NETGEAR-RADLAN-IP
121 objects
The private MIB module definition for IP MIB.
Imported Objects
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.4526.17.26 | IdentityipSpec | The private MIB module definition for IP MIB. | ||
| 1.3.6.1.4.1.4526.17.26.1 | TablersIpAddrTable | not-accessible | current | This table is parralel to MIB II IpAddrTable, and is used to add/delete entries to/from that table. In addition it contains private objects. |
| 1.3.6.1.4.1.4526.17.26.1.1 | RowrsIpAddrEntry | not-accessible | current | The addressing information for one of this entity's IP addresses. |
| 1.3.6.1.4.1.4526.17.26.1.1.1 | ColumnrsIpAdEntAddr | read-only | current | The IP address to which this entry's addressing information pertains. |
| 1.3.6.1.4.1.4526.17.26.1.1.2 | ColumnrsIpAdEntIfIndex | read-write | current | The index value which uniquely identifies the interface to which this entry is applicable. The interface identified by a particular value of this index is the … |
| 1.3.6.1.4.1.4526.17.26.1.1.3 | ColumnrsIpAdEntNetMask | read-write | current | The subnet mask associated with the IP address of this entry. The value of the mask is an IP address with all the network bits set to 1 and all the hosts bits … |
| 1.3.6.1.4.1.4526.17.26.1.1.4 | ColumnrsIpAdEntForwardIpBroadcast | read-write | current | This variable controls forwarding of IP (sub)net-directed broadcasts destined for an attached sub(net). |
| 1.3.6.1.4.1.4526.17.26.1.1.5 | ColumnrsIpAdEntBackupAddr | read-write | current | In case there are two IP routers in the domain, the address of the second IP router. |
| 1.3.6.1.4.1.4526.17.26.1.1.6 | ColumnrsIpAdEntStatus | read-write | current | The validity of this entry. Invalid indicates that this entry is invalid in IpAddrTable (MIB II). |
| 1.3.6.1.4.1.4526.17.26.1.1.7 | ColumnrsIpAdEntBcastAddr | read-write | current | Indicates how the host part of ip subnet broadcast messages will be filled: 0 - host part will be filled by 0 1 - host part will be filled by 1. |
| 1.3.6.1.4.1.4526.17.26.1.1.8 | ColumnrsIpAdEntArpServer | read-write | current | Indicates whether the router will reply to incoming ARP requests on this interface, providing the physical address corresponding to this IP interface. |
| 1.3.6.1.4.1.4526.17.26.1.1.9 | ColumnrsIpAdEntName | read-write | current | The IP Interface name |
| 1.3.6.1.4.1.4526.17.26.1.1.10 | ColumnrsIpAdEntOwner | read-write | current | The IP Interface owner. Static if interface defined by user, dhcp if received by boot protocol like DHCP and internal for internal usage. |
| 1.3.6.1.4.1.4526.17.26.1.1.11 | ColumnrsIpAdEntAdminStatus | read-write | current | The IP Interface admin status. |
| 1.3.6.1.4.1.4526.17.26.1.1.12 | ColumnrsIpAdEntOperStatus | read-only | current | If active the interface can be used to send and receive frames. |
| 1.3.6.1.4.1.4526.17.26.1.1.13 | ColumnrsIpAdEntPrecedence | read-write | current | The IP preference, to be selected as source IP for rsIpAdEntIfIndex. this source IP selection is first by preference value. if more than one IP has the same pr… |
| 1.3.6.1.4.1.4526.17.26.1.1.14 | ColumnrsIpAdEntUniqueStatus | read-only | current | The IP address unique status defines IP address state in an assignment process and after duplication detection. |
| 1.3.6.1.4.1.4526.17.26.1.1.15 | ColumnrsIpAdEntIcmpRedirectSend | read-create | current | Enables or disables sending of ICMP redirect messages to re-send a packet through the same interface on which the packet was received. |
| 1.3.6.1.4.1.4526.17.26.2 | NodeicmpSpec | |||
| 1.3.6.1.4.1.4526.17.26.2.1 | ScalarrsIcmpGenErrMsgEnable | read-write | current | This variable controlls the ability to generate ICMP error messages |
| 1.3.6.1.4.1.4526.17.26.2.2 | TablersIcmpRdTable | not-accessible | current | This table contains ICMP Router Discovery parameters configurated per IP interface. |
| 1.3.6.1.4.1.4526.17.26.2.2.1 | RowrsIcmpRdEntry | not-accessible | current | The ICMP parameters configurated for IP interface. |
| 1.3.6.1.4.1.4526.17.26.2.2.1.1 | ColumnrsIcmpRdIpAddr | read-only | current | The IP address to which this entry's information pertains. |
| 1.3.6.1.4.1.4526.17.26.2.2.1.2 | ColumnrsIcmpRdIpAdvertAddr | read-write | current | The IP destination address to be used for multicast Router Advertisements sent from the interface. The only permissible values are the all-systems multicast ad… |
| 1.3.6.1.4.1.4526.17.26.2.2.1.3 | ColumnrsIcmpRdMaxAdvertInterval | read-write | current | The maximum time allowed between sending multicast Router Advertisements from the interface, in seconds. Must be no less than 4 seconds and no greater than 180… |
| 1.3.6.1.4.1.4526.17.26.2.2.1.4 | ColumnrsIcmpRdMinAdvertInterval | read-write | current | The minimum time allowed between sending unsolicited multicast Router Advertisements from the interface, in seconds. Must be no less than 3 seconds and no grea… |
| 1.3.6.1.4.1.4526.17.26.2.2.1.5 | ColumnrsIcmpRdAdvertLifetime | read-write | current | The maximum length of time that the advertised addresses are to be considered as valid. Must be no less than rsIcmpRdMaxAdvertInterval and no greater than 9000… |
| 1.3.6.1.4.1.4526.17.26.2.2.1.6 | ColumnrsIcmpRdAdvertise | read-write | current | A flag indicating whether or not the address is to be advertised. |
| 1.3.6.1.4.1.4526.17.26.2.2.1.7 | ColumnrsIcmpRdPreferenceLevel | read-write | current | The preferability of the address as a default router address, relative to other router addresses on the same subnet. |
| 1.3.6.1.4.1.4526.17.26.2.2.1.8 | ColumnrsIcmpRdEntStatus | read-write | current | Setting of any value to this object set values of all fields to the default values. |
| 1.3.6.1.4.1.4526.17.26.3 | Noderip2Spec | |||
| 1.3.6.1.4.1.4526.17.26.4 | NodearpSpec | |||
| 1.3.6.1.4.1.4526.17.26.4.1 | ScalarrsArpDeleteTable | read-write | current | Setting to value deleteArpTab(1): deletes the arp table - static and dynamic entries deleteIpArpDynamicEntries(2): delete all dynamic entries deleteIpArpStatic… |
| 1.3.6.1.4.1.4526.17.26.4.2 | ScalarrsArpInactiveTimeOut | read-write | current | This variable defines the maximum time period (in second) that can pass between ARP requests concerning an entry in the ARP table. After this time period, the … |
| 1.3.6.1.4.1.4526.17.26.4.3 | ScalarrsArpProxy | read-write | current | When ARP Proxy is enabled, the router can respond to ARP requests for nodes located on a different sub-net, provided they are it its network table. The router … |
| 1.3.6.1.4.1.4526.17.26.4.4 | ScalarrsArpRequestsSent | read-only | current | Displays how many ARP requests have been sent out to an ARP server for address resolution. |
| 1.3.6.1.4.1.4526.17.26.4.5 | ScalarrsArpRepliesSent | read-only | current | Displays how many ARP replies have been sent out to an ARP client in response to request packets. |
| 1.3.6.1.4.1.4526.17.26.4.6 | ScalarrsArpProxyRepliesSent | read-only | current | Displays how many proxy ARP replies have been sent out in response to request packets. A proxy router serving as a gateway to a subnet would respond with a pro… |
| 1.3.6.1.4.1.4526.17.26.4.7 | ScalarrsArpUnresolveTimer | read-write | current | Specifies the frequency in seconds in which to send out ARP requests to resolve the Next Hop MAC address. |
| 1.3.6.1.4.1.4526.17.26.4.8 | ScalarrsArpMibVersion | read-only | current | MIB's version, the current version is 2. Version 1: rsArpDeleteTable Setting this object to any not-null value has the effect of deleting all entries of the AR… |
| 1.3.6.1.4.1.4526.17.26.4.9 | TablersArpStaticTable | not-accessible | current | The table used for adding static ARP entries without specifying Layer 2 interface. |
| 1.3.6.1.4.1.4526.17.26.4.9.1 | RowrsArpStaticEntry | not-accessible | current | Each entry contains one IpAddress to `physical' address equivalence. |
| 1.3.6.1.4.1.4526.17.26.4.9.1.1 | ColumnrsArpStaticIpAddress | not-accessible | current | The IpAddress corresponding to the media-dependent `physical' address. |
| 1.3.6.1.4.1.4526.17.26.4.9.1.2 | ColumnrsArpStaticPhysAddress | read-write | current | The media-dependent `physical' address. |
| 1.3.6.1.4.1.4526.17.26.4.9.1.3 | ColumnrsArpStaticRowStatus | read-write | current | Entry status. |
| 1.3.6.1.4.1.4526.17.26.4.10 | TablersArpInterfaceTable | not-accessible | current | L2 Interface specific configuration for ARP Application. Entry in this table will be dynamically created, when first IP Address is defined on specific L2 inter… |
| 1.3.6.1.4.1.4526.17.26.4.10.1 | RowrsArpInterfaceEntry | not-accessible | current | Each entry contains L2 Interface specific configuration for ARP Application. |
| 1.3.6.1.4.1.4526.17.26.4.10.1.1 | ColumnrsArpInterfaceIfIndex | not-accessible | current | The index value that uniquely identifies the interface to which this entry is applicable. The interface identified by a particular value of this index is the s… |
| 1.3.6.1.4.1.4526.17.26.4.10.1.2 | ColumnrsArpInterfaceInactiveTimeOut | read-write | current | This variable defines the maximum time period (in second) that can pass between ARP requests concerning an entry in the ARP table. After this time period, the … |
| 1.3.6.1.4.1.4526.17.26.4.10.1.3 | ColumnrsArpInterfaceArpProxy | read-write | current | When ARP Proxy is enabled, the router can respond to ARP requests for nodes located on a different sub-net, provided they are it its network table. The router … |
| 1.3.6.1.4.1.4526.17.26.4.11 | ScalarrsArpNumOfEntries | read-only | current | Displays how many ARP entries stored in ARP Table. |
| 1.3.6.1.4.1.4526.17.26.5 | Nodetftp | |||
| 1.3.6.1.4.1.4526.17.26.5.1 | ScalarrsTftpRetryTimeOut | read-write | current | General Retransmission time-out value (seconds) |
| 1.3.6.1.4.1.4526.17.26.5.2 | ScalarrsTftpTotalTimeOut | read-write | current | Total Retransmission time-out value (seconds) |
| 1.3.6.1.4.1.4526.17.26.5.3 | ScalarrsSendConfigFile | read-write | current | The file name include path where the Router Server will put the full configuration. The default destination address will be the sender address. |
| 1.3.6.1.4.1.4526.17.26.5.4 | ScalarrsGetConfigFile | read-write | current | The file name include path where the Router Server will get the full configuration from. The default destination address will be the sender address. |
| 1.3.6.1.4.1.4526.17.26.5.5 | ScalarrsLoadSoftware | read-write | current | The file name include path where the Router Server will get the software. The default source address will be the sender address. |
| 1.3.6.1.4.1.4526.17.26.5.6 | ScalarrsFileServerAddress | read-write | current | The IP address of the configuration / sw server. |
| 1.3.6.1.4.1.4526.17.26.5.7 | ScalarrsSoftwareDeviceName | read-write | current | The Software Device Name specifies a device name, using this Software |
| 1.3.6.1.4.1.4526.17.26.5.8 | ScalarrsSoftwareFileAction | read-write | current | Holds the current action done on the software file |
| 1.3.6.1.4.1.4526.17.26.6 | NodeipRedundancy | |||
| 1.3.6.1.4.1.4526.17.26.7 | NodeipRouteLeaking | |||
| 1.3.6.1.4.1.4526.17.26.8 | NodeipRipFilter | |||
| 1.3.6.1.4.1.4526.17.26.9 | ScalarrsRipEnable | read-write | current | Enables, disables or shutdown (doesn't delete configuration) RIP. |
| 1.3.6.1.4.1.4526.17.26.11 | ScalarrsTelnetPassword | read-write | current | |
| 1.3.6.1.4.1.4526.17.26.12 | TablerlTranslationNameToIpTable | not-accessible | current | This table translates IP interfaces's name to IP interface's address |
| 1.3.6.1.4.1.4526.17.26.12.1 | RowrlTranslationNameToIpEntry | not-accessible | current | The row definition for this table. |
| 1.3.6.1.4.1.4526.17.26.12.1.1 | ColumnrlTranslationNameToIpName | read-only | current | The IP Interface name |
| 1.3.6.1.4.1.4526.17.26.12.1.2 | ColumnrlTranslationNameToIpIpAddr | read-only | current | The IP Interface address |
| 1.3.6.1.4.1.4526.17.26.13 | NoderlIpRoutingProtPreference | |||
| 1.3.6.1.4.1.4526.17.26.14 | NoderlOspf | |||
| 1.3.6.1.4.1.4526.17.26.15 | ScalarrlIpAddrTableMibVersion | read-only | current | The IpAddrTable MIB's version. |
| 1.3.6.1.4.1.4526.17.26.16 | TablerlIpCidrRouteExtTable | not-accessible | current | Augmenting ipCidrRouteTable (ip forwarfing information table) for added info as read only |
| 1.3.6.1.4.1.4526.17.26.16.1 | RowrlIpCidrRouteExtEntry | not-accessible | current | A row of the table ipCidrRouteTable Extended by this definition. |
| 1.3.6.1.4.1.4526.17.26.16.1.1 | ColumnrlIpCidrRouteProto | read-only | current | Added infor for ipCidrRouteTable. extends the info of ipCidrRouteProto to show the route inner protocol. Allowes the user to see which type of route in the pro… |
| 1.3.6.1.4.1.4526.17.26.17 | NoderlIpStaticRoute | |||
| 1.3.6.1.4.1.4526.17.26.17.1 | TablerlIpStaticRouteTable | not-accessible | current | This entity's static (user configured) IP Routing table. entries are MAX-ACCESSible even if not used for forwarding |
| 1.3.6.1.4.1.4526.17.26.17.1.1 | RowrlIpStaticRouteEntry | not-accessible | current | A particular Static(user configured) route to a particular destina- tion, under a particular policy. |
| 1.3.6.1.4.1.4526.17.26.17.1.1.1 | ColumnrlIpStaticRouteDest | read-only | current | The destination IP address of this route. This object may not take a Multicast (Class D) address value. Any assignment (implicit or otherwise) of an instance o… |
| 1.3.6.1.4.1.4526.17.26.17.1.1.2 | ColumnrlIpStaticRouteMask | read-only | current | Indicate the mask to be logical-ANDed with the destination address before being compared to the value in the rlIpStaticRouteDest field. For those systems that … |
| 1.3.6.1.4.1.4526.17.26.17.1.1.3 | ColumnrlIpStaticRouteTos | read-only | current | See ipCidrRouteTos definition For now only value 0 is valid |
| 1.3.6.1.4.1.4526.17.26.17.1.1.4 | ColumnrlIpStaticRouteNextHop | read-only | current | On remote routes, the address of the next sys- tem en route; Otherwise, 0.0.0.0. |
| 1.3.6.1.4.1.4526.17.26.17.1.1.5 | ColumnrlIpStaticRouteMetric | read-write | current | The routing metric for this route. The semantics of this metric are determined by the user. normal semantic will be next hop count or some administarative dist… |
| 1.3.6.1.4.1.4526.17.26.17.1.1.6 | ColumnrlIpStaticRouteType | read-write | current | The type of route. Note that local(3) refers to a route for which the next hop is the final destination this is the case when user overides the a local interfa… |
| 1.3.6.1.4.1.4526.17.26.17.1.1.7 | ColumnrlIpStaticRouteNextHopAS | read-write | current | The Autonomous System Number of the Next Hop. The semantics of this object are determined by the routing-protocol specified in the route's ipCidrRouteProto val… |
| 1.3.6.1.4.1.4526.17.26.17.1.1.8 | ColumnrlIpStaticRouteForwardingStatus | read-only | current | active - An indication that the route has implication on routing inactive - the route is a backup route or it is down. It is not used in forwarding decision. D… |
| 1.3.6.1.4.1.4526.17.26.17.1.1.9 | ColumnrlIpStaticRouteRowStatus | read-write | current | The row status variable, used according to row installation and removal conventions. |
| 1.3.6.1.4.1.4526.17.26.17.1.1.10 | ColumnrlIpStaticRouteOwner | read-only | current | Static - The route is configured over Static IP. This route is written to configuration files. Dhcp - The route is Configured by DHCP (received as part of DHCP… |
| 1.3.6.1.4.1.4526.17.26.18 | NoderlIpRouter | |||
| 1.3.6.1.4.1.4526.17.26.23 | ScalarrlIpAddressesNumber | read-only | current | This variable specifies current number of entries in rsIpAddrTable. |
| 1.3.6.1.4.1.4526.17.26.24 | ScalarrlIpStaticPrefixesNumber | read-only | current | This variable specifies current number of static prefixes in the system. |
| 1.3.6.1.4.1.4526.17.26.25 | ScalarrlIpTotalPrefixesNumber | read-only | current | This variable specifies current total number of prefixes in the system. |
| 1.3.6.1.4.1.4526.17.26.32 | ScalarrlManagementIpv4 | read-write | current | The system management IPv4 address which is kept between system modes changes |
| 1.3.6.1.4.1.4526.17.26.33 | ScalarrlManagementIpv4Action | read-write | current | The system management IPv4 action: clear - delete all ipv4 interfaces from startup configuration database except rlManagementIpv4 |
| 1.3.6.1.4.1.4526.17.26.34 | ScalarrlManagementIpIfindex | read-write | current | The system management IPs addresses ifIndex which is kept between system modes changes |
| 1.3.6.1.4.1.4526.17.26.35 | TablerlSourceAddressSelectionTable | not-accessible | current | The table specifies IPv4 and IPv6 source interfaces per application. Only supported applications are present in the table. |
| 1.3.6.1.4.1.4526.17.26.35.1 | RowrlSourceAddressSelectionEntry | not-accessible | current | The row definition for this table. |
| 1.3.6.1.4.1.4526.17.26.35.1.1 | ColumnrlSourceAddressSelectionApp | not-accessible | current | The application which source interfaces are defined in the entry. |
| 1.3.6.1.4.1.4526.17.26.35.1.2 | ColumnrlSourceAddressSelectionInterfaceIPv4 | read-write | current | The ifIndex value of source interface for IPv4 address. Zero means the interface is undefined. |
| 1.3.6.1.4.1.4526.17.26.35.1.3 | ColumnrlSourceAddressSelectionInterfaceIPv6 | read-write | current | The ifIndex value of source interface for IPv6 address. Zero means the interface is undefined. |
| 1.3.6.1.4.1.4526.17.26.36 | TablerlIpAddressTable | not-accessible | current | This table is parralel to MIB II ipAddressTable, and is used to add/delete entries to/from that table. The table contains addressing information relevant to th… |
| 1.3.6.1.4.1.4526.17.26.36.1 | RowrlIpAddressEntry | not-accessible | current | An address mapping for a particular interface. |
| 1.3.6.1.4.1.4526.17.26.36.1.1 | ColumnrlIpAddressAddrType | not-accessible | current | The address type of rlIpAddressAddr. |
| 1.3.6.1.4.1.4526.17.26.36.1.2 | ColumnrlIpAddressAddr | not-accessible | current | The IP address to which this entry's addressing information pertains. The address type of this object is specified in rlIpAddressAddrType. In case of auto-conf… |
| 1.3.6.1.4.1.4526.17.26.36.1.3 | ColumnrlIpAddressOrigin | not-accessible | current | The origin of the address. |
| 1.3.6.1.4.1.4526.17.26.36.1.4 | ColumnrlIpAddressGeneralPrefixName | not-accessible | current | The name assigned to the prefix. |
| 1.3.6.1.4.1.4526.17.26.36.1.5 | ColumnrlIpAddressIfIndex | read-create | current | The index value that uniquely identifies the interface to which this entry is applicable. The interface identified by a particular value of this index is the s… |
| 1.3.6.1.4.1.4526.17.26.36.1.6 | ColumnrlIpAddressExtdType | read-create | current | Extend standard field ipAddressType to multicast |
| 1.3.6.1.4.1.4526.17.26.36.1.7 | ColumnrlIpAddressPrefix | read-only | current | A pointer to the row in the prefix table to which this address belongs. May be { 0 0 } if there is no such row. |
| 1.3.6.1.4.1.4526.17.26.36.1.8 | ColumnrlIpAddressStatus | read-create | current | The status of the address, describing if the address can be used for communication. In the absence of other information, an IPv4 address is always preferred(1). |
| 1.3.6.1.4.1.4526.17.26.36.1.9 | ColumnrlIpAddressCreated | read-only | current | The value of sysUpTime at the time this entry was created. If this entry was created prior to the last re- initialization of the local network management subsy… |
| 1.3.6.1.4.1.4526.17.26.36.1.10 | ColumnrlIpAddressLastChanged | read-only | current | The value of sysUpTime at the time this entry was last updated. If this entry was updated prior to the last re- initialization of the local network management … |
| 1.3.6.1.4.1.4526.17.26.36.1.11 | ColumnrlIpAddressRowStatus | read-create | current | The status of this conceptual row. The RowStatus TC requires that this DESCRIPTION clause states under which circumstances other objects in this row can be mod… |
| 1.3.6.1.4.1.4526.17.26.36.1.12 | ColumnrlIpAddressStorageType | read-create | current | The storage type for this conceptual row. If this object has a value of 'permanent', then no other objects are required to be able to be modified. |
| 1.3.6.1.4.1.4526.17.26.36.1.13 | ColumnrlIpAddressExtdPrefixLength | read-create | current | The prefix length of this address. |
| 1.3.6.1.4.1.4526.17.26.36.1.14 | ColumnrlIpAddressCompleteAddr | read-only | current | The Complete IP address to which this entry's addressing information pertains. In case of auto-configure address such as eui-64, general-prefix and others it c… |
| 1.3.6.1.4.1.4526.17.26.36.1.15 | ColumnrlIpAddressOperStatus | read-only | current | The current operational state of the IP address. |
| 1.3.6.1.4.1.4526.17.26.37 | ScalarrlIpDefaultDSCP | read-write | current | The default value inserted into the DSCP field of the IP header of datagrams originated at this entity, whenever a DSCP value is not supplied by the applicatio… |
| 1.3.6.1.4.1.4526.17.26.38 | ScalarrlIpDefaultUP | read-write | current | The default value inserted into the User Priority field in the 802.1q VLAN tag of IPv4 frames sent by the CPU. |
| 1.3.6.1.4.1.4526.17.26.39 | ScalarrlIpv4MtuSize | read-write | current | Sets the maximum transmission unit (MTU) size in bytes of IPv4 packets (payload). |
Type Definitions
| Name | Syntax | Status | Description |
|---|---|---|---|
| RlIpAddressOriginTC | INTEGER { other(1), manual(2), dhcp(4), linklayer(5), random(6), autoConfig(7), eui64(8), tunnelIsatap(9), tunnel6to4(10), generalPrefix(11) } | current | The origin of the address. following are same as ipAddressOriginTC in standard MIB: manual(2) indicates that the address was manually configured to a specified address, e.g., by user configuration. dhcp(4) indicates an … |