LLDP-EXT-DCBX-MIB
87 objects
The LLDP Management Information Base extension module for DCB Capability Exchage Protocol (DCBX). In order to assure the uniqueness of the LLDP-MIB, lldpXdcbxMIB is branched from lldpExtensions using OUI value as the node. An OUI/'company_id' is a 24 bit globally unique assigned number referenced by various standards.
Imported Objects
| LLDP-MIB | lldpExtensions LldpPortNumber |
| SNMP-FRAMEWORK-MIB | SnmpAdminString |
| SNMPv2-CONF | MODULE-COMPLIANCE NOTIFICATION-GROUP OBJECT-GROUP |
| SNMPv2-SMI | Integer32 MODULE-IDENTITY NOTIFICATION-TYPE OBJECT-TYPE |
| SNMPv2-TC | TEXTUAL-CONVENTION TruthValue |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.0.8802.1.1.2.1.5.6945 | IdentitylldpXdcbxMIB | The LLDP Management Information Base extension module for DCB Capability Exchage Protocol (DCBX). In order to assure the uniqueness of the LLDP-MIB, lldpXdcbxM… | ||
| 1.0.8802.1.1.2.1.5.6945.0 | NodelldpXdcbxNotifications | |||
| 1.0.8802.1.1.2.1.5.6945.0.1 | NotificationlldpXdcbxMiscControlError | current | This trap is sent whenever an error occurs with DCBX control and there is no other trap defined for the specific error condition. | |
| 1.0.8802.1.1.2.1.5.6945.0.2 | NotificationlldpXdcbxMiscFeatureError | current | This trap is sent whenever lldpXdcbxFeatError is true and there is no other trap defined for the specific error condition. | |
| 1.0.8802.1.1.2.1.5.6945.0.3 | NotificationlldpXdcbxMultiplePeers | current | This trap is sent when multiple LLDP neighbors are detected on the same port. DCBX is expected to operate over a point to point link. If multiple LLDP neighbor… | |
| 1.0.8802.1.1.2.1.5.6945.0.4 | NotificationlldpXdcbxLldpTxDisabled | current | This trap is sent when the LLDP transmit has been disabled. LLDP gives administrator control to enable/disable the protocol independently on the Rx side and Tx… | |
| 1.0.8802.1.1.2.1.5.6945.0.5 | NotificationlldpXdcbxLldpRxDisabled | current | This trap is sent when the LLDP receive has been disabled. LLDP gives administrator control to enable/disable the protocol independently on the Rx side and Tx … | |
| 1.0.8802.1.1.2.1.5.6945.0.6 | NotificationlldpXdcbxDupControlTlv | current | This trap is sent when a duplicate control Sub-TLV is detected. The DCBX Control Sub-TLV and the set of Feature Sub-TLVs can be arranged in any order within th… | |
| 1.0.8802.1.1.2.1.5.6945.0.7 | NotificationlldpXdcbxDupFeatureTlv | current | This trap is sent when a duplicate feature Sub-TLV is detected. The DCBX Control Sub-TLV and the set of Feature Sub-TLVs can be arranged in any order within th… | |
| 1.0.8802.1.1.2.1.5.6945.0.8 | NotificationlldpXdcbxPeerNoFeat | current | This trap is sent when a feature is not supported on by a peer. This condition can occur when a device does not support a feature (not really an error) or if t… | |
| 1.0.8802.1.1.2.1.5.6945.0.9 | NotificationlldpXdcbxPeerNoResp | current | This trap is sent when the peer has stopped responding as evidenced by an LLDP timeout event. | |
| 1.0.8802.1.1.2.1.5.6945.0.10 | NotificationlldpXdcbxPeerConfigMismatch | current | This trap is sent when the configuration received from peer results into partial or complete mismatch. | |
| 1.0.8802.1.1.2.1.5.6945.1 | NodelldpXdcbxObjects | |||
| 1.0.8802.1.1.2.1.5.6945.1.1 | TablelldpXdcbxPortTable | not-accessible | current | A list of all ports capable of supporting DCBX. |
| 1.0.8802.1.1.2.1.5.6945.1.1.1 | RowlldpXdcbxPortEntry | not-accessible | current | An entry containing DCBX control parameters for a particular port. |
| 1.0.8802.1.1.2.1.5.6945.1.1.1.1 | ColumnlldpXdcbxPortNumber | read-only | current | Each port contained in the chassis (that is known to the LLDP agent) is uniquely identified by a port number. A port number has no mandatory relationship to an… |
| 1.0.8802.1.1.2.1.5.6945.1.1.1.2 | ColumnlldpXdcbxPortEnable | read-write | current | A device capable of any DCB feature must have DCBX enabled by default with an option for DCBX to be administratively disabled. |
| 1.0.8802.1.1.2.1.5.6945.1.1.1.3 | ColumnlldpXdcbxPortVersionOper | read-only | current | Operating version of the DCBX protocol. The system adjusts as needed to operate at the highest version supported by both link partners. |
| 1.0.8802.1.1.2.1.5.6945.1.1.1.4 | ColumnlldpXdcbxPortVersionMax | read-only | current | Highest DCBX protocol version supported by the system. Version numbers start at zero. The DCBX protocol must be backward compatible with all previous versions. |
| 1.0.8802.1.1.2.1.5.6945.1.1.1.5 | ColumnlldpXdcbxPortSeqNo | read-only | current | A value that changes each time an exchanged parameter in one or more of the DCB feature TLV�s changes. |
| 1.0.8802.1.1.2.1.5.6945.1.1.1.6 | ColumnlldpXdcbxPortAckNo | read-only | current | The SeqNo value from the most recent peer DCBX TLV that has been handled. This acknowledges to the peer that a specific SeqNo has been received. |
| 1.0.8802.1.1.2.1.5.6945.2 | NodelldpXdcbxFeatures | |||
| 1.0.8802.1.1.2.1.5.6945.2.1 | TablelldpXdcbxFeatTable | not-accessible | current | A list of DCBX features configured on this system. |
| 1.0.8802.1.1.2.1.5.6945.2.1.1 | RowlldpXdcbxFeatEntry | not-accessible | current | A entry containing DCBX feature parameters which are common to all features. |
| 1.0.8802.1.1.2.1.5.6945.2.1.1.1 | ColumnlldpXdcbxFeatType | read-write | current | Type code of the DCB Feature. Following is a list of defined types: 2 � Priority Groups 3 � Priority Flow Control 4 � Application Protocol |
| 1.0.8802.1.1.2.1.5.6945.2.1.1.2 | ColumnlldpXdcbxFeatSubType | read-write | current | Some Feature TLVs may define subtypes that are specific to that feature. When subtypes are not defined by a specific feature, subtype field should be set to ze… |
| 1.0.8802.1.1.2.1.5.6945.2.1.1.3 | ColumnlldpXdcbxFeatVersionOper | read-only | current | Operating version of the feature. The system adjusts to operate at the highest version supported by both link partners. |
| 1.0.8802.1.1.2.1.5.6945.2.1.1.4 | ColumnlldpXdcbxFeatVersionMax | read-only | current | Highest feature version supported by the system. Version numbers start at zero. The feature must be backward compatible for all previous versions. |
| 1.0.8802.1.1.2.1.5.6945.2.1.1.5 | ColumnlldpXdcbxFeatEnable | read-write | current | Locally administered parameter that indicates whether the DCB feature is enabled or not. |
| 1.0.8802.1.1.2.1.5.6945.2.1.1.6 | ColumnlldpXdcbxFeatWilling | read-write | current | Locally administered parameter that indicates whether this feature accepts its configuration from the peer or not. When set to TRUE, the system uses the Desire… |
| 1.0.8802.1.1.2.1.5.6945.2.1.1.7 | ColumnlldpXdcbxFeatError | read-only | current | Indicates that an error has occurred during the configuration exchange with the peer. Error is set TRUE when the OperCfg and OperMode of a feature cannot be se… |
| 1.0.8802.1.1.2.1.5.6945.2.1.1.8 | ColumnlldpXdcbxFeatAdvertise | read-write | current | Locally administered parameter that indicates whether this feature is exchanged in the DCBX TLV. When Advertise is False, received TLVs for this feature are ig… |
| 1.0.8802.1.1.2.1.5.6945.2.1.1.9 | ColumnlldpXdcbxFeatOperMode | read-only | current | Operational state of the feature. |
| 1.0.8802.1.1.2.1.5.6945.2.1.1.10 | ColumnlldpXdcbxFeatSyncd | read-only | current | Indicates whether the current DesiredCfg has been received by the peer. |
| 1.0.8802.1.1.2.1.5.6945.2.1.1.11 | ColumnlldpXdcbxFeatSeqNo | read-only | current | When Syncd is False, this indicates the value that SeqNo must become equal to before Syncd can become True. |
| 1.0.8802.1.1.2.1.5.6945.2.1.1.12 | ColumnlldpXdcbxFeatPeerWilling | read-only | current | The Willing state of the peer as received in a DCBX TLV from the peer. |
| 1.0.8802.1.1.2.1.5.6945.2.1.1.13 | ColumnlldpXdcbxFeatLocalParameterChange | read-only | current | Indicates that a configurable DCB Feature TLV field or state variable has been modified on the local system. |
| 1.0.8802.1.1.2.1.5.6945.2.1.1.14 | ColumnlldpXdcbxFeatPeerEnable | read-only | current | Private Extension: The Feature Enable state of the peer as received in a DCBX TLV from the peer. |
| 1.0.8802.1.1.2.1.5.6945.2.1.1.15 | ColumnlldpXdcbxFeatPeerError | read-only | current | Private Extension: The Feature Error state of the peer as received in a DCBX TLV from the peer. |
| 1.0.8802.1.1.2.1.5.6945.2.1.1.16 | ColumnlldpXdcbxFeatPeerAdvertise | read-write | current | Private Extension: The Feature Advertisment state of the peer as received in a DCBX TLV from the peer. |
| 1.0.8802.1.1.2.1.5.6945.2.1.1.17 | ColumnlldpXdcbxFeatPeerTC | read-only | current | Private Extension: Number of TCs that supported on the peer. Relevan for PG and PFC features. If not relevant (as for App feat), will be set to 0. |
| 1.0.8802.1.1.2.1.5.6945.2.2 | NodelldpXdcbxFeatPg | |||
| 1.0.8802.1.1.2.1.5.6945.2.2.1 | ScalarlldpXdcbxFeatPgNumTCsSupported | read-write | current | Number of TCs supported by device. Number of Priority Groups supported by a device can not be more than number of TCs supported. |
| 1.0.8802.1.1.2.1.5.6945.2.2.2 | TablelldpXdcbxFeatPgPrioAllocTable | not-accessible | current | A list of priorities and the their priority group assignment or declaration of no bandwidth limit. |
| 1.0.8802.1.1.2.1.5.6945.2.2.2.1 | RowlldpXdcbxFeatPgPrioAllocEntry | not-accessible | current | An entry for a priority which allows the priority to be assigned to a priority group, or declared with no bandwidth limit. |
| 1.0.8802.1.1.2.1.5.6945.2.2.2.1.1 | ColumnlldpXdcbxFeatPgPrioAllocPrioId | read-write | current | The priority which is to be assigned to a priority group, or defined with no bandwidth limit. |
| 1.0.8802.1.1.2.1.5.6945.2.2.2.1.2 | ColumnlldpXdcbxFeatPgPrioAllocPgIdDesired | read-write | current | The locally configured priority group value assigned to this priority. |
| 1.0.8802.1.1.2.1.5.6945.2.2.2.1.3 | ColumnlldpXdcbxFeatPgPrioAllocPgIdOper | read-only | current | The operating priority group value assigned to this priority. NOTE: This value may be different than the locally desired value depending on whether or not this… |
| 1.0.8802.1.1.2.1.5.6945.2.2.2.1.4 | ColumnlldpXdcbxFeatPgPrioAllocPgIdPeer | read-only | current | The priority group value that the peer desires to assign to this priority. |
| 1.0.8802.1.1.2.1.5.6945.2.2.3 | TablelldpXdcbxFeatPgBwAllocTable | not-accessible | current | A list of priority group bandwidth allocations. |
| 1.0.8802.1.1.2.1.5.6945.2.2.3.1 | RowlldpXdcbxFeatPgBwAllocEntry | not-accessible | current | An entry for a priority group bandwidth allocation. |
| 1.0.8802.1.1.2.1.5.6945.2.2.3.1.1 | ColumnlldpXdcbxFeatPgBwAllocPgId | read-write | current | The priority group for which bandwidth is allocated in this table. |
| 1.0.8802.1.1.2.1.5.6945.2.2.3.1.2 | ColumnlldpXdcbxFeatPgBwAllocBwDesired | read-write | current | The locally configured bandwidth allocated to this priority group. |
| 1.0.8802.1.1.2.1.5.6945.2.2.3.1.3 | ColumnlldpXdcbxFeatPgBwAllocBwOper | read-only | current | The operating bandwidth allocated to this priority group. NOTE: This value may be different than the locally desired value depending on whether or not this fea… |
| 1.0.8802.1.1.2.1.5.6945.2.2.3.1.4 | ColumnlldpXdcbxFeatPgBwAllocBwPeer | read-only | current | The bandwidth allocation that the peer desires to assign to this priority group. |
| 1.0.8802.1.1.2.1.5.6945.2.3 | NodelldpXdcbxFeatPfc | |||
| 1.0.8802.1.1.2.1.5.6945.2.3.1 | ScalarlldpXdcbxFeatPfcNumTCPFCSupported | read-write | current | Number of TCs that can simultaneously support PFC. |
| 1.0.8802.1.1.2.1.5.6945.2.3.2 | TablelldpXdcbxFeatPfcTable | not-accessible | current | A list of priority flow control configurations for each priority. |
| 1.0.8802.1.1.2.1.5.6945.2.3.2.1 | RowlldpXdcbxFeatPfcEntry | not-accessible | current | An entry for configuring priority flow control for each priority. |
| 1.0.8802.1.1.2.1.5.6945.2.3.2.1.1 | ColumnlldpXdcbxFeatPfcPriority | read-write | current | The priority for which priority flow control is being configured. |
| 1.0.8802.1.1.2.1.5.6945.2.3.2.1.2 | ColumnlldpXdcbxFeatPfcEnableDesired | read-write | current | The locally configured status of priority flow control for this priority. 0: Disabled 1: Enabled PFC Enabled means that flow control in both directions (Rx and… |
| 1.0.8802.1.1.2.1.5.6945.2.3.2.1.3 | ColumnlldpXdcbxFeatPfcEnableOper | read-only | current | The operating status of priority flow control for this priority. NOTE: This value may be different than the locally desired value depending on whether or not t… |
| 1.0.8802.1.1.2.1.5.6945.2.3.2.1.4 | ColumnlldpXdcbxFeatPfcEnablePeer | read-only | current | The priority flow control status that the peer desires to assign to this priority. |
| 1.0.8802.1.1.2.1.5.6945.2.4 | NodelldpXdcbxFeatAppProto | |||
| 1.0.8802.1.1.2.1.5.6945.2.4.1 | TablelldpXdcbxFeatAppProtoTable | not-accessible | current | A list of Application Protocol configurations. |
| 1.0.8802.1.1.2.1.5.6945.2.4.1.1 | RowlldpXdcbxFeatAppProtoEntry | not-accessible | current | An entry for configuring Application Protocol ID. |
| 1.0.8802.1.1.2.1.5.6945.2.4.1.1.1 | ColumnlldpXdcbxFeatAppProtoIndex | read-write | current | The index of the Application Protocol being configured in a list of Application Protocols. |
| 1.0.8802.1.1.2.1.5.6945.2.4.1.1.2 | ColumnlldpXdcbxFeatAppProtoSF | read-write | current | The value of the Selector Field for this application protocol. |
| 1.0.8802.1.1.2.1.5.6945.2.4.1.1.3 | ColumnlldpXdcbxFeatAppProtoOUI | read-write | current | The value of the Application Protocol OUI for this application protocol. |
| 1.0.8802.1.1.2.1.5.6945.2.4.1.1.4 | ColumnlldpXdcbxFeatAppProtoId | read-write | current | The value of the Application Protocol ID for this application protocol. |
| 1.0.8802.1.1.2.1.5.6945.2.4.2 | TablelldpXdcbxFeatAppProtoPrioTable | not-accessible | current | A list of priority configurations for each application protocol. |
| 1.0.8802.1.1.2.1.5.6945.2.4.2.1 | RowlldpXdcbxFeatAppProtoPrioEntry | not-accessible | current | An entry for selecting priorities for the Application Protocol. |
| 1.0.8802.1.1.2.1.5.6945.2.4.2.1.1 | ColumnlldpXdcbxFeatAppProtoPriority | read-write | current | The priority for which Application Protocol is being configured. |
| 1.0.8802.1.1.2.1.5.6945.2.4.2.1.2 | ColumnlldpXdcbxFeatAppProtoEnableDesired | read-write | current | The locally configured status of Application Protocol for this priority. 0: Disabled 1: Enabled |
| 1.0.8802.1.1.2.1.5.6945.2.4.2.1.3 | ColumnlldpXdcbxFeatAppProtoEnableOper | read-only | current | The operating status of Application Protocol for this priority. NOTE: This value may be different than the locally desired value depending on whether or not th… |
| 1.0.8802.1.1.2.1.5.6945.2.4.2.1.4 | ColumnlldpXdcbxFeatAppProtoEnablePeer | read-only | current | The Application Protocol status that the peer desires to assign to this priority. |
Type Definitions
| Name | Syntax | Status | Description |
|---|---|---|---|
| LldpXdcbxAppProtos | INTEGER (0..15) | current | Number of Application Protocols (TLVs) supported. |
| LldpXdcbxFeatureSubType | INTEGER (0..255) | current | LLDP DCBX Feature Sub Type. |
| LldpXdcbxFeatureType | INTEGER { priorityGroup(2), priorityFlowControl(3), applicationProtocol(4) } | current | Type code of the DCB Feature. Following is a list of defined types: 2 � Priority Groups 3 � Priority Flow Control 4 - Application Protocol |
| LldpXdcbxPgBw | INTEGER (0..100) | current | Priority Group Bandwidth Range. |
| LldpXdcbxPriority | Integer32 (0..7) | current | IEEE 802.1p Priorities. |
| LldpXdcbxPriorityGroup | INTEGER {priorityGroupId0(0), priorityGroupId1(1), priorityGroupId2(2), priorityGroupId3(3), priorityGroupId4(4), priorityGroupId5(5), priorityGroupId6(6), priorityGroupId7(7), reserved8(8), reserved9(9), reserved10(10), reserved11(11), reserved12(12), reserved13(13), reserved14(14), noBandwidthLimit(15)} | current | DCB Priority Groups. |
| LldpXdcbxSF | INTEGER { l2EtherType(0), socketNumber(1), reserved2(2), reserved3(3) } | current | Selector Field to specify Application Protocol ID Type. |
| LldpXdcbxTC | INTEGER (0..7) | current | Traffic Classes Supported. |
| LldpXdcbxTCPeer | INTEGER (0..8) | current | Private Extension: Number of TCs that supported on the peer. |
| LldpXdcbxTCPFC | INTEGER (1..8) | current | Number of TCs that can simultaneously support PFC. |
| LldpXdcbxVersion | INTEGER (0..255) | current | LLDP DCBX Version. |