MWRM-RADIO-MIB
499 objects
No module-level DESCRIPTION found.
Imported Objects
| MWRM-UNIT-MIB | AllowedNotAllowed BerLevel ClockSrc DownUp EnableDisable EnableDisableSMI2 GreenYellow HalfFull InputSeverity Integrity LoopbackType MetricImperial NoYes OffOn PmTableType ProgressStatus QueueName RadioId RateMbps RfuId Severity SignalLevel SlotId SupportedNotsupported SwCommand SwCommandTimer TrailIfType TrailProtectedType |
| RFC1213-MIB | DisplayString |
| SNMPv2-SMI | enterprises IpAddress OBJECT-TYPE |
| SNMPv2-TC | MacAddress RowStatus |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.2281 | Nodemicrowave-radio | |||
| 1.3.6.1.4.1.2281.10 | NodegenEquip | |||
| 1.3.6.1.4.1.2281.10.1 | NodegenEquipUnit | |||
| 1.3.6.1.4.1.2281.10.5 | NodegenEquipRFU | |||
| 1.3.6.1.4.1.2281.10.5.1 | TablegenEquipRfuStatusTable | not-accessible | mandatory | This table indicates the RFU Status Data. |
| 1.3.6.1.4.1.2281.10.5.1.1 | RowgenEquipRfuStatusEntry | not-accessible | mandatory | Entry containing the data of the RFU. |
| 1.3.6.1.4.1.2281.10.5.1.1.1 | ColumngenEquipRfuStatusId | read-only | mandatory | This value indicates an index of a specific RFU |
| 1.3.6.1.4.1.2281.10.5.1.1.2 | ColumngenEquipRfuStatusRxLevel | read-only | mandatory | This value indicates the RFU Receive Level Status. |
| 1.3.6.1.4.1.2281.10.5.1.1.3 | ColumngenEquipRfuStatusTxLevel | read-only | mandatory | This value indicates the RFU Transmit Level Status. |
| 1.3.6.1.4.1.2281.10.5.1.1.4 | ColumngenEquipRfuStatusTemperature | read-only | mandatory | This value indicates the RFU temperature. The value depends on the represented measurement system. with genEquipUnitMeasurementSystem parameter. |
| 1.3.6.1.4.1.2281.10.5.1.1.5 | ColumngenEquipRfuStatusRunningVersion | read-only | mandatory | This value indicates the running SW version on the RFU. |
| 1.3.6.1.4.1.2281.10.5.1.1.6 | ColumngenEquipRfuStatusRFUType | read-only | mandatory | The different types of the supported RFUs |
| 1.3.6.1.4.1.2281.10.5.1.1.7 | ColumngenEquipRfuStatusRFUGrade | read-only | mandatory | The grade of the RFU |
| 1.3.6.1.4.1.2281.10.5.1.1.8 | ColumngenEquipRfuStatusTxRxFreqSeparation | read-only | mandatory | Tx to Rx frequency separation (MHz), For some RFUs the user cannot set the Tx and Rx frequencies separately (one of them affects the other one's value). |
| 1.3.6.1.4.1.2281.10.5.1.1.9 | ColumngenEquipRfuStatusRFUMode | read-only | mandatory | IF combining parameter - The mode of the RFU |
| 1.3.6.1.4.1.2281.10.5.1.1.10 | ColumngenEquipRfuStatusRxLevelDiversity | read-only | mandatory | IF combining parameter - The Rx Diversity level (dBm) |
| 1.3.6.1.4.1.2281.10.5.1.1.11 | ColumngenEquipRfuStatusRxLevelCombined | read-only | mandatory | IF combining parameter - The Rx Combined level (dBm) |
| 1.3.6.1.4.1.2281.10.5.1.1.12 | ColumngenEquipRfuStatusAutoDelayCalStatus | read-only | mandatory | IF combining parameter - the automatic delay calibration status. Supported only for specific RFUs. |
| 1.3.6.1.4.1.2281.10.5.1.1.13 | ColumngenEquipRfuStatusRFUSerialNumber | read-only | mandatory | RFU Serial number. |
| 1.3.6.1.4.1.2281.10.5.1.1.14 | ColumngenEquipRfuStatusRFUPartNumber | read-only | mandatory | RFU Part number. |
| 1.3.6.1.4.1.2281.10.5.1.1.15 | ColumngenEquipRfuStatusRFUmateCarrier | read-only | mandatory | The returned value indicates the slot number of the 'copartner RFU-D carrier'. The returned value will be '-1' when the RFU is not RFU-D, or if the 'copartner … |
| 1.3.6.1.4.1.2281.10.5.1.1.16 | ColumngenEquipRfuStatusRFUMaxTxFreq | read-only | mandatory | The maximum Tx frequency of the RFU that is allowed by the RFU. |
| 1.3.6.1.4.1.2281.10.5.1.1.17 | ColumngenEquipRfuStatusRFUMinTxFreq | read-only | mandatory | The minimum Tx frequency of the RFU that is allowed by the RFU. |
| 1.3.6.1.4.1.2281.10.5.1.1.18 | ColumngenEquipRfuStatusRFUMaxRxFreq | read-only | mandatory | The maximum Rx frequency of the RFU that is allowed by the RFU. |
| 1.3.6.1.4.1.2281.10.5.1.1.19 | ColumngenEquipRfuStatusRFUMinRxFreq | read-only | mandatory | The minimum Rx frequency of the RFU that is allowed by the RFU. |
| 1.3.6.1.4.1.2281.10.5.1.1.20 | ColumngenEquipRfuStatusInstallation | read-only | mandatory | Returns 'all-indoor' or 'split' according to the RFU installation. |
| 1.3.6.1.4.1.2281.10.5.1.1.21 | ColumngenEquipRfuStatusDataSciErrors | read-only | mandatory | Data Sci Errors |
| 1.3.6.1.4.1.2281.10.5.1.1.22 | ColumngenEquipRfuStatusDeviceError | read-only | mandatory | Status Device Error |
| 1.3.6.1.4.1.2281.10.5.1.1.23 | ColumngenEquipRfuStatusBand | read-only | mandatory | The Band of the RF-Module in GHz |
| 1.3.6.1.4.1.2281.10.5.1.1.24 | ColumngenEquipRfuStatusPATemp | read-only | mandatory | The measured temperature in celsius of the PA (Power Amplifier) of the RF module |
| 1.3.6.1.4.1.2281.10.5.1.1.25 | ColumngenEquipRfuStatusTxMute | read-only | mandatory | The mute status, whether it is on (mute) or off (un-mute) of the RF-Module |
| 1.3.6.1.4.1.2281.10.5.1.1.26 | ColumngenEquipRfuStatusMinTxLevel | read-only | mandatory | The minimum feasible TX signal level (TSL) in dBm of the RF-Module |
| 1.3.6.1.4.1.2281.10.5.1.1.27 | ColumngenEquipRfuStatusMaxTxLevel | read-only | mandatory | The maximum feasible TX signal level (TSL) in dBm of the RF-Module |
| 1.3.6.1.4.1.2281.10.5.1.1.28 | ColumngenEquipRfuStatusMinBW | read-only | mandatory | The minimum supported bandwidth in KHz of the RF-Module |
| 1.3.6.1.4.1.2281.10.5.1.1.29 | ColumngenEquipRfuStatusMaxBW | read-only | mandatory | The maximum supported bandwidth in KHz of the RF-Module |
| 1.3.6.1.4.1.2281.10.5.1.1.30 | ColumngenEquipRfuStatusCommunication | read-only | mandatory | The communication status between the host and the RFU |
| 1.3.6.1.4.1.2281.10.5.1.1.31 | ColumngenEquipRfuCfgATPCOverrideTimerState | read-only | mandatory | Returns the state of the ATPC 'override timer', whether it is regular or expired |
| 1.3.6.1.4.1.2281.10.5.1.1.32 | ColumngenEquipRfuStatusIfCombSupport | read-only | mandatory | Indicates if the IF-Combiner function is supported |
| 1.3.6.1.4.1.2281.10.5.1.1.33 | ColumngenEquipRfuStatusMinRxLevel | read-only | mandatory | The minimum feasible RX signal level (RSL) in dBm of the RF-Module |
| 1.3.6.1.4.1.2281.10.5.1.1.34 | ColumngenEquipRfuStatusMaxRxLevel | read-only | mandatory | The maximum feasible RX signal level (RSL) in dBm of the RF-Module |
| 1.3.6.1.4.1.2281.10.5.2 | TablegenEquipRfuCfgTable | not-accessible | mandatory | This table indicates the RFU Configuration. |
| 1.3.6.1.4.1.2281.10.5.2.1 | RowgenEquipRfuCfgEntry | not-accessible | mandatory | This table indicates the RFU Configuration. |
| 1.3.6.1.4.1.2281.10.5.2.1.1 | ColumngenEquipRfuCfgId | read-only | mandatory | This value indicates an index of a specific RFU |
| 1.3.6.1.4.1.2281.10.5.2.1.2 | ColumngenEquipRfuCfgMaxTxLevel | read-write | mandatory | This value indicates the RFU Maximum Transmit Level Configuration. |
| 1.3.6.1.4.1.2281.10.5.2.1.3 | ColumngenEquipRfuCfgTxFreq | read-write | mandatory | Tx Frequency configuration (Mhz) |
| 1.3.6.1.4.1.2281.10.5.2.1.4 | ColumngenEquipRfuCfgRxFreq | read-write | mandatory | Rx Frequency configuration (Mhz) |
| 1.3.6.1.4.1.2281.10.5.2.1.5 | ColumngenEquipRfuCfgATPCAdmin | read-write | mandatory | ATPC configuration - Admin mode Possible values: - enable(2) - disable(3) |
| 1.3.6.1.4.1.2281.10.5.2.1.6 | ColumngenEquipRfuCfgATPCRefRSL | read-write | mandatory | ATPC configuration - reference RSL level (dBm) |
| 1.3.6.1.4.1.2281.10.5.2.1.7 | ColumngenEquipRfuCfgMuteTx | read-write | mandatory | The required TX mute status of the RF-Module |
| 1.3.6.1.4.1.2281.10.5.2.1.8 | ColumngenEquipRfuCfgRSLConnSrc | read-write | mandatory | IF combining - RFU RSL (Received Signal Level) connector source |
| 1.3.6.1.4.1.2281.10.5.2.1.9 | ColumngenEquipRfuCfgDelayCal | read-write | mandatory | IF combining - Delay calibration |
| 1.3.6.1.4.1.2281.10.5.2.1.10 | ColumngenEquipRfuCfgLoopback | read-write | mandatory | RFU RF loopback command |
| 1.3.6.1.4.1.2281.10.5.2.1.11 | ColumngenEquipRfuCfgLogAdmin | read-write | mandatory | RFU internal log file admin Possible values: - enable(2) - disable(3) |
| 1.3.6.1.4.1.2281.10.5.2.1.12 | ColumngenEquipRfuCfgClearComDeviceError | read-write | mandatory | Clear Com device Error. |
| 1.3.6.1.4.1.2281.10.5.2.1.13 | ColumngenEquipRfuCfgGreenModeAdmin | read-write | mandatory | Enables/disables RFU green mode. This mode will minimize power consumption while ensuring the highest transmission power possible to get an RSL not higher than… |
| 1.3.6.1.4.1.2281.10.5.2.1.14 | ColumngenEquipRfuCfgGreenModeReferenceLevel | read-write | mandatory | RSL reference level (in dB) for green mode operation |
| 1.3.6.1.4.1.2281.10.5.2.1.15 | ColumngenEquipRfuCfgATPCOverrideTxLevel | read-write | mandatory | This parameter configures the default transmission signal level in case of ATPC override due to expiration of maximum power timer as defined in genEquipRfuCfgA… |
| 1.3.6.1.4.1.2281.10.5.2.1.16 | ColumngenEquipRfuCfgATPCOverrideTimeout | read-write | mandatory | This parameter configures the timer to be counted while in ATPC in case of maximum power transmission. If this timer expires, the system will transmit at a def… |
| 1.3.6.1.4.1.2281.10.5.2.1.17 | ColumngenEquipRfuCfgATPCOverrideTimerCounter | read-only | mandatory | This parameter shows the time left in the timer defined by genEquipRfuCfgATPCOverrideTxLevel |
| 1.3.6.1.4.1.2281.10.5.2.1.18 | ColumngenEquipRfuCfgATPCOverrideTimerCancel | read-write | mandatory | Setting this parameter to ON will cancel the ATPC override mode. This will only be effective while in this mode i.e. the system had been transmitting at maximu… |
| 1.3.6.1.4.1.2281.10.5.3 | TablegenEquipRfuUploadTable | not-accessible | mandatory | RFU Upload Data table. |
| 1.3.6.1.4.1.2281.10.5.3.1 | RowgenEquipRfuUploadEntry | not-accessible | mandatory | Entry containing the data of the RFU. |
| 1.3.6.1.4.1.2281.10.5.3.1.1 | ColumngenEquipRfuUploadId | read-only | mandatory | This value indicates an index of a specific RFU |
| 1.3.6.1.4.1.2281.10.5.3.1.2 | ColumngenEquipRfuUploadSwCommand | read-write | mandatory | This value initiates SW upload to the RFU. |
| 1.3.6.1.4.1.2281.10.5.3.1.3 | ColumngenEquipRfuUploadSwStatus | read-only | mandatory | This value indicates the status of the SW load operation on the RFU. |
| 1.3.6.1.4.1.2281.10.5.3.1.4 | ColumngenEquipRfuUploadCounter | read-only | mandatory | This parameter shows the progress (in blocks) of RFU software download |
| 1.3.6.1.4.1.2281.10.5.4 | NodegenEquipRFUNG | |||
| 1.3.6.1.4.1.2281.10.5.4.2 | TablegenEquipRfuSwInstallTable | not-accessible | mandatory | RFU software managemet install configuration. |
| 1.3.6.1.4.1.2281.10.5.4.2.1 | RowgenEquipRfuSwInstallEntry | not-accessible | mandatory | RFU software managemet install configuration. |
| 1.3.6.1.4.1.2281.10.5.4.2.1.1 | ColumngenEquipRfuSwInstallIfIndex | read-only | mandatory | RFU ifIndex |
| 1.3.6.1.4.1.2281.10.5.4.2.1.2 | ColumngenEquipRfuSwInstallOperation | read-write | mandatory | RFU software installation operation to be performed. |
| 1.3.6.1.4.1.2281.10.5.4.2.1.3 | ColumngenEquipRfuSwInstallTimedInstallation | read-write | mandatory | Determines whether the installation will be carried out after a configured timer. |
| 1.3.6.1.4.1.2281.10.5.4.2.1.4 | ColumngenEquipRfuSwInstallTimer | read-write | mandatory | Timer for timed installations |
| 1.3.6.1.4.1.2281.10.5.4.3 | TablegenEquipRfuInstalledVersionsTable | not-accessible | mandatory | RFU software managemet installed versuion. |
| 1.3.6.1.4.1.2281.10.5.4.3.1 | RowgenEquipRfuInstalledVersionsEntry | not-accessible | mandatory | RFU software managemet installed version. |
| 1.3.6.1.4.1.2281.10.5.4.3.1.1 | ColumngenEquipRfuInstalledVersionsIfIndex | read-only | mandatory | RFU ifIndex |
| 1.3.6.1.4.1.2281.10.5.4.3.1.2 | ColumngenEquipRfuInstalledVersionsDSP | read-only | mandatory | RFU version DSP. |
| 1.3.6.1.4.1.2281.10.5.4.3.1.3 | ColumngenEquipRfuInstalledVersionsConfigurations | read-only | mandatory | Configuration tables. |
| 1.3.6.1.4.1.2281.10.5.4.3.1.4 | ColumngenEquipRfuInstalledVersionsConstants | read-only | mandatory | Constant tables |
| 1.3.6.1.4.1.2281.10.5.4.3.1.5 | ColumngenEquipRfuInstalledVersionsScripts | read-only | mandatory | RFU scripts |
| 1.3.6.1.4.1.2281.10.5.4.3.1.6 | ColumngenEquipRfuInstalledVersionsFirmware | read-only | mandatory | Firmware |
| 1.3.6.1.4.1.2281.10.5.4.4 | TablegenEquipRfuSwStatusTable | not-accessible | mandatory | RFU software managemet installed status. |
| 1.3.6.1.4.1.2281.10.5.4.4.1 | RowgenEquipRfuSwStatusEntry | not-accessible | mandatory | RFU software managemet installed status. |
| 1.3.6.1.4.1.2281.10.5.4.4.1.1 | ColumngenEquipRfuSwStatusIfIndex | read-only | mandatory | RFU ifIndex |
| 1.3.6.1.4.1.2281.10.5.4.4.1.2 | ColumngenEquipRfuSwStatusCurrentState | read-only | mandatory | Current state of the install operation. |
| 1.3.6.1.4.1.2281.10.5.4.4.1.3 | ColumngenEquipRfuSwStatusProgress | read-only | mandatory | Progress of the current install operation in percentage. |
| 1.3.6.1.4.1.2281.10.5.4.5 | TablegenEquipRfuRunningVersionsTable | not-accessible | mandatory | RFU software managemet rinning versions. |
| 1.3.6.1.4.1.2281.10.5.4.5.1 | RowgenEquipRfuRunningVersionsEntry | not-accessible | mandatory | RFU software managemet running versions. |
| 1.3.6.1.4.1.2281.10.5.4.5.1.1 | ColumngenEquipRfuRunningVersionsIfIndex | read-only | mandatory | RFU ifIndex |
| 1.3.6.1.4.1.2281.10.5.4.5.1.2 | ColumngenEquipRfuRunningVersionsDSP | read-only | mandatory | DSP. |
| 1.3.6.1.4.1.2281.10.5.4.5.1.3 | ColumngenEquipRfuRunningVersionsConfigurations | read-only | mandatory | Configuration tables. |
| 1.3.6.1.4.1.2281.10.5.4.5.1.4 | ColumngenEquipRfuRunningVersionsConstants | read-only | mandatory | Constant tables. |
| 1.3.6.1.4.1.2281.10.5.4.5.1.5 | ColumngenEquipRfuRunningVersionsScripts | read-only | mandatory | RFU scripts. |
| 1.3.6.1.4.1.2281.10.5.4.5.1.6 | ColumngenEquipRfuRunningVersionsFirmware | read-only | mandatory | Firmware. |
| 1.3.6.1.4.1.2281.10.5.4.6 | TablegenEquipRfuAvailableVersionsTable | not-accessible | mandatory | RFU software managemet available versions. |
| 1.3.6.1.4.1.2281.10.5.4.6.1 | RowgenEquipRfuAvailableVersionsEntry | not-accessible | mandatory | RFU software managemet available versions. |
| 1.3.6.1.4.1.2281.10.5.4.6.1.1 | ColumngenEquipRfuAvailableVersionsRfuType | read-only | mandatory | RFU Type |
| 1.3.6.1.4.1.2281.10.5.4.6.1.2 | ColumngenEquipRfuAvailableVersionsDSP | read-only | mandatory | DSP. |
| 1.3.6.1.4.1.2281.10.5.4.6.1.3 | ColumngenEquipRfuAvailableVersionsConfigurations | read-only | mandatory | Configuration tables. |
| 1.3.6.1.4.1.2281.10.5.4.6.1.4 | ColumngenEquipRfuAvailableVersionsConstants | read-only | mandatory | Constant tables. |
| 1.3.6.1.4.1.2281.10.5.4.6.1.5 | ColumngenEquipRfuAvailableVersionsScripts | read-only | mandatory | RFU scripts. |
| 1.3.6.1.4.1.2281.10.5.4.6.1.6 | ColumngenEquipRfuAvailableVersionsFirmware | read-only | mandatory | Firmware. |
| 1.3.6.1.4.1.2281.10.7 | NodegenEquipRadio | |||
| 1.3.6.1.4.1.2281.10.7.1 | TablegenEquipRadioStatusTable | not-accessible | mandatory | Radio status table |
| 1.3.6.1.4.1.2281.10.7.1.1 | RowgenEquipRadioStatusEntry | not-accessible | mandatory | Radio status table |
| 1.3.6.1.4.1.2281.10.7.1.1.1 | ColumngenEquipRadioStatusRadioId | read-only | mandatory | This value is the radio ID that serves as the table Index. |
| 1.3.6.1.4.1.2281.10.7.1.1.2 | ColumngenEquipRadioStatusMSE | read-only | mandatory | MSE (Mean Square Error) of the Rx signal (measured in dB * 100). -9900 value (-99.00 dB) means that the signal is not locked. ~ -3500 value (-35.00 dB) is a go… |
| 1.3.6.1.4.1.2281.10.7.1.1.3 | ColumngenEquipRadioStatusDefectedBlocks | read-only | mandatory | The number of counted defective radio blocks. |
| 1.3.6.1.4.1.2281.10.7.1.1.4 | ColumngenEquipRadioStatusBER | read-only | mandatory | The measured BER (Bit Error Rate) level of the modem. |
| 1.3.6.1.4.1.2281.10.7.1.1.5 | ColumngenEquipRadioStatusXPI | read-only | mandatory | XPI (Cross Polar Interference) level measured by the modem. |
| 1.3.6.1.4.1.2281.10.7.1.1.6 | ColumngenEquipRadioStatusXPICEnabled | read-only | mandatory | This parameter indicates whether an XPIC script is currently loaded. |
| 1.3.6.1.4.1.2281.10.7.2 | TablegenEquipRadioCfgTable | not-accessible | mandatory | Radio Configuration table. |
| 1.3.6.1.4.1.2281.10.7.2.1 | RowgenEquipRadioCfgEntry | not-accessible | mandatory | Radio Configuration table. |
| 1.3.6.1.4.1.2281.10.7.2.1.1 | ColumngenEquipRadioCfgRadioId | read-only | mandatory | This value is the radio ID that serves as this table Index |
| 1.3.6.1.4.1.2281.10.7.2.1.2 | ColumngenEquipRadioCfgLinkId | read-write | mandatory | Radio configuration link ID |
| 1.3.6.1.4.1.2281.10.7.2.1.3 | ColumngenEquipRadioCfgMACHeaderCompression | read-write | mandatory | The Admin state of the MAC header compression. |
| 1.3.6.1.4.1.2281.10.7.2.1.4 | ColumngenEquipRadioCfgClearCounters | read-write | mandatory | Setting this parameter to ON will clear the radio counters. |
| 1.3.6.1.4.1.2281.10.7.2.1.5 | ColumngenEquipRadioCfgIfLoopback | read-write | mandatory | The administrative state of the IF loopback. |
| 1.3.6.1.4.1.2281.10.7.2.1.6 | ColumngenEquipRadioCfgExcessiveBERThreshold | read-write | mandatory | The BER threshold that when exceeded will be considered as 'Excessive BER'. |
| 1.3.6.1.4.1.2281.10.7.2.1.7 | ColumngenEquipRadioCfgSignalDegradeThreshold | read-write | mandatory | The BER (Bit Error Rate) threshold that when exceeded will be considered as 'Signal Degrade'. |
| 1.3.6.1.4.1.2281.10.7.2.1.8 | ColumngenEquipRadioCfgRadioAdmin | read-write | obsolete | Radio Admin state (Enable,Disable) can be used in ifTable::ifAdminStatus |
| 1.3.6.1.4.1.2281.10.7.2.1.9 | ColumngenEquipRadioCfgRadioOperationalStatus | read-only | mandatory | The operational status of the radio interface. |
| 1.3.6.1.4.1.2281.10.7.2.1.10 | ColumngenEquipRadioCfgRadioTrafficPriorityScheme | read-write | mandatory | this parameter configures the relative priority of different traffic streams. High-tdm-over-high-ethernet gives priorities as follows: (1) TDM high priority (2… |
| 1.3.6.1.4.1.2281.10.7.2.1.11 | ColumngenEquipRadioCfgRadioHiPriorityEthernetBW | read-write | mandatory | this parameter configures the amount of bandwith reserved for high-priority Ethernet. It must be a number in resolution of 2.048 Mbit/s for E1 systems or 1.544… |
| 1.3.6.1.4.1.2281.10.7.2.1.12 | ColumngenEquipRadioCfgRadioMultiRadioEnable | read-write | mandatory | this parameter enables/disables the multi-radio feature for this radio. Notice that for the feature to work it must be configured in two adjacent radios (odd a… |
| 1.3.6.1.4.1.2281.10.7.2.1.13 | ColumngenEquipRadioCfgRadioMultiRadioBlockLocalTraffic | read-write | mandatory | this parameter allows stopping distribution of data to different radios in Multi-Radio mode for debugging purposes |
| 1.3.6.1.4.1.2281.10.7.2.1.14 | ColumngenEquipRadioCfgRadioMultiRadioBlockMateTraffic | read-write | mandatory | this parameter allows stopping distribution of data to the radio in the mate IDU in Multi-Radio mode for debugging purposes |
| 1.3.6.1.4.1.2281.10.7.2.1.15 | ColumngenEquipRadioCfgRadioCurrentAvailableCapacity | read-only | mandatory | This parameter indicates the maximum possible capacity available for Ethernet. This sets a top limit for amount of high-priority Ethernet bandwidth |
| 1.3.6.1.4.1.2281.10.7.2.1.16 | ColumngenEquipRadioCfgRadioMultiRadioExcessiveBERAdmin | read-write | mandatory | This parameter configures whether in Multi-Radio mode data stops being distributed to the radio in case of an excessive BER condition |
| 1.3.6.1.4.1.2281.10.7.2.1.17 | ColumngenEquipRadioCfgRadioMultiRadioSignalDegradeAdmin | read-write | mandatory | This parameter configures whether in Multi-Radio mode data stops being distributed to the radio in case of a signal degraded condition |
| 1.3.6.1.4.1.2281.10.7.2.1.18 | ColumngenEquipRadioCfgEnAlarmGenOnRslDegrade | read-write | mandatory | TEnable/Disable alarm and trapgeneration on RSL degradationbelow user defined threshold.If enabled, trap and alarm willbe generated when current RSLlevel degra… |
| 1.3.6.1.4.1.2281.10.7.2.1.19 | ColumngenEquipRadioCfgAlarmGenRslNominalLevel | read-write | mandatory | RSL nominal level [in dBm] foralarm and event generation. |
| 1.3.6.1.4.1.2281.10.7.2.1.20 | ColumngenEquipRadioCfgAlarmGenRslDegradationMargin | read-write | mandatory | RSL degradation margin [in dB]for alarm and eventgeneration. The margin isrelative to the nominal RSLlevel |
| 1.3.6.1.4.1.2281.10.7.2.1.21 | ColumngenEquipRadioCfgLinkShutDownOnRadioFailure | read-write | mandatory | This parameter enables shutting down the link and initiating automatic state propagation upon a failure in each one of the radios. Radio failure condition is d… |
| 1.3.6.1.4.1.2281.10.7.2.1.22 | ColumngenEquipRadioCfgLoopbackTimeout | read-write | mandatory | The timeout in minutes for automatic termination of the loopback. The value '0' refers to 'no timeout'. |
| 1.3.6.1.4.1.2281.10.7.2.1.23 | ColumngenEquipRadioCfgAbcMode | read-write | mandatory | TThe radio mode (multi direction or multi carrier). |
| 1.3.6.1.4.1.2281.10.7.3 | NodegenEquipRemoteRadio | |||
| 1.3.6.1.4.1.2281.10.7.3.1 | TablegenEquipRemoteRadioTable | not-accessible | mandatory | Remote radio table. |
| 1.3.6.1.4.1.2281.10.7.3.1.1 | RowgenEquipRemoteRadioEntry | not-accessible | mandatory | Remote radio table. |
| 1.3.6.1.4.1.2281.10.7.3.1.1.1 | ColumngenEquipRemoteRadioRadioId | read-only | mandatory | This value is the radio ID that serves as this table Index |
| 1.3.6.1.4.1.2281.10.7.3.1.1.2 | ColumngenEquipRemoteRadioRemoteCommunication | read-only | mandatory | The operational status of the remote radio. |
| 1.3.6.1.4.1.2281.10.7.3.1.1.3 | ColumngenEquipRemoteRadioRemoteIPAddr | read-write | mandatory | The remote Ip address. |
| 1.3.6.1.4.1.2281.10.7.3.1.1.4 | ColumngenEquipRemoteRadioRemoteRxLevel | read-only | mandatory | The Rx level of the remote radio (in dBm) |
| 1.3.6.1.4.1.2281.10.7.3.1.1.5 | ColumngenEquipRemoteRadioRemoteForceMaxTxLevel | read-write | mandatory | Command that forces the remote radio maximum Tx level (in dBm) |
| 1.3.6.1.4.1.2281.10.7.3.1.1.6 | ColumngenEquipRemoteRadioRemoteTxFreq | read-write | mandatory | The remote radio Tx frequancy (in MHz). |
| 1.3.6.1.4.1.2281.10.7.3.1.1.7 | ColumngenEquipRemoteRadioRemoteRxFreq | read-write | mandatory | The remote radio Rx frequancy (in MHz). |
| 1.3.6.1.4.1.2281.10.7.3.1.1.8 | ColumngenEquipRemoteRadioRemoteATPCReferenceRxLevel | read-write | mandatory | The RSL reference level for the ATPC mechanism in the remote radio. |
| 1.3.6.1.4.1.2281.10.7.3.1.1.9 | ColumngenEquipRemoteRadioRemoteFloatingIPAddr | read-write | mandatory | This value indicates the floating IP address used in the remote shelf if its main units are in 1+1 protection mode. |
| 1.3.6.1.4.1.2281.10.7.3.1.1.10 | ColumngenEquipRemoteRadioRemoteDefaultGateway | read-only | mandatory | Default gateway of remote NE (Network Element) across this radio link. |
| 1.3.6.1.4.1.2281.10.7.3.1.1.11 | ColumngenEquipRemoteRadioRemoteMostSevereAlarm | read-only | mandatory | Most severe alarm of remote NE (Network Element) across this radio link. |
| 1.3.6.1.4.1.2281.10.7.3.1.1.12 | ColumngenEquipRemoteRadioRemoteSubnetMask | read-only | mandatory | Subnet mask of remote NE (Network Element) across this radio link. |
| 1.3.6.1.4.1.2281.10.7.3.1.1.13 | ColumngenEquipRemoteRadioRemoteSlotID | read-only | mandatory | The remote radio slot number. |
| 1.3.6.1.4.1.2281.10.7.3.1.1.14 | ColumngenEquipRemoteRadioRemoteForceTxMute | read-write | mandatory | Force the mute state of the remote unit radio interface. |
| 1.3.6.1.4.1.2281.10.7.3.1.1.15 | ColumngenEquipRemoteRadioRemoteLinkId | read-write | mandatory | The Link Id of the remote unit radio interface. |
| 1.3.6.1.4.1.2281.10.7.3.1.1.16 | ColumngenEquipRemoteRadioRemoteATPCoverrideState | read-only | mandatory | Remote Radio ATPC Override Timer expire state. |
| 1.3.6.1.4.1.2281.10.7.3.1.1.17 | ColumngenEquipRemoteRadioRemoteATPCoverrideStateCancel | read-write | mandatory | his coomand cancel remote ATPC override state. |
| 1.3.6.1.4.1.2281.10.7.3.1.1.18 | ColumngenEquipRemoteRadioRemoteDataLoopBackAdmin | read-write | mandatory | Remote unit administrator state of data loopback. |
| 1.3.6.1.4.1.2281.10.7.3.1.1.19 | ColumngenEquipRemoteRadioRemoteDataLoopBackDuration | read-write | mandatory | Remote Data LoopBack Duration at remote unit[Minutes], zero for infinite loop back. |
| 1.3.6.1.4.1.2281.10.7.3.1.1.20 | ColumngenEquipRemoteRadioRemoteDataLoopBackSwitchAddress | read-write | mandatory | Remote Unit switch MAC DA. |
| 1.3.6.1.4.1.2281.10.7.3.1.1.21 | ColumngenEquipRemoteRadioRemoteGreenReferenceRxLevel | read-only | mandatory | Remote Radio Green RSL reference level[dBm]. |
| 1.3.6.1.4.1.2281.10.7.3.1.1.22 | ColumngenEquipRemoteRadioRemoteMNGvlan | read-write | mandatory | Remote Management Vlan. |
| 1.3.6.1.4.1.2281.10.7.3.1.1.23 | ColumngenEquipRemoteRadioRemoteReset | read-write | mandatory | Remote reset of unit. |
| 1.3.6.1.4.1.2281.10.7.3.1.1.24 | ColumngenEquipRemoteRadioRemoteGreenModeAdmin | read-write | mandatory | Remote Unit Tx Green Mode Admin. |
| 1.3.6.1.4.1.2281.10.7.3.1.1.25 | ColumngenEquipRemoteRadioRemoteWebProtocol | read-write | mandatory | Remote web protocol. |
| 1.3.6.1.4.1.2281.10.7.3.1.1.26 | ColumngenEquipRemoteRadioRemoteIPv6Addr | read-write | mandatory | Remote IPv6 Address. |
| 1.3.6.1.4.1.2281.10.7.3.1.1.27 | ColumngenEquipRemoteRadioRemotePrefixLength | read-write | mandatory | Remote IPv6 Subnet-Mask. |
| 1.3.6.1.4.1.2281.10.7.3.1.1.28 | ColumngenEquipRemoteRadioRemoteDefaultGatewayIpv6 | read-write | mandatory | Remote IPv6 Default Gateway. |
| 1.3.6.1.4.1.2281.10.7.3.1.1.29 | ColumngenEquipRemoteRadioRemoteResetSlot | read-write | mandatory | Remote Unit Reset Slot. |
| 1.3.6.1.4.1.2281.10.7.4 | NodegenEquipRadioMRMC | |||
| 1.3.6.1.4.1.2281.10.7.4.1 | TablegenEquipRadioMRMCTable | not-accessible | mandatory | MRMC stauts table (Multi rate multi constellation) |
| 1.3.6.1.4.1.2281.10.7.4.1.1 | RowgenEquipRadioMRMCEntry | not-accessible | mandatory | MRMC status table (Multi rate multi constellation) |
| 1.3.6.1.4.1.2281.10.7.4.1.1.1 | ColumngenEquipRadioMRMCRadioId | read-only | mandatory | This value is the radio ID that serves as this table Index |
| 1.3.6.1.4.1.2281.10.7.4.1.1.2 | ColumngenEquipRadioMRMCSelectedScriptIndex | read-write | mandatory | The index of the MRMC script. The description of the script located in the genEquipRadioMRMCScriptTable. |
| 1.3.6.1.4.1.2281.10.7.4.1.1.3 | ColumngenEquipRadioMRMCOccupidBandwidth | read-only | mandatory | The Occupid Bandwidth (in KHz). |
| 1.3.6.1.4.1.2281.10.7.4.1.1.4 | ColumngenEquipRadioMRMCOperMode | read-only | mandatory | The Mode of the MRMC script. |
| 1.3.6.1.4.1.2281.10.7.4.1.1.5 | ColumngenEquipRadioMRMCCurrTxProfile | read-only | mandatory | The Tx profile number. |
| 1.3.6.1.4.1.2281.10.7.4.1.1.6 | ColumngenEquipRadioMRMCCurrTxQAM | read-only | mandatory | The current Tx QAM (modulation). |
| 1.3.6.1.4.1.2281.10.7.4.1.1.7 | ColumngenEquipRadioMRMCCurrTxBitrate | read-only | mandatory | The current Tx bit rate (in Kbps) |
| 1.3.6.1.4.1.2281.10.7.4.1.1.8 | ColumngenEquipRadioMRMCCurrTxVc | read-only | mandatory | The current number of Tx TDM channels. |
| 1.3.6.1.4.1.2281.10.7.4.1.1.9 | ColumngenEquipRadioMRMCCurrRxProfile | read-only | mandatory | The current Rx profile number |
| 1.3.6.1.4.1.2281.10.7.4.1.1.10 | ColumngenEquipRadioMRMCCurrRxQAM | read-only | mandatory | The current Rx QAM (modulation). |
| 1.3.6.1.4.1.2281.10.7.4.1.1.11 | ColumngenEquipRadioMRMCCurrRxBitrate | read-only | mandatory | The current total Rx bit rate (in Kbps) |
| 1.3.6.1.4.1.2281.10.7.4.1.1.12 | ColumngenEquipRadioMRMCCurrRxVc | read-only | mandatory | The current number of Rx TDM channels. |
| 1.3.6.1.4.1.2281.10.7.4.1.1.13 | ColumngenEquipRadioMRMCCurrGrade | read-only | mandatory | The grade of the current script. |
| 1.3.6.1.4.1.2281.10.7.4.1.1.14 | ColumngenEquipRadioMRMCEnAlarmOnAcmProfileDegrade | read-write | mandatory | Enable/Disable event and trapgeneration on ACM profiledegrade. When enabled and ifcurrent radio script supports Adaptive Code Modulation(ACM) event and trap wi… |
| 1.3.6.1.4.1.2281.10.7.4.1.1.15 | ColumngenEquipRadioMRMCAlarmOnAcmProfileDegradeThreshold | read-write | mandatory | ACM profile threshold foralarm generation |
| 1.3.6.1.4.1.2281.10.7.4.2 | TablegenEquipRadioMRMCScriptTable | not-accessible | mandatory | The MRMC script table. |
| 1.3.6.1.4.1.2281.10.7.4.2.1 | RowgenEquipRadioMRMCScriptEntry | not-accessible | mandatory | The MRMC script table. |
| 1.3.6.1.4.1.2281.10.7.4.2.1.1 | ColumngenEquipRadioMRMCScriptRadioId | read-only | mandatory | This value is the radio ID that serves as this table Index |
| 1.3.6.1.4.1.2281.10.7.4.2.1.2 | ColumngenEquipRadioMRMCScriptIndex | read-only | mandatory | The index of the MRMC scripts. |
| 1.3.6.1.4.1.2281.10.7.4.2.1.3 | ColumngenEquipRadioMRMCScriptName | read-only | mandatory | The MRMC script name. |
| 1.3.6.1.4.1.2281.10.7.4.2.1.4 | ColumngenEquipRadioMRMCScriptOperMode | read-only | mandatory | The script operational mode. |
| 1.3.6.1.4.1.2281.10.7.4.2.1.5 | ColumngenEquipRadioMRMCScriptProfile | read-only | mandatory | The profile number of the script |
| 1.3.6.1.4.1.2281.10.7.4.2.1.6 | ColumngenEquipRadioMRMCScriptProfileBitrate | read-only | mandatory | The Bit rate of the MRMC profile (in Kbps). |
| 1.3.6.1.4.1.2281.10.7.4.2.1.7 | ColumngenEquipRadioMRMCScriptAdaptivePower | read-only | mandatory | 'Adaptive Power' option which is available only when operation mode is ACM-adaptive |
| 1.3.6.1.4.1.2281.10.7.4.2.1.8 | ColumngenEquipRadioMRMCScriptReference | read-only | mandatory | 'Reference Class' option which is available only when operation mode 'ACM-adaptive' AND 'Adaptive Power' are enabled. |
| 1.3.6.1.4.1.2281.10.7.4.2.1.9 | ColumngenEquipRadioMRMCScriptMinProfile | read-only | mandatory | 'Minimum Profile' option which is available only when operation mode 'ACM-adaptive' AND 'Adaptive Power' are enabled. It state the minimum profile level for th… |
| 1.3.6.1.4.1.2281.10.7.4.3 | TablegenEquipRadioMRMCFilteredTable | not-accessible | mandatory | Filtered MRMC scripts table. |
| 1.3.6.1.4.1.2281.10.7.4.3.1 | RowgenEquipRadioMRMCFilteredEntry | not-accessible | mandatory | List of the filtered MRMC scripts. |
| 1.3.6.1.4.1.2281.10.7.4.3.1.1 | ColumngenEquipRadioMRMCFilteredRadioId | read-only | mandatory | The index of the radio interface |
| 1.3.6.1.4.1.2281.10.7.4.3.1.2 | ColumngenEquipRadioMRMCFilteredScriptId | read-only | mandatory | The MRMC filtered script IDs that are available in the specific radio. |
| 1.3.6.1.4.1.2281.10.7.4.4 | TablegenEquipRadioMRMCProfileAttrTable | not-accessible | mandatory | MRMC profile attribute table. |
| 1.3.6.1.4.1.2281.10.7.4.4.1 | RowgenEquipRadioMRMCProfileAttrEntry | not-accessible | mandatory | MRMC script profile's attributes. |
| 1.3.6.1.4.1.2281.10.7.4.4.1.1 | ColumngenEquipRadioMRMCProfileAttrScriptId | read-only | mandatory | The index of the table |
| 1.3.6.1.4.1.2281.10.7.4.4.1.2 | ColumngenEquipRadioMRMCProfileAttrTxProfile | read-only | mandatory | The profile number of the TX channel. |
| 1.3.6.1.4.1.2281.10.7.4.4.1.3 | ColumngenEquipRadioMRMCProfileAttrRxProfile | read-only | mandatory | The profile number of the RX channel. |
| 1.3.6.1.4.1.2281.10.7.4.4.1.4 | ColumngenEquipRadioMRMCProfileAttrTxQAM | read-only | mandatory | Indicates the QAM level of the TX channel. |
| 1.3.6.1.4.1.2281.10.7.4.4.1.5 | ColumngenEquipRadioMRMCProfileAttrTxBitRate | read-only | mandatory | Indicates the TX bit-rate of the profile. |
| 1.3.6.1.4.1.2281.10.7.4.4.1.6 | ColumngenEquipRadioMRMCProfileAttrRxQAM | read-only | mandatory | Indicates the QAM level of the RX channel. |
| 1.3.6.1.4.1.2281.10.7.4.4.1.7 | ColumngenEquipRadioMRMCProfileAttrRxBitRate | read-only | mandatory | RX bit-rate of the profile. |
| 1.3.6.1.4.1.2281.10.7.4.5 | TablegenEquipRadioMRMCScriptAttrTable | not-accessible | mandatory | MRMC script attribute table. |
| 1.3.6.1.4.1.2281.10.7.4.5.1 | RowgenEquipRadioMRMCScriptAttrEntry | not-accessible | mandatory | MRMC script attributes. |
| 1.3.6.1.4.1.2281.10.7.4.5.1.1 | ColumngenEquipRadioMRMCScriptAttrScriptId | read-only | mandatory | The ID of the MRMC script. |
| 1.3.6.1.4.1.2281.10.7.4.5.1.2 | ColumngenEquipRadioMRMCScriptAttrScriptName | read-only | mandatory | The name that identifies the script. |
| 1.3.6.1.4.1.2281.10.7.4.5.1.3 | ColumngenEquipRadioMRMCScriptAttrSupportACM | read-only | mandatory | Indicates if the MRMC script supports ACM (Adaptive Coding Modulation) functionality |
| 1.3.6.1.4.1.2281.10.7.4.5.1.4 | ColumngenEquipRadioMRMCScriptAttrStandard | read-only | mandatory | The standard that the MRMC script is designed to comply with. |
| 1.3.6.1.4.1.2281.10.7.4.5.1.5 | ColumngenEquipRadioMRMCScriptAttrMultiCarrier | read-only | mandatory | Indicates whether the MRMC script support a single carrier or any kind of multi carrier. |
| 1.3.6.1.4.1.2281.10.7.4.5.1.6 | ColumngenEquipRadioMRMCScriptAttrAdjChannel | read-only | mandatory | Indicates whether the MRMC script supports adjacent channel |
| 1.3.6.1.4.1.2281.10.7.4.5.1.7 | ColumngenEquipRadioMRMCScriptAttrModScheme | read-only | mandatory | Indicates whether the MRMC script supports fixed or adaptive (ACM) modulation scheme. |
| 1.3.6.1.4.1.2281.10.7.4.5.1.8 | ColumngenEquipRadioMRMCScriptAttrSymmetry | read-only | mandatory | Indicates whether the MRMC script is designed to normal (symmetrical) BW or an Asymmetrical BW. |
| 1.3.6.1.4.1.2281.10.7.4.5.1.9 | ColumngenEquipRadioMRMCScriptAttrLatency | read-only | mandatory | The Latency level of the MRMC Script. |
| 1.3.6.1.4.1.2281.10.7.4.5.1.10 | ColumngenEquipRadioMRMCScriptAttrTxBW | read-only | mandatory | The TX channel bandwidth (channel spacing) of the MRMC script. |
| 1.3.6.1.4.1.2281.10.7.4.5.1.11 | ColumngenEquipRadioMRMCScriptAttrRxBW | read-only | mandatory | The RX channel bandwidth (channel spacing) of the MRMC script. |
| 1.3.6.1.4.1.2281.10.7.4.5.1.12 | ColumngenEquipRadioMRMCScriptAttrTxOccupiedBW | read-only | mandatory | The TX channel occupied bandwidth of the MRMC script. |
| 1.3.6.1.4.1.2281.10.7.4.5.1.13 | ColumngenEquipRadioMRMCScriptAttrRxOccupiedBW | read-only | mandatory | The RX channel occupied bandwidth of the MRMC script. |
| 1.3.6.1.4.1.2281.10.7.4.5.1.14 | ColumngenEquipRadioMRMCScriptAttrLinkGrade | read-only | mandatory | The link grade level that the MRMC script is designed to cope with. |
| 1.3.6.1.4.1.2281.10.7.4.5.1.15 | ColumngenEquipRadioMRMCScriptAttrDiffGrade | read-only | mandatory | The Differential grade level that the MRMC script is designed to cope with. |
| 1.3.6.1.4.1.2281.10.7.4.5.1.16 | ColumngenEquipRadioMRMCScriptAttrChannelBW | read-only | mandatory | The channel bandwidth (channel spacing) the MRMC script is designed to. |
| 1.3.6.1.4.1.2281.10.7.4.5.1.17 | ColumngenEquipRadioMRMCScriptAttrTxMaxProfile | read-only | mandatory | The maximum available TX profile of the MRMC script. |
| 1.3.6.1.4.1.2281.10.7.4.5.1.18 | ColumngenEquipRadioMRMCScriptAttrRxMaxProfile | read-only | mandatory | The maximum available RX profile of the MRMC script. |
| 1.3.6.1.4.1.2281.10.7.4.6 | TablegenEquipRadioMRMCConfigTable | not-accessible | mandatory | MRMC script configuration. |
| 1.3.6.1.4.1.2281.10.7.4.6.1 | RowgenEquipRadioMRMCConfigEntry | not-accessible | mandatory | The configured parameters of the MRMC script. |
| 1.3.6.1.4.1.2281.10.7.4.6.1.1 | ColumngenEquipRadioMRMCConfigRadioId | read-only | mandatory | The index of the MRMC Configuration Table. |
| 1.3.6.1.4.1.2281.10.7.4.6.1.2 | ColumngenEquipRadioMRMCConfigActiveScriptId | read-write | mandatory | The script ID of required MRMC script. |
| 1.3.6.1.4.1.2281.10.7.4.6.1.3 | ColumngenEquipRadioMRMCConfigStandbyScriptId | read-write | mandatory | The script ID which is in standby. |
| 1.3.6.1.4.1.2281.10.7.4.6.1.4 | ColumngenEquipRadioMRMCConfigOperMode | read-write | mandatory | The operational mode of the MRMC script, whether it is fixed or adaptive modulation functionality. |
| 1.3.6.1.4.1.2281.10.7.4.6.1.5 | ColumngenEquipRadioMRMCConfigMaxProfile | read-write | mandatory | The maximum profile which is required for the MRMC script |
| 1.3.6.1.4.1.2281.10.7.4.6.1.6 | ColumngenEquipRadioMRMCConfigMinProfile | read-write | mandatory | The minimum profile which is required for the MRMC script |
| 1.3.6.1.4.1.2281.10.7.4.6.1.7 | ColumngenEquipRadioMRMCConfigAdaptivePowerAdmin | read-write | mandatory | Enable or disable the adaptive power functionality during ACM operation. |
| 1.3.6.1.4.1.2281.10.7.4.6.1.8 | ColumngenEquipRadioMRMCConfigAdaptivePowerRefClass | read-write | mandatory | Determines the efficiency class for the adaptive power functionality in ACM operation. |
| 1.3.6.1.4.1.2281.10.7.5 | NodegenEquipRadioComp | |||
| 1.3.6.1.4.1.2281.10.7.5.1 | TablegenEquipRadioCompCfgTable | not-accessible | mandatory | Radio Compression table |
| 1.3.6.1.4.1.2281.10.7.5.1.1 | RowgenEquipRadioCompCfgEntry | not-accessible | mandatory | Radio Compression table |
| 1.3.6.1.4.1.2281.10.7.5.1.1.1 | ColumngenEquipRadioCompMode | read-write | mandatory | Setting Ethernet packet header & payload compression mode. In Enhanced mode packet header can be compressed up to L4 and data compression can be activated. Leg… |
| 1.3.6.1.4.1.2281.10.7.5.1.1.2 | ColumngenEquipRadioEnhHeaderCompAdmin | read-write | mandatory | Enable/Disable Enhanced Header compression. |
| 1.3.6.1.4.1.2281.10.7.5.1.1.3 | ColumngenEquipRadioEnhDataCompAdmin | read-write | mandatory | Enable/Disable Enhanced Data compression. |
| 1.3.6.1.4.1.2281.10.7.5.1.1.4 | ColumngenEquipRadioEnhHeaderCompMode | read-write | mandatory | Setting Enhanced Header Compression depth. |
| 1.3.6.1.4.1.2281.10.7.5.2 | TablegenEquipRadioCompStatusTable | not-accessible | mandatory | Radio Compression status table. |
| 1.3.6.1.4.1.2281.10.7.5.2.1 | RowgenEquipRadioCompStatusEntry | not-accessible | mandatory | Radio Compression status table. |
| 1.3.6.1.4.1.2281.10.7.5.2.1.1 | ColumngenEquipRadioCompOperationalState | read-only | mandatory | Current compression mode operational status. |
| 1.3.6.1.4.1.2281.10.7.5.3 | TablegenEquipRadioCompExclRulesTable | not-accessible | mandatory | Enhanced Header Compression excluding rules table. |
| 1.3.6.1.4.1.2281.10.7.5.3.1 | RowgenEquipRadioCompExclRulesEntry | not-accessible | mandatory | Enhanced Header Compression excluding rules table. |
| 1.3.6.1.4.1.2281.10.7.5.3.1.1 | ColumngenEquipRadioCompExclRuleId | read-only | mandatory | Excluding rule number index. |
| 1.3.6.1.4.1.2281.10.7.5.3.1.2 | ColumngenEquipRadioCompExclRuleType | read-write | mandatory | Add excluding rule for enhanced header compression. Excluding rule must have a number (rule-id), text description (rule-name) and excluding rule type whichcan … |
| 1.3.6.1.4.1.2281.10.7.5.3.1.3 | ColumngenEquipRadioCompExclRuleName | read-write | mandatory | Excluding rule name. User specified. |
| 1.3.6.1.4.1.2281.10.7.5.3.1.4 | ColumngenEquipRadioCompExclRuleValue | read-write | mandatory | Excluding rule value. For example: MAC address or Ethertype. |
| 1.3.6.1.4.1.2281.10.7.5.3.1.30 | ColumngenEquipRadioCompExclRuleRowStatus | read-write | mandatory | Row status for this table. |
| 1.3.6.1.4.1.2281.10.7.5.4 | NodegenEquipRadioCompNG | |||
| 1.3.6.1.4.1.2281.10.7.5.4.1 | TablegenEquipRadioCompNGCfgTable | not-accessible | mandatory | Radio Ethernet and compression config table |
| 1.3.6.1.4.1.2281.10.7.5.4.1.1 | RowgenEquipRadioCompNGCfgEntry | not-accessible | mandatory | Radio Ethernet and compression config table entry |
| 1.3.6.1.4.1.2281.10.7.5.4.1.1.1 | ColumngenEquipRadioCompNGCfgifIndex | read-write | mandatory | Interface Index. |
| 1.3.6.1.4.1.2281.10.7.5.4.1.1.2 | ColumngenEquipRadioHeaderCompNGCfgClearStats | read-write | mandatory | Clear counters on the radio port. This includes: compression counters, PTP optimized transport and cut-through counters. |
| 1.3.6.1.4.1.2281.10.7.5.4.1.1.3 | ColumngenEquipRadioHeaderCompNGCfgUserFlowType | read-write | mandatory | User configured flow type for enhanced HC. This flow type is used for statistics and performance evaluation of the enhanced HC. |
| 1.3.6.1.4.1.2281.10.7.5.4.1.1.4 | ColumngenEquipRadioHeaderCompNGCfgMode | read-write | mandatory | Legacy mode is compatible for old platforms. Disabled mode disables compression. Other modes specify compression depth. |
| 1.3.6.1.4.1.2281.10.7.5.4.1.1.5 | ColumngenEquipRadioCutThroughNGCfgMode | read-write | mandatory | Enable/Disable cut-through. |
| 1.3.6.1.4.1.2281.10.7.5.4.2 | TablegenEquipRadioCompNGExclRulesTable | not-accessible | mandatory | Enhanced HC excluding rules table |
| 1.3.6.1.4.1.2281.10.7.5.4.2.1 | RowgenEquipRadioCompNGExclRulesEntry | not-accessible | mandatory | Enhanced HC excluding rules table entry |
| 1.3.6.1.4.1.2281.10.7.5.4.2.1.1 | ColumngenEquipRadioCompNGExclRulesifIndex | read-only | mandatory | Interface Index. |
| 1.3.6.1.4.1.2281.10.7.5.4.2.1.2 | ColumngenEquipRadioCompNGExclRuleId | read-only | mandatory | Excluding rule number. |
| 1.3.6.1.4.1.2281.10.7.5.4.2.1.3 | ColumngenEquipRadioCompNGExclRuleName | read-only | mandatory | Excluding rule name. |
| 1.3.6.1.4.1.2281.10.7.5.4.2.1.4 | ColumngenEquipRadioCompNGExclRuleType | read-only | mandatory | Excluding rule type. Possible options are: DA MAC, SA MAC, VLAN(4 bytes), Ethertype or Flow type. |
| 1.3.6.1.4.1.2281.10.7.5.4.2.1.5 | ColumngenEquipRadioCompNGExclRuleValue | read-only | mandatory | Excluding rule value. The value may be MAC address, VLAN(4 bytes), Ethertype(2 bytes) or Flow type(1 byte). |
| 1.3.6.1.4.1.2281.10.7.5.4.3 | TablegenEquipRadioCutThroughNGCountersTable | not-accessible | mandatory | Port counters table |
| 1.3.6.1.4.1.2281.10.7.5.4.3.1 | RowgenEquipRadioCutThroughNGCountersEntry | not-accessible | mandatory | Port counters table entry |
| 1.3.6.1.4.1.2281.10.7.5.4.3.1.1 | ColumngenEquipRadioCutThroughNGCountersifIndex | read-only | mandatory | Interface Index. |
| 1.3.6.1.4.1.2281.10.7.5.4.3.1.2 | ColumngenEquipRadioCutThroughNGCountersRxFrames | read-only | mandatory | Counter of good cut-through bytes received. |
| 1.3.6.1.4.1.2281.10.7.5.4.3.1.3 | ColumngenEquipRadioCutThroughNGCountersRxBytes | read-only | mandatory | Counter of good cut-through bytes received. |
| 1.3.6.1.4.1.2281.10.7.5.4.3.1.4 | ColumngenEquipRadioCutThroughNGCountersTxFrames | read-only | mandatory | Counter of cut-through frames transmitted. |
| 1.3.6.1.4.1.2281.10.7.5.4.3.1.5 | ColumngenEquipRadioCutThroughNGCountersTxBytes | read-only | mandatory | Counter of cut-through bytes transmitted. |
| 1.3.6.1.4.1.2281.10.7.5.4.3.1.6 | ColumngenEquipRadioCutThroughNGCountersTotalRxFrames | read-only | mandatory | Counter of total good frames received on the port. |
| 1.3.6.1.4.1.2281.10.7.5.4.3.1.7 | ColumngenEquipRadioCutThroughNGCountersTotalRxBytes | read-only | mandatory | Counter of total good bytes received on the port. |
| 1.3.6.1.4.1.2281.10.7.5.4.3.1.8 | ColumngenEquipRadioCutThroughNGCountersTotalTxBytesOut | read-only | mandatory | Counter of total transmitted bytes. |
| 1.3.6.1.4.1.2281.10.7.5.4.3.1.9 | ColumngenEquipRadioCutThroughNGCountersTotalTxFrames | read-only | mandatory | Counter of total transmitted frames. |
| 1.3.6.1.4.1.2281.10.7.5.4.3.1.10 | ColumngenEquipRadioCutThroughNGCountersTotalTxIdleBytes | read-only | mandatory | Counter of total transmitted idle bytes. |
| 1.3.6.1.4.1.2281.10.7.5.4.3.1.11 | ColumngenEquipRadioCutThroughNGCountersTotalTxBytesIn | read-only | mandatory | Counter of total transmitted bytes. |
| 1.3.6.1.4.1.2281.10.7.5.4.4 | TablegenEquipRadioCompNGStatusTable | not-accessible | mandatory | Radio Ethernet and compression status table |
| 1.3.6.1.4.1.2281.10.7.5.4.4.1 | RowgenEquipRadioCompNGStatusEntry | not-accessible | mandatory | Radio Ethernet and compression status table entry |
| 1.3.6.1.4.1.2281.10.7.5.4.4.1.1 | ColumngenEquipRadioCompNGStatusifindex | read-only | mandatory | Interface location. |
| 1.3.6.1.4.1.2281.10.7.5.4.4.1.2 | ColumngenEquipRadioCompNGStatusOperationalState | read-only | mandatory | Header Compression operational state. |
| 1.3.6.1.4.1.2281.10.7.5.4.4.1.3 | ColumngenEquipRadioCompNGStatusType | read-only | mandatory | Header Compression type. |
| 1.3.6.1.4.1.2281.10.7.5.4.7 | TablegenEquipRadioCompNGCountersTable | not-accessible | mandatory | Enhanced HC counters table |
| 1.3.6.1.4.1.2281.10.7.5.4.7.1 | RowgenEquipRadioCompNGCountersEntry | not-accessible | mandatory | Enhanced HC counters table entry |
| 1.3.6.1.4.1.2281.10.7.5.4.7.1.1 | ColumngenEquipRadioCompNGCountersifIndex | read-only | mandatory | Interface location. |
| 1.3.6.1.4.1.2281.10.7.5.4.7.1.2 | ColumngenEquipRadioCompNGCountersHCInBytes | read-only | mandatory | Counter of bytes on the TX side before enhanced header compression. |
| 1.3.6.1.4.1.2281.10.7.5.4.7.1.3 | ColumngenEquipRadioCompNGCountersHCOutBytes | read-only | mandatory | Counter of bytes on the TX side compressed by enhanced header compression. |
| 1.3.6.1.4.1.2281.10.7.5.4.7.1.4 | ColumngenEquipRadioCompNGCountersHCCompFrm | read-only | mandatory | Counter of frames on the TX side compressed by enhanced header compression. |
| 1.3.6.1.4.1.2281.10.7.5.4.7.1.5 | ColumngenEquipRadioCompNGCountersHCFrmUncmpExclRule | read-only | mandatory | Counter of frames on the TX side not compressed by enhanced header compression due to excluding rules. |
| 1.3.6.1.4.1.2281.10.7.5.4.7.1.6 | ColumngenEquipRadioCompNGCountersHCFrmUcompInternal | read-only | mandatory | Counter of frames on the TX side not compressed by enhanced header compression due to other resons. |
| 1.3.6.1.4.1.2281.10.7.5.4.7.1.7 | ColumngenEquipRadioCompNGCountersHCLearningFrm | read-only | mandatory | Counter of learning frames transmitted by enhanced header compression. |
| 1.3.6.1.4.1.2281.10.7.5.4.7.1.8 | ColumngenEquipRadioCompNGCountersHCUserFlowTypeActiveFlows | read-only | mandatory | Number of enhanced HC active flows occupied by user selected flow type. |
| 1.3.6.1.4.1.2281.10.7.5.4.7.1.9 | ColumngenEquipRadioCompNGCountersHCTotalActiveFlows | read-only | mandatory | Number of enhanced HC active flows on the TX side. |
| 1.3.6.1.4.1.2281.10.7.6 | NodegenEquipRadioPtpTransport | |||
| 1.3.6.1.4.1.2281.10.7.6.1 | TablegenEquipRadioPtpTransportCfgTable | not-accessible | mandatory | PTP optimized transport channel configuration table. |
| 1.3.6.1.4.1.2281.10.7.6.1.1 | RowgenEquipRadioPtpTransportCfgEntry | not-accessible | mandatory | PTP optimized transport channel configuration table. |
| 1.3.6.1.4.1.2281.10.7.6.1.1.1 | ColumngenEquipRadioPtpTransportChannelAdmin | read-write | mandatory | PTP optimized transport admin. |
| 1.3.6.1.4.1.2281.10.7.6.1.1.2 | ColumngenEquipRadioPtpTransportChannelMode | read-write | mandatory | PTP optimized transport operational mode. |
| 1.3.6.1.4.1.2281.10.7.6.2 | TablegenEquipRadioPtpTransportCountersTable | not-accessible | mandatory | PTP optimized transport channel counters table. |
| 1.3.6.1.4.1.2281.10.7.6.2.1 | RowgenEquipRadioPtpTransportCountersEntry | not-accessible | mandatory | PTP optimized transport channel counters table. |
| 1.3.6.1.4.1.2281.10.7.6.2.1.1 | ColumngenEquipRadioPtpTransportTxFrames | read-only | mandatory | PTP optimized transport TX frames. |
| 1.3.6.1.4.1.2281.10.7.6.2.1.2 | ColumngenEquipRadioPtpTransportTxDroppedFrames | read-only | mandatory | PTP optimized transport TX dropped frames. |
| 1.3.6.1.4.1.2281.10.7.6.2.1.3 | ColumngenEquipRadioPtpTransportTxBytes | read-only | mandatory | PTP optimized transport TX bytes. |
| 1.3.6.1.4.1.2281.10.7.6.2.1.4 | ColumngenEquipRadioPtpTransportTxDroppedBytes | read-only | mandatory | PTP optimized transport TX dropped bytes. |
| 1.3.6.1.4.1.2281.10.7.6.2.1.5 | ColumngenEquipRadioPtpTransportRxFrames | read-only | mandatory | PTP optimized transport RX frames. |
| 1.3.6.1.4.1.2281.10.7.6.2.1.6 | ColumngenEquipRadioPtpTransportRxBytes | read-only | mandatory | PTP optimized transport RX bytes. |
| 1.3.6.1.4.1.2281.10.7.7 | NodegenEquipRadioCutThrough | |||
| 1.3.6.1.4.1.2281.10.7.7.1 | TablegenEquipRadioCutThroughCfgTable | not-accessible | mandatory | Cut through configuration table. |
| 1.3.6.1.4.1.2281.10.7.7.1.1 | RowgenEquipRadioCutThroughCfgEntry | not-accessible | mandatory | Cut through configuration table. |
| 1.3.6.1.4.1.2281.10.7.7.1.1.1 | ColumngenEquipRadioCutThroughChannelAdmin | read-write | mandatory | Enable/Disable cut through mode. |
| 1.3.6.1.4.1.2281.10.7.7.2 | TablegenEquipRadioCutThroughCountersTable | not-accessible | mandatory | Cut through mode counters table. |
| 1.3.6.1.4.1.2281.10.7.7.2.1 | RowgenEquipRadioCutThroughCountersEntry | not-accessible | mandatory | Cut through mode counters table. |
| 1.3.6.1.4.1.2281.10.7.7.2.1.1 | ColumngenEquipRadioCutThroughTxFrames | read-only | mandatory | Cut through TX frames. |
| 1.3.6.1.4.1.2281.10.7.7.2.1.2 | ColumngenEquipRadioCutThroughTxBytes | read-only | mandatory | Cut through TX bytes. |
| 1.3.6.1.4.1.2281.10.7.7.2.1.3 | ColumngenEquipRadioCutThroughRxFrames | read-only | mandatory | Cut through RX frames. |
| 1.3.6.1.4.1.2281.10.7.7.2.1.4 | ColumngenEquipRadioCutThroughRxBytes | read-only | mandatory | Cut through RX bytes. |
| 1.3.6.1.4.1.2281.10.7.8 | NodegenEquipRadioGroups | |||
| 1.3.6.1.4.1.2281.10.7.8.1 | NodegenEquipRadioGroupsProtection | |||
| 1.3.6.1.4.1.2281.10.7.8.1.1 | TablegenEquipRadioGroupsProtectionAttrTable | not-accessible | mandatory | This table contains the attributes of the radio protection groups. |
| 1.3.6.1.4.1.2281.10.7.8.1.1.1 | RowgenEquipRadioGroupsProtectionAttrEntry | not-accessible | mandatory | This table entry contains the attributes of the radio protection groups. |
| 1.3.6.1.4.1.2281.10.7.8.1.1.1.1 | ColumngenEquipRadioGroupsProtectionAttrGroupIfIndex | read-only | mandatory | The location of the group |
| 1.3.6.1.4.1.2281.10.7.8.1.1.1.2 | ColumngenEquipRadioGroupsProtectionAttrGroupId | read-write | mandatory | The Id of the radio protection group. |
| 1.3.6.1.4.1.2281.10.7.8.1.1.1.3 | ColumngenEquipRadioGroupsProtectionAttrCommand | read-write | mandatory | Radio protection user commands for maintenance purposes: force-switch, lockout and manual-switch. |
| 1.3.6.1.4.1.2281.10.7.8.1.1.1.4 | ColumngenEquipRadioGroupsProtectionAttrCopyToMate | read-write | mandatory | Copy to mate command that copies the configuration from one radio to another in order to achieve configuration alignment. |
| 1.3.6.1.4.1.2281.10.7.8.1.1.1.5 | ColumngenEquipRadioGroupsProtectionAttrCopyToMateSourceIfIndex | read-write | mandatory | The radio location which is required to be the source of configuration for copy-to-mate command. |
| 1.3.6.1.4.1.2281.10.7.8.1.1.1.6 | ColumngenEquipRadioGroupsProtectionAttrRevertiveAdmin | read-write | mandatory | Enable or disable revertive mode of radio protection. |
| 1.3.6.1.4.1.2281.10.7.8.1.1.1.7 | ColumngenEquipRadioGroupsProtectionAttrRevertivePrimaryIfIndex | read-write | mandatory | The radio which the system is required to revert to. |
| 1.3.6.1.4.1.2281.10.7.8.1.2 | TablegenEquipRadioGroupsProtectionMembersTable | not-accessible | mandatory | This table contains the radio protection groups members. |
| 1.3.6.1.4.1.2281.10.7.8.1.2.1 | RowgenEquipRadioGroupsProtectionMembersEntry | not-accessible | mandatory | This table entry contains the radio protection groups members. |
| 1.3.6.1.4.1.2281.10.7.8.1.2.1.1 | ColumngenEquipRadioGroupsProtectionMembersIfIndexGroup | read-only | mandatory | The location of the radio protection group |
| 1.3.6.1.4.1.2281.10.7.8.1.2.1.2 | ColumngenEquipRadioGroupsProtectionMembersGroupId | read-only | mandatory | The Id of the radio protection group. |
| 1.3.6.1.4.1.2281.10.7.8.1.2.1.3 | ColumngenEquipRadioGroupsProtectionMembersMem1IfIndex | read-write | mandatory | The radio location of member 1. |
| 1.3.6.1.4.1.2281.10.7.8.1.2.1.4 | ColumngenEquipRadioGroupsProtectionMembersMem2IfIndex | read-write | mandatory | The radio location of member 2. |
| 1.3.6.1.4.1.2281.10.7.8.1.2.1.30 | ColumngenEquipRadioGroupsProtectionMembersRowStatus | read-write | mandatory | Row status to allow user add entries dynamically. |
| 1.3.6.1.4.1.2281.10.7.8.1.3 | TablegenEquipRadioGroupsProtectionStatusTable | not-accessible | mandatory | This table contains the status of the radio protection. |
| 1.3.6.1.4.1.2281.10.7.8.1.3.1 | RowgenEquipRadioGroupsProtectionStatusEntry | not-accessible | mandatory | This table entry contains the status of the radio protection. |
| 1.3.6.1.4.1.2281.10.7.8.1.3.1.1 | ColumngenEquipRadioGroupsProtectionStatusGroupIfIndex | read-only | mandatory | The location of the group |
| 1.3.6.1.4.1.2281.10.7.8.1.3.1.2 | ColumngenEquipRadioGroupsProtectionStatusActiveIfIndex | read-only | mandatory | The active radio location |
| 1.3.6.1.4.1.2281.10.7.8.1.3.1.3 | ColumngenEquipRadioGroupsProtectionStatusStandbyIfIndex | read-only | mandatory | The standby radio location. |
| 1.3.6.1.4.1.2281.10.7.8.1.3.1.4 | ColumngenEquipRadioGroupsProtectionStatusLockout | read-only | mandatory | The radio location of member 1. |
| 1.3.6.1.4.1.2281.10.7.8.1.10 | NodegenEquipRadioGroupsProtectionBBSSD | |||
| 1.3.6.1.4.1.2281.10.7.8.1.10.1 | TablegenEquipRadioGroupsProtectionBBSSDAttrTable | not-accessible | mandatory | This table contains the BBS-SD attributes of the radio protection groups. |
| 1.3.6.1.4.1.2281.10.7.8.1.10.1.1 | RowgenEquipRadioGroupsProtectionBBSSDAttrEntry | not-accessible | mandatory | This table entry contains the BBS-SD attributes of the radio protection groups. |
| 1.3.6.1.4.1.2281.10.7.8.1.10.1.1.1 | ColumngenEquipRadioGroupsProtectionBBSSDAttrGroupIfIndex | read-only | mandatory | The location of the group |
| 1.3.6.1.4.1.2281.10.7.8.1.10.1.1.2 | ColumngenEquipRadioGroupsProtectionBBSSDAttrRevertive | read-write | mandatory | Enable or disable revertive mode for BBS-SD Rx switch. |
| 1.3.6.1.4.1.2281.10.7.8.1.10.1.1.3 | ColumngenEquipRadioGroupsProtectionBBSSDAttrClrSwCnt | read-write | mandatory | Clear BBS-SD Rx switch counter. |
| 1.3.6.1.4.1.2281.10.7.8.1.10.1.1.4 | ColumngenEquipRadioGroupsProtectionBBSSDAttrFWAuto | read-write | mandatory | Enable or disable automatic Rx switching in BBS-SD. |
| 1.3.6.1.4.1.2281.10.7.8.1.10.2 | TablegenEquipRadioGroupsProtectionBBSSDStatusTable | not-accessible | mandatory | This table contains the BBS-SD status of the radio protection groups. |
| 1.3.6.1.4.1.2281.10.7.8.1.10.2.1 | RowgenEquipRadioGroupsProtectionBBSSDStatusEntry | not-accessible | mandatory | This table entry contains the BBS-SD status of the radio protection groups. |
| 1.3.6.1.4.1.2281.10.7.8.1.10.2.1.1 | ColumngenEquipRadioGroupsProtectionBBSSDStatusGroupIfIndex | read-only | mandatory | The location of the group |
| 1.3.6.1.4.1.2281.10.7.8.1.10.2.1.2 | ColumngenEquipRadioGroupsProtectionBBSSDStatusAbcGroupIfIndex | read-only | mandatory | The attached MC-ABC group if_index. |
| 1.3.6.1.4.1.2281.10.7.8.1.10.2.1.3 | ColumngenEquipRadioGroupsProtectionBBSSDStatusActiveRxQuality | read-only | mandatory | The active MC-ABC channel quality. |
| 1.3.6.1.4.1.2281.10.7.8.1.10.2.1.4 | ColumngenEquipRadioGroupsProtectionBBSSDStatusActiveRxRadioIfIndex | read-only | mandatory | The active rx radio if_index. |
| 1.3.6.1.4.1.2281.10.7.8.1.10.2.1.5 | ColumngenEquipRadioGroupsProtectionBBSSDStatusActiveTxRadioIfIndex | read-only | mandatory | The active Tx radio if_index. |
| 1.3.6.1.4.1.2281.10.7.8.1.10.2.1.6 | ColumngenEquipRadioGroupsProtectionBBSSDStatusLockout | read-only | mandatory | Indicates whether the radio protection is currently in lockout. |
| 1.3.6.1.4.1.2281.10.7.8.1.10.2.1.7 | ColumngenEquipRadioGroupsProtectionBBSSDStatusRxChId | read-only | mandatory | The attached MC-ABC channel ID. |
| 1.3.6.1.4.1.2281.10.7.8.1.10.2.1.8 | ColumngenEquipRadioGroupsProtectionBBSSDStatusStdbyRxQuality | read-only | mandatory | The standby MC-ABC channel quality. |
| 1.3.6.1.4.1.2281.10.7.8.1.10.2.1.9 | ColumngenEquipRadioGroupsProtectionBBSSDStatusStdbyRxRadioIfIndex | read-only | mandatory | The standby rx radio if_index. |
| 1.3.6.1.4.1.2281.10.7.8.1.10.2.1.10 | ColumngenEquipRadioGroupsProtectionBBSSDStatusStandbyTxRadioIfIndex | read-only | mandatory | The standby Tx radio if_index. |
| 1.3.6.1.4.1.2281.10.7.8.2 | NodegenEquipRadioGroupsXpic | |||
| 1.3.6.1.4.1.2281.10.7.8.2.1 | TablegenEquipRadioGroupsXPICAttrTable | not-accessible | mandatory | This table contains the configuration of the radio XPIC groups. |
| 1.3.6.1.4.1.2281.10.7.8.2.1.1 | RowgenEquipRadioGroupsXPICAttrEntry | not-accessible | mandatory | This table entry contains the configuration of the radio XPIC groups. |
| 1.3.6.1.4.1.2281.10.7.8.2.1.1.1 | ColumngenEquipRadioGroupsXPICAttrGroupIfIndex | read-only | mandatory | The location of the group. |
| 1.3.6.1.4.1.2281.10.7.8.2.1.1.2 | ColumngenEquipRadioGroupsXPICAttrCopyToMateSourceIfIndex | read-write | mandatory | The radio location which is required to be the source of configuration for copy-to-mate command. |
| 1.3.6.1.4.1.2281.10.7.8.2.1.1.3 | ColumngenEquipRadioGroupsXPICAttrGroupId | read-write | mandatory | XPIC group id. |
| 1.3.6.1.4.1.2281.10.7.8.2.1.1.4 | ColumngenEquipRadioGroupsXPICAttrXRSMAdmin | read-write | mandatory | Administrative state of XPIC recovery state machine. |
| 1.3.6.1.4.1.2281.10.7.8.2.1.1.5 | ColumngenEquipRadioGroupsXPICAttrAdmin | read-write | mandatory | Administrative state of XPIC. |
| 1.3.6.1.4.1.2281.10.7.8.2.1.1.6 | ColumngenEquipRadioGroupsXPICAttrCopyToMate | read-write | mandatory | User Command to resolve the mismatch between the two carriers in the XPIC group. |
| 1.3.6.1.4.1.2281.10.7.8.2.2 | TablegenEquipRadioGroupsXPICMembersTable | not-accessible | mandatory | This table contains the radio XPIC groups members. |
| 1.3.6.1.4.1.2281.10.7.8.2.2.1 | RowgenEquipRadioGroupsXPICMembersEntry | not-accessible | mandatory | This table entry contains the radio XPIC groups members. |
| 1.3.6.1.4.1.2281.10.7.8.2.2.1.1 | ColumngenEquipRadioGroupsXPICMembersIfIndexGroup | read-only | mandatory | The location of the radio XPIC group. |
| 1.3.6.1.4.1.2281.10.7.8.2.2.1.2 | ColumngenEquipRadioGroupsXPICMembersMem1IfIndex | read-write | mandatory | The radio location of member 1. |
| 1.3.6.1.4.1.2281.10.7.8.2.2.1.3 | ColumngenEquipRadioGroupsXPICMembersMem2IfIndex | read-write | mandatory | The radio location of member 2. |
| 1.3.6.1.4.1.2281.10.7.8.2.2.1.30 | ColumngenEquipRadioGroupsXPICMembersRowStatus | read-write | mandatory | Row status to allow user add entries dynamically. |
| 1.3.6.1.4.1.2281.10.7.8.2.3 | TablegenEquipRadioGroupsXPICStatusTable | not-accessible | mandatory | This table contains the status of the XPIC. |
| 1.3.6.1.4.1.2281.10.7.8.2.3.1 | RowgenEquipRadioGroupsXPICStatusEntry | not-accessible | mandatory | This table entry contains the status of the XPIC. |
| 1.3.6.1.4.1.2281.10.7.8.2.3.1.1 | ColumngenEquipRadioGroupsXPICStatusGroupIfIndex | read-only | mandatory | The location of the group |
| 1.3.6.1.4.1.2281.10.7.8.2.3.1.2 | ColumngenEquipRadioGroupsXPICStatusState | read-only | mandatory | The state of XPIC State Machine |
| 1.3.6.1.4.1.2281.10.7.8.3 | NodegenEquipRadioGroupsMR | |||
| 1.3.6.1.4.1.2281.10.7.8.3.1 | TablegenEquipRadioGroupsMRAttrTable | not-accessible | mandatory | MR config table. |
| 1.3.6.1.4.1.2281.10.7.8.3.1.1 | RowgenEquipRadioGroupsMRAttrEntry | not-accessible | mandatory | MR config table entry. |
| 1.3.6.1.4.1.2281.10.7.8.3.1.1.1 | ColumngenEquipRadioGroupsMRAttrGroupIfIndex | read-only | mandatory | The location of the group |
| 1.3.6.1.4.1.2281.10.7.8.3.1.1.2 | ColumngenEquipRadioGroupsMRAttrGroupId | read-only | mandatory | The Id of the radio MR group. |
| 1.3.6.1.4.1.2281.10.7.8.3.1.1.3 | ColumngenEquipRadioGroupsMRAttrAdmin | read-write | mandatory | MR Admin. |
| 1.3.6.1.4.1.2281.10.7.8.3.1.1.4 | ColumngenEquipRadioGroupsMRAttrBlockRadioIfindex | read-write | mandatory | Block Radio ifindex. |
| 1.3.6.1.4.1.2281.10.7.8.3.1.1.5 | ColumngenEquipRadioGroupsMRAttrBlockRadioAdmin | read-write | mandatory | Block Radio Admin. |
| 1.3.6.1.4.1.2281.10.7.8.3.1.1.6 | ColumngenEquipRadioGroupsMRAttrCopy2MateIfindex | read-write | mandatory | Copy2mate Radio ifindex. |
| 1.3.6.1.4.1.2281.10.7.8.3.1.1.7 | ColumngenEquipRadioGroupsMRAttrCopy2MateAdmin | read-write | mandatory | Copy2Mate Admin. |
| 1.3.6.1.4.1.2281.10.7.8.3.1.1.8 | ColumngenEquipRadioGroupsMRAttrExBerAdmin | read-write | mandatory | Excessive BER Admin. |
| 1.3.6.1.4.1.2281.10.7.8.3.1.1.9 | ColumngenEquipRadioGroupsMRAttrMinNumRadio | read-write | mandatory | Minimal num of radios. |
| 1.3.6.1.4.1.2281.10.7.8.3.1.1.10 | ColumngenEquipRadioGroupsMRAttrMinProfileAdmin | read-write | mandatory | Min ACM profile admin. |
| 1.3.6.1.4.1.2281.10.7.8.3.1.1.11 | ColumngenEquipRadioGroupsMRAttrSigDegardeAdmin | read-write | mandatory | Signal Degrade Admin. |
| 1.3.6.1.4.1.2281.10.7.8.3.2 | TablegenEquipRadioGroupsMRMembersTable | not-accessible | mandatory | MR members table. |
| 1.3.6.1.4.1.2281.10.7.8.3.2.1 | RowgenEquipRadioGroupsMRMembersEntry | not-accessible | mandatory | MR members table entry. |
| 1.3.6.1.4.1.2281.10.7.8.3.2.1.1 | ColumngenEquipRadioGroupsMRMembersIfIndexGroup | read-only | mandatory | The location of the radio MR group |
| 1.3.6.1.4.1.2281.10.7.8.3.2.1.2 | ColumngenEquipRadioGroupsMRMembersMem1IfIndex | read-write | mandatory | The radio location of member 1. |
| 1.3.6.1.4.1.2281.10.7.8.3.2.1.3 | ColumngenEquipRadioGroupsMRMembersMem2IfIndex | read-write | mandatory | The radio location of member 2. |
| 1.3.6.1.4.1.2281.10.7.8.3.2.1.30 | ColumngenEquipRadioGroupsMRMembersRowStatus | read-write | mandatory | Row status to allow user add entries dynamically. |
| 1.3.6.1.4.1.2281.10.7.8.3.3 | TablegenEquipRadioGroupsMRStatusTable | not-accessible | mandatory | MR Status table. |
| 1.3.6.1.4.1.2281.10.7.8.3.3.1 | RowgenEquipRadioGroupsMRStatusEntry | not-accessible | mandatory | MR Status table entry. |
| 1.3.6.1.4.1.2281.10.7.8.3.3.1.1 | ColumngenEquipRadioGroupsMRStatusGroupIfIndex | read-only | mandatory | The location of the group |
| 1.3.6.1.4.1.2281.10.7.8.3.3.1.2 | ColumngenEquipRadioGroupsMRStatusOpertionalState | read-only | mandatory | Operational State |
| 1.3.6.1.4.1.2281.10.7.8.3.3.1.3 | ColumngenEquipRadioGroupsMRStatusRemoteOpertionalState | read-only | mandatory | Remote Operational State. |
| 1.3.6.1.4.1.2281.10.7.8.4 | NodegenEquipRadioGroupsMIMO | |||
| 1.3.6.1.4.1.2281.10.7.8.4.1 | TablegenEquipRadioGroupsMIMOAttrTable | not-accessible | mandatory | The configuration table of the MIMO groups. |
| 1.3.6.1.4.1.2281.10.7.8.4.1.1 | RowgenEquipRadioGroupsMIMOAttrEntry | not-accessible | mandatory | The configuration table of the MIMO groups entry. |
| 1.3.6.1.4.1.2281.10.7.8.4.1.1.1 | ColumngenEquipRadioGroupsMIMOAttrGroupIfIndex | read-only | mandatory | MIMO configuration table index |
| 1.3.6.1.4.1.2281.10.7.8.4.1.1.2 | ColumngenEquipRadioGroupsMIMOAttrRole | read-write | mandatory | Role can be Master or Slave. |
| 1.3.6.1.4.1.2281.10.7.8.4.1.1.3 | ColumngenEquipRadioGroupsMIMOAttrAdmin | read-write | mandatory | Administrating state of the MIMO group. |
| 1.3.6.1.4.1.2281.10.7.8.4.1.1.4 | ColumngenEquipRadioGroupsMIMOAttrResetStateMachine | read-write | mandatory | Reset MIMO state machine. |
| 1.3.6.1.4.1.2281.10.7.8.4.2 | TablegenEquipRadioGroupsMIMOMembersTable | not-accessible | mandatory | The description the radio carrier members of the MIMO groups. |
| 1.3.6.1.4.1.2281.10.7.8.4.2.1 | RowgenEquipRadioGroupsMIMOMembersEntry | not-accessible | mandatory | The description the radio carrier members of the MIMO groups entry. |
| 1.3.6.1.4.1.2281.10.7.8.4.2.1.1 | ColumngenEquipRadioGroupsMIMOMembersGroupIfIndex | read-only | mandatory | MIMO members table index |
| 1.3.6.1.4.1.2281.10.7.8.4.2.1.2 | ColumngenEquipRadioGroupsMIMOMembersGroupType | read-write | mandatory | Type of MIMO group: 2x2 or 4x4 etc... |
| 1.3.6.1.4.1.2281.10.7.8.4.2.1.3 | ColumngenEquipRadioGroupsMIMOMembersMem1IfIndex | read-write | mandatory | The radio location of member 1. |
| 1.3.6.1.4.1.2281.10.7.8.4.2.1.4 | ColumngenEquipRadioGroupsMIMOMembersMem2IfIndex | read-write | mandatory | The radio location of member 2. |
| 1.3.6.1.4.1.2281.10.7.8.4.2.1.5 | ColumngenEquipRadioGroupsMIMOMembersMem3IfIndex | read-write | mandatory | The radio location of member 3. |
| 1.3.6.1.4.1.2281.10.7.8.4.2.1.6 | ColumngenEquipRadioGroupsMIMOMembersMem4IfIndex | read-write | mandatory | The radio location of member 4. |
| 1.3.6.1.4.1.2281.10.7.8.4.2.1.30 | ColumngenEquipRadioGroupsMIMOMembersRowStatus | read-write | mandatory | Row status to allow user add entries dynamically. |
| 1.3.6.1.4.1.2281.10.7.8.4.3 | TablegenEquipRadioGroupsMIMOStatusTable | not-accessible | mandatory | The current status table of the MIMO groups. |
| 1.3.6.1.4.1.2281.10.7.8.4.3.1 | RowgenEquipRadioGroupsMIMOStatusEntry | not-accessible | mandatory | The current status table of the MIMO groups entry. |
| 1.3.6.1.4.1.2281.10.7.8.4.3.1.1 | ColumngenEquipRadioGroupsMIMOStatusGroupIfIndex | read-only | mandatory | MIMO status table index |
| 1.3.6.1.4.1.2281.10.7.8.4.3.1.2 | ColumngenEquipRadioGroupsMIMOStatusState | read-only | mandatory | MIMO-State |
| 1.3.6.1.4.1.2281.10.7.8.4.3.1.3 | ColumngenEquipRadioGroupsMIMOStatus1stMMI | read-only | mandatory | MIMO interference in dB of the 1st carrier. |
| 1.3.6.1.4.1.2281.10.7.8.4.3.1.4 | ColumngenEquipRadioGroupsMIMOStatus2ndMMI | read-only | mandatory | MIMO interference in dB of the 2nd carrier. |
| 1.3.6.1.4.1.2281.10.7.8.4.3.1.5 | ColumngenEquipRadioGroupsMIMOStatus3rdMMI | read-only | mandatory | MIMO interference in dB of the 3rd carrier. |
| 1.3.6.1.4.1.2281.10.7.8.4.3.1.6 | ColumngenEquipRadioGroupsMIMOStatus4thMMI | read-only | mandatory | MIMO interference in dB of the 4th carrier. |
| 1.3.6.1.4.1.2281.10.7.8.4.3.1.7 | ColumngenEquipRadioGroupsMIMOStatusAdvancedState | read-only | mandatory | MIMO advanced state. |
| 1.3.6.1.4.1.2281.10.7.8.5 | NodegenEquipRadioGroupsAbc | |||
| 1.3.6.1.4.1.2281.10.7.8.5.1 | TablegenEquipRadioGroupsAbcAttrTable | not-accessible | mandatory | Multi Carrier ABC configuration table. |
| 1.3.6.1.4.1.2281.10.7.8.5.1.1 | RowgenEquipRadioGroupsAbcAttrEntry | not-accessible | mandatory | Multi Carrier ABC configuration table. |
| 1.3.6.1.4.1.2281.10.7.8.5.1.1.1 | ColumngenEquipRadioGroupsAbcAttrIfIndex | read-only | mandatory | The interface-index of the ABC group |
| 1.3.6.1.4.1.2281.10.7.8.5.1.1.2 | ColumngenEquipRadioGroupsAbcAttrGroupName | read-write | mandatory | Textual description of the ABC group. |
| 1.3.6.1.4.1.2281.10.7.8.5.1.1.3 | ColumngenEquipRadioGroupsAbcAttrAdminState | read-write | mandatory | The Administrative state of ABC radio group which decides if the Multi Carrier ABC group is enabled or disabled. |
| 1.3.6.1.4.1.2281.10.7.8.5.1.1.4 | ColumngenEquipRadioGroupsAbcAttrQnumberOfRadioMembers | read-write | mandatory | The number of radios that can be members of the Multi Carrier ABC group. |
| 1.3.6.1.4.1.2281.10.7.8.5.1.1.5 | ColumngenEquipRadioGroupsAbcAttrProtectionEnable | read-write | mandatory | When Protection is Enabled protecion groups can be added to the Multi-carrier ABC group. When disabled regular channels can be attached. |
| 1.3.6.1.4.1.2281.10.7.8.5.1.1.6 | ColumngenEquipRadioGroupsAbcAttrHighPriEthernetBandwidth | read-write | mandatory | Bandwidth reserved for high priority ethernet in Kbps. Values range from from 0 (i.e. No high pri ethernet) to max capacity (I.e. no STM-1s) in Kbps. |
| 1.3.6.1.4.1.2281.10.7.8.5.1.1.7 | ColumngenEquipRadioGroupsAbcAttrQualityThreshold | read-write | mandatory | Members degrading below this threshold will be set to 'do not use' in the group. |
| 1.3.6.1.4.1.2281.10.7.8.5.1.1.30 | ColumngenEquipRadioGroupsAbcAttrRowStatus | read-write | mandatory | This is the row status. |
| 1.3.6.1.4.1.2281.10.7.8.5.2 | TablegenEquipRadioGroupsAbcMembersTable | not-accessible | mandatory | Multi Carrier ABC members table. |
| 1.3.6.1.4.1.2281.10.7.8.5.2.1 | RowgenEquipRadioGroupsAbcMembersEntry | not-accessible | mandatory | Multi Carrier ABC members table entry. |
| 1.3.6.1.4.1.2281.10.7.8.5.2.1.1 | ColumngenEquipRadioGroupsAbcMembersGroupIfIndex | read-only | mandatory | Integer representing the group interface ifindex |
| 1.3.6.1.4.1.2281.10.7.8.5.2.1.2 | ColumngenEquipRadioGroupsAbcMembersGroupId | read-only | mandatory | Integer representing the group interface ID. |
| 1.3.6.1.4.1.2281.10.7.8.5.2.1.3 | ColumngenEquipRadioGroupsAbcMembersChannel1MemberIfIndex | read-write | mandatory | IfIndex representing the group member connect to this ABC channel. |
| 1.3.6.1.4.1.2281.10.7.8.5.2.1.4 | ColumngenEquipRadioGroupsAbcMembersChannel1adminState | read-write | mandatory | The Administrative state of an ABC channel. |
| 1.3.6.1.4.1.2281.10.7.8.5.2.1.5 | ColumngenEquipRadioGroupsAbcMembersChannel2MemberIfIndex | read-write | mandatory | IfIndex representing the group member connect to this ABC channel. |
| 1.3.6.1.4.1.2281.10.7.8.5.2.1.6 | ColumngenEquipRadioGroupsAbcMembersChannel2adminState | read-write | mandatory | The Administrative state of an ABC channel. |
| 1.3.6.1.4.1.2281.10.7.8.5.2.1.7 | ColumngenEquipRadioGroupsAbcMembersChannel3MemberIfIndex | read-write | mandatory | IfIndex representing the group member connect to this ABC channel. |
| 1.3.6.1.4.1.2281.10.7.8.5.2.1.8 | ColumngenEquipRadioGroupsAbcMembersChannel3adminState | read-write | mandatory | The Administrative state of an ABC channel. |
| 1.3.6.1.4.1.2281.10.7.8.5.2.1.9 | ColumngenEquipRadioGroupsAbcMembersChannel4MemberIfIndex | read-write | mandatory | IfIndex representing the group member connect to this ABC channel. |
| 1.3.6.1.4.1.2281.10.7.8.5.2.1.10 | ColumngenEquipRadioGroupsAbcMembersChannel4adminState | read-write | mandatory | The Administrative state of an ABC channel. |
| 1.3.6.1.4.1.2281.10.7.8.5.2.1.11 | ColumngenEquipRadioGroupsAbcMembersChannel5MemberIfIndex | read-write | mandatory | IfIndex representing the group member connect to this ABC channel. |
| 1.3.6.1.4.1.2281.10.7.8.5.2.1.12 | ColumngenEquipRadioGroupsAbcMembersChannel5adminState | read-write | mandatory | The Administrative state of an ABC channel. |
| 1.3.6.1.4.1.2281.10.7.8.5.2.1.13 | ColumngenEquipRadioGroupsAbcMembersChannel6MemberIfIndex | read-write | mandatory | IfIndex representing the group member connect to this ABC channel. |
| 1.3.6.1.4.1.2281.10.7.8.5.2.1.14 | ColumngenEquipRadioGroupsAbcMembersChannel6adminState | read-write | mandatory | The Administrative state of an ABC channel. |
| 1.3.6.1.4.1.2281.10.7.8.5.2.1.15 | ColumngenEquipRadioGroupsAbcMembersChannel7MemberIfIndex | read-write | mandatory | IfIndex representing the group member connect to this ABC channel. |
| 1.3.6.1.4.1.2281.10.7.8.5.2.1.16 | ColumngenEquipRadioGroupsAbcMembersChannel7adminState | read-write | mandatory | The Administrative state of an ABC channel. |
| 1.3.6.1.4.1.2281.10.7.8.5.2.1.17 | ColumngenEquipRadioGroupsAbcMembersChannel8MemberIfIndex | read-write | mandatory | IfIndex representing the group member connect to this ABC channel. |
| 1.3.6.1.4.1.2281.10.7.8.5.2.1.18 | ColumngenEquipRadioGroupsAbcMembersChannel8adminState | read-write | mandatory | The Administrative state of an ABC channel. |
| 1.3.6.1.4.1.2281.10.7.8.5.3 | TablegenEquipRadioGroupsAbcStatusTable | not-accessible | mandatory | Multi Carrier ABC status table. |
| 1.3.6.1.4.1.2281.10.7.8.5.3.1 | RowgenEquipRadioGroupsAbcStatusEntry | not-accessible | mandatory | Multi Carrier ABC status table entry. |
| 1.3.6.1.4.1.2281.10.7.8.5.3.1.1 | ColumngenEquipRadioGroupsAbcStatusIfIndex | read-only | mandatory | The interface-index of the ABC group |
| 1.3.6.1.4.1.2281.10.7.8.5.3.1.2 | ColumngenEquipRadioGroupsAbcStatusOperState | read-only | mandatory | The operational state of the ABC group as a WAN. |
| 1.3.6.1.4.1.2281.10.7.8.5.3.1.3 | ColumngenEquipRadioGroupsAbcStatusRemoteOperState | read-only | mandatory | The remote ABC groups operational state. |
| 1.3.6.1.4.1.2281.10.7.8.5.3.1.4 | ColumngenEquipRadioGroupsAbcStatusCurrentAggregatedCapacityRX | read-only | mandatory | The combined current RX throughput capacity of the ABC group in Kbps. |
| 1.3.6.1.4.1.2281.10.7.8.5.3.1.5 | ColumngenEquipRadioGroupsAbcStatusCurrentAggregatedCapacityTX | read-only | mandatory | The combined current TX throughput capacity of the ABC group in Kbps. |
| 1.3.6.1.4.1.2281.10.7.8.5.3.1.6 | ColumngenEquipRadioGroupsAbcStatusChannel1Operstate | read-only | mandatory | The operational state of the ABC channel. |
| 1.3.6.1.4.1.2281.10.7.8.5.3.1.7 | ColumngenEquipRadioGroupsAbcStatusChannel1Capacity | read-only | mandatory | The current throughput capacity of the ABC channel in Kbps. |
| 1.3.6.1.4.1.2281.10.7.8.5.3.1.8 | ColumngenEquipRadioGroupsAbcStatusChannel2Operstate | read-only | mandatory | The operational state of the ABC channel. |
| 1.3.6.1.4.1.2281.10.7.8.5.3.1.9 | ColumngenEquipRadioGroupsAbcStatusChannel2Capacity | read-only | mandatory | The current throughput capacity of the ABC channel in Kbps. |
| 1.3.6.1.4.1.2281.10.7.8.5.3.1.10 | ColumngenEquipRadioGroupsAbcStatusChannel3OperState | read-only | mandatory | The operational state of the ABC channel. |
| 1.3.6.1.4.1.2281.10.7.8.5.3.1.11 | ColumngenEquipRadioGroupsAbcStatusChannel3Capacity | read-only | mandatory | The current throughput capacity of the ABC channel in Kbps. |
| 1.3.6.1.4.1.2281.10.7.8.5.3.1.12 | ColumngenEquipRadioGroupsAbcStatusChannel4OperState | read-only | mandatory | The operational state of the ABC channel. |
| 1.3.6.1.4.1.2281.10.7.8.5.3.1.13 | ColumngenEquipRadioGroupsAbcStatusChannel4Capacity | read-only | mandatory | The current throughput capacity of the ABC channel in Kbps. |
| 1.3.6.1.4.1.2281.10.7.8.5.3.1.14 | ColumngenEquipRadioGroupsAbcStatusChannel5OperState | read-only | mandatory | The operational state of the ABC channel. |
| 1.3.6.1.4.1.2281.10.7.8.5.3.1.15 | ColumngenEquipRadioGroupsAbcStatusChannel5Capacity | read-only | mandatory | The current throughput capacity of the ABC channel in Kbps. |
| 1.3.6.1.4.1.2281.10.7.8.5.3.1.16 | ColumngenEquipRadioGroupsAbcStatusChannel6OperState | read-only | mandatory | The operational state of the ABC channel. |
| 1.3.6.1.4.1.2281.10.7.8.5.3.1.17 | ColumngenEquipRadioGroupsAbcStatusChannel6Capacity | read-only | mandatory | The current throughput capacity of the ABC channel in Kbps. |
| 1.3.6.1.4.1.2281.10.7.8.5.3.1.18 | ColumngenEquipRadioGroupsAbcStatusChannel7OperState | read-only | mandatory | The operational state of the ABC channel. |
| 1.3.6.1.4.1.2281.10.7.8.5.3.1.19 | ColumngenEquipRadioGroupsAbcStatusChannel7Capacity | read-only | mandatory | The current throughput capacity of the ABC channel in Kbps. |
| 1.3.6.1.4.1.2281.10.7.8.5.3.1.20 | ColumngenEquipRadioGroupsAbcStatusChannel8OperState | read-only | mandatory | The operational state of the ABC channel. |
| 1.3.6.1.4.1.2281.10.7.8.5.3.1.21 | ColumngenEquipRadioGroupsAbcStatusChannel8Capacity | read-only | mandatory | The current throughput capacity of the ABC channel in Kbps. |
| 1.3.6.1.4.1.2281.10.7.8.5.5 | TablegenEquipStm1AbcAttrTable | not-accessible | mandatory | Multi Carrier ABC stm1 table. |
| 1.3.6.1.4.1.2281.10.7.8.5.5.1 | RowgenEquipStm1AbcAttrEntry | not-accessible | mandatory | Multi Carrier ABC stm1 table entry. |
| 1.3.6.1.4.1.2281.10.7.8.5.5.1.1 | ColumngenEquipStm1AbcAttrIfIndex | read-only | mandatory | The interface-index of the ABC group |
| 1.3.6.1.4.1.2281.10.7.8.5.5.1.2 | ColumngenEquipStm1AbcAttrGroupId | read-only | mandatory | Integer representing the group interface ID. |
| 1.3.6.1.4.1.2281.10.7.8.5.5.1.3 | ColumngenEquipStm1AbcAttrNumberOfMembers | read-write | mandatory | The number of STM-1/OC-3 channels that can be members of the Multi Carrier ABC group. |
| 1.3.6.1.4.1.2281.10.7.8.5.5.1.4 | ColumngenEquipStm1AbcAttrPri1IfIndex | read-write | mandatory | Location of the highest priority STM-1/OC-3 interface. |
| 1.3.6.1.4.1.2281.10.7.8.5.5.1.5 | ColumngenEquipStm1AbcAttrPri2IfIndex | read-write | mandatory | Location of the highest priority STM-1/OC-3 interface. |
| 1.3.6.1.4.1.2281.10.7.8.5.5.1.6 | ColumngenEquipStm1AbcAttrPri3IfIndex | read-write | mandatory | Location of the highest priority STM-1/OC-3 interface. |
| 1.3.6.1.4.1.2281.10.7.8.5.5.1.7 | ColumngenEquipStm1AbcAttrPri4IfIndex | read-write | mandatory | Location of the highest priority STM-1/OC-3 interface. |