KYOCERA-MIB
337 objects
No module-level DESCRIPTION found.
Imported Objects
| HOST-RESOURCES-MIB | hrDeviceIndex |
| Printer-MIB | PresentOnOff prtMarkerIndex |
| RFC1155-SMI | enterprises OBJECT-TYPE |
| RFC1213-MIB | DisplayString |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.1347 | Nodekyocera | |||
| 1.3.6.1.4.1.1347.43 | NodekcPrinter | |||
| 1.3.6.1.4.1.1347.43.5 | NodekcprtGeneral | |||
| 1.3.6.1.4.1.1347.43.5.1 | TablekcprtGeneralTable | not-accessible | mandatory | This table contains the generic parameters that are applied to the KYOCERA network printer. |
| 1.3.6.1.4.1.1347.43.5.1.1 | RowkcprtGeneralEntry | not-accessible | mandatory | A list of general entries for KYOCERA printer. |
| 1.3.6.1.4.1.1347.43.5.1.1.1 | ColumnkcprtGeneralModelName | read-only | mandatory | The printer's model name. |
| 1.3.6.1.4.1.1347.43.5.1.1.2 | ColumnkcprtOptionVersion | read-only | mandatory | The string used for identify the option interface. |
| 1.3.6.1.4.1.1347.43.5.1.1.3 | ColumnkcprtKpdlLevel | read-only | mandatory | The level of KPDL. The value (0) means KPDL is not supported or KPDL ROM is missing. |
| 1.3.6.1.4.1.1347.43.5.1.1.4 | ColumnkcprtSystemUpTime | read-only | mandatory | The amount of time since this printer was last powered on. Unit is second. |
| 1.3.6.1.4.1.1347.43.5.1.1.5 | ColumnkcprtBinNumber | read-only | mandatory | The number of paper bins that is implemented within printer itself. This number does not show all of input bin number. |
| 1.3.6.1.4.1.1347.43.5.1.1.6 | ColumnkcprtCardSlotCapacity | read-only | mandatory | The number of IC card slots that this printer actually has. The value (0) means this printer has no IC card slot. |
| 1.3.6.1.4.1.1347.43.5.1.1.7 | ColumnkcprtRomSlotNumber | read-only | mandatory | The number of option ROM slots. The value (0) means this printer has no option ROM slot. |
| 1.3.6.1.4.1.1347.43.5.1.1.8 | ColumnkcprtSimmSlotCapacity | read-only | mandatory | The number of SIMM slots that this printer actually has. |
| 1.3.6.1.4.1.1347.43.5.1.1.9 | ColumnkcprtSimmSlotUsed | read-only | mandatory | The number of SIMM slots that is currently used for SIMM. |
| 1.3.6.1.4.1.1347.43.5.1.1.10 | ColumnkcprtOriginalMemorySize | read-only | mandatory | The amount of memory that this printer has on its controller board. Note this value does not include any other optional memory. Unit is kilobytes. |
| 1.3.6.1.4.1.1347.43.5.1.1.11 | ColumnkcprtTotalMemorySize | read-only | mandatory | The amount of memory that this printer actually has. Unit is kilobytes. |
| 1.3.6.1.4.1.1347.43.5.1.1.12 | ColumnkcprtUserMemorySize | read-only | mandatory | The amount of memory that is available for user. Unit is kilobyte. |
| 1.3.6.1.4.1.1347.43.5.1.1.13 | ColumnkcprtVirtualMemory | read-only | mandatory | This object shows whether this printer has the virtual memory function. |
| 1.3.6.1.4.1.1347.43.5.1.1.14 | ColumnkcprtPageMemorySize | read-write | mandatory | The page memory size corresponding to the FRPO R5 parameter. Because each model of our printer has slightly different value combination, it is recommended to v… |
| 1.3.6.1.4.1.1347.43.5.1.1.15 | ColumnkcprtHostBufferSize | read-write | mandatory | The host buffer size in units of ten kilobytes. The value(0) means that the host buffer size is 5 Kbytes. |
| 1.3.6.1.4.1.1347.43.5.1.1.16 | ColumnkcprtHostBuffer1stRate | read-write | mandatory | The ratio of the main host buffer size. |
| 1.3.6.1.4.1.1347.43.5.1.1.17 | ColumnkcprtHostBuffer2ndRate | read-write | mandatory | The ratio of the 2nd host buffer size. |
| 1.3.6.1.4.1.1347.43.5.1.1.18 | ColumnkcprtHostBuffer3rdRate | read-write | mandatory | The ratio of the 3rd host buffer size. Note that this entry will be 'not accessible' if the printer has only two interfaces. |
| 1.3.6.1.4.1.1347.43.5.1.1.19 | ColumnkcprtHostBufferOption | read-write | mandatory | In the automatic mode, the first data arriving from the computer go into main buffer (1st buffer). In the fixed mode, each buffer is fixed on the appropriate i… |
| 1.3.6.1.4.1.1347.43.5.1.1.20 | ColumnkcprtBufferXoffLevel | read-write | mandatory | The printer will pause for receiving data when the ratio of occupied data on the host buffer reaches this threshold level. Note that this value should be large… |
| 1.3.6.1.4.1.1347.43.5.1.1.21 | ColumnkcprtBufferXonLevel | read-write | mandatory | The printer will begin to receive data again when the ratio of occupied data on the host buffer becomes lower than this threshould level. Note that value shoul… |
| 1.3.6.1.4.1.1347.43.5.1.1.22 | ColumnkcprtFFTimeout | read-write | mandatory | The form-feed time-out timer in units of five seconds. The value (0) means the time-out timer is off. |
| 1.3.6.1.4.1.1347.43.5.1.1.23 | ColumnkcprtSleepTimer | read-write | mandatory | The value of sleep timer in units of five minutes. The value (0) means the sleep timer is off for previous model than FS-xxxx. The new models that implement kc… |
| 1.3.6.1.4.1.1347.43.5.1.1.24 | ColumnkcprtWakeupStatusPage | read-write | mandatory | If enable, a printer generates the status page each time it comes up. |
| 1.3.6.1.4.1.1347.43.5.1.1.25 | ColumnkcprtOnlineControl | read-write | mandatory | This object controls the on/off line status. Note the writing value does not apply in some situation. |
| 1.3.6.1.4.1.1347.43.5.1.1.26 | ColumnkcprtCopyCount | read-write | mandatory | The default copy number. |
| 1.3.6.1.4.1.1347.43.5.1.1.27 | ColumnkcprtContinueKey | read-write | mandatory | This object corresponds to the printer's CONTINUE key. Writing value (1) has a meaning only when the printer requires it. This object was newly added for FS-17… |
| 1.3.6.1.4.1.1347.43.5.1.1.28 | ColumnkcprtSerialNumber | read-only | mandatory | The octet string corresponding to the printer's serial number. This object was newly added for FS-1700 and FS-3700. |
| 1.3.6.1.4.1.1347.43.5.1.1.29 | ColumnkcprtAssetNumber | read-write | mandatory | The octet string corresponding to the printer's asset number. The format is up to the application. This object was newly added since FS-7000. |
| 1.3.6.1.4.1.1347.43.5.1.1.30 | ColumnkcprtSignature | read-write | mandatory | This object will be used as the signature field. Printer has no responsibility about the contents. In another word, the written value has no menaing for the pr… |
| 1.3.6.1.4.1.1347.43.5.1.1.31 | ColumnkcprtFirmParamCurrentRegister | read-write | mandatory | This object is FRPO parameter's register. |
| 1.3.6.1.4.1.1347.43.5.1.1.32 | ColumnkcprtFirmParamCurrentValue | read-write | mandatory | This object is FRPO parameter's current value. |
| 1.3.6.1.4.1.1347.43.5.1.1.33 | ColumnkcprtSleepMode | read-write | mandatory | When the value is off(0), the printer will never sleep even its sleep timer has appropriate timer value. Note the printer model that has this object cannot use… |
| 1.3.6.1.4.1.1347.43.5.1.1.34 | ColumnkcprtAutoContinueMode | read-write | mandatory | When the value is off(0), the printer will never continue auto. |
| 1.3.6.1.4.1.1347.43.5.1.1.35 | ColumnkcprtAutoContinueTimer | read-write | mandatory | When auto continue is on, this timer value is seted, continue key is pushed after timer value. |
| 1.3.6.1.4.1.1347.43.5.1.1.36 | ColumnkcprtAbsoluteModelName | read-only | mandatory | The printer's absolute model name. |
| 1.3.6.1.4.1.1347.43.5.1.1.37 | ColumnkcprtEquipmentID | read-write | mandatory | The octet string corresponding to the equipment ID. |
| 1.3.6.1.4.1.1347.43.5.1.1.38 | ColumnkcprtMaxCopyCount | read-only | mandatory | Max copy count value. |
| 1.3.6.1.4.1.1347.43.5.4 | TablekcprtCpuTable | not-accessible | mandatory | Information of CPU that is implemented in the printer. |
| 1.3.6.1.4.1.1347.43.5.4.1 | RowkcprtCpuEntry | not-accessible | mandatory | A list of CPU information for KYOCERA printer. |
| 1.3.6.1.4.1.1347.43.5.4.1.1 | ColumnkcprtCpuIndex | not-accessible | mandatory | A unique value used by the printer to identify CPU on the printer's controller. |
| 1.3.6.1.4.1.1347.43.5.4.1.2 | ColumnkcprtCpuName | read-only | mandatory | The CPU model name, such as '68EC040'. |
| 1.3.6.1.4.1.1347.43.5.4.1.3 | ColumnkcprtCpuClock | read-only | mandatory | The clock speed of CPU in unit of MHz. |
| 1.3.6.1.4.1.1347.43.5.4.1.4 | ColumnkcprtCpuRole | read-only | mandatory | The role of this CPU. The value (-1) means others. |
| 1.3.6.1.4.1.1347.43.5.4.1.5 | ColumnkcprtFirmwareVersion | read-only | mandatory | The version string for the firmware of this CPU. |
| 1.3.6.1.4.1.1347.43.5.4.1.6 | ColumnkcprtFirmwareUpdate | read-only | mandatory | Shows whether this firmware can be updated on the controller. |
| 1.3.6.1.4.1.1347.43.8 | NodekcprtInput | |||
| 1.3.6.1.4.1.1347.43.8.1 | TablekcprtInputTable | not-accessible | mandatory | This table contains the basic part of the input unit. The main purpose is to control the MPF. |
| 1.3.6.1.4.1.1347.43.8.1.1 | RowkcprtInputEntry | not-accessible | mandatory | A list of information for the input unit, especially for the MPF. |
| 1.3.6.1.4.1.1347.43.8.1.1.1 | ColumnkcprtInputIndex | not-accessible | mandatory | The value of the prtInputIndex of this printer that this entry is associated with. |
| 1.3.6.1.4.1.1347.43.8.1.1.2 | ColumnkcprtInputMPtrayMode | read-write | mandatory | The value corresponding to the MPF mode. |
| 1.3.6.1.4.1.1347.43.8.1.1.3 | ColumnkcprtInputGroupMember | read-write | mandatory | This object shows the status of grouping. This grouping is also knwon as 'auto cassette' mode. The input subunit with the value member(3) is a member of the ca… |
| 1.3.6.1.4.1.1347.43.8.1.1.4 | ColumnkcprtInputMediaListIndex | read-write | mandatory | This object holds an index value corresponding to kcprtMediaList table. Therefore, this value represents the current media type settings on each input tray. |
| 1.3.6.1.4.1.1347.43.8.1.1.5 | ColumnkcprtInputStatus | read-only | mandatory | |
| 1.3.6.1.4.1.1347.43.8.1.1.6 | ColumnkcprtInputDialPaperSize | read-only | mandatory | |
| 1.3.6.1.4.1.1347.43.8.1.1.7 | ColumnkcprtInputOtherPaperSize | read-write | mandatory | |
| 1.3.6.1.4.1.1347.43.8.1.1.8 | ColumnprtInputCustomDimFeedDirDeclared | read-write | mandatory | This object provides the value of the declared dimension, in the feed direction, of custom that is (or, if empty, was or will be) in this input sub-unit. The f… |
| 1.3.6.1.4.1.1347.43.8.1.1.9 | ColumnprtInputCustomDimXFeedDirDeclared | read-write | mandatory | This object provides the value of the declared dimension, in the cross feed direction, of custom that is (or, if empty, was or will be) in this input sub-unit.… |
| 1.3.6.1.4.1.1347.43.8.1.1.10 | ColumnkcprnInputMediaMatrix | read-only | mandatory | |
| 1.3.6.1.4.1.1347.43.8.1.1.11 | ColumnkcprnInputPaperSizeIndex | read-write | mandatory | |
| 1.3.6.1.4.1.1347.43.8.2 | TablekcprtInputGroupTable | not-accessible | mandatory | This table contains information of the input tray group. |
| 1.3.6.1.4.1.1347.43.8.2.1 | RowkcprtInputGroupEntry | not-accessible | mandatory | Information for the input unit group. |
| 1.3.6.1.4.1.1347.43.8.2.1.1 | ColumnkcprtInputGroupIndex | not-accessible | mandatory | |
| 1.3.6.1.4.1.1347.43.8.2.1.2 | ColumnkcprtInputGroupMode | read-write | mandatory | This object corresponds to the printer system's auto cassette mode. |
| 1.3.6.1.4.1.1347.43.9 | NodekcprtOutput | |||
| 1.3.6.1.4.1.1347.43.9.1 | TablekcprtOutputTable | not-accessible | mandatory | This table contains the basic part of the output unit. The main purpose is to control SO-6. |
| 1.3.6.1.4.1.1347.43.9.1.1 | RowkcprtOutputEntry | not-accessible | mandatory | A list of information for the output unit, especially for the SO-6. |
| 1.3.6.1.4.1.1347.43.9.1.1.1 | ColumnkcprtOutputIndex | not-accessible | mandatory | The value of the prtOutputIndex of this printer that this entry is associated with. |
| 1.3.6.1.4.1.1347.43.9.1.1.2 | ColumnkcprtOutputMode | read-write | mandatory | The operation mode of the sorter. If this device does not support the sorter function, the reading value is (-1) and all writing are ignored. Also, writing val… |
| 1.3.6.1.4.1.1347.43.9.1.1.3 | ColumnkcprtOutputMultiMode | read-write | mandatory | In the multiple mode, the sorter can simultaneously be used by different computers. Each computer may assign its own output trays. This value determines how th… |
| 1.3.6.1.4.1.1347.43.9.1.1.4 | ColumnkcprtOutputGroupNumber | read-only | mandatory | This entry shows how many groups are existing on the output device. |
| 1.3.6.1.4.1.1347.43.9.1.1.5 | ColumnkcprtOutputDefaultGroup | read-write | mandatory | The value of the kcprtTrayGroupIndex corresponding to the current output tray group in a sorter. This value has no meaning if this output unit is not a soter. … |
| 1.3.6.1.4.1.1347.43.9.1.1.6 | ColumnkcprtOutputBulkStatus | read-only | mandatory | This entry shows current status of the bulk tray. Since the bulk tray of SO-6 has only a full sensor, this entry has only two states. In future, the state will… |
| 1.3.6.1.4.1.1347.43.9.1.1.7 | ColumnkcprtOutputTrayMaxCapacity | read-only | mandatory | This entry shows how many pages the tray on this output device can hold. Unit is sheet. |
| 1.3.6.1.4.1.1347.43.9.1.1.8 | ColumnkcprtStapler | read-only | mandatory | This object shows whether or not the stapler device is implemented onto the output subunit. If the device does not have the stapler, the returned value is notP… |
| 1.3.6.1.4.1.1347.43.9.1.1.9 | ColumnkcprtStaplerConsumableState | read-only | mandatory | This object shows the current level of the stapler's consumable (pins). Because the current stapler does not have the inteligent sensor, this object returns at… |
| 1.3.6.1.4.1.1347.43.9.1.1.10 | ColumnkcprtOutputActionOnFull | read-write | mandatory | This object shows the action after output tray full. |
| 1.3.6.1.4.1.1347.43.9.1.1.11 | ColumnkcprtOutputPunchStatus | read-only | mandatory | |
| 1.3.6.1.4.1.1347.43.9.1.1.12 | ColumnkcprtOutputStatus | read-only | mandatory | |
| 1.3.6.1.4.1.1347.43.9.2 | TablekcprtTrayGroupTable | not-accessible | mandatory | The concept of Group is for the multiple computer environment. These contents take effect when kcprtOutputMultiMode is enable. For further information, refer t… |
| 1.3.6.1.4.1.1347.43.9.2.1 | RowkcprtTrayGroupEntry | not-accessible | mandatory | A list of information about the tray group on the multiple tray device. |
| 1.3.6.1.4.1.1347.43.9.2.1.1 | ColumnkcprtTrayGroupIndex | not-accessible | mandatory | The unique value used by the printer to identify each tray groups. Note that this value will be changed while the printer power cycles if Prescribe ASTK comman… |
| 1.3.6.1.4.1.1347.43.9.2.1.2 | ColumnkcprtTrayGroupBeginIndex | read-only | mandatory | The value of the kcprtOutputTrayIndex corresponding to the tray that is assigned as the begining of this group. |
| 1.3.6.1.4.1.1347.43.9.2.1.3 | ColumnkcprtTrayGroupEndIndex | read-only | mandatory | The value of the kcprtOutputTrayIndex corresponding to the tray that is assigned as the end of this group. This index is automatically assigned by the printer … |
| 1.3.6.1.4.1.1347.43.9.3 | TablekcprtOutputTrayTable | not-accessible | mandatory | Note in case of off (0), the access to this content is ineffective. |
| 1.3.6.1.4.1.1347.43.9.3.1 | RowkcprtOutputTrayEntry | not-accessible | mandatory | A list of information about the individual tray. |
| 1.3.6.1.4.1.1347.43.9.3.1.1 | ColumnkcprtOutputTrayIndex | not-accessible | mandatory | The unique value used by a printer to identify each trays. Values are expected to remain stable across successive printer power cycle. This contents has no mea… |
| 1.3.6.1.4.1.1347.43.9.3.1.2 | ColumnkcprtOutputTrayOrder | read-only | mandatory | The output order for trays. The beginning number is (1) and the last number should be equal to the maximum tray number. When the multiple mode is available, th… |
| 1.3.6.1.4.1.1347.43.9.3.1.3 | ColumnkcprtOutputTrayGroup | read-only | mandatory | The value of kcprtTrayGroupIndex corresponding to the group that this tray is assigned to. The value (0) means this tray is not assigned to a group or the mult… |
| 1.3.6.1.4.1.1347.43.9.3.1.4 | ColumnkcprtOutputTrayCount | read-only | mandatory | The count of page that the tray may be holding. Since the tray cannot count the page that it has currently, the value is not always same as the actual page cou… |
| 1.3.6.1.4.1.1347.43.9.3.1.5 | ColumnkcprtOutputTrayName | read-write | mandatory | The name of tray is setted by user. |
| 1.3.6.1.4.1.1347.43.9.4 | TablekcprtPunchGroupTable | not-accessible | mandatory | Note in case of off (0), the access to this content is ineffective. |
| 1.3.6.1.4.1.1347.43.9.4.1 | RowkcprtPunchGroupEntry | not-accessible | mandatory | A list of information about the punch. |
| 1.3.6.1.4.1.1347.43.9.4.1.1 | ColumnkcprtPunchGroupIndex | not-accessible | mandatory | |
| 1.3.6.1.4.1.1347.43.9.4.1.2 | ColumnkcprtPunchGroupName | read-only | mandatory | The punch group name. main or sub. |
| 1.3.6.1.4.1.1347.43.9.4.1.3 | ColumnkcprtPunchGroupHoleNumber | read-only | mandatory | The value(2) is overseas centimeter or internal .The value(3) is overseas centimeter.The value(4) is france or sweden. The value(0) is US. |
| 1.3.6.1.4.1.1347.43.9.4.1.4 | ColumnkcprtPunchGroupType | read-only | mandatory | The punch group type.The US is overseas inch. The SE is sweden. The FR is france. The EU is overseas centimeter. The JP is internal. |
| 1.3.6.1.4.1.1347.43.10 | NodekcprtMarker | |||
| 1.3.6.1.4.1.1347.43.10.1 | TablekcprtMarkerTable | not-accessible | mandatory | This table contains some useful entries to control the marker specific function. |
| 1.3.6.1.4.1.1347.43.10.1.1 | RowkcprtMarkerEntry | not-accessible | mandatory | A list of entries that corresponds each function of the marker. |
| 1.3.6.1.4.1.1347.43.10.1.1.1 | ColumnkcprtMarkerIndex | not-accessible | mandatory | The value of the prtMarkerIndex of the printer devices with which it is associated. |
| 1.3.6.1.4.1.1347.43.10.1.1.2 | ColumnkcprtMarkerKirLevel | read-write | mandatory | The value that shows current KIR level. The value (0) means off or not support (0). |
| 1.3.6.1.4.1.1347.43.10.1.1.3 | ColumnkcprtMarkerEcoprintLevel | read-write | mandatory | The value that shows current Ecoprint level. The value (0) means off or not support. |
| 1.3.6.1.4.1.1347.43.10.1.1.4 | ColumnkcprtMarkerAddressabilityFeedDirDeclared | read-write | mandatory | This object provides the value of the declared addressability, in the feed direction, of this marker. This addressability is measured in prtMarkerAddressabilit… |
| 1.3.6.1.4.1.1347.43.10.1.1.5 | ColumnkcprtMarkerAddressabilityXFeedDirDeclared | read-write | mandatory | This object provides the value of declared dimension, in the cross feed direction, of this marker device. This addressability is measured in prtMarkerAddressab… |
| 1.3.6.1.4.1.1347.43.10.1.1.6 | ColumnkcprtMarkerAddressabilityFeedDirChosen | read-only | mandatory | The value of the addressability, in the feed direction, chosen by the printer. If the printer supports the declared addressability, this addressability is the … |
| 1.3.6.1.4.1.1347.43.10.1.1.7 | ColumnkcprtMarkerAddressabilityXFeedDirChosen | read-only | mandatory | The value of the addressability, in the cross feed direction, chosen by the printer. If the printer supports the declared addressability, this addressability i… |
| 1.3.6.1.4.1.1347.43.10.1.1.8 | ColumnkcprtMarkerDrumCounter | read-only | mandatory | The value of the drum counter. This value may not be same as any counter in the prtMarker group. The unit is prtMarkerCounterUnit. This object was newly added … |
| 1.3.6.1.4.1.1347.43.10.1.1.9 | ColumnkcprtMarkerColorMode | read-write | mandatory | This object shows the current color mode of this marker device. |
| 1.3.6.1.4.1.1347.43.10.1.1.10 | ColumnkcprtMarkerBitsPerPixel | read-write | mandatory | This object shows Bit/Pixel value. |
| 1.3.6.1.4.1.1347.43.10.1.1.11 | ColumnkcprtMarkerGlossMode | read-write | mandatory | This object shows Gloss mode value. |
| 1.3.6.1.4.1.1347.43.10.1.1.12 | ColumnkcprtMarkerServiceCount | read-only | mandatory | Added by Observium Developers |
| 1.3.6.1.4.1.1347.43.12 | NodekcprtColorant | |||
| 1.3.6.1.4.1.1347.43.12.1 | TablekcprtColorantGeneralTable | not-accessible | mandatory | |
| 1.3.6.1.4.1.1347.43.12.1.1 | RowkcprtColorantGeneralEntry | not-accessible | mandatory | |
| 1.3.6.1.4.1.1347.43.12.1.1.1 | ColumnkcprtColorQuality | read-only | optional | Shows current quarity in color mode. If the printer does not support color, a value of notSupported(-2) is returned. |
| 1.3.6.1.4.1.1347.43.12.1.1.2 | ColumnkcprtColorMatching | read-only | optional | Shows the color matching mode. If printer does not support color, this object will always give notSupported(-2), or this object will not be implemented. Displa… |
| 1.3.6.1.4.1.1347.43.12.1.1.3 | ColumnkcprtColorantIdentifier | read-only | optional | Some identifier to identify the color unit uniquely. |
| 1.3.6.1.4.1.1347.43.12.1.1.4 | ColumnkcprtRGBSimulation | read-only | optional | Shows the color RGB\81@Simulation. |
| 1.3.6.1.4.1.1347.43.12.1.1.5 | ColumnkcprtCMYKSimulation | read-only | optional | Shows the color CMYK\81@Simulation. |
| 1.3.6.1.4.1.1347.43.14 | NodekcprtChannel | |||
| 1.3.6.1.4.1.1347.43.14.1 | TablekcprtChannelTable | not-accessible | mandatory | This table control's HEX dump function. |
| 1.3.6.1.4.1.1347.43.14.1.1 | RowkcprtChannelEntry | not-accessible | mandatory | |
| 1.3.6.1.4.1.1347.43.14.1.1.1 | ColumnkcprtChannelIndex | not-accessible | mandatory | The value of the prtChannelIndex of the printer device that this prtChannelEntry is associated with. |
| 1.3.6.1.4.1.1347.43.14.1.1.2 | ColumnkcprtChannelMode | read-write | mandatory | The current state of the mode of this channel. KYOCERA printer can set the hex dump mode to interface (channel). Writing affects all interface(channel).This se… |
| 1.3.6.1.4.1.1347.43.14.1.1.3 | ColumnkcprtChannelCopyCount | read-write | mandatory | The value corresponding to the copy count for each channel (interface). Kyocera printer manages the value for each interface individually. This object was newl… |
| 1.3.6.1.4.1.1347.43.14.1.1.4 | ColumnkcprtChannelResolution | read-write | mandatory | The value corresponding to the resolution for each channel (interface). Kyocera printer manages this setting for each interface individually. This object was n… |
| 1.3.6.1.4.1.1347.43.14.1.1.5 | ColumnkcprtChannelPaperSize | read-write | mandatory | This value shows the current setting of the paper size for this channel. Kyocera printer manages this setting of each interface individually. This object was n… |
| 1.3.6.1.4.1.1347.43.14.1.1.6 | ColumnkcprtHostBufferRatio | read-write | optional | This object shows the current ratio of each host buffer blocks. If kcprtHostBufferOption is automatic, there is no actual relation between the host buffer bloc… |
| 1.3.6.1.4.1.1347.43.14.1.1.7 | ColumnkcprtChannelErrorCounter | read-only | optional | This object shows the error counter of each channel. When it reaches its maximum value, it will return to zero. |
| 1.3.6.1.4.1.1347.43.17 | NodekcprtBuzzer | |||
| 1.3.6.1.4.1.1347.43.17.1 | TablekcprtBuzzerTable | not-accessible | mandatory | This table contains information for each Buzzer device. This group was newly added for FS-1700 and FS-3700. |
| 1.3.6.1.4.1.1347.43.17.1.1 | RowkcprtBuzzerEntry | not-accessible | mandatory | A list of entries that are corresponding to each functions for the buzzer. |
| 1.3.6.1.4.1.1347.43.17.1.1.1 | ColumnkcprtBuzzerIndex | not-accessible | mandatory | The index used by the printer to identify each buzzer device. This value will not change while power cycle. |
| 1.3.6.1.4.1.1347.43.17.1.1.2 | ColumnkcprtBuzzerOnTime | read-only | mandatory | The time in milliseconds while the buzzer is beeping. If this value is 0, it means the buzzer is not beeping. This object can have three values, 0, 200 and 400. |
| 1.3.6.1.4.1.1347.43.17.1.1.3 | ColumnkcprtBuzzerOffTime | read-only | mandatory | The time in milliseconds while the buzzer is not beeping. This object can have three values, 9, 200, and 400. |
| 1.3.6.1.4.1.1347.43.17.1.1.4 | ColumnkcprtBuzzerMode | read-write | mandatory | If the value is On, the buzzer will be activated in the case of printer's error events. Note that this object cannot stop the buzzer that has already been beep… |
| 1.3.6.1.4.1.1347.43.17.1.1.5 | ColumnkcprtBuzzerTone | read-only | mandatory | The value showing the buzzer's output frequency in mega hertz. |
| 1.3.6.1.4.1.1347.43.18 | NodekcprtAlert | |||
| 1.3.6.1.4.1.1347.43.18.1 | TablekcprtAlertTable | not-accessible | mandatory | |
| 1.3.6.1.4.1.1347.43.18.1.1 | RowkcprtAlertEntry | not-accessible | mandatory | |
| 1.3.6.1.4.1.1347.43.18.1.1.1 | ColumnkcprtAlertIndex | not-accessible | mandatory | |
| 1.3.6.1.4.1.1347.43.18.1.1.2 | ColumnkcprtAlertInformation | read-only | mandatory | |
| 1.3.6.1.4.1.1347.43.18.2 | TablekcprtAlertStateTable | not-accessible | mandatory | |
| 1.3.6.1.4.1.1347.43.18.2.1 | RowkcprtAlertStateEntry | not-accessible | mandatory | |
| 1.3.6.1.4.1.1347.43.18.2.1.1 | ColumnkcprtAlertStateDisplayIndex | not-accessible | mandatory | |
| 1.3.6.1.4.1.1347.43.18.2.1.2 | ColumnkcprtAlertStateDisplay | read-only | mandatory | |
| 1.3.6.1.4.1.1347.43.18.2.1.3 | ColumnkcprtAlertStateCode | read-only | mandatory | |
| 1.3.6.1.4.1.1347.43.18.3 | TablekcprtAlertJamLogTable | not-accessible | mandatory | JAM\97\9A\97\F0\83\8D\83O\8F\EE\95\F1\82\F0\8AǗ\9D\82\B7\82\E9\83e\81[\83u\83\8B |
| 1.3.6.1.4.1.1347.43.18.3.1 | RowkcprtAlertJamLogEntry | not-accessible | mandatory | JAM\97\9A\97\F0\83\8D\83O\83e\81[\83u\83\8B\82̃G\83\93\83g\83\8A |
| 1.3.6.1.4.1.1347.43.18.3.1.1 | ColumnkcprtAlertJamLogIndex | not-accessible | mandatory | JAM\97\9A\97\F0\83\8D\83O\82\F0\8E\AF\95ʂ\B7\82邽\82߂̃C\83\93\83f\83b\83N\83X |
| 1.3.6.1.4.1.1347.43.18.3.1.2 | ColumnkcprtAlertJamLogStamp | read-only | mandatory | JAM \94\AD\90\B6\8E\9E\82̃g\81[\83^\83\8B\83J\83E\83\93\83^\92l |
| 1.3.6.1.4.1.1347.43.18.3.1.3 | ColumnkcprtAlertJamLogFactor | read-only | mandatory | JAM\94\AD\90\B6\8E\9E\82\CCJAM\97v\88\F6\83R\81[\83h\82\F0\8E\A6\82\B7\95\B6\8E\9A\97\F1\81BJ01\81AJ02\A5\A5\A5\81B |
| 1.3.6.1.4.1.1347.43.18.3.1.4 | ColumnkcprtAlertJamLogPosition | read-only | mandatory | JAM\94\AD\90\B6\8E\9E\82\CCJAM\88ʒu\82\F0\8E\A6\82\B7\95\B6\8E\9A\97\F1\81B1\81A2\81A3\81A4\81AA\81AB\81AC\A5\A5\A5\81B |
| 1.3.6.1.4.1.1347.43.18.3.1.5 | ColumnkcprtAlertJamLogInput | read-only | mandatory | JAM\94\AD\90\B6\8E\9E\82ɗp\8E\86\82\F0\88\F8\82\A2\82\BD\8B\8B\8E\86\92i\81B\92l\82\CDPrescribe\82\CCPSRC\92l |
| 1.3.6.1.4.1.1347.43.18.3.1.6 | ColumnkcprtAlertJamLogPaper | read-only | mandatory | JAM\94\AD\90\B6\8E\9E\82̗p\8E\86\83T\83C\83Y\81B\92l\82\CDPrescribe\82\CCSPSZ\92l |
| 1.3.6.1.4.1.1347.43.18.3.1.7 | ColumnkcprtAlertJamLogMedia | read-only | mandatory | JAM\94\AD\90\B6\8E\9E\82̗p\8E\86\83^\83C\83v\81B\92l\82\CDPrescribe\82\CCMTYP\92l |
| 1.3.6.1.4.1.1347.43.18.3.1.8 | ColumnkcprtAlertJamLogOutput | read-only | mandatory | JAM\94\AD\90\B6\8E\9E\82̔r\8Fo\90\E6\81B\92l\82\CDPrescribe\82\CCOTRY\92l |
| 1.3.6.1.4.1.1347.43.18.4 | TablekcprtAlertCallLogTable | not-accessible | mandatory | Call Service\97\9A\97\F0\83\8D\83O\8F\EE\95\F1\82\F0\8AǗ\9D\82\B7\82\E9\83e\81[\83u\83\8B |
| 1.3.6.1.4.1.1347.43.18.4.1 | RowkcprtAlertCallLogEntry | not-accessible | mandatory | Call Service\97\9A\97\F0\83\8D\83O\83e\81[\83u\83\8B\82̃G\83\93\83g\83\8A |
| 1.3.6.1.4.1.1347.43.18.4.1.1 | ColumnkcprtAlertCallLogIndex | not-accessible | mandatory | Call Service\97\9A\97\F0\83\8D\83O\82\F0\8E\AF\95ʂ\B7\82邽\82߂̃C\83\93\83f\83b\83N\83X |
| 1.3.6.1.4.1.1347.43.18.4.1.2 | ColumnkcprtAlertCallLogStamp | read-only | mandatory | Call Service\94\AD\90\B6\8E\9E\82̃g\81[\83^\83\8B\83J\83E\83\93\83^\92l |
| 1.3.6.1.4.1.1347.43.18.4.1.3 | ColumnkcprtAlertCallLogFactor | read-only | mandatory | Call Service\94\AD\90\B6\8E\9E\82\CCCall Service\83R\81[\83h\81iCall\94ԍ\86\81j\82\A8\82\E6\82ь̏\E1\90藣\82\B5\83R\81[\83h\82\F0\8E\A6\82\B7\95\B6\8E\9A\… |
| 1.3.6.1.4.1.1347.43.18.5 | TablekcprtAlertChangeLogTable | not-accessible | mandatory | |
| 1.3.6.1.4.1.1347.43.18.5.1 | RowkcprtAlertChangeLogEntry | not-accessible | mandatory | \8F\C1\96Օi\8C\F0\8A\B7\97\9A\97\F0\83\8D\83O\83e\81[\83u\83\8B\82̃G\83\93\83g\83\8A |
| 1.3.6.1.4.1.1347.43.18.5.1.1 | ColumnkcprtAlertChangeLogIndex | not-accessible | mandatory | \8F\C1\96Օi\8C\F0\8A\B7\97\9A\97\F0\83\8D\83O\82\F0\8E\AF\95ʂ\B7\82邽\82߂̃C\83\93\83f\83b\83N\83X |
| 1.3.6.1.4.1.1347.43.18.5.1.2 | ColumnkcprtAlertChangeLogStamp | read-only | mandatory | \8F\C1\96Օi\8C\F0\8A\B7\94\AD\90\B6\8E\9E\82̃g\81[\83^\83\8B\83J\83E\83\93\83^\92l |
| 1.3.6.1.4.1.1347.43.18.5.1.3 | ColumnkcprtAlertChangeLogKind | read-only | mandatory | |
| 1.3.6.1.4.1.1347.43.18.6 | TablekcprtAlertEventCountTable | not-accessible | mandatory | JAM\81ACall Service\81A\8F\C1\96Օi\8C\F0\8A\B7\93\99\82̃C\83x\83\93\83g\94\AD\90\B6\89\EE\95\F1\82\F0\8AǗ\9D\82\B7\82\E9\83e\81[\83u\83\8B |
| 1.3.6.1.4.1.1347.43.18.6.1 | RowkcprtAlertEventCountEntry | not-accessible | mandatory | |
| 1.3.6.1.4.1.1347.43.18.6.1.1 | ColumnkcprtAlertEventCountIndex | not-accessible | mandatory | \83C\83x\83\93\83g\94\AD\90\B6\89J\83E\83\93\83g\82\F0\8E\AF\95ʂ\B7\82邽\82߂̃C\83\93\83f\83b\83N\83X |
| 1.3.6.1.4.1.1347.43.18.6.1.2 | ColumnkcprtAlertEventCountFactor | read-only | mandatory | \94\AD\90\B6\83C\83x\83\93\83g\82\F0\8E\A6\82\B7\95\B6\8E\9A\97\F1\81iJAM\97v\88\F6\83R\81[\83h\81ACall Serive\83R\81[\83h\81A\8C\F0\8A\B7\83A\83C\83e\83\80\83… |
| 1.3.6.1.4.1.1347.43.18.6.1.3 | ColumnkcprtAlertEventCountValue | read-only | mandatory | kcprtAlertEventCountFactor\82Œʒm\82\B3\82\EA\82\E9\83C\83x\83\93\83g\82\AA\94\AD\90\B6\82\B5\82\BD\89\F1\90\94 |
| 1.3.6.1.4.1.1347.43.20 | NodekcprtMemoryResource | |||
| 1.3.6.1.4.1.1347.43.20.1 | TablekcprtMemoryDeviceTable | not-accessible | mandatory | This table contains information for each memory device, such as the IC-Card. |
| 1.3.6.1.4.1.1347.43.20.1.1 | RowkcprtMemoryDeviceEntry | not-accessible | mandatory | A list of entries that are corresponding to the each function of the memory device. |
| 1.3.6.1.4.1.1347.43.20.1.1.1 | ColumnkcprtMemoryDeviceIndex | not-accessible | mandatory | A unique value that is corresponding to each memory device, such as IC-Card. The value assignment will change if the IC-Card is removed or inserted. |
| 1.3.6.1.4.1.1347.43.20.1.1.2 | ColumnkcprtMemoryDeviceLocation | read-only | mandatory | The value shows the location of this memory device. Note that if the location is download area, only the resource that has been assigned to the current interfa… |
| 1.3.6.1.4.1.1347.43.20.1.1.3 | ColumnkcprtMemoryDeviceType | read-only | mandatory | The value shows the type of this memory device. |
| 1.3.6.1.4.1.1347.43.20.1.1.4 | ColumnkcprtMemoryDeviceTotalSize | read-write | mandatory | The maximum space of the memory device. Unit is bytes. |
| 1.3.6.1.4.1.1347.43.20.1.1.5 | ColumnkcprtMemoryDeviceUsedSize | read-only | mandatory | The amount of occupied space on the device. Unit is bytes. If the device cannot detect the amount, the value is (-1). |
| 1.3.6.1.4.1.1347.43.20.1.1.6 | ColumnkcprtMemoryDeviceStatus | read-write | mandatory | This value shows current status of this device. notAccessible means that the printer recognized the device but the access is impossible. lowBattery is for a ki… |
| 1.3.6.1.4.1.1347.43.20.1.1.7 | ColumnkcprtMemoryDeviceUnit | read-only | mandatory | |
| 1.3.6.1.4.1.1347.43.20.2 | TablekcprtPartitionTable | not-accessible | mandatory | This table contains partition information for each device. |
| 1.3.6.1.4.1.1347.43.20.2.1 | RowkcprtPartitionEntry | not-accessible | mandatory | A list of entries that is corresponding to the each information about the partition. |
| 1.3.6.1.4.1.1347.43.20.2.1.1 | ColumnkcprtPartitionIndex | not-accessible | mandatory | A unique value corresponding to the each partition on the printer's memory device. This assigment will change in some cases. |
| 1.3.6.1.4.1.1347.43.20.2.1.2 | ColumnkcprtPartitionSize | read-only | mandatory | This value shows the size of this partition. Unit is byte. |
| 1.3.6.1.4.1.1347.43.20.2.1.3 | ColumnkcprtPartitionLocation | read-only | mandatory | This value of kcprtMemoryDeviceIndex corresponding to the device on which this partition exists. If the device is unknown, this value is (-1). |
| 1.3.6.1.4.1.1347.43.20.2.1.4 | ColumnkcprtPartitionResourceType | read-only | mandatory | The type of the resource that is using this partition. |
| 1.3.6.1.4.1.1347.43.20.2.1.5 | ColumnkcprtPartitionName | read-only | mandatory | The name that is assigned to this partition. |
| 1.3.6.1.4.1.1347.43.20.2.1.6 | ColumnkcprtPartitionLoad | read-only | mandatory | This value shows whether this partition has been read by the printer. basically, the resource should be read by the printer to make it available. |
| 1.3.6.1.4.1.1347.43.20.3 | TablekcprtMacroDataTable | not-accessible | mandatory | This table contains information about MACRO resource. |
| 1.3.6.1.4.1.1347.43.20.3.1 | RowkcprtMacroDataEntry | not-accessible | mandatory | |
| 1.3.6.1.4.1.1347.43.20.3.1.1 | ColumnkcprtMacroDataIndex | not-accessible | mandatory | |
| 1.3.6.1.4.1.1347.43.20.3.1.2 | ColumnkcprtMacroDataName | read-only | mandatory | This value will be effective if the macro is described in Prescribe. Otherwise, this value will be NULL. |
| 1.3.6.1.4.1.1347.43.20.3.1.3 | ColumnkcprtMacroDataID | read-only | mandatory | This value will be effective if the macro is described in PCL. Otherwise, the value will be unknown(-1). |
| 1.3.6.1.4.1.1347.43.20.3.1.4 | ColumnkcprtMacroDataType | read-only | mandatory | This value is corresponding to the PDL that is used for decribing this macro. |
| 1.3.6.1.4.1.1347.43.20.3.1.5 | ColumnkcprtMacroDataAutoLoad | read-only | mandatory | This value shows the state of the form overlay function that is controled by AMCR command. Only one macro can be set as 'on', so at most one entry will have 'o… |
| 1.3.6.1.4.1.1347.43.20.3.1.6 | ColumnkcprtMacroDataLocation | read-only | mandatory | The value of kcprtMemoryDeviceIndex correspinding to the device that this macro is currently stored. unknown is (-1). |
| 1.3.6.1.4.1.1347.43.20.3.1.7 | ColumnkcprtMacroDataAttribute | read-only | mandatory | 'notRegistered' means this resource is existing on the device but it is not available for the printer. For example, macro on the IC card that is inserted into … |
| 1.3.6.1.4.1.1347.43.20.4 | TablekcprtHostDataTable | not-accessible | mandatory | This table contains information about the host data. Note that 'Host data' does not mean the job itself. |
| 1.3.6.1.4.1.1347.43.20.4.1 | RowkcprtHostDataEntry | not-accessible | mandatory | A list of entries that are corresponding each information of the host data. |
| 1.3.6.1.4.1.1347.43.20.4.1.1 | ColumnkcprtHostDataIndex | not-accessible | mandatory | A unique value corresponding to each information of the host data. The assigment will change in some case. |
| 1.3.6.1.4.1.1347.43.20.4.1.2 | ColumnkcprtHostDataName | read-only | mandatory | The name that is used for descriminating each host data. |
| 1.3.6.1.4.1.1347.43.20.4.1.3 | ColumnkcprtHostDataLocation | read-only | mandatory | The value of kcprtMemoryDeviceIndex that is corresponding to the device in which this host data is stored. If the device is unknown, the value is -1. |
| 1.3.6.1.4.1.1347.43.20.4.1.4 | ColumnkcprtHostDataAttribute | read-only | mandatory | Basically, the value is always 'registered'. |
| 1.3.6.1.4.1.1347.43.20.5 | TablekcprtProgramDataTable | not-accessible | mandatory | This table contains information about the program data. The program data is a kind of emulation and a Prescribe command, not a macro. |
| 1.3.6.1.4.1.1347.43.20.5.1 | RowkcprtProgramDataEntry | not-accessible | mandatory | A list of entries that are corresponding to each information of the program data. |
| 1.3.6.1.4.1.1347.43.20.5.1.1 | ColumnkcprtProgramDataIndex | not-accessible | mandatory | A unique value corresponding to each program data. This assigment may change in some case. |
| 1.3.6.1.4.1.1347.43.20.5.1.2 | ColumnkcprtProgramDataName | read-only | mandatory | |
| 1.3.6.1.4.1.1347.43.20.5.1.3 | ColumnkcprtProgramDataType | read-only | mandatory | |
| 1.3.6.1.4.1.1347.43.20.5.1.4 | ColumnkcprtProgramDataLocation | read-only | mandatory | The value of kcprtMemoryDeviceIndex corresponding to the device in which this program data is stored. If the device is unknown, the value is (-1). |
| 1.3.6.1.4.1.1347.43.20.5.1.5 | ColumnkcprtProgramDataAttribute | read-only | mandatory | 'running' means the program is running. |
| 1.3.6.1.4.1.1347.43.20.6 | TablekcprtMessageDataTable | not-accessible | mandatory | This is a bunch of message that is handled as one of the flont panel language by the printer. |
| 1.3.6.1.4.1.1347.43.20.6.1 | RowkcprtMessageDataEntry | not-accessible | mandatory | A list of entries that are corresponding to each information of the message data. |
| 1.3.6.1.4.1.1347.43.20.6.1.1 | ColumnkcprtMessageDataIndex | not-accessible | mandatory | The index vaule that is assigned to each front panel language. |
| 1.3.6.1.4.1.1347.43.20.6.1.2 | ColumnkcprtMessageDataName | read-only | mandatory | The name of the message data block. |
| 1.3.6.1.4.1.1347.43.20.6.1.3 | ColumnkcprtMessageDataLocation | read-only | mandatory | The value of kcprtMemoryDeviceIndex corresponding to the device in which this message data is stored. If the device is unknown, the value is -1. |
| 1.3.6.1.4.1.1347.43.20.6.1.4 | ColumnkcprtMessageDataAttribute | read-only | mandatory | Always 'registered' in the current products. |
| 1.3.6.1.4.1.1347.43.20.7 | TablekcprtFontDataTable | not-accessible | mandatory | This table contains font information. |
| 1.3.6.1.4.1.1347.43.20.7.1 | RowkcprtFontDataEntry | not-accessible | mandatory | A list of entries that are corresponding each information of the font. |
| 1.3.6.1.4.1.1347.43.20.7.1.1 | ColumnkcprtFontDataIndex | not-accessible | mandatory | A unique value corresponding to each font data. The assignment may change in some case. |
| 1.3.6.1.4.1.1347.43.20.7.1.2 | ColumnkcprtTypeFaceName | read-only | mandatory | The value will be NULL if no name has been assigned. |
| 1.3.6.1.4.1.1347.43.20.7.1.3 | ColumnkcprtFontID | read-only | mandatory | This value will be -1 if no ID has been assigned. |
| 1.3.6.1.4.1.1347.43.20.7.1.4 | ColumnkcprtFontType | read-only | mandatory | |
| 1.3.6.1.4.1.1347.43.20.7.1.5 | ColumnkcprtFontLocation | read-only | mandatory | The value of kcprtMemoryDeviceIndex corresponding to the device on which this font is stored. If it is unknown, the value is -1. |
| 1.3.6.1.4.1.1347.43.20.7.1.6 | ColumnkcprtFontAttribute | read-only | mandatory | In the current printer, this value is always 'registered'. |
| 1.3.6.1.4.1.1347.43.20.8 | TablekcprtFileStorageTable | not-accessible | mandatory | This table contains FILE storage information. 'File' is an resource object that is used by PCL and/or KPDL. Sometimes it may be the dowloaded font. However, th… |
| 1.3.6.1.4.1.1347.43.20.8.1 | RowkcprtFileStorageEntry | not-accessible | mandatory | A list of entries that are corresponding each information of the file storage. Basically the storage is an area located on the printer's hard disk. |
| 1.3.6.1.4.1.1347.43.20.8.1.1 | ColumnkcprtFileStorageIndex | not-accessible | mandatory | A unique value corresponding to each file storage information. The assignment may change in some case. |
| 1.3.6.1.4.1.1347.43.20.8.1.2 | ColumnkcprtFileStorageLimitSize | read-only | mandatory | The threshold value of the maximum storage size. The unit is specified by kcprtFileStorageUnit object. Value (-1) means 'unknown'. Note that this size does not… |
| 1.3.6.1.4.1.1347.43.20.8.1.3 | ColumnkcprtFileStorageUsedSize | read-only | mandatory | The used size of the file storage area. The unit is specified by kcprtFileStorageUnit object. Value (-1) means 'unknown'. |
| 1.3.6.1.4.1.1347.43.20.8.1.4 | ColumnkcprtFileStorageUnit | read-only | mandatory | This object shows the unit for both kcprtFileStorageLimitSize and kcprtFileStorageUsedSize. The value (1024) means the unit is 1Kbytes. In this case, the used … |
| 1.3.6.1.4.1.1347.43.20.8.1.5 | ColumnkcprtFileStorageCounter | read-only | mandatory | Note that this object does not show the number of the entry in this table. Each time when some change has happened on this table, this counter will be increase… |
| 1.3.6.1.4.1.1347.43.20.9 | TablekcprtFileTable | not-accessible | mandatory | This table contains FILE object information. 'File' is an resource object that is used by PCL and/or KPDL. Sometimes it may be the dowloaded font. However, the… |
| 1.3.6.1.4.1.1347.43.20.9.1 | RowkcprtFileEntry | not-accessible | mandatory | A list of entries that are corresponding each information of the file object. |
| 1.3.6.1.4.1.1347.43.20.9.1.1 | ColumnkcprtFileIndex | read-only | mandatory | An unique value assigned by the printer system to identify each file object. This assignment may be changed while running cycle. |
| 1.3.6.1.4.1.1347.43.20.9.1.2 | ColumnkcprtFileName | read-only | mandatory | This object gives the full-path name of the file object. If the file was made by KPDL interpreter, the name will be 'KPDL\filename'. If the file was made by PC… |
| 1.3.6.1.4.1.1347.43.20.9.1.3 | ColumnkcprtFileSize | read-only | mandatory | The file size in byte. |
| 1.3.6.1.4.1.1347.43.20.10 | TablekcprtSJobStorageTable | not-accessible | mandatory | This table gives information for the logical storage that contains Saved Job files. See description of kcprtSJobTable for the detail of Saved Job. |
| 1.3.6.1.4.1.1347.43.20.10.1 | RowkcprtSJobStorageEntry | not-accessible | mandatory | The entry may be changed while running-cycle. |
| 1.3.6.1.4.1.1347.43.20.10.1.1 | ColumnkcprtSJobStorageIndex | not-accessible | mandatory | A unique number that is assigned each SJob storage. This assignment will not change while running-cycle. The table with index(1) contains volatile SJobs only. … |
| 1.3.6.1.4.1.1347.43.20.10.1.2 | ColumnkcprtSJobStorageLimitSize | read-only | mandatory | This logical storage's threshold size. Printer system will not save new SJob or delete the oldest SJob if the kcprtSJobStorageUsedSize is going to exceed this … |
| 1.3.6.1.4.1.1347.43.20.10.1.3 | ColumnkcprtSJobStorageUsedSize | read-only | mandatory | This logical storage's used size. The unit is specified by kcprtSJobStorageUnit. The value (-1) means 'unknown'. |
| 1.3.6.1.4.1.1347.43.20.10.1.4 | ColumnkcprtSJobStorageUnit | read-only | mandatory | This object shows the unit size. For example, value(1024) means that one unit is 1024 bytes (1KBytes). |
| 1.3.6.1.4.1.1347.43.20.10.1.5 | ColumnkcprtSJobStorageStateCounter | read-only | mandatory | This counter will be increased when any change has happened on this SJob storage. For exmaple, this counter will be increased if new SJob is added onto this st… |
| 1.3.6.1.4.1.1347.43.20.10.1.6 | ColumnkcprtSJobStorageAttribute | read-only | mandatory | There are two type of SJob. One is 'volatile' and the other is 'nonVolatile'. The volatile job will be deleted by the printer system when new SJob is coming an… |
| 1.3.6.1.4.1.1347.43.20.11 | TablekcprtSJobTable | not-accessible | mandatory | This table contains information for each SJob file. 'SJob' means 'Saved Job'. This is actually a mass of video images that are about to be passed to printer's … |
| 1.3.6.1.4.1.1347.43.20.11.1 | RowkcprtSJobEntry | not-accessible | mandatory | |
| 1.3.6.1.4.1.1347.43.20.11.1.1 | ColumnkcprtSJobIndex | not-accessible | mandatory | A unique value assigned by the printer system to identify each SJob file. |
| 1.3.6.1.4.1.1347.43.20.11.1.2 | ColumnkcprtSjobID | read-only | mandatory | A unique ID that can be used to specify the required SJob file. This ID is assigned by the printer system. Note that this value is different from kcprtSJobInde… |
| 1.3.6.1.4.1.1347.43.20.11.1.3 | ColumnkcprtSJobName | read-only | mandatory | A string that can identify each SJob. This information will be assigned by the job sender. If the sender has not assigned any name, this value is NULL string. |
| 1.3.6.1.4.1.1347.43.20.11.1.4 | ColumnkcprtSJobOwner | read-only | mandatory | A string that can be used to identify the SJob's owner (sender). This string should be assigned by the job sender. If not, NULL string will be placed. |
| 1.3.6.1.4.1.1347.43.20.11.1.5 | ColumnkcprtSJobTime | read-only | mandatory | A string that can be used to recognize the Job submission time. This string should be assigned by the job sender. If not, NULL string will be applied. |
| 1.3.6.1.4.1.1347.43.20.11.1.6 | ColumnkcprtSJobPageNumber | read-only | mandatory | Total number of impressions that this SJob contains. |
| 1.3.6.1.4.1.1347.43.20.11.1.7 | ColumnkcprtSJobSize | read-only | mandatory | Total amount of SJob file. The unit it Byte. |
| 1.3.6.1.4.1.1347.43.20.11.1.8 | ColumnkcprtSJobStorageRef | read-only | mandatory | kcprtSJobStorageIndex value corresponding to each SJobStorage that contains this SJob file. |
| 1.3.6.1.4.1.1347.43.20.11.1.9 | ColumnkcprtSJobCopyCount | read-only | mandatory | Copy Count of SJob file. |
| 1.3.6.1.4.1.1347.43.20.11.1.10 | ColumnkcprtSJobBarcodePrintExistence | read-only | mandatory | |
| 1.3.6.1.4.1.1347.43.20.11.1.11 | ColumnkcprtSJobDuplexMode | read-only | mandatory | |
| 1.3.6.1.4.1.1347.43.20.11.1.12 | ColumnkcprtSJobOutputIndex | read-only | mandatory | |
| 1.3.6.1.4.1.1347.43.20.11.1.13 | ColumnkcprtSJobStaplePosition | read-only | mandatory | |
| 1.3.6.1.4.1.1347.43.20.11.1.14 | ColumnkcprtSJobBarcodePosition | read-only | mandatory | |
| 1.3.6.1.4.1.1347.43.20.11.1.15 | ColumnkcprtSJobStapleAndFoldCount | read-only | mandatory | |
| 1.3.6.1.4.1.1347.43.20.11.1.16 | ColumnkcprtSJobFoldMode | read-only | mandatory | |
| 1.3.6.1.4.1.1347.43.20.11.1.17 | ColumnkcprtSJobPunchMode | read-only | mandatory | |
| 1.3.6.1.4.1.1347.43.20.11.1.18 | ColumnkcprtSJobTransparencySeparationMode | read-only | mandatory | |
| 1.3.6.1.4.1.1347.43.20.11.1.19 | ColumnkcprtSJobTransparencySeparationInputIndex | read-only | mandatory | |
| 1.3.6.1.4.1.1347.43.20.11.1.20 | ColumnkcprtSJobRotatedCollationMode | read-only | mandatory | |
| 1.3.6.1.4.1.1347.43.20.11.1.21 | ColumnkcprtSJobBookletMode | read-only | mandatory | |
| 1.3.6.1.4.1.1347.43.20.11.1.22 | ColumnkcprtSJobJobOffsetMode | read-only | mandatory | |
| 1.3.6.1.4.1.1347.43.21 | NodekcprtMediaList | |||
| 1.3.6.1.4.1.1347.43.21.1 | TablekcprtMediaTable | not-accessible | mandatory | This table contains information of the media type. |
| 1.3.6.1.4.1.1347.43.21.1.1 | RowkcprtMediaEntry | not-accessible | mandatory | Information for the media list. |
| 1.3.6.1.4.1.1347.43.21.1.1.1 | ColumnkcprtMediaIndex | not-accessible | mandatory | The index that the printer assigns internally to identify the mdeia type. |
| 1.3.6.1.4.1.1347.43.21.1.1.2 | ColumnkcprtMediaName | read-write | mandatory | The fixed label to identify the each media type. |
| 1.3.6.1.4.1.1347.43.21.1.1.3 | ColumnkcprtMediaWeight | read-write | mandatory | Controlls media type. |
| 1.3.6.1.4.1.1347.43.21.1.1.4 | ColumnkcprtMediaFuserMode | read-write | mandatory | Configures fuser's temparature. |
| 1.3.6.1.4.1.1347.43.21.1.1.5 | ColumnkcprtMediaPathType | read-write | mandatory | Controls whether the duplexer can handle this media or not. |
| 1.3.6.1.4.1.1347.43.21.1.1.6 | ColumnkcprtMediaDensity | read-write | mandatory | Controls density. |
| 1.3.6.1.4.1.1347.43.21.1.1.7 | ColumnkcprtMediaManageLevel | read-only | mandatory | Manage media type level. |
| 1.3.6.1.4.1.1347.43.22 | NodekcprtMailBox | |||
| 1.3.6.1.4.1.1347.43.22.1 | TablekcprtMailBoxTable | not-accessible | mandatory | |
| 1.3.6.1.4.1.1347.43.22.1.1 | RowkcprtMailBoxEntry | not-accessible | mandatory | |
| 1.3.6.1.4.1.1347.43.22.1.1.1 | ColumnkcprtMailBoxIndex | not-accessible | mandatory | |
| 1.3.6.1.4.1.1347.43.22.1.1.2 | ColumnkcprtMailBoxDeviceIndex | read-only | mandatory | |
| 1.3.6.1.4.1.1347.43.22.1.1.3 | ColumnkcprtMailBoxStateCounter | read-only | mandatory | |
| 1.3.6.1.4.1.1347.43.22.1.1.4 | ColumnkcprtMailBoxUsedTrays | read-only | mandatory | |
| 1.3.6.1.4.1.1347.43.22.1.1.5 | ColumnkcprtMailBoxDocumentsNumber | read-only | mandatory | |
| 1.3.6.1.4.1.1347.43.22.1.1.6 | ColumnkcprtMailBoxPageNumber | read-only | mandatory | |
| 1.3.6.1.4.1.1347.43.22.1.1.7 | ColumnkcprtMailBoxUsedSize | read-only | mandatory | |
| 1.3.6.1.4.1.1347.43.22.1.1.8 | ColumnkcprtMailBoxLimitSize | read-write | mandatory | |
| 1.3.6.1.4.1.1347.43.22.1.1.9 | ColumnkcprtMailBoxMaxLimitSize | read-only | mandatory | |
| 1.3.6.1.4.1.1347.43.22.1.1.10 | ColumnkcprtMailBoxUnit | read-only | mandatory | |
| 1.3.6.1.4.1.1347.43.22.1.1.11 | ColumnkcprtMailBoxAliasCheck | read-write | mandatory | |
| 1.3.6.1.4.1.1347.43.22.2 | TablekcprtMailBoxTrayTable | not-accessible | mandatory | |
| 1.3.6.1.4.1.1347.43.22.2.1 | RowkcprtMailBoxTrayEntry | not-accessible | mandatory | |
| 1.3.6.1.4.1.1347.43.22.2.1.1 | ColumnkcprtMailBoxTrayIndex | not-accessible | mandatory | |
| 1.3.6.1.4.1.1347.43.22.2.1.2 | ColumnkcprtMailBoxTrayUsedFlag | read-only | mandatory | |
| 1.3.6.1.4.1.1347.43.22.2.1.3 | ColumnkcprtMailBoxTrayLabel | read-write | mandatory | |
| 1.3.6.1.4.1.1347.43.22.2.1.4 | ColumnkcprtMailBoxTrayLock | read-only | mandatory | |
| 1.3.6.1.4.1.1347.43.22.2.1.5 | ColumnkcprtMailBoxTrayDocumentsNumber | read-only | mandatory | |
| 1.3.6.1.4.1.1347.43.22.2.1.6 | ColumnkcprtMailBoxTrayPageNumber | read-only | mandatory | |
| 1.3.6.1.4.1.1347.43.22.2.1.7 | ColumnkcprtMailBoxTrayOccupiedSize | read-only | mandatory | |
| 1.3.6.1.4.1.1347.43.22.2.1.8 | ColumnkcprtMailBoxTraySharedSize | read-only | mandatory | |
| 1.3.6.1.4.1.1347.43.22.2.1.9 | ColumnkcprtMailBoxTrayErrorLogNumber | read-only | mandatory | |
| 1.3.6.1.4.1.1347.43.22.2.1.10 | ColumnkcprtMailBoxTrayPurgeDocuments | read-write | mandatory | |
| 1.3.6.1.4.1.1347.43.22.2.1.11 | ColumnkcprtMailBoxTrayReset | read-write | mandatory | |
| 1.3.6.1.4.1.1347.43.22.3 | TablekcprtTrayJobTable | not-accessible | mandatory | |
| 1.3.6.1.4.1.1347.43.22.3.1 | RowkcprtTrayJobEntry | not-accessible | mandatory | |
| 1.3.6.1.4.1.1347.43.22.3.1.1 | ColumnkcprtTrayJobIndex | not-accessible | mandatory | |
| 1.3.6.1.4.1.1347.43.22.3.1.2 | ColumnkcprtTrayJobID | read-only | mandatory | |
| 1.3.6.1.4.1.1347.43.22.3.1.3 | ColumnkcprtTrayJobName | read-only | mandatory | |
| 1.3.6.1.4.1.1347.43.22.3.1.4 | ColumnkcprtTrayJobOwner | read-only | mandatory | |
| 1.3.6.1.4.1.1347.43.22.3.1.5 | ColumnkcprtTrayJobTime | read-only | mandatory | |
| 1.3.6.1.4.1.1347.43.22.3.1.6 | ColumnkcprtTrayJobPageNumber | read-only | mandatory | |
| 1.3.6.1.4.1.1347.43.22.3.1.7 | ColumnkcprtTrayJobSize | read-only | mandatory | |
| 1.3.6.1.4.1.1347.43.22.3.1.8 | ColumnkcprtTrayJobStorageResult | read-only | mandatory | |
| 1.3.6.1.4.1.1347.43.23 | NodekcprtSubUnit | |||
| 1.3.6.1.4.1.1347.43.23.1 | TablekcprtSubUnitTable | not-accessible | mandatory | This table contains information of the sub unit. |
| 1.3.6.1.4.1.1347.43.23.1.1 | RowkcprtSubUnitEntry | not-accessible | mandatory | Information for the sub unit. |
| 1.3.6.1.4.1.1347.43.23.1.1.1 | ColumnkcprtSubUnitIndex | not-accessible | mandatory | A unique value assigned by the printer system to identify sub units. |
| 1.3.6.1.4.1.1347.43.23.1.1.2 | ColumnkcprtSubUnitModel | read-only | mandatory | The printer's sub unit name. |
| 1.3.6.1.4.1.1347.43.23.1.1.3 | ColumnkcprtSubUnitAbsoluteModel | read-only | mandatory | The printer's sub unit absolute name. |
| 1.3.6.1.4.1.1347.43.23.1.1.4 | ColumnkcprtSubUnitTableIndex | read-only | mandatory | The printer's sub unit table index. |
| 1.3.6.1.4.1.1347.43.23.1.1.5 | ColumnkcprtSubUnitObjectIndex | read-only | mandatory | The printer's sub unit object index. |
| 1.3.6.1.4.1.1347.43.24 | NodekcprtJob | |||
| 1.3.6.1.4.1.1347.43.24.1 | TablekcprtJobGeneralTable | not-accessible | mandatory | This table contains information of printer job. |
| 1.3.6.1.4.1.1347.43.24.1.1 | RowkcprtJobGeneralEntry | not-accessible | mandatory | Information for printer job. |
| 1.3.6.1.4.1.1347.43.24.1.1.1 | ColumnkcprtJobMaxEntryNumber | read-only | mandatory | Max job number on jmJobTable |
| 1.3.6.1.4.1.1347.43.24.1.1.2 | ColumnkcprtJobNewestJobIndex | read-only | mandatory | The newest job index of jmJobTable |
| 1.3.6.1.4.1.1347.43.24.1.1.3 | ColumnkcprtJobCancelByJobOwner | write-only | mandatory | Set jmJobOwner for cancel. |