MPLS-LDP-GENERIC-STD-MIB
17 objects
Copyright (C) The Internet Society (year). The initial version of this MIB module was published in RFC 3815. For full legal notices see the RFC itself or see: http://www.ietf.org/copyrights/ianamib.html This MIB contains managed object definitions for configuring and monitoring the Multiprotocol Label Switching (MPLS), Label Distribution Protocol (LDP), utilizing ethernet as the Layer 2 media.
Imported Objects
| IF-MIB | InterfaceIndexOrZero |
| MPLS-LDP-STD-MIB | mplsLdpEntityIndex mplsLdpEntityLdpId |
| MPLS-TC-STD-MIB | mplsStdMIB |
| SNMPv2-CONF | MODULE-COMPLIANCE OBJECT-GROUP |
| SNMPv2-SMI | MODULE-IDENTITY OBJECT-TYPE Unsigned32 |
| SNMPv2-TC | RowStatus StorageType |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.2.1.10.166.7 | IdentitymplsLdpGenericStdMIB | Copyright (C) The Internet Society (year). The initial version of this MIB module was published in RFC 3815. For full legal notices see the RFC itself or see: … | ||
| 1.3.6.1.2.1.10.166.7.1 | NodemplsLdpGenericObjects | |||
| 1.3.6.1.2.1.10.166.7.1.1 | NodemplsLdpEntityGenericObjects | |||
| 1.3.6.1.2.1.10.166.7.1.1.1 | TablemplsLdpEntityGenericLRTable | not-accessible | current | The MPLS LDP Entity Generic Label Range (LR) Table. The purpose of this table is to provide a mechanism for configurating a contiguous range of generic labels,… |
| 1.3.6.1.2.1.10.166.7.1.1.1.1 | RowmplsLdpEntityGenericLREntry | not-accessible | current | A row in the LDP Entity Generic Label Range (LR) Table. One entry in this table contains information on a single range of labels represented by the configured … |
| 1.3.6.1.2.1.10.166.7.1.1.1.1.1 | ColumnmplsLdpEntityGenericLRMin | not-accessible | current | The minimum label configured for this range. |
| 1.3.6.1.2.1.10.166.7.1.1.1.1.2 | ColumnmplsLdpEntityGenericLRMax | not-accessible | current | The maximum label configured for this range. |
| 1.3.6.1.2.1.10.166.7.1.1.1.1.3 | ColumnmplsLdpEntityGenericLabelSpace | read-create | current | This value of this object is perPlatform(1), then this means that the label space type is per platform. If this object is perInterface(2), then this means that… |
| 1.3.6.1.2.1.10.166.7.1.1.1.1.4 | ColumnmplsLdpEntityGenericIfIndexOrZero | read-create | current | This value represents either the InterfaceIndex of the 'ifLayer' where these Generic Label would be created, or 0 (zero). The value of zero means that the Inte… |
| 1.3.6.1.2.1.10.166.7.1.1.1.1.5 | ColumnmplsLdpEntityGenericLRStorageType | read-create | current | The storage type for this conceptual row. Conceptual rows having the value 'permanent(4)' need not allow write-access to any columnar objects in the row. |
| 1.3.6.1.2.1.10.166.7.1.1.1.1.6 | ColumnmplsLdpEntityGenericLRRowStatus | read-create | current | The status of this conceptual row. All writable objects in this row may be modified at any time, however, as described in detail in the section entitled, 'Chan… |
| 1.3.6.1.2.1.10.166.7.2 | NodemplsLdpGenericConformance | |||
| 1.3.6.1.2.1.10.166.7.2.1 | NodemplsLdpGenericGroups | |||
| 1.3.6.1.2.1.10.166.7.2.1.1 | GroupmplsLdpGenericGroup | current | Objects that apply to all MPLS LDP implementations using Generic Labels as the Layer 2. | |
| 1.3.6.1.2.1.10.166.7.2.2 | NodemplsLdpGenericCompliances | |||
| 1.3.6.1.2.1.10.166.7.2.2.1 | CompliancemplsLdpGenericModuleFullCompliance | current | The Module is implemented with support for read-create and read-write. In other words, both monitoring and configuration are available when using this MODULE-C… | |
| 1.3.6.1.2.1.10.166.7.2.2.2 | CompliancemplsLdpGenericModuleReadOnlyCompliance | read-only | current | The Module is implemented with support for read-only. In other words, only monitoring is available by implementing this MODULE-COMPLIANCE. |