IPAD-ATM-MIB
150 objects
The IPAD ATM MIB.
Imported Objects
| IPADv2-MIB | ipad |
| SNMPv2-SMI | IpAddress MODULE-IDENTITY OBJECT-TYPE TimeTicks |
| SNMPv2-TC | DisplayString |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.321.100.1.25 | IdentityipadAtm | The IPAD ATM MIB. | ||
| 1.3.6.1.4.1.321.100.1.25.1 | NodeipadAtmParms | |||
| 1.3.6.1.4.1.321.100.1.25.1.1 | TableipadAtmTable | not-accessible | current | Table of ATM parameters. |
| 1.3.6.1.4.1.321.100.1.25.1.1.1 | RowipadAtmTableEntry | not-accessible | current | An entry in the ipad ATM parameter table. |
| 1.3.6.1.4.1.321.100.1.25.1.1.1.1 | ColumnipadAtmIfIndex | read-only | current | The index into the ATM table. |
| 1.3.6.1.4.1.321.100.1.25.1.1.1.2 | ColumnipadAtmOperStatus | read-only | current | The up/down status of this atm interface. |
| 1.3.6.1.4.1.321.100.1.25.1.1.1.3 | ColumnipadAtmVccsOpenedOK | read-only | current | The current number of successfully opened VCCs on this ATM interface. |
| 1.3.6.1.4.1.321.100.1.25.1.1.1.4 | ColumnipadAtmVccsNotOpened | read-only | current | The current number of VCCs that were not successfully opened on this ATM interface. |
| 1.3.6.1.4.1.321.100.1.25.1.1.1.5 | ColumnipadAtmAlarmReset | read-write | current | Reset the alarms or statistics of this ATM interface. |
| 1.3.6.1.4.1.321.100.1.25.1.1.1.6 | ColumnipadAtmOverSubscriptionFactor | read-write | current | The current over-subscription-factor for this ATM interface. Used for VBR and UBR VC connection admission control to allow the either VBR or UBR service catego… |
| 1.3.6.1.4.1.321.100.1.25.1.1.1.7 | ColumnipadAtmLineBandwidth | read-only | current | The current ATM Line interface Bandwidth in cells per second. |
| 1.3.6.1.4.1.321.100.1.25.1.1.1.8 | ColumnipadAtmAAL5Bandwidth | read-only | current | The current AAL5 Bandwidth in cells per second. |
| 1.3.6.1.4.1.321.100.1.25.1.1.1.9 | ColumnipadAtmOverSubBandwidth | read-only | current | The AAL5 Oversubscription Bandwidth in cells per second. This value is ipadAtmAAL5Bandwidth multiplied by the ipadAtmOversubscriptionFactor. |
| 1.3.6.1.4.1.321.100.1.25.1.1.1.10 | ColumnipadAtmCbrUsedBandwidth | read-only | current | The amount of AAL5 Bandwidth allocated to CBR VCs in cells per second. |
| 1.3.6.1.4.1.321.100.1.25.1.1.1.11 | ColumnipadAtmVbrUsedBandwidth | read-only | current | The amount of AAL5 Bandwidth allocated to VBR VCs in cells per second. When OversubscriptionFactor is greater than 1, this value can exceed ipadAtmAAL5Bandwidt… |
| 1.3.6.1.4.1.321.100.1.25.1.1.1.12 | ColumnipadAtmUbrUsedBandwidth | read-only | current | The amount of AAL5 Bandwidth allocated to UBR VCs in cells per second. When OversubscriptionFactor is greater than 1, this value can exceed ipadAtmAAL5Bandwidt… |
| 1.3.6.1.4.1.321.100.1.25.1.1.1.13 | ColumnipadAtmQos0Pcr | read-only | current | The value of PCR to be used for each VC which has no specified QOS profile (0). The VC is configured as UBR with the given Peak Cell Rate. |
| 1.3.6.1.4.1.321.100.1.25.2 | NodeipadAtmStatsParms | |||
| 1.3.6.1.4.1.321.100.1.25.2.1 | TableipadAtmStatsTable | not-accessible | current | Table of ATM statistics. |
| 1.3.6.1.4.1.321.100.1.25.2.1.1 | RowipadAtmStatsTableEntry | not-accessible | current | An entry in the ipad ATM Stats parameter table. |
| 1.3.6.1.4.1.321.100.1.25.2.1.1.1 | ColumnipadAtmStatsIndex | read-only | current | The index representing the ATM interface. |
| 1.3.6.1.4.1.321.100.1.25.2.1.1.2 | ColumnipadAtmStatsPeriodIndex | read-only | current | The index representing the period for the ATM stats entry. |
| 1.3.6.1.4.1.321.100.1.25.2.1.1.3 | ColumnipadAtmStatsTimeStamp | read-only | current | The value of sysUpTime the last time the statistics were updated. |
| 1.3.6.1.4.1.321.100.1.25.2.1.1.4 | ColumnipadAtmStatsRxFramesOK | read-only | current | The number of error-free frames received during the period. |
| 1.3.6.1.4.1.321.100.1.25.2.1.1.5 | ColumnipadAtmStatsTxFramesOK | read-only | current | The number of frames successfully transmitted during the period. |
| 1.3.6.1.4.1.321.100.1.25.2.1.1.6 | ColumnipadAtmStatsRxFramesError | read-only | current | The number of errored frames received during the period. |
| 1.3.6.1.4.1.321.100.1.25.2.1.1.7 | ColumnipadAtmStatsTxFramesError | read-only | current | The number of transmitted frames that were errored. |
| 1.3.6.1.4.1.321.100.1.25.2.1.1.8 | ColumnipadAtmStatsRxBytesOK | read-only | current | The number of error-free bytes received during the period. |
| 1.3.6.1.4.1.321.100.1.25.2.1.1.9 | ColumnipadAtmStatsTxBytesOK | read-only | current | The number of successfully transmitted bytes during the period. |
| 1.3.6.1.4.1.321.100.1.25.2.1.1.10 | ColumnipadAtmStatsLostSync | read-only | current | The number of times sync has been lost or recovered. |
| 1.3.6.1.4.1.321.100.1.25.2.1.1.11 | ColumnipadAtmStatsOamCellsRx | read-only | current | The number of OAM cells received on this ATM link. |
| 1.3.6.1.4.1.321.100.1.25.2.1.1.12 | ColumnipadAtmStatsOamCellsTx | read-only | current | The number of OAM cells transmitted on this ATM link. |
| 1.3.6.1.4.1.321.100.1.25.3 | NodeipadAtmVccParms | |||
| 1.3.6.1.4.1.321.100.1.25.3.1 | TableipadAtmVccTable | not-accessible | current | Table of Virtual Channel parameters. |
| 1.3.6.1.4.1.321.100.1.25.3.1.1 | RowipadAtmVccTableEntry | not-accessible | current | An entry in the ipad ATM Vcc parameter table. |
| 1.3.6.1.4.1.321.100.1.25.3.1.1.1 | ColumnipadAtmVccIndex | read-only | current | The index into the ATM VCC table, corresponding to ifIndex. |
| 1.3.6.1.4.1.321.100.1.25.3.1.1.2 | ColumnipadAtmVccVpiIndex | read-only | current | The VPI for the VCC. |
| 1.3.6.1.4.1.321.100.1.25.3.1.1.3 | ColumnipadAtmVccVciIndex | read-only | current | The VCI for the VCC. |
| 1.3.6.1.4.1.321.100.1.25.3.1.1.4 | ColumnipadAtmVccEncapsulationType | read-write | current | The encapsulation method used on this VCC. vcMux indicates null encapsulation and may be used for IP routing or PPP applications. llcMux indicates LLC encapsul… |
| 1.3.6.1.4.1.321.100.1.25.3.1.1.5 | ColumnipadAtmVccTrafficType | read-only | current | The traffic type of this VCC. |
| 1.3.6.1.4.1.321.100.1.25.3.1.1.6 | ColumnipadAtmVccChannelRate | read-only | current | The channel rate for this VCC. |
| 1.3.6.1.4.1.321.100.1.25.3.1.1.7 | ColumnipadAtmVccAlarmReset | read-write | current | Reset the alarms or statistics of this VCC. |
| 1.3.6.1.4.1.321.100.1.25.3.1.1.8 | ColumnipadAtmVccSLATimer | read-write | current | The time in seconds between SLA measurement packets being sent. |
| 1.3.6.1.4.1.321.100.1.25.3.1.1.9 | ColumnipadAtmVccRemoteFramesOffered | read-only | current | The number of frames offered by the remote device. |
| 1.3.6.1.4.1.321.100.1.25.3.1.1.10 | ColumnipadAtmVccFramesReceived | read-only | current | The number of frames received by this device. |
| 1.3.6.1.4.1.321.100.1.25.3.1.1.11 | ColumnipadAtmVccRemoteDataOffered | read-only | current | The number of data bytes offered by the remote device. |
| 1.3.6.1.4.1.321.100.1.25.3.1.1.12 | ColumnipadAtmVccDataReceived | read-only | current | The number of data bytes received by this device. |
| 1.3.6.1.4.1.321.100.1.25.3.1.1.13 | ColumnipadAtmVccRemoteActive | read-only | current | The current state of the remote device as detected by the local device. |
| 1.3.6.1.4.1.321.100.1.25.3.1.1.14 | ColumnipadAtmVccRemoteVpi | read-only | current | The remote VPI. |
| 1.3.6.1.4.1.321.100.1.25.3.1.1.15 | ColumnipadAtmVccRemoteVci | read-only | current | The remote VCI. |
| 1.3.6.1.4.1.321.100.1.25.3.1.1.16 | ColumnipadAtmVccRemoteIPAddress | read-only | current | The IP Address of the device connected to the remote end of this VCC. |
| 1.3.6.1.4.1.321.100.1.25.3.1.1.17 | ColumnipadAtmVccRemoteUnitId | read-only | current | The Unit ID assigned to the devie connected to the remote end of this VCC. |
| 1.3.6.1.4.1.321.100.1.25.3.1.1.18 | ColumnipadAtmVccEtoeLoopbackCommand | read-write | current | A command to issue on the VCC Loopback. The start command is used to start an OAM F5 VCC loopback. The stop command is used to terminate the OAM loopback. The … |
| 1.3.6.1.4.1.321.100.1.25.3.1.1.19 | ColumnipadAtmVccEtoeLoopbackState | read-only | current | The state of this VCC loopback function. The active state means OAM F5 loopback cells are being sent from this endpoint once every 5 seconds. The loopback stat… |
| 1.3.6.1.4.1.321.100.1.25.3.1.1.20 | ColumnipadAtmVccEtoeLoopbackCellsTx | read-only | current | The number of OAM F5 Loopback cells transmitted for this VCC. |
| 1.3.6.1.4.1.321.100.1.25.3.1.1.21 | ColumnipadAtmVccEtoeLoopbackCellsRx | read-only | current | The number of OAM F5 Loopback cells received for this VCC. |
| 1.3.6.1.4.1.321.100.1.25.3.1.1.22 | ColumnipadAtmVccEtoeLoopbackRttMin | read-only | current | The minimum round trip time in milliseconds between sending a loopback cell and receiving the returned loopback cell. |
| 1.3.6.1.4.1.321.100.1.25.3.1.1.23 | ColumnipadAtmVccEtoeLoopbackRttMax | read-only | current | The maximum round trip time in milliseconds between sending a loopback cell and receiving the returned loopback cell. |
| 1.3.6.1.4.1.321.100.1.25.3.1.1.24 | ColumnipadAtmVccEtoeLoopbackRttAvg | read-only | current | The average round trip time in milliseconds between sending a loopback cell and receiving the returned loopback cell. |
| 1.3.6.1.4.1.321.100.1.25.3.1.1.25 | ColumnipadAtmVccSegLoopbackCommand | read-write | current | A command to issue on the VCC Loopback. The start command is used to start an OAM F5 VCC loopback. The stop command is used to terminate the OAM loopback. The … |
| 1.3.6.1.4.1.321.100.1.25.3.1.1.26 | ColumnipadAtmVccSegLoopbackState | read-only | current | The state of this VCC loopback function. The active state means OAM F5 loopback cells are being sent from this endpoint once every 5 seconds. The loopback stat… |
| 1.3.6.1.4.1.321.100.1.25.3.1.1.27 | ColumnipadAtmVccSegLoopbackCellsTx | read-only | current | The number of OAM F5 Loopback cells transmitted for this VCC. |
| 1.3.6.1.4.1.321.100.1.25.3.1.1.28 | ColumnipadAtmVccSegLoopbackCellsRx | read-only | current | The number of OAM F5 Loopback cells received for this VCC. |
| 1.3.6.1.4.1.321.100.1.25.3.1.1.29 | ColumnipadAtmVccSegLoopbackRttMin | read-only | current | The minimum round trip time in milliseconds between sending a loopback cell and receiving the returned loopback cell. |
| 1.3.6.1.4.1.321.100.1.25.3.1.1.30 | ColumnipadAtmVccSegLoopbackRttMax | read-only | current | The maximum round trip time in milliseconds between sending a loopback cell and receiving the returned loopback cell. |
| 1.3.6.1.4.1.321.100.1.25.3.1.1.31 | ColumnipadAtmVccSegLoopbackRttAvg | read-only | current | The average round trip time in milliseconds between sending a loopback cell and receiving the returned loopback cell. |
| 1.3.6.1.4.1.321.100.1.25.3.1.1.32 | ColumnipadAtmVccEtoeContCheckCommand | read-write | current | ipadAtmVccEtoeContCheckCommand is used to request activation or deactivation of the End-to-End continuity check on this VCC. |
| 1.3.6.1.4.1.321.100.1.25.3.1.1.33 | ColumnipadAtmVccEtoeContCheckAutoActivate | read-write | current | ipadAtmVccEtoeContCheckAutoActivate indicates whether End-to-End continuity check is automatically activated on this VCC. A Value of disable means CC is not au… |
| 1.3.6.1.4.1.321.100.1.25.3.1.1.34 | ColumnipadAtmVccEtoeContCheckType | read-only | current | Default Continuity Check Type used for this VCC. A value of none selects no continuity check. A value of sink, source, or sinkAndSource selects the respective … |
| 1.3.6.1.4.1.321.100.1.25.3.1.1.35 | ColumnipadAtmVccEtoeContCheckTypeInUse | read-only | current | The current Continuity Check Type in use for this VCC. ipadAtmVccEtoeContCheckTypeInUse may differ from ipadAtmVccEtoeContCheckType if CC is activated via inba… |
| 1.3.6.1.4.1.321.100.1.25.3.1.1.36 | ColumnipadAtmVccEtoeContCheckStatus | read-only | current | The current state of Continuity Check for this VCC. In the ready state, no CC is being performed. The ready state indicates CC is permitted to be activated. Th… |
| 1.3.6.1.4.1.321.100.1.25.3.1.1.37 | ColumnipadAtmVccEtoeContCheckCellsTx | read-only | current | The number of CC cells transmitted for this VCC for CC Sourcing function. |
| 1.3.6.1.4.1.321.100.1.25.3.1.1.38 | ColumnipadAtmVccEtoeContCheckCellsRx | read-only | current | The number of CC cells received for this VCC for the CC Sinking function. |
| 1.3.6.1.4.1.321.100.1.25.3.1.1.39 | ColumnipadAtmVccEtoeAisStatus | read-only | current | The current e-t-e_VC-AIS state. |
| 1.3.6.1.4.1.321.100.1.25.3.1.1.40 | ColumnipadAtmVccEtoeRdiStatus | read-only | current | The current e-t-e_VC-RDI state. |
| 1.3.6.1.4.1.321.100.1.25.4 | NodeipadAtmVccStatsParms | |||
| 1.3.6.1.4.1.321.100.1.25.4.1 | TableipadAtmVccStatsTable | not-accessible | current | Table of ATM statistics. |
| 1.3.6.1.4.1.321.100.1.25.4.1.1 | RowipadAtmVccStatsTableEntry | not-accessible | current | An entry in the ipad ATM VccStats parameter table. |
| 1.3.6.1.4.1.321.100.1.25.4.1.1.1 | ColumnipadAtmVccStatsIndex | read-only | current | The index representing the ATM interface. |
| 1.3.6.1.4.1.321.100.1.25.4.1.1.2 | ColumnipadAtmVccStatsVpiIndex | read-only | current | The index representing the VPI of the VCC. |
| 1.3.6.1.4.1.321.100.1.25.4.1.1.3 | ColumnipadAtmVccStatsVciIndex | read-only | current | The index representing the VCI of the VCC. |
| 1.3.6.1.4.1.321.100.1.25.4.1.1.4 | ColumnipadAtmVccStatsPeriodIndex | read-only | current | The index representing the period for the VCC stats entry. |
| 1.3.6.1.4.1.321.100.1.25.4.1.1.5 | ColumnipadAtmVccStatsTimeStamp | read-only | current | The value of sysUpTime the last time the statistics were updated. |
| 1.3.6.1.4.1.321.100.1.25.4.1.1.6 | ColumnipadAtmVccStatsRxFramesOK | read-only | current | The number of error-free frames received this period. |
| 1.3.6.1.4.1.321.100.1.25.4.1.1.7 | ColumnipadAtmVccStatsTxFramesOK | read-only | current | The number of frames successfully transmitted during this period. |
| 1.3.6.1.4.1.321.100.1.25.4.1.1.8 | ColumnipadAtmVccStatsRxFramesError | read-only | current | The number of errored frames received this period. |
| 1.3.6.1.4.1.321.100.1.25.4.1.1.9 | ColumnipadAtmVccStatsTxFramesError | read-only | current | The number of frames that were not successfully transmitted during this period. |
| 1.3.6.1.4.1.321.100.1.25.4.1.1.10 | ColumnipadAtmVccStatsRxFramesCLP | read-only | current | The number of frames received with CLP set during the period. |
| 1.3.6.1.4.1.321.100.1.25.4.1.1.11 | ColumnipadAtmVccStatsRxFramesCI | read-only | current | The number of frames received with congestion set during the period. |
| 1.3.6.1.4.1.321.100.1.25.4.1.1.12 | ColumnipadAtmVccStatsRxFramesAbort | read-only | current | The number of frames whose reception was aborted during the period. |
| 1.3.6.1.4.1.321.100.1.25.4.1.1.13 | ColumnipadAtmVccStatsRxFramesLenViolation | read-only | current | The number of frames received with a length violation during the period. |
| 1.3.6.1.4.1.321.100.1.25.4.1.1.14 | ColumnipadAtmVccStatsRxFramesCRCError | read-only | current | The number of frames received with CRC errors during the period. |
| 1.3.6.1.4.1.321.100.1.25.4.1.1.15 | ColumnipadAtmVccStatsRxFramesTimeout | read-only | current | The number of frames whose reception timed out during the period. |
| 1.3.6.1.4.1.321.100.1.25.4.1.1.16 | ColumnipadAtmVccStatsRxFramesHCSError | read-only | current | The number of frames received with an HCS error in a cell. |
| 1.3.6.1.4.1.321.100.1.25.4.1.1.17 | ColumnipadAtmVccStatsRxFramesNoBuffer | read-only | current | The number of frames discarded due to the lack of buffers. |
| 1.3.6.1.4.1.321.100.1.25.4.1.1.18 | ColumnipadAtmVccStatsRxCellsOK | read-only | current | The number of cells successfully received. |
| 1.3.6.1.4.1.321.100.1.25.4.1.1.19 | ColumnipadAtmVccStatsTxCellsOK | read-only | current | The number of cells successfully transmitted. |
| 1.3.6.1.4.1.321.100.1.25.4.1.1.20 | ColumnipadAtmVccStatsRxBytesOK | read-only | current | The number of bytes successfully received. |
| 1.3.6.1.4.1.321.100.1.25.4.1.1.21 | ColumnipadAtmVccStatsTxBytesOK | read-only | current | The number of bytes successfully transmitted. |
| 1.3.6.1.4.1.321.100.1.25.4.1.1.22 | ColumnipadAtmVccStatsDelayPeak | read-only | current | The peak delay measured during this period. |
| 1.3.6.1.4.1.321.100.1.25.4.1.1.23 | ColumnipadAtmVccStatsDelayAverage | read-only | current | The average delay measured during this period. |
| 1.3.6.1.4.1.321.100.1.25.4.1.1.24 | ColumnipadAtmVccStatsRoundTripTimeouts | read-only | current | The number of round trip delay message timeouts measured. |
| 1.3.6.1.4.1.321.100.1.25.4.1.1.25 | ColumnipadAtmVccStatsRemoteFramesOffered | read-only | current | The number of frames offered by the remote device. |
| 1.3.6.1.4.1.321.100.1.25.4.1.1.26 | ColumnipadAtmVccStatsFramesReceived | read-only | current | The number of frames received by the local device. |
| 1.3.6.1.4.1.321.100.1.25.4.1.1.27 | ColumnipadAtmVccStatsFDR | read-only | current | The calculated frame delivery ratio. |
| 1.3.6.1.4.1.321.100.1.25.4.1.1.28 | ColumnipadAtmVccStatsRemoteDataOffered | read-only | current | The number of data bytes offered by the remote device. |
| 1.3.6.1.4.1.321.100.1.25.4.1.1.29 | ColumnipadAtmVccStatsDataReceived | read-only | current | The number of data bytes received by the local device. |
| 1.3.6.1.4.1.321.100.1.25.4.1.1.30 | ColumnipadAtmVccStatsDDR | read-only | current | The calculated data delivery ratio. |
| 1.3.6.1.4.1.321.100.1.25.4.1.1.31 | ColumnipadAtmVccStatsUAS | read-only | current | The number of seconds which the remote device was unavailable. |
| 1.3.6.1.4.1.321.100.1.25.5 | NodeipadAtmCesParms | |||
| 1.3.6.1.4.1.321.100.1.25.5.1 | TableipadAtmCesTable | not-accessible | current | Table of CES parameters. |
| 1.3.6.1.4.1.321.100.1.25.5.1.1 | RowipadAtmCesTableEntry | not-accessible | current | An entry in the ipad ATM CES parameter table. |
| 1.3.6.1.4.1.321.100.1.25.5.1.1.1 | ColumnipadAtmCesIndex | read-only | current | The index into the ATM CES table. |
| 1.3.6.1.4.1.321.100.1.25.5.1.1.2 | ColumnipadAtmCesPayloadScrambling | read-write | current | ipadAtmCesPayloadScrambling indicates whether CES payload scrambling is enabled. |
| 1.3.6.1.4.1.321.100.1.25.5.1.1.3 | ColumnipadAtmCesAutoChannelConfiguration | read-write | current | ipadAtmCesAutoChannelConfiguration indicates whether the CES channel configuration should be dynamic based on available line bandwidth. |
| 1.3.6.1.4.1.321.100.1.25.6 | NodeipadAtmFrParms | |||
| 1.3.6.1.4.1.321.100.1.25.6.1 | TableipadAtmFrf5SvcTable | not-accessible | current | Table of ATM FRF5 profile parameters. |
| 1.3.6.1.4.1.321.100.1.25.6.1.1 | RowipadAtmFrf5SvcTableEntry | not-accessible | current | An entry in the ipad ATM FRF5 service table. |
| 1.3.6.1.4.1.321.100.1.25.6.1.1.1 | ColumnipadAtmFrf5SvcIfIndex | read-only | current | The index representing the ATM interface. |
| 1.3.6.1.4.1.321.100.1.25.6.1.1.2 | ColumnipadAtmFrf5SvcVpiIndex | read-only | current | The index representing the VPI of the VCC. |
| 1.3.6.1.4.1.321.100.1.25.6.1.1.3 | ColumnipadAtmFrf5SvcVciIndex | read-only | current | The index representing the VCI of the VCC. |
| 1.3.6.1.4.1.321.100.1.25.6.1.1.4 | ColumnipadAtmFrf5SvcDeToClpMappingMode | read-write | current | Discard Eligibility to Cell Loss Priority mapping mode. mode1: The Discard Eligibility (DE) field in the Q.922 core frame shall be copied unchanged into the DE… |
| 1.3.6.1.4.1.321.100.1.25.6.1.1.5 | ColumnipadAtmFrf5SvcClpToDeMappingMode | read-write | current | Cell Loss Priority to Discard Eligibility mapping mode. mode1: If one or more ATM cells belonging to a frame has its CLP field set to one or if the DE field of… |
| 1.3.6.1.4.1.321.100.1.25.6.1.1.6 | ColumnipadAtmFrf5SvcN1 | read-write | current | Number of keep alive requests between full status requests. |
| 1.3.6.1.4.1.321.100.1.25.6.1.1.7 | ColumnipadAtmFrf5SvcN2 | read-write | current | Number of errors before alarm. |
| 1.3.6.1.4.1.321.100.1.25.6.1.1.8 | ColumnipadAtmFrf5SvcN3 | read-write | current | Number of events to sample N2. |
| 1.3.6.1.4.1.321.100.1.25.6.1.1.9 | ColumnipadAtmFrf5SvcT1 | read-write | current | Delay before issuing a poll sequence. |
| 1.3.6.1.4.1.321.100.1.25.6.1.1.10 | ColumnipadAtmFrf5SvcT2 | read-write | current | T2 timer |
| 1.3.6.1.4.1.321.100.1.25.6.1.1.11 | ColumnipadAtmFrf5SvcActive | read-only | current | Specifies if the frf5 service is active. |
| 1.3.6.1.4.1.321.100.1.25.6.1.1.12 | ColumnipadAtmFrf5SvcAddDLCI | read-write | current | Identifies a DLCI number to be added. |
| 1.3.6.1.4.1.321.100.1.25.6.1.1.13 | ColumnipadAtmFrf5SvcDeleteDLCI | read-write | current | Identifies a DLCI number to be deleted. |
| 1.3.6.1.4.1.321.100.1.25.6.2 | TableipadAtmFrf5DlciTable | not-accessible | current | Table of Mapped DLCIs for VCCs. This table is used for FRF5 to map one or more DLCIs to a VCC. When only one DLCI is mapped, a one-to-one relationship exists b… |
| 1.3.6.1.4.1.321.100.1.25.6.2.1 | RowipadAtmFrf5DlciTableEntry | not-accessible | current | An entry in the ipad ATM Vcc parameter table. |
| 1.3.6.1.4.1.321.100.1.25.6.2.1.1 | ColumnipadAtmFrf5DlciIfIndex | read-only | current | The index into the ATM FRF5 DLCI table, corresponding to ifIndex. |
| 1.3.6.1.4.1.321.100.1.25.6.2.1.2 | ColumnipadAtmFrf5DlciVpiIndex | read-only | current | The VPI index into the ATM FRF5 DLCI table. |
| 1.3.6.1.4.1.321.100.1.25.6.2.1.3 | ColumnipadAtmFrf5DlciVciIndex | read-only | current | The VCI index into the ATM FRF5 DLCI table. |
| 1.3.6.1.4.1.321.100.1.25.6.2.1.4 | ColumnipadAtmFrf5DlciIndex | read-only | current | The DLCI index into the ATM FRF5 DLCI table. |
| 1.3.6.1.4.1.321.100.1.25.6.2.1.5 | ColumnipadAtmFrf5DlciEndpointName | read-write | current | Identifies the attached endpoint for this FRF5 DLCI. |
| 1.3.6.1.4.1.321.100.1.25.6.2.1.6 | ColumnipadAtmFrf5DlciStatus | read-only | current | The current status of this mapped entry. |
| 1.3.6.1.4.1.321.100.1.25.6.2.1.7 | ColumnipadAtmFrf5DlciCongestion | read-only | current | Specifies if the dlci is receiving frames with FECN or BECN bit set. |
| 1.3.6.1.4.1.321.100.1.25.6.3 | TableipadAtmFrf8SvcTable | not-accessible | current | Table of ATM FRF8 profile parameters. |
| 1.3.6.1.4.1.321.100.1.25.6.3.1 | RowipadAtmFrf8SvcTableEntry | not-accessible | current | An entry in the ipad ATM FRF8 service table. |
| 1.3.6.1.4.1.321.100.1.25.6.3.1.1 | ColumnipadAtmFrf8SvcIfIndex | read-only | current | The index representing the ATM interface. |
| 1.3.6.1.4.1.321.100.1.25.6.3.1.2 | ColumnipadAtmFrf8SvcVpiIndex | read-only | current | The index representing the VPI of the VCC. |
| 1.3.6.1.4.1.321.100.1.25.6.3.1.3 | ColumnipadAtmFrf8SvcVciIndex | read-only | current | The index representing the VCI of the VCC. |
| 1.3.6.1.4.1.321.100.1.25.6.3.1.4 | ColumnipadAtmFrf8SvcDeToClpMappingMode | read-write | current | This object describes which mode of translation is in use for loss priority mapping in the frame relay to ATM direction. mode1(1) = the DE field in the Q.922 c… |
| 1.3.6.1.4.1.321.100.1.25.6.3.1.5 | ColumnipadAtmFrf8SvcClpToDeMappingMode | read-write | current | This object describes which mode of translation is in use for loss priority mapping in the ATM to frame relay direction. mode1(1) = if one or more cells in a f… |
| 1.3.6.1.4.1.321.100.1.25.6.3.1.6 | ColumnipadAtmFrf8SvcCongestionMappingMode | read-write | current | This object describes which mode of translation is in use for forward congestion indication mapping in the frame relay to ATM direction. mode1(1) = The FECN fi… |
| 1.3.6.1.4.1.321.100.1.25.6.3.1.7 | ColumnipadAtmFrf8SvcEncapsulationMappingMode | read-write | current | This object indicates whether the mapping of upper layer protocol encapsulation is enabled on this interworking connection. transparentMode(1) = Forward the en… |
| 1.3.6.1.4.1.321.100.1.25.6.3.1.8 | ColumnipadAtmFrf8SvcEndpointName | read-write | current | Identifies the Frame Relay endpoint for this FRF8 Service. |