MPLS-FRR-ONE2ONE-STD-MIB
30 objects
Copyright (c) 2011 IETF Trust and the persons identified as authors of the code. All rights reserved. Redistribution and use in source and binary forms, with or without modification, is permitted pursuant to, and subject to the license terms contained in, the Simplified BSD License set forth in Section 4.c of the IETF Trust's Legal Provisions Relating to IETF Documents (http://trustee.ietf.org/license-info). This MIB module contains object definitions for the MPLS Traffic Engineering one-to-one backup method for Fast Reroute as defined in RFC 4090.
Imported Objects
| INET-ADDRESS-MIB | InetAddress InetAddressType |
| MPLS-FRR-GENERAL-STD-MIB | mplsFrrGeneralConstraintsGroup mplsFrrGeneralScalarGroup mplsFrrGeneralTunnelARHopGroup |
| MPLS-TC-STD-MIB | MplsLsrIdentifier MplsTunnelIndex MplsTunnelInstanceIndex |
| SNMPv2-CONF | MODULE-COMPLIANCE OBJECT-GROUP |
| SNMPv2-SMI | Gauge32 Integer32 mib-2 MODULE-IDENTITY OBJECT-TYPE |
| SNMPv2-TC | TruthValue |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.2.1.203 | IdentitymplsFrrOne2OneMIB | Copyright (c) 2011 IETF Trust and the persons identified as authors of the code. All rights reserved. Redistribution and use in source and binary forms, with o… | ||
| 1.3.6.1.2.1.203.1 | NodemplsFrrOne2OneObjects | |||
| 1.3.6.1.2.1.203.1.1 | ScalarmplsFrrIncomingDetourLSPs | read-only | current | The number of detour LSPs entering the device. |
| 1.3.6.1.2.1.203.1.2 | ScalarmplsFrrOutgoingDetourLSPs | read-only | current | The number of detour LSPs leaving the device. |
| 1.3.6.1.2.1.203.1.3 | ScalarmplsFrrOne2OneDetourOriginating | read-only | current | The number of detour LSPs originating at this PLR. |
| 1.3.6.1.2.1.203.1.4 | ScalarmplsFrrActiveProtectedLSPs | read-only | current | Indicates the number of LSPs currently protected by the FRR feature where this device acts as the PLR for those LSPs. |
| 1.3.6.1.2.1.203.1.5 | TablemplsFrrOne2OnePlrTable | not-accessible | current | This table shows a list of protected TE tunnels with the corresponding protecting tunnel, as well as the PLR where the protecting tunnel that initiated the det… |
| 1.3.6.1.2.1.203.1.5.1 | RowmplsFrrOne2OnePlrEntry | not-accessible | current | An entry in this table represents a protected tunnel LSP together with its detour tunnel instance. An entry in this table is only created by an SNMP engine as … |
| 1.3.6.1.2.1.203.1.5.1.1 | ColumnmplsFrrOne2OnePlrTunnelIndex | not-accessible | current | Uniquely identifies a tunnel between a pair of LSRs from the mplsTunnelEntry. |
| 1.3.6.1.2.1.203.1.5.1.2 | ColumnmplsFrrOne2OnePlrTunnelDetourInstance | not-accessible | current | Uniquely identifies a detour instance of a tunnel from the mplsTunnelEntry. - lower 16 bits : protected tunnel instance - higher 16 bits: detour instance |
| 1.3.6.1.2.1.203.1.5.1.3 | ColumnmplsFrrOne2OnePlrTunnelIngressLSRId | not-accessible | current | The purpose of this object is to uniquely identify a tunnel within a network. When the MPLS signaling protocol is rsvp(2), this object SHOULD contain the same … |
| 1.3.6.1.2.1.203.1.5.1.4 | ColumnmplsFrrOne2OnePlrTunnelEgressLSRId | not-accessible | current | Specifies the egress LSR ID of the protected tunnel instance. |
| 1.3.6.1.2.1.203.1.5.1.5 | ColumnmplsFrrOne2OnePlrId | not-accessible | current | This value represents the PLR that has initiated a detour LSP to protect a tunnel instance. This value is signaled via the DETOUR object defined in MPLS RSVP. |
| 1.3.6.1.2.1.203.1.5.1.6 | ColumnmplsFrrOne2OnePlrSenderAddrType | read-write | current | Denotes the address type of this detour instance's sender address. |
| 1.3.6.1.2.1.203.1.5.1.7 | ColumnmplsFrrOne2OnePlrSenderAddr | read-write | current | The IP address of the PLR that has initiated the detour LSP. The type of this address is determined by the value of the mplsFrrOne2OnePlrSenderAddrType object. |
| 1.3.6.1.2.1.203.1.5.1.8 | ColumnmplsFrrOne2OnePlrAvoidNodeAddrType | read-only | current | Denotes the address type of the node that this PLR tries to avoid. |
| 1.3.6.1.2.1.203.1.5.1.9 | ColumnmplsFrrOne2OnePlrAvoidNodeAddr | read-only | current | The IP address of the node that this PLR tries to avoid. The type of this address is determined by the value of the mplsFrrOne2OnePlrAvoidNodeAddrType object. … |
| 1.3.6.1.2.1.203.1.6 | TablemplsFrrOne2OneDetourTable | not-accessible | current | This table shows detour LSPs. |
| 1.3.6.1.2.1.203.1.6.1 | RowmplsFrrOne2OneDetourEntry | not-accessible | current | An entry in this table represents a detour. An entry in this table is only created by an SNMP engine as instructed by an MPLS signaling protocol. |
| 1.3.6.1.2.1.203.1.6.1.1 | ColumnmplsFrrOne2OneDetourActive | read-only | current | Indicates whether or not the main LSP has switched over to this detour LSP. If the value of this object is 'true', then it means that the main LSP has switched… |
| 1.3.6.1.2.1.203.1.6.1.2 | ColumnmplsFrrOne2OneDetourMergedStatus | read-only | current | This value represents whether or not this detour is merged. This value is set to notMerged(1) if this detour is not merged. This value is set to mergedWithProt… |
| 1.3.6.1.2.1.203.1.6.1.3 | ColumnmplsFrrOne2OneDetourMergedDetourInst | read-only | current | This value represents the mplsTunnelInstance of the detour with which this detour is merged. This object is only valid when mplsFrrOne2OneDetourMergedStatus is… |
| 1.3.6.1.2.1.203.2 | NodemplsFrrOne2OneConformance | |||
| 1.3.6.1.2.1.203.2.1 | NodemplsFrrOne2OneCompliances | |||
| 1.3.6.1.2.1.203.2.1.1 | CompliancemplsFrrOne2OneModuleFullCompliance | current | Compliance statements for SNMP engines that support the MPLS-FRR-ONE2ONE-STD-MIB module. | |
| 1.3.6.1.2.1.203.2.1.2 | CompliancemplsFrrOne2OneModuleReadOnlyCompliance | read-only | current | Compliance statements for SNMP engines that support the MPLS-FRR-ONE2ONE-STD-MIB module. |
| 1.3.6.1.2.1.203.2.2 | NodemplsFrrOne2OneGroups | |||
| 1.3.6.1.2.1.203.2.2.1 | GroupmplsFrrOne2OneScalarsGroup | current | Objects that are required for general One-to-One PLR information. | |
| 1.3.6.1.2.1.203.2.2.2 | GroupmplsFrrOne2OnePLRDetourGroup | current | Objects that are required to present the detour LSP information at the detour ingress, transit, and egress LSRs. | |
| 1.3.6.1.2.1.203.2.2.3 | GroupmplsFrrOne2OnePlrGroup | current | Objects that are required to represent the FRR One-to-One PLR information. |