IPSEC-SPD-MIB
139 objects
This MIB module defines configuration objects for managing IPsec Security Policies. In general, this MIB can be implemented anywhere IPsec security services exist (e.g., bump-in-the-wire, host, gateway, firewall, router, etc.). Copyright (C) The IETF Trust (2007). This version of this MIB module is part of RFC 4807; see the RFC itself for full legal notices.
Imported Objects
| DIFFSERV-MIB | diffServMIBMultiFieldClfrGroup diffServMultiFieldClfrNextFree IfDirection |
| IF-MIB | InterfaceIndex |
| INET-ADDRESS-MIB | InetAddress InetAddressType |
| SNMP-FRAMEWORK-MIB | SnmpAdminString |
| SNMPv2-CONF | MODULE-COMPLIANCE NOTIFICATION-GROUP OBJECT-GROUP |
| SNMPv2-SMI | Integer32 mib-2 MODULE-IDENTITY NOTIFICATION-TYPE OBJECT-TYPE Unsigned32 |
| SNMPv2-TC | RowStatus StorageType TEXTUAL-CONVENTION TimeStamp TruthValue VariablePointer |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.2.1.153 | IdentityspdMIB | This MIB module defines configuration objects for managing IPsec Security Policies. In general, this MIB can be implemented anywhere IPsec security services ex… | ||
| 1.3.6.1.2.1.153.1 | NodespdConfigObjects | |||
| 1.3.6.1.2.1.153.1.1 | NodespdLocalConfigObjects | |||
| 1.3.6.1.2.1.153.1.1.1 | ScalarspdIngressPolicyGroupName | read-write | current | This object indicates the global system policy group that is to be applied on ingress packets (i.e., arriving at an interface from a network) when a given endp… |
| 1.3.6.1.2.1.153.1.1.2 | ScalarspdEgressPolicyGroupName | read-write | current | This object indicates the policy group containing the global system policy that is to be applied on egress packets (i.e., packets leaving an interface and ente… |
| 1.3.6.1.2.1.153.1.2 | TablespdEndpointToGroupTable | not-accessible | current | This table maps policies (groupings) onto an endpoint (interface). A policy group assigned to an endpoint is then used to control access to the network traffic… |
| 1.3.6.1.2.1.153.1.2.1 | RowspdEndpointToGroupEntry | not-accessible | current | A mapping assigning a policy group to an endpoint. |
| 1.3.6.1.2.1.153.1.2.1.1 | ColumnspdEndGroupDirection | not-accessible | current | This object indicates which direction of packets crossing the interface are associated with which spdEndGroupName object. Ingress packets, or packets into the … |
| 1.3.6.1.2.1.153.1.2.1.2 | ColumnspdEndGroupInterface | not-accessible | current | This value matches the IF-MIB's ifTable's ifIndex column and indicates the interface associated with a given endpoint. This object can be used to uniquely iden… |
| 1.3.6.1.2.1.153.1.2.1.3 | ColumnspdEndGroupName | read-create | current | The policy group name to apply at this endpoint. The value of the spdEndGroupName object is then used as an index into the spdGroupContentsTable to come up wit… |
| 1.3.6.1.2.1.153.1.2.1.4 | ColumnspdEndGroupLastChanged | read-only | current | The value of sysUpTime when this row was last modified or created either through SNMP SETs or by some other external means. If this row has not been modified s… |
| 1.3.6.1.2.1.153.1.2.1.5 | ColumnspdEndGroupStorageType | read-create | current | The storage type for this row. Rows in this table that were created through an external process MAY have a storage type of readOnly or permanent. For a storage… |
| 1.3.6.1.2.1.153.1.2.1.6 | ColumnspdEndGroupRowStatus | read-create | current | This object indicates the conceptual status of this row. The value of this object has no effect on whether other objects in this conceptual row can be modified… |
| 1.3.6.1.2.1.153.1.3 | TablespdGroupContentsTable | not-accessible | current | This table contains a list of rules and/or subgroups contained within a given policy group. For a given value of spdGroupContName, the set of rows sharing that… |
| 1.3.6.1.2.1.153.1.3.1 | RowspdGroupContentsEntry | not-accessible | current | Defines a given sub-component within a policy group. A sub-component is either a rule or another group as indicated by spdGroupContComponentType and referenced… |
| 1.3.6.1.2.1.153.1.3.1.1 | ColumnspdGroupContName | not-accessible | current | The administrative name of the group associated with this row. A 'group' is formed by all the rows in this table that have the same value of this object. |
| 1.3.6.1.2.1.153.1.3.1.2 | ColumnspdGroupContPriority | not-accessible | current | The priority (sequence number) of the sub-component in a group that this row represents. This value indicates the order that each row of this table MUST be pro… |
| 1.3.6.1.2.1.153.1.3.1.3 | ColumnspdGroupContFilter | read-create | current | spdGroupContFilter points to a filter that is evaluated to determine whether the spdGroupContComponentName within this row is exercised. Managers can use this … |
| 1.3.6.1.2.1.153.1.3.1.4 | ColumnspdGroupContComponentType | read-create | current | Indicates whether the spdGroupContComponentName object is the name of another group defined within the spdGroupContentsTable or is the name of a rule defined w… |
| 1.3.6.1.2.1.153.1.3.1.5 | ColumnspdGroupContComponentName | read-create | current | The name of the policy rule or subgroup contained within this row, as indicated by the spdGroupContComponentType object. |
| 1.3.6.1.2.1.153.1.3.1.6 | ColumnspdGroupContLastChanged | read-only | current | The value of sysUpTime when this row was last modified or created either through SNMP SETs or by some other external means. If this row has not been modified s… |
| 1.3.6.1.2.1.153.1.3.1.7 | ColumnspdGroupContStorageType | read-create | current | The storage type for this row. Rows in this table that were created through an external process MAY have a storage type of readOnly or permanent. For a storage… |
| 1.3.6.1.2.1.153.1.3.1.8 | ColumnspdGroupContRowStatus | read-create | current | This object indicates the conceptual status of this row. The value of this object has no effect on whether other objects in this conceptual row can be modified… |
| 1.3.6.1.2.1.153.1.4 | TablespdRuleDefinitionTable | not-accessible | current | This table defines a rule by associating a filter or a set of filters to an action to be executed. |
| 1.3.6.1.2.1.153.1.4.1 | RowspdRuleDefinitionEntry | not-accessible | current | A row defining a particular rule definition. A rule definition binds a filter pointer to an action pointer. |
| 1.3.6.1.2.1.153.1.4.1.1 | ColumnspdRuleDefName | not-accessible | current | spdRuleDefName is the administratively assigned name of the rule referred to by the spdGroupContComponentName object. |
| 1.3.6.1.2.1.153.1.4.1.2 | ColumnspdRuleDefDescription | read-create | current | A user defined string. This field MAY be used for administrative tracking purposes. |
| 1.3.6.1.2.1.153.1.4.1.3 | ColumnspdRuleDefFilter | read-create | current | spdRuleDefFilter points to a filter that is used to evaluate whether the action associated with this row is executed or not. The action will only execute if th… |
| 1.3.6.1.2.1.153.1.4.1.4 | ColumnspdRuleDefFilterNegated | read-create | current | spdRuleDefFilterNegated specifies whether or not the results of the filter referenced by the spdRuleDefFilter object is negated. |
| 1.3.6.1.2.1.153.1.4.1.5 | ColumnspdRuleDefAction | read-create | current | This column points to the action to be taken. It MAY, but is not limited to, point to a row in one of the following tables: spdCompoundActionTable ipsaSaPrecon… |
| 1.3.6.1.2.1.153.1.4.1.6 | ColumnspdRuleDefAdminStatus | read-create | current | Indicates whether the current rule definition is considered active. If the value is enabled, the rule MUST be evaluated when processing packets. If the value i… |
| 1.3.6.1.2.1.153.1.4.1.7 | ColumnspdRuleDefLastChanged | read-only | current | The value of sysUpTime when this row was last modified or created either through SNMP SETs or by some other external means. If this row has not been modified s… |
| 1.3.6.1.2.1.153.1.4.1.8 | ColumnspdRuleDefStorageType | read-create | current | The storage type for this row. Rows in this table that were created through an external process MAY have a storage type of readOnly or permanent. For a storage… |
| 1.3.6.1.2.1.153.1.4.1.9 | ColumnspdRuleDefRowStatus | read-create | current | This object indicates the conceptual status of this row. The value of this object has no effect on whether other objects in this conceptual row can be modified… |
| 1.3.6.1.2.1.153.1.5 | TablespdCompoundFilterTable | not-accessible | current | A table defining compound filters and their associated parameters. A row in this table can be pointed to by a spdRuleDefFilter object. |
| 1.3.6.1.2.1.153.1.5.1 | RowspdCompoundFilterEntry | not-accessible | current | An entry in the spdCompoundFilterTable. Each entry in this table represents a compound filter. A filter defined by this table is considered to have a TRUE retu… |
| 1.3.6.1.2.1.153.1.5.1.1 | ColumnspdCompFiltName | not-accessible | current | A user definable string. This value is used as an index into this table. |
| 1.3.6.1.2.1.153.1.5.1.2 | ColumnspdCompFiltDescription | read-create | current | A user definable string. This field MAY be used for your administrative tracking purposes. |
| 1.3.6.1.2.1.153.1.5.1.3 | ColumnspdCompFiltLogicType | read-create | current | Indicates whether the sub-component filters of this compound filter are functionally ANDed or ORed together. |
| 1.3.6.1.2.1.153.1.5.1.4 | ColumnspdCompFiltLastChanged | read-only | current | The value of sysUpTime when this row was last modified or created either through SNMP SETs or by some other external means. If this row has not been modified s… |
| 1.3.6.1.2.1.153.1.5.1.5 | ColumnspdCompFiltStorageType | read-create | current | The storage type for this row. Rows in this table that were created through an external process MAY have a storage type of readOnly or permanent. For a storage… |
| 1.3.6.1.2.1.153.1.5.1.6 | ColumnspdCompFiltRowStatus | read-create | current | This object indicates the conceptual status of this row. The value of this object has no effect on whether other objects in this conceptual row can be modified… |
| 1.3.6.1.2.1.153.1.6 | TablespdSubfiltersTable | not-accessible | current | This table defines a list of filters contained within a given compound filter defined in the spdCompoundFilterTable. |
| 1.3.6.1.2.1.153.1.6.1 | RowspdSubfiltersEntry | not-accessible | current | An entry in the spdSubfiltersTable. There is an entry in this table for each sub-filter of all compound filters present in the spdCompoundFilterTable. |
| 1.3.6.1.2.1.153.1.6.1.1 | ColumnspdSubFiltPriority | not-accessible | current | The priority of a given filter within a compound filter. The order of execution is from lowest to highest priority value (i.e., priority 0 before priority 1, 1… |
| 1.3.6.1.2.1.153.1.6.1.2 | ColumnspdSubFiltSubfilter | read-create | current | The OID of the contained filter. The value of this object is a VariablePointer that references the filter to be included in this compound filter. The following… |
| 1.3.6.1.2.1.153.1.6.1.3 | ColumnspdSubFiltSubfilterIsNegated | read-create | current | Indicates whether or not the result of applying this sub-filter is negated. |
| 1.3.6.1.2.1.153.1.6.1.4 | ColumnspdSubFiltLastChanged | read-only | current | The value of sysUpTime when this row was last modified or created either through SNMP SETs or by some other external means. If this row has not been modified s… |
| 1.3.6.1.2.1.153.1.6.1.5 | ColumnspdSubFiltStorageType | read-create | current | The storage type for this row. Rows in this table that were created through an external process MAY have a storage type of readOnly or permanent. For a storage… |
| 1.3.6.1.2.1.153.1.6.1.6 | ColumnspdSubFiltRowStatus | read-create | current | This object indicates the conceptual status of this row. The value of this object has no effect on whether other objects in this conceptual row can be modified… |
| 1.3.6.1.2.1.153.1.7 | NodespdStaticFilters | |||
| 1.3.6.1.2.1.153.1.7.1 | ScalarspdTrueFilter | read-only | current | This scalar indicates a (automatic) true result for a filter. That is, this is a filter that is always true; it is useful for adding as a default filter for a … |
| 1.3.6.1.2.1.153.1.7.1.0 | NodespdTrueFilterInstance | |||
| 1.3.6.1.2.1.153.1.8 | TablespdIpOffsetFilterTable | not-accessible | current | This table contains a list of filter definitions to be used within the spdRuleDefinitionTable or the spdSubfiltersTable. This type of filter is used to compare… |
| 1.3.6.1.2.1.153.1.8.1 | RowspdIpOffsetFilterEntry | not-accessible | current | A definition of a particular filter. |
| 1.3.6.1.2.1.153.1.8.1.1 | ColumnspdIpOffFiltName | not-accessible | current | The administrative name for this filter. |
| 1.3.6.1.2.1.153.1.8.1.2 | ColumnspdIpOffFiltOffset | read-create | current | This is the byte offset from the front of the entire IP packet where the value or arithmetic comparison is done. A value of '0' indicates the first byte of the… |
| 1.3.6.1.2.1.153.1.8.1.3 | ColumnspdIpOffFiltType | read-create | current | This defines the various tests that are used when evaluating a given filter. The various tests definable in this table are as follows: equal: - Tests if the OC… |
| 1.3.6.1.2.1.153.1.8.1.4 | ColumnspdIpOffFiltValue | read-create | current | spdIpOffFiltValue is used for match comparisons of a packet at spdIpOffFiltOffset. |
| 1.3.6.1.2.1.153.1.8.1.5 | ColumnspdIpOffFiltLastChanged | read-only | current | The value of sysUpTime when this row was last modified or created either through SNMP SETs or by some other external means. If this row has not been modified s… |
| 1.3.6.1.2.1.153.1.8.1.6 | ColumnspdIpOffFiltStorageType | read-create | current | The storage type for this row. Rows in this table that were created through an external process MAY have a storage type of readOnly or permanent. For a storage… |
| 1.3.6.1.2.1.153.1.8.1.7 | ColumnspdIpOffFiltRowStatus | read-create | current | This object indicates the conceptual status of this row. The value of this object has no effect on whether other objects in this conceptual row can be modified… |
| 1.3.6.1.2.1.153.1.9 | TablespdTimeFilterTable | not-accessible | current | Defines a table of filters that can be used to effectively enable or disable policies based on a valid time range. |
| 1.3.6.1.2.1.153.1.9.1 | RowspdTimeFilterEntry | not-accessible | current | A row describing a given time frame for which a policy is filtered on to activate or deactivate the rule. If all the column objects in a row are true for the c… |
| 1.3.6.1.2.1.153.1.9.1.1 | ColumnspdTimeFiltName | not-accessible | current | An administratively assigned name for this filter. |
| 1.3.6.1.2.1.153.1.9.1.2 | ColumnspdTimeFiltPeriod | read-create | current | The valid time period for this filter. This column is considered 'true' if the current time is within the range of this object. |
| 1.3.6.1.2.1.153.1.9.1.3 | ColumnspdTimeFiltMonthOfYearMask | read-create | current | A bit mask that indicates acceptable months of the year. This column evaluates to 'true' if the current month's bit is set. |
| 1.3.6.1.2.1.153.1.9.1.4 | ColumnspdTimeFiltDayOfMonthMask | read-create | current | Defines which days of the month the current time is valid for. It is a sequence of 64 BITS, where each BIT represents a corresponding day of the month in forwa… |
| 1.3.6.1.2.1.153.1.9.1.5 | ColumnspdTimeFiltDayOfWeekMask | read-create | current | A bit mask that defines which days of the week that the current time is valid for. This column evaluates to 'true' if the current day of the week's bit is set. |
| 1.3.6.1.2.1.153.1.9.1.6 | ColumnspdTimeFiltTimeOfDayMask | read-create | current | Indicates the start and end time of the day for which this filter evaluates to true. The date portions of the spdTimePeriod TC are ignored for purposes of eval… |
| 1.3.6.1.2.1.153.1.9.1.7 | ColumnspdTimeFiltLastChanged | read-only | current | The value of sysUpTime when this row was last modified or created either through SNMP SETs or by some other external means. If this row has not been modified s… |
| 1.3.6.1.2.1.153.1.9.1.8 | ColumnspdTimeFiltStorageType | read-create | current | The storage type for this row. Rows in this table that were created through an external process MAY have a storage type of readOnly or permanent. For a storage… |
| 1.3.6.1.2.1.153.1.9.1.9 | ColumnspdTimeFiltRowStatus | read-create | current | This object indicates the conceptual status of this row. The value of this object has no effect on whether other objects in this conceptual row can be modified… |
| 1.3.6.1.2.1.153.1.10 | TablespdIpsoHeaderFilterTable | not-accessible | current | This table contains a list of IPSO header filter definitions to be used within the spdRuleDefinitionTable or the spdSubfiltersTable. IPSO headers and their val… |
| 1.3.6.1.2.1.153.1.10.1 | RowspdIpsoHeaderFilterEntry | not-accessible | current | A definition of a particular filter. |
| 1.3.6.1.2.1.153.1.10.1.1 | ColumnspdIpsoHeadFiltName | not-accessible | current | The administrative name for this filter. |
| 1.3.6.1.2.1.153.1.10.1.2 | ColumnspdIpsoHeadFiltType | read-create | current | This object indicates which of the IPSO header field a packet is filtered on for this row. If this object is set to classification(0), the spdIpsoHeadFiltClass… |
| 1.3.6.1.2.1.153.1.10.1.3 | ColumnspdIpsoHeadFiltClassification | read-create | current | This object indicates the IPSO classification header field value that the packet MUST have for this row to evaluate to 'true'. The values of these enumerations… |
| 1.3.6.1.2.1.153.1.10.1.4 | ColumnspdIpsoHeadFiltProtectionAuth | read-create | current | This object indicates the IPSO protection authority header field value that the packet MUST have for this row to evaluate to 'true'. The values of these enumer… |
| 1.3.6.1.2.1.153.1.10.1.5 | ColumnspdIpsoHeadFiltLastChanged | read-only | current | The value of sysUpTime when this row was last modified or created either through SNMP SETs or by some other external means. If this row has not been modified s… |
| 1.3.6.1.2.1.153.1.10.1.6 | ColumnspdIpsoHeadFiltStorageType | read-create | current | The storage type for this row. Rows in this table that were created through an external process MAY have a storage type of readOnly or permanent. For a storage… |
| 1.3.6.1.2.1.153.1.10.1.7 | ColumnspdIpsoHeadFiltRowStatus | read-create | current | This object indicates the conceptual status of this row. The value of this object has no effect on whether other objects in this conceptual row can be modified… |
| 1.3.6.1.2.1.153.1.11 | TablespdCompoundActionTable | not-accessible | current | Table used to allow multiple actions to be associated with a rule. It uses the spdSubactionsTable to do this. The rows from spdSubactionsTable that are partial… |
| 1.3.6.1.2.1.153.1.11.1 | RowspdCompoundActionEntry | not-accessible | current | A row in the spdCompoundActionTable. |
| 1.3.6.1.2.1.153.1.11.1.1 | ColumnspdCompActName | not-accessible | current | This is an administratively assigned name of this compound action. |
| 1.3.6.1.2.1.153.1.11.1.2 | ColumnspdCompActExecutionStrategy | read-create | current | This object indicates how the sub-actions are executed based on the success of the actions as they finish executing. doAll - run each sub-action regardless of … |
| 1.3.6.1.2.1.153.1.11.1.3 | ColumnspdCompActLastChanged | read-only | current | The value of sysUpTime when this row was last modified or created either through SNMP SETs or by some other external means. If this row has not been modified s… |
| 1.3.6.1.2.1.153.1.11.1.4 | ColumnspdCompActStorageType | read-create | current | The storage type for this row. Rows in this table that were created through an external process MAY have a storage type of readOnly or permanent. For a storage… |
| 1.3.6.1.2.1.153.1.11.1.5 | ColumnspdCompActRowStatus | read-create | current | This object indicates the conceptual status of this row. The value of this object has no effect on whether other objects in this conceptual row can be modified… |
| 1.3.6.1.2.1.153.1.12 | TablespdSubactionsTable | not-accessible | current | This table contains a list of the sub-actions within a given compound action. Compound actions executing these actions MUST execute them in series based on the… |
| 1.3.6.1.2.1.153.1.12.1 | RowspdSubactionsEntry | not-accessible | current | A row containing a reference to a given compound-action sub-action. |
| 1.3.6.1.2.1.153.1.12.1.1 | ColumnspdSubActPriority | not-accessible | current | The priority of a given sub-action within a compound action. The order in which sub-actions MUST be executed are based on the value from this column, with the … |
| 1.3.6.1.2.1.153.1.12.1.2 | ColumnspdSubActSubActionName | read-create | current | This column points to the action to be taken. It MAY, but is not limited to, point to a row in one of the following tables: spdCompoundActionTable - Allowing r… |
| 1.3.6.1.2.1.153.1.12.1.3 | ColumnspdSubActLastChanged | read-only | current | The value of sysUpTime when this row was last modified or created either through SNMP SETs or by some other external means. If this row has not been modified s… |
| 1.3.6.1.2.1.153.1.12.1.4 | ColumnspdSubActStorageType | read-create | current | The storage type for this row. Rows in this table that were created through an external process MAY have a storage type of readOnly or permanent. For a storage… |
| 1.3.6.1.2.1.153.1.12.1.5 | ColumnspdSubActRowStatus | read-create | current | This object indicates the conceptual status of this row. The value of this object has no effect on whether other objects in this conceptual row can be modified… |
| 1.3.6.1.2.1.153.1.13 | NodespdStaticActions | |||
| 1.3.6.1.2.1.153.1.13.1 | ScalarspdDropAction | read-only | current | This scalar indicates that a packet MUST be dropped and SHOULD NOT have action/packet logging. |
| 1.3.6.1.2.1.153.1.13.2 | ScalarspdDropActionLog | read-only | current | This scalar indicates that a packet MUST be dropped and SHOULD have action/packet logging. |
| 1.3.6.1.2.1.153.1.13.3 | ScalarspdAcceptAction | read-only | current | This Scalar indicates that a packet MUST be accepted (pass-through) and SHOULD NOT have action/packet logging. |
| 1.3.6.1.2.1.153.1.13.4 | ScalarspdAcceptActionLog | read-only | current | This scalar indicates that a packet MUST be accepted (pass-through) and SHOULD have action/packet logging. |
| 1.3.6.1.2.1.153.2 | NodespdNotificationObjects | |||
| 1.3.6.1.2.1.153.2.0 | NodespdNotifications | |||
| 1.3.6.1.2.1.153.2.0.1 | NotificationspdActionNotification | current | Notification that an action was executed by a rule. Only actions with logging enabled will result in this notification getting sent. The object includes the sp… | |
| 1.3.6.1.2.1.153.2.0.2 | NotificationspdPacketNotification | current | Notification that a packet passed through a Security Association (SA). Only SAs created by actions with packet logging enabled will result in this notification… | |
| 1.3.6.1.2.1.153.2.1 | NodespdNotificationVariables | |||
| 1.3.6.1.2.1.153.2.1.1 | ScalarspdActionExecuted | accessible-for-notify | current | Points to the action instance that was executed that resulted in the notification being sent. |
| 1.3.6.1.2.1.153.2.1.2 | ScalarspdIPEndpointAddType | accessible-for-notify | current | Contains the address type for the interface that the notification triggering packet is passing through. |
| 1.3.6.1.2.1.153.2.1.3 | ScalarspdIPEndpointAddress | accessible-for-notify | current | Contains the interface address for the interface that the notification triggering packet is passing through. The format of this object is specified by the spdI… |
| 1.3.6.1.2.1.153.2.1.4 | ScalarspdIPSourceType | accessible-for-notify | current | Contains the source address type of the packet that triggered the notification. |
| 1.3.6.1.2.1.153.2.1.5 | ScalarspdIPSourceAddress | accessible-for-notify | current | Contains the source address of the packet that triggered the notification. The format of this object is specified by the spdIPSourceType object. |
| 1.3.6.1.2.1.153.2.1.6 | ScalarspdIPDestinationType | accessible-for-notify | current | Contains the destination address type of the packet that triggered the notification. |
| 1.3.6.1.2.1.153.2.1.7 | ScalarspdIPDestinationAddress | accessible-for-notify | current | Contains the destination address of the packet that triggered the notification. The format of this object is specified by the spdIPDestinationType object. |
| 1.3.6.1.2.1.153.2.1.8 | ScalarspdPacketDirection | accessible-for-notify | current | Indicates if the packet that triggered the action in questions was ingress (inbound) or egress (outbound). |
| 1.3.6.1.2.1.153.2.1.9 | ScalarspdPacketPart | accessible-for-notify | current | spdPacketPart is the front part of the full IP packet that triggered this notification. The initial size limit is determined by the smaller of the size, indica… |
| 1.3.6.1.2.1.153.3 | NodespdConformanceObjects | |||
| 1.3.6.1.2.1.153.3.1 | NodespdCompliances | |||
| 1.3.6.1.2.1.153.3.1.1 | CompliancespdRuleFilterFullCompliance | not-accessible | current | The compliance statement for SNMP entities that include an IPsec MIB implementation with Endpoint, Rules, and filters support. When this MIB is implemented wit… |
| 1.3.6.1.2.1.153.3.1.2 | CompliancespdLoggingCompliance | current | The compliance statement for SNMP entities that support sending notifications when actions are invoked. | |
| 1.3.6.1.2.1.153.3.1.3 | CompliancespdRuleFilterReadOnlyCompliance | read-only | current | The compliance statement for SNMP entities that include an IPsec MIB implementation with Endpoint, Rules, and filters support. If this MIB is implemented witho… |
| 1.3.6.1.2.1.153.3.2 | NodespdGroups | |||
| 1.3.6.1.2.1.153.3.2.1 | GroupspdEndpointGroup | current | This group is made up of objects from the IPsec Policy Endpoint Table. | |
| 1.3.6.1.2.1.153.3.2.2 | GroupspdGroupContentsGroup | current | This group is made up of objects from the IPsec Policy Group Contents Table. | |
| 1.3.6.1.2.1.153.3.2.3 | GroupspdIpsecSystemPolicyNameGroup | current | This group is made up of objects represent the System Policy Group Names. | |
| 1.3.6.1.2.1.153.3.2.4 | GroupspdRuleDefinitionGroup | current | This group is made up of objects from the IPsec Policy Rule Definition Table. | |
| 1.3.6.1.2.1.153.3.2.5 | GroupspdCompoundFilterGroup | current | This group is made up of objects from the IPsec Policy Compound Filter Table and Sub-Filter Table Group. | |
| 1.3.6.1.2.1.153.3.2.6 | GroupspdStaticFilterGroup | current | The static filter group. Currently this is just a true filter. | |
| 1.3.6.1.2.1.153.3.2.7 | GroupspdIPOffsetFilterGroup | current | This group is made up of objects from the IPsec Policy IP Offset Filter Table. | |
| 1.3.6.1.2.1.153.3.2.8 | GroupspdTimeFilterGroup | current | This group is made up of objects from the IPsec Policy Time Filter Table. | |
| 1.3.6.1.2.1.153.3.2.9 | GroupspdIpsoHeaderFilterGroup | current | This group is made up of objects from the IPsec Policy IPSO Header Filter Table. | |
| 1.3.6.1.2.1.153.3.2.10 | GroupspdStaticActionGroup | current | This group is made up of objects from the IPsec Policy Static Actions. | |
| 1.3.6.1.2.1.153.3.2.11 | GroupspdCompoundActionGroup | current | The IPsec Policy Compound Action Table and Actions In Compound Action Table Group. | |
| 1.3.6.1.2.1.153.3.2.12 | GroupspdActionLoggingObjectGroup | current | This group is made up of all the Notification objects for this MIB. | |
| 1.3.6.1.2.1.153.3.2.13 | GroupspdActionNotificationGroup | current | This group is made up of all the Notifications for this MIB. | |
| 1.3.6.1.2.1.153.4 | NodespdActions |
Type Definitions
| Name | Syntax | Status | Description |
|---|---|---|---|
| SpdAdminStatus | INTEGER { enabled(1), disabled(2) } | current | The SpdAdminStatus is used to specify the administrative status of an object. Objects that are disabled MUST NOT be used by the packet processing engine. |
| SpdBooleanOperator | INTEGER { or(1), and(2) } | current | The SpdBooleanOperator operator is used to specify whether sub-components in a decision-making process are ANDed or ORed together to decide if the resulting expression is true or false. |
| SpdIPPacketLogging | Integer32 (-1..65535) | current | SpdIPPacketLogging specifies whether an audit message SHOULD be logged if a packet is passed through a Security Association (SA) and if some of that packet is included in the log event. A value of '-1' indicates no logg… |
| SpdTimePeriod | OCTET STRING (SIZE (0..31)) | current | This property identifies an overall range of calendar dates and time. In a boolean context, a value within this time range, inclusive, is considered true. This information is encoded as an octet string using the UTF-8 t… |