MIB Viewer

IEEE8023-DOT3-LLDP-EXT-V2-MIB

81 objects
The LLDP Management Information Base extension module for IEEE 802.3 organizationally defined discovery information.
Imported Objects
IF-MIBifGeneralInformationGroup
LLDP-V2-MIBlldpV2LocPortIfIndex lldpV2PortConfigEntry lldpV2RemIndex lldpV2RemLocalDestMACAddress lldpV2RemLocalIfIndex lldpV2RemTimeMark
LLDP-V2-TC-MIBtxt LldpV2PowerPortClass
SNMPv2-CONFMODULE-COMPLIANCE OBJECT-GROUP
SNMPv2-SMIInteger32 MODULE-IDENTITY OBJECT-TYPE org Unsigned32
SNMPv2-TCTruthValue
OIDNameAccessStatusDescription
1.3.111.2.1.5Identityieee8023lldpV2Xdot3MIBThe LLDP Management Information Base extension module for IEEE 802.3 organizationally defined discovery information.
1.3.111.2.1.5.1NodelldpV2Xdot3Objects
1.3.111.2.1.5.1.1NodelldpV2Xdot3Config
1.3.111.2.1.5.1.1.1TablelldpV2Xdot3PortConfigTablenot-accessiblecurrentA table that controls selection of LLDP TLVs to be transmitted on individual ports.
1.3.111.2.1.5.1.1.1.1RowlldpV2Xdot3PortConfigEntrynot-accessiblecurrentLLDP configuration information that controls the transmission of IEEE 802.3 organizationally defined TLVs on LLDP transmission capable ports. This configuratio…
1.3.111.2.1.5.1.1.1.1.1ColumnlldpV2Xdot3PortConfigTLVsTxEnableread-writecurrentThe lldpV2Xdot3PortConfigTLVsTxEnable, defined as a bitmap, includes the IEEE 802.3 organizationally defined set of LLDP TLVs whose transmission is allowed by …
1.3.111.2.1.5.1.2NodelldpV2Xdot3LocalData
1.3.111.2.1.5.1.2.1TablelldpV2Xdot3LocPortTablenot-accessiblecurrentThis table contains one row per port of Ethernet port information (as a part of the LLDP 802.3 organizational extension) on the local system known to this agen…
1.3.111.2.1.5.1.2.1.1RowlldpV2Xdot3LocPortEntrynot-accessiblecurrentInformation about a particular port component.
1.3.111.2.1.5.1.2.1.1.1ColumnlldpV2Xdot3LocPortAutoNegSupportedread-onlycurrentThe truth value used to indicate whether the given port (associated with the local system) supports Auto-negotiation.
1.3.111.2.1.5.1.2.1.1.2ColumnlldpV2Xdot3LocPortAutoNegEnabledread-onlycurrentThe truth value used to indicate whether port Auto-negotiation is enabled on the given port associated with the local system.
1.3.111.2.1.5.1.2.1.1.3ColumnlldpV2Xdot3LocPortAutoNegAdvertisedCapread-onlycurrentThis object contains the value (bitmap) of the ifMauAutoNegCapAdvertisedBits object (defined in IETF RFC 3636) which is associated with the given port on the l…
1.3.111.2.1.5.1.2.1.1.4ColumnlldpV2Xdot3LocPortOperMauTyperead-onlycurrentAn integer value that indicates the operational MAU type of the given port on the local system. This object contains the integer value derived from the list po…
1.3.111.2.1.5.1.2.2TablelldpV2Xdot3LocPowerTablenot-accessiblecurrentThis table contains one row per port of power Ethernet information (as a part of the LLDP IEEE 802.3 organizational extension) on the local system known to thi…
1.3.111.2.1.5.1.2.2.1RowlldpV2Xdot3LocPowerEntrynot-accessiblecurrentInformation about a particular port component.
1.3.111.2.1.5.1.2.2.1.1ColumnlldpV2Xdot3LocPowerPortClassread-onlycurrentThe value that identifies the port Class of the given port associated with the local system.
1.3.111.2.1.5.1.2.2.1.2ColumnlldpV2Xdot3LocPowerMDISupportedread-onlycurrentThe truth value used to indicate whether the MDI power is supported on the given port associated with the local system.
1.3.111.2.1.5.1.2.2.1.3ColumnlldpV2Xdot3LocPowerMDIEnabledread-onlycurrentThe truth value used to identify whether MDI power is enabled on the given port associated with the local system.
1.3.111.2.1.5.1.2.2.1.4ColumnlldpV2Xdot3LocPowerPairControlableread-onlycurrentThe truth value is derived from the value of pethPsePortPowerPairsControlAbility object (defined in Clause 8) and is used to indicate whether the pair selectio…
1.3.111.2.1.5.1.2.2.1.5ColumnlldpV2Xdot3LocPowerPairsread-onlycurrentThis object contains the value of the pethPsePortPowerPairs object (defined in Clause 8) which is associated with the given port on the local system.
1.3.111.2.1.5.1.2.2.1.6ColumnlldpV2Xdot3LocPowerClassread-onlycurrentThis object contains the value of the pethPsePortPowerClassifications object (defined in Clause 8) which is associated with the given port on the local system.
1.3.111.2.1.5.1.2.2.1.7ColumnlldpV2Xdot3LocPowerTyperead-onlycurrentA GET returns an integer indicating whether the local system is a PSE or a PD and whether it is Type 1 or Type 2.
1.3.111.2.1.5.1.2.2.1.8ColumnlldpV2Xdot3LocPowerSourceread-onlycurrentA GET returns an integer indicating the power sources of the local system. A PSE indicates whether it is being powered by a primary power source; a backup powe…
1.3.111.2.1.5.1.2.2.1.9ColumnlldpV2Xdot3LocPowerPriorityread-writecurrentA GET returns the priority of a PD system. For a PSE, this is the priority that the PSE assigns to the PD. For a PD, this is the priority that the PD requests …
1.3.111.2.1.5.1.2.2.1.10ColumnlldpV2Xdot3LocPDRequestedPowerValueread-onlycurrentA GET returns the PD requested power value. For a PD, it is the power value that the PD has currently requested from the remote system. PD requested power valu…
1.3.111.2.1.5.1.2.2.1.11ColumnlldpV2Xdot3LocPSEAllocatedPowerValueread-onlycurrentA GET returns the PSE allocated power value. For a PSE, it is the power value that the PSE has currently allocated to the remote system. The PSE allocated powe…
1.3.111.2.1.5.1.2.2.1.12ColumnlldpV2Xdot3LocResponseTimeread-onlycurrentA GET returns the response time in seconds of the local system. For a PD, it is the maximum time required to update the value of lldpV2Xdot3LocPDRequestedPower…
1.3.111.2.1.5.1.2.2.1.13ColumnlldpV2Xdot3LocReadyread-onlycurrentThe truth value used to identify whether the local Data Link Layer classification engine has completed initialization and is ready to receive and transmit LLDP…
1.3.111.2.1.5.1.2.2.1.14ColumnlldpV2Xdot3LocReducedOperationPowerValueread-onlycurrentA GET returns the reduced operation power value. For a PD, it is a power value that is lower than the currently requested power value. This reduced operation p…
1.3.111.2.1.5.1.2.3TablelldpV2Xdot3LocMaxFrameSizeTablenot-accessiblecurrentThis table contains one row per port of maximum frame size information (as a part of the LLDP IEEE 802.3 organizational extension) on the local system known to…
1.3.111.2.1.5.1.2.3.1RowlldpV2Xdot3LocMaxFrameSizeEntrynot-accessiblecurrentMaximum Frame Size information about a particular port component.
1.3.111.2.1.5.1.2.3.1.1ColumnlldpV2Xdot3LocMaxFrameSizeread-onlycurrentAn integer value indicating the maximum supported frame size in octets on the given port of the local system.
1.3.111.2.1.5.1.2.4TablelldpV2Xdot3LocEEETablenot-accessiblecurrentThis table contains one row per port of Energy Efficient Ethernet information (as a part of the LLDP IEEE 802.3 organizational extension) on the local system k…
1.3.111.2.1.5.1.2.4.1RowlldpV2Xdot3LocEEEEntrynot-accessiblecurrentInformation about a particular port component.
1.3.111.2.1.5.1.2.4.1.1ColumnlldpV2Xdot3LocTxTwSysread-onlycurrentA GET returns the value of Tw_sys_tx that the local system can support in the transmit direction. This object maps to the variable LocTxSystemValue as defined …
1.3.111.2.1.5.1.2.4.1.2ColumnlldpV2Xdot3LocTxTwSysEchoread-onlycurrentA GET returns the value of Tw_sys_tx that the remote system is advertising that it can support in the transmit direction and is echoed by the local system unde…
1.3.111.2.1.5.1.2.4.1.3ColumnlldpV2Xdot3LocRxTwSysread-onlycurrentA GET returns the value of Tw_sys_tx that the local system is requesting in the receive direction. This object maps to the variable LocRxSystemValue as defined…
1.3.111.2.1.5.1.2.4.1.4ColumnlldpV2Xdot3LocRxTwSysEchoread-onlycurrentA GET returns the value of Tw_sys_tx that the remote system is advertising that it is requesting in the receive direction and is echoed by the local system und…
1.3.111.2.1.5.1.2.4.1.5ColumnlldpV2Xdot3LocFbTwSysread-onlycurrentA GET returns the value of the fallback Tw_sys_tx that the local system is advertising to the remote system. This object maps to the variable LocFbSystemValue …
1.3.111.2.1.5.1.2.4.1.6ColumnlldpV2Xdot3TxDllReadyread-onlycurrentThe truth value used to identify whether the local Data Link Layer EEE layer management function has completed initialization and is ready to receive and trans…
1.3.111.2.1.5.1.2.4.1.7ColumnlldpV2Xdot3RxDllReadyread-onlycurrentThe truth value used to identify whether the local Data Link Layer EEE layer management function has completed initialization and is ready to receive and trans…
1.3.111.2.1.5.1.2.4.1.8ColumnlldpV2Xdot3LocDllEnabledread-onlycurrentThe truth value used to identify whether the local system has completed auto-negotiation with a link partner that has indicated at leat one EEE capability.
1.3.111.2.1.5.1.3NodelldpV2Xdot3RemoteData
1.3.111.2.1.5.1.3.1TablelldpV2Xdot3RemPortTablenot-accessiblecurrentThis table contains Ethernet port information (as a part of the LLDP IEEE 802.3 organizational extension) of the remote system.
1.3.111.2.1.5.1.3.1.1RowlldpV2Xdot3RemPortEntrynot-accessiblecurrentInformation about a particular physical network connection.
1.3.111.2.1.5.1.3.1.1.1ColumnlldpV2Xdot3RemPortAutoNegSupportedread-onlycurrentThe truth value used to indicate whether the given port (associated with remote system) supports Auto-negotiation.
1.3.111.2.1.5.1.3.1.1.2ColumnlldpV2Xdot3RemPortAutoNegEnabledread-onlycurrentThe truth value used to indicate whether port Auto-negotiation is enabled on the given port associated with the remote system.
1.3.111.2.1.5.1.3.1.1.3ColumnlldpV2Xdot3RemPortAutoNegAdvertisedCapread-onlycurrentThis object contains the value (bitmap) of the ifMauAutoNegCapAdvertisedBits object (defined in IETF RFC 3636) which is associated with the given port on the r…
1.3.111.2.1.5.1.3.1.1.4ColumnlldpV2Xdot3RemPortOperMauTyperead-onlycurrentAn integer value that indicates the operational MAU type of the sending device. This object contains the integer value derived from the list position of the co…
1.3.111.2.1.5.1.3.2TablelldpV2Xdot3RemPowerTablenot-accessiblecurrentThis table contains Ethernet power information (as a part of the LLDP IEEE 802.3 organizational extension) of the remote system.
1.3.111.2.1.5.1.3.2.1RowlldpV2Xdot3RemPowerEntrynot-accessiblecurrentInformation about a particular physical network connection.
1.3.111.2.1.5.1.3.2.1.1ColumnlldpV2Xdot3RemPowerPortClassread-onlycurrentThe value that identifies the port Class of the given port associated with the remote system.
1.3.111.2.1.5.1.3.2.1.2ColumnlldpV2Xdot3RemPowerMDISupportedread-onlycurrentThe truth value used to indicate whether the MDI power is supported on the given port associated with the remote system.
1.3.111.2.1.5.1.3.2.1.3ColumnlldpV2Xdot3RemPowerMDIEnabledread-onlycurrentThe truth value used to identify whether MDI power is enabled on the given port associated with the remote system.
1.3.111.2.1.5.1.3.2.1.4ColumnlldpV2Xdot3RemPowerPairControlableread-onlycurrentThe truth value is derived from the value of pethPsePortPowerPairsControlAbility object (defined in Clause 8) and is used to indicate whether the pair selectio…
1.3.111.2.1.5.1.3.2.1.5ColumnlldpV2Xdot3RemPowerPairsread-onlycurrentThis object contains the value of the pethPsePortPowerPairs object (defined in Clause 8) which is associated with the given port on the remote system.
1.3.111.2.1.5.1.3.2.1.6ColumnlldpV2Xdot3RemPowerClassread-onlycurrentThis object contains the value of the pethPsePortPowerClassifications object (defined in Clause 8) which is associated with the given port on the remote system.
1.3.111.2.1.5.1.3.2.1.7ColumnlldpV2Xdot3RemPowerTyperead-onlycurrentA GET returns an integer indicating whether the remote system is a PSE or a PD and whether it is Type 1 or Type 2.
1.3.111.2.1.5.1.3.2.1.8ColumnlldpV2Xdot3RemPowerSourceread-onlycurrentA GET returns an integer indicating the power sources of the remote system. When the remote system is a PSE, it indicates whether it is being powered by a prim…
1.3.111.2.1.5.1.3.2.1.9ColumnlldpV2Xdot3RemPowerPriorityread-writecurrentA GET returns the priority of a PD system. For a PSE, this is the priority that the remote system requests. For a PD, this is the priority that the remote syst…
1.3.111.2.1.5.1.3.2.1.10ColumnlldpV2Xdot3RemPDRequestedPowerValueread-onlycurrentA GET returns the PD requested power value that was used by the remote system to compute the power value that is has currently allocated to the PD. For a PSE, …
1.3.111.2.1.5.1.3.2.1.11ColumnlldpV2Xdot3RemPSEAllocatedPowerValueread-onlycurrentA GET returns the PSE allocated power value received from the remote system. For a PSE, it is the PSE allocated power value that was used by the remote system …
1.3.111.2.1.5.1.3.3TablelldpV2Xdot3RemMaxFrameSizeTablenot-accessiblecurrentThis table contains one row per port/destination address pair of maximum frame size information (as a part of the LLDP IEEE 802.3 organizational extension) of …
1.3.111.2.1.5.1.3.3.1RowlldpV2Xdot3RemMaxFrameSizeEntrynot-accessiblecurrentMaximum Frame Size information about a particular port component.
1.3.111.2.1.5.1.3.3.1.1ColumnlldpV2Xdot3RemMaxFrameSizeread-onlycurrentAn integer value indicating the maximum supported frame size in octets on the port component associated with the remote system.
1.3.111.2.1.5.1.3.4TablelldpV2Xdot3RemEEETablenot-accessiblecurrentThis table contains one row per port of Energy Efficient Ethernet information (as a part of the LLDP IEEE 802.3 organizational extension) on the local system k…
1.3.111.2.1.5.1.3.4.1RowlldpV2Xdot3RemEEEEntrynot-accessiblecurrentInformation about a particular port component.
1.3.111.2.1.5.1.3.4.1.1ColumnlldpV2Xdot3RemTxTwSysread-onlycurrentA GET returns the value of Tw_sys_tx that the remote system can support in the transmit direction. This object maps to the variable RemTxSystemValue as defined…
1.3.111.2.1.5.1.3.4.1.2ColumnlldpV2Xdot3RemTxTwSysEchoread-onlycurrentA GET returns the value of Tw_sys_tx that the local system is advertising that it can support in the transmit direction as echoed by the remote system under th…
1.3.111.2.1.5.1.3.4.1.3ColumnlldpV2Xdot3RemRxTwSysread-onlycurrentA GET returns the value of Tw_sys_tx that the remote system is requesting in the receive direction. This object maps to the variable RemRxSystemValue as define…
1.3.111.2.1.5.1.3.4.1.4ColumnlldpV2Xdot3RemRxTwSysEchoread-onlycurrentA GET returns the value of Tw_sys_tx that the local system is advertising that it is requesting in the receive direction and is echoed by the remote system und…
1.3.111.2.1.5.1.3.4.1.5ColumnlldpV2Xdot3RemFbTwSysread-onlycurrentA GET returns the value of the fallback Tw_sys_tx that the remote system is advertising. This object maps to the variable RemFbSystemValue as defined in IEEE S…
1.3.111.2.1.5.2NodelldpV2Xdot3Conformance
1.3.111.2.1.5.2.1NodelldpV2Xdot3Compliances
1.3.111.2.1.5.2.1.1CompliancelldpV2Xdot3TxRxCompliancecurrentA compliance statement for SNMP entities that implement the LLDP IEEE 802.3 organizational extension MIB. This group is mandatory for all agents that implement…
1.3.111.2.1.5.2.1.2CompliancelldpV2Xdot3TxCompliancecurrentThe compliance statement for SNMP entities that implement the LLDP IEEE 802.3 organizational extension MIB. This group is mandatory for agents that implement t…
1.3.111.2.1.5.2.1.3CompliancelldpV2Xdot3RxCompliancecurrentThe compliance statement for SNMP entities that implement the LLDP IEEE 802.3 organizational extension MIB. This group is mandatory for agents that implement t…
1.3.111.2.1.5.2.2NodelldpV2Xdot3Groups
1.3.111.2.1.5.2.2.1GrouplldpV2Xdot3ConfigGroupcurrentThe collection of objects that are used to configure the LLDP IEEE 802.3 organizational extension implementation behavior.
1.3.111.2.1.5.2.2.2GrouplldpV2Xdot3LocSysGroupcurrentThe collection of objects that are used to represent LLDP IEEE 802.3 organizational extension Local Device Information.
1.3.111.2.1.5.2.2.3GrouplldpV2Xdot3RemSysGroupcurrentThe collection of objects that are used to represent LLDP IEEE 802.3 organizational extension Local Device Information.