MPLS-FRR-GENERAL-STD-MIB
31 objects
Copyright (c) 2011 IETF Trust and the persons identified as authors of the code. All rights reserved. Redistribution and use in source and binary forms, with or without modification, is permitted pursuant to, and subject to the license terms contained in, the Simplified BSD License set forth in Section 4.c of the IETF Trust's Legal Provisions Relating to IETF Documents (http://trustee.ietf.org/license-info). This MIB module contains generic object definitions for MPLS Traffic Engineering Fast Reroute as defined in RFC 4090.
Imported Objects
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.2.1.202 | IdentitymplsFrrGeneralMIB | Copyright (c) 2011 IETF Trust and the persons identified as authors of the code. All rights reserved. Redistribution and use in source and binary forms, with o… | ||
| 1.3.6.1.2.1.202.1 | NodemplsFrrGeneralObjects | |||
| 1.3.6.1.2.1.202.1.1 | ScalarmplsFrrGeneralProtectionMethod | read-write | current | Indicates which protection method is to be used for fast reroute on this device. Some devices may require a reboot if this variable is to take effect after bei… |
| 1.3.6.1.2.1.202.1.2 | ScalarmplsFrrGeneralIngressTunnelInstances | read-only | current | The number of tunnel instances for either detour LSPs or bypass tunnels for which this LSR is the ingress. |
| 1.3.6.1.2.1.202.1.3 | TablemplsFrrGeneralConstraintsTable | not-accessible | current | This table shows detour LSP or bypass tunnel setup constraints. |
| 1.3.6.1.2.1.202.1.3.1 | RowmplsFrrGeneralConstraintsEntry | not-accessible | current | An entry in this table represents detour LSP or bypass tunnel setup constraints for an interface or link to be protected by detour LSPs or a bypass tunnel. Onc… |
| 1.3.6.1.2.1.202.1.3.1.1 | ColumnmplsFrrGeneralConstraintsIfIndexOrZero | not-accessible | current | Uniquely identifies an interface that a fast-reroute protection tunnel is configured to potentially protect in the event of a fault. Entries with this index se… |
| 1.3.6.1.2.1.202.1.3.1.2 | ColumnmplsFrrGeneralConstraintsTunnelIndex | not-accessible | current | Uniquely identifies a tunnel in the mplsTunnelTable that is configured to possibly protect the interface(s) specified by mplsFrrGeneralConstraintsIfIndexOrZero… |
| 1.3.6.1.2.1.202.1.3.1.3 | ColumnmplsFrrGeneralConstraintsTunnelInstance | not-accessible | current | Uniquely identifies an existing instance of this tunnel for which fast reroute is requested. Note that a value of 0 indicates that the configuration points at … |
| 1.3.6.1.2.1.202.1.3.1.4 | ColumnmplsFrrGeneralConstraintsProtectionType | read-create | current | Indicates type of the resource protection: linkProtection(1) indicates that this tunnel is set up to protect a particular link's resources. nodeProtection(2) i… |
| 1.3.6.1.2.1.202.1.3.1.5 | ColumnmplsFrrGeneralConstraintsSetupPrio | read-create | current | Indicates the setup priority of the detour LSP or bypass tunnel. |
| 1.3.6.1.2.1.202.1.3.1.6 | ColumnmplsFrrGeneralConstraintsHoldingPrio | read-create | current | Indicates the holding priority for the detour LSP or bypass tunnel. |
| 1.3.6.1.2.1.202.1.3.1.7 | ColumnmplsFrrGeneralConstraintsInclAnyAffinity | read-create | current | Indicates the include-any link constraint for the detour LSP or bypass tunnel. A link satisfies the include-any constraint if and only if the constraint is zer… |
| 1.3.6.1.2.1.202.1.3.1.8 | ColumnmplsFrrGeneralConstraintsInclAllAffinity | read-create | current | Indicates the include-all link constraint for the detour LSP or bypass tunnel. A link satisfies the include-all constraint if and only if the link contains all… |
| 1.3.6.1.2.1.202.1.3.1.9 | ColumnmplsFrrGeneralConstraintsExclAnyAffinity | read-create | current | Indicates the exclude-any link constraint for the detour LSP or bypass tunnel. A link satisfies the exclude-any constraint if and only if the link contains non… |
| 1.3.6.1.2.1.202.1.3.1.10 | ColumnmplsFrrGeneralConstraintsHopLimit | read-create | current | The maximum number of hops that the detour LSP or bypass tunnel may traverse. |
| 1.3.6.1.2.1.202.1.3.1.11 | ColumnmplsFrrGeneralConstraintsBandwidth | read-create | current | The maximum bandwidth specifically reserved for a detour LSP or bypass tunnel, in units of thousands of bits per second (kbps). Note that setting this value to… |
| 1.3.6.1.2.1.202.1.3.1.12 | ColumnmplsFrrGeneralConstraintsStorageType | read-create | current | The storage type for this configuration entry. Conceptual rows having the value 'permanent' need not allow write access to any columnar objects in the row. |
| 1.3.6.1.2.1.202.1.3.1.13 | ColumnmplsFrrGeneralConstraintsRowStatus | read-create | current | This object is used to create, modify, and/or delete a row in this table. When a row in this table is in active(1) state, no objects in that row can be modifie… |
| 1.3.6.1.2.1.202.1.4 | TablemplsFrrGeneralTunnelARHopTable | not-accessible | current | This table sparsely extends mplsTunnelARHopTable defined in the MPLS-TE-STD-MIB module with fast-reroute objects. These objects specify the status of local pro… |
| 1.3.6.1.2.1.202.1.4.1 | RowmplsFrrGeneralTunnelARHopEntry | not-accessible | current | This entry contains fast-reroute protection status of a single protected tunnel hop. |
| 1.3.6.1.2.1.202.1.4.1.1 | ColumnmplsFrrGeneralTunnelARHopSessionAttributeFlags | read-only | current | This object indicates the desired values for the associated SESSION_ATTRIBUTE flags. Note that since this object is a BITS type, the bits may be set to indicat… |
| 1.3.6.1.2.1.202.1.4.1.2 | ColumnmplsFrrGeneralTunnelARHopRROSubObjectFlags | read-only | current | This object indicates the flags that are currently in use by the associated Record Route Object (RRO) sub-object. Note that since this object is a BITS type, t… |
| 1.3.6.1.2.1.202.2 | NodemplsFrrGeneralConformance | |||
| 1.3.6.1.2.1.202.2.1 | NodemplsFrrGeneralCompliances | |||
| 1.3.6.1.2.1.202.2.1.1 | CompliancemplsFrrGeneralModuleFullCompliance | current | Compliance statements for SNMP engines that support the MPLS-FRR-GENERAL-STD-MIB module. | |
| 1.3.6.1.2.1.202.2.1.2 | CompliancemplsFrrGeneralModuleReadOnlyCompliance | read-only | current | Compliance statements for SNMP engines that support the MPLS-FRR-GENERAL-STD-MIB module. |
| 1.3.6.1.2.1.202.2.2 | NodemplsFrrGeneralGroups | |||
| 1.3.6.1.2.1.202.2.2.1 | GroupmplsFrrGeneralScalarGroup | current | Objects that are required to display general fast-reroute information. | |
| 1.3.6.1.2.1.202.2.2.2 | GroupmplsFrrGeneralConstraintsGroup | current | Objects that are required to configure fast-reroute constraints at the ingress LSR of the tunnel that requires fast-reroute service. | |
| 1.3.6.1.2.1.202.2.2.3 | GroupmplsFrrGeneralTunnelARHopGroup | current | Objects that are required to present per-hop fast-reroute protection status. |