LLDP-EXT-MED-MIB
97 objects
The LLDP Management Information Base extension module for TIA-TR41.4 media endpoint discovery information. In order to assure the uniqueness of the LLDP-MIB, lldpXMedMIB is branched from lldpExtensions using the TIA OUI value as the node. An OUI/'company_id' is a 24 bit globally unique assigned number referenced by various standards. Copyright (C) TIA (2005). This version of this MIB module is published as Section 13.3 of ANSI/TIA-1057. See the standard itself for full legal notices.
Imported Objects
| DIFFSERV-DSCP-TC | Dscp |
| LLDP-MIB | lldpExtensions lldpLocPortNum lldpPortConfigEntry lldpRemChassisId lldpRemChassisIdSubtype lldpRemIndex lldpRemLocalPortNum lldpRemTimeMark |
| SNMP-FRAMEWORK-MIB | SnmpAdminString |
| SNMPv2-CONF | MODULE-COMPLIANCE NOTIFICATION-GROUP OBJECT-GROUP |
| SNMPv2-SMI | Gauge32 Integer32 MODULE-IDENTITY NOTIFICATION-TYPE OBJECT-TYPE Unsigned32 |
| SNMPv2-TC | TEXTUAL-CONVENTION TruthValue |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.0.8802.1.1.2.1.5.1 | IdentitylldpXMedMIB | The LLDP Management Information Base extension module for TIA-TR41.4 media endpoint discovery information. In order to assure the uniqueness of the LLDP-MIB, l… | ||
| 1.0.8802.1.1.2.1.5.1.0 | NodelldpXMedNotifications | |||
| 1.0.8802.1.1.2.1.5.1.0.1 | NotificationlldpXMedTopologyChangeDetected | current | A notification generated by the local device sensing a change in the topology that indicates that a new remote device attached to a local port, or a remote dev… | |
| 1.0.8802.1.1.2.1.5.1.1 | NodelldpXMedObjects | |||
| 1.0.8802.1.1.2.1.5.1.1.1 | NodelldpXMedConfig | |||
| 1.0.8802.1.1.2.1.5.1.1.1.1 | ScalarlldpXMedLocDeviceClass | read-only | current | Local Device Class. |
| 1.0.8802.1.1.2.1.5.1.1.1.2 | TablelldpXMedPortConfigTable | not-accessible | current | A table that controls selection of LLDP TLVs to be transmitted on individual ports. |
| 1.0.8802.1.1.2.1.5.1.1.1.2.1 | RowlldpXMedPortConfigEntry | not-accessible | current | LLDP configuration information that controls the transmission of the MED organizationally defined TLVs on LLDP transmission capable ports. This configuration o… |
| 1.0.8802.1.1.2.1.5.1.1.1.2.1.1 | ColumnlldpXMedPortCapSupported | read-only | current | The bitmap includes the MED organizationally defined set of LLDP TLVs whose transmission is possible for the respective port on the LLDP agent of the device. E… |
| 1.0.8802.1.1.2.1.5.1.1.1.2.1.2 | ColumnlldpXMedPortConfigTLVsTxEnable | read-write | current | The lldpXMedPortConfigTLVsTxEnable, defined as a bitmap, includes the MED organizationally defined set of LLDP TLVs whose transmission is allowed on the local … |
| 1.0.8802.1.1.2.1.5.1.1.1.2.1.3 | ColumnlldpXMedPortConfigNotifEnable | read-write | current | A value of 'true(1)' enables sending the topology change traps on this port. A value of 'false(2)' disables sending the topology change traps on this port. |
| 1.0.8802.1.1.2.1.5.1.1.1.3 | ScalarlldpXMedFastStartRepeatCount | read-write | current | The number of times the fast start LLDPDU are being sent during the activation of the fast start mechanism defined by LLDP-MED. |
| 1.0.8802.1.1.2.1.5.1.1.2 | NodelldpXMedLocalData | |||
| 1.0.8802.1.1.2.1.5.1.1.2.1 | TablelldpXMedLocMediaPolicyTable | not-accessible | current | This table contains one row per policy type per port of media policy information (as a part of the MED organizational extension) on the local system known to t… |
| 1.0.8802.1.1.2.1.5.1.1.2.1.1 | RowlldpXMedLocMediaPolicyEntry | not-accessible | current | Information about a particular policy on a specific port component. |
| 1.0.8802.1.1.2.1.5.1.1.2.1.1.1 | ColumnlldpXMedLocMediaPolicyAppType | not-accessible | current | The media type that defines the primary function of the application for the policy advertised by an endpoint. |
| 1.0.8802.1.1.2.1.5.1.1.2.1.1.2 | ColumnlldpXMedLocMediaPolicyVlanID | read-only | current | An extension of the VLAN Identifier for the port, as defined in IEEE 802.1P-1998. A value of 1 through 4094 is used to define a valid PVID. A value of 0 shall … |
| 1.0.8802.1.1.2.1.5.1.1.2.1.1.3 | ColumnlldpXMedLocMediaPolicyPriority | read-only | current | This object contains the value of the 802.1p priority which is associated with the given port on the local system. |
| 1.0.8802.1.1.2.1.5.1.1.2.1.1.4 | ColumnlldpXMedLocMediaPolicyDscp | read-only | current | This object contains the value of the Differentiated Service Code Point (DSCP) as defined in IETF RFC 2474 and RFC 2475 which is associated with the given port… |
| 1.0.8802.1.1.2.1.5.1.1.2.1.1.5 | ColumnlldpXMedLocMediaPolicyUnknown | read-only | current | A value of 'true' indicates that the network policy for the specified application type is currently unknown. In this case, the VLAN ID, the layer 2 priority an… |
| 1.0.8802.1.1.2.1.5.1.1.2.1.1.6 | ColumnlldpXMedLocMediaPolicyTagged | read-only | current | A value of 'true' indicates that the application is using a tagged VLAN. A value of 'false' indicates that for the specific application the device either is us… |
| 1.0.8802.1.1.2.1.5.1.1.2.2 | ScalarlldpXMedLocHardwareRev | read-only | current | The vendor-specific hardware revision string as advertised by the endpoint. |
| 1.0.8802.1.1.2.1.5.1.1.2.3 | ScalarlldpXMedLocFirmwareRev | read-only | current | The vendor-specific firmware revision string as advertised by the endpoint. |
| 1.0.8802.1.1.2.1.5.1.1.2.4 | ScalarlldpXMedLocSoftwareRev | read-only | current | The vendor-specific software revision string as advertised by the endpoint. |
| 1.0.8802.1.1.2.1.5.1.1.2.5 | ScalarlldpXMedLocSerialNum | read-only | current | The vendor-specific serial number as advertised by the endpoint. |
| 1.0.8802.1.1.2.1.5.1.1.2.6 | ScalarlldpXMedLocMfgName | read-only | current | The vendor-specific manufacturer name as advertised by the endpoint. |
| 1.0.8802.1.1.2.1.5.1.1.2.7 | ScalarlldpXMedLocModelName | read-only | current | The vendor-specific model name as advertised by the endpoint. |
| 1.0.8802.1.1.2.1.5.1.1.2.8 | ScalarlldpXMedLocAssetID | read-only | current | The vendor-specific asset tracking identifier as advertised by the endpoint. |
| 1.0.8802.1.1.2.1.5.1.1.2.9 | TablelldpXMedLocLocationTable | not-accessible | current | This table contains Location information as advertised by the local system. The information may be configured per port by a Location Information Server (LIS) o… |
| 1.0.8802.1.1.2.1.5.1.1.2.9.1 | RowlldpXMedLocLocationEntry | not-accessible | current | Information about Location information for the local device. |
| 1.0.8802.1.1.2.1.5.1.1.2.9.1.1 | ColumnlldpXMedLocLocationSubtype | not-accessible | current | The location subtype advertised by the local device. |
| 1.0.8802.1.1.2.1.5.1.1.2.9.1.2 | ColumnlldpXMedLocLocationInfo | read-write | current | The location information. Parsing of this information is dependent upon the location subtype, as defined by the value of the lldpXMedLocLocationSubtype object. |
| 1.0.8802.1.1.2.1.5.1.1.2.10 | ScalarlldpXMedLocXPoEDeviceType | read-only | current | Defines the type of Power-via-MDI (Power over Ethernet) advertised by the local device. A value pseDevice(2) indicates that the device is advertised as a Power… |
| 1.0.8802.1.1.2.1.5.1.1.2.11 | TablelldpXMedLocXPoEPSEPortTable | not-accessible | current | This table contains one row per port of PSE PoE information on the local system known to this agent. |
| 1.0.8802.1.1.2.1.5.1.1.2.11.1 | RowlldpXMedLocXPoEPSEPortEntry | not-accessible | current | Information about a particular port PoE information. |
| 1.0.8802.1.1.2.1.5.1.1.2.11.1.1 | ColumnlldpXMedLocXPoEPSEPortPowerAv | read-only | current | This object contains the value of the power available from the PSE via this port expressed in units of 0.1 watts. |
| 1.0.8802.1.1.2.1.5.1.1.2.11.1.2 | ColumnlldpXMedLocXPoEPSEPortPDPriority | read-only | current | Reflects the PD power priority that is being advertised on this PSE port. If both locally configure priority and ldpXMedRemXPoEPDPowerPriority are available on… |
| 1.0.8802.1.1.2.1.5.1.1.2.12 | ScalarlldpXMedLocXPoEPSEPowerSource | read-only | current | Defines the type of PSE Power Source advertised by the local device. A value primary(2) indicates that the device advertises its power source as primary. A val… |
| 1.0.8802.1.1.2.1.5.1.1.2.13 | ScalarlldpXMedLocXPoEPDPowerReq | read-only | current | This object contains the value of the power required by a PD expressed in units of 0.1 watts. |
| 1.0.8802.1.1.2.1.5.1.1.2.14 | ScalarlldpXMedLocXPoEPDPowerSource | read-only | current | Defines the type of Power Source advertised as being used by the local device. A value fromPSE(2) indicates that the device advertises its power source as rece… |
| 1.0.8802.1.1.2.1.5.1.1.2.15 | ScalarlldpXMedLocXPoEPDPowerPriority | read-only | current | Defines the priority advertised as being required by this PD. A value critical(2) indicates that the device advertises its power Priority as critical, as per R… |
| 1.0.8802.1.1.2.1.5.1.1.3 | NodelldpXMedRemoteData | |||
| 1.0.8802.1.1.2.1.5.1.1.3.1 | TablelldpXMedRemCapabilitiesTable | not-accessible | current | A table that displays LLDP-MED capabilities of remote devices connected to individual ports. |
| 1.0.8802.1.1.2.1.5.1.1.3.1.1 | RowlldpXMedRemCapabilitiesEntry | not-accessible | current | LLDP-MED capabilities of remote devices connected to the device ports and communicating via LLDP-MED. The remote tables in the LLDP-MED MIB excepting this tabl… |
| 1.0.8802.1.1.2.1.5.1.1.3.1.1.1 | ColumnlldpXMedRemCapSupported | read-only | current | The bitmap includes the MED organizationally defined set of LLDP TLVs whose transmission is possible on the LLDP agent of the remote device connected to this p… |
| 1.0.8802.1.1.2.1.5.1.1.3.1.1.2 | ColumnlldpXMedRemCapCurrent | read-only | current | The bitmap includes the MED organizationally defined set of LLDP TLVs whose transmission is possible on the LLDP agent of the remote device connected to this p… |
| 1.0.8802.1.1.2.1.5.1.1.3.1.1.3 | ColumnlldpXMedRemDeviceClass | read-only | current | Device Class as advertised by the device remotely connected to the port. |
| 1.0.8802.1.1.2.1.5.1.1.3.2 | TablelldpXMedRemMediaPolicyTable | not-accessible | current | This table contains media policy information as advertised by the remote system. This table may be sparsely populated. Entries in this table are relevant only … |
| 1.0.8802.1.1.2.1.5.1.1.3.2.1 | RowlldpXMedRemMediaPolicyEntry | not-accessible | current | Information about the per port per policy type policy information for a particular physical network connection. |
| 1.0.8802.1.1.2.1.5.1.1.3.2.1.1 | ColumnlldpXMedRemMediaPolicyAppType | not-accessible | current | The media type that defines the primary function of the application for the policy advertised by the endpoint connected remotely to this port. |
| 1.0.8802.1.1.2.1.5.1.1.3.2.1.2 | ColumnlldpXMedRemMediaPolicyVlanID | read-only | current | An extension of the VLAN Identifier for the remote system connected to this port, as defined in IEEE 802.1P-1998. A value of 1 through 4094 is used to define a… |
| 1.0.8802.1.1.2.1.5.1.1.3.2.1.3 | ColumnlldpXMedRemMediaPolicyPriority | read-only | current | This object contains the value of the 802.1p priority which is associated with the remote system connected at given port. |
| 1.0.8802.1.1.2.1.5.1.1.3.2.1.4 | ColumnlldpXMedRemMediaPolicyDscp | read-only | current | This object contains the value of the Differentiated Service Code Point (DSCP) as defined in IETF RFC 2474 and RFC 2475 which is associated with remote system … |
| 1.0.8802.1.1.2.1.5.1.1.3.2.1.5 | ColumnlldpXMedRemMediaPolicyUnknown | read-only | current | A value of 'true' indicates that the network policy for the specified application type is currently unknown. In this case, the VLAN ID, the layer 2 priority an… |
| 1.0.8802.1.1.2.1.5.1.1.3.2.1.6 | ColumnlldpXMedRemMediaPolicyTagged | read-only | current | A value of 'true' indicates that the application is using a tagged VLAN. A value of 'false' indicates that for the specific application the device either is us… |
| 1.0.8802.1.1.2.1.5.1.1.3.3 | TablelldpXMedRemInventoryTable | not-accessible | current | This table contains inventory information as advertised by the remote system. This table may be sparsely populated. Entries in this table are relevant only if … |
| 1.0.8802.1.1.2.1.5.1.1.3.3.1 | RowlldpXMedRemInventoryEntry | not-accessible | current | Information about inventory information for the remote devices connected to the ports. |
| 1.0.8802.1.1.2.1.5.1.1.3.3.1.1 | ColumnlldpXMedRemHardwareRev | read-only | current | The vendor-specific hardware revision string as advertised by the remote endpoint. |
| 1.0.8802.1.1.2.1.5.1.1.3.3.1.2 | ColumnlldpXMedRemFirmwareRev | read-only | current | The vendor-specific firmware revision string as advertised by the remote endpoint. |
| 1.0.8802.1.1.2.1.5.1.1.3.3.1.3 | ColumnlldpXMedRemSoftwareRev | read-only | current | The vendor-specific software revision string as advertised by the remote endpoint. |
| 1.0.8802.1.1.2.1.5.1.1.3.3.1.4 | ColumnlldpXMedRemSerialNum | read-only | current | The vendor-specific serial number as advertised by the remote endpoint. |
| 1.0.8802.1.1.2.1.5.1.1.3.3.1.5 | ColumnlldpXMedRemMfgName | read-only | current | The vendor-specific manufacturer name as advertised by the remote endpoint. |
| 1.0.8802.1.1.2.1.5.1.1.3.3.1.6 | ColumnlldpXMedRemModelName | read-only | current | The vendor-specific model name as advertised by the remote endpoint. |
| 1.0.8802.1.1.2.1.5.1.1.3.3.1.7 | ColumnlldpXMedRemAssetID | read-only | current | The vendor-specific asset tracking identifier as advertised by the remote endpoint. |
| 1.0.8802.1.1.2.1.5.1.1.3.4 | TablelldpXMedRemLocationTable | not-accessible | current | This table contains Location information as advertised by the remote system. This table may be sparsely populated. Entries in this table are relevant only if t… |
| 1.0.8802.1.1.2.1.5.1.1.3.4.1 | RowlldpXMedRemLocationEntry | not-accessible | current | Information about Location information for the remote devices connected to the ports. |
| 1.0.8802.1.1.2.1.5.1.1.3.4.1.1 | ColumnlldpXMedRemLocationSubtype | not-accessible | current | The location subtype advertised by the remote endpoint. |
| 1.0.8802.1.1.2.1.5.1.1.3.4.1.2 | ColumnlldpXMedRemLocationInfo | read-only | current | The location information advertised by the remote endpoint. Parsing of this information is dependent upon the location subtype, as defined by the value of the … |
| 1.0.8802.1.1.2.1.5.1.1.3.5 | TablelldpXMedRemXPoETable | not-accessible | current | This table contains information about the PoE device type as advertised by the remote system. This table is densely populated. |
| 1.0.8802.1.1.2.1.5.1.1.3.5.1 | RowlldpXMedRemXPoEEntry | not-accessible | current | Information about PoE type of the remote devices connected to the ports. |
| 1.0.8802.1.1.2.1.5.1.1.3.5.1.1 | ColumnlldpXMedRemXPoEDeviceType | read-only | current | Defines the type of Power-via-MDI (Power over Ethernet) advertised by the remote device. A value pseDevice(2) indicates that the device is advertised as a Powe… |
| 1.0.8802.1.1.2.1.5.1.1.3.6 | TablelldpXMedRemXPoEPSETable | not-accessible | current | This table contains extended PoE information as advertised by the remote devices of PSE type. This table may be sparsely populated. Entries in this table are r… |
| 1.0.8802.1.1.2.1.5.1.1.3.6.1 | RowlldpXMedRemXPoEPSEEntry | not-accessible | current | Information about Extended PoE PSE information for the remote devices connected to the ports. |
| 1.0.8802.1.1.2.1.5.1.1.3.6.1.1 | ColumnlldpXMedRemXPoEPSEPowerAv | read-only | current | This object contains the value of the power available from the PSE via this port expressed in units of 0.1 watts on the remote device. |
| 1.0.8802.1.1.2.1.5.1.1.3.6.1.2 | ColumnlldpXMedRemXPoEPSEPowerSource | read-only | current | Defines the type of PSE Power Source advertised by the remote device. A value primary(2) indicates that the device advertises its power source as primary. A va… |
| 1.0.8802.1.1.2.1.5.1.1.3.6.1.3 | ColumnlldpXMedRemXPoEPSEPowerPriority | read-only | current | This object contains the value of the PSE power priority advertised by the remote device. A value critical(2) indicates that the device advertises its power pr… |
| 1.0.8802.1.1.2.1.5.1.1.3.7 | TablelldpXMedRemXPoEPDTable | not-accessible | current | This table contains extended PoE information as advertised by the remote devices of PD type. This table may be sparsely populated. Entries in this table are re… |
| 1.0.8802.1.1.2.1.5.1.1.3.7.1 | RowlldpXMedRemXPoEPDEntry | not-accessible | current | Information about XPoEPD information for the remote devices connected to the ports. |
| 1.0.8802.1.1.2.1.5.1.1.3.7.1.1 | ColumnlldpXMedRemXPoEPDPowerReq | read-only | current | This object contains the value of the power required by a PD connected remotely to the port expressed in units of 0.1 watts. |
| 1.0.8802.1.1.2.1.5.1.1.3.7.1.2 | ColumnlldpXMedRemXPoEPDPowerSource | read-only | current | Defines the type of Power Source advertised as being used by the device connected remotely to the port. A value fromPSE(2) indicates that the device advertises… |
| 1.0.8802.1.1.2.1.5.1.1.3.7.1.3 | ColumnlldpXMedRemXPoEPDPowerPriority | read-only | current | Defines the priority advertised as being required by the PD connected remotely to the port. A value critical(2) indicates that the device advertises its power … |
| 1.0.8802.1.1.2.1.5.1.2 | NodelldpXMedConformance | |||
| 1.0.8802.1.1.2.1.5.1.2.1 | NodelldpXMedCompliances | |||
| 1.0.8802.1.1.2.1.5.1.2.1.1 | CompliancelldpXMedCompliance | current | The compliance statement for SNMP entities which implement the LLDP MED extension MIB. | |
| 1.0.8802.1.1.2.1.5.1.2.2 | NodelldpXMedGroups | |||
| 1.0.8802.1.1.2.1.5.1.2.2.1 | GrouplldpXMedConfigGroup | current | The collection of objects which are used to configure or describe the configuration or behavior of the LLDP-MED organizational extension implementation. | |
| 1.0.8802.1.1.2.1.5.1.2.2.2 | GrouplldpXMedOptMediaPolicyGroup | current | The collection of objects which are used to represent LLDP MED organizational extensions for Media Policy Information. | |
| 1.0.8802.1.1.2.1.5.1.2.2.3 | GrouplldpXMedOptInventoryGroup | current | The collection of objects which are used to represent LLDP MED organizational extension for inventory Information. | |
| 1.0.8802.1.1.2.1.5.1.2.2.4 | GrouplldpXMedOptLocationGroup | current | The collection of objects which are used to represent LLDP MED organizational extension for Location Information. | |
| 1.0.8802.1.1.2.1.5.1.2.2.5 | GrouplldpXMedOptPoEPSEGroup | current | The collection of objects which are used to represent LLDP MED organizational extensions for PoE PSE Information. | |
| 1.0.8802.1.1.2.1.5.1.2.2.6 | GrouplldpXMedOptPoEPDGroup | current | The collection of objects which are used to represent LLDP MED organizational extensions for PoE PD Information. | |
| 1.0.8802.1.1.2.1.5.1.2.2.7 | GrouplldpXMedRemSysGroup | current | The collection of objects which are used to represent LLDP- MED organizational extension Remote Device Information. | |
| 1.0.8802.1.1.2.1.5.1.2.2.8 | GrouplldpXMedNotificationsGroup | current | Notifications sent by an LLDP-MED agent. |
Type Definitions
| Name | Syntax | Status | Description |
|---|---|---|---|
| LldpXMedCapabilities | BITS { capabilities(0), networkPolicy(1), location(2), extendedPSE(3), extendedPD(4), inventory(5) } | current | Bitmap that includes the MED organizationally defined set of LLDP TLVs the device is capable of and whose transmission is allowed on the local LLDP agent by network management. Each bit in the bitmap corresponds to an L… |
| LldpXMedDeviceClass | INTEGER { notDefined(0), endpointClass1(1), endpointClass2(2), endpointClass3(3), networkConnectivity(4) } | current | Device Class to which the device is a member. A value of notDefined(0) indicates that the device has capabilities not covered by any of the LLDP-MED classes. A value of endpointClass1(1) indicates that the device has en… |
| LocationSubtype | INTEGER { unknown(1), coordinateBased(2), civicAddress(3), elin(4) } | current | The location subtype advertised by the remote endpoint. A value coordinateBased(2) indicates that the location subtype advertised by the endpoint is defined to use the relevant sub- fields of the DHCP option for Coordin… |
| PolicyAppType | BITS { unknown(0), voice(1), voiceSignaling(2), guestVoice(3), guestVoiceSignaling(4), softPhoneVoice(5), videoconferencing(6), streamingVideo(7), videoSignaling(8) } | current | The media type that defines the primary function of the application for the policy advertised by an endpoint. Having the bit voice(1) set indicates that the media type defining a primary function of the application for … |