IPI-G8031-MIB
47 objects
g8031 mib for IPI enterprise.
Imported Objects
| IEEE8021-CFM-MIB | Dot1agCfmCcmInterval Dot1agCfmMaintAssocName Dot1agCfmMaintDomainName Dot1agCfmMDLevel Dot1agCfmMepIdOrZero |
| IPI-MODULE-MIB | 1ag ipi |
| SNMPv2-SMI | Counter32 Integer32 MODULE-IDENTITY NOTIFICATION-TYPE OBJECT-TYPE TimeTicks Unsigned32 |
| SNMPv2-TC | DisplayString TEXTUAL-CONVENTION TruthValue |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.36673.8031 | IdentityipiG8031MIB | g8031 mib for IPI enterprise. | ||
| 1.3.6.1.4.1.36673.8031.0 | NodeipiG8031MIBNotifs | |||
| 1.3.6.1.4.1.36673.8031.0.1 | NotificationipiG8031ActivePathNotify | current | An ipiG8031ActivePathNotify notification is sent when there is changes in protection switching path (working/protection). | |
| 1.3.6.1.4.1.36673.8031.1 | NodeipiG8031MIBObjects | |||
| 1.3.6.1.4.1.36673.8031.1.1 | TableipiG8031ConfigInstanceTable | not-accessible | current | A Table containing information of G8031 Instance configured. |
| 1.3.6.1.4.1.36673.8031.1.1.1 | RowipiG8031ConfigInstanceEntry | not-accessible | current | A Table object containing information of G8031 Instance entries. |
| 1.3.6.1.4.1.36673.8031.1.1.1.1 | ColumnipiG8031ProtectionGroupIndex | read-only | current | This object specifies the G8031 ProtectionGroup Index. |
| 1.3.6.1.4.1.36673.8031.1.1.1.3 | ColumnipiG8031InstBridgeType | read-only | current | This object specifies the configured G8031 Bridge architecture type is 1:1 or 1+1. |
| 1.3.6.1.4.1.36673.8031.1.1.1.4 | ColumnipiG8031InstProfileDirection | read-only | current | This object specifies the configured G8031 profile direction uni-directional or bi-directional switching. |
| 1.3.6.1.4.1.36673.8031.1.1.1.5 | ColumnipiG8031InstProfileProtectionMode | read-only | current | This object specifies the configured protection mode for an G8031 profile based on ipiG8031ProtectionMode types. |
| 1.3.6.1.4.1.36673.8031.1.1.1.6 | ColumnipiG8031InstProfileSwitchingMode | read-only | current | This object specifies the switching mode for an G8031 profile based on ipiG8031SwitchingMode types. |
| 1.3.6.1.4.1.36673.8031.1.1.1.7 | ColumnipiG8031InstProfileHoldOffTimer | read-only | current | This object specifies the hold-off timer status for an G8031 profile. Each protection group should have a provisionable hold-off timer. The suggested range of … |
| 1.3.6.1.4.1.36673.8031.1.1.1.8 | ColumnipiG8031InstProfileWaitToRestoreTimer | read-only | current | This object specifies the wait-to-restore timer for an G8031 profile. The wait-to-restore (WTR) period, may be configured by the operator in 1 minute steps bet… |
| 1.3.6.1.4.1.36673.8031.1.1.1.9 | ColumnipiG8031InstWorkingPortName | read-only | current | This object specifies the configured working port name. |
| 1.3.6.1.4.1.36673.8031.1.1.1.10 | ColumnipiG8031InstWorkingPortIndex | read-only | current | This object specifies the configured working port ifindex. |
| 1.3.6.1.4.1.36673.8031.1.1.1.11 | ColumnipiG8031InstWorkingPortStatus | read-only | current | This object specifies the working port status as UP/DOWN. |
| 1.3.6.1.4.1.36673.8031.1.1.1.12 | ColumnipiG8031InstWorkingMepId | read-create | current | This object specifies the MEP ID configured for working CFM Port. |
| 1.3.6.1.4.1.36673.8031.1.1.1.13 | ColumnipiG8031InstWorkingCCIntvl | read-create | current | This object specifies the CC Interval configured for working CFM Port |
| 1.3.6.1.4.1.36673.8031.1.1.1.14 | ColumnipiG8031InstWorkingDomainName | read-create | current | This object specifies the DomainName configured for working CFM Port. |
| 1.3.6.1.4.1.36673.8031.1.1.1.15 | ColumnipiG8031InstWorkingMaName | read-create | current | This object specifies the MaintenanceAssociation name configured for working CFM Port. |
| 1.3.6.1.4.1.36673.8031.1.1.1.16 | ColumnipiG8031InstProtectionPortName | read-only | current | This object specifies the cofigured protection port name. |
| 1.3.6.1.4.1.36673.8031.1.1.1.17 | ColumnipiG8031InstProtectionPortIndex | read-only | current | This object specifies the configured protection port ifindex. |
| 1.3.6.1.4.1.36673.8031.1.1.1.18 | ColumnipiG8031InstProtectionPortStatus | read-only | current | This object specifies the protection port status as UP/DOWN. |
| 1.3.6.1.4.1.36673.8031.1.1.1.19 | ColumnipiG8031InstProtectionMepId | read-create | current | This object specifies the MEP ID configured for protection CFM Port. |
| 1.3.6.1.4.1.36673.8031.1.1.1.20 | ColumnipiG8031InstProtectionCCIntvl | read-create | current | This object specifies the CC Interval configured for protection CFM Port. |
| 1.3.6.1.4.1.36673.8031.1.1.1.21 | ColumnipiG8031InstProtectionDomainName | read-create | current | This object specifies the DomainName configured for protection CFM Port. |
| 1.3.6.1.4.1.36673.8031.1.1.1.22 | ColumnipiG8031InstProtectionMaName | read-create | current | This object specifies the MaintenanceAssociation name configured for protection CFM Port. |
| 1.3.6.1.4.1.36673.8031.1.1.1.23 | ColumnipiG8031InstChannelLevel | read-only | current | This object specifies the CFM level configured for G8031 Instance. |
| 1.3.6.1.4.1.36673.8031.1.1.1.24 | ColumnipiG8031InstControlVlan | read-only | current | This object specifies the control(primary) vlan configured in G8031 Instance. |
| 1.3.6.1.4.1.36673.8031.1.1.1.25 | ColumnipiG8031InstInnerVlan | read-only | current | This object specifies the secondary(inner) vlan configured in G8031 Instance. |
| 1.3.6.1.4.1.36673.8031.1.1.1.26 | ColumnipiG8031InstDataVlan | read-only | current | This object specifies the data vlan configured in G8031 Instance. |
| 1.3.6.1.4.1.36673.8031.1.2 | TableipiG8031StatusTable | not-accessible | current | A Table containing information of G8031 Status of FSM,APS PDU and Active Path Info |
| 1.3.6.1.4.1.36673.8031.1.2.1 | RowipiG8031StatusEntry | not-accessible | current | A Table object containing information of G8031 Status entries |
| 1.3.6.1.4.1.36673.8031.1.2.1.1 | ColumnipiG8031InstName | read-only | current | This object specifies the configured G8031 Instance Name. |
| 1.3.6.1.4.1.36673.8031.1.2.1.2 | ColumnipiG8031ActivePath | read-only | current | This object specifies the whether the active path(transport entity) is working or protection port. |
| 1.3.6.1.4.1.36673.8031.1.2.1.3 | ColumnipiG8031TxCount | read-only | current | This object specifies the APS message transmitted. |
| 1.3.6.1.4.1.36673.8031.1.2.1.4 | ColumnipiG8031RxCount | read-only | current | This object specifies the APS message received. |
| 1.3.6.1.4.1.36673.8031.1.2.1.5 | ColumnipiG8031CurrState | read-only | current | This object specifies the G8031 FSM State based on ipiG8031FsmState states. |
| 1.3.6.1.4.1.36673.8031.1.2.1.6 | ColumnipiG8031dFopState | read-only | current | This object specifies the G8031 downstream failure state of port. Values are based on ipiG8031dFopState states |
| 1.3.6.1.4.1.36673.8031.1.2.1.7 | ColumnipiG8031ReqSignal | read-only | current | This object specifies the G8031 requested signal as either normal or null. |
| 1.3.6.1.4.1.36673.8031.1.2.1.8 | ColumnipiG8031LocalCmd | read-only | current | This object specifies the G8031 local commands either local-lockout/freeze. |
Type Definitions
| Name | Syntax | Status | Description |
|---|---|---|---|
| IpiG8031ActivePathType | INTEGER { working-port (1), protection-port(2) } | current | Timer status |
| IpiG8031dFopState | INTEGER { b-BitMismatchError (1), d-BitMismatchError (2), r-BitMismatchError (3), aps-Rcvd-On-Working (4), aps-Not-Rcvd-After-State-Change (5), not-in-Defect-Mode (6) } | current | G8031 Finite State Machine state of dFOP Defect state |
| IpiG8031FsmState | INTEGER { no-Request(1), do-Not-Revert (2), reverse-Request (3), exercise (4), wait-To-Restore (5), manual-Switch (6), signal-Degrade (7), working-Signal-Fail (8), forced-Switch (9), signal-Fail-for-Protection (10), lockout-Of-Protection (11), invalid (12) } | current | G8031 Finite State Machine state |
| IpiG8031LocalCmds | INTEGER { local-freeze (1), local-lockout (2) } | current | G8031 Local commands |
| IpiG8031ProtectionMode | INTEGER { one-and-one-Bi(1), one-plus-one-Bi(2), one-and-one-Uni(3) } | current | Protection mode |
| IpiG8031SwitchingMode | INTEGER { revertive (1), non-revertive(2) } | current | Switching mode |