Printer-MIB
257 objects
The MIB module for management of printers. Copyright (C) The Internet Society (2004). This version of this MIB module was published in RFC 3805. For full legal notices see the RFC itself.
Imported Objects
| HOST-RESOURCES-MIB | hrDeviceIndex hrStorageIndex |
| IANA-CHARSET-MIB | IANACharset |
| IANA-PRINTER-MIB | PrtAlertCodeTC PrtAlertGroupTC PrtAlertTrainingLevelTC PrtChannelTypeTC PrtConsoleColorTC PrtConsoleDisableTC PrtCoverStatusTC PrtGeneralResetTC PrtInputTypeTC PrtInterpreterLangFamilyTC PrtMarkerMarkTechTC PrtMarkerSuppliesTypeTC PrtMediaPathTypeTC PrtOutputTypeTC |
| IF-MIB | InterfaceIndexOrZero |
| SNMPv2-CONF | MODULE-COMPLIANCE NOTIFICATION-GROUP OBJECT-GROUP |
| SNMPv2-SMI | Counter32 Integer32 mib-2 MODULE-IDENTITY NOTIFICATION-TYPE OBJECT-IDENTITY OBJECT-TYPE TimeTicks |
| SNMPv2-TC | TEXTUAL-CONVENTION |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.2.1.43 | Identityprintmib | of | The MIB module for management of printers. Copyright (C) The Internet Society (2004). This version of this MIB module was published in RFC 3805. For full legal… | |
| 1.3.6.1.2.1.43.2 | NodeprtMIBConformance | |||
| 1.3.6.1.2.1.43.2.1 | ComplianceprtMIBCompliance | read-only | current | The compliance statement for agents that implement the printer MIB as defined by RFC 1759. |
| 1.3.6.1.2.1.43.2.2 | NodeprtMIBGroups | |||
| 1.3.6.1.2.1.43.2.2.1 | GroupprtGeneralGroup | current | The general printer group. | |
| 1.3.6.1.2.1.43.2.2.2 | GroupprtResponsiblePartyGroup | current | The responsible party group contains contact information for humans responsible for the printer. | |
| 1.3.6.1.2.1.43.2.2.3 | GroupprtInputGroup | current | The input group. | |
| 1.3.6.1.2.1.43.2.2.4 | GroupprtExtendedInputGroup | current | The extended input group. | |
| 1.3.6.1.2.1.43.2.2.5 | GroupprtInputMediaGroup | current | The input media group. | |
| 1.3.6.1.2.1.43.2.2.6 | GroupprtOutputGroup | current | The output group. | |
| 1.3.6.1.2.1.43.2.2.7 | GroupprtExtendedOutputGroup | current | The extended output group. | |
| 1.3.6.1.2.1.43.2.2.8 | GroupprtOutputDimensionsGroup | current | The output dimensions group | |
| 1.3.6.1.2.1.43.2.2.9 | GroupprtOutputFeaturesGroup | current | The output features group. | |
| 1.3.6.1.2.1.43.2.2.10 | GroupprtMarkerGroup | current | The marker group. | |
| 1.3.6.1.2.1.43.2.2.11 | GroupprtMarkerSuppliesGroup | current | The marker supplies group. | |
| 1.3.6.1.2.1.43.2.2.12 | GroupprtMarkerColorantGroup | current | The marker colorant group. | |
| 1.3.6.1.2.1.43.2.2.13 | GroupprtMediaPathGroup | current | The media path group. | |
| 1.3.6.1.2.1.43.2.2.14 | GroupprtChannelGroup | current | The channel group. | |
| 1.3.6.1.2.1.43.2.2.15 | GroupprtInterpreterGroup | current | The interpreter group. | |
| 1.3.6.1.2.1.43.2.2.16 | GroupprtConsoleGroup | current | The console group. | |
| 1.3.6.1.2.1.43.2.2.17 | GroupprtAlertTableGroup | current | The alert table group. | |
| 1.3.6.1.2.1.43.2.2.18 | GroupprtAlertTimeGroup | current | The alert time group. Implementation of prtAlertTime is strongly RECOMMENDED. | |
| 1.3.6.1.2.1.43.2.2.19 | GroupprtAuxiliarySheetGroup | current | The auxiliary sheet group. | |
| 1.3.6.1.2.1.43.2.2.20 | GroupprtInputSwitchingGroup | current | The input switching group. | |
| 1.3.6.1.2.1.43.2.2.21 | GroupprtGeneralV2Group | current | The general printer group with new v2 objects. | |
| 1.3.6.1.2.1.43.2.2.22 | GroupprtAlertTableV2Group | of | current | The alert table group with new v2 objects and prtAlertIndex changed to MAX-ACCESS of 'read-only' for inclusion in the trap bindings (as originally defined in R… |
| 1.3.6.1.2.1.43.2.2.23 | GroupprtChannelV2Group | current | The channel group with a new v2 object. | |
| 1.3.6.1.2.1.43.2.2.24 | GroupprtAlertTrapGroup | current | The alert trap group. | |
| 1.3.6.1.2.1.43.2.3 | ComplianceprtMIB2Compliance | read-only | current | The compliance statement for agents that implement the printer MIB V2. |
| 1.3.6.1.2.1.43.2.4 | NodeprtMIB2Groups | |||
| 1.3.6.1.2.1.43.5 | NodeprtGeneral | |||
| 1.3.6.1.2.1.43.5.1 | TableprtGeneralTable | not-accessible | current | A table of general information per printer. Objects in this table are defined in various places in the MIB, nearby the groups to which they apply. They are all… |
| 1.3.6.1.2.1.43.5.1.1 | RowprtGeneralEntry | not-accessible | current | An entry exists in this table for each device entry in the host resources MIB device table with a device type of 'printer'. NOTE: The above description has bee… |
| 1.3.6.1.2.1.43.5.1.1.1 | ColumnprtGeneralConfigChanges | read-only | current | Counts configuration changes within the printer. A configuration change is defined to be an action that results in a change to any MIB object other than those … |
| 1.3.6.1.2.1.43.5.1.1.2 | ColumnprtGeneralCurrentLocalization | read-write | current | The value of the prtLocalizationIndex corresponding to the current language, country, and character set to be used for localized string values that are identif… |
| 1.3.6.1.2.1.43.5.1.1.3 | ColumnprtGeneralReset | read-write | current | Setting this value to 'powerCycleReset', 'resetToNVRAM', or 'resetToFactoryDefaults' will result in the resetting of the printer. When read, this object will a… |
| 1.3.6.1.2.1.43.5.1.1.4 | ColumnprtGeneralCurrentOperator | read-write | current | The name of the person who is responsible for operating this printer. It is suggested that this string include information that would enable other humans to re… |
| 1.3.6.1.2.1.43.5.1.1.5 | ColumnprtGeneralServicePerson | read-write | current | The name of the person responsible for servicing this printer. It is suggested that this string include information that would enable other humans to reach the… |
| 1.3.6.1.2.1.43.5.1.1.6 | ColumnprtInputDefaultIndex | read-write | current | The value of prtInputIndex corresponding to the default input sub-unit: that is, this object selects the default source of input media. |
| 1.3.6.1.2.1.43.5.1.1.7 | ColumnprtOutputDefaultIndex | read-write | current | The value of prtOutputIndex corresponding to the default output sub-unit; that is, this object selects the default output destination. |
| 1.3.6.1.2.1.43.5.1.1.8 | ColumnprtMarkerDefaultIndex | read-write | current | The value of prtMarkerIndex corresponding to the default marker sub-unit; that is, this object selects the default marker. |
| 1.3.6.1.2.1.43.5.1.1.9 | ColumnprtMediaPathDefaultIndex | read-write | current | The value of prtMediaPathIndex corresponding to the default media path; that is, the selection of the default media path. |
| 1.3.6.1.2.1.43.5.1.1.10 | ColumnprtConsoleLocalization | read-write | current | The value of the prtLocalizationIndex corresponding to the language, country, and character set to be used for the console. This localization applies both to t… |
| 1.3.6.1.2.1.43.5.1.1.11 | ColumnprtConsoleNumberOfDisplayLines | read-only | current | The number of lines on the printer's physical display. This value is 0 if there are no lines on the physical display or if there is no physical display |
| 1.3.6.1.2.1.43.5.1.1.12 | ColumnprtConsoleNumberOfDisplayChars | read-only | current | The number of characters per line displayed on the physical display. This value is 0 if there are no lines on the physical display or if there is no physical d… |
| 1.3.6.1.2.1.43.5.1.1.13 | ColumnprtConsoleDisable | read-write | current | This value indicates how input is (or is not) accepted from the operator console. NOTE: The above description has been modified from RFC 1759 for clarification. |
| 1.3.6.1.2.1.43.5.1.1.14 | ColumnprtAuxiliarySheetStartupPage | read-write | current | Used to enable or disable printing a startup page. If enabled, a startup page will be printed shortly after power-up, when the device is ready. Typical startup… |
| 1.3.6.1.2.1.43.5.1.1.15 | ColumnprtAuxiliarySheetBannerPage | read-write | current | Used to enable or disable printing banner pages at the beginning of jobs. This is a master switch which applies to all jobs, regardless of interpreter. |
| 1.3.6.1.2.1.43.5.1.1.16 | ColumnprtGeneralPrinterName | read-write | current | An administrator-specified name for this printer. Depending upon implementation of this printer, the value of this object may or may not be same as the value f… |
| 1.3.6.1.2.1.43.5.1.1.17 | ColumnprtGeneralSerialNumber | read-write | current | A recorded serial number for this device that indexes some type device catalog or inventory. This value is usually set by the device manufacturer but the MIB s… |
| 1.3.6.1.2.1.43.5.1.1.18 | ColumnprtAlertCriticalEvents | read-only | current | A running counter of the number of critical alert events that have been recorded in the alert table. The value of this object is RESET in the event of a power … |
| 1.3.6.1.2.1.43.5.1.1.19 | ColumnprtAlertAllEvents | read-only | current | A running counter of the total number of alert event entries (critical and non-critical) that have been recorded in the alert table |
| 1.3.6.1.2.1.43.5.2 | TableprtStorageRefTable | not-accessible | current | This table defines which printer, amongst multiple printers serviced by one agent, owns which storage units. NOTE: The above description has been modified from… |
| 1.3.6.1.2.1.43.5.2.1 | RowprtStorageRefEntry | not-accessible | current | This table will have an entry for each entry in the Host Resources MIB storage table that represents storage associated with a printer managed by this agent. N… |
| 1.3.6.1.2.1.43.5.2.1.1 | ColumnprtStorageRefSeqNumber | not-accessible | current | This value will be unique amongst all entries with a common value of hrStorageIndex. This object allows a storage entry to point to the multiple printer device… |
| 1.3.6.1.2.1.43.5.2.1.2 | ColumnprtStorageRefIndex | read-only | current | The value of the hrDeviceIndex of the printer device that this storageEntry is associated with. |
| 1.3.6.1.2.1.43.5.3 | TableprtDeviceRefTable | not-accessible | current | This table defines which printer, amongst multiple printers serviced by one agent, is associated with which devices. NOTE: The above description has been modif… |
| 1.3.6.1.2.1.43.5.3.1 | RowprtDeviceRefEntry | not-accessible | current | This table will have an entry for each entry in the Host Resources MIB device table that represents a device associated with a printer managed by this agent. N… |
| 1.3.6.1.2.1.43.5.3.1.1 | ColumnprtDeviceRefSeqNumber | not-accessible | current | This value will be unique amongst all entries with a common value of hrDeviceIndex. This object allows a device entry to point to the multiple printer devices … |
| 1.3.6.1.2.1.43.5.3.1.2 | ColumnprtDeviceRefIndex | read-only | current | The value of the hrDeviceIndex of the printer device that this deviceEntry is associated with. |
| 1.3.6.1.2.1.43.6 | NodeprtCover | |||
| 1.3.6.1.2.1.43.6.1 | TableprtCoverTable | not-accessible | current | A table of the covers and interlocks of the printer. |
| 1.3.6.1.2.1.43.6.1.1 | RowprtCoverEntry | not-accessible | current | Information about a cover or interlock. Entries may exist in the table for each device index with a device type of 'printer'. NOTE: The above description has b… |
| 1.3.6.1.2.1.43.6.1.1.1 | ColumnprtCoverIndex | not-accessible | current | A unique value used by the printer to identify this Cover sub unit. Although these values may change due to a major reconfiguration of the device (e.g., the ad… |
| 1.3.6.1.2.1.43.6.1.1.2 | ColumnprtCoverDescription | read-only | current | The manufacturer provided cover sub-mechanism name in the localization specified by prtGeneralCurrentLocalization. |
| 1.3.6.1.2.1.43.6.1.1.3 | ColumnprtCoverStatus | read-only | current | The status of this cover sub-unit. |
| 1.3.6.1.2.1.43.7 | NodeprtLocalization | |||
| 1.3.6.1.2.1.43.7.1 | TableprtLocalizationTable | not-accessible | current | The available localizations in this printer. |
| 1.3.6.1.2.1.43.7.1.1 | RowprtLocalizationEntry | not-accessible | current | A description of a localization. Entries may exist in the table for each device index with a device type of 'printer'. NOTE: The above description has been mod… |
| 1.3.6.1.2.1.43.7.1.1.1 | ColumnprtLocalizationIndex | not-accessible | current | A unique value used by the printer to identify this localization entry. Although these values may change due to a major reconfiguration of the device (e.g., th… |
| 1.3.6.1.2.1.43.7.1.1.2 | ColumnprtLocalizationLanguage | read-only | current | A two character language code from ISO 639. Examples en, es, fr, de. NOTE: These examples were shown as upper case in RFC 1759 and are now shown as lower case … |
| 1.3.6.1.2.1.43.7.1.1.3 | ColumnprtLocalizationCountry | read-only | current | A two character country code from ISO 3166, a blank string (two space characters) shall indicate that the country is not defined. Examples: US, GB, FR, DE, ... |
| 1.3.6.1.2.1.43.7.1.1.4 | ColumnprtLocalizationCharacterSet | read-only | current | The coded character set used for this localization. |
| 1.3.6.1.2.1.43.8 | NodeprtInput | |||
| 1.3.6.1.2.1.43.8.2 | TableprtInputTable | not-accessible | current | A table of the devices capable of providing media for input to the printing process. |
| 1.3.6.1.2.1.43.8.2.1 | RowprtInputEntry | not-accessible | current | Attributes of a device capable of providing media for input to the printing process. Entries may exist in the table for each device index with a device type of… |
| 1.3.6.1.2.1.43.8.2.1.1 | ColumnprtInputIndex | not-accessible | current | A unique value used by the printer to identify this input sub-unit. Although these values may change due to a major reconfiguration of the device (e.g., the ad… |
| 1.3.6.1.2.1.43.8.2.1.2 | ColumnprtInputType | read-only | current | The type of technology (discriminated primarily according to feeder mechanism type) employed by the input sub-unit. Note, the Input Class provides for a descri… |
| 1.3.6.1.2.1.43.8.2.1.3 | ColumnprtInputDimUnit | read-only | current | The unit of measurement for use calculating and relaying dimensional values for this input sub-unit. |
| 1.3.6.1.2.1.43.8.2.1.4 | ColumnprtInputMediaDimFeedDirDeclared | read-write | current | This object provides the value of the declared dimension, in the feed direction, of the media that is (or, if empty, was or will be) in this input sub-unit. Th… |
| 1.3.6.1.2.1.43.8.2.1.5 | ColumnprtInputMediaDimXFeedDirDeclared | read-write | current | This object provides the value of the declared dimension, in the cross feed direction, of the media that is (or, if empty, was or will be) in this input sub-un… |
| 1.3.6.1.2.1.43.8.2.1.6 | ColumnprtInputMediaDimFeedDirChosen | read-only | current | The printer will act as if media of the chosen dimension (in the feed direction) is present in this input source. Note that this value will be used even if the… |
| 1.3.6.1.2.1.43.8.2.1.7 | ColumnprtInputMediaDimXFeedDirChosen | read-only | current | The printer will act as if media of the chosen dimension (in the cross feed direction) is present in this input source. Note that this value will be used even … |
| 1.3.6.1.2.1.43.8.2.1.8 | ColumnprtInputCapacityUnit | read-only | current | The unit of measurement for use in calculating and relaying capacity values for this input sub-unit. |
| 1.3.6.1.2.1.43.8.2.1.9 | ColumnprtInputMaxCapacity | read-write | current | The maximum capacity of the input sub-unit in input sub-unit capacity units (PrtCapacityUnitTC). There is no convention associated with the media itself so thi… |
| 1.3.6.1.2.1.43.8.2.1.10 | ColumnprtInputCurrentLevel | read-write | current | The current capacity of the input sub-unit in input sub-unit capacity units (PrtCapacityUnitTC). If this input sub-unit can reliably sense this value, the valu… |
| 1.3.6.1.2.1.43.8.2.1.11 | ColumnprtInputStatus | read-only | current | The current status of this input sub-unit. |
| 1.3.6.1.2.1.43.8.2.1.12 | ColumnprtInputMediaName | read-write | current | A description of the media contained in this input sub-unit; This description is to be used by a client to format and Localize a string for display to a human … |
| 1.3.6.1.2.1.43.8.2.1.13 | ColumnprtInputName | read-write | current | The name assigned to this input sub-unit. |
| 1.3.6.1.2.1.43.8.2.1.14 | ColumnprtInputVendorName | read-only | current | The vendor name of this input sub-unit. |
| 1.3.6.1.2.1.43.8.2.1.15 | ColumnprtInputModel | read-only | current | The model name of this input sub-unit. |
| 1.3.6.1.2.1.43.8.2.1.16 | ColumnprtInputVersion | read-only | current | The version of this input sub-unit. |
| 1.3.6.1.2.1.43.8.2.1.17 | ColumnprtInputSerialNumber | read-only | current | The serial number assigned to this input sub-unit. |
| 1.3.6.1.2.1.43.8.2.1.18 | ColumnprtInputDescription | read-only | current | A free-form text description of this input sub-unit in the localization specified by prtGeneralCurrentLocalization. |
| 1.3.6.1.2.1.43.8.2.1.19 | ColumnprtInputSecurity | read-write | current | Indicates if this input sub-unit has some security associated with it. |
| 1.3.6.1.2.1.43.8.2.1.20 | ColumnprtInputMediaWeight | read-write | current | The weight of the medium associated with this input sub-unit in grams / per meter squared. The value (-2) means unknown. |
| 1.3.6.1.2.1.43.8.2.1.21 | ColumnprtInputMediaType | read-write | current | The name of the type of medium associated with this input sub unit. This name need not be processed by the printer; it might simply be displayed to an operator… |
| 1.3.6.1.2.1.43.8.2.1.22 | ColumnprtInputMediaColor | read-write | current | The name of the color of the medium associated with this input sub-unit using standardized string values. NOTE: The above description has been modified from RF… |
| 1.3.6.1.2.1.43.8.2.1.23 | ColumnprtInputMediaFormParts | read-write | current | The number of parts associated with the medium associated with this input sub-unit if the medium is a multi-part form. The value (-1) means other and specifica… |
| 1.3.6.1.2.1.43.8.2.1.24 | ColumnprtInputMediaLoadTimeout | read-write | current | When the printer is not able to print due to a subunit being empty or the requested media must be manually loaded, the printer will wait for the duration (in s… |
| 1.3.6.1.2.1.43.8.2.1.25 | ColumnprtInputNextIndex | read-write | current | The value of prtInputIndex corresponding to the input subunit which will be used when this input subunit is emptied and the time-out specified by prtInputMedia… |
| 1.3.6.1.2.1.43.9 | NodeprtOutput | |||
| 1.3.6.1.2.1.43.9.2 | TableprtOutputTable | not-accessible | current | A table of the devices capable of receiving media delivered from the printing process. |
| 1.3.6.1.2.1.43.9.2.1 | RowprtOutputEntry | not-accessible | current | Attributes of a device capable of receiving media delivered from the printing process. Entries may exist in the table for each device index with a device type … |
| 1.3.6.1.2.1.43.9.2.1.1 | ColumnprtOutputIndex | not-accessible | current | A unique value used by this printer to identify this output sub-unit. Although these values may change due to a major reconfiguration of the sub-unit (e.g., th… |
| 1.3.6.1.2.1.43.9.2.1.2 | ColumnprtOutputType | read-only | current | The type of technology supported by this output sub-unit. |
| 1.3.6.1.2.1.43.9.2.1.3 | ColumnprtOutputCapacityUnit | read-only | current | The unit of measurement for use in calculating and relaying capacity values for this output sub-unit. |
| 1.3.6.1.2.1.43.9.2.1.4 | ColumnprtOutputMaxCapacity | read-write | current | The maximum capacity of this output sub-unit in output sub- unit capacity units (PrtCapacityUnitTC). There is no convention associated with the media itself so… |
| 1.3.6.1.2.1.43.9.2.1.5 | ColumnprtOutputRemainingCapacity | read-write | current | The remaining capacity of the possible output sub-unit capacity in output sub-unit capacity units (PrtCapacityUnitTC)of this output sub-unit. If this output su… |
| 1.3.6.1.2.1.43.9.2.1.6 | ColumnprtOutputStatus | read-only | current | The current status of this output sub-unit. |
| 1.3.6.1.2.1.43.9.2.1.7 | ColumnprtOutputName | read-write | current | The name assigned to this output sub-unit. |
| 1.3.6.1.2.1.43.9.2.1.8 | ColumnprtOutputVendorName | read-only | current | The vendor name of this output sub-unit. |
| 1.3.6.1.2.1.43.9.2.1.9 | ColumnprtOutputModel | read-only | current | The model name assigned to this output sub-unit. NOTE: The above description has been modified from RFC 1759 for clarification. |
| 1.3.6.1.2.1.43.9.2.1.10 | ColumnprtOutputVersion | read-only | current | The version of this output sub-unit. |
| 1.3.6.1.2.1.43.9.2.1.11 | ColumnprtOutputSerialNumber | read-only | current | The serial number assigned to this output sub-unit. |
| 1.3.6.1.2.1.43.9.2.1.12 | ColumnprtOutputDescription | read-only | current | A free-form text description of this output sub-unit in the localization specified by prtGeneralCurrentLocalization. |
| 1.3.6.1.2.1.43.9.2.1.13 | ColumnprtOutputSecurity | read-write | current | Indicates if this output sub-unit has some security associated with it and if that security is enabled or not. |
| 1.3.6.1.2.1.43.9.2.1.14 | ColumnprtOutputDimUnit | read-only | current | The unit of measurement for use in calculating and relaying dimensional values for this output sub-unit. |
| 1.3.6.1.2.1.43.9.2.1.15 | ColumnprtOutputMaxDimFeedDir | read-write | current | The maximum dimensions supported by this output sub-unit for measurements taken parallel relative to the feed direction associated with that sub-unit in output… |
| 1.3.6.1.2.1.43.9.2.1.16 | ColumnprtOutputMaxDimXFeedDir | read-write | current | The maximum dimensions supported by this output sub-unit for measurements taken ninety degrees relative to the feed direction associated with that sub-unit in … |
| 1.3.6.1.2.1.43.9.2.1.17 | ColumnprtOutputMinDimFeedDir | read-write | current | The minimum dimensions supported by this output sub-unit for measurements taken parallel relative to the feed direction associated with that sub-unit in output… |
| 1.3.6.1.2.1.43.9.2.1.18 | ColumnprtOutputMinDimXFeedDir | read-write | current | The minimum dimensions supported by this output sub-unit for measurements taken ninety degrees relative to the feed direction associated with that sub-unit in … |
| 1.3.6.1.2.1.43.9.2.1.19 | ColumnprtOutputStackingOrder | read-write | current | The current state of the stacking order for the associated output sub-unit. 'FirstToLast' means that as pages are output the front of the next page is placed a… |
| 1.3.6.1.2.1.43.9.2.1.20 | ColumnprtOutputPageDeliveryOrientation | read-write | current | The reading surface that will be 'up' when pages are delivered to the associated output sub-unit. Values are faceUp and faceDown. (Note: interpretation of thes… |
| 1.3.6.1.2.1.43.9.2.1.21 | ColumnprtOutputBursting | read-write | current | This object indicates that the outputting sub-unit supports bursting, and if so, whether the feature is enabled. Bursting is the process by which continuous me… |
| 1.3.6.1.2.1.43.9.2.1.22 | ColumnprtOutputDecollating | read-write | current | This object indicates that the output supports decollating, and if so, whether the feature is enabled. Decollating is the process by which the individual parts… |
| 1.3.6.1.2.1.43.9.2.1.23 | ColumnprtOutputPageCollated | read-write | current | This object indicates that the output sub-unit supports page collation, and if so, whether the feature is enabled. See RFC 3805 Appendix A, Glossary Of Terms, … |
| 1.3.6.1.2.1.43.9.2.1.24 | ColumnprtOutputOffsetStacking | read-write | current | This object indicates that the output supports offset stacking,and if so, whether the feature is enabled. See RFC 3805 Appendix A, Glossary Of Terms, for how O… |
| 1.3.6.1.2.1.43.10 | NodeprtMarker | |||
| 1.3.6.1.2.1.43.10.2 | TableprtMarkerTable | not-accessible | current | The marker table provides a description of each marker sub-unit contained within the printer. NOTE: The above description has been modified from RFC 1759 for c… |
| 1.3.6.1.2.1.43.10.2.1 | RowprtMarkerEntry | not-accessible | current | Entries in this table define the characteristics and status of each marker sub-unit in the printer. NOTE: The above description has been modified from RFC 1759… |
| 1.3.6.1.2.1.43.10.2.1.1 | ColumnprtMarkerIndex | not-accessible | current | A unique value used by the printer to identify this marking SubUnit. Although these values may change due to a major reconfiguration of the device (e.g., the a… |
| 1.3.6.1.2.1.43.10.2.1.2 | ColumnprtMarkerMarkTech | read-only | current | The type of marking technology used for this marking sub-unit. |
| 1.3.6.1.2.1.43.10.2.1.3 | ColumnprtMarkerCounterUnit | read-only | current | The unit that will be used by the printer when reporting counter values for this marking sub-unit. The time units of measure are provided for a device like a s… |
| 1.3.6.1.2.1.43.10.2.1.4 | ColumnprtMarkerLifeCount | read-only | current | The count of the number of units of measure counted during the life of printer using units of measure as specified by prtMarkerCounterUnit. Note: This object s… |
| 1.3.6.1.2.1.43.10.2.1.5 | ColumnprtMarkerPowerOnCount | read-only | current | The count of the number of units of measure counted since the equipment was most recently powered on using units of measure as specified by prtMarkerCounterUni… |
| 1.3.6.1.2.1.43.10.2.1.6 | ColumnprtMarkerProcessColorants | read-only | current | The number of process colors supported by this marker. A process color of 1 implies monochrome. The value of this object and prtMarkerSpotColorants cannot both… |
| 1.3.6.1.2.1.43.10.2.1.7 | ColumnprtMarkerSpotColorants | read-only | current | The number of spot colors supported by this marker. The value of this object and prtMarkerProcessColorants cannot both be 0. Must be 0 or greater. NOTE: The ab… |
| 1.3.6.1.2.1.43.10.2.1.8 | ColumnprtMarkerAddressabilityUnit | read-only | current | The unit of measure of distances, as applied to the marker's resolution. NOTE: The above description has been modified from RFC 1759 for clarification. |
| 1.3.6.1.2.1.43.10.2.1.9 | ColumnprtMarkerAddressabilityFeedDir | read-only | current | The maximum number of addressable marking positions in the feed direction per 10000 units of measure specified by prtMarkerAddressabilityUnit. A value of (-1) … |
| 1.3.6.1.2.1.43.10.2.1.10 | ColumnprtMarkerAddressabilityXFeedDir | read-only | current | The maximum number of addressable marking positions in the cross feed direction in 10000 units of measure specified by prtMarkerAddressabilityUnit. A value of … |
| 1.3.6.1.2.1.43.10.2.1.11 | ColumnprtMarkerNorthMargin | read-only | current | The margin, in units identified by prtMarkerAddressabilityUnit, from the leading edge of the medium as the medium flows through the marking engine with the sid… |
| 1.3.6.1.2.1.43.10.2.1.12 | ColumnprtMarkerSouthMargin | read-only | current | The margin from the South edge (see prtMarkerNorthMargin) of the medium in units identified by prtMarkerAddressabilityUnit. Printing within the area bounded by… |
| 1.3.6.1.2.1.43.10.2.1.13 | ColumnprtMarkerWestMargin | read-only | current | The margin from the West edge (see prtMarkerNorthMargin) of the medium in units identified by prtMarkerAddressabilityUnit. Printing within the area bounded by … |
| 1.3.6.1.2.1.43.10.2.1.14 | ColumnprtMarkerEastMargin | read-only | current | The margin from the East edge (see prtMarkerNorthMargin) of the medium in units identified by prtMarkerAddressabilityUnit. Printing within the area bounded by … |
| 1.3.6.1.2.1.43.10.2.1.15 | ColumnprtMarkerStatus | read-only | current | The current status of this marker sub-unit. |
| 1.3.6.1.2.1.43.11 | NodeprtMarkerSupplies | |||
| 1.3.6.1.2.1.43.11.1 | TableprtMarkerSuppliesTable | not-accessible | current | A table of the marker supplies available on this printer. |
| 1.3.6.1.2.1.43.11.1.1 | RowprtMarkerSuppliesEntry | not-accessible | current | Attributes of a marker supply. Entries may exist in the table for each device index with a device type of 'printer'. NOTE: The above description has been modif… |
| 1.3.6.1.2.1.43.11.1.1.1 | ColumnprtMarkerSuppliesIndex | not-accessible | current | A unique value used by the printer to identify this marker supply. Although these values may change due to a major supplies to the printer), values SHOULD rema… |
| 1.3.6.1.2.1.43.11.1.1.2 | ColumnprtMarkerSuppliesMarkerIndex | read-only | current | The value of prtMarkerIndex corresponding to the marking sub unit with which this marker supply sub-unit is associated. |
| 1.3.6.1.2.1.43.11.1.1.3 | ColumnprtMarkerSuppliesColorantIndex | read-only | current | The value of prtMarkerColorantIndex corresponding to the colorant with which this marker supply sub-unit is associated. This value shall be 0 if there is no co… |
| 1.3.6.1.2.1.43.11.1.1.4 | ColumnprtMarkerSuppliesClass | read-only | current | Indicates whether this supply entity represents a supply that is consumed or a receptacle that is filled. NOTE: The above description has been modified from RF… |
| 1.3.6.1.2.1.43.11.1.1.5 | ColumnprtMarkerSuppliesType | read-only | current | The type of this supply. |
| 1.3.6.1.2.1.43.11.1.1.6 | ColumnprtMarkerSuppliesDescription | read-only | current | The description of this supply container/receptacle in the localization specified by prtGeneralCurrentLocalization. |
| 1.3.6.1.2.1.43.11.1.1.7 | ColumnprtMarkerSuppliesSupplyUnit | read-only | current | Unit of measure of this marker supply container/receptacle. NOTE: The above description has been modified from RFC 1759 for clarification. |
| 1.3.6.1.2.1.43.11.1.1.8 | ColumnprtMarkerSuppliesMaxCapacity | read-write | current | The maximum capacity of this supply container/receptacle expressed in prtMarkerSuppliesSupplyUnit. If this supply container/receptacle can reliably sense this … |
| 1.3.6.1.2.1.43.11.1.1.9 | ColumnprtMarkerSuppliesLevel | read-write | current | The current level if this supply is a container; the remaining space if this supply is a receptacle. If this supply container/receptacle can reliably sense thi… |
| 1.3.6.1.2.1.43.12 | NodeprtMarkerColorant | |||
| 1.3.6.1.2.1.43.12.1 | TableprtMarkerColorantTable | not-accessible | current | A table of all of the colorants available on the printer. |
| 1.3.6.1.2.1.43.12.1.1 | RowprtMarkerColorantEntry | not-accessible | current | Attributes of a colorant available on the printer. Entries may exist in the table for each device index with a device type of 'printer'. NOTE: The above descri… |
| 1.3.6.1.2.1.43.12.1.1.1 | ColumnprtMarkerColorantIndex | not-accessible | current | A unique value used by the printer to identify this colorant. Although these values may change due to a major reconfiguration of the device (e.g., the addition… |
| 1.3.6.1.2.1.43.12.1.1.2 | ColumnprtMarkerColorantMarkerIndex | read-only | current | The value of prtMarkerIndex corresponding to the marker sub unit with which this colorant entry is associated. |
| 1.3.6.1.2.1.43.12.1.1.3 | ColumnprtMarkerColorantRole | read-only | current | The role played by this colorant. |
| 1.3.6.1.2.1.43.12.1.1.4 | ColumnprtMarkerColorantValue | read-only | current | The name of the color of this colorant using standardized string names from ISO 10175 (DPA) and ISO 10180 (SPDL) such as: other unknown white red green blue cy… |
| 1.3.6.1.2.1.43.12.1.1.5 | ColumnprtMarkerColorantTonality | read-only | current | The distinct levels of tonality realizable by a marking sub unit when using this colorant. This value does not include the number of levels of tonal difference… |
| 1.3.6.1.2.1.43.13 | NodeprtMediaPath | |||
| 1.3.6.1.2.1.43.13.4 | TableprtMediaPathTable | not-accessible | current | The media path table includes both physical and logical paths within the printer. NOTE: The above description has been modified from RFC 1759 for clarification. |
| 1.3.6.1.2.1.43.13.4.1 | RowprtMediaPathEntry | not-accessible | current | Entries may exist in the table for each device index with a device type of 'printer' Each entry defines the physical characteristics of and the status of the m… |
| 1.3.6.1.2.1.43.13.4.1.1 | ColumnprtMediaPathIndex | not-accessible | current | A unique value used by the printer to identify this media path. Although these values may change due to a major reconfiguration of the device (e.g., the additi… |
| 1.3.6.1.2.1.43.13.4.1.2 | ColumnprtMediaPathMaxSpeedPrintUnit | read-only | current | The unit of measure used in specifying the speed of all media paths in the printer. |
| 1.3.6.1.2.1.43.13.4.1.3 | ColumnprtMediaPathMediaSizeUnit | read-only | current | The units of measure of media size for use in calculating and relaying dimensional values for all media paths in the printer. |
| 1.3.6.1.2.1.43.13.4.1.4 | ColumnprtMediaPathMaxSpeed | read-only | current | The maximum printing speed of this media path expressed in prtMediaPathMaxSpeedUnit's. A value of (-1) implies 'other'. |
| 1.3.6.1.2.1.43.13.4.1.5 | ColumnprtMediaPathMaxMediaFeedDir | read-only | current | The maximum physical media size in the feed direction of this media path expressed in units of measure specified by PrtMediaPathMediaSizeUnit. A value of (-1) … |
| 1.3.6.1.2.1.43.13.4.1.6 | ColumnprtMediaPathMaxMediaXFeedDir | read-only | current | The maximum physical media size across the feed direction of this media path expressed in units of measure specified by prtMediaPathMediaSizeUnit. A value of (… |
| 1.3.6.1.2.1.43.13.4.1.7 | ColumnprtMediaPathMinMediaFeedDir | read-only | current | The minimum physical media size in the feed direction of this media path expressed in units of measure specified by prtMediaPathMediaSizeUnit. A value of (-2) … |
| 1.3.6.1.2.1.43.13.4.1.8 | ColumnprtMediaPathMinMediaXFeedDir | read-only | current | The minimum physical media size across the feed direction of this media path expressed in units of measure specified by prtMediaPathMediaSizeUnit. A value of (… |
| 1.3.6.1.2.1.43.13.4.1.9 | ColumnprtMediaPathType | read-only | current | The type of the media path for this media path. |
| 1.3.6.1.2.1.43.13.4.1.10 | ColumnprtMediaPathDescription | read-only | current | The manufacturer-provided description of this media path in the localization specified by prtGeneralCurrentLocalization. |
| 1.3.6.1.2.1.43.13.4.1.11 | ColumnprtMediaPathStatus | read-only | current | The current status of this media path. |
| 1.3.6.1.2.1.43.14 | NodeprtChannel | |||
| 1.3.6.1.2.1.43.14.1 | TableprtChannelTable | not-accessible | current | The channel table represents the set of input data sources which can provide print data to one or more of the interpreters available on a printer. NOTE: The ab… |
| 1.3.6.1.2.1.43.14.1.1 | RowprtChannelEntry | not-accessible | current | Entries may exist in the table for each device index with a device type of 'printer'. Each channel table entry is characterized by a unique protocol stack and/… |
| 1.3.6.1.2.1.43.14.1.1.1 | ColumnprtChannelIndex | not-accessible | current | A unique value used by the printer to identify this data channel. Although these values may change due to a major reconfiguration of the device (e.g., the addi… |
| 1.3.6.1.2.1.43.14.1.1.2 | ColumnprtChannelType | read-only | current | The type of this print data channel. This object provides the linkage to ChannelType-specific groups that may (conceptually) extend the prtChannelTable with ad… |
| 1.3.6.1.2.1.43.14.1.1.3 | ColumnprtChannelProtocolVersion | read-only | current | The version of the protocol used on this channel. The format used for version numbering depends on prtChannelType. |
| 1.3.6.1.2.1.43.14.1.1.4 | ColumnprtChannelCurrentJobCntlLangIndex | read-write | current | The value of prtInterpreterIndex corresponding to the Control Language Interpreter for this channel. This interpreter defines the syntax used for control funct… |
| 1.3.6.1.2.1.43.14.1.1.5 | ColumnprtChannelDefaultPageDescLangIndex | read-write | current | The value of prtInterpreterIndex corresponding to the Page Description Language Interpreter for this channel. This interpreter defines the default Page Descrip… |
| 1.3.6.1.2.1.43.14.1.1.6 | ColumnprtChannelState | read-write | current | The state of this print data channel. The value determines whether control information and print data is allowed through this channel or not. |
| 1.3.6.1.2.1.43.14.1.1.7 | ColumnprtChannelIfIndex | read-write | current | The value of ifIndex in the ifTable; see the Interfaces Group MIB [RFC2863] which corresponds to this channel. When more than one row of the ifTable is relevan… |
| 1.3.6.1.2.1.43.14.1.1.8 | ColumnprtChannelStatus | read-only | current | The current status of the channel. |
| 1.3.6.1.2.1.43.14.1.1.9 | ColumnprtChannelInformation | read-only | current | Auxiliary information to allow a printing application to use the channel for data submission to the printer. An application capable of using a specific PrtChan… |
| 1.3.6.1.2.1.43.15 | NodeprtInterpreter | |||
| 1.3.6.1.2.1.43.15.1 | TableprtInterpreterTable | not-accessible | current | The interpreter table is a table representing the interpreters in the printer. An entry shall be placed in the interpreter table for each interpreter on the pr… |
| 1.3.6.1.2.1.43.15.1.1 | RowprtInterpreterEntry | not-accessible | current | Entries may exist in the table for each device index with a device type of 'printer'. Each table entry provides a complete description of the interpreter, incl… |
| 1.3.6.1.2.1.43.15.1.1.1 | ColumnprtInterpreterIndex | not-accessible | current | A unique value for each PDL or control language for which there exists an interpreter or emulator in the printer. The value is used to identify this interprete… |
| 1.3.6.1.2.1.43.15.1.1.2 | ColumnprtInterpreterLangFamily | read-only | current | The family name of a Page Description Language (PDL) or control language which this interpreter in the printer can interpret or emulate. NOTE: The above descri… |
| 1.3.6.1.2.1.43.15.1.1.3 | ColumnprtInterpreterLangLevel | read-only | current | The level of the language which this interpreter is interpreting or emulating. This might contain a value like '5e'for an interpreter which is emulating level … |
| 1.3.6.1.2.1.43.15.1.1.4 | ColumnprtInterpreterLangVersion | read-only | current | The date code or version of the language which this interpreter is interpreting or emulating. |
| 1.3.6.1.2.1.43.15.1.1.5 | ColumnprtInterpreterDescription | read-only | current | A string to identify this interpreter in the localization specified by prtGeneralCurrentLocalization as opposed to the language which is being interpreted. It … |
| 1.3.6.1.2.1.43.15.1.1.6 | ColumnprtInterpreterVersion | read-only | current | The date code, version number, or other product specific information tied to this interpreter. This value is associated with the interpreter, rather than with … |
| 1.3.6.1.2.1.43.15.1.1.7 | ColumnprtInterpreterDefaultOrientation | read-write | current | The current orientation default for this interpreter. This value may be overridden for a particular job (e.g., by a command in the input data stream). |
| 1.3.6.1.2.1.43.15.1.1.8 | ColumnprtInterpreterFeedAddressability | read-only | current | The maximum interpreter addressability in the feed direction in 10000 prtMarkerAddressabilityUnits (as specified by prtMarkerDefaultIndex) for this interpreter… |
| 1.3.6.1.2.1.43.15.1.1.9 | ColumnprtInterpreterXFeedAddressability | read-only | current | The maximum interpreter addressability in the cross feed direction in 10000 prtMarkerAddressabilityUnits (as specified by prtMarkerDefaultIndex) for this inter… |
| 1.3.6.1.2.1.43.15.1.1.10 | ColumnprtInterpreterDefaultCharSetIn | read-write | current | The default coded character set for input octets encountered outside a context in which the Page Description Language established the interpretation of the oct… |
| 1.3.6.1.2.1.43.15.1.1.11 | ColumnprtInterpreterDefaultCharSetOut | read-write | current | The default character set for data coming from this interpreter through the printer's output channel (i.e. the 'backchannel'). |
| 1.3.6.1.2.1.43.15.1.1.12 | ColumnprtInterpreterTwoWay | read-only | current | Indicates whether or not this interpreter returns information back to the host. |
| 1.3.6.1.2.1.43.16 | NodeprtConsoleDisplayBuffer | |||
| 1.3.6.1.2.1.43.16.5 | TableprtConsoleDisplayBufferTable | not-accessible | current | Physical display buffer for printer console display or operator panel NOTE: The above description has been modified from RFC 1759 for clarification. |
| 1.3.6.1.2.1.43.16.5.1 | RowprtConsoleDisplayBufferEntry | not-accessible | current | This table contains one entry for each physical line on the display. Lines cannot be added or deleted. Entries may exist in the table for each device index wit… |
| 1.3.6.1.2.1.43.16.5.1.1 | ColumnprtConsoleDisplayBufferIndex | not-accessible | current | A unique value for each console line in the printer. The value is used to identify this console line. Although these values may change due to a major reconfigu… |
| 1.3.6.1.2.1.43.16.5.1.2 | ColumnprtConsoleDisplayBufferText | read-write | current | The content of a line in the logical display buffer of the operator's console of the printer. When a write operation occurs, normally a critical message, to on… |
| 1.3.6.1.2.1.43.17 | NodeprtConsoleLights | |||
| 1.3.6.1.2.1.43.17.6 | TableprtConsoleLightTable | not-accessible | current | The console light table provides a description and state information for each light present on the printer console. NOTE: The above description has been modifi… |
| 1.3.6.1.2.1.43.17.6.1 | RowprtConsoleLightEntry | not-accessible | current | Entries may exist in the table for each device index with a device type of 'printer'. NOTE: The above description has been modified from RFC 1759 for clarifica… |
| 1.3.6.1.2.1.43.17.6.1.1 | ColumnprtConsoleLightIndex | not-accessible | current | A unique value used by the printer to identify this light. Although these values may change due to a major reconfiguration of the device (e.g., the addition of… |
| 1.3.6.1.2.1.43.17.6.1.2 | ColumnprtConsoleOnTime | read-write | current | This object, in conjunction with prtConsoleOffTime, defines the current status of the light. If both prtConsoleOnTime and prtConsoleOffTime are non-zero, the l… |
| 1.3.6.1.2.1.43.17.6.1.3 | ColumnprtConsoleOffTime | read-write | current | This object, in conjunction with prtConsoleOnTime, defines the current status of the light. If both prtConsoleOnTime and prtConsoleOffTime are non-zero, the la… |
| 1.3.6.1.2.1.43.17.6.1.4 | ColumnprtConsoleColor | read-only | current | The color of this light. |
| 1.3.6.1.2.1.43.17.6.1.5 | ColumnprtConsoleDescription | read-only | current | The vendor description or label of this light in the localization specified by prtConsoleLocalization. |
| 1.3.6.1.2.1.43.18 | NodeprtAlert | |||
| 1.3.6.1.2.1.43.18.1 | TableprtAlertTable | not-accessible | current | The prtAlertTable lists all the critical and non-critical alerts currently active in the printer. A critical alert is one that stops the printer from printing … |
| 1.3.6.1.2.1.43.18.1.1 | RowprtAlertEntry | not-accessible | current | Entries may exist in the table for each device index with a device type of 'printer'. NOTE: The above description has been modified from RFC 1759 for clarifica… |
| 1.3.6.1.2.1.43.18.1.1.1 | ColumnprtAlertIndex | read-only | current | The index value used to determine which alerts have been added or removed from the alert table. This is an incrementing integer initialized to 1 when the print… |
| 1.3.6.1.2.1.43.18.1.1.2 | ColumnprtAlertSeverityLevel | read-only | current | The level of severity of this alert table entry. The printer determines the severity level assigned to each entry into the table. |
| 1.3.6.1.2.1.43.18.1.1.3 | ColumnprtAlertTrainingLevel | read-only | current | See TEXTUAL-CONVENTION PrtAlertTrainingLevelTC. NOTE: The above description has been modified from RFC 1759 for clarification. |
| 1.3.6.1.2.1.43.18.1.1.4 | ColumnprtAlertGroup | read-only | current | The type of sub-unit within the printer model that this alert is related. Input, output, and markers are examples of printer model groups, i.e., examples of ty… |
| 1.3.6.1.2.1.43.18.1.1.5 | ColumnprtAlertGroupIndex | read-only | current | The low-order index of the row within the table identified by prtAlertGroup that represents the sub-unit of the printer that caused this alert, or -1 if not ap… |
| 1.3.6.1.2.1.43.18.1.1.6 | ColumnprtAlertLocation | read-only | current | The sub-unit location that is defined by the printer manufacturer to further refine the location of this alert within the designated sub-unit. The location is … |
| 1.3.6.1.2.1.43.18.1.1.7 | ColumnprtAlertCode | read-only | current | See associated TEXTUAL-CONVENTION PrtAlertCodeTC. NOTE: The above description has been modified from RFC 1759 for clarification. |
| 1.3.6.1.2.1.43.18.1.1.8 | ColumnprtAlertDescription | read-only | current | A description of this alert entry in the localization specified by prtGeneralCurrentLocalization. The description is provided by the printer to further elabora… |
| 1.3.6.1.2.1.43.18.1.1.9 | ColumnprtAlertTime | read-only | current | The value of sysUpTime at the time that this alert was generated. |
| 1.3.6.1.2.1.43.18.2 | IdentityprinterV1Alert | current | The value of the enterprise-specific OID in an SNMPv1 trap sent signaling a critical event in the prtAlertTable. | |
| 1.3.6.1.2.1.43.18.2.0 | NodeprinterV2AlertPrefix | |||
| 1.3.6.1.2.1.43.18.2.0.1 | NotificationprinterV2Alert | current | This trap is sent whenever a critical event is added to the prtAlertTable. NOTE: The prtAlertIndex object was redundantly included in the bindings of the 'prin… |
Type Definitions
| Name | Syntax | Status | Description |
|---|---|---|---|
| CapacityUnit | INTEGER { tenThousandthsOfInches(3), micrometers(4), sheets(8), feet(16), meters(17) } | deprecated | Units of measure for media capacity. |
| CodedCharSet | INTEGER { other(1) } | deprecated | The original description clause from RFC 1759 [RFC1759] was technically inaccurate and therefore has been deleted. |
| MediaUnit | INTEGER { tenThousandthsOfInches(3), micrometers(4) } | deprecated | Units of measure for media dimensions. |
| PresentOnOff | INTEGER { other(1), on(3), off(4), notPresent(5) } | current | Presence and configuration of a device or feature. |
| PrtAlertSeverityLevelTC | INTEGER { other(1), critical(3), warning(4), warningBinaryChangeEvent(5) } | current | The level of severity of this alert table entry. The printer determines the severity level assigned to each entry in the table. A critical alert is binary by nature and definition. A warning is defined to be a non-criti… |
| PrtCapacityUnitTC | INTEGER { other(1), unknown(2), tenThousandthsOfInches(3), micrometers(4), sheets(8), feet(16), meters(17), items(18), percent(19) } | current | Units of measure for media capacity. |
| PrtChannelStateTC | INTEGER { other(1), printDataAccepted(3), noDataAccepted(4) } | current | The state of this print job delivery channel. The value determines whether print data is allowed through this channel. |
| PrtConsoleDescriptionStringTC | OCTET STRING (SIZE(0..255)) | current | An object MUST use this TEXTUAL-CONVENTION when its 'charset' is controlled by the value of prtConsoleLocalization. |
| PrtInterpreterTwoWayTC | INTEGER { yes(3), no(4) } | current | Indicates whether or not this interpreter returns information back to the host. |
| PrtLocalizedDescriptionStringTC | OCTET STRING (SIZE(0..255)) | current | An object MUST use this TEXTUAL-CONVENTION when its 'charset' is controlled by the value of prtGeneralCurrentLocalization. |
| PrtMarkerAddressabilityUnitTC | INTEGER { tenThousandthsOfInches(3), micrometers(4) } | current | The unit of measure of distances, as applied to the marker's resolution. |
| PrtMarkerColorantRoleTC | INTEGER { other(1), process(3), spot(4) } | current | The role played by this colorant. |
| PrtMarkerCounterUnitTC | INTEGER { tenThousandthsOfInches(3), micrometers(4), characters(5), lines(6), impressions(7), sheets(8), dotRow(9), hours(11), feet(16), meters(17) } | current | The unit that will be used by the printer when reporting counter values for this marking sub-unit. The time units of measure are provided for a device like a strip recorder that does not or cannot track the physical dim… |
| PrtMarkerSuppliesClassTC | INTEGER { other(1), supplyThatIsConsumed(3), receptacleThatIsFilled(4) } | current | Indicates whether this supply entity represents a supply that is consumed or a receptacle that is filled. |
| PrtMarkerSuppliesSupplyUnitTC | INTEGER { other(1), unknown(2), tenThousandthsOfInches(3), micrometers(4), impressions(7), sheets(8), hours(11), thousandthsOfOunces(12), tenthsOfGrams(13), hundrethsOfFluidOunces(14), tenthsOfMilliliters(15), feet(16), meters(17), items(18), percent(19) } | current | Unit of this marker supply container/receptacle. |
| PrtMediaPathMaxSpeedPrintUnitTC | INTEGER { tenThousandthsOfInchesPerHour(3), micrometersPerHour(4), charactersPerHour(5), linesPerHour(6), impressionsPerHour(7), sheetsPerHour(8), dotRowPerHour(9), feetPerHour(16), metersPerHour(17) } | current | The unit of measure used in specifying the speed of all media paths in the printer. |
| PrtMediaUnitTC | INTEGER { tenThousandthsOfInches(3), micrometers(4) } | current | Units of measure for media dimensions. |
| PrtOutputPageDeliveryOrientationTC | INTEGER { faceUp(3), faceDown(4) } | current | The reading surface that will be 'up' when pages are delivered to the associated output sub-unit. Values are Face-Up and Face Down (Note: interpretation of these values is, in general, context-dependent based on locale;… |
| PrtOutputStackingOrderTC | INTEGER { unknown(2), firstToLast(3), lastToFirst(4) } | current | The current state of the stacking order for the associated output sub-unit. 'firstToLast' means that as pages are output, the front of the next page is placed against the back of the previous page. 'lastToFirst' means t… |
| PrtPrintOrientationTC | INTEGER { other(1), portrait(3), landscape(4) } | current | A generic representation for printing orientation on a 'page'. |
| PrtSubUnitStatusTC | INTEGER (0..126) | current | Status of a printer sub-unit. The SubUnitStatus is an integer that is the sum of 5 distinct values, Availability, Non-Critical, Critical, On-line, and Transitioning. These values are: Availability Value Available and Id… |
| SubUnitStatus | INTEGER (0..126) | deprecated | Status of a printer sub-unit. The SubUnitStatus is an integer that is the sum of 5 distinct values, Availability, Non-Critical, Critical, On-line, and Transitioning. These values are: Availability Value Available and Id… |