IEEE802171-CFM-MIB
174 objects
Conectivity Fault Management module for managing IEEE 802.1ag
Imported Objects
| IANA-ADDRESS-FAMILY-NUMBERS-MIB | AddressFamilyNumbers |
| IF-MIB | InterfaceIndex |
| LLDP-MIB | LldpChassisId LldpChassisIdSubtype LldpManAddress LldpPortId LldpPortIdSubtype |
| Q-BRIDGE-MIB | VlanId VlanIdOrNone |
| SNMPv2-CONF | MODULE-COMPLIANCE NOTIFICATION-GROUP OBJECT-GROUP |
| SNMPv2-SMI | Counter32 Integer32 MODULE-IDENTITY NOTIFICATION-TYPE OBJECT-TYPE Unsigned32 zeroDotZero |
| SNMPv2-TC | MacAddress RowStatus TEXTUAL-CONVENTION TimeInterval TimeStamp TruthValue |
| TRANSPORT-ADDRESS-MIB | TransportAddress TransportDomain |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.0.8802.1.1.3 | Identityieee8021cfmMIB | Conectivity Fault Management module for managing IEEE 802.1ag | ||
| 1.0.8802.1.1.3.0 | Nodedot1agNotifications | |||
| 1.0.8802.1.1.3.0.1 | Notificationdot1agCfmFaultAlarm | current | A MEP has a persistent defect condition. A notification (fault alarm) is sent to the management entity with the OID of the MEP that has detected the fault. Whe… | |
| 1.0.8802.1.1.3.1 | Nodedot1agMIBObjects | |||
| 1.0.8802.1.1.3.1.1 | Nodedot1agCfmStack | |||
| 1.0.8802.1.1.3.1.1.1 | ScalarAn | not-accessible | current | While making the MIP creation evaluation described in 802.1ag clause 22.2.3, the management entity can encounter errors in the configuration. These are possibl… |
| 1.0.8802.1.1.3.1.2 | Nodedot1agCfmDefaultMdLevel | |||
| 1.0.8802.1.1.3.1.2.1 | Tabledot1agCfmDefaultMdLevelTable | not-accessible | current | The Default MD Level Managed Object controls MHF creation for VIDs that are not attached to a specific Maintenance Association Managed Object. The writable obj… |
| 1.0.8802.1.1.3.1.2.1.1 | Rowdot1agCfmDefaultMdLevelEntry | not-accessible | current | The Default MD Level table entry. |
| 1.0.8802.1.1.3.1.2.1.1.1 | Columndot1agCfmDefaultMdLevelIndex | not-accessible | current | The index to the default MD Level table |
| 1.0.8802.1.1.3.1.2.1.1.2 | Columndot1agCfmDefaultMdLevelVid | read-only | current | This is a VLAN ID monitored by MA. |
| 1.0.8802.1.1.3.1.2.1.1.3 | Columndot1agCfmDefaultMdLevelMhfCreation | read-write | current | A value indicating if the Management entity can create MHFs (MIP Half Function) for this VID. |
| 1.0.8802.1.1.3.1.2.1.1.4 | Columndot1agCfmDefaultMdLevelLevel | read-write | current | The MD Level at which MHFs are to be created, or -1 if defMHFnone. |
| 1.0.8802.1.1.3.1.3 | Nodedot1agCfmConfigErrorList | |||
| 1.0.8802.1.1.3.1.3.1 | Tabledot1agCfmConfigErrorListTable | not-accessible | current | The CFM Configuration Error List table provides a list of Interfaces and VIDs that are incorrectly configured. |
| 1.0.8802.1.1.3.1.3.1.1 | Rowdot1agCfmConfigErrorListEntry | not-accessible | current | The Config Error List Table entry |
| 1.0.8802.1.1.3.1.3.1.1.1 | Columndot1agCfmConfigErrorListVid | not-accessible | current | The vlan ID of the vlan with errored interfaces. |
| 1.0.8802.1.1.3.1.3.1.1.2 | Columndot1agCfmConfigErrorListIfIndex | not-accessible | current | This object is the IfIndex of the interface. |
| 1.0.8802.1.1.3.1.3.1.1.3 | Columndot1agCfmConfigErrorListErrorType | read-only | current | A vector of Boolean error conditions from 22.2.4, any of which may be true: 1) CFMleak; 2) ConflictingVids; 3) ExcessiveLevels; 4) OverlappedLevels. |
| 1.0.8802.1.1.3.1.4 | Nodedot1agCfmMd | |||
| 1.0.8802.1.1.3.1.4.1 | Scalardot1agCfmMdTableNextIndex | read-only | current | This object contains an unused value for dot1agCfmMdIndex in the dot1agCfmMdTable, or a zero to indicate that none exist. |
| 1.0.8802.1.1.3.1.4.2 | Tabledot1agCfmMdTable | not-accessible | current | The MaintenanceDomain table. Each row in the table represents a different maintenance domain. A Maintenace domain is described in 802.1ag (3.22) as the network… |
| 1.0.8802.1.1.3.1.4.2.1 | Rowdot1agCfmMdEntry | not-accessible | current | The Maintenance Domain table entry. This entry is not lost upon reboot. It is backed up by stable storage. |
| 1.0.8802.1.1.3.1.4.2.1.1 | Columndot1agCfmMdIndex | not-accessible | current | The index to the maintenance domain table. dot1agCfmMdTableNextIndex needs to be inspected to find an available index for row-creation. Referential integrity i… |
| 1.0.8802.1.1.3.1.4.2.1.2 | Columndot1agCfmMdFormat | read-create | current | The type (and thereby format) of the Maintenance Domain Name. |
| 1.0.8802.1.1.3.1.4.2.1.3 | Columndot1agCfmMdName | read-create | current | The Maintenance Domain name. The type/format of this object is determined by the value of the dot1agCfmMdNameType object. Each Maintenance Domain has unique na… |
| 1.0.8802.1.1.3.1.4.2.1.4 | Columndot1agCfmMdLevel | read-create | current | The Maintenance Domain Level. |
| 1.0.8802.1.1.3.1.4.2.1.5 | Columndot1agCfmMdMhfCreation | read-create | current | Enumerated value indicating whether the management entity can create MHFs (MIP Half Function) for this Maintenance Domain. |
| 1.0.8802.1.1.3.1.4.2.1.6 | Columndot1agCfmMdFaultAlarmDestDomain | read-create | current | The transportDomain for the address to which Fault Alarms are to be transmitted. Typical values will be one of (not all inclusive) list: transportDomainUdpIpv4… |
| 1.0.8802.1.1.3.1.4.2.1.7 | Columndot1agCfmMdFaulAlarmDestAddress | read-create | current | The transportAddress to which Fault Alarms are to be transmitted to. The type/format of this object is determined by the value of the dot1agCfmMdFaultAlarmDest… |
| 1.0.8802.1.1.3.1.4.2.1.8 | Columndot1agCfmMdRowStatus | read-create | current | The status of the row. The writable columns in a row can not be changed if the row is active. All columns must have a valid value before a row can be activated. |
| 1.0.8802.1.1.3.1.5 | Nodedot1agCfmMa | |||
| 1.0.8802.1.1.3.1.5.1 | Scalardot1agCfmMaTableNextIndex | read-only | current | Value to be used as the index of the MA table when the management entity wants to create a new row in the table. |
| 1.0.8802.1.1.3.1.5.3 | Tabledot1agCfmMaTable | not-accessible | current | The Maintenance Association table. Each row in the table represents an MA. An MA is a set of MEPs, each configured with a single service instance. Creation of … |
| 1.0.8802.1.1.3.1.5.3.1 | Rowdot1agCfmMaEntry | not-accessible | current | The MA table entry. |
| 1.0.8802.1.1.3.1.5.3.1.1 | Columndot1agCfmMaIndex | not-accessible | current | Index of the MA table dot1agCfmMaTableNextIndex needs to be inspected to find an available index for row-creation 1..4094 -> describes an MA entry associated w… |
| 1.0.8802.1.1.3.1.5.3.1.2 | Columndot1agCfmMaFormat | read-create | current | The type (and thereby format) of the Maintenance Association Name. |
| 1.0.8802.1.1.3.1.5.3.1.3 | Columndot1agCfmMaName | read-create | current | The Short Maintenance Association name. The type/format of this object is determined by the value of the dot1agCfmMaNameType object. |
| 1.0.8802.1.1.3.1.5.3.1.4 | Columndot1agCfmMaMhfCreation | read-create | current | Indicates if the Management entity can create MHFs (MIP Half Function) for this MA. |
| 1.0.8802.1.1.3.1.5.3.1.5 | Columndot1agCfmMaCcmInterval | read-create | current | Interval between CCM transmissions to be used by all MEPs in the MA. |
| 1.0.8802.1.1.3.1.5.3.1.6 | Columndot1agCfmMaFaultAlarmDestDomain | read-create | current | The transportDomain for the address to which Fault Alarms are to be transmitted. Typical values will be one of (not all inclusive) list: transportDomainUdpIpv4… |
| 1.0.8802.1.1.3.1.5.3.1.7 | Columndot1agCfmMaFaulAlarmDestAddress | read-create | current | The transportAddress to which Fault Alarms are to be transmitted to. The type/format of this object is determined by the value of the dot1agCfmMaFaultAlarmDest… |
| 1.0.8802.1.1.3.1.5.3.1.8 | Columndot1agCfmMaMoreThanOneVid | read-create | current | True indicate that the MA is associated with more that one VID. False indicates that the MA is associated with only one VID or no VID. This value should be fal… |
| 1.0.8802.1.1.3.1.5.3.1.9 | Columndot1agCfmMaRowStatus | read-create | current | The status of the row. The writable columns in a row can not be changed if the row is active. All columns must have a valid value before a row can be activated. |
| 1.0.8802.1.1.3.1.5.4 | Tabledot1agCfmMaVlanTable | not-accessible | current | If an MA is associated with multiple VIDs, then this table contains all the VIDs associated with the MA other than the primary VID. The writable objects in thi… |
| 1.0.8802.1.1.3.1.5.4.1 | Rowdot1agCfmMaVlanEntry | not-accessible | current | The Maintenance Association VLAN table entry. |
| 1.0.8802.1.1.3.1.5.4.1.1 | Columndot1agCfmMaVlanVid | not-accessible | current | This is a VLAN ID of the vlan monitored by the MA. VID 0 means that the MA is not associated with any VLAN. |
| 1.0.8802.1.1.3.1.5.4.1.2 | Columndot1agCfmMaVlanRowStatus | read-create | current | The status of the row. The writable columns in a row can not be changed if the row is active. All columns must have a valid value before a row can be activated. |
| 1.0.8802.1.1.3.1.5.8 | Tabledot1agCfmMaMepListTable | not-accessible | current | List of MEPIDs (in any bridge) that belong to the same MA. Clause 12.14.6.1.3 specifies that a list of MEPIDs in all bridges in that MA, but since SNMP SMI doe… |
| 1.0.8802.1.1.3.1.5.8.1 | Rowdot1agCfmMaMepListEntry | not-accessible | current | The known MEPS table entry. |
| 1.0.8802.1.1.3.1.5.8.1.1 | Columndot1agCfmMaMepListIdentifier | not-accessible | current | MEPID |
| 1.0.8802.1.1.3.1.5.8.1.2 | Columndot1agCfmMaMepListRowStatus | read-create | current | The status of the row. Read SNMPv2-TC (RFC1903) for an explanation of the possible values this object can take. |
| 1.0.8802.1.1.3.1.6 | Nodedot1agCfmMep | |||
| 1.0.8802.1.1.3.1.6.1 | Tabledot1agCfmMepTable | not-accessible | current | The Maintenance Association End Point (MEP) table. Each row in the table represents a different MEP. A MEP is an actively managed CFM entity, associated with a… |
| 1.0.8802.1.1.3.1.6.1.1 | Rowdot1agCfmMepEntry | not-accessible | current | The MEP table entry |
| 1.0.8802.1.1.3.1.6.1.1.1 | Columndot1agCfmMepIdentifier | not-accessible | current | Integer that is unique among all the MEPs in the same MA. Other definition is: a small integer, unique over a given Maintenance Association, identifying a spec… |
| 1.0.8802.1.1.3.1.6.1.1.2 | Columndot1agCfmMepIfIndex | read-create | current | This object is the interface index of the interface eiter a bridge port, or an aggregated IEEE 802.1 link within a bridge port, to which the MEP is attached. |
| 1.0.8802.1.1.3.1.6.1.1.3 | Columndot1agCfmMepDirection | read-create | current | The direction in which the MEP faces on the Bridge port. |
| 1.0.8802.1.1.3.1.6.1.1.4 | Columndot1agCfmMepPrimaryVid | read-create | current | An integer indicating the Primary VID of the MEP, always one of the VIDs assigned to the MEP's MA. The value 0 indicates that either the Primary VID is that of… |
| 1.0.8802.1.1.3.1.6.1.1.5 | Columndot1agCfmMepActive | read-create | current | Administrative state of the MEP A Boolean indicating the administrative state of the MEP. True indicates that the MEP is to function normally, and false that i… |
| 1.0.8802.1.1.3.1.6.1.1.6 | Columndot1agCfmMepFngState | read-only | current | Current state of the MEP Fault Notification Generator State Machine. |
| 1.0.8802.1.1.3.1.6.1.1.7 | Columndot1agCfmMepCciEnabled | read-create | current | If set to true, the MEP will generate CCM messages. |
| 1.0.8802.1.1.3.1.6.1.1.8 | Columndot1agCfmMepCcmLtmPriority | read-create | current | The priority value for CCMs and LTMs transmitted by the MEP. Default Value in the highest priority value allowed to pass through the bridge port for any of thi… |
| 1.0.8802.1.1.3.1.6.1.1.9 | Columndot1agCfmMepMacAddress | read-only | current | MAC address of the MEP. |
| 1.0.8802.1.1.3.1.6.1.1.10 | Columndot1agCfmMepFaultAlarmDestDomain | read-create | current | The transportDomain for the address to which Fault Alarms are to be transmitted. Typical values will be one of (not all inclusive) list: transportDomainUdpIpv4… |
| 1.0.8802.1.1.3.1.6.1.1.11 | Columndot1agCfmMepFaulAlarmDestAddress | read-create | current | The transportAddress to which Fault Alarms (12.14.7.7) are to be transmitted to. The type/format of this object is determined by the value of dot1agCfmMepFault… |
| 1.0.8802.1.1.3.1.6.1.1.12 | Columndot1agCfmMepLowPrDef | read-create | current | An integer value specifying the lowest priority defect that is allowed to generate fault alarm. |
| 1.0.8802.1.1.3.1.6.1.1.13 | Columndot1agCfmMepFngAlarmTime | read-create | current | The time that defects must be present before a Fault Alarm is issued (fngAlarmTime. 20.33.3) (default 2.5s). |
| 1.0.8802.1.1.3.1.6.1.1.14 | Columndot1agCfmMepFngResetTime | read-create | current | The time that defects must be absent before re-enabling a Fault Alarm (fngResetTime, 20.33.4) (default 10s). |
| 1.0.8802.1.1.3.1.6.1.1.15 | Columndot1agCfmMepHighestPrDefect | read-only | current | The highest priority defect that has been present since the MEPs Fault Notification Generator State Machine was last in the FNG_RESET state. |
| 1.0.8802.1.1.3.1.6.1.1.16 | Columndot1agCfmMepSomeRdiDefect | read-only | current | A Boolean flag indicating that some other MEP in this MEP's MA is transmitting the RDI bit. |
| 1.0.8802.1.1.3.1.6.1.1.17 | Columndot1agCfmMepErrMacStatus | read-only | current | A Boolean flag (someMACstatusDefect, 20.33.6) indicating that a Port Status TLV (21.5.4) or Interface Status TLV (21.5.5) is indicating an error condition (can… |
| 1.0.8802.1.1.3.1.6.1.1.18 | Columndot1agCfmMepSomeRMepCcmDefect | read-only | current | A Boolean flag indicating that CCMs are not being received from at least one of the configured remote MEPs. |
| 1.0.8802.1.1.3.1.6.1.1.19 | Columndot1agCfmMepErrorCcmDefect | read-only | current | A Boolean flag indicating that a stream of erroneous CCMs is being received from some MEP in this MEP's MA. |
| 1.0.8802.1.1.3.1.6.1.1.20 | Columndot1agCfmMepXconCcmDefect | read-only | current | A Boolean flag indicating that a stream of CCMs is being received from a MEP that may be in some other MA. |
| 1.0.8802.1.1.3.1.6.1.1.21 | Columndot1agCfmMepErrorCcmLastFailure | read-only | current | The last-received CCM that triggered an DefErrorCCM fault. |
| 1.0.8802.1.1.3.1.6.1.1.22 | Columndot1agCfmMepXconCcmLastFailure | read-only | current | The last-received CCM that triggered a DefXconCCM fault. |
| 1.0.8802.1.1.3.1.6.1.1.23 | Columndot1agCfmMepRCcmSequenceErrors | read-only | current | The total number of out-of-sequence CCMs received from all remote MEPs. |
| 1.0.8802.1.1.3.1.6.1.1.24 | Columndot1agCfmMepCciSentCcms | read-only | current | Total number of Continuity Check messages transmitted. |
| 1.0.8802.1.1.3.1.6.1.1.25 | Columndot1agCfmMepNextLbmTransId | read-only | current | Next sequence number/transaction identifier to be sent in a Loopback message. This sequence number can be zero because it wraps around. |
| 1.0.8802.1.1.3.1.6.1.1.26 | Columndot1agCfmMepLbrIn | read-only | current | Total number of valid, in-order Loopback Replies received. |
| 1.0.8802.1.1.3.1.6.1.1.27 | Columndot1agCfmMepLbrInOutOfOrder | read-only | current | The total number of valid, out-of-order Loopback Replies received. |
| 1.0.8802.1.1.3.1.6.1.1.28 | Columndot1agCfmMepLbrBadMsdu | read-only | current | (optional) The total number of LBRs received whose mac_service_data_unit did not match (except for the OpCode) that of the corresponding LBM (20.2.3). |
| 1.0.8802.1.1.3.1.6.1.1.29 | Columndot1agCfmMepLtmNextSeqNumber | read-only | current | Next transaction identifier/sequence number to be sent in a Linktrace message. This sequence number can be zero because it wraps around. |
| 1.0.8802.1.1.3.1.6.1.1.30 | Columndot1agCfmMepUnexpLtrIn | read-only | current | The total number of unexpected LTRs received (20.39.1). |
| 1.0.8802.1.1.3.1.6.1.1.31 | Columndot1agCfmMepLbrOut | read-only | current | Total number of Loopback Replies transmitted. |
| 1.0.8802.1.1.3.1.6.1.1.32 | Columndot1agCfmMepTransmitLbmStatus | read-write | current | A Boolean flag set to true by the bridge port to indicate that another LBM may be transmitted. Reset to false by the MEP Loopback Initiator State Machine. |
| 1.0.8802.1.1.3.1.6.1.1.33 | Columndot1agCfmMepTransmitLbmDestMacAddress | read-create | current | The Target MAC Address Field to be transmitted: A unicast destination MAC address. This address will be used if the value of the column dot1agCfmMepTransmitLbm… |
| 1.0.8802.1.1.3.1.6.1.1.34 | Columndot1agCfmMepTransmitLbmDestMepId | read-create | current | The Maintenance association End Point Identifier of another MEP in the same Maintenance Association to which the LBM is to be sent. This address will be used i… |
| 1.0.8802.1.1.3.1.6.1.1.35 | Columndot1agCfmMepTransmitLbmDestIsMepId | read-create | current | True indicates that MepID of the target MEP is used for Loopback transmission. False indicates that unicast destination MAC address of the target MEP is used f… |
| 1.0.8802.1.1.3.1.6.1.1.36 | Columndot1agCfmMepTransmitLbmMessages | read-create | current | The number of Loopback messages to be transmitted. |
| 1.0.8802.1.1.3.1.6.1.1.37 | Columndot1agCfmMepTransmitLbmDataTlv | read-create | current | An arbitrary amount of data to be included in the Data TLV, if the Data TLV is selected to be sent. |
| 1.0.8802.1.1.3.1.6.1.1.38 | Columndot1agCfmMepTransmitLbmVlanPriority | read-create | current | Priority. 3 bit value to be used in the VLAN tag, if present in the transmitted frame. The default value is CCM priority. |
| 1.0.8802.1.1.3.1.6.1.1.39 | Columndot1agCfmMepTransmitLbmVlanDropEnable | read-create | current | Drop Enable bit value to be used in the VLAN tag, if present in the transmitted frame. For more information about VLAN Drop Enable, please check IEEE 802.1ad. |
| 1.0.8802.1.1.3.1.6.1.1.40 | Columndot1agCfmMepTransmitLbmResultOK | read-only | current | Indicates the result of the operation: - true The Loopback Message(s) will be (or hasbeen) sent. - false The Loopback Message(s) will not be sent. |
| 1.0.8802.1.1.3.1.6.1.1.41 | Columndot1agCfmMepTransmitLbmSeqNumber | read-only | current | The Loopback Transaction Identifier (dot1agCfmMepNextLbmTransId) of the first LBM (to be) sent. The value returned is undefined if dot1agCfmMepTransmitLbmResul… |
| 1.0.8802.1.1.3.1.6.1.1.42 | Columndot1agCfmMepTransmitLtmStatus | read-write | current | A Boolean flag set to true by the bridge port to indicate that another LTM may be transmitted. Reset to false by the MEP Linktrace Initiator State Machine. |
| 1.0.8802.1.1.3.1.6.1.1.43 | Columndot1agCfmMepTransmitLtmFlags | read-create | current | The flags field for LTMs transmitted by the MEP. |
| 1.0.8802.1.1.3.1.6.1.1.44 | Columndot1agCfmMepTransmitLtmTargetMacAddress | read-create | current | The Target MAC Address Field to be transmitted: A unicast destination MAC address. This address will be used if the value of the column dot1agCfmMepTransmitLtm… |
| 1.0.8802.1.1.3.1.6.1.1.45 | Columndot1agCfmMepTransmitLtmTargetMepId | read-create | current | An indication of the Target MAC Address Field to be transmitted: The Maintenance association End Point Identifier of another MEP in the same Maintenance Associ… |
| 1.0.8802.1.1.3.1.6.1.1.46 | Columndot1agCfmMepTransmitLtmTargetIsMepId | read-create | current | True indicates that MepID of the target MEP is used for Linktrace transmission. False indicates that unicast destination MAC address of the target MEP is used … |
| 1.0.8802.1.1.3.1.6.1.1.47 | Columndot1agCfmMepTransmitLtmTtl | read-create | current | The LTM TTL field. Default value, if not specified, is 64. The TTL field indicates the number of hops remaining to the LTM. Decremented by 1 by each Linktrace … |
| 1.0.8802.1.1.3.1.6.1.1.48 | Columndot1agCfmMepTransmitLtmResult | read-only | current | Indicates the result of the operation: - true The Linktrace Message will be (or has been) sent. - false The Linktrace Message will not be sent |
| 1.0.8802.1.1.3.1.6.1.1.49 | Columndot1agCfmMepTransmitLtmSeqNumber | read-only | current | The LTM Transaction Identifier (dot1agCfmMepLtmNextSeqNumber) of the LTM sent. The value returned is undefined if dot1agCfmMepTransmitLtmResult is false. |
| 1.0.8802.1.1.3.1.6.1.1.50 | Columndot1agCfmMepTransmitLtmEgressIdentifier | read-create | current | Identifies the MEP Linktrace Initiator that is originating, or the Linktrace Responder that is forwarding, this LTM. The low-order six octets contain a 48-bit … |
| 1.0.8802.1.1.3.1.6.1.1.51 | Columndot1agCfmMepRowStatus | read-create | current | The status of the row. The writable columns in a row can not be changed if the row is active. All columns must have a valid value before a row can be activated. |
| 1.0.8802.1.1.3.1.6.2 | Tabledot1agCfmLtrTable | not-accessible | current | This table extends the MEP table and contains a list of Linktrace replies received by a specific MEP in response to a linktrace message. SNMP SMI does not allo… |
| 1.0.8802.1.1.3.1.6.2.1 | Rowdot1agCfmLtrEntry | not-accessible | current | The LinktraceReply table entry. |
| 1.0.8802.1.1.3.1.6.2.1.1 | Columndot1agCfmLtrSeqNumber | not-accessible | current | Transaction identifier/Sequence number returned by a previous transmit linktrace message command, indicating which LTM's response is going to be returned. |
| 1.0.8802.1.1.3.1.6.2.1.2 | Columndot1agCfmLtrReceiveOrder | not-accessible | current | An index to distinguish among multiple LTRs with the same LTR Transaction Identifier field value. dot1agCfmLtrReceiveOrder are assigned sequentially from 1, in… |
| 1.0.8802.1.1.3.1.6.2.1.3 | Columndot1agCfmLtrTtl | read-only | current | TTL field value for a returned LTR. |
| 1.0.8802.1.1.3.1.6.2.1.4 | Columndot1agCfmLtrForwarded | read-only | current | Indicates if a LTM was forwarded by the repsonding MP, as returned ind the 'FwdYes' flag of the flags field. |
| 1.0.8802.1.1.3.1.6.2.1.5 | Columndot1agCfmLtrTerminalMep | read-only | current | A boolean value stating whether the forwarded LTM reached a MEP enclosing its MA, as returned in the Terminal MEP flag of the Flags field. |
| 1.0.8802.1.1.3.1.6.2.1.6 | Columndot1agCfmLtrLastEgressIdentifier | read-only | current | An octet field holding the Last Egress Identifier returned in the LTR. The Last Egress Identifier identifies the MEP Linktrace Initiator that originated, or th… |
| 1.0.8802.1.1.3.1.6.2.1.7 | Columndot1agCfmLtrNextEgressIdentifier | read-only | current | An octet field holding the Next Egress Identifier returned in the LTR. The Next Egress Identifier Identifies the Linktrace Responder that transmitted this LTR,… |
| 1.0.8802.1.1.3.1.6.2.1.8 | Columndot1agCfmLtrRelay | read-only | current | Value returned in the Relay Action field. |
| 1.0.8802.1.1.3.1.6.2.1.9 | Columndot1agCfmLtrChassisIdSubtype | read-only | current | This object specifies the format of the Chassis ID returned in the Sender ID TLV of the LTR, if any. This value is meaningless if the dot1agCfmLtrChassisId has… |
| 1.0.8802.1.1.3.1.6.2.1.10 | Columndot1agCfmLtrChassisId | read-only | current | The Chassis ID returned in the Sender ID TLV of the LTR, if any. The format of this object is determined by the value of the dot1agCfmLtrChassisIdSubtype objec… |
| 1.0.8802.1.1.3.1.6.2.1.11 | Columndot1agCfmLtrManAddressType | read-only | current | Management Address subtype of the bridge transmitting the LTR, if returned in a Sender ID TLV. The value is meaningless if the dot1agCfmLtrManAddress has a len… |
| 1.0.8802.1.1.3.1.6.2.1.12 | Columndot1agCfmLtrManAddress | read-only | current | Management Address information of the bridge transmitting the LTR, if returned in the Sender ID TLV. Some limitation to the size of the TLVs carrying a Manaeme… |
| 1.0.8802.1.1.3.1.6.2.1.13 | Columndot1agCfmLtrIngress | read-only | current | The value returned in the Ingress Action Field of the LTM. |
| 1.0.8802.1.1.3.1.6.2.1.14 | Columndot1agCfmLtrIngressMac | read-only | current | MAC address returned in the ingress MAC address field. |
| 1.0.8802.1.1.3.1.6.2.1.15 | Columndot1agCfmLtrIngressPortIdSubtype | read-only | current | Format of the Ingress Port ID. |
| 1.0.8802.1.1.3.1.6.2.1.16 | Columndot1agCfmLtrIngressPortId | read-only | current | Ingress Port ID. The format of this object is determined by the value of the dot1agCfmLtrIngressPortIdSubtype object. |
| 1.0.8802.1.1.3.1.6.2.1.17 | Columndot1agCfmLtrEgress | read-only | current | The value returned in the Egress Action Field of the LTM. |
| 1.0.8802.1.1.3.1.6.2.1.18 | Columndot1agCfmLtrEgressMac | read-only | current | MAC address returned in the egress MAC address field. |
| 1.0.8802.1.1.3.1.6.2.1.19 | Columndot1agCfmLtrEgressPortIdSubtype | read-only | current | Format of the egress Port ID. |
| 1.0.8802.1.1.3.1.6.2.1.20 | Columndot1agCfmLtrEgressPortId | read-only | current | Egress Port ID. The format of this object is determined by the value of the dot1agCfmLtrEgressPortIdSubtype object. |
| 1.0.8802.1.1.3.1.6.2.1.21 | Columndot1agCfmLtrOrganizationSpecificTlv | read-only | current | All Organization specific TLVs returned in the LTR, if any. Includes all octets including and following the TLV Length field of each TLV, concatenated together. |
| 1.0.8802.1.1.3.1.6.3 | Tabledot1agCfmMepDbTable | not-accessible | current | The MEP Database. A database, maintained by every MEP, that maintains received information about other MEPs in the Maintenance Domain. SNMP SMI does not allow … |
| 1.0.8802.1.1.3.1.6.3.1 | Rowdot1agCfmMepDbEntry | not-accessible | current | The MEP Database table entry. |
| 1.0.8802.1.1.3.1.6.3.1.1 | Columndot1agCfmMepDbRMepIdentifier | not-accessible | current | Maintenance association End Point Identifier of a remote MEP whose information from the MEP Database is to be returned. |
| 1.0.8802.1.1.3.1.6.3.1.2 | Columndot1agCfmMepDbRMepState | read-only | current | The operational state of the remote MEP IFF State machines. |
| 1.0.8802.1.1.3.1.6.3.1.3 | Columndot1agCfmMepDbRMepFailedOkTime | read-only | current | The time (SysUpTime) at which the IFF Remote MEP state machine last entered either the RMEP_FAILED or RMEP_OK state. |
| 1.0.8802.1.1.3.1.6.3.1.4 | Columndot1agCfmMepDbMacAddress | read-only | current | The MAC address of the remote MEP. |
| 1.0.8802.1.1.3.1.6.3.1.5 | Columndot1agCfmMepDbRdi | read-only | current | State of the RDI bit in the last received CCM (true for RDI=1), or false if none has been received. |
| 1.0.8802.1.1.3.1.6.3.1.6 | Columndot1agCfmMepDbPortStatusTlv | read-only | current | An enumerated value of the Port status TLV received in the last CCM from the remote MEP or the default value psNoPortStateTLV indicating either no CCM has been… |
| 1.0.8802.1.1.3.1.6.3.1.7 | Columndot1agCfmMepDbInterfaceStatusTlv | read-only | current | An enumerated value of the Interface status TLV received in the last CCM from the remote MEP or the default value isNoInterfaceStatus TLV indicating either no … |
| 1.0.8802.1.1.3.1.6.3.1.8 | Columndot1agCfmMepDbChassisIdSubtype | read-only | current | This object specifies the format of the Chassis ID received in the last CCM. |
| 1.0.8802.1.1.3.1.6.3.1.9 | Columndot1agCfmMepDbChassisId | read-only | current | The Chassis ID. The format of this object is determined by the value of the dot1agCfmLtrChassisIdSubtype object. |
| 1.0.8802.1.1.3.1.6.3.1.10 | Columndot1agCfmMepDbManAddressType | read-only | current | Management Address subtype of the bridge transmitting the CCM. |
| 1.0.8802.1.1.3.1.6.3.1.11 | Columndot1agCfmMepDbManAddress | read-only | current | Management Address information of the bridge transmitting the CCM. Some limitation to the size of the TLVs carrying a Manaement Address is needed, as there is … |
| 1.0.8802.1.1.3.2 | Nodedot1agCfmConformance | |||
| 1.0.8802.1.1.3.2.1 | Nodedot1agCfmCompliances | |||
| 1.0.8802.1.1.3.2.1.1 | Compliancedot1agCfmCompliance | current | The compliance statement for support of the CFM MIB module. | |
| 1.0.8802.1.1.3.2.2 | Nodedot1agCfmGroups | |||
| 1.0.8802.1.1.3.2.2.1 | Groupdot1agCfmStackGroup | current | Objects for the Stack group. | |
| 1.0.8802.1.1.3.2.2.2 | Groupdot1agCfmDefaultMdLevelGroup | current | Objects for the Default MD Level group. | |
| 1.0.8802.1.1.3.2.2.3 | Groupdot1agCfmConfigErrorListGroup | current | Objects for the Cfm Configuration Error List Group. | |
| 1.0.8802.1.1.3.2.2.4 | Groupdot1agCfmMdGroup | current | Objects for the Maintenance Domain Group. | |
| 1.0.8802.1.1.3.2.2.5 | Groupdot1agCfmMaGroup | current | Objects for the MA group. | |
| 1.0.8802.1.1.3.2.2.6 | Groupdot1agCfmMepGroup | current | Objects for the MEP group. | |
| 1.0.8802.1.1.3.2.2.7 | Groupdot1agCfmMepDbGroup | current | Objects for the MEP group. | |
| 1.0.8802.1.1.3.2.2.8 | Groupdot1agCfmNotificationsGroup | current | Objects for the Notifications group. |
Type Definitions
| Name | Syntax | Status | Description |
|---|---|---|---|
| Dot1afCfmIndexIntegerNextFree | always contains a legal value (if non-zero) for an index that is not currently used in the relevant table. The Command Generator (Network Management Application) reads this variable and uses the (non-zero) value read when creating a new row with an SNMP SET. When the SET is performed, the Command Responder (agent) must determine whether the value is indeed still unused; Two Network Management Applications may attempt to create a row (configuration entry) simultaneously and use the same value. If it is currently unused, the SET succeeds and the Command Responder (agent) changes the value of this object, according to an implementation-specific algorithm. If the value is in use, however, the SET fails. The Network Management Application must then re-read this variable to obtain a new usable value. | current | |
| Dot1agCfmCcmInterval | INTEGER { intervalInvalid (0), interval300Hz (1), interval10ms (2), interval100ms (3), interval1s (4), interval10s (5), interval1min (6), interval10min (7) } | current | Indicates the interval at which CCMs are sent by a MEP. The possible values are: intervalInvalid(0) No CCMs are sent (disabled). interval300Hz(1) CCMs are sent every 3 1/3 milliseconds (300Hz). interval10ms(2) CCMs are … |
| Dot1agCfmConfigErrors | BITS { cfmLeak(0), conflictingVids(1), excessiveLevels(2), overlappedLevels(3) } | current | While making the MIP creation evaluation described in 802.1ag clause 22.2.3, the management entity can encounter errors in the configuration. These are possible errors that can be encountered: CFMleak(0) MA x is associa… |
| Dot1agCfmEgressActionFieldValue | INTEGER { egrOK (1), egrDown (2), egrBlocked (3), egrVid (4) } Dot1agCfmRemoteMepState::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "Operational state of the remote MEP state machine. This state machine motitors the reception of valid CCMs from a remote MEP with a specific MEPID. It uses a timer that expires in 3.5 times the lengh of time indicated by the dot1agCfmMaCcmInterval object. rMepIdle(1) Momentary state during reset. rMepStart(2) The timer has not expired since the state machine was reset, and no valid CCM has yet been received. rMepFailed(3) The timer has expired, both since the state machine was reset, and since a valid CCM was received. rMepOk(4) The timer has not expired since a valid CCM was received. " REFERENCE "802.1ag clauses 12.14.7.6.3:b, 20.22" SYNTAX INTEGER { rMepIdle (1), rMepStart (2), rMepFailed (3), rMepOk (4) } | current | Possible values returned in the egress action field |
| Dot1agCfmFngState | INTEGER { fngReset (1), fngDefect (2), fngReportDefect (3), fngDefectReported (4), fngDefectClearing (5) } | current | Indicates the diferent states of the MEP Fault Notification Generator State Machine. fngReset(1) No defect has been present since the dot1agCfmMepFngResetTime timer expired, or since the state machine was last reset. fn… |
| Dot1agCfmHighestDefectPri | INTEGER { none (1), defRDICCM (2), defMACstatus (3), defRemoteCCM (4), defErrorCCM (5), defXconCCM (6) } | current | An enumerated value, equal to the contents of the variable highestDefect (20.33.9 and Table 20-1), indicating the highest-priority defect that has been present since the MEP Fault Notification Generator State Machine wa… |
| Dot1agCfmIngressActionFieldValue | INTEGER { ingOk (1), ingDown (2), ingBlocked (3), ingVid (4) } | current | Possible values returned in the ingress action field. |
| Dot1agCfmInterfaceStatus | INTEGER { isNoInterfaceSatatusTLV (0), isUp (1), isDown (2), isTesting (3), isUnknown (4), isDormant (5), isNotPresent (6), isLowerLayerDown (7) } | current | An enumerated value from the Interface Status TLV from the last CCM received from the last MEP. It indicates the status of the Interface within which the MEP transmitting the CCM is configuredr, or the next lower Interf… |
| Dot1agCfmLowestAlarmPri | INTEGER { allDef (1), macRemErrXcon (2), remErrXcon (3), errXcon (4), xcon (5), noDef (6) } | current | An integer value specifying the lowest priority defect that is allowed to generate a Fault Alarm (20.9.5), either: allDef(1) DefRDICCM, DefMACstatus, DefRemoteCCM, DefErrorCCM, and DefXconCCM; macRemErrXcon(2) Only DefM… |
| Dot1agCfmMaintAssocName | OCTET STRING (SIZE(1..45)) | current | Denotes a generic Maintenance Association Name. It is the part of the Maintenance Association Identifier which is unique within the Maintenance Domain Name and is appended to the Maintenance Domain Name to form the Main… |
| Dot1agCfmMaintAssocNameType | INTEGER { primaryVid (1), charString (2), unsignedInt16 (3), rfc2865VpnId (4) } | current | A value that represents a type (and thereby the format) of a Dot1agCfmMaintAssocName. The value can be one of the following: ieeeReserved(0) Reserved for definition by IEEE 802.1 recommend to not use zero unless absolut… |
| Dot1agCfmMaintDomainName | OCTET STRING (SIZE(1..43)) | current | Denotes a generic Maintenance Domain Name. A Dot1agCfmMaintDomainName value is always interpreted within the context of a Dot1agCfmMaintDomainNameType value. Every usage of the Dot1agCfmMaintDomainName textual conventio… |
| Dot1agCfmMaintDomainNameType | INTEGER { none (1), dnsLikeName (2), macAddressAndUint (3), charString (4) } | current | A value that represents a type (and thereby the format) of a Dot1agCfmMaintDomainName. The value can be one of the following: ieeeReserved(0) Reserved for definition by IEEE 802.1 recommend to not use zero unless absolu… |
| Dot1agCfmMaintenanceDomainLevel | Integer32 (-1 | 0..7) | current | Integer identifying the Maintenance Domain Level (MD Level). Higher numbers correspond to higher Maintenance Domains, those with the greatest physical reach, with the highest values for customers' CFM packets. Lower num… |
| Dot1agCfmMepId | Unsigned32 (1..8191) | current | Maintenance association End Point Identifier (MEPID): A small integer, unique over a given Maintenance Association, identifying a specific MEP. |
| Dot1agCfmMepIdOrZero | Unsigned32 (0 | 1..8191) | current | Maintenance association End Point Identifier (MEPID): A small integer, unique over a given Maintenance Association, identifying a specific MEP. The special value 0 is allowed to indicate special cases, for example that … |
| Dot1agCfmMhfCreation | INTEGER { defMHFnone (1), defMHFdefault (2), defMHFexplicit (3) } | current | Indicates if the Management Entity can create MHFs. The valid values are: defMHFnone(1) No MHFs can be created for this VID. defMHFdefault(2) MHFs can be created on this VID on any Bridge port through which this VID can… |
| Dot1agCfmMpDirection | INTEGER { down (1), up (2) } | current | Indicates the direction in which the Maintenance association (MEP or MIP) faces on the bridge port: down(1) Sends Continuity Check Messages away from the MAC Relay Entity. up(2) Sends Continuity Check Messages towards t… |
| Dot1agCfmPortStatus | INTEGER { psNoPortStateTLV (0), psBlocked (1), psUp (2) } | current | An enumerated value from he Port Status TLV from the last CCM received from the last MEP. It indicates the ability of the Bridge Port on which the transmitting MEP resides to pass ordinary data, regardless of the status… |
| Dot1agCfmRelayActionFieldValue | INTEGER { rlyHit (1), rlyFdb (2), rlyMpdb (3) } | current | Possible values the Relay action field can take. |