NETI-PM-MIB
188 objects
The Net Insight PM (Performance Monitoring) MIB. The MIB implements objects for monitoring the performance of trunk interfaces, access interfaces and channels according to G.826.
Imported Objects
| NETI-COMMON-MIB | netiExperimentalGeneric |
| SNMPv2-CONF | OBJECT-GROUP |
| SNMPv2-SMI | Counter32 Gauge32 MODULE-IDENTITY OBJECT-TYPE Unsigned32 |
| SNMPv2-TC | DateAndTime DisplayString TEXTUAL-CONVENTION TruthValue |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.2928.6.2.17 | IdentitynetiPMMIB | The Net Insight PM (Performance Monitoring) MIB. The MIB implements objects for monitoring the performance of trunk interfaces, access interfaces and channels … | ||
| 1.3.6.1.4.1.2928.6.2.17.1 | NodenetiPMMIBObjects | |||
| 1.3.6.1.4.1.2928.6.2.17.1.1 | NodepmTifGroup | |||
| 1.3.6.1.4.1.2928.6.2.17.1.1.1 | TablepmTifTable | not-accessible | current | Table of Performance Monitored trunk interfaces |
| 1.3.6.1.4.1.2928.6.2.17.1.1.1.1 | RowpmTifEntry | not-accessible | current | One entry for each trunk interface |
| 1.3.6.1.4.1.2928.6.2.17.1.1.1.1.1 | ColumnpmTifIndex | not-accessible | current | The index uniquely identifying this trunk interface. |
| 1.3.6.1.4.1.2928.6.2.17.1.1.1.1.2 | ColumnpmTifAdminStatus | read-write | current | The desired state of the PM function. Affects the operative state of the PM object |
| 1.3.6.1.4.1.2928.6.2.17.1.1.1.1.3 | ColumnpmTifOperStatus | read-only | current | PM operative state. |
| 1.3.6.1.4.1.2928.6.2.17.1.1.1.1.4 | ColumnpmTifFailure | read-only | current | Shows current failure state. An empty string indicates no failure |
| 1.3.6.1.4.1.2928.6.2.17.1.1.1.1.5 | ColumnpmTifDataSource | read-only | current | The PM Data Source object |
| 1.3.6.1.4.1.2928.6.2.17.1.1.1.1.6 | ColumnpmTifDataSourceName | read-only | current | The name of the PM Data Source |
| 1.3.6.1.4.1.2928.6.2.17.1.1.1.1.7 | ColumnpmTifUatAlarmsEnabled | read-write | current | If set to `true(1)' then UAT alarms will be sent. Unavailable time (UAT) defines a state where a service is unable to perform its normal task due to severe err… |
| 1.3.6.1.4.1.2928.6.2.17.1.1.1.1.8 | ColumnpmTifTresholdAlarmsEnabled | read-write | current | If set to `true(1)' then threshold alarms will be sent. Each 15m and 24h current register counter can be assigned a threshold value. When crossed, a threshold … |
| 1.3.6.1.4.1.2928.6.2.17.1.1.1.1.9 | ColumnpmTifPeriodicEventsEnabled | read-write | current | If set to `true(1)' then History Periodic Events will be sent. |
| 1.3.6.1.4.1.2928.6.2.17.1.1.1.1.10 | ColumnpmTifZeroSuppressionEnabled | read-write | current | If set to `true(1)' then Zero Suppression mode is enabled Zero Suppression mode tells whether intervals with all current counters equal to zero shall be stored… |
| 1.3.6.1.4.1.2928.6.2.17.1.1.1.1.11 | ColumnpmTifHistorySize | read-write | current | The size of the history log |
| 1.3.6.1.4.1.2928.6.2.17.1.1.1.1.12 | ColumnpmTif15mTresholdES | read-write | current | 15 minute threshold value for ES. Current ES value equal to or above this threshold will raise a threshold alarm if enabled. A value of zero will disable thres… |
| 1.3.6.1.4.1.2928.6.2.17.1.1.1.1.13 | ColumnpmTif15mTresholdSES | read-write | current | 15 minute threshold value for SES. Current SES value equal to or above this threshold will raise a threshold alarm if enabled. A value of zero will disable thr… |
| 1.3.6.1.4.1.2928.6.2.17.1.1.1.1.14 | ColumnpmTif15mTresholdBBE | read-write | current | 15 minute threshold value for BBE. Current BBE value equal to or above this threshold will raise a threshold alarm if enabled. A value of zero will disable thr… |
| 1.3.6.1.4.1.2928.6.2.17.1.1.1.1.15 | ColumnpmTif15mTresholdSS | read-write | current | 15 minute threshold value for SS. Current SS value equal to or above this threshold will raise a threshold alarm if enabled. A value of zero will disable thres… |
| 1.3.6.1.4.1.2928.6.2.17.1.1.1.1.16 | ColumnpmTif24hTresholdES | read-write | current | 24 hour threshold value for ES. Current ES value equal to or above this threshold will raise a threshold alarm if enabled. A value of zero will disable thresho… |
| 1.3.6.1.4.1.2928.6.2.17.1.1.1.1.17 | ColumnpmTif24hTresholdSES | read-write | current | 24 hour threshold value for SES. Current SES value equal to or above this threshold will raise a threshold alarm if enabled. A value of zero will disable thres… |
| 1.3.6.1.4.1.2928.6.2.17.1.1.1.1.18 | ColumnpmTif24hTresholdBBE | read-write | current | 24 hour threshold value for BBE. Current BBE value equal to or above this threshold will raise a threshold alarm if enabled. A value of zero will disable thres… |
| 1.3.6.1.4.1.2928.6.2.17.1.1.1.1.19 | ColumnpmTif24hTresholdSS | read-write | current | 24 hour threshold value for SS. Current SS value equal to or above this threshold will raise a threshold alarm if enabled. A value of zero will disable thresho… |
| 1.3.6.1.4.1.2928.6.2.17.1.1.2 | TablepmTifCurrentTable | not-accessible | current | Table of PM data for the current 15 minute period |
| 1.3.6.1.4.1.2928.6.2.17.1.1.2.1 | RowpmTifCurrentEntry | not-accessible | current | One entry for each monitored object |
| 1.3.6.1.4.1.2928.6.2.17.1.1.2.1.2 | ColumnpmTifCurrentTime | read-only | current | Elapsed time in seconds for the current 15 minute period. |
| 1.3.6.1.4.1.2928.6.2.17.1.1.2.1.3 | ColumnpmTifCurrentSuspect | read-only | current | Is Suspect flag, if set to `true(1)' the current 15 minute measurement period has unreliable measurement data. |
| 1.3.6.1.4.1.2928.6.2.17.1.1.2.1.4 | ColumnpmTifCurrentZS | read-only | current | Zero Suppression Counter. If the performance monitoring uses zero suppression, this counter specifies how many fault free intervals have preceded the faulty on… |
| 1.3.6.1.4.1.2928.6.2.17.1.1.2.1.5 | ColumnpmTifCurrentESs | read-only | current | Number of Errored Seconds (ES) for the current 15 minute period. ES is defined as one second of available time containing one or more Errored Blocks (EB) or at… |
| 1.3.6.1.4.1.2928.6.2.17.1.1.2.1.6 | ColumnpmTifCurrentSESs | read-only | current | Number of Severe Errored Seconds (SES) for the current 15 minute period. SES is defined as one second of available time containing more than 30% Errored Blocks… |
| 1.3.6.1.4.1.2928.6.2.17.1.1.2.1.7 | ColumnpmTifCurrentBBEs | read-only | current | Number of Background Block Error (BBE) for the current 15 minute period. BBE is defined as the number of Errored Blocks (EB) during one second of available tim… |
| 1.3.6.1.4.1.2928.6.2.17.1.1.2.1.8 | ColumnpmTifCurrentUASs | read-only | current | Number of Unavailable Second (UAS) for the current 15 minute period. UAS is defined as one second of UAT (Unavailable Time). During UAT calculations of BBE, ES… |
| 1.3.6.1.4.1.2928.6.2.17.1.1.2.1.9 | ColumnpmTifCurrentSSs | read-only | current | Number of SLIP Second (SS) for the current 15 minute period. SS is defined as one second containing one or more SLIPs |
| 1.3.6.1.4.1.2928.6.2.17.1.1.3 | TablepmTif15mTable | not-accessible | current | Table of 15 minute PM log history |
| 1.3.6.1.4.1.2928.6.2.17.1.1.3.1 | RowpmTif15mEntry | not-accessible | current | One entry for each 15 minute PM interval |
| 1.3.6.1.4.1.2928.6.2.17.1.1.3.1.1 | ColumnpmTif15mIndex | not-accessible | current | The index that identifies the interval for which the set of statistics is available. Index of '0' indicates the most recently completed interval, and the index… |
| 1.3.6.1.4.1.2928.6.2.17.1.1.3.1.2 | ColumnpmTif15mTime | read-only | current | Time stamp for this 15 minute interval |
| 1.3.6.1.4.1.2928.6.2.17.1.1.3.1.3 | ColumnpmTif15mSuspect | read-only | current | Suspect flag for this 15 minute interval |
| 1.3.6.1.4.1.2928.6.2.17.1.1.3.1.4 | ColumnpmTif15mZS | read-only | current | Zero Suppression Counter. If the performance monitoring uses zero suppression, this counter specifies how many fault free intervals have preceded the faulty on… |
| 1.3.6.1.4.1.2928.6.2.17.1.1.3.1.5 | ColumnpmTif15mESs | read-only | current | Number of Errored Seconds (ES) for this 15 minute period. ES is defined as one second of available time containing one or more Errored Blocks (EB) or at least … |
| 1.3.6.1.4.1.2928.6.2.17.1.1.3.1.6 | ColumnpmTif15mSESs | read-only | current | Number of Severe Errored Seconds (SES) for this 15 minute period. SES is defined as one second of available time containing more than 30% Errored Blocks (EB) o… |
| 1.3.6.1.4.1.2928.6.2.17.1.1.3.1.7 | ColumnpmTif15mBBEs | read-only | current | Number of Background Block Error (BBE) for this 15 minute period. BBE is defined as the number of Errored Blocks (EB) during one second of available time not p… |
| 1.3.6.1.4.1.2928.6.2.17.1.1.3.1.8 | ColumnpmTif15mUASs | read-only | current | Number of Unavailable Second (UAS) for this 15 minute period. UAS is defined as one second of UAT (Unavailable Time). During UAT calculations of BBE, ES and SE… |
| 1.3.6.1.4.1.2928.6.2.17.1.1.3.1.9 | ColumnpmTif15mSSs | read-only | current | Number of SLIP Second (SS) for this 15 minute period. SS is defined as one second containing one or more SLIPs |
| 1.3.6.1.4.1.2928.6.2.17.1.1.4 | TablepmTif24hTable | not-accessible | current | Table of 24 hour PM log history |
| 1.3.6.1.4.1.2928.6.2.17.1.1.4.1 | RowpmTif24hEntry | not-accessible | current | One entry for each 24 hour PM interval |
| 1.3.6.1.4.1.2928.6.2.17.1.1.4.1.1 | ColumnpmTif24hIndex | not-accessible | current | The index that identifies the interval for which the set of statistics is available. Index of '0' indicates the most recently completed interval, and the index… |
| 1.3.6.1.4.1.2928.6.2.17.1.1.4.1.2 | ColumnpmTif24hTime | read-only | current | Time stamp for this 24 hour interval |
| 1.3.6.1.4.1.2928.6.2.17.1.1.4.1.3 | ColumnpmTif24hSuspect | read-only | current | Suspect flag for this 24 hour interval |
| 1.3.6.1.4.1.2928.6.2.17.1.1.4.1.4 | ColumnpmTif24hZS | read-only | current | Zero Suppression Counter. If the performance monitoring uses zero suppression, this counter specifies how many fault free intervals have preceded the faulty on… |
| 1.3.6.1.4.1.2928.6.2.17.1.1.4.1.5 | ColumnpmTif24hESs | read-only | current | Number of Errored Seconds (ES) for this 24 hour period. ES is defined as one second of available time containing one or more Errored Blocks (EB) or at least on… |
| 1.3.6.1.4.1.2928.6.2.17.1.1.4.1.6 | ColumnpmTif24hSESs | read-only | current | Number of Severe Errored Seconds (SES) for this 24 hour period. SES is defined as one second of available time containing more than 30% Errored Blocks (EB) or … |
| 1.3.6.1.4.1.2928.6.2.17.1.1.4.1.7 | ColumnpmTif24hBBEs | read-only | current | Number of Background Block Error (BBE) for this 24 hour period. BBE is defined as the number of Errored Blocks (EB) during one second of available time not par… |
| 1.3.6.1.4.1.2928.6.2.17.1.1.4.1.8 | ColumnpmTif24hUASs | read-only | current | Number of Unavailable Second (UAS) for this 24 hour period. UAS is defined as one second of UAT (Unavailable Time). During UAT calculations of BBE, ES and SES … |
| 1.3.6.1.4.1.2928.6.2.17.1.1.4.1.9 | ColumnpmTif24hSSs | read-only | current | Number of SLIP Second (SS) for this 24 hour period. SS is defined as one second containing one or more SLIPs |
| 1.3.6.1.4.1.2928.6.2.17.1.1.5 | TablepmTif24hCurrentTable | not-accessible | current | Table of PM data for the current 24 hour period |
| 1.3.6.1.4.1.2928.6.2.17.1.1.5.1 | RowpmTif24hCurrentEntry | not-accessible | current | One entry for each monitored object |
| 1.3.6.1.4.1.2928.6.2.17.1.1.5.1.2 | ColumnpmTif24hCurrentTime | read-only | current | Elapsed time in seconds for the current 24 hour period. |
| 1.3.6.1.4.1.2928.6.2.17.1.1.5.1.3 | ColumnpmTif24hCurrentSuspect | read-only | current | Is Suspect flag, if set to `true(1)' the current 24 hour measurement period has unreliable measurement data. |
| 1.3.6.1.4.1.2928.6.2.17.1.1.5.1.4 | ColumnpmTif24hCurrentZS | read-only | current | Zero Suppression Counter. If the performance monitoring uses zero suppression, this counter specifies how many fault free intervals have preceded the faulty on… |
| 1.3.6.1.4.1.2928.6.2.17.1.1.5.1.5 | ColumnpmTif24hCurrentESs | read-only | current | Number of Errored Seconds (ES) for the current 24 hour period. ES is defined as one second of available time containing one or more Errored Blocks (EB) or at l… |
| 1.3.6.1.4.1.2928.6.2.17.1.1.5.1.6 | ColumnpmTif24hCurrentSESs | read-only | current | Number of Severe Errored Seconds (SES) for the current 24 hour period. SES is defined as one second of available time containing more than 30% Errored Blocks (… |
| 1.3.6.1.4.1.2928.6.2.17.1.1.5.1.7 | ColumnpmTif24hCurrentBBEs | read-only | current | Number of Background Block Error (BBE) for the current 24 hour period. BBE is defined as the number of Errored Blocks (EB) during one second of available time … |
| 1.3.6.1.4.1.2928.6.2.17.1.1.5.1.8 | ColumnpmTif24hCurrentUASs | read-only | current | Number of Unavailable Second (UAS) for the current 24 hour period. UAS is defined as one second of UAT (Unavailable Time). During UAT calculations of BBE, ES a… |
| 1.3.6.1.4.1.2928.6.2.17.1.1.5.1.9 | ColumnpmTif24hCurrentSSs | read-only | current | Number of SLIP Second (SS) for the current 24 hour period. SS is defined as one second containing one or more SLIPs |
| 1.3.6.1.4.1.2928.6.2.17.1.2 | NodepmAifGroup | |||
| 1.3.6.1.4.1.2928.6.2.17.1.2.1 | TablepmAifTable | not-accessible | current | Table of Performance Monitored access interfaces |
| 1.3.6.1.4.1.2928.6.2.17.1.2.1.1 | RowpmAifEntry | not-accessible | current | One entry for each access interface |
| 1.3.6.1.4.1.2928.6.2.17.1.2.1.1.1 | ColumnpmAifIndex | not-accessible | current | The index uniquely identifying this access interface. |
| 1.3.6.1.4.1.2928.6.2.17.1.2.1.1.2 | ColumnpmAifAdminStatus | read-write | current | The desired state of the PM function. Affects the operative state of the PM object |
| 1.3.6.1.4.1.2928.6.2.17.1.2.1.1.3 | ColumnpmAifOperStatus | read-only | current | PM operative state. |
| 1.3.6.1.4.1.2928.6.2.17.1.2.1.1.4 | ColumnpmAifFailure | read-only | current | Shows current failure state. An empty string indicates no failure |
| 1.3.6.1.4.1.2928.6.2.17.1.2.1.1.5 | ColumnpmAifDataSource | read-only | current | The PM Data Source object |
| 1.3.6.1.4.1.2928.6.2.17.1.2.1.1.6 | ColumnpmAifDataSourceName | read-only | current | The name of the PM Data Source |
| 1.3.6.1.4.1.2928.6.2.17.1.2.1.1.7 | ColumnpmAifUatAlarmsEnabled | read-write | current | If set to `true(1)' then UAT alarms will be sent. Unavailable time (UAT) defines a state where a service is unable to perform its normal task due to severe err… |
| 1.3.6.1.4.1.2928.6.2.17.1.2.1.1.8 | ColumnpmAifTresholdAlarmsEnabled | read-write | current | If set to `true(1)' then threshold alarms will be sent. Each 15m and 24h current register counter can be assigned a threshold value. When crossed, a threshold … |
| 1.3.6.1.4.1.2928.6.2.17.1.2.1.1.9 | ColumnpmAifPeriodicEventsEnabled | read-write | current | If set to `true(1)' then History Periodic Events will be sent. |
| 1.3.6.1.4.1.2928.6.2.17.1.2.1.1.10 | ColumnpmAifZeroSuppressionEnabled | read-write | current | If set to `true(1)' then Zero Suppression mode is enabled Zero Suppression mode tells whether intervals with all current counters equal to zero shall be stored… |
| 1.3.6.1.4.1.2928.6.2.17.1.2.1.1.11 | ColumnpmAifHistorySize | read-write | current | The size of the history log |
| 1.3.6.1.4.1.2928.6.2.17.1.2.1.1.12 | ColumnpmAif15mTresholdES | read-write | current | 15 minute threshold value for ES. Current ES value equal to or above this threshold will raise a threshold alarm if enabled. A value of zero will disable thres… |
| 1.3.6.1.4.1.2928.6.2.17.1.2.1.1.13 | ColumnpmAif15mTresholdSES | read-write | current | 15 minute threshold value for SES. Current SES value equal to or above this threshold will raise a threshold alarm if enabled. A value of zero will disable thr… |
| 1.3.6.1.4.1.2928.6.2.17.1.2.1.1.14 | ColumnpmAif15mTresholdBBE | read-write | current | 15 minute threshold value for BBE. Current BBE value equal to or above this threshold will raise a threshold alarm if enabled. A value of zero will disable thr… |
| 1.3.6.1.4.1.2928.6.2.17.1.2.1.1.15 | ColumnpmAif24hTresholdES | read-write | current | 24 hour threshold value for ES. Current ES value equal to or above this threshold will raise a threshold alarm if enabled. A value of zero will disable thresho… |
| 1.3.6.1.4.1.2928.6.2.17.1.2.1.1.16 | ColumnpmAif24hTresholdSES | read-write | current | 24 hour threshold value for SES. Current SES value equal to or above this threshold will raise a threshold alarm if enabled. A value of zero will disable thres… |
| 1.3.6.1.4.1.2928.6.2.17.1.2.1.1.17 | ColumnpmAif24hTresholdBBE | read-write | current | 24 hour threshold value for BBE. Current BBE value equal to or above this threshold will raise a threshold alarm if enabled. A value of zero will disable thres… |
| 1.3.6.1.4.1.2928.6.2.17.1.2.2 | TablepmAifCurrentTable | not-accessible | current | Table of PM data for the current 15 minute period |
| 1.3.6.1.4.1.2928.6.2.17.1.2.2.1 | RowpmAifCurrentEntry | not-accessible | current | One entry for each monitored object |
| 1.3.6.1.4.1.2928.6.2.17.1.2.2.1.2 | ColumnpmAifCurrentTime | read-only | current | Elapsed time in seconds for the current 15 minute period. |
| 1.3.6.1.4.1.2928.6.2.17.1.2.2.1.3 | ColumnpmAifCurrentSuspect | read-only | current | Is Suspect flag, if set to `true(1)' the current 15 minute measurement period has unreliable measurement data. |
| 1.3.6.1.4.1.2928.6.2.17.1.2.2.1.4 | ColumnpmAifCurrentZS | read-only | current | Zero Suppression Counter. If the performance monitoring uses zero suppression, this counter specifies how many fault free intervals have preceded the faulty on… |
| 1.3.6.1.4.1.2928.6.2.17.1.2.2.1.5 | ColumnpmAifCurrentESs | read-only | current | Number of Errored Seconds (ES) for the current 15 minute period. ES is defined as one second of available time containing one or more Errored Blocks (EB) or at… |
| 1.3.6.1.4.1.2928.6.2.17.1.2.2.1.6 | ColumnpmAifCurrentSESs | read-only | current | Number of Severe Errored Seconds (SES) for the current 15 minute period. SES is defined as one second of available time containing more than 30% Errored Blocks… |
| 1.3.6.1.4.1.2928.6.2.17.1.2.2.1.7 | ColumnpmAifCurrentBBEs | read-only | current | Number of Background Block Error (BBE) for the current 15 minute period. BBE is defined as the number of Errored Blocks (EB) during one second of available tim… |
| 1.3.6.1.4.1.2928.6.2.17.1.2.2.1.8 | ColumnpmAifCurrentUASs | read-only | current | Number of Unavailable Second (UAS) for the current 15 minute period. UAS is defined as one second of UAT (Unavailable Time). During UAT calculations of BBE, ES… |
| 1.3.6.1.4.1.2928.6.2.17.1.2.3 | TablepmAif15mTable | not-accessible | current | Table of 15 minute PM interval history |
| 1.3.6.1.4.1.2928.6.2.17.1.2.3.1 | RowpmAif15mEntry | not-accessible | current | One entry for each 15 minute PM interval |
| 1.3.6.1.4.1.2928.6.2.17.1.2.3.1.1 | ColumnpmAif15mIndex | not-accessible | current | The index that identifies the interval for which the set of statistics is available. Index of '0' indicates the most recently completed interval, and the index… |
| 1.3.6.1.4.1.2928.6.2.17.1.2.3.1.2 | ColumnpmAif15mTime | read-only | current | Time stamp for this 15 minute interval |
| 1.3.6.1.4.1.2928.6.2.17.1.2.3.1.3 | ColumnpmAif15mSuspect | read-only | current | Suspect flag for this 15 minute interval |
| 1.3.6.1.4.1.2928.6.2.17.1.2.3.1.4 | ColumnpmAif15mZS | read-only | current | Zero Suppression Counter. If the performance monitoring uses zero suppression, this counter specifies how many fault free intervals have preceded the faulty on… |
| 1.3.6.1.4.1.2928.6.2.17.1.2.3.1.5 | ColumnpmAif15mESs | read-only | current | Number of Errored Seconds (ES) for this 15 minute period. ES is defined as one second of available time containing one or more Errored Blocks (EB) or at least … |
| 1.3.6.1.4.1.2928.6.2.17.1.2.3.1.6 | ColumnpmAif15mSESs | read-only | current | Number of Severe Errored Seconds (SES) for this 15 minute period. SES is defined as one second of available time containing more than 30% Errored Blocks (EB) o… |
| 1.3.6.1.4.1.2928.6.2.17.1.2.3.1.7 | ColumnpmAif15mBBEs | read-only | current | Number of Background Block Error (BBE) for this 15 minute period. BBE is defined as the number of Errored Blocks (EB) during one second of available time not p… |
| 1.3.6.1.4.1.2928.6.2.17.1.2.3.1.8 | ColumnpmAif15mUASs | read-only | current | Number of Unavailable Second (UAS) for this 15 minute period. UAS is defined as one second of UAT (Unavailable Time). During UAT calculations of BBE, ES and SE… |
| 1.3.6.1.4.1.2928.6.2.17.1.2.4 | TablepmAif24hTable | not-accessible | current | Table of 24 hour PM log history |
| 1.3.6.1.4.1.2928.6.2.17.1.2.4.1 | RowpmAif24hEntry | not-accessible | current | One entry for each 24 hour PM interval |
| 1.3.6.1.4.1.2928.6.2.17.1.2.4.1.1 | ColumnpmAif24hIndex | not-accessible | current | The index that identifies the interval for which the set of statistics is available. Index of '0' indicates the most recently completed interval, and the index… |
| 1.3.6.1.4.1.2928.6.2.17.1.2.4.1.2 | ColumnpmAif24hTime | read-only | current | Time stamp for this 24 hour interval |
| 1.3.6.1.4.1.2928.6.2.17.1.2.4.1.3 | ColumnpmAif24hSuspect | read-only | current | Suspect flag for this 24 hour interval |
| 1.3.6.1.4.1.2928.6.2.17.1.2.4.1.4 | ColumnpmAif24hZS | read-only | current | Zero Suppression Counter. If the performance monitoring uses zero suppression, this counter specifies how many fault free intervals have preceded the faulty on… |
| 1.3.6.1.4.1.2928.6.2.17.1.2.4.1.5 | ColumnpmAif24hESs | read-only | current | Number of Errored Seconds (ES) for this 24 hour period. ES is defined as one second of available time containing one or more Errored Blocks (EB) or at least on… |
| 1.3.6.1.4.1.2928.6.2.17.1.2.4.1.6 | ColumnpmAif24hSESs | read-only | current | Number of Severe Errored Seconds (SES) for this 24 hour period. SES is defined as one second of available time containing more than 30% Errored Blocks (EB) or … |
| 1.3.6.1.4.1.2928.6.2.17.1.2.4.1.7 | ColumnpmAif24hBBEs | read-only | current | Number of Background Block Error (BBE) for this 24 hour period. BBE is defined as the number of Errored Blocks (EB) during one second of available time not par… |
| 1.3.6.1.4.1.2928.6.2.17.1.2.4.1.8 | ColumnpmAif24hUASs | read-only | current | Number of Unavailable Second (UAS) for this 24 hour period. UAS is defined as one second of UAT (Unavailable Time). During UAT calculations of BBE, ES and SES … |
| 1.3.6.1.4.1.2928.6.2.17.1.2.5 | TablepmAif24hCurrentTable | not-accessible | current | Table of PM data for the current 24 hour period |
| 1.3.6.1.4.1.2928.6.2.17.1.2.5.1 | RowpmAif24hCurrentEntry | not-accessible | current | One entry for each monitored object |
| 1.3.6.1.4.1.2928.6.2.17.1.2.5.1.2 | ColumnpmAif24hCurrentTime | read-only | current | Elapsed time in seconds for the current 24 hour period. |
| 1.3.6.1.4.1.2928.6.2.17.1.2.5.1.3 | ColumnpmAif24hCurrentSuspect | read-only | current | Is Suspect flag, if set to `true(1)' the current 24 hour measurement period has unreliable measurement data. |
| 1.3.6.1.4.1.2928.6.2.17.1.2.5.1.4 | ColumnpmAif24hCurrentZS | read-only | current | Zero Suppression Counter. If the performance monitoring uses zero suppression, this counter specifies how many fault free intervals have preceded the faulty on… |
| 1.3.6.1.4.1.2928.6.2.17.1.2.5.1.5 | ColumnpmAif24hCurrentESs | read-only | current | Number of Errored Seconds (ES) for the current 24 hour period. ES is defined as one second of available time containing one or more Errored Blocks (EB) or at l… |
| 1.3.6.1.4.1.2928.6.2.17.1.2.5.1.6 | ColumnpmAif24hCurrentSESs | read-only | current | Number of Severe Errored Seconds (SES) for the current 24 hour period. SES is defined as one second of available time containing more than 30% Errored Blocks (… |
| 1.3.6.1.4.1.2928.6.2.17.1.2.5.1.7 | ColumnpmAif24hCurrentBBEs | read-only | current | Number of Background Block Error (BBE) for the current 24 hour period. BBE is defined as the number of Errored Blocks (EB) during one second of available time … |
| 1.3.6.1.4.1.2928.6.2.17.1.2.5.1.8 | ColumnpmAif24hCurrentUASs | read-only | current | Number of Unavailable Second (UAS) for the current 24 hour period. UAS is defined as one second of UAT (Unavailable Time). During UAT calculations of BBE, ES a… |
| 1.3.6.1.4.1.2928.6.2.17.1.3 | NodepmDchGroup | |||
| 1.3.6.1.4.1.2928.6.2.17.1.3.1 | TablepmDchTable | not-accessible | current | Table of Performance Monitored DTM channel |
| 1.3.6.1.4.1.2928.6.2.17.1.3.1.1 | RowpmDchEntry | not-accessible | current | One entry for each DTM channel |
| 1.3.6.1.4.1.2928.6.2.17.1.3.1.1.1 | ColumnpmDchIndex | not-accessible | current | The index uniquely identifying this DTM channel. |
| 1.3.6.1.4.1.2928.6.2.17.1.3.1.1.2 | ColumnpmDchAdminStatus | read-write | current | The desired state of the PM function. Affects the operative state of the PM object |
| 1.3.6.1.4.1.2928.6.2.17.1.3.1.1.3 | ColumnpmDchOperStatus | read-only | current | PM operative state. |
| 1.3.6.1.4.1.2928.6.2.17.1.3.1.1.4 | ColumnpmDchFailure | read-only | current | Shows current failure state. An empty string indicates no failure |
| 1.3.6.1.4.1.2928.6.2.17.1.3.1.1.5 | ColumnpmDchDataSource | read-only | current | The PM Data Source object |
| 1.3.6.1.4.1.2928.6.2.17.1.3.1.1.6 | ColumnpmDchDataSourceName | read-only | current | The name of the PM Data Source |
| 1.3.6.1.4.1.2928.6.2.17.1.3.1.1.7 | ColumnpmDchUatAlarmsEnabled | read-write | current | If set to `true(1)' then UAT alarms will be sent. Unavailable time (UAT) defines a state where a service is unable to perform its normal task due to severe err… |
| 1.3.6.1.4.1.2928.6.2.17.1.3.1.1.8 | ColumnpmDchTresholdAlarmsEnabled | read-write | current | If set to `true(1)' then threshold alarms will be sent. Each 15m and 24h current register counter can be assigned a threshold value. When crossed, a threshold … |
| 1.3.6.1.4.1.2928.6.2.17.1.3.1.1.9 | ColumnpmDchPeriodicEventsEnabled | read-write | current | If set to `true(1)' then History Periodic Events will be sent. |
| 1.3.6.1.4.1.2928.6.2.17.1.3.1.1.10 | ColumnpmDchZeroSuppressionEnabled | read-write | current | If set to `true(1)' then Zero Suppression mode is enabled Zero Suppression mode tells whether intervals with all current counters equal to zero shall be stored… |
| 1.3.6.1.4.1.2928.6.2.17.1.3.1.1.11 | ColumnpmDchHistorySize | read-write | current | The size of the history log |
| 1.3.6.1.4.1.2928.6.2.17.1.3.1.1.12 | ColumnpmDch15mTresholdES | read-write | current | 15 minute threshold value for ES. Current ES value equal to or above this threshold will raise a threshold alarm if enabled. A value of zero will disable thres… |
| 1.3.6.1.4.1.2928.6.2.17.1.3.1.1.13 | ColumnpmDch15mTresholdSES | read-write | current | 15 minute threshold value for SES. Current SES value equal to or above this threshold will raise a threshold alarm if enabled. A value of zero will disable thr… |
| 1.3.6.1.4.1.2928.6.2.17.1.3.1.1.14 | ColumnpmDch15mTresholdBBE | read-write | current | 15 minute threshold value for BBE. Current BBE value equal to or above this threshold will raise a threshold alarm if enabled. A value of zero will disable thr… |
| 1.3.6.1.4.1.2928.6.2.17.1.3.1.1.15 | ColumnpmDch24hTresholdES | read-write | current | 24 hour threshold value for ES. Current ES value equal to or above this threshold will raise a threshold alarm if enabled. A value of zero will disable thresho… |
| 1.3.6.1.4.1.2928.6.2.17.1.3.1.1.16 | ColumnpmDch24hTresholdSES | read-write | current | 24 hour threshold value for SES. Current SES value equal to or above this threshold will raise a threshold alarm if enabled. A value of zero will disable thres… |
| 1.3.6.1.4.1.2928.6.2.17.1.3.1.1.17 | ColumnpmDch24hTresholdBBE | read-write | current | 24 hour threshold value for BBE. Current BBE value equal to or above this threshold will raise a threshold alarm if enabled. A value of zero will disable thres… |
| 1.3.6.1.4.1.2928.6.2.17.1.3.2 | TablepmDchCurrentTable | not-accessible | current | Table of PM data for the current 15 minute period |
| 1.3.6.1.4.1.2928.6.2.17.1.3.2.1 | RowpmDchCurrentEntry | not-accessible | current | One entry for each monitored object |
| 1.3.6.1.4.1.2928.6.2.17.1.3.2.1.2 | ColumnpmDchCurrentTime | read-only | current | Elapsed time in seconds for the current 15 minute period. |
| 1.3.6.1.4.1.2928.6.2.17.1.3.2.1.3 | ColumnpmDchCurrentSuspect | read-only | current | Is Suspect flag, if set to `true(1)' the current 15 minute measurement period has unreliable measurement data. |
| 1.3.6.1.4.1.2928.6.2.17.1.3.2.1.4 | ColumnpmDchCurrentZS | read-only | current | Zero Suppression Counter. If the performance monitoring uses zero suppression, this counter specifies how many fault free intervals have preceded the faulty on… |
| 1.3.6.1.4.1.2928.6.2.17.1.3.2.1.5 | ColumnpmDchCurrentESs | read-only | current | Number of Errored Seconds (ES) for the current 15 minute period. ES is defined as one second of available time containing one or more Errored Blocks (EB) or at… |
| 1.3.6.1.4.1.2928.6.2.17.1.3.2.1.6 | ColumnpmDchCurrentSESs | read-only | current | Number of Severe Errored Seconds (SES) for the current 15 minute period. SES is defined as one second of available time containing more than 30% Errored Blocks… |
| 1.3.6.1.4.1.2928.6.2.17.1.3.2.1.7 | ColumnpmDchCurrentBBEs | read-only | current | Number of Background Block Error (BBE) for the current 15 minute period. BBE is defined as the number of Errored Blocks (EB) during one second of available tim… |
| 1.3.6.1.4.1.2928.6.2.17.1.3.2.1.8 | ColumnpmDchCurrentUASs | read-only | current | Number of Unavailable Second (UAS) for the current 15 minute period. UAS is defined as one second of UAT (Unavailable Time). During UAT calculations of BBE, ES… |
| 1.3.6.1.4.1.2928.6.2.17.1.3.3 | TablepmDch15mTable | not-accessible | current | Table of 15 minute PM interval history |
| 1.3.6.1.4.1.2928.6.2.17.1.3.3.1 | RowpmDch15mEntry | not-accessible | current | One entry for each 15 minute PM interval |
| 1.3.6.1.4.1.2928.6.2.17.1.3.3.1.1 | ColumnpmDch15mIndex | not-accessible | current | The index that identifies the interval for which the set of statistics is available. Index of '0' indicates the most recently completed interval, and the index… |
| 1.3.6.1.4.1.2928.6.2.17.1.3.3.1.2 | ColumnpmDch15mTime | read-only | current | Time stamp for this 15 minute interval |
| 1.3.6.1.4.1.2928.6.2.17.1.3.3.1.3 | ColumnpmDch15mSuspect | read-only | current | Suspect flag for this 15 minute interval |
| 1.3.6.1.4.1.2928.6.2.17.1.3.3.1.4 | ColumnpmDch15mZS | read-only | current | Zero Suppression Counter. If the performance monitoring uses zero suppression, this counter specifies how many fault free intervals have preceded the faulty on… |
| 1.3.6.1.4.1.2928.6.2.17.1.3.3.1.5 | ColumnpmDch15mESs | read-only | current | Number of Errored Seconds (ES) for this 15 minute period. ES is defined as one second of available time containing one or more Errored Blocks (EB) or at least … |
| 1.3.6.1.4.1.2928.6.2.17.1.3.3.1.6 | ColumnpmDch15mSESs | read-only | current | Number of Severe Errored Seconds (SES) for this 15 minute period. SES is defined as one second of available time containing more than 30% Errored Blocks (EB) o… |
| 1.3.6.1.4.1.2928.6.2.17.1.3.3.1.7 | ColumnpmDch15mBBEs | read-only | current | Number of Background Block Error (BBE) for this 15 minute period. BBE is defined as the number of Errored Blocks (EB) during one second of available time not p… |
| 1.3.6.1.4.1.2928.6.2.17.1.3.3.1.8 | ColumnpmDch15mUASs | read-only | current | Number of Unavailable Second (UAS) for this 15 minute period. UAS is defined as one second of UAT (Unavailable Time). During UAT calculations of BBE, ES and SE… |
| 1.3.6.1.4.1.2928.6.2.17.1.3.4 | TablepmDch24hTable | not-accessible | current | Table of 24 hour PM interval history |
| 1.3.6.1.4.1.2928.6.2.17.1.3.4.1 | RowpmDch24hEntry | not-accessible | current | One entry for each 24 hour PM interval |
| 1.3.6.1.4.1.2928.6.2.17.1.3.4.1.1 | ColumnpmDch24hIndex | not-accessible | current | The index that identifies the interval for which the set of statistics is available. Index of '0' indicates the most recently completed interval, and the index… |
| 1.3.6.1.4.1.2928.6.2.17.1.3.4.1.2 | ColumnpmDch24hTime | read-only | current | Time stamp for this 24 hour interval |
| 1.3.6.1.4.1.2928.6.2.17.1.3.4.1.3 | ColumnpmDch24hSuspect | read-only | current | Suspect flag for this 24 hour interval |
| 1.3.6.1.4.1.2928.6.2.17.1.3.4.1.4 | ColumnpmDch24hZS | read-only | current | Zero Suppression Counter. If the performance monitoring uses zero suppression, this counter specifies how many fault free intervals have preceded the faulty on… |
| 1.3.6.1.4.1.2928.6.2.17.1.3.4.1.5 | ColumnpmDch24hESs | read-only | current | Number of Errored Seconds (ES) for this 24 hour period. ES is defined as one second of available time containing one or more Errored Blocks (EB) or at least on… |
| 1.3.6.1.4.1.2928.6.2.17.1.3.4.1.6 | ColumnpmDch24hSESs | read-only | current | Number of Severe Errored Seconds (SES) for this 24 hour period. SES is defined as one second of available time containing more than 30% Errored Blocks (EB) or … |
| 1.3.6.1.4.1.2928.6.2.17.1.3.4.1.7 | ColumnpmDch24hBBEs | read-only | current | Number of Background Block Error (BBE) for this 24 hour period. BBE is defined as the number of Errored Blocks (EB) during one second of available time not par… |
| 1.3.6.1.4.1.2928.6.2.17.1.3.4.1.8 | ColumnpmDch24hUASs | read-only | current | Number of Unavailable Second (UAS) for this 24 hour period. UAS is defined as one second of UAT (Unavailable Time). During UAT calculations of BBE, ES and SES … |
| 1.3.6.1.4.1.2928.6.2.17.1.3.5 | TablepmDch24hCurrentTable | not-accessible | current | Table of PM data for the current 24 hour period |
| 1.3.6.1.4.1.2928.6.2.17.1.3.5.1 | RowpmDch24hCurrentEntry | not-accessible | current | One entry for each monitored object |
| 1.3.6.1.4.1.2928.6.2.17.1.3.5.1.2 | ColumnpmDch24hCurrentTime | read-only | current | Elapsed time in seconds for the current 24 hour period. |
| 1.3.6.1.4.1.2928.6.2.17.1.3.5.1.3 | ColumnpmDch24hCurrentSuspect | read-only | current | Is Suspect flag, if set to `true(1)' the current 24 hour measurement period has unreliable measurement data. |
| 1.3.6.1.4.1.2928.6.2.17.1.3.5.1.4 | ColumnpmDch24hCurrentZS | read-only | current | Zero Suppression Counter. If the performance monitoring uses zero suppression, this counter specifies how many fault free intervals have preceded the faulty on… |
| 1.3.6.1.4.1.2928.6.2.17.1.3.5.1.5 | ColumnpmDch24hCurrentESs | read-only | current | Number of Errored Seconds (ES) for the current 24 hour period. ES is defined as one second of available time containing one or more Errored Blocks (EB) or at l… |
| 1.3.6.1.4.1.2928.6.2.17.1.3.5.1.6 | ColumnpmDch24hCurrentSESs | read-only | current | Number of Severe Errored Seconds (SES) for the current 24 hour period. SES is defined as one second of available time containing more than 30% Errored Blocks (… |
| 1.3.6.1.4.1.2928.6.2.17.1.3.5.1.7 | ColumnpmDch24hCurrentBBEs | read-only | current | Number of Background Block Error (BBE) for the current 24 hour period. BBE is defined as the number of Errored Blocks (EB) during one second of available time … |
| 1.3.6.1.4.1.2928.6.2.17.1.3.5.1.8 | ColumnpmDch24hCurrentUASs | read-only | current | Number of Unavailable Second (UAS) for the current 24 hour period. UAS is defined as one second of UAT (Unavailable Time). During UAT calculations of BBE, ES a… |
| 1.3.6.1.4.1.2928.6.2.17.1.4 | NodepmConformanceGroups | |||
| 1.3.6.1.4.1.2928.6.2.17.1.4.1 | GrouppmTifConformanceGroup | current | The PM Trunk Interface Conformance Group. | |
| 1.3.6.1.4.1.2928.6.2.17.1.4.2 | GrouppmAifConformanceGroup | current | The PM Access Interface Conformance Group. | |
| 1.3.6.1.4.1.2928.6.2.17.1.4.3 | GrouppmDchConformanceGroup | current | The PM Channel Conformance Group. |
Type Definitions
| Name | Syntax | Status | Description |
|---|---|---|---|
| Counter15m | Unsigned32 (0..910) | current | |
| Counter24h | Unsigned32 (0..86410) | current |