MRV-IR-HDAM-MIB
73 objects
This is the MRV LX HDAM Alarm MIB module.
Imported Objects
| MRV-IR-SYSTEM-MIB | TrapSeverity |
| SNMPv2-SMI | Counter32 enterprises MODULE-IDENTITY OBJECT-TYPE |
| SNMPv2-TC | DisplayString |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.33 | NodemrvBpd | |||
| 1.3.6.1.4.1.33.100 | NodemrvLx | |||
| 1.3.6.1.4.1.33.100.4 | IdentityirHdamMib | This is the MRV LX HDAM Alarm MIB module. | ||
| 1.3.6.1.4.1.33.100.4.1 | NodeirHdam | |||
| 1.3.6.1.4.1.33.100.4.1.1 | TableirHdamUnitTable | not-accessible | current | A list of hdam unit entries. |
| 1.3.6.1.4.1.33.100.4.1.1.1 | RowirHdamUnitEntry | not-accessible | current | An hdam unit entry. |
| 1.3.6.1.4.1.33.100.4.1.1.1.1 | ColumnirHdamUnitPortIndex | read-only | current | The port index to which this hdam unit is connected. |
| 1.3.6.1.4.1.33.100.4.1.1.1.2 | ColumnirHdamFwVersion | read-only | current | The HDAM unit firmware version string. |
| 1.3.6.1.4.1.33.100.4.1.1.1.3 | ColumnirHdamConnectStatus | read-only | current | The HDAM unit connection status. |
| 1.3.6.1.4.1.33.100.4.1.1.1.4 | ColumnirHdamPowerType | read-only | current | The type of power used by the hdam device. |
| 1.3.6.1.4.1.33.100.4.1.1.1.5 | ColumnirHdamAction | read-write | current | This object is used to perform an action on the HDAM unit. A read of this object always returns the value other(1). Setting this object to reset(2) causes the … |
| 1.3.6.1.4.1.33.100.4.1.2 | TableirHdamModuleTable | not-accessible | current | A list of hdam module entries. |
| 1.3.6.1.4.1.33.100.4.1.2.1 | RowirHdamModuleEntry | not-accessible | current | An hdam module entry. |
| 1.3.6.1.4.1.33.100.4.1.2.1.1 | ColumnirHdamPortIndex | read-only | current | The port index to which this hdam unit is connected. |
| 1.3.6.1.4.1.33.100.4.1.2.1.2 | ColumnirHdamSlotIndex | read-only | current | The slot index for this module entry. |
| 1.3.6.1.4.1.33.100.4.1.2.1.3 | ColumnirHdamModuleType | read-only | current | The type of module in the slot. |
| 1.3.6.1.4.1.33.100.4.1.3 | TableirHdamPowerSupplyTable | not-accessible | current | A list of hdam power supply entries. |
| 1.3.6.1.4.1.33.100.4.1.3.1 | RowirHdamPowerSupplyEntry | not-accessible | current | An hdam power supply entry. |
| 1.3.6.1.4.1.33.100.4.1.3.1.1 | ColumnirHdamPowerPortIndex | read-only | current | The index of the port to which the hdam unit is attached. |
| 1.3.6.1.4.1.33.100.4.1.3.1.2 | ColumnirHdamPowerIndex | read-only | current | The index of the hdam power unit. |
| 1.3.6.1.4.1.33.100.4.1.3.1.3 | ColumnirHdamPowerUnitPresent | read-only | current | This indicates if the power unit is present or not. |
| 1.3.6.1.4.1.33.100.4.1.3.1.4 | ColumnirHdamPowerInputStatus | read-only | current | This indicates if the power unit is plugged into a power source. |
| 1.3.6.1.4.1.33.100.4.1.3.1.5 | ColumnirHdamPowerOutputStatus | read-only | current | This indicates the status of the internal power feed to the device components. |
| 1.3.6.1.4.1.33.100.4.1.3.1.6 | ColumnirHdamPowerStatus | read-only | current | The overall status of the power unit. |
| 1.3.6.1.4.1.33.100.4.2 | NodeirHdamAlarm | |||
| 1.3.6.1.4.1.33.100.4.2.1 | TableirAlarmConfigTable | not-accessible | current | A list of alarm config entries. |
| 1.3.6.1.4.1.33.100.4.2.1.1 | RowirAlarmConfigEntry | not-accessible | current | An hdam alarm config entry. |
| 1.3.6.1.4.1.33.100.4.2.1.1.1 | ColumnirAlarmPortIndex | read-only | current | The port index on which the alarm unit is attached. |
| 1.3.6.1.4.1.33.100.4.2.1.1.2 | ColumnirAlarmSlotIndex | read-only | current | The slot in the alarm unit which identifies this module. |
| 1.3.6.1.4.1.33.100.4.2.1.1.3 | ColumnirAlarmPointIndex | read-only | current | An integer which uniquely identifies an alarm on this module. |
| 1.3.6.1.4.1.33.100.4.2.1.1.4 | ColumnirAlarmName | read-write | current | The name assigned to the alarm. |
| 1.3.6.1.4.1.33.100.4.2.1.1.5 | ColumnirAlarmContactState | read-only | current | The current state of the alarm contacts. |
| 1.3.6.1.4.1.33.100.4.2.1.1.6 | ColumnirAlarmContactFaultState | read-write | current | The contact state (open or closed) which indicates the fault condition. If the value of this object and irAlarmContactState is the same, then the alarm has bee… |
| 1.3.6.1.4.1.33.100.4.2.1.1.7 | ColumnirAlarmDebounceInterval | read-write | current | The number of seconds the alarm must be in the fault state before it is considered valid. |
| 1.3.6.1.4.1.33.100.4.2.1.1.8 | ColumnirAlarmAudibleStatus | read-write | current | This indicates whether the audible alarm on the unit will sound when this alarm is generated. |
| 1.3.6.1.4.1.33.100.4.2.1.1.9 | ColumnirAlarmTrapStatus | read-write | current | This indicates whether an snmp trap will be generated when this alarm is generated. |
| 1.3.6.1.4.1.33.100.4.2.1.1.10 | ColumnirAlarmTrapSeverity | read-write | current | The trap severity assigned to this alarm. This value will be sent when an alarm fires and an snmp trap is generated. |
| 1.3.6.1.4.1.33.100.4.2.1.1.11 | ColumnirAlarmCount | read-only | current | The number of times the alarm has been generated since the unit was started. |
| 1.3.6.1.4.1.33.100.4.2.1.1.12 | ColumnirAlarmTimestamp | read-only | current | A timestamp string indicating the time the last alarm was generated. A null string indicates that the alarm has not been generated. |
| 1.3.6.1.4.1.33.100.4.2.1.1.13 | ColumnirAlarmDescription | read-write | current | A user configurable alarm description string. |
| 1.3.6.1.4.1.33.100.4.3 | NodeirHdamControl | |||
| 1.3.6.1.4.1.33.100.4.3.1 | TableirControlConfigTable | not-accessible | current | A list of control config entries. |
| 1.3.6.1.4.1.33.100.4.3.1.1 | RowirControlConfigEntry | not-accessible | current | A control config entry. |
| 1.3.6.1.4.1.33.100.4.3.1.1.1 | ColumnirControlPortIndex | read-only | current | The port index on which the control unit is attached. |
| 1.3.6.1.4.1.33.100.4.3.1.1.2 | ColumnirControlSlotIndex | read-only | current | The slot in the control unit which identifies this module. |
| 1.3.6.1.4.1.33.100.4.3.1.1.3 | ColumnirControlPointIndex | read-only | current | An integer which uniquely identifies a control on this module. |
| 1.3.6.1.4.1.33.100.4.3.1.1.4 | ColumnirControlName | read-write | current | The name assigned to the control. |
| 1.3.6.1.4.1.33.100.4.3.1.1.5 | ColumnirControlState | read-write | current | The current value of the control state. |
| 1.3.6.1.4.1.33.100.4.3.1.1.6 | ColumnirControlActiveState | read-write | current | The value of the control state that activates the attached device. |
| 1.3.6.1.4.1.33.100.4.3.1.1.7 | ColumnirControlDescription | read-write | current | A user configurable control description string. |
| 1.3.6.1.4.1.33.100.4.4 | NodeirHdamAnalog | |||
| 1.3.6.1.4.1.33.100.4.4.1 | TableirAnalogConfigTable | not-accessible | current | A list of analog loop config entries. |
| 1.3.6.1.4.1.33.100.4.4.1.1 | RowirAnalogConfigEntry | not-accessible | current | An analog loop config entry. |
| 1.3.6.1.4.1.33.100.4.4.1.1.1 | ColumnirAnalogPortIndex | read-only | current | The port index on which the analog unit is attached. |
| 1.3.6.1.4.1.33.100.4.4.1.1.2 | ColumnirAnalogSlotIndex | read-only | current | The slot in the analog unit which identifies this module. |
| 1.3.6.1.4.1.33.100.4.4.1.1.3 | ColumnirAnalogPointIndex | read-only | current | An integer which uniquely identifies an analog point on this module. |
| 1.3.6.1.4.1.33.100.4.4.1.1.4 | ColumnirAnalogName | read-write | current | The name assigned to the analog. |
| 1.3.6.1.4.1.33.100.4.4.1.1.5 | ColumnirAnalogDescription | read-write | current | A user configurable analog description string. |
| 1.3.6.1.4.1.33.100.4.4.1.1.6 | ColumnirAnalogStatus | read-write | current | The status of the analog point. |
| 1.3.6.1.4.1.33.100.4.4.1.1.7 | ColumnirAnalogValue | read-only | current | The current analog sensor reading in milliAmps. |
| 1.3.6.1.4.1.33.100.4.4.1.1.8 | ColumnirAnalogCalValue | read-only | current | The current analog sensor calibrated value. |
| 1.3.6.1.4.1.33.100.4.4.1.1.9 | ColumnirAnalogCalMinValue | read-write | current | The calibration value assigned to the minimum sensor reading. |
| 1.3.6.1.4.1.33.100.4.4.1.1.10 | ColumnirAnalogCalMaxValue | read-write | current | The calibration value assigned to the maximum analog sensor reading. |
| 1.3.6.1.4.1.33.100.4.4.1.1.11 | ColumnirAnalogCalMargin | read-write | current | The calibration margin value. This will be added to the calibrated analog sensor value. |
| 1.3.6.1.4.1.33.100.4.4.1.1.12 | ColumnirAnalogCalUnits | read-write | current | A user defined string describing the calibrated units for the analog sensor. |
| 1.3.6.1.4.1.33.100.4.4.1.1.13 | ColumnirAnalogThresholdHigh | read-write | current | The analog sensor high threshold value. A value of -0 indicates threshold is not configured. |
| 1.3.6.1.4.1.33.100.4.4.1.1.14 | ColumnirAnalogThresholdLow | read-write | current | The analog sensor low threshold value. A value of -0 indicates threshold is not configured. |
| 1.3.6.1.4.1.33.100.4.4.1.1.15 | ColumnirAnalogThresholdSeverity | read-write | current | The severity value of the analog sensor assigned to the low threshold. This value will be sent in the threshold trap. |
| 1.3.6.1.4.1.33.100.4.4.1.1.16 | ColumnirAnalogThresholdHysteresis | read-write | current | After crossing a threshold, the delta by which the caliberated value must drop within the normal range before the alarm condition is cleared (i.e. a cleared al… |
| 1.3.6.1.4.1.33.100.4.4.1.1.17 | ColumnirAnalogThresholdHighAlarmCount | read-only | current | The number of times the analog sensor high threshold has been crossed since the unit was started. |
| 1.3.6.1.4.1.33.100.4.4.1.1.18 | ColumnirAnalogThresholdLowAlarmCount | read-only | current | The number of times the analog sensor low threshold has been crossed since the unit was started. |
| 1.3.6.1.4.1.33.100.4.4.1.1.19 | ColumnirAnalogThresholdHighTimestamp | read-only | current | A timestamp string indicating the time the analog sensor last crossed the high threshold. A null string indicates that the alarm has not been crossed. |
| 1.3.6.1.4.1.33.100.4.4.1.1.20 | ColumnirAnalogThresholdLowTimestamp | read-only | current | A timestamp string indicating the time the analog sensor last crossed the low threshold. A null string indicates that the alarm has not been crossed. |