LIEBERT-GP-AGENT-MIB
44 objects
The MIB module used to specify Liebert software or firmware agent SNMP OIDs. Copyright 2000-2008 Liebert Corporation. All rights reserved. Reproduction of this document is authorized on the condition that the forgoing copyright notice is included. This Specification is supplied 'AS IS' and Liebert Corporation makes no warranty, either express or implied, as to the use, operation, condition, or performance of the Specification.
Imported Objects
| LIEBERT-GP-CONDITIONS-MIB | lgpConditionDescription lgpConditionsPresent lgpNetworkName |
| LIEBERT-GP-REGISTRATION-MIB | lgpAgentControl lgpAgentDevice lgpAgentIdent lgpAgentNotifications liebertAgentModuleReg |
| RFC1213-MIB | sysUpTime |
| SNMPv2-SMI | Integer32 MODULE-IDENTITY NOTIFICATION-TYPE OBJECT-IDENTITY OBJECT-TYPE Unsigned32 |
| SNMPv2-TC | DisplayString |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.476.1.42.1.2.1 | IdentityliebertAgentModule | The MIB module used to specify Liebert software or firmware agent SNMP OIDs. Copyright 2000-2008 Liebert Corporation. All rights reserved. Reproduction of this… | ||
| 1.3.6.1.4.1.476.1.42.2.1.1 | ScalarlgpAgentIdentManufacturer | read-only | current | The agent manufacturer. |
| 1.3.6.1.4.1.476.1.42.2.1.2 | ScalarlgpAgentIdentModel | read-only | current | The agent model designation. This identifier is typically a model name or ID |
| 1.3.6.1.4.1.476.1.42.2.1.3 | ScalarlgpAgentIdentFirmwareVersion | read-only | current | The firmware revision level of the agent. |
| 1.3.6.1.4.1.476.1.42.2.1.4 | ScalarlgpAgentIdentSerialNumber | read-only | current | The serial number of the agent. This is a string of alphanumeric characters that uniquely identifies the agent hardware. This number is assigned when the agent… |
| 1.3.6.1.4.1.476.1.42.2.1.5 | ScalarlgpAgentIdentPartNumber | read-only | current | The agent model part number designation. |
| 1.3.6.1.4.1.476.1.42.2.1.6 | ScalarlgpAgentConnectedDeviceCount | read-only | current | The number of devices currently connected and communicating successfully with the agent. Devices for which communications are currently being attempted are not… |
| 1.3.6.1.4.1.476.1.42.2.3.0 | IdentitylgpAgentEventNotifications | current | Agent specific notifications. | |
| 1.3.6.1.4.1.476.1.42.2.3.0.0 | IdentitylgpAgentEventNotificationsLegacy | current | This branch contains copies of the notifications registered directly below lgpAgentEventNotifications. These are here to provide support for some legacy device… | |
| 1.3.6.1.4.1.476.1.42.2.3.0.0.1 | NotificationlgpAgentDeviceCommunicationLostLegacy | current | The agent has lost communications with a managed device. | |
| 1.3.6.1.4.1.476.1.42.2.3.0.0.5 | NotificationlgpAgentFirmwareUpdateSuccessfulLegacy | current | The firmware update to the agent card has completed successfully. | |
| 1.3.6.1.4.1.476.1.42.2.3.0.0.6 | NotificationlgpAgentFirmwareCorruptLegacy | current | The firmware update to the agent card has failed and the firmware is now corrupt. | |
| 1.3.6.1.4.1.476.1.42.2.3.0.0.7 | NotificationlgpAgentHeartbeatLegacy | current | The agent card is alive. | |
| 1.3.6.1.4.1.476.1.42.2.3.0.0.8 | NotificationlgpAgentDnsLookupFailureLegacy | current | A Domain Name System (DNS) lookup of a network name failed to resolve. This may result in one or more of the following: 1. failure to notify a target address o… | |
| 1.3.6.1.4.1.476.1.42.2.3.0.1 | NotificationlgpAgentDeviceCommunicationLost | current | The agent has lost communications with a managed device. | |
| 1.3.6.1.4.1.476.1.42.2.3.0.5 | NotificationlgpAgentFirmwareUpdateSuccessful | current | The firmware update to the agent card has completed successfully. | |
| 1.3.6.1.4.1.476.1.42.2.3.0.6 | NotificationlgpAgentFirmwareCorrupt | current | The firmware update to the agent card has failed and the firmware is now corrupt. | |
| 1.3.6.1.4.1.476.1.42.2.3.0.7 | NotificationlgpAgentHeartbeat | current | The agent card is alive. | |
| 1.3.6.1.4.1.476.1.42.2.3.0.8 | NotificationlgpAgentDnsLookupFailure | current | A Domain Name System (DNS) lookup of a network name failed to resolve. This may result in one or more of the following: 1. failure to notify a target address o… | |
| 1.3.6.1.4.1.476.1.42.2.4.2 | TablelgpAgentManagedDeviceTable | not-accessible | current | This table contains one entry for each managed device. |
| 1.3.6.1.4.1.476.1.42.2.4.2.1 | RowlgpAgentManagedDeviceEntry | not-accessible | current | This entry describes a row in the table 'lgpAgentManagedDeviceTable'. The rows in this table cannot be created by the NMS. The rows are automatically created b… |
| 1.3.6.1.4.1.476.1.42.2.4.2.1.1 | ColumnlgpAgentDeviceIndex | read-only | current | The device identifier. This is used as an index to address a particular row in the table 'lgpAgentManagedDeviceTable'. |
| 1.3.6.1.4.1.476.1.42.2.4.2.1.2 | ColumnlgpAgentDeviceId | read-only | current | The managed device specific identifier defined by the product registration. |
| 1.3.6.1.4.1.476.1.42.2.4.2.1.3 | ColumnlgpAgentDeviceManufacturer | read-only | current | The managed device manufacturer. |
| 1.3.6.1.4.1.476.1.42.2.4.2.1.4 | ColumnlgpAgentDeviceModel | read-only | current | The managed device model designation. |
| 1.3.6.1.4.1.476.1.42.2.4.2.1.5 | ColumnlgpAgentDeviceFirmwareVersion | read-only | current | The firmware revision level of the managed device. |
| 1.3.6.1.4.1.476.1.42.2.4.2.1.6 | ColumnlgpAgentDeviceUnitNumber | read-write | current | The managed device unit number. Typically this is a number assigned to a managed device that uniquely identifies it from other similar devices within a 'system… |
| 1.3.6.1.4.1.476.1.42.2.4.2.1.7 | ColumnlgpAgentDeviceSerialNumber | read-only | current | The serial number of the managed device. |
| 1.3.6.1.4.1.476.1.42.2.4.2.1.8 | ColumnlgpAgentDeviceManufactureDate | read-only | current | The manufacture date of the managed device. |
| 1.3.6.1.4.1.476.1.42.2.4.2.1.9 | ColumnlgpAgentDeviceServiceContact | read-write | current | The service contact of the managed device. |
| 1.3.6.1.4.1.476.1.42.2.4.2.1.10 | ColumnlgpAgentDeviceServicePhoneNumber | read-write | current | The phone number of the service contact of the managed device. |
| 1.3.6.1.4.1.476.1.42.2.4.2.1.11 | ColumnlgpAgentDeviceServiceAddrLine1 | read-write | current | Line 1 of the service address of the managed device. |
| 1.3.6.1.4.1.476.1.42.2.4.2.1.12 | ColumnlgpAgentDeviceServiceAddrLine2 | read-write | current | Line 2 of the service address of the managed device. |
| 1.3.6.1.4.1.476.1.42.2.4.2.1.13 | ColumnlgpAgentDeviceServiceAddrLine3 | read-write | current | Line 3 of the service address of the managed device. |
| 1.3.6.1.4.1.476.1.42.2.4.2.1.14 | ColumnlgpAgentDeviceServiceAddrLine4 | read-write | current | Line 4 of the service address of the managed device. |
| 1.3.6.1.4.1.476.1.42.2.4.2.1.15 | ColumnlgpAgentDeviceUnitName | read-write | current | Unit name for the managed device assigned by the customer. |
| 1.3.6.1.4.1.476.1.42.2.4.2.1.16 | ColumnlgpAgentDeviceSiteIdentifier | read-write | current | Identifier that uniquely identifies the site where this device is located. |
| 1.3.6.1.4.1.476.1.42.2.4.2.1.17 | ColumnlgpAgentDeviceTagNumber | read-write | current | Identifier that uniquely identifies this device within a particular site (see lgpAgentDeviceSiteIdentifier). |
| 1.3.6.1.4.1.476.1.42.2.4.2.1.18 | ColumnlgpAgentDeviceOrderLine1 | read-write | current | Customer Sales Order information line 1. |
| 1.3.6.1.4.1.476.1.42.2.4.2.1.19 | ColumnlgpAgentDeviceOrderLine2 | read-write | current | Customer Sales Order information line 2. |
| 1.3.6.1.4.1.476.1.42.2.5.1 | ScalarlgpAgentReboot | read-write | current | Perform an immediate 'reboot' of the agent process. When possible the reboot will approximate a power on reset of the agent communications hardware. This type … |
| 1.3.6.1.4.1.476.1.42.2.5.2 | ScalarlgpAgentTelnetEnabled | read-write | current | This object represents the settings of Telnet. yes Telnet services are enabled. no Telnet services are disabled. The system must be rebooted before changes can… |
| 1.3.6.1.4.1.476.1.42.2.5.3 | ScalarlgpAgentVelocityServerEnabled | read-write | current | This object configures the Velocity Server to grant external clients access to agent data via the Liebert Velocity protocol. yes Agent data is available to ext… |
| 1.3.6.1.4.1.476.1.42.2.5.4 | ScalarlgpAgentWebServerMode | read-write | current | This object represents the settings of Web services. disabled Web services are disabled. http Web server mode is HTTP (not secure). https Web server mode is se… |