IBM-LES-LECS-MIB
20 objects
No module-level DESCRIPTION found.
Imported Objects
| NWAYSMSS-MIB | AtmPrivateAddrEsi AtmSelector AtmVccTrafficType Bandwidth mssServerLanE |
| RFC-1212 | OBJECT-TYPE |
| SNMPv2-TC-v1 | RowStatus TruthValue |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.2.6.118.1.2.1.2 | NodeibmLesLecsMIB | |||
| 1.3.6.1.4.1.2.6.118.1.2.1.2.1 | NodeibmLesLecsConfGroup | |||
| 1.3.6.1.4.1.2.6.118.1.2.1.2.1.1 | TablelesLecsConfTable | not-accessible | mandatory | This table contains the the configuration for LES-LECS interfaces. |
| 1.3.6.1.4.1.2.6.118.1.2.1.2.1.1.1 | RowlesLecsConfEntry | not-accessible | mandatory | Each entry in this table contains configuration parameters for the LES-LECS operation for an individual ATM physical interface. Object lesLecsRowStatus is requ… |
| 1.3.6.1.4.1.2.6.118.1.2.1.2.1.1.1.1 | ColumnlesLecsOperStatus | read-only | mandatory | The operational state of LES/LECS on this entry. Other defines the transition states between up and down. |
| 1.3.6.1.4.1.2.6.118.1.2.1.2.1.1.1.2 | ColumnlesLecsAdminStatus | read-write | mandatory | The administrative state of the LES/LECS on this entry. |
| 1.3.6.1.4.1.2.6.118.1.2.1.2.1.1.1.3 | ColumnlesLecsAtmDevNum | read-only | mandatory | Identifies ATM device to be used to interface with LECS. |
| 1.3.6.1.4.1.2.6.118.1.2.1.2.1.1.1.4 | ColumnlesLecsAtmDevLineSpeed | read-only | mandatory | Line Speed of LECS ATM Device. This should not exposed to the user. |
| 1.3.6.1.4.1.2.6.118.1.2.1.2.1.1.1.5 | ColumnlesLecsUseBurnedInEsi | read-write | mandatory | Specifies whether a MAC Address burned into the ATM device should be used as the End System Identifier component of local ATM Address used when calling LECS. |
| 1.3.6.1.4.1.2.6.118.1.2.1.2.1.1.1.6 | ColumnlesLecsConfiguredEsi | read-write | mandatory | Locally Administered End System Identifier that is to be used as the ESI component of the local ATM Address used when calling the LECS. |
| 1.3.6.1.4.1.2.6.118.1.2.1.2.1.1.1.7 | ColumnlesLecsConfiguredSelector | read-write | mandatory | Specifies value to be used as Selector field component of local ATM Address used when calling the LECS. |
| 1.3.6.1.4.1.2.6.118.1.2.1.2.1.1.1.8 | ColumnconfigDirectVccType | read-write | mandatory | Specifies type of traffic characteristics to be associated with Configuration Direct VCC to LECS. Bandwidth is not reserved for best effort traffic. |
| 1.3.6.1.4.1.2.6.118.1.2.1.2.1.1.1.9 | ColumnconfigDirectPcr | read-write | mandatory | Specifies the Peak Cell Rate (PCR) Traffic Parameter for the Configuration Direct VCC to the LECS. The specified rate is used for both forward and backward dir… |
| 1.3.6.1.4.1.2.6.118.1.2.1.2.1.1.1.10 | ColumnconfigDirectScr | read-write | mandatory | Specifies the Sustained Cell Rate (SCR) Traffic Parameter for the Configuration Direct VCC to the LECS. The specified rate is used for both forward and backwar… |
| 1.3.6.1.4.1.2.6.118.1.2.1.2.1.1.1.11 | ColumnlesLecsConfRowStatus | read-write | mandatory | This object is used to create or delete entries in the lesLecsConfTable. |
| 1.3.6.1.4.1.2.6.118.1.2.1.2.2 | NodeibmLesLecsMIBConformance | |||
| 1.3.6.1.4.1.2.6.118.1.2.1.2.2.1 | NodeibmLesLecsMIBGroups | |||
| 1.3.6.1.4.1.2.6.118.1.2.1.2.2.1.1 | NodeibmLesLecsCConfGroup | |||
| 1.3.6.1.4.1.2.6.118.1.2.1.2.2.2 | NodeibmLesLecsMIBCompliances | |||
| 1.3.6.1.4.1.2.6.118.1.2.1.2.2.2.1 | NodeibmLesLecsMIBCompliance |