NETI-ITS-MIB
147 objects
Reference: NID757. MIB for Isochronous Transport Services (ITS). ITS provides transport of isochronous (time sensitive) traffic across the DTM network in a transparent way. All the bits are transported unmodified with preserved timing information. The following services are all regarded as ITS: - PDH primary rates - Video (DVB/SD-SDI/HD-SDI) - Audio (AES-EBU) - SDH transport The MIB includes three primary conceptual tables; for configuring the trail termination points on the originating (source) and terminating (sink) side of the connection, and for configuring the interfaces. The table itsSrcTtpTable defines the trail termination points for the originating (source) side. The table itsSnkTtpTable defines the trail termination points for the terminating (sink) side. The table itsIfTable defines the interfaces. In addition to the itsIfTable, there are dedicated tables for technology specific configuration objects. The interconnection between the trail termination points shall be done through configuration in the Channel Manager MIB (NETI-CHMGR-MIB). A bi-directional connections are handled by creating two uni-directional connections, one in each direction, between the trail termination points.
Imported Objects
| NETI-CHMGR-MIB | Dsti |
| NETI-COMMON-MIB | netiExperimentalGeneric |
| SNMP-FRAMEWORK-MIB | SnmpAdminString |
| SNMPv2-SMI | Gauge32 Integer32 MODULE-IDENTITY OBJECT-TYPE Unsigned32 |
| SNMPv2-TC | RowPointer RowStatus TEXTUAL-CONVENTION TimeStamp TruthValue |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.2928.6.2.16 | IdentitynetiItsMIB | Reference: NID757. MIB for Isochronous Transport Services (ITS). ITS provides transport of isochronous (time sensitive) traffic across the DTM network in a tra… | ||
| 1.3.6.1.4.1.2928.6.2.16.1 | NodeitsObjects | |||
| 1.3.6.1.4.1.2928.6.2.16.1.1 | NodeitsIfGroup | |||
| 1.3.6.1.4.1.2928.6.2.16.1.1.1 | ScalaritsIfLastChange | read-only | current | The value of sysUpTime of the last change of any object in the itsIfTable. |
| 1.3.6.1.4.1.2928.6.2.16.1.1.2 | TableitsIfTable | not-accessible | current | Table with all service interfaces that is detected by the device. The table contains configuration objects common to all types of interfaces. |
| 1.3.6.1.4.1.2928.6.2.16.1.1.2.1 | RowitsIfEntry | not-accessible | current | One interface is represented by one conceptual row in the table. Rx and Tx is always relative the application domain. |
| 1.3.6.1.4.1.2928.6.2.16.1.1.2.1.1 | ColumnitsIfIndex | not-accessible | current | The index in the table. The index is maintained across re-boots. The index is a positive integer value. |
| 1.3.6.1.4.1.2928.6.2.16.1.1.2.1.2 | ColumnitsIfIfIndex | read-only | current | A reference to the index in the ifTable in the IF-MIB. If this is not known, the value is 0. |
| 1.3.6.1.4.1.2928.6.2.16.1.1.2.1.3 | ColumnitsIfName | read-only | current | The textual name of the interface. The value of this object should be the name of the interface as assigned by the local device and should be suitable for use … |
| 1.3.6.1.4.1.2928.6.2.16.1.1.2.1.4 | ColumnitsIfDescr | read-only | current | A textual string containing information about the interface. This string should include the name of the manufacturer, the product name and the version of the i… |
| 1.3.6.1.4.1.2928.6.2.16.1.1.2.1.5 | ColumnitsIfSpeed | read-only | current | The interface's capacity in bits per second. This value would be the same as presented by the object ifSpeed in the ifTable. |
| 1.3.6.1.4.1.2928.6.2.16.1.1.2.1.6 | ColumnitsIfSuppressAlarm | read-write | current | The alarm suppression mode. When alarms are suppressed, no alarms will be generated if a fault situation is detected on the interface. Failures will still be s… |
| 1.3.6.1.4.1.2928.6.2.16.1.1.2.1.7 | ColumnitsIfLoopMode | read-write | current | Loop-back mode of the interface. When the loop-back mode is changed to line(2) or dtm(3), a timer is initialized with the value of itsIfLoopTime. The loop-back… |
| 1.3.6.1.4.1.2928.6.2.16.1.1.2.1.8 | ColumnitsIfLoopTime | read-write | deprecated | Timer for the loop-back mode. The loop-back mode is reset to its normal mode none(0) after the specified number of seconds. A timer value of 0 indicates infini… |
| 1.3.6.1.4.1.2928.6.2.16.1.1.2.1.9 | ColumnitsIfCapabilities | read-only | current | Capabilities of the interface. The corresponding bit is set if the capability is supported by the interface. multicast(0). It is possible to use in multicast c… |
| 1.3.6.1.4.1.2928.6.2.16.1.1.2.1.10 | ColumnitsIfProperties | read-write | current | Properties on the interface. A property can only be set if the interface supports has the corresponding capability. The capabilities of the interface can be de… |
| 1.3.6.1.4.1.2928.6.2.16.1.1.2.1.11 | ColumnitsIfDefects | read-only | current | Defects indicated on the interface since the last time the object was read. los(0) Loss of Signal was detected. lof(1) Loss of Frame was detected. ais(2). Alar… |
| 1.3.6.1.4.1.2928.6.2.16.1.1.2.1.12 | ColumnitsIfFailure | read-only | current | A textual string describing a fault status on the interface. The object presents an empty string if there are no faults on the interface. |
| 1.3.6.1.4.1.2928.6.2.16.1.1.2.1.13 | ColumnitsIfPMReference | read-only | current | A reference to an object that presents performance data for the interface. The object is not part of this MIB. |
| 1.3.6.1.4.1.2928.6.2.16.1.1.2.1.14 | ColumnitsIfOperStatus | read-only | current | The operational state of the interface. This is the same as the object ifOperStatus in the ifTable. up(1). The interface passes data and is used by a TTP. down… |
| 1.3.6.1.4.1.2928.6.2.16.1.1.2.1.15 | ColumnitsIfTxMuteOnFault | read-write | current | Controls the interface output in case of a fault. notSupported(0). The interface does not support control of transmitter on fault. This value can only be read,… |
| 1.3.6.1.4.1.2928.6.2.16.1.1.2.1.16 | ColumnitsIfPurpose | read-only | current | A string presenting the purpose of the TTP that is actively (trying) to use the interface. If no TTP is using the interface, then the purpose is empty. If an i… |
| 1.3.6.1.4.1.2928.6.2.16.1.1.2.1.17 | ColumnitsIfInterfaceType | read-only | current | Denotes the type of interface. |
| 1.3.6.1.4.1.2928.6.2.16.1.1.2.1.18 | ColumnitsIfMembersSrc | read-only | current | A list of values of the itsSrcTtpIndex for the source trail termination points (TTPs) that are actively connected to this interface. A TTP can only be connecte… |
| 1.3.6.1.4.1.2928.6.2.16.1.1.2.1.19 | ColumnitsIfMembersSnk | read-only | current | A list of values of the itsSnkTtpIndex for the sink trail termination points (TTPs) that are actively connected to this interface. A TTP can only be connected … |
| 1.3.6.1.4.1.2928.6.2.16.1.1.3 | TableitsIfPdhTable | not-accessible | current | Table with PDH interfaces. The table contains configuration objects specific for PDH interfaces. The table is indexed using the same index as the itsIfTable. |
| 1.3.6.1.4.1.2928.6.2.16.1.1.3.1 | RowitsIfPdhEntry | not-accessible | current | One PDH interface is represented by one conceptual row in the table. The interface is also represented in the itsIfTable using the same index. |
| 1.3.6.1.4.1.2928.6.2.16.1.1.3.1.1 | ColumnitsIfPdhSignal | read-write | current | Selects type of signal to transport, E3 or DS3. |
| 1.3.6.1.4.1.2928.6.2.16.1.1.3.1.2 | ColumnitsIfPdhFraming | read-write | current | Selects the type of framing to use. The valid values depend on selection of type on `itsIfPdhType'. none(1). No framing. g751(2). Only valid for E3. g832(3). O… |
| 1.3.6.1.4.1.2928.6.2.16.1.1.4 | TableitsIfSdhTable | not-accessible | current | Table with SDH interfaces. The table contains configuration objects specific for SDH interfaces. The table is indexed using the same index as the itsIfTable. |
| 1.3.6.1.4.1.2928.6.2.16.1.1.4.1 | RowitsIfSdhEntry | not-accessible | current | One SDH interface is represented by one conceptual row in the table. The interface is also represented in the itsIfTable using the same index. |
| 1.3.6.1.4.1.2928.6.2.16.1.1.4.1.1 | ColumnitsIfSdhTiming | read-write | current | Selects timing mode for the interface, i.e. clock source in transmission path. |
| 1.3.6.1.4.1.2928.6.2.16.1.1.4.1.2 | ColumnitsIfSdhMode | read-write | current | Sets SDH or SONET interface mode. |
| 1.3.6.1.4.1.2928.6.2.16.1.1.4.1.3 | ColumnitsIfSdhSs | read-write | current | Payload mapping type. |
| 1.3.6.1.4.1.2928.6.2.16.1.1.4.1.4 | ColumnitsIfSdhS1 | read-write | current | Synchronization message to send to external equipment in transmission path. This defines the quality level of the clock used to transmit data. |
| 1.3.6.1.4.1.2928.6.2.16.1.1.4.1.5 | ColumnitsIfSdhSoh | read-only | current | A string containing the values of some section overhead bytes. The byte values are on the format byte name, equal sign, byte value. The values are then separat… |
| 1.3.6.1.4.1.2928.6.2.16.1.1.4.1.6 | ColumnitsIfSdhPoh | read-only | current | A string containing the values of some path overhead bytes. The byte values are on the format byte name, equal sign, byte value. The values are then separated … |
| 1.3.6.1.4.1.2928.6.2.16.1.1.4.1.7 | ColumnitsIfSdhJc | read-only | current | A string containing the values of some justification counters. The byte values are on the format counter name, equal sign, byte value. The values are then sepa… |
| 1.3.6.1.4.1.2928.6.2.16.1.1.5 | TableitsIfDvbTable | not-accessible | current | Table with DVB interfaces. The table contains configuration objects specific for DVB interfaces. The table is indexed using the same index as the itsIfTable. |
| 1.3.6.1.4.1.2928.6.2.16.1.1.5.1 | RowitsIfDvbEntry | not-accessible | current | One DVB interface is represented by one conceptual row in the table. The interface is also represented in the itsIfTable using the same index. |
| 1.3.6.1.4.1.2928.6.2.16.1.1.5.1.1 | ColumnitsIfDvbFormat | read-only | current | A textual string in a non-formal format describing the format of the data. |
| 1.3.6.1.4.1.2928.6.2.16.1.1.5.1.2 | ColumnitsIfDvbOutputMode | read-write | current | Selects output mode. |
| 1.3.6.1.4.1.2928.6.2.16.1.1.6 | TableitsIfAesTable | not-accessible | current | Table with AES interfaces. The table contains configuration objects specific for AES interfaces. The table is indexed using the same index as the itsIfTable. |
| 1.3.6.1.4.1.2928.6.2.16.1.1.6.1 | RowitsIfAesEntry | not-accessible | current | One AES interface is represented by one conceptual row in the table. |
| 1.3.6.1.4.1.2928.6.2.16.1.1.6.1.1 | ColumnitsIfAesIsTimingProvider | read-write | current | Selects whether the interface will be used primarily as as timing provider for other interfaces on the same board. This object is applicable only if the interf… |
| 1.3.6.1.4.1.2928.6.2.16.1.1.6.1.2 | ColumnitsIfAesReference | read-write | current | Selects the source interface to use as timing reference for output alignment. The source can be any other interface on the same board except itself. The value … |
| 1.3.6.1.4.1.2928.6.2.16.1.1.7 | TableitsIfSdiTable | not-accessible | current | Table with SDI video interfaces. The table contains configuration objects specific to SDI interfaces. The table is indexed using the same index as the itsIfTab… |
| 1.3.6.1.4.1.2928.6.2.16.1.1.7.1 | RowitsIfSdiEntry | not-accessible | current | One SDI interface is represented by one conceptual row in the table. The interface is also represented in the itsIfTable using the same index. |
| 1.3.6.1.4.1.2928.6.2.16.1.1.7.1.1 | ColumnitsIfSdiFormat | read-only | current | Video source format. The format is presented as `<pixels-per-line>x<lines-per-frame><i/p> @ <freq> Hz' E.g. `1920x1080p @ 30 Hz' The string is empty if no form… |
| 1.3.6.1.4.1.2928.6.2.16.1.1.7.1.2 | ColumnitsIfSdiAutoSense | read-write | current | Controls whether autosense of the input/output signal shall be enabled or not. notSupported(0). The interface does not support autosense. enable(1). Autosense … |
| 1.3.6.1.4.1.2928.6.2.16.1.1.7.1.3 | ColumnitsIfSdiIsTimingProvider | read-write | current | Selects whether the interface will be used primarily as as timing provider for other interfaces on the same board. This object is applicable only if the interf… |
| 1.3.6.1.4.1.2928.6.2.16.1.1.7.1.4 | ColumnitsIfSdiReference | read-write | current | Selects the source interface to use as timing reference for output alignment. The source can be any interface on the same board. The value is the relative inte… |
| 1.3.6.1.4.1.2928.6.2.16.1.1.7.1.5 | ColumnitsIfSdiFsVDelay | read-write | obsolete | Adjusts the vertical output delay in number of lines. This object is applicable only if the interface supports reference locking, i.e. if the `ref' bit is set … |
| 1.3.6.1.4.1.2928.6.2.16.1.1.7.1.6 | ColumnitsIfSdiFsHDelay | read-write | obsolete | Adjusts the horizontal output delay in number of pixels. This object is applicable only if the interface supports reference locking, i.e. if the `ref' bit is s… |
| 1.3.6.1.4.1.2928.6.2.16.1.1.7.1.7 | ColumnitsIfSdiFsDelay | read-write | current | Adjusts the output delay in number of nanoseconds. This object is applicable only if the interface supports reference locking, i.e. if the `ref' bit is set in … |
| 1.3.6.1.4.1.2928.6.2.16.1.1.9 | TableitsIfMonTable | not-accessible | current | Table with monitor interfaces. The table contains configuration objects specific for monitor interfaces. A monitor interface is used for monitoring data on ano… |
| 1.3.6.1.4.1.2928.6.2.16.1.1.9.1 | RowitsIfMonEntry | not-accessible | current | One monitor port is represented by one conceptual row in the table. The interface is also represented in the itsIfTable using the same index. |
| 1.3.6.1.4.1.2928.6.2.16.1.1.9.1.1 | ColumnitsIfMonMonitoredInterface | read-write | current | The relative number of the interface on the board that this interface is selected to monitor. The first interface on the board is number 1, the second is numbe… |
| 1.3.6.1.4.1.2928.6.2.16.1.1.9.1.2 | ColumnitsIfMonDirection | read-write | current | The direction of the monitored interface. in(1). Monitors the input data of the monitored interface. out(2). Monitors the output data of the monitored interfac… |
| 1.3.6.1.4.1.2928.6.2.16.1.1.9.1.3 | ColumnitsIfEnableButton | read-write | current | Controls if a `monitor' push button on the device front panel is enabled for selection of interface to monitor. This object is only applicable for boards suppo… |
| 1.3.6.1.4.1.2928.6.2.16.1.1.10 | TableitsIfJ2kTable | not-accessible | current | Table with JPEG 2000 interfaces. The table contains configuration objects specific for JPEG 2000 encoding and decoding capable interfaces, i.e. when any of the… |
| 1.3.6.1.4.1.2928.6.2.16.1.1.10.1 | RowitsIfJ2kEntry | not-accessible | current | One JPEG 2000 capable interface is represented by one conceptual row in the table. The interface is also represented in the itsIfTable using the same index. |
| 1.3.6.1.4.1.2928.6.2.16.1.1.10.1.1 | ColumnitsIfJ2kEncoderEnable | read-write | current | Selects whether the JPEG 2000 encoder functionality is enabled of not for the interface. The rate of the JPEG 2000 stream is calculated from the channel capaci… |
| 1.3.6.1.4.1.2928.6.2.16.1.1.10.1.2 | ColumnitsIfJ2kDecoderActive | read-only | current | Indicates whether the JPEG 2000 decoder functionality is active or not. The interface acting as JPEG 2000 decoder is automatic. Only an egress interface can ac… |
| 1.3.6.1.4.1.2928.6.2.16.1.1.10.1.3 | ColumnitsIfJ2kSignalFormat | read-write | current | Indicates for which format JPEG 2000 is configured. The choice of format affects the available VBI configuration, the number of audio groups, and the configura… |
| 1.3.6.1.4.1.2928.6.2.16.1.1.10.1.4 | ColumnitsIfJ2kRateVideo | read-only | current | The actual JPEG 2000 code stream bit rate. Applicable for both encoder and decoder interfaces. |
| 1.3.6.1.4.1.2928.6.2.16.1.1.10.1.5 | ColumnitsIfJ2kRateVideoMax | read-only | current | The maximum JPEG 2000 code stream bit rate, calculated from the channel capacity, ANC, audio and VBI configurations. |
| 1.3.6.1.4.1.2928.6.2.16.1.1.10.1.6 | ColumnitsIfJ2kRateVbi | read-only | current | The VBI service bit rate detected and forwarded. |
| 1.3.6.1.4.1.2928.6.2.16.1.1.10.1.7 | ColumnitsIfJ2kRateAnc | read-only | current | The ancillary data bit rate detected and forwarded. |
| 1.3.6.1.4.1.2928.6.2.16.1.1.10.1.8 | ColumnitsIfJ2kRateAudio | read-only | current | The audio bit rate detected and forwarded. |
| 1.3.6.1.4.1.2928.6.2.16.1.1.10.1.9 | ColumnitsIfJ2kAudioSampleSize | read-write | current | The number of bits used for the audio samples: default 20-bit audio or extended 24-bit audio. This value is applicable only for SD-SDI signal format (PAL/NTSC)… |
| 1.3.6.1.4.1.2928.6.2.16.1.1.10.1.10 | ColumnitsIfJ2kReduceAudioTransportBitrate | read-write | current | Enables or disables enhanced audio transport, using a reduced transport bitrate for the audio. This is only applicable for HD and 3G format, and only when the … |
| 1.3.6.1.4.1.2928.6.2.16.1.1.11 | TableitsIfSdiAudioTable | not-accessible | current | Table with audio groups. The table contains configuration objects specific for audio groups in SDI streams. Each audio group consists of 4 audio channels. Audi… |
| 1.3.6.1.4.1.2928.6.2.16.1.1.11.1 | RowitsIfSdiAudioEntry | not-accessible | current | One audio group is represented by one conceptual row in the table. An entry may only exist for an interface that is capable of JPEG 2000, i.e. when any of the … |
| 1.3.6.1.4.1.2928.6.2.16.1.1.11.1.1 | ColumnitsIfSdiAudioIndex | not-accessible | current | Index in the table. The index specifies the audio group number. Index 5-8 is only available for 3G-SDI. |
| 1.3.6.1.4.1.2928.6.2.16.1.1.11.1.2 | ColumnitsIfSdiAudioForward | read-write | current | Indicates whether the audio group is enabled for transmission or not. Only applicable for source end interfaces. |
| 1.3.6.1.4.1.2928.6.2.16.1.1.12 | TableitsIfSdiVbiTable | not-accessible | current | Table with Vertical Blanking Interval (VBI); lines outside the actual picture that are used to forward data. The number of lines in the VBI depends on the form… |
| 1.3.6.1.4.1.2928.6.2.16.1.1.12.1 | RowitsIfSdiVbiEntry | not-accessible | current | One entry per VBI line. An entry may only exist for an interface that is capable of JPEG 2000, i.e. when any of the bits `j2kEnc' or `j2kDec' are set in `itsIf… |
| 1.3.6.1.4.1.2928.6.2.16.1.1.12.1.1 | ColumnitsIfSdiVbiIndex | not-accessible | current | The index in the table for the VBI line. This is not the same as the line number. |
| 1.3.6.1.4.1.2928.6.2.16.1.1.12.1.2 | ColumnitsIfSdiVbiLineNumber | read-only | current | The line number. |
| 1.3.6.1.4.1.2928.6.2.16.1.1.12.1.3 | ColumnitsIfSdiVbiForward | read-write | current | Indicates whether the VBI line number is enabled for forwarding or not. The value is applicable only for source interfaces. |
| 1.3.6.1.4.1.2928.6.2.16.1.1.13 | TableitsIfSdiAncTable | not-accessible | current | Table with ancillary data. This is embedded into the SDI signal but is not video. |
| 1.3.6.1.4.1.2928.6.2.16.1.1.13.1 | RowitsIfSdiAncEntry | not-accessible | current | One DID/SDID combination is represented by one conceptual row in the table. An entry may only exist for an interface that is capable of JPEG 2000, i.e. when an… |
| 1.3.6.1.4.1.2928.6.2.16.1.1.13.1.1 | ColumnitsIfSdiAncIndex | not-accessible | current | An index in the table, with one row per DID/SDID combination. |
| 1.3.6.1.4.1.2928.6.2.16.1.1.13.1.2 | ColumnitsIfSdiAncDescription | read-only | current | A string that identifies or describes the service corresponding to the DID/SDID combination. |
| 1.3.6.1.4.1.2928.6.2.16.1.1.13.1.3 | ColumnitsIfSdiAncDid | read-only | current | The Data ID. Identifies the type of ANC. If the value is less than 0x08 then the ancillary data is of type 2, which means that the SDID is also present and sho… |
| 1.3.6.1.4.1.2928.6.2.16.1.1.13.1.4 | ColumnitsIfSdiAncSdid | read-only | current | The Secondary Data ID. This has the value of 0 if the ancillary data is of type 1. |
| 1.3.6.1.4.1.2928.6.2.16.1.1.13.1.5 | ColumnitsIfSdiAncForward | read-write | current | Indicates if the DID/SDID combination is enabled for forwarding or not. The value is applicable only for source interfaces. |
| 1.3.6.1.4.1.2928.6.2.16.1.1.14 | TableitsIfPs3Table | not-accessible | current | Table with settings for hitless 1+1 protection. |
| 1.3.6.1.4.1.2928.6.2.16.1.1.14.1 | RowitsIfPs3Entry | not-accessible | current | One interface that is capable of hitless 1+1 protection is represented by one row in this table. An entry may only exist for an interface that is capable of sw… |
| 1.3.6.1.4.1.2928.6.2.16.1.1.14.1.1 | ColumnitsIfPs3DifferentialDelay | read-only | current | Measured differential delay in microseconds between the two paths. Zero (0) indicates that standby protection is used. |
| 1.3.6.1.4.1.2928.6.2.16.1.1.14.1.2 | ColumnitsIfPs3DifferentialDelayValid | read-only | current | Specifies if the value of itsIfPs3DifferentialDelay is valid or not. |
| 1.3.6.1.4.1.2928.6.2.16.1.1.14.1.3 | ColumnitsIfPs3AheadInterface | read-only | current | The index of the sink trail termination point (TTP) that is ahead. Minus one indicates either that information is not available or is invalid. |
| 1.3.6.1.4.1.2928.6.2.16.1.1.14.1.4 | ColumnitsIfPs3HitlessProtection | read-write | current | Specifies if hitless protection shall be attempted or not. true(1). Will attempt to reach a hitless protection state. false(2). Will only attempt to reach a st… |
| 1.3.6.1.4.1.2928.6.2.16.1.1.14.1.5 | ColumnitsIfPs3ProtectionStatus | read-only | current | The current protection state. |
| 1.3.6.1.4.1.2928.6.2.16.1.1.14.1.6 | ColumnitsIfPs3ExpectedProtectionStatus | read-write | current | The expected protection state. When the current protection state (see itsIfPs3ProtectionStatus) is lower than the expected protection state, an alarm is raised… |
| 1.3.6.1.4.1.2928.6.2.16.1.1.14.1.7 | ColumnitsIfPs3ForceHit | read-write | current | A write of zero (0) resets the buffers, and will therefore minimize the the latency penalty incurred by the 1+1 buffering. |
| 1.3.6.1.4.1.2928.6.2.16.1.1.14.1.8 | ColumnitsIfPs3ActiveInterface | read-write | current | The index of the sink trail termination point (TTP) that is is selected as source. Minus one indicates either that information is not available or is invalid. |
| 1.3.6.1.4.1.2928.6.2.16.1.1.14.1.9 | ColumnitsIfPs3MaxExpDifferentialDelay | read-write | current | Maximum expected differential delay in milliseconds where 0 (zero) implies largest possible value for channel capacity and service type. If measured differenti… |
| 1.3.6.1.4.1.2928.6.2.16.1.2 | NodeitsSourceGroup | |||
| 1.3.6.1.4.1.2928.6.2.16.1.2.1 | ScalaritsSrcTtpLastChange | read-only | current | The value of sysUpTime of the last change of any object in the itsSrcTtpTable. |
| 1.3.6.1.4.1.2928.6.2.16.1.2.2 | ScalaritsSrcTtpNextIndex | read-only | current | The value of the next available index for an entry in the itsSrcTtpTable. |
| 1.3.6.1.4.1.2928.6.2.16.1.2.3 | TableitsSrcTtpTable | not-accessible | current | Table with source trail termination points. |
| 1.3.6.1.4.1.2928.6.2.16.1.2.3.1 | RowitsSrcTtpEntry | not-accessible | current | One conceptual row represents one source trail termination point. |
| 1.3.6.1.4.1.2928.6.2.16.1.2.3.1.1 | ColumnitsSrcTtpIndex | not-accessible | current | The index in the table. The index is persistent cross reboots. |
| 1.3.6.1.4.1.2928.6.2.16.1.2.3.1.2 | ColumnitsSrcTtpName | read-only | current | The textual name of the trail termination point (TTP). The value of this object should be the name of the TTP as assigned by the local device and should be sui… |
| 1.3.6.1.4.1.2928.6.2.16.1.2.3.1.3 | ColumnitsSrcTtpCustomerId | read-write | current | A customer identification number that represents the customer or user of the trail termination point (TTP). The value could be used e.g. for identifying the cu… |
| 1.3.6.1.4.1.2928.6.2.16.1.2.3.1.4 | ColumnitsSrcTtpPurpose | read-write | current | A string describing the purpose of the TTP. The string is for administrative use. |
| 1.3.6.1.4.1.2928.6.2.16.1.2.3.1.5 | ColumnitsSrcTtpLocalIf | read-write | current | A reference to the local interface that shall be used by the trail termination point (TTP). The value is representing the index in the itsIfTable. The value mu… |
| 1.3.6.1.4.1.2928.6.2.16.1.2.3.1.6 | ColumnitsSrcTtpLocalDsti | read-write | current | The DSTI (DTM Service Type Instance) for the source trail termination point. The value is used by the connection to refer to this trail termination point. The … |
| 1.3.6.1.4.1.2928.6.2.16.1.2.3.1.7 | ColumnitsSrcTtpMode | read-create | current | The TTP mode. The associated interface, itsSrcTtpLocalIf, must have the capability to support the property when the administrative state of the TTP is set to u… |
| 1.3.6.1.4.1.2928.6.2.16.1.2.3.1.8 | ColumnitsSrcTtpODescription | read-only | current | A reference to the corresponding description of the connection in the chmgrODescriptionTable in the Channel Manager MIB (NETI-CHMGR-MIB). The value is the inde… |
| 1.3.6.1.4.1.2928.6.2.16.1.2.3.1.9 | ColumnitsSrcTtpOConnection | read-only | current | A reference to the corresponding originating connection in the table chmgrOConnectionTable in the Channel Manager MIB (NETI-CHMGR-MIB). When an originating con… |
| 1.3.6.1.4.1.2928.6.2.16.1.2.3.1.10 | ColumnitsSrcTtpFailure | read-only | current | A textual string describing a fault status on the trail termination point (TTP). A configuration error is regarded as a fault state, which is indicated when th… |
| 1.3.6.1.4.1.2928.6.2.16.1.2.3.1.11 | ColumnitsSrcTtpAdminStatus | read-write | current | The administrative state of the connection. The value controls the desired state of the connection from the trail termination point (TTP). Note that the associ… |
| 1.3.6.1.4.1.2928.6.2.16.1.2.3.1.12 | ColumnitsSrcTtpOperStatus | read-only | current | The operational state of the trail termination point (TTP). up(1). The TTP is up and a connection is established to all destinations. If the connection is 1+1 … |
| 1.3.6.1.4.1.2928.6.2.16.1.2.3.1.13 | ColumnitsSrcTtpRowStatus | read-create | current | See SNMPv2-TC. Use itsSrcTtpAdminStatus to activate and de-activate a connection. The following values are supported: active(1). The object always reads active… |
| 1.3.6.1.4.1.2928.6.2.16.1.2.4 | TableitsSrcIndexLookupTable | not-accessible | current | Table to lookup a DSTI to an index in the itsSrcTtpTable. |
| 1.3.6.1.4.1.2928.6.2.16.1.2.4.1 | RowitsSrcIndexLookupEntry | not-accessible | current | One conceptual row represents one lookup entry. |
| 1.3.6.1.4.1.2928.6.2.16.1.2.4.1.1 | ColumnitsSrcIndexLookupIndex | read-only | current | The value refers to the index in table itsSrcTtpTable. |
| 1.3.6.1.4.1.2928.6.2.16.1.3 | NodeitsSinkGroup | |||
| 1.3.6.1.4.1.2928.6.2.16.1.3.1 | ScalaritsSnkTtpLastChange | read-only | current | The value of sysUpTime of the last change of any object in the itsSnkTtpTable. |
| 1.3.6.1.4.1.2928.6.2.16.1.3.2 | ScalaritsSnkTtpNextIndex | read-only | current | The value of the next available index for an entry in the itsSnkTtpTable. |
| 1.3.6.1.4.1.2928.6.2.16.1.3.3 | TableitsSnkTtpTable | not-accessible | current | Table with sink trail termination points. |
| 1.3.6.1.4.1.2928.6.2.16.1.3.3.1 | RowitsSnkTtpEntry | not-accessible | current | One conceptual row represents one sink trail termination point. |
| 1.3.6.1.4.1.2928.6.2.16.1.3.3.1.1 | ColumnitsSnkTtpIndex | not-accessible | current | The index in the table. The index is persistent across reboots. |
| 1.3.6.1.4.1.2928.6.2.16.1.3.3.1.2 | ColumnitsSnkTtpName | read-only | current | The textual name of the trail termination point (TTP). The value of this object should be the name of the TTP as assigned by the local device and should be sui… |
| 1.3.6.1.4.1.2928.6.2.16.1.3.3.1.3 | ColumnitsSnkTtpCustomerId | read-write | current | A customer identification number that represents the customer or user of the trail termination point (TTP). The value could be used e.g. for identifying the cu… |
| 1.3.6.1.4.1.2928.6.2.16.1.3.3.1.4 | ColumnitsSnkTtpPurpose | read-write | current | A string describing the purpose of the TTP. The object use is for administrative purpose. |
| 1.3.6.1.4.1.2928.6.2.16.1.3.3.1.5 | ColumnitsSnkTtpLocalIf | read-write | current | A reference to the local interface that shall be used by the trail termination point (TTP). The value is representing the index in the itsIfTable. The value mu… |
| 1.3.6.1.4.1.2928.6.2.16.1.3.3.1.6 | ColumnitsSnkTtpLocalDsti | read-write | current | The DSTI (DTM Service Type Instance) for the sink trail termination point. The value is used by the connection to refer to this trail termination point. The DS… |
| 1.3.6.1.4.1.2928.6.2.16.1.3.3.1.7 | ColumnitsSnkTtpPSActiveChannel | read-write | current | The channel to use on a 1+1 protected connection. When a connection is being established, the first established channel will become the active channel. The dev… |
| 1.3.6.1.4.1.2928.6.2.16.1.3.3.1.8 | ColumnitsSnkTtpSuppressAlarm | read-write | current | The alarm suppression mode. When alarms are suppressed, no alarms will be generated if a fault situation is detected on the trail termination point (TTP). Fail… |
| 1.3.6.1.4.1.2928.6.2.16.1.3.3.1.9 | ColumnitsSnkTtpTConnection | read-only | current | A reference to the corresponding terminating connection in the table chmgrTConnectionTable in the Channel Manager MIB (NETI-CHMGR-MIB). The value is the index … |
| 1.3.6.1.4.1.2928.6.2.16.1.3.3.1.10 | ColumnitsSnkTtpDefects | read-only | current | Defects indicated on the trail termination point since the last time the object was read. los(0) Loss of Signal was detected. lof(1) Loss of Frame was detected… |
| 1.3.6.1.4.1.2928.6.2.16.1.3.3.1.11 | ColumnitsSnkTtpFailure | read-only | current | A textual string describing a fault status on the trail termination point (TTP). A configuration error is regarded as a fault state, which is indicated when th… |
| 1.3.6.1.4.1.2928.6.2.16.1.3.3.1.12 | ColumnitsSnkTtpPMReference | read-only | current | A reference to an object that presents performance data for the trail termination point. The object is not part of this MIB. If the selected local interface (i… |
| 1.3.6.1.4.1.2928.6.2.16.1.3.3.1.13 | ColumnitsSnkTtpAdminStatus | read-write | current | The administrative state of the connection. The value controls the desired state of the connection from the trail termination point (TTP). up(1). The connectio… |
| 1.3.6.1.4.1.2928.6.2.16.1.3.3.1.14 | ColumnitsSnkTtpOperStatus | read-only | current | The operational state of the trail termination point (TTP). up(1). The TTP is up and a connection is established to all destinations. down(2). The connection i… |
| 1.3.6.1.4.1.2928.6.2.16.1.3.3.1.15 | ColumnitsSnkTtpRowStatus | read-create | current | See SNMPv2-TC. Use itsSnkTtpAdminStatus to activate and de-activate a connection. The following values are supported: active(1). The object always reads active… |
| 1.3.6.1.4.1.2928.6.2.16.1.3.3.1.16 | ColumnitsSnkTtpTConnection2 | read-only | current | A reference to the corresponding terminating connection in the table chmgrTConnectionTable in the Channel Manager MIB (NETI-CHMGR-MIB) for the second establish… |
| 1.3.6.1.4.1.2928.6.2.16.1.3.3.1.17 | ColumnitsSnkTtpPSAllow | read-write | current | Controls if termination of an 1+1 is allowed: true(1). Allows termination of two channels or connections for a 1+1 protected service. false(2). Denies terminat… |
| 1.3.6.1.4.1.2928.6.2.16.1.3.4 | TableitsSnkIndexLookupTable | not-accessible | current | Table to lookup a DSTI to an index in the itsSnkTtpTable. |
| 1.3.6.1.4.1.2928.6.2.16.1.3.4.1 | RowitsSnkIndexLookupEntry | not-accessible | current | One conceptual row represents one lookup entry. |
| 1.3.6.1.4.1.2928.6.2.16.1.3.4.1.1 | ColumnitsSnkIndexLookupIndex | read-only | current | The value refers to the index in table itsSnkTtpTable. |
Type Definitions
| Name | Syntax | Status | Description |
|---|---|---|---|
| ItsProtectionStatus | INTEGER { unavailable(1), unprotected(2), standbyProtected(3), hitlessCapable(4), hitlessProtected(5) } | current | Describes the protection status of a protected service. unavailable(1). means that neither channel is up. unprotected(2). means that one of the channels is up. standbyProtected(3). means that both channels are up and if… |
| ItsTtpIndexList | OCTET STRING (SIZE(0|4|8)) | current | A list of Integer32 values, where each 4 octets represents one Integer32 value. Each value represents an index into a table. |