MPLS-FRR-FACILITY-STD-MIB
32 objects
Copyright (c) 2011 IETF Trust and the persons identified as authors of the code. All rights reserved. Redistribution and use in source and binary forms, with or without modification, is permitted pursuant to, and subject to the license terms contained in, the Simplified BSD License set forth in Section 4.c of the IETF Trust's Legal Provisions Relating to IETF Documents (http://trustee.ietf.org/license-info). This MIB module contains object definitions for the MPLS Traffic Engineering facility backup method for Fast Reroute as defined in RFC 4090.
Imported Objects
| IF-MIB | InterfaceIndex |
| MPLS-FRR-GENERAL-STD-MIB | mplsFrrGeneralConstraintsGroup mplsFrrGeneralScalarGroup mplsFrrGeneralTunnelARHopGroup |
| MPLS-TC-STD-MIB | MplsBitRate MplsLsrIdentifier MplsTunnelIndex MplsTunnelInstanceIndex |
| SNMPv2-CONF | MODULE-COMPLIANCE NOTIFICATION-GROUP OBJECT-GROUP |
| SNMPv2-SMI | Gauge32 Integer32 mib-2 MODULE-IDENTITY NOTIFICATION-TYPE OBJECT-TYPE |
| SNMPv2-TC | TruthValue |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.2.1.204 | IdentitymplsFrrFacilityMIB | Copyright (c) 2011 IETF Trust and the persons identified as authors of the code. All rights reserved. Redistribution and use in source and binary forms, with o… | ||
| 1.3.6.1.2.1.204.0 | NodemplsFrrFacilityNotifications | |||
| 1.3.6.1.2.1.204.0.1 | NotificationmplsFrrFacilityInitialBackupTunnelInvoked | current | This notification is generated when a tunnel running over an interface as specified in the mplsFrrConstraintsTable is initially protected by the backup tunnel … | |
| 1.3.6.1.2.1.204.0.2 | NotificationmplsFrrFacilityFinalTunnelRestored | current | This notification is generated when the final tunnel that is being protected by a backup tunnel as specified in the mplsFrrConstraintsTable is restored to norm… | |
| 1.3.6.1.2.1.204.1 | NodemplsFrrFacilityObjects | |||
| 1.3.6.1.2.1.204.1.1 | ScalarmplsFrrConfiguredInterfaces | read-only | current | Indicates the number of MPLS interfaces configured for protection. |
| 1.3.6.1.2.1.204.1.2 | ScalarmplsFrrActiveInterfaces | read-only | current | Indicates the number of interfaces currently being protected. This value MUST be less than or equal to mplsFrrConfiguredInterfaces. |
| 1.3.6.1.2.1.204.1.3 | ScalarmplsFrrConfiguredBypassTunnels | read-only | current | Indicates the number of bypass tunnels configured to protect TE tunnels on this LSR. |
| 1.3.6.1.2.1.204.1.4 | ScalarmplsFrrActiveBypassTunnels | read-only | current | Indicates the number of bypass tunnels indicated in mplsFrrConfiguredBypassTunnels whose operStatus is up(1), indicating that they are currently protecting TE … |
| 1.3.6.1.2.1.204.1.5 | ScalarmplsFrrFacilityNotificationsEnabled | read-write | current | Enables or disables FRR notifications defined in this MIB module. Notifications are disabled by default. This object is needed to control the notifications emi… |
| 1.3.6.1.2.1.204.1.6 | ScalarmplsFrrFacilityNotificationsMaxRate | read-write | current | This variable indicates the maximum number of notifications issued per second. If events occur more rapidly, the implementation may simply fail to emit these n… |
| 1.3.6.1.2.1.204.1.7 | TablemplsFrrFacilityDBTable | not-accessible | current | The mplsFrrFacilityDBTable provides information about the fast-reroute database. Each entry belongs to a protected interface, protecting backup tunnel, and pro… |
| 1.3.6.1.2.1.204.1.7.1 | RowmplsFrrFacilityDBEntry | not-accessible | current | An entry in the mplsFrrFacilityDBTable represents a single protected LSP, protected by a backup tunnel on a specific protected interface, or if the interface i… |
| 1.3.6.1.2.1.204.1.7.1.1 | ColumnmplsFrrFacilityProtectedIfIndex | not-accessible | current | Uniquely identifies the interface configured for FRR protection. If this object is set to 0, this indicates that the remaining indexing combinations for this r… |
| 1.3.6.1.2.1.204.1.7.1.2 | ColumnmplsFrrFacilityProtectingTunnelIndex | not-accessible | current | Uniquely identifies the mplsTunnelEntry primary index for the tunnel head interface designated to protect the interface as specified in the mplsFrrFacilityProt… |
| 1.3.6.1.2.1.204.1.7.1.3 | ColumnmplsFrrFacilityBackupTunnelIndex | not-accessible | current | Uniquely identifies the mplsTunnelEntry primary index for the TE tunnel LSP being protected on the interface as specified by mplsFrrFacilityProtectedIfIndex. |
| 1.3.6.1.2.1.204.1.7.1.4 | ColumnmplsFrrFacilityBackupTunnelInstance | not-accessible | current | Uniquely identifies the mplsTunnelEntry secondary index for the TE tunnel LSP being protected on the interface as specified by mplsFrrFacilityProtectedIfIndex. |
| 1.3.6.1.2.1.204.1.7.1.5 | ColumnmplsFrrFacilityBackupTunnelIngressLSRId | not-accessible | current | Uniquely identifies the mplsTunnelEntry third index for the TE tunnel LSP being protected on the interface as specified by mplsFrrFacilityProtectedIfIndex. |
| 1.3.6.1.2.1.204.1.7.1.6 | ColumnmplsFrrFacilityBackupTunnelEgressLSRId | not-accessible | current | Uniquely identifies the mplsTunnelEntry fourth index for the TE tunnel LSP being protected on the interface as specified by mplsFrrFacilityProtectedIfIndex. |
| 1.3.6.1.2.1.204.1.7.1.7 | ColumnmplsFrrFacilityDBNumProtectingTunnelOnIf | read-only | current | The number of backup tunnels protecting the interface specified by mplsFrrFacilityProtectedIfIndex. |
| 1.3.6.1.2.1.204.1.7.1.8 | ColumnmplsFrrFacilityDBNumProtectedLspOnIf | read-only | current | The number of LSPs currently being protected on the interface specified by mplsFrrFacilityProtectedIfIndex. |
| 1.3.6.1.2.1.204.1.7.1.9 | ColumnmplsFrrFacilityDBNumProtectedTunnels | read-only | current | The number of tunnels protected on the interface specified by mplsFrrFacilityProtectedIfIndex. |
| 1.3.6.1.2.1.204.1.7.1.10 | ColumnmplsFrrFacilityDBProtectingTunnelStatus | read-only | current | Specifies the state of the protecting tunnel as specified by mplsFrrFacilityProtectingTunnelIndex. active - This tunnel's label has been placed in the LFIB and… |
| 1.3.6.1.2.1.204.1.7.1.11 | ColumnmplsFrrFacilityDBProtectingTunnelResvBw | read-only | current | Specifies the amount of bandwidth in units of '1,000 bits per second', actually reserved by the protecting tunnel for facility backup purposes. This value is r… |
| 1.3.6.1.2.1.204.2 | NodemplsFrrFacilityConformance | |||
| 1.3.6.1.2.1.204.2.1 | NodemplsFrrFacilityCompliances | |||
| 1.3.6.1.2.1.204.2.1.1 | CompliancemplsFrrFacilityModuleFullCompliance | current | Compliance statements for SNMP engines that support the MPLS-FRR-FACILITY-STD-MIB module. | |
| 1.3.6.1.2.1.204.2.1.2 | CompliancemplsFrrFacilityModuleReadOnlyCompliance | current | Compliance statements for SNMP engines that support the MPLS-FRR-FACILITY-STD-MIB module. | |
| 1.3.6.1.2.1.204.2.2 | NodemplsFrrFacilityGroups | |||
| 1.3.6.1.2.1.204.2.2.1 | GroupmplsFrrFacilityScalarGroup | current | Objects that are required to represent the FRR Facility Route Database information. | |
| 1.3.6.1.2.1.204.2.2.2 | GroupmplsFrrFacilityDBGroup | current | Objects that are required to represent the FRR Facility Route Database information. | |
| 1.3.6.1.2.1.204.2.2.3 | GroupmplsFrrFacilityNotificationsGroup | current | Objects that are required to represent FRR notifications. |