JNX-OPT-IF-EXT-MIB
237 objects
The MIB module to describe Black Link extension to rfc3591. It is the enterprise version of the draft draft-galikunze-ccamp-g-698-2-snmp-mib-02
Imported Objects
| IF-MIB | ifIndex |
| JNX-OPT-IF-MIB | JnxoptIfDirectionality jnxoptIfMibModule jnxoptIfOChConfigEntry jnxoptIfOChSinkCurrentEntry |
| SNMP-FRAMEWORK-MIB | SnmpAdminString |
| SNMPv2-CONF | MODULE-COMPLIANCE OBJECT-GROUP |
| SNMPv2-SMI | Counter64 Gauge32 Integer32 MODULE-IDENTITY NOTIFICATION-TYPE OBJECT-TYPE transmission Unsigned32 |
| SNMPv2-TC | DateAndTime DisplayString RowPointer RowStatus TEXTUAL-CONVENTION TruthValue |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.2636.3.73.1.3 | IdentityjnxoptIfExtMibModule | The MIB module to describe Black Link extension to rfc3591. It is the enterprise version of the draft draft-galikunze-ccamp-g-698-2-snmp-mib-02 | ||
| 1.3.6.1.4.1.2636.3.73.1.3.0 | NodejnxoptIfOTNNotifications | |||
| 1.3.6.1.4.1.2636.3.73.1.3.0.1 | NotificationjnxoptIfOTNOChOTUkAlarmSet | current | Notification of a recently set OTN alarm of Layer and Type. | |
| 1.3.6.1.4.1.2636.3.73.1.3.0.2 | NotificationjnxoptIfOTNOChOTUkAlarmClear | current | Notification of a recently clear OTN alarm of Layer and Type. | |
| 1.3.6.1.4.1.2636.3.73.1.3.0.3 | NotificationjnxoptIfOTNODUkTcmAlarmSet | current | Notification of a recently set OTN alarm of Layer and Type. | |
| 1.3.6.1.4.1.2636.3.73.1.3.0.4 | NotificationjnxoptIfOTNODUkTcmAlarmClear | current | Notification of a recently clear OTN alarm of Layer and Type. | |
| 1.3.6.1.4.1.2636.3.73.1.3.1 | NodejnxoptIfOPSmEntry | |||
| 1.3.6.1.4.1.2636.3.73.1.3.1.1 | TablejnxoptIfOPSmConfigTable | not-accessible | current | A table of OPS General config parameters. |
| 1.3.6.1.4.1.2636.3.73.1.3.1.1.1 | RowjnxoptIfOPSmConfigEntry | not-accessible | current | An conceptual row of OPS General config parameters. |
| 1.3.6.1.4.1.2636.3.73.1.3.1.1.1.1 | ColumnjnxoptIfOPSmDirectionality | read-only | current | Indicates the directionality of the entity. |
| 1.3.6.1.4.1.2636.3.73.1.3.1.1.1.2 | ColumnjnxoptIfOPSmFiberTypeRecommendation | read-only | current | Fiber type as per fibre types are chosen from those defined in ITU-T Recs G.652, G.653, G.654, G.655, G.656 and G.657. |
| 1.3.6.1.4.1.2636.3.73.1.3.1.1.1.3 | ColumnjnxoptIfOPSmFiberTypeCategory | read-only | current | Fiber type as per fibre types are chosen from those defined in ITU-T Recs G.652, G.653, and G.655. The categories are A, B, C, D and E. |
| 1.3.6.1.4.1.2636.3.73.1.3.2 | NodejnxoptIfOChSrcSinkGroup | |||
| 1.3.6.1.4.1.2636.3.73.1.3.2.1 | TablejnxoptIfOChConfigExtTable | not-accessible | current | A table of Och General config extension parameters |
| 1.3.6.1.4.1.2636.3.73.1.3.2.1.1 | RowjnxoptIfOChConfigExtEntry | not-accessible | current | A conceptual row that contains OCh configuration extension information of an interface. |
| 1.3.6.1.4.1.2636.3.73.1.3.2.1.1.1 | ColumnjnxoptIfOChMiminumChannelSpacing | read-only | current | A minimum nominal difference in frequency (GHz) between two adjacent channels. |
| 1.3.6.1.4.1.2636.3.73.1.3.2.1.1.2 | ColumnjnxoptIfOChBitRateLineCoding | read-only | current | Optical tributary signal class NRZ 2.5G (from nominally 622 Mbit/s to nominally 2.67 Gbit/s) NRZ 10G (nominally 2.4 Gbit/s to nominally 10.71 Gbit/s) |
| 1.3.6.1.4.1.2636.3.73.1.3.2.1.1.3 | ColumnjnxoptIfOChFEC | read-write | current | This parameter indicates what Forward Error Correction (FEC) code is used at Source and Sink. GFEC (from G709) and the I.x EFEC's (G.975 - Table I.1 super FEC)… |
| 1.3.6.1.4.1.2636.3.73.1.3.2.1.1.4 | ColumnjnxoptIfOChSinkMaximumBERMantissa | read-only | current | This parameter indicate the maximum Bit(mantissa) error rate can be supported by the application at the Receiver. In case of FEC applications it is intended af… |
| 1.3.6.1.4.1.2636.3.73.1.3.2.1.1.5 | ColumnjnxoptIfOChSinkMaximumBERExponent | read-only | current | This parameter indicate the maximum Bit(exponent) error rate can be supported by the application at the Receiver. In case of FEC applications it is intended af… |
| 1.3.6.1.4.1.2636.3.73.1.3.2.1.1.6 | ColumnjnxoptIfOChMinWavelength | read-only | current | This parameter indicate minimum wavelength spectrum in a definite wavelength Band (L, C and S) |
| 1.3.6.1.4.1.2636.3.73.1.3.2.1.1.7 | ColumnjnxoptIfOChMaxWavelength | read-only | current | This parameter indicate maximum wavelength spectrum in a definite wavelength Band (L, C and S) |
| 1.3.6.1.4.1.2636.3.73.1.3.2.1.1.8 | ColumnjnxoptIfOChWavelength | read-write | current | This parameter indicates the wavelength value. |
| 1.3.6.1.4.1.2636.3.73.1.3.2.1.1.9 | ColumnjnxoptIfOChVendorTransceiverClass | read-only | current | As defined in G.698 Vendors can summarize a set of parameters in a single proprietary parameter: the Class of transceiver. The Transceiver classification will … |
| 1.3.6.1.4.1.2636.3.73.1.3.2.1.1.10 | ColumnjnxoptIfOChOpticalInterfaceApplicationCode | read-only | current | This parameter indicates the transceiver application code at Ss and Rs as defined in [ITU.G698.2] Chapter 5.3 |
| 1.3.6.1.4.1.2636.3.73.1.3.2.1.1.11 | ColumnjnxoptIfOChLaserAdminState | read-write | current | The configured State of the laser: 0 - disabled 1 - enabled |
| 1.3.6.1.4.1.2636.3.73.1.3.2.1.1.12 | ColumnjnxoptIfOChLaserOperationalState | read-only | current | The Operational Status of Laser: 0 - disabled 1 - Enabled 2 - fault 3 - degraded |
| 1.3.6.1.4.1.2636.3.73.1.3.2.1.1.13 | ColumnjnxoptIfOChAdminState | read-write | current | The Administrative Status of an Interface: 0 - Out of Service 1 - In Service |
| 1.3.6.1.4.1.2636.3.73.1.3.2.1.1.14 | ColumnjnxoptIfOChOperationalState | read-only | current | The Operational Status of an Interface: 0 - disabled 1 - enabled 2 - Fault 3 - Degraded |
| 1.3.6.1.4.1.2636.3.73.1.3.2.2 | TablejnxoptIfOChSrcConfigTable | not-accessible | current | A configuration table of OCh Src (Ss) parameters. |
| 1.3.6.1.4.1.2636.3.73.1.3.2.2.1 | RowjnxoptIfOChSrcConfigEntry | not-accessible | current | A conceptual row that contains the Src (Ss) configuration parameters for a given interface. |
| 1.3.6.1.4.1.2636.3.73.1.3.2.2.1.1 | ColumnjnxoptIfOChMinimumMeanChannelOutputPower | read-only | current | The minimum mean launched power at Ss is the average power (in dbm) of a pseudo-random data sequence coupled into the DWDM link. |
| 1.3.6.1.4.1.2636.3.73.1.3.2.2.1.2 | ColumnjnxoptIfOChMaximumMeanChannelOutputPower | read-only | current | The maximum mean launched power at Ss is the average power (in dbm) of a pseudo-random data sequence coupled into the DWDM link. |
| 1.3.6.1.4.1.2636.3.73.1.3.2.2.1.3 | ColumnjnxoptIfOChMinimumCentralFrequency | read-only | current | The minimum central frequency is the nominal single-channel frequency (in THz) on which the digital coded information of the particular optical channel is modu… |
| 1.3.6.1.4.1.2636.3.73.1.3.2.2.1.4 | ColumnjnxoptIfOChMaximumCentralFrequency | read-only | current | The maximum central frequency is the nominal single-channel frequency (in THz) on which the digital coded information of the particular optical channel is modu… |
| 1.3.6.1.4.1.2636.3.73.1.3.2.2.1.5 | ColumnjnxoptIfOChMaximumSpectralExcursion | read-only | current | This is the maximum acceptable difference between the nominal central frequency (in GHz) of the channel and the minus 15 dB points of the transmitter spectrum … |
| 1.3.6.1.4.1.2636.3.73.1.3.2.2.1.6 | ColumnjnxoptIfOChMaximumTxDispersionOSNRPenalty | read-only | current | Defines a reference receiver that this penalty is measured with. Lowest OSNR at Ss with worst case (residual) dispersion minus the Lowest OSNR at Ss with no di… |
| 1.3.6.1.4.1.2636.3.73.1.3.2.3 | TablejnxoptIfOChSrcSinkConfigTable | not-accessible | current | A table of paramters for the optical path from Src to Sink (Ss to Rs). |
| 1.3.6.1.4.1.2636.3.73.1.3.2.3.1 | RowjnxoptIfOChSrcSinkConfigEntry | not-accessible | current | A conceptual row that contains the optical path Src-Sink (Ss-Rs) configuration parameters for a given interface. |
| 1.3.6.1.4.1.2636.3.73.1.3.2.3.1.1 | ColumnjnxoptIfOChSrcSinkMinimumChromaticDispersion | read-only | current | These parameters define the minimum value of the optical path 'end to end chromatic dispersion' (in ps/nm) that the system shall be able to tolerate. |
| 1.3.6.1.4.1.2636.3.73.1.3.2.3.1.2 | ColumnjnxoptIfOChSrcSinkMaximumChromaticDispersion | read-only | current | These parameters define the maximum value of the optical path 'end to end chromatic dispersion' (in ps/nm) that the system shall be able to tolerate. |
| 1.3.6.1.4.1.2636.3.73.1.3.2.3.1.3 | ColumnjnxoptIfOChSrcSinkMinimumSrcOpticalReturnLoss | read-only | current | These parameter defines minimum optical return loss (in dB) of the cable plant at the source reference point (Src/Ss), including any connectors. |
| 1.3.6.1.4.1.2636.3.73.1.3.2.3.1.4 | ColumnjnxoptIfOChSrcSinkMaximumDiscreteReflectanceSrcToSink | read-only | current | Optical reflectance is defined to be the ratio of the reflected optical power pre.sent at a point, to the optical power incident to that point. Control of refl… |
| 1.3.6.1.4.1.2636.3.73.1.3.2.3.1.5 | ColumnjnxoptIfOChSrcSinkMaximumDifferentialGroupDelay | read-only | current | Differential group delay (DGD) is the time difference between the fractions of a pulse that are transmitted in the two principal states of polarization of an o… |
| 1.3.6.1.4.1.2636.3.73.1.3.2.3.1.6 | ColumnjnxoptIfOChSrcSinkMaximumPolarisationDependentLoss | read-only | current | The polarisation dependent loss (PDL) is the difference (in dB) between the maximum and minimum values of the channel insertion loss (or gain) of the black-lin… |
| 1.3.6.1.4.1.2636.3.73.1.3.2.3.1.7 | ColumnjnxoptIfOChSrcSinkMaximumInterChannelCrosstalk | read-only | current | Inter-channel crosstalk is defined as the ratio of total power in all of the disturbing channels to that in the wanted channel, where the wanted and disturbing… |
| 1.3.6.1.4.1.2636.3.73.1.3.2.3.1.8 | ColumnjnxoptIfOChSrcSinkInterFerometricCrosstalk | read-only | current | This parameter places a requirement on the isolation of a link conforming to the 'black-link' approach such that under the worst case operating conditions the … |
| 1.3.6.1.4.1.2636.3.73.1.3.2.3.1.9 | ColumnjnxoptIfOChSrcSinkOpticalPathOSNRPenalty | read-only | current | The optical path OSNR penalty is defined as the difference between the Lowest OSNR at Rs and Lowest OSNR at Ss that meets the BER requirement. |
| 1.3.6.1.4.1.2636.3.73.1.3.2.4 | TablejnxoptIfOChSinkConfigTable | not-accessible | current | A table of OCh Sink (Rs) configuration parameters. |
| 1.3.6.1.4.1.2636.3.73.1.3.2.4.1 | RowjnxoptIfOChSinkConfigEntry | not-accessible | current | A conceptual row that contains the Sink (Rs) configuration parameters for a given interface. |
| 1.3.6.1.4.1.2636.3.73.1.3.2.4.1.1 | ColumnjnxoptIfOChSinkMinimumMeanIntputPower | read-only | current | The minimum values of the average received power (in dbm at point the Sink (Rs). |
| 1.3.6.1.4.1.2636.3.73.1.3.2.4.1.2 | ColumnjnxoptIfOChSinkMaximumMeanIntputPower | read-only | current | The maximum values of the average received power (in dbm) at point the Sink (Rs). |
| 1.3.6.1.4.1.2636.3.73.1.3.2.4.1.3 | ColumnjnxoptIfOChSinkMinimumOSNR | read-only | current | The minimum optical signal-to-noise ratio (OSNR) is the minimum value of the ratio of the signal power in the wanted channel to the highest noise power density… |
| 1.3.6.1.4.1.2636.3.73.1.3.2.4.1.4 | ColumnjnxoptIfOChSinkOSNRTolerance | read-only | current | The receiver OSNR tolerance is defined as the minimum value of OSNR at point Sink (Rs) that can be tolerated while maintaining the maximum BER of the applicati… |
| 1.3.6.1.4.1.2636.3.73.1.3.3 | NodejnxoptIfOTNPMGroup | |||
| 1.3.6.1.4.1.2636.3.73.1.3.3.1 | TablejnxoptIfOChSinkCurrentExtTable | not-accessible | current | A table of OCh sink etxension to the performance monitoring information for the current 15-minute interval. |
| 1.3.6.1.4.1.2636.3.73.1.3.3.1.1 | RowjnxoptIfOChSinkCurrentExtEntry | not-accessible | current | A conceptual row that contains OCh sink performance monitoring information for an interface for the current 15-minute interval. |
| 1.3.6.1.4.1.2636.3.73.1.3.3.1.1.1 | ColumnjnxoptIfOChSinkCurrentChromaticDispersion | read-only | current | Residual Chromatic Dispersion measured at Rx Transceiver port. |
| 1.3.6.1.4.1.2636.3.73.1.3.3.1.1.2 | ColumnjnxoptIfOChSinkCurrentOSNR | read-only | current | Current Optical Signal to Noise Ratio (OSNR) estimated at Rx Transceiver port . |
| 1.3.6.1.4.1.2636.3.73.1.3.3.1.1.3 | ColumnjnxoptIfOChSinkCurrentQ | read-only | current | 'Q' factor estimated at Rx Transceiver port. |
| 1.3.6.1.4.1.2636.3.73.1.3.3.2 | TablejnxoptIfOTNPMConfigTable | not-accessible | current | A table of performance monitoring configuration for the type 'jnxoptIfOTNPMConfigLayer' layer. |
| 1.3.6.1.4.1.2636.3.73.1.3.3.2.1 | RowjnxoptIfOTNPMConfigEntry | not-accessible | current | A conceptual entry in the performance monitoring configuration for the type 'jnxoptIfOTNPMConfigLayer' layer. |
| 1.3.6.1.4.1.2636.3.73.1.3.3.2.1.1 | ColumnjnxoptIfOTNPMConfigType | not-accessible | current | This parameter indicates the parameters for the table are for the Near End or Far End performance data. 1 - Near End 2 - Far End |
| 1.3.6.1.4.1.2636.3.73.1.3.3.2.1.2 | ColumnjnxoptIfOTNPMConfigLayer | not-accessible | current | This parameter indicates the parameters for the table are for OTUk, ODUk, TCMn performance data. 1 - OTUk 2 - ODUk 3 - TCM The ODUk/TCM sublayer PM is not rela… |
| 1.3.6.1.4.1.2636.3.73.1.3.3.2.1.3 | ColumnjnxoptIfOTNPMConfigTCMLevel | not-accessible | current | This parameter indicates the TCM level (1-6) if the PM is of the type TCM. This will be 0 for OTUK/ODUK. |
| 1.3.6.1.4.1.2636.3.73.1.3.3.2.1.4 | ColumnjnxoptIfOTNPMESRInterval | read-write | current | This parameter indicates the measurement interval for error seconds ratio. |
| 1.3.6.1.4.1.2636.3.73.1.3.3.2.1.5 | ColumnjnxoptIfOTNPMSESRInterval | read-write | current | This parameter indicates the measurement interval for severely error seconds ratio. |
| 1.3.6.1.4.1.2636.3.73.1.3.3.2.1.6 | ColumnjnxoptIfOTNPMValidIntervals | read-only | current | The number of contiguous 15 minute intervals for which valid PM data is available for the particular interface. |
| 1.3.6.1.4.1.2636.3.73.1.3.3.2.1.7 | ColumnjnxoptIfOTNPM15MinBip8Threshold | read-write | current | The number of Bip8 encountered by the interface within any given 15 minutes performance data collection period, which causes the SNMP agent to send jnxoptIf15M… |
| 1.3.6.1.4.1.2636.3.73.1.3.3.2.1.8 | ColumnjnxoptIfOTNPM15MinESsThreshold | read-write | current | The number of ES encountered by the interface within any given 15 minutes performance data collection period, which causes the SNMP agent to send jnxoptIf15Min… |
| 1.3.6.1.4.1.2636.3.73.1.3.3.2.1.9 | ColumnjnxoptIfOTNPM15MinSESsThreshold | read-write | current | The number of SES encountered by the interface within any given 15 minutes performance data collection period, which causes the SNMP agent to send jnxoptIf15Mi… |
| 1.3.6.1.4.1.2636.3.73.1.3.3.2.1.10 | ColumnjnxoptIfOTNPM15MinUASsThreshold | read-write | current | The number of UAS encountered by the interface within any given 15 minutes performance data collection period, which causes the SNMP agent to send jnxoptIf15Mi… |
| 1.3.6.1.4.1.2636.3.73.1.3.3.2.1.11 | ColumnjnxoptIfOTNPM15MinBBEsThreshold | read-write | current | The number of UAS encountered by the interface within any given 15 minutes performance data collection period, which causes the SNMP agent to send jnxoptIf15Mi… |
| 1.3.6.1.4.1.2636.3.73.1.3.3.2.1.12 | ColumnjnxoptIfOTNPM24HourBip8Threshold | read-write | current | The number of Bip8 encountered by the interface within any given 24 Hour performance data collection period, which causes the SNMP agent to send jnxoptIf15MinT… |
| 1.3.6.1.4.1.2636.3.73.1.3.3.2.1.13 | ColumnjnxoptIfOTNPM24HourESsThreshold | read-write | current | The number of ES encountered by the interface within any given 24 hour performance data collection period, which causes the SNMP agent to send jnxoptIf24HourTh… |
| 1.3.6.1.4.1.2636.3.73.1.3.3.2.1.14 | ColumnjnxoptIfOTNPM24HourSESsThreshold | read-write | current | The number of SES encountered by the interface within any given 24 hour performance data collection period, which causes the SNMP agent to send jnxoptIf24HourT… |
| 1.3.6.1.4.1.2636.3.73.1.3.3.2.1.15 | ColumnjnxoptIfOTNPM24HourUASsThreshold | read-write | current | The number of SES encountered by the interface within any given 24 hour performance data collection period, which causes the SNMP agent to send jnxoptIf24HourT… |
| 1.3.6.1.4.1.2636.3.73.1.3.3.2.1.16 | ColumnjnxoptIfOTNPM24HourBBEsThreshold | read-write | current | The number of BBE encountered by the interface within any given 24 hour performance data collection period, which causes the SNMP agent to send jnxoptIf24HourT… |
| 1.3.6.1.4.1.2636.3.73.1.3.3.2.1.17 | ColumnjnxoptIfOTNPMBip8EnableTCA | read-write | current | Enable TCA's - 15minute and 24hr for Bip8 |
| 1.3.6.1.4.1.2636.3.73.1.3.3.2.1.18 | ColumnjnxoptIfOTNPMESsEnableTCA | read-write | current | Enable TCA's - 15minute and 24hr for ESs |
| 1.3.6.1.4.1.2636.3.73.1.3.3.2.1.19 | ColumnjnxoptIfOTNPMSESsEnableTCA | read-write | current | Enable TCA's - 15minute and 24hr for SESs |
| 1.3.6.1.4.1.2636.3.73.1.3.3.2.1.20 | ColumnjnxoptIfOTNPMUASsEnableTCA | read-write | current | Enable TCA's - 15minute and 24hr for UASs |
| 1.3.6.1.4.1.2636.3.73.1.3.3.2.1.21 | ColumnjnxoptIfOTNPMBBEsEnableTCA | read-write | current | Enable TCA's - 15minute and 24hr for BBEs |
| 1.3.6.1.4.1.2636.3.73.1.3.3.3 | TablejnxoptIfOTNPMCurrentTable | not-accessible | current | A table for the Performance monitoring Current Table. |
| 1.3.6.1.4.1.2636.3.73.1.3.3.3.1 | RowjnxoptIfOTNPMCurrentEntry | not-accessible | current | A conceptual entry in the Near end or Far End performance monitoring Current table for the type 'jnxoptIfOTNPMCurrentLayer' layer. |
| 1.3.6.1.4.1.2636.3.73.1.3.3.3.1.1 | ColumnjnxoptIfOTNPMCurrentType | not-accessible | current | This parameter indicates the parameters for the table are for the Near End or Far End performance data. 1 - Near End 2 - Far End |
| 1.3.6.1.4.1.2636.3.73.1.3.3.3.1.2 | ColumnjnxoptIfOTNPMCurrentLayer | not-accessible | current | This parameter indicates the parameters for the table are for OTUk, ODUk, TCMn performance data. 1 - OTUk (OCh which is used for the black link) 2 - ODUk 3 - T… |
| 1.3.6.1.4.1.2636.3.73.1.3.3.3.1.3 | ColumnjnxoptIfOTNPMCurrentTCMLevel | not-accessible | current | This parameter indicates the TCM level (1-6) if the PM is of the type TCM. This will be 0 for OTUK/ODUK. |
| 1.3.6.1.4.1.2636.3.73.1.3.3.3.1.4 | ColumnjnxoptIfOTNPMCurrentSuspectedFlag | read-only | current | If true, the data in this entry may be unreliable. |
| 1.3.6.1.4.1.2636.3.73.1.3.3.3.1.5 | ColumnjnxoptIfOTNPMCurrentBip8 | read-only | current | Number of Failures occurred in an observation period. |
| 1.3.6.1.4.1.2636.3.73.1.3.3.3.1.6 | ColumnjnxoptIfOTNPMCurrentESs | read-only | current | This is the number of seconds in which one or more bits are in error or during which Loss of Signal (LOS) or Alarm Indication Signal (AIS) is detected. |
| 1.3.6.1.4.1.2636.3.73.1.3.3.3.1.7 | ColumnjnxoptIfOTNPMCurrentSESs | read-only | current | The number of seconds which have a severe error. This is the number of seconds in which the bit-error ratio = 1x10Eminus3 or during which Loss of Signal (LOS) … |
| 1.3.6.1.4.1.2636.3.73.1.3.3.3.1.8 | ColumnjnxoptIfOTNPMCurrentUASs | read-only | current | It is the number of unavailable seconds. A period of unavailable time begins at the onset of ten consecutive SES events. These ten seconds are considered to be… |
| 1.3.6.1.4.1.2636.3.73.1.3.3.3.1.9 | ColumnjnxoptIfOTNPMCurrentBBEs | read-only | current | An errored block not occurring as part of an SES. |
| 1.3.6.1.4.1.2636.3.73.1.3.3.3.1.10 | ColumnjnxoptIfOTNPMCurrentESR | read-only | current | The ratio of ES in available time to total seconds in available time during a fixed measurement interval. |
| 1.3.6.1.4.1.2636.3.73.1.3.3.3.1.11 | ColumnjnxoptIfOTNPMCurrentSESR | read-only | current | The ratio of SES in available time to total seconds in available time during a fixed measurement interval. |
| 1.3.6.1.4.1.2636.3.73.1.3.3.3.1.12 | ColumnjnxoptIfOTNPMCurrentBBER | read-only | current | The ratio of BER in available time to total seconds in available time during a fixed measurement interval. |
| 1.3.6.1.4.1.2636.3.73.1.3.3.3.1.13 | ColumnjnxoptIfOTNPMCurrentElapsedTime | read-only | current | Time elapsed for this 15 minute interval |
| 1.3.6.1.4.1.2636.3.73.1.3.3.3.1.14 | ColumnjnxoptIfOTNPMCurSuspectReason | read-only | current | If SuspectedFlag is true, the reson for the PM data being suspect. 0 - not applicable 1 - unknown 2 - new object 3 - interface disabled 4 - clock shift detecte… |
| 1.3.6.1.4.1.2636.3.73.1.3.3.4 | TablejnxoptIfOTNPMIntervalTable | not-accessible | current | A Performance monitoring Interval Table. |
| 1.3.6.1.4.1.2636.3.73.1.3.3.4.1 | RowjnxoptIfOTNPMIntervalEntry | not-accessible | current | A conceptual entry in the Near end or Far End performance monitoring Interval table for the type 'jnxoptIfOTNPMIntervalLayer' layer. |
| 1.3.6.1.4.1.2636.3.73.1.3.3.4.1.1 | ColumnjnxoptIfOTNPMIntervalType | not-accessible | current | This parameter indicates the parameters for the table are for the Near End or Far End performance data. 1 - Near End 2 - Far End |
| 1.3.6.1.4.1.2636.3.73.1.3.3.4.1.2 | ColumnjnxoptIfOTNPMIntervalLayer | not-accessible | current | This parameter indicates the parameters for the table are for OTUk, ODUk, TCMn performance data. 1 - OTUk 2 - ODUk 3 - TCM The ODUk/TCM sublayer PM is not rela… |
| 1.3.6.1.4.1.2636.3.73.1.3.3.4.1.3 | ColumnjnxoptIfOTNPMIntervalTCMLevel | not-accessible | current | This parameter indicates the TCM level (1-6) if the PM is of the type TCM. This will be 0 for OTUK/ODUK. |
| 1.3.6.1.4.1.2636.3.73.1.3.3.4.1.4 | ColumnjnxoptIfOTNPMIntervalNumber | not-accessible | current | A number between 1 and 96, where 1 is the most recently completed 15 minute interval and 96 is the 15 minutes interval completed 23 hours and 45 minutes prior … |
| 1.3.6.1.4.1.2636.3.73.1.3.3.4.1.5 | ColumnjnxoptIfOTNPMIntervalSuspectedFlag | read-only | current | If true, the data in this entry may be unreliable. |
| 1.3.6.1.4.1.2636.3.73.1.3.3.4.1.6 | ColumnjnxoptIfOTNPMIntervalBip8 | read-only | current | Number of Failures occurred in an observation period. |
| 1.3.6.1.4.1.2636.3.73.1.3.3.4.1.7 | ColumnjnxoptIfOTNPMIntervalESs | read-only | current | It is a one-second period in which one or more bits are in error or during which Loss of Signal (LOS) or Alarm Indication Signal (AIS) is detected. |
| 1.3.6.1.4.1.2636.3.73.1.3.3.4.1.8 | ColumnjnxoptIfOTNPMIntervalSESs | read-only | current | The number of seconds which have a severe error. It is a one-second period which has a bit-error ratio = 1x10Eminus3 or during which Loss of Signal (LOS) or Al… |
| 1.3.6.1.4.1.2636.3.73.1.3.3.4.1.9 | ColumnjnxoptIfOTNPMIntervalUASs | read-only | current | It is the number of unavailable seconds in this 15 minute interval. A period of unavailable time begins at the onset of ten consecutive SES events. These ten s… |
| 1.3.6.1.4.1.2636.3.73.1.3.3.4.1.10 | ColumnjnxoptIfOTNPMIntervalBBEs | read-only | current | An errored block not occurring as part of an SES. |
| 1.3.6.1.4.1.2636.3.73.1.3.3.4.1.11 | ColumnjnxoptIfOTNPMIntervalESR | read-only | current | The ratio of ES in available time to total seconds in available time during a fixed measurement interval. |
| 1.3.6.1.4.1.2636.3.73.1.3.3.4.1.12 | ColumnjnxoptIfOTNPMIntervalSESR | read-only | current | The ratio of SES in available time to total seconds in available time during a fixed measurement interval. |
| 1.3.6.1.4.1.2636.3.73.1.3.3.4.1.13 | ColumnjnxoptIfOTNPMIntervalBBER | read-only | current | The ratio of BBE in available time to total seconds in available time during a fixed measurement interval. |
| 1.3.6.1.4.1.2636.3.73.1.3.3.4.1.14 | ColumnjnxoptIfOTNPMIntervalTimeStamp | read-only | current | Time stamp of this interval. |
| 1.3.6.1.4.1.2636.3.73.1.3.3.4.1.15 | ColumnjnxoptIfOTNPMIntSuspectReason | read-only | current | If SuspectedFlag is true, the reson for the PM data being suspect. 0 - not applicable 1 - unknown 2 - new object 3 - interface disabled 4 - clock shift detecte… |
| 1.3.6.1.4.1.2636.3.73.1.3.3.5 | TablejnxoptIfOTNPMCurrentDayTable | not-accessible | current | A Performance monitoring Current Day Table. |
| 1.3.6.1.4.1.2636.3.73.1.3.3.5.1 | RowjnxoptIfOTNPMCurrentDayEntry | not-accessible | current | A conceptual entry in the Near end or Far End performance monitoring Current day table for the type 'jnxoptIfOTNPMCurrentDayLayer' layer. |
| 1.3.6.1.4.1.2636.3.73.1.3.3.5.1.1 | ColumnjnxoptIfOTNPMCurrentDayType | not-accessible | current | This parameter indicates the parameters for the table are for the Near End or Far End performance data. 1 - Near End 2 - Far End |
| 1.3.6.1.4.1.2636.3.73.1.3.3.5.1.2 | ColumnjnxoptIfOTNPMCurrentDayLayer | not-accessible | current | This parameter indicates the parameters for the table are for OTUk, ODUk, TCMn performance data. 1 - OTUk 2 - ODUk 3 - TCM The ODUk/TCM sublayer PM is not rela… |
| 1.3.6.1.4.1.2636.3.73.1.3.3.5.1.3 | ColumnjnxoptIfOTNPMCurrentDayTCMLevel | not-accessible | current | This parameter indicates the TCM level (1-6) if the PM is of the type TCM. This will be 0 for OTUK/ODUK. |
| 1.3.6.1.4.1.2636.3.73.1.3.3.5.1.4 | ColumnjnxoptIfOTNPMCurrentDaySuspectedFlag | read-only | current | If true, the data in this entry may be unreliable. |
| 1.3.6.1.4.1.2636.3.73.1.3.3.5.1.5 | ColumnjnxoptIfOTNPMCurrentDayBip8 | read-only | current | Number of Failures occurred in an observation period. |
| 1.3.6.1.4.1.2636.3.73.1.3.3.5.1.6 | ColumnjnxoptIfOTNPMCurrentDayESs | read-only | current | The number of seconds which have an error. It is a one-second period in which one or more bits are in error or during which Loss of Signal (LOS) or Alarm Indic… |
| 1.3.6.1.4.1.2636.3.73.1.3.3.5.1.7 | ColumnjnxoptIfOTNPMCurrentDaySESs | read-only | current | The number of seconds which have a severe error. It is a one-second period which has a bit-error ratio = 1x10Eminus3 or during which Loss of Signal (LOS) or Al… |
| 1.3.6.1.4.1.2636.3.73.1.3.3.5.1.8 | ColumnjnxoptIfOTNPMCurrentDayUASs | read-only | current | It is the number of unavailable seconds in the cunrrent day. A period of unavailable time begins at the onset of ten consecutive SES events. These ten seconds … |
| 1.3.6.1.4.1.2636.3.73.1.3.3.5.1.9 | ColumnjnxoptIfOTNPMCurrentDayBBEs | read-only | current | An errored block not occurring as part of an SES. |
| 1.3.6.1.4.1.2636.3.73.1.3.3.5.1.10 | ColumnjnxoptIfOTNPMCurrentDayESR | read-only | current | The ratio of ES in available time to total seconds in available time during a fixed measurement interval. |
| 1.3.6.1.4.1.2636.3.73.1.3.3.5.1.11 | ColumnjnxoptIfOTNPMCurrentDaySESR | read-only | current | The ratio of SES in available time to total seconds in available time during a fixed measurement interval. |
| 1.3.6.1.4.1.2636.3.73.1.3.3.5.1.12 | ColumnjnxoptIfOTNPMCurrentDayBBER | read-only | current | The ratio of BBE in available time to total seconds in available time during a fixed measurement interval. |
| 1.3.6.1.4.1.2636.3.73.1.3.3.5.1.13 | ColumnjnxoptIfOTNPMCurrentDayElapsedTime | read-only | current | Time elapsed for current day |
| 1.3.6.1.4.1.2636.3.73.1.3.3.5.1.14 | ColumnjnxoptIfOTNPMCurDaySuspectReason | read-only | current | If SuspectedFlag is true, the reson for the PM data being suspect. 0 - not applicable 1 - unknown 2 - new object 3 - interface disabled 4 - clock shift detecte… |
| 1.3.6.1.4.1.2636.3.73.1.3.3.6 | TablejnxoptIfOTNPMPrevDayTable | not-accessible | current | A Performance monitoring Previous Day Table. |
| 1.3.6.1.4.1.2636.3.73.1.3.3.6.1 | RowjnxoptIfOTNPMPrevDayEntry | not-accessible | current | A conceptual entry in the Near end or Far End performance monitoring previous day table for the type 'jnxoptIfOTNPMPrevDayLayer' layer. |
| 1.3.6.1.4.1.2636.3.73.1.3.3.6.1.1 | ColumnjnxoptIfOTNPMPrevDayType | not-accessible | current | This parameter indicates the parameters for the table are for the Near End or Far End performance data. 1 - Near End 2 - Far End |
| 1.3.6.1.4.1.2636.3.73.1.3.3.6.1.2 | ColumnjnxoptIfOTNPMPrevDayLayer | not-accessible | current | This parameter indicates the parameters for the table are for OTUk, ODUk, TCMn performance data. 1 - OTUk 2 - ODUk 3 - TCM The ODUk/TCM sublayer PM is not rela… |
| 1.3.6.1.4.1.2636.3.73.1.3.3.6.1.3 | ColumnjnxoptIfOTNPMPrevDayTCMLevel | not-accessible | current | This parameter indicates the TCM level (1-6) if the PM is of the type TCM. |
| 1.3.6.1.4.1.2636.3.73.1.3.3.6.1.4 | ColumnjnxoptIfOTNPMPrevDaySuspectedFlag | read-only | current | If true, the data in this entry may be unreliable. |
| 1.3.6.1.4.1.2636.3.73.1.3.3.6.1.5 | ColumnjnxoptIfOTNPMPrevDayBip8 | read-only | current | Number of pre FEC failures occurred in an observation period. |
| 1.3.6.1.4.1.2636.3.73.1.3.3.6.1.6 | ColumnjnxoptIfOTNPMPrevDayESs | read-only | current | The number of seconds which have an error. It is a one-second period in which one or more bits are in error or during which Loss of Signal (LOS) or Alarm Indic… |
| 1.3.6.1.4.1.2636.3.73.1.3.3.6.1.7 | ColumnjnxoptIfOTNPMPrevDaySESs | read-only | current | The number of seconds which have a severe error. A severely errored second, is a one-second period which has a bit-error ratio = 1x10Eminus3 or during which Lo… |
| 1.3.6.1.4.1.2636.3.73.1.3.3.6.1.8 | ColumnjnxoptIfOTNPMPrevDayUASs | read-only | current | It is the number of unavailable seconds in the previous day. A period of unavailable time begins at the onset of ten consecutive SES events. These ten seconds … |
| 1.3.6.1.4.1.2636.3.73.1.3.3.6.1.9 | ColumnjnxoptIfOTNPMPrevDayBBEs | read-only | current | An errored block not occurring as part of an SES. |
| 1.3.6.1.4.1.2636.3.73.1.3.3.6.1.10 | ColumnjnxoptIfOTNPMPrevDayESR | read-only | current | The ratio of ES in available time to total seconds in available time during a fixed measurement interval. |
| 1.3.6.1.4.1.2636.3.73.1.3.3.6.1.11 | ColumnjnxoptIfOTNPMPrevDaySESR | read-only | current | The ratio of SES in available time to total seconds in available time during a fixed measurement interval. |
| 1.3.6.1.4.1.2636.3.73.1.3.3.6.1.12 | ColumnjnxoptIfOTNPMPrevDayBBER | read-only | current | The ratio of BBE in available time to total seconds in available time during a fixed measurement interval. |
| 1.3.6.1.4.1.2636.3.73.1.3.3.6.1.13 | ColumnjnxoptIfOTNPMPrevDayTimeStamp | read-only | current | Time stamp of this interval. |
| 1.3.6.1.4.1.2636.3.73.1.3.3.6.1.14 | ColumnjnxoptIfOTNPMPrevDaySuspectReason | read-only | current | If SuspectedFlag is true, the reson for the PM data being suspect. 0 - not applicable 1 - unknown 2 - new object 3 - clock shift detected 4 - cleared by user 5… |
| 1.3.6.1.4.1.2636.3.73.1.3.3.7 | TablejnxoptIfOTNPMFECConfigTable | not-accessible | current | A table of performance monitoring FEC configuration. |
| 1.3.6.1.4.1.2636.3.73.1.3.3.7.1 | RowjnxoptIfOTNPMFECConfigEntry | not-accessible | current | A conceptual entry in the performance monitoring FEC configuration layer. |
| 1.3.6.1.4.1.2636.3.73.1.3.3.7.1.1 | ColumnjnxoptIfOTNPMFECConfigType | not-accessible | current | This parameter indicates the parameters for the table are for the Near End or Far End performance data. 1 - Near End 2 - Far End |
| 1.3.6.1.4.1.2636.3.73.1.3.3.7.1.2 | ColumnjnxoptIfOTNPMFECValidIntervals | read-only | current | The number of contiguous 15 minute intervals for which valid FEC PM data is available for the particular interface. |
| 1.3.6.1.4.1.2636.3.73.1.3.3.7.1.3 | ColumnjnxoptIfOTNPM15MinPreFECBERMantissaThreshold | read-write | current | BER (mantissa) by the interface within any given 15 minutes performance data collection period, which causes the SNMP agent to send jnxoptIf15MinThreshPreFECBE… |
| 1.3.6.1.4.1.2636.3.73.1.3.3.7.1.4 | ColumnjnxoptIfOTNPM15MinPreFECBERExponentThreshold | read-write | current | The Pre FEC BER (exponent) by the interface within any given 15 minutes performance data collection period, which causes the SNMP agent to send jnxoptIf15MinTh… |
| 1.3.6.1.4.1.2636.3.73.1.3.3.7.1.5 | ColumnjnxoptIfOTNPM24HourPreFECBERMantissaThreshold | read-write | current | BER (mantissa) by the interface within any given 24 Hour performance data collection period, which causes the SNMP agent to send jnxoptIf5s24Hour15MinThreshPre… |
| 1.3.6.1.4.1.2636.3.73.1.3.3.7.1.6 | ColumnjnxoptIfOTNPM24HourPreFECBERExponentThreshold | read-write | current | The Pre FEC BER (exponent) by the interface within any given 24 Hour performance data collection period, which causes the SNMP agent to send jnxoptIf5s24Hour15… |
| 1.3.6.1.4.1.2636.3.73.1.3.3.7.1.7 | ColumnjnxoptIfOTNPMFECBEREnableTCA | read-write | current | Enable TCA's - 15minute and 24hr for FEC BER |
| 1.3.6.1.4.1.2636.3.73.1.3.3.8 | TablejnxoptIfOTNPMFECCurrentTable | not-accessible | current | A Performance monitoring FEC Current Table. |
| 1.3.6.1.4.1.2636.3.73.1.3.3.8.1 | RowjnxoptIfOTNPMFECCurrentEntry | not-accessible | current | A conceptual entry in the Near end or Far End performance monitoring FEC current table. |
| 1.3.6.1.4.1.2636.3.73.1.3.3.8.1.1 | ColumnjnxoptIfOTNPMFECCurrentType | not-accessible | current | This parameter indicates the parameters for the table are for the Near End or Far End performance data. 1 - Near End 2 - Far End |
| 1.3.6.1.4.1.2636.3.73.1.3.3.8.1.2 | ColumnjnxoptIfOTNPMFECCurrentSuspectedFlag | read-only | current | If true, the data in this entry may be unreliable. |
| 1.3.6.1.4.1.2636.3.73.1.3.3.8.1.3 | ColumnjnxoptIfOTNPMCurrentFECCorrectedErr | read-only | current | The number of bits corrected by the FEC are counted in the interval. |
| 1.3.6.1.4.1.2636.3.73.1.3.3.8.1.4 | ColumnjnxoptIfOTNPMCurrentFECUncorrectedWords | read-only | current | The number of un-corrected words by the FEC are counted over the interval. |
| 1.3.6.1.4.1.2636.3.73.1.3.3.8.1.5 | ColumnjnxoptIfOTNPMCurrentFECBERMantissa | read-only | current | The number of Errored bits at receiving side before the FEC function counted over one second .. mantissa. |
| 1.3.6.1.4.1.2636.3.73.1.3.3.8.1.6 | ColumnjnxoptIfOTNPMCurrentFECBERExponent | read-only | current | The number of Errored bits at receiving side before the FEC function counted over one second .. exponent (eg -1). |
| 1.3.6.1.4.1.2636.3.73.1.3.3.8.1.7 | ColumnjnxoptIfOTNPMCurrentFECMinBERMantissa | read-only | current | The minimum number of Errored bits at receiving side before the FEC function counted over one second .. mantissa. |
| 1.3.6.1.4.1.2636.3.73.1.3.3.8.1.8 | ColumnjnxoptIfOTNPMCurrentFECMinBERExponent | read-only | current | The minimum number of Errored bits at receiving side before the FEC function counted over one second .. exponent (eg -1). |
| 1.3.6.1.4.1.2636.3.73.1.3.3.8.1.9 | ColumnjnxoptIfOTNPMCurrentFECMaxBERMantissa | read-only | current | The maximum number of Errored bits at receiving side before the FEC function counted over one second .. mantissa. |
| 1.3.6.1.4.1.2636.3.73.1.3.3.8.1.10 | ColumnjnxoptIfOTNPMCurrentFECMaxBERExponent | read-only | current | The maximum number of Errored bits at receiving side before the FEC function counted over one second .. exponent (eg -1). |
| 1.3.6.1.4.1.2636.3.73.1.3.3.8.1.11 | ColumnjnxoptIfOTNPMCurrentFECAvgBERMantissa | read-only | current | The average number of Errored bits at receiving side before the FEC function counted over one second .. mantissa. |
| 1.3.6.1.4.1.2636.3.73.1.3.3.8.1.12 | ColumnjnxoptIfOTNPMCurrentFECAvgBERExponent | read-only | current | The average number of Errored bits at receiving side before the FEC function counted over one second .. exponent (eg -1). |
| 1.3.6.1.4.1.2636.3.73.1.3.3.8.1.13 | ColumnjnxoptIfOTNPMCurrentFECElapsedTime | read-only | current | Time elapsed for this 15 minute interval. |
| 1.3.6.1.4.1.2636.3.73.1.3.3.8.1.14 | ColumnjnxoptIfOTNPMFECCurSuspectReason | read-only | current | If SuspectedFlag is true, the reson for the PM data being suspect. 0 - not applicable 1 - unknown 2 - new object 3 - interface disabled 4 - clock shift detecte… |
| 1.3.6.1.4.1.2636.3.73.1.3.3.9 | TablejnxoptIfOTNPMFECIntervalTable | not-accessible | current | A Performance monitoring FEC Interval Table. |
| 1.3.6.1.4.1.2636.3.73.1.3.3.9.1 | RowjnxoptIfOTNPMFECIntervalEntry | not-accessible | current | A conceptual entry in the Near end or Far End performance monitoring FEC interval table. |
| 1.3.6.1.4.1.2636.3.73.1.3.3.9.1.1 | ColumnjnxoptIfOTNPMFECIntervalType | not-accessible | current | This parameter indicates the parameters for the table are for the Near End or Far End performance data. 1 - Near End 2 - Far End |
| 1.3.6.1.4.1.2636.3.73.1.3.3.9.1.2 | ColumnjnxoptIfOTNPMFECIntervalNumber | not-accessible | current | A number between 1 and 96, where 1 is the most recently completed 15 minute interval and 96 is the 15 minutes interval completed 23 hours and 45 minutes prior … |
| 1.3.6.1.4.1.2636.3.73.1.3.3.9.1.3 | ColumnjnxoptIfOTNPMFECIntervalSuspectedFlag | read-only | current | If true, the data in this entry may be unreliable. |
| 1.3.6.1.4.1.2636.3.73.1.3.3.9.1.4 | ColumnjnxoptIfOTNPMIntervalFECCorrectedErr | read-only | current | The number of bits corrected by the FEC are counted in the interval. |
| 1.3.6.1.4.1.2636.3.73.1.3.3.9.1.5 | ColumnjnxoptIfOTNPMIntervalFECUncorrectedWords | read-only | current | The number of words un-corrected words by the FEC are counted over the interval. |
| 1.3.6.1.4.1.2636.3.73.1.3.3.9.1.6 | ColumnjnxoptIfOTNPMIntervalMinFECBERMantissa | read-only | current | The minimun bit error rate at receiving side before the FEC function counted over one second .. mantissa. This is the minimum Pre FEC BER in the current 24hour… |
| 1.3.6.1.4.1.2636.3.73.1.3.3.9.1.7 | ColumnjnxoptIfOTNPMIntervalMinFECBERExponent | read-only | current | The minimun bit error rate at receiving side before the FEC function counted over one second .. exponent. This is the minimum Pre FEC BER in the current 24hour… |
| 1.3.6.1.4.1.2636.3.73.1.3.3.9.1.8 | ColumnjnxoptIfOTNPMIntervalMaxFECBERMantissa | read-only | current | The maximun bit error rate at receiving side before the FEC function counted over one second .. mantissa. This is the maximum Pre FEC BER in the current 24hour… |
| 1.3.6.1.4.1.2636.3.73.1.3.3.9.1.9 | ColumnjnxoptIfOTNPMIntervalMaxFECBERExponent | read-only | current | The maximun bit error rate at receiving side before the FEC function counted over one second .. exponent. This is the maximum Pre FEC BER in the current 24hour… |
| 1.3.6.1.4.1.2636.3.73.1.3.3.9.1.10 | ColumnjnxoptIfOTNPMIntervalAvgFECBERMantissa | read-only | current | The average bit error rate at receiving side before the FEC function counted over one second .. mantissa. This is the average Pre FEC BER in the current 24hour… |
| 1.3.6.1.4.1.2636.3.73.1.3.3.9.1.11 | ColumnjnxoptIfOTNPMIntervalAvgFECBERExponent | read-only | current | The average bit error rate at receiving side before the FEC function counted over one second .. exponent. This is the average Pre FEC BER in the current 24hour… |
| 1.3.6.1.4.1.2636.3.73.1.3.3.9.1.12 | ColumnjnxoptIfOTNPMFECIntervalTimeStamp | read-only | current | Time stamp of this interval. |
| 1.3.6.1.4.1.2636.3.73.1.3.3.9.1.13 | ColumnjnxoptIfOTNPMFECIntSuspectReason | read-only | current | If SuspectedFlag is true, the reson for the PM data being suspect. 0 - not applicable 1 - unknown 2 - new object 3 - interface disabled 4 - clock shift detecte… |
| 1.3.6.1.4.1.2636.3.73.1.3.3.10 | TablejnxoptIfOTNPMFECCurrentDayTable | not-accessible | current | A Performance monitoring FEC current day table. |
| 1.3.6.1.4.1.2636.3.73.1.3.3.10.1 | RowjnxoptIfOTNPMFECCurrentDayEntry | not-accessible | current | A conceptual entry in the Near end or Far End performance monitoring FEC current day table. |
| 1.3.6.1.4.1.2636.3.73.1.3.3.10.1.1 | ColumnjnxoptIfOTNPMFECCurrentDayType | not-accessible | current | This parameter indicates the parameters for the table are for the Near End or Far End performance data. 1 - Near End 2 - Far End |
| 1.3.6.1.4.1.2636.3.73.1.3.3.10.1.2 | ColumnjnxoptIfOTNPMFECCurrentDaySuspectedFlag | read-only | current | If true, the data in this entry may be unreliable. |
| 1.3.6.1.4.1.2636.3.73.1.3.3.10.1.3 | ColumnjnxoptIfOTNPMCurrentDayFECCorrectedErr | read-only | current | The number of bits corrected by the FEC are counted in the interval. |
| 1.3.6.1.4.1.2636.3.73.1.3.3.10.1.4 | ColumnjnxoptIfOTNPMCurrentDayFECUncorrectedWords | read-only | current | The number of words un-corrected by the FEC are counted over the Day. |
| 1.3.6.1.4.1.2636.3.73.1.3.3.10.1.5 | ColumnjnxoptIfOTNPMCurrentDayMinFECBERMantissa | read-only | current | The minimun bit error rate at receiving side before the FEC function counted over one second .. mantissa. This is the minimum PreFEC BER in the current 24hour … |
| 1.3.6.1.4.1.2636.3.73.1.3.3.10.1.6 | ColumnjnxoptIfOTNPMCurrentDayMinFECBERExponent | read-only | current | The minimun bit error rate at receiving side before the FEC function counted over one second .. exponent. This is the minimum PreFEC BER in the current 24hour … |
| 1.3.6.1.4.1.2636.3.73.1.3.3.10.1.7 | ColumnjnxoptIfOTNPMCurrentDayMaxFECBERMantissa | read-only | current | The maximun bit error rate at receiving side before the FEC function counted over one second .. mantissa. This is the maximum PreFEC BER in the current 24hour … |
| 1.3.6.1.4.1.2636.3.73.1.3.3.10.1.8 | ColumnjnxoptIfOTNPMCurrentDayMaxFECBERExponent | read-only | current | The maximun bit error rate at receiving side before the FEC function counted over one second .. exponent. This is the maximum PreFEC BER in the current 24hour … |
| 1.3.6.1.4.1.2636.3.73.1.3.3.10.1.9 | ColumnjnxoptIfOTNPMCurrentDayAvgFECBERMantissa | read-only | current | The average bit error rate at receiving side before the FEC function counted over one second .. mantissa. This is the average PreFEC BER in the current 24hour … |
| 1.3.6.1.4.1.2636.3.73.1.3.3.10.1.10 | ColumnjnxoptIfOTNPMCurrentDayAvgFECBERExponent | read-only | current | The average bit error rate at receiving side before the FEC function counted over one second .. exponent. This is the average PreFEC BER in the current 24hour … |
| 1.3.6.1.4.1.2636.3.73.1.3.3.10.1.11 | ColumnjnxoptIfOTNPMFECCurrentDayElapsedTime | read-only | current | Time elapsed for current day. |
| 1.3.6.1.4.1.2636.3.73.1.3.3.10.1.12 | ColumnjnxoptIfOTNPMFECCurDaySuspectReason | read-only | current | If SuspectedFlag is true, the reson for the PM data being suspect. 0 - not applicable 1 - unknown 2 - new object 3 - clock shift detected 4 - cleared by user 5… |
| 1.3.6.1.4.1.2636.3.73.1.3.3.11 | TablejnxoptIfOTNPMFECPrevDayTable | not-accessible | current | A Performance monitoring FEC previous day table. |
| 1.3.6.1.4.1.2636.3.73.1.3.3.11.1 | RowjnxoptIfOTNPMFECPrevDayEntry | not-accessible | current | A conceptual entry in the Near end or Far End performance monitoring FEC previous day table. |
| 1.3.6.1.4.1.2636.3.73.1.3.3.11.1.1 | ColumnjnxoptIfOTNPMFECPrevDayType | not-accessible | current | This parameter indicates the parameters for the table are for the Near End or Far End performance data. 1 - Near End 2 - Far End |
| 1.3.6.1.4.1.2636.3.73.1.3.3.11.1.2 | ColumnjnxoptIfOTNPMFECPrevDaySuspectedFlag | read-only | current | If true, the data in this entry may be unreliable. |
| 1.3.6.1.4.1.2636.3.73.1.3.3.11.1.3 | ColumnjnxoptIfOTNPMPrevDayFECCorrectedErr | read-only | current | The number of bits corrected by the FEC are counted in the previous day. |
| 1.3.6.1.4.1.2636.3.73.1.3.3.11.1.4 | ColumnjnxoptIfOTNPMPrevDayFECUncorrectedWords | read-only | current | The number of un-corrected words by the FEC are counted over the previous Day. |
| 1.3.6.1.4.1.2636.3.73.1.3.3.11.1.5 | ColumnjnxoptIfOTNPMPrevDayMinFECBERMantissa | read-only | current | The maximun bit error rate at receiving side before the FEC function counted over one second .. mantissa. This is the maximum Pre FEC BER in the previous 24hou… |
| 1.3.6.1.4.1.2636.3.73.1.3.3.11.1.6 | ColumnjnxoptIfOTNPMPrevDayMinFECBERExponent | read-only | current | The minimun bit error rate at receiving side before the FEC function counted over one second .. exponent. This is the maximum Pre FEC BER in the previous 24hou… |
| 1.3.6.1.4.1.2636.3.73.1.3.3.11.1.7 | ColumnjnxoptIfOTNPMPrevDayMaxFECBERMantissa | read-only | current | The maximun bit error rate at receiving side before the FEC function counted over one second .. mantissa. This is the maximum Pre FEC BER in the previous 24hou… |
| 1.3.6.1.4.1.2636.3.73.1.3.3.11.1.8 | ColumnjnxoptIfOTNPMPrevDayMaxFECBERExponent | read-only | current | The maximun bit error rate at receiving side before the FEC function counted over one second .. exponent (eg -3). This is the maximum Pre FEC BER in the previo… |
| 1.3.6.1.4.1.2636.3.73.1.3.3.11.1.9 | ColumnjnxoptIfOTNPMPrevDayAvgFECBERMantissa | read-only | current | The average bit error rate at receiving side before the FEC function counted over one second .. mantissa. This is the average Pre FEC BER during the previous 2… |
| 1.3.6.1.4.1.2636.3.73.1.3.3.11.1.10 | ColumnjnxoptIfOTNPMPrevDayAvgFECBERExponent | read-only | current | The average bit error rate at receiving side before the FEC function counted over one second .. exponent (eg -3). This is the average Pre FEC BER during the pr… |
| 1.3.6.1.4.1.2636.3.73.1.3.3.11.1.11 | ColumnjnxoptIfOTNPMFECPrevDayTimeStamp | read-only | current | Time stamp for the Prev day. |
| 1.3.6.1.4.1.2636.3.73.1.3.3.11.1.12 | ColumnjnxoptIfOTNPMFECPrevDaySuspectReason | read-only | current | If SuspectedFlag is true, the reson for the PM data being suspect. 0 - not applicable 1 - unknown 2 - new object 3 - clock shift detected 4 - cleared by user 5… |
| 1.3.6.1.4.1.2636.3.73.1.3.4 | NodejnxoptIfOTNAlarm | |||
| 1.3.6.1.4.1.2636.3.73.1.3.4.1 | TablejnxoptIfOTNAlarmTable | not-accessible | current | A table of alarm entries. |
| 1.3.6.1.4.1.2636.3.73.1.3.4.1.1 | RowjnxoptIfOTNAlarmEntry | not-accessible | current | A conceptual entry in the alarm table. |
| 1.3.6.1.4.1.2636.3.73.1.3.4.1.1.1 | ColumnjnxoptIfOTNAlarmLocation | accessible-for-notify | current | The object identifies indicates if this entry was for Near end/Far end. |
| 1.3.6.1.4.1.2636.3.73.1.3.4.1.1.2 | ColumnjnxoptIfOTNAlarmDirection | accessible-for-notify | current | The object identifies indicates if this entry was for for the Tx/Rx or both. |
| 1.3.6.1.4.1.2636.3.73.1.3.4.1.1.3 | ColumnjnxoptIfOTNAlarmLayer | accessible-for-notify | current | This specifies which sublayer this alarm is for. |
| 1.3.6.1.4.1.2636.3.73.1.3.4.1.1.4 | ColumnjnxoptIfOTNAlarmTCMLevel | accessible-for-notify | current | TCM level 1-6 of the alarm. It will be 0 if alarm sublayer is OCh, OTUk or ODUk. |
| 1.3.6.1.4.1.2636.3.73.1.3.4.1.1.5 | ColumnjnxoptIfOTNOChOTUkAlarmType | accessible-for-notify | current | This specifies the type of alarm of the sublayer 'jnxoptIfOTNAlarmLayer' for OCh/OTUk . |
| 1.3.6.1.4.1.2636.3.73.1.3.4.1.1.6 | ColumnjnxoptIfOTNAlarmSeverity | accessible-for-notify | current | The object identifies the severity of the last alarm/alert that most recently was set or cleared. |
| 1.3.6.1.4.1.2636.3.73.1.3.4.1.1.7 | ColumnjnxoptIfOTNAlarmDate | accessible-for-notify | current | This specifies the date and time when this alarm occurred. |
| 1.3.6.1.4.1.2636.3.73.1.3.4.1.1.8 | ColumnjnxoptIfOTNODUkTcmAlarmType | accessible-for-notify | current | This specifies the type of alarm of the sublayer 'jnxoptIfOTNAlarmLayer' for ODUk/TCM . |
Type Definitions
| Name | Syntax | Status | Description |
|---|---|---|---|
| JnxoptIfBitRateLineCoding | INTEGER { rate2point5G(1), rate10G(2), rate40G(3), rate100G(4), rate400G(5) } | current | Optical tributary signal class 1 - NRZ 2.5G (from nominally 622 Mbit/s to nominally 2.67 Gbit/s) 2 - NRZ 10G nominally 2.4 Gbit/s to nominally 10.71 Gbit/s. 3 - 40 Gbits/s 4 - 100 Gbits/s 5 - 400 Gbits/s 40 Gbits/s and … |
| JnxoptIfChannelSpacing | INTEGER { spacing100Ghz(1), spacing50Ghz(2), spacing25Ghz(3), spacing12point5Ghz(4), spacing6point5Ghz(5) } | current | Channel spacing 1 - 100 GHz 2 - 50 GHz 3 - 25 GHz 4 - 12.5 GHz 5 - 6.25 GHz |
| JnxoptIfFiberTypeCategory | INTEGER { categoryA(1), categoryB(2), categoryC(3), categoryD(4), categoryE(5) } | current | Fiber Types - ITU-T Recs G.652, G.653, G.654 and G.655 G.652 A, B, C, D G.653 A, B G.654 A, B, C G.655 C, D, E G.656 G.657 A, B Categories - A, B, C, D and E |
| JnxoptIfFiberTypeRecommendation | INTEGER { g652(1), g653(2), g654(3), g655(4), g656(5), g657(6) } | current | Fiber Types - ITU-T Recs G.652, G.653, G.654 and G.655 One for recommendation and one for category. G.652 A, B, C, D G.653 A, B G.654 A, B, C G.655 C, D, E G.656 G.657 A, B |
| JnxoptIfOTNAlarmSeverity | INTEGER { jnxCritical(1), jnxMajor(2), jnxMinor(3), jnxInfo(4) } | current | Severity of the Notification |
| JnxoptIfOTNDirection | INTEGER { jnxTxDir(1), jnxRxDir(2), jnxBiDir(3) } | current | Indicates the direction as Rx/Tx or bi-directional. |
| JnxoptIfOTNLayer | INTEGER { jnxoptIfOTUkLayer(1), jnxoptIfODUkLayer(2), jnxoptIfTCMSubLayer(3) } | current | This parameter indicates the parameters for the table are for OTUk, ODUk, TCM performance data. 1 - OTUk 2 - ODUk 3 - TCM The ODUk layer and TCM sublayer PM is not related to the black link PM management, but since this… |
| JnxoptIfOTNOChAlarms | INTEGER { jnxoptIfOtnNoAlarm(0), jnxoptIfOtnLosAlarm(1), jnxoptIfOtnLofAlarm(2), jnxoptIfOtnLomAlarm(3), jnxoptIfOtuSsfAlarm(4), jnxoptIfOtuBdiAlarm(5), jnxoptIfOtuTimAlarm(6), jnxoptIfOtuIaeAlarm(7), jnxoptIfOtuBiaeAlarm(8), jnxoptIfOtuTsfAlarm(9), jnxoptIfOtuDegAlarm(10), jnxoptIfOtuFecExcessiveErrsAlarm(11), jnxoptIf15MinThreshBBETCA(12), jnxoptIf15MinThreshESTCA(13), jnxoptIf15MinThreshSESTCA(14), jnxoptIf15MinThreshUASTCA(15), jnxoptIf15MinThreshBip8TCA(16), jnxoptIf15MinThUnCorrectedWordsTCA(17), jnxoptIf15MinThreshPreFECBERTCA(18), jnxoptIf24HourThreshBBETCA(19), jnxoptIf24HourThreshESTCA(20), jnxoptIf24HourThreshSESTCA(21), jnxoptIf24HourThreshUASTCA(22), jnxoptIf24HourThreshBip8TCA(23), jnxoptIf24HourThreshPreFECBERTCA(24), jnxoptIfOtuAisAlarm(25) } | current | This is the possible alarms from the OCh and OTUk layer. |
| JnxoptIfOTNODUkTcmAlarms | INTEGER { jnxoptIfOtnOdukTcmNoAlarm(0), jnxoptIfOdukTcmOciAlarm(1), jnxoptIfOdukTcmLckAlarm(2), jnxoptIfOdukTcmBdiAlarm(3), jnxoptIfOdukTcmTimAlarm(4), jnxoptIfOdukTcmDegAlarm(5), jnxoptIfOdukTcmIaeAlarm(6), jnxoptIfOdukTcmLTCAlarm(7), jnxoptIfOdukTcmCSfAlarm(8), jnxoptIfOdukTcmSSfAlarm(9), jnxoptIfOdukTcmTSfAlarm(10), jnxoptIfOdukTcm15MinThreshBBETCA(11), jnxoptIfOdukTcm15MinThreshESTCA(12), jnxoptIfOdukTcm15MinThreshSESTCA(13), jnxoptIfOdukTcm15MinThreshUASTCA(14), jnxoptIfOdukTcm15MinThreshBip8TCA(15), jnxoptIfOdukTcmAisAlarm(16), jnxoptIfOdukPtmAlarm(17), jnxoptIfOdukTcm24HourThreshBBETCA(18), jnxoptIfOdukTcm24HourThreshESTCA(19), jnxoptIfOdukTcm24HourThreshSESTCA(20), jnxoptIfOdukTcm24HourThreshUASTCA(21), jnxoptIfOdukTcm24HourThreshBip8TCA(22) } | current | This is the alarms from the ODUk and TCM layer. |
| JnxoptIfOTNType | INTEGER { nearEnd(1), farEnd(2) } | current | This parameter indicates the parameters for the table are for the Near End or Far End performance data. 1 - Near End 2 - Far End |