnot-accessiblemandatoryAn arbitrary integer which uniquely identifies an error log entry. The first entry after reset or clearing the error log is an assigned value (2^32-1). Succedi…
1.3.6.1.4.1.353.5.3.2.3.2.2.1.2ColumnlecsErrLogAtmAddrread-onlymandatoryThe ATM address of the requester which sends the CONFIGURE request and causes the error to occur. The corresponding error code is specified in the object lecsE…
1.3.6.1.4.1.353.5.3.2.3.2.2.1.3ColumnlecsErrLogErrCoderead-onlymandatoryThe Error code which indicates the cause of the error triggered by the CONFIGURE request sent by the requester indicated by the value of the object lecsErrLogA…
1.3.6.1.4.1.353.5.3.2.3.2.2.1.4ColumnlecsErrLogTimeread-onlymandatoryThe sysUpTime when this entry was logged by the LECS.
1.3.6.1.4.1.353.5.3.2.3.3NodeelanLecsStatGroup
1.3.6.1.4.1.353.5.3.2.3.3.1TablelecsStatsTablenot-accessiblemandatoryA (conceptual) table of statistics associated with all LECS instances on the device.
1.3.6.1.4.1.353.5.3.2.3.3.1.1RowlecsStatsEntrynot-accessiblemandatoryA (conceptual) row in the lecsStatsTable which corresponds to the statistics kept by a particular instance of a LECS.
1.3.6.1.4.1.353.5.3.2.3.3.1.1.1ColumnlecsStatSuccessfulread-onlymandatoryThe number of CONFIGURE requests successfully granted since the agent was last initialized.
1.3.6.1.4.1.353.5.3.2.3.3.1.1.2ColumnlecsStatInBadFramesread-onlymandatoryThe number of mal formed CONFIGURE requests dropped by the LECS.
1.3.6.1.4.1.353.5.3.2.3.3.1.1.3ColumnlecsStatInvalidParamread-onlymandatoryThe number of CONFIGURE requests rejected due to the invalid request parameters error.
1.3.6.1.4.1.353.5.3.2.3.3.1.1.4ColumnlecsStatInsufResread-onlymandatoryThe number of CONFIGURE requests rejected due to the insufficent resources to grant request error.
1.3.6.1.4.1.353.5.3.2.3.3.1.1.5ColumnlecsStatAccDeniedread-onlymandatoryThe number of CONFIGURE requests rejected due to the access denied error.
1.3.6.1.4.1.353.5.3.2.3.3.1.1.6ColumnlecsStatInvalidReqread-onlymandatoryThe number of CONFIGURE requests rejected due to the invalid requester-id error.
1.3.6.1.4.1.353.5.3.2.3.3.1.1.7ColumnlecsStatInvalidDestread-onlymandatoryThe number of CONFIGURE requests rejected due to the invalid destination error.
1.3.6.1.4.1.353.5.3.2.3.3.1.1.8ColumnlecsStatInvalidAddrread-onlymandatoryThe number of CONFIGURE requests rejected due to the invalid ATM address error.
1.3.6.1.4.1.353.5.3.2.3.3.1.1.9ColumnlecsStatNoConfread-onlymandatoryThe number of CONFIGURE requests rejected due to the LE Client is not recognized error.
1.3.6.1.4.1.353.5.3.2.3.3.1.1.10ColumnlecsStatConfErrorread-onlymandatoryThe number of CONFIGURE requests rejected due to the LE_CONFIGURE error.
1.3.6.1.4.1.353.5.3.2.3.3.1.1.11ColumnlecsStatInsufInforead-onlymandatoryThe number of CONFIGURE requests rejected due to the insufficient information error.