NORTEL-SECURE-NETWORK-ACCESS-MIB
76 objects
Nortel Networks NSNA MIB Copyright 2004 Nortel Networks, Inc. All rights reserved. This Nortel Networks SNMP Management Information Base Specification embodies Nortel Networks' confidential and proprietary intellectual property. Nortel Networks retains all title and ownership in the Specification, including any revisions. This Specification is supplied 'AS IS,' and Nortel Networks makes no warranty, either express or implied, as to the use, operation, condition, or performance of the Specification.
Imported Objects
| IF-MIB | InterfaceIndex |
| INET-ADDRESS-MIB | InetAddress InetAddressPrefixLength InetAddressType InetPortNumber |
| Q-BRIDGE-MIB | VlanId VlanIdOrNone |
| RAPID-CITY | IdList |
| SNMP-FRAMEWORK-MIB | SnmpAdminString |
| SNMPv2-SMI | Integer32 MODULE-IDENTITY NOTIFICATION-TYPE OBJECT-TYPE |
| SNMPv2-TC | MacAddress RowStatus TEXTUAL-CONVENTION TruthValue |
| SYNOPTICS-ROOT-MIB | bayStackMibs |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.45.5.10 | IdentitynortelSecureNetworkAccessMib | for | Nortel Networks NSNA MIB Copyright 2004 Nortel Networks, Inc. All rights reserved. This Nortel Networks SNMP Management Information Base Specification embodies… | |
| 1.3.6.1.4.1.45.5.10.0 | NodensnaNotifications | |||
| 1.3.6.1.4.1.45.5.10.0.1 | NotificationnsnaClosedConnectionToSnas | current | This notification is generated whenever the device closes the connection to the NSNAS. The reason why the connection is closed is indicated in nsnaClosedConnec… | |
| 1.3.6.1.4.1.45.5.10.0.2 | NotificationnsnaStatusQuoIntervalExpired | current | This notification is generated whenever the status-quo interval expires after the connection to the NSNAS has closed. Note that if the configured status-quo in… | |
| 1.3.6.1.4.1.45.5.10.0.3 | NotificationnsnaInvalidMessageFromSnas | current | This notification is generated whenever the device receives an invalid message from the NSNAS. This generally means that the received message is corrupted. As … | |
| 1.3.6.1.4.1.45.5.10.0.4 | NotificationnsnaSnasConnected | current | This notification is generated whenever an NSNAS successfully connects to the switch. | |
| 1.3.6.1.4.1.45.5.10.1 | NodensnaObjects | |||
| 1.3.6.1.4.1.45.5.10.1.1 | NodensnaScalars | |||
| 1.3.6.1.4.1.45.5.10.1.1.1 | ScalarnsnaEnabled | read-write | current | Indicates whether NSNA is globally enabled for the system. |
| 1.3.6.1.4.1.45.5.10.1.1.3 | ScalarnsnaNsnasConnectionState | read-only | current | Indicates whether the switch currently has a connection to an NSNAS, whether the switch is currently in the process of establishing a connection to an NSNAS, o… |
| 1.3.6.1.4.1.45.5.10.1.1.4 | ScalarnsnaNsnasInetAddressType | read-only | current | If a NSNAS is currently connected to the switch, this indicates the type of the internet address from which the NSNAS connected. The contents of nsnaSnasInetAd… |
| 1.3.6.1.4.1.45.5.10.1.1.5 | ScalarnsnaNsnasInetAddress | read-only | current | If a NSNAS is currently connected to the switch, this indicates the internet address from which the NSNAS connected. If there is not currently a NSNAS connecte… |
| 1.3.6.1.4.1.45.5.10.1.1.6 | ScalarnsnaNsnasSendHelloInterval | read-only | current | The interval for sending SSCP Hello messages for the current SSCP connection. If this period of time passes without any SSCP messages being sent, a Hello messa… |
| 1.3.6.1.4.1.45.5.10.1.1.7 | ScalarnsnaNsnasInactivityInterval | read-only | current | The inactivity interval for the current SSCP connection. If this period of time passes without any SSCP messages being received, the SSCP connection will be cl… |
| 1.3.6.1.4.1.45.5.10.1.1.8 | ScalarnsnaNsnasStatusQuoInterval | read-only | current | The status-quo interval for the current or last SSCP connection. If the NSNAS is disconnected from the switch for any reason, the switch will wait this period … |
| 1.3.6.1.4.1.45.5.10.1.1.9 | ScalarnsnaMacAuthenticationEnabled | read-only | current | This object indicates whether MAC Authentication is currently enabled on the switch. |
| 1.3.6.1.4.1.45.5.10.1.1.10 | ScalarnsnaFailOpenEnabled | read-write | current | This object indicates whether the Fail-Open feature is currently enabled on the switch. |
| 1.3.6.1.4.1.45.5.10.1.1.11 | ScalarnsnaFailOpenVlan | read-write | current | This object indicates the current Fail-Open Vlan ID. A value of 0 indicates the value either has not been set, or that the previous value is no longer valid. |
| 1.3.6.1.4.1.45.5.10.1.1.12 | ScalarnsnaFailOpenFilterVlan | read-write | current | This object indicates the current Vlan ID whose associated filters are to be used as the Fail-Open filters. A value of 0 indicates the value either has not bee… |
| 1.3.6.1.4.1.45.5.10.1.1.14 | ScalarnsnaNsnasConnectionVersion | read-only | current | This object indicates the SSCP version being used in the current NSNAS connection. If there is no current connection, the value will be 0. |
| 1.3.6.1.4.1.45.5.10.1.1.15 | ScalarnsnaNsnasRadiusServerEnabled | read-only | current | This object indicates whether the NSNAS currently connected to the switch is acting as a RADIUS server. |
| 1.3.6.1.4.1.45.5.10.1.1.16 | ScalarnsnaNsnasRadiusServerPort | read-only | current | If there is an NSNAS currently connected to the switch that is acting as a RADIUS server, this object returns the port on which that server listens for RADIUS … |
| 1.3.6.1.4.1.45.5.10.1.2 | TablensnaNsnasTable | not-accessible | current | The table of subnets from which NSNASs will connect. |
| 1.3.6.1.4.1.45.5.10.1.2.1 | RownsnaNsnasEntry | not-accessible | current | A set of objects that specify a subnet from which NSNASs will connect, along with related configuration parameters. |
| 1.3.6.1.4.1.45.5.10.1.2.1.1 | ColumnnsnaNsnasAddressType | not-accessible | current | The type of internet address contained in nsnaNsnasAddress. |
| 1.3.6.1.4.1.45.5.10.1.2.1.2 | ColumnnsnaNsnasAddress | not-accessible | current | The internet address portion of the NSNAS subnet. This combined with the value of nsnaNsnasAddressMask specifies the subnet of the NSNAS. |
| 1.3.6.1.4.1.45.5.10.1.2.1.3 | ColumnnsnaNsnasAddressMask | not-accessible | current | The address mask portion of the NSNAS subnet. This combined with the value of nsnaNsnasAddress specifies the subnet of the NSNAS. |
| 1.3.6.1.4.1.45.5.10.1.2.1.4 | ColumnnsnaNsnasPort | read-create | current | The port on which NSNASs connecting from this subnet will connect. |
| 1.3.6.1.4.1.45.5.10.1.2.1.5 | ColumnnsnaNsnasRowStatus | read-create | current | This object is used for row create/deletion. |
| 1.3.6.1.4.1.45.5.10.1.3 | TablensnaPortTable | not-accessible | current | The table of per-port NSNA configuration parameters. There must be an entry in this table for each NSNA-capable port. |
| 1.3.6.1.4.1.45.5.10.1.3.1 | RownsnaPortEntry | not-accessible | current | NSNA configuration parameters for a port. |
| 1.3.6.1.4.1.45.5.10.1.3.1.1 | ColumnnsnaPortIfIndex | not-accessible | current | The ifIndex corresponding to the port. |
| 1.3.6.1.4.1.45.5.10.1.3.1.2 | ColumnnsnaPortMode | read-write | current | The NSNA mode of the port. |
| 1.3.6.1.4.1.45.5.10.1.3.1.3 | ColumnnsnaPortGreenVlanId | read-write | current | The green VLAN ID of the port. This value is only used when the corresponding value of nsnaPortMode is static(2). Otherwise, the value will be 0. |
| 1.3.6.1.4.1.45.5.10.1.3.1.4 | ColumnnsnaPortVoipVlans | read-write | current | The set of VOIP VLANs to which this port belongs. This value is only used when the corresponding value of nsnaPortMode is static(2), dynamic(3), or secure(5). |
| 1.3.6.1.4.1.45.5.10.1.3.1.5 | ColumnnsnaPortUplinkVlans | read-write | current | The set of uplink VLANs to which this port belongs. This value is only used when the corresponding value of nsnaPortMode is uplink(4). |
| 1.3.6.1.4.1.45.5.10.1.3.1.6 | ColumnnsnaPortState | read-only | current | The current NSNA color of the port. |
| 1.3.6.1.4.1.45.5.10.1.3.1.7 | ColumnnsnaPortDhcpState | read-only | current | The DHCP state of the port. |
| 1.3.6.1.4.1.45.5.10.1.3.1.8 | ColumnnsnaPortHubModeEnabled | read-write | current | Indicates whether Hub Mode is enabled on a port. |
| 1.3.6.1.4.1.45.5.10.1.3.1.9 | ColumnnsnaPortHubModeMaxClients | read-write | current | The maximum number of clients allowed on a port when Hub Mode is enabled. The value is ignored if Hub Mode is disabled. |
| 1.3.6.1.4.1.45.5.10.1.4 | TablensnaVlanTable | not-accessible | current | The table of per-Vlan NSNA configuration parameters. There must be an entry in this table for every Vlan. |
| 1.3.6.1.4.1.45.5.10.1.4.1 | RownsnaVlanEntry | not-accessible | current | NSNA configuration parameters for a Vlan. |
| 1.3.6.1.4.1.45.5.10.1.4.1.1 | ColumnnsnaVlanId | not-accessible | current | The ID of the Vlan. |
| 1.3.6.1.4.1.45.5.10.1.4.1.2 | ColumnnsnaVlanColor | read-write | current | The NSNA color of the Vlan. |
| 1.3.6.1.4.1.45.5.10.1.4.1.3 | ColumnnsnaVlanFilterSetName | read-write | current | The name of the filter set associated with the VLAN. An empty value means that no filter set is associated with the VLAN. |
| 1.3.6.1.4.1.45.5.10.1.4.1.4 | ColumnnsnaVlanFilterSetId | read-write | current | The ID of the filter set associated with the VLAN. A value of 0 means that no filter set is associated with the VLAN. |
| 1.3.6.1.4.1.45.5.10.1.4.1.5 | ColumnnsnaVlanYellowSubnetType | read-write | current | The type of internet address contained in the corresponding instance of nsnaVlanYellowSubnet. |
| 1.3.6.1.4.1.45.5.10.1.4.1.6 | ColumnnsnaVlanYellowSubnet | read-write | current | The yellow subnet address of the VLAN. This value is only used when the corresponding value of nsnaVlanColor is yellow(4). |
| 1.3.6.1.4.1.45.5.10.1.4.1.7 | ColumnnsnaVlanYellowSubnetMask | read-write | current | The number of bits in the network mask of the yellow subnet address of the VLAN. This value is only used when the corresponding value of nsnaVlanColor is yello… |
| 1.3.6.1.4.1.45.5.10.1.5 | TablensnaClientTable | not-accessible | current | The table of per-client NSNA state information. There must be an entry in this table for every NSNA client. |
| 1.3.6.1.4.1.45.5.10.1.5.1 | RownsnaClientEntry | not-accessible | current | State information for an NSNA client. |
| 1.3.6.1.4.1.45.5.10.1.5.1.1 | ColumnnsnaClientIfIndex | not-accessible | current | The ifIndex of the port on which the client is attached. |
| 1.3.6.1.4.1.45.5.10.1.5.1.2 | ColumnnsnaClientMacAddress | not-accessible | current | The MAC address of the client. |
| 1.3.6.1.4.1.45.5.10.1.5.1.3 | ColumnnsnaClientDeviceType | read-only | current | The type of device of the client. |
| 1.3.6.1.4.1.45.5.10.1.5.1.4 | ColumnnsnaClientVlanId | read-only | current | The Vlan ID of the client. |
| 1.3.6.1.4.1.45.5.10.1.5.1.5 | ColumnnsnaClientAddressType | read-only | current | The type of address contained in the corresponding instance of nsnaClientAddress. |
| 1.3.6.1.4.1.45.5.10.1.5.1.6 | ColumnnsnaClientAddress | read-only | current | The IP address of the client. |
| 1.3.6.1.4.1.45.5.10.1.5.1.7 | ColumnnsnaClientExpired | read-only | current | Indicates whether this client has been aged-out. |
| 1.3.6.1.4.1.45.5.10.1.5.1.8 | ColumnnsnaClientFilterVlanId | read-only | current | The Vlan ID whose associated filter set is installed on this port for this client. This is used when MAC Authentication is enabled. If MAC Authentication is no… |
| 1.3.6.1.4.1.45.5.10.1.5.1.9 | ColumnnsnaClientStatus | read-only | current | The status of this client. |
| 1.3.6.1.4.1.45.5.10.1.6 | TablensnaStaticClientTable | not-accessible | current | The table of static NSNA client configuration. This is used for authenticating clients on static NSNA ports. |
| 1.3.6.1.4.1.45.5.10.1.6.1 | RownsnaStaticClientEntry | not-accessible | current | Static NSNA client configuration. |
| 1.3.6.1.4.1.45.5.10.1.6.1.1 | ColumnnsnaStaticClientVlanId | not-accessible | current | The VLAN ID in which a client is allowed. |
| 1.3.6.1.4.1.45.5.10.1.6.1.2 | ColumnnsnaStaticClientMacAddress | not-accessible | current | The MAC address of an allowed client. |
| 1.3.6.1.4.1.45.5.10.1.6.1.3 | ColumnnsnaStaticClientDeviceType | read-create | current | The type of device of the allowed client. |
| 1.3.6.1.4.1.45.5.10.1.6.1.4 | ColumnnsnaStaticClientAddressType | read-create | current | The type of address contained in the corresponding instance of nsnaStaticClientAddress. |
| 1.3.6.1.4.1.45.5.10.1.6.1.5 | ColumnnsnaStaticClientAddress | read-create | current | The IP address to be used for the allowed client. |
| 1.3.6.1.4.1.45.5.10.1.6.1.6 | ColumnnsnaStaticClientRowStatus | read-create | current | Used for row creation/deletion. When creating a row, the corresponding instances of nsnaStaticClientDeviceType, nsnaStaticClientAddressType, and nsnaStaticClie… |
| 1.3.6.1.4.1.45.5.10.1.7 | TablensnaIpPhoneSignatureTable | not-accessible | current | The table of IP phone signature string configuration. This is used for recognizing IP phones. |
| 1.3.6.1.4.1.45.5.10.1.7.1 | RownsnaIpPhoneSignatureEntry | not-accessible | current | IP phone signature string configuration. |
| 1.3.6.1.4.1.45.5.10.1.7.1.1 | ColumnnsnaIpPhoneSignatureString | not-accessible | current | The signature string of an IP phone. |
| 1.3.6.1.4.1.45.5.10.1.7.1.2 | ColumnnsnaIpPhoneSignatureRowStatus | read-create | current | Used for row creation/deletion. |
| 1.3.6.1.4.1.45.5.10.1.8 | NodensnaNotificationObjects | |||
| 1.3.6.1.4.1.45.5.10.1.8.1 | ScalarnsnaClosedConnectionReason | accessible-for-notify | current | Indicates the reason why the connection to the NSNAS was closed. |
| 1.3.6.1.4.1.45.5.10.1.8.2 | ScalarnsnaInvalidMessageHeader | accessible-for-notify | current | The header of an invalid message from the NSNAS. Note that if an entire header is not available, only the portion that is available will be provided in this ob… |
Type Definitions
| Name | Syntax | Status | Description |
|---|---|---|---|
| NsnaVlanIdOrNone | Integer32 (0 | 1..4094) | current | The VLAN ID that uniquely identifies a specific VLAN, or no VLAN. The special value of zero is used to indicate that no VLAN ID is present or used. This can be used in any situation where an object or a table entry must… |