IPADv2-MIB

629 objects

IPADv2.MIB updated for SNMPv2.

Imported Objects

DS8200v2-MIB	-- -- import definitions for v2 traps -- eventually move the following to DS8200v2Traps-MIB -- serialDteDTRAlarmStatus ddsNetBPVCount ddsNetFDLCount ddsNetLOSCount ddsNetOOFCount ddsNetOOSCount t1e1AISCount t1e1BPVSCount t1e1CSSCount t1e1ESCount t1e1LOSSCount t1e1OOFSCount t1e1RASCount t1e1SESCount t1e1UASCount
DS8200v2-TC-MIB	hbu verilink
SNMPv2-SMI	enterprises IpAddress MODULE-IDENTITY NOTIFICATION-TYPE OBJECT-TYPE TimeTicks
SNMPv2-TC	DisplayString

OID	Name	Access	Status	Description
1.3.6.1.4.1.321.100.1	Identityipad			IPADv2.MIB updated for SNMPv2.
1.3.6.1.4.1.321.100.1.1	NodeipadFrPort
1.3.6.1.4.1.321.100.1.1.1	TableipadFrPortTable	not-accessible	current	Table of frame relay port parameters.
1.3.6.1.4.1.321.100.1.1.1.1	RowipadFrPortTableEntry	not-accessible	current	An entry in the ipad frame relay port table.
1.3.6.1.4.1.321.100.1.1.1.1.1	ColumnipadFrPortService	read-only	current	Index into the ipad frame relay port table; an entry in the ipad service table.
1.3.6.1.4.1.321.100.1.1.1.1.2	ColumnipadFrPortActive	read-only	current	Specifies if the port is active.
1.3.6.1.4.1.321.100.1.1.1.1.3	ColumnipadFrPortLMIType	read-only	current	Specifies the link management information type used on this port.
1.3.6.1.4.1.321.100.1.1.1.1.4	ColumnipadFrPortLMIMode	read-only	current	Specifies the link management information mode used on this port.
1.3.6.1.4.1.321.100.1.1.1.1.5	ColumnipadFrPortRxInvAlmThreshold	read-write	current	Sets the rx invalid frames alarm threshold. Setting this field to 0 disables the alarm.
1.3.6.1.4.1.321.100.1.1.1.1.6	ColumnipadFrPortRxInvAlmAlarm	read-only	current	Reports if the invalid frames threshold has been exceeded.
1.3.6.1.4.1.321.100.1.1.1.1.7	ColumnipadFrPortTxAlmThreshold	read-write	current	Sets the tx throughput alarm threshold (in bits/second). Setting this field to 0 disables the alarm.
1.3.6.1.4.1.321.100.1.1.1.1.8	ColumnipadFrPortTxAlmAlarm	read-only	current	Reports if the tx throughput threshold has been exceeded.
1.3.6.1.4.1.321.100.1.1.1.1.9	ColumnipadFrPortRxAlmThreshold	read-write	current	Sets the rx throughput alarm threshold (in bits/second). Setting this field to 0 disables the alarm.
1.3.6.1.4.1.321.100.1.1.1.1.10	ColumnipadFrPortRxAlmAlarm	read-only	current	Reports if the rx throughput threshold has been exceeded.
1.3.6.1.4.1.321.100.1.1.1.1.11	ColumnipadFrPortAlarmReset	read-write	current	This is used to clear the current alarm counts.
1.3.6.1.4.1.321.100.1.2	NodeipadService
1.3.6.1.4.1.321.100.1.2.1	TableipadServiceTable	not-accessible	current	The ipad service table.
1.3.6.1.4.1.321.100.1.2.1.1	RowipadServiceTableEntry	not-accessible	current	An entry in the ipad service table.
1.3.6.1.4.1.321.100.1.2.1.1.1	ColumnipadServiceIndex	read-only	current	The index for the ipad service table.
1.3.6.1.4.1.321.100.1.2.1.1.2	ColumnipadServiceifIndex	read-write	current	The MIB-II ifIndex for this service.
1.3.6.1.4.1.321.100.1.2.1.1.3	ColumnipadServiceType	read-write	current	The type of this service.
1.3.6.1.4.1.321.100.1.2.1.1.4	ColumnipadServicePair	read-write	current	An entry in this table, which establishes a service pairing.
1.3.6.1.4.1.321.100.1.2.1.1.5	ColumnipadServiceStatus	read-only	current	This parameter indicates the status of the service. idle - The service is not doing anything or has not been configured for use. down - The physical layer for …
1.3.6.1.4.1.321.100.1.2.2	ScalaripadServiceAddService	read-write	current	Adds a row to the Service Table.
1.3.6.1.4.1.321.100.1.2.3	ScalaripadServiceDeleteService	read-write	current	Identifies a Service to be deleted; an index into the Service Table.
1.3.6.1.4.1.321.100.1.3	NodeipadChannel
1.3.6.1.4.1.321.100.1.3.1	TableipadChannelTable	not-accessible	current	The ipad channel table.
1.3.6.1.4.1.321.100.1.3.1.1	RowipadChannelTableEntry	not-accessible	current	An entry in the ipad channel table.
1.3.6.1.4.1.321.100.1.3.1.1.1	ColumnipadChannelifIndex	read-only	current	Primary index into ipad channel table, MIB-II ifIndex.
1.3.6.1.4.1.321.100.1.3.1.1.2	ColumnipadChannelIndex	read-only	current	Channel index for the physical interface.
1.3.6.1.4.1.321.100.1.3.1.1.3	ColumnipadChannelService	read-write	current	Index into service table for this channel.
1.3.6.1.4.1.321.100.1.3.1.1.4	ColumnipadChannelPair	read-write	current	Pair for this channel; an entry in the channel table. Use service pair in service table to determine which service contains this channel.
1.3.6.1.4.1.321.100.1.3.1.1.5	ColumnipadChannelRate	read-write	current	Rate for this channel.
1.3.6.1.4.1.321.100.1.3.1.1.6	ColumnipadChannelIdlePattern	read-only	current	Idle pattern for this channel.
1.3.6.1.4.1.321.100.1.4	NodeipadDLCI
1.3.6.1.4.1.321.100.1.4.1	TableipadDLCITable	not-accessible	current	The ipad DLCI table.
1.3.6.1.4.1.321.100.1.4.1.1	RowipadDLCITableEntry	not-accessible	current	An entry in the ipad DLCI table.
1.3.6.1.4.1.321.100.1.4.1.1.1	ColumnipadDLCIservice	read-only	current	An index into the ipad service table.
1.3.6.1.4.1.321.100.1.4.1.1.2	ColumnipadDLCInumber	read-only	current	The DLCI number for this entry.
1.3.6.1.4.1.321.100.1.4.1.1.3	ColumnipadDLCIactive	read-only	current	Specifies if the DLCI is active.
1.3.6.1.4.1.321.100.1.4.1.1.4	ColumnipadDLCIcongestion	read-only	current	Specifies if the dlci is receiving frames with FECN or BECN bit set.
1.3.6.1.4.1.321.100.1.4.1.1.5	ColumnipadDLCIremote	read-only	current	Remote DLCI number.
1.3.6.1.4.1.321.100.1.4.1.1.6	ColumnipadDLCIremoteUnit	read-only	current	Name of the remote DLCI.
1.3.6.1.4.1.321.100.1.4.1.1.7	ColumnipadDLCIremoteEquipActive	read-only	current	Reports if the equipment attached to the remote unit is active.
1.3.6.1.4.1.321.100.1.4.1.1.8	ColumnipadDLCIencapsulation	read-write	current	Type of protocol encapsulation used on this DLCI.
1.3.6.1.4.1.321.100.1.4.1.1.9	ColumnipadDLCIproprietary	read-write	current	When the encapsulation is proprietary, the traffic type must be configured to gather protocol specific statistics.
1.3.6.1.4.1.321.100.1.4.1.1.10	ColumnipadDLCIpropOffset	read-write	current	When the encapsulation is proprietary, this is the number of bytes after the frame relay header to look for the specified protocol decode.
1.3.6.1.4.1.321.100.1.4.1.1.11	ColumnipadDLCIinBand	read-write	current	Determines if frames on this DLCI will be parsed to look for management frames destined for the unit itself.
1.3.6.1.4.1.321.100.1.4.1.1.12	ColumnipadDLCICIR	read-write	current	Default committed information rate in bits per second.
1.3.6.1.4.1.321.100.1.4.1.1.13	ColumnipadDLCIBe	read-write	current	Default excess burst rate in bits per second.
1.3.6.1.4.1.321.100.1.4.1.1.14	ColumnipadDLCIminBC	read-write	current	If the corresponding interface is configured to enable congestion management, the minimum transfer rate at which the unit will throttle back offering data to t…
1.3.6.1.4.1.321.100.1.4.1.1.15	ColumnipadDLCIrxMon	read-write	current	Determines if the SLA parameters will be monitored for received frames.
1.3.6.1.4.1.321.100.1.4.1.1.16	ColumnipadDLCIdEctrl	read-write	current	Determines if the Rx monitor will set the DE bit on all frames received in excess of the CIR before they are switched to their destination port.
1.3.6.1.4.1.321.100.1.4.1.1.17	ColumnipadDLCIenableDelay	read-write	current	Enable or disable delay.
1.3.6.1.4.1.321.100.1.4.1.1.18	ColumnipadDLCItxExCIRThreshold	read-write	current	Sets the Tx over CIR alarm threshold. This threshold is the number of bits per second in excess of CIR. Setting this field to 0 disables the alarm.
1.3.6.1.4.1.321.100.1.4.1.1.19	ColumnipadDLCItxExCIRAlarm	read-only	current	Reports if the Tx over CIR threshold has been exceeded.
1.3.6.1.4.1.321.100.1.4.1.1.20	ColumnipadDLCItxExBeThreshold	read-write	current	Sets the Tx over Be alarm threshold. This threshold is the number of bits per second in excess of Be. Setting this field to 0 disables the alarm.
1.3.6.1.4.1.321.100.1.4.1.1.21	ColumnipadDLCItxExBeAlarm	read-only	current	Reports if the Tx over Be threshold has been exceeded.
1.3.6.1.4.1.321.100.1.4.1.1.22	ColumnipadDLCIrxCongThreshold	read-write	current	Sets the Rx congestion alarm threshold. This threshold is the number of frames received with BECN/FECN. Setting this field to 0 disables the alarm.
1.3.6.1.4.1.321.100.1.4.1.1.23	ColumnipadDLCIrxCongAlarm	read-only	current	Reports if the Rx congestion threshold has been exceeded.
1.3.6.1.4.1.321.100.1.4.1.1.24	ColumnipadDLCIrxBECNinCIR	read-only	current	Reports if BECN has been received within CIR.
1.3.6.1.4.1.321.100.1.4.1.1.25	ColumnipadDLCIUASThreshold	read-write	current	Sets the UAS (unavailable seconds) alarm threshold. This threshold is the number of seconds passed that the DLCI is unavailable. Setting this field to 0 disabl…
1.3.6.1.4.1.321.100.1.4.1.1.26	ColumnipadDLCIUASAlarm	read-only	current	Reports if the UAS threshold has been exceeded.
1.3.6.1.4.1.321.100.1.4.1.1.27	ColumnipadDLCIAlarmReset	read-write	current	This is used to clear the current alarm counts.
1.3.6.1.4.1.321.100.1.4.1.1.28	ColumnipadDLCIRoundTripDelaySize	read-write	current	Specifies the packet size in octets used to calculate round trip delay.
1.3.6.1.4.1.321.100.1.4.1.1.29	ColumnipadDLCIRoundTripDelayRate	read-write	current	Specifies the packet rate in seconds used to calculate round trip delay.
1.3.6.1.4.1.321.100.1.4.1.1.30	ColumnipadDLCIRemoteFramesOfferedWithinCIR	read-only	current	Count of frames sent within CIR from the remote end of the DLCI.
1.3.6.1.4.1.321.100.1.4.1.1.31	ColumnipadDLCIRemoteFramesOfferedWithinBE	read-only	current	Count of frames sent within BE, but over CIR, from the remote end of the DLCI.
1.3.6.1.4.1.321.100.1.4.1.1.32	ColumnipadDLCIFramesReceived	read-only	current	Count of frames received by the local device on this DLCI.
1.3.6.1.4.1.321.100.1.4.1.1.33	ColumnipadDLCIRemoteDataOfferedWithinCIR	read-only	current	Count of data octets sent within CIR from the remote end of the DLCI.
1.3.6.1.4.1.321.100.1.4.1.1.34	ColumnipadDLCIRemoteDataOfferedWithinBE	read-only	current	Count of data octets sent within BE, but over CIR, from the remote end of the DLCI.
1.3.6.1.4.1.321.100.1.4.1.1.35	ColumnipadDLCIDataReceived	read-only	current	Count of data octets received by the local device on this DLCI.
1.3.6.1.4.1.321.100.1.4.1.1.36	ColumnipadDLCIRemoteIPAddress	read-only	current	The IP Address of the device on the remote end of this DLCI. This information is only valid when the remote device supports Verilink's proprietary message exch…
1.3.6.1.4.1.321.100.1.4.1.1.37	ColumnipadDLCICompressionStatus	read-only	current	This is the current status of the compression engine for this DLCI. disabled(2) indicates that the compression engine is disabled. enabledAndNegotiated(3) indi…
1.3.6.1.4.1.321.100.1.4.1.1.38	ColumnipadDLCICompressionTxOctetsIn	read-only	current	This is a rolling counter of the number of octets given to the compression engine.
1.3.6.1.4.1.321.100.1.4.1.1.39	ColumnipadDLCICompressionTxOctetsOut	read-only	current	This is a rolling counter of the number of octets output from the compression engine.
1.3.6.1.4.1.321.100.1.4.1.1.40	ColumnipadDLCICompressionRxOctetsIn	read-only	current	This is a rolling counter of the number of octets given to the compression engine.
1.3.6.1.4.1.321.100.1.4.1.1.41	ColumnipadDLCICompressionRxOctetsOut	read-only	current	This is a rolling counter of the number of octets given to the compression engine.
1.3.6.1.4.1.321.100.1.4.2	ScalaripadDLCILastChange	read-only	current	Time of the last change in the DLCI table.
1.3.6.1.4.1.321.100.1.5	NodeipadEndpoint
1.3.6.1.4.1.321.100.1.5.1	TableipadEndpointTable	not-accessible	current	The ipad endpoint table.
1.3.6.1.4.1.321.100.1.5.1.1	RowipadEndpointTableEntry	not-accessible	current	An entry in the ipad endpoint table.
1.3.6.1.4.1.321.100.1.5.1.1.1	ColumnipadEndpointIndex	read-only	current	The index into the ipad endpoint table.
1.3.6.1.4.1.321.100.1.5.1.1.2	ColumnipadEndpointName	read-write	current	The name for the endpoint.
1.3.6.1.4.1.321.100.1.5.1.1.3	ColumnipadEndpointService	read-write	current	An index into the ipad service table.
1.3.6.1.4.1.321.100.1.5.1.1.4	ColumnipadEndpointDLCInumber	read-write	current	Data link connection identifier for this endpoint; The DLCI number for this entry.
1.3.6.1.4.1.321.100.1.5.1.1.5	ColumnipadEndpointType	read-write	current	Endpoint type.
1.3.6.1.4.1.321.100.1.5.1.1.6	ColumnipadEndpointForward	read-write	current	Index into the endpoint names table. This is the endpoint on which data should be forwarded for switched endpoints.
1.3.6.1.4.1.321.100.1.5.1.1.7	ColumnipadEndpointBackup	read-write	current	Index into the endpoint table. This is the endpoint on which data should be forwarded in the case where the endpoint becomes inactive.
1.3.6.1.4.1.321.100.1.5.1.1.8	ColumnipadEndpointRefSLP	read-write	current	Index into the endpoint table. The service level parameters can be copied from another configured endpoint.
1.3.6.1.4.1.321.100.1.5.1.1.9	ColumnipadEndpointRemoteIpAddr	read-write	current	IP address for remote.
1.3.6.1.4.1.321.100.1.5.1.1.10	ColumnipadEndpointRemoteIpMask	read-write	current	IP address mask for remote.
1.3.6.1.4.1.321.100.1.5.2	ScalaripadEndpointAddEndpoint	read-write	current	Identifies an Endpoint to be added.
1.3.6.1.4.1.321.100.1.5.3	ScalaripadEndpointDeleteEndpoint	read-write	current	Identifies an Endpoint to be deleted.
1.3.6.1.4.1.321.100.1.5.4	ScalaripadEndpointLastChange	read-only	current	Time of the last change in the Endpoint table.
1.3.6.1.4.1.321.100.1.6	NodeipadUser
1.3.6.1.4.1.321.100.1.6.1	TableipadUserTable	not-accessible	current	Table of user selected parameters.
1.3.6.1.4.1.321.100.1.6.1.1	RowipadUserTableEntry	not-accessible	current	An entry in the ipad user table.
1.3.6.1.4.1.321.100.1.6.1.1.1	ColumnipadUserIndex	read-only	current	Index into the ipad user table.
1.3.6.1.4.1.321.100.1.6.1.1.2	ColumnipadUserFilterByDLCI	read-write	current	Enables Service+DLCI filtering for this user statistic.
1.3.6.1.4.1.321.100.1.6.1.1.3	ColumnipadUserService	read-write	current	Specifies the service for this user type; identifies an entry in the ipad DLCI table when combined with ipadUserDLCI. Meaningful when ipadUserFilterByDLCI is e…
1.3.6.1.4.1.321.100.1.6.1.1.4	ColumnipadUserDLCI	read-write	current	Specifies the DLCI for this user type; identifies an entry in the ipad DLCI table when combined with ipadUserService. Meaningful when ipadUserFilterByDLCI is e…
1.3.6.1.4.1.321.100.1.6.1.1.5	ColumnipadUserFilterByIPAddress	read-write	current	Enables IP address filtering for this user statistic. A packet is counted towards the user statistics if the result of a bitwise-and of an IP address in a tran…
1.3.6.1.4.1.321.100.1.6.1.1.6	ColumnipadUserIPAddress	read-write	current	Specifies the IP address for this user type.
1.3.6.1.4.1.321.100.1.6.1.1.7	ColumnipadUserIPMask	read-write	current	Specifies the IP address mask for this user type.
1.3.6.1.4.1.321.100.1.6.1.1.8	ColumnipadUserFilterByIPPort	read-write	current	Enables IP Port filtering for this user statistic.
1.3.6.1.4.1.321.100.1.6.1.1.9	ColumnipadUserIPPort	read-write	current	Specifies the IP port for this user type.
1.3.6.1.4.1.321.100.1.6.1.1.10	ColumnipadUserTxAlmThreshold	read-write	current	Sets the tx throughput alarm threshold in bits per second. Setting this field to 0 disables the alarm.
1.3.6.1.4.1.321.100.1.6.1.1.11	ColumnipadUserTxAlmAlarm	read-only	current	Reports if the tx throughput threshold has been exceeded.
1.3.6.1.4.1.321.100.1.6.1.1.12	ColumnipadUserAlarmReset	read-write	current	This is used to clear the current alarm counts.
1.3.6.1.4.1.321.100.1.6.1.1.13	ColumnipadUserVpi	read-write	current	Specifies the Vpi for this user type; identifies a VC when combined with the ipadUserService and ipadUserVci objects. Meaningful when ipadUserFilterByVpiVci is…
1.3.6.1.4.1.321.100.1.6.1.1.14	ColumnipadUserVci	read-write	current	Specifies the Vci for this user type; identifies a VC when combined with the ipadUserService and ipadUserVpi objects. Meaningful when ipadUserFilterByVpiVci is…
1.3.6.1.4.1.321.100.1.6.1.1.15	ColumnipadUserFilterByVpiVci	read-write	current	Enables Vpi/Vci filtering for this user statistic. A packet is counted towards the user statistics if the packet is transmitted on the service/Vpi/Vci combinda…
1.3.6.1.4.1.321.100.1.6.2	ScalaripadUserIPStatTimeRemaining	read-write	current	Specifies seconds until the next IP TopN report is generated.
1.3.6.1.4.1.321.100.1.6.3	ScalaripadUserIPStatTimeDuration	read-only	current	The value of TimeRemaining when TimeRemaining was last set. Indicates the number of seconds that the next IP TopN report will cover.
1.3.6.1.4.1.321.100.1.6.4	ScalaripadUserIPStatStartTime	read-only	current	The value of SysUpTime when TimeRemaining was last set.
1.3.6.1.4.1.321.100.1.6.5	ScalaripadUserIPStatRequestedReportSize	read-write	current	Determines the requested maximum number of entries in the topN report.
1.3.6.1.4.1.321.100.1.6.6	ScalaripadUserIPStatGrantedReportSize	read-only	current	Determines the granted number of entries in the topN report. This is by definition less than or equal to requested report size.
1.3.6.1.4.1.321.100.1.6.7	ScalaripadUserIPStatReportNumber	read-only	current	Specifies the number of reports that have been generated. This value resets to zero when the unit is restarted.
1.3.6.1.4.1.321.100.1.6.8	ScalaripadUserIPStatDiscardType	read-write	current	The internal table used to track TopN statistics is finite in size. On the condition when the internal table is full and a new IP address is encountered, an el…
1.3.6.1.4.1.321.100.1.7	NodeipadPPP
1.3.6.1.4.1.321.100.1.7.1	TableipadPPPCfgTable	not-accessible	current	The ipad PPP configuration table.
1.3.6.1.4.1.321.100.1.7.1.1	RowipadPPPCfgTableEntry	not-accessible	current	An entry in the ipad PPP configuration table.
1.3.6.1.4.1.321.100.1.7.1.1.1	ColumnipadPPPCfgService	read-only	current	The index into the PPP configuration table; an entry in the ipad service table.
1.3.6.1.4.1.321.100.1.7.1.1.2	ColumnipadPPPCfgDialMode	read-write	current	Determines the permancency of a communications connection.
1.3.6.1.4.1.321.100.1.7.1.1.3	ColumnipadPPPCfgInactivityTimer	read-write	current	Determines when a dial-up or demand-dial connection will be disconnected due to inactivity in both directions. When this parameter is set to zero then the time…
1.3.6.1.4.1.321.100.1.7.1.1.4	ColumnipadPPPCfgNegotiationInit	read-write	current	Determines if the port waits for the other end to initiate parameter negotiations.
1.3.6.1.4.1.321.100.1.7.1.1.5	ColumnipadPPPCfgMRU	read-write	current	The maximum receive unit the interface will accept. Valid values are in the range 128 - 4096, default is 1500.
1.3.6.1.4.1.321.100.1.7.1.1.6	ColumnipadPPPCfgACCM	read-write	current	Sets the async control character map used when generating async HDLC frames. Setting a bit in the map causes the corresponding character to be mapped for trans…
1.3.6.1.4.1.321.100.1.7.1.1.7	ColumnipadPPPCfgNegMRU	read-write	current	Determines if MRU size is negotiated.
1.3.6.1.4.1.321.100.1.7.1.1.8	ColumnipadPPPCfgNegACCM	read-write	current	Determines if ACCM is negotiated.
1.3.6.1.4.1.321.100.1.7.1.1.9	ColumnipadPPPCfgNegMagic	read-write	current	Determines if the magic number is negotiated.
1.3.6.1.4.1.321.100.1.7.1.1.10	ColumnipadPPPCfgNegCompression	read-write	current	Determines if the PPP protocol header compression is negotiated.
1.3.6.1.4.1.321.100.1.7.1.1.11	ColumnipadPPPCfgNegAddress	read-write	current	Determines if the PPP HDLC header compression is negotiated.
1.3.6.1.4.1.321.100.1.7.1.1.12	ColumnipadPPPCfgNegPAP	read-write	current	Determines if PAP is negotiated with the peer when a more secure authentication protocol is rejected.
1.3.6.1.4.1.321.100.1.7.1.1.13	ColumnipadPPPCfgNegCHAP	read-write	current	Determines if CHAP is negotiated with the peer when a more secure authentication protocol is rejected.
1.3.6.1.4.1.321.100.1.7.1.1.14	ColumnipadPPPCfgAllowPAP	read-write	current	Determines if PAP is allowed to be negotiated by the peer.
1.3.6.1.4.1.321.100.1.7.1.1.15	ColumnipadPPPCfgAllowCHAP	read-write	current	Determines if CHAP is allowed to be negotiated by the peer.
1.3.6.1.4.1.321.100.1.7.1.1.16	ColumnipadPPPCfgPAPUsername	read-write	current	Identification string to determine the user identity.
1.3.6.1.4.1.321.100.1.7.1.1.17	ColumnipadPPPCfgPAPPassword	read-write	current	Password string to validate the user identity.
1.3.6.1.4.1.321.100.1.7.1.1.18	ColumnipadPPPCfgCHAPUsername	read-write	current	Identification string to determine the user identity.
1.3.6.1.4.1.321.100.1.7.1.1.19	ColumnipadPPPCfgCHAPSecret	read-write	current	Password string to validate the user identity.
1.3.6.1.4.1.321.100.1.7.1.1.20	ColumnipadPPPCfgPortIpAddress	read-write	current	Sets the IP address of the unit's port.
1.3.6.1.4.1.321.100.1.7.1.1.21	ColumnipadPPPCfgPeerIpAddress	read-write	current	Sets the IP address of the unit's peer.
1.3.6.1.4.1.321.100.1.7.1.1.22	ColumnipadPPPCfgNegIpAddress	read-write	current	Determines if IP addresses are dynamically negotiated.
1.3.6.1.4.1.321.100.1.7.1.1.23	ColumnipadPPPCfgNegIPCPCompression	read-write	current	Determines if Van Jacobson TCPIP header compression is negotiated.
1.3.6.1.4.1.321.100.1.7.1.1.24	ColumnipadPPPCfgSubnetMask	read-write	current	Specifies the subnet mask.
1.3.6.1.4.1.321.100.1.7.1.1.25	ColumnipadPPPCfgAuthChallengeInterval	read-write	current	Specifies the authentication challenge interval.
1.3.6.1.4.1.321.100.1.7.1.1.26	ColumnipadPPPCfgEndpoint	read-write	current	Endpoint name to run PPP over another protocol.
1.3.6.1.4.1.321.100.1.7.1.1.27	ColumnipadPPPCfgNegIpMask	read-write	current	Determines if the subnet Mask is negotiated.
1.3.6.1.4.1.321.100.1.7.1.1.28	ColumnipadPPPCfgNegDNSAddress	read-write	current	Determines if the DNS address is negotiated.
1.3.6.1.4.1.321.100.1.7.2	TableipadPPPPAPTable	not-accessible	current	Table of PAP authentication parameters.
1.3.6.1.4.1.321.100.1.7.2.1	RowipadPPPPAPTableEntry	not-accessible	current	An entry in the ipad PPP PAP table.
1.3.6.1.4.1.321.100.1.7.2.1.1	ColumnipadPPPPAPTableIndex	read-only	current	The index into the PPP PAP association table.
1.3.6.1.4.1.321.100.1.7.2.1.2	ColumnipadPPPPAPTableUsername	read-write	current	Identification string to identify the user.
1.3.6.1.4.1.321.100.1.7.2.1.3	ColumnipadPPPPAPTablePassword	read-write	current	Password string to validate the user identity.
1.3.6.1.4.1.321.100.1.7.3	TableipadPPPCHAPTable	not-accessible	current	Table of CHAP authentication parameters.
1.3.6.1.4.1.321.100.1.7.3.1	RowipadPPPCHAPTableEntry	not-accessible	current	An entry in the ipad PPP CHAP table.
1.3.6.1.4.1.321.100.1.7.3.1.1	ColumnipadPPPCHAPTableIndex	read-only	current	The index into the PPP CHAP association table.
1.3.6.1.4.1.321.100.1.7.3.1.2	ColumnipadPPPCHAPTableUsername	read-write	current	Identification string to identify the user.
1.3.6.1.4.1.321.100.1.7.3.1.3	ColumnipadPPPCHAPTableSecret	read-write	current	Password string to validate the user identity.
1.3.6.1.4.1.321.100.1.8	NodeipadModem
1.3.6.1.4.1.321.100.1.8.1	TableipadModemDialTable	not-accessible	current	Table of modem dialing parameters.
1.3.6.1.4.1.321.100.1.8.1.1	RowipadModemDialTableEntry	not-accessible	current	An entry in the ipad modem dialing parameters table.
1.3.6.1.4.1.321.100.1.8.1.1.1	ColumnipadModemDialTableIndex	read-only	current	The index into the ipad modem dialing parameters table. Equivalent to MIB-II ifIndex.
1.3.6.1.4.1.321.100.1.8.1.1.2	ColumnipadModemDialDataIndex	read-write	current	An index into the Modem Data Table, which selects a modem.
1.3.6.1.4.1.321.100.1.8.1.1.3	ColumnipadModemDialNumber	read-write	current	Specifies the telephone number to dial.
1.3.6.1.4.1.321.100.1.8.1.1.4	ColumnipadModemDialAbortTimer	read-write	current	Aborts a connection attempt if a dial-up connection has failed to connect within the specified number of seconds. Range is 1..255.
1.3.6.1.4.1.321.100.1.8.1.1.5	ColumnipadModemDialRedialAttempts	read-write	current	Determines how many attempts to initiate a dial-up connection after the initial failure. Range is 0..10.
1.3.6.1.4.1.321.100.1.8.1.1.6	ColumnipadModemDialDelayBeforeRedial	read-write	current	Specifies the number of seconds to wait before redialing. Range is 1..255.
1.3.6.1.4.1.321.100.1.8.1.1.7	ColumnipadModemDialLoginScript	read-write	current	Script string interpreted after an originated dial-up connection is first established.
1.3.6.1.4.1.321.100.1.8.1.1.8	ColumnipadModemDialUsername	read-write	current	Identification string to determine the user identity.
1.3.6.1.4.1.321.100.1.8.1.1.9	ColumnipadModemDialPassword	read-write	current	Password string to validate the user identity.
1.3.6.1.4.1.321.100.1.8.1.1.10	ColumnipadModemDialChallengeScript	read-write	current	Script string interpreted after an answered dial-up connection is first established.
1.3.6.1.4.1.321.100.1.8.1.1.11	ColumnipadModemDialAnswerRings	read-write	current	Answers an incoming call on the given number of rings. A value of zero disables answering. Range is 0..255.
1.3.6.1.4.1.321.100.1.8.1.1.12	ColumnipadModemDialCommand	read-write	current	The set values perform the following actions: setupNow - Execute the modem setup scripts dialNow - Initiate dialing procedures answerNow - Initiate answering p…
1.3.6.1.4.1.321.100.1.8.1.1.13	ColumnipadModemDialStatus	read-only	current	This object reports the current activity of the modem control feature disabled - The feature is not enabled setup - The feature is configuring the modem error …
1.3.6.1.4.1.321.100.1.8.1.1.14	ColumnipadModemDialSecurity	read-write	current	disable - Dial-up security not enabled password - Challenge/Login password scripts used callback - Password security followed by answerer calling back callback…
1.3.6.1.4.1.321.100.1.8.1.1.15	ColumnipadModemDialCallbackRedialDelay	read-write	current	Specifies the number of seconds to wait before redialing. Range is 1..255.
1.3.6.1.4.1.321.100.1.8.1.1.16	ColumnipadModemDialCallbackTimeout	read-write	current	This object sets the number of seconds to wait for a security callback before failing the connection attempt.
1.3.6.1.4.1.321.100.1.8.1.1.17	ColumnipadModemDialCallbackChalScript	read-write	current	Callback security challenge script interpreted after originating a callback dial-up connection.
1.3.6.1.4.1.321.100.1.8.1.1.18	ColumnipadModemDialCallbackRspScript	read-write	current	Callback security challenge response script interpreted after answering a callback dial-up connection.
1.3.6.1.4.1.321.100.1.8.2	TableipadModemDataTable	not-accessible	current	Table of modem database parameters.
1.3.6.1.4.1.321.100.1.8.2.1	RowipadModemDataTableEntry	not-accessible	current	An entry in the ipad modem database parameters table.
1.3.6.1.4.1.321.100.1.8.2.1.1	ColumnipadModemDataTableIndex	read-only	current	The index into the ipad modem database parameters table.
1.3.6.1.4.1.321.100.1.8.2.1.2	ColumnipadModemDataModemName	read-write	current	Identification string for the modem database.
1.3.6.1.4.1.321.100.1.8.2.1.3	ColumnipadModemDataSetupScript	read-write	current	First script interpreted when a modem port is initialized.
1.3.6.1.4.1.321.100.1.8.2.1.4	ColumnipadModemDataDialingScript	read-write	current	Script interpreted when a dial-up connection is initiated.
1.3.6.1.4.1.321.100.1.8.2.1.5	ColumnipadModemDataAnswerScript	read-write	current	Script interpreted when a modem port decides to answer an incoming call.
1.3.6.1.4.1.321.100.1.8.2.1.6	ColumnipadModemDataHangupScript	read-write	current	Script interpreted when a dial-up connection is no longer needed.
1.3.6.1.4.1.321.100.1.8.2.1.7	ColumnipadModemDataSyncScript	read-write	current	Script interpreted to configure the modem to pass synchronous data.
1.3.6.1.4.1.321.100.1.8.2.1.8	ColumnipadModemDataSyncMethod	read-write	current	This object specifies how synchronous user data is passed to the modem. none - The modem does not support synchronous user data. sync - The modem directly supp…
1.3.6.1.4.1.321.100.1.8.2.1.9	ColumnipadModemDataSetupScript2	read-write	current	Second script interpreted when a modem port is initialized.
1.3.6.1.4.1.321.100.1.8.2.1.10	ColumnipadModemDataSetupScript3	read-write	current	Third script interpreted when a modem port is initialized.
1.3.6.1.4.1.321.100.1.8.2.1.11	ColumnipadModemDataSetupScript4	read-write	current	Fourth script interpreted when a modem port is initialized.
1.3.6.1.4.1.321.100.1.8.2.1.12	ColumnipadModemDataSetupScript5	read-write	current	Fifth script interpreted when a modem port is initialized.
1.3.6.1.4.1.321.100.1.8.3	TableipadDbuTable	not-accessible	current	The Dial Backup configuration table.
1.3.6.1.4.1.321.100.1.8.3.1	RowipadDbuTableEntry	not-accessible	current	An entry in the Dial Backup configuration table.
1.3.6.1.4.1.321.100.1.8.3.1.1	ColumnipadDbuIndex	read-only	current	An index into the Dial Backup configuration table. Equivalent to MIB-II ifIndex.
1.3.6.1.4.1.321.100.1.8.3.1.2	ColumnipadDbuOperation	read-write	current	This object specifes the basic operation of the Dial Backup feature. disable - Dial Backup is not to operate automatic - Dial Backup will start and end automat…
1.3.6.1.4.1.321.100.1.8.3.1.7	ColumnipadDbuMonitoredifIndex	read-write	current	Network MIB-II ifIndex monitored by Dial Backup.
1.3.6.1.4.1.321.100.1.8.3.1.8	ColumnipadDbuActivator1	read-write	current	This object specifies what will trigger a dial backup activation. disable - No alarm will trigger any - Trigger on any active alarm listed here carrier - Trigg…
1.3.6.1.4.1.321.100.1.8.3.1.9	ColumnipadDbuActivator2	read-write	current	This object specifies what will trigger a dial backup activation. disable - No alarm will trigger any - Trigger on any active alarm listed here carrier - Trigg…
1.3.6.1.4.1.321.100.1.8.3.1.10	ColumnipadDbuRevertDelay	read-write	current	This object specifies the number of seconds the dial backup activators must be continuously gone before the normal connection is restored.
1.3.6.1.4.1.321.100.1.8.3.1.11	ColumnipadDbuTrapDelay	read-write	current	This object specifies the number of seconds after entering the active state before sending the Dial Backup trap.
1.3.6.1.4.1.321.100.1.8.3.1.12	ColumnipadDbuStatus	read-only	current	This object reports the current activity of the Dial Backup feature disabled - The feature is not enabled setup - The feature is configuring the modem error - …
1.3.6.1.4.1.321.100.1.8.3.1.13	ColumnipadDbuTrap	read-write	current	Enable or disable the Dial Backup trap.
1.3.6.1.4.1.321.100.1.8.4	TableipadDbuDailyTable	not-accessible	current	The Daily Dial Backup Times Table.
1.3.6.1.4.1.321.100.1.8.4.1	RowipadDbuDailyTableEntry	not-accessible	current	An entry in the Daily Dial Backup Times Table.
1.3.6.1.4.1.321.100.1.8.4.1.1	ColumnipadDbuDailyIndex	read-only	current	An index into the Daily Dial Backup Times Table. Equivalent to MIB-II ifIndex.
1.3.6.1.4.1.321.100.1.8.4.1.2	ColumnipadDbuDailyDayOfWeek	read-only	current	This is the day of the week index into the Daily Dial Backup Times Table.
1.3.6.1.4.1.321.100.1.8.4.1.3	ColumnipadDbuDailyStart	read-write	current	This object is the beginning of a window for Dial Backup activation.
1.3.6.1.4.1.321.100.1.8.4.1.4	ColumnipadDbuDailyLength	read-write	current	This object is the size of a window for Dial Backup activation.
1.3.6.1.4.1.321.100.1.9	NodeipadSvcAware
1.3.6.1.4.1.321.100.1.9.1	TableipadFrPortStatsTable	not-accessible	current	Port statistics.
1.3.6.1.4.1.321.100.1.9.1.1	RowipadFrPortStatsEntry	not-accessible	current	An entry in the service aware ports statistics table.
1.3.6.1.4.1.321.100.1.9.1.1.1	ColumnipadFrPortStatsService	read-only	current	Port index in the ipadFrPortStats table; an entry in the ipad service table.
1.3.6.1.4.1.321.100.1.9.1.1.2	ColumnipadFrPortStatsPeriod	read-only	current	The index into the port stats 24-hour table.
1.3.6.1.4.1.321.100.1.9.1.1.3	ColumnipadFrPortStatsTxFrames	read-only	current	Number of transmitted frames for the period.
1.3.6.1.4.1.321.100.1.9.1.1.4	ColumnipadFrPortStatsRxFrames	read-only	current	Number of received frames for the period.
1.3.6.1.4.1.321.100.1.9.1.1.5	ColumnipadFrPortStatsTxOctets	read-only	current	Number of transmitted octets for the period.
1.3.6.1.4.1.321.100.1.9.1.1.6	ColumnipadFrPortStatsRxOctets	read-only	current	Number of received octets for the period.
1.3.6.1.4.1.321.100.1.9.1.1.7	ColumnipadFrPortStatsTxMgmtFrames	read-only	current	Number of transmitted management frames for the period.
1.3.6.1.4.1.321.100.1.9.1.1.8	ColumnipadFrPortStatsRxMgmtFrames	read-only	current	Number of received management frames for the period.
1.3.6.1.4.1.321.100.1.9.1.1.9	ColumnipadFrPortStatsTxMgmtOctets	read-only	current	Number of transmitted management octets for the period.
1.3.6.1.4.1.321.100.1.9.1.1.10	ColumnipadFrPortStatsRxMgmtOctets	read-only	current	Number of received management octets for the period.
1.3.6.1.4.1.321.100.1.9.1.1.11	ColumnipadFrPortStatsRxFECN	read-only	current	Number of received frames with FECN set for the period.
1.3.6.1.4.1.321.100.1.9.1.1.12	ColumnipadFrPortStatsRxBECN	read-only	current	Number of received frames with BECN set for the period.
1.3.6.1.4.1.321.100.1.9.1.1.13	ColumnipadFrPortStatsRxInvalid	read-only	current	Number of invalid received frames for the period.
1.3.6.1.4.1.321.100.1.9.1.1.14	ColumnipadFrPortStatsTxStatInq	read-only	current	Number of transmitted status inquiry frames for the period.
1.3.6.1.4.1.321.100.1.9.1.1.15	ColumnipadFrPortStatsRxStatInq	read-only	current	Number of received status inquiry frames for the period.
1.3.6.1.4.1.321.100.1.9.1.1.16	ColumnipadFrPortStatsTxStatResp	read-only	current	Number of transmitted status response frames for the period.
1.3.6.1.4.1.321.100.1.9.1.1.17	ColumnipadFrPortStatsRxStatResp	read-only	current	Number of received status response frames for the period.
1.3.6.1.4.1.321.100.1.9.1.1.18	ColumnipadFrPortStatsRxInvLMI	read-only	current	Number of received frames with an invalid LMI for the period.
1.3.6.1.4.1.321.100.1.9.1.1.19	ColumnipadFrPortStatsPeak	read-only	current	Peak throughput rate for the period (in bits/second).
1.3.6.1.4.1.321.100.1.9.1.1.20	ColumnipadFrPortStatsAverage	read-only	current	Average throughput rate for the period (in bits/second).
1.3.6.1.4.1.321.100.1.9.1.1.21	ColumnipadFrPortStatsTimeStamp	read-only	current	The value of sysUpTime the last time the statistics were updated.
1.3.6.1.4.1.321.100.1.9.1.1.22	ColumnipadFrPortStatsTxAvgPercent	read-only	current	Average Tx throughput percent for the period.
1.3.6.1.4.1.321.100.1.9.1.1.23	ColumnipadFrPortStatsTxMaxPercent	read-only	current	Maximum Tx throughput percent for the period.
1.3.6.1.4.1.321.100.1.9.1.1.24	ColumnipadFrPortStatsTxInstantPercent	read-only	current	Instantaneous Tx throughput percent for the period.
1.3.6.1.4.1.321.100.1.9.1.1.25	ColumnipadFrPortStatsTx20PercentSec	read-only	current	Number of seconds Tx throughput was 0-20% of bandwidth.
1.3.6.1.4.1.321.100.1.9.1.1.26	ColumnipadFrPortStatsTx40PercentSec	read-only	current	Number of seconds Tx throughput was 21-40% of bandwidth.
1.3.6.1.4.1.321.100.1.9.1.1.27	ColumnipadFrPortStatsTx60PercentSec	read-only	current	Number of seconds Tx throughput was 41-60% of bandwidth.
1.3.6.1.4.1.321.100.1.9.1.1.28	ColumnipadFrPortStatsTx80PercentSec	read-only	current	Number of seconds Tx throughput was 61-80% of bandwidth.
1.3.6.1.4.1.321.100.1.9.1.1.29	ColumnipadFrPortStatsTx100PercentSec	read-only	current	Number of seconds Tx throughput was 81-100% of bandwidth.
1.3.6.1.4.1.321.100.1.9.1.1.30	ColumnipadFrPortStatsRxAvgPercent	read-only	current	Average Rx throughput percent for the period.
1.3.6.1.4.1.321.100.1.9.1.1.31	ColumnipadFrPortStatsRxMaxPercent	read-only	current	Maximum Rx throughput percent for the period.
1.3.6.1.4.1.321.100.1.9.1.1.32	ColumnipadFrPortStatsRxInstantPercent	read-only	current	Instantaneous Rx throughput percent for the period.
1.3.6.1.4.1.321.100.1.9.1.1.33	ColumnipadFrPortStatsRx20PercentSec	read-only	current	Number of seconds Rx throughput was 0-20% of bandwidth.
1.3.6.1.4.1.321.100.1.9.1.1.34	ColumnipadFrPortStatsRx40PercentSec	read-only	current	Number of seconds Rx throughput was 21-40% of bandwidth.
1.3.6.1.4.1.321.100.1.9.1.1.35	ColumnipadFrPortStatsRx60PercentSec	read-only	current	Number of seconds Rx throughput was 41-60% of bandwidth.
1.3.6.1.4.1.321.100.1.9.1.1.36	ColumnipadFrPortStatsRx80PercentSec	read-only	current	Number of seconds Rx throughput was 61-80% of bandwidth.
1.3.6.1.4.1.321.100.1.9.1.1.37	ColumnipadFrPortStatsRx100PercentSec	read-only	current	Number of seconds Rx throughput was 81-100% of bandwidth.
1.3.6.1.4.1.321.100.1.9.1.1.38	ColumnipadFrPortStatsValidIntervals	read-only	current	Number of valid intervals in the table excluding the Summary and Current entries.
1.3.6.1.4.1.321.100.1.9.2	TableipadDLCIstatsTable	not-accessible	current	Port statistics.
1.3.6.1.4.1.321.100.1.9.2.1	RowipadDLCIstatsEntry	not-accessible	current	An entry in the service aware DLCI statistics table.
1.3.6.1.4.1.321.100.1.9.2.1.1	ColumnipadDLCIstatsService	read-only	current	The service index for the service aware stats table; identifies an entry in the ipad DLCI table when combined with ipadDLCIstatsDLCI.
1.3.6.1.4.1.321.100.1.9.2.1.2	ColumnipadDLCIstatsDLCI	read-only	current	The DLCI index for the service aware stats table; identifies an entry in the ipad DLCI table when combined with ipadDLCIstatsService.
1.3.6.1.4.1.321.100.1.9.2.1.3	ColumnipadDLCIstatsPeriod	read-only	current	The index into the DLCI stats 24-hour table.
1.3.6.1.4.1.321.100.1.9.2.1.4	ColumnipadDLCIstatsTxFrames	read-only	current	The number of transmitted frames for the period.
1.3.6.1.4.1.321.100.1.9.2.1.5	ColumnipadDLCIstatsRxFrames	read-only	current	The number of received frames for the period.
1.3.6.1.4.1.321.100.1.9.2.1.6	ColumnipadDLCIstatsTxOctets	read-only	current	The number of transmitted octets for the period.
1.3.6.1.4.1.321.100.1.9.2.1.7	ColumnipadDLCIstatsRxOctets	read-only	current	The number of received octets for the period.
1.3.6.1.4.1.321.100.1.9.2.1.8	ColumnipadDLCIstatsRxFECN	read-only	current	The number of received frames with FECN set for the period.
1.3.6.1.4.1.321.100.1.9.2.1.9	ColumnipadDLCIstatsRxBECN	read-only	current	The number of received frames with BECN set for the period.
1.3.6.1.4.1.321.100.1.9.2.1.10	ColumnipadDLCIstatsRxDE	read-only	current	The number of received frames with DE bit set for the period.
1.3.6.1.4.1.321.100.1.9.2.1.11	ColumnipadDLCIstatsTxExcessCIR	read-only	current	The number of transmitted octets in excess of CIR for the period.
1.3.6.1.4.1.321.100.1.9.2.1.12	ColumnipadDLCIstatsTxExcessBe	read-only	current	The number of transmitted octets in excess of Be for the period.
1.3.6.1.4.1.321.100.1.9.2.1.13	ColumnipadDLCIstatsTxMgmtFrames	read-only	current	The number of transmitted management frames for the period.
1.3.6.1.4.1.321.100.1.9.2.1.14	ColumnipadDLCIstatsRxMgmtFrames	read-only	current	The number of received management frames for the period.
1.3.6.1.4.1.321.100.1.9.2.1.15	ColumnipadDLCIstatsTxMgmtOctets	read-only	current	The number of transmitted management octets for the period.
1.3.6.1.4.1.321.100.1.9.2.1.16	ColumnipadDLCIstatsRxMgmtOctets	read-only	current	The number of received management octets for the period.
1.3.6.1.4.1.321.100.1.9.2.1.17	ColumnipadDLCIstatsPeak	read-only	current	Peak throughput rate for the period (in bits/second).
1.3.6.1.4.1.321.100.1.9.2.1.18	ColumnipadDLCIstatsAverage	read-only	current	Average throughput rate for the period (in bits/second).
1.3.6.1.4.1.321.100.1.9.2.1.19	ColumnipadDLCIstatsDelayPeak	read-only	current	Peak roundtrip delay for the period.
1.3.6.1.4.1.321.100.1.9.2.1.20	ColumnipadDLCIstatsDelayAverage	read-only	current	Average roundtrip delay for the period.
1.3.6.1.4.1.321.100.1.9.2.1.21	ColumnipadDLCIstatsRoundTripTimeouts	read-only	current	Number of timeouts on roundtrip delay for the period.
1.3.6.1.4.1.321.100.1.9.2.1.22	ColumnipadDLCIstatsUAS	read-only	current	Number of seconds the DLCI is unavailable.
1.3.6.1.4.1.321.100.1.9.2.1.23	ColumnipadDLCIstatsFdrCir	read-only	current
1.3.6.1.4.1.321.100.1.9.2.1.24	ColumnipadDLCIstatsDdrCir	read-only	current
1.3.6.1.4.1.321.100.1.9.2.1.25	ColumnipadDLCIstatsFdrBe	read-only	current
1.3.6.1.4.1.321.100.1.9.2.1.26	ColumnipadDLCIstatsDdrBe	read-only	current
1.3.6.1.4.1.321.100.1.9.2.1.27	ColumnipadDLCIstatsTimeStamp	read-only	current	The value of sysUpTime the last time the statistics were updated.
1.3.6.1.4.1.321.100.1.9.2.1.28	ColumnipadDLCIstatsRemoteFramesOfferedWithinCIR	read-only	current	Count of frames sent within CIR from the remote end of the DLCI.
1.3.6.1.4.1.321.100.1.9.2.1.29	ColumnipadDLCIstatsRemoteFramesOfferedWithinBE	read-only	current	Count of frames sent within BE, but over CIR, from the remote end of the DLCI.
1.3.6.1.4.1.321.100.1.9.2.1.30	ColumnipadDLCIstatsFramesReceived	read-only	current	Count of frames received by the local device on this DLCI.
1.3.6.1.4.1.321.100.1.9.2.1.31	ColumnipadDLCIstatsFDRCIR	read-only	current	Frame Delivery Ratio calculated within CIR.
1.3.6.1.4.1.321.100.1.9.2.1.32	ColumnipadDLCIstatsFDRBE	read-only	current	Frame Delivery Ratio caclulated within BE.
1.3.6.1.4.1.321.100.1.9.2.1.33	ColumnipadDLCIstatsRemoteDataOfferedWithinCIR	read-only	current	Count of data octets sent within CIR from the remote end of the DLCI.
1.3.6.1.4.1.321.100.1.9.2.1.34	ColumnipadDLCIstatsRemoteDataOfferedWithinBE	read-only	current	Count of data octets sent within BE, but over CIR, from the remote end of the DLCI.
1.3.6.1.4.1.321.100.1.9.2.1.35	ColumnipadDLCIstatsDataReceived	read-only	current	Count of data octets received by the local device on this DLCI.
1.3.6.1.4.1.321.100.1.9.2.1.36	ColumnipadDLCIstatsDDRCIR	read-only	current	Data Delivery Ratio calculated within CIR.
1.3.6.1.4.1.321.100.1.9.2.1.37	ColumnipadDLCIstatsDDRBE	read-only	current	Data Delivery Ratio caclulated within BE.
1.3.6.1.4.1.321.100.1.9.2.1.38	ColumnipadDLCIstatsAvgPercent	read-only	current	Average throughput percent for the period.
1.3.6.1.4.1.321.100.1.9.2.1.39	ColumnipadDLCIstatsMaxPercent	read-only	current	Maximum throughput percent for the period.
1.3.6.1.4.1.321.100.1.9.2.1.40	ColumnipadDLCIstatsInstantPercent	read-only	current	Instantaneous throughput percent for the period.
1.3.6.1.4.1.321.100.1.9.2.1.41	ColumnipadDLCIstats20PercentSec	read-only	current	Number of seconds throughput was 0-20% of bandwidth.
1.3.6.1.4.1.321.100.1.9.2.1.42	ColumnipadDLCIstats40PercentSec	read-only	current	Number of seconds throughput was 21-40% of bandwidth.
1.3.6.1.4.1.321.100.1.9.2.1.43	ColumnipadDLCIstats60PercentSec	read-only	current	Number of seconds throughput was 41-60% of bandwidth.
1.3.6.1.4.1.321.100.1.9.2.1.44	ColumnipadDLCIstats80PercentSec	read-only	current	Number of seconds throughput was 61-80% of bandwidth.
1.3.6.1.4.1.321.100.1.9.2.1.45	ColumnipadDLCIstats100PercentSec	read-only	current	Number of seconds throughput was 81-100% of bandwidth.
1.3.6.1.4.1.321.100.1.9.2.1.46	ColumnipadDLCIstatsValidIntervals	read-only	current	Number of valid intervals in the table excluding the Summary and Current entries.
1.3.6.1.4.1.321.100.1.9.2.1.47	ColumnipadDLCIstatsCompressionTxOctetsIn	read-only	current	Number of octets passed into the compression engine.
1.3.6.1.4.1.321.100.1.9.2.1.48	ColumnipadDLCIstatsCompressionTxOctetsOut	read-only	current	Number of octets passed out of the compression engine.
1.3.6.1.4.1.321.100.1.9.2.1.49	ColumnipadDLCIstatsCompressionRxOctetsIn	read-only	current	Number of octets passed into the compression engine.
1.3.6.1.4.1.321.100.1.9.2.1.50	ColumnipadDLCIstatsCompressionRxOctetsOut	read-only	current	Number of octets passed out of the compression engine.
1.3.6.1.4.1.321.100.1.9.2.1.51	ColumnipadDLCIstatsCompressionTxRatio	read-only	current	Compression Ratio calculated in the transmit direction.
1.3.6.1.4.1.321.100.1.9.2.1.52	ColumnipadDLCIstatsCompressionRxRatio	read-only	current	Compression Ratio calculation in the receive direction.
1.3.6.1.4.1.321.100.1.9.3	TableipadUserStatsTable	not-accessible	current	User-selected protocol statistics.
1.3.6.1.4.1.321.100.1.9.3.1	RowipadUserStatsEntry	not-accessible	current	An entry in the user statistics table.
1.3.6.1.4.1.321.100.1.9.3.1.1	ColumnipadUserStatsIndex	read-only	current	Index into the user statistics table.
1.3.6.1.4.1.321.100.1.9.3.1.2	ColumnipadUserStatsPeriod	read-only	current	The index into the user stats 24-hour table.
1.3.6.1.4.1.321.100.1.9.3.1.3	ColumnipadUserStatsTxFrames	read-only	current	Number of transmitted frames for the period.
1.3.6.1.4.1.321.100.1.9.3.1.4	ColumnipadUserStatsRxFrames	read-only	current	Number of received frames for the period.
1.3.6.1.4.1.321.100.1.9.3.1.5	ColumnipadUserStatsTxOctets	read-only	current	Number of transmitted octets for the period.
1.3.6.1.4.1.321.100.1.9.3.1.6	ColumnipadUserStatsRxOctets	read-only	current	Number of received octets for the period.
1.3.6.1.4.1.321.100.1.9.3.1.7	ColumnipadUserStatsTxRatePeak	read-only	current	Peak throughput rate for the period (in bits/second).
1.3.6.1.4.1.321.100.1.9.3.1.8	ColumnipadUserStatsTxRateAverage	read-only	current	Average throughput rate for the period (in bits/second).
1.3.6.1.4.1.321.100.1.9.3.1.9	ColumnipadUserStatsTimeStamp	read-only	current	The value of sysUpTime the last time the statistics were updated.
1.3.6.1.4.1.321.100.1.9.4	TableipadIPTopNStatsTable	not-accessible	current	IP TopN statistics.
1.3.6.1.4.1.321.100.1.9.4.1	RowipadIPTopNStatsEntry	not-accessible	current	An entry in the user statistics table.
1.3.6.1.4.1.321.100.1.9.4.1.1	ColumnipadIPTopNStatsIndex	read-only	current	Index into the IP TopN statistics table.
1.3.6.1.4.1.321.100.1.9.4.1.2	ColumnipadIPTopNStatsAddress	read-only	current	IP address of this entry.
1.3.6.1.4.1.321.100.1.9.4.1.3	ColumnipadIPTopNStatsTimestamp	read-only	current	Time of last IP frame for this entry.
1.3.6.1.4.1.321.100.1.9.4.1.4	ColumnipadIPTopNStatsRxFrames	read-only	current	Number of received IP frames for this entry.
1.3.6.1.4.1.321.100.1.9.4.1.5	ColumnipadIPTopNStatsRxOctets	read-only	current	Number of received IP octets for this entry.
1.3.6.1.4.1.321.100.1.9.4.1.6	ColumnipadIPTopNStatsTxFrames	read-only	current	Number of transmitted IP frames for this entry.
1.3.6.1.4.1.321.100.1.9.4.1.7	ColumnipadIPTopNStatsTxOctets	read-only	current	Number of transmitted IP octets for this entry.
1.3.6.1.4.1.321.100.1.10	NodeipadPktSwitch
1.3.6.1.4.1.321.100.1.10.1	ScalaripadPktSwOperatingMode	read-write	current	Selects overall mode of operation.
1.3.6.1.4.1.321.100.1.10.2	TableipadPktSwCfgTable	not-accessible	current	The ipad packet switch configuration table.
1.3.6.1.4.1.321.100.1.10.2.1	RowipadPktSwCfgTableEntry	not-accessible	current	An entry in the ipad packet switch configuration table.
1.3.6.1.4.1.321.100.1.10.2.1.1	ColumnipadPktSwCfgService	read-only	current	The index into the packet switch configuration table; an entry in the ipad Service table.
1.3.6.1.4.1.321.100.1.10.2.1.2	ColumnipadPktSwCfgInterfaceType	read-write	current	Network ports should be set to User Network Interface (uni) and user ports should be set to Network Interface (ni).
1.3.6.1.4.1.321.100.1.10.2.1.3	ColumnipadPktSwCfgLnkMgmtType	read-write	current	If set to auto, the frame relay LMI type will be learned from the network side. If set to none, all DLCI must be configured.
1.3.6.1.4.1.321.100.1.10.2.1.4	ColumnipadPktSwCfgMaxFrameSize	read-write	current	This is the maximum frame size configured in the frame relay network.
1.3.6.1.4.1.321.100.1.10.2.1.5	ColumnipadPktSwCfgnN1	read-write	current	Number of keep alive requests between full status request.
1.3.6.1.4.1.321.100.1.10.2.1.6	ColumnipadPktSwCfgnN2	read-write	current	Number of errors from FRAD before alarm.
1.3.6.1.4.1.321.100.1.10.2.1.7	ColumnipadPktSwCfgnN3	read-write	current	Number of events to sample nN2.
1.3.6.1.4.1.321.100.1.10.2.1.8	ColumnipadPktSwCfgnT1	read-write	current	Delay before issuing a poll sequence.
1.3.6.1.4.1.321.100.1.10.2.1.9	ColumnipadPktSwCfgDefCIR	read-write	current	Default committed information rate in bits per second.
1.3.6.1.4.1.321.100.1.10.2.1.10	ColumnipadPktSwCfgDefExBurst	read-write	current	Default excess burst rate in bits per second.
1.3.6.1.4.1.321.100.1.10.2.1.11	ColumnipadPktSwCfgCIREE	read-write	current	Determines if the interface will enforce CIR and excess burst configured values.
1.3.6.1.4.1.321.100.1.10.2.1.12	ColumnipadPktSwCfgLinkInjection	read-write	current	Indicates how to process frames in excess of the CIR when congestion exists.
1.3.6.1.4.1.321.100.1.10.2.1.13	ColumnipadPktSwCfgAutoDiagnostic	read-write	current	Determines if the unit will put itself into diagnostic mode everytime it determines that there are no LMI received on a network service.
1.3.6.1.4.1.321.100.1.10.2.1.14	ColumnipadPktSwCfgAutoDiscovery	read-write	current	Determines if the unit will learn the DLCIs from the LMMI received on this service.
1.3.6.1.4.1.321.100.1.10.2.1.15	ColumnipadPktSwCfgMgmtDLCI	read-write	current	Specifies the DLCI that will be used by the unit for management information. Specifying a 0 disables this feature.
1.3.6.1.4.1.321.100.1.10.2.1.16	ColumnipadPktSwCfgRoundTripDelaySize	read-write	current	Specifies the packet size in octets used to calculate round trip delay.
1.3.6.1.4.1.321.100.1.10.2.1.17	ColumnipadPktSwCfgRoundTripDelayRate	read-write	current	Specifies the packet rate in seconds used to calculate round trip delay.
1.3.6.1.4.1.321.100.1.10.2.1.18	ColumnipadPktSwCfgAutoIPMgmtAddr	read-write	current	Look for DLCI (980-995) and uses its IP address.
1.3.6.1.4.1.321.100.1.10.2.1.19	ColumnipadPktSwCfgNormalTxQueueSize	read-write	current	The depth of the normal priority tx queue. This size determines the max number of low priority packets that can be queued in front of high priority traffic.
1.3.6.1.4.1.321.100.1.10.2.1.20	ColumnipadPktSwCfgAddDLCI	read-write	current	Identifies a DLCI number to be added.
1.3.6.1.4.1.321.100.1.10.2.1.21	ColumnipadPktSwCfgDeleteDLCI	read-write	current	Identifies a DLCI number to be deleted.
1.3.6.1.4.1.321.100.1.11	NodeipadTrapDest
1.3.6.1.4.1.321.100.1.11.1	TableipadTrapDestTable	not-accessible	current	The ipad trap destination table.
1.3.6.1.4.1.321.100.1.11.1.1	RowipadTrapDestTableEntry	not-accessible	current	An entry in the ipad trap destination table.
1.3.6.1.4.1.321.100.1.11.1.1.1	ColumnipadTrapDestIndex	read-only	current	Index into the ipad trap destination table.
1.3.6.1.4.1.321.100.1.11.1.1.2	ColumnipadTrapDestination	read-write	current	Trap destination.
1.3.6.1.4.1.321.100.1.12	NodeipadMisc
1.3.6.1.4.1.321.100.1.12.1	TableipadMiscPortSettings	not-accessible	current	The ipad miscellaneous port settings table.
1.3.6.1.4.1.321.100.1.12.1.1	RowipadMiscPortSettingsEntry	not-accessible	current	An entry in the ipad miscellaneous port settings table.
1.3.6.1.4.1.321.100.1.12.1.1.1	ColumnipadMiscPortSettingsIndex	read-only	current	The MIB-II ifIndex for this port.
1.3.6.1.4.1.321.100.1.12.1.1.2	ColumnipadMiscPortSettingsSerialType	read-write	current	The type of this serial port.
1.3.6.1.4.1.321.100.1.12.1.1.3	ColumnipadMiscPortSettingsModemControl	read-write	current	Request the attached service to use the modem dialing control feature.
1.3.6.1.4.1.321.100.1.12.2	ScalaripadMiscClearStatusCounts	read-write	current	Writing a 2 to this field will clear all status counts.
1.3.6.1.4.1.321.100.1.12.3	ScalaripadMiscEnableServiceAware	read-write	current	Writing a 3 to this field will enable service aware statistics gathering.
1.3.6.1.4.1.321.100.1.12.4	TableipadMiscShdslConfigTable	not-accessible	current	The ipad miscellaneous SHDSL configuration table.
1.3.6.1.4.1.321.100.1.12.4.1	RowipadMiscShdslConfigEntry	not-accessible	current	An entry in the ipad miscellaneous SHDSL configuration table.
1.3.6.1.4.1.321.100.1.12.4.1.1	ColumnipadMiscShdslConfigIndex	read-only	current	This object is the index into the SHDSL configuration table.
1.3.6.1.4.1.321.100.1.12.4.1.2	ColumnipadMiscShdslTerminalType	read-write	current	Selects whether the tu is a central or remote site terminal unit. Applicable to HDSL2/SHDSL only.
1.3.6.1.4.1.321.100.1.12.4.1.3	ColumnipadMiscShdslTiming	read-write	current	Sets the timing source to synchronize the unit's internal timing generators.
1.3.6.1.4.1.321.100.1.12.4.1.4	ColumnipadMiscShdslStationInTiming	read-write	current	Selects the input timing if SHDSLTiming is set to Station.
1.3.6.1.4.1.321.100.1.12.4.1.5	ColumnipadMiscShdslStationTimingNxMultiple	read-write	current	Selects the N-multiple when Station Input Timing is set to either NX56 or NX65.
1.3.6.1.4.1.321.100.1.12.4.1.6	ColumnipadMiscShdslAutomaticRetrain	read-write	current	Enable or disable automatic line retraining when needed. Enable is the default. Disable is used for PSD measurement.
1.3.6.1.4.1.321.100.1.12.5	TableipadMiscShdslStatusTable	not-accessible	current	The ipad miscellaneous SHDSL status table.
1.3.6.1.4.1.321.100.1.12.5.1	RowipadMiscShdslStatusEntry	not-accessible	current	An entry in the ipad miscellaneous SHDSL status table.
1.3.6.1.4.1.321.100.1.12.5.1.1	ColumnipadMiscShdslStatusIndex	read-only	current	This object is the index into the SHDSL configuration table.
1.3.6.1.4.1.321.100.1.12.5.1.2	ColumnipadMiscShdslConnectionStatus	read-only	current	This object displays the connection status of Wire Pair 1 of an SHDSL connection.
1.3.6.1.4.1.321.100.1.12.5.1.3	ColumnipadMiscShdslDetailedConnectionStatus	read-only	current	This object displays the detailed connection status of Wire Pair 1 of an SHDSL connection.
1.3.6.1.4.1.321.100.1.12.5.1.4	ColumnipadMiscShdslEOCInMessages	read-only	current	This object displays the number of EOC messages received.
1.3.6.1.4.1.321.100.1.12.5.1.5	ColumnipadMiscShdslEOCOutMessages	read-only	current	This object displays the number of EOC messages transmitted.
1.3.6.1.4.1.321.100.1.12.5.1.6	ColumnipadMiscShdslConnectionStatusPair2	read-only	current	This object displays the connection status of Wire Pair 2 of an SHDSL connection.
1.3.6.1.4.1.321.100.1.12.5.1.7	ColumnipadMiscShdslDetailedConnectionStatusPair2	read-only	current	This object displays the detailed connection status of Wire Pair 2 of an SHDSL connection.
1.3.6.1.4.1.321.100.1.12.6	ScalaripadMiscEnableSupervisoryPort	read-write	current	Writing a 2 to this field will disable VT100 and telnet. Writing a 3 to this field will enable VT100 and telnet.
1.3.6.1.4.1.321.100.1.12.7	ScalaripadMiscEnableButtons	read-write	current	Writing a 2 to this field will disable the buttons. Writing a 3 to this field will enable the buttons.
1.3.6.1.4.1.321.100.1.12.8	ScalaripadMiscBootupConsoleAvail	read-write	current	Writing a 2 to this field will disable the console port for diagnostic messages. Writing a 3 to this field will enable these messages.
1.3.6.1.4.1.321.100.1.12.9	ScalaripadMiscEnableLEDs	read-write	current	Writing a 2 to this field will disable the LEDs. Writing a 3 to this field will enable the LEDs.
1.3.6.1.4.1.321.100.1.12.10	ScalaripadMiscDisableLAN	read-write	current	This parameter defines the setup of the Ethernet LAN port. disable(2) - Disable the Ethernet LAN Port. enable(3) - Enable the Ethernet LAN port and auto-negoti…
1.3.6.1.4.1.321.100.1.12.11	ScalaripadMiscLANStatus	read-only	current	This parameter defines the setup of the Ethernet LAN port. down(1) - Port has not negotiated. half10(2) - Port negotiated 10 Mbps and half-duplex. full10(3) - …
1.3.6.1.4.1.321.100.1.13	NodeipadRouter
1.3.6.1.4.1.321.100.1.14	NodeipadSoftKey
1.3.6.1.4.1.321.100.1.14.1	TableipadSoftKeyTable	not-accessible	current	Table of software keys.
1.3.6.1.4.1.321.100.1.14.1.1	RowipadSoftKeyTableEntry	not-accessible	current	An entry in the software key table.
1.3.6.1.4.1.321.100.1.14.1.1.1	ColumnipadSoftKeyIndex	read-only	current	Index into the ipad software key table.
1.3.6.1.4.1.321.100.1.14.1.1.2	ColumnipadSoftKeyAcronym	read-only	current	Three-letter acronym for software key.
1.3.6.1.4.1.321.100.1.14.1.1.3	ColumnipadSoftKeyDescription	read-only	current	Description, if available, of this software key.
1.3.6.1.4.1.321.100.1.14.1.1.4	ColumnipadSoftKeyExpirationDate	read-only	current	Expiration date of this software key in the format YY/MM/DD.
1.3.6.1.4.1.321.100.1.14.2	ScalaripadSoftKeyEntry	read-write	current	Writing a software key will enable that feature (assuming a correct and valid key is entered).
1.3.6.1.4.1.321.100.1.15	NodeipadTCPServer
1.3.6.1.4.1.321.100.1.15.1	ScalaripadTCPServerEnable	read-write	current	Enables/disables the TCP Server.
1.3.6.1.4.1.321.100.1.15.2	TableipadTCPServerConnTable	not-accessible	current	Table of TCP Server connections.
1.3.6.1.4.1.321.100.1.15.2.1	RowipadTCPServerConnTableEntry	not-accessible	current	An entry in the TCP Server connection table.
1.3.6.1.4.1.321.100.1.15.2.1.1	ColumnipadTCPServerConnIndex	read-only	current	Index into the ipad TCP Server Connection table.
1.3.6.1.4.1.321.100.1.15.2.1.2	ColumnipadTCPServerConnEndpoint	read-write	current	Identifies the endpoint for this connection.
1.3.6.1.4.1.321.100.1.15.2.1.3	ColumnipadTCPServerConnLocalPort	read-write	current	Identifies the TCP port for this connection (default: 2000).
1.3.6.1.4.1.321.100.1.15.2.1.4	ColumnipadTCPServerConnEnableEntry	read-write	current	Enables or disables this entry.
1.3.6.1.4.1.321.100.1.15.3	ScalaripadTCPServerAddConnEntry	read-write	current	Writing addnew(2) to this field causes a new (blank) connection to be appended to the TCP Server Table.
1.3.6.1.4.1.321.100.1.15.4	ScalaripadTCPServerDeleteConnEntry	read-write	current	Identifies a connection table entry to be deleted.
1.3.6.1.4.1.321.100.1.15.5	TableipadTCPServerHostAccessTable	not-accessible	current	Table of TCP Server IP Host Access List.
1.3.6.1.4.1.321.100.1.15.5.1	RowipadTCPServerHostAccessTableEntry	not-accessible	current	An entry in the TCP Server Host Access List table.
1.3.6.1.4.1.321.100.1.15.5.1.1	ColumnipadTCPServerHostAccessIndex	read-only	current	Index into the ipad trap destination table.
1.3.6.1.4.1.321.100.1.15.5.1.2	ColumnipadTCPServerHostAccessIPAddr	read-write	current	Trap destination.
1.3.6.1.4.1.321.100.1.16	NodeipadSCADAConfig
1.3.6.1.4.1.321.100.1.16.1	TableipadSCADAConfigTable	not-accessible	current	The SCADA config table.
1.3.6.1.4.1.321.100.1.16.1.1	RowipadSCADAConfigTableEntry	not-accessible	current	An entry in the SCADA config table.
1.3.6.1.4.1.321.100.1.16.1.1.1	ColumnipadSCADACfgIndex	read-only	current	The index for SCADA config table.
1.3.6.1.4.1.321.100.1.16.1.1.2	ColumnipadSCADACfgMessageSize	read-write	current	The SCADA message size.
1.3.6.1.4.1.321.100.1.16.1.1.3	ColumnipadSCADACfgIdleCharDelay	read-write	current	The SCADA idle character delay.
1.3.6.1.4.1.321.100.1.16.1.1.4	ColumnipadSCADACfgInputTerminator	read-write	current	The SCADA input message terminator.
1.3.6.1.4.1.321.100.1.16.1.1.5	ColumnipadSCADACfgAddDevLst	read-write	current	Appends an entry to the SCADA device list table.
1.3.6.1.4.1.321.100.1.16.1.1.6	ColumnipadSCADACfgDeleteDevLst	read-write	current	Deletes an entry in the SCADA device list table.
1.3.6.1.4.1.321.100.1.16.1.1.7	ColumnipadSCADACfgDataDirection	read-write	current	Data Direction enables for SCADA configuration.
1.3.6.1.4.1.321.100.1.16.1.1.8	ColumnipadSCADACfgProtocol	read-write	current	Configured SCADA Protocol.
1.3.6.1.4.1.321.100.1.16.1.1.9	ColumnipadSCADACfgLoopback	read-write	current	Loopback allows user to loop data to either Network, Serial Port or both.
1.3.6.1.4.1.321.100.1.17	NodeipadSCADAStats
1.3.6.1.4.1.321.100.1.17.1	TableipadSCADAStatsTable	not-accessible	current	The SCADA statistics table.
1.3.6.1.4.1.321.100.1.17.1.1	RowipadSCADAStatsTableEntry	not-accessible	current	An entry in the SCADA statistics table.
1.3.6.1.4.1.321.100.1.17.1.1.1	ColumnipadSCADAStatsIndex	read-only	current	The index for SCADA Statistics Table.
1.3.6.1.4.1.321.100.1.17.1.1.2	ColumnipadSCADAStatsTxChars	read-only	current	The number of chracters transmitted through SCADA port.
1.3.6.1.4.1.321.100.1.17.1.1.3	ColumnipadSCADAStatsRxChars	read-only	current	The number of chracters received through SCADA port.
1.3.6.1.4.1.321.100.1.17.1.1.4	ColumnipadSCADAStatsTxMsgs	read-only	current	The number of messages transmitted through SCADA port.
1.3.6.1.4.1.321.100.1.17.1.1.5	ColumnipadSCADAStatsRxMsgs	read-only	current	The number of messages received through SCADA port.
1.3.6.1.4.1.321.100.1.17.1.1.6	ColumnipadSCADAStatsRxParityErrors	read-only	current	The number of parity errors received from SCADA port.
1.3.6.1.4.1.321.100.1.17.1.1.7	ColumnipadSCADAStatsRxFramingErrors	read-only	current	The number of framming errors received from SCADA port.
1.3.6.1.4.1.321.100.1.17.1.1.8	ColumnipadSCADAStatsClear	read-write	current	Writing a value of ipadSCADAStatsClearNow(2) to this field causes all existing stats to be cleared immediately.
1.3.6.1.4.1.321.100.1.18	NodeipadSCADADevLst
1.3.6.1.4.1.321.100.1.18.1	TableipadSCADADevLstTable	not-accessible	current	The SCADA device list table.
1.3.6.1.4.1.321.100.1.18.1.1	RowipadSCADADevLstTableEntry	not-accessible	current	An entry in the SCADA device list table.
1.3.6.1.4.1.321.100.1.18.1.1.1	ColumnipadSCADADevLstIndex	read-only	current	The index for SCADA device list table.
1.3.6.1.4.1.321.100.1.18.1.1.2	ColumnipadSCADADevLstDevIndex	read-only	current	The index of device.
1.3.6.1.4.1.321.100.1.18.1.1.3	ColumnipadSCADADevLstEndpointName	read-write	current	The name of the endpoint.
1.3.6.1.4.1.321.100.1.18.1.1.4	ColumnipadSCADADevLstEntryStatus	read-write	current	The disabled or dnabled status of the entry.
1.3.6.1.4.1.321.100.1.19	NodeipadDS0Config
1.3.6.1.4.1.321.100.1.19.1	TableipadDS0ConfigTable	not-accessible	current	The ipad DS0 Utilization Monitor Config table.
1.3.6.1.4.1.321.100.1.19.1.1	RowipadDS0ConfigTableEntry	not-accessible	current	An entry in the ipad DS0 Utilization Monitor Config table.
1.3.6.1.4.1.321.100.1.19.1.1.1	ColumnipadDS0ConfigIndex	read-only	current	Index into the DS0 Utilization Monitor Config table.
1.3.6.1.4.1.321.100.1.19.1.1.2	ColumnipadDS0ConfigNumberDS0	read-only	current	Number of DS0's monitored by this table entry.
1.3.6.1.4.1.321.100.1.19.1.1.3	ColumnipadDS0ConfigResetTimer	read-write	current	Number of contiguous seconds a utilization alarm must not be present before the alarm condition is automatically reset.
1.3.6.1.4.1.321.100.1.19.1.1.4	ColumnipadDS0ConfigHighUtil	read-write	current	What the user considers a high DS0 utilization for this entry. Utilization is expressed as a percentage.
1.3.6.1.4.1.321.100.1.19.1.1.5	ColumnipadDS0ConfigHighUtilThreshold	read-write	current	Number of seconds a high utilization condition must be present within 15 minutes before an alarm condition is declared.
1.3.6.1.4.1.321.100.1.19.1.1.6	ColumnipadDS0ConfigHighUtilStatus	read-only	current	Indicates if a high utilization condition exists.
1.3.6.1.4.1.321.100.1.19.1.1.7	ColumnipadDS0ConfigHighUtilCount	read-only	current	The number of seconds in the past 15 minutes that have been greater than or equal to the high utilization parameter. The value is calculated from a sliding win…
1.3.6.1.4.1.321.100.1.19.1.1.8	ColumnipadDS0ConfigHighUtilAlarm	read-only	current	Indicates if the high utilization alarm threshold is exceeded.
1.3.6.1.4.1.321.100.1.19.1.1.9	ColumnipadDS0ConfigLowUtil	read-write	current	What the user considers an end-of-day low DS0 utilization for this entry. Utilization is expressed as a percentage. When the utilization is set to zero the low…
1.3.6.1.4.1.321.100.1.19.1.1.10	ColumnipadDS0ConfigLowUtilAlarm	read-only	current	Indicates if the low utilization alarm is declared.
1.3.6.1.4.1.321.100.1.19.1.1.11	ColumnipadDS0ConfigReset	read-write	current	The set values perform the following actions: clearAlarms(2) - Clears any active DS0 utilization alarms and counts clearHistory(3) - Clears DS0 utilization his…
1.3.6.1.4.1.321.100.1.20	NodeipadDS0Hist24
1.3.6.1.4.1.321.100.1.20.1	TableipadDS0Hist24Table	not-accessible	current	The ipad DS0 Utilization Monitor 24-Hour History table.
1.3.6.1.4.1.321.100.1.20.1.1	RowipadDS0Hist24TableEntry	not-accessible	current	An entry in the ipad DS0 Utilization Monitor 24-Hour History table.
1.3.6.1.4.1.321.100.1.20.1.1.1	ColumnipadDS0Hist24Index	read-only	current	Index into the DS0 Utilization Monitor 24-Hour History table.
1.3.6.1.4.1.321.100.1.20.1.1.2	ColumnipadDS0Hist24HistoricalIndex	read-only	current	Historical index into the DS0 Utilization Monitor 24-Hour History table.
1.3.6.1.4.1.321.100.1.20.1.1.3	ColumnipadDS0Hist24Timestamp	read-only	current	SysUpTime when the utilization interval completed.
1.3.6.1.4.1.321.100.1.20.1.1.4	ColumnipadDS0Hist24HighUtilSeconds	read-only	current	The number of seconds in the interval that have been greater than or equal to the high utilization parameter.
1.3.6.1.4.1.321.100.1.20.1.1.5	ColumnipadDS0Hist24Utilization	read-only	current	The percent of DS0's utilized over the given interval.
1.3.6.1.4.1.321.100.1.21	NodeipadDS0Hist30
1.3.6.1.4.1.321.100.1.21.1	TableipadDS0Hist30Table	not-accessible	current	The ipad DS0 Utilization Monitor 30-Day History table.
1.3.6.1.4.1.321.100.1.21.1.1	RowipadDS0Hist30TableEntry	not-accessible	current	An entry in the ipad DS0 Utilization Monitor 30-Day History table.
1.3.6.1.4.1.321.100.1.21.1.1.1	ColumnipadDS0Hist30Index	read-only	current	Index into the DS0 Utilization Monitor 30-Day History table.
1.3.6.1.4.1.321.100.1.21.1.1.2	ColumnipadDS0Hist30HistoricalIndex	read-only	current	Historical index into the DS0 Utilization Monitor 30-Day History table.
1.3.6.1.4.1.321.100.1.21.1.1.3	ColumnipadDS0Hist30Timestamp	read-only	current	SysUpTime when the utilization interval completed.
1.3.6.1.4.1.321.100.1.21.1.1.4	ColumnipadDS0Hist30HighUtilSeconds	read-only	current	The number of seconds in the interval that have been greater than or equal to the high utilization parameter.
1.3.6.1.4.1.321.100.1.21.1.1.5	ColumnipadDS0Hist30Utilization	read-only	current	The percent of DS0's utilized over the given interval.
1.3.6.1.4.1.321.100.1.22	NodeipadHDLCConfig
1.3.6.1.4.1.321.100.1.22.1	TableipadHDLCConfigTable	not-accessible	current	The ipad HDLC Utilization Monitor Config table.
1.3.6.1.4.1.321.100.1.22.1.1	RowipadHDLCConfigTableEntry	not-accessible	current	An entry in the ipad HDLC Utilization Monitor Config table.
1.3.6.1.4.1.321.100.1.22.1.1.1	ColumnipadHDLCConfigIndex	read-only	current	Index into the HDLC Utilization Monitor Config table.
1.3.6.1.4.1.321.100.1.22.1.1.2	ColumnipadHDLCConfigService	read-write	current	Service the HDLC utilization monitor is attached. 0 = Disabled.
1.3.6.1.4.1.321.100.1.22.1.1.3	ColumnipadHDLCConfigServiceBPS	read-only	current	Service bit rate.
1.3.6.1.4.1.321.100.1.22.1.1.4	ColumnipadHDLCConfigResetTimer	read-write	current	Number of contiguous seconds a utilization alarm must not be present before the alarm condition is automatically reset.
1.3.6.1.4.1.321.100.1.22.1.1.5	ColumnipadHDLCConfigRxHighUtil	read-write	current	What the user considers a high Rx HDLC utilization for this entry. Utilization is expressed as a percentage.
1.3.6.1.4.1.321.100.1.22.1.1.6	ColumnipadHDLCConfigRxHighUtilThreshold	read-write	current	Number of seconds a Rx high utilization condition must be present within 15 minutes before an alarm condition is declared.
1.3.6.1.4.1.321.100.1.22.1.1.7	ColumnipadHDLCConfigRxHighUtilStatus	read-only	current	Indicates if a Rx high utilization condition exists.
1.3.6.1.4.1.321.100.1.22.1.1.8	ColumnipadHDLCConfigRxHighUtilCount	read-only	current	The number of seconds in the past 15 minutes that have been greater than or equal to the Rx high utilization parameter. The value is calculated from a sliding …
1.3.6.1.4.1.321.100.1.22.1.1.9	ColumnipadHDLCConfigRxHighUtilAlarm	read-only	current	Indicates if the Rx high utilization alarm threshold is exceeded.
1.3.6.1.4.1.321.100.1.22.1.1.10	ColumnipadHDLCConfigRxLowUtil	read-write	current	What the user considers an end-of-day low Rx HDLC utilization for this entry. Utilization is expressed as a percentage. When the utilization is set to zero the…
1.3.6.1.4.1.321.100.1.22.1.1.11	ColumnipadHDLCConfigRxLowUtilAlarm	read-only	current	Indicates if the Rx low utilization alarm is declared.
1.3.6.1.4.1.321.100.1.22.1.1.12	ColumnipadHDLCConfigTxHighUtil	read-write	current	What the user considers a high Tx HDLC utilization for this entry. Utilization is expressed as a percentage.
1.3.6.1.4.1.321.100.1.22.1.1.13	ColumnipadHDLCConfigTxHighUtilThreshold	read-write	current	Number of seconds a Tx high utilization condition must be present within 15 minutes before an alarm condition is declared.
1.3.6.1.4.1.321.100.1.22.1.1.14	ColumnipadHDLCConfigTxHighUtilStatus	read-only	current	Indicates if a Tx high utilization condition exists.
1.3.6.1.4.1.321.100.1.22.1.1.15	ColumnipadHDLCConfigTxHighUtilCount	read-only	current	The number of seconds in the past 15 minutes that have been greater than or equal to the Tx high utilization parameter. The value is calculated from a sliding …
1.3.6.1.4.1.321.100.1.22.1.1.16	ColumnipadHDLCConfigTxHighUtilAlarm	read-only	current	Indicates if the Tx high utilization alarm threshold is exceeded.
1.3.6.1.4.1.321.100.1.22.1.1.17	ColumnipadHDLCConfigTxLowUtil	read-write	current	What the user considers an end-of-day low Tx HDLC utilization for this entry. Utilization is expressed as a percentage. When the utilization is set to zero the…
1.3.6.1.4.1.321.100.1.22.1.1.18	ColumnipadHDLCConfigTxLowUtilAlarm	read-only	current	Indicates if the Tx low utilization alarm is declared.
1.3.6.1.4.1.321.100.1.22.1.1.19	ColumnipadHDLCConfigReset	read-write	current	The set values perform the following actions: clearAlarms(2) - Clears any active HDLC utilization alarms and counts clearHistory(3) - Clears HDLC utilization h…
1.3.6.1.4.1.321.100.1.23	NodeipadHDLCHist24
1.3.6.1.4.1.321.100.1.23.1	TableipadHDLCHist24Table	not-accessible	current	The ipad HDLC Utilization Monitor 24-Hour History table.
1.3.6.1.4.1.321.100.1.23.1.1	RowipadHDLCHist24TableEntry	not-accessible	current	An entry in the ipad HDLC Utilization Monitor 24-Hour History table.
1.3.6.1.4.1.321.100.1.23.1.1.1	ColumnipadHDLCHist24Index	read-only	current	Index into the HDLC Utilization Monitor 24-Hour History table.
1.3.6.1.4.1.321.100.1.23.1.1.2	ColumnipadHDLCHist24HistoricalIndex	read-only	current	Historical index into the HDLC Utilization Monitor 24-Hour History table.
1.3.6.1.4.1.321.100.1.23.1.1.3	ColumnipadHDLCHist24Timestamp	read-only	current	SysUpTime when the utilization interval completed.
1.3.6.1.4.1.321.100.1.23.1.1.4	ColumnipadHDLCHist24RxHighUtilSeconds	read-only	current	The number of seconds in the interval that have been greater than or equal to the Rx high utilization parameter.
1.3.6.1.4.1.321.100.1.23.1.1.5	ColumnipadHDLCHist24RxUtilization	read-only	current	The percent of Rx HDLC bandwidth utilized over the given interval.
1.3.6.1.4.1.321.100.1.23.1.1.6	ColumnipadHDLCHist24TxHighUtilSeconds	read-only	current	The number of seconds in the interval that have been greater than or equal to the Tx high utilization parameter.
1.3.6.1.4.1.321.100.1.23.1.1.7	ColumnipadHDLCHist24TxUtilization	read-only	current	The percent of Tx HDLC bandwidth utilized over the given interval.
1.3.6.1.4.1.321.100.1.24	NodeipadHDLCHist30
1.3.6.1.4.1.321.100.1.24.1	TableipadHDLCHist30Table	not-accessible	current	The ipad HDLC Utilization Monitor 30-Day History table.
1.3.6.1.4.1.321.100.1.24.1.1	RowipadHDLCHist30TableEntry	not-accessible	current	An entry in the ipad HDLC Utilization Monitor 30-Day History table.
1.3.6.1.4.1.321.100.1.24.1.1.1	ColumnipadHDLCHist30Index	read-only	current	Index into the HDLC Utilization Monitor 30-Day History table.
1.3.6.1.4.1.321.100.1.24.1.1.2	ColumnipadHDLCHist30HistoricalIndex	read-only	current	Historical index into the HDLC Utilization Monitor 30-Day History table.
1.3.6.1.4.1.321.100.1.24.1.1.3	ColumnipadHDLCHist30Timestamp	read-only	current	SysUpTime when the utilization interval completed.
1.3.6.1.4.1.321.100.1.24.1.1.4	ColumnipadHDLCHist30RxHighUtilSeconds	read-only	current	The number of seconds in the interval that have been greater than or equal to the Rx high utilization parameter.
1.3.6.1.4.1.321.100.1.24.1.1.5	ColumnipadHDLCHist30RxUtilization	read-only	current	The percent of Rx HDLC bandwidth utilized over the given interval.
1.3.6.1.4.1.321.100.1.24.1.1.6	ColumnipadHDLCHist30TxHighUtilSeconds	read-only	current	The number of seconds in the interval that have been greater than or equal to the Tx high utilization parameter.
1.3.6.1.4.1.321.100.1.24.1.1.7	ColumnipadHDLCHist30TxUtilization	read-only	current	The percent of Tx HDLC bandwidth utilized over the given interval.
1.3.6.1.4.1.321.100.1.25	NodeipadAtm
1.3.6.1.4.1.321.100.1.26	NodeipadNat
1.3.6.1.4.1.321.100.1.27	NodeipadDhcp
1.3.6.1.4.1.321.100.1.28	NodeipadBridge
1.3.6.1.4.1.321.100.1.29	NodeipadSmtp
1.3.6.1.4.1.321.100.1.29.1	ScalaripadSmtpMailServer	read-write	current	IP Address of the .
1.3.6.1.4.1.321.100.1.29.2	ScalaripadSmtpDomainName	read-write	current	Domain Name of the SMTP client.
1.3.6.1.4.1.321.100.1.29.3	ScalaripadSmtpMailFrom	read-write	current	Name of the SMTP client, is used in the From section of the email.
1.3.6.1.4.1.321.100.1.29.4	ScalaripadSmtpRecipient1	read-write	current	Destination for the email.
1.3.6.1.4.1.321.100.1.29.5	ScalaripadSmtpRecipient2	read-write	current	Destination for the email.
1.3.6.1.4.1.321.100.1.29.6	ScalaripadSmtpRecipient3	read-write	current	Destination for the email.
1.3.6.1.4.1.321.100.1.29.7	ScalaripadSmtpRecipient4	read-write	current	Destination for the email.
1.3.6.1.4.1.321.100.1.29.8	ScalaripadSmtpRecipient5	read-write	current	Destination for the email.
1.3.6.1.4.1.321.100.1.30	NodeipadEncryption
1.3.6.1.4.1.321.100.1.30.1	ScalaripadEncryptionEnable	read-write	current	Allow disabling encryption.
1.3.6.1.4.1.321.100.1.30.2	ScalaripadEncryptionStartupKey	read-write	current
1.3.6.1.4.1.321.100.1.30.3	ScalaripadEncryptionStartupKeyConfirm	read-write	current
1.3.6.1.4.1.321.100.1.30.4	ScalaripadEncryptionType	read-write	current
1.3.6.1.4.1.321.100.1.30.5	ScalaripadEncryptionKey1	read-write	current
1.3.6.1.4.1.321.100.1.30.6	ScalaripadEncryptionKey2	read-write	current
1.3.6.1.4.1.321.100.1.30.7	ScalaripadEncryptionKey3	read-write	current
1.3.6.1.4.1.321.100.1.30.8	ScalaripadEncryptionKey4	read-write	current
1.3.6.1.4.1.321.100.1.30.9	ScalaripadEncryptionKey5	read-write	current
1.3.6.1.4.1.321.100.1.30.10	ScalaripadEncryptionKey6	read-write	current
1.3.6.1.4.1.321.100.1.30.11	ScalaripadEncryptionKey7	read-write	current
1.3.6.1.4.1.321.100.1.30.12	ScalaripadEncryptionKey8	read-write	current
1.3.6.1.4.1.321.100.1.30.13	ScalaripadEncryptionKey9	read-write	current
1.3.6.1.4.1.321.100.1.30.14	ScalaripadEncryptionKey10	read-write	current
1.3.6.1.4.1.321.100.1.30.15	ScalaripadEncryptionKeyLife	read-write	current
1.3.6.1.4.1.321.100.1.31	NodeipadAutoLearnDS0
1.3.6.1.4.1.321.100.1.31.1	TableipadAutoLearnDS0Table	not-accessible	current	The ipad Auto Learn DS0 Config table.
1.3.6.1.4.1.321.100.1.31.1.1	RowipadAutoLearnDS0TableEntry	not-accessible	current	An entry in the ipad Auto Learn DS0 Config table.
1.3.6.1.4.1.321.100.1.31.1.1.1	ColumnipadAutoLearnDS0Index	read-only	current	The MIB-II ifIndex into the Auto Learn DS0 Config table.
1.3.6.1.4.1.321.100.1.31.1.1.2	ColumnipadAutoLearnDS0Boot	read-write	current	Select when to automatically learn DS0 assignments: disable - Do not automatically learn DS0s enable - Learn on boot carrierDown - Learn on boot and while the …
1.3.6.1.4.1.321.100.1.31.1.1.3	ColumnipadAutoLearnDS0Rate	read-write	current	Select the rate of the learned DS0's.
1.3.6.1.4.1.321.100.1.31.1.1.4	ColumnipadAutoLearnDS0Command	read-write	current	The set values perform the following actions: learnNow(2) - Attempt to learn the active DS0's now.
1.3.6.1.4.1.321.100.1.32	NodeipadUnitAccess
1.3.6.1.4.1.321.100.1.32.1	TableipadUnitAccessTable	not-accessible	current	The ipad Unit Access table.
1.3.6.1.4.1.321.100.1.32.1.1	RowipadUnitAccessTableEntry	not-accessible	current	An entry in the ipad Unit Access table.
1.3.6.1.4.1.321.100.1.32.1.1.1	ColumnipadUnitAccessIndex	read-only	current	The MIB-II Index into the Unit Access table.
1.3.6.1.4.1.321.100.1.32.1.1.2	ColumnipadUnitAccessIpa	read-write	current	IP Address of Source to allow Unit Access.
1.3.6.1.4.1.321.100.1.32.1.1.3	ColumnipadUnitAccessMask	read-write	current	Mask of Source to allow Unit Access.
1.3.6.1.4.1.321.100.1.33	NodeipadTFTPDownload
1.3.6.1.4.1.321.100.1.33.1	ScalaripadTFTPDownloadServerIpa	read-write	current	TFTP Server IP Address.
1.3.6.1.4.1.321.100.1.33.2	ScalaripadTFTPDownloadFileName	read-write	current	TFTP Filename to Download or Upload.
1.3.6.1.4.1.321.100.1.33.3	ScalaripadTFTPDownloadAction	read-write	current	TFTP Action to be performed.
1.3.6.1.4.1.321.100.1.33.4	ScalaripadTFTPDownloadStatus	read-only	current	TFTP current status of action.
1.3.6.1.4.1.321.100.1.34	NodeipadDataLineMonitor
1.3.6.1.4.1.321.100.1.34.1	NodeipadDLMConfig
1.3.6.1.4.1.321.100.1.34.1.1	ScalaripadDLMConfigMode	read-write	current	Data Link Monitor on/off switch. Toggles mode from analyze (static) to live (capture).
1.3.6.1.4.1.321.100.1.34.1.2	ScalaripadDLMConfigBufferManagement	read-write	current	The DLM has a buffer of n messages. Settings this object to wrap(2) allows the buffer to wrap around and be a continous buffer. stopOnFull(3) forces the captur…
1.3.6.1.4.1.321.100.1.34.2	TableipadDLMTable	not-accessible	current	The ipad Data Line Monitor configuration table.
1.3.6.1.4.1.321.100.1.34.2.1	RowipadDLMTableEntry	not-accessible	current	An entry in the ipad DLM config table.
1.3.6.1.4.1.321.100.1.34.2.1.1	ColumnipadDLMServiceIndex	read-only	current	The service index into the DLM table.
1.3.6.1.4.1.321.100.1.34.2.1.2	ColumnipadDLMEnable	read-write	current	Enable/Disable the DLM on the specified service.
1.3.6.1.4.1.321.100.1.34.2.1.3	ColumnipadDLMTxRxFilter	read-write	current	Allows the user to capture only received, transmit, or both.
1.3.6.1.4.1.321.100.1.34.2.1.4	ColumnipadDLMPatternEnable	read-write	current	Enable/Disable the search for a specific pattern.
1.3.6.1.4.1.321.100.1.34.2.1.5	ColumnipadDLMPattern	read-write	current	The pattern to search for in the captured packets.
1.3.6.1.4.1.321.100.1.34.2.1.6	ColumnipadDLMPatternMask	read-write	current	The mask to use with ipadDLMPattern to search for in the captured packets.
1.3.6.1.4.1.321.100.1.34.2.1.7	ColumnipadDLMPatternOffset	read-write	current	The offset into the packet to search for the pattern.
1.3.6.1.4.1.321.100.1.34.3	TableipadDLMPacketTable	not-accessible	current	The ipad Data Link Monitor packet table.
1.3.6.1.4.1.321.100.1.34.3.1	RowipadDLMPacketTableEntry	not-accessible	current	An entry in the ipad DLM packet table.
1.3.6.1.4.1.321.100.1.34.3.1.1	ColumnipadDLMPacketIndex	read-only	current	The service index into the DLM table.
1.3.6.1.4.1.321.100.1.34.3.1.2	ColumnipadDLMPacketServiceIndex	read-only	current	The service index the packet was captured on.
1.3.6.1.4.1.321.100.1.34.3.1.3	ColumnipadDLMPacketTimestamp	read-only	current	The time that the packet was captured.
1.3.6.1.4.1.321.100.1.34.3.1.4	ColumnipadDLMPacketDataDirection	read-only	current	The direction the data was goin in respect to the interface.
1.3.6.1.4.1.321.100.1.34.3.1.5	ColumnipadDLMPacketSize	read-only	current	The size of the captured packet.
1.3.6.1.4.1.321.100.1.34.3.1.6	ColumnipadDLMPacketData	read-only	current	The contents of the first 32 bytes of the captured packet.
1.3.6.1.4.1.321.100.1.35	NodeipadOrigPing
1.3.6.1.4.1.321.100.1.35.1	ScalaripadOrigPingCommand	read-write	current	Action command to start/stop sending PING messages.
1.3.6.1.4.1.321.100.1.35.2	ScalaripadOrigPingDestIPAddr	read-write	current	Destination IP address of sent PING request messages.
1.3.6.1.4.1.321.100.1.35.3	ScalaripadOrigPingTimeout	read-write	current	Number of seconds to wait for a reply to a PING request message.
1.3.6.1.4.1.321.100.1.35.4	ScalaripadOrigPingSize	read-write	current	Number of bytes in a PING request message data field.
1.3.6.1.4.1.321.100.1.35.5	ScalaripadOrigPingToSend	read-write	current	Number of PING request messages to send.
1.3.6.1.4.1.321.100.1.35.6	ScalaripadOrigPingSent	read-only	current	Number of PING request messages sent.
1.3.6.1.4.1.321.100.1.35.7	ScalaripadOrigPingReplies	read-only	current	Number of PING response messages received.
1.3.6.1.4.1.321.100.1.35.8	ScalaripadOrigPingDelayMin	read-only	current	Minimum PING round trip delay in milliseconds.
1.3.6.1.4.1.321.100.1.35.9	ScalaripadOrigPingDelayAvg	read-only	current	Average PING round trip delay in milliseconds.
1.3.6.1.4.1.321.100.1.35.10	ScalaripadOrigPingDelayMax	read-only	current	Maximum PING round trip delay in milliseconds.
1.3.6.1.4.1.321.100.1.35.11	ScalaripadOrigPingReport	read-only	current	ASCII status report of originate PING activity.
1.3.6.1.4.1.321.100.1.35.12	ScalaripadOrigPingExceptReport	read-only	current	ASCII status report of last originate PING exception received.
1.3.6.1.4.1.321.100.1.999	NodeipadTraps
1.3.6.1.4.1.321.100.1.999.0	NodeipadTrapsPrefix
1.3.6.1.4.1.321.100.1.999.0.25000	NotificationipadFrPortRxInvalidFramesExceeded		current	This trap is sent out when an ipad frame relay port receive invalid frames alarm threshold has been exceeded.
1.3.6.1.4.1.321.100.1.999.0.25001	NotificationipadFrPortRxThroughputExceeded		current	This trap is sent out when an ipad frame relay port receive throughput threshold has been exceeded.
1.3.6.1.4.1.321.100.1.999.0.25002	NotificationipadFrPortTxThroughputExceeded		current	This trap is sent out when an ipad frame relay port transmit throughput threshold has been exceeded.
1.3.6.1.4.1.321.100.1.999.0.25003	NotificationipadDLCItxCIRexceeded		current	This trap is sent out when the Tx over CIR threshold has been exceeded. This threshold is the number of frames in excess of CIR.
1.3.6.1.4.1.321.100.1.999.0.25004	NotificationipadDLCItxBEexceeded		current	This trap is sent out when the Tx over Be threshold has been exceeded. This threshold is the number of frames in excess of Be.
1.3.6.1.4.1.321.100.1.999.0.25005	NotificationipadDLCIRxCongestionExceeded		current	This trap is sent out when the Rx congestion threshold has been exceeded. This threshold is the number of frames received with BECN/FECN.
1.3.6.1.4.1.321.100.1.999.0.25006	NotificationipadUserTxExceeded		current	This trap is sent out when the Tx throughput threshold in bits per second has been exceeded. This threshold represents the number of bits for the user-selected…
1.3.6.1.4.1.321.100.1.999.0.25007	NotificationipadDlciRxBECNinCIRAlarm		current	This trap is sent out when a frame with BECN set has been received within CIR.
1.3.6.1.4.1.321.100.1.999.0.25008	NotificationipadDlciUASExceeded		current	This trap is sent out when the UAS (unavailable seconds) threshold for the DLCI has been exceeded.
1.3.6.1.4.1.321.100.1.999.0.25009	NotificationipadserialDteDTRAlarmExists		current	This trap is sent out when a DTR Loss alarm is declared.
1.3.6.1.4.1.321.100.1.999.0.25010	Notificationipadt1e1ESAlarmDeclared		current	This trap is sent out when an Errored Seconds alarm is declared.
1.3.6.1.4.1.321.100.1.999.0.25011	Notificationipadt1e1SESAlarmDeclared		current	This trap is sent out when a Severely Errored Seconds alarm is declared.
1.3.6.1.4.1.321.100.1.999.0.25012	Notificationipadt1e1LOSSAlarmDeclared		current	This trap is sent out when a Loss of Signal Seconds alarm is declared.
1.3.6.1.4.1.321.100.1.999.0.25013	Notificationipadt1e1UASAlarmDeclared		current	This trap is sent out when an Unavailable Seconds alarm is declared.
1.3.6.1.4.1.321.100.1.999.0.25014	Notificationipadt1e1CSSAlarmDeclared		current	This trap is sent out when a Controlled Slip Seconds alarm is declared.
1.3.6.1.4.1.321.100.1.999.0.25015	Notificationipadt1e1BPVSAlarmDeclared		current	This trap is sent out when a Bipolar Violation Seconds alarm is declared.
1.3.6.1.4.1.321.100.1.999.0.25016	Notificationipadt1e1OOFSAlarmDeclared		current	This trap is sent out when an Out of Frame Seconds alarm is declared.
1.3.6.1.4.1.321.100.1.999.0.25017	Notificationipadt1e1AISAlarmExists		current	This trap is sent out when an Alarm Indication Signal alarm is declared.
1.3.6.1.4.1.321.100.1.999.0.25018	Notificationipadt1e1RASAlarmExists		current	This trap is sent out when a Remote Alarm Signal alarm is declared.
1.3.6.1.4.1.321.100.1.999.0.25019	NotificationipadDLCIremoteSOSAlarm		current	This trap is sent when the remote unit for a DLCI senses and reports an SOS condition.
1.3.6.1.4.1.321.100.1.999.0.25020	NotificationipadDdsLOSSAlarmDeclared		current	This trap is sent out when a Loss of Signal Seconds alarm is declared.
1.3.6.1.4.1.321.100.1.999.0.25021	NotificationipadDdsOOFSAlarmDeclared		current	This trap is sent out when an Out of Frame Seconds alarm is declared.
1.3.6.1.4.1.321.100.1.999.0.25022	NotificationipadDdsOOSSAlarmDeclared		current	This trap is sent out when an Out of Service Seconds alarm is declared.
1.3.6.1.4.1.321.100.1.999.0.25023	NotificationipadDdsFDLSAlarmDeclared		current	This trap is sent out when a FDL error Seconds alarm is declared.
1.3.6.1.4.1.321.100.1.999.0.25024	NotificationipadDdsBPVSAlarmDeclared		current	This trap is sent out when a Bipolar Violation Seconds alarm is declared.
1.3.6.1.4.1.321.100.1.999.0.25025	NotificationipadDS0HighAlarmDeclared		current	This trap is sent out when a high utilization alarm is declared.
1.3.6.1.4.1.321.100.1.999.0.25026	NotificationipadDS0LowAlarmDeclared		current	This trap is sent out when a low utilization alarm is declared.
1.3.6.1.4.1.321.100.1.999.0.25027	NotificationipadHDLCRxHighAlarmDeclared		current	This trap is sent out when a high Rx utilization alarm is declared.
1.3.6.1.4.1.321.100.1.999.0.25028	NotificationipadHDLCRxLowAlarmDeclared		current	This trap is sent out when a low Rx utilization alarm is declared.
1.3.6.1.4.1.321.100.1.999.0.25029	NotificationipadHDLCTxHighAlarmDeclared		current	This trap is sent out when a high Tx utilization alarm is declared.
1.3.6.1.4.1.321.100.1.999.0.25030	NotificationipadHDLCTxLowAlarmDeclared		current	This trap is sent out when a low Tx utilization alarm is declared.
1.3.6.1.4.1.321.100.1.999.0.25031	NotificationipadDbuActivated		current	This trap is sent out when Dial Backup becomes active.

MIB Viewer

What's a MIB?

What's SNMP?

What's an OID?

IPADv2-MIB