MWRM-NETWORK-MIB
1435 objects
No module-level DESCRIPTION found.
Imported Objects
| IPV6-TC | -- Ipv6Address |
| MWRM-UNIT-MIB | AllowedNotAllowed BerLevel ClockSrc DownUp EnableDisable EnableDisableSMI2 GreenYellow HalfFull InputSeverity Integrity LoopbackType MetricImperial NoYes OffOn PmTableType ProgressStatus QueueName RadioId RateMbps RfuId Severity SignalLevel SlotId SwCommand SwCommandTimer TrailIfType TrailProtectedType |
| RFC-1215 | TRAP-TYPE |
| RFC1155-SMI | -- Counter Gauge |
| RFC1213-MIB | DisplayString ifIndex |
| SNMPv2-SMI | Counter32 enterprises Gauge32 IpAddress OBJECT-TYPE |
| SNMPv2-TC | MacAddress RowStatus |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.2281 | Nodemicrowave-radio | |||
| 1.3.6.1.4.1.2281.10 | NodegenEquip | |||
| 1.3.6.1.4.1.2281.10.1 | NodegenEquipUnit | |||
| 1.3.6.1.4.1.2281.10.2 | NodegenEquipNetwork | |||
| 1.3.6.1.4.1.2281.10.2.1 | ScalargenEquipNetworkRemoteIp | read-only | obsolete | This value indicates the Remote IP address. |
| 1.3.6.1.4.1.2281.10.2.2 | ScalargenEquipNetworkMateIp | read-only | mandatory | This value indicates the Mate IP address. (same as genEquipProtectionMateIPAddr) |
| 1.3.6.1.4.1.2281.10.2.3 | ScalargenEquipNetworkAgentIp | read-only | obsolete | This value indicates the Agent IP address. (same as genEquipNetworkManagmentLocalIp) |
| 1.3.6.1.4.1.2281.10.2.4 | NodegenEquipNetworkManagment | |||
| 1.3.6.1.4.1.2281.10.2.4.1 | ScalargenEquipNetworkManagmentLocalIp | read-write | mandatory | This value indicates the local IP address. (same as genEquipNetworkAgentIp) |
| 1.3.6.1.4.1.2281.10.2.4.2 | ScalargenEquipNetworkManagmentLocalSubnetMask | read-write | mandatory | This value indicates the local subnet mask. (for example 255.255.255.0) |
| 1.3.6.1.4.1.2281.10.2.4.3 | ScalargenEquipNetworkManagmentLocalDefaultGateway | read-write | mandatory | This value indicates the local default gateway. |
| 1.3.6.1.4.1.2281.10.2.4.4 | ScalargenEquipNetworkManagmentLocalHWAddr | read-only | mandatory | This value indicates the MAC Address used for management (related to the management IP address of the system). |
| 1.3.6.1.4.1.2281.10.2.4.5 | ScalargenEquipNetworkManagmentRemoteSubnetMask | read-write | obsolete | This value indicates the Remote subnet mask.(for example 255.255.255.0) |
| 1.3.6.1.4.1.2281.10.2.4.6 | ScalargenEquipNetworkManagmentNumOfPorts | read-write | mandatory | This value indicates the number of management ports. |
| 1.3.6.1.4.1.2281.10.2.4.7 | ScalargenEquipNetworkManagmentInBandVLAN | read-write | mandatory | This value indicates the number of in-band VLANs. |
| 1.3.6.1.4.1.2281.10.2.4.8 | ScalargenEquipNetworkManagmentPortType | read-write | mandatory | This is a configurable option to use in-band or out-of-band management. |
| 1.3.6.1.4.1.2281.10.2.4.9 | ScalargenEquipNetworkManagmentPortCapacity | read-write | mandatory | This value indicates a limit rate for the management port capacity in kbps. |
| 1.3.6.1.4.1.2281.10.2.4.10 | ScalargenEquipNetworkManagmentPortAutoNegotiation | read-write | mandatory | Enable or disable the Auto Negotiation option, on all management ports. |
| 1.3.6.1.4.1.2281.10.2.4.11 | ScalargenEquipNetworkManagmentPortRate | read-write | mandatory | This value indicates the port rate in Mbps (all management ports). Possible values are: - n10(0) 10Mbps - n100(1) 100Mbps - n1000(2) 1000Mbps |
| 1.3.6.1.4.1.2281.10.2.4.12 | ScalargenEquipNetworkManagmentPortDuplex | read-write | mandatory | This value indicates the port duplex value, for all management ports. |
| 1.3.6.1.4.1.2281.10.2.4.13 | ScalargenEquipNetworkManagmentBlockMngTowardsLine | read-write | mandatory | Blocking the in-band management frames to egress via the Ethernet line interface in pipe application. |
| 1.3.6.1.4.1.2281.10.2.4.20 | TablegenEquipNetworkManagmentIpAddrCfgTable | not-accessible | mandatory | This table keeps the information about the neighbour attributes, such as IP address, MAC address, slot, port number and description. It can be used by the NMS … |
| 1.3.6.1.4.1.2281.10.2.4.20.1 | RowgenEquipNetworkManagmentIpAddrCfgEntry | not-accessible | mandatory | This table keeps the information about the neighbour attributes, such as IP address, MAC address, slot, port number and description. It can be used by the NMS … |
| 1.3.6.1.4.1.2281.10.2.4.20.1.1 | ColumngenEquipNetworkManagmentIpAddrCfgMngId | read-write | mandatory | Management Ifindex. |
| 1.3.6.1.4.1.2281.10.2.4.20.1.2 | ColumngenEquipNetworkManagmentIpAddrCfgIpv4Address | read-write | mandatory | This value indicates the local IP address |
| 1.3.6.1.4.1.2281.10.2.4.20.1.3 | ColumngenEquipNetworkManagmentIpAddrCfgIpv4SubnetMask | read-write | mandatory | This value indicates the local subnet mask. (for example 255.255.255.0) |
| 1.3.6.1.4.1.2281.10.2.4.20.1.4 | ColumngenEquipNetworkManagmentIpAddrCfgDefaultGateway | read-write | mandatory | This value indicates the local default gateway. |
| 1.3.6.1.4.1.2281.10.2.4.20.1.5 | ColumngenEquipNetworkManagmentIpAddrCfgIpv6Address | read-write | mandatory | This value indicates the Local IPv6. y is a 16-bit hexadecimal field of the form xxxx, where x takes values from 0 to F. |
| 1.3.6.1.4.1.2281.10.2.4.20.1.6 | ColumngenEquipNetworkManagmentIpAddrCfgIpv6PrefixLength | read-write | mandatory | IPv6 Prefix-Length specifies the IPv6 subnet. |
| 1.3.6.1.4.1.2281.10.2.4.20.1.7 | ColumngenEquipNetworkManagmentIpAddrCfgDefaultGatewayIPv6 | read-write | mandatory | This value indicates the local IPv6 default gateway. |
| 1.3.6.1.4.1.2281.10.2.5 | NodegenEquipNetworkIP | |||
| 1.3.6.1.4.1.2281.10.2.5.1 | TablegenEquipNetworkIPTable | not-accessible | mandatory | This table keeps the information about the neighbour attributes, such as IP address, MAC address, slot, port number and description. It can be used by the NMS … |
| 1.3.6.1.4.1.2281.10.2.5.1.1 | RowgenEquipNetworkIPEntry | not-accessible | mandatory | This table keeps the information about the neighbour attributes, such as IP address, MAC address, slot, port number and description. It can be used by the NMS … |
| 1.3.6.1.4.1.2281.10.2.5.1.1.1 | ColumngenEquipNetworkIPEthernetPort | read-only | mandatory | Ethernet port (local port) is the index of the table, to be taken from ifIndex. |
| 1.3.6.1.4.1.2281.10.2.5.1.1.2 | ColumngenEquipNetworkIPPeerMacAddr | read-write | mandatory | The Peer (far-end) Mac address of the managed NE (CPU) connected on the local Ethernet port |
| 1.3.6.1.4.1.2281.10.2.5.1.1.3 | ColumngenEquipNetworkIPPeerIPAddr | read-write | mandatory | The Peer (far-end) IP address of the managed NE (CPU) connected on the local Ethernet port |
| 1.3.6.1.4.1.2281.10.2.5.1.1.4 | ColumngenEquipNetworkIPPeerSlotID | read-write | mandatory | The Peer (far-end) slot-id of the managed NE connected on the local Ethernet port. |
| 1.3.6.1.4.1.2281.10.2.5.1.1.5 | ColumngenEquipNetworkIPPeerPortNumber | read-write | mandatory | The Peer (far-end) port number of the managed NE connected on the local Ethernet port. The port number is sequential starting with 1 |
| 1.3.6.1.4.1.2281.10.2.5.1.1.6 | ColumngenEquipNetworkIPPeerDescr | read-write | mandatory | User defined description for the peer port |
| 1.3.6.1.4.1.2281.10.2.5.1.1.7 | ColumngenEquipNetworkIPPeerNodeToNodeConnection | read-write | mandatory | Node To Node Connection. This column is relevant only for STM-1/OC-3 connections. if this parameter is enabled, it means that the STM-1/OC-3 port is connected … |
| 1.3.6.1.4.1.2281.10.2.5.2 | ScalargenEquipNetworkIPClearAllPeerInfo | read-write | mandatory | This parameter is a command to clear the neighbor IP table info |
| 1.3.6.1.4.1.2281.10.2.6 | ScalargenEquipNetworkFloatingIp | read-write | mandatory | This value indicates the floating IP used when system is in protection mode. This address must differ from system's own IP address (genEquipNetworkAgentIp) as … |
| 1.3.6.1.4.1.2281.10.2.7 | ScalargenEquipNetworkAgentIpV6 | read-only | mandatory | This value indicates the agent IP V6. This parameter will be use for Trap only. |
| 1.3.6.1.4.1.2281.10.8 | NodegenEquipServices | |||
| 1.3.6.1.4.1.2281.10.8.1 | NodegenEquipEthernetSwitch | |||
| 1.3.6.1.4.1.2281.10.8.1.1 | NodegenEquipEthernetSwitchCfg | |||
| 1.3.6.1.4.1.2281.10.8.1.1.1 | ScalargenEquipEthernetSwitchCfgAppType | read-write | mandatory | The mode of the switch application. Note, managed-switch or metro-swtich require license. Single-pipe: No switching is done, the NE acts as a Pipe. Managed-swi… |
| 1.3.6.1.4.1.2281.10.8.1.1.2 | TablegenEquipEthernetSwitchCfgVIDTable | not-accessible | mandatory | The switch VLAN table. |
| 1.3.6.1.4.1.2281.10.8.1.1.2.1 | RowgenEquipEthernetSwitchCfgVIDEntry | not-accessible | mandatory | The switch VLAN table. |
| 1.3.6.1.4.1.2281.10.8.1.1.2.1.1 | ColumngenEquipEthernetSwitchCfgVIDIndex | read-write | mandatory | VLAN number, the index of the table. |
| 1.3.6.1.4.1.2281.10.8.1.1.2.1.2 | ColumngenEquipEthernetSwitchCfgVIDName | read-write | mandatory | VLAN name. |
| 1.3.6.1.4.1.2281.10.8.1.1.2.1.3 | ColumngenEquipEthernetSwitchCfgVIDState | read-write | mandatory | VLAN state. |
| 1.3.6.1.4.1.2281.10.8.1.1.2.1.4 | ColumngenEquipEthernetSwitchCfgVIDMemberPorts | read-write | mandatory | A string that indicates in which ports this VLAN is allowed. Port numbers are separated by spaces |
| 1.3.6.1.4.1.2281.10.8.1.1.2.1.5 | ColumngenEquipEthernetSwitchCfgVIDEVCID | read-write | mandatory | This parameter defines a name for the Ethernet service running over this VLAN. This information is used by the NMS as a service identifier |
| 1.3.6.1.4.1.2281.10.8.1.1.2.1.6 | ColumngenEquipEthernetSwitchCfgVIDEVCDescription | read-write | mandatory | This parameter allows adding a description for the Ethernet service running over this VLAN. This information is informational only for users purposes |
| 1.3.6.1.4.1.2281.10.8.1.1.2.1.30 | ColumngenEquipEthernetSwitchCfgVIDRowStatus | read-write | mandatory | The raw status of the vlan table. |
| 1.3.6.1.4.1.2281.10.8.1.1.3 | ScalargenEquipEthernetSwitchCfgPbbteEthertype | read-write | mandatory | The PBB-TE-Tag ethertype value |
| 1.3.6.1.4.1.2281.10.8.1.1.4 | ScalargenEquipEthernetSwitchCfgProviderEthertype | read-write | mandatory | Ethertype of the provider VLANS (S-tag). This parameter configures the Marvell switch and it applys for all the ethernet ports. Possible choises are { 0x8100 ,… |
| 1.3.6.1.4.1.2281.10.8.1.1.5 | ScalargenEquipEthernetSwitchCfgJumboModeAdmin | read-write | mandatory | This configuration defines the Ethernet Maximal Transmit Unit (MTU) size. When jumbo mode is enabled, MTU=9612 bytes. When disabled, MTU=1632 bytes. This confi… |
| 1.3.6.1.4.1.2281.10.8.1.2 | NodegenEquipEthernetSwitchXSTP | |||
| 1.3.6.1.4.1.2281.10.8.1.2.1 | ScalargenEquipEthernetSwitchXSTPProtocol | read-write | mandatory | Selection of the xSTP protocol. Note that not all protocols may be available in all software releases |
| 1.3.6.1.4.1.2281.10.8.1.2.2 | NodegenEquipEthernetSwitchXSTPParams | |||
| 1.3.6.1.4.1.2281.10.8.1.2.2.1 | ScalargenEquipEthernetSwitchXSTPBridgeID | read-only | mandatory | The RSTP bridge ID |
| 1.3.6.1.4.1.2281.10.8.1.2.2.2 | ScalargenEquipEthernetSwitchXSTPRootID | read-only | mandatory | The RSTP root id. |
| 1.3.6.1.4.1.2281.10.8.1.2.2.3 | ScalargenEquipEthernetSwitchXSTPRootPath | read-only | mandatory | The RSTP root path cost. |
| 1.3.6.1.4.1.2281.10.8.1.2.2.4 | ScalargenEquipEthernetSwitchXSTPBridgeRole | read-only | mandatory | The bridge role. |
| 1.3.6.1.4.1.2281.10.8.1.2.2.5 | ScalargenEquipEthernetSwitchXSTPCfgPriority | read-write | mandatory | RSTP Bridge priority. |
| 1.3.6.1.4.1.2281.10.8.1.2.2.6 | TablegenEquipEthernetSwitchXSTPParamsEthernetPortsTable | not-accessible | mandatory | RSTP port status table. |
| 1.3.6.1.4.1.2281.10.8.1.2.2.6.1 | RowgenEquipEthernetSwitchXSTPParamsEthernetPortsEntry | not-accessible | mandatory | RSTP port status table. |
| 1.3.6.1.4.1.2281.10.8.1.2.2.6.1.1 | ColumngenEquipEthernetSwitchXSTPParamsEthernetPortsState | read-only | mandatory | RSTP port state. |
| 1.3.6.1.4.1.2281.10.8.1.2.2.6.1.2 | ColumngenEquipEthernetSwitchXSTPParamsEthernetPortsRole | read-only | mandatory | RSTP port role. |
| 1.3.6.1.4.1.2281.10.8.1.2.2.6.1.3 | ColumngenEquipEthernetSwitchXSTPParamsEthernetPortsPathCost | read-write | mandatory | RSTP configured path cost. |
| 1.3.6.1.4.1.2281.10.8.1.2.2.6.1.4 | ColumngenEquipEthernetSwitchXSTPParamsEthernetPortsPriority | read-write | mandatory | RSTP configured port priority. |
| 1.3.6.1.4.1.2281.10.8.1.2.2.6.1.5 | ColumngenEquipEthernetSwitchXSTPParamsEthernetDesPathCost | read-only | mandatory | RSTP designated path cost. This is the path cost to the root port from this local port. |
| 1.3.6.1.4.1.2281.10.8.1.2.2.6.1.6 | ColumngenEquipEthernetSwitchXSTPParamsEthernetEdgePort | read-write | mandatory | This parameter indicates if the port is an Edge port or not. |
| 1.3.6.1.4.1.2281.10.8.1.3 | NodegenEquipEthernetSwitchQoS | |||
| 1.3.6.1.4.1.2281.10.8.1.3.1 | TablegenEquipEthernetSwitchQoSTable | not-accessible | mandatory | The switch application, QoS Table. |
| 1.3.6.1.4.1.2281.10.8.1.3.1.1 | RowgenEquipEthernetSwitchQoSEntry | not-accessible | mandatory | The switch application, QoS Table, per Ethernet port based on ifIndex. |
| 1.3.6.1.4.1.2281.10.8.1.3.1.1.1 | ColumngenEquipEthernetSwitchQoSFirstCrit | read-write | mandatory | First classification criteria. This is the first criteria which will be evaluated for incoming frames. queueDecision causes classification by defined static MA… |
| 1.3.6.1.4.1.2281.10.8.1.3.1.1.2 | ColumngenEquipEthernetSwitchQoSSecondCrit | read-write | mandatory | Second classification criteria. Applicable if match with first criteria is not found. queueDecision causes classification by defined VLAN to queue mapping. pbi… |
| 1.3.6.1.4.1.2281.10.8.1.3.1.1.3 | ColumngenEquipEthernetSwitchQoSThirdCrit | read-write | mandatory | Third classification criteria. Applicable if match with first or second criteria is not found. ipTosPriority causes classification by defined IP TOS to queue m… |
| 1.3.6.1.4.1.2281.10.8.1.3.1.1.4 | ColumngenEquipEthernetSwitchQoSDefClassification | read-write | mandatory | Default classification for frame that does suit to the previous classifications. Choosing first will classify this frame as the first criteria for example. |
| 1.3.6.1.4.1.2281.10.8.1.3.1.1.5 | ColumngenEquipEthernetSwitchQoSEgressSched | read-write | mandatory | Egress scheduler options. |
| 1.3.6.1.4.1.2281.10.8.1.3.1.1.6 | ColumngenEquipEthernetSwitchQoSEgressShaper | read-write | mandatory | Enable/Disable egress shaping. |
| 1.3.6.1.4.1.2281.10.8.1.3.1.1.7 | ColumngenEquipEthernetSwitchQoSEgressShaperRate | read-write | mandatory | Egress shaper rate. |
| 1.3.6.1.4.1.2281.10.8.1.3.1.1.8 | ColumngenEquipEthernetSwitchQoSIngressPolicer | read-write | mandatory | Ingress policer (rate limiting) name assiciated with this port. The policer Name is defined in genEquipEthernetSwitchQoSPolicerNameName (in a table) |
| 1.3.6.1.4.1.2281.10.8.1.3.2 | TablegenEquipEthernetSwitchVlanPbitRemapTable | not-accessible | mandatory | VLAN priority bits remapping table. |
| 1.3.6.1.4.1.2281.10.8.1.3.2.1 | RowgenEquipEthernetSwitchVlanPbitRemapEntry | not-accessible | mandatory | VLAN priority bits remap table. |
| 1.3.6.1.4.1.2281.10.8.1.3.2.1.1 | ColumngenEquipEthernetSwitchVlanPbitRemapPbit | read-only | mandatory | The ingress Pbit. |
| 1.3.6.1.4.1.2281.10.8.1.3.2.1.2 | ColumngenEquipEthernetSwitchVlanPbitRemapRemappedPbit | read-write | mandatory | The remapped Pbit. |
| 1.3.6.1.4.1.2281.10.8.1.3.3 | TablegenEquipEthernetSwitchQoSVLANIdToQueueTable | not-accessible | mandatory | VLAN Id to Queue mapping table. |
| 1.3.6.1.4.1.2281.10.8.1.3.3.1 | RowgenEquipEthernetSwitchQoSVLANIdToQueueEntry | not-accessible | mandatory | VLAN Id to Queue mapping table. |
| 1.3.6.1.4.1.2281.10.8.1.3.3.1.1 | ColumngenEquipEthernetSwitchQoSVLANIdToQueueQueue | read-write | mandatory | Queue for the vlan. |
| 1.3.6.1.4.1.2281.10.8.1.3.4 | NodegenEquipEthernetSwitchQoSIPPbits | |||
| 1.3.6.1.4.1.2281.10.8.1.3.4.1 | ScalargenEquipEthernetSwitchQoSIPPbitsIPPrio | read-write | mandatory | IP priority options. |
| 1.3.6.1.4.1.2281.10.8.1.3.4.2 | TablegenEquipEthernetSwitchQoSIPPbitsTable | not-accessible | mandatory | Mapping of IP pbits to Queue. |
| 1.3.6.1.4.1.2281.10.8.1.3.4.2.1 | RowgenEquipEthernetSwitchQoSIPPbitsEntry | not-accessible | mandatory | Mapping of IP pbits to Queue. |
| 1.3.6.1.4.1.2281.10.8.1.3.4.2.1.1 | ColumngenEquipEthernetSwitchQoSIPPbitsId | read-only | mandatory | The pbit number. |
| 1.3.6.1.4.1.2281.10.8.1.3.4.2.1.2 | ColumngenEquipEthernetSwitchQoSIPPbitsQueue | read-write | mandatory | the queue for that pbit. |
| 1.3.6.1.4.1.2281.10.8.1.3.5 | TablegenEquipEthernetSwitchQoSVLANPbitsTable | not-accessible | mandatory | VLAN pbit to queue mapping table. |
| 1.3.6.1.4.1.2281.10.8.1.3.5.1 | RowgenEquipEthernetSwitchQoSVLANPbitsEntry | not-accessible | mandatory | VLAN pbit to queue mapping table. |
| 1.3.6.1.4.1.2281.10.8.1.3.5.1.1 | ColumngenEquipEthernetSwitchQoSVLANPbitsId | read-only | mandatory | The VLAN'S pbit (index of the table) |
| 1.3.6.1.4.1.2281.10.8.1.3.5.1.2 | ColumngenEquipEthernetSwitchQoSVLANPbitsQueue | read-write | mandatory | The mapped queue for the corresponding VLAN . |
| 1.3.6.1.4.1.2281.10.8.1.3.6 | TablegenEquipEthernetSwitchQoSQueueWeightsTable | not-accessible | mandatory | Queue weights mapping table. |
| 1.3.6.1.4.1.2281.10.8.1.3.6.1 | RowgenEquipEthernetSwitchQoSQueueWeightsEntry | not-accessible | mandatory | Queue weights mapping table. |
| 1.3.6.1.4.1.2281.10.8.1.3.6.1.1 | ColumngenEquipEthernetSwitchQoSQueueWeightsId | read-only | mandatory | Index for this table. |
| 1.3.6.1.4.1.2281.10.8.1.3.6.1.2 | ColumngenEquipEthernetSwitchQoSQueueWeightsQueue | read-only | mandatory | The queue number. |
| 1.3.6.1.4.1.2281.10.8.1.3.6.1.3 | ColumngenEquipEthernetSwitchQoSQueueWeightsWeight | read-write | mandatory | The weight for the queue |
| 1.3.6.1.4.1.2281.10.8.1.3.7 | TablegenEquipEthernetSwitchQoSPolicerNameTable | not-accessible | mandatory | Table of configured policers. |
| 1.3.6.1.4.1.2281.10.8.1.3.7.1 | RowgenEquipEthernetSwitchQoSPolicerNameEntry | not-accessible | mandatory | Table of configured policers. |
| 1.3.6.1.4.1.2281.10.8.1.3.7.1.1 | ColumngenEquipEthernetSwitchQoSPolicerNameId | read-only | mandatory | Policer ID |
| 1.3.6.1.4.1.2281.10.8.1.3.7.1.2 | ColumngenEquipEthernetSwitchQoSPolicerNameName | read-write | mandatory | Policer name. |
| 1.3.6.1.4.1.2281.10.8.1.3.7.1.30 | ColumngenEquipEthernetSwitchQoSPolicerNameRowStatus | read-write | mandatory | Policer row status. |
| 1.3.6.1.4.1.2281.10.8.1.3.8 | TablegenEquipEthernetSwitchQoSPolicerListTable | not-accessible | mandatory | The policer class table list. |
| 1.3.6.1.4.1.2281.10.8.1.3.8.1 | RowgenEquipEthernetSwitchQoSPolicerListEntry | not-accessible | mandatory | The policer class table list. |
| 1.3.6.1.4.1.2281.10.8.1.3.8.1.1 | ColumngenEquipEthernetSwitchQoSPolicerListId | read-only | mandatory | The policer ID. |
| 1.3.6.1.4.1.2281.10.8.1.3.8.1.2 | ColumngenEquipEthernetSwitchQoSPolicerListName | read-write | mandatory | The policer class name |
| 1.3.6.1.4.1.2281.10.8.1.3.8.1.3 | ColumngenEquipEthernetSwitchQoSPolicerListClassName | read-write | mandatory | The policer class name |
| 1.3.6.1.4.1.2281.10.8.1.3.8.1.4 | ColumngenEquipEthernetSwitchQoSPolicerListTrafficType | read-write | mandatory | The traffic type that the policer applies to. |
| 1.3.6.1.4.1.2281.10.8.1.3.8.1.5 | ColumngenEquipEthernetSwitchQoSPolicerListCIR | read-write | mandatory | The CIR (Critical Information Rate) value (in Kbps) |
| 1.3.6.1.4.1.2281.10.8.1.3.8.1.6 | ColumngenEquipEthernetSwitchQoSPolicerListCBS | read-write | mandatory | The CBS (Critical Burst Size) value (in Bytes) |
| 1.3.6.1.4.1.2281.10.8.1.3.8.1.30 | ColumngenEquipEthernetSwitchQoSPolicerListRowStatus | read-write | mandatory | Row status of the table. |
| 1.3.6.1.4.1.2281.10.8.1.3.9 | TablegenEquipEthernetSwitchQoSStaticMacTable | not-accessible | mandatory | Static MAC forwarding table. |
| 1.3.6.1.4.1.2281.10.8.1.3.9.1 | RowgenEquipEthernetSwitchQoSStaticMacEntry | not-accessible | mandatory | Static MAC forwarding table. |
| 1.3.6.1.4.1.2281.10.8.1.3.9.1.1 | ColumngenEquipEthernetSwitchQoSStaticMacId | read-only | mandatory | The index of the table |
| 1.3.6.1.4.1.2281.10.8.1.3.9.1.2 | ColumngenEquipEthernetSwitchQoSStaticMacAddr | read-write | mandatory | Static MAC Address. |
| 1.3.6.1.4.1.2281.10.8.1.3.9.1.3 | ColumngenEquipEthernetSwitchQoSStaticMacVlanId | read-write | mandatory | VLAN ID for this MAC. |
| 1.3.6.1.4.1.2281.10.8.1.3.9.1.4 | ColumngenEquipEthernetSwitchQoSStaticMacForwardTo | read-write | mandatory | The port number to be forwarded to, starting from 1. |
| 1.3.6.1.4.1.2281.10.8.1.3.9.1.5 | ColumngenEquipEthernetSwitchQoSStaticMacPriority | read-write | mandatory | The priority to be given to this MAC address. |
| 1.3.6.1.4.1.2281.10.8.1.3.9.1.30 | ColumngenEquipEthernetSwitchQoSStaticMacRowStatus | read-write | mandatory | The row status of the operation. |
| 1.3.6.1.4.1.2281.10.8.1.4 | NodegenEquipEthernetSwitchLag | |||
| 1.3.6.1.4.1.2281.10.8.1.4.1 | ScalargenEquipEthernetSwitchLagDistFunction | read-write | mandatory | LAG distribution function. |
| 1.3.6.1.4.1.2281.10.8.1.4.2 | ScalargenEquipEthernetSwitchLagMaxNumber | read-only | mandatory | Max number of LAG port groups. |
| 1.3.6.1.4.1.2281.10.8.1.5 | NodegenEquipEthernetSwitchETM | |||
| 1.3.6.1.4.1.2281.10.8.1.5.1 | ScalargenEquipEthernetSwitchEtmAdmin | read-write | mandatory | Enabling/Disabling the entire enhanced TM functionality. |
| 1.3.6.1.4.1.2281.10.8.1.5.2 | ScalargenEquipEthernetSwitchEtmPTPOptimizedTransportModeAdmin | read-write | mandatory | Precision Time Protocol low PDV channel admin Upon enabling all the packets classified to the 8th queue will bypass the scheduler and will be sent directly to … |
| 1.3.6.1.4.1.2281.10.8.1.5.3 | ScalargenEquipEthernetSwitchEtmCountersClear | read-write | mandatory | Reset selected module's counters. |
| 1.3.6.1.4.1.2281.10.8.1.5.4 | ScalargenEquipEthernetSwitchEtmPTPOptimizedTransportMode | read-write | mandatory | PTP optimized transport channel operation mode. In High-CoS-Queue-8 mode all the frames that will be classified to the 8th queue in the traffic manager will be… |
| 1.3.6.1.4.1.2281.10.8.1.5.6 | NodegenEquipEthernetSwitchEtmClassifier | |||
| 1.3.6.1.4.1.2281.10.8.1.5.6.1 | NodegenEquipEthernetSwitchEtmClassifierByMac | |||
| 1.3.6.1.4.1.2281.10.8.1.5.6.1.1 | ScalargenEquipEthernetSwitchEtmClassifierByMacAdmin | read-write | mandatory | Enabling/Disabling CoS and color classification by destination MAC addresses. |
| 1.3.6.1.4.1.2281.10.8.1.5.6.1.2 | TablegenEquipEthernetSwitchEtmClassifierByMacTable | not-accessible | mandatory | Table for CoS and color classification by destination MAC address. |
| 1.3.6.1.4.1.2281.10.8.1.5.6.1.2.1 | RowgenEquipEthernetSwitchEtmClassifierByMacEntry | not-accessible | mandatory | Table for CoS and color classification by destination MAC address. |
| 1.3.6.1.4.1.2281.10.8.1.5.6.1.2.1.1 | ColumngenEquipEthernetSwitchEtmClassifierByMacIndex | read-only | mandatory | The index is pointing to a table entry. Each entry contains different MAC address. |
| 1.3.6.1.4.1.2281.10.8.1.5.6.1.2.1.2 | ColumngenEquipEthernetSwitchEtmClassifierByMacValue | read-write | mandatory | MAC Address value for CoS Classification by MAC Table Entry. |
| 1.3.6.1.4.1.2281.10.8.1.5.6.1.2.1.3 | ColumngenEquipEthernetSwitchEtmClassifierByMacCos | read-write | mandatory | CoS value for CoS Classification by MAC Table Entry. |
| 1.3.6.1.4.1.2281.10.8.1.5.6.1.2.1.4 | ColumngenEquipEthernetSwitchEtmClassifierByMacColor | read-write | mandatory | Color value for CoS Classification by MAC Table Entry. |
| 1.3.6.1.4.1.2281.10.8.1.5.6.1.2.1.30 | ColumngenEquipEthernetSwitchEtmClassifierByMacRowStatus | read-write | mandatory | Row Status for this table. |
| 1.3.6.1.4.1.2281.10.8.1.5.6.2 | NodegenEquipEthernetSwitchEtmClassifierByUdpPort | |||
| 1.3.6.1.4.1.2281.10.8.1.5.6.2.1 | ScalargenEquipEthernetSwitchEtmClassifierByUdpPortAdmin | read-write | mandatory | Enabling/Disabling CoS and color classification by UDP source and/or destination ports. |
| 1.3.6.1.4.1.2281.10.8.1.5.6.2.2 | TablegenEquipEthernetSwitchEtmClassifierByUdpPortTable | not-accessible | mandatory | Table for CoS and color classification by UDP ports. Classification may be based on source port, dest port ,or both - use validity parameter. |
| 1.3.6.1.4.1.2281.10.8.1.5.6.2.2.1 | RowgenEquipEthernetSwitchEtmClassifierByUdpPortEntry | not-accessible | mandatory | Entry for CoS and color classification by UDP ports. Classification may be based on source port, dest port ,or both - use validity parameter. |
| 1.3.6.1.4.1.2281.10.8.1.5.6.2.2.1.1 | ColumngenEquipEthernetSwitchEtmClassifierByUdpPortIndex | read-only | mandatory | The index is pointing to a table entry. Each entry contains different UDP source and destination ports. |
| 1.3.6.1.4.1.2281.10.8.1.5.6.2.2.1.2 | ColumngenEquipEthernetSwitchEtmClassifierByUdpPortSrcPort | read-write | mandatory | UDP source port value for CoS Classification by UDP ports Table Entry. |
| 1.3.6.1.4.1.2281.10.8.1.5.6.2.2.1.3 | ColumngenEquipEthernetSwitchEtmClassifierByUdpPortDestPort | read-write | mandatory | UDP dest. port value for CoS Classification by UDP ports Table Entry. |
| 1.3.6.1.4.1.2281.10.8.1.5.6.2.2.1.4 | ColumngenEquipEthernetSwitchEtmClassifierByUdpPortCos | read-write | mandatory | CoS value for CoS Classification by UDP Ports Table Entry. |
| 1.3.6.1.4.1.2281.10.8.1.5.6.2.2.1.5 | ColumngenEquipEthernetSwitchEtmClassifierByUdpPortColor | read-write | mandatory | Color value for CoS Classification by UDP ports Table Entry. |
| 1.3.6.1.4.1.2281.10.8.1.5.6.2.2.1.6 | ColumngenEquipEthernetSwitchEtmClassifierByUdpPortValidity | read-write | mandatory | Validity value for CoS Classification by UDP ports Table Entry. |
| 1.3.6.1.4.1.2281.10.8.1.5.6.2.2.1.30 | ColumngenEquipEthernetSwitchEtmClassifierByUdpPortRowStatus | read-write | mandatory | Row Status for this table. |
| 1.3.6.1.4.1.2281.10.8.1.5.6.4 | NodegenEquipEthernetSwitchEtmClassifierByKnownPduMac | |||
| 1.3.6.1.4.1.2281.10.8.1.5.6.4.1 | ScalargenEquipEthernetSwitchEtmClassifierByKnownPduMacAdmin | read-write | mandatory | Enabling/Disabling CoS and color classification by known PDU MAC addresses. |
| 1.3.6.1.4.1.2281.10.8.1.5.6.4.2 | TablegenEquipEthernetSwitchEtmClassifierByKnownPduMacTable | not-accessible | mandatory | Table for CoS and color classification by known PDU MAC addresses. |
| 1.3.6.1.4.1.2281.10.8.1.5.6.4.2.1 | RowgenEquipEthernetSwitchEtmClassifierByKnownPduMacEntry | not-accessible | mandatory | Table entry for CoS and color classification by known PDU MAC addresses. |
| 1.3.6.1.4.1.2281.10.8.1.5.6.4.2.1.1 | ColumngenEquipEthernetSwitchEtmClassifierByKnownPduMacIndex | read-only | mandatory | The index is pointing to a table entry. Each entry contains different PDU MAC address value. |
| 1.3.6.1.4.1.2281.10.8.1.5.6.4.2.1.2 | ColumngenEquipEthernetSwitchEtmClassifierByKnownPduMacAddress | read-only | mandatory | CoS value for MAC address Classification by known PDU Table Entry. |
| 1.3.6.1.4.1.2281.10.8.1.5.6.4.2.1.3 | ColumngenEquipEthernetSwitchEtmClassifierByKnownPduMacCos | read-write | mandatory | CoS value for CoS Classification by known PDU Table Entry. |
| 1.3.6.1.4.1.2281.10.8.1.5.6.4.2.1.4 | ColumngenEquipEthernetSwitchEtmClassifierByKnownPduMacColor | read-write | mandatory | Color value for CoS Classification by known PDU Table Entry. |
| 1.3.6.1.4.1.2281.10.8.1.5.6.4.2.1.5 | ColumngenEquipEthernetSwitchEtmClassifierByKnownPduMacValidity | read-write | mandatory | Validity value for Cos Classification by known PDU Table Entry. |
| 1.3.6.1.4.1.2281.10.8.1.5.6.5 | NodegenEquipEthernetSwitchEtmClassifierByService | |||
| 1.3.6.1.4.1.2281.10.8.1.5.6.5.1 | ScalargenEquipEthernetSwitchEtmClassifierByServiceAdmin | read-write | mandatory | Enabling/Disabling CoS and color classification by service IDs. |
| 1.3.6.1.4.1.2281.10.8.1.5.6.5.2 | TablegenEquipEthernetSwitchEtmClassifierByServiceTable | not-accessible | mandatory | Table for CoS and color classification by service-ids. |
| 1.3.6.1.4.1.2281.10.8.1.5.6.5.2.1 | RowgenEquipEthernetSwitchEtmClassifierByServiceEntry | not-accessible | mandatory | Table entry for CoS and color classification by service-ids. |
| 1.3.6.1.4.1.2281.10.8.1.5.6.5.2.1.1 | ColumngenEquipEthernetSwitchEtmClassifierByServiceIndex | read-only | mandatory | The index is pointing to a table entry. Each entry contains a mapping of service-id to CoS. |
| 1.3.6.1.4.1.2281.10.8.1.5.6.5.2.1.2 | ColumngenEquipEthernetSwitchEtmClassifierByServiceCos | read-write | mandatory | CoS value for CoS serviceID Mapping Table Entry. |
| 1.3.6.1.4.1.2281.10.8.1.5.6.5.2.1.3 | ColumngenEquipEthernetSwitchEtmClassifierByServiceColor | read-write | mandatory | Color value for CoS serviceId Mapping Table Entry. |
| 1.3.6.1.4.1.2281.10.8.1.5.6.5.2.1.4 | ColumngenEquipEthernetSwitchEtmClassifierByServiceUsage | read-write | mandatory | Validity value for CoS serviceID Mapping Table Entry. |
| 1.3.6.1.4.1.2281.10.8.1.5.6.6 | NodegenEquipEthernetSwitchEtmClassifierByVlanPbits | |||
| 1.3.6.1.4.1.2281.10.8.1.5.6.6.1 | ScalargenEquipEthernetSwitchEtmClassifierByVlanPbitsAdmin | read-write | mandatory | Enabling/Disabling CoS and color classification by VLAN P-bits and CFI/DEI bit. |
| 1.3.6.1.4.1.2281.10.8.1.5.6.6.2 | TablegenEquipEthernetSwitchEtmClassifierByVlanPbitsVlanTable | not-accessible | mandatory | Table for CoS and color classification by VLAN S-tag P-bits and DEI bit. |
| 1.3.6.1.4.1.2281.10.8.1.5.6.6.2.1 | RowgenEquipEthernetSwitchEtmClassifierByVlanPbitsVlanEntry | not-accessible | mandatory | Table entry for CoS and color classification by VLAN S-tag P-bits and DEI bit. |
| 1.3.6.1.4.1.2281.10.8.1.5.6.6.2.1.1 | ColumngenEquipEthernetSwitchEtmClassifierByVlanPbitsVlanIndex | read-only | mandatory | Pbit vlan index to table. |
| 1.3.6.1.4.1.2281.10.8.1.5.6.6.2.1.2 | ColumngenEquipEthernetSwitchEtmClassifierByVlanPbitsVlanPriority | read-only | mandatory | Pbit value for regular classification prioritization. |
| 1.3.6.1.4.1.2281.10.8.1.5.6.6.2.1.3 | ColumngenEquipEthernetSwitchEtmClassifierByVlanPbitsVlanDei | read-only | mandatory | DEI value for regular classification prioritization by S-tag vlan. |
| 1.3.6.1.4.1.2281.10.8.1.5.6.6.2.1.4 | ColumngenEquipEthernetSwitchEtmClassifierByVlanPbitsVlanCos | read-write | mandatory | CoS value for regular classification prioritization by S-tag VLAN. |
| 1.3.6.1.4.1.2281.10.8.1.5.6.6.2.1.5 | ColumngenEquipEthernetSwitchEtmClassifierByVlanPbitsVlanColor | read-write | mandatory | Color value for regular classification prioritization by S-tag VLAN. |
| 1.3.6.1.4.1.2281.10.8.1.5.6.7 | NodegenEquipEthernetSwitchEtmClassifierByDscp | |||
| 1.3.6.1.4.1.2281.10.8.1.5.6.7.1 | ScalargenEquipEthernetSwitchEtmClassifierByDscpAdmin | read-write | mandatory | Enabling/Disabling Cos and color classification by DSCP/TOS bits. |
| 1.3.6.1.4.1.2281.10.8.1.5.6.7.2 | TablegenEquipEthernetSwitchEtmClassifierByDscpTable | not-accessible | mandatory | Table for CoS and color classification by DSCP/TOS bits. |
| 1.3.6.1.4.1.2281.10.8.1.5.6.7.2.1 | RowgenEquipEthernetSwitchEtmClassifierByDscpEntry | not-accessible | mandatory | Table entry for CoS and color classification by DSCP/TOS bits. |
| 1.3.6.1.4.1.2281.10.8.1.5.6.7.2.1.1 | ColumngenEquipEthernetSwitchEtmClassifierByDscpValue | read-only | mandatory | The index is pointing to a table entry. Each entry contains different DSCP/TOS bits mapping. |
| 1.3.6.1.4.1.2281.10.8.1.5.6.7.2.1.2 | ColumngenEquipEthernetSwitchEtmClassifierByDscpCos | read-write | mandatory | CoS value for regular classification prioritization by DSCP-tag. |
| 1.3.6.1.4.1.2281.10.8.1.5.6.7.2.1.3 | ColumngenEquipEthernetSwitchEtmClassifierByDscpColor | read-write | mandatory | Color value for regular classification prioritization by MPLS. |
| 1.3.6.1.4.1.2281.10.8.1.5.6.8 | NodegenEquipEthernetSwitchEtmClassifierByMplsExp | |||
| 1.3.6.1.4.1.2281.10.8.1.5.6.8.1 | ScalargenEquipEthernetSwitchEtmClassifierByMplsExpAdmin | read-write | mandatory | Enabling/Disabling CoS and color classification by MPLS experimantal bits. |
| 1.3.6.1.4.1.2281.10.8.1.5.6.8.2 | TablegenEquipEthernetSwitchEtmClassifierByMplsExpTable | not-accessible | mandatory | Table for CoS and color classification by MPLS experimental bits. |
| 1.3.6.1.4.1.2281.10.8.1.5.6.8.2.1 | RowgenEquipEthernetSwitchEtmClassifierByMplsExpEntry | not-accessible | mandatory | Table entry for CoS and color classification by MPLS experimental bits. |
| 1.3.6.1.4.1.2281.10.8.1.5.6.8.2.1.1 | ColumngenEquipEthernetSwitchEtmClassifierByMplsExpValue | read-only | mandatory | The index is pointing to a table entry. Each entry contains different MPLS experimantal bits mapping. |
| 1.3.6.1.4.1.2281.10.8.1.5.6.8.2.1.2 | ColumngenEquipEthernetSwitchEtmClassifierByMplsExpCos | read-write | mandatory | value for regular classification prioritization by MPLS. |
| 1.3.6.1.4.1.2281.10.8.1.5.6.8.2.1.3 | ColumngenEquipEthernetSwitchEtmClassifierByMplsExpColor | read-write | mandatory | Color value for regular classification prioritization by MPLS. |
| 1.3.6.1.4.1.2281.10.8.1.5.6.9 | NodegenEquipEthernetSwitchEtmClassifierByDefaultCosColor | |||
| 1.3.6.1.4.1.2281.10.8.1.5.6.9.1 | ScalargenEquipEthernetSwitchEtmClassifierByDefaultCos | read-write | mandatory | CoS value for regular classification prioritization by default port. |
| 1.3.6.1.4.1.2281.10.8.1.5.6.9.2 | ScalargenEquipEthernetSwitchEtmClassifierByDefaultColor | read-write | mandatory | Table for regular priority by default port mapping table. |
| 1.3.6.1.4.1.2281.10.8.1.5.6.10 | NodegenEquipEthernetSwitchEtmClassifierByCosToQueue | |||
| 1.3.6.1.4.1.2281.10.8.1.5.6.10.1 | TablegenEquipEthernetSwitchEtmClassifierByCosToQueueTable | not-accessible | mandatory | Table for VLAN to FlowId mapping . |
| 1.3.6.1.4.1.2281.10.8.1.5.6.10.1.1 | RowgenEquipEthernetSwitchEtmClassifierByCosToQueueEntry | not-accessible | mandatory | Table for VLAN to FlowId mapping . |
| 1.3.6.1.4.1.2281.10.8.1.5.6.10.1.1.1 | ColumngenEquipEthernetSwitchEtmClassifierByCosToQueueIndex | read-only | mandatory | The index is pointing to a table entry. Each entry contains a mapping of a different CoS to a queue. |
| 1.3.6.1.4.1.2281.10.8.1.5.6.10.1.1.2 | ColumngenEquipEthernetSwitchEtmClassifierByCosToQueueValue | read-write | mandatory | Queue index for CoS to Queue Mapping Table Entry. |
| 1.3.6.1.4.1.2281.10.8.1.5.6.11 | NodegenEquipEthernetSwitchEtmClassifierVlanidToService | |||
| 1.3.6.1.4.1.2281.10.8.1.5.6.11.1 | TablegenEquipEthernetSwitchEtmClassifierVlanidToServiceTable | not-accessible | mandatory | Table for VLAN to Vlan To Servies mapping . |
| 1.3.6.1.4.1.2281.10.8.1.5.6.11.1.1 | RowgenEquipEthernetSwitchEtmClassifierVlanidToServiceEntry | not-accessible | mandatory | Table for VLAN to Vlan To Servies mapping . |
| 1.3.6.1.4.1.2281.10.8.1.5.6.11.1.1.1 | ColumngenEquipEthernetSwitchEtmClassifierByServiceVlanidToServiceIndex | read-only | mandatory | The index is pointing to a table entry. Each entry contains a mapping of a different CoS to a queue. |
| 1.3.6.1.4.1.2281.10.8.1.5.6.11.1.1.2 | ColumngenEquipEthernetSwitchEtmClassifierByFlowsVlanidToServiceValue | read-write | mandatory | Service ID. |
| 1.3.6.1.4.1.2281.10.8.1.5.6.12 | NodegenEquipEthernetSwitchEtmClassifierInbandMgmtQoS | |||
| 1.3.6.1.4.1.2281.10.8.1.5.6.12.1 | ScalargenEquipEthernetSwitchEtmClassifierInbandMgmtAdmin | read-write | mandatory | Enabling/Disabling CoS and Color classification by VLAN ID. |
| 1.3.6.1.4.1.2281.10.8.1.5.6.12.2 | ScalargenEquipEthernetSwitchEtmClassifierInbandMgmtVlanId | read-write | mandatory | Inband Management vlan id. This parameter should be the same as genEquipEthernetSwitchEtmClassifierInbandMgmtVlanId. |
| 1.3.6.1.4.1.2281.10.8.1.5.6.12.3 | ScalargenEquipEthernetSwitchEtmClassifierInbandMgmtCos | read-write | mandatory | Class of Service. Allowed values: [0-7]. |
| 1.3.6.1.4.1.2281.10.8.1.5.6.12.4 | ScalargenEquipEthernetSwitchEtmClassifierInbandMgmtColor | read-write | mandatory | Color 1=green ; 0=yellow. |
| 1.3.6.1.4.1.2281.10.8.1.5.8 | NodegenEquipEthernetSwitchEtmPolicers | |||
| 1.3.6.1.4.1.2281.10.8.1.5.8.1 | ScalargenEquipEthernetSwitchEtmPolicerModuleAdmin | read-write | mandatory | Enabling/Disabling Policing. |
| 1.3.6.1.4.1.2281.10.8.1.5.8.2 | TablegenEquipEthernetSwitchEtmServiceToPolicerTable | not-accessible | mandatory | Table of Service to Policeer mapping. |
| 1.3.6.1.4.1.2281.10.8.1.5.8.2.1 | RowgenEquipEthernetSwitchEtmServiceToPolicerEntry | not-accessible | mandatory | Table of Service to Policeer mapping. |
| 1.3.6.1.4.1.2281.10.8.1.5.8.2.1.1 | ColumngenEquipEthernetSwitchEtmServiceToPolicerIndex | read-only | mandatory | Service Index. |
| 1.3.6.1.4.1.2281.10.8.1.5.8.2.1.2 | ColumngenEquipEthernetSwitchEtmServiceToPolicerValue | read-write | mandatory | Policer to be used for the specific Service. |
| 1.3.6.1.4.1.2281.10.8.1.5.8.2.1.3 | ColumngenEquipEthernetSwitchEtmServiceToPolicerPerCosOption | read-write | mandatory | Policer per CoS option. If enabled, each Service will be mapped to 8 policers while each policer will be used for a different CoS value. This option can be use… |
| 1.3.6.1.4.1.2281.10.8.1.5.8.3 | TablegenEquipEthernetSwitchEtmPolicerConfigTable | not-accessible | mandatory | Table of Policers configuration. |
| 1.3.6.1.4.1.2281.10.8.1.5.8.3.1 | RowgenEquipEthernetSwitchEtmPolicerConfigEntry | not-accessible | mandatory | Table of Policers configuration. |
| 1.3.6.1.4.1.2281.10.8.1.5.8.3.1.1 | ColumngenEquipEthernetSwitchEtmPolicerConfigIndex | read-only | mandatory | Service Index. |
| 1.3.6.1.4.1.2281.10.8.1.5.8.3.1.2 | ColumngenEquipEthernetSwitchEtmPolicerConfigAdmin | read-write | mandatory | Egress policer admin disables/enables the policing feature per policer. If not enabled, the policer is in bypass mode (no rate limiting). |
| 1.3.6.1.4.1.2281.10.8.1.5.8.3.1.3 | ColumngenEquipEthernetSwitchEtmPolicerConfigColorAware | read-write | mandatory | Whether policer is color aware. |
| 1.3.6.1.4.1.2281.10.8.1.5.8.3.1.4 | ColumngenEquipEthernetSwitchEtmPolicerConfigCir | read-write | mandatory | Egress policer CIR value - the committed rate user requests. |
| 1.3.6.1.4.1.2281.10.8.1.5.8.3.1.5 | ColumngenEquipEthernetSwitchEtmPolicerConfigCbs | read-write | mandatory | Egress policer committed burst size value. |
| 1.3.6.1.4.1.2281.10.8.1.5.8.3.1.6 | ColumngenEquipEthernetSwitchEtmPolicerConfigEir | read-write | mandatory | Egress policer EIR value - the excess rate user requests. |
| 1.3.6.1.4.1.2281.10.8.1.5.8.3.1.7 | ColumngenEquipEthernetSwitchEtmPolicerConfigEbs | read-write | mandatory | Egress policer excess burst size value (bytes). |
| 1.3.6.1.4.1.2281.10.8.1.5.8.3.1.8 | ColumngenEquipEthernetSwitchEtmPolicerConfigCoupling | read-write | mandatory | Egress policer coupling mode. |
| 1.3.6.1.4.1.2281.10.8.1.5.8.3.1.9 | ColumngenEquipEthernetSwitchEtmPolicerConfigLineComp | read-write | mandatory | Egress policer line compensation value (bytes). |
| 1.3.6.1.4.1.2281.10.8.1.5.9 | NodegenEquipEthernetSwitchEtmQueues | |||
| 1.3.6.1.4.1.2281.10.8.1.5.9.1 | TablegenEquipEthernetSwitchEtmQueuesTable | not-accessible | mandatory | Table of queue sizes. |
| 1.3.6.1.4.1.2281.10.8.1.5.9.1.1 | RowgenEquipEthernetSwitchEtmQueuesEntry | not-accessible | mandatory | Table entry of queue sizes. |
| 1.3.6.1.4.1.2281.10.8.1.5.9.1.1.1 | ColumngenEquipEthernetSwitchEtmQueuesIndex | read-only | mandatory | The Index to a queue. |
| 1.3.6.1.4.1.2281.10.8.1.5.9.1.1.2 | ColumngenEquipEthernetSwitchEtmQueuesSize | read-write | mandatory | Size of queue[i] |
| 1.3.6.1.4.1.2281.10.8.1.5.10 | NodegenEquipEthernetSwitchEtmWred | |||
| 1.3.6.1.4.1.2281.10.8.1.5.10.1 | ScalargenEquipEthernetSwitchEtmWredAdmin | read-write | mandatory | Enabling/Disabling WRED. |
| 1.3.6.1.4.1.2281.10.8.1.5.10.2 | TablegenEquipEthernetSwitchEtmWredThresholdsTable | not-accessible | mandatory | WRED thresholds per queue. |
| 1.3.6.1.4.1.2281.10.8.1.5.10.2.1 | RowgenEquipEthernetSwitchEtmWredThresholdsEntry | not-accessible | mandatory | WRED entry thresholds per queue. |
| 1.3.6.1.4.1.2281.10.8.1.5.10.2.1.1 | ColumngenEquipEthernetSwitchEtmWredQueuesIndex | read-only | mandatory | WRED thresholds per queue. |
| 1.3.6.1.4.1.2281.10.8.1.5.10.2.1.2 | ColumngenEquipEthernetSwitchEtmWredThresholdsGreenThLow | read-write | mandatory | WRED green low threshold defines the queue level (in Kbits) point that the mechanism should start checking if to drop the green frames. |
| 1.3.6.1.4.1.2281.10.8.1.5.10.2.1.3 | ColumngenEquipEthernetSwitchEtmWredThresholdsGreenThHigh | read-write | mandatory | WRED green high threshold defines the queue level of occupancy (in Kbits) point that the WRED must drop all arriving green colored frames. |
| 1.3.6.1.4.1.2281.10.8.1.5.10.2.1.4 | ColumngenEquipEthernetSwitchEtmWredThresholdsYellowThLow | read-write | mandatory | WRED yellow low threshold defines the queue level (in Kbits) point that the mechanism should start checking if to drop the yellow frames. |
| 1.3.6.1.4.1.2281.10.8.1.5.10.2.1.5 | ColumngenEquipEthernetSwitchEtmWredThresholdsYellowThHigh | read-write | mandatory | WRED yellow high threshold defines the queue level of occupancy (in Kbits) point that the WRED must drop all arriving yellow colored frames. |
| 1.3.6.1.4.1.2281.10.8.1.5.10.2.1.6 | ColumngenEquipEthernetSwitchEtmWredThresholdsGreenMaxDrop | read-write | mandatory | WRED green max drop threshold the probability to drop frame at the green high threshold (in percent based units). |
| 1.3.6.1.4.1.2281.10.8.1.5.10.2.1.7 | ColumngenEquipEthernetSwitchEtmWredThresholdsYellowMaxDrop | read-write | mandatory | WRED yellow max drop threshold the probability to drop frame at the yellow high threshold (in percent based units). |
| 1.3.6.1.4.1.2281.10.8.1.5.11 | NodegenEquipEthernetSwitchEtmMarker | |||
| 1.3.6.1.4.1.2281.10.8.1.5.11.1 | ScalargenEquipEthernetSwitchEtmMarkerAdmin | read-write | mandatory | Enabling/Disabling marking of VLAN P-bits and DEI/CFI bit at the egress. |
| 1.3.6.1.4.1.2281.10.8.1.5.11.2 | TablegenEquipEthernetSwitchEtmMarkerTable | not-accessible | mandatory | Table of CoS and color to Pbits and DEI marking for S-VALNS. |
| 1.3.6.1.4.1.2281.10.8.1.5.11.2.1 | RowgenEquipEthernetSwitchEtmMarkerEntry | not-accessible | mandatory | Table of CoS and color to Pbits and DEI marking for S-VALNS. |
| 1.3.6.1.4.1.2281.10.8.1.5.11.2.1.1 | ColumngenEquipEthernetSwitchEtmMarkerCoS | read-only | mandatory | CoS value as was mapped by the TM calssifier. |
| 1.3.6.1.4.1.2281.10.8.1.5.11.2.1.2 | ColumngenEquipEthernetSwitchEtmMarkerColor | read-only | mandatory | Color value as was mapped by the TM calssifier. |
| 1.3.6.1.4.1.2281.10.8.1.5.11.2.1.3 | ColumngenEquipEthernetSwitchEtmMarkerPbit | read-write | mandatory | VLAN 802.1p P-bit value to be modified. |
| 1.3.6.1.4.1.2281.10.8.1.5.11.2.1.4 | ColumngenEquipEthernetSwitchEtmMarkerCfi | read-write | mandatory | VLAN CFI/DEI value to be modified. |
| 1.3.6.1.4.1.2281.10.8.1.5.12 | NodegenEquipEthernetSwitchEtmScheduler | |||
| 1.3.6.1.4.1.2281.10.8.1.5.12.1 | ScalargenEquipEthernetSwitchEtmSchedulerQuantum | read-write | mandatory | WFQ Quantum for credit calculation in bytes (64, 128, 256, 512). |
| 1.3.6.1.4.1.2281.10.8.1.5.12.2 | TablegenEquipEthernetSwitchEtmSchedulerConfigTable | not-accessible | mandatory | Table for scheduler configuration: priority and weight for each queue. |
| 1.3.6.1.4.1.2281.10.8.1.5.12.2.1 | RowgenEquipEthernetSwitchEtmSchedulerConfigEntry | not-accessible | mandatory | Table entry for scheduler configuration: priority and weight for each queue. |
| 1.3.6.1.4.1.2281.10.8.1.5.12.2.1.1 | ColumngenEquipEthernetSwitchEtmSchedulerConfigQueueIndex | read-only | mandatory | queue index. |
| 1.3.6.1.4.1.2281.10.8.1.5.12.2.1.2 | ColumngenEquipEthernetSwitchEtmSchedulerConfigPriority | read-write | mandatory | Strict priority of each queue. 4=highest , 1=lowest. |
| 1.3.6.1.4.1.2281.10.8.1.5.12.2.1.3 | ColumngenEquipEthernetSwitchEtmSchedulerConfigWeight | read-write | mandatory | WFQ Weights for each queue |
| 1.3.6.1.4.1.2281.10.8.1.5.13 | NodegenEquipEthernetSwitchEtmShaper | |||
| 1.3.6.1.4.1.2281.10.8.1.5.13.1 | ScalargenEquipEthernetSwitchEtmShaperGlobalAdmin | read-write | mandatory | Global Shaper admin disables/enables the global shaping feature. |
| 1.3.6.1.4.1.2281.10.8.1.5.13.2 | TablegenEquipEthernetSwitchEtmShaperConfigTable | not-accessible | mandatory | Table of shapers' configurations. Each shaper is on the egress of a queue.. |
| 1.3.6.1.4.1.2281.10.8.1.5.13.2.1 | RowgenEquipEthernetSwitchEtmShaperConfigEntry | not-accessible | mandatory | Table entry of shapers' configurations. Each shaper is on the egress of a queue.. |
| 1.3.6.1.4.1.2281.10.8.1.5.13.2.1.1 | ColumngenEquipEthernetSwitchEtmShaperConfigIndex | read-only | mandatory | queue index. |
| 1.3.6.1.4.1.2281.10.8.1.5.13.2.1.2 | ColumngenEquipEthernetSwitchEtmShaperConfigAdmin | read-write | mandatory | Egress Shaper admin disables/enables the shaping feature per queue. |
| 1.3.6.1.4.1.2281.10.8.1.5.13.2.1.3 | ColumngenEquipEthernetSwitchEtmShaperConfigCir | read-write | mandatory | Egress shaper CIR value - the committed rate as given by the user. |
| 1.3.6.1.4.1.2281.10.8.1.5.13.2.1.4 | ColumngenEquipEthernetSwitchEtmShaperConfigCbs | read-write | mandatory | Egress shaper committed burst size value. |
| 1.3.6.1.4.1.2281.10.8.1.5.13.2.1.5 | ColumngenEquipEthernetSwitchEtmShaperConfigLineComp | read-write | mandatory | Egress shaper line compensation value transmitted IFG + Preamble. The shaper adds this value to each arriving frame size. |
| 1.3.6.1.4.1.2281.10.8.1.5.14 | NodegenEquipEthernetSwitchEtmStatistics | |||
| 1.3.6.1.4.1.2281.10.8.1.5.14.1 | ScalargenEquipEthernetSwitchEtmStatisticsPortTotalBytesTransmitted | read-only | mandatory | The number of bytes transmitted via the port (goes into PM). |
| 1.3.6.1.4.1.2281.10.8.1.5.14.2 | ScalargenEquipEthernetSwitchEtmStatisticsPortTotalUnicastFramesTransmitted | read-only | mandatory | TThe number of Unicast frames transmitted to the radio port.. |
| 1.3.6.1.4.1.2281.10.8.1.5.14.3 | ScalargenEquipEthernetSwitchEtmStatisticsPortTotalMulticastFramesTransmitted | read-only | mandatory | The number of Multicast frames transmitted to the radio port.. |
| 1.3.6.1.4.1.2281.10.8.1.5.14.4 | ScalargenEquipEthernetSwitchEtmStatisticsPortTotalBroadcastFramesTransmitted | read-only | mandatory | The number of Broadcast frames transmitted to the radio port.. |
| 1.3.6.1.4.1.2281.10.8.1.5.14.5 | ScalargenEquipEthernetSwitchEtmStatisticsPortFrames64octTransmitted | read-only | mandatory | The total number of frames transmitted with a length of exactly 64 Octets. |
| 1.3.6.1.4.1.2281.10.8.1.5.14.6 | ScalargenEquipEthernetSwitchEtmStatisticsPortFrames65to127Transmitted | read-only | mandatory | The total number of frames transmitted with a length of 65-127 Octets. |
| 1.3.6.1.4.1.2281.10.8.1.5.14.7 | ScalargenEquipEthernetSwitchEtmStatisticsPortFrames128to255Transmitted | read-only | mandatory | The total number of frames transmitted with a length of 128-255 Octets. |
| 1.3.6.1.4.1.2281.10.8.1.5.14.8 | ScalargenEquipEthernetSwitchEtmStatisticsPortFrames256to511Transmitted | read-only | mandatory | The total number of frames transmitted with a length of 256-511 Octets). |
| 1.3.6.1.4.1.2281.10.8.1.5.14.9 | ScalargenEquipEthernetSwitchEtmStatisticsPortFrames512to1023Transmitted | read-only | mandatory | TThe total number of frames transmitted with a length of 512-1023 Octets. |
| 1.3.6.1.4.1.2281.10.8.1.5.14.10 | ScalargenEquipEthernetSwitchEtmStatisticsPortFrames1024toMtuTransmitted | read-only | mandatory | The total number of frames transmitted with a length between 1024 and MaxTransmitSize Octets. |
| 1.3.6.1.4.1.2281.10.8.1.6 | NodegenEquipProtocols | |||
| 1.3.6.1.4.1.2281.10.8.1.6.1 | NodegenEquipProtocolsMstp | |||
| 1.3.6.1.4.1.2281.10.8.1.6.1.1 | TablegenEquipProtocolsMstpGeneralAttributesTable | not-accessible | mandatory | A table containing NE configuration and maintenance attributes which are not part of the standard MIB. |
| 1.3.6.1.4.1.2281.10.8.1.6.1.1.1 | RowgenEquipProtocolsMstpGeneralAttributesEntry | not-accessible | mandatory | A table containing NE configuration and maintenance attributes which are not part of the standard MIB. |
| 1.3.6.1.4.1.2281.10.8.1.6.1.1.1.1 | ColumngenEquipProtocolsMstpGeneralAttributesComponentId | read-only | mandatory | Distinguished between multiple virtual bridge instances within a PB or PBB. In simple situations, i.e. single component the default is 1 |
| 1.3.6.1.4.1.2281.10.8.1.6.1.1.1.2 | ColumngenEquipProtocolsMstpGeneralAttributesMstpEnabled | read-write | mandatory | When set, MSTP protocol is enabled on NE |
| 1.3.6.1.4.1.2281.10.8.1.6.1.1.1.3 | ColumngenEquipProtocolsMstpGeneralAttributesNumberOfinstances | read-write | mandatory | Specifies number of instances supported. Value ranges from 2 to 16. |
| 1.3.6.1.4.1.2281.10.8.1.6.1.1.1.4 | ColumngenEquipProtocolsMstpGeneralAttributesMigrateTime | read-only | mandatory | When MSTP bridge detects the presence of STP data on one of its ports, it migrates after 'MigrateTime' has elapsed, if migrate is enabled. |
| 1.3.6.1.4.1.2281.10.8.1.6.1.1.1.5 | ColumngenEquipProtocolsMstpGeneralAttributesBpduDestinationMAC | read-write | mandatory | When set to 'customer', BPDU Dest MAC address should be set to 0x0180-C200-0000. Otherwise, BPDU Dest MAC address should be set to 0x0180-C200-0008 |
| 1.3.6.1.4.1.2281.10.8.1.6.1.1.1.6 | ColumngenEquipProtocolsMstpGeneralAttributesFrozen | read-write | mandatory | When set, MSTP protocol stops running in NE., i.e. BPDU are neither processed nor transmitted. All ports states are maintained. |
| 1.3.6.1.4.1.2281.10.8.1.6.1.1.1.7 | ColumngenEquipProtocolsMstpGeneralAttributesSdHandling | read-write | mandatory | When set to 'ignored', SD (Signal Degrade) failures are ignored in MSTP. Otherwise, SD failures are treated same as SF. |
| 1.3.6.1.4.1.2281.10.8.1.6.1.1.1.8 | ColumngenEquipProtocolsMstpGeneralAttributesReset | read-write | mandatory | When set to reset, MSTP Protocol suit is reset |
| 1.3.6.1.4.1.2281.10.8.1.6.1.1.1.9 | ColumngenEquipProtocolsMstpGeneralAttributesResetCounters | read-write | mandatory | When set to reset, MSTP counters are reset |
| 1.3.6.1.4.1.2281.10.8.1.6.1.2 | TablegenEquipProtocolsMstpCountersTable | not-accessible | mandatory | A table containing MSTP counters per instance per port. |
| 1.3.6.1.4.1.2281.10.8.1.6.1.2.1 | RowgenEquipProtocolsMstpCountersEntry | not-accessible | mandatory | A table containing MSTP counters per instance per port. |
| 1.3.6.1.4.1.2281.10.8.1.6.1.2.1.1 | ColumngenEquipProtocolsMstpCountersPortId | read-only | mandatory | Port ID (ifIndex) |
| 1.3.6.1.4.1.2281.10.8.1.6.1.2.1.2 | ColumngenEquipProtocolsMstpCountersNumberOfReceivedTCN | read-only | mandatory | Number of received TCN |
| 1.3.6.1.4.1.2281.10.8.1.6.1.2.1.3 | ColumngenEquipProtocolsMstpCountersNumberOfReceivedConfigurationBpdu | read-only | mandatory | Number of received Configuration BPDU. |
| 1.3.6.1.4.1.2281.10.8.1.6.1.2.1.4 | ColumngenEquipProtocolsMstpCountersNumberOfReceivedRstBpdu | read-only | mandatory | Number of received RST BPDU. |
| 1.3.6.1.4.1.2281.10.8.1.6.1.2.1.5 | ColumngenEquipProtocolsMstpCountersNumberOfReceivedMstBpdu | read-only | mandatory | Number of received MST BPDU |
| 1.3.6.1.4.1.2281.10.8.1.6.1.2.1.6 | ColumngenEquipProtocolsMstpCountersNumberOfTransmittedTcnBpdu | read-only | mandatory | Number Of Transmitted TCN BPDU. |
| 1.3.6.1.4.1.2281.10.8.1.6.1.2.1.7 | ColumngenEquipProtocolsMstpCountersNumberOfTransmittedConfigurationBpdu | read-only | mandatory | Number of transmitted Configuration BPDU. |
| 1.3.6.1.4.1.2281.10.8.1.6.1.2.1.8 | ColumngenEquipProtocolsMstpCountersNumberOfTransmittedRstBpdu | read-only | mandatory | Number of transmitted RST BPDU |
| 1.3.6.1.4.1.2281.10.8.1.6.1.2.1.9 | ColumngenEquipProtocolsMstpCountersNumberOfTransmittedMstBpdu | read-only | mandatory | Number of transmitted MST BPDU |
| 1.3.6.1.4.1.2281.10.8.1.6.2 | NodegenEquipProtocolsEoam | |||
| 1.3.6.1.4.1.2281.10.8.1.6.2.1 | TablegenEquipProtocolsEoamBwVsmTable | not-accessible | mandatory | A Table containing Ethernet OAM Configuration and Status. |
| 1.3.6.1.4.1.2281.10.8.1.6.2.1.1 | RowgenEquipProtocolsEoamBwVsmEntry | not-accessible | mandatory | A Table entry containing Ethernet OAM Configuration and Status. |
| 1.3.6.1.4.1.2281.10.8.1.6.2.1.1.1 | ColumngenEquipProtocolsEoamBwVsmName | read-only | mandatory | Name of EOAM entity |
| 1.3.6.1.4.1.2281.10.8.1.6.2.1.1.2 | ColumngenEquipProtocolsEoamBwVsmAdmin | read-write | mandatory | Eoam Admin. Possible valuew: Up, Down |
| 1.3.6.1.4.1.2281.10.8.1.6.2.1.1.3 | ColumngenEquipProtocolsEoamBwVsmPeriod | read-write | mandatory | The interval of transmitting messages, when current nominal. |
| 1.3.6.1.4.1.2281.10.8.1.6.2.1.1.4 | ColumngenEquipProtocolsEoamBwVsmCurrentBw | read-only | mandatory | The Current BW measure by 4 samples (with 250msec interval) |
| 1.3.6.1.4.1.2281.10.8.1.6.2.1.1.5 | ColumngenEquipProtocolsEoamBwVsmControlIfindex | read-write | mandatory | Control Interface of the eoam entity |
| 1.3.6.1.4.1.2281.10.8.1.6.2.1.1.6 | ColumngenEquipProtocolsEoamBwVsmId | read-write | mandatory | EOAM index. |
| 1.3.6.1.4.1.2281.10.8.1.6.2.1.1.7 | ColumngenEquipProtocolsEoamBwVsmMonitoredIfindex | read-write | mandatory | Monitored Interface of the eoam entity |
| 1.3.6.1.4.1.2281.10.8.1.6.2.1.1.8 | ColumngenEquipProtocolsEoamBwVsmHoldoff | read-write | mandatory | The holdoff time in which, if BW below nominal, a message is sent |
| 1.3.6.1.4.1.2281.10.8.1.6.2.1.1.9 | ColumngenEquipProtocolsEoamBwVsmHoldoffStartTime | read-only | mandatory | The holdoff start counting time |
| 1.3.6.1.4.1.2281.10.8.1.6.2.1.1.10 | ColumngenEquipProtocolsEoamBwVsmHoldoffState | read-only | mandatory | The holdoff state of the EOAM entity |
| 1.3.6.1.4.1.2281.10.8.1.6.2.1.1.11 | ColumngenEquipProtocolsEoamBwVsmLastSentMsg | read-only | mandatory | The last EOAM message transmitted |
| 1.3.6.1.4.1.2281.10.8.1.6.2.1.1.12 | ColumngenEquipProtocolsEoamBwVsmMel | read-write | mandatory | The MEL to be set in the bw-vsm messages |
| 1.3.6.1.4.1.2281.10.8.1.6.2.1.1.13 | ColumngenEquipProtocolsEoamBwVsmMonitoringInterval | read-write | mandatory | The monitoring interval of the average BE calculation |
| 1.3.6.1.4.1.2281.10.8.1.6.2.1.1.14 | ColumngenEquipProtocolsEoamBwVsmNominalBw | read-only | mandatory | The nominal BW of the monitored interface, to be set in the bw-vsm messages |
| 1.3.6.1.4.1.2281.10.8.1.6.2.1.1.15 | ColumngenEquipProtocolsEoamBwVsmTxMsgCounter | read-only | mandatory | The number of transmitted messages |
| 1.3.6.1.4.1.2281.10.8.1.6.2.1.1.16 | ColumngenEquipProtocolsEoamBwVsmVersion | read-only | mandatory | EOAM version used |
| 1.3.6.1.4.1.2281.10.8.1.6.2.1.1.17 | ColumngenEquipProtocolsEoamBwVsmVlan | read-write | mandatory | The VLAN to be set in the bw-vsm messages |
| 1.3.6.1.4.1.2281.10.8.1.6.2.1.1.18 | ColumngenEquipProtocolsEoamBwVsmResetMsgCounter | read-write | mandatory | Reset Messages Counter |
| 1.3.6.1.4.1.2281.10.8.1.6.2.1.1.30 | ColumngenEquipProtocolsEoamBwVsmRowStatus | read-write | mandatory | Table Mib Row Status. |
| 1.3.6.1.4.1.2281.10.8.1.6.3 | NodegenEquipProtocolsG8032Erpi | |||
| 1.3.6.1.4.1.2281.10.8.1.6.3.1 | ScalargenEquipProtocols8032DestMacAddress | read-write | mandatory | G8032 (Resiliency protocol) destination MAC address |
| 1.3.6.1.4.1.2281.10.8.1.6.3.2 | ScalargenEquipProtocolsG8032NodeId | read-only | mandatory | G.8032 Node ID |
| 1.3.6.1.4.1.2281.10.8.1.6.3.10 | TablegenEquipProtocolsG8032ErpiAttributesTable | not-accessible | mandatory | A table containing ERPI attributes. |
| 1.3.6.1.4.1.2281.10.8.1.6.3.10.1 | RowgenEquipProtocolsG8032ErpiAttributesEntry | not-accessible | mandatory | A table entry containing ERPI attributes. |
| 1.3.6.1.4.1.2281.10.8.1.6.3.10.1.1 | ColumngenEquipProtocolsG8032ErpiAttributesErpiId | read-only | mandatory | ERPI ID |
| 1.3.6.1.4.1.2281.10.8.1.6.3.10.1.2 | ColumngenEquipProtocolsG8032ErpiAttributesErpiName | read-write | mandatory | ERPI Name |
| 1.3.6.1.4.1.2281.10.8.1.6.3.10.1.3 | ColumngenEquipProtocolsG8032ErpiAttributesGuardTime | read-write | mandatory | Indicates the ERPI Guard Time; units are msec, steps are 10msec. |
| 1.3.6.1.4.1.2281.10.8.1.6.3.10.1.4 | ColumngenEquipProtocolsG8032ErpiAttributesHoldoffTime | read-write | mandatory | The ERPI holdoff Time; units are msec, steps are 100msec. Controls the time from failure detection to responding to failure |
| 1.3.6.1.4.1.2281.10.8.1.6.3.10.1.5 | ColumngenEquipProtocolsG8032ErpiAttributesLastChangeTs | read-only | mandatory | Denotes the Timestamp of the last ring state machine transition |
| 1.3.6.1.4.1.2281.10.8.1.6.3.10.1.6 | ColumngenEquipProtocolsG8032ErpiAttributesLastHpRequest | read-only | mandatory | Describes the last high-priority request. |
| 1.3.6.1.4.1.2281.10.8.1.6.3.10.1.7 | ColumngenEquipProtocolsG8032ErpiAttributesLastLocalState | read-only | mandatory | Describes the current local state that is input to the ERPI state machine |
| 1.3.6.1.4.1.2281.10.8.1.6.3.10.1.8 | ColumngenEquipProtocolsG8032ErpiAttributesLastRemoteState | read-only | mandatory | Describes the last event received from the far end |
| 1.3.6.1.4.1.2281.10.8.1.6.3.10.1.9 | ColumngenEquipProtocolsG8032ErpiAttributesMegLevel | read-write | mandatory | Indicates MEG LEVEL, when interoperating with SOAM |
| 1.3.6.1.4.1.2281.10.8.1.6.3.10.1.10 | ColumngenEquipProtocolsG8032ErpiAttributesDownMep | read-only | mandatory | Indicates if the ERPI is related to a down MEP and if to which one |
| 1.3.6.1.4.1.2281.10.8.1.6.3.10.1.11 | ColumngenEquipProtocolsG8032ErpiAttributesRevertive | read-only | mandatory | Indicates whether the ERPI is revertive |
| 1.3.6.1.4.1.2281.10.8.1.6.3.10.1.12 | ColumngenEquipProtocolsG8032ErpiAttributesRingState | read-only | mandatory | Describes the state in which id ERPI is assumed. Possible states are: Initializing, Idle, Pending, Protecting, FS, MS) |
| 1.3.6.1.4.1.2281.10.8.1.6.3.10.1.13 | ColumngenEquipProtocolsG8032ErpiAttributesRplOwner | read-write | mandatory | Indicates whether the ERPI is RPL owner and if such, which ERPI Port is the owner |
| 1.3.6.1.4.1.2281.10.8.1.6.3.10.1.14 | ColumngenEquipProtocolsG8032ErpiAttributesSdHandling | read-write | mandatory | Indicates the ERPI takes into account SD (Signal Degraded) events (BER, capacity degradation) |
| 1.3.6.1.4.1.2281.10.8.1.6.3.10.1.15 | ColumngenEquipProtocolsG8032ErpiAttributesServiceId | read-write | mandatory | Indicates Service ID of the ERPI |
| 1.3.6.1.4.1.2281.10.8.1.6.3.10.1.16 | ColumngenEquipProtocolsG8032ErpiAttributesErpiType | read-write | mandatory | ERPI Type ( ring / sub-ring / ring with sub-ring port) |
| 1.3.6.1.4.1.2281.10.8.1.6.3.10.1.17 | ColumngenEquipProtocolsG8032ErpiAttributesVersion | read-write | mandatory | Indicates the ERPI version number used in the ERPI protocol |
| 1.3.6.1.4.1.2281.10.8.1.6.3.10.1.18 | ColumngenEquipProtocolsG8032ErpiAttributesVirtualChannel | read-write | mandatory | VLAN of virtual channel; 0 denotes no virtual channel |
| 1.3.6.1.4.1.2281.10.8.1.6.3.10.1.19 | ColumngenEquipProtocolsG8032ErpiAttributesWtr | read-write | mandatory | Indicates the ERPI WTR; units are minutes |
| 1.3.6.1.4.1.2281.10.8.1.6.3.10.1.30 | ColumngenEquipProtocolsG8032ErpiAttributesRowStatus | read-write | mandatory | Table Mib Row Status. |
| 1.3.6.1.4.1.2281.10.8.1.6.3.11 | TablegenEquipProtocolsG8032ErpiPortAttributesTable | not-accessible | mandatory | A table containing ERP port attributes. |
| 1.3.6.1.4.1.2281.10.8.1.6.3.11.1 | RowgenEquipProtocolsG8032ErpiPortAttributesEntry | not-accessible | mandatory | A table entry containing ERP port attributes. |
| 1.3.6.1.4.1.2281.10.8.1.6.3.11.1.1 | ColumngenEquipProtocolsG8032ErpiPortAttributesErpiId | read-only | mandatory | Denotes the ERPI ID |
| 1.3.6.1.4.1.2281.10.8.1.6.3.11.1.2 | ColumngenEquipProtocolsG8032ErpiPortAttributesErpiIfindex | read-only | mandatory | g8032_erp_port_sp_index |
| 1.3.6.1.4.1.2281.10.8.1.6.3.11.1.3 | ColumngenEquipProtocolsG8032ErpiPortAttributesActiveState | read-only | mandatory | Denotes if G8032 port (SP) is active for traffic forwarding or not |
| 1.3.6.1.4.1.2281.10.8.1.6.3.11.1.4 | ColumngenEquipProtocolsG8032ErpiPortAttributesDataFwdState | read-only | mandatory | Specifies whether the port is forwarding or blocking data |
| 1.3.6.1.4.1.2281.10.8.1.6.3.11.1.5 | ColumngenEquipProtocolsG8032ErpiPortAttributesDefectState | read-only | mandatory | Defines the ERPI Port Oper-state derived from port. It is updates when Oper-state is changed. |
| 1.3.6.1.4.1.2281.10.8.1.6.3.11.1.6 | ColumngenEquipProtocolsG8032ErpiPortAttributesRapsChannelFwdState | read-only | mandatory | Specifies whether the port is forwarding or blocking raps frames |
| 1.3.6.1.4.1.2281.10.8.1.6.3.11.1.7 | ColumngenEquipProtocolsG8032ErpiPortAttributesRplLinkBlockState | read-only | mandatory | Specifies whether the RPL is in blocking state. relevant only for RPL owner |
| 1.3.6.1.4.1.2281.10.8.1.6.3.11.1.8 | ColumngenEquipProtocolsG8032ErpiPortAttributesRxInvalidRapsFrames | read-only | mandatory | Number of invalid R-APS PDU received |
| 1.3.6.1.4.1.2281.10.8.1.6.3.11.1.9 | ColumngenEquipProtocolsG8032ErpiPortAttributesRxRapsEvents | read-only | mandatory | Number of events R-APS PDU received |
| 1.3.6.1.4.1.2281.10.8.1.6.3.11.1.10 | ColumngenEquipProtocolsG8032ErpiPortAttributesRxRapsFrames | read-only | mandatory | Number of R-APS PDU received |
| 1.3.6.1.4.1.2281.10.8.1.6.3.11.1.11 | ColumngenEquipProtocolsG8032ErpiPortAttributesFs | read-only | mandatory | Number of FS PDU received |
| 1.3.6.1.4.1.2281.10.8.1.6.3.11.1.12 | ColumngenEquipProtocolsG8032ErpiPortAttributesMs | read-only | mandatory | Number of MS PDU received |
| 1.3.6.1.4.1.2281.10.8.1.6.3.11.1.13 | ColumngenEquipProtocolsG8032ErpiPortAttributesNr | read-only | mandatory | Number of NR R-APS PDU received |
| 1.3.6.1.4.1.2281.10.8.1.6.3.11.1.14 | ColumngenEquipProtocolsG8032ErpiPortAttributesRb | read-only | mandatory | Number of RB R-APS PDU received |
| 1.3.6.1.4.1.2281.10.8.1.6.3.11.1.15 | ColumngenEquipProtocolsG8032ErpiPortAttributesSd | read-only | mandatory | Number of SD R-APS PDU received |
| 1.3.6.1.4.1.2281.10.8.1.6.3.11.1.17 | ColumngenEquipProtocolsG8032ErpiPortAttributesSf | read-only | mandatory | Number of SF R-APS PDU received |
| 1.3.6.1.4.1.2281.10.8.1.6.3.11.1.18 | ColumngenEquipProtocolsG8032ErpiPortAttributesCapacityDegRatioThreshold | read-only | mandatory | The capacity degradation threshold, in percentage, from which SD is indicated from this ERPI Port |
| 1.3.6.1.4.1.2281.10.8.1.6.3.11.1.19 | ColumngenEquipProtocolsG8032ErpiPortAttributesSpId | read-write | mandatory | Service Point ID |
| 1.3.6.1.4.1.2281.10.8.1.6.3.11.1.20 | ColumngenEquipProtocolsG8032ErpiPortAttributesTxRapsCntrol | read-only | mandatory | When value is False, R-APS are not transmitted by ERPI Port |
| 1.3.6.1.4.1.2281.10.8.1.6.3.11.1.21 | ColumngenEquipProtocolsG8032ErpiPortAttributesTxRapsEvents | read-only | mandatory | Number of events R-APS PDU transmitted |
| 1.3.6.1.4.1.2281.10.8.1.6.3.11.1.22 | ColumngenEquipProtocolsG8032ErpiPortAttributesTxRapsFrames | read-only | mandatory | Number of Total R-APS PDU transmitted |
| 1.3.6.1.4.1.2281.10.8.1.6.3.11.1.23 | ColumngenEquipProtocolsG8032ErpiPortAttributesTxRapsFs | read-only | mandatory | Number of FS R-APS PDU transmitted |
| 1.3.6.1.4.1.2281.10.8.1.6.3.11.1.24 | ColumngenEquipProtocolsG8032ErpiPortAttributesTxRapsMs | read-only | mandatory | Number of MS R-APS PDU transmitted |
| 1.3.6.1.4.1.2281.10.8.1.6.3.11.1.25 | ColumngenEquipProtocolsG8032ErpiPortAttributesTxRapsNr | read-only | mandatory | Number of NR R-APS PDU transmitted |
| 1.3.6.1.4.1.2281.10.8.1.6.3.11.1.26 | ColumngenEquipProtocolsG8032ErpiPortAttributesTxRapsRb | read-only | mandatory | Number of RB R-APS PDU transmitted |
| 1.3.6.1.4.1.2281.10.8.1.6.3.11.1.27 | ColumngenEquipProtocolsG8032ErpiPortAttributesTxRapsSd | read-only | mandatory | Number of SD R-APS PDU transmitted |
| 1.3.6.1.4.1.2281.10.8.1.6.3.11.1.28 | ColumngenEquipProtocolsG8032ErpiPortAttributesTxRapsSf | read-only | mandatory | Number of SF R-APS PDU transmitted |
| 1.3.6.1.4.1.2281.10.8.1.6.3.11.1.29 | ColumngenEquipProtocolsG8032ErpiPortAttributesClearCommand | read-write | mandatory | Clear Command |
| 1.3.6.1.4.1.2281.10.8.1.6.3.11.1.30 | ColumngenEquipProtocolsG8032ErpiPortAttributesRowStatus | read-write | mandatory | Table Mib Row Status |
| 1.3.6.1.4.1.2281.10.8.1.6.3.11.1.31 | ColumngenEquipProtocolsG8032ErpiPortAttributesFsCommand | read-write | mandatory | Force Switch (FS) |
| 1.3.6.1.4.1.2281.10.8.1.6.3.11.1.32 | ColumngenEquipProtocolsG8032ErpiPortAttributesMsCommand | read-write | mandatory | Manual Switch (MS) |
| 1.3.6.1.4.1.2281.10.8.1.6.4 | NodegenEquipProtocolsSoam | |||
| 1.3.6.1.4.1.2281.10.8.1.6.4.10 | TablegenEquipProtocolsSoamMepTable | not-accessible | mandatory | A table containg MEP attributes. |
| 1.3.6.1.4.1.2281.10.8.1.6.4.10.1 | RowgenEquipProtocolsSoamMepEntry | not-accessible | mandatory | A table entry containg MEP attributes. |
| 1.3.6.1.4.1.2281.10.8.1.6.4.10.1.1 | ColumngenEquipProtocolsSoamMepMdIndex | read-only | mandatory | MD Index |
| 1.3.6.1.4.1.2281.10.8.1.6.4.10.1.2 | ColumngenEquipProtocolsSoamMepMaIndex | read-only | mandatory | MA/MEG Index |
| 1.3.6.1.4.1.2281.10.8.1.6.4.10.1.3 | ColumngenEquipProtocolsSoamMepMepIndentifier | read-only | mandatory | MEP ID |
| 1.3.6.1.4.1.2281.10.8.1.6.4.10.1.4 | ColumngenEquipProtocolsSoamMepSpId | read-write | mandatory | Service Point ID |
| 1.3.6.1.4.1.2281.10.8.1.6.4.10.1.5 | ColumngenEquipProtocolsSoamMepLastSessionLbmOut | read-only | mandatory | Number of LBM frames transmitted during the current/last session |
| 1.3.6.1.4.1.2281.10.8.1.6.4.10.1.6 | ColumngenEquipProtocolsSoamMepLastSessionlbmToSend | read-only | mandatory | Number of LBM frames left to send in the session |
| 1.3.6.1.4.1.2281.10.8.1.6.4.10.1.7 | ColumngenEquipProtocolsSoamMepLastSessionLbrIn | read-only | mandatory | Number of LBR messages received during the current/last session |
| 1.3.6.1.4.1.2281.10.8.1.6.4.10.1.8 | ColumngenEquipProtocolsSoamMepLastSessionlbState | read-only | mandatory | Specifies the loopback session State |
| 1.3.6.1.4.1.2281.10.8.1.6.4.10.1.9 | ColumngenEquipProtocolsSoamMepLbmOut | read-only | mandatory | Specifies the mumber of the LBM frames transmitted |
| 1.3.6.1.4.1.2281.10.8.1.6.4.11 | TablegenEquipProtocolsSoamMegTable | not-accessible | mandatory | A table containing SOAM MA/MEG network identical attributes common to 802.1ag. |
| 1.3.6.1.4.1.2281.10.8.1.6.4.11.1 | RowgenEquipProtocolsSoamMegEntry | not-accessible | mandatory | A table entry containing SOAM MA/MEG network identical attributes common to 802.1ag. |
| 1.3.6.1.4.1.2281.10.8.1.6.4.11.1.1 | ColumngenEquipProtocolsSoamMegMdIndex | read-only | mandatory | MD Index |
| 1.3.6.1.4.1.2281.10.8.1.6.4.11.1.2 | ColumngenEquipProtocolsSoamMegMaIndex | read-only | mandatory | MA/MEG Index |
| 1.3.6.1.4.1.2281.10.8.1.6.4.11.1.3 | ColumngenEquipProtocolsSoamMegServiceId | read-write | mandatory | Service ID |
| 1.3.6.1.4.1.2281.10.8.2 | NodegenEquipTdmTrails | |||
| 1.3.6.1.4.1.2281.10.8.2.1 | TablegenEquipTdmTrailsTable | not-accessible | mandatory | TDM Trails configuration and status table. |
| 1.3.6.1.4.1.2281.10.8.2.1.1 | RowgenEquipTdmTrailsEntry | not-accessible | mandatory | TDM Trails PM table. |
| 1.3.6.1.4.1.2281.10.8.2.1.1.1 | ColumngenEquipTdmTrailID | read-write | mandatory | The Trail ID. This parameter is the index of the table. |
| 1.3.6.1.4.1.2281.10.8.2.1.1.2 | ColumngenEquipTdmTrailDescr | read-write | mandatory | Trail description. |
| 1.3.6.1.4.1.2281.10.8.2.1.1.3 | ColumngenEquipTdmTrailProtected | read-write | mandatory | This parameter indicates whether the trail is protected or not. |
| 1.3.6.1.4.1.2281.10.8.2.1.1.4 | ColumngenEquipTdmTrailAcmPrio | read-write | mandatory | The ACM priority of the trail. In case of High priority TDM trail, ACM is enabled on the link and there is a reduction of the link capacity, this trail will be… |
| 1.3.6.1.4.1.2281.10.8.2.1.1.5 | ColumngenEquipTdmTrailOperStatus | read-write | mandatory | The status of the TDM trail. in operational case, the trail is active/enabled and send alarms. |
| 1.3.6.1.4.1.2281.10.8.2.1.1.6 | ColumngenEquipTdmTrailAlarmStatus | read-only | mandatory | The alarm status of the trail active path. The value is a Bit Map: Id-Mismatch(0x01), Excessive-Ber(0x02), Signal-Degrade-Ber(0x04), Invalid-Trail-Status(0x08)… |
| 1.3.6.1.4.1.2281.10.8.2.1.1.7 | ColumngenEquipTdmTrailSrcSlot | read-write | mandatory | Trail source slot number. |
| 1.3.6.1.4.1.2281.10.8.2.1.1.8 | ColumngenEquipTdmTrailSrcType | read-write | mandatory | The type of the source interface of the trail line(0), radio(1),stm-1-oc-3(2), sync(4). |
| 1.3.6.1.4.1.2281.10.8.2.1.1.9 | ColumngenEquipTdmTrailSrcNum | read-write | mandatory | The interface number, for example E1 number 5. in case of a line. |
| 1.3.6.1.4.1.2281.10.8.2.1.1.10 | ColumngenEquipTdmTrailDest1Slot | read-write | mandatory | The slot destination of the trail. |
| 1.3.6.1.4.1.2281.10.8.2.1.1.11 | ColumngenEquipTdmTrailDest1Type | read-write | mandatory | The interface type destination of the trail. |
| 1.3.6.1.4.1.2281.10.8.2.1.1.12 | ColumngenEquipTdmTrailDest1Num | read-write | mandatory | The destination interface number. |
| 1.3.6.1.4.1.2281.10.8.2.1.1.13 | ColumngenEquipTdmTrailDest2Slot | read-write | mandatory | A secondary slot number that is being used when protection is enabled. |
| 1.3.6.1.4.1.2281.10.8.2.1.1.14 | ColumngenEquipTdmTrailDest2Type | read-write | mandatory | A secondary interface type that is being used when protection is enabled. |
| 1.3.6.1.4.1.2281.10.8.2.1.1.15 | ColumngenEquipTdmTrailDest2Num | read-write | mandatory | A secondary interface number that is being used when protection is enabled. |
| 1.3.6.1.4.1.2281.10.8.2.1.1.16 | ColumngenEquipTdmTrailProtectedForceActive | read-write | mandatory | Force active of the primary or the secondary trails. |
| 1.3.6.1.4.1.2281.10.8.2.1.1.17 | ColumngenEquipTdmTrailProtectedActiveTrail | read-only | mandatory | The trail current active path. That tells us Who is the active trail. |
| 1.3.6.1.4.1.2281.10.8.2.1.1.18 | ColumngenEquipTdmTrailProtectedNumOfSwitches | read-only | mandatory | The value represent the number of switches in SNCP between the primary and secondary trails. Setting this value to 0, clears this counter |
| 1.3.6.1.4.1.2281.10.8.2.1.1.19 | ColumngenEquipTdmTrailPrimaryPathAlarmStatus | read-only | mandatory | The alarm status of the trail primary path. The value is a Bit Map: Id-Mismatch(0x01), Excessive-Ber(0x02), Signal-Degrade-Ber(0x04), Invalid-Trail-Status(0x08… |
| 1.3.6.1.4.1.2281.10.8.2.1.1.20 | ColumngenEquipTdmTrailSecondaryPathAlarmStatus | read-only | mandatory | The alarm status of the trail secondary path. The value is a Bit Map: Id-Mismatch(0x01), Excessive-Ber(0x02), Signal-Degrade-Ber(0x04), Invalid-Trail-Status(0x… |
| 1.3.6.1.4.1.2281.10.8.2.1.1.30 | ColumngenEquipTdmTrailRowStatus | read-write | mandatory | The Row status of the entry. |
| 1.3.6.1.4.1.2281.10.8.2.2 | ScalargenEquipTdmTrailsProtectedForceActiveAllCmd | read-write | mandatory | Force all active trails to be either primary or secondary. |
| 1.3.6.1.4.1.2281.10.8.2.3 | ScalargenEquipTdmTrailsProtectedForceOperationalOrReservedCmd | read-write | mandatory | Force all active trails to be either operational or reserved. |
| 1.3.6.1.4.1.2281.10.8.2.4 | ScalargenEquipTdmTrailsProtectedRevertiveSwitchTimeout | read-write | mandatory | The revertive switch timeout in seconds for revertive protected trails. |
| 1.3.6.1.4.1.2281.10.8.2.5 | ScalargenEquipTdmTrailsSwitchCounterClear | read-write | mandatory | This parameter will clear the counter for protected switches. |
| 1.3.6.1.4.1.2281.10.8.2.6 | ScalargenEquipTdmTrailsDeleteAllTrails | read-write | mandatory | This parameter will delete all existing trails. |
| 1.3.6.1.4.1.2281.10.8.3 | NodegenEquipSynchronization | |||
| 1.3.6.1.4.1.2281.10.8.3.1 | TablegenEquipSynchronizationSrcTable | not-accessible | mandatory | Synchronization source table. |
| 1.3.6.1.4.1.2281.10.8.3.1.1 | RowgenEquipSynchronizationSrcEntry | not-accessible | mandatory | Synchronization source table. |
| 1.3.6.1.4.1.2281.10.8.3.1.1.1 | ColumngenEquipSynchronizationSrcPriority | read-only | mandatory | The source for system synchronization (primary, seconday). |
| 1.3.6.1.4.1.2281.10.8.3.1.1.2 | ColumngenEquipSynchronizationSrcSlot | read-write | mandatory | The slot number of the sync source (1..6). Possible values: - standalone(0) - slot1(1) - slot2(2) - slot3(3) - slot4(4) - slot5(5) - slot6(6) |
| 1.3.6.1.4.1.2281.10.8.3.1.1.3 | ColumngenEquipSynchronizationSrcType | read-write | mandatory | The interface type (line (PDH), Radio, STM-1/OC-3), or signal coming from the PW card. |
| 1.3.6.1.4.1.2281.10.8.3.1.1.4 | ColumngenEquipSynchronizationSrcNum | read-write | mandatory | The sync source number: VC in STM-1/OC-3, Radio channel in case the interface is Radio, or E1 number in case the interface is PDH (E1s). |
| 1.3.6.1.4.1.2281.10.8.3.1.1.5 | ColumngenEquipSynchronizationSrcValid | read-only | mandatory | This paremter is the source status, if the source if valid or not. In case it is valid, it means that the clock being extracted from the source is ok and can b… |
| 1.3.6.1.4.1.2281.10.8.3.1.1.6 | ColumngenEquipSynchronizationSrcTrail | read-write | mandatory | This parameter indicates whether the synchronization source is the signal of an existing co-located TDM trail used for traffic. Enabling this parameter in an i… |
| 1.3.6.1.4.1.2281.10.8.3.1.1.7 | ColumngenEquipSynchronizationSrcAdmin | read-write | mandatory | Admin state of the sync source (the sync source is enabled or disabled). |
| 1.3.6.1.4.1.2281.10.8.3.1.1.8 | ColumngenEquipSynchronizationSrcQuality | read-write | mandatory | parameter configures the quality of the incoming clock signal. |
| 1.3.6.1.4.1.2281.10.8.3.1.1.9 | ColumngenEquipSynchronizationSrcReceivedSSM | read-only | mandatory | This parameter shows the current value of the received SSM messages. |
| 1.3.6.1.4.1.2281.10.8.3.1.1.10 | ColumngenEquipSynchronizationSrcQualityStatus | read-only | mandatory | This parameter shows the current quality level of the interface. |
| 1.3.6.1.4.1.2281.10.8.3.3 | ScalargenEquipSynchronizationRadioClkSrcSource | read-write | mandatory | This parameters determines whether the system reference frequency is transported through the radio. 0 indicates that the outgoing signal takes its clock from a… |
| 1.3.6.1.4.1.2281.10.8.3.4 | ScalargenEquipSynchronizationSDHClkSrcSource | read-write | mandatory | This parameters determines whether the system reference frequency is transported through the interface. if value is 0 it indicates that the outgoing signal tak… |
| 1.3.6.1.4.1.2281.10.8.3.5 | TablegenEquipSynchronizationPDHClkSrcTable | not-accessible | mandatory | Synchronization source table. |
| 1.3.6.1.4.1.2281.10.8.3.5.1 | RowgenEquipSynchronizationPDHClkSrcEntry | not-accessible | mandatory | Synchronization source table. |
| 1.3.6.1.4.1.2281.10.8.3.5.1.2 | ColumngenEquipSynchronizationPDHClkSrcIFNum | read-write | mandatory | This parameters the interface which is configured to take the system reference clock or a local clock in genEquipSynchronizationSDHClkSrcSource. The number ind… |
| 1.3.6.1.4.1.2281.10.8.3.5.1.3 | ColumngenEquipSynchronizationPDHClkSrcSource | read-write | mandatory | This parameters determines whether the system reference frequency is transported through the interface defined in genEquipSynchronizationPDHClkSrcIFNum. local-… |
| 1.3.6.1.4.1.2281.10.8.3.6 | ScalargenEquipSynchronizationPRCRegeneratorMode | read-write | mandatory | This parameter sets the IDU to point-to-point PRC quality frequency distribution mode. Notice that this is relevant only for smart pipe applications |
| 1.3.6.1.4.1.2281.10.8.3.7 | ScalargenEquipSynchronizationPRCRegeneratorDirection | read-write | mandatory | This parameter sets the direction in which the frequency signal is transported, in the case of electrical GBE interfaces. Notice that for optical interfaces, t… |
| 1.3.6.1.4.1.2281.10.8.3.8 | ScalargenEquipSynchronizationSrcRevertiveTimer | read-write | mandatory | this parameter sets the timeout (in seconds) for a counter which is set once an interface recovers from a failure; after this timeout the interface will be con… |
| 1.3.6.1.4.1.2281.10.8.3.9 | ScalargenEquipSynchronizationSrcActiveSyncSourceIndex | read-only | mandatory | The active synchronization source. |
| 1.3.6.1.4.1.2281.10.8.3.10 | ScalargenEquipSynchronizationNodeMode | read-write | mandatory | This parameter allows forcing a certain source as the active source for the system reference clock. When forced, the active source is specified by genEquipSync… |
| 1.3.6.1.4.1.2281.10.8.3.11 | ScalargenEquipSynchronizationForceSource | read-write | mandatory | This parameter determines which source number will be forced as active when genEquipSynchronizationNodeMode is set to force. |
| 1.3.6.1.4.1.2281.10.8.3.12 | ScalargenEquipSynchronizationSystemReferenceQuality | read-only | mandatory | This parameter shows the current quality of the system reference clock |
| 1.3.6.1.4.1.2281.10.8.3.13 | ScalargenEquipSynchronizationRegeneratorSSMAdmin | read-write | mandatory | This parameter determines whether or not in pipe mode the system generates SSM messages |
| 1.3.6.1.4.1.2281.10.8.3.14 | ScalargenEquipSynchronizationPWClkExport | read-write | mandatory | This parameter determines whether the system reference clock is exported toward the PWE3 T-Card; This reference can be exported towards front panel using Expor… |
| 1.3.6.1.4.1.2281.10.8.3.20 | TablegenEquipSynchronizationPipeTable | not-accessible | mandatory | The table shows pipe interfaces. |
| 1.3.6.1.4.1.2281.10.8.3.20.1 | RowgenEquipSynchronizationPipeEntry | not-accessible | mandatory | The table entry shows pipe interfaces. |
| 1.3.6.1.4.1.2281.10.8.3.20.1.1 | ColumngenEquipSynchronizationPipeId | read-only | mandatory | Pipe ID. |
| 1.3.6.1.4.1.2281.10.8.3.20.1.2 | ColumngenEquipSynchronizationPipeInd1 | read-write | mandatory | Sync Interface 1. |
| 1.3.6.1.4.1.2281.10.8.3.20.1.3 | ColumngenEquipSynchronizationPipeInd2 | read-write | mandatory | Sync Interface 2. |
| 1.3.6.1.4.1.2281.10.8.3.20.1.4 | ColumngenEquipSynchronizationPipeStatus | read-write | mandatory | Sync Pipe Status. |
| 1.3.6.1.4.1.2281.10.8.3.21 | NodegenEquipSynchronizationPTP | |||
| 1.3.6.1.4.1.2281.10.8.3.21.1 | ScalargenEquipSynchronizationPTPTcAdmin | read-write | mandatory | Transparent Clock (TC) administrative state. |
| 1.3.6.1.4.1.2281.10.8.3.21.10 | TablegenEquipSynchronizationPTPTcConfigTable | not-accessible | mandatory | PTP (Precision Time Protocol) TC (Transparent Clock) configuration table. |
| 1.3.6.1.4.1.2281.10.8.3.21.10.1 | RowgenEquipSynchronizationPTPTcConfigEntry | not-accessible | mandatory | PTP (Precision Time Protocol) TC (Transparent Clock) configuration table entry. |
| 1.3.6.1.4.1.2281.10.8.3.21.10.1.1 | ColumngenEquipSynchronizationPTPTcConfigId | read-write | mandatory | The interface on which TC function is required. |
| 1.3.6.1.4.1.2281.10.8.3.21.10.1.2 | ColumngenEquipSynchronizationPTPTcConfigMaster | read-write | mandatory | Points whether the interface's direction is upstream or downstream. |
| 1.3.6.1.4.1.2281.10.8.3.21.11 | TablegenEquipSynchronizationPTPTcStatusTable | not-accessible | mandatory | PTP (Precision Time Protocol) TC (Transparent Clock) status table. |
| 1.3.6.1.4.1.2281.10.8.3.21.11.1 | RowgenEquipSynchronizationPTPTcStatusEntry | not-accessible | mandatory | PTP (Precision Time Protocol) TC (Transparent Clock) status table entry. |
| 1.3.6.1.4.1.2281.10.8.3.21.11.1.1 | ColumngenEquipSynchronizationPTPTcStatusId | read-only | mandatory | The interface on which TC status is required. |
| 1.3.6.1.4.1.2281.10.8.3.21.11.1.2 | ColumngenEquipSynchronizationPTPTcStatusState | read-only | mandatory | The status of the TC function that may be: Down, Init, Calibrating or Up. |
| 1.3.6.1.4.1.2281.10.8.3.21.11.1.3 | ColumngenEquipSynchronizationPTPTcStatusFreqLock | read-only | mandatory | The lock status, Up or Down, of the network synchronization frequency that passes through the interface. |
| 1.3.6.1.4.1.2281.10.8.4 | NodegenEquipServicesPW | |||
| 1.3.6.1.4.1.2281.10.8.4.1 | TablegenEquipServicesPWBundlesTable | not-accessible | mandatory | This table allows configuration of DS0 bundles. Notice that the bundle description is not located in this table but in table genEquipServicesPWBundlesDescripti… |
| 1.3.6.1.4.1.2281.10.8.4.1.1 | RowgenEquipServicesPWBundlesEntry | not-accessible | mandatory | This table allows configuration of DS0 bundles. Notice that the bundle description is not located in this table but in table genEquipServicesPWBundlesDescripti… |
| 1.3.6.1.4.1.2281.10.8.4.1.1.1 | ColumngenEquipServicesPWBundlesBundleId | read-write | mandatory | Unique DS0 bundle ID. |
| 1.3.6.1.4.1.2281.10.8.4.1.1.2 | ColumngenEquipServicesPWBundlesDs0List | read-write | mandatory | DS0 slot number belonging to a bundle. |
| 1.3.6.1.4.1.2281.10.8.4.1.1.30 | ColumngenEquipServicesPWBundlesRowStatus | read-write | mandatory | This value is the status of the entry. |
| 1.3.6.1.4.1.2281.10.8.4.2 | TablegenEquipServicesPWBundlesDescriptionTable | not-accessible | mandatory | This table allows configuration of DS0 bundles description. Notice that the bundle configuration itself is not located in this table but in table genEquipServi… |
| 1.3.6.1.4.1.2281.10.8.4.2.1 | RowgenEquipServicesPWBundlesDescriptionEntry | not-accessible | mandatory | This table allows configuration of DS0 bundles description. Notice that the bundle configuration itself is not located in this table but in table genEquipServi… |
| 1.3.6.1.4.1.2281.10.8.4.2.1.1 | ColumngenEquipServicesPWBundlesDescriptionBundleId | read-write | mandatory | Unique DS0 bundle ID. |
| 1.3.6.1.4.1.2281.10.8.4.2.1.2 | ColumngenEquipServicesPWBundlesDescriptionBundleDesc | read-write | mandatory | DS0 bundle description. |
| 1.3.6.1.4.1.2281.10.8.4.2.1.3 | ColumngenEquipServicesPWBundlesDescriptionBundleAdmin | read-write | mandatory | Admin. |
| 1.3.6.1.4.1.2281.10.8.4.2.1.4 | ColumngenEquipServicesPWBundlesDescriptionBundleOperStatus | read-only | mandatory | Operational status. |
| 1.3.6.1.4.1.2281.10.8.4.2.1.5 | ColumngenEquipServicesPWBundlesDescriptionBundleTdmPort | read-write | mandatory | TDM port from which the channels are assigned to the bundle. |
| 1.3.6.1.4.1.2281.10.8.4.2.1.30 | ColumngenEquipServicesPWBundlesDescriptionRowStatus | read-write | mandatory | This value is the status of the entry. |
| 1.3.6.1.4.1.2281.10.8.4.3 | TablegenEquipServicesPWPSNTunnelsTable | not-accessible | mandatory | This table allows configuration of PSN encapsulations meant for pseudowire services. |
| 1.3.6.1.4.1.2281.10.8.4.3.1 | RowgenEquipServicesPWPSNTunnelsEntry | not-accessible | mandatory | This table allows configuration of PSN encapsulations meant for pseudowire services. |
| 1.3.6.1.4.1.2281.10.8.4.3.1.1 | ColumngenEquipServicesPWPSNTunnelsSlotNumber | read-write | mandatory | Slot number where the relevant PW card is inserted. |
| 1.3.6.1.4.1.2281.10.8.4.3.1.2 | ColumngenEquipServicesPWPSNTunnelsTunnelId | read-write | mandatory | PSN tunnel ID. |
| 1.3.6.1.4.1.2281.10.8.4.3.1.3 | ColumngenEquipServicesPWPSNTunnelsPsnType | read-write | mandatory | Psn type supported by this tunnel. |
| 1.3.6.1.4.1.2281.10.8.4.3.1.4 | ColumngenEquipServicesPWPSNTunnelsSVid | read-write | mandatory | PSN Tunnel S-VLAN Id. |
| 1.3.6.1.4.1.2281.10.8.4.3.1.5 | ColumngenEquipServicesPWPSNTunnelsCVid | read-write | mandatory | PSN Tunnel C-VLAN Id. |
| 1.3.6.1.4.1.2281.10.8.4.3.1.6 | ColumngenEquipServicesPWPSNTunnelsPBits | read-write | mandatory | PSN Tunnel P-bits. |
| 1.3.6.1.4.1.2281.10.8.4.3.1.7 | ColumngenEquipServicesPWPSNTunnelsDestIpAddr | read-write | mandatory | Destination IP Address for UDP/IP PSN tunnel. |
| 1.3.6.1.4.1.2281.10.8.4.3.1.8 | ColumngenEquipServicesPWPSNTunnelsDestIpSubnet | read-write | mandatory | Destination IP Subnet for UDP/IP PSN tunnel. |
| 1.3.6.1.4.1.2281.10.8.4.3.1.9 | ColumngenEquipServicesPWPSNTunnelsNextHopIp | read-write | mandatory | Next hop IP Address for UDP/IP PSN tunnel. |
| 1.3.6.1.4.1.2281.10.8.4.3.1.10 | ColumngenEquipServicesPWPSNTunnelsTosDscp | read-write | mandatory | PSN Tunnel ToS (DSCP). |
| 1.3.6.1.4.1.2281.10.8.4.3.1.11 | ColumngenEquipServicesPWPSNTunnelsRemoteMacAddr | read-write | mandatory | Remote MAC Adress. |
| 1.3.6.1.4.1.2281.10.8.4.3.1.12 | ColumngenEquipServicesPWPSNTunnelsSourceIpAddr | read-write | mandatory | Source IP Address. |
| 1.3.6.1.4.1.2281.10.8.4.3.1.13 | ColumngenEquipServicesPWPSNTunnelsSourceMacAddr | read-write | mandatory | Source MAC Address. |
| 1.3.6.1.4.1.2281.10.8.4.3.1.14 | ColumngenEquipServicesPWPSNTunnelsStatus | read-write | mandatory | PSN tunnel admin. |
| 1.3.6.1.4.1.2281.10.8.4.3.1.15 | ColumngenEquipServicesPWPSNTunnelsSourceMPLSLabel | read-write | mandatory | Source MPLS Label. |
| 1.3.6.1.4.1.2281.10.8.4.3.1.16 | ColumngenEquipServicesPWPSNTunnelsDestinationMPLSLabel | read-write | mandatory | Destination MPLS label. |
| 1.3.6.1.4.1.2281.10.8.4.3.1.17 | ColumngenEquipServicesPWPSNTunnelsMPLSexp | read-write | mandatory | MPLS Experimental field. |
| 1.3.6.1.4.1.2281.10.8.4.3.1.18 | ColumngenEquipServicesPWPSNTunnelsVlanType | read-write | mandatory | VLAN type supported by this PSN tunnel (S-VLAN or C-VLAN). |
| 1.3.6.1.4.1.2281.10.8.4.3.1.19 | ColumngenEquipServicesPWPSNTunnelsVid | read-write | mandatory | PSN Tunnel VLAN ID. |
| 1.3.6.1.4.1.2281.10.8.4.3.1.20 | ColumngenEquipServicesPWPSNTunnelsMAid | read-write | mandatory | Maintenance Association Id. |
| 1.3.6.1.4.1.2281.10.8.4.3.1.30 | ColumngenEquipServicesPWPSNTunnelsRowStatus | read-write | mandatory | This value is the status of the entry. |
| 1.3.6.1.4.1.2281.10.8.4.4 | TablegenEquipServicesPWProfilesTable | not-accessible | mandatory | This table allows configuration of pseudowire profiles. These profiles are used when configuring PW services in table genEquipServicesPWServiceTable. |
| 1.3.6.1.4.1.2281.10.8.4.4.1 | RowgenEquipServicesPWProfilesEntry | not-accessible | mandatory | This table allows configuration of pseudowire profiles. These profiles are used when configuring PW services in table genEquipServicesPWServiceTable. |
| 1.3.6.1.4.1.2281.10.8.4.4.1.1 | ColumngenEquipServicesPWProfilesPWProfileId | read-only | mandatory | Unique PW profile ID. |
| 1.3.6.1.4.1.2281.10.8.4.4.1.2 | ColumngenEquipServicesPWProfilesPayloadSize | read-write | mandatory | Payload size in bytes. |
| 1.3.6.1.4.1.2281.10.8.4.4.1.3 | ColumngenEquipServicesPWProfilesJitterBufferDepth | read-write | mandatory | Jitter buffer depth (in milliseconds) to allow accommodation to the PSN-specific packet delay variation |
| 1.3.6.1.4.1.2281.10.8.4.4.1.4 | ColumngenEquipServicesPWProfilesLopsDetection | read-write | mandatory | If enabled, LOPS detection is supported. |
| 1.3.6.1.4.1.2281.10.8.4.4.1.5 | ColumngenEquipServicesPWProfilesRtpHeaderUsed | read-write | mandatory | If set to False: an RTP header is not pre-pended to the TDM packet. |
| 1.3.6.1.4.1.2281.10.8.4.4.1.6 | ColumngenEquipServicesPWProfilesRtpTimestampMode | read-write | mandatory | RTP timestamp mode |
| 1.3.6.1.4.1.2281.10.8.4.4.1.7 | ColumngenEquipServicesPWProfilesRtpTimestampAbsFactor | read-write | mandatory | Multiplication factor for 8KHz units in absolute mode of RTP timestamping. |
| 1.3.6.1.4.1.2281.10.8.4.4.1.8 | ColumngenEquipServicesPWProfilesPayloadSuppression | read-write | mandatory | Payload suppression. |
| 1.3.6.1.4.1.2281.10.8.4.4.1.9 | ColumngenEquipServicesPWProfilesPayloadType | read-write | mandatory | Payload type. |
| 1.3.6.1.4.1.2281.10.8.4.4.1.10 | ColumngenEquipServicesPWProfilesConseqPacketsInSync | read-write | mandatory | Number of consecutive packets with sequential sequence numbers required to exit LOPS. |
| 1.3.6.1.4.1.2281.10.8.4.4.1.11 | ColumngenEquipServicesPWProfilesConseqMissPktsOutSync | read-write | mandatory | Number of consecutive missing packets required to enter LOPS. |
| 1.3.6.1.4.1.2281.10.8.4.4.1.12 | ColumngenEquipServicesPWProfilesPktLossTimeWindow | read-write | mandatory | Time for computing average packet loss rate to detect excessive packet loss. |
| 1.3.6.1.4.1.2281.10.8.4.4.1.13 | ColumngenEquipServicesPWProfilesExcessivePktLossThresh | read-write | mandatory | Alarm threshold (in percent) for excessive packet loss. |
| 1.3.6.1.4.1.2281.10.8.4.4.1.14 | ColumngenEquipServicesPWProfilesAlarmThresh | read-write | mandatory | Delay (in msecs) for persistent alarm setting. |
| 1.3.6.1.4.1.2281.10.8.4.4.1.15 | ColumngenEquipServicesPWProfilesClearAlarmThresh | read-write | mandatory | Delay (in msecs) for persistent alarm clearing. |
| 1.3.6.1.4.1.2281.10.8.4.4.1.16 | ColumngenEquipServicesPWProfilesMissingPktsToSes | read-write | mandatory | Percent of missing packets detected in 1 second window to cause SES to be counted. |
| 1.3.6.1.4.1.2281.10.8.4.4.1.17 | ColumngenEquipServicesPWProfilesDs0Filler | read-write | mandatory | Byte pattern transmitted on ds0 channels when packets over/underflow the jitter buffer. |
| 1.3.6.1.4.1.2281.10.8.4.4.1.18 | ColumngenEquipServicesPWProfilesCasAlarmPattern | read-write | mandatory | CAS alarm pattern transmitted on E1 interface when packets over/underflow the jitter buffer. |
| 1.3.6.1.4.1.2281.10.8.4.4.1.30 | ColumngenEquipServicesPWProfilesRowStatus | read-write | mandatory | This value is the status of the entry. |
| 1.3.6.1.4.1.2281.10.8.4.5 | TablegenEquipServicesPWServiceTable | not-accessible | mandatory | This table allows configuration of pseudowire services, by assigning TDM ports or bundles, PSN tunnels, and profiles to a service. |
| 1.3.6.1.4.1.2281.10.8.4.5.1 | RowgenEquipServicesPWServiceEntry | not-accessible | mandatory | This table allows configuration of pseudowire services, by assigning TDM ports or bundles, PSN tunnels, and profiles to a service. |
| 1.3.6.1.4.1.2281.10.8.4.5.1.1 | ColumngenEquipServicesPWServicePWId | read-write | mandatory | Pseudo Wire ID. |
| 1.3.6.1.4.1.2281.10.8.4.5.1.2 | ColumngenEquipServicesPWServicePWType | read-write | mandatory | PW type. E1-satop denotes SAToP. Cespsn Denotes CESoP without CAS signalling, and cas-cespsn denotes CESoP with CAS signalling. |
| 1.3.6.1.4.1.2281.10.8.4.5.1.3 | ColumngenEquipServicesPWServicePsnType | read-write | mandatory | PSN tunnel type. UDPIP denotes UDP/IP, while eth denotes MEF8 encapsulation. |
| 1.3.6.1.4.1.2281.10.8.4.5.1.4 | ColumngenEquipServicesPWServiceTdmPort | read-write | mandatory | Number of TDM port (for SATOP). This parameter must be zero for CESoP. |
| 1.3.6.1.4.1.2281.10.8.4.5.1.5 | ColumngenEquipServicesPWServiceDs0bundle | read-write | mandatory | Number DS0 bundle (for CESoPSN). This parameter must be zero for SAToP. |
| 1.3.6.1.4.1.2281.10.8.4.5.1.6 | ColumngenEquipServicesPWServiceTdmProfileId | read-write | mandatory | TDM configuration profile ID. |
| 1.3.6.1.4.1.2281.10.8.4.5.1.7 | ColumngenEquipServicesPWServicePsnTunnelProtection | read-write | mandatory | PSN tunnel protection mode. |
| 1.3.6.1.4.1.2281.10.8.4.5.1.8 | ColumngenEquipServicesPWServicePsnTunnelOrGroupId | read-write | mandatory | PSN tunnel ID for unprotected or PSN tunnel group ID for protected PSN channel. |
| 1.3.6.1.4.1.2281.10.8.4.5.1.9 | ColumngenEquipServicesPWServiceSrcUdpPortOrEcid | read-write | mandatory | Source UDP Port for UDP IP tunnel or ECID for Ethernet tunnel. |
| 1.3.6.1.4.1.2281.10.8.4.5.1.10 | ColumngenEquipServicesPWServiceDstUdpPortOrEcid | read-write | mandatory | Destination UDP Port for UDP IP tunnel or ECID for Ethernet tunnel. |
| 1.3.6.1.4.1.2281.10.8.4.5.1.11 | ColumngenEquipServicesPWServiceAdmin | read-write | mandatory | Admin status. |
| 1.3.6.1.4.1.2281.10.8.4.5.1.12 | ColumngenEquipServicesPWServiceCrReference | read-write | mandatory | Clock recovery reference. |
| 1.3.6.1.4.1.2281.10.8.4.5.1.13 | ColumngenEquipServicesPWServiceOperStatus | read-only | mandatory | Operational status. |
| 1.3.6.1.4.1.2281.10.8.4.5.1.30 | ColumngenEquipServicesPWServiceRowStatus | read-write | mandatory | This value is the status of the entry. |
| 1.3.6.1.4.1.2281.10.8.4.6 | NodegenEquipServicesNGPW | |||
| 1.3.6.1.4.1.2281.10.8.4.6.1 | TablegenEquipServicesNGPWBundlesTable | not-accessible | mandatory | This table allows definition of the group of timeslots comprising a bundle. |
| 1.3.6.1.4.1.2281.10.8.4.6.1.1 | RowgenEquipServicesNGPWBundlesEntry | not-accessible | mandatory | This table entry allows definition of the group of timeslots comprising a bundle. |
| 1.3.6.1.4.1.2281.10.8.4.6.1.1.1 | ColumngenEquipServicesNGPWBundlesSlotId | read-only | mandatory | Slot where PW-LIC is inserted. |
| 1.3.6.1.4.1.2281.10.8.4.6.1.1.2 | ColumngenEquipServicesNGPWBundlesTdmPort | read-only | mandatory | TDM Port number. |
| 1.3.6.1.4.1.2281.10.8.4.6.1.1.3 | ColumngenEquipServicesNGPWBundlesDs0List | read-only | mandatory | Timeslot number to be included in a bundle. |
| 1.3.6.1.4.1.2281.10.8.4.6.1.1.4 | ColumngenEquipServicesNGPWBundlesIfIndex | read-write | mandatory | iIndex. |
| 1.3.6.1.4.1.2281.10.8.4.6.1.1.5 | ColumngenEquipServicesNGPWBundlesBundleId | read-write | mandatory | Bundle ID. |
| 1.3.6.1.4.1.2281.10.8.4.6.1.1.30 | ColumngenEquipServicesNGPWBundlesRowStatus | read-write | mandatory | Row status to allow user add entries dynamically. |
| 1.3.6.1.4.1.2281.10.8.4.6.2 | TablegenEquipServicesNGPWBundlesDescriptionTable | not-accessible | mandatory | This table allows configuring admin state and description for bundles. |
| 1.3.6.1.4.1.2281.10.8.4.6.2.1 | RowgenEquipServicesNGPWBundlesDescriptionEntry | not-accessible | mandatory | This table entry allows configuring admin state and description for bundles. |
| 1.3.6.1.4.1.2281.10.8.4.6.2.1.1 | ColumngenEquipServicesNGPWBundlesDescriptionSlotId | read-only | mandatory | Slot where PW-LIC is inserted. |
| 1.3.6.1.4.1.2281.10.8.4.6.2.1.2 | ColumngenEquipServicesNGPWBundlesDescriptionBundleId | read-only | mandatory | Bundle ID. |
| 1.3.6.1.4.1.2281.10.8.4.6.2.1.3 | ColumngenEquipServicesNGPWBundlesDescriptionAdmin | read-write | mandatory | Bundle administrative state. |
| 1.3.6.1.4.1.2281.10.8.4.6.2.1.4 | ColumngenEquipServicesNGPWBundlesDescriptionBundleDesc | read-write | mandatory | Bundle description. |
| 1.3.6.1.4.1.2281.10.8.4.6.2.1.30 | ColumngenEquipServicesNGPWBundlesDescriptionRowStatus | read-write | mandatory | Row status to allow user add entries dynamically. |
| 1.3.6.1.4.1.2281.10.8.4.6.3 | TablegenEquipServicesNGPWProfilesTable | not-accessible | mandatory | This table allows configuration of PW service profiles. |
| 1.3.6.1.4.1.2281.10.8.4.6.3.1 | RowgenEquipServicesNGPWProfilesEntry | not-accessible | mandatory | This table entry allows configuration of PW service profiles. |
| 1.3.6.1.4.1.2281.10.8.4.6.3.1.1 | ColumngenEquipServicesNGPWProfilesPWProfileId | read-only | mandatory | Unique PW profile ID. |
| 1.3.6.1.4.1.2281.10.8.4.6.3.1.2 | ColumngenEquipServicesNGPWProfilesPayloadSize | read-write | mandatory | Payload size, in terms of TDM frames in each packet. |
| 1.3.6.1.4.1.2281.10.8.4.6.3.1.3 | ColumngenEquipServicesNGPWProfilesJitterBufferDepth | read-write | mandatory | Jitter buffer depth (in milliseconds) to allow accommodation to the PSN-specific packet delay variation. |
| 1.3.6.1.4.1.2281.10.8.4.6.3.1.4 | ColumngenEquipServicesNGPWProfilesPayloadSuppression | read-write | mandatory | When enabled, payload is suppresed upon incoming TDM failure. |
| 1.3.6.1.4.1.2281.10.8.4.6.3.1.5 | ColumngenEquipServicesNGPWProfilesPayloadType | read-write | mandatory | Payload type byte. |
| 1.3.6.1.4.1.2281.10.8.4.6.3.1.6 | ColumngenEquipServicesNGPWProfilesDs0Filler | read-write | mandatory | Byte pattern transmitted on ds0 channels when packets over/underflow the jitter buffer. |
| 1.3.6.1.4.1.2281.10.8.4.6.3.1.7 | ColumngenEquipServicesNGPWProfilesCasAlarmPattern | read-write | mandatory | CAS alarm pattern transmitted on E1 interface when packets over/underflow the jitter buffer. |
| 1.3.6.1.4.1.2281.10.8.4.6.3.1.8 | ColumngenEquipServicesNGPWProfilesRtpHeaderUsed | read-write | mandatory | If set to False: an RTP header is not pre-pended to the TDM packet. |
| 1.3.6.1.4.1.2281.10.8.4.6.3.1.9 | ColumngenEquipServicesNGPWProfilesRtpTimestampMode | read-write | mandatory | RTP timestamp mode. |
| 1.3.6.1.4.1.2281.10.8.4.6.3.1.10 | ColumngenEquipServicesNGPWProfilesRtpTimestampAbsFactor | read-write | mandatory | Multiplication factor for 8KHz units in absolute mode of RTP timestamping. |
| 1.3.6.1.4.1.2281.10.8.4.6.3.1.11 | ColumngenEquipServicesNGPWProfilesLopsDetection | read-write | mandatory | Timeout for TDM ports loopback. |
| 1.3.6.1.4.1.2281.10.8.4.6.3.1.12 | ColumngenEquipServicesNGPWProfilesConseqPacketsInSync | read-write | mandatory | Number of consecutive packets with sequential sequence numbers required to exit LOPS. |
| 1.3.6.1.4.1.2281.10.8.4.6.3.1.13 | ColumngenEquipServicesNGPWProfilesConseqMissPktsOutSync | read-write | mandatory | Number of consecutive missing packets required to enter LOPS. |
| 1.3.6.1.4.1.2281.10.8.4.6.3.1.14 | ColumngenEquipServicesNGPWProfilesPktLossTimeWindow | read-write | mandatory | Time for computing average packet loss rate to detect excessive packet loss. |
| 1.3.6.1.4.1.2281.10.8.4.6.3.1.15 | ColumngenEquipServicesNGPWProfilesExcessivePktLossThresh | read-write | mandatory | Alarm threshold (in percent) for excessive packet loss. |
| 1.3.6.1.4.1.2281.10.8.4.6.3.1.16 | ColumngenEquipServicesNGPWProfilesAlarmThresh | read-write | mandatory | Delay (in msecs) for persistent alarm setting. |
| 1.3.6.1.4.1.2281.10.8.4.6.3.1.17 | ColumngenEquipServicesNGPWProfilesClearAlarmThresh | read-write | mandatory | Delay (in msecs) for persistent alarm clearing. |
| 1.3.6.1.4.1.2281.10.8.4.6.3.1.18 | ColumngenEquipServicesNGPWProfilesMissingPktsToSes | read-write | mandatory | TPercent of missing packets detected in 1 second window to cause SES to be counted. |
| 1.3.6.1.4.1.2281.10.8.4.6.3.1.30 | ColumngenEquipServicesNGPWProfilesRowStatus | read-write | mandatory | Row status to allow user add entries dynamically. |
| 1.3.6.1.4.1.2281.10.8.4.6.4 | TablegenEquipServicesNGPWPSNTunnelsTable | not-accessible | mandatory | This table allows configuration of PSN tunnel encapsulations for PW services. |
| 1.3.6.1.4.1.2281.10.8.4.6.4.1 | RowgenEquipServicesNGPWPSNTunnelsEntry | not-accessible | mandatory | This table entry allows configuration of PSN tunnel encapsulations for PW services. |
| 1.3.6.1.4.1.2281.10.8.4.6.4.1.1 | ColumngenEquipServicesNGPWPSNTunnelsSlotID | read-only | mandatory | Slot where PW-LIC is inserted. |
| 1.3.6.1.4.1.2281.10.8.4.6.4.1.2 | ColumngenEquipServicesNGPWPSNTunnelsTunnelId | read-only | mandatory | PSN Tunnel ID. |
| 1.3.6.1.4.1.2281.10.8.4.6.4.1.3 | ColumngenEquipServicesNGPWPSNTunnelsAdmin | read-write | mandatory | Payload type byte. |
| 1.3.6.1.4.1.2281.10.8.4.6.4.1.4 | ColumngenEquipServicesNGPWPSNTunnelsPsnType | read-write | mandatory | PSN tunnel type. UDPIP denotes UDP/IP, while eth denotes MEF8 encapsulation. |
| 1.3.6.1.4.1.2281.10.8.4.6.4.1.5 | ColumngenEquipServicesNGPWPSNTunnelsDestIpAddr | read-write | mandatory | Destination IP. |
| 1.3.6.1.4.1.2281.10.8.4.6.4.1.6 | ColumngenEquipServicesNGPWPSNTunnelsNextHopIp | read-write | mandatory | Next hop IP Address for UDP/IP PSN tunnel. |
| 1.3.6.1.4.1.2281.10.8.4.6.4.1.7 | ColumngenEquipServicesNGPWPSNTunnelsTosDscp | read-write | mandatory | PSN Tunnel ToS (DSCP). |
| 1.3.6.1.4.1.2281.10.8.4.6.4.1.8 | ColumngenEquipServicesNGPWPSNTunnelsRemoteMacAddr | read-write | mandatory | Remote MAC address. |
| 1.3.6.1.4.1.2281.10.8.4.6.4.1.9 | ColumngenEquipServicesNGPWPSNTunnelsSourceMPLSLabel | read-write | mandatory | Source MPLS Label. |
| 1.3.6.1.4.1.2281.10.8.4.6.4.1.10 | ColumngenEquipServicesNGPWPSNTunnelsDestinationMPLSLabel | read-write | mandatory | Destination MPLS label. |
| 1.3.6.1.4.1.2281.10.8.4.6.4.1.11 | ColumngenEquipServicesNGPWPSNTunnelsMPLSexp | read-write | mandatory | MPLS Experimental field. |
| 1.3.6.1.4.1.2281.10.8.4.6.4.1.12 | ColumngenEquipServicesNGPWPSNTunnelsVlanType | read-write | mandatory | VLAN type supported by this PSN tunnel (S-VLAN or C-VLAN). |
| 1.3.6.1.4.1.2281.10.8.4.6.4.1.13 | ColumngenEquipServicesNGPWPSNTunnelsVid | read-write | mandatory | PSN Tunnel VLAN ID. |
| 1.3.6.1.4.1.2281.10.8.4.6.4.1.14 | ColumngenEquipServicesNGPWPSNTunnelsPBits | read-write | mandatory | PSN Tunnel P-bits. |
| 1.3.6.1.4.1.2281.10.8.4.6.4.1.15 | ColumngenEquipServicesNGPWPSNTunnelsMaId | read-write | mandatory | Maintenance Association ID. |
| 1.3.6.1.4.1.2281.10.8.4.6.4.1.16 | ColumngenEquipServicesNGPWPSNTunnelsTDMDefectPropagation | read-write | mandatory | TDM defect propagation to SOAM. Enable for dual homing configuration. |
| 1.3.6.1.4.1.2281.10.8.4.6.4.1.30 | ColumngenEquipServicesNGPWPSNTunnelsRowStatus | read-write | mandatory | Row status to allow user add entries dynamically. |
| 1.3.6.1.4.1.2281.10.8.4.6.5 | TablegenEquipServicesNGPWServiceTable | not-accessible | mandatory | This table allows definition of PW services. |
| 1.3.6.1.4.1.2281.10.8.4.6.5.1 | RowgenEquipServicesNGPWServiceEntry | not-accessible | mandatory | This table entry allows definition of PW services. |
| 1.3.6.1.4.1.2281.10.8.4.6.5.1.1 | ColumngenEquipServicesNGPWServiceSlotID | read-only | mandatory | Slot where PW-LIC is inserted. |
| 1.3.6.1.4.1.2281.10.8.4.6.5.1.2 | ColumngenEquipServicesNGPWServicePWId | read-only | mandatory | Pseudowire ID. |
| 1.3.6.1.4.1.2281.10.8.4.6.5.1.3 | ColumngenEquipServicesNGPWServiceAdmin | read-write | mandatory | Administrative status of this PW service. |
| 1.3.6.1.4.1.2281.10.8.4.6.5.1.4 | ColumngenEquipServicesNGPWServicePWType | read-write | mandatory | Indicates the emulated service to be carried over the PW service (SAToP, CESoP, CESoP with PSN). |
| 1.3.6.1.4.1.2281.10.8.4.6.5.1.5 | ColumngenEquipServicesNGPWServicePsnType | read-write | mandatory | Indicates the PSN type that the PW service will use over the network. |
| 1.3.6.1.4.1.2281.10.8.4.6.5.1.6 | ColumngenEquipServicesNGPWServiceDs0bundle | read-write | mandatory | Number DS0 bundle (for CESoPSN). This parameter must be zero for SAToP. |
| 1.3.6.1.4.1.2281.10.8.4.6.5.1.7 | ColumngenEquipServicesNGPWServiceTdmProfileId | read-write | mandatory | Indicates the PW profile id for this PW service. |
| 1.3.6.1.4.1.2281.10.8.4.6.5.1.8 | ColumngenEquipServicesNGPWServiceTunnel | read-write | mandatory | PSN tunnel ID for unprotected or PSN tunnel group ID for protected PSN channel. |
| 1.3.6.1.4.1.2281.10.8.4.6.5.1.9 | ColumngenEquipServicesNGPWServiceCrReference | read-write | mandatory | Whether this PW may be used as a reference for clock recovery. |
| 1.3.6.1.4.1.2281.10.8.4.6.5.1.10 | ColumngenEquipServicesNGPWServiceSrcPsnId | read-write | mandatory | Source UDP Port for UDP IP tunnel, ECID for Ethernet tunnel or label for MPLS tunnel. |
| 1.3.6.1.4.1.2281.10.8.4.6.5.1.11 | ColumngenEquipServicesNGPWServiceDstPsnId | read-write | mandatory | Destination UDP Port for UDP IP tunnel, ECID for Ethernet tunnel or label for MPLS tunnel. |
| 1.3.6.1.4.1.2281.10.8.4.6.5.1.12 | ColumngenEquipServicesNGPWServicePsnTunnelProtection | read-write | mandatory | Indicates whether this PW service is PSN protected. |
| 1.3.6.1.4.1.2281.10.8.4.6.5.1.30 | ColumngenEquipServicesNGPWServiceRowStatus | read-write | mandatory | Row status to allow user add entries dynamically. |
| 1.3.6.1.4.1.2281.10.8.4.6.6 | TablegenEquipServicesNGPWTDMPortsTable | not-accessible | mandatory | This table allows configuration of TDM ports. |
| 1.3.6.1.4.1.2281.10.8.4.6.6.1 | RowgenEquipServicesNGPWTDMPortsEntry | not-accessible | mandatory | This table entry allows configuration of TDM ports. |
| 1.3.6.1.4.1.2281.10.8.4.6.6.1.1 | ColumngenEquipServicesNGPWTDMPortsSlotID | read-only | mandatory | Slot where PW-LIC is inserted. |
| 1.3.6.1.4.1.2281.10.8.4.6.6.1.2 | ColumngenEquipServicesNGPWTDMPortsPort | read-only | mandatory | Physical port number in the card. |
| 1.3.6.1.4.1.2281.10.8.4.6.6.1.3 | ColumngenEquipServicesNGPWTDMPortsIfIndex | read-write | mandatory | ifIndex. |
| 1.3.6.1.4.1.2281.10.8.4.6.6.1.4 | ColumngenEquipServicesNGPWTDMPortsAdmin | read-write | mandatory | TDM port administrative state. |
| 1.3.6.1.4.1.2281.10.8.4.6.6.1.5 | ColumngenEquipServicesNGPWTDMPortsLineType | read-write | mandatory | Line type of this TDM port. |
| 1.3.6.1.4.1.2281.10.8.4.6.6.1.6 | ColumngenEquipServicesNGPWTDMPortsLineCoding | read-write | mandatory | Line coding for this port. The value hdb3-b8zs means b8zs for T1 and hdb3 for E1. AMI is only for T1. |
| 1.3.6.1.4.1.2281.10.8.4.6.6.1.7 | ColumngenEquipServicesNGPWTDMPortsChannelization | read-write | mandatory | Indication whether this TDM port is channelized into DS0s. |
| 1.3.6.1.4.1.2281.10.8.4.6.6.1.8 | ColumngenEquipServicesNGPWTDMPortsTimingMode | read-write | mandatory | Clock reference for the outgoing TDM signal. |
| 1.3.6.1.4.1.2281.10.8.4.6.6.1.9 | ColumngenEquipServicesNGPWTDMPortsClockSourceRef | read-write | mandatory | Clock source reference for Absolute clock mode. ???none??? - for loop or clock-recovery timing modes. |
| 1.3.6.1.4.1.2281.10.8.4.6.6.1.10 | ColumngenEquipServicesNGPWTDMPortsClkSrcRefPort | read-write | mandatory | TDM port serving as a clock reference for loop or clock-recovery timing modes. |
| 1.3.6.1.4.1.2281.10.8.4.6.6.1.11 | ColumngenEquipServicesNGPWTDMPortsIdleCode | read-write | mandatory | Value to be transmitted on this TDM port in unused timeslots. |
| 1.3.6.1.4.1.2281.10.8.4.6.6.1.12 | ColumngenEquipServicesNGPWTDMPortsCableLength | read-write | mandatory | Cable length for this port. The value fixed-or-0-133ft means fixed for E1 (the only valid value) and 0-133ft for T1. |
| 1.3.6.1.4.1.2281.10.8.4.6.6.1.13 | ColumngenEquipServicesNGPWTDMPortsLoopback | read-write | mandatory | Type of required loopback on this TDM port. |
| 1.3.6.1.4.1.2281.10.8.4.6.7 | TablegenEquipServicesNGPWPSNTunnelsStatusTable | not-accessible | mandatory | This table contains status and information about existing PSN tunnels. |
| 1.3.6.1.4.1.2281.10.8.4.6.7.1 | RowgenEquipServicesNGPWPSNTunnelsStatusEntry | not-accessible | mandatory | This table entry contains status and information about existing PSN tunnels. |
| 1.3.6.1.4.1.2281.10.8.4.6.7.1.1 | ColumngenEquipServicesNGPWPSNTunnelsStatusSlotID | read-only | mandatory | Slot where PW-LIC is inserted. |
| 1.3.6.1.4.1.2281.10.8.4.6.7.1.2 | ColumngenEquipServicesNGPWPSNTunnelsStatusTunnelId | read-only | mandatory | PSN Tunnel ID. |
| 1.3.6.1.4.1.2281.10.8.4.6.7.1.3 | ColumngenEquipServicesNGPWPSNTunnelsStatusOperStatus | read-only | mandatory | PSN tunnel operational state. |
| 1.3.6.1.4.1.2281.10.8.4.6.7.1.4 | ColumngenEquipServicesNGPWPSNTunnelsStatusSourceIpAddr | read-only | mandatory | PSN tunnel source IP address. |
| 1.3.6.1.4.1.2281.10.8.4.6.7.1.5 | ColumngenEquipServicesNGPWPSNTunnelsStatusSourceMacAddr | read-only | mandatory | PSN tunnel source MAC address. |
| 1.3.6.1.4.1.2281.10.8.4.6.7.1.6 | ColumngenEquipServicesNGPWPSNTunnelsStatusRemoteMacAddr | read-only | mandatory | PSN tunnel remote MAC address. |
| 1.3.6.1.4.1.2281.10.8.4.6.8 | TablegenEquipServicesNGPWServiceStatusTable | not-accessible | mandatory | This table contains status information of existing PW services. |
| 1.3.6.1.4.1.2281.10.8.4.6.8.1 | RowgenEquipServicesNGPWServiceStatusEntry | not-accessible | mandatory | This table entry contains status information of existing PW services. |
| 1.3.6.1.4.1.2281.10.8.4.6.8.1.1 | ColumngenEquipServicesNGPWServiceStatusSlotID | read-only | mandatory | Slot where PW-LIC is inserted. |
| 1.3.6.1.4.1.2281.10.8.4.6.8.1.2 | ColumngenEquipServicesNGPWServiceStatusID | read-only | mandatory | Pseudowire ID. |
| 1.3.6.1.4.1.2281.10.8.4.6.8.1.3 | ColumngenEquipServicesNGPWServiceStatusOperStatus | read-only | mandatory | Indicates the operational status of PW service. |
| 1.3.6.1.4.1.2281.10.8.4.6.8.1.4 | ColumngenEquipServicesNGPWServiceStatusClearStats | read-write | mandatory | Clear all statistics for this PW service. |
| 1.3.6.1.4.1.2281.10.8.4.6.8.1.5 | ColumngenEquipServicesNGPWServiceStatusTxPkts | read-only | mandatory | Number of transmitted packets. |
| 1.3.6.1.4.1.2281.10.8.4.6.8.1.6 | ColumngenEquipServicesNGPWServiceStatusReceivedPkts | read-only | mandatory | Number of received packets. |
| 1.3.6.1.4.1.2281.10.8.4.6.8.1.7 | ColumngenEquipServicesNGPWServiceStatusTransitionsLOPS | read-only | mandatory | Number of transitions from the normal state to the LOPS. |
| 1.3.6.1.4.1.2281.10.8.4.6.8.1.8 | ColumngenEquipServicesNGPWServiceStatusJitterBufferOverruns | read-only | mandatory | Number of jitter buffer overruns. |
| 1.3.6.1.4.1.2281.10.8.4.6.8.1.9 | ColumngenEquipServicesNGPWServiceStatusBufferDeviations | read-only | mandatory | Max Jitter Buffer Deviation. |
| 1.3.6.1.4.1.2281.10.8.4.6.8.1.10 | ColumngenEquipServicesNGPWServiceStatusMinJitterCount | read-only | mandatory | Minimum jitter buffer usage registered for the last second. |
| 1.3.6.1.4.1.2281.10.8.4.6.8.1.11 | ColumngenEquipServicesNGPWServiceStatusMaxJitterCount | read-only | mandatory | Maximum jitter buffer usage registered for the last second. |
| 1.3.6.1.4.1.2281.10.8.4.6.9 | TablegenEquipServicesNGPWTDMPortsStatusTable | not-accessible | mandatory | This table contains status information about TDM ports. |
| 1.3.6.1.4.1.2281.10.8.4.6.9.1 | RowgenEquipServicesNGPWTDMPortsStatusEntry | not-accessible | mandatory | This table entry contains status information about TDM ports. |
| 1.3.6.1.4.1.2281.10.8.4.6.9.1.1 | ColumngenEquipServicesNGPWTDMPortsStatusSlotID | read-only | mandatory | Slot where PW-LIC is inserted. |
| 1.3.6.1.4.1.2281.10.8.4.6.9.1.2 | ColumngenEquipServicesNGPWTDMPortsStatusPort | read-only | mandatory | Physical port number in the card. |
| 1.3.6.1.4.1.2281.10.8.4.6.9.1.3 | ColumngenEquipServicesNGPWTDMPortsStatusIfIndex | read-only | mandatory | ifIndex. |
| 1.3.6.1.4.1.2281.10.8.4.6.9.1.4 | ColumngenEquipServicesNGPWTDMPortsStatusOperStatus | read-write | mandatory | Operational state of the port. |
| 1.3.6.1.4.1.2281.10.8.4.6.9.1.5 | ColumngenEquipServicesNGPWTDMPortsStatusLoopbackCounter | read-only | mandatory | Loopback time left (in seconds) |
| 1.3.6.1.4.1.2281.10.8.4.6.9.1.6 | ColumngenEquipServicesNGPWTDMPortsStatusActualLoopback | read-only | mandatory | Actual status of loopback on this TDM port reported by the card. |
| 1.3.6.1.4.1.2281.10.8.4.6.9.1.7 | ColumngenEquipServicesNGPWTDMPortsStatusLineStatus | read-only | mandatory | Currently present line-level PDH alarms. |
| 1.3.6.1.4.1.2281.10.8.4.6.9.1.8 | ColumngenEquipServicesNGPWTDMPortsStatusLoopback | read-write | mandatory | Type of required loopback on this TDM port. |
| 1.3.6.1.4.1.2281.10.8.4.6.10 | TablegenEquipServicesNGPWBundlesStatusTable | not-accessible | mandatory | This table contains the current staus for bundles. |
| 1.3.6.1.4.1.2281.10.8.4.6.10.1 | RowgenEquipServicesNGPWBundlesStatusEntry | not-accessible | mandatory | This table contains the current staus for bundles. |
| 1.3.6.1.4.1.2281.10.8.4.6.10.1.1 | ColumngenEquipServicesNGPWBundlesStatusSlotID | read-only | mandatory | Slot where PW-LIC is inserted. |
| 1.3.6.1.4.1.2281.10.8.4.6.10.1.2 | ColumngenEquipServicesNGPWBundlesStatusBundleId | read-only | mandatory | Bundle ID. |
| 1.3.6.1.4.1.2281.10.8.4.6.10.1.3 | ColumngenEquipServicesNGPWBundlesStatusOperStatus | read-only | mandatory | Bundle operational state. |
| 1.3.6.1.4.1.2281.10.8.4.6.11 | TablegenEquipServicesNGPWPSNTunnelGroupTable | not-accessible | mandatory | This table allows configuration of groups of tunnels for PW path protection. |
| 1.3.6.1.4.1.2281.10.8.4.6.11.1 | RowgenEquipServicesNGPWPSNTunnelGroupEntry | not-accessible | mandatory | This table entry allows configuration of groups of tunnels for PW path protection. |
| 1.3.6.1.4.1.2281.10.8.4.6.11.1.1 | ColumngenEquipServicesNGPWPSNTunnelGroupSlot | read-write | mandatory | Slot where PW-LIC is inserted. |
| 1.3.6.1.4.1.2281.10.8.4.6.11.1.2 | ColumngenEquipServicesNGPWPSNTunnelGroupId | read-write | mandatory | Indicates the corresponding PSN Tunnel Protection Group. |
| 1.3.6.1.4.1.2281.10.8.4.6.11.1.3 | ColumngenEquipServicesNGPWPSNTunnelGroupPrimaryId | read-write | mandatory | Tunnel ID for the primary path. |
| 1.3.6.1.4.1.2281.10.8.4.6.11.1.4 | ColumngenEquipServicesNGPWPSNTunnelGroupSecondaryId | read-write | mandatory | Tunnel ID for the secondary path. |
| 1.3.6.1.4.1.2281.10.8.4.6.11.1.5 | ColumngenEquipServicesNGPWPSNTunnelGroupAdmin | read-write | mandatory | Admin. |
| 1.3.6.1.4.1.2281.10.8.4.6.11.1.6 | ColumngenEquipServicesNGPWPSNTunnelGroupRevertive | read-write | mandatory | Enable for revertive protection. Default is disabled. |
| 1.3.6.1.4.1.2281.10.8.4.6.11.1.7 | ColumngenEquipServicesNGPWPSNTunnelGroupProtectionMode | read-write | mandatory | Protection mode 1+1. |
| 1.3.6.1.4.1.2281.10.8.4.6.11.1.30 | ColumngenEquipServicesNGPWPSNTunnelGroupRowStatus | read-write | mandatory | This value is the status of the entry. |
| 1.3.6.1.4.1.2281.10.8.4.6.12 | TablegenEquipServicesNGPWPSNTunnelGroupStatusTable | not-accessible | mandatory | This table contains status of path protection tunnels. |
| 1.3.6.1.4.1.2281.10.8.4.6.12.1 | RowgenEquipServicesNGPWPSNTunnelGroupStatusEntry | not-accessible | mandatory | This table entry contains status of path protection tunnels. |
| 1.3.6.1.4.1.2281.10.8.4.6.12.1.1 | ColumngenEquipServicesNGPWPSNTunnelGroupStatusSlot | read-only | mandatory | Slot where PW-LIC is inserted. |
| 1.3.6.1.4.1.2281.10.8.4.6.12.1.2 | ColumngenEquipServicesNGPWPSNTunnelGroupStatusId | read-only | mandatory | Tunnel group ID. |
| 1.3.6.1.4.1.2281.10.8.4.6.12.1.3 | ColumngenEquipServicesNGPWPSNTunnelGroupStatusOperStatus | read-only | mandatory | Tunnel group operational state. |
| 1.3.6.1.4.1.2281.10.8.4.6.12.1.4 | ColumngenEquipServicesNGPWPSNTunnelGroupStatusProtectionCommand | read-write | mandatory | User command to perform a path protection switch. |
| 1.3.6.1.4.1.2281.10.8.4.6.12.1.5 | ColumngenEquipServicesNGPWPSNTunnelGroupStatusProtectionSwitches | read-only | mandatory | A counter of PSN tunnel protection switches. |
| 1.3.6.1.4.1.2281.10.8.4.6.12.1.6 | ColumngenEquipServicesNGPWPSNTunnelGroupStatusActiveTunnel | read-only | mandatory | Current active PSN tunnel. |
| 1.3.6.1.4.1.2281.10.8.4.6.12.1.7 | ColumngenEquipServicesNGPWPSNTunnelGroupStatusClearStats | read-write | mandatory | User command to clear number of switches counter. |
| 1.3.6.1.4.1.2281.10.8.4.6.12.1.8 | ColumngenEquipServicesNGPWPSNTunnelGroupStatusRevertiveCountdown | read-only | mandatory | Time left until revertive switch is performed. |
| 1.3.6.1.4.1.2281.10.8.4.6.13 | TablegenEquipServicesNGPWSOAMMDTable | not-accessible | mandatory | This table allows configuration of MD parameters at the PW card. |
| 1.3.6.1.4.1.2281.10.8.4.6.13.1 | RowgenEquipServicesNGPWSOAMMDEntry | not-accessible | mandatory | This table entry allows configuration of MD parameters at the PW card. |
| 1.3.6.1.4.1.2281.10.8.4.6.13.1.1 | ColumngenEquipServicesNGPWSOAMMDSlot | read-only | mandatory | Slot where PW-LIC is inserted. |
| 1.3.6.1.4.1.2281.10.8.4.6.13.1.2 | ColumngenEquipServicesNGPWSOAMMDId | read-only | mandatory | Maintenance Domain ID. |
| 1.3.6.1.4.1.2281.10.8.4.6.13.1.3 | ColumngenEquipServicesNGPWSOAMMDName | read-write | mandatory | Maintenance Domain Name. |
| 1.3.6.1.4.1.2281.10.8.4.6.13.1.4 | ColumngenEquipServicesNGPWSOAMMDLevel | read-write | mandatory | Maintenance Domain level. |
| 1.3.6.1.4.1.2281.10.8.4.6.13.1.30 | ColumngenEquipServicesNGPWSOAMMDRowStatus | read-write | mandatory | Row status to allow user add entries dynamically. |
| 1.3.6.1.4.1.2281.10.8.4.6.14 | TablegenEquipServicesNGPWSOAMMATable | not-accessible | mandatory | This table allows configuration of MA parameters at the PW card. |
| 1.3.6.1.4.1.2281.10.8.4.6.14.1 | RowgenEquipServicesNGPWSOAMMAEntry | not-accessible | mandatory | This table entry allows configuration of MA parameters at the PW card. |
| 1.3.6.1.4.1.2281.10.8.4.6.14.1.1 | ColumngenEquipServicesNGPWSOAMMASlot | read-only | mandatory | Slot ID. |
| 1.3.6.1.4.1.2281.10.8.4.6.14.1.2 | ColumngenEquipServicesNGPWSOAMMAId | read-only | mandatory | Maintenance association ID. |
| 1.3.6.1.4.1.2281.10.8.4.6.14.1.3 | ColumngenEquipServicesNGPWSOAMMAName | read-write | mandatory | Maintenance Association name. |
| 1.3.6.1.4.1.2281.10.8.4.6.14.1.4 | ColumngenEquipServicesNGPWSOAMMAMdId | read-write | mandatory | Maintenance Domain ID. |
| 1.3.6.1.4.1.2281.10.8.4.6.14.1.5 | ColumngenEquipServicesNGPWSOAMMALocalMepId | read-write | mandatory | Local MEP ID. |
| 1.3.6.1.4.1.2281.10.8.4.6.14.1.6 | ColumngenEquipServicesNGPWSOAMMARemoteMepId | read-write | mandatory | Remote MEP ID. |
| 1.3.6.1.4.1.2281.10.8.4.6.14.1.7 | ColumngenEquipServicesNGPWSOAMMAVid | read-write | mandatory | VLAN ID of the Maintenance Association. |
| 1.3.6.1.4.1.2281.10.8.4.6.14.1.8 | ColumngenEquipServicesNGPWSOAMMAVlanType | read-write | mandatory | VLAN type of the Maintenance Association. |
| 1.3.6.1.4.1.2281.10.8.4.6.14.1.9 | ColumngenEquipServicesNGPWSOAMMACCMAdmin | read-write | mandatory | Maintenance Association CCM administrative status. |
| 1.3.6.1.4.1.2281.10.8.4.6.14.1.10 | ColumngenEquipServicesNGPWSOAMMACCMInterval | read-write | mandatory | Maintenance Association CCM Interval. |
| 1.3.6.1.4.1.2281.10.8.4.6.14.1.11 | ColumngenEquipServicesNGPWSOAMMACCMLTMPriority | read-write | mandatory | Maintenance Association link trace message priority. |
| 1.3.6.1.4.1.2281.10.8.4.6.14.1.30 | ColumngenEquipServicesNGPWSOAMMARowStatus | read-write | mandatory | Row status to allow user add entries dynamically. |
| 1.3.6.1.4.1.2281.10.8.4.6.15 | TablegenEquipServicesNGPWSOAMMAStatusTable | not-accessible | mandatory | This table shows the SOAM status of each MA at the PW card level. |
| 1.3.6.1.4.1.2281.10.8.4.6.15.1 | RowgenEquipServicesNGPWSOAMMAStatusEntry | not-accessible | mandatory | This table entry shows the SOAM status of each MA at the PW card level. |
| 1.3.6.1.4.1.2281.10.8.4.6.15.1.1 | ColumngenEquipServicesNGPWSOAMMAStatusSlot | read-only | mandatory | Slot ID. |
| 1.3.6.1.4.1.2281.10.8.4.6.15.1.2 | ColumngenEquipServicesNGPWSOAMMAStatusId | read-only | mandatory | Maintenance association ID. |
| 1.3.6.1.4.1.2281.10.8.4.6.15.1.3 | ColumngenEquipServicesNGPWSOAMMAStatusRemoteMepMACAddr | read-only | mandatory | Remote MEP MAC Address. |
| 1.3.6.1.4.1.2281.10.8.4.6.15.1.4 | ColumngenEquipServicesNGPWSOAMMAStatusDefects | read-only | mandatory | Bitmap field: no-alarm (0), RDI (1), MAC-status (2), remote CCM (4), error CCM (8), Cross-connection CCM (16), AIS (32). |
| 1.3.6.1.4.1.2281.10.8.4.6.20 | NodegenEquipServicesNGPWTDM | |||
| 1.3.6.1.4.1.2281.10.8.4.6.20.1 | ScalargenEquipServicesNGPWTDMRevertiveTimer | read-write | mandatory | The WTR (Wait To Restore) timer for revertive switches. |
| 1.3.6.1.4.1.2281.10.8.4.6.20.2 | ScalargenEquipServicesNGPWRangeVC | read-write | mandatory | TDM services VC range. |
| 1.3.6.1.4.1.2281.10.8.4.6.20.3 | ScalargenEquipServicesNGPWOffsetVC | read-write | mandatory | TDM services VC offset. |
| 1.3.6.1.4.1.2281.10.8.4.6.20.4 | ScalargenEquipServicesNGPWLatencyOptimizationAdmin | read-write | mandatory | Enables/Disables the option of choosing a latency-optimized mode for TDM services. |
| 1.3.6.1.4.1.2281.10.8.4.10 | TablegenEquipServicesPWPSNTunnelGroupsTable | not-accessible | mandatory | This table allows configuration of PSN protection groups for pseudowire service path protection. |
| 1.3.6.1.4.1.2281.10.8.4.10.1 | RowgenEquipServicesPWPSNTunnelGroupsEntry | not-accessible | mandatory | This entry table allows configuration of PSN protection groups for pseudowire service path protection. |
| 1.3.6.1.4.1.2281.10.8.4.10.1.1 | ColumngenEquipServicesPWPSNTunnelGroupsTunnelGroupID | read-write | mandatory | PSN Tunnel Group ID. |
| 1.3.6.1.4.1.2281.10.8.4.10.1.2 | ColumngenEquipServicesPWPSNTunnelGroupsTunnelIDPrimary | read-write | mandatory | Primary PSN tunnel ID. |
| 1.3.6.1.4.1.2281.10.8.4.10.1.3 | ColumngenEquipServicesPWPSNTunnelGroupsTunnelIDSecondary | read-write | mandatory | Secondary PSN tunnel ID. |
| 1.3.6.1.4.1.2281.10.8.4.10.1.4 | ColumngenEquipServicesPWPSNTunnelGroupsSwitchToStandby | read-write | mandatory | Force a switch from primary to secondary tunnel. |
| 1.3.6.1.4.1.2281.10.8.4.10.1.30 | ColumngenEquipServicesPWPSNTunnelGroupsRowStatus | read-write | mandatory | This value is the status of the entry. |
| 1.3.6.1.4.1.2281.10.8.4.11 | TablegenEquipServicesPWPSNTunnelGroupStatusTable | not-accessible | mandatory | This table allows monitoring of PSN protection groups status. |
| 1.3.6.1.4.1.2281.10.8.4.11.1 | RowgenEquipServicesPWPSNTunnelGroupStatusEntry | not-accessible | mandatory | This table entry allows monitoring of PSN protection groups status. |
| 1.3.6.1.4.1.2281.10.8.4.11.1.1 | ColumngenEquipServicesPWPSNTunnelGroupStatusTunnelGroupID | read-only | mandatory | PSN Tunnel Group ID. |
| 1.3.6.1.4.1.2281.10.8.4.11.1.2 | ColumngenEquipServicesPWPSNTunnelGroupStatusCurrActiveTunnel | read-only | mandatory | Currently active PSN tunnel. |
| 1.3.6.1.4.1.2281.10.8.4.11.1.3 | ColumngenEquipServicesPWPSNTunnelGroupStatusNumProtSwitches | read-only | mandatory | Counter of PSN tunnel protection switches. |
| 1.3.6.1.4.1.2281.10.8.4.12 | TablegenEquipServicesPWSOAMMDTable | not-accessible | mandatory | This table allows configuration of Ethernet OAM Maintenance Domains for service monitoring and path protection. |
| 1.3.6.1.4.1.2281.10.8.4.12.1 | RowgenEquipServicesPWSOAMMDEntry | not-accessible | mandatory | This table entry allows configuration of Ethernet OAM Maintenance Domains for service monitoring and path protection. |
| 1.3.6.1.4.1.2281.10.8.4.12.1.1 | ColumngenEquipServicesPWSOAMMDDomainID | read-write | mandatory | Domain ID. |
| 1.3.6.1.4.1.2281.10.8.4.12.1.2 | ColumngenEquipServicesPWSOAMMDDomainName | read-write | mandatory | Domain Name. |
| 1.3.6.1.4.1.2281.10.8.4.12.1.3 | ColumngenEquipServicesPWSOAMMDDomainLevel | read-write | mandatory | Domain Level. |
| 1.3.6.1.4.1.2281.10.8.4.12.1.30 | ColumngenEquipServicesPWSOAMMDRowStatus | read-write | mandatory | This value is the status of the entry. |
| 1.3.6.1.4.1.2281.10.8.4.13 | TablegenEquipServicesPWSOAMMATable | not-accessible | mandatory | This table allows configuration of Ethernet OAM Maintenance Association for service monitoring and path protection. |
| 1.3.6.1.4.1.2281.10.8.4.13.1 | RowgenEquipServicesPWSOAMMAEntry | not-accessible | mandatory | This table entry allows configuration of Ethernet OAM Maintenance Association for service monitoring and path protection. |
| 1.3.6.1.4.1.2281.10.8.4.13.1.1 | ColumngenEquipServicesPWSOAMMALocalID | read-write | mandatory | Maintenance Association local ID. |
| 1.3.6.1.4.1.2281.10.8.4.13.1.2 | ColumngenEquipServicesPWSOAMMALocalName | read-write | mandatory | Maintenance Association local Name. |
| 1.3.6.1.4.1.2281.10.8.4.13.1.3 | ColumngenEquipServicesPWSOAMMADomainID | read-write | mandatory | Maintenance Association domain ID. |
| 1.3.6.1.4.1.2281.10.8.4.13.1.4 | ColumngenEquipServicesPWSOAMMAAdmin | read-write | mandatory | Maintenance Association Admin. |
| 1.3.6.1.4.1.2281.10.8.4.13.1.5 | ColumngenEquipServicesPWSOAMMALocalMEP | read-write | mandatory | Maintenance Association local MEP ID. |
| 1.3.6.1.4.1.2281.10.8.4.13.1.6 | ColumngenEquipServicesPWSOAMMARemoteMEP | read-write | mandatory | Maintenance Association remote MEP ID. |
| 1.3.6.1.4.1.2281.10.8.4.13.1.7 | ColumngenEquipServicesPWSOAMMAVlanType | read-write | mandatory | VLAN type of the Maintenance Association. |
| 1.3.6.1.4.1.2281.10.8.4.13.1.8 | ColumngenEquipServicesPWSOAMMAVlanID | read-write | mandatory | VLAN Id of the Maintenance Association. |
| 1.3.6.1.4.1.2281.10.8.4.13.1.9 | ColumngenEquipServicesPWSOAMMACCMInterval | read-write | mandatory | CCM Interval. |
| 1.3.6.1.4.1.2281.10.8.4.13.1.10 | ColumngenEquipServicesPWSOAMMACCMAdmin | read-write | mandatory | Maintenance Association CCM admin. |
| 1.3.6.1.4.1.2281.10.8.4.13.1.11 | ColumngenEquipServicesPWSOAMMACCMPriority | read-write | mandatory | CCM Priority. |
| 1.3.6.1.4.1.2281.10.8.4.13.1.12 | ColumngenEquipServicesPWSOAMMARemoteMEPAddr | read-write | mandatory | MAC Address of the Maintenance Association Remote MEP. |
| 1.3.6.1.4.1.2281.10.8.4.13.1.13 | ColumngenEquipServicesPWSOAMMADefects | read-write | mandatory | Bitmap field: no-alarm (0), RDI (1), MAC-status (2), remote CCM (4), error CCM (8), Cross-connection CCM (16), AIS (32). |
| 1.3.6.1.4.1.2281.10.8.4.13.1.30 | ColumngenEquipServicesPWSOAMMARowStatus | read-write | mandatory | This value is the status of the entry. |
| 1.3.6.1.4.1.2281.10.8.5 | NodegenEquipServicesCet | |||
| 1.3.6.1.4.1.2281.10.8.5.1 | NodegenEquipServicesCetGeneral | |||
| 1.3.6.1.4.1.2281.10.8.5.1.1 | ScalargenEquipServicesCetSvlanEtherType | read-write | mandatory | S VLAN Ether type. |
| 1.3.6.1.4.1.2281.10.8.5.1.2 | ScalargenEquipServicesCetAgingTimeout | read-write | mandatory | MAC forwarding entry aging timeout in seconds. |
| 1.3.6.1.4.1.2281.10.8.5.2 | TablegenEquipServicesCetConfigTable | not-accessible | mandatory | Ethernet Services configuration table - the table describes the connectivity between the interface of the switch. |
| 1.3.6.1.4.1.2281.10.8.5.2.1 | RowgenEquipServicesCetConfigEntry | not-accessible | mandatory | Ethernet Services configuration table entry - the table describes the connectivity between the interface of the switch. |
| 1.3.6.1.4.1.2281.10.8.5.2.1.1 | ColumngenEquipServicesCetConfigIndex | read-only | mandatory | Service ID. |
| 1.3.6.1.4.1.2281.10.8.5.2.1.2 | ColumngenEquipServicesCetConfigType | read-write | mandatory | Ethernet Service Type (Management, MP, P2P). |
| 1.3.6.1.4.1.2281.10.8.5.2.1.3 | ColumngenEquipServicesCetConfigAdmin | read-write | mandatory | Service Admin state. |
| 1.3.6.1.4.1.2281.10.8.5.2.1.4 | ColumngenEquipServicesCetConfigMacTableSize | read-write | mandatory | MAC Table size of the service,granularity of 16. |
| 1.3.6.1.4.1.2281.10.8.5.2.1.5 | ColumngenEquipServicesCetConfigDefaultCos | read-write | mandatory | Service default CoS. |
| 1.3.6.1.4.1.2281.10.8.5.2.1.6 | ColumngenEquipServicesCetConfigCosMode | read-write | mandatory | Service CoS Color mode. |
| 1.3.6.1.4.1.2281.10.8.5.2.1.7 | ColumngenEquipServicesCetConfigEvcId | read-write | mandatory | Ethernet Virtual Connection (EVC) ID. |
| 1.3.6.1.4.1.2281.10.8.5.2.1.8 | ColumngenEquipServicesCetConfigEvcDescription | read-write | mandatory | Ethernet Virtual Connection (EVC) Description. |
| 1.3.6.1.4.1.2281.10.8.5.2.1.9 | ColumngenEquipServicesCetConfigSplitHorizon | read-write | mandatory | Split Horizon group Admin. |
| 1.3.6.1.4.1.2281.10.8.5.2.1.10 | ColumngenEquipServicesCetConfigResiliencyProtocolInstance | read-write | mandatory | Resiliency Protocol Instance. |
| 1.3.6.1.4.1.2281.10.8.5.2.1.11 | ColumngenEquipServicesCetConfigProtectingTrail | read-write | mandatory | Protecting trail. |
| 1.3.6.1.4.1.2281.10.8.5.2.1.12 | ColumngenEquipServicesCetConfigProtectingTrailIndex | read-write | mandatory | Protecting trail id. |
| 1.3.6.1.4.1.2281.10.8.5.2.1.13 | ColumngenEquipServicesCetConfigServiceSubType | read-write | mandatory | Service sub type (Ethernet / TDM / PWE) |
| 1.3.6.1.4.1.2281.10.8.5.2.1.14 | ColumngenEquipServicesCetConfigTrailIndex | read-write | mandatory | TDM Trail ID |
| 1.3.6.1.4.1.2281.10.8.5.2.1.30 | ColumngenEquipServicesCetConfigRowStatus | read-write | mandatory | Table Mib Row Status. |
| 1.3.6.1.4.1.2281.10.8.5.3 | TablegenEquipServicesCetStatusTable | not-accessible | mandatory | Ethernet Services status table - the table describes the status of the configured services. |
| 1.3.6.1.4.1.2281.10.8.5.3.1 | RowgenEquipServicesCetStatusEntry | not-accessible | mandatory | Ethernet Services status table - the table describes the status of the configured services entry. |
| 1.3.6.1.4.1.2281.10.8.5.3.1.1 | ColumngenEquipServicesCetStatusIndex | read-only | mandatory | Service ID. |
| 1.3.6.1.4.1.2281.10.8.5.3.1.2 | ColumngenEquipServicesCetStatusMulticast | read-only | mandatory | Configured Multicast Group. |
| 1.3.6.1.4.1.2281.10.8.5.4 | TablegenEquipServicesCetSpConfigTable | not-accessible | mandatory | Ethernet Service Points (SP) configuration table - this table describes the ingress and egress attributes (operation) per SPs of each service. |
| 1.3.6.1.4.1.2281.10.8.5.4.1 | RowgenEquipServicesCetSpConfigEntry | not-accessible | mandatory | Ethernet Service Points (SP) configuration table entry - this table describes the ingress and egress attributes (operation) per SPs of each service. |
| 1.3.6.1.4.1.2281.10.8.5.4.1.1 | ColumngenEquipServicesCetSpConfigServiceIndex | read-only | mandatory | Service ID. |
| 1.3.6.1.4.1.2281.10.8.5.4.1.2 | ColumngenEquipServicesCetSpConfigServicePointIndex | read-only | mandatory | Service Point ID. |
| 1.3.6.1.4.1.2281.10.8.5.4.1.3 | ColumngenEquipServicesCetSpConfigSpType | read-write | mandatory | Service Point Type (SAP, SNP, PIPE, MNG). |
| 1.3.6.1.4.1.2281.10.8.5.4.1.4 | ColumngenEquipServicesCetSpConfigSpSubtype | read-write | mandatory | The Service Point Attached Interface Type. |
| 1.3.6.1.4.1.2281.10.8.5.4.1.5 | ColumngenEquipServicesCetSpConfigSpName | read-write | mandatory | Service Point Name. |
| 1.3.6.1.4.1.2281.10.8.5.4.1.6 | ColumngenEquipServicesCetSpConfigIfIndex | read-write | mandatory | Ethernet Logical port if-index ID. |
| 1.3.6.1.4.1.2281.10.8.5.4.1.7 | ColumngenEquipServicesCetSpConfigSvlanEncap | read-write | mandatory | S-Vlan Encapsulation. |
| 1.3.6.1.4.1.2281.10.8.5.4.1.8 | ColumngenEquipServicesCetSpConfigCvlanEncap | read-write | mandatory | C-Vlan Encapsulation. |
| 1.3.6.1.4.1.2281.10.8.5.4.1.9 | ColumngenEquipServicesCetSpConfigLearning | read-write | mandatory | Service Point Learning Admin (disable / enable). |
| 1.3.6.1.4.1.2281.10.8.5.4.1.10 | ColumngenEquipServicesCetSpConfigFlooding | read-write | mandatory | SP Ingress aatribute - Allow Flooding of the incoming packet. |
| 1.3.6.1.4.1.2281.10.8.5.4.1.11 | ColumngenEquipServicesCetSpConfigBroadcast | read-write | mandatory | SP Ingress aatribute - Allow Broadcast of the incoming packet. |
| 1.3.6.1.4.1.2281.10.8.5.4.1.12 | ColumngenEquipServicesCetSpConfigCosMode | read-write | mandatory | Service Point CoS Color mode. |
| 1.3.6.1.4.1.2281.10.8.5.4.1.13 | ColumngenEquipServicesCetSpConfigDefCos | read-write | mandatory | Service Point Default CoS. |
| 1.3.6.1.4.1.2281.10.8.5.4.1.14 | ColumngenEquipServicesCetSpConfigPclProfileId | read-write | mandatory | pcl-profile-id. |
| 1.3.6.1.4.1.2281.10.8.5.4.1.15 | ColumngenEquipServicesCetSpConfigPclAdmin | read-write | mandatory | PCL Admin. |
| 1.3.6.1.4.1.2281.10.8.5.4.1.16 | ColumngenEquipServicesCetSpConfigMonitorCounterGroup | read-write | mandatory | SP Ingress attribute - Assign the SP to a specific Monitor Counters Group. |
| 1.3.6.1.4.1.2281.10.8.5.4.1.17 | ColumngenEquipServicesCetSpConfigSplitHorizon | read-write | mandatory | Split Horizon Group. |
| 1.3.6.1.4.1.2281.10.8.5.4.1.18 | ColumngenEquipServicesCetSpConfigSvlanEgressPreserve | read-write | mandatory | SP Egress attribute - Preserve the S VLAN as it was on the Ingress Service Point. |
| 1.3.6.1.4.1.2281.10.8.5.4.1.19 | ColumngenEquipServicesCetSpConfigSvlanCosPreserve | read-write | mandatory | SP Egress attribute - Preserve the S VLAN CoS as it was on the Ingress Service Point. |
| 1.3.6.1.4.1.2281.10.8.5.4.1.20 | ColumngenEquipServicesCetSpConfigCvlanEgressPreserve | read-write | mandatory | SP Egress attribute - Preserve the C VLAN as it was on the Ingress Service Point. |
| 1.3.6.1.4.1.2281.10.8.5.4.1.21 | ColumngenEquipServicesCetSpConfigCvlanCosPreserve | read-write | mandatory | SP Egress attribute - Preserve the C VLAN CoS as it was on the Ingress Service Point. |
| 1.3.6.1.4.1.2281.10.8.5.4.1.22 | ColumngenEquipServicesCetSpConfigMarkingMode | read-write | mandatory | SP Ingress attribute - Enable / Disable Marking of the incoming packet. |
| 1.3.6.1.4.1.2281.10.8.5.4.1.23 | ColumngenEquipServicesCetSpConfigServiceClassId | read-write | mandatory | SP Egress attribute - Service Bundle ID. |
| 1.3.6.1.4.1.2281.10.8.5.4.1.24 | ColumngenEquipServicesCetSpConfigTcamClassification | read-write | mandatory | TCAM-Classification. |
| 1.3.6.1.4.1.2281.10.8.5.4.1.30 | ColumngenEquipServicesCetSpConfigRowStatus | read-write | mandatory | Table Mib Row Status. |
| 1.3.6.1.4.1.2281.10.8.5.5 | TablegenEquipServicesCetSpPolicerAssociationTable | not-accessible | mandatory | Service Point and Service Point CoS Policing configuration table. |
| 1.3.6.1.4.1.2281.10.8.5.5.1 | RowgenEquipServicesCetSpPolicerAssociationEntry | not-accessible | mandatory | Service Point and Service Point CoS Policing configuration table. |
| 1.3.6.1.4.1.2281.10.8.5.5.1.1 | ColumngenEquipServicesCetSpPolicerAssociationServiceIndex | read-only | mandatory | Service ID. |
| 1.3.6.1.4.1.2281.10.8.5.5.1.2 | ColumngenEquipServicesCetSpPolicerAssociationSpIndex | read-only | mandatory | Service Point ID. |
| 1.3.6.1.4.1.2281.10.8.5.5.1.3 | ColumngenEquipServicesCetSpPolicerAssociationSpPolicerAdmin | read-write | mandatory | Service Point Policer Admin (enable / disable). |
| 1.3.6.1.4.1.2281.10.8.5.5.1.4 | ColumngenEquipServicesCetSpPolicerAssociationCos0Profile | read-write | mandatory | CoS 0 Policer attached Profile ID. |
| 1.3.6.1.4.1.2281.10.8.5.5.1.5 | ColumngenEquipServicesCetSpPolicerAssociationCos0Admin | read-write | mandatory | CoS 0 Policer Admin (enable / disable). |
| 1.3.6.1.4.1.2281.10.8.5.5.1.6 | ColumngenEquipServicesCetSpPolicerAssociationCos1Profile | read-write | mandatory | CoS 1 Policer attached Profile ID. |
| 1.3.6.1.4.1.2281.10.8.5.5.1.7 | ColumngenEquipServicesCetSpPolicerAssociationCos1Admin | read-write | mandatory | CoS 1 Policer Admin (enable / disable). |
| 1.3.6.1.4.1.2281.10.8.5.5.1.8 | ColumngenEquipServicesCetSpPolicerAssociationCos2Profile | read-write | mandatory | CoS 2 Policer attached Profile ID. |
| 1.3.6.1.4.1.2281.10.8.5.5.1.9 | ColumngenEquipServicesCetSpPolicerAssociationCos2Admin | read-write | mandatory | CoS 2 Policer Admin (enable / disable). |
| 1.3.6.1.4.1.2281.10.8.5.5.1.10 | ColumngenEquipServicesCetSpPolicerAssociationCos3Profile | read-write | mandatory | CoS 3 Policer attached Profile ID. |
| 1.3.6.1.4.1.2281.10.8.5.5.1.11 | ColumngenEquipServicesCetSpPolicerAssociationCos3Admin | read-write | mandatory | CoS 3 Policer Admin (enable / disable). |
| 1.3.6.1.4.1.2281.10.8.5.5.1.12 | ColumngenEquipServicesCetSpPolicerAssociationCos4Profile | read-write | mandatory | CoS 4 Policer attached Profile ID. |
| 1.3.6.1.4.1.2281.10.8.5.5.1.13 | ColumngenEquipServicesCetSpPolicerAssociationCos4Admin | read-write | mandatory | CoS 4 Policer Admin (enable / disable). |
| 1.3.6.1.4.1.2281.10.8.5.5.1.14 | ColumngenEquipServicesCetSpPolicerAssociationCos5Profile | read-write | mandatory | CoS 5 Policer attached Profile ID. |
| 1.3.6.1.4.1.2281.10.8.5.5.1.15 | ColumngenEquipServicesCetSpPolicerAssociationCos5Admin | read-write | mandatory | CoS 5 Policer Admin (enable / disable). |
| 1.3.6.1.4.1.2281.10.8.5.5.1.16 | ColumngenEquipServicesCetSpPolicerAssociationCos6Profile | read-write | mandatory | CoS 6 Policer attached Profile ID. |
| 1.3.6.1.4.1.2281.10.8.5.5.1.17 | ColumngenEquipServicesCetSpPolicerAssociationCos6Admin | read-write | mandatory | CoS 6 Policer Admin (enable / disable). |
| 1.3.6.1.4.1.2281.10.8.5.5.1.18 | ColumngenEquipServicesCetSpPolicerAssociationCos7Profile | read-write | mandatory | CoS 7 Policer attached Profile ID. |
| 1.3.6.1.4.1.2281.10.8.5.5.1.19 | ColumngenEquipServicesCetSpPolicerAssociationCos7Admin | read-write | mandatory | CoS 7 Policer Admin (enable / disable). |
| 1.3.6.1.4.1.2281.10.8.5.5.1.30 | ColumngenEquipServicesCetSpPolicerAssociationRowStatus | read-write | mandatory | Table Mib Row Status. |
| 1.3.6.1.4.1.2281.10.8.5.6 | TablegenEquipServicesCetSpVlanMappingTable | not-accessible | mandatory | The table holds the VLAN TAG ID that build a single ingress classification of Port+OutterVLAN+InnerVLAN to Service Point. |
| 1.3.6.1.4.1.2281.10.8.5.6.1 | RowgenEquipServicesCetSpVlanMappingEntry | not-accessible | mandatory | The table holds the VLAN TAG ID that build a single ingress classification of Port+OutterVLAN+InnerVLAN to Service Point. |
| 1.3.6.1.4.1.2281.10.8.5.6.1.1 | ColumngenEquipServicesCetSpVlanMappingServiceId | read-only | mandatory | Service ID. |
| 1.3.6.1.4.1.2281.10.8.5.6.1.2 | ColumngenEquipServicesCetSpVlanMappingSpId | read-only | mandatory | Service Point ID. |
| 1.3.6.1.4.1.2281.10.8.5.6.1.3 | ColumngenEquipServicesCetSpVlanMappingSvlanIndex | read-only | mandatory | S-Vlan Encapsulation. |
| 1.3.6.1.4.1.2281.10.8.5.6.1.4 | ColumngenEquipServicesCetSpVlanMappingCvlanIndex | read-only | mandatory | C-Vlan Encapsulation. |
| 1.3.6.1.4.1.2281.10.8.5.6.1.5 | ColumngenEquipServicesCetSpVlanMappingVlanCosOverride | read-write | mandatory | The CoS Value field is valid. |
| 1.3.6.1.4.1.2281.10.8.5.6.1.6 | ColumngenEquipServicesCetSpVlanMappingVlanDefCos | read-write | mandatory | CoS overwrite value. |
| 1.3.6.1.4.1.2281.10.8.5.6.1.7 | ColumngenEquipServicesCetSpVlanMappingColor | read-write | mandatory | Service Point COLOR. |
| 1.3.6.1.4.1.2281.10.8.5.6.1.8 | ColumngenEquipServicesCetSpVlanMappingIfIndex | read-only | mandatory | Ethernet Logical port if-index table key. |
| 1.3.6.1.4.1.2281.10.8.5.6.1.9 | ColumngenEquipServicesCetSpVlanMappingIfSlotIndex | read-only | mandatory | Slot index. |
| 1.3.6.1.4.1.2281.10.8.5.6.1.10 | ColumngenEquipServicesCetSpVlanMappingIfPortIndex | read-only | mandatory | Port index. |
| 1.3.6.1.4.1.2281.10.8.5.6.1.30 | ColumngenEquipServicesCetSpVlanMappingRowStatus | read-write | mandatory | Table Mib Row Status. |
| 1.3.6.1.4.1.2281.10.8.5.7 | TablegenEquipServicesCETTmPmSpEgressClearAllL2InterfaceQueuesStatisticsTable | not-accessible | mandatory | Clear all interface egress queues statistics. |
| 1.3.6.1.4.1.2281.10.8.5.7.1 | RowgenEquipServicesCETTmPmSpEgressClearAllL2InterfaceQueuesStatisticsEntry | not-accessible | mandatory | Clear all interface egress queues statistics. |
| 1.3.6.1.4.1.2281.10.8.5.7.1.1 | ColumngenEquipServicesCETTmPmSpEgressClearAllL2InterfaceQueuesStatisticsIfIndex | read-only | mandatory | ifIndex. |
| 1.3.6.1.4.1.2281.10.8.5.7.1.2 | ColumngenEquipServicesCETTmPmSpEgressClearAllL2InterfaceQueuesStatisticsClearOnRead | read-write | mandatory | Clear all statistics for the specific port. |
| 1.3.6.1.4.1.2281.10.8.5.8 | TablegenEquipServicesCETTmPmSpEgressClearAllL3ServiceQueuesStatisticsTable | not-accessible | mandatory | Clear all Service egress queues statistics. |
| 1.3.6.1.4.1.2281.10.8.5.8.1 | RowgenEquipServicesCETTmPmSpEgressClearAllL3ServiceQueuesStatisticsEntry | not-accessible | mandatory | Clear all Service egress queues statistics. |
| 1.3.6.1.4.1.2281.10.8.5.8.1.1 | ColumngenEquipServicesCETTmPmSpEgressClearAllL3ServiceQueuesStatisticsIfIndex | read-only | mandatory | ifIndex. |
| 1.3.6.1.4.1.2281.10.8.5.8.1.2 | ColumngenEquipServicesCETTmPmSpEgressClearAllL3ServiceQueuesStatisticsServiceIndex | read-only | mandatory | Egress service bundle ID. |
| 1.3.6.1.4.1.2281.10.8.5.8.1.3 | ColumngenEquipServicesCETTmPmSpEgressClearAllL3ServiceQueuesStatisticsClearOnRead | read-write | mandatory | clear on read. |
| 1.3.6.1.4.1.2281.10.8.6 | NodegenEquipServicesTM | |||
| 1.3.6.1.4.1.2281.10.8.6.1 | NodegenEquipTmMapping | |||
| 1.3.6.1.4.1.2281.10.8.6.1.1 | TablegenEquipTmMappingSVlanPriToCosTable | not-accessible | mandatory | Global 802.1AD classification table to CoS and Color. |
| 1.3.6.1.4.1.2281.10.8.6.1.1.1 | RowgenEquipTmMappingSVlanPriToCosEntry | not-accessible | mandatory | Global 802.1AD classification table to CoS and Color entry. |
| 1.3.6.1.4.1.2281.10.8.6.1.1.1.1 | ColumngenEquipTmMappingSVlanPriToCosUpIndex | read-only | mandatory | User Priority bits - Global 802.1AD User Priority and DEI bits classification table to CoS and Color. |
| 1.3.6.1.4.1.2281.10.8.6.1.1.1.2 | ColumngenEquipTmMappingSVlanPriToCosDeiIndex | read-only | mandatory | DEI bit - Global 802.1AD User Priority and DEI bits classification table to CoS and Color. |
| 1.3.6.1.4.1.2281.10.8.6.1.1.1.3 | ColumngenEquipTmMappingSVlanPriToCosCos | read-write | mandatory | CoS bits - Global 802.1AD User Priority and DEI bits classification table to CoS and Color. |
| 1.3.6.1.4.1.2281.10.8.6.1.1.1.4 | ColumngenEquipTmMappingSVlanPriToCosColor | read-write | mandatory | Color bit - Global 802.1AD User Priority and DEI bits classification table to CoS and Color. |
| 1.3.6.1.4.1.2281.10.8.6.1.2 | TablegenEquipTmMappingCVlanPriToCosTable | not-accessible | mandatory | Global 802.1Q classification table to CoS and Color. |
| 1.3.6.1.4.1.2281.10.8.6.1.2.1 | RowgenEquipTmMappingCVlanPriToCosEntry | not-accessible | mandatory | Global 802.1Q classification table to CoS and Color entry. |
| 1.3.6.1.4.1.2281.10.8.6.1.2.1.1 | ColumngenEquipTmMappingCVlanPriToCosUpIndex | read-only | mandatory | User Priority bits - Global 802.1Q User Priority and CFI bits classification table to CoS and Color. |
| 1.3.6.1.4.1.2281.10.8.6.1.2.1.2 | ColumngenEquipTmMappingCVlanPriToCosCfiIndex | read-only | mandatory | CFI bit - Global 802.1Q User Priority and CFI bits classification table to CoS and Color. |
| 1.3.6.1.4.1.2281.10.8.6.1.2.1.3 | ColumngenEquipTmMappingCVlanPriToCosCos | read-write | mandatory | CoS bits - Global 802.1AD User Priority and DEI bits classification table to CoS and Color. |
| 1.3.6.1.4.1.2281.10.8.6.1.2.1.4 | ColumngenEquipTmMappingCVlanPriToCosColor | read-write | mandatory | Color bit - Global 802.1Q User Priority and CFI bits classification table to CoS and Color. |
| 1.3.6.1.4.1.2281.10.8.6.1.3 | TablegenEquipTmMappingDscpToCosTable | not-accessible | mandatory | Global DSCP bits classification table to CoS and Color. |
| 1.3.6.1.4.1.2281.10.8.6.1.3.1 | RowgenEquipTmMappingDscpToCosEntry | not-accessible | mandatory | Global DSCP bits classification table to CoS and Color entry. |
| 1.3.6.1.4.1.2281.10.8.6.1.3.1.1 | ColumngenEquipTmMappingDscpToCosDscpIndex | read-only | mandatory | DSCP bits - Global DSCP bits classification table to CoS and Color. |
| 1.3.6.1.4.1.2281.10.8.6.1.3.1.2 | ColumngenEquipTmMappingDscpToCosBinary | read-write | mandatory | Global DSCP bits classification table to CoS and Color. |
| 1.3.6.1.4.1.2281.10.8.6.1.3.1.3 | ColumngenEquipTmMappingDscpToCosDescription | read-write | mandatory | user description field - Global DSCP bits classification table to CoS and Color. |
| 1.3.6.1.4.1.2281.10.8.6.1.3.1.4 | ColumngenEquipTmMappingDscpToCosCos | read-write | mandatory | CoS bits - Global DSCP bits classification table to CoS and Color. |
| 1.3.6.1.4.1.2281.10.8.6.1.3.1.5 | ColumngenEquipTmMappingDscpToCosColor | read-write | mandatory | Color bit - Global DSCP bits classification table to CoS and Color. |
| 1.3.6.1.4.1.2281.10.8.6.1.4 | TablegenEquipTmMappingMPLSExpPriToCosTable | not-accessible | mandatory | Color bit - Global MPLS EXP bits classification table to CoS and Color. |
| 1.3.6.1.4.1.2281.10.8.6.1.4.1 | RowgenEquipTmMappingMPLSExpPriToCosEntry | not-accessible | mandatory | Color bit - Global MPLS EXP bits classification table to CoS and Color entry. |
| 1.3.6.1.4.1.2281.10.8.6.1.4.1.1 | ColumngenEquipTmMappingMPLSExpPriToCosMplsExpIndex | read-only | mandatory | Experimental bits - Global MPLS EXP bits classification table to CoS and Color. |
| 1.3.6.1.4.1.2281.10.8.6.1.4.1.2 | ColumngenEquipTmMappingMPLSExpPriToCosCos | read-write | mandatory | CoS bit - Global MPLS EXP bits classification table to CoS and Color. |
| 1.3.6.1.4.1.2281.10.8.6.1.4.1.3 | ColumngenEquipTmMappingMPLSExpPriToCosColor | read-write | mandatory | Color bit - Global MPLS EXP bits classification table to CoS and Color. |
| 1.3.6.1.4.1.2281.10.8.6.1.5 | TablegenEquipTmMarkingSVlanPriTable | not-accessible | mandatory | Global 802.1AD Marking Table User CoS and Color to User Priority bits and DEI. |
| 1.3.6.1.4.1.2281.10.8.6.1.5.1 | RowgenEquipTmMarkingSVlanPriEntry | not-accessible | mandatory | Global 802.1AD Marking Table User CoS and Color to User Priority bits and DEI entry. |
| 1.3.6.1.4.1.2281.10.8.6.1.5.1.1 | ColumngenEquipTmMarkingSVlanPriCosIndex | read-only | mandatory | CoS bits - Global 802.1AD Marking Table User CoS and Color to User Priority bits and DEI. |
| 1.3.6.1.4.1.2281.10.8.6.1.5.1.2 | ColumngenEquipTmMarkingSVlanPriColorIndex | read-only | mandatory | Color bit - Global 802.1AD Marking Table User CoS and Color to User Priority bits and DEI. |
| 1.3.6.1.4.1.2281.10.8.6.1.5.1.3 | ColumngenEquipTmMarkingSVlanPriUserPriority | read-write | mandatory | User Priority bits - Global 802.1AD Marking Table User CoS and Color to User Priority bits and DEI. |
| 1.3.6.1.4.1.2281.10.8.6.1.5.1.4 | ColumngenEquipTmMarkingSVlanPriDEI | read-write | mandatory | DEI bit - Global 802.1AD Marking Table User CoS and Color to User Priority bits and DEI. |
| 1.3.6.1.4.1.2281.10.8.6.1.6 | TablegenEquipTmMarkingCVlanPriTable | not-accessible | mandatory | Global 802.1Q Marking Table User CoS and Color to User Priority bits and CFI. |
| 1.3.6.1.4.1.2281.10.8.6.1.6.1 | RowgenEquipTmMarkingCVlanPriEntry | not-accessible | mandatory | Global 802.1Q Marking Table User CoS and Color to User Priority bits and CFI entry. |
| 1.3.6.1.4.1.2281.10.8.6.1.6.1.1 | ColumngenEquipTmMarkingCVlanPriCosIndex | read-only | mandatory | CoS bits - Global 802.1Q Marking Table User CoS and Color to User Priority bits and CFI. |
| 1.3.6.1.4.1.2281.10.8.6.1.6.1.2 | ColumngenEquipTmMarkingCVlanPriColorIndex | read-only | mandatory | Color bit - Global 802.1Q Marking Table User CoS and Color to User Priority bits and CFI. |
| 1.3.6.1.4.1.2281.10.8.6.1.6.1.3 | ColumngenEquipTmMarkingCVlanPriUserPriority | read-write | mandatory | User Priority bits - Global 802.1Q Marking Table User CoS and Color to User Priority bits and CFI. |
| 1.3.6.1.4.1.2281.10.8.6.1.6.1.4 | ColumngenEquipTmMarkingCVlanPriCFI | read-write | mandatory | CFI bit - Global 802.1Q Marking Table User CoS and Color to User Priority bits and CFI. |
| 1.3.6.1.4.1.2281.10.8.6.2 | NodegenEquipTmProfiles | |||
| 1.3.6.1.4.1.2281.10.8.6.2.1 | TablegenEquipProfilesPolicerTable | not-accessible | mandatory | General Policer Profile configuration table. |
| 1.3.6.1.4.1.2281.10.8.6.2.1.1 | RowgenEquipProfilesPolicerEntry | not-accessible | mandatory | General Policer Profile configuration table entry. |
| 1.3.6.1.4.1.2281.10.8.6.2.1.1.1 | ColumngenEquipProfilesPolicerIndex | read-only | mandatory | User Profile ID number. |
| 1.3.6.1.4.1.2281.10.8.6.2.1.1.2 | ColumngenEquipProfilesPolicerDescription | read-write | mandatory | Ingress Policer user Description field. |
| 1.3.6.1.4.1.2281.10.8.6.2.1.1.3 | ColumngenEquipProfilesPolicerPolicerType | read-only | mandatory | Ingress Policer Type (MEF TrTCM,RFC2697,RFC2698). |
| 1.3.6.1.4.1.2281.10.8.6.2.1.1.4 | ColumngenEquipProfilesPolicerCir | read-write | mandatory | Ingress Policer Commited Information Rate (CIR). |
| 1.3.6.1.4.1.2281.10.8.6.2.1.1.5 | ColumngenEquipProfilesPolicerCbs | read-write | mandatory | Ingress Policer Commited Burst Size (CBS). |
| 1.3.6.1.4.1.2281.10.8.6.2.1.1.6 | ColumngenEquipProfilesPolicerEir | read-write | mandatory | Ingress Policer Excess Information Rate (EIR). |
| 1.3.6.1.4.1.2281.10.8.6.2.1.1.7 | ColumngenEquipProfilesPolicerEbs | read-write | mandatory | Ingress Policer Excess Burst Size (EBS). |
| 1.3.6.1.4.1.2281.10.8.6.2.1.1.8 | ColumngenEquipProfilesPolicerColorMode | read-write | mandatory | Ingress Policer Color Mode (Color Aware or Color Blind). |
| 1.3.6.1.4.1.2281.10.8.6.2.1.1.9 | ColumngenEquipProfilesPolicerCouplingFlagMode | read-write | mandatory | Ingress Policer Coupling Flag between Green and Yellow leaky buckets. |
| 1.3.6.1.4.1.2281.10.8.6.2.1.1.10 | ColumngenEquipProfilesPolicerDataPlaneId | read-only | mandatory | The real policer ID in the dataplan 0 to 10000. |
| 1.3.6.1.4.1.2281.10.8.6.2.1.1.30 | ColumngenEquipProfilesPolicerRowStatus | read-write | mandatory | Table Mib Row Status. |
| 1.3.6.1.4.1.2281.10.8.6.2.2 | TablegenEquipProfilesL4WredTable | not-accessible | mandatory | Green Curve Maximal Drop Ratio (in percentage). |
| 1.3.6.1.4.1.2281.10.8.6.2.2.1 | RowgenEquipProfilesL4WredEntry | not-accessible | mandatory | Green Curve Maximal Drop Ratio (in percentage) entry. |
| 1.3.6.1.4.1.2281.10.8.6.2.2.1.1 | ColumngenEquipProfilesL4WredIndex | read-only | mandatory | WRED Curves Profile ID. |
| 1.3.6.1.4.1.2281.10.8.6.2.2.1.2 | ColumngenEquipProfilesL4WredGreenMinThreshold | read-write | mandatory | Green Curve Minimal occupancy (No drop until this level). |
| 1.3.6.1.4.1.2281.10.8.6.2.2.1.3 | ColumngenEquipProfilesL4WredGreenMaxThreshold | read-write | mandatory | Green Curve Maximal occupancy (from this point 100% will be dropped). |
| 1.3.6.1.4.1.2281.10.8.6.2.2.1.4 | ColumngenEquipProfilesL4WredGreenMaxDrop | read-write | mandatory | Green Curve Maximal Drop Ratio (in percentage). |
| 1.3.6.1.4.1.2281.10.8.6.2.2.1.5 | ColumngenEquipProfilesL4WredYellowMinThreshold | read-write | mandatory | Yellow Curve Minimal occupancy (No drop until this level). |
| 1.3.6.1.4.1.2281.10.8.6.2.2.1.6 | ColumngenEquipProfilesL4WredYellowMaxThreshold | read-write | mandatory | Yellow Curve Maximal occupancy (from this point 100% will be dropped). |
| 1.3.6.1.4.1.2281.10.8.6.2.2.1.7 | ColumngenEquipProfilesL4WredYellowMaxDrop | read-write | mandatory | Yellow Curve Maximal Drop Ratio (in percentage). |
| 1.3.6.1.4.1.2281.10.8.6.2.2.1.30 | ColumngenEquipProfilesL4WredYellowRowStatus | read-write | mandatory | Table Mib Row Status. |
| 1.3.6.1.4.1.2281.10.8.6.2.3 | TablegenEquipProfilesSchedulerCoSPriTable | not-accessible | mandatory | The table holds the Egress Scheduler Port priority profile (each profile contain 8 priorities per 8 queues of single port). |
| 1.3.6.1.4.1.2281.10.8.6.2.3.1 | RowgenEquipProfilesSchedulerCoSPriEntry | not-accessible | mandatory | The table entry holds the Egress Scheduler Port priority profile (each profile contain 8 priorities per 8 queues of single port). |
| 1.3.6.1.4.1.2281.10.8.6.2.3.1.1 | ColumngenEquipProfilesSchedulerCoSPriIndex | read-only | mandatory | Profile ID. |
| 1.3.6.1.4.1.2281.10.8.6.2.3.1.2 | ColumngenEquipProfilesSchedulerCoSPriCos0Description | read-write | mandatory | CoS 0 Description. |
| 1.3.6.1.4.1.2281.10.8.6.2.3.1.3 | ColumngenEquipProfilesSchedulerCoSPriGreenCos0Priority | read-write | mandatory | Green CoS 0 priority. |
| 1.3.6.1.4.1.2281.10.8.6.2.3.1.4 | ColumngenEquipProfilesSchedulerCoSPriCos1description | read-write | mandatory | CoS 1 Description. |
| 1.3.6.1.4.1.2281.10.8.6.2.3.1.5 | ColumngenEquipProfilesSchedulerCoSPriGreenCos1Priority | read-write | mandatory | Green CoS 1 priority. |
| 1.3.6.1.4.1.2281.10.8.6.2.3.1.6 | ColumngenEquipProfilesSchedulerCoSPriCos2Description | read-write | mandatory | CoS 2 Description. |
| 1.3.6.1.4.1.2281.10.8.6.2.3.1.7 | ColumngenEquipProfilesSchedulerCoSPriGreenCos2Priority | read-write | mandatory | Green CoS 2 priority. |
| 1.3.6.1.4.1.2281.10.8.6.2.3.1.8 | ColumngenEquipProfilesSchedulerCoSPriCos3description | read-write | mandatory | CoS 3 Description. |
| 1.3.6.1.4.1.2281.10.8.6.2.3.1.9 | ColumngenEquipProfilesSchedulerCoSPriGreenCos3Priority | read-write | mandatory | Green CoS 3 priority. |
| 1.3.6.1.4.1.2281.10.8.6.2.3.1.10 | ColumngenEquipProfilesSchedulerCoSPriCos4description | read-write | mandatory | CoS 4 Description. |
| 1.3.6.1.4.1.2281.10.8.6.2.3.1.11 | ColumngenEquipProfilesSchedulerCoSPriGreenCos4Priority | read-write | mandatory | Green CoS 4 priority. |
| 1.3.6.1.4.1.2281.10.8.6.2.3.1.12 | ColumngenEquipProfilesSchedulerCoSPriCos5description | read-write | mandatory | CoS 5 Description. |
| 1.3.6.1.4.1.2281.10.8.6.2.3.1.13 | ColumngenEquipProfilesSchedulerCoSPriGreenCos5Priority | read-write | mandatory | Green CoS 5 priority. |
| 1.3.6.1.4.1.2281.10.8.6.2.3.1.14 | ColumngenEquipProfilesSchedulerCoSPriCos6description | read-write | mandatory | CoS 6 Description. |
| 1.3.6.1.4.1.2281.10.8.6.2.3.1.15 | ColumngenEquipProfilesSchedulerCoSPriGreenCos6Priority | read-write | mandatory | Green CoS 6 priority. |
| 1.3.6.1.4.1.2281.10.8.6.2.3.1.16 | ColumngenEquipProfilesSchedulerCoSPriCos7description | read-write | mandatory | CoS 7 Description. |
| 1.3.6.1.4.1.2281.10.8.6.2.3.1.17 | ColumngenEquipProfilesSchedulerCoSPriGreenCos7Priority | read-only | mandatory | Green CoS 7 priority. |
| 1.3.6.1.4.1.2281.10.8.6.2.3.1.30 | ColumngenEquipProfilesSchedulerCoSPriRowStatus | read-write | mandatory | Table Mib Row Status. |
| 1.3.6.1.4.1.2281.10.8.6.2.4 | TablegenEquipProfilesSchedulerWfqTable | not-accessible | mandatory | The table holds the Egress Scheduler Port WFQ profiles (each profile contain 8 weights per 8 queues of single port). |
| 1.3.6.1.4.1.2281.10.8.6.2.4.1 | RowgenEquipProfilesSchedulerWfqEntry | not-accessible | mandatory | The table entry holds the Egress Scheduler Port WFQ profiles (each profile contain 8 weights per 8 queues of single port). |
| 1.3.6.1.4.1.2281.10.8.6.2.4.1.1 | ColumngenEquipProfilesSchedulerWfqIndex | read-only | mandatory | WFQ Profile ID. |
| 1.3.6.1.4.1.2281.10.8.6.2.4.1.2 | ColumngenEquipProfilesSchedulerWfqCos0Weight | read-write | mandatory | CoS 0 Weight. |
| 1.3.6.1.4.1.2281.10.8.6.2.4.1.3 | ColumngenEquipProfilesSchedulerWfqCos1Weight | read-write | mandatory | CoS 1 Weight. |
| 1.3.6.1.4.1.2281.10.8.6.2.4.1.4 | ColumngenEquipProfilesSchedulerWfqCos2Weight | read-write | mandatory | CoS 2 Weight. |
| 1.3.6.1.4.1.2281.10.8.6.2.4.1.5 | ColumngenEquipProfilesSchedulerWfqCos3Weight | read-write | mandatory | CoS 3 Weight. |
| 1.3.6.1.4.1.2281.10.8.6.2.4.1.6 | ColumngenEquipProfilesSchedulerWfqCos4Weight | read-write | mandatory | CoS 4 Weight. |
| 1.3.6.1.4.1.2281.10.8.6.2.4.1.7 | ColumngenEquipProfilesSchedulerWfqCos5Weight | read-write | mandatory | Green CoS 2 priority. |
| 1.3.6.1.4.1.2281.10.8.6.2.4.1.8 | ColumngenEquipProfilesSchedulerWfqCos6Weight | read-write | mandatory | CoS 3 Description. |
| 1.3.6.1.4.1.2281.10.8.6.2.4.1.9 | ColumngenEquipProfilesSchedulerWfqCos7Weight | read-write | mandatory | CoS 7 Weight. |
| 1.3.6.1.4.1.2281.10.8.6.2.4.1.30 | ColumngenEquipProfilesSchedulerWfqRowStatus | read-write | mandatory | Table Mib Row Status. |
| 1.3.6.1.4.1.2281.10.8.6.2.5 | TablegenEquipProfilesL2ShaperTable | not-accessible | mandatory | The table holds the Egress Shaper profiles at port level. |
| 1.3.6.1.4.1.2281.10.8.6.2.5.1 | RowgenEquipProfilesL2ShaperEntry | not-accessible | mandatory | The table entry holds the Egress Shaper profiles at port level. |
| 1.3.6.1.4.1.2281.10.8.6.2.5.1.1 | ColumngenEquipProfilesL2ShaperIndex | read-only | mandatory | Shaper Profile ID. |
| 1.3.6.1.4.1.2281.10.8.6.2.5.1.2 | ColumngenEquipProfilesL2ShaperDescription | read-write | mandatory | Shaper Description. |
| 1.3.6.1.4.1.2281.10.8.6.2.5.1.3 | ColumngenEquipProfilesL2ShaperCir | read-write | mandatory | Committed Information Rate (in Bits). |
| 1.3.6.1.4.1.2281.10.8.6.2.5.1.4 | ColumngenEquipProfilesL2ShaperCbs | read-write | mandatory | Committed Burst Size (in Bytes). |
| 1.3.6.1.4.1.2281.10.8.6.2.5.1.5 | ColumngenEquipProfilesL2ShaperBurstType | read-write | mandatory | CBS burst type - short (minimal) size or long burst (recomanded for long RTT). |
| 1.3.6.1.4.1.2281.10.8.6.2.5.1.30 | ColumngenEquipProfilesL2ShaperRowStatus | read-write | mandatory | Table Mib Row Status. |
| 1.3.6.1.4.1.2281.10.8.6.2.6 | TablegenEquipProfilesL3ServiceShaperTable | not-accessible | mandatory | The table holds the Egress Shaper profiles at service level. |
| 1.3.6.1.4.1.2281.10.8.6.2.6.1 | RowgenEquipProfilesL3ServiceShaperEntry | not-accessible | mandatory | The table entry holds the Egress Shaper profiles at service level. |
| 1.3.6.1.4.1.2281.10.8.6.2.6.1.1 | ColumngenEquipProfilesL3ServiceShaperIndex | read-only | mandatory | Shaper Profile ID. |
| 1.3.6.1.4.1.2281.10.8.6.2.6.1.2 | ColumngenEquipProfilesL3ServiceShaperDescription | read-write | mandatory | Shaper Description. |
| 1.3.6.1.4.1.2281.10.8.6.2.6.1.3 | ColumngenEquipProfilesL3ServiceShaperCir | read-write | mandatory | Committed Information Rate (in Bits). |
| 1.3.6.1.4.1.2281.10.8.6.2.6.1.4 | ColumngenEquipProfilesL3ServiceShaperCbs | read-write | mandatory | Committed Burst Size (in Bytes). |
| 1.3.6.1.4.1.2281.10.8.6.2.6.1.5 | ColumngenEquipProfilesL3ServiceShaperPir | read-write | mandatory | Peak Information Rate (in Bits). |
| 1.3.6.1.4.1.2281.10.8.6.2.6.1.6 | ColumngenEquipProfilesL3ServiceShaperPbs | read-write | mandatory | Peak Burst size (in Bytes). |
| 1.3.6.1.4.1.2281.10.8.6.2.6.1.7 | ColumngenEquipProfilesL3ServiceShaperBurstType | read-write | mandatory | CBS and PBS burst type - short (minimal) size or long burst (recomanded for long RTT). |
| 1.3.6.1.4.1.2281.10.8.6.2.6.1.30 | ColumngenEquipProfilesL3ServiceShaperRowStatus | read-write | mandatory | Table Mib Row Status. |
| 1.3.6.1.4.1.2281.10.8.6.2.7 | TablegenEquipProfilesEgressL4QueueShaperTable | not-accessible | mandatory | The table holds the Egress Shaper profiles at Queue level. |
| 1.3.6.1.4.1.2281.10.8.6.2.7.1 | RowgenEquipProfilesEgressL4QueueShaperEntry | not-accessible | mandatory | The table entry holds the Egress Shaper profiles at Queue level. |
| 1.3.6.1.4.1.2281.10.8.6.2.7.1.1 | ColumngenEquipProfilesEgressL4QueueShaperIndex | read-only | mandatory | Shaper Profile ID. |
| 1.3.6.1.4.1.2281.10.8.6.2.7.1.2 | ColumngenEquipProfilesEgressL4QueueShaperDescription | read-write | mandatory | Shaper Description. |
| 1.3.6.1.4.1.2281.10.8.6.2.7.1.3 | ColumngenEquipProfilesEgressL4QueueShaperCir | read-write | mandatory | Committed Information Rate (in Bits). |
| 1.3.6.1.4.1.2281.10.8.6.2.7.1.4 | ColumngenEquipProfilesEgressL4QueueShaperCbs | read-write | mandatory | Committed Burst Size (in Bytes). |
| 1.3.6.1.4.1.2281.10.8.6.2.7.1.5 | ColumngenEquipProfilesEgressL4QueueShaperBurstType | read-write | mandatory | CBS burst type - short (minimal) size or long burst (recomanded for long RTT). |
| 1.3.6.1.4.1.2281.10.8.6.2.7.1.30 | ColumngenEquipProfilesEgressL4QueueShaperRowStatus | read-write | mandatory | Table Mib Row Status. |
| 1.3.6.1.4.1.2281.10.8.6.3 | NodegenEquipTmConfig | |||
| 1.3.6.1.4.1.2281.10.8.6.3.1 | TablegenEquipTmL4WredAssociationTable | not-accessible | mandatory | The table holds the user selelcted WRED profile for eac Egress Queue. |
| 1.3.6.1.4.1.2281.10.8.6.3.1.1 | RowgenEquipTmL4WredAssociationEntry | not-accessible | mandatory | The table entry holds the user selelcted WRED profile for eac Egress Queue. |
| 1.3.6.1.4.1.2281.10.8.6.3.1.1.1 | ColumngenEquipTmL4WredAssociationIfIndex | read-only | mandatory | Ethernet Logical port if-index table key. |
| 1.3.6.1.4.1.2281.10.8.6.3.1.1.2 | ColumngenEquipTmL4WredAssociationServiceIndex | read-only | mandatory | Service Bundle ID. |
| 1.3.6.1.4.1.2281.10.8.6.3.1.1.3 | ColumngenEquipTmL4WredAssociationCosQueueIndex | read-only | mandatory | CoS Queue ID. |
| 1.3.6.1.4.1.2281.10.8.6.3.1.1.4 | ColumngenEquipTmL4WredAssociationWredProfileId | read-write | mandatory | WRED Profile ID. |
| 1.3.6.1.4.1.2281.10.8.6.3.2 | TablegenEquipTmSchedulerCoSPriAssociationTable | not-accessible | mandatory | The table holds the user selected Scheduler Priority Profile for each Egress port. |
| 1.3.6.1.4.1.2281.10.8.6.3.2.1 | RowgenEquipTmSchedulerCoSPriAssociationEntry | not-accessible | mandatory | The table entry holds the user selected Scheduler Priority Profile for each Egress port. |
| 1.3.6.1.4.1.2281.10.8.6.3.2.1.1 | ColumngenEquipTmSchedulerCoSPriAssociationIfIndex | read-only | mandatory | Ethernet Logical port if-index table key. |
| 1.3.6.1.4.1.2281.10.8.6.3.2.1.2 | ColumngenEquipTmSchedulerCoSPriAssociationAssociatedProfileId | read-write | mandatory | Queue Scheduler Profile ID. |
| 1.3.6.1.4.1.2281.10.8.6.3.3 | TablegenEquipTmL3ServiceShaperAssociationTable | not-accessible | mandatory | The table holds the user selected Shapping profiles for each Service Bundle. |
| 1.3.6.1.4.1.2281.10.8.6.3.3.1 | RowgenEquipTmL3ServiceShaperAssociationEntry | not-accessible | mandatory | The table entry holds the user selected Shapping profiles for each Service Bundle. |
| 1.3.6.1.4.1.2281.10.8.6.3.3.1.1 | ColumngenEquipTmL3ServiceShaperAssociationIfIndex | read-only | mandatory | Ethernet Logical port if-index table key. |
| 1.3.6.1.4.1.2281.10.8.6.3.3.1.2 | ColumngenEquipTmL3ServiceShaperAssociationServiceClassIndex | read-only | mandatory | Service Bundle ID. |
| 1.3.6.1.4.1.2281.10.8.6.3.3.1.3 | ColumngenEquipTmL3ServiceShaperAssociationShaperProfileId | read-write | mandatory | Shaper Profile ID. |
| 1.3.6.1.4.1.2281.10.8.6.3.3.1.4 | ColumngenEquipTmL3ServiceShaperAssociationShaperAdmin | read-write | mandatory | Shaper Admin. |
| 1.3.6.1.4.1.2281.10.8.6.3.3.1.30 | ColumngenEquipTmL3ServiceShaperAssociationRowStatus | read-write | mandatory | Table Mib Row Status. |
| 1.3.6.1.4.1.2281.10.8.6.3.4 | TablegenEquipTmL2ShaperAssociationTable | not-accessible | mandatory | The table holds the user selected Shapping profiles for each Ethernet Port. |
| 1.3.6.1.4.1.2281.10.8.6.3.4.1 | RowgenEquipTmL2ShaperAssociationEntry | not-accessible | mandatory | The table entry holds the user selected Shapping profiles for each Ethernet Port. |
| 1.3.6.1.4.1.2281.10.8.6.3.4.1.1 | ColumngenEquipTmL2ShaperAssociationIfIndex | read-only | mandatory | Ethernet Logical port if-index table key. |
| 1.3.6.1.4.1.2281.10.8.6.3.4.1.2 | ColumngenEquipTmL2ShaperAssociationProfileId | read-write | mandatory | Port Shaper Profile ID. |
| 1.3.6.1.4.1.2281.10.8.6.3.4.1.3 | ColumngenEquipTmL2ShaperAssociationAdmin | read-write | mandatory | Port Shaper Admin. |
| 1.3.6.1.4.1.2281.10.8.6.3.4.1.30 | ColumngenEquipTmL2ShaperAssociationRowStatus | read-write | mandatory | Table Mib Row Status. |
| 1.3.6.1.4.1.2281.10.8.6.3.5 | TablegenEquipTmL4QueueShaperAssociationTable | not-accessible | mandatory | The table holds the user selected Shapping profiles for each Ethernet PortThe table holds the user selected Shapping profiles for each transmitting Queue. |
| 1.3.6.1.4.1.2281.10.8.6.3.5.1 | RowgenEquipTmL4QueueShaperAssociationEntry | not-accessible | mandatory | The table entry holds the user selected Shapping profiles for each transmitting Queue. |
| 1.3.6.1.4.1.2281.10.8.6.3.5.1.1 | ColumngenEquipTmL4QueueShaperAssociationIfIndex | read-only | mandatory | Ethernet Logical port if-index table key. |
| 1.3.6.1.4.1.2281.10.8.6.3.5.1.2 | ColumngenEquipTmL4QueueShaperAssociationServiceIndex | read-only | mandatory | Service Bundle ID. |
| 1.3.6.1.4.1.2281.10.8.6.3.5.1.3 | ColumngenEquipTmL4QueueShaperAssociationCosQueueIndex | read-only | mandatory | CoS Queue ID. |
| 1.3.6.1.4.1.2281.10.8.6.3.5.1.4 | ColumngenEquipTmL4QueueShaperAssociationShaperProfileId | read-write | mandatory | Queue Shaper Profile ID. |
| 1.3.6.1.4.1.2281.10.8.6.3.5.1.5 | ColumngenEquipTmL4QueueShaperAssociationShaperProfileAdmin | read-write | mandatory | Queue Shaper Admin. |
| 1.3.6.1.4.1.2281.10.8.6.3.5.1.30 | ColumngenEquipTmL4QueueShaperAssociationRowStatus | read-write | mandatory | Table Mib Row Status. |
| 1.3.6.1.4.1.2281.10.8.6.3.6 | TablegenEquipTmSchedulerWfqAssociationTable | not-accessible | mandatory | The table holds the user selected Scheduler WFQ weights Profile for each Egress port. |
| 1.3.6.1.4.1.2281.10.8.6.3.6.1 | RowgenEquipTmSchedulerWfqAssociationEntry | not-accessible | mandatory | The table entry holds the user selected Scheduler WFQ weights Profile for each Egress port. |
| 1.3.6.1.4.1.2281.10.8.6.3.6.1.1 | ColumngenEquipTmSchedulerWfqAssociationIfIndex | read-only | mandatory | Ethernet Logical port if-index table key. |
| 1.3.6.1.4.1.2281.10.8.6.3.6.1.2 | ColumngenEquipTmSchedulerWfqAssociationProfileId | read-write | mandatory | WFQ Scheduler Profile ID |
| 1.3.6.1.4.1.2281.10.9 | NodegenEquipInterfaces | |||
| 1.3.6.1.4.1.2281.10.9.1 | NodegenEquipInterfacesEther | |||
| 1.3.6.1.4.1.2281.10.9.1.1 | TablegenEquipInterfacesEtherTable | not-accessible | mandatory | Ethernet interface configuration and status table. The index of the table is via ifIndex, as well as the operational status and the admin state, speed and port… |
| 1.3.6.1.4.1.2281.10.9.1.1.1 | RowgenEquipInterfacesEtherEntry | not-accessible | mandatory | Ethernet interface configuration and status table. The index of the table is via ifIndex, as well as the operational status and the admin state, speed and port… |
| 1.3.6.1.4.1.2281.10.9.1.1.1.1 | ColumngenEquipInterfacesEtherConnType | read-write | mandatory | The physical interface type. For port 8 the only valid value is radio. For ports 3 to 7 the only valid value is rj45. |
| 1.3.6.1.4.1.2281.10.9.1.1.1.2 | ColumngenEquipInterfacesEtherPortType | read-write | mandatory | The type of the port. Access - untagged port (in case of managed switch). Trunk - C-VID tagged port (in case of managed switch). CN - Don't care on the vlan ta… |
| 1.3.6.1.4.1.2281.10.9.1.1.1.3 | ColumngenEquipInterfacesEtherAutoNegotiation | read-write | mandatory | Enable or disable auto-negotiation on the port. |
| 1.3.6.1.4.1.2281.10.9.1.1.1.4 | ColumngenEquipInterfacesEtherDuplex | read-write | mandatory | Half or full duplex. |
| 1.3.6.1.4.1.2281.10.9.1.1.1.5 | ColumngenEquipInterfacesEtherRate | read-write | mandatory | 10, 100 OR 1000 Mbps. |
| 1.3.6.1.4.1.2281.10.9.1.1.1.6 | ColumngenEquipInterfacesEtherPortLerningAdmin | read-write | mandatory | Enable or disable MAC address learning in the port. |
| 1.3.6.1.4.1.2281.10.9.1.1.1.7 | ColumngenEquipInterfacesEtherFlowCtrl | read-write | mandatory | Enable or disable flow control on the port. Supported only in pipe mode. |
| 1.3.6.1.4.1.2281.10.9.1.1.1.8 | ColumngenEquipInterfacesEtherLagPortMember | read-write | mandatory | The syntax is ifIndex, or FFFF for port that is not member in a lag. |
| 1.3.6.1.4.1.2281.10.9.1.1.1.9 | ColumngenEquipInterfacesEtherActualDuplex | read-only | mandatory | Actual duplex (in auto-negotiation, the mode the two ports agreed upon) - Half or full duplex. |
| 1.3.6.1.4.1.2281.10.9.1.1.1.10 | ColumngenEquipInterfacesEtherActualRate | read-only | mandatory | Actual rate (in auto-negotiation, the rate the two ports agreed upon) - 10, 100 OR 1000 Mbps. |
| 1.3.6.1.4.1.2281.10.9.1.1.1.11 | ColumngenEquipInterfacesEtherClkSrc | read-write | mandatory | The source for the outgoing carrier signal clock. Local-clock is an internal independent oscilator. system-clock-source causes the ethernet clock to be derived… |
| 1.3.6.1.4.1.2281.10.9.1.1.1.12 | ColumngenEquipInterfacesEtherPortServiceType | read-write | mandatory | This parameter indicates whether the port is being used as a Service Access Point (SAP) or as a Service Network Point (SNP) in a network-wide Ethernet service;… |
| 1.3.6.1.4.1.2281.10.9.1.1.1.13 | ColumngenEquipInterfacesEtheMACAddress | read-only | mandatory | The MAC address of the port for CFM or PWE3 addressing purposes. |
| 1.3.6.1.4.1.2281.10.9.1.1.1.14 | ColumngenEquipInterfacesEtherDefaultVLANId | read-write | mandatory | Default VLAN ID of the Ethernet interface. |
| 1.3.6.1.4.1.2281.10.9.1.1.1.15 | ColumngenEquipInterfacesEtherPortBlockSharedVlans | read-write | mandatory | When enabled, this parameter blocks transfer of Ethernet frames to/from other ports for which it is enabled, effectively eliminating all shared VLANs. |
| 1.3.6.1.4.1.2281.10.9.1.2 | ScalargenEquipInterfacesEtherStatePropagation | read-write | mandatory | This parameter configures the behavior of Ethernet ports in single pipe mode. When a failure is detected, ports will be automatically shut down when the config… |
| 1.3.6.1.4.1.2281.10.9.1.3 | ScalargenEquipInterfacesEtherPWPort | read-write | mandatory | The port in the traffic bridge connected to the PWE3 T-card. |
| 1.3.6.1.4.1.2281.10.9.2 | NodegenEquipInterfacesE1T1 | |||
| 1.3.6.1.4.1.2281.10.9.2.1 | TablegenEquipInterfacesE1T1PortGroupTable | not-accessible | mandatory | General parameters for group of E1 or T1 interfaces. |
| 1.3.6.1.4.1.2281.10.9.2.1.1 | RowgenEquipInterfacesE1T1PortGroupEntry | not-accessible | mandatory | General parameters for group of E1 or T1 interfaces. |
| 1.3.6.1.4.1.2281.10.9.2.1.1.1 | ColumngenEquipInterfacesE1T1PortGroupId | read-only | mandatory | Group id. the index of this table. |
| 1.3.6.1.4.1.2281.10.9.2.1.1.2 | ColumngenEquipInterfacesE1T1PortGroupLineCode | read-write | mandatory | The PDH line coding. b8zs is for T1 and hdb3 for E1. ami is only for T1. This parameter is relevant only for versions up to 6.6.0.0.1.53 (including). |
| 1.3.6.1.4.1.2281.10.9.2.1.1.3 | ColumngenEquipInterfacesE1T1PortGroupExcessiveBERthreshold | read-write | mandatory | Excessive BER threshold for the group of E1s/T1s. |
| 1.3.6.1.4.1.2281.10.9.2.1.1.4 | ColumngenEquipInterfacesE1T1PortGroupSignalDegradeThreshold | read-write | mandatory | Signal degrade threshold for the group of E1s/T1s. |
| 1.3.6.1.4.1.2281.10.9.2.1.1.5 | ColumngenEquipInterfacesE1T1PortGroupLineCode1to8 | read-write | mandatory | The PDH line coding for line interfaces 1 to 8. b8zs is for T1 and hdb3 for E1. ami is only for T1. |
| 1.3.6.1.4.1.2281.10.9.2.1.1.6 | ColumngenEquipInterfacesE1T1PortGroupLineCode9to16 | read-write | mandatory | The PDH line coding for line interfaces 9 to 16. b8zs is for T1 and hdb3 for E1. ami is only for T1. |
| 1.3.6.1.4.1.2281.10.9.2.1.1.7 | ColumngenEquipInterfacesE1T1PortGroupLineCode17to24 | read-write | mandatory | The PDH line coding for line interfaces 17 to 24. b8zs is for T1 and hdb3 for E1. ami is only for T1. |
| 1.3.6.1.4.1.2281.10.9.2.1.1.8 | ColumngenEquipInterfacesE1T1PortGroupLineCode25to32 | read-write | mandatory | The PDH line coding for interfaces 25 to 32. b8zs is for T1 and hdb3 for E1. ami is only for T1. |
| 1.3.6.1.4.1.2281.10.9.2.2 | TablegenEquipInterfacesE1T1Table | not-accessible | mandatory | E1/T1 interface configuration table. |
| 1.3.6.1.4.1.2281.10.9.2.2.1 | RowgenEquipInterfacesE1T1Entry | not-accessible | mandatory | E1/T1 interface configuration table. |
| 1.3.6.1.4.1.2281.10.9.2.2.1.1 | ColumngenEquipInterfacesE1T1Priority | read-only | mandatory | The ACM priority of the E1/T1. This parameter is relevant only for stand-alone mode. In shelf this parameter is defined in the trail configuration. |
| 1.3.6.1.4.1.2281.10.9.2.2.1.2 | ColumngenEquipInterfacesE1T1CurrBER | read-only | mandatory | E1/T1 current BER. |
| 1.3.6.1.4.1.2281.10.9.2.2.1.3 | ColumngenEquipInterfacesE1T1Loopback | read-write | mandatory | Enable or Disable line loopback on the E1/T1 interface. |
| 1.3.6.1.4.1.2281.10.9.2.2.1.4 | ColumngenEquipInterfacesE1T1AISSStatus | read-only | mandatory | Status of the AIS detection, if the AIS detection is activated. |
| 1.3.6.1.4.1.2281.10.9.2.2.1.5 | ColumngenEquipInterfacesE1T1CableLength | read-write | mandatory | This parameter is valid only for T1 interfaces, and determines cable length range. |
| 1.3.6.1.4.1.2281.10.9.3 | NodegenEquipInterfacesAux | |||
| 1.3.6.1.4.1.2281.10.9.3.1 | NodegenEquipInterfacesAuxWaySide | |||
| 1.3.6.1.4.1.2281.10.9.3.1.1 | TablegenEquipInterfacesAuxWaySideTable | not-accessible | mandatory | Way-side interface configuration. |
| 1.3.6.1.4.1.2281.10.9.3.1.1.1 | RowgenEquipInterfacesAuxWaySideEntry | not-accessible | mandatory | Way-side interface configuration. |
| 1.3.6.1.4.1.2281.10.9.3.1.1.1.1 | ColumngenEquipInterfacesAuxWaySideAdmin | read-write | mandatory | Enable - Set Ethernet port #4 to be a wayside port. Disabling this option will cause the port to behave as a normal traffic Ethernet port. |
| 1.3.6.1.4.1.2281.10.9.3.1.1.1.2 | ColumngenEquipInterfacesAuxWaySideCapacity | read-write | mandatory | Narrow band (64Kbps) or Wide band (2Mbps) |
| 1.3.6.1.4.1.2281.10.9.3.1.1.1.3 | ColumngenEquipInterfacesAuxWaySideAutoNegotiation | read-write | mandatory | Wayside port auto negotiation (Off, on) |
| 1.3.6.1.4.1.2281.10.9.3.1.1.1.4 | ColumngenEquipInterfacesAuxWaySideDuplex | read-write | mandatory | Wayside port duplex (Half, Full) |
| 1.3.6.1.4.1.2281.10.9.3.1.1.1.5 | ColumngenEquipInterfacesAuxWaySideRate | read-write | mandatory | Wayside interface port rate (10Mbps,100Mbps) |
| 1.3.6.1.4.1.2281.10.9.3.2 | TablegenEquipInterfacesAuxUserChanTable | not-accessible | mandatory | Table of configured user channels. |
| 1.3.6.1.4.1.2281.10.9.3.2.1 | RowgenEquipInterfacesAuxUserChanEntry | not-accessible | mandatory | Table of configured user channels. |
| 1.3.6.1.4.1.2281.10.9.3.2.1.1 | ColumngenEquipInterfacesAuxUserChanType | read-write | mandatory | User channel type. The asynchronous modes allow two channels, one in each port. The twin asynchronous mode uses port 1 for v.11 and port 2 for RS-232. The Sync… |
| 1.3.6.1.4.1.2281.10.9.4 | NodegenEquipInterfacesSdh | |||
| 1.3.6.1.4.1.2281.10.9.4.1 | TablegenEquipInterfacesSdhTable | not-accessible | mandatory | STM-1,OC-3 interface configuration and status table. |
| 1.3.6.1.4.1.2281.10.9.4.1.1 | RowgenEquipInterfacesSdhEntry | not-accessible | mandatory | STM-1,OC-3 interface configuration and status table. |
| 1.3.6.1.4.1.2281.10.9.4.1.1.1 | ColumngenEquipInterfacesSdhMuteTx | read-write | mandatory | Mute Tx option on the interface. |
| 1.3.6.1.4.1.2281.10.9.4.1.1.2 | ColumngenEquipInterfacesSdhClockSource | read-write | mandatory | The source of the clock being used. sync-vc option is for future support, to use one of the outgoing TDM VCs as a source. |
| 1.3.6.1.4.1.2281.10.9.4.1.1.3 | ColumngenEquipInterfacesSdhAISAdmin | read-write | mandatory | Enable, Disable AIS signaling at the V5 byte on the STM-1, OC-3 interface. |
| 1.3.6.1.4.1.2281.10.9.4.1.1.4 | ColumngenEquipInterfacesSdhTraceIdReceived | read-only | mandatory | J0 Trace Identifier signal that was received on the interface. |
| 1.3.6.1.4.1.2281.10.9.4.1.1.5 | ColumngenEquipInterfacesSdhTraceIdTransmitted | read-write | mandatory | J0 Trace Identifier signal that is transmitted on the interface. |
| 1.3.6.1.4.1.2281.10.9.4.1.1.6 | ColumngenEquipInterfacesSdhTraceIdExpected | read-write | mandatory | J0 Trace Identifier signal that is expected to be received on the interface. |
| 1.3.6.1.4.1.2281.10.9.4.1.1.7 | ColumngenEquipInterfacesSdhTraceIdStringLength | read-write | mandatory | Trace identifier string length. Lengths 0 and 15 are valid for SDH systems. Length 62 is additionally available in SONET systems. |
| 1.3.6.1.4.1.2281.10.9.4.1.1.8 | ColumngenEquipInterfacesSdhExcessiveBer | read-write | mandatory | Excessive BER threshold on the interface. |
| 1.3.6.1.4.1.2281.10.9.4.1.1.9 | ColumngenEquipInterfacesSdhSignalDegrade | read-write | mandatory | Signal degrade threshold on the interface. |
| 1.3.6.1.4.1.2281.10.9.4.1.1.10 | ColumngenEquipInterfacesSdhLoopback | read-write | mandatory | SDH Loopback. |
| 1.3.6.1.4.1.2281.10.9.4.1.1.11 | ColumngenEquipInterfacesSdhClockSourceStatus | read-only | mandatory | The actual source of the clock for the outgoing STM-1/OC-3 signal. It may differ from the desired source if the source signal is missing or corrupt |
| 1.3.6.1.4.1.2281.10.9.4.1.1.12 | ColumngenEquipInterfacesSdhLineTxProtectionMode | read-write | mandatory | this parameter configures the behavior of the transmitting line in a 1+1 HSB configuration. In normal mode the stand-by signal is silenced. In uni-directional … |
| 1.3.6.1.4.1.2281.10.9.4.1.1.13 | ColumngenEquipInterfacesSdhSyncVC | read-write | mandatory | The outgoing VC signal to be taken as the STM-1/OC-3 synchronization source if genEquipInterfacesSdhClockSource is set to synchronization-vc |
| 1.3.6.1.4.1.2281.10.9.4.1.1.14 | ColumngenEquipInterfacesSdhAdmin | read-write | mandatory | Administrative status of the STM-1/OC3 port |
| 1.3.6.1.4.1.2281.10.9.4.1.1.15 | ColumngenEquipInterfacesSdhPdhTimingMode | read-write | mandatory | Clock reference for outgoing PDH signals configured in 'absolute clock' mode |
| 1.3.6.1.4.1.2281.10.9.4.1.1.16 | ColumngenEquipInterfacesSdhSlot | read-only | mandatory | Slot ID |
| 1.3.6.1.4.1.2281.10.9.4.1.1.17 | ColumngenEquipInterfacesSdhIdleCode | read-write | mandatory | Value to be transmitted at PDH signals inside the STM-1/OC3 when there is no data to transmit |
| 1.3.6.1.4.1.2281.10.9.4.1.1.18 | ColumngenEquipInterfacesSdhSSMAdmin | read-write | mandatory | SSM support admin for this interface |
| 1.3.6.1.4.1.2281.10.9.4.1.1.19 | ColumngenEquipInterfacesSdhSSMPattern | read-write | mandatory | Indicates the default SSM pattern to be transmitted in case if TCC clock synchronization subsystem doesn't provide SSM pattern value |
| 1.3.6.1.4.1.2281.10.9.4.1.1.20 | ColumngenEquipInterfacesSdhTraceIdAdmin | read-write | mandatory | Enable/disable of J0 mismatch checking on RX direction |
| 1.3.6.1.4.1.2281.10.9.4.1.1.21 | ColumngenEquipInterfacesSdhVCSignalLabel | read-write | mandatory | Sets the signal label bits to be sent and expected in every VC-11/12; use non-specific payload only for backwards compatibility with old equipment |
| 1.3.6.1.4.1.2281.10.9.4.1.1.22 | ColumngenEquipInterfacesSdhVcRdiAdmin | read-write | mandatory | VC-RDI signaling admin status |
| 1.3.6.1.4.1.2281.10.9.4.2 | TablegenEquipInterfacesSdhLpVcTable | not-accessible | mandatory | This table includes properties for each Low-order path VC (VC-11/12) in the SDH interface. |
| 1.3.6.1.4.1.2281.10.9.4.2.1 | RowgenEquipInterfacesSdhLpVcEntry | not-accessible | mandatory | This table includes properties for each Low-order path VC (VC-11/12) in the SDH interface. |
| 1.3.6.1.4.1.2281.10.9.4.2.1.1 | ColumngenEquipInterfacesSdhLpVcId | read-only | mandatory | VC-11 or VC-12 number; VCs are numbered according to standard KLM order. |
| 1.3.6.1.4.1.2281.10.9.4.2.1.2 | ColumngenEquipInterfacesSdhLpVcAIS | read-only | mandatory | Indicates whether incoming AIS is currently detected in the VC's payload. 0 indicates that AIS is detected, 1 that is not detected. |
| 1.3.6.1.4.1.2281.10.9.4.3 | TablegenEquipInterfacesSdhStatusTable | not-accessible | mandatory | SDH Status. |
| 1.3.6.1.4.1.2281.10.9.4.3.1 | RowgenEquipInterfacesSdhStatusEntry | not-accessible | mandatory | SDH Status |
| 1.3.6.1.4.1.2281.10.9.4.3.1.1 | ColumngenEquipInterfacesSdhStatusIfIndex | read-only | mandatory | Portnumber |
| 1.3.6.1.4.1.2281.10.9.4.3.1.2 | ColumngenEquipInterfacesSdhStatusLine | read-only | mandatory | Bitmap field according to the following values: no-defect (1), AIS (2), RDI (4) |
| 1.3.6.1.4.1.2281.10.9.4.3.1.3 | ColumngenEquipInterfacesSdhStatusOperState | read-only | mandatory | Interface operational status |
| 1.3.6.1.4.1.2281.10.9.4.3.1.4 | ColumngenEquipInterfacesSdhStatusRegenerator | read-only | mandatory | Bitmap field according to the following values: no-defect (1), AIS (2), RDI (4) |
| 1.3.6.1.4.1.2281.10.9.4.3.1.5 | ColumngenEquipInterfacesSdhStatusClockSourceStatus | read-only | mandatory | The actual source of the clock for the outgoing STM-1/OC-3 signal. It may differ from the desired source if the source signal is missing or corrupt |
| 1.3.6.1.4.1.2281.10.9.4.3.1.6 | ColumngenEquipInterfacesSdhStatusPdhClockStatus | read-only | mandatory | PDH clock source status |
| 1.3.6.1.4.1.2281.10.9.4.3.1.7 | ColumngenEquipInterfacesSdhStatusSlotId | read-only | mandatory | Slot ID |
| 1.3.6.1.4.1.2281.10.9.4.3.1.8 | ColumngenEquipInterfacesSdhStatusLoopback | read-only | mandatory | The current state of the loopback for the SONET/SDH interface |
| 1.3.6.1.4.1.2281.10.9.4.3.1.9 | ColumngenEquipInterfacesSdhStatusMultiplexer | read-only | mandatory | Bitmask: no-defect (1), STS-LOP(2), STS-AIS(4), STS-RDI(8), unequipped (16), label-mismatch (32) |
| 1.3.6.1.4.1.2281.10.9.4.3.1.10 | ColumngenEquipInterfacesSdhStatusSsmRx | read-only | mandatory | Indicates the currently received SSM bits |
| 1.3.6.1.4.1.2281.10.9.4.3.1.11 | ColumngenEquipInterfacesSdhStatusSsmTx | read-only | mandatory | Indicates the currently transmitted SSM bits |
| 1.3.6.1.4.1.2281.10.9.4.4 | TablegenEquipInterfacesSdhLoopbackStatusTable | not-accessible | mandatory | SONET/SDH interface loopback status |
| 1.3.6.1.4.1.2281.10.9.4.4.1 | RowgenEquipInterfacesSdhLoopbackStatusEntry | not-accessible | mandatory | SONET/SDH interface loopback status entry |
| 1.3.6.1.4.1.2281.10.9.4.4.1.1 | ColumngenEquipInterfacesSdhLoopbackStatusIfIndex | read-only | mandatory | Portnumber |
| 1.3.6.1.4.1.2281.10.9.4.4.1.2 | ColumngenEquipInterfacesSdhLoopbackStatusSlotId | read-only | mandatory | Slot ID |
| 1.3.6.1.4.1.2281.10.9.4.4.1.3 | ColumngenEquipInterfacesSdhLoopbackStatusType | read-write | mandatory | Interface operational status |
| 1.3.6.1.4.1.2281.10.9.4.4.1.4 | ColumngenEquipInterfacesSdhLoopbackStatusCounter | read-only | mandatory | Current value of STM1/OC3 interface Looback Timeout Counter |
| 1.3.6.1.4.1.2281.10.9.5 | NodegenEquipInterfacesAIS | |||
| 1.3.6.1.4.1.2281.10.9.5.1 | ScalargenEquipInterfacesAISAdmin | read-write | mandatory | Control AIS Detection over all E1/T1/SDH ports. |
| 1.3.6.1.4.1.2281.10.9.6 | NodegenEquipInterfacesASP | |||
| 1.3.6.1.4.1.2281.10.9.6.1 | ScalargenEquipInterfacesASPAdmin | read-write | mandatory | Controls the Automatic State Propagation |
| 1.3.6.1.4.1.2281.10.9.6.2 | ScalargenEquipInterfacesASPLocalLOC | read-write | mandatory | Enables fault propagation upon detection of local LOC. This configuration is relevant only for non-protected single-pipe switch mode only. |
| 1.3.6.1.4.1.2281.10.9.6.3 | ScalargenEquipInterfacesASPLocalExcessiveBER | read-write | mandatory | Enables fault propagation to the Ethernet interface upon detection of radio excessive BER. This configuration is relevant only for non-protected single-pipe sw… |
| 1.3.6.1.4.1.2281.10.9.6.4 | ScalargenEquipInterfacesASPACMthreshold | read-write | mandatory | Enable or disable the propagation when Radio ACM profile degrades below a defined profile. This configuration is relevant only for non-protected single-pipe sw… |
| 1.3.6.1.4.1.2281.10.9.6.5 | ScalargenEquipInterfacesASPRemoteFault | read-write | mandatory | This parameter enables/disables automatic state propagation. The following remote faults are propagated to the NE by default: - Radio LOF - Radio link ID misma… |
| 1.3.6.1.4.1.2281.10.9.6.7 | NodegenEquipInterfacesNGASP | |||
| 1.3.6.1.4.1.2281.10.9.6.7.1 | TablegenEquipInterfacesNGASPConfigTable | not-accessible | mandatory | This table configures automatic state propagation functionality. |
| 1.3.6.1.4.1.2281.10.9.6.7.1.1 | RowgenEquipInterfacesNGASPConfigEntry | not-accessible | mandatory | This table configures automatic state propagation functionality entry. |
| 1.3.6.1.4.1.2281.10.9.6.7.1.1.1 | ColumngenEquipInterfacesNGASPConfigControlledInterfaceIfindex | read-only | mandatory | Index of the controlled interface. This interface will be disabled upon initiation of auto state propagation |
| 1.3.6.1.4.1.2281.10.9.6.7.1.1.2 | ColumngenEquipInterfacesNGASPConfigAdmin | read-write | mandatory | Enables/disables automatic state propagation. |
| 1.3.6.1.4.1.2281.10.9.6.7.1.1.3 | ColumngenEquipInterfacesNGASPConfigMonitoredInterfaceIfindex | read-write | mandatory | Index to the monitored interface. Auto state propagation will act upon detecting a failure indication on this interface. |
| 1.3.6.1.4.1.2281.10.9.6.7.1.1.4 | ColumngenEquipInterfacesNGASPConfigAcmThreshold | read-write | mandatory | ACM profile threshold for initiating auto state propagation. |
| 1.3.6.1.4.1.2281.10.9.6.7.1.1.5 | ColumngenEquipInterfacesNGASPConfigRadioExcessiveBerCriterionAdmin | read-write | mandatory | Initiate auto state propagation upon local radio excessive BER. |
| 1.3.6.1.4.1.2281.10.9.6.7.1.1.6 | ColumngenEquipInterfacesNGASPConfigLinkIdMismatchCriterionAdmin | read-write | mandatory | Initiate auto state propagation upon local radio link Id mismatch. |
| 1.3.6.1.4.1.2281.10.9.6.7.1.1.7 | ColumngenEquipInterfacesNGASPConfigRadioLofCriterionAdmin | read-write | mandatory | Initiate auto state propagation upon local radio LOF. |
| 1.3.6.1.4.1.2281.10.9.6.7.1.1.8 | ColumngenEquipInterfacesNGASPConfigRemoteRadioLofCriterionAdmin | read-write | mandatory | Initiate auto state propagation upon remote radio LOF. |
| 1.3.6.1.4.1.2281.10.9.6.7.1.1.9 | ColumngenEquipInterfacesNGASPConfigRxAcmThresholdCriterionAdmin | read-write | mandatory | Initiate auto state propagation upon radio ACM RX profile below threshold. |
| 1.3.6.1.4.1.2281.10.9.6.7.1.1.10 | ColumngenEquipInterfacesNGASPConfigTxAcmThresholdCriterionAdmin | read-write | mandatory | Initiate auto state propagation upon radio ACM TX profile below threshold. |
| 1.3.6.1.4.1.2281.10.9.6.7.1.1.11 | ColumngenEquipInterfacesNGASPConfigRemoteEthLocCriterionAdmin | read-write | mandatory | Initiate auto state propagation due to remote ethernet LOC. |
| 1.3.6.1.4.1.2281.10.9.6.7.1.1.12 | ColumngenEquipInterfacesNGASPConfigRemoteFaultTriggerAdmin | read-write | mandatory | Auto state propagation trigger by remote fault. |
| 1.3.6.1.4.1.2281.10.9.6.7.1.1.13 | ColumngenEquipInterfacesNGASPConfigRemoteRadioExcessiveBerCriterionAdmin | read-write | mandatory | Initiate auto state propagation upon remote radio excessive BER. |
| 1.3.6.1.4.1.2281.10.9.6.7.1.1.14 | ColumngenEquipInterfacesNGASPConfigMonitoredInterface56 | read-write | mandatory | Index to the monitored interface. Auto state propagation will act upon detecting a failure indication on this interface. |
| 1.3.6.1.4.1.2281.10.9.6.7.1.1.15 | ColumngenEquipInterfacesNGASPConfigCsfModeAdmin | read-write | mandatory | This mode upon failure sends CSF OAM packet instead of shuting down port. |
| 1.3.6.1.4.1.2281.10.9.6.7.1.1.16 | ColumngenEquipInterfacesNGASPConfigMonitoredInterface | read-write | mandatory | Index to the monitored interface. Auto state propagation will act upon detecting a failure indication on this interface. |
| 1.3.6.1.4.1.2281.10.9.6.7.1.1.17 | ColumngenEquipInterfacesNGASPConfigDelayTime | read-write | mandatory | Debounce time for ASP (in milliseconds) |
| 1.3.6.1.4.1.2281.10.9.6.7.1.1.30 | ColumngenEquipInterfacesNGASPConfigRowStatus | read-write | mandatory | Row status to allow user add entries dynamically. |
| 1.3.6.1.4.1.2281.10.9.7 | NodegenEquipInterfacesPW | |||
| 1.3.6.1.4.1.2281.10.9.7.1 | TablegenEquipInterfacesPWCardTable | not-accessible | mandatory | PW-Card configuration table. using the table to configure the system PW-T features. |
| 1.3.6.1.4.1.2281.10.9.7.1.1 | RowgenEquipInterfacesPWCardEntry | not-accessible | mandatory | PW-Card configuration table. using the table to configure the system PW-T features. |
| 1.3.6.1.4.1.2281.10.9.7.1.1.1 | ColumngenEquipInterfacesPWCardSlotNumber | read-write | mandatory | Slot number where the relevant PW card is inserted. |
| 1.3.6.1.4.1.2281.10.9.7.1.1.2 | ColumngenEquipInterfacesPWCardExportClkSysRef | read-write | mandatory | Which card clock to provide as source towards system reference clock; FrontPanel takes the clock inserted into the front panel interface; ClockRecovery takes t… |
| 1.3.6.1.4.1.2281.10.9.7.1.1.3 | ColumngenEquipInterfacesPWCardExportClkFrontPannel | read-only | mandatory | Which clock to export to the front panel clock; SysRefClk exports the system reference clock; ClockRecovery exports the clock recovered from the PW service map… |
| 1.3.6.1.4.1.2281.10.9.7.1.1.4 | ColumngenEquipInterfacesPWCardExportClkSysRefCrPort | read-write | mandatory | TDM port serving as clock recovery reference if ExportClkSysRef is set to ClockRecovery. |
| 1.3.6.1.4.1.2281.10.9.7.1.1.5 | ColumngenEquipInterfacesPWCardExportClkFrontPanelCrPort | read-write | mandatory | TDM port serving as clock recovery reference if ExportClkFrontPannel is set to ClockRecovery. |
| 1.3.6.1.4.1.2281.10.9.7.1.1.6 | ColumngenEquipInterfacesPWCardFrontPanelClockSignalInput | read-write | mandatory | Configure the type of input clock signal of the front panel port. Sync is 2.048MHz/1.544MHz (differential sine/square 3.3V); e1t1 is a G.823/G.824 signal. |
| 1.3.6.1.4.1.2281.10.9.7.1.1.7 | ColumngenEquipInterfacesPWCardFrontPanelClockSignalOutp | read-write | mandatory | Configure the type of output clock signal of the front panel port. Sync is 2.048MHz/1.544MHz (differential sine/square 3.3V); e1t1 is a G.823/G.824 signal. |
| 1.3.6.1.4.1.2281.10.9.7.1.1.8 | ColumngenEquipInterfacesPWCardIpAddrUdpIpTraffic | read-write | mandatory | IP Address for UDP/IP encapsulated PWs. |
| 1.3.6.1.4.1.2281.10.9.7.1.1.9 | ColumngenEquipInterfacesPWCardIpSubnetUdpIpTraffic | read-write | mandatory | IP Subnet for UDP/IP encapsulated PWs. |
| 1.3.6.1.4.1.2281.10.9.7.1.1.10 | ColumngenEquipInterfacesPWCardClkRecoveryMode | read-write | mandatory | Clock recovery mode for the card. |
| 1.3.6.1.4.1.2281.10.9.7.1.1.11 | ColumngenEquipInterfacesPWCardDifferentialClkFrequency | read-write | mandatory | Frequency for differential clock (none for adaptive). |
| 1.3.6.1.4.1.2281.10.9.7.1.1.12 | ColumngenEquipInterfacesPWCardDifferentialClkSource | read-write | mandatory | Reference clock source for differential clock recovery (none for adaptive). |
| 1.3.6.1.4.1.2281.10.9.7.2 | TablegenEquipInterfacesServicesPWTDMPortsTable | not-accessible | mandatory | This table allows configuration of the 16 internal E1/DS1 ports. |
| 1.3.6.1.4.1.2281.10.9.7.2.1 | RowgenEquipInterfacesServicesPWTDMPortsEntry | not-accessible | mandatory | This table allows configuration of the 16 internal E1/DS1 ports. |
| 1.3.6.1.4.1.2281.10.9.7.2.1.1 | ColumngenEquipInterfacesServicesPWTDMPortsLineType | read-write | mandatory | Line type of this TDM port. E1 types are for E1 systems and DS1 types for DS1 systems. |
| 1.3.6.1.4.1.2281.10.9.7.2.1.2 | ColumngenEquipInterfacesServicesPWTDMPortsLineCoding | read-write | mandatory | Line coding for this port. The value hdb3-b8zs means b8zs for T1 and hdb3 for E1. Ami is only for T1. |
| 1.3.6.1.4.1.2281.10.9.7.2.1.3 | ColumngenEquipInterfacesServicesPWTDMPortsAssigned | read-only | mandatory | Indication whether this port is currently assigned to a TDM trail. |
| 1.3.6.1.4.1.2281.10.9.7.2.1.4 | ColumngenEquipInterfacesServicesPWTDMPortsChannelization | read-write | mandatory | TIndication whether this TDM port is channelized into DS0s. |
| 1.3.6.1.4.1.2281.10.9.7.2.1.5 | ColumngenEquipInterfacesServicesPWTDMPortsTimingMode | read-write | mandatory | Transmission towards TDM timing mode. Loop means transmitting with the received clock from TDM signal. Absolute means transmitting with the clock selected by C… |
| 1.3.6.1.4.1.2281.10.9.7.2.1.6 | ColumngenEquipInterfacesServicesPWTDMPortsClockSourceRef | read-write | mandatory | Clock source reference for Absolute clock mode. 'none' for loop or clock-recovery timing modes. |
| 1.3.6.1.4.1.2281.10.9.7.2.1.7 | ColumngenEquipInterfacesServicesPWTDMPortsClkSrcRefPort | read-write | mandatory | TDM port serving as a clock reference for loop or clock-recovery timing modes |
| 1.3.6.1.4.1.2281.10.9.7.2.1.8 | ColumngenEquipInterfacesServicesPWTDMPortsClkSrcPWId | read-write | mandatory | PW ID (as defined in genEquipServicesPWServicePWId) from which clock will be derived for this port when TimingMode is ClockRecovery. |
| 1.3.6.1.4.1.2281.10.9.7.2.1.9 | ColumngenEquipInterfacesServicesPWTDMPortsLoopback | read-write | mandatory | Enable or Disable line loopback on the E1/T1 interface. |
| 1.3.6.1.4.1.2281.10.9.7.2.1.10 | ColumngenEquipInterfacesServicesPWTDMPortsTimeout | read-write | mandatory | Line loopback timeout, in minutes. 0 means no timer. |
| 1.3.6.1.4.1.2281.10.9.7.2.1.11 | ColumngenEquipInterfacesServicesPWTDMPortsIdleCode | read-write | mandatory | Value to be transmitted on this TDM port in unused timeslots. |
| 1.3.6.1.4.1.2281.10.9.7.2.1.12 | ColumngenEquipInterfacesServicesPWTDMPortsCounter | read-only | mandatory | Loopback time left (in seconds). |
| 1.3.6.1.4.1.2281.10.9.7.2.1.13 | ColumngenEquipInterfacesServicesPWTDMPortsLineStatus | read-only | mandatory | Line status of this TDM port. |
| 1.3.6.1.4.1.2281.10.9.7.3 | NodegenEquipInterfacesNGPW | |||
| 1.3.6.1.4.1.2281.10.9.7.3.1 | TablegenEquipInterfacesNGPWCardTable | not-accessible | mandatory | This table allows configuration of PW-LIC card level parameters. |
| 1.3.6.1.4.1.2281.10.9.7.3.1.1 | RowgenEquipInterfacesNGPWCardEntry | not-accessible | mandatory | This table entry allows configuration of PW-LIC card level parameters. |
| 1.3.6.1.4.1.2281.10.9.7.3.1.1.1 | ColumngenEquipInterfacesNGPWCardSlotID | read-only | mandatory | Slot where PW-LIC is inserted. |
| 1.3.6.1.4.1.2281.10.9.7.3.1.1.2 | ColumngenEquipInterfacesNGPWCardExportClkSysRef | read-write | mandatory | Configures which clock the PW-LIC exports towards the system. |
| 1.3.6.1.4.1.2281.10.9.7.3.1.1.3 | ColumngenEquipInterfacesNGPWCardExportClkSysRefCrPort | read-write | mandatory | TDM port serving as clock recovery reference towards the system. |
| 1.3.6.1.4.1.2281.10.9.7.3.1.1.4 | ColumngenEquipInterfacesNGPWCardIPAddress | read-write | mandatory | IP Address for UDP/IP and MPLS encapsulations. |
| 1.3.6.1.4.1.2281.10.9.7.3.1.1.5 | ColumngenEquipInterfacesNGPWCardIPSubnetMask | read-write | mandatory | IP subnet mask for UDP/IP and MPLS encapsulations. |
| 1.3.6.1.4.1.2281.10.9.7.3.1.1.6 | ColumngenEquipInterfacesNGPWCardClkRecoveryMode | read-write | mandatory | Sets the card either in ACR or differential clock recovery mode. |
| 1.3.6.1.4.1.2281.10.9.7.3.1.1.7 | ColumngenEquipInterfacesNGPWCardDifferentialClkSource | read-write | mandatory | Reference clock source for differential clock recovery (none for adaptive). |
| 1.3.6.1.4.1.2281.10.9.7.3.1.1.8 | ColumngenEquipInterfacesNGPWCardClockFreq | read-write | mandatory | Frequency for differential clock (none for adaptive). |
| 1.3.6.1.4.1.2281.10.9.7.3.1.1.9 | ColumngenEquipInterfacesNGPWCardTDMType | read-write | mandatory | Type of TDM interfaces (E1, DS1). |
| 1.3.6.1.4.1.2281.10.9.7.3.1.1.10 | ColumngenEquipInterfacesNGPWCardLoopbackTimeout | read-write | mandatory | Timeout for TDM ports loopback. |
| 1.3.6.1.4.1.2281.10.9.7.3.3 | TablegenEquipInterfacesNGPWClockInterfaceTable | not-accessible | mandatory | This table allows configuration of the front panel clock interface in the PW-LIC. |
| 1.3.6.1.4.1.2281.10.9.7.3.3.1 | RowgenEquipInterfacesNGPWClockInterfaceEntry | not-accessible | mandatory | This table entry allows configuration of the front panel clock interface in the PW-LIC. |
| 1.3.6.1.4.1.2281.10.9.7.3.3.1.1 | ColumngenEquipInterfacesNGPWClockInterfaceSlotID | read-only | mandatory | Slot where PW-LIC is inserted. |
| 1.3.6.1.4.1.2281.10.9.7.3.3.1.2 | ColumngenEquipInterfacesNGPWClockInterfaceIfIndex | read-write | mandatory | Interface IfIndex. |
| 1.3.6.1.4.1.2281.10.9.7.3.3.1.3 | ColumngenEquipInterfacesNGPWClockInterfaceAdminRx | read-only | mandatory | Clock interface administrative state. |
| 1.3.6.1.4.1.2281.10.9.7.3.3.1.4 | ColumngenEquipInterfacesNGPWClockInterfaceAdminTx | read-write | mandatory | Clock interface administrative state. |
| 1.3.6.1.4.1.2281.10.9.7.3.3.1.5 | ColumngenEquipInterfacesNGPWClockInterfaceExportClkFrontPannel | read-write | mandatory | Configures which signal the PW-LIC exports to the front panel clock interface. |
| 1.3.6.1.4.1.2281.10.9.7.3.3.1.6 | ColumngenEquipInterfacesNGPWClockInterfaceExportClkFrontPanelCrPort | read-write | mandatory | TDM port serving as clock recovery reference for front panel interface. |
| 1.3.6.1.4.1.2281.10.9.7.3.3.1.7 | ColumngenEquipInterfacesNGPWClockInterfaceFrontPanelClockSignalInput | read-write | mandatory | Expected input signal type: E1 or differential sine/square 3.3V 2MHz |
| 1.3.6.1.4.1.2281.10.9.7.3.3.1.8 | ColumngenEquipInterfacesNGPWClockInterfaceFrontPanelClockSignalOutput | read-write | mandatory | Output signal type: E1 or differential sine/square 3.3V 2MH. |
| 1.3.6.1.4.1.2281.10.9.7.3.3.1.9 | ColumngenEquipInterfacesNGPWClockInterfaceSSMAdmin | read-write | mandatory | Enable/disable SSM sending in this interface. |
| 1.3.6.1.4.1.2281.10.9.7.3.3.1.10 | ColumngenEquipInterfacesNGPWClockInterfaceSSMBit | read-write | mandatory | Determines which bit in the frame. |
| 1.3.6.1.4.1.2281.10.9.7.3.3.1.11 | ColumngenEquipInterfacesNGPWClockInterfaceSSMTxDefault | read-write | mandatory | ... |
| 1.3.6.1.4.1.2281.10.9.7.3.4 | TablegenEquipInterfacesNGPWClockInterfaceStatusTable | not-accessible | mandatory | This table contains information about current state of the clock interface in the PW-LIC. |
| 1.3.6.1.4.1.2281.10.9.7.3.4.1 | RowgenEquipInterfacesNGPWClockInterfaceStatusEntry | not-accessible | mandatory | This table entry contains information about current state of the clock interface in the PW-LIC. |
| 1.3.6.1.4.1.2281.10.9.7.3.4.1.1 | ColumngenEquipInterfacesNGPWClockInterfaceStatusSlotID | read-only | mandatory | Slot where PW-LIC is inserted. |
| 1.3.6.1.4.1.2281.10.9.7.3.4.1.2 | ColumngenEquipInterfacesNGPWClockInterfaceStatusIfIndex | read-only | mandatory | Interface IfIndex. |
| 1.3.6.1.4.1.2281.10.9.7.3.4.1.3 | ColumngenEquipInterfacesNGPWClockInterfaceStatusOperationalState | read-only | mandatory | Clock interface operational state. |
| 1.3.6.1.4.1.2281.10.9.7.3.4.1.4 | ColumngenEquipInterfacesNGPWClockInterfaceStatusSSMTx | read-only | mandatory | Currently transmitted SSM bits. |
| 1.3.6.1.4.1.2281.10.9.7.3.4.1.5 | ColumngenEquipInterfacesNGPWClockInterfaceStatusSSMRx | read-only | mandatory | Currently received SSM bits. |
| 1.3.6.1.4.1.2281.10.9.7.3.5 | TablegenEquipInterfacesNGPWEthInterfaceTable | not-accessible | mandatory | This table allows enabling/disabling the PW-LIC internal Ethernet port. |
| 1.3.6.1.4.1.2281.10.9.7.3.5.1 | RowgenEquipInterfacesNGPWEthInterfaceEntry | not-accessible | mandatory | This table allows enabling/disabling the PW-LIC internal Ethernet port. |
| 1.3.6.1.4.1.2281.10.9.7.3.5.1.1 | ColumngenEquipInterfacesNGPWEthInterfaceSlotID | read-write | mandatory | Slot where PW-LIC is inserted. |
| 1.3.6.1.4.1.2281.10.9.7.3.5.1.2 | ColumngenEquipInterfacesNGPWEthInterfaceIfIndex | read-only | mandatory | Interface IfIndex. |
| 1.3.6.1.4.1.2281.10.9.7.3.6 | TablegenEquipInterfacesNGPWEthInterfaceStatusTable | not-accessible | mandatory | This table contains status and RMON statistics of the internal PW-LIC Ethernet port. |
| 1.3.6.1.4.1.2281.10.9.7.3.6.1 | RowgenEquipInterfacesNGPWEthInterfaceStatusEntry | not-accessible | mandatory | This table enatry contains status and RMON statistics of the internal PW-LIC Ethernet port. |
| 1.3.6.1.4.1.2281.10.9.7.3.6.1.2 | ColumngenEquipInterfacesNGPWEthInterfaceStatusIfIndex | read-only | mandatory | Interface IfIndex. |
| 1.3.6.1.4.1.2281.10.9.7.3.6.1.3 | ColumngenEquipInterfacesNGPWEthInterfaceStatusMACAddress | read-only | mandatory | MAC Address to be used in Ethernet and UDP/IP PSN packets |
| 1.3.6.1.4.1.2281.10.9.7.3.6.1.4 | ColumngenEquipInterfacesNGPWEthInterfaceStatusClearStats | write-only | mandatory | Clears internal Ethernet port RMON counters |
| 1.3.6.1.4.1.2281.10.9.7.3.6.1.5 | ColumngenEquipInterfacesNGPWEthInterfaceStatusTxRxFrames64 | read-only | mandatory | Unsigned 64-bit modulo counter of good or bad frames transmitted and received that are 64 bytes in length inclusive |
| 1.3.6.1.4.1.2281.10.9.7.3.6.1.6 | ColumngenEquipInterfacesNGPWEthInterfaceStatusTxRxFrames127 | read-only | mandatory | Unsigned 64-bit modulo counter of good or bad frames transmitted and received that are 65 to 127 bytes in length inclusive. |
| 1.3.6.1.4.1.2281.10.9.7.3.6.1.7 | ColumngenEquipInterfacesNGPWEthInterfaceStatusTxRxFrames255 | read-only | mandatory | Unsigned 64-bit modulo counter of good or bad frames transmitted and received that are 128 to 255 bytes in length inclusive. |
| 1.3.6.1.4.1.2281.10.9.7.3.6.1.8 | ColumngenEquipInterfacesNGPWEthInterfaceStatusTxRxFrames511 | read-only | mandatory | Unsigned 64-bit modulo counter of good or bad frames transmitted and received that are 256 to 511 bytes in length inclusive. |
| 1.3.6.1.4.1.2281.10.9.7.3.6.1.9 | ColumngenEquipInterfacesNGPWEthInterfaceStatusTxRxFrames1023 | read-only | mandatory | Unsigned 64-bit modulo counter of good or bad frames transmitted and received that are 512 to 1023 bytes in length inclusive. |
| 1.3.6.1.4.1.2281.10.9.7.3.6.1.10 | ColumngenEquipInterfacesNGPWEthInterfaceStatusTxRxFrames1518 | read-only | mandatory | Unsigned 64-bit modulo counter of good or bad frames transmitted and received that are 1024 to 1518 bytes in length inclusive. |
| 1.3.6.1.4.1.2281.10.9.7.3.6.1.11 | ColumngenEquipInterfacesNGPWEthInterfaceStatusTxRxFrames1522 | read-only | mandatory | Unsigned 64-bit modulo counter of good or bad frames transmitted and received that are 1519 to 1522 bytes in length inclusive. |
| 1.3.6.1.4.1.2281.10.9.7.3.6.1.12 | ColumngenEquipInterfacesNGPWEthInterfaceStatusRxBytes | read-only | mandatory | Unsigned 64-bit modulo counter of byte count of frames received with 0 to 1518 bytes, including those in bad packets. |
| 1.3.6.1.4.1.2281.10.9.7.3.6.1.13 | ColumngenEquipInterfacesNGPWEthInterfaceStatusRxPackets | read-only | mandatory | Unsigned 64-bit modulo counter of number of received packets (including bad packets, all Unicast, Broadcast, and Multicast packets). |
| 1.3.6.1.4.1.2281.10.9.7.3.6.1.14 | ColumngenEquipInterfacesNGPWEthInterfaceStatusRxErrFcs | read-only | mandatory | Unsigned 64-bit modulo counter of frames received that have a integral 64 to 1518 byte length and contain a Frame Check Sequence error.. |
| 1.3.6.1.4.1.2281.10.9.7.3.6.1.15 | ColumngenEquipInterfacesNGPWEthInterfaceStatusRxMulticast | read-only | mandatory | Unsigned 64-bit modulo counter of number of multicast good frames of length 64 to1518 (non VLAN) or 1522 (VLAN) bytes excluding Broadcast frames. |
| 1.3.6.1.4.1.2281.10.9.7.3.6.1.16 | ColumngenEquipInterfacesNGPWEthInterfaceStatusRxBroadcast | read-only | mandatory | Unsigned 64-bit modulo counter of number of broadcast good frames of length 64 to1518 (non VLAN) or 1522 (VLAN) bytes excluding Broadcast frames. |
| 1.3.6.1.4.1.2281.10.9.7.3.6.1.17 | ColumngenEquipInterfacesNGPWEthInterfaceStatusRxMacControl | read-only | mandatory | Unsigned 64-bit modulo counter of MAC Control frames received (PAUSE &Unsupported). |
| 1.3.6.1.4.1.2281.10.9.7.3.6.1.18 | ColumngenEquipInterfacesNGPWEthInterfaceStatusRxMacPause | read-only | mandatory | Unsigned 64-bit modulo counter of valid PAUSE MAC Control frames received. |
| 1.3.6.1.4.1.2281.10.9.7.3.6.1.19 | ColumngenEquipInterfacesNGPWEthInterfaceStatusRxMacUnknown | read-only | mandatory | Unsigned 64-bit modulo counter of MAC Control Frames received that contain an opcode other than a PAUSE. |
| 1.3.6.1.4.1.2281.10.9.7.3.6.1.20 | ColumngenEquipInterfacesNGPWEthInterfaceStatusRxErrCode | read-only | mandatory | Unsigned 64-bit modulo counter of number of instances where a valid carrier was present and at least one invalid data symbol was detected. |
| 1.3.6.1.4.1.2281.10.9.7.3.6.1.21 | ColumngenEquipInterfacesNGPWEthInterfaceStatusRxErrFalseCarrier | read-only | mandatory | Unsigned 64-bit modulo counter of number of false carriers detected during idle, as defined by a 1 on RX_ER and an '0xE' on RXD. |
| 1.3.6.1.4.1.2281.10.9.7.3.6.1.22 | ColumngenEquipInterfacesNGPWEthInterfaceStatusRxUndersize | read-only | mandatory | Unsigned 64-bit modulo counter of frames received that are less than 64 bytes in length, contain a valid FCS, and were otherwise well formed. |
| 1.3.6.1.4.1.2281.10.9.7.3.6.1.23 | ColumngenEquipInterfacesNGPWEthInterfaceStatusRxOversize | read-only | mandatory | Unsigned 64-bit modulo counter of frames received that exceeded maximum bytes in length, contain a valid FCS, and were otherwise well formed. |
| 1.3.6.1.4.1.2281.10.9.7.3.6.1.24 | ColumngenEquipInterfacesNGPWEthInterfaceStatusRxFragments | read-only | mandatory | Unsigned 64-bit modulo counter of frames received which are less than 64 bytes in length and contain an invalid FCS. |
| 1.3.6.1.4.1.2281.10.9.7.3.6.1.25 | ColumngenEquipInterfacesNGPWEthInterfaceStatusRxJabber | read-only | mandatory | Unsigned 64-bit modulo counter of frames received which exceed maximum length and contain an invalid FCS, including alignment errors. |
| 1.3.6.1.4.1.2281.10.9.7.3.6.1.26 | ColumngenEquipInterfacesNGPWEthInterfaceStatusRxDropped | read-only | mandatory | Unsigned 64-bit modulo counter of frames received that are streamed to the system but are later dropped due to lack of system resources. |
| 1.3.6.1.4.1.2281.10.9.7.3.6.1.27 | ColumngenEquipInterfacesNGPWEthInterfaceStatusTxBytes | read-only | mandatory | Unsigned 64-bit modulo counter of number of bytes that were put on the wire including fragments of frames that were involved with collisions. |
| 1.3.6.1.4.1.2281.10.9.7.3.6.1.28 | ColumngenEquipInterfacesNGPWEthInterfaceStatusTxPackets | read-only | mandatory | Unsigned 64-bit modulo counter of transmitted packets. |
| 1.3.6.1.4.1.2281.10.9.7.3.6.1.29 | ColumngenEquipInterfacesNGPWEthInterfaceStatusTxMulticast | read-only | mandatory | Unsigned 64-bit modulo counter of Multicast valid frames transmitted (excluding Broadcast frames). |
| 1.3.6.1.4.1.2281.10.9.7.3.6.1.30 | ColumngenEquipInterfacesNGPWEthInterfaceStatusTxBroadcast | read-only | mandatory | Unsigned 64-bit modulo counter of Broadcast frames transmitted (excluding Multicast frames). |
| 1.3.6.1.4.1.2281.10.9.7.3.6.1.31 | ColumngenEquipInterfacesNGPWEthInterfaceStatusTxMacPause | read-only | mandatory | Unsigned 64-bit modulo counter of valid PAUSE MAC Control frames transmitted. |
| 1.3.6.1.4.1.2281.10.9.7.3.6.1.32 | ColumngenEquipInterfacesNGPWEthInterfaceStatusTxDefer | read-only | mandatory | Unsigned 64-bit modulo counter of frames that were deferred upon first transmission attempt. Does not include frames involved in collisions.. |
| 1.3.6.1.4.1.2281.10.9.7.3.6.1.33 | ColumngenEquipInterfacesNGPWEthInterfaceStatusTxExcessDefer | read-only | mandatory | Unsigned 64-bit modulo counter of number of frames aborted that were deferred for an excessive period of time (3036 byte times). |
| 1.3.6.1.4.1.2281.10.9.7.3.6.1.34 | ColumngenEquipInterfacesNGPWEthInterfaceStatusTxSingleCollision | read-only | mandatory | Unsigned 64-bit modulo counter of frames transmitted which experienced exactly one collision during transmission. |
| 1.3.6.1.4.1.2281.10.9.7.3.6.1.35 | ColumngenEquipInterfacesNGPWEthInterfaceStatusTxMultiCollision | read-only | mandatory | Unsigned 64-bit modulo counter of frames transmitted which experienced 2-15 collisions. |
| 1.3.6.1.4.1.2281.10.9.7.3.6.1.36 | ColumngenEquipInterfacesNGPWEthInterfaceStatusTxLateCollision | read-only | mandatory | Unsigned 64-bit modulo counter of frames transmitted that experienced a late collision during a transmission attempt. |
| 1.3.6.1.4.1.2281.10.9.7.3.6.1.37 | ColumngenEquipInterfacesNGPWEthInterfaceStatusTxExcessCollision | read-only | mandatory | Unsigned 64-bit modulo counter of frames that experienced 16 collisions during transmission and were aborted. |
| 1.3.6.1.4.1.2281.10.9.7.3.6.1.38 | ColumngenEquipInterfacesNGPWEthInterfaceStatusTxNoCollision | read-only | mandatory | Unsigned 64-bit modulo counter of number of frames transmitted that had no collision. |
| 1.3.6.1.4.1.2281.10.9.7.3.6.1.39 | ColumngenEquipInterfacesNGPWEthInterfaceStatusTxMacPauseHonored | read-only | mandatory | Unsigned 64-bit modulo counter of number of times a valid PAUSE MAC Control frame was transmitted and honored. |
| 1.3.6.1.4.1.2281.10.9.7.3.6.1.40 | ColumngenEquipInterfacesNGPWEthInterfaceStatusTxDropped | read-only | mandatory | Unsigned 64-bit modulo counter of number of times the input PFH is asserted. |
| 1.3.6.1.4.1.2281.10.9.7.3.6.1.41 | ColumngenEquipInterfacesNGPWEthInterfaceStatusTxJabber | read-only | mandatory | Unsigned 64-bit modulo counter of oversized transmitted frames with an incorrect FCS value. |
| 1.3.6.1.4.1.2281.10.9.7.3.6.1.42 | ColumngenEquipInterfacesNGPWEthInterfaceStatusTxErrFcs | read-only | mandatory | Unsigned 64-bit modulo counter of valid sized packets transmitted with an incorrec tFCS value. |
| 1.3.6.1.4.1.2281.10.9.7.3.6.1.43 | ColumngenEquipInterfacesNGPWEthInterfaceStatusTxControl | read-only | mandatory | Unsigned 64-bit modulo counter of valid size frames transmitted with a Type Field signifying a Control frame.. |
| 1.3.6.1.4.1.2281.10.9.7.3.6.1.44 | ColumngenEquipInterfacesNGPWEthInterfaceStatusTxOversize | read-only | mandatory | Unsigned 64-bit modulo counter of oversized transmitted frames with a correct. |
| 1.3.6.1.4.1.2281.10.9.7.3.6.1.45 | ColumngenEquipInterfacesNGPWEthInterfaceStatusTxUndersize | read-only | mandatory | Unsigned 64-bit modulo counter of transmitted frames less then 64 bytes, with a correctFCS value. |
| 1.3.6.1.4.1.2281.10.9.7.3.6.1.46 | ColumngenEquipInterfacesNGPWEthInterfaceStatusTxFragments | read-only | mandatory | Unsigned 64-bit modulo counter of transmitted frames less then 64 bytes, with an incorrect FCS value. |
| 1.3.6.1.4.1.2281.10.9.7.3.6.1.47 | ColumngenEquipInterfacesNGPWEthInterfaceStatusRxIwFrames | read-only | mandatory | Unsigned 64-bit modulo counter of the number of received Ethernet Interworking frames that were received and sent to the L3 Interworking module. |
| 1.3.6.1.4.1.2281.10.9.7.3.6.1.48 | ColumngenEquipInterfacesNGPWEthInterfaceStatusRxErrFbpUnderrun | read-only | mandatory | Unsigned 64-bit modulo counter of the number of received Ethernet Interworking frames which were dropped due free buffer pool (FBP) Overrun. |
| 1.3.6.1.4.1.2281.10.9.7.3.6.1.49 | ColumngenEquipInterfacesNGPWEthInterfaceStatusRxErrNonvalidMac | read-only | mandatory | Unsigned 64-bit modulo counter of the number of received Ethernet frames whose MAC-DA is not valid. |
| 1.3.6.1.4.1.2281.10.9.7.3.6.1.50 | ColumngenEquipInterfacesNGPWEthInterfaceStatusRxErrMru | read-only | mandatory | Unsigned 64-bit modulo counter of the number of received Ethernet Interworking frames which were dropped due the Maximum Receive Unit. |
| 1.3.6.1.4.1.2281.10.9.7.3.6.1.51 | ColumngenEquipInterfacesNGPWEthInterfaceStatusRxErrSdu | read-only | mandatory | Unsigned 64-bit modulo counter of the number of Ethernet frames which were closed due the maximum frame size has been exceeded. |
| 1.3.6.1.4.1.2281.10.9.7.3.6.1.52 | ColumngenEquipInterfacesNGPWEthInterfaceStatusTxErrUnderrun | read-only | mandatory | Unsigned 64-bit modulo counter of number of times Ethernet transmitter underun occurred. |
| 1.3.6.1.4.1.2281.10.9.7.3.6.1.53 | ColumngenEquipInterfacesNGPWEthInterfaceStatusRxErrOverrun | read-only | mandatory | Unsigned 64-bit modulo counter of number of received Ethernet frames which were closed or discarded due to a receive buffer overrun event. |
| 1.3.6.1.4.1.2281.10.9.7.3.6.1.54 | ColumngenEquipInterfacesNGPWEthInterfaceStatusSlotID | read-only | mandatory | Slot where PW-LIC is inserted |
| 1.3.6.1.4.1.2281.10.9.7.3.7 | TablegenEquipInterfacesNGPWCardStatusTable | not-accessible | mandatory | This table contains information about PW-LIC card level status. |
| 1.3.6.1.4.1.2281.10.9.7.3.7.1 | RowgenEquipInterfacesNGPWCardStatusEntry | not-accessible | mandatory | This table contains information about PW-LIC card level status. |
| 1.3.6.1.4.1.2281.10.9.7.3.7.1.1 | ColumngenEquipInterfacesNGPWCardStatusSlotID | read-only | mandatory | Slot where PW-LIC is inserted. |
| 1.3.6.1.4.1.2281.10.9.7.3.7.1.2 | ColumngenEquipInterfacesNGPWCardStatusSWVersion | read-only | mandatory | Bundle ID. |
| 1.3.6.1.4.1.2281.10.9.8 | NodegenEquipInterfacesCet | |||
| 1.3.6.1.4.1.2281.10.9.8.1 | NodegenEquipInterfacesCetGeneral | |||
| 1.3.6.1.4.1.2281.10.9.8.1.1 | ScalargenEquipInterfacesCetMru | read-write | mandatory | Maximum Frame Size. |
| 1.3.6.1.4.1.2281.10.9.8.2 | TablegenEquipInterfacesCetPhyConfigTable | not-accessible | mandatory | Ethernet physical port configuration table. |
| 1.3.6.1.4.1.2281.10.9.8.2.1 | RowgenEquipInterfacesCetPhyConfigEntry | not-accessible | mandatory | Ethernet physical port configuration table entry. |
| 1.3.6.1.4.1.2281.10.9.8.2.1.1 | ColumngenEquipInterfacesCetPhyConfigIfIndex | read-only | mandatory | Ethernet physical port if-index table key. |
| 1.3.6.1.4.1.2281.10.9.8.2.1.2 | ColumngenEquipInterfacesCetPhyConfigDescription | read-write | mandatory | Setting Ethernet physical port user description. |
| 1.3.6.1.4.1.2281.10.9.8.2.1.3 | ColumngenEquipInterfacesCetPhyConfigMediaType | read-write | mandatory | Setting Ethernet physical port media type. |
| 1.3.6.1.4.1.2281.10.9.8.2.1.4 | ColumngenEquipInterfacesCetPhyConfigAdmin | read-write | mandatory | Setting Ethernet physical port administration. |
| 1.3.6.1.4.1.2281.10.9.8.2.1.5 | ColumngenEquipInterfacesCetPhyConfigAutoNegotiation | read-write | mandatory | Setting Ethernet physical port auto negotiation state. |
| 1.3.6.1.4.1.2281.10.9.8.2.1.6 | ColumngenEquipInterfacesCetPhyConfigSpeed | read-write | mandatory | Setting Ethernet physical maximum port speed Affects Auto Neg Capability Advertised Bits. |
| 1.3.6.1.4.1.2281.10.9.8.2.1.7 | ColumngenEquipInterfacesCetPhyConfigDuplex | read-write | mandatory | Setting Ethernet physical port duplex Affects Auto Neg Capability Advertised Bits. |
| 1.3.6.1.4.1.2281.10.9.8.2.1.8 | ColumngenEquipInterfacesCetPhyConfigMasterSlave | read-write | mandatory | Setting Ethernet physical port master slave for 1000BaseT Affects Auto Neg Capability Advertised Bits. |
| 1.3.6.1.4.1.2281.10.9.8.2.1.10 | ColumngenEquipInterfacesCetPhyConfigIfg | read-write | mandatory | Inter Frame GAP value in bytes. |
| 1.3.6.1.4.1.2281.10.9.8.2.1.11 | ColumngenEquipInterfacesCetPhyConfigPreamble | read-write | mandatory | port preamble value in bytes. |
| 1.3.6.1.4.1.2281.10.9.8.2.1.12 | ColumngenEquipInterfacesCetPhyConfigMacAddress | read-write | mandatory | Ethernet physical port mac-address. |
| 1.3.6.1.4.1.2281.10.9.8.2.1.13 | ColumngenEquipInterfacesCetPhyConfigType | read-write | mandatory | Setting Ethernet physical port type. |
| 1.3.6.1.4.1.2281.10.9.8.2.1.14 | ColumngenEquipInterfacesCetPhyConfigPortPmAdmin | read-write | mandatory | Enable/Disable PMs on port level. |
| 1.3.6.1.4.1.2281.10.9.8.2.1.15 | ColumngenEquipInterfacesCetPhyConfigPortPmRxBytesThreshold | read-write | mandatory | Threshold of received bytes PM. |
| 1.3.6.1.4.1.2281.10.9.8.2.1.16 | ColumngenEquipInterfacesCetPhyConfigPortPmTxBytesThreshold | read-write | mandatory | Threshold of transmitted bytes PM. |
| 1.3.6.1.4.1.2281.10.9.8.3 | TablegenEquipInterfacesCetPhyStatusTable | not-accessible | mandatory | Ethernet physical port configuration table. |
| 1.3.6.1.4.1.2281.10.9.8.3.1 | RowgenEquipInterfacesCetPhyStatusEntry | not-accessible | mandatory | This table allows configuration of the 16 internal E1/DS1 ports. |
| 1.3.6.1.4.1.2281.10.9.8.3.1.1 | ColumngenEquipInterfacesCetPhyStatusIfIndex | read-only | mandatory | Ethernet physical port if-index table key. |
| 1.3.6.1.4.1.2281.10.9.8.3.1.2 | ColumngenEquipInterfacesCetPhyStatusMediaType | read-only | mandatory | Setting Ethernet physical port media type. |
| 1.3.6.1.4.1.2281.10.9.8.3.1.3 | ColumngenEquipInterfacesCetPhyStatusOperationalStatus | read-only | mandatory | Ethernet physical port operational-status. |
| 1.3.6.1.4.1.2281.10.9.8.3.1.4 | ColumngenEquipInterfacesCetPhystatusAutoNegotiation | read-only | mandatory | Ethernet physical port auto negotiation status. |
| 1.3.6.1.4.1.2281.10.9.8.3.1.5 | ColumngenEquipInterfacesCetPhyStatusSpeed | read-only | mandatory | Actual Ethernet physical port speed. |
| 1.3.6.1.4.1.2281.10.9.8.3.1.6 | ColumngenEquipInterfacesCetPhyStatusDuplex | read-only | mandatory | Actual Ethernet physical port duplex. |
| 1.3.6.1.4.1.2281.10.9.8.3.1.7 | ColumngenEquipInterfacesCetPhyStatusMasterSlave | read-only | mandatory | Actual Ethernet physical port master slave for 1000BaseT. |
| 1.3.6.1.4.1.2281.10.9.8.4 | TablegenEquipInterfacesCetLogicConfigTable | not-accessible | mandatory | The table holds the ingress logical port configuration (it is the same point of view for single interface or group of ports) . |
| 1.3.6.1.4.1.2281.10.9.8.4.1 | RowgenEquipInterfacesCetLogicConfigEntry | not-accessible | mandatory | The table entry holds the ingress logical port configuration (it is the same point of view for single interface or group of ports). |
| 1.3.6.1.4.1.2281.10.9.8.4.1.1 | ColumngenEquipInterfacesCetLogicConfigIfIndex | read-only | mandatory | Ethernet Logical port if-index table key. |
| 1.3.6.1.4.1.2281.10.9.8.4.1.2 | ColumngenEquipInterfacesCetLogicConfigTrafficFlow | read-write | mandatory | Control the the traffic via logical port which is connected to physical interface (in case of group it control the all interfaces of the group). |
| 1.3.6.1.4.1.2281.10.9.8.4.1.3 | ColumngenEquipInterfacesCetLogicConfigEdgePort | read-write | mandatory | Port Edge Mode (edge / non-edge). |
| 1.3.6.1.4.1.2281.10.9.8.4.1.4 | ColumngenEquipInterfacesCetLogicConfigIngressTcamClassification | read-only | mandatory | ingress-tcam-classification. |
| 1.3.6.1.4.1.2281.10.9.8.4.1.5 | ColumngenEquipInterfacesCetLogicConfigDefaultVlanTag | read-write | mandatory | Default Network Vlan ID. |
| 1.3.6.1.4.1.2281.10.9.8.4.1.6 | ColumngenEquipInterfacesCetLogicConfigInLineCompensation | read-write | mandatory | Ethernet Layer 1 Ingress Byte Compensation. |
| 1.3.6.1.4.1.2281.10.9.8.4.1.7 | ColumngenEquipInterfacesCetLogicConfigOutLineCompensation | read-write | mandatory | Ethernet Layer 1 Egress Byte Compensation from the specific logical port. |
| 1.3.6.1.4.1.2281.10.9.8.4.1.8 | ColumngenEquipInterfacesCetLogicConfigPclId | read-only | mandatory | .... |
| 1.3.6.1.4.1.2281.10.9.8.4.1.9 | ColumngenEquipInterfacesCetLogicConfigDefCos | read-write | mandatory | Port Default CoS. |
| 1.3.6.1.4.1.2281.10.9.8.4.1.10 | ColumngenEquipInterfacesCetLogicConfigVlanUpToCosTrustMode | read-write | mandatory | Trust VLAN UP bits for classification from the specific logical port. |
| 1.3.6.1.4.1.2281.10.9.8.4.1.11 | ColumngenEquipInterfacesCetLogicConfigDscpToCosTrustMode | read-write | mandatory | Trust DSCP for classification from the specific logical port. |
| 1.3.6.1.4.1.2281.10.9.8.4.1.12 | ColumngenEquipInterfacesCetLogicConfigMplsExpToCosTrustMode | read-write | mandatory | Trust MPLS EXP bits for classification from the specific logical port. |
| 1.3.6.1.4.1.2281.10.9.8.4.1.13 | ColumngenEquipInterfacesCetLogicConfigMacAddress | read-only | mandatory | Ethernet logical port mac-address. |
| 1.3.6.1.4.1.2281.10.9.8.4.1.14 | ColumngenEquipInterfacesCetLogicConfigLoopbackSwapMacAddressAdmin | read-write | mandatory | Swap MAC address for Ethernet port loopback. |
| 1.3.6.1.4.1.2281.10.9.8.4.1.15 | ColumngenEquipInterfacesCetLogicConfigLoopbackAdmin | read-write | mandatory | Ethernet loopback admin. |
| 1.3.6.1.4.1.2281.10.9.8.4.1.16 | ColumngenEquipInterfacesCetLogicConfigLoopbackDuration | read-write | mandatory | Ethernet loopback duration. Allowed values 1 to 9000 seconds. |
| 1.3.6.1.4.1.2281.10.9.8.5 | TablegenEquipInterfacesCetLogicStatusTable | not-accessible | mandatory | The table holds the ingress logical port status (it is the same point of view for single interface or group of ports). |
| 1.3.6.1.4.1.2281.10.9.8.5.1 | RowgenEquipInterfacesCetLogicStatusEntry | not-accessible | mandatory | The table entry holds the ingress logical port status (it is the same point of view for single interface or group of ports). |
| 1.3.6.1.4.1.2281.10.9.8.5.1.1 | ColumngenEquipInterfacesCetLogicStatusIfIndex | read-only | mandatory | Ethernet Logical port if-index table key. |
| 1.3.6.1.4.1.2281.10.9.8.5.1.2 | ColumngenEquipInterfacesCetLogicStatusOperationalStatus | read-only | mandatory | Ethernet logical port operational-status (Up or Down). |
| 1.3.6.1.4.1.2281.10.9.8.6 | TablegenEquipInterfacesCetBcastPolicerAssociationTable | not-accessible | mandatory | Ethernet Port Broadcast configuration table. |
| 1.3.6.1.4.1.2281.10.9.8.6.1 | RowgenEquipInterfacesCetBcastPolicerAssociationEntry | not-accessible | mandatory | Ethernet Port Broadcast configuration table entry. |
| 1.3.6.1.4.1.2281.10.9.8.6.1.1 | ColumngenEquipInterfacesCetBcastPolicerAssociationIfIndex | read-only | mandatory | Ethernet Logical port if-index table key. |
| 1.3.6.1.4.1.2281.10.9.8.6.1.2 | ColumngenEquipInterfacesCetBcastPolicerAssociationAssociatedProfileId | read-write | mandatory | Policer Profile. |
| 1.3.6.1.4.1.2281.10.9.8.6.1.3 | ColumngenEquipInterfacesCetBcastPolicerAssociationAssociationAdmin | read-write | mandatory | Broadcast Policer Admin (enable / disable). |
| 1.3.6.1.4.1.2281.10.9.8.6.1.30 | ColumngenEquipInterfacesCetBcastPolicerAssociationAssociationRowStatus | read-write | mandatory | Table Mib Row Status. |
| 1.3.6.1.4.1.2281.10.9.8.7 | TablegenEquipInterfacesCetEtype1PolicerAssociationTable | not-accessible | mandatory | Ethernet Policing of user configuration ethertype type 1 (at port level) table. |
| 1.3.6.1.4.1.2281.10.9.8.7.1 | RowgenEquipInterfacesCetEtype1PolicerAssociationEntry | not-accessible | mandatory | Ethernet Policing of user configuration ethertype type 1 (at port level) table entry. |
| 1.3.6.1.4.1.2281.10.9.8.7.1.1 | ColumngenEquipInterfacesCetEtype1PolicerAssociationIfIndex | read-only | mandatory | Ethernet Logical port if-index table key. |
| 1.3.6.1.4.1.2281.10.9.8.7.1.2 | ColumngenEquipInterfacesCetEtype1PolicerAssociationProfileId | read-write | mandatory | Ingress Policer Profile ID. |
| 1.3.6.1.4.1.2281.10.9.8.7.1.3 | ColumngenEquipInterfacesCetEtype1PolicerAssociationEthertype | read-write | mandatory | Ethernet Ethertype 1 user configuration value. |
| 1.3.6.1.4.1.2281.10.9.8.7.1.4 | ColumngenEquipInterfacesCetEtype1PolicerAssociationAdmin | read-write | mandatory | Ingress Ethertype 1 Policer Admin (enable / disable). |
| 1.3.6.1.4.1.2281.10.9.8.7.1.30 | ColumngenEquipInterfacesCetEtype1PolicerAssociationRowStatus | read-write | mandatory | Table Mib Row Status. |
| 1.3.6.1.4.1.2281.10.9.8.8 | TablegenEquipInterfacesCetEtype2PolicerAssociationTable | not-accessible | mandatory | Ethernet Policing of user configuration ethertype type 2 (at port level) table. |
| 1.3.6.1.4.1.2281.10.9.8.8.1 | RowgenEquipInterfacesCetEtype2PolicerAssociationEntry | not-accessible | mandatory | Ethernet Policing of user configuration ethertype type 2 (at port level) table. |
| 1.3.6.1.4.1.2281.10.9.8.8.1.1 | ColumngenEquipInterfacesCetEtype2PolicerAssociationIfIndex | read-only | mandatory | Ethernet Logical port if-index table key. |
| 1.3.6.1.4.1.2281.10.9.8.8.1.2 | ColumngenEquipInterfacesCetEtype2PolicerAssociationAssociatedProfileId | read-write | mandatory | Ingress Policer Profile ID. |
| 1.3.6.1.4.1.2281.10.9.8.8.1.3 | ColumngenEquipInterfacesCetEtype2PolicerAssociationEthertype | read-write | mandatory | Ethernet Ethertype 2 user configuration value. |
| 1.3.6.1.4.1.2281.10.9.8.8.1.4 | ColumngenEquipInterfacesCetEtype2PolicerAssociationAdmin | read-write | mandatory | Ingress Ethertype 2 Policer Admin (enable / disable). |
| 1.3.6.1.4.1.2281.10.9.8.8.1.30 | ColumngenEquipInterfacesCetEtype2PolicerAssociationRowStatus | read-write | mandatory | Table Mib Row Status. |
| 1.3.6.1.4.1.2281.10.9.8.9 | TablegenEquipInterfacesCetEtype3PolicerAssociationTable | not-accessible | mandatory | Ethernet Policing of user configuration ethertype type 3 (at port level) table. |
| 1.3.6.1.4.1.2281.10.9.8.9.1 | RowgenEquipInterfacesCetEtype3PolicerAssociationEntry | not-accessible | mandatory | Ethernet Policing of user configuration ethertype type 3 (at port level) table entry. |
| 1.3.6.1.4.1.2281.10.9.8.9.1.1 | ColumngenEquipInterfacesCetEtype3PolicerAssociationIfIndex | read-only | mandatory | Ethernet Logical port if-index table key. |
| 1.3.6.1.4.1.2281.10.9.8.9.1.2 | ColumngenEquipInterfacesCetEtype3PolicerAssociationAssociatedProfileId | read-write | mandatory | Ingress Policer Profile ID. |
| 1.3.6.1.4.1.2281.10.9.8.9.1.3 | ColumngenEquipInterfacesCetEtype3PolicerAssociationEthertype | read-write | mandatory | Ethernet Ethertype 3 user configuration value. |
| 1.3.6.1.4.1.2281.10.9.8.9.1.4 | ColumngenEquipInterfacesCetEtype3PolicerAssociationAdmin | read-write | mandatory | Ingress Ethertype 3 Policer Admin (enable / disable). |
| 1.3.6.1.4.1.2281.10.9.8.9.1.30 | ColumngenEquipInterfacesCetEtype3PolicerAssociationRowStatus | read-write | mandatory | Table Mib Row Status. |
| 1.3.6.1.4.1.2281.10.9.8.10 | TablegenEquipInterfacesCetMcastPolicerAssociationTable | not-accessible | mandatory | Ethernet Port Multicast configuration table. |
| 1.3.6.1.4.1.2281.10.9.8.10.1 | RowgenEquipInterfacesCetMcastPolicerAssociationEntry | not-accessible | mandatory | Ethernet Port Multicast configuration table. |
| 1.3.6.1.4.1.2281.10.9.8.10.1.1 | ColumngenEquipInterfacesCetMcastPolicerAssociationIfIndex | read-only | mandatory | Ethernet Logical port if-index table key. |
| 1.3.6.1.4.1.2281.10.9.8.10.1.2 | ColumngenEquipInterfacesCetMcastPolicerAssociationAssociatedProfileId | read-write | mandatory | Ingress Policer Profile ID. |
| 1.3.6.1.4.1.2281.10.9.8.10.1.3 | ColumngenEquipInterfacesCetMcastPolicerAssociationAdmin | read-write | mandatory | Ingress Multicast Policer Admin (enable / disable). |
| 1.3.6.1.4.1.2281.10.9.8.10.1.30 | ColumngenEquipInterfacesCetMcastPolicerAssociationAssociationRowStatus | read-write | mandatory | Table Mib Row Status. |
| 1.3.6.1.4.1.2281.10.9.8.11 | TablegenEquipInterfacesCetUcastPolicerAssociationTable | not-accessible | mandatory | Ethernet Port Multicast configuration table. |
| 1.3.6.1.4.1.2281.10.9.8.11.1 | RowgenEquipInterfacesCetUcastPolicerAssociationEntry | not-accessible | mandatory | Ethernet Port Multicast configuration table. |
| 1.3.6.1.4.1.2281.10.9.8.11.1.1 | ColumngenEquipInterfacesCetUcastPolicerAssociationIfIndex | read-only | mandatory | Ethernet Logical port if-index table key. |
| 1.3.6.1.4.1.2281.10.9.8.11.1.2 | ColumngenEquipInterfacesCetUcastPolicerAssociationAssociatedProfileId | read-write | mandatory | Ingress Policer Profile ID. |
| 1.3.6.1.4.1.2281.10.9.8.11.1.3 | ColumngenEquipInterfacesCetUcastPolicerAssociationAdmin | read-write | mandatory | Ingress Unicast Policer Admin (enable / disable). |
| 1.3.6.1.4.1.2281.10.9.8.11.1.30 | ColumngenEquipInterfacesCetUcastPolicerAssociationRowStatus | read-write | mandatory | Table Mib Row Status. |
| 1.3.6.1.4.1.2281.10.9.8.12 | TablegenEquipInterfacesCetLagTable | not-accessible | mandatory | This table holds the members of a Link Aggregation Group. |
| 1.3.6.1.4.1.2281.10.9.8.12.1 | RowgenEquipInterfacesCetLagEntry | not-accessible | mandatory | This table holds the members of a Link Aggregation Group entry. |
| 1.3.6.1.4.1.2281.10.9.8.12.1.1 | ColumngenEquipInterfacesCetLagIfIndex | read-only | mandatory | Link aggregation group IF index. |
| 1.3.6.1.4.1.2281.10.9.8.12.1.2 | ColumngenEquipInterfacesCetLagMember1IfIndex | read-write | mandatory | Link aggregation member 1 IF index. |
| 1.3.6.1.4.1.2281.10.9.8.12.1.3 | ColumngenEquipInterfacesCetLagMember2IfIndex | read-write | mandatory | Link aggregation member 2 IF index. |
| 1.3.6.1.4.1.2281.10.9.8.12.1.4 | ColumngenEquipInterfacesCetLagMember3IfIndex | read-write | mandatory | Link aggregation member 3 IF index. |
| 1.3.6.1.4.1.2281.10.9.8.12.1.5 | ColumngenEquipInterfacesCetLagMember4IfIndex | read-write | mandatory | Link aggregation member 4 IF index. |
| 1.3.6.1.4.1.2281.10.9.8.12.1.6 | ColumngenEquipInterfacesCetLagMember5IfIndex | read-write | mandatory | Link aggregation member 5 IF index. |
| 1.3.6.1.4.1.2281.10.9.8.12.1.7 | ColumngenEquipInterfacesCetLagMember6IfIndex | read-write | mandatory | Link aggregation member 6 IF index. |
| 1.3.6.1.4.1.2281.10.9.8.12.1.8 | ColumngenEquipInterfacesCetLagMember7IfIndex | read-write | mandatory | Link aggregation member 7 IF index. |
| 1.3.6.1.4.1.2281.10.9.8.12.1.9 | ColumngenEquipInterfacesCetLagMember8IfIndex | read-write | mandatory | Link aggregation member 8 IF index. |
| 1.3.6.1.4.1.2281.10.9.8.12.1.10 | ColumngenEquipInterfacesCetLagMember9IfIndex | read-write | mandatory | Link aggregation member 9 IF index. |
| 1.3.6.1.4.1.2281.10.9.8.12.1.11 | ColumngenEquipInterfacesCetLagMember10IfIndex | read-write | mandatory | Link aggregation member 9 IF index. |
| 1.3.6.1.4.1.2281.10.9.8.12.1.12 | ColumngenEquipInterfacesCetLagMember11IfIndex | read-write | mandatory | Link aggregation member 11 IF index. |
| 1.3.6.1.4.1.2281.10.9.8.12.1.13 | ColumngenEquipInterfacesCetLagMember12IfIndex | read-write | mandatory | Link aggregation member 12 IF index. |
| 1.3.6.1.4.1.2281.10.9.8.12.1.14 | ColumngenEquipInterfacesCetLagMember13IfIndex | read-write | mandatory | Link aggregation member 13 IF index. |
| 1.3.6.1.4.1.2281.10.9.8.12.1.15 | ColumngenEquipInterfacesCetLagMember14IfIndex | read-write | mandatory | Link aggregation member 14 IF index. |
| 1.3.6.1.4.1.2281.10.9.8.12.1.16 | ColumngenEquipInterfacesCetLagMember15IfIndex | read-write | mandatory | Link aggregation member 15 IF index. |
| 1.3.6.1.4.1.2281.10.9.8.12.1.17 | ColumngenEquipInterfacesCetLagMember16IfIndex | read-write | mandatory | Link aggregation member 16 IF index. |
| 1.3.6.1.4.1.2281.10.9.8.12.1.30 | ColumngenEquipInterfacesCetLagRowStatus | read-write | mandatory | Table Mib Row Status. |
| 1.3.6.1.4.1.2281.10.9.8.13 | TablegenEquipServicesCetConfigServiceToInstanceTable | not-accessible | mandatory | This table is used for mapping xSTP instance number per service. |
| 1.3.6.1.4.1.2281.10.9.8.13.1 | RowgenEquipServicesCetConfigServiceToInstanceEntry | not-accessible | mandatory | This table entry is used for mapping xSTP instance number per service. |
| 1.3.6.1.4.1.2281.10.9.8.13.1.1 | ColumngenEquipServicesCetConfigServiceToInstanceServiceIndex | read-write | mandatory | Service ID. |
| 1.3.6.1.4.1.2281.10.9.8.13.1.2 | ColumngenEquipServicesCetConfigServiceToInstanceInstanceIndex | read-write | mandatory | xSTP Instance ID for the specific Service. |
| 1.3.6.1.4.1.2281.10.9.9 | NodegenEquipInterfacesIfManager | |||
| 1.3.6.1.4.1.2281.10.9.9.1 | TablegenEquipInterfacesIfManagerTable | not-accessible | mandatory | This table contains a list of configuration information about the user managed interfaces. |
| 1.3.6.1.4.1.2281.10.9.9.1.1 | RowgenEquipInterfacesIfManagerEntry | not-accessible | mandatory | This table entry contains a list of configuration information about the user managed interfaces. |
| 1.3.6.1.4.1.2281.10.9.9.1.1.1 | ColumngenEquipInterfacesIfManagerifCascading | read-only | mandatory | The cascading state of the interface. |
| 1.3.6.1.4.1.2281.10.9.9.1.1.2 | ColumngenEquipInterfacesIfManagerifSecondaryOperStatus | read-only | mandatory | An additional information about the current operational state of the interface. |
| 1.3.6.1.4.1.2281.10.9.10 | NodegenEquipInterfacesCascading | |||
| 1.3.6.1.4.1.2281.10.9.10.1 | TablegenEquipInterfacesCascadingConfigurationTable | not-accessible | mandatory | Cascading Port Configuration Table. |
| 1.3.6.1.4.1.2281.10.9.10.1.1 | RowgenEquipInterfacesCascadingConfigurationEntry | not-accessible | mandatory | Cascading Port Configuration Table entry. |
| 1.3.6.1.4.1.2281.10.9.10.1.1.1 | ColumngenEquipInterfacesCascadingConfigurationIfindex | read-only | mandatory | Cascading port if-index table key. |
| 1.3.6.1.4.1.2281.10.9.10.1.1.2 | ColumngenEquipInterfacesCascadingConfigurationCascading | read-write | mandatory | Indicates if the port is cascading or not. |
| 1.3.6.1.4.1.2281.10.9.11 | NodegenEquipInterfacesStm1Rst | |||
| 1.3.6.1.4.1.2281.10.9.11.1 | TablegenEquipInterfacesStm1RstConfigTable | not-accessible | mandatory | STM-1/OC-3 configuration table. |
| 1.3.6.1.4.1.2281.10.9.11.1.1 | RowgenEquipInterfacesStm1RstConfigEntry | not-accessible | mandatory | STM-1/OC-3 configuration table entry. |
| 1.3.6.1.4.1.2281.10.9.11.1.1.1 | ColumngenEquipInterfacesStm1RstConfigIfindex | read-only | mandatory | The interface index of the STM-1/OC-3 interface. |
| 1.3.6.1.4.1.2281.10.9.11.1.1.2 | ColumngenEquipInterfacesStm1RstConfigPort | read-write | mandatory | The port of the STM-1/OC-3 interface. |
| 1.3.6.1.4.1.2281.10.9.11.1.1.3 | ColumngenEquipInterfacesStm1RstConfigAdmin | read-write | mandatory | The Admin Sate of the STM-1/OC-3 interface. |
| 1.3.6.1.4.1.2281.10.9.11.1.1.4 | ColumngenEquipInterfacesStm1RstConfigMute | read-write | mandatory | The SFP Mute config of the STM-1/OC-3 interface. |
| 1.3.6.1.4.1.2281.10.9.11.2 | TablegenEquipInterfacesStm1RstStatusTable | not-accessible | mandatory | STM-1/OC-3 status table. |
| 1.3.6.1.4.1.2281.10.9.11.2.1 | RowgenEquipInterfacesStm1RstStatusEntry | not-accessible | mandatory | STM-1/OC-3 status table entry. |
| 1.3.6.1.4.1.2281.10.9.11.2.1.1 | ColumngenEquipInterfacesStm1RstStatusIfindex | read-only | mandatory | The interface index of the STM-1/OC-3 interface. |
| 1.3.6.1.4.1.2281.10.9.11.2.1.2 | ColumngenEquipInterfacesStm1RstStatusLoopbackTimer | read-write | mandatory | The port of the STM-1/OC-3 interface. |
| 1.3.6.1.4.1.2281.10.9.11.2.1.3 | ColumngenEquipInterfacesStm1RstStatusLoopbackType | read-write | mandatory | The loopback type of the STM-1/OC-3 interface. |
| 1.3.6.1.4.1.2281.10.9.11.2.1.4 | ColumngenEquipInterfacesStm1RstStatusOperstatus | read-only | mandatory | The operational status of the STM-1/OC-3 interface. |
| 1.3.6.1.4.1.2281.10.9.11.3 | TablegenEquipInterfacesStm1RstPrbsTable | not-accessible | mandatory | STM-1/OC-3 status table. |
| 1.3.6.1.4.1.2281.10.9.11.3.1 | RowgenEquipInterfacesStm1RstPrbsEntry | not-accessible | mandatory | STM-1/OC-3 status table entry. |
| 1.3.6.1.4.1.2281.10.9.11.3.1.1 | ColumngenEquipInterfacesStm1RstPrbsCheckLineClear | read-write | mandatory | The PRBS Checker Line Direction Reset counter of the STM-1/OC-3 interface. |
| 1.3.6.1.4.1.2281.10.9.11.3.1.2 | ColumngenEquipInterfacesStm1RstPrbsCheckLine | read-write | mandatory | The PRBS Checker Line Direction of the STM-1/OC-3 interface. |
| 1.3.6.1.4.1.2281.10.9.11.3.1.3 | ColumngenEquipInterfacesStm1RstPrbsCheckLineInv | read-write | mandatory | The PRBS Checker Line Direction of the STM-1/OC-3 interface. |
| 1.3.6.1.4.1.2281.10.9.11.3.1.4 | ColumngenEquipInterfacesStm1RstPrbsCheckLineStatus | read-write | mandatory | The PRBS Checker Line Direction Status of the STM-1/OC-3 interface. |
| 1.3.6.1.4.1.2281.10.9.11.3.1.5 | ColumngenEquipInterfacesStm1RstPrbsCheckLineTotErr | read-write | mandatory | The PRBS Checker Line Direction Total Error counter of the STM-1/OC-3 interface. |
| 1.3.6.1.4.1.2281.10.9.11.3.1.6 | ColumngenEquipInterfacesStm1RstPrbsCheckRadioClear | read-write | mandatory | The PRBS Checker Radio Direction Reset counter of the STM-1/OC-3 interface. |
| 1.3.6.1.4.1.2281.10.9.11.3.1.7 | ColumngenEquipInterfacesStm1RstPrbsCheckRadio | read-write | mandatory | The PRBS Checker Radio Direction of the STM-1/OC-3 interface. |
| 1.3.6.1.4.1.2281.10.9.11.3.1.8 | ColumngenEquipInterfacesStm1RstPrbsCheckRadioInv | read-write | mandatory | The PRBS Checker Radio Direction of the STM-1/OC-3 interface. |
| 1.3.6.1.4.1.2281.10.9.11.3.1.9 | ColumngenEquipInterfacesStm1RstPrbsCheckRadioStatus | read-write | mandatory | The PRBS Checker Radio Direction Status of the STM-1/OC-3 interface. |
| 1.3.6.1.4.1.2281.10.9.11.3.1.10 | ColumngenEquipInterfacesStm1RstPrbsCheckRadioTotErr | read-write | mandatory | The PRBS Checker Radio Direction Total Error counter of the STM-1/OC-3 interface. |
| 1.3.6.1.4.1.2281.10.9.11.3.1.11 | ColumngenEquipInterfacesStm1RstPrbsGenLine | read-write | mandatory | The PRBS Generator Line Direction of the STM-1/OC-3 interface. |
| 1.3.6.1.4.1.2281.10.9.11.3.1.12 | ColumngenEquipInterfacesStm1RstPrbsGenLineErrIns | read-write | mandatory | The PRBS Generator Line Direction Error Insert of the STM-1/OC-3 interface. |
| 1.3.6.1.4.1.2281.10.9.11.3.1.13 | ColumngenEquipInterfacesStm1RstPrbsGenLineInv | read-write | mandatory | The PRBS Generator Line Direction of the STM-1/OC-3 interface. |
| 1.3.6.1.4.1.2281.10.9.11.3.1.14 | ColumngenEquipInterfacesStm1RstPrbsGenRadio | read-write | mandatory | The PRBS Generator Radio Direction of the STM-1/OC-3 interface. |
| 1.3.6.1.4.1.2281.10.9.11.3.1.15 | ColumngenEquipInterfacesStm1RstPrbsGenRadioErrIns | read-write | mandatory | The PRBS Generator Radio Direction Error Insert of the STM-1/OC-3 interface. |
| 1.3.6.1.4.1.2281.10.9.11.3.1.16 | ColumngenEquipInterfacesStm1RstPrbsGenRadioInv | read-write | mandatory | The PRBS Generator Radio Direction of the STM-1/OC-3 interface. |
| 1.3.6.1.4.1.2281.11 | NodegenTraps | |||
| 1.3.6.1.4.1.2281.11.1 | NotificationgeneralV3Trap | current | General network V3 trap | |
| 1.3.6.1.4.1.2281.11.2 | NotificationeventV3Trap | current | Event network V3 trap | |
| 1.3.6.1.4.1.2281.11.3 | NotificationheartbeatV3Trap | current | Heartbeat v3 trap - The heartbeat trap, sent once per heartbeat period | |
| 1.3.6.1.4.1.2281.11.4 | Notificationeventv3TrapSTP | current | STP trap. (1) The description field shows show the descriptions of the event STP event - on port: <port>, root id: <root id>, Bridge role: <bridge role>, Role:… | |
| 1.3.6.1.4.1.2281.11.2000 | NotificationgeneralNGV3Trap | current | NG General network V3 trap | |
| 1.3.6.1.4.1.2281.11.2001 | NotificationheartbeatNGV3Trap | current | NG Heartbeat v3 trap - The heartbeat trap, sent once per heartbeat period | |
| 1.3.6.1.4.1.2281.1001 | NodealarmTrap | Alarm network trap | ||
| 1.3.6.1.4.1.2281.1002 | NodeeventTrap | Event network trap | ||
| 1.3.6.1.4.1.2281.1003 | NodeheartbeatTrap | The heartbeat trap, sent once per heartbeat period | ||
| 1.3.6.1.4.1.2281.1004 | NodeeventTrapSTP | STP trap. (1) The description field shows show the descriptions of the event STP event - on port: <port>, root id: <root id>, Bridge role: <bridge role>, Role:… |