LIEBERT-GP-SYSTEM-MIB
32 objects
The MIB module used to specify Liebert Controller OIDs Copyright 2000-2008 Liebert Corporation. All rights reserved. Reproduction of this document is authorized on the condition that the forgoing copyright notice is included. This Specification is supplied 'AS IS' and Liebert Corporation makes no warranty, either express or implied, as to the use, operation, condition, or performance of the Specification.
Imported Objects
| LIEBERT-GP-AGENT-MIB | lgpAgentConnectedDeviceCount lgpAgentDeviceIndex |
| LIEBERT-GP-REGISTRATION-MIB | lgpSystem liebertSystemModuleReg |
| RFC1213-MIB | sysUpTime |
| SNMPv2-SMI | Integer32 MODULE-IDENTITY NOTIFICATION-TYPE OBJECT-IDENTITY OBJECT-TYPE Unsigned32 |
| SNMPv2-TC | DisplayString |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.476.1.42.1.8.1 | IdentityliebertSystemModule | The MIB module used to specify Liebert Controller OIDs Copyright 2000-2008 Liebert Corporation. All rights reserved. Reproduction of this document is authorize… | ||
| 1.3.6.1.4.1.476.1.42.3.7.1 | IdentitylgpSysStatistics | current | This sub-tree is used to register Liebert System Statistics object identifiers. | |
| 1.3.6.1.4.1.476.1.42.3.7.1.1 | ScalarlgpSysStatisticsRunHrs | read-only | current | Accumulated run hours of the system. |
| 1.3.6.1.4.1.476.1.42.3.7.2 | IdentitylgpSysStatus | current | This sub-tree is used to register Liebert System Status object identifiers. | |
| 1.3.6.1.4.1.476.1.42.3.7.2.1 | ScalarlgpSysSelfTestResult | read-only | current | The outcome of the previous self-test. |
| 1.3.6.1.4.1.476.1.42.3.7.2.2 | ScalarlgpSysState | read-only | current | The operating status for the system. The intent of this data is to provide a high level status of the system. The possible states are: normalOperation(1) The s… |
| 1.3.6.1.4.1.476.1.42.3.7.3 | IdentitylgpSysSettings | current | This sub-tree is used to register Liebert System Settings object identifiers. | |
| 1.3.6.1.4.1.476.1.42.3.7.3.1 | ScalarlgpSysAudibleAlarm | read-write | current | The state of the audible alarm of the device. |
| 1.3.6.1.4.1.476.1.42.3.7.4 | IdentitylgpSysControl | current | This sub-tree is used to register Liebert System Control object identifiers. | |
| 1.3.6.1.4.1.476.1.42.3.7.4.1 | ScalarlgpSysSelfTest | read-write | current | Self-Test Command. This command will initiate a system self-test of the system. If already initiated, this command will abort the self-test. This command shoul… |
| 1.3.6.1.4.1.476.1.42.3.7.4.2 | ScalarlgpSysControlOperationOnOff | read-write | current | This object allows control of the system functionality. This will not affect the communications or control of the system, so that once turned off, the system o… |
| 1.3.6.1.4.1.476.1.42.3.7.5 | IdentitylgpSysTime | current | This sub-tree is used to register Liebert System Time object identifiers. | |
| 1.3.6.1.4.1.476.1.42.3.7.5.1 | ScalarlgpSysTimeEpoch | read-write | current | The present time of the system. This time is represented as the number of seconds since the epoch of 1970-01-01 00:00:00 GMT. |
| 1.3.6.1.4.1.476.1.42.3.7.6 | IdentitylgpSysMaintenance | current | This sub-tree is used to register Liebert System Maintenance object identifiers. | |
| 1.3.6.1.4.1.476.1.42.3.7.6.1 | ScalarlgpSysMaintenanceCapacity | read-only | current | The relative percentage of time that has elapsed since the last scheduled maintenance was performed. When this value reaches 100%, the device is due for anothe… |
| 1.3.6.1.4.1.476.1.42.3.7.6.2 | ScalarlgpSysMaintenanceYear | read-only | current | The year in which the next scheduled service is due |
| 1.3.6.1.4.1.476.1.42.3.7.6.3 | ScalarlgpSysMaintenanceMonth | read-only | current | The month in which the next scheduled service is due |
| 1.3.6.1.4.1.476.1.42.3.7.7 | ScalarlgpSysEventDescription | read-only | current | An ASCII textual description for the event. This object is primarily used in the varbind of some notifications to provide a simple human-readable description. |
| 1.3.6.1.4.1.476.1.42.3.7.8 | IdentitylgpSysEventNotifications | current | This sub-tree is used to register Liebert System Notification object identifiers. | |
| 1.3.6.1.4.1.476.1.42.3.7.8.1 | NotificationlgpSysNotification | current | This notification is a generic notification intended for direct user visibility. The user event description identifies the system condition that has occurred. … | |
| 1.3.6.1.4.1.476.1.42.3.7.8.2 | NotificationlgpSysNormal | current | The system has returned to a normal operating state. This implies prior to the generation of this event the system was operating in a state where one or more a… | |
| 1.3.6.1.4.1.476.1.42.3.7.9 | IdentitylgpSysDeviceComponentGroup | current | This sub-tree registers well known device components. | |
| 1.3.6.1.4.1.476.1.42.3.7.9.1 | TablelgpSysDeviceComponentTable | not-accessible | current | A list of components of devices identified by their serial number and or model number. This table contains zero, one, or many rows. The NMS cannot create or de… |
| 1.3.6.1.4.1.476.1.42.3.7.9.1.1 | RowlgpSysDeviceComponentEntry | not-accessible | current | This entry defines the contents of the columns for the table 'lgpSysDeviceComponentTable'. |
| 1.3.6.1.4.1.476.1.42.3.7.9.1.1.1 | ColumnlgpSysDeviceComponentIndex | not-accessible | current | This is the index indicating the row in the table 'lgpSysDeviceComponentTable' for a component entry. |
| 1.3.6.1.4.1.476.1.42.3.7.9.1.1.2 | ColumnlgpSysDeviceComponentDescr | read-only | current | An OID representing a component of the device indicated by the index lgpAgentDeviceIndex. |
| 1.3.6.1.4.1.476.1.42.3.7.9.1.1.3 | ColumnlgpSysDeviceComponentSerialNum | read-only | current | This is the serial number of the component described by the OID 'lgpSysDeviceComponentDescr'. This data is intended for display / human consumption. Do not use… |
| 1.3.6.1.4.1.476.1.42.3.7.9.1.1.4 | ColumnlgpSysDeviceComponentModelNum | read-only | current | This is the model identifier of the component described by the OID 'lgpSysDeviceComponentDescr'. This data is intended for display / human consumption. Do not … |
| 1.3.6.1.4.1.476.1.42.3.7.9.5 | IdentitylgpSysDeviceComponentWellknown | current | This sub-tree registers well known Liebert System Components. | |
| 1.3.6.1.4.1.476.1.42.3.7.9.5.5 | IdentitylgpSysDeviceBatCabinet | current | This sub-tree is used to register a battery cabinet component. To determine the cabinet being described in a multi-cabinet system, this point implements an add… | |
| 1.3.6.1.4.1.476.1.42.3.7.9.5.6 | IdentitylgpSysDeviceParallelCabinet | current | This sub-tree is used to register a parallel cabinet. | |
| 1.3.6.1.4.1.476.1.42.3.7.9.5.7 | IdentitylgpSysDeviceMaintBypass | current | This sub-tree is used to register the maintenance bypass. |