MRV-IR-CHAR-MIB
136 objects
This is the MRV LX Character MIB module.
Imported Objects
| MRV-IR-SYSTEM-MIB | mrvLx TrapSeverity |
| SNMPv2-SMI | Counter32 Integer32 IpAddress MODULE-IDENTITY OBJECT-TYPE |
| SNMPv2-TC | DisplayString |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.33.100.2 | IdentityirCharMib | This is the MRV LX Character MIB module. | ||
| 1.3.6.1.4.1.33.100.2.1 | ScalarirCharNumber | read-only | current | The number of entries in irCharPortTable. |
| 1.3.6.1.4.1.33.100.2.2 | TableirCharPortTable | not-accessible | current | A list of character port entries. |
| 1.3.6.1.4.1.33.100.2.2.1 | RowirCharPortEntry | not-accessible | current | A character port entry. |
| 1.3.6.1.4.1.33.100.2.2.1.1 | ColumnirCharPortIndex | read-only | current | An index value that uniquely identifies a port. |
| 1.3.6.1.4.1.33.100.2.2.1.2 | ColumnirCharPortAccessType | read-write | current | The access type value for the port. |
| 1.3.6.1.4.1.33.100.2.2.1.3 | ColumnirCharPortFlowControl | read-write | current | The flow control mechanism configured for the port. |
| 1.3.6.1.4.1.33.100.2.2.1.4 | ColumnirCharPortStopBits | read-write | current | The number of stop bits configured for the port. |
| 1.3.6.1.4.1.33.100.2.2.1.5 | ColumnirCharPortParity | read-write | current | The parity configured for the port. |
| 1.3.6.1.4.1.33.100.2.2.1.6 | ColumnirCharPortBitsPerChar | read-write | current | The number of bits per character. |
| 1.3.6.1.4.1.33.100.2.2.1.7 | ColumnirCharPortAutoDial | read-only | deprecated | The auto dial setting for the port. This object has been deprecated and will be removed in the next release. |
| 1.3.6.1.4.1.33.100.2.2.1.8 | ColumnirCharPortAutoHangup | read-write | current | The auto hangup setting for the port. |
| 1.3.6.1.4.1.33.100.2.2.1.9 | ColumnirCharPortAutobaud | read-write | current | The autobaud status for the port. |
| 1.3.6.1.4.1.33.100.2.2.1.10 | ColumnirCharPortAutobaudRetry | read-write | current | The autobaud retry interval (in secods). |
| 1.3.6.1.4.1.33.100.2.2.1.11 | ColumnirCharPortInSignalCts | read-only | current | The current value of the input CTS signal. |
| 1.3.6.1.4.1.33.100.2.2.1.12 | ColumnirCharPortInSignalDsr | read-only | current | The current value of the input DSR signal. |
| 1.3.6.1.4.1.33.100.2.2.1.13 | ColumnirCharPortInSignalDcd | read-only | current | The current value of the input DCD signal. |
| 1.3.6.1.4.1.33.100.2.2.1.14 | ColumnirCharPortOutSignalRts | read-write | current | The current value of the output RTS signal. |
| 1.3.6.1.4.1.33.100.2.2.1.15 | ColumnirCharPortOutSignalDtr | read-write | current | The current value of the output DTR signal. |
| 1.3.6.1.4.1.33.100.2.2.1.16 | ColumnirCharPortSpeed | read-write | current | The port speed in bits per second. |
| 1.3.6.1.4.1.33.100.2.2.1.17 | ColumnirCharPortPrompt | read-write | current | An administratively assigned prompt for the port. |
| 1.3.6.1.4.1.33.100.2.2.1.18 | ColumnirCharPortBreak | read-write | current | The break status for the port. |
| 1.3.6.1.4.1.33.100.2.2.1.19 | ColumnirCharPortSpecialBreakString | read-write | current | An administratively assigned special break string for the port. |
| 1.3.6.1.4.1.33.100.2.2.1.20 | ColumnirCharPortSpecialBreak | read-write | current | The special break status for the port. |
| 1.3.6.1.4.1.33.100.2.2.1.21 | ColumnirCharPortInboundAuth | read-write | current | The inbound authentication status for the port. |
| 1.3.6.1.4.1.33.100.2.2.1.22 | ColumnirCharPortOutboundAuth | read-write | current | The outbound authentication status for the port. |
| 1.3.6.1.4.1.33.100.2.2.1.23 | ColumnirCharPortAuthFallback | read-write | current | The Authentication fallback attempts for the port. |
| 1.3.6.1.4.1.33.100.2.2.1.24 | ColumnirCharPortRadiusAcct | read-write | current | The Radius accounting status for the port. |
| 1.3.6.1.4.1.33.100.2.2.1.25 | ColumnirCharPortTacacsAcct | read-write | current | The Tacacs accounting status for the port. |
| 1.3.6.1.4.1.33.100.2.2.1.26 | ColumnirCharPortTransparent | read-write | current | The transparent status for the port. |
| 1.3.6.1.4.1.33.100.2.2.1.27 | ColumnirCharPortDataBufferSize | read-write | current | An administratively assigned data buffer log size |
| 1.3.6.1.4.1.33.100.2.2.1.28 | ColumnirCharPortDataBufferSyslog | read-write | current | The data buffer syslog status for the port. |
| 1.3.6.1.4.1.33.100.2.2.1.29 | ColumnirCharPortDataBufferDisplay | read-write | current | The data buffer display status for the port. |
| 1.3.6.1.4.1.33.100.2.2.1.30 | ColumnirCharPortDataBufferTimeStamp | read-write | current | The data buffer time stamp status for the port. |
| 1.3.6.1.4.1.33.100.2.2.1.31 | ColumnirCharPortTelnetPort | read-only | current | The configured port used to telnet to the device attached to this port. |
| 1.3.6.1.4.1.33.100.2.2.1.32 | ColumnirCharPortSshPort | read-only | current | The configured port used to SSH to the device attached to this port. |
| 1.3.6.1.4.1.33.100.2.3 | TableirCharPortStatsTable | not-accessible | current | A list of character port stats entries. |
| 1.3.6.1.4.1.33.100.2.3.1 | RowirCharPortStatsEntry | not-accessible | current | A character port stats entry. |
| 1.3.6.1.4.1.33.100.2.3.1.1 | ColumnirCharPortTransmitBytes | read-only | current | The number of bytes transmitted on the port. |
| 1.3.6.1.4.1.33.100.2.3.1.2 | ColumnirCharPortReceiveBytes | read-only | current | The number of bytes received on the port. |
| 1.3.6.1.4.1.33.100.2.3.1.3 | ColumnirCharPortFrameErrors | read-only | current | The number of frame errors on the port. |
| 1.3.6.1.4.1.33.100.2.3.1.4 | ColumnirCharPortOverrunErrors | read-only | current | The number of overrun errors on the port. |
| 1.3.6.1.4.1.33.100.2.3.1.5 | ColumnirCharPortParityErrors | read-only | current | The number of parity errors on the port. |
| 1.3.6.1.4.1.33.100.2.4 | TableirTempSensorTable | not-accessible | current | List of temperature sensor entries. |
| 1.3.6.1.4.1.33.100.2.4.1 | RowirTempSensorEntry | not-accessible | current | A temp sensor entry. |
| 1.3.6.1.4.1.33.100.2.4.1.1 | ColumnirTempPortIndex | read-only | current | The port on which the temp sensor is configured. |
| 1.3.6.1.4.1.33.100.2.4.1.2 | ColumnirTempSensorIndex | read-only | current | A unique value that identifies a specific configured temp sensor. |
| 1.3.6.1.4.1.33.100.2.4.1.3 | ColumnirTempValue | read-only | current | The current temperature value. |
| 1.3.6.1.4.1.33.100.2.4.1.4 | ColumnirTempValueUnits | read-write | current | This object indicates the units for the temperature value. |
| 1.3.6.1.4.1.33.100.2.4.1.5 | ColumnirTempThresholdHigh | read-write | current | The high temperature threhsold value. |
| 1.3.6.1.4.1.33.100.2.4.1.6 | ColumnirTempThresholdLow | read-write | current | The low temperature threhsold value. |
| 1.3.6.1.4.1.33.100.2.4.1.7 | ColumnirTempTrapSeverity | read-write | current | The severity value to be sent in the threshold trap. |
| 1.3.6.1.4.1.33.100.2.4.1.8 | ColumnirTempHysteresis | read-write | current | After crossing a threshold, the delta by which the caliberated value must drop within the normal range before the alarm condition is cleared (i.e. a cleared al… |
| 1.3.6.1.4.1.33.100.2.5 | TableirHumiditySensorTable | not-accessible | current | A list of humidity sensor entries. |
| 1.3.6.1.4.1.33.100.2.5.1 | RowirHumiditySensorEntry | not-accessible | current | A humidity sensor entry. |
| 1.3.6.1.4.1.33.100.2.5.1.1 | ColumnirHumidityPortIndex | read-only | current | The port on which the humidity sensor is configured. |
| 1.3.6.1.4.1.33.100.2.5.1.2 | ColumnirHumiditySensorIndex | read-only | current | A unique value that identifies a specific configured humidity sensor. |
| 1.3.6.1.4.1.33.100.2.5.1.3 | ColumnirHumidityValue | read-only | current | The current humidity value (as a percentage). |
| 1.3.6.1.4.1.33.100.2.5.1.4 | ColumnirHumidityThresholdHigh | read-write | current | The high humidity threhsold value. |
| 1.3.6.1.4.1.33.100.2.5.1.5 | ColumnirHumidityThresholdLow | read-write | current | The low humidity threhsold value. |
| 1.3.6.1.4.1.33.100.2.5.1.6 | ColumnirHumidityTrapSeverity | read-write | current | The severity value to be sent in the threshold trap. |
| 1.3.6.1.4.1.33.100.2.5.1.7 | ColumnirHumidityHysteresis | read-write | current | After crossing a threshold, the delta by which the caliberated value must drop within the normal range before the alarm condition is cleared (i.e. a cleared al… |
| 1.3.6.1.4.1.33.100.2.6 | TableirPowerTable | not-accessible | current | A list of power port entries. |
| 1.3.6.1.4.1.33.100.2.6.1 | RowirPowerEntry | not-accessible | current | A power port config entry. |
| 1.3.6.1.4.1.33.100.2.6.1.1 | ColumnirPowerModuleType | read-only | current | The type of power module attached to the power port. |
| 1.3.6.1.4.1.33.100.2.6.1.2 | ColumnirPowerCurrentLoad | read-only | current | An Ascii string indicating the total unit current load, in Amps. |
| 1.3.6.1.4.1.33.100.2.6.1.4 | ColumnirPowerOutletCount | read-only | current | The number of power outlets on the module. |
| 1.3.6.1.4.1.33.100.2.6.1.5 | ColumnirPowerCurrentLoadA | read-only | current | An Ascii string indicating the current load, in Amps, of input feed A. Note that this info is available only on certain models. A value of 'N/A' indicates that… |
| 1.3.6.1.4.1.33.100.2.6.1.6 | ColumnirPowerCurrentLoadB | read-only | current | An Ascii string indicating the current load, in Amps, of input feed B. Note that this info is available only on certain models. A value of 'N/A' indicates that… |
| 1.3.6.1.4.1.33.100.2.6.1.7 | ColumnirPowerCurrentLoadC | read-only | current | An Ascii string indicating the current load, in Amps, of input feed C. Note that this info is available only on certain models. A value of 'N/A' indicates that… |
| 1.3.6.1.4.1.33.100.2.7 | TableirPowerOutletTable | not-accessible | current | A list of Power Outlet entries. |
| 1.3.6.1.4.1.33.100.2.7.1 | RowirPowerOutletEntry | not-accessible | current | A power outlet entry. |
| 1.3.6.1.4.1.33.100.2.7.1.1 | ColumnirPowerPortIndex | read-only | current | An index which uniquely identifies a physical power port. |
| 1.3.6.1.4.1.33.100.2.7.1.2 | ColumnirPowerOutletIndex | read-only | current | An index which uniquely identifies an outlet on a power outlet port. |
| 1.3.6.1.4.1.33.100.2.7.1.3 | ColumnirPowerOutletName | read-write | current | A name used to identify this power outlet. |
| 1.3.6.1.4.1.33.100.2.7.1.4 | ColumnirPowerOutletStatus | read-only | current | The status of the power outlet. |
| 1.3.6.1.4.1.33.100.2.7.1.5 | ColumnirPowerOutletAction | read-write | current | A read of this object always returns the value other(1). Setting it to one of the other values causes the corresponding action to take place. |
| 1.3.6.1.4.1.33.100.2.7.1.6 | ColumnirPowerOutletCurrentLoad | read-only | current | An Ascii string indicating the current load, in Amps, for this outlet. A value of 'N/A' indicates that this information is not available. |
| 1.3.6.1.4.1.33.100.2.8 | TableirTcpPipeTable | not-accessible | current | A list of TcpPipe port entries. |
| 1.3.6.1.4.1.33.100.2.8.1 | RowirTcpPipeEntry | not-accessible | current | A TcpPipe port config entry. |
| 1.3.6.1.4.1.33.100.2.8.1.1 | ColumnirTcpPipeRemoteIpAddress | read-write | current | The IP address of the remote end of the TCP connection. |
| 1.3.6.1.4.1.33.100.2.8.1.2 | ColumnirTcpPipeRemoteTcpPort | read-write | current | The TCP port number for the remote end of the TCP connection. |
| 1.3.6.1.4.1.33.100.2.8.1.3 | ColumnirTcpPipeWindowSize | read-write | current | The TCP window size to use for the TCP connection. |
| 1.3.6.1.4.1.33.100.2.8.1.4 | ColumnirTcpPipeConnRetryCount | read-write | current | The TCP connection retry count to use for the TCP connection. |
| 1.3.6.1.4.1.33.100.2.8.1.5 | ColumnirTcpPipeConnStatus | read-only | current | The TCP connection status. |
| 1.3.6.1.4.1.33.100.2.9 | NodeirModem | |||
| 1.3.6.1.4.1.33.100.2.9.1 | TableirModemCfgTable | not-accessible | current | A list of modem config entries. |
| 1.3.6.1.4.1.33.100.2.9.1.1 | RowirModemCfgEntry | not-accessible | current | A modem config entry. |
| 1.3.6.1.4.1.33.100.2.9.1.1.1 | ColumnirModemIndex | read-only | current | An index value that uniquely identifies a modem. |
| 1.3.6.1.4.1.33.100.2.9.1.1.2 | ColumnirModemTimeout | read-write | current | The number of seconds to wait to detect remote end setting DSR signal high before giving up trying to establish a call. |
| 1.3.6.1.4.1.33.100.2.9.1.1.3 | ColumnirModemRetry | read-write | current | The number of times to try establishing a call. |
| 1.3.6.1.4.1.33.100.2.9.1.1.4 | ColumnirModemState | read-write | current | This indicates whether the modem is enabled or disabled on a port. |
| 1.3.6.1.4.1.33.100.2.9.1.1.5 | ColumnirModemPooling | read-write | current | This indicates whether modem pooling is enabled or disabled. |
| 1.3.6.1.4.1.33.100.2.9.1.1.6 | ColumnirModemDialNumber | read-write | current | The phone number to dial when setting up a call. |
| 1.3.6.1.4.1.33.100.2.9.1.1.7 | ColumnirModemInitString | read-write | current | The modem initialisation string. |
| 1.3.6.1.4.1.33.100.2.9.2 | ScalarirInternalModemPort | read-only | current | The physical port to which an internal modem is attached. A value of 0 indicates there is no internal modem present. |
| 1.3.6.1.4.1.33.100.2.9.3 | ScalarirInternalModemType | read-only | current | The type of modem module installed in the system. |
| 1.3.6.1.4.1.33.100.2.10 | TableirLdAlarmConfigTable | not-accessible | current | A list of ldam alarm port config entries. |
| 1.3.6.1.4.1.33.100.2.10.1 | RowirLdAlarmConfigEntry | not-accessible | current | An ldam alarm port config entry. |
| 1.3.6.1.4.1.33.100.2.10.1.1 | ColumnirLdAlarmPortIndex | read-only | current | The alarm port index. |
| 1.3.6.1.4.1.33.100.2.10.1.2 | ColumnirLdAlarmPointIndex | read-only | current | An integer which uniquely identifies an alarm point on this port. |
| 1.3.6.1.4.1.33.100.2.10.1.3 | ColumnirLdAlarmName | read-write | current | The name assigned to the alarm point. |
| 1.3.6.1.4.1.33.100.2.10.1.4 | ColumnirLdAlarmDescription | read-write | current | A user configurable alarm point description string. |
| 1.3.6.1.4.1.33.100.2.10.1.5 | ColumnirLdAlarmContactState | read-only | current | The current state of the alarm point contacts. |
| 1.3.6.1.4.1.33.100.2.10.1.6 | ColumnirLdAlarmContactFaultState | read-write | current | The contact state (open or closed) which indicates the fault condition. If the value of this object and irLdAlarmContactState is the same, then the alarm point… |
| 1.3.6.1.4.1.33.100.2.10.1.7 | ColumnirLdAlarmTrapStatus | read-write | current | This indicates whether an snmp trap will be generated when this alarm point is generated. |
| 1.3.6.1.4.1.33.100.2.10.1.8 | ColumnirLdAlarmTrapSeverity | read-write | current | The trap severity assigned to this alarm point. This value will be sent when an alarm fires and an snmp trap is generated. |
| 1.3.6.1.4.1.33.100.2.10.1.9 | ColumnirLdAlarmCount | read-only | current | The number of times the alarm point has been generated since the LX was started. |
| 1.3.6.1.4.1.33.100.2.10.1.10 | ColumnirLdAlarmTimestamp | read-only | current | A timestamp string indicating the time the last alarm was generated. A null string indicates that the alarm point has not been triggered. |
| 1.3.6.1.4.1.33.100.2.11 | TableirLdControlConfigTable | not-accessible | current | A list of ldam control port config entries. |
| 1.3.6.1.4.1.33.100.2.11.1 | RowirLdControlConfigEntry | not-accessible | current | An ldam control port config entry. |
| 1.3.6.1.4.1.33.100.2.11.1.1 | ColumnirLdControlPortIndex | read-only | current | The control port index. |
| 1.3.6.1.4.1.33.100.2.11.1.2 | ColumnirLdControlPointIndex | read-only | current | An integer which uniquely identifies a control point on this port. |
| 1.3.6.1.4.1.33.100.2.11.1.3 | ColumnirLdControlName | read-write | current | The name assigned to the control point. |
| 1.3.6.1.4.1.33.100.2.11.1.4 | ColumnirLdControlDescription | read-write | current | A user configurable control point description string. |
| 1.3.6.1.4.1.33.100.2.11.1.5 | ColumnirLdControlState | read-write | current | The configured control state (deassert or assert). |
| 1.3.6.1.4.1.33.100.2.11.1.6 | ColumnirLdControlEnergizedState | read-write | current | The configured energized state (deassert or assert). If the value of this object and irLdControlState is the same, then the operational state will be on. |
| 1.3.6.1.4.1.33.100.2.12 | TableirRs485PortTable | not-accessible | current | A list of RS485 character port entries. |
| 1.3.6.1.4.1.33.100.2.12.1 | RowirRs485PortEntry | not-accessible | current | An RS485 character port entry. |
| 1.3.6.1.4.1.33.100.2.12.1.1 | ColumnirRs485PortIndex | read-only | current | An index value that uniquely identifies an RS485 port. This value maps to the same index in the irCharPortTable. |
| 1.3.6.1.4.1.33.100.2.12.1.2 | ColumnirRs485PortDuplexMode | read-write | current | The duplex mode for this RS485 port. |
| 1.3.6.1.4.1.33.100.2.12.1.3 | ColumnirRs485PortEchoMode | read-write | current | The echo mode for this RS4585 port. This is used when irRs485PortDuplexMode object is set to half(2). |
| 1.3.6.1.4.1.33.100.2.12.1.4 | ColumnirRs485PortTransmitter | read-write | current | The transmitter setting for this RS4585 port. This is used when irRs485PortDuplexMode object is set to full(1). |
| 1.3.6.1.4.1.33.100.2.13 | TableirGsmPortTable | not-accessible | current | A list of GSM/GPRS port entries. |
| 1.3.6.1.4.1.33.100.2.13.1 | RowirGsmPortEntry | not-accessible | current | An GSM/GPRS port entry. |
| 1.3.6.1.4.1.33.100.2.13.1.1 | ColumnirGsmPortIndex | read-only | current | An index value that uniquely identifies an GSM/GPRS port. This value maps to the same index in the irCharPortTable. |
| 1.3.6.1.4.1.33.100.2.13.1.2 | ColumnirGsmPortRcvSigStrength | read-only | current | The received signal strenth. |
| 1.3.6.1.4.1.33.100.2.13.1.3 | ColumnirGsmPortBitErrorRate | read-only | current | The port bit error rate. |
| 1.3.6.1.4.1.33.100.2.14 | TableirUpsTable | not-accessible | current | A list of ups entries. |
| 1.3.6.1.4.1.33.100.2.14.1 | RowirUpsEntry | not-accessible | current | A ups entry. |
| 1.3.6.1.4.1.33.100.2.14.1.1 | ColumnirUpsType | read-write | current | The ups type. It indicates the protocol used to communicate with the ups. A value of smart(1) means use Ascii based commands. A value of simple(2) means use RS… |
| 1.3.6.1.4.1.33.100.2.14.1.2 | ColumnirUpsStatus | read-only | current | The ups status. A value of offline(1) indicates the ups is not providing power to the attached devices. A value of online(2) indicates the ups is providing pow… |
| 1.3.6.1.4.1.33.100.2.14.1.3 | ColumnirUpsModel | read-only | current | The ups model. |
| 1.3.6.1.4.1.33.100.2.14.1.4 | ColumnirUpsCharge | read-only | current | The ups charge, as a percentage. |
| 1.3.6.1.4.1.33.100.2.14.1.5 | ColumnirUpsLoad | read-only | current | The current load, as a percentage. |
| 1.3.6.1.4.1.33.100.2.14.1.6 | ColumnirUpsLife | read-only | current | The ups life (time remaining), in minutes. |