IES5206-MIB
2650 objects
The file contains the private MIB defition for product IES5206/5212/6217.
Imported Objects
| BRIDGE-MIB | BridgeId dot1dBasePort MacAddress Timeout |
| GBOND-MIB MISSING | -- RFC5650 -- GBondScheme -- |
| INET-ADDRESS-MIB | InetAddress InetAddressIPv6 InetAddressType |
| P-BRIDGE-MIB | EnabledStatus |
| Q-BRIDGE-MIB | dot1qVlanIndex PortList VlanIndex |
| RFC1213-MIB | DisplayString ifIndex PhysAddress |
| SNMP-FRAMEWORK-MIB | SnmpAdminString |
| SNMPv2-SMI | Counter32 Counter64 enterprises Gauge32 IpAddress NOTIFICATION-TYPE OBJECT-TYPE TimeTicks Unsigned32 |
| SNMPv2-TC | RowStatus TEXTUAL-CONVENTION TruthValue |
| VDSL2-LINE-TC-MIB MISSING | -- RFC2851 Xdsl2Unit |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.890 | Nodezyxel | |||
| 1.3.6.1.4.1.890.1 | Nodeproducts | |||
| 1.3.6.1.4.1.890.1.5 | NodeaccessSwitch | |||
| 1.3.6.1.4.1.890.1.5.13 | NodeiesSeries | |||
| 1.3.6.1.4.1.890.1.5.13.13 | Identityies5206 | The file contains the private MIB defition for product IES5206/5212/6217. | ||
| 1.3.6.1.4.1.890.1.5.13.13.1 | Nodeacl | |||
| 1.3.6.1.4.1.890.1.5.13.13.1.3 | ScalaraclMaxNumOfAclPerPort | read-only | current | The maximum number of ACL per port. |
| 1.3.6.1.4.1.890.1.5.13.13.1.4 | TableaclPortTable | not-accessible | current | Configures references to specified ACL rule for the specified port. |
| 1.3.6.1.4.1.890.1.5.13.13.1.4.1 | RowaclPortEntry | not-accessible | current | A table entry to assign an interface port with ACL profile. |
| 1.3.6.1.4.1.890.1.5.13.13.1.4.1.1 | ColumnaclPortProfileName | read-only | current | Configures references to specified ACL rule. |
| 1.3.6.1.4.1.890.1.5.13.13.1.4.1.2 | ColumnaclPortRowStatus | read-create | current | Row status of the table entry. |
| 1.3.6.1.4.1.890.1.5.13.13.1.4.1.3 | ColumnaclPortProfilePriority | read-only | current | Configures priority of specified ACL rule in this port. ACL rules in a port can not assign to same priority(per-port mode). If priority is 0, it mean no priori… |
| 1.3.6.1.4.1.890.1.5.13.13.1.5 | ScalaraclMaxNumOfAclProfiles | read-only | current | The maximum number of ACL profiles supported by the system. |
| 1.3.6.1.4.1.890.1.5.13.13.1.6 | TableaclProfileTable | not-accessible | current | Configures ACL profile. |
| 1.3.6.1.4.1.890.1.5.13.13.1.6.1 | RowaclProfileEntry | not-accessible | current | A table entry for ACL profile table. |
| 1.3.6.1.4.1.890.1.5.13.13.1.6.1.1 | ColumnaclProfileName | read-only | current | Name of ACL profile. |
| 1.3.6.1.4.1.890.1.5.13.13.1.6.1.3 | ColumnaclProfileFieldMask | read-create | current | Defines the compared fields mask for the ACL profile. Every field mask bit has its own referenced field parameter(s). etherType(0) - aclProfileRuleEtype source… |
| 1.3.6.1.4.1.890.1.5.13.13.1.6.1.4 | ColumnaclProfileRuleEtype | read-create | current | Matches specified Ether Type. |
| 1.3.6.1.4.1.890.1.5.13.13.1.6.1.5 | ColumnaclProfileRuleSrcMac | read-create | current | Matches specified source MAC. |
| 1.3.6.1.4.1.890.1.5.13.13.1.6.1.6 | ColumnaclProfileRuleDestMac | read-create | current | Matches specified destination MAC. |
| 1.3.6.1.4.1.890.1.5.13.13.1.6.1.7 | ColumnaclProfileRuleSrcOui | read-create | current | Matches specified source MAC OUI. |
| 1.3.6.1.4.1.890.1.5.13.13.1.6.1.8 | ColumnaclProfileRuleDestOui | read-create | current | Matches specified destination MAC OUI. |
| 1.3.6.1.4.1.890.1.5.13.13.1.6.1.9 | ColumnaclProfileRuleInnerVlan | read-create | current | Matches specified inner VLAN List. |
| 1.3.6.1.4.1.890.1.5.13.13.1.6.1.10 | ColumnaclProfileRuleOuterVlan | read-create | current | Matches specified outer VLAN List. |
| 1.3.6.1.4.1.890.1.5.13.13.1.6.1.11 | ColumnaclProfileRuleInnerPbit | read-create | current | Matches specified inner VLAN PBIT. |
| 1.3.6.1.4.1.890.1.5.13.13.1.6.1.12 | ColumnaclProfileRuleOuterPbit | read-create | current | Matches specified outer VLAN PBIT. |
| 1.3.6.1.4.1.890.1.5.13.13.1.6.1.13 | ColumnaclProfileRuleSrcIpRange | read-create | current | Matches specified source IP range. |
| 1.3.6.1.4.1.890.1.5.13.13.1.6.1.14 | ColumnaclProfileRuleSrcIpMask | read-create | current | The subnet mask of source IP range. |
| 1.3.6.1.4.1.890.1.5.13.13.1.6.1.15 | ColumnaclProfileRuleDestIpRange | read-create | current | Matches specified destination IP range. |
| 1.3.6.1.4.1.890.1.5.13.13.1.6.1.16 | ColumnaclProfileRuleDestIpMask | read-create | current | The subnet mask of destination IP range. |
| 1.3.6.1.4.1.890.1.5.13.13.1.6.1.17 | ColumnaclProfileRuleSrcIp | read-create | current | Matches specified source IP address. |
| 1.3.6.1.4.1.890.1.5.13.13.1.6.1.18 | ColumnaclProfileRuleDestIp | read-create | current | Matches specified destination IP address. |
| 1.3.6.1.4.1.890.1.5.13.13.1.6.1.19 | ColumnaclProfileRuleProtocol | read-create | current | Matches specified IP protocol. |
| 1.3.6.1.4.1.890.1.5.13.13.1.6.1.20 | ColumnaclProfileRuleIpPrecedence | read-create | current | Matches specified IP precedence. |
| 1.3.6.1.4.1.890.1.5.13.13.1.6.1.21 | ColumnaclProfileRuleDscp | read-create | current | Matches specified IP DSCP. |
| 1.3.6.1.4.1.890.1.5.13.13.1.6.1.22 | ColumnaclProfileRuleSrcIpv6 | read-create | current | Matches specified source IPv6 address. |
| 1.3.6.1.4.1.890.1.5.13.13.1.6.1.23 | ColumnaclProfileRuleDestIpv6 | read-create | current | Matches specified destination IPv6 address. |
| 1.3.6.1.4.1.890.1.5.13.13.1.6.1.24 | ColumnaclProfileRuleNextHeader | read-create | current | Matches specified IPv6 next header. |
| 1.3.6.1.4.1.890.1.5.13.13.1.6.1.25 | ColumnaclProfileRuleTrafficClass | read-create | current | Matches specified IPv6 traffic class. |
| 1.3.6.1.4.1.890.1.5.13.13.1.6.1.26 | ColumnaclProfileRuleSrcL4StartPort | read-create | current | Matches specified layer 4 source port range. |
| 1.3.6.1.4.1.890.1.5.13.13.1.6.1.27 | ColumnaclProfileRuleSrcL4EndPort | read-create | current | Matches specified layer 4 source port range. |
| 1.3.6.1.4.1.890.1.5.13.13.1.6.1.28 | ColumnaclProfileRuleDestL4StartPort | read-create | current | Matches specified layer 4 dest port range. |
| 1.3.6.1.4.1.890.1.5.13.13.1.6.1.29 | ColumnaclProfileRuleDestL4EndPort | read-create | current | Matches specified layer 4 dest port range. |
| 1.3.6.1.4.1.890.1.5.13.13.1.6.1.30 | ColumnaclProfileRuleSrcL4Port | read-create | current | Matches specified layer 4 source port. |
| 1.3.6.1.4.1.890.1.5.13.13.1.6.1.31 | ColumnaclProfileRuleDestL4Port | read-create | current | Matches specified layer 4 dest port. |
| 1.3.6.1.4.1.890.1.5.13.13.1.6.1.38 | ColumnaclProfileRowStatus | read-create | current | Row status of the table entry. |
| 1.3.6.1.4.1.890.1.5.13.13.1.7 | NodeaclMulticast | |||
| 1.3.6.1.4.1.890.1.5.13.13.1.7.1 | ScalaraclUnsolicited | read-write | current | Control filter to drop unknown multicast traffic Drop unknown multicast traffic(1) No drop unknown multicast traffic(2) |
| 1.3.6.1.4.1.890.1.5.13.13.1.7.2 | ScalaraclUpstream | read-write | current | Control filter to drop unknown multicast traffic from upstream direction Drop multicast traffic from upstream direction (1) No drop multicast traffic from upst… |
| 1.3.6.1.4.1.890.1.5.13.13.1.7.3 | ScalaraclIpv6PassThrough | read-write | current | Set IPv6 packet transparent passthrough. |
| 1.3.6.1.4.1.890.1.5.13.13.1.7.4 | TableaclBpduCtrlTable | not-accessible | current | Configures BPDU control. |
| 1.3.6.1.4.1.890.1.5.13.13.1.7.4.1 | RowaclBpduCtrlEntry | not-accessible | current | A table entry for BPDU control table. |
| 1.3.6.1.4.1.890.1.5.13.13.1.7.4.1.1 | ColumnbpduCtrlMode | read-write | current | Configure BPDU control mode |
| 1.3.6.1.4.1.890.1.5.13.13.1.7.5 | ScalaraclReserve | read-write | current | Reserved multicast packet control |
| 1.3.6.1.4.1.890.1.5.13.13.1.8 | NodeaclStormControl | |||
| 1.3.6.1.4.1.890.1.5.13.13.1.8.4 | TableaclStormControlTable | not-accessible | current | Configures ACL storm control. |
| 1.3.6.1.4.1.890.1.5.13.13.1.8.4.1 | RowaclStormControlEntry | not-accessible | current | A table entry for ACL storm control table. |
| 1.3.6.1.4.1.890.1.5.13.13.1.8.4.1.1 | ColumnaclPortBroadcast | read-write | current | Configure rate limit for broadcast storm range depends on line card type MSC: 0~10000000 kbps GLC: 0~1000000 kbps GPON: 0~262143 kbps VLC: 2~100000 kbps (Granu… |
| 1.3.6.1.4.1.890.1.5.13.13.1.8.4.1.2 | ColumnaclPortDlf | read-write | current | Configure rate limit for DLF (unknown unicast) storm range depends on line card type MSC: 0~10000000 kbps GLC: 0~1000000 kbps GPON: 0~262143 kbps VLC: 2~100000… |
| 1.3.6.1.4.1.890.1.5.13.13.1.8.4.1.3 | ColumnaclPortMulticast | read-write | current | Configure rate limit for unknown multicast storm range depends on line card type MSC: 0~10000000 kbps GLC: 0~1000000 kbps GPON: 0~262143 kbps VLC: 2~100000 kbp… |
| 1.3.6.1.4.1.890.1.5.13.13.1.9 | TableaclProfileActionTable | not-accessible | current | Configures ACL profile action. |
| 1.3.6.1.4.1.890.1.5.13.13.1.9.1 | RowaclProfileActionEntry | not-accessible | current | An entry to configure actions regarding to classifier (acl profile). |
| 1.3.6.1.4.1.890.1.5.13.13.1.9.1.1 | ColumnaclProfileActionMask | read-create | current | Defines action(s) for the ACL profile. Every acktion mask bit has its own referenced action parameter(s). drop(0) - no action paramter rateLimit(1) - aclProfil… |
| 1.3.6.1.4.1.890.1.5.13.13.1.9.1.4 | ColumnaclProfileActionOuterPbit | read-create | current | Change outer VLAN pbit of matched packets. |
| 1.3.6.1.4.1.890.1.5.13.13.1.9.1.5 | ColumnaclProfileActionDscp | read-create | current | Change IP DSCP of matched packets. |
| 1.3.6.1.4.1.890.1.5.13.13.1.9.1.7 | ColumnaclProfileActionQos | read-create | current | Change Qos of matched packets. |
| 1.3.6.1.4.1.890.1.5.13.13.1.9.1.8 | ColumnaclProfileActionRateCir | read-create | current | CIR threshold of this ACL profile. |
| 1.3.6.1.4.1.890.1.5.13.13.1.9.1.9 | ColumnaclProfileActionRateCbs | read-create | current | CBS threshold of this ACL profile. |
| 1.3.6.1.4.1.890.1.5.13.13.1.9.1.10 | ColumnaclProfileActionRateEir | read-create | current | EIR threshold of this ACL profile. |
| 1.3.6.1.4.1.890.1.5.13.13.1.9.1.11 | ColumnaclProfileActionRateEbs | read-create | current | EBS threshold of this ACL profile. |
| 1.3.6.1.4.1.890.1.5.13.13.1.10 | ScalaraclMaxNumOfAclEgressPerPort | read-only | current | The maximum number of ACL egress profiles per port. |
| 1.3.6.1.4.1.890.1.5.13.13.1.11 | TableaclEgressPortTable | not-accessible | current | Configures references to specified ACL egress rule for the specified port. |
| 1.3.6.1.4.1.890.1.5.13.13.1.11.1 | RowaclEgressPortEntry | not-accessible | current | A table entry to assign an interface port with ACL egress profile. |
| 1.3.6.1.4.1.890.1.5.13.13.1.11.1.1 | ColumnaclEgressPortProfileName | read-only | current | Configures references to specified ACL egress rule. |
| 1.3.6.1.4.1.890.1.5.13.13.1.11.1.2 | ColumnaclEgressPortRowStatus | read-create | current | Row status of the table entry. |
| 1.3.6.1.4.1.890.1.5.13.13.1.11.1.3 | ColumnaclEgressPortProfilePriority | read-only | current | Configures priority of specified ACL rule in this port. ACL egress rules in a port can not assign to same priority. |
| 1.3.6.1.4.1.890.1.5.13.13.1.12 | ScalaraclMaxNumOfAclEgressProfiles | read-only | current | The maximum number of ACL egress profiles supported by the system. |
| 1.3.6.1.4.1.890.1.5.13.13.1.13 | TableaclEgressProfileTable | not-accessible | current | Configures ACL egress profile. |
| 1.3.6.1.4.1.890.1.5.13.13.1.13.1 | RowaclEgressProfileEntry | not-accessible | current | A table entry for ACL egress profile table. |
| 1.3.6.1.4.1.890.1.5.13.13.1.13.1.1 | ColumnaclEgressProfileName | read-only | current | Name of ACL egress profile. |
| 1.3.6.1.4.1.890.1.5.13.13.1.13.1.3 | ColumnaclEgressProfileFieldMask | read-create | current | Defines the compared fields mask for the ACL profile. Every field mask bit has its own referenced field parameter(s). etherType(0) - aclEgressProfileRuleEtype … |
| 1.3.6.1.4.1.890.1.5.13.13.1.13.1.4 | ColumnaclEgressProfileRuleEtype | read-create | current | Matches specified Ether Type. |
| 1.3.6.1.4.1.890.1.5.13.13.1.13.1.5 | ColumnaclEgressProfileRuleSrcMac | read-create | current | Matches specified source MAC. |
| 1.3.6.1.4.1.890.1.5.13.13.1.13.1.6 | ColumnaclEgressProfileRuleDestMac | read-create | current | Matches specified destination MAC. |
| 1.3.6.1.4.1.890.1.5.13.13.1.13.1.7 | ColumnaclEgressProfileRuleSrcOui | read-create | current | Matches specified source MAC OUI. |
| 1.3.6.1.4.1.890.1.5.13.13.1.13.1.8 | ColumnaclEgressProfileRuleDestOui | read-create | current | Matches specified destination MAC OUI. |
| 1.3.6.1.4.1.890.1.5.13.13.1.13.1.10 | ColumnaclEgressProfileRuleUniVlan | read-create | current | Matches specified outer VLAN list. |
| 1.3.6.1.4.1.890.1.5.13.13.1.13.1.12 | ColumnaclEgressProfileRuleUniPbit | read-create | current | Matches specified outer VLAN PBIT. |
| 1.3.6.1.4.1.890.1.5.13.13.1.13.1.13 | ColumnaclEgressProfileRuleSrcIpRange | read-create | current | Matches specified source IP range. |
| 1.3.6.1.4.1.890.1.5.13.13.1.13.1.14 | ColumnaclEgressProfileRuleSrcIpMask | read-create | current | The subnet mask of source IP range. |
| 1.3.6.1.4.1.890.1.5.13.13.1.13.1.15 | ColumnaclEgressProfileRuleDestIpRange | read-create | current | Matches specified destination IP range. |
| 1.3.6.1.4.1.890.1.5.13.13.1.13.1.16 | ColumnaclEgressProfileRuleDestIpMask | read-create | current | The subnet mask of destination IP range. |
| 1.3.6.1.4.1.890.1.5.13.13.1.13.1.17 | ColumnaclEgressProfileRuleSrcIp | read-create | current | Matches specified source IP address. |
| 1.3.6.1.4.1.890.1.5.13.13.1.13.1.18 | ColumnaclEgressProfileRuleDestIp | read-create | current | Matches specified destination IP address. |
| 1.3.6.1.4.1.890.1.5.13.13.1.13.1.19 | ColumnaclEgressProfileRuleProtocol | read-create | current | Matches specified IP protocol. |
| 1.3.6.1.4.1.890.1.5.13.13.1.13.1.20 | ColumnaclEgressProfileRuleIpPrecedence | read-create | current | Matches specified IP precedence. |
| 1.3.6.1.4.1.890.1.5.13.13.1.13.1.21 | ColumnaclEgressProfileRuleDscp | read-create | current | Matches specified IP DSCP. |
| 1.3.6.1.4.1.890.1.5.13.13.1.13.1.24 | ColumnaclEgressProfileRuleNextHeader | read-create | current | Matches specified IPv6 next header. |
| 1.3.6.1.4.1.890.1.5.13.13.1.13.1.25 | ColumnaclEgressProfileRuleTrafficClass | read-create | current | Matches specified IPv6 traffic class. |
| 1.3.6.1.4.1.890.1.5.13.13.1.13.1.26 | ColumnaclEgressProfileRuleSrcL4StartPort | read-create | current | Matches specified layer 4 source port range. |
| 1.3.6.1.4.1.890.1.5.13.13.1.13.1.27 | ColumnaclEgressProfileRuleSrcL4EndPort | read-create | current | Matches specified layer 4 source port range. |
| 1.3.6.1.4.1.890.1.5.13.13.1.13.1.28 | ColumnaclEgressProfileRuleDestL4StartPort | read-create | current | Matches specified layer 4 dest port range. |
| 1.3.6.1.4.1.890.1.5.13.13.1.13.1.29 | ColumnaclEgressProfileRuleDestL4EndPort | read-create | current | Matches specified layer 4 dest port range. |
| 1.3.6.1.4.1.890.1.5.13.13.1.13.1.30 | ColumnaclEgressProfileRuleSrcL4Port | read-create | current | Matches specified layer 4 source port. |
| 1.3.6.1.4.1.890.1.5.13.13.1.13.1.31 | ColumnaclEgressProfileRuleDestL4Port | read-create | current | Matches specified layer 4 dest port. |
| 1.3.6.1.4.1.890.1.5.13.13.1.13.1.38 | ColumnaclEgressProfileRowStatus | read-create | current | Row status of the table entry. |
| 1.3.6.1.4.1.890.1.5.13.13.1.14 | TableaclEgressProfileActionTable | not-accessible | current | Configures ACL egress profile action. |
| 1.3.6.1.4.1.890.1.5.13.13.1.14.1 | RowaclEgressProfileActionEntry | not-accessible | current | An entry to configure actions regarding to classifier (acl egress profile). |
| 1.3.6.1.4.1.890.1.5.13.13.1.14.1.1 | ColumnaclEgressProfileActionMask | read-create | current | Defines action(s) for the ACL egress profile. Every acktion mask bit has its own referenced action parameter(s). drop(0) - no action paramter changeOuterPbit(3… |
| 1.3.6.1.4.1.890.1.5.13.13.1.14.1.4 | ColumnaclEgressProfileActionUniPbit | read-create | current | Change outer VLAN pbit of matched packets. |
| 1.3.6.1.4.1.890.1.5.13.13.1.14.1.5 | ColumnaclEgressProfileActionDscp | read-create | current | Change IP DSCP of matched packets. |
| 1.3.6.1.4.1.890.1.5.13.13.1.17 | NodearpInspection | |||
| 1.3.6.1.4.1.890.1.5.13.13.1.17.1 | TablearpInspectionTable | not-accessible | current | Support ARP inspection to filter unauthorized ARP packets on the network. This can prevent many kinds of man-in-the-middle attacks. This table is supported by … |
| 1.3.6.1.4.1.890.1.5.13.13.1.17.1.1 | RowarpInspectionEntry | not-accessible | current | The entry of arpInspectionTable. |
| 1.3.6.1.4.1.890.1.5.13.13.1.17.1.1.1 | ColumnarpInspectionEnable | read-write | current | Enable/disable arp inspection on the specified subscriber port. |
| 1.3.6.1.4.1.890.1.5.13.13.1.17.2 | TablearpInspectFilterSetupTable | not-accessible | current | |
| 1.3.6.1.4.1.890.1.5.13.13.1.17.2.1 | RowarpInspectFilterSetupEntry | not-accessible | current | An entry in arpInspectFilterSetupTable. |
| 1.3.6.1.4.1.890.1.5.13.13.1.17.2.1.1 | ColumnarpInspectFilterSetupMac | read-write | current | The MAC address. |
| 1.3.6.1.4.1.890.1.5.13.13.1.17.2.1.2 | ColumnarpInspectFilterSetupVid | read-write | current | The VLAN ID. |
| 1.3.6.1.4.1.890.1.5.13.13.1.17.2.1.3 | ColumnarpInspectFilterSetupClear | read-write | current | Clear arp inspection Filter database. |
| 1.3.6.1.4.1.890.1.5.13.13.1.17.3 | TablearpInspectFilterTable | not-accessible | current | |
| 1.3.6.1.4.1.890.1.5.13.13.1.17.3.1 | RowarpInspectFilterEntry | not-accessible | current | An entry in arpInspectFilterTable. |
| 1.3.6.1.4.1.890.1.5.13.13.1.17.3.1.1 | ColumnarpInspectFilterId | read-only | current | The index. |
| 1.3.6.1.4.1.890.1.5.13.13.1.17.3.1.2 | ColumnarpInspectFilterMac | read-only | current | The MAC address. |
| 1.3.6.1.4.1.890.1.5.13.13.1.17.3.1.3 | ColumnarpInspectFilterVid | read-only | current | The VLAN ID. |
| 1.3.6.1.4.1.890.1.5.13.13.1.17.3.1.4 | ColumnarpInspectFilterExpiry | read-only | current | The expiry time represents how long (in seconds) the MAC address filter remains in the Switch. |
| 1.3.6.1.4.1.890.1.5.13.13.1.17.3.1.5 | ColumnarpInspectFilterReason | read-only | current | The reason why the ARP packet was discarded. |
| 1.3.6.1.4.1.890.1.5.13.13.1.18 | NodemacFF | |||
| 1.3.6.1.4.1.890.1.5.13.13.1.18.1 | TablemacFFProfileTable | not-accessible | current | MAC force forwarding profile configuration table. |
| 1.3.6.1.4.1.890.1.5.13.13.1.18.1.1 | RowmacFFProfile | not-accessible | current | MAC force forwarding profile configuration table. |
| 1.3.6.1.4.1.890.1.5.13.13.1.18.1.1.1 | ColumnmacFFProfileName | read-only | current | Profile name |
| 1.3.6.1.4.1.890.1.5.13.13.1.18.1.1.2 | ColumnmacFFProfileRowStatus | read-create | current | |
| 1.3.6.1.4.1.890.1.5.13.13.1.18.2 | TablemacFFEntryTable | not-accessible | current | MAC force forwarding entry configuration table. |
| 1.3.6.1.4.1.890.1.5.13.13.1.18.2.1 | RowmacFFEntry | not-accessible | current | MAC force forwarding entry configuration table. |
| 1.3.6.1.4.1.890.1.5.13.13.1.18.2.1.1 | ColumnmacFFEntryProfileName | read-only | current | Profile name |
| 1.3.6.1.4.1.890.1.5.13.13.1.18.2.1.2 | ColumnmacFFEntryIndex | read-only | current | The MAC force fowarding static entry index 1 ~ 24 |
| 1.3.6.1.4.1.890.1.5.13.13.1.18.2.1.3 | ColumnmacFFEntrySrcIP | read-write | current | Matched range for static subscriber's IP in ARP request |
| 1.3.6.1.4.1.890.1.5.13.13.1.18.2.1.4 | ColumnmacFFEntryMask | read-write | current | Matched range for static subscriber's IP in ARP request |
| 1.3.6.1.4.1.890.1.5.13.13.1.18.2.1.5 | ColumnmacFFEntryArasIP | read-write | current | IP of static MAC force fowarding Access Router/App Server |
| 1.3.6.1.4.1.890.1.5.13.13.1.18.2.1.6 | ColumnmacFFEntryVid | read-write | current | vlan ID of MAC force fowarding Access Router/App Server |
| 1.3.6.1.4.1.890.1.5.13.13.1.18.2.1.7 | ColumnmacFFEntryRowStatus | read-create | current | |
| 1.3.6.1.4.1.890.1.5.13.13.1.18.3 | TablemacFFApplyProflieTable | not-accessible | current | Configures references to specified macFF profile for the specified slot. |
| 1.3.6.1.4.1.890.1.5.13.13.1.18.3.1 | RowmacFFApplyProfileEntry | not-accessible | current | A table entry to assign slot with macFF profile. |
| 1.3.6.1.4.1.890.1.5.13.13.1.18.3.1.1 | ColumnmacFFApplyProfileName | read-write | current | Apply a profile name. Set '' for no apply proflie. |
| 1.3.6.1.4.1.890.1.5.13.13.1.18.4 | TablemacFFArpStatusUplinkTable | not-accessible | current | |
| 1.3.6.1.4.1.890.1.5.13.13.1.18.4.1 | RowmacFFArpStatusUplinkEntry | not-accessible | current | The entry of macFFArpStatusUplinkTable. |
| 1.3.6.1.4.1.890.1.5.13.13.1.18.4.1.1 | ColumnmacFFArpStatusUplinkIpAddr | read-only | current | macFF arp ip address from uplink |
| 1.3.6.1.4.1.890.1.5.13.13.1.18.4.1.2 | ColumnmacFFArpStatusUplinkMacAddr | read-only | current | macFF arp mac address from uplink |
| 1.3.6.1.4.1.890.1.5.13.13.1.18.4.1.3 | ColumnmacFFArpStatusUplinkMacVid | read-only | current | macFF arp vid from uplink |
| 1.3.6.1.4.1.890.1.5.13.13.1.18.5 | TablemacFFArpStatusSlotTable | not-accessible | current | |
| 1.3.6.1.4.1.890.1.5.13.13.1.18.5.1 | RowmacFFArpStatusSlotEntry | not-accessible | current | The entry of macFFArpStatusSlotTable. |
| 1.3.6.1.4.1.890.1.5.13.13.1.18.5.1.1 | ColumnmacFFArpStatusSlotIpAddr | read-only | current | macFF arp ip address from subscrib port |
| 1.3.6.1.4.1.890.1.5.13.13.1.18.5.1.2 | ColumnmacFFArpStatusSlotMacAddr | read-only | current | macFF arp mac address from subscrib port |
| 1.3.6.1.4.1.890.1.5.13.13.1.18.5.1.3 | ColumnmacFFArpStatusSlotMacVid | read-only | current | macFF arp vid from subscrib port |
| 1.3.6.1.4.1.890.1.5.13.13.1.18.5.1.4 | ColumnmacFFArpStatusSlotPort | read-only | current | macFF arp learnt subscrib port |
| 1.3.6.1.4.1.890.1.5.13.13.1.18.6 | TablemacFFArpCntUplinkTable | not-accessible | current | |
| 1.3.6.1.4.1.890.1.5.13.13.1.18.6.1 | RowmacFFArpCntUplinkEntry | not-accessible | current | The entry of macFFArpCntUplinkTable. |
| 1.3.6.1.4.1.890.1.5.13.13.1.18.6.1.1 | ColumnmacFFArpCntUplinkReqRx | read-only | current | macFF arp request rx counter from uplink |
| 1.3.6.1.4.1.890.1.5.13.13.1.18.6.1.2 | ColumnmacFFArpCntUplinkReqTx | read-only | current | macFF arp request tx counter from uplink |
| 1.3.6.1.4.1.890.1.5.13.13.1.18.6.1.3 | ColumnmacFFArpCntUplinkReqRxDrop | read-only | current | macFF arp request rx drop counter from uplink |
| 1.3.6.1.4.1.890.1.5.13.13.1.18.6.1.4 | ColumnmacFFArpCntUplinkRpyRx | read-only | current | macFF arp reply rx counter from uplink |
| 1.3.6.1.4.1.890.1.5.13.13.1.18.6.1.5 | ColumnmacFFArpCntUplinkRpyTx | read-only | current | macFF arp reply tx counter from uplink |
| 1.3.6.1.4.1.890.1.5.13.13.1.18.6.1.6 | ColumnmacFFArpCntUplinkRpyRxDrop | read-only | current | macFF arp reply rx drop counter from uplink |
| 1.3.6.1.4.1.890.1.5.13.13.1.18.7 | TablemacFFArpCntPortTable | not-accessible | current | |
| 1.3.6.1.4.1.890.1.5.13.13.1.18.7.1 | RowmacFFArpCntPortEntry | not-accessible | current | The entry of macFFArpCntPortTable. |
| 1.3.6.1.4.1.890.1.5.13.13.1.18.7.1.1 | ColumnmacFFArpCntPortReqRx | read-only | current | macFF arp request rx counter from subscrib port |
| 1.3.6.1.4.1.890.1.5.13.13.1.18.7.1.2 | ColumnmacFFArpCntPortReqTx | read-only | current | macFF arp request tx counter from subscrib port |
| 1.3.6.1.4.1.890.1.5.13.13.1.18.7.1.3 | ColumnmacFFArpCntPortReqRxDrop | read-only | current | macFF arp request rx drop counter from subscrib port |
| 1.3.6.1.4.1.890.1.5.13.13.1.18.7.1.4 | ColumnmacFFArpCntPortRpyRx | read-only | current | macFF arp reply rx counter from subscrib port |
| 1.3.6.1.4.1.890.1.5.13.13.1.18.7.1.5 | ColumnmacFFArpCntPortRpyTx | read-only | current | macFF arp reply tx counter from subscrib port |
| 1.3.6.1.4.1.890.1.5.13.13.1.18.7.1.6 | ColumnmacFFArpCntPortRpyRxDrop | read-only | current | macFF reply rx drop counter from subscrib port |
| 1.3.6.1.4.1.890.1.5.13.13.1.18.8 | NodemacFFOps | |||
| 1.3.6.1.4.1.890.1.5.13.13.1.18.8.1 | ScalarmacFFTarget | read-write | current | Configure the target interface (ifindex) to clear packet statistics. 10000: represent slot 1 system 20000: represent slot 2 system 40000: represent slot 4 syst… |
| 1.3.6.1.4.1.890.1.5.13.13.1.18.8.2 | ScalarmacFFOperation | read-write | current | Clear macff statistics on the target ifindex specified by 'macFFTarget'. |
| 1.3.6.1.4.1.890.1.5.13.13.1.20 | Nodedot1x | |||
| 1.3.6.1.4.1.890.1.5.13.13.1.20.2 | Scalardot1xAuthMethod | read-write | current | Configure the method for dot1x authentication. userprofile: use local configured user to authenticate user radius: use remote radius server to authenticate use… |
| 1.3.6.1.4.1.890.1.5.13.13.1.20.3 | Tabledot1xRadiusServerTable | not-accessible | current | A table that contains Radius Server information for 802.1x. |
| 1.3.6.1.4.1.890.1.5.13.13.1.20.3.1 | Rowdot1xRadiusServerEntry | not-accessible | current | The entry of Radius Server table. |
| 1.3.6.1.4.1.890.1.5.13.13.1.20.3.1.1 | Columndot1xRadiusServerIndex | read-only | current | The identity of the RADIUS server. |
| 1.3.6.1.4.1.890.1.5.13.13.1.20.3.1.2 | Columndot1xRadiusServerIp | read-write | current | The IP address of the Radius Server. Default IP 127.0.0.254 is invalid but allowed to set. |
| 1.3.6.1.4.1.890.1.5.13.13.1.20.3.1.3 | Columndot1xRadiusServerPort | read-write | current | The UDP port of the Radius Server. |
| 1.3.6.1.4.1.890.1.5.13.13.1.20.3.1.4 | Columndot1xRadiusServerSecret | read-write | current | The shared secret of the Radius Server. Server can't work with zero length. |
| 1.3.6.1.4.1.890.1.5.13.13.1.20.4 | Tabledot1xPortTable | not-accessible | current | This table includes 802.1x port configuration. |
| 1.3.6.1.4.1.890.1.5.13.13.1.20.4.1 | Rowdot1xPortEntry | not-accessible | current | An entry in dot1xPortTable. |
| 1.3.6.1.4.1.890.1.5.13.13.1.20.4.1.1 | Columndot1xPortActive | read-write | current | Enable/disable 802.1x for the port. |
| 1.3.6.1.4.1.890.1.5.13.13.1.20.4.1.2 | Columndot1xPortControl | read-write | current | Configure the authentication status of the port. auto: if the port is un-authenticated, system will trigger 802.1x procedure to authenticate user. If the port … |
| 1.3.6.1.4.1.890.1.5.13.13.1.20.4.1.3 | Columndot1xPortRadiusServerIndex | read-write | current | The index of the RADIUS server in dot1xRadiusServerTable |
| 1.3.6.1.4.1.890.1.5.13.13.1.20.4.1.4 | Columndot1xPortAuthOnce | read-write | current | If the port is authenticated, dot1x will not re-authenticate periodically. |
| 1.3.6.1.4.1.890.1.5.13.13.1.20.4.1.5 | Columndot1xPortPeriod | read-write | current | configure the interval if the port need re-authenticate periodically. <period>: 60 ~ 65535 in seconds, default is 3600 seconds. |
| 1.3.6.1.4.1.890.1.5.13.13.1.20.4.1.6 | Columndot1xPortCircuitIDInfo | read-write | current | Configures Dot1X circuit ID format Info is composed by the following components special characters except % => ~`!@#$^&*()-=_+{}<>,./ %%: equals character % %0… |
| 1.3.6.1.4.1.890.1.5.13.13.1.20.5 | Scalardot1xMaxNumOfUserProfiles | read-only | current | The maximum number of dot1x user profiles supported by the system. |
| 1.3.6.1.4.1.890.1.5.13.13.1.20.6 | Tabledot1xUserProfileTable | not-accessible | current | This table includes user profile setting for 802.1x configuration. |
| 1.3.6.1.4.1.890.1.5.13.13.1.20.6.1 | Rowdot1xUserProfileEntry | not-accessible | current | An entry in dot1xUserProfileTable. |
| 1.3.6.1.4.1.890.1.5.13.13.1.20.6.1.1 | Columndot1xUserProfileName | read-only | current | Name of Dot1X user profile |
| 1.3.6.1.4.1.890.1.5.13.13.1.20.6.1.2 | Columndot1xUserProfilePassword | read-create | current | Configure the password |
| 1.3.6.1.4.1.890.1.5.13.13.1.20.6.1.3 | Columndot1xUserProfileRowStatus | read-create | current | Row status of the table entry. |
| 1.3.6.1.4.1.890.1.5.13.13.1.20.7 | Tabledot1xStatsPortTable | not-accessible | current | This table includes port statistics of 802.1x . |
| 1.3.6.1.4.1.890.1.5.13.13.1.20.7.1 | Rowdot1xStatsPortEntry | not-accessible | current | An entry in dot1xStatsPortTable. |
| 1.3.6.1.4.1.890.1.5.13.13.1.20.7.1.1 | Columndot1xStatsPortReAuthCount | read-only | current | Display how many times each port re-authroize |
| 1.3.6.1.4.1.890.1.5.13.13.1.20.7.1.2 | Columndot1xStatsPortAuthorized | read-only | current | Display Authorized status |
| 1.3.6.1.4.1.890.1.5.13.13.1.21 | Nodeddos | |||
| 1.3.6.1.4.1.890.1.5.13.13.1.21.1 | ScalarddosMode | read-write | current | Configure the DDoS mode of GENNI ports. |
| 1.3.6.1.4.1.890.1.5.13.13.1.22 | TableportFilterTable | not-accessible | current | This table includes packet filter port configuration. |
| 1.3.6.1.4.1.890.1.5.13.13.1.22.1 | RowportFilterEntry | not-accessible | current | An entry in portFilterTable. |
| 1.3.6.1.4.1.890.1.5.13.13.1.22.1.1 | ColumnfilterType | read-write | current | accept-all Accept all packet type pppoe-only Only receive PPPoE packet custom Custom reject packet type pppoe reject PPPoE packet ip reject IP packet arp rejec… |
| 1.3.6.1.4.1.890.1.5.13.13.1.23 | Nodemacfilter | |||
| 1.3.6.1.4.1.890.1.5.13.13.1.23.1 | ScalarmaxNumOfMacFiltersPerSlot | read-only | current | The max number of mac(oui) filters supported per slot. |
| 1.3.6.1.4.1.890.1.5.13.13.1.23.2 | ScalarmaxNumOfMacFiltersPerPort | read-only | current | The max number of mac(oui) filters supported per port. |
| 1.3.6.1.4.1.890.1.5.13.13.1.23.3 | ScalarcurrNumOfMacFiltersPerSlot | read-only | current | The current number of mac(oui) filters per slot. |
| 1.3.6.1.4.1.890.1.5.13.13.1.23.4 | TablemacFilterPortTable | not-accessible | current | This table includes the status of mac filtering for each port. |
| 1.3.6.1.4.1.890.1.5.13.13.1.23.4.1 | RowmacFilterPortEntry | not-accessible | current | An entry in macFilterPortTable. |
| 1.3.6.1.4.1.890.1.5.13.13.1.23.4.1.1 | ColumnmacFilterPortEnable | read-write | current | Enable/disable MAC filtering for the port. |
| 1.3.6.1.4.1.890.1.5.13.13.1.23.4.1.2 | ColumnmacFilterPortFilterMode | read-write | current | The mac filter mode (accept or deny) for the port. |
| 1.3.6.1.4.1.890.1.5.13.13.1.23.5 | TablemacFilterTable | not-accessible | current | A table that contains the mac filter addresses. |
| 1.3.6.1.4.1.890.1.5.13.13.1.23.5.1 | RowmacFilterEntry | not-accessible | current | The entry of macFilterTable. |
| 1.3.6.1.4.1.890.1.5.13.13.1.23.5.1.1 | ColumnmacFilterAddr | read-only | current | The mac address which can pass through or be rejected from the port. |
| 1.3.6.1.4.1.890.1.5.13.13.1.23.5.1.2 | ColumnmacFilterRowStatus | read-create | current | The row status of the entry. |
| 1.3.6.1.4.1.890.1.5.13.13.1.23.6 | TableouiFilterTable | not-accessible | current | A table that contains the OUI filter addresses. |
| 1.3.6.1.4.1.890.1.5.13.13.1.23.6.1 | RowouiFilterEntry | not-accessible | current | The entry of ouiFilterTable. |
| 1.3.6.1.4.1.890.1.5.13.13.1.23.6.1.1 | ColumnouiFilterAddr | read-only | current | The first three bytes of the mac address which can pass through or be rejected from the port. |
| 1.3.6.1.4.1.890.1.5.13.13.1.23.6.1.2 | ColumnouiFilterRowStatus | read-create | current | The row status of the entry. |
| 1.3.6.1.4.1.890.1.5.13.13.1.24 | ScalaraclProfileMode | read-write | current | Set acl profile mode, profile mode only support to GLC card. Port: per-port mode, every port only can set 8 acl-profile with priority. Profile: per-profile mod… |
| 1.3.6.1.4.1.890.1.5.13.13.2 | Nodealarm | |||
| 1.3.6.1.4.1.890.1.5.13.13.2.1 | NodealarmOps | |||
| 1.3.6.1.4.1.890.1.5.13.13.2.1.1 | ScalarcurAlarmClearTargetTrapOid | read-write | current | Set target alarm Trap OID for clearing one current alarm. |
| 1.3.6.1.4.1.890.1.5.13.13.2.1.2 | ScalarcurAlarmClearTargetIndex1 | read-write | current | Set target alarm index1 for clearing one current alarm. |
| 1.3.6.1.4.1.890.1.5.13.13.2.1.3 | ScalarcurAlarmClearTargetIndex2 | read-write | current | Set target alarm index2 for clearing one current alarm. |
| 1.3.6.1.4.1.890.1.5.13.13.2.1.4 | ScalarcurAlarmClearTargetIndex3 | read-write | current | Set target alarm index3 for clearing one current alarm. |
| 1.3.6.1.4.1.890.1.5.13.13.2.1.5 | ScalaralarmOperation | read-write | current | Its value will be set to zero after operation finished. |
| 1.3.6.1.4.1.890.1.5.13.13.2.2 | TablecurrAlarmTable | not-accessible | current | Displays current alarm. |
| 1.3.6.1.4.1.890.1.5.13.13.2.2.1 | RowcurrAlarmEntry | not-accessible | current | |
| 1.3.6.1.4.1.890.1.5.13.13.2.2.1.1 | ColumncurrAlarmIndex | read-only | current | Index of the alarm. |
| 1.3.6.1.4.1.890.1.5.13.13.2.2.1.2 | ColumncurrAlarmCondId | read-only | current | |
| 1.3.6.1.4.1.890.1.5.13.13.2.2.1.3 | ColumncurrAlarmOccurTime | read-only | current | Alarm occurence time (in hundredths of a second) since the system was last re-initialized. |
| 1.3.6.1.4.1.890.1.5.13.13.2.2.1.4 | ColumncurrAlarmTrapOid | read-only | current | Trap OID of the alarm. |
| 1.3.6.1.4.1.890.1.5.13.13.2.2.1.5 | ColumncurrAlarmParam1 | read-only | current | The 1st parameter of the alarm. |
| 1.3.6.1.4.1.890.1.5.13.13.2.2.1.6 | ColumncurrAlarmParam2 | read-only | current | The 2nd parameter of the alarm. |
| 1.3.6.1.4.1.890.1.5.13.13.2.2.1.7 | ColumncurrAlarmParam3 | read-only | current | The 3rd parameter of the alarm. |
| 1.3.6.1.4.1.890.1.5.13.13.2.2.1.8 | ColumncurrAlarmParam4 | read-only | current | The 4th parameter of the alarm. |
| 1.3.6.1.4.1.890.1.5.13.13.2.2.1.9 | ColumncurrAlarmParam5 | read-only | current | The 5th parameter of the alarm. |
| 1.3.6.1.4.1.890.1.5.13.13.2.2.1.10 | ColumncurrAlarmParam6 | read-only | current | The 6th parameter of the alarm. |
| 1.3.6.1.4.1.890.1.5.13.13.2.2.1.11 | ColumncurrAlarmParam7 | read-only | current | The 7th parameter of the alarm. |
| 1.3.6.1.4.1.890.1.5.13.13.2.2.1.12 | ColumncurrAlarmParam8 | read-only | current | The 8th parameter of the alarm. |
| 1.3.6.1.4.1.890.1.5.13.13.2.2.1.13 | ColumncurrAlarmParam9 | read-only | current | The 9th parameter of the alarm. |
| 1.3.6.1.4.1.890.1.5.13.13.2.2.1.14 | ColumncurrAlarmTimeDescr | read-only | current | The string representation of occurence time (YYYY/MM/DD HH:MM:SS). |
| 1.3.6.1.4.1.890.1.5.13.13.2.2.1.15 | ColumncurrAlarmSeverity | read-only | current | The severity of the alarm. |
| 1.3.6.1.4.1.890.1.5.13.13.2.2.1.16 | ColumncurrAlarmDescr | read-only | current | The description of the alarm. |
| 1.3.6.1.4.1.890.1.5.13.13.2.3 | TablehistAlarmTable | not-accessible | current | Displays alarm history. |
| 1.3.6.1.4.1.890.1.5.13.13.2.3.1 | RowhistAlarmEntry | not-accessible | current | |
| 1.3.6.1.4.1.890.1.5.13.13.2.3.1.1 | ColumnhistAlarmIndex | read-only | current | Index of the alarm. |
| 1.3.6.1.4.1.890.1.5.13.13.2.3.1.2 | ColumnhistAlarmCondId | read-only | current | |
| 1.3.6.1.4.1.890.1.5.13.13.2.3.1.3 | ColumnhistAlarmOccurTime | read-only | current | Alarm occurence time (in hundredths of a second) since the system was last re-initialized. |
| 1.3.6.1.4.1.890.1.5.13.13.2.3.1.4 | ColumnhistAlarmTrapOid | read-only | current | Trap OID of the alarm. |
| 1.3.6.1.4.1.890.1.5.13.13.2.3.1.5 | ColumnhistAlarmParam1 | read-only | current | The 1st parameter of the alarm. |
| 1.3.6.1.4.1.890.1.5.13.13.2.3.1.6 | ColumnhistAlarmParam2 | read-only | current | The 2nd parameter of the alarm. |
| 1.3.6.1.4.1.890.1.5.13.13.2.3.1.7 | ColumnhistAlarmParam3 | read-only | current | The 3rd parameter of the alarm. |
| 1.3.6.1.4.1.890.1.5.13.13.2.3.1.8 | ColumnhistAlarmParam4 | read-only | current | The 4th parameter of the alarm. |
| 1.3.6.1.4.1.890.1.5.13.13.2.3.1.9 | ColumnhistAlarmParam5 | read-only | current | The 5th parameter of the alarm. |
| 1.3.6.1.4.1.890.1.5.13.13.2.3.1.10 | ColumnhistAlarmParam6 | read-only | current | The 6th parameter of the alarm. |
| 1.3.6.1.4.1.890.1.5.13.13.2.3.1.11 | ColumnhistAlarmParam7 | read-only | current | The 7th parameter of the alarm. |
| 1.3.6.1.4.1.890.1.5.13.13.2.3.1.12 | ColumnhistAlarmParam8 | read-only | current | The 8th parameter of the alarm. |
| 1.3.6.1.4.1.890.1.5.13.13.2.3.1.13 | ColumnhistAlarmParam9 | read-only | current | The 9th parameter of the alarm. |
| 1.3.6.1.4.1.890.1.5.13.13.2.3.1.14 | ColumnhistAlarmTimeDescr | read-only | current | The string representation of occurence time (YYYY/MM/DD HH:MM:SS). |
| 1.3.6.1.4.1.890.1.5.13.13.2.3.1.15 | ColumnhistAlarmSeverity | read-only | current | The severity of the alarm. |
| 1.3.6.1.4.1.890.1.5.13.13.2.3.1.16 | ColumnhistAlarmDescr | read-only | current | The description of the alarm. |
| 1.3.6.1.4.1.890.1.5.13.13.2.4 | TablealarmConfTable | not-accessible | current | Configures specified alarm definition. |
| 1.3.6.1.4.1.890.1.5.13.13.2.4.1 | RowalarmConfEntry | not-accessible | current | |
| 1.3.6.1.4.1.890.1.5.13.13.2.4.1.1 | ColumnalarmConfTrapIndex | read-only | current | alarm index |
| 1.3.6.1.4.1.890.1.5.13.13.2.4.1.2 | ColumnalarmConfTrapOid | read-only | current | alarm condition code |
| 1.3.6.1.4.1.890.1.5.13.13.2.4.1.3 | ColumnalarmConfSeverity | read-write | current | alarm severity. |
| 1.3.6.1.4.1.890.1.5.13.13.2.4.1.4 | ColumnalarmConfLogFacility | read-write | current | alarm syslog-facility |
| 1.3.6.1.4.1.890.1.5.13.13.2.4.1.5 | ColumnalarmConfTarget | read-write | current | alarm issue target |
| 1.3.6.1.4.1.890.1.5.13.13.2.5 | ScalaralarmSeveritySystem | read-write | current | Configures the minimum severity level to send out alarm notification (SNMP trap and SYSLOG) for overall system. |
| 1.3.6.1.4.1.890.1.5.13.13.2.6 | TablealarmSeverityPortTable | not-accessible | current | Configures the minimum severity level to send out alarm notification (SNMP trap and SYSLOG) for each port. |
| 1.3.6.1.4.1.890.1.5.13.13.2.6.1 | RowalarmSeverityPortEntry | not-accessible | current | |
| 1.3.6.1.4.1.890.1.5.13.13.2.6.1.1 | ColumnalarmSeverityPortThresh | read-write | current | This is to configure the alarm supression on per port basis based on alarm severity. |
| 1.3.6.1.4.1.890.1.5.13.13.2.7 | NodealarmControl | |||
| 1.3.6.1.4.1.890.1.5.13.13.2.7.1 | ScalarsysAlarmSuppressEnable | read-write | current | Enable means no alarm trap will be sent. Only trap of alarm with event severity can be reported. Disable means no suppress. |
| 1.3.6.1.4.1.890.1.5.13.13.2.8 | TableexternalAlarmTable | not-accessible | current | Configures alarm input description. |
| 1.3.6.1.4.1.890.1.5.13.13.2.8.1 | RowexternalAlarmEntry | not-accessible | current | |
| 1.3.6.1.4.1.890.1.5.13.13.2.8.1.1 | ColumnexternalAlarmIndex | read-only | current | External alarm index |
| 1.3.6.1.4.1.890.1.5.13.13.2.8.1.2 | ColumnexternalAlarmName | read-write | current | External alarm name |
| 1.3.6.1.4.1.890.1.5.13.13.3 | Nodedhcp | |||
| 1.3.6.1.4.1.890.1.5.13.13.3.1 | NodedhcpL2Agent | |||
| 1.3.6.1.4.1.890.1.5.13.13.3.1.1 | TabledhcpL2AgentTable | not-accessible | current | A table that contains DHCP L2 agent configuration. |
| 1.3.6.1.4.1.890.1.5.13.13.3.1.1.1 | RowdhcpL2AgentEntry | not-accessible | current | An entry of dhcpL2AgentTable. |
| 1.3.6.1.4.1.890.1.5.13.13.3.1.1.1.1 | ColumndhcpL2AgentVlanId | read-only | current | Specify the VLAN with DHCP transparent or DHCP L2 agent function. |
| 1.3.6.1.4.1.890.1.5.13.13.3.1.1.1.2 | ColumndhcpL2AgentMode | read-create | current | Specify the DHCP L2 agent mode. dhcpL2Agent(1) - DHCP L2 Agent function is enabled. |
| 1.3.6.1.4.1.890.1.5.13.13.3.1.1.1.3 | ColumndhcpL2AgentLdraEnable | read-create | current | Enable/disable Light Weight DHCPv6 Relay Agent in dhcpL2Agent mode |
| 1.3.6.1.4.1.890.1.5.13.13.3.1.1.1.5 | ColumndhcpL2AgentOpt18InterfaceIDInfo | read-create | current | User specific DHCP option18 dhcpL2AgentOpt82CircuitIDEnable ID info. Info is composed by the following components special characters except % => ~`!@#$^&*()-=_… |
| 1.3.6.1.4.1.890.1.5.13.13.3.1.1.1.7 | ColumndhcpL2AgentOpt37RemoteIDInfo | read-create | current | User specific DHCP option37 remote ID info. Info is composed by the following components special characters except % => ~`!@#$^&*()-=_+{}<>,./ %%: equals chara… |
| 1.3.6.1.4.1.890.1.5.13.13.3.1.1.1.9 | ColumndhcpL2AgentOpt82CircuitIDInfo | read-create | current | User specific DHCP option82 circuit ID info. Info is composed by the following components special characters except % => ~`!@#$^&*()-=_+{}<>,./ %%: equals char… |
| 1.3.6.1.4.1.890.1.5.13.13.3.1.1.1.11 | ColumndhcpL2AgentOpt82RemoteIDInfo | read-create | current | User specific DHCP option82 remote ID info. Info is composed by the following components special characters except % => ~`!@#$^&*()-=_+{}<>,./ %%: equals chara… |
| 1.3.6.1.4.1.890.1.5.13.13.3.1.1.1.12 | ColumndhcpL2AgentOpt82PolicyVlan | read-create | current | Select option82 policy in dhcpL2Agent mode. |
| 1.3.6.1.4.1.890.1.5.13.13.3.1.1.1.13 | ColumndhcpL2AgentRelayEnable | read-create | current | Enable/disable DHCP relay in dhcpL2Agent mode. |
| 1.3.6.1.4.1.890.1.5.13.13.3.1.1.1.14 | ColumndhcpL2AgentRelayPrimarySvrIp | read-create | current | Configure DHCP relay primary server IP in dhcpL2Agent mode. |
| 1.3.6.1.4.1.890.1.5.13.13.3.1.1.1.15 | ColumndhcpL2AgentRelaySecondarySvrIp | read-create | current | Configure DHCP relay secondary server IP in dhcpL2Agent mode. |
| 1.3.6.1.4.1.890.1.5.13.13.3.1.1.1.16 | ColumndhcpL2AgentRelayActSvrIndex | read-create | current | Select DHCP relay active server in dhcpL2Agent mode. |
| 1.3.6.1.4.1.890.1.5.13.13.3.1.1.1.17 | ColumndhcpL2AgentRelayMode | read-create | current | Select DHCP relay mode in dhcpL2Agent mode. |
| 1.3.6.1.4.1.890.1.5.13.13.3.1.1.1.18 | ColumndhcpL2AgentRowStatus | read-create | current | Row status of the table entry. |
| 1.3.6.1.4.1.890.1.5.13.13.3.1.1.1.19 | ColumndhcpL2AgentOpt82Linechar | read-create | current | Select option82 linechar in dhcpL2Agent mode. |
| 1.3.6.1.4.1.890.1.5.13.13.3.1.2 | ScalardhcpL2AgentOpt82Chk | read-write | current | Enable/disable system to check option82 in DHCP packets from DHCP server. |
| 1.3.6.1.4.1.890.1.5.13.13.3.1.3 | ScalardhcpL2AgentOpt82PolicyMode | read-write | current | Select DHCP option82 policy mode. |
| 1.3.6.1.4.1.890.1.5.13.13.3.2 | NodedhcpSnoop | |||
| 1.3.6.1.4.1.890.1.5.13.13.3.2.1 | TabledhcpSnoopPortTable | not-accessible | current | A table that contains DHCP Snoop configuration for specified linecard ports. |
| 1.3.6.1.4.1.890.1.5.13.13.3.2.1.1 | RowdhcpSnoopPortEntry | not-accessible | current | Configures DHCP snooping for specified linecard ports. |
| 1.3.6.1.4.1.890.1.5.13.13.3.2.1.1.1 | ColumndhcpSnoopPortIpMacBindingEnable | read-write | current | Enables IP-MAC binding on specified linecard ports. |
| 1.3.6.1.4.1.890.1.5.13.13.3.2.1.1.2 | ColumndhcpSnoopPortMaxLeaseCount | read-write | current | Configures DHCP Snooping database max lease count for specified linecard ports. |
| 1.3.6.1.4.1.890.1.5.13.13.3.2.1.1.7 | ColumndhcpSnoopPortDbFlush | read-write | current | Set 1 to flush DHCP database for specified linecard ports. |
| 1.3.6.1.4.1.890.1.5.13.13.3.2.1.1.8 | ColumndhcpSnoopPortStatsClear | read-write | current | Set 1 to clear all the counter in dhcpSnoopStatsTable. |
| 1.3.6.1.4.1.890.1.5.13.13.3.2.1.1.9 | ColumndhcpSnoopPortPriorityVlan | read-create | current | Configure priority VLAN of snoop database. Set 0 to clear priority VLAN configuration. |
| 1.3.6.1.4.1.890.1.5.13.13.3.2.2 | ScalardhcpSnoopOverflowMode | read-write | current | Configures DHCP Snooping database overflow handling mode. |
| 1.3.6.1.4.1.890.1.5.13.13.3.2.3 | TabledhcpSnoopDbTable | not-accessible | current | A table that contains DHCP Snoop database on specified linecard ports. |
| 1.3.6.1.4.1.890.1.5.13.13.3.2.3.1 | RowdhcpSnoopDbEntry | not-accessible | current | Show DHCP database on specified linecard ports. |
| 1.3.6.1.4.1.890.1.5.13.13.3.2.3.1.1 | ColumndhcpSnoopDbIpType | read-only | current | IP address type, IPv6 or IPv4. |
| 1.3.6.1.4.1.890.1.5.13.13.3.2.3.1.2 | ColumndhcpSnoopDbIp | read-only | current | Show the IP address in the DHCP database on specified linecard ports. |
| 1.3.6.1.4.1.890.1.5.13.13.3.2.3.1.3 | ColumndhcpSnoopDbVid | read-only | current | Show the vid in the DHCP database on specified linecard ports. |
| 1.3.6.1.4.1.890.1.5.13.13.3.2.3.1.4 | ColumndhcpSnoopDbMac | read-only | current | Show the MAC address in the DHCP database on specified linecard ports. |
| 1.3.6.1.4.1.890.1.5.13.13.3.2.4 | TabledhcpSnoopStatsTable | not-accessible | current | A table that contains DHCP stats on specified linecard ports. |
| 1.3.6.1.4.1.890.1.5.13.13.3.2.4.1 | RowdhcpSnoopStatsEntry | not-accessible | current | show DHCP stats on specified linecard ports. |
| 1.3.6.1.4.1.890.1.5.13.13.3.2.4.1.1 | ColumndhcpSnoopStatsOverFlow | read-only | current | Show the counter when occurs overflow in DHCPv4 and DHCPv6. |
| 1.3.6.1.4.1.890.1.5.13.13.3.2.4.1.2 | ColumndhcpSnoopStatsV4Discover | read-only | current | Show the number of DHCPv4 Discover packets. |
| 1.3.6.1.4.1.890.1.5.13.13.3.2.4.1.3 | ColumndhcpSnoopStatsV4Offer | read-only | current | Show the number of DHCPv4 Offer packets. |
| 1.3.6.1.4.1.890.1.5.13.13.3.2.4.1.4 | ColumndhcpSnoopStatsV4Request | read-only | current | Show the number of DHCPv4 Request packets. |
| 1.3.6.1.4.1.890.1.5.13.13.3.2.4.1.5 | ColumndhcpSnoopStatsV4Ack | read-only | current | Show the number of DHCPv4 Ack packets. |
| 1.3.6.1.4.1.890.1.5.13.13.3.2.4.1.6 | ColumndhcpSnoopStatsV4Release | read-only | current | Show the number of DHCPv4 Release packets. |
| 1.3.6.1.4.1.890.1.5.13.13.3.2.4.1.7 | ColumndhcpSnoopStatsV6Solicit | read-only | current | Show the number of DHCPv6 Solicit packets. |
| 1.3.6.1.4.1.890.1.5.13.13.3.2.4.1.8 | ColumndhcpSnoopStatsV6Advertise | read-only | current | Show the number of DHCPv6 Advertise packets. |
| 1.3.6.1.4.1.890.1.5.13.13.3.2.4.1.9 | ColumndhcpSnoopStatsV6Request | read-only | current | Show the number of DHCPv6 Request packets. |
| 1.3.6.1.4.1.890.1.5.13.13.3.2.4.1.10 | ColumndhcpSnoopStatsV6Reply | read-only | current | Show the number of DHCPv6 Reply packets. |
| 1.3.6.1.4.1.890.1.5.13.13.3.2.4.1.11 | ColumndhcpSnoopStatsV6Renew | read-only | current | Show the number of DHCPv6 Renew packets. |
| 1.3.6.1.4.1.890.1.5.13.13.3.2.4.1.12 | ColumndhcpSnoopStatsV6Rebind | read-only | current | Show the number of DHCPv6 Rebind packets. |
| 1.3.6.1.4.1.890.1.5.13.13.3.2.4.1.13 | ColumndhcpSnoopStatsV6Release | read-only | current | Show the number of DHCPv6 Release packets. |
| 1.3.6.1.4.1.890.1.5.13.13.3.2.4.1.14 | ColumndhcpSnoopStatsV6RelayForward | read-only | current | Show the number of DHCPv6 Relay Forward packets. |
| 1.3.6.1.4.1.890.1.5.13.13.3.2.4.1.15 | ColumndhcpSnoopStatsV6RelayReply | read-only | current | Show the number of DHCPv6 Relay Reply packets. |
| 1.3.6.1.4.1.890.1.5.13.13.3.2.5 | TabledhcpStaticIpPortTable | not-accessible | current | A table that contains DHCP Static IP filter configuration for specified linecard ports. |
| 1.3.6.1.4.1.890.1.5.13.13.3.2.5.1 | RowdhcpStaticIpPortEntry | not-accessible | current | Configures DHCP static IP Filter IP for specified linecard ports. |
| 1.3.6.1.4.1.890.1.5.13.13.3.2.5.1.1 | ColumnipIndex | read-only | current | Specified static ip Index. |
| 1.3.6.1.4.1.890.1.5.13.13.3.2.5.1.2 | ColumndhcpStaticIpPortIp | read-write | current | Configure IP address of static IP filter for specified linecard ports. |
| 1.3.6.1.4.1.890.1.5.13.13.3.2.5.1.3 | ColumndhcpStaticIpFilterEnable | read-write | current | Enables static IP-MAC Binding on specified linecard ports. |
| 1.3.6.1.4.1.890.1.5.13.13.3.3 | NodedhcpL2AgentPort | |||
| 1.3.6.1.4.1.890.1.5.13.13.3.3.1 | TabledhcpL2AgentPortTable | not-accessible | current | A table that contains DHCP configuration for specified linecard ports. |
| 1.3.6.1.4.1.890.1.5.13.13.3.3.1.1 | RowdhcpL2AgentPortEntry | not-accessible | current | Configures DHCP for specified linecard ports. |
| 1.3.6.1.4.1.890.1.5.13.13.3.3.1.1.1 | ColumndhcpL2AgentOpt82PolicyPort | read-write | current | Select option82 policy on specified linecard ports. |
| 1.3.6.1.4.1.890.1.5.13.13.3.3.1.1.2 | ColumndhcpL2AgentOptLdraPolicyPort | read-write | current | Select option LDRA policy on specified linecard ports. |
| 1.3.6.1.4.1.890.1.5.13.13.3.4 | NodedhcpServer | |||
| 1.3.6.1.4.1.890.1.5.13.13.3.4.1 | TabledhcpServerTable | not-accessible | current | A table that contains DHCP server configuration on specific VLAN |
| 1.3.6.1.4.1.890.1.5.13.13.3.4.1.1 | RowdhcpServerEntry | not-accessible | current | An entry of dhcpServerTable. |
| 1.3.6.1.4.1.890.1.5.13.13.3.4.1.1.1 | ColumndhcpServerVlanId | read-only | current | Specify the VLAN with DHCP transparent or DHCP server function. |
| 1.3.6.1.4.1.890.1.5.13.13.3.4.1.1.2 | ColumndhcpServerStartAddress | read-create | current | The IPv4 address of the first address in the range |
| 1.3.6.1.4.1.890.1.5.13.13.3.4.1.1.3 | ColumndhcpServerEndAddress | read-create | current | The IPv4 address of the last address in the range |
| 1.3.6.1.4.1.890.1.5.13.13.3.4.1.1.4 | ColumndhpcServerSubnetMaskBit | read-create | current | This option mask option specifies the client's subnet maskbit. 0 means not use this option |
| 1.3.6.1.4.1.890.1.5.13.13.3.4.1.1.5 | ColumndhpcServerGateway | read-create | current | This option specifies the IPv4 address for the default gateway on the client's subnet. 0.0.0.0 means not use this option |
| 1.3.6.1.4.1.890.1.5.13.13.3.4.1.1.6 | ColumndhpcServerPrimaryDnsServer | read-create | current | This option specifies the IPv4 address for the primary dns server available to the client. 0.0.0.0 means not use both this option and dhpcServerSecondaryDnsSer… |
| 1.3.6.1.4.1.890.1.5.13.13.3.4.1.1.7 | ColumndhpcServerSecondaryDnsServer | read-create | current | This option specifies the IPv4 address for the secondary dns server available to the client. 0.0.0.0 means not use this option |
| 1.3.6.1.4.1.890.1.5.13.13.3.4.1.1.10 | ColumndhcpServerRowStatus | read-create | current | Row status of the table entry. |
| 1.3.6.1.4.1.890.1.5.13.13.3.4.2 | TabledhcpServerLeaseTable | not-accessible | current | A table that contains DHCP server configuration |
| 1.3.6.1.4.1.890.1.5.13.13.3.4.2.1 | RowdhcpServerLeaseEntry | not-accessible | current | An entry of dhcpLeaseTable. |
| 1.3.6.1.4.1.890.1.5.13.13.3.4.2.1.1 | ColumndhcpServerLeaseIpAddress | read-only | current | |
| 1.3.6.1.4.1.890.1.5.13.13.3.4.2.1.2 | ColumndhcpServerLeaseMacAddress | read-only | current | |
| 1.3.6.1.4.1.890.1.5.13.13.3.4.2.1.3 | ColumndhcpServerLeaseTime | read-only | current | |
| 1.3.6.1.4.1.890.1.5.13.13.4 | Nodege | |||
| 1.3.6.1.4.1.890.1.5.13.13.4.1 | TablegeConfTable | not-accessible | current | Configures for the specified GE-NNI ports. |
| 1.3.6.1.4.1.890.1.5.13.13.4.1.1 | RowgeConfEntry | not-accessible | current | |
| 1.3.6.1.4.1.890.1.5.13.13.4.1.1.5 | ColumngeConfSpeed | read-write | current | Configures speed of gigabit uplink interface speed-auto(1): the system configures uplink speed according to plugged-in transceiver module, if a 1Gbps only tran… |
| 1.3.6.1.4.1.890.1.5.13.13.4.1.1.6 | ColumngeConfAutoNego | read-write | current | Configures auto-negotiation mode of gigabit uplink interface. 10G speed do not support auto-negotiation mode. enable(1): enable auto-negotiation mode disable(2… |
| 1.3.6.1.4.1.890.1.5.13.13.4.1.1.7 | ColumngeConfFlowControl | read-write | current | Configures flow control mode of GE interface. enable(1): enable flow control disable(2): disable flow control Default: enable. |
| 1.3.6.1.4.1.890.1.5.13.13.4.1.1.8 | ColumngeConfSubtendMode | read-write | current | Configures flow subtend mode of GE interface. subtend(1): enable subtend mode uplink(2): enable uplink mode auto(2): enable auto mode Default: uplink(2) The tr… |
| 1.3.6.1.4.1.890.1.5.13.13.4.1.1.9 | ColumngeConfVlanTrunk | read-write | current | Configures vlan trunk of GE interface. enable(1): enable vlan trunk disable(2): disable vlan trunk Default: disable(2) The traffic from vlan trunk port will pa… |
| 1.3.6.1.4.1.890.1.5.13.13.4.2 | NodegeOps | |||
| 1.3.6.1.4.1.890.1.5.13.13.4.2.1 | ScalargeTarget | read-write | current | Configure the target GE interface (ifindex) to clear packet statistics. |
| 1.3.6.1.4.1.890.1.5.13.13.4.2.2 | ScalargeOperation | read-write | current | Clear packet statistics on the target GE ifindex specified by 'geTarget'. |
| 1.3.6.1.4.1.890.1.5.13.13.4.3 | TablegeDdmiCfgPortTable | not-accessible | current | Displays current DDMI status on GE-NNI port. |
| 1.3.6.1.4.1.890.1.5.13.13.4.3.1 | RowgeDdmiCfgPortEntry | not-accessible | current | |
| 1.3.6.1.4.1.890.1.5.13.13.4.3.1.1 | ColumngeDdmiTempHighAlarmThresh | read-write | current | User defined high alarm threshold of temperature of sfp port |
| 1.3.6.1.4.1.890.1.5.13.13.4.3.1.2 | ColumngeDdmiTempLowAlarmThresh | read-write | current | User defined low alarm threshold of temperature of sfp port |
| 1.3.6.1.4.1.890.1.5.13.13.4.3.1.3 | ColumngeDdmiVoltageHighAlarmThresh | read-write | current | User defined high alarm threshold of voltage of sfp port |
| 1.3.6.1.4.1.890.1.5.13.13.4.3.1.4 | ColumngeDdmiVoltageLowAlarmThresh | read-write | current | User defined low alarm threshold of voltage of sfp port |
| 1.3.6.1.4.1.890.1.5.13.13.4.3.1.5 | ColumngeDdmiTxBiasHighAlarmThresh | read-write | current | User defined high alarm threshold of tx bias of sfp port |
| 1.3.6.1.4.1.890.1.5.13.13.4.3.1.6 | ColumngeDdmiTxBiasLowAlarmThresh | read-write | current | User defined low alarm threshold of tx bias of sfp port |
| 1.3.6.1.4.1.890.1.5.13.13.4.3.1.7 | ColumngeDdmiTxPowerHighAlarmThresh | read-write | current | User defined high alarm threshold of tx power of sfp port |
| 1.3.6.1.4.1.890.1.5.13.13.4.3.1.8 | ColumngeDdmiTxPowerLowAlarmThresh | read-write | current | User defined low alarm threshold of tx power of sfp port |
| 1.3.6.1.4.1.890.1.5.13.13.4.3.1.9 | ColumngeDdmiTxPowerHighAlarmThreshdBm | read-only | current | User defined high alarm threshold of tx power of sfp port(Units:dBm) |
| 1.3.6.1.4.1.890.1.5.13.13.4.3.1.10 | ColumngeDdmiTxPowerLowAlarmThreshdBm | read-only | current | User defined low alarm threshold of tx power of sfp port (Units:dBm) |
| 1.3.6.1.4.1.890.1.5.13.13.4.3.1.11 | ColumngeDdmiRxPowerHighAlarmThresh | read-write | current | User defined high alarm threshold of rx power of sfp port |
| 1.3.6.1.4.1.890.1.5.13.13.4.3.1.12 | ColumngeDdmiRxPowerLowAlarmThresh | read-write | current | User defined low alarm threshold of rx power of sfp port |
| 1.3.6.1.4.1.890.1.5.13.13.4.3.1.13 | ColumngeDdmiRxPowerHighAlarmThreshdBm | read-only | current | User defined high alarm threshold of rx power of sfp port (Units:dBm) |
| 1.3.6.1.4.1.890.1.5.13.13.4.3.1.14 | ColumngeDdmiRxPowerLowAlarmThreshdBm | read-only | current | User defined low alarm threshold of rx power of sfp port (Units:dBm) |
| 1.3.6.1.4.1.890.1.5.13.13.4.4 | TablegeDdmiTable | not-accessible | current | Displays current DDMI status on GE-NNI port. |
| 1.3.6.1.4.1.890.1.5.13.13.4.4.1 | RowgeDdmiEntry | not-accessible | current | |
| 1.3.6.1.4.1.890.1.5.13.13.4.4.1.1 | ColumngeDdmiVendorName | read-only | current | SFP vendor name. |
| 1.3.6.1.4.1.890.1.5.13.13.4.4.1.2 | ColumngeDdmiVendorPn | read-only | current | SFP vendor PN(Part number). |
| 1.3.6.1.4.1.890.1.5.13.13.4.4.1.3 | ColumngeDdmiTemp | read-only | current | Internally measured transceive temperature in 10^(-4) Celsius. |
| 1.3.6.1.4.1.890.1.5.13.13.4.4.1.4 | ColumngeDdmiTempHighAlarm | read-only | current | Internally measured the high alarm threshold of transceiver temperature in 10^(-4) Celsius. |
| 1.3.6.1.4.1.890.1.5.13.13.4.4.1.5 | ColumngeDdmiTempLowAlarm | read-only | current | Internally measured the low alarm threshold of transceiver temperature in 10^(-4) Celsius. |
| 1.3.6.1.4.1.890.1.5.13.13.4.4.1.6 | ColumngeDdmiVolt | read-only | current | Internally measured transceiver supply voltage in 10^(-4) Volts. |
| 1.3.6.1.4.1.890.1.5.13.13.4.4.1.7 | ColumngeDdmiVoltHighAlarm | read-only | current | Internally measured the high alarm threshold of transceiver supply voltage in 10^(-4) Volts. |
| 1.3.6.1.4.1.890.1.5.13.13.4.4.1.8 | ColumngeDdmiVoltLowAlarm | read-only | current | Internally measured the low alarm threshold of transceiver supply voltage in 10^(-4) Volts. |
| 1.3.6.1.4.1.890.1.5.13.13.4.4.1.9 | ColumngeDdmiTxCurr | read-only | current | Measured TX bias current in 10^(-4) mA. |
| 1.3.6.1.4.1.890.1.5.13.13.4.4.1.10 | ColumngeDdmiTxCurrHighAlarm | read-only | current | Measured the high alarm threshold of TX bias current in 10^(-4) mA. |
| 1.3.6.1.4.1.890.1.5.13.13.4.4.1.11 | ColumngeDdmiTxCurrLowAlarm | read-only | current | Measured the low alarm threshold of TX bias current in 10^(-4) mA. |
| 1.3.6.1.4.1.890.1.5.13.13.4.4.1.12 | ColumngeDdmiTxPower | read-only | current | Measured TX output power in 10^(-4) uW. |
| 1.3.6.1.4.1.890.1.5.13.13.4.4.1.13 | ColumngeDdmiTxPowerHighAlarm | read-only | current | Measured the high alarm threshold of TX output power in 10^(-4) uW. |
| 1.3.6.1.4.1.890.1.5.13.13.4.4.1.14 | ColumngeDdmiTxPowerLowAlarm | read-only | current | Measured the low alarm threshold of TX output power in 10^(-4) uW. |
| 1.3.6.1.4.1.890.1.5.13.13.4.4.1.15 | ColumngeDdmiRxPower | read-only | current | Measured RX received optical power in 10^(-4) uW. |
| 1.3.6.1.4.1.890.1.5.13.13.4.4.1.16 | ColumngeDdmiRxPowerHighAlarm | read-only | current | Measured the high alarm threshold of RX received optical power in 10^(-4) uW. |
| 1.3.6.1.4.1.890.1.5.13.13.4.4.1.17 | ColumngeDdmiRxPowerLowAlarm | read-only | current | Measured the low alarm threshold of RX received optical power in 10^(-4) uW. |
| 1.3.6.1.4.1.890.1.5.13.13.4.4.1.18 | ColumngeDdmiTxPowerdBm | read-only | current | Measured TX output power in 10^(-4) dBm. |
| 1.3.6.1.4.1.890.1.5.13.13.4.4.1.19 | ColumngeDdmiTxPowerHighAlarmdBm | read-only | current | Measured the high alarm threshold of TX output power in 10^(-4) dBm. |
| 1.3.6.1.4.1.890.1.5.13.13.4.4.1.20 | ColumngeDdmiTxPowerLowAlarmdBm | read-only | current | Measured the low alarm threshold of TX output power in 10^(-4) dBm. |
| 1.3.6.1.4.1.890.1.5.13.13.4.4.1.21 | ColumngeDdmiRxPowerdBm | read-only | current | Measured RX received optical power in 10^(-4) dBm. |
| 1.3.6.1.4.1.890.1.5.13.13.4.4.1.22 | ColumngeDdmiRxPowerHighAlarmdBm | read-only | current | Measured the high alarm threshold of RX received optical power in 10^(-4) dBm. |
| 1.3.6.1.4.1.890.1.5.13.13.4.4.1.23 | ColumngeDdmiRxPowerLowAlarmdBm | read-only | current | Measured the low alarm threshold of RX received optical power in 10^(-4) dBm. |
| 1.3.6.1.4.1.890.1.5.13.13.4.4.1.24 | ColumngeDdmiVendorRevision | read-only | current | SFP vendor revision. |
| 1.3.6.1.4.1.890.1.5.13.13.4.4.1.25 | ColumngeDdmiVendorSn | read-only | current | SFP vendor SN(Serial number). |
| 1.3.6.1.4.1.890.1.5.13.13.4.5 | TablegeStatusTable | not-accessible | current | The table displays GE-NNI ports Status |
| 1.3.6.1.4.1.890.1.5.13.13.4.5.1 | RowgeStatusEntry | not-accessible | current | |
| 1.3.6.1.4.1.890.1.5.13.13.4.5.1.1 | ColumngeStatusMode | read-only | current | GE-NNI ports Mode |
| 1.3.6.1.4.1.890.1.5.13.13.5 | Nodehwmonitor | |||
| 1.3.6.1.4.1.890.1.5.13.13.5.1 | TablefanConfTable | not-accessible | current | Configure the limit value of fan module, currently only control card has fan, an alarm will be raised if the sensing value higher or lower than these value. |
| 1.3.6.1.4.1.890.1.5.13.13.5.1.1 | RowfanConfEntry | not-accessible | current | |
| 1.3.6.1.4.1.890.1.5.13.13.5.1.1.1 | ColumnfanConfIndex | read-only | current | FAN module index |
| 1.3.6.1.4.1.890.1.5.13.13.5.1.1.2 | ColumnfanConfHighThreshold | read-write | current | FAN speed high threshold |
| 1.3.6.1.4.1.890.1.5.13.13.5.1.1.3 | ColumnfanConfLowThreshold | read-write | current | FAN speed low threshold |
| 1.3.6.1.4.1.890.1.5.13.13.5.2 | TabletemperatureConfTable | not-accessible | current | Configure the limit value of temperature module, an alarm will be raised if the sensing value higher or lower than these value. |
| 1.3.6.1.4.1.890.1.5.13.13.5.2.1 | RowtemperatureConfEntry | not-accessible | current | This is a temperature detection configuration entry to define temperature alarm high and low threshold. |
| 1.3.6.1.4.1.890.1.5.13.13.5.2.1.1 | ColumntemperatureConfIndex | read-only | current | The temperatureConfIndex indicates temperature sensor point where: 1 - is a sensing point near DC/DC power brick 2 - is a sensing point near Analog Front End (… |
| 1.3.6.1.4.1.890.1.5.13.13.5.2.1.2 | ColumntemperatureConfHighThreshold | read-write | current | Temperature high threshold. if card type is olc3416-22, then the range is -50 ~ 106 and another card type is -50 ~ 100 |
| 1.3.6.1.4.1.890.1.5.13.13.5.2.1.3 | ColumntemperatureConfLowThreshold | read-write | current | Temperature low threshold. if card type is olc3416-22, then the range is -50 ~ 106 and another card type is -50 ~ 100 |
| 1.3.6.1.4.1.890.1.5.13.13.5.2.1.4 | ColumntemperatureConfCardType | read-only | current | Card type of temperature threshold |
| 1.3.6.1.4.1.890.1.5.13.13.5.3 | TablevoltageConfTable | not-accessible | current | Configure the limit value of voltage module, an alarm will be raised if the sensing value higher or lower than these value. |
| 1.3.6.1.4.1.890.1.5.13.13.5.3.1 | RowvoltageConfEntry | not-accessible | current | This is a voltage detection configuration entry to define voltage alarm high and low threshold. |
| 1.3.6.1.4.1.890.1.5.13.13.5.3.1.1 | ColumnvoltageConfIndex | read-only | current | Voltage sensor is indexed from 1 to 5. voltage sensor 1 - monitor +1.05Vdc source voltage sensor 2 - monitor +1.2Vdc source voltage sensor 3 - monitor +1.8Vdc … |
| 1.3.6.1.4.1.890.1.5.13.13.5.3.1.2 | ColumnvoltageConfHighThreshold | read-write | current | Voltage high threshold. |
| 1.3.6.1.4.1.890.1.5.13.13.5.3.1.3 | ColumnvoltageConfLowThreshold | read-write | current | Voltage low threshold. |
| 1.3.6.1.4.1.890.1.5.13.13.5.3.1.4 | ColumnvoltageConfCardType | read-only | current | Card type of Voltage threshold |
| 1.3.6.1.4.1.890.1.5.13.13.5.4 | TablefanStatsTable | not-accessible | current | A table that contains rpm information about the fans. |
| 1.3.6.1.4.1.890.1.5.13.13.5.4.1 | RowfanStatsEntry | not-accessible | current | |
| 1.3.6.1.4.1.890.1.5.13.13.5.4.1.1 | ColumnfanRpmCurValue | read-only | current | The current rpm of the fan. |
| 1.3.6.1.4.1.890.1.5.13.13.5.4.1.2 | ColumnfanRpmMaxValue | read-only | current | The maximum rpm ever performed by the fan. |
| 1.3.6.1.4.1.890.1.5.13.13.5.4.1.3 | ColumnfanRpmMinValue | read-only | current | The minimum rpm ever performed by the fan. |
| 1.3.6.1.4.1.890.1.5.13.13.5.4.1.4 | ColumnfanRpmAvgValue | read-only | current | The average rpm performed by the fan. |
| 1.3.6.1.4.1.890.1.5.13.13.5.4.1.5 | ColumnfanRpmDescr | read-only | current | The description of the fan (e.g. location, function, etc.). |
| 1.3.6.1.4.1.890.1.5.13.13.5.5 | TabletemperatureStatsTable | not-accessible | current | A table that contains temperature information. |
| 1.3.6.1.4.1.890.1.5.13.13.5.5.1 | RowtemperatureStatsEntry | not-accessible | current | This is a temperature statistatics since system restarted. |
| 1.3.6.1.4.1.890.1.5.13.13.5.5.1.1 | ColumntemperatureCurValue | read-only | current | The current temperature detected by the sensor. |
| 1.3.6.1.4.1.890.1.5.13.13.5.5.1.2 | ColumntemperatureMaxValue | read-only | current | The maximum temperature detected by the sensor since system restarted. |
| 1.3.6.1.4.1.890.1.5.13.13.5.5.1.3 | ColumntemperatureMinValue | read-only | current | The minimum temperature detected by the sensor since system restarted. |
| 1.3.6.1.4.1.890.1.5.13.13.5.5.1.4 | ColumntemperatureAvgValue | read-only | current | The average temperature is calculated/aveaged by software based on current temperature values since system restarted. |
| 1.3.6.1.4.1.890.1.5.13.13.5.5.1.5 | ColumntemperatureDescr | read-only | current | The description of the temperature sensor (e.g. CPU for temperatureConfIndex 3). |
| 1.3.6.1.4.1.890.1.5.13.13.5.6 | TablevoltageStatsTable | not-accessible | current | A table that contains voltage information about the system. |
| 1.3.6.1.4.1.890.1.5.13.13.5.6.1 | RowvoltageStatsEntry | not-accessible | current | This is a voltage statistics since system restarted. |
| 1.3.6.1.4.1.890.1.5.13.13.5.6.1.1 | ColumnvoltageCurValue | read-only | current | The current voltage detected by the sensor. |
| 1.3.6.1.4.1.890.1.5.13.13.5.6.1.2 | ColumnvoltageMaxValue | read-only | current | The maximum voltage detected by the sensor since system restarted. |
| 1.3.6.1.4.1.890.1.5.13.13.5.6.1.3 | ColumnvoltageMinValue | read-only | current | The minimum voltage detected by the sensor since system restarted. |
| 1.3.6.1.4.1.890.1.5.13.13.5.6.1.4 | ColumnvoltageAvgValue | read-only | current | The average voltage calculated/averaged by software based on current voltage values since system restarted. |
| 1.3.6.1.4.1.890.1.5.13.13.5.6.1.5 | ColumnvoltageNominalValue | read-only | current | The nominal voltage which the power should be supplied. This is information from hardware board design |
| 1.3.6.1.4.1.890.1.5.13.13.5.6.1.6 | ColumnvoltageDescr | read-only | current | The description of the voltage (e.g. +1.05V, a 1.05 Vdc voltage input). |
| 1.3.6.1.4.1.890.1.5.13.13.5.7 | TablefanModeConfTable | not-accessible | current | Configure the fan mode of fan module. |
| 1.3.6.1.4.1.890.1.5.13.13.5.7.1 | RowfanModeConfEntry | not-accessible | current | |
| 1.3.6.1.4.1.890.1.5.13.13.5.7.1.1 | ColumnfanModeConfGroup | read-only | current | FAN group |
| 1.3.6.1.4.1.890.1.5.13.13.5.7.1.2 | ColumnfanModeConfStatus | read-write | current | Set the fan mode. average : fan duty-cycle with average temperature immediate : fan duty-cycle with immediate temperature fix : the mode displayed based on the… |
| 1.3.6.1.4.1.890.1.5.13.13.5.8 | TablefanDutyCycleConfTable | not-accessible | current | Configure the duty cycle of fan module. |
| 1.3.6.1.4.1.890.1.5.13.13.5.8.1 | RowfanDutyCycleConfEntry | not-accessible | current | |
| 1.3.6.1.4.1.890.1.5.13.13.5.8.1.1 | ColumnfanDutyCycleConfGroup | read-only | current | FAN group |
| 1.3.6.1.4.1.890.1.5.13.13.5.8.1.2 | ColumnfanDutyCycleConfPercentage | read-write | current | FAN duty cycle percentage |
| 1.3.6.1.4.1.890.1.5.13.13.5.9 | TablecpuStatsTable | not-accessible | current | Show cpu status. |
| 1.3.6.1.4.1.890.1.5.13.13.5.9.1 | RowcpuStatsEntry | not-accessible | current | Display the status of CPU loading. Index 0: Average CPU loading for the system. Index 1 ~ 8: CPU loading for per core. |
| 1.3.6.1.4.1.890.1.5.13.13.5.9.1.1 | ColumncpuStatsIndex | read-only | current | CPU Status index. |
| 1.3.6.1.4.1.890.1.5.13.13.5.9.1.2 | ColumncpuStatsHighThreshold | read-only | current | The High Threshold of CPU loading. |
| 1.3.6.1.4.1.890.1.5.13.13.5.9.1.3 | ColumncpuStatsCurrent | read-only | current | Current CPU loading. |
| 1.3.6.1.4.1.890.1.5.13.13.5.10 | TablememStatsTable | not-accessible | current | Show mem status. |
| 1.3.6.1.4.1.890.1.5.13.13.5.10.1 | RowmemStatsEntry | not-accessible | current | Display memory utilization. |
| 1.3.6.1.4.1.890.1.5.13.13.5.10.1.1 | ColumnmemStatsIndex | read-only | current | MEM Status index. |
| 1.3.6.1.4.1.890.1.5.13.13.5.10.1.2 | ColumnmemStatsHighThreshold | read-write | current | The High Threshold of memory. |
| 1.3.6.1.4.1.890.1.5.13.13.5.10.1.3 | ColumnmemStatsCurrent | read-only | current | Current Memory loading. |
| 1.3.6.1.4.1.890.1.5.13.13.5.11 | TablepowerStatsTable | not-accessible | current | A table that display the current vlaue for power module (only support on IES4204, not support on IES5206) |
| 1.3.6.1.4.1.890.1.5.13.13.5.11.1 | RowpowerStatsEntry | not-accessible | current | The entry of powerStatsTable (only support on IES4204, not support on IES5206) |
| 1.3.6.1.4.1.890.1.5.13.13.5.11.1.1 | ColumnpowerStatsIndex | read-only | current | The index for the power module |
| 1.3.6.1.4.1.890.1.5.13.13.5.11.1.2 | ColumnpowerStatsVoltage | read-only | current | Current power voltage(V) |
| 1.3.6.1.4.1.890.1.5.13.13.5.11.1.3 | ColumnpowerStatsTemperature | read-only | current | Current power temperature(C) |
| 1.3.6.1.4.1.890.1.5.13.13.5.11.1.4 | ColumnpowerStatsCurrent | read-only | current | Current power current(A) |
| 1.3.6.1.4.1.890.1.5.13.13.5.11.1.5 | ColumnpowerStatsPower | read-only | current | Current power power(W) |
| 1.3.6.1.4.1.890.1.5.13.13.6 | Nodeigmpmld | |||
| 1.3.6.1.4.1.890.1.5.13.13.6.1 | ScalarigmpmldMode | read-write | current | IGMP or MLD packet non-mvlan handling mode. disable(0) - disable IGMP or MLD function snooping(2) - packets are handled IGMP or MLD snopping function proxy(3) … |
| 1.3.6.1.4.1.890.1.5.13.13.6.2 | ScalarigmpmldVersion | read-write | current | Configures IGMP/MLD protocol version. |
| 1.3.6.1.4.1.890.1.5.13.13.6.3 | ScalarigmpmldLeaveMode | read-write | current | Configures IGMP/MLD leave mode Fast-leave:1 After checking last source IP is leaved, group timeout is immediately. No G-SQ send out. Last-member-query:2 After … |
| 1.3.6.1.4.1.890.1.5.13.13.6.4 | ScalarigmpmldLastMemberQueryInterval | read-write | current | Configures last member query interval 200~1000 in ms, in step of 100 |
| 1.3.6.1.4.1.890.1.5.13.13.6.5 | ScalarigmpmldLastMemberQueryRobustness | read-write | current | Configures last member query robusteness. |
| 1.3.6.1.4.1.890.1.5.13.13.6.6 | ScalarigmpmldGeneralQueryInterval | read-write | current | Configures genery query query interval. |
| 1.3.6.1.4.1.890.1.5.13.13.6.7 | ScalarigmpmldGeneralQueryRobustness | read-write | current | Configures genery query robustness. |
| 1.3.6.1.4.1.890.1.5.13.13.6.8 | ScalarigmpmldGeneralQueryMaxRespTime | read-write | current | Configures genery query maximum response time. |
| 1.3.6.1.4.1.890.1.5.13.13.6.9 | TableigmpmldConfPortTable | not-accessible | current | igmp/mld Conf Port Table. |
| 1.3.6.1.4.1.890.1.5.13.13.6.9.1 | RowigmpmldConfPortEntry | not-accessible | current | |
| 1.3.6.1.4.1.890.1.5.13.13.6.9.1.1 | ColumnigmpmldConfPortMaxGroupCount | read-write | current | Configures maximum group counts on the specified UNI ports. |
| 1.3.6.1.4.1.890.1.5.13.13.6.9.1.2 | ColumnigmpmldConfPortPrivilegeEnable | read-write | current | Enables group privilege checking on specified UNI ports. |
| 1.3.6.1.4.1.890.1.5.13.13.6.9.1.4 | ColumnigmpmldConfPortCacMaxBandwidth | read-write | current | Configures maximum CAC bandwidth on the specified UNI ports. 0 means no limited |
| 1.3.6.1.4.1.890.1.5.13.13.6.9.1.5 | ColumnigmpmldConfPortMaxMsgCount | read-write | current | Configures maximum message counts on the specified UNI ports. |
| 1.3.6.1.4.1.890.1.5.13.13.6.10 | NodegroupPrivilege | |||
| 1.3.6.1.4.1.890.1.5.13.13.6.10.1 | ScalarigmpmldMaxNumOfGroupPrivilegeProfiles | read-only | current | The maximum number of group privilege profiles supported by the system. |
| 1.3.6.1.4.1.890.1.5.13.13.6.10.2 | TableigmpmldGroupPrivilegeProfileTable | not-accessible | current | Multicast group privilege profile table |
| 1.3.6.1.4.1.890.1.5.13.13.6.10.2.1 | RowigmpmldGroupPrivilegeProfileEntry | not-accessible | current | |
| 1.3.6.1.4.1.890.1.5.13.13.6.10.2.1.1 | ColumnigmpmldGroupPrivilegeProfileName | read-only | current | Profile name |
| 1.3.6.1.4.1.890.1.5.13.13.6.10.2.1.2 | ColumnigmpmldGroupPrivilegeProfileIndex | read-only | current | Configures a privilege entry of specified group privilege profile. |
| 1.3.6.1.4.1.890.1.5.13.13.6.10.2.1.3 | ColumnigmpmldGroupPrivilegeProfileAddressType | read-create | current | The type of address format used for the igmpmldGroupPrivilegeProfileStartIp object and igmpmldGroupPrivilegeProfileEndIp object. |
| 1.3.6.1.4.1.890.1.5.13.13.6.10.2.1.4 | ColumnigmpmldGroupPrivilegeProfileStartIp | read-create | current | ipv4: 224.0.0.0 ~ 239.255.255.255, ipv6: ff00::0 ~ ffff:ffff:ffff:ffff:ffff:ffff:ffff:ffff |
| 1.3.6.1.4.1.890.1.5.13.13.6.10.2.1.5 | ColumnigmpmldGroupPrivilegeProfileEndIp | read-create | current | ipv4: 224.0.0.0 ~ 239.255.255.255, ipv6: ff00::0 ~ ffff:ffff:ffff:ffff:ffff:ffff:ffff:ffff |
| 1.3.6.1.4.1.890.1.5.13.13.6.10.2.1.6 | ColumnigmpmldGroupPrivilegeProfilePrivilege | read-create | current | forbid: deny groups delivery permit: allows groups delivery. preview: allows groups preview. |
| 1.3.6.1.4.1.890.1.5.13.13.6.10.2.1.7 | ColumnigmpmldGroupPrivilegeProfilePrivilegePreviewLength | read-create | current | length timer of preview privilege |
| 1.3.6.1.4.1.890.1.5.13.13.6.10.2.1.8 | ColumnigmpmldGroupPrivilegeProfilePrivilegePreviewInterval | read-create | current | interval timer of preview privilege |
| 1.3.6.1.4.1.890.1.5.13.13.6.10.2.1.9 | ColumnigmpmldGroupPrivilegeProfilePrivilegePreviewCount | read-create | current | preview count |
| 1.3.6.1.4.1.890.1.5.13.13.6.10.2.1.10 | ColumnigmpmldGroupPrivilegeProfilePrivilegePreviewReset | read-create | current | reset timer of preview privilege |
| 1.3.6.1.4.1.890.1.5.13.13.6.10.2.1.11 | ColumnigmpmldGroupPrivilegeProfileCacBandwidth | read-create | current | Multicast channel bandwidth for channel specified |
| 1.3.6.1.4.1.890.1.5.13.13.6.10.2.1.12 | ColumnigmpmldGroupPrivilegeProfileRowStatus | read-create | current | Row status of the table entry. To destroy the whole profile directly, use igmpmldGroupPrivilegeProfileIndex 0 to indicate this case. |
| 1.3.6.1.4.1.890.1.5.13.13.6.10.3 | TableigmpmldGroupPrivilegePortTable | not-accessible | current | Configures group privilege profile to UNI ports |
| 1.3.6.1.4.1.890.1.5.13.13.6.10.3.1 | RowigmpmldGroupPrivilegePortEntry | not-accessible | current | |
| 1.3.6.1.4.1.890.1.5.13.13.6.10.3.1.1 | ColumnigmpmldGroupPrivilegePortEntryRowStatus | read-create | current | Row status of the table entry. |
| 1.3.6.1.4.1.890.1.5.13.13.6.11 | Nodemvlan | |||
| 1.3.6.1.4.1.890.1.5.13.13.6.11.1 | ScalarigmpmldMaxNumOfMvlan | read-only | current | The maximum number of MVLAN supported by the system. |
| 1.3.6.1.4.1.890.1.5.13.13.6.11.2 | TableigmpmldMvlanTable | not-accessible | current | |
| 1.3.6.1.4.1.890.1.5.13.13.6.11.2.1 | RowigmpmldMvlanEntry | not-accessible | current | |
| 1.3.6.1.4.1.890.1.5.13.13.6.11.2.1.1 | ColumnigmpmldMvlanId | read-only | current | Specified MVLAN ID. |
| 1.3.6.1.4.1.890.1.5.13.13.6.11.2.1.2 | ColumnigmpmldMvlanRowStatus | read-create | current | Row status of the table entry. |
| 1.3.6.1.4.1.890.1.5.13.13.6.11.2.1.3 | ColumnigmpmldMvlanPbit | read-write | current | Configure the priority for specified mvlan group proxy report/leave/query, snooping report/leave/LMQ. <pbit>: 0~8. default 8. 8 stands for using incoming vlan,… |
| 1.3.6.1.4.1.890.1.5.13.13.6.11.3 | TableigmpmldMvlanPortTable | not-accessible | current | Joins specified UNI ports to MVLAN. |
| 1.3.6.1.4.1.890.1.5.13.13.6.11.3.1 | RowigmpmldMvlanPortEntry | not-accessible | current | |
| 1.3.6.1.4.1.890.1.5.13.13.6.11.3.1.1 | ColumnigmpmldMvlanPortUniVlan | read-create | current | Specifies the egress VLAN ID, 0 means untag. |
| 1.3.6.1.4.1.890.1.5.13.13.6.11.3.1.2 | ColumnigmpmldMvlanPortRowStatus | read-create | current | Row status of the table entry. |
| 1.3.6.1.4.1.890.1.5.13.13.6.11.4 | TableigmpmldMvlanMapTable | not-accessible | current | Configures N:1 VLAN mapping by group address. |
| 1.3.6.1.4.1.890.1.5.13.13.6.11.4.1 | RowigmpmldMvlanMapEntry | not-accessible | current | |
| 1.3.6.1.4.1.890.1.5.13.13.6.11.4.1.1 | ColumnigmpmldMvlanMapIndex | read-only | current | Configures a mapping entry of mvlan map table. |
| 1.3.6.1.4.1.890.1.5.13.13.6.11.4.1.2 | ColumnigmpmldMvlanMapStartIp | read-create | current | ipv4: 224.0.0.0 ~ 239.255.255.255, ipv6: ff00::0 ~ ffff:ffff:ffff:ffff:ffff:ffff:ffff:ffff |
| 1.3.6.1.4.1.890.1.5.13.13.6.11.4.1.3 | ColumnigmpmldMvlanMapEndIp | read-create | current | ipv4: 224.0.0.0 ~ 239.255.255.255, ipv6: ff00::0 ~ ffff:ffff:ffff:ffff:ffff:ffff:ffff:ffff |
| 1.3.6.1.4.1.890.1.5.13.13.6.11.4.1.4 | ColumnigmpmldMvlanMapRowStatus | read-create | current | Row status of the table entry. |
| 1.3.6.1.4.1.890.1.5.13.13.6.12 | Nodegroup | |||
| 1.3.6.1.4.1.890.1.5.13.13.6.12.3 | TableigmpmldMvlanGroupTable | not-accessible | current | This table includes igmpmld group by mvlan information. |
| 1.3.6.1.4.1.890.1.5.13.13.6.12.3.1 | RowigmpmldMvlanGroupEntry | not-accessible | current | An entry in igmpmldMvlanGroupTable. |
| 1.3.6.1.4.1.890.1.5.13.13.6.12.3.1.1 | ColumnigmpmldMvlanGroupId | read-only | current | Specified MVLAN ID. |
| 1.3.6.1.4.1.890.1.5.13.13.6.12.3.1.2 | ColumnigmpmldMvlanGroupAddressType | read-only | current | The type of address format used for the igmpmldGroupAddress object. |
| 1.3.6.1.4.1.890.1.5.13.13.6.12.3.1.3 | ColumnigmpmldMvlanGroupAddress | read-only | current | igmpmld group address |
| 1.3.6.1.4.1.890.1.5.13.13.6.12.3.1.4 | ColumnigmpmldMvlanGroupNumberOfMembers | read-only | current | number Of group members |
| 1.3.6.1.4.1.890.1.5.13.13.6.12.3.1.5 | ColumnigmpmldMvlanGroupNumberOfNewJoinedMembers | read-only | current | number Of new joined members |
| 1.3.6.1.4.1.890.1.5.13.13.6.12.3.1.6 | ColumnigmpmldMvlanGroupNumberOfLeftMembers | read-only | current | number Of left members |
| 1.3.6.1.4.1.890.1.5.13.13.6.12.4 | TableigmpmldMvlanGroupPortTable | not-accessible | current | This table includes igmpmld Group port by mvlan information. |
| 1.3.6.1.4.1.890.1.5.13.13.6.12.4.1 | RowigmpmldMvlanGroupPortEntry | not-accessible | current | An entry in igmpmldGroupPortTable. |
| 1.3.6.1.4.1.890.1.5.13.13.6.12.4.1.1 | ColumnigmpmldMvlanGroupCreateTime | read-only | current | createTime of igmpmld group |
| 1.3.6.1.4.1.890.1.5.13.13.6.12.4.1.2 | ColumnigmpmldMvlanGroupPortBandwidth | read-only | current | bandwidth of igmpmld group |
| 1.3.6.1.4.1.890.1.5.13.13.6.12.4.1.3 | ColumnigmpmldMvlanGroupPortPrivilege | read-only | current | privilege of igmpmld group |
| 1.3.6.1.4.1.890.1.5.13.13.6.12.4.1.4 | ColumnigmpmldMvlanGroupPortState | read-only | current | state of igmpmld group |
| 1.3.6.1.4.1.890.1.5.13.13.6.12.5 | TablemgmdQuerierIpTable | not-accessible | current | This table includes querier IP by mvlan information. |
| 1.3.6.1.4.1.890.1.5.13.13.6.12.5.1 | RowmgmdQuerierIpEntry | not-accessible | current | An entry in mgmdQuerierIpTable. |
| 1.3.6.1.4.1.890.1.5.13.13.6.12.5.1.1 | ColumnmgmdQuerierIpVid | read-only | current | Specified MVLAN ID. |
| 1.3.6.1.4.1.890.1.5.13.13.6.12.5.1.2 | ColumnmgmdQuerierIpAddressType | read-only | current | The type of address format used for the mgmdQuerierIpAddress object. |
| 1.3.6.1.4.1.890.1.5.13.13.6.12.5.1.3 | ColumnmgmdQuerierIpAddress | read-only | current | igmpmld QuerierIp address |
| 1.3.6.1.4.1.890.1.5.13.13.6.12.6 | TablemgmdClientSrcIpTable | not-accessible | current | This table includes client source IP on per Group. |
| 1.3.6.1.4.1.890.1.5.13.13.6.12.6.1 | RowmgmdClientSrcIpEntry | not-accessible | current | An entry in mgmdClientSrcIpTable. |
| 1.3.6.1.4.1.890.1.5.13.13.6.12.6.1.1 | ColumnmgmdClientSrcIpIndex | read-only | current | |
| 1.3.6.1.4.1.890.1.5.13.13.6.12.6.1.2 | ColumnmgmdClientSrcIpAddressType | read-only | current | |
| 1.3.6.1.4.1.890.1.5.13.13.6.12.6.1.3 | ColumnmgmdClientSrcIpAddress | read-only | current | |
| 1.3.6.1.4.1.890.1.5.13.13.6.13 | NodeigmpmldStatistics | |||
| 1.3.6.1.4.1.890.1.5.13.13.6.13.5 | TableigmpmldStatisticsPortTable | not-accessible | current | This table includes IGMP/MLD port statistics information |
| 1.3.6.1.4.1.890.1.5.13.13.6.13.5.1 | RowigmpmldStatisticsPortEntry | not-accessible | current | An entry in igmpmldStatisticsPortTable |
| 1.3.6.1.4.1.890.1.5.13.13.6.13.5.1.5 | ColumnigmpmldStatisticsPortQueryRx | read-only | current | The total number of IGMP query messages received. |
| 1.3.6.1.4.1.890.1.5.13.13.6.13.5.1.6 | ColumnigmpmldStatisticsPortQueryTx | read-only | current | The total number of IGMP query messages transmitted. |
| 1.3.6.1.4.1.890.1.5.13.13.6.13.5.1.16 | ColumnigmpmldStatisticsPortReportRx | read-only | current | The total number of IGMP/MLD report messages received |
| 1.3.6.1.4.1.890.1.5.13.13.6.13.5.1.17 | ColumnigmpmldStatisticsPortReportTx | read-only | current | The total number of IGMP/MLD report messages transmitted |
| 1.3.6.1.4.1.890.1.5.13.13.6.13.5.1.18 | ColumnigmpmldStatisticsPortReportJoinIgmpv2 | read-only | current | The total number of IGMPv2 join type report messages |
| 1.3.6.1.4.1.890.1.5.13.13.6.13.5.1.19 | ColumnigmpmldStatisticsPortReportLeaveIgmpv2 | read-only | current | The total number of IGMPv2 leave type report messages |
| 1.3.6.1.4.1.890.1.5.13.13.6.13.5.1.20 | ColumnigmpmldStatisticsPortReportDropIgmp | read-only | current | The total number of IGMP dropped report messages |
| 1.3.6.1.4.1.890.1.5.13.13.6.13.5.1.22 | ColumnigmpmldStatisticsPortReportJoinMldv1 | read-only | current | The total number of MLDv1 join type report messages |
| 1.3.6.1.4.1.890.1.5.13.13.6.13.5.1.23 | ColumnigmpmldStatisticsPortReportLeaveMldv1 | read-only | current | The total number of MLDv1 leave type report messages |
| 1.3.6.1.4.1.890.1.5.13.13.6.13.5.1.24 | ColumnigmpmldStatisticsPortReportDropMld | read-only | current | The total number of MLD dropped report messages |
| 1.3.6.1.4.1.890.1.5.13.13.6.13.5.1.25 | ColumnigmpmldStatisticsPortReportIgmpv3 | read-only | current | The total number of IGMPv3 report messages |
| 1.3.6.1.4.1.890.1.5.13.13.6.13.5.1.26 | ColumnigmpmldStatisticsPortReportMldv2 | read-only | current | The total number of MLDv2 report messages |
| 1.3.6.1.4.1.890.1.5.13.13.6.13.5.1.27 | ColumnigmpmldStatisticsPortQueryDropIgmp | read-only | current | The total number of IGMP dropped query messages |
| 1.3.6.1.4.1.890.1.5.13.13.6.13.5.1.28 | ColumnigmpmldStatisticsPortQueryDropMld | read-only | current | The total number of MLD dropped query messages |
| 1.3.6.1.4.1.890.1.5.13.13.6.13.5.1.29 | ColumnigmpmldStatisticsPortQueryIgmpv2 | read-only | current | The total number of IGMPv2 query messages |
| 1.3.6.1.4.1.890.1.5.13.13.6.13.5.1.30 | ColumnigmpmldStatisticsPortQueryIgmpv3 | read-only | current | The total number of IGMPv3 query messages |
| 1.3.6.1.4.1.890.1.5.13.13.6.13.5.1.31 | ColumnigmpmldStatisticsPortQueryMldv1 | read-only | current | The total number of MLDv1 query messages |
| 1.3.6.1.4.1.890.1.5.13.13.6.13.5.1.32 | ColumnigmpmldStatisticsPortQueryMldv2 | read-only | current | The total number of Mldv2 query messages |
| 1.3.6.1.4.1.890.1.5.13.13.6.13.6 | TablemgmdStatisticsPortTable | not-accessible | current | This table includes IGMP/MLD port statistics information |
| 1.3.6.1.4.1.890.1.5.13.13.6.13.6.1 | RowmgmdStatisticsPortEntry | not-accessible | current | An entry in mgmdStatisticsPortTable |
| 1.3.6.1.4.1.890.1.5.13.13.6.13.6.1.1 | ColumnigmpCounterPortRxQueryTotal | read-only | current | Total accepted IGMP RX query |
| 1.3.6.1.4.1.890.1.5.13.13.6.13.6.1.2 | ColumnigmpCounterPortRxQueryV1 | read-only | current | Accepted IGMP RX V1 query |
| 1.3.6.1.4.1.890.1.5.13.13.6.13.6.1.3 | ColumnigmpCounterPortRxQueryV2 | read-only | current | Accepted IGMP RX V2 query |
| 1.3.6.1.4.1.890.1.5.13.13.6.13.6.1.4 | ColumnigmpCounterPortRxQueryV3 | read-only | current | Accepted IGMP RX V3 query |
| 1.3.6.1.4.1.890.1.5.13.13.6.13.6.1.5 | ColumnigmpCounterPortRxQuerySpecific | read-only | current | Accepted IGMP RX specific query |
| 1.3.6.1.4.1.890.1.5.13.13.6.13.6.1.6 | ColumnigmpCounterPortRxQueryDrop | read-only | current | IGMP RX Drop query Condition: Query from UNI port DTag Query IGMP Disabled |
| 1.3.6.1.4.1.890.1.5.13.13.6.13.6.1.7 | ColumnigmpCounterPortRxReportTotal | read-only | current | Total accepted IGMP RX report+leave |
| 1.3.6.1.4.1.890.1.5.13.13.6.13.6.1.8 | ColumnigmpCounterPortRxReportV1 | read-only | current | Accepted IGMP RX V1 report |
| 1.3.6.1.4.1.890.1.5.13.13.6.13.6.1.9 | ColumnigmpCounterPortRxReportV2 | read-only | current | Accepted IGMP RX V2 report |
| 1.3.6.1.4.1.890.1.5.13.13.6.13.6.1.10 | ColumnigmpCounterPortRxReportV3 | read-only | current | Accepted IGMP RX V3 report |
| 1.3.6.1.4.1.890.1.5.13.13.6.13.6.1.11 | ColumnigmpCounterPortRxReportV2Leave | read-only | current | Accepted IGMP RX V2 leave |
| 1.3.6.1.4.1.890.1.5.13.13.6.13.6.1.12 | ColumnigmpCounterPortRxReportDropByRate | read-only | current | IGMP RX report reached max message |
| 1.3.6.1.4.1.890.1.5.13.13.6.13.6.1.13 | ColumnigmpCounterPortRxReportDrop | read-only | current | Drop IGMP Rx report Condition: DTag report Report from NNI V3 report under V2 mode |
| 1.3.6.1.4.1.890.1.5.13.13.6.13.6.1.14 | ColumnigmpCounterPortRxReportUnknown | read-only | current | Drop IGMP RX report. Not match configured version |
| 1.3.6.1.4.1.890.1.5.13.13.6.13.6.1.15 | ColumnigmpCounterPortTxQueryTotal | read-only | current | Total transmitted IGMP query |
| 1.3.6.1.4.1.890.1.5.13.13.6.13.6.1.16 | ColumnigmpCounterPortTxQueryV1 | read-only | current | Transmitted IGMP V1 query |
| 1.3.6.1.4.1.890.1.5.13.13.6.13.6.1.17 | ColumnigmpCounterPortTxQueryV2 | read-only | current | Transmitted IGMP V2 query |
| 1.3.6.1.4.1.890.1.5.13.13.6.13.6.1.18 | ColumnigmpCounterPortTxQueryV3 | read-only | current | Transmitted IGMP V3 query |
| 1.3.6.1.4.1.890.1.5.13.13.6.13.6.1.19 | ColumnigmpCounterPortTxQuerySpecific | read-only | current | Transmitted IGMP specific query |
| 1.3.6.1.4.1.890.1.5.13.13.6.13.6.1.20 | ColumnigmpCounterPortTxReportTotal | read-only | current | Total transmitted IGMP report |
| 1.3.6.1.4.1.890.1.5.13.13.6.13.6.1.21 | ColumnigmpCounterPortTxReportV1 | read-only | current | Transmitted IGMP V1 report |
| 1.3.6.1.4.1.890.1.5.13.13.6.13.6.1.22 | ColumnigmpCounterPortTxReportV2 | read-only | current | Transmitted IGMP V2 report |
| 1.3.6.1.4.1.890.1.5.13.13.6.13.6.1.23 | ColumnigmpCounterPortTxReportV3 | read-only | current | Transmitted IGMP V3 report |
| 1.3.6.1.4.1.890.1.5.13.13.6.13.6.1.24 | ColumnigmpCounterPortTxReportV2Leave | read-only | current | Transmitted IGMP V2 Leave |
| 1.3.6.1.4.1.890.1.5.13.13.6.13.6.1.25 | ColumnigmpCounterPortJoinedGroup | read-only | current | Specific counter(count by each V3 record or V2 report) Number of current IGMP joined group |
| 1.3.6.1.4.1.890.1.5.13.13.6.13.6.1.26 | ColumnigmpCounterPortJoin | read-only | current | Specific counter(count by each V3 record or V2 report) Condition: V2: accepted IGMP report V3: join group record |
| 1.3.6.1.4.1.890.1.5.13.13.6.13.6.1.27 | ColumnigmpCounterPortLeave | read-only | current | Specific counter(count by each V3 record or V2 report) Condition: V2: accepted IGMP leave V3: leave group record |
| 1.3.6.1.4.1.890.1.5.13.13.6.13.6.1.28 | ColumnigmpCounterPortDropByMaxGroup | read-only | current | Specific counter(count by each V3 record or V2 report) Reached max group |
| 1.3.6.1.4.1.890.1.5.13.13.6.13.6.1.29 | ColumnigmpCounterPortDropByPrivilege | read-only | current | Specific counter(count by each V3 record or V2 report) forbid privilege |
| 1.3.6.1.4.1.890.1.5.13.13.6.13.6.1.30 | ColumnigmpCounterPortDropByMvlan | read-only | current | Specific counter(count by each V3 record or V2 report) Condition: Port doesnot join mvlan Group doesnot match mvlan range |
| 1.3.6.1.4.1.890.1.5.13.13.6.13.6.1.31 | ColumnigmpCounterPortDropByOthers | read-only | current | Specific counter(count by each V3 record or V2 report) Condition: Reached max bandwidth Disable privilege profile No privilege profile Preview forbid Preview m… |
| 1.3.6.1.4.1.890.1.5.13.13.6.13.6.1.32 | ColumnmldCounterPortRxQueryTotal | read-only | current | Total accepted MLD RX query |
| 1.3.6.1.4.1.890.1.5.13.13.6.13.6.1.33 | ColumnmldCounterPortRxQueryV1 | read-only | current | Accepted MLD RX V1 query |
| 1.3.6.1.4.1.890.1.5.13.13.6.13.6.1.34 | ColumnmldCounterPortRxQueryV2 | read-only | current | Accepted MLD RX V2 query |
| 1.3.6.1.4.1.890.1.5.13.13.6.13.6.1.35 | ColumnmldCounterPortRxQuerySpecific | read-only | current | Accepted MLD RX specific query |
| 1.3.6.1.4.1.890.1.5.13.13.6.13.6.1.36 | ColumnmldCounterPortRxQueryDrop | read-only | current | MLD RX Drop query Condition: Query from UNI port DTag Query IGMP Disabled |
| 1.3.6.1.4.1.890.1.5.13.13.6.13.6.1.37 | ColumnmldCounterPortRxReportTotal | read-only | current | Total accepted MLD RX report+leave |
| 1.3.6.1.4.1.890.1.5.13.13.6.13.6.1.38 | ColumnmldCounterPortRxReportV1 | read-only | current | Accepted MLD RX V1 report |
| 1.3.6.1.4.1.890.1.5.13.13.6.13.6.1.39 | ColumnmldCounterPortRxReportV2 | read-only | current | Accepted MLD RX V2 report |
| 1.3.6.1.4.1.890.1.5.13.13.6.13.6.1.40 | ColumnmldCounterPortRxReportV1Leave | read-only | current | Accepted MLD RX V1 leave |
| 1.3.6.1.4.1.890.1.5.13.13.6.13.6.1.41 | ColumnmldCounterPortRxReportDropByRate | read-only | current | MLD RX report reached max message |
| 1.3.6.1.4.1.890.1.5.13.13.6.13.6.1.42 | ColumnmldCounterPortRxReportDrop | read-only | current | Drop MLD Rx report Condition: DTag report Report from NNI V2 report under V1 mode |
| 1.3.6.1.4.1.890.1.5.13.13.6.13.6.1.43 | ColumnmldCounterPortRxReportUnknown | read-only | current | Drop MLD RX report. Not match configured version |
| 1.3.6.1.4.1.890.1.5.13.13.6.13.6.1.44 | ColumnmldCounterPortTxQueryTotal | read-only | current | Total transmitted MLD query |
| 1.3.6.1.4.1.890.1.5.13.13.6.13.6.1.45 | ColumnmldCounterPortTxQueryV1 | read-only | current | Transmitted MLD V1 query |
| 1.3.6.1.4.1.890.1.5.13.13.6.13.6.1.46 | ColumnmldCounterPortTxQueryV2 | read-only | current | Transmitted MLD V2 query |
| 1.3.6.1.4.1.890.1.5.13.13.6.13.6.1.47 | ColumnmldCounterPortTxQuerySpecific | read-only | current | Transmitted MLD specific query |
| 1.3.6.1.4.1.890.1.5.13.13.6.13.6.1.48 | ColumnmldCounterPortTxReportTotal | read-only | current | Total transmitted MLD report |
| 1.3.6.1.4.1.890.1.5.13.13.6.13.6.1.49 | ColumnmldCounterPortTxReportV1 | read-only | current | Transmitted MLD V1 report |
| 1.3.6.1.4.1.890.1.5.13.13.6.13.6.1.50 | ColumnmldCounterPortTxReportV2 | read-only | current | Transmitted MLD V2 report |
| 1.3.6.1.4.1.890.1.5.13.13.6.13.6.1.51 | ColumnmldCounterPortTxReportV1Leave | read-only | current | Transmitted MLD V1 Leave |
| 1.3.6.1.4.1.890.1.5.13.13.6.13.6.1.52 | ColumnmldCounterPortJoinedGroup | read-only | current | Specific counter(count by each V2 record or V1 report) Number of current MLD joined group |
| 1.3.6.1.4.1.890.1.5.13.13.6.13.6.1.53 | ColumnmldCounterPortJoin | read-only | current | Specific counter(count by each V2 record or V1 report) Condition: V1: accepted MLD report V2: join group record |
| 1.3.6.1.4.1.890.1.5.13.13.6.13.6.1.54 | ColumnmldCounterPortLeave | read-only | current | Specific counter(count by each V2 record or V1 report) Condition: V1: accepted MLD leave V2: leave group record |
| 1.3.6.1.4.1.890.1.5.13.13.6.13.6.1.55 | ColumnmldCounterPortDropByMaxGroup | read-only | current | Specific counter(count by each V2 record or V1 report) Reached max group |
| 1.3.6.1.4.1.890.1.5.13.13.6.13.6.1.56 | ColumnmldCounterPortDropByPrivilege | read-only | current | Specific counter(count by each V2 record or V1 report) forbid privilege |
| 1.3.6.1.4.1.890.1.5.13.13.6.13.6.1.57 | ColumnmldCounterPortDropByMvlan | read-only | current | Specific counter(count by each V2 record or V1 report) Condition: Port doesnot join mvlan Group doesnot match mvlan range |
| 1.3.6.1.4.1.890.1.5.13.13.6.13.6.1.58 | ColumnmldCounterPortDropByOthers | read-only | current | Specific counter(count by each V2 record or V1 report) Condition: Reached max bandwidth Disable privilege profile No privilege profile Preview forbid Preview m… |
| 1.3.6.1.4.1.890.1.5.13.13.6.13.7 | TablemgmdStatisticsVlanTable | not-accessible | current | This table includes IGMP/MLD VLAN statistics information |
| 1.3.6.1.4.1.890.1.5.13.13.6.13.7.1 | RowmgmdStatisticsVlanEntry | not-accessible | current | An entry in mgmdStatisticsVlanTable |
| 1.3.6.1.4.1.890.1.5.13.13.6.13.7.1.1 | ColumnmgmdCounterVlanId | read-only | current | VLAN id |
| 1.3.6.1.4.1.890.1.5.13.13.6.13.7.1.2 | ColumnigmpCounterVlanRxQueryTotal | read-only | current | Total accepted IGMP RX query |
| 1.3.6.1.4.1.890.1.5.13.13.6.13.7.1.3 | ColumnigmpCounterVlanRxQueryV1 | read-only | current | Accepted IGMP RX V1 query |
| 1.3.6.1.4.1.890.1.5.13.13.6.13.7.1.4 | ColumnigmpCounterVlanRxQueryV2 | read-only | current | Accepted IGMP RX V2 query |
| 1.3.6.1.4.1.890.1.5.13.13.6.13.7.1.5 | ColumnigmpCounterVlanRxQueryV3 | read-only | current | Accepted IGMP RX V3 query |
| 1.3.6.1.4.1.890.1.5.13.13.6.13.7.1.6 | ColumnigmpCounterVlanRxQuerySpecific | read-only | current | Accepted IGMP RX specific query |
| 1.3.6.1.4.1.890.1.5.13.13.6.13.7.1.7 | ColumnigmpCounterVlanRxQueryDrop | read-only | current | IGMP RX Drop query Condition: Query from UNI port DTag Query IGMP Disabled |
| 1.3.6.1.4.1.890.1.5.13.13.6.13.7.1.8 | ColumnigmpCounterVlanRxReportTotal | read-only | current | Total accepted IGMP RX report+leave |
| 1.3.6.1.4.1.890.1.5.13.13.6.13.7.1.9 | ColumnigmpCounterVlanRxReportV1 | read-only | current | Accepted IGMP RX V1 report |
| 1.3.6.1.4.1.890.1.5.13.13.6.13.7.1.10 | ColumnigmpCounterVlanRxReportV2 | read-only | current | Accepted IGMP RX V2 report |
| 1.3.6.1.4.1.890.1.5.13.13.6.13.7.1.11 | ColumnigmpCounterVlanRxReportV3 | read-only | current | Accepted IGMP RX V3 report |
| 1.3.6.1.4.1.890.1.5.13.13.6.13.7.1.12 | ColumnigmpCounterVlanRxReportV2Leave | read-only | current | Accepted IGMP RX V2 leave |
| 1.3.6.1.4.1.890.1.5.13.13.6.13.7.1.13 | ColumnigmpCounterVlanRxReportDropByRate | read-only | current | IGMP RX report reached max message |
| 1.3.6.1.4.1.890.1.5.13.13.6.13.7.1.14 | ColumnigmpCounterVlanRxReportDrop | read-only | current | Drop IGMP Rx report Condition: DTag report Report from NNI V3 report under V2 mode |
| 1.3.6.1.4.1.890.1.5.13.13.6.13.7.1.15 | ColumnigmpCounterVlanRxReportUnknown | read-only | current | Drop IGMP RX report. Not match configured version |
| 1.3.6.1.4.1.890.1.5.13.13.6.13.7.1.16 | ColumnigmpCounterVlanTxQueryTotal | read-only | current | Total transmitted IGMP query |
| 1.3.6.1.4.1.890.1.5.13.13.6.13.7.1.17 | ColumnigmpCounterVlanTxQueryV1 | read-only | current | Transmitted IGMP V1 query |
| 1.3.6.1.4.1.890.1.5.13.13.6.13.7.1.18 | ColumnigmpCounterVlanTxQueryV2 | read-only | current | Transmitted IGMP V2 query |
| 1.3.6.1.4.1.890.1.5.13.13.6.13.7.1.19 | ColumnigmpCounterVlanTxQueryV3 | read-only | current | Transmitted IGMP V3 query |
| 1.3.6.1.4.1.890.1.5.13.13.6.13.7.1.20 | ColumnigmpCounterVlanTxQuerySpecific | read-only | current | Transmitted IGMP specific query |
| 1.3.6.1.4.1.890.1.5.13.13.6.13.7.1.21 | ColumnigmpCounterVlanTxReportTotal | read-only | current | Total transmitted IGMP report |
| 1.3.6.1.4.1.890.1.5.13.13.6.13.7.1.22 | ColumnigmpCounterVlanTxReportV1 | read-only | current | Transmitted IGMP V1 report |
| 1.3.6.1.4.1.890.1.5.13.13.6.13.7.1.23 | ColumnigmpCounterVlanTxReportV2 | read-only | current | Transmitted IGMP V2 report |
| 1.3.6.1.4.1.890.1.5.13.13.6.13.7.1.24 | ColumnigmpCounterVlanTxReportV3 | read-only | current | Transmitted IGMP V3 report |
| 1.3.6.1.4.1.890.1.5.13.13.6.13.7.1.25 | ColumnigmpCounterVlanTxReportV2Leave | read-only | current | Transmitted IGMP V2 Leave |
| 1.3.6.1.4.1.890.1.5.13.13.6.13.7.1.26 | ColumnigmpCounterVlanJoinedGroup | read-only | current | Specific counter(count by each V3 record or V2 report) Number of current IGMP joined group |
| 1.3.6.1.4.1.890.1.5.13.13.6.13.7.1.27 | ColumnigmpCounterVlanJoin | read-only | current | Specific counter(count by each V3 record or V2 report) Condition: V2: accepted IGMP report V3: join group record |
| 1.3.6.1.4.1.890.1.5.13.13.6.13.7.1.28 | ColumnigmpCounterVlanLeave | read-only | current | Specific counter(count by each V3 record or V2 report) Condition: V2: accepted IGMP leave V3: leave group record |
| 1.3.6.1.4.1.890.1.5.13.13.6.13.7.1.29 | ColumnigmpCounterVlanDropByMaxGroup | read-only | current | Specific counter(count by each V3 record or V2 report) Reached max group |
| 1.3.6.1.4.1.890.1.5.13.13.6.13.7.1.30 | ColumnigmpCounterVlanDropByPrivilege | read-only | current | Specific counter(count by each V3 record or V2 report) forbid privilege |
| 1.3.6.1.4.1.890.1.5.13.13.6.13.7.1.31 | ColumnigmpCounterVlanDropByMvlan | read-only | current | Specific counter(count by each V3 record or V2 report) Condition: Port doesnot join mvlan Group doesnot match mvlan range |
| 1.3.6.1.4.1.890.1.5.13.13.6.13.7.1.32 | ColumnigmpCounterVlanDropByOthers | read-only | current | Specific counter(count by each V3 record or V2 report) Condition: Reached max bandwidth Disable privilege profile No privilege profile Preview forbid Preview m… |
| 1.3.6.1.4.1.890.1.5.13.13.6.13.7.1.33 | ColumnmldCounterVlanRxQueryTotal | read-only | current | Total accepted MLD RX query |
| 1.3.6.1.4.1.890.1.5.13.13.6.13.7.1.34 | ColumnmldCounterVlanRxQueryV1 | read-only | current | Accepted MLD RX V1 query |
| 1.3.6.1.4.1.890.1.5.13.13.6.13.7.1.35 | ColumnmldCounterVlanRxQueryV2 | read-only | current | Accepted MLD RX V2 query |
| 1.3.6.1.4.1.890.1.5.13.13.6.13.7.1.36 | ColumnmldCounterVlanRxQuerySpecific | read-only | current | Accepted MLD RX specific query |
| 1.3.6.1.4.1.890.1.5.13.13.6.13.7.1.37 | ColumnmldCounterVlanRxQueryDrop | read-only | current | MLD RX Drop query Condition: Query from UNI port DTag Query IGMP Disabled |
| 1.3.6.1.4.1.890.1.5.13.13.6.13.7.1.38 | ColumnmldCounterVlanRxReportTotal | read-only | current | Total accepted MLD RX report+leave |
| 1.3.6.1.4.1.890.1.5.13.13.6.13.7.1.39 | ColumnmldCounterVlanRxReportV1 | read-only | current | Accepted MLD RX V1 report |
| 1.3.6.1.4.1.890.1.5.13.13.6.13.7.1.40 | ColumnmldCounterVlanRxReportV2 | read-only | current | Accepted MLD RX V2 report |
| 1.3.6.1.4.1.890.1.5.13.13.6.13.7.1.41 | ColumnmldCounterVlanRxReportV1Leave | read-only | current | Accepted MLD RX V1 leave |
| 1.3.6.1.4.1.890.1.5.13.13.6.13.7.1.42 | ColumnmldCounterVlanRxReportDropByRate | read-only | current | MLD RX report reached max message |
| 1.3.6.1.4.1.890.1.5.13.13.6.13.7.1.43 | ColumnmldCounterVlanRxReportDrop | read-only | current | Drop MLD Rx report Condition: DTag report Report from NNI V2 report under V1 mode |
| 1.3.6.1.4.1.890.1.5.13.13.6.13.7.1.44 | ColumnmldCounterVlanRxReportUnknown | read-only | current | Drop MLD RX report. Not match configured version |
| 1.3.6.1.4.1.890.1.5.13.13.6.13.7.1.45 | ColumnmldCounterVlanTxQueryTotal | read-only | current | Total transmitted MLD query |
| 1.3.6.1.4.1.890.1.5.13.13.6.13.7.1.46 | ColumnmldCounterVlanTxQueryV1 | read-only | current | Transmitted MLD V1 query |
| 1.3.6.1.4.1.890.1.5.13.13.6.13.7.1.47 | ColumnmldCounterVlanTxQueryV2 | read-only | current | Transmitted MLD V2 query |
| 1.3.6.1.4.1.890.1.5.13.13.6.13.7.1.48 | ColumnmldCounterVlanTxQuerySpecific | read-only | current | Transmitted MLD specific query |
| 1.3.6.1.4.1.890.1.5.13.13.6.13.7.1.49 | ColumnmldCounterVlanTxReportTotal | read-only | current | Total transmitted MLD report |
| 1.3.6.1.4.1.890.1.5.13.13.6.13.7.1.50 | ColumnmldCounterVlanTxReportV1 | read-only | current | Transmitted MLD V1 report |
| 1.3.6.1.4.1.890.1.5.13.13.6.13.7.1.51 | ColumnmldCounterVlanTxReportV2 | read-only | current | Transmitted MLD V2 report |
| 1.3.6.1.4.1.890.1.5.13.13.6.13.7.1.52 | ColumnmldCounterVlanTxReportV1Leave | read-only | current | Transmitted MLD V1 Leave |
| 1.3.6.1.4.1.890.1.5.13.13.6.13.7.1.53 | ColumnmldCounterVlanJoinedGroup | read-only | current | Specific counter(count by each V2 record or V1 report) Number of current MLD joined group |
| 1.3.6.1.4.1.890.1.5.13.13.6.13.7.1.54 | ColumnmldCounterVlanJoin | read-only | current | Specific counter(count by each V2 record or V1 report) Condition: V1: accepted MLD report V2: join group record |
| 1.3.6.1.4.1.890.1.5.13.13.6.13.7.1.55 | ColumnmldCounterVlanLeave | read-only | current | Specific counter(count by each V2 record or V1 report) Condition: V1: accepted MLD leave V2: leave group record |
| 1.3.6.1.4.1.890.1.5.13.13.6.13.7.1.56 | ColumnmldCounterVlanDropByMaxGroup | read-only | current | Specific counter(count by each V2 record or V1 report) Reached max group |
| 1.3.6.1.4.1.890.1.5.13.13.6.13.7.1.57 | ColumnmldCounterVlanDropByPrivilege | read-only | current | Specific counter(count by each V2 record or V1 report) forbid privilege |
| 1.3.6.1.4.1.890.1.5.13.13.6.13.7.1.58 | ColumnmldCounterVlanDropByMvlan | read-only | current | Specific counter(count by each V2 record or V1 report) Condition: Port doesnot join mvlan Group doesnot match mvlan range |
| 1.3.6.1.4.1.890.1.5.13.13.6.13.7.1.59 | ColumnmldCounterVlanDropByOthers | read-only | current | Specific counter(count by each V2 record or V1 report) Condition: Reached max bandwidth Disable privilege profile No privilege profile Preview forbid Preview m… |
| 1.3.6.1.4.1.890.1.5.13.13.6.13.8 | TablemgmdStatisticsOldVerTable | not-accessible | current | This table includes IGMP/MLD port older version compatible information |
| 1.3.6.1.4.1.890.1.5.13.13.6.13.8.1 | RowmgmdStatisticsOldVerEntry | not-accessible | current | An entry in mgmdStatisticsOldVerTable |
| 1.3.6.1.4.1.890.1.5.13.13.6.13.8.1.1 | ColumnmgmdOlderVerQuerierIGMPv2 | read-only | current | IGMPv2 report ever received. 1 means had received. |
| 1.3.6.1.4.1.890.1.5.13.13.6.13.8.1.2 | ColumnmgmdOlderVerQuerierMLDv1 | read-only | current | MLDv1 report ever received. 1 means had received |
| 1.3.6.1.4.1.890.1.5.13.13.6.13.8.1.3 | ColumnmgmdOlderVerHostIGMPv2 | read-only | current | IGMPv2 Query ever received. 1 means had received |
| 1.3.6.1.4.1.890.1.5.13.13.6.13.8.1.4 | ColumnmgmdOlderVerHostMLDv1 | read-only | current | MLDv1 Query ever received. 1 means had received |
| 1.3.6.1.4.1.890.1.5.13.13.6.14 | NodeigmpmldLogs | |||
| 1.3.6.1.4.1.890.1.5.13.13.6.14.1 | TableigmpmldLogsPortTable | not-accessible | current | This table includes IGMP/MLD port statistics information |
| 1.3.6.1.4.1.890.1.5.13.13.6.14.1.1 | RowigmpmldLogsPortEntry | not-accessible | current | An entry in igmpmldStatisticsPortTable |
| 1.3.6.1.4.1.890.1.5.13.13.6.14.1.1.1 | ColumnigmpmldLogsPortTime | read-only | current | The time of a log entry |
| 1.3.6.1.4.1.890.1.5.13.13.6.14.1.1.2 | ColumnigmpmldLogsPortSerialNo | read-only | current | The serial number is used to identify the order of logs in the same seconds |
| 1.3.6.1.4.1.890.1.5.13.13.6.14.1.1.3 | ColumnigmpmldLogsPortEvent | read-only | current | The event type of a log entry: join(0) - event of user join a multicast group leave(1) - event of user leave a multicast group drop(2) - event of system drop a… |
| 1.3.6.1.4.1.890.1.5.13.13.6.14.1.1.4 | ColumnigmpmldLogsPortGroupAddressType | read-only | current | The type of address format used for the igmpmldLogsPortGroupAddress |
| 1.3.6.1.4.1.890.1.5.13.13.6.14.1.1.5 | ColumnigmpmldLogsPortGroupAddress | read-only | current | The group address of a log entry |
| 1.3.6.1.4.1.890.1.5.13.13.6.15 | NodeigmpmldOps | |||
| 1.3.6.1.4.1.890.1.5.13.13.6.15.1 | ScalarigmpmldTarget | read-write | current | Specifies the target NNI/UNI ifindex or vid for igmpmldmldOperation |
| 1.3.6.1.4.1.890.1.5.13.13.6.15.2 | ScalarigmpmldOperation | read-write | current | Clear packet statistics clearIGMPMLDPacketStatistics(1) - clear system-wized packet counters clearIGMPMLDPacketStatisticsOnSpecifiedUNIports(2) - clear packet … |
| 1.3.6.1.4.1.890.1.5.13.13.6.16 | ScalarigmpmldPbit | read-write | current | Configure the priority for non-mvlan group proxy report/leave/query, snooping report/leave/LMQ. <pbit>: 0~8. default 8. 8 stands for using incoming vlan, but a… |
| 1.3.6.1.4.1.890.1.5.13.13.6.17 | ScalarigmpmldMvlanMode | read-write | current | IGMP or MLD packet mvlan handling mode. disable(0) - disable IGMP or MLD function snooping(2) - packets are handled IGMP or MLD snopping function proxy(3) - pa… |
| 1.3.6.1.4.1.890.1.5.13.13.6.18 | TableigmpmldGenniPortTable | not-accessible | current | igmp/mld Genni Configure the NNI port query behavior. |
| 1.3.6.1.4.1.890.1.5.13.13.6.18.1 | RowigmpmldGenniPortEntry | not-accessible | current | |
| 1.3.6.1.4.1.890.1.5.13.13.6.18.1.1 | ColumnigmpmldGenniPortStaticQuerier | read-write | current | 0 - auto :become a query channel after received query. 1 - static : always a query channel; 2 - edge : drop query |
| 1.3.6.1.4.1.890.1.5.13.13.7 | Nodeip | |||
| 1.3.6.1.4.1.890.1.5.13.13.7.1 | NodeipArp | |||
| 1.3.6.1.4.1.890.1.5.13.13.7.1.1 | ScalaripArpOps | read-write | current | Flush ARP table. |
| 1.3.6.1.4.1.890.1.5.13.13.7.1.2 | TableipArpTable | not-accessible | current | Display the arp table. |
| 1.3.6.1.4.1.890.1.5.13.13.7.1.2.1 | RowipArpEntry | not-accessible | current | |
| 1.3.6.1.4.1.890.1.5.13.13.7.1.2.1.1 | ColumnipAddress | read-only | current | The IP that is learned in ARP table. |
| 1.3.6.1.4.1.890.1.5.13.13.7.1.2.1.2 | ColumnmacAddress | read-only | current | The correspond mac address of the ipAddress. |
| 1.3.6.1.4.1.890.1.5.13.13.7.1.2.1.3 | ColumnipInterface | read-only | current | The interface that the ipAddress is learned. |
| 1.3.6.1.4.1.890.1.5.13.13.7.2 | NodeipInband | |||
| 1.3.6.1.4.1.890.1.5.13.13.7.2.1 | ScalaripInbandAddress | read-write | current | Sets the in-band management interface IP address (0.0.0.1 ~ 223.255.255.255). |
| 1.3.6.1.4.1.890.1.5.13.13.7.2.2 | ScalaripInbandNetmask | read-write | current | Sets the in-band management interface subnet mask. |
| 1.3.6.1.4.1.890.1.5.13.13.7.2.3 | ScalaripInbandMgmtVlan | read-write | current | Sets in-band mangement VLAN (1~4094). |
| 1.3.6.1.4.1.890.1.5.13.13.7.2.4 | ScalaripInbandGateway | read-write | current | Sets the in-band default gateway's IP address (0.0.0.1 ~ 223.255.255.255). |
| 1.3.6.1.4.1.890.1.5.13.13.7.2.5 | Tableipv6InbandTable | not-accessible | current | The table contains ipv6 inband status. |
| 1.3.6.1.4.1.890.1.5.13.13.7.2.5.1 | Rowipv6InbandEntry | not-accessible | current | |
| 1.3.6.1.4.1.890.1.5.13.13.7.2.5.1.1 | Columnipv6InbandIndex | read-only | current | The ip inband index. |
| 1.3.6.1.4.1.890.1.5.13.13.7.2.5.1.2 | Columnipv6InbandAddress | read-write | current | Configures in-band management interface with global IPv6 address (2000:: ~ 3fff:ffff:ffff:ffff:ffff:ffff:ffff:ffff) or IPv6 address with all zeros (::). |
| 1.3.6.1.4.1.890.1.5.13.13.7.2.5.1.3 | Columnipv6InbandNetmask | read-write | current | Configures in-band management interface IPv6 global address subnet mask. |
| 1.3.6.1.4.1.890.1.5.13.13.7.2.7 | Scalaripv6InbandGateway | read-write | current | Configures global IPv6 address (2000:: ~ 3fff:ffff:ffff:ffff:ffff:ffff:ffff:ffff) or IPv6 address with all zeros (::) for the inband IPv6 default outgoing gate… |
| 1.3.6.1.4.1.890.1.5.13.13.7.2.10 | ScalaripInbandMgmtPbit | read-write | current | Sets in-band mangement pbit. |
| 1.3.6.1.4.1.890.1.5.13.13.7.2.11 | Scalaripv6InbandLinkLocalAddress | read-only | current | In-of-band IPv6 Link-local Address |
| 1.3.6.1.4.1.890.1.5.13.13.7.2.15 | ScalaripInbandDhcpClientConfig | read-write | current | Enable DHCP client to MGMT inband interface. disable(0) is only for status display. |
| 1.3.6.1.4.1.890.1.5.13.13.7.2.16 | ScalaripInbandDhcpClientOption | read-write | current | Renew or release DHCP client to MGMT inband interface. |
| 1.3.6.1.4.1.890.1.5.13.13.7.2.17 | Scalaripv6InbandDhcpClientConfig | read-write | current | Enable DHCP client to MGMT inband v6 interface. disable(0) is only for status display. |
| 1.3.6.1.4.1.890.1.5.13.13.7.2.18 | Scalaripv6InbandDhcpClientOption | read-write | current | Renew or release DHCP client to MGMT inband v6 interface. |
| 1.3.6.1.4.1.890.1.5.13.13.7.2.19 | ScalaripInbandDynamicAddress | read-only | current | Gets the in-band management interface IP address (0.0.0.1 ~ 223.255.255.255). |
| 1.3.6.1.4.1.890.1.5.13.13.7.2.20 | ScalaripInbandDynamicGateway | read-only | current | Gets the in-band dynamic gateway's IP address (0.0.0.1 ~ 223.255.255.255). |
| 1.3.6.1.4.1.890.1.5.13.13.7.3 | NodeipOutband | |||
| 1.3.6.1.4.1.890.1.5.13.13.7.3.1 | ScalaripOutbandAddress | read-write | current | Sets the out-of-band management interface IP address (0.0.0.1 ~ 223.255.255.255). |
| 1.3.6.1.4.1.890.1.5.13.13.7.3.2 | ScalaripOutbandNetmask | read-write | current | Sets the out-of-band management interface subnet mask. |
| 1.3.6.1.4.1.890.1.5.13.13.7.3.3 | Tableipv6OutbandTable | not-accessible | current | The table contains ipv6 outband status. |
| 1.3.6.1.4.1.890.1.5.13.13.7.3.3.1 | Rowipv6OutbandEntry | not-accessible | current | |
| 1.3.6.1.4.1.890.1.5.13.13.7.3.3.1.1 | Columnipv6OutbandIndex | read-only | current | The ipv6 outband index. |
| 1.3.6.1.4.1.890.1.5.13.13.7.3.3.1.2 | Columnipv6OutbandAddress | read-write | current | Configures out-of-band management interface with IPv6 global address (2000:: ~ 3fff:ffff:ffff:ffff:ffff:ffff:ffff:ffff) or IPv6 address with all zeros (::). |
| 1.3.6.1.4.1.890.1.5.13.13.7.3.3.1.3 | Columnipv6OutbandNetmask | read-write | current | Configures out-of-band management interface IPv6 global address subnet mask. |
| 1.3.6.1.4.1.890.1.5.13.13.7.3.5 | ScalaripoutbandGateway | read-write | current | Sets the out-band default gateway's IP address (0.0.0.1 ~ 223.255.255.255). |
| 1.3.6.1.4.1.890.1.5.13.13.7.3.6 | ScalaripoutbandDhcpClientConfig | read-write | current | Enable DHCP client to MGMT outband interface. disable(0) is only for status display. |
| 1.3.6.1.4.1.890.1.5.13.13.7.3.7 | ScalaripoutbandDhcpClientOption | read-write | current | Renew or release DHCP client to MGMT outband interface. |
| 1.3.6.1.4.1.890.1.5.13.13.7.3.8 | Scalaripv6outbandDhcpClientConfig | read-write | current | Enable DHCP client to MGMT outband v6 interface. disable(0) is only for status display. |
| 1.3.6.1.4.1.890.1.5.13.13.7.3.9 | Scalaripv6outbandDhcpClientOption | read-write | current | Renew or release DHCP client to MGMT outband v6 interface. |
| 1.3.6.1.4.1.890.1.5.13.13.7.3.10 | Scalaripv6OutbandLinkLocalAddress | read-only | current | Out-of-band IPv6 Link-local Address |
| 1.3.6.1.4.1.890.1.5.13.13.7.3.11 | ScalaripOutbandDynamicAddress | read-only | current | Gets the out-of-band management interface IP address (0.0.0.1 ~ 223.255.255.255). |
| 1.3.6.1.4.1.890.1.5.13.13.7.3.12 | ScalaripoutbandDynamicGateway | read-only | current | Gets the out-band dynamic gateway's IP address (0.0.0.1 ~ 223.255.255.255). |
| 1.3.6.1.4.1.890.1.5.13.13.7.4 | Scalaripv6DefaultMgmt | read-write | current | Sets which traffic flow (in-band or out-of-band) the Switch sends packet originating from itself (such as SNMP traps) or packets with unknown source. |
| 1.3.6.1.4.1.890.1.5.13.13.7.5 | NodeipRoute | |||
| 1.3.6.1.4.1.890.1.5.13.13.7.5.1 | ScalaripMaxNumOfStaticRoutes | read-only | current | The maximum number of static routes supported by the system. |
| 1.3.6.1.4.1.890.1.5.13.13.7.5.2 | TableipStaticRouteTable | not-accessible | current | Configures a static route. |
| 1.3.6.1.4.1.890.1.5.13.13.7.5.2.1 | RowipStaticRouteEntry | not-accessible | current | |
| 1.3.6.1.4.1.890.1.5.13.13.7.5.2.1.1 | ColumnipStaticRouteDest | read-only | current | Destination subnet address 0.0.0.0 ~ 223.255.255.255 |
| 1.3.6.1.4.1.890.1.5.13.13.7.5.2.1.2 | ColumnipStaticRouteMask | read-only | current | Destination subnet mask |
| 1.3.6.1.4.1.890.1.5.13.13.7.5.2.1.3 | ColumnipStaticRouteNextHop | read-create | current | Next hop address 0.0.0.0 ~ 223.255.255.255 |
| 1.3.6.1.4.1.890.1.5.13.13.7.5.2.1.4 | ColumnipStaticRouteRowStatus | read-create | current | |
| 1.3.6.1.4.1.890.1.5.13.13.7.5.2.1.5 | ColumnipStaticRouteIfName | read-only | current | Destination interface name |
| 1.3.6.1.4.1.890.1.5.13.13.7.5.2.1.6 | ColumnipStaticRouteMetric | read-write | current | Destination interface metric |
| 1.3.6.1.4.1.890.1.5.13.13.7.5.3 | TableipRouteTable | not-accessible | current | Display routing table. |
| 1.3.6.1.4.1.890.1.5.13.13.7.5.3.1 | RowipRouteEntry | not-accessible | current | |
| 1.3.6.1.4.1.890.1.5.13.13.7.5.3.1.1 | ColumnipRouteDest | read-only | current | Destination subnet address 0.0.0.0 ~ 223.255.255.255 |
| 1.3.6.1.4.1.890.1.5.13.13.7.5.3.1.2 | ColumnipRouteMask | read-only | current | Destination subnet mask |
| 1.3.6.1.4.1.890.1.5.13.13.7.5.3.1.3 | ColumnipRouteNextHop | read-only | current | Next hop address 0.0.0.0 ~ 223.255.255.255 |
| 1.3.6.1.4.1.890.1.5.13.13.7.5.3.1.4 | ColumnipRouteIfName | read-only | current | Destination interface name |
| 1.3.6.1.4.1.890.1.5.13.13.7.5.3.1.5 | ColumnipRouteMetric | read-only | current | Destination interface metric |
| 1.3.6.1.4.1.890.1.5.13.13.7.5.4 | Tableipv6DefaultRouterInbandTable | not-accessible | current | Show IPv6 inband default-router. |
| 1.3.6.1.4.1.890.1.5.13.13.7.5.4.1 | Rowipv6DefaultRouterInbandEntry | not-accessible | current | |
| 1.3.6.1.4.1.890.1.5.13.13.7.5.4.1.1 | Columnipv6DefaultRouterInbandAddress | read-only | current | Show IPv6 default-router inband Address. |
| 1.3.6.1.4.1.890.1.5.13.13.7.5.4.1.2 | Columnipv6DefaultRouterInbandPreference | read-only | current | Show IPv6 default-router inband Preference |
| 1.3.6.1.4.1.890.1.5.13.13.7.5.4.1.3 | Columnipv6DefaultRouterInbandLifetime | read-only | current | Show IPv6 default-router inband lifetime (Unit: sec) |
| 1.3.6.1.4.1.890.1.5.13.13.7.5.4.1.4 | Columnipv6DefaultRouterInbandExpire | read-only | current | Show IPv6 default-router inband expire |
| 1.3.6.1.4.1.890.1.5.13.13.7.5.4.1.5 | Columnipv6DefaultRouterInbandFlag | read-only | current | Show IPv6 default-router inband flag |
| 1.3.6.1.4.1.890.1.5.13.13.7.5.5 | Tableipv6DefaultRouterOutbandTable | not-accessible | current | Show IPv6 outband default-router. |
| 1.3.6.1.4.1.890.1.5.13.13.7.5.5.1 | Rowipv6DefaultRouterOutbandEntry | not-accessible | current | |
| 1.3.6.1.4.1.890.1.5.13.13.7.5.5.1.1 | Columnipv6DefaultRouterOutbandAddress | read-only | current | Show IPv6 default-router outband Address. |
| 1.3.6.1.4.1.890.1.5.13.13.7.5.5.1.2 | Columnipv6DefaultRouterOutbandPreference | read-only | current | Show IPv6 default-router outband Preference |
| 1.3.6.1.4.1.890.1.5.13.13.7.5.5.1.3 | Columnipv6DefaultRouterOutbandLifetime | read-only | current | Show IPv6 default-router outband lifetime. (Unit: sec) |
| 1.3.6.1.4.1.890.1.5.13.13.7.5.5.1.4 | Columnipv6DefaultRouterOutbandExpire | read-only | current | Show IPv6 default-router outband expire |
| 1.3.6.1.4.1.890.1.5.13.13.7.5.5.1.5 | Columnipv6DefaultRouterOutbandFlag | read-only | current | Show IPv6 default-router outband flag |
| 1.3.6.1.4.1.890.1.5.13.13.7.5.6 | Tableipv6RouteInbandTable | not-accessible | current | Show IPv6 inband route |
| 1.3.6.1.4.1.890.1.5.13.13.7.5.6.1 | Rowipv6RouteInbandEntry | not-accessible | current | |
| 1.3.6.1.4.1.890.1.5.13.13.7.5.6.1.1 | Columnipv6RouteInbandAddress | read-only | current | Show IPv6 inband route Address. |
| 1.3.6.1.4.1.890.1.5.13.13.7.5.6.1.2 | Columnipv6RouteInbandMask | read-only | current | Show IPv6 inband route address mask. |
| 1.3.6.1.4.1.890.1.5.13.13.7.5.6.1.3 | Columnipv6RouteInbandName | read-only | current | Show IPv6 inband route Gateway/Interface Name |
| 1.3.6.1.4.1.890.1.5.13.13.7.5.7 | Tableipv6RouteOutbandTable | not-accessible | current | Show IPv6 outband route |
| 1.3.6.1.4.1.890.1.5.13.13.7.5.7.1 | Rowipv6RouteOutbandEntry | not-accessible | current | |
| 1.3.6.1.4.1.890.1.5.13.13.7.5.7.1.1 | Columnipv6RouteOutbandAddress | read-only | current | Show IPv6 outband route Address. |
| 1.3.6.1.4.1.890.1.5.13.13.7.5.7.1.2 | Columnipv6RouteOutbandMask | read-only | current | Show IPv6 inband route address mask. |
| 1.3.6.1.4.1.890.1.5.13.13.7.5.7.1.3 | Columnipv6RouteOutbandName | read-only | current | Show IPv6 Outband route Gateway/Interface Name |
| 1.3.6.1.4.1.890.1.5.13.13.7.6 | NodeipStatistic | |||
| 1.3.6.1.4.1.890.1.5.13.13.7.6.1 | ScalaripInbandInOctetCount | read-only | current | |
| 1.3.6.1.4.1.890.1.5.13.13.7.6.2 | ScalaripInbandInUnicastCount | read-only | current | |
| 1.3.6.1.4.1.890.1.5.13.13.7.6.3 | ScalaripInbandInMulticastCount | read-only | current | |
| 1.3.6.1.4.1.890.1.5.13.13.7.6.4 | ScalaripInbandInDiscardCount | read-only | current | |
| 1.3.6.1.4.1.890.1.5.13.13.7.6.5 | ScalaripInbandInErrorCount | read-only | current | |
| 1.3.6.1.4.1.890.1.5.13.13.7.6.7 | ScalaripInbandOutOctetCount | read-only | current | |
| 1.3.6.1.4.1.890.1.5.13.13.7.6.8 | ScalaripInbandOutUnicastCount | read-only | current | |
| 1.3.6.1.4.1.890.1.5.13.13.7.6.10 | ScalaripInbandOutDiscardCount | read-only | current | |
| 1.3.6.1.4.1.890.1.5.13.13.7.6.11 | ScalaripInbandOutErrorCount | read-only | current | |
| 1.3.6.1.4.1.890.1.5.13.13.7.6.12 | ScalaripOutbandInOctetCount | read-only | current | |
| 1.3.6.1.4.1.890.1.5.13.13.7.6.13 | ScalaripOutbandInUnicastCount | read-only | current | |
| 1.3.6.1.4.1.890.1.5.13.13.7.6.14 | ScalaripOutbandInMulticastCount | read-only | current | |
| 1.3.6.1.4.1.890.1.5.13.13.7.6.15 | ScalaripOutbandInDiscardCount | read-only | current | |
| 1.3.6.1.4.1.890.1.5.13.13.7.6.16 | ScalaripOutbandInErrorCount | read-only | current | |
| 1.3.6.1.4.1.890.1.5.13.13.7.6.17 | ScalaripOutbandOutOctetCount | read-only | current | |
| 1.3.6.1.4.1.890.1.5.13.13.7.6.18 | ScalaripOutbandOutUnicastCount | read-only | current | |
| 1.3.6.1.4.1.890.1.5.13.13.7.6.19 | ScalaripOutbandOutDiscardCount | read-only | current | |
| 1.3.6.1.4.1.890.1.5.13.13.7.6.20 | ScalaripOutbandOutErrorCount | read-only | current | |
| 1.3.6.1.4.1.890.1.5.13.13.7.9 | Nodeipv6Prefix | |||
| 1.3.6.1.4.1.890.1.5.13.13.7.9.1 | Tableipv6PrefixInbandTable | not-accessible | current | Show IPv6 inband prefix |
| 1.3.6.1.4.1.890.1.5.13.13.7.9.1.1 | Rowipv6PrefixInbandEntry | not-accessible | current | |
| 1.3.6.1.4.1.890.1.5.13.13.7.9.1.1.1 | Columnipv6PrefixInbandPrefix | read-only | current | Show IPv6 inband prefix address. |
| 1.3.6.1.4.1.890.1.5.13.13.7.9.1.1.2 | Columnipv6PrefixInbandPrefixLength | read-only | current | Show IPv6 inband prefix length. |
| 1.3.6.1.4.1.890.1.5.13.13.7.9.2 | Tableipv6PrefixOutbandTable | not-accessible | current | Show IPv6 outband prefix |
| 1.3.6.1.4.1.890.1.5.13.13.7.9.2.1 | Rowipv6PrefixOutbandEntry | not-accessible | current | |
| 1.3.6.1.4.1.890.1.5.13.13.7.9.2.1.1 | Columnipv6PrefixOutbandPrefix | read-only | current | Show IPv6 outband prefix address. |
| 1.3.6.1.4.1.890.1.5.13.13.7.9.2.1.2 | Columnipv6PrefixOutbandPrefixLength | read-only | current | Show IPv6 outband prefix length. |
| 1.3.6.1.4.1.890.1.5.13.13.7.10 | ScalaripDefaultGateway | read-write | current | Set the inband or outband gateway as the default gateway |
| 1.3.6.1.4.1.890.1.5.13.13.7.21 | NodeipL3Routing | |||
| 1.3.6.1.4.1.890.1.5.13.13.7.21.1 | NoderoutingIfaceSetup | |||
| 1.3.6.1.4.1.890.1.5.13.13.7.21.1.5 | ScalarmaxNumOfRouterIp | read-only | current | |
| 1.3.6.1.4.1.890.1.5.13.13.7.21.1.6 | TablerouterIpTable | not-accessible | current | |
| 1.3.6.1.4.1.890.1.5.13.13.7.21.1.6.1 | RowrouterIpEntry | not-accessible | current | An entry in inbandIpTable. |
| 1.3.6.1.4.1.890.1.5.13.13.7.21.1.6.1.1 | ColumnrouterIpEntryVid | read-only | current | |
| 1.3.6.1.4.1.890.1.5.13.13.7.21.1.6.1.2 | ColumnrouterIpEntryIp | read-only | current | |
| 1.3.6.1.4.1.890.1.5.13.13.7.21.1.6.1.3 | ColumnrouterIpEntrySubnetMask | read-only | current | |
| 1.3.6.1.4.1.890.1.5.13.13.7.21.1.6.1.4 | ColumnrouterIpEntryRowStatus | read-create | current | |
| 1.3.6.1.4.1.890.1.5.13.13.7.21.2 | Nodelayer3Setup | |||
| 1.3.6.1.4.1.890.1.5.13.13.7.21.2.1 | ScalarrouterRipDistance | read-write | current | The administrative distance of RIP routes |
| 1.3.6.1.4.1.890.1.5.13.13.7.21.2.2 | ScalarrouterRipUpdateTimer | read-only | current | The update timer of RIP routes |
| 1.3.6.1.4.1.890.1.5.13.13.7.21.2.3 | ScalarrouterRipInvalidTimer | read-only | current | The invalid timer of RIP routes |
| 1.3.6.1.4.1.890.1.5.13.13.7.21.2.4 | ScalarrouterRipFlushTimer | read-only | current | The flush timer of RIP routes |
| 1.3.6.1.4.1.890.1.5.13.13.7.21.2.5 | TableripRoutingTable | not-accessible | current | |
| 1.3.6.1.4.1.890.1.5.13.13.7.21.2.5.1 | RowripRoutingTableEntry | not-accessible | current | An entry in ripRoutingTable. |
| 1.3.6.1.4.1.890.1.5.13.13.7.21.2.5.1.1 | ColumnripRoutingIndex | read-only | current | |
| 1.3.6.1.4.1.890.1.5.13.13.7.21.2.5.1.2 | ColumnripRoutingDest | read-only | current | |
| 1.3.6.1.4.1.890.1.5.13.13.7.21.2.5.1.3 | ColumnripRoutingMask | read-only | current | |
| 1.3.6.1.4.1.890.1.5.13.13.7.21.2.5.1.4 | ColumnripRoutingGateway | read-only | current | |
| 1.3.6.1.4.1.890.1.5.13.13.7.21.2.5.1.5 | ColumnripRoutingMetric | read-only | current | |
| 1.3.6.1.4.1.890.1.5.13.13.7.21.2.5.1.6 | ColumnripRoutingFrom | read-only | current | |
| 1.3.6.1.4.1.890.1.5.13.13.7.21.2.5.1.7 | ColumnripRoutingTime | read-only | current | |
| 1.3.6.1.4.1.890.1.5.13.13.7.21.2.5.1.8 | ColumnripRoutingType | read-only | current | |
| 1.3.6.1.4.1.890.1.5.13.13.7.21.2.6 | NodeospfSettings | |||
| 1.3.6.1.4.1.890.1.5.13.13.7.21.2.6.1 | ScalarospfRouterId | read-write | current | OSPF router id. Range: 0.0.0.1 ~ 255.255.255.255 Set 0.0.0.0 to remove router id setting |
| 1.3.6.1.4.1.890.1.5.13.13.7.21.2.6.2 | ScalarospfDistance | read-write | current | OSPF distance, range: 1 ~ 255 Default: 15 |
| 1.3.6.1.4.1.890.1.5.13.13.7.21.2.6.3 | ScalarospfRedistributeStatic | read-write | current | Enable redistribute static route, need to be set via multiple variable binding with ospfRedistributeStaticMetricType and ospfRedistributeStaticMetric |
| 1.3.6.1.4.1.890.1.5.13.13.7.21.2.6.4 | ScalarospfRedistributeStaticMetricType | read-write | current | Set redistribute static route metric type Default: 1 1(1): External Type 1, add up the cost toward the destination 2(2): External Type 2, with default metric o… |
| 1.3.6.1.4.1.890.1.5.13.13.7.21.2.6.5 | ScalarospfRedistributeStaticMetric | read-write | current | Set redistribute static route metric Default: 15 |
| 1.3.6.1.4.1.890.1.5.13.13.7.21.2.6.6 | ScalarospfRedistributeRip | read-write | current | Enable redistribute RIP, need to be set via multiple variable binding with ospfRedistributeRipMetricType and ospfRedistributeRipMetric |
| 1.3.6.1.4.1.890.1.5.13.13.7.21.2.6.7 | ScalarospfRedistributeRipMetricType | read-write | current | Set redistribute RIP metric type Default: 1 1(1): External Type 1, add up the cost toward the destination 2(2): External Type 2, with default metric of 20 and … |
| 1.3.6.1.4.1.890.1.5.13.13.7.21.2.6.8 | ScalarospfRedistributeRipMetric | read-write | current | Set redistribute RIP metric Default: 15 |
| 1.3.6.1.4.1.890.1.5.13.13.7.21.2.7 | TableospfNetworkTable | not-accessible | current | |
| 1.3.6.1.4.1.890.1.5.13.13.7.21.2.7.1 | RowospfNetworkTableEntry | not-accessible | current | An entry in ospfNetworkTable. |
| 1.3.6.1.4.1.890.1.5.13.13.7.21.2.7.1.1 | ColumnospfNetworkAddress | read-only | current | OSPF network IP address. Range: 0.0.0.1 ~ 223.255.255.255 |
| 1.3.6.1.4.1.890.1.5.13.13.7.21.2.7.1.2 | ColumnospfNetworkMask | read-only | current | OSPF network mask. Range: 1 ~ 32 |
| 1.3.6.1.4.1.890.1.5.13.13.7.21.2.7.1.3 | ColumnospfNetworkAreaId | read-only | current | OSPF network area ID. Range: 0.0.0.0 ~ 255.255.255.255 |
| 1.3.6.1.4.1.890.1.5.13.13.7.21.2.7.1.4 | ColumnospfNetworkRowStatus | read-create | current | Row status of OSPF network. |
| 1.3.6.1.4.1.890.1.5.13.13.7.21.2.8 | TableospfAreaTable | not-accessible | current | |
| 1.3.6.1.4.1.890.1.5.13.13.7.21.2.8.1 | RowospfAreaTableEntry | not-accessible | current | An entry in ospfAreaTable. |
| 1.3.6.1.4.1.890.1.5.13.13.7.21.2.8.1.1 | ColumnospfAreaEntry | read-only | current | OSPF area ID. |
| 1.3.6.1.4.1.890.1.5.13.13.7.21.2.8.1.2 | ColumnospfAreaEntryType | read-write | current | OSPF area type. |
| 1.3.6.1.4.1.890.1.5.13.13.7.21.2.8.1.3 | ColumnospfAreaEntryDefaultCost | read-write | current | OSPF area default cost, can be set only when current area is stub or NSSA area. Default: 15 |
| 1.3.6.1.4.1.890.1.5.13.13.7.21.2.8.1.4 | ColumnospfAreaEntryAuthProtocol | read-write | current | OSPF area authentication type. |
| 1.3.6.1.4.1.890.1.5.13.13.7.21.2.8.1.5 | ColumnospfArearEntryRowStatus | read-create | current | Row status of OSPF area |
| 1.3.6.1.4.1.890.1.5.13.13.7.21.2.9 | TableospfRoutingTable | not-accessible | current | |
| 1.3.6.1.4.1.890.1.5.13.13.7.21.2.9.1 | RowospfRoutingTableEntry | not-accessible | current | An entry in ospfRoutingTable. |
| 1.3.6.1.4.1.890.1.5.13.13.7.21.2.9.1.1 | ColumnospfRoutingIndex | read-only | current | Index of OSPF routing table |
| 1.3.6.1.4.1.890.1.5.13.13.7.21.2.9.1.2 | ColumnospfRoutingRouteType | read-only | current | Route type |
| 1.3.6.1.4.1.890.1.5.13.13.7.21.2.9.1.3 | ColumnospfRoutingAreaType | read-only | current | Routing area type |
| 1.3.6.1.4.1.890.1.5.13.13.7.21.2.9.1.4 | ColumnospfRoutingDest | read-only | current | Prefix/router ID |
| 1.3.6.1.4.1.890.1.5.13.13.7.21.2.9.1.5 | ColumnospfRoutingMask | read-only | current | |
| 1.3.6.1.4.1.890.1.5.13.13.7.21.2.9.1.6 | ColumnospfRoutingGateway | read-only | current | |
| 1.3.6.1.4.1.890.1.5.13.13.7.21.2.9.1.7 | ColumnospfRoutingMetric | read-only | current | |
| 1.3.6.1.4.1.890.1.5.13.13.7.21.2.9.1.8 | ColumnospfRoutingVia | read-only | current | Routing interface where ospfRoutingDest from |
| 1.3.6.1.4.1.890.1.5.13.13.7.21.2.9.1.9 | ColumnospfRoutingRouterType | read-only | current | Neighboring router type |
| 1.3.6.1.4.1.890.1.5.13.13.7.21.3 | NoderouterDomainSetup | |||
| 1.3.6.1.4.1.890.1.5.13.13.7.21.3.1 | TablerouterDomainIpTable | not-accessible | current | |
| 1.3.6.1.4.1.890.1.5.13.13.7.21.3.1.1 | RowrouterDomainIpEntry | not-accessible | current | An entry in routerDomainIpTable. |
| 1.3.6.1.4.1.890.1.5.13.13.7.21.3.1.1.1 | ColumnrouterDomainIpVid | read-only | current | |
| 1.3.6.1.4.1.890.1.5.13.13.7.21.3.1.1.2 | ColumnrouterDomainIpRipDirection | read-write | current | |
| 1.3.6.1.4.1.890.1.5.13.13.7.21.3.1.1.3 | ColumnrouterDomainIpRipVersion | read-write | current | |
| 1.3.6.1.4.1.890.1.5.13.13.7.21.3.1.1.4 | ColumnrouterDomainIpOspfCost | read-write | current | OSPF interface cost. Range: 1 ~ 65535 Default: 15 |
| 1.3.6.1.4.1.890.1.5.13.13.7.21.3.1.1.5 | ColumnrouterDomainIpOspfPriority | read-write | current | OSPF interface priority. Range: 0 ~ 255 Default: 1 |
| 1.3.6.1.4.1.890.1.5.13.13.7.21.3.1.1.6 | ColumnrouterDomainIpOspfRetransmitInterval | read-write | current | OSPF interface retransmit interval. Range: 1 ~ 65535 Default: 5 |
| 1.3.6.1.4.1.890.1.5.13.13.7.21.3.1.1.7 | ColumnrouterDomainIpOspfTransmitDelay | read-write | current | OSPF interface transmit delay. Range: 1 ~ 65535 Default: 1 |
| 1.3.6.1.4.1.890.1.5.13.13.7.21.3.1.1.8 | ColumnrouterDomainIpOspfDeadInterval | read-write | current | OSPF interface dead interval. Range: 1 ~ 65535 Default: 40 |
| 1.3.6.1.4.1.890.1.5.13.13.7.21.3.1.1.9 | ColumnrouterDomainIpOspfHelloInterval | read-write | current | OSPF interface hello interval. Range: 1 ~ 65535 Default: 10 |
| 1.3.6.1.4.1.890.1.5.13.13.7.21.3.1.1.10 | ColumnrouterDomainIpOspfPassive | read-write | current | Set OSPF passive interface |
| 1.3.6.1.4.1.890.1.5.13.13.7.21.3.1.1.11 | ColumnrouterDomainIpOspfAuth | read-write | current | OSPF interface authentication type. |
| 1.3.6.1.4.1.890.1.5.13.13.7.21.3.1.1.12 | ColumnrouterDomainIpOspfAuthSimpleKey | read-write | current | OSPF simple key, 8 printable characters. Simple key can only be set when authentication method is set as 'simple(1)' Set null string to remove simple key setti… |
| 1.3.6.1.4.1.890.1.5.13.13.7.21.3.1.1.13 | ColumnrouterDomainIpOspfMd5KeyId | read-write | current | OSPF interface message-digest key ID. Range: 1 ~ 255 0 indicates key ID is not set. |
| 1.3.6.1.4.1.890.1.5.13.13.7.21.3.1.1.14 | ColumnrouterDomainIpOspfMd5Key | read-write | current | OSPF interface message-digest key, 16 printable characters. MD5 key can only be set when authentication method is set as 'md5(2)', key id and key must can be s… |
| 1.3.6.1.4.1.890.1.5.13.13.8 | Nodelcman | |||
| 1.3.6.1.4.1.890.1.5.13.13.8.1 | TableslotModuleTable | not-accessible | current | The table which contains the slot information in a chassis. |
| 1.3.6.1.4.1.890.1.5.13.13.8.1.1 | RowslotModuleEntry | not-accessible | current | |
| 1.3.6.1.4.1.890.1.5.13.13.8.1.1.1 | ColumnslotModuleId | read-only | current | Identity of the slot. |
| 1.3.6.1.4.1.890.1.5.13.13.8.1.1.2 | ColumnslotModuleCardType | read-only | current | Card type of the plug-in card. |
| 1.3.6.1.4.1.890.1.5.13.13.8.1.1.4 | ColumnslotModuleDescr | read-only | current | The descriptions of the plug-in card. |
| 1.3.6.1.4.1.890.1.5.13.13.8.1.1.5 | ColumnslotModuleStatus | read-only | current | The module state of the plug-in card. |
| 1.3.6.1.4.1.890.1.5.13.13.8.1.1.6 | ColumnslotModuleAlarmStatus | read-only | current | This variable indicates the alarm status of the module and would be aligned with MSC/line-card alarm LED. hasAlarm(1) there is at least one critical current al… |
| 1.3.6.1.4.1.890.1.5.13.13.8.1.1.7 | ColumnslotModuleHWVersion | read-only | current | The hardware version of the plug-in card |
| 1.3.6.1.4.1.890.1.5.13.13.8.1.1.8 | ColumnslotModuleSerialNumber | read-only | current | The serial number of the plug-in card |
| 1.3.6.1.4.1.890.1.5.13.13.8.1.1.10 | ColumnslotModuleUpTime | read-only | current | The time (in seconds) since the plug-in card was last re-initialized. |
| 1.3.6.1.4.1.890.1.5.13.13.8.1.1.11 | ColumnslotModuleAdminState | read-write | current | Enable/disable specified slot |
| 1.3.6.1.4.1.890.1.5.13.13.8.1.1.12 | ColumnslotModuleReset | read-write | current | Write reset(1) to reset the slot. Always return noAction(0). |
| 1.3.6.1.4.1.890.1.5.13.13.8.1.1.13 | ColumnslotModuleReProvision | read-write | current | Write 1 to re-provision the slot. Always return noAction(0). |
| 1.3.6.1.4.1.890.1.5.13.13.8.1.1.14 | ColumnslotModuleDriverInfo | read-only | current | The driver information of the plug-in card, multiple versions are seperated by ',' |
| 1.3.6.1.4.1.890.1.5.13.13.8.1.1.15 | ColumnslotModuleImage1FwVersion | read-only | current | The image-1 version of the plug-in card |
| 1.3.6.1.4.1.890.1.5.13.13.8.1.1.16 | ColumnslotModuleImage2FwVersion | read-only | current | The image-2 version of the plug-in card |
| 1.3.6.1.4.1.890.1.5.13.13.8.1.1.17 | ColumnslotModuleBootupFwVersion | read-only | current | The running firmware version of the plug-in card |
| 1.3.6.1.4.1.890.1.5.13.13.8.1.1.18 | ColumnslotModuleBootupImage | read-write | current | Plug-in card's firmware image index used for system boot up. |
| 1.3.6.1.4.1.890.1.5.13.13.8.1.1.19 | ColumnslotModuleFwUpgradeStatus | read-only | current | Device returns swDownloading(1) - if the downloading process is on going. Device returns swDownloadedSuccessfully(2) - if the downloading process is successful… |
| 1.3.6.1.4.1.890.1.5.13.13.8.1.1.20 | ColumnslotModuleMacAddress | read-only | current | MAC address of plug-in card |
| 1.3.6.1.4.1.890.1.5.13.13.8.1.1.21 | ColumnslotModuleRunningImage | read-only | current | The running firmware image index |
| 1.3.6.1.4.1.890.1.5.13.13.9 | Nodelogin | |||
| 1.3.6.1.4.1.890.1.5.13.13.9.1 | ScalarloginMaxNumOfUsers | read-only | current | The maximum number of login user accounts supported by the system. |
| 1.3.6.1.4.1.890.1.5.13.13.9.2 | TableloginUserTable | not-accessible | current | Login account configuration table. |
| 1.3.6.1.4.1.890.1.5.13.13.9.2.1 | RowloginUserEntry | not-accessible | current | |
| 1.3.6.1.4.1.890.1.5.13.13.9.2.1.1 | ColumnloginUserName | read-only | current | Name of user account. |
| 1.3.6.1.4.1.890.1.5.13.13.9.2.1.2 | ColumnloginUserPassword | read-write | current | Password of user account. |
| 1.3.6.1.4.1.890.1.5.13.13.9.2.1.3 | ColumnloginUserPrivilege | read-write | current | Assigns a privilege level to the specified account. The privilege level is applied the next time the user logs in. |
| 1.3.6.1.4.1.890.1.5.13.13.9.2.1.4 | ColumnloginUserRowStatus | read-create | current | |
| 1.3.6.1.4.1.890.1.5.13.13.10 | Nodeloopguard | |||
| 1.3.6.1.4.1.890.1.5.13.13.10.1 | TableloopguardConfPortTable | not-accessible | current | Loop guard configuration table |
| 1.3.6.1.4.1.890.1.5.13.13.10.1.1 | RowloopguardConfPortEntry | not-accessible | current | |
| 1.3.6.1.4.1.890.1.5.13.13.10.1.1.1 | ColumnloopguardConfPortEnable | read-write | current | Enable/Disable loop guard function for specific port. |
| 1.3.6.1.4.1.890.1.5.13.13.10.1.1.2 | ColumnloopguardConfPortPolicy | read-write | current | Configures the policy when loop condition is detected. fix : shutdown the port, user needs to enable the port manually dynamic : shutdown the port, and recover… |
| 1.3.6.1.4.1.890.1.5.13.13.10.1.1.3 | ColumnloopguardConfPortRecoverTime | read-write | current | Configures the recover time for dynamic policy. |
| 1.3.6.1.4.1.890.1.5.13.13.10.3 | TableloopguardStatsPortTable | not-accessible | current | Loop guard port statistics table |
| 1.3.6.1.4.1.890.1.5.13.13.10.3.1 | RowloopguardStatsPortEntry | not-accessible | current | |
| 1.3.6.1.4.1.890.1.5.13.13.10.3.1.1 | ColumnloopguardStatsPortLinkedState | read-only | current | Displays linked state on specific port. |
| 1.3.6.1.4.1.890.1.5.13.13.10.3.1.2 | ColumnloopguardStatsPortTxPkts | read-only | current | Displays counter of transmited loopguard probe packet on specific port. |
| 1.3.6.1.4.1.890.1.5.13.13.10.3.1.3 | ColumnloopguardStatsPortRxPkts | read-only | current | Displays counter of received loopguard probe packet on specific port. |
| 1.3.6.1.4.1.890.1.5.13.13.10.3.1.4 | ColumnloopguardStatsPortBadPkts | read-only | current | Displays counter of received bad loopguard probe packet on specific port. The bad loopguard probe packet will not trigger loopguard block port mechanism. loopg… |
| 1.3.6.1.4.1.890.1.5.13.13.10.3.1.5 | ColumnloopguardStatsPortShutdownTime | read-only | current | Displays port shutdown time for loopguard detection on specific port. |
| 1.3.6.1.4.1.890.1.5.13.13.10.3.1.6 | ColumnloopguardStatsPortOperation | read-write | current | 1 : Clears loopguard statistics (packet counter) on specific port. |
| 1.3.6.1.4.1.890.1.5.13.13.10.4 | TableloopguardUniVlanTable | not-accessible | current | Loop guard configuration table |
| 1.3.6.1.4.1.890.1.5.13.13.10.4.1 | RowloopguardUniVlanEntry | not-accessible | current | |
| 1.3.6.1.4.1.890.1.5.13.13.10.4.1.1 | ColumnloopguardUniVlanVid | read-only | current | 1 to 4094 is normal vlan id |
| 1.3.6.1.4.1.890.1.5.13.13.10.4.1.2 | ColumnloopguardUniVlanPbit | read-write | current | |
| 1.3.6.1.4.1.890.1.5.13.13.10.4.1.3 | ColumnloopguardUniVlanRowStatus | read-create | current | use 4(create and go) to create new row |
| 1.3.6.1.4.1.890.1.5.13.13.11 | Nodeinterworking | |||
| 1.3.6.1.4.1.890.1.5.13.13.11.1 | Nodeatmvc | |||
| 1.3.6.1.4.1.890.1.5.13.13.11.1.1 | ScalaratmMaxNumOfVcPerPort | read-only | current | The maximum number of VC per port. |
| 1.3.6.1.4.1.890.1.5.13.13.11.1.2 | TableatmvcTable | not-accessible | current | ATM VC configuration table |
| 1.3.6.1.4.1.890.1.5.13.13.11.1.2.1 | RowatmvcEntry | not-accessible | current | |
| 1.3.6.1.4.1.890.1.5.13.13.11.1.2.1.1 | ColumnatmvcVpi | read-only | current | |
| 1.3.6.1.4.1.890.1.5.13.13.11.1.2.1.2 | ColumnatmvcVci | read-only | current | |
| 1.3.6.1.4.1.890.1.5.13.13.11.1.2.1.3 | ColumnatmvcPriority | read-create | current | The QoS priority of the ATM VC. The QoS priority must be unique in the VCs in the same UNI port. |
| 1.3.6.1.4.1.890.1.5.13.13.11.1.2.1.4 | ColumnatmvcEncap | read-create | current | llc: LLC encapsulation vc: VC-MUX encapsulation |
| 1.3.6.1.4.1.890.1.5.13.13.11.1.2.1.7 | ColumnatmvcRowStatus | read-create | current | Row status of the table entry. |
| 1.3.6.1.4.1.890.1.5.13.13.11.2 | NodeportIsolation | |||
| 1.3.6.1.4.1.890.1.5.13.13.11.2.1 | ScalarportIsolationEnable | read-write | current | Enable/Disable isolation between UNI ports |
| 1.3.6.1.4.1.890.1.5.13.13.11.3 | NodevlanGlobal | |||
| 1.3.6.1.4.1.890.1.5.13.13.11.3.1 | ScalarvlanStagTpid | read-write | current | Configures S-tag TPID value |
| 1.3.6.1.4.1.890.1.5.13.13.11.3.3 | ScalarvlanCtagTpid | read-write | current | Configures C-tag TPID value |
| 1.3.6.1.4.1.890.1.5.13.13.11.3.4 | TablevlanPortPvidTable | not-accessible | current | Display the arp table. |
| 1.3.6.1.4.1.890.1.5.13.13.11.3.4.1 | RowvlanPortPvidEntry | not-accessible | current | |
| 1.3.6.1.4.1.890.1.5.13.13.11.3.4.1.1 | ColumnvlanPortPvidValue | read-write | current | port PVID |
| 1.3.6.1.4.1.890.1.5.13.13.11.3.4.1.2 | ColumnvlanPortPbitValue | read-write | current | port pbit |
| 1.3.6.1.4.1.890.1.5.13.13.11.3.5 | TablevlanPortCopyCpbitTable | not-accessible | current | Copy Cpbit to Spbit |
| 1.3.6.1.4.1.890.1.5.13.13.11.3.5.1 | RowvlanPortCopyCpbitEntry | not-accessible | current | |
| 1.3.6.1.4.1.890.1.5.13.13.11.3.5.1.1 | ColumnvlanPortCopyCpbitValue | read-write | current | port copy Cpbit to Spbit |
| 1.3.6.1.4.1.890.1.5.13.13.11.3.6 | ScalarvlanTagMode | read-write | current | Configures vlan tag mode. Packets sent from NNI tagged with S or C tag |
| 1.3.6.1.4.1.890.1.5.13.13.11.3.8 | TablevlanPortFrameTypeTable | not-accessible | current | Configures accepted frame type incoming to this interface. |
| 1.3.6.1.4.1.890.1.5.13.13.11.3.8.1 | RowvlanPortFrameTypeEntry | not-accessible | current | Configures accepted frame type incoming to this interface. |
| 1.3.6.1.4.1.890.1.5.13.13.11.3.8.1.1 | ColumnvlanPortFrameType | read-write | current | Configures accepted frame type incoming to this interface. |
| 1.3.6.1.4.1.890.1.5.13.13.11.6 | NodevlanTrunk | |||
| 1.3.6.1.4.1.890.1.5.13.13.11.6.1 | TablevlanTrunkUntagPortTable | not-accessible | current | Cross-connects untagged packet in the specified UNI PTM ports to the specified S VLAN or S + C VLAN on NNI ports. |
| 1.3.6.1.4.1.890.1.5.13.13.11.6.1.1 | RowvlanTrunkUntagPortEntry | not-accessible | current | |
| 1.3.6.1.4.1.890.1.5.13.13.11.6.1.1.1 | ColumnvlanTrunkUntagPortMode | read-write | current | Configures NNI VLAN tagging mode. sVlan(1) - S tag only sPlusCxVlan(2) - S plus C tag |
| 1.3.6.1.4.1.890.1.5.13.13.11.6.1.1.2 | ColumnvlanTrunkUntagPortNniSvlan | read-write | current | NNI S-tag VLAN ID |
| 1.3.6.1.4.1.890.1.5.13.13.11.6.1.1.3 | ColumnvlanTrunkUntagPortNniSpbit | read-write | current | NNI S-tag pbit |
| 1.3.6.1.4.1.890.1.5.13.13.11.6.1.1.4 | ColumnvlanTrunkUntagPortNniCvlan | read-write | current | NNI C-tag VLAN ID. if vlanTrunkUntagPortMode is sVlan(1), the value will be ignored and always return 0. |
| 1.3.6.1.4.1.890.1.5.13.13.11.6.1.1.5 | ColumnvlanTrunkUntagPortNniCpbit | read-write | current | NNI C-tag pbit. if vlanTrunkUntagPortMode is sVlan(1), the value will be ignored and always return 0. |
| 1.3.6.1.4.1.890.1.5.13.13.11.6.1.1.6 | ColumnvlanTrunkUntagPortRowStatus | read-create | current | Row status of the table entry. |
| 1.3.6.1.4.1.890.1.5.13.13.11.6.2 | TablevlanTrunkUntagEtypePortTable | not-accessible | current | Cross-connects untagged packet from the specified UNI PTM ports to the specified S VLAN or S + C VLAN on NNI ports per Etyer Type field in the packet. |
| 1.3.6.1.4.1.890.1.5.13.13.11.6.2.1 | RowvlanTrunkUntagEtypePortEntry | not-accessible | current | |
| 1.3.6.1.4.1.890.1.5.13.13.11.6.2.1.1 | ColumnvlanTrunkUntagEtypePortEtype | read-only | current | Ether type |
| 1.3.6.1.4.1.890.1.5.13.13.11.6.2.1.2 | ColumnvlanTrunkUntagEtypePortMode | read-write | current | Configures NNI VLAN tagging mode. sVlan(1) - S tag only sPlusCxVlan(2) - S plus C tag |
| 1.3.6.1.4.1.890.1.5.13.13.11.6.2.1.3 | ColumnvlanTrunkUntagEtypePortNniSvlan | read-write | current | NNI S-tag VLAN ID |
| 1.3.6.1.4.1.890.1.5.13.13.11.6.2.1.4 | ColumnvlanTrunkUntagEtypePortNniSpbit | read-write | current | NNI S-tag pbit |
| 1.3.6.1.4.1.890.1.5.13.13.11.6.2.1.5 | ColumnvlanTrunkUntagEtypePortNniCvlan | read-write | current | NNI C-tag VLAN ID. if vlanTrunkUntagEtypePortMode is sVlan(1), the value will be ignored and always return 0. |
| 1.3.6.1.4.1.890.1.5.13.13.11.6.2.1.6 | ColumnvlanTrunkUntagEtypePortNniCpbit | read-write | current | NNI C-tag pbit. if vlanTrunkUntagEtypePortMode is sVlan(1), the value will be ignored and always return 0. |
| 1.3.6.1.4.1.890.1.5.13.13.11.6.2.1.7 | ColumnvlanTrunkUntagEtypePortRowStatus | read-create | current | Row status of the table entry. |
| 1.3.6.1.4.1.890.1.5.13.13.11.6.3 | TablevlanTrunkTagPortTable | not-accessible | current | Cross-connects uni-vid tagged packet in the specified UNI PTM ports to the S(uni-vid) VLAN if S VLAN is not specified or S(svid) + C(uni-vid) on NNI ports if S… |
| 1.3.6.1.4.1.890.1.5.13.13.11.6.3.1 | RowvlanTrunkTagPortEntry | not-accessible | current | |
| 1.3.6.1.4.1.890.1.5.13.13.11.6.3.1.1 | ColumnvlanTrunkTagPortUniNniVlan | read-only | current | UNI VLAN ID. This VLAN is also used as S VLAN ID or C VLAN ID depends on which NNI VLAN tagging mode is configured. |
| 1.3.6.1.4.1.890.1.5.13.13.11.6.3.1.2 | ColumnvlanTrunkTagPortMode | read-write | current | Configures NNI VLAN tagging mode. sVlan(1) - S tag only sPlusCxVlan(2) - S plus C tag |
| 1.3.6.1.4.1.890.1.5.13.13.11.6.3.1.3 | ColumnvlanTrunkTagPortNniSvlan | read-write | current | NNI S VLAN ID. This field is used when vlanTrunkTagPortMode is configured as sPlusCxVlan(2). |
| 1.3.6.1.4.1.890.1.5.13.13.11.6.3.1.4 | ColumnvlanTrunkTagPortRowStatus | read-create | current | Row status of the table entry. |
| 1.3.6.1.4.1.890.1.5.13.13.11.6.4 | TablevlanTrunkUntagSubnetPortTable | not-accessible | current | Cross-connects untagged packet from the specified UNI PTM ports to the specified S VLAN or S + C VLAN on NNI ports for specified IP subnet in the packet. |
| 1.3.6.1.4.1.890.1.5.13.13.11.6.4.1 | RowvlanTrunkUntagSubnetPortEntry | not-accessible | current | |
| 1.3.6.1.4.1.890.1.5.13.13.11.6.4.1.1 | ColumnvlanTrunkUntagSubnetPortIpAddressType | read-only | current | VLAN trunk subnet IP address type |
| 1.3.6.1.4.1.890.1.5.13.13.11.6.4.1.2 | ColumnvlanTrunkUntagSubnetPortIpAddress | read-only | current | VLAN trunk subnet IP address <ipv4-address> 0.0.0.0 ~ 223.255.255.255 <ipv6-address> ::0 ~ ffff:ffff:ffff:ffff:ffff:ffff:ffff:ffff ipv4 address input format: #… |
| 1.3.6.1.4.1.890.1.5.13.13.11.6.4.1.3 | ColumnvlanTrunkUntagSubnetPortIpMask | read-only | current | The netmask of the IP address. |
| 1.3.6.1.4.1.890.1.5.13.13.11.6.4.1.4 | ColumnvlanTrunkUntagSubnetPortMode | read-write | current | Configures NNI VLAN tagging mode. sVlan(1) - S tag only sPlusCxVlan(2) - S plus C tag |
| 1.3.6.1.4.1.890.1.5.13.13.11.6.4.1.5 | ColumnvlanTrunkUntagSubnetPortNniSvlan | read-write | current | NNI S-tag VLAN ID |
| 1.3.6.1.4.1.890.1.5.13.13.11.6.4.1.6 | ColumnvlanTrunkUntagSubnetPortNniSpbit | read-write | current | NNI S-tag pbit |
| 1.3.6.1.4.1.890.1.5.13.13.11.6.4.1.7 | ColumnvlanTrunkUntagSubnetPortNniCvlan | read-write | current | NNI C-tag VLAN ID. if vlanTrunkUntagSubnetPortMode is sVlan(1), the value will be ignored and always return 0. |
| 1.3.6.1.4.1.890.1.5.13.13.11.6.4.1.8 | ColumnvlanTrunkUntagSubnetPortNniCpbit | read-write | current | NNI C-tag pbit. if vlanTrunkUntagSubnetPortMode is sVlan(1), the value will be ignored and always return 0. |
| 1.3.6.1.4.1.890.1.5.13.13.11.6.4.1.9 | ColumnvlanTrunkUntagSubnetPortRowStatus | read-create | current | Row status of the table entry. |
| 1.3.6.1.4.1.890.1.5.13.13.11.6.5 | TablevlanTrunkUntagVcTable | not-accessible | current | Cross-connects untagged packet in the specified UNI ATM virtual circuits to the specified S VLAN or S + C VLAN on NNI ports. |
| 1.3.6.1.4.1.890.1.5.13.13.11.6.5.1 | RowvlanTrunkUntagVcEntry | not-accessible | current | |
| 1.3.6.1.4.1.890.1.5.13.13.11.6.5.1.1 | ColumnvlanTrunkUntagVcMode | read-write | current | Configures NNI VLAN tagging mode. sVlan(1) - S tag only sPlusCxVlan(2) - S plus C tag |
| 1.3.6.1.4.1.890.1.5.13.13.11.6.5.1.2 | ColumnvlanTrunkUntagVcNniSvlan | read-write | current | NNI S-tag VLAN ID |
| 1.3.6.1.4.1.890.1.5.13.13.11.6.5.1.3 | ColumnvlanTrunkUntagVcNniSpbit | read-write | current | NNI S-tag pbit |
| 1.3.6.1.4.1.890.1.5.13.13.11.6.5.1.4 | ColumnvlanTrunkUntagVcNniCvlan | read-write | current | NNI C-tag VLAN ID. if vlanTrunkUntagVcMode is sVlan(1), the value will be ignored and always return 0. |
| 1.3.6.1.4.1.890.1.5.13.13.11.6.5.1.5 | ColumnvlanTrunkUntagVcNniCpbit | read-write | current | NNI C-tag pbit. if vlanTrunkUntagVcMode is sVlan(1), the value will be ignored and always return 0. |
| 1.3.6.1.4.1.890.1.5.13.13.11.6.5.1.6 | ColumnvlanTrunkUntagVcRowStatus | read-create | current | Row status of the table entry. |
| 1.3.6.1.4.1.890.1.5.13.13.11.6.6 | TablevlanTrunkUntagEtypeVcTable | not-accessible | current | Cross-connects untagged packet from the specified UNI ATM virtual circuits to the specified S VLAN or S + C VLAN on NNI ports per Etyer Type field in the packe… |
| 1.3.6.1.4.1.890.1.5.13.13.11.6.6.1 | RowvlanTrunkUntagEtypeVcEntry | not-accessible | current | |
| 1.3.6.1.4.1.890.1.5.13.13.11.6.6.1.1 | ColumnvlanTrunkUntagEtypeVcEtype | read-only | current | Ether type |
| 1.3.6.1.4.1.890.1.5.13.13.11.6.6.1.2 | ColumnvlanTrunkUntagEtypeVcMode | read-write | current | Configures NNI VLAN tagging mode. sVlan(1) - S tag only sPlusCxVlan(2) - S plus C tag |
| 1.3.6.1.4.1.890.1.5.13.13.11.6.6.1.3 | ColumnvlanTrunkUntagEtypeVcNniSvlan | read-write | current | NNI S-tag VLAN ID |
| 1.3.6.1.4.1.890.1.5.13.13.11.6.6.1.4 | ColumnvlanTrunkUntagEtypeVcNniSpbit | read-write | current | NNI S-tag pbit |
| 1.3.6.1.4.1.890.1.5.13.13.11.6.6.1.5 | ColumnvlanTrunkUntagEtypeVcNniCvlan | read-write | current | NNI C-tag VLAN ID. if vlanTrunkUntagEtypeVcMode is sVlan(1), the value will be ignored and always return 0. |
| 1.3.6.1.4.1.890.1.5.13.13.11.6.6.1.6 | ColumnvlanTrunkUntagEtypeVcNniCpbit | read-write | current | NNI C-tag pbit. if vlanTrunkUntagEtypeVcMode is sVlan(1), the value will be ignored and always return 0. |
| 1.3.6.1.4.1.890.1.5.13.13.11.6.6.1.7 | ColumnvlanTrunkUntagEtypeVcRowStatus | read-create | current | Row status of the table entry. |
| 1.3.6.1.4.1.890.1.5.13.13.11.6.7 | TablevlanTrunkTagVcTable | not-accessible | current | Cross-connects uni-vid tagged packet in the specified UNI ATM virtual circuits to the S(uni-vid) VLAN if svlan is not specified or S(svid) + C(uni-vid) on NNI … |
| 1.3.6.1.4.1.890.1.5.13.13.11.6.7.1 | RowvlanTrunkTagVcEntry | not-accessible | current | |
| 1.3.6.1.4.1.890.1.5.13.13.11.6.7.1.1 | ColumnvlanTrunkTagVcUniNniVlan | read-only | current | UNI VLAN ID. This VLAN is also used as S VLAN ID or C VLAN ID depends on which NNI VLAN tagging mode is configured. |
| 1.3.6.1.4.1.890.1.5.13.13.11.6.7.1.2 | ColumnvlanTrunkTagVcMode | read-write | current | Configures NNI VLAN tagging mode. sVlan(1) - S tag only sPlusCxVlan(2) - S plus C tag |
| 1.3.6.1.4.1.890.1.5.13.13.11.6.7.1.3 | ColumnvlanTrunkTagVcNniSvlan | read-write | current | NNI S VLAN ID. This field is used when vlanTrunkTagPortMode is configured as sPlusCxVlan(2). |
| 1.3.6.1.4.1.890.1.5.13.13.11.6.7.1.4 | ColumnvlanTrunkTagVcRowStatus | read-create | current | Row status of the table entry. |
| 1.3.6.1.4.1.890.1.5.13.13.11.6.8 | TablevlanTrunkUntagSubnetVcTable | not-accessible | current | Cross-connects untagged packet from the specified UNI ATM virtual circuits to the specified S VLAN or S + C VLAN on NNI ports for specified IP subnet in the pa… |
| 1.3.6.1.4.1.890.1.5.13.13.11.6.8.1 | RowvlanTrunkUntagSubnetVcEntry | not-accessible | current | |
| 1.3.6.1.4.1.890.1.5.13.13.11.6.8.1.1 | ColumnvlanTrunkUntagSubnetVcIpAddressType | read-only | current | VLAN trunk subnet IP address type |
| 1.3.6.1.4.1.890.1.5.13.13.11.6.8.1.2 | ColumnvlanTrunkUntagSubnetVcIpAddress | read-only | current | VLAN trunk subnet IP address <ipv4-address> 0.0.0.0 ~ 223.255.255.255 <ipv6-address> ::0 ~ ffff:ffff:ffff:ffff:ffff:ffff:ffff:ffff ipv4 address input format: #… |
| 1.3.6.1.4.1.890.1.5.13.13.11.6.8.1.3 | ColumnvlanTrunkUntagSubnetVcIpMask | read-only | current | The netmask of the IP address. |
| 1.3.6.1.4.1.890.1.5.13.13.11.6.8.1.4 | ColumnvlanTrunkUntagSubnetVcMode | read-write | current | Configures NNI VLAN tagging mode. sVlan(1) - S tag only sPlusCxVlan(2) - S plus C tag |
| 1.3.6.1.4.1.890.1.5.13.13.11.6.8.1.5 | ColumnvlanTrunkUntagSubnetVcNniSvlan | read-write | current | NNI S-tag VLAN ID |
| 1.3.6.1.4.1.890.1.5.13.13.11.6.8.1.6 | ColumnvlanTrunkUntagSubnetVcNniSpbit | read-write | current | NNI S-tag pbit |
| 1.3.6.1.4.1.890.1.5.13.13.11.6.8.1.7 | ColumnvlanTrunkUntagSubnetVcNniCvlan | read-write | current | NNI C-tag VLAN ID. if vlanTrunkUntagSubnetVcMode is sVlan(1), the value will be ignored and always return 0. |
| 1.3.6.1.4.1.890.1.5.13.13.11.6.8.1.8 | ColumnvlanTrunkUntagSubnetVcNniCpbit | read-write | current | NNI C-tag pbit. if vlanTrunkUntagSubnetVcMode is sVlan(1), the value will be ignored and always return 0. |
| 1.3.6.1.4.1.890.1.5.13.13.11.6.8.1.9 | ColumnvlanTrunkUntagSubnetVcRowStatus | read-create | current | Row status of the table entry. |
| 1.3.6.1.4.1.890.1.5.13.13.11.7 | NodevlanTranslation | |||
| 1.3.6.1.4.1.890.1.5.13.13.11.7.1 | TablevlanTranslationPortTable | not-accessible | current | Cross-connects uni-vid tagged packet in the specified UNI PTM ports to the S(svid) VLAN or S(svid) + C(cvid) on NNI ports. |
| 1.3.6.1.4.1.890.1.5.13.13.11.7.1.1 | RowvlanTranslationPortEntry | not-accessible | current | |
| 1.3.6.1.4.1.890.1.5.13.13.11.7.1.1.1 | ColumnvlanTranslationPortUniVlan | read-only | current | UNI VLAN ID |
| 1.3.6.1.4.1.890.1.5.13.13.11.7.1.1.2 | ColumnvlanTranslationPortMode | read-write | current | Configures NNI VLAN tagging mode. sVlan(1) - S tag only sPlusCxVlan(2) - S plus C tag |
| 1.3.6.1.4.1.890.1.5.13.13.11.7.1.1.3 | ColumnvlanTranslationPortNniSvlan | read-write | current | NNI S VLAN ID |
| 1.3.6.1.4.1.890.1.5.13.13.11.7.1.1.4 | ColumnvlanTranslationPortNniCvlan | read-write | current | NNI C VLAN ID |
| 1.3.6.1.4.1.890.1.5.13.13.11.7.1.1.5 | ColumnvlanTranslationPortRowStatus | read-create | current | Row status of the table entry. |
| 1.3.6.1.4.1.890.1.5.13.13.11.7.1.1.6 | ColumnvlanTranslationPortNniSPrio | read-write | current | NNI priority 0~7. Specify 8 to not replace the priority. |
| 1.3.6.1.4.1.890.1.5.13.13.11.7.2 | TablevlanTranslationVcTable | not-accessible | current | Cross-connects uni-vid tagged packet in the specified UNI ATM virtual circuits to the S(svid) VLAN or S(svid) + C(cvid) on NNI ports. |
| 1.3.6.1.4.1.890.1.5.13.13.11.7.2.1 | RowvlanTranslationVcEntry | not-accessible | current | |
| 1.3.6.1.4.1.890.1.5.13.13.11.7.2.1.1 | ColumnvlanTranslationVcUniVlan | read-only | current | UNI VLAN ID |
| 1.3.6.1.4.1.890.1.5.13.13.11.7.2.1.2 | ColumnvlanTranslationVcMode | read-write | current | Configures NNI VLAN tagging mode. sVlan(1) - S tag only sPlusCxVlan(2) - S plus C tag |
| 1.3.6.1.4.1.890.1.5.13.13.11.7.2.1.3 | ColumnvlanTranslationVcNniSvlan | read-write | current | NNI S VLAN ID |
| 1.3.6.1.4.1.890.1.5.13.13.11.7.2.1.4 | ColumnvlanTranslationVcNniCvlan | read-write | current | NNI S VLAN ID. if vlanTranslationVcMode is sVlan(1), the value will be ignored and always return 0. |
| 1.3.6.1.4.1.890.1.5.13.13.11.7.2.1.5 | ColumnvlanTranslationVcRowStatus | read-create | current | Row status of the table entry. |
| 1.3.6.1.4.1.890.1.5.13.13.11.7.2.1.6 | ColumnvlanTranslationVcNniSPrio | read-write | current | NNI priority 0~7. Specify 8 to not replace the priority. |
| 1.3.6.1.4.1.890.1.5.13.13.11.8 | NodevlanTls | |||
| 1.3.6.1.4.1.890.1.5.13.13.11.8.1 | TablevlanTlsPortTable | not-accessible | current | Enables Transparent LAN service on the specified UNI PTM ports. The packets are tagged with S tag on NNI ports. |
| 1.3.6.1.4.1.890.1.5.13.13.11.8.1.1 | RowvlanTlsPortEntry | not-accessible | current | |
| 1.3.6.1.4.1.890.1.5.13.13.11.8.1.1.1 | ColumnvlanTlsPortNniSvlan | read-write | current | NNI S VLAN ID |
| 1.3.6.1.4.1.890.1.5.13.13.11.8.1.1.2 | ColumnvlanTlsPortNniSpbit | read-write | current | NNI S PBIT. Used when vlanTlsPortNniForceSpbit is set to enable(1) |
| 1.3.6.1.4.1.890.1.5.13.13.11.8.1.1.3 | ColumnvlanTlsPortNniForceSpbit | read-write | current | Force SPBIT per vlanTlsPortNniSpbit |
| 1.3.6.1.4.1.890.1.5.13.13.11.8.1.1.4 | ColumnvlanTlsPortRowStatus | read-create | current | Row status of the table entry. |
| 1.3.6.1.4.1.890.1.5.13.13.11.8.2 | TablevlanTlsVcTable | not-accessible | current | Enables Transparent LAN service on the specified UNI ATM virtual circuits. The packets is tagged with S tag on NNI ports. |
| 1.3.6.1.4.1.890.1.5.13.13.11.8.2.1 | RowvlanTlsVcEntry | not-accessible | current | |
| 1.3.6.1.4.1.890.1.5.13.13.11.8.2.1.1 | ColumnvlanTlsVcNniSvlan | read-write | current | NNI S VLAN ID |
| 1.3.6.1.4.1.890.1.5.13.13.11.8.2.1.2 | ColumnvlanTlsVcNniSpbit | read-write | current | NNI S PBIT. Used when vlanTlsVcNniForceSpbit is set to enable(1) |
| 1.3.6.1.4.1.890.1.5.13.13.11.8.2.1.3 | ColumnvlanTlsVcNniForceSpbit | read-write | current | Force SPBIT per vlanTlsVcNniSpbit |
| 1.3.6.1.4.1.890.1.5.13.13.11.8.2.1.4 | ColumnvlanTlsVcRowStatus | read-create | current | Row status of the table entry. |
| 1.3.6.1.4.1.890.1.5.13.13.11.9 | Nodefdb | |||
| 1.3.6.1.4.1.890.1.5.13.13.11.9.1 | ScalarfdbAgingTime | read-write | current | Configures FDB aging time from 10 to 3600s. (OLC minimum aging-time is 30s) |
| 1.3.6.1.4.1.890.1.5.13.13.11.9.2 | NodefdbOps | |||
| 1.3.6.1.4.1.890.1.5.13.13.11.9.2.1 | ScalarfdbTarget | read-write | current | Specifies the target ifindex for fdbOperation |
| 1.3.6.1.4.1.890.1.5.13.13.11.9.2.2 | ScalarfdbOperation | read-write | current | Flush FDB flushFDBxAddressTable(1) - flush all entries in FDB table flushFDBAddressTableForSpecifiedPorts(1) - flush entries on specified port in FDB table |
| 1.3.6.1.4.1.890.1.5.13.13.11.9.3 | TablefdbPortConfTable | not-accessible | current | |
| 1.3.6.1.4.1.890.1.5.13.13.11.9.3.1 | RowfdbPortConfEntry | not-accessible | current | |
| 1.3.6.1.4.1.890.1.5.13.13.11.9.3.1.1 | ColumnfdbPortConfMaxNumOfMacEntries | read-write | current | Configures FDB maximum MAC entry counts for speicifed UNI ports |
| 1.3.6.1.4.1.890.1.5.13.13.11.9.5 | TablefdbPortUniVlanConfTable | not-accessible | current | |
| 1.3.6.1.4.1.890.1.5.13.13.11.9.5.1 | RowfdbPortUniVlanConfEntry | not-accessible | current | |
| 1.3.6.1.4.1.890.1.5.13.13.11.9.5.1.1 | ColumnfdbPortVlanConfUniVlan | read-only | current | speicifed UNI VLAN |
| 1.3.6.1.4.1.890.1.5.13.13.11.9.5.1.2 | ColumnfdbPortVlanConfMaxNumOfMacEntries | read-create | current | Configures FDB maximum MAC entry counts for speicifed UNI ports and UNI VLAN |
| 1.3.6.1.4.1.890.1.5.13.13.11.9.5.1.3 | ColumnfdbPortVlanConfRowStatus | read-create | current | Row status of the table entry. |
| 1.3.6.1.4.1.890.1.5.13.13.11.9.6 | TablefdbStaticMacTable | not-accessible | current | Configures static MAC entry on specified UNI ports. |
| 1.3.6.1.4.1.890.1.5.13.13.11.9.6.1 | RowfdbStaticMacEntry | not-accessible | current | |
| 1.3.6.1.4.1.890.1.5.13.13.11.9.6.1.1 | ColumnfdbStaticMacVlanId | read-only | current | vlan id:1 ~ 4094, determined by VLAN model VLAN model | <vlan> Trunk uni-vlan | uni-vid Trunk uni-untag | svlan Trunk etype(S) | svlan Trunk etype(S+C) | cvlan… |
| 1.3.6.1.4.1.890.1.5.13.13.11.9.6.1.2 | ColumnfdbStaticMacPhysAddress | read-only | current | MAC address |
| 1.3.6.1.4.1.890.1.5.13.13.11.9.6.1.3 | ColumnfdbStaticMacRowStatus | read-create | current | Row status of the table entry. |
| 1.3.6.1.4.1.890.1.5.13.13.11.9.7 | TablefdbMacLearningVlanTable | not-accessible | current | MAC learning entry sorted by VLAN ID. |
| 1.3.6.1.4.1.890.1.5.13.13.11.9.7.1 | RowfdbMacLearningVlanEntry | not-accessible | current | |
| 1.3.6.1.4.1.890.1.5.13.13.11.9.7.1.4 | ColumnfdbMacLearningVlanPhysAddress | read-only | current | MAC address |
| 1.3.6.1.4.1.890.1.5.13.13.11.9.7.1.6 | ColumnfdbMacLearningVlanPort | read-only | current | ifIndex the MAC is learnt on |
| 1.3.6.1.4.1.890.1.5.13.13.11.9.7.1.7 | ColumnfdbMacLearningVlanType | read-only | current | MAC learning type |
| 1.3.6.1.4.1.890.1.5.13.13.11.9.7.1.8 | ColumnfdbMacLearningVlanVlanId | read-only | current | S VLAN ID 0 ~ 4094. |
| 1.3.6.1.4.1.890.1.5.13.13.11.9.8 | TablefdbAntiSpoofingTable | not-accessible | current | A table that contains anti MAC spoofing configuration per interface. |
| 1.3.6.1.4.1.890.1.5.13.13.11.9.8.1 | RowfdbAntiSpoofingEntry | not-accessible | current | An entry of fdbAntiSpoofingTable. |
| 1.3.6.1.4.1.890.1.5.13.13.11.9.8.1.1 | ColumnfdbAntiSpoofing | read-write | current | Enable/Disable fdb anti-spoofing. enable: the anti-spoofing mac will be learned on the first port which receives the packet with it as source mac. When anti-sp… |
| 1.3.6.1.4.1.890.1.5.13.13.11.9.8.1.2 | ColumnfdbSpoofingAction | read-write | current | Enable/Disable spoofing action function. enable: disable port when anti-spoofing is detected. disable: do nothing when anti-spoofing is detected. |
| 1.3.6.1.4.1.890.1.5.13.13.11.11 | TableetherMtuTable | not-accessible | current | A table that contains Ethernet Frame Size configuration per interface. |
| 1.3.6.1.4.1.890.1.5.13.13.11.11.1 | RowetherMtuEntry | not-accessible | current | An entry of etherMtuTable. |
| 1.3.6.1.4.1.890.1.5.13.13.11.11.1.1 | ColumnmtuSize | read-write | current | Configures maximum frame size in unit of bytes |
| 1.3.6.1.4.1.890.1.5.13.13.11.12 | Nodesmcast | |||
| 1.3.6.1.4.1.890.1.5.13.13.11.12.1 | TablesmcastMacTable | not-accessible | current | Configures static Multicast MAC on Uni port. |
| 1.3.6.1.4.1.890.1.5.13.13.11.12.1.1 | RowsmcastMacEntry | not-accessible | current | A table entry for static Multicast MAC table. |
| 1.3.6.1.4.1.890.1.5.13.13.11.12.1.1.1 | ColumnsmcastMacAddress | read-create | current | Static multicast group mac address, can be any multicast MAC except the following: 01:80:c2:00:00:00~01:80:c2:00:00:3f, 01:00:5e:00:00:00~01:00:5e:ff:ff:ff. |
| 1.3.6.1.4.1.890.1.5.13.13.11.12.1.1.2 | ColumnsmcastMacVlan | read-create | current | Specifies NNI VLAN ID |
| 1.3.6.1.4.1.890.1.5.13.13.11.12.1.1.3 | ColumnsmcastMacRowStatus | read-create | current | Row status of the table entry. |
| 1.3.6.1.4.1.890.1.5.13.13.11.12.2 | TablesmcastMacNniTable | not-accessible | current | Configures static Multicast MAC for MSC card. |
| 1.3.6.1.4.1.890.1.5.13.13.11.12.2.1 | RowsmcastMacNniEntry | not-accessible | current | A table entry for static Multicast MAC table for MSC card. |
| 1.3.6.1.4.1.890.1.5.13.13.11.12.2.1.1 | ColumnsmcastMacNniAddress | read-create | current | Static multicast group mac address, can be any multicast MAC except the following: 01:80:c2:00:00:00~01:80:c2:00:00:ff, 01:00:5e:00:00:00~01:00:5e:7f:ff:ff. |
| 1.3.6.1.4.1.890.1.5.13.13.11.12.2.1.2 | ColumnsmcastMacNniVlan | read-create | current | Specifies NNI VLAN ID |
| 1.3.6.1.4.1.890.1.5.13.13.11.12.2.1.3 | ColumnsmcastMacNniRowStatus | read-create | current | Row status of the table entry. |
| 1.3.6.1.4.1.890.1.5.13.13.11.12.3 | TablesmcastIpTable | not-accessible | current | Configures static Multicast IP for MSC card. |
| 1.3.6.1.4.1.890.1.5.13.13.11.12.3.1 | RowsmcastIpEntry | not-accessible | current | A table entry for static Multicast IP table for MSC card. |
| 1.3.6.1.4.1.890.1.5.13.13.11.12.3.1.1 | ColumnsmcastIpAddress | read-create | current | Static multicast group IP address. (224.0.0.0 ~ 239.255.255.255) |
| 1.3.6.1.4.1.890.1.5.13.13.11.12.3.1.2 | ColumnsmcastIpVlan | read-create | current | NNI VLAN ID (1~4094) |
| 1.3.6.1.4.1.890.1.5.13.13.11.12.3.1.3 | ColumnsmcastIpRole | read-write | current | forbid: block multicast traffic and IGMP, fix: allow multicast traffic and drop IGMP |
| 1.3.6.1.4.1.890.1.5.13.13.11.12.3.1.4 | ColumnsmcastIpRowStatus | read-create | current | Row status of the table entry. |
| 1.3.6.1.4.1.890.1.5.13.13.11.13 | Nodemirror | |||
| 1.3.6.1.4.1.890.1.5.13.13.11.13.1 | ScalarmirrorEnable | read-write | current | set to 'enable' to enable mirroring |
| 1.3.6.1.4.1.890.1.5.13.13.11.13.2 | ScalarmirrorMonitorPort | read-write | current | monitor port |
| 1.3.6.1.4.1.890.1.5.13.13.11.13.3 | TablemirrorPortTable | not-accessible | current | This table is supported by R5.06 and later versions. |
| 1.3.6.1.4.1.890.1.5.13.13.11.13.3.1 | RowmirrorPortEntry | not-accessible | current | An entry in mirrorPortTable. |
| 1.3.6.1.4.1.890.1.5.13.13.11.13.3.1.1 | ColumnmirrorPortDirection | read-write | current | Set to 'ingress' to mirror ingress traffic, 'egress' to mirror egress traffic, 'both' to mirror bi-directional traffic, 'none' to disable mirroring in this port |
| 1.3.6.1.4.1.890.1.5.13.13.11.13.3.1.2 | ColumnmirrorPortVlan | read-write | current | Specific the vlan which want to monitored. If the vlan value is 9999 denotes monitor all data traffic from specific port. If the vlan value is 0 denotes monito… |
| 1.3.6.1.4.1.890.1.5.13.13.11.14 | NodevlanIsolation | |||
| 1.3.6.1.4.1.890.1.5.13.13.11.14.1 | TablevlanIsolationTable | not-accessible | current | A table contains configuration of isolated VLAN. |
| 1.3.6.1.4.1.890.1.5.13.13.11.14.1.1 | RowvlanIsolationEntry | not-accessible | current | An entry of vlanIsolationTable. |
| 1.3.6.1.4.1.890.1.5.13.13.11.14.1.1.1 | ColumnvlanIsolationRowStatus | read-create | current | Row status of the table used to create/delete an entry. |
| 1.3.6.1.4.1.890.1.5.13.13.12 | Nodepppoe | |||
| 1.3.6.1.4.1.890.1.5.13.13.12.1 | TablepppoeAgentTable | not-accessible | current | A table that contains PPPoE intermediate agent configuration. |
| 1.3.6.1.4.1.890.1.5.13.13.12.1.1 | RowpppoeAgentEntry | not-accessible | current | An entry of pppoeAgentTable. |
| 1.3.6.1.4.1.890.1.5.13.13.12.1.1.1 | ColumnpppoeAgentVlanId | read-only | current | Specify the VLAN ID for the pppoeAgent configuration |
| 1.3.6.1.4.1.890.1.5.13.13.12.1.1.2 | ColumnpppoeAgentMode | read-create | current | pppoeIA(1) - PPPoE intermediate agent function is enabled |
| 1.3.6.1.4.1.890.1.5.13.13.12.1.1.4 | ColumnpppoeAgentCircuitIDInfo | read-create | current | User specific PPPoE circuit ID info. Note: When transform info to circuit ID, the transform result will be truncated to 63 characters Info is composed by the f… |
| 1.3.6.1.4.1.890.1.5.13.13.12.1.1.6 | ColumnpppoeAgentRemoteIDInfo | read-create | current | User specific PPPoE remote ID info. Note: When transform info to remote ID, the transform result will be truncated to 63 characters Info is composed by the fol… |
| 1.3.6.1.4.1.890.1.5.13.13.12.1.1.7 | ColumnpppoeAgentOptPolicyVlan | read-create | current | Select PPPoE option policy in specified VLAN. |
| 1.3.6.1.4.1.890.1.5.13.13.12.1.1.8 | ColumnpppoeAgentRowStatus | read-create | current | Row status of the table entry. |
| 1.3.6.1.4.1.890.1.5.13.13.12.1.1.9 | ColumnpppoeAgentOptLinechar | read-create | current | Select PPPoE option linechar in specified VLAN. |
| 1.3.6.1.4.1.890.1.5.13.13.12.2 | TablepppoeStatisticTable | not-accessible | current | |
| 1.3.6.1.4.1.890.1.5.13.13.12.2.1 | RowpppoeStatisticEntry | not-accessible | current | |
| 1.3.6.1.4.1.890.1.5.13.13.12.2.1.1 | ColumnpppoeStatisticRxPADi | read-only | current | counter for PADi |
| 1.3.6.1.4.1.890.1.5.13.13.12.2.1.2 | ColumnpppoeStatisticRxPADo | read-only | current | counter for PADo |
| 1.3.6.1.4.1.890.1.5.13.13.12.2.1.3 | ColumnpppoeStatisticRxPADr | read-only | current | counter for PADr |
| 1.3.6.1.4.1.890.1.5.13.13.12.2.1.4 | ColumnpppoeStatisticRxPADs | read-only | current | counter for PADs |
| 1.3.6.1.4.1.890.1.5.13.13.12.2.1.5 | ColumnpppoeStatisticRxPADt | read-only | current | counter for PADt |
| 1.3.6.1.4.1.890.1.5.13.13.12.2.1.6 | ColumnpppoeStatisticRxErrSvcName | read-only | current | counter for service name error |
| 1.3.6.1.4.1.890.1.5.13.13.12.2.1.7 | ColumnpppoeStatisticRxErrAcSys | read-only | current | counter for AC system error |
| 1.3.6.1.4.1.890.1.5.13.13.12.2.1.8 | ColumnpppoeStatisticRxErrGeneric | read-only | current | counter for generic error |
| 1.3.6.1.4.1.890.1.5.13.13.12.2.1.9 | ColumnpppoeStatisticTxPADi | read-only | current | counter for PADi |
| 1.3.6.1.4.1.890.1.5.13.13.12.2.1.10 | ColumnpppoeStatisticTxPADo | read-only | current | counter for PADo |
| 1.3.6.1.4.1.890.1.5.13.13.12.2.1.11 | ColumnpppoeStatisticTxPADr | read-only | current | counter for PADr |
| 1.3.6.1.4.1.890.1.5.13.13.12.2.1.12 | ColumnpppoeStatisticTxPADs | read-only | current | counter for PADs |
| 1.3.6.1.4.1.890.1.5.13.13.12.2.1.13 | ColumnpppoeStatisticTxPADt | read-only | current | counter for PADt |
| 1.3.6.1.4.1.890.1.5.13.13.12.2.1.14 | ColumnpppoeStatisticTxErrGeneric | read-only | current | counter for generic error |
| 1.3.6.1.4.1.890.1.5.13.13.12.2.1.15 | ColumnpppoeStatisticOperation | read-write | current | Clears pppoe statistic on specific port. |
| 1.3.6.1.4.1.890.1.5.13.13.12.3 | TablepppoeAgentPortTable | not-accessible | current | A table that contains PPPoE agent configuration for specified linecard ports. |
| 1.3.6.1.4.1.890.1.5.13.13.12.3.1 | RowpppoeAgentPortEntry | not-accessible | current | Configures PPPoE agent for specified linecard ports. |
| 1.3.6.1.4.1.890.1.5.13.13.12.3.1.1 | ColumnpppoeAgentOptPolicyPort | read-write | current | Select PPPoE option policy on specified linecard ports. |
| 1.3.6.1.4.1.890.1.5.13.13.12.4 | ScalarpppoeAgentOptPolicyMode | read-write | current | Select PPPoE option policy mode. |
| 1.3.6.1.4.1.890.1.5.13.13.13 | Nodeqos | |||
| 1.3.6.1.4.1.890.1.5.13.13.13.1 | ScalarqosAtmVcShapingEnable | read-write | current | Enable/Disable per-VC shaping for ATM VC. |
| 1.3.6.1.4.1.890.1.5.13.13.13.2 | ScalarqosMaxNumOfShapingProfiles | read-only | current | The maximum number of shaping profiles supported by the system. |
| 1.3.6.1.4.1.890.1.5.13.13.13.3 | TableqosShapingProfileTable | not-accessible | current | Configures shaping profiles. |
| 1.3.6.1.4.1.890.1.5.13.13.13.3.1 | RowqosShapingProfileEntry | not-accessible | current | |
| 1.3.6.1.4.1.890.1.5.13.13.13.3.1.1 | ColumnqosShapingProfileName | read-only | current | Profile name |
| 1.3.6.1.4.1.890.1.5.13.13.13.3.1.2 | ColumnqosShapingProfileQueue7Rate | read-create | current | The guarenteed minumun bandwidth of queue 7. |
| 1.3.6.1.4.1.890.1.5.13.13.13.3.1.3 | ColumnqosShapingProfileQueue6Rate | read-create | current | The guarenteed minumun bandwidth of queue 6. |
| 1.3.6.1.4.1.890.1.5.13.13.13.3.1.4 | ColumnqosShapingProfileQueue5Rate | read-create | current | The guarenteed minumun bandwidth of queue 5. |
| 1.3.6.1.4.1.890.1.5.13.13.13.3.1.5 | ColumnqosShapingProfileQueue4Rate | read-create | current | The guarenteed minumun bandwidth of queue 4. |
| 1.3.6.1.4.1.890.1.5.13.13.13.3.1.6 | ColumnqosShapingProfileQueue3Rate | read-create | current | The guarenteed minumun bandwidth of queue 3. |
| 1.3.6.1.4.1.890.1.5.13.13.13.3.1.7 | ColumnqosShapingProfileQueue2Rate | read-create | current | The guarenteed minumun bandwidth of queue 2. |
| 1.3.6.1.4.1.890.1.5.13.13.13.3.1.8 | ColumnqosShapingProfileQueue1Rate | read-create | current | The guarenteed minumun bandwidth of queue 1. |
| 1.3.6.1.4.1.890.1.5.13.13.13.3.1.9 | ColumnqosShapingProfileQueue0Rate | read-create | current | The guarenteed minumun bandwidth of queue 0. |
| 1.3.6.1.4.1.890.1.5.13.13.13.3.1.18 | ColumnqosShapingProfileRowStatus | read-create | current | Row status of the table entry. |
| 1.3.6.1.4.1.890.1.5.13.13.13.6 | ScalarqosMaxNumOfVcShapingProfiles | read-only | current | The maximum number of VC shaping profiles supported by the system. |
| 1.3.6.1.4.1.890.1.5.13.13.13.7 | TableqosVcShapingProfileTable | not-accessible | current | Configures ATM shaping profiles. |
| 1.3.6.1.4.1.890.1.5.13.13.13.7.1 | RowqosVcShapingProfileEntry | not-accessible | current | |
| 1.3.6.1.4.1.890.1.5.13.13.13.7.1.1 | ColumnqosVcShapingProfileName | read-only | current | Profile name |
| 1.3.6.1.4.1.890.1.5.13.13.13.7.1.2 | ColumnqosVcShapingProfileMaxRate | read-create | current | The max rate of VC shaping profile. |
| 1.3.6.1.4.1.890.1.5.13.13.13.7.1.3 | ColumnqosVcShapingProfileQueueDepth | read-create | current | The queue depth of VC shaping profile. |
| 1.3.6.1.4.1.890.1.5.13.13.13.7.1.4 | ColumnqosVcShapingProfileRowStatus | read-create | current | Row status of the table entry. |
| 1.3.6.1.4.1.890.1.5.13.13.13.8 | TableqosPortConfTable | not-accessible | current | Configures referenced QoS algorithm and QoS profile to UNI ports |
| 1.3.6.1.4.1.890.1.5.13.13.13.8.1 | RowqosPortConfEntry | not-accessible | current | |
| 1.3.6.1.4.1.890.1.5.13.13.13.8.1.1 | ColumnqosPortConfShapingProfile | read-write | current | Configures shaping profile on specified UNI port. |
| 1.3.6.1.4.1.890.1.5.13.13.13.8.1.3 | ColumnqosPortConfAlgorithm | read-write | current | Configures QoS algorithm on specified UNI port. |
| 1.3.6.1.4.1.890.1.5.13.13.13.8.1.5 | ColumnqosPortConfWeightProfile | read-write | current | Configures wrr/wfq profile on specified UNI port. |
| 1.3.6.1.4.1.890.1.5.13.13.13.8.1.6 | ColumnqosPortConfRateLimitProfile | read-write | current | Configures Rate limit profile on specified UNI port. |
| 1.3.6.1.4.1.890.1.5.13.13.13.8.1.9 | ColumnqosPortConfHybridspq | read-write | current | Configures Hybrid-Spq on specified UNI port. |
| 1.3.6.1.4.1.890.1.5.13.13.13.9 | TableqosVcConfTable | not-accessible | current | |
| 1.3.6.1.4.1.890.1.5.13.13.13.9.1 | RowqosVcConfEntry | not-accessible | current | |
| 1.3.6.1.4.1.890.1.5.13.13.13.9.1.1 | ColumnqosVcConfShapingProfile | read-write | current | Configures ATM shaping profile on specified ATM VC. |
| 1.3.6.1.4.1.890.1.5.13.13.13.10 | NodequeueMapping | |||
| 1.3.6.1.4.1.890.1.5.13.13.13.10.1 | ScalarqueueMappingPbit7QueueId | read-write | current | Configures pbit 7 mapping to specified queue ID. |
| 1.3.6.1.4.1.890.1.5.13.13.13.10.2 | ScalarqueueMappingPbit6QueueId | read-write | current | Configures pbit 6 mapping to specified queue ID. |
| 1.3.6.1.4.1.890.1.5.13.13.13.10.3 | ScalarqueueMappingPbit5QueueId | read-write | current | Configures pbit 5 mapping to specified queue ID. |
| 1.3.6.1.4.1.890.1.5.13.13.13.10.4 | ScalarqueueMappingPbit4QueueId | read-write | current | Configures pbit 4 mapping to specified queue ID. |
| 1.3.6.1.4.1.890.1.5.13.13.13.10.5 | ScalarqueueMappingPbit3QueueId | read-write | current | Configures pbit 3 mapping to specified queue ID. |
| 1.3.6.1.4.1.890.1.5.13.13.13.10.6 | ScalarqueueMappingPbit2QueueId | read-write | current | Configures pbit 2 mapping to specified queue ID. |
| 1.3.6.1.4.1.890.1.5.13.13.13.10.7 | ScalarqueueMappingPbit1QueueId | read-write | current | Configures pbit 1 mapping to specified queue ID. |
| 1.3.6.1.4.1.890.1.5.13.13.13.10.8 | ScalarqueueMappingPbit0QueueId | read-write | current | Configures pbit 0 mapping to specified queue ID. |
| 1.3.6.1.4.1.890.1.5.13.13.13.11 | Nodedscp | |||
| 1.3.6.1.4.1.890.1.5.13.13.13.11.1 | TabledscpMappingTable | not-accessible | current | The table contains DSCP mapping configuration. |
| 1.3.6.1.4.1.890.1.5.13.13.13.11.1.1 | RowdscpMappingEntry | not-accessible | current | An entry of dscpMappingTable. |
| 1.3.6.1.4.1.890.1.5.13.13.13.11.1.1.1 | ColumndscpSrcCodePoint | read-only | current | The DSCP source code point used for mapping. |
| 1.3.6.1.4.1.890.1.5.13.13.13.11.1.1.2 | ColumndscpMapPriority | read-write | current | The mapping p bits that will replace the source p bits in the incoming packet. |
| 1.3.6.1.4.1.890.1.5.13.13.13.11.2 | TabledscpPortTable | not-accessible | current | The table contains DSCP mapping configuration for the xDSL and ethernet ports. |
| 1.3.6.1.4.1.890.1.5.13.13.13.11.2.1 | RowdscpPortEntry | not-accessible | current | An entry of dscpPortTable. |
| 1.3.6.1.4.1.890.1.5.13.13.13.11.2.1.1 | ColumndscpStatusEnable | read-write | current | The DSCP port status. |
| 1.3.6.1.4.1.890.1.5.13.13.13.12 | ScalarqosMaxNumOfWeightProfiles | read-only | current | The maximum number of WRR/WFQ profiles supported by the system. |
| 1.3.6.1.4.1.890.1.5.13.13.13.13 | TableqosWeightProfileTable | not-accessible | current | Configures wrr/wfq profiles. |
| 1.3.6.1.4.1.890.1.5.13.13.13.13.1 | RowqosWeightProfileEntry | not-accessible | current | |
| 1.3.6.1.4.1.890.1.5.13.13.13.13.1.1 | ColumnqosWeightProfileName | read-only | current | Name of WRR/WFG profile. This is a table index. |
| 1.3.6.1.4.1.890.1.5.13.13.13.13.1.2 | ColumnqosWeightProfileQueue7Weight | read-create | current | The weight setting of queue 7, use 0 to specify SP mode. For VLC, 0 is equal to 1 because VLC not support SP+Weight algorithm. |
| 1.3.6.1.4.1.890.1.5.13.13.13.13.1.3 | ColumnqosWeightProfileQueue6Weight | read-create | current | The weight setting of queue 6, use 0 to specify SP mode. For VLC, 0 is equal to 1 because VLC not support SP+Weight algorithm. |
| 1.3.6.1.4.1.890.1.5.13.13.13.13.1.4 | ColumnqosWeightProfileQueue5Weight | read-create | current | The weight setting of queue 5, use 0 to specify SP mode. For VLC, 0 is equal to 1 because VLC not support SP+Weight algorithm. |
| 1.3.6.1.4.1.890.1.5.13.13.13.13.1.5 | ColumnqosWeightProfileQueue4Weight | read-create | current | The weight setting of queue 4, use 0 to specify SP mode. For VLC, 0 is equal to 1 because VLC not support SP+Weight algorithm. |
| 1.3.6.1.4.1.890.1.5.13.13.13.13.1.6 | ColumnqosWeightProfileQueue3Weight | read-create | current | The weight setting of queue 3, use 0 to specify SP mode. For VLC, 0 is equal to 1 because VLC not support SP+Weight algorithm. |
| 1.3.6.1.4.1.890.1.5.13.13.13.13.1.7 | ColumnqosWeightProfileQueue2Weight | read-create | current | The weight setting of queue 2, use 0 to specify SP mode. For VLC, 0 is equal to 1 because VLC not support SP+Weight algorithm. |
| 1.3.6.1.4.1.890.1.5.13.13.13.13.1.8 | ColumnqosWeightProfileQueue1Weight | read-create | current | The weight setting of queue 1, use 0 to specify SP mode. For VLC, 0 is equal to 1 because VLC not support SP+Weight algorithm. |
| 1.3.6.1.4.1.890.1.5.13.13.13.13.1.9 | ColumnqosWeightProfileQueue0Weight | read-create | current | The weight setting of queue 0, use 0 to specify SP mode. For VLC, 0 is equal to 1 because VLC not support SP+Weight algorithm. |
| 1.3.6.1.4.1.890.1.5.13.13.13.13.1.18 | ColumnqosWeightProfileRowStatus | read-create | current | Row status of the table entry. |
| 1.3.6.1.4.1.890.1.5.13.13.13.14 | ScalarqosMaxNumOfRateLimitProfiles | read-only | current | The maximum number of ratelimit profiles supported by the system. |
| 1.3.6.1.4.1.890.1.5.13.13.13.15 | TableqosRatelimitProfileTable | not-accessible | current | Configures rate limit profiles. |
| 1.3.6.1.4.1.890.1.5.13.13.13.15.1 | RowqosRatelimitProfileEntry | not-accessible | current | |
| 1.3.6.1.4.1.890.1.5.13.13.13.15.1.1 | ColumnqosRatelimitProfileName | read-only | current | Name of ratelimit profile. This is a table index. |
| 1.3.6.1.4.1.890.1.5.13.13.13.15.1.2 | ColumnqosRatelimitProfileIngressCIR | read-create | current | Ingress CIR threshold of this rate limit profile. Unit is Kbps(minimum scale is 64 Kbps. If value is not a multiple of 64, a nearly value is applied.) |
| 1.3.6.1.4.1.890.1.5.13.13.13.15.1.3 | ColumnqosRatelimitProfileIngressCBS | read-create | current | Ingress CBS threshold of this rate limit profile. Unit is Kbits(minimum scale is 64 Kbits. If value is not a multiple of 64, a nearly value is applied.) |
| 1.3.6.1.4.1.890.1.5.13.13.13.15.1.4 | ColumnqosRatelimitProfileIngressEIR | read-create | current | Ingress EIR threshold of this rate limit profile. Unit is Kbps(minimum scale is 64 Kbps. If value is not a multiple of 64, a nearly value is applied.) |
| 1.3.6.1.4.1.890.1.5.13.13.13.15.1.5 | ColumnqosRatelimitProfileIngressEBS | read-create | current | Ingress EBS threshold of this rate limit profile. Unit is Kbits(minimum scale is 64 Kbits. If value is not a multiple of 64, a nearly value is applied.) |
| 1.3.6.1.4.1.890.1.5.13.13.13.15.1.7 | ColumnqosRatelimitProfileIngressActive | read-create | current | Enable/disable ingress rate limit. |
| 1.3.6.1.4.1.890.1.5.13.13.13.15.1.8 | ColumnqosRatelimitProfileEgressRate | read-create | current | Egress Rate of this rate limit profile. Unit is Kbps(minimum scale is 64 Kbps. If value is not a multiple of 64, a nearly value is applied.) |
| 1.3.6.1.4.1.890.1.5.13.13.13.15.1.9 | ColumnqosRatelimitProfileEgressBurst | read-create | current | Egress Burst of this rate limit profile. Unit is Kbits(minimum scale is 32 Kbits. If value is not a multiple of 32, a nearly value is applied.) |
| 1.3.6.1.4.1.890.1.5.13.13.13.15.1.10 | ColumnqosRatelimitProfileEgressActive | read-create | current | Enable/disable egress rate limit. |
| 1.3.6.1.4.1.890.1.5.13.13.13.15.1.11 | ColumnqosRatelimitProfileRowStatus | read-create | current | Row status of the table entry. |
| 1.3.6.1.4.1.890.1.5.13.13.14 | Nodeservice | |||
| 1.3.6.1.4.1.890.1.5.13.13.14.1 | TableaccessCtrlTable | not-accessible | current | A table that contains information about service access control. |
| 1.3.6.1.4.1.890.1.5.13.13.14.1.1 | RowaccessCtrlEntry | not-accessible | current | A list of access control entry. |
| 1.3.6.1.4.1.890.1.5.13.13.14.1.1.1 | ColumnaccessCtrlService | read-only | current | The service type of the access control entry. |
| 1.3.6.1.4.1.890.1.5.13.13.14.1.1.2 | ColumnaccessCtrlEnable | read-write | current | Enable/disable the service. |
| 1.3.6.1.4.1.890.1.5.13.13.14.1.1.3 | ColumnaccessCtrlPort | read-write | current | The port number which the service uses. |
| 1.3.6.1.4.1.890.1.5.13.13.14.2 | TablesecuredClientIpTable | not-accessible | current | A table that contains information about IPv4 secured clients. |
| 1.3.6.1.4.1.890.1.5.13.13.14.2.1 | RowsecuredClientIpEntry | not-accessible | current | A list of secured client entry. |
| 1.3.6.1.4.1.890.1.5.13.13.14.2.1.1 | ColumnsecuredClientIpIndex | read-only | current | The index of the entry. |
| 1.3.6.1.4.1.890.1.5.13.13.14.2.1.2 | ColumnsecuredClientIpStartIpAddress | read-write | current | The start IP address (0.0.0.0 ~ 223.255.255.255) of the secured client settings. |
| 1.3.6.1.4.1.890.1.5.13.13.14.2.1.3 | ColumnsecuredClientIpEndIpAddress | read-write | current | The end IP address (0.0.0.0 ~ 223.255.255.255) of the secured client settings. |
| 1.3.6.1.4.1.890.1.5.13.13.14.2.1.4 | ColumnsecuredClientIpService | read-write | current | Each bit corresponds to a service. The bit is settings to 1 if the service is enabled, and settings to 0 if the service is disabled. The various bit positions … |
| 1.3.6.1.4.1.890.1.5.13.13.14.2.1.5 | ColumnsecuredClientIpEnable | read-write | current | Enable/disable the entry. |
| 1.3.6.1.4.1.890.1.5.13.13.14.3 | TablesecuredClientIpv6Table | not-accessible | current | A table that contains information about IPv6 secured clients. |
| 1.3.6.1.4.1.890.1.5.13.13.14.3.1 | RowsecuredClientIpv6Entry | not-accessible | current | A list of IPv6 secured client entry. |
| 1.3.6.1.4.1.890.1.5.13.13.14.3.1.1 | ColumnsecuredClientIpv6Index | read-only | current | The index of the entry. |
| 1.3.6.1.4.1.890.1.5.13.13.14.3.1.2 | ColumnsecuredClientIpv6IpAddress | read-write | current | The IP address (:: ~ ffff:ffff:ffff:ffff:ffff:ffff:ffff:ffff) of the IPv6 secured client settings. |
| 1.3.6.1.4.1.890.1.5.13.13.14.3.1.3 | ColumnsecuredClientIpv6IpMask | read-write | current | The Mask of the IPv6 secured client settings. |
| 1.3.6.1.4.1.890.1.5.13.13.14.3.1.4 | ColumnsecuredClientIpv6Service | read-write | current | Each bit corresponds to a service. The bit is settings to 1 if the service is enabled, and settings to 0 if the service is disabled. The various bit positions … |
| 1.3.6.1.4.1.890.1.5.13.13.14.3.1.5 | ColumnsecuredClientIpv6Enable | read-write | current | Enable/disable the entry. |
| 1.3.6.1.4.1.890.1.5.13.13.15 | Nodesnmp | |||
| 1.3.6.1.4.1.890.1.5.13.13.15.1 | TablesnmpTrapDestTable | not-accessible | current | Sets the IP addresses of up to four SNMP managers (stations to send your SNMP traps to). You can configure up to four managers. |
| 1.3.6.1.4.1.890.1.5.13.13.15.1.1 | RowsnmpTrapDestEntry | not-accessible | current | |
| 1.3.6.1.4.1.890.1.5.13.13.15.1.1.1 | ColumnsnmpTrapDestIndex | read-only | current | index (1..4) of the trap destination table |
| 1.3.6.1.4.1.890.1.5.13.13.15.1.1.2 | ColumnsnmpTrapDestIpAddressType | read-write | current | SNMP trap destination IP address type |
| 1.3.6.1.4.1.890.1.5.13.13.15.1.1.3 | ColumnsnmpTrapDestIpAddress | read-write | current | SNMP trap destination IP address <ipv4-address> 0.0.0.0 ~ 223.255.255.255 <ipv6-address> ::0 ~ ffff:ffff:ffff:ffff:ffff:ffff:ffff:ffff ipv4 address input forma… |
| 1.3.6.1.4.1.890.1.5.13.13.15.1.1.4 | ColumnsnmpTrapDestUdpPort | read-write | current | SNMP manager UDP port. |
| 1.3.6.1.4.1.890.1.5.13.13.15.1.1.5 | ColumnsnmpTrapDestVersion | read-write | current | SNMP version. |
| 1.3.6.1.4.1.890.1.5.13.13.15.1.1.6 | ColumnsnmpTrapDestUserName | read-write | current | Must match an existing account on the Switch. |
| 1.3.6.1.4.1.890.1.5.13.13.15.2 | ScalarsnmpGetCommunity | read-write | current | Sets the get community. Only for SNMPv2c or lower. |
| 1.3.6.1.4.1.890.1.5.13.13.15.3 | ScalarsnmpSetCommunity | read-write | current | Sets the set community. Only for SNMPv2c or lower. |
| 1.3.6.1.4.1.890.1.5.13.13.15.4 | ScalarsnmpTrapCommunity | read-write | current | Sets the trap community. Only for SNMPv2c or lower. |
| 1.3.6.1.4.1.890.1.5.13.13.15.5 | TablesnmpUserTable | not-accessible | current | Sets the authentication level for SNMP v3 user authentication. Optionally, specifies the authentication and encryption methods for communication with the SNMP … |
| 1.3.6.1.4.1.890.1.5.13.13.15.5.1 | RowsnmpUserEntry | not-accessible | current | SNMP user table entry |
| 1.3.6.1.4.1.890.1.5.13.13.15.5.1.1 | ColumnsnmpUserName | read-only | current | User name |
| 1.3.6.1.4.1.890.1.5.13.13.15.5.1.2 | ColumnsnmpUserSecurityLevel | read-write | current | noauth: Use the username as the password string sent to the SNMP manager. This is equivalent to the Get, Set and Trap Community in SNMP v2c. This is the lowest… |
| 1.3.6.1.4.1.890.1.5.13.13.15.5.1.3 | ColumnsnmpUserAuthProtocol | read-write | current | Specify MD5 or SHA authentication algorithm. |
| 1.3.6.1.4.1.890.1.5.13.13.15.5.1.4 | ColumnsnmpUserPrivProtocol | read-write | current | Specify DES or AES encryption algorithm. |
| 1.3.6.1.4.1.890.1.5.13.13.15.6 | ScalarsnmpVersion | read-write | current | Sets the SNMP version to use for communication with the SNMP manager. |
| 1.3.6.1.4.1.890.1.5.13.13.16 | Nodesys | |||
| 1.3.6.1.4.1.890.1.5.13.13.16.1 | ScalarsysBootupFwVersion | read-only | current | Display the version of the running firmware. |
| 1.3.6.1.4.1.890.1.5.13.13.16.2 | ScalarsysImage1FwVersion | read-only | current | Display the firmware version of image1 which was installed at first partition of the flash memory. |
| 1.3.6.1.4.1.890.1.5.13.13.16.3 | ScalarsysImage2FwVersion | read-only | current | Display the firmware version of image2 which was installed at second partition of the flash memory. |
| 1.3.6.1.4.1.890.1.5.13.13.16.4 | ScalarsysBootupImage | read-write | current | Current firmware image which was used for system boot up. |
| 1.3.6.1.4.1.890.1.5.13.13.16.5 | ScalarsysBootupConfig | read-write | current | Current configuration file the system booted up. |
| 1.3.6.1.4.1.890.1.5.13.13.16.6 | NodesysOps | |||
| 1.3.6.1.4.1.890.1.5.13.13.16.6.1 | ScalarsysTarget | read-write | current | Specifies target interface ifIndex for sysOperation. 0 - represent the system, others: same as ifIndex definition 10000: represent slot 1 system 20000: represe… |
| 1.3.6.1.4.1.890.1.5.13.13.16.6.2 | ScalarsysOperation | read-write | current | The agent will reset the object's value to zero when the operation is done. resetByIntf(1) - applicable to ifIndex. saveConfigToBootConfig(2), saveConfigToConf… |
| 1.3.6.1.4.1.890.1.5.13.13.16.6.3 | ScalarsysRebootCountdownTime | read-write | current | system reboot with specified time, the value 0 is set to cancel the operation, unable to set when line card firmware upgrade is not ready |
| 1.3.6.1.4.1.890.1.5.13.13.16.7 | NodesysTimeSetup | |||
| 1.3.6.1.4.1.890.1.5.13.13.16.7.1 | ScalarsysTimeServerMode | read-write | current | The mechanism of Time Server when the system boots up. |
| 1.3.6.1.4.1.890.1.5.13.13.16.7.2 | ScalarsysTimeServerIPType | read-write | current | The IP Address type |
| 1.3.6.1.4.1.890.1.5.13.13.16.7.3 | ScalarsysTimeServerIP | read-write | current | The IP Address of Time Server |
| 1.3.6.1.4.1.890.1.5.13.13.16.7.4 | ScalarsysTimeSystemTime | read-write | current | The system time in hh/mm/ss format hh: 0 ~ 23 mm: 0 ~ 59 ss: 0 ~ 59 |
| 1.3.6.1.4.1.890.1.5.13.13.16.7.5 | ScalarsysTimeSystemDate | read-write | current | The system date in mm/dd/yyyy format mm: 1 ~ 12 dd: 1 ~ 31 yyyy: 1970 ~ 2037 |
| 1.3.6.1.4.1.890.1.5.13.13.16.7.6 | ScalarsysTimeSystemTimeZone | read-write | current | The system time zone |
| 1.3.6.1.4.1.890.1.5.13.13.16.7.7 | ScalarsysTimeServerSynchronize | read-write | current | Synchronize current system time with time server |
| 1.3.6.1.4.1.890.1.5.13.13.16.7.8 | ScalarsysTimeDaylightSaveEnable | read-write | current | Enables/Disables daylight saving on the Switch. |
| 1.3.6.1.4.1.890.1.5.13.13.16.7.9 | ScalarsysTimeDaylightSaveStartDateWeek | read-write | current | Configures daylight saving start-date week. |
| 1.3.6.1.4.1.890.1.5.13.13.16.7.10 | ScalarsysTimeDaylightSaveStartDateDay | read-write | current | Configures daylight saving start-date day. |
| 1.3.6.1.4.1.890.1.5.13.13.16.7.11 | ScalarsysTimeDaylightSaveStartDateMonth | read-write | current | Configures daylight saving start-date month. |
| 1.3.6.1.4.1.890.1.5.13.13.16.7.12 | ScalarsysTimeDaylightSaveStartDateClock | read-write | current | Configures daylight saving start-date o'clock. |
| 1.3.6.1.4.1.890.1.5.13.13.16.7.13 | ScalarsysTimeDaylightSaveEndDateWeek | read-write | current | Configures daylight saving end-date week. |
| 1.3.6.1.4.1.890.1.5.13.13.16.7.14 | ScalarsysTimeDaylightSaveEndDateDay | read-write | current | Configures daylight saving end-date day. |
| 1.3.6.1.4.1.890.1.5.13.13.16.7.15 | ScalarsysTimeDaylightSaveEndDateMonth | read-write | current | Configures daylight saving end-date month. |
| 1.3.6.1.4.1.890.1.5.13.13.16.7.16 | ScalarsysTimeDaylightSaveEndDateClock | read-write | current | Configures daylight saving end-date o'clock. |
| 1.3.6.1.4.1.890.1.5.13.13.16.7.17 | ScalarsysTimeServerLastSynchronizeStatus | read-only | current | The status of the last synchronization with time server |
| 1.3.6.1.4.1.890.1.5.13.13.16.7.18 | ScalarsysTimeServerLastSynchronizeTime | read-only | current | Last time synchronization with time server |
| 1.3.6.1.4.1.890.1.5.13.13.16.10 | NodesysFwUpgrade | |||
| 1.3.6.1.4.1.890.1.5.13.13.16.10.3 | ScalarsysFwUpgradeStatus | read-only | current | Device returns swDownloading(1) - if the downloading process is on going. Device returns swDownloadedSuccessfully(2) - if the downloading process is successful… |
| 1.3.6.1.4.1.890.1.5.13.13.16.12 | NodesysProductData | |||
| 1.3.6.1.4.1.890.1.5.13.13.16.12.1 | ScalarsysProductName | read-only | current | The product name is 'IES5206' by default. |
| 1.3.6.1.4.1.890.1.5.13.13.16.12.2 | ScalarsysProductDescr | read-only | current | The brief description of the product. |
| 1.3.6.1.4.1.890.1.5.13.13.16.12.3 | ScalarsysProductNumber | read-only | current | The product number for IES5206 |
| 1.3.6.1.4.1.890.1.5.13.13.16.12.4 | ScalarsysProductRevision | read-only | current | The product number is for example 'R1A', 'R1B', 'R2A', etc. according to product development and assignment. |
| 1.3.6.1.4.1.890.1.5.13.13.16.12.5 | ScalarsysSerialNumber | read-only | current | The product number assigned during manufacturing process. Serial number is in the format <factory code><7 digit decimal number>, e.g. 'Axx0001234'. |
| 1.3.6.1.4.1.890.1.5.13.13.16.12.6 | ScalarsysManufacturingDate | read-only | current | The product maunfacturing date in format of '<YYYY><MM><DD>, e.g. '20120611'. <YYYY> - 2012~ .... <MM> - 01~12 <DD> - 01~31 |
| 1.3.6.1.4.1.890.1.5.13.13.16.15 | Nodeaaa | |||
| 1.3.6.1.4.1.890.1.5.13.13.16.15.1 | Nodeauthen | |||
| 1.3.6.1.4.1.890.1.5.13.13.16.15.1.1 | ScalarloginMethod1 | read-write | current | The first method of login authentication |
| 1.3.6.1.4.1.890.1.5.13.13.16.15.1.2 | ScalarloginMethod2 | read-write | current | The second method of enable authentication. |
| 1.3.6.1.4.1.890.1.5.13.13.16.15.1.3 | ScalarloginMethod3 | read-write | current | The third method of enable authentication. |
| 1.3.6.1.4.1.890.1.5.13.13.16.15.1.4 | ScalarenableMethod1 | read-write | current | The first method of enable authentication. |
| 1.3.6.1.4.1.890.1.5.13.13.16.15.1.5 | ScalarenableMethod2 | read-write | current | The second method of enable authentication. |
| 1.3.6.1.4.1.890.1.5.13.13.16.15.1.6 | ScalarenableTryContinue | read-write | current | Enable: The system will still try next enable method even the current one method return failed by authentication. Disable: The system will only try next enable… |
| 1.3.6.1.4.1.890.1.5.13.13.16.15.1.7 | ScalarloginTryContinue | read-write | current | Enable: The system will still try next login method even the current one method return failed by authentication. Disable: The system will only try next login m… |
| 1.3.6.1.4.1.890.1.5.13.13.16.15.2 | Nodeacct | |||
| 1.3.6.1.4.1.890.1.5.13.13.16.15.2.1 | ScalarsystemMethod | read-write | current | set the accounting method for system level recording |
| 1.3.6.1.4.1.890.1.5.13.13.16.15.2.2 | ScalarexecMethod | read-write | current | set the accounting method for exec level accounting. |
| 1.3.6.1.4.1.890.1.5.13.13.16.15.2.3 | ScalarexecMode | read-write | current | set the update mode for exec level accounting. start-stop: Send start, stop event to server during administrator log in and log out the shell, and periodically… |
| 1.3.6.1.4.1.890.1.5.13.13.16.15.2.4 | ScalarcommandsPrivilege | read-write | current | set the command privilege level(1~14) for accounting command privilege 0 means disable |
| 1.3.6.1.4.1.890.1.5.13.13.16.15.2.5 | ScalarupdatePeriod | read-write | current | set the update interval of accounting, 1~2147483647 minutes |
| 1.3.6.1.4.1.890.1.5.13.13.16.15.2.6 | ScalarcommandsMethod | read-only | current | show the accounting method for commands level accounting. |
| 1.3.6.1.4.1.890.1.5.13.13.16.15.3 | Nodeauthor | |||
| 1.3.6.1.4.1.890.1.5.13.13.16.15.3.1 | TableauthorPrivModeTable | not-accessible | current | This table is to configure the mode of authorization for each privilege |
| 1.3.6.1.4.1.890.1.5.13.13.16.15.3.1.1 | RowauthorPrivModeEntry | not-accessible | current | An entry of authorPrivModeEntry. |
| 1.3.6.1.4.1.890.1.5.13.13.16.15.3.1.1.1 | ColumnauthorPrivilege | read-write | current | Set the privilege level for authorization, every command will have its assigned privilege, authorization happens when user executes a command which privilege i… |
| 1.3.6.1.4.1.890.1.5.13.13.16.15.3.1.1.2 | ColumnauthorMode | read-write | current | Set the authorization mode when authorization occurred. none: no authorization local: commands will be authorized with default privilege tacacs+: authorization… |
| 1.3.6.1.4.1.890.1.5.13.13.16.15.4 | Noderadius | |||
| 1.3.6.1.4.1.890.1.5.13.13.16.15.4.1 | NoderadiusAuthen | |||
| 1.3.6.1.4.1.890.1.5.13.13.16.15.4.1.1 | ScalarradiusAuthenRedundantMode | read-write | current | Configure the strategy of server selection. index priority: the device tries to contact with the first server, if no response then the device tries to contact … |
| 1.3.6.1.4.1.890.1.5.13.13.16.15.4.1.2 | ScalarradiusAuthenTimeoutPeriod | read-write | current | Set the timeout interval in seconds that the device waits for response from the server. 1~300 seconds When two servers configured and mode is index-priority, t… |
| 1.3.6.1.4.1.890.1.5.13.13.16.15.4.1.3 | TableradiusAuthenServerTable | not-accessible | current | |
| 1.3.6.1.4.1.890.1.5.13.13.16.15.4.1.3.1 | RowradiusAuthenServerEntry | not-accessible | current | An entry of radiusAuthenServerTable. |
| 1.3.6.1.4.1.890.1.5.13.13.16.15.4.1.3.1.1 | ColumnradiusAuthenServerIndex | read-only | current | The index of the server. |
| 1.3.6.1.4.1.890.1.5.13.13.16.15.4.1.3.1.2 | ColumnradiusAuthenServerIP | read-write | current | The IP address of specified radius server. |
| 1.3.6.1.4.1.890.1.5.13.13.16.15.4.1.3.1.3 | ColumnradiusAuthenServerPort | read-write | current | The UDP port of specified radius server |
| 1.3.6.1.4.1.890.1.5.13.13.16.15.4.1.3.1.4 | ColumnradiusAuthenServerSecret | read-write | current | A string key shared with the radius server |
| 1.3.6.1.4.1.890.1.5.13.13.16.15.4.2 | NoderadiusAcct | |||
| 1.3.6.1.4.1.890.1.5.13.13.16.15.4.2.1 | ScalarradiusAcctRedundantMode | read-write | current | Configure the strategy of server selection. index priority: the device tries to contact with the first server, if no response then the device tries to contact … |
| 1.3.6.1.4.1.890.1.5.13.13.16.15.4.2.2 | ScalarradiusAcctTimeoutPeriod | read-write | current | Set the timeout interval in seconds that the device waits for response from the server. 1~300 seconds. When two servers configured and mode is index-priority, … |
| 1.3.6.1.4.1.890.1.5.13.13.16.15.4.2.3 | TableradiusAcctServerTable | not-accessible | current | |
| 1.3.6.1.4.1.890.1.5.13.13.16.15.4.2.3.1 | RowradiusAcctServerEntry | not-accessible | current | An entry of radiusAcctServerTable. |
| 1.3.6.1.4.1.890.1.5.13.13.16.15.4.2.3.1.1 | ColumnradiusAcctServerIndex | read-only | current | The index of the server. |
| 1.3.6.1.4.1.890.1.5.13.13.16.15.4.2.3.1.2 | ColumnradiusAcctServerIP | read-write | current | The IP address of specified radius server. |
| 1.3.6.1.4.1.890.1.5.13.13.16.15.4.2.3.1.3 | ColumnradiusAcctServerPort | read-write | current | The UDP port of specified radius server |
| 1.3.6.1.4.1.890.1.5.13.13.16.15.4.2.3.1.4 | ColumnradiusAcctServerSecret | read-write | current | A string key shared with the radius server |
| 1.3.6.1.4.1.890.1.5.13.13.16.15.5 | Nodetacacsplus | |||
| 1.3.6.1.4.1.890.1.5.13.13.16.15.5.1 | NodetacacsplusAuthen | |||
| 1.3.6.1.4.1.890.1.5.13.13.16.15.5.1.1 | ScalartacacsplusAuthenRedundantMode | read-write | current | Configure the strategy of server selection. index priority: the device tries to contact with the first server, if no response then the device tries to contact … |
| 1.3.6.1.4.1.890.1.5.13.13.16.15.5.1.2 | ScalartacacsplusAuthenTimeoutPeriod | read-write | current | Set the timeout interval in seconds that the device waits for response from the server. 1~300 seconds. When two servers configured and mode is index-priority, … |
| 1.3.6.1.4.1.890.1.5.13.13.16.15.5.1.3 | TabletacacsplusAuthenServerTable | not-accessible | current | |
| 1.3.6.1.4.1.890.1.5.13.13.16.15.5.1.3.1 | RowtacacsplusAuthenServerEntry | not-accessible | current | An entry of tacacsplusAuthServerTable. |
| 1.3.6.1.4.1.890.1.5.13.13.16.15.5.1.3.1.1 | ColumntacscsplusAuthenServerIndex | read-only | current | The index of the server. |
| 1.3.6.1.4.1.890.1.5.13.13.16.15.5.1.3.1.2 | ColumntacscsplusAuthenServerIP | read-write | current | The IP address of specified tacacs+ server. |
| 1.3.6.1.4.1.890.1.5.13.13.16.15.5.1.3.1.3 | ColumntacscsplusAuthenServerPort | read-write | current | The TCP port of specified tacacs+ server |
| 1.3.6.1.4.1.890.1.5.13.13.16.15.5.1.3.1.4 | ColumntacscsplusAuthenServerSecret | read-write | current | A string key shared with the tacacs+ server |
| 1.3.6.1.4.1.890.1.5.13.13.16.15.5.2 | NodetacacsplusAcct | |||
| 1.3.6.1.4.1.890.1.5.13.13.16.15.5.2.1 | ScalartacacsplusAcctRedundantMode | read-write | current | Configure the strategy of server selection. index priority: the device tries to contact with the first server, if no response then the device tries to contact … |
| 1.3.6.1.4.1.890.1.5.13.13.16.15.5.2.2 | ScalartacacsplusAcctTimeoutPeriod | read-write | current | Set the timeout interval in seconds that the device waits for response from the server. 1~300 seconds. When two servers configured and mode is index-priority, … |
| 1.3.6.1.4.1.890.1.5.13.13.16.15.5.2.3 | TabletacacsplusAcctServerTable | not-accessible | current | |
| 1.3.6.1.4.1.890.1.5.13.13.16.15.5.2.3.1 | RowtacacsplusAcctServerEntry | not-accessible | current | An entry of tacacsplusAcctServerTable. |
| 1.3.6.1.4.1.890.1.5.13.13.16.15.5.2.3.1.1 | ColumntacacsplusAcctServerIndex | read-only | current | The index of the server. |
| 1.3.6.1.4.1.890.1.5.13.13.16.15.5.2.3.1.2 | ColumntacacsplusAcctServerIP | read-write | current | The IP address of specified tacacs+ server. |
| 1.3.6.1.4.1.890.1.5.13.13.16.15.5.2.3.1.3 | ColumntacacsplusAcctServerPort | read-write | current | The TCP port of specified tacacs+ server |
| 1.3.6.1.4.1.890.1.5.13.13.16.15.5.2.3.1.4 | ColumntacacsplusAcctServerSecret | read-write | current | A string key shared with the tacacs+ server |
| 1.3.6.1.4.1.890.1.5.13.13.16.15.5.3 | NodetacacsplusAuthor | |||
| 1.3.6.1.4.1.890.1.5.13.13.16.15.5.3.1 | ScalartacacsplusAuthorRedundantMode | read-write | current | Configure the strategy of server selection. index priority: the device tries to contact with the first server, if no response then the device tries to contact … |
| 1.3.6.1.4.1.890.1.5.13.13.16.15.5.3.2 | ScalartacacsplusAuthorTimeoutPeriod | read-write | current | Timeout period (second) of command authorization via TACACS+. 1~300 seconds When two servers configured and mode is index-priority, the actual timeout will be … |
| 1.3.6.1.4.1.890.1.5.13.13.16.15.5.3.3 | TabletacacsplusAuthorServerTable | not-accessible | current | This table is supported by R5.06 and later versions. |
| 1.3.6.1.4.1.890.1.5.13.13.16.15.5.3.3.1 | RowtacacsplusAuthorServerEntry | not-accessible | current | An entry of tacacsplusAuthorServerEntry. This table is supported by R5.06 and later versions. |
| 1.3.6.1.4.1.890.1.5.13.13.16.15.5.3.3.1.1 | ColumntacacsplusAuthorServerIndex | read-only | current | The index of the server. |
| 1.3.6.1.4.1.890.1.5.13.13.16.15.5.3.3.1.2 | ColumntacacsplusAuthorServerIP | read-write | current | TACACS+ server IP for command authorization. |
| 1.3.6.1.4.1.890.1.5.13.13.16.15.5.3.3.1.3 | ColumntacacsplusAuthorServerPort | read-write | current | TACACS+ server port for command authorization. |
| 1.3.6.1.4.1.890.1.5.13.13.16.15.5.3.3.1.4 | ColumntacacsplusAuthorServerSecret | read-write | current | TACACS+ server secret key for command authorization. |
| 1.3.6.1.4.1.890.1.5.13.13.16.16 | NodesystemStatus | |||
| 1.3.6.1.4.1.890.1.5.13.13.16.16.1 | NodechassisStats | |||
| 1.3.6.1.4.1.890.1.5.13.13.16.16.1.1 | TablepowerinfoTable | not-accessible | current | A table that display the status information for power module |
| 1.3.6.1.4.1.890.1.5.13.13.16.16.1.1.1 | RowpowerinfoEntry | not-accessible | current | The entry for powerinfoTable |
| 1.3.6.1.4.1.890.1.5.13.13.16.16.1.1.1.1 | ColumnpowerinfoIndex | not-accessible | current | The index for the power module |
| 1.3.6.1.4.1.890.1.5.13.13.16.16.1.1.1.2 | ColumnpowerinfoMode | read-only | current | Display the AC/DC mode for the power module |
| 1.3.6.1.4.1.890.1.5.13.13.16.16.1.1.1.3 | ColumnpowerinfoStatus | read-only | current | Display the status for the power module. up: the module is exist and voltage is well. down: the module is exist and voltage is fault. not exist: the module is … |
| 1.3.6.1.4.1.890.1.5.13.13.16.16.1.2 | TablefaninfoTable | not-accessible | current | A table that display the status information for fan module |
| 1.3.6.1.4.1.890.1.5.13.13.16.16.1.2.1 | RowfaninfoEntry | not-accessible | current | The entry for faninfoTable |
| 1.3.6.1.4.1.890.1.5.13.13.16.16.1.2.1.1 | ColumnfanModuleStatus | read-only | current | The fan module exist or not |
| 1.3.6.1.4.1.890.1.5.13.13.16.16.1.2.1.2 | ColumnfanAlarmStatus | read-only | current | The alarm status of the fan module |
| 1.3.6.1.4.1.890.1.5.13.13.16.16.1.3 | NodeacPowerCardInfo | |||
| 1.3.6.1.4.1.890.1.5.13.13.16.16.1.3.1 | ScalaracCardPowerSource | read-only | current | The power source that provides power currently. |
| 1.3.6.1.4.1.890.1.5.13.13.16.16.1.3.2 | ScalaracCardSysPowerConsumption | read-only | current | The system power consumption. Unit: mW |
| 1.3.6.1.4.1.890.1.5.13.13.16.16.1.3.3 | ScalaracCardBatChargingPower | read-only | current | The power that is used by charging feature. Unit: mW |
| 1.3.6.1.4.1.890.1.5.13.13.16.16.1.3.4 | ScalaracCardBatStatus | read-only | current | The status of battery. |
| 1.3.6.1.4.1.890.1.5.13.13.16.16.1.3.5 | ScalaracCardBatTemperature | read-only | current | The temperature of battery. Unit: Celsius *Note that this value will always be 0 when battery does not exist. |
| 1.3.6.1.4.1.890.1.5.13.13.16.16.1.3.6 | ScalaracCardBatRemainingPower | read-only | current | The remaining power of battery. Unit: percentage (%) *Note that this value will always be 0 when battery does not exist. |
| 1.3.6.1.4.1.890.1.5.13.13.16.16.1.3.7 | ScalaracCardBatVoltage | read-only | current | The voltage of battery. Unit: mV *Note that this value will always be 0 when battery does not exist. |
| 1.3.6.1.4.1.890.1.5.13.13.16.16.1.3.8 | ScalaracCardBatVoltageCondition | read-only | current | The validation of battery information (status). *Note that this value will always be invalid(0) when battery does not exist. |
| 1.3.6.1.4.1.890.1.5.13.13.16.16.1.3.9 | ScalaracCardBatCapacityValidation | read-only | current | The validation of battery information (capacity). *Note that this value will always be invalid(0) when battery does not exist. |
| 1.3.6.1.4.1.890.1.5.13.13.16.16.1.3.10 | ScalaracCardChargerStatus | read-only | current | The status of charger. |
| 1.3.6.1.4.1.890.1.5.13.13.16.16.1.3.11 | ScalaracCardChargingCurrent | read-only | current | The charging current of charger. Unit: mA *Note that this value will always be 0 when charger is off. |
| 1.3.6.1.4.1.890.1.5.13.13.16.16.1.3.12 | ScalaracCardChargingVoltageTarget | read-only | current | The charging voltage of charger. Unit: mV *Note that this value will always be 0 when charger is off. |
| 1.3.6.1.4.1.890.1.5.13.13.16.16.1.3.13 | ScalaracCardChargingTime | read-only | current | The time period since charger has been enabled. Unit: second *Note that this value will always be 0 when charger is off. |
| 1.3.6.1.4.1.890.1.5.13.13.16.16.1.3.14 | ScalaracCardTrickleCharge | read-only | current | The status of trickle charger. *Note that this value will always be '-' when charger is off. |
| 1.3.6.1.4.1.890.1.5.13.13.16.17 | NodesysMgmtOnlineUser | |||
| 1.3.6.1.4.1.890.1.5.13.13.16.17.1 | TableonlineUserTable | not-accessible | current | |
| 1.3.6.1.4.1.890.1.5.13.13.16.17.1.1 | RowonlineUserEntry | not-accessible | current | An entry in onlineUserTable. |
| 1.3.6.1.4.1.890.1.5.13.13.16.17.1.1.1 | ColumnonlineUserIndex | read-only | current | |
| 1.3.6.1.4.1.890.1.5.13.13.16.17.1.1.2 | ColumnonlineUserSession | read-only | current | user login service |
| 1.3.6.1.4.1.890.1.5.13.13.16.17.1.1.3 | ColumnonlineUserUser | read-only | current | user name |
| 1.3.6.1.4.1.890.1.5.13.13.16.17.1.1.4 | ColumnonlineUserAddrType | read-only | current | addr type |
| 1.3.6.1.4.1.890.1.5.13.13.16.17.1.1.5 | ColumnonlineUserAddr | read-only | current | addr |
| 1.3.6.1.4.1.890.1.5.13.13.16.17.1.1.6 | ColumnonlineUserLoginTime | read-only | current | user login time |
| 1.3.6.1.4.1.890.1.5.13.13.16.18 | ScalarsysStdioDefault | read-write | current | stdio default setting. |
| 1.3.6.1.4.1.890.1.5.13.13.16.19 | NodeacPowerCardSetting | |||
| 1.3.6.1.4.1.890.1.5.13.13.16.19.1 | ScalaracCardBatteryCapacity | read-write | current | Set battery capacity, user has to set this value to enable charger feature. When battery information is invalid, user needs to re-enter the batter capacity to … |
| 1.3.6.1.4.1.890.1.5.13.13.16.19.2 | ScalaracCardBatteryTempThresholdHigh | read-write | current | Battery high temperature threshold. |
| 1.3.6.1.4.1.890.1.5.13.13.16.19.3 | ScalaracCardBatteryTempThresholdLow | read-write | current | Battery low temperature threshold. |
| 1.3.6.1.4.1.890.1.5.13.13.16.20 | ScalarsysReloadConfig | read-write | current | Reload the system with the specified configuration file. This operation may take a while, please set SNMP timeout to 30 or above. And pleasse note that if you … |
| 1.3.6.1.4.1.890.1.5.13.13.17 | Nodevdsl | |||
| 1.3.6.1.4.1.890.1.5.13.13.17.1 | Nodeselt | |||
| 1.3.6.1.4.1.890.1.5.13.13.17.1.1 | ScalarseltTarget | read-write | current | IfIndex of the port which would be performed single end loopback test. |
| 1.3.6.1.4.1.890.1.5.13.13.17.1.2 | ScalarseltOps | read-write | current | The manager sets the object to 1 to start the selt and the agent clears the object to zero when selt is not in progress. |
| 1.3.6.1.4.1.890.1.5.13.13.17.1.3 | ScalarseltStatus | read-only | current | Status description of the selt result. |
| 1.3.6.1.4.1.890.1.5.13.13.17.1.4 | ScalarseltCableType | read-only | current | The cable type that selt result indicates. |
| 1.3.6.1.4.1.890.1.5.13.13.17.1.5 | ScalarseltLoopEstimateLengthFt | read-only | current | The estimated loop length that selt result indicates. |
| 1.3.6.1.4.1.890.1.5.13.13.17.1.6 | ScalarseltLoopEstimateLengthMeter | read-only | current | The estimated loop length that selt result indicates. |
| 1.3.6.1.4.1.890.1.5.13.13.17.2 | NodevdslOps | |||
| 1.3.6.1.4.1.890.1.5.13.13.17.2.1 | ScalarvdslTarget | read-write | current | The target interface specified by ifindex to clear packet statistics. This is allowed for interface 1..48, 101..148 for TIU V48 system. |
| 1.3.6.1.4.1.890.1.5.13.13.17.2.2 | ScalarvdslOperation | read-write | current | Clear packet statistics on the target ifindex specified by vdslTarget. The value will return to '0' when clear operation has done. |
| 1.3.6.1.4.1.890.1.5.13.13.17.4 | Nodevdsl2Profile | |||
| 1.3.6.1.4.1.890.1.5.13.13.17.4.1 | Tablevdsl2LineConfProfileExtendedTable | not-accessible | current | This table contains information on the VDSL2 line profile extension configuration. |
| 1.3.6.1.4.1.890.1.5.13.13.17.4.1.1 | Rowvdsl2LineConfProfileExtendedEntry | not-accessible | current | An entry extends the xdsl2LineConfProfEntry defined in RFC5650. |
| 1.3.6.1.4.1.890.1.5.13.13.17.4.1.1.1 | Columnvdsl2LineConfProfileDpboEPsdID | read-write | current | standard psd shape id for psd toolbox |
| 1.3.6.1.4.1.890.1.5.13.13.17.4.1.1.2 | Columnvdsl2LineConfProfileBitSwapDs | read-write | current | Enable or disable downstream bit swap. |
| 1.3.6.1.4.1.890.1.5.13.13.17.4.1.1.3 | Columnvdsl2LineConfProfileBitSwapUs | read-write | current | Enable or disable upstream bit swap. |
| 1.3.6.1.4.1.890.1.5.13.13.17.4.1.1.4 | Columnvdsl2LineConfProfileVectoring | read-write | current | A table containing the G.Vector information for each profile |
| 1.3.6.1.4.1.890.1.5.13.13.17.4.1.1.5 | Columnvdsl2LineConfProfileRfiMode | read-write | current | Configures Radio Frequency Intereference (RFI) mode. |
| 1.3.6.1.4.1.890.1.5.13.13.17.4.1.1.6 | Columnvdsl2LineConfProfileDpboMode | read-write | current | Configures DPBO mode for different procedure. |
| 1.3.6.1.4.1.890.1.5.13.13.17.4.1.1.7 | Columnvdsl2LineConfProfileDpboEselmin | read-write | current | Configures DPBO E-side cable Electrical Length minimun.tcom mode only. Range from 0 dB (coded as 0) to 255.5 dB (coded as 511) in steps of 0.5 dB. |
| 1.3.6.1.4.1.890.1.5.13.13.17.4.1.1.8 | Columnvdsl2LineConfProfileCompatible | read-write | current | Configures ADSL compatible mode. <mode>: none|adsl2|adsl2+ |
| 1.3.6.1.4.1.890.1.5.13.13.17.4.1.1.9 | Columnvdsl2LineConfProfileAdslCarrierMaskUs | read-write | current | Configures ADSL upstream carrier mask |
| 1.3.6.1.4.1.890.1.5.13.13.17.4.1.1.10 | Columnvdsl2LineConfProfileAdslCarrierMaskDs0 | read-write | current | Configures ADSL downstream carrier mask 0 |
| 1.3.6.1.4.1.890.1.5.13.13.17.4.1.1.11 | Columnvdsl2LineConfProfileAdslCarrierMaskDs1 | read-write | current | Configures ADSL downstream carrier mask 1 |
| 1.3.6.1.4.1.890.1.5.13.13.17.4.1.1.12 | Columnvdsl2LineConfProfilePMMode | read-write | current | Configures Power Management mode. <mode>: disable|allow-l3|allow-l2|allow-both |
| 1.3.6.1.4.1.890.1.5.13.13.17.4.1.1.13 | Columnvdsl2LineConfProfilePMl0Time | read-write | current | Defines the l0-time value. Range from 0 to 65535 sec. |
| 1.3.6.1.4.1.890.1.5.13.13.17.4.1.1.14 | Columnvdsl2LineConfProfilePMl2Time | read-write | current | Defines the l2-time value. Range from 0 to 65535 sec. |
| 1.3.6.1.4.1.890.1.5.13.13.17.4.1.1.15 | Columnvdsl2LineConfProfilePMl2atpr | read-write | current | Defines the l2-atpr value. Range from 0 to 15 dB. |
| 1.3.6.1.4.1.890.1.5.13.13.17.4.1.1.16 | Columnvdsl2LineConfProfilePMl2atprt | read-write | current | Defines the l2-atprt value. Range from 0 to 15 dB. |
| 1.3.6.1.4.1.890.1.5.13.13.17.4.1.1.19 | Columnvdsl2LineConfProfileSosCrcDs | read-write | current | Configuration of downstream SOS CRC trigger condiftion <sos-crc> 0 ~ 65535 in unit of 0.02 normalized CRC |
| 1.3.6.1.4.1.890.1.5.13.13.17.4.1.1.20 | Columnvdsl2LineConfProfileSosCrcUs | read-write | current | Configuration of upstream SOS CRC trigger condiftion <sos-crc> 0 ~ 65535 in unit of 0.02 normalized CRC |
| 1.3.6.1.4.1.890.1.5.13.13.17.4.1.1.21 | Columnvdsl2LineConfProfileSosMaxSuccessDs | read-write | current | Configuration of downstream SOS max number of successful SOS procedures allowed in a 120 seconds interval before a full reinitialization is triggered <sos-max-… |
| 1.3.6.1.4.1.890.1.5.13.13.17.4.1.1.22 | Columnvdsl2LineConfProfileSosMaxSuccessUs | read-write | current | Configuration of upstream SOS max number of successful SOS procedures allowed in a 120 seconds interval before a full reinitialization is triggered <sos-max-su… |
| 1.3.6.1.4.1.890.1.5.13.13.17.4.1.1.23 | Columnvdsl2LineConfProfileSosMonTimeDs | read-write | current | Configuration of downstream SOS monitoring time used to trigger and SOS operation <sos-mon-time> 64 ~ 16320 in ms |
| 1.3.6.1.4.1.890.1.5.13.13.17.4.1.1.24 | Columnvdsl2LineConfProfileSosMonTimeUs | read-write | current | Configuration of upstream SOS monitoring time used to trigger and SOS operation <sos-mon-time> 64 ~ 16320 in ms |
| 1.3.6.1.4.1.890.1.5.13.13.17.4.1.1.25 | Columnvdsl2LineConfProfileSosNToneDs | read-write | current | Configuration of downstream SOS tone degrade condition <sos-ntone> 0 ~ 100 in percent |
| 1.3.6.1.4.1.890.1.5.13.13.17.4.1.1.26 | Columnvdsl2LineConfProfileSosNToneUs | read-write | current | Configuration of upstream SOS tone degrade condition <sos-ntone> 0 ~ 100 in percent |
| 1.3.6.1.4.1.890.1.5.13.13.17.4.1.1.27 | Columnvdsl2LineConfProfileRocEnableDs | read-write | current | Configuration of upstream ROC Enable or disable downstream ROC |
| 1.3.6.1.4.1.890.1.5.13.13.17.4.1.1.28 | Columnvdsl2LineConfProfileRocEnableUs | read-write | current | Configuration of upstream ROC Enable or disable upstream ROC |
| 1.3.6.1.4.1.890.1.5.13.13.17.4.1.1.29 | Columnvdsl2LineConfProfileRocMinInpDs | read-write | current | Configuration of downstream minimum INP to be insured on the ROC channel <roc-min-inp-ds> 0 ~ 16 symbols in 0.5 symbol steps |
| 1.3.6.1.4.1.890.1.5.13.13.17.4.1.1.30 | Columnvdsl2LineConfProfileRocMinInpUs | read-write | current | Configuration of upstream minimum INP to be insured on the ROC channel <roc-min-inp-ds> 0 ~ 16 symbols in 0.5 symbol steps |
| 1.3.6.1.4.1.890.1.5.13.13.17.4.1.1.31 | Columnvdsl2LineConfProfileRocSnrmDs | read-write | current | Configuration of downstream SNRM for the ROC <roc-snrm-ds> 0 ~ 310 in unit of 0.1 dB |
| 1.3.6.1.4.1.890.1.5.13.13.17.4.1.1.32 | Columnvdsl2LineConfProfileRocSnrmUs | read-write | current | Configuration of upstream SNRM for the ROC <roc-snrm-ds> 0 ~ 310 in unit of 0.1 dB |
| 1.3.6.1.4.1.890.1.5.13.13.17.4.1.1.33 | Columnvdsl2LineConfProfileRocDynamicdtg | read-write | current | 00~3f in hex 01: enable SRA US Dynamic D. 02: enable SRA DS Dynamic D. 04: enable SRA US Dynamic T & G when ROC is disabled. 08: enable SRA DS Dynamic T & G wh… |
| 1.3.6.1.4.1.890.1.5.13.13.17.4.1.1.36 | Columnvdsl2LineConfProfileAdsl2CustomPsd | read-write | current | Configuration of ADSL2/2+ custom downstream PSD template. There should be at least one psd value less than or equal to 160 The set of breakpoints can then be r… |
| 1.3.6.1.4.1.890.1.5.13.13.17.4.3 | Tablevdsl2ChanConfProfileExTable | not-accessible | current | This table contains information on the VDSL2 channel profile extension configuration for G.inp. |
| 1.3.6.1.4.1.890.1.5.13.13.17.4.3.1 | Rowvdsl2ChanConfProfileExEntry | not-accessible | current | An entry in vdsl2ChanConfProfileExtendedEntry. |
| 1.3.6.1.4.1.890.1.5.13.13.17.4.3.1.4 | Columnvdsl2ChanConfProfGinpRtxModeDs | read-write | current | G.inp(G.998.4) support setting on downstream direction. The possible values are: Forbidden(0) - Support for G998.4 is disabled. Preferred(1) - If G998.4 is sup… |
| 1.3.6.1.4.1.890.1.5.13.13.17.4.3.1.5 | Columnvdsl2ChanConfProfGinpRtxModeUs | read-write | current | G.inp(G.998.4) support setting on upstream direction. The possible values are: Forbidden(0) - Support for G998.4 is disabled. Preferred(1) - If G998.4 is suppo… |
| 1.3.6.1.4.1.890.1.5.13.13.17.4.3.1.6 | Columnvdsl2ChanConfProfGinpEtrMaxDs | read-write | current | Defines the maximum allowed value for the ETR (Effective Throughput Rate). |
| 1.3.6.1.4.1.890.1.5.13.13.17.4.3.1.7 | Columnvdsl2ChanConfProfGinpEtrMaxUs | read-write | current | Defines the maximum allowed value for the ETR (Effective Throughput Rate). |
| 1.3.6.1.4.1.890.1.5.13.13.17.4.3.1.8 | Columnvdsl2ChanConfProfGinpEtrMinDs | read-write | current | Defines the minimum value for the ETR (Effective Throughput Rate). |
| 1.3.6.1.4.1.890.1.5.13.13.17.4.3.1.9 | Columnvdsl2ChanConfProfGinpEtrMinUs | read-write | current | Defines the minimum value for the ETR (Effective Throughput Rate). |
| 1.3.6.1.4.1.890.1.5.13.13.17.4.3.1.10 | Columnvdsl2ChanConfProfGinpNdrMaxDs | read-write | current | Overrules the wanted downstream maximum data rate provided in the SetLineTrafficConfiguration |
| 1.3.6.1.4.1.890.1.5.13.13.17.4.3.1.11 | Columnvdsl2ChanConfProfGinpNdrMaxUs | read-write | current | Overrules the wanted upstream maximum data rate provided in the SetLineTrafficConfiguration |
| 1.3.6.1.4.1.890.1.5.13.13.17.4.3.1.12 | Columnvdsl2ChanConfProfGinpShineRatioDs | read-write | current | The assumed downstream fraction range from 1 to 255 (in unit of 0.001) of NDR necessary to correct SHINE noise. |
| 1.3.6.1.4.1.890.1.5.13.13.17.4.3.1.13 | Columnvdsl2ChanConfProfGinpShineRatioUs | read-write | current | The assumed upstream fraction range from 1 to 255 (in unit of 0.001) of NDR necessary to correct SHINE noise. |
| 1.3.6.1.4.1.890.1.5.13.13.17.4.3.1.14 | Columnvdsl2ChanConfProfGinpLeftrThresholdDs | read-write | current | The downstream rate threshold (fraction of NDR) below which the Low Error Free Rate (LEFTR) defect is declared. |
| 1.3.6.1.4.1.890.1.5.13.13.17.4.3.1.15 | Columnvdsl2ChanConfProfGinpLeftrThresholdUs | read-write | current | The upstream rate threshold (fraction of NDR) below which the Low Error Free Rate (LEFTR) defect is declared. |
| 1.3.6.1.4.1.890.1.5.13.13.17.4.3.1.16 | Columnvdsl2ChanConfProfGinpMaxDelayDs | read-write | current | G.inp-specific value that overrules the traffic configuration setting in downstream direction. |
| 1.3.6.1.4.1.890.1.5.13.13.17.4.3.1.17 | Columnvdsl2ChanConfProfGinpMaxDelayUs | read-write | current | G.inp-specific value that overrules the traffic configuration setting in upstream direction. |
| 1.3.6.1.4.1.890.1.5.13.13.17.4.3.1.18 | Columnvdsl2ChanConfProfGinpMinDelayDs | read-write | current | G.inp-specific value that overrules minimum-delay-ds in channel profile setting. |
| 1.3.6.1.4.1.890.1.5.13.13.17.4.3.1.19 | Columnvdsl2ChanConfProfGinpMinDelayUs | read-write | current | G.inp-specific value that overrules minimum-delay-us in channel profile setting. |
| 1.3.6.1.4.1.890.1.5.13.13.17.4.3.1.20 | Columnvdsl2ChanConfProfGinpInpMinDs | read-write | current | G.inp-specific value that overrules INPmin-ds in channel profile setting. The possible values are: 0~63 in unit of 1 DMT symbol. Remark: current implementation… |
| 1.3.6.1.4.1.890.1.5.13.13.17.4.3.1.21 | Columnvdsl2ChanConfProfGinpInpMinUs | read-write | current | G.inp-specific value that overrules INPmin-ds in channel profile setting. Unit is symbol. The possible values are: 0~63 in unit of 1 DMT symbol. Remark: curren… |
| 1.3.6.1.4.1.890.1.5.13.13.17.4.3.1.22 | Columnvdsl2ChanConfProfGinpReinCfgInpDs | read-write | current | G.inp-specific value that overrules the traffic configuration setting. Unit is symbol. The possible values are: 0~7 in unit of 1 DMT symbol. |
| 1.3.6.1.4.1.890.1.5.13.13.17.4.3.1.23 | Columnvdsl2ChanConfProfGinpReinCfgInpUs | read-write | current | G.inp-specific value that overrules the traffic configuration setting. Unit is symbol. The possible values are: 0~7 in unit of a DMT symbol. |
| 1.3.6.1.4.1.890.1.5.13.13.17.4.3.1.24 | Columnvdsl2ChanConfProfGinpReinCfgFreqDs | read-write | current | G.inp-specific value that overrules the traffic configuration setting. The possible values is 100 or 120 in unit of Hz. 100 - 100Hz 120 - 120Hz |
| 1.3.6.1.4.1.890.1.5.13.13.17.4.3.1.25 | Columnvdsl2ChanConfProfGinpReinCfgFreqUs | read-write | current | G.inp-specific value that overrules the traffic configuration setting. The possible value is 100 or 120 in unit of Hz. 100 - 100Hz 120 - 120Hz |
| 1.3.6.1.4.1.890.1.5.13.13.17.4.3.1.26 | Columnvdsl2ChanConfProfTpstcAdsl | read-write | current | Configures TPSTC type for ADSL. |
| 1.3.6.1.4.1.890.1.5.13.13.17.4.3.1.28 | Columnvdsl2ChanConfProfSosMinRateDs | read-write | current | Configure downstream SOS minimumrate <min-rate> 32 ~ 100032 in kbps |
| 1.3.6.1.4.1.890.1.5.13.13.17.4.3.1.29 | Columnvdsl2ChanConfProfSosMinRateUs | read-write | current | Configure upstream SOS minimumrate <min-rate> 32 ~ 100032 in kbps |
| 1.3.6.1.4.1.890.1.5.13.13.17.4.4 | Tablevdsl2InmConfProfileTable | not-accessible | current | This table contains information on the VDSL2 Inm profile configuration. |
| 1.3.6.1.4.1.890.1.5.13.13.17.4.4.1 | Rowvdsl2InmConfProfileEntry | not-accessible | current | An entry in Vdsl2InmConfProfileEntry. |
| 1.3.6.1.4.1.890.1.5.13.13.17.4.4.1.1 | Columnvdsl2InmConfProfName | read-only | current | Name of Inm profile. |
| 1.3.6.1.4.1.890.1.5.13.13.17.4.4.1.2 | Columnvdsl2InmConfProfEimNe | read-create | current | Configures near end equivalent INP mode. |
| 1.3.6.1.4.1.890.1.5.13.13.17.4.4.1.3 | Columnvdsl2InmConfProfEimFe | read-create | current | Configures far end equivalent INP mode. |
| 1.3.6.1.4.1.890.1.5.13.13.17.4.4.1.4 | Columnvdsl2InmConfProfCcpNe | read-create | current | Configures near end cluster continuation parameter. |
| 1.3.6.1.4.1.890.1.5.13.13.17.4.4.1.5 | Columnvdsl2InmConfProfCcpFe | read-create | current | Configures far end cluster continuation parameter. |
| 1.3.6.1.4.1.890.1.5.13.13.17.4.4.1.6 | Columnvdsl2InmConfProfIatoNe | read-create | current | Configures near end inter-arrival time offset. |
| 1.3.6.1.4.1.890.1.5.13.13.17.4.4.1.7 | Columnvdsl2InmConfProfIatoFe | read-create | current | Configures far end inter-arrival time offset. |
| 1.3.6.1.4.1.890.1.5.13.13.17.4.4.1.8 | Columnvdsl2InmConfProfIatsNe | read-create | current | Configures near end inter-arrival time step. |
| 1.3.6.1.4.1.890.1.5.13.13.17.4.4.1.9 | Columnvdsl2InmConfProfIatsFe | read-create | current | Configures far end inter-arrival time step. |
| 1.3.6.1.4.1.890.1.5.13.13.17.4.4.1.10 | Columnvdsl2InmConfProfIsdbNe | read-create | current | Configures near end ISDD sensitivity. |
| 1.3.6.1.4.1.890.1.5.13.13.17.4.4.1.12 | Columnvdsl2InmConfProfEifNe | read-create | current | Configures near end equivalent INP format. |
| 1.3.6.1.4.1.890.1.5.13.13.17.4.4.1.13 | Columnvdsl2InmConfProfEifFe | read-create | current | Configures far end equivalent INP format. |
| 1.3.6.1.4.1.890.1.5.13.13.17.4.4.1.14 | Columnvdsl2InmConfProfRowStatus | read-create | current | |
| 1.3.6.1.4.1.890.1.5.13.13.17.4.5 | Tablevdsl2TemplateConfProfileExTable | not-accessible | current | This table contains information on the VDSL2 template profile configuration. |
| 1.3.6.1.4.1.890.1.5.13.13.17.4.5.1 | Rowvdsl2TemplateConfProfileExEntry | not-accessible | current | An entry in vdsl2TemplateConfProfileExEntry. |
| 1.3.6.1.4.1.890.1.5.13.13.17.4.5.1.1 | Columnvdsl2TemplateConfProfileInmProf | read-create | current | Inm profile for template proflie. |
| 1.3.6.1.4.1.890.1.5.13.13.17.5 | Nodevdsl2Stats | |||
| 1.3.6.1.4.1.890.1.5.13.13.17.5.1 | Tablexdsl2LineBandExtTable | not-accessible | current | This table show tx power of band. |
| 1.3.6.1.4.1.890.1.5.13.13.17.5.1.1 | Rowxdsl2LineBandExtEntry | not-accessible | current | An entry extends xdsl2LineBandEntry defined in RFC5650. |
| 1.3.6.1.4.1.890.1.5.13.13.17.5.1.1.1 | Columnxdsl2LineBandTxPower | read-only | current | Xdsl line band transmitted power (in unit of 0.1 dBm, -1280 indicates that power is empty) |
| 1.3.6.1.4.1.890.1.5.13.13.17.5.2 | Tablexdsl2ChannelStatusExTable | not-accessible | current | The table displays VDSL2 channel Status. This table is supported by R5.06 and later versions. |
| 1.3.6.1.4.1.890.1.5.13.13.17.5.2.1 | Rowxdsl2ChannelStatusExEntry | not-accessible | current | An entry of vdslChanExtendedTable. |
| 1.3.6.1.4.1.890.1.5.13.13.17.5.2.1.2 | Columnxdsl2ChannelActualRaMode | read-only | current | The actual RA mode. The possible values are: fixedRateMode(1) - Fixed rate mode raInit(2) - Adaptive rate mode at initialization dynamicRa(3) - Dynamic rate ad… |
| 1.3.6.1.4.1.890.1.5.13.13.17.5.2.1.3 | Columnxdsl2ChannelRtxMode | read-only | current | RTX_USED operational data parameter. The possible values are: rtxInUse(1) - RTX in use. rtxForbidden(2) - RTX not in use because RTX_MODE = FORBIDDEN. rtxNotSu… |
| 1.3.6.1.4.1.890.1.5.13.13.17.5.2.1.4 | Columnxdsl2ChannelRtxOverhead | read-only | current | Expected retransmission overhead in G.inp due to REIN and SHINE noise. Unit is kbps. |
| 1.3.6.1.4.1.890.1.5.13.13.17.5.2.1.5 | Columnxdsl2ChannelGinpFramingType | read-only | current | This parameter is equal to zero if G.inp is not enabled. If G.inp is enabled, it reports the framing type in use (1, 2, 3, or 4). |
| 1.3.6.1.4.1.890.1.5.13.13.17.5.2.1.6 | Columnxdsl2ChannelActualInpAgainstREIN | read-only | current | This parameter reports the actual INP against REIN noise in unit of 0.5 symbol. |
| 1.3.6.1.4.1.890.1.5.13.13.17.5.3 | Tablexdsl2LineUsResultMaskTable | not-accessible | current | The table displays VDSL line actual PSD mask. This table is supported by R5.01 and later versions. |
| 1.3.6.1.4.1.890.1.5.13.13.17.5.3.1 | Rowxdsl2LineUsResultMaskEntry | not-accessible | current | An entry of xdsl2LineUsResultMaskTable. |
| 1.3.6.1.4.1.890.1.5.13.13.17.5.3.1.1 | Columnxdsl2LineUsMaskId | read-only | current | The id of the turning point of the mask, starting from 1. |
| 1.3.6.1.4.1.890.1.5.13.13.17.5.3.1.2 | Columnxdsl2LineUsMaskTone | read-only | current | The tone id. |
| 1.3.6.1.4.1.890.1.5.13.13.17.5.3.1.3 | Columnxdsl2LineUsMaskPsd | read-only | current | The psd, in 0.1 dBm/Hz. |
| 1.3.6.1.4.1.890.1.5.13.13.17.5.4 | Tablexdsl2LineDsResultMaskTable | not-accessible | current | The table displays VDSL line actual PSD mask. This table is supported by R5.01 and later versions. |
| 1.3.6.1.4.1.890.1.5.13.13.17.5.4.1 | Rowxdsl2LineDsResultMaskEntry | not-accessible | current | An entry of xdsl2LineDsResultMaskTable. |
| 1.3.6.1.4.1.890.1.5.13.13.17.5.4.1.1 | Columnxdsl2LineDsMaskId | read-only | current | The id of the turning point of the mask, starting from 1. |
| 1.3.6.1.4.1.890.1.5.13.13.17.5.4.1.2 | Columnxdsl2LineDsMaskTone | read-only | current | The tone id. |
| 1.3.6.1.4.1.890.1.5.13.13.17.5.4.1.3 | Columnxdsl2LineDsMaskPsd | read-only | current | The psd, in 0.1 dBm/Hz. |
| 1.3.6.1.4.1.890.1.5.13.13.17.6 | Nodexdsl2ExtPM | |||
| 1.3.6.1.4.1.890.1.5.13.13.17.6.1 | Tablexdsl2ExtPMLineTable | not-accessible | current | The table xdsl2ExtPMLineTable is a an extension of xdsl2PMLineCurrTable, which contains current Performance Monitoring results for DSL lines since system resta… |
| 1.3.6.1.4.1.890.1.5.13.13.17.6.1.1 | Rowxdsl2ExtPMLineEntry | not-accessible | current | an entry extends the xdsl2PMLinecurrEntry defined in RFC5650. One index of this table is an interface index where the interface has an ifType of vdsl2(251). A … |
| 1.3.6.1.4.1.890.1.5.13.13.17.6.1.1.1 | Columnxdsl2ExtPMLineFecs | read-only | current | Count of seconds since system restarted that there was at least one FEC correction event for one or more bearer channels in this line. This parameter is inhibi… |
| 1.3.6.1.4.1.890.1.5.13.13.17.6.1.1.2 | Columnxdsl2ExtPMLineEs | read-only | current | Count of seconds since system restarted that there was: xTU-C: CRC-8 >= 1 for one or more bearer channels OR LOS >= 1 OR SEF >=1 OR LPR >= 1. xTU-R: FEBE >= 1 … |
| 1.3.6.1.4.1.890.1.5.13.13.17.6.1.1.3 | Columnxdsl2ExtPMLineSes | read-only | current | Count of seconds since system restarts that there was: xTU-C: (CRC-8 anomalies in one or more of the received bearer channels) >= 18 OR LOS >= 1 OR SEF >= 1 OR… |
| 1.3.6.1.4.1.890.1.5.13.13.17.6.1.1.4 | Columnxdsl2ExtPMLineLoss | read-only | current | Count of seconds since system restarted that there was LOS (or LOS-FE for xTU-R). |
| 1.3.6.1.4.1.890.1.5.13.13.17.6.1.1.5 | Columnxdsl2ExtPMLineUas | read-only | current | Count of seconds in Unavailability State since system restarted. Unavailability begins at the onset of 10 contiguous severely errored seconds, and ends at the … |
| 1.3.6.1.4.1.890.1.5.13.13.17.6.2 | Tablexdsl2ExtPMLineInitTable | not-accessible | current | The table xdsl2ExtPMLineInitTable contains PM line initialization history for DSL lines since system restarted. |
| 1.3.6.1.4.1.890.1.5.13.13.17.6.2.1 | Rowxdsl2ExtPMLineInitEntry | not-accessible | current | An entry extends xdsl2PMLineInitCurrEntry defined in RFC5650. |
| 1.3.6.1.4.1.890.1.5.13.13.17.6.2.1.1 | Columnxdsl2ExtPMLInitFullInits | read-only | current | Count of full initializations attempted on the line (successful and failed) since system restarted. |
| 1.3.6.1.4.1.890.1.5.13.13.17.6.2.1.2 | Columnxdsl2ExtPMLInitFailedFullInits | read-only | current | Count of failed full initializations on the line since system restarted. |
| 1.3.6.1.4.1.890.1.5.13.13.17.6.3 | Tablexdsl2ExtPMChTable | not-accessible | current | The table contains Performance Monitoring results for DSL channels since system restarted. |
| 1.3.6.1.4.1.890.1.5.13.13.17.6.3.1 | Rowxdsl2ExtPMChEntry | not-accessible | current | An entry extends xdsl2PMChCurrEntry defined in RFC5650 |
| 1.3.6.1.4.1.890.1.5.13.13.17.6.3.1.1 | Columnxdsl2ExtPMChCodingViolations | read-only | current | Count of CRC-8 (FEBE for xTU-R) anomalies occurring in the channel during the interval. This parameter is inhibited during UAS or SES. If the CRC is applied ov… |
| 1.3.6.1.4.1.890.1.5.13.13.17.6.3.1.2 | Columnxdsl2ExtPMChCorrectedBlocks | read-only | current | Count of FEC (FFEC for xTU-R) anomalies (corrected code words) occurring in the channel during the interval. This parameter is inhibited during UAS or SES. If … |
| 1.3.6.1.4.1.890.1.5.13.13.17.6.3.1.3 | Columnxdsl2ExtPMChUncorrectBlocks | read-only | current | Performance channel uncorrected blocks. |
| 1.3.6.1.4.1.890.1.5.13.13.17.6.3.1.4 | Columnxdsl2ExtPMChRtxCW | read-only | current | Performance channel Rtx code word. |
| 1.3.6.1.4.1.890.1.5.13.13.17.6.3.1.5 | Columnxdsl2ExtPMChRtxCorrectedCW | read-only | current | Performance channel Rtx corrected code word. |
| 1.3.6.1.4.1.890.1.5.13.13.17.6.3.1.6 | Columnxdsl2ExtPMChRtxUncorrectedCW | read-only | current | Performance channel Rtx uncorrected code word. |
| 1.3.6.1.4.1.890.1.5.13.13.17.6.4 | Tablexdsl2ExtPMLineCurrTable | not-accessible | current | The table xdsl2ExtPMLineCurrTable extends xdsl2PMLineCurrTable. |
| 1.3.6.1.4.1.890.1.5.13.13.17.6.4.1 | Rowxdsl2ExtPMLineCurrEntry | not-accessible | current | The table xdsl2ExtPMLineCurrTable extends xdsl2PMLineCurrTable. |
| 1.3.6.1.4.1.890.1.5.13.13.17.6.4.1.1 | Columnxdsl2PMLCurr15MLofs | read-only | current | Count of seconds during this interval that there was LOF. |
| 1.3.6.1.4.1.890.1.5.13.13.17.6.4.1.2 | Columnxdsl2PMLCurr15MLol | read-only | current | Count of times during this interval that the line Loss of Link. |
| 1.3.6.1.4.1.890.1.5.13.13.17.6.4.1.3 | Columnxdsl2PMLCurr15MLols | read-only | current | Count of seconds during this interval that there was Loss of Link. |
| 1.3.6.1.4.1.890.1.5.13.13.17.6.4.1.4 | Columnxdsl2PMLCurr15MLpr | read-only | current | Count of times during this interval that the line Loss of Power. |
| 1.3.6.1.4.1.890.1.5.13.13.17.6.4.1.5 | Columnxdsl2PMLCurr15MLprs | read-only | current | Count of seconds during this interval that there was Loss of Power. |
| 1.3.6.1.4.1.890.1.5.13.13.17.6.4.1.6 | Columnxdsl2PMLCurr1DayLofs | read-only | current | Count of seconds during this interval that there was LOF. |
| 1.3.6.1.4.1.890.1.5.13.13.17.6.4.1.7 | Columnxdsl2PMLCurr1DayLol | read-only | current | Count of times during this interval that the line Loss of Link. |
| 1.3.6.1.4.1.890.1.5.13.13.17.6.4.1.8 | Columnxdsl2PMLCurr1DayLols | read-only | current | Count of seconds during this interval that there was Loss of Link. |
| 1.3.6.1.4.1.890.1.5.13.13.17.6.4.1.9 | Columnxdsl2PMLCurr1DayLpr | read-only | current | Count of times during this interval that the line Loss of Power. |
| 1.3.6.1.4.1.890.1.5.13.13.17.6.4.1.10 | Columnxdsl2PMLCurr1DayLprs | read-only | current | Count of seconds during this interval that there was Loss of Power. |
| 1.3.6.1.4.1.890.1.5.13.13.17.6.5 | Tablexdsl2ExtPMLineHist15MinTable | not-accessible | current | The table xdsl2ExtPMLineHist15MinTable extends xdsl2PMLineHist15MinTable. |
| 1.3.6.1.4.1.890.1.5.13.13.17.6.5.1 | Rowxdsl2ExtPMLineHist15MinEntry | not-accessible | current | The table xdsl2ExtPMLineHist15MinTable extends xdsl2PMLineHist15MinTable. |
| 1.3.6.1.4.1.890.1.5.13.13.17.6.5.1.1 | Columnxdsl2PMLHist15MLofs | read-only | current | Count of seconds during this interval that there was LOF. |
| 1.3.6.1.4.1.890.1.5.13.13.17.6.5.1.2 | Columnxdsl2PMLHist15MLol | read-only | current | Count of times during this interval that the line Loss of Link. |
| 1.3.6.1.4.1.890.1.5.13.13.17.6.5.1.3 | Columnxdsl2PMLHist15MLols | read-only | current | Count of seconds during this interval that the line Loss of Link. |
| 1.3.6.1.4.1.890.1.5.13.13.17.6.5.1.4 | Columnxdsl2PMLHist15MLpr | read-only | current | Count of times during this interval that the line Loss of Power. |
| 1.3.6.1.4.1.890.1.5.13.13.17.6.5.1.5 | Columnxdsl2PMLHist15MLprs | read-only | current | Count of seconds during this interval that the line Loss of Power. |
| 1.3.6.1.4.1.890.1.5.13.13.17.6.6 | Tablexdsl2ExtPMLineHist1DayTable | not-accessible | current | The table xdsl2ExtPMLineHist1DayTable extends xdsl2PMLineHist1DayTable. |
| 1.3.6.1.4.1.890.1.5.13.13.17.6.6.1 | Rowxdsl2ExtPMLineHist1DayEntry | not-accessible | current | The table xdsl2ExtPMLineHist1DayTable extends xdsl2PMLineHist1DayTable. |
| 1.3.6.1.4.1.890.1.5.13.13.17.6.6.1.1 | Columnxdsl2PMLHist1DLofs | read-only | current | Count of seconds during this interval that there was LOF. |
| 1.3.6.1.4.1.890.1.5.13.13.17.6.6.1.2 | Columnxdsl2PMLHist1DLol | read-only | current | Count of times during this interval that the line Loss of Link. |
| 1.3.6.1.4.1.890.1.5.13.13.17.6.6.1.3 | Columnxdsl2PMLHist1DLols | read-only | current | Count of seconds during this interval that the line Loss of Link. |
| 1.3.6.1.4.1.890.1.5.13.13.17.6.6.1.4 | Columnxdsl2PMLHist1DLpr | read-only | current | Count of times during this interval that the line Loss of Power. |
| 1.3.6.1.4.1.890.1.5.13.13.17.6.6.1.5 | Columnxdsl2PMLHist1DLprs | read-only | current | Count of seconds during this interval that the line Loss of Power. |
| 1.3.6.1.4.1.890.1.5.13.13.17.6.7 | Tablexdsl2ExtPMChCurrTable | not-accessible | current | The table xdsl2ExtPMChCurrTable extends xdsl2PMChCurrTable. |
| 1.3.6.1.4.1.890.1.5.13.13.17.6.7.1 | Rowxdsl2ExtPMChCurrEntry | not-accessible | current | The table xdsl2ExtPMChCurrTable extends xdsl2PMChCurrTable. |
| 1.3.6.1.4.1.890.1.5.13.13.17.6.7.1.1 | Columnxdsl2PMChCurr15MUncorrectBlocks | read-only | current | Performance channel uncorrected blocks. |
| 1.3.6.1.4.1.890.1.5.13.13.17.6.7.1.2 | Columnxdsl2PMChCurr15MRtxCW | read-only | current | Performance channel Rtx code word. |
| 1.3.6.1.4.1.890.1.5.13.13.17.6.7.1.3 | Columnxdsl2PMChCurr15MRtxCorrectedCW | read-only | current | Performance channel Rtx corrected code word. |
| 1.3.6.1.4.1.890.1.5.13.13.17.6.7.1.4 | Columnxdsl2PMChCurr15MRtxUnorrectedCW | read-only | current | Performance channel Rtx uncorrected code word. |
| 1.3.6.1.4.1.890.1.5.13.13.17.6.7.1.5 | Columnxdsl2PMChCurr1DayUncorrectBlocks | read-only | current | Performance channel uncorrected blocks. |
| 1.3.6.1.4.1.890.1.5.13.13.17.6.7.1.6 | Columnxdsl2PMChCurr1DayRtxCW | read-only | current | Performance channel Rtx code word. |
| 1.3.6.1.4.1.890.1.5.13.13.17.6.7.1.7 | Columnxdsl2PMChCurr1DayRtxCorrectedCW | read-only | current | Performance channel Rtx corrected code word. |
| 1.3.6.1.4.1.890.1.5.13.13.17.6.7.1.8 | Columnxdsl2PMChCurr1DayRtxUnorrectedCW | read-only | current | Performance channel Rtx uncorrected code word. |
| 1.3.6.1.4.1.890.1.5.13.13.17.6.8 | Tablexdsl2ExtPMChHist15MinTable | not-accessible | current | The table xdsl2ExtPMChHist15MinTable extends xdsl2PMChHist15MinTable. |
| 1.3.6.1.4.1.890.1.5.13.13.17.6.8.1 | Rowxdsl2ExtPMChHist15MinEntry | not-accessible | current | The table xdsl2ExtPMChHist15MinTable extends xdsl2PMChHist15MinTable. |
| 1.3.6.1.4.1.890.1.5.13.13.17.6.8.1.1 | Columnxdsl2PMChHist15MUncorrectBlocks | read-only | current | Performance channel uncorrected blocks. |
| 1.3.6.1.4.1.890.1.5.13.13.17.6.8.1.2 | Columnxdsl2PMChHist15MRtxCW | read-only | current | Performance channel Rtx code word. |
| 1.3.6.1.4.1.890.1.5.13.13.17.6.8.1.3 | Columnxdsl2PMChHist15MRtxCorrectedCW | read-only | current | Performance channel Rtx corrected code word. |
| 1.3.6.1.4.1.890.1.5.13.13.17.6.8.1.4 | Columnxdsl2PMChHist15MRtxUncorrectedCW | read-only | current | Performance channel Rtx uncorrected code word. |
| 1.3.6.1.4.1.890.1.5.13.13.17.6.9 | Tablexdsl2ExtPMChHist1DayTable | not-accessible | current | The table xdsl2ExtPMChHist1DayTable extends xdsl2PMChHist1DayTable. |
| 1.3.6.1.4.1.890.1.5.13.13.17.6.9.1 | Rowxdsl2ExtPMChHist1DayEntry | not-accessible | current | The table xdsl2ExtPMChHist1DayTable extends xdsl2PMChHist1DayTable. |
| 1.3.6.1.4.1.890.1.5.13.13.17.6.9.1.1 | Columnxdsl2PMChHist1DayUncorrectBlocks | read-only | current | Performance channel uncorrected blocks. |
| 1.3.6.1.4.1.890.1.5.13.13.17.6.9.1.2 | Columnxdsl2PMChHist1DayRtxCW | read-only | current | Performance channel Rtx code word. |
| 1.3.6.1.4.1.890.1.5.13.13.17.6.9.1.3 | Columnxdsl2PMChHist1DayRtxCorrectedCW | read-only | current | Performance channel Rtx corrected code word. |
| 1.3.6.1.4.1.890.1.5.13.13.17.6.9.1.4 | Columnxdsl2PMChHist1DayRtxUncorrectedCW | read-only | current | Performance channel Rtx uncorrected code word. |
| 1.3.6.1.4.1.890.1.5.13.13.17.7 | Nodegvector | |||
| 1.3.6.1.4.1.890.1.5.13.13.17.7.2 | TablegvectorModeTable | not-accessible | current | A table containing the G.Vector information for each VDSL cards. |
| 1.3.6.1.4.1.890.1.5.13.13.17.7.2.1 | RowgvectorModeEntry | not-accessible | current | An entry of gvectorModeTable. The index is slotModuleId. |
| 1.3.6.1.4.1.890.1.5.13.13.17.7.2.1.1 | ColumngvectorMode | read-write | current | Configure G.Vector mode for each VDSL cards. blv supports all types of chassis. slv is not supported on IES4204 only. dlv is supported on IES4204 only. |
| 1.3.6.1.4.1.890.1.5.13.13.17.7.2.1.2 | ColumnrunningGvectorMode | read-only | current | Current running G.Vector mode of each VDSL cards. |
| 1.3.6.1.4.1.890.1.5.13.13.17.8 | Nodeldm | |||
| 1.3.6.1.4.1.890.1.5.13.13.17.8.1 | ScalarldmTarget | read-write | current | IfIndex of the port which would be performed ldm test. |
| 1.3.6.1.4.1.890.1.5.13.13.17.8.2 | ScalarldmOps | read-write | current | The manager sets the object to 1 to start the ldm test and the agent clears the object to zero when ldm test is successfully completed. |
| 1.3.6.1.4.1.890.1.5.13.13.17.8.3 | ScalarldmStatus | read-only | current | Status description of ldm test result. |
| 1.3.6.1.4.1.890.1.5.13.13.17.8.4 | ScalarldmAtucLoopAttenuation | read-only | current | Loop Attenuation. |
| 1.3.6.1.4.1.890.1.5.13.13.17.8.5 | ScalarldmAtucSignalAttenuation | read-only | current | Signal Attenuation. |
| 1.3.6.1.4.1.890.1.5.13.13.17.8.6 | ScalarldmAtucSignalMargin | read-only | current | Signal Margin. |
| 1.3.6.1.4.1.890.1.5.13.13.17.8.7 | ScalarldmAtucAggregateTxPower | read-only | current | Actual Aggregate Transmit Power. |
| 1.3.6.1.4.1.890.1.5.13.13.17.8.8 | ScalarldmAtucAttainableBitRate | read-only | current | Attainable Bit Rate. |
| 1.3.6.1.4.1.890.1.5.13.13.17.8.9 | ScalarldmAturLoopAttenuation | read-only | current | Loop Attenuation. |
| 1.3.6.1.4.1.890.1.5.13.13.17.8.10 | ScalarldmAturSignalAttenuation | read-only | current | Signal Attenuation. |
| 1.3.6.1.4.1.890.1.5.13.13.17.8.11 | ScalarldmAturSignalMargin | read-only | current | Signal Margin. |
| 1.3.6.1.4.1.890.1.5.13.13.17.8.12 | ScalarldmAturAggregateTxPower | read-only | current | Actual Aggregate Transmit Power. |
| 1.3.6.1.4.1.890.1.5.13.13.17.8.13 | ScalarldmAturAttainableBitRate | read-only | current | Attainable Bit Rate. |
| 1.3.6.1.4.1.890.1.5.13.13.17.8.14 | ScalarldmAtucNumOfSubcarriersPerPort | read-only | current | The number of subcarriers per port for ATU-C. |
| 1.3.6.1.4.1.890.1.5.13.13.17.8.15 | ScalarldmAturNumOfSubcarriersPerPort | read-only | current | The number of subcarriers per port for ATU-R. |
| 1.3.6.1.4.1.890.1.5.13.13.17.8.16 | ScalarldmAtucHlinScale | read-only | current | Scale of Hlin. |
| 1.3.6.1.4.1.890.1.5.13.13.17.8.17 | ScalarldmAtucHlinReal1 | read-only | current | The object provides real part of Hlin for the first 256 subcarriers. Each subcarrier takes two octets to store the value. |
| 1.3.6.1.4.1.890.1.5.13.13.17.8.18 | ScalarldmAtucHlinReal2 | read-only | current | The object provides real part of Hlin for the last 256 subcarriers. Each subcarrier takes two octets to store the value. |
| 1.3.6.1.4.1.890.1.5.13.13.17.8.19 | ScalarldmAtucHlinImage1 | read-only | current | The object provides image part of Hlin for the first 256 subcarriers. Each subcarrier takes two octets to store the value. |
| 1.3.6.1.4.1.890.1.5.13.13.17.8.20 | ScalarldmAtucHlinImage2 | read-only | current | The object provides image part of Hlin for the last 256 subcarriers. Each subcarrier takes two octets to store the value. |
| 1.3.6.1.4.1.890.1.5.13.13.17.8.21 | ScalarldmAtucHlog1 | read-only | current | The object provides Hlog for the first 256 subcarriers. Each subcarrier takes two octets to store the value. A special value -32768 indicates that no measureme… |
| 1.3.6.1.4.1.890.1.5.13.13.17.8.22 | ScalarldmAtucHlog2 | read-only | current | The object provides Hlog for the last 256 subcarriers. Each subcarrier takes two octets to store the value. A special value -32768 indicates that no measuremen… |
| 1.3.6.1.4.1.890.1.5.13.13.17.8.23 | ScalarldmAtucQln1 | read-only | current | The object provides QLN for the first 256 subcarriers. Each subcarrier takes two octets to store the value. A special value 0 indicates that no measurement cou… |
| 1.3.6.1.4.1.890.1.5.13.13.17.8.24 | ScalarldmAtucQln2 | read-only | current | The object provides QLN for the last 256 subcarriers. Each subcarrier takes two octets to store the value. A special value 0 indicates that no measurement coul… |
| 1.3.6.1.4.1.890.1.5.13.13.17.8.25 | ScalarldmAtucSnr1 | read-only | current | The object provides SNR for the first 256 subcarriers. Each subcarrier takes two octets to store the value. A special value -32768 indicates that no measuremen… |
| 1.3.6.1.4.1.890.1.5.13.13.17.8.26 | ScalarldmAtucSnr2 | read-only | current | The object provides SNR for the last 256 subcarriers. Each subcarrier takes two octets to store the value. A special value -32768 indicates that no measurement… |
| 1.3.6.1.4.1.890.1.5.13.13.17.8.27 | ScalarldmAturHlinScale | read-only | current | Scale of Hlin. |
| 1.3.6.1.4.1.890.1.5.13.13.17.8.28 | ScalarldmAturHlinReal | read-only | current | Real part of Hlin. Each subcarrier takes two octets to store the value. |
| 1.3.6.1.4.1.890.1.5.13.13.17.8.29 | ScalarldmAturHlinImage | read-only | current | Image part of Hlin. Each subcarrier takes two octets to store the value. |
| 1.3.6.1.4.1.890.1.5.13.13.17.8.30 | ScalarldmAturHlog | read-only | current | Hlog of subcarrier. Each subcarrier takes two octets to store the value. A special value -32768 indicates that no measurement could be done for the sub-carrier… |
| 1.3.6.1.4.1.890.1.5.13.13.17.8.31 | ScalarldmAturQln | read-only | current | QLN of subcarrier. Each subcarrier takes two octets to store the value. A special value 0 indicates that no measurement could be done for the sub-carrier group. |
| 1.3.6.1.4.1.890.1.5.13.13.17.8.32 | ScalarldmAturSnr | read-only | current | SNR of subcarrier. Each subcarrier takes two octets to store the value. A special value -32768 indicates that no measurement could be done for the sub-carrier … |
| 1.3.6.1.4.1.890.1.5.13.13.17.9 | Nodepintransform | |||
| 1.3.6.1.4.1.890.1.5.13.13.17.9.1 | TablepinTransFormModeTable | not-accessible | current | A table containing the PIN to port mapping for each VDSL cards. |
| 1.3.6.1.4.1.890.1.5.13.13.17.9.1.1 | RowpinTransFormModeEntry | not-accessible | current | An entry of pinTransFormModeTable. The index is slotModuleId. |
| 1.3.6.1.4.1.890.1.5.13.13.17.9.1.1.1 | ColumnpinTransFormMode | read-write | current | Configure PIN to port mapping for each VDSL cards. |
| 1.3.6.1.4.1.890.1.5.13.13.17.10 | NodeseltCalibration | |||
| 1.3.6.1.4.1.890.1.5.13.13.17.10.1 | ScalarseltCalibrationTarget | read-write | current | IfIndex of the port which would be performed selt calibration test. |
| 1.3.6.1.4.1.890.1.5.13.13.17.10.2 | ScalarseltCalibrationOps | read-write | current | The manager sets the object to 1 to start the selt calibration and the agent clears the object to zero when selt is not in progress. |
| 1.3.6.1.4.1.890.1.5.13.13.17.10.3 | ScalarseltCalibrationFrontEndDelay | read-only | current | |
| 1.3.6.1.4.1.890.1.5.13.13.17.10.4 | ScalarseltCalibrationFrontEndGain | read-only | current | |
| 1.3.6.1.4.1.890.1.5.13.13.17.10.5 | ScalarseltCalibrationShortSeltDelay | read-only | current | |
| 1.3.6.1.4.1.890.1.5.13.13.17.10.6 | ScalarseltCalibrationGain1 | read-only | current | |
| 1.3.6.1.4.1.890.1.5.13.13.17.10.7 | ScalarseltCalibrationGain2 | read-only | current | |
| 1.3.6.1.4.1.890.1.5.13.13.17.10.8 | ScalarseltCalibrationL0 | read-only | current | |
| 1.3.6.1.4.1.890.1.5.13.13.17.11 | NodevdslInmCounter | |||
| 1.3.6.1.4.1.890.1.5.13.13.17.11.1 | TablevdslInmCountCurrent | not-accessible | current | Displays current DSL line status on specified UNI ports line Displays DSL detail line information on specified |
| 1.3.6.1.4.1.890.1.5.13.13.17.11.1.1 | RowvdslInmCountCurrentEntry | not-accessible | current | an entry displays current DSL line status on specified UNI ports line Displays DSL detail line information on specified, when vdslInmCountUnit is 1 mean xtuc, … |
| 1.3.6.1.4.1.890.1.5.13.13.17.11.1.1.1 | ColumnvdslInmCountCurEQINP1 | read-only | current | EQINP1 |
| 1.3.6.1.4.1.890.1.5.13.13.17.11.1.1.2 | ColumnvdslInmCountCurEQINP2 | read-only | current | EQINP2 |
| 1.3.6.1.4.1.890.1.5.13.13.17.11.1.1.3 | ColumnvdslInmCountCurEQINP3 | read-only | current | EQINP3 |
| 1.3.6.1.4.1.890.1.5.13.13.17.11.1.1.4 | ColumnvdslInmCountCurEQINP4 | read-only | current | EQINP4 |
| 1.3.6.1.4.1.890.1.5.13.13.17.11.1.1.5 | ColumnvdslInmCountCurEQINP5 | read-only | current | EQINP5 |
| 1.3.6.1.4.1.890.1.5.13.13.17.11.1.1.6 | ColumnvdslInmCountCurEQINP6 | read-only | current | EQINP6 |
| 1.3.6.1.4.1.890.1.5.13.13.17.11.1.1.7 | ColumnvdslInmCountCurEQINP7 | read-only | current | EQINP7 |
| 1.3.6.1.4.1.890.1.5.13.13.17.11.1.1.8 | ColumnvdslInmCountCurEQINP8 | read-only | current | EQINP8 |
| 1.3.6.1.4.1.890.1.5.13.13.17.11.1.1.9 | ColumnvdslInmCountCurEQINP9 | read-only | current | EQINP9 |
| 1.3.6.1.4.1.890.1.5.13.13.17.11.1.1.10 | ColumnvdslInmCountCurEQINP10 | read-only | current | EQINP10 |
| 1.3.6.1.4.1.890.1.5.13.13.17.11.1.1.11 | ColumnvdslInmCountCurEQINP11 | read-only | current | EQINP11 |
| 1.3.6.1.4.1.890.1.5.13.13.17.11.1.1.12 | ColumnvdslInmCountCurEQINP12 | read-only | current | EQINP12 |
| 1.3.6.1.4.1.890.1.5.13.13.17.11.1.1.13 | ColumnvdslInmCountCurEQINP13 | read-only | current | EQINP13 |
| 1.3.6.1.4.1.890.1.5.13.13.17.11.1.1.14 | ColumnvdslInmCountCurEQINP14 | read-only | current | EQINP14 |
| 1.3.6.1.4.1.890.1.5.13.13.17.11.1.1.15 | ColumnvdslInmCountCurEQINP15 | read-only | current | EQINP15 |
| 1.3.6.1.4.1.890.1.5.13.13.17.11.1.1.16 | ColumnvdslInmCountCurEQINP16 | read-only | current | EQINP16 |
| 1.3.6.1.4.1.890.1.5.13.13.17.11.1.1.17 | ColumnvdslInmCountCurEQINP17 | read-only | current | EQINP17 |
| 1.3.6.1.4.1.890.1.5.13.13.17.11.1.1.18 | ColumnvdslInmCountCurIAT0 | read-only | current | IAT0 |
| 1.3.6.1.4.1.890.1.5.13.13.17.11.1.1.19 | ColumnvdslInmCountCurIAT1 | read-only | current | IAT1 |
| 1.3.6.1.4.1.890.1.5.13.13.17.11.1.1.20 | ColumnvdslInmCountCurIAT2 | read-only | current | IAT2 |
| 1.3.6.1.4.1.890.1.5.13.13.17.11.1.1.21 | ColumnvdslInmCountCurIAT3 | read-only | current | IAT3 |
| 1.3.6.1.4.1.890.1.5.13.13.17.11.1.1.22 | ColumnvdslInmCountCurIAT4 | read-only | current | IAT4 |
| 1.3.6.1.4.1.890.1.5.13.13.17.11.1.1.23 | ColumnvdslInmCountCurIAT5 | read-only | current | IAT5 |
| 1.3.6.1.4.1.890.1.5.13.13.17.11.1.1.24 | ColumnvdslInmCountCurIAT6 | read-only | current | IAT6 |
| 1.3.6.1.4.1.890.1.5.13.13.17.11.1.1.25 | ColumnvdslInmCountCurIAT7 | read-only | current | IAT7 |
| 1.3.6.1.4.1.890.1.5.13.13.17.11.1.1.26 | ColumnvdslInmCountCurSYMBOLS | read-only | current | SYMBOLS |
| 1.3.6.1.4.1.890.1.5.13.13.17.11.2 | TablevdslInmCount15min | not-accessible | current | Displays 15-min DSL line status on specified UNI ports line Displays DSL detail line information on specified |
| 1.3.6.1.4.1.890.1.5.13.13.17.11.2.1 | RowvdslInmCount15minEntry | not-accessible | current | an entry displays 15-min DSL line status on specified UNI ports line Displays DSL detail line information on specified, when vdslInmCountUnit is 1 mean xtuc, 2… |
| 1.3.6.1.4.1.890.1.5.13.13.17.11.2.1.1 | ColumnvdslInmCount15minEQINP1 | read-only | current | EQINP1 |
| 1.3.6.1.4.1.890.1.5.13.13.17.11.2.1.2 | ColumnvdslInmCount15minEQINP2 | read-only | current | EQINP2 |
| 1.3.6.1.4.1.890.1.5.13.13.17.11.2.1.3 | ColumnvdslInmCount15minEQINP3 | read-only | current | EQINP3 |
| 1.3.6.1.4.1.890.1.5.13.13.17.11.2.1.4 | ColumnvdslInmCount15minEQINP4 | read-only | current | EQINP4 |
| 1.3.6.1.4.1.890.1.5.13.13.17.11.2.1.5 | ColumnvdslInmCount15minEQINP5 | read-only | current | EQINP5 |
| 1.3.6.1.4.1.890.1.5.13.13.17.11.2.1.6 | ColumnvdslInmCount15minEQINP6 | read-only | current | EQINP6 |
| 1.3.6.1.4.1.890.1.5.13.13.17.11.2.1.7 | ColumnvdslInmCount15minEQINP7 | read-only | current | EQINP7 |
| 1.3.6.1.4.1.890.1.5.13.13.17.11.2.1.8 | ColumnvdslInmCount15minEQINP8 | read-only | current | EQINP8 |
| 1.3.6.1.4.1.890.1.5.13.13.17.11.2.1.9 | ColumnvdslInmCount15minEQINP9 | read-only | current | EQINP9 |
| 1.3.6.1.4.1.890.1.5.13.13.17.11.2.1.10 | ColumnvdslInmCount15minEQINP10 | read-only | current | EQINP10 |
| 1.3.6.1.4.1.890.1.5.13.13.17.11.2.1.11 | ColumnvdslInmCount15minEQINP11 | read-only | current | EQINP11 |
| 1.3.6.1.4.1.890.1.5.13.13.17.11.2.1.12 | ColumnvdslInmCount15minEQINP12 | read-only | current | EQINP12 |
| 1.3.6.1.4.1.890.1.5.13.13.17.11.2.1.13 | ColumnvdslInmCount15minEQINP13 | read-only | current | EQINP13 |
| 1.3.6.1.4.1.890.1.5.13.13.17.11.2.1.14 | ColumnvdslInmCount15minEQINP14 | read-only | current | EQINP14 |
| 1.3.6.1.4.1.890.1.5.13.13.17.11.2.1.15 | ColumnvdslInmCount15minEQINP15 | read-only | current | EQINP15 |
| 1.3.6.1.4.1.890.1.5.13.13.17.11.2.1.16 | ColumnvdslInmCount15minEQINP16 | read-only | current | EQINP16 |
| 1.3.6.1.4.1.890.1.5.13.13.17.11.2.1.17 | ColumnvdslInmCount15minEQINP17 | read-only | current | EQINP17 |
| 1.3.6.1.4.1.890.1.5.13.13.17.11.2.1.18 | ColumnvdslInmCount15minIAT0 | read-only | current | IAT0 |
| 1.3.6.1.4.1.890.1.5.13.13.17.11.2.1.19 | ColumnvdslInmCount15minIAT1 | read-only | current | IAT1 |
| 1.3.6.1.4.1.890.1.5.13.13.17.11.2.1.20 | ColumnvdslInmCount15minIAT2 | read-only | current | IAT2 |
| 1.3.6.1.4.1.890.1.5.13.13.17.11.2.1.21 | ColumnvdslInmCount15minIAT3 | read-only | current | IAT3 |
| 1.3.6.1.4.1.890.1.5.13.13.17.11.2.1.22 | ColumnvdslInmCount15minIAT4 | read-only | current | IAT4 |
| 1.3.6.1.4.1.890.1.5.13.13.17.11.2.1.23 | ColumnvdslInmCount15minIAT5 | read-only | current | IAT5 |
| 1.3.6.1.4.1.890.1.5.13.13.17.11.2.1.24 | ColumnvdslInmCount15minIAT6 | read-only | current | IAT6 |
| 1.3.6.1.4.1.890.1.5.13.13.17.11.2.1.25 | ColumnvdslInmCount15minIAT7 | read-only | current | IAT7 |
| 1.3.6.1.4.1.890.1.5.13.13.17.11.2.1.26 | ColumnvdslInmCount15minSYMBOLS | read-only | current | SYMBOLS |
| 1.3.6.1.4.1.890.1.5.13.13.17.11.3 | TablevdslInmCount1day | not-accessible | current | Displays 1-day DSL line status on specified UNI ports line Displays DSL detail line information on specified |
| 1.3.6.1.4.1.890.1.5.13.13.17.11.3.1 | RowvdslInmCount1dayEntry | not-accessible | current | an entry displays 1-day DSL line status on specified UNI ports line Displays DSL detail line information on specified, when vdslInmCountUnit is 1 mean xtuc, 2 … |
| 1.3.6.1.4.1.890.1.5.13.13.17.11.3.1.1 | ColumnvdslInmCount1dayEQINP1 | read-only | current | EQINP1 |
| 1.3.6.1.4.1.890.1.5.13.13.17.11.3.1.2 | ColumnvdslInmCount1dayEQINP2 | read-only | current | EQINP2 |
| 1.3.6.1.4.1.890.1.5.13.13.17.11.3.1.3 | ColumnvdslInmCount1dayEQINP3 | read-only | current | EQINP3 |
| 1.3.6.1.4.1.890.1.5.13.13.17.11.3.1.4 | ColumnvdslInmCount1dayEQINP4 | read-only | current | EQINP4 |
| 1.3.6.1.4.1.890.1.5.13.13.17.11.3.1.5 | ColumnvdslInmCount1dayEQINP5 | read-only | current | EQINP5 |
| 1.3.6.1.4.1.890.1.5.13.13.17.11.3.1.6 | ColumnvdslInmCount1dayEQINP6 | read-only | current | EQINP6 |
| 1.3.6.1.4.1.890.1.5.13.13.17.11.3.1.7 | ColumnvdslInmCount1dayEQINP7 | read-only | current | EQINP7 |
| 1.3.6.1.4.1.890.1.5.13.13.17.11.3.1.8 | ColumnvdslInmCount1dayEQINP8 | read-only | current | EQINP8 |
| 1.3.6.1.4.1.890.1.5.13.13.17.11.3.1.9 | ColumnvdslInmCount1dayEQINP9 | read-only | current | EQINP9 |
| 1.3.6.1.4.1.890.1.5.13.13.17.11.3.1.10 | ColumnvdslInmCount1dayEQINP10 | read-only | current | EQINP10 |
| 1.3.6.1.4.1.890.1.5.13.13.17.11.3.1.11 | ColumnvdslInmCount1dayEQINP11 | read-only | current | EQINP11 |
| 1.3.6.1.4.1.890.1.5.13.13.17.11.3.1.12 | ColumnvdslInmCount1dayEQINP12 | read-only | current | EQINP12 |
| 1.3.6.1.4.1.890.1.5.13.13.17.11.3.1.13 | ColumnvdslInmCount1dayEQINP13 | read-only | current | EQINP13 |
| 1.3.6.1.4.1.890.1.5.13.13.17.11.3.1.14 | ColumnvdslInmCount1dayEQINP14 | read-only | current | EQINP14 |
| 1.3.6.1.4.1.890.1.5.13.13.17.11.3.1.15 | ColumnvdslInmCount1dayEQINP15 | read-only | current | EQINP15 |
| 1.3.6.1.4.1.890.1.5.13.13.17.11.3.1.16 | ColumnvdslInmCount1dayEQINP16 | read-only | current | EQINP16 |
| 1.3.6.1.4.1.890.1.5.13.13.17.11.3.1.17 | ColumnvdslInmCount1dayEQINP17 | read-only | current | EQINP17 |
| 1.3.6.1.4.1.890.1.5.13.13.17.11.3.1.18 | ColumnvdslInmCount1dayIAT0 | read-only | current | IAT0 |
| 1.3.6.1.4.1.890.1.5.13.13.17.11.3.1.19 | ColumnvdslInmCount1dayIAT1 | read-only | current | IAT1 |
| 1.3.6.1.4.1.890.1.5.13.13.17.11.3.1.20 | ColumnvdslInmCount1dayIAT2 | read-only | current | IAT2 |
| 1.3.6.1.4.1.890.1.5.13.13.17.11.3.1.21 | ColumnvdslInmCount1dayIAT3 | read-only | current | IAT3 |
| 1.3.6.1.4.1.890.1.5.13.13.17.11.3.1.22 | ColumnvdslInmCount1dayIAT4 | read-only | current | IAT4 |
| 1.3.6.1.4.1.890.1.5.13.13.17.11.3.1.23 | ColumnvdslInmCount1dayIAT5 | read-only | current | IAT5 |
| 1.3.6.1.4.1.890.1.5.13.13.17.11.3.1.24 | ColumnvdslInmCount1dayIAT6 | read-only | current | IAT6 |
| 1.3.6.1.4.1.890.1.5.13.13.17.11.3.1.25 | ColumnvdslInmCount1dayIAT7 | read-only | current | IAT7 |
| 1.3.6.1.4.1.890.1.5.13.13.17.11.3.1.26 | ColumnvdslInmCount1daySYMBOLS | read-only | current | SYMBOLS |
| 1.3.6.1.4.1.890.1.5.13.13.17.12 | NodexturInfo | |||
| 1.3.6.1.4.1.890.1.5.13.13.17.12.1 | TablexturInfoTable | not-accessible | current | xtur info table |
| 1.3.6.1.4.1.890.1.5.13.13.17.12.1.1 | RowxturInfoEntry | not-accessible | current | |
| 1.3.6.1.4.1.890.1.5.13.13.17.12.1.1.1 | ColumnxturInfoHsCountryCode | read-only | current | Displays XTUR HS country code on specific port. |
| 1.3.6.1.4.1.890.1.5.13.13.17.12.1.1.2 | ColumnxturInfoHsProviderCode | read-only | current | Displays XTUR HS provider code on specific port. |
| 1.3.6.1.4.1.890.1.5.13.13.17.12.1.1.3 | ColumnxturInfoHsVendorInfo | read-only | current | Displays XTUR HS vendor info on specific port. |
| 1.3.6.1.4.1.890.1.5.13.13.17.12.1.1.4 | ColumnxturInfoFeSysCountryCode | read-only | current | Displays XTUR FE system country code on specific port. |
| 1.3.6.1.4.1.890.1.5.13.13.17.12.1.1.5 | ColumnxturInfoFeSysProviderCode | read-only | current | Displays XTUR FE system provider code on specific port. |
| 1.3.6.1.4.1.890.1.5.13.13.17.12.1.1.6 | ColumnxturInfoFeSysVendorInfo | read-only | current | Displays XTUR FE system vendor info on specific port. |
| 1.3.6.1.4.1.890.1.5.13.13.17.12.1.1.7 | ColumnxturInfoFeSysVersion | read-only | current | Displays XTUR FE system version on specific port. |
| 1.3.6.1.4.1.890.1.5.13.13.17.12.1.1.8 | ColumnxturInfoFeSysSerial | read-only | current | Displays XTUR FE system serial number on specific port. |
| 1.3.6.1.4.1.890.1.5.13.13.20 | Nodecoa | |||
| 1.3.6.1.4.1.890.1.5.13.13.20.1 | ScalarcoaConfIssueThreshold | read-write | current | CPU overload alarm issue threshold. CPU overload alarm issue threshold should be higher than CPU overload alarm clear threshold. The default one will be 90% CP… |
| 1.3.6.1.4.1.890.1.5.13.13.20.2 | ScalarcoaConfClearThreshold | read-write | current | CPU overload alarm clear threshold. CPU overload alarm clear threshold should be lower than CPU overload alarm issue threshold. The default one will be 60% CPU… |
| 1.3.6.1.4.1.890.1.5.13.13.20.3 | ScalarcoaConfSampleSeconds | read-write | current | Sample seconds of cpu overload alarm. The default sample rate is 35 seconds |
| 1.3.6.1.4.1.890.1.5.13.13.20.4 | ScalarcoaConfAnalyticMethod | read-write | current | Analytic method of cpu overload alarm. 'continous(1)' is the default value. |
| 1.3.6.1.4.1.890.1.5.13.13.23 | Nodeperformance | |||
| 1.3.6.1.4.1.890.1.5.13.13.24 | NodeifXExt | |||
| 1.3.6.1.4.1.890.1.5.13.13.24.8 | TableifXExtTable | not-accessible | current | A table extends IfXTable. |
| 1.3.6.1.4.1.890.1.5.13.13.24.8.1 | RowifXExtEntry | not-accessible | current | An entry to extend IfXEntry and ifIndex could be 1..24. |
| 1.3.6.1.4.1.890.1.5.13.13.24.8.1.1 | ColumnifXExtHCInError | read-only | current | Count of error packet received on specified ifterface indexed by ifIndex. |
| 1.3.6.1.4.1.890.1.5.13.13.24.8.1.2 | ColumnifXExtHCInDrop | read-only | current | Count of received packet dropped by specified ifterface indexed by ifIndex. |
| 1.3.6.1.4.1.890.1.5.13.13.24.8.1.3 | ColumnifXExtHCOutError | read-only | current | Count of error packet transmitted on specified ifterface indexed by ifIndex. |
| 1.3.6.1.4.1.890.1.5.13.13.24.8.1.4 | ColumnifXExtHCOutDrop | read-only | current | Count of transmitted packet dropped on specified ifterface indexed by ifIndex. |
| 1.3.6.1.4.1.890.1.5.13.13.25 | NodegbondExt | |||
| 1.3.6.1.4.1.890.1.5.13.13.25.1 | TablegBondPortStatExtTable | not-accessible | current | An extended table of gBondPortStatTable. |
| 1.3.6.1.4.1.890.1.5.13.13.25.1.1 | RowgBondPortStatExtEntry | not-accessible | current | An extended table of gBondPortStatEntry. ifIndex is 101..148. |
| 1.3.6.1.4.1.890.1.5.13.13.25.1.1.1 | ColumngBondPortStatExtStatus | read-only | current | The current connection status of the G.Bond port. |
| 1.3.6.1.4.1.890.1.5.13.13.25.1.1.2 | ColumngBondPortStatExtLastSerialNum | read-only | current | Last serial bumber is the first 5 bytes of Discovery Code of last connected G.Bond port (GBS). If last G.Bond port do not exist, would return all-zero. |
| 1.3.6.1.4.1.890.1.5.13.13.25.2 | NodegBondTemplate | |||
| 1.3.6.1.4.1.890.1.5.13.13.25.2.1 | TablegBondTemplateTable | not-accessible | current | Table of G.Bond template configuration derived from gBondPortConfTable |
| 1.3.6.1.4.1.890.1.5.13.13.25.2.1.1 | RowgBondTemplateEntry | not-accessible | current | An entry of G.Bond template configuration derived from gBondPortConfEntry. |
| 1.3.6.1.4.1.890.1.5.13.13.25.2.1.1.1 | ColumngBondTemplateName | read-only | current | G.Bond template name. |
| 1.3.6.1.4.1.890.1.5.13.13.25.2.1.1.7 | ColumngBondTemplateThreshLowUpRate | read-create | current | This object configures the G.Bond port low upstream rate crossing alarm threshold. When the current value of gBondPortStatUpDataRate for this port reaches/drop… |
| 1.3.6.1.4.1.890.1.5.13.13.25.2.1.1.8 | ColumngBondTemplateThreshLowDnRate | read-create | current | This object configures the G.Bond port low downstream rate crossing alarm threshold. When the current value of gBondPortStatDnDataRate for this port reaches/dr… |
| 1.3.6.1.4.1.890.1.5.13.13.25.2.1.1.9 | ColumngBondTemplateLowRateCrossingEnable | read-create | current | Indicates whether gBondLowUpRateCrossing and gBondLowDnRateCrossing notifications should be generated for this interface. Value of true(1) indicates that the n… |
| 1.3.6.1.4.1.890.1.5.13.13.25.2.1.1.10 | ColumngBondTemplatePmTcaConfProfile | read-create | current | The value of this object is the index of the row in the GBS port Alarm Configuration Profile Table for Performance Monitoring Threshold Crossing Alerts - gBond… |
| 1.3.6.1.4.1.890.1.5.13.13.25.2.1.1.11 | ColumngBondTemplatePmTcaEnable | read-create | current | Indicates whether gBondPerfTca*Crossing set of notifications should be generated for this interface. Value of true(1) indicates that the notifications are enab… |
| 1.3.6.1.4.1.890.1.5.13.13.25.2.1.1.12 | ColumngBondTemplateRowStatus | read-create | current | Row status of the table entry. |
| 1.3.6.1.4.1.890.1.5.13.13.25.2.3 | NodegBondTemplateOps | |||
| 1.3.6.1.4.1.890.1.5.13.13.25.2.3.1 | ScalartemplateName | read-write | current | Select G.Bond template to be copied. |
| 1.3.6.1.4.1.890.1.5.13.13.25.2.3.2 | ScalargBondTarget | read-write | current | The target G.Bond interface 101..148 to copy template settings to. |
| 1.3.6.1.4.1.890.1.5.13.13.25.2.3.3 | ScalargBondOperation | read-write | current | Copy the specified G.Bond template to G.Bond target interfaces. The value will return to '0' when clear operation has done. |
| 1.3.6.1.4.1.890.1.5.13.13.26 | Nodeies5206Conformance | |||
| 1.3.6.1.4.1.890.1.5.13.13.27 | Nodedot3ad | |||
| 1.3.6.1.4.1.890.1.5.13.13.27.1 | Tabledot3adTable | not-accessible | current | The table contains 802.3ad configuration. |
| 1.3.6.1.4.1.890.1.5.13.13.27.1.1 | Rowdot3adEntry | not-accessible | current | |
| 1.3.6.1.4.1.890.1.5.13.13.27.1.1.1 | Columndot3adGroupId | read-only | current | Group ID of 802.3ad function. |
| 1.3.6.1.4.1.890.1.5.13.13.27.1.1.2 | Columndot3adEnable | read-write | current | Enable/disable 802.3ad function. |
| 1.3.6.1.4.1.890.1.5.13.13.27.1.1.4 | Columndot3adGroupPortList | read-write | current | The port list which joins the trunking group. |
| 1.3.6.1.4.1.890.1.5.13.13.27.2 | ScalarlacpPriority | read-write | current | LACP system priority. |
| 1.3.6.1.4.1.890.1.5.13.13.27.3 | ScalarlacpTimeout | read-write | current | The time interval to exchange LACP packets in order to check that the peer port in the trunk group is still up. shorttimeout : 1-sec timeout longtimeout : 30-s… |
| 1.3.6.1.4.1.890.1.5.13.13.27.4 | Tabledot3adStatusTable | not-accessible | current | The table contains 802.3ad status. |
| 1.3.6.1.4.1.890.1.5.13.13.27.4.1 | Rowdot3adStatusEntry | not-accessible | current | |
| 1.3.6.1.4.1.890.1.5.13.13.27.4.1.1 | Columndot3adStatusGroupId | read-only | current | The dot3ad status group ID. |
| 1.3.6.1.4.1.890.1.5.13.13.27.4.1.2 | Columndot3adStatusActor | read-only | current | The dot3ad status of actor |
| 1.3.6.1.4.1.890.1.5.13.13.27.4.1.3 | Columndot3adStatusActorPriority | read-only | current | The dot3ad status of actor priority. |
| 1.3.6.1.4.1.890.1.5.13.13.27.4.1.4 | Columndot3adStatusActorKey | read-only | current | The dot3ad status of actor key. |
| 1.3.6.1.4.1.890.1.5.13.13.27.4.1.5 | Columndot3adStatusPartner | read-only | current | The dot3ad status of remote system of trunking group. |
| 1.3.6.1.4.1.890.1.5.13.13.27.4.1.6 | Columndot3adStatusPartnerPriority | read-only | current | The dot3ad status of partner priority. |
| 1.3.6.1.4.1.890.1.5.13.13.27.4.1.7 | Columndot3adStatusPartnerKey | read-only | current | The dot3ad status of partner key. |
| 1.3.6.1.4.1.890.1.5.13.13.27.4.1.8 | Columndot3adStatusLinks | read-only | current | The ot3ad status of links port. |
| 1.3.6.1.4.1.890.1.5.13.13.27.4.1.9 | Columndot3adStatusSyncs | read-only | current | The ot3ad status of synchronization state. |
| 1.3.6.1.4.1.890.1.5.13.13.29 | Nodesyslog | |||
| 1.3.6.1.4.1.890.1.5.13.13.29.2 | TablesyslogServerIpTable | not-accessible | current | Sets the IP addresses of Syslog managers (stations to send your Syslog message to). You can configure up to four managers. |
| 1.3.6.1.4.1.890.1.5.13.13.29.2.1 | RowsyslogServerIpEntry | not-accessible | current | |
| 1.3.6.1.4.1.890.1.5.13.13.29.2.1.1 | ColumnsyslogServerIpIndex | read-only | current | Index of Syslog servers |
| 1.3.6.1.4.1.890.1.5.13.13.29.2.1.2 | ColumnsyslogServerIpAddressType | read-write | current | Syslog server IP address type |
| 1.3.6.1.4.1.890.1.5.13.13.29.2.1.3 | ColumnsyslogServerIpAddress | read-write | current | Syslog server IP address <ipv4-address> 0.0.0.0 ~ 223.255.255.255 <ipv6-address> :: ~ ffff:ffff:ffff:ffff:ffff:ffff:ffff:ffff Limit: syslogServerIpAddressType … |
| 1.3.6.1.4.1.890.1.5.13.13.29.2.1.4 | ColumnsyslogServerIPSeverity | read-write | current | Severity of Syslog server SyslogServerIpAddress set to default value 0.0.0.0, severity will auto set to none |
| 1.3.6.1.4.1.890.1.5.13.13.30 | Nodecfm | |||
| 1.3.6.1.4.1.890.1.5.13.13.30.1 | TablecfmLoopbackPortTable | not-accessible | current | A table that contains CFM information. This table is supported by R5.02 and later versions. |
| 1.3.6.1.4.1.890.1.5.13.13.30.1.1 | RowcfmLoopbackPortEntry | not-accessible | current | An entry in cfmLoopbackPortTable. |
| 1.3.6.1.4.1.890.1.5.13.13.30.1.1.1 | ColumncfmLoopbackPortState | read-write | current | CFM loopback enable/disable on the port. |
| 1.3.6.1.4.1.890.1.5.13.13.30.2 | TablecfmMIPTable | not-accessible | current | |
| 1.3.6.1.4.1.890.1.5.13.13.30.2.1 | RowcfmMIPEntry | not-accessible | current | An entry in cfmMIPTable. |
| 1.3.6.1.4.1.890.1.5.13.13.30.2.1.1 | ColumncfmLevel | read-only | current | |
| 1.3.6.1.4.1.890.1.5.13.13.30.2.1.2 | ColumncfmVlanID | read-only | current | |
| 1.3.6.1.4.1.890.1.5.13.13.30.2.1.3 | ColumncfmPort | read-only | current | |
| 1.3.6.1.4.1.890.1.5.13.13.30.2.1.4 | ColumncfmMIPRowStatus | read-create | current | |
| 1.3.6.1.4.1.890.1.5.13.13.30.2.1.5 | ColumncfmMIPMacAddress | read-create | current | MAC address of maintenance domain intermediate point |
| 1.3.6.1.4.1.890.1.5.13.13.30.3 | ScalarcfmActionEnableStatus | read-write | current | CFM Action enable status for the CO device |
| 1.3.6.1.4.1.890.1.5.13.13.30.4 | ScalarcfmMode | read-write | current | The compliant CFM standard |
| 1.3.6.1.4.1.890.1.5.13.13.30.5 | ScalarcfmMIPRespondMcastLbm | read-write | current | The status indicate whether a MIP respond to mulcast lbms or not. |
| 1.3.6.1.4.1.890.1.5.13.13.30.6 | ScalarcfmLoopbackTimeout | read-write | current | CFM loopback timeout value. |
| 1.3.6.1.4.1.890.1.5.13.13.30.7 | TablecfmLbrTable | not-accessible | current | This table contains a list of Loopback replies received by a specific MEP in response to a loopback message. |
| 1.3.6.1.4.1.890.1.5.13.13.30.7.1 | RowcfmLbrEntry | not-accessible | current | The Loopback Reply table entry. |
| 1.3.6.1.4.1.890.1.5.13.13.30.7.1.1 | ColumncfmLbrSeqNumber | not-accessible | current | Transaction identifier/Sequence number returned by a previous transmit loopback message command, indicating which LBM's response is going to be returned. |
| 1.3.6.1.4.1.890.1.5.13.13.30.7.1.2 | ColumncfmLbrReceiveOrder | not-accessible | current | An index to distinguish among multiple LBRs with the same LBR Transaction Identifier field value. cfmLbrReceiveOrder are assigned sequentially from 1, in the o… |
| 1.3.6.1.4.1.890.1.5.13.13.30.7.1.3 | ColumncfmLbrSrcMac | read-only | current | Source MAC address returned in the LBR. |
| 1.3.6.1.4.1.890.1.5.13.13.31 | Nodegpon | |||
| 1.3.6.1.4.1.890.1.5.13.13.31.1 | NodeponTable | |||
| 1.3.6.1.4.1.890.1.5.13.13.31.1.1 | TableponSetupTable | not-accessible | current | |
| 1.3.6.1.4.1.890.1.5.13.13.31.1.1.1 | RowponSetupEntry | not-accessible | current | An entry in ponSetupTable |
| 1.3.6.1.4.1.890.1.5.13.13.31.1.1.1.1 | ColumntransceiverTxDisable | read-write | current | transceiver tx disable |
| 1.3.6.1.4.1.890.1.5.13.13.31.1.1.1.2 | ColumninO7State | read-write | current | ONT Enter Emergency Stop State(07), input serial number |
| 1.3.6.1.4.1.890.1.5.13.13.31.1.1.1.3 | ColumnoutO7State | read-write | current | ONT Leave Emergency Stop State(07), input serial number |
| 1.3.6.1.4.1.890.1.5.13.13.31.1.1.1.4 | ColumnlinkState | read-only | current | Show PON link state |
| 1.3.6.1.4.1.890.1.5.13.13.31.1.2 | TableponConfigTable | not-accessible | current | |
| 1.3.6.1.4.1.890.1.5.13.13.31.1.2.1 | RowponConfigEntry | not-accessible | current | An entry in ponConfigTable |
| 1.3.6.1.4.1.890.1.5.13.13.31.1.2.1.1 | ColumntransceiverType | read-write | current | transceiver Type |
| 1.3.6.1.4.1.890.1.5.13.13.31.1.2.1.2 | ColumnregisterMethod | read-write | current | register Method |
| 1.3.6.1.4.1.890.1.5.13.13.31.1.2.1.3 | ColumnponConfigRowStatus | read-create | current | |
| 1.3.6.1.4.1.890.1.5.13.13.31.1.2.1.4 | ColumntemplateOption | read-write | current | template-option |
| 1.3.6.1.4.1.890.1.5.13.13.31.1.2.1.5 | ColumndsFecMode | read-write | current | Enable/disable PON downstream FEC mode |
| 1.3.6.1.4.1.890.1.5.13.13.31.1.2.1.6 | ColumntcaFecCorrByteThres | read-write | current | TCA FEC corrected byte threshold |
| 1.3.6.1.4.1.890.1.5.13.13.31.1.2.1.7 | ColumntcaFecCorrCodeWordThres | read-write | current | TCA FEC corrected code word threshold |
| 1.3.6.1.4.1.890.1.5.13.13.31.1.2.1.8 | ColumntcaFecUncorrCodeWordThres | read-write | current | TCA FEC uncorrected code word threshold |
| 1.3.6.1.4.1.890.1.5.13.13.31.1.2.1.9 | ColumntcaBipErrThres | read-write | current | TCA BIP error threshold |
| 1.3.6.1.4.1.890.1.5.13.13.31.1.2.1.10 | ColumntcaReiCounterThres | read-write | current | TCA REI counter threshold |
| 1.3.6.1.4.1.890.1.5.13.13.31.1.2.1.12 | ColumnrangingMax | read-write | current | The maximum of PON ranging distance in km |
| 1.3.6.1.4.1.890.1.5.13.13.31.1.2.1.13 | ColumntcaFecCodeWordErrThres | read-write | current | TCA FEC code word threshold |
| 1.3.6.1.4.1.890.1.5.13.13.31.1.2.1.14 | ColumntcaBipByteThres | read-write | current | TCA BIP byte threshold |
| 1.3.6.1.4.1.890.1.5.13.13.31.1.2.1.15 | ColumntcaRxPloamCrcErrThres | read-write | current | TCA rx ploam crc error threshold |
| 1.3.6.1.4.1.890.1.5.13.13.31.1.2.1.16 | ColumntcaRxPloamNonIdleThres | read-write | current | TCA rx ploam non idle threshold |
| 1.3.6.1.4.1.890.1.5.13.13.31.1.2.1.17 | ColumntcaPositiveDriftThres | read-write | current | TCA positive drift threshold |
| 1.3.6.1.4.1.890.1.5.13.13.31.1.2.1.18 | ColumntcaNegativeDriftThres | read-write | current | TCA negative drift threshold |
| 1.3.6.1.4.1.890.1.5.13.13.31.1.2.1.19 | ColumntcaRxOmciPacketCrcErrThres | read-write | current | TCA rx omci crc error threshold |
| 1.3.6.1.4.1.890.1.5.13.13.31.1.2.1.20 | ColumntcaUnrecievedBurstThres | read-write | current | TCA unreceived burst threshold |
| 1.3.6.1.4.1.890.1.5.13.13.31.1.2.1.21 | ColumntcaLcdgiErrThres | read-write | current | TCA lcdgi error threshold |
| 1.3.6.1.4.1.890.1.5.13.13.31.1.2.1.22 | ColumntcaRdiErrThres | read-write | current | TCA rdi error threshold |
| 1.3.6.1.4.1.890.1.5.13.13.31.1.2.1.23 | ColumntcaRxOmciThres | read-write | current | TCA rx omci threshold |
| 1.3.6.1.4.1.890.1.5.13.13.31.1.2.1.24 | ColumntmplateAction | read-write | current | Enable or disable the ONT template action of the PON port. |
| 1.3.6.1.4.1.890.1.5.13.13.31.1.3 | TableunregisterOntTable | not-accessible | current | |
| 1.3.6.1.4.1.890.1.5.13.13.31.1.3.1 | RowunregisterOntEntry | not-accessible | current | An entry in unregisterOntTable |
| 1.3.6.1.4.1.890.1.5.13.13.31.1.3.1.1 | ColumnunregisterOntSerialNumber | read-only | current | unregisterOnt Serial Number |
| 1.3.6.1.4.1.890.1.5.13.13.31.1.3.1.2 | ColumnunregisterOntPassword | read-only | current | unregisterOnt password |
| 1.3.6.1.4.1.890.1.5.13.13.31.1.3.1.3 | ColumnunregisterOntStatus | read-only | current | unregisterOnt Status |
| 1.3.6.1.4.1.890.1.5.13.13.31.1.3.1.4 | ColumnunregisterOntIndex | read-only | current | unregisterOnt Ont Index |
| 1.3.6.1.4.1.890.1.5.13.13.31.1.4 | TableponProtectionTable | not-accessible | current | |
| 1.3.6.1.4.1.890.1.5.13.13.31.1.4.1 | RowponProtectionEntry | not-accessible | current | An entry in ponProtectionTable |
| 1.3.6.1.4.1.890.1.5.13.13.31.1.4.1.1 | ColumnpassivePort | not-accessible | current | The passive port of this protection pair. |
| 1.3.6.1.4.1.890.1.5.13.13.31.1.4.1.2 | ColumncurrWorkingPort | read-only | current | The current working port. System is trying to bring up ONU at this port. |
| 1.3.6.1.4.1.890.1.5.13.13.31.1.4.1.3 | ColumncurrStandbyPort | read-only | current | The current standby port. After a switch-over event occurs, it will be the next working port. |
| 1.3.6.1.4.1.890.1.5.13.13.31.1.4.1.4 | ColumndelimiterDetectedOnStandbyPort | read-only | current | It indicates whether the current standby port can detect delimiter on the PON fiber. true(1) indicates at least one delimiter is detected when user query this … |
| 1.3.6.1.4.1.890.1.5.13.13.31.1.4.1.5 | ColumnlastSwitchOverReason | read-only | current | It indicates the reason causes the last switch-over event. noData(0) indicates no switch-over event happened. lossOfSignal(1) indicates LOS happened on the wor… |
| 1.3.6.1.4.1.890.1.5.13.13.31.1.4.1.6 | ColumnlastSwitchOverTimeStampYear | read-only | current | It indicates the year the last switch-over event happened. |
| 1.3.6.1.4.1.890.1.5.13.13.31.1.4.1.7 | ColumnlastSwitchOverTimeStampMonth | read-only | current | It indicates the month the last switch-over event happened. |
| 1.3.6.1.4.1.890.1.5.13.13.31.1.4.1.8 | ColumnlastSwitchOverTimeStampDay | read-only | current | It indicates the day the last switch-over event happened. |
| 1.3.6.1.4.1.890.1.5.13.13.31.1.4.1.9 | ColumnlastSwitchOverTimeStampHour | read-only | current | It indicates the hour the last switch-over event happened. |
| 1.3.6.1.4.1.890.1.5.13.13.31.1.4.1.10 | ColumnlastSwitchOverTimeStampMinute | read-only | current | It indicates the minute the last switch-over event happened. |
| 1.3.6.1.4.1.890.1.5.13.13.31.1.4.1.11 | ColumnlastSwitchOverTimeStampSecond | read-only | current | It indicates the second the last switch-over event happened. |
| 1.3.6.1.4.1.890.1.5.13.13.31.1.4.1.12 | ColumnswitchOverTimes | read-only | current | It indicates the times of switch-over event happened since the protection pair was activated. |
| 1.3.6.1.4.1.890.1.5.13.13.31.1.4.1.13 | ColumnprotectSwitchPonRowstatus | read-create | current | Row Status for a protection pair. |
| 1.3.6.1.4.1.890.1.5.13.13.31.1.5 | TableponRogueOnuTable | not-accessible | current | |
| 1.3.6.1.4.1.890.1.5.13.13.31.1.5.1 | RowponRogueOnuEntry | not-accessible | current | An entry in ponRogueOnuTable |
| 1.3.6.1.4.1.890.1.5.13.13.31.1.5.1.1 | ColumnrogueDetect | read-write | current | Start or Stop rogue onu detect |
| 1.3.6.1.4.1.890.1.5.13.13.31.1.6 | NodeponPortBridge | |||
| 1.3.6.1.4.1.890.1.5.13.13.31.1.6.1 | ScalarponPortBridgeState | read-write | current | |
| 1.3.6.1.4.1.890.1.5.13.13.31.1.6.2 | TableponPortBridgePortTable | not-accessible | current | |
| 1.3.6.1.4.1.890.1.5.13.13.31.1.6.2.1 | RowponPortBridgePortEntry | not-accessible | current | An entry in portBridgePortTable. |
| 1.3.6.1.4.1.890.1.5.13.13.31.1.6.2.1.1 | ColumnponPortBridgePortState | read-write | current | Port Bridge enabled/disabled on the port. Enable(1) means local switching is allowed in this port. |
| 1.3.6.1.4.1.890.1.5.13.13.31.1.7 | NodeponAntiSpoof | |||
| 1.3.6.1.4.1.890.1.5.13.13.31.1.7.1 | TableponAntiSpoofPortTable | not-accessible | current | |
| 1.3.6.1.4.1.890.1.5.13.13.31.1.7.1.1 | RowponAntiSpoofPortEntry | not-accessible | current | An entry in ponAngiSpoofPortTable |
| 1.3.6.1.4.1.890.1.5.13.13.31.1.7.1.1.1 | ColumnponAntiSpoofActiveByPort | read-write | current | Pon port anti-spoofing enabled/disabled on the port. enabled(1) means local switching is allowed in this port. |
| 1.3.6.1.4.1.890.1.5.13.13.31.1.7.2 | TableponAntiSpoofTable | not-accessible | current | |
| 1.3.6.1.4.1.890.1.5.13.13.31.1.7.2.1 | RowponAntiSpoofEntry | not-accessible | current | An entry in ponAngiSpoofTable |
| 1.3.6.1.4.1.890.1.5.13.13.31.1.7.2.1.2 | ColumnponAntiSpoofMode | read-only | current | Display the entry is inclusive/exclusive for IP/MAC/OUIMAC. |
| 1.3.6.1.4.1.890.1.5.13.13.31.1.7.2.1.3 | ColumnponAntiSpoofSetting | read-only | current | Display the IP/MAC/IP&MAC/OUI-MAC setting of the anti-spoofing. |
| 1.3.6.1.4.1.890.1.5.13.13.31.1.7.2.1.4 | ColumnponAntiSpoofRowStatus | read-create | current | Create or distory a anti-spoofing of a pon port. ex 1: create a inclusiveIp entry with ip 192.168.100.100 on port 1-1, then the key is 10001.1.255.255.255.255.… |
| 1.3.6.1.4.1.890.1.5.13.13.31.1.8 | NodeponIpsb | |||
| 1.3.6.1.4.1.890.1.5.13.13.31.1.8.1 | TableponIpsbSetupTable | not-accessible | current | |
| 1.3.6.1.4.1.890.1.5.13.13.31.1.8.1.1 | RowponIpsbSetupEntry | not-accessible | current | An entry in ponIpsbSetupTable |
| 1.3.6.1.4.1.890.1.5.13.13.31.1.8.1.1.1 | ColumnipsbSetupMac | read-only | current | |
| 1.3.6.1.4.1.890.1.5.13.13.31.1.8.1.1.2 | ColumnipsbSetupVid | read-only | current | |
| 1.3.6.1.4.1.890.1.5.13.13.31.1.8.1.1.3 | ColumnipsbSetupIp | read-write | current | |
| 1.3.6.1.4.1.890.1.5.13.13.31.1.8.1.1.4 | ColumnipsbSetupState | read-create | current | |
| 1.3.6.1.4.1.890.1.5.13.13.31.2 | Noderemote | |||
| 1.3.6.1.4.1.890.1.5.13.13.31.2.1 | NodeontSetup | |||
| 1.3.6.1.4.1.890.1.5.13.13.31.2.1.1 | TableontTable | not-accessible | current | |
| 1.3.6.1.4.1.890.1.5.13.13.31.2.1.1.1 | RowontEntry | not-accessible | current | An entry in ontTable |
| 1.3.6.1.4.1.890.1.5.13.13.31.2.1.1.1.1 | ColumnontNumber | read-only | current | ontNumber. |
| 1.3.6.1.4.1.890.1.5.13.13.31.2.1.1.1.4 | Columnpassword | read-write | current | password. |
| 1.3.6.1.4.1.890.1.5.13.13.31.2.1.1.1.5 | ColumnplanVersion | read-write | current | plan-version. |
| 1.3.6.1.4.1.890.1.5.13.13.31.2.1.1.1.6 | Columnsn | read-write | current | serial number. |
| 1.3.6.1.4.1.890.1.5.13.13.31.2.1.1.1.7 | ColumnloopbackConfig | read-write | current | enabled/disabled loopback on the port. |
| 1.3.6.1.4.1.890.1.5.13.13.31.2.1.1.1.8 | ColumnloopbackStatus | read-only | current | This entry display latest loopback test status of port while performing remote-ont loopback test. |
| 1.3.6.1.4.1.890.1.5.13.13.31.2.1.1.1.9 | Columnmodel | read-write | current | Model ID. |
| 1.3.6.1.4.1.890.1.5.13.13.31.2.1.1.1.10 | ColumnontRowStatus | read-create | current | |
| 1.3.6.1.4.1.890.1.5.13.13.31.2.1.1.1.11 | ColumnontAction | read-write | current | Setting this MIB with value below to request an action to occur for the ONU. 1 Reboot the ONU. 2 Perform a FW version check. If the current version mismatches … |
| 1.3.6.1.4.1.890.1.5.13.13.31.2.1.1.1.12 | ColumnalarmProfile | read-write | current | apply an alarm profile to configure remote ONT ddmi threshold. |
| 1.3.6.1.4.1.890.1.5.13.13.31.2.1.1.1.13 | ColumnfullBridg | read-write | current | full-bridge mode |
| 1.3.6.1.4.1.890.1.5.13.13.31.2.1.1.1.14 | ColumnantiMacSpoofing | read-write | current | anti-mac-spoofing active or inactive |
| 1.3.6.1.4.1.890.1.5.13.13.31.2.1.1.1.15 | ColumnusFecMode | read-write | current | Enable/disable ONU upstream FEC mode |
| 1.3.6.1.4.1.890.1.5.13.13.31.2.1.1.1.16 | ColumntemplateDescription | read-write | current | ONT template description |
| 1.3.6.1.4.1.890.1.5.13.13.31.2.1.2 | TableontBwGroupTable | not-accessible | current | |
| 1.3.6.1.4.1.890.1.5.13.13.31.2.1.2.1 | RowontBwGroupEntry | not-accessible | current | An entry in ontBwGroupTable |
| 1.3.6.1.4.1.890.1.5.13.13.31.2.1.2.1.1 | ColumnontBwGroupId | not-accessible | current | Bandwidth group means US T-CONT (Transmission container)and DS BW meter |
| 1.3.6.1.4.1.890.1.5.13.13.31.2.1.2.1.2 | ColumnontBwGroupUstype | read-write | current | US T-CONT type is characterized by the traffic flows. |
| 1.3.6.1.4.1.890.1.5.13.13.31.2.1.2.1.3 | ColumnontBwGroupUsbwprofname | read-write | current | Upstream bandwidth profile name. |
| 1.3.6.1.4.1.890.1.5.13.13.31.2.1.2.1.4 | ColumnontBwGroupDsbwprofname | read-write | current | Downstream bandwidth profile name. |
| 1.3.6.1.4.1.890.1.5.13.13.31.2.1.2.1.5 | ColumnontBwGroupRowStatus | read-create | current | |
| 1.3.6.1.4.1.890.1.5.13.13.31.2.1.3 | TableontFileTransferParamTable | not-accessible | current | |
| 1.3.6.1.4.1.890.1.5.13.13.31.2.1.3.1 | RowontFileTransferParamEntry | not-accessible | current | Entry in ontFileTransferParamTable |
| 1.3.6.1.4.1.890.1.5.13.13.31.2.1.3.1.1 | ColumnontFileTransferFileUri | read-write | current | The URL to be used in file transfer. For example: ftp://a.b.c/dir/config.xml |
| 1.3.6.1.4.1.890.1.5.13.13.31.2.1.3.1.2 | ColumnontFileTransferLocalFileName | read-write | current | The file name of the target file in the ONU. For example: config.xml |
| 1.3.6.1.4.1.890.1.5.13.13.31.2.1.3.1.3 | ColumnontFileTransferUserName | read-write | current | The user name to be used for the file transfer. |
| 1.3.6.1.4.1.890.1.5.13.13.31.2.1.3.1.4 | ColumnontFileTransferPassword | read-write | current | The password to be used for the file transfer. |
| 1.3.6.1.4.1.890.1.5.13.13.31.2.1.4 | NodeontFwUpgrade | |||
| 1.3.6.1.4.1.890.1.5.13.13.31.2.1.4.1 | NodeontFwUpgradeSetup | |||
| 1.3.6.1.4.1.890.1.5.13.13.31.2.1.4.1.1 | ScalarontImageVersion | read-write | current | ONT image version name. |
| 1.3.6.1.4.1.890.1.5.13.13.31.2.1.4.1.2 | ScalarreleaseOntImage | read-write | current | release ONT image from OLT. |
| 1.3.6.1.4.1.890.1.5.13.13.31.2.1.4.1.3 | ScalarnumOfOntInQueue | read-only | current | The number of ONTs in FW upgrade queue. |
| 1.3.6.1.4.1.890.1.5.13.13.31.2.1.4.2 | TableontFwUpgradeTable | not-accessible | current | |
| 1.3.6.1.4.1.890.1.5.13.13.31.2.1.4.2.1 | RowontFwUpgradeEntry | not-accessible | current | Entry in ontFwUpgradeTable |
| 1.3.6.1.4.1.890.1.5.13.13.31.2.1.4.2.1.1 | ColumnontFwUpgradeOntNumber | read-write | current | Action to start upgrading ONT firmware with specified ONT number 1~128 (the same to ontAction.upgradingFW); 0 means to upgrade all ONTs of a PON port. |
| 1.3.6.1.4.1.890.1.5.13.13.31.2.1.4.2.1.2 | ColumnontFwUpgradeClearStatusPerPon | read-write | current | Cleared all of the ONT upgrade status of the pon port. |
| 1.3.6.1.4.1.890.1.5.13.13.31.2.1.5 | TableontResetTable | not-accessible | current | |
| 1.3.6.1.4.1.890.1.5.13.13.31.2.1.5.1 | RowontResetEntry | not-accessible | current | An entry in ontResetTable1102 |
| 1.3.6.1.4.1.890.1.5.13.13.31.2.1.5.1.1 | ColumnontResetAction | read-write | current | ont Reset Action,Value 1: Load Factory Default,Value 2: Reset Default |
| 1.3.6.1.4.1.890.1.5.13.13.31.2.1.5.1.2 | ColumnontConfgurationStatus | read-write | current | ont Confguration Status.Value 0: In default state |
| 1.3.6.1.4.1.890.1.5.13.13.31.2.1.5.1.3 | ColumnontTimeOfRestore | read-write | current | Unix time seconds since midnight January 1,1970). |
| 1.3.6.1.4.1.890.1.5.13.13.31.2.1.6 | TableontWanConfigTable | not-accessible | current | |
| 1.3.6.1.4.1.890.1.5.13.13.31.2.1.6.1 | RowontWanConfigEntry | not-accessible | current | An entry in ontWanConfigTable |
| 1.3.6.1.4.1.890.1.5.13.13.31.2.1.6.1.1 | ColumnontWanConfigId | not-accessible | current | ont wan config wan id |
| 1.3.6.1.4.1.890.1.5.13.13.31.2.1.6.1.2 | ColumnontWanConfigVlan | read-write | current | ont wan vlan. |
| 1.3.6.1.4.1.890.1.5.13.13.31.2.1.6.1.3 | ColumnontWanConfigPriority | read-write | current | ont wan priority. |
| 1.3.6.1.4.1.890.1.5.13.13.31.2.1.6.1.4 | ColumnontWanConfigNat | read-write | current | ont wan nat config. |
| 1.3.6.1.4.1.890.1.5.13.13.31.2.1.6.1.5 | ColumnontWanConfigUsername | read-write | current | ont wan config user name. |
| 1.3.6.1.4.1.890.1.5.13.13.31.2.1.6.1.6 | ColumnontWanConfigPassword | read-write | current | ont wan config password. |
| 1.3.6.1.4.1.890.1.5.13.13.31.2.1.6.1.7 | ColumnontWanConfigRowStatus | read-create | current | |
| 1.3.6.1.4.1.890.1.5.13.13.31.2.2 | TableontcardTable | not-accessible | current | |
| 1.3.6.1.4.1.890.1.5.13.13.31.2.2.1 | RowontcardEntry | not-accessible | current | An entry in ontcardTable |
| 1.3.6.1.4.1.890.1.5.13.13.31.2.2.1.1 | Columnontcard | read-only | current | ontcard. |
| 1.3.6.1.4.1.890.1.5.13.13.31.2.2.1.2 | ColumnontcardType | read-write | current | cardtype. |
| 1.3.6.1.4.1.890.1.5.13.13.31.2.2.1.3 | Columnnumofport | read-write | current | numofport. |
| 1.3.6.1.4.1.890.1.5.13.13.31.2.2.1.4 | ColumnontcardRowStatus | read-create | current | |
| 1.3.6.1.4.1.890.1.5.13.13.31.2.2.1.5 | ColumnontcardAction | read-write | current | Delete all configurations relating to ontcard. |
| 1.3.6.1.4.1.890.1.5.13.13.31.2.3 | TableontenetTable | not-accessible | current | |
| 1.3.6.1.4.1.890.1.5.13.13.31.2.3.1 | RowontenetEntry | not-accessible | current | An entry in ontenetTable |
| 1.3.6.1.4.1.890.1.5.13.13.31.2.3.1.1 | ColumnontenetCardPort | not-accessible | current | ontenetCardPort. |
| 1.3.6.1.4.1.890.1.5.13.13.31.2.3.1.2 | ColumnpmenetEnable | read-write | current | pmenetEnable. |
| 1.3.6.1.4.1.890.1.5.13.13.31.2.3.1.3 | ColumnportSpeed | read-write | current | port-speed. |
| 1.3.6.1.4.1.890.1.5.13.13.31.2.3.1.4 | ColumnontenetRowStatus | read-create | current | |
| 1.3.6.1.4.1.890.1.5.13.13.31.2.3.1.5 | ColumnontenetAction | read-write | current | Delete all configurations relating to ontenet. |
| 1.3.6.1.4.1.890.1.5.13.13.31.2.4 | TableontvdslTable | not-accessible | current | |
| 1.3.6.1.4.1.890.1.5.13.13.31.2.4.1 | RowontvdslEntry | not-accessible | current | An entry in ontvdslTable |
| 1.3.6.1.4.1.890.1.5.13.13.31.2.4.1.1 | ColumnontvdslCardPort | not-accessible | current | ontvdslCardPort. |
| 1.3.6.1.4.1.890.1.5.13.13.31.2.4.1.2 | ColumnlineTemplate | read-write | current | line-template. |
| 1.3.6.1.4.1.890.1.5.13.13.31.2.4.1.3 | ColumnontvdslRowStatus | read-create | current | |
| 1.3.6.1.4.1.890.1.5.13.13.31.2.4.1.4 | ColumnontvdslAction | read-write | current | Delete all configurations relating to ontvdsl. |
| 1.3.6.1.4.1.890.1.5.13.13.31.2.5 | NodeontuniportSetup | |||
| 1.3.6.1.4.1.890.1.5.13.13.31.2.5.1 | TableontuniportTable | not-accessible | current | |
| 1.3.6.1.4.1.890.1.5.13.13.31.2.5.1.1 | RowontuniportEntry | not-accessible | current | An entry in ontuniportTable. |
| 1.3.6.1.4.1.890.1.5.13.13.31.2.5.1.1.1 | ColumnuniPort | read-only | current | uniport |
| 1.3.6.1.4.1.890.1.5.13.13.31.2.5.1.1.2 | ColumnuniPortRowStatus | read-create | current | |
| 1.3.6.1.4.1.890.1.5.13.13.31.2.5.1.1.3 | ColumnuniPortAction | read-write | current | Delete all configurations relating to uniport. |
| 1.3.6.1.4.1.890.1.5.13.13.31.2.5.1.1.4 | ColumnuniportMacLimit | read-write | current | maximum number of mac addresses can be learned per uniport. Zero value means mac-limit is inactive and no mac-address limitation. |
| 1.3.6.1.4.1.890.1.5.13.13.31.2.5.2 | TableuniportIgmpchannelTable | not-accessible | current | |
| 1.3.6.1.4.1.890.1.5.13.13.31.2.5.2.1 | RowuniportIgmpchannelEntry | not-accessible | current | An entry in igmpchannelTable. |
| 1.3.6.1.4.1.890.1.5.13.13.31.2.5.2.1.1 | ColumnuniportIgmpchannelUniSvid | read-only | current | uni-svid |
| 1.3.6.1.4.1.890.1.5.13.13.31.2.5.2.1.2 | ColumnuniportIgmpchannelUniCvid | read-only | current | uni-cvid |
| 1.3.6.1.4.1.890.1.5.13.13.31.2.5.2.1.3 | ColumnuniportIgmpchannelVersion | read-write | current | IGMP version |
| 1.3.6.1.4.1.890.1.5.13.13.31.2.5.2.1.4 | ColumnuniportIgmpchannelMaxgroup | read-write | current | Maximum number of groups. |
| 1.3.6.1.4.1.890.1.5.13.13.31.2.5.2.1.5 | ColumnuniportIgmpchannelMaxmsg | read-write | current | Maximum number of reports per second. |
| 1.3.6.1.4.1.890.1.5.13.13.31.2.5.2.1.10 | ColumnuniportIgmpchannelRowStatus | read-create | current | |
| 1.3.6.1.4.1.890.1.5.13.13.31.2.5.2.1.11 | ColumnuniportIgmpchannelTrafficTxTag | read-write | current | Traffic tag on UNI port. If replace(5) is set, then uniportIgmpchannelTrafficTxTagRepVid will be applied. |
| 1.3.6.1.4.1.890.1.5.13.13.31.2.5.2.1.12 | ColumnuniportIgmpchannelCacProf | read-write | current | The maximum multicast bandwidth for this channel |
| 1.3.6.1.4.1.890.1.5.13.13.31.2.5.2.1.13 | ColumnuniportIgmpchannelTrafficTxTagRepVid | read-write | current | Replaced downstream VID. It is applied only when uniportIgmpchannelTrafficTxTag is set to replace(5). |
| 1.3.6.1.4.1.890.1.5.13.13.31.2.5.2.1.14 | ColumnuniportIgmpchannelGroupPrivProf | read-only | current | The group privilege profile this channel wants to apply. If the group privilege profile is set, both previewPkg and fullviewPkg settings will be ignored. |
| 1.3.6.1.4.1.890.1.5.13.13.31.2.5.2.1.15 | ColumnuniportIgmpchannelMvlan | read-write | current | MVR receive port. It works only when group-privilege-profile is set, 0 means non-MVR. |
| 1.3.6.1.4.1.890.1.5.13.13.31.2.5.3 | TableuniportProtoBasedTable | not-accessible | current | |
| 1.3.6.1.4.1.890.1.5.13.13.31.2.5.3.1 | RowuniportProtoBasedEntry | not-accessible | current | An entry in protocol-basedTable. |
| 1.3.6.1.4.1.890.1.5.13.13.31.2.5.3.1.1 | ColumnuniportProtoBasedEtherType | not-accessible | current | ethernet Type. ipoe(1) pppoe(2) arp(3) ipv6(4) |
| 1.3.6.1.4.1.890.1.5.13.13.31.2.5.3.1.2 | ColumnuniportProtoBasedSvid | read-write | current | SVID |
| 1.3.6.1.4.1.890.1.5.13.13.31.2.5.3.1.3 | ColumnuniportProtoBasedCvid | read-write | current | CVID |
| 1.3.6.1.4.1.890.1.5.13.13.31.2.5.3.1.4 | ColumnuniportProtoBasedPriority | read-write | current | priority |
| 1.3.6.1.4.1.890.1.5.13.13.31.2.5.3.1.5 | ColumnuniportProtoBasedRowStatus | read-create | current | |
| 1.3.6.1.4.1.890.1.5.13.13.31.2.5.4 | TableuniportPvidTable | not-accessible | current | |
| 1.3.6.1.4.1.890.1.5.13.13.31.2.5.4.1 | RowuniportPvidEntry | not-accessible | current | An entry in pvidTable. |
| 1.3.6.1.4.1.890.1.5.13.13.31.2.5.4.1.1 | ColumnuniportPvidUniSvid | read-write | current | SVID |
| 1.3.6.1.4.1.890.1.5.13.13.31.2.5.4.1.2 | ColumnuniportPvidUniCvid | read-write | current | CVID |
| 1.3.6.1.4.1.890.1.5.13.13.31.2.5.4.1.3 | ColumnuniportPvidPriority | read-write | current | Pvid priority |
| 1.3.6.1.4.1.890.1.5.13.13.31.2.5.4.1.4 | ColumnuniportPvidRowStatus | read-create | current | |
| 1.3.6.1.4.1.890.1.5.13.13.31.2.5.5 | TableuniportQueueTable | not-accessible | current | |
| 1.3.6.1.4.1.890.1.5.13.13.31.2.5.5.1 | RowuniportQueueEntry | not-accessible | current | An entry in queueTable. |
| 1.3.6.1.4.1.890.1.5.13.13.31.2.5.5.1.1 | ColumnuniportQueueTc | not-accessible | current | traffic class 0-7 |
| 1.3.6.1.4.1.890.1.5.13.13.31.2.5.5.1.2 | ColumnuniportQueuePriority | read-write | current | Usqueue priority 0-7 |
| 1.3.6.1.4.1.890.1.5.13.13.31.2.5.5.1.3 | ColumnuniportQueueWeight | read-write | current | Usqueue weight 0-255 |
| 1.3.6.1.4.1.890.1.5.13.13.31.2.5.5.1.4 | ColumnuniportQueueUsbwprofname | read-write | current | usbwprof name |
| 1.3.6.1.4.1.890.1.5.13.13.31.2.5.5.1.5 | ColumnuniportQueueDsbwprofname | read-write | current | dsbwprof name |
| 1.3.6.1.4.1.890.1.5.13.13.31.2.5.5.1.6 | ColumnuniportQueueDsoption | read-write | current | queue ds option,do metering at OLT side or ONT side |
| 1.3.6.1.4.1.890.1.5.13.13.31.2.5.5.1.7 | ColumnuniportQueueUsbwsharegroupid | read-write | current | upstream bandwidth group id |
| 1.3.6.1.4.1.890.1.5.13.13.31.2.5.5.1.8 | ColumnuniportQueueRowStatus | read-create | current | |
| 1.3.6.1.4.1.890.1.5.13.13.31.2.5.5.1.9 | ColumnuniportQueueDsbwsharegroupid | read-write | current | downstream bandwidth group id |
| 1.3.6.1.4.1.890.1.5.13.13.31.2.5.6 | TableuniportVlanTable | not-accessible | current | |
| 1.3.6.1.4.1.890.1.5.13.13.31.2.5.6.1 | RowuniportVlanEntry | not-accessible | current | An entry in uniportVlanTable. |
| 1.3.6.1.4.1.890.1.5.13.13.31.2.5.6.1.1 | ColumnuniportVlanUniSvid | not-accessible | current | uni-svid |
| 1.3.6.1.4.1.890.1.5.13.13.31.2.5.6.1.2 | ColumnuniportVlanUniCvid | not-accessible | current | uni-cvid |
| 1.3.6.1.4.1.890.1.5.13.13.31.2.5.6.1.3 | ColumnuniportVlanNetworkSvid | read-write | current | network-svid |
| 1.3.6.1.4.1.890.1.5.13.13.31.2.5.6.1.4 | ColumnuniportVlanNetworkSpri | read-write | current | network-spri |
| 1.3.6.1.4.1.890.1.5.13.13.31.2.5.6.1.5 | ColumnuniportVlanNetworkCvid | read-write | current | network-cvid |
| 1.3.6.1.4.1.890.1.5.13.13.31.2.5.6.1.6 | ColumnuniportVlanIngProf | read-write | current | ingProf |
| 1.3.6.1.4.1.890.1.5.13.13.31.2.5.6.1.7 | ColumnuniportVlanGemPort | read-write | current | gemPort |
| 1.3.6.1.4.1.890.1.5.13.13.31.2.5.6.1.8 | ColumnuniportVlanTr156 | read-write | current | tr156 |
| 1.3.6.1.4.1.890.1.5.13.13.31.2.5.6.1.9 | ColumnuniportVlanTxTag | read-write | current | txtag |
| 1.3.6.1.4.1.890.1.5.13.13.31.2.5.6.1.10 | ColumnuniportVlanPbitProf | read-write | current | pbit profile |
| 1.3.6.1.4.1.890.1.5.13.13.31.2.5.6.1.11 | ColumnuniportVlanDscpToPbit | read-write | current | dscp to pbit active/inactive |
| 1.3.6.1.4.1.890.1.5.13.13.31.2.5.6.1.12 | ColumnuniportVlanAesEncrypt | read-write | current | AES encryption |
| 1.3.6.1.4.1.890.1.5.13.13.31.2.5.6.1.13 | ColumnuniportVlanRowStatus | read-create | current | |
| 1.3.6.1.4.1.890.1.5.13.13.31.2.5.6.1.14 | ColumnuniportVlanSharePriority | read-write | current | Share priority. Specify 8 to disable the priority. |
| 1.3.6.1.4.1.890.1.5.13.13.31.2.5.6.1.15 | ColumnuniportVlanMacNumber | read-write | current | MAC number. |
| 1.3.6.1.4.1.890.1.5.13.13.31.2.5.7 | TableuniportVoipTable | not-accessible | current | |
| 1.3.6.1.4.1.890.1.5.13.13.31.2.5.7.1 | RowuniportVoipEntry | not-accessible | current | An entry in uniportVoipTable. |
| 1.3.6.1.4.1.890.1.5.13.13.31.2.5.7.1.1 | ColumnuniportVoipMode | read-write | current | set ONT Voip mode. It just can be set to sip mode, now. |
| 1.3.6.1.4.1.890.1.5.13.13.31.2.5.7.1.2 | ColumnuniportVoipUniCvid | read-write | current | set ONT Voip vlan(1 ~ 4094). |
| 1.3.6.1.4.1.890.1.5.13.13.31.2.5.7.1.3 | ColumnuniportVoipCommProfName | read-write | current | set ONT Voip common profile name(1 ~ 15 characters). |
| 1.3.6.1.4.1.890.1.5.13.13.31.2.5.7.1.4 | ColumnuniportVoipSipProfName | read-write | current | set ONT Voip sip profile name(1 ~ 15 characters). |
| 1.3.6.1.4.1.890.1.5.13.13.31.2.5.7.1.5 | ColumnuniportVoipUsername | read-write | current | set ONT Voip user name(1 ~ 63 characters). |
| 1.3.6.1.4.1.890.1.5.13.13.31.2.5.7.1.6 | ColumnuniportVoipPassword | read-write | current | set ONT Voip password(1 ~ 63 characters). |
| 1.3.6.1.4.1.890.1.5.13.13.31.2.5.7.1.7 | ColumnuniportVoipDialPlanName | read-write | current | set ONT Voip network dial plan name(1 ~ 15 characters) |
| 1.3.6.1.4.1.890.1.5.13.13.31.2.5.7.1.8 | ColumnuniportVoipAor | read-write | current | set ONT Voip user part AOR(1 ~ 63 characters). |
| 1.3.6.1.4.1.890.1.5.13.13.31.2.5.7.1.9 | ColumnuniportVoipDispName | read-write | current | set ONT Voip sip display name(1 ~ 25 characters). |
| 1.3.6.1.4.1.890.1.5.13.13.31.2.5.7.1.10 | ColumnuniportVoipVmailUri | read-write | current | set ONT Voip voicemail server SIP URI(1 ~ 63 characters) |
| 1.3.6.1.4.1.890.1.5.13.13.31.2.5.7.1.11 | ColumnuniportVoipVmailExtimer | read-write | current | set ONT Voip voice subscription expiration time(0 ~ 3600) |
| 1.3.6.1.4.1.890.1.5.13.13.31.2.5.7.1.12 | ColumnuniportVoipReleaseTimer | read-write | current | set ONT Voip release timer( 0 ~ 30) |
| 1.3.6.1.4.1.890.1.5.13.13.31.2.5.7.1.13 | ColumnuniportVoipRohTimer | read-write | current | set ONT Voip ROH timer( 0 ~ 30) |
| 1.3.6.1.4.1.890.1.5.13.13.31.2.5.7.1.14 | ColumnuniportVoipRowStatus | read-create | current | |
| 1.3.6.1.4.1.890.1.5.13.13.31.2.5.8 | TableuniportOntCardTable | not-accessible | current | |
| 1.3.6.1.4.1.890.1.5.13.13.31.2.5.8.1 | RowuniportOntCardEntry | not-accessible | current | An entry in uniportOntCardTable. |
| 1.3.6.1.4.1.890.1.5.13.13.31.2.5.8.1.1 | ColumnuniportOntCardTypeActive | read-write | current | Activate/Inactivate ONT ENET/VEIP/POTS/VIDEO |
| 1.3.6.1.4.1.890.1.5.13.13.31.2.5.8.1.2 | ColumnuniportOntEnetVeipPmEnable | read-write | current | Enable/Disable PM counter of ONT ENET/VEIP |
| 1.3.6.1.4.1.890.1.5.13.13.31.2.5.8.1.3 | ColumnuniportOntEnetPortSpeed | read-write | current | Enable/Disable port speed of ONT ENET |
| 1.3.6.1.4.1.890.1.5.13.13.31.2.5.8.1.4 | ColumnuniportOntCardRowStatus | read-create | current | The row status of uniportOntCardTable |
| 1.3.6.1.4.1.890.1.5.13.13.31.2.6 | NodeontQos | |||
| 1.3.6.1.4.1.890.1.5.13.13.31.2.6.1 | TableingressProfileTable | not-accessible | current | |
| 1.3.6.1.4.1.890.1.5.13.13.31.2.6.1.1 | RowingressProfileEntry | not-accessible | current | An entry in ONT QoS ingress profile table. |
| 1.3.6.1.4.1.890.1.5.13.13.31.2.6.1.1.1 | ColumningressProfileName | read-only | current | ONT QoS Ingress Profile Name. |
| 1.3.6.1.4.1.890.1.5.13.13.31.2.6.1.1.2 | ColumningressProfileDot1p0tc | read-write | current | set traffic class mapping to 802.1P priority 0. |
| 1.3.6.1.4.1.890.1.5.13.13.31.2.6.1.1.3 | ColumningressProfileDot1p1tc | read-write | current | set traffic class mapping to 802.1P priority 1. |
| 1.3.6.1.4.1.890.1.5.13.13.31.2.6.1.1.4 | ColumningressProfileDot1p2tc | read-write | current | set traffic class mapping to 802.1P priority 2. |
| 1.3.6.1.4.1.890.1.5.13.13.31.2.6.1.1.5 | ColumningressProfileDot1p3tc | read-write | current | set traffic class mapping to 802.1P priority 3. |
| 1.3.6.1.4.1.890.1.5.13.13.31.2.6.1.1.6 | ColumningressProfileDot1p4tc | read-write | current | set traffic class mapping to 802.1P priority 4. |
| 1.3.6.1.4.1.890.1.5.13.13.31.2.6.1.1.7 | ColumningressProfileDot1p5tc | read-write | current | set traffic class mapping to 802.1P priority 5. |
| 1.3.6.1.4.1.890.1.5.13.13.31.2.6.1.1.8 | ColumningressProfileDot1p6tc | read-write | current | set traffic class mapping to 802.1P priority 6. |
| 1.3.6.1.4.1.890.1.5.13.13.31.2.6.1.1.9 | ColumningressProfileDot1p7tc | read-write | current | set traffic class mapping to 802.1P priority 7. |
| 1.3.6.1.4.1.890.1.5.13.13.31.2.6.1.1.10 | ColumningressProfileRowStatus | read-create | current | |
| 1.3.6.1.4.1.890.1.5.13.13.31.2.6.2 | TablepbitProfileTable | not-accessible | current | |
| 1.3.6.1.4.1.890.1.5.13.13.31.2.6.2.1 | RowpbitProfileEntry | not-accessible | current | An entry in ONT QoS pbit profile table. |
| 1.3.6.1.4.1.890.1.5.13.13.31.2.6.2.1.1 | ColumnpbitProfileName | read-only | current | ONT QoS pbit Profile Name. |
| 1.3.6.1.4.1.890.1.5.13.13.31.2.6.2.1.2 | ColumnpbitProfileP0to | read-write | current | set traffic class mapping to 802.1P priority 0. |
| 1.3.6.1.4.1.890.1.5.13.13.31.2.6.2.1.3 | ColumnpbitProfileP1to | read-write | current | set traffic class mapping to 802.1P priority 1. |
| 1.3.6.1.4.1.890.1.5.13.13.31.2.6.2.1.4 | ColumnpbitProfileP2to | read-write | current | set traffic class mapping to 802.1P priority 2. |
| 1.3.6.1.4.1.890.1.5.13.13.31.2.6.2.1.5 | ColumnpbitProfileP3to | read-write | current | set traffic class mapping to 802.1P priority 3. |
| 1.3.6.1.4.1.890.1.5.13.13.31.2.6.2.1.6 | ColumnpbitProfileP4to | read-write | current | set traffic class mapping to 802.1P priority 4. |
| 1.3.6.1.4.1.890.1.5.13.13.31.2.6.2.1.7 | ColumnpbitProfileP5to | read-write | current | set traffic class mapping to 802.1P priority 5. |
| 1.3.6.1.4.1.890.1.5.13.13.31.2.6.2.1.8 | ColumnpbitProfileP6to | read-write | current | set traffic class mapping to 802.1P priority 6. |
| 1.3.6.1.4.1.890.1.5.13.13.31.2.6.2.1.9 | ColumnpbitProfileP7to | read-write | current | set traffic class mapping to 802.1P priority 7. |
| 1.3.6.1.4.1.890.1.5.13.13.31.2.6.2.1.10 | ColumnpbitProfileRowStatus | read-create | current | |
| 1.3.6.1.4.1.890.1.5.13.13.31.2.6.3 | TablebwProfileTable | not-accessible | current | |
| 1.3.6.1.4.1.890.1.5.13.13.31.2.6.3.1 | RowbwProfileEntry | not-accessible | current | An entry in ONT QoS bandwidth profile table. |
| 1.3.6.1.4.1.890.1.5.13.13.31.2.6.3.1.1 | ColumnbwProfileName | read-only | current | ONT QoS Bandwidth Profile Name. |
| 1.3.6.1.4.1.890.1.5.13.13.31.2.6.3.1.2 | ColumnbwProfileSir | read-write | current | set SIR value. |
| 1.3.6.1.4.1.890.1.5.13.13.31.2.6.3.1.3 | ColumnbwProfileAir | read-write | current | set AIR value. |
| 1.3.6.1.4.1.890.1.5.13.13.31.2.6.3.1.4 | ColumnbwProfilePir | read-write | current | set PIR value. |
| 1.3.6.1.4.1.890.1.5.13.13.31.2.6.3.1.5 | ColumnbwProfileRowStatus | read-create | current | |
| 1.3.6.1.4.1.890.1.5.13.13.31.2.6.3.1.6 | ColumnbwProfileUstype | read-write | current | Modify the upstream type. US TCONT Type + | Type0 | Type1 | Type2 | Type3 | Type4 | Type5 | | | | | | | | + | | sir | | | | sir | + auto-correction + | when us… |
| 1.3.6.1.4.1.890.1.5.13.13.31.2.6.4 | TablecacProfileTable | not-accessible | current | |
| 1.3.6.1.4.1.890.1.5.13.13.31.2.6.4.1 | RowcacProfileEntry | not-accessible | current | An entry in ONT QoS CAC profile table. |
| 1.3.6.1.4.1.890.1.5.13.13.31.2.6.4.1.1 | ColumncacProfileName | read-only | current | ONT QoS CAC profile name |
| 1.3.6.1.4.1.890.1.5.13.13.31.2.6.4.1.2 | ColumncacProfileMcastBw | read-write | current | set multicast bandwidth in kbps |
| 1.3.6.1.4.1.890.1.5.13.13.31.2.6.4.1.3 | ColumncacProfileRowStatus | read-create | current | |
| 1.3.6.1.4.1.890.1.5.13.13.31.2.6.5 | ScalargponQosWred | read-write | current | enable/disable gpon qos wred. |
| 1.3.6.1.4.1.890.1.5.13.13.31.2.6.6 | ScalargponQosDsMeter | read-write | current | gpon qos ds-meter. |
| 1.3.6.1.4.1.890.1.5.13.13.31.2.7 | TableontAlarmProfileTable | not-accessible | current | |
| 1.3.6.1.4.1.890.1.5.13.13.31.2.7.1 | RowontAlarmProfileEntry | not-accessible | current | An entry in ONT Alarm profile table for DDMI threshold setting. |
| 1.3.6.1.4.1.890.1.5.13.13.31.2.7.1.1 | ColumnontAlarmProfileName | read-only | current | ONT Alarm Profile Name. |
| 1.3.6.1.4.1.890.1.5.13.13.31.2.7.1.2 | ColumnontAlarmProfileFeedVoltThreshLow | read-write | current | set Lower Power Feed Voltage Threshold (unit V). The range of voltage is between 2.80 and 3.59 V. |
| 1.3.6.1.4.1.890.1.5.13.13.31.2.7.1.3 | ColumnontAlarmProfileFeedVoltThreshUp | read-write | current | set Upper Power Feed Voltage Threshold (unit V). The range of voltage is between 2.80 and 3.59 V. |
| 1.3.6.1.4.1.890.1.5.13.13.31.2.7.1.4 | ColumnontAlarmProfileBiasCurrThreshLow | read-write | current | set Lower Laser Bias Current Threshold (unit mA). The range of current is between 0 and 79 mA. |
| 1.3.6.1.4.1.890.1.5.13.13.31.2.7.1.5 | ColumnontAlarmProfileBiasCurrThreshUp | read-write | current | set Upper Laser Bias Current Threshold (unit mA). The range of current is between 0 and 79 mA. |
| 1.3.6.1.4.1.890.1.5.13.13.31.2.7.1.6 | ColumnontAlarmProfileTemperatureThreshLow | read-write | current | set Lower Temperature Threshold (unit degree C). The range of temperature is between -40 and 100 degree C. |
| 1.3.6.1.4.1.890.1.5.13.13.31.2.7.1.7 | ColumnontAlarmProfileTemperatureThreshUp | read-write | current | set Upper Temperature Threshold (unit degree C). The range of temperature is between -40 and 100 degree C. |
| 1.3.6.1.4.1.890.1.5.13.13.31.2.7.1.8 | ColumnontAlarmProfileTxPowerThreshLow | read-write | current | set Lower Transmit Power Threshold (unit dBm). The range of power is between -15.3 and 6.5 dBm. |
| 1.3.6.1.4.1.890.1.5.13.13.31.2.7.1.9 | ColumnontAlarmProfileTxPowerThreshUp | read-write | current | set Upper Transmit Power Threshold (unit dBm). The range of power is between -15.3 and 6.5 dBm. |
| 1.3.6.1.4.1.890.1.5.13.13.31.2.7.1.10 | ColumnontAlarmProfileRowStatus | read-create | current | |
| 1.3.6.1.4.1.890.1.5.13.13.31.2.7.1.11 | ColumnontAlarmProfileRxPowerThreshLow | read-write | current | set Lower Receive Power Threshold (unit dBm). The range of power is between -127 and 0 dBm. |
| 1.3.6.1.4.1.890.1.5.13.13.31.2.7.1.12 | ColumnontAlarmProfileRxPowerThreshUp | read-write | current | set Upper Receive Power Threshold (unit dBm). The range of power is between -127 and 0 dBm. |
| 1.3.6.1.4.1.890.1.5.13.13.31.2.8 | TableontvenetTable | not-accessible | current | |
| 1.3.6.1.4.1.890.1.5.13.13.31.2.8.1 | RowontvenetEntry | not-accessible | current | An entry in ontvenetTable |
| 1.3.6.1.4.1.890.1.5.13.13.31.2.8.1.1 | ColumnontvenetCardPort | not-accessible | current | ontvenetCardPort. |
| 1.3.6.1.4.1.890.1.5.13.13.31.2.8.1.2 | ColumnpmvenetEnable | read-write | current | pmvenetEnable. |
| 1.3.6.1.4.1.890.1.5.13.13.31.2.8.1.3 | ColumnontvenetRowStatus | read-create | current | |
| 1.3.6.1.4.1.890.1.5.13.13.31.2.8.1.4 | ColumnontvenetAction | read-write | current | Delete all configurations relating to ontvenet. |
| 1.3.6.1.4.1.890.1.5.13.13.31.2.9 | TableontpotsTable | not-accessible | current | |
| 1.3.6.1.4.1.890.1.5.13.13.31.2.9.1 | RowontpotsEntry | not-accessible | current | An entry in ontpotsTable |
| 1.3.6.1.4.1.890.1.5.13.13.31.2.9.1.1 | ColumnontpotsCardPort | not-accessible | current | ontpotsCardPort. |
| 1.3.6.1.4.1.890.1.5.13.13.31.2.9.1.2 | ColumnontpotsRowStatus | read-create | current | |
| 1.3.6.1.4.1.890.1.5.13.13.31.2.9.1.3 | ColumnontpotsAction | read-write | current | Delete all configurations relating to ontpots. |
| 1.3.6.1.4.1.890.1.5.13.13.31.2.10 | NodeontVoipProfile | |||
| 1.3.6.1.4.1.890.1.5.13.13.31.2.10.1 | TablesipProfileTable | not-accessible | current | |
| 1.3.6.1.4.1.890.1.5.13.13.31.2.10.1.1 | RowsipProfileEntry | not-accessible | current | An entry in ONT Voip sip profile table. |
| 1.3.6.1.4.1.890.1.5.13.13.31.2.10.1.1.1 | ColumnsipProfileName | read-only | current | ONT Voip sip profile name(1 ~ 15 characters). |
| 1.3.6.1.4.1.890.1.5.13.13.31.2.10.1.1.2 | ColumnsipProfileProxyServiceAddr | read-write | current | set ONT Voip proxy service address(1 ~ 63 characters). |
| 1.3.6.1.4.1.890.1.5.13.13.31.2.10.1.1.3 | ColumnsipProfileOutProxyAddr | read-write | current | set ONT Voip out proxy address(1 ~ 15 characters). |
| 1.3.6.1.4.1.890.1.5.13.13.31.2.10.1.1.4 | ColumnsipProfilePriDns | read-write | current | set ONT Voip primary sip dns(ip format). |
| 1.3.6.1.4.1.890.1.5.13.13.31.2.10.1.1.5 | ColumnsipProfileSecDns | read-write | current | set ONT Voip secondary sip dns(ip format). |
| 1.3.6.1.4.1.890.1.5.13.13.31.2.10.1.1.6 | ColumnsipProfileRegExpTime | read-write | current | set ONT Voip sip registration expiration time(0 ~ 25200 sec). |
| 1.3.6.1.4.1.890.1.5.13.13.31.2.10.1.1.7 | ColumnsipProfileReregHeadStartTime | read-write | current | set ONT Voip sip re-registration head start time(0 ~ 720 sec). |
| 1.3.6.1.4.1.890.1.5.13.13.31.2.10.1.1.8 | ColumnsipProfileHostPartUri | read-write | current | set ONT Voip host or domain part of the sip address(1 ~ 63 characters). |
| 1.3.6.1.4.1.890.1.5.13.13.31.2.10.1.1.9 | ColumnsipProfileRegistrar | read-write | current | set ONT Voip sip registrar address(1 ~ 63 characters). |
| 1.3.6.1.4.1.890.1.5.13.13.31.2.10.1.1.10 | ColumnsipProfileSoftSwitch | read-write | current | set ONT Voip sip gateway softswitch vendor. This format os four ASCII coded alphabetic characters[A..Z] as defined in ANSI T1.220(4 characters). |
| 1.3.6.1.4.1.890.1.5.13.13.31.2.10.1.1.11 | ColumnsipProfileCid | read-write | current | set ONT sip caller ID features. |
| 1.3.6.1.4.1.890.1.5.13.13.31.2.10.1.1.12 | ColumnsipProfileCallWait | read-write | current | set ONT sip call waiting feature. |
| 1.3.6.1.4.1.890.1.5.13.13.31.2.10.1.1.13 | ColumnsipProfileCallProgTrans | read-write | current | set ONT sip progress or transfer feature. |
| 1.3.6.1.4.1.890.1.5.13.13.31.2.10.1.1.14 | ColumnsipProfileCallPresent | read-write | current | set ONT sip call presentation feature. |
| 1.3.6.1.4.1.890.1.5.13.13.31.2.10.1.1.15 | ColumnsipProfileDirectCon | read-write | current | set ONT sip direct connect feature. |
| 1.3.6.1.4.1.890.1.5.13.13.31.2.10.1.1.16 | ColumnsipProfileDirectConUri | read-write | current | set ONT direct connect URI(1 ~ 63 characters). |
| 1.3.6.1.4.1.890.1.5.13.13.31.2.10.1.1.17 | ColumnsipProfileBridgeLineAgentUri | read-write | current | set ONT bridge line agent URI(1 ~ 63 characters). |
| 1.3.6.1.4.1.890.1.5.13.13.31.2.10.1.1.18 | ColumnsipProfileConfFactoryUri | read-write | current | set ONT conference factory URI(1 ~ 63 characters). |
| 1.3.6.1.4.1.890.1.5.13.13.31.2.10.1.1.19 | ColumnsipProfileRowStatus | read-create | current | |
| 1.3.6.1.4.1.890.1.5.13.13.31.2.10.2 | TablecommonProfileTable | not-accessible | current | |
| 1.3.6.1.4.1.890.1.5.13.13.31.2.10.2.1 | RowcommonProfileEntry | not-accessible | current | An entry in ONT Voip common profile table. |
| 1.3.6.1.4.1.890.1.5.13.13.31.2.10.2.1.1 | ColumncommonProfileName | read-only | current | ONT Voip common profile name(1 ~ 15 characters). |
| 1.3.6.1.4.1.890.1.5.13.13.31.2.10.2.1.2 | ColumncommonProfileLocalPortMin | read-write | current | set ONT Voip base RTP port(1 ~ 65535, but must smaller than highest RTP port). |
| 1.3.6.1.4.1.890.1.5.13.13.31.2.10.2.1.3 | ColumncommonProfileLocalPortMax | read-write | current | set ONT Voip highest RTP port(1 ~ 65535, but must bigger than highest RTP port). |
| 1.3.6.1.4.1.890.1.5.13.13.31.2.10.2.1.4 | ColumncommonProfileDscpMark | read-write | current | set ONT Voip diffserv code point to be used for utgoing RTP packets for this profile(0 ~ 63). |
| 1.3.6.1.4.1.890.1.5.13.13.31.2.10.2.1.5 | ColumncommonProfilePiggyback | read-write | current | set ONT Voip RTP piggyback events. |
| 1.3.6.1.4.1.890.1.5.13.13.31.2.10.2.1.6 | ColumncommonProfileTone | read-write | current | set ONT Voip handlin of tones via RTP tone events per RFC 4733. |
| 1.3.6.1.4.1.890.1.5.13.13.31.2.10.2.1.7 | ColumncommonProfileDtmf | read-write | current | set ONT Voip handling of DTMF via RTP DTMF events per RFC 4733. |
| 1.3.6.1.4.1.890.1.5.13.13.31.2.10.2.1.8 | ColumncommonProfileCas | read-write | current | set ONT Voip handling of CAS via RTP CAS events per RFC 4733. |
| 1.3.6.1.4.1.890.1.5.13.13.31.2.10.2.1.9 | ColumncommonProfileAnnounceType | read-write | current | set ONT Voip treatment when a subscriber goes off hook but dose not attempt a call. |
| 1.3.6.1.4.1.890.1.5.13.13.31.2.10.2.1.10 | ColumncommonProfileJitterTarget | read-write | current | set ONT Voip target value of the jitter buffer in milliseconds(0 ~ 500 milliseconds). |
| 1.3.6.1.4.1.890.1.5.13.13.31.2.10.2.1.11 | ColumncommonProfileJitterBufMax | read-write | current | set ONT Voip maximum depth of the jitter buffer associated with this service in milliseconds(0 ~ 5000 milliseconds). |
| 1.3.6.1.4.1.890.1.5.13.13.31.2.10.2.1.12 | ColumncommonProfileEchoCancel | read-write | current | set ONT Voip echo cancellation. |
| 1.3.6.1.4.1.890.1.5.13.13.31.2.10.2.1.13 | ColumncommonProfilePstnProtocol | read-write | current | set ONT Voip pstn protocol the value is equal to the E.164 country code. ex: taiwan is 886. |
| 1.3.6.1.4.1.890.1.5.13.13.31.2.10.2.1.14 | ColumncommonProfileFaxMode | read-write | current | set ONT Voip fax mode. |
| 1.3.6.1.4.1.890.1.5.13.13.31.2.10.2.1.15 | ColumncommonProfile1stCodec | read-write | current | set ONT Voip codec selection as defined by RFC 3551. |
| 1.3.6.1.4.1.890.1.5.13.13.31.2.10.2.1.16 | ColumncommonProfile2ndCodec | read-write | current | set ONT Voip codec selection as defined by RFC 3551. |
| 1.3.6.1.4.1.890.1.5.13.13.31.2.10.2.1.17 | ColumncommonProfile3rdCodec | read-write | current | set ONT Voip codec selection as defined by RFC 3551. |
| 1.3.6.1.4.1.890.1.5.13.13.31.2.10.2.1.18 | ColumncommonProfile4thCodec | read-write | current | set ONT Voip codec selection as defined by RFC 3551. |
| 1.3.6.1.4.1.890.1.5.13.13.31.2.10.2.1.19 | ColumncommonProfile1stPacketPeriod | read-write | current | set ONT Voip packet period selection interval in milliseconds(10 ~ 30 milliseconds). |
| 1.3.6.1.4.1.890.1.5.13.13.31.2.10.2.1.20 | ColumncommonProfile2ndPacketPeriod | read-write | current | set ONT Voip packet period selection interval in milliseconds(10 ~ 30 milliseconds). |
| 1.3.6.1.4.1.890.1.5.13.13.31.2.10.2.1.21 | ColumncommonProfile3rdPacketPeriod | read-write | current | set ONT Voip packet period selection interval in milliseconds(10 ~ 30 milliseconds). |
| 1.3.6.1.4.1.890.1.5.13.13.31.2.10.2.1.22 | ColumncommonProfile4thPacketPeriod | read-write | current | set ONT Voip packet period selection interval in milliseconds(10 ~ 30 milliseconds). |
| 1.3.6.1.4.1.890.1.5.13.13.31.2.10.2.1.23 | ColumncommonProfile1stSilence | read-write | current | set ONT Voip silence suppression. |
| 1.3.6.1.4.1.890.1.5.13.13.31.2.10.2.1.24 | ColumncommonProfile2ndSilence | read-write | current | set ONT Voip silence suppression. |
| 1.3.6.1.4.1.890.1.5.13.13.31.2.10.2.1.25 | ColumncommonProfile3rdSilence | read-write | current | set ONT Voip silence suppression. |
| 1.3.6.1.4.1.890.1.5.13.13.31.2.10.2.1.26 | ColumncommonProfile4thSilence | read-write | current | set ONT Voip silence suppression. |
| 1.3.6.1.4.1.890.1.5.13.13.31.2.10.2.1.27 | ColumncommonProfileOobDtmf | read-write | current | set ONT Voip out of band DTMF carriage. |
| 1.3.6.1.4.1.890.1.5.13.13.31.2.10.2.1.28 | ColumncommonProfileRowStatus | read-create | current | |
| 1.3.6.1.4.1.890.1.5.13.13.31.2.10.2.1.29 | ColumncommonProfileSignalCode | read-write | current | set ONT Voip signal conde. |
| 1.3.6.1.4.1.890.1.5.13.13.31.2.10.3 | NodedialPlan | |||
| 1.3.6.1.4.1.890.1.5.13.13.31.2.10.3.1 | TabledialPlanCommTable | not-accessible | current | |
| 1.3.6.1.4.1.890.1.5.13.13.31.2.10.3.1.1 | RowdialPlanCommEntry | not-accessible | current | An entry in ONT Voip network dial plan common table. |
| 1.3.6.1.4.1.890.1.5.13.13.31.2.10.3.1.1.1 | ColumndialPlanCommName | read-only | current | ONT Voip network dial plan Name(1 ~ 15 characters). |
| 1.3.6.1.4.1.890.1.5.13.13.31.2.10.3.1.1.2 | ColumndialPlanCommMaxSize | read-write | current | set ONT Voip maximum number of dial plans(1 ~ 256). |
| 1.3.6.1.4.1.890.1.5.13.13.31.2.10.3.1.1.3 | ColumndialPlanCommCriticalTimeout | read-write | current | set ONT Voip critical dial timeout for digit map processing in milliseconds(0 ~ 8000 milliseconds). |
| 1.3.6.1.4.1.890.1.5.13.13.31.2.10.3.1.1.4 | ColumndialPlanCommPartialTimeout | read-write | current | set ONT Voip partial dial timeout for digit map processing in milliseconds(0 ~ 32000 milliseconds). |
| 1.3.6.1.4.1.890.1.5.13.13.31.2.10.3.1.1.5 | ColumndialPlanCommFormat | read-write | current | set ONT Voip dial plan format standard that is supported in the ONT for Voip. |
| 1.3.6.1.4.1.890.1.5.13.13.31.2.10.3.1.1.6 | ColumndialPlanCommRowStatus | read-create | current | |
| 1.3.6.1.4.1.890.1.5.13.13.31.2.10.3.2 | TabledialPlanContTable | not-accessible | current | |
| 1.3.6.1.4.1.890.1.5.13.13.31.2.10.3.2.1 | RowdialPlanContEntry | not-accessible | current | An entry in ONT Voip network dial plan content table. |
| 1.3.6.1.4.1.890.1.5.13.13.31.2.10.3.2.1.1 | ColumndialPlanContName | read-only | current | ONT Voip network dial plan Name. When get or set this object, The value of the object will be parsed to ASCII on SNMPc application. |
| 1.3.6.1.4.1.890.1.5.13.13.31.2.10.3.2.1.2 | ColumndialPlanContId | read-only | current | set ONT Voip dial plans id(1 ~ 16). |
| 1.3.6.1.4.1.890.1.5.13.13.31.2.10.3.2.1.3 | ColumndialPlanContToken | read-write | current | set ONT Voip dial plan token(1 ~ 28 characters). When get or set this object, The value of the object will be parsed to ASCII on SNMPc application. |
| 1.3.6.1.4.1.890.1.5.13.13.31.2.10.3.2.1.4 | ColumndialPlanContRowStatus | read-create | current | |
| 1.3.6.1.4.1.890.1.5.13.13.31.2.11 | TableontvideoTable | not-accessible | current | |
| 1.3.6.1.4.1.890.1.5.13.13.31.2.11.1 | RowontvideoEntry | not-accessible | current | An entry in ontvideoTable |
| 1.3.6.1.4.1.890.1.5.13.13.31.2.11.1.1 | ColumnontvideoPort | not-accessible | current | ontvideoPort. |
| 1.3.6.1.4.1.890.1.5.13.13.31.2.11.1.2 | ColumnontvideoRowStatus | read-create | current | |
| 1.3.6.1.4.1.890.1.5.13.13.31.2.11.1.3 | ColumnontvideoAction | read-write | current | Delete all configurations relating to ontvideo. |
| 1.3.6.1.4.1.890.1.5.13.13.31.2.12 | TableonuModelTable | not-accessible | current | |
| 1.3.6.1.4.1.890.1.5.13.13.31.2.12.1 | RowonuModelEntry | not-accessible | current | An entry in ONU model table. |
| 1.3.6.1.4.1.890.1.5.13.13.31.2.12.1.1 | ColumnonuModelName | read-write | current | ONU model name. |
| 1.3.6.1.4.1.890.1.5.13.13.31.2.12.1.2 | ColumnonuModelID | read-write | current | ONU model ID. |
| 1.3.6.1.4.1.890.1.5.13.13.31.2.12.1.3 | ColumnonuModelVendorVersion | read-only | current | ONU model vendor version name. |
| 1.3.6.1.4.1.890.1.5.13.13.31.2.12.1.4 | ColumnonuModelSoftwareVersion | read-write | current | ONU model software version. |
| 1.3.6.1.4.1.890.1.5.13.13.31.2.12.1.5 | ColumnonuModelCard1 | read-write | current | ONU model GIGA Card entity ID. 0 means no this card. |
| 1.3.6.1.4.1.890.1.5.13.13.31.2.12.1.6 | ColumnonuModelCard2 | read-write | current | ONU model VEIP Card entity ID. 0 means no this card. |
| 1.3.6.1.4.1.890.1.5.13.13.31.2.12.1.7 | ColumnonuModelCard3 | read-write | current | ONU model POTS Card entity ID. 0 means no this card. |
| 1.3.6.1.4.1.890.1.5.13.13.31.2.12.1.8 | ColumnonuModelCard4 | read-write | current | ONU model VIDEO Card entity ID. 0 means no this card. |
| 1.3.6.1.4.1.890.1.5.13.13.31.2.12.1.9 | ColumnonuModelCard5 | read-write | current | ONU model 100M Card entity ID. 0 means no this card. |
| 1.3.6.1.4.1.890.1.5.13.13.31.2.12.1.10 | ColumnonuModelRowStatus | read-create | current | The status of specified ONU model entry. |
| 1.3.6.1.4.1.890.1.5.13.13.31.3 | NoderemoteInfo | |||
| 1.3.6.1.4.1.890.1.5.13.13.31.3.1 | TableponStatusTable | not-accessible | current | |
| 1.3.6.1.4.1.890.1.5.13.13.31.3.1.1 | RowponStatusEntry | not-accessible | current | An entry in ponStatusTable |
| 1.3.6.1.4.1.890.1.5.13.13.31.3.1.1.1 | Columnstate | read-only | current | state. |
| 1.3.6.1.4.1.890.1.5.13.13.31.3.1.1.2 | ColumnoltKeyExchange | read-only | current | pon keyExchange. |
| 1.3.6.1.4.1.890.1.5.13.13.31.3.1.1.3 | ColumnsnAcq | read-only | current | SNAcq. |
| 1.3.6.1.4.1.890.1.5.13.13.31.3.1.1.4 | ColumnrogueDectect | read-only | current | rogueDectect. |
| 1.3.6.1.4.1.890.1.5.13.13.31.3.1.1.5 | ColumnrogueDestructState | read-only | current | rogueDestructState. |
| 1.3.6.1.4.1.890.1.5.13.13.31.3.1.1.6 | ColumnprocInterval | read-only | current | procInterval. |
| 1.3.6.1.4.1.890.1.5.13.13.31.3.1.1.7 | ColumnprocIntervalSec | read-only | current | procIntervalSec. |
| 1.3.6.1.4.1.890.1.5.13.13.31.3.1.1.8 | Columnlos | read-only | current | LOS. |
| 1.3.6.1.4.1.890.1.5.13.13.31.3.1.1.9 | Columnlast | read-only | current | Last. |
| 1.3.6.1.4.1.890.1.5.13.13.31.3.1.1.10 | ColumnendOfBurstOffset | read-only | current | EndofBurstOffset. |
| 1.3.6.1.4.1.890.1.5.13.13.31.3.2 | NodeontStatusTable | |||
| 1.3.6.1.4.1.890.1.5.13.13.31.3.2.1 | TableontCurrentStatusTable | not-accessible | current | |
| 1.3.6.1.4.1.890.1.5.13.13.31.3.2.1.1 | RowontCurrentStatusEntry | not-accessible | current | An entry in ontCurrentStatusTable |
| 1.3.6.1.4.1.890.1.5.13.13.31.3.2.1.1.1 | ColumnserialNumber | read-only | current | Serial Number. |
| 1.3.6.1.4.1.890.1.5.13.13.31.3.2.1.1.2 | ColumnpasswordOnt | read-only | current | Ont password. |
| 1.3.6.1.4.1.890.1.5.13.13.31.3.2.1.1.3 | ColumnontStatus | read-only | current | ONT status. |
| 1.3.6.1.4.1.890.1.5.13.13.31.3.2.1.1.4 | ColumnversionA | read-only | current | versionA |
| 1.3.6.1.4.1.890.1.5.13.13.31.3.2.1.1.5 | ColumnversionB | read-only | current | versionB |
| 1.3.6.1.4.1.890.1.5.13.13.31.3.2.1.1.6 | ColumnactVersion | read-only | current | actVersion. |
| 1.3.6.1.4.1.890.1.5.13.13.31.3.2.1.1.7 | ColumnestimatedDistance | read-only | current | The estimated distance to the ONT. |
| 1.3.6.1.4.1.890.1.5.13.13.31.3.2.1.1.8 | ColumnpppoeStatus | read-only | current | This item reports the PPPoE session status of the ONT. |
| 1.3.6.1.4.1.890.1.5.13.13.31.3.2.1.1.9 | ColumnmodelVersion | read-only | current | This item indicates the model version reported by ONU. |
| 1.3.6.1.4.1.890.1.5.13.13.31.3.2.1.1.10 | ColumnwanIp | read-only | current | WAN IP address of this ONU. |
| 1.3.6.1.4.1.890.1.5.13.13.31.3.2.1.1.11 | ColumnupgradeStatus | read-only | current | The upgrade status of this ONU. 0. The upgrade status is idle. 1. The planned version of the ont and the action version of the ONT match. 2. The ONT start to d… |
| 1.3.6.1.4.1.890.1.5.13.13.31.3.2.3 | TableontBwGroupStatusTable | not-accessible | current | |
| 1.3.6.1.4.1.890.1.5.13.13.31.3.2.3.1 | RowontBwGroupStatusEntry | not-accessible | current | An entry in ontBwGroupStatusTable |
| 1.3.6.1.4.1.890.1.5.13.13.31.3.2.3.1.1 | ColumnontBwGroupStatusAllocId | read-only | current | This MIB reports the allocation ID assigned to this bandwidth group. |
| 1.3.6.1.4.1.890.1.5.13.13.31.3.2.4 | TableontCountersTable | not-accessible | current | ontCountersTable |
| 1.3.6.1.4.1.890.1.5.13.13.31.3.2.4.1 | RowontCountersEntry | not-accessible | current | An entry in ontCountersTable |
| 1.3.6.1.4.1.890.1.5.13.13.31.3.2.4.1.1 | ColumnontCountersUnreceivedBursts | read-only | current | Unreceived bursts. |
| 1.3.6.1.4.1.890.1.5.13.13.31.3.2.4.1.2 | ColumnontCountersPositiveDriftBits | read-only | current | Positive drift (bits). |
| 1.3.6.1.4.1.890.1.5.13.13.31.3.2.4.1.3 | ColumnontCountersNegativeDriftBits | read-only | current | Negative drift (bits). |
| 1.3.6.1.4.1.890.1.5.13.13.31.3.2.4.1.4 | ColumnontCountersBip8Errors | read-only | current | Bip8 errors. |
| 1.3.6.1.4.1.890.1.5.13.13.31.3.2.4.1.5 | ColumnontCountersCorrectedBytes | read-only | current | Corrected Bytes. |
| 1.3.6.1.4.1.890.1.5.13.13.31.3.2.4.1.6 | ColumnontCountersCorrectedCodewords | read-only | current | Corrected Codewords. |
| 1.3.6.1.4.1.890.1.5.13.13.31.3.2.4.1.7 | ColumnontCountersUncorrctableCodewords | read-only | current | Uncorrctable Codewords. |
| 1.3.6.1.4.1.890.1.5.13.13.31.3.2.4.1.8 | ColumnontCountersTotalReceivedCodewords | read-only | current | Total received Codewords. |
| 1.3.6.1.4.1.890.1.5.13.13.31.3.2.4.1.9 | ColumnontCountersDsBer | read-only | current | DS BER (REI). |
| 1.3.6.1.4.1.890.1.5.13.13.31.3.2.4.1.10 | ColumnontCountersBipByte | read-only | current | Bip byte. |
| 1.3.6.1.4.1.890.1.5.13.13.31.3.2.4.1.11 | ColumnontCountersRxPloamCrcErrors | read-only | current | Rx Ploam CrcErrors. |
| 1.3.6.1.4.1.890.1.5.13.13.31.3.2.4.1.12 | ColumnontCountersRxPloamNonidle | read-only | current | Rx Ploam non idle. |
| 1.3.6.1.4.1.890.1.5.13.13.31.3.2.4.1.13 | ColumnontCountersRxOmciPacketCrcErrors | read-only | current | Rx Omci Packet Crc Errors. |
| 1.3.6.1.4.1.890.1.5.13.13.31.3.2.4.1.14 | ColumnontCountersLcdgErrors | read-only | current | Lcdg errors. |
| 1.3.6.1.4.1.890.1.5.13.13.31.3.2.4.1.15 | ColumnontCountersRdiErrors | read-only | current | Rdi errors. |
| 1.3.6.1.4.1.890.1.5.13.13.31.3.2.4.1.16 | ColumnontCountersRxOmciPacket | read-only | current | Rx Omci Packet. |
| 1.3.6.1.4.1.890.1.5.13.13.31.3.2.5 | TableontWanStatusTable | not-accessible | current | |
| 1.3.6.1.4.1.890.1.5.13.13.31.3.2.5.1 | RowontWanStatusEntry | not-accessible | current | An entry in ontWanStatusTable |
| 1.3.6.1.4.1.890.1.5.13.13.31.3.2.5.1.1 | ColumnontWanId | not-accessible | current | ont wan Id |
| 1.3.6.1.4.1.890.1.5.13.13.31.3.2.5.1.2 | ColumnontWanStatusEnable | read-only | current | This MIB reports the wan status type. |
| 1.3.6.1.4.1.890.1.5.13.13.31.3.2.5.1.3 | ColumnontWanStatusType | read-only | current | This MIB reports the wan status type. |
| 1.3.6.1.4.1.890.1.5.13.13.31.3.2.5.1.4 | ColumnontWanStatusLinkStatus | read-only | current | This MIB reports the wan status. |
| 1.3.6.1.4.1.890.1.5.13.13.31.3.2.5.1.5 | ColumnontWanStatusServiceType | read-only | current | This MIB reports the wan status. |
| 1.3.6.1.4.1.890.1.5.13.13.31.3.2.5.1.6 | ColumnontWanStatusVlan | read-only | current | This MIB reports the wan vlan. |
| 1.3.6.1.4.1.890.1.5.13.13.31.3.2.5.1.7 | ColumnontWanStatusPriority | read-only | current | This MIB reports the wan proirity. |
| 1.3.6.1.4.1.890.1.5.13.13.31.3.2.5.1.8 | ColumnontWanStatusIpMode | read-only | current | This MIB reports the wan ip mode. |
| 1.3.6.1.4.1.890.1.5.13.13.31.3.2.5.1.9 | ColumnontWanStatusIp | read-only | current | This MIB reports the wan IP. |
| 1.3.6.1.4.1.890.1.5.13.13.31.3.2.5.1.10 | ColumnontWanStatusMask | read-only | current | This MIB reports the wan IP mask. |
| 1.3.6.1.4.1.890.1.5.13.13.31.3.2.5.1.11 | ColumnontWanStatusGateway | read-only | current | This MIB reports the wan IP gateway. |
| 1.3.6.1.4.1.890.1.5.13.13.31.3.2.5.1.12 | ColumnontWanStatusPrimaryDns | read-only | current | This MIB reports the wan primary dns. |
| 1.3.6.1.4.1.890.1.5.13.13.31.3.2.5.1.13 | ColumnontWanStatusSecondDns | read-only | current | This MIB reports the wan second dns. |
| 1.3.6.1.4.1.890.1.5.13.13.31.3.2.5.1.14 | ColumnontWanStatusNat | read-only | current | This MIB reports the wan nat status. |
| 1.3.6.1.4.1.890.1.5.13.13.31.3.3 | TableontCardStatusTable | not-accessible | current | |
| 1.3.6.1.4.1.890.1.5.13.13.31.3.3.1 | RowontCardStatusEntry | not-accessible | current | An entry in ontCardStatusTable |
| 1.3.6.1.4.1.890.1.5.13.13.31.3.3.1.1 | Columnstatus | read-only | current | ONT card status. |
| 1.3.6.1.4.1.890.1.5.13.13.31.3.3.1.2 | ColumnadminState | read-only | current | adminState. |
| 1.3.6.1.4.1.890.1.5.13.13.31.3.3.1.4 | ColumnexpectType | read-only | current | expectType. |
| 1.3.6.1.4.1.890.1.5.13.13.31.3.3.1.5 | ColumnactualType | read-only | current | actualType. |
| 1.3.6.1.4.1.890.1.5.13.13.31.3.3.1.6 | ColumnexpectedPort | read-only | current | expectedPort. |
| 1.3.6.1.4.1.890.1.5.13.13.31.3.3.1.7 | ColumnactualPort | read-only | current | actualPort. |
| 1.3.6.1.4.1.890.1.5.13.13.31.3.4 | TableontDdmiStatusTable | not-accessible | current | |
| 1.3.6.1.4.1.890.1.5.13.13.31.3.4.1 | RowontDdmiStatusEntry | not-accessible | current | An entry in ontDdmiStatusTable |
| 1.3.6.1.4.1.890.1.5.13.13.31.3.4.1.1 | Columnvoltage | read-only | current | ONT Voltage (V). |
| 1.3.6.1.4.1.890.1.5.13.13.31.3.4.1.2 | ColumnrxPower | read-only | current | ONT Rx power (dbm). |
| 1.3.6.1.4.1.890.1.5.13.13.31.3.4.1.3 | ColumntxPower | read-only | current | ONT Tx power (db). |
| 1.3.6.1.4.1.890.1.5.13.13.31.3.4.1.4 | ColumnlaserCurrent | read-only | current | ONT Laser Bias current (uA). |
| 1.3.6.1.4.1.890.1.5.13.13.31.3.4.1.5 | ColumnontTemperature | read-only | current | ONT Temperature (C). |
| 1.3.6.1.4.1.890.1.5.13.13.31.3.4.1.6 | ColumnontDdmiRowStatus | read-write | current | |
| 1.3.6.1.4.1.890.1.5.13.13.31.3.4.1.7 | ColumnontDdmiStatus | read-only | current | ontDdmiStatus. |
| 1.3.6.1.4.1.890.1.5.13.13.31.3.5 | NodeontEnetPmCounters | |||
| 1.3.6.1.4.1.890.1.5.13.13.31.3.5.1 | TableontEnetCurrentPmCountersTable | not-accessible | current | |
| 1.3.6.1.4.1.890.1.5.13.13.31.3.5.1.1 | RowontEnetCurrentPmCountersEntry | not-accessible | current | An entry in ontEnetPmCounters |
| 1.3.6.1.4.1.890.1.5.13.13.31.3.5.1.1.1 | ColumnontEnetCurrentPmUsOctets | read-only | current | ONT enet PM counters up stream octets. |
| 1.3.6.1.4.1.890.1.5.13.13.31.3.5.1.1.2 | ColumnontEnetCurrentPmUsPackets | read-only | current | ONT enet PM counters up stream packets. |
| 1.3.6.1.4.1.890.1.5.13.13.31.3.5.1.1.3 | ColumnontEnetCurrentPmUsMcastPackets | read-only | current | ONT enet PM counters up stream mcast packets. |
| 1.3.6.1.4.1.890.1.5.13.13.31.3.5.1.1.4 | ColumnontEnetCurrentPmUsBcastPackets | read-only | current | ONT enet PM counters up stream bcast packets. |
| 1.3.6.1.4.1.890.1.5.13.13.31.3.5.1.1.5 | ColumnontEnetCurrentPmDsOctets | read-only | current | ONT enet PM counters ds stream octets. |
| 1.3.6.1.4.1.890.1.5.13.13.31.3.5.1.1.6 | ColumnontEnetCurrentPmDsPackets | read-only | current | ONT enet PM counters ds stream packets. |
| 1.3.6.1.4.1.890.1.5.13.13.31.3.5.1.1.7 | ColumnontEnetCurrentPmDsMcastPackets | read-only | current | ONT enet PM counters ds stream mcast packets. |
| 1.3.6.1.4.1.890.1.5.13.13.31.3.5.1.1.8 | ColumnontEnetCurrentPmDsBcastPackets | read-only | current | ONT enet PM counters ds stream bcast packets. |
| 1.3.6.1.4.1.890.1.5.13.13.31.3.5.1.1.9 | ColumnontEnetPmCountersGetCurrent | read-write | current | |
| 1.3.6.1.4.1.890.1.5.13.13.31.3.5.1.1.10 | ColumnontEnetPmCountersCheckGetCurrent | read-only | current | |
| 1.3.6.1.4.1.890.1.5.13.13.31.3.5.2 | TableontEnetLast15PmCountersTable | not-accessible | current | |
| 1.3.6.1.4.1.890.1.5.13.13.31.3.5.2.1 | RowontEnetLast15PmCountersEntry | not-accessible | current | An entry in ontEnetPmCounters |
| 1.3.6.1.4.1.890.1.5.13.13.31.3.5.2.1.1 | ColumnontEnetLast15PmUsOctets | read-only | current | ONT enet PM counters up stream octets. |
| 1.3.6.1.4.1.890.1.5.13.13.31.3.5.2.1.2 | ColumnontEnetLast15PmUsPackets | read-only | current | ONT enet PM counters up stream packets. |
| 1.3.6.1.4.1.890.1.5.13.13.31.3.5.2.1.3 | ColumnontEnetLast15PmUsMcastPackets | read-only | current | ONT enet PM counters up stream mcast packets. |
| 1.3.6.1.4.1.890.1.5.13.13.31.3.5.2.1.4 | ColumnontEnetLast15PmUsBcastPackets | read-only | current | ONT enet PM counters up stream bcast packets. |
| 1.3.6.1.4.1.890.1.5.13.13.31.3.5.2.1.5 | ColumnontEnetLast15PmDsOctets | read-only | current | ONT enet PM counters ds stream octets. |
| 1.3.6.1.4.1.890.1.5.13.13.31.3.5.2.1.6 | ColumnontEnetLast15PmDsPackets | read-only | current | ONT enet PM counters ds stream packets. |
| 1.3.6.1.4.1.890.1.5.13.13.31.3.5.2.1.7 | ColumnontEnetLast15PmDsMcastPackets | read-only | current | ONT enet PM counters ds stream mcast packets. |
| 1.3.6.1.4.1.890.1.5.13.13.31.3.5.2.1.8 | ColumnontEnetLast15PmDsBcastPackets | read-only | current | ONT enet PM counters ds stream bcast packets. |
| 1.3.6.1.4.1.890.1.5.13.13.31.3.5.2.1.9 | ColumnontEnetLast15PmInterval | read-only | current | ONT enet PM counters Interval. |
| 1.3.6.1.4.1.890.1.5.13.13.31.3.6 | NodeontEnetStatus | |||
| 1.3.6.1.4.1.890.1.5.13.13.31.3.6.1 | TableontEnetStatusTable | not-accessible | current | |
| 1.3.6.1.4.1.890.1.5.13.13.31.3.6.1.1 | RowontEnetStatusEntry | not-accessible | current | An entry in ontEnetStatus |
| 1.3.6.1.4.1.890.1.5.13.13.31.3.6.1.1.1 | ColumnontEnetPortStatus | read-only | current | ONT enet ME provision status. |
| 1.3.6.1.4.1.890.1.5.13.13.31.3.7 | NodeontVenetPmCounters | |||
| 1.3.6.1.4.1.890.1.5.13.13.31.3.7.1 | TableontVenetCurrentPmCountersTable | not-accessible | current | |
| 1.3.6.1.4.1.890.1.5.13.13.31.3.7.1.1 | RowontVenetCurrentPmCountersEntry | not-accessible | current | An entry in ontVenetPmCounters |
| 1.3.6.1.4.1.890.1.5.13.13.31.3.7.1.1.1 | ColumnontVenetCurrentPmUsOctets | read-only | current | ONT venet PM counters Upstream Octets Cont. |
| 1.3.6.1.4.1.890.1.5.13.13.31.3.7.1.1.2 | ColumnontVenetCurrentPmUsPackets | read-only | current | ONT venet PM counters Upstream Packets Count. |
| 1.3.6.1.4.1.890.1.5.13.13.31.3.7.1.1.3 | ColumnontVenetCurrentPmUsMcastPackets | read-only | current | ONT venet PM counters Upstream Multicast Packets Count. |
| 1.3.6.1.4.1.890.1.5.13.13.31.3.7.1.1.4 | ColumnontVenetCurrentPmUsBcastPackets | read-only | current | ONT venet PM counters Upstream Broadcast Packets Count. |
| 1.3.6.1.4.1.890.1.5.13.13.31.3.7.1.1.5 | ColumnontVenetCurrentPmDsOctets | read-only | current | ONT venet PM counters Downstream Octets Cont. |
| 1.3.6.1.4.1.890.1.5.13.13.31.3.7.1.1.6 | ColumnontVenetCurrentPmDsPackets | read-only | current | ONT venet PM counters Downstream Packets Count. |
| 1.3.6.1.4.1.890.1.5.13.13.31.3.7.1.1.7 | ColumnontVenetCurrentPmDsMcastPackets | read-only | current | ONT venet PM counters Downstream Multicast Packets Count. |
| 1.3.6.1.4.1.890.1.5.13.13.31.3.7.1.1.8 | ColumnontVenetCurrentPmDsBcastPackets | read-only | current | ONT venet PM counters Downstream Broadcast Packets Count. |
| 1.3.6.1.4.1.890.1.5.13.13.31.3.7.1.1.9 | ColumnontVenetPmCountersGetCurrent | read-write | current | |
| 1.3.6.1.4.1.890.1.5.13.13.31.3.7.1.1.10 | ColumnontVenetPmCountersCheckGetCurrent | read-only | current | |
| 1.3.6.1.4.1.890.1.5.13.13.31.3.7.2 | TableontVenetLast15PmCountersTable | not-accessible | current | |
| 1.3.6.1.4.1.890.1.5.13.13.31.3.7.2.1 | RowontVenetLast15PmCountersEntry | not-accessible | current | An entry in ontVenetPmCounters |
| 1.3.6.1.4.1.890.1.5.13.13.31.3.7.2.1.1 | ColumnontVenetLast15PmUsOctets | read-only | current | ONT venet PM counters Upstream Octets Count. |
| 1.3.6.1.4.1.890.1.5.13.13.31.3.7.2.1.2 | ColumnontVenetLast15PmUsPackets | read-only | current | ONT venet PM counters Upstream Packets Count. |
| 1.3.6.1.4.1.890.1.5.13.13.31.3.7.2.1.3 | ColumnontVenetLast15PmUsMcastPackets | read-only | current | ONT venet PM counters Upstream Multicast Packets Count. |
| 1.3.6.1.4.1.890.1.5.13.13.31.3.7.2.1.4 | ColumnontVenetLast15PmUsBcastPackets | read-only | current | ONT venet PM counters Upstream Broadcast Packets Count. |
| 1.3.6.1.4.1.890.1.5.13.13.31.3.7.2.1.5 | ColumnontVenetLast15PmDsOctets | read-only | current | ONT venet PM counters Downstream Octets Count. |
| 1.3.6.1.4.1.890.1.5.13.13.31.3.7.2.1.6 | ColumnontVenetLast15PmDsPackets | read-only | current | ONT venet PM counters Downstream Packets Count. |
| 1.3.6.1.4.1.890.1.5.13.13.31.3.7.2.1.7 | ColumnontVenetLast15PmDsMcastPackets | read-only | current | ONT venet PM counters Downstream Multicast Packets Count. |
| 1.3.6.1.4.1.890.1.5.13.13.31.3.7.2.1.8 | ColumnontVenetLast15PmDsBcastPackets | read-only | current | ONT venet PM counters Downstream Broadcast Packets Count. |
| 1.3.6.1.4.1.890.1.5.13.13.31.3.7.2.1.9 | ColumnontVenetLast15PmInterval | read-only | current | ONT venet PM counters Interval. |
| 1.3.6.1.4.1.890.1.5.13.13.31.3.8 | NodeontVenetStatusInfo | |||
| 1.3.6.1.4.1.890.1.5.13.13.31.3.8.1 | TableontVenetStatusTable | not-accessible | current | |
| 1.3.6.1.4.1.890.1.5.13.13.31.3.8.1.1 | RowontVenetStatusEntry | not-accessible | current | An entry in ontVenetStatusInfo |
| 1.3.6.1.4.1.890.1.5.13.13.31.3.8.1.1.1 | ColumnontVenetStatus | read-only | current | ONT Venet ME provision status. |
| 1.3.6.1.4.1.890.1.5.13.13.31.3.9 | NodeontPotsStatusInfo | |||
| 1.3.6.1.4.1.890.1.5.13.13.31.3.9.1 | TableontPotsStatusTable | not-accessible | current | |
| 1.3.6.1.4.1.890.1.5.13.13.31.3.9.1.1 | RowontPotsStatusEntry | not-accessible | current | An entry in ontPotsStatusInfo |
| 1.3.6.1.4.1.890.1.5.13.13.31.3.9.1.1.1 | ColumnontPotsStatus | read-only | current | ONT Pots ME provision status. |
| 1.3.6.1.4.1.890.1.5.13.13.31.3.10 | NodeontUniportStatusInfo | |||
| 1.3.6.1.4.1.890.1.5.13.13.31.3.10.1 | TableuniportVlanStatusTable | not-accessible | current | |
| 1.3.6.1.4.1.890.1.5.13.13.31.3.10.1.1 | RowuniportVlanStatusEntry | not-accessible | current | An entry in uniportVlanStatusInfo |
| 1.3.6.1.4.1.890.1.5.13.13.31.3.10.1.1.1 | ColumnuniportVlanStatus | read-only | current | uniport VLAN ME provision status. |
| 1.3.6.1.4.1.890.1.5.13.13.31.3.10.2 | TableuniportFdbTable | not-accessible | current | |
| 1.3.6.1.4.1.890.1.5.13.13.31.3.10.2.1 | RowuniportFdbEntry | not-accessible | current | uniport fdb address table, following the content of OMCI MAC bridge port bridge table data ME. |
| 1.3.6.1.4.1.890.1.5.13.13.31.3.10.2.1.1 | ColumnuniFdbIndex | read-only | mandatory | uniport fdb index. |
| 1.3.6.1.4.1.890.1.5.13.13.31.3.10.2.1.2 | ColumnuniFdbMac | read-only | current | uniport MAC address. |
| 1.3.6.1.4.1.890.1.5.13.13.31.3.10.2.1.3 | ColumnuniFdbAge | read-only | current | uniport MAC aging time in seconds. |
| 1.3.6.1.4.1.890.1.5.13.13.31.3.10.2.1.4 | ColumnuniFdbDynamic | read-only | current | uniport MAC address type, either dynamic or static. |
| 1.3.6.1.4.1.890.1.5.13.13.31.3.10.2.1.5 | ColumnuniFdbFilter | read-only | current | uniport MAC filter type, either forward or filter. |
| 1.3.6.1.4.1.890.1.5.13.13.31.3.10.3 | TableuniportIgmpStatisticsTable | not-accessible | current | This table includes IGMP Channel statistics information |
| 1.3.6.1.4.1.890.1.5.13.13.31.3.10.3.1 | RowuniportIgmpStatisticsEntry | not-accessible | current | An entry in uniport Igmp Statistics Table |
| 1.3.6.1.4.1.890.1.5.13.13.31.3.10.3.1.1 | ColumnuniportIgmpStatisticsUniVid | read-only | current | UniVid |
| 1.3.6.1.4.1.890.1.5.13.13.31.3.10.3.1.2 | ColumnuniportIgmpStatisticsRxReportV1 | read-only | current | RxReportV1 |
| 1.3.6.1.4.1.890.1.5.13.13.31.3.10.3.1.3 | ColumnuniportIgmpStatisticsRxReportV2 | read-only | current | RxReportV2 |
| 1.3.6.1.4.1.890.1.5.13.13.31.3.10.3.1.4 | ColumnuniportIgmpStatisticsRxReportV3 | read-only | current | RxReportV3 |
| 1.3.6.1.4.1.890.1.5.13.13.31.3.10.3.1.5 | ColumnuniportIgmpStatisticsRxLeave | read-only | current | RxLeave |
| 1.3.6.1.4.1.890.1.5.13.13.31.3.10.3.1.6 | ColumnuniportIgmpStatisticsDropRate | read-only | current | DropRate |
| 1.3.6.1.4.1.890.1.5.13.13.31.3.10.3.1.7 | ColumnuniportIgmpStatisticsDropOthers | read-only | current | DropOthers |
| 1.3.6.1.4.1.890.1.5.13.13.31.3.11 | NodeontVideoStatus | |||
| 1.3.6.1.4.1.890.1.5.13.13.31.3.11.1 | TableontVideoStatusTable | not-accessible | current | |
| 1.3.6.1.4.1.890.1.5.13.13.31.3.11.1.1 | RowontVideoStatusEntry | not-accessible | current | An entry in ontVideoStatus |
| 1.3.6.1.4.1.890.1.5.13.13.31.3.11.1.1.1 | ColumnontVideoPortStatus | read-only | current | ontVideo provision status. |
| 1.3.6.1.4.1.890.1.5.13.13.31.3.12 | TableontDdmiHistoryStatusTable | not-accessible | current | |
| 1.3.6.1.4.1.890.1.5.13.13.31.3.12.1 | RowontDdmiHistoryStatusEntry | not-accessible | current | An entry in ontDdmiHistoryStatusTable |
| 1.3.6.1.4.1.890.1.5.13.13.31.3.12.1.1 | ColumnontDdmiHistLast15Voltage | read-only | current | ONT Voltage (V) in the last 15 minutes. |
| 1.3.6.1.4.1.890.1.5.13.13.31.3.12.1.2 | ColumnontDdmiHistLast15RxPower | read-only | current | ONT Rx power (dbm) in the last 15 minutes. |
| 1.3.6.1.4.1.890.1.5.13.13.31.3.12.1.3 | ColumnontDdmiHistLast15TxPower | read-only | current | ONT Tx power (db) in the last 15 minutes. |
| 1.3.6.1.4.1.890.1.5.13.13.31.3.12.1.4 | ColumnontDdmiHistLast15LaserCurrent | read-only | current | ONT Laser Bias current (uA) in the last 15 minutes. |
| 1.3.6.1.4.1.890.1.5.13.13.31.3.12.1.5 | ColumnontDdmiHistLast15Temperature | read-only | current | ONT Temperature (C) in the last 15 minutes. |
| 1.3.6.1.4.1.890.1.5.13.13.31.8 | NodeuniPortOpModeSetup | |||
| 1.3.6.1.4.1.890.1.5.13.13.31.8.1 | TableuniPortOpModePortTable | not-accessible | current | |
| 1.3.6.1.4.1.890.1.5.13.13.31.8.1.1 | RowuniPortOpModePortEntry | not-accessible | current | An entry in uniPortOpModePortTable. |
| 1.3.6.1.4.1.890.1.5.13.13.31.8.1.1.1 | ColumnuniPortOpModePortVlanTranslation | read-write | current | |
| 1.3.6.1.4.1.890.1.5.13.13.31.8.1.1.2 | ColumnuniPortOpModePortVlanXlateMissDrop | read-write | current | |
| 1.3.6.1.4.1.890.1.5.13.13.31.8.1.1.3 | ColumnuniPortOpModePortEgrVlanXlateMissDrop | read-write | current | |
| 1.3.6.1.4.1.890.1.5.13.13.31.14 | NodetransceiverInfo | |||
| 1.3.6.1.4.1.890.1.5.13.13.31.14.1 | TabletransceiverSerialInfoTable | not-accessible | current | |
| 1.3.6.1.4.1.890.1.5.13.13.31.14.1.1 | RowtransceiverSerialInfoEntry | not-accessible | current | An entry in transceiverSerialInfoTable. |
| 1.3.6.1.4.1.890.1.5.13.13.31.14.1.1.1 | ColumntransceiverSerialInfoEntryPort | read-only | current | Index of transceiverSerialInfo. It is referred to ifIndex |
| 1.3.6.1.4.1.890.1.5.13.13.31.14.1.1.2 | ColumntransceiverSerialInfoEntryStatus | read-only | current | Transceiver module status. 1:okWithDdm. 2:okWithoutDdm. 3:nonOperational |
| 1.3.6.1.4.1.890.1.5.13.13.31.14.1.1.3 | ColumntransceiverSerialInfoEntryVendor | read-only | current | Transceiver module vendor name. |
| 1.3.6.1.4.1.890.1.5.13.13.31.14.1.1.4 | ColumntransceiverSerialInfoEntryPartNo | read-only | current | Part number provided by transceiver module vendor. |
| 1.3.6.1.4.1.890.1.5.13.13.31.14.1.1.5 | ColumntransceiverSerialInfoEntrySerialNo | read-only | current | Serial number provided by transceiver module vendor. |
| 1.3.6.1.4.1.890.1.5.13.13.31.14.1.1.6 | ColumntransceiverSerialInfoEntryRevision | read-only | current | Revision level for part number provided by transceiver module vendor. |
| 1.3.6.1.4.1.890.1.5.13.13.31.14.1.1.7 | ColumntransceiverSerialInfoEntryDateCode | read-only | current | Transceiver module vendor's manufacturing date code |
| 1.3.6.1.4.1.890.1.5.13.13.31.14.1.1.8 | ColumntransceiverSerialInfoEntryTransceiver | read-only | current | Transceiver module type names |
| 1.3.6.1.4.1.890.1.5.13.13.31.14.1.1.9 | ColumntransceiverSerialInfoEntryCalibration | read-only | current | Transceiver module type calibration |
| 1.3.6.1.4.1.890.1.5.13.13.31.14.2 | TabletransceiverDdmInfoTable | not-accessible | current | |
| 1.3.6.1.4.1.890.1.5.13.13.31.14.2.1 | RowtransceiverDdmInfoEntry | not-accessible | current | An entry in transceiverDdmInfoTable. |
| 1.3.6.1.4.1.890.1.5.13.13.31.14.2.1.1 | ColumntransceiverDdmInfoEntryPort | read-only | current | Index of transceiverDdmInfo. This will be referred to ifIndex |
| 1.3.6.1.4.1.890.1.5.13.13.31.14.2.1.2 | ColumntransceiverDdmInfoEntryType | read-only | current | Transceiver DDM information type. 1: Temperature 2: Voltage 3: TX Bias 4: TX power 5: RX power |
| 1.3.6.1.4.1.890.1.5.13.13.31.14.2.1.3 | ColumntransceiverDdmInfoEntryAlarmMax | read-only | current | Transceiver high alarm threshold. The unit for temperature is C The unit for voltage is V The unit for TX bias is mA The unit for TX/RX power is dbm The value … |
| 1.3.6.1.4.1.890.1.5.13.13.31.14.2.1.4 | ColumntransceiverDdmInfoEntryAlarmMin | read-only | current | Transceiver low alarm threshold. The unit for temperature is C The unit for voltage is V The unit for TX bias is mA The unit for TX/RX power is dbm The value n… |
| 1.3.6.1.4.1.890.1.5.13.13.31.14.2.1.5 | ColumntransceiverDdmInfoEntryWarnMax | read-only | current | Transceiver high warn threshold. The unit for temperature is C The unit for voltage is V The unit for TX bias is mA The unit for TX/RX power is dbm The value n… |
| 1.3.6.1.4.1.890.1.5.13.13.31.14.2.1.6 | ColumntransceiverDdmInfoEntryWarnMin | read-only | current | Transceiver low warn threshold. The unit for temperature is C The unit for voltage is V The unit for TX bias is mA The unit for TX/RX power is dbm The value ne… |
| 1.3.6.1.4.1.890.1.5.13.13.31.14.2.1.7 | ColumntransceiverDdmInfoEntryCurrent | read-only | current | Transceiver current DDM value. The unit for temperature is C The unit for voltage is V The unit for TX bias is mA The unit for TX/RX power is dbm The value neg… |
| 1.3.6.1.4.1.890.1.5.13.13.31.14.2.1.8 | ColumntransceiverDdmInfoEntryDescription | read-only | current | Transceiver DDM information description. Show N/A if transceiver DDM information is not available. |
| 1.3.6.1.4.1.890.1.5.13.13.31.14.3 | TabletransceiverDdmInfoProfileTable | not-accessible | current | |
| 1.3.6.1.4.1.890.1.5.13.13.31.14.3.1 | RowtransceiverDdmInfoProfileEntry | not-accessible | current | An entry in transceiverDdmInfoProfileTable. |
| 1.3.6.1.4.1.890.1.5.13.13.31.14.3.1.1 | ColumntransceiverDdmInfoProfilePort | read-only | current | Index of transceiverDdmInfoProfile. This will be referred to ifIndex |
| 1.3.6.1.4.1.890.1.5.13.13.31.14.3.1.2 | ColumntransceiverDdmInfoProfileType | read-only | current | Transceiver DDM information type. 1: Temperature 2: Voltage 3: TX Bias 4: TX power 5: RX power |
| 1.3.6.1.4.1.890.1.5.13.13.31.14.3.1.3 | ColumntransceiverDdmInfoProfileAlarmMax | read-write | current | Transceiver high alarm threshold. The unit for temperature is 0.01C, value range <12800 ~ -12800> The unit for voltage is 0.01V, value range <655 ~ 0> The unit… |
| 1.3.6.1.4.1.890.1.5.13.13.31.14.3.1.4 | ColumntransceiverDdmInfoProfileAlarmMin | read-write | current | Transceiver low alarm threshold. The unit for temperature is 0.01C, value range <12800 ~ -12800> The unit for voltage is 0.01V, value range <655 ~ 0> The unit … |
| 1.3.6.1.4.1.890.1.5.13.13.31.14.3.1.5 | ColumntransceiverDdmInfoProfileWarnMax | read-write | current | Transceiver high warn threshold. The unit for temperature is 0.01C, value range <12800 ~ -12800> The unit for voltage is 0.01V, value range <655 ~ 0> The unit … |
| 1.3.6.1.4.1.890.1.5.13.13.31.14.3.1.6 | ColumntransceiverDdmInfoProfileWarnMin | read-write | current | Transceiver low warn threshold. The unit for temperature is 0.01C, value range <12800 ~ -12800> The unit for voltage is 0.01V, value range <655 ~ 0> The unit f… |
| 1.3.6.1.4.1.890.1.5.13.13.31.14.3.1.7 | ColumntransceiverDdmInfoProfileDescription | read-only | current | Transceiver DDM information description. Show N/A if transceiver DDM information is not available. |
| 1.3.6.1.4.1.890.1.5.13.13.31.14.3.1.8 | ColumntransceiverDdmInfoProfileRowstatus | read-create | current | Profile enabled/disabled status. |
| 1.3.6.1.4.1.890.1.5.13.13.31.14.4 | TabletransceiverPerOntTable | not-accessible | current | Per ONT measure value on OLT GPON transceiver |
| 1.3.6.1.4.1.890.1.5.13.13.31.14.4.1 | RowtransceiverPerOntEntry | not-accessible | current | An entry in transceiverPerOntTable. |
| 1.3.6.1.4.1.890.1.5.13.13.31.14.4.1.1 | ColumntransceiverPerOntNumber | not-accessible | current | transceiverPerOntNumber is the number of configuration. |
| 1.3.6.1.4.1.890.1.5.13.13.31.14.4.1.2 | ColumntransceiverPerOntRxPower | read-only | current | Transceiver high alarm threshold. The unit for RX power is dbm The value neg inf represents negative infinit(0mW) The value N/A represents not applicable. |
| 1.3.6.1.4.1.890.1.5.13.13.31.15 | NodemulticastStatus | |||
| 1.3.6.1.4.1.890.1.5.13.13.31.15.1 | TableigmpchannelStatusTable | not-accessible | current | |
| 1.3.6.1.4.1.890.1.5.13.13.31.15.1.1 | RowigmpchannelStatusEntry | not-accessible | current | IGMP channel status. |
| 1.3.6.1.4.1.890.1.5.13.13.31.15.1.1.1 | ColumnigmpchannelStatusVlanID | read-only | current | |
| 1.3.6.1.4.1.890.1.5.13.13.31.15.1.1.2 | ColumnigmpchannelStatusIfIndex | read-only | current | |
| 1.3.6.1.4.1.890.1.5.13.13.31.15.1.1.3 | ColumnigmpchannelStatusGroupAddressType | read-only | current | The address type of the igmpchannelStatusGroupAddress entry. |
| 1.3.6.1.4.1.890.1.5.13.13.31.15.1.1.4 | ColumnigmpchannelStatusGroupAddress | read-only | current | |
| 1.3.6.1.4.1.890.1.5.13.13.31.15.1.1.5 | ColumnigmpchannelStatusGem | read-only | current | |
| 1.3.6.1.4.1.890.1.5.13.13.31.15.1.1.6 | ColumnigmpchannelStatusPortAid | read-only | current | |
| 1.3.6.1.4.1.890.1.5.13.13.31.15.1.1.7 | ColumnigmpchannelStatusUniVid | read-only | current | |
| 1.3.6.1.4.1.890.1.5.13.13.31.15.1.1.8 | ColumnigmpchannelStatusGroupFilterMode | read-only | current | The current cache state, applicable to MGMDv3-compatible nodes. The value indicates whether the state is INCLUDE or EXCLUDE. |
| 1.3.6.1.4.1.890.1.5.13.13.31.15.1.1.9 | ColumnigmpchannelStatusGroupUpTime | read-only | current | The value specifies the group up time of indicated multicast group. |
| 1.3.6.1.4.1.890.1.5.13.13.31.15.2 | TableigmpchannelClientSrcIpTable | not-accessible | current | |
| 1.3.6.1.4.1.890.1.5.13.13.31.15.2.1 | RowigmpchannelClientSrcIpEntry | not-accessible | current | An entry in igmpchannelClientSrcIpTable. |
| 1.3.6.1.4.1.890.1.5.13.13.31.15.2.1.1 | ColumnigmpchannelClientSrcIpIndex | read-only | current | |
| 1.3.6.1.4.1.890.1.5.13.13.31.15.2.1.2 | ColumnigmpchannelClientSrcIpAddressType | read-only | current | |
| 1.3.6.1.4.1.890.1.5.13.13.31.15.2.1.3 | ColumnigmpchannelClientSrcIpAddress | read-only | current | |
| 1.3.6.1.4.1.890.1.5.13.13.31.16 | NodegponVlanTranslationSetup | |||
| 1.3.6.1.4.1.890.1.5.13.13.31.16.1 | TablegponVlanTranslationRuleTable | not-accessible | current | |
| 1.3.6.1.4.1.890.1.5.13.13.31.16.1.1 | RowgponVlanTranslationRuleEntry | not-accessible | current | An entry in vlan-translation rule table |
| 1.3.6.1.4.1.890.1.5.13.13.31.16.1.1.1 | ColumngponVlanTranslationRuleName | read-write | current | The name of vlan-translation entry |
| 1.3.6.1.4.1.890.1.5.13.13.31.16.1.1.2 | ColumngponVlanTranslationRulePort | read-only | current | interface port id |
| 1.3.6.1.4.1.890.1.5.13.13.31.16.1.1.3 | ColumngponVlanTranslationRuleOuterVid | read-only | current | outer vid. The range of VID is between 1 and 4094. 0 presents ignore this field |
| 1.3.6.1.4.1.890.1.5.13.13.31.16.1.1.4 | ColumngponVlanTranslationRuleOuterPriority | read-only | current | outer priority |
| 1.3.6.1.4.1.890.1.5.13.13.31.16.1.1.5 | ColumngponVlanTranslationRuleInnerVid | read-only | current | inner vid. The range of VID is between 1 and 4094. 0 presents ignore this field |
| 1.3.6.1.4.1.890.1.5.13.13.31.16.1.1.6 | ColumngponVlanTranslationRuleInnerPriority | read-only | current | inner priority |
| 1.3.6.1.4.1.890.1.5.13.13.31.16.1.1.7 | ColumngponVlanTranslationRuleTransSVid | read-write | current | translated Svid. The range of VID is between 1 and 4094. 0 presents ignore this field |
| 1.3.6.1.4.1.890.1.5.13.13.31.16.1.1.8 | ColumngponVlanTranslationRuleSPriority | read-write | current | S priority |
| 1.3.6.1.4.1.890.1.5.13.13.31.16.1.1.9 | ColumngponVlanTranslationRuleTransCVid | read-write | current | translated Cvid. The range of VID is between 1 and 4094. 0 presents ignore this field |
| 1.3.6.1.4.1.890.1.5.13.13.31.16.1.1.10 | ColumngponVlanTranslationRuleCPriority | read-write | current | C priority |
| 1.3.6.1.4.1.890.1.5.13.13.31.16.1.1.11 | ColumngponVlanTranslationRuleN1Map | read-write | current | N:1 mapping group id. 0 presents 1:1 map |
| 1.3.6.1.4.1.890.1.5.13.13.31.16.1.1.12 | ColumngponVlanTranslationRuleRowStatus | read-create | current | |
| 1.3.6.1.4.1.890.1.5.13.13.33 | Nodeport | |||
| 1.3.6.1.4.1.890.1.5.13.13.33.1 | TablesubrPortTable | not-accessible | current | This table includes subscriber attributes for the port. |
| 1.3.6.1.4.1.890.1.5.13.13.33.1.1 | RowsubrPortEntry | not-accessible | current | An entry in subrPortTable. |
| 1.3.6.1.4.1.890.1.5.13.13.33.1.1.1 | ColumnsubrPortName | read-write | current | Name of the subscriber. |
| 1.3.6.1.4.1.890.1.5.13.13.33.1.1.2 | ColumnsubrPortTel | read-write | current | TelNo. of the subscriber. |
| 1.3.6.1.4.1.890.1.5.13.13.33.2 | NodeadslPort | |||
| 1.3.6.1.4.1.890.1.5.13.13.33.2.1 | TableadslLineStatusTable | not-accessible | current | This table includes the ADSL line status. |
| 1.3.6.1.4.1.890.1.5.13.13.33.2.1.1 | RowadslLineStatusEntry | not-accessible | current | An entry in adslLineStatusTable. |
| 1.3.6.1.4.1.890.1.5.13.13.33.2.1.1.1 | ColumnadslLineStatusMode | read-only | current | The link up mode of the ADSL line. |
| 1.3.6.1.4.1.890.1.5.13.13.33.2.1.1.2 | ColumnadslLineStatusUpTime | read-only | current | The time since the ADSL line link up. format:<day:hour:min:sec> |
| 1.3.6.1.4.1.890.1.5.13.13.34 | Nodestp | |||
| 1.3.6.1.4.1.890.1.5.13.13.34.1 | ScalarstpEnable | read-write | current | Enable or disable the spanning tree protocol. |
| 1.3.6.1.4.1.890.1.5.13.13.34.2 | ScalarstpMode | read-write | current | Select the spanning mode is RSTP or MSTP. |
| 1.3.6.1.4.1.890.1.5.13.13.34.3 | Nodemstp | |||
| 1.3.6.1.4.1.890.1.5.13.13.34.3.1 | ScalarmstpHelloTime | read-write | current | The value that all bridges use for HelloTime when this bridge is acting as the root. |
| 1.3.6.1.4.1.890.1.5.13.13.34.3.2 | ScalarmstpMaxAge | read-write | current | The value that all bridges use for MaxAge when this bridge is acting as the root. |
| 1.3.6.1.4.1.890.1.5.13.13.34.3.3 | ScalarmstpForwardDelay | read-write | current | The value that all bridges use for ForwardDelay when this bridge is acting as the root. |
| 1.3.6.1.4.1.890.1.5.13.13.34.3.4 | TablemstpVlanTable | not-accessible | current | This table contains one entry for each instance of MSTP. This table is supported by R1.02 and later versions. |
| 1.3.6.1.4.1.890.1.5.13.13.34.3.4.1 | RowmstpVlanEntry | not-accessible | current | A conceptual row containing the status of the MSTP instance. |
| 1.3.6.1.4.1.890.1.5.13.13.34.3.4.1.1 | ColumnmstpVlanIndex | read-only | current | Uniquely identifies an instance. |
| 1.3.6.1.4.1.890.1.5.13.13.34.3.4.1.2 | ColumnmstpVlans1k | read-write | current | A string of octets containing one bit per VLAN for VLANS with VlanIndex values 0 through 1023. The first octet corresponds to VLANs with VlanIndex values 0 thr… |
| 1.3.6.1.4.1.890.1.5.13.13.34.3.4.1.3 | ColumnmstpVlans2k | read-write | current | A string of octets containing one bit per VLAN for VLANS with VlanIndex values 1024 through 2047. The first octet corresponds to VLANs with VlanIndex values 10… |
| 1.3.6.1.4.1.890.1.5.13.13.34.3.4.1.4 | ColumnmstpVlans3k | read-write | current | A string of octets containing one bit per VLAN for VLANS with VlanIndex values 2048 through 3071. The first octet corresponds to VLANs with VlanIndex values 20… |
| 1.3.6.1.4.1.890.1.5.13.13.34.3.4.1.5 | ColumnmstpVlans4k | read-write | current | A string of octets containing one bit per VLAN for VLANS with VlanIndex values 3072 through 4095. The first octet corresponds to VLANs with VlanIndex values 30… |
| 1.3.6.1.4.1.890.1.5.13.13.34.3.5 | TablemstpInsTable | not-accessible | current | Port configuration for multiple spanning trees. |
| 1.3.6.1.4.1.890.1.5.13.13.34.3.5.1 | RowmstpInsEntry | not-accessible | current | An entry of mstpXstPortTable. |
| 1.3.6.1.4.1.890.1.5.13.13.34.3.5.1.1 | ColumnmstpInsIndex | read-only | current | Identifies a spanning tree. |
| 1.3.6.1.4.1.890.1.5.13.13.34.3.5.1.2 | ColumnmstpInsPort | read-only | current | The port number of the port for which this entry contains MSTP management information. |
| 1.3.6.1.4.1.890.1.5.13.13.34.3.5.1.3 | ColumnmstpInsEnable | read-write | current | The enabled/disabled status of the port. |
| 1.3.6.1.4.1.890.1.5.13.13.34.3.5.1.4 | ColumnmstpInsPortPriority | read-write | current | In an MSTP Bridge, the Port's Port Priority parameter value for the MSTI, i.e. the priority field for the Port Identifier for the Port for the MSTI. |
| 1.3.6.1.4.1.890.1.5.13.13.35 | Nodediagnostic | |||
| 1.3.6.1.4.1.890.1.5.13.13.35.1 | Nodeoamloopback | |||
| 1.3.6.1.4.1.890.1.5.13.13.35.1.1 | ScalaroamloopbackTarget | read-write | current | IfIndex of the port which would be performed oamloopback test. |
| 1.3.6.1.4.1.890.1.5.13.13.35.1.2 | ScalaroamloopbackOps | read-write | current | The manager sets value to 1 to start the oamloopback test and the agent clears the object to zero when oamloopback test is completed. |
| 1.3.6.1.4.1.890.1.5.13.13.35.1.3 | ScalaroamloopbackPacketNumber | read-write | current | Number of packets to be sent. 1~100000 |
| 1.3.6.1.4.1.890.1.5.13.13.35.1.4 | ScalaroamloopbackPacketSize | read-write | current | Size of each packet. 64~1518 |
| 1.3.6.1.4.1.890.1.5.13.13.35.1.5 | NodeoamloopbackResult | |||
| 1.3.6.1.4.1.890.1.5.13.13.35.1.5.1 | ScalaroamloopbackRecvCnt | read-only | current | Number of packets received. |
| 1.3.6.1.4.1.890.1.5.13.13.35.1.5.2 | ScalaroamloopbackElapseTime | read-only | current | oamloopback test elapsed time. |
| 1.3.6.1.4.1.890.1.5.13.13.35.1.5.3 | ScalaroamloopbackErrorStatus | read-only | current | oamloopback test status. |
| 1.3.6.1.4.1.890.1.5.13.13.36 | NodeoamSetup | |||
| 1.3.6.1.4.1.890.1.5.13.13.36.1 | TableoamPortTable | not-accessible | current | The table contains OAM (Operations, Administration, and Maintenance) port configuration. |
| 1.3.6.1.4.1.890.1.5.13.13.36.1.1 | RowoamPortEntry | not-accessible | current | An entry contains OAM port configuration. |
| 1.3.6.1.4.1.890.1.5.13.13.36.1.1.1 | ColumnoamPortFunctionsSupported | read-write | current | The OAM functions supported on this Ethernet-like interface. OAM consists of separate functional sets beyond the basic discovery process that is always require… |
| 1.3.6.1.4.1.890.1.5.13.13.37 | NodezyxelLldp | |||
| 1.3.6.1.4.1.890.1.5.13.13.37.1 | NodezyxelLldpSetup | |||
| 1.3.6.1.4.1.890.1.5.13.13.37.1.1 | ScalarzyLldpState | read-write | current | Enable/Disable LLDP on the switch. The Link Layer Discover Protocol (LLDP) is to discover and make available physical topology information for network manageme… |
| 1.3.6.1.4.1.890.1.5.13.13.37.1.2 | ScalarzyLldpLastUpdatedTime | read-only | current | Last updated time (Y-M-D hh:mm:ss). |
| 1.3.6.1.4.1.890.1.5.13.13.37.1.3 | TablezyLldpConfigTable | not-accessible | current | |
| 1.3.6.1.4.1.890.1.5.13.13.37.1.3.1 | RowzyLldpConfigEntry | not-accessible | current | |
| 1.3.6.1.4.1.890.1.5.13.13.37.1.3.1.1 | ColumnzyLldpConfigManAddrPortsTxEnable | read-write | current | A set of ports that are identified by a PortList, in which each port is represented as a bit. The corresponding local system management address instance will b… |
| 1.3.6.1.4.1.890.1.5.13.13.37.1.4 | TablezyLldpClearTable | not-accessible | current | |
| 1.3.6.1.4.1.890.1.5.13.13.37.1.4.1 | RowzyLldpClearEntry | not-accessible | current | |
| 1.3.6.1.4.1.890.1.5.13.13.37.1.4.1.1 | ColumnzyLldpRemoteInfoClear | read-write | current | Clear all the LLDP remote information. |
| 1.3.6.1.4.1.890.1.5.13.13.37.1.4.1.2 | ColumnzyLldpRemoteInfoClearPorts | read-write | current | Clear the LLDP remote informationof of the port(s). |
| 1.3.6.1.4.1.890.1.5.13.13.37.1.4.1.3 | ColumnzyLldpStatisticsClear | read-write | current | Clear all the LLDP statistics. |
| 1.3.6.1.4.1.890.1.5.13.13.37.2 | NodezyxelLldpStatus | |||
| 1.3.6.1.4.1.890.1.5.13.13.37.2.4 | TablezyLldpStatsTable | not-accessible | current | |
| 1.3.6.1.4.1.890.1.5.13.13.37.2.4.1 | RowzyLldpStatsEntry | not-accessible | current | |
| 1.3.6.1.4.1.890.1.5.13.13.37.2.4.1.1 | ColumnzyLldpStatsRemTablesLastChangeTime | read-only | current | Last updated time (Y-M-D hh:mm:ss). |
| 1.3.6.1.4.1.890.1.5.13.13.37.2.4.1.2 | ColumnzyLldpStatsRemTablesInserts | read-only | current | The number of times the complete set of information advertised by a particular MSAP has been inserted into tables contained in lldpRemoteSystemsData and lldpEx… |
| 1.3.6.1.4.1.890.1.5.13.13.37.2.4.1.3 | ColumnzyLldpStatsRemTablesDeletes | read-only | current | The number of times the complete set of information advertised by a particular MSAP has been deleted from tables contained in lldpRemoteSystemsData and lldpExt… |
| 1.3.6.1.4.1.890.1.5.13.13.37.2.4.1.4 | ColumnzyLldpStatsRemTablesDrops | read-only | current | The number of times the complete set of information advertised by a particular MSAP could not be entered into tables contained in lldpRemoteSystemsData and lld… |
| 1.3.6.1.4.1.890.1.5.13.13.37.2.4.1.5 | ColumnzyLldpStatsRemTablesAgeouts | read-only | current | The number of times the complete set of information advertised by a particular MSAP has been deleted from tables contained in lldpRemoteSystemsData and lldpExt… |
| 1.3.6.1.4.1.890.1.5.13.13.37.3 | ScalarzyLldpSlotNum | read-only | current | slot number |
| 1.3.6.1.4.1.890.1.5.13.13.38 | Nodehostprotect | |||
| 1.3.6.1.4.1.890.1.5.13.13.38.1 | NodehostprotectConfig | |||
| 1.3.6.1.4.1.890.1.5.13.13.38.1.1 | TablehostprotectConfigTable | not-accessible | mandatory | |
| 1.3.6.1.4.1.890.1.5.13.13.38.1.1.1 | RowhostprotectConfigEntry | not-accessible | mandatory | |
| 1.3.6.1.4.1.890.1.5.13.13.38.1.1.1.1 | ColumnhostprotectProtocol | read-only | mandatory | |
| 1.3.6.1.4.1.890.1.5.13.13.38.1.1.1.2 | ColumnhostprotectRatelimit | read-write | mandatory | Rate-limit Setting: 10~500 pps (0 : No limit) |
| 1.3.6.1.4.1.890.1.5.13.13.38.2 | NodehostprotectStatistic | |||
| 1.3.6.1.4.1.890.1.5.13.13.38.2.1 | TablehostprotectStatisticTable | not-accessible | mandatory | |
| 1.3.6.1.4.1.890.1.5.13.13.38.2.1.1 | RowhostprotectStatisticEntry | not-accessible | mandatory | |
| 1.3.6.1.4.1.890.1.5.13.13.38.2.1.1.1 | ColumnhostprotectStatisticProtocol | read-only | mandatory | |
| 1.3.6.1.4.1.890.1.5.13.13.38.2.1.1.2 | ColumnhostprotectStatisticRxPkt | read-write | mandatory | |
| 1.3.6.1.4.1.890.1.5.13.13.38.2.1.1.3 | ColumnhostprotectStatisticRxDrop | read-write | mandatory | |
| 1.3.6.1.4.1.890.1.5.13.13.38.2.2 | ScalarhostprotectClear | read-write | current | Set 1 to clear all host protection statistic |
| 1.3.6.1.4.1.890.1.5.13.13.39 | NodeerpsSetup | |||
| 1.3.6.1.4.1.890.1.5.13.13.39.1 | ScalarerpsState | read-write | current | |
| 1.3.6.1.4.1.890.1.5.13.13.39.2 | TableerpsRingTable | not-accessible | current | |
| 1.3.6.1.4.1.890.1.5.13.13.39.2.1 | RowerpsRingEntry | not-accessible | current | An entry in erpsRingTable. |
| 1.3.6.1.4.1.890.1.5.13.13.39.2.1.1 | ColumnerpsPort0 | read-write | current | Erps ring port0. |
| 1.3.6.1.4.1.890.1.5.13.13.39.2.1.2 | ColumnerpsPort1 | read-write | current | Erps ring port1. |
| 1.3.6.1.4.1.890.1.5.13.13.39.2.1.3 | ColumnerpsRingId | read-write | current | Erps ring Id. |
| 1.3.6.1.4.1.890.1.5.13.13.39.2.1.4 | ColumnerpsCcmPort0GroupName | read-write | current | Erps ring port0 ccm group name. |
| 1.3.6.1.4.1.890.1.5.13.13.39.2.1.5 | ColumnerpsCcmPort0Level | read-write | current | Erps ring port0 ccm levle. |
| 1.3.6.1.4.1.890.1.5.13.13.39.2.1.6 | ColumnerpsCcmPort0Vlan | read-write | current | Erps ring port0 ccm vlan. |
| 1.3.6.1.4.1.890.1.5.13.13.39.2.1.7 | ColumnerpsCcmPort0TxName | read-write | current | Erps ring port0 ccm tx name. |
| 1.3.6.1.4.1.890.1.5.13.13.39.2.1.8 | ColumnerpsCcmPort0Period | read-write | current | Erps ring port0 ccm period. |
| 1.3.6.1.4.1.890.1.5.13.13.39.2.1.9 | ColumnerpsCcmPort0Priority | read-write | current | Erps ring port0 ccm priority. |
| 1.3.6.1.4.1.890.1.5.13.13.39.2.1.10 | ColumnerpsCcmPort0RxName | read-write | current | Erps ring port 0 ccm rx name. |
| 1.3.6.1.4.1.890.1.5.13.13.39.2.1.11 | ColumnerpsCcmPort1GroupName | read-write | current | Erps ring port1 ccm group name. |
| 1.3.6.1.4.1.890.1.5.13.13.39.2.1.12 | ColumnerpsCcmPort1Level | read-write | current | Erps ring port1 ccm levle. |
| 1.3.6.1.4.1.890.1.5.13.13.39.2.1.13 | ColumnerpsCcmPort1Vlan | read-write | current | Erps ring port1 ccm vlan. |
| 1.3.6.1.4.1.890.1.5.13.13.39.2.1.14 | ColumnerpsCcmPort1TxName | read-write | current | Erps ring port1 ccm tx name. |
| 1.3.6.1.4.1.890.1.5.13.13.39.2.1.15 | ColumnerpsCcmPort1Period | read-write | current | Erps ring port1 ccm period. |
| 1.3.6.1.4.1.890.1.5.13.13.39.2.1.16 | ColumnerpsCcmPort1Priority | read-write | current | Erps ring port1 ccm priority. |
| 1.3.6.1.4.1.890.1.5.13.13.39.2.1.17 | ColumnerpsCcmPort1RxName | read-write | current | Erps ring port1 ccm rx name. |
| 1.3.6.1.4.1.890.1.5.13.13.39.2.1.18 | ColumnerpsRapsPort0Vlan | read-write | current | Erps ring port0 raps vlan. |
| 1.3.6.1.4.1.890.1.5.13.13.39.2.1.19 | ColumnerpsRapsPort0priority | read-write | current | Erps ring port0 raps priority. |
| 1.3.6.1.4.1.890.1.5.13.13.39.2.1.20 | ColumnerpsRapsPort0Level | read-write | current | Erps ring port0 rap level. |
| 1.3.6.1.4.1.890.1.5.13.13.39.2.1.21 | ColumnerpsRapsPort1Vlan | read-write | current | Erps ring port1 raps vlan. |
| 1.3.6.1.4.1.890.1.5.13.13.39.2.1.22 | ColumnerpsRapsPort1priority | read-write | current | Erps ring port1 raps priority. |
| 1.3.6.1.4.1.890.1.5.13.13.39.2.1.23 | ColumnerpsRapsPort1Level | read-write | current | Erps ring port1 raps level. |
| 1.3.6.1.4.1.890.1.5.13.13.39.2.1.24 | ColumnerpsRevertiveMode | read-write | current | Erps ring RevertiveMode enable/disable. |
| 1.3.6.1.4.1.890.1.5.13.13.39.2.1.25 | ColumnerpsWtr | read-write | current | Erps ring WTR. |
| 1.3.6.1.4.1.890.1.5.13.13.39.2.1.26 | ColumnerpsRplOwner | read-write | current | Erps ring owner port. |
| 1.3.6.1.4.1.890.1.5.13.13.39.2.1.27 | ColumnerpsRplNeighbour | read-write | current | Erps ring neighbour port. |
| 1.3.6.1.4.1.890.1.5.13.13.39.2.1.28 | ColumnerpsTunnelPort | read-write | current | Erps ring tunnel port. |
| 1.3.6.1.4.1.890.1.5.13.13.39.2.1.29 | ColumnerpsRingRowStatus | read-create | current | Erps ring enable/disable. |
| 1.3.6.1.4.1.890.1.5.13.13.39.2.1.30 | ColumnerpsRingPort0CcmStatus | read-only | current | Erps ring ccm port0 status. |
| 1.3.6.1.4.1.890.1.5.13.13.39.2.1.31 | ColumnerpsRingPort1CcmStatus | read-only | current | Erps ring ccm port1 status. |
| 1.3.6.1.4.1.890.1.5.13.13.39.2.1.32 | ColumnerpsRingPort0Status | read-only | current | Erps ring port0 status. |
| 1.3.6.1.4.1.890.1.5.13.13.39.2.1.33 | ColumnerpsRingPort1Status | read-only | current | Erps ring port1 status. |
| 1.3.6.1.4.1.890.1.5.13.13.39.2.1.34 | ColumnerpsRingIndex | read-only | current | Erps ring index. |
| 1.3.6.1.4.1.890.1.5.13.13.40 | Nodeerrdis | |||
| 1.3.6.1.4.1.890.1.5.13.13.40.1 | ScalarerrdisReason | read-only | current | Cause reason, Plz refer errdisReasonName for protocol name |
| 1.3.6.1.4.1.890.1.5.13.13.40.2 | ScalarerrdisReasonName | read-only | current | Cause reason name |
| 1.3.6.1.4.1.890.1.5.13.13.40.3 | TableerrdisRecoveryReasonTable | not-accessible | mandatory | |
| 1.3.6.1.4.1.890.1.5.13.13.40.3.1 | RowerrdisRecoveryReasonEntry | not-accessible | mandatory | |
| 1.3.6.1.4.1.890.1.5.13.13.40.3.1.1 | ColumnerrdisRecoveryReasonActive | read-write | mandatory | |
| 1.3.6.1.4.1.890.1.5.13.13.40.3.1.2 | ColumnerrdisRecoveryReasonInterval | read-write | mandatory | |
| 1.3.6.1.4.1.890.1.5.13.13.40.4 | TableerrdisDetectReasonTable | not-accessible | mandatory | |
| 1.3.6.1.4.1.890.1.5.13.13.40.4.1 | RowerrdisDetectReasonEntry | not-accessible | mandatory | An entry in errdisDetectReasonTable. |
| 1.3.6.1.4.1.890.1.5.13.13.40.4.1.1 | ColumnerrdisDetectReasonEnable | read-write | mandatory | |
| 1.3.6.1.4.1.890.1.5.13.13.40.4.1.2 | ColumnerrdisDetectReasonMode | read-write | mandatory | |
| 1.3.6.1.4.1.890.1.5.13.13.40.4.1.3 | ColumnerrdisDetectUpperbound | read-write | mandatory | minimum scale is 8 pkt/s |
| 1.3.6.1.4.1.890.1.5.13.13.40.5 | TableerrdisPortTable | not-accessible | current | Genni Configure. |
| 1.3.6.1.4.1.890.1.5.13.13.40.5.1 | RowerrdisPortEntry | not-accessible | current | |
| 1.3.6.1.4.1.890.1.5.13.13.40.5.1.1 | ColumnerrdisPortThreshold | read-write | current | Detect Threshold |
| 1.3.6.1.4.1.890.1.5.13.13.40.6 | TableerrdisStatusTable | not-accessible | mandatory | |
| 1.3.6.1.4.1.890.1.5.13.13.40.6.1 | RowerrdisStatusEntry | not-accessible | mandatory | An entry in errdisStatusTable. |
| 1.3.6.1.4.1.890.1.5.13.13.40.6.1.1 | ColumnerrdisStatusIfindex | read-only | current | |
| 1.3.6.1.4.1.890.1.5.13.13.40.6.1.2 | ColumnerrdisStatusReason | read-only | current | |
| 1.3.6.1.4.1.890.1.5.13.13.40.6.1.3 | ColumnerrdisStatusDetectMode | read-only | current | |
| 1.3.6.1.4.1.890.1.5.13.13.40.6.1.4 | ColumnerrdisStatusDetectTime | read-only | current | |
| 1.3.6.1.4.1.890.1.5.13.13.40.6.1.5 | ColumnerrdisStatusRecoveryTimeleft | read-only | current | Time left for recovery (secs). When recovery is inactive, it would be zero. |
| 1.3.6.1.4.1.890.1.5.13.13.40.7 | NodeerrdisClear | |||
| 1.3.6.1.4.1.890.1.5.13.13.40.7.1 | ScalarerrdisClearDetected | read-write | current | Clear all detected. |
| 1.3.6.1.4.1.890.1.5.13.13.40.7.2 | ScalarerrdisClearDetectedPorts | read-write | current | Clear the detected status by port(s). |
| 1.3.6.1.4.1.890.1.5.13.13.40.7.3 | ScalarerrdisClearDetectedReason | read-write | current | Clear the detected status by reason. |
| 1.3.6.1.4.1.890.1.5.13.13.40.7.4 | ScalarerrdisClearStatisticPorts | read-write | current | Clear the statistic by port(s). |
| 1.3.6.1.4.1.890.1.5.13.13.40.8 | NodeerrdisTrapNotifications | |||
| 1.3.6.1.4.1.890.1.5.13.13.40.8.1 | NotificationerrdisTrap | current | ||
| 1.3.6.1.4.1.890.1.5.13.13.40.8.2 | NotificationerrdisTrapType | current | Display trap type | |
| 1.3.6.1.4.1.890.1.5.13.13.40.9 | TableerrdisStatisticTable | not-accessible | mandatory | |
| 1.3.6.1.4.1.890.1.5.13.13.40.9.1 | RowerrdisStatisticEntry | not-accessible | mandatory | An entry in errdisStatisticTable. |
| 1.3.6.1.4.1.890.1.5.13.13.40.9.1.1 | ColumnerrdisStatisticIfindex | read-only | current | |
| 1.3.6.1.4.1.890.1.5.13.13.40.9.1.2 | ColumnerrdisStatisticReason | read-only | current | |
| 1.3.6.1.4.1.890.1.5.13.13.40.9.1.3 | ColumnerrdisStatisticDetected | read-only | current | |
| 1.3.6.1.4.1.890.1.5.13.13.40.9.1.4 | ColumnerrdisStatisticRecovery | read-only | current | |
| 1.3.6.1.4.1.890.1.5.13.13.41 | Nodeprotectswitch | |||
| 1.3.6.1.4.1.890.1.5.13.13.41.1 | TableprotectswitchConfigTable | not-accessible | current | The table contains protect switch configuration. |
| 1.3.6.1.4.1.890.1.5.13.13.41.1.1 | RowprotectswitchConfigEntry | not-accessible | current | |
| 1.3.6.1.4.1.890.1.5.13.13.41.1.1.1 | ColumnprotectswitchGroupId | read-only | current | Group ID of protectswitch function. |
| 1.3.6.1.4.1.890.1.5.13.13.41.1.1.2 | ColumnprotectswitchMemberPort | read-write | current | Member ports of the protect switch function. |
| 1.3.6.1.4.1.890.1.5.13.13.41.1.1.3 | ColumnprotectswitchPreemptMode | read-write | current | Preempt mode of the protect switch function. |
| 1.3.6.1.4.1.890.1.5.13.13.41.1.1.4 | ColumnprotectswitchPreemptDelay | read-write | current | preempt delay time of the protect switch function. |
| 1.3.6.1.4.1.890.1.5.13.13.41.2 | TableprotectswitchStatusTable | not-accessible | current | The table contains protect switch status. |
| 1.3.6.1.4.1.890.1.5.13.13.41.2.1 | RowprotectswitchStatusEntry | not-accessible | current | |
| 1.3.6.1.4.1.890.1.5.13.13.41.2.1.1 | ColumngroupId | read-only | current | Group ID of protectswitch function. |
| 1.3.6.1.4.1.890.1.5.13.13.41.2.1.2 | ColumnactivePort | read-only | current | Active port of the protect switch function. |
| 1.3.6.1.4.1.890.1.5.13.13.41.2.1.3 | ColumnbackupPort | read-only | current | Backup port of the protect switch function. |
| 1.3.6.1.4.1.890.1.5.13.13.41.2.1.4 | ColumnactivePortStatus | read-only | current | Active port status of the protect switch function. |
| 1.3.6.1.4.1.890.1.5.13.13.41.2.1.5 | ColumnbackupPortStatus | read-only | current | Backup port status of the protect switch function. |
| 1.3.6.1.4.1.890.1.5.13.13.41.2.1.6 | ColumnactivePortState | read-only | current | Active port state of the protect switch function. |
| 1.3.6.1.4.1.890.1.5.13.13.41.2.1.7 | ColumnbackupPortState | read-only | current | Backup port state of the protect switch function. |
| 1.3.6.1.4.1.890.1.5.13.13.41.2.1.8 | ColumnactivePortBandwidth | read-only | current | Active port bandwidth of the protect switch function. |
| 1.3.6.1.4.1.890.1.5.13.13.41.2.1.9 | ColumnbackupPortBandwidth | read-only | current | Backup port bandwidth of the protect switch function. |
| 1.3.6.1.4.1.890.1.5.13.13.41.2.1.10 | ColumnactivePortTrunkingMember | read-only | current | Active port trunking member of the protect switch function. |
| 1.3.6.1.4.1.890.1.5.13.13.41.2.1.11 | ColumnbackupPortTrunkingMember | read-only | current | Backup port trunking member of the protect switch function. |
Type Definitions
| Name | Syntax | Status | Description |
|---|---|---|---|
| IpInterface | INTEGER { ipIfOutband(0), ipIfInband(1) } | current | ipIfOutband(0) - outband ip interface. ipIfInband(1) - inband ip interface. |
| RemoteOnuStatus | INTEGER { oOS(0), iS(1), oOS-LO(2), oOS-NR(3), oOS-CD(4), oOS-NP(5), oOS-PF(6), oOS-AD(7), oOS-OD(8), oOS-OO(9), oOS-TM(10), oOS-CO(11), oOS-UO(12), oOS-NO(13), oOS-GS(14), oOS-GF(15), oOS-AF(16), oOS-VO(17), oOS-DG(18), oOS-LS(19), oOS-SB(20) } | current | |
| Xdsl2ConfigRtxMode | INTEGER { forbidden(0), preferred(1), forced(2), test(3) } | current | Forbidden(0) - Support for G998.4 is disabled. Preferred(1) - If G998.4 is supported by the far-end, it is enabled. Forced(2) - The line will only train if G998.4 can be enabled. Test(3) - G998.4 is enabled in test mode… |
| Xdsl2StatusActualRaMode | INTEGER { none(0), fixedRateMode(1), raInit(2), dynamicRa(3), sosEnabled(4) } | current | fixedRateMode(1) - Fixed rate mode raInit(2) - Adaptive rate mode at initialization dynamicRa(3) - Dynamic rate adaptation sosEnabled(4) - SOS enabled |
| Xdsl2StatusRtxMode | INTEGER { none(0), rtxInUse(1), rtxForbidden(2), rtxNotSupportedXtuC(3), rtxNotSupportedXtuR(4), rtxNotSupportedBoth(5) } | current | rtxInUse(1) - RTX in use. rtxForbidden(2) - RTX not in use because RTX_MODE = FORBIDDEN. rtxNotSupportedXtuC(3) - RTX not in use because it is not supported by the XTU-C. rtxNotSupportedXtuR(4) - RTX not in use because … |