Juniper-DS3-MIB
56 objects
The DS3 MIB for the Juniper Networks enterprise. This MIB contains managed objects for DS3/E3 interfaces. Management objects are provided to supplement those found in the standard DS3-MIB (RFC 2496).
Imported Objects
| DS3-MIB | dsx3FarEndConfigEntry dsx3FarEndCurrentEntry dsx3FarEndIntervalEntry dsx3FarEndTotalEntry |
| IF-MIB | ifIndex InterfaceIndexOrZero |
| Juniper-MIBs | juniMibs |
| Juniper-TC | JuniNextIfIndex |
| PerfHist-TC-MIB | PerfCurrentCount PerfIntervalCount PerfTotalCount |
| SNMPv2-CONF | MODULE-COMPLIANCE OBJECT-GROUP |
| SNMPv2-SMI | Integer32 MODULE-IDENTITY OBJECT-TYPE |
| SNMPv2-TC | DisplayString RowStatus TruthValue |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.4874.2.2.4 | IdentityjuniDs3MIB | The DS3 MIB for the Juniper Networks enterprise. This MIB contains managed objects for DS3/E3 interfaces. Management objects are provided to supplement those f… | ||
| 1.3.6.1.4.1.4874.2.2.4.1 | NodejuniDs3Objects | |||
| 1.3.6.1.4.1.4874.2.2.4.1.1 | TablejuniDsx3ConfigTable | not-accessible | current | This table contains entries for DS3/E3 interfaces present in the system. |
| 1.3.6.1.4.1.4874.2.2.4.1.1.1 | RowjuniDsx3ConfigEntry | not-accessible | current | Each entry describes the characteristics of an DS3/E3 interface. |
| 1.3.6.1.4.1.4874.2.2.4.1.1.1.1 | ColumnjuniDsx3LineLength | read-create | current | The length of the DS3/E3 line in meters. This objects provides information for line build out circuitry. This object is only useful if the interface has config… |
| 1.3.6.1.4.1.4874.2.2.4.1.1.1.2 | ColumnjuniDsx3LineType | read-create | current | This variable indicates the variety of DS3 C-bit or E3 application implementing this interface. The type of interface affects the interpretation of the usage a… |
| 1.3.6.1.4.1.4874.2.2.4.1.1.1.3 | ColumnjuniDsx3CellScramblerConfig | read-create | current | This variable indicates the state of the ATM cell scrambler for interfaces which support ATM over DS3 or E3. For interfaces which do not support ATM, this obje… |
| 1.3.6.1.4.1.4874.2.2.4.1.1.1.4 | ColumnjuniDsx3Channelization | read-create | current | The channelization setting for this DS3 interface; true(1) indicates channelization, false(2) indicates no channelization. |
| 1.3.6.1.4.1.4874.2.2.4.1.1.1.5 | ColumnjuniDsx3InterfaceType | read-create | current | The DS3 interface type setting. |
| 1.3.6.1.4.1.4874.2.2.4.1.1.1.6 | ColumnjuniDsx3Application | read-create | current | The interface application setting. |
| 1.3.6.1.4.1.4874.2.2.4.1.1.1.7 | ColumnjuniDsx3Ds3Channel | read-create | current | The DS3 channel setting. The range of channel settings depends on the line rate of the underlying interface. |
| 1.3.6.1.4.1.4874.2.2.4.1.1.1.8 | ColumnjuniDsx3LowerIfIndex | read-create | current | The ifIndex of the interface over which this DS3 interface is to be layered. A value of zero indicates no layering. An implementation may choose to require tha… |
| 1.3.6.1.4.1.4874.2.2.4.1.1.1.9 | ColumnjuniDsx3RowStatus | read-create | current | Controls creation/deletion of entries in this table according to the RowStatus textual convention, constrained to support setting the following values only: cr… |
| 1.3.6.1.4.1.4874.2.2.4.1.1.1.10 | ColumnjuniDsx3Ds3DsuMode | read-create | current | The DSU configuration setting for this entry. |
| 1.3.6.1.4.1.4874.2.2.4.1.1.1.11 | ColumnjuniDsx3Ds3BandwidthLimit | read-create | current | The DSU bandwidth configuration for this entry. |
| 1.3.6.1.4.1.4874.2.2.4.1.1.1.12 | ColumnjuniDsx3Ds3DsuScrambleMode | read-create | current | The DSU scramble mode setting for this entry. |
| 1.3.6.1.4.1.4874.2.2.4.1.1.1.13 | ColumnjuniDsx3MdlCarrier | read-create | current | Specifies the interface is used in carrier environment. |
| 1.3.6.1.4.1.4874.2.2.4.1.1.1.14 | ColumnjuniDsx3MdlTransmit | read-create | current | Specifies transmission enabling. |
| 1.3.6.1.4.1.4874.2.2.4.1.1.1.15 | ColumnjuniDsx3MdlEic | read-create | current | This is the equipment identification code. |
| 1.3.6.1.4.1.4874.2.2.4.1.1.1.16 | ColumnjuniDsx3MdlLic | read-create | current | This is the location identification code. |
| 1.3.6.1.4.1.4874.2.2.4.1.1.1.17 | ColumnjuniDsx3MdlFic | read-create | current | This is the frame identification code. |
| 1.3.6.1.4.1.4874.2.2.4.1.1.1.18 | ColumnjuniDsx3MdlUnit | read-create | current | This is the unit identification code. |
| 1.3.6.1.4.1.4874.2.2.4.1.1.1.19 | ColumnjuniDsx3MdlPfi | read-create | current | This is the facility identification code to send in the MDL path message. |
| 1.3.6.1.4.1.4874.2.2.4.1.1.1.20 | ColumnjuniDsx3MdlPort | read-create | current | This is the equipment port number to send in the MDL idle signal message. |
| 1.3.6.1.4.1.4874.2.2.4.1.1.1.21 | ColumnjuniDsx3MdlGenerator | read-create | current | This is the generator number to send in the MDL test signal message. |
| 1.3.6.1.4.1.4874.2.2.4.1.2 | ScalarjuniDs3NextIfIndex | read-only | current | Coordinate ifIndex value allocation for entries in juniDsx3ConfigTable. A GET of this object returns the next available ifIndex value to be used to create an e… |
| 1.3.6.1.4.1.4874.2.2.4.1.3 | TablejuniDsx3FarEndCurrentTable | not-accessible | current | This table contains entries for DS3/E3 interfaces present in the system. |
| 1.3.6.1.4.1.4874.2.2.4.1.3.1 | RowjuniDsx3FarEndCurrentEntry | not-accessible | current | Each entry describes the characteristics of an DS3/E3 interface. |
| 1.3.6.1.4.1.4874.2.2.4.1.3.1.1 | ColumnjuniDsx3FarEndCurrentInvalidSeconds | read-only | current | The counter associated with the number of Invalid Seconds encountered by a DS3/E3 interface in the current 15 minute interval. |
| 1.3.6.1.4.1.4874.2.2.4.1.4 | TablejuniDsx3FarEndIntervalTable | not-accessible | current | This table contains entries for DS3/E3 interfaces present in the system. |
| 1.3.6.1.4.1.4874.2.2.4.1.4.1 | RowjuniDsx3FarEndIntervalEntry | not-accessible | current | Each entry describes the characteristics of an DS3/E3 interface. |
| 1.3.6.1.4.1.4874.2.2.4.1.4.1.1 | ColumnjuniDsx3FarEndIntervalInvalidSeconds | read-only | current | The counter associated with the number of Invalid Seconds encountered by a DS3/E3 interface in one of the previous 96 individual 15 minute intervals. |
| 1.3.6.1.4.1.4874.2.2.4.1.5 | TablejuniDsx3FarEndTotalTable | not-accessible | current | This table contains entries for DS3/E3 interfaces present in the system. |
| 1.3.6.1.4.1.4874.2.2.4.1.5.1 | RowjuniDsx3FarEndTotalEntry | not-accessible | current | Each entry describes the characteristics of an DS3/E3 interface. |
| 1.3.6.1.4.1.4874.2.2.4.1.5.1.1 | ColumnjuniDsx3FarEndTotalInvalidSeconds | read-only | current | The counter associated with the number of Invalid Seconds encountered by a DS3/E3 interface in the previous 24 hour interval. |
| 1.3.6.1.4.1.4874.2.2.4.1.6 | TablejuniDsx3FarEndConfigTable | not-accessible | current | This table contains entries for DS3/E3 interfaces present in the system. |
| 1.3.6.1.4.1.4874.2.2.4.1.6.1 | RowjuniDsx3FarEndConfigEntry | not-accessible | current | Each entry describes the far end configuration characteristics of an DS3/E3 interface. |
| 1.3.6.1.4.1.4874.2.2.4.1.6.1.1 | ColumnjuniDsx3FarEndPortNumber | read-write | current | This code identifies the port number of the Far End DS3. It is sent within the Idle Signal Message. |
| 1.3.6.1.4.1.4874.2.2.4.1.6.1.2 | ColumnjuniDsx3FarEndGeneratorNumber | read-write | current | This code identifies the Far End DS3 Generator Number. It is sent within the Test Signal Message. |
| 1.3.6.1.4.1.4874.2.2.4.1.6.1.3 | ColumnjuniDsx3FarEndCarrier | read-write | current | Specifies the interface is used in carrier environment. It is sent with MDL messages. |
| 1.3.6.1.4.1.4874.2.2.4.4 | NodejuniDs3Conformance | |||
| 1.3.6.1.4.1.4874.2.2.4.4.1 | NodejuniDs3Compliances | |||
| 1.3.6.1.4.1.4874.2.2.4.4.1.1 | CompliancejuniDs3Compliance | obsolete | Obsolete compliance statement for entities which implement the Juniper DS3/E3 MIB. This statement became obsolete when support was added for line type and cell… | |
| 1.3.6.1.4.1.4874.2.2.4.4.1.2 | CompliancejuniDs3Compliance2 | obsolete | Obsolete compliance statement for entities which implement the Juniper DS3/E3 MIB. This statement became obsolete when support was added for DSU objects. | |
| 1.3.6.1.4.1.4874.2.2.4.4.1.3 | CompliancejuniDs3Compliance3 | obsolete | Obsolete compliance statement for entities which implement the Juniper DS3/E3 MIB. This statement became obsolete when support was added for dynamic DS3 interf… | |
| 1.3.6.1.4.1.4874.2.2.4.4.1.4 | CompliancejuniDs3Compliance4 | obsolete | Obsolete compliance statement for entities which implement the Juniper DS3/E3 MIB. This statement became obsolete when far end invalid seconds objects and more… | |
| 1.3.6.1.4.1.4874.2.2.4.4.1.5 | CompliancejuniDs3Compliance5 | obsolete | Obsolete compliance statement for entities which implement the Juniper DS3/E3 MIB. This statement became obsolete when support was added for far end generator … | |
| 1.3.6.1.4.1.4874.2.2.4.4.1.6 | CompliancejuniDs3Compliance6 | current | The compliance statement for entities which implement the Juniper DS3/E3 MIB. | |
| 1.3.6.1.4.1.4874.2.2.4.4.2 | NodejuniDs3Groups | |||
| 1.3.6.1.4.1.4874.2.2.4.4.2.1 | GroupjuniDs3Group | obsolete | Obsolete collection of objects providing management of DS3/E3 interfaces in a Juniper product. This group became obsolete when support was added for line type … | |
| 1.3.6.1.4.1.4874.2.2.4.4.2.2 | GroupjuniDs3Group2 | obsolete | Obsolete collection of objects providing management of DS3/E3 interfaces in a Juniper product. This group became obsolete when support was added for DSU config… | |
| 1.3.6.1.4.1.4874.2.2.4.4.2.3 | GroupjuniDs3Group3 | obsolete | Obsolete collection of objects providing management of DS3/E3 interfaces in a Juniper product. This group became obsolete when support was added for dynamic DS… | |
| 1.3.6.1.4.1.4874.2.2.4.4.2.4 | GroupjuniDs3Group4 | obsolete | Obsolete collection of objects providing management of DS3/E3 interfaces in a Juniper product. This group became obsolete when more configuration objects were … | |
| 1.3.6.1.4.1.4874.2.2.4.4.2.5 | GroupjuniDs3Group5 | current | A collection of objects providing management of DS3/E3 interfaces in a Juniper product. | |
| 1.3.6.1.4.1.4874.2.2.4.4.2.6 | GroupjuniDs3FarEndGroup | obsolete | Obsolete collection of objects providing remote statistics information applicable to DS3 interfaces in a Juniper product. This group became obsolete when remot… | |
| 1.3.6.1.4.1.4874.2.2.4.4.2.7 | GroupjuniDs3FarEndGroup2 | current | A collection of objects providing remote statistics information applicable to DS3 interfaces in a Juniper product. |