Juniper-OSPF-MIB
112 objects
The OSPF Protocol MIB for the Juniper Networks enterprise.
Imported Objects
| IF-MIB | InterfaceIndexOrZero |
| Juniper-MIBs | juniMibs |
| OSPF-MIB | ospfAddressLessIf ospfAreaEntry ospfIfEntry ospfIfIpAddress ospfNbrEntry ospfVirtIfEntry |
| SNMPv2-CONF | MODULE-COMPLIANCE OBJECT-GROUP |
| SNMPv2-SMI | Counter32 Integer32 IpAddress MODULE-IDENTITY OBJECT-TYPE Unsigned32 |
| SNMPv2-TC | RowStatus TruthValue |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.4874.2.2.14 | IdentityjuniOspfMIB | The OSPF Protocol MIB for the Juniper Networks enterprise. | ||
| 1.3.6.1.4.1.4874.2.2.14.1 | NodejuniOspfObjects | |||
| 1.3.6.1.4.1.4874.2.2.14.1.1 | NodejuniOspfGeneralGroup | |||
| 1.3.6.1.4.1.4874.2.2.14.1.1.1 | ScalarjuniOspfProcessId | read-write | current | An identifier having special semantics when set. When this object's value is zero, OSPF is disabled and cannot be configured. Setting this object to a nonzero … |
| 1.3.6.1.4.1.4874.2.2.14.1.1.2 | ScalarjuniOspfMaxPathSplits | read-write | current | The maximum number of equal-cost routes that will be maintained by the OSPF protocol. A change in this value will be taken into account at the next shortest-pa… |
| 1.3.6.1.4.1.4874.2.2.14.1.1.3 | ScalarjuniOspfSpfHoldInterval | read-write | current | The minimum amount of time that must elapse between shortest-path-first recalculations. Reducing this value can cause an immediate SPF recalulation if the new … |
| 1.3.6.1.4.1.4874.2.2.14.1.1.4 | ScalarjuniOspfNumActiveAreas | read-only | current | The number of active areas. |
| 1.3.6.1.4.1.4874.2.2.14.1.1.5 | ScalarjuniOspfSpfTime | read-only | current | The SPF schedule delay. |
| 1.3.6.1.4.1.4874.2.2.14.1.1.6 | ScalarjuniOspfRefBw | read-write | current | The reference bandwith, in bits per second. This object is used when OSPF automatic interface cost calculation is used. |
| 1.3.6.1.4.1.4874.2.2.14.1.1.7 | ScalarjuniOspfAutoVlink | read-write | current | Set this object to true(1) in order to have virtual links automatically configured. |
| 1.3.6.1.4.1.4874.2.2.14.1.1.8 | ScalarjuniOspfIntraDistance | read-write | current | Default distance for intra-area routes. |
| 1.3.6.1.4.1.4874.2.2.14.1.1.9 | ScalarjuniOspfInterDistance | read-write | current | Default distance for inter-area routes. |
| 1.3.6.1.4.1.4874.2.2.14.1.1.10 | ScalarjuniOspfExtDistance | read-write | current | Default distance for external type 5 and type 7 routes. |
| 1.3.6.1.4.1.4874.2.2.14.1.1.11 | ScalarjuniOspfHelloPktsRcv | read-only | current | Number of hello packets received. |
| 1.3.6.1.4.1.4874.2.2.14.1.1.12 | ScalarjuniOspfDDPktsRcv | read-only | current | Number of database description packets received. |
| 1.3.6.1.4.1.4874.2.2.14.1.1.13 | ScalarjuniOspfLsrPktsRcv | read-only | current | Number of link state request packets received. |
| 1.3.6.1.4.1.4874.2.2.14.1.1.14 | ScalarjuniOspfLsuPktsRcv | read-only | current | Number of link state update packets received. |
| 1.3.6.1.4.1.4874.2.2.14.1.1.15 | ScalarjuniOspfLsAckPktsRcv | read-only | current | Number of link state ACK packets received. |
| 1.3.6.1.4.1.4874.2.2.14.1.1.16 | ScalarjuniOspfTotalRcv | read-only | current | Number of OSPF packets received. |
| 1.3.6.1.4.1.4874.2.2.14.1.1.17 | ScalarjuniOspfLsaDiscardCnt | read-only | current | Number of LSA packets discarded. |
| 1.3.6.1.4.1.4874.2.2.14.1.1.18 | ScalarjuniOspfHelloPktsSent | read-only | current | Number of hello packets sent. |
| 1.3.6.1.4.1.4874.2.2.14.1.1.19 | ScalarjuniOspfDDPktsSent | read-only | current | Number of database description packets sent. |
| 1.3.6.1.4.1.4874.2.2.14.1.1.20 | ScalarjuniOspfLsrPktsSent | read-only | current | Number of link state request packets sent. |
| 1.3.6.1.4.1.4874.2.2.14.1.1.21 | ScalarjuniOspfLsuPktsSent | read-only | current | Number of link state update packets sent. |
| 1.3.6.1.4.1.4874.2.2.14.1.1.22 | ScalarjuniOspfLsAckPktsSent | read-only | current | Number of link state ACK packets sent. |
| 1.3.6.1.4.1.4874.2.2.14.1.1.23 | ScalarjuniOspfErrPktsSent | read-only | current | Number of packets dropped. |
| 1.3.6.1.4.1.4874.2.2.14.1.1.24 | ScalarjuniOspfTotalSent | read-only | current | Number of OSPF packets sent. |
| 1.3.6.1.4.1.4874.2.2.14.1.1.25 | ScalarjuniOspfCsumErrPkts | read-only | current | Number of packets received with a checksum error. |
| 1.3.6.1.4.1.4874.2.2.14.1.1.26 | ScalarjuniOspfAllocFailNbr | read-only | current | Number of neighbor allocation failures. |
| 1.3.6.1.4.1.4874.2.2.14.1.1.27 | ScalarjuniOspfAllocFailLsa | read-only | current | Number of LSA allocation failures. |
| 1.3.6.1.4.1.4874.2.2.14.1.1.28 | ScalarjuniOspfAllocFailLsd | read-only | current | Number of LSA HDR allocation failures. |
| 1.3.6.1.4.1.4874.2.2.14.1.1.29 | ScalarjuniOspfAllocFailDbRequest | read-only | current | Number of database request allocation failures. |
| 1.3.6.1.4.1.4874.2.2.14.1.1.30 | ScalarjuniOspfAllocFailRtx | read-only | current | Number of RTX allocation failures. |
| 1.3.6.1.4.1.4874.2.2.14.1.1.31 | ScalarjuniOspfAllocFailAck | read-only | current | Number of LS ACK allocation failures. |
| 1.3.6.1.4.1.4874.2.2.14.1.1.32 | ScalarjuniOspfAllocFailDbPkt | read-only | current | Number of DD packet allocation failures. |
| 1.3.6.1.4.1.4874.2.2.14.1.1.33 | ScalarjuniOspfAllocFailCirc | read-only | current | Number of OSPF interface allocation failures. |
| 1.3.6.1.4.1.4874.2.2.14.1.1.34 | ScalarjuniOspfAllocFailPkt | read-only | current | Number of OSPF general packet allocation failures. |
| 1.3.6.1.4.1.4874.2.2.14.1.1.35 | ScalarjuniOspfOperState | read-only | current | A flag to note whether this router is operational. |
| 1.3.6.1.4.1.4874.2.2.14.1.1.36 | ScalarjuniOspfVpnRouteTag | read-write | current | VPN route tag value. |
| 1.3.6.1.4.1.4874.2.2.14.1.1.37 | ScalarjuniOspfDomainId | read-write | current | OSPF domain ID. |
| 1.3.6.1.4.1.4874.2.2.14.1.1.38 | ScalarjuniOspfMplsTeRtrIdIfIndex | read-write | current | Configure the stable router interface id to designate it as TE capable. |
| 1.3.6.1.4.1.4874.2.2.14.1.2 | TablejuniOspfAreaTable | not-accessible | current | The Juniper OSPF area table describes the OSPF-specific characteristics of areas. |
| 1.3.6.1.4.1.4874.2.2.14.1.2.1 | RowjuniOspfAreaEntry | not-accessible | current | The OSPF area entry describes OSPF-specific characteristics of one area. |
| 1.3.6.1.4.1.4874.2.2.14.1.2.1.1 | ColumnjuniOspfAreaType | read-only | current | The type of this area. |
| 1.3.6.1.4.1.4874.2.2.14.1.2.1.2 | ColumnjuniOspfAreaTeCapable | read-write | current | Configure the specified area TE capable to flood the TE information. |
| 1.3.6.1.4.1.4874.2.2.14.1.7 | TablejuniOspfIfTable | not-accessible | current | The Juniper OSPF interface table describes the OSPF-specific characteristics of interfaces. |
| 1.3.6.1.4.1.4874.2.2.14.1.7.1 | RowjuniOspfIfEntry | not-accessible | current | The OSPF interface entry describes OSPF-specific characteristics of one interface. |
| 1.3.6.1.4.1.4874.2.2.14.1.7.1.1 | ColumnjuniOspfIfCost | read-create | current | The cost value for this interface. |
| 1.3.6.1.4.1.4874.2.2.14.1.7.1.2 | ColumnjuniOspfIfMask | read-create | current | The mask used to derive the network range of this interface. |
| 1.3.6.1.4.1.4874.2.2.14.1.7.1.3 | ColumnjuniOspfIfPassiveFlag | read-create | current | Flag to indicate whether routing updates should be suppressed on this interface. To actively perform routing updates, set this object to disabled(0). |
| 1.3.6.1.4.1.4874.2.2.14.1.7.1.4 | ColumnjuniOspfIfNbrCount | read-only | current | Number of OSPF neighbors from this interface. |
| 1.3.6.1.4.1.4874.2.2.14.1.7.1.5 | ColumnjuniOspfIfAdjNbrCount | read-only | current | Number of OSPF adjacent neighbors from this interface. |
| 1.3.6.1.4.1.4874.2.2.14.1.7.1.6 | ColumnjuniOspfIfMd5AuthKey | read-create | current | The MD5 authentication key. When setting this object, the juniOspfIfMd5AuthKeyId must be specified on the same PDU. For simple text authentication type, use os… |
| 1.3.6.1.4.1.4874.2.2.14.1.7.1.7 | ColumnjuniOspfIfMd5AuthKeyId | read-create | current | The MD5 authentication key ID. When setting this object, juniOspfIfMd5AuthKey must be specified on the same PDU. |
| 1.3.6.1.4.1.4874.2.2.14.1.8 | TablejuniOspfIfBFDTable | not-accessible | current | The Juniper OSPF interface table describes the BFD-specific characteristics of interfaces. |
| 1.3.6.1.4.1.4874.2.2.14.1.8.1 | RowjuniOspfIfBFDEntry | not-accessible | current | The Juniper OSPF interface table describes the BFD-specific characteristics of one interface. |
| 1.3.6.1.4.1.4874.2.2.14.1.8.1.1 | ColumnjuniOspfIfBfdEnable | read-create | current | This variable indicates whether BFD session on the interface is active or not |
| 1.3.6.1.4.1.4874.2.2.14.1.8.1.2 | ColumnjuniOspfIfBfdMinRxInterval | read-create | current | This variable specifies upper-limit on rate local-system requires remote-system to transmit bfd control-packets [milliseconds] |
| 1.3.6.1.4.1.4874.2.2.14.1.8.1.3 | ColumnjuniOspfIfBfdMinTxInterval | read-create | current | This variable specifies lower-limit on rate local-system requires remote-system to transmit bfd control-packets [milliseconds] |
| 1.3.6.1.4.1.4874.2.2.14.1.8.1.4 | ColumnjuniOspfIfBfdMultiplier | read-create | current | This variable specifies detection-multiplier |
| 1.3.6.1.4.1.4874.2.2.14.1.9 | TablejuniOspfVirtIfTable | not-accessible | current | The Juniper OSPF virtual interface table describes the OSPF-specific characteristics of virtual interfaces. |
| 1.3.6.1.4.1.4874.2.2.14.1.9.1 | RowjuniOspfVirtIfEntry | not-accessible | current | The OSPF virtual interface entry describes OSPF-specific characteristics of one virtual interface. |
| 1.3.6.1.4.1.4874.2.2.14.1.9.1.1 | ColumnjuniOspfVirtIfMd5AuthKey | read-create | current | The MD5 authentication key. When setting this object, the juniOspfVirtIfMd5AuthKeyId must be specified on the same PDU. For simple text authentication type, us… |
| 1.3.6.1.4.1.4874.2.2.14.1.9.1.2 | ColumnjuniOspfVirtIfMd5AuthKeyId | read-create | current | The MD5 authentication key id. When setting this object, juniOspfVirtIfMd5AuthKey must be specified on the same psu. |
| 1.3.6.1.4.1.4874.2.2.14.1.10 | TablejuniOspfNbrTable | not-accessible | current | The Juniper OSPF neighbor table describes the OSPF-specific characteristics of neighbors. |
| 1.3.6.1.4.1.4874.2.2.14.1.10.1 | RowjuniOspfNbrEntry | not-accessible | current | The OSPF neighbor entry describes OSPF-specific characteristics of one neighbor. |
| 1.3.6.1.4.1.4874.2.2.14.1.10.1.1 | ColumnjuniOspfNbrLocalIpAddr | read-only | current | The local IP address on this OSPF circuit. |
| 1.3.6.1.4.1.4874.2.2.14.1.10.1.2 | ColumnjuniOspfNbrDR | read-only | current | The neighbor's idea of designated router. |
| 1.3.6.1.4.1.4874.2.2.14.1.10.1.3 | ColumnjuniOspfNbrBDR | read-only | current | The neighbor's idea of backup designated router. |
| 1.3.6.1.4.1.4874.2.2.14.1.15 | TablejuniOspfSummImportTable | not-accessible | current | The Juniper OSPF summary import table describes the OSPF-specific characteristics of network aggregation into the OSPF autonomous system. With this table, the … |
| 1.3.6.1.4.1.4874.2.2.14.1.15.1 | RowjuniOspfSummImportEntry | not-accessible | current | The OSPF summary import entry describes OSPF-specific characteristics of one summary report. |
| 1.3.6.1.4.1.4874.2.2.14.1.15.1.1 | ColumnjuniOspfSummAggNet | read-only | current | The summary address for a range of addresses. |
| 1.3.6.1.4.1.4874.2.2.14.1.15.1.2 | ColumnjuniOspfSummAggMask | read-only | current | The subnet mask used for the summary route. |
| 1.3.6.1.4.1.4874.2.2.14.1.15.1.3 | ColumnjuniOspfSummAdminStat | read-create | current | The admin status of this summary aggregation. |
| 1.3.6.1.4.1.4874.2.2.14.1.15.1.4 | ColumnjuniOspfSummRowStatus | read-create | current | This variable displays the status of the entry. |
| 1.3.6.1.4.1.4874.2.2.14.1.16 | TablejuniOspfMd5IntfTable | not-accessible | current | The Juniper OSPF interface MD5 key table describes OSPF-specific characteristics of the MD5 authentication key for the OSPF interfaces. This table is not to be… |
| 1.3.6.1.4.1.4874.2.2.14.1.16.1 | RowjuniOspfMd5IntfEntry | not-accessible | current | The OSPF interface MD5 key entry describes OSPF-specific characteristics of one MD5 authentication's interface. |
| 1.3.6.1.4.1.4874.2.2.14.1.16.1.1 | ColumnjuniOspfMd5IntfKeyId | read-only | current | The OSPF interface this key belongs to. |
| 1.3.6.1.4.1.4874.2.2.14.1.16.1.2 | ColumnjuniOspfMd5IntfKeyActive | read-create | deprecated | Set this object to true(1) in order to have this key active. |
| 1.3.6.1.4.1.4874.2.2.14.1.16.1.3 | ColumnjuniOspfMd5IntfAuthKey | read-create | current | The MD5 authentication key. If key given has less than 16 octets, such value will be appended with zeros to complete 16 octets. The zeros will appended to the … |
| 1.3.6.1.4.1.4874.2.2.14.1.16.1.4 | ColumnjuniOspfMd5IntfRowStatus | read-create | current | This variable displays the status of the entry. |
| 1.3.6.1.4.1.4874.2.2.14.1.17 | TablejuniOspfMd5VirtIntfTable | not-accessible | current | The Juniper OSPF interface MD5 key table describes OSPF-specific characteristics of the MD5 authentication key for the OSPF interfaces. This table is not to be… |
| 1.3.6.1.4.1.4874.2.2.14.1.17.1 | RowjuniOspfMd5VirtIntfEntry | not-accessible | current | The OSPF Interface MD5 Key entry describes OSPF-specific characteristics of one MD5 authentication's interface. |
| 1.3.6.1.4.1.4874.2.2.14.1.17.1.1 | ColumnjuniOspfMd5VirtIntfAreaId | read-only | current | The OSPF area ID this key belongs to. |
| 1.3.6.1.4.1.4874.2.2.14.1.17.1.2 | ColumnjuniOspfMd5VirtIntfNeighbor | read-only | current | The OSPF neightbor this key belongs to. |
| 1.3.6.1.4.1.4874.2.2.14.1.17.1.3 | ColumnjuniOspfMd5VirtIntfKeyId | read-only | current | The OSPF virtual interface this key belongs to. |
| 1.3.6.1.4.1.4874.2.2.14.1.17.1.4 | ColumnjuniOspfMd5VirtIntfKeyActive | read-create | deprecated | Set this object to true(1) in order to have this key active. |
| 1.3.6.1.4.1.4874.2.2.14.1.17.1.5 | ColumnjuniOspfMd5VirtIntfAuthKey | read-create | current | The MD5 authentication key. If key given has less than 16 octets, such value will be appended with zeros to complete 16 octets. The zeros will appended to the … |
| 1.3.6.1.4.1.4874.2.2.14.1.17.1.6 | ColumnjuniOspfMd5VirtIntfRowStatus | read-create | current | This variable displays the status of the entry. |
| 1.3.6.1.4.1.4874.2.2.14.1.18 | TablejuniOspfNetworkRangeTable | not-accessible | current | The Juniper OSPF network range table describes the OSPF-specific characteristics of network ranges, encompassing one or multiple OSPF interfaces. |
| 1.3.6.1.4.1.4874.2.2.14.1.18.1 | RowjuniOspfNetworkRangeEntry | not-accessible | current | The Juniper OSPF network range entry describes OSPF-specific characteristics of one OSPF network range. |
| 1.3.6.1.4.1.4874.2.2.14.1.18.1.1 | ColumnjuniOspfNetRangeNet | read-only | current | The network range address. |
| 1.3.6.1.4.1.4874.2.2.14.1.18.1.2 | ColumnjuniOspfNetRangeMask | read-only | current | The subnet mask used for the network range. Unlike the mask used under the command line interface (CLI), this object is set in the non-inversed format (i.e. no… |
| 1.3.6.1.4.1.4874.2.2.14.1.18.1.3 | ColumnjuniOspfNetRangeAreaId | read-only | current | The OSPF area ID this network range belongs to. |
| 1.3.6.1.4.1.4874.2.2.14.1.18.1.4 | ColumnjuniOspfNetRangeRowStatus | read-create | current | This variable displays the status of the entry. |
| 1.3.6.1.4.1.4874.2.2.14.4 | NodejuniOspfConformance | |||
| 1.3.6.1.4.1.4874.2.2.14.4.1 | NodejuniOspfCompliances | |||
| 1.3.6.1.4.1.4874.2.2.14.4.1.1 | CompliancejuniOspfCompliance | obsolete | Obsolete compliance statement for entities which implement the Juniper OSPF MIB. This statement became obsolete when juniOspfVpnRouteTag, juniOspfDomainId, jun… | |
| 1.3.6.1.4.1.4874.2.2.14.4.1.2 | CompliancejuniOspfCompliance2 | obsolete | The compliance statement for entities which implement the Juniper OSPF MIB. This statement became obsolete when juniOspfIfBFDTable was implemented. | |
| 1.3.6.1.4.1.4874.2.2.14.4.1.3 | CompliancejuniOspfCompliance3 | current | The compliance statement for entities which implement the Juniper OSPF MIB. | |
| 1.3.6.1.4.1.4874.2.2.14.4.2 | NodejuniOspfGroups | |||
| 1.3.6.1.4.1.4874.2.2.14.4.2.1 | GroupjuniOspfBasicGroup | obsolete | Obsolete collection of objects for managing general OSPF capabilities in a Juniper product. This group became obsolete when juniOspfVpnRouteTag, juniOspfDomain… | |
| 1.3.6.1.4.1.4874.2.2.14.4.2.2 | GroupjuniOspfIfGroup | current | A collection of objects which augments the standard MIB objects for managing OSPF Interface capabilities in a Juniper product. | |
| 1.3.6.1.4.1.4874.2.2.14.4.2.3 | GroupjuniOspfAreaGroup | current | An object which augments the standard MIB objects for managing OSPF areas capabilities in a Juniper product. | |
| 1.3.6.1.4.1.4874.2.2.14.4.2.4 | GroupjuniOspfVirtIfGroup | current | A collection of objects which augments the standard MIB objects for managing OSPF virtual interface capabilities in a Juniper product. | |
| 1.3.6.1.4.1.4874.2.2.14.4.2.5 | GroupjuniOspfNbrGroup | current | A collection of objects which augments the standard MIB objects for managing OSPF neighbor capabilities in a Juniper product. | |
| 1.3.6.1.4.1.4874.2.2.14.4.2.6 | GroupjuniOspfSummImportGroup | current | A collection of objects for managing OSPF summary report capabilities in a Juniper product. | |
| 1.3.6.1.4.1.4874.2.2.14.4.2.7 | GroupjuniOspfMd5IntfGroup | current | A collection of objects for managing OSPF MD5 interfaces capabilities in a Juniper product. | |
| 1.3.6.1.4.1.4874.2.2.14.4.2.8 | GroupjuniOspfMd5VirtIntfGroup | current | A collection of objects for managing OSPF MD5 virtual interfaces capabilities in a Juniper product. | |
| 1.3.6.1.4.1.4874.2.2.14.4.2.9 | GroupjuniOspfNetRangeGroup | current | A collection of objects for managing OSPF network range capabilities in a Juniper product. | |
| 1.3.6.1.4.1.4874.2.2.14.4.2.10 | GroupjuniOspfBasicGroup2 | current | A collection of objects for managing general OSPF capabilities in a Juniper product. | |
| 1.3.6.1.4.1.4874.2.2.14.4.2.11 | GroupjuniOspfIfBFDGroup | current | A collection of objects for OSPFv2 BFD client configuration. |