MIB Viewer

NBS-PRBS-MIB

45 objects
Pattern checking and generation
OIDNameAccessStatusDescription
1.3.6.1.4.1.629.212IdentitynbsPrbsMibPattern checking and generation
1.3.6.1.4.1.629.212.1IdentitynbsPrbsPatternGrpcurrentAvailable bit sequences
1.3.6.1.4.1.629.212.1.1ScalarnbsPrbsPatternTableSizeread-onlycurrentNumber of entries in nbsPrbsPatternTable
1.3.6.1.4.1.629.212.1.2TablenbsPrbsPatternTablenot-accessiblecurrentList of known PRBS patterns
1.3.6.1.4.1.629.212.1.2.1RownbsPrbsPatternEntrynot-accessiblecurrentA particular PRBS pattern
1.3.6.1.4.1.629.212.1.2.1.1ColumnnbsPrbsPatternIndexnot-accessiblecurrentIndex 1 is reserved. Indexing starts from 2.
1.3.6.1.4.1.629.212.1.2.1.2ColumnnbsPrbsPatternNameread-onlycurrentName of this pattern
1.3.6.1.4.1.629.212.1.2.1.3ColumnnbsPrbsPatternDescread-onlycurrentDescription of this pattern
1.3.6.1.4.1.629.212.2IdentitynbsPrbsGenGrpcurrentPRBS pattern generation status and configuration
1.3.6.1.4.1.629.212.2.1ScalarnbsPrbsGenTableSizeread-onlycurrent
1.3.6.1.4.1.629.212.2.2TablenbsPrbsGenTablenot-accessiblecurrentList of ports that can generate a PRBS bitstream.
1.3.6.1.4.1.629.212.2.2.1RownbsPrbsGenEntrynot-accessiblecurrentAn individual port's PRBS pattern generation status and configuration
1.3.6.1.4.1.629.212.2.2.1.1ColumnnbsPrbsGenIfIndexnot-accessiblecurrentThe Mib2 ifIndex of this pattern generator port.
1.3.6.1.4.1.629.212.2.2.1.2ColumnnbsPrbsGenPatternCapsread-onlycurrentBitmask indicating which patterns can be generated from this port. Bits 0 and 1 are reserved. Subsequent bits refer to the nbsPrbsPatternTable. Bit 2 correspon…
1.3.6.1.4.1.629.212.2.2.1.3ColumnnbsPrbsGenPatternIndexread-writecurrentThe nbsPrbsPatternIndex to utilize. When read, the value -1 indicates pattern generation is not supported. When read, the value 1 indicates there is no pattern…
1.3.6.1.4.1.629.212.2.2.1.4ColumnnbsPrbsGenDurationMaxread-onlycurrentThe maximum length of time, in seconds, that a bitstream can be generated from this port. The value 0 indicates there is no limit on the length of time. The va…
1.3.6.1.4.1.629.212.2.2.1.5ColumnnbsPrbsGenDurationread-writecurrentThe length of time, in seconds, to generate a bitstream. The value 0 indicates test should run until terminated manually by user. When read, the value -1 indic…
1.3.6.1.4.1.629.212.2.2.1.6ColumnnbsPrbsGenActionread-writecurrentUsed to initiate and terminate pattern generation from this port. If pattern generation is not available from this port, Agent will report notSupported(1). Any…
1.3.6.1.4.1.629.212.2.2.1.7ColumnnbsPrbsGenStatusread-onlycurrentIndicates whether this port is generating a test bitstream. If notSupported(1), this port cannot generate a test bitstream. If unknown(2), this port can genera…
1.3.6.1.4.1.629.212.2.2.1.8ColumnnbsPrbsGenProgressread-onlycurrentIndicates how long, in seconds, the port has been generating a bitstream. When nbsPrbsGenStatus changes to generating(4), this.counter should be cleared to zer…
1.3.6.1.4.1.629.212.3IdentitynbsPrbsCheckGrpcurrentPRBS pattern checking status and configuration
1.3.6.1.4.1.629.212.3.1ScalarnbsPrbsCheckTableSizeread-onlycurrent
1.3.6.1.4.1.629.212.3.2TablenbsPrbsCheckTablenot-accessiblecurrentList of ports that can check a PRBS bitstream.
1.3.6.1.4.1.629.212.3.2.1RownbsPrbsCheckEntrynot-accessiblecurrentAn individual port's PRBS pattern checking status and configuration
1.3.6.1.4.1.629.212.3.2.1.1ColumnnbsPrbsCheckIfIndexnot-accessiblecurrentThe Mib2 ifIndex of this pattern checker port.
1.3.6.1.4.1.629.212.3.2.1.2ColumnnbsPrbsCheckPatternCapsread-onlycurrentBitmask indicating which patterns can be checked from this port. Bits 0 and 1 are reserved. Subsequent bits refer to the nbsPrbsPatternTable. Bit 2 corresponds…
1.3.6.1.4.1.629.212.3.2.1.3ColumnnbsPrbsCheckPatternIndexread-writecurrentThe nbsPrbsPatternIndex to check for. When read, the value -1 indicates pattern checking is not supported. When read, the value 1 indicates there is no pattern…
1.3.6.1.4.1.629.212.3.2.1.4ColumnnbsPrbsCheckDurationMaxread-onlycurrentThe maximum length of time, in seconds, that a bitstream can be checked from this port. The value 0 indicates there is no limit on the length of time. The valu…
1.3.6.1.4.1.629.212.3.2.1.5ColumnnbsPrbsCheckDurationread-writecurrentThe length of time, in seconds, to check a bitstream. The value 0 indicates test should run until terminated manually by user. When read, the value -1 indicate…
1.3.6.1.4.1.629.212.3.2.1.6ColumnnbsPrbsCheckActionread-writecurrentUsed to initiate and terminate pattern checking from this port. If pattern checking is not available from this port, Agent will report notSupported(1). Any SET…
1.3.6.1.4.1.629.212.3.2.1.7ColumnnbsPrbsCheckStatusread-onlycurrentIndicates whether this port is checking a bitstream. If notSupported(1), this port cannot check a test bitstream. If idle(2), this port is currently not checki…
1.3.6.1.4.1.629.212.3.2.1.8ColumnnbsPrbsCheckProgressread-onlycurrentIndicates how long, in seconds, the port has been checking a bitstream. When nbsPrbsCheckStatus changes to idle(2), this.counter should be cleared to zero(0) a…
1.3.6.1.4.1.629.212.3.2.1.9ColumnnbsPrbsCheckErrorsread-onlycurrentIndicates how many errors were detected during the last pattern checking session. The Agent should clear this counter to zero(0) when nbsPrbsCheckStatus change…
1.3.6.1.4.1.629.212.3.2.1.10ColumnnbsPrbsCheckUpdateFreqread-writecurrentIndicates how frequently, in minutes, the nbsPrbsTrapCheckerStatusUpdate Notification should be sent. The value zero (0) disables update Notifications.
1.3.6.1.4.1.629.212.200IdentitynbsPrbsTrapGrpcurrentObjects used as varbinds in traps
1.3.6.1.4.1.629.212.200.0IdentitynbsPrbsTraps0currentPRBS event notifications
1.3.6.1.4.1.629.212.200.0.10NotificationnbsPrbsTrapGeneratorStartedcurrentSent when nbsPrbsGenStatus transitions to generating(4). This Notification should be of Severity INFO.
1.3.6.1.4.1.629.212.200.0.11NotificationnbsPrbsTrapGeneratorStoppedcurrentSent when nbsPrbsGenStatus transitions from generating(4). This Notification should be of Severity INFO.
1.3.6.1.4.1.629.212.200.0.20NotificationnbsPrbsTrapCheckerStartedcurrentSent when an interface begins checking for a bitstream. This Notification should be of Severity INFO.
1.3.6.1.4.1.629.212.200.0.21NotificationnbsPrbsTrapCheckerStoppedcurrentSent when an interface stops checking for a bitstream. This Notification should be of Severity INFO.
1.3.6.1.4.1.629.212.200.0.22NotificationnbsPrbsTrapCheckerOverflowedcurrentSent when nbsPrbsCheckStatus transitions to errOverflow(6). This event indicates that the checker was unable to continue and is now in a suspended state which …
1.3.6.1.4.1.629.212.200.0.23NotificationnbsPrbsTrapCheckerErrorDetectedcurrentSent when nbsPrbsCheckErrors transitions from zero (0). This event indicates the first error was detected in the incoming bitstream. This Notification should b…
1.3.6.1.4.1.629.212.200.0.24NotificationnbsPrbsTrapCheckerStatusUpdatecurrentThis Notification periodically reports the status, error counts, and running time of the Checker process. This Notification should be of Severity INFO.
1.3.6.1.4.1.629.212.200.0.25NotificationnbsPrbsTrapCheckerSyncIncurrentSent when a checker port synchronizes with a bitstream. This Notification should be of Severity ERROR.
1.3.6.1.4.1.629.212.200.0.26NotificationnbsPrbsTrapCheckerSyncOutcurrentSent when a checker port loses synchronization with a bitstream. This Notification should be of Severity ERROR.