RAPID-CITY
11658 objects
Enterprise MIB for the Accelar product family.
Imported Objects
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1 | Nodeinternet | |||
| 1.3.6.1.4.1.2272 | IdentityrapidCity | Enterprise MIB for the Accelar product family. | ||
| 1.3.6.1.4.1.2272.1 | NodercMgmt | |||
| 1.3.6.1.4.1.2272.1.1 | NodercSystem | |||
| 1.3.6.1.4.1.2272.1.1.1 | ScalarrcSysIpAddr | read-only | current | This entity's IP address. |
| 1.3.6.1.4.1.2272.1.1.2 | ScalarrcSysNetMask | read-only | current | This entity's subnet mask. |
| 1.3.6.1.4.1.2272.1.1.3 | ScalarrcSysBroadcast | read-only | current | This entity's broadcast address. |
| 1.3.6.1.4.1.2272.1.1.4 | ScalarrcSysCommReadWriteAll | read-write | current | When an SNMP message is received by this entity, the community string in the message is compared with this string first. If it matches, read-write access is gr… |
| 1.3.6.1.4.1.2272.1.1.5 | ScalarrcSysCommReadWrite | read-write | current | When an SNMP message is received by this entity, the community string in the message is compared with this string second. If it matches, read-write access is g… |
| 1.3.6.1.4.1.2272.1.1.6 | ScalarrcSysCommReadOnly | read-write | current | When an SNMP message is received by this entity, the community string in the message is compared with this string third. If it matches, read-only access is gra… |
| 1.3.6.1.4.1.2272.1.1.7 | ScalarrcSysVersion | read-only | current | Software version running on device |
| 1.3.6.1.4.1.2272.1.1.8 | ScalarrcSysAction | read-write | deprecated | Initiate a system action. |
| 1.3.6.1.4.1.2272.1.1.9 | ScalarrcSysResult | read-only | current | Result from the last system action. |
| 1.3.6.1.4.1.2272.1.1.10 | ScalarrcSysLastChange | read-only | current | Last management initiated configuration change since sysUpTime. |
| 1.3.6.1.4.1.2272.1.1.11 | ScalarrcSysLastVlanChange | read-only | current | Last management initiated VLAN configuration change since sysUpTime. |
| 1.3.6.1.4.1.2272.1.1.12 | ScalarrcSysLastStatisticsReset | read-only | current | Last management initiated statistics reset since sysUpTime. |
| 1.3.6.1.4.1.2272.1.1.13 | ScalarrcSysBufferUtil | read-only | current | Buffer utilization as a percentage of the total amount of buffer space in the system. A high value indicates congestion. |
| 1.3.6.1.4.1.2272.1.1.14 | ScalarrcSysBufferUtilPeak | read-only | current | The largest buffer utilization since sysUpTime |
| 1.3.6.1.4.1.2272.1.1.15 | ScalarrcSysBufferUtilPeakTime | read-only | current | Timestamp for rcSysPeakBandwidth |
| 1.3.6.1.4.1.2272.1.1.16 | ScalarrcSysNVRamSize | read-only | current | Total Non-volatile RAM in Kbytes |
| 1.3.6.1.4.1.2272.1.1.17 | ScalarrcSysNVRamUsed | read-only | current | Non-volatile RAM in use in Kbytes |
| 1.3.6.1.4.1.2272.1.1.18 | ScalarrcSysLastSaveToNVRam | read-only | current | SysUpTime of the last time when NVRAM was written to. This could be a save of the system configuration or via a file transfer of a configuration file. |
| 1.3.6.1.4.1.2272.1.1.19 | ScalarrcSysLastSaveToStandbyNVRam | read-only | current | SysUpTime of the last time when the standby NVRAM (on the back-up CPU board) was written to. |
| 1.3.6.1.4.1.2272.1.1.20 | ScalarrcSysCpuUtil | read-only | current | Percentage of CPU utilization. This object is not supported on VSP. VSP uses rcKhiSlotCpuCurrentUtil |
| 1.3.6.1.4.1.2272.1.1.21 | ScalarrcSysSwitchFabricUtil | read-only | current | Percentage of Switching Fabric utilization. Object is not support on VSP |
| 1.3.6.1.4.1.2272.1.1.22 | ScalarrcSysRmonMemSize | read-write | current | Amount of RAM in bytes to allocate for RMON to use when rcSysRmonEnable is TRUE. |
| 1.3.6.1.4.1.2272.1.1.23 | ScalarrcSysRmonEnable | read-write | current | Control whether the RMON feature should be enabled. To enable the RMON feature, set this variable to true. The RMON agent in the device will get started immedi… |
| 1.3.6.1.4.1.2272.1.1.24 | ScalarrcSysRmonSaveConfig | read-write | deprecated | Control whether RMON configuration information should be saved to NVRAM so RMON settings can be automatically reinstalled after a system reboot. Setting rcSysR… |
| 1.3.6.1.4.1.2272.1.1.25 | ScalarrcSysRmonTrapOption | read-write | current | Used to indicate whether RMON traps should be sent to only the owner of the RMON alarm (i.e., the manager that created the alarm entry) or all trap recipients … |
| 1.3.6.1.4.1.2272.1.1.26 | ScalarrcSysSupportRouting | read-only | current | Used to indicate whether routing is supported in this product. |
| 1.3.6.1.4.1.2272.1.1.27 | ScalarrcSysSupportWebServer | read-only | current | Used to indicate whether WebServer is supported in this product. |
| 1.3.6.1.4.1.2272.1.1.28 | ScalarrcSysLastIpAddrChange | read-only | current | Last management initiated IP address change since sysUpTime. Any addition or deletion of an IP address to a single routable port or a VLAN is time-stamped by t… |
| 1.3.6.1.4.1.2272.1.1.29 | ScalarrcSysCommReadWriteLayer3 | read-write | current | When an SNMP message is received by this entity, the community string in the message is compared with this string third. If it matches, read-write access is gr… |
| 1.3.6.1.4.1.2272.1.1.30 | ScalarrcSysCommReadWriteLayer2 | read-write | current | When an SNMP message is received by this entity, the community string in the message is compared with this string fourth. If it matches, read-write access is g… |
| 1.3.6.1.4.1.2272.1.1.31 | ScalarrcSysAccessPolicyEnable | read-write | current | Used to configure the system access policy feature. if 'true', the rcSysAccessPolicyTable is examined to determine which packets should be allowed or denied ac… |
| 1.3.6.1.4.1.2272.1.1.32 | ScalarrcSysDefaultRuntimeConfigFileName | read-only | current | default config. |
| 1.3.6.1.4.1.2272.1.1.33 | ScalarrcSysDefaultBootConfigFileName | read-only | current | default boot config. |
| 1.3.6.1.4.1.2272.1.1.34 | ScalarrcSysConfigFileName | read-write | current | File name used in conjunction with rcSysAction. If rcSysAction is set to 'saveRuntimeConfig' or 'saveRuntimeConfigToSlave' then this file name will be used ins… |
| 1.3.6.1.4.1.2272.1.1.35 | ScalarrcSysLastRunTimeConfigSave | read-only | current | SysUpTime of the last time when the run time configuration was written to. |
| 1.3.6.1.4.1.2272.1.1.36 | ScalarrcSysLastRunTimeConfigSaveToSlave | read-only | current | SysUpTime of the last time when the run time configuration was written to slave NVRAM. |
| 1.3.6.1.4.1.2272.1.1.37 | ScalarrcSysLastBootConfigSave | read-only | current | SysUpTime of the last time when the boot configuration was written to. |
| 1.3.6.1.4.1.2272.1.1.38 | ScalarrcSysLastBootConfigSaveOnSlave | read-only | current | SysUpTime of the last time when the boot configuration was written on the slave NVRAM. |
| 1.3.6.1.4.1.2272.1.1.39 | ScalarrcSysRmonUtilizationMethod | read-write | current | Used to control whether RMON should use a half-duplex or full-duplex formula to calculate port utilization. When set to 'halfDuplex', RMON will use InOctets an… |
| 1.3.6.1.4.1.2272.1.1.40 | ScalarrcSysCommReadWriteLayer1 | read-write | current | read-write L1 access |
| 1.3.6.1.4.1.2272.1.1.41 | ScalarrcSysOtherBufferUtil | read-only | current | bw currently consumed |
| 1.3.6.1.4.1.2272.1.1.42 | ScalarrcSysOtherBufferUtilPeak | read-only | current | peak bw since reset |
| 1.3.6.1.4.1.2272.1.1.43 | ScalarrcSysOtherBufferUtilPeakTime | read-only | current | timestamp for rcSysPeakBw |
| 1.3.6.1.4.1.2272.1.1.44 | ScalarrcSysOtherCpuUtil | read-only | current | % cpu utilization |
| 1.3.6.1.4.1.2272.1.1.45 | ScalarrcSysOtherSwitchFabricUtil | read-only | current | % switch fabric util |
| 1.3.6.1.4.1.2272.1.1.46 | ScalarrcSysDramSize | read-only | current | Dram size in mega-bytes. It is not supported on VSP |
| 1.3.6.1.4.1.2272.1.1.47 | ScalarrcSysDramUsed | read-only | current | Dram used in percentage. It is not supported on VSP |
| 1.3.6.1.4.1.2272.1.1.48 | ScalarrcSysDramFree | read-only | current | Dram free size in kilo-bytes. It is not supported on VSP |
| 1.3.6.1.4.1.2272.1.1.49 | ScalarrcSysDramMaxBlockFree | read-only | current | Dram max block free size in kilo-bytes. it is not supported on VSP |
| 1.3.6.1.4.1.2272.1.1.51 | ScalarrcSysVirtualIpAddr | read-write | current | Virtual IP is an IP address that owned and advertised only by the master CPU. So whichever CPU is master registers this IP address. Unlike the management IP ad… |
| 1.3.6.1.4.1.2272.1.1.52 | ScalarrcSysVirtualNetMask | read-write | current | Net mask of the management virtual Ip address |
| 1.3.6.1.4.1.2272.1.1.53 | ScalarrcSysReadWriteLevel | read-write | current | The status of the read/write level |
| 1.3.6.1.4.1.2272.1.1.55 | ScalarrcSysMTUSize | read-write | current | This is the maximum transmission size of frames that all the ports on the chassis support. Note: MicroVSP (VSP1xxx) supports frame size 1950,1522,9022. Other p… |
| 1.3.6.1.4.1.2272.1.1.56 | ScalarrcSysClockSyncTime | read-write | current | Time interval at which RTC and system clocks are synchronized.Not supported in VSP 3.3 |
| 1.3.6.1.4.1.2272.1.1.57 | ScalarrcSysForceTrapSender | read-write | current | This is a flag that if user wants to configured CLIP (Circuit Less IP) as trap originator. |
| 1.3.6.1.4.1.2272.1.1.58 | ScalarrcSysMrouteStrLimit | read-write | current | enable or disable mroute stream limit in system. |
| 1.3.6.1.4.1.2272.1.1.60 | TablercSysTrapRecvTable | not-accessible | deprecated | The trap receiver table (0 to 25 entries). This table lists the addresses of Network Management Stations that should receive trap messages from this entity whe… |
| 1.3.6.1.4.1.2272.1.1.60.1 | RowrcSysTrapRecvEntry | not-accessible | deprecated | A trap receiver table entry. |
| 1.3.6.1.4.1.2272.1.1.60.1.1 | ColumnrcSysTrapRecvAddress | read-only | deprecated | IP address for trap receiver. |
| 1.3.6.1.4.1.2272.1.1.60.1.2 | ColumnrcSysTrapRecvVersion | read-write | deprecated | The version of trap receiver. |
| 1.3.6.1.4.1.2272.1.1.60.1.3 | ColumnrcSysTrapRecvCommunity | read-write | deprecated | Community string used for trap messages to this trap receiver. |
| 1.3.6.1.4.1.2272.1.1.60.1.4 | ColumnrcSysTrapRecvSrcAddress | read-write | deprecated | Source IP address to use when sending traps. This IP address will be inserted into the source IP address field in the UDP trap packet. |
| 1.3.6.1.4.1.2272.1.1.60.1.5 | ColumnrcSysTrapRecvRowStatus | read-write | deprecated | Used to create/delete entries |
| 1.3.6.1.4.1.2272.1.1.61 | TablercSysAccessPolicyTable | not-accessible | current | Management access policy table. This table is used to permit or deny access to this device via the specified source Id. |
| 1.3.6.1.4.1.2272.1.1.61.1 | RowrcSysAccessPolicyEntry | not-accessible | current | An access policy table entry. |
| 1.3.6.1.4.1.2272.1.1.61.1.1 | ColumnrcSysAccessPolicyId | read-only | current | Policy Id. |
| 1.3.6.1.4.1.2272.1.1.61.1.2 | ColumnrcSysAccessPolicyName | read-write | current | Name of this policy. |
| 1.3.6.1.4.1.2272.1.1.61.1.3 | ColumnrcSysAccessPolicyPolicyEnable | read-write | current | Indicate whether this policy is currently active. |
| 1.3.6.1.4.1.2272.1.1.61.1.4 | ColumnrcSysAccessPolicyMode | read-write | current | Used to indicate whether a packet having a source IP address that matches this entry should be permitted to enter the device or denied access. |
| 1.3.6.1.4.1.2272.1.1.61.1.5 | ColumnrcSysAccessPolicyService | read-write | current | Is represented as bitset to indicate which protocol this entry should be applied to. Value is one of multiple(logical 'OR') of the following values: telnet(1):… |
| 1.3.6.1.4.1.2272.1.1.61.1.6 | ColumnrcSysAccessPolicyPrecedence | read-write | current | Used to indicate the precedence of this policy. The Lower the number the higher the precedence. |
| 1.3.6.1.4.1.2272.1.1.61.1.7 | ColumnrcSysAccessPolicyNetAddr | read-write | current | Source network IP address. |
| 1.3.6.1.4.1.2272.1.1.61.1.8 | ColumnrcSysAccessPolicyNetMask | read-write | current | Source network mask. |
| 1.3.6.1.4.1.2272.1.1.61.1.9 | ColumnrcSysAccessPolicyTrustedHostAddr | read-write | current | Trusted IP address of host performing a rlogin into the device. |
| 1.3.6.1.4.1.2272.1.1.61.1.10 | ColumnrcSysAccessPolicyTrustedHostUserName | read-write | current | User name on the trusted host performing a rlogin into the device. |
| 1.3.6.1.4.1.2272.1.1.61.1.11 | ColumnrcSysAccessPolicyAccessLevel | read-write | current | Access level of trusted host. |
| 1.3.6.1.4.1.2272.1.1.61.1.12 | ColumnrcSysAccessPolicyLog | read-write | current | Used to indicate whether logging should be performed if this policy was applied. |
| 1.3.6.1.4.1.2272.1.1.61.1.13 | ColumnrcSysAccessPolicyUsage | read-only | current | Usage Counter |
| 1.3.6.1.4.1.2272.1.1.61.1.14 | ColumnrcSysAccessPolicyRowStatus | read-write | current | Used to create/delete an entry |
| 1.3.6.1.4.1.2272.1.1.61.1.15 | ColumnrcSysAccessPolicyAccessStrict | read-write | current | Used to restrict the access level specified in the system access policy table to exactly the same access level as specified by user. If TRUE then only the acce… |
| 1.3.6.1.4.1.2272.1.1.61.1.16 | ColumnrcSysAccessPolicyNetInetAddrType | read-write | current | Source network Inet Address Type. |
| 1.3.6.1.4.1.2272.1.1.61.1.17 | ColumnrcSysAccessPolicyNetInetAddress | read-write | current | Source network Inet Address (prefix/network). |
| 1.3.6.1.4.1.2272.1.1.61.1.18 | ColumnrcSysAccessPolicyNetInetAddrPrefixLen | read-write | current | Source network Inet Address Prefix-Length/Mask. |
| 1.3.6.1.4.1.2272.1.1.61.1.19 | ColumnrcSysAccessPolicyTrustedHostInetAddress | read-write | current | Trusted Inet address of host performing a rlogin into the device. |
| 1.3.6.1.4.1.2272.1.1.62 | TablercSysTrapSenderTable | not-accessible | current | The trap sender table (0 to 25 entries). This table lists the addresses of Network Management Stations and the Source Address that should receive trap messages… |
| 1.3.6.1.4.1.2272.1.1.62.1 | RowrcSysTrapSenderEntry | not-accessible | current | A trap sender table entry. |
| 1.3.6.1.4.1.2272.1.1.62.1.1 | ColumnrcSysTrapSenderRecvAddress | read-only | current | IP address for trap receiver. |
| 1.3.6.1.4.1.2272.1.1.62.1.2 | ColumnrcSysTrapSenderSrcAddress | read-write | current | IP address for trap sender. |
| 1.3.6.1.4.1.2272.1.1.63 | ScalarrcSysDnsServerListTableSize | read-only | current | Used to indicate the number of entries in the table. |
| 1.3.6.1.4.1.2272.1.1.64 | TablercSysDnsServerListTable | not-accessible | current | DNS serever list table used to store the details of the DNS server configured. |
| 1.3.6.1.4.1.2272.1.1.64.1 | RowrcSysDnsServerListEntry | not-accessible | current | table entry. |
| 1.3.6.1.4.1.2272.1.1.64.1.1 | ColumnrcSysDnsServerListType | read-write | current | Type of the DNS server |
| 1.3.6.1.4.1.2272.1.1.64.1.2 | ColumnrcSysDnsServerListIp | read-write | deprecated | IP address of the DNS server |
| 1.3.6.1.4.1.2272.1.1.64.1.3 | ColumnrcSysDnsServerListStatus | read-only | current | Status of DNS server |
| 1.3.6.1.4.1.2272.1.1.64.1.4 | ColumnrcSysDnsServerListRequestCount | read-only | current | Number of request send to this server |
| 1.3.6.1.4.1.2272.1.1.64.1.5 | ColumnrcSysDnsServerListSuccessCount | read-only | current | Number of request send to this server which are successful |
| 1.3.6.1.4.1.2272.1.1.64.1.6 | ColumnrcSysDnsServerListRowStatus | read-write | current | Used to create/delete DNS server entries in rcSysDnsServerListTable. |
| 1.3.6.1.4.1.2272.1.1.64.1.7 | ColumnrcSysDnsServerListAddressType | read-create | current | The type of ip address configured by the DNS server |
| 1.3.6.1.4.1.2272.1.1.64.1.8 | ColumnrcSysDnsServerListAddress | read-create | current | The ip address configured by the DNS server |
| 1.3.6.1.4.1.2272.1.1.65 | TablercSysDnsHostTable | not-accessible | current | DNS Host table. |
| 1.3.6.1.4.1.2272.1.1.65.1 | RowrcSysDnsHostEntry | not-accessible | current | table entry. |
| 1.3.6.1.4.1.2272.1.1.65.1.1 | ColumnrcSysDnsHostData | read-only | current | Host Name or Host IP Address. |
| 1.3.6.1.4.1.2272.1.1.65.1.2 | ColumnrcSysDnsHostName | read-only | current | Host Name. |
| 1.3.6.1.4.1.2272.1.1.65.1.3 | ColumnrcSysDnsHostIpAddress | read-only | deprecated | Host IP Address. |
| 1.3.6.1.4.1.2272.1.1.65.1.4 | ColumnrcSysDnsHostSource | read-only | current | DNS Server IP or /etc/host file. |
| 1.3.6.1.4.1.2272.1.1.65.1.5 | ColumnrcSysDnsHostAddressType | read-only | current | The type of ip address for the DNS host |
| 1.3.6.1.4.1.2272.1.1.65.1.6 | ColumnrcSysDnsHostAddress | read-only | current | The ip address of the DNS host |
| 1.3.6.1.4.1.2272.1.1.66 | ScalarrcSysMsgLogFrequency | read-only | current | Used to specify the maximum frequency/count of the occurence of the Log Message. |
| 1.3.6.1.4.1.2272.1.1.67 | ScalarrcSysMsgLogText | read-only | current | A textual string containing the first four characters of the Log Message. |
| 1.3.6.1.4.1.2272.1.1.68 | ScalarrcSysForceIpHdrSender | read-write | current | Flag to decide if IP header source address will be matched with SNMP header sender networks. |
| 1.3.6.1.4.1.2272.1.1.69 | ScalarrcSysVlanMaxId | read-only | current | The maximum vlan Id that supported |
| 1.3.6.1.4.1.2272.1.1.70 | ScalarrcSysDnsDomainName | read-write | current | Default domain used for querying the DNS Server. |
| 1.3.6.1.4.1.2272.1.1.71 | ScalarrcSysDnsServerListIpAddr | read-only | current | DNS server's IP address |
| 1.3.6.1.4.1.2272.1.1.72 | ScalarrcSysDnsRequestType | read-only | current | DNS Type: Whether it was Dns Request or a Response |
| 1.3.6.1.4.1.2272.1.1.73 | ScalarrcSysSpanningTreeOperMode | read-only | current | This object indicates the current spanning-tree mode of the system. . The meaning of specific values is: nortelStpg(1) .. The older proprietary mode which supp… |
| 1.3.6.1.4.1.2272.1.1.74 | ScalarrcSysSpanningTreeAdminMode | read-write | current | This object indicates the desired spanning-tree mode of the system. The meaning of specific values is: nortelStpg(1) .. The older proprietary mode which suppor… |
| 1.3.6.1.4.1.2272.1.1.75 | ScalarrcSysAutoRecoverDelay | read-write | current | Time interval in seconds after which auto-recovery runs on ports to clear action taken by cp-limit, link flap or loop detect |
| 1.3.6.1.4.1.2272.1.1.76 | ScalarrcSysMacFlapLimitTime | read-write | current | Time limit in milliseconds for MAC flapping for loop-detect feature |
| 1.3.6.1.4.1.2272.1.1.77 | ScalarrcSysMacFlapLimitCount | read-only | current | Number of times mac flapping can happen for loop-detect feature |
| 1.3.6.1.4.1.2272.1.1.78 | ScalarrcSysExtCplimitEnable | read-write | current | enable or disable extended CP-LIMIT in system. |
| 1.3.6.1.4.1.2272.1.1.79 | ScalarrcSysExtCplimitMinCongTime | read-write | current | Minimum time for which System octapid should be congested to trigger congestion algorithm for extended CP-LIMIT in mSecs |
| 1.3.6.1.4.1.2272.1.1.80 | ScalarrcSysExtCplimitMaxPorts | read-write | current | Maximum number of ports which need to be monitored for congestion in Extended CP-LIMIT |
| 1.3.6.1.4.1.2272.1.1.81 | ScalarrcSysExtCplimitPortCongTime | read-write | current | Minimum time for which ingress traffic utilization rate of a monitored port should stay more than the allowed limits in order to disable the port for extended … |
| 1.3.6.1.4.1.2272.1.1.82 | ScalarrcSysExtCplimitTrapLevel | read-write | current | Indicates the trap level for extended CP-LIMIT |
| 1.3.6.1.4.1.2272.1.1.83 | ScalarrcSysExtCplimitSysOctapidCongested | read-only | current | Indicates whether system octapid congestion detected for extended cp-limit |
| 1.3.6.1.4.1.2272.1.1.84 | ScalarrcSysExtCplimitPortsMonitored | read-only | current | Indicates whether ports has been shutdown due to extended cp-limit |
| 1.3.6.1.4.1.2272.1.1.85 | ScalarrcSysExtCplimitPortsShutDown | read-only | current | Indicates whether ports has been shutdown due to extended Cp-limit |
| 1.3.6.1.4.1.2272.1.1.86 | ScalarrcSysActionL1 | read-write | current | Initiate a system action for layer1 user |
| 1.3.6.1.4.1.2272.1.1.87 | ScalarrcSysActionL2 | read-write | current | Initiate a system action for layer2 user |
| 1.3.6.1.4.1.2272.1.1.88 | ScalarrcSysActionL3 | read-write | current | Initiate a system action for layer3 user |
| 1.3.6.1.4.1.2272.1.1.89 | ScalarrcSysActionRwa | read-write | current | Initiate a system action. |
| 1.3.6.1.4.1.2272.1.1.90 | ScalarrcSysPowerUsage | read-only | current | The current power usage for the whole chassis. |
| 1.3.6.1.4.1.2272.1.1.91 | ScalarrcSysPowerAvailable | read-only | current | The current power available for the whole chassis. |
| 1.3.6.1.4.1.2272.1.1.92 | ScalarrcSysBpduStartMacAddress | read-write | current | Starting Multicast MAC address for BPDUs |
| 1.3.6.1.4.1.2272.1.1.93 | ScalarrcSysBpduMacAddressMask | read-write | current | BPDU MAC address Mask |
| 1.3.6.1.4.1.2272.1.1.94 | TablercSysFrcMsgControlTable | not-accessible | current | Management Force-msg Control table. This table is used to specify the pattern for Force-msg Control |
| 1.3.6.1.4.1.2272.1.1.94.1 | RowrcSysFrcMsgControlEntry | not-accessible | current | A Force-msg Control table entry. |
| 1.3.6.1.4.1.2272.1.1.94.1.1 | ColumnrcSysFrcMsgControlPatternId | not-accessible | current | Pattern Id. |
| 1.3.6.1.4.1.2272.1.1.94.1.2 | ColumnrcSysFrcMsgControlPattern | read-write | current | Pattern for filtering the force-msg for msg control |
| 1.3.6.1.4.1.2272.1.1.94.1.3 | ColumnrcSysFrcMsgControlRowStatus | read-write | current | Used to create/delete an entry |
| 1.3.6.1.4.1.2272.1.1.95 | TablercSysAccPolSnmpGrpTable | not-accessible | current | SNMP group list for access policy |
| 1.3.6.1.4.1.2272.1.1.95.1 | RowrcSysAccPolSnmpGrpEntry | not-accessible | current | The table entry which covers the groups under snmp service. |
| 1.3.6.1.4.1.2272.1.1.95.1.1 | ColumnrcSysAccPolSnmpGrpName | not-accessible | current | The snmp-v3 group name |
| 1.3.6.1.4.1.2272.1.1.95.1.2 | ColumnrcSysAccPolSnmpGrpModel | not-accessible | current | The snmp model |
| 1.3.6.1.4.1.2272.1.1.95.1.3 | ColumnrcSysAccPolSnmpGrpRowStatus | read-write | current | Row status |
| 1.3.6.1.4.1.2272.1.1.96 | ScalarrcSysVirtualIpv6Addr | read-write | current | Virtual IP is an IP address that owned and advertised only by the master CPU. So whichever CPU is master registers this IP address. |
| 1.3.6.1.4.1.2272.1.1.97 | ScalarrcSysVirtualIpv6PrefixLength | read-write | current | The length of the virtual ipv6 addr prefix (in bits). |
| 1.3.6.1.4.1.2272.1.1.98 | ScalarrcSysConfigMode | read-write | current | This is used in conjunction with rcSysAction inorder to decide the mode in which the config file is going to be saved in. |
| 1.3.6.1.4.1.2272.1.1.99 | NodercSysExtendedPingBypass | |||
| 1.3.6.1.4.1.2272.1.1.99.1 | ScalarrcSysExtendedPingBypassOUI | read-write | current | 24-bit Organizationally Unique Idetifier. Information on OUIs can be found in IEEE 802-2001 Clause 9. |
| 1.3.6.1.4.1.2272.1.1.99.2 | ScalarrcSysExtendedPingBypassMaxRate | read-write | current | Rate Limit in Mbps. |
| 1.3.6.1.4.1.2272.1.1.99.3 | ScalarrcSysExtendedPingBypassAdminState | read-write | current | Admin control for extended ping bypass. |
| 1.3.6.1.4.1.2272.1.1.99.4 | ScalarrcSysExtendedPingBypassMatch | read-write | current | Bypass policer if the oui matches src-mac or dst-mac or either or both. |
| 1.3.6.1.4.1.2272.1.1.100 | ScalarrcSysLicenseTrialDaysLeft | read-only | current | This indicates days left before License Trial Period will expire. |
| 1.3.6.1.4.1.2272.1.1.101 | ScalarrcSysLicenseFileName | read-write | current | File name used in conjunction with rcSysAction. This file name will be used to specify a PLDS License file |
| 1.3.6.1.4.1.2272.1.1.102 | ScalarrcSysCopHighCpuUtilThreshold | read-write | current | CopHighCpuUtilThreshold % |
| 1.3.6.1.4.1.2272.1.1.103 | ScalarrcSysCopHighCpuUtilLogTime | read-write | current | rcSysCopHighCpuUtilLogTime in secs |
| 1.3.6.1.4.1.2272.1.1.104 | ScalarrcSysConfigChangeFlag | read-only | current | Indicates whether the config file has been changed after loading of config |
| 1.3.6.1.4.1.2272.1.1.105 | ScalarrcSysBootUpgradeMode | read-write | current | To set the mode of bootupgrade |
| 1.3.6.1.4.1.2272.1.1.106 | ScalarrcSysBootUpgradeTime | read-write | current | To set time for bootupgrade |
| 1.3.6.1.4.1.2272.1.1.107 | ScalarrcSysBootUpgradeCsuMode | read-write | current | To set the mode of Csu for bootupgrade |
| 1.3.6.1.4.1.2272.1.1.108 | ScalarrcSysUpgradeStatus | read-only | current | To get the Upgrade status |
| 1.3.6.1.4.1.2272.1.1.109 | ScalarrcSysUpgradeCompleteStatus | read-only | current | To get the Upgrade status |
| 1.3.6.1.4.1.2272.1.1.110 | ScalarrcSysBootUpgradeConsistencyCheck | read-write | current | To enable or disable the consistency check in BootUpgrade |
| 1.3.6.1.4.1.2272.1.1.111 | ScalarrcSysAutoSaveConfigState | read-write | current | To enable or disable the autosaveconfig feature |
| 1.3.6.1.4.1.2272.1.1.112 | ScalarrcSysAutoSaveConfigFileName | read-write | current | The auto config file name in which the configurations have to be saved automatically. |
| 1.3.6.1.4.1.2272.1.1.113 | ScalarrcSysAutoSaveConfigInterval | read-write | current | To set the Interval for autosave config |
| 1.3.6.1.4.1.2272.1.1.114 | ScalarrcSysAutoSaveConfigChangeFlag | read-only | current | Indicates whether there are any configuration changes after last auto save config. |
| 1.3.6.1.4.1.2272.1.1.115 | ScalarrcSysAutoSaveConfigCounter | read-only | current | Auto save config counter that should be prefixed to the filename. |
| 1.3.6.1.4.1.2272.1.1.116 | ScalarrcSysTotalPower | read-only | current | The total power for the whole chassis. |
| 1.3.6.1.4.1.2272.1.1.117 | ScalarrcSysRedundantPower | read-only | current | Used to indicate the redundant power on the chassis. The redundant power is per power supply unit |
| 1.3.6.1.4.1.2272.1.1.118 | ScalarrcSysAuthSuccessTrapEnable | read-write | current | Used to enable/disable the trap send for authenticaion success trap rcnAuthenticationSuccess. It only allow to be set when snmpEnableAuthenTraps is enabled. I … |
| 1.3.6.1.4.1.2272.1.1.119 | ScalarrcSysUdpSrcByVirtualIpEnable | read-write | current | Used to enable/disable virtual ip as udp source. |
| 1.3.6.1.4.1.2272.1.1.120 | TablercSysSoftwareTable | not-accessible | current | A list of software releases added to the switch. Maximum of 6 added releases can be present in the switch. |
| 1.3.6.1.4.1.2272.1.1.120.1 | RowrcSysSoftwareEntry | not-accessible | current | Defines a row of rcSysSoftware Table using RcSysSoftwareEntry Type. |
| 1.3.6.1.4.1.2272.1.1.120.1.1 | ColumnrcSysReleaseName | not-accessible | current | Software Release Name |
| 1.3.6.1.4.1.2272.1.1.120.1.2 | ColumnrcSysReleaseAddedTime | read-only | current | Software Release Added Date and Time |
| 1.3.6.1.4.1.2272.1.1.120.1.3 | ColumnrcSysReleaseActivatedTime | read-only | current | Software Release Activated Date and Time |
| 1.3.6.1.4.1.2272.1.1.120.1.4 | ColumnrcSysReleaseCommittedTime | read-only | current | Software Release Committed Date and Time |
| 1.3.6.1.4.1.2272.1.1.120.1.5 | ColumnrcSysReleaseCommittedType | read-only | current | Software Release Committed Type |
| 1.3.6.1.4.1.2272.1.1.120.1.6 | ColumnrcSysReleaseType | read-only | current | Software Release Type. This element tells whether the release is a primary release for the switch or a backup release or that the release has been added to the… |
| 1.3.6.1.4.1.2272.1.1.121 | ScalarrcSysDataPathFaultShutdownEnable | read-write | current | Used to enable/disable data path fault shutdown. |
| 1.3.6.1.4.1.2272.1.1.122 | ScalarrcSysDnsServerIpv6Addr | accessible-for-notify | current | DNS server's IP address . Used by trap rcnDNSv6RequestResponseTrap |
| 1.3.6.1.4.1.2272.1.2 | NodercTftp | |||
| 1.3.6.1.4.1.2272.1.2.1 | ScalarrcTftpHost | read-write | current | Name of source/destination host for the TFTP transfer. |
| 1.3.6.1.4.1.2272.1.2.2 | ScalarrcTftpFile | read-write | current | Name of file for the TFTP transfer. |
| 1.3.6.1.4.1.2272.1.2.3 | ScalarrcTftpAction | read-write | current | The action for the TFTP transfer. |
| 1.3.6.1.4.1.2272.1.2.4 | ScalarrcTftpResult | read-only | current | Contains result of the last Tftp action request. |
| 1.3.6.1.4.1.2272.1.3 | NodercVlan | |||
| 1.3.6.1.4.1.2272.1.3.1 | ScalarrcVlanNumVlans | read-only | current | The number of VLANs currently defined in the switch. |
| 1.3.6.1.4.1.2272.1.3.2 | TablercVlanTable | not-accessible | current | A list of Virtual LAN entries. The number of entries is given by rcVlanNumVlans. |
| 1.3.6.1.4.1.2272.1.3.2.1 | RowrcVlanEntry | not-accessible | current | Entry containing configuration information for a particular Virtual LAN. The relationship between the various port sets in a VLAN Entry are : o The set of port… |
| 1.3.6.1.4.1.2272.1.3.2.1.1 | ColumnrcVlanId | read-only | current | A value that uniquely identifies the Virtual LAN associated with this entry. This value corresponds to the lower 12 bits in the IEEE 802.1Q VLAN Tag. |
| 1.3.6.1.4.1.2272.1.3.2.1.2 | ColumnrcVlanName | read-write | current | An administratively-assigned name for this VLAN. |
| 1.3.6.1.4.1.2272.1.3.2.1.3 | ColumnrcVlanColor | read-write | current | An administratively-assigned color code for this VLAN. The value of this object is used by the VLAN Manager GUI tool to select a color when it draws this VLAN … |
| 1.3.6.1.4.1.2272.1.3.2.1.4 | ColumnrcVlanHighPriority | read-write | obsolete | A flag to note whether frames in this VLAN should be assigned a high switching priority. |
| 1.3.6.1.4.1.2272.1.3.2.1.5 | ColumnrcVlanRoutingEnable | read-write | obsolete | A flag to note whether IP routing is enabled in this VLAN. |
| 1.3.6.1.4.1.2272.1.3.2.1.6 | ColumnrcVlanIfIndex | read-only | current | When rcVlanRoutingEnable is set to true(1), this value indicates the 'logical' ifIndex assigned to this VLAN. Otherwise, this value is meaningless and should b… |
| 1.3.6.1.4.1.2272.1.3.2.1.7 | ColumnrcVlanAction | read-write | current | VLAN related actions. |
| 1.3.6.1.4.1.2272.1.3.2.1.8 | ColumnrcVlanResult | read-only | current | The result from the last VLAN action. |
| 1.3.6.1.4.1.2272.1.3.2.1.9 | ColumnrcVlanStgId | read-write | current | Indicates the Spanning Tree Group (STG) used by this VLAN to determine the state of its ports. If this VLAN is not associated with any STG, this value should b… |
| 1.3.6.1.4.1.2272.1.3.2.1.10 | ColumnrcVlanType | read-write | current | The type of VLAN, distinguished according to the policy used to define its port membership. VSP9000 does not support bySvlan(6) and ByIds(7). |
| 1.3.6.1.4.1.2272.1.3.2.1.11 | ColumnrcVlanPortMembers | read-write | current | The set of ports that are members (static or dynamic) of this VLAN. |
| 1.3.6.1.4.1.2272.1.3.2.1.12 | ColumnrcVlanActiveMembers | read-only | current | The set of ports that are currently active in this VLAN. Active ports include all static ports and any dynamic ports where the VLAN policy was met. |
| 1.3.6.1.4.1.2272.1.3.2.1.13 | ColumnrcVlanStaticMembers | read-write | current | The set of ports that are static members of this VLAN. A static member of a VLAN is always active and is never aged out. |
| 1.3.6.1.4.1.2272.1.3.2.1.14 | ColumnrcVlanNotAllowToJoin | read-write | current | The set of ports that are not allowed to become members of this VLAN. |
| 1.3.6.1.4.1.2272.1.3.2.1.15 | ColumnrcVlanProtocolId | read-write | current | The protocol identifier of this VLAN. This value is meaningful only if rcVlanType is equal to byProtocolId(3). For other VLAN types it should have the value no… |
| 1.3.6.1.4.1.2272.1.3.2.1.16 | ColumnrcVlanSubnetAddr | read-write | current | The IP subnet address of this VLAN. This value is meaningful only if rcVlanType is equal to byIpSubnet(2). For other VLAN types it should have the value 0.0.0.… |
| 1.3.6.1.4.1.2272.1.3.2.1.17 | ColumnrcVlanSubnetMask | read-write | current | The IP subnet mask of this VLAN. This value is meaningful only if rcVlanType is equal to byIpSubnet(2). For other VLAN types it should have the value 0.0.0.0. |
| 1.3.6.1.4.1.2272.1.3.2.1.18 | ColumnrcVlanAgingTime | read-write | current | The timeout period (in seconds) used for aging out dynamic members of this VLAN. This field is only relevant for policy-based VLANs. |
| 1.3.6.1.4.1.2272.1.3.2.1.19 | ColumnrcVlanMacAddress | read-only | current | The MAC address assigned to the virtual router interface of this VLAN. This field is meaningful only if rcVlanRoutingEnable is equal to true(1). |
| 1.3.6.1.4.1.2272.1.3.2.1.20 | ColumnrcVlanRowStatus | read-write | current | Used to create/delete entries in the rcVlanTable. |
| 1.3.6.1.4.1.2272.1.3.2.1.21 | ColumnrcVlanIgmpSnoopEnable | read-write | obsolete | A flag to note whether IGMP Snooping is enabled on this VLAN. |
| 1.3.6.1.4.1.2272.1.3.2.1.22 | ColumnrcVlanIgmpSnoopReportProxyEnable | read-write | obsolete | A flag to note whether IGMP Report Proxy is enabled on this VLAN. |
| 1.3.6.1.4.1.2272.1.3.2.1.23 | ColumnrcVlanIgmpSnoopRobustness | read-write | obsolete | This variable allows tuning for the expected packet loss on a subnet. If a subnet is expected to be lossy, the Robustness variable may be increased. IGMP is ro… |
| 1.3.6.1.4.1.2272.1.3.2.1.24 | ColumnrcVlanIgmpSnoopQueryInterval | read-write | obsolete | The interval (in seconds) between IGMP Host-Query packets transmitted on this interface. |
| 1.3.6.1.4.1.2272.1.3.2.1.25 | ColumnrcVlanIgmpSnoopMRouterPorts | read-write | obsolete | The set of ports in this VLAN that provide connectivity to an IP Multicast router. |
| 1.3.6.1.4.1.2272.1.3.2.1.26 | ColumnrcVlanUserDefinedPid | read-write | current | When rcVlanProtocolId is set to usrDefined(15) in a protocol-based VLAN, this field represents the 16-bit user defined protocol identifier. |
| 1.3.6.1.4.1.2272.1.3.2.1.27 | ColumnrcVlanIgmpSnoopActiveMRouterPorts | read-only | obsolete | Active ports. |
| 1.3.6.1.4.1.2272.1.3.2.1.28 | ColumnrcVlanProtocolIds | read-write | current | Bitfield of protocol ids. |
| 1.3.6.1.4.1.2272.1.3.2.1.29 | ColumnrcVlanIgmpSnoopActiveQuerier | read-only | obsolete | IP address of multicast querier router. |
| 1.3.6.1.4.1.2272.1.3.2.1.30 | ColumnrcVlanIgmpSnoopMRouterExpiration | read-only | obsolete | Multicast querier router aging time out. |
| 1.3.6.1.4.1.2272.1.3.2.1.31 | ColumnrcVlanIgmpSnoopQuerierPort | read-only | obsolete | The port on which the multicast querier router was heard. |
| 1.3.6.1.4.1.2272.1.3.2.1.32 | ColumnrcVlanUserPriority | read-only | current | User priority level. |
| 1.3.6.1.4.1.2272.1.3.2.1.33 | ColumnrcVlanQosLevel | read-write | current | Used to specify the Qos level packets, carried in this VLAN, should be processed with. |
| 1.3.6.1.4.1.2272.1.3.2.1.34 | ColumnrcVlanTosValue | read-write | current | Tos value. |
| 1.3.6.1.4.1.2272.1.3.2.1.35 | ColumnrcVlanEncap | read-write | current | This is the encapsulation type for userdefined protocol based vlans. This is not meaningful for other types of vlan. The default value is null. |
| 1.3.6.1.4.1.2272.1.3.2.1.36 | ColumnrcVlanFirewallVlanType | read-write | current | This is the firewall vlan type for port based vlans. |
| 1.3.6.1.4.1.2272.1.3.2.1.37 | ColumnrcVlanFdbAging | read-write | current | The timeout period (in seconds) used for aging out fdb entries of this VLAN. |
| 1.3.6.1.4.1.2272.1.3.2.1.38 | ColumnrcVlanUpdateDynamicMacQosLevel | read-create | current | It is used to indicate whether to update qos level for dynamic learned mac add resses associated with a subnet-based or protocol-based vlan when vlan qos level… |
| 1.3.6.1.4.1.2272.1.3.2.1.39 | ColumnrcVlanUserDefinedPidList | read-create | current | A list of Protocol Id to usrDefined in a protocol-based VLAN, this field represents the list user defined protocol identifier. |
| 1.3.6.1.4.1.2272.1.3.2.1.40 | ColumnrcVlanIgmpVer1SnoopMRouterPorts | read-create | current | The set of ports in this VLAN that provide connectivity to an IP Multicast router using IGMP Version 1. |
| 1.3.6.1.4.1.2272.1.3.2.1.41 | ColumnrcVlanIgmpVer2SnoopMRouterPorts | read-create | current | The set of ports in this VLAN that provide connectivity to an IP Multicast router using IGMP version 2. |
| 1.3.6.1.4.1.2272.1.3.2.1.42 | ColumnrcVlanTlsIpmc | read-create | current | Enable/disable the IP Mcast for this SP IP service Vlan for TLS OE feature |
| 1.3.6.1.4.1.2272.1.3.2.1.43 | ColumnrcVlanFirewallClusterId | read-write | current | Firewall cluster Id |
| 1.3.6.1.4.1.2272.1.3.2.1.44 | ColumnrcVlanOspfPassivePortMember | read-write | current | The set of ports in the vlan that are designated as ospf passive |
| 1.3.6.1.4.1.2272.1.3.2.1.45 | ColumnrcVlanUnkDstMacDiscard | read-write | current | Enable/disable Unknown Destination Mac Discard on Vlan |
| 1.3.6.1.4.1.2272.1.3.2.1.46 | ColumnrcVlanNlbMode | read-write | current | NLB mode set on a VLAN. |
| 1.3.6.1.4.1.2272.1.3.2.1.47 | ColumnrcVlanOperNlbMode | read-only | current | Oper NLB mode of a VLAN. |
| 1.3.6.1.4.1.2272.1.3.2.1.48 | ColumnrcVlanVrfId | read-write | current | Indicates the Virtual Router to which the VLAN belongs |
| 1.3.6.1.4.1.2272.1.3.2.1.49 | ColumnrcVlanVrfName | read-only | current | The Name of the Virtual Router to which the VLAN belongs |
| 1.3.6.1.4.1.2272.1.3.2.1.50 | ColumnrcVlanMgmtVlan | read-only | current | This displays the management vlan configuration |
| 1.3.6.1.4.1.2272.1.3.2.1.51 | ColumnrcVlanApplyBtagEthertype | read-create | current | Used to apply user configured btag ethertype to the Vlan |
| 1.3.6.1.4.1.2272.1.3.2.1.52 | ColumnrcVlanMmrp | read-create | current | This displays the MMRP enable state for the vlan |
| 1.3.6.1.4.1.2272.1.3.2.1.53 | ColumnrcVlanSource | read-only | current | This object indicates how this VLAN was created: static(1) - Indicates the VLAN was manually configured by an operator. dynamicMvmp(2) - Indicates the VLAN was… |
| 1.3.6.1.4.1.2272.1.3.2.1.54 | ColumnrcVlanNodalMepList | read-write | current | List of nodal Meps assigned to this vlan. A mep consists of Domain Name, Association name and Mep Id separated by '.'. Each meps is separated by ',': <md1>.<ma… |
| 1.3.6.1.4.1.2272.1.3.2.1.55 | ColumnrcVlanNumOfNodalMep | read-only | current | Number of nodal meps assigned to this vlan |
| 1.3.6.1.4.1.2272.1.3.2.1.56 | ColumnrcVlanNodalMipLevelList | read-write | current | List of nodal Mip levels assigned to this vlan that allows Mip functionality to be enabled on a per level per vlan basis. A mip level is represented by an inte… |
| 1.3.6.1.4.1.2272.1.3.2.1.57 | ColumnrcVlanNumOfNodalMipLevel | read-only | current | Number of nodal mip levels assigned to this vlan that allows MIP functionality to be enabled on a per level per vlan basis. |
| 1.3.6.1.4.1.2272.1.3.2.1.58 | ColumnrcVlanDhcpOption82Enabled | read-create | current | This object is used to control whether DHCP option 82 is enabled for this VLAN. |
| 1.3.6.1.4.1.2272.1.3.2.1.59 | ColumnrcVlanIpMultinettingEnable | read-write | current | Indicate if the vlan is an Ip Multinetting vlan. If enabled, rcVlanAssociatedIpMultinettingVlan should be set to 0 |
| 1.3.6.1.4.1.2272.1.3.2.1.60 | ColumnrcVlanAssociatedIpMultinettingVlan | read-write | current | Associated Ip Multinetting vlan Id whose rcVlanIpMultinettingEnable attribute is set |
| 1.3.6.1.4.1.2272.1.3.2.1.61 | ColumnrcVlanPlsbIsid | read-write | current | Plsb i-sid number assigned to a C-vlan or the i-sid value for primary private VLAN. Default 0 value indicates that no i-sid has been assigned. |
| 1.3.6.1.4.1.2272.1.3.2.1.62 | ColumnrcVlanVoiceEnabled | read-write | current | This object is used to control whether voice option is enabled for this VLAN. |
| 1.3.6.1.4.1.2272.1.3.2.1.63 | ColumnrcVlanRmonEnable | read-write | current | Indicate if the vlan is enabled for Remote Monitoring |
| 1.3.6.1.4.1.2272.1.3.2.1.64 | ColumnrcVlanIpsecEnable | read-write | deprecated | Indicate if the vlan is enabled for IPSEC. at place of this value use RcIpConfEntry for IPV4 and use RcIpv6InterfaceEntry for IPV6. This field changed to depre… |
| 1.3.6.1.4.1.2272.1.3.2.1.65 | ColumnrcVlanLPortMembers | read-only | current | The set of logical ports (for example, WLAN tunnels) that are members (dynamic) of this VLAN. |
| 1.3.6.1.4.1.2272.1.3.2.1.66 | ColumnrcVlanLPortActiveMembers | read-only | current | The set of logical ports (for example, WLAN tunnels) that are currently active in this VLAN. Active ports include all dynamic ports where the VLAN policy was m… |
| 1.3.6.1.4.1.2272.1.3.2.1.67 | ColumnrcVlanLPortStaticMembers | read-only | current | The set of logical ports (for example, WLAN tunnels) that are static members of this VLAN. A static member of a VLAN is always active and is never aged out. |
| 1.3.6.1.4.1.2272.1.3.2.1.68 | ColumnrcVlanLPortNotAllowToJoin | read-only | current | The set of logical ports (for example, WLAN tunnels) that are not allowed to become members of this VLAN. |
| 1.3.6.1.4.1.2272.1.3.2.1.69 | ColumnrcVlanRspanEnabled | read-write | current | This object is used to control whether rspan option is enabled for this VLAN. |
| 1.3.6.1.4.1.2272.1.3.2.1.70 | ColumnrcVlanSpbMcast | read-write | current | Enable/disable SPB multicast on Vlan |
| 1.3.6.1.4.1.2272.1.3.2.1.71 | ColumnrcVlanSecondaryVlanId | read-write | current | A value that uniquely identifies the secondary Virtual LAN associated with the primary private VLAN. This value corresponds to the lower 12 bits in the IEEE 80… |
| 1.3.6.1.4.1.2272.1.3.2.1.72 | ColumnrcVlanSecondaryIsid | read-write | current | The i-sid number assigned to a secondary VLAN if it exists. Default 0 value. |
| 1.3.6.1.4.1.2272.1.3.2.1.73 | ColumnrcVlanPimGatewayEnable | read-create | current | Enable/disable PIM Gateway on Vlan |
| 1.3.6.1.4.1.2272.1.3.2.1.74 | ColumnrcVlanIpv6FhsSnoopDhcpEnable | read-create | current | Indicate if IPv6 DHCP snooping is enabled on the vlan |
| 1.3.6.1.4.1.2272.1.3.2.1.75 | ColumnrcVlanIpv6FhsNDInspectionEnable | read-create | current | Indicate if ND inspection is enabled on the vlan |
| 1.3.6.1.4.1.2272.1.3.2.1.76 | ColumnrcVlanDvrEnable | read-create | current | Enable/disable DVR on Vlan |
| 1.3.6.1.4.1.2272.1.3.2.1.77 | ColumnrcVlanDvrGwIpv4Addr | read-create | current | Gateway IPv4 address for this DVR enabled node on Vlan. |
| 1.3.6.1.4.1.2272.1.3.2.1.78 | ColumnrcVlanUntaggedPortMembers | read-create | current | The set of untagged ports that are members of this VLAN. |
| 1.3.6.1.4.1.2272.1.3.3 | TablercVlanPortTable | not-accessible | current | A table used to maintain VLAN port related information. |
| 1.3.6.1.4.1.2272.1.3.3.1 | RowrcVlanPortEntry | not-accessible | current | Entry containing VLAN information regarding a particular port. |
| 1.3.6.1.4.1.2272.1.3.3.1.1 | ColumnrcVlanPortIndex | read-only | current | An unique index used to identify a particular port in the system. This index is equal to the ifIndex of the port. |
| 1.3.6.1.4.1.2272.1.3.3.1.2 | ColumnrcVlanPortNumVlanIds | read-only | current | Used to indicate the number of VLAN IDs that are stored in the rcVlanPortVlanIds variable. |
| 1.3.6.1.4.1.2272.1.3.3.1.3 | ColumnrcVlanPortVlanIds | read-write | current | An array used to identify which VLANs this port is assigned to. Each VLAN ID is stored as a two octet value. The first octet in the pair holds bits 15-8 of the… |
| 1.3.6.1.4.1.2272.1.3.3.1.4 | ColumnrcVlanPortType | read-write | current | The type of port: access(1) or trunk(2). |
| 1.3.6.1.4.1.2272.1.3.3.1.5 | ColumnrcVlanPortDiscardTaggedFrames | read-write | current | A flag used to determine how to process tagged frames received on this access port. When the flag is set, these frames are discarded by the forwarding process.… |
| 1.3.6.1.4.1.2272.1.3.3.1.6 | ColumnrcVlanPortDiscardUntaggedFrames | read-write | current | A flag used to determine how to process untagged frames received on this trunk port. When the flag is set, these frames are discarded by the forwarding process… |
| 1.3.6.1.4.1.2272.1.3.3.1.7 | ColumnrcVlanPortDefaultVlanId | read-write | current | The VLAN ID assigned to untagged frames received on this trunk port. This field is meaningless when the port is not a trunk port. |
| 1.3.6.1.4.1.2272.1.3.3.1.8 | ColumnrcVlanPortPerformTagging | read-write | current | Enable/disable the port on the current vlan to perform tagging on the incoming and outgoing traffic. |
| 1.3.6.1.4.1.2272.1.3.3.1.9 | ColumnrcVlanPortSVlanPortType | read-write | current | The type of port. |
| 1.3.6.1.4.1.2272.1.3.3.1.10 | ColumnrcVlanPortLoopDetect | read-write | current | Enable/disable loop detection on this port |
| 1.3.6.1.4.1.2272.1.3.3.1.11 | ColumnrcVlanPortFirstPortInOpid | read-only | current | This value gives the IfIndex of the first port in the octapid. This value is used to generate an error message when changing port type from normal to uni/nni a… |
| 1.3.6.1.4.1.2272.1.3.3.1.12 | ColumnrcVlanPortLastPortInOpid | read-only | current | This value gives the IfIndex of the first port in the octapid. This value is used to generate an error message when changing port type from normal to uni/nni a… |
| 1.3.6.1.4.1.2272.1.3.3.1.13 | ColumnrcVlanPortUntagDefaultVlan | read-write | current | enable/disable Egress Tagging on the Default Vlan of the port. |
| 1.3.6.1.4.1.2272.1.3.3.1.14 | ColumnrcVlanPortLoopDetectAction | read-write | current | This value is used to specify the action which needs to be taken once a loop is detected on a specific port. VlanBlock is not supported in VSP9000. |
| 1.3.6.1.4.1.2272.1.3.3.1.15 | ColumnrcVlanPortArpDetect | read-write | current | Enable/disable Arp detection on this port |
| 1.3.6.1.4.1.2272.1.3.3.1.16 | ColumnrcVlanPortSpoofDetect | read-write | current | Enable/disable spoof detection on this port |
| 1.3.6.1.4.1.2272.1.3.3.1.17 | ColumnrcVlanPortRemarking | read-write | current | Enable/disable remarking on this port |
| 1.3.6.1.4.1.2272.1.3.3.1.18 | ColumnrcVlanPortClassificationSubnet | read-write | current | Enable/disable Subnet based Vlan packets on this port. |
| 1.3.6.1.4.1.2272.1.3.3.1.19 | ColumnrcVlanPortClassificationProtocol | read-write | current | Enable/disable Protocol based Vlan packets on this port. |
| 1.3.6.1.4.1.2272.1.3.3.1.20 | ColumnrcVlanPortClassificationPrec | read-write | current | Sets the precedence for vlan classification. A value of 1 puts classification of packets to source mac vlans ahead of subnet based vlans. A value of 2 puts sub… |
| 1.3.6.1.4.1.2272.1.3.3.1.21 | ColumnrcVlanPortVlanIdList | read-write | current | This bitfield is used to identify which VLANs this port is assigned to. Each VLAN ID is stored as a bit. The most-significant (left-most) bit represents Vlan I… |
| 1.3.6.1.4.1.2272.1.3.3.1.22 | ColumnrcVlanPortClassificationSourceMac | read-write | current | Enable/disable SourceMac based Vlan packets on this port. |
| 1.3.6.1.4.1.2272.1.3.3.1.23 | ColumnrcVlanPortPrivateVlanPortType | read-write | current | The type of port associated with private VLAN. If the VLAN is not private then this is ignored. If the VLAN is private then the value must be either trunk, iso… |
| 1.3.6.1.4.1.2272.1.3.3.1.24 | ColumnrcVlanPortUntaggedVlanIds | read-only | current | This object is used to identify which VLANs this port is associated with as untagged. |
| 1.3.6.1.4.1.2272.1.3.4 | TablercVlanMacTable | not-accessible | current | A table used to maintain MAC addresses assigned to a particular VLAN by MAC address. |
| 1.3.6.1.4.1.2272.1.3.4.1 | RowrcVlanMacEntry | not-accessible | current | Entry containing VLAN information regarding a particular port. |
| 1.3.6.1.4.1.2272.1.3.4.1.1 | ColumnrcVlanMacVlanId | read-only | current | An unique index used to identify a VLAN (by MAC address) in the system. |
| 1.3.6.1.4.1.2272.1.3.4.1.2 | ColumnrcVlanMacAddr | read-only | current | An unique index used to identify a MAC address assigned to a particular VLAN. |
| 1.3.6.1.4.1.2272.1.3.4.1.3 | ColumnrcVlanMacRowStatus | read-write | current | Row status for this entry. |
| 1.3.6.1.4.1.2272.1.3.5 | ScalarrcVlanIgmpSnoopNumGroups | read-only | current | The number of entries (rows) in the rcVlanIgmpSnoopTable. |
| 1.3.6.1.4.1.2272.1.3.6 | TablercVlanIgmpSnoopTable | not-accessible | obsolete | The (conceptual) table listing the IP multicast groups for which there are members on a particular interface on a particular VLAN (i.e., a list known multicast… |
| 1.3.6.1.4.1.2272.1.3.6.1 | RowrcVlanIgmpSnoopEntry | not-accessible | obsolete | An entry (row) in the rcVlanIgmpSnoopTable. |
| 1.3.6.1.4.1.2272.1.3.6.1.1 | ColumnrcVlanIgmpSnoopVlanId | read-only | obsolete | The VLAN for which this entry contains information. |
| 1.3.6.1.4.1.2272.1.3.6.1.2 | ColumnrcVlanIgmpSnoopIpAddress | read-only | obsolete | The IP multicast group address for which this entry contains information. |
| 1.3.6.1.4.1.2272.1.3.6.1.3 | ColumnrcVlanIgmpSnoopIfIndex | read-only | obsolete | The interface for which this entry contains information for this IP multicast group address (i.e., the port the Join message was received). |
| 1.3.6.1.4.1.2272.1.3.6.1.4 | ColumnrcVlanIgmpSnoopMember | read-only | obsolete | The IP Address of the source of the membership report received for this IP Multicast group address on this interface (i.e., the address of the host sending the… |
| 1.3.6.1.4.1.2272.1.3.6.1.5 | ColumnrcVlanIgmpSnoopExpiration | read-only | obsolete | The minimum amount of time remaining before this entry will be aged out. |
| 1.3.6.1.4.1.2272.1.3.6.1.6 | ColumnrcVlanIgmpSnoopType | read-only | obsolete | The type of entry: dynamic(1) entries are created by snooping IGMP messages, static(2) entries are created via management. |
| 1.3.6.1.4.1.2272.1.3.7 | TablercVlanIgmpSnoopStaticTable | not-accessible | obsolete | The (conceptual) table listing the statically- defined IP multicast groups for which there are members on a particular interface on a particular VLAN. |
| 1.3.6.1.4.1.2272.1.3.7.1 | RowrcVlanIgmpSnoopStaticEntry | not-accessible | obsolete | An entry (row) in the rcVlanIgmpSnoopStaticTable. |
| 1.3.6.1.4.1.2272.1.3.7.1.1 | ColumnrcVlanIgmpSnoopStaticVlanId | read-only | obsolete | The VLAN for which this entry contains information. |
| 1.3.6.1.4.1.2272.1.3.7.1.2 | ColumnrcVlanIgmpSnoopStaticIpAddress | read-only | obsolete | The IP multicast group address for which this entry contains information. The address must fall within 224.0.1.0 to 239.255.255.255. |
| 1.3.6.1.4.1.2272.1.3.7.1.3 | ColumnrcVlanIgmpSnoopStaticMemberPorts | read-write | obsolete | The set of ports in this VLAN multicast traffic for the rcVlanIgmpSnoopStaticIpAddress is to be forwarded to. |
| 1.3.6.1.4.1.2272.1.3.7.1.4 | ColumnrcVlanIgmpSnoopStaticRowStatus | read-write | obsolete | Used to create/delete entries in the rcVlanIgmpSnoopStaticTable. |
| 1.3.6.1.4.1.2272.1.3.7.1.5 | ColumnrcVlanIgmpSnoopStaticNotAllowedToJoin | read-write | obsolete | Not allowed to join |
| 1.3.6.1.4.1.2272.1.3.8 | TablercVlanIgmpSnoopAccessTable | not-accessible | obsolete | Table used to specify which host(s) can send and/or receive IP Multicast traffic. |
| 1.3.6.1.4.1.2272.1.3.8.1 | RowrcVlanIgmpSnoopAccessEntry | not-accessible | obsolete | An entry (row) in the rcVlanIgmpSnoopAccessTable. |
| 1.3.6.1.4.1.2272.1.3.8.1.1 | ColumnrcVlanIgmpSnoopAccessVlanId | read-only | obsolete | The VLAN for which this entry contains information. |
| 1.3.6.1.4.1.2272.1.3.8.1.2 | ColumnrcVlanIgmpSnoopAccessGrpAddr | read-only | obsolete | The IP multicast group address for which this entry contains information. |
| 1.3.6.1.4.1.2272.1.3.8.1.3 | ColumnrcVlanIgmpSnoopAccessHostAddr | read-only | obsolete | The IP address of a host for which this entry contains information. |
| 1.3.6.1.4.1.2272.1.3.8.1.4 | ColumnrcVlanIgmpSnoopAccessHostMask | read-only | obsolete | The IP netmask of a host for which this entry contains information. |
| 1.3.6.1.4.1.2272.1.3.8.1.5 | ColumnrcVlanIgmpSnoopAccessMode | read-write | obsolete | Used to specify whether the host identified by rcVlanIgmpSnoopAccessHostAddr should be denied IP multicast transmit, receive, or both. |
| 1.3.6.1.4.1.2272.1.3.8.1.6 | ColumnrcVlanIgmpSnoopAccessRowStatus | read-write | obsolete | Row status |
| 1.3.6.1.4.1.2272.1.3.9 | TablercVlanIgmpSnoopSenderTable | not-accessible | obsolete | The (conceptual) table listing the IP multicast groups for which there are members on a particular interface on a particular VLAN (i.e., a list known multicast… |
| 1.3.6.1.4.1.2272.1.3.9.1 | RowrcVlanIgmpSnoopSenderEntry | not-accessible | obsolete | An entry (row) in the rcVlanIgmpSnoopSenderTable. |
| 1.3.6.1.4.1.2272.1.3.9.1.1 | ColumnrcVlanIgmpSnoopSenderVlanId | read-only | obsolete | The VLAN for which this entry contains information. |
| 1.3.6.1.4.1.2272.1.3.9.1.2 | ColumnrcVlanIgmpSnoopSenderIpAddress | read-only | obsolete | The IP multicast group address for which this entry contains information. |
| 1.3.6.1.4.1.2272.1.3.9.1.3 | ColumnrcVlanIgmpSnoopSenderIfIndex | read-only | obsolete | The interface for which this entry contains information for this IP multicast group address (i.e., the port the multicast traffic was received). |
| 1.3.6.1.4.1.2272.1.3.9.1.4 | ColumnrcVlanIgmpSnoopSenderMember | read-only | obsolete | The IP Address of the host sending the multicast traffic. |
| 1.3.6.1.4.1.2272.1.3.9.1.5 | ColumnrcVlanIgmpSnoopSenderAction | read-write | obsolete | Used to specify an action to perform on this group. |
| 1.3.6.1.4.1.2272.1.3.10 | TablercVlanLoopDetectedTable | not-accessible | current | A list of Vlans the port belongs to and the corresponding loop detected status. |
| 1.3.6.1.4.1.2272.1.3.10.1 | RowrcVlanLoopDetectedEntry | not-accessible | current | Loop-Detected Entry. |
| 1.3.6.1.4.1.2272.1.3.10.1.1 | ColumnrcVlanLoopDetectedPortIndex | read-only | current | Port Number. |
| 1.3.6.1.4.1.2272.1.3.10.1.2 | ColumnrcVlanLoopDetectedVlanId | read-only | current | Gives the VlanId to which the port belongs. |
| 1.3.6.1.4.1.2272.1.3.10.1.3 | ColumnrcVlanLoopDetectedValue | read-only | current | Gives the Loop Detected status of the port in a vlan. |
| 1.3.6.1.4.1.2272.1.3.11 | TablercVlanDsapSsapTable | not-accessible | current | A table used to maintain DSAP/SSAP values assigned to a sna802dot2 or userdefined vlan. |
| 1.3.6.1.4.1.2272.1.3.11.1 | RowrcVlanDsapSsapEntry | not-accessible | current | An entry in the rcVlanDsapSsap table. |
| 1.3.6.1.4.1.2272.1.3.11.1.1 | ColumnrcVlanDsapSsapVlanId | not-accessible | current | A unique index to identify a vlan. |
| 1.3.6.1.4.1.2272.1.3.11.1.2 | ColumnrcVlanDsapSsapPid | not-accessible | current | Values of DSAP/SSAP assigned to a particular vlan. |
| 1.3.6.1.4.1.2272.1.3.11.1.3 | ColumnrcVlanDsapSsapRowStatus | read-write | current | Row Status. |
| 1.3.6.1.4.1.2272.1.3.12 | TablercVlanNewLoopDetectedTable | not-accessible | current | A list of Vlans the port belongs to and the corresponding loop detected status. |
| 1.3.6.1.4.1.2272.1.3.12.1 | RowrcVlanNewLoopDetectedEntry | not-accessible | current | Loop-Detected Entry. |
| 1.3.6.1.4.1.2272.1.3.12.1.1 | ColumnrcVlanNewLoopDetectedPortIndex | not-accessible | current | Port Number. |
| 1.3.6.1.4.1.2272.1.3.12.1.2 | ColumnrcVlanNewLoopDetectedVlanId | not-accessible | current | Gives the VlanId to which the port belongs. |
| 1.3.6.1.4.1.2272.1.3.12.1.3 | ColumnrcVlanNewLoopDetectedMac | not-accessible | current | Mac address |
| 1.3.6.1.4.1.2272.1.3.12.1.4 | ColumnrcVlanNewLoopDetectedAction | read-only | current | This value is used to specify the action which needs to be taken once a loop is detected on a specific port. |
| 1.3.6.1.4.1.2272.1.3.12.1.5 | ColumnrcVlanNewLoopDetectedSmltRemote | read-only | current | A MAC address indicate for remote learnt, either local or remote. |
| 1.3.6.1.4.1.2272.1.3.13 | TablercVlanPortCfmMepTable | not-accessible | current | A table used to maintain CFM MEP assigned to the port in a vlan |
| 1.3.6.1.4.1.2272.1.3.13.1 | RowrcVlanPortCfmMepEntry | not-accessible | current | An entry in the rcVlanPortCfmMep table. |
| 1.3.6.1.4.1.2272.1.3.13.1.1 | ColumnrcVlanPortCfmMepVlanId | not-accessible | current | A unique index to identify a vlan. |
| 1.3.6.1.4.1.2272.1.3.13.1.2 | ColumnrcVlanPortCfmMepPort | not-accessible | current | A unique index to identify a port interface in a Vlan. |
| 1.3.6.1.4.1.2272.1.3.13.1.3 | ColumnrcVlanPortCfmMepMepList | read-create | current | List of Meps assigned to this entry. A mep is consist of <md>.<ma>.<mep_id>. Domain Name, Association and Mep Id is separated by '.' A list of mep is consist o… |
| 1.3.6.1.4.1.2272.1.3.13.1.4 | ColumnrcVlanPortCfmMepNumOfMep | read-only | current | Used to indicate the number of Meps is assigned to this entry |
| 1.3.6.1.4.1.2272.1.3.13.1.5 | ColumnrcVlanPortCfmMepRowStatus | read-create | current | Row Create attibute. For perfomace and efficience, rcVlanPortCfmMepMepList is required for creation. If any Mep is added, entry would be created. If all Mep ar… |
| 1.3.6.1.4.1.2272.1.3.14 | TablercVlanPortCfmMipTable | not-accessible | current | A table used to maintain CFM MIP assigned to the port in a vlan |
| 1.3.6.1.4.1.2272.1.3.14.1 | RowrcVlanPortCfmMipEntry | not-accessible | current | An entry in the rcVlanPortCfmMip table. |
| 1.3.6.1.4.1.2272.1.3.14.1.1 | ColumnrcVlanPortCfmMipVlanId | not-accessible | current | A unique index to identify a vlan. |
| 1.3.6.1.4.1.2272.1.3.14.1.2 | ColumnrcVlanPortCfmMipPort | not-accessible | current | A unique index to identify a port interface in a Vlan. |
| 1.3.6.1.4.1.2272.1.3.14.1.3 | ColumnrcVlanPortCfmMipMipList | read-create | current | List of Mips assigned to this entry. A mip is consist of <md>.<mip_id>. Domain Name and Mip Id is separated by '.' A list of mip is consist of <md1>.<mipid1>,<… |
| 1.3.6.1.4.1.2272.1.3.14.1.4 | ColumnrcVlanPortCfmMipNumOfMip | read-only | current | Used to indicate the number of Mips is assigned to this entry |
| 1.3.6.1.4.1.2272.1.3.14.1.5 | ColumnrcVlanPortCfmMipRowStatus | read-create | current | Row Create attibute. For perfomace and efficience, rcVlanPortCfmMipMipList is required for creation. If any Mip is added, entry would be created. If all Mip ar… |
| 1.3.6.1.4.1.2272.1.3.15 | TablercVlanExtFilterSvcTable | not-accessible | current | Extended filtering services per port per Vlans are defined in this table |
| 1.3.6.1.4.1.2272.1.3.15.1 | RowrcVlanExtFilterSvcEntry | not-accessible | current | Used to indicate the extended filtering services. Extended filtering services are per port per Vlan. |
| 1.3.6.1.4.1.2272.1.3.15.1.1 | ColumnrcVlanExtFilterSvcVlanId | not-accessible | current | A value that uniquely identifies the Virtual LAN associated with this entry. This value corresponds to the lower 12 bits in the IEEE 802.1Q VLAN Tag. |
| 1.3.6.1.4.1.2272.1.3.15.1.2 | ColumnrcVlanExtFilterSvcFwdAllPorts | read-write | current | Contains port list that are in ForwardAll mode. |
| 1.3.6.1.4.1.2272.1.3.15.1.3 | ColumnrcVlanExtFilterSvcFwdUnregPorts | read-write | current | Contains port list that are in Forward Unregistered mode. |
| 1.3.6.1.4.1.2272.1.3.15.1.4 | ColumnrcVlanExtFilterSvcFilterUnregPorts | read-write | current | Contains port list that are in Filter Unregistered mode. |
| 1.3.6.1.4.1.2272.1.3.16 | TablercVlanPortSpoofDetectTable | not-accessible | current | Table containing spoof-detect block entries. |
| 1.3.6.1.4.1.2272.1.3.16.1 | RowrcVlanPortSpoofDetectEntry | not-accessible | current | This entry, which contains port index, VLAN ID, IP address and MAC address, is used to indicate which MAC address is starting IP-Spoof attack and which gateway… |
| 1.3.6.1.4.1.2272.1.3.16.1.1 | ColumnrcVlanPortSpoofDetectIndex | not-accessible | current | The auxiliary variable for identifying instances of the columnar objects in the spoof detect table. |
| 1.3.6.1.4.1.2272.1.3.16.1.2 | ColumnrcVlanPortSpoofDetectSpoofedIpAddressType | read-only | current | IP address type of address under spoof attack. |
| 1.3.6.1.4.1.2272.1.3.16.1.3 | ColumnrcVlanPortSpoofDetectSpoofedIpAddress | read-only | current | IP address that has been detected under spoof attack. |
| 1.3.6.1.4.1.2272.1.3.16.1.4 | ColumnrcVlanPortSpoofDetectSpoofedMacAddress | read-only | current | MAC address that has sent out spoofing ARP. |
| 1.3.6.1.4.1.2272.1.3.16.1.5 | ColumnrcVlanPortSpoofDetectPort | read-only | current | Port index that has enabled spoof-detect. |
| 1.3.6.1.4.1.2272.1.3.16.1.6 | ColumnrcVlanPortSpoofDetectVlanId | read-only | current | VLAN ID that has been detected under spoof attack. |
| 1.3.6.1.4.1.2272.1.3.17 | TablercVlanClearMacRecordTable | not-accessible | current | Table used to clear a Vlan MAC Record. |
| 1.3.6.1.4.1.2272.1.3.17.1 | RowrcVlanClearMacRecordEntry | not-accessible | current | Vlan Clear Mac Record Table Entry |
| 1.3.6.1.4.1.2272.1.3.17.1.1 | ColumnrcVlanClearMacRecordAddr | not-accessible | current | Mac Address that needs to be cleared. |
| 1.3.6.1.4.1.2272.1.3.17.1.2 | ColumnrcVlanClearMacRecordVlanId | read-write | current | Vlan Id where the Mac record has to be cleared. |
| 1.3.6.1.4.1.2272.1.3.17.1.3 | ColumnrcVlanClearMacRecordAllVlanIds | read-write | current | When set to true, this will clear the MAC record on all the Vlan Ids it exists. |
| 1.3.6.1.4.1.2272.1.3.17.1.4 | ColumnrcVlanClearMacRecordForceDelete | read-write | current | By default, when ForceDelete is set to false, MAC record will not be cleared if an ARP record is associated with this Mac Address. If ForceDelete is set to Tru… |
| 1.3.6.1.4.1.2272.1.3.17.1.5 | ColumnrcVlanClearMacRecordLCForceDelete | read-write | current | By default, when LCForceDelete (Line Card Force Delete) is set to false, if the MAC record is not found on the CP, then no message will be sent to the line-car… |
| 1.3.6.1.4.1.2272.1.3.18 | TablercVlanNameTable | not-accessible | current | A table that can be used to map the Virtual LAN Id to IfIndex and Name for display. It is informational only. |
| 1.3.6.1.4.1.2272.1.3.18.1 | RowrcVlanNameEntry | not-accessible | current | Each entry has mapping information for a particular Virtual LAN. This in intended for display purposes only. |
| 1.3.6.1.4.1.2272.1.3.18.1.1 | ColumnrcVlanNameVlanId | not-accessible | current | A value that uniquely identifies the Virtual LAN associated with this entry. This value corresponds to the lower 12 bits in the IEEE 802.1Q VLAN Tag. |
| 1.3.6.1.4.1.2272.1.3.18.1.2 | ColumnrcVlanNameVlanName | read-only | current | The assigned name for this VLAN. |
| 1.3.6.1.4.1.2272.1.3.18.1.3 | ColumnrcVlanNameIfIndex | read-only | current | When rcVlanRoutingEnable is set to true(1), this value indicates the 'logical' ifIndex assigned to this VLAN. Otherwise, this value is meaningless and will be … |
| 1.3.6.1.4.1.2272.1.3.19 | TablercVlanPortSpoofMacTable | not-accessible | current | A table contains a list of Spoof blocked MAC address information. |
| 1.3.6.1.4.1.2272.1.3.19.1 | RowrcVlanPortSpoofMacEntry | not-accessible | current | Entry containing a spoof blocked MAC address |
| 1.3.6.1.4.1.2272.1.3.19.1.1 | ColumnrcVlanPortSpoofMacPortNum | not-accessible | current | Port interface number of the Spoof detect is enabled. Spoof mac is detected |
| 1.3.6.1.4.1.2272.1.3.19.1.2 | ColumnrcVlanPortSpoofMacVlanId | not-accessible | current | A vlan entry which the port intreface belong to. And the spoof MAC is detected |
| 1.3.6.1.4.1.2272.1.3.19.1.3 | ColumnrcVlanPortSpoofMacIpAddress | not-accessible | current | A Local Ip address on this interface |
| 1.3.6.1.4.1.2272.1.3.19.1.4 | ColumnrcVlanPortSpoofMacMacAddress | not-accessible | current | A spoofing Mac address that is detected in this interface |
| 1.3.6.1.4.1.2272.1.3.19.1.5 | ColumnrcVlanPortSpoofMacClearMac | read-write | current | Clear/delete this spoof detect mac entry when it is true. It always return false when query |
| 1.3.6.1.4.1.2272.1.4 | NodercChassis | |||
| 1.3.6.1.4.1.2272.1.4.1 | ScalarrcChasType | read-only | current | Chassis Type |
| 1.3.6.1.4.1.2272.1.4.2 | ScalarrcChasSerialNumber | read-only | current | Unique serial number for this chassis. |
| 1.3.6.1.4.1.2272.1.4.3 | ScalarrcChasHardwareRevision | read-only | current | Device hardware revision level |
| 1.3.6.1.4.1.2272.1.4.4 | ScalarrcChasNumSlots | read-only | current | The number of slots in the chassis available for plug-in cards. |
| 1.3.6.1.4.1.2272.1.4.5 | ScalarrcChasNumPorts | read-only | current | The total number of ports currently installed in the chassis. |
| 1.3.6.1.4.1.2272.1.4.6 | ScalarrcChasTestResult | read-only | current | Chassis start-up diagnostic tests. |
| 1.3.6.1.4.1.2272.1.4.7 | NodercChasFan | |||
| 1.3.6.1.4.1.2272.1.4.7.1 | TablercChasFanTable | not-accessible | current | This table contains information about Fans |
| 1.3.6.1.4.1.2272.1.4.7.1.1 | RowrcChasFanEntry | not-accessible | current | Contains information regarding a Fan Unit |
| 1.3.6.1.4.1.2272.1.4.7.1.1.1 | ColumnrcChasFanId | read-only | current | The chassis fan Id. |
| 1.3.6.1.4.1.2272.1.4.7.1.1.2 | ColumnrcChasFanOperStatus | read-only | current | Actual status of the Fan: - unknown(1) - status can not be determined. - up(2) - present and supplying power. - down(3) - present, but failure indicated. |
| 1.3.6.1.4.1.2272.1.4.7.1.1.3 | ColumnrcChasFanAmbientTemperature | read-only | current | Used to indicate the temperature in celsius of the air entering the fan. |
| 1.3.6.1.4.1.2272.1.4.7.1.1.4 | ColumnrcChasFanType | read-only | current | Type of the Fan: - unknown(1) - type can not be determined. - regularSpeed(2) - regular speed fan is present. - highSpeed(3) - high speed fan is present. |
| 1.3.6.1.4.1.2272.1.4.7.1.1.5 | ColumnrcChasFanFlowType | read-only | current | Direction of the Fan Flow: - unknown(1) - Flow can not be determined. - fronttoback(2) - Front to back flow. - backtofront(3) - Back to front flow. |
| 1.3.6.1.4.1.2272.1.4.7.2 | TablercChasFanZoneTable | not-accessible | current | Table for the zones available on the chassis |
| 1.3.6.1.4.1.2272.1.4.7.2.1 | RowrcChasFanZoneEntry | not-accessible | current | Contains information regarding a zone unit |
| 1.3.6.1.4.1.2272.1.4.7.2.1.1 | ColumnrcChasFanZoneType | not-accessible | current | Type of the fan zone. |
| 1.3.6.1.4.1.2272.1.4.7.2.1.2 | ColumnrcChasFanZoneMode | read-only | current | Functional mode of the fan zone. |
| 1.3.6.1.4.1.2272.1.4.7.2.1.3 | ColumnrcChasFanZoneModeStatus | read-only | current | Bit set indicates the alarm type(s) |
| 1.3.6.1.4.1.2272.1.4.7.2.1.4 | ColumnrcChasFanZoneAlarmTimer | read-only | current | Alarm timer indicates the remaining time before system checks and shutdown module when fan is in the alarm state. Zero means the fan i snot in an alarm state |
| 1.3.6.1.4.1.2272.1.4.7.2.1.5 | ColumnrcChasFanZoneTemperature | read-only | current | Highest temperature measured in celsius degree from all the sensors (inlet and outlet) in the zone |
| 1.3.6.1.4.1.2272.1.4.7.2.1.6 | ColumnrcChasFanZoneTray1LedColor | read-only | current | Led color indicate fans operation status on tray off: Indicates no tray or power off. green: Indicates all fans are operational in a tray. red: Front Zone Tray… |
| 1.3.6.1.4.1.2272.1.4.7.2.1.7 | ColumnrcChasFanZoneTray2LedColor | read-only | current | Led color indicate fans operation status on tray off: Indicates no tray or power off. green: Indicates all fans are operational in a tray. red: Front Zone Tray… |
| 1.3.6.1.4.1.2272.1.4.7.2.1.8 | ColumnrcChasFanZoneFPGATemperature | read-only | current | Highest FPGA temperature measured in celsius degree from all the FPGA sensors in the zone. FPGA sensors are only available on the RoF cards. Hence this is appl… |
| 1.3.6.1.4.1.2272.1.4.7.2.1.9 | ColumnrcChasFanZoneFATemperature | read-only | current | Highest FA temperature measured in celsius degree from all the FA sensors in the zone. FA sensors are only available on the RoF cards. Hence this is applicable… |
| 1.3.6.1.4.1.2272.1.4.7.3 | TablercChasFanInfoTable | not-accessible | current | This table contains information for all the fans on the chassis |
| 1.3.6.1.4.1.2272.1.4.7.3.1 | RowrcChasFanInfoEntry | not-accessible | current | Contains information regarding a fan unit |
| 1.3.6.1.4.1.2272.1.4.7.3.1.1 | ColumnrcChasFanInfoTray | not-accessible | current | Number of trays per zone in chassis |
| 1.3.6.1.4.1.2272.1.4.7.3.1.2 | ColumnrcChasFanInfoFan | not-accessible | current | Number of fans per tray |
| 1.3.6.1.4.1.2272.1.4.7.3.1.3 | ColumnrcChasFanInfoExpectedSpeed | read-only | current | The administrative setting for the fan speed low: Low speed set by software medium: Medium speed set by software high: High speed set by software hardware: Spe… |
| 1.3.6.1.4.1.2272.1.4.7.3.1.4 | ColumnrcChasFanInfoOperSpeed | read-only | current | Actual speed of the fan |
| 1.3.6.1.4.1.2272.1.4.7.3.1.5 | ColumnrcChasFanInfoStatus | read-only | current | The operational status of the fan. Details below: ok(1): Fan operating under normal condition(s) faulty(2): Fan not operating as expected |
| 1.3.6.1.4.1.2272.1.4.8 | NodercChasPowerSupply | |||
| 1.3.6.1.4.1.2272.1.4.8.1 | TablercChasPowerSupplyTable | not-accessible | current | This table contains information about power supplies. |
| 1.3.6.1.4.1.2272.1.4.8.1.1 | RowrcChasPowerSupplyEntry | not-accessible | current | Contains information regarding a power supply unit. |
| 1.3.6.1.4.1.2272.1.4.8.1.1.1 | ColumnrcChasPowerSupplyId | read-only | current | The power supply Id. |
| 1.3.6.1.4.1.2272.1.4.8.1.1.2 | ColumnrcChasPowerSupplyOperStatus | read-only | current | Actual status of the power supply: - unknown(1) - status can not be determined. - empty(2) - power supply not installed. - up(3) - present and supplying power.… |
| 1.3.6.1.4.1.2272.1.4.8.2 | TablercChasPowerSupplyDetailTable | not-accessible | current | This table contains detailed information about power supplies. |
| 1.3.6.1.4.1.2272.1.4.8.2.1 | RowrcChasPowerSupplyDetailEntry | not-accessible | current | Contains detailed info regarding a power supply unit. |
| 1.3.6.1.4.1.2272.1.4.8.2.1.1 | ColumnrcChasPowerSupplyDetailId | read-only | current | The power supply Id. |
| 1.3.6.1.4.1.2272.1.4.8.2.1.2 | ColumnrcChasPowerSupplyDetailType | read-only | current | The power supply type. |
| 1.3.6.1.4.1.2272.1.4.8.2.1.3 | ColumnrcChasPowerSupplyDetailSerialNumber | read-only | current | The power supply serial number. |
| 1.3.6.1.4.1.2272.1.4.8.2.1.4 | ColumnrcChasPowerSupplyDetailHardwareRevision | read-only | current | The hardware revision of the power supply. |
| 1.3.6.1.4.1.2272.1.4.8.2.1.5 | ColumnrcChasPowerSupplyDetailPartNumber | read-only | current | The power supply part number. |
| 1.3.6.1.4.1.2272.1.4.8.2.1.6 | ColumnrcChasPowerSupplyDetailDescription | read-only | current | The detail description of power supply. |
| 1.3.6.1.4.1.2272.1.4.8.2.1.7 | ColumnrcChasPowerSupplyDetailPsePower | read-only | current | The nominal power of the PSE expressed in Watts. |
| 1.3.6.1.4.1.2272.1.4.8.2.1.8 | ColumnrcChasPowerSupplyDetailInputLineVoltage | read-only | current | The power supply Input Line voltage. |
| 1.3.6.1.4.1.2272.1.4.8.2.1.9 | ColumnrcChasPowerSupplyDetailOperLineVoltage | read-only | current | The power supply Line voltage considered for Power Management calculation. |
| 1.3.6.1.4.1.2272.1.4.8.2.1.10 | ColumnrcChasPowerSupplyDetailOutputWatts | read-only | current | The output power of this power supply |
| 1.3.6.1.4.1.2272.1.4.8.2.1.11 | ColumnrcChasPowerSupplyDetailDualAcInput | read-only | current | The dual input power supply has two input AC lines. This Mib defines which of those AC lines are supplying power. For a single input power supply this Mib will… |
| 1.3.6.1.4.1.2272.1.4.8.2.1.12 | ColumnrcChasPowerSupplyFanFlowType | read-only | current | The power supply Fan Flow Type. |
| 1.3.6.1.4.1.2272.1.4.9 | NodercCard | |||
| 1.3.6.1.4.1.2272.1.4.9.1 | TablercCardTable | not-accessible | current | A table that contains information about the cards in this chassis. For those slots that do not contain a physical card, the table may be implemented to contain… |
| 1.3.6.1.4.1.2272.1.4.9.1.1 | RowrcCardEntry | not-accessible | current | Card attributes |
| 1.3.6.1.4.1.2272.1.4.9.1.1.1 | ColumnrcCardIndex | read-only | current | A unique value for each module within the chassis. This value is determined by the chassis slot number where the module is inserted. Valid entries are 1 to the… |
| 1.3.6.1.4.1.2272.1.4.9.1.1.2 | ColumnrcCardType | read-only | current | Used to indicate the card type. The value returned is defined by the description in rc2kCardTable. |
| 1.3.6.1.4.1.2272.1.4.9.1.1.3 | ColumnrcCardSerialNumber | read-only | obsolete | Unique serial number for this card. |
| 1.3.6.1.4.1.2272.1.4.9.1.1.4 | ColumnrcCardHardwareRevision | read-only | obsolete | Hardware Version |
| 1.3.6.1.4.1.2272.1.4.9.1.1.5 | ColumnrcCardAdminStatus | read-write | obsolete | Used to indicate the administrative status of this card |
| 1.3.6.1.4.1.2272.1.4.9.1.1.6 | ColumnrcCardOperStatus | read-only | obsolete | Used to indicate the operational status of this card. |
| 1.3.6.1.4.1.2272.1.4.9.1.1.7 | ColumnrcCardPCMCIAType | read-only | obsolete | Used to indicate the type of PCMCIA card currently installed in this CPU card, if any. For non-CPU cards, this variable has no meaning and will always be set t… |
| 1.3.6.1.4.1.2272.1.4.9.1.1.8 | ColumnrcCardPartNumber | read-only | obsolete | Card Part Number |
| 1.3.6.1.4.1.2272.1.4.9.1.1.9 | ColumnrcCardOxateCpld | read-only | current | Oxate CPLD version for CP card |
| 1.3.6.1.4.1.2272.1.4.9.1.1.10 | ColumnrcCardOxideFpga | read-only | current | Oxide FGPA version for CP card |
| 1.3.6.1.4.1.2272.1.4.9.1.1.11 | ColumnrcCardCatskillFpga | read-only | current | Catskill FPGA version for CP card |
| 1.3.6.1.4.1.2272.1.4.9.1.1.12 | ColumnrcCardQE | read-only | current | QE version for CP card |
| 1.3.6.1.4.1.2272.1.4.9.1.1.13 | ColumnrcCardK2Fpga | read-only | current | K2 FPGA version for IO card |
| 1.3.6.1.4.1.2272.1.4.9.1.1.14 | ColumnrcCardIoDateDC | read-only | current | IO Date DC CPLD for IO card |
| 1.3.6.1.4.1.2272.1.4.9.1.1.15 | ColumnrcCardIoDateBB | read-only | current | IO Date BaseBoard CPLD for IO card |
| 1.3.6.1.4.1.2272.1.4.9.1.1.16 | ColumnrcCardIoPimCpld | read-only | current | IO PIM CPLD for IO card |
| 1.3.6.1.4.1.2272.1.4.9.1.1.17 | ColumnrcCardLed0Cpld | read-only | current | LED0 CPLD for IO card |
| 1.3.6.1.4.1.2272.1.4.9.1.1.18 | ColumnrcCardLed1Cpld | read-only | current | LED1 CPLD for IO card |
| 1.3.6.1.4.1.2272.1.4.9.1.1.19 | ColumnrcCardZagrosFpga | read-only | current | Zagros FPGA for IO card |
| 1.3.6.1.4.1.2272.1.4.9.1.1.20 | ColumnrcCardRsp | read-only | current | RSP for IO card |
| 1.3.6.1.4.1.2272.1.4.9.1.1.21 | ColumnrcCardBcmMac | read-only | current | BCM Mac for IO card |
| 1.3.6.1.4.1.2272.1.4.9.1.1.22 | ColumnrcCardPhosphideFpga | read-only | current | Phosphide FPGA for IO card |
| 1.3.6.1.4.1.2272.1.4.9.1.1.23 | ColumnrcCardSulfideFpga | read-only | current | Sulfide FPGA for IO card |
| 1.3.6.1.4.1.2272.1.4.9.1.1.24 | ColumnrcCardFluorateCpld | read-only | current | Fluorate Cpld for SF card |
| 1.3.6.1.4.1.2272.1.4.9.1.1.25 | ColumnrcCardBme | read-only | current | BME for SF card |
| 1.3.6.1.4.1.2272.1.4.10 | NodercPort | |||
| 1.3.6.1.4.1.2272.1.4.10.1 | TablercPortTable | not-accessible | current | Port table |
| 1.3.6.1.4.1.2272.1.4.10.1.1 | RowrcPortEntry | not-accessible | current | Entry containing info. for a particular port |
| 1.3.6.1.4.1.2272.1.4.10.1.1.1 | ColumnrcPortIndex | read-only | current | An index value that uniquely identifies a port. This value is similar to ifIndex in MIB2. |
| 1.3.6.1.4.1.2272.1.4.10.1.1.2 | ColumnrcPortType | read-only | current | Port type |
| 1.3.6.1.4.1.2272.1.4.10.1.1.3 | ColumnrcPortConnectorType | read-only | current | Type of connector installed on this port. |
| 1.3.6.1.4.1.2272.1.4.10.1.1.4 | ColumnrcPortPerformRouting | read-write | obsolete | Indicate whether this port should perform routing |
| 1.3.6.1.4.1.2272.1.4.10.1.1.5 | ColumnrcPortHighPriority | read-write | obsolete | Indicate whether this port should be treated with high priority |
| 1.3.6.1.4.1.2272.1.4.10.1.1.6 | ColumnrcPortAction | read-write | current | Port related actions. |
| 1.3.6.1.4.1.2272.1.4.10.1.1.7 | ColumnrcPortResult | read-only | current | Result from the last Vlan action. |
| 1.3.6.1.4.1.2272.1.4.10.1.1.8 | ColumnrcPortPrimaryConnector | read-write | current | For ports configured with redundant connectors, this value is used to indicate which connector should be used as the 'active' connector on this port the next t… |
| 1.3.6.1.4.1.2272.1.4.10.1.1.9 | ColumnrcPortActiveConnector | read-only | current | For ports configured with redundant connectors, this value is used to indicate which connector is currently the active one. Only one connector can be active an… |
| 1.3.6.1.4.1.2272.1.4.10.1.1.10 | ColumnrcPortBackupConnectorStatus | read-only | current | Indicate the status of the link attached to the back-up (non-active) connector. |
| 1.3.6.1.4.1.2272.1.4.10.1.1.11 | ColumnrcPortAutoNegotiate | read-write | current | Indicate whether this port enabled for auto negotiations or not. |
| 1.3.6.1.4.1.2272.1.4.10.1.1.12 | ColumnrcPortAdminDuplex | read-write | current | Indicates the port duplex type |
| 1.3.6.1.4.1.2272.1.4.10.1.1.13 | ColumnrcPortOperDuplex | read-only | current | Indicate this port's current duplex value. |
| 1.3.6.1.4.1.2272.1.4.10.1.1.14 | ColumnrcPortAdminSpeed | read-write | current | Indicate this port's speed. |
| 1.3.6.1.4.1.2272.1.4.10.1.1.15 | ColumnrcPortOperSpeed | read-only | current | Indicate this port's current speed value. |
| 1.3.6.1.4.1.2272.1.4.10.1.1.16 | ColumnrcPortMltId | read-only | current | Indicate which multi-link trunk (MLT) this port is assigned to. If this port is not associated with any MLT, this value will be set to zero(0). |
| 1.3.6.1.4.1.2272.1.4.10.1.1.17 | ColumnrcPortLocked | read-only | current | Indicate whether this port is locked. |
| 1.3.6.1.4.1.2272.1.4.10.1.1.18 | ColumnrcPortAutoNegotiationSupported | read-only | current | Indicate whether this port can support auto-negotiation. |
| 1.3.6.1.4.1.2272.1.4.10.1.1.19 | ColumnrcPortSingleRoutablePort | read-only | current | Indicate whether this port is a single routable port. If this value is true, the port functions like a traditional router port. |
| 1.3.6.1.4.1.2272.1.4.10.1.1.20 | ColumnrcPortUnknownMacDiscard | read-write | current | If rcUnknownMacDiscard is set to True, then a packet with an unknown source MAC address is dropped on that port, and other ports then will discard any packets … |
| 1.3.6.1.4.1.2272.1.4.10.1.1.21 | ColumnrcPortNumStateTransition | read-only | current | # state transitions. |
| 1.3.6.1.4.1.2272.1.4.10.1.1.22 | ColumnrcPortUserPriority | read-write | obsolete | User priority level. |
| 1.3.6.1.4.1.2272.1.4.10.1.1.23 | ColumnrcPortAllowOversizeFrame | read-write | obsolete | Used to specify whether over-size frames should be processed or dropped. |
| 1.3.6.1.4.1.2272.1.4.10.1.1.30 | ColumnrcPortQosLevel | read-write | current | Used to specify the Qos level packets, carried on this port, should be processed with. |
| 1.3.6.1.4.1.2272.1.4.10.1.1.31 | ColumnrcPortDiffServEnable | read-write | current | Used to enable/disable the Differentiated Service feature on this port. |
| 1.3.6.1.4.1.2272.1.4.10.1.1.32 | ColumnrcPortDiffServType | read-write | current | Used to specify the Differentiated Service type for this port. |
| 1.3.6.1.4.1.2272.1.4.10.1.1.33 | ColumnrcPortDiffServIeee8021POverrideEnable | read-write | obsolete | Used to enable/disable the Differentiated Service IEEE 802.1P over-ride feature. |
| 1.3.6.1.4.1.2272.1.4.10.1.1.34 | ColumnrcPortVendorDescr | read-only | current | Used to show the name of the vendor of this port's connector. Only applicable to ports on a GBIC cards. |
| 1.3.6.1.4.1.2272.1.4.10.1.1.35 | ColumnrcPortName | read-write | current | This port's name. |
| 1.3.6.1.4.1.2272.1.4.10.1.1.36 | ColumnrcPortOctapidId | read-only | current | The octapid id of the mirrored port. |
| 1.3.6.1.4.1.2272.1.4.10.1.1.37 | ColumnrcPortWan | read-write | current | Indicatie this port's current WAN/LAN mode. Valid for 10 GE only |
| 1.3.6.1.4.1.2272.1.4.10.1.1.38 | ColumnrcPortTransport | read-write | current | Indicatie this port's current tranport layer. Valid for 10 GE only |
| 1.3.6.1.4.1.2272.1.4.10.1.1.39 | ColumnrcPortMultimediaFilterEnable | read-write | current | Used to enable/disable the Telephony device selected on this port |
| 1.3.6.1.4.1.2272.1.4.10.1.1.40 | ColumnrcPortMultimediaDevSelection | read-write | current | Used to set/get the selected Multimedia & Telephony Devices on this port. The String is the name of the device in the rcIpFilterMediaDevTable |
| 1.3.6.1.4.1.2272.1.4.10.1.1.41 | ColumnrcPortServiceType | read-write | current | Indicates the port functionality. 12uni is used to configure the port to be part of Martini service, tls is used to configure the port to be part of Any2Any VP… |
| 1.3.6.1.4.1.2272.1.4.10.1.1.42 | ColumnrcPortMode | read-write | current | The port mode for l2uni service type.If the port is configured for l2uni service type, then the mode can be transparent or switched. |
| 1.3.6.1.4.1.2272.1.4.10.1.1.43 | ColumnrcPortAdminRouting | read-write | current | Indicate whether the port is routable. |
| 1.3.6.1.4.1.2272.1.4.10.1.1.44 | ColumnrcPortOperRouting | read-only | current | The status of the port whether is routable. |
| 1.3.6.1.4.1.2272.1.4.10.1.1.45 | ColumnrcPortPid | read-only | current | The pid of the mirrored port. |
| 1.3.6.1.4.1.2272.1.4.10.1.1.46 | ColumnrcPortIeee8021POverrideEnable | read-write | current | Used to enable/disable IEEE 802.1P override. If it is enabled, 802.1p value from a tagged frame may not be honored. |
| 1.3.6.1.4.1.2272.1.4.10.1.1.47 | ColumnrcPortShaperEnable | read-write | current | Used to enable/disable shaper on the port. |
| 1.3.6.1.4.1.2272.1.4.10.1.1.48 | ColumnrcPortShaperMaxRate | read-write | current | Shaping rate in mega bits per second. Note that actual shaping rate might be different from the configured rate due to the rate granularity of the shaper. |
| 1.3.6.1.4.1.2272.1.4.10.1.1.49 | ColumnrcPortShaperBurstSize | read-write | current | Burst size in kilo bytes per second. Note that actual burst size might be different from the configured size due to the granularity of the shaper. |
| 1.3.6.1.4.1.2272.1.4.10.1.1.50 | ColumnrcPortCpLimitShutDown | read-only | current | A TRUE value indicates if CP Limit shut down the interface. |
| 1.3.6.1.4.1.2272.1.4.10.1.1.51 | ColumnrcPortHighSecureEnable | read-write | current | Enable/Disable high secure feature. |
| 1.3.6.1.4.1.2272.1.4.10.1.1.52 | ColumnrcPortTlsPriorityOverride | read-write | current | Enable/Disable tls port priority override feature. |
| 1.3.6.1.4.1.2272.1.4.10.1.1.53 | ColumnrcPortVctAbility | read-only | current | If this object is TRUE, then the specified port is hardware-capable of doing the VCT test, if the rcPortAdminStatus is also true. If this object is FALSE, then… |
| 1.3.6.1.4.1.2272.1.4.10.1.1.54 | ColumnrcPortVctAdminStatus | read-write | current | Admin status for port VCT test. If this object is set to TRUE, then the VCT test can be performed. If it is set to FALSE, then the test cannot be performed, ev… |
| 1.3.6.1.4.1.2272.1.4.10.1.1.55 | ColumnrcPortMrouteStrLimit | read-write | current | maximum number of multicast streams that are allowed to ingress to CPU through this port. |
| 1.3.6.1.4.1.2272.1.4.10.1.1.56 | ColumnrcPortMrouteStrTimerCheck | read-write | current | sampling period to check number of multicast streams that has ingressed CPU through this port in seconds. |
| 1.3.6.1.4.1.2272.1.4.10.1.1.57 | ColumnrcPortMrouteStrLimitEnable | read-write | current | enable or disable mroute stream limit on port. |
| 1.3.6.1.4.1.2272.1.4.10.1.1.58 | ColumnrcPortUpdateDynamicMacQosLevel | read-write | current | It is used to indicate whether to update qos level for dynamic learned mac add resses associated with a port-based vlan when port qos level changes. If it is s… |
| 1.3.6.1.4.1.2272.1.4.10.1.1.59 | ColumnrcPortVplsDualHoming | read-write | current | The VPLS dual homing is for VPLS service type only. It can be disable, firstNNI or secondNNI. |
| 1.3.6.1.4.1.2272.1.4.10.1.1.60 | ColumnrcPortVplsMgmtVlan | read-write | current | Management Vlan is configured on this port |
| 1.3.6.1.4.1.2272.1.4.10.1.1.61 | ColumnrcPortTlsManagedBySp | read-write | current | True/False tls devices on port Managed By Service Provider. |
| 1.3.6.1.4.1.2272.1.4.10.1.1.62 | ColumnrcPortAutoNegAd | read-write | current | This object is used to specify the port speed and duplex abilities to be advertised during link negotiation. bit 0 - 10 half duplex advertised bit 1 - 10 full … |
| 1.3.6.1.4.1.2272.1.4.10.1.1.63 | ColumnrcPortAutoNegAdCapability | read-only | current | This object indicates the port speed and duplex capabilities that hardware can actually support on a port, and which may be advertised by the port using auto-n… |
| 1.3.6.1.4.1.2272.1.4.10.1.1.64 | ColumnrcPortAutoRecoverPort | read-write | current | enable or disable auto recovery of port from action taken by cp-limit, link flap or loop detect features |
| 1.3.6.1.4.1.2272.1.4.10.1.1.65 | ColumnrcPortExtCplimitConf | read-write | current | Indicates the port configuration for extended CP-LIMIT |
| 1.3.6.1.4.1.2272.1.4.10.1.1.66 | ColumnrcPortExtCplimitUtilRate | read-write | current | Threshold for Ingress traffic utilization rate of the port for extended CP-LIMIT |
| 1.3.6.1.4.1.2272.1.4.10.1.1.67 | ColumnrcPortEgressRateLimit | read-write | current | Egress Rate Limit. Different platform has different valid range. For VOSS product, Valid range is 1000..100000000, 0 means disabled. The maximum value is based… |
| 1.3.6.1.4.1.2272.1.4.10.1.1.68 | ColumnrcPortEgressRateLimitState | read-write | current | Used to enable/disable shape/egress-rate-limit functionality. WHen it is disabled, rcPortEgressRateLimit will be set to 0 |
| 1.3.6.1.4.1.2272.1.4.10.1.1.69 | ColumnrcPortBpduFilteringTimerCount | read-only | obsolete | The remaining time the port will be disabled due to a BPDU received when BPDU filtering is enabled. |
| 1.3.6.1.4.1.2272.1.4.10.1.1.70 | ColumnrcPortBpduFilteringTimeout | read-write | obsolete | The time the port will be disabled when a BPDU is received when BPDU filtering is enabled. |
| 1.3.6.1.4.1.2272.1.4.10.1.1.71 | ColumnrcPortBpduFilteringAdminEnabled | read-write | obsolete | Used to enable/disable BPDU filtering. |
| 1.3.6.1.4.1.2272.1.4.10.1.1.72 | ColumnrcPortBpduFilteringOperEnabled | read-only | obsolete | Indicates whether BPDU filtering is actually enabled or disabled. |
| 1.3.6.1.4.1.2272.1.4.10.1.1.73 | ColumnrcPortQinqEtherType | read-write | current | The qinq ether type value. It is hex value. It should be displayed and input as Hex value. It is only be used when port is associated with QnQ service UNI. Oth… |
| 1.3.6.1.4.1.2272.1.4.10.1.1.74 | ColumnrcPortTrustDscp | read-write | current | Used to enable/disable the trusted DSCP feature. If enabled, the internal qos-level and 802.1p value are derived from the received packet's DSCP value. This MI… |
| 1.3.6.1.4.1.2272.1.4.10.1.1.75 | ColumnrcPortCpLimitEnable | read-write | current | Used to enable/disable the control packet rate limit. Specifies whether or not rate limiting is currently in operation for multicast and broadcast packets for … |
| 1.3.6.1.4.1.2272.1.4.10.1.1.76 | ColumnrcPortCpMulticastLimit | read-write | current | Used to limit Multicast traffic on the specified port. Sets the limit in packets per second. |
| 1.3.6.1.4.1.2272.1.4.10.1.1.77 | ColumnrcPortCpBroadcastLimit | read-write | current | Used to limit Broadcast traffic on the specified port. Sets the limit in packets per second. |
| 1.3.6.1.4.1.2272.1.4.10.1.1.78 | ColumnrcPortSmartAutoNegotiate | read-write | current | This object indicates whether 'smart' autonegotiation is enabled on a port (smart autonegotiation indicates that the port can sense whether its partner has aut… |
| 1.3.6.1.4.1.2272.1.4.10.1.1.79 | ColumnrcPortMepList | read-write | current | List of Meps assigned to this entry. A mep is consist of <md>.<ma>.<mep_id>. Domain Name, Association and Mep Id is separated by '.' A list of mep is consist o… |
| 1.3.6.1.4.1.2272.1.4.10.1.1.80 | ColumnrcPortNumOfMep | read-only | current | Used to indicate the number of Meps is assigned to this entry |
| 1.3.6.1.4.1.2272.1.4.10.1.1.81 | ColumnrcPortAdacStatus | read-write | current | If enabled, the Nortel IP phones connected to the port will be configured in the voice VLAN. |
| 1.3.6.1.4.1.2272.1.4.10.1.1.82 | ColumnrcPortPvid | read-write | current | A port Vlan Id associates with ESM and RModule port for OEL2/MIM traffic |
| 1.3.6.1.4.1.2272.1.4.10.1.1.83 | ColumnrcPortTdp | read-write | current | This attribute allows to Enable/Disable Transparent Domain Protocol at the port level on the ESM and Power Ranger Card. For the TDP packet to go out on the por… |
| 1.3.6.1.4.1.2272.1.4.10.1.1.84 | ColumnrcPortClockSource | read-write | current | Indicates this port's current WAN clock source. Valid for 10 GE WAN only |
| 1.3.6.1.4.1.2272.1.4.10.1.1.85 | ColumnrcPortIngressRateLimit | read-write | current | Limits the amount of traffic from this Ingress port. Value of qos if-rate-limite setting |
| 1.3.6.1.4.1.2272.1.4.10.1.1.86 | ColumnrcPortIngressRateLimitState | read-write | current | Used to enable/disable police/ingress-rate-limit functionality. |
| 1.3.6.1.4.1.2272.1.4.10.1.1.87 | ColumnrcPortVrfIdList | read-only | current | The set of VRF ids to which this port belongs. |
| 1.3.6.1.4.1.2272.1.4.10.1.1.88 | ColumnrcPortCfmVid | read-write | current | CFM default port vid |
| 1.3.6.1.4.1.2272.1.4.10.1.1.89 | ColumnrcPortUserLabel1 | read-write | current | User provided field. Used to give extra management information/data |
| 1.3.6.1.4.1.2272.1.4.10.1.1.90 | ColumnrcPortUserLabel2 | read-write | current | User provided additional field. Used to give extra management information/data |
| 1.3.6.1.4.1.2272.1.4.10.1.1.91 | ColumnrcPortClearCfmStats | read-write | current | To clear the port counter |
| 1.3.6.1.4.1.2272.1.4.10.1.1.92 | ColumnrcPortInterfaceType | read-write | current | This value indicates whether a port is of type <normal/si lent/uni>. A port can be included in any EVPN service only if this attribute is set to uni. If the po… |
| 1.3.6.1.4.1.2272.1.4.10.1.1.93 | ColumnrcPortCfmControlMep | read-write | current | MEP assigned for CFM Control. A mep consists of <md>.<ma>.<mep_id>. Domain Name, Association and Mep Id is separated by '.' |
| 1.3.6.1.4.1.2272.1.4.10.1.1.94 | ColumnrcPortMtu | read-write | current | Port Mtu |
| 1.3.6.1.4.1.2272.1.4.10.1.1.95 | ColumnrcPortMtuState | read-write | current | Used to enable/disable Port Mtu functionality. |
| 1.3.6.1.4.1.2272.1.4.10.1.1.96 | ColumnrcPortVrfNameList | read-only | current | The set of VRF names to which this port belongs. |
| 1.3.6.1.4.1.2272.1.4.10.1.1.97 | ColumnrcPortBrouterVrfId | read-write | current | Gives the VRF Id for this Brouter port. |
| 1.3.6.1.4.1.2272.1.4.10.1.1.98 | ColumnrcPortBrouterVrfName | read-only | current | Gives the VRF Name for this Brouter port. |
| 1.3.6.1.4.1.2272.1.4.10.1.1.99 | ColumnrcPortVrfCount | read-only | current | The total number of VRFs this port is associated to. |
| 1.3.6.1.4.1.2272.1.4.10.1.1.100 | ColumnrcPortCtrlPktDropLimitEnable | read-write | current | Used to enable/disable Control Packets Drop Rate Limiter functionality. |
| 1.3.6.1.4.1.2272.1.4.10.1.1.101 | ColumnrcPortCtrlPktDropLimit | read-write | current | Indicates the Control Packet drop rate limit value |
| 1.3.6.1.4.1.2272.1.4.10.1.1.102 | ColumnrcPortCtrlPktShutdownLimitEnable | read-write | current | Used to enable/disable Control Packets Shutdown Rate Limiter functionality. |
| 1.3.6.1.4.1.2272.1.4.10.1.1.103 | ColumnrcPortCtrlPktShutdownLimit | read-write | current | Indicates the Control Packet shutdown rate Limit value |
| 1.3.6.1.4.1.2272.1.4.10.1.1.104 | ColumnrcPortCtrlPktShutdownRtExceeded | read-write | current | Indicates if the Shutdown rate has been exceeded on the port |
| 1.3.6.1.4.1.2272.1.4.10.1.1.105 | ColumnrcPortCtrlPktDropRtExceeded | read-write | current | Indicates if the Drop rate has been exceeded on the port |
| 1.3.6.1.4.1.2272.1.4.10.1.1.106 | ColumnrcPortDhcpOption82SubscriberId | read-write | current | This object contains the DHCP option 82 subscriber ID string to be used in sub-option 6. If the value is an empty string, then sub-option 6 is not included in … |
| 1.3.6.1.4.1.2272.1.4.10.1.1.107 | ColumnrcPortServiceCardType | read-only | current | Port Hardware type, which includes PowerRanger, ESM port and other |
| 1.3.6.1.4.1.2272.1.4.10.1.1.108 | ColumnrcPortIngressRatePeak | read-write | current | Peak rate limit for this port. 0 means disable |
| 1.3.6.1.4.1.2272.1.4.10.1.1.109 | ColumnrcPortIngressRateSvc | read-write | current | Service rate limit for this port. 0 mean disable |
| 1.3.6.1.4.1.2272.1.4.10.1.1.110 | ColumnrcPortCpLimitPktRate | read-write | current | Used to limit Control packets on the port to qos-levels 6 and 7. Sets the limit in packets per second. |
| 1.3.6.1.4.1.2272.1.4.10.1.1.111 | ColumnrcPortCpLimitShutDownEnable | read-write | current | Used to indicate if the port should be shutdown when the CpLimitPktRate is exceeded. |
| 1.3.6.1.4.1.2272.1.4.10.1.1.112 | ColumnrcPortRmonEnable | read-write | current | Used to set Remote Monitoring enable/disable |
| 1.3.6.1.4.1.2272.1.4.10.1.1.113 | ColumnrcPortIpsecEnable | read-write | deprecated | Used to set IPSEC enable/disable. at place of this value use RcIpConfEntry for IPV4 and use RcIpv6InterfaceEntry for IPV6. This field changed to deprecated |
| 1.3.6.1.4.1.2272.1.4.10.1.1.114 | ColumnrcPortShutdownReason | read-only | current | The port shutdown can happen due to many reason. It indicates the reason for the port state change. |
| 1.3.6.1.4.1.2272.1.4.10.1.1.115 | ColumnrcPortMdixMode | read-write | current | Defines the MDI crossover (MDIX) modes for the port |
| 1.3.6.1.4.1.2272.1.4.10.1.1.116 | ColumnrcPortFlexUniEnable | read-write | current | Used to set FLEX UNI enable/disable on port |
| 1.3.6.1.4.1.2272.1.4.10.1.1.117 | ColumnrcPortBpduGuardTimerCount | read-only | current | The remaining time the port will be disabled due to a BPDU received when BPDU guard is enabled. |
| 1.3.6.1.4.1.2272.1.4.10.1.1.118 | ColumnrcPortBpduGuardTimeout | read-write | current | The time the port will be disabled when a BPDU is received when BPDU Guard is enabled. |
| 1.3.6.1.4.1.2272.1.4.10.1.1.119 | ColumnrcPortBpduGuardAdminEnabled | read-write | current | Used to enable/disable BPDU guard. |
| 1.3.6.1.4.1.2272.1.4.10.1.1.120 | ColumnrcPortLicenseControlStatus | read-only | current | This object show the license conrol status of a port. It is only applicable to a port which reuqires PORT license file to be adminstratively enabled (ifAdminSt… |
| 1.3.6.1.4.1.2272.1.4.10.1.1.121 | ColumnrcPortTxFlowControl | read-write | current | Used to enable/disable Tx flow control. |
| 1.3.6.1.4.1.2272.1.4.10.1.1.122 | ColumnrcPortTxFlowControlOperState | read-only | current | Used to indicate the Tx flow control operational state. |
| 1.3.6.1.4.1.2272.1.4.10.2 | TablercPortPcapTable | not-accessible | current | Port pcap Table |
| 1.3.6.1.4.1.2272.1.4.10.2.1 | RowrcPortPcapEntry | not-accessible | current | Entry containing pcap info. for a particular port |
| 1.3.6.1.4.1.2272.1.4.10.2.1.1 | ColumnrcPortPcapIndex | read-only | current | An index value that uniquely identifies a port. This value is similar to ifIndex in MIB2. |
| 1.3.6.1.4.1.2272.1.4.10.2.1.2 | ColumnrcPortPcapEnable | read-write | current | To enable pcap for the port |
| 1.3.6.1.4.1.2272.1.4.10.2.1.3 | ColumnrcPortPcapMode | read-write | current | Mode in which pcap is enabled |
| 1.3.6.1.4.1.2272.1.4.10.2.1.4 | ColumnrcPortPcapFilterListSize | read-only | current | Used to indicate the number of filter list(s) that are assigned to this port. |
| 1.3.6.1.4.1.2272.1.4.10.2.1.5 | ColumnrcPortPcapFilterList | read-write | current | Used to indicate zero or more filter lists that are associated with this port for pcap. Each filter list identifier is stored as two bytes in this array starti… |
| 1.3.6.1.4.1.2272.1.4.10.2.1.6 | ColumnrcPortPcapAclFilterListSize | read-only | current | Used to indicate the number of ACL filter(s) that are assigned to this port which has mirror set as global-action. |
| 1.3.6.1.4.1.2272.1.4.10.2.1.7 | ColumnrcPortPcapAclFilterList | read-write | current | Used to indicate zero or more ACL filter lists that are associated with this port for pcap (has mirror set as global-action). Each ACL filter list identifier i… |
| 1.3.6.1.4.1.2272.1.4.10.3 | NodercPortPoe | |||
| 1.3.6.1.4.1.2272.1.4.10.3.1 | TablercPortPoePseIndexTable | not-accessible | current | Port table |
| 1.3.6.1.4.1.2272.1.4.10.3.1.1 | RowrcPortPoePseIndexEntry | not-accessible | current | Entry containing info. for a particular port |
| 1.3.6.1.4.1.2272.1.4.10.3.1.1.1 | ColumnrcPortPoePseIndexIfIndex | read-only | current | An index value that uniquely identifies an interface to a PSE port device. The interface identified by a particular value of this index is the same interface a… |
| 1.3.6.1.4.1.2272.1.4.10.3.1.1.2 | ColumnrcPortPoePseIndexGroupIndex | read-only | current | An index value that uniquely identifies the group containing the port to which a power Etherenet PSE is connected. Group means box in the stack, module in a ra… |
| 1.3.6.1.4.1.2272.1.4.10.3.1.1.3 | ColumnrcPortPoePseIndexPortIndex | read-only | current | This variable uniquely identifies the power Ethernet PSE port within group rcPoePseGroupIndex to which the power Ethernet PSE entry is connected. |
| 1.3.6.1.4.1.2272.1.4.10.3.2 | TablercPortPoeMainPseExtnTable | not-accessible | current | Port table |
| 1.3.6.1.4.1.2272.1.4.10.3.2.1 | RowrcPortPoeMainPseExtnEntry | not-accessible | current | Entry containing info. for a particular port |
| 1.3.6.1.4.1.2272.1.4.10.3.2.1.1 | ColumnrcPortPoeMainPseExtnGroupIndex | read-only | current | An index value that uniquely identifies an interface to a PSE port device. The interface identified by a particular value of this index is the same interface a… |
| 1.3.6.1.4.1.2272.1.4.10.3.2.1.2 | ColumnrcPortPoeMainPseExtnPwrAdmin | read-write | current | An index value that uniquely identifies the group containing the port to which a power Etherenet PSE is connected. Group means box in the stack, module in a ra… |
| 1.3.6.1.4.1.2272.1.4.10.3.2.1.3 | ColumnrcPortPoeMainPseExtnPwrPriority | read-write | current | An index value that uniquely identifies the group containing the port to which a power Etherenet PSE is connected. Group means box in the stack, module in a ra… |
| 1.3.6.1.4.1.2272.1.4.10.3.2.1.4 | ColumnrcPortPoeMainPseExtnDeviceDetectType | read-write | current | An index value that uniquely identifies the group containing the port to which a power Etherenet PSE is connected. Group means box in the stack, module in a ra… |
| 1.3.6.1.4.1.2272.1.4.10.3.2.1.5 | ColumnrcPortPoeMainPseExtnPwrLimit | read-write | current | The maximum available PoE power of the main PSE expressed in Watts. |
| 1.3.6.1.4.1.2272.1.4.10.3.3 | TablercPortPoePsePortExtnTable | not-accessible | current | Port table |
| 1.3.6.1.4.1.2272.1.4.10.3.3.1 | RowrcPortPoePsePortExtnEntry | not-accessible | current | Entry containing info. for a particular port |
| 1.3.6.1.4.1.2272.1.4.10.3.3.1.1 | ColumnrcPortPoePsePortExtnGroupIndex | read-only | current | An index value that uniquely identifies an interface to a PSE port device. The interface identified by a particular value of this index is the same interface a… |
| 1.3.6.1.4.1.2272.1.4.10.3.3.1.2 | ColumnrcPortPoePsePortExtnPortIndex | read-only | current | An index value that uniquely identifies an interface to a PSE port device. The interface identified by a particular value of this index is the same interface a… |
| 1.3.6.1.4.1.2272.1.4.10.3.3.1.3 | ColumnrcPortPoePsePortExtnPwrLimit | read-write | current | An index value that uniquely identifies the group containing the port to which a power Etherenet PSE is connected. Group means box in the stack, module in a ra… |
| 1.3.6.1.4.1.2272.1.4.10.3.3.1.4 | ColumnrcPortPoePsePortExtnMeasuredVolt | read-only | current | An index value that uniquely identifies the group containing the port to which a power Etherenet PSE is connected. Group means box in the stack, module in a ra… |
| 1.3.6.1.4.1.2272.1.4.10.3.3.1.5 | ColumnrcPortPoePsePortExtnMeasuredCurrent | read-only | current | An index value that uniquely identifies the group containing the port to which a power Etherenet PSE is connected. Group means box in the stack, module in a ra… |
| 1.3.6.1.4.1.2272.1.4.10.3.3.1.6 | ColumnrcPortPoePsePortExtnPwrConsumpt | read-only | current | An index value that uniquely identifies the group containing the port to which a power Etherenet PSE is connected. Group means box in the stack, module in a ra… |
| 1.3.6.1.4.1.2272.1.4.10.4 | TablercPortLacpTable | not-accessible | current | Port LACP table |
| 1.3.6.1.4.1.2272.1.4.10.4.1 | RowrcPortLacpEntry | not-accessible | current | Entry containing info. for a particular port |
| 1.3.6.1.4.1.2272.1.4.10.4.1.1 | ColumnrcPortLacpAdminEnable | read-write | current | Administratively enable/disable LACP on a port |
| 1.3.6.1.4.1.2272.1.4.10.4.1.2 | ColumnrcPortLacpOperEnable | read-only | current | Indicates if LACP is operationally enabled or disabled on a port |
| 1.3.6.1.4.1.2272.1.4.10.4.1.3 | ColumnrcPortLacpFastPeriodicTime | read-write | current | The number of miliseconds between periodic transmissions using Short Timeouts. |
| 1.3.6.1.4.1.2272.1.4.10.4.1.4 | ColumnrcPortLacpSlowPeriodicTime | read-write | current | The number of miliseconds between periodic transmissions using LONG Timeouts. |
| 1.3.6.1.4.1.2272.1.4.10.4.1.5 | ColumnrcPortLacpTimeoutScale | read-write | current | Scalar value used to calculate timeout time from periodic time. Timeout = PeriodicTime * TimeoutScale |
| 1.3.6.1.4.1.2272.1.4.10.4.1.6 | ColumnrcPortLacpAggrWaitTime | read-write | current | The number of mili seconds to delay aggregation to allow multiple links to aggregate simultaneously. |
| 1.3.6.1.4.1.2272.1.4.10.4.1.7 | ColumnrcPortLacpFastPeriodicTimeOper | read-only | current | The operating value of fast periodic timer on the port. |
| 1.3.6.1.4.1.2272.1.4.10.4.1.8 | ColumnrcPortLacpSlowPeriodicTimeOper | read-only | current | The operating value of slow periodic timer on the port. |
| 1.3.6.1.4.1.2272.1.4.10.4.1.9 | ColumnrcPortLacpTimeoutScaleOper | read-only | current | The operating value of timeout scale on the port. |
| 1.3.6.1.4.1.2272.1.4.10.4.1.10 | ColumnrcPortLacpAggrWaitTimeOper | read-only | current | The operating value of aggreagate wait time on port. |
| 1.3.6.1.4.1.2272.1.4.10.4.1.11 | ColumnrcPortLacpSuppressMisConfigLog | read-write | current | Enable/Disable Suppression of misconfiguration logs. |
| 1.3.6.1.4.1.2272.1.4.10.5 | TablercPortVLacpTable | not-accessible | current | Port Virtual LACP table |
| 1.3.6.1.4.1.2272.1.4.10.5.1 | RowrcPortVLacpEntry | not-accessible | current | Entry containing info. for a particular port |
| 1.3.6.1.4.1.2272.1.4.10.5.1.1 | ColumnrcPortVLacpAdminEnable | read-write | current | Administratively enable/disable Virtual LACP on a port |
| 1.3.6.1.4.1.2272.1.4.10.5.1.2 | ColumnrcPortVLacpOperEnable | read-only | current | Indicates if Virtual LACP is operationally enabled or disabled on a port |
| 1.3.6.1.4.1.2272.1.4.10.5.1.3 | ColumnrcPortVLacpFastPeriodicTimer | read-write | current | The number of miliseconds between periodic transmissions using Short Timeouts |
| 1.3.6.1.4.1.2272.1.4.10.5.1.4 | ColumnrcPortVLacpSlowPeriodicTimer | read-write | current | The number of miliseconds between periodic transmissions using LONG Timeouts. |
| 1.3.6.1.4.1.2272.1.4.10.5.1.5 | ColumnrcPortVLacpTimeout | read-write | current | Timeout control value. Long or Short Timeout |
| 1.3.6.1.4.1.2272.1.4.10.5.1.6 | ColumnrcPortVLacpTimeoutScale | read-write | current | Scalar value used to calculate timeout time from periodic time. Timeout = PeriodicTime * TimeoutScale |
| 1.3.6.1.4.1.2272.1.4.10.5.1.7 | ColumnrcPortVLacpEtherType | read-write | current | VLACP Protocol Identification. The id value is in Hex. Range in hex (0x600..0xffff) |
| 1.3.6.1.4.1.2272.1.4.10.5.1.8 | ColumnrcPortVLacpEtherMacAddress | read-write | current | Multicast Mac Address exclusively used for VLACPDU's |
| 1.3.6.1.4.1.2272.1.4.10.5.1.9 | ColumnrcPortVLacpPortState | read-only | current | Display the Vlacp Port State. |
| 1.3.6.1.4.1.2272.1.4.10.5.1.10 | ColumnrcPortVLacpDualHomingEnable | read-write | current | Enable/Disable Dual homing on Virtual LACP on a port |
| 1.3.6.1.4.1.2272.1.4.10.5.1.11 | ColumnrcPortVLacpFlapDetectEnable | read-write | current | Administratively enable/disable VLACP flap detection on a port |
| 1.3.6.1.4.1.2272.1.4.10.5.1.12 | ColumnrcPortVLacpFlapFrequency | read-write | current | The number of VLACP Flaps on a port, that if they occure within rcPortVLacpFlapInterval seconds, the port is shutdown. |
| 1.3.6.1.4.1.2272.1.4.10.5.1.13 | ColumnrcPortVLacpFlapInterval | read-write | current | The time inteval in seconds within which VLACP flaps on a port are monitored. |
| 1.3.6.1.4.1.2272.1.4.10.5.1.14 | ColumnrcPortVLacpTotalFlapCount | read-only | current | Total Number of VLACP flaps detected on this port since either enabling VLACP or clearing the counter. |
| 1.3.6.1.4.1.2272.1.4.10.5.1.15 | ColumnrcPortVLacpFirstFlapTimeStamp | read-only | current | Timestamp for the first VLACP flap detected on this port since either enabling VLACP or clearing the timer. |
| 1.3.6.1.4.1.2272.1.4.10.5.1.16 | ColumnrcPortVLacpLastFlapTimeStamp | read-only | current | Timestamp for the latest VLACP flap detected on this port since either enabling VLACP or clearing the timer. |
| 1.3.6.1.4.1.2272.1.4.10.5.1.17 | ColumnrcPortVLacpFlapClearStats | read-write | current | Clears all VLACP flap counters and timers. |
| 1.3.6.1.4.1.2272.1.4.10.6 | TablercPortRemoteMirroringTable | not-accessible | current | Port Remote Mirroring Table |
| 1.3.6.1.4.1.2272.1.4.10.6.1 | RowrcPortRemoteMirroringEntry | not-accessible | current | Entry containing remote mirroring info. for a particular port |
| 1.3.6.1.4.1.2272.1.4.10.6.1.1 | ColumnrcPortRemoteMirroringIndex | read-only | current | An index value that uniquely identifies a port. This value is similar to ifIndex in MIB2. |
| 1.3.6.1.4.1.2272.1.4.10.6.1.2 | ColumnrcPortRemoteMirroringEnable | read-write | current | To enable remote Mirroring for the port |
| 1.3.6.1.4.1.2272.1.4.10.6.1.3 | ColumnrcPortRemoteMirroringMode | read-write | current | Mode in which remote mirroring is enabled |
| 1.3.6.1.4.1.2272.1.4.10.6.1.4 | ColumnrcPortRemoteMirroringSrcMac | read-write | current | Source Mac of the remote mirrored packet. Remote mirroring packet will be send with this source mac address |
| 1.3.6.1.4.1.2272.1.4.10.6.1.5 | ColumnrcPortRemoteMirroringDstMac | read-write | current | Destination Mac of the remote mirrored packet. Packets will be bridged to this mac address. Remote mirroring packet will be send to this mac address |
| 1.3.6.1.4.1.2272.1.4.10.6.1.6 | ColumnrcPortRemoteMirroringEtherType | read-write | current | Ethertype of the remote mirrored packet. Packets will be send with this ethertype |
| 1.3.6.1.4.1.2272.1.4.10.6.1.7 | ColumnrcPortRemoteMirroringVlanIdListSize | read-only | current | Used to indicate the number of VLAN IDs that are assigned to this port. |
| 1.3.6.1.4.1.2272.1.4.10.6.1.8 | ColumnrcPortRemoteMirroringVlanIdList | read-write | current | This field is used only if the port is assigned as remote mirroring termination port. Represents zero or more filter lists vlan in which the Destination Mac ad… |
| 1.3.6.1.4.1.2272.1.4.10.6.1.9 | ColumnrcPortRemoteMirroringRowStatus | read-write | current | RowStatus |
| 1.3.6.1.4.1.2272.1.4.10.7 | TablercPortVlacpSessionTable | not-accessible | current | A table used to maintain Vlacp session values. |
| 1.3.6.1.4.1.2272.1.4.10.7.1 | RowrcPortVlacpSessionEntry | not-accessible | current | Entry containing Vlacp Session information regarding a particular port or mlt. |
| 1.3.6.1.4.1.2272.1.4.10.7.1.1 | ColumnrcPortVlacpSessionIfIndex | not-accessible | current | IfIndex of the port or Mlt |
| 1.3.6.1.4.1.2272.1.4.10.7.1.2 | ColumnrcPortVlacpSessionSesNumber | not-accessible | current | Session number of an IfIndex |
| 1.3.6.1.4.1.2272.1.4.10.7.1.3 | ColumnrcPortVlacpSessionSrcMacAddress | read-only | current | Mac Address for the session |
| 1.3.6.1.4.1.2272.1.4.10.7.1.4 | ColumnrcPortVlacpSessionRxTimer | read-only | current | The Rx timer for the session |
| 1.3.6.1.4.1.2272.1.4.10.7.1.5 | ColumnrcPortVlacpSessionValidbit | read-only | current | The valid bit for the session |
| 1.3.6.1.4.1.2272.1.4.10.7.1.6 | ColumnrcPortVlacpSessionInPktCount | read-only | current | The In packet count for the session |
| 1.3.6.1.4.1.2272.1.4.10.8 | TablercPortMgmtLinkTable | not-accessible | current | Port card mgmt port link table |
| 1.3.6.1.4.1.2272.1.4.10.8.1 | RowrcPortMgmtLinkEntry | not-accessible | current | Entry containing info. for a particular mgmt port in I/O card |
| 1.3.6.1.4.1.2272.1.4.10.8.1.1 | ColumnrcPortMgmtLinkIndex | read-only | current | IfIndex of the port. |
| 1.3.6.1.4.1.2272.1.4.10.8.1.2 | ColumnrcPortMgmtLinkDescr | read-only | current | Port description |
| 1.3.6.1.4.1.2272.1.4.10.8.1.3 | ColumnrcPortMgmtLinkOperStatus | read-only | current | admin status of the mgmt port |
| 1.3.6.1.4.1.2272.1.4.10.8.1.4 | ColumnrcPortMgmtLinkAutoNegotiate | read-only | current | Auto-negotiation status of the port |
| 1.3.6.1.4.1.2272.1.4.10.8.1.5 | ColumnrcPortMgmtLinkDuplex | read-only | current | duplex setting for the port |
| 1.3.6.1.4.1.2272.1.4.10.8.1.6 | ColumnrcPortMgmtLinkSpeed | read-only | current | speed setting for this port. |
| 1.3.6.1.4.1.2272.1.4.10.9 | TablercPortFlushFdbTable | not-accessible | current | Port Flush Fdbtable |
| 1.3.6.1.4.1.2272.1.4.10.9.1 | RowrcPortFlushFdbEntry | not-accessible | current | port based deletion of mac addresses learned or discarded on that port |
| 1.3.6.1.4.1.2272.1.4.10.9.1.1 | ColumnrcPortFlushFdbAddress | read-write | current | Mac Address to be deleted. |
| 1.3.6.1.4.1.2272.1.4.10.9.1.2 | ColumnrcPortFlushFdbVlanId | read-write | current | vlan Id associated with the Mac Address |
| 1.3.6.1.4.1.2272.1.4.10.10 | TablercPortRemotePortShutdownTable | not-accessible | current | A list of RemotePortShutdown port info. |
| 1.3.6.1.4.1.2272.1.4.10.10.1 | RowrcPortRemotePortShutdownEntry | not-accessible | current | A RemotePortShutdown table entry. |
| 1.3.6.1.4.1.2272.1.4.10.10.1.1 | ColumnrcPortRemotePortShutdownIfIndex | not-accessible | current | The ifIndex value for a port. |
| 1.3.6.1.4.1.2272.1.4.10.10.1.2 | ColumnrcPortRemotePortShutdownEnabled | read-write | current | This object controls whether the Remote-Port-Shutdown feature is enabled or disabled on a port. |
| 1.3.6.1.4.1.2272.1.4.10.10.1.3 | ColumnrcPortRemotePortShutdownHoldTimer | read-write | current | Indicates the time period after a port has been shutdown during which it will remain down, regardless of any CCMs received during that time period. |
| 1.3.6.1.4.1.2272.1.4.10.10.1.4 | ColumnrcPortRemotePortShutdownStatus | read-only | current | This object indicates whether a port is shutdown by the remote port shutdown feature. |
| 1.3.6.1.4.1.2272.1.4.10.10.1.5 | ColumnrcPortRemotePortShutdownLocalMacAddress | read-only | current | Local MAC address. |
| 1.3.6.1.4.1.2272.1.4.10.10.1.6 | ColumnrcPortRemotePortShutdownRemoteMacAddress | read-only | current | Remote MAC address. |
| 1.3.6.1.4.1.2272.1.4.10.11 | TablercPortFlushMacTable | not-accessible | current | Flush MAC entry on a port. |
| 1.3.6.1.4.1.2272.1.4.10.11.1 | RowrcPortFlushMacEntry | not-accessible | current | Port mac flush table entry. |
| 1.3.6.1.4.1.2272.1.4.10.11.1.1 | ColumnrcPortFlushMacPortNum | not-accessible | current | Port number where the mac record exists. |
| 1.3.6.1.4.1.2272.1.4.10.11.1.2 | ColumnrcPortFlushMacAddr | read-write | current | Mac Address that needs to be removed. |
| 1.3.6.1.4.1.2272.1.4.10.11.1.3 | ColumnrcPortFlushMacVlanId | read-write | current | Vlan Id associated with the Mac Address. |
| 1.3.6.1.4.1.2272.1.4.10.12 | TablercLldpXMedLocMediaPolicyTable | not-accessible | current | This table contains one row per policy type per port of media policy information (as a part of the MED organizational extension) on the local system known to t… |
| 1.3.6.1.4.1.2272.1.4.10.12.1 | RowrcLldpXMedLocMediaPolicyEntry | not-accessible | current | Information about a particular policy on a specific port component. |
| 1.3.6.1.4.1.2272.1.4.10.12.1.1 | ColumnrcLldpXMedLocMediaPolicyPortNum | not-accessible | current | . |
| 1.3.6.1.4.1.2272.1.4.10.12.1.2 | ColumnrcLldpXMedLocMediaPolicyAppType | not-accessible | current | The media type that defines the primary function of the application for the policy advertised by an endpoint. |
| 1.3.6.1.4.1.2272.1.4.10.12.1.3 | ColumnrcLldpXMedLocMediaPolicyVlanID | read-create | current | An extension of the VLAN Identifier for the port, as defined in IEEE 802.1P-1998. A value of 1 through 4094 is used to define a valid PVID. A value of 0 shall … |
| 1.3.6.1.4.1.2272.1.4.10.12.1.4 | ColumnrcLldpXMedLocMediaPolicyPriority | read-create | current | This object contains the value of the 802.1p priority which is associated with the given port on the local system. |
| 1.3.6.1.4.1.2272.1.4.10.12.1.5 | ColumnrcLldpXMedLocMediaPolicyDscp | read-create | current | This object contains the value of the Differentiated Service Code Point (DSCP) as defined in IETF RFC 2474 and RFC 2475 which is associated with the given port… |
| 1.3.6.1.4.1.2272.1.4.10.12.1.6 | ColumnrcLldpXMedLocMediaPolicyUnknown | read-create | current | A value of 'true' indicates that the network policy for the specified application type is currently unknown. In this case, the VLAN ID, the layer 2 priority an… |
| 1.3.6.1.4.1.2272.1.4.10.12.1.7 | ColumnrcLldpXMedLocMediaPolicyTagged | read-create | current | A value of 'true' indicates that the application is using a tagged VLAN. A value of 'false' indicates that for the specific application the device either is us… |
| 1.3.6.1.4.1.2272.1.4.10.12.1.8 | ColumnrcLldpXMedLocMediaPolicyRowStatus | read-create | current | Used to create/delete entries. |
| 1.3.6.1.4.1.2272.1.4.10.13 | TablercPortLosslessEnetTable | not-accessible | current | Port Lossless Ethernet Table |
| 1.3.6.1.4.1.2272.1.4.10.13.1 | RowrcPortLosslessEnetEntry | not-accessible | current | Entry containing lossless Ethernet information for a particular port. |
| 1.3.6.1.4.1.2272.1.4.10.13.1.1 | ColumnrcPortLosslessEnetIndex | not-accessible | current | An index value that uniquely identifies a port. This value is similar to ifIndex in MIB2. Lossless Ethernet will be limited to 10Gig ports. |
| 1.3.6.1.4.1.2272.1.4.10.13.1.2 | ColumnrcPortLosslessEnetConfigured | read-write | current | To enable lossless mode for the port |
| 1.3.6.1.4.1.2272.1.4.10.13.1.3 | ColumnrcPortLosslessEnetPauseType | read-write | current | Pause frame type. fc - Pause, pfc - priority-based flow control. |
| 1.3.6.1.4.1.2272.1.4.10.13.1.4 | ColumnrcPortLosslessEnetPfcBandwidth | read-write | current | Guaranteed bandwidth in Gbps when rcPortLosslessEnetPauseType is set to pfc(2). |
| 1.3.6.1.4.1.2272.1.4.10.14 | TablercChannelizedPortTable | not-accessible | current | Port table for all channelized capable ports. |
| 1.3.6.1.4.1.2272.1.4.10.14.1 | RowrcChannelizedPortEntry | not-accessible | current | Entry containing info for a key port of channelized capable port. |
| 1.3.6.1.4.1.2272.1.4.10.14.1.1 | ColumnrcChannelizedPortIndex | not-accessible | current | An index value that uniquely identifies a port which is channelized capable. |
| 1.3.6.1.4.1.2272.1.4.10.14.1.2 | ColumnrcChannelizedPortChannelType | read-only | current | port channelized type. Either 40G or 100G. |
| 1.3.6.1.4.1.2272.1.4.10.14.1.3 | ColumnrcChannelizedPortAdminMode | read-write | current | Administratively enable/disable the port channelized mode. |
| 1.3.6.1.4.1.2272.1.4.10.15 | TablercPortExtendTable | not-accessible | current | Port extend table. |
| 1.3.6.1.4.1.2272.1.4.10.15.1 | RowrcPortExtendEntry | not-accessible | current | Entry containing info for a key port. |
| 1.3.6.1.4.1.2272.1.4.10.15.1.1 | ColumnrcPortExtendPortDisplayFormat | read-only | current | The port format to display. |
| 1.3.6.1.4.1.2272.1.4.10.16 | TablercPortVlacpStatsTable | not-accessible | current | A table that contains VLACP information about every port that is associated with this device. A row appears in this table for each physical port. |
| 1.3.6.1.4.1.2272.1.4.10.16.1 | RowrcPortVlacpStatsEntry | not-accessible | current | A list of Virtual Link Aggregation Control Protocol statistics for each port on this device. |
| 1.3.6.1.4.1.2272.1.4.10.16.1.1 | ColumnrcPortVlacpIndex | not-accessible | current | The ifIndex of VLACP ports |
| 1.3.6.1.4.1.2272.1.4.10.16.1.2 | ColumnrcPortVlacpStatsLACPDUsRx | read-only | current | The number of valid VLACPDUs received on this Port. This value is read-only. |
| 1.3.6.1.4.1.2272.1.4.10.16.1.3 | ColumnrcPortVlacpStatsLACPDUsTx | read-only | current | The number of VLACPDUs transmitted on this Port. This value is read-only. |
| 1.3.6.1.4.1.2272.1.4.10.16.1.4 | ColumnrcPortVlacpStatsLACPDUsMismatch | read-only | current | The number of mismatched VLACPDUs in terms of seq-num RX'ed on this Port. This value is read-only. |
| 1.3.6.1.4.1.2272.1.4.11 | NodercPortLock | |||
| 1.3.6.1.4.1.2272.1.4.11.1 | ScalarrcPortLockEnable | read-write | current | Indicate whether the port lock feature is enabled. |
| 1.3.6.1.4.1.2272.1.4.11.2 | ScalarrcPortLockLockedPorts | read-write | current | The set of ports that are administratively locked. Locked ports cannot be modified in anyway until the port is unlocked first. |
| 1.3.6.1.4.1.2272.1.4.12 | ScalarrcChasAruMode | read-only | current | The ARU mode the chassis is operating in. |
| 1.3.6.1.4.1.2272.1.4.13 | ScalarrcChasQuidMode | read-only | current | The Quid mode the chassis is operating in. |
| 1.3.6.1.4.1.2272.1.4.14 | ScalarrcChasEocModeAdminStatus | read-write | current | Used to specify the Enforce Operational Configuration Mode(EOC) of the system. When a device is configured with hardware of different revisions, the system wil… |
| 1.3.6.1.4.1.2272.1.4.15 | ScalarrcChasEocModeOperStatus | read-only | current | Used to indicate the Enforce Operational Configuration Mode(EOC) of the system. |
| 1.3.6.1.4.1.2272.1.4.16 | TablercAgentTable | not-accessible | current | Agents in a chassis table |
| 1.3.6.1.4.1.2272.1.4.16.1 | RowrcAgentEntry | not-accessible | current | Entry containing info. for a particular agent |
| 1.3.6.1.4.1.2272.1.4.16.1.1 | ColumnrcAgentId | read-only | current | entry id |
| 1.3.6.1.4.1.2272.1.4.16.1.2 | ColumnrcAgentSlot | read-only | current | slot agent is in. |
| 1.3.6.1.4.1.2272.1.4.16.1.3 | ColumnrcAgentIpAddr | read-only | current | agent's ip address. |
| 1.3.6.1.4.1.2272.1.4.17 | ScalarrcChasBrouterPorts | read-only | current | Used to indicate which ports in the system are configured as Brouter ports. |
| 1.3.6.1.4.1.2272.1.4.18 | ScalarrcChasGlobalFilterEnable | read-write | current | Used to enable/disable global filters in the system. This variable is currently not supported. |
| 1.3.6.1.4.1.2272.1.4.19 | ScalarrcChasVlanBySrcMacEnable | read-write | current | Used to enable/disable source MAC based VLANs in the system. |
| 1.3.6.1.4.1.2272.1.4.20 | ScalarrcChasDiffServEcnCompatibilityEnable | read-write | current | Used to enable/disable the Explicit Congestion Notification(ECN) compatibility feature. When set to FALSE , the system will mask the ECN bits in the DS field w… |
| 1.3.6.1.4.1.2272.1.4.21 | ScalarrcChasNewEnhancedOperMode | read-write | current | Enhanced operational mode. |
| 1.3.6.1.4.1.2272.1.4.22 | ScalarrcChasNewEMMode | read-write | current | This configuration is for enabling/disabling 128K mode. The change will take effect upon reboot. |
| 1.3.6.1.4.1.2272.1.4.23 | ScalarrcChasEmModeError | read-only | current | Used to indicate the Em-mode error status |
| 1.3.6.1.4.1.2272.1.4.24 | ScalarrcChasEnhancedOperMode | read-only | current | Enhanced Operational mode the switch currently has booted and will remain the same until the next reboot. |
| 1.3.6.1.4.1.2272.1.4.25 | ScalarrcChasEMMode | read-only | current | EM mode the switch currently has booted and will remain the same until the next reboot. |
| 1.3.6.1.4.1.2272.1.4.26 | ScalarrcChasFtpDaemonInSecondaryCpu | read-write | current | Used to enable/disable FTP daemon in 2nd cpu. |
| 1.3.6.1.4.1.2272.1.4.27 | ScalarrcChasSmltOnSingleCpEnable | read-write | current | Enable SMLT on single CP feature in the switch Not supported in VSP 3.3 |
| 1.3.6.1.4.1.2272.1.4.28 | ScalarrcChasNewVlanOptmMode | read-write | current | Vlan Optimization mode. |
| 1.3.6.1.4.1.2272.1.4.29 | ScalarrcChasVlanOptmMode | read-only | current | Vlan Optimization mode the switch currently has booted and will remain the same until the next reboot. |
| 1.3.6.1.4.1.2272.1.4.30 | NodercLaunchPad | |||
| 1.3.6.1.4.1.2272.1.4.30.1 | TablercLaunchPadTable | not-accessible | current | Launch Pad in a chassis table |
| 1.3.6.1.4.1.2272.1.4.30.1.1 | RowrcLaunchPadEntry | not-accessible | current | Entry containing Launch pad card info |
| 1.3.6.1.4.1.2272.1.4.30.1.1.1 | ColumnrcLaunchPadSlotId | read-only | current | Launch Pad card id |
| 1.3.6.1.4.1.2272.1.4.30.1.1.2 | ColumnrcLaunchPadMiniSlotId | read-only | current | Launch pad mini card id. |
| 1.3.6.1.4.1.2272.1.4.30.1.1.3 | ColumnrcLaunchPadAppType | read-only | current | Launch Pad application type. |
| 1.3.6.1.4.1.2272.1.4.30.1.1.4 | ColumnrcLaunchPadMiniSlotIp | read-only | current | Launch Pad mini card's ip address. |
| 1.3.6.1.4.1.2272.1.4.30.1.1.5 | ColumnrcLaunchPadNaapLpState | read-write | current | Enable/Disable naap Ip state. |
| 1.3.6.1.4.1.2272.1.4.30.1.1.6 | ColumnrcLaunchPadMiniSlotSwVersion | read-only | current | Launch Pad mini card's SW version. |
| 1.3.6.1.4.1.2272.1.4.30.1.1.7 | ColumnrcLaunchPadHWType | read-only | current | for identifying the ISD |
| 1.3.6.1.4.1.2272.1.4.30.2 | TablercLaunchPadClusterTable | not-accessible | current | Launch Pad Cluster Table |
| 1.3.6.1.4.1.2272.1.4.30.2.1 | RowrcLaunchPadClusterEntry | not-accessible | current | Entry containing Launch pad cluster info |
| 1.3.6.1.4.1.2272.1.4.30.2.1.1 | ColumnrcLaunchPadClusterId | not-accessible | current | Launch pad cluster id. |
| 1.3.6.1.4.1.2272.1.4.30.2.1.2 | ColumnrcLaunchPadClusterType | read-write | current | Launch Pad cluster type. |
| 1.3.6.1.4.1.2272.1.4.30.2.1.3 | ColumnrcLaunchPadClusterSize | read-write | current | Launch pad cluster size. |
| 1.3.6.1.4.1.2272.1.4.30.2.1.4 | ColumnrcLaunchPadClusterMembers | read-write | current | Launch pad cluster members |
| 1.3.6.1.4.1.2272.1.4.30.2.1.5 | ColumnrcLaunchPadClusterRowStatus | read-write | current | Launch pad cluster Row Status |
| 1.3.6.1.4.1.2272.1.4.30.2.1.6 | ColumnrcLaunchPadClusterMgmtVlan | read-write | current | Launch pad cluster management vlan Id. |
| 1.3.6.1.4.1.2272.1.4.30.2.1.7 | ColumnrcLaunchPadClusterSyncVlan | read-write | current | Launch pad cluster cp sync vlan Id. |
| 1.3.6.1.4.1.2272.1.4.30.2.1.8 | ColumnrcLaunchPadClusterTpsSize | read-write | current | Launch pad cluster TPS size. |
| 1.3.6.1.4.1.2272.1.4.30.2.1.9 | ColumnrcLaunchPadClusterTpsMembers | read-write | current | Launch pad cluster TPS members |
| 1.3.6.1.4.1.2272.1.4.30.2.1.10 | ColumnrcLaunchPadClusterPortMember | read-write | current | IS cluster user port list that needs to be monitored |
| 1.3.6.1.4.1.2272.1.4.31 | ScalarrcChasNaapEnable | read-write | current | To enable/disbale to napp feature. |
| 1.3.6.1.4.1.2272.1.4.32 | ScalarrcChasGlobalFilterOrderingEnable | read-only | current | Global Filter ordering in the system. |
| 1.3.6.1.4.1.2272.1.4.33 | ScalarrcChasNewGlobalFilterOrderingEnable | read-write | current | This configuration is for enabling/disabling global filter ordering. The change will take effect upon reboot. |
| 1.3.6.1.4.1.2272.1.4.34 | ScalarrcChasWsmDirectMode | read-write | current | This is for enabling/disabling configuration of same community strings on the WSM and 8600/8800. This is for allowing users to connect directly via SNMP to the… |
| 1.3.6.1.4.1.2272.1.4.35 | ScalarrcChasRspMode | read-write | current | This configuration is for enabling/disabling 256K mode. The change will take effect upon reboot. |
| 1.3.6.1.4.1.2272.1.4.36 | ScalarrcChasRspOperMode | read-only | current | R-mode the switch currently has booted and will remain the same until the next reboot. |
| 1.3.6.1.4.1.2272.1.4.37 | ScalarrcChasRspModeError | read-only | current | Used to indicate the r-mode error status |
| 1.3.6.1.4.1.2272.1.4.38 | NodercChasPOE | |||
| 1.3.6.1.4.1.2272.1.4.38.1 | ScalarrcChasPOEPower | read-only | current | The total PoE power which this chassis supports (Unit in Watts). |
| 1.3.6.1.4.1.2272.1.4.38.2 | ScalarrcChasPOEAllocatedPower | read-only | current | The total PoE power allocated for PoE modules installed in this chassis (Unit in Watts). |
| 1.3.6.1.4.1.2272.1.4.38.3 | ScalarrcChasPOEAvailablePower | read-only | current | The total PoE power available for any additional PoE power request or allocation (Unit in Watts). |
| 1.3.6.1.4.1.2272.1.4.38.4 | ScalarrcChasPOEBackUpPower | read-only | current | The total PoE power reserved for backup or redundancy (Unit in Watts). |
| 1.3.6.1.4.1.2272.1.4.39 | NodercRepeater | |||
| 1.3.6.1.4.1.2272.1.4.39.1 | TablercRepeaterTable | not-accessible | current | Port repeater table |
| 1.3.6.1.4.1.2272.1.4.39.1.1 | RowrcRepeaterEntry | not-accessible | current | Entry containing info. for a particular repeater |
| 1.3.6.1.4.1.2272.1.4.39.1.1.1 | ColumnrcRepeaterId | read-only | current | A value that uniquely identifies the repeater. |
| 1.3.6.1.4.1.2272.1.4.39.1.1.2 | ColumnrcRepeaterFirstPort | read-write | current | First port member of the Repeater |
| 1.3.6.1.4.1.2272.1.4.39.1.1.3 | ColumnrcRepeaterSecondPort | read-write | current | Second port member of the Repeater |
| 1.3.6.1.4.1.2272.1.4.39.1.1.4 | ColumnrcRepeaterVlanId | read-write | current | A value that uniquely identifies the Virtual LAN associated with first port |
| 1.3.6.1.4.1.2272.1.4.39.1.1.5 | ColumnrcRepeaterName | read-write | current | An administratively-assigned name for this repeater. |
| 1.3.6.1.4.1.2272.1.4.39.1.1.6 | ColumnrcRepeaterRowStatus | read-write | current | Used to create/delete entries in the rcRepeater. |
| 1.3.6.1.4.1.2272.1.4.40 | ScalarrcChasMcastCheckPktEnable | read-write | current | Used to enable/disable Multicast check packet in the system. This change will take effect upon reboot. |
| 1.3.6.1.4.1.2272.1.4.41 | ScalarrcChasSystemMonitorEnable | read-write | current | Enable/Disable System monitoring in the switch |
| 1.3.6.1.4.1.2272.1.4.42 | ScalarrcChasSysMonMonitoringEnable | read-write | current | Dyanamically Enable/Disable SystemMonitor monitoring engine in the switch |
| 1.3.6.1.4.1.2272.1.4.43 | ScalarrcChasSysMonDetectionTime | read-write | current | System Monitor Detection time in seconds |
| 1.3.6.1.4.1.2272.1.4.44 | ScalarrcChasNewMulticastResourceReservation | read-write | current | Used to reserve MGIDs for IP Multicast. The change will take effect upon reboot. |
| 1.3.6.1.4.1.2272.1.4.45 | ScalarrcChasMulticastResourceReservation | read-only | current | MGIDs the switch currently has reserved for IP Multicast; will remain the same until the next reboot. |
| 1.3.6.1.4.1.2272.1.4.46 | ScalarrcChasNewMaxVlanResourceReservation | read-write | current | A mode where all MGIDs are reserved for VLAN use only; no IPMC. The change will take effect upon reboot. |
| 1.3.6.1.4.1.2272.1.4.47 | ScalarrcChasMaxVlanResourceReservation | read-only | current | Tells if all MGIDs are reserved for VLAN use. Will remain the same until the next reboot. |
| 1.3.6.1.4.1.2272.1.4.48 | ScalarrcChasMgidUsageVlanCurrent | read-only | current | Number of MGIDs currently used for VLAN, including SMLT |
| 1.3.6.1.4.1.2272.1.4.49 | ScalarrcChasMgidUsageVlanRemaining | read-only | current | Number of MGIDs remaining allocated for VLAN |
| 1.3.6.1.4.1.2272.1.4.50 | ScalarrcChasMgidUsageMulticastCurrent | read-only | current | Number of MGIDs currently used for IPMC |
| 1.3.6.1.4.1.2272.1.4.51 | ScalarrcChasMgidUsageMulticastRemaining | read-only | current | Number of MGIDs remaining allocated for IPMC |
| 1.3.6.1.4.1.2272.1.4.52 | ScalarrcChasPowerManagementEnable | read-write | current | Turn on or off Chassis Power Management. The configuration will take effect upon reboot. This object is not applicable to VSP |
| 1.3.6.1.4.1.2272.1.4.53 | ScalarrcChasForceTopologyIpFlagEnable | read-write | current | Used to enable/disable flag which is used to set the CLIP-ip as topology ip |
| 1.3.6.1.4.1.2272.1.4.54 | ScalarrcChasCircuitlessIpId | read-write | current | The Clip-Id set by the user to be used as Topology-ip. 0' means no circuitless IP id while '1..256' is valid circuitless Id |
| 1.3.6.1.4.1.2272.1.4.55 | ScalarrcChasPowerManagementOriginalEnable | read-only | current | On or off value of Chassis Power Management which the switch has currently booted. It will remain the same until the next reboot. |
| 1.3.6.1.4.1.2272.1.4.56 | ScalarrcChasPowerManagementFanCheck | read-write | current | Turn on or off the Fan Check functionility of Chassis Power Management. The value takes effect only on reboot. |
| 1.3.6.1.4.1.2272.1.4.57 | ScalarrcChasPowerManagementFanCheckOriginalState | read-only | current | The on or off value of fan check which the switch has booted with. The value does not take effect till the next reboot. |
| 1.3.6.1.4.1.2272.1.4.58 | ScalarrcChasEsmHashIndex | read-write | current | This is for enabling/disabling hashing on the upper 24 bits of the UNI for ESM card |
| 1.3.6.1.4.1.2272.1.4.59 | ScalarrcChasSwitchFabricRedundancy | read-write | current | Turn on or off 2:1 Redundancy for 8011co Chassis |
| 1.3.6.1.4.1.2272.1.4.60 | ScalarrcChasSystemDefault | read-write | current | Used to default the system |
| 1.3.6.1.4.1.2272.1.4.61 | ScalarrcChasTakeIOCardOfflineEnable | read-write | current | Enable/Disable IO Card to go offline when F2E sees excessive resets. |
| 1.3.6.1.4.1.2272.1.4.62 | ScalarrcChasAutoResetFabricEnable | read-write | current | Enable/Disable fabric to be reset automatically on fab mem full error. |
| 1.3.6.1.4.1.2272.1.4.63 | ScalarrcChasSecurityConsoleFlag | read-write | current | Used to enable/disable flag which is used for Security Console.When it is enabled, the console connection works only with the null modem cable |
| 1.3.6.1.4.1.2272.1.4.64 | ScalarrcChasRcBridgeFdbOldQueryFlagEnable | read-write | current | Used to enable/disable rcBridgeNewFdbTable for fdb query |
| 1.3.6.1.4.1.2272.1.4.65 | NodercChasLed | |||
| 1.3.6.1.4.1.2272.1.4.65.1 | TablercChasLedTable | not-accessible | current | This table contains information about LEDs of the chassis |
| 1.3.6.1.4.1.2272.1.4.65.1.1 | RowrcChasLedEntry | not-accessible | current | Contains information regarding a LED Unit |
| 1.3.6.1.4.1.2272.1.4.65.1.1.1 | ColumnrcChasLedId | read-only | current | The chassis LED Id. |
| 1.3.6.1.4.1.2272.1.4.65.1.1.2 | ColumnrcChasLedLabel | read-only | current | The LED's label name. |
| 1.3.6.1.4.1.2272.1.4.65.1.1.3 | ColumnrcChasLedStatus | read-only | current | Type of the Led: - unknown(1) - type can not be determined. - greenSteady(2), - greenBlinking(3), - amberSteady(4), - amberBlinking(5), - off(6), - redSteady(7… |
| 1.3.6.1.4.1.2272.1.4.66 | ScalarrcChasPartNumber | read-only | current | Device part number or PEC code |
| 1.3.6.1.4.1.2272.1.4.67 | ScalarrcChasModelName | read-only | current | Chassis model name. For APLS platform, it is model name which is in teh seeprom |
| 1.3.6.1.4.1.2272.1.4.68 | ScalarrcChasBrandName | read-only | current | Chassis brand name. For APLS platform, it is programmed in the seeprom |
| 1.3.6.1.4.1.2272.1.5 | NodercMirror | |||
| 1.3.6.1.4.1.2272.1.5.1 | ScalarrcMirrorSaveConfig | read-write | current | Control whether Mirror configuration information should be saved to NVRAM so mirror settings can be automatically reinstalled after a system reboot. Setting rc… |
| 1.3.6.1.4.1.2272.1.5.2 | NodercMirrorByPort | |||
| 1.3.6.1.4.1.2272.1.5.2.1 | ScalarrcMirrorByPortEnable | read-write | obsolete | Used to indicate whether the mirror by port feature is active. The system can only support mirroring on two ports. When this feature is active, all packets rec… |
| 1.3.6.1.4.1.2272.1.5.2.2 | ScalarrcMirrorByPortMirrorPort | read-write | obsolete | The ifIndex of the port to forward mirrored frames to. |
| 1.3.6.1.4.1.2272.1.5.2.3 | ScalarrcMirrorByPortEnableMirroredPortOne | read-write | obsolete | Used to indicate whether the port specified in rcMirrorByPortMirroredPortOne should be mirrored. |
| 1.3.6.1.4.1.2272.1.5.2.4 | ScalarrcMirrorByPortMirroredPortOne | read-write | obsolete | The ifIndex of the port to be mirrored. That is, traffic received on this port will be sent to the mirror port. |
| 1.3.6.1.4.1.2272.1.5.2.5 | ScalarrcMirrorByPortEnableMirroredPortTwo | read-write | obsolete | Used to indicate whether the port specified in rcMirrorByPortMirroredPortTwo should be mirrored. |
| 1.3.6.1.4.1.2272.1.5.2.6 | ScalarrcMirrorByPortMirroredPortTwo | read-write | obsolete | The ifIndex of the port to be mirrored. That is, traffic received on this port will be sent to the mirror port. |
| 1.3.6.1.4.1.2272.1.6 | NodercDipSwitch | |||
| 1.3.6.1.4.1.2272.1.6.1 | ScalarrcIsolateUnconfigPorts | read-only | obsolete | Used to indicate whether ports that are unconfigured should be assigned to the 'isolated' VLAN. Ports assigned to the 'isolated' VLAN can only communicate with… |
| 1.3.6.1.4.1.2272.1.6.2 | ScalarrcUseFactorySettings | read-only | obsolete | Used to indicate whether the system should ignore the configuration information stored in NVRAM when the system is booted. |
| 1.3.6.1.4.1.2272.1.6.3 | ScalarrcHighPriorityMode | read-only | obsolete | Used to indicate whether the system is configured to operate in a high priority mode. The switch can operate in either a 'best effort' or 'high priority' mode.… |
| 1.3.6.1.4.1.2272.1.7 | NodercTblSize | |||
| 1.3.6.1.4.1.2272.1.7.1 | ScalarrcTblRmonStatSize | read-only | current | Used to indicate the current size of the RMON Statistic table. |
| 1.3.6.1.4.1.2272.1.7.2 | ScalarrcTblRmonHistoryControlSize | read-only | current | Used to indicate the current size of the RMON History Control table. |
| 1.3.6.1.4.1.2272.1.7.3 | ScalarrcTblRmonHistoryEnetSize | read-only | current | Used to indicate the current size of the RMON History Ethernet table. |
| 1.3.6.1.4.1.2272.1.7.4 | ScalarrcTblRmonAlarmSize | read-only | current | Used to indicate the current size of the RMON Alarm table. |
| 1.3.6.1.4.1.2272.1.7.5 | ScalarrcTblRmonEventSize | read-only | current | Used to indicate the current size of the RMON Event table. |
| 1.3.6.1.4.1.2272.1.7.6 | ScalarrcTblRmonLogSize | read-only | current | Used to indicate the current size of the RMON Log table. |
| 1.3.6.1.4.1.2272.1.7.7 | ScalarrcTblArTblSize | read-only | current | Used to indicate the size of the Address Translation (AR) table. |
| 1.3.6.1.4.1.2272.1.7.8 | ScalarrcTblArFree | read-only | current | Used to indicate the number of free entries that are available in the Address Translation (AR) table. |
| 1.3.6.1.4.1.2272.1.7.9 | ScalarrcTblArNoSpace | read-only | current | Used to indicate the number of entries that could not be added to the Address Translation (AR) table due to lack of space. |
| 1.3.6.1.4.1.2272.1.7.10 | ScalarrcTblArAdded | read-only | current | Used to indicate the number of entries added to the Address Translation (AR) table. |
| 1.3.6.1.4.1.2272.1.7.11 | ScalarrcTblArDeleted | read-only | current | Used to indicate the number of entries deleted to the Address Translation (AR) table. |
| 1.3.6.1.4.1.2272.1.7.12 | ScalarrcTblArMacAdded | read-only | current | Used to indicate the number of MAC entries added to the Address Translation (AR) table. |
| 1.3.6.1.4.1.2272.1.7.13 | ScalarrcTblArMacDeleted | read-only | current | Used to indicate the number of MAC entries deleted to the Address Translation (AR) table. |
| 1.3.6.1.4.1.2272.1.7.14 | ScalarrcTblArMacMoved | read-only | current | Used to indicate the number of MAC entries moved in the Address Translation (AR) table. |
| 1.3.6.1.4.1.2272.1.7.15 | ScalarrcTblArIpAdded | read-only | current | Used to indicate the number of IP entries added to the Address Translation (AR) table. |
| 1.3.6.1.4.1.2272.1.7.16 | ScalarrcTblArIpDeleted | read-only | current | Used to indicate the number of IP entries deleted to the Address Translation (AR) table. |
| 1.3.6.1.4.1.2272.1.7.17 | ScalarrcTblArMcastTblSize | read-only | current | Used to indicate the size of the Multicast Address Translation (AR) table. |
| 1.3.6.1.4.1.2272.1.7.18 | ScalarrcTblArFreeMcastGroups | read-only | current | Used to indicate the number of free multicast groups availabe in the Address Translation (AR) table. |
| 1.3.6.1.4.1.2272.1.7.19 | ScalarrcTblArIpMcastAdded | read-only | current | Used to indicate the number of Ip multicast entries that are added to the Address Translation (AR) table. |
| 1.3.6.1.4.1.2272.1.7.20 | ScalarrcTblArIpMcastDeleted | read-only | current | Used to indicate the number of Ip multicast entries that are deleted from the Address Translation (AR) table. |
| 1.3.6.1.4.1.2272.1.7.21 | ScalarrcTblArVlanByPortAdded | read-only | current | Used to indicate the number of VLAN by port entries that are added to the Address Translation (AR) table. |
| 1.3.6.1.4.1.2272.1.7.22 | ScalarrcTblArVlanByPortDeleted | read-only | current | Used to indicate the number of VLAN by port entries that are deleted from the Address Translation (AR) table. |
| 1.3.6.1.4.1.2272.1.7.23 | ScalarrcTblArVlanByProtocolAdded | read-only | current | Used to indicate the number of Vlans by Protocol Type entries that are added to the Address Translation (AR) table. |
| 1.3.6.1.4.1.2272.1.7.24 | ScalarrcTblArVlanByProtocolDeleted | read-only | current | Used to indicate the number of Vlans by Protocol Type entries that are deleted from the Address Translation (AR) table. |
| 1.3.6.1.4.1.2272.1.7.25 | ScalarrcTblArVlanByIpSubnetAdded | read-only | current | Used to indicate the number of VLAN by Ip entries that are added to the Address Translation (AR) table. |
| 1.3.6.1.4.1.2272.1.7.26 | ScalarrcTblArVlanByIpSubnetDeleted | read-only | current | Used to indicate the number of VLAN by Ip entries that are deleted from the Address Translation (AR) table. |
| 1.3.6.1.4.1.2272.1.7.27 | ScalarrcTblArIpSubnetsAdded | read-only | current | Used to indicate the number of Ip subnet entries that are added to the Address Translation (AR) table. |
| 1.3.6.1.4.1.2272.1.7.28 | ScalarrcTblArIpSubnetsDeleted | read-only | current | Used to indicate the number of Ip subnet entries that are deleted from the Address Translation (AR) table. |
| 1.3.6.1.4.1.2272.1.7.29 | ScalarrcTblArRsvpsAdded | read-only | current | Used to indicate the number of RSVP entries that are added to the Address Translation (AR) table. |
| 1.3.6.1.4.1.2272.1.7.30 | ScalarrcTblArRsvpsDeleted | read-only | current | Used to indicate the number of RSVP entries that are deleted from the Address Translation (AR) table. |
| 1.3.6.1.4.1.2272.1.7.31 | ScalarrcTblBrdgFdbSize | read-only | current | Used to indicate the number of entries in the dot1d forwarding database table. |
| 1.3.6.1.4.1.2272.1.7.32 | ScalarrcTblBrdgStaticSize | read-only | current | Used to indicate the number of entries in the dot1d Static Address Filtering table. |
| 1.3.6.1.4.1.2272.1.7.33 | ScalarrcTblIpAddrSize | read-only | current | Used to indicate the number of entries in the IP Address table. |
| 1.3.6.1.4.1.2272.1.7.34 | ScalarrcTblIpForwardingSize | read-only | current | Used to indicate the number of entries in the IP Forwarding/Best Route table. |
| 1.3.6.1.4.1.2272.1.7.35 | ScalarrcTblIpNetToMediaSize | read-only | current | Used to indicate the number of entries in the IP Net-to-media table. |
| 1.3.6.1.4.1.2272.1.7.36 | ScalarrcTblIpBestPlusAltRouteSize | read-only | current | |
| 1.3.6.1.4.1.2272.1.7.37 | ScalarrcTblIpBestPathSize | read-only | current | |
| 1.3.6.1.4.1.2272.1.7.38 | ScalarrcTblIpBestPlusAltPathSize | read-only | current | |
| 1.3.6.1.4.1.2272.1.8 | NodercIp | |||
| 1.3.6.1.4.1.2272.1.8.1 | NodercIpConf | |||
| 1.3.6.1.4.1.2272.1.8.1.1 | TablercIpConfTable | not-accessible | current | A table used to maintain IP routing information for a particular interface. |
| 1.3.6.1.4.1.2272.1.8.1.1.1 | RowrcIpConfEntry | not-accessible | current | Entry containing IP routing information. An entry is automatically created in this table when routing is enabled for an interface -or- when an ip address is co… |
| 1.3.6.1.4.1.2272.1.8.1.1.1.1 | ColumnrcIpConfIfIndex | read-only | current | An unique value to identify a physical interface or a logical interface (VLAN). |
| 1.3.6.1.4.1.2272.1.8.1.1.1.2 | ColumnrcIpConfAdvertDefRte | read-write | current | Used to indicate whether this interface should advertize a RIP default route. |
| 1.3.6.1.4.1.2272.1.8.1.1.1.3 | ColumnrcIpConfAcceptDefRte | read-write | current | Used to indicate whether this interface should accept a RIP default route. |
| 1.3.6.1.4.1.2272.1.8.1.1.1.4 | ColumnrcIpConfRowStatus | read-write | current | Row status for this entry. |
| 1.3.6.1.4.1.2272.1.8.1.1.1.5 | ColumnrcIpConfRipEnable | read-write | current | Enable or disable RIP routing on the specified interface. |
| 1.3.6.1.4.1.2272.1.8.1.1.1.6 | ColumnrcIpConfOspfEnable | read-write | current | Enable or disable OSPF routing on the specified interface. |
| 1.3.6.1.4.1.2272.1.8.1.1.1.7 | ColumnrcIpConfIgmpEnable | read-write | current | Enable or disable IGMP on the specified interface. |
| 1.3.6.1.4.1.2272.1.8.1.1.1.8 | ColumnrcIpConfAddrAssigned | read-only | current | Indicate whether IpAddress has been assigned for this interface. |
| 1.3.6.1.4.1.2272.1.8.1.1.1.9 | ColumnrcIpConfDhcpEnable | read-write | current | Enable or disable DHCP on the specified interface. |
| 1.3.6.1.4.1.2272.1.8.1.1.1.10 | ColumnrcIpConfTriggeredUpdateEnable | read-write | current | Used to indicate whether the RIP triggered update feature should be enabled on this interface. |
| 1.3.6.1.4.1.2272.1.8.1.1.1.11 | ColumnrcIpConfAutoAggrerateEnable | read-write | current | Used to indicate whether the auto aggregation feature should be enabled on this interface. |
| 1.3.6.1.4.1.2272.1.8.1.1.1.12 | ColumnrcIpConfGenerateDefaultRoute | read-write | current | Used to indicate whether to generate a default RIP route on this interface. |
| 1.3.6.1.4.1.2272.1.8.1.1.1.13 | ColumnrcIpConfAdvertiseWhenDown | read-write | current | The value is used indicated whether vlan state change should be notified to layer 3 or not, provided the vlan is configured as routable interface. Also used fo… |
| 1.3.6.1.4.1.2272.1.8.1.1.1.14 | ColumnrcIpConfDirectBroadcastEnable | read-write | current | Used to indicate whether this interface should forward direct broadcast traffic |
| 1.3.6.1.4.1.2272.1.8.1.1.1.15 | ColumnrcIpConfRipInPolicy | read-write | current | Used to indicate whether this interface should advertize a RIP default route. |
| 1.3.6.1.4.1.2272.1.8.1.1.1.16 | ColumnrcIpConfRipOutPolicy | read-write | current | Used to indicate whether this interface should accept a RIP default route. |
| 1.3.6.1.4.1.2272.1.8.1.1.1.17 | ColumnrcIpConfOspfIfType | read-write | current | OSPF Interface Type. |
| 1.3.6.1.4.1.2272.1.8.1.1.1.18 | ColumnrcIpConfRipCost | read-write | current | Used to indicate the rip cost for this interface. |
| 1.3.6.1.4.1.2272.1.8.1.1.1.19 | ColumnrcIpConfRipHolddown | read-write | current | Used to indicate the rip holddown timer for this interface |
| 1.3.6.1.4.1.2272.1.8.1.1.1.20 | ColumnrcIpConfRipTimeout | read-write | current | Used to indicate the rip timeout interval for this interface |
| 1.3.6.1.4.1.2272.1.8.1.1.1.21 | ColumnrcIpConfRsmltEnable | read-write | current | Used to enable Route Smlt feature. |
| 1.3.6.1.4.1.2272.1.8.1.1.1.22 | ColumnrcIpConfReversePathCheckEnable | read-write | current | Used to indicate whether this interface should perform Reverse Path Check |
| 1.3.6.1.4.1.2272.1.8.1.1.1.23 | ColumnrcIpConfReversePathCheckMode | read-write | current | Reverse Path Checking mode. |
| 1.3.6.1.4.1.2272.1.8.1.1.1.24 | ColumnrcIpConfIsisEnable | read-write | current | Enable/disable ISIS protocol for this IP entry |
| 1.3.6.1.4.1.2272.1.8.1.1.1.25 | ColumnrcIpConfBfdEnable | read-create | current | Enable or disable BFD on the specified interface. |
| 1.3.6.1.4.1.2272.1.8.1.1.1.26 | ColumnrcIpConfIpVpnLiteEnable | read-create | current | Enable or disable ipvpn-lite capability on the specified circuitless ip interface. |
| 1.3.6.1.4.1.2272.1.8.1.1.1.27 | ColumnrcIpConfSpbMulticastEnable | read-create | current | Enable or disable spb-multicast on this port |
| 1.3.6.1.4.1.2272.1.8.1.1.1.28 | ColumnrcIpConfSpbMulticastQuerierAddr | read-create | current | querier-addr for spb-multicast |
| 1.3.6.1.4.1.2272.1.8.1.1.1.29 | ColumnrcIpConfVrrpVersion | read-create | current | Set the VRRP version for IPv4 on the specified interface. It does not impact the use of IPv6 VRRPv3 |
| 1.3.6.1.4.1.2272.1.8.1.1.1.30 | ColumnrcIpConfPimGatewayEnable | read-create | current | Enable or disable PIM Gateway on this port |
| 1.3.6.1.4.1.2272.1.8.1.1.1.31 | ColumnrcIpConfVrrpChkSumComputation | read-create | current | Set the IPv4 VRRPv3 checksum computation method on the specified interface. |
| 1.3.6.1.4.1.2272.1.8.1.1.1.32 | ColumnrcIpConfIpsecEnable | read-write | current | Used to enable ipsec feature. |
| 1.3.6.1.4.1.2272.1.8.1.2 | TablercIpConfOspfTable | not-accessible | current | A table used to maintain OSPF information for a particular interface. |
| 1.3.6.1.4.1.2272.1.8.1.2.1 | RowrcIpConfOspfEntry | not-accessible | current | Entry containing OSPF information. An entry is automatically created in this table when routing is enabled for an interface -or- when an ip address is configur… |
| 1.3.6.1.4.1.2272.1.8.1.2.1.1 | ColumnrcIpConfOspfIfIndex | read-only | current | An unique value to identify a physical interface or a logical interface (VLAN). |
| 1.3.6.1.4.1.2272.1.8.1.2.1.2 | ColumnrcIpConfOspfRtrPriority | read-write | current | The priority of this interface. Used in multi- access networks, this field is used in the designated router election algorithm. The value 0 signifies that the … |
| 1.3.6.1.4.1.2272.1.8.1.2.1.3 | ColumnrcIpConfOspfMetric | read-write | current | The metric for this type of service (TOS) on this interface. The default value of the TOS 0 Metric is (10^9 / ifSpeed). The value FFFF means 'no route via this… |
| 1.3.6.1.4.1.2272.1.8.1.2.1.4 | ColumnrcIpConfOspfAuthKey | read-write | current | The Authentication Key. If the Area's Authorization Type is simplePassword, and the key length is shorter than 8 octets, the agent will left adjust and zero fi… |
| 1.3.6.1.4.1.2272.1.8.1.2.1.5 | ColumnrcIpConfOspfRowStatus | read-write | current | Row status for this entry. |
| 1.3.6.1.4.1.2272.1.8.1.2.1.6 | ColumnrcIpConfOspfHelloInterval | read-write | current | The length of time, in seconds, between the Hello packets that the router sends on the interface. This value must be the same for all routers attached to a com… |
| 1.3.6.1.4.1.2272.1.8.1.2.1.7 | ColumnrcIpConfOspfRtrDeadInterval | read-write | current | The number of seconds that a router's Hello packets have not been seen before it's neighbors declare the router down. This should be some multiple of the Hello… |
| 1.3.6.1.4.1.2272.1.8.1.2.1.8 | ColumnrcIpConfOspfIfAreaId | read-write | current | A 32-bit integer uniquely identifying the area to which the interface connects. Area ID 0.0.0.0 is used for the OSPF backbone. |
| 1.3.6.1.4.1.2272.1.8.1.2.1.9 | ColumnrcIpConfOspfAuthType | read-write | current | The authentication type specified for an interface. Additional authentication types may be assigned locally. |
| 1.3.6.1.4.1.2272.1.8.1.2.1.10 | ColumnrcIpConfOspfPollInterval | read-write | current | OSPF NBMA Interface Poll Interval. |
| 1.3.6.1.4.1.2272.1.8.1.2.1.11 | ColumnrcIpConfOspfIfMtuIgnore | read-write | current | Mtu-ignore flag is for ignoring the mtu checking in ospf bdb |
| 1.3.6.1.4.1.2272.1.8.1.2.1.12 | ColumnrcIpConfOspfBfdEnable | read-write | current | Used to enable/disable BFD for OSPF. |
| 1.3.6.1.4.1.2272.1.8.1.3 | NodercIpConfOspfDefaultMetric | |||
| 1.3.6.1.4.1.2272.1.8.1.3.1 | ScalarrcIpConfOspfDefaultMetric10MegPort | read-write | current | Used to indicate the cost associated with 10Meg Interface(Port). |
| 1.3.6.1.4.1.2272.1.8.1.3.2 | ScalarrcIpConfOspfDefaultMetric100MegPort | read-write | current | Used to indicate the cost associated with 100Meg Interface(Port). |
| 1.3.6.1.4.1.2272.1.8.1.3.3 | ScalarrcIpConfOspfDefaultMetric1000MegPort | read-write | current | Used to indicate the cost associated with 1000Meg Interface(Port). |
| 1.3.6.1.4.1.2272.1.8.1.3.4 | ScalarrcIpConfOspfDefaultMetric10000MegPort | read-write | current | Used to indicate the cost associated with 10000Meg Interface(Port). |
| 1.3.6.1.4.1.2272.1.8.1.3.5 | ScalarrcIpConfOspfDefaultMetric40000MegPort | read-write | current | Used to indicate the cost associated with 40000Meg Interface(Port). |
| 1.3.6.1.4.1.2272.1.8.1.3.6 | ScalarrcIpConfOspfDefaultMetricVlan | read-write | current | Used to indicate the cost associated with Vlan Interface |
| 1.3.6.1.4.1.2272.1.8.1.3.7 | ScalarrcIpConfOspfDefaultMetric100000MegPort | read-write | current | Used to indicate the cost associated with 100000Meg Interface(Port). |
| 1.3.6.1.4.1.2272.1.8.1.3.8 | ScalarrcIpConfOspfDefaultMetric25000MegPort | read-write | current | Used to indicate the cost associated with 25000Meg Interface(Port). |
| 1.3.6.1.4.1.2272.1.8.1.4 | NodercIpConfOspf | |||
| 1.3.6.1.4.1.2272.1.8.1.4.1 | ScalarrcIpConfOspfTrapEnable | read-write | current | Used to indicate whether Ospf Traps should be sent. |
| 1.3.6.1.4.1.2272.1.8.1.4.2 | ScalarrcIpConfOspfAutoVirtLinkEnable | read-write | current | Used to indicate whether auto virtual link creation is enabled or not. If set to true OSPF will create virtual links between ABRs whether it is needed or not, … |
| 1.3.6.1.4.1.2272.1.8.1.4.3 | ScalarrcIpConfOspfSpfHoldDownTime | read-write | current | The SPF Hold Down Timer value. The SPF will run at most once per hold down timer value. |
| 1.3.6.1.4.1.2272.1.8.1.4.4 | ScalarrcIpConfOspfAction | read-write | current | |
| 1.3.6.1.4.1.2272.1.8.1.4.5 | ScalarrcIpConfOspfRfc1583Compatibility | read-write | current | Controls the preference rules used when choosing among multiple AS-External-LSAs advertising the same destination. When this is enabled, the preference rule wi… |
| 1.3.6.1.4.1.2272.1.8.1.4.6 | ScalarrcIpConfOspfHelperModeDisable | read-write | current | Disables Graceful Restart Helper Mode feature. The feature is enabled by default (so this flag is disabled by default). |
| 1.3.6.1.4.1.2272.1.8.1.6 | NodercIpConfGlobal | |||
| 1.3.6.1.4.1.2272.1.8.1.6.1 | ScalarrcIpConfGlobalRipHoldDownTime | read-write | current | Used to set the system-wide RIP hold down time in seconds. |
| 1.3.6.1.4.1.2272.1.8.1.6.2 | ScalarrcIpConfGlobalIcmpNetUnreach | read-write | current | Used to set the icmp net unreach feature enable/disable. |
| 1.3.6.1.4.1.2272.1.8.1.6.3 | ScalarrcIpConfGlobalEcmpEnable | read-write | current | Used to set the ecmp enable/disable. |
| 1.3.6.1.4.1.2272.1.8.1.6.4 | ScalarrcIpConfGlobalEcmpMaxPath | read-write | current | Used to globally configure maximum ECMP paths number. |
| 1.3.6.1.4.1.2272.1.8.1.6.5 | ScalarrcIpConfGlobalAlternativeEnable | read-write | current | Used to globally configure alternative enable. |
| 1.3.6.1.4.1.2272.1.8.1.6.6 | ScalarrcIpConfGlobalRouteDiscoveryEnable | read-write | current | Enable/disable ICMP Route Discovery feature |
| 1.3.6.1.4.1.2272.1.8.1.6.8 | ScalarrcIpConfGlobalRipTimeOutInterval | read-write | current | Rip TimeOut Interval in seconds |
| 1.3.6.1.4.1.2272.1.8.1.6.9 | ScalarrcIpConfGlobalRipDefImportMetric | read-write | current | Rip def import metric |
| 1.3.6.1.4.1.2272.1.8.1.6.10 | ScalarrcIpConfGlobalEcmp1PathList | read-write | current | Routes to networks specified in this prefix-list can have upto 1 ECMP path, irrespective of ecmp-max-path configuration |
| 1.3.6.1.4.1.2272.1.8.1.6.11 | ScalarrcIpConfGlobalEcmp2PathList | read-write | current | Routes to networks specified in this prefix-list can have upto 2 ECMP path, irrespective of ecmp-max-path configuration. |
| 1.3.6.1.4.1.2272.1.8.1.6.12 | ScalarrcIpConfGlobalEcmp3PathList | read-write | current | Routes to networks specified in this prefix-list can have upto 3 ECMP path, irrespective of ecmp-max-path configuration. |
| 1.3.6.1.4.1.2272.1.8.1.6.13 | ScalarrcIpConfGlobalEcmp4PathList | read-write | current | Routes to networks specified in this prefix-list can have upto 4 ECMP path, irrespective of ecmp-max-path configuration. |
| 1.3.6.1.4.1.2272.1.8.1.6.14 | ScalarrcIpConfGlobalEcmpPathListApply | read-write | current | This is to apply any changes in ECMP path list configuration or in the prefix-lists configured to be used as path list |
| 1.3.6.1.4.1.2272.1.8.1.6.15 | ScalarrcIpConfGlobalIcmpRedirectMsg | read-write | current | |
| 1.3.6.1.4.1.2272.1.8.1.6.16 | ScalarrcIpConfGlobalMulticastMacFloodingStatus | read-write | current | |
| 1.3.6.1.4.1.2272.1.8.1.6.17 | ScalarrcIpConfGlobalArpThreshold | read-write | current | Defines the maximum number of outstanding arp request a switch can generate. |
| 1.3.6.1.4.1.2272.1.8.1.6.18 | ScalarrcIpConfGlobalAllowMoreSpecificNonLocalRouteEnable | read-write | current | Used to determine whether more specific non local routes will go into the routing table. |
| 1.3.6.1.4.1.2272.1.8.1.6.19 | ScalarrcIpConfGlobalUdpCheckSumEnable | read-write | current | Enable/disable UDP checksum calculation |
| 1.3.6.1.4.1.2272.1.8.1.6.20 | ScalarrcIpConfGlobalSuperNetEnable | read-write | current | Used to globally enable Supernetting/ CIDR routing for IP |
| 1.3.6.1.4.1.2272.1.8.1.6.21 | ScalarrcIpConfGlobalEcmp5PathList | read-write | current | Routes to networks specified in this prefix-list can have upto 5 ECMP path, irrespective of ecmp-max-path configuration. |
| 1.3.6.1.4.1.2272.1.8.1.6.22 | ScalarrcIpConfGlobalEcmp6PathList | read-write | current | Routes to networks specified in this prefix-list can have upto 6 ECMP path, irrespective of ecmp-max-path configuration. |
| 1.3.6.1.4.1.2272.1.8.1.6.23 | ScalarrcIpConfGlobalEcmp7PathList | read-write | current | Routes to networks specified in this prefix-list can have upto 7 ECMP path, irrespective of ecmp-max-path configuration. |
| 1.3.6.1.4.1.2272.1.8.1.6.24 | ScalarrcIpConfGlobalEcmp8PathList | read-write | current | Routes to networks specified in this prefix-list can have upto 8 ECMP path, irrespective of ecmp-max-path configuration. |
| 1.3.6.1.4.1.2272.1.8.1.6.25 | ScalarrcIpConfGlobalGarpEnable | read-write | current | Used to set the gratuitous-arp enable/disable. |
| 1.3.6.1.4.1.2272.1.8.1.6.26 | ScalarrcIpConfGlobalArpMcastMacFlooding | read-write | current | Enable/disable Ip Arp Multicast Mac Flooding feature. |
| 1.3.6.1.4.1.2272.1.8.1.6.27 | ScalarrcIpConfGlobalSourceRouteEnable | read-write | current | Used to globally enable/disable ip source routing feature. |
| 1.3.6.1.4.1.2272.1.8.1.6.28 | ScalarrcIpConfGlobalIcmpEchoBroadcastRequestEnable | read-write | current | Used to globally enable/disable ip icmp echo broadcast request feature. |
| 1.3.6.1.4.1.2272.1.8.1.7 | TablercIpConfOspfAreaTable | not-accessible | current | A table used to maintain OSPF information for a particular Area. |
| 1.3.6.1.4.1.2272.1.8.1.7.1 | RowrcIpConfOspfAreaEntry | not-accessible | current | Entry containing OSPF Area configuration information. An entry is automatically created in this table when an area is configured through ospfAreaTable in (rfc1… |
| 1.3.6.1.4.1.2272.1.8.1.7.1.1 | ColumnrcIpConfOspfAreaId | read-only | current | An unique value to identify an area. Area ID 0.0.0.0 is used for the OSPF backbone. |
| 1.3.6.1.4.1.2272.1.8.1.7.1.2 | ColumnrcIpConfOspfAreaImportSummary | read-write | current | The area's support for importing Summary advertisements into a stub area. This field should be used only if ospfImportASExtern is set to FALSE |
| 1.3.6.1.4.1.2272.1.8.1.7.1.3 | ColumnrcIpConfOspfAreaActiveIfCount | read-only | current | This variable displays the number of active interfaces configured in this area. An area cannot be deleted if this value is > 0. |
| 1.3.6.1.4.1.2272.1.8.1.8 | TablercIpConfV2Table | not-accessible | obsolete | A table used to maintain IP routing information for a particular interface. |
| 1.3.6.1.4.1.2272.1.8.1.8.1 | RowrcIpConfV2Entry | not-accessible | obsolete | Entry containing IP routing information. An entry is automatically created in this table when routing is enabled for an interface -or- when an ip address is co… |
| 1.3.6.1.4.1.2272.1.8.1.8.1.1 | ColumnrcIpConfV2Index | read-only | obsolete | An unique value to identify a physical interface or a logical interface (VLAN). |
| 1.3.6.1.4.1.2272.1.8.1.8.1.2 | ColumnrcIpConfV2Addr | read-only | obsolete | Ip interface address. |
| 1.3.6.1.4.1.2272.1.8.1.8.1.3 | ColumnrcIpConfV2RowStatus | read-write | obsolete | Row status for this entry. |
| 1.3.6.1.4.1.2272.1.8.1.8.1.4 | ColumnrcIpConfV2AdvertDefRte | read-write | obsolete | Used to indicate whether this interface should advertize a RIP default route. |
| 1.3.6.1.4.1.2272.1.8.1.8.1.5 | ColumnrcIpConfV2AcceptDefRte | read-write | obsolete | Used to indicate whether this interface should accept a RIP default route. |
| 1.3.6.1.4.1.2272.1.8.1.8.1.6 | ColumnrcIpConfV2RipEnable | read-write | obsolete | Enable or disable RIP routing on the specified interface. |
| 1.3.6.1.4.1.2272.1.8.1.8.1.7 | ColumnrcIpConfV2OspfEnable | read-write | obsolete | Enable or disable OSPF routing on the specified interface. |
| 1.3.6.1.4.1.2272.1.8.1.8.1.8 | ColumnrcIpConfV2IgmpEnable | read-write | obsolete | Enable or disable IGMP on the specified interface. |
| 1.3.6.1.4.1.2272.1.8.1.8.1.9 | ColumnrcIpConfV2AddrAssigned | read-only | obsolete | Indicate whether IpAddress has been assigned for this interface. |
| 1.3.6.1.4.1.2272.1.8.1.8.1.10 | ColumnrcIpConfV2TriggeredUpdateEnable | read-write | obsolete | Used to indicate whether the RIP triggered update feature should be enabled on this interface. |
| 1.3.6.1.4.1.2272.1.8.1.8.1.11 | ColumnrcIpConfV2RipAutoAggrerateEnable | read-write | obsolete | Used to indicate whether the auto aggregation feature should be enabled on this interface. |
| 1.3.6.1.4.1.2272.1.8.1.8.1.12 | ColumnrcIpConfV2RipGenerateDefaultRoute | read-write | obsolete | Used to indicate whether to generate a default RIP route on this interface. |
| 1.3.6.1.4.1.2272.1.8.1.8.1.13 | ColumnrcIpConfV2AdvertiseWhenDown | read-write | obsolete | The value is used indicated whether vlan state change should be notified to layer 3 or not, provided the vlan is configured as routable interface. Also used fo… |
| 1.3.6.1.4.1.2272.1.8.1.9 | TablercIpConfOspfV2Table | not-accessible | obsolete | A table used to maintain OSPF information for a particular interface. |
| 1.3.6.1.4.1.2272.1.8.1.9.1 | RowrcIpConfOspfV2Entry | not-accessible | obsolete | Entry containing OSPF information. An entry is automatically created in this table when routing is enabled for an interface -or- when an ip address is configur… |
| 1.3.6.1.4.1.2272.1.8.1.9.1.1 | ColumnrcIpConfOspfV2IfIndex | read-only | obsolete | An unique value to identify a physical interface or a logical interface (VLAN). |
| 1.3.6.1.4.1.2272.1.8.1.9.1.2 | ColumnrcIpConfOspfV2IpAddr | read-only | obsolete | IpAddress of the IP interface. |
| 1.3.6.1.4.1.2272.1.8.1.9.1.3 | ColumnrcIpConfOspfV2RtrPriority | read-write | obsolete | The priority of this interface. Used in multi- access networks, this field is used in the designated router election algorithm. The value 0 signifies that the … |
| 1.3.6.1.4.1.2272.1.8.1.9.1.4 | ColumnrcIpConfOspfV2Metric | read-write | obsolete | The metric for this type of service (TOS) on this interface. The default value of the TOS 0 Metric is (10^9 / ifSpeed). The value FFFF means 'no route via this… |
| 1.3.6.1.4.1.2272.1.8.1.9.1.5 | ColumnrcIpConfOspfV2AuthKey | read-write | obsolete | The Authentication Key. If the Area's Authorization Type is simplePassword, and the key length is shorter than 8 octets, the agent will left adjust and zero fi… |
| 1.3.6.1.4.1.2272.1.8.1.9.1.6 | ColumnrcIpConfOspfV2RowStatus | read-write | obsolete | Row status for this entry. |
| 1.3.6.1.4.1.2272.1.8.1.9.1.7 | ColumnrcIpConfOspfV2HelloInterval | read-write | obsolete | The length of time, in seconds, between the Hello packets that the router sends on the interface. This value must be the same for all routers attached to a com… |
| 1.3.6.1.4.1.2272.1.8.1.9.1.8 | ColumnrcIpConfOspfV2RtrDeadInterval | read-write | obsolete | The number of seconds that a router's Hello packets have not been seen before it's neighbors declare the router down. This should be some multiple of the Hello… |
| 1.3.6.1.4.1.2272.1.8.1.9.1.9 | ColumnrcIpConfOspfV2IfAreaId | read-write | obsolete | A 32-bit integer uniquely identifying the area to which the interface connects. Area ID 0.0.0.0 is used for the OSPF backbone. |
| 1.3.6.1.4.1.2272.1.8.1.9.1.10 | ColumnrcIpConfOspfV2AuthType | read-write | obsolete | The authentication type specified for an interface. Additional authentication types may be assigned locally. |
| 1.3.6.1.4.1.2272.1.8.1.10 | TablercIpConfOspfAreaAggregateTable | not-accessible | current | A table used to maintain OSPF summary route metric parameter for a particular Area range. |
| 1.3.6.1.4.1.2272.1.8.1.10.1 | RowrcIpConfOspfAreaAggregateEntry | not-accessible | current | Entry containing OSPF summary route metric parameter for a particular Area range. An entry is automatically created in this table when an area range is configu… |
| 1.3.6.1.4.1.2272.1.8.1.10.1.1 | ColumnrcIpConfOspfAreaAggregateAreaID | read-only | current | The Area the Address Aggregate is to be found within. |
| 1.3.6.1.4.1.2272.1.8.1.10.1.2 | ColumnrcIpConfOspfAreaAggregateLsdbType | read-only | current | The type of the Address Aggregate. This field specifies the Lsdb type that this Address Ag- gregate applies to. |
| 1.3.6.1.4.1.2272.1.8.1.10.1.3 | ColumnrcIpConfOspfAreaAggregateNet | read-only | current | The IP Address of the Net or Subnet indicated by the range. |
| 1.3.6.1.4.1.2272.1.8.1.10.1.4 | ColumnrcIpConfOspfAreaAggregateMask | read-only | current | The Subnet Mask that pertains to the Net or Subnet. |
| 1.3.6.1.4.1.2272.1.8.1.10.1.5 | ColumnrcIpConfOspfAreaAggregateAdvertiseMetric | read-write | current | Used to specify a metric for a Summary LSA (type 3) generated by OSPF through an area range. If this metric is set to 0, OSPF uses the cost to the farthest poi… |
| 1.3.6.1.4.1.2272.1.8.1.10.1.6 | ColumnrcIpConfOspfAreaAggregateEffect | read-write | current | Subnets subsumed by ranges either trigger the advertisement of the indicated aggregate (ad- vertiseMatching), or result in the subnet's not being advertised at… |
| 1.3.6.1.4.1.2272.1.8.1.11 | TablercIpConfRsmltTable | not-accessible | current | A table used to maintain OSPF summary route metric parameter for a particular Area range. |
| 1.3.6.1.4.1.2272.1.8.1.11.1 | RowrcIpConfRsmltEntry | not-accessible | current | Entry containing OSPF summary route metric parameter for a particular Area range. An entry is automatically created in this table when an area range is configu… |
| 1.3.6.1.4.1.2272.1.8.1.11.1.1 | ColumnrcIpConfRsmltIfIndex | read-only | current | Interface Index, this is an index of the table. |
| 1.3.6.1.4.1.2272.1.8.1.11.1.2 | ColumnrcIpConfRsmltHoldDownTimer | read-write | current | Timer value, the range of value is from 0 to 3600. |
| 1.3.6.1.4.1.2272.1.8.1.11.1.3 | ColumnrcIpConfRsmltHoldUpTimer | read-write | current | The range of value 0 to 3600 or 9999. 9999 means infinity. |
| 1.3.6.1.4.1.2272.1.8.1.11.1.4 | ColumnrcIpConfRsmltRowStatus | read-write | current | Row Status. |
| 1.3.6.1.4.1.2272.1.8.1.12 | TablercIpConfBfdTable | not-accessible | current | BFD configuration table |
| 1.3.6.1.4.1.2272.1.8.1.12.1 | RowrcIpConfBfdEntry | not-accessible | current | Used to configure BFD on a particular interface. An entry is created automatically when the variable rcIpConfBfdEnable is set to TRUE. Once created this entry … |
| 1.3.6.1.4.1.2272.1.8.1.12.1.1 | ColumnrcIpConfBfdIfIndex | not-accessible | current | Interface number. The number can represent either a physical or logical(VLAN) interface. |
| 1.3.6.1.4.1.2272.1.8.1.12.1.2 | ColumnrcIpConfBfdMinRxInterval | read-create | current | the min rx interval in milliseconds |
| 1.3.6.1.4.1.2272.1.8.1.12.1.3 | ColumnrcIpConfBfdTxInterval | read-create | current | the desired tx interval in milliseconds |
| 1.3.6.1.4.1.2272.1.8.1.12.1.4 | ColumnrcIpConfBfdMultiplier | read-create | current | the multiplier BFD wait before rx timeout |
| 1.3.6.1.4.1.2272.1.8.1.12.1.5 | ColumnrcIpConfBfdRowStatus | read-create | current | Used to create/delete entries |
| 1.3.6.1.4.1.2272.1.8.1.12.1.6 | ColumnrcIpConfBfdHoldOffInterval | read-create | current | This object specifies the hold off timer interval, in seconds. 0 means that hold off timer is disabled. |
| 1.3.6.1.4.1.2272.1.8.1.12.1.7 | ColumnrcIpConfBfdStaticFlag | read-create | current | This object specifies the static-flag for bfd. When disabled, the static route will go down, when bfd is disabled |
| 1.3.6.1.4.1.2272.1.8.2 | TablercIpAddrTable | not-accessible | current | The table of addressing information relevant to this entity's IP addresses. This table is identical to the ipAddrTable in MIB2 except the columns rcIpAdEntIfIn… |
| 1.3.6.1.4.1.2272.1.8.2.1 | RowrcIpAddrEntry | not-accessible | current | The addressing information for one of this entity's IP addresses. |
| 1.3.6.1.4.1.2272.1.8.2.1.1 | ColumnrcIpAdEntIfIndex | read-only | current | The index value which uniquely identifies the interface to which this entry is applicable. The interface identified by a particular value of this index is the … |
| 1.3.6.1.4.1.2272.1.8.2.1.2 | ColumnrcIpAdEntAddr | read-only | current | The IP address to which this entry's addressing information pertains. |
| 1.3.6.1.4.1.2272.1.8.2.1.3 | ColumnrcIpAdEntNetMask | read-write | current | The subnet mask associated with the IP address of this entry. The value of the mask is an IP address with all the network bits set to 1 and all the hosts bits … |
| 1.3.6.1.4.1.2272.1.8.2.1.4 | ColumnrcIpAdEntBcastAddrFormat | read-only | current | The IP broadcast address format used on this interface. |
| 1.3.6.1.4.1.2272.1.8.2.1.5 | ColumnrcIpAdEntReasmMaxSize | read-only | current | The size of the largest IP datagram which this entity can re-assemble from incoming IP fragmented datagrams received on this interface. |
| 1.3.6.1.4.1.2272.1.8.2.1.6 | ColumnrcIpAdEntRowStatus | read-write | current | Used to create/delete entries |
| 1.3.6.1.4.1.2272.1.8.2.1.7 | ColumnrcIpAdEntVlanId | read-write | current | A value that uniquely identifies the Virtual LAN associated with this entry. This value corresponds to the lower 12 bits in the IEEE 802.1Q VLAN Tag. |
| 1.3.6.1.4.1.2272.1.8.2.1.8 | ColumnrcIpAdEntBrouterPort | read-only | current | Used to indicate whether this entry correponds to a brouter port (as oppose to a routable VLAN). This value cannot be changed after the row is created. |
| 1.3.6.1.4.1.2272.1.8.2.1.9 | ColumnrcIpAdEntMacOffset | read-write | current | Used to translate the ip address into mac address. The system has 512 mac addresses of which 0-507 are reserved for Boardwalk box. 508-511 is reserved for MG. … |
| 1.3.6.1.4.1.2272.1.8.2.1.10 | ColumnrcIpAdEntIfType | read-only | current | The address entry IfType indicates the type of the interface. In the case of circuit-less-IP there is no association with any ports. In other words, it can be … |
| 1.3.6.1.4.1.2272.1.8.2.1.11 | ColumnrcIpAdEntSecondaryIf | read-write | current | Used to indicate whether this entry correponds to a secondary interface (as oppose to a primary interface). This value cannot be changed after the row is creat… |
| 1.3.6.1.4.1.2272.1.8.2.1.12 | ColumnrcIpAdEntVrfId | read-create | current | The VrfId used in this table is to associate VLANs or Brouter ports to a VRF after the creation of VLANs or Brouter ports. VRFID 0 is reserved for the Administ… |
| 1.3.6.1.4.1.2272.1.8.3 | TablercIpFlowTable | not-accessible | current | IpFlow Table. This table contain entries that correspond to RSVP records in the switching fabric Address Resolution table. A connection that has a matching ent… |
| 1.3.6.1.4.1.2272.1.8.3.1 | RowrcIpFlowEntry | not-accessible | current | Proprietary flow control variables. |
| 1.3.6.1.4.1.2272.1.8.3.1.1 | ColumnrcIpFlowSrcIpAddress | read-only | current | The source IP address of an IP packet. |
| 1.3.6.1.4.1.2272.1.8.3.1.2 | ColumnrcIpFlowSrcIpPort | read-only | current | The source port of an IP packet. A zero value in this field is used as a wildcard value. |
| 1.3.6.1.4.1.2272.1.8.3.1.3 | ColumnrcIpFlowDstIpAddress | read-only | current | The destination IP address of an IP packet. |
| 1.3.6.1.4.1.2272.1.8.3.1.4 | ColumnrcIpFlowDstIpPort | read-only | current | The destination port of an IP packet. A zero value in this field is used as a wildcard value. |
| 1.3.6.1.4.1.2272.1.8.3.1.5 | ColumnrcIpFlowProtocol | read-only | current | The protocol type of an IP packet. A zero value in this field is used as a wildcard value. |
| 1.3.6.1.4.1.2272.1.8.3.1.6 | ColumnrcIpFlowRowStatus | read-write | current | Status of entry. |
| 1.3.6.1.4.1.2272.1.8.4 | NodercIpRouting | |||
| 1.3.6.1.4.1.2272.1.8.4.1 | NodercIpRoutingRedistributeRipToOspf | |||
| 1.3.6.1.4.1.2272.1.8.4.1.1 | ScalarrcIpRoutingRedistributeRipToOspfEnable | read-write | obsolete | Used to indicate whether or not to Redistribute RIP routes to OSPF. |
| 1.3.6.1.4.1.2272.1.8.4.1.2 | ScalarrcIpRoutingRedistributeRipToOspfExplicitMetric | read-write | obsolete | Value of metric that is used to translate the RIP route to OSPF. |
| 1.3.6.1.4.1.2272.1.8.4.1.3 | ScalarrcIpRoutingRedistributeRipToOspfUseExplicitMetric | read-write | obsolete | Used to indicate whether or not to use the user specified default metric for redistributing RIP routes to OSPF. |
| 1.3.6.1.4.1.2272.1.8.4.1.4 | ScalarrcIpRoutingRedistributeRipToOspfExternalMetricType | read-write | obsolete | Used to configure the metric type of the distributed routes to OSPF domain. type1 means the metric is comparable directly to the link state metric (cost = inte… |
| 1.3.6.1.4.1.2272.1.8.4.2 | NodercIpRoutingRedistributeOspfToRip | |||
| 1.3.6.1.4.1.2272.1.8.4.2.1 | ScalarrcIpRoutingRedistributeOspfToRipEnable | read-write | obsolete | Used to indicate whether or not to redistribute OSPF routes to RIP. |
| 1.3.6.1.4.1.2272.1.8.4.2.2 | ScalarrcIpRoutingRedistributeOspfToRipExplicitMetric | read-write | obsolete | Value of metric that is used to translate the OSPF route to RIP. |
| 1.3.6.1.4.1.2272.1.8.4.2.3 | ScalarrcIpRoutingRedistributeOspfToRipUseExplicitMetric | read-write | obsolete | Used to indicate whether or not to use the user specified default metric for redistributing OSPF routes to RIP. |
| 1.3.6.1.4.1.2272.1.8.4.3 | NodercIpRoutingRedistributeDirectToOspf | |||
| 1.3.6.1.4.1.2272.1.8.4.3.1 | ScalarrcIpRoutingRedistributeDirectToOspfEnable | read-write | obsolete | Used to indicate whether directly connected networks through non-ospf interfaces are distributed to OSPF database or not. If set to true all the static routes … |
| 1.3.6.1.4.1.2272.1.8.4.3.2 | ScalarrcIpRoutingRedistributeDirectToOspfMethod | read-write | obsolete | Used to indicate whether or not to use the user specified default metric for redistributing direct routes to OSPF. |
| 1.3.6.1.4.1.2272.1.8.4.3.3 | ScalarrcIpRoutingRedistributeDirectToOspfExplicitMetric | read-write | obsolete | Value of metric that is used to translate the routes to directly connected networks to OSPF. |
| 1.3.6.1.4.1.2272.1.8.4.3.4 | ScalarrcIpRoutingRedistributeDirectToOspfExternalMetricType | read-write | obsolete | Used to configure the metric type of the distributed routes to OSPF domain. type1 means the metric is comparable directly to the link state metric (cost = inte… |
| 1.3.6.1.4.1.2272.1.8.4.4 | NodercIpRoutingRedistributeStaticToOspf | |||
| 1.3.6.1.4.1.2272.1.8.4.4.1 | ScalarrcIpRoutingRedistributeStaticToOspfEnable | read-write | obsolete | Used to indicate whether static routes (that are configured locally through management protocol) are distributed to OSPF database or not. If set to true all th… |
| 1.3.6.1.4.1.2272.1.8.4.4.2 | ScalarrcIpRoutingRedistributeStaticToOspfExplicitMetric | read-write | obsolete | Value of metric that is used to translate the static routes to OSPF. |
| 1.3.6.1.4.1.2272.1.8.4.4.3 | ScalarrcIpRoutingRedistributeStaticToOspfUseExplicitMetric | read-write | obsolete | Used to indicate whether or not to use the user specified default metric for redistributing static routes to OSPF. |
| 1.3.6.1.4.1.2272.1.8.4.4.4 | ScalarrcIpRoutingRedistributeStaticToOspfExternalMetricType | read-write | obsolete | Used to configure the metric type of the distributed routes to OSPF domain. type1 means the metric is comparable directly to the link state metric (cost = inte… |
| 1.3.6.1.4.1.2272.1.8.4.4.5 | ScalarrcIpRoutingRedistributeStaticToOspfAdvertDefRte | read-write | obsolete | Used to indicate whether default route (that are configured locally through management protocol) should be distributed to OSPF database or not. If set to true … |
| 1.3.6.1.4.1.2272.1.8.4.5 | NodercIpRoutingRedistributeDirectToRip | |||
| 1.3.6.1.4.1.2272.1.8.4.5.1 | ScalarrcIpRoutingRedistributeDirectToRipEnable | read-write | obsolete | Used to indicate whether directly connected networks through non-rip interfaces are distributed to RIP or not. |
| 1.3.6.1.4.1.2272.1.8.4.6 | NodercIpRoutingRedistributeStaticToRip | |||
| 1.3.6.1.4.1.2272.1.8.4.6.1 | ScalarrcIpRoutingRedistributeStaticToRipEnable | read-write | obsolete | Used to indicate whether static routes (that are configured locally through management protocol) are distributed to RIP database or not. If set to true all the… |
| 1.3.6.1.4.1.2272.1.8.4.7 | NodercIpRoutingNumRoutesScalars | |||
| 1.3.6.1.4.1.2272.1.8.4.7.1 | ScalarrcIpRoutingNumRoutesMaximumTotal | read-write | obsolete | The maximum total number of routes allowed. |
| 1.3.6.1.4.1.2272.1.8.4.7.2 | ScalarrcIpRoutingNumRoutesMaximumLocal | read-write | obsolete | The maximum number of local routes allowed. |
| 1.3.6.1.4.1.2272.1.8.4.7.3 | ScalarrcIpRoutingNumRoutesMaximumStatic | read-write | obsolete | The maximum number of static routes allowed. |
| 1.3.6.1.4.1.2272.1.8.4.7.4 | ScalarrcIpRoutingNumRoutesCurrentTotal | read-write | obsolete | The current total number of routes. |
| 1.3.6.1.4.1.2272.1.8.4.7.5 | ScalarrcIpRoutingNumRoutesCurrentLocal | read-write | obsolete | The current number of local routes. |
| 1.3.6.1.4.1.2272.1.8.4.7.6 | ScalarrcIpRoutingNumRoutesCurrentStatic | read-write | obsolete | The current number of static routes. |
| 1.3.6.1.4.1.2272.1.8.4.8 | TablercIpSourceInterfaceTable | not-accessible | current | Table used to maintain source address information. |
| 1.3.6.1.4.1.2272.1.8.4.8.1 | RowrcIpSourceInterfaceEntry | not-accessible | current | An entry of Ip Source Interface Table. |
| 1.3.6.1.4.1.2272.1.8.4.8.1.1 | ColumnrcIpSourceInterfaceAppId | not-accessible | current | The application which can be set to use a specific interface as source IP address in packets sent from the switch. |
| 1.3.6.1.4.1.2272.1.8.4.8.1.2 | ColumnrcIpSourceInterfaceType | read-write | current | The type of source address used. |
| 1.3.6.1.4.1.2272.1.8.4.8.1.3 | ColumnrcIpSourceInterfaceId | read-write | current | The ID of the interface used as source address. An ID of 0 means no interface is currently set for this entry. |
| 1.3.6.1.4.1.2272.1.8.5 | TablercIpConfIgmpTable | not-accessible | obsolete | A table used to maintain IGMP information for a particular interface. |
| 1.3.6.1.4.1.2272.1.8.5.1 | RowrcIpConfIgmpEntry | not-accessible | obsolete | Entry containing IGMP information. An entry is automatically created in this table when routing is enabled for an interface -or- when an ip address is configur… |
| 1.3.6.1.4.1.2272.1.8.5.1.1 | ColumnrcIpConfIgmpIfIndex | read-only | obsolete | An unique value to identify a physical interface or a logical interface (VLAN). |
| 1.3.6.1.4.1.2272.1.8.5.1.2 | ColumnrcIpConfIgmpQueryInterval | read-write | obsolete | The frequency at which IGMP Host-Query packets are transmitted on this interface. |
| 1.3.6.1.4.1.2272.1.8.5.1.3 | ColumnrcIpConfIgmpVersion | read-write | obsolete | The version of IGMP which is running on this interface. This object can be used to configure a router capable of running either value. For IGMP to function cor… |
| 1.3.6.1.4.1.2272.1.8.5.1.4 | ColumnrcIpConfIgmpQueryMaxResponseTime | read-write | obsolete | The maximum query response time advertised in IGMPv2 queries on this interface. Smaller values allow a router to prune groups faster. |
| 1.3.6.1.4.1.2272.1.8.5.1.5 | ColumnrcIpConfIgmpQuerierPresentTimeout | read-write | obsolete | A timeout interval. If no IGMPv2 queries are heard on this interface within this timeout interval, the local router will take over the Querier on the IP subnet… |
| 1.3.6.1.4.1.2272.1.8.5.1.6 | ColumnrcIpConfIgmpLeaveEnabled | read-write | obsolete | An indication of whether the processing of IGMPv2 Leave messages is enabled on this interface. |
| 1.3.6.1.4.1.2272.1.8.5.1.7 | ColumnrcIpConfIgmpRowStatus | read-write | obsolete | Status of entry. |
| 1.3.6.1.4.1.2272.1.8.5.1.8 | ColumnrcIpConfIgmpRobustness | read-write | obsolete | lossiness of network. |
| 1.3.6.1.4.1.2272.1.8.5.1.9 | ColumnrcIpConfIgmpLastMemberQueryInterval | read-write | obsolete | max response in GrpSpec Query. |
| 1.3.6.1.4.1.2272.1.8.5.1.10 | ColumnrcIpConfIgmpSnoopEnable | read-write | obsolete | Enable snoop. |
| 1.3.6.1.4.1.2272.1.8.5.1.11 | ColumnrcIpConfIgmpProxySnoopEnable | read-write | obsolete | Enable proxy snoop. |
| 1.3.6.1.4.1.2272.1.8.6 | TablercIgmpGroupTable | not-accessible | obsolete | The (conceptual) table listing the multicast groups configured in the device. |
| 1.3.6.1.4.1.2272.1.8.6.1 | RowrcIgmpGroupEntry | not-accessible | obsolete | An entry (conceptual row) representing an Igmp group. |
| 1.3.6.1.4.1.2272.1.8.6.1.1 | ColumnrcIgmpGroupIpAddress | read-only | obsolete | Multicast group Address (Class D) that others want to join. A group address can be the same for many incoming ports. |
| 1.3.6.1.4.1.2272.1.8.6.1.2 | ColumnrcIgmpGroupMembers | read-only | obsolete | IP Address of a source that has sent group report wishing to join this group. |
| 1.3.6.1.4.1.2272.1.8.6.1.3 | ColumnrcIgmpGroupInPort | read-only | obsolete | An unique value to identify a physical interface or a logical interface (VLAN), which has received Group reports from various sources. |
| 1.3.6.1.4.1.2272.1.8.6.1.4 | ColumnrcIgmpGroupExpiration | read-only | obsolete | Time left before the group report expired on this port. Only one of this variable port. This variable is updated upon receiving a group report. |
| 1.3.6.1.4.1.2272.1.8.6.1.5 | ColumnrcIgmpGroupIfIndex | read-only | obsolete | An unique value to identify a physical interface or a logical interface (VLAN), which has received Group reports from various sources. |
| 1.3.6.1.4.1.2272.1.8.6.1.6 | ColumnrcIgmpGroupUserId | read-only | obsolete | User-id sending this group |
| 1.3.6.1.4.1.2272.1.8.6.1.7 | ColumnrcIgmpGroupMemberState | read-only | obsolete | Used for IGAP, to indicated member state. |
| 1.3.6.1.4.1.2272.1.8.6.1.8 | ColumnrcIgmpGroupSessionTime | read-only | obsolete | Used for IGAP, to indicated the session time in seconds for the member. Session time is started after traffic is available to member. It can be also called Acc… |
| 1.3.6.1.4.1.2272.1.8.7 | TablercIpRouteTable | not-accessible | current | This entity's IP Routing table. |
| 1.3.6.1.4.1.2272.1.8.7.1 | RowrcIpRouteEntry | not-accessible | current | A route to a particular destination. |
| 1.3.6.1.4.1.2272.1.8.7.1.1 | ColumnrcIpRouteDest | read-only | current | The destination IP address of this route. An entry with a value of 0.0.0.0 is considered a default route. Multiple routes to a single destination can appear in… |
| 1.3.6.1.4.1.2272.1.8.7.1.2 | ColumnrcIpRouteMask | read-only | current | Indicate the mask to be logical-ANDed with the destination address before being compared to the value in the rcIpRouteDest field. For those systems that do not… |
| 1.3.6.1.4.1.2272.1.8.7.1.3 | ColumnrcIpRouteNextHop | read-write | current | The IP address of the next hop of this route. (In the case of a route bound to an interface which is realized via a broadcast media, the value of this field is… |
| 1.3.6.1.4.1.2272.1.8.7.1.4 | ColumnrcIpRouteMetric | read-write | current | The primary routing metric for this route. The semantics of this metric are determined by the routing-protocol specified in the route's rcIpRouteProto value. I… |
| 1.3.6.1.4.1.2272.1.8.7.1.5 | ColumnrcIpRouteIfIndex | read-only | current | The index value which uniquely identifies the local interface through which the next hop of this route should be reached. The interface identified by a particu… |
| 1.3.6.1.4.1.2272.1.8.7.1.6 | ColumnrcIpRouteType | read-only | current | The type of route. |
| 1.3.6.1.4.1.2272.1.8.7.1.7 | ColumnrcIpRouteProto | read-only | current | The routing mechanism via which this route was learned. Inclusion of values for gateway routing protocols is not intended to imply that hosts should support th… |
| 1.3.6.1.4.1.2272.1.8.7.1.8 | ColumnrcIpRouteAge | read-only | current | The number of seconds since this route was last updated or otherwise determined to be correct. Note that no semantics of `too old' can be implied except throug… |
| 1.3.6.1.4.1.2272.1.8.7.1.9 | ColumnrcIpRouteRowStatus | read-write | current | Used to create/delete entries |
| 1.3.6.1.4.1.2272.1.8.7.1.10 | ColumnrcIpRoutePref | read-only | current | |
| 1.3.6.1.4.1.2272.1.8.7.1.11 | ColumnrcIpRouteAltSequence | read-only | current | Alternative Route Sequence. 0 denotes Best Route. |
| 1.3.6.1.4.1.2272.1.8.7.1.12 | ColumnrcIpRoutePathType | read-only | current | The type of route. It is a combination of direct, indirect, best, alternative and ECMP path. |
| 1.3.6.1.4.1.2272.1.8.7.1.13 | ColumnrcIpRouteSrcVrfId | read-write | current | srcVrfId of the next-hop address |
| 1.3.6.1.4.1.2272.1.8.7.1.14 | ColumnrcIpRouteNextHopId | read-only | current | Identifier of the next-hop, hostname or mac adress. |
| 1.3.6.1.4.1.2272.1.8.7.1.15 | ColumnrcIpRouteLayer3VirtualInterfaceType | read-only | current | Identifies type for value specified in the rcIpRouteLayer3VirtualInterface field. |
| 1.3.6.1.4.1.2272.1.8.7.1.16 | ColumnrcIpRouteLayer3VirtualInterface | read-only | current | Identifier of the Layer3 Virtual Interface. When the value is an SPB I-SID, 0 denotes GlobalRouter and -1 denotes not applicable to route. |
| 1.3.6.1.4.1.2272.1.8.8 | TablercIpConfDhcpTable | not-accessible | current | DHCP configuration table |
| 1.3.6.1.4.1.2272.1.8.8.1 | RowrcIpConfDhcpEntry | not-accessible | current | Used to configure DHCP on a particular port. An entry is created automatically when the variable rcIpConfDhcpEnable is set to TRUE. Once created this entry wil… |
| 1.3.6.1.4.1.2272.1.8.8.1.1 | ColumnrcIpConfDhcpIfIndex | read-only | current | Interface number. The number can represent either a physical or logical(VLAN) interface. |
| 1.3.6.1.4.1.2272.1.8.8.1.2 | ColumnrcIpConfDhcpMaxHop | read-write | current | Used to indicate the maximum number of hops a DHCP packet can take from the source device to the destination device (i.e., DHCP client to DHCP server). |
| 1.3.6.1.4.1.2272.1.8.8.1.3 | ColumnrcIpConfDhcpMinSec | read-write | current | Used to indicate the minimum number of seconds to wait between receiving a DHCP packet and actually forwarding the DHCP packet to the destination device. A val… |
| 1.3.6.1.4.1.2272.1.8.8.1.4 | ColumnrcIpConfDhcpMode | read-write | current | Used to indicate what type of DHCP packets this interface should support. A value of none(1) will result in all incoming DHCP and BOOTP packets to be dropped. |
| 1.3.6.1.4.1.2272.1.8.8.1.5 | ColumnrcIpConfDhcpRowStatus | read-write | current | An entry is created automatically when the variable rcIpConfDhcpEnable is set to TRUE. Once created this entry will only be deleted if the rcIpConfDhcpRowStatu… |
| 1.3.6.1.4.1.2272.1.8.8.1.6 | ColumnrcIpConfDhcpNumRequests | read-only | current | The total number of DHCP requests seen on this interface. |
| 1.3.6.1.4.1.2272.1.8.8.1.7 | ColumnrcIpConfDhcpNumReplies | read-only | current | The total number of DHCP replies seen on this interface. |
| 1.3.6.1.4.1.2272.1.8.8.1.8 | ColumnrcIpConfDhcpAlwaysBroadcast | read-write | current | Used to indicate if DHCP Reply packets should be broadcast to the DHCP client on this interface. |
| 1.3.6.1.4.1.2272.1.8.8.1.9 | ColumnrcIpConfDhcpClearCounters | read-write | current | This object is used to clear the DHCP counters in an entry. When set to clear(1), the values of the counter objects in the entry will be reset to 0. When read,… |
| 1.3.6.1.4.1.2272.1.8.8.1.10 | ColumnrcIpConfDhcpCounterClearTime | read-only | current | This object indicates the time at which the counter values in this entry were last reset to 0. |
| 1.3.6.1.4.1.2272.1.8.8.1.11 | ColumnrcIpConfDhcpCircuitId | read-write | current | Used to indicate if DHCP packets should have option82 circuitId info inserted before sent to servers, for this interface. |
| 1.3.6.1.4.1.2272.1.8.8.1.12 | ColumnrcIpConfDhcpRemoteId | read-write | current | Used to indicate if DHCP packets should have option82 remoteId info inserted before sent to servers, for this interface. |
| 1.3.6.1.4.1.2272.1.8.8.1.13 | ColumnrcIpConfDhcpTrusted | read-write | current | Used to indicate if DHCP packets come through a trusted dhcp circuit. This means that packets with giaddr set to 0 having option82 in it, will be forwarded if … |
| 1.3.6.1.4.1.2272.1.8.8.1.14 | ColumnrcIpConfDhcpAgentAddr | read-only | current | The IP address configured as relay on this interface; it is either the IP of the physical interface or the IP of the VRRP address |
| 1.3.6.1.4.1.2272.1.8.9 | TablercIpDhcpForwardTable | not-accessible | current | DHCP forwarding table. |
| 1.3.6.1.4.1.2272.1.8.9.1 | RowrcIpDhcpForwardEntry | not-accessible | current | An entry used represents a DHCP forwarding directive. |
| 1.3.6.1.4.1.2272.1.8.9.1.1 | ColumnrcIpDhcpForwardAgentAddr | read-only | current | The IP address configured on an interface (i.e., a locally configured IP address). |
| 1.3.6.1.4.1.2272.1.8.9.1.2 | ColumnrcIpDhcpForwardServerAddr | read-only | current | The IP address of the DHCP server. If this IP address corresponds to a locally configured IP network, the DHCP packet is broadcasted out the interface the IP a… |
| 1.3.6.1.4.1.2272.1.8.9.1.3 | ColumnrcIpDhcpForwardEnable | read-write | current | Used to indicate whether this entry should be used. |
| 1.3.6.1.4.1.2272.1.8.9.1.4 | ColumnrcIpDhcpForwardMode | read-write | current | Used to indicate whether this entry pertains to BOOTP packets, DHCP packets, or both. |
| 1.3.6.1.4.1.2272.1.8.9.1.5 | ColumnrcIpDhcpForwardRowStatus | read-write | current | Row status of this entry. |
| 1.3.6.1.4.1.2272.1.8.10 | NodercIpFilter | |||
| 1.3.6.1.4.1.2272.1.8.10.1 | ScalarrcIpFilterFilterTableSize | read-only | current | Used to indicate the number of entries in the rcIpFilterTable. |
| 1.3.6.1.4.1.2272.1.8.10.2 | ScalarrcIpFilterGlobalListTableSize | read-only | current | Used to indicate the number of entries in the rcIpFilterGlobalListTable. |
| 1.3.6.1.4.1.2272.1.8.10.3 | ScalarrcIpFilterBaseListTableSize | read-only | current | Used to indicate the number of entries in the rcIpFilterBaseListTable. |
| 1.3.6.1.4.1.2272.1.8.10.4 | ScalarrcIpFilterPortTableSize | read-only | current | Used to indicate the number of entries in the rcIpFilterPortTable. |
| 1.3.6.1.4.1.2272.1.8.10.5 | ScalarrcIpFilterNextAvailFilterId | read-only | current | next available filter-id in the rcIpFilterPortTable. |
| 1.3.6.1.4.1.2272.1.8.10.20 | TablercIpFilterTable | not-accessible | current | A table containing IP filters. |
| 1.3.6.1.4.1.2272.1.8.10.20.1 | RowrcIpFilterEntry | not-accessible | current | IP filter attributes. The system supports a vast array of filter options. Each of these options are supported in this entry. If a particular option is not used… |
| 1.3.6.1.4.1.2272.1.8.10.20.1.1 | ColumnrcIpFilterType | read-only | current | Used to indicate a particular type of filter. A 'global' filter is a filter that is applied to all packets irregardless of the packet's source or destination I… |
| 1.3.6.1.4.1.2272.1.8.10.20.1.2 | ColumnrcIpFilterDstAddr | read-only | current | Destination IP address to filter on. |
| 1.3.6.1.4.1.2272.1.8.10.20.1.3 | ColumnrcIpFilterDstMask | read-only | current | Destination IP subnet mask to filter on. |
| 1.3.6.1.4.1.2272.1.8.10.20.1.4 | ColumnrcIpFilterSrcAddr | read-only | current | Source IP address to filter on. |
| 1.3.6.1.4.1.2272.1.8.10.20.1.5 | ColumnrcIpFilterSrcMask | read-only | current | Source IP subnet mask to filter on. |
| 1.3.6.1.4.1.2272.1.8.10.20.1.6 | ColumnrcIpFilterId | read-only | current | This filter's unique identifier(id). This id is automatically generated by the system when a filter is created. This id is used in the 'rcIpFilterGlobalListTab… |
| 1.3.6.1.4.1.2272.1.8.10.20.1.7 | ColumnrcIpFilterName | read-write | current | This filter's name. |
| 1.3.6.1.4.1.2272.1.8.10.20.1.8 | ColumnrcIpFilterProtocolType | read-write | current | Type of protocol to filter on. |
| 1.3.6.1.4.1.2272.1.8.10.20.1.9 | ColumnrcIpFilterSrcPort | read-write | current | TCP/UDP source port to filter on. |
| 1.3.6.1.4.1.2272.1.8.10.20.1.10 | ColumnrcIpFilterSrcOption | read-write | current | Type of matching to perform on the field 'rcIpFilterSrcPort'. For 'source' and 'destination' filters, this value can only be 'equal(1)'. |
| 1.3.6.1.4.1.2272.1.8.10.20.1.11 | ColumnrcIpFilterDstPort | read-write | current | TCP/UDP destination port to filter on. |
| 1.3.6.1.4.1.2272.1.8.10.20.1.12 | ColumnrcIpFilterDstOption | read-write | current | Type of matching to perform on the field 'rcIpFilterDstPort'. For 'source' and 'destination' filters, this value can only be 'equal(1)'. |
| 1.3.6.1.4.1.2272.1.8.10.20.1.13 | ColumnrcIpFilterCopyToCpu | read-write | obsolete | Used to specify whether a packet matching this filter should be copied to the CPU. |
| 1.3.6.1.4.1.2272.1.8.10.20.1.14 | ColumnrcIpFilterMirror | read-write | current | Used to specify whether a packet matching this filter should be mirrored to the port specified by 'rcMirrorByPortMirrorPort'. |
| 1.3.6.1.4.1.2272.1.8.10.20.1.15 | ColumnrcIpFilterHighPriority | read-write | obsolete | Used to specify whether a packet matching this filter should be forwarded with high priority. |
| 1.3.6.1.4.1.2272.1.8.10.20.1.16 | ColumnrcIpFilterTcpConnect | read-write | current | Used to specify whether a TCP packet matching this filter should be accepted. Pass only those matching TCP packets with either the ACK bit or RST bit set. Appl… |
| 1.3.6.1.4.1.2272.1.8.10.20.1.17 | ColumnrcIpFilterIeeeVlanPriority | read-write | current | Used to specify the priority bits for explicit IEEE VLAN tag for a packet matching this filter. If this priority bit field is greater than the priority field c… |
| 1.3.6.1.4.1.2272.1.8.10.20.1.18 | ColumnrcIpFilterUsePktLimit | read-write | obsolete | Used to specify whether the 'rcIpFilterPktLimit' field in this entry should be used when applying this filter. |
| 1.3.6.1.4.1.2272.1.8.10.20.1.19 | ColumnrcIpFilterPktLimit | read-write | obsolete | The maximum packet size limit to filter against. |
| 1.3.6.1.4.1.2272.1.8.10.20.1.20 | ColumnrcIpFilterRowStatus | read-write | current | Row status of this entry. |
| 1.3.6.1.4.1.2272.1.8.10.20.1.21 | ColumnrcIpFilterMode | read-write | current | Used to specify the operation mode for this entry. 'useDefaultAction' means use the setting specified in the 'rcIpFilterPortDefaultAction' variable. 'forward' … |
| 1.3.6.1.4.1.2272.1.8.10.20.1.22 | ColumnrcIpFilterIpTosRule | read-write | obsolete | Used to specify the operation mode for this entry. 'none' means do not manupulate the Ip ToS byte. 'ipTosRule1' means manipulate the Ip ToS byte according to Q… |
| 1.3.6.1.4.1.2272.1.8.10.20.1.23 | ColumnrcIpFilterStopOnMatch | read-write | current | Used to stop further filtering if this filter is applied. |
| 1.3.6.1.4.1.2272.1.8.10.20.1.24 | ColumnrcIpFilterDiffServMatchIeee8021PEnable | read-write | current | Used to specify whether the value stored in the variable 'rcIpFilterDiffServMatchIeee8021P' should be used in this filter. |
| 1.3.6.1.4.1.2272.1.8.10.20.1.25 | ColumnrcIpFilterDiffServMatchIeee8021P | read-write | current | Used to specify the match value for the 802.1P field. If the 802.1P field in the incoming packet matches this value, then this filter will be applied to the pa… |
| 1.3.6.1.4.1.2272.1.8.10.20.1.26 | ColumnrcIpFilterDiffServMatchDscpEnable | read-write | current | Used to specify whether the values stored in the variable 'rcIpFilterDiffServMatchDscp' and 'rcIpFilterDiffServMatchDscpReserved' should be used in this filter. |
| 1.3.6.1.4.1.2272.1.8.10.20.1.27 | ColumnrcIpFilterDiffServMatchDscp | read-write | current | Used to specify the match value for the DSCP. If the DSCP in the incoming packet matches this value, then this filter will be applied to the packet. The DSCP r… |
| 1.3.6.1.4.1.2272.1.8.10.20.1.28 | ColumnrcIpFilterDiffServMatchDscpReserved | read-write | current | Used to specify the match value of the low-order 2 bits of the TOS byte (in network order). |
| 1.3.6.1.4.1.2272.1.8.10.20.1.29 | ColumnrcIpFilterDiffServModifyIeee8021PEnable | read-write | current | Used to specify whether the value stored in the variable 'rcIpFilterDiffServModifyIeee8021P' should be used in this filter. |
| 1.3.6.1.4.1.2272.1.8.10.20.1.30 | ColumnrcIpFilterDiffServModifyIeee8021P | read-write | current | Used to specify the value the 802.1P field should be modified to if this filter is applied. The modification is applied at the egress point. |
| 1.3.6.1.4.1.2272.1.8.10.20.1.31 | ColumnrcIpFilterDiffServModifyDscpEnable | read-write | current | Used to specify whether the value stored in the variable 'rcIpFilterDiffServModifyDscp' should be used in this filter. |
| 1.3.6.1.4.1.2272.1.8.10.20.1.32 | ColumnrcIpFilterDiffServModifyDscp | read-write | current | Used to specify what the value of the DSCP should be modified to if this filter is applied. The modification is applied at the egress point. The DSCP represent… |
| 1.3.6.1.4.1.2272.1.8.10.20.1.33 | ColumnrcIpFilterDiffServModifyDscpReserved | read-write | current | Used to specify the modify value of the low-order 2 bits of the TOS byte (in network order). |
| 1.3.6.1.4.1.2272.1.8.10.20.1.34 | ColumnrcIpFilterDiffServTrafficProfileId | read-write | current | Used to specify which traffic profile should be applied to packets matching this filter. Traffic profiles are specified in the 'rc2kQosTrafficProfileTable' tab… |
| 1.3.6.1.4.1.2272.1.8.10.20.1.35 | ColumnrcIpFilterMatchIcmpRequest | read-write | current | Used to specify whether matching on ICMP Request packets should be performed. |
| 1.3.6.1.4.1.2272.1.8.10.20.1.36 | ColumnrcIpFilterMatchIpFragment | read-write | current | Used to specify whether matching on fragmented IP packets should be performed. |
| 1.3.6.1.4.1.2272.1.8.10.20.1.37 | ColumnrcIpFilterStatisticEnable | read-write | current | Used to turn on/off Counters for this filter. |
| 1.3.6.1.4.1.2272.1.8.10.20.1.38 | ColumnrcIpFilterInOctets | read-only | obsolete | The number of In-Octets for this filter. |
| 1.3.6.1.4.1.2272.1.8.10.20.1.39 | ColumnrcIpFilterInPackets | read-only | obsolete | The number of In-Packets for this filter. |
| 1.3.6.1.4.1.2272.1.8.10.20.1.40 | ColumnrcIpFilterRateLimitDiscardPackets | read-only | obsolete | The number of packets discarded due to rate limiting. |
| 1.3.6.1.4.1.2272.1.8.10.20.1.41 | ColumnrcIpFilterNextHopForwardIpAddr | read-write | current | Next hop forward Ip address. |
| 1.3.6.1.4.1.2272.1.8.10.20.1.42 | ColumnrcIpFilterNextHopUnreachableDropEnable | read-write | current | If next hop is unreachalbe, enable/disable to drop the packet. |
| 1.3.6.1.4.1.2272.1.8.10.20.1.43 | ColumnrcIpFilterProtocolTypeUsrDefined | read-write | current | When rcIpFilterProtocolType is set to usrDefined(256) in an IP Filter, this field represents the 8-bit user defined protocol identifier. |
| 1.3.6.1.4.1.2272.1.8.10.20.1.44 | ColumnrcIpFilterIngressOctets | read-only | current | The number of In-Octets for this filter. |
| 1.3.6.1.4.1.2272.1.8.10.20.1.45 | ColumnrcIpFilterIngressPkts | read-only | current | The number of In-Packets for this filter. |
| 1.3.6.1.4.1.2272.1.8.10.20.1.46 | ColumnrcIpFilterRateLimitDiscardPkts | read-only | current | The number of packets discarded due to rate limiting. |
| 1.3.6.1.4.1.2272.1.8.10.21 | TablercIpFilterGlobalListTable | not-accessible | current | A table used to store global filter list information. Each row in the table contains a set of individual filters that make up a particular filter list. |
| 1.3.6.1.4.1.2272.1.8.10.21.1 | RowrcIpFilterGlobalListEntry | not-accessible | current | Global filter list attributes. |
| 1.3.6.1.4.1.2272.1.8.10.21.1.1 | ColumnrcIpFilterGlobalListId | read-only | current | An unique value to identify a particular global filter list. |
| 1.3.6.1.4.1.2272.1.8.10.21.1.2 | ColumnrcIpFilterGlobalListName | read-write | current | Name of this filter list. |
| 1.3.6.1.4.1.2272.1.8.10.21.1.3 | ColumnrcIpFilterGlobalListFilterIdListSize | read-only | current | Used to indicate the number of filters are associated with this filter list. |
| 1.3.6.1.4.1.2272.1.8.10.21.1.4 | ColumnrcIpFilterGlobalListFilterIdList | read-write | current | Used to indicate zero or more filters that are associated with this filter list. Each filter identifier is stored as two bytes in this array starting from offs… |
| 1.3.6.1.4.1.2272.1.8.10.21.1.5 | ColumnrcIpFilterGlobalListRowStatus | read-write | current | Row status of this entry. |
| 1.3.6.1.4.1.2272.1.8.10.21.1.6 | ColumnrcIpFilterGlobalListMemberPorts | read-only | current | Ports filter is used on. |
| 1.3.6.1.4.1.2272.1.8.10.22 | TablercIpFilterBaseListTable | not-accessible | current | A table used to store base filter list information. Each row in the table contains a set of individual filters that make up a particular filter list. |
| 1.3.6.1.4.1.2272.1.8.10.22.1 | RowrcIpFilterBaseListEntry | not-accessible | current | Base filter list attributes. |
| 1.3.6.1.4.1.2272.1.8.10.22.1.1 | ColumnrcIpFilterBaseListId | read-only | current | An unique value to identify a particular base filter list. |
| 1.3.6.1.4.1.2272.1.8.10.22.1.2 | ColumnrcIpFilterBaseListName | read-write | current | Name of this filter list. |
| 1.3.6.1.4.1.2272.1.8.10.22.1.3 | ColumnrcIpFilterBaseListFilterIdListSize | read-only | current | Used to indicate the number of filters are associated with this filter list. |
| 1.3.6.1.4.1.2272.1.8.10.22.1.4 | ColumnrcIpFilterBaseListFilterIdList | read-write | current | Used to indicate zero or more filters that are associated with this filter list. Each filter identifier is stored as two bytes in this array starting from offs… |
| 1.3.6.1.4.1.2272.1.8.10.22.1.5 | ColumnrcIpFilterBaseListRowStatus | read-write | current | Row status of this entry. |
| 1.3.6.1.4.1.2272.1.8.10.22.1.6 | ColumnrcIpFilterBaseListMemberPorts | read-only | current | Ports filter is used on. |
| 1.3.6.1.4.1.2272.1.8.10.23 | TablercIpFilterPortTable | not-accessible | current | A table used to store port filtering information. |
| 1.3.6.1.4.1.2272.1.8.10.23.1 | RowrcIpFilterPortEntry | not-accessible | current | Port entry attributes. |
| 1.3.6.1.4.1.2272.1.8.10.23.1.1 | ColumnrcIpFilterPortIfIndex | read-only | current | IfIndex value of a port where filtering is applied. |
| 1.3.6.1.4.1.2272.1.8.10.23.1.2 | ColumnrcIpFilterPortFilterListSize | read-only | current | Used to indicate the number of filter list(s) that are assigned to this port. |
| 1.3.6.1.4.1.2272.1.8.10.23.1.3 | ColumnrcIpFilterPortFilterList | read-write | current | Used to indicate zero or more filter lists that are associated with this port. Each filter list identifier is stored as two bytes in this array starting from o… |
| 1.3.6.1.4.1.2272.1.8.10.23.1.4 | ColumnrcIpFilterPortMode | read-write | obsolete | Used to indicate when filters applied to this port should be treated as 'permit' or 'deny' filters. When filters are not enabled on the port the mode is set to… |
| 1.3.6.1.4.1.2272.1.8.10.23.1.5 | ColumnrcIpFilterPortEnable | read-write | current | Used to indicate whether filtering is configured on this port. |
| 1.3.6.1.4.1.2272.1.8.10.23.1.6 | ColumnrcIpFilterPortRowStatus | read-write | current | Row status of this entry. |
| 1.3.6.1.4.1.2272.1.8.10.23.1.7 | ColumnrcIpFilterPortDefaultAction | read-write | current | Used to indicate the default action that should be performed when an IP filter applies to a particular port. When filters are not enabled on the port the actio… |
| 1.3.6.1.4.1.2272.1.8.10.23.1.8 | ColumnrcIpFilterPortNumGlobalFilters | read-only | current | # of global filters |
| 1.3.6.1.4.1.2272.1.8.10.23.1.9 | ColumnrcIpFilterPortNumBaseFilters | read-only | current | # of base filters |
| 1.3.6.1.4.1.2272.1.8.10.24 | ScalarrcIpFilterMediaDevTableSize | read-only | current | Used to indicate the number of entries in the rcIpFilterMediaDevTable. |
| 1.3.6.1.4.1.2272.1.8.10.25 | TablercIpFilterMediaDevTable | not-accessible | current | A table used to store media filter list information. Each row in the table contains a set of individual filters that make up a particular filter list for a par… |
| 1.3.6.1.4.1.2272.1.8.10.25.1 | RowrcIpFilterMediaDevEntry | not-accessible | current | Device attributes and the filters' attributes. |
| 1.3.6.1.4.1.2272.1.8.10.25.1.1 | ColumnrcIpFilterMediaDevId | read-only | current | Media Id in the rcIpFilterMediaDevTable. |
| 1.3.6.1.4.1.2272.1.8.10.25.1.2 | ColumnrcIpFilterMediaDevName | read-write | current | Media Device Name. This includes the platform and the physical/soft device. |
| 1.3.6.1.4.1.2272.1.8.10.25.1.3 | ColumnrcIpFilterMediaDevPlatformType | read-write | current | Platform identifier or type. These are the currently supported platforms. |
| 1.3.6.1.4.1.2272.1.8.10.25.1.4 | ColumnrcIpFilterMediaDevDeviceType | read-write | current | Device identifier or type. There are the currently supported device types. |
| 1.3.6.1.4.1.2272.1.8.10.25.1.5 | ColumnrcIpFilterMediaDevIpAddress | read-write | current | Media Device IP Address. |
| 1.3.6.1.4.1.2272.1.8.10.25.1.6 | ColumnrcIpFilterMediaDevStreamsIds | read-only | current | An array used to identify which streams are assigned to MediaDevEntry. Each stream ID is stored as a two octet value. The first octet in the pair holds bits 15… |
| 1.3.6.1.4.1.2272.1.8.10.25.1.7 | ColumnrcIpFilterMediaDevMemberPorts | read-only | current | Media Device port port members. These are the system physical ports. |
| 1.3.6.1.4.1.2272.1.8.10.25.1.8 | ColumnrcIpFilterMediaDevStatisticEnable | read-write | current | Used to turn on/off statistics' counters for all the filters for the device. |
| 1.3.6.1.4.1.2272.1.8.10.25.1.9 | ColumnrcIpFilterMediaDevRowStatus | read-write | current | Row Status. |
| 1.3.6.1.4.1.2272.1.8.10.26 | ScalarrcIpFilterMediaStreamTableSize | read-only | current | Used to indicate the number of entries in the rcIpFilterMediaStreamTable. |
| 1.3.6.1.4.1.2272.1.8.10.27 | TablercIpFilterMediaStreamTable | not-accessible | current | A table used to store tcp/udp port information for a set of filters that make up a particular filter list for a particular platform/device combination. |
| 1.3.6.1.4.1.2272.1.8.10.27.1 | RowrcIpFilterMediaStreamEntry | not-accessible | current | Layer 4 Port attributes and the filters' attributes. |
| 1.3.6.1.4.1.2272.1.8.10.27.1.1 | ColumnrcIpFilterMediaStreamMediaId | read-only | current | Media Id in the rcIpFilterMediaDevTable. |
| 1.3.6.1.4.1.2272.1.8.10.27.1.2 | ColumnrcIpFilterMediaStreamStreamId | read-only | current | Port range Id in the rcIpFilterMediaStreamTable. |
| 1.3.6.1.4.1.2272.1.8.10.27.1.3 | ColumnrcIpFilterMediaStreamName | read-write | current | Media Stream Name. |
| 1.3.6.1.4.1.2272.1.8.10.27.1.4 | ColumnrcIpFilterMediaStreamProtocol | read-write | current | Type of transport protocol to filter on. Multimedia applications often use UDP and some use TCP. Any Layer 4 protocol number supported by IP can be added here … |
| 1.3.6.1.4.1.2272.1.8.10.27.1.5 | ColumnrcIpFilterMediaStreamPortMin | read-write | current | TCP/UDP source or destination port to filter on. |
| 1.3.6.1.4.1.2272.1.8.10.27.1.6 | ColumnrcIpFilterMediaStreamPortMax | read-write | current | TCP/UDP source or destination port to filter on. |
| 1.3.6.1.4.1.2272.1.8.10.27.1.7 | ColumnrcIpFilterMediaStreamPortOption | read-write | current | Src port or destination port of both. |
| 1.3.6.1.4.1.2272.1.8.10.27.1.8 | ColumnrcIpFilterMediaStreamType | read-write | current | Type of stream to filter on. |
| 1.3.6.1.4.1.2272.1.8.10.27.1.9 | ColumnrcIpFilterMediaStreamRemarkDscp | read-only | current | Used to specify what the value of the DSCP should be modified to if this stream is identified. The modification is applied at the egress point. The DSCP repres… |
| 1.3.6.1.4.1.2272.1.8.10.27.1.10 | ColumnrcIpFilterMediaStreamMatchDscp | read-write | current | Used to specify what the value of the DSCP should be match with in the stream identification. DSCP represents the high-order 6 bit of the TOS byte (in network … |
| 1.3.6.1.4.1.2272.1.8.10.27.1.11 | ColumnrcIpFilterMediaStreamRowStatus | read-write | current | Row Status. |
| 1.3.6.1.4.1.2272.1.8.11 | NodercIpPolicy | |||
| 1.3.6.1.4.1.2272.1.8.11.1 | ScalarrcIpPolicyAddrTableSize | read-only | obsolete | Used to indicate the number of entries in the rcIpPolicyAddrTable. |
| 1.3.6.1.4.1.2272.1.8.11.2 | TablercIpPolicyAddrTable | not-accessible | obsolete | A table used to store different types list entries. Each row in the table contains a list entry that is used by a set of announce policies. |
| 1.3.6.1.4.1.2272.1.8.11.2.1 | RowrcIpPolicyAddrEntry | not-accessible | obsolete | Route entry attributes. |
| 1.3.6.1.4.1.2272.1.8.11.2.1.1 | ColumnrcIpPolicyAddrIpAddr | read-only | obsolete | The network address for this type of list entry. This value is required for all types of lists. |
| 1.3.6.1.4.1.2272.1.8.11.2.1.2 | ColumnrcIpPolicyAddrId | read-only | obsolete | Identifier of this entry. Used internally to identify this entry. |
| 1.3.6.1.4.1.2272.1.8.11.2.1.3 | ColumnrcIpPolicyAddrAddrListIdListSize | read-only | obsolete | Used to indicate the number of id(s) in the rcIpPolicyAddrListIdList variable. |
| 1.3.6.1.4.1.2272.1.8.11.2.1.4 | ColumnrcIpPolicyAddrAddrListIdList | read-only | obsolete | Used to indicate zero or more rcIpPolicyAddrListEntry(s) that are referring to this entry. Each list-id identifier is stored as two bytes in this array startin… |
| 1.3.6.1.4.1.2272.1.8.11.2.1.5 | ColumnrcIpPolicyAddrRowStatus | read-write | obsolete | Row status of this entry. |
| 1.3.6.1.4.1.2272.1.8.11.3 | ScalarrcIpPolicyNetTableSize | read-only | obsolete | Used to indicate the number of entries in the rcIpPolicyNetTable. |
| 1.3.6.1.4.1.2272.1.8.11.4 | TablercIpPolicyNetTable | not-accessible | obsolete | A table used to store different types list entries. Each row in the table contains a list entry that is used by a set of announce policies. |
| 1.3.6.1.4.1.2272.1.8.11.4.1 | RowrcIpPolicyNetEntry | not-accessible | obsolete | Route entry attributes. |
| 1.3.6.1.4.1.2272.1.8.11.4.1.1 | ColumnrcIpPolicyNetAddr | read-only | obsolete | The network address for this type of list entry. This value is required for all types of lists. |
| 1.3.6.1.4.1.2272.1.8.11.4.1.2 | ColumnrcIpPolicyNetMask | read-only | obsolete | The route mask for this type of list entry. This value is meaningful only if rcIpPolicyNetEntry is equal to exactNet(1), rangeNet(2), advertiseNet(3). For othe… |
| 1.3.6.1.4.1.2272.1.8.11.4.1.3 | ColumnrcIpPolicyNetId | read-only | obsolete | Used internally to recognize this entry. |
| 1.3.6.1.4.1.2272.1.8.11.4.1.4 | ColumnrcIpPolicyNetNetListIdListSize | read-only | obsolete | Used to indicate the number of id(s) in the rcIpPolicyNetListIdList variable. |
| 1.3.6.1.4.1.2272.1.8.11.4.1.5 | ColumnrcIpPolicyNetNetListIdList | read-only | obsolete | Used to indicate zero or more rcIpPolicyNetListEntry(s) that are referring to this entry. Each list-id identifier is stored as two bytes in this array starting… |
| 1.3.6.1.4.1.2272.1.8.11.4.1.6 | ColumnrcIpPolicyNetRowStatus | read-write | obsolete | Row status of this entry. |
| 1.3.6.1.4.1.2272.1.8.11.5 | ScalarrcIpPolicyAddrListTableSize | read-only | obsolete | Used to indicate the number of entries in the rcIpPolicyAddrListTable. |
| 1.3.6.1.4.1.2272.1.8.11.6 | TablercIpPolicyAddrListTable | not-accessible | obsolete | A table used to group rcIpPolicyAddrEntry(s) into a list. |
| 1.3.6.1.4.1.2272.1.8.11.6.1 | RowrcIpPolicyAddrListEntry | not-accessible | obsolete | Route entry attributes. |
| 1.3.6.1.4.1.2272.1.8.11.6.1.1 | ColumnrcIpPolicyAddrListId | read-only | obsolete | A value that uniquely identifies this list of rcIpPolicyAddrListEntry. |
| 1.3.6.1.4.1.2272.1.8.11.6.1.3 | ColumnrcIpPolicyAddrListName | read-write | obsolete | An administratively-assigned name for this list. |
| 1.3.6.1.4.1.2272.1.8.11.6.1.4 | ColumnrcIpPolicyAddrListIdListSize | read-only | obsolete | Used to indicate the number of rcIpPolicyAddrNetEntry id(s) in the rcIpPolicyAddrListIdList variable. |
| 1.3.6.1.4.1.2272.1.8.11.6.1.5 | ColumnrcIpPolicyAddrListIdList | read-write | obsolete | Used to indicate zero or more AddrListId that are associated to this list. Each AddrList identifier is stored as two bytes in this array starting from offset z… |
| 1.3.6.1.4.1.2272.1.8.11.6.1.6 | ColumnrcIpPolicyAddrListPolicyIdListSize | read-only | obsolete | Used to indicate the number of policy id(s) in the Policy Id list. That are referring to this list. |
| 1.3.6.1.4.1.2272.1.8.11.6.1.7 | ColumnrcIpPolicyAddrListPolicyIdList | read-only | obsolete | Used to indicate zero or more policies that are referring to this entry. Each policy identifier is stored as two bytes in this array starting from offset zero.… |
| 1.3.6.1.4.1.2272.1.8.11.6.1.8 | ColumnrcIpPolicyAddrListRowStatus | read-write | obsolete | Row status of this entry. |
| 1.3.6.1.4.1.2272.1.8.11.7 | ScalarrcIpPolicyRipAnnounceTableSize | read-only | obsolete | Used to indicate the number of entries in the rcIpPolicyRipAnnounceTable. |
| 1.3.6.1.4.1.2272.1.8.11.8 | TablercIpPolicyRipAnnounceTable | not-accessible | obsolete | A table used to store set of announce policies configured for RIP routing protocol. The Number of entries is given by rcIpPolicyNumRipPolicies. |
| 1.3.6.1.4.1.2272.1.8.11.8.1 | RowrcIpPolicyRipAnnounceEntry | not-accessible | obsolete | Entry containing configuration information for a particular announce policy. |
| 1.3.6.1.4.1.2272.1.8.11.8.1.1 | ColumnrcIpPolicyRipAnnounceId | read-only | obsolete | A value that uniquely identifies the policy associated with this entry. |
| 1.3.6.1.4.1.2272.1.8.11.8.1.2 | ColumnrcIpPolicyRipAnnounceName | read-write | obsolete | An administratively-assigned name for this policy. |
| 1.3.6.1.4.1.2272.1.8.11.8.1.3 | ColumnrcIpPolicyRipAnnounceEnable | read-write | obsolete | It indicates whether this policy is enabled or not. The policy should be applied only if it is set to 'true'. |
| 1.3.6.1.4.1.2272.1.8.11.8.1.4 | ColumnrcIpPolicyRipAnnounceExactNetListId | read-write | obsolete | Used to indicate the number of 'exact' type entries that are configured for this policy. An entry with type 'exactNet' or 'rangeNet' represents the network lis… |
| 1.3.6.1.4.1.2272.1.8.11.8.1.5 | ColumnrcIpPolicyRipAnnounceRangeNetListId | read-write | obsolete | Used to indicate zero or more 'range' network entries that are associated with this policy. An entry with a 'range' type means to match any network number that… |
| 1.3.6.1.4.1.2272.1.8.11.8.1.6 | ColumnrcIpPolicyRipAnnounceRipGatewayListId | read-write | obsolete | Used to identify the RIP-gatewayList in the list that are associated with this policy. This field has meaning only for RIP sourced routes and if RIP is include… |
| 1.3.6.1.4.1.2272.1.8.11.8.1.7 | ColumnrcIpPolicyRipAnnounceRipInterfaceListId | read-write | obsolete | Used to indicate the number of entries in the ripInterfaceIdList that are configured for this policy. This field has meaning only for RIP sourced routes and if… |
| 1.3.6.1.4.1.2272.1.8.11.8.1.8 | ColumnrcIpPolicyRipAnnounceOspfRouterListId | read-write | obsolete | Used to indicate the number of entries in the OspfRouteIds that are configured for this policy. This field has meaning only for OSPF sourced routes and if OSPF… |
| 1.3.6.1.4.1.2272.1.8.11.8.1.9 | ColumnrcIpPolicyRipAnnounceAnnounceInterfaceListId | read-write | obsolete | Used to indicate the number of entries in the AnnounceInterfaceids that are configured for this policy. The list contains one or more outbound interface addres… |
| 1.3.6.1.4.1.2272.1.8.11.8.1.10 | ColumnrcIpPolicyRipAnnouncePrecedence | read-write | obsolete | Is used while comparing this policy rule with other policy that a given route may match. A rule with a higher precedence value will be chosen over one with a s… |
| 1.3.6.1.4.1.2272.1.8.11.8.1.11 | ColumnrcIpPolicyRipAnnounceRouteSource | read-write | obsolete | Is represented as bitset to indicate route sources. It can contain one or more route sources. If the route source is in this bit map, then a route from that so… |
| 1.3.6.1.4.1.2272.1.8.11.8.1.12 | ColumnrcIpPolicyRipAnnounceAdvertiseNetListId | read-write | obsolete | Used to indicate the number of entries in the AdvertiseNetList that are configured for this policy. This has meaning only if the Action is set to 'announce'. I… |
| 1.3.6.1.4.1.2272.1.8.11.8.1.13 | ColumnrcIpPolicyRipAnnounceAction | read-write | obsolete | It indicates whether the route should be announced or not. |
| 1.3.6.1.4.1.2272.1.8.11.8.1.14 | ColumnrcIpPolicyRipAnnounceOspfRouteType | read-write | obsolete | Ospf Route type. It applies to OSPF sourced routes only. 'type1' means to apply this policy to only type1 OSPF external routes. 'type2' means to apply this pol… |
| 1.3.6.1.4.1.2272.1.8.11.8.1.15 | ColumnrcIpPolicyRipAnnounceRipMetric | read-write | obsolete | RIP metric. The value is meaningful only if the action is set to 'announce'. This is optional export metric to use when advertising a route that matches this p… |
| 1.3.6.1.4.1.2272.1.8.11.8.1.16 | ColumnrcIpPolicyRipAnnounceRowStatus | read-write | obsolete | Row status of this entry. |
| 1.3.6.1.4.1.2272.1.8.11.9 | ScalarrcIpPolicyOspfAnnounceTableSize | read-only | obsolete | Used to indicate the number of entries in the rcIpPolicyOspfAnnounceTable. |
| 1.3.6.1.4.1.2272.1.8.11.10 | TablercIpPolicyOspfAnnounceTable | not-accessible | obsolete | A table used to store set of announce policies configured for OSPF routing protocol. The Number of entries is given by rcIpPolicyNumOspfPolicies. |
| 1.3.6.1.4.1.2272.1.8.11.10.1 | RowrcIpPolicyOspfAnnounceEntry | not-accessible | obsolete | Entry containing configuration information for a particular announce policy. |
| 1.3.6.1.4.1.2272.1.8.11.10.1.1 | ColumnrcIpPolicyOspfAnnounceId | read-only | obsolete | A value that uniquely identifies the policy associated with this entry. |
| 1.3.6.1.4.1.2272.1.8.11.10.1.2 | ColumnrcIpPolicyOspfAnnounceName | read-write | obsolete | An administratively-assigned name for this policy. |
| 1.3.6.1.4.1.2272.1.8.11.10.1.3 | ColumnrcIpPolicyOspfAnnounceEnable | read-write | obsolete | It indicates whether this policy is enabled or not. The policy should be applied only if it is set to 'true'. |
| 1.3.6.1.4.1.2272.1.8.11.10.1.4 | ColumnrcIpPolicyOspfAnnounceExactNetListId | read-write | obsolete | Used to indicate the number of 'exact' type entries that are configured for this policy. An entry with type 'exactNet' or 'rangeNet' represents the network lis… |
| 1.3.6.1.4.1.2272.1.8.11.10.1.5 | ColumnrcIpPolicyOspfAnnounceRangeNetListId | read-write | obsolete | Used to indicate zero or more 'range' network entries that are associated with this policy. An entry with a 'range' type means to match any network number that… |
| 1.3.6.1.4.1.2272.1.8.11.10.1.6 | ColumnrcIpPolicyOspfAnnounceRipGatewayListId | read-write | obsolete | Used to identify the RIP-gatewayList in the list that are associated with this policy. This field has meaning only for RIP sourced routes and if RIP is include… |
| 1.3.6.1.4.1.2272.1.8.11.10.1.7 | ColumnrcIpPolicyOspfAnnounceRipInterfaceListId | read-write | obsolete | Used to indicate the number of entries in the ripInterfaceIdList that are configured for this policy. This field has meaning only for RIP sourced routes and if… |
| 1.3.6.1.4.1.2272.1.8.11.10.1.8 | ColumnrcIpPolicyOspfAnnouncePrecedence | read-write | obsolete | Is used while comparing this policy rule with other policy that a given route may match. A rule with a higher precedence value will be chosen over one with a s… |
| 1.3.6.1.4.1.2272.1.8.11.10.1.9 | ColumnrcIpPolicyOspfAnnounceRouteSource | read-write | obsolete | Is represented as bit map to indicate route sources. It can contain one or more route sources. If the route source is in this bit map, then a route from that s… |
| 1.3.6.1.4.1.2272.1.8.11.10.1.10 | ColumnrcIpPolicyOspfAnnounceAdvertiseNetListId | read-write | obsolete | Used to indicate the number of entries in the AdvertiseNetList that are configured for this policy. This has meaning only if the Action is set to 'announce'. I… |
| 1.3.6.1.4.1.2272.1.8.11.10.1.11 | ColumnrcIpPolicyOspfAnnounceAction | read-write | obsolete | It indicates whether the route should be announced or not. |
| 1.3.6.1.4.1.2272.1.8.11.10.1.12 | ColumnrcIpPolicyOspfAnnounceExtMetricType | read-write | obsolete | Ospf External metric type. It is used to indicate what type of the external metric it is. 'type1' means to the cost is 'internal ospf cost + ExtMetric'. 'type2… |
| 1.3.6.1.4.1.2272.1.8.11.10.1.13 | ColumnrcIpPolicyOspfAnnounceExtMetric | read-write | obsolete | OSPF External metric. The value is meaningful only if the action is set to 'announce'. This is optional export metric to use when advertising a route that matc… |
| 1.3.6.1.4.1.2272.1.8.11.10.1.14 | ColumnrcIpPolicyOspfAnnounceRowStatus | read-write | obsolete | Row status of this entry. |
| 1.3.6.1.4.1.2272.1.8.11.11 | ScalarrcIpPolicyRipAcceptTableSize | read-only | obsolete | Used to indicate the number of entries in the rcIpPolicyRipAcceptTable. |
| 1.3.6.1.4.1.2272.1.8.11.12 | TablercIpPolicyRipAcceptTable | not-accessible | obsolete | A table used to store set of accept policies configured for RIP routing protocol. The Number of entries is given by rcIpPolicyNumRipPolicies. |
| 1.3.6.1.4.1.2272.1.8.11.12.1 | RowrcIpPolicyRipAcceptEntry | not-accessible | obsolete | Entry containing configuration information for a particular accept policy. |
| 1.3.6.1.4.1.2272.1.8.11.12.1.1 | ColumnrcIpPolicyRipAcceptId | read-only | obsolete | A value that uniquely identifies the policy associated with this entry. |
| 1.3.6.1.4.1.2272.1.8.11.12.1.2 | ColumnrcIpPolicyRipAcceptName | read-write | obsolete | An administratively-assigned name for this policy. |
| 1.3.6.1.4.1.2272.1.8.11.12.1.3 | ColumnrcIpPolicyRipAcceptEnable | read-write | obsolete | It indicates whether this policy is enabled or not. The policy should be applied only if it is set to 'true'. |
| 1.3.6.1.4.1.2272.1.8.11.12.1.4 | ColumnrcIpPolicyRipAcceptExactNetListId | read-write | obsolete | Used to indicate the number of 'exact' type entries that are configured for this policy. An entry with type 'exactNet' or 'rangeNet' represents the network lis… |
| 1.3.6.1.4.1.2272.1.8.11.12.1.5 | ColumnrcIpPolicyRipAcceptRangeNetListId | read-write | obsolete | Used to indicate zero or more 'range' network entries that are associated with this policy. An entry with a 'range' type means to match any network number that… |
| 1.3.6.1.4.1.2272.1.8.11.12.1.6 | ColumnrcIpPolicyRipAcceptRipGatewayListId | read-write | obsolete | Used to identify the RIP-gatewayList in the PolicyListTable that iares associated with this policy. The list contains the addresses of one or more routers that… |
| 1.3.6.1.4.1.2272.1.8.11.12.1.7 | ColumnrcIpPolicyRipAcceptRipInterfaceListId | read-write | obsolete | Used to indicate ListId defined for RipInterfaceList in the rcIpPolicyListTable that is assiciated with this policy. The list contains the addresses of one or … |
| 1.3.6.1.4.1.2272.1.8.11.12.1.8 | ColumnrcIpPolicyRipAcceptPrecedence | read-write | obsolete | Is used while comparing this policy rule with other policy that a given route may match. A rule with a higher precedence value will be chosen over one with a s… |
| 1.3.6.1.4.1.2272.1.8.11.12.1.9 | ColumnrcIpPolicyRipAcceptAction | read-write | obsolete | It indicates whether the route should be acceptd or not. |
| 1.3.6.1.4.1.2272.1.8.11.12.1.10 | ColumnrcIpPolicyRipAcceptInjectNetListId | read-write | obsolete | Used to indicate the ListId of the InjectNetList in the rcIpPolicyListTable entry that is assiciated with for this policy. If teh action is 'accept' and if it … |
| 1.3.6.1.4.1.2272.1.8.11.12.1.11 | ColumnrcIpPolicyRipAcceptApplyMask | read-write | obsolete | If the 'action' is set to 'accept' and the actual received network will be considered, this is an optional IP address mask that will be applied to the network … |
| 1.3.6.1.4.1.2272.1.8.11.12.1.12 | ColumnrcIpPolicyRipAcceptRowStatus | read-write | obsolete | Row status of this entry. |
| 1.3.6.1.4.1.2272.1.8.11.13 | ScalarrcIpPolicyOspfAcceptTableSize | read-only | obsolete | Used to indicate the number of entries in the rcIpPolicyOspfAcceptTable. |
| 1.3.6.1.4.1.2272.1.8.11.14 | TablercIpPolicyOspfAcceptTable | not-accessible | obsolete | A table used to store set of accept policies configured for RIP routing protocol. The Number of entries is given by rcIpPolicyNumRipPolicies. |
| 1.3.6.1.4.1.2272.1.8.11.14.1 | RowrcIpPolicyOspfAcceptEntry | not-accessible | obsolete | Entry containing configuration information for a particular accept policy. |
| 1.3.6.1.4.1.2272.1.8.11.14.1.1 | ColumnrcIpPolicyOspfAcceptId | read-only | obsolete | A value that uniquely identifies the policy associated with this entry. |
| 1.3.6.1.4.1.2272.1.8.11.14.1.2 | ColumnrcIpPolicyOspfAcceptName | read-write | obsolete | An administratively-assigned name for this policy. |
| 1.3.6.1.4.1.2272.1.8.11.14.1.3 | ColumnrcIpPolicyOspfAcceptEnable | read-write | obsolete | It indicates whether this policy is enabled or not. The policy should be applied only if it is set to 'true'. |
| 1.3.6.1.4.1.2272.1.8.11.14.1.4 | ColumnrcIpPolicyOspfAcceptExactNetListId | read-write | obsolete | Used to indicate the number of 'exact' type entries that are configured for this policy. An entry with type 'exactNet' or 'rangeNet' represents the network lis… |
| 1.3.6.1.4.1.2272.1.8.11.14.1.5 | ColumnrcIpPolicyOspfAcceptRangeNetListId | read-write | obsolete | Used to indicate zero or more 'range' network entries that are associated with this policy. An entry with a 'range' type means to match any network number that… |
| 1.3.6.1.4.1.2272.1.8.11.14.1.6 | ColumnrcIpPolicyOspfAcceptPrecedence | read-write | obsolete | Is used while comparing this policy rule with other policy that a given route may match. A rule with a higher precedence value will be chosen over one with a s… |
| 1.3.6.1.4.1.2272.1.8.11.14.1.7 | ColumnrcIpPolicyOspfAcceptAction | read-write | obsolete | It indicates whether the route should be acceptd or not. |
| 1.3.6.1.4.1.2272.1.8.11.14.1.8 | ColumnrcIpPolicyOspfAcceptInjectNetListId | read-write | obsolete | Used to indicate the ListId of the InjectNetList in the rcIpPolicyListTable entry that is assiciated with for this policy. If teh action is 'accept' and if it … |
| 1.3.6.1.4.1.2272.1.8.11.14.1.9 | ColumnrcIpPolicyOspfAcceptExtType | read-write | obsolete | Used to indicate the ospf external type. This parameter describes which types of OSPF ASE routes match this policy. 'any' means 'match either ASE type 1 or 2'.… |
| 1.3.6.1.4.1.2272.1.8.11.14.1.10 | ColumnrcIpPolicyOspfAcceptRowStatus | read-write | obsolete | Row status of this entry. |
| 1.3.6.1.4.1.2272.1.8.11.15 | ScalarrcIpPolicyNetListTableSize | read-only | obsolete | Used to indicate the number of entries in the rcIpPolicyNetListTable. |
| 1.3.6.1.4.1.2272.1.8.11.16 | TablercIpPolicyNetListTable | not-accessible | obsolete | A table used to group rcIpPolicyAddrEntry(s) into a list. |
| 1.3.6.1.4.1.2272.1.8.11.16.1 | RowrcIpPolicyNetListEntry | not-accessible | obsolete | Route entry attributes. |
| 1.3.6.1.4.1.2272.1.8.11.16.1.1 | ColumnrcIpPolicyNetListId | read-only | obsolete | A value that uniquely identifies this list of rcIpPolicyNetListEntry. |
| 1.3.6.1.4.1.2272.1.8.11.16.1.3 | ColumnrcIpPolicyNetListName | read-write | obsolete | An administratively-assigned name for this list. |
| 1.3.6.1.4.1.2272.1.8.11.16.1.4 | ColumnrcIpPolicyNetListIdListSize | read-only | obsolete | Used to indicate the number of rcIpPolicyNetEntry id(s) in the rcIpPolicyNetListIdList variable. |
| 1.3.6.1.4.1.2272.1.8.11.16.1.5 | ColumnrcIpPolicyNetListIdList | read-write | obsolete | Used to indicate zero or more NetListId that are associated to this list. Each NetList identifier is stored as two bytes in this array starting from offset zer… |
| 1.3.6.1.4.1.2272.1.8.11.16.1.6 | ColumnrcIpPolicyNetListPolicyIdListSize | read-only | obsolete | Used to indicate the number of policy id(s) in the Policy Id list. That are referring to this list. |
| 1.3.6.1.4.1.2272.1.8.11.16.1.7 | ColumnrcIpPolicyNetListPolicyIdList | read-only | obsolete | Used to indicate zero or more policies that are referring to this entry. Each policy identifier is stored as two bytes in this array starting from offset zero.… |
| 1.3.6.1.4.1.2272.1.8.11.16.1.8 | ColumnrcIpPolicyNetListRowStatus | read-write | obsolete | Row status of this entry. |
| 1.3.6.1.4.1.2272.1.8.12 | NodercIpDvmrp | |||
| 1.3.6.1.4.1.2272.1.8.12.1 | NodercIpDvmrpGlobal | |||
| 1.3.6.1.4.1.2272.1.8.12.1.1 | ScalarrcIpDvmrpGlobalEnable | read-write | current | The enabled status of IP Multicast Dvmrp routing on this router. |
| 1.3.6.1.4.1.2272.1.8.12.1.2 | ScalarrcIpDvmrpGlobalUpdateInterval | read-write | current | Route upd interval |
| 1.3.6.1.4.1.2272.1.8.12.1.3 | ScalarrcIpDvmrpGlobalTriggeredUpdateInterval | read-write | current | Trigger upd interval |
| 1.3.6.1.4.1.2272.1.8.12.1.4 | ScalarrcIpDvmrpGlobalLeafTimeOut | read-write | current | Hold down timer for leaf |
| 1.3.6.1.4.1.2272.1.8.12.1.5 | ScalarrcIpDvmrpGlobalNbrTimeOut | read-write | current | Time to age out nbr |
| 1.3.6.1.4.1.2272.1.8.12.1.6 | ScalarrcIpDvmrpGlobalNbrProbeInterval | read-write | current | How often to send probe |
| 1.3.6.1.4.1.2272.1.8.12.1.7 | ScalarrcIpDvmrpGlobalRouteExpireTimeOut | read-write | current | This parameter defines the route expiration timeout in seconds. |
| 1.3.6.1.4.1.2272.1.8.12.1.8 | ScalarrcIpDvmrpGlobalFwdCacheTimeOut | read-write | current | This is the Forward Cache Value in second. This value is going to be used in aging prune entries in seconds. |
| 1.3.6.1.4.1.2272.1.8.12.1.9 | ScalarrcIpDvmrpGlobalRouteDiscardTimeOut | read-write | current | This parameter defines time to garbage collect route in seconds. |
| 1.3.6.1.4.1.2272.1.8.12.1.10 | ScalarrcIpDvmrpGlobalRouteSwitchTimeOut | read-write | current | This parameter defines the route discard timeout in seconds. |
| 1.3.6.1.4.1.2272.1.8.12.1.12 | ScalarrcIpDvmrpGlobalGenerateTrap | read-write | current | Enabling the dvmrp to generate trap. |
| 1.3.6.1.4.1.2272.1.8.12.1.13 | ScalarrcIpDvmrpGlobalGenerateLog | read-write | current | Enabling the dvmrp to generate log. |
| 1.3.6.1.4.1.2272.1.8.12.2 | TablercIpDvmrpTable | not-accessible | current | Dvmrp Interface extension table. This table augments the standard dvmrpInterfaceTable defined in <draft-thaler-dvmrp-mib-09.txt>. |
| 1.3.6.1.4.1.2272.1.8.12.2.1 | RowrcIpDvmrpTableEntry | not-accessible | current | Entry containing Proprietary DVMRP interface information. An entry is automatically created in this table when an ip address is configured on an interface. |
| 1.3.6.1.4.1.2272.1.8.12.2.1.1 | ColumnrcIpDvmrpTableIfIndex | read-only | current | The index value which uniquely identifies the interface to which this entry is applicable. The interface identified by a particular value of this index is the … |
| 1.3.6.1.4.1.2272.1.8.12.2.1.2 | ColumnrcIpDvmrpTableEnable | read-write | current | The administrative status of DVMRP in the router. The value 'enabled' denotes that the DVMRP is enableed on the interface; 'disabled' disables it on the interf… |
| 1.3.6.1.4.1.2272.1.8.12.2.1.3 | ColumnrcIpDvmrpTableMetric | read-write | current | Dvmrp cost on this interface. |
| 1.3.6.1.4.1.2272.1.8.12.2.1.4 | ColumnrcIpDvmrpTableAdvSelf | read-write | current | Used to indicate whether the switch can advertise this local network |
| 1.3.6.1.4.1.2272.1.8.12.2.1.5 | ColumnrcIpDvmrpTableLocalAddr | read-only | current | The IP address of this interface. |
| 1.3.6.1.4.1.2272.1.8.12.2.1.6 | ColumnrcIpDvmrpTableInPolicyName | read-write | current | Dvmrp Accept Policy name that is configured on this interface. |
| 1.3.6.1.4.1.2272.1.8.12.2.1.7 | ColumnrcIpDvmrpTableOutPolicyName | read-write | current | Dvmrp Announce Policy name that is configured on this interface. |
| 1.3.6.1.4.1.2272.1.8.12.2.1.8 | ColumnrcIpDvmrpTableDefRtLis | read-write | current | Used to indicate whether the switch can learn DVMRP default route over this interface |
| 1.3.6.1.4.1.2272.1.8.12.2.1.9 | ColumnrcIpDvmrpTableDefRtSup | read-write | current | Used to indicate whether the switch should supply DVMRP default route over this interface |
| 1.3.6.1.4.1.2272.1.8.12.2.1.10 | ColumnrcIpDvmrpTableDefRtMet | read-write | current | Used to specify the cost of the DVMRP default route that this interface generates and supplies when it is configured to supply default route |
| 1.3.6.1.4.1.2272.1.8.12.2.1.11 | ColumnrcIpDvmrpTableInterfaceType | read-write | current | Dvmrp Interface type |
| 1.3.6.1.4.1.2272.1.8.13 | NodercIpUdp | |||
| 1.3.6.1.4.1.2272.1.8.13.1 | ScalarrcIpUdpProtocolTableSize | read-only | current | Used to indicate the number of entries in the rcIpUdpProtocolTable. |
| 1.3.6.1.4.1.2272.1.8.13.2 | TablercIpUdpProtocolTable | not-accessible | current | list of UDP protocols. Used to determine whether to forward the UDP broadcast packet or not. |
| 1.3.6.1.4.1.2272.1.8.13.2.1 | RowrcIpUdpProtocolEntry | not-accessible | current | Used to include a particular UDP port in the table. An entry in this table indicates that the box might do forwarding of UDP broadcast packets if there is a ma… |
| 1.3.6.1.4.1.2272.1.8.13.2.1.1 | ColumnrcIpUdpProtocolPortNumber | read-only | current | well-known UDP Port number. Pre-assigned port number for this protocol. Port used by the server process as its contact port. It cannot be BOOTP/DHCP port#s 67,… |
| 1.3.6.1.4.1.2272.1.8.13.2.1.2 | ColumnrcIpUdpProtocolName | read-write | current | Used to indicate the name of the protocol that is running on top of UDP protocol. cannot change the name once created. This should be set while creating the en… |
| 1.3.6.1.4.1.2272.1.8.13.2.1.3 | ColumnrcIpUdpProtocolRowStatus | read-write | current | Rowstatus of this entry. |
| 1.3.6.1.4.1.2272.1.8.13.3 | ScalarrcIpUdpPortFwdTableSize | read-only | current | Used to indicate the number of entries in the rcIpUdpPortFwdTable. |
| 1.3.6.1.4.1.2272.1.8.13.4 | TablercIpUdpPortFwdTable | not-accessible | current | Udp forward entry table. |
| 1.3.6.1.4.1.2272.1.8.13.4.1 | RowrcIpUdpPortFwdEntry | not-accessible | current | An entry is configured to specify forwarding policy parameters. |
| 1.3.6.1.4.1.2272.1.8.13.4.1.1 | ColumnrcIpUdpPortFwdDestPort | read-only | current | The well-known port number defined for UDP/TCP depending on the value of IpProtoType field in this entry. This port number has to be defined in the rcIpUdpProt… |
| 1.3.6.1.4.1.2272.1.8.13.4.1.2 | ColumnrcIpUdpPortFwdDestAddr | read-only | current | Destination IP address. The IP addres to which the UDP/TCP broadcast should be forwarded. This IP address can be any IP server address or subnet broadcast addr… |
| 1.3.6.1.4.1.2272.1.8.13.4.1.3 | ColumnrcIpUdpPortFwdId | read-only | current | Identifier of this entry. Used internally to identify this entry. |
| 1.3.6.1.4.1.2272.1.8.13.4.1.4 | ColumnrcIpUdpPortFwdFwdListIdListSize | read-only | current | Used to indicate the number of id(s) in the rcIpUdpPortFwdListId variable. |
| 1.3.6.1.4.1.2272.1.8.13.4.1.5 | ColumnrcIpUdpPortFwdFwdListIdList | read-only | current | Used to indicate zero or more rcIpUdpPortFwdListEntry(s) that are referring to this entry. Each list-id identifier is stored as two bytes in this array startin… |
| 1.3.6.1.4.1.2272.1.8.13.4.1.6 | ColumnrcIpUdpPortFwdNumFwdPackets | read-only | current | The total number of UDP/TCP broadcast packets forwarded using this policy. |
| 1.3.6.1.4.1.2272.1.8.13.4.1.7 | ColumnrcIpUdpPortFwdNumDropPacketsTtlExpired | read-only | current | The total number of UDP/TCP broadcast packets dropped because the TTL has expired. |
| 1.3.6.1.4.1.2272.1.8.13.4.1.8 | ColumnrcIpUdpPortFwdNumDropPacketsDestUnreach | read-only | current | The total number of UDP/TCP broadcast packets dropped because the rcIpUdpPortFwdDestAddr specified in this policy was unreachable. |
| 1.3.6.1.4.1.2272.1.8.13.4.1.9 | ColumnrcIpUdpPortFwdRowStatus | read-write | current | Row status of this entry. |
| 1.3.6.1.4.1.2272.1.8.13.5 | ScalarrcIpUdpPortFwdListTableSize | read-only | current | Used to indicate the number of entries in the rcIpUdpPortFwdListTable. |
| 1.3.6.1.4.1.2272.1.8.13.6 | TablercIpUdpPortFwdListTable | not-accessible | current | A table used to group rcIpUdpPortFwdEntry(s) into a list. |
| 1.3.6.1.4.1.2272.1.8.13.6.1 | RowrcIpUdpPortFwdListEntry | not-accessible | current | Route entry attributes. |
| 1.3.6.1.4.1.2272.1.8.13.6.1.1 | ColumnrcIpUdpPortFwdListId | read-only | current | A value that uniquely identifies this list of rcIpUdpPortFwdListEntry. |
| 1.3.6.1.4.1.2272.1.8.13.6.1.3 | ColumnrcIpUdpPortFwdListName | read-write | current | An administratively-assigned name for this list. |
| 1.3.6.1.4.1.2272.1.8.13.6.1.4 | ColumnrcIpUdpPortFwdListFwdIdListSize | read-only | current | Used to indicate the number of rcIpUdpPortFwdNetEntry id(s) in the rcIpUdpPortFwdListIdList variable. |
| 1.3.6.1.4.1.2272.1.8.13.6.1.5 | ColumnrcIpUdpPortFwdListFwdIdList | read-write | current | Used to indicate zero or more UdpPortFwd entries that are associated to this list. Each entry identifier is stored as two bytes in this array starting from off… |
| 1.3.6.1.4.1.2272.1.8.13.6.1.6 | ColumnrcIpUdpPortFwdListRowStatus | read-write | current | Row status of this entry. |
| 1.3.6.1.4.1.2272.1.8.13.7 | ScalarrcIpUdpConfBroadcastIntfTableSize | read-only | current | Used to indicate the number of entries in the rcIpUdpBroadcastIntfTable. |
| 1.3.6.1.4.1.2272.1.8.13.8 | TablercIpUdpConfBroadcastIntfTable | not-accessible | current | IP broadcast forward configuration table |
| 1.3.6.1.4.1.2272.1.8.13.8.1 | RowrcIpUdpConfBroadcastIntfEntry | not-accessible | current | Used to configure UDP broadcast forward on a particular interface. |
| 1.3.6.1.4.1.2272.1.8.13.8.1.1 | ColumnrcIpUdpConfBroadcastIntfLocalIfAddr | read-only | current | The ip address of the local interface that is partipating in the forwarding UDP broadcast packets. |
| 1.3.6.1.4.1.2272.1.8.13.8.1.2 | ColumnrcIpUdpConfBroadcastIntfUdpPortFwdListId | read-write | current | Used to indicate the number UDP ports that this interface is configured to forward. A value of '0' indicates that this interface will not forward any UDP broad… |
| 1.3.6.1.4.1.2272.1.8.13.8.1.3 | ColumnrcIpUdpConfBroadcastIntfMaxTtl | read-write | current | Used to indicate the maximum number of hops an IP broadcast packet can take from the source device to the destination device. |
| 1.3.6.1.4.1.2272.1.8.13.8.1.4 | ColumnrcIpUdpConfBroadcastIntfNumRxPkts | read-only | current | The total number of UDP/TCP broadcast packets received by this local interface. |
| 1.3.6.1.4.1.2272.1.8.13.8.1.5 | ColumnrcIpUdpConfBroadcastIntfNumFwdPkts | read-only | current | The total number of UDP/TCP broadcast packets forwarded. |
| 1.3.6.1.4.1.2272.1.8.13.8.1.6 | ColumnrcIpUdpConfBroadcastIntfNumDropPktsMaxTtlExpired | read-only | current | The total number of UDP/TCP broadcast packets dropped because the TTL has expired. |
| 1.3.6.1.4.1.2272.1.8.13.8.1.7 | ColumnrcIpUdpConfBroadcastIntfNumDropPktsDestUnreach | read-only | current | The total number of UDP broadcast packets dropped because the destination was unreachable. |
| 1.3.6.1.4.1.2272.1.8.13.8.1.8 | ColumnrcIpUdpConfBroadcastIntfNumDropPktsUnknownPort | read-only | current | The total number of UDP/TCP broadcast packets dropped because the destination port/protocol specified has no matching forwarding policy. |
| 1.3.6.1.4.1.2272.1.8.13.8.1.9 | ColumnrcIpUdpConfBroadcastIntfRowStatus | read-write | current | Entry row status. |
| 1.3.6.1.4.1.2272.1.8.13.8.1.10 | ColumnrcIpUdpConfBroadcastIntfBroadCastMask | read-write | current | The subnet mask of the local interface that is used for broadcasting the UDP broadcast packets. |
| 1.3.6.1.4.1.2272.1.8.14 | NodercIpTosRule | |||
| 1.3.6.1.4.1.2272.1.8.14.1 | ScalarrcIpTosRuleAndMask | read-write | obsolete | And Mask. The Ip ToS byte in the Ip header is logically ANDed with this value, and then logically ORed with the one of the OrRules below. |
| 1.3.6.1.4.1.2272.1.8.14.2 | ScalarrcIpTosRuleOrRule1 | read-write | obsolete | Quid/Gid Or rule #1. The Ip ToS byte in the Ip header is logically ORed with this value. |
| 1.3.6.1.4.1.2272.1.8.14.3 | ScalarrcIpTosRuleOrRule2 | read-write | obsolete | Quid/Gid Or rule #2. The Ip ToS byte in the Ip header is logically ORed with this value. |
| 1.3.6.1.4.1.2272.1.8.14.4 | ScalarrcIpTosRuleOrRule3 | read-write | obsolete | Quid/Gid Or rule #3. The Ip ToS byte in the Ip header is logically ORed with this value. |
| 1.3.6.1.4.1.2272.1.8.14.5 | ScalarrcIpTosRuleTosPriorityEnable | read-write | obsolete | Enable Tos priority. |
| 1.3.6.1.4.1.2272.1.8.14.6 | ScalarrcIpTosRuleTosThreshold | read-only | obsolete | tos threshold |
| 1.3.6.1.4.1.2272.1.8.15 | NodercIpStaticRoute | |||
| 1.3.6.1.4.1.2272.1.8.15.1 | ScalarrcIpStaticRouteTableSize | read-only | current | size of Ip Static Route Table. |
| 1.3.6.1.4.1.2272.1.8.15.2 | TablercIpStaticRouteTable | not-accessible | current | This table is used to add static IP routes to the device. Routes added into this table will automatically show-up in the 'rcIpRouteTable' when the device is ac… |
| 1.3.6.1.4.1.2272.1.8.15.2.1 | RowrcIpStaticRouteEntry | not-accessible | current | A static route to a particular destination. |
| 1.3.6.1.4.1.2272.1.8.15.2.1.1 | ColumnrcIpStaticRouteDest | read-only | current | The destination IP address of this route. An entry with a value of 0.0.0.0 is considered a default route. Multiple routes to a single destination can appear in… |
| 1.3.6.1.4.1.2272.1.8.15.2.1.2 | ColumnrcIpStaticRouteMask | read-only | current | Indicate the mask to be logical-ANDed with the destination address before being compared to the value in the rcIpRouteDest field. For those systems that do not… |
| 1.3.6.1.4.1.2272.1.8.15.2.1.3 | ColumnrcIpStaticRouteNextHop | read-only | current | The IP address of the next hop of this route. (In the case of a route bound to an interface which is realized via a broadcast media, the value of this field is… |
| 1.3.6.1.4.1.2272.1.8.15.2.1.4 | ColumnrcIpStaticRouteMetric | read-write | current | The primary routing metric for this route. The semantics of this metric are determined by the routing-protocol specified in the route's rcIpRouteProto value. I… |
| 1.3.6.1.4.1.2272.1.8.15.2.1.5 | ColumnrcIpStaticRouteIfIndex | read-only | current | The index value which uniquely identifies the local interface through which the next hop of this route should be reached. The interface identified by a particu… |
| 1.3.6.1.4.1.2272.1.8.15.2.1.6 | ColumnrcIpStaticRoutePreference | read-write | current | Used to indicate the route preference of this entry. If there are more than one route that can be used to forward IP traffic, the route that has a highest pref… |
| 1.3.6.1.4.1.2272.1.8.15.2.1.7 | ColumnrcIpStaticRouteEnable | read-write | current | Used to enable/disable this entry. |
| 1.3.6.1.4.1.2272.1.8.15.2.1.8 | ColumnrcIpStaticRouteStatus | read-only | current | Used to indicate the current status of this entry. |
| 1.3.6.1.4.1.2272.1.8.15.2.1.9 | ColumnrcIpStaticRouteRowStatus | read-write | current | Used to create/delete entries |
| 1.3.6.1.4.1.2272.1.8.15.2.1.10 | ColumnrcIpStaticRouteLocalNextHop | read-write | current | Used to enable/disable this entry. True indicate that the static route becomes active only if switch has a local route to the network. False indicates that the… |
| 1.3.6.1.4.1.2272.1.8.15.3 | ScalarrcIpStaticRouteBfdTableSize | read-only | current | size of IP static route BFD table. |
| 1.3.6.1.4.1.2272.1.8.15.4 | TablercIpStaticRouteBfdTable | not-accessible | current | This table is used to hold next hop addresses on which BFD is enabled. |
| 1.3.6.1.4.1.2272.1.8.15.4.1 | RowrcIpStaticRouteBfdEntry | not-accessible | current | An IP address of the next hop of the BFD session. |
| 1.3.6.1.4.1.2272.1.8.15.4.1.1 | ColumnrcIpStaticRouteBfdNextHop | read-only | current | The IP address of the next hop of the BFD session. |
| 1.3.6.1.4.1.2272.1.8.15.4.1.2 | ColumnrcIpStaticRouteBfdRowStatus | read-create | current | Used to create/delete entries |
| 1.3.6.1.4.1.2272.1.8.16 | NodercIpPim | |||
| 1.3.6.1.4.1.2272.1.8.16.1 | NodercIpPimGlobal | |||
| 1.3.6.1.4.1.2272.1.8.16.1.1 | ScalarrcIpPimGlobalEnable | read-write | current | enable feature |
| 1.3.6.1.4.1.2272.1.8.16.1.2 | ScalarrcIpPimGlobalMode | read-write | current | |
| 1.3.6.1.4.1.2272.1.8.16.1.3 | ScalarrcIpPimGlobalMbr | read-write | current | enable/disable pim multicast border router feature |
| 1.3.6.1.4.1.2272.1.8.16.1.4 | ScalarrcIpPimGlobalRegisterSuppTimer | read-write | current | Each source's DR maintains, per (S,G), a Register- Suppression-timer in seconds. The Register- Suppression-timer is started by the Register-Stop message; upon … |
| 1.3.6.1.4.1.2272.1.8.16.1.5 | ScalarrcIpPimGlobalInterfaceTableSize | read-only | current | table size |
| 1.3.6.1.4.1.2272.1.8.16.1.6 | ScalarrcIpPimGlobalUniRouteChgTimeOut | read-write | current | This timer allows a better tuning on how fast the routing information is going to get updated from RTM (the frequency at which the RTM is polled for routing in… |
| 1.3.6.1.4.1.2272.1.8.16.1.7 | ScalarrcIpPimGlobalDiscardDataTimeOut | read-write | current | This timer is used to discard data until the Join is received from the RP. A ipmc discard record is created and deleted once the timer expires and/or when a Jo… |
| 1.3.6.1.4.1.2272.1.8.16.1.8 | ScalarrcIpPimGlobalCRPADVTimeOut | read-write | current | Routers configured as candidate RPs use this timer to periodically send C-RP-Adv messages. Upon expiry, a C-RP-Adv message is sent to the elected BSR. |
| 1.3.6.1.4.1.2272.1.8.16.1.9 | ScalarrcIpPimGlobalBootStrapPeriod | read-write | current | At the elected BSR, this is the interval between originating Bootstrap messages. |
| 1.3.6.1.4.1.2272.1.8.16.1.10 | ScalarrcIpPimGlobalStaticRP | read-write | current | Enable/Disable Static RP feature. |
| 1.3.6.1.4.1.2272.1.8.16.1.11 | ScalarrcIpPimGlobalActivityChkInterval | read-only | current | Activity check interval for polling PIM SG traffic activity information. |
| 1.3.6.1.4.1.2272.1.8.16.1.12 | ScalarrcIpPimGlobalFwdCacheTimeOut | read-write | current | PIM forward cache expiry value in seconds.This value is going to be used in aging PIM mroutes in seconds. |
| 1.3.6.1.4.1.2272.1.8.16.1.13 | ScalarrcIpPimGlobalFastJoinPrune | read-write | current | Pim Fast Join Prune. |
| 1.3.6.1.4.1.2272.1.8.16.1.14 | ScalarrcIpPimGlobalStaticRPSpecificRt | read-write | current | Enable/Disable Static RP specific route feature. |
| 1.3.6.1.4.1.2272.1.8.16.1.15 | ScalarrcIpPimGlobalOperEnable | read-only | current | Indicates whether PIM is operationally enabled. |
| 1.3.6.1.4.1.2272.1.8.16.1.16 | ScalarrcIpPimGlobalPruneDelayControl | read-write | current | Enable/Disable prune-delay-control feature |
| 1.3.6.1.4.1.2272.1.8.16.2 | TablercIpPimTable | not-accessible | current | IP Pim table |
| 1.3.6.1.4.1.2272.1.8.16.2.1 | RowrcIpPimEntry | not-accessible | current | An entry of Ip Pim Table. |
| 1.3.6.1.4.1.2272.1.8.16.2.1.1 | ColumnrcIpPimIfIndex | read-only | current | port |
| 1.3.6.1.4.1.2272.1.8.16.2.1.2 | ColumnrcIpPimEnable | read-write | current | enable interface |
| 1.3.6.1.4.1.2272.1.8.16.2.1.3 | ColumnrcIpPimMode | read-write | current | |
| 1.3.6.1.4.1.2272.1.8.16.2.1.4 | ColumnrcIpPimHelloInterval | read-write | current | frq. at which hello sent. |
| 1.3.6.1.4.1.2272.1.8.16.2.1.5 | ColumnrcIpPimJoinPruneInterval | read-write | current | |
| 1.3.6.1.4.1.2272.1.8.16.2.1.6 | ColumnrcIpPimCBSRPreference | read-write | current | |
| 1.3.6.1.4.1.2272.1.8.16.2.1.7 | ColumnrcIpPimIntfType | read-write | current | Pim interface type. |
| 1.3.6.1.4.1.2272.1.8.16.2.1.8 | ColumnrcIpPimPruneDelay | read-write | current | Pim Prune Delay. |
| 1.3.6.1.4.1.2272.1.8.16.3 | TablercIpPimInterfaceTable | not-accessible | current | IP Pim table |
| 1.3.6.1.4.1.2272.1.8.16.3.1 | RowrcIpPimInterfaceEntry | not-accessible | current | An entry of Ip Pim Interface Table. |
| 1.3.6.1.4.1.2272.1.8.16.3.1.1 | ColumnrcIpPimInterfaceIfIndex | read-only | current | port |
| 1.3.6.1.4.1.2272.1.8.16.3.1.2 | ColumnrcIpPimInterfaceOperState | read-only | current | The current operational state of this PIM interface. This object is deprecated in favor of ifOperStatus. |
| 1.3.6.1.4.1.2272.1.8.16.3.1.3 | ColumnrcIpPimInterfaceType | read-write | current | Pim interface type. |
| 1.3.6.1.4.1.2272.1.8.16.3.1.4 | ColumnrcIpPimInterfaceCBSREnable | read-write | current | Enable/disable Candidate BSR on pim local interface. |
| 1.3.6.1.4.1.2272.1.8.16.4 | TablercIpPimStaticRPTable | not-accessible | current | The table lists all the RPs configured statically for various IP multicast groups. |
| 1.3.6.1.4.1.2272.1.8.16.4.1 | RowrcIpPimStaticRPEntry | not-accessible | current | An entry (conceptual row) in the rcIpPimStaticRPTable. |
| 1.3.6.1.4.1.2272.1.8.16.4.1.1 | ColumnrcIpPimStaticRPGroupAddress | read-only | current | The IP multicast group address which, when combined with rcIpPimStaticRPGroupMask, identifies a group prefix for which rcIpPimStaticRPAddress is a static-RP. |
| 1.3.6.1.4.1.2272.1.8.16.4.1.2 | ColumnrcIpPimStaticRPGroupMask | read-only | current | The multicast group address mask which, when combined with rcIpPimStaticRPGroupAddress, identifies a group prefix for which rcIpPimStaticRPAddress is a static-… |
| 1.3.6.1.4.1.2272.1.8.16.4.1.3 | ColumnrcIpPimStaticRPAddress | read-only | current | The (unicast) address of the static-RP. |
| 1.3.6.1.4.1.2272.1.8.16.4.1.4 | ColumnrcIpPimStaticRPRowStatus | read-write | current | The status of this row, by which new entries may be created, or old entries deleted from this table. |
| 1.3.6.1.4.1.2272.1.8.16.4.1.5 | ColumnrcIpPimStaticRPStatus | read-only | current | The status of StaticRP. |
| 1.3.6.1.4.1.2272.1.8.16.5 | NodercIpPimCurrBsr | |||
| 1.3.6.1.4.1.2272.1.8.16.5.1 | ScalarrcIpPimCurrBsrAddress | read-only | current | Current BSR address |
| 1.3.6.1.4.1.2272.1.8.16.5.2 | ScalarrcIpPimCurrBsrFragmentTag | read-only | current | Current BSR Fragment Tag |
| 1.3.6.1.4.1.2272.1.8.16.5.3 | ScalarrcIpPimCurrBsrHashMask | read-only | current | Current BSR Hash Mask value |
| 1.3.6.1.4.1.2272.1.8.16.5.4 | ScalarrcIpPimCurrBsrPriority | read-only | current | Current BSR Priority |
| 1.3.6.1.4.1.2272.1.8.16.5.5 | ScalarrcIpPimCurrBsrBootStrapTimer | read-only | current | Current BSR Boot Strap Timer |
| 1.3.6.1.4.1.2272.1.8.16.6 | TablercIpPimVirtualNbrTable | not-accessible | current | Table listing the router's virtual PIM neighbors |
| 1.3.6.1.4.1.2272.1.8.16.6.1 | RowrcIpPimVirtualNbrEntry | not-accessible | current | An entry in the virtual PIM neighbors' table. |
| 1.3.6.1.4.1.2272.1.8.16.6.1.1 | ColumnrcIpPimVirtualNbrAddress | not-accessible | current | The IP address of the virtual PIM neighbor for which this entry contains information. |
| 1.3.6.1.4.1.2272.1.8.16.6.1.2 | ColumnrcIpPimVirtualNbrIfIndex | read-create | current | The value of ifIndex for the PIM interface in which this virtual neighbor is created. This value is mandatory while trying to create a virtual PIM neighbor. |
| 1.3.6.1.4.1.2272.1.8.16.6.1.3 | ColumnrcIpPimVirtualNbrRowStatus | read-create | current | To create/delete an entry in the virtual PIM neighbors' table. |
| 1.3.6.1.4.1.2272.1.8.16.7 | TablercIpPimActiveRPTable | not-accessible | current | The table lists the RPs being used for the active IP multicast groups. |
| 1.3.6.1.4.1.2272.1.8.16.7.1 | RowrcIpPimActiveRPEntry | not-accessible | current | An entry in the rcIpPimActiveRPTable. |
| 1.3.6.1.4.1.2272.1.8.16.7.1.1 | ColumnrcIpPimActiveRPGroupAddress | not-accessible | current | The active IP multicast group address |
| 1.3.6.1.4.1.2272.1.8.16.7.1.2 | ColumnrcIpPimActiveRPAddress | read-only | current | The address of the RP for the active multicast group |
| 1.3.6.1.4.1.2272.1.8.16.7.1.3 | ColumnrcIpPimActiveRPPriority | read-only | current | The priority of the RP. |
| 1.3.6.1.4.1.2272.1.8.17 | TablercIpMulticastArpTable | not-accessible | current | IP Multicast Arp table |
| 1.3.6.1.4.1.2272.1.8.17.1 | RowrcIpMulticastArpEntry | not-accessible | current | An entry of Ip Multicast Arp Table. |
| 1.3.6.1.4.1.2272.1.8.17.1.1 | ColumnrcIpMulticastArpVlanId | read-only | current | vlan id |
| 1.3.6.1.4.1.2272.1.8.17.1.2 | ColumnrcIpMulticastArpMacAddress | read-only | current | multicast mac address |
| 1.3.6.1.4.1.2272.1.8.17.1.3 | ColumnrcIpMulticastArpIpAddress | read-only | current | multicast ip address |
| 1.3.6.1.4.1.2272.1.8.17.1.4 | ColumnrcIpMulticastArpPorts | read-write | current | ports within a particular vlan |
| 1.3.6.1.4.1.2272.1.8.17.1.5 | ColumnrcIpMulticastArpNumMltIds | read-only | current | number of mlt ids |
| 1.3.6.1.4.1.2272.1.8.17.1.6 | ColumnrcIpMulticastArpMltIds | read-write | current | mlt id |
| 1.3.6.1.4.1.2272.1.8.17.1.7 | ColumnrcIpMulticastArpRowStatus | read-write | current | row status |
| 1.3.6.1.4.1.2272.1.8.18 | TablercIpMulticastTable | not-accessible | obsolete | Ip multicast table. |
| 1.3.6.1.4.1.2272.1.8.18.1 | RowrcIpMulticastEntry | not-accessible | obsolete | Entry containing Proprietary Ip Multicast information. |
| 1.3.6.1.4.1.2272.1.8.18.1.1 | ColumnrcIpMulticastIfIndex | read-only | obsolete | IfIndex. |
| 1.3.6.1.4.1.2272.1.8.18.1.2 | ColumnrcIpMulticastMulticastIp | read-write | obsolete | IP Address on this IfIndex to be used for all Multicast protocols running on this interface. |
| 1.3.6.1.4.1.2272.1.8.19 | NodercIpCops | |||
| 1.3.6.1.4.1.2272.1.8.19.1 | ScalarrcCopsGlobalEnable | read-write | obsolete | Cops feature enable/disable |
| 1.3.6.1.4.1.2272.1.8.20 | NodercIpRipInterface | |||
| 1.3.6.1.4.1.2272.1.8.20.1 | TablercIpRipInterfaceTable | not-accessible | current | IP Rip Interface table |
| 1.3.6.1.4.1.2272.1.8.20.1.1 | RowrcIpRipInterfaceEntry | not-accessible | current | An entry of Ip Rip Interface Table. |
| 1.3.6.1.4.1.2272.1.8.20.1.1.1 | ColumnrcIpRipInterfaceAddress | read-only | current | Ip Address |
| 1.3.6.1.4.1.2272.1.8.20.1.1.2 | ColumnrcIpRipInterfaceIfIndex | read-only | current | Rip Interface If Index. |
| 1.3.6.1.4.1.2272.1.8.20.1.1.3 | ColumnrcIpRipInterfaceRipEnable | read-write | current | |
| 1.3.6.1.4.1.2272.1.8.20.1.1.4 | ColumnrcIpRipInterfaceAccDefRte | read-write | current | |
| 1.3.6.1.4.1.2272.1.8.20.1.1.5 | ColumnrcIpRipInterfaceAdvDefRte | read-write | current | |
| 1.3.6.1.4.1.2272.1.8.20.1.1.6 | ColumnrcIpRipInterfaceAutoAggregate | read-write | current | |
| 1.3.6.1.4.1.2272.1.8.20.1.1.7 | ColumnrcIpRipInterfaceCost | read-write | current | |
| 1.3.6.1.4.1.2272.1.8.20.1.1.8 | ColumnrcIpRipInterfaceListen | read-write | current | |
| 1.3.6.1.4.1.2272.1.8.20.1.1.9 | ColumnrcIpRipInterfacePoison | read-write | current | |
| 1.3.6.1.4.1.2272.1.8.20.1.1.10 | ColumnrcIpRipInterfaceSupply | read-write | current | |
| 1.3.6.1.4.1.2272.1.8.20.1.1.11 | ColumnrcIpRipInterfaceTriggeredUpdate | read-write | current | |
| 1.3.6.1.4.1.2272.1.8.20.1.1.12 | ColumnrcIpRipInterfaceInPolicy | read-write | current | |
| 1.3.6.1.4.1.2272.1.8.20.1.1.13 | ColumnrcIpRipInterfaceOutPolicy | read-write | current | |
| 1.3.6.1.4.1.2272.1.8.20.1.1.14 | ColumnrcIpRipInterfaceProxyAnnounceFlag | read-write | current | |
| 1.3.6.1.4.1.2272.1.8.20.1.1.15 | ColumnrcIpRipInterfaceHolddown | read-write | current | Used to indicate the rip holddown timer for this interface |
| 1.3.6.1.4.1.2272.1.8.20.1.1.16 | ColumnrcIpRipInterfaceTimeout | read-write | current | Used to indicate the rip timeout interval for this interface |
| 1.3.6.1.4.1.2272.1.8.21 | TablercIpMulticastTimedPruneTable | not-accessible | current | This feature provides the ability for the user to create (S,G) Forwarding Entries that would not be pruned until a configurable timer expires. This feature is … |
| 1.3.6.1.4.1.2272.1.8.21.1 | RowrcIpMulticastTimedPruneEntry | not-accessible | current | An entry of Ip Multicast Timed Prune Table. |
| 1.3.6.1.4.1.2272.1.8.21.1.1 | ColumnrcIpMulticastTimedPruneGroupAddress | read-write | current | This field indicates the IP Multicast Group Address associated with the IP multicast stream. |
| 1.3.6.1.4.1.2272.1.8.21.1.2 | ColumnrcIpMulticastTimedPruneSourceAddress | read-write | current | This is the Source Subnet IP address of the sender of the IP multicast stream. |
| 1.3.6.1.4.1.2272.1.8.21.1.3 | ColumnrcIpMulticastTimedPruneSrcSubnetMask | read-write | current | This is the Source Subnet Mask IP address of the sender of the IP multicast stream. |
| 1.3.6.1.4.1.2272.1.8.21.1.4 | ColumnrcIpMulticastTimedPruneAgingTimer | read-write | current | This field represents the amount of time (in minutes) this timed prune entry will be kept in the forwarding table when there are no more receivers. After this … |
| 1.3.6.1.4.1.2272.1.8.21.1.5 | ColumnrcIpMulticastTimedPruneTimeLeft | read-only | current | This read-only field represents the remaining time for which this timed prune entry will be kept in the forwarding table. After this timer expires, this timed … |
| 1.3.6.1.4.1.2272.1.8.21.1.6 | ColumnrcIpMulticastTimedPruneLastActivity | read-only | current | This read-only field represents the actual time since the traffic has come from this Source, Group pair. |
| 1.3.6.1.4.1.2272.1.8.21.1.7 | ColumnrcIpMulticastTimedPruneRowStatus | read-write | current | row status |
| 1.3.6.1.4.1.2272.1.8.22 | TablercIpConfIcmpRdiscTable | not-accessible | current | A table used to maintain ICMP Route discovery information for a particular interface. |
| 1.3.6.1.4.1.2272.1.8.22.1 | RowrcIpConfIcmpRdiscEntry | not-accessible | current | Entry containing ICMP Rdisc information. An entry is automatically created in this table when routing is enabled for an interface -or- when an ip address is co… |
| 1.3.6.1.4.1.2272.1.8.22.1.1 | ColumnrcIpConfIcmpRdiscIfIndex | read-only | current | An unique value to identify a physical interface or a logical interface (VLAN). |
| 1.3.6.1.4.1.2272.1.8.22.1.2 | ColumnrcIpConfIcmpRdiscAdvAddress | read-write | current | Advertisement address to which the route discovery advertisements transmitted on this interface. |
| 1.3.6.1.4.1.2272.1.8.22.1.3 | ColumnrcIpConfIcmpRdiscAdvFlag | read-write | current | Flag to indicate whether or not the address is to be advertised on this interface. |
| 1.3.6.1.4.1.2272.1.8.22.1.4 | ColumnrcIpConfIcmpRdiscAdvLifetime | read-write | current | The value to be placed in the lifetime field of Router Advertisements sent from the interface. |
| 1.3.6.1.4.1.2272.1.8.22.1.5 | ColumnrcIpConfIcmpRdiscMaxAdvInterval | read-write | current | The maximum time allowed between sending Router Advertisements from this interface. |
| 1.3.6.1.4.1.2272.1.8.22.1.6 | ColumnrcIpConfIcmpRdiscMinAdvInterval | read-write | current | The minimum time allowed between sending Router Advertisements from this interface. |
| 1.3.6.1.4.1.2272.1.8.22.1.7 | ColumnrcIpConfIcmpRdiscPreferenceLevel | read-write | current | Preferability of the router address as a default Router |
| 1.3.6.1.4.1.2272.1.8.23 | NodercIpMulticastSoftwareForwarding | |||
| 1.3.6.1.4.1.2272.1.8.23.1 | ScalarrcIpMulticastSoftwareForwardingEnable | read-write | current | Enable/Disable multicast software forwarding. |
| 1.3.6.1.4.1.2272.1.8.23.2 | ScalarrcIpMulticastSoftwareForwardingThreshold | read-write | current | Threshold to switch from software forwarding to hardware forwarding. Unit = pkt per second |
| 1.3.6.1.4.1.2272.1.8.24 | NodercIpMrouteHw | |||
| 1.3.6.1.4.1.2272.1.8.24.1 | TablercIpMrouteHwTable | not-accessible | current | The (conceptual) table containing hardware entries of multicast routing information for all the Group Address. |
| 1.3.6.1.4.1.2272.1.8.24.1.1 | RowrcIpMrouteHwEntry | not-accessible | current | An entry (conceptual row) containing hardware entries of multicast routing information for a particular Group Address. |
| 1.3.6.1.4.1.2272.1.8.24.1.1.1 | ColumnrcIpMrouteHwGroupAddress | read-only | current | The IP multicast group address for which this entry contains multicast routing information. |
| 1.3.6.1.4.1.2272.1.8.24.1.1.2 | ColumnrcIpMrouteHwSubnet | read-only | current | The network address from where the source is sending the stream of traffic for which this entry contains multicast routing information. |
| 1.3.6.1.4.1.2272.1.8.24.1.1.3 | ColumnrcIpMrouteHwInvlan | read-only | current | The Ingress vlan Id from where the traffic is coming for which this entry contains multicast routing information. |
| 1.3.6.1.4.1.2272.1.8.24.1.1.4 | ColumnrcIpMrouteHwPruned | read-only | current | This is to show weather the entry containing multicast routing information has received Prune message or not. |
| 1.3.6.1.4.1.2272.1.8.24.1.1.5 | ColumnrcIpMrouteHwIndex | read-only | current | This Index value keep tracks of the hardware record that has been accessed for displaying the entry containing multicast routing information. |
| 1.3.6.1.4.1.2272.1.8.24.2 | TablercIpMrouteHwPrunesTable | not-accessible | current | The (conceptual) table containing prune entries of multicast routing information for the Group Address. |
| 1.3.6.1.4.1.2272.1.8.24.2.1 | RowrcIpMrouteHwPrunesEntry | not-accessible | current | An entry (conceptual row) containing prune entries of multicast routing information for a particular Group Address. |
| 1.3.6.1.4.1.2272.1.8.24.2.1.1 | ColumnrcIpMrouteHwPrunesGroupAddress | read-only | current | The IP multicast group address for which this entry contains multicast routing information. |
| 1.3.6.1.4.1.2272.1.8.24.2.1.2 | ColumnrcIpMrouteHwPrunesSubnet | read-only | current | The network address from where the source is sending the stream of traffic for which this entry contains multicast routing information. |
| 1.3.6.1.4.1.2272.1.8.24.2.1.3 | ColumnrcIpMrouteHwPrunesInvlan | read-only | current | The Ingress vlan Id from where the traffic is coming for which this entry contains multicast routing information. |
| 1.3.6.1.4.1.2272.1.8.24.2.1.4 | ColumnrcIpMrouteHwPrunesNeighbor | read-only | current | The IpAddress from where the Prune message has been received. |
| 1.3.6.1.4.1.2272.1.8.24.2.1.5 | ColumnrcIpMrouteHwPrunesTimer | read-only | current | This is to show how much time is left for this particular entry containing multicast routing information during which the graft message can be sent. |
| 1.3.6.1.4.1.2272.1.8.24.3 | TablercIpMrouteHwSourcesTable | not-accessible | current | The (conceptual) table containing source entries of multicast routing information for the Group Address. |
| 1.3.6.1.4.1.2272.1.8.24.3.1 | RowrcIpMrouteHwSourcesEntry | not-accessible | current | An entry (conceptual row) containing source entries of multicast routing information for a particular Group Address. |
| 1.3.6.1.4.1.2272.1.8.24.3.1.1 | ColumnrcIpMrouteHwSourcesGroupAddress | read-only | current | The IP multicast group address for which this entry contains multicast routing information. |
| 1.3.6.1.4.1.2272.1.8.24.3.1.2 | ColumnrcIpMrouteHwSourcesSubnet | read-only | current | The network address from where the source is sending the stream of traffic for which this entry contains multicast routing information. |
| 1.3.6.1.4.1.2272.1.8.24.3.1.3 | ColumnrcIpMrouteHwSourcesInvlan | read-only | current | The Ingress vlan Id from where the traffic is coming for which this entry contains multicast routing information. |
| 1.3.6.1.4.1.2272.1.8.24.3.1.4 | ColumnrcIpMrouteHwSourcesAddress | read-only | current | The Source Address from where the stream of traffic is reaching the corresponding Group Address for which this entry contains multicast routing information. |
| 1.3.6.1.4.1.2272.1.8.24.3.1.5 | ColumnrcIpMrouteHwSourcesIngressPort | read-only | current | The Ingress vlan ports from where the traffic is coming, for which this entry contains multicast routing information. |
| 1.3.6.1.4.1.2272.1.8.24.4 | TablercIpMrouteHwEgressVlansTable | not-accessible | current | The (conceptual) table containing egress vlan entries of multicast routing information for the Group Address. |
| 1.3.6.1.4.1.2272.1.8.24.4.1 | RowrcIpMrouteHwEgressVlansEntry | not-accessible | current | An entry (conceptual row) containing egress vlan entries of multicast routing information for a particular Group Address. |
| 1.3.6.1.4.1.2272.1.8.24.4.1.1 | ColumnrcIpMrouteHwEgressVlansGroupAddress | read-only | current | The IP multicast group address for which this entry contains multicast routing information. |
| 1.3.6.1.4.1.2272.1.8.24.4.1.2 | ColumnrcIpMrouteHwEgressVlansSubnet | read-only | current | The network address from where the source is sending the stream of traffic for which this entry contains multicast routing information. |
| 1.3.6.1.4.1.2272.1.8.24.4.1.3 | ColumnrcIpMrouteHwEgressVlansInvlan | read-only | current | The Ingress vlan Id from where the traffic is coming for which this entry contains multicast routing information. |
| 1.3.6.1.4.1.2272.1.8.24.4.1.4 | ColumnrcIpMrouteHwEgressVlansId | read-only | current | The Egress vlan Id from where the traffic is going out for which this entry contains multicast routing information |
| 1.3.6.1.4.1.2272.1.8.24.4.1.5 | ColumnrcIpMrouteHwEgressVlansPorts | read-only | current | he Egress vlan ports from where the traffic is going out for which this entry contains multicast routing information. |
| 1.3.6.1.4.1.2272.1.8.24.4.1.6 | ColumnrcIpMrouteHwEgressVlansIndex | read-only | current | This Index value keep tracks of the hardware record that has been accessed for displaying the entry containing multicast routing information. |
| 1.3.6.1.4.1.2272.1.8.25 | NodercIpResourceUsage | |||
| 1.3.6.1.4.1.2272.1.8.25.1 | NodercIpResourceUsageGlobal | |||
| 1.3.6.1.4.1.2272.1.8.25.1.1 | ScalarrcIpResourceUsageGlobalIngressRecInUse | read-only | current | Used to get the Ingress Record Usage in the switch. (S-G usage). |
| 1.3.6.1.4.1.2272.1.8.25.1.2 | ScalarrcIpResourceUsageGlobalEgressRecInUse | read-only | current | Used to get the Egress Record Usage in the switch (pepstream count). |
| 1.3.6.1.4.1.2272.1.8.25.1.3 | ScalarrcIpResourceUsageGlobalIngressThreshold | read-write | current | Used to get the threshold count for Ingress records. |
| 1.3.6.1.4.1.2272.1.8.25.1.4 | ScalarrcIpResourceUsageGlobalEgressThreshold | read-write | current | Used to get threshold count for egress records. |
| 1.3.6.1.4.1.2272.1.8.25.1.5 | ScalarrcIpResourceUsageGlobalSendTrapAndLog | read-write | current | A means of alerting the user. If this bool is set, a message will be send to console and also a duReport will be logged. |
| 1.3.6.1.4.1.2272.1.8.25.1.6 | ScalarrcIpResourceUsageGlobalSendTrapOnly | read-write | current | A means of alerting the user. If this bool is set, a message will be send to console. |
| 1.3.6.1.4.1.2272.1.8.25.1.7 | ScalarrcIpResourceUsageGlobalLogMsgOnly | read-write | current | A means of alerting the user.If this bool is set, a duReport will be logged. |
| 1.3.6.1.4.1.2272.1.8.26 | NodercIpRsmlt | |||
| 1.3.6.1.4.1.2272.1.8.26.1 | NodercIpRsmltGlobal | |||
| 1.3.6.1.4.1.2272.1.8.26.1.1 | ScalarrcIpRsmltGlobalTableSize | read-only | current | Route Smlt table size. |
| 1.3.6.1.4.1.2272.1.8.26.1.2 | ScalarrcIpRsmltEdgeSupportEnable | read-write | current | Used to enable/disable RSMLT Edge Support feature |
| 1.3.6.1.4.1.2272.1.8.26.2 | TablercIpRsmltOperTable | not-accessible | current | Route Smlt Table |
| 1.3.6.1.4.1.2272.1.8.26.2.1 | RowrcIpRsmltOperEntry | not-accessible | current | An entry of Ip As Path Access List Table. |
| 1.3.6.1.4.1.2272.1.8.26.2.1.1 | ColumnrcIpRsmltOperIfIndex | read-only | current | Route Smlt Oper IfIndex. |
| 1.3.6.1.4.1.2272.1.8.26.2.1.2 | ColumnrcIpRsmltOperAdminStatus | read-write | current | is a enable/disable flag. |
| 1.3.6.1.4.1.2272.1.8.26.2.1.3 | ColumnrcIpRsmltOperHoldDownTimer | read-write | current | Timer value, the range of value is from 0 to 3600. |
| 1.3.6.1.4.1.2272.1.8.26.2.1.4 | ColumnrcIpRsmltOperHoldDownTimeRemaining | read-only | current | The time value that indicate how much time remaining of HoldDownTimer. |
| 1.3.6.1.4.1.2272.1.8.26.2.1.5 | ColumnrcIpRsmltOperHoldUpTimer | read-write | current | The range of value 0 to 3600 or 9999. 9999 means infinity. |
| 1.3.6.1.4.1.2272.1.8.26.2.1.6 | ColumnrcIpRsmltOperHoldUpTimeRemaining | read-only | current | The time value that indicate how much time remaining of HoldUpTimer. |
| 1.3.6.1.4.1.2272.1.8.26.2.1.7 | ColumnrcIpRsmltOperIpAddr | read-only | current | IP Interface with RSMLT on. |
| 1.3.6.1.4.1.2272.1.8.26.2.1.8 | ColumnrcIpRsmltOperOperStatus | read-only | current | The operation status of Rsmlt, up or down. |
| 1.3.6.1.4.1.2272.1.8.26.2.1.9 | ColumnrcIpRsmltOperSmltId | read-only | current | The id range for SMLT is 1-32. |
| 1.3.6.1.4.1.2272.1.8.26.2.1.10 | ColumnrcIpRsmltOperSltId | read-only | current | The id range for SLT is 1-512. |
| 1.3.6.1.4.1.2272.1.8.26.2.1.11 | ColumnrcIpRsmltOperVlanId | read-only | current | Vlan id. |
| 1.3.6.1.4.1.2272.1.8.26.2.1.12 | ColumnrcIpRsmltOperMacAddr | read-only | current | Mac Address. |
| 1.3.6.1.4.1.2272.1.8.26.2.1.13 | ColumnrcIpRsmltOperRowStatus | read-write | current | Row Status. |
| 1.3.6.1.4.1.2272.1.8.26.2.1.14 | ColumnrcIpRsmltOperVrfId | read-only | current | Indicates the Virtual Router to which the RSMLT Oper instance belongs. |
| 1.3.6.1.4.1.2272.1.8.26.2.1.15 | ColumnrcIpRsmltOperVrfName | read-only | current | Name of the Virtual Router to which the RSMLT Oper instance belongs. |
| 1.3.6.1.4.1.2272.1.8.26.3 | TablercIpRsmltPeerTable | not-accessible | current | Route Smlt Table |
| 1.3.6.1.4.1.2272.1.8.26.3.1 | RowrcIpRsmltPeerEntry | not-accessible | current | An entry of Ip As Path Access List Table. |
| 1.3.6.1.4.1.2272.1.8.26.3.1.1 | ColumnrcIpRsmltPeerIfIndex | read-only | current | Route Smlt Oper IfIndex. |
| 1.3.6.1.4.1.2272.1.8.26.3.1.2 | ColumnrcIpRsmltPeerAdminStatus | read-only | current | is a enable/disable flag. |
| 1.3.6.1.4.1.2272.1.8.26.3.1.3 | ColumnrcIpRsmltPeerHoldDownTimer | read-only | current | Timer value, the range of value is from 0 to 3600. |
| 1.3.6.1.4.1.2272.1.8.26.3.1.4 | ColumnrcIpRsmltPeerHoldDownTimeRemaining | read-only | current | The time value that indicate how much time remaining of HoldDownTimer. |
| 1.3.6.1.4.1.2272.1.8.26.3.1.5 | ColumnrcIpRsmltPeerHoldUpTimer | read-only | current | The range of value 0 to 3600 or 9999. 9999 means infinity. |
| 1.3.6.1.4.1.2272.1.8.26.3.1.6 | ColumnrcIpRsmltPeerHoldUpTimeRemaining | read-only | current | The time value that indicate how much time remaining of HoldUpTimer. |
| 1.3.6.1.4.1.2272.1.8.26.3.1.7 | ColumnrcIpRsmltPeerIpAddr | read-only | current | IP Interface with RSMLT on. |
| 1.3.6.1.4.1.2272.1.8.26.3.1.8 | ColumnrcIpRsmltPeerOperStatus | read-only | current | The operation status of Rsmlt, up or down. |
| 1.3.6.1.4.1.2272.1.8.26.3.1.9 | ColumnrcIpRsmltPeerSmltId | read-only | current | The id range for SMLT is 1-32. |
| 1.3.6.1.4.1.2272.1.8.26.3.1.10 | ColumnrcIpRsmltPeerSltId | read-only | current | The id range for SLT is 1-512. |
| 1.3.6.1.4.1.2272.1.8.26.3.1.11 | ColumnrcIpRsmltPeerVlanId | read-only | current | Vlan id. |
| 1.3.6.1.4.1.2272.1.8.26.3.1.12 | ColumnrcIpRsmltPeerMacAddr | read-only | current | Mac Address. |
| 1.3.6.1.4.1.2272.1.8.26.3.1.13 | ColumnrcIpRsmltPeerVrfId | read-only | current | Indicates the Virtual Router to which the RSMLT Peer instance belongs. |
| 1.3.6.1.4.1.2272.1.8.26.3.1.14 | ColumnrcIpRsmltPeerVrfName | read-only | current | Name of the Virtual Router to which the RSMLT Peer instance belongs. |
| 1.3.6.1.4.1.2272.1.8.26.4 | TablercIpRsmltEdgePeerTable | not-accessible | current | RSMLT Edge Support Peer Info table. This table consists of the RSMLT Peers for which the switch will act as a PeerForwarder. |
| 1.3.6.1.4.1.2272.1.8.26.4.1 | RowrcIpRsmltEdgePeerEntry | not-accessible | current | RSMLT Edge Support Peer Info Entry |
| 1.3.6.1.4.1.2272.1.8.26.4.1.1 | ColumnrcIpRsmltEdgeVlanId | not-accessible | current | A value that uniquely identifies the Virtual LAN associated with this entry. |
| 1.3.6.1.4.1.2272.1.8.26.4.1.2 | ColumnrcIpRsmltEdgePeerIpAddress | read-only | current | IP address of the Peer RSMLT Interface. |
| 1.3.6.1.4.1.2272.1.8.26.4.1.3 | ColumnrcIpRsmltEdgePeerMacAddress | read-only | current | The MAC address of the Peer RSMLT interface. |
| 1.3.6.1.4.1.2272.1.8.26.4.1.4 | ColumnrcIpRsmltEdgePeerVrfId | read-only | current | Indicates the Virtual Router to which the RSMLT Edge Peer instance belongs. |
| 1.3.6.1.4.1.2272.1.8.26.4.1.5 | ColumnrcIpRsmltEdgePeerVrfName | read-only | current | Name of the Virtual Router to which the RSMLT Edge Peer instance belongs. |
| 1.3.6.1.4.1.2272.1.8.26.5 | TablercIpv6RsmltOperTable | not-accessible | current | Route Smlt Table |
| 1.3.6.1.4.1.2272.1.8.26.5.1 | RowrcIpv6RsmltOperEntry | not-accessible | current | A local IPv6 RSMLT entry |
| 1.3.6.1.4.1.2272.1.8.26.5.1.1 | ColumnrcIpv6RsmltOperIfIndex | not-accessible | current | Route Smlt Oper IfIndex. |
| 1.3.6.1.4.1.2272.1.8.26.5.1.2 | ColumnrcIpv6RsmltOperIpv6Addr | not-accessible | current | IPv6 Interface with RSMLT on. |
| 1.3.6.1.4.1.2272.1.8.26.5.1.3 | ColumnrcIpv6RsmltOperIpv6PrefixLength | not-accessible | current | IPv6 Prefix Length. |
| 1.3.6.1.4.1.2272.1.8.26.5.1.4 | ColumnrcIpv6RsmltOperAdminStatus | read-write | current | is a enable/disable flag. |
| 1.3.6.1.4.1.2272.1.8.26.5.1.5 | ColumnrcIpv6RsmltOperHoldDownTimer | read-write | current | Timer value, the range of value is from 0 to 3600. |
| 1.3.6.1.4.1.2272.1.8.26.5.1.6 | ColumnrcIpv6RsmltOperHoldDownTimeRemaining | read-only | current | The time value that indicate how much time remaining of HoldDownTimer. |
| 1.3.6.1.4.1.2272.1.8.26.5.1.7 | ColumnrcIpv6RsmltOperHoldUpTimer | read-write | current | The range of value 0 to 3600 or 9999. 9999 means infinity. |
| 1.3.6.1.4.1.2272.1.8.26.5.1.8 | ColumnrcIpv6RsmltOperHoldUpTimeRemaining | read-only | current | The time value that indicate how much time remaining of HoldUpTimer. |
| 1.3.6.1.4.1.2272.1.8.26.5.1.9 | ColumnrcIpv6RsmltOperOperStatus | read-only | current | The operation status of Rsmlt, up or down. |
| 1.3.6.1.4.1.2272.1.8.26.5.1.10 | ColumnrcIpv6RsmltOperSmltId | read-only | current | The id range for SMLT is 1-32. |
| 1.3.6.1.4.1.2272.1.8.26.5.1.11 | ColumnrcIpv6RsmltOperSltId | read-only | current | The id range for SLT is 1-512. |
| 1.3.6.1.4.1.2272.1.8.26.5.1.12 | ColumnrcIpv6RsmltOperVlanId | read-only | current | Vlan id. |
| 1.3.6.1.4.1.2272.1.8.26.5.1.13 | ColumnrcIpv6RsmltOperMacAddr | read-only | current | Mac Address. |
| 1.3.6.1.4.1.2272.1.8.26.5.1.14 | ColumnrcIpv6RsmltOperVrfId | read-only | current | Indicates the Virtual Router to which the RSMLT Oper instance belongs. |
| 1.3.6.1.4.1.2272.1.8.26.5.1.15 | ColumnrcIpv6RsmltOperVrfName | read-only | current | Name of the Virtual Router to which the RSMLT Oper instance belongs. |
| 1.3.6.1.4.1.2272.1.8.26.6 | TablercIpv6RsmltPeerTable | not-accessible | current | Route Smlt Peer Table |
| 1.3.6.1.4.1.2272.1.8.26.6.1 | RowrcIpv6RsmltPeerEntry | not-accessible | current | An entry of Ip As Path Access List Table. |
| 1.3.6.1.4.1.2272.1.8.26.6.1.1 | ColumnrcIpv6RsmltPeerIfIndex | not-accessible | current | Route Smlt Oper IfIndex. |
| 1.3.6.1.4.1.2272.1.8.26.6.1.2 | ColumnrcIpv6RsmltPeerIpv6Addr | not-accessible | current | IP Interface with RSMLT on. |
| 1.3.6.1.4.1.2272.1.8.26.6.1.3 | ColumnrcIpv6RsmltPeerIpv6PrefixLength | not-accessible | current | IPv6 Prefix Length |
| 1.3.6.1.4.1.2272.1.8.26.6.1.4 | ColumnrcIpv6RsmltPeerAdminStatus | read-only | current | is a enable/disable flag. |
| 1.3.6.1.4.1.2272.1.8.26.6.1.5 | ColumnrcIpv6RsmltPeerHoldDownTimer | read-only | current | Timer value, the range of value is from 0 to 3600. |
| 1.3.6.1.4.1.2272.1.8.26.6.1.6 | ColumnrcIpv6RsmltPeerHoldDownTimeRemaining | read-only | current | The time value that indicate how much time remaining of HoldDownTimer. |
| 1.3.6.1.4.1.2272.1.8.26.6.1.7 | ColumnrcIpv6RsmltPeerHoldUpTimer | read-only | current | The range of value 0 to 3600 or 9999. 9999 means infinity. |
| 1.3.6.1.4.1.2272.1.8.26.6.1.8 | ColumnrcIpv6RsmltPeerHoldUpTimeRemaining | read-only | current | The time value that indicate how much time remaining of HoldUpTimer. |
| 1.3.6.1.4.1.2272.1.8.26.6.1.9 | ColumnrcIpv6RsmltPeerOperStatus | read-only | current | The operation status of Rsmlt, up or down. |
| 1.3.6.1.4.1.2272.1.8.26.6.1.10 | ColumnrcIpv6RsmltPeerSmltId | read-only | current | The id range for SMLT is 1-32. |
| 1.3.6.1.4.1.2272.1.8.26.6.1.11 | ColumnrcIpv6RsmltPeerSltId | read-only | current | The id range for SLT is 1-512. |
| 1.3.6.1.4.1.2272.1.8.26.6.1.12 | ColumnrcIpv6RsmltPeerVlanId | read-only | current | Vlan id. |
| 1.3.6.1.4.1.2272.1.8.26.6.1.13 | ColumnrcIpv6RsmltPeerMacAddr | read-only | current | Mac Address. |
| 1.3.6.1.4.1.2272.1.8.26.6.1.14 | ColumnrcIpv6RsmltPeerVrfId | read-only | current | Indicates the Virtual Router to which the RSMLT Peer instance belongs. |
| 1.3.6.1.4.1.2272.1.8.26.6.1.15 | ColumnrcIpv6RsmltPeerVrfName | read-only | current | Name of the Virtual Router to which the RSMLT Peer instance belongs. |
| 1.3.6.1.4.1.2272.1.8.26.7 | TablercIpv6RsmltEdgePeerTable | not-accessible | current | RSMLT Edge Support Peer Info table. This table consists of the RSMLT Peers for which the switch will act as a PeerForwarder. |
| 1.3.6.1.4.1.2272.1.8.26.7.1 | RowrcIpv6RsmltEdgePeerEntry | not-accessible | current | RSMLT Edge Support Peer Info Entry |
| 1.3.6.1.4.1.2272.1.8.26.7.1.1 | ColumnrcIpv6RsmltEdgePeerVlanId | not-accessible | current | A value that uniquely identifies the Virtual LAN associated with this entry. |
| 1.3.6.1.4.1.2272.1.8.26.7.1.2 | ColumnrcIpv6RsmltEdgePeerIpv6Address | not-accessible | current | IP address of the Peer RSMLT Interface. |
| 1.3.6.1.4.1.2272.1.8.26.7.1.3 | ColumnrcIpv6RsmltEdgePeerIpv6PrefixLength | not-accessible | current | If set then this prefix can be used for address autoconfig, passed opaquely to Infinity |
| 1.3.6.1.4.1.2272.1.8.26.7.1.4 | ColumnrcIpv6RsmltEdgePeerMacAddress | read-only | current | The MAC address of the Peer RSMLT interface. |
| 1.3.6.1.4.1.2272.1.8.26.7.1.5 | ColumnrcIpv6RsmltEdgePeerVrfId | read-only | current | Indicates the Virtual Router to which the RSMLT Edge Peer instance belongs. |
| 1.3.6.1.4.1.2272.1.8.26.7.1.6 | ColumnrcIpv6RsmltEdgePeerVrfName | read-only | current | Name of the Virtual Router to which the RSMLT Edge Peer instance belongs. |
| 1.3.6.1.4.1.2272.1.8.26.7.1.7 | ColumnrcIpv6RsmltEdgePeerIsRaPrefix | read-only | current | True if this is a Router Advertisement prefix, False if this is a global address. |
| 1.3.6.1.4.1.2272.1.8.26.7.1.8 | ColumnrcIpv6RsmltEdgePeerConfType | read-only | current | Type of configured address, passed opaquely to Infinity |
| 1.3.6.1.4.1.2272.1.8.26.7.1.9 | ColumnrcIpv6RsmltEdgePeerNoAdvertise | read-only | current | True if advertisement of this prefix is disabled, passed opaquely to Infinity |
| 1.3.6.1.4.1.2272.1.8.26.7.1.10 | ColumnrcIpv6RsmltEdgePeerOspf6Advertise | read-only | current | True if OSPFv3 advertisement of this prefix is enabled, passed opaquely to Infinity |
| 1.3.6.1.4.1.2272.1.8.26.7.1.11 | ColumnrcIpv6RsmltEdgePeerPrefCandidate | read-only | current | True if address is considered for preferred selection, passed opaquely to Infinity |
| 1.3.6.1.4.1.2272.1.8.26.7.1.12 | ColumnrcIpv6RsmltEdgePeerPfxValidLife | read-only | current | Valid lifetime in seconds, passed opaquely to Infinity |
| 1.3.6.1.4.1.2272.1.8.26.7.1.13 | ColumnrcIpv6RsmltEdgePeerPfxPrefLife | read-only | current | Preferred lifetime in seconds, passed opaquely to Infinity |
| 1.3.6.1.4.1.2272.1.8.26.7.1.14 | ColumnrcIpv6RsmltEdgePeerPfxOnLinkFlag | read-only | current | If set then this prefix can be used for onlink determination, passed opaquely to Infinity |
| 1.3.6.1.4.1.2272.1.8.26.7.1.15 | ColumnrcIpv6RsmltEdgePeerPfxAutoFlag | read-only | current | If set then this prefix can be used for address autoconfig, passed opaquely to Infinity |
| 1.3.6.1.4.1.2272.1.8.27 | NodercIpVpn | |||
| 1.3.6.1.4.1.2272.1.8.27.1 | ScalarrcIpVpnRouteDistinguisherTableSize | read-only | current | Size of Route Distinguisher Table |
| 1.3.6.1.4.1.2272.1.8.27.2 | TablercIpVpnRouteDistinguisherTable | not-accessible | current | The Route Distinguisher Table is a table of entries. |
| 1.3.6.1.4.1.2272.1.8.27.2.1 | RowrcIpVpnRouteDistinguisherEntry | not-accessible | current | The table contains route distinguisher entry for ipvpn. A route distinguisher entry can be of two types: Type 0 and Type 1. Each type is comprised as follows: … |
| 1.3.6.1.4.1.2272.1.8.27.2.1.1 | ColumnrcIpVpnVrfId | not-accessible | current | The VrfId is the unique identifier of the rcIpVpnRouteDistinguisherTable. It is unique because there is only one Route-Distinguisher per Vrf i.e. there is a on… |
| 1.3.6.1.4.1.2272.1.8.27.2.1.2 | ColumnrcIpVpnRouteDistinguisherType | read-only | current | The route distinguisher can be of the type Ipaddress or AS number (Autonomous System) number. |
| 1.3.6.1.4.1.2272.1.8.27.2.1.3 | ColumnrcIpVpnRouteDistinguisherAddress | read-create | current | The IpAddress is required along with the Assigned number to create a route-distinguisher entry. |
| 1.3.6.1.4.1.2272.1.8.27.2.1.4 | ColumnrcIpVpnRouteDistinguisherAsNumber | read-create | current | The AS (Autonomous System) number is required along with the Assigned number to create a route-distinguisher entry. |
| 1.3.6.1.4.1.2272.1.8.27.2.1.5 | ColumnrcIpVpnRouteDistinguisherAssignedNum | read-create | current | The assigned number is used in combination with the IpAddress or the AS number to create an entry for the route-distinguisher. |
| 1.3.6.1.4.1.2272.1.8.27.2.1.6 | ColumnrcIpVpnRouteDistinguisherRowStatus | read-create | current | Row Status for the Route Distinguisher Table. |
| 1.3.6.1.4.1.2272.1.8.27.3 | ScalarrcIpVpnRouteTargetTableSize | read-only | current | Size of Route Target Table |
| 1.3.6.1.4.1.2272.1.8.27.4 | TablercIpVpnRouteTargetTable | not-accessible | current | This table specifies per-VRF route target association. |
| 1.3.6.1.4.1.2272.1.8.27.4.1 | RowrcIpVpnRouteTargetEntry | not-accessible | current | An entry in this table is created for each route target configured for a VRF supporting a MPLS/BGP VPN instance. |
| 1.3.6.1.4.1.2272.1.8.27.4.1.1 | ColumnrcIpVpnRouteTargetIndex | not-accessible | current | The Route Target Index is a unique value for the rcIpVpnRouteTargetTable. It is an incremental integer value. |
| 1.3.6.1.4.1.2272.1.8.27.4.1.2 | ColumnrcIpVpnRouteTargetType | read-only | current | The route target entry is identified on the basis of ipaddress for Autonomous System number. |
| 1.3.6.1.4.1.2272.1.8.27.4.1.3 | ColumnrcIpVpnRouteTargetIpAddress | read-create | current | The IpAddress is required along with the Assigned number to create a route-target entry. |
| 1.3.6.1.4.1.2272.1.8.27.4.1.4 | ColumnrcIpVpnRouteTargetAsNumber | read-create | current | The AS (Autonomous System) number is required along with the Assigned number to create a route-target entry. |
| 1.3.6.1.4.1.2272.1.8.27.4.1.5 | ColumnrcIpVpnRouteTargetAssignedNum | read-create | current | The assigned number is used in combination with the IpAddress or the AS number to create an entry for the route-target table. |
| 1.3.6.1.4.1.2272.1.8.27.4.1.6 | ColumnrcIpVpnRouteTargetRowStatus | read-create | current | Table Row Status. |
| 1.3.6.1.4.1.2272.1.8.28 | NodercIpDhcpForwardingScalars | |||
| 1.3.6.1.4.1.2272.1.8.28.1 | ScalarrcIpDhcpForwardingEnabled | read-write | current | Indicates whether DHCP forwarding is globally enabled. |
| 1.3.6.1.4.1.2272.1.8.28.2 | ScalarrcIpDhcpForwardingOption82Enabled | read-write | current | Indicates whether the use of DHCP option 82 is enabled. |
| 1.3.6.1.4.1.2272.1.8.28.3 | ScalarrcIpDhcpForwardingMaxFrameLength | read-write | current | Maximum DHCP frame length. |
| 1.3.6.1.4.1.2272.1.8.28.4 | ScalarrcIpDhcpForwardingOption82RemoteId | read-write | current | This object is used to control what value will be used for the DHCP option 82 remote-id suboption. |
| 1.3.6.1.4.1.2272.1.8.28.5 | ScalarrcIpDhcpForwardingOption82RemoteIdString | read-write | current | This object is used to set the string wich will be used for the value of the DHCP option 82 remote-id when the value of rcIpDhcpForwardingOption82RemoteId is s… |
| 1.3.6.1.4.1.2272.1.8.29 | TablercIpDhcpOp82StatsTable | not-accessible | current | DHCP statistics table for Relay Agent Information Option |
| 1.3.6.1.4.1.2272.1.8.29.1 | RowrcIpDhcpOp82StatsEntry | not-accessible | current | Used to see current statistics on interfaces that have DHCP Option 82 (Relay Agent Information) enabled. This table is read-only. |
| 1.3.6.1.4.1.2272.1.8.29.1.1 | ColumnrcIpDhcpOp82StatsIfIndex | not-accessible | current | Interface number. The number can represent either a physical or logical(VLAN) interface. |
| 1.3.6.1.4.1.2272.1.8.29.1.2 | ColumnrcIpDhcpOp82StatsFoundOp82 | read-only | current | Represents the number of packets received on the interface that already had Dhcp Option 82 inserted in them |
| 1.3.6.1.4.1.2272.1.8.29.1.3 | ColumnrcIpDhcpOp82StatsDropped | read-only | current | Represents the number of packets dropped because of reasons related to Dhcp Option 82. These reasons could be that the packet was received from an untrusted so… |
| 1.3.6.1.4.1.2272.1.8.29.1.4 | ColumnrcIpDhcpOp82StatsCircuitId | read-only | current | Represents the value of CircuitId inserted in the packets. This is the Port number of the Dhcp Relay. |
| 1.3.6.1.4.1.2272.1.8.29.1.5 | ColumnrcIpDhcpOp82StatsAddedCircuitId | read-only | current | Represents the number of packets which had CircuitId inserted on this interface |
| 1.3.6.1.4.1.2272.1.8.29.1.6 | ColumnrcIpDhcpOp82StatsRemovedCircuitId | read-only | current | Represents the number of packets which had CircuitId removed on this interface |
| 1.3.6.1.4.1.2272.1.8.29.1.7 | ColumnrcIpDhcpOp82StatsRemoteId | read-only | current | Represents the value of RemoteId inserted in the packets. This is the Mac address of the Dhcp Relay. |
| 1.3.6.1.4.1.2272.1.8.29.1.8 | ColumnrcIpDhcpOp82StatsAddedRemoteId | read-only | current | Represents the number of packets which had RemoteId inserted on this interface |
| 1.3.6.1.4.1.2272.1.8.29.1.9 | ColumnrcIpDhcpOp82StatsRemovedRemoteId | read-only | current | Represents the number of packets which had RemoteId removed on this interface |
| 1.3.6.1.4.1.2272.1.8.29.1.10 | ColumnrcIpDhcpOp82StatsAgentAddr | read-only | current | The IP address configured as relay on this interface; it is either the IP of the physical interface or the IP of the VRRP address |
| 1.3.6.1.4.1.2272.1.8.30 | TablercIpNetToMediaTable | not-accessible | current | The IP Address Translation table used for mapping from IP addresses to physical addresses. |
| 1.3.6.1.4.1.2272.1.8.30.1 | RowrcIpNetToMediaEntry | not-accessible | current | Each entry contains one IpAddress to `physical' address equivalence. |
| 1.3.6.1.4.1.2272.1.8.30.1.1 | ColumnrcIpNetToMediaNetAddress | not-accessible | current | The IpAddress corresponding to the media- dependent `physical' address. |
| 1.3.6.1.4.1.2272.1.8.30.1.2 | ColumnrcIpNetToMediaIfIndex | not-accessible | current | The interface on which this entry's equivalence is effective. The interface identified by a particular value of this index is the same interface as identified … |
| 1.3.6.1.4.1.2272.1.8.30.1.3 | ColumnrcIpNetToMediaPhysAddress | read-create | current | The media-dependent `physical' address. |
| 1.3.6.1.4.1.2272.1.8.30.1.4 | ColumnrcIpNetToMediaType | read-only | current | The is ARP entry type field. |
| 1.3.6.1.4.1.2272.1.8.30.1.5 | ColumnrcIpNetToMediaTimeToLive | read-only | current | This is TTL (time to live) field. |
| 1.3.6.1.4.1.2272.1.8.30.1.6 | ColumnrcIpNetToMediaRowStatus | read-create | current | Table row status. |
| 1.3.6.1.4.1.2272.1.8.30.1.7 | ColumnrcIpNetToMediaDestIfIndex | read-create | current | Destination IfIndex. |
| 1.3.6.1.4.1.2272.1.8.30.1.8 | ColumnrcIpNetToMediaDestVlanId | read-only | current | Destination VlanId. |
| 1.3.6.1.4.1.2272.1.8.30.1.9 | ColumnrcIpNetToMediaBMac | read-only | current | If the rcIpNetToMediaEntry is learned from a SPBM network, instead of using port to track where the rcIpNetToMediaNetAddress come from, the backbone MAC addres… |
| 1.3.6.1.4.1.2272.1.8.30.1.10 | ColumnrcIpNetToMediaDestCvid | read-only | current | Used to identify customer vid of the switched uni port of this entry is associated with. 4095 is not used. 4096 is reserved for untagged case. |
| 1.3.6.1.4.1.2272.1.8.31 | TablercIpMvpnTable | not-accessible | current | Table required to configure mvpn |
| 1.3.6.1.4.1.2272.1.8.31.1 | RowrcIpMvpnTableEntry | not-accessible | current | Entries in this table are per rcVrfId. |
| 1.3.6.1.4.1.2272.1.8.31.1.1 | ColumnrcIpMvpnVrfId | not-accessible | current | The VrfId serves as the Index for rcVrfIpMvpnTableEntry |
| 1.3.6.1.4.1.2272.1.8.31.1.2 | ColumnrcIpMvpnEnable | read-write | current | The status of mvpn on a vrf. |
| 1.3.6.1.4.1.2272.1.8.31.1.3 | ColumnrcIpMvpnFwdCacheTimeout | read-write | current | Mvpn Fwd Cache Timeout in seconds |
| 1.3.6.1.4.1.2272.1.8.100 | NodercIpGenPolicy | |||
| 1.3.6.1.4.1.2272.1.8.100.1 | ScalarrcIpAsPathAccessListTableSize | read-only | current | table size |
| 1.3.6.1.4.1.2272.1.8.100.2 | TablercIpAsPathAccessListTable | not-accessible | current | IP As Path Access List table |
| 1.3.6.1.4.1.2272.1.8.100.2.1 | RowrcIpAsPathAccessListEntry | not-accessible | current | An entry of Ip As Path Access List Table. |
| 1.3.6.1.4.1.2272.1.8.100.2.1.1 | ColumnrcIpAsPathAccessListId | read-only | current | Path Access List entry Id. |
| 1.3.6.1.4.1.2272.1.8.100.2.1.2 | ColumnrcIpAsPathAccessListMemberId | read-only | current | frq. at which hello sent. |
| 1.3.6.1.4.1.2272.1.8.100.2.1.3 | ColumnrcIpAsPathAccessListMode | read-write | current | Path Access List Mode, permit or deny. |
| 1.3.6.1.4.1.2272.1.8.100.2.1.4 | ColumnrcIpAsPathAccessListAsRegularExpression | read-write | current | IP Path Access List Regular Expression |
| 1.3.6.1.4.1.2272.1.8.100.2.1.5 | ColumnrcIpAsPathAccessListRowStatus | read-write | current | Table row status. |
| 1.3.6.1.4.1.2272.1.8.100.3 | ScalarrcIpCommunityAccessListTableSize | read-only | current | table size |
| 1.3.6.1.4.1.2272.1.8.100.4 | TablercIpCommunityAccessListTable | not-accessible | current | IP CommunityAccess List table |
| 1.3.6.1.4.1.2272.1.8.100.4.1 | RowrcIpCommunityAccessListEntry | not-accessible | current | An entry of Ip CommunityAccess List Table. |
| 1.3.6.1.4.1.2272.1.8.100.4.1.1 | ColumnrcIpCommunityAccessListId | read-only | current | IP CommunityAccess entry List Id |
| 1.3.6.1.4.1.2272.1.8.100.4.1.2 | ColumnrcIpCommunityAccessListMemberId | read-only | current | frq. at which hello sent. |
| 1.3.6.1.4.1.2272.1.8.100.4.1.3 | ColumnrcIpCommunityAccessListMode | read-write | current | IP Community Access List Mode, permit or deny. |
| 1.3.6.1.4.1.2272.1.8.100.4.1.4 | ColumnrcIpCommunityAccessListCommunity | read-write | current | IP Community Access List Community string. |
| 1.3.6.1.4.1.2272.1.8.100.4.1.5 | ColumnrcIpCommunityAccessListRowStatus | read-write | current | IP Community Access Table Row Status. |
| 1.3.6.1.4.1.2272.1.8.100.5 | ScalarrcIpAccessListTableSize | read-only | current | table size |
| 1.3.6.1.4.1.2272.1.8.100.6 | TablercIpAccessListTable | not-accessible | current | IP Access List table |
| 1.3.6.1.4.1.2272.1.8.100.6.1 | RowrcIpAccessListEntry | not-accessible | current | An entry of Ip Access List Table. |
| 1.3.6.1.4.1.2272.1.8.100.6.1.1 | ColumnrcIpAccessListId | read-only | current | |
| 1.3.6.1.4.1.2272.1.8.100.6.1.2 | ColumnrcIpAccessListMode | read-only | current | |
| 1.3.6.1.4.1.2272.1.8.100.6.1.3 | ColumnrcIpAccessListNetwork | read-write | current | |
| 1.3.6.1.4.1.2272.1.8.100.6.1.4 | ColumnrcIpAccessListNetworkMask | read-write | current | |
| 1.3.6.1.4.1.2272.1.8.100.6.1.5 | ColumnrcIpAccessListName | read-write | current | |
| 1.3.6.1.4.1.2272.1.8.100.6.1.6 | ColumnrcIpAccessListRowStatus | read-write | current | |
| 1.3.6.1.4.1.2272.1.8.100.7 | ScalarrcIpExtendedAccessListTableSize | read-only | current | table size |
| 1.3.6.1.4.1.2272.1.8.100.8 | TablercIpExtendedAccessListTable | not-accessible | current | IP Extended Access List table |
| 1.3.6.1.4.1.2272.1.8.100.8.1 | RowrcIpExtendedAccessListEntry | not-accessible | current | An entry of Ip Extended Access List Table. |
| 1.3.6.1.4.1.2272.1.8.100.8.1.1 | ColumnrcIpExtendedAccessListId | read-only | current | |
| 1.3.6.1.4.1.2272.1.8.100.8.1.2 | ColumnrcIpExtendedAccessListMode | read-only | current | |
| 1.3.6.1.4.1.2272.1.8.100.8.1.3 | ColumnrcIpExtendedAccessListNetwork | read-only | current | |
| 1.3.6.1.4.1.2272.1.8.100.8.1.4 | ColumnrcIpExtendedAccessListNetworkWildCard | read-only | current | |
| 1.3.6.1.4.1.2272.1.8.100.8.1.5 | ColumnrcIpExtendedAccessListNetworkMask | read-only | current | |
| 1.3.6.1.4.1.2272.1.8.100.8.1.6 | ColumnrcIpExtendedAccessListNetworkMaskWildCard | read-only | current | |
| 1.3.6.1.4.1.2272.1.8.100.8.1.7 | ColumnrcIpExtendedAccessListName | read-write | current | |
| 1.3.6.1.4.1.2272.1.8.100.8.1.8 | ColumnrcIpExtendedAccessListRowStatus | read-write | current | |
| 1.3.6.1.4.1.2272.1.8.100.9 | ScalarrcIpPrefixListTableSize | read-only | current | table size |
| 1.3.6.1.4.1.2272.1.8.100.10 | TablercIpPrefixListTable | not-accessible | current | IP Prefix List table |
| 1.3.6.1.4.1.2272.1.8.100.10.1 | RowrcIpPrefixListEntry | not-accessible | current | An entry of Ip Prefix List Table. |
| 1.3.6.1.4.1.2272.1.8.100.10.1.1 | ColumnrcIpPrefixListId | read-only | current | ListId |
| 1.3.6.1.4.1.2272.1.8.100.10.1.2 | ColumnrcIpPrefixListPrefix | read-only | current | Is a member of a specific prefix list. Adding the prefix to the given prefix list |
| 1.3.6.1.4.1.2272.1.8.100.10.1.3 | ColumnrcIpPrefixListPrefixMaskLen | read-only | current | prefix mask length |
| 1.3.6.1.4.1.2272.1.8.100.10.1.4 | ColumnrcIpPrefixListMaskLenFrom | read-write | current | used with mask len |
| 1.3.6.1.4.1.2272.1.8.100.10.1.5 | ColumnrcIpPrefixListMaskLenUpto | read-write | current | used with mask len |
| 1.3.6.1.4.1.2272.1.8.100.10.1.6 | ColumnrcIpPrefixListName | read-write | current | list name |
| 1.3.6.1.4.1.2272.1.8.100.10.1.7 | ColumnrcIpPrefixListRowStatus | read-write | current | row status |
| 1.3.6.1.4.1.2272.1.8.100.11 | ScalarrcIpRoutePolicyTableSize | read-only | current | table size |
| 1.3.6.1.4.1.2272.1.8.100.12 | ScalarrcIpRoutePolicyApply | read-write | current | Used to apply Ip Route Policy |
| 1.3.6.1.4.1.2272.1.8.100.13 | TablercIpRoutePolicyTable | not-accessible | current | IP Route Map table |
| 1.3.6.1.4.1.2272.1.8.100.13.1 | RowrcIpRoutePolicyEntry | not-accessible | current | An entry of Ip Route Map Table. |
| 1.3.6.1.4.1.2272.1.8.100.13.1.1 | ColumnrcIpRoutePolicyId | read-only | current | Index used to identify a group of policies in the route policy tableRoute map id |
| 1.3.6.1.4.1.2272.1.8.100.13.1.2 | ColumnrcIpRoutePolicySequenceNumber | read-only | current | second index used to identify a specific policy with in the route policy group (grouped by Id). This field allows users to specify different MATCH, SET paramet… |
| 1.3.6.1.4.1.2272.1.8.100.13.1.3 | ColumnrcIpRoutePolicyName | read-write | current | Is used to group a set of policies with different sequence number. Id & Name have one-on-one relationship. Different policy groups can contain same sequence nu… |
| 1.3.6.1.4.1.2272.1.8.100.13.1.4 | ColumnrcIpRoutePolicyEnable | read-write | current | Value specified here indicate whether this policy is enabled or not. If disabled policy sould not be used. |
| 1.3.6.1.4.1.2272.1.8.100.13.1.5 | ColumnrcIpRoutePolicyMode | read-write | current | specifies the action to be taken when this policy is selected for a specific route. This can be permit or deny or continue. Permit indicates allow the route, d… |
| 1.3.6.1.4.1.2272.1.8.100.13.1.6 | ColumnrcIpRoutePolicyMatchProtocol | read-write | current | Match protocol. Used for RIP and DVMRP announce policy only. Value is one of multiple (logical 'OR) of the following values: direct(1), static(2), rip(4), ospf… |
| 1.3.6.1.4.1.2272.1.8.100.13.1.7 | ColumnrcIpRoutePolicyMatchAsPath | read-write | current | Applicable to BGP protocol only. Match the BGP autonomous system path. This will override the BGP neighbor filter list info. |
| 1.3.6.1.4.1.2272.1.8.100.13.1.8 | ColumnrcIpRoutePolicyMatchCommunity | read-write | current | Applicable to BGP protocol only. Filter incoming/outgoing updates based on communities. |
| 1.3.6.1.4.1.2272.1.8.100.13.1.9 | ColumnrcIpRoutePolicyMatchCommunityExact | read-write | current | If enabled indicates the match has be an exact (i.e., all of the communities specified in the path has to be matched). |
| 1.3.6.1.4.1.2272.1.8.100.13.1.10 | ColumnrcIpRoutePolicyMatchNetwork | read-write | current | can specify one or more prefix list name or id(s) |
| 1.3.6.1.4.1.2272.1.8.100.13.1.11 | ColumnrcIpRoutePolicyMatchIpRouteSource | read-write | current | In case of Rip routes this is equivalent to RipInterface. In case of DVMRP routes this is equivalent to DVMRP gateway. Can specify one or more prefix list name… |
| 1.3.6.1.4.1.2272.1.8.100.13.1.12 | ColumnrcIpRoutePolicyMatchNextHop | read-write | current | In case of Rip routes this is equivalent to RipInterface. In case of DVMRP routes this is equivalent to DVMRP gateway. Can specify one or more prefix list name… |
| 1.3.6.1.4.1.2272.1.8.100.13.1.13 | ColumnrcIpRoutePolicyMatchInterface | read-write | current | Match received interface. Only for rip routes. Ignored in all other cases. |
| 1.3.6.1.4.1.2272.1.8.100.13.1.14 | ColumnrcIpRoutePolicyMatchRouteType | read-write | current | For BGP this choice refers to locally generated routes external routes learned via ebgp nbr. For OSPF internal refers to intra and inter area routes (belongs t… |
| 1.3.6.1.4.1.2272.1.8.100.13.1.15 | ColumnrcIpRoutePolicyMatchMetric | read-write | current | Match mec field in the incoming advertisement. |
| 1.3.6.1.4.1.2272.1.8.100.13.1.16 | ColumnrcIpRoutePolicyMatchTag | read-write | current | specifies a list of tag(s), that will be used during the match criteria process.contains one or more tag values.. |
| 1.3.6.1.4.1.2272.1.8.100.13.1.17 | ColumnrcIpRoutePolicySetRoutePreference | read-write | current | if non-zero specifies the route preference value to be assigned to the routes that applies this policy.contains one or more tag values.. |
| 1.3.6.1.4.1.2272.1.8.100.13.1.18 | ColumnrcIpRoutePolicySetAsPath | read-write | current | The AS path vaule to be used whether the SetAsPathMode is Tag or Prepend.as-path string.. |
| 1.3.6.1.4.1.2272.1.8.100.13.1.19 | ColumnrcIpRoutePolicySetAsPathMode | read-write | current | It can be either tag or prepend tag. applicable only while redistributing routes to BGP.Converts the tag of a route into AS path. |
| 1.3.6.1.4.1.2272.1.8.100.13.1.20 | ColumnrcIpRoutePolicySetAutomaticTag | read-write | current | |
| 1.3.6.1.4.1.2272.1.8.100.13.1.21 | ColumnrcIpRoutePolicySetCommunityNumber | read-write | current | this value can be a number (1..42949672000) or no-export or no-advertise. Applicable to BGP advertisments.community number. |
| 1.3.6.1.4.1.2272.1.8.100.13.1.22 | ColumnrcIpRoutePolicySetCommunityMode | read-write | current | this value can be either append or none unchanged - keep the community attribute in the route path as it is. none - remove the community in the route path addi… |
| 1.3.6.1.4.1.2272.1.8.100.13.1.23 | ColumnrcIpRoutePolicySetMetricTypeInternal | read-write | current | Indicates to set the MED value for routes advertised to ebgp nbrs to the IGP metric value. |
| 1.3.6.1.4.1.2272.1.8.100.13.1.24 | ColumnrcIpRoutePolicySetMetric | read-write | current | Value of the metric to be used while sending an update for the routes that match the matching criteria in this route policy. Default - 0 indicates the internal… |
| 1.3.6.1.4.1.2272.1.8.100.13.1.25 | ColumnrcIpRoutePolicySetMetricType | read-write | current | Metric type for the routes to be imported into OSPF routing protocol, which passed the matching criteria configured in this route policy. |
| 1.3.6.1.4.1.2272.1.8.100.13.1.26 | ColumnrcIpRoutePolicySetNextHop | read-write | current | IpAddress of the next hop router. Ignored for DVMRP routes. |
| 1.3.6.1.4.1.2272.1.8.100.13.1.27 | ColumnrcIpRoutePolicySetOrigin | read-write | current | igp/egp/incomplete Applicable to BGP protocol only. If not set uses the route origin from the Ip routing table (protocol). |
| 1.3.6.1.4.1.2272.1.8.100.13.1.28 | ColumnrcIpRoutePolicySetLocalPref | read-write | current | this value will be used during route decision process in the BGP protocol. Applicable to BGP only. |
| 1.3.6.1.4.1.2272.1.8.100.13.1.29 | ColumnrcIpRoutePolicySetOriginEgpAs | read-write | current | indicates the Remote autonomous sys number. Applicable to BGP only. |
| 1.3.6.1.4.1.2272.1.8.100.13.1.30 | ColumnrcIpRoutePolicySetTag | read-write | current | Value to be used for setting tag of the destination routing protocol. If not specified forward the tag value in the source routing protocol. Value 0 indicates … |
| 1.3.6.1.4.1.2272.1.8.100.13.1.31 | ColumnrcIpRoutePolicySetWeight | read-write | current | Should be using with match as-path condition. Weight value for the routing table. For BGP this value will override the weight configured through NetworkTableEn… |
| 1.3.6.1.4.1.2272.1.8.100.13.1.32 | ColumnrcIpRoutePolicySetInjectNetList | read-write | current | specifies the prefix list to be used either for injecting the routes into the routing table or to include the networks in the advertisement. Ignored for DVMRP. |
| 1.3.6.1.4.1.2272.1.8.100.13.1.33 | ColumnrcIpRoutePolicyRowStatus | read-write | current | row status |
| 1.3.6.1.4.1.2272.1.8.100.13.1.34 | ColumnrcIpRoutePolicySetMask | read-write | current | Set Mask Ip Address |
| 1.3.6.1.4.1.2272.1.8.100.13.1.35 | ColumnrcIpRoutePolicyNssaPbit | read-write | current | Set/Reset P bit in specified type 7 LSA. By default P bit is always set in case user set it to disable state for particular route policy than all type 7 LSAs a… |
| 1.3.6.1.4.1.2272.1.8.100.13.1.36 | ColumnrcIpRoutePolicyMatchVrf | read-write | current | An array used to identify which source VRFs have leaked routes to the local VRF |
| 1.3.6.1.4.1.2272.1.8.100.13.1.37 | ColumnrcIpRoutePolicyMatchExtCommunity | read-create | current | Filter incoming/outgoing updates based on communities |
| 1.3.6.1.4.1.2272.1.8.100.13.1.38 | ColumnrcIpRoutePolicySetExtCommunity | read-create | current | Set Extended-community string. |
| 1.3.6.1.4.1.2272.1.8.100.13.1.39 | ColumnrcIpRoutePolicySetExtCommunityMode | read-create | current | This value can be either additive, unchanged or overwrite. |
| 1.3.6.1.4.1.2272.1.8.100.13.1.40 | ColumnrcIpRoutePolicyMatchLocalPref | read-create | current | Match Local Prefix value. |
| 1.3.6.1.4.1.2272.1.8.100.13.1.41 | ColumnrcIpRoutePolicyMatchIpRouteDest | read-create | current | to match route destination, one can specify one or more prefix list name(s) or id(s) separated by comma. |
| 1.3.6.1.4.1.2272.1.8.100.13.1.42 | ColumnrcIpRoutePolicyMatchExtendedPref | read-create | current | To associate extended ACL(access control list) with the route policy. User can associate one or multiple extended ACLs. |
| 1.3.6.1.4.1.2272.1.8.100.13.1.43 | ColumnrcIpRoutePolicyIpv6SetNextHop | read-create | current | Address of the ipv6 next hop router. Ignored for DVMRP routes. |
| 1.3.6.1.4.1.2272.1.8.100.13.1.44 | ColumnrcIpRoutePolicyMatchMetricTypeIsis | read-write | current | Match metric type field in the incoming ISIS routes in accept policy. |
| 1.3.6.1.4.1.2272.1.8.100.13.1.45 | ColumnrcIpRoutePolicySetMetricTypeIsis | read-write | current | Set Metric type ISIS. |
| 1.3.6.1.4.1.2272.1.8.100.13.1.46 | ColumnrcIpRoutePolicySetMetricTypeBgp | read-write | current | Set Metric type BGP. |
| 1.3.6.1.4.1.2272.1.8.100.14 | ScalarrcIpRedistributeTableSize | read-only | current | table size |
| 1.3.6.1.4.1.2272.1.8.100.15 | ScalarrcIpRedistributeApply | read-write | current | Apply Ip Redistribution |
| 1.3.6.1.4.1.2272.1.8.100.16 | TablercIpRedistributeTable | not-accessible | current | IP Redistribute table |
| 1.3.6.1.4.1.2272.1.8.100.16.1 | RowrcIpRedistributeEntry | not-accessible | current | An entry of Ip Redistribute Table. |
| 1.3.6.1.4.1.2272.1.8.100.16.1.1 | ColumnrcIpRedistributeProtocol | read-only | current | Protocol is any one of the dynamic routing protocol, which is interested in receiving the external routing info. |
| 1.3.6.1.4.1.2272.1.8.100.16.1.2 | ColumnrcIpRedistributeRouteSource | read-only | current | equivalent to the owner field in the routing table. This field indicates that the protocol is interested in knowing/not-knowing the routes learned from this so… |
| 1.3.6.1.4.1.2272.1.8.100.16.1.3 | ColumnrcIpRedistributeEnable | read-write | current | Enable/Disable. By default this is enabled. |
| 1.3.6.1.4.1.2272.1.8.100.16.1.4 | ColumnrcIpRedistributeMetric | read-write | current | value of the metric to be announced in the advertisment. The Range specified is the range for ISIS for other protocols range is (0 .. 65535) |
| 1.3.6.1.4.1.2272.1.8.100.16.1.5 | ColumnrcIpRedistributeMetricType | read-write | current | specifies the type of the metric type, useful for OSPF and BGP only. In case of ISIS type1 is treated as internal and type2 is treated as external |
| 1.3.6.1.4.1.2272.1.8.100.16.1.6 | ColumnrcIpRedistributeMatchRouteType | read-write | current | used to filter a route based on the route type. applicable to BGP. |
| 1.3.6.1.4.1.2272.1.8.100.16.1.7 | ColumnrcIpRedistributeSetTag | read-write | current | Tag value to be set in the advertisment. |
| 1.3.6.1.4.1.2272.1.8.100.16.1.8 | ColumnrcIpRedistributeSubnets | read-write | current | applicable to OSPF only. Indicates that all the subnets need to be advertised individually. |
| 1.3.6.1.4.1.2272.1.8.100.16.1.9 | ColumnrcIpRedistributeRoutePolicy | read-write | current | specify the route policy to achieve the final granularity in filtering to determine whether or not a specific route should be advertised to the given protocol.… |
| 1.3.6.1.4.1.2272.1.8.100.16.1.10 | ColumnrcIpRedistributeASNumber | read-write | current | Autonomous system number. Used only for the BGP protocol. |
| 1.3.6.1.4.1.2272.1.8.100.16.1.11 | ColumnrcIpRedistributeWeight | read-write | current | used only for the BGP protocol. |
| 1.3.6.1.4.1.2272.1.8.100.16.1.12 | ColumnrcIpRedistributeDefaultOriginate | read-write | current | indicates the given protocol will originate/advertise a default route. |
| 1.3.6.1.4.1.2272.1.8.100.16.1.13 | ColumnrcIpRedistributeRowStatus | read-write | current | row status |
| 1.3.6.1.4.1.2272.1.8.100.16.1.14 | ColumnrcIpRedistributeLevel | read-write | current | This is for ISIS only this sets the redistribute level. Set this to level2 to distribute the routes in L2 LSPs if the router is at level1 then setting redistri… |
| 1.3.6.1.4.1.2272.1.8.100.17 | ScalarrcIpOspfInFilterTableSize | read-only | current | table size |
| 1.3.6.1.4.1.2272.1.8.100.18 | ScalarrcIpOspfInFilterApply | read-write | current | Used to Apply Ip Ospf In Filter |
| 1.3.6.1.4.1.2272.1.8.100.19 | TablercIpOspfInFilterTable | not-accessible | current | IP Ospf In Filter table |
| 1.3.6.1.4.1.2272.1.8.100.19.1 | RowrcIpOspfInFilterEntry | not-accessible | current | An entry of Ip Ospf In Filter Table. |
| 1.3.6.1.4.1.2272.1.8.100.19.1.1 | ColumnrcIpOspfInFilterAdvertisingRtr | read-only | current | |
| 1.3.6.1.4.1.2272.1.8.100.19.1.2 | ColumnrcIpOspfInFilterEnable | read-write | current | IfIndex |
| 1.3.6.1.4.1.2272.1.8.100.19.1.3 | ColumnrcIpOspfInFilterMetricType | read-write | current | |
| 1.3.6.1.4.1.2272.1.8.100.19.1.4 | ColumnrcIpOspfInFilterPolicyName | read-write | current | |
| 1.3.6.1.4.1.2272.1.8.100.19.1.5 | ColumnrcIpOspfInFilterRowStatus | read-write | current | |
| 1.3.6.1.4.1.2272.1.8.100.20 | ScalarrcIpRoutePrefTableSize | read-only | current | table size |
| 1.3.6.1.4.1.2272.1.8.100.21 | TablercIpRoutePrefTable | not-accessible | current | IP Route Pref table |
| 1.3.6.1.4.1.2272.1.8.100.21.1 | RowrcIpRoutePrefEntry | not-accessible | current | An entry of Ip Route Pref Table. |
| 1.3.6.1.4.1.2272.1.8.100.21.1.1 | ColumnrcIpRoutePrefProtocol | read-only | current | Protocol |
| 1.3.6.1.4.1.2272.1.8.100.21.1.2 | ColumnrcIpRoutePrefDefault | read-only | current | Shows the default preference value for the given protocol. |
| 1.3.6.1.4.1.2272.1.8.100.21.1.3 | ColumnrcIpRoutePrefConfigured | read-write | current | This value is configurable by the user |
| 1.3.6.1.4.1.2272.1.8.100.22 | TablercIpRedistributeInterVrfTable | not-accessible | current | IP Redistribute table for Inter-VRFs |
| 1.3.6.1.4.1.2272.1.8.100.22.1 | RowrcIpRedistributeInterVrfEntry | not-accessible | current | An entry of Ip Redistribute Table.(new) |
| 1.3.6.1.4.1.2272.1.8.100.22.1.1 | ColumnrcIpRedistributeInterVrfDstVrfId | not-accessible | current | dst VRF id used in the redistribution |
| 1.3.6.1.4.1.2272.1.8.100.22.1.2 | ColumnrcIpRedistributeInterVrfProtocol | not-accessible | current | Protocol is any one of the dynamic routing protocol, which is interested in receiving the external routing info. |
| 1.3.6.1.4.1.2272.1.8.100.22.1.3 | ColumnrcIpRedistributeInterVrfSrcVrfId | not-accessible | current | src VRF id used in the redistribution |
| 1.3.6.1.4.1.2272.1.8.100.22.1.4 | ColumnrcIpRedistributeInterVrfRouteSource | not-accessible | current | equivalent to the owner field in the routing table. This field indicates that the protocol is interested in knowing/not-knowing the routes learned from this so… |
| 1.3.6.1.4.1.2272.1.8.100.22.1.5 | ColumnrcIpRedistributeInterVrfEnable | read-write | current | Enable/Disable. By default this is enabled. |
| 1.3.6.1.4.1.2272.1.8.100.22.1.6 | ColumnrcIpRedistributeInterVrfMetric | read-write | current | value of the metric to be announced in the advertisment |
| 1.3.6.1.4.1.2272.1.8.100.22.1.7 | ColumnrcIpRedistributeInterVrfMetricType | read-write | current | specifies the type of the metric type, useful for OSPF and BGP only. |
| 1.3.6.1.4.1.2272.1.8.100.22.1.8 | ColumnrcIpRedistributeInterVrfMatchRouteType | read-write | current | used to filter a route based on the route type. applicable to BGP. |
| 1.3.6.1.4.1.2272.1.8.100.22.1.9 | ColumnrcIpRedistributeInterVrfSetTag | read-write | current | Tag value to be set in the advertisment. |
| 1.3.6.1.4.1.2272.1.8.100.22.1.10 | ColumnrcIpRedistributeInterVrfSubnets | read-write | current | applicable to OSPF only. Indicates that all the subnets need to be advertised individually. |
| 1.3.6.1.4.1.2272.1.8.100.22.1.11 | ColumnrcIpRedistributeInterVrfRoutePolicy | read-write | current | specify the route policy to achieve the final granularity in filtering to determine whether or not a specific route should be advertised to the given protocol.… |
| 1.3.6.1.4.1.2272.1.8.100.22.1.12 | ColumnrcIpRedistributeInterVrfASNumber | read-write | current | Autonomous system number. Used only for the BGP protocol. |
| 1.3.6.1.4.1.2272.1.8.100.22.1.13 | ColumnrcIpRedistributeInterVrfWeight | read-write | current | used only for the BGP protocol. |
| 1.3.6.1.4.1.2272.1.8.100.22.1.14 | ColumnrcIpRedistributeInterVrfDefaultOriginate | read-write | current | indicates the given protocol will originate/advertise a default route. |
| 1.3.6.1.4.1.2272.1.8.100.22.1.15 | ColumnrcIpRedistributeInterVrfRowStatus | read-write | current | row status |
| 1.3.6.1.4.1.2272.1.8.100.23 | ScalarrcIpExtCommunityAccessListTableSize | read-only | current | IP Extended Community Access List table size. |
| 1.3.6.1.4.1.2272.1.8.100.24 | TablercIpExtCommunityAccessListTable | not-accessible | current | IP Extended Community Access List table. |
| 1.3.6.1.4.1.2272.1.8.100.24.1 | RowrcIpExtCommunityAccessListEntry | not-accessible | current | An entry of Ip Extended Community Access List Table. |
| 1.3.6.1.4.1.2272.1.8.100.24.1.1 | ColumnrcIpExtCommunityAccessListId | not-accessible | current | IP extended Community Access List Id |
| 1.3.6.1.4.1.2272.1.8.100.24.1.2 | ColumnrcIpExtCommunityAccessListMemberId | not-accessible | current | Member Id for the extended-community list to be added |
| 1.3.6.1.4.1.2272.1.8.100.24.1.3 | ColumnrcIpExtCommunityAccessListRTType | read-only | current | The route target Type for IP Extended Community rule in the list |
| 1.3.6.1.4.1.2272.1.8.100.24.1.4 | ColumnrcIpExtCommunityAccessListRTAddress | read-create | current | Extended community Ip address for the route-target type entry. |
| 1.3.6.1.4.1.2272.1.8.100.24.1.5 | ColumnrcIpExtCommunityAccessListRTAsNumber | read-create | current | Extended community Asnumber for the route-target type entry. |
| 1.3.6.1.4.1.2272.1.8.100.24.1.6 | ColumnrcIpExtCommunityAccessListRTAssignedNum | read-create | current | Extended community assigned number for the route-target type entry. |
| 1.3.6.1.4.1.2272.1.8.100.24.1.7 | ColumnrcIpExtCommunityAccessListSooType | read-only | current | The site of origin Type for IP Extended Community Access List |
| 1.3.6.1.4.1.2272.1.8.100.24.1.8 | ColumnrcIpExtCommunityAccessListSooAddress | read-create | current | Extended community Ip address for the site-of-origin type of entry. |
| 1.3.6.1.4.1.2272.1.8.100.24.1.9 | ColumnrcIpExtCommunityAccessListSooAsNumber | read-create | current | Extended community AsNumber for the site-of-origin type of entry. |
| 1.3.6.1.4.1.2272.1.8.100.24.1.10 | ColumnrcIpExtCommunityAccessListSooAssignedNum | read-create | current | Extended community assigned number for the site-of-origin type of entry. |
| 1.3.6.1.4.1.2272.1.8.100.24.1.11 | ColumnrcIpExtCommunityAccessListVrfId | read-create | current | VrfId for the extended-community Access list. |
| 1.3.6.1.4.1.2272.1.8.100.24.1.12 | ColumnrcIpExtCommunityAccessListRowStatus | read-create | current | IP Ext Community Table Row Status. |
| 1.3.6.1.4.1.2272.1.8.100.25 | TablercIpExtACLTable | not-accessible | current | This table contains list of extended ACL (access control list) configuration. The extended ACL is used to filter SA (Source-Active) messages by matching both t… |
| 1.3.6.1.4.1.2272.1.8.100.25.1 | RowrcIpExtACLEntry | not-accessible | current | An entry (conceptual row) representing a prefix of an ACL list. The ACL list is identified by the ACL name. User can add one or multiple prefixes to an ACL lis… |
| 1.3.6.1.4.1.2272.1.8.100.25.1.1 | ColumnrcIpExtACLPrefixSourceAddr | not-accessible | current | This is the source address of the prefix. |
| 1.3.6.1.4.1.2272.1.8.100.25.1.2 | ColumnrcIpExtACLPrefixSourceMask | not-accessible | current | This is the source mask of the prefix. |
| 1.3.6.1.4.1.2272.1.8.100.25.1.3 | ColumnrcIpExtACLPrefixDestinationAddr | not-accessible | current | This is the destination address of the prefix. |
| 1.3.6.1.4.1.2272.1.8.100.25.1.4 | ColumnrcIpExtACLPrefixDestinationMask | not-accessible | current | This is a destination mask of the prefix. |
| 1.3.6.1.4.1.2272.1.8.100.25.1.5 | ColumnrcIpExtACLPrefixName | not-accessible | current | This is the extended ACL list to which the prefixes belongs. An extended ACL list must have one prefix at least. |
| 1.3.6.1.4.1.2272.1.8.100.25.1.6 | ColumnrcIpExtACLPrefixRowStatus | read-create | current | Used to create/delete prefixes from ACL list. |
| 1.3.6.1.4.1.2272.1.8.100.26 | ScalarrcIpPrefixListNameTableSize | read-only | current | table size |
| 1.3.6.1.4.1.2272.1.8.100.27 | TablercIpPrefixListNameTable | not-accessible | current | Prefix List Name table |
| 1.3.6.1.4.1.2272.1.8.100.27.1 | RowrcIpPrefixListNameEntry | not-accessible | current | An entry of Prefix List Name Table. |
| 1.3.6.1.4.1.2272.1.8.100.27.1.1 | ColumnrcIpPrefixListNameId | not-accessible | current | list id |
| 1.3.6.1.4.1.2272.1.8.100.27.1.2 | ColumnrcIpPrefixListNameName | read-only | current | list name |
| 1.3.6.1.4.1.2272.1.8.100.28 | TablercIpRoutePolicyNameTable | not-accessible | current | Route Policy Name table for all VRFs |
| 1.3.6.1.4.1.2272.1.8.100.28.1 | RowrcIpRoutePolicyNameEntry | not-accessible | current | An entry of Route Policy Name Table. |
| 1.3.6.1.4.1.2272.1.8.100.28.1.1 | ColumnrcIpRoutePolicyNameVrfId | not-accessible | current | route policy vrfId |
| 1.3.6.1.4.1.2272.1.8.100.28.1.2 | ColumnrcIpRoutePolicyNameId | not-accessible | current | route policy id |
| 1.3.6.1.4.1.2272.1.8.100.28.1.3 | ColumnrcIpRoutePolicyNameName | read-only | current | route policy name |
| 1.3.6.1.4.1.2272.1.8.100.29 | ScalarrcIpNewRoutePrefTableSize | read-only | current | table size |
| 1.3.6.1.4.1.2272.1.8.100.30 | TablercIpNewRoutePrefTable | not-accessible | current | New IPv4 Route Pref table. This table and rcIpv6RoutePrefTable are designed to obsolete the rcIpRoutePrefTable |
| 1.3.6.1.4.1.2272.1.8.100.30.1 | RowrcIpNewRoutePrefEntry | not-accessible | current | An entry of New Ipv4 Route Pref Table. |
| 1.3.6.1.4.1.2272.1.8.100.30.1.1 | ColumnrcIpNewRoutePrefDefaultValue | not-accessible | current | Shows the default preference value for the given protocol. |
| 1.3.6.1.4.1.2272.1.8.100.30.1.2 | ColumnrcIpNewRoutePrefProtocol | read-only | current | Protocol name |
| 1.3.6.1.4.1.2272.1.8.100.30.1.3 | ColumnrcIpNewRoutePrefConfiguredValue | read-write | current | This value is configurable by the user |
| 1.3.6.1.4.1.2272.1.8.101 | NodercIpBgp | |||
| 1.3.6.1.4.1.2272.1.8.101.1 | NodercIpBgpGeneralGroup | |||
| 1.3.6.1.4.1.2272.1.8.101.1.1 | ScalarrcIpBgpGeneralGroupLocalAs | read-write | current | Local Autonomous system number |
| 1.3.6.1.4.1.2272.1.8.101.1.2 | ScalarrcIpBgpGeneralGroupAdminStatus | read-write | current | Disable or Enable group administrative |
| 1.3.6.1.4.1.2272.1.8.101.1.3 | ScalarrcIpBgpGeneralGroupDefaultMetric | read-write | current | The default-metric is used in conjunction with the redistribute router configuration command to cause the bgp routing protocol to use this metric as MED |
| 1.3.6.1.4.1.2272.1.8.101.1.4 | ScalarrcIpBgpGeneralGroupDefaultLocalPreference | read-write | current | Default local preference attribute value to be used |
| 1.3.6.1.4.1.2272.1.8.101.1.5 | ScalarrcIpBgpGeneralGroupDefaultInformationOriginate | read-write | current | allows the redistribution of network 0.0.0.0 into BGP |
| 1.3.6.1.4.1.2272.1.8.101.1.6 | ScalarrcIpBgpGeneralGroupBestPathMissingAsWorst | read-write | current | Enable to consider a missing MED attribute in a path as having a value of infinity, making the path without a MED value the least desirable path. To return the… |
| 1.3.6.1.4.1.2272.1.8.101.1.7 | ScalarrcIpBgpGeneralGroupBestPathMedConfed | read-write | current | To enable MED comparison among paths learned from confederation peers. Disable to prevent considering the MED attribute in comparing paths |
| 1.3.6.1.4.1.2272.1.8.101.1.8 | ScalarrcIpBgpGeneralGroupIgnoreIllegalRouterId | read-write | current | Configures BGP to overlook an illegal router ID. Enables or disable accepting a connection from a peer that sends its open message with a router ID of 0. |
| 1.3.6.1.4.1.2272.1.8.101.1.9 | ScalarrcIpBgpGeneralGroupAlwaysCompareMed | read-write | current | Enable to allow the comparison of the Multi Exit Discriminator (MED) for paths from neighbors in different autonomous systems. |
| 1.3.6.1.4.1.2272.1.8.101.1.10 | ScalarrcIpBgpGeneralGroupAutoPeerRestart | read-write | current | Enable the feature that automatically restarts the connection to a BGP peer when the connection goes down. |
| 1.3.6.1.4.1.2272.1.8.101.1.11 | ScalarrcIpBgpGeneralGroupAutoSummary | read-write | current | Enable BGP to summarize networks based on class limlts (Class A,B,C networks). |
| 1.3.6.1.4.1.2272.1.8.101.1.12 | ScalarrcIpBgpGeneralGroupSynchronization | read-write | current | Enables and disables the router from accepting routes from BGP peers without waiting for an update from the IBGP. |
| 1.3.6.1.4.1.2272.1.8.101.1.13 | ScalarrcIpBgpGeneralGroupMaxEqualcostRoutes | read-write | current | Sets the number of maximum number of equal-cost routes that can be stored in the routing table. |
| 1.3.6.1.4.1.2272.1.8.101.1.14 | ScalarrcIpBgpGeneralGroupIbgpReportImportRoute | read-write | current | Configure BGP to report imported routes to an interior BGP peer. |
| 1.3.6.1.4.1.2272.1.8.101.1.15 | ScalarrcIpBgpGeneralGroupAggregate | read-write | current | |
| 1.3.6.1.4.1.2272.1.8.101.1.16 | ScalarrcIpBgpGeneralGroupFlapDampEnable | read-write | current | Enabled or Disabled |
| 1.3.6.1.4.1.2272.1.8.101.1.17 | ScalarrcIpBgpGeneralGroupDebugMask | read-write | current | value is one of multiple (logically by 'OR' of following value: none (0), error(1), packet(2), event(4), trace(8), warning(16), state(32), init(64), filter(128… |
| 1.3.6.1.4.1.2272.1.8.101.1.18 | ScalarrcIpBgpGeneralGroupTrapEnable | read-write | current | |
| 1.3.6.1.4.1.2272.1.8.101.1.19 | ScalarrcIpBgpGeneralGroupQuickStart | read-write | current | Enable the flag to avoid flap penalty and trigger the peer start event quickly |
| 1.3.6.1.4.1.2272.1.8.101.1.20 | ScalarrcIpBgpGeneralGroupDeterministicMed | read-write | current | Enable to allow the comparison of the Multi Exit Discriminator (MED) for paths from neighbors in same autonomous system. |
| 1.3.6.1.4.1.2272.1.8.101.1.21 | ScalarrcIpBgpGeneralGroupRouteRefresh | read-write | current | Route Refresh for Bgp. |
| 1.3.6.1.4.1.2272.1.8.101.1.22 | ScalarrcIpBgpGeneralGroupRoutePolicyIn | read-write | current | Route Policy Name that will be applied to all routes which enter the VRF table. |
| 1.3.6.1.4.1.2272.1.8.101.1.23 | ScalarrcIpBgpGeneralGroupRoutePolicyOut | read-write | current | Route policy name that will be applied to all routes which are sent out of this VRF instance. |
| 1.3.6.1.4.1.2272.1.8.101.1.24 | ScalarrcIpBgpGeneralGroupDefaultInformationOriginateIpv6 | read-write | current | allows the redistribution of default ipv6 network into BGP |
| 1.3.6.1.4.1.2272.1.8.101.1.25 | ScalarrcIpBgpGeneralGroupNewLocalAs | read-write | current | Local Autonomous system number |
| 1.3.6.1.4.1.2272.1.8.101.1.26 | ScalarrcIpBgpGeneralGroup4ByteAs | read-write | current | 4 Byte As number enable |
| 1.3.6.1.4.1.2272.1.8.101.1.27 | ScalarrcIpBgpGeneralGroupAsDot | read-write | current | As number in Dot format |
| 1.3.6.1.4.1.2272.1.8.101.1.28 | ScalarrcIpBgpGeneralGroupIdentifier | read-write | current | The BGP Identifier of local system. |
| 1.3.6.1.4.1.2272.1.8.101.2 | ScalarrcIpBgpAggregateTableSize | read-only | deprecated | Size of Aggregate Table |
| 1.3.6.1.4.1.2272.1.8.101.3 | TablercIpBgpAggregateTable | not-accessible | deprecated | To specify the list of aggregate prefixes to be created by the BGP routing process and the options to be used while aggregating. |
| 1.3.6.1.4.1.2272.1.8.101.3.1 | RowrcIpBgpAggregateEntry | not-accessible | current | An entry of rcIpBgp Aggregate Address In Table. |
| 1.3.6.1.4.1.2272.1.8.101.3.1.1 | ColumnrcIpBgpAggregateAddress | read-only | current | Prefix to create an aggregate address in BGP routing table. |
| 1.3.6.1.4.1.2272.1.8.101.3.1.2 | ColumnrcIpBgpAggregateMask | read-only | current | Mask for the aggregrate |
| 1.3.6.1.4.1.2272.1.8.101.3.1.3 | ColumnrcIpBgpAggregateAsSetGenerate | read-write | current | Enable Generates autonomous system set path information. |
| 1.3.6.1.4.1.2272.1.8.101.3.1.4 | ColumnrcIpBgpAggregateSummaryOnly | read-write | current | Filters all more specific routes from updates. |
| 1.3.6.1.4.1.2272.1.8.101.3.1.5 | ColumnrcIpBgpAggregateSuppressPolicy | read-write | current | Name of route policy used to select the routes to be suppressed. |
| 1.3.6.1.4.1.2272.1.8.101.3.1.6 | ColumnrcIpBgpAggregateAdvertisePolicy | read-write | current | Name of route policy used to select the routes to create AS-SET origin communities. |
| 1.3.6.1.4.1.2272.1.8.101.3.1.7 | ColumnrcIpBgpAggregateAttributePolicy | read-write | current | Name of route policy used to set the attribute of the aggregate route. |
| 1.3.6.1.4.1.2272.1.8.101.3.1.8 | ColumnrcIpBgpAggregateRowStatus | read-write | current | Row status for create/delete. |
| 1.3.6.1.4.1.2272.1.8.101.4 | NodercIpBgpConfederationGroup | |||
| 1.3.6.1.4.1.2272.1.8.101.4.1 | ScalarrcIpBgpConfederationIdentifier | read-write | deprecated | Deprecated. Use rcIpBgpConfederationASIdentifier instead. |
| 1.3.6.1.4.1.2272.1.8.101.4.2 | ScalarrcIpBgpConfederationPeers | read-write | current | The string represents ConfederatoinPeers as <length, value>. Maximum size 255,if any, will not be recorded by this object. The length is a 1-octet field contai… |
| 1.3.6.1.4.1.2272.1.8.101.4.3 | ScalarrcIpBgpConfederationASIdentifier | read-write | current | Confederation AS identifier |
| 1.3.6.1.4.1.2272.1.8.101.5 | NodercIpBgpRouteReflectorGroup | |||
| 1.3.6.1.4.1.2272.1.8.101.5.1 | ScalarrcIpBgpRouteReflectionEnable | read-write | current | Enable Route Reflection on this router |
| 1.3.6.1.4.1.2272.1.8.101.5.2 | ScalarrcIpBgpRouteReflectorClusterId | read-write | current | Cluster ID of this router acting as a route reflector |
| 1.3.6.1.4.1.2272.1.8.101.5.3 | ScalarrcIpBgpRouteReflectorClientToClientReflection | read-write | current | When this router is configured as a route reflector, and the clients are fully meshed, a Disable value disables reflection of routes from one client to another. |
| 1.3.6.1.4.1.2272.1.8.101.5.4 | ScalarrcIpBgpRouteReflectionOperState | read-only | current | Displays the current route reflection operational state |
| 1.3.6.1.4.1.2272.1.8.101.6 | ScalarrcIpBgpNetworkTableSize | read-only | deprecated | Network Prefix table size |
| 1.3.6.1.4.1.2272.1.8.101.7 | TablercIpBgpNetworkTable | not-accessible | deprecated | The networks in this table are either static/directly connected or learned routes. Bgp advertises these network provided they are reachable and are in the IP r… |
| 1.3.6.1.4.1.2272.1.8.101.7.1 | RowrcIpBgpNetworkEntry | not-accessible | current | An entry In NetworkTable. |
| 1.3.6.1.4.1.2272.1.8.101.7.1.1 | ColumnrcIpBgpNetworkAddr | read-write | current | Network prefix that BGP will advertise. |
| 1.3.6.1.4.1.2272.1.8.101.7.1.2 | ColumnrcIpBgpNetworkMask | read-only | current | Network mask |
| 1.3.6.1.4.1.2272.1.8.101.7.1.3 | ColumnrcIpBgpNetworkRowStatus | read-write | current | Row status for create/delete. |
| 1.3.6.1.4.1.2272.1.8.101.7.1.4 | ColumnrcIpBgpNetworkMetric | read-write | current | Value of the metric to be used while sending an update for the routes from the network table. Indicates to set the MED value for the routes advertised to ebgp … |
| 1.3.6.1.4.1.2272.1.8.101.8 | ScalarrcIpBgpPeerTableSize | read-only | deprecated | BGP peer table size |
| 1.3.6.1.4.1.2272.1.8.101.9 | TablercIpBgpPeerTable | not-accessible | deprecated | IP BGP Peer table |
| 1.3.6.1.4.1.2272.1.8.101.9.1 | RowrcIpBgpPeerEntry | not-accessible | current | An entry of Ip rcIpBgp Peer Table. |
| 1.3.6.1.4.1.2272.1.8.101.9.1.1 | ColumnrcIpBgpPeerEnable | read-write | current | Enable/Disable: controls whether the peer connection is enabled or disabled |
| 1.3.6.1.4.1.2272.1.8.101.9.1.2 | ColumnrcIpBgpPeerIpAddress | read-only | current | The Ip address of this peer |
| 1.3.6.1.4.1.2272.1.8.101.9.1.3 | ColumnrcIpBgpPeerRemoteAs | read-write | current | Remote Autonomous system number of this peer |
| 1.3.6.1.4.1.2272.1.8.101.9.1.4 | ColumnrcIpBgpPeerGroupName | read-write | current | Peer group name to which this peer belongs (optional) |
| 1.3.6.1.4.1.2272.1.8.101.9.1.5 | ColumnrcIpBgpPeerDefaultOriginate | read-write | current | To allow a BGP speaker (the local router) to send the default route 0.0.0.0 to a neighbor for use as a default route |
| 1.3.6.1.4.1.2272.1.8.101.9.1.6 | ColumnrcIpBgpPeerEbgpMultiHop | read-write | current | To accept and attempt BGP connections to external peers residing on networks that are not directly connected |
| 1.3.6.1.4.1.2272.1.8.101.9.1.7 | ColumnrcIpBgpPeerAdvertisementInterval | read-write | current | To set the minimum interval between the sending of BGP routing updates Time in seconds. Integer from 5 to 120. |
| 1.3.6.1.4.1.2272.1.8.101.9.1.8 | ColumnrcIpBgpPeerPassword | read-write | current | To enable MD5 authentication on a TCP connection between two BGP peers Case-sensitive password of up to 80 character |
| 1.3.6.1.4.1.2272.1.8.101.9.1.9 | ColumnrcIpBgpPeerWeight | read-write | current | To assign an absolute weight to a BGP network. It can be an integer from 0 to 65535. |
| 1.3.6.1.4.1.2272.1.8.101.9.1.10 | ColumnrcIpBgpPeerMaxPrefix | read-write | current | Sets a limit on the number of routes that will be accepted from a neighbor. A value of zero indicates no limit |
| 1.3.6.1.4.1.2272.1.8.101.9.1.11 | ColumnrcIpBgpPeerNextHopSelf | read-write | current | Set NextHop Attribute to local router address before sending updates to remote peer |
| 1.3.6.1.4.1.2272.1.8.101.9.1.12 | ColumnrcIpBgpPeerRoutePolicyIn | read-write | current | Route Policy Name that will be applied to all networks learned from this peer |
| 1.3.6.1.4.1.2272.1.8.101.9.1.13 | ColumnrcIpBgpPeerRoutePolicyOut | read-write | current | Route policy name that will be applied to all outgoing updates |
| 1.3.6.1.4.1.2272.1.8.101.9.1.14 | ColumnrcIpBgpPeerRouteReflectorClient | read-write | current | Indicates whether this peer is a route reflector client. |
| 1.3.6.1.4.1.2272.1.8.101.9.1.15 | ColumnrcIpBgpPeerSoftReconfigurationIn | read-write | current | If Peer soft reconfiguration is enabled in the in-bound direction, policy can be changed and routes can re-learned without having to reset the bgp connection. … |
| 1.3.6.1.4.1.2272.1.8.101.9.1.16 | ColumnrcIpBgpPeerSoftReconfiguration | read-write | current | If rcIpBgpPeerSoftReconfigurationIn is enabled in the in-bound direction, policy can be changed and routes can re-learned without having to reset the bgp conne… |
| 1.3.6.1.4.1.2272.1.8.101.9.1.17 | ColumnrcIpBgpPeerRemovePrivateAs | read-write | current | Enable and disable private AS number from being stripped when sending an update |
| 1.3.6.1.4.1.2272.1.8.101.9.1.18 | ColumnrcIpBgpPeerRowStatus | read-write | current | Used to create/delete entries in the Table. |
| 1.3.6.1.4.1.2272.1.8.101.9.1.19 | ColumnrcIpBgpPeerMD5Authentication | read-write | current | Enable and Disable MD5 authentication |
| 1.3.6.1.4.1.2272.1.8.101.9.1.20 | ColumnrcIpBgpPeerDebugMask | read-write | current | value is one of multiple (logically by 'OR' of following value: none (0), error(1), packet(2), event(4), trace(8), warning(16), state(32), init(64), filter(128… |
| 1.3.6.1.4.1.2272.1.8.101.9.1.21 | ColumnrcIpBgpPeerSendCommunity | read-write | current | |
| 1.3.6.1.4.1.2272.1.8.101.9.1.22 | ColumnrcIpBgpPeerUpdateSourceInterface | read-write | current | The IP address to be used for Circuitless IP. |
| 1.3.6.1.4.1.2272.1.8.101.9.1.23 | ColumnrcIpBgpPeerBgpMplsCutThroughType | read-write | current | Specifies whether the BGP to MPLS cut through being used is an LSP or an LSP group. |
| 1.3.6.1.4.1.2272.1.8.101.9.1.24 | ColumnrcIpBgpPeerBgpMplsCutThroughId | read-write | current | The ID of LSP or LSP group being used for BGP to MPLS cut through. |
| 1.3.6.1.4.1.2272.1.8.101.9.1.25 | ColumnrcIpBgpPeerState | read-only | current | The BGP peer connection state. |
| 1.3.6.1.4.1.2272.1.8.101.9.1.26 | ColumnrcIpBgpPeerLastError | read-only | current | The last error code and subcode seen by this peer on this connection. If no error has occurred, this field is zero. Otherwise, the first byte of this two byte … |
| 1.3.6.1.4.1.2272.1.8.101.9.1.27 | ColumnrcIpBgpPeerVpnv4Address | read-create | current | The vpnv4 routes specified. |
| 1.3.6.1.4.1.2272.1.8.101.9.1.28 | ColumnrcIpBgpPeerIpvpnLiteCap | read-create | current | The IPVPN-lite capability can be enabled or disabled on the bgp neighbor peer. |
| 1.3.6.1.4.1.2272.1.8.101.9.1.29 | ColumnrcIpBgpPeerSooAddress | read-create | current | The site-of-origin ip address. |
| 1.3.6.1.4.1.2272.1.8.101.9.1.30 | ColumnrcIpBgpPeerSooAsNumber | read-create | current | The asnum for the site-of-origin for bgp peer. |
| 1.3.6.1.4.1.2272.1.8.101.9.1.31 | ColumnrcIpBgpPeerSooAssignedNum | read-create | current | The Assigned number required along with asnum or address to configure the site-of-origin for bgp peer. |
| 1.3.6.1.4.1.2272.1.8.101.9.1.32 | ColumnrcIpBgpPeerSooType | read-only | current | The soo type can be asnum or ipaddress. |
| 1.3.6.1.4.1.2272.1.8.101.9.1.33 | ColumnrcIpBgpPeerRouteRefresh | read-create | current | Route refresh for bgp peer. |
| 1.3.6.1.4.1.2272.1.8.101.9.1.34 | ColumnrcIpBgpPeerAsOverride | read-create | current | The AS Override value can be enabled or disabled for bgp peer. |
| 1.3.6.1.4.1.2272.1.8.101.9.1.35 | ColumnrcIpBgpPeerAllowAsIn | read-create | current | The number of as-in allowed for bgp peer |
| 1.3.6.1.4.1.2272.1.8.101.9.1.36 | ColumnrcIpBgpPeerBfdEnable | read-write | current | BFD Admin state flag. |
| 1.3.6.1.4.1.2272.1.8.101.10 | ScalarrcIpBgpPeerGroupTableSize | read-only | current | BGP Peer Group table size |
| 1.3.6.1.4.1.2272.1.8.101.11 | TablercIpBgpPeerGroupTable | not-accessible | current | IP rcIpBgp Peer Group table. This table contains rows which are template configuration parameters which are shared by a group of peers. Peers belonging to the … |
| 1.3.6.1.4.1.2272.1.8.101.11.1 | RowrcIpBgpPeerGroupEntry | not-accessible | current | An entry of Ip rcIpBgp Peer Group Table. |
| 1.3.6.1.4.1.2272.1.8.101.11.1.1 | ColumnrcIpBgpPeerGroupEnable | read-create | current | Allows disabling a group of peers |
| 1.3.6.1.4.1.2272.1.8.101.11.1.2 | ColumnrcIpBgpPeerGroupIndex | read-only | current | Index in to the Peer Group Table |
| 1.3.6.1.4.1.2272.1.8.101.11.1.3 | ColumnrcIpBgpPeerGroupGroupName | read-create | current | Name of the BGP peer group to which this neighbor belong |
| 1.3.6.1.4.1.2272.1.8.101.11.1.4 | ColumnrcIpBgpPeerGroupRemoteAs | read-create | current | Remote Autonomous system number of this peer group (optional) |
| 1.3.6.1.4.1.2272.1.8.101.11.1.5 | ColumnrcIpBgpPeerGroupDefaultOriginate | read-create | current | Enabling this attribute allows a BGP speaker (the local router) to send the default route 0.0.0.0 to the group of neighbors for use as a default route. |
| 1.3.6.1.4.1.2272.1.8.101.11.1.6 | ColumnrcIpBgpPeerGroupEbgpMultiHop | read-create | current | To accept and attempt BGP connections to external peers residing on networks that are not directly connected |
| 1.3.6.1.4.1.2272.1.8.101.11.1.7 | ColumnrcIpBgpPeerGroupAdvertisementInterval | read-create | current | To set the minimum interval between the sending of BGP routing updates Time in seconds. Integer from 1 to 120. |
| 1.3.6.1.4.1.2272.1.8.101.11.1.8 | ColumnrcIpBgpPeerGroupKeepAlive | read-create | current | To set the time interval in seconds between the sending of BGP keep alive messages to remote peers. |
| 1.3.6.1.4.1.2272.1.8.101.11.1.9 | ColumnrcIpBgpPeerGroupHoldTime | read-create | current | To configure the hold time for the group of peers in seconds. Usually set to three times the value of the Keepalive time |
| 1.3.6.1.4.1.2272.1.8.101.11.1.10 | ColumnrcIpBgpPeerGroupWeight | read-create | current | To assign an absolute weight to a BGP network. Absolute weight, or importance. It can be an integer from 0 to 65535. |
| 1.3.6.1.4.1.2272.1.8.101.11.1.11 | ColumnrcIpBgpPeerGroupMaxPrefix | read-create | current | Sets a limit on the number of routes that will be accepted from this group of neighbors. A value of zero indicates no limit |
| 1.3.6.1.4.1.2272.1.8.101.11.1.12 | ColumnrcIpBgpPeerGroupNextHopSelf | read-create | current | Set NextHop Attribute to local router address before sending updates to remote peers |
| 1.3.6.1.4.1.2272.1.8.101.11.1.13 | ColumnrcIpBgpPeerGroupRoutePolicyIn | read-create | current | Route Policy Name that will be applied to all networks learned from this group of peers |
| 1.3.6.1.4.1.2272.1.8.101.11.1.14 | ColumnrcIpBgpPeerGroupRoutePolicyOut | read-create | current | Route policy name that will be applied to all outgoing updates to this group of peers |
| 1.3.6.1.4.1.2272.1.8.101.11.1.15 | ColumnrcIpBgpPeerGroupRouteReflectorClient | read-create | current | Indicates whether this group of peers is a route reflector client. |
| 1.3.6.1.4.1.2272.1.8.101.11.1.16 | ColumnrcIpBgpPeerGroupSoftReconfigurationIn | read-create | current | If Peer soft reconfiguration is enabled in the in bound direction, policy can be changed and routes can re-learned without having to reset the bgp connection. … |
| 1.3.6.1.4.1.2272.1.8.101.11.1.17 | ColumnrcIpBgpPeerGroupSoftReconfiguration | read-write | current | If Peer soft reconfiguration-in is enabled in the in bound direction, policy can be changed and routes can re-learned without having to reset the bgp connectio… |
| 1.3.6.1.4.1.2272.1.8.101.11.1.18 | ColumnrcIpBgpPeerGroupPassword | read-create | current | To enable MD5 authentication on TCP connections between this local speaker and this group of BGP peers. Case-sensitive password of up to 80 character |
| 1.3.6.1.4.1.2272.1.8.101.11.1.19 | ColumnrcIpBgpPeerGroupRemovePrivateAs | read-create | current | Enable and disable private AS number from being stripped when sending an update |
| 1.3.6.1.4.1.2272.1.8.101.11.1.20 | ColumnrcIpBgpPeerGroupRowStatus | read-create | current | row status |
| 1.3.6.1.4.1.2272.1.8.101.11.1.21 | ColumnrcIpBgpPeerGroupMD5Authentication | read-create | current | Enable and Disable MD5 authentication |
| 1.3.6.1.4.1.2272.1.8.101.11.1.22 | ColumnrcIpBgpPeerGroupSendCommunity | read-create | current | Enables or disables sending the update message community attribute to the specified peer. |
| 1.3.6.1.4.1.2272.1.8.101.11.1.23 | ColumnrcIpBgpPeerGroupUpdateSourceInterface | read-create | current | The IP address to used for circuitless IP for this peer group. |
| 1.3.6.1.4.1.2272.1.8.101.11.1.24 | ColumnrcIpBgpPeerGroupVpnv4Address | read-create | current | The vpnv4 routes specified. |
| 1.3.6.1.4.1.2272.1.8.101.11.1.25 | ColumnrcIpBgpPeerGroupIpvpnLiteCap | read-create | current | The IPVPN-lite capability can be enabled or disabled on the bgp neighbor peer group. |
| 1.3.6.1.4.1.2272.1.8.101.11.1.26 | ColumnrcIpBgpPeerGroupSooAddress | read-create | current | The site-of-origin ipaddress. |
| 1.3.6.1.4.1.2272.1.8.101.11.1.27 | ColumnrcIpBgpPeerGroupSooAsNumber | read-create | current | The asnum for site-of-origin for bgp peer group. |
| 1.3.6.1.4.1.2272.1.8.101.11.1.28 | ColumnrcIpBgpPeerGroupSooAssignedNum | read-create | current | The Assigned number required along with asnum or address to configure the site-of-origin for bgp peer group. |
| 1.3.6.1.4.1.2272.1.8.101.11.1.29 | ColumnrcIpBgpPeerGroupSooType | read-only | current | The soo type can be asnum or ipaddress. |
| 1.3.6.1.4.1.2272.1.8.101.11.1.30 | ColumnrcIpBgpPeerGroupRouteRefresh | read-create | current | Route refresh for bgp peer group. |
| 1.3.6.1.4.1.2272.1.8.101.11.1.31 | ColumnrcIpBgpPeerGroupAsOverride | read-create | current | The AS Override value can be enabled or disabled for bgp peer group. |
| 1.3.6.1.4.1.2272.1.8.101.11.1.32 | ColumnrcIpBgpPeerGroupAllowAsIn | read-create | current | The number of as-in allowed for bgp peer group. |
| 1.3.6.1.4.1.2272.1.8.101.11.1.33 | ColumnrcIpBgpPeerGroupDefaultOriginateIpv6 | read-create | current | Enabling this attribute allows a BGP speaker (the local router) to send the default route to the group of neighbors for use as a default route. |
| 1.3.6.1.4.1.2272.1.8.101.11.1.34 | ColumnrcIpBgpPeerGroupAfUpdateSourceInterfaceType | read-create | current | The Inet address type used for circuitless IP for this peer group. |
| 1.3.6.1.4.1.2272.1.8.101.11.1.35 | ColumnrcIpBgpPeerGroupAfUpdateSourceInterface | read-create | current | The Inet address to used for circuitless IP for this peer group. |
| 1.3.6.1.4.1.2272.1.8.101.11.1.36 | ColumnrcIpBgpPeerGroupIpv6Cap | read-create | current | The ipv6 capability can be enabled or disabled on the bgp neighbor peer group. |
| 1.3.6.1.4.1.2272.1.8.101.11.1.37 | ColumnrcIpBgpPeerGroupIpv6RoutePolicyIn | read-create | current | Ipv6 Route Policy Name that will be applied to all networks learned from this group of peers |
| 1.3.6.1.4.1.2272.1.8.101.11.1.38 | ColumnrcIpBgpPeerGroupIpv6RoutePolicyOut | read-create | current | Ipv6 Route policy name that will be applied to all outgoing updates to this group of peers |
| 1.3.6.1.4.1.2272.1.8.101.11.1.39 | ColumnrcIpBgpPeerGroupBfdEnable | read-create | current | Bfd can be enabled or disabled for bgp peer group. |
| 1.3.6.1.4.1.2272.1.8.101.11.1.40 | ColumnrcIpBgpPeerGroupDebugMask | read-write | current | value is one of multiple (logically by 'OR' of following value: none (0), error(1), packet(2), event(4), trace(8), warning(16), state(32), init(64), filter(128… |
| 1.3.6.1.4.1.2272.1.8.101.11.1.41 | ColumnrcIpBgpPeerGroupIpv6MaxPrefix | read-create | current | Sets a limit on the number of IPv6 routes that will be accepted from this group of neighbors. A value of zero indicates no limit |
| 1.3.6.1.4.1.2272.1.8.101.12 | ScalarrcIpBgpRcvdDampenedPathAttrTableSize | read-only | current | table size |
| 1.3.6.1.4.1.2272.1.8.101.13 | TablercIpBgpRcvdDampenedPathAttrTable | not-accessible | current | This table contains info about paths to destination networks received from all BGP-4 peers |
| 1.3.6.1.4.1.2272.1.8.101.13.1 | RowrcIpBgpDampenedPathAttrEntry | not-accessible | current | Information about a path to a networks |
| 1.3.6.1.4.1.2272.1.8.101.13.1.1 | ColumnrcIpBgpPathAttrPeer | read-only | current | The IP address of the peer where the path info was learned |
| 1.3.6.1.4.1.2272.1.8.101.13.1.2 | ColumnrcIpBgpPathAttrIpAddrPrefixLen | read-only | current | Length in bits of the IP address prefix in the network Layer Reachablity Information field. |
| 1.3.6.1.4.1.2272.1.8.101.13.1.3 | ColumnrcIpBgpPathAttrIpAddrPrefix | read-only | current | An Ip address prefix in the NLRI Information field. This object is an IP address containing the prefix with length specified by rcIpBgpPathAttrIpAddrPrefixLen … |
| 1.3.6.1.4.1.2272.1.8.101.13.1.4 | ColumnrcIpBgpPathAttrFlapPenalty | read-only | current | Penalty value based on number of route flaps |
| 1.3.6.1.4.1.2272.1.8.101.13.1.5 | ColumnrcIpBgpPathAttrFlapCount | read-only | current | Number of times a route flapped since the last time the penalty was reset to zero |
| 1.3.6.1.4.1.2272.1.8.101.13.1.6 | ColumnrcIpBgpPathAttrRouteDampened | read-only | current | Shows whether this route is currently suppressed from being announced |
| 1.3.6.1.4.1.2272.1.8.101.13.1.7 | ColumnrcIpBgpPathAttrReuseTime | read-only | current | Re use time is the system configured time for route reuse |
| 1.3.6.1.4.1.2272.1.8.101.13.1.8 | ColumnrcIpBgpPathAttrReuseTimeRemain | read-only | current | Re use time Remain is the number of seconds before the route will be reused |
| 1.3.6.1.4.1.2272.1.8.101.14 | ScalarrcIpBgp4PathAttrTableSize | read-only | current | table size |
| 1.3.6.1.4.1.2272.1.8.101.15 | TablercIpBgp4PathAttrTable | not-accessible | current | This table contains info about paths to destination networks received from all BGP-4 peers |
| 1.3.6.1.4.1.2272.1.8.101.15.1 | RowrcIpBgp4PathAttrEntry | not-accessible | current | |
| 1.3.6.1.4.1.2272.1.8.101.15.1.1 | ColumnrcIpBgp4PathAttrPeer | read-only | current | The IP address of the peer where the path info was learned |
| 1.3.6.1.4.1.2272.1.8.101.15.1.2 | ColumnrcIpBgp4PathAttrIpAddrPrefixLen | read-only | current | Length in bits of the IP address prefix in the network Layer Reachablity Information field. |
| 1.3.6.1.4.1.2272.1.8.101.15.1.3 | ColumnrcIpBgp4PathAttrIpAddrPrefix | read-only | current | An Ip address prefix in the NLRI Information field. This object is an IP address containing the prefix with length specified by rcIpBgpPathAttrIpAddrPrefixLen … |
| 1.3.6.1.4.1.2272.1.8.101.15.1.4 | ColumnrcIpBgp4PathAttrCommunities | read-only | current | The string represents community path attributes as <length,value> The length is a 1-octet field containing the numbner of community numbers in the value field.… |
| 1.3.6.1.4.1.2272.1.8.101.15.1.5 | ColumnrcIpBgp4PathAttrOriginateId | read-only | current | The IP address of the route who originates the routes |
| 1.3.6.1.4.1.2272.1.8.101.15.1.6 | ColumnrcIpBgp4PathAttrClusterId | read-only | current | The string represents Cluster Id path attributes as <length,value> The length is a 1-octet field containing the number of Cluster Id numbers in the value field… |
| 1.3.6.1.4.1.2272.1.8.101.16 | NodercIpBgpExt | |||
| 1.3.6.1.4.1.2272.1.8.101.16.1 | ScalarrcIpBgpExtAggregateAfTableSize | read-only | current | Size of address family independent bgp aggregate table |
| 1.3.6.1.4.1.2272.1.8.101.16.2 | TablercIpBgpExtAggregateAfTable | not-accessible | current | Replaces rcIpBgpAggregateTable. To specify the list of ipv4 and ipv6 aggregate prefixes to be created by the BGP routing process and the options to be used whi… |
| 1.3.6.1.4.1.2272.1.8.101.16.2.1 | RowrcIpBgpExtAggregateAfEntry | not-accessible | current | An entry of v4/v6 aggregate prefix to be created by BGP routing process and the options to be used while aggregating. |
| 1.3.6.1.4.1.2272.1.8.101.16.2.1.1 | ColumnrcIpBgpExtAggregateAfAddressType | not-accessible | current | Inet Address Type of aggregate address. |
| 1.3.6.1.4.1.2272.1.8.101.16.2.1.2 | ColumnrcIpBgpExtAggregateAfAddress | not-accessible | current | V4 or V6 Prefix to create an aggregate address in BGP routing table. |
| 1.3.6.1.4.1.2272.1.8.101.16.2.1.3 | ColumnrcIpBgpExtAggregateAfPrefixLen | not-accessible | current | Prefix length of the aggregate inet address |
| 1.3.6.1.4.1.2272.1.8.101.16.2.1.4 | ColumnrcIpBgpExtAggregateAfAsSetGenerate | read-create | current | Enable Generates autonomous system set path information. |
| 1.3.6.1.4.1.2272.1.8.101.16.2.1.5 | ColumnrcIpBgpExtAggregateAfSummaryOnly | read-create | current | Filters all more specific routes from updates. |
| 1.3.6.1.4.1.2272.1.8.101.16.2.1.6 | ColumnrcIpBgpExtAggregateAfSuppressPolicy | read-create | current | Name of route policy used to select the routes to be suppressed. |
| 1.3.6.1.4.1.2272.1.8.101.16.2.1.7 | ColumnrcIpBgpExtAggregateAfAdvertisePolicy | read-create | current | Name of route policy used to select the routes to create AS-SET origin communities. |
| 1.3.6.1.4.1.2272.1.8.101.16.2.1.8 | ColumnrcIpBgpExtAggregateAfAttributePolicy | read-create | current | Name of route policy used to set the attribute of the aggregate route. |
| 1.3.6.1.4.1.2272.1.8.101.16.2.1.9 | ColumnrcIpBgpExtAggregateAfRowStatus | read-create | current | Row status for create/delete. |
| 1.3.6.1.4.1.2272.1.8.101.16.3 | ScalarrcIpBgpExtNetworkAfTableSize | read-only | current | Address family independent bgp Network Prefix table size |
| 1.3.6.1.4.1.2272.1.8.101.16.4 | TablercIpBgpExtNetworkAfTable | not-accessible | current | This table replaces rcIpBgpNetworkTable. This table supports V4 and V6 BGP networks. The networks in this table are either static/directly connected or learned… |
| 1.3.6.1.4.1.2272.1.8.101.16.4.1 | RowrcIpBgpExtNetworkAfEntry | not-accessible | current | An entry in bgp NetworkTable. |
| 1.3.6.1.4.1.2272.1.8.101.16.4.1.1 | ColumnrcIpBgpExtNetworkAfAddrType | not-accessible | current | Inet address type of the Network prefix that BGP will advertise. |
| 1.3.6.1.4.1.2272.1.8.101.16.4.1.2 | ColumnrcIpBgpExtNetworkAfAddr | not-accessible | current | v4/v6 Network prefix that BGP will advertise. |
| 1.3.6.1.4.1.2272.1.8.101.16.4.1.3 | ColumnrcIpBgpExtNetworkAfPrefixLen | not-accessible | current | Prefix length of the v4/v6 bgp network address |
| 1.3.6.1.4.1.2272.1.8.101.16.4.1.4 | ColumnrcIpBgpExtNetworkAfMetric | read-create | current | Value of the metric to be used while sending an update for the routes from the network table. Indicates to set the MED value for the routes advertised to ebgp … |
| 1.3.6.1.4.1.2272.1.8.101.16.4.1.5 | ColumnrcIpBgpExtNetworkAfRowStatus | read-create | current | Row status for create/delete. |
| 1.3.6.1.4.1.2272.1.8.101.16.5 | ScalarrcIpBgpExtPeerAfTableSize | read-only | current | Size of Address family independent BGP Peer Table |
| 1.3.6.1.4.1.2272.1.8.101.16.6 | TablercIpBgpExtPeerAfTable | not-accessible | current | Extension to the BGP peer table. This table contains, one entry per BGP peer, information about the connections with BGP Peers, which is not supported by the s… |
| 1.3.6.1.4.1.2272.1.8.101.16.6.1 | RowrcIpBgpExtPeerAfEntry | not-accessible | current | Entry containing miscelleneous information (info not present in the standard BGP peer table) about the connection with a remote BGP peer . |
| 1.3.6.1.4.1.2272.1.8.101.16.6.1.1 | ColumnrcIpBgpExtPeerAfGroupName | read-create | current | Peer group name to which this peer belongs (optional) |
| 1.3.6.1.4.1.2272.1.8.101.16.6.1.2 | ColumnrcIpBgpExtPeerAfDefaultOriginate | read-create | current | To allow a BGP speaker (the local router) to send the default route 0.0.0.0 to a neighbor for use as a default route |
| 1.3.6.1.4.1.2272.1.8.101.16.6.1.3 | ColumnrcIpBgpExtPeerAfDefaultOriginateIpv6 | read-create | current | To allow a BGP speaker (the local router) to Send the default ipv6 route to a neighbor for use as a default route |
| 1.3.6.1.4.1.2272.1.8.101.16.6.1.4 | ColumnrcIpBgpExtPeerAfEbgpMultiHop | read-create | current | To accept and attempt BGP connections to external peers residing on networks that are not directly connected |
| 1.3.6.1.4.1.2272.1.8.101.16.6.1.5 | ColumnrcIpBgpExtPeerAfAdvertisementInterval | read-create | current | To set the minimum interval between the sending Of BGP routing updates Time in seconds. Integer from 5 to 120. |
| 1.3.6.1.4.1.2272.1.8.101.16.6.1.6 | ColumnrcIpBgpExtPeerAfPassword | read-create | current | To enable MD5 authentication on a TCP connection between two BGP Peers Case-sensitive password of up to 80 character |
| 1.3.6.1.4.1.2272.1.8.101.16.6.1.7 | ColumnrcIpBgpExtPeerAfWeight | read-create | current | To assign an absolute weight to a BGP network. It can be an integer from 0 to 65535. |
| 1.3.6.1.4.1.2272.1.8.101.16.6.1.8 | ColumnrcIpBgpExtPeerAfMaxPrefix | read-create | current | Sets a limit on the number of routes that will be accepted from a neighbor. A value of zero indicates no limit |
| 1.3.6.1.4.1.2272.1.8.101.16.6.1.9 | ColumnrcIpBgpExtPeerAfNextHopSelf | read-create | current | Set NextHop Attribute to local router address Before sending updates to remote peer |
| 1.3.6.1.4.1.2272.1.8.101.16.6.1.10 | ColumnrcIpBgpExtPeerAfRoutePolicyIn | read-create | current | Route Policy Name that will be applied to all Networks learned from this peer |
| 1.3.6.1.4.1.2272.1.8.101.16.6.1.11 | ColumnrcIpBgpExtPeerAfRoutePolicyOut | read-create | current | Route policy name that will be applied to all outgoing updates |
| 1.3.6.1.4.1.2272.1.8.101.16.6.1.12 | ColumnrcIpBgpExtPeerAfRouteReflectorClient | read-create | current | Indicates whether this peer is a route reflector client. |
| 1.3.6.1.4.1.2272.1.8.101.16.6.1.13 | ColumnrcIpBgpExtPeerAfSoftReconfigurationIn | read-create | current | If Peer soft reconfiguration is enabled in the in-bound direction, policy can be changed and routes can re-learned without having to reset the bgp connection. … |
| 1.3.6.1.4.1.2272.1.8.101.16.6.1.14 | ColumnrcIpBgpExtPeerAfSoftReconfiguration | read-create | current | If rcIpBgpExtPeerAfSoftReconfigurationIn is enabled in the in-bound direction, policy can be changed and routes can re-learned without having to reset the bgp … |
| 1.3.6.1.4.1.2272.1.8.101.16.6.1.15 | ColumnrcIpBgpExtPeerAfRemovePrivateAs | read-create | current | Enable and disable private AS number from being stripped when sending an update |
| 1.3.6.1.4.1.2272.1.8.101.16.6.1.16 | ColumnrcIpBgpExtPeerAfMD5Authentication | read-create | current | Enable and Disable MD5 authentication |
| 1.3.6.1.4.1.2272.1.8.101.16.6.1.17 | ColumnrcIpBgpExtPeerAfDebugMask | read-create | current | value is one of multiple (logically by 'OR' of following value: none (0), error(1), packet(2), event(4), trace(8), warning(16), state(32), init(64), filter(128… |
| 1.3.6.1.4.1.2272.1.8.101.16.6.1.18 | ColumnrcIpBgpExtPeerAfSendCommunity | read-create | current | Enables or disables sending the update message community attribute to the specified peer. |
| 1.3.6.1.4.1.2272.1.8.101.16.6.1.19 | ColumnrcIpBgpExtPeerAfUpdateSourceInterface | read-create | current | The Inet address to be used for Circuitless IP. |
| 1.3.6.1.4.1.2272.1.8.101.16.6.1.20 | ColumnrcIpBgpExtPeerAfVpnv4Address | read-create | current | The vpnv4 routes specified. |
| 1.3.6.1.4.1.2272.1.8.101.16.6.1.21 | ColumnrcIpBgpExtPeerAfIpv6Cap | read-create | current | The ipv6 capability can be enabled or disabled on the bgp neighbor peer. |
| 1.3.6.1.4.1.2272.1.8.101.16.6.1.22 | ColumnrcIpBgpExtPeerAfIpvpnLiteCap | read-create | current | The IPVPN-lite capability can be enabled or disabled on the bgp neighbor peer. |
| 1.3.6.1.4.1.2272.1.8.101.16.6.1.23 | ColumnrcIpBgpExtPeerAfSooAddress | read-create | current | The site-of-origin ip address. |
| 1.3.6.1.4.1.2272.1.8.101.16.6.1.24 | ColumnrcIpBgpExtPeerAfSooAsNumber | read-create | current | The asnum for the site-of-origin for bgp peer. |
| 1.3.6.1.4.1.2272.1.8.101.16.6.1.25 | ColumnrcIpBgpExtPeerAfSooAssignedNum | read-create | current | The Assigned number required along with asnum or address to configure the site-of-origin for bgp peer. |
| 1.3.6.1.4.1.2272.1.8.101.16.6.1.26 | ColumnrcIpBgpExtPeerAfSooType | read-only | current | The soo type can be asnum or ipaddress. |
| 1.3.6.1.4.1.2272.1.8.101.16.6.1.27 | ColumnrcIpBgpExtPeerAfRouteRefresh | read-create | current | Route refresh for bgp peer. |
| 1.3.6.1.4.1.2272.1.8.101.16.6.1.28 | ColumnrcIpBgpExtPeerAfAsOverride | read-create | current | The AS Override value can be enabled or disabled for bgp peer. |
| 1.3.6.1.4.1.2272.1.8.101.16.6.1.29 | ColumnrcIpBgpExtPeerAfAllowAsIn | read-create | current | The number of as-in allowed for bgp peer. |
| 1.3.6.1.4.1.2272.1.8.101.16.6.1.30 | ColumnrcIpBgpExtPeerAfIpv6RoutePolicyIn | read-create | current | Ipv6 Route Policy Name that will be applied to all Networks learned from this peer |
| 1.3.6.1.4.1.2272.1.8.101.16.6.1.31 | ColumnrcIpBgpExtPeerAfIpv6RoutePolicyOut | read-create | current | Ipv6 Route policy name that will be applied to all outgoing updates |
| 1.3.6.1.4.1.2272.1.8.101.16.6.1.32 | ColumnrcIpBgpExtPeerAfEnable | read-create | current | Used to enable/disable bgp+ peer |
| 1.3.6.1.4.1.2272.1.8.101.16.6.1.33 | ColumnrcIpBgpExtPeerAfRemoteAs | read-create | current | Used to manually configure the remote as of the bgp+ peer. |
| 1.3.6.1.4.1.2272.1.8.101.16.6.1.34 | ColumnrcIpBgpExtPeerAfConnectRetryInterval | read-create | current | Used to configure the ConnectRetry timer for the BGP+ peer. |
| 1.3.6.1.4.1.2272.1.8.101.16.6.1.35 | ColumnrcIpBgpExtPeerAfHoldTimeConfigured | read-create | current | Used to configure the Hold Timer for the BGP+ peer. |
| 1.3.6.1.4.1.2272.1.8.101.16.6.1.36 | ColumnrcIpBgpExtPeerAfKeepAliveConfigured | read-create | current | Used to configure the KeepAlive Timer for the BGP+ peer. |
| 1.3.6.1.4.1.2272.1.8.101.16.6.1.37 | ColumnrcIpBgpExtPeerAfRowStatus | read-create | current | Used to create/delete entries in the Table. |
| 1.3.6.1.4.1.2272.1.8.101.16.6.1.38 | ColumnrcIpBgpExtPeerAfNewRemoteAs | read-create | current | Remote Autonomous system number of this peer |
| 1.3.6.1.4.1.2272.1.8.101.16.6.1.39 | ColumnrcIpBgpExtPeerAfBfdEnable | read-create | current | BFD Admin state flag. |
| 1.3.6.1.4.1.2272.1.8.101.16.6.1.40 | ColumnrcIpBgpExtPeerAfIpv6MaxPrefix | read-create | current | Sets a limit on the number of ipv6 routes that will be accepted from a neighbor. A value of zero indicates no limit |
| 1.3.6.1.4.1.2272.1.8.101.16.7 | TablercIpBgpExtAfPathAttrTable | not-accessible | current | Extension to rcIpBgpTmpAfPathAttrTable. This table contains info about additional BGP path attributes not covered in rcIpBgpTmpAfPathAttrTable. |
| 1.3.6.1.4.1.2272.1.8.101.16.7.1 | RowrcIpBgpExtAfPathAttrEntry | not-accessible | current | Each entry contains data about additional path attributes associated with a given prefix in the rcIpBgpTmpNlriTable. |
| 1.3.6.1.4.1.2272.1.8.101.16.7.1.1 | ColumnrcIpBgpExtAfPathAttrUnknown | read-only | current | Replaces bgp4PathAttrUnknown. One or more path attributes not understood by this BGP4 speaker. Size zero (0) indicates the absence of such attribute(s). Octets… |
| 1.3.6.1.4.1.2272.1.8.101.16.7.1.2 | ColumnrcIpBgpExtAfPathAttrCommunities | read-only | current | The string represents BGP+ community path attributes as <length ,value>. The length is a 1-octet field containing the numbner of community numbers in the value… |
| 1.3.6.1.4.1.2272.1.8.101.16.7.1.3 | ColumnrcIpBgpExtAfPathAttrOriginateId | read-only | current | In a BGP+ context, the IP address of the router which originates the routes. |
| 1.3.6.1.4.1.2272.1.8.101.16.7.1.4 | ColumnrcIpBgpExtAfPathAttrClusterId | read-only | current | The string represents BGP+ Cluster Id path attributes as <length,value>. The length is a 1-octet field containing the number of Cluster Id numbers in the value… |
| 1.3.6.1.4.1.2272.1.8.101.17 | NodercIpBgpTmp | |||
| 1.3.6.1.4.1.2272.1.8.101.17.0 | NodercIpBgpTmpNotification | |||
| 1.3.6.1.4.1.2272.1.8.101.17.0.1 | NotificationrcIpBgpTmpEstablishedNotification | deprecated | The rcIpBgpTmpEstablishedNotification event is generated when the BGP FSM enters the established state. This Notification replaces the bgpEstablished Notificat… | |
| 1.3.6.1.4.1.2272.1.8.101.17.0.2 | NotificationrcIpBgpTmpBackwardTransNotification | deprecated | The rcIpBgpBackwardTransNotification event is generated when the BGP FSM moves from a higher numbered state to a lower numbered state. This Notification replac… | |
| 1.3.6.1.4.1.2272.1.8.101.17.0.3 | NotificationrcIpBgpTmpAfEstablishedNotification | current | The BGP Established event is generated when the BGP FSM enters the established state. | |
| 1.3.6.1.4.1.2272.1.8.101.17.0.4 | NotificationrcIpBgpTmpAfBackwardTransitionNotification | current | The BGPBackwardTransition Event is generated when the BGP FSM moves from a higher numbered state to a lower numbered state. Due to the nature of the BGP state … | |
| 1.3.6.1.4.1.2272.1.8.101.17.9 | ScalarrcIpBgpTmpLocalAsNew | read-only | current | The local autonomous system number. This object supports 4 byte ASes and replaces bgpLocalAs. |
| 1.3.6.1.4.1.2272.1.8.101.17.10 | NodercIpBgpTmpPeerAf | |||
| 1.3.6.1.4.1.2272.1.8.101.17.10.1 | TablercIpBgpTmpPeerAfTable | not-accessible | current | BGP peer table. This table contains, one entry per BGP peer, information about the connections with BGP peers. This table replaces bgpPeerTable. |
| 1.3.6.1.4.1.2272.1.8.101.17.10.1.1 | RowrcIpBgpTmpPeerAfEntry | not-accessible | current | Entry containing information about the connection with a remote BGP peer. |
| 1.3.6.1.4.1.2272.1.8.101.17.10.1.1.1 | ColumnrcIpBgpTmpPeerAfInstance | not-accessible | current | The routing instance index. Some BGP implementations permit the creation of multiple instances of a BGP routing process. An example includes routers running BG… |
| 1.3.6.1.4.1.2272.1.8.101.17.10.1.1.2 | ColumnrcIpBgpTmpPeerAfLocalAddrType | not-accessible | current | The address family of the local end of the peering session. |
| 1.3.6.1.4.1.2272.1.8.101.17.10.1.1.3 | ColumnrcIpBgpTmpPeerAfLocalAddr | not-accessible | current | The local IP address of this entry's BGP connection. |
| 1.3.6.1.4.1.2272.1.8.101.17.10.1.1.4 | ColumnrcIpBgpTmpPeerAfRemoteAddrType | not-accessible | current | The address family of the remote end of the peering session. |
| 1.3.6.1.4.1.2272.1.8.101.17.10.1.1.5 | ColumnrcIpBgpTmpPeerAfRemoteAddr | not-accessible | current | The remote IP address of this entry's BGP peer. |
| 1.3.6.1.4.1.2272.1.8.101.17.10.1.1.6 | ColumnrcIpBgpTmpPeerAfLocalPort | read-only | current | The local port for the TCP connection between the BGP peers. |
| 1.3.6.1.4.1.2272.1.8.101.17.10.1.1.7 | ColumnrcIpBgpTmpPeerAfLocalAs | read-only | current | Some implementations of BGP can represent themselves as multiple ASes. This is the AS that this peering session is representing itself as to the remote peer. |
| 1.3.6.1.4.1.2272.1.8.101.17.10.1.1.8 | ColumnrcIpBgpTmpPeerAfRemotePort | read-only | current | The remote port for the TCP connection between the BGP peers. Note that the objects rcIpBgpTmpPeerAfLocalAddr, rcIpBgpTmpPeerAfLocalPort, rcIpBgpTmpPeerAfRemot… |
| 1.3.6.1.4.1.2272.1.8.101.17.10.1.1.9 | ColumnrcIpBgpTmpPeerAfRemoteAs | read-only | current | The remote autonomous system number received in the BGP OPEN message. |
| 1.3.6.1.4.1.2272.1.8.101.17.10.1.1.10 | ColumnrcIpBgpTmpPeerAfIdentifier | read-only | current | The BGP Identifier of this entry's remote BGP peer. This entry should be 0.0.0.0 unless the rcIpBgpTmpPeerAfPeerState is in the openconfirm or the established … |
| 1.3.6.1.4.1.2272.1.8.101.17.10.1.1.11 | ColumnrcIpBgpTmpPeerAfAdminStatus | read-only | current | Whether or not the BGP FSM for this remote peer is halted or running. The BGP FSM for a remote peer is halted after processing a Stop event. Likewise, it is in… |
| 1.3.6.1.4.1.2272.1.8.101.17.10.1.1.12 | ColumnrcIpBgpTmpPeerAfPeerState | read-only | current | The BGP peer connection state. |
| 1.3.6.1.4.1.2272.1.8.101.17.10.1.1.13 | ColumnrcIpBgpTmpPeerAfConfiguredVersion | read-only | current | The configured version to originally start with this remote peer. The BGP speaker may permit negotiation to a lower version number of the protocol. |
| 1.3.6.1.4.1.2272.1.8.101.17.10.1.1.14 | ColumnrcIpBgpTmpPeerAfNegotiatedVersion | read-only | current | The negotiated version of BGP running between the two peers. This entry MUST be zero (0) unless the rcIpBgpTmpPeerAfState is in the openconfirm or the establis… |
| 1.3.6.1.4.1.2272.1.8.101.17.10.2 | NodercIpBgpTmpPeerAfErrors | |||
| 1.3.6.1.4.1.2272.1.8.101.17.10.2.1 | TablercIpBgpTmpPeerAfErrorsTable | not-accessible | current | On a per-peer basis, this table reflects the last protocol-defined error encountered and reported on the peer session. If no entry for a given peer exists in t… |
| 1.3.6.1.4.1.2272.1.8.101.17.10.2.1.1 | RowrcIpBgpTmpPeerAfErrorsEntry | not-accessible | current | Each entry contains information about errors sent and received for a particular BGP peer. |
| 1.3.6.1.4.1.2272.1.8.101.17.10.2.1.1.1 | ColumnrcIpBgpTmpPeerAfLastErrorCodeReceived | read-only | current | The last error code received from this peer via NOTIFICATION message on this connection. If no error has occurred, this field is zero. |
| 1.3.6.1.4.1.2272.1.8.101.17.10.2.1.1.2 | ColumnrcIpBgpTmpPeerAfLastErrorSubCodeReceived | read-only | current | The last subcode received from this peer via NOTIFICATION message on this connection. If no error has occurred, this field is zero. |
| 1.3.6.1.4.1.2272.1.8.101.17.10.2.1.1.3 | ColumnrcIpBgpTmpPeerAfLastErrorReceivedTime | read-only | current | The timestamp that the last NOTIFICATION was received from this peer. |
| 1.3.6.1.4.1.2272.1.8.101.17.10.2.1.1.4 | ColumnrcIpBgpTmpPeerAfLastErrorReceivedText | read-only | current | This object contains an implementation specific explanation of the error that was reported. |
| 1.3.6.1.4.1.2272.1.8.101.17.10.2.1.1.5 | ColumnrcIpBgpTmpPeerAfLastErrorReceivedData | read-only | current | The last error code's data seen by this peer. Per RFC 2578, some implementations may have limitations dealing with OCTET STRINGS larger than 255. Thus, this da… |
| 1.3.6.1.4.1.2272.1.8.101.17.10.2.1.1.6 | ColumnrcIpBgpTmpPeerAfLastErrorCodeSent | read-only | current | The last error code sent to this peer via NOTIFICATION message on this connection. If no error has occurred, this field is zero. |
| 1.3.6.1.4.1.2272.1.8.101.17.10.2.1.1.7 | ColumnrcIpBgpTmpPeerAfLastErrorSubCodeSent | read-only | current | The last subcode sent to this peer via NOTIFICATION message on this connection. If no error has occurred, this field is zero. |
| 1.3.6.1.4.1.2272.1.8.101.17.10.2.1.1.8 | ColumnrcIpBgpTmpPeerAfLastErrorSentTime | read-only | current | The timestamp that the last NOTIFICATION was sent to this peer. |
| 1.3.6.1.4.1.2272.1.8.101.17.10.2.1.1.9 | ColumnrcIpBgpTmpPeerAfLastErrorSentText | read-only | current | This object contains an implementation specific explanation of the error that is being reported. |
| 1.3.6.1.4.1.2272.1.8.101.17.10.2.1.1.10 | ColumnrcIpBgpTmpPeerAfLastErrorSentData | read-only | current | The last error code's data sent to this peer. Per RFC 2578, some implementations may have limitations dealing with OCTET STRINGS larger than 255. Thus, this da… |
| 1.3.6.1.4.1.2272.1.8.101.17.10.3 | NodercIpBgpTmpPeerAfTimers | |||
| 1.3.6.1.4.1.2272.1.8.101.17.10.3.1 | TablercIpBgpTmpPeerAfEventTimesTable | not-accessible | current | A table reporting the per-peering session amount of time elapsed and update events since the peering session advanced into the established state. |
| 1.3.6.1.4.1.2272.1.8.101.17.10.3.1.1 | RowrcIpBgpTmpPeerAfEventTimesEntry | not-accessible | current | Each row contains a set of statistics about time spent and events encountered in the peer session established state. |
| 1.3.6.1.4.1.2272.1.8.101.17.10.3.1.1.1 | ColumnrcIpBgpTmpPeerAfFsmEstablishedTime | read-only | current | This timer indicates how long (in seconds) this peer has been in the established state or how long since this peer was last in the established state. It is set… |
| 1.3.6.1.4.1.2272.1.8.101.17.10.3.1.1.2 | ColumnrcIpBgpTmpPeerAfInUpdatesElapsedTime | read-only | current | Elapsed time (in seconds) since the last BGP UPDATE message was received from the peer. Each time bgpPeerInUpdates is incremented, the value of this object is … |
| 1.3.6.1.4.1.2272.1.8.101.17.10.3.2 | TablercIpBgpTmpPeerAfConfiguredTimersTable | not-accessible | current | Per peer management data on BGP session timers. |
| 1.3.6.1.4.1.2272.1.8.101.17.10.3.2.1 | RowrcIpBgpTmpPeerAfConfiguredTimersEntry | not-accessible | current | Each entry corresponds to the current state of BGP timers on a given peering session. |
| 1.3.6.1.4.1.2272.1.8.101.17.10.3.2.1.1 | ColumnrcIpBgpTmpPeerAfConnectRetryInterval | read-only | current | Time interval (in seconds) for the ConnectRetry timer. The suggested value for this timer is 120 seconds. |
| 1.3.6.1.4.1.2272.1.8.101.17.10.3.2.1.2 | ColumnrcIpBgpTmpPeerAfHoldTimeConfigured | read-only | current | Time interval (in seconds) for the Hold Timer established with the peer. The value of this object is calculated by this BGP speaker, using the smaller of the v… |
| 1.3.6.1.4.1.2272.1.8.101.17.10.3.2.1.3 | ColumnrcIpBgpTmpPeerAfKeepAliveConfigured | read-only | current | Time interval (in seconds) for the KeepAlive timer configured for this BGP speaker with this peer. The value of this object will only determine the KEEPALIVE m… |
| 1.3.6.1.4.1.2272.1.8.101.17.10.3.2.1.4 | ColumnrcIpBgpTmpPeerAfMinASOrigInterval | read-only | current | Time interval (in seconds) for the MinASOriginationInterval timer. The suggested value for this timer is 15 seconds. |
| 1.3.6.1.4.1.2272.1.8.101.17.10.3.2.1.5 | ColumnrcIpBgpTmpPeerAfMinRouteAdverInterval | read-only | current | Time interval (in seconds) for the MinRouteAdvertisementInterval timer. The suggested value for this timer is 30 seconds for EBGP connections and 5 seconds for… |
| 1.3.6.1.4.1.2272.1.8.101.17.10.3.3 | TablercIpBgpTmpPeerAfNegotiatedTimersTable | not-accessible | current | Configured values of per-peer timers are seen in the rcIpBgpTmpPeerAfConfiguredTimersTable. Values in this table reflect the current operational values, after … |
| 1.3.6.1.4.1.2272.1.8.101.17.10.3.3.1 | RowrcIpBgpTmpPeerAfNegotiatedTimersEntry | not-accessible | current | Each entry reflects a value of the currently operational, negotiated timer as reflected in the rcIpBgpTmpPeerAfNegotiatedTimersEntry. |
| 1.3.6.1.4.1.2272.1.8.101.17.10.3.3.1.1 | ColumnrcIpBgpTmpPeerAfHoldTime | read-only | current | The value of this object is calculated by this BGP Speaker as being; zero (0) - if this was the value sent by the peer and this value is permitted by this BGP … |
| 1.3.6.1.4.1.2272.1.8.101.17.10.3.3.1.2 | ColumnrcIpBgpTmpPeerAfKeepAlive | read-only | current | Time interval in seconds for the KeepAlive timer established with the peer. The value of this object is calculated by this BGP speaker such that, when compared… |
| 1.3.6.1.4.1.2272.1.8.101.17.10.4 | NodercIpBgpTmpPeerAfCounters | |||
| 1.3.6.1.4.1.2272.1.8.101.17.10.4.1 | TablercIpBgpTmpPeerAfCountersTable | not-accessible | current | The counters associated with a BGP Peer. |
| 1.3.6.1.4.1.2272.1.8.101.17.10.4.1.1 | RowrcIpBgpTmpPeerAfCountersEntry | not-accessible | current | Each entry contains counters of message transmissions and FSM transitions for a given BGP Peering session. |
| 1.3.6.1.4.1.2272.1.8.101.17.10.4.1.1.1 | ColumnrcIpBgpTmpPeerAfInUpdates | read-only | current | The number of BGP UPDATE messages received on this connection. |
| 1.3.6.1.4.1.2272.1.8.101.17.10.4.1.1.2 | ColumnrcIpBgpTmpPeerAfOutUpdates | read-only | current | The number of BGP UPDATE messages transmitted on this connection. |
| 1.3.6.1.4.1.2272.1.8.101.17.10.4.1.1.3 | ColumnrcIpBgpTmpPeerAfInTotalMessages | read-only | current | The total number of messages received from the remote peer on this connection. |
| 1.3.6.1.4.1.2272.1.8.101.17.10.4.1.1.4 | ColumnrcIpBgpTmpPeerAfOutTotalMessages | read-only | current | The total number of messages transmitted to the remote peer on this connection. |
| 1.3.6.1.4.1.2272.1.8.101.17.10.4.1.1.5 | ColumnrcIpBgpTmpPeerAfFsmEstablishedTransitions | read-only | current | The total number of times the BGP FSM transitioned into the established state for this peer. |
| 1.3.6.1.4.1.2272.1.8.101.17.11 | NodercIpBgpTmpRib | |||
| 1.3.6.1.4.1.2272.1.8.101.17.11.1 | TablercIpBgpTmpNlriTable | not-accessible | current | The BGP-4 Received Path Attribute Table contains information about paths to destination networks received from all BGP4 peers. Collectively, this represents th… |
| 1.3.6.1.4.1.2272.1.8.101.17.11.1.1 | RowrcIpBgpTmpNlriEntry | not-accessible | current | Information about a path to a network. |
| 1.3.6.1.4.1.2272.1.8.101.17.11.1.1.1 | ColumnrcIpBgpTmpNlriIndex | not-accessible | current | This index allows for multiple instances of a base prefix for a certain AFI-SAFI from a given peer. This is currently useful for two things: 1. Allowing for a … |
| 1.3.6.1.4.1.2272.1.8.101.17.11.1.1.2 | ColumnrcIpBgpTmpNlriAfi | not-accessible | current | The address family of the prefix for this NLRI. Note that the AFI is not necessarily equivalent to the an InetAddressType. |
| 1.3.6.1.4.1.2272.1.8.101.17.11.1.1.3 | ColumnrcIpBgpTmpNlriSafi | not-accessible | current | The subsequent address family of the prefix for this NLRI |
| 1.3.6.1.4.1.2272.1.8.101.17.11.1.1.4 | ColumnrcIpBgpTmpNlriPrefixType | read-only | current | The type of the IP address prefix in the Network Layer Reachability Information field. The value of this object is derived from the appropriate value from the … |
| 1.3.6.1.4.1.2272.1.8.101.17.11.1.1.5 | ColumnrcIpBgpTmpNlriPrefix | not-accessible | current | An IP address prefix in the Network Layer Reachability Information field. This object is an IP address containing the prefix with length specified by rcIpBgpTm… |
| 1.3.6.1.4.1.2272.1.8.101.17.11.1.1.6 | ColumnrcIpBgpTmpNlriPrefixLen | not-accessible | current | Length in bits of the address prefix in the Network Layer Reachability Information field. |
| 1.3.6.1.4.1.2272.1.8.101.17.11.1.1.7 | ColumnrcIpBgpTmpNlriBest | read-only | current | An indication of whether or not this route was chosen as the best BGP4 route for this destination. |
| 1.3.6.1.4.1.2272.1.8.101.17.11.1.1.8 | ColumnrcIpBgpTmpNlriCalcLocalPref | read-only | current | The degree of preference calculated by the receiving BGP4 speaker for an advertised route. In the case where this prefix is ineligible, this object will be abs… |
| 1.3.6.1.4.1.2272.1.8.101.17.11.1.1.9 | ColumnrcIpBgpTmpAfPathAttrIndex | read-only | current | This value is a unique index for entries in the rcIpBgpTmpAfPathAttrTable. It is assigned by the agent at the point of creation of the rcIpBgpTmpAfPathAttrTabl… |
| 1.3.6.1.4.1.2272.1.8.101.17.11.1.1.10 | ColumnrcIpBgpTmpAfPathAttrUnknownIndex | read-only | current | This value is a unique index for entries in the rcIpBgpTmpAfPathAttrUnknownTable. It is assigned by the agent at the point of creation of the rcIpBgpTmpAfPathA… |
| 1.3.6.1.4.1.2272.1.8.101.17.11.3 | ScalarrcIpBgpTmpAfPathAttrCounter | read-only | current | The number of entries in the rcIpBgpTmpAfPathAttrTable. |
| 1.3.6.1.4.1.2272.1.8.101.17.11.4 | TablercIpBgpTmpAfPathAttrTable | not-accessible | current | Provides per advertised network-prefix attribute data, as advertised over a peering session. |
| 1.3.6.1.4.1.2272.1.8.101.17.11.4.1 | RowrcIpBgpTmpAfPathAttrEntry | not-accessible | current | Each entry contains data about path attributes associated with a given prefix in the rcIpBgpTmpNlriTable. |
| 1.3.6.1.4.1.2272.1.8.101.17.11.4.1.1 | ColumnrcIpBgpTmpAfPathAttrOrigin | read-only | current | The ultimate origin of the path information. |
| 1.3.6.1.4.1.2272.1.8.101.17.11.4.1.2 | ColumnrcIpBgpTmpAfPathAttrNextHopAddrType | read-only | current | The address family of the address for the border router that should be used to access the destination network. |
| 1.3.6.1.4.1.2272.1.8.101.17.11.4.1.3 | ColumnrcIpBgpTmpAfPathAttrNextHopAddr | read-only | current | The address of the border router that should be used to access the destination network. This address is the nexthop address received in the UPDATE packet assoc… |
| 1.3.6.1.4.1.2272.1.8.101.17.11.4.1.4 | ColumnrcIpBgpTmpAfPathAttrLinkLocalNextHopAddrType | read-only | current | The address type for IPv6 link local addresses. This is present only when receiving RFC 2545 style double nexthops. This object is optionally present in BGP im… |
| 1.3.6.1.4.1.2272.1.8.101.17.11.4.1.5 | ColumnrcIpBgpTmpAfPathAttrLinkLocalNextHopAddr | read-only | current | This value contains an IPv6 link local address and is present only when receiving RFC 2545 style double nexthops. This object is optionally present in BGP impl… |
| 1.3.6.1.4.1.2272.1.8.101.17.11.4.1.6 | ColumnrcIpBgpTmpAfPathAttrMedPresent | read-only | current | This value is true when the MED value was sent in the UPDATE message. |
| 1.3.6.1.4.1.2272.1.8.101.17.11.4.1.7 | ColumnrcIpBgpTmpAfPathAttrMed | read-only | current | This metric is used to discriminate between multiple exit points to an adjacent autonomous system. When the MED value is absent but has a calculated default va… |
| 1.3.6.1.4.1.2272.1.8.101.17.11.4.1.8 | ColumnrcIpBgpTmpAfPathAttrLocalPref | read-only | current | The originating BGP4 speakers degree of preference for an advertised route. If the route was not sent with a LOCAL_PREF value, this object will be absent. |
| 1.3.6.1.4.1.2272.1.8.101.17.11.4.1.9 | ColumnrcIpBgpTmpAfPathAttrAtomicAggregate | read-only | current | When this object is set to atomicAggregatePresent, the ATOMIC_AGGREGATE Path Attribute is present and indicates that the NLRI MUST NOT be made more specific. |
| 1.3.6.1.4.1.2272.1.8.101.17.11.4.1.10 | ColumnrcIpBgpTmpAfPathAttrAggregatorAS | read-only | current | The AS number of the last BGP4 speaker that performed route aggregation. If the AGGREGATOR path attribute is absent, this object will not be present in the con… |
| 1.3.6.1.4.1.2272.1.8.101.17.11.4.1.11 | ColumnrcIpBgpTmpAfPathAttrAggregatorAddr | read-only | current | The IP address of the last BGP4 speaker that performed route aggregation. If the AGGREGATOR path attribute is absent, this object will not be present in the co… |
| 1.3.6.1.4.1.2272.1.8.101.17.11.4.1.12 | ColumnrcIpBgpTmpAsPathCalcLength | read-only | current | This value represents the calculated length of the AS Path according to the rules of the BGP specification. This value is used in route selection. |
| 1.3.6.1.4.1.2272.1.8.101.17.11.4.1.13 | ColumnrcIpBgpTmpAsPathIndex | read-only | current | This value is a unique index for the decomposed AS Path in the rcIpBgpTmpAsPathTable. It is assigned by the agent at the point of creation of the rcIpBgpTmpAsP… |
| 1.3.6.1.4.1.2272.1.8.101.17.11.4.1.14 | ColumnrcIpBgpTmpAsPathString | read-only | current | This is a string depicting the autonomous system path to this network which was received from the peer which advertised it. The format of the string is impleme… |
| 1.3.6.1.4.1.2272.1.8.101.17.12 | NodercIpBgpTmpExtensions | |||
| 1.3.6.1.4.1.2272.1.8.102 | NodercIpMpls | |||
| 1.3.6.1.4.1.2272.1.8.102.1 | NodercIpMplsGlobalGroup | |||
| 1.3.6.1.4.1.2272.1.8.102.1.1 | ScalarrcIpMplsGlobalAdminStatus | read-write | current | Disable or Enable MPLS globally |
| 1.3.6.1.4.1.2272.1.8.102.1.2 | ScalarrcIpMplsGlobalRouterId | read-write | current | IP address of the interface to be used as router-id |
| 1.3.6.1.4.1.2272.1.8.102.1.3 | ScalarrcIpMplsGlobalAutomaticBeLsp | read-write | current | Flag to control automatic generation of next hop LSP. |
| 1.3.6.1.4.1.2272.1.8.102.1.4 | ScalarrcIpMplsGlobalLspMerge | read-write | current | Not used in this release. |
| 1.3.6.1.4.1.2272.1.8.102.1.5 | ScalarrcIpMplsGlobalDiffServDef | read-write | current | Not used in this release. |
| 1.3.6.1.4.1.2272.1.8.102.1.6 | ScalarrcIpMplsGlobalTtl | read-write | current | To set the time to live in hops when IP packets are being encapsulated in MPLS |
| 1.3.6.1.4.1.2272.1.8.102.1.7 | ScalarrcIpMplsGlobalLabelMgmtFlag | read-write | current | To set the time to live in hops when IP packets are being encapsulated in MPLS |
| 1.3.6.1.4.1.2272.1.8.102.1.8 | ScalarrcIpMplsGlobalSessionMgmtFlag | read-write | current | To set the time to live in hops when IP packets are being encapsulated in MPLS |
| 1.3.6.1.4.1.2272.1.8.102.1.9 | ScalarrcIpMplsGlobalLspMgmtFlag | read-write | current | To set the time to live in hops when IP packets are being encapsulated in MPLS |
| 1.3.6.1.4.1.2272.1.8.102.1.10 | ScalarrcIpMplsGlobalTrafficControlFlag | read-write | current | To set the time to live in hops when IP packets are being encapsulated in MPLS |
| 1.3.6.1.4.1.2272.1.8.102.1.11 | ScalarrcIpMplsGlobalInactiveLspRestartTime | read-write | current | Timer to initiate setting up a tunnel that previously failed. |
| 1.3.6.1.4.1.2272.1.8.102.1.12 | ScalarrcIpMplsGlobalInactiveLspRestartCount | read-write | current | This parameter - if set to some non-zero (1-255) value, after that many failed trial of initiating a tunnel it will stop re-trying. But if set to 0(zero) it wi… |
| 1.3.6.1.4.1.2272.1.8.102.2 | ScalarrcIpMplsInterfaceTableSize | read-only | current | Size of Mpls Interface Table |
| 1.3.6.1.4.1.2272.1.8.102.3 | TablercIpMplsInterfaceTable | not-accessible | current | Table of configured Mpls Interfaces. |
| 1.3.6.1.4.1.2272.1.8.102.3.1 | RowrcIpMplsInterfaceEntry | not-accessible | current | An entry of rcIpMpls Interfaces In Table. |
| 1.3.6.1.4.1.2272.1.8.102.3.1.1 | ColumnrcIpMplsInterfaceLay3Addr | not-accessible | current | Layer 3 address for the MPLS interface. |
| 1.3.6.1.4.1.2272.1.8.102.3.1.2 | ColumnrcIpMplsInterfaceLay3Mask | not-accessible | current | Layer 3 mask for the MPLS interface. |
| 1.3.6.1.4.1.2272.1.8.102.3.1.3 | ColumnrcIpMplsInterfaceIndex | read-only | current | Interface index for the IP interface. |
| 1.3.6.1.4.1.2272.1.8.102.3.1.4 | ColumnrcIpMplsInterfaceAdminStatus | read-create | current | Indicates whether the MPLS interface is enabled or not. |
| 1.3.6.1.4.1.2272.1.8.102.3.1.5 | ColumnrcIpMplsInterfaceIndLblDistMode | read-create | current | Indicates if the label distribution mode is independent or ordered. |
| 1.3.6.1.4.1.2272.1.8.102.3.1.6 | ColumnrcIpMplsInterfaceConsLblRetenMode | read-create | current | Indicates if conservative or liberal retention mode is used for the MPLS interface. |
| 1.3.6.1.4.1.2272.1.8.102.3.1.7 | ColumnrcIpMplsInterfaceImdLblUseMode | read-create | current | Indicates what label-use-mode is used by the MPLS interface. |
| 1.3.6.1.4.1.2272.1.8.102.3.1.8 | ColumnrcIpMplsInterfaceNoRouteReqRetryMode | read-create | current | Not used in this release. |
| 1.3.6.1.4.1.2272.1.8.102.3.1.9 | ColumnrcIpMplsInterfacePenultimatePopRequest | read-create | current | Flag to indicate whether to give implicit NULL labels for local networks. |
| 1.3.6.1.4.1.2272.1.8.102.3.1.10 | ColumnrcIpMplsInterfacePropogateLabelReleaseRequest | read-create | current | Not used in this release. |
| 1.3.6.1.4.1.2272.1.8.102.3.1.11 | ColumnrcIpMplsInterfaceLabelRequestMode | read-create | current | Indicates the label requiest mode used by the MPLS interface. |
| 1.3.6.1.4.1.2272.1.8.102.3.1.12 | ColumnrcIpMplsInterfaceOnDemandAdvMode | read-create | current | Indicates the label advertise mode used by the MPLS interface. |
| 1.3.6.1.4.1.2272.1.8.102.3.1.13 | ColumnrcIpMplsInterfaceMtu | read-create | current | Not used in this release. |
| 1.3.6.1.4.1.2272.1.8.102.3.1.14 | ColumnrcIpMplsInterfaceLabelProtocol | read-create | current | Indicates the label protocol used by the interface. |
| 1.3.6.1.4.1.2272.1.8.102.3.1.15 | ColumnrcIpMplsInterfaceTraceFlag | read-create | current | Flag used for tracing. |
| 1.3.6.1.4.1.2272.1.8.102.3.1.16 | ColumnrcIpMplsInterfaceRowStatus | read-create | current | Row Status for create/delete |
| 1.3.6.1.4.1.2272.1.8.102.4 | NodercIpMplsRsvpGroup | |||
| 1.3.6.1.4.1.2272.1.8.102.4.1 | ScalarrcIpMplsRsvpAdminStatus | read-write | current | State of global RSVP - enabled or disabled |
| 1.3.6.1.4.1.2272.1.8.102.4.2 | ScalarrcIpMplsRsvpPathUpdateTime | read-write | current | Time interval in seconds to update PATH soft states |
| 1.3.6.1.4.1.2272.1.8.102.4.3 | ScalarrcIpMplsRsvpResvUpdateTime | read-write | current | Time interval in seconds to update RESV soft states |
| 1.3.6.1.4.1.2272.1.8.102.4.4 | ScalarrcIpMplsRsvpHelloTime | read-write | current | Time interval in milli-seconds to send hello message |
| 1.3.6.1.4.1.2272.1.8.102.4.5 | ScalarrcIpMplsRsvpBlockStateAgingTime | read-write | current | PSB blockade state aging time in seconds |
| 1.3.6.1.4.1.2272.1.8.102.4.6 | ScalarrcIpMplsRsvpMaxBundleMsgSize | read-write | current | Maximum BUNDLE message size |
| 1.3.6.1.4.1.2272.1.8.102.4.7 | ScalarrcIpMplsRsvpMaxBundleMsgTime | read-write | current | Maximum time in milli-seconds for an outgoing RSVP message to wait before being sent in the outgoing BUNDLE message |
| 1.3.6.1.4.1.2272.1.8.102.4.8 | ScalarrcIpMplsRsvpMaxAckMsgTime | read-write | current | Maximum time in milli-seconds for an outgoing RSVP MESSAGE_ID_ACK/ RSVP MESSAGE_ID_NACK object to wait before being sent as a piggy-back in an unrelated RSVP m… |
| 1.3.6.1.4.1.2272.1.8.102.4.9 | ScalarrcIpMplsRsvpMaxAckMsgs | read-write | current | Maximum number of RSVP MESSAGE_ID_ACK/ RSVP MESSAGE_ID_NACK objects to be sent in a single RSVP ACK message |
| 1.3.6.1.4.1.2272.1.8.102.4.10 | ScalarrcIpMplsRsvpMaxMsgIdListSize | read-write | current | Maximum size of MESSAGE_ID_LIST object in MESSAGE_IDs |
| 1.3.6.1.4.1.2272.1.8.102.4.11 | ScalarrcIpMplsRsvpMaxMsgIdListTime | read-write | current | Maximum time in milli-seconds for an outgoing RSVP refresh message to wait before being sent out |
| 1.3.6.1.4.1.2272.1.8.102.4.12 | ScalarrcIpMplsRsvpMaxPiggyBackMsgAcks | read-write | current | Maximum number of RSVP MESSAGE_ID_ACK/ RSVP MESSAGE_ID_NACK objects to be piggy-backed on a single RSVP non-ACK message |
| 1.3.6.1.4.1.2272.1.8.102.4.13 | ScalarrcIpMplsRsvpPathAgingTimeMult | read-write | current | PATH soft state aging time multiplier - how many times to miss PATH refresh before considering PSB aged out |
| 1.3.6.1.4.1.2272.1.8.102.4.14 | ScalarrcIpMplsRsvpResvAgingTimeMult | read-write | current | RESV soft state aging time multiplier - how many times to miss RESV refresh before considering RSB filterspec aged out |
| 1.3.6.1.4.1.2272.1.8.102.4.15 | ScalarrcIpMplsRsvpHelloAgingTimeMult | read-write | current | Hello aging time multiplier - how many times to miss Hello/HelloAck message before considering link down |
| 1.3.6.1.4.1.2272.1.8.102.4.16 | ScalarrcIpMplsRsvpPathVectorLimit | read-write | current | Path vector limit |
| 1.3.6.1.4.1.2272.1.8.102.4.17 | ScalarrcIpMplsRsvpHopCountLimit | read-write | current | Maximum hop count |
| 1.3.6.1.4.1.2272.1.8.102.4.18 | ScalarrcIpMplsRsvpRapidRetransTime | read-write | current | Initial rapid re-transmission time in milli-seconds |
| 1.3.6.1.4.1.2272.1.8.102.4.19 | ScalarrcIpMplsRsvpRapidRetransIncrement | read-write | current | Rapid re-transmission increment |
| 1.3.6.1.4.1.2272.1.8.102.4.20 | ScalarrcIpMplsRsvpRapidRetransLimit | read-write | current | Maximum number of attempts to re-transmit message |
| 1.3.6.1.4.1.2272.1.8.102.4.21 | ScalarrcIpMplsRsvpReqResvConfFlag | read-write | current | Require RSVP ResvConf message on successful reservations |
| 1.3.6.1.4.1.2272.1.8.102.4.22 | ScalarrcIpMplsRsvpPathRemoveFlag | read-write | current | Enable Path_State_Removed flag using in ERROR_SPEC object of PATH_ERR message |
| 1.3.6.1.4.1.2272.1.8.102.4.23 | ScalarrcIpMplsRsvpProtectDomainFlag | read-write | current | Protection Domain support |
| 1.3.6.1.4.1.2272.1.8.102.4.24 | ScalarrcIpMplsRsvpPathTraceFlag | read-write | current | enable PATH direction tracing |
| 1.3.6.1.4.1.2272.1.8.102.4.25 | ScalarrcIpMplsRsvpResvTraceFlag | read-write | current | enable RESV direction tracing |
| 1.3.6.1.4.1.2272.1.8.102.4.26 | ScalarrcIpMplsRsvpTrafficControlTraceFlag | read-write | current | enable traffic control tracing |
| 1.3.6.1.4.1.2272.1.8.102.4.27 | ScalarrcIpMplsRsvpSessionTraceFlag | read-write | current | enable session management tracing |
| 1.3.6.1.4.1.2272.1.8.102.5 | NodercIpMplsLdpGroup | |||
| 1.3.6.1.4.1.2272.1.8.102.5.1 | ScalarrcIpMplsLdpAdminStatus | read-write | current | Indicates qhetehr global LDP is enabled or disabled. |
| 1.3.6.1.4.1.2272.1.8.102.5.2 | ScalarrcIpMplsLdpHoldTime | read-write | current | Keep alive time for LDP peers. |
| 1.3.6.1.4.1.2272.1.8.102.5.3 | ScalarrcIpMplsLdpHelloHoldTime | read-write | current | Time for receiving link hello messages from peer. |
| 1.3.6.1.4.1.2272.1.8.102.5.4 | ScalarrcIpMplsLdpHelloInterval | read-write | current | Frequency of sending hello messages to peer. |
| 1.3.6.1.4.1.2272.1.8.102.5.5 | ScalarrcIpMplsLdpMaxHops | read-write | current | Maximum number of LSP hops for setting up an LSP. |
| 1.3.6.1.4.1.2272.1.8.102.5.6 | ScalarrcIpMplsLdpPathVectorLimit | read-write | current | Max hop count for loop detection. |
| 1.3.6.1.4.1.2272.1.8.102.5.7 | ScalarrcIpMplsLdpTgtHelloHoldTime | read-write | current | Time for receiving targetted link hello messages. |
| 1.3.6.1.4.1.2272.1.8.102.5.8 | ScalarrcIpMplsLdpLoopDetFlag | read-write | current | Flag to set loop detection capability. |
| 1.3.6.1.4.1.2272.1.8.102.5.9 | ScalarrcIpMplsLdpLblMergeFlag | read-write | current | Not used in this release. |
| 1.3.6.1.4.1.2272.1.8.102.5.10 | ScalarrcIpMplsLdpAuthFlag | read-write | current | Not used in this release. |
| 1.3.6.1.4.1.2272.1.8.102.6 | ScalarrcIpMplsLdpInterfaceTableSize | read-only | current | Size of Mpls LDP Interface Table |
| 1.3.6.1.4.1.2272.1.8.102.7 | TablercIpMplsLdpInterfaceTable | not-accessible | current | Table of configured Mpls LDP Interfaces. |
| 1.3.6.1.4.1.2272.1.8.102.7.1 | RowrcIpMplsLdpInterfaceEntry | not-accessible | current | An entry of rcIpMpls LDP Interfaces In Table. |
| 1.3.6.1.4.1.2272.1.8.102.7.1.1 | ColumnrcIpMplsLdpInterfaceLay3Addr | not-accessible | current | Layer 3 address of LDP interface. |
| 1.3.6.1.4.1.2272.1.8.102.7.1.2 | ColumnrcIpMplsLdpInterfaceLay3Mask | not-accessible | current | Layer3 mask for LDP interface. |
| 1.3.6.1.4.1.2272.1.8.102.7.1.3 | ColumnrcIpMplsLdpInterfaceIndex | read-only | current | Interface index for LDP interface. |
| 1.3.6.1.4.1.2272.1.8.102.7.1.4 | ColumnrcIpMplsLdpInterfaceTargetHelloFlag | read-create | current | Flag for enabling target hellos. |
| 1.3.6.1.4.1.2272.1.8.102.7.1.5 | ColumnrcIpMplsLdpInterfaceTargetResponseFlag | read-create | current | Flag to enable target response messgaes. |
| 1.3.6.1.4.1.2272.1.8.102.7.1.6 | ColumnrcIpMplsLdpInterfaceNonTtlLspFlag | read-create | current | Not used in this release. |
| 1.3.6.1.4.1.2272.1.8.102.7.1.7 | ColumnrcIpMplsLdpInterfaceRowStatus | read-create | current | Row status for the LDP interface. |
| 1.3.6.1.4.1.2272.1.8.102.8 | ScalarrcIpMplsRsvpInterfaceTableSize | read-only | current | Size of Mpls RSVP Interface Table |
| 1.3.6.1.4.1.2272.1.8.102.9 | TablercIpMplsRsvpInterfaceTable | not-accessible | current | Table of configured Mpls RSVP Interfaces. |
| 1.3.6.1.4.1.2272.1.8.102.9.1 | RowrcIpMplsRsvpInterfaceEntry | not-accessible | current | An entry of rcIpMpls RSVP Interfaces In Table. |
| 1.3.6.1.4.1.2272.1.8.102.9.1.1 | ColumnrcIpMplsRsvpInterfaceLay3Addr | not-accessible | current | Layer 3 address for RSVP interface. |
| 1.3.6.1.4.1.2272.1.8.102.9.1.2 | ColumnrcIpMplsRsvpInterfaceLay3Mask | not-accessible | current | Layer 3 mask for RSVP interface. |
| 1.3.6.1.4.1.2272.1.8.102.9.1.3 | ColumnrcIpMplsRsvpInterfaceIndex | read-only | current | Index for RSVP interface table. |
| 1.3.6.1.4.1.2272.1.8.102.9.1.4 | ColumnrcIpMplsRsvpInterfaceAuthFlag | read-create | current | Not used in this release. |
| 1.3.6.1.4.1.2272.1.8.102.9.1.5 | ColumnrcIpMplsRsvpInterfaceHelloFlag | read-create | current | Flag to enable RSVP interface hello. |
| 1.3.6.1.4.1.2272.1.8.102.9.1.6 | ColumnrcIpMplsRsvpInterfaceRefreshReductionFlag | read-create | current | Not used in this release. |
| 1.3.6.1.4.1.2272.1.8.102.9.1.7 | ColumnrcIpMplsRsvpInterfaceMemoryReductionFlag | read-create | current | Not used in this release. |
| 1.3.6.1.4.1.2272.1.8.102.9.1.8 | ColumnrcIpMplsRsvpInterfaceReliableFlag | read-create | current | Not used in this release. |
| 1.3.6.1.4.1.2272.1.8.102.9.1.9 | ColumnrcIpMplsRsvpInterfaceEPolicingFlag | read-create | current | Not used in this release. |
| 1.3.6.1.4.1.2272.1.8.102.9.1.10 | ColumnrcIpMplsRsvpInterfaceRowStatus | read-create | current | Row status for RSVP interface. |
| 1.3.6.1.4.1.2272.1.8.102.10 | ScalarrcIpMplsLdpTargetAddrTableSize | read-only | current | Size of Mpls LDP target address Table |
| 1.3.6.1.4.1.2272.1.8.102.11 | TablercIpMplsLdpTargetAddrTable | not-accessible | current | Table of configured Mpls LDP target addresses. |
| 1.3.6.1.4.1.2272.1.8.102.11.1 | RowrcIpMplsLdpTargetAddrEntry | not-accessible | current | An entry of rcIpMpls LDP target addresses In Table. |
| 1.3.6.1.4.1.2272.1.8.102.11.1.1 | ColumnrcIpMplsLdpTargetAddrBaseAddr | not-accessible | current | The LDP interface IP address for which target address should be configured |
| 1.3.6.1.4.1.2272.1.8.102.11.1.2 | ColumnrcIpMplsLdpTargetAddrTgtAddr | not-accessible | current | The IP address configured to be the LDP target address |
| 1.3.6.1.4.1.2272.1.8.102.11.1.3 | ColumnrcIpMplsLdpTargetAddrRowStatus | read-create | current | Row Status for LDP target address table. |
| 1.3.6.1.4.1.2272.1.8.102.12 | TablercIpMplsTunnelGroupTable | not-accessible | current | Table of Tunnel Groups. |
| 1.3.6.1.4.1.2272.1.8.102.12.1 | RowrcIpMplsTunnelGroupEntry | not-accessible | current | An entry of rcIpMpls tunnel group In Table. |
| 1.3.6.1.4.1.2272.1.8.102.12.1.1 | ColumnrcIpMplsTunnelGroupId | not-accessible | current | Tunnel Group Identifier |
| 1.3.6.1.4.1.2272.1.8.102.12.1.2 | ColumnrcIpMplsTunnelGroupDestAddr | read-create | current | Group the tunnels with same destination IP address into the tunnel group |
| 1.3.6.1.4.1.2272.1.8.102.12.1.3 | ColumnrcIpMplsTunnelGroupPrimaryTunnel | read-create | current | List of primary tunnels contained in the tunnel group, diplayed in the format of <tunnelId>/<priority>[,<tunnelId>/<priority>] |
| 1.3.6.1.4.1.2272.1.8.102.12.1.4 | ColumnrcIpMplsTunnelGroupActiveTunnel | read-only | current | Active tunnel id in the Tunnel Group |
| 1.3.6.1.4.1.2272.1.8.102.12.1.5 | ColumnrcIpMplsTunnelGroupPersistentFlag | read-create | current | Tunnel Group Persistent Flag |
| 1.3.6.1.4.1.2272.1.8.102.12.1.6 | ColumnrcIpMplsTunnelGroupOperation | read-create | current | Add tunnel to the Tunnel Group or remove tunnel from the tunnel group |
| 1.3.6.1.4.1.2272.1.8.102.12.1.7 | ColumnrcIpMplsTunnelGroupTunnelList | read-create | current | List of Tunnels contained in the tunnel group, diplayed in the format of <tunnelId>/<priority>[,<tunnelId>/<priority>], such as string 2,4,5 indicated the tunn… |
| 1.3.6.1.4.1.2272.1.8.102.12.1.8 | ColumnrcIpMplsTunnelGroupFtnList | read-only | current | List of fecs bineded to the tunnel group, the display format is same as rcIpMplsTunnelGroupTunnelList |
| 1.3.6.1.4.1.2272.1.8.102.12.1.9 | ColumnrcIpMplsTunnelGroupBgpNeighbor | read-only | current | BGP neigbors associated with the tunnel group |
| 1.3.6.1.4.1.2272.1.8.102.12.1.10 | ColumnrcIpMplsTunnelGroupRowStatus | read-create | current | Row status for create/delete the tunnel group. |
| 1.3.6.1.4.1.2272.1.8.102.12.1.11 | ColumnrcIpMplsTunnelGroupBackupTunnel | read-create | current | Backup tunnel id in the Tunnel Group displayed in the format <tunnelId/priority> |
| 1.3.6.1.4.1.2272.1.8.102.13 | NodercIpMplsTeGroup | |||
| 1.3.6.1.4.1.2272.1.8.102.13.1 | ScalarrcIpMplsTeFloodThresholdStart | read-write | current | First TE flooding threshold for significant bandwidth change in percent. |
| 1.3.6.1.4.1.2272.1.8.102.13.2 | ScalarrcIpMplsTeFloodThresholdDelta | read-write | current | Delta TE flooding threshold for significant Bandwidth change in percent. After start threshold is hit every delta change in link bandwidth results in flooding … |
| 1.3.6.1.4.1.2272.1.8.102.14 | TablercIpMplsTeInterfaceTable | not-accessible | current | rcIpMplsInterface Traffic-Eng table. This table contains rows which are traffic-eng configuration parameters for the link. |
| 1.3.6.1.4.1.2272.1.8.102.14.1 | RowrcIpMplsTeInterfaceEntry | not-accessible | current | An entry of rcIpMplsInterface Te Table. |
| 1.3.6.1.4.1.2272.1.8.102.14.1.1 | ColumnrcIpMplsTeInterfaceLay3Addr | not-accessible | current | Layer 3 address for the MPLS interface. |
| 1.3.6.1.4.1.2272.1.8.102.14.1.2 | ColumnrcIpMplsTeInterfaceLay3Mask | read-only | current | Layer 3 mask for the MPLS interface. |
| 1.3.6.1.4.1.2272.1.8.102.14.1.3 | ColumnrcIpMplsTeInterfaceIndex | read-only | current | Interface index for the IP interface. |
| 1.3.6.1.4.1.2272.1.8.102.14.1.4 | ColumnrcIpMplsTeInterfaceIgp | read-write | current | Traffic-eng IGP protocol to use on link. |
| 1.3.6.1.4.1.2272.1.8.102.14.1.5 | ColumnrcIpMplsTeInterfaceMetric | read-write | current | Traffic-eng metric to assign to the link. |
| 1.3.6.1.4.1.2272.1.8.102.14.1.6 | ColumnrcIpMplsTeInterfaceMaxBandwidth | read-write | current | Maximum bandwidth on the link in bits/sec in the direction outwards from the local system. |
| 1.3.6.1.4.1.2272.1.8.102.14.1.7 | ColumnrcIpMplsTeInterfaceMaxReservableBandwidth | read-write | current | Maximum reservable bandwidth on the link in bits/sec in the direction outwards from the local system. |
| 1.3.6.1.4.1.2272.1.8.102.14.1.8 | ColumnrcIpMplsTeInterfaceResourceColor | read-write | current | Resource class/color which represents administrative group membership for the link. The integer value represents the format of a hexadecimal 32-bit mask. A lin… |
| 1.3.6.1.4.1.2272.1.8.102.15 | TablercIpMplsTunnelTable | not-accessible | current | Table of Tunnels with label record info . |
| 1.3.6.1.4.1.2272.1.8.102.15.1 | RowrcIpMplsTunnelEntry | not-accessible | current | An entry of rcIpMpls tunnel In Table. |
| 1.3.6.1.4.1.2272.1.8.102.15.1.1 | ColumnrcIpMplsTunnelId | not-accessible | current | Tunnel Identifier |
| 1.3.6.1.4.1.2272.1.8.102.15.1.2 | ColumnrcIpMplsTunnelLabelRecordFlag | read-create | current | Tunnel Identifier |
| 1.3.6.1.4.1.2272.1.8.102.15.1.3 | ColumnrcIpMplsTunnelRowStatus | read-create | current | Creation or deletion of row |
| 1.3.6.1.4.1.2272.1.8.102.16 | TablercIpMplsTunnelExtTable | not-accessible | current | The mplsTunnelExtTable provides enterprise extension options for a mplsTunnelEntry that has be created for a MPLS tunnel. The mplsTunnelEntry must be created a… |
| 1.3.6.1.4.1.2272.1.8.102.16.1 | RowrcIpMplsTunnelExtEntry | not-accessible | current | An entry of rcIpMpls Tunnel Ext Table. |
| 1.3.6.1.4.1.2272.1.8.102.16.1.1 | ColumnrcIpMplsTunnelExtIndex | not-accessible | current | Uniquely identifies this row. This an index object for the mplsTunnelExtTable entry that in part also specifies the mpls tunnel entry with which this tunnel ex… |
| 1.3.6.1.4.1.2272.1.8.102.16.1.2 | ColumnrcIpMplsTunnelExtInstance | not-accessible | current | Uniquely identifies an instance of a tunnel's extended entry. This an index object for the mplsTunnelExtTable entry that in part specifies the mpls tunnel with… |
| 1.3.6.1.4.1.2272.1.8.102.16.1.3 | ColumnrcIpMplsTunnelExtEgressLSRId | not-accessible | current | The purpose of this object is to uniquely identity a tunnel within a network to which this extended tunnel table entry should apply. This an index object for t… |
| 1.3.6.1.4.1.2272.1.8.102.16.1.4 | ColumnrcIpMplsTunnelExtIngressLSRId | not-accessible | current | Specifies the egress LSR id for which this extended tunnel table entry should apply. This is an index object for the mplsTunnelExtTable entry that in part spec… |
| 1.3.6.1.4.1.2272.1.8.102.16.1.5 | ColumnrcIpMplsTunnelExtFrrTableIndex | read-create | current | Index into the mplsTunnelFrrTable entry that specifies the frr path to use for the tunnel that implied by the index objects of this row entry. Specifying a frr… |
| 1.3.6.1.4.1.2272.1.8.102.16.1.6 | ColumnrcIpMplsTunnelExtRowStatus | read-create | current | This variable is used to create, modify, and/or delete a row in this table. |
| 1.3.6.1.4.1.2272.1.8.102.17 | TablercIpMplsTunnelFrrTable | not-accessible | current | The rcIpMplsTunnelFrrTable is used to indicate the frr constraints for a frr detour LSP for a tunnel specified as row entry in the mplsTunnelTable.The frr cons… |
| 1.3.6.1.4.1.2272.1.8.102.17.1 | RowrcIpMplsTunnelFrrEntry | not-accessible | current | An entry in this table represents a tunnel frr path. An entry is created by a network administrator for signaled LSP with frr path set up by an MPLS signaling … |
| 1.3.6.1.4.1.2272.1.8.102.17.1.1 | ColumnrcIpMplsTunnelFrrListIndex | not-accessible | current | Primary index into this table identifying a particular row entry of frr detour LSP contraints. |
| 1.3.6.1.4.1.2272.1.8.102.17.1.2 | ColumnrcIpMplsTunnelFrrSetupPrio | read-create | current | Setup priority for frr detour LSP. |
| 1.3.6.1.4.1.2272.1.8.102.17.1.3 | ColumnrcIpMplsTunnelFrrHoldingPrio | read-create | current | Holding priority for frr detour LSP. |
| 1.3.6.1.4.1.2272.1.8.102.17.1.4 | ColumnrcIpMplsTunnelFrrHopLimit | read-create | current | Maximum number of hops a frr detour LSP is allowed to traverse. |
| 1.3.6.1.4.1.2272.1.8.102.17.1.5 | ColumnrcIpMplsTunnelFrrBandwidth | read-create | current | Bandwidth estimate with which to set up the frr detour LSPs in units of a million bits per second (Mbps). |
| 1.3.6.1.4.1.2272.1.8.102.17.1.6 | ColumnrcIpMplsTunnelFrrProtectionType | read-create | current | Frr backup or resource protection type to be used. |
| 1.3.6.1.4.1.2272.1.8.102.17.1.7 | ColumnrcIpMplsTunnelFrrExclAnyAffinity | read-create | current | Exclude any link in detour LSP setup which is represented by administratively defined attributes associated with the bit pattern of this object. The value repr… |
| 1.3.6.1.4.1.2272.1.8.102.17.1.8 | ColumnrcIpMplsTunnelFrrInclAnyAffinity | read-create | current | Allow detour LSP setup on any link which is represented by administratively defined attributes associated with the bit pattern of this object. The value repres… |
| 1.3.6.1.4.1.2272.1.8.102.17.1.9 | ColumnrcIpMplsTunnelFrrInclAllAffinity | read-create | current | Only allow detour LSP setup on links which contain at a minimum the administratively defined attributes represented by this bit pattern. The value represents t… |
| 1.3.6.1.4.1.2272.1.8.102.17.1.10 | ColumnrcIpMplsTunnelFrrLegacyFlag | read-create | current | Flag to control the format of the frr object used. When set to true, the legacy format is used which is a class type of 7. When set to false the frr format use… |
| 1.3.6.1.4.1.2272.1.8.102.17.1.11 | ColumnrcIpMplsTunnelFrrRowStatus | read-create | current | This variable is used to create, modify, and/or delete a row in this table. |
| 1.3.6.1.4.1.2272.1.8.102.18 | TablercIpMplsTunnelHopToIpAddrMapTable | not-accessible | current | The rcIpMplsTunnelHopToIpAddrMapTable is used to maintain mapping between Hop name and IP Address. |
| 1.3.6.1.4.1.2272.1.8.102.18.1 | RowrcIpMplsTunnelHopToIpAddrMapEntry | not-accessible | current | An entry in this table represents a mapping between Hop name and the IP Address. |
| 1.3.6.1.4.1.2272.1.8.102.18.1.1 | ColumnrcIpMplsTunnelHopToIpAddrMapHopName | not-accessible | current | Primary index into this table identifying a hop name. |
| 1.3.6.1.4.1.2272.1.8.102.18.1.2 | ColumnrcIpMplsTunnelHopToIpAddrMapIPAddr | read-create | current | Table column, identifying an IP Address. |
| 1.3.6.1.4.1.2272.1.8.102.18.1.3 | ColumnrcIpMplsTunnelHopToIpAddrMapIPAddrPrefixLen | read-create | current | Table column identifying IP Address prefix length. |
| 1.3.6.1.4.1.2272.1.8.102.18.1.4 | ColumnrcIpMplsTunnelHopToIpAddrMapRowStatus | read-create | current | Row status. |
| 1.3.6.1.4.1.2272.1.8.102.19 | TablercIpMplsLspTable | not-accessible | current | Table of originated, terminated and transit operational LSPs with all cross connect information |
| 1.3.6.1.4.1.2272.1.8.102.19.1 | RowrcIpMplsLspEntry | not-accessible | current | An entry of rcIpMpls Lsp in Table. |
| 1.3.6.1.4.1.2272.1.8.102.19.1.1 | ColumnrcIpMplsLspTunnelIndex | not-accessible | current | Tunnel Index |
| 1.3.6.1.4.1.2272.1.8.102.19.1.2 | ColumnrcIpMplsLspId | not-accessible | current | LSP ID |
| 1.3.6.1.4.1.2272.1.8.102.19.1.3 | ColumnrcIpMplsLspIngressLsrId | not-accessible | current | Specifies the Ingress LSR Id |
| 1.3.6.1.4.1.2272.1.8.102.19.1.4 | ColumnrcIpMplsLspEgressLsrId | not-accessible | current | Specifies the Egress LSR Id |
| 1.3.6.1.4.1.2272.1.8.102.19.1.5 | ColumnrcIpMplsLspName | read-only | current | LSP Name |
| 1.3.6.1.4.1.2272.1.8.102.19.1.6 | ColumnrcIpMplsLspType | read-only | current | This value signifies the role that this tunnel entry/instance represents. This value MUST be set to head(1) at the originating point of the tunnel. This value … |
| 1.3.6.1.4.1.2272.1.8.102.19.1.7 | ColumnrcIpMplsLspDetour | read-only | current | The tunnel is a detour tunnel or not |
| 1.3.6.1.4.1.2272.1.8.102.19.1.8 | ColumnrcIpMplsLspIncomingInterface | read-only | current | LSR-assigned ifIndex |
| 1.3.6.1.4.1.2272.1.8.102.19.1.9 | ColumnrcIpMplsLspIncomingLabel | read-only | current | Incoming Label value |
| 1.3.6.1.4.1.2272.1.8.102.19.1.10 | ColumnrcIpMplsLspOutgoingInterface | read-only | current | LSR-assigned ifIndex |
| 1.3.6.1.4.1.2272.1.8.102.19.1.11 | ColumnrcIpMplsLspOutgoingLabel | read-only | current | Outgoing Label value |
| 1.3.6.1.4.1.2272.1.8.102.20 | TablercIpMplsIfTable | not-accessible | current | A table used to maintain MPLS information for a particular interface. |
| 1.3.6.1.4.1.2272.1.8.102.20.1 | RowrcIpMplsIfEntry | not-accessible | current | Entry containing MPLS information. An entry is automatically created in this table when MPLS is enabled for an interface -or- when an ip address is configured … |
| 1.3.6.1.4.1.2272.1.8.102.20.1.1 | ColumnrcIpMplsIfIfIndex | not-accessible | current | An unique value to identify a physical interface or a logical interface (VLAN). |
| 1.3.6.1.4.1.2272.1.8.102.20.1.2 | ColumnrcIpMplsIfLdpAdminState | read-create | current | Indicates whether LDP is enabled on the interface. |
| 1.3.6.1.4.1.2272.1.8.102.20.1.3 | ColumnrcIpMplsIfLdpSessionKeepAlive | read-create | current | Configures the LDP Session keep alive on the interface. The value 0 is used to indicate a global value. If 0 the interface will use the LDP global value. If gr… |
| 1.3.6.1.4.1.2272.1.8.102.20.1.4 | ColumnrcIpMplsIfLdpHelloHoldTime | read-create | current | Configures the LDP hello hold time on the interface. If 0 the interface will use the LDP global value. If greater than 0 this value will override the LDP globa… |
| 1.3.6.1.4.1.2272.1.8.102.20.1.5 | ColumnrcIpMplsIfLdpTransportAddr | read-create | current | Configures the transport address of the LDP lsp. If not set then transport address will be the MPLS router id. |
| 1.3.6.1.4.1.2272.1.8.102.20.1.6 | ColumnrcIpMplsIfLdpImportPolicy | read-create | current | Configures the LDP import policy behavior. If set to host-only then only host will import policies. If set to all then all interfaces will import policies. |
| 1.3.6.1.4.1.2272.1.8.102.20.1.7 | ColumnrcIpMplsIfRsvpAdminState | read-create | current | Indicates whether RSVP is enabled on the interface. |
| 1.3.6.1.4.1.2272.1.8.102.20.1.8 | ColumnrcIpMplsIfRefreshReduction | read-create | current | Indicates whether RSVP refresh reduction is enabled or not. If set to global, refresh reduction will take the global RSVP refresh reduction value. |
| 1.3.6.1.4.1.2272.1.8.102.20.1.9 | ColumnrcIpMplsIfRefreshInterval | read-create | current | Configures the RSVP refresh interval on the interface. If set to zero, the refresh interval will default to the global rsvp refresh interval. |
| 1.3.6.1.4.1.2272.1.8.102.20.1.10 | ColumnrcIpMplsIfRefreshMultiplier | read-create | current | Configures the RSVP refresh multiplier for the interface. If set to zero, the refresh interval will default to to global rsvp refresh multiplier. |
| 1.3.6.1.4.1.2272.1.8.102.20.1.11 | ColumnrcIpMplsIfRsvpHelloInterval | read-create | current | Configures the RSVP hello interval on the interface. If 0 the interface will use the RSVP global value. If greater than 0 this value will override the RSVP glo… |
| 1.3.6.1.4.1.2272.1.8.102.20.1.12 | ColumnrcIpMplsIfMessageBundling | read-create | current | Indicates whether RSVP message bundling is enabled or not. If set to global, message bundling will take the global RSVP message bundling value. |
| 1.3.6.1.4.1.2272.1.8.102.20.1.13 | ColumnrcIpMplsIfMtu | read-create | current | Configures the mtu of the mpls interface. The value cannot exceed that of the system mtu size. |
| 1.3.6.1.4.1.2272.1.8.102.20.1.14 | ColumnrcIpMplsIfRowStatus | read-create | current | Used to create/delete entries |
| 1.3.6.1.4.1.2272.1.8.102.20.1.15 | ColumnrcIpMplsIfAuthentication | read-create | current | Used to enable/disable RSVP MD5 authentication. |
| 1.3.6.1.4.1.2272.1.8.102.20.1.16 | ColumnrcIpMplsIfAuthenticationKey | read-create | current | RSVP MD5 authentication key. |
| 1.3.6.1.4.1.2272.1.8.102.20.1.17 | ColumnrcIpMplsIfAdminGroupList | read-create | current | Bitmap of admin group ids. The LSB is the lowest numbered admin group. |
| 1.3.6.1.4.1.2272.1.8.102.20.1.18 | ColumnrcIpMplsIfBandwidth | read-create | current | Maximum reservable bandwidth in kbps. |
| 1.3.6.1.4.1.2272.1.8.103 | NodercIpInterVrfStaticRoute | |||
| 1.3.6.1.4.1.2272.1.8.103.1 | ScalarrcIpInterVrfStaticRouteTableSize | read-only | current | size of Ip Static Route Table. |
| 1.3.6.1.4.1.2272.1.8.103.2 | TablercIpInterVrfStaticRouteTable | not-accessible | current | This table is used to add static IP routes to the device. Routes added into this table will automatically show-up in the 'rcIpRouteTable' when the device is ac… |
| 1.3.6.1.4.1.2272.1.8.103.2.1 | RowrcIpInterVrfStaticRouteEntry | not-accessible | current | A static route to a particular destination. |
| 1.3.6.1.4.1.2272.1.8.103.2.1.1 | ColumnrcIpInterVrfStaticRouteOwnerVrfId | not-accessible | current | Owner VRF id of the static route |
| 1.3.6.1.4.1.2272.1.8.103.2.1.2 | ColumnrcIpInterVrfStaticRouteDest | not-accessible | current | The destination IP address of this route. An entry with a value of 0.0.0.0 is considered a default route. Multiple routes to a single destination can appear in… |
| 1.3.6.1.4.1.2272.1.8.103.2.1.3 | ColumnrcIpInterVrfStaticRouteMask | not-accessible | current | Indicate the mask to be logical-ANDed with the destination address before being compared to the value in the rcIpRouteDest field. For those systems that do not… |
| 1.3.6.1.4.1.2272.1.8.103.2.1.4 | ColumnrcIpInterVrfStaticRouteNextHop | not-accessible | current | The IP address of the next hop of this route. (In the case of a route bound to an interface which is realized via a broadcast media, the value of this field is… |
| 1.3.6.1.4.1.2272.1.8.103.2.1.5 | ColumnrcIpInterVrfStaticRouteMetric | read-write | current | The primary routing metric for this route. The semantics of this metric are determined by the routing-protocol specified in the route's rcIpRouteProto value. I… |
| 1.3.6.1.4.1.2272.1.8.103.2.1.6 | ColumnrcIpInterVrfStaticRouteIfIndex | read-only | current | The index value which uniquely identifies the local interface through which the next hop of this route should be reached. The interface identified by a particu… |
| 1.3.6.1.4.1.2272.1.8.103.2.1.7 | ColumnrcIpInterVrfStaticRoutePreference | read-write | current | Used to indicate the route preference of this entry. If there are more than one route that can be used to forward IP traffic, the route that has a highest pref… |
| 1.3.6.1.4.1.2272.1.8.103.2.1.8 | ColumnrcIpInterVrfStaticRouteEnable | read-write | current | Used to enable/disable this entry. |
| 1.3.6.1.4.1.2272.1.8.103.2.1.9 | ColumnrcIpInterVrfStaticRouteStatus | read-only | current | Used to indicate the current status of this entry. |
| 1.3.6.1.4.1.2272.1.8.103.2.1.10 | ColumnrcIpInterVrfStaticRouteRowStatus | read-write | current | Used to create/delete entries |
| 1.3.6.1.4.1.2272.1.8.103.2.1.11 | ColumnrcIpInterVrfStaticRouteLocalNextHop | read-write | current | Used to enable/disable this entry. True indicate that the static route becomes active only if switch has a local route to the network. False indicates that the… |
| 1.3.6.1.4.1.2272.1.8.103.2.1.12 | ColumnrcIpInterVrfStaticRouteNextHopVrfId | read-write | current | Used to indicate nhVrfId in inter-VRF static-route configuration |
| 1.3.6.1.4.1.2272.1.8.104 | NodercIpBfd | |||
| 1.3.6.1.4.1.2272.1.8.104.1 | ScalarrcIpBfdTrapEnabled | read-write | current | Used to indicate whether BFD traps should be sent or not |
| 1.3.6.1.4.1.2272.1.8.104.2 | ScalarrcIpBfdHoldOffTimerInterval | read-write | current | This object specifies the hold off timer interval, in seconds. 0 means that hold off timer is disabled. |
| 1.3.6.1.4.1.2272.1.8.105 | NodercIpStaticMRoute | |||
| 1.3.6.1.4.1.2272.1.8.105.1 | NodercIpStaticMRouteMib | |||
| 1.3.6.1.4.1.2272.1.8.105.1.0 | NodercIpStaticMRouteNotifications | |||
| 1.3.6.1.4.1.2272.1.8.105.1.1 | NodercIpStaticMRouteObjects | |||
| 1.3.6.1.4.1.2272.1.8.105.1.1.1 | TablercIpStaticMRouteTable | not-accessible | current | This table is used by multicast routing protocols, i.e PIM-SM, PIM-SSM, MSDP and is not visible to any other L2/L3 Protocols. It provides the flexibility of se… |
| 1.3.6.1.4.1.2272.1.8.105.1.1.1.1 | RowrcIpStaticMRouteEntry | not-accessible | current | A static MRoute to a particular destination. |
| 1.3.6.1.4.1.2272.1.8.105.1.1.1.1.1 | ColumnrcIpStaticMRouteIpAddressType | not-accessible | current | The address type of Static MRoute IP address. |
| 1.3.6.1.4.1.2272.1.8.105.1.1.1.1.2 | ColumnrcIpStaticMRouteIpAddress | not-accessible | current | Static MRoute IP address denotes the destination network for which the route is being added. |
| 1.3.6.1.4.1.2272.1.8.105.1.1.1.1.3 | ColumnrcIpStaticMRouteMask | not-accessible | current | Denotes the IP subnet mask of the Static MRoute. |
| 1.3.6.1.4.1.2272.1.8.105.1.1.1.1.4 | ColumnrcIpStaticMRouteRpfAddressType | not-accessible | current | The address type of Static MRoute Rpf address. |
| 1.3.6.1.4.1.2272.1.8.105.1.1.1.1.5 | ColumnrcIpStaticMRouteRpfAddress | not-accessible | current | RPF address is the same as the nexthop in unicast Static IP route table. The RPF address denotes the RPF neighbor towards RP/Source. |
| 1.3.6.1.4.1.2272.1.8.105.1.1.1.1.6 | ColumnrcIpStaticMRoutePreference | read-create | current | Static MRoute Preference is the administrative distance for the given route. When unicast routing table and the multicast-static IP route table have different … |
| 1.3.6.1.4.1.2272.1.8.105.1.1.1.1.7 | ColumnrcIpStaticMRouteEnable | read-create | current | This denotes the status of the route in this table. It can either be enabled/disabled. |
| 1.3.6.1.4.1.2272.1.8.105.1.1.1.1.8 | ColumnrcIpStaticMRouteRowStatus | read-create | current | Creation and deletion of the row entry. |
| 1.3.6.1.4.1.2272.1.8.106 | NodercIpEcmp | |||
| 1.3.6.1.4.1.2272.1.8.106.1 | NodercIpEcmpMib | |||
| 1.3.6.1.4.1.2272.1.8.106.1.1 | NodercIpEcmpObjects | |||
| 1.3.6.1.4.1.2272.1.8.106.1.1.1 | TablercIpEcmpRouteTable | not-accessible | current | This is used to get the ECMP route for a given pair of source IP and destination IP addresses. |
| 1.3.6.1.4.1.2272.1.8.106.1.1.1.1 | RowrcIpEcmpRouteEntry | not-accessible | current | An entry of rcIpEcmpRouteTable. |
| 1.3.6.1.4.1.2272.1.8.106.1.1.1.1.1 | ColumnrcIpEcmpRouteSrcIp | not-accessible | current | Source IP |
| 1.3.6.1.4.1.2272.1.8.106.1.1.1.1.2 | ColumnrcIpEcmpRouteDstIp | not-accessible | current | Destination IP |
| 1.3.6.1.4.1.2272.1.8.106.1.1.1.1.3 | ColumnrcIpEcmpRouteDstMask | not-accessible | current | Destination IP mask |
| 1.3.6.1.4.1.2272.1.8.106.1.1.1.1.4 | ColumnrcIpEcmpRouteNextHopLegacy | read-only | current | Next-hop address if the ingress port is on a legacy card. |
| 1.3.6.1.4.1.2272.1.8.106.1.1.1.1.5 | ColumnrcIpEcmpRouteNextHopRMod | read-only | current | Next-hop address if the ingress port is on a R-Mod card. |
| 1.3.6.1.4.1.2272.1.8.107 | TablercIPClearArpRecordTable | not-accessible | current | Table used to clear an IP ARP Record. |
| 1.3.6.1.4.1.2272.1.8.107.1 | RowrcIPClearArpRecordEntry | not-accessible | current | IP Clear ARP Record Table Entry |
| 1.3.6.1.4.1.2272.1.8.107.1.1 | ColumnrcIPClearArpRecordIpAddr | not-accessible | current | IP Address that needs to be cleared. |
| 1.3.6.1.4.1.2272.1.8.107.1.2 | ColumnrcIPClearArpRecordVlanId | not-accessible | current | Vlan Id where the ARP record has to be cleared. |
| 1.3.6.1.4.1.2272.1.8.107.1.3 | ColumnrcIPClearArpRecordLCForceDelete | read-write | current | By default, when LCForceDelete (Line Card Force Delete) is set to false, if the ARP record is not found on the CP, then no message will be sent to the line-car… |
| 1.3.6.1.4.1.2272.1.8.108 | TablercIPClearIPMCRecordTable | not-accessible | current | Table used to clear an IP MC Record. |
| 1.3.6.1.4.1.2272.1.8.108.1 | RowrcIPClearIPMCRecordEntry | not-accessible | current | IP Clear IP MC Record Table Entry |
| 1.3.6.1.4.1.2272.1.8.108.1.1 | ColumnrcIPClearIPMCRecordGroup | not-accessible | current | The IP Multicast Group Address. |
| 1.3.6.1.4.1.2272.1.8.108.1.2 | ColumnrcIPClearIPMCRecordVlanId | not-accessible | current | Vlan Id where the IP MC record has to be cleared. |
| 1.3.6.1.4.1.2272.1.8.108.1.3 | ColumnrcIPClearIPMCRecordSource | read-write | current | The Source IP Address. |
| 1.3.6.1.4.1.2272.1.8.108.1.4 | ColumnrcIPClearIPMCRecordLCForceDelete | read-write | current | By default, when LCForceDelete (Line Card Force Delete) is set to false, if the IP MC record is not found on the CP, then no message will be sent to the line-c… |
| 1.3.6.1.4.1.2272.1.8.109 | NodercIpMulticastSquareSmlt | |||
| 1.3.6.1.4.1.2272.1.8.109.1 | ScalarrcIpMulticastSquareSmltEnable | read-write | current | Enable/Disable multicast Square Smlt. |
| 1.3.6.1.4.1.2272.1.8.110 | NodercIpIsis | |||
| 1.3.6.1.4.1.2272.1.8.110.1 | NodercIpIsisGenInFilter | |||
| 1.3.6.1.4.1.2272.1.8.110.1.1 | ScalarrcIpIsisInFilterNickNameTableSize | read-only | current | Ip Isis In Filter Nick Name table size |
| 1.3.6.1.4.1.2272.1.8.110.1.2 | ScalarrcIpIsisInFilterIsidTableSize | read-only | current | Ip Isis In Filter Isid table size |
| 1.3.6.1.4.1.2272.1.8.110.1.3 | ScalarrcIpIsisInFilterNickNameIsidTableSize | read-only | current | Ip Isis In Filter Nick Name Isid table size |
| 1.3.6.1.4.1.2272.1.8.110.1.4 | ScalarrcIpIsisInFilterIsidListTableSize | read-only | current | Ip Isis In Filter Isid List table size |
| 1.3.6.1.4.1.2272.1.8.110.1.5 | ScalarrcIpIsisInFilterNickNameIsidListTableSize | read-only | current | Ip Isis In Filter Nick Name Isid List table size |
| 1.3.6.1.4.1.2272.1.8.110.1.6 | ScalarrcIpIsisInFilterApply | read-write | current | Used to Apply the Ip Isis Accept filters. When the value is set to apply, all the elements in the in the various Ip Isis In Filter Tables will be applied as we… |
| 1.3.6.1.4.1.2272.1.8.110.2 | NodercIpIsisInFilter | |||
| 1.3.6.1.4.1.2272.1.8.110.2.1 | TablercIpIsisInFilterNickNameTable | not-accessible | current | IP Isis In Filter Nick Name table |
| 1.3.6.1.4.1.2272.1.8.110.2.1.1 | RowrcIpIsisInFilterNickNameEntry | not-accessible | current | An entry of Ip Isis In Filter Nick Name Table. |
| 1.3.6.1.4.1.2272.1.8.110.2.1.1.1 | ColumnrcIpIsisInFilterNickNameAdvertisingRtr | not-accessible | current | NickName used to filter by |
| 1.3.6.1.4.1.2272.1.8.110.2.1.1.2 | ColumnrcIpIsisInFilterNickNameEnable | read-create | current | Enables or disables the NickName entry. The value must be enabled to filter. |
| 1.3.6.1.4.1.2272.1.8.110.2.1.1.3 | ColumnrcIpIsisInFilterNickNamePolicyName | read-create | current | Route Map name used |
| 1.3.6.1.4.1.2272.1.8.110.2.1.1.4 | ColumnrcIpIsisInFilterNickNameRowStatus | read-create | current | Ip Isis In Filter Nick Name Table Row Status |
| 1.3.6.1.4.1.2272.1.8.110.2.1.1.5 | ColumnrcIpIsisInFilterNickNameBackBonePolicyName | read-create | current | Backbone Route Map name |
| 1.3.6.1.4.1.2272.1.8.110.2.2 | TablercIpIsisInFilterIsidTable | not-accessible | current | IP Isis In Filter Isid Isid table |
| 1.3.6.1.4.1.2272.1.8.110.2.2.1 | RowrcIpIsisInFilterIsidEntry | not-accessible | current | An entry of Ip Isis In Filter Table. |
| 1.3.6.1.4.1.2272.1.8.110.2.2.1.1 | ColumnrcIpIsisInFilterIsid | not-accessible | current | Isid value used to filter by. The value 0 is used for Global Router. |
| 1.3.6.1.4.1.2272.1.8.110.2.2.1.2 | ColumnrcIpIsisInFilterIsidEnable | read-create | current | Enables or disables the Isid entry. The value must be enabled to filter. |
| 1.3.6.1.4.1.2272.1.8.110.2.2.1.3 | ColumnrcIpIsisInFilterIsidPolicyName | read-create | current | Route Map name used |
| 1.3.6.1.4.1.2272.1.8.110.2.2.1.4 | ColumnrcIpIsisInFilterIsidRowStatus | read-create | current | Ip Isis In Filter Isid Table Row Status |
| 1.3.6.1.4.1.2272.1.8.110.2.2.1.5 | ColumnrcIpIsisInFilterIsidBackbonePolicyName | read-create | current | Backbone Route Map name |
| 1.3.6.1.4.1.2272.1.8.110.2.3 | TablercIpIsisInFilterNickNameIsidTable | not-accessible | current | IP Isis In Filter Nick Name Isid table |
| 1.3.6.1.4.1.2272.1.8.110.2.3.1 | RowrcIpIsisInFilterNickNameIsidEntry | not-accessible | current | An entry of Ip Isis In Filter Nick Name Isid Table. |
| 1.3.6.1.4.1.2272.1.8.110.2.3.1.1 | ColumnrcIpIsisInFilterNickNameIsidAdvertisingRtr | not-accessible | current | NickName used to filter by |
| 1.3.6.1.4.1.2272.1.8.110.2.3.1.2 | ColumnrcIpIsisInFilterNickNameIsid | not-accessible | current | Isid used to filter by. The value 0 is used for Global Router. |
| 1.3.6.1.4.1.2272.1.8.110.2.3.1.3 | ColumnrcIpIsisInFilterNickNameIsidEnable | read-create | current | |
| 1.3.6.1.4.1.2272.1.8.110.2.3.1.4 | ColumnrcIpIsisInFilterNickNameIsidPolicyName | read-create | current | Route Map name used |
| 1.3.6.1.4.1.2272.1.8.110.2.3.1.5 | ColumnrcIpIsisInFilterNickNameIsidRowStatus | read-create | current | Ip Isis In Filter Nick Name Isid Table Row Status |
| 1.3.6.1.4.1.2272.1.8.110.2.3.1.6 | ColumnrcIpIsisInFilterNickNameIsidBackBonePolicyName | read-create | current | Backbone Route Map name |
| 1.3.6.1.4.1.2272.1.8.110.2.4 | TablercIpIsisIsidListTable | not-accessible | current | IP Isis Isid List table |
| 1.3.6.1.4.1.2272.1.8.110.2.4.1 | RowrcIpIsisIsidListEntry | not-accessible | current | An entry of Ip Isis Isid List Table. |
| 1.3.6.1.4.1.2272.1.8.110.2.4.1.1 | ColumnrcIpIsisIsidListName | not-accessible | current | Name of Isid List |
| 1.3.6.1.4.1.2272.1.8.110.2.4.1.2 | ColumnrcIpIsisIsidListIsid | not-accessible | current | Is a member of the specified isid list. The value is the i-sid integer value or the value 0 is used for Global Router. |
| 1.3.6.1.4.1.2272.1.8.110.2.4.1.3 | ColumnrcIpIsisIsidListRowStatus | read-create | current | Row Status |
| 1.3.6.1.4.1.2272.1.8.110.2.5 | TablercIpIsisInFilterIsidListTable | not-accessible | current | IP Isis In Filter Isid List table |
| 1.3.6.1.4.1.2272.1.8.110.2.5.1 | RowrcIpIsisInFilterIsidListEntry | not-accessible | current | An entry of Ip Isis In Filter Table. |
| 1.3.6.1.4.1.2272.1.8.110.2.5.1.1 | ColumnrcIpIsisInFilterIsidListName | not-accessible | current | Name of Isid List |
| 1.3.6.1.4.1.2272.1.8.110.2.5.1.2 | ColumnrcIpIsisInFilterIsidListEnable | read-create | current | Enables or disables the Isid List entry. The value must be enabled to filter. |
| 1.3.6.1.4.1.2272.1.8.110.2.5.1.3 | ColumnrcIpIsisInFilterIsidListPolicyName | read-create | current | Route Map name |
| 1.3.6.1.4.1.2272.1.8.110.2.5.1.4 | ColumnrcIpIsisInFilterIsidListRowStatus | read-create | current | Ip Isis In Filter Isid List Table Row Status |
| 1.3.6.1.4.1.2272.1.8.110.2.5.1.5 | ColumnrcIpIsisInFilterIsidListBackBonePolicyName | read-create | current | Backbone Route Map name |
| 1.3.6.1.4.1.2272.1.8.110.2.6 | TablercIpIsisInFilterNickNameIsidListTable | not-accessible | current | IP Isis In Filter Nick Name Isid List table |
| 1.3.6.1.4.1.2272.1.8.110.2.6.1 | RowrcIpIsisInFilterNickNameIsidListEntry | not-accessible | current | An entry of Ip Isis In Filter Nick Name Isid ListTable |
| 1.3.6.1.4.1.2272.1.8.110.2.6.1.1 | ColumnrcIpIsisInFilterNickNameIsidListAdvertisingRtr | not-accessible | current | NickName used to filter by |
| 1.3.6.1.4.1.2272.1.8.110.2.6.1.2 | ColumnrcIpIsisInFilterNickNameIsidListName | not-accessible | current | Name of Isid List used to filter |
| 1.3.6.1.4.1.2272.1.8.110.2.6.1.3 | ColumnrcIpIsisInFilterNickNameIsidListEnable | read-create | current | Enables or disables the NickName IsidList entry. The value must be enabled to filter. |
| 1.3.6.1.4.1.2272.1.8.110.2.6.1.4 | ColumnrcIpIsisInFilterNickNameIsidListPolicyName | read-create | current | Route Map name |
| 1.3.6.1.4.1.2272.1.8.110.2.6.1.5 | ColumnrcIpIsisInFilterNickNameIsidListRowStatus | read-create | current | Ip Isis In Filter Nick Name Isid List Table Row Status |
| 1.3.6.1.4.1.2272.1.8.110.2.6.1.6 | ColumnrcIpIsisInFilterNickNameIsidListBackBonePolicyName | read-create | current | Backbone Route Map name |
| 1.3.6.1.4.1.2272.1.8.110.2.7 | NodercIpIsisInFilterDefault | |||
| 1.3.6.1.4.1.2272.1.8.110.2.7.1 | ScalarrcIpIsisInFilterDefaultPolicyName | read-write | current | Route Map name for the default filter |
| 1.3.6.1.4.1.2272.1.8.110.2.7.2 | ScalarrcIpIsisInFilterDefaultBackbonePolicyName | read-write | current | Backbone Route Map name for the default filter |
| 1.3.6.1.4.1.2272.1.8.111 | NodercIpIpmcPimStaleSessionDelete | |||
| 1.3.6.1.4.1.2272.1.8.111.1 | ScalarrcIpIpmcPimStaleSessionDeleteEnable | read-write | current | Enable/Disable PIM ipmc stale session delete feature |
| 1.3.6.1.4.1.2272.1.8.112 | NodercIpv6Pim | |||
| 1.3.6.1.4.1.2272.1.8.112.1 | NodercIpv6PimObjects | |||
| 1.3.6.1.4.1.2272.1.8.112.1.1 | NodercIpv6PimGlobal | |||
| 1.3.6.1.4.1.2272.1.8.112.1.1.1 | ScalarrcIpv6PimGlobalEnable | read-write | current | Enable/Disable PIM globally |
| 1.3.6.1.4.1.2272.1.8.112.1.1.2 | ScalarrcIpv6PimGlobalMode | read-write | current | Set PIM global mode to sparse or source specific |
| 1.3.6.1.4.1.2272.1.8.112.1.1.4 | ScalarrcIpv6PimGlobalRegisterSuppTimer | read-write | current | Each source's DR maintains, per (S,G), a Register-Suppression-timer in seconds. The Register-Suppression-timer is started by the Register-Stop message; upon ex… |
| 1.3.6.1.4.1.2272.1.8.112.1.1.6 | ScalarrcIpv6PimGlobalUniRouteChgTimeOut | read-write | current | This timer allows a better tuning on how fast the routing information is going to get updated from RTM (the frequency at which the RTM is polled for routing in… |
| 1.3.6.1.4.1.2272.1.8.112.1.1.7 | ScalarrcIpv6PimGlobalDiscardDataTimeOut | read-write | current | This timer is used to discard data until the Join is received from the RP. A ipmc discard record is created and deleted once the timer expires and/or when a Jo… |
| 1.3.6.1.4.1.2272.1.8.112.1.1.10 | ScalarrcIpv6PimGlobalStaticRP | read-write | current | Enable/Disable Static RP feature. |
| 1.3.6.1.4.1.2272.1.8.112.1.1.12 | ScalarrcIpv6PimGlobalFwdCacheTimeOut | read-write | current | PIM forward cache expiry value in seconds.This value is going to be used in aging PIM mroutes in seconds. |
| 1.3.6.1.4.1.2272.1.8.112.1.2 | TablercIpv6PimTable | not-accessible | current | IPv6 PIM table |
| 1.3.6.1.4.1.2272.1.8.112.1.2.1 | RowrcIpv6PimEntry | not-accessible | current | An entry of IPv6 PIM Table. |
| 1.3.6.1.4.1.2272.1.8.112.1.2.1.1 | ColumnrcIpv6PimIfIndex | not-accessible | current | The value of ifIndex for the interface on which IPv6 PIM is set |
| 1.3.6.1.4.1.2272.1.8.112.1.2.1.2 | ColumnrcIpv6PimEnable | read-write | current | Enable/Disable PIM on interface |
| 1.3.6.1.4.1.2272.1.8.112.1.2.1.3 | ColumnrcIpv6PimMode | read-write | current | Set PIM interface mode to sparse or source specific |
| 1.3.6.1.4.1.2272.1.8.112.1.2.1.4 | ColumnrcIpv6PimHelloInterval | read-write | current | The frequency at which PIM Hello messages are transmitted on this interface. |
| 1.3.6.1.4.1.2272.1.8.112.1.2.1.5 | ColumnrcIpv6PimJoinPruneInterval | read-write | current | The frequency at which PIM Join/Prune messages are transmitted on this PIM interface. |
| 1.3.6.1.4.1.2272.1.8.112.1.2.1.7 | ColumnrcIpv6PimIntfType | read-write | current | PIM interface type. |
| 1.3.6.1.4.1.2272.1.8.112.1.3 | TablercIpv6PimInterfaceTable | not-accessible | current | IPv6 PIM Interface table |
| 1.3.6.1.4.1.2272.1.8.112.1.3.1 | RowrcIpv6PimInterfaceEntry | not-accessible | current | An entry of IPv6 PIM Interface Table. |
| 1.3.6.1.4.1.2272.1.8.112.1.3.1.1 | ColumnrcIpv6PimInterfaceIfIndex | not-accessible | current | The value of ifIndex for the interface on which IPv6 PIM is set |
| 1.3.6.1.4.1.2272.1.8.112.1.3.1.2 | ColumnrcIpv6PimInterfaceOperState | read-only | current | The current operational state of this PIM interface. |
| 1.3.6.1.4.1.2272.1.8.112.1.3.1.3 | ColumnrcIpv6PimInterfaceType | read-write | current | PIM interface type. |
| 1.3.6.1.4.1.2272.1.8.112.1.4 | TablercIpv6PimStaticRPTable | not-accessible | current | The table lists all the RPs configured statically for various IPv6 multicast groups. |
| 1.3.6.1.4.1.2272.1.8.112.1.4.1 | RowrcIpv6PimStaticRPEntry | not-accessible | current | An entry (conceptual row) in the rcIpv6PimStaticRPTable. |
| 1.3.6.1.4.1.2272.1.8.112.1.4.1.1 | ColumnrcIpv6PimStaticRPGroupAddress | not-accessible | current | The IPv6 multicast group address which, when combined with rcIpv6PimStaticRPGroupMask, identifies a group prefix for which rcIpv6PimStaticRPAddress is a static… |
| 1.3.6.1.4.1.2272.1.8.112.1.4.1.2 | ColumnrcIpv6PimStaticRPGroupMask | not-accessible | current | The multicast group address mask which, when combined with rcIpv6PimStaticRPGroupAddress, identifies a group prefix for which rcIpv6PimStaticRPAddress is a sta… |
| 1.3.6.1.4.1.2272.1.8.112.1.4.1.3 | ColumnrcIpv6PimStaticRPAddress | not-accessible | current | The (unicast) address of the static-RP. |
| 1.3.6.1.4.1.2272.1.8.112.1.4.1.4 | ColumnrcIpv6PimStaticRPRowStatus | read-create | current | The status of this row, by which new entries may be created, or old entries deleted from this table. |
| 1.3.6.1.4.1.2272.1.8.112.1.4.1.5 | ColumnrcIpv6PimStaticRPStatus | read-only | current | The status of StaticRP. |
| 1.3.6.1.4.1.2272.1.8.112.1.7 | TablercIpv6PimActiveRPTable | not-accessible | current | The table lists the RPs being used for the active IP multicast groups. |
| 1.3.6.1.4.1.2272.1.8.112.1.7.1 | RowrcIpv6PimActiveRPEntry | not-accessible | current | An entry in the rcIpv6PimActiveRPTable. |
| 1.3.6.1.4.1.2272.1.8.112.1.7.1.1 | ColumnrcIpv6PimActiveRPGroupAddress | not-accessible | current | The active IPv6 multicast group address. |
| 1.3.6.1.4.1.2272.1.8.112.1.7.1.2 | ColumnrcIpv6PimActiveRPAddress | read-only | current | The address of the RP for the active multicast group. |
| 1.3.6.1.4.1.2272.1.8.112.1.7.1.3 | ColumnrcIpv6PimActiveRPPriority | read-only | current | The priority of the RP. |
| 1.3.6.1.4.1.2272.1.8.114 | NodercIpSpbPimGw | |||
| 1.3.6.1.4.1.2272.1.8.114.1 | NodercIpSpbPimGwGlobal | |||
| 1.3.6.1.4.1.2272.1.8.114.1.1 | ScalarrcIpSpbPimGwGlobalHelloInterval | read-only | current | PIM Gateway Hello transmission interval in seconds. The PI Gateway VLAN inherits this value. The Gateway VLAN Level setting will override this. |
| 1.3.6.1.4.1.2272.1.8.114.1.2 | ScalarrcIpSpbPimGwGlobalJoinPruneInterval | read-only | current | PIM Gateway Join/Prune transmission interval in seconds. The PIM Gateway VLAN inherits this value. The Gateway VLAN level setting will override this. |
| 1.3.6.1.4.1.2272.1.8.114.2 | TablercIpSpbPimGwInterfaceTable | not-accessible | current | IP PIM Gateway table |
| 1.3.6.1.4.1.2272.1.8.114.2.1 | RowrcIpSpbPimGwInterfaceEntry | not-accessible | current | An entry of Ip Pim Gateway Interface Table. |
| 1.3.6.1.4.1.2272.1.8.114.2.1.1 | ColumnrcIpSpbPimGwInterfaceIfIndex | not-accessible | current | port |
| 1.3.6.1.4.1.2272.1.8.114.2.1.2 | ColumnrcIpSpbPimGwInterfaceOperState | read-only | current | The current operational state of this PIM-gw interface. |
| 1.3.6.1.4.1.2272.1.8.114.2.1.3 | ColumnrcIpSpbPimGwInterfaceAddressType | read-only | current | The address type of this PIM-gw interface. |
| 1.3.6.1.4.1.2272.1.8.114.2.1.4 | ColumnrcIpSpbPimGwInterfaceAddress | read-only | current | The primary IP address of this router on this PIM-gw interface. The InetAddressType is given by the rcIpSpbPimGwInterfaceAddressType object. |
| 1.3.6.1.4.1.2272.1.8.114.2.1.5 | ColumnrcIpSpbPimGwInterfaceAddressMask | read-only | current | The primary IP address mask of this router on this PIM-gw interface. |
| 1.3.6.1.4.1.2272.1.8.114.2.1.6 | ColumnrcIpSpbPimGwInterfaceHelloInterval | read-write | current | PIM Hello transmission interval. This PIM Gateway VLAN level interval setting overrides the inherited Global PIM Gateway Hello Interval setting. Setting the He… |
| 1.3.6.1.4.1.2272.1.8.114.2.1.7 | ColumnrcIpSpbPimGwInterfaceJoinPruneInterval | read-write | current | PIM Join/Prune transmission interval. This PIM Gateway VLAN level interval setting overrides the inherited Global level Join/Prune transmission interval settin… |
| 1.3.6.1.4.1.2272.1.8.114.3 | TablercIpSpbPimGwNeighborTable | not-accessible | current | The PIM-gw neighbor Table |
| 1.3.6.1.4.1.2272.1.8.114.3.1 | RowrcIpSpbPimGwNeighborEntry | not-accessible | current | An entry (conceptual row) in the pimNeighborTable. |
| 1.3.6.1.4.1.2272.1.8.114.3.1.1 | ColumnrcIpSpbPimGwNeighborIfIndex | not-accessible | current | The value of ifIndex for the interface used to reach this PIM-gw neighbor. |
| 1.3.6.1.4.1.2272.1.8.114.3.1.2 | ColumnrcIpSpbPimGwNeighborAddressType | not-accessible | current | The address type of this PIM-gw neighbor. |
| 1.3.6.1.4.1.2272.1.8.114.3.1.3 | ColumnrcIpSpbPimGwNeighborAddress | not-accessible | current | The primary IP address of this PIM-gw neighbor. The InetAddressType is given by the rcIpSpbPimGwNeighborAddressType object. |
| 1.3.6.1.4.1.2272.1.8.114.3.1.4 | ColumnrcIpSpbPimGwNeighborUpTime | read-only | current | The time since this PIM-gw neighbor (last) became a neighbor of the local router. |
| 1.3.6.1.4.1.2272.1.8.114.3.1.5 | ColumnrcIpSpbPimGwNeighborExpiryTime | read-only | current | The minimum time remaining before this PIM-gw neighbor will time out. |
| 1.3.6.1.4.1.2272.1.8.114.4 | TablercIpSpbPimGwControllerForeignSrcTable | not-accessible | current | IP Multicast foreign source table from SPB PIM GW controller. This is table of IP multicast sources from non-SPBM domain. |
| 1.3.6.1.4.1.2272.1.8.114.4.1 | RowrcIpSpbPimGwControllerForeignSrcEntry | not-accessible | current | An entry of IP multicast foreign source. |
| 1.3.6.1.4.1.2272.1.8.114.4.1.1 | ColumnrcIpSpbPimGwControllerForeignSrcSourceAddress | not-accessible | current | The source IP address from non-SPBM multicast domain. |
| 1.3.6.1.4.1.2272.1.8.114.4.1.2 | ColumnrcIpSpbPimGwControllerForeignSrcGroupAddress | not-accessible | current | Multicast group IP address associated with the foreign source. |
| 1.3.6.1.4.1.2272.1.8.114.4.1.3 | ColumnrcIpSpbPimGwControllerForeignSrcRowStatus | read-create | current | Used to create/delete entries. |
| 1.3.6.1.4.1.2272.1.8.114.4.1.4 | ColumnrcIpSpbPimGwControllerForeignSrcGatewaySysId | read-only | current | System ID of the node selected as the gateway for this foreing source. This object has valid value if the source has a gateway assigned. If the source is not a… |
| 1.3.6.1.4.1.2272.1.8.114.4.1.5 | ColumnrcIpSpbPimGwControllerForeignSrcGatewayHostName | read-only | current | Host name of the node selected as the gateway for this foreign source. This object has valid value if the source has a gateway assigned. If the source is not a… |
| 1.3.6.1.4.1.2272.1.8.114.4.1.6 | ColumnrcIpSpbPimGwControllerForeignSrcType | read-only | current | The type of the owner of this source. |
| 1.3.6.1.4.1.2272.1.8.114.4.1.7 | ColumnrcIpSpbPimGwControllerForeignSrcOwner | read-only | current | The IP address of the MSDP peer if the foreign source type (rcIpSpbPimGwControllerForeignSrcType) is MSDP. |
| 1.3.6.1.4.1.2272.1.8.114.5 | TablercIpSpbPimGwControllerSpbmcSrcTable | not-accessible | current | SPB Multicast source table from SPB PIM GW controller. This is table for all SPBM sources distributed to MSDP. |
| 1.3.6.1.4.1.2272.1.8.114.5.1 | RowrcIpSpbPimGwControllerSpbmcSrcEntry | not-accessible | current | An entry of SPBMC source sent to MSDP. |
| 1.3.6.1.4.1.2272.1.8.114.5.1.1 | ColumnrcIpSpbPimGwControllerSpbmcSrcSourceAddress | not-accessible | current | The source IP address from SPBM multicast domain. |
| 1.3.6.1.4.1.2272.1.8.114.5.1.2 | ColumnrcIpSpbPimGwControllerSpbmcSrcGroupAddress | not-accessible | current | Multicast group IP address associated with the SPBMC source. |
| 1.3.6.1.4.1.2272.1.8.114.5.1.3 | ColumnrcIpSpbPimGwControllerSpbmcSrcOriginatorSysId | read-only | current | System ID of the node to which the source is attached to. |
| 1.3.6.1.4.1.2272.1.8.114.5.1.4 | ColumnrcIpSpbPimGwControllerSpbmcSrcOriginatorHostName | read-only | current | Host name of the node to which the source is attached to. |
| 1.3.6.1.4.1.2272.1.8.114.6 | TablercIpSpbPimGwGatewayForeignSrcTable | not-accessible | current | IP Multicast foreign source table from SPB PIM GW gateway. |
| 1.3.6.1.4.1.2272.1.8.114.6.1 | RowrcIpSpbPimGwGatewayForeignSrcEntry | not-accessible | current | An entry of IP multicast foreign source. |
| 1.3.6.1.4.1.2272.1.8.114.6.1.1 | ColumnrcIpSpbPimGwGatewayForeignSrcSourceAddress | not-accessible | current | The source IP address foreign source entry. |
| 1.3.6.1.4.1.2272.1.8.114.6.1.2 | ColumnrcIpSpbPimGwGatewayForeignSrcGroupAddress | not-accessible | current | Multicast group IP address associated with the foreign source. |
| 1.3.6.1.4.1.2272.1.8.114.6.1.3 | ColumnrcIpSpbPimGwGatewayForeignSrcControllerSysId | not-accessible | current | System ID of the controller node (preferred controller) that sent this foreing source. |
| 1.3.6.1.4.1.2272.1.8.114.6.1.4 | ColumnrcIpSpbPimGwGatewayForeignSrcControllerHostName | read-only | current | Host name of the controller node that sent this foreign source. |
| 1.3.6.1.4.1.2272.1.8.114.6.1.5 | ColumnrcIpSpbPimGwGatewayForeignSrcGatewaySysId | read-only | current | System ID of the node selected as the gateway for this foreing source. |
| 1.3.6.1.4.1.2272.1.8.114.6.1.6 | ColumnrcIpSpbPimGwGatewayForeignSrcGatewayHostName | read-only | current | Host name of the node selected as the gateway for this foreign source. |
| 1.3.6.1.4.1.2272.1.8.114.6.1.7 | ColumnrcIpSpbPimGwGatewayForeignSrcInVid | read-only | current | The VLAN id of the PimGw interface through which the source of this source is reachable. |
| 1.3.6.1.4.1.2272.1.8.114.6.1.8 | ColumnrcIpSpbPimGwGatewayForeignSrcInPort | read-only | current | An unique value to identify a physical interface through which the source of this source is reachable. |
| 1.3.6.1.4.1.2272.1.8.114.6.1.9 | ColumnrcIpSpbPimGwGatewayForeignSrcOwnerType | read-only | current | msdp - if the owner is MSDP; static - otherwise |
| 1.3.6.1.4.1.2272.1.8.114.7 | TablercIpSpbPimGwNodeTable | not-accessible | current | The PIM-gw node Table |
| 1.3.6.1.4.1.2272.1.8.114.7.1 | RowrcIpSpbPimGwNodeEntry | not-accessible | current | An entry (conceptual row) in the pimNodeTable. |
| 1.3.6.1.4.1.2272.1.8.114.7.1.1 | ColumnrcIpSpbPimGwNodeMacAddress | not-accessible | current | The Max Address of the active node. |
| 1.3.6.1.4.1.2272.1.8.114.7.1.2 | ColumnrcIpSpbPimGwNodeHostName | read-only | current | The Host name of the active node. |
| 1.3.6.1.4.1.2272.1.8.114.7.1.3 | ColumnrcIpSpbPimGwNodeRoleType | read-only | current | The role type of the node. It is either Gateway, Controller or both. |
| 1.3.6.1.4.1.2272.1.8.115 | NodercMRouteExt | |||
| 1.3.6.1.4.1.2272.1.8.115.1 | TablercMRouteExtTable | not-accessible | current | The (conceptual) table containing multicast routing information for IP datagrams sent by particular sources to the IP multicast groups known to this router. |
| 1.3.6.1.4.1.2272.1.8.115.1.1 | RowrcMRouteExtEntry | not-accessible | current | An entry (conceptual row) containing the multicast routing information for IP datagrams from a particular source and addressed to a particular IP multicast gro… |
| 1.3.6.1.4.1.2272.1.8.115.1.1.1 | ColumnrcMRouteExtProtocol | read-only | current | The routing mechanism via which this route was learned. |
| 1.3.6.1.4.1.2272.1.8.115.2 | TablercMRouteExtNextHopTable | not-accessible | current | The (conceptual) table containing information on the next hops on outgoing interfaces for routing IP multicast datagrams. Each entry is one of a list of next h… |
| 1.3.6.1.4.1.2272.1.8.115.2.1 | RowrcMRouteExtNextHopEntry | not-accessible | current | An entry (conceptual row) in the list of next hops on outgoing interfaces to which IP multicast datagrams from particular sources to a IP multicast group addre… |
| 1.3.6.1.4.1.2272.1.8.115.2.1.1 | ColumnrcMRouteExtNextHopProtocol | read-only | current | The routing mechanism via which this next-hop was learned. |
| 1.3.6.1.4.1.2272.1.8.115.2.1.2 | ColumnrcMRouteExtNextHopL2Isid | read-only | current | L2 ISID of the cvlan. |
| 1.3.6.1.4.1.2272.1.8.115.3 | TablercMRouteExtInterfaceTable | not-accessible | current | The (conceptual) table containg multicast routing information specific to interfaces. |
| 1.3.6.1.4.1.2272.1.8.115.3.1 | RowrcMRouteExtInterfaceEntry | not-accessible | current | An entry (conceptual row) containing the multicast routing information for a particular interface. |
| 1.3.6.1.4.1.2272.1.8.115.3.1.1 | ColumnrcMRouteExtInterfaceProtocol | read-only | current | The routing protocol running on this interface. |
| 1.3.6.1.4.1.2272.1.8.115.4 | TablercMRouteExtNextHopPortTable | not-accessible | current | The (conceptual) table containing information on the next hops on outgoing interfaces for routing IP multicast datagrams. Each entry is one of a list of next h… |
| 1.3.6.1.4.1.2272.1.8.115.4.1 | RowrcMRouteExtNextHopPortEntry | not-accessible | current | An entry (conceptual row) in the list of next hops on outgoing interfaces to which IP multicast datagrams from particular sources to a IP multicast group addre… |
| 1.3.6.1.4.1.2272.1.8.115.4.1.1 | ColumnrcMRouteExtNextHopPortGroup | not-accessible | current | The IP multicast group for which this entry specifies a next hop on an outgoing interface. |
| 1.3.6.1.4.1.2272.1.8.115.4.1.2 | ColumnrcMRouteExtNextHopPortSource | not-accessible | current | The network address which when combined with the corresponding value of ipMRouteNextHopSourceMask identifies the sources for which this entry specifies a next … |
| 1.3.6.1.4.1.2272.1.8.115.4.1.3 | ColumnrcMRouteExtNextHopPortSourceMask | not-accessible | current | The network mask which when combined with the corresponding value of ipMRouteNextHopSource identifies the sources for which this entry specifies a next hop on … |
| 1.3.6.1.4.1.2272.1.8.115.4.1.4 | ColumnrcMRouteExtNextHopPortIfIndex | not-accessible | current | The ifIndex value of the interface for the outgoing interface for this next hop. |
| 1.3.6.1.4.1.2272.1.8.115.4.1.5 | ColumnrcMRouteExtNextHopPortReceiverPort | not-accessible | current | The port number where the receiver exists for this next hop. |
| 1.3.6.1.4.1.2272.1.8.115.4.1.6 | ColumnrcMRouteExtNextHopPortAddress | not-accessible | current | The address of the next hop specific to this entry. For most interfaces, this is identical to ipMRouteNextHopGroup. NBMA interfaces, however, may have multiple… |
| 1.3.6.1.4.1.2272.1.8.115.4.1.7 | ColumnrcMRouteExtNextHopPortState | read-only | current | An indication of whether the outgoing interface and next hop represented by this entry is currently being used to forward IP datagrams. The value 'forwarding' … |
| 1.3.6.1.4.1.2272.1.8.115.4.1.8 | ColumnrcMRouteExtNextHopPortUpTime | read-only | current | The time since the multicast routing information represented by this entry was learned by the router. |
| 1.3.6.1.4.1.2272.1.8.115.4.1.9 | ColumnrcMRouteExtNextHopPortExpiryTime | read-only | current | The minimum amount of time remaining before this entry will be aged out. The value 0 indicates that the entry is not subject to aging. |
| 1.3.6.1.4.1.2272.1.8.115.4.1.10 | ColumnrcMRouteExtNextHopPortClosestMemberHops | read-only | current | The minimum number of hops between this router and any member of this IP multicast group reached via this next hop on this outgoing interface. Any IP multicast… |
| 1.3.6.1.4.1.2272.1.8.115.4.1.11 | ColumnrcMRouteExtNextHopPortProtocol | read-only | current | The routing mechanism via which this next-hop was learned. |
| 1.3.6.1.4.1.2272.1.8.115.4.1.12 | ColumnrcMRouteExtNextHopPortPkts | read-only | current | The number of packets which have been forwarded using this route. |
| 1.3.6.1.4.1.2272.1.9 | NodercArp | |||
| 1.3.6.1.4.1.2272.1.9.1 | ScalarrcArpExtLifeTime | read-write | current | The lifetime in minutues of an ARP entry within the system. |
| 1.3.6.1.4.1.2272.1.9.2 | TablercArpExtTable | not-accessible | current | ARP extension table. This table augments the standard ipNetToMediaTable defined in RFC1213. |
| 1.3.6.1.4.1.2272.1.9.2.1 | RowrcArpExtEntry | not-accessible | current | Entry containing Proprietary ARP information. An entry is automatically created in this table when an ip address is configured on an interface. |
| 1.3.6.1.4.1.2272.1.9.2.1.1 | ColumnrcArpExtEntIfIndex | read-only | current | The index value which uniquely identifies the interface to which this entry is applicable. The interface identified by a particular value of this index is the … |
| 1.3.6.1.4.1.2272.1.9.2.1.2 | ColumnrcArpExtEntDoProxy | read-write | current | Enable or disable ARP proxy responses on the specified interface. |
| 1.3.6.1.4.1.2272.1.9.2.1.3 | ColumnrcArpExtEntDoResp | read-write | current | Enable or disable the sending of ARP responses on the specified interface. |
| 1.3.6.1.4.1.2272.1.9.2.1.4 | ColumnrcArpExtEntDoFlood | read-write | current | Enable or disable flooding of ARP responses for NLBS Virtual Mac on the specified interface. |
| 1.3.6.1.4.1.2272.1.9.2.1.5 | ColumnrcArpExtEntForcedRearp | read-write | current | Enable or disable the activity check on ARP entries with respect to aging on the specified interface. When enabled and the timer expires, the ARP entry is remo… |
| 1.3.6.1.4.1.2272.1.9.3 | TablercArpExtV2Table | not-accessible | obsolete | ARP extension table. This table augments the standard ipNetToMediaTable defined in RFC1213. |
| 1.3.6.1.4.1.2272.1.9.3.1 | RowrcArpExtV2Entry | not-accessible | obsolete | Entry containing Proprietary ARP information. An entry is automatically created in this table when an ip address is configured on an interface. |
| 1.3.6.1.4.1.2272.1.9.3.1.1 | ColumnrcArpExtV2EntIfIndex | read-only | obsolete | The index value which uniquely identifies the interface to which this entry is applicable. The interface identified by a particular value of this index is the … |
| 1.3.6.1.4.1.2272.1.9.3.1.2 | ColumnrcArpExtV2EntIpIfAddr | read-only | obsolete | Ip Address |
| 1.3.6.1.4.1.2272.1.9.3.1.3 | ColumnrcArpExtV2EntDoProxy | read-write | obsolete | Enable or disable ARP proxy responses on the specified interface. |
| 1.3.6.1.4.1.2272.1.9.3.1.4 | ColumnrcArpExtV2EntDoResp | read-write | obsolete | Enable or disable the sending of ARP responses on the specified interface. |
| 1.3.6.1.4.1.2272.1.9.4 | ScalarrcArpExtMulticastMacFlooding | read-write | current | Enable/Disable Multicast Mac Flooding Mode |
| 1.3.6.1.4.1.2272.1.10 | NodercRip | |||
| 1.3.6.1.4.1.2272.1.10.1 | ScalarrcRipExtOperation | read-write | current | Enable or disable the operation of RIP on all Interfaces. |
| 1.3.6.1.4.1.2272.1.10.2 | ScalarrcRipExtUpdateTime | read-write | current | The time between transmission of RIP updates on all interfaces. |
| 1.3.6.1.4.1.2272.1.10.3 | TablercRipExtTable | not-accessible | current | RIP extension table. This table augments the standard IfConfTable table in RFC1389. |
| 1.3.6.1.4.1.2272.1.10.3.1 | RowrcRipExtEntry | not-accessible | current | Entry containing Proprietary RIP information. An entry is automatically created in this table when an ip address is configured on an interface. |
| 1.3.6.1.4.1.2272.1.10.3.1.1 | ColumnrcRipExtEntIfIndex | read-only | current | The index value which uniquely identifies the interface to which this entry is applicable. The interface identified by a particular value of this index is the … |
| 1.3.6.1.4.1.2272.1.10.3.1.2 | ColumnrcRipExtEntTalk | read-write | current | Enable or disable RIP transmission on the specified interface. |
| 1.3.6.1.4.1.2272.1.10.3.1.3 | ColumnrcRipExtEntListen | read-write | current | Enable or disable RIP reception on the specified interface. |
| 1.3.6.1.4.1.2272.1.10.3.1.4 | ColumnrcRipExtEntPoison | read-write | current | Enable or disable operation of poison reverse on the specified interface. If poison is disabled, split-horizon operation is enabled. |
| 1.3.6.1.4.1.2272.1.10.4 | TablercRipExtV2Table | not-accessible | obsolete | RIP extension table. This table augments the standard IfConfTable table in RFC1389. |
| 1.3.6.1.4.1.2272.1.10.4.1 | RowrcRipExtV2Entry | not-accessible | obsolete | Entry containing Proprietary RIP information. An entry is automatically created in this table when an ip address is configured on an interface. |
| 1.3.6.1.4.1.2272.1.10.4.1.1 | ColumnrcRipExtV2EntIfIndex | read-only | obsolete | The index value which uniquely identifies the interface to which this entry is applicable. The interface identified by a particular value of this index is the … |
| 1.3.6.1.4.1.2272.1.10.4.1.2 | ColumnrcRipExtV2EntIpIfAddr | read-only | obsolete | Ip Address. |
| 1.3.6.1.4.1.2272.1.10.4.1.3 | ColumnrcRipExtV2EntTalk | read-write | obsolete | Enable or disable RIP transmission on the specified interface. |
| 1.3.6.1.4.1.2272.1.10.4.1.4 | ColumnrcRipExtV2EntListen | read-write | obsolete | Enable or disable RIP reception on the specified interface. |
| 1.3.6.1.4.1.2272.1.10.4.1.5 | ColumnrcRipExtV2EntPoison | read-write | obsolete | Enable or disable operation of poison reverse on the specified interface. If poison is disabled, split-horizon operation is enabled. |
| 1.3.6.1.4.1.2272.1.10.5 | NodercRipng | |||
| 1.3.6.1.4.1.2272.1.10.5.1 | NodercRipngObjects | |||
| 1.3.6.1.4.1.2272.1.10.5.1.1 | NodercIpv6RipngGeneralGroup | |||
| 1.3.6.1.4.1.2272.1.10.5.1.1.1 | ScalarrcIpv6RipngAdminState | read-write | current | Enable or disable RIPng globally |
| 1.3.6.1.4.1.2272.1.10.5.1.1.2 | ScalarrcIpv6RipngUpdateTime | read-write | current | The time between transmission of RIPng updates. |
| 1.3.6.1.4.1.2272.1.10.5.1.1.3 | ScalarrcIpv6RipngGlobalHoldDownTime | read-write | current | Used to set the system-wide RIPng hold down time in seconds. |
| 1.3.6.1.4.1.2272.1.10.5.1.1.4 | ScalarrcIpv6RipngGlobalTimeOutInterval | read-write | current | Ripng TimeOut Interval in seconds |
| 1.3.6.1.4.1.2272.1.10.5.1.1.5 | ScalarrcIpv6RipngDefaultInfoMetric | read-write | current | Ripng default-information metric |
| 1.3.6.1.4.1.2272.1.10.5.1.1.6 | ScalarrcIpv6RipngDefaultInfoState | read-write | current | Default-information enable/disable at global level |
| 1.3.6.1.4.1.2272.1.10.5.1.1.7 | ScalarrcIpv6RipngDefaultImportMetric | read-only | current | Ripng default import metric |
| 1.3.6.1.4.1.2272.1.10.5.1.2 | TablercIpv6RipngInterfaceTable | not-accessible | current | IPv6 Ripng Interface table |
| 1.3.6.1.4.1.2272.1.10.5.1.2.1 | RowrcIpv6RipngInterfaceEntry | not-accessible | current | An entry of IPv6 Ripng Interface Table. |
| 1.3.6.1.4.1.2272.1.10.5.1.2.1.1 | ColumnrcIpv6RipngInterfaceIfIndex | not-accessible | current | Ripng Interface Index. |
| 1.3.6.1.4.1.2272.1.10.5.1.2.1.2 | ColumnrcIpv6RipngInterfaceRipAdminStatus | read-create | current | Enable/Disable RIPng on interface |
| 1.3.6.1.4.1.2272.1.10.5.1.2.1.3 | ColumnrcIpv6RipngInterfaceDefaultInfoState | read-create | current | Origante default route under the particular interface |
| 1.3.6.1.4.1.2272.1.10.5.1.2.1.4 | ColumnrcIpv6RipngInterfaceCost | read-create | current | Used to specify the cost of RIPng metric |
| 1.3.6.1.4.1.2272.1.10.5.1.2.1.5 | ColumnrcIpv6RipngInterfacePoison | read-create | current | Enable/Disable poison reverse on Ripng interface |
| 1.3.6.1.4.1.2272.1.10.5.1.2.1.6 | ColumnrcIpv6RipngInterfaceRipOperStatus | read-only | current | Enable/Disable RIPng Operational state on interface |
| 1.3.6.1.4.1.2272.1.10.5.1.2.1.7 | ColumnrcIpv6RipngInterfaceRowStatus | read-create | current | This variable controls the status of the en- try. |
| 1.3.6.1.4.1.2272.1.10.5.1.3 | TablercIpv6RipngIfStatsTable | not-accessible | current | A list of subnets which require separate status monitoring in RIPng. |
| 1.3.6.1.4.1.2272.1.10.5.1.3.1 | RowrcIpv6RipngIfStatsEntry | not-accessible | current | A Single Routing Domain in a single Subnet. |
| 1.3.6.1.4.1.2272.1.10.5.1.3.1.1 | ColumnrcIpv6RipngIfStatsIfIndex | not-accessible | current | The interface index of the RIPng interface. |
| 1.3.6.1.4.1.2272.1.10.5.1.3.1.2 | ColumnrcIpv6RipngIfStatsRcvBadPackets | read-only | current | The number of RIPng response packets received by the RIPng process which were subsequently dis- carded for any reason (e.g. a version 0 packet, or an unknown c… |
| 1.3.6.1.4.1.2272.1.10.5.1.3.1.3 | ColumnrcIpv6RipngIfStatsRcvBadRoutes | read-only | current | The number of routes, in valid RIPng packets, which were ignored for any reason (e.g. unknown address family, or invalid metric). |
| 1.3.6.1.4.1.2272.1.10.5.1.3.1.4 | ColumnrcIpv6RipngIfStatsSentUpdates | read-only | current | The number of triggered RIPng updates actually sent on this interface. This explicitly does NOT include full updates sent containing new information. |
| 1.3.6.1.4.1.2272.1.10.5.1.3.1.5 | ColumnrcIpv6RipngIfStatsRcvUpdates | read-only | current | The number of triggered RIPng updates actually receive on this interface. This explicitly does NOT include full updates received containing new information. |
| 1.3.6.1.4.1.2272.1.10.5.1.3.1.6 | ColumnrcIpv6RipngIfStatsClearStats | read-write | current | Clear stats for RIpng interface |
| 1.3.6.1.4.1.2272.1.11 | NodercTest | |||
| 1.3.6.1.4.1.2272.1.11.1 | TablercTestExtTable | not-accessible | current | Test extension table. This table augments the standard ifTestTable table in RFC1573. |
| 1.3.6.1.4.1.2272.1.11.1.1 | RowrcTestEntry | not-accessible | current | Proprietary test variables. |
| 1.3.6.1.4.1.2272.1.11.1.1.1 | ColumnrcTestExtIfIndex | read-only | current | The index value which uniquely identifies the interface to which this entry is applicable. The interface identified by a particular value of this index is the … |
| 1.3.6.1.4.1.2272.1.11.1.1.2 | ColumnrcTestExtPassCount | read-only | current | The number of iterations of the test case that completed successfully. |
| 1.3.6.1.4.1.2272.1.11.1.1.3 | ColumnrcTestExtFailCount | read-only | current | The number of iterations of the test case that failed. |
| 1.3.6.1.4.1.2272.1.11.2 | NodercTestTypes | |||
| 1.3.6.1.4.1.2272.1.11.2.1 | NodercTestTypesFabric | |||
| 1.3.6.1.4.1.2272.1.11.2.2 | NodercTestTypesArTable | |||
| 1.3.6.1.4.1.2272.1.11.2.3 | NodercTestTypesExtLoopBack | |||
| 1.3.6.1.4.1.2272.1.11.3 | NodercTestCodes | |||
| 1.3.6.1.4.1.2272.1.11.3.1 | NodercTestCodesNoReceive | |||
| 1.3.6.1.4.1.2272.1.11.3.2 | NodercTestCodesBadSeq | |||
| 1.3.6.1.4.1.2272.1.11.3.3 | NodercTestCodesBadLen | |||
| 1.3.6.1.4.1.2272.1.11.3.4 | NodercTestCodesBadData | |||
| 1.3.6.1.4.1.2272.1.12 | NodercStat | |||
| 1.3.6.1.4.1.2272.1.12.1 | TablercStatTable | not-accessible | current | A table used to store port statistics. |
| 1.3.6.1.4.1.2272.1.12.1.1 | RowrcStatEntry | not-accessible | current | interface counters |
| 1.3.6.1.4.1.2272.1.12.1.1.1 | ColumnrcStatPortIndex | read-only | current | An index value that uniquely identifies a port. This value is similar to ifIndex in MIB2. |
| 1.3.6.1.4.1.2272.1.12.1.1.2 | ColumnrcStatFrameTooShorts | read-only | current | The total number of frames that are too short that were encountered on this interface. |
| 1.3.6.1.4.1.2272.1.12.1.1.3 | ColumnrcStatBridgeInUnicastFrames | read-only | current | The total number of incoming unicast frames that were bridged. |
| 1.3.6.1.4.1.2272.1.12.1.1.4 | ColumnrcStatBridgeInMulticastFrames | read-only | current | The total number of incoming multicast frames that were bridged. |
| 1.3.6.1.4.1.2272.1.12.1.1.5 | ColumnrcStatBridgeInBroadcastFrames | read-only | current | The total number of incoming broadcast frames that were bridged. |
| 1.3.6.1.4.1.2272.1.12.1.1.6 | ColumnrcStatBridgeInDiscards | read-only | current | The total number of frames that were discarded by the bridging entity. |
| 1.3.6.1.4.1.2272.1.12.1.1.7 | ColumnrcStatBridgeOutUnicastFrames | read-only | current | The total number of outgoing unicast frames that were bridged. |
| 1.3.6.1.4.1.2272.1.12.1.1.8 | ColumnrcStatBridgeOutMulticastFrames | read-only | current | The total number of outgoing multicast frames that were bridged. |
| 1.3.6.1.4.1.2272.1.12.1.1.9 | ColumnrcStatBridgeOutBroadcastFrames | read-only | current | The total number of outgoing broadcast frames that were bridged. |
| 1.3.6.1.4.1.2272.1.12.1.1.10 | ColumnrcStatRouteInUnicastFrames | read-only | current | The total number of incoming unicast frames that were routed. |
| 1.3.6.1.4.1.2272.1.12.1.1.11 | ColumnrcStatRouteInMulticastFrames | read-only | current | The total number of incoming multicast frames that were routed. |
| 1.3.6.1.4.1.2272.1.12.1.1.12 | ColumnrcStatRouteInDiscards | read-only | current | The total number of frames that were discarded by the routing entity. |
| 1.3.6.1.4.1.2272.1.12.1.1.13 | ColumnrcStatRouteOutUnicastFrames | read-only | current | The total number of outgoing unicast frames that were routed. |
| 1.3.6.1.4.1.2272.1.12.1.1.14 | ColumnrcStatRouteOutMulticastFrames | read-only | current | The total number of outgoing multicast frames that were routed. |
| 1.3.6.1.4.1.2272.1.12.1.1.15 | ColumnrcStatStgForwardTransitions | read-only | current | The number of times this port has transitioned from the Learning state to the Forwarding state. |
| 1.3.6.1.4.1.2272.1.12.1.1.16 | ColumnrcStatStgInConfigBpdus | read-only | current | |
| 1.3.6.1.4.1.2272.1.12.1.1.17 | ColumnrcStatStgInTcnBpdus | read-only | current | |
| 1.3.6.1.4.1.2272.1.12.1.1.18 | ColumnrcStatStgInBadBpdus | read-only | current | |
| 1.3.6.1.4.1.2272.1.12.1.1.19 | ColumnrcStatStgOutConfigBpdus | read-only | current | |
| 1.3.6.1.4.1.2272.1.12.1.1.20 | ColumnrcStatStgOutTcnBpdus | read-only | current | |
| 1.3.6.1.4.1.2272.1.12.1.1.21 | ColumnrcStatBridgeOutFrames | read-only | current | Used by the Accelar 8000 product family to account for all transmitted bridge unicast, broadcast, and multicast packets. The individual counters are not suppor… |
| 1.3.6.1.4.1.2272.1.12.1.1.22 | ColumnrcStatPbtUnknownDropCount | read-only | current | Count of PBT packets dropped due to unknown destination MAC |
| 1.3.6.1.4.1.2272.1.12.1.1.23 | ColumnrcStatCtrlPktRtLimitTotalCnt | read-only | current | Total count of control packets that is passed for rate limiting |
| 1.3.6.1.4.1.2272.1.12.1.1.24 | ColumnrcStatCtrlPktRtLimitDropCnt | read-only | current | Count of control packets dropped after rate limiting |
| 1.3.6.1.4.1.2272.1.12.1.1.25 | ColumnrcStatPolicerTotalBytes | read-only | current | The total number of bytes received on the interface. |
| 1.3.6.1.4.1.2272.1.12.1.1.26 | ColumnrcStatPolicerTotalPkts | read-only | current | The total number of packets received on the interface. |
| 1.3.6.1.4.1.2272.1.12.1.1.27 | ColumnrcStatPolicerGreenBytes | read-only | current | The total number of bytes received on the interface that were below the committed rate. |
| 1.3.6.1.4.1.2272.1.12.1.1.28 | ColumnrcStatPolicerYellowBytes | read-only | current | The total number of bytes received on the interface that were above the committed rate but below the peak rate. |
| 1.3.6.1.4.1.2272.1.12.1.1.29 | ColumnrcStatPolicerRedBytes | read-only | current | The total number of bytes received on the interface that were above the peak rate. |
| 1.3.6.1.4.1.2272.1.12.1.1.30 | ColumnrcStatRateLimitDropPktRate | read-only | current | The total number of packets dropped per second on the interface. |
| 1.3.6.1.4.1.2272.1.12.1.1.31 | ColumnrcStatRateLimitDropByteRate | read-only | current | The total number of bytes dropped per second on the interface. |
| 1.3.6.1.4.1.2272.1.12.1.1.32 | ColumnrcStatRateLimitDropTotalBytes | read-only | current | The total number of bytes dropped on the interface. |
| 1.3.6.1.4.1.2272.1.12.1.1.33 | ColumnrcStatRateLimitDropTotalPkts | read-only | current | The total number of packets dropped on the interface. |
| 1.3.6.1.4.1.2272.1.12.2 | TablercStatGigTable | not-accessible | current | A table used to store Gigport error statistics. |
| 1.3.6.1.4.1.2272.1.12.2.1 | RowrcStatGigEntry | not-accessible | current | Gigabit interface error counters |
| 1.3.6.1.4.1.2272.1.12.2.1.1 | ColumnrcStatGigPortIndex | read-only | current | An index value that uniquely identifies a port. This value is similar to ifIndex in MIB2. |
| 1.3.6.1.4.1.2272.1.12.2.1.2 | ColumnrcStatGigLinkFailures | read-only | current | The total number of link failures encountered on this interface. |
| 1.3.6.1.4.1.2272.1.12.2.1.3 | ColumnrcStatGigPacketErrors | read-only | current | The total number of packet errors encountered on this interface. |
| 1.3.6.1.4.1.2272.1.12.2.1.4 | ColumnrcStatGigCarrierErrors | read-only | current | The total number of carrier errors encountered on this interface. |
| 1.3.6.1.4.1.2272.1.12.2.1.5 | ColumnrcStatGigLinkInactiveErrors | read-only | current | The total number of link inactive errors encountered on this interface. |
| 1.3.6.1.4.1.2272.1.12.2.1.6 | ColumnrcStatGigInFlowCtrlPkts | read-only | deprecated | The total number of flow control packets received by this interface. |
| 1.3.6.1.4.1.2272.1.12.2.1.7 | ColumnrcStatGigOutFlowCtrlPkts | read-only | deprecated | The total number of flow control packets transmitted by this interface. |
| 1.3.6.1.4.1.2272.1.12.2.1.8 | ColumnrcStatGigHCInPfcPkts | read-only | current | The total number of Priority Flow Control (PFC) packets received by this interface. |
| 1.3.6.1.4.1.2272.1.12.2.1.9 | ColumnrcStatGigHCOutPfcPkts | read-only | current | The total number of Priority Flow Control (PFC) packets transmitted by this interface. |
| 1.3.6.1.4.1.2272.1.12.2.1.10 | ColumnrcStatGigHCInFlowCtrlPkts | read-only | current | The total number of flow control packets received by this interface. |
| 1.3.6.1.4.1.2272.1.12.2.1.11 | ColumnrcStatGigHCOutFlowCtrlPkts | read-only | current | The total number of flow control packets transmitted by this interface. |
| 1.3.6.1.4.1.2272.1.12.2.1.12 | ColumnrcStatGigFramesBad | read-only | current | The total number of bad frames |
| 1.3.6.1.4.1.2272.1.12.2.1.13 | ColumnrcStatGigFragmentErrors | read-only | current | The total number of fragment errors |
| 1.3.6.1.4.1.2272.1.12.2.1.14 | ColumnrcStatGigLongJabberErrors | read-only | current | The total number of long jabber errors |
| 1.3.6.1.4.1.2272.1.12.2.1.15 | ColumnrcStatGigDefaultDrops | read-only | current | The total number of default drops |
| 1.3.6.1.4.1.2272.1.12.2.1.16 | ColumnrcStatGigIllegalLenError | read-only | current | The total number of illegal length error |
| 1.3.6.1.4.1.2272.1.12.2.1.17 | ColumnrcStatGigMismatchError | read-only | current | The total number of mismatch error |
| 1.3.6.1.4.1.2272.1.12.2.1.18 | ColumnrcStatGigOutOfRangeError | read-only | current | The total number of out of range error |
| 1.3.6.1.4.1.2272.1.12.2.1.19 | ColumnrcStatGigOversize | read-only | current | The total number of oversize |
| 1.3.6.1.4.1.2272.1.12.2.1.20 | ColumnrcStatGigDataErrors | read-only | current | The total number of data errors |
| 1.3.6.1.4.1.2272.1.12.2.1.21 | ColumnrcStatGigJabberErrors | read-only | current | The total number of jabbber errors |
| 1.3.6.1.4.1.2272.1.12.3 | NodercStatOspf | |||
| 1.3.6.1.4.1.2272.1.12.3.1 | ScalarrcStatOspfBuffersAllocated | read-only | current | Used to indicate the number of buffers allocated for OSPF. |
| 1.3.6.1.4.1.2272.1.12.3.2 | ScalarrcStatOspfBuffersFreed | read-only | current | Used to indicate the number of buffers that are freed by the OSPF. |
| 1.3.6.1.4.1.2272.1.12.3.3 | ScalarrcStatOspfBufferAllocFailures | read-only | current | Used to indicate the number of times that OSPF has failed to allocate buffers. |
| 1.3.6.1.4.1.2272.1.12.3.4 | ScalarrcStatOspfBufferFreeFailures | read-only | current | Used to indicate the number of times that OSPF has failed to free buffers. |
| 1.3.6.1.4.1.2272.1.12.3.5 | ScalarrcStatOspfTxPackets | read-only | current | Used to indicate the number of packets transmitted by OSPF. |
| 1.3.6.1.4.1.2272.1.12.3.6 | ScalarrcStatOspfRxPackets | read-only | current | Used to indicate the number of packets received by OSPF. |
| 1.3.6.1.4.1.2272.1.12.3.7 | ScalarrcStatOspfTxDropPackets | read-only | current | Used to indicate the number of packets dropped before transmitted by OSPF. |
| 1.3.6.1.4.1.2272.1.12.3.8 | ScalarrcStatOspfRxDropPackets | read-only | current | Used to indicate the number of packets dropped before received by OSPF. |
| 1.3.6.1.4.1.2272.1.12.3.9 | ScalarrcStatOspfRxBadPackets | read-only | current | Used to indicate the number of packets received by OSPF that are bad. |
| 1.3.6.1.4.1.2272.1.12.3.10 | ScalarrcStatOspfSpfRuns | read-only | current | Used to indicate the total number of SPF calculatations performed by OSPF, which also includes the number of partial route table calculation for Incremental Up… |
| 1.3.6.1.4.1.2272.1.12.3.11 | ScalarrcStatOspfLastSpfRun | read-only | current | Used to indicate the time(SysUpTime) since the last spf calculated by OSPF. |
| 1.3.6.1.4.1.2272.1.12.3.12 | ScalarrcStatOspfLsdbTblSize | read-only | current | Used to indicate the number of entries in the linkstate database table. |
| 1.3.6.1.4.1.2272.1.12.3.13 | ScalarrcStatOspfRoutes | read-only | current | Used to indicate the number of OSPF routes added to RTM. |
| 1.3.6.1.4.1.2272.1.12.3.14 | ScalarrcStatOspfAdjacencies | read-only | current | Used to indicate the number of adjacencies existing. |
| 1.3.6.1.4.1.2272.1.12.3.15 | ScalarrcStatOspfAreas | read-only | current | Used to indicate the number of areas configured |
| 1.3.6.1.4.1.2272.1.12.3.16 | ScalarrcStatOspfNbrs | read-only | current | Used to indicate the number of ospf neighbors |
| 1.3.6.1.4.1.2272.1.12.3.17 | ScalarrcStatOspfBadLsReqs | read-only | current | Used to indicate the number of bad ls requests. |
| 1.3.6.1.4.1.2272.1.12.3.18 | ScalarrcStatOspfSeqMismatches | read-only | current | Used to indicate the number of sequence mismatched packets. |
| 1.3.6.1.4.1.2272.1.12.3.19 | ScalarrcStatOspfNumAllocDDP | read-only | current | Used to indicate the number of DD packet buffers allocated for OSPF. |
| 1.3.6.1.4.1.2272.1.12.3.20 | ScalarrcStatOspfNumFreeDDP | read-only | current | Used to indicate the number of DD packet buffers that are freed by the OSPF. |
| 1.3.6.1.4.1.2272.1.12.3.21 | ScalarrcStatOspfReset | read-write | current | reset Ospf global stats |
| 1.3.6.1.4.1.2272.1.12.4 | NodercStatIgmp | |||
| 1.3.6.1.4.1.2272.1.12.4.1 | ScalarrcStatIgmpInMsgs | read-only | current | Used to indicate the number of Igmp packets received by the device. |
| 1.3.6.1.4.1.2272.1.12.4.2 | ScalarrcStatIgmpInErrors | read-only | current | Used to indicate the number of Igmp packets received that are with checksum errors. |
| 1.3.6.1.4.1.2272.1.12.4.3 | ScalarrcStatIgmpInQueries | read-only | current | Used to indicate the number of Igmp queries received by the device. |
| 1.3.6.1.4.1.2272.1.12.4.4 | ScalarrcStatIgmpInReports | read-only | current | Used to indicate the number of Igmp reports received by the device. |
| 1.3.6.1.4.1.2272.1.12.4.5 | ScalarrcStatIgmpInLeaves | read-only | current | Used to indicate the number of Igmp Leaves received by the device. |
| 1.3.6.1.4.1.2272.1.12.4.6 | ScalarrcStatIgmpInvalid | read-only | current | Used to indicate the number of Igmp packets received by the device that contained invalid type. |
| 1.3.6.1.4.1.2272.1.12.4.7 | ScalarrcStatIgmpOutMsgs | read-only | current | Used to indicate the number of Igmp queries sent by the device. |
| 1.3.6.1.4.1.2272.1.12.5 | TablercStatOspfIfTable | not-accessible | current | A table used to store OSPF interface statistics. |
| 1.3.6.1.4.1.2272.1.12.5.1 | RowrcStatOspfIfEntry | not-accessible | current | Ospf interface statistics |
| 1.3.6.1.4.1.2272.1.12.5.1.1 | ColumnrcStatOspfIfIndex | read-only | current | An unique value that is used to identify a physical interface. |
| 1.3.6.1.4.1.2272.1.12.5.1.2 | ColumnrcStatOspfIfRxHellos | read-only | current | Used to indicate the number hello packets received by this interface. |
| 1.3.6.1.4.1.2272.1.12.5.1.3 | ColumnrcStatOspfIfRxDBDescrs | read-only | current | Used to indicate the number database descriptor packets received by this interface. |
| 1.3.6.1.4.1.2272.1.12.5.1.4 | ColumnrcStatOspfIfRxLSUpdates | read-only | current | Used to indicate the number Link state update packets received by this interface. |
| 1.3.6.1.4.1.2272.1.12.5.1.5 | ColumnrcStatOspfIfRxLSReqs | read-only | current | Used to indicate the number Link state request packets received by this interface. |
| 1.3.6.1.4.1.2272.1.12.5.1.6 | ColumnrcStatOspfIfRxLSAcks | read-only | current | Used to indicate the number Link state acknowlege packets received by this interface. |
| 1.3.6.1.4.1.2272.1.12.5.1.7 | ColumnrcStatOspfIfTxHellos | read-only | current | Used to indicate the number hello packets transmitted by this interface. |
| 1.3.6.1.4.1.2272.1.12.5.1.8 | ColumnrcStatOspfIfTxDBDescrs | read-only | current | Used to indicate the number database descriptor packets transmitted by this interface. |
| 1.3.6.1.4.1.2272.1.12.5.1.9 | ColumnrcStatOspfIfTxLSUpdates | read-only | current | Used to indicate the number Link state update packets transmitted by this interface. |
| 1.3.6.1.4.1.2272.1.12.5.1.10 | ColumnrcStatOspfIfTxLSReqs | read-only | current | Used to indicate the number Link state request packets transmitted by this interface. |
| 1.3.6.1.4.1.2272.1.12.5.1.11 | ColumnrcStatOspfIfTxLSAcks | read-only | current | Used to indicate the number Link state acknowlege packets transmitted by this interface. |
| 1.3.6.1.4.1.2272.1.12.5.1.12 | ColumnrcStatOspfIfVersionMismatches | read-only | current | Used to indicate the number version mismatches received by this interface. |
| 1.3.6.1.4.1.2272.1.12.5.1.13 | ColumnrcStatOspfIfAreaMismatches | read-only | current | Used to indicate the number area mismatches received by this interface. |
| 1.3.6.1.4.1.2272.1.12.5.1.14 | ColumnrcStatOspfIfAuthTypeMismatches | read-only | current | Used to indicate the number AuthType mismatches received by this interface. |
| 1.3.6.1.4.1.2272.1.12.5.1.15 | ColumnrcStatOspfIfAuthFailures | read-only | current | Used to indicate the number Authentication failures. |
| 1.3.6.1.4.1.2272.1.12.5.1.16 | ColumnrcStatOspfIfNetMaskMismatches | read-only | current | Used to indicate the number net mask mismatches received by this interface. |
| 1.3.6.1.4.1.2272.1.12.5.1.17 | ColumnrcStatOspfIfHelloIntervalMismatches | read-only | current | Used to indicate the number hello interval mismatches received by this interface. |
| 1.3.6.1.4.1.2272.1.12.5.1.18 | ColumnrcStatOspfIfDeadIntervalMismatches | read-only | current | Used to indicate the number dead interval mismatches received by this interface. |
| 1.3.6.1.4.1.2272.1.12.5.1.19 | ColumnrcStatOspfIfOptionMismatches | read-only | current | Used to indicate the number options mismatches received by this interface. |
| 1.3.6.1.4.1.2272.1.12.6 | NodercStatMlt | |||
| 1.3.6.1.4.1.2272.1.12.6.1 | TablercStatMltIfExtnTable | not-accessible | current | A table used to store Mlt interface statistics. |
| 1.3.6.1.4.1.2272.1.12.6.1.1 | RowrcStatMltIfExtnEntry | not-accessible | current | Mlt interface statistics |
| 1.3.6.1.4.1.2272.1.12.6.1.1.1 | ColumnrcStatMltIfExtnMltId | read-only | current | Mlt Id |
| 1.3.6.1.4.1.2272.1.12.6.1.1.2 | ColumnrcStatMltIfExtnIfInMulticastPkts | read-only | current | multi-pkts to upper |
| 1.3.6.1.4.1.2272.1.12.6.1.1.3 | ColumnrcStatMltIfExtnIfInBroadcastPkts | read-only | current | broad-pkts to upper |
| 1.3.6.1.4.1.2272.1.12.6.1.1.4 | ColumnrcStatMltIfExtnIfOutMulticastPkts | read-only | current | multi-pkts from upper |
| 1.3.6.1.4.1.2272.1.12.6.1.1.5 | ColumnrcStatMltIfExtnIfOutBroadcastPkts | read-only | current | broad-pkts from upper |
| 1.3.6.1.4.1.2272.1.12.6.1.1.6 | ColumnrcStatMltIfExtnIfHCInOctets | read-only | current | The total number of octets received on the MLT interface, including framing characters. |
| 1.3.6.1.4.1.2272.1.12.6.1.1.7 | ColumnrcStatMltIfExtnIfHCInUcastPkts | read-only | current | The number of packets delivered by this MLT to a higher MLT that were not addressed to a nulticast or broadcase address at this sublayer. |
| 1.3.6.1.4.1.2272.1.12.6.1.1.8 | ColumnrcStatMltIfExtnIfHCInMulticastPkt | read-only | current | The number of packets delivered to this MLT that were addressed to a nulticast address at this sublayer. For a MAC layer protocol, this number includes both Gr… |
| 1.3.6.1.4.1.2272.1.12.6.1.1.9 | ColumnrcStatMltIfExtnIfHCInBroadcastPkt | read-only | current | The number of packets delivered to this MLT that were addressed to a broadcast address at this sublayer. |
| 1.3.6.1.4.1.2272.1.12.6.1.1.10 | ColumnrcStatMltIfExtnIfHCOutOctets | read-only | current | The total number of octets transmitted out of the MLT interface, including framing characters. |
| 1.3.6.1.4.1.2272.1.12.6.1.1.11 | ColumnrcStatMltIfExtnIfHCOutUcastPkts | read-only | current | The number of packets that hight-level protocols requested be transmitted that were not addressed to a multicast address at this MLT. This total number include… |
| 1.3.6.1.4.1.2272.1.12.6.1.1.12 | ColumnrcStatMltIfExtnIfHCOutMulticast | read-only | current | The total number of packets that hight-level protocols requested be transmitted, and that were addressed to a multicast address at this MLT, including those th… |
| 1.3.6.1.4.1.2272.1.12.6.1.1.13 | ColumnrcStatMltIfExtnIfHCOutBroadcast | read-only | current | The total number of packets that hight-level protocols requested be transmitted, and that were addressed to a broadcase address at this MLT, including those th… |
| 1.3.6.1.4.1.2272.1.12.6.1.1.14 | ColumnrcStatMltIfExtnIfHCInLsmPkts | read-only | current | The total number of Link State Messaging (LSM) packets delivered to this MLT. |
| 1.3.6.1.4.1.2272.1.12.6.1.1.15 | ColumnrcStatMltIfExtnIfHCOutLsmPkts | read-only | current | The total number of Link State Messaging (LSM) packets trasmitted on this MLT. |
| 1.3.6.1.4.1.2272.1.12.6.2 | TablercStatMltEtherTable | not-accessible | current | A table used to store Mlt Ethernet statistics. |
| 1.3.6.1.4.1.2272.1.12.6.2.1 | RowrcStatMltEtherEntry | not-accessible | current | Mlt enternet statistics |
| 1.3.6.1.4.1.2272.1.12.6.2.1.1 | ColumnrcStatMltEtherMltId | read-only | current | A value that uniquely identifies the Multi-Link Trunk associated with this entry. |
| 1.3.6.1.4.1.2272.1.12.6.2.1.2 | ColumnrcStatMltEtherAlignmentErrors | read-only | current | A count of frames received on a particular MLT that are not an integral number of octets in length and do not pass the FCS check. The count represented by an i… |
| 1.3.6.1.4.1.2272.1.12.6.2.1.3 | ColumnrcStatMltEtherFCSErrors | read-only | current | A count of frames received on an MLT that are an integral number of octets in length but do not pass the FCS check. The count represented by an instance of thi… |
| 1.3.6.1.4.1.2272.1.12.6.2.1.4 | ColumnrcStatMltEtherSingleCollFrames | read-only | current | A count of successfully transmitted frames on a particular MLT for which transmission is inhibited by exactly one collision. A frame that is counted by an inst… |
| 1.3.6.1.4.1.2272.1.12.6.2.1.5 | ColumnrcStatMltEtherMultipleCollFrames | read-only | current | A count of successfully transmitted frames on a particular MLT for which transmission is inhibited by more than one collision. A frame that is counted by an in… |
| 1.3.6.1.4.1.2272.1.12.6.2.1.6 | ColumnrcStatMltEtherSQETestError | read-only | current | A count of times that the SQE TEST ERROR message is generated by the PLS sublayer for a particular MLT. SQE stands for Signal Quality Error. |
| 1.3.6.1.4.1.2272.1.12.6.2.1.7 | ColumnrcStatMltEtherDeferredTransmiss | read-only | current | A count of frames for which the first transmission attempt on a particular MLT is delayed because the medium is busy. The count represented by an instance of t… |
| 1.3.6.1.4.1.2272.1.12.6.2.1.8 | ColumnrcStatMltEtherLateCollisions | read-only | current | The number of times that a collision is detected on a particular MLT later than 512 bit-times (64 octets) into the transmission of a packet. Five hundred and t… |
| 1.3.6.1.4.1.2272.1.12.6.2.1.9 | ColumnrcStatMltEtherExcessiveCollis | read-only | current | A count of frames for which transmission on a particular MLT fails due to excessive collisions. |
| 1.3.6.1.4.1.2272.1.12.6.2.1.10 | ColumnrcStatMltEtherIMacTransmitError | read-only | current | A count of frames for which transmission on a particular MLT fails due to an internal MAC sublayer transmit error. A frame is only counted by an instance of th… |
| 1.3.6.1.4.1.2272.1.12.6.2.1.11 | ColumnrcStatMltEtherCarrierSenseError | read-only | current | The number of times that the carrier sense condition was lost or never asserted when attempting to transmit a frame on a particular MLT. The count represented … |
| 1.3.6.1.4.1.2272.1.12.6.2.1.12 | ColumnrcStatMltEtherFrameTooLong | read-only | current | A count of frames received on a particular MLT that exceed the maximum permitted size (1518 octets). The count represented by an instance os this object is inc… |
| 1.3.6.1.4.1.2272.1.12.6.2.1.13 | ColumnrcStatMltEtherIMacReceiveError | read-only | current | A count of frames for which reception on a particular MLT fails due to an internal MAC sublayer receive error. A frame is only counted by an instance of this o… |
| 1.3.6.1.4.1.2272.1.12.6.3 | TablercStatMltIpTable | not-accessible | obsolete | A table used to store Mlt Ip statistics. |
| 1.3.6.1.4.1.2272.1.12.6.3.1 | RowrcStatMltIpEntry | not-accessible | obsolete | Mlt enternet statistics |
| 1.3.6.1.4.1.2272.1.12.6.3.1.1 | ColumnrcStatMltIpMltId | read-only | obsolete | Mlt Id |
| 1.3.6.1.4.1.2272.1.12.6.3.1.2 | ColumnrcStatMltIpInReceives | read-only | obsolete | all incoming packets |
| 1.3.6.1.4.1.2272.1.12.6.3.1.3 | ColumnrcStatMltIpInHdrErrors | read-only | obsolete | hdr errors detected |
| 1.3.6.1.4.1.2272.1.12.6.3.1.4 | ColumnrcStatMltIpInAddrErrors | read-only | obsolete | bad dest. ip addr |
| 1.3.6.1.4.1.2272.1.12.6.3.1.5 | ColumnrcStatMltIpForwDatagrams | read-only | obsolete | packets forwarded |
| 1.3.6.1.4.1.2272.1.12.6.3.1.6 | ColumnrcStatMltIpInUnknownProtos | read-only | obsolete | unsupported protocol |
| 1.3.6.1.4.1.2272.1.12.6.3.1.7 | ColumnrcStatMltIpInDiscards | read-only | obsolete | good, but no buffer |
| 1.3.6.1.4.1.2272.1.12.6.3.1.8 | ColumnrcStatMltIpInDelivers | read-only | obsolete | pkts delivered to upper |
| 1.3.6.1.4.1.2272.1.12.6.3.1.9 | ColumnrcStatMltIpOutRequest | read-only | obsolete | pkts received from upper |
| 1.3.6.1.4.1.2272.1.12.6.3.1.10 | ColumnrcStatMltIpOutDiscards | read-only | obsolete | good, but no buffer |
| 1.3.6.1.4.1.2272.1.12.6.3.1.11 | ColumnrcStatMltIpOutNoRoutes | read-only | obsolete | no route to destination |
| 1.3.6.1.4.1.2272.1.12.6.3.1.12 | ColumnrcStatMltIpReasmReqds | read-only | obsolete | fragments to reassem |
| 1.3.6.1.4.1.2272.1.12.6.3.1.13 | ColumnrcStatMltIpReasmOKs | read-only | obsolete | reassembled successfully |
| 1.3.6.1.4.1.2272.1.12.6.3.1.14 | ColumnrcStatMltIpReasmFails | read-only | obsolete | reassembly failures |
| 1.3.6.1.4.1.2272.1.12.6.3.1.15 | ColumnrcStatMltIpFragOKs | read-only | obsolete | fragment successfully |
| 1.3.6.1.4.1.2272.1.12.6.3.1.16 | ColumnrcStatMltIpFragFails | read-only | obsolete | fragment failure |
| 1.3.6.1.4.1.2272.1.12.6.3.1.17 | ColumnrcStatMltIpFragCreates | read-only | obsolete | pkts due to fragmenting |
| 1.3.6.1.4.1.2272.1.12.6.3.1.18 | ColumnrcStatMltIpRoutingDiscards | read-only | obsolete | Route entries removed |
| 1.3.6.1.4.1.2272.1.12.6.4 | ScalarrcStatSmltIstDownCnt | read-only | current | Counters that counts how the session between the two peering switches has done down since last boot. |
| 1.3.6.1.4.1.2272.1.12.6.5 | ScalarrcStatSmltHelloTxMsgCnt | read-only | current | Counters that counts the tx hello msg. |
| 1.3.6.1.4.1.2272.1.12.6.6 | ScalarrcStatSmltHelloRxMsgCnt | read-only | current | Counters that counts the rx hello msg. |
| 1.3.6.1.4.1.2272.1.12.6.7 | ScalarrcStatSmltLearnMacAddrTxMsgCnt | read-only | current | Counters that counts the tx learn Mac Address msg. |
| 1.3.6.1.4.1.2272.1.12.6.8 | ScalarrcStatSmltLearnMacAddrRxMsgCnt | read-only | current | Counters that counts the rx learn Mac Address msg. |
| 1.3.6.1.4.1.2272.1.12.6.9 | ScalarrcStatSmltMacAddrAgeOutTxMsgCnt | read-only | current | Counters that counts the tx Mac Address Aging Out msg. |
| 1.3.6.1.4.1.2272.1.12.6.10 | ScalarrcStatSmltMacAddrAgeOutRxMsgCnt | read-only | current | Counters that counts the rx Mac Address Aging Out msg. |
| 1.3.6.1.4.1.2272.1.12.6.11 | ScalarrcStatSmltMacAddrAgeExpTxMsgCnt | read-only | current | Counters that counts the tx Mac Address age expired msg. |
| 1.3.6.1.4.1.2272.1.12.6.12 | ScalarrcStatSmltMacAddrAgeExpRxMsgCnt | read-only | current | Counters that counts the rx Mac Address age expired msg. |
| 1.3.6.1.4.1.2272.1.12.6.13 | ScalarrcStatSmltStgInfoTxMsgCnt | read-only | current | Counters that counts the tx Stg information msg. |
| 1.3.6.1.4.1.2272.1.12.6.14 | ScalarrcStatSmltStgInfoRxMsgCnt | read-only | current | Counters that counts the rx Stg information msg. |
| 1.3.6.1.4.1.2272.1.12.6.15 | ScalarrcStatSmltDelMacAddrTxMsgCnt | read-only | current | Counters that counts the tx deleted MAC address msg. |
| 1.3.6.1.4.1.2272.1.12.6.16 | ScalarrcStatSmltDelMacAddrRxMsgCnt | read-only | current | Counters that counts the rx deleted MAC address msg. |
| 1.3.6.1.4.1.2272.1.12.6.17 | ScalarrcStatSmltSmltDownTxMsgCnt | read-only | current | Counters that counts the tx Smlt Down msg. |
| 1.3.6.1.4.1.2272.1.12.6.18 | ScalarrcStatSmltSmltDownRxMsgCnt | read-only | current | Counters that counts the rx Smlt Down msg. |
| 1.3.6.1.4.1.2272.1.12.6.19 | ScalarrcStatSmltSmltUpTxMsgCnt | read-only | current | Counters that counts the tx Smlt Up msg. |
| 1.3.6.1.4.1.2272.1.12.6.20 | ScalarrcStatSmltSmltUpRxMsgCnt | read-only | current | Counters that counts the rx Smlt Up msg. |
| 1.3.6.1.4.1.2272.1.12.6.21 | ScalarrcStatSmltSendMacTblTxMsgCnt | read-only | current | Counters that counts the tx Send Mac Table msg. |
| 1.3.6.1.4.1.2272.1.12.6.22 | ScalarrcStatSmltSendMacTblRxMsgCnt | read-only | current | Counters that counts the rx Send Mac Table msg. |
| 1.3.6.1.4.1.2272.1.12.6.23 | ScalarrcStatSmltIgmpTxMsgCnt | read-only | current | Counters that counts the tx Igmp msg. |
| 1.3.6.1.4.1.2272.1.12.6.24 | ScalarrcStatSmltIgmpRxMsgCnt | read-only | current | Counters that counts the rx Igmp msg. |
| 1.3.6.1.4.1.2272.1.12.6.25 | ScalarrcStatSmltPortDownTxMsgCnt | read-only | current | Counters that counts the tx port down msg. |
| 1.3.6.1.4.1.2272.1.12.6.26 | ScalarrcStatSmltPortDownRxMsgCnt | read-only | current | Counters that counts the rx port down msg. |
| 1.3.6.1.4.1.2272.1.12.6.27 | ScalarrcStatSmltReqMacTblTxMsgCnt | read-only | current | Counters that counts the tx request Mac table msg. |
| 1.3.6.1.4.1.2272.1.12.6.28 | ScalarrcStatSmltReqMacTblRxMsgCnt | read-only | current | Counters that counts the rx request Mac table msg. |
| 1.3.6.1.4.1.2272.1.12.6.29 | ScalarrcStatSmltRxUnknownMsgTypeCnt | read-only | current | Counters that counts the rx unknown msg type. |
| 1.3.6.1.4.1.2272.1.12.6.30 | TablercStatMltIfUtilTable | not-accessible | current | A table used to store Mlt interface utilization. |
| 1.3.6.1.4.1.2272.1.12.6.30.1 | RowrcStatMltIfUtilEntry | not-accessible | current | Mlt interface utilization |
| 1.3.6.1.4.1.2272.1.12.6.30.1.1 | ColumnrcStatMltIfUtilMltId | not-accessible | current | To assign an Id within the range specified to the Mlt created |
| 1.3.6.1.4.1.2272.1.12.6.30.1.2 | ColumnrcStatMltIfUtilIfHCInOctets | read-only | current | The total number of octets received on the MLT interface, including framing characters. |
| 1.3.6.1.4.1.2272.1.12.6.30.1.3 | ColumnrcStatMltIfUtilIfHCInUtil | read-only | current | The best estimate of the mean physical layer network utilization on this interface during this interval, in percent. |
| 1.3.6.1.4.1.2272.1.12.6.30.1.4 | ColumnrcStatMltIfUtilIfHCOutOctets | read-only | current | The total number of octets transmitted out of the MLT interface, including framing characters. |
| 1.3.6.1.4.1.2272.1.12.6.30.1.5 | ColumnrcStatMltIfUtilIfHCOutUtil | read-only | current | The best estimate of the mean physical layer network utilization on this interface during this interval, in percent. |
| 1.3.6.1.4.1.2272.1.12.6.31 | ScalarrcStatSmltLacpInfoRxMsgCnt | read-only | current | LACP info msgs received. |
| 1.3.6.1.4.1.2272.1.12.6.32 | ScalarrcStatSmltLacpInfoTxMsgCnt | read-only | current | LACP info msgs transmitted. |
| 1.3.6.1.4.1.2272.1.12.6.33 | TablercStatMltUtilTable | not-accessible | current | A table used to store statistics for MLT members utilization. |
| 1.3.6.1.4.1.2272.1.12.6.33.1 | RowrcStatMltUtilEntry | not-accessible | current | An entry for MLT members utilization statistics table. |
| 1.3.6.1.4.1.2272.1.12.6.33.1.1 | ColumnrcStatMltUtilPortIfIndex | not-accessible | current | Port ifIndex, member of rcMltId. |
| 1.3.6.1.4.1.2272.1.12.6.33.1.2 | ColumnrcStatMltUtilTrafficType | not-accessible | current | Type of traffic for one MLT port interface. |
| 1.3.6.1.4.1.2272.1.12.6.33.1.3 | ColumnrcStatMltUtilTrafficLast5Min | read-only | current | This object returns the percentage of traffic on one MLT port interface for the last 5 minutes. |
| 1.3.6.1.4.1.2272.1.12.6.33.1.4 | ColumnrcStatMltUtilTrafficLast30Min | read-only | current | This object returns the percentage of traffic on one MLT port interface for the last 30 minutes. |
| 1.3.6.1.4.1.2272.1.12.6.33.1.5 | ColumnrcStatMltUtilTrafficLast1Hour | read-only | current | This object returns the percentage of traffic on one MLT port interface for the last hour. |
| 1.3.6.1.4.1.2272.1.12.6.34 | ScalarrcStatSmltSpbmInfoTxMsgCnt | read-only | current | This object returns the number of SPBM information tx messages. |
| 1.3.6.1.4.1.2272.1.12.6.35 | ScalarrcStatSmltSpbmInfoFailTxMsgCnt | read-only | current | This object returns the number of SPBM information Fail tx messages. |
| 1.3.6.1.4.1.2272.1.12.6.36 | ScalarrcStatSmltSpbmInfoRxMsgCnt | read-only | current | This object returns the number of SPBM information rx messages. |
| 1.3.6.1.4.1.2272.1.12.6.37 | ScalarrcStatSmltSpbmLearnMacRxMsgCnt | read-only | current | This object returns the number of SPBM learn Mac rx messages. |
| 1.3.6.1.4.1.2272.1.12.6.38 | ScalarrcStatSmltSpbmLearnMacTxMsgCnt | read-only | current | This object returns the number of SPBM learn Mac tx messages. |
| 1.3.6.1.4.1.2272.1.12.6.39 | ScalarrcStatSmltSpbmDelMacRxMsgCnt | read-only | current | This object returns the number of SPBM delete Mac rx messages. |
| 1.3.6.1.4.1.2272.1.12.6.40 | ScalarrcStatSmltSpbmDelMacTxMsgCnt | read-only | current | This object returns the number of SPBM delete Mac tx messages. |
| 1.3.6.1.4.1.2272.1.12.6.41 | ScalarrcStatSmltSpbmMacAgeOutRxMsgCnt | read-only | current | This object returns the number of SPBM Mac Aging Out rx messages. |
| 1.3.6.1.4.1.2272.1.12.6.42 | ScalarrcStatSmltSpbmMacAgeOutTxMsgCnt | read-only | current | This object returns the number of SPBM Mac Aging Out tx messages. |
| 1.3.6.1.4.1.2272.1.12.6.43 | ScalarrcStatSmltSpbmMacTblRxMsgCnt | read-only | current | This object returns the number of SPBM Mac Table rx messages. |
| 1.3.6.1.4.1.2272.1.12.6.44 | ScalarrcStatSmltPortTblSyncReqTxMsgCnt | read-only | current | Smlt table sync request tx msg counter |
| 1.3.6.1.4.1.2272.1.12.6.45 | ScalarrcStatSmltPortTblSyncReqRxMsgCnt | read-only | current | Smlt table sync request rx msg counter |
| 1.3.6.1.4.1.2272.1.12.6.46 | ScalarrcStatSmltPortTblSyncTxMsgCnt | read-only | current | Smlt table sync tx msg counter |
| 1.3.6.1.4.1.2272.1.12.6.47 | ScalarrcStatSmltPortTblSyncRxMsgCnt | read-only | current | Smlt table sync rx msg counter |
| 1.3.6.1.4.1.2272.1.12.6.48 | ScalarrcStatSmltPortUpdateTxMsgCnt | read-only | current | Smlt port update tx msg counter |
| 1.3.6.1.4.1.2272.1.12.6.49 | ScalarrcStatSmltPortUpdateRxMsgCnt | read-only | current | Smlt port update rx msg counter |
| 1.3.6.1.4.1.2272.1.12.6.50 | ScalarrcStatSmltEntryUpdateTxMsgCnt | read-only | current | Smlt Entry update tx msg counter |
| 1.3.6.1.4.1.2272.1.12.6.51 | ScalarrcStatSmltEntryUpdateRxMsgCnt | read-only | current | Smlt Entry update rx msg counter |
| 1.3.6.1.4.1.2272.1.12.6.52 | ScalarrcStatSmltDialectNegotiateTxMsgCnt | read-only | current | Smlt protocol ID tx msg counter |
| 1.3.6.1.4.1.2272.1.12.6.53 | ScalarrcStatSmltDialectNegotiateRxMsgCnt | read-only | current | Smlt protocol ID rx msg counter |
| 1.3.6.1.4.1.2272.1.12.6.54 | ScalarrcStatSmltUpdateRespTxMsgCnt | read-only | current | Smlt update response tx msg counter |
| 1.3.6.1.4.1.2272.1.12.6.55 | ScalarrcStatSmltUpdateRespRxMsgCnt | read-only | current | Smlt update response rx msg counter |
| 1.3.6.1.4.1.2272.1.12.6.56 | ScalarrcStatSmltTransQHighWaterMarkMsgCnt | read-only | current | Smlt transaction Queue high watermark msg count |
| 1.3.6.1.4.1.2272.1.12.6.57 | ScalarrcStatSmltPollCountHighWaterMarkCnt | read-only | current | Smlt poll count high watermark count |
| 1.3.6.1.4.1.2272.1.12.7 | TablercStatOspfIfV2Table | not-accessible | obsolete | A table used to store OSPF interface statistics. |
| 1.3.6.1.4.1.2272.1.12.7.1 | RowrcStatOspfIfV2Entry | not-accessible | obsolete | Ospf interface statistics |
| 1.3.6.1.4.1.2272.1.12.7.1.1 | ColumnrcStatOspfIfV2Index | read-only | obsolete | An unique value that is used to identify a physical interface. |
| 1.3.6.1.4.1.2272.1.12.7.1.2 | ColumnrcStatOspfIfV2Addr | read-only | obsolete | Ip Address |
| 1.3.6.1.4.1.2272.1.12.7.1.3 | ColumnrcStatOspfIfV2RxHellos | read-only | obsolete | Used to indicate the number hello packets received by this interface. |
| 1.3.6.1.4.1.2272.1.12.7.1.4 | ColumnrcStatOspfIfV2RxDBDescrs | read-only | obsolete | Used to indicate the number database descriptor packets received by this interface. |
| 1.3.6.1.4.1.2272.1.12.7.1.5 | ColumnrcStatOspfIfV2RxLSUpdates | read-only | obsolete | Used to indicate the number Link state update packets received by this interface. |
| 1.3.6.1.4.1.2272.1.12.7.1.6 | ColumnrcStatOspfIfV2RxLSReqs | read-only | obsolete | Used to indicate the number Link state request packets received by this interface. |
| 1.3.6.1.4.1.2272.1.12.7.1.7 | ColumnrcStatOspfIfV2RxLSAcks | read-only | obsolete | Used to indicate the number Link state acknowlege packets received by this interface. |
| 1.3.6.1.4.1.2272.1.12.7.1.8 | ColumnrcStatOspfIfV2TxHellos | read-only | obsolete | Used to indicate the number hello packets transmitted by this interface. |
| 1.3.6.1.4.1.2272.1.12.7.1.9 | ColumnrcStatOspfIfV2TxDBDescrs | read-only | obsolete | Used to indicate the number database descriptor packets transmitted by this interface. |
| 1.3.6.1.4.1.2272.1.12.7.1.10 | ColumnrcStatOspfIfV2TxLSUpdates | read-only | obsolete | Used to indicate the number Link state update packets transmitted by this interface. |
| 1.3.6.1.4.1.2272.1.12.7.1.11 | ColumnrcStatOspfIfV2TxLSReqs | read-only | obsolete | Used to indicate the number Link state request packets transmitted by this interface. |
| 1.3.6.1.4.1.2272.1.12.7.1.12 | ColumnrcStatOspfIfV2TxLSAcks | read-only | obsolete | Used to indicate the number Link state acknowlege packets transmitted by this interface. |
| 1.3.6.1.4.1.2272.1.12.7.1.13 | ColumnrcStatOspfIfV2VersionMismatches | read-only | obsolete | Used to indicate the number version mismatches received by this interface. |
| 1.3.6.1.4.1.2272.1.12.7.1.14 | ColumnrcStatOspfIfV2AreaMismatches | read-only | obsolete | Used to indicate the number area mismatches received by this interface. |
| 1.3.6.1.4.1.2272.1.12.7.1.15 | ColumnrcStatOspfIfV2AuthTypeMismatches | read-only | obsolete | Used to indicate the number AuthType mismatches received by this interface. |
| 1.3.6.1.4.1.2272.1.12.7.1.16 | ColumnrcStatOspfIfV2AuthFailures | read-only | obsolete | Used to indicate the number Authentication failures. |
| 1.3.6.1.4.1.2272.1.12.7.1.17 | ColumnrcStatOspfIfV2NetMaskMismatches | read-only | obsolete | Used to indicate the number net mask mismatches received by this interface. |
| 1.3.6.1.4.1.2272.1.12.7.1.18 | ColumnrcStatOspfIfV2HelloIntervalMismatches | read-only | obsolete | Used to indicate the number hello interval mismatches received by this interface. |
| 1.3.6.1.4.1.2272.1.12.7.1.19 | ColumnrcStatOspfIfV2DeadIntervalMismatches | read-only | obsolete | Used to indicate the number dead interval mismatches received by this interface. |
| 1.3.6.1.4.1.2272.1.12.7.1.20 | ColumnrcStatOspfIfV2OptionMismatches | read-only | obsolete | Used to indicate the number options mismatches received by this interface. |
| 1.3.6.1.4.1.2272.1.12.8 | NodercStatPos | |||
| 1.3.6.1.4.1.2272.1.12.8.1 | TablercStatPosControlTable | not-accessible | current | |
| 1.3.6.1.4.1.2272.1.12.8.1.1 | RowrcStatPosControlEntry | not-accessible | current | |
| 1.3.6.1.4.1.2272.1.12.8.1.1.1 | ColumnrcStatPosControlPortIndex | read-only | current | A unique value for each port. |
| 1.3.6.1.4.1.2272.1.12.8.1.1.2 | ColumnrcStatPosControlInErrors | read-only | current | The total number of error pkts received on the interface. |
| 1.3.6.1.4.1.2272.1.12.8.1.1.3 | ColumnrcStatPosControlInUnknownProtos | read-only | current | The number of packets received via the interface which were discarded because of an unknown or unsupported protocol. |
| 1.3.6.1.4.1.2272.1.12.8.1.1.4 | ColumnrcStatPosControlOutErrors | read-only | current | The number of outbound packets that could not be transmitted because of errors. |
| 1.3.6.1.4.1.2272.1.12.8.1.1.5 | ColumnrcStatPosControlHCInOctets | read-only | current | The total number of octets received of the interface, including framing characters. |
| 1.3.6.1.4.1.2272.1.12.8.1.1.6 | ColumnrcStatPosControlHCInUcastPkts | read-only | current | The number of subnetwork-unicast packets received from a higher-layer protocol. |
| 1.3.6.1.4.1.2272.1.12.8.1.1.7 | ColumnrcStatPosControlHCInMulticastPkts | read-only | current | The number of multicast packets received from a higher-layer protocol. |
| 1.3.6.1.4.1.2272.1.12.8.1.1.8 | ColumnrcStatPosControlHCInBroadcastPkts | read-only | current | The number of broadcast packets received from a higher-layer protocol. |
| 1.3.6.1.4.1.2272.1.12.8.1.1.9 | ColumnrcStatPosControlHCInDiscards | read-only | current | The number of inbound packets which were chosen to be discarded even though no errors had been detected to prevent their being deliverable to a higher-layer pr… |
| 1.3.6.1.4.1.2272.1.12.8.1.1.10 | ColumnrcStatPosControlHCOutOctets | read-only | current | The total number of octets trasmitted out of the interface, including framing characters. |
| 1.3.6.1.4.1.2272.1.12.8.1.1.11 | ColumnrcStatPosControlHCOutUcastPkts | read-only | current | The total number of packets that higher-level protocols requested be transmitted to a subnetwork-unicast address, including those that were discarded or not se… |
| 1.3.6.1.4.1.2272.1.12.8.1.1.12 | ColumnrcStatPosControlHCOutMulticastPkts | read-only | current | The number of multicast packets delivered to a higher-layer protocol. |
| 1.3.6.1.4.1.2272.1.12.8.1.1.13 | ColumnrcStatPosControlHCOutBroadcastPkts | read-only | current | The number of broadcast packets delivered to a higher-layer protocol. |
| 1.3.6.1.4.1.2272.1.12.8.1.1.14 | ColumnrcStatPosControlHCOutDiscards | read-only | current | The number of outbound packets which were chosen to be discarded even though no errors had been detected to prevent their being transmitted. |
| 1.3.6.1.4.1.2272.1.12.9 | NodercStatMulticast | |||
| 1.3.6.1.4.1.2272.1.12.9.1 | ScalarrcStatMulticastSourceGroupThresholdExceeded | read-only | current | The count of number of times the threshold of available IP Multicast (Source,Group) Records was reached. When this threshold is reached, a new IP Multicast str… |
| 1.3.6.1.4.1.2272.1.12.9.2 | ScalarrcStatMulticastEgressStreamThresholdExceeded | read-only | current | The count of number of times the threshold of available IP Multicast Egress Forwarding Records was reached. When this threshold is reached, a new IP Multicast … |
| 1.3.6.1.4.1.2272.1.12.10 | NodercStatBgp | |||
| 1.3.6.1.4.1.2272.1.12.10.1 | ScalarrcStatBgpStarts | read-only | current | Number of times BGP connection started |
| 1.3.6.1.4.1.2272.1.12.10.2 | ScalarrcStatBgpStops | read-only | current | Number of times BGP connection stopped |
| 1.3.6.1.4.1.2272.1.12.10.3 | ScalarrcStatBgpOpens | read-only | current | Number of times BGP opens TCP |
| 1.3.6.1.4.1.2272.1.12.10.4 | ScalarrcStatBgpCloses | read-only | current | Number of times BGP closes TCP |
| 1.3.6.1.4.1.2272.1.12.10.5 | ScalarrcStatBgpFails | read-only | current | Number of times TCP attempts failed |
| 1.3.6.1.4.1.2272.1.12.10.6 | ScalarrcStatBgpFatals | read-only | current | Number of times TCP crashes due to fatal error |
| 1.3.6.1.4.1.2272.1.12.10.7 | ScalarrcStatBgpConnExps | read-only | current | Number of times TCP retry timer expired |
| 1.3.6.1.4.1.2272.1.12.10.8 | ScalarrcStatBgpHoldExps | read-only | current | Number of times hold timer expired |
| 1.3.6.1.4.1.2272.1.12.10.9 | ScalarrcStatBgpKeepExps | read-only | current | Number of times keepalive timer expired |
| 1.3.6.1.4.1.2272.1.12.10.10 | ScalarrcStatBgpRxOpens | read-only | current | Number of OPENs BGP receives |
| 1.3.6.1.4.1.2272.1.12.10.11 | ScalarrcStatBgpRxKeeps | read-only | current | Number of KEEPALIVEs BGP recieves |
| 1.3.6.1.4.1.2272.1.12.10.12 | ScalarrcStatBgpRxUpdates | read-only | current | Number of UPDATEs BGP recieves |
| 1.3.6.1.4.1.2272.1.12.10.13 | ScalarrcStatBgpRxNotifys | read-only | current | Number NOTIFICATIONs BGP recieves |
| 1.3.6.1.4.1.2272.1.12.10.14 | ScalarrcStatBgpTxOpens | read-only | current | Number of OPENs BGP transmitted |
| 1.3.6.1.4.1.2272.1.12.10.15 | ScalarrcStatBgpTxKeeps | read-only | current | Number of KEEPALIVEs BGP transmitted |
| 1.3.6.1.4.1.2272.1.12.10.16 | ScalarrcStatBgpTxUpdates | read-only | current | Number of UPDATEs BGP transmits |
| 1.3.6.1.4.1.2272.1.12.10.17 | ScalarrcStatBgpTxNotifys | read-only | current | Number of NOTIFICATIONs BGP transmits |
| 1.3.6.1.4.1.2272.1.12.10.18 | ScalarrcStatBgpBadEvents | read-only | current | Number of invalid events FSM received |
| 1.3.6.1.4.1.2272.1.12.10.19 | ScalarrcStatBgpSyncFails | read-only | current | Number of times FDB sync failed |
| 1.3.6.1.4.1.2272.1.12.10.20 | ScalarrcStatBgpTrEvent | read-only | current | Trace event |
| 1.3.6.1.4.1.2272.1.12.10.21 | ScalarrcStatBgpRxECodeHeader | read-only | current | Total Header errors received |
| 1.3.6.1.4.1.2272.1.12.10.22 | ScalarrcStatBgpRxECodeOpen | read-only | current | Total Open errors received |
| 1.3.6.1.4.1.2272.1.12.10.23 | ScalarrcStatBgpRxECodeUpdate | read-only | current | Total Update errors received |
| 1.3.6.1.4.1.2272.1.12.10.24 | ScalarrcStatBgpRxECodeHoldtimer | read-only | current | Total Holdtimer errors received |
| 1.3.6.1.4.1.2272.1.12.10.25 | ScalarrcStatBgpRxECodeFSM | read-only | current | Total FSM errors received |
| 1.3.6.1.4.1.2272.1.12.10.26 | ScalarrcStatBgpRxECodeCease | read-only | current | Total Cease errors received |
| 1.3.6.1.4.1.2272.1.12.10.27 | ScalarrcStatBgpRxHdrCodeNoSync | read-only | current | Header Not Synchronized errors received |
| 1.3.6.1.4.1.2272.1.12.10.28 | ScalarrcStatBgpRxHdrCodeInvalidMsgLen | read-only | current | Header Invalid msg len errors received |
| 1.3.6.1.4.1.2272.1.12.10.29 | ScalarrcStatBgpRxHdrCodeInvalidMsgType | read-only | current | Header Invalid msg type errors received |
| 1.3.6.1.4.1.2272.1.12.10.30 | ScalarrcStatBgpRxOpCodeBadVer | read-only | current | Open errors received: Bad Version |
| 1.3.6.1.4.1.2272.1.12.10.31 | ScalarrcStatBgpRxOpCodeBadAs | read-only | current | Open errors received: Bad AS Number |
| 1.3.6.1.4.1.2272.1.12.10.32 | ScalarrcStatBgpRxOpCodeBadRtID | read-only | current | Open errors received: Bad BGP Rtr ID |
| 1.3.6.1.4.1.2272.1.12.10.33 | ScalarrcStatBgpRxOpCodeUnsuppOption | read-only | current | Open errors received: Unsupported Option |
| 1.3.6.1.4.1.2272.1.12.10.34 | ScalarrcStatBgpRxOpCodeAuthFail | read-only | current | Open errors received: Auth Failures |
| 1.3.6.1.4.1.2272.1.12.10.35 | ScalarrcStatBgpRxOpCodeBadHold | read-only | current | Open errors received: Bad Hold Value |
| 1.3.6.1.4.1.2272.1.12.10.36 | ScalarrcStatBgpRxUpdCodeMalformedAttrList | read-only | current | Update errors received:Malformed Attr List |
| 1.3.6.1.4.1.2272.1.12.10.37 | ScalarrcStatBgpRxUpdCodeWelknownAttrUnrecog | read-only | current | Update errors received: Welknown Attr Unrecog |
| 1.3.6.1.4.1.2272.1.12.10.38 | ScalarrcStatBgpRxUpdCodeWelknownAttrMiss | read-only | current | Update errors received: Welknown Attr Missing |
| 1.3.6.1.4.1.2272.1.12.10.39 | ScalarrcStatBgpRxUpdCodeAttrFlagError | read-only | current | Update errors received: Attr Flag Error |
| 1.3.6.1.4.1.2272.1.12.10.40 | ScalarrcStatBgpRxUpdCodeAttrLenError | read-only | current | Update errors received: Attr Len Error |
| 1.3.6.1.4.1.2272.1.12.10.41 | ScalarrcStatBgpRxUpdCodeBadORIGINAttr | read-only | current | Update errors received: Bad ORIGIN Attr |
| 1.3.6.1.4.1.2272.1.12.10.42 | ScalarrcStatBgpRxUpdCodeASRoutingLoop | read-only | current | Update errors received: AS Routing Loop |
| 1.3.6.1.4.1.2272.1.12.10.43 | ScalarrcStatBgpRxUpdCodeBadNHAttr | read-only | current | Update errors received: Bad NEXT-HOP Attr |
| 1.3.6.1.4.1.2272.1.12.10.44 | ScalarrcStatBgpRxUpdCodeOptionalAttrError | read-only | current | Update errors received: Optional Attr Error |
| 1.3.6.1.4.1.2272.1.12.10.45 | ScalarrcStatBgpRxUpdCodeBadNetworkField | read-only | current | Update errors received: Bad Network Field |
| 1.3.6.1.4.1.2272.1.12.10.46 | ScalarrcStatBgpRxUpdCodeMalformedASPath | read-only | current | Update errors received: Malformed AS Path |
| 1.3.6.1.4.1.2272.1.12.10.47 | ScalarrcStatBgpTxECodeHeader | read-only | current | Total Header errors transmitted |
| 1.3.6.1.4.1.2272.1.12.10.48 | ScalarrcStatBgpTxECodeOpen | read-only | current | Total Open errors transmitted |
| 1.3.6.1.4.1.2272.1.12.10.49 | ScalarrcStatBgpTxECodeUpdate | read-only | current | Total Update errors transmitted |
| 1.3.6.1.4.1.2272.1.12.10.50 | ScalarrcStatBgpTxECodeHoldtimer | read-only | current | Total Holdtimer errors transmitted |
| 1.3.6.1.4.1.2272.1.12.10.51 | ScalarrcStatBgpTxECodeFSM | read-only | current | Total FSM errors transmitted |
| 1.3.6.1.4.1.2272.1.12.10.52 | ScalarrcStatBgpTxECodeCease | read-only | current | Total Cease errors transmitted |
| 1.3.6.1.4.1.2272.1.12.10.53 | ScalarrcStatBgpTxHdrCodeNoSync | read-only | current | Header Not Synchronized errors transmitted |
| 1.3.6.1.4.1.2272.1.12.10.54 | ScalarrcStatBgpTxHdrCodeInvalidMsgLen | read-only | current | Header Invalid msg len errors transmitted |
| 1.3.6.1.4.1.2272.1.12.10.55 | ScalarrcStatBgpTxHdrCodeInvalidMsgType | read-only | current | Header Invalid msg type errors transmitted |
| 1.3.6.1.4.1.2272.1.12.10.56 | ScalarrcStatBgpTxOpCodeBadVer | read-only | current | Open errors transmitted: Bad Version |
| 1.3.6.1.4.1.2272.1.12.10.57 | ScalarrcStatBgpTxOpCodeBadAs | read-only | current | Open errors transmitted: Bad AS Number |
| 1.3.6.1.4.1.2272.1.12.10.58 | ScalarrcStatBgpTxOpCodeBadRtID | read-only | current | Open errors transmitted: Bad BGP Rtr ID |
| 1.3.6.1.4.1.2272.1.12.10.59 | ScalarrcStatBgpTxOpCodeUnsuppOption | read-only | current | Open errors transmitted: Unsupported Option |
| 1.3.6.1.4.1.2272.1.12.10.60 | ScalarrcStatBgpTxOpCodeAuthFail | read-only | current | Open errors transmitted: Auth Failures |
| 1.3.6.1.4.1.2272.1.12.10.61 | ScalarrcStatBgpTxOpCodeBadHold | read-only | current | Open errors transmitted: Bad Hold Value |
| 1.3.6.1.4.1.2272.1.12.10.62 | ScalarrcStatBgpTxUpdCodeMalformedAttrList | read-only | current | Update errors transmitted:Malformed Attr List |
| 1.3.6.1.4.1.2272.1.12.10.63 | ScalarrcStatBgpTxUpdCodeWelknownAttrUnrecog | read-only | current | Update errors transmitted: Welknown Attr Unrecog |
| 1.3.6.1.4.1.2272.1.12.10.64 | ScalarrcStatBgpTxUpdCodeWelknownAttrMiss | read-only | current | Update errors transmitted: Welknown Attr Missing |
| 1.3.6.1.4.1.2272.1.12.10.65 | ScalarrcStatBgpTxUpdCodeAttrFlagError | read-only | current | Update errors transmitted: Attr Flag Error |
| 1.3.6.1.4.1.2272.1.12.10.66 | ScalarrcStatBgpTxUpdCodeAttrLenError | read-only | current | Update errors transmitted: Attr Len Error |
| 1.3.6.1.4.1.2272.1.12.10.67 | ScalarrcStatBgpTxUpdCodeBadORIGINAttr | read-only | current | Update errors transmitted: Bad ORIGIN Attr |
| 1.3.6.1.4.1.2272.1.12.10.68 | ScalarrcStatBgpTxUpdCodeASRoutingLoop | read-only | current | Update errors transmitted: AS Routing Loop |
| 1.3.6.1.4.1.2272.1.12.10.69 | ScalarrcStatBgpTxUpdCodeBadNHAttr | read-only | current | Update errors transmitted: Bad NEXT-HOP Attr |
| 1.3.6.1.4.1.2272.1.12.10.70 | ScalarrcStatBgpTxUpdCodeOptionalAttrError | read-only | current | Update errors transmitted: Optional Attr Error |
| 1.3.6.1.4.1.2272.1.12.10.71 | ScalarrcStatBgpTxUpdCodeBadNetworkField | read-only | current | Update errors transmitted: Bad Network Field |
| 1.3.6.1.4.1.2272.1.12.10.72 | ScalarrcStatBgpTxUpdCodeMalformedASPath | read-only | current | Update errors transmitted: Malformed AS Path |
| 1.3.6.1.4.1.2272.1.12.10.73 | ScalarrcStatBgpReset | read-write | current | reset Bgp global stats |
| 1.3.6.1.4.1.2272.1.12.11 | TablercStatBgpPeerTable | not-accessible | current | A table used to store Bgp Peer statistics. |
| 1.3.6.1.4.1.2272.1.12.11.1 | RowrcStatBgpPeerEntry | not-accessible | current | Bgp Peer statistics |
| 1.3.6.1.4.1.2272.1.12.11.1.1 | ColumnrcStatBgpPeerAddr | read-only | current | |
| 1.3.6.1.4.1.2272.1.12.11.1.2 | ColumnrcStatBgpPeerStarts | read-only | current | Number of times peer BGP connection started |
| 1.3.6.1.4.1.2272.1.12.11.1.3 | ColumnrcStatBgpPeerStops | read-only | current | Number of times peer BGP connection stopped |
| 1.3.6.1.4.1.2272.1.12.11.1.4 | ColumnrcStatBgpPeerOpens | read-only | current | Number of times peer opens TCP |
| 1.3.6.1.4.1.2272.1.12.11.1.5 | ColumnrcStatBgpPeerCloses | read-only | current | Number of times peer closes TCP |
| 1.3.6.1.4.1.2272.1.12.11.1.6 | ColumnrcStatBgpPeerFails | read-only | current | Number of times peer TCP attempts failed |
| 1.3.6.1.4.1.2272.1.12.11.1.7 | ColumnrcStatBgpPeerFatals | read-only | current | Number of times peer TCP crashes due to fatal error |
| 1.3.6.1.4.1.2272.1.12.11.1.8 | ColumnrcStatBgpPeerConnExps | read-only | current | Number of times peer TCP retry timer expired |
| 1.3.6.1.4.1.2272.1.12.11.1.9 | ColumnrcStatBgpPeerHoldExps | read-only | current | Number of times peer hold timer expired |
| 1.3.6.1.4.1.2272.1.12.11.1.10 | ColumnrcStatBgpPeerKeepExps | read-only | current | Number of times peer keepalive timer expired |
| 1.3.6.1.4.1.2272.1.12.11.1.11 | ColumnrcStatBgpPeerTxMsgs | read-only | current | Total messages send by the peer |
| 1.3.6.1.4.1.2272.1.12.11.1.12 | ColumnrcStatBgpPeerTxOpens | read-only | current | Opens sent by the peer |
| 1.3.6.1.4.1.2272.1.12.11.1.13 | ColumnrcStatBgpPeerTxKeeps | read-only | current | Keepalives sent by the peer |
| 1.3.6.1.4.1.2272.1.12.11.1.14 | ColumnrcStatBgpPeerTxUpdates | read-only | current | Updates sent by the peer |
| 1.3.6.1.4.1.2272.1.12.11.1.15 | ColumnrcStatBgpPeerTxNotifys | read-only | current | Notifications sent by the peer |
| 1.3.6.1.4.1.2272.1.12.11.1.16 | ColumnrcStatBgpPeerRxMsgs | read-only | current | Total messages received by the peer |
| 1.3.6.1.4.1.2272.1.12.11.1.17 | ColumnrcStatBgpPeerRxInCompPkts | read-only | current | Incomplete message received by the peer |
| 1.3.6.1.4.1.2272.1.12.11.1.18 | ColumnrcStatBgpPeerRxOpens | read-only | current | Opens received by the peer |
| 1.3.6.1.4.1.2272.1.12.11.1.19 | ColumnrcStatBgpPeerRxKeeps | read-only | current | Keepalives received by the peer |
| 1.3.6.1.4.1.2272.1.12.11.1.20 | ColumnrcStatBgpPeerRxUpdates | read-only | current | Updates received by the peer |
| 1.3.6.1.4.1.2272.1.12.11.1.21 | ColumnrcStatBgpPeerRxNotifys | read-only | current | Notifications received by the peer |
| 1.3.6.1.4.1.2272.1.12.11.1.22 | ColumnrcStatBgpPeerBadEvents | read-only | current | Number of invalid events received by the peer |
| 1.3.6.1.4.1.2272.1.12.11.1.23 | ColumnrcStatBgpPeerSyncFails | read-only | current | Number of times FDB sync failed of the peer |
| 1.3.6.1.4.1.2272.1.12.11.1.24 | ColumnrcStatBgpPeerRcvdTooShort | read-only | current | Number of messages recieved by the peer that is too sho rt |
| 1.3.6.1.4.1.2272.1.12.11.1.25 | ColumnrcStatBgpPeerNoMarker | read-only | current | Number of messages without marker recieved by the peer |
| 1.3.6.1.4.1.2272.1.12.11.1.26 | ColumnrcStatBgpPeerDropped | read-only | current | Number of messages the peer has dropped |
| 1.3.6.1.4.1.2272.1.12.11.1.27 | ColumnrcStatBgpPeerBadMsgTypes | read-only | current | Number of messages with invalid message type |
| 1.3.6.1.4.1.2272.1.12.11.1.28 | ColumnrcStatBgpPeerTrEvent | read-only | current | Peer trace event |
| 1.3.6.1.4.1.2272.1.12.11.1.29 | ColumnrcStatBgpPeerTxRoutes | read-only | current | Number of NLRI sent by peer |
| 1.3.6.1.4.1.2272.1.12.11.1.30 | ColumnrcStatBgpPeerRxRoutesAdded | read-only | current | Number of routes added into loc_rib by this peer |
| 1.3.6.1.4.1.2272.1.12.11.1.31 | ColumnrcStatBgpPeerRxRoutesReplaced | read-only | current | Number of routes replaced by the routes received by the peer |
| 1.3.6.1.4.1.2272.1.12.11.1.32 | ColumnrcStatBgpPeerRxNlri | read-only | current | Number of NLRI received by the peer |
| 1.3.6.1.4.1.2272.1.12.11.1.33 | ColumnrcStatBgpPeerRxValidUpdates | read-only | current | Number of valid UPDATEs received by the peer |
| 1.3.6.1.4.1.2272.1.12.11.1.34 | ColumnrcStatBgpPeerRxECodeHeader | read-only | current | Total errors peer received: Header |
| 1.3.6.1.4.1.2272.1.12.11.1.35 | ColumnrcStatBgpPeerRxECodeOpen | read-only | current | Total errors peer received: Open |
| 1.3.6.1.4.1.2272.1.12.11.1.36 | ColumnrcStatBgpPeerRxECodeUpdate | read-only | current | Total errors peer received: Update |
| 1.3.6.1.4.1.2272.1.12.11.1.37 | ColumnrcStatBgpPeerRxECodeHoldtimer | read-only | current | Total errors peer received: Hold |
| 1.3.6.1.4.1.2272.1.12.11.1.38 | ColumnrcStatBgpPeerRxECodeFSM | read-only | current | Total errors peer received: Fsm |
| 1.3.6.1.4.1.2272.1.12.11.1.39 | ColumnrcStatBgpPeerRxECodeCease | read-only | current | Total errors peer received: Cease |
| 1.3.6.1.4.1.2272.1.12.11.1.40 | ColumnrcStatBgpPeerRxHdrCodeNoSync | read-only | current | Header errors peer received: Not Synchronized |
| 1.3.6.1.4.1.2272.1.12.11.1.41 | ColumnrcStatBgpPeerRxHdrCodeInvalidMsgLen | read-only | current | Header errors peer received: Invalid message length |
| 1.3.6.1.4.1.2272.1.12.11.1.42 | ColumnrcStatBgpPeerRxHdrCodeInvalidMsgType | read-only | current | Header errors peer received: Invalid message type |
| 1.3.6.1.4.1.2272.1.12.11.1.43 | ColumnrcStatBgpPeerRxOpCodeBadVer | read-only | current | Open errors peer received: Bad Version |
| 1.3.6.1.4.1.2272.1.12.11.1.44 | ColumnrcStatBgpPeerRxOpCodeBadAs | read-only | current | Open errors peer received: Bad AS number |
| 1.3.6.1.4.1.2272.1.12.11.1.45 | ColumnrcStatBgpPeerRxOpCodeBadRtID | read-only | current | Open errors peer received: Bad BGP ID |
| 1.3.6.1.4.1.2272.1.12.11.1.46 | ColumnrcStatBgpPeerRxOpCodeUnsuppOption | read-only | current | Open errors peer received: Unsupported Options |
| 1.3.6.1.4.1.2272.1.12.11.1.47 | ColumnrcStatBgpPeerRxOpCodeAuthFail | read-only | current | Open errors peer received: Authorization failures |
| 1.3.6.1.4.1.2272.1.12.11.1.48 | ColumnrcStatBgpPeerRxOpCodeBadHold | read-only | current | Open errors peer received: Bad Hold value |
| 1.3.6.1.4.1.2272.1.12.11.1.49 | ColumnrcStatBgpPeerRxUpdCodeMalformedAttrList | read-only | current | Update errors peer received: Malformed Attr List |
| 1.3.6.1.4.1.2272.1.12.11.1.50 | ColumnrcStatBgpPeerRxUpdCodeWelknownAttrUnrecog | read-only | current | Update errors peer received: Malformed Attr List |
| 1.3.6.1.4.1.2272.1.12.11.1.51 | ColumnrcStatBgpPeerRxUpdCodeWelknownAttrMiss | read-only | current | Update errors peer received: Malformed Attr List |
| 1.3.6.1.4.1.2272.1.12.11.1.52 | ColumnrcStatBgpPeerRxUpdCodeAttrFlagError | read-only | current | Update errors peer received: Malformed Attr List |
| 1.3.6.1.4.1.2272.1.12.11.1.53 | ColumnrcStatBgpPeerRxUpdCodeAttrLenError | read-only | current | Update errors peer received: Malformed Attr List |
| 1.3.6.1.4.1.2272.1.12.11.1.54 | ColumnrcStatBgpPeerRxUpdCodeBadORIGINAttr | read-only | current | Update errors peer received: Malformed Attr List |
| 1.3.6.1.4.1.2272.1.12.11.1.55 | ColumnrcStatBgpPeerRxUpdCodeASRoutingLoop | read-only | current | Update errors peer received: Malformed Attr List |
| 1.3.6.1.4.1.2272.1.12.11.1.56 | ColumnrcStatBgpPeerRxUpdCodeBadNHAttr | read-only | current | Update errors peer received: Malformed Attr List |
| 1.3.6.1.4.1.2272.1.12.11.1.57 | ColumnrcStatBgpPeerRxUpdCodeOptionalAttrError | read-only | current | Update errors peer received: Malformed Attr List |
| 1.3.6.1.4.1.2272.1.12.11.1.58 | ColumnrcStatBgpPeerRxUpdCodeBadNetworkField | read-only | current | Update errors peer received: Malformed Attr List |
| 1.3.6.1.4.1.2272.1.12.11.1.59 | ColumnrcStatBgpPeerRxUpdCodeMalformedASPath | read-only | current | Update errors peer received: Malformed Attr List |
| 1.3.6.1.4.1.2272.1.12.11.1.60 | ColumnrcStatBgpPeerTxECodeHeader | read-only | current | Total errors peer received: Header |
| 1.3.6.1.4.1.2272.1.12.11.1.61 | ColumnrcStatBgpPeerTxECodeOpen | read-only | current | Total errors peer received: Open |
| 1.3.6.1.4.1.2272.1.12.11.1.62 | ColumnrcStatBgpPeerTxECodeUpdate | read-only | current | Total errors peer received: Update |
| 1.3.6.1.4.1.2272.1.12.11.1.63 | ColumnrcStatBgpPeerTxECodeHoldtimer | read-only | current | Total errors peer received: Hold |
| 1.3.6.1.4.1.2272.1.12.11.1.64 | ColumnrcStatBgpPeerTxECodeFSM | read-only | current | Total errors peer received: Fsm |
| 1.3.6.1.4.1.2272.1.12.11.1.65 | ColumnrcStatBgpPeerTxECodeCease | read-only | current | Total errors peer received: Cease |
| 1.3.6.1.4.1.2272.1.12.11.1.66 | ColumnrcStatBgpPeerTxHdrCodeNoSync | read-only | current | Header errors peer received: Not Synchronized |
| 1.3.6.1.4.1.2272.1.12.11.1.67 | ColumnrcStatBgpPeerTxHdrCodeInvalidMsgLen | read-only | current | Header errors peer received: Invalid message length |
| 1.3.6.1.4.1.2272.1.12.11.1.68 | ColumnrcStatBgpPeerTxHdrCodeInvalidMsgType | read-only | current | Header errors peer received: Invalid message type |
| 1.3.6.1.4.1.2272.1.12.11.1.69 | ColumnrcStatBgpPeerTxOpCodeBadVer | read-only | current | Open errors peer received: Bad Version |
| 1.3.6.1.4.1.2272.1.12.11.1.70 | ColumnrcStatBgpPeerTxOpCodeBadAs | read-only | current | Open errors peer received: Bad AS number |
| 1.3.6.1.4.1.2272.1.12.11.1.71 | ColumnrcStatBgpPeerTxOpCodeBadRtID | read-only | current | Open errors peer received: Bad BGP ID |
| 1.3.6.1.4.1.2272.1.12.11.1.72 | ColumnrcStatBgpPeerTxOpCodeUnsuppOption | read-only | current | Open errors peer received: Unsupported Options |
| 1.3.6.1.4.1.2272.1.12.11.1.73 | ColumnrcStatBgpPeerTxOpCodeAuthFail | read-only | current | Open errors peer received: Authorization failures |
| 1.3.6.1.4.1.2272.1.12.11.1.74 | ColumnrcStatBgpPeerTxOpCodeBadHold | read-only | current | Open errors peer received: Bad Hold value |
| 1.3.6.1.4.1.2272.1.12.11.1.75 | ColumnrcStatBgpPeerTxUpdCodeMalformedAttrList | read-only | current | Update errors peer received: Malformed Attr List |
| 1.3.6.1.4.1.2272.1.12.11.1.76 | ColumnrcStatBgpPeerTxUpdCodeWelknownAttrUnrecog | read-only | current | Update errors peer received: Malformed Attr List |
| 1.3.6.1.4.1.2272.1.12.11.1.77 | ColumnrcStatBgpPeerTxUpdCodeWelknownAttrMiss | read-only | current | Update errors peer received: Malformed Attr List |
| 1.3.6.1.4.1.2272.1.12.11.1.78 | ColumnrcStatBgpPeerTxUpdCodeAttrFlagError | read-only | current | Update errors peer received: Malformed Attr List |
| 1.3.6.1.4.1.2272.1.12.11.1.79 | ColumnrcStatBgpPeerTxUpdCodeAttrLenError | read-only | current | Update errors peer received: Malformed Attr List |
| 1.3.6.1.4.1.2272.1.12.11.1.80 | ColumnrcStatBgpPeerTxUpdCodeBadORIGINAttr | read-only | current | Update errors peer received: Malformed Attr List |
| 1.3.6.1.4.1.2272.1.12.11.1.81 | ColumnrcStatBgpPeerTxUpdCodeASRoutingLoop | read-only | current | Update errors peer received: Malformed Attr List |
| 1.3.6.1.4.1.2272.1.12.11.1.82 | ColumnrcStatBgpPeerTxUpdCodeBadNHAttr | read-only | current | Update errors peer received: Malformed Attr List |
| 1.3.6.1.4.1.2272.1.12.11.1.83 | ColumnrcStatBgpPeerTxUpdCodeOptionalAttrError | read-only | current | Update errors peer received: Malformed Attr List |
| 1.3.6.1.4.1.2272.1.12.11.1.84 | ColumnrcStatBgpPeerTxUpdCodeBadNetworkField | read-only | current | Update errors peer received: Malformed Attr List |
| 1.3.6.1.4.1.2272.1.12.11.1.85 | ColumnrcStatBgpPeerTxUpdCodeMalformedASPath | read-only | current | Update errors peer received: Malformed Attr List |
| 1.3.6.1.4.1.2272.1.12.11.1.86 | ColumnrcStatBgpPeerReset | read-write | current | reset peer stats |
| 1.3.6.1.4.1.2272.1.12.13 | TablercStatBgpPeerAfTable | not-accessible | current | A table used to store v4/v6 Bgp Peer statistics. |
| 1.3.6.1.4.1.2272.1.12.13.1 | RowrcStatBgpPeerAfEntry | not-accessible | current | AF independent Bgp Peer statistics |
| 1.3.6.1.4.1.2272.1.12.13.1.1 | ColumnrcStatBgpPeerAfAddrType | not-accessible | current | Inet address type of the AF independent peer |
| 1.3.6.1.4.1.2272.1.12.13.1.2 | ColumnrcStatBgpPeerAfAddr | not-accessible | current | Inet address of the AF independent peer |
| 1.3.6.1.4.1.2272.1.12.13.1.3 | ColumnrcStatBgpPeerAfStarts | read-only | current | Number of times peer BGP connection started |
| 1.3.6.1.4.1.2272.1.12.13.1.4 | ColumnrcStatBgpPeerAfStops | read-only | current | Number of times peer BGP connection stopped |
| 1.3.6.1.4.1.2272.1.12.13.1.5 | ColumnrcStatBgpPeerAfOpens | read-only | current | Number of times peer opens TCP |
| 1.3.6.1.4.1.2272.1.12.13.1.6 | ColumnrcStatBgpPeerAfCloses | read-only | current | Number of times peer closes TCP |
| 1.3.6.1.4.1.2272.1.12.13.1.7 | ColumnrcStatBgpPeerAfFails | read-only | current | Number of times peer TCP attempts failed |
| 1.3.6.1.4.1.2272.1.12.13.1.8 | ColumnrcStatBgpPeerAfFatals | read-only | current | Number of times peer TCP crashes due to fatal error |
| 1.3.6.1.4.1.2272.1.12.13.1.9 | ColumnrcStatBgpPeerAfConnExps | read-only | current | Number of times peer TCP retry timer expired |
| 1.3.6.1.4.1.2272.1.12.13.1.10 | ColumnrcStatBgpPeerAfHoldExps | read-only | current | Number of times peer hold timer expired |
| 1.3.6.1.4.1.2272.1.12.13.1.11 | ColumnrcStatBgpPeerAfKeepExps | read-only | current | Number of times peer keepalive timer expired |
| 1.3.6.1.4.1.2272.1.12.13.1.12 | ColumnrcStatBgpPeerAfTxMsgs | read-only | current | Total messages send by the peer |
| 1.3.6.1.4.1.2272.1.12.13.1.13 | ColumnrcStatBgpPeerAfTxOpens | read-only | current | Opens sent by the peer |
| 1.3.6.1.4.1.2272.1.12.13.1.14 | ColumnrcStatBgpPeerAfTxKeeps | read-only | current | Keepalives sent by the peer |
| 1.3.6.1.4.1.2272.1.12.13.1.15 | ColumnrcStatBgpPeerAfTxUpdates | read-only | current | Updates sent by the peer |
| 1.3.6.1.4.1.2272.1.12.13.1.16 | ColumnrcStatBgpPeerAfTxNotifys | read-only | current | Notifications sent by the peer |
| 1.3.6.1.4.1.2272.1.12.13.1.17 | ColumnrcStatBgpPeerAfRxMsgs | read-only | current | Total messages received by the peer |
| 1.3.6.1.4.1.2272.1.12.13.1.18 | ColumnrcStatBgpPeerAfRxInCompPkts | read-only | current | Incomplete message received by the peer |
| 1.3.6.1.4.1.2272.1.12.13.1.19 | ColumnrcStatBgpPeerAfRxOpens | read-only | current | Opens received by the peer |
| 1.3.6.1.4.1.2272.1.12.13.1.20 | ColumnrcStatBgpPeerAfRxKeeps | read-only | current | Keepalives received by the peer |
| 1.3.6.1.4.1.2272.1.12.13.1.21 | ColumnrcStatBgpPeerAfRxUpdates | read-only | current | Updates received by the peer |
| 1.3.6.1.4.1.2272.1.12.13.1.22 | ColumnrcStatBgpPeerAfRxNotifys | read-only | current | Notifications received by the peer |
| 1.3.6.1.4.1.2272.1.12.13.1.23 | ColumnrcStatBgpPeerAfBadEvents | read-only | current | Number of invalid events received by the peer |
| 1.3.6.1.4.1.2272.1.12.13.1.24 | ColumnrcStatBgpPeerAfSyncFails | read-only | current | Number of times FDB sync failed of the peer |
| 1.3.6.1.4.1.2272.1.12.13.1.25 | ColumnrcStatBgpPeerAfRcvdTooShort | read-only | current | Number of messages recieved by the peer that is too sho rt |
| 1.3.6.1.4.1.2272.1.12.13.1.26 | ColumnrcStatBgpPeerAfNoMarker | read-only | current | Number of messages without marker recieved by the peer |
| 1.3.6.1.4.1.2272.1.12.13.1.27 | ColumnrcStatBgpPeerAfDropped | read-only | current | Number of messages the peer has dropped |
| 1.3.6.1.4.1.2272.1.12.13.1.28 | ColumnrcStatBgpPeerAfBadMsgTypes | read-only | current | Number of messages with invalid message type |
| 1.3.6.1.4.1.2272.1.12.13.1.29 | ColumnrcStatBgpPeerAfTrEvent | read-only | current | Peer trace event |
| 1.3.6.1.4.1.2272.1.12.13.1.30 | ColumnrcStatBgpPeerAfTxRoutes | read-only | current | Number of NLRI sent by peer |
| 1.3.6.1.4.1.2272.1.12.13.1.31 | ColumnrcStatBgpPeerAfRxRoutesAdded | read-only | current | Number of routes added into loc_rib by this peer |
| 1.3.6.1.4.1.2272.1.12.13.1.32 | ColumnrcStatBgpPeerAfRxRoutesReplaced | read-only | current | Number of routes replaced by the routes received by the peer |
| 1.3.6.1.4.1.2272.1.12.13.1.33 | ColumnrcStatBgpPeerAfRxNlri | read-only | current | Number of NLRI received by the peer |
| 1.3.6.1.4.1.2272.1.12.13.1.34 | ColumnrcStatBgpPeerAfRxValidUpdates | read-only | current | Number of valid UPDATEs received by the peer |
| 1.3.6.1.4.1.2272.1.12.13.1.35 | ColumnrcStatBgpPeerAfRxECodeHeader | read-only | current | Total errors peer received: Header |
| 1.3.6.1.4.1.2272.1.12.13.1.36 | ColumnrcStatBgpPeerAfRxECodeOpen | read-only | current | Total errors peer received: Open |
| 1.3.6.1.4.1.2272.1.12.13.1.37 | ColumnrcStatBgpPeerAfRxECodeUpdate | read-only | current | Total errors peer received: Update |
| 1.3.6.1.4.1.2272.1.12.13.1.38 | ColumnrcStatBgpPeerAfRxECodeHoldtimer | read-only | current | Total errors peer received: Hold |
| 1.3.6.1.4.1.2272.1.12.13.1.39 | ColumnrcStatBgpPeerAfRxECodeFSM | read-only | current | Total errors peer received: Fsm |
| 1.3.6.1.4.1.2272.1.12.13.1.40 | ColumnrcStatBgpPeerAfRxECodeCease | read-only | current | Total errors peer received: Cease |
| 1.3.6.1.4.1.2272.1.12.13.1.41 | ColumnrcStatBgpPeerAfRxHdrCodeNoSync | read-only | current | Header errors peer received: Not Synchronized |
| 1.3.6.1.4.1.2272.1.12.13.1.42 | ColumnrcStatBgpPeerAfRxHdrCodeInvalidMsgLen | read-only | current | Header errors peer received: Invalid message length |
| 1.3.6.1.4.1.2272.1.12.13.1.43 | ColumnrcStatBgpPeerAfRxHdrCodeInvalidMsgType | read-only | current | Header errors peer received: Invalid message type |
| 1.3.6.1.4.1.2272.1.12.13.1.44 | ColumnrcStatBgpPeerAfRxOpCodeBadVer | read-only | current | Open errors peer received: Bad Version |
| 1.3.6.1.4.1.2272.1.12.13.1.45 | ColumnrcStatBgpPeerAfRxOpCodeBadAs | read-only | current | Open errors peer received: Bad AS number |
| 1.3.6.1.4.1.2272.1.12.13.1.46 | ColumnrcStatBgpPeerAfRxOpCodeBadRtID | read-only | current | Open errors peer received: Bad BGP ID |
| 1.3.6.1.4.1.2272.1.12.13.1.47 | ColumnrcStatBgpPeerAfRxOpCodeUnsuppOption | read-only | current | Open errors peer received: Unsupported Options |
| 1.3.6.1.4.1.2272.1.12.13.1.48 | ColumnrcStatBgpPeerAfRxOpCodeAuthFail | read-only | current | Open errors peer received: Authorization failures |
| 1.3.6.1.4.1.2272.1.12.13.1.49 | ColumnrcStatBgpPeerAfRxOpCodeBadHold | read-only | current | Open errors peer received: Bad Hold value |
| 1.3.6.1.4.1.2272.1.12.13.1.50 | ColumnrcStatBgpPeerAfRxUpdCodeMalformedAttrList | read-only | current | Update errors peer received: Malformed Attr List |
| 1.3.6.1.4.1.2272.1.12.13.1.51 | ColumnrcStatBgpPeerAfRxUpdCodeWelknownAttrUnrecog | read-only | current | Update errors peer received: Malformed Attr List |
| 1.3.6.1.4.1.2272.1.12.13.1.52 | ColumnrcStatBgpPeerAfRxUpdCodeWelknownAttrMiss | read-only | current | Update errors peer received: Malformed Attr List |
| 1.3.6.1.4.1.2272.1.12.13.1.53 | ColumnrcStatBgpPeerAfRxUpdCodeAttrFlagError | read-only | current | Update errors peer received: Malformed Attr List |
| 1.3.6.1.4.1.2272.1.12.13.1.54 | ColumnrcStatBgpPeerAfRxUpdCodeAttrLenError | read-only | current | Update errors peer received: Malformed Attr List |
| 1.3.6.1.4.1.2272.1.12.13.1.55 | ColumnrcStatBgpPeerAfRxUpdCodeBadORIGINAttr | read-only | current | Update errors peer received: Malformed Attr List |
| 1.3.6.1.4.1.2272.1.12.13.1.56 | ColumnrcStatBgpPeerAfRxUpdCodeASRoutingLoop | read-only | current | Update errors peer received: Malformed Attr List |
| 1.3.6.1.4.1.2272.1.12.13.1.57 | ColumnrcStatBgpPeerAfRxUpdCodeBadNHAttr | read-only | current | Update errors peer received: Malformed Attr List |
| 1.3.6.1.4.1.2272.1.12.13.1.58 | ColumnrcStatBgpPeerAfRxUpdCodeOptionalAttrError | read-only | current | Update errors peer received: Malformed Attr List |
| 1.3.6.1.4.1.2272.1.12.13.1.59 | ColumnrcStatBgpPeerAfRxUpdCodeBadNetworkField | read-only | current | Update errors peer received: Malformed Attr List |
| 1.3.6.1.4.1.2272.1.12.13.1.60 | ColumnrcStatBgpPeerAfRxUpdCodeMalformedASPath | read-only | current | Update errors peer received: Malformed Attr List |
| 1.3.6.1.4.1.2272.1.12.13.1.61 | ColumnrcStatBgpPeerAfTxECodeHeader | read-only | current | Total errors peer received: Header |
| 1.3.6.1.4.1.2272.1.12.13.1.62 | ColumnrcStatBgpPeerAfTxECodeOpen | read-only | current | Total errors peer received: Open |
| 1.3.6.1.4.1.2272.1.12.13.1.63 | ColumnrcStatBgpPeerAfTxECodeUpdate | read-only | current | Total errors peer received: Update |
| 1.3.6.1.4.1.2272.1.12.13.1.64 | ColumnrcStatBgpPeerAfTxECodeHoldtimer | read-only | current | Total errors peer received: Hold |
| 1.3.6.1.4.1.2272.1.12.13.1.65 | ColumnrcStatBgpPeerAfTxECodeFSM | read-only | current | Total errors peer received: Fsm |
| 1.3.6.1.4.1.2272.1.12.13.1.66 | ColumnrcStatBgpPeerAfTxECodeCease | read-only | current | Total errors peer received: Cease |
| 1.3.6.1.4.1.2272.1.12.13.1.67 | ColumnrcStatBgpPeerAfTxHdrCodeNoSync | read-only | current | Header errors peer received: Not Synchronized |
| 1.3.6.1.4.1.2272.1.12.13.1.68 | ColumnrcStatBgpPeerAfTxHdrCodeInvalidMsgLen | read-only | current | Header errors peer received: Invalid message length |
| 1.3.6.1.4.1.2272.1.12.13.1.69 | ColumnrcStatBgpPeerAfTxHdrCodeInvalidMsgType | read-only | current | Header errors peer received: Invalid message type |
| 1.3.6.1.4.1.2272.1.12.13.1.70 | ColumnrcStatBgpPeerAfTxOpCodeBadVer | read-only | current | Open errors peer received: Bad Version |
| 1.3.6.1.4.1.2272.1.12.13.1.71 | ColumnrcStatBgpPeerAfTxOpCodeBadAs | read-only | current | Open errors peer received: Bad AS number |
| 1.3.6.1.4.1.2272.1.12.13.1.72 | ColumnrcStatBgpPeerAfTxOpCodeBadRtID | read-only | current | Open errors peer received: Bad BGP ID |
| 1.3.6.1.4.1.2272.1.12.13.1.73 | ColumnrcStatBgpPeerAfTxOpCodeUnsuppOption | read-only | current | Open errors peer received: Unsupported Options |
| 1.3.6.1.4.1.2272.1.12.13.1.74 | ColumnrcStatBgpPeerAfTxOpCodeAuthFail | read-only | current | Open errors peer received: Authorization failures |
| 1.3.6.1.4.1.2272.1.12.13.1.75 | ColumnrcStatBgpPeerAfTxOpCodeBadHold | read-only | current | Open errors peer received: Bad Hold value |
| 1.3.6.1.4.1.2272.1.12.13.1.76 | ColumnrcStatBgpPeerAfTxUpdCodeMalformedAttrList | read-only | current | Update errors peer received: Malformed Attr List |
| 1.3.6.1.4.1.2272.1.12.13.1.77 | ColumnrcStatBgpPeerAfTxUpdCodeWelknownAttrUnrecog | read-only | current | Update errors peer received: Malformed Attr List |
| 1.3.6.1.4.1.2272.1.12.13.1.78 | ColumnrcStatBgpPeerAfTxUpdCodeWelknownAttrMiss | read-only | current | Update errors peer received: Malformed Attr List |
| 1.3.6.1.4.1.2272.1.12.13.1.79 | ColumnrcStatBgpPeerAfTxUpdCodeAttrFlagError | read-only | current | Update errors peer received: Malformed Attr List |
| 1.3.6.1.4.1.2272.1.12.13.1.80 | ColumnrcStatBgpPeerAfTxUpdCodeAttrLenError | read-only | current | Update errors peer received: Malformed Attr List |
| 1.3.6.1.4.1.2272.1.12.13.1.81 | ColumnrcStatBgpPeerAfTxUpdCodeBadORIGINAttr | read-only | current | Update errors peer received: Malformed Attr List |
| 1.3.6.1.4.1.2272.1.12.13.1.82 | ColumnrcStatBgpPeerAfTxUpdCodeASRoutingLoop | read-only | current | Update errors peer received: Malformed Attr List |
| 1.3.6.1.4.1.2272.1.12.13.1.83 | ColumnrcStatBgpPeerAfTxUpdCodeBadNHAttr | read-only | current | Update errors peer received: Malformed Attr List |
| 1.3.6.1.4.1.2272.1.12.13.1.84 | ColumnrcStatBgpPeerAfTxUpdCodeOptionalAttrError | read-only | current | Update errors peer received: Malformed Attr List |
| 1.3.6.1.4.1.2272.1.12.13.1.85 | ColumnrcStatBgpPeerAfTxUpdCodeBadNetworkField | read-only | current | Update errors peer received: Malformed Attr List |
| 1.3.6.1.4.1.2272.1.12.13.1.86 | ColumnrcStatBgpPeerAfTxUpdCodeMalformedASPath | read-only | current | Update errors peer received: Malformed Attr List |
| 1.3.6.1.4.1.2272.1.12.13.1.87 | ColumnrcStatBgpPeerAfReset | read-create | current | reset peer stats |
| 1.3.6.1.4.1.2272.1.13 | NodercStg | |||
| 1.3.6.1.4.1.2272.1.13.1 | ScalarrcStgMaxStgs | read-write | current | The maximum number of spanning tree groups this device can support concurrently. |
| 1.3.6.1.4.1.2272.1.13.2 | ScalarrcStgNumStgs | read-only | current | The number of spanning tree groups that are currently defined. |
| 1.3.6.1.4.1.2272.1.13.3 | ScalarrcStgUnassignedPorts | read-only | current | A bitfield used to identify which ports in the system currently not assigned to any STG. The bitfield is 32 octets long representing ports 0 to 255 (inclusive). |
| 1.3.6.1.4.1.2272.1.13.4 | TablercStgTable | not-accessible | current | A table used to store Spanning Tree Group (STG) information. Each row in the table specifies a different STG in the device. |
| 1.3.6.1.4.1.2272.1.13.4.1 | RowrcStgEntry | not-accessible | current | STG attributes |
| 1.3.6.1.4.1.2272.1.13.4.1.1 | ColumnrcStgId | read-only | current | An identifier used to identify a STG in the device. |
| 1.3.6.1.4.1.2272.1.13.4.1.2 | ColumnrcStgTaggedBpduAddress | read-write | current | The MAC address to be assigned to the destination mac address field in tagged BPDUs. The default address is the well known multicast group address 01-80-c2-00-… |
| 1.3.6.1.4.1.2272.1.13.4.1.3 | ColumnrcStgTaggedBpduVlanId | read-write | current | The VLAN ID to be used for tagging BPDUs. |
| 1.3.6.1.4.1.2272.1.13.4.1.4 | ColumnrcStgBridgeAddress | read-only | current | The MAC address used by this bridge when it must be referred to in a unique fashion. It is recommended that this be the numerically smallest MAC address of all… |
| 1.3.6.1.4.1.2272.1.13.4.1.5 | ColumnrcStgNumPorts | read-only | current | The number of ports controlled by this bridging entity. |
| 1.3.6.1.4.1.2272.1.13.4.1.6 | ColumnrcStgProtocolSpecification | read-only | current | An indication of what version of the Spanning Tree Protocol is being run. The value 'decLb100(2)' indicates the DEC LANbridge 100 Spanning Tree protocol. IEEE … |
| 1.3.6.1.4.1.2272.1.13.4.1.7 | ColumnrcStgPriority | read-write | current | The value of the write-able portion of the Bridge ID, i.e., the first two octets of the (8 octet long) Bridge ID. The other (last) 6 octets of the Bridge ID ar… |
| 1.3.6.1.4.1.2272.1.13.4.1.8 | ColumnrcStgTimeSinceTopologyChange | read-only | current | The time (in hundredths of a second) since the last time a topology change was detected by the bridge entity. |
| 1.3.6.1.4.1.2272.1.13.4.1.9 | ColumnrcStgTopChanges | read-only | current | The total number of topology changes detected by this bridge since the management entity was last reset or initialized. |
| 1.3.6.1.4.1.2272.1.13.4.1.10 | ColumnrcStgDesignatedRoot | read-only | current | The bridge identifier of the root of the spanning tree as determined by the Spanning Tree Protocol as executed by this node. This value is used as the Root Ide… |
| 1.3.6.1.4.1.2272.1.13.4.1.11 | ColumnrcStgRootCost | read-only | current | The cost of the path to the root as seen from this bridge. |
| 1.3.6.1.4.1.2272.1.13.4.1.12 | ColumnrcStgRootPort | read-only | current | The port number of the port which offers the lowest cost path from this bridge to the root bridge. |
| 1.3.6.1.4.1.2272.1.13.4.1.13 | ColumnrcStgMaxAge | read-only | current | The maximum age of Spanning Tree Protocol information learned from the network on any port before it is discarded, in units of hundredths of a second. This is … |
| 1.3.6.1.4.1.2272.1.13.4.1.14 | ColumnrcStgHelloTime | read-only | current | The amount of time between the transmission of Configuration bridge PDUs by this node on any port when it is the root of the spanning tree or trying to become … |
| 1.3.6.1.4.1.2272.1.13.4.1.15 | ColumnrcStgHoldTime | read-only | current | This time value determines the interval length during which no more than two Configuration bridge PDUs shall be transmitted by this node, in units of hundredth… |
| 1.3.6.1.4.1.2272.1.13.4.1.16 | ColumnrcStgForwardDelay | read-only | current | This time value, measured in units of hundredths of a second, controls how fast a port changes its spanning state when moving towards the Forwarding state. The… |
| 1.3.6.1.4.1.2272.1.13.4.1.17 | ColumnrcStgBridgeMaxAge | read-write | current | The value that all bridges use for MaxAge when this bridge is acting as the root. Note that 802.1D-1990 specifies that the range for this parameter is related … |
| 1.3.6.1.4.1.2272.1.13.4.1.18 | ColumnrcStgBridgeHelloTime | read-write | current | The value that all bridges use for HelloTime when this bridge is acting as the root. The granularity of this timer is specified by 802.1D- 1990 to be 1 second.… |
| 1.3.6.1.4.1.2272.1.13.4.1.19 | ColumnrcStgBridgeForwardDelay | read-write | current | The value that all bridges use for ForwardDelay when this bridge is acting as the root. Note that 802.1D-1990 specifies that the range for this parameter is re… |
| 1.3.6.1.4.1.2272.1.13.4.1.20 | ColumnrcStgEnableStp | read-write | current | Indicate whether the spanning tree protocol should be active in this STG. |
| 1.3.6.1.4.1.2272.1.13.4.1.21 | ColumnrcStgStpTrapEnable | read-write | current | Indicate whether traps relating to the spanning tree protocol should be sent for this STG. |
| 1.3.6.1.4.1.2272.1.13.4.1.22 | ColumnrcStgPortMembers | read-write | current | A bitfield used to identify which ports in the system are members this STG. The bitfield is 104 octets long representing ports 64 (1/1) to 831 (12/68) (inclusi… |
| 1.3.6.1.4.1.2272.1.13.4.1.23 | ColumnrcStgRowStatus | read-write | current | Row status. |
| 1.3.6.1.4.1.2272.1.13.4.1.24 | ColumnrcStgPortStpState | read-only | current | Every 2 bitfields used to identify a port state in this STG. Port state is cataloged as non-stp(0), blocking(1), learning(2), and forwarding(3). |
| 1.3.6.1.4.1.2272.1.13.4.1.25 | ColumnrcStgType | read-write | current | Type of Stg. |
| 1.3.6.1.4.1.2272.1.13.4.1.26 | ColumnrcStgNtStgEnable | read-write | current | Indicates whether this STG is Operating in Nortel Mode or in Cisco Mode. true = Nortel Mode false = Cisco Mode. |
| 1.3.6.1.4.1.2272.1.13.4.1.27 | ColumnrcStgLPortMembers | read-only | current | A bitfield used to identify which logical ports (for example, WLAN tunnels) in the system are members of this STG. The bitfield is 256 octets long representing… |
| 1.3.6.1.4.1.2272.1.13.5 | TablercStgPortTable | not-accessible | current | A table used to store Spanning Tree Group (STG) port related information. If a port is associated with more than one STGs, the port will have one entry in this… |
| 1.3.6.1.4.1.2272.1.13.5.1 | RowrcStgPortEntry | not-accessible | current | STG Port attributes |
| 1.3.6.1.4.1.2272.1.13.5.1.1 | ColumnrcStgPort | read-only | current | The port number of the port for which this entry contains Spanning Tree Protocol management information. |
| 1.3.6.1.4.1.2272.1.13.5.1.2 | ColumnrcStgPortStgId | read-only | current | The STG identifier this port is assigned to. |
| 1.3.6.1.4.1.2272.1.13.5.1.3 | ColumnrcStgPortPriority | read-write | current | The value of the priority field which is contained in the first (in network byte order) octet of the (2 octet long) Port ID. The other octet of the Port ID is … |
| 1.3.6.1.4.1.2272.1.13.5.1.4 | ColumnrcStgPortState | read-only | current | The port's current state as defined by application of the Spanning Tree Protocol. This state controls what action a port takes on reception of a frame. If the … |
| 1.3.6.1.4.1.2272.1.13.5.1.5 | ColumnrcStgPortEnableStp | read-write | current | The enabled/disabled status of the port. |
| 1.3.6.1.4.1.2272.1.13.5.1.6 | ColumnrcStgPortFastStart | read-write | current | When this flag is set, the port is moved straight to the forwarding(5) state upon being enabled. |
| 1.3.6.1.4.1.2272.1.13.5.1.7 | ColumnrcStgPortPathCost | read-write | current | The contribution of this port to the path cost of paths towards the spanning tree root which include this port. 802.1D-1990 recommends that the default value o… |
| 1.3.6.1.4.1.2272.1.13.5.1.8 | ColumnrcStgPortDesignatedRoot | read-only | current | The unique Bridge Identifier of the Bridge recorded as the Root in the Configuration BPDUs transmitted by the Designated Bridge for the segment to which the po… |
| 1.3.6.1.4.1.2272.1.13.5.1.9 | ColumnrcStgPortDesignatedCost | read-only | current | The path cost of the Designated Port of the segment connected to this port. This value is compared to the Root Path Cost field in received bridge PDUs. |
| 1.3.6.1.4.1.2272.1.13.5.1.10 | ColumnrcStgPortDesignatedBridge | read-only | current | The Bridge Identifier of the bridge which this port considers to be the Designated Bridge for this port's segment. |
| 1.3.6.1.4.1.2272.1.13.5.1.11 | ColumnrcStgPortDesignatedPort | read-only | current | The Port Identifier of the port on the Designated Bridge for this port's segment. |
| 1.3.6.1.4.1.2272.1.13.5.1.12 | ColumnrcStgPortForwardTransitions | read-only | current | The number of times this port has transitioned from the Learning state to the Forwarding state. |
| 1.3.6.1.4.1.2272.1.13.5.1.13 | ColumnrcStgPortInConfigBpdus | read-only | current | The number of Config BPUDs received by this port. |
| 1.3.6.1.4.1.2272.1.13.5.1.14 | ColumnrcStgPortInTcnBpdus | read-only | current | The number of Topology Change Notification BPUDs received by this port. |
| 1.3.6.1.4.1.2272.1.13.5.1.15 | ColumnrcStgPortInBadBpdus | read-only | current | The number of Bad BPUDs received by this port. |
| 1.3.6.1.4.1.2272.1.13.5.1.16 | ColumnrcStgPortOutConfigBpdus | read-only | current | The number of Config BPUDs transmitted by this port. |
| 1.3.6.1.4.1.2272.1.13.5.1.17 | ColumnrcStgPortOutTcnBpdus | read-only | current | The number of Topology Change Notification BPUDs transmitted by this port. |
| 1.3.6.1.4.1.2272.1.13.5.1.18 | ColumnrcStgPortRowStatus | read-write | current | Row status. |
| 1.3.6.1.4.1.2272.1.13.5.1.19 | ColumnrcStgPortChangeDetection | read-write | current | If disabled, topology change notifications are not sent for the port. |
| 1.3.6.1.4.1.2272.1.13.5.1.20 | ColumnrcStgPortPathCost32 | read-write | current | The contribution of this port to the path cost of paths towards the spanning tree root which include this port. 802.1D-1998 recommends that the default value o… |
| 1.3.6.1.4.1.2272.1.13.5.1.21 | ColumnrcStgPortAdminPathCost | read-write | current | The administrative value of rcStgPortPathCost. This is the value that has been configured by the user, or 0 if there is no user-configured value. Note that a S… |
| 1.3.6.1.4.1.2272.1.13.5.1.22 | ColumnrcStgPortAdminPathCost32 | read-write | current | The administrative value of rcStgPortPathCost32. This is the value that has been configured by the user, or 0 if there is no user-configured value. Note that a… |
| 1.3.6.1.4.1.2272.1.13.6 | ScalarrcStgNotAllowedPorts | read-only | current | A bitfield used to identify which ports in the system that cannot be assigned to any STG (i.e., which ports are single routable ports). The bitfield is 32 octe… |
| 1.3.6.1.4.1.2272.1.14 | NodercBridge | |||
| 1.3.6.1.4.1.2272.1.14.1 | TablercBridgeFdbTable | not-accessible | obsolete | This table is an replacement to the standard dot1dTpFdbTable in rfc1493. |
| 1.3.6.1.4.1.2272.1.14.1.1 | RowrcBridgeFdbEntry | not-accessible | obsolete | Information about a specific unicast MAC address for which the bridge has some forwarding information. |
| 1.3.6.1.4.1.2272.1.14.1.1.1 | ColumnrcBridgeFdbStatus | read-only | obsolete | This object indicates the status of this entry. |
| 1.3.6.1.4.1.2272.1.14.1.1.2 | ColumnrcBridgeFdbAddress | read-only | obsolete | A unicast MAC address for which the bridge has forwarding and/or filtering information. |
| 1.3.6.1.4.1.2272.1.14.1.1.3 | ColumnrcBridgeFdbPort | read-only | obsolete | Either the value '0', or the port number of the port on which a frame having a source address equal to the value of the corresponding instance of rcBridgeFdbAd… |
| 1.3.6.1.4.1.2272.1.14.1.1.4 | ColumnrcBridgeFdbMonitor | read-write | obsolete | Used to indicate whether monitoring should be performed on this unicast MAC address. If monitoring is enabled, any packet received with a matching destination … |
| 1.3.6.1.4.1.2272.1.14.1.1.5 | ColumnrcBridgeFdbPriority | read-write | obsolete | Used to indicate the priority of the incoming frames with this destination Mac Address. |
| 1.3.6.1.4.1.2272.1.14.1.1.6 | ColumnrcBridgeFdbQosLevel | read-write | obsolete | Used to indicate the qos level of the incoming frames with this destination Mac Address. |
| 1.3.6.1.4.1.2272.1.14.1.1.7 | ColumnrcBridgeFdbSmltRemote | read-only | obsolete | A MAC address indicate for remote learnt, either local or remote. |
| 1.3.6.1.4.1.2272.1.14.1.1.8 | ColumnrcBridgeFdbVlanId | read-only | obsolete | |
| 1.3.6.1.4.1.2272.1.14.2 | ScalarrcBridgeFdbTblSize | read-only | current | Used to indicate the number of entries in the bridge forwarding database table. |
| 1.3.6.1.4.1.2272.1.14.3 | TablercBridgeStaticTable | not-accessible | current | This table is a proprietary replacement to the standard dot1dStaticTable in rfc1493. |
| 1.3.6.1.4.1.2272.1.14.3.1 | RowrcBridgeStaticEntry | not-accessible | current | A table containing forwarding information about unicast entries configured into the bridge by management. This information is used by the transparent bridging … |
| 1.3.6.1.4.1.2272.1.14.3.1.1 | ColumnrcBridgeStaticAddress | read-only | current | The MAC address of this entry. |
| 1.3.6.1.4.1.2272.1.14.3.1.2 | ColumnrcBridgeStaticPort | read-only | current | Port on which the MAC address is found. |
| 1.3.6.1.4.1.2272.1.14.3.1.3 | ColumnrcBridgeStaticMonitor | read-write | current | Used to indicate whether monitoring should be performed on incoming packets that match this entry. |
| 1.3.6.1.4.1.2272.1.14.3.1.4 | ColumnrcBridgeStaticPriority | read-write | obsolete | Used to indicate forwarding priority of incoming packets that match this entry. |
| 1.3.6.1.4.1.2272.1.14.3.1.5 | ColumnrcBridgeStaticStatus | read-write | current | This object indicates the status of this entry. The default value is permanent(3). |
| 1.3.6.1.4.1.2272.1.14.3.1.6 | ColumnrcBridgeStaticQosLevel | read-write | current | Used to indicate the qos level. |
| 1.3.6.1.4.1.2272.1.14.3.1.7 | ColumnrcBridgeStaticVlanId | read-only | current | |
| 1.3.6.1.4.1.2272.1.14.4 | ScalarrcBridgeStaticTblSize | read-only | current | Used to indicate the number of entries in the bridge static table. |
| 1.3.6.1.4.1.2272.1.14.5 | TablercBridgeFilterTable | not-accessible | current | This table is a proprietary replacement to the standard dot1dStaticTable (Filtering information) in rfc1493. |
| 1.3.6.1.4.1.2272.1.14.5.1 | RowrcBridgeFilterEntry | not-accessible | current | A table containing filtering information configured into the bridge by management specifying a dest- ination address on a specific port and a set of incoming p… |
| 1.3.6.1.4.1.2272.1.14.5.1.1 | ColumnrcBridgeFilterAddress | read-only | current | The MAC address of this entry. This address is used to match the destination address of incoming packets. |
| 1.3.6.1.4.1.2272.1.14.5.1.2 | ColumnrcBridgeFilterPort | read-only | current | Port on which this MAC address is found. |
| 1.3.6.1.4.1.2272.1.14.5.1.3 | ColumnrcBridgeFilterNotAllowedFrom | read-write | obsolete | Used to indicate a set of ports. Traffic arriving on any of the specified ports is not forwarded to this MAC address. |
| 1.3.6.1.4.1.2272.1.14.5.1.4 | ColumnrcBridgeFilterStatus | read-write | current | This object indicates the status of this entry. The default value is permanent(3). |
| 1.3.6.1.4.1.2272.1.14.5.1.5 | ColumnrcBridgeFilterVlanId | read-only | current | |
| 1.3.6.1.4.1.2272.1.14.5.1.6 | ColumnrcBridgeFilterPcap | read-write | current | To enable pcap for the fdb-filter |
| 1.3.6.1.4.1.2272.1.14.5.1.7 | ColumnrcBridgeFilterDestDiscard | read-write | current | Used to indicate a set of ports. Traffic arriving on any of the specified ports from this MAC address. |
| 1.3.6.1.4.1.2272.1.14.5.1.8 | ColumnrcBridgeFilterSrcDiscard | read-write | current | Used to indicate a set of ports. Traffic arriving on any of the specified ports is not forwarded to this MAC address. |
| 1.3.6.1.4.1.2272.1.14.6 | ScalarrcBridgeFilterTblSize | read-only | current | Used to indicate the number of entries in the bridge filter table. |
| 1.3.6.1.4.1.2272.1.14.7 | TablercBridgeUnknownMacDiscardTable | not-accessible | current | This table is used to configure the 'unknown mac discard' feature. This feature applies to layer 2 and layer 3 packets coming from or going out to a specific p… |
| 1.3.6.1.4.1.2272.1.14.7.1 | RowrcBridgeUnknownMacDiscardEntry | not-accessible | current | A table containing information configuring the 'unknown mac discard' feature. |
| 1.3.6.1.4.1.2272.1.14.7.1.1 | ColumnrcBridgeUnknownMacDiscardIfIndex | read-only | current | Port on which this 'unknown mac discard' configuration applied to. |
| 1.3.6.1.4.1.2272.1.14.7.1.2 | ColumnrcBridgeUnknownMacDiscardAutoLearnEnable | read-write | current | This variable is used to enable/disable the auto-learn capability of a specific port. The default value is auto-learn disabled. |
| 1.3.6.1.4.1.2272.1.14.7.1.3 | ColumnrcBridgeUnknownMacDiscardAutoLearnMode | read-write | current | This variable is used to control the auto-learn mode to either one-shot or continuous. In one-shot mode, the first n MAC addresses will be learned. The number … |
| 1.3.6.1.4.1.2272.1.14.7.1.4 | ColumnrcBridgeUnknownMacDiscardAutoLearnTableMode | read-write | current | This MIB variable is used to lock or unlock the auto-learn MAC table. When the auto-learn table is lock neither new MAC will be learned nor the original learne… |
| 1.3.6.1.4.1.2272.1.14.7.1.5 | ColumnrcBridgeUnknownMacDiscardLogViolations | read-write | current | This variable controls the logging action that the system will take when a MAC address violation event was detected. The value 'enable' means a log record will… |
| 1.3.6.1.4.1.2272.1.14.7.1.6 | ColumnrcBridgeUnknownMacDiscardSendTrap | read-write | current | This variable controls the send trap action that system will take when a MAC address violation event was detected. The value 'enable' means a SNMP trap packet … |
| 1.3.6.1.4.1.2272.1.14.7.1.7 | ColumnrcBridgeUnknownMacDiscardDisablePort | read-write | current | This variable controls the 'disable-port' action that system will take when a MAC address violation event was detected. The value 'enable' means the specific p… |
| 1.3.6.1.4.1.2272.1.14.7.1.8 | ColumnrcBridgeUnknownMacDiscardDefaultAutoLearnMonitor | read-write | obsolete | This variable controls the default monitor setting of an auto-learn MAC address. The value 'monitor' means a copy of packet that send from or to the auto-learn… |
| 1.3.6.1.4.1.2272.1.14.7.1.9 | ColumnrcBridgeUnknownMacDiscardDefaultAutoLearnPriority | read-write | obsolete | This variable controls the default priority setting of an auto-learn MAC address. The value 'low' means packets send from the MAC address is forwarded at low p… |
| 1.3.6.1.4.1.2272.1.14.7.1.10 | ColumnrcBridgeUnknownMacDiscardMacCountMax | read-write | current | This variable represents the maxium number of MACc that can be added to some port. |
| 1.3.6.1.4.1.2272.1.14.7.1.11 | ColumnrcBridgeUnknownMacDiscardMacCountCur | read-only | current | This variable represents the current number of MACs that have been added to some port. |
| 1.3.6.1.4.1.2272.1.14.8 | TablercBridgeManualEditTable | not-accessible | current | This table is used to specify what MAC addresses can be learned on each port. |
| 1.3.6.1.4.1.2272.1.14.8.1 | RowrcBridgeManualEditEntry | not-accessible | current | A table containing information of MAC addresses that can be learned. |
| 1.3.6.1.4.1.2272.1.14.8.1.1 | ColumnrcBridgeManualEditAddress | read-only | current | This variable contains the source MAC address of an entry. |
| 1.3.6.1.4.1.2272.1.14.8.1.2 | ColumnrcBridgeManualEditPorts | read-write | current | This variable contains the allowed ports on which the MAC address of this entry can be learned. |
| 1.3.6.1.4.1.2272.1.14.8.1.3 | ColumnrcBridgeManualEditMonitor | read-write | current | This variable specifies the monitoring setting of the MAC address. The value 'true' means a copy of packet frame that send from or to the MAC address is forwar… |
| 1.3.6.1.4.1.2272.1.14.8.1.4 | ColumnrcBridgeManualEditPriority | read-write | current | This variable specifies the priority setting of the MAC address. The value 'low' means packet frames send from the MAC address is forwarded at low priority. Th… |
| 1.3.6.1.4.1.2272.1.14.8.1.5 | ColumnrcBridgeManualEditStatus | read-write | current | The variable controls the status of a MAC address in the table. The value 'active' is used to add the MAC address entry into the table. The value 'invalid' is … |
| 1.3.6.1.4.1.2272.1.14.9 | ScalarrcBridgeManualEditTblSize | read-only | current | Used to indicate the number of entries in the manual edit table. |
| 1.3.6.1.4.1.2272.1.14.10 | TablercBridgeAutoLearnTable | not-accessible | current | This table contains information of auto-learned MAC address when the 'unknow MAC discard' table's auto-learn is enabled. User must explicitly lock and save the… |
| 1.3.6.1.4.1.2272.1.14.10.1 | RowrcBridgeAutoLearnEntry | not-accessible | current | Entries in this table are created automatically when the user explicitly does a lock operation on the auto-learn-table (i.e., when 'AutoLearnTableMode' is set … |
| 1.3.6.1.4.1.2272.1.14.10.1.1 | ColumnrcBridgeAutoLearnAddress | read-only | current | This variable contains the source MAC address of the entries. |
| 1.3.6.1.4.1.2272.1.14.10.1.2 | ColumnrcBridgeAutoLearnPort | read-only | current | This variable contains the port where the MAC address was learned. |
| 1.3.6.1.4.1.2272.1.14.10.1.3 | ColumnrcBridgeAutoLearnMonitor | read-only | current | This variable contains the monitor setting of the MAC address. The value 'true' means a copy of packet frame that send from or to the MAC address is forwarded … |
| 1.3.6.1.4.1.2272.1.14.10.1.4 | ColumnrcBridgeAutoLearnPriority | read-only | current | This variable contains the priority setting of the MAC address. The value 'low' means packet frames send from the MAC address is forwarded at low priority. The… |
| 1.3.6.1.4.1.2272.1.14.10.1.5 | ColumnrcBridgeAutoLearnAction | read-write | current | This variable is for converting an auto-learned MAC address entry to a manual edit MAC address entry. This variable provides a mechanism for user to move a MAC… |
| 1.3.6.1.4.1.2272.1.14.11 | ScalarrcBridgeAutoLearnTblSize | read-only | current | Used to indicate the number of entries in the auto learn table. |
| 1.3.6.1.4.1.2272.1.14.12 | TablercBridgeStaticMulticastTable | not-accessible | obsolete | |
| 1.3.6.1.4.1.2272.1.14.12.1 | RowrcBridgeStaticMulticastEntry | not-accessible | obsolete | |
| 1.3.6.1.4.1.2272.1.14.12.1.1 | ColumnrcBridgeStaticMulticastAddress | read-only | obsolete | src mac addr. |
| 1.3.6.1.4.1.2272.1.14.12.1.2 | ColumnrcBridgeStaticMulticastForwardingPorts | read-write | obsolete | ports for forward this mac |
| 1.3.6.1.4.1.2272.1.14.12.1.3 | ColumnrcBridgeStaticMulticastMltIds | read-write | obsolete | list of mlts this mac will be forwarded on |
| 1.3.6.1.4.1.2272.1.14.12.1.4 | ColumnrcBridgeStaticMulticastRowStatus | read-write | obsolete | row status |
| 1.3.6.1.4.1.2272.1.14.12.1.5 | ColumnrcBridgeStaticMulticastVlanId | read-only | obsolete | Vlan Id |
| 1.3.6.1.4.1.2272.1.14.12.1.6 | ColumnrcBridgeStaticMulticastNumMltIds | read-only | obsolete | number of mlts Ids |
| 1.3.6.1.4.1.2272.1.14.13 | ScalarrcBridgeStaticMulticastTblSize | read-only | obsolete | Used to indicate the number of entries in the static multicast table. |
| 1.3.6.1.4.1.2272.1.14.14 | TablercRateLimitTable | not-accessible | current | |
| 1.3.6.1.4.1.2272.1.14.14.1 | RowrcRateLimitEntry | not-accessible | current | |
| 1.3.6.1.4.1.2272.1.14.14.1.1 | ColumnrcRateLimitIfIndex | read-only | current | Port ifindex. |
| 1.3.6.1.4.1.2272.1.14.14.1.2 | ColumnrcRateLimitIfTrafficType | read-write | current | Type of traffic allowed. |
| 1.3.6.1.4.1.2272.1.14.14.1.3 | ColumnrcRateLimitIfAllowedRate | read-write | current | Allowed traffic rate. If chassis type is 8100. |
| 1.3.6.1.4.1.2272.1.14.14.1.4 | ColumnrcRateLimitIfEnable | read-write | current | Turn on/off rate limiting on this interface. |
| 1.3.6.1.4.1.2272.1.14.14.1.5 | ColumnrcRateLimitIfAllowedRatePps | read-write | current | Allowed traffic rate packets per second. If chassis type is 8600. |
| 1.3.6.1.4.1.2272.1.14.14.1.6 | ColumnrcRateLimitIfAllowedRateKbps | read-write | current | Allowed traffic rate Kbits per second. If chassis type is R-module. |
| 1.3.6.1.4.1.2272.1.14.14.1.7 | ColumnrcRateLimitEgressRateLimit | read-write | current | Egress Rate Limit. |
| 1.3.6.1.4.1.2272.1.14.14.1.8 | ColumnrcRateLimitEgressRateLimitState | read-write | current | Used to enable/disable shape/egress-rate-limit functionality. |
| 1.3.6.1.4.1.2272.1.14.15 | TablercBridgeStaticMcastTable | not-accessible | current | |
| 1.3.6.1.4.1.2272.1.14.15.1 | RowrcBridgeStaticMcastEntry | not-accessible | current | |
| 1.3.6.1.4.1.2272.1.14.15.1.1 | ColumnrcBridgeStaticMcastVlanId | read-only | current | Vlan Id |
| 1.3.6.1.4.1.2272.1.14.15.1.2 | ColumnrcBridgeStaticMcastAddress | read-only | current | src mac addr. |
| 1.3.6.1.4.1.2272.1.14.15.1.3 | ColumnrcBridgeStaticMcastForwardingPorts | read-write | current | ports for forward this mac |
| 1.3.6.1.4.1.2272.1.14.15.1.4 | ColumnrcBridgeStaticMcastMltIds | read-write | current | list of mlts this mac will be forwarded on |
| 1.3.6.1.4.1.2272.1.14.15.1.5 | ColumnrcBridgeStaticMcastNumMltIds | read-only | current | number of mlts Ids |
| 1.3.6.1.4.1.2272.1.14.15.1.6 | ColumnrcBridgeStaticMcastRowStatus | read-write | current | row status |
| 1.3.6.1.4.1.2272.1.14.16 | TablercBridgePP8300FilterTable | not-accessible | current | This table is a proprietary replacement to the standard dot1dStaticTable (Filtering information) in rfc1493. This table is specific for PP8300. |
| 1.3.6.1.4.1.2272.1.14.16.1 | RowrcBridgePP8300FilterEntry | not-accessible | current | |
| 1.3.6.1.4.1.2272.1.14.16.1.1 | ColumnrcBridgePP8300FilterAddress | read-only | current | The MAC address of this entry. This address is used to match the destination address of incoming packets. |
| 1.3.6.1.4.1.2272.1.14.16.1.2 | ColumnrcBridgePP8300FilterVlanId | read-only | current | |
| 1.3.6.1.4.1.2272.1.14.16.1.3 | ColumnrcBridgePP8300FilterDropCommand | read-write | current | |
| 1.3.6.1.4.1.2272.1.14.16.1.4 | ColumnrcBridgePP8300FilterQosLevel | read-write | current | Used to indicate the qos level. |
| 1.3.6.1.4.1.2272.1.14.16.1.5 | ColumnrcBridgePP8300FilterPort | read-write | current | Mac filter needs the device Id and port Id programmed properly to make the SA drop working properly |
| 1.3.6.1.4.1.2272.1.14.16.1.6 | ColumnrcBridgePP8300FilterStatus | read-write | current | This object indicates the status of this entry. The default value is permanent(3). |
| 1.3.6.1.4.1.2272.1.14.17 | TablercBridgeFdbProtectTable | not-accessible | current | This table gives information about the mac learning limits on a particular port. |
| 1.3.6.1.4.1.2272.1.14.17.1 | RowrcBridgeFdbProtectEntry | not-accessible | current | Information about a specific MAC address learning limits of a specific port. |
| 1.3.6.1.4.1.2272.1.14.17.1.1 | ColumnrcBridgeFdbProtectPortNum | read-only | current | This object is the interface on which MAC address learning limit is applied. |
| 1.3.6.1.4.1.2272.1.14.17.1.2 | ColumnrcBridgeFdbProtectMaxMacCount | read-write | current | Used to indicate maximum number of MAC address that can be learnt on the port. |
| 1.3.6.1.4.1.2272.1.14.17.1.3 | ColumnrcBridgeFdbProtectMinMacCount | read-write | current | Used to indicate minimum number of MAC address learnt which mac address learning will be re-enabled on the port. |
| 1.3.6.1.4.1.2272.1.14.17.1.4 | ColumnrcBridgeFdbProtectEnable | read-write | current | Used to enable or disable MAC learning limit feature on the port. |
| 1.3.6.1.4.1.2272.1.14.17.1.5 | ColumnrcBridgeFdbProtectCurrentMacCount | read-only | current | This object indicates the current number of MAC address learnt on the port. |
| 1.3.6.1.4.1.2272.1.14.17.1.6 | ColumnrcBridgeFdbProtectMacLearning | read-only | current | This object indicates whether the port can currrently learn new MAC addresses or not. |
| 1.3.6.1.4.1.2272.1.14.17.1.7 | ColumnrcBridgeFdbProtectViolationLogTrap | read-write | current | Used to enable or disable logging and sending of snmp trap, once MAC learning limit is reached for the port. |
| 1.3.6.1.4.1.2272.1.14.17.1.8 | ColumnrcBridgeFdbProtectViolationDownPort | read-write | current | Used to enable or disable the action of disabling the port, once MAC learning limit is reached for the port. |
| 1.3.6.1.4.1.2272.1.14.18 | TablercBridgeNewFdbTable | not-accessible | current | This table is an replacement to the standard dot1dTpFdbTable in rfc1493. |
| 1.3.6.1.4.1.2272.1.14.18.1 | RowrcBridgeNewFdbEntry | not-accessible | current | Information about a specific unicast MAC address for which the bridge has some forwarding information. |
| 1.3.6.1.4.1.2272.1.14.18.1.1 | ColumnrcBridgeNewFdbStatus | read-write | current | This object indicates the status of this entry. |
| 1.3.6.1.4.1.2272.1.14.18.1.2 | ColumnrcBridgeNewFdbAddress | read-only | current | A unicast MAC address for which the bridge has forwarding and/or filtering information. |
| 1.3.6.1.4.1.2272.1.14.18.1.3 | ColumnrcBridgeNewFdbPort | read-only | current | Either the value '0', or the port number of the port on which a frame having a source address equal to the value of the corresponding instance of rcBridgeNewFd… |
| 1.3.6.1.4.1.2272.1.14.18.1.4 | ColumnrcBridgeNewFdbMonitor | read-write | current | Used to indicate whether monitoring should be performed on this unicast MAC address. If monitoring is enabled, any packet received with a matching destination … |
| 1.3.6.1.4.1.2272.1.14.18.1.5 | ColumnrcBridgeNewFdbQosLevel | read-write | current | Used to indicate the qos level of the incoming frames with this destination Mac Address. |
| 1.3.6.1.4.1.2272.1.14.18.1.6 | ColumnrcBridgeNewFdbSmltRemote | read-only | current | A MAC address indicate for remote learnt, either local or remote. |
| 1.3.6.1.4.1.2272.1.14.18.1.7 | ColumnrcBridgeNewFdbVlanId | read-only | current | Used to indicate the Vlan ID for this MAC address. |
| 1.3.6.1.4.1.2272.1.14.19 | TablercBridgeMmrpGrpFdbTable | not-accessible | current | This table is for multicast group fdb entries |
| 1.3.6.1.4.1.2272.1.14.19.1 | RowrcBridgeMmrpGrpFdbEntry | not-accessible | current | Information about a specific multicast group MAC address for which the bridge has some forwarding information. |
| 1.3.6.1.4.1.2272.1.14.19.1.1 | ColumnrcBridgeMmrpGrpFdbVlanId | not-accessible | current | Used to indicate the Vlan ID for this MAC address. |
| 1.3.6.1.4.1.2272.1.14.19.1.2 | ColumnrcBridgeMmrpGrpFdbAddr | not-accessible | current | A multicast group MAC address for which the bridge has forwarding and/or filtering information. |
| 1.3.6.1.4.1.2272.1.14.19.1.3 | ColumnrcBridgeMmrpGrpFdbPortList | read-only | current | List of ports |
| 1.3.6.1.4.1.2272.1.14.20 | TablercBridgeTpFdbTable | not-accessible | current | This table is an replacement to the standard dot1dTpFdbTable in rfc1493. |
| 1.3.6.1.4.1.2272.1.14.20.1 | RowrcBridgeTpFdbEntry | not-accessible | current | Information about a specific unicast MAC address for which the bridge has some forwarding information. |
| 1.3.6.1.4.1.2272.1.14.20.1.1 | ColumnrcBridgeTpFdbVlanId | not-accessible | current | Used to indicate the Vlan ID for this MAC address. |
| 1.3.6.1.4.1.2272.1.14.20.1.2 | ColumnrcBridgeTpFdbAddress | not-accessible | current | A unicast MAC address for which the bridge has forwarding and/or filtering information. |
| 1.3.6.1.4.1.2272.1.14.20.1.3 | ColumnrcBridgeTpFdbStatus | read-write | current | This object indicates the status of this entry. |
| 1.3.6.1.4.1.2272.1.14.20.1.4 | ColumnrcBridgeTpFdbPort | read-only | current | Either the value '0', or the port number of the port on which a frame having a source address equal to the value of the corresponding instance of rcBridgeTpFdb… |
| 1.3.6.1.4.1.2272.1.14.20.1.5 | ColumnrcBridgeTpFdbSmltRemote | read-only | current | A MAC address indicate for remote learnt, either local or remote. |
| 1.3.6.1.4.1.2272.1.14.20.1.6 | ColumnrcBridgeTpFdbBMac | read-only | current | If the rcBridgeTpFdbEntry is learned from a SPBM network, instead of using port to track where the rcBridgeTpFdbAddress come from, the backbone MAC address is … |
| 1.3.6.1.4.1.2272.1.14.20.1.7 | ColumnrcBridgeTpFdbMonitor | read-write | current | Used to indicate whether monitoring should be performed on this unicast MAC address. If monitoring is enabled, any packet received with a matching destination … |
| 1.3.6.1.4.1.2272.1.14.20.1.8 | ColumnrcBridgeTpFdbQosLevel | read-write | current | Used to indicate the qos level of the incoming frames with this destination Mac Address. |
| 1.3.6.1.4.1.2272.1.14.20.1.9 | ColumnrcBridgeTpFdbCvid | read-only | current | Used to identify customer vid of the switched uni port of this entry is associated with. 4095 is not used. 4096 is reserved for untagged case. |
| 1.3.6.1.4.1.2272.1.14.21 | TablercBridgeRemoteMacTable | not-accessible | current | This table is for PLSB cvlan UNI remote mac entries |
| 1.3.6.1.4.1.2272.1.14.21.1 | RowrcBridgeRemoteMacEntry | not-accessible | current | Information about a specific cvlan UNI remote MAC address for which the bridge has the forwarding information. |
| 1.3.6.1.4.1.2272.1.14.21.1.1 | ColumnrcBridgeRemoteMacVlanId | not-accessible | current | Used to indicate the Vlan ID for this MAC address. |
| 1.3.6.1.4.1.2272.1.14.21.1.2 | ColumnrcBridgeRemoteMacAddr | not-accessible | current | A customer MAC address for which the bridge has forwarding and/or filtering information. |
| 1.3.6.1.4.1.2272.1.14.21.1.3 | ColumnrcBridgeRemoteMacStatus | read-only | current | This object indicates the status of this entry. |
| 1.3.6.1.4.1.2272.1.14.21.1.4 | ColumnrcBridgeRemoteMacDestAddr | read-only | current | A provider MAC address for which the bridge has forwarding and/or filtering information. |
| 1.3.6.1.4.1.2272.1.14.21.1.5 | ColumnrcBridgeRemoteMacPrimaryBVlanId | read-only | current | Used to indicate the BVlan ID for this MAC address. |
| 1.3.6.1.4.1.2272.1.14.21.1.6 | ColumnrcBridgeRemoteMacPrimaryDestSysName | read-only | current | Primary System name of the node where MAC address entry come from. |
| 1.3.6.1.4.1.2272.1.14.21.1.7 | ColumnrcBridgeRemoteMacPrimaryPort | read-only | current | Either the value '0', or the primary port on which a frame came from. |
| 1.3.6.1.4.1.2272.1.14.21.1.8 | ColumnrcBridgeRemoteMacSecondaryBVlanId | read-only | current | Used to indicate the BVlan ID for this MAC address. |
| 1.3.6.1.4.1.2272.1.14.21.1.9 | ColumnrcBridgeRemoteMacSecondaryDestSysName | read-only | current | Secondary System name of the node where MAC address entry come from. |
| 1.3.6.1.4.1.2272.1.14.21.1.10 | ColumnrcBridgeRemoteMacSecondaryPort | read-only | current | Either the value '0', or the secondary port on which a frame came from. |
| 1.3.6.1.4.1.2272.1.14.21.1.11 | ColumnrcBridgeRemoteMacSmltRemote | read-only | current | A MAC address indicate for remote learnt from ist peer |
| 1.3.6.1.4.1.2272.1.14.22 | TablercBridgeSpbmMacTable | not-accessible | current | This table is for SPBM UNI MAC entries, local and remote |
| 1.3.6.1.4.1.2272.1.14.22.1 | RowrcBridgeSpbmMacEntry | not-accessible | current | Information about a specific SPBM UNI MAC address for which the bridge has the forwarding information. MAC address can belong any SPBM UNI type, local or remote |
| 1.3.6.1.4.1.2272.1.14.22.1.1 | ColumnrcBridgeSpbmMacIsid | not-accessible | current | Used to indicate the ISID for this MAC address. |
| 1.3.6.1.4.1.2272.1.14.22.1.2 | ColumnrcBridgeSpbmMacAddr | not-accessible | current | A customer MAC address for which the bridge has forwarding and/or filtering information. |
| 1.3.6.1.4.1.2272.1.14.22.1.3 | ColumnrcBridgeSpbmMacStatus | read-only | current | This object indicates the status of this entry. |
| 1.3.6.1.4.1.2272.1.14.22.1.4 | ColumnrcBridgeSpbmMacType | read-only | current | This object indicates the type of this entry, local or remote. |
| 1.3.6.1.4.1.2272.1.14.22.1.5 | ColumnrcBridgeSpbmMacCVlanId | read-only | current | Used to indicate the CVlan ID for this local MAC address. |
| 1.3.6.1.4.1.2272.1.14.22.1.6 | ColumnrcBridgeSpbmMacCPort | read-only | current | Used to indicate the ifIndex for this local MAC address. |
| 1.3.6.1.4.1.2272.1.14.22.1.7 | ColumnrcBridgeSpbmMacBDestAddr | read-only | current | A provider MAC address for which the bridge has forwarding and/or filtering information. |
| 1.3.6.1.4.1.2272.1.14.22.1.8 | ColumnrcBridgeSpbmMacBVlanId | read-only | current | Used to indicate the BVlan ID for this remote MAC address. |
| 1.3.6.1.4.1.2272.1.14.23 | TablercBridgeIsidFdbTable | not-accessible | current | This table is for all the mac entries that are learned on the per i-sid basis.This gives both the locally learnt and remote mac entries. |
| 1.3.6.1.4.1.2272.1.14.23.1 | RowrcBridgeIsidFdbEntry | not-accessible | current | Information about a UNI MAC address for which the bridge has the forwarding information. |
| 1.3.6.1.4.1.2272.1.14.23.1.1 | ColumnrcBridgeIsidFdbIsidId | not-accessible | current | Used to indicate the i-sid for this MAC address. |
| 1.3.6.1.4.1.2272.1.14.23.1.2 | ColumnrcBridgeIsidFdbAddress | not-accessible | current | A unicast MAC address for which the bridge has forwarding and/or filtering information. |
| 1.3.6.1.4.1.2272.1.14.23.1.3 | ColumnrcBridgeIsidFdbStatus | read-only | current | This object indicates the status of this entry. |
| 1.3.6.1.4.1.2272.1.14.23.1.4 | ColumnrcBridgeIsidFdbPort | read-only | current | Either the value '0', or the port number of the port on which a frame having a source address equal to the value of the corresponding instance of rcBridgeIsidF… |
| 1.3.6.1.4.1.2272.1.14.23.1.5 | ColumnrcBridgeIsidFdbPortType | read-only | current | This object indicates the whether the rcBridgeIsidFdbAddress is learnt locally or learnt on NNI port from a remote destination. |
| 1.3.6.1.4.1.2272.1.14.23.1.6 | ColumnrcBridgeIsidFdbRemoteMacDestAddr | read-only | current | A provider MAC address for which the bridge has forwarding and/or filtering information. This value is displayed only if the PortType is remote otherwise a val… |
| 1.3.6.1.4.1.2272.1.14.23.1.7 | ColumnrcBridgeIsidFdbRemoteMacBVlanId | read-only | current | Used to indicate the BVlan ID for this MAC address if it is learnt remotely Otherwise a value of 0 is displayed. |
| 1.3.6.1.4.1.2272.1.14.23.1.8 | ColumnrcBridgeIsidFdbRemoteMacDestSysName | read-only | current | Primary System name of the node where MAC address entry in case of remote otherwise NULL is shown. |
| 1.3.6.1.4.1.2272.1.14.23.1.9 | ColumnrcBridgeIsidFdbCvid | read-only | current | Used to identify customer vid of the switched uni port of this entry is associated with. 4095 is not used. 4096 is reserved for untagged case |
| 1.3.6.1.4.1.2272.1.14.24 | TablercBridgeVnidFdbTable | not-accessible | current | This table is used to store all the mac entries that are learned on the given vnid.This gives both the locally learnt and remote mac entries. |
| 1.3.6.1.4.1.2272.1.14.24.1 | RowrcBridgeVnidFdbEntry | not-accessible | current | Information about a MAC address for which the bridge has the forwarding information. |
| 1.3.6.1.4.1.2272.1.14.24.1.1 | ColumnrcBridgeVnidFdbVnid | not-accessible | current | Used to identify the vnid value uniquely for the MAC address. |
| 1.3.6.1.4.1.2272.1.14.24.1.2 | ColumnrcBridgeVnidFdbAddress | not-accessible | current | A unicast MAC address for which the bridge has forwarding and/or filtering information. |
| 1.3.6.1.4.1.2272.1.14.24.1.3 | ColumnrcBridgeVnidFdbStatus | read-only | current | This object indicates the status of this entry. |
| 1.3.6.1.4.1.2272.1.14.24.1.4 | ColumnrcBridgeVnidFdbInterfaceIndex | read-only | current | The IfIndex of the interface on which a frame having a source address equal to the value of the corresponding instance of rcBridgeVnidFdbAddress has been learn… |
| 1.3.6.1.4.1.2272.1.14.24.1.5 | ColumnrcBridgeVnidFdbType | read-only | current | This object indicates the whether the rcBridgeVnidFdbAddress is learnt locally or learnt on NNI from a remote destination. |
| 1.3.6.1.4.1.2272.1.15 | NodercBoot | |||
| 1.3.6.1.4.1.2272.1.15.1 | ScalarrcBootFlashSwVersion | read-only | obsolete | BootFlashSwVersion indicates the software version in the Flash. |
| 1.3.6.1.4.1.2272.1.15.2 | ScalarrcBootPcmciaSwVersion | read-only | obsolete | BootPcmciaSwVersion indicate the software version in the Pcmcia card. |
| 1.3.6.1.4.1.2272.1.15.3 | ScalarrcBootLastBootSource | read-only | obsolete | Indicates the boot source of the last the system boot. |
| 1.3.6.1.4.1.2272.1.15.4 | ScalarrcBootPrimary | read-write | obsolete | BootPrimary is indicator for the primary source to boot the system. |
| 1.3.6.1.4.1.2272.1.15.5 | ScalarrcBootSecondary | read-write | obsolete | BootSecondary indicates the second choice of the boot source. |
| 1.3.6.1.4.1.2272.1.15.6 | ScalarrcBootTertiary | read-write | obsolete | BootTertiary indicates the third choice of boot source. |
| 1.3.6.1.4.1.2272.1.16 | NodercDevice | |||
| 1.3.6.1.4.1.2272.1.16.1 | ScalarrcDeviceLastBootSource | read-only | obsolete | Used to indicate the source of the software image the system was last booted with. |
| 1.3.6.1.4.1.2272.1.16.2 | ScalarrcDevicePrimarySource | read-write | obsolete | Used to indicate the primary choice to get a system software image. |
| 1.3.6.1.4.1.2272.1.16.3 | ScalarrcDevicePrimarySourceFileName | read-write | obsolete | Used to indicate a file number, if applicable. |
| 1.3.6.1.4.1.2272.1.16.4 | ScalarrcDeviceSecondarySource | read-write | obsolete | Used to indicate the secondary choice to get a system software image. |
| 1.3.6.1.4.1.2272.1.16.5 | ScalarrcDeviceSecondarySourceFileName | read-write | obsolete | Used to indicate a file name, if applicable. |
| 1.3.6.1.4.1.2272.1.16.6 | ScalarrcDeviceTertiarySource | read-write | obsolete | Used to indicate the tertiary choice to get a system software image. |
| 1.3.6.1.4.1.2272.1.16.7 | ScalarrcDeviceTertiarySourceFileName | read-write | obsolete | Used to indicate a file name, if applicable. |
| 1.3.6.1.4.1.2272.1.16.8 | ScalarrcDeviceConfigSource | read-write | obsolete | Used to indicate the location to get a system configuration file during system boot. |
| 1.3.6.1.4.1.2272.1.16.9 | ScalarrcDeviceConfigSourceFileName | read-write | obsolete | Used to indicate a file name, if applicable. |
| 1.3.6.1.4.1.2272.1.16.10 | ScalarrcDeviceFlashBytesUsed | read-only | obsolete | Used to indicate the number of bytes used in the system's configuration flash device. |
| 1.3.6.1.4.1.2272.1.16.11 | ScalarrcDeviceFlashBytesFree | read-only | obsolete | Used to indicate the number of bytes available in the system's configuration flash device. |
| 1.3.6.1.4.1.2272.1.16.12 | ScalarrcDevicePcmciaBytesUsed | read-only | obsolete | Used to indicate the number of bytes used in the system's PCMCIA device. |
| 1.3.6.1.4.1.2272.1.16.13 | ScalarrcDevicePcmciaBytesFree | read-only | obsolete | Used to indicate the number of bytes available in the system's PCMCIA device. |
| 1.3.6.1.4.1.2272.1.16.14 | ScalarrcDeviceAction | read-write | obsolete | Used to specify a particular action to perform on one of the system's device. |
| 1.3.6.1.4.1.2272.1.16.15 | ScalarrcDeviceResult | read-only | obsolete | Used to indicate the result of the last action performed on one of the system's device. |
| 1.3.6.1.4.1.2272.1.16.16 | ScalarrcDeviceFlashNumFiles | read-only | obsolete | Used to indicate the number of files available in the system's configuration flash device. |
| 1.3.6.1.4.1.2272.1.16.17 | ScalarrcDevicePcmciaNumFiles | read-only | obsolete | Used to indicate the number of files available in the system's PCMCIA device. |
| 1.3.6.1.4.1.2272.1.16.25 | TablercDeviceFlashTable | not-accessible | obsolete | Flash table. |
| 1.3.6.1.4.1.2272.1.16.25.1 | RowrcDeviceFlashEntry | not-accessible | obsolete | An entry in the system's flash table. |
| 1.3.6.1.4.1.2272.1.16.25.1.1 | ColumnrcDeviceFlashFileNum | read-only | obsolete | Used to indicate a particular file in flash. |
| 1.3.6.1.4.1.2272.1.16.25.1.2 | ColumnrcDeviceFlashFileName | read-only | obsolete | Used to indicate a flash file's name. |
| 1.3.6.1.4.1.2272.1.16.25.1.3 | ColumnrcDeviceFlashFileVersion | read-only | obsolete | Used to indicate the flash file's version. |
| 1.3.6.1.4.1.2272.1.16.25.1.4 | ColumnrcDeviceFlashFileType | read-only | obsolete | Used to indicate the flash file's type. |
| 1.3.6.1.4.1.2272.1.16.25.1.5 | ColumnrcDeviceFlashFileMode | read-only | obsolete | Used to indicate the flash file's mode. |
| 1.3.6.1.4.1.2272.1.16.25.1.6 | ColumnrcDeviceFlashFileSize | read-only | obsolete | Used to indicate the flash file's size. |
| 1.3.6.1.4.1.2272.1.16.25.1.7 | ColumnrcDeviceFlashFileCrc | read-only | obsolete | Used to indicate the flash file's CRC. |
| 1.3.6.1.4.1.2272.1.16.25.1.8 | ColumnrcDeviceFlashFileStatus | read-only | obsolete | Used to indicate the flash file's status. A file that has been marked for deletion, but who's space has not been reclaimed yet is marked as 'deleted'. |
| 1.3.6.1.4.1.2272.1.16.25.1.9 | ColumnrcDeviceFlashRowStatus | read-write | obsolete | Row status. |
| 1.3.6.1.4.1.2272.1.16.26 | TablercDevicePcmciaTable | not-accessible | obsolete | PCMCIA table. |
| 1.3.6.1.4.1.2272.1.16.26.1 | RowrcDevicePcmciaEntry | not-accessible | obsolete | An entry in the system's PCMCIA table. |
| 1.3.6.1.4.1.2272.1.16.26.1.1 | ColumnrcDevicePcmciaFileNum | read-only | obsolete | Used to indicate a particular file in PCMCIA. |
| 1.3.6.1.4.1.2272.1.16.26.1.2 | ColumnrcDevicePcmciaFileName | read-only | obsolete | Used to indicate the PCMCIA file's name. |
| 1.3.6.1.4.1.2272.1.16.26.1.3 | ColumnrcDevicePcmciaFileVersion | read-only | obsolete | Used to indicate the PCMCIA file's version. |
| 1.3.6.1.4.1.2272.1.16.26.1.4 | ColumnrcDevicePcmciaFileType | read-only | obsolete | Used to indicate the PCMCIA file's type. |
| 1.3.6.1.4.1.2272.1.16.26.1.5 | ColumnrcDevicePcmciaFileMode | read-only | obsolete | Used to indicate a particular file in mode. |
| 1.3.6.1.4.1.2272.1.16.26.1.6 | ColumnrcDevicePcmciaFileSize | read-only | obsolete | Used to indicate the PCMCIA file's size. |
| 1.3.6.1.4.1.2272.1.16.26.1.7 | ColumnrcDevicePcmciaFileCrc | read-only | obsolete | Used to indicate the PCMCIA file's CRC. |
| 1.3.6.1.4.1.2272.1.16.26.1.8 | ColumnrcDevicePcmciaFileStatus | read-only | obsolete | Used to indicate the PCMCIA file's status. A file that has been marked for deletion, but who's space has not been reclaimed yet is marked as 'deleted'. |
| 1.3.6.1.4.1.2272.1.16.26.1.9 | ColumnrcDevicePcmciaRowStatus | read-write | obsolete | Row status. |
| 1.3.6.1.4.1.2272.1.17 | NodercMlt | |||
| 1.3.6.1.4.1.2272.1.17.1 | ScalarrcMltNumMlts | read-only | current | The number of MLTs currently defined in the switch. |
| 1.3.6.1.4.1.2272.1.17.2 | ScalarrcMltPotentialMembers | read-only | current | The set of ports that are not members of any MLT. |
| 1.3.6.1.4.1.2272.1.17.3 | ScalarrcMltIstSessionEnable | read-write | current | Used to enable/disable mlt functionality. |
| 1.3.6.1.4.1.2272.1.17.4 | ScalarrcMltIstSessionStatus | read-only | current | Used to enable/disable mlt functionality. |
| 1.3.6.1.4.1.2272.1.17.5 | ScalarrcMltIstPeerIp | read-write | current | IST mlt Peer Ip address. |
| 1.3.6.1.4.1.2272.1.17.6 | ScalarrcMltIstVlanId | read-write | current | IST mlt Vlan Id. 0 is default when it is not set, VSP supports 0 to 4084 |
| 1.3.6.1.4.1.2272.1.17.7 | ScalarrcMltDisablePortsOnShutdown | read-write | current | When true(1), the port members of an MLT will be automatically shutdown when the MLT becomes disabled. |
| 1.3.6.1.4.1.2272.1.17.10 | TablercMltTable | not-accessible | current | A list of Multi-Link Trunk entries. The number of entries is given by rcMltNumMlts. |
| 1.3.6.1.4.1.2272.1.17.10.1 | RowrcMltEntry | not-accessible | current | Entry containing configuration information for a particular Multi-Link Trunk. |
| 1.3.6.1.4.1.2272.1.17.10.1.1 | ColumnrcMltId | read-only | current | A value that uniquely identifies the Multi-Link Trunk associated with this entry. |
| 1.3.6.1.4.1.2272.1.17.10.1.2 | ColumnrcMltName | read-write | current | An administratively-assigned name for this MLT. |
| 1.3.6.1.4.1.2272.1.17.10.1.3 | ColumnrcMltPortMembers | read-write | current | The set of ports that are members of this MLT. |
| 1.3.6.1.4.1.2272.1.17.10.1.4 | ColumnrcMltPortType | read-write | current | The type of MLT port: access(1) or trunk(2). |
| 1.3.6.1.4.1.2272.1.17.10.1.5 | ColumnrcMltNumVlanIds | read-only | current | Used to indicate the number of VLAN IDs that are stored in the rcMltVlanIds variable. |
| 1.3.6.1.4.1.2272.1.17.10.1.6 | ColumnrcMltVlanIds | read-write | current | An array used to identify which VLANs this MLT is associated with. Each VLAN ID is stored as a two octet value. The first octet in the pair holds bits 15-8 of … |
| 1.3.6.1.4.1.2272.1.17.10.1.7 | ColumnrcMltRowStatus | read-write | current | Used to create/delete entries in the rcMltTable. |
| 1.3.6.1.4.1.2272.1.17.10.1.8 | ColumnrcMltEnable | read-only | current | Enable the entry. |
| 1.3.6.1.4.1.2272.1.17.10.1.9 | ColumnrcMltLoadBalance | read-write | current | Perform load balance? |
| 1.3.6.1.4.1.2272.1.17.10.1.10 | ColumnrcMltDistributionAlgorithm | read-write | current | none(1), ... It will be fill later |
| 1.3.6.1.4.1.2272.1.17.10.1.11 | ColumnrcMltIfIndex | read-only | current | Used to indicate the 'logical' ifIndex assigned to this MLT. |
| 1.3.6.1.4.1.2272.1.17.10.1.12 | ColumnrcMltMltType | read-write | current | MLT type. |
| 1.3.6.1.4.1.2272.1.17.10.1.13 | ColumnrcMltSmltId | read-write | current | Split MLT id. |
| 1.3.6.1.4.1.2272.1.17.10.1.14 | ColumnrcMltRunningType | read-only | current | Split MLT running type. |
| 1.3.6.1.4.1.2272.1.17.10.1.15 | ColumnrcMltSvlanPortType | read-write | current | Set MLT port type. |
| 1.3.6.1.4.1.2272.1.17.10.1.16 | ColumnrcMltMulticastDistribution | read-write | current | Enable/Disable multicast distribution per mlt. |
| 1.3.6.1.4.1.2272.1.17.10.1.17 | ColumnrcMltLacp10gBackup | read-create | current | Enable/Disable 10G Mlt reliance backup mode. |
| 1.3.6.1.4.1.2272.1.17.10.1.18 | ColumnrcMltAggregatable | read-write | current | Enable/Disable link aggregation on a MLT. |
| 1.3.6.1.4.1.2272.1.17.10.1.19 | ColumnrcMltClearLinkAggregate | read-write | current | clear link aggregate, equivalent to disable and re-enable aggregatable on the MLT. |
| 1.3.6.1.4.1.2272.1.17.10.1.20 | ColumnrcMltNtStgEnable | read-write | current | Indicates whether this MLT is operating in Nortel Mode or in Cisco Mode. true = Nortel Mode false = Cisco Mode. |
| 1.3.6.1.4.1.2272.1.17.10.1.21 | ColumnrcMltDesignatedPort | read-only | current | Indicates the Designated port for the MLT. |
| 1.3.6.1.4.1.2272.1.17.10.1.22 | ColumnrcMltAggOperState | read-only | current | Link aggregation state on a MLT. |
| 1.3.6.1.4.1.2272.1.17.10.1.23 | ColumnrcMltAggTimeOfLastOperChange | read-only | current | The time value since the interface entered its current operational state. |
| 1.3.6.1.4.1.2272.1.17.10.1.24 | ColumnrcMltVplsMgmtVlan | read-create | current | Management Vlan is configured on this mlt |
| 1.3.6.1.4.1.2272.1.17.10.1.25 | ColumnrcMltLoadDistributionOption | read-create | current | Used to specify the Load Balancing option for MLT in UNI |
| 1.3.6.1.4.1.2272.1.17.10.1.26 | ColumnrcMltUniAggrMacIdx | read-create | current | Used to specify the index of the mac address pool reserved for MLT uni |
| 1.3.6.1.4.1.2272.1.17.10.1.27 | ColumnrcMltUniAggrMacAddress | read-only | current | Used to display the mac address reserved for this MLT |
| 1.3.6.1.4.1.2272.1.17.10.1.28 | ColumnrcMltQinqEtherType | read-create | current | The qinq ether type value. It should be displayed and input as Hex value. It would only be used when MLT is associated with QnQ service UNI. Otherwise, it woul… |
| 1.3.6.1.4.1.2272.1.17.10.1.29 | ColumnrcMltEgressCosProfileName | read-create | current | Mlt Egress COS Profile Name, which is defined by rcCosProfileTable |
| 1.3.6.1.4.1.2272.1.17.10.1.30 | ColumnrcMltEgressPolicerAdminState | read-create | current | Enable/disable Mlt Egress Policer |
| 1.3.6.1.4.1.2272.1.17.10.1.31 | ColumnrcMltAggrEgressBandwidth | read-create | current | Aggregated Egress Bandwidth Policer is used. |
| 1.3.6.1.4.1.2272.1.17.10.1.32 | ColumnrcMltAggrIngressBandwidth | read-create | current | Aggregated Ingress Bandwidth Policer is used. |
| 1.3.6.1.4.1.2272.1.17.10.1.33 | ColumnrcMltAggrMacAlloc | read-create | current | Aggregated Mac Allocation is used |
| 1.3.6.1.4.1.2272.1.17.10.1.34 | ColumnrcMltAggMinLink | read-create | current | If number of active links goes below configured minimum-link number, the entire LAG is declared down. |
| 1.3.6.1.4.1.2272.1.17.10.1.35 | ColumnrcMltMtu | read-create | current | MTU for ports in Mlt |
| 1.3.6.1.4.1.2272.1.17.10.1.36 | ColumnrcMltInterfaceType | read-create | current | This value indicates whether ports in the mlt are of type <normal/silent/uni>. A port can be included in any EVPN service only if this attribute is set to uni.… |
| 1.3.6.1.4.1.2272.1.17.10.1.37 | ColumnrcMltConfiguredMembers | read-create | current | The set of ports that are configured members of this MLT. Toronto release allows us to add a port to a LACP enabled MLT. These port get added as ConfiguredMemb… |
| 1.3.6.1.4.1.2272.1.17.10.1.38 | ColumnrcMltMtuAdminState | read-create | current | Set Mlt MTU enable or disable |
| 1.3.6.1.4.1.2272.1.17.10.1.39 | ColumnrcMltPeerPortMembers | read-only | deprecated | The set of Peer ports which are connected to local ports (rcMltPortMember) of this MLT. This object has been deprecated/obsolete by object rcMltPeerPortMembers… |
| 1.3.6.1.4.1.2272.1.17.10.1.40 | ColumnrcMltCpLimitPktRate | read-write | current | Used to limit Control packets on the port to qos-levels 6 and 7. Sets the limit in packets per second. |
| 1.3.6.1.4.1.2272.1.17.10.1.41 | ColumnrcMltCpLimitShutDownEnable | read-write | current | Used to indicate if the mlt-ports should be shutdown when the CpLimitPktRate is exceeded. |
| 1.3.6.1.4.1.2272.1.17.10.1.42 | ColumnrcMltVlanIdList | read-write | current | This bitfield is used to identify which VLANs this MLT is associated with. Each VLAN ID is stored as a bit. The most-significant (left-most) bit represents Vla… |
| 1.3.6.1.4.1.2272.1.17.10.1.43 | ColumnrcMltEntryOwner | read-only | current | Defines the owner of the MLT. |
| 1.3.6.1.4.1.2272.1.17.10.1.44 | ColumnrcMltDatapathProgrammingState | read-only | current | Defines the datapath programming state of the MLT. |
| 1.3.6.1.4.1.2272.1.17.10.1.45 | ColumnrcMltL4Hash | read-create | current | If enabled all the non fragmented L4 packets will take L4 hashing and all the fragmented L4 packets and L3 packets will take L3 hashing. If disabled then both … |
| 1.3.6.1.4.1.2272.1.17.10.1.46 | ColumnrcMltPrivateVlanType | read-write | current | The mode used when private VLAN is associated with MLT. If the VLAN is not private then this is ignored. If the VLAN is private then the value must be either t… |
| 1.3.6.1.4.1.2272.1.17.10.1.47 | ColumnrcMltBpduMode | read-create | current | This object specifies the BPDU send/receive mode: send/receive BPDUs on all trunk ports (1) or on a single trunk port (2). |
| 1.3.6.1.4.1.2272.1.17.10.1.48 | ColumnrcMltPeerPortMembersList | read-only | current | A list of peer ports in the display format slot/port,slot/port/sub-port. A port display format cannot be always hardcoded as slot/port. It depends on the dynam… |
| 1.3.6.1.4.1.2272.1.17.10.1.49 | ColumnrcMltFlexUniEnable | read-create | current | Used to set FLEX UNI enable/disable on mlt |
| 1.3.6.1.4.1.2272.1.17.11 | NodercMltMcastDistribution | |||
| 1.3.6.1.4.1.2272.1.17.11.1 | ScalarrcMltMcastDistributionEnable | read-write | current | Used to enable/disable this feature to distribute multicast traffic on MLT ports. All the cards in the system must be E-Tickets. Cannot perform distribution in… |
| 1.3.6.1.4.1.2272.1.17.11.2 | ScalarrcMltMcastDistributionGrpMask | read-write | current | Group Mask. Create a MLT abstraction layer to distribute traffic basd on (source, group) information of the multicast packet. The algorithm to pick the actual … |
| 1.3.6.1.4.1.2272.1.17.11.3 | ScalarrcMltMcastDistributionSrcMask | read-write | current | Source Mask. |
| 1.3.6.1.4.1.2272.1.17.11.4 | ScalarrcMltMcastDistributionRedistributionEnable | read-write | current | Enable redistribution. |
| 1.3.6.1.4.1.2272.1.17.12 | TablercSltPortTable | not-accessible | current | |
| 1.3.6.1.4.1.2272.1.17.12.1 | RowrcSltPortEntry | not-accessible | current | Entry containing configuration information for a particular Multi-Link Trunk. |
| 1.3.6.1.4.1.2272.1.17.12.1.1 | ColumnrcSltPortIfIndex | read-only | current | An interface for this SLT. |
| 1.3.6.1.4.1.2272.1.17.12.1.2 | ColumnrcSltPortSmltId | read-write | current | A uniquely identifies the Single-Link Trunk associated with this entry. |
| 1.3.6.1.4.1.2272.1.17.12.1.3 | ColumnrcSltPortOperType | read-only | current | The current operate type of the port normal or smlt. |
| 1.3.6.1.4.1.2272.1.17.12.1.4 | ColumnrcSltPortRowStatus | read-write | current | Used to create/delete entries of the Table. |
| 1.3.6.1.4.1.2272.1.17.13 | TablercMltVlacpTable | not-accessible | current | Mlt Virtual LACP table |
| 1.3.6.1.4.1.2272.1.17.13.1 | RowrcMltVlacpEntry | not-accessible | current | Entry containing info. for a particular port |
| 1.3.6.1.4.1.2272.1.17.13.1.1 | ColumnrcMltVlacpAdminEnable | read-write | current | Administratively enable/disable Virtual LACP on a MLT |
| 1.3.6.1.4.1.2272.1.17.13.1.2 | ColumnrcMltVlacpFastPeriodicTimer | read-write | current | The number of miliseconds between periodic transmissions using Short Timeouts |
| 1.3.6.1.4.1.2272.1.17.13.1.3 | ColumnrcMltVlacpTimeoutScale | read-write | current | Scalar value used to calculate timeout time from periodic time. Timeout = PeriodicTime * TimeoutScale |
| 1.3.6.1.4.1.2272.1.17.13.1.4 | ColumnrcMltVlacpEtherMacAddress | read-write | current | Multicast Mac Address exclusively used for VLACPDU's |
| 1.3.6.1.4.1.2272.1.17.13.1.5 | ColumnrcMltVlacpDualHomingEnable | read-write | current | Enable/Disable Dual homing on Virtual LACP on a MLT |
| 1.3.6.1.4.1.2272.1.17.14 | TablercMltBvidPortTable | not-accessible | current | Table contains Bridge Vlan configured information for Primary and Secondary ports for MLT-UNI |
| 1.3.6.1.4.1.2272.1.17.14.1 | RowrcMltBvidPortEntry | not-accessible | current | Entry with Info about VLAN with its Primary and secondary ports for MLT-UNI |
| 1.3.6.1.4.1.2272.1.17.14.1.1 | ColumnrcMltBvidMltId | not-accessible | current | VLAN ID of the Port List |
| 1.3.6.1.4.1.2272.1.17.14.1.2 | ColumnrcMltBvidVlanId | not-accessible | current | VLAN ID of the Port List |
| 1.3.6.1.4.1.2272.1.17.14.1.3 | ColumnrcMltBvidPrimaryPort | read-create | current | Primary port of the MLT for the VLAN when load distribution option is b-vid |
| 1.3.6.1.4.1.2272.1.17.14.1.4 | ColumnrcMltBvidSecondaryPort | read-create | current | Secondary port of the MLT for the VLAN when load distribution option is b-vid |
| 1.3.6.1.4.1.2272.1.17.14.1.5 | ColumnrcMltBvidRowStatus | read-create | current | Used to Add/delete entries in the table |
| 1.3.6.1.4.1.2272.1.17.15 | NodercMltNotificationObjects | |||
| 1.3.6.1.4.1.2272.1.17.15.1 | ScalarrcMltAggTrapEvent | accessible-for-notify | current | It indicates three trap events: local down(1), remote down(2), up(3). |
| 1.3.6.1.4.1.2272.1.17.16 | ScalarrcMltIstStpEnable | read-write | current | Used to enable/disable mlt ist stp functionality. |
| 1.3.6.1.4.1.2272.1.18 | NodercWeb | |||
| 1.3.6.1.4.1.2272.1.18.1 | ScalarrcWebEnableServer | read-write | current | Control whether the web server should be enabled. Setting this variable to true will make the server operational. Setting this variable to false will disable s… |
| 1.3.6.1.4.1.2272.1.18.2 | ScalarrcWebRWAUserName | read-write | current | User name for the read-write-all web-server account. |
| 1.3.6.1.4.1.2272.1.18.3 | ScalarrcWebRWAPassword | read-write | current | Password for the read-write-all web-server account. |
| 1.3.6.1.4.1.2272.1.18.4 | ScalarrcWebRWUserName | read-write | current | User name for the read-write web-server account. |
| 1.3.6.1.4.1.2272.1.18.5 | ScalarrcWebRWPassword | read-write | current | Password for the read-write web-server account. |
| 1.3.6.1.4.1.2272.1.18.6 | ScalarrcWebROUserName | read-write | current | User name for the read-only web-server account. |
| 1.3.6.1.4.1.2272.1.18.7 | ScalarrcWebROPassword | read-write | current | Password for the read-only web-server account. |
| 1.3.6.1.4.1.2272.1.18.8 | ScalarrcWebLastChange | read-only | current | Last web-browser initiated configuration change since sysUpTime. |
| 1.3.6.1.4.1.2272.1.18.9 | ScalarrcWebNumHits | read-only | current | Number of hits to the web-server |
| 1.3.6.1.4.1.2272.1.18.10 | ScalarrcWebNumAccessChecks | read-only | current | Number of access checks performed by the web-server |
| 1.3.6.1.4.1.2272.1.18.11 | ScalarrcWebNumAccessBlocks | read-only | current | Number of accesses blocked by the web-server |
| 1.3.6.1.4.1.2272.1.18.12 | ScalarrcWebNumRxErrors | read-only | current | Number of receive errors encountered by the web-server |
| 1.3.6.1.4.1.2272.1.18.13 | ScalarrcWebNumTxErrors | read-only | current | Number of transmit errors encountered by the web-server |
| 1.3.6.1.4.1.2272.1.18.14 | ScalarrcWebNumSetRequest | read-only | current | Number of set-request to the web-server |
| 1.3.6.1.4.1.2272.1.18.15 | ScalarrcWebPrimaryHtmlSourceDir | read-write | current | primary html source directory |
| 1.3.6.1.4.1.2272.1.18.16 | ScalarrcWebSecondaryHtmlSourceDir | read-write | current | secondary html source directory |
| 1.3.6.1.4.1.2272.1.18.17 | ScalarrcWebTertiaryHtmlSourceDir | read-write | current | tertiary html source directory |
| 1.3.6.1.4.1.2272.1.18.18 | ScalarrcWebRWL3UserName | read-write | current | user name for the L3 web server account |
| 1.3.6.1.4.1.2272.1.18.19 | ScalarrcWebRWL3Password | read-write | current | password for the L3 web server account |
| 1.3.6.1.4.1.2272.1.18.20 | ScalarrcWebRWL2UserName | read-write | current | user name for the L2 web server account |
| 1.3.6.1.4.1.2272.1.18.21 | ScalarrcWebRWL2Password | read-write | current | password for the L2 web server account |
| 1.3.6.1.4.1.2272.1.18.22 | ScalarrcWebDefaultDisplayRows | read-write | current | default display rows in html page. |
| 1.3.6.1.4.1.2272.1.18.23 | ScalarrcWebLastHostAccessBlocked | read-only | deprecated | last host access blocked |
| 1.3.6.1.4.1.2272.1.18.24 | ScalarrcWebHelpTftpSourceDir | read-write | current | tftp source directory for help files |
| 1.3.6.1.4.1.2272.1.18.25 | ScalarrcWebHttpPort | read-write | current | the HTTP port for web access |
| 1.3.6.1.4.1.2272.1.18.26 | ScalarrcWebSecureOnly | read-write | current | Control whether the secure only should be enabled. Setting this variable to true will make the server support HTTPS only. Setting this variable to false will m… |
| 1.3.6.1.4.1.2272.1.18.27 | ScalarrcWebHttpsPort | read-write | current | the HTTPs port for web access |
| 1.3.6.1.4.1.2272.1.18.28 | ScalarrcWebLastHostAccessBlockedAddressType | read-only | current | Address type (IPv4/IPv6) of last host access blocked |
| 1.3.6.1.4.1.2272.1.18.29 | ScalarrcWebLastHostAccessBlockedAddress | read-only | current | last host access blocked |
| 1.3.6.1.4.1.2272.1.18.30 | ScalarrcWebInactivityTimeout | read-write | current | Used to indicate the amount of idle time, in seconds towait before timing out EDM login sessions. |
| 1.3.6.1.4.1.2272.1.18.31 | ScalarrcWebTlsMinimumVersion | read-write | current | Specifies the minimum version of TLS protocol supported by the Web Server. tlsv10 sets the version to 1.0. tlsv11 sets the version to 1.1. tlsv12 sets the vers… |
| 1.3.6.1.4.1.2272.1.18.32 | ScalarrcWebMinimumPasswordLength | read-write | current | Minimum length password for web user |
| 1.3.6.1.4.1.2272.1.19 | NodercCli | |||
| 1.3.6.1.4.1.2272.1.19.1 | ScalarrcCliRWAUserName | read-write | current | User name for the read-write-all CLI account. |
| 1.3.6.1.4.1.2272.1.19.2 | ScalarrcCliRWAPassword | read-write | current | Password for the read-write-all CLI account. |
| 1.3.6.1.4.1.2272.1.19.3 | ScalarrcCliRWUserName | read-write | current | User name for the read-write CLI account. |
| 1.3.6.1.4.1.2272.1.19.4 | ScalarrcCliRWPassword | read-write | current | Password for the read-write CLI account. |
| 1.3.6.1.4.1.2272.1.19.5 | ScalarrcCliRWL3UserName | read-write | current | User name for the read-write layer-3 CLI account. |
| 1.3.6.1.4.1.2272.1.19.6 | ScalarrcCliRWL3Password | read-write | current | Password for the read-write layer-3 CLI account. |
| 1.3.6.1.4.1.2272.1.19.7 | ScalarrcCliRWL2UserName | read-write | current | User name for the read-write layer-2 CLI account. |
| 1.3.6.1.4.1.2272.1.19.8 | ScalarrcCliRWL2Password | read-write | current | Password for the read-write layer-2 CLI account. |
| 1.3.6.1.4.1.2272.1.19.9 | ScalarrcCliROUserName | read-write | current | User name for the read-only CLI account. |
| 1.3.6.1.4.1.2272.1.19.10 | ScalarrcCliROPassword | read-write | current | Password for the read-only CLI account. |
| 1.3.6.1.4.1.2272.1.19.11 | ScalarrcCliMaxTelnetSessions | read-write | current | Used to indicate the maximum number of telnet sessions the system will support. |
| 1.3.6.1.4.1.2272.1.19.12 | ScalarrcCliMaxRloginSessions | read-write | current | Used to indicate the maximum number of rlogin sessions the system will support. |
| 1.3.6.1.4.1.2272.1.19.13 | ScalarrcCliTimeout | read-write | current | Used to indicate the amount of idle time, in seconds to wait before timing out telnet and rlogin sessions. |
| 1.3.6.1.4.1.2272.1.19.14 | ScalarrcCliNumAccessViolations | read-only | current | Used to indicate the number of CLI access violations detected by the system. |
| 1.3.6.1.4.1.2272.1.19.15 | ScalarrcCliRWL1UserName | read-write | current | User name for the read-write layer-1 CLI account. |
| 1.3.6.1.4.1.2272.1.19.16 | ScalarrcCliRWL1Password | read-write | current | Password for the read-write layer-1 CLI account. |
| 1.3.6.1.4.1.2272.1.19.17 | ScalarrcCliPasswordChange | read-only | current | Used to indication which password is changed when sending a rcCliPasswordChange trap. |
| 1.3.6.1.4.1.2272.1.19.18 | ScalarrcCliPassChangeResult | read-only | current | Used to indication the result of changing password when sending a rcPasswordChange trap. |
| 1.3.6.1.4.1.2272.1.19.19 | ScalarrcCliRWEnable | read-write | current | Enable/Disable for the read-write CLI account. |
| 1.3.6.1.4.1.2272.1.19.20 | ScalarrcCliRWL1Enable | read-write | current | Enable/Disable for the read-write-layer1 CLI account. |
| 1.3.6.1.4.1.2272.1.19.21 | ScalarrcCliRWL2Enable | read-write | current | Enable/Disable for the read-write-layer2 CLI account. |
| 1.3.6.1.4.1.2272.1.19.22 | ScalarrcCliRWL3Enable | read-write | current | Enable/Disable for the read-write-layer3 CLI account. |
| 1.3.6.1.4.1.2272.1.19.23 | ScalarrcCliROEnable | read-write | current | Enable/Disable for the read-only CLI account. |
| 1.3.6.1.4.1.2272.1.19.24 | ScalarrcCliRWAEnable | read-only | current | Enable/Disable for the Admin CLI account. |
| 1.3.6.1.4.1.2272.1.19.25 | ScalarrcCliOperatorUserName | read-write | current | User name for the Operator CLI account. |
| 1.3.6.1.4.1.2272.1.19.26 | ScalarrcCliOperatorPassword | read-write | current | Password for the Operator CLI account. |
| 1.3.6.1.4.1.2272.1.19.27 | ScalarrcCliOperatorEnable | read-only | current | Enable/Disable for the Operator CLI account. |
| 1.3.6.1.4.1.2272.1.19.28 | ScalarrcCliSecurityUserName | read-write | current | User name for the Security CLI account. |
| 1.3.6.1.4.1.2272.1.19.29 | ScalarrcCliSecurityPassword | read-write | current | Password for the Security CLI account. |
| 1.3.6.1.4.1.2272.1.19.30 | ScalarrcCliSecurityEnable | read-only | current | Enable/Disable for the Security CLI account. |
| 1.3.6.1.4.1.2272.1.19.31 | ScalarrcCliAuditorUserName | read-write | current | User name for the Auditor CLI account. |
| 1.3.6.1.4.1.2272.1.19.32 | ScalarrcCliAuditorPassword | read-write | current | Password for the Auditor CLI account. |
| 1.3.6.1.4.1.2272.1.19.33 | ScalarrcCliAuditorEnable | read-only | current | Enable/Disable for the Auditor CLI account. |
| 1.3.6.1.4.1.2272.1.19.34 | ScalarrcCliPasswordUpperCase | read-write | current | Number of mandatory upper case characters to be included as part of user password, failing which password creation will not succeed |
| 1.3.6.1.4.1.2272.1.19.35 | ScalarrcCliPasswordLowerCase | read-write | current | Number of mandatory lower case characters to be included as part of user password, failing which password creation will not succeed |
| 1.3.6.1.4.1.2272.1.19.36 | ScalarrcCliPasswordNumericCase | read-write | current | Number of mandatory numeric characters to be included as part of user password, failing which password creation will not succeed |
| 1.3.6.1.4.1.2272.1.19.37 | ScalarrcCliPasswordSpecialCase | read-write | current | Number of mandatory special characters to be included as part of user password, failing which password creation will not succeed |
| 1.3.6.1.4.1.2272.1.19.38 | ScalarrcCliPasswordChangeInterval | read-write | current | The time interval in which user cannot change his password from the last password change |
| 1.3.6.1.4.1.2272.1.19.39 | ScalarrcCliPasswordPreNotificationInterval1 | read-write | current | The time for first notificateion to be sent to the user before the expiry of user password |
| 1.3.6.1.4.1.2272.1.19.40 | ScalarrcCliPasswordPreNotificationInterval2 | read-write | current | The time for second notificateion to be sent to the user before the expiry of user password. |
| 1.3.6.1.4.1.2272.1.19.41 | ScalarrcCliPasswordPreNotificationInterval3 | read-write | current | The time for third notificateion to be sent to the user before the expiry of user password. |
| 1.3.6.1.4.1.2272.1.19.42 | ScalarrcCliPasswordPostNotificationInterval1 | read-write | current | The time for first notificateion to be sent to the user after the expiry of user password. |
| 1.3.6.1.4.1.2272.1.19.43 | ScalarrcCliPasswordPostNotificationInterval2 | read-write | current | The time for second notificateion to be sent to the user after the expiry of user password. |
| 1.3.6.1.4.1.2272.1.19.44 | ScalarrcCliPasswordPostNotificationInterval3 | read-write | current | The time for third notificateion to be sent to the user after the expiry of user password. |
| 1.3.6.1.4.1.2272.1.19.45 | ScalarrcCliPasswordAccountIdleTime | read-write | current | Specifies time duration, in days, within which if a user is not logged in, the account gets disabled. |
| 1.3.6.1.4.1.2272.1.19.46 | ScalarrcCliPasswordAccountUserName | accessible-for-notify | current | Object to be used for ecnUserAccountIdleTimeExpireTrap | rcnAuthenticationFailureLoginAttemptsTrap to indicate that idle time has expired for user account or c… |
| 1.3.6.1.4.1.2272.1.19.47 | ScalarrcCliPasswordUserAccessLevel | accessible-for-notify | current | Object to be used for ecnUserAccountIdleTimeExpireTrap | rcnAuthenticationFailureLoginAttemptsTrap to indicate that idle time has expired for user account or c… |
| 1.3.6.1.4.1.2272.1.19.48 | ScalarrcCliPasswordPostExpiryLogins | read-write | current | Number of allowed logins for a user post the password expiry. |
| 1.3.6.1.4.1.2272.1.19.49 | ScalarrcCliLoginAttemptErrorTrapEnable | read-write | current | Indicates whether to send trap upon receiving a login attempt error in the system. |
| 1.3.6.1.4.1.2272.1.20 | NodercError | |||
| 1.3.6.1.4.1.2272.1.20.1 | ScalarrcErrorLevel | read-only | current | Error level indicator for the last error reported in the system. The meaning of this value are : 0 = Informative Information 1 = Warning Condition 2 = Error Co… |
| 1.3.6.1.4.1.2272.1.20.2 | ScalarrcErrorCode | read-only | current | Error code indicator for the last error reported in the system. This is an encoded value that identifies the software module that generated the error message a… |
| 1.3.6.1.4.1.2272.1.20.3 | ScalarrcErrorText | read-only | current | Error string of the last error reported in the system. |
| 1.3.6.1.4.1.2272.1.20.4 | ScalarrcErrorReturnCode | read-only | current | This variable is used primarily as an enumeration to list the proprietary return codes that this device can send to a management station in response to a faile… |
| 1.3.6.1.4.1.2272.1.20.5 | ScalarrcErrorSendTrap | read-write | current | Indicates whether to send trap upon receiving an error in the system. |
| 1.3.6.1.4.1.2272.1.21 | NodercTraps | |||
| 1.3.6.1.4.1.2272.1.21.0 | NodercTrapsMib | |||
| 1.3.6.1.4.1.2272.1.21.0.1 | NotificationrcnCardDown | current | A rcCardDown trap signifies that the SNMPv2 entity, acting in an agent role, has detected that the rcCardOperStatus object for one of its cards is about to tra… | |
| 1.3.6.1.4.1.2272.1.21.0.2 | NotificationrcnCardUp | current | A rcCardUp trap signifies that the SNMPv2 entity, acting in an agent role, has detected that the rcCardOperStatus object for one of its cards is about to trans… | |
| 1.3.6.1.4.1.2272.1.21.0.3 | NotificationrcnErrorNotification | current | A rcErrorNotification trap signifies that the SNMPv2 entity, acting in an agent role, has detected that an error condition has occured. | |
| 1.3.6.1.4.1.2272.1.21.0.4 | NotificationrcnStpNewRoot | current | A rcStpNewRoot trap signifies that the SNMPv2 entity, acting in an agent role, has detected the Spanning Tree Protocol has declared the device to be the new ro… | |
| 1.3.6.1.4.1.2272.1.21.0.5 | NotificationrcnStpTopologyChange | current | A rcStpTopologyChange trap signifies that the SNMPv2 entity, acting in an agent role, has detected the Spanning Tree Protocol has gone due a topology change ev… | |
| 1.3.6.1.4.1.2272.1.21.0.6 | NotificationrcnChasPowerSupplyDown | current | A rcChasPowerSupplyDown trap signifies that the SNMPv2 entity, acting in an agent role, has detected that the rcChasPowerSupplyOperStatus object for one of its… | |
| 1.3.6.1.4.1.2272.1.21.0.7 | NotificationrcnChasFanDown | current | A rcChasFanDown trap signifies that the SNMPv2 entity, acting in an agent role, has detected that the rcChasFanOperStatus object for one of its power supply un… | |
| 1.3.6.1.4.1.2272.1.21.0.8 | NotificationrcnLinkOscillation | current | A rcLinkOscillation trap signifies that the SNMPv2 entity, acting in an agent role, has detected an excessive number of link state transitions on the specified… | |
| 1.3.6.1.4.1.2272.1.21.0.9 | NotificationrcnMacViolation | current | A rcMacViolation trap signifies that the SNMPv2 entity, acting in an agent role, has received a PDU with an invalid source MAC address. | |
| 1.3.6.1.4.1.2272.1.21.0.10 | NotificationrcnSonetTrap | current | A rcSonetTrap trap signifies that the SNMPv2 entity, acting in an agent role, has detected a change of status on a Sonet port. | |
| 1.3.6.1.4.1.2272.1.21.0.11 | Notificationrcn2kCardDown | current | A rcCardDown trap signifies that the SNMPv2 entity, acting in an agent role, has detected that the rcCardOperStatus object for one of its cards is about to tra… | |
| 1.3.6.1.4.1.2272.1.21.0.12 | Notificationrcn2kCardUp | current | A rcCardUp trap signifies that the SNMPv2 entity, acting in an agent role, has detected that the rcCardOperStatus object for one of its cards is about to trans… | |
| 1.3.6.1.4.1.2272.1.21.0.13 | Notificationrcn2kTemperature | current | A rc2kTemperature trap signifies that the SNMPv2 entity, acting in an agent role, has detected the chassis is over-heating. | |
| 1.3.6.1.4.1.2272.1.21.0.14 | NotificationrcnChasPowerSupplyUp | current | A rcChasPowerSupplyUp trap signifies that the SNMPv2 entity, acting in an agent role, has detected that the rcChasPowerSupplyOperStatus object for one of its p… | |
| 1.3.6.1.4.1.2272.1.21.0.15 | Notificationrcn2kAtmPvcLinkStateChange | current | A rc2kAtmPvcLinkStateChange trap signifies that the SNMPv2 entity, acting in an agent role, has detected that the rc2kAtmPvcOamVcStatus object for one of PVC i… | |
| 1.3.6.1.4.1.2272.1.21.0.16 | NotificationrcnStpTCN | current | A rcStpTopologyChange trap signifies that the SNMPv2 entity, acting in an agent role, has detected the Spanning Tree Protocol has gone due a topology change ev… | |
| 1.3.6.1.4.1.2272.1.21.0.17 | NotificationrcnSmltIstLinkUp | current | A rcSmltIstLinkUp trap signifies that the split MLT link is from down to up. | |
| 1.3.6.1.4.1.2272.1.21.0.18 | NotificationrcnSmltIstLinkDown | current | A rcSmltIstLinkDown trap signifies that the split MLT link is from up to down. | |
| 1.3.6.1.4.1.2272.1.21.0.19 | NotificationrcnSmltLinkUp | current | A rcMltSmltId trap signifies that the split SMLT link is up. | |
| 1.3.6.1.4.1.2272.1.21.0.20 | NotificationrcnSmltLinkDown | current | A rcMltSmltId trap signifies that the split SMLT link is down. | |
| 1.3.6.1.4.1.2272.1.21.0.21 | NotificationrcnChasFanUp | current | A rcChasFanUp trap signifies that the SNMPv2 entity, acting in an agent role, has detected that the rcChasFanOperStatus object for one of its power supply unit… | |
| 1.3.6.1.4.1.2272.1.21.0.22 | NotificationrcnPasswordChange | current | A rcPasswordChange trap signifies that the SNMPv2 entity, acting in an agent role, has detected that the one of the cli password is changed. | |
| 1.3.6.1.4.1.2272.1.21.0.23 | NotificationrcnEmError | current | A rcEmError trap signifies that the SNMPv2 entity, acting in an agent role, has detected Em error. | |
| 1.3.6.1.4.1.2272.1.21.0.25 | NotificationrcnPcmciaCardRemoved | current | A rcPcmciaRemoved trap signifies that the SNMPv2 entity, acting in an agent role, has detected that the PCMCIA card is being removed. | |
| 1.3.6.1.4.1.2272.1.21.0.26 | NotificationrcnSmartCpldTimerFired | current | A rcSmartCpldTimerFired trap signifies that the cpld timer fired. | |
| 1.3.6.1.4.1.2272.1.21.0.27 | NotificationrcnCardCpldNotUpDate | current | A rcCardCpldNotUpDate trap signifies that the cpld is not up to date. | |
| 1.3.6.1.4.1.2272.1.21.0.28 | NotificationrcnIgapLogFileFull | current | A rcIgapLogFileFull trap signifies that the Igap accounting time-out Log File reach the maximum. | |
| 1.3.6.1.4.1.2272.1.21.0.29 | NotificationrcnCpLimitShutDown | current | A rcCpLimitShutDown trap signifies that the cp limit for the port is shutting down. | |
| 1.3.6.1.4.1.2272.1.21.0.30 | NotificationrcnSshServerEnabled | current | A rcSshServerEnabled trap signifies that the SSH server is enabled. | |
| 1.3.6.1.4.1.2272.1.21.0.31 | NotificationrcnSshServerDisabled | current | A rcSshServerDisabled trap signifies that the SSH server is disabled. | |
| 1.3.6.1.4.1.2272.1.21.0.32 | NotificationrcnSshSessionLogin | deprecated | A rcSshSessionLogin trap signifies that there is a SSH session login. It's deprecated by rcnaSshSessionLogin. | |
| 1.3.6.1.4.1.2272.1.21.0.33 | NotificationrcnSshSessionLogout | deprecated | A rcSshSessionLogout trap signifies that there is a SSH session logout. It's deprecated by rcnaSshSessionLogout. | |
| 1.3.6.1.4.1.2272.1.21.0.34 | NotificationrcnSshUnauthorizedAccess | deprecated | A rcSshUnauthorizedAccess trap signifies that an unauthorized access has occured. It's deprecated by rcnaSshUnauthorizedAccess | |
| 1.3.6.1.4.1.2272.1.21.0.35 | NotificationrcnHaCpuState | current | A rcHaCpuState trap signifies that the state of the HA-CPU. | |
| 1.3.6.1.4.1.2272.1.21.0.36 | NotificationrcnInsufficientMemory | current | A rcInsufficientMemory trap indicates insufficient memory on CPU blade for proper operation. Recommended memory = 256 MB available through Nortel Networks upgr… | |
| 1.3.6.1.4.1.2272.1.21.0.37 | NotificationrcnSaveConfigAction | current | A rcSaveConfigAction trap indicates the switch run time or boot configuration is being saved | |
| 1.3.6.1.4.1.2272.1.21.0.38 | NotificationrcnLoopDetectOnPort | current | A rcLoopDetectOnPort trap indicates that a loop has been detected on a port. The vlan on that port will be disabled. | |
| 1.3.6.1.4.1.2272.1.21.0.39 | NotificationrcnbgpEstablished | current | The BGP Established event is generated when the BGP FSM enters the ESTABLISHED state. | |
| 1.3.6.1.4.1.2272.1.21.0.40 | NotificationrcnbgpBackwardTransition | current | The BGPBackwardTransition Event is generated when the BGP FSM moves from a higher numbered state to a lower numbered state. | |
| 1.3.6.1.4.1.2272.1.21.0.41 | NotificationrcnAggLinkUp | current | A rcAggLinkUp trap is generated when the operational state of the aggregator changes from down to up. | |
| 1.3.6.1.4.1.2272.1.21.0.42 | NotificationrcnAggLinkDown | current | A rcAggLinkDown trap is generated when the operational state of the aggregator changes from up to down. | |
| 1.3.6.1.4.1.2272.1.21.0.43 | NotificationrcnIgmpNewGroupMember | current | An IgmpNewGroupMember trap signifies that a new member has come on an interface. | |
| 1.3.6.1.4.1.2272.1.21.0.44 | NotificationrcnIgmpLossGroupMember | current | An IgmpLossGroupMember trap signifies that a group member has been lost on an interface. | |
| 1.3.6.1.4.1.2272.1.21.0.45 | NotificationrcnIgmpNewQuerier | current | An igmpNewQuerier trap signifies that a new querier has come up on an interface. | |
| 1.3.6.1.4.1.2272.1.21.0.46 | NotificationrcnIgmpQuerierChange | current | An rcIgmpQuerierChange trap signifies that the querier has changed. | |
| 1.3.6.1.4.1.2272.1.21.0.47 | NotificationrcnDvmrpIfStateChange | current | A rcDvmrpIfStateChange trap signifies that there has been a change in the state of a DVMRP interface. | |
| 1.3.6.1.4.1.2272.1.21.0.48 | NotificationrcnDvmrpNewNbrChange | current | A rcDvmrpNewNbrChange trap signifies that a new neighbor has come up on a DVMRP interface. | |
| 1.3.6.1.4.1.2272.1.21.0.49 | NotificationrcnDvmrpNbrLossChange | current | A rcDvmrpNbrLossChange trap signifies that a new neighbor has gone down on a DVMRP interface. | |
| 1.3.6.1.4.1.2272.1.21.0.50 | NotificationrcnPsePortOnOff | current | A rcPsePortOnOff trap signifies that if Pse Port is delivering or not power to the This Notification SHOULD be sent on every status change except in the search… | |
| 1.3.6.1.4.1.2272.1.21.0.51 | NotificationrcnPsePortPowerMaintenanceStatus | current | A rcPsePortPowerMaintenanceStatus trap signifies that a Port change Status and it SHOULD be sent on every status change. | |
| 1.3.6.1.4.1.2272.1.21.0.52 | NotificationrcnMainPseBackupActivate | current | A rcMainPseBackupActivate trap signifies that a Backup is Activated or BackUp is released on a Pse Port Group. | |
| 1.3.6.1.4.1.2272.1.21.0.53 | NotificationrcnMainPowerUsageOn | current | A rcMainPowerUsageOn trap signifies that PSE Threshold Usage indication of a PSE Port Group is on, the usage power is above the threshold. | |
| 1.3.6.1.4.1.2272.1.21.0.54 | NotificationrcnMainPowerUsageOff | current | A rcMainPowerUsageOn trap signifies that PSE Threshold Usage indication of a PSE Port Group is off, the usage power is above the threshold. | |
| 1.3.6.1.4.1.2272.1.21.0.55 | NotificationrcnPseCardOnOff | current | A rcPoeMainPwrFailure trap signifies that the main power admin status is up. | |
| 1.3.6.1.4.1.2272.1.21.0.59 | NotificationrcnFdbProtectViolation | current | The rcFdbProtectViolation trap signifies that the has violated the user configured limit for total number of fdb-entries learned on that port. | |
| 1.3.6.1.4.1.2272.1.21.0.60 | NotificationrcnLogMsgControl | current | A rcMsgControl trap signifies whether the number of times of repeatation of the particular Log message has exceeded the particular frequency/count or not. | |
| 1.3.6.1.4.1.2272.1.21.0.61 | NotificationrcnSaveConfigFile | current | A rcSaveConfig trap signifies that either the runtime config or the boot config has been saved on the switch | |
| 1.3.6.1.4.1.2272.1.21.0.62 | NotificationrcnDNSRequestResponse | current | A rcDnsRequestResponse trap signifies that the switch had sent a query to the DNS server or it had received a successful response from the DNS Server | |
| 1.3.6.1.4.1.2272.1.21.0.63 | NotificationrcnDuplicateIpAddress | current | A rcDuplicateIpAddress trap signifies that a duplicate IP address is detected on the subnet. | |
| 1.3.6.1.4.1.2272.1.21.0.64 | NotificationrcnLoopDetectPortDown | current | A rcLoopDetectPortDown trap signifies that a loop has been detected on a port and the port is going to shut down. | |
| 1.3.6.1.4.1.2272.1.21.0.65 | NotificationrcnUnauthorizedAccessToStandByCPU | current | A rcnUnauthorizedAccessToStandByCPU trap signifies that the user attempt to access standby CPU. | |
| 1.3.6.1.4.1.2272.1.21.0.67 | NotificationrcnLoopDetectMacDiscard | current | A rcLoopDetectMacDiscard trap signifies that a loop has been Detected on a port and the mac address will be discarded on all ports in that vlan | |
| 1.3.6.1.4.1.2272.1.21.0.68 | NotificationrcnAutoRecoverPort | current | A rcnAutoRecoverPort trap signifies that autorecover has re-enabled a port disabled by link flap or cp limit | |
| 1.3.6.1.4.1.2272.1.21.0.69 | NotificationrcnAutoRecoverLoopDetectedPort | current | A rcnAutoRecoverPort trap signifies that autorecover has cleared the action taken on a port by loop detect | |
| 1.3.6.1.4.1.2272.1.21.0.70 | NotificationrcnExtCpLimitShutDown | current | A rcnExtCpLimitShutDown trap signifies that port is shut down due to Extended CP-Limit. | |
| 1.3.6.1.4.1.2272.1.21.0.71 | NotificationrcnExtCpLimitSopCongestion | current | A rcnExtCpLimitSopCongestion signifies that system octapid polling finds that system octapid is congested or not. rcSysExtCplimitSysOctapidCongested signifies … | |
| 1.3.6.1.4.1.2272.1.21.0.72 | NotificationrcnNonEapIntrusion | current | A rcNonEapIntrusion trap signifies that the an intrusion has occurred in the port. This occurs when the number of non-eap clients exceed the maximum allowed no… | |
| 1.3.6.1.4.1.2272.1.21.0.74 | NotificationrcnTacacsAuthFailure | current | TACACS+ authentication failed for user | |
| 1.3.6.1.4.1.2272.1.21.0.75 | NotificationrcnTacacsNoServers | current | Unable to use any TACACS+ servers for authentication | |
| 1.3.6.1.4.1.2272.1.21.0.76 | NotificationrcnTacacsRxUnsupportedFrame | current | Received unsupported frame from TACACS+ server | |
| 1.3.6.1.4.1.2272.1.21.0.77 | NotificationrcnTacacsExceededMaxLogins | current | Attempted to exceed the maximum number of allowed TACACS+ logins | |
| 1.3.6.1.4.1.2272.1.21.0.78 | NotificationrcnTacacsClientFailure | current | TACACS+ Client application is down | |
| 1.3.6.1.4.1.2272.1.21.0.79 | NotificationrcnBpduReceived | current | This notification will be generated when a BPDU is received on a port which has BPDU filtering enabled. | |
| 1.3.6.1.4.1.2272.1.21.0.80 | NotificationrcnVlacpPortDown | current | A rcnVlacpPortDown trap signifies that Vlacp is down on the port specified. | |
| 1.3.6.1.4.1.2272.1.21.0.81 | NotificationrcnVlacpPortUp | current | A rcnVlacpPortUp trap signifies that Vlacp is Up on the port specified. | |
| 1.3.6.1.4.1.2272.1.21.0.82 | NotificationrcnExtCpLimitShutDownNormal | current | An rcnExtCpLimitShutDownNormal trap signifies that Ports are shut down due to Extended CP-Limit in Normal mode. | |
| 1.3.6.1.4.1.2272.1.21.0.83 | NotificationrcnEapMacIntrusion | current | A rcnEapMacIntrusion trap signifies that an EAP MAC intrusion has occured on this Port. | |
| 1.3.6.1.4.1.2272.1.21.0.84 | NotificationrcnInterCpuCommStatus | current | A rcnInterCpuCommStatus trap signifies the current communication status between primary and secondary CPU. | |
| 1.3.6.1.4.1.2272.1.21.0.89 | NotificationrcPlugOptModTemperatureStatusTrap | current | Used to trap changes in the temperature status | |
| 1.3.6.1.4.1.2272.1.21.0.90 | NotificationrcPlugOptModVoltageStatusTrap | current | Used to trap changes in the voltage level | |
| 1.3.6.1.4.1.2272.1.21.0.91 | NotificationrcPlugOptModBiasStatusTrap | current | Used to trap changes in the laser bias status | |
| 1.3.6.1.4.1.2272.1.21.0.92 | NotificationrcPlugOptModTxPowerStatusTrap | current | Used to trap changes in the transmit power status | |
| 1.3.6.1.4.1.2272.1.21.0.93 | NotificationrcPlugOptModRxPowerStatusTrap | current | Used to trap changes in the received power status | |
| 1.3.6.1.4.1.2272.1.21.0.94 | NotificationrcPlugOptModAux1StatusTrap | current | Used to trap changes in the Aux1 status | |
| 1.3.6.1.4.1.2272.1.21.0.95 | NotificationrcPlugOptModAux2StatusTrap | current | Used to trap changes in the Aux2 status | |
| 1.3.6.1.4.1.2272.1.21.0.110 | NotificationrcnMaxRouteWarnClear | current | A rcnMaxRouteWarnClear trap signifies that the number of routes in the routing table of the Virtual Router has droped below its warning threshold. | |
| 1.3.6.1.4.1.2272.1.21.0.111 | NotificationrcnMaxRouteWarnSet | current | A rcnMaxRouteWarnSet trap signifies that the given Virtual Routers routing table is reaching its maximum size. Action should be taken to prevent this | |
| 1.3.6.1.4.1.2272.1.21.0.112 | NotificationrcnMaxRouteDropClear | current | A rcnMaxRouteDropClear signifies that the given Virtual Routers routing table is no longer dropping new routes as it is below its maximum size. | |
| 1.3.6.1.4.1.2272.1.21.0.113 | NotificationrcnMaxRouteDropSet | current | A rcnMaxRouteDropSet trap signifies that the given Virtual Routers routing table has reached its maximum size, and is now dropping all new non static routes. | |
| 1.3.6.1.4.1.2272.1.21.0.114 | NotificationrcnTrialPeriodExpired | current | Trial period expired. | |
| 1.3.6.1.4.1.2272.1.21.0.115 | NotificationrcnVrfForwardingEnabled | current | A rcnVrfForwardingEnable trap signifies that the given Virtual Router's route forwarding is enabled. The VRF is functioning normally. | |
| 1.3.6.1.4.1.2272.1.21.0.116 | NotificationrcnVrfForwardingDisabled | current | A rcnVrfForwardingDisabletrap signifies that the given Virtual Router's route forwarding is disabled. The VRF is no longer forwarding routes. | |
| 1.3.6.1.4.1.2272.1.21.0.117 | NotificationrcnMstpNewCistRoot | current | A rcMstpNewCistRoottrap signifies that the SNMPv2 entity, acting in an agent role, has detected the Multiple Spanning Tree Protocol has declared the device to … | |
| 1.3.6.1.4.1.2272.1.21.0.118 | NotificationrcnMstpNewMstiRoot | current | A rcMstpNewMstiRoot signifies that the SNMPv2 entity, acting in an agent role, has detected the Multiple Spanning Tree Protocol has declared the device to be t… | |
| 1.3.6.1.4.1.2272.1.21.0.119 | NotificationrcnMstpNewCistRegionalRoot | current | A rcMstpNewCistRegionalRoottrap signifies that the SNMPv2 entity, acting in an agent role, has detected the Multiple Spanning Tree Protocol has declared the de… | |
| 1.3.6.1.4.1.2272.1.21.0.120 | NotificationrcnRstpNewRoot | current | A rcRstpNewRoot signifies that the SNMPv2 entity, acting in an agent role, has detected the Rapid Spanning Tree Protocol has declared the device to be the new … | |
| 1.3.6.1.4.1.2272.1.21.0.121 | NotificationrcnIgmpNewQuerierOnIf | current | An igmpNewQuerier trap signifies that a new querier has come up on an interface. | |
| 1.3.6.1.4.1.2272.1.21.0.122 | NotificationrcnIgmpQuerierChanged | current | An rcIgmpQuerierChange trap signifies that the querier has changed. | |
| 1.3.6.1.4.1.2272.1.21.0.123 | NotificationrcnDuplexMismatch | current | A rcnDuplexMismatch trap signifies that a LLDP Neighbor Port's Duplex/Speed mismatchs with local port | |
| 1.3.6.1.4.1.2272.1.21.0.124 | NotificationrcnRsmltEdgePeerModified | current | A rcnRsmltEdgePeerModified signifies that the RSMLT Peer address is different from that of the stored address. Save config is necessary if EdgeSupport has to u… | |
| 1.3.6.1.4.1.2272.1.21.0.125 | Notificationrcn2kLinkDownTrap | current | A linkDown trap signifies that the SNMP entity, acting in an agent role, has detected that the ifOperStatus object for one of its communication links is about … | |
| 1.3.6.1.4.1.2272.1.21.0.126 | Notificationrcn2kLinkUpTrap | current | A linkUp trap signifies that the SNMP entity, acting in an agent role, has detected that the ifOperStatus object for one of its communication links left the do… | |
| 1.3.6.1.4.1.2272.1.21.0.130 | NotificationrcnPbtUnknownDiscardTrap | current | The number of UnknownMac Discard exceeded the threshold. Make sure that the FDB entry exists for specified vlan and that the port is a member of the vlan. The … | |
| 1.3.6.1.4.1.2272.1.21.0.131 | NotificationrcnPbtUnknownDiscardClearTrap | current | The number of UnknownMac Discard exceeded the threshold. Make sure that the FDB entry exists for specified vlan and that the port is a member of the vlan. The … | |
| 1.3.6.1.4.1.2272.1.21.0.132 | Notificationrcn2kQosDropTrap | current | Drop count of packets for a specific QoS level has exceeded the configured threshold | |
| 1.3.6.1.4.1.2272.1.21.0.133 | Notificationrcn2kQosDropClearTrap | current | Drop count of packets for a specific QoS level is with in the limits. Clears rcTrapsMib 132. | |
| 1.3.6.1.4.1.2272.1.21.0.143 | Notificationrcn2kGbicRemovedTrap | current | A rcGbicRemoved trap signifies that the SNMPv2 entity, acting in an agent role, has detected that the an Xfp/Sfp is removed from the specified slot and port. | |
| 1.3.6.1.4.1.2272.1.21.0.144 | Notificationrcn2kGbicInsertedTrap | current | A rcGbicInserted trap signifies that the SNMPv2 entity, acting in an agent role, has detected that the an Xfp/Sfp is inserted to the specified slot and port. | |
| 1.3.6.1.4.1.2272.1.21.0.145 | Notificationrcn2kCardDownExpandedTrap | current | A rcCardDown trap signifies that the SNMPv2 entity, acting in an agent role, has detected that the rcCardOperStatus object for one of its cards is about to tra… | |
| 1.3.6.1.4.1.2272.1.21.0.146 | Notificationrcn2kCardUpExpandedTrap | current | A rcCardUp trap signifies that the SNMPv2 entity, acting in an agent role, has detected that the rcCardOperStatus object for one of its cards is about to trans… | |
| 1.3.6.1.4.1.2272.1.21.0.147 | NotificationrcnCSUStartTrap | current | A rcCSUStartTrap trap signifies that the controlled software upgrade has started in the specified mode | |
| 1.3.6.1.4.1.2272.1.21.0.148 | NotificationrcnCSUEndTrap | current | A rcCSUEndTrap trap signifies that the controlled software upgrade has ended in the specified mode | |
| 1.3.6.1.4.1.2272.1.21.0.149 | NotificationrcnCSUCardResetStartTrap | current | A rcCSUCardResetStartTrap trap signifies that the card in the specified slot reset process has started as part of the CSU | |
| 1.3.6.1.4.1.2272.1.21.0.150 | NotificationrcnCSUCardResetEndTrap | current | A rcCSUCardResetEndTrap trap signifies that the card in the specified slot reset process has ended as part of the CSU | |
| 1.3.6.1.4.1.2272.1.21.0.151 | NotificationrcnCSUInProgressTrap | current | A rcCSUInProgressTrap signifies that the CSU in progress and some cards need to be upgraded | |
| 1.3.6.1.4.1.2272.1.21.0.160 | NotificationrcnMltLinkUp | current | A rcMltLinkUp trap signifies that the MLT link is up. | |
| 1.3.6.1.4.1.2272.1.21.0.161 | NotificationrcnMltLinkDown | current | A rcMltLinkDown trap signifies that the MLT link is down. | |
| 1.3.6.1.4.1.2272.1.21.0.162 | NotificationrcnLinkBadConnection | current | A rcnLinkBadConnection trap signifies that the SNMPv2 entity, acting in an agent role, has detected a bad fiber connection to the receiver on the specified por… | |
| 1.3.6.1.4.1.2272.1.21.0.163 | NotificationrcnMcInRecMoreThanThreshold | current | An rcnMcInRecMoreThanThreshold signifies that number of MC Ingress records has exceeded the configured ingress-threshold. | |
| 1.3.6.1.4.1.2272.1.21.0.164 | NotificationrcnMcEgRecMoreThanThreshold | current | An rcnMcEgRecMoreThanThreshold signifies that number of MC Egress records has exceeded the configured Egress-threshold. | |
| 1.3.6.1.4.1.2272.1.21.0.165 | NotificationrcnTmuxParityError | current | A rcnTmuxParityError trap identifies a problem in the FAD /SWIP based on the number of parity errors. | |
| 1.3.6.1.4.1.2272.1.21.0.167 | NotificationrcnChasPowerSupplyNoRedundancy | current | A rcnChasPowerSupplyNoRedundancy signifies that the chassis is running on power supply without redundancy. | |
| 1.3.6.1.4.1.2272.1.21.0.168 | NotificationrcnChasPowerSupplyRedundancy | current | A rcnChasPowerSupplyRedundancy signifies that the chassis is running on power supply with redundancy. | |
| 1.3.6.1.4.1.2272.1.21.0.169 | NotificationrcnPortAdminStatusChangeTrap | current | In an event of admin status change from enable to disable or vice-versa, this trap is sent to notify change in admin status | |
| 1.3.6.1.4.1.2272.1.21.0.170 | NotificationrcnSaveConfigFailTrap | current | A rcnSaveConfigFail trap signifies that the runtime config save is unsuccessful on the switch | |
| 1.3.6.1.4.1.2272.1.21.0.171 | NotificationrcnLicenseTrialPeriodExpired | current | A rcnLicenseTrialPeriodExpired signifies that Trial Period License has expired. | |
| 1.3.6.1.4.1.2272.1.21.0.172 | NotificationrcnLicenseTrialPeriodExpiry | current | A rcnLicenseTrialPeriodExpiry signifies the time remaining before License Trial Period expires in days. | |
| 1.3.6.1.4.1.2272.1.21.0.173 | NotificationrcnVrfUp | current | This notification is generated when the specified VRF's operational status is toggled from down to up. | |
| 1.3.6.1.4.1.2272.1.21.0.174 | NotificationrcnVrfDown | current | This notification is generated when the specified VRF's operational status is toggled from up to down. | |
| 1.3.6.1.4.1.2272.1.21.0.175 | NotificationrcnMrouteIngressThresholdExceeded | current | This notification is generated when the number of mroute ingress records exceeds the ingress threshold. | |
| 1.3.6.1.4.1.2272.1.21.0.176 | NotificationrcnMrouteEgressThresholdExceeded | current | This notification is generated when the number of mroute egress records exceeds the egress threshold. | |
| 1.3.6.1.4.1.2272.1.21.0.177 | NotificationrcnRemoteMirroringStatus | current | A rcRemoteMirroringStatus trap signifies whether the remote mirroring is enabled or disabled on a particular port | |
| 1.3.6.1.4.1.2272.1.21.0.178 | NotificationrcnMaxMrouteWarnSet | current | A rcnMaxMrouteWarnSet trap signifies that the given Virtual Routers multicast routing table is reaching its maximum size. Action should be taken to prevent this | |
| 1.3.6.1.4.1.2272.1.21.0.179 | NotificationrcnMaxMrouteDropSet | current | A rcnMaxMrouteDropSet trap signifies that the given Virtual Routers multicast routing table has reached its maximum size, and is now dropping all new non stati… | |
| 1.3.6.1.4.1.2272.1.21.0.180 | NotificationrcnMaxMrouteWarnClear | current | A rcnMaxMrouteWarnClear trap signifies that the number of routes in the multicast routing table of the Virtual Router has dropped below its warning threshold. | |
| 1.3.6.1.4.1.2272.1.21.0.181 | NotificationrcnMaxMrouteDropClear | current | A rcnMaxMrouteDropClear trap signifies that the given Virtual Routers multicast routing table is no longer dropping new routes as it is below its maximum size. | |
| 1.3.6.1.4.1.2272.1.21.0.182 | NotificationrcnAggLinkStateChange | current | The trap is generated when the operational state of the LAG changes; it identifies three events: local down, remote down, up. | |
| 1.3.6.1.4.1.2272.1.21.0.183 | NotificationrcnBfdSessExceedThreshold | deprecated | A rcnBfdSessExceedThreshold signifies that the BFD session have exceed system limit and hence creation of new session failed.Deprecated by rcnaBfdSessExceedThr… | |
| 1.3.6.1.4.1.2272.1.21.0.184 | NotificationrcnBfdStatusChange | deprecated | A rcnBfdSessChange signifies that the status of BFD session changed.Deprecated by rcnaBfdNewStatusChange | |
| 1.3.6.1.4.1.2272.1.21.0.185 | NotificationrcnChasPowerSupplyRunningLow | current | A rcnChasPowerSupplyRunningLow signifies that the chassis is running on low power supply. | |
| 1.3.6.1.4.1.2272.1.21.0.188 | NotificationrcnTosBufferLimitTrap | current | A TOS Buffer limit trap signifies that the TOS Buffer value does not fall within the permissible limit | |
| 1.3.6.1.4.1.2272.1.21.0.189 | NotificationrcnTosBufferClearTrap | current | A TOS Buffer clear trap signifies that the TOS Buffer corruption is now cleared | |
| 1.3.6.1.4.1.2272.1.21.0.190 | NotificationrcnChasCoolingInsufficientTrap | current | A rcnChasCoolingInsufficientTrap trap signifies that the fan tray(s) is not providing sufficient cooling power for the chassis configuration and that a fan tra… | |
| 1.3.6.1.4.1.2272.1.21.0.191 | NotificationrcnChasCoolingSufficientTrap | current | rcnChasCoolingSufficientTrap trap signifies that the fan tray(s) is now providing sufficient cooling power for the chassis. Clears rcnChasCoolingInsufficientTr… | |
| 1.3.6.1.4.1.2272.1.21.0.192 | NotificationrcnIsisPlsbMetricMismatchTrap | current | A PLSB ISIS trap signifies that a LSP with a different value of l1-metric is received | |
| 1.3.6.1.4.1.2272.1.21.0.193 | NotificationrcnIsisPlsbDuplicateSysidTrap | current | A PLSB ISIS trap signifies that a Hello packet with a duplicate system-id is received | |
| 1.3.6.1.4.1.2272.1.21.0.194 | NotificationrcnIsisPlsbLsdbUpdateTrap | current | A PLSB ISIS trap signifies that LSDB information has changed | |
| 1.3.6.1.4.1.2272.1.21.0.195 | NotificationrcnIsisPlsbDuplicateNicknameTrap | current | A PLSB ISIS trap signifies that a LSP with duplicate nickname is received | |
| 1.3.6.1.4.1.2272.1.21.0.196 | NotificationrcnChasFanCoolingLow | current | A rcnChasFanCoolingLow signifies that the chassis is running on low fan cooling. | |
| 1.3.6.1.4.1.2272.1.21.0.199 | NotificationrcnRSlotFabricActiveTrap | current | A rcnTripodSlotRStateActiveTrap signifies that Slot R mapped to Slot 5 or Slot 6. | |
| 1.3.6.1.4.1.2272.1.21.0.200 | NotificationrcnRSlotFabricInactiveTrap | current | A rcnTripodSlotRStateInactiveTrap signifies that Slot R unmapped from Slot 5 or Slot 6. | |
| 1.3.6.1.4.1.2272.1.21.0.201 | NotificationrcnLockupDetected | current | A rcnLockupDetected trap identifies a lock-up in the specified module and requests the user to take corrective action | |
| 1.3.6.1.4.1.2272.1.21.0.202 | NotificationrcnMacResetForLockup | current | A rcnMacResetForLockup trap is sent when lock-up was detected in a slot and a mac reset has been done as a corrective action. | |
| 1.3.6.1.4.1.2272.1.21.0.203 | NotificationrcnModuleResetForLockup | current | A rcnModuleResetForLockup trap is sent when lock-up was detected in a slot and a module has been reset as a corrective action. | |
| 1.3.6.1.4.1.2272.1.21.0.204 | NotificationrcnModuleFatalError | current | A rcnModuleFatalError trap is sent when a fatal error is detected in a module and the user has to take corrective action. | |
| 1.3.6.1.4.1.2272.1.21.0.205 | NotificationrcnSmpFtpFail | current | A rcnSmpFtpFail trap signifies that Ftp/Tftp of a logfile has failed in SMP (System Messagin Platform). Ftp of a logfile fails when configured remote server is… | |
| 1.3.6.1.4.1.2272.1.21.0.206 | NotificationrcnSmpLogFileDeleted | current | A rcnSmpLogFileDeleted trap signifies that a logfile has been deleted from PCMCIA. Deletion of a logfile happens when either FTP of the logfile is successful o… | |
| 1.3.6.1.4.1.2272.1.21.0.207 | NotificationrcnUpgradeSuccessful | current | A rcnUpgradeSuccessful signifies that The switch upgraded successfully. | |
| 1.3.6.1.4.1.2272.1.21.0.208 | NotificationrcnUpgradeFailure | current | A rcnUpgradeFailure signifies that The switch upgrade failed. | |
| 1.3.6.1.4.1.2272.1.21.0.209 | NotificationrcnVersionMisMatch | current | A rcnVersionMisMatch signifies that The switch has CPUs on different software versions. | |
| 1.3.6.1.4.1.2272.1.21.0.210 | NotificationrcnHighCopUtil | current | A rcnHighCopUtil signifies that the COP utilization has exceeded for a given slot above the defined thereshold limits | |
| 1.3.6.1.4.1.2272.1.21.0.228 | NotificationrcnUpgradeSuccessfulAckRequired | current | A rcnUpgradeSuccessful signifies that The switch upgraded successfully and acknowlwedgement is required. | |
| 1.3.6.1.4.1.2272.1.21.0.231 | NotificationrcnLacpNegotiated | current | A rcnLacpNegotiation signifies if Lacp negotiation successful between link on both ends | |
| 1.3.6.1.4.1.2272.1.21.0.232 | NotificationrcnLacpNotNegotiated | current | A rcnLacpNotNegotiation signifies if LACP not negotiated | |
| 1.3.6.1.4.1.2272.1.21.0.233 | NotificationrcnCtrlPktRateLimitDropTrap | current | This trap indicates that the number of control packets on the port has exceeded the configured drop limit. | |
| 1.3.6.1.4.1.2272.1.21.0.234 | NotificationrcnCtrlPktRateLimitDropClearTrap | current | This trap indicates that the count of Control Packets on the port had exceeded the configured drop limit and is currently within the configured limits. Clears … | |
| 1.3.6.1.4.1.2272.1.21.0.235 | NotificationrcnCtrlPktRateLimitShutdownTrap | current | This trap indicates that the count of Control Packets on the port has exceeded the configured shutdown limit. | |
| 1.3.6.1.4.1.2272.1.21.0.236 | NotificationrcnCtrlPktRateLimitShutdownClearTrap | current | This trap indicates that the count of Control Packets on the port had exceeded the configured shutdown limit and is currently within the configured limits. Cle… | |
| 1.3.6.1.4.1.2272.1.21.0.258 | NotificationrcnAutoSaveFailed | current | A rcnAutoSaveFailed signifies that Autosave of the configurations on the switch failed because of the lack of storage space. | |
| 1.3.6.1.4.1.2272.1.21.0.265 | NotificationrcnLegacyCardDetected | current | A rcnLegacyCardDetected trap signifies that a legacy card has been detected on the cahssis, rc2kCardIndex indicates the slot number of legacy card. | |
| 1.3.6.1.4.1.2272.1.21.0.266 | NotificationrcnPrFilterRspMemoryFull | current | A rcnPrFilterRspMemoryFull trap signifies that RSP memory is full for Power Ranger filter configuration. rcPrFilterAclId indicates the ACL, on which ACL RSP me… | |
| 1.3.6.1.4.1.2272.1.21.0.267 | NotificationrcnPrFilterStatsCntExst | current | A rcnPrFilterStatsCntExst trap signifies that RSP filter stats counters have been run out. When this happens, affected filters won't get their counter updated … | |
| 1.3.6.1.4.1.2272.1.21.0.268 | NotificationrcnAuthenticationSuccess | deprecated | A rcnAuthenticationSuccess trap signifies that a login is success. Trap includes login username and host ip It's deprecated by rcnaAuthenticationSuccess. | |
| 1.3.6.1.4.1.2272.1.21.0.269 | NotificationrcnCardInsert | current | A rcnCardInsert trap signifies that a card/module is inserted into the chassis | |
| 1.3.6.1.4.1.2272.1.21.0.270 | NotificationrcnCardRemove | current | A rcnCardRemove trap signifies that a card/module is removed from the chassis | |
| 1.3.6.1.4.1.2272.1.21.0.271 | NotificationrcnChasFanFail | current | A rcnChasFanFail trap indicates that a fan unit of a fan tray in a fan zone has fault. | |
| 1.3.6.1.4.1.2272.1.21.0.272 | NotificationrcnChasFanOk | current | A rcnChasFanOk trap indicates that a fan unit of a fan tray in a fan zone has recovered from previously detected fan fault. | |
| 1.3.6.1.4.1.2272.1.21.0.273 | NotificationrcnCardOverheat | deprecated | A rcnCardOverheat trap indicates that a card temperature has exceeded the alarm threshold temperature. Starting from VSP9K 4.0 release, a new rcn2kCardOverheat… | |
| 1.3.6.1.4.1.2272.1.21.0.274 | NotificationrcnCardNormalTemp | deprecated | A rcnCardNormalTemp trap indicates that a card temperature has been cool down from previously detected overheat condition. Starting from VSP9K 4.0 release, a n… | |
| 1.3.6.1.4.1.2272.1.21.0.275 | NotificationrcnCardOverheatShutDown | deprecated | A rcnCardOverheatShutDown trap indicates that a card has been shut down due to persistent temperature overheat for 15 minutes or temperature has exceeded the s… | |
| 1.3.6.1.4.1.2272.1.21.0.276 | NotificationrcnCardCpuUtilizationHigh | current | A rcnCardCpuUtilizationHigh trap indicates that 5-minute CPU utilization average on this slot is above 90%. | |
| 1.3.6.1.4.1.2272.1.21.0.277 | NotificationrcnCardCpuUtilizationNormal | current | A rcnCardCpuUtilizationNormal trap indicates that 5-minute CPU utilization average on this slot is below 75%. | |
| 1.3.6.1.4.1.2272.1.21.0.278 | NotificationrcnIsisPlsbBvidMismatchTrap | current | A PLSB ISIS trap signifies that a Hello packet with mismatched B-VIDs is received | |
| 1.3.6.1.4.1.2272.1.21.0.279 | NotificationrcnIsisPlsbSmltVirtBmacMismatchTrap | current | A PLSB ISIS trap signifies that Virtual BMAC configured in the switch is different from virtual BMAC configured in the IST peer | |
| 1.3.6.1.4.1.2272.1.21.0.280 | NotificationrcnIsisPlsbSmltPeerBmacMismatchTrap | current | A PLSB ISIS trap signifies that either the Smlt Peer BMAC configured in the IST peer is different from the ISIS SystemId of the local switch OR The Smlt peer B… | |
| 1.3.6.1.4.1.2272.1.21.0.281 | NotificationrcnIsisPlsbAdjStateTrap | current | A PLSB ISIS trap signifies ISIS adjacency state change. | |
| 1.3.6.1.4.1.2272.1.21.0.282 | NotificationrcnIsisPlsbDuplicateNnameTrap | current | A PLSB ISIS trap signifies that a LSP with duplicate nickname is received, this trap should be generated by all the switches in the network. | |
| 1.3.6.1.4.1.2272.1.21.0.283 | NotificationrcnIsisPlsbSmltSplitBebMismatchTrap | current | A PLSB ISIS trap signifies that the Smlt Split-Beb configured in the local switch and IST peer are same. One IST switch shoule be configured as Split-Beb prima… | |
| 1.3.6.1.4.1.2272.1.21.0.284 | NotificationrcnIsisPlsbMultiLinkAdjTrap | current | A PLSB ISIS trap signifies that multiple ISIS adjacencies are formed with the same ISIS node. | |
| 1.3.6.1.4.1.2272.1.21.0.285 | NotificationrcnaSshSessionLogout | current | A rcnaSshSessionLogout trap signifies that there is a SSH session logout. This trap deprecates the rcnSshSessionLogout trap. | |
| 1.3.6.1.4.1.2272.1.21.0.286 | NotificationrcnaSshUnauthorizedAccess | current | A rcnaSshUnauthorizedAccess trap signifies that an unauthorized access has occured. This trap deprecates the rcnSshUnauthorizedAccess trap. | |
| 1.3.6.1.4.1.2272.1.21.0.287 | NotificationrcnaAuthenticationSuccess | current | A rcnaAuthenticationSuccess trap signifies that a login is success. Trap includes login username and address type and inet address. This trap deprecates the rc… | |
| 1.3.6.1.4.1.2272.1.21.0.288 | NotificationrcnaSshSessionLogin | current | A rcnaSshSessionLogin trap signifies that there is a SSH session login. This trap deprecates the rcnSshSessionLogin trap. | |
| 1.3.6.1.4.1.2272.1.21.0.289 | NotificationrcnVLacpFlapDetectShutDown | current | A rcVlacpFlapDetectShutDown trap signifies that the port is shut down because rcPortVLacpFlapFrequency number of VLACP flaps were detected within rcPortVLacpFl… | |
| 1.3.6.1.4.1.2272.1.21.0.290 | NotificationrcnWlanTrap | current | A trap for WLAN to report errors | |
| 1.3.6.1.4.1.2272.1.21.0.291 | NotificationrcnAuthenticationFailureLoginAttemptsTrap | current | An rcnAuthenticationFailureLoginAttemptsTrap signifies an unsuccessful login attempt by a user beyond the maximum number of allowed login attempts. | |
| 1.3.6.1.4.1.2272.1.21.0.292 | NotificationrcnUserAccountIdleTimeExpireTrap | current | An rcnUserAccountIdleTimeExpireTrap signifies that a user did not login within the idle time configured and the account will not be disable. | |
| 1.3.6.1.4.1.2272.1.21.0.293 | NotificationrcnBfdNewStatusChange | deprecated | A rcnBfdNewStatusChange signifies that the status of BFD session changed.Deprecated by rcnaBfdNewStatusChange. | |
| 1.3.6.1.4.1.2272.1.21.0.294 | NotificationrcnLacpMisconfig | current | A link aggregation misconfiguration trap signifies that, this port is receiving LACP PDU without LACP being configured completely. | |
| 1.3.6.1.4.1.2272.1.21.0.295 | NotificationrcnSlotPowerAvailableTrap | current | A rcnSlotPowerAvailable trap signifies whether there are enough power to boot up card in slot. | |
| 1.3.6.1.4.1.2272.1.21.0.296 | NotificationrcnaBfdStatusChange | current | A rcnaBfdNewStatusChange signifies that the status of BFD session changed. rcBfdTmpSessAddrType indicates the address type for rcBfdTmpSessAddr and rcBfdTmpSes… | |
| 1.3.6.1.4.1.2272.1.21.0.297 | NotificationrcnaBfdSessExceedThreshold | current | A rcnaBfdSessExceedThreshold signifies that the BFD session has exceeded system limit and hence creation of new session failed.This trap deprecates rcnBfdSessE… | |
| 1.3.6.1.4.1.2272.1.21.0.298 | Notificationrcn2kCardShutDownTrap | current | A rcn2kCardShutDown trap signifies card shutting down reason. | |
| 1.3.6.1.4.1.2272.1.21.0.299 | NotificationrcMaxMacEntriesTrap | current | A rcMaxMacEntries trap signifies that the SNMPv2 entity, acting in an agent role, has detected that the maximum number of supported Mac Entries(64000) has been… | |
| 1.3.6.1.4.1.2272.1.21.0.300 | Notificationrcn2kCardOverheat | current | A rcn2kCardOverheat trap indicates that the card temperature has exceeded the alarm threshold temperature. This trap will be followed by the rcn2kCardZoneOverh… | |
| 1.3.6.1.4.1.2272.1.21.0.301 | Notificationrcn2kCardZoneOverheat | current | A rcn2kCardZoneOverheat trap indicates which zone on the card has exceeded the alarm threshold temperature. | |
| 1.3.6.1.4.1.2272.1.21.0.302 | Notificationrcn2kCardZoneNormalTemp | current | A rcn2kCardZoneNormalTemp trap indicates that a zone temperature on the card has cooled down from a previously detected overheat condition. | |
| 1.3.6.1.4.1.2272.1.21.0.303 | Notificationrcn2kCardNormalTemp | current | A rcn2kCardNormalTemp trap indicates that the card temperature has cooled down from a previously detected overheat condition. This trap is generated only after… | |
| 1.3.6.1.4.1.2272.1.21.0.304 | Notificationrcn2kCardOverheatShutDown | current | A rcn2kCardOverheatShutDown trap indicates that a card has been shut down because the temperature has exceeded the shut down threshold temperature. This trap i… | |
| 1.3.6.1.4.1.2272.1.21.0.305 | NotificationrcnIsisSpbmSmltVirtBmacMisconfigTrap | current | A SPBM ISIS trap signifies that SMLT virtual BMAC has been used by nodes other than the SMLT boxes as system-id or MAC. | |
| 1.3.6.1.4.1.2272.1.21.0.306 | NotificationrcnPortChannelizedStateChangeTrap | current | A rcnPortChannelizedStateChangeTrap trap signifies that a port channelized state has changed by enabling/disabling from admin. | |
| 1.3.6.1.4.1.2272.1.21.0.307 | NotificationrcnDNSv6RequestResponseTrap | current | A rcDnsv6RequestResponseTrap trap signifies that the switch had sent a query to the DNS server or it had received a successful response from the DNS Server | |
| 1.3.6.1.4.1.2272.1.21.0.308 | NotificationrcnMldNewGroupMemberTrap | current | An MldNewGroupMember trap signifies that a new member has come on an interface. | |
| 1.3.6.1.4.1.2272.1.21.0.309 | NotificationrcnMldLossGroupMemberTrap | current | An MldLossGroupMember trap signifies that a group member has been lost on an interface. | |
| 1.3.6.1.4.1.2272.1.21.0.310 | NotificationrcnMldNewQuerierTrap | current | An mldNewQuerier trap signifies that a new querier has come up on an interface. | |
| 1.3.6.1.4.1.2272.1.21.0.311 | NotificationrcnMldQuerierChangeTrap | current | An rcMldQuerierChange trap signifies that the querier has changed. | |
| 1.3.6.1.4.1.2272.1.21.0.312 | NotificationrcnIsisPlsbGlobalDuplicateSysidTrap | current | A PLSB ISIS trap signifies that a remote node is detected with same system-id as the local node. ISIS disabled globally. | |
| 1.3.6.1.4.1.2272.1.21.0.313 | NotificationrcnMRouteIpv6IngressThresholdExceeded | current | This notification is generated when the number of mroute6 ingress records exceeds the ingress threshold. | |
| 1.3.6.1.4.1.2272.1.21.0.314 | NotificationrcnMRouteIpv6EgressThresholdExceeded | current | This notification is generated when the number of mroute6 egress records exceeds the egress threshold. | |
| 1.3.6.1.4.1.2272.1.21.0.315 | NotificationrcnIsisPlsbLocalDuplicateNnameTrap | current | A PLSB ISIS trap signifies that our old incarnation of the LSP with different Sys-Id with the same nickname has not timed out yet. ISIS disabled globally. | |
| 1.3.6.1.4.1.2272.1.21.0.316 | NotificationrcnIsisPlsbGlobalDuplicateNnameTrap | current | A PLSB ISIS trap signifies that a remote node is detected with same nickname as the local node. ISIS disabled globally. | |
| 1.3.6.1.4.1.2272.1.21.0.317 | NotificationrcnPlugModInsertedInNotRecommendedPortTrap | current | A rcnPlugModInsertedInNotRecommendedPortTrap signifies that the LR4 QSFP+ is inserted in to a not recommended port. It set alaem which will be cleared by rcnPl… | |
| 1.3.6.1.4.1.2272.1.21.0.318 | NotificationrcnPlugModRemovedFromNotRecommendedPortTrap | current | A rcnPlugModRemovedFromNotRecommendedPortTrap signifies that the LR4 QSFP+ is removed from a not recommened port. It clears the alarm which is set by rcnPlugMo… | |
| 1.3.6.1.4.1.2272.1.21.0.319 | NotificationrcnBpduGuardPortShutdown | current | This notification will be generated when a port, which has BPDU guard enabled, is shutdown. It is cleared by rcnBpduGuardPortShutdownTimerExpired | |
| 1.3.6.1.4.1.2272.1.21.0.320 | NotificationrcnBpduGuardPortShutdownTimerExpired | current | This notification will be generated when a port, which has BPDU guard enabled and is under shutdown timer, and the timer expires. It clears the alarm rcnBpduGu… | |
| 1.3.6.1.4.1.2272.1.21.0.321 | NotificationrcnIpv6FhsSnoopTableFullTrap | current | This trap is generated whenever static or dynamic binding entry count has reached their max number. rcDhcpv6SnoopingNotificationBindingEntryType indicates the … | |
| 1.3.6.1.4.1.2272.1.21.0.323 | NotificationrcnLicenseWillExpire | current | This notification signifies the time remaining before Time Based License expires in days. | |
| 1.3.6.1.4.1.2272.1.21.0.324 | NotificationrcnLicenseExpired | current | A rcnLicenseTrialPeriodExpired signifies that has expired in days. | |
| 1.3.6.1.4.1.2272.1.21.0.325 | NotificationrcnMsdpMaxSACacheWarnSetTrap | current | This event is generated when the SA entries in the cache database exceeds 85 % of maximum value (6K) in local cache or in foreign cache. | |
| 1.3.6.1.4.1.2272.1.21.0.326 | NotificationrcnMsdpMaxSACacheWarnClearTrap | current | This event is generated when the Sa entries in the cache database drops to 80 % of the maximum value (6K). | |
| 1.3.6.1.4.1.2272.1.21.0.327 | NotificationrcnMsdpMaxSACacheErrorSetTrap | current | This event is generated when the SA entries in the cache database hits 100 % of the maximum value (6K). | |
| 1.3.6.1.4.1.2272.1.21.0.328 | NotificationrcnMsdpMaxSACacheErrorClearTrap | current | This event is generated when the SA entries in the cache database drops to 95% of the maximum value. | |
| 1.3.6.1.4.1.2272.1.21.0.329 | NotificationrcnMsdpMaxPeerSACacheWarnSetTrap | current | This event is generated when the SA entries for this peer exceeds 85 % of maximum value configured for this peer. | |
| 1.3.6.1.4.1.2272.1.21.0.330 | NotificationrcnMsdpMaxPeerSACacheWarnClearTrap | current | This event is generated when the SA entries for this peer drops to 80 % of the maximum value configured for this peer. | |
| 1.3.6.1.4.1.2272.1.21.0.331 | NotificationrcnMsdpMaxPeerSACacheErrorSetTrap | current | This event is generated when the SA entries for this peer hits 100 % of the peer SA limit. | |
| 1.3.6.1.4.1.2272.1.21.0.332 | NotificationrcnMsdpMaxPeerSACacheErrorClearTrap | current | This event is generated when the SA entries for this peer drops to 95% of the peer SA limit. | |
| 1.3.6.1.4.1.2272.1.21.0.333 | NotificationrcnMsdpEstablishedTrap | current | The MSDP Established event is generated when the MSDP FSM enters the ESTABLISHED state. | |
| 1.3.6.1.4.1.2272.1.21.0.334 | NotificationrcnMsdpBackwardTransitionTrap | current | The MSDPBackwardTransition Event is generated when the MSDP FSM moves from a higher-numbered state to a lower-numbered state. | |
| 1.3.6.1.4.1.2272.1.21.0.335 | NotificationrcnSystemUsbInternalAccessErrorTrap | current | This trap is generated whenever system usb encounters an internal ccess errors | |
| 1.3.6.1.4.1.2272.1.21.0.336 | NotificationrcnDigitalCertStatusTrap | current | A rcDigitalCertStatusTrap signifies the status of Subject Certificate has changed | |
| 1.3.6.1.4.1.2272.1.21.0.341 | NotificationrcnDvrVistPeerDomainMismatchErrorTrap | current | This trap is generated whenever V-IST link comes up between two DVR peers that are in different DVR domains | |
| 1.3.6.1.4.1.2272.1.21.0.342 | NotificationrcnDvrVistPeerDomainMismatchErrorClearTrap | current | This trap is generated whenever the erroneous condition of having a V-IST link up between two DVR peers from different DVR domains is cleared | |
| 1.3.6.1.4.1.2272.1.21.0.344 | NotificationrcnRadiusEapRAVError | current | This notification indicates that an Eap/Neap client MAC address was authorized on a port, but the port could not be moved to the Radius-Assigned VLAN. | |
| 1.3.6.1.4.1.2272.1.21.0.345 | NotificationrcnRadiusEapServersDown | current | This notification is generated when all EAP Radius servers become unreachable. | |
| 1.3.6.1.4.1.2272.1.21.0.346 | NotificationrcnRadiusEapServerUp | current | This notification is generated when at least one EAP Radius server becomes reachable. | |
| 1.3.6.1.4.1.2272.1.21.1 | NotificationrcCardDown | current | A rcCardDown trap signifies that the SNMPv2 entity, acting in an agent role, has detected that the rcCardOperStatus object for one of its cards is about to tra… | |
| 1.3.6.1.4.1.2272.1.21.2 | NotificationrcCardUp | current | A rcCardUp trap signifies that the SNMPv2 entity, acting in an agent role, has detected that the rcCardOperStatus object for one of its cards is about to trans… | |
| 1.3.6.1.4.1.2272.1.21.3 | NotificationrcErrorNotification | current | A rcErrorNotification trap signifies that the SNMPv2 entity, acting in an agent role, has detected that an error condition has occured. | |
| 1.3.6.1.4.1.2272.1.21.4 | NotificationrcStpNewRoot | current | A rcStpNewRoot trap signifies that the SNMPv2 entity, acting in an agent role, has detected the Spanning Tree Protocol has declared the device to be the new ro… | |
| 1.3.6.1.4.1.2272.1.21.5 | NotificationrcStpTopologyChange | current | A rcStpTopologyChange trap signifies that the SNMPv2 entity, acting in an agent role, has detected the Spanning Tree Protocol has gone due a topology change ev… | |
| 1.3.6.1.4.1.2272.1.21.6 | NotificationrcChasPowerSupplyDown | current | A rcChasPowerSupplyDown trap signifies that the SNMPv2 entity, acting in an agent role, has detected that the rcChasPowerSupplyOperStatus object for one of its… | |
| 1.3.6.1.4.1.2272.1.21.7 | NotificationrcChasFanDown | current | A rcChasFanDown trap signifies that the SNMPv2 entity, acting in an agent role, has detected that the rcChasFanOperStatus object for one of its power supply un… | |
| 1.3.6.1.4.1.2272.1.21.8 | NotificationrcLinkOscillation | current | A rcLinkOscillation trap signifies that the SNMPv2 entity, acting in an agent role, has detected an excessive number of link state transitions on the specified… | |
| 1.3.6.1.4.1.2272.1.21.9 | NotificationrcMacViolation | current | A rcMacViolation trap signifies that the SNMPv2 entity, acting in an agent role, has received a PDU with an invalid source MAC address. | |
| 1.3.6.1.4.1.2272.1.21.10 | NotificationrcSonetTrap | current | A rcSonetTrap trap signifies that the SNMPv2 entity, acting in an agent role, has detected a change of status on a Sonet port. | |
| 1.3.6.1.4.1.2272.1.21.11 | Notificationrc2kCardDown | obsolete | A rcCardDown trap signifies that the SNMPv2 entity, acting in an agent role, has detected that the rcCardOperStatus object for one of its cards is about to tra… | |
| 1.3.6.1.4.1.2272.1.21.12 | Notificationrc2kCardUp | obsolete | A rcCardUp trap signifies that the SNMPv2 entity, acting in an agent role, has detected that the rcCardOperStatus object for one of its cards is about to trans… | |
| 1.3.6.1.4.1.2272.1.21.13 | Notificationrc2kTemperature | current | A rc2kTemperature trap signifies that the SNMPv2 entity, acting in an agent role, has detected the chassis is over-heating. | |
| 1.3.6.1.4.1.2272.1.21.14 | NotificationrcChasPowerSupplyUp | current | A rcChasPowerSupplyUp trap signifies that the SNMPv2 entity, acting in an agent role, has detected that the rcChasPowerSupplyOperStatus object for one of its p… | |
| 1.3.6.1.4.1.2272.1.21.15 | Notificationrc2kAtmPvcLinkStateChange | current | A rc2kAtmPvcLinkStateChange trap signifies that the SNMPv2 entity, acting in an agent role, has detected that the rc2kAtmPvcOamVcStatus object for one of PVC i… | |
| 1.3.6.1.4.1.2272.1.21.16 | NotificationrcStpTCN | current | A rcStpTopologyChange trap signifies that the SNMPv2 entity, acting in an agent role, has detected the Spanning Tree Protocol has gone due a topology change ev… | |
| 1.3.6.1.4.1.2272.1.21.17 | NotificationrcSmltIstLinkUp | current | A rcSmltIstLinkUp trap signifies that the split MLT link is from down to up. | |
| 1.3.6.1.4.1.2272.1.21.18 | NotificationrcSmltIstLinkDown | current | A rcSmltIstLinkDown trap signifies that the split MLT link is from up to down. | |
| 1.3.6.1.4.1.2272.1.21.19 | NotificationrcSmltLinkUp | current | A rcMltSmltId trap signifies that the split SMLT link is up. | |
| 1.3.6.1.4.1.2272.1.21.20 | NotificationrcSmltLinkDown | current | A rcMltSmltId trap signifies that the split SMLT link is down. | |
| 1.3.6.1.4.1.2272.1.21.21 | NotificationrcChasFanUp | current | A rcChasFanUp trap signifies that the SNMPv2 entity, acting in an agent role, has detected that the rcChasFanOperStatus object for one of its power supply unit… | |
| 1.3.6.1.4.1.2272.1.21.22 | NotificationrcPasswordChange | current | A rcPasswordChange trap signifies that the SNMPv2 entity, acting in an agent role, has detected that the one of the cli password is changed. | |
| 1.3.6.1.4.1.2272.1.21.23 | NotificationrcEmError | current | A rcEmError trap signifies that the SNMPv2 entity, acting in an agent role, has detected Em error. | |
| 1.3.6.1.4.1.2272.1.21.25 | NotificationrcPcmciaCardRemoved | current | A rcPcmciaRemoved trap signifies that the SNMPv2 entity, acting in an agent role, has detected that the PCMCIA card is being removed. | |
| 1.3.6.1.4.1.2272.1.21.26 | NotificationrcSmartCpldTimerFired | current | A rcSmartCpldTimerFired trap signifies that the cpld timer fired. | |
| 1.3.6.1.4.1.2272.1.21.27 | NotificationrcCardCpldNotUpDate | current | A rcCardCpldNotUpDate trap signifies that the cpld is not up to date. | |
| 1.3.6.1.4.1.2272.1.21.28 | NotificationrcIgapLogFileFull | current | A rcIgapLogFileFull trap signifies that the Igap accounting time-out Log File reach the maximum. | |
| 1.3.6.1.4.1.2272.1.21.29 | NotificationrcCpLimitShutDown | current | A rcCpLimitShutDown trap signifies that the cp limit for the port is shutting down. | |
| 1.3.6.1.4.1.2272.1.21.30 | NotificationrcSshServerEnabled | current | A rcSshServerEnabled trap signifies that the SSH server is enabled. | |
| 1.3.6.1.4.1.2272.1.21.31 | NotificationrcSshServerDisabled | current | A rcSshServerDisabled trap signifies that the SSH server is disabled. | |
| 1.3.6.1.4.1.2272.1.21.32 | NotificationrcSshSessionLogin | current | A rcSshSessionLogin trap signifies that there is a SSH session login. | |
| 1.3.6.1.4.1.2272.1.21.33 | NotificationrcSshSessionLogout | current | A rcSshSessionLogout trap signifies that there is a SSH session logout. | |
| 1.3.6.1.4.1.2272.1.21.34 | NotificationrcSshUnauthorizedAccess | current | A rcSshUnauthorizedAccess trap signifies that an unauthorized access has occured. | |
| 1.3.6.1.4.1.2272.1.21.35 | NotificationrcHaCpuState | current | A rcHaCpuState trap signifies that the state of the HA-CPU. | |
| 1.3.6.1.4.1.2272.1.21.36 | NotificationrcInsufficientMemory | current | A rcInsufficientMemory trap indicates insufficient memory on CPU blade for proper operation. Recommended memory = 256 MB available through Nortel Networks upgr… | |
| 1.3.6.1.4.1.2272.1.21.37 | NotificationrcSaveConfigAction | current | A rcSaveConfigAction trap indicates the switch run time or boot configuration is being saved | |
| 1.3.6.1.4.1.2272.1.21.38 | NotificationrcLoopDetectOnPort | current | A rcSaveConfigAction trap indicates that a loop has been detected on a port. The vlan on that port will be disabled. | |
| 1.3.6.1.4.1.2272.1.21.39 | NotificationrcbgpEstablished | current | The BGP Established event is generated when the BGP FSM enters the ESTABLISHED state. | |
| 1.3.6.1.4.1.2272.1.21.40 | NotificationrcbgpBackwardTransition | current | The BGPBackwardTransition Event is generated when the BGP FSM moves from a higher numbered state to a lower numbered state. | |
| 1.3.6.1.4.1.2272.1.21.41 | NotificationrcAggLinkUp | current | A rcAggLinkUp trap is generated when the operational state of the aggregator changes from down to up. | |
| 1.3.6.1.4.1.2272.1.21.42 | NotificationrcAggLinkDown | current | A rcAggLinkDown trap is generated when the operational state of the aggregator changes from up to down. | |
| 1.3.6.1.4.1.2272.1.21.43 | NotificationrcIgmpNewGroupMember | current | An IgmpNewGroupMember trap signifies that a new member has come on an interface. | |
| 1.3.6.1.4.1.2272.1.21.44 | NotificationrcIgmpLossGroupMember | current | An IgmpLossGroupMember trap signifies that a group member has been lost on an interface. | |
| 1.3.6.1.4.1.2272.1.21.45 | NotificationrcIgmpNewQuerier | obsolete | An igmpNewQuerier trap signifies that a new querier has come up on an interface. | |
| 1.3.6.1.4.1.2272.1.21.46 | NotificationrcIgmpQuerierChange | obsolete | An rcIgmpQuerierChange trap signifies that the querier has changed. | |
| 1.3.6.1.4.1.2272.1.21.47 | NotificationrcDvmrpIfStateChange | current | A rcDvmrpIfStateChange trap signifies that there has been a change in the state of a DVMRP interface. | |
| 1.3.6.1.4.1.2272.1.21.48 | NotificationrcDvmrpNewNbrChange | current | A rcDvmrpNewNbrChange trap signifies that a new neighbor has come up on a DVMRP interface. | |
| 1.3.6.1.4.1.2272.1.21.49 | NotificationrcDvmrpNbrLossChange | current | A rcDvmrpNbrLossChange trap signifies that a new neighbor has gone down on a DVMRP interface. | |
| 1.3.6.1.4.1.2272.1.21.50 | NotificationrcPsePortOnOff | current | A rcPsePortOnOff trap signifies that if Pse Port is delivering or not power to the This Notification SHOULD be sent on every status change except in the search… | |
| 1.3.6.1.4.1.2272.1.21.51 | NotificationrcPsePortPowerMaintenanceStatus | current | A rcPsePortPowerMaintenanceStatus trap signifies that a Port change Status and it SHOULD be sent on every status change. | |
| 1.3.6.1.4.1.2272.1.21.52 | NotificationrcMainPseBackupActivate | current | A rcMainPseBackupActivate trap signifies that a Backup is Activated or BackUp is released on a Pse Port Group. | |
| 1.3.6.1.4.1.2272.1.21.53 | NotificationrcMainPowerUsageOn | current | A rcMainPowerUsageOn trap signifies that PSE Threshold Usage indication of a PSE Port Group is on, the usage power is above the threshold. | |
| 1.3.6.1.4.1.2272.1.21.54 | NotificationrcMainPowerUsageOff | current | A rcMainPowerUsageOn trap signifies that PSE Threshold Usage indication of a PSE Port Group is off, the usage power is above the threshold. | |
| 1.3.6.1.4.1.2272.1.21.55 | NotificationrcPseCardOnOff | current | A rcPoeMainPwrFailure trap signifies that the main power admin status is up. | |
| 1.3.6.1.4.1.2272.1.21.121 | NotificationrcIgmpNewQuerierOnIf | current | An igmpNewQuerier trap signifies that a new querier has come up on an interface. | |
| 1.3.6.1.4.1.2272.1.21.122 | NotificationrcIgmpQuerierChanged | current | An rcIgmpQuerierChange trap signifies that the querier has changed. | |
| 1.3.6.1.4.1.2272.1.21.123 | NotificationrcDuplexMismatch | current | A rcDuplexMismatch trap signifies that a LLDP Neighbor Port's Duplex/Speed mismatches with local port | |
| 1.3.6.1.4.1.2272.1.22 | NodercSyslog | |||
| 1.3.6.1.4.1.2272.1.22.1 | NodercSyslogGlobal | |||
| 1.3.6.1.4.1.2272.1.22.1.1 | ScalarrcSyslogGlobalEnable | read-write | current | Used to enable/disable the SysLog feature. When enabled this feature will send a message to a server on a network that this configured to receive and store dia… |
| 1.3.6.1.4.1.2272.1.22.1.2 | ScalarrcSyslogGlobalMaxHosts | read-write | current | Maximun number of remote hosts considered 'active' and able to receive messages from the Syslog service on the router. |
| 1.3.6.1.4.1.2272.1.22.1.3 | ScalarrcSyslogGlobalOperState | read-only | current | The operational state of the syslog service on the router. |
| 1.3.6.1.4.1.2272.1.22.1.4 | ScalarrcSyslogGlobalHeader | read-write | current | The IP Header Type for the Syslog Packet. |
| 1.3.6.1.4.1.2272.1.22.2 | TablercSyslogHostTbl | not-accessible | current | Table of remote host destinations for syslog. |
| 1.3.6.1.4.1.2272.1.22.2.1 | RowrcSyslogHostEntry | not-accessible | current | Entry containing information for a particular entry in rcSyslogHostTable. |
| 1.3.6.1.4.1.2272.1.22.2.1.1 | ColumnrcSyslogHostId | read-only | current | Host Id. |
| 1.3.6.1.4.1.2272.1.22.2.1.2 | ColumnrcSyslogHostIpAddr | read-write | deprecated | Host Ip Address |
| 1.3.6.1.4.1.2272.1.22.2.1.3 | ColumnrcSyslogHostUdpPort | read-write | current | Specifies the UDP port to use to send syslog messages to the host. |
| 1.3.6.1.4.1.2272.1.22.2.1.4 | ColumnrcSyslogHostFacility | read-write | current | Specifies the UNIX facility used in messages to the syslog host. Default is LOCAL7. |
| 1.3.6.1.4.1.2272.1.22.2.1.5 | ColumnrcSyslogHostModuleId | read-write | current | Specifies for which modules/tasks syslog messages should be sent. Default is all modules/tasks. |
| 1.3.6.1.4.1.2272.1.22.2.1.6 | ColumnrcSyslogHostModuleId2 | read-write | current | Specifies for which modules/tasks syslog messages should be sent. Default is all modules/tasks. |
| 1.3.6.1.4.1.2272.1.22.2.1.7 | ColumnrcSyslogHostSeverity | read-write | current | Specifies the severity level for which syslog messages should be sent for the modules specifies in 'SyslogHostModule'. Value is one of multiple (logical 'OR') … |
| 1.3.6.1.4.1.2272.1.22.2.1.8 | ColumnrcSyslogHostMapInfoSeverity | read-write | current | Specifies the syslog severity to use for Accelar INFO messages. Default is INFO. |
| 1.3.6.1.4.1.2272.1.22.2.1.9 | ColumnrcSyslogHostMapWarningSeverity | read-write | current | Specifies the syslog severity to use for Accelar WARNING messages. Default is WARNING. Should be <= INFO. |
| 1.3.6.1.4.1.2272.1.22.2.1.10 | ColumnrcSyslogHostMapErrorSeverity | read-write | current | Specifies the syslog severity to use for Accelar ERROR messages. Default is ERROR. Should be <= WARNING. |
| 1.3.6.1.4.1.2272.1.22.2.1.11 | ColumnrcSyslogHostMapMfgSeverity | read-write | current | Specifies the syslog severity to use for Accelar Manufactoring messages. Dafault is ERROR. |
| 1.3.6.1.4.1.2272.1.22.2.1.12 | ColumnrcSyslogHostMapFatalSeverity | read-write | current | Specifies the syslog severity to use for Accelar FATAL messages. Default is EMERGENCY. Should be <= ERROR. |
| 1.3.6.1.4.1.2272.1.22.2.1.13 | ColumnrcSyslogHostMapTraceMsg | read-write | current | Specifies the syslog severity to use for syslog trace messages. Default is DEBUG. |
| 1.3.6.1.4.1.2272.1.22.2.1.14 | ColumnrcSyslogHostMapTrapMsg | read-write | current | Specifies the UNIX severity code to use for syslog messages for SNMP traps sent to the syslog host. Default is INFO. |
| 1.3.6.1.4.1.2272.1.22.2.1.15 | ColumnrcSyslogHostLogTraceMsgs | read-write | current | Indicate whether to activate the host to log the syslog trace messages. |
| 1.3.6.1.4.1.2272.1.22.2.1.16 | ColumnrcSyslogHostLogTrapMsgs | read-write | current | Indicate whether to activate the host to log the syslog messages for SNMP traps. |
| 1.3.6.1.4.1.2272.1.22.2.1.17 | ColumnrcSyslogHostEnable | read-write | current | Enable/Disable messages to be sent to syslog host. |
| 1.3.6.1.4.1.2272.1.22.2.1.18 | ColumnrcSyslogHostRowStatus | read-write | current | Used to create/delete entries in the rcSyslogTable. |
| 1.3.6.1.4.1.2272.1.22.2.1.19 | ColumnrcSyslogHostAddressType | read-write | current | Address Type of the Host. |
| 1.3.6.1.4.1.2272.1.22.2.1.20 | ColumnrcSyslogHostAddress | read-write | current | Address of the Host. |
| 1.3.6.1.4.1.2272.1.22.2.1.21 | ColumnrcSyslogHostSecureForwardingEnable | read-write | current | Enable/Disable Secure forwarding of Syslog for a particular host. |
| 1.3.6.1.4.1.2272.1.22.2.1.22 | ColumnrcSyslogHostSecureForwardingSshProtect | read-write | current | Enable/Disable Secure forwarding of Syslog over SSH remote port forwarding for particular host. |
| 1.3.6.1.4.1.2272.1.22.2.1.23 | ColumnrcSyslogHostSecureForwardingTcpPort | read-write | current | Specifies the tcp port to use for Secure forwarding of for particular host. |
| 1.3.6.1.4.1.2272.1.22.2.1.24 | ColumnrcSyslogHostSecureForwardingMode | read-write | current | Enable/Disable Secure forwarding of Syslog over remote port forwarding for particular host.This object is used to obsolete the rcSyslogHostSecureForwardingEnab… |
| 1.3.6.1.4.1.2272.1.22.2.1.25 | ColumnrcSyslogHostSecureForwardingServerCertName | read-write | current | Specifies the identity name of server certificate. It is used to match the subject name of the server certificate received during negotiation with this configu… |
| 1.3.6.1.4.1.2272.1.22.3 | NodercLogMsgControl | |||
| 1.3.6.1.4.1.2272.1.22.3.1 | ScalarrcLogMsgControlAction | read-write | current | This value indicates the type of message control action |
| 1.3.6.1.4.1.2272.1.22.3.2 | ScalarrcLogMsgControlInterval | read-write | current | Indicates the message control interval value in minutes |
| 1.3.6.1.4.1.2272.1.22.3.3 | ScalarrcLogMsgControlMaxMsgNum | read-write | current | Used to specify the maximum frequency/count of the occurence of the Log Message. |
| 1.3.6.1.4.1.2272.1.22.3.4 | ScalarrcLogMsgControlEnable | read-write | current | Indicates the status of the system message control |
| 1.3.6.1.4.1.2272.1.22.4 | NodercLogLoggingGlobal | |||
| 1.3.6.1.4.1.2272.1.22.4.1 | ScalarrcLogLoggingEnable | read-only | current | Indicates the status of the logging operational status |
| 1.3.6.1.4.1.2272.1.22.4.2 | ScalarrcLogLoggingLevel | read-write | current | Use to set the logging msg level. 'info(1)' logs any message level 1 and above. 'warning(2)' logs any message level 2 and above. 'error(3)' logs any message le… |
| 1.3.6.1.4.1.2272.1.22.5 | TablercSyslogRootCertificateTable | not-accessible | current | Table containing file-name and actio to be performed on the serever root certificate |
| 1.3.6.1.4.1.2272.1.22.5.1 | RowrcSyslogRootCertificateEntry | not-accessible | current | Entry containing name of the server root certificate and the action to be performed on it |
| 1.3.6.1.4.1.2272.1.22.5.1.1 | ColumnrcSyslogRootCertificateFilename | not-accessible | current | Root certificate file of a Syslog Server to be installed or uninstalled. It requires object rcSyslogRootCertificate to be install or uninstall or none |
| 1.3.6.1.4.1.2272.1.22.5.1.2 | ColumnrcSyslogRootCertificateAction | read-create | current | To install/uninstall Root certificate file of a Syslog Server. It requires the object rcSyslogGlobalSecureForwadingCertFilename with a valid certification file… |
| 1.3.6.1.4.1.2272.1.22.5.1.3 | ColumnrcSyslogRootCertificateRowStatus | read-create | current | Used to create/delete entries in the rcSyslogRootCertificateTable. |
| 1.3.6.1.4.1.2272.1.23 | NodercDiag | |||
| 1.3.6.1.4.1.2272.1.23.1 | TablercDiagMirrorByPortTable | not-accessible | current | This table is used to configure the Mirror By Port feature. This feature allows the device to forward a copy of each packet seen on a particular port to a diff… |
| 1.3.6.1.4.1.2272.1.23.1.1 | RowrcDiagMirrorByPortEntry | not-accessible | current | Entry containing mirror by port information. |
| 1.3.6.1.4.1.2272.1.23.1.1.1 | ColumnrcDiagMirrorByPortId | read-only | current | Entry id. |
| 1.3.6.1.4.1.2272.1.23.1.1.2 | ColumnrcDiagMirrorByPortMirroredPort | read-write | deprecated | Used to configure the 'mirrored' port. The port where packets are copied from. |
| 1.3.6.1.4.1.2272.1.23.1.1.3 | ColumnrcDiagMirrorByPortMirroringPort | read-write | deprecated | Used to configure the 'mirroring' port. The port where packets are copied to. |
| 1.3.6.1.4.1.2272.1.23.1.1.4 | ColumnrcDiagMirrorByPortMode | read-write | current | Used to configure the 'mode' of the mirror operation. 'tx' means packets being transmitted on the 'mirrored' port will be copied. 'rx' means packets received o… |
| 1.3.6.1.4.1.2272.1.23.1.1.5 | ColumnrcDiagMirrorByPortEnable | read-write | current | Used to enable/disable this entry. |
| 1.3.6.1.4.1.2272.1.23.1.1.6 | ColumnrcDiagMirrorByPortRowStatus | read-write | current | Row status of this entry. |
| 1.3.6.1.4.1.2272.1.23.1.1.7 | ColumnrcDiagMirrorByPortOctapidId | read-only | obsolete | Octapid Id for a port. |
| 1.3.6.1.4.1.2272.1.23.1.1.8 | ColumnrcDiagMirrorByPortPid | read-only | current | Pid for a port. |
| 1.3.6.1.4.1.2272.1.23.1.1.9 | ColumnrcDiagMirrorRemoteMirrorVlanId | read-write | current | vlan-id to which mirrored packets needs to be send for remote mirroring. If set, this vlan id is used in mirror tag of the remote mirrored packet |
| 1.3.6.1.4.1.2272.1.23.1.1.10 | ColumnrcDiagMirrorByPortSpEncap | read-write | current | disable/enable service provide encapsulation. If this attribute is true the mirrored packets contains the service provider encapsulation, OEL2 and Mac-in-Mac e… |
| 1.3.6.1.4.1.2272.1.23.1.1.11 | ColumnrcDiagMirrorByPortGranularity | read-write | current | Used to configure the 'granularity' of the mirror operation physicalPort means all traffic ingressing or egressing out of the mirrored port shall be copied to … |
| 1.3.6.1.4.1.2272.1.23.1.1.12 | ColumnrcDiagMirrorByPortMirroredPortList | read-create | current | Used to configure the 'mirrored' port. The port where packets are copied from. |
| 1.3.6.1.4.1.2272.1.23.1.1.13 | ColumnrcDiagMirrorByPortMirroringPortList | read-create | current | Used to configure the 'mirroring' port. The port where packets are copied from. |
| 1.3.6.1.4.1.2272.1.23.1.1.14 | ColumnrcDiagMirrorMirroringVlanId | read-create | current | Destination is a VLAN. |
| 1.3.6.1.4.1.2272.1.23.1.1.15 | ColumnrcDiagMirrorMirroringMltId | read-create | current | Destination is an MLT. |
| 1.3.6.1.4.1.2272.1.23.1.1.16 | ColumnrcDiagMirrorMirroringMgId | read-only | current | Contains information about the MGID allocated. |
| 1.3.6.1.4.1.2272.1.23.1.1.17 | ColumnrcDiagMirrorMirroringIpAddr | read-write | current | Destination IP address. |
| 1.3.6.1.4.1.2272.1.23.1.1.18 | ColumnrcDiagMirrorMirroringIpTtl | read-write | current | Ttl value for the mirrored packet when mirror destination is IP. If other than default, the encapsulated packet will have the given ttl. |
| 1.3.6.1.4.1.2272.1.23.1.1.19 | ColumnrcDiagMirrorMirroringIpDscp | read-write | current | Dscp value for mirrored packets when mirror destination is IP. If other than default, the encapsulated packet will have the given Dscp value. |
| 1.3.6.1.4.1.2272.1.23.1.1.20 | ColumnrcDiagMirrorByPortScope | read-create | current | Used to configure the port mirroring scope. Chassis is the default option which allows mirroring among ports from different slots. Slice option requires both m… |
| 1.3.6.1.4.1.2272.1.23.1.1.21 | ColumnrcDiagMirrorMonitoringIsidOffset | read-create | current | Used to configure the monitoring ISID offset value. The offset id value is mapped to actual monitor I-SID value in which packets are mirrored to. |
| 1.3.6.1.4.1.2272.1.23.1.1.22 | ColumnrcDiagMirrorMonitoringIsid | read-only | current | Actual monitor I-SID value in which packets are mirrored to. |
| 1.3.6.1.4.1.2272.1.23.1.1.23 | ColumnrcDiagMirrorMirroringQos | read-create | current | Used to define the Quality of Service (QoS) profiles for the mirrored packet into monitoring ISID. |
| 1.3.6.1.4.1.2272.1.23.2 | TablercDiagPortConvSteeringTable | not-accessible | current | Diag Port Conv Steering Table |
| 1.3.6.1.4.1.2272.1.23.2.1 | RowrcDiagPortConvSteeringEntry | not-accessible | current | Entry containing information of Diag Port Conv Steering. |
| 1.3.6.1.4.1.2272.1.23.2.1.1 | ColumnrcDiagPortConvSteeringId | read-only | current | Entry id. |
| 1.3.6.1.4.1.2272.1.23.2.1.2 | ColumnrcDiagPortConvSteeringPortOne | read-write | current | IfIndex for port one |
| 1.3.6.1.4.1.2272.1.23.2.1.3 | ColumnrcDiagPortConvSteeringPortTwo | read-write | current | IfIndex for port two |
| 1.3.6.1.4.1.2272.1.23.2.1.4 | ColumnrcDiagPortConvSteeringMode | read-write | current | Used to specify the traffic flow that should be captured between ports one and two. |
| 1.3.6.1.4.1.2272.1.23.2.1.5 | ColumnrcDiagPortConvSteeringForwardPort | read-write | current | IfIndex of the port where captured traffic should be forwarded to. |
| 1.3.6.1.4.1.2272.1.23.2.1.6 | ColumnrcDiagPortConvSteeringEnable | read-write | current | Enable this entry. |
| 1.3.6.1.4.1.2272.1.23.2.1.7 | ColumnrcDiagPortConvSteeringRowStatus | read-write | current | Used to create/delete entries in the rcDiagMirrorByPortTable. |
| 1.3.6.1.4.1.2272.1.23.3 | TablercDiagMacConvSteeringTable | not-accessible | current | Diag Mac Conv Steering Table |
| 1.3.6.1.4.1.2272.1.23.3.1 | RowrcDiagMacConvSteeringEntry | not-accessible | current | Entry containing information of Diag Mac Conv Steering. |
| 1.3.6.1.4.1.2272.1.23.3.1.1 | ColumnrcDiagMacConvSteeringId | read-only | current | Entry id. |
| 1.3.6.1.4.1.2272.1.23.3.1.2 | ColumnrcDiagMacConvSteeringSrcMac | read-write | current | Source MAC address |
| 1.3.6.1.4.1.2272.1.23.3.1.3 | ColumnrcDiagMacConvSteeringDstMac | read-write | current | Destination MAC address |
| 1.3.6.1.4.1.2272.1.23.3.1.4 | ColumnrcDiagMacConvSteeringInPort | read-write | current | IfIndex of ingress port. |
| 1.3.6.1.4.1.2272.1.23.3.1.5 | ColumnrcDiagMacConvSteeringForwardPort | read-write | current | IfIndex of the port where captured traffic should be forwarded to. |
| 1.3.6.1.4.1.2272.1.23.3.1.6 | ColumnrcDiagMacConvSteeringEnable | read-write | current | Enable this entry. |
| 1.3.6.1.4.1.2272.1.23.3.1.7 | ColumnrcDiagMacConvSteeringRowStatus | read-write | current | Used to create/delete entries in the rcDiagMirrorByPortTable. |
| 1.3.6.1.4.1.2272.1.23.4 | TablercDiagVctTable | not-accessible | current | Diag Vct Table |
| 1.3.6.1.4.1.2272.1.23.4.1 | RowrcDiagVctEntry | not-accessible | current | Entry containing cable infomation and test result. |
| 1.3.6.1.4.1.2272.1.23.4.1.1 | ColumnrcDiagVctIfIndex | read-only | current | Port IfIndex. |
| 1.3.6.1.4.1.2272.1.23.4.1.2 | ColumnrcDiagVctNormalCableLength | read-only | current | Cable length, this indicates a range in which the actual length falls. |
| 1.3.6.1.4.1.2272.1.23.4.1.3 | ColumnrcDiagVctPhyType | read-only | current | Phy type, 100MHz throught 1 GHz, or broadcom phy. |
| 1.3.6.1.4.1.2272.1.23.4.1.4 | ColumnrcDiagVctCableStatus | read-only | current | Status of the cable as a whole. The status of a cable is in a sense, a summation of the status of its pairs. If all the pairs are normal, then the cable is nor… |
| 1.3.6.1.4.1.2272.1.23.4.1.5 | ColumnrcDiagVctPair1Status | read-only | current | The status of a single pair in the cable |
| 1.3.6.1.4.1.2272.1.23.4.1.6 | ColumnrcDiagVctPair1ErrLength | read-only | current | Error Pair Length, in meters, measured by Time Domain Reflectometry. |
| 1.3.6.1.4.1.2272.1.23.4.1.7 | ColumnrcDiagVctPair2Status | read-only | current | The status of a single pair in the cable |
| 1.3.6.1.4.1.2272.1.23.4.1.8 | ColumnrcDiagVctPair2ErrLength | read-only | current | Error Pair Length, in meters, measured by Time Domain Reflectometry. |
| 1.3.6.1.4.1.2272.1.23.4.1.9 | ColumnrcDiagVctPair3Status | read-only | current | The status of a single pair in the cable |
| 1.3.6.1.4.1.2272.1.23.4.1.10 | ColumnrcDiagVctPair3ErrLength | read-only | current | Error Pair Length, in meters, measured by Time Domain Reflectometry. |
| 1.3.6.1.4.1.2272.1.23.4.1.11 | ColumnrcDiagVctPair4Status | read-only | current | The status of a single pair in the cable |
| 1.3.6.1.4.1.2272.1.23.4.1.12 | ColumnrcDiagVctPair4ErrLength | read-only | current | Error Pair Length, in meters, measured by Time Domain Reflectometry. |
| 1.3.6.1.4.1.2272.1.23.4.1.13 | ColumnrcDiagVctStartTest | read-write | current | Start VCT test, Set this object to TRUE to perform a VCT test on the current port. A get on this object produces an undefines value. |
| 1.3.6.1.4.1.2272.1.23.4.1.14 | ColumnrcDiagVctTestDone | read-only | current | When a VCT test is started setting rcDiagVctStartTest, this object is immediately set to FALSE by the switch software. It remain FALSE until the test is comple… |
| 1.3.6.1.4.1.2272.1.23.4.1.15 | ColumnrcDiagVctCableCategory | read-only | current | Cable type: CAT3 or CAT5. |
| 1.3.6.1.4.1.2272.1.23.4.1.16 | ColumnrcDiagVctCableLength | read-only | current | Length of cable in meters based on average electrical length of 4 pairs. Measurement can be done when traffic is live or not. |
| 1.3.6.1.4.1.2272.1.23.4.1.17 | ColumnrcDiagVctPair1Polarity | read-only | current | The polarity of a single pair in the cable. |
| 1.3.6.1.4.1.2272.1.23.4.1.18 | ColumnrcDiagVctPair1Swap | read-only | current | The pair swap in the cable. |
| 1.3.6.1.4.1.2272.1.23.4.1.19 | ColumnrcDiagVctPair1Skew | read-only | current | Differential cable pair length in meters. Skew measurement can only be performed when cable gigabit link is up regardless of traffic activity. A value of -1 me… |
| 1.3.6.1.4.1.2272.1.23.4.1.20 | ColumnrcDiagVctPair2Polarity | read-only | current | The polarity of a single pair in the cable. |
| 1.3.6.1.4.1.2272.1.23.4.1.21 | ColumnrcDiagVctPair2Swap | read-only | current | The pair swap in the cable. |
| 1.3.6.1.4.1.2272.1.23.4.1.22 | ColumnrcDiagVctPair2Skew | read-only | current | Differential cable pair length in meters. Skew measurement can only be performed when cable gigabit link is up regardless of traffic activity. A value of -1 me… |
| 1.3.6.1.4.1.2272.1.23.4.1.23 | ColumnrcDiagVctPair3Polarity | read-only | current | The polarity of a single pair in the cable. |
| 1.3.6.1.4.1.2272.1.23.4.1.24 | ColumnrcDiagVctPair3Swap | read-only | current | The pair swap in the cable. |
| 1.3.6.1.4.1.2272.1.23.4.1.25 | ColumnrcDiagVctPair3Skew | read-only | current | Differential cable pair length in meters. Skew measurement can only be performed when cable gigabit link is up regardless of traffic activity. A value of -1 me… |
| 1.3.6.1.4.1.2272.1.23.4.1.26 | ColumnrcDiagVctPair4Polarity | read-only | current | The polarity of a single pair in the cable. |
| 1.3.6.1.4.1.2272.1.23.4.1.27 | ColumnrcDiagVctPair4Swap | read-only | current | The pair swap in the cable. |
| 1.3.6.1.4.1.2272.1.23.4.1.28 | ColumnrcDiagVctPair4Skew | read-only | current | Differential cable pair length in meters. Skew measurement can only be performed when cable gigabit link is up regardless of traffic activity. A value of -1 me… |
| 1.3.6.1.4.1.2272.1.23.10 | ScalarrcDiagSaveConfig | read-write | obsolete | Used to configure whether the various mirror feature settings should be saved and restored across system reboot. |
| 1.3.6.1.4.1.2272.1.23.11 | ScalarrcDiagMirrorByPortTblSize | read-only | current | Used to indicate table size. |
| 1.3.6.1.4.1.2272.1.23.12 | ScalarrcDiagPortConvSteeringTblSize | read-only | current | Used to indicate table size. |
| 1.3.6.1.4.1.2272.1.23.13 | ScalarrcDiagMacConvSteeringTblSize | read-only | current | Used to indicate table size. |
| 1.3.6.1.4.1.2272.1.23.14 | ScalarrcDiagDiagnosticsEnable | read-write | obsolete | Used to enable/disable the mirroring feature for the entire device. This setting overrides any setting in the various mirroring tables. |
| 1.3.6.1.4.1.2272.1.23.15 | NodercDiagPcap | |||
| 1.3.6.1.4.1.2272.1.23.15.1 | ScalarrcDiagPcapEnable | read-write | current | To enable pcap in secondary CPU |
| 1.3.6.1.4.1.2272.1.23.15.2 | ScalarrcDiagPcapBufferWrap | read-write | current | To enable buffer wrap-around when buffer is full. If set, pcap will continue to capture pkts, otherwise stops pkt storing |
| 1.3.6.1.4.1.2272.1.23.15.3 | ScalarrcDiagPcapPcmciaWrap | read-write | current | To wrap around the PCMCIA when saving data in PCMCIA. In Vsp,the name has been changed to wrap-auto-save-file. When this parameter is true it overwrites the fi… |
| 1.3.6.1.4.1.2272.1.23.15.4 | ScalarrcDiagPcapFrameSize | read-write | current | Number of bytes of pkts needs to be stored |
| 1.3.6.1.4.1.2272.1.23.15.5 | ScalarrcDiagPcapBufferSize | read-write | current | memory to be allocated for capturing the pkt |
| 1.3.6.1.4.1.2272.1.23.15.6 | ScalarrcDiagPcapAutoSave | read-write | current | To save data automatically when buffer is full |
| 1.3.6.1.4.1.2272.1.23.15.7 | ScalarrcDiagPcapAutoSaveFileName | read-write | current | Name of the file in which the pkt is to be stored |
| 1.3.6.1.4.1.2272.1.23.15.8 | ScalarrcDiagPcapAutoSaveDevice | read-write | current | Where to store the captured pkts. If the option is network, the user need to enter an IP address also |
| 1.3.6.1.4.1.2272.1.23.15.9 | ScalarrcDiagPcapAutoSaveNetworkIpAddress | read-write | current | ip address of the remote host where the data needs to be stored. This field is valid only if the device is network |
| 1.3.6.1.4.1.2272.1.23.15.10 | ScalarrcDiagPcapFilterTableSize | read-only | current | Used to indicate the number of entries in the Filter table |
| 1.3.6.1.4.1.2272.1.23.15.11 | TablercDiagPcapFilterTable | not-accessible | current | A table used to store pcap secondary filters |
| 1.3.6.1.4.1.2272.1.23.15.11.1 | RowrcDiagPcapFilterEntry | not-accessible | current | Pcap secondary filter desc |
| 1.3.6.1.4.1.2272.1.23.15.11.1.1 | ColumnrcDiagPcapFilterId | read-only | current | Unique ID that represents the filter |
| 1.3.6.1.4.1.2272.1.23.15.11.1.2 | ColumnrcDiagPcapFilterEnable | read-write | current | Filter is enabled or not |
| 1.3.6.1.4.1.2272.1.23.15.11.1.3 | ColumnrcDiagPcapFilterAction | read-write | current | Action to be takesn when policy is matched |
| 1.3.6.1.4.1.2272.1.23.15.11.1.4 | ColumnrcDiagPcapFilterSrcMac | read-write | current | Soruce mac address to match |
| 1.3.6.1.4.1.2272.1.23.15.11.1.5 | ColumnrcDiagPcapFilterSrcMask | read-write | current | Soruce mac address mask. Used to specify a range |
| 1.3.6.1.4.1.2272.1.23.15.11.1.6 | ColumnrcDiagPcapFilterIsInverseSrcMac | read-write | current | Soruce mac address Inverse. when set the mac addresses otherthan specified is matched |
| 1.3.6.1.4.1.2272.1.23.15.11.1.7 | ColumnrcDiagPcapFilterDstMac | read-write | current | Destination mac address |
| 1.3.6.1.4.1.2272.1.23.15.11.1.8 | ColumnrcDiagPcapFilterDstMask | read-write | current | Destination mac address mask. Used to specify a range |
| 1.3.6.1.4.1.2272.1.23.15.11.1.9 | ColumnrcDiagPcapFilterIsInverseDstMac | read-write | current | Destination mac address Inverse. when set the mac addresses otherthan specified is matched |
| 1.3.6.1.4.1.2272.1.23.15.11.1.10 | ColumnrcDiagPcapFilterVlanId | read-write | current | Vlan-id of the packet to be matched |
| 1.3.6.1.4.1.2272.1.23.15.11.1.11 | ColumnrcDiagPcapFilterToVlanId | read-write | current | To Vlan-id. Used to specify a range |
| 1.3.6.1.4.1.2272.1.23.15.11.1.12 | ColumnrcDiagPcapFilterIsInverseVlanId | read-write | current | Vlan-Id Inverse. when set the Vlan-Id otherthan specified range is matched |
| 1.3.6.1.4.1.2272.1.23.15.11.1.13 | ColumnrcDiagPcapFilterPbit | read-write | current | pBit of the packet to be matched |
| 1.3.6.1.4.1.2272.1.23.15.11.1.14 | ColumnrcDiagPcapFilterToPbit | read-write | current | To pBit. Used to specify a range |
| 1.3.6.1.4.1.2272.1.23.15.11.1.15 | ColumnrcDiagPcapFilterIsInversePbit | read-write | current | pBit Inverse. when set the pBit otherthan specified range is matched |
| 1.3.6.1.4.1.2272.1.23.15.11.1.16 | ColumnrcDiagPcapFilterEtherType | read-write | current | EtherType of the packet to be matched |
| 1.3.6.1.4.1.2272.1.23.15.11.1.17 | ColumnrcDiagPcapFilterToEtherType | read-write | current | To EtherType. Used to specify a range |
| 1.3.6.1.4.1.2272.1.23.15.11.1.18 | ColumnrcDiagPcapFilterIsInverseEtherType | read-write | current | EtherType Inverse. when set the EtherType otherthan specified range is matched |
| 1.3.6.1.4.1.2272.1.23.15.11.1.19 | ColumnrcDiagPcapFilterProtocolType | read-write | current | ProtocolType of the packet to be matched |
| 1.3.6.1.4.1.2272.1.23.15.11.1.20 | ColumnrcDiagPcapFilterToProtocolType | read-write | current | To ProtocolType. Used to specify a range |
| 1.3.6.1.4.1.2272.1.23.15.11.1.21 | ColumnrcDiagPcapFilterIsInverseProtocolType | read-write | current | ProtocolType Inverse. when set the ProtocolType otherthan specified range is matched |
| 1.3.6.1.4.1.2272.1.23.15.11.1.22 | ColumnrcDiagPcapFilterSrcIp | read-write | current | Source IP address of the packet to be matched |
| 1.3.6.1.4.1.2272.1.23.15.11.1.23 | ColumnrcDiagPcapFilterToSrcIp | read-write | current | To Source IP address. Used to specify a range |
| 1.3.6.1.4.1.2272.1.23.15.11.1.24 | ColumnrcDiagPcapFilterIsInverseSrcIp | read-write | current | Source IP address Inverse. when set the source IP otherthan specified range is matched |
| 1.3.6.1.4.1.2272.1.23.15.11.1.25 | ColumnrcDiagPcapFilterDstIp | read-write | current | Destination IP address of the packet to be matched |
| 1.3.6.1.4.1.2272.1.23.15.11.1.26 | ColumnrcDiagPcapFilterToDstIp | read-write | current | To Destination IP address. Used to specify a range |
| 1.3.6.1.4.1.2272.1.23.15.11.1.27 | ColumnrcDiagPcapFilterIsInverseDstIp | read-write | current | Destination IP address Inverse. when set the Destination IP otherthan specified is range matched |
| 1.3.6.1.4.1.2272.1.23.15.11.1.28 | ColumnrcDiagPcapFilterDscp | read-write | current | DSCP value of the packet to be matched |
| 1.3.6.1.4.1.2272.1.23.15.11.1.29 | ColumnrcDiagPcapFilterToDscp | read-write | current | To DSCP. Used to specify a range |
| 1.3.6.1.4.1.2272.1.23.15.11.1.30 | ColumnrcDiagPcapFilterIsInverseDscp | read-write | current | DSCP Inverse. when set the DSCP otherthan specified range is matched |
| 1.3.6.1.4.1.2272.1.23.15.11.1.31 | ColumnrcDiagPcapFilterRowStatus | read-write | current | Row Status |
| 1.3.6.1.4.1.2272.1.23.15.11.1.32 | ColumnrcDiagPcapFilterDscpMatchZero | read-write | current | When this value is set to true, then 0 value of Pbit is not taken as disable value. The user will be allowed to capture packets with Pbit value of 0 also. Be d… |
| 1.3.6.1.4.1.2272.1.23.15.11.1.33 | ColumnrcDiagPcapFilterPbitMatchZero | read-write | current | When this value is set to true, then 0 value of Pbit is not taken as disable value. The user will be allowed to capture packets with Pbit value of 0 also. Be d… |
| 1.3.6.1.4.1.2272.1.23.15.12 | ScalarrcDiagPcapAdvancedFilterTableSize | read-only | current | Used to indicate the number of entries in the Filter table advanced parameter |
| 1.3.6.1.4.1.2272.1.23.15.13 | TablercDiagPcapAdvancedFilterTable | not-accessible | current | A table used to store pcap secondary filters |
| 1.3.6.1.4.1.2272.1.23.15.13.1 | RowrcDiagPcapAdvancedFilterEntry | not-accessible | current | Pcap secondary Advanced filter desc |
| 1.3.6.1.4.1.2272.1.23.15.13.1.1 | ColumnrcDiagPcapAdvancedFilterId | read-only | current | Unique ID that represents the filter |
| 1.3.6.1.4.1.2272.1.23.15.13.1.2 | ColumnrcDiagPcapAdvancedFilterUdpPort | read-write | current | UdpPort of the packet to be matched |
| 1.3.6.1.4.1.2272.1.23.15.13.1.3 | ColumnrcDiagPcapAdvancedFilterToUdpPort | read-write | current | To UdpPort. Used to specify a range |
| 1.3.6.1.4.1.2272.1.23.15.13.1.4 | ColumnrcDiagPcapAdvancedFilterIsInverseUdpPort | read-write | current | UdpPort Inverse. when set the UdpPort otherthan specified range is matched |
| 1.3.6.1.4.1.2272.1.23.15.13.1.5 | ColumnrcDiagPcapAdvancedFilterTcpPort | read-write | current | TcpPort of the packet to be matched |
| 1.3.6.1.4.1.2272.1.23.15.13.1.6 | ColumnrcDiagPcapAdvancedFilterToTcpPort | read-write | current | To TcpPort. Used to specify a range |
| 1.3.6.1.4.1.2272.1.23.15.13.1.7 | ColumnrcDiagPcapAdvancedFilterIsInverseTcpPort | read-write | current | TcpPort Inverse. when set the TcpPort otherthan specified range is matched |
| 1.3.6.1.4.1.2272.1.23.15.13.1.8 | ColumnrcDiagPcapAdvancedFilterUserDefinedData | read-write | current | User defined data to match with the packets received |
| 1.3.6.1.4.1.2272.1.23.15.13.1.9 | ColumnrcDiagPcapAdvancedFilterUserDefinedDataSize | read-write | current | Length of user defined data |
| 1.3.6.1.4.1.2272.1.23.15.13.1.10 | ColumnrcDiagPcapAdvancedFilterUserDefinedOffset | read-write | current | Offset from which match has to start |
| 1.3.6.1.4.1.2272.1.23.15.13.1.11 | ColumnrcDiagPcapAdvancedFilterIsInverseUserDefined | read-write | current | TcpPort Inverse. when set the Userdata otherthan specified is matched |
| 1.3.6.1.4.1.2272.1.23.15.13.1.12 | ColumnrcDiagPcapAdvancedFilterTimer | read-write | current | Timer to start the pcap capture window in ms |
| 1.3.6.1.4.1.2272.1.23.15.13.1.13 | ColumnrcDiagPcapAdvancedFilterPacketCount | read-write | current | Number of packets to be captured before disabling pcap |
| 1.3.6.1.4.1.2272.1.23.15.13.1.14 | ColumnrcDiagPcapAdvancedFilterRefreshTimer | read-write | current | Refresh timer in ms |
| 1.3.6.1.4.1.2272.1.23.15.13.1.15 | ColumnrcDiagPcapAdvancedFilterRowStatus | read-write | current | RowStatus |
| 1.3.6.1.4.1.2272.1.23.15.14 | ScalarrcDiagPcapCopyFileName | read-write | current | Used to indicate the file name. When set, the PCAP data from PCAP engine RAM is stored into this file in PCAP engine |
| 1.3.6.1.4.1.2272.1.23.15.15 | ScalarrcDiagPcapResetStat | read-write | current | To Reset PCAP statistics |
| 1.3.6.1.4.1.2272.1.23.15.16 | ScalarrcDiagPcapStatPacketCapacityCount | read-only | current | Packet Capacity Count |
| 1.3.6.1.4.1.2272.1.23.15.17 | ScalarrcDiagPcapStatNumberOfPacketsReceived | read-only | current | Number of packets received in PCAP engine |
| 1.3.6.1.4.1.2272.1.23.15.18 | ScalarrcDiagPcapStatNumberOfPacketsAccumulated | read-only | current | Number of packets captured in PCAP engine |
| 1.3.6.1.4.1.2272.1.23.15.19 | ScalarrcDiagPcapStatNumberOfPacketsDroppedInPcapEngine | read-only | current | Number of packets dropped in PCAP engine by filters |
| 1.3.6.1.4.1.2272.1.23.15.20 | ScalarrcDiagPcapStatNumberOfPacketsDroppedInHardware | read-only | current | Number of packets dropped in Hardware |
| 1.3.6.1.4.1.2272.1.23.15.21 | ScalarrcDiagPcapDataValid | read-only | current | A true/false value that indicate the return data whether is valid. |
| 1.3.6.1.4.1.2272.1.23.15.22 | ScalarrcDiagPcapEtherTypeForSvlanLevel | read-write | current | EtherType of svlan level. |
| 1.3.6.1.4.1.2272.1.23.16 | ScalarrcDiagLockupDiagnosticEnable | read-write | current | Used as a flag to enable/disable the lockup diagnostic feature for the R-Modules |
| 1.3.6.1.4.1.2272.1.23.17 | ScalarrcDiagLockupActionEnable | read-write | current | Used as a flag to determine if action is to be taken when lockup is detected for r-modules |
| 1.3.6.1.4.1.2272.1.23.18 | TablercDiagMonitorByIsidTable | not-accessible | current | This table is used to configure the Monitor By Isid feature. This feature allows the device to analyze the packets which got mirrored into isid. |
| 1.3.6.1.4.1.2272.1.23.18.1 | RowrcDiagMonitorByIsidEntry | not-accessible | current | Entry containing monitor by isid information. |
| 1.3.6.1.4.1.2272.1.23.18.1.1 | ColumnrcDiagMonitorByIsidIndex | not-accessible | current | Entry id. |
| 1.3.6.1.4.1.2272.1.23.18.1.2 | ColumnrcDiagMonitorByIsidMonitorIsidOffset | read-create | current | Used to configure the monitoring ISID offset value. The offset id value is mapped to actual monitor I-SID value in which packets are mirrored to. |
| 1.3.6.1.4.1.2272.1.23.18.1.3 | ColumnrcDiagMonitorByIsidMonitorIsid | read-only | current | Actual monitor I-SID value in which packets are mirrored to. |
| 1.3.6.1.4.1.2272.1.23.18.1.4 | ColumnrcDiagMonitorByIsidEgressPortList | read-create | current | Egress ports to which traffic analyzers are connected. |
| 1.3.6.1.4.1.2272.1.23.18.1.5 | ColumnrcDiagMonitorByIsidEgressMltId | read-create | current | Egress MLT id to which traffic analyzers are connected. |
| 1.3.6.1.4.1.2272.1.23.18.1.6 | ColumnrcDiagMonitorByIsidMapToVlanId | read-create | current | VLAN id to map with mirrored traffic on the monitoring node. |
| 1.3.6.1.4.1.2272.1.23.18.1.7 | ColumnrcDiagMonitorByIsidNickname | read-create | current | Nickname of the BEB from which user wants to analyze the traffic. |
| 1.3.6.1.4.1.2272.1.23.18.1.8 | ColumnrcDiagMonitorByIsidEnable | read-create | current | Used to enable/disable this entry. |
| 1.3.6.1.4.1.2272.1.23.18.1.9 | ColumnrcDiagMonitorByIsidRowStatus | read-create | current | Row status of this entry. |
| 1.3.6.1.4.1.2272.1.23.19 | TablercDiagIsidMirroringStatsTable | not-accessible | current | This table is used to show/clear number of packets which got mirrored into isid. |
| 1.3.6.1.4.1.2272.1.23.19.1 | RowrcDiagIsidMirroringStatsEntry | not-accessible | current | Entry containing isid mirroring stats information. |
| 1.3.6.1.4.1.2272.1.23.19.1.1 | ColumnrcDiagIsidMirroringStatsIndex | not-accessible | current | Offset id value which is mapped to actual monitor I-SID value. |
| 1.3.6.1.4.1.2272.1.23.19.1.2 | ColumnrcDiagIsidMirroringStatsMonitorIsid | read-only | current | Actual monitor I-SID value in which packets are mirrored to. |
| 1.3.6.1.4.1.2272.1.23.19.1.3 | ColumnrcDiagIsidMirroringStatsMirroredPackets | read-only | current | Number of packets mirrored into ISID on the mirroring BEB. |
| 1.3.6.1.4.1.2272.1.23.19.1.4 | ColumnrcDiagIsidMirroringStatsClearStats | read-write | current | Used to clear the ISID mirroring statistics. |
| 1.3.6.1.4.1.2272.1.24 | NodercIpx | |||
| 1.3.6.1.4.1.2272.1.24.1 | ScalarrcIpxRoutingEnable | read-write | current | Global Ipx Routing control variable |
| 1.3.6.1.4.1.2272.1.24.2 | TablercIpxAddrTable | not-accessible | current | The table of addressing information relevant to this entity's IPX addresses. This table is used for associating IfIndex and IPX network number. |
| 1.3.6.1.4.1.2272.1.24.2.1 | RowrcIpxAddrEntry | not-accessible | current | The addressing information for one of this entity's IP addresses. |
| 1.3.6.1.4.1.2272.1.24.2.1.1 | ColumnrcIpxAddrVlanId | read-write | current | The index value which uniquely identifies the interface to which this entry is applicable. The interface identified by a particular value of this index is the … |
| 1.3.6.1.4.1.2272.1.24.2.1.2 | ColumnrcIpxAddrNetAddr | read-write | current | IPX Network address. |
| 1.3.6.1.4.1.2272.1.24.2.1.3 | ColumnrcIpxAddrEncap | read-write | current | Specify IPX encapsulation format. It is relevent if the VLAN is port based. But it's always nice to have it. |
| 1.3.6.1.4.1.2272.1.24.2.1.4 | ColumnrcIpxAddrEntryStatus | read-write | current | Used to create/delete entries in the rcIpxAddrEntry. |
| 1.3.6.1.4.1.2272.1.24.2.1.5 | ColumnrcIpxAddrTicks | read-write | current | The tick value gets updated to the routing table when an ipx address is being assigned to a vlan. |
| 1.3.6.1.4.1.2272.1.24.3 | ScalarrcIpxPolicyNetTableSize | read-only | current | Used to indicate the number of entries in the table. |
| 1.3.6.1.4.1.2272.1.24.4 | TablercIpxPolicyNetTable | not-accessible | current | Net Table is used to store the IPX network address range. This entry is used for Net List Table. |
| 1.3.6.1.4.1.2272.1.24.4.1 | RowrcIpxPolicyNetEntry | not-accessible | current | table entry. |
| 1.3.6.1.4.1.2272.1.24.4.1.1 | ColumnrcIpxPolicyNetId | read-write | current | Unique ID to represent the entry in the table. |
| 1.3.6.1.4.1.2272.1.24.4.1.2 | ColumnrcIpxPolicyNetFromNet | read-write | current | IPX Network Address. |
| 1.3.6.1.4.1.2272.1.24.4.1.3 | ColumnrcIpxPolicyNetToNet | read-write | current | This is used to specify a range of IPX network addresses. This is an optional parameter. The default value is NetAddr. In that case the entry refers to a singl… |
| 1.3.6.1.4.1.2272.1.24.4.1.4 | ColumnrcIpxPolicyNetName | read-write | current | Unique Name to represent the entry in the table. Id & Name have one-to-one relationship. |
| 1.3.6.1.4.1.2272.1.24.4.1.5 | ColumnrcIpxPolicyNetRowStatus | read-write | current | . |
| 1.3.6.1.4.1.2272.1.24.5 | ScalarrcIpxPolicyServTableSize | read-only | current | Used to indicate the number of entries in the table. |
| 1.3.6.1.4.1.2272.1.24.6 | TablercIpxPolicyServTable | not-accessible | current | Service Table is used to store Service Type and Service Name. This is used only for SAP Updates. |
| 1.3.6.1.4.1.2272.1.24.6.1 | RowrcIpxPolicyServEntry | not-accessible | current | table entry. |
| 1.3.6.1.4.1.2272.1.24.6.1.1 | ColumnrcIpxPolicyServId | read-only | current | Used to store the service Id. |
| 1.3.6.1.4.1.2272.1.24.6.1.2 | ColumnrcIpxPolicyServServiceType | read-only | current | Used to store the service type. |
| 1.3.6.1.4.1.2272.1.24.6.1.3 | ColumnrcIpxPolicyServServiceName | read-only | current | Used to store the service Name. This is an optional parameter. If not entered, '*' is taken as default value. This is matched to any service name. Also, '*' ca… |
| 1.3.6.1.4.1.2272.1.24.6.1.4 | ColumnrcIpxPolicyServName | read-write | current | Used to store the entry name. Id & Name have one-to-one relationship. |
| 1.3.6.1.4.1.2272.1.24.6.1.5 | ColumnrcIpxPolicyServRowStatus | read-write | current | . |
| 1.3.6.1.4.1.2272.1.24.7 | ScalarrcIpxPolicyListTableSize | read-only | current | Used to indicate the number of entries in the table. |
| 1.3.6.1.4.1.2272.1.24.8 | TablercIpxPolicyListTable | not-accessible | current | PolicyList Table is used to store generic policies that can be used by both RIP and SAP as their in/out policies. |
| 1.3.6.1.4.1.2272.1.24.8.1 | RowrcIpxPolicyListEntry | not-accessible | current | table entry. |
| 1.3.6.1.4.1.2272.1.24.8.1.1 | ColumnrcIpxPolicyListId | read-only | current | Index used to uniquely Identify a group of policies in the route policy table. |
| 1.3.6.1.4.1.2272.1.24.8.1.2 | ColumnrcIpxPolicyListSeqnum | read-only | current | Second Index used to identify a specific policy with in the route policy group (grouped by Id). This field allows users to specify different MATCH, SET paramet… |
| 1.3.6.1.4.1.2272.1.24.8.1.3 | ColumnrcIpxPolicyListName | read-write | current | Is used to group a set of policies with different sequence number. Id & Name have one-to-one relationship Different policy groups can have same sequence number… |
| 1.3.6.1.4.1.2272.1.24.8.1.4 | ColumnrcIpxPolicyListEnable | read-write | current | value specified here indicates whether the policy is enabled or not. If disabled, the policy should not be used. |
| 1.3.6.1.4.1.2272.1.24.8.1.5 | ColumnrcIpxPolicyListAction | read-write | current | This determines what to do with the RIP/SAP packet. If the value is 'permit', then only in or out the packet. Otherwise, drop the packet. |
| 1.3.6.1.4.1.2272.1.24.8.1.6 | ColumnrcIpxPolicyListRouteSource | read-write | current | Used to specify the Route Source of the route Packet. This field is used only for announce policies. For accept policies, this field is ignored. Value is one o… |
| 1.3.6.1.4.1.2272.1.24.8.1.7 | ColumnrcIpxPolicyListMatchNetList | read-write | current | List of networks to which this policy is applied. The Network List Name is entered. When this is not referring to any list or the Net List Table to which it is… |
| 1.3.6.1.4.1.2272.1.24.8.1.8 | ColumnrcIpxPolicyListMatchServList | read-write | current | List of service types and Service Names to which this policy is applied. The Service List name is entered. This field is used only for SAP out/in policies. For… |
| 1.3.6.1.4.1.2272.1.24.8.1.9 | ColumnrcIpxPolicyListHops | read-write | current | This value is used as Hop count for out policies. If this field is 0, then Hop count is not modified. The default value is '0'. This field is also applicable o… |
| 1.3.6.1.4.1.2272.1.24.8.1.10 | ColumnrcIpxPolicyListTicks | read-write | current | The tick value which will be updated for RIP when the routing method is tick. |
| 1.3.6.1.4.1.2272.1.24.8.1.11 | ColumnrcIpxPolicyListRowStatus | read-write | current | . |
| 1.3.6.1.4.1.2272.1.24.9 | ScalarrcIpxRipOutFilterTableSize | read-only | current | Used to indicate the number of entries in the table. |
| 1.3.6.1.4.1.2272.1.24.10 | TablercIpxRipOutFilterTable | not-accessible | current | RipOutFilter Table is used to store generic policies that can be used by both RIP and SAP as their in/out policies. |
| 1.3.6.1.4.1.2272.1.24.10.1 | RowrcIpxRipOutFilterEntry | not-accessible | current | table entry. |
| 1.3.6.1.4.1.2272.1.24.10.1.1 | ColumnrcIpxRipOutFilterInterface | read-write | current | IPX Network address. The interface to which the policy is applied. |
| 1.3.6.1.4.1.2272.1.24.10.1.2 | ColumnrcIpxRipOutFilterPolicyName | read-write | current | The name of the policy group to which this entry refers. |
| 1.3.6.1.4.1.2272.1.24.10.1.3 | ColumnrcIpxRipOutFilterRowStatus | read-write | current | . |
| 1.3.6.1.4.1.2272.1.24.11 | ScalarrcIpxSapOutFilterTableSize | read-only | current | Used to indicate the number of entries in the table. |
| 1.3.6.1.4.1.2272.1.24.12 | TablercIpxSapOutFilterTable | not-accessible | current | SapOutFilter Table is used to store generic policies that can be used by both RIP and SAP as their in/out policies. |
| 1.3.6.1.4.1.2272.1.24.12.1 | RowrcIpxSapOutFilterEntry | not-accessible | current | table entry. |
| 1.3.6.1.4.1.2272.1.24.12.1.1 | ColumnrcIpxSapOutFilterInterface | read-write | current | IPX Network address. The interface to which the policy is applied. |
| 1.3.6.1.4.1.2272.1.24.12.1.2 | ColumnrcIpxSapOutFilterPolicyName | read-write | current | The name of the policy group to which this entry refers. |
| 1.3.6.1.4.1.2272.1.24.12.1.3 | ColumnrcIpxSapOutFilterRowStatus | read-write | current | . |
| 1.3.6.1.4.1.2272.1.24.13 | ScalarrcIpxRipInFilterTableSize | read-only | current | Used to indicate the number of entries in the table. |
| 1.3.6.1.4.1.2272.1.24.14 | TablercIpxRipInFilterTable | not-accessible | current | RipInFilter Table is used to store generic policies that can be used by both RIP and SAP as their in/out policies. |
| 1.3.6.1.4.1.2272.1.24.14.1 | RowrcIpxRipInFilterEntry | not-accessible | current | table entry. |
| 1.3.6.1.4.1.2272.1.24.14.1.1 | ColumnrcIpxRipInFilterInterface | read-write | current | IPX Network address. The interface to which the policy is applied. |
| 1.3.6.1.4.1.2272.1.24.14.1.2 | ColumnrcIpxRipInFilterPolicyName | read-write | current | The name of the policy group to which this entry refers. |
| 1.3.6.1.4.1.2272.1.24.14.1.3 | ColumnrcIpxRipInFilterRowStatus | read-write | current | . |
| 1.3.6.1.4.1.2272.1.24.15 | ScalarrcIpxSapInFilterTableSize | read-only | current | Used to indicate the number of entries in the table. |
| 1.3.6.1.4.1.2272.1.24.16 | TablercIpxSapInFilterTable | not-accessible | current | SapInFilter Table is used to store generic policies that can be used by both RIP and SAP as their in/out policies. |
| 1.3.6.1.4.1.2272.1.24.16.1 | RowrcIpxSapInFilterEntry | not-accessible | current | table entry. |
| 1.3.6.1.4.1.2272.1.24.16.1.1 | ColumnrcIpxSapInFilterInterface | read-write | current | IPX Network address. The interface to which the policy is applied. |
| 1.3.6.1.4.1.2272.1.24.16.1.2 | ColumnrcIpxSapInFilterPolicyName | read-write | current | The name of the policy group to which this entry refers. |
| 1.3.6.1.4.1.2272.1.24.16.1.3 | ColumnrcIpxSapInFilterRowStatus | read-write | current | . |
| 1.3.6.1.4.1.2272.1.24.17 | ScalarrcIpxRoutingMethod | read-write | current | This global variable is referenced each time a decision has to be taken |
| 1.3.6.1.4.1.2272.1.24.18 | TablercIpxSapInterfaceTable | not-accessible | current | SapInterface Table is used to store generic policies that can be used by SAP as their in/out policies. |
| 1.3.6.1.4.1.2272.1.24.18.1 | RowrcIpxSapInterfaceEntry | not-accessible | current | table entry. |
| 1.3.6.1.4.1.2272.1.24.18.1.1 | ColumnrcIpxSapInterfaceNetNum | read-only | current | IPX Network address. The interface to which the policy is applied. |
| 1.3.6.1.4.1.2272.1.24.18.1.2 | ColumnrcIpxSapInterfaceInPolicy | read-write | current | The name of the in filter group to which this entry refers. |
| 1.3.6.1.4.1.2272.1.24.18.1.3 | ColumnrcIpxSapInterfaceOutPolicy | read-write | current | The name of the out filter to which this entry refers. |
| 1.3.6.1.4.1.2272.1.24.19 | TablercIpxRipInterfaceTable | not-accessible | current | RipInterface Table is used to store generic policies that can be used by RIP as their in/out policies. |
| 1.3.6.1.4.1.2272.1.24.19.1 | RowrcIpxRipInterfaceEntry | not-accessible | current | table entry. |
| 1.3.6.1.4.1.2272.1.24.19.1.1 | ColumnrcIpxRipInterfaceNetNum | read-only | current | IPX Network address. The interface to which the policy is applied. |
| 1.3.6.1.4.1.2272.1.24.19.1.2 | ColumnrcIpxRipInterfaceInPolicy | read-write | current | The name of the in filter group to which this entry refers. |
| 1.3.6.1.4.1.2272.1.24.19.1.3 | ColumnrcIpxRipInterfaceOutPolicy | read-write | current | The name of the out filter to which this entry refers. |
| 1.3.6.1.4.1.2272.1.24.20 | TablercIpxBrouterTable | not-accessible | current | The table of addressing information relevant to this entity's IPX addresses. This table is used for associating IfIndex and IPX network number. |
| 1.3.6.1.4.1.2272.1.24.20.1 | RowrcIpxBrouterEntry | not-accessible | current | The addressing information for one of this entity's IP addresses. |
| 1.3.6.1.4.1.2272.1.24.20.1.1 | ColumnrcIpxBrouterPortIndex | read-only | current | The index value which uniquely identifies the interface to which this entry is applicable. The interface identified by a particular value of this index is the … |
| 1.3.6.1.4.1.2272.1.24.20.1.2 | ColumnrcIpxBrouterVlanId | read-only | current | The index value which uniquely identifies the interface to which this entry is applicable. The interface identified by a particular value of this index is the … |
| 1.3.6.1.4.1.2272.1.24.20.1.3 | ColumnrcIpxBrouterNetAddr | read-only | current | IPX Network address. |
| 1.3.6.1.4.1.2272.1.24.20.1.4 | ColumnrcIpxBrouterEncap | read-only | current | Specify IPX encapsulation format. It is relevent if the VLAN is port based. But it's always nice to have it. |
| 1.3.6.1.4.1.2272.1.24.20.1.5 | ColumnrcIpxBrouterMacOffset | read-write | current | IPX Network address. |
| 1.3.6.1.4.1.2272.1.24.20.1.6 | ColumnrcIpxBrouterTicks | read-write | current | The tick value gets updated to the routing table when an ipx address is being assigned to a vlan. |
| 1.3.6.1.4.1.2272.1.24.20.1.7 | ColumnrcIpxBrouterRowStatus | read-write | current | Used to create/delete entries in the rcIpxBrouterEntry. |
| 1.3.6.1.4.1.2272.1.24.21 | NodercIpxRsmlt | |||
| 1.3.6.1.4.1.2272.1.24.21.1 | NodercIpxRsmltGlobal | |||
| 1.3.6.1.4.1.2272.1.24.21.1.1 | ScalarrcIpxRsmltGlobalTableSize | read-only | current | Route Smlt table size. |
| 1.3.6.1.4.1.2272.1.24.21.2 | TablercIpxRsmltOperTable | not-accessible | current | Route Smlt Table |
| 1.3.6.1.4.1.2272.1.24.21.2.1 | RowrcIpxRsmltOperEntry | not-accessible | current | An entry of Ip As Path Access List Table. |
| 1.3.6.1.4.1.2272.1.24.21.2.1.1 | ColumnrcIpxRsmltOperVlanId | read-only | current | Vlan id. |
| 1.3.6.1.4.1.2272.1.24.21.2.1.2 | ColumnrcIpxRsmltOperIfIndex | read-only | current | Route Smlt Oper IfIndex. |
| 1.3.6.1.4.1.2272.1.24.21.2.1.3 | ColumnrcIpxRsmltOperAdminStatus | read-write | current | is a enable/disable flag. |
| 1.3.6.1.4.1.2272.1.24.21.2.1.4 | ColumnrcIpxRsmltOperHoldDownTimer | read-write | current | Timer value, the range of value is from 0 to 3600. |
| 1.3.6.1.4.1.2272.1.24.21.2.1.5 | ColumnrcIpxRsmltOperHoldDownTimeRemaining | read-only | current | The time value that indicate how much time remaining of HoldDownTimer. |
| 1.3.6.1.4.1.2272.1.24.21.2.1.6 | ColumnrcIpxRsmltOperHoldUpTimer | read-write | current | The range of value 0 to 3600 or 9999. 9999 means infinity. |
| 1.3.6.1.4.1.2272.1.24.21.2.1.7 | ColumnrcIpxRsmltOperHoldUpTimeRemaining | read-only | current | The time value that indicate how much time remaining of HoldUpTimer. |
| 1.3.6.1.4.1.2272.1.24.21.2.1.8 | ColumnrcIpxRsmltOperOperStatus | read-only | current | The operation status of Rsmlt, up or down. |
| 1.3.6.1.4.1.2272.1.24.21.2.1.9 | ColumnrcIpxRsmltOperSmltId | read-only | current | The id range for SMLT is 1-32. |
| 1.3.6.1.4.1.2272.1.24.21.2.1.10 | ColumnrcIpxRsmltOperSltId | read-only | current | The id range for SLT is 1-512. |
| 1.3.6.1.4.1.2272.1.24.21.2.1.11 | ColumnrcIpxRsmltOperRowStatus | read-write | current | Row Status. |
| 1.3.6.1.4.1.2272.1.24.21.2.1.12 | ColumnrcIpxRsmltOperMacAddr | read-only | current | Mac Address. |
| 1.3.6.1.4.1.2272.1.24.21.3 | TablercIpxRsmltPeerTable | not-accessible | current | Route Smlt Table |
| 1.3.6.1.4.1.2272.1.24.21.3.1 | RowrcIpxRsmltPeerEntry | not-accessible | current | An entry of Ip As Path Access List Table. |
| 1.3.6.1.4.1.2272.1.24.21.3.1.1 | ColumnrcIpxRsmltPeerVlanId | read-only | current | Vlan id. |
| 1.3.6.1.4.1.2272.1.24.21.3.1.2 | ColumnrcIpxRsmltPeerIfIndex | read-only | current | Route Smlt Oper IfIndex. |
| 1.3.6.1.4.1.2272.1.24.21.3.1.3 | ColumnrcIpxRsmltPeerAdminStatus | read-only | current | is a enable/disable flag. |
| 1.3.6.1.4.1.2272.1.24.21.3.1.4 | ColumnrcIpxRsmltPeerHoldDownTimer | read-only | current | Timer value, the range of value is from 0 to 3600. |
| 1.3.6.1.4.1.2272.1.24.21.3.1.5 | ColumnrcIpxRsmltPeerHoldDownTimeRemaining | read-only | current | The time value that indicate how much time remaining of HoldDownTimer. |
| 1.3.6.1.4.1.2272.1.24.21.3.1.6 | ColumnrcIpxRsmltPeerHoldUpTimer | read-only | current | The range of value 0 to 3600 or 9999. 9999 means infinity. |
| 1.3.6.1.4.1.2272.1.24.21.3.1.7 | ColumnrcIpxRsmltPeerHoldUpTimeRemaining | read-only | current | The time value that indicate how much time remaining of HoldUpTimer. |
| 1.3.6.1.4.1.2272.1.24.21.3.1.8 | ColumnrcIpxRsmltPeerOperStatus | read-only | current | The operation status of Rsmlt, up or down. |
| 1.3.6.1.4.1.2272.1.24.21.3.1.9 | ColumnrcIpxRsmltPeerSmltId | read-only | current | The id range for SMLT is 1-32. |
| 1.3.6.1.4.1.2272.1.24.21.3.1.10 | ColumnrcIpxRsmltPeerSltId | read-only | current | The id range for SLT is 1-512. |
| 1.3.6.1.4.1.2272.1.24.21.3.1.11 | ColumnrcIpxRsmltPeerMacAddr | read-only | current | Mac Address. |
| 1.3.6.1.4.1.2272.1.24.22 | NodercIpxRipGlobal | |||
| 1.3.6.1.4.1.2272.1.24.22.1 | ScalarrcIpxRipGlobalPace | read-write | current | The maximum pace, in packets per second, at which RIP packets may be sent on this circuit. |
| 1.3.6.1.4.1.2272.1.24.22.2 | ScalarrcIpxRipGlobalUpdate | read-write | current | The RIP periodic update interval, in seconds. |
| 1.3.6.1.4.1.2272.1.24.22.3 | ScalarrcIpxRipGlobalAgeMultiplier | read-write | current | The holding multiplier for information received in RIP periodic updates. |
| 1.3.6.1.4.1.2272.1.26 | NodercPos | |||
| 1.3.6.1.4.1.2272.1.26.1 | TablercPosPppIpxTable | not-accessible | current | |
| 1.3.6.1.4.1.2272.1.26.1.1 | RowrcPosPppIpxEntry | not-accessible | current | |
| 1.3.6.1.4.1.2272.1.26.1.1.1 | ColumnrcPosPppIpxIfIndex | read-only | current | port number. |
| 1.3.6.1.4.1.2272.1.26.1.1.2 | ColumnrcPosPppIpxIpxcpAdminStatus | read-write | current | |
| 1.3.6.1.4.1.2272.1.26.1.1.3 | ColumnrcPosPppIpxOperStatus | read-only | current | |
| 1.3.6.1.4.1.2272.1.26.1.1.4 | ColumnrcPosPppIpxNetAddr | read-write | current | IPX Network address. |
| 1.3.6.1.4.1.2272.1.26.1.1.5 | ColumnrcPosPppIpxRoutingProtocol | read-write | current | |
| 1.3.6.1.4.1.2272.1.26.2 | TablercPosSonetTable | not-accessible | current | |
| 1.3.6.1.4.1.2272.1.26.2.1 | RowrcPosSonetEntry | not-accessible | current | |
| 1.3.6.1.4.1.2272.1.26.2.1.1 | ColumnrcPosSonetIndex | read-only | current | pos ifIndex. |
| 1.3.6.1.4.1.2272.1.26.2.1.2 | ColumnrcPosSonetFraming | read-write | current | |
| 1.3.6.1.4.1.2272.1.26.2.1.3 | ColumnrcPosSonetSectionTrace | read-write | current | config. J0 byte |
| 1.3.6.1.4.1.2272.1.26.2.1.4 | ColumnrcPosSonetSectionGrowth | read-write | current | config. Z0 byte |
| 1.3.6.1.4.1.2272.1.26.2.1.5 | ColumnrcPosSonetSyncronization | read-write | current | config. S1 byte |
| 1.3.6.1.4.1.2272.1.26.2.1.6 | ColumnrcPosSonetStsPathTrace | read-write | current | config. 64/16 byte. |
| 1.3.6.1.4.1.2272.1.26.2.1.7 | ColumnrcPosSonetPathSignalLabel | read-write | current | config. C2 byte |
| 1.3.6.1.4.1.2272.1.26.2.1.8 | ColumnrcPosSonetClockSource | read-write | current | |
| 1.3.6.1.4.1.2272.1.26.2.1.9 | ColumnrcPosSonetScramble | read-write | current | |
| 1.3.6.1.4.1.2272.1.26.2.1.10 | ColumnrcPosSonetOperStatusFraming | read-only | current | |
| 1.3.6.1.4.1.2272.1.26.2.1.11 | ColumnrcPosSonetOperStatusClockSource | read-only | current | |
| 1.3.6.1.4.1.2272.1.26.2.1.12 | ColumnrcPosSonetOperStatusScramble | read-only | current | |
| 1.3.6.1.4.1.2272.1.26.2.1.13 | ColumnrcPosSonetOperStatusSectionTrace | read-only | current | |
| 1.3.6.1.4.1.2272.1.26.2.1.14 | ColumnrcPosSonetOperStatusPathSignalLabel | read-only | current | |
| 1.3.6.1.4.1.2272.1.26.3 | TablercPosLineStatusTable | not-accessible | current | Pos Line Status Table |
| 1.3.6.1.4.1.2272.1.26.3.1 | RowrcPosLineStatusEntry | not-accessible | current | Entry containing information of Pos Line Status. |
| 1.3.6.1.4.1.2272.1.26.3.1.1 | ColumnrcPosLineStatusIndex | read-only | current | pos ifIndex, same as rcPosPppIpxIfIndex. |
| 1.3.6.1.4.1.2272.1.26.3.1.2 | ColumnrcPosLineStatusLocalMACAddress | read-only | current | current local MAC address |
| 1.3.6.1.4.1.2272.1.26.3.1.3 | ColumnrcPosLineStatusRemoteMACAddress | read-only | current | current remote MAC address |
| 1.3.6.1.4.1.2272.1.26.3.1.4 | ColumnrcPosLineStatusLocalIpAddr | read-only | current | current local ip addr |
| 1.3.6.1.4.1.2272.1.26.3.1.5 | ColumnrcPosLineStatusRemoteIpAddr | read-only | current | current remote ip addr |
| 1.3.6.1.4.1.2272.1.26.3.1.6 | ColumnrcPosLineStatusOutQuality | read-only | current | current output quality. |
| 1.3.6.1.4.1.2272.1.26.3.1.7 | ColumnrcPosLineStatusLocalPeriod | read-only | current | |
| 1.3.6.1.4.1.2272.1.26.3.1.8 | ColumnrcPosLineStatusDeviceType | read-only | current | |
| 1.3.6.1.4.1.2272.1.26.3.1.9 | ColumnrcPosLineStatusDeviceRev | read-only | current | |
| 1.3.6.1.4.1.2272.1.26.3.1.10 | ColumnrcPosLineStatusIpxRoutingProtocol | read-only | current | |
| 1.3.6.1.4.1.2272.1.26.4 | TablercPosLineConfigTable | not-accessible | current | Pos Line Config Table |
| 1.3.6.1.4.1.2272.1.26.4.1 | RowrcPosLineConfigEntry | not-accessible | current | Entry containing information of Pos Line Config. |
| 1.3.6.1.4.1.2272.1.26.4.1.1 | ColumnrcPosLineConfigIndex | read-only | current | pos ifIndex, same as rcPosPppIpxIfIndex. |
| 1.3.6.1.4.1.2272.1.26.4.1.2 | ColumnrcPosLineConfigLocalMACAddress | read-write | current | current local MAC address |
| 1.3.6.1.4.1.2272.1.26.4.1.3 | ColumnrcPosLineConfigRemoteMACAddress | read-write | current | current remote MAC address |
| 1.3.6.1.4.1.2272.1.26.4.1.4 | ColumnrcPosLineConfigLocalIpAddr | read-write | current | current local ip addr |
| 1.3.6.1.4.1.2272.1.26.4.1.5 | ColumnrcPosLineConfigRemoteIpAddr | read-write | current | current remote ip addr |
| 1.3.6.1.4.1.2272.1.26.4.1.6 | ColumnrcPosLineConfigRemoteReportPeriod | read-write | current | config. remote report period. |
| 1.3.6.1.4.1.2272.1.26.4.1.7 | ColumnrcPosLineConfigLqrThreshold | read-write | current | config. input quality. |
| 1.3.6.1.4.1.2272.1.26.4.1.8 | ColumnrcPosLineConfigOutQuality | read-write | current | config. output quality. |
| 1.3.6.1.4.1.2272.1.26.4.1.9 | ColumnrcPosLineConfigPppStp | read-write | current | STP PPP encoding enable T/F |
| 1.3.6.1.4.1.2272.1.26.4.1.10 | ColumnrcPosLineConfigLoopBack | read-write | current | perform loop-back. |
| 1.3.6.1.4.1.2272.1.26.4.1.11 | ColumnrcPosLineConfigIpxVlanMacAddress | read-write | current | |
| 1.3.6.1.4.1.2272.1.26.4.1.12 | ColumnrcPosLineConfigIpxRemoteMacAddress | read-write | current | |
| 1.3.6.1.4.1.2272.1.26.5 | NodercPosSonetTrap | |||
| 1.3.6.1.4.1.2272.1.26.5.1 | ScalarrcPosSonetTrapType | read-only | current | Used to indicate a particular type of Sonet trap. |
| 1.3.6.1.4.1.2272.1.26.5.2 | ScalarrcPosSonetTrapIndication | read-only | current | Used to indicate an indication for a Sonet trap. |
| 1.3.6.1.4.1.2272.1.26.6 | TablercPosSioCardConfigTable | not-accessible | current | Pos Sio Card Config Table |
| 1.3.6.1.4.1.2272.1.26.6.1 | RowrcPosSioCardConfigEntry | not-accessible | current | Entry containing information of Pos Sio Card Config. |
| 1.3.6.1.4.1.2272.1.26.6.1.1 | ColumnrcPosSioCardConfigSlotIndex | read-only | current | slot Index. |
| 1.3.6.1.4.1.2272.1.26.6.1.2 | ColumnrcPosSioCardConfigAction | read-write | current | |
| 1.3.6.1.4.1.2272.1.26.6.1.3 | ColumnrcPosSioCardConfigTraceMode | read-write | current | |
| 1.3.6.1.4.1.2272.1.26.6.1.4 | ColumnrcPosSioCardConfigImageFileName | read-only | current | POS Image file name. |
| 1.3.6.1.4.1.2272.1.26.7 | TablercPosOperStatusTable | not-accessible | current | |
| 1.3.6.1.4.1.2272.1.26.7.1 | RowrcPosOperStatusEntry | not-accessible | current | |
| 1.3.6.1.4.1.2272.1.26.7.1.1 | ColumnrcPosOperStatusIndex | read-only | current | pos ifIndex. |
| 1.3.6.1.4.1.2272.1.26.7.1.2 | ColumnrcPosOperStatusLqrStatus | read-only | current | Operational status of pppLqrConfigStatus. |
| 1.3.6.1.4.1.2272.1.26.7.1.3 | ColumnrcPosOperStatusLineLqrThreshold | read-only | current | . |
| 1.3.6.1.4.1.2272.1.26.7.1.4 | ColumnrcPosOperStatusLinkMagicNumber | read-only | current | . |
| 1.3.6.1.4.1.2272.1.26.7.1.5 | ColumnrcPosOperStatusLinePppStp | read-only | current | |
| 1.3.6.1.4.1.2272.1.27 | NodercLinkFlapDetect | |||
| 1.3.6.1.4.1.2272.1.27.1 | ScalarrcLinkFlapDetectAutoPortDownEnable | read-write | current | Used to enable/disable the Link Flap Detect feature. When enabled this feature will monitor the number of times a port goes down during a certain interval. If … |
| 1.3.6.1.4.1.2272.1.27.2 | ScalarrcLinkFlapDetectSendTrap | read-write | current | Used to configure whether a trap should be sent if the port is forced out-of-service. |
| 1.3.6.1.4.1.2272.1.27.3 | ScalarrcLinkFlapDetectFrequency | read-write | current | Used to configure the number of times the port can go down. |
| 1.3.6.1.4.1.2272.1.27.4 | ScalarrcLinkFlapDetectInterval | read-write | current | Used to configure the interval (in minutes). |
| 1.3.6.1.4.1.2272.1.28 | NodercV1Traps | |||
| 1.3.6.1.4.1.2272.1.29 | NodercRadius | |||
| 1.3.6.1.4.1.2272.1.29.1 | NodercRadiusGlobal | |||
| 1.3.6.1.4.1.2272.1.29.1.1 | ScalarrcRadiusGlobalEnable | read-write | current | Enable/disable this feature. |
| 1.3.6.1.4.1.2272.1.29.1.2 | ScalarrcRadiusGlobalMaxNumberServer | read-write | current | Maximum number of RADIUS servers. |
| 1.3.6.1.4.1.2272.1.29.1.3 | ScalarrcRadiusGlobalAttributeValue | read-write | current | Integer value for Access-Priority attribute. |
| 1.3.6.1.4.1.2272.1.29.1.4 | ScalarrcRadiusGlobalServerTableSize | read-only | current | Used to indicate the number of entries in the rcRadiusServerTable. |
| 1.3.6.1.4.1.2272.1.29.1.5 | ScalarrcRadiusGlobalAcctEnable | read-write | current | Enable/disable Radius Accounting feature. |
| 1.3.6.1.4.1.2272.1.29.1.6 | ScalarrcRadiusGlobalAcctAttributeValue | read-write | current | Integer value for User-Command attribute. |
| 1.3.6.1.4.1.2272.1.29.1.7 | ScalarrcRadiusGlobalAcctIncludeCli | read-write | current | Include/Exclude cli-commands in radius acccounting updates. |
| 1.3.6.1.4.1.2272.1.29.1.8 | ScalarrcRadiusGlobalClearStat | read-write | current | Clear Radius Statistic for all servers configured. |
| 1.3.6.1.4.1.2272.1.29.1.9 | ScalarrcRadiusGlobalMcastAttributeValue | read-write | current | Integer value for multicast address vendor specific attribute. |
| 1.3.6.1.4.1.2272.1.29.1.10 | ScalarrcRadiusGlobalAuthInfoAttributeValue | read-write | current | Integer value for Auth-Info vendor specific attribute. |
| 1.3.6.1.4.1.2272.1.29.1.11 | ScalarrcRadiusGlobalCommandAccess | read-write | current | Integer value for Command-Access attribute. |
| 1.3.6.1.4.1.2272.1.29.1.12 | ScalarrcRadiusGlobalCliCommands | read-write | current | Integer value for Cli-Command attribute. |
| 1.3.6.1.4.1.2272.1.29.1.13 | ScalarrcRadiusGlobalIgapLogFSize | read-write | current | Maximum size for the IGAP accounting time-out log file in KB. |
| 1.3.6.1.4.1.2272.1.29.1.14 | ScalarrcRadiusGlobalCliProfEnable | read-write | current | Enable/disable Radius CLI Profiling. |
| 1.3.6.1.4.1.2272.1.29.1.15 | ScalarrcRadiusGlobalAuthInvalidServerAddress | read-only | current | Number of Access Responses from unknown or invalid Radius servers. |
| 1.3.6.1.4.1.2272.1.29.1.16 | ScalarrcRadiusGlobalSourceIpFlag | read-write | current | Flag to include configured IP address as source address in RADIUS packets. |
| 1.3.6.1.4.1.2272.1.29.1.17 | ScalarrcRadiusGlobalIgapPasswdAttr | read-write | current | When this variable is set to standard(1), password in IGAP join request is sent in standard RADIUS password attribute. When set to authinfo(2), the password is… |
| 1.3.6.1.4.1.2272.1.29.1.18 | ScalarrcRadiusGlobalCliCmdCount | read-write | current | Integer value for Cli-Command-count. |
| 1.3.6.1.4.1.2272.1.29.1.21 | ScalarrcRadiusReachabilityUserName | read-write | current | The username used for the RADIUS server reachability useDummyRadiusRequests option. |
| 1.3.6.1.4.1.2272.1.29.1.22 | ScalarrcRadiusReachabilityPassword | read-write | current | The password used for the RADIUS server reachability useDummyRadiusRequests option. |
| 1.3.6.1.4.1.2272.1.29.1.23 | ScalarrcRadiusReachabilityUnreachableTimer | read-write | current | This object specifies the interval between checks when the RADIUS server is unreachable. |
| 1.3.6.1.4.1.2272.1.29.1.24 | ScalarrcRadiusReachabilityKeepAliveTimer | read-write | current | This object specifies the interval between checks when the RADIUS server is reachable. |
| 1.3.6.1.4.1.2272.1.29.1.25 | ScalarrcRadiusSupportedVendorIds | read-only | current | This object specifies the supported radius vendor ids. |
| 1.3.6.1.4.1.2272.1.29.2 | TablercRadiusServerTable | not-accessible | obsolete | The RADIUS table (0 to 10 entries). This table lists the information of the RADIUS server. |
| 1.3.6.1.4.1.2272.1.29.2.1 | RowrcRadiusServerEntry | not-accessible | obsolete | A RADIUS server table entry. |
| 1.3.6.1.4.1.2272.1.29.2.1.1 | ColumnrcRadiusServerPriority | read-write | obsolete | Server priority, used to control which server to choose first to send authentication. |
| 1.3.6.1.4.1.2272.1.29.2.1.2 | ColumnrcRadiusServerAddress | read-write | obsolete | Server IP address of the RADIUS authentication server referred to in this table entry. |
| 1.3.6.1.4.1.2272.1.29.2.1.3 | ColumnrcRadiusServerTimeOut | read-write | obsolete | The time interval in seconds before the client retransmit the packet. |
| 1.3.6.1.4.1.2272.1.29.2.1.4 | ColumnrcRadiusServerEnable | read-write | obsolete | Enable or disable this server. |
| 1.3.6.1.4.1.2272.1.29.2.1.5 | ColumnrcRadiusServerMaxRetries | read-write | obsolete | Maximum number of retransmissions. |
| 1.3.6.1.4.1.2272.1.29.2.1.6 | ColumnrcRadiusServerUdpPort | read-write | obsolete | The UDP port the client is using to send requests to this server. |
| 1.3.6.1.4.1.2272.1.29.2.1.7 | ColumnrcRadiusServerSecretKey | read-write | obsolete | The identifier of the RADIUS authentication client. |
| 1.3.6.1.4.1.2272.1.29.2.1.8 | ColumnrcRadiusServerAccessRequests | read-only | obsolete | The number of RADIUS access-response packets sent to this server. This does not include retransmissions. |
| 1.3.6.1.4.1.2272.1.29.2.1.9 | ColumnrcRadiusServerAccessAccepts | read-only | obsolete | The number of RADIUS access-accept packets (valid or invalid) received from this server. |
| 1.3.6.1.4.1.2272.1.29.2.1.10 | ColumnrcRadiusServerAccessRejects | read-only | obsolete | The number of RADIUS access-reject packets (valid or invalid) received from this server. |
| 1.3.6.1.4.1.2272.1.29.2.1.11 | ColumnrcRadiusServerBadResponses | read-only | obsolete | The number of RADIUS invalid access-response packets received from this server. |
| 1.3.6.1.4.1.2272.1.29.2.1.12 | ColumnrcRadiusServerPendingRequests | read-only | obsolete | The number of RADIUS access-request packets destined for this server that have not yet timed out or received a response. This variable is incremented when an a… |
| 1.3.6.1.4.1.2272.1.29.2.1.13 | ColumnrcRadiusServerClientRetries | read-only | obsolete | The number of authentication retransmission to this server. |
| 1.3.6.1.4.1.2272.1.29.2.1.14 | ColumnrcRadiusServerRowStatus | read-write | obsolete | Used to create/delete entries. |
| 1.3.6.1.4.1.2272.1.29.2.1.15 | ColumnrcRadiusServerAcctEnable | read-write | obsolete | Enable or disable Radius Accounting on this server. |
| 1.3.6.1.4.1.2272.1.29.2.1.16 | ColumnrcRadiusServerAcctUdpPort | read-write | obsolete | The UDP port the client used to send accounting requests to this server. |
| 1.3.6.1.4.1.2272.1.29.2.1.17 | ColumnrcRadiusServerAcctOnRequests | read-only | obsolete | The number of RADIUS accounting-on packets sent to this server. This does not include retransmissions. |
| 1.3.6.1.4.1.2272.1.29.2.1.18 | ColumnrcRadiusServerAcctOffRequests | read-only | obsolete | The number of RADIUS accounting-off packets sent to this server. This does not include retransmissions. |
| 1.3.6.1.4.1.2272.1.29.2.1.19 | ColumnrcRadiusServerAcctStartRequests | read-only | obsolete | The number of RADIUS accounting-start packets sent to this server. This does not include retransmissions. |
| 1.3.6.1.4.1.2272.1.29.2.1.20 | ColumnrcRadiusServerAcctStopRequests | read-only | obsolete | The number of RADIUS accounting-stop packets sent to this server. This does not include retransmissions. |
| 1.3.6.1.4.1.2272.1.29.2.1.21 | ColumnrcRadiusServerAcctInterimRequests | read-only | obsolete | The number of RADIUS accounting-interim packets sent to this server. This does not include retransmissions. |
| 1.3.6.1.4.1.2272.1.29.2.1.22 | ColumnrcRadiusServerAcctBadResponses | read-only | obsolete | The number of Invalid responses received from this server. |
| 1.3.6.1.4.1.2272.1.29.2.1.23 | ColumnrcRadiusServerAcctPendingRequests | read-only | obsolete | The number of RADIUS accounting packets that are waiting be sent to this server. This variable is incremented whenever any accounting-request is sent to this s… |
| 1.3.6.1.4.1.2272.1.29.2.1.24 | ColumnrcRadiusServerAcctClientRetries | read-only | obsolete | The number of RADIUS accounting packets retransmitted to this server. |
| 1.3.6.1.4.1.2272.1.29.3 | TablercRadiusServTable | not-accessible | deprecated | The RADIUS table (0 to 10 entries). This table lists the information of the RADIUS server. |
| 1.3.6.1.4.1.2272.1.29.3.1 | RowrcRadiusServEntry | not-accessible | deprecated | A RADIUS server table entry. |
| 1.3.6.1.4.1.2272.1.29.3.1.1 | ColumnrcRadiusServPriority | read-write | deprecated | Server priority, used to control which server to choose first to send authentication. |
| 1.3.6.1.4.1.2272.1.29.3.1.2 | ColumnrcRadiusServAddress | read-write | deprecated | Server IP address of the RADIUS authentication server referred to in this table entry. |
| 1.3.6.1.4.1.2272.1.29.3.1.3 | ColumnrcRadiusServTimeOut | read-write | deprecated | The time interval in seconds before the client retransmit the packet. |
| 1.3.6.1.4.1.2272.1.29.3.1.4 | ColumnrcRadiusServEnable | read-write | deprecated | Enable or disable this server. |
| 1.3.6.1.4.1.2272.1.29.3.1.5 | ColumnrcRadiusServMaxRetries | read-write | deprecated | Maximum number of retransmissions. |
| 1.3.6.1.4.1.2272.1.29.3.1.6 | ColumnrcRadiusServUdpPort | read-write | deprecated | The UDP port the client is using to send requests to this server. |
| 1.3.6.1.4.1.2272.1.29.3.1.7 | ColumnrcRadiusServSecretKey | read-write | deprecated | The identifier of the RADIUS authentication client. |
| 1.3.6.1.4.1.2272.1.29.3.1.8 | ColumnrcRadiusServAccessRequests | read-only | deprecated | The number of RADIUS access-response packets sent to this server. This does not include retransmissions. |
| 1.3.6.1.4.1.2272.1.29.3.1.9 | ColumnrcRadiusServAccessAccepts | read-only | deprecated | The number of RADIUS access-accept packets (valid or invalid) received from this server. |
| 1.3.6.1.4.1.2272.1.29.3.1.10 | ColumnrcRadiusServAccessRejects | read-only | deprecated | The number of RADIUS access-reject packets (valid or invalid) received from this server. |
| 1.3.6.1.4.1.2272.1.29.3.1.11 | ColumnrcRadiusServBadResponses | read-only | deprecated | The number of RADIUS invalid access-response packets received from this server. |
| 1.3.6.1.4.1.2272.1.29.3.1.12 | ColumnrcRadiusServPendingRequests | read-only | deprecated | The number of RADIUS access-request packets destined for this server that have not yet timed out or received a response. This variable is incremented when an a… |
| 1.3.6.1.4.1.2272.1.29.3.1.13 | ColumnrcRadiusServClientRetries | read-only | deprecated | The number of authentication retransmission to this server. |
| 1.3.6.1.4.1.2272.1.29.3.1.14 | ColumnrcRadiusServRowStatus | read-write | deprecated | Used to create/delete entries. |
| 1.3.6.1.4.1.2272.1.29.3.1.15 | ColumnrcRadiusServAcctEnable | read-write | deprecated | Enable or disable Radius Accounting on this server. |
| 1.3.6.1.4.1.2272.1.29.3.1.16 | ColumnrcRadiusServAcctUdpPort | read-write | deprecated | The UDP port the client used to send accounting requests to this server. |
| 1.3.6.1.4.1.2272.1.29.3.1.17 | ColumnrcRadiusServAcctOnRequests | read-only | deprecated | The number of RADIUS accounting-on packets sent to this server. This does not include retransmissions. |
| 1.3.6.1.4.1.2272.1.29.3.1.18 | ColumnrcRadiusServAcctOffRequests | read-only | deprecated | The number of RADIUS accounting-off packets sent to this server. This does not include retransmissions. |
| 1.3.6.1.4.1.2272.1.29.3.1.19 | ColumnrcRadiusServAcctStartRequests | read-only | deprecated | The number of RADIUS accounting-start packets sent to this server. This does not include retransmissions. |
| 1.3.6.1.4.1.2272.1.29.3.1.20 | ColumnrcRadiusServAcctStopRequests | read-only | deprecated | The number of RADIUS accounting-stop packets sent to this server. This does not include retransmissions. |
| 1.3.6.1.4.1.2272.1.29.3.1.21 | ColumnrcRadiusServAcctInterimRequests | read-only | deprecated | The number of RADIUS accounting-interim packets sent to this server. This does not include retransmissions. |
| 1.3.6.1.4.1.2272.1.29.3.1.22 | ColumnrcRadiusServAcctBadResponses | read-only | deprecated | The number of Invalid responses received from this server. |
| 1.3.6.1.4.1.2272.1.29.3.1.23 | ColumnrcRadiusServAcctPendingRequests | read-only | deprecated | The number of RADIUS accounting packets that are waiting be sent to this server. This variable is incremented whenever any accounting-request is sent to this s… |
| 1.3.6.1.4.1.2272.1.29.3.1.24 | ColumnrcRadiusServAcctClientRetries | read-only | deprecated | The number of RADIUS accounting packets retransmitted to this server. |
| 1.3.6.1.4.1.2272.1.29.3.1.25 | ColumnrcRadiusServUsedBy | read-only | deprecated | cli(1): for cli login, igap(2): for igap,snmp(3): for snmp login, eap(4) for EAP PAE Authenticator web(5) for web-server(http/https) login. |
| 1.3.6.1.4.1.2272.1.29.3.1.26 | ColumnrcRadiusServNasIpAddress | read-only | deprecated | RADIUS Client NAS Identifier for this server. |
| 1.3.6.1.4.1.2272.1.29.3.1.27 | ColumnrcRadiusServRoundTripTime | read-only | deprecated | Time different between the instance when a RADIUS request is sent and the corresponding response is received. |
| 1.3.6.1.4.1.2272.1.29.3.1.28 | ColumnrcRadiusServAccessChallanges | read-only | deprecated | The number of RADIUS access-challanges packets sent to this server. This does not include retransmission. |
| 1.3.6.1.4.1.2272.1.29.3.1.29 | ColumnrcRadiusServSourceIpAddr | read-write | deprecated | source IP address RADIUS packets. |
| 1.3.6.1.4.1.2272.1.29.4 | NodercRadiusGlobalSnmp | |||
| 1.3.6.1.4.1.2272.1.29.4.1 | ScalarrcRadiusGlobalSnmpEnable | read-write | current | Enable/disable snmp radius authentication. |
| 1.3.6.1.4.1.2272.1.29.4.2 | ScalarrcRadiusGlobalSnmpAcctEnable | read-write | current | Enable/disable Radius Accounting for SNMP. |
| 1.3.6.1.4.1.2272.1.29.4.3 | ScalarrcRadiusGlobalSnmpReAuthenticateTimer | read-write | current | Integer value representing Re-Authenticate Timer in seconds. Timer to be used to Re- Authenticate a SNMP Session. |
| 1.3.6.1.4.1.2272.1.29.4.4 | ScalarrcRadiusGlobalSnmpAbortSessionTimer | read-write | current | Integer value representing the time in seconds after which the snmp session is considered expired and Radius Accounting Stop message is sent. |
| 1.3.6.1.4.1.2272.1.29.4.5 | ScalarrcRadiusGlobalSnmpUserName | read-write | current | User name for Radius SNMP Accounting. |
| 1.3.6.1.4.1.2272.1.29.4.6 | ScalarrcRadiusEapLastRejMac | read-only | current | Used to store the Last Rejected MAC address on an EAP enabled port. |
| 1.3.6.1.4.1.2272.1.29.4.7 | ScalarrcRadiusPaePortNumber | read-only | current | Used to store the Port Number on which the Mac Intrusion happened. |
| 1.3.6.1.4.1.2272.1.29.4.8 | ScalarrcRadiusEapLastAuthMac | read-only | current | Used to store the Last Authenticated MAC address on an EAP enabled port. |
| 1.3.6.1.4.1.2272.1.29.5 | TablercRadiusServHostTable | not-accessible | current | The RADIUS Server Host table (0 to 10 entries). This table lists the information of the RADIUS server. |
| 1.3.6.1.4.1.2272.1.29.5.1 | RowrcRadiusServHostEntry | not-accessible | current | A RADIUS server table entry. |
| 1.3.6.1.4.1.2272.1.29.5.1.1 | ColumnrcRadiusServHostAddressType | not-accessible | current | Inet Address Type of radius server host address. |
| 1.3.6.1.4.1.2272.1.29.5.1.2 | ColumnrcRadiusServHostAddress | not-accessible | current | Server IP address of the RADIUS authentication server referred to in this table entry. |
| 1.3.6.1.4.1.2272.1.29.5.1.3 | ColumnrcRadiusServHostUsedBy | not-accessible | current | cli(1): for cli login, igap(2): for igap,snmp(3): for snmp login, eap(4) for EAP PAE Authenticator web(5) for web-server(http/https) login. IGAP is not support… |
| 1.3.6.1.4.1.2272.1.29.5.1.4 | ColumnrcRadiusServHostPriority | read-create | current | Server priority, used to control which server to choose first to send authentication. |
| 1.3.6.1.4.1.2272.1.29.5.1.5 | ColumnrcRadiusServHostTimeOut | read-create | current | The time interval in seconds before the client retransmit the packet. |
| 1.3.6.1.4.1.2272.1.29.5.1.6 | ColumnrcRadiusServHostEnable | read-create | current | Enable or disable this server. |
| 1.3.6.1.4.1.2272.1.29.5.1.7 | ColumnrcRadiusServHostMaxRetries | read-create | current | Maximum number of retransmissions. |
| 1.3.6.1.4.1.2272.1.29.5.1.8 | ColumnrcRadiusServHostUdpPort | read-create | current | The UDP port the client is using to send requests to this server. |
| 1.3.6.1.4.1.2272.1.29.5.1.9 | ColumnrcRadiusServHostSecretKey | read-create | current | The identifier of the RADIUS authentication client. |
| 1.3.6.1.4.1.2272.1.29.5.1.10 | ColumnrcRadiusServHostAccessRequests | read-only | current | The number of RADIUS access-response packets sent to this server. This does not include retransmissions. |
| 1.3.6.1.4.1.2272.1.29.5.1.11 | ColumnrcRadiusServHostAccessAccepts | read-only | current | The number of RADIUS access-accept packets (valid or invalid) received from this server. |
| 1.3.6.1.4.1.2272.1.29.5.1.12 | ColumnrcRadiusServHostAccessRejects | read-only | current | The number of RADIUS access-reject packets (valid or invalid) received from this server. |
| 1.3.6.1.4.1.2272.1.29.5.1.13 | ColumnrcRadiusServHostBadResponses | read-only | current | The number of RADIUS invalid access-response packets received from this server. |
| 1.3.6.1.4.1.2272.1.29.5.1.14 | ColumnrcRadiusServHostPendingRequests | read-only | current | The number of RADIUS access-request packets destined for this server that have not yet timed out or received a response. This variable is incremented when an a… |
| 1.3.6.1.4.1.2272.1.29.5.1.15 | ColumnrcRadiusServHostClientRetries | read-only | current | The number of authentication retransmission to this server. |
| 1.3.6.1.4.1.2272.1.29.5.1.16 | ColumnrcRadiusServHostRowStatus | read-create | current | Used to create/delete entries. |
| 1.3.6.1.4.1.2272.1.29.5.1.17 | ColumnrcRadiusServHostAcctEnable | read-create | current | Enable or disable Radius Accounting on this server. |
| 1.3.6.1.4.1.2272.1.29.5.1.18 | ColumnrcRadiusServHostAcctUdpPort | read-create | current | The UDP port the client used to send accounting requests to this server. |
| 1.3.6.1.4.1.2272.1.29.5.1.19 | ColumnrcRadiusServHostAcctOnRequests | read-only | current | The number of RADIUS accounting-on packets sent to this server. This does not include retransmissions. |
| 1.3.6.1.4.1.2272.1.29.5.1.20 | ColumnrcRadiusServHostAcctOffRequests | read-only | current | The number of RADIUS accounting-off packets sent to this server. This does not include retransmissions. |
| 1.3.6.1.4.1.2272.1.29.5.1.21 | ColumnrcRadiusServHostAcctStartRequests | read-only | current | The number of RADIUS accounting-start packets sent to this server. This does not include retransmissions. |
| 1.3.6.1.4.1.2272.1.29.5.1.22 | ColumnrcRadiusServHostAcctStopRequests | read-only | current | The number of RADIUS accounting-stop packets sent to this server. This does not include retransmissions. |
| 1.3.6.1.4.1.2272.1.29.5.1.23 | ColumnrcRadiusServHostAcctInterimRequests | read-only | current | The number of RADIUS accounting-interim packets sent to this server. This does not include retransmissions. |
| 1.3.6.1.4.1.2272.1.29.5.1.24 | ColumnrcRadiusServHostAcctBadResponses | read-only | current | The number of Invalid responses received from this server. |
| 1.3.6.1.4.1.2272.1.29.5.1.25 | ColumnrcRadiusServHostAcctPendingRequests | read-only | current | The number of RADIUS accounting packets that are waiting be sent to this server. This variable is incremented whenever any accounting-request is sent to this s… |
| 1.3.6.1.4.1.2272.1.29.5.1.26 | ColumnrcRadiusServHostAcctClientRetries | read-only | current | The number of RADIUS accounting packets retransmitted to this server. |
| 1.3.6.1.4.1.2272.1.29.5.1.27 | ColumnrcRadiusServHostNasIpAddress | read-only | current | RADIUS Client NAS Identifier for this server. |
| 1.3.6.1.4.1.2272.1.29.5.1.28 | ColumnrcRadiusServHostRoundTripTime | read-only | current | Time different between the instance when a RADIUS request is sent and the corresponding response is received. |
| 1.3.6.1.4.1.2272.1.29.5.1.29 | ColumnrcRadiusServHostAccessChallanges | read-only | current | The number of RADIUS access-challanges packets sent to this server. This does not include retransmission. |
| 1.3.6.1.4.1.2272.1.29.5.1.30 | ColumnrcRadiusServHostSourceIpAddr | read-create | current | source IP address RADIUS packets. |
| 1.3.6.1.4.1.2272.1.29.8 | NodercRadiusNotifications | |||
| 1.3.6.1.4.1.2272.1.29.8.1 | NodercRadiusNotificationObjects | |||
| 1.3.6.1.4.1.2272.1.29.8.1.1 | ScalarrcRadiusEapRAVErrorMacAddress | accessible-for-notify | current | The MAC address that was authorized on a port which could not be moved to the Radius-Assigned VLAN. |
| 1.3.6.1.4.1.2272.1.29.8.1.2 | ScalarrcRadiusEapRAVErrorPort | accessible-for-notify | current | The ifIndex of the port that could not be moved to the Radius-Assigned VLAN. |
| 1.3.6.1.4.1.2272.1.29.8.1.3 | ScalarrcRadiusEapServAddressType | accessible-for-notify | current | Address type of a EAP Radius server. To be used with rcRadiusEapServAddress. |
| 1.3.6.1.4.1.2272.1.29.8.1.4 | ScalarrcRadiusEapServAddress | accessible-for-notify | current | Address of a EAP Radius server. To be used with rcRadiusEapServAddressType. |
| 1.3.6.1.4.1.2272.1.30 | NodercIgmp | |||
| 1.3.6.1.4.1.2272.1.30.1 | TablercIgmpInterfaceExtnTable | not-accessible | current | |
| 1.3.6.1.4.1.2272.1.30.1.1 | RowrcIgmpInterfaceExtnEntry | not-accessible | current | |
| 1.3.6.1.4.1.2272.1.30.1.1.1 | ColumnrcIgmpInterfaceExtnIfIndex | read-only | current | ifindex. |
| 1.3.6.1.4.1.2272.1.30.1.1.2 | ColumnrcIgmpInterfaceExtnSnoopEnable | read-write | current | enable snoop. |
| 1.3.6.1.4.1.2272.1.30.1.1.3 | ColumnrcIgmpInterfaceExtnProxySnoopEnable | read-write | current | enable proxy snoop. |
| 1.3.6.1.4.1.2272.1.30.1.1.4 | ColumnrcIgmpInterfaceExtnMaxAdvertiseInterval | read-write | current | |
| 1.3.6.1.4.1.2272.1.30.1.1.5 | ColumnrcIgmpInterfaceExtnMinAdvertiseInterval | read-write | current | |
| 1.3.6.1.4.1.2272.1.30.1.1.6 | ColumnrcIgmpInterfaceExtnMaxInitialAdvertiseInterval | read-write | current | |
| 1.3.6.1.4.1.2272.1.30.1.1.7 | ColumnrcIgmpInterfaceExtnMaxInitialAdvertments | read-write | current | |
| 1.3.6.1.4.1.2272.1.30.1.1.8 | ColumnrcIgmpInterfaceExtnNeighborDeadInterval | read-write | current | |
| 1.3.6.1.4.1.2272.1.30.1.1.9 | ColumnrcIgmpInterfaceExtnFastLeaveEnable | read-write | current | Enable fast leave on this interface. |
| 1.3.6.1.4.1.2272.1.30.1.1.10 | ColumnrcIgmpInterfaceExtnFastLeavePortMembers | read-write | current | The set of ports that are enabled for fast leave. |
| 1.3.6.1.4.1.2272.1.30.1.1.11 | ColumnrcIgmpInterfaceExtnMrdiscEnable | read-write | current | Enable/disable multicast router discovery. |
| 1.3.6.1.4.1.2272.1.30.1.1.12 | ColumnrcIgmpInterfaceExtnDiscoveredRouterPorts | read-only | current | list of ports that discovered by IGMP Multicast router discovery (MRDISC) protocol. |
| 1.3.6.1.4.1.2272.1.30.1.1.13 | ColumnrcIgmpInterfaceExtnSnoopMRouterPorts | read-write | current | The set of ports in this interface that provide connectivity to an IP Multicast router. |
| 1.3.6.1.4.1.2272.1.30.1.1.14 | ColumnrcIgmpInterfaceExtnSnoopActiveMRouterPorts | read-only | current | Active ports. |
| 1.3.6.1.4.1.2272.1.30.1.1.15 | ColumnrcIgmpInterfaceExtnSnoopMRouterExpiration | read-only | current | Multicast querier router aging time out. |
| 1.3.6.1.4.1.2272.1.30.1.1.16 | ColumnrcIgmpInterfaceExtnFlushAction | read-write | current | IGMP flush action. |
| 1.3.6.1.4.1.2272.1.30.1.1.17 | ColumnrcIgmpInterfaceExtnRouterAlertEnable | read-write | current | Enable Router Alert Check. |
| 1.3.6.1.4.1.2272.1.30.1.1.18 | ColumnrcIgmpInterfaceExtnSsmEnable | read-write | current | enable SSM. |
| 1.3.6.1.4.1.2272.1.30.1.1.19 | ColumnrcIgmpInterfaceExtnIgapEnable | read-write | current | enable/disable IGAP. |
| 1.3.6.1.4.1.2272.1.30.1.1.20 | ColumnrcIgmpInterfaceExtnAccntEnable | read-write | current | enable/disable accounting. |
| 1.3.6.1.4.1.2272.1.30.1.1.21 | ColumnrcIgmpInterfaceExtnAuthEnable | read-write | current | enable/disable authentication. |
| 1.3.6.1.4.1.2272.1.30.1.1.22 | ColumnrcIgmpInterfaceExtnStreamLimitEnable | read-write | current | Stream Limitation enable/disable. |
| 1.3.6.1.4.1.2272.1.30.1.1.23 | ColumnrcIgmpInterfaceExtnMaxStreams | read-write | current | Maximum number of stream. |
| 1.3.6.1.4.1.2272.1.30.1.1.24 | ColumnrcIgmpInterfaceExtnNumStreams | read-only | current | Current number of streams. |
| 1.3.6.1.4.1.2272.1.30.1.1.25 | ColumnrcIgmpInterfaceExtnNewQuerier | read-only | current | The address of the New IGMP Querier on the IP subnet to which this interface is attached. |
| 1.3.6.1.4.1.2272.1.30.1.1.26 | ColumnrcIgmpInterfaceExtnSnoopQuerierEnable | read-write | current | enable snoop querier. |
| 1.3.6.1.4.1.2272.1.30.1.1.27 | ColumnrcIgmpInterfaceExtnSnoopQuerierAddr | read-write | current | The pseudo address of the IGMP Snoop Querier. |
| 1.3.6.1.4.1.2272.1.30.1.1.28 | ColumnrcIgmpInterfaceExtnMvrEnable | read-write | current | Enable or disable mcast-vlan-registration on a vlan, it is used to specified a vlan works as a mcast-vlan, maximum 16 mcast-vlan is supported. |
| 1.3.6.1.4.1.2272.1.30.1.1.29 | ColumnrcIgmpInterfaceExtnMvrProxyEnable | read-write | current | enable or disable mcast-vlan-registration proxy on a vlan, you must enable mcast-vlan-registration at first. |
| 1.3.6.1.4.1.2272.1.30.1.1.30 | ColumnrcIgmpInterfaceExtnDynamicDowngradeEnable | read-write | current | enable dynamic downgrade the IGMP version when older version query message was received. |
| 1.3.6.1.4.1.2272.1.30.1.1.31 | ColumnrcIgmpInterfaceExtnCompatibilityModeEnable | read-write | current | enable v2 v3 compatible mode, which will handle the IGMP v2 message in v3 interface |
| 1.3.6.1.4.1.2272.1.30.1.1.32 | ColumnrcIgmpInterfaceExtnOperVersion | read-only | current | The operational version of IGMP which is running on this interface. |
| 1.3.6.1.4.1.2272.1.30.1.1.33 | ColumnrcIgmpInterfaceExtnExplicitHostTrackingEnable | read-write | current | Enable the IGMP protocol running in version 3 to track hosts per channels/groups. |
| 1.3.6.1.4.1.2272.1.30.1.1.34 | ColumnrcIgmpInterfaceExtnMcastMode | read-only | current | IGMP interface mode |
| 1.3.6.1.4.1.2272.1.30.1.1.35 | ColumnrcIgmpInterfaceExtnSnoopMRouterLPorts | read-only | current | The set of logical ports (for example, WLAN tunnels) in this interface that provide connectivity to an IP Multicast router. |
| 1.3.6.1.4.1.2272.1.30.1.1.36 | ColumnrcIgmpInterfaceExtnSnoopActiveMRouterLPorts | read-only | current | Active logical ports (for example, WLAN tunnels). |
| 1.3.6.1.4.1.2272.1.30.1.1.37 | ColumnrcIgmpInterfaceExtnL2Isid | read-only | current | L2 ISID of the cvlan. |
| 1.3.6.1.4.1.2272.1.30.2 | TablercIgmpStaticTable | not-accessible | current | |
| 1.3.6.1.4.1.2272.1.30.2.1 | RowrcIgmpStaticEntry | not-accessible | current | |
| 1.3.6.1.4.1.2272.1.30.2.1.1 | ColumnrcIgmpStaticIfIndex | read-only | current | ifindex |
| 1.3.6.1.4.1.2272.1.30.2.1.2 | ColumnrcIgmpStaticGrpAddr | read-only | current | Ip multicast address. The GrpAddress holds the starting range for the address range. If the ToGrpAddress is not entered, the it is as good as entering a single… |
| 1.3.6.1.4.1.2272.1.30.2.1.3 | ColumnrcIgmpStaticMemberPorts | read-write | current | egressing ports. |
| 1.3.6.1.4.1.2272.1.30.2.1.4 | ColumnrcIgmpStaticNotAllowedToJoin | read-write | current | not allowed to join. |
| 1.3.6.1.4.1.2272.1.30.2.1.5 | ColumnrcIgmpStaticRowStatus | read-write | current | Used to create/delete entries in the rcIgmpStaticEntry. |
| 1.3.6.1.4.1.2272.1.30.2.1.6 | ColumnrcIgmpStaticToGrpAddr | read-write | current | To hold the range for the GrpAddress. |
| 1.3.6.1.4.1.2272.1.30.3 | TablercIgmpAccessTable | not-accessible | current | |
| 1.3.6.1.4.1.2272.1.30.3.1 | RowrcIgmpAccessEntry | not-accessible | current | |
| 1.3.6.1.4.1.2272.1.30.3.1.1 | ColumnrcIgmpAccessIfIndex | read-only | current | ifindex |
| 1.3.6.1.4.1.2272.1.30.3.1.2 | ColumnrcIgmpAccessGrpAddr | read-only | current | ip multicast addr. |
| 1.3.6.1.4.1.2272.1.30.3.1.3 | ColumnrcIgmpAccessHostAddr | read-only | current | host addr. |
| 1.3.6.1.4.1.2272.1.30.3.1.4 | ColumnrcIgmpAccessMode | read-write | current | denyTX(1), denyRX(2), denyBOTH(3). |
| 1.3.6.1.4.1.2272.1.30.3.1.5 | ColumnrcIgmpAccessRowStatus | read-write | current | Used to create/delete entries in the rcIgmpAccessEntry. |
| 1.3.6.1.4.1.2272.1.30.3.1.6 | ColumnrcIgmpAccessHostMask | read-only | current | host mask. |
| 1.3.6.1.4.1.2272.1.30.4 | TablercIgmpSenderTable | not-accessible | current | |
| 1.3.6.1.4.1.2272.1.30.4.1 | RowrcIgmpSenderEntry | not-accessible | current | |
| 1.3.6.1.4.1.2272.1.30.4.1.1 | ColumnrcIgmpSenderGrpAddr | read-only | current | ip multicast addr. |
| 1.3.6.1.4.1.2272.1.30.4.1.2 | ColumnrcIgmpSenderIfIndex | read-only | current | ifindex |
| 1.3.6.1.4.1.2272.1.30.4.1.3 | ColumnrcIgmpSenderMemberAddr | read-only | current | host addr. |
| 1.3.6.1.4.1.2272.1.30.4.1.4 | ColumnrcIgmpSenderAction | read-write | current | none(0), flushEntry(1), flushGrp(2). |
| 1.3.6.1.4.1.2272.1.30.4.1.5 | ColumnrcIgmpSenderTPort | read-only | current | Igmp Sender Tport. |
| 1.3.6.1.4.1.2272.1.30.4.1.6 | ColumnrcIgmpSenderState | read-only | current | Indicates if a sender exists because of an IGMP access filter or not. |
| 1.3.6.1.4.1.2272.1.30.5 | NodercIgmpSsmGlobal | |||
| 1.3.6.1.4.1.2272.1.30.5.1 | ScalarrcIgmpSsmGlobalDynamicLearning | read-write | current | Enable/disable dynamic learning or source/group pair from IGMPv3 report. |
| 1.3.6.1.4.1.2272.1.30.5.2 | ScalarrcIgmpSsmGlobalAdminAction | read-write | current | Set the admin status of all the Ssm entries to enable/disable at once. |
| 1.3.6.1.4.1.2272.1.30.5.3 | ScalarrcIgmpSsmGlobalRangeGroup | read-write | current | If multicast group address & RangeMask == RangeGroup, then RangeGroup is in Ssm Range. Else it is not in the range. |
| 1.3.6.1.4.1.2272.1.30.5.4 | ScalarrcIgmpSsmGlobalRangeMask | read-write | current | Used with RangeGroup. |
| 1.3.6.1.4.1.2272.1.30.6 | TablercIgmpSsmTable | not-accessible | deprecated | |
| 1.3.6.1.4.1.2272.1.30.6.1 | RowrcIgmpSsmEntry | not-accessible | deprecated | |
| 1.3.6.1.4.1.2272.1.30.6.1.1 | ColumnrcIgmpSsmIpMulticastGrp | read-only | deprecated | This is the IP multicast group address that has default range of 232/8. This parameter should be configured by the user. |
| 1.3.6.1.4.1.2272.1.30.6.1.2 | ColumnrcIgmpSsmIpSource | read-write | deprecated | This is the Source's IP address that will be sending traffic to the group source. This parameter should be configured by the user. |
| 1.3.6.1.4.1.2272.1.30.6.1.3 | ColumnrcIgmpSsmLearningMode | read-only | deprecated | This is a read only field that provides information if the entry is statically configured entry (Static) or a dynamically learned entry from IGMPv3 (Dynamic). … |
| 1.3.6.1.4.1.2272.1.30.6.1.4 | ColumnrcIgmpSsmActivity | read-only | deprecated | This is a read only field. It provides the activity on the corresponding (S,G). If the source is active and traffic is flowing to the switch, this field value … |
| 1.3.6.1.4.1.2272.1.30.6.1.5 | ColumnrcIgmpSsmAdminState | read-write | deprecated | The admin state provides information on whether the entry is to be used or not. If the value of this field is Enabled (default), then the entry can be used. If… |
| 1.3.6.1.4.1.2272.1.30.6.1.6 | ColumnrcIgmpSsmRowStatus | read-write | deprecated | Used to create/delete entries. |
| 1.3.6.1.4.1.2272.1.30.7 | TablercIgmpNewAccessTable | not-accessible | current | |
| 1.3.6.1.4.1.2272.1.30.7.1 | RowrcIgmpNewAccessEntry | not-accessible | current | |
| 1.3.6.1.4.1.2272.1.30.7.1.1 | ColumnrcIgmpNewAccessIfIndex | read-only | current | ifindex |
| 1.3.6.1.4.1.2272.1.30.7.1.2 | ColumnrcIgmpNewAccessPrefixListId | read-only | current | Prefix List ID. |
| 1.3.6.1.4.1.2272.1.30.7.1.3 | ColumnrcIgmpNewAccessPrefixListName | read-write | current | Prefix List name. |
| 1.3.6.1.4.1.2272.1.30.7.1.4 | ColumnrcIgmpNewAccessHostAddr | read-only | current | host addr. |
| 1.3.6.1.4.1.2272.1.30.7.1.5 | ColumnrcIgmpNewAccessHostMask | read-only | current | host mask. |
| 1.3.6.1.4.1.2272.1.30.7.1.6 | ColumnrcIgmpNewAccessActionMode | read-write | current | action mode. |
| 1.3.6.1.4.1.2272.1.30.7.1.7 | ColumnrcIgmpNewAccessRowStatus | read-write | current | Used to create/delete entries in the rcIgmpNewAccessEntry. |
| 1.3.6.1.4.1.2272.1.30.8 | TablercIgmpChannelLimitTable | not-accessible | current | |
| 1.3.6.1.4.1.2272.1.30.8.1 | RowrcIgmpChannelLimitEntry | not-accessible | current | |
| 1.3.6.1.4.1.2272.1.30.8.1.1 | ColumnrcIgmpChannelLimitIfIndex | read-only | current | ifindex |
| 1.3.6.1.4.1.2272.1.30.8.1.2 | ColumnrcIgmpChannelLimitPort | read-only | current | The port belong to this vlan. |
| 1.3.6.1.4.1.2272.1.30.8.1.3 | ColumnrcIgmpChannelLimitMaxStreams | read-write | current | Maximum number of stream. |
| 1.3.6.1.4.1.2272.1.30.8.1.4 | ColumnrcIgmpChannelLimitNumStreams | read-only | current | Current number of streams. |
| 1.3.6.1.4.1.2272.1.30.8.1.5 | ColumnrcIgmpChannelLimitRowStatus | read-write | current | Row Status. |
| 1.3.6.1.4.1.2272.1.30.9 | TablercIgmpIgapServiceAbilityTable | not-accessible | current | |
| 1.3.6.1.4.1.2272.1.30.9.1 | RowrcIgmpIgapServiceAbilityEntry | not-accessible | current | |
| 1.3.6.1.4.1.2272.1.30.9.1.1 | ColumnrcIgmpIgapServiceAbilityIfIndex | read-only | current | ifindex |
| 1.3.6.1.4.1.2272.1.30.9.1.2 | ColumnrcIgmpIgapServiceAbilityAuthSuccess | read-only | current | The port belong to this vlan. |
| 1.3.6.1.4.1.2272.1.30.9.1.3 | ColumnrcIgmpIgapServiceAbilityAuthReject | read-only | current | Maximum number of stream. |
| 1.3.6.1.4.1.2272.1.30.9.1.4 | ColumnrcIgmpIgapServiceAbilityRespTimeout | read-only | current | Current number of streams. |
| 1.3.6.1.4.1.2272.1.30.9.1.5 | ColumnrcIgmpIgapServiceAbilityPapJoinReq | read-only | current | Row Status. |
| 1.3.6.1.4.1.2272.1.30.9.1.6 | ColumnrcIgmpIgapServiceAbilityBasicQuery | read-only | current | Current number of streams. |
| 1.3.6.1.4.1.2272.1.30.9.1.7 | ColumnrcIgmpIgapServiceAbilityBasicLeave | read-only | current | Row Status. |
| 1.3.6.1.4.1.2272.1.30.9.1.8 | ColumnrcIgmpIgapServiceAbilityClearStat | read-write | current | Clear Counter. |
| 1.3.6.1.4.1.2272.1.30.10 | NodercIgmpIgapGlobal | |||
| 1.3.6.1.4.1.2272.1.30.10.1 | ScalarrcIgmpIgapGlobalClearAllStat | read-write | current | Clear All IGAP Counters. |
| 1.3.6.1.4.1.2272.1.30.11 | NodercIgmpGlobalParams | |||
| 1.3.6.1.4.1.2272.1.30.11.1 | ScalarrcIgmpFastLeaveMode | read-write | current | Set the fast-leave mode to be used by for all fast-leave enabled IGMP interfaces. |
| 1.3.6.1.4.1.2272.1.30.11.2 | ScalarrcIgmpGenerateTrap | read-write | current | Enabling the IGMP to generate trap. |
| 1.3.6.1.4.1.2272.1.30.11.3 | ScalarrcIgmpGenerateLog | read-write | current | Enabling the IGMP to generate log. |
| 1.3.6.1.4.1.2272.1.30.11.4 | ScalarrcIgmpMvr | read-write | current | Enabling mcast-vlan-registration globally. |
| 1.3.6.1.4.1.2272.1.30.11.5 | ScalarrcIgmpMulticastFilterMode | read-write | current | Enabling the IGMP to filter on unknown multicast streams. |
| 1.3.6.1.4.1.2272.1.30.12 | TablercIgmpCacheExtnTable | not-accessible | current | |
| 1.3.6.1.4.1.2272.1.30.12.1 | RowrcIgmpCacheExtnEntry | not-accessible | current | |
| 1.3.6.1.4.1.2272.1.30.12.1.1 | ColumnrcIgmpCacheExtnType | read-only | current | It takes up either of the two values, dynamic or static depending upon whether the entry is learnt Dynamic or is added statically. |
| 1.3.6.1.4.1.2272.1.30.12.1.2 | ColumnrcIgmpCacheExtnStaticPorts | read-only | current | It displays the static ports for the static joins, this would be null for the dynamic entry. |
| 1.3.6.1.4.1.2272.1.30.12.1.3 | ColumnrcIgmpCacheExtnL2Isid | read-only | current | L2 ISID of the cvlan. |
| 1.3.6.1.4.1.2272.1.30.13 | TablercIgmpSnoopTraceTable | not-accessible | current | The table listing the multicast groups traversing the snoop enabled router |
| 1.3.6.1.4.1.2272.1.30.13.1 | RowrcIgmpSnoopTraceEntry | not-accessible | current | The entry listing the multicast groups traversing the snoop enabled router |
| 1.3.6.1.4.1.2272.1.30.13.1.1 | ColumnrcIgmpSnoopGrpAddr | not-accessible | current | ip mcast addr of grp traversing the router |
| 1.3.6.1.4.1.2272.1.30.13.1.2 | ColumnrcIgmpSnoopSrcAddr | not-accessible | current | Ip src addr of the mcast grp address |
| 1.3.6.1.4.1.2272.1.30.13.1.3 | ColumnrcIgmpSnoopOutVlan | not-accessible | current | Egress vlan id for the mcast group |
| 1.3.6.1.4.1.2272.1.30.13.1.4 | ColumnrcIgmpSnoopInPort | read-only | current | Ingress port for the mcast grp |
| 1.3.6.1.4.1.2272.1.30.13.1.5 | ColumnrcIgmpSnoopInVlan | read-only | current | Ingress vlan id for the mcast source |
| 1.3.6.1.4.1.2272.1.30.13.1.6 | ColumnrcIgmpSnoopOutPort | read-only | current | Egress port of the mcast grp |
| 1.3.6.1.4.1.2272.1.30.13.1.7 | ColumnrcIgmpSnoopType | read-only | current | The port type on which the snoop entry is learnt |
| 1.3.6.1.4.1.2272.1.30.13.1.8 | ColumnrcIgmpSnoopOutLPort | read-only | current | Egress logical port (for example, WLAN tunnel) list of the mcast grp |
| 1.3.6.1.4.1.2272.1.30.14 | TablercIgmpNewGroupTable | not-accessible | current | The (conceptual) table listing the multicast groups configured in the device. |
| 1.3.6.1.4.1.2272.1.30.14.1 | RowrcIgmpNewGroupEntry | not-accessible | current | An entry (conceptual row) representing an Igmp group. |
| 1.3.6.1.4.1.2272.1.30.14.1.1 | ColumnrcIgmpNewGroupIpAddress | not-accessible | current | Multicast group Address (Class D) that others want to join. A group address can be the same for many incoming ports. |
| 1.3.6.1.4.1.2272.1.30.14.1.2 | ColumnrcIgmpNewGroupMembers | not-accessible | current | IP Address of a source that has sent group report wishing to join this group. |
| 1.3.6.1.4.1.2272.1.30.14.1.3 | ColumnrcIgmpNewGroupInPort | not-accessible | current | An unique value to identify a physical interface or a logical interface (VLAN), which has received Group reports from various sources. |
| 1.3.6.1.4.1.2272.1.30.14.1.4 | ColumnrcIgmpNewGroupExpiration | read-only | current | Time left before the group report expired on this port. Only one of this variable port. This variable is updated upon receiving a group report. |
| 1.3.6.1.4.1.2272.1.30.14.1.5 | ColumnrcIgmpNewGroupIfIndex | read-only | current | An unique value to identify a physical interface or a logical interface (VLAN), which has received Group reports from various sources. |
| 1.3.6.1.4.1.2272.1.30.14.1.6 | ColumnrcIgmpNewGroupUserId | read-only | current | User-id sending this group |
| 1.3.6.1.4.1.2272.1.30.14.1.7 | ColumnrcIgmpNewGroupMemberState | read-only | current | Used for IGAP, to indicated member state. |
| 1.3.6.1.4.1.2272.1.30.14.1.8 | ColumnrcIgmpNewGroupSessionTime | read-only | current | Used for IGAP, to indicated the session time in seconds for the member. Session time is started after traffic is available to member. It can be also called Acc… |
| 1.3.6.1.4.1.2272.1.30.14.1.9 | ColumnrcIgmpNewGroupActualInPort | read-only | current | An unique value to identify a physical interface or a logical interface (VLAN), which has received Group reports from various sources. The value of object is s… |
| 1.3.6.1.4.1.2272.1.30.14.1.10 | ColumnrcIgmpNewGroupL2Isid | read-only | current | L2 ISID of the cvlan. |
| 1.3.6.1.4.1.2272.1.30.15 | TablercIgmpInterfaceTable | not-accessible | current | The (conceptual) table listing the interfaces on which IGMP is enabled. |
| 1.3.6.1.4.1.2272.1.30.15.1 | RowrcIgmpInterfaceEntry | not-accessible | current | An entry (conceptual row) representing an interface on which IGMP is enabled. |
| 1.3.6.1.4.1.2272.1.30.15.1.1 | ColumnrcIgmpInterfaceIfIndex | read-only | current | The interface for which IGMP is enabled. |
| 1.3.6.1.4.1.2272.1.30.15.1.2 | ColumnrcIgmpInterfaceQueryInterval | read-create | current | The frequency at which IGMP Host-Query packets are transmitted on this interface. |
| 1.3.6.1.4.1.2272.1.30.15.1.3 | ColumnrcIgmpInterfaceStatus | read-create | current | The activation of a row enables IGMP on the interface. The destruction of a row disables IGMP on the interface. |
| 1.3.6.1.4.1.2272.1.30.15.1.4 | ColumnrcIgmpInterfaceVersion | read-create | current | The version of IGMP which is running on this interface. This object can be used to configure a router capable of running either value. For IGMP to function cor… |
| 1.3.6.1.4.1.2272.1.30.15.1.5 | ColumnrcIgmpInterfaceQuerier | read-only | current | The address of the IGMP Querier on the IP subnet to which this interface is attached. |
| 1.3.6.1.4.1.2272.1.30.15.1.6 | ColumnrcIgmpInterfaceQueryMaxResponseTime | read-create | current | The maximum query response time advertised in IGMPv2 queries on this interface. |
| 1.3.6.1.4.1.2272.1.30.15.1.10 | ColumnrcIgmpInterfaceWrongVersionQueries | read-only | current | The number of queries received whose IGMP version does not match rcIgmpInterfaceVersion. IGMP requires that all routers on a LAN be configured to run the same … |
| 1.3.6.1.4.1.2272.1.30.15.1.11 | ColumnrcIgmpInterfaceJoins | read-only | current | The number of times a group membership has been added on this interface; that is, the number of times an entry for this interface has been added to the Cache T… |
| 1.3.6.1.4.1.2272.1.30.15.1.14 | ColumnrcIgmpInterfaceRobustness | read-create | current | The robustness variable allows tuning for the expected packet loss on a subnet. If a subnet is expected to be lossy, the robustness Variable may be increased. … |
| 1.3.6.1.4.1.2272.1.30.15.1.15 | ColumnrcIgmpInterfaceLastMembQueryIntvl | read-create | current | The Last Member Query Interval is the Max Response Time inserted into Group-Specific Queries sent in response to Leave Group messages, and is also the amount o… |
| 1.3.6.1.4.1.2272.1.30.15.1.16 | ColumnrcIgmpInterfaceOperVersion | read-only | current | The operational version of IGMP which is running on this interface. |
| 1.3.6.1.4.1.2272.1.30.15.1.17 | ColumnrcIgmpInterfaceOtherQuerierPresentTimeout | read-only | current | A timeout interval. |
| 1.3.6.1.4.1.2272.1.30.15.1.18 | ColumnrcIgmpInterfaceSendQuery | read-create | current | IGMP send query flag. |
| 1.3.6.1.4.1.2272.1.30.16 | TablercIgmpCacheTable | not-accessible | current | The (conceptual) table listing the IP multicast groups for which there are members on a particular interface. |
| 1.3.6.1.4.1.2272.1.30.16.1 | RowrcIgmpCacheEntry | not-accessible | current | An entry (conceptual row) in the rcIgmpCacheTable. |
| 1.3.6.1.4.1.2272.1.30.16.1.1 | ColumnrcIgmpCacheAddress | not-accessible | current | The IP multicast group address for which this entry contains information. |
| 1.3.6.1.4.1.2272.1.30.16.1.2 | ColumnrcIgmpCacheIfIndex | not-accessible | current | The interface for which this entry contains information for an IP multicast group address. |
| 1.3.6.1.4.1.2272.1.30.16.1.4 | ColumnrcIgmpCacheLastReporter | read-only | current | The IP address of the source of the last membership report received for this IP Multicast group address on this interface. If no membership report has been rec… |
| 1.3.6.1.4.1.2272.1.30.16.1.6 | ColumnrcIgmpCacheExpiryTime | read-only | current | The minimum amount of time remaining before this entry will be aged out. |
| 1.3.6.1.4.1.2272.1.30.16.1.8 | ColumnrcIgmpCacheVersion1HostTimer | read-only | current | The time remaining until the local router will assume that there are no longer any IGMP version 1 members on the IP subnet attached to this interface. Upon hea… |
| 1.3.6.1.4.1.2272.1.30.17 | TablercIgmpMvrGroupTable | not-accessible | current | The (conceptual) table listing the mcast-vlan-registration groups. |
| 1.3.6.1.4.1.2272.1.30.17.1 | RowrcIgmpMvrGroupEntry | not-accessible | current | An entry (conceptual row) in the rcIgmpMvrGroupTable. |
| 1.3.6.1.4.1.2272.1.30.17.1.1 | ColumnrcIgmpMvrGroupGroupAddress | not-accessible | current | The group's multicast ip address. |
| 1.3.6.1.4.1.2272.1.30.17.1.2 | ColumnrcIgmpMvrGroupVlanId | not-accessible | current | The igmp snoop enabled vlan this group belongs to. |
| 1.3.6.1.4.1.2272.1.30.17.1.3 | ColumnrcIgmpMvrGroupIgmpVersion | read-only | current | Version of this group. |
| 1.3.6.1.4.1.2272.1.30.17.1.4 | ColumnrcIgmpMvrGroupLivingTime | read-only | current | Living time of this group. |
| 1.3.6.1.4.1.2272.1.30.18 | TablercIgmpMvrVlanTable | not-accessible | current | The (conceptual) table listing the mcast vlans in mcast-vlan-registration. |
| 1.3.6.1.4.1.2272.1.30.18.1 | RowrcIgmpMvrVlanEntry | not-accessible | current | An entry (conceptual row) in the rcIgmpMvrVlanTable. |
| 1.3.6.1.4.1.2272.1.30.18.1.1 | ColumnrcIgmpMvrVlanMvrVlanId | not-accessible | current | The id of mcast-vlan. |
| 1.3.6.1.4.1.2272.1.30.18.1.2 | ColumnrcIgmpMvrVlanMvrVlanProxy | read-only | current | working mode of this mcast-vlan, proxy or not. |
| 1.3.6.1.4.1.2272.1.30.18.1.3 | ColumnrcIgmpMvrVlanSourcePort | read-only | current | source port for this mcast-vlan. |
| 1.3.6.1.4.1.2272.1.30.18.1.4 | ColumnrcIgmpMvrVlanSourceAddress | read-only | current | querier address for the source in this mcast-vlan. |
| 1.3.6.1.4.1.2272.1.30.19 | TablercIgmpMvrReceiverTable | not-accessible | current | The (conceptual) table listing the mcast vlans and receiver vlans in mcast-vlan-registration. |
| 1.3.6.1.4.1.2272.1.30.19.1 | RowrcIgmpMvrReceiverEntry | not-accessible | current | An entry (conceptual row) in the rcIgmpMvrGroupTable. |
| 1.3.6.1.4.1.2272.1.30.19.1.1 | ColumnrcIgmpMvrReceiverVlanId | not-accessible | current | The id of receiver vlan that bound to mcast-vlan. |
| 1.3.6.1.4.1.2272.1.30.19.1.2 | ColumnrcIgmpMvrReceiverRowStatus | read-create | current | Used to create/delete entries. |
| 1.3.6.1.4.1.2272.1.30.20 | TablercIgmpAccessControlListInfoTable | not-accessible | current | The (conceptual) table listing the Name and the Port List for a specific IGMP Access Control List. |
| 1.3.6.1.4.1.2272.1.30.20.1 | RowrcIgmpAccessControlListInfoEntry | not-accessible | current | An entry (conceptual row) in the rcIgmpAccessControlListInfoTable. |
| 1.3.6.1.4.1.2272.1.30.20.1.1 | ColumnrcIgmpAccessControlListInfoACLIndex | not-accessible | current | An index value that uniquely identifies an IGMP Access Control List. |
| 1.3.6.1.4.1.2272.1.30.20.1.2 | ColumnrcIgmpAccessControlListInfoName | read-create | current | Name of the IGMP Access Control List. |
| 1.3.6.1.4.1.2272.1.30.20.1.3 | ColumnrcIgmpAccessControlListInfoPortList | read-create | current | List of ports that use this IGMP Access Control List. |
| 1.3.6.1.4.1.2272.1.30.20.1.4 | ColumnrcIgmpAccessControlListInfoRowStatus | read-create | current | Row status for this entry. |
| 1.3.6.1.4.1.2272.1.30.21 | TablercIgmpAccessControlListConditionsTable | not-accessible | current | The (conceptual) table listing the conditions (IP ranges, subnets) for each IGMP Access Control List. |
| 1.3.6.1.4.1.2272.1.30.21.1 | RowrcIgmpAccessControlListConditionsEntry | not-accessible | current | An entry (conceptual row) in the rcIgmpAccessControlListConditionsTable. |
| 1.3.6.1.4.1.2272.1.30.21.1.1 | ColumnrcIgmpAccessControlListConditionsACLIndex | not-accessible | current | An index value that uniquely identifies an IGMP Access Control List. |
| 1.3.6.1.4.1.2272.1.30.21.1.2 | ColumnrcIgmpAccessControlListConditionsIpAddrStart | not-accessible | current | This is the IP address of the subnet or the Start address of the IP range. |
| 1.3.6.1.4.1.2272.1.30.21.1.3 | ColumnrcIgmpAccessControlListConditionsIpAddrEndOrMask | not-accessible | current | This is the mask of the subnet or the End address of the IP range. |
| 1.3.6.1.4.1.2272.1.30.21.1.4 | ColumnrcIgmpAccessControlListConditionsType | read-create | current | This value specifies if the stored entry is a subnet or an IP range. |
| 1.3.6.1.4.1.2272.1.30.21.1.5 | ColumnrcIgmpAccessControlListConditionsRowStatus | read-create | current | Row status for this entry. |
| 1.3.6.1.4.1.2272.1.30.22 | TablercIgmpStaticEntriesTable | not-accessible | current | The (conceptual) table listing the IGMP static entries installed for each vlan |
| 1.3.6.1.4.1.2272.1.30.22.1 | RowrcIgmpStaticEntriesEntry | not-accessible | current | An entry (conceptual row) in the rcIgmpStaticEntriesTable. |
| 1.3.6.1.4.1.2272.1.30.22.1.1 | ColumnrcIgmpStaticEntriesVlanId | not-accessible | current | VlanId where this entry is installed. |
| 1.3.6.1.4.1.2272.1.30.22.1.2 | ColumnrcIgmpStaticEntriesGroupAddress | not-accessible | current | This is the IP address of the IGMP group that is statically allowed on this vlan and port list. |
| 1.3.6.1.4.1.2272.1.30.22.1.3 | ColumnrcIgmpStaticEntriesPortList | read-create | current | List of ports where this IGMP Static Entry is installed. |
| 1.3.6.1.4.1.2272.1.30.22.1.4 | ColumnrcIgmpStaticEntriesRowStatus | read-create | current | Row status for this entry. |
| 1.3.6.1.4.1.2272.1.30.23 | TablercIgmpGroupExtTable | not-accessible | current | The (conceptual) table listing the multicast groups configured in the device. |
| 1.3.6.1.4.1.2272.1.30.23.1 | RowrcIgmpGroupExtEntry | not-accessible | current | An entry (conceptual row) representing an Igmp group. |
| 1.3.6.1.4.1.2272.1.30.23.1.1 | ColumnrcIgmpGroupExtIpAddress | not-accessible | current | Multicast group Address (Class D) that others want to join. A group address can be the same for many incoming ports. |
| 1.3.6.1.4.1.2272.1.30.23.1.2 | ColumnrcIgmpGroupExtSourceAddress | not-accessible | current | IP Address of the source. |
| 1.3.6.1.4.1.2272.1.30.23.1.3 | ColumnrcIgmpGroupExtMembers | not-accessible | current | IP Address of a source that has sent group report wishing to join this group. |
| 1.3.6.1.4.1.2272.1.30.23.1.4 | ColumnrcIgmpGroupExtInPort | read-only | current | An unique value to identify a physical interface or a logical interface (VLAN), which has received Group reports from various sources. |
| 1.3.6.1.4.1.2272.1.30.23.1.5 | ColumnrcIgmpGroupExtExpiration | read-only | current | Time left before the group report expired on this port. Only one of this variable port. This variable is updated upon receiving a group report. |
| 1.3.6.1.4.1.2272.1.30.23.1.6 | ColumnrcIgmpGroupExtIfIndex | read-only | current | An unique value to identify a physical interface or a logical interface (VLAN), which has received Group reports from various sources. |
| 1.3.6.1.4.1.2272.1.30.23.1.7 | ColumnrcIgmpGroupExtUserId | read-only | current | User-id sending this group |
| 1.3.6.1.4.1.2272.1.30.23.1.8 | ColumnrcIgmpGroupExtMemberState | read-only | current | Used for IGAP, to indicated member state. |
| 1.3.6.1.4.1.2272.1.30.23.1.9 | ColumnrcIgmpGroupExtSessionTime | read-only | current | Used for IGAP, to indicated the session time in seconds for the member. Session time is started after traffic is available to member. It can be also called Acc… |
| 1.3.6.1.4.1.2272.1.30.23.1.10 | ColumnrcIgmpGroupExtMode | read-only | current | Address mode. |
| 1.3.6.1.4.1.2272.1.30.24 | TablercIgmpv3CacheTable | not-accessible | current | The (conceptual) table listing the Igmpv3 specific data corresponding to each interface, port and multicast group pair on a Router. |
| 1.3.6.1.4.1.2272.1.30.24.1 | RowrcIgmpv3CacheEntry | not-accessible | current | An entry (conceptual row) representing an Igmpv3 Group. |
| 1.3.6.1.4.1.2272.1.30.24.1.1 | ColumnrcIgmpv3CacheEntryGroupAddress | not-accessible | current | Multicast group Address (Class D) that others want to join. A group address can be the same for many incoming ports. |
| 1.3.6.1.4.1.2272.1.30.24.1.2 | ColumnrcIgmpv3CacheEntryIfIndex | not-accessible | current | An unique value to identify a physical interface or a logical interface (VLAN), which has received Group reports from various sources. |
| 1.3.6.1.4.1.2272.1.30.24.1.3 | ColumnrcIgmpv3CacheEntryInPort | not-accessible | current | An unique value to identify a physical interface or a logical interface (VLAN), which has received Group reports from various sources. |
| 1.3.6.1.4.1.2272.1.30.24.1.4 | ColumnrcIgmpv3CacheEntryModeExpiryTimer | read-only | current | This value is applicable only to IGMPv3-compatible nodes and represents the time remaining before the interface EXCLUDE state expires and the interface state t… |
| 1.3.6.1.4.1.2272.1.30.24.1.5 | ColumnrcIgmpv3CacheEntryVersion1HostTimer | read-only | current | The time remaining until the local router will assume that there are no longer any IGMP version 1 members on the IP subnet attached to this interface. This ent… |
| 1.3.6.1.4.1.2272.1.30.24.1.6 | ColumnrcIgmpv3CacheEntryVersion2HostTimer | read-only | current | The time remaining until the local router will assume that there are no longer any IGMP version 2 members on the IP subnet attached to this interface. Upon hea… |
| 1.3.6.1.4.1.2272.1.30.24.1.7 | ColumnrcIgmpv3CacheEntrySourceFilterMode | read-only | current | The current group state, applicable to IGMPv3-compatible nodes. The value indicates whether the state is INCLUDE or EXCLUDE. |
| 1.3.6.1.4.1.2272.1.30.25 | TablercIgmpRouterSrcListTable | not-accessible | current | The (conceptual) table listing the Source List entries corresponding to each interface and multicast group pair on a Router. |
| 1.3.6.1.4.1.2272.1.30.25.1 | RowrcIgmpRouterSrcListEntry | not-accessible | current | An entry (conceptual row) representing an Igmp Source. |
| 1.3.6.1.4.1.2272.1.30.25.1.1 | ColumnrcIgmpRouterSrcListGroupAddress | not-accessible | current | The IP multicast group address for which this entry contains information. |
| 1.3.6.1.4.1.2272.1.30.25.1.2 | ColumnrcIgmpRouterSrcListIfIndex | not-accessible | current | The interface for which this entry contains information for an IP multicast group address. |
| 1.3.6.1.4.1.2272.1.30.25.1.3 | ColumnrcIgmpRouterSrcListInPort | not-accessible | current | An unique value to identify a physical interface or a logical interface (VLAN), which has received Group reports for this source. |
| 1.3.6.1.4.1.2272.1.30.25.1.4 | ColumnrcIgmpRouterSrcListHostAddress | not-accessible | current | The host address to which this entry corresponds. |
| 1.3.6.1.4.1.2272.1.30.25.1.5 | ColumnrcIgmpRouterSrcListMemberAddress | not-accessible | current | IP Address of a member that has sent source specific report wishing to join this source. |
| 1.3.6.1.4.1.2272.1.30.25.1.6 | ColumnrcIgmpRouterSrcListExpire | read-only | current | This value indicates the relevance of the SrcList entry, whereby a non-zero value indicates this is an INCLUDE state value, and a zero value indicates this to … |
| 1.3.6.1.4.1.2272.1.30.25.1.7 | ColumnrcIgmpRouterSrcListMode | read-only | current | The current member state, applicable to IGMPv3-compatible nodes. The value indicates whether the state is INCLUDE or EXCLUDE. |
| 1.3.6.1.4.1.2272.1.30.25.1.8 | ColumnrcIgmpRouterSrcListMemberExpire | read-only | current | This value indicates the time until the member for this source will expire |
| 1.3.6.1.4.1.2272.1.30.26 | TablercIgmpNewSsmTable | not-accessible | current | |
| 1.3.6.1.4.1.2272.1.30.26.1 | RowrcIgmpNewSsmEntry | not-accessible | current | |
| 1.3.6.1.4.1.2272.1.30.26.1.1 | ColumnrcIgmpNewSsmIpMulticastGrp | not-accessible | current | This is the IP multicast group address that has default range of 232/8. This parameter should be configured by the user. |
| 1.3.6.1.4.1.2272.1.30.26.1.2 | ColumnrcIgmpNewSsmIpSource | not-accessible | current | This is the Source's IP address that will be sending traffic to the group source. This parameter should be configured by the user. |
| 1.3.6.1.4.1.2272.1.30.26.1.3 | ColumnrcIgmpNewSsmLearningMode | read-only | current | This is a read only field that provides information if the entry is statically configured entry (Static) or a dynamically learned entry from IGMPv3 (Dynamic). … |
| 1.3.6.1.4.1.2272.1.30.26.1.4 | ColumnrcIgmpNewSsmActivity | read-only | current | This is a read only field. It provides the activity on the corresponding (S,G). If the source is active and traffic is flowing to the switch, this field value … |
| 1.3.6.1.4.1.2272.1.30.26.1.5 | ColumnrcIgmpNewSsmAdminState | read-create | current | The admin state provides information on whether the entry is to be used or not. If the value of this field is Enabled (default), then the entry can be used. If… |
| 1.3.6.1.4.1.2272.1.30.26.1.6 | ColumnrcIgmpNewSsmRowStatus | read-create | current | Used to create/delete entries. |
| 1.3.6.1.4.1.2272.1.30.28 | TablercIgmpSendersTable | not-accessible | current | This table obsoletes rcIgmpSenderTable |
| 1.3.6.1.4.1.2272.1.30.28.1 | RowrcIgmpSendersEntry | not-accessible | current | |
| 1.3.6.1.4.1.2272.1.30.28.1.1 | ColumnrcIgmpSendersIfIndex | not-accessible | current | ifindex - Uniquely identifies entries in the table |
| 1.3.6.1.4.1.2272.1.30.28.1.2 | ColumnrcIgmpSendersGrpAddr | not-accessible | current | Ip multicast address of a group |
| 1.3.6.1.4.1.2272.1.30.28.1.3 | ColumnrcIgmpSendersMemberAddr | not-accessible | current | ip address of a host. |
| 1.3.6.1.4.1.2272.1.30.28.1.4 | ColumnrcIgmpSendersAction | read-write | current | none(1), flushEntry(2), flushGrp(3). It describes the IGMP Sender action. |
| 1.3.6.1.4.1.2272.1.30.28.1.5 | ColumnrcIgmpSendersTPort | read-only | current | Igmp Sender Tport. |
| 1.3.6.1.4.1.2272.1.30.28.1.6 | ColumnrcIgmpSendersState | read-only | current | Indicates if a sender exists because of an IGMP access filter or not. |
| 1.3.6.1.4.1.2272.1.30.28.1.7 | ColumnrcIgmpSendersL2Isid | read-only | current | L2 ISID of the cvlan |
| 1.3.6.1.4.1.2272.1.31 | NodercUserSetTime | |||
| 1.3.6.1.4.1.2272.1.31.1 | ScalarrcUserSetTimeYear | read-write | current | Year of the time. |
| 1.3.6.1.4.1.2272.1.31.2 | ScalarrcUserSetTimeMonth | read-write | current | Month of the time. |
| 1.3.6.1.4.1.2272.1.31.3 | ScalarrcUserSetTimeDate | read-write | current | Date of the time. |
| 1.3.6.1.4.1.2272.1.31.4 | ScalarrcUserSetTimeHour | read-write | current | Hour of the time. |
| 1.3.6.1.4.1.2272.1.31.5 | ScalarrcUserSetTimeMinute | read-write | current | Minute of the time. |
| 1.3.6.1.4.1.2272.1.31.6 | ScalarrcUserSetTimeSecond | read-write | current | Second of the time. |
| 1.3.6.1.4.1.2272.1.31.7 | ScalarrcUserSetTimeTimezone | read-write | current | Timezone values. Since + is not a valid character inside enum declaration, E(ast) and W(est) are used to indicate + and - respectively. For example, etc-GMTE1 … |
| 1.3.6.1.4.1.2272.1.32 | NodercL2Redundancy | |||
| 1.3.6.1.4.1.2272.1.32.1 | ScalarrcL2RedundancyHaCpuState | read-only | current | Indicate the Ha-CPU state. initialization - indicate the CPU is in this state. oneWayActive - Modules that need to be synchronized have registered with the fra… |
| 1.3.6.1.4.1.2272.1.32.2 | ScalarrcL2RedundancyHaEvent | read-only | current | Indicate the Ha event status. restart (0) - Causes the state machine to restart systemRegistrationDone (1)- Causes the CPU to transfer to One Way or Two Way Ac… |
| 1.3.6.1.4.1.2272.1.32.3 | ScalarrcL2RedundancyEnable | read-write | current | Indicate the feature enable/disable. |
| 1.3.6.1.4.1.2272.1.32.4 | ScalarrcL2RedundancyStandbyCpu | read-only | current | Indicate if the L2 Redundancy is enabled on the standby CPU. |
| 1.3.6.1.4.1.2272.1.33 | NodercNtp | |||
| 1.3.6.1.4.1.2272.1.33.1 | NodercNtpGlobal | |||
| 1.3.6.1.4.1.2272.1.33.1.1 | ScalarrcNtpGlobalEnable | read-write | current | Enable/disable NTP feature |
| 1.3.6.1.4.1.2272.1.33.1.2 | ScalarrcNtpGlobalInterval | read-write | current | Time interval between successive NTP updates in minutes. |
| 1.3.6.1.4.1.2272.1.33.1.3 | ScalarrcNtpGlobalManualSyncRequest | read-write | current | This object is used to force the device to immediately attempt to synchronize with the NTP servers. The value returned on a get is always requestSync(1). |
| 1.3.6.1.4.1.2272.1.33.2 | TablercNtpServerTable | not-accessible | current | The NTP server table. This table lists the information of a NTP server |
| 1.3.6.1.4.1.2272.1.33.2.1 | RowrcNtpServerEntry | not-accessible | current | A NTP server table entry. |
| 1.3.6.1.4.1.2272.1.33.2.1.1 | ColumnrcNtpServerAddress | read-only | current | Server IP address of NTP time source referred to in this table entry. |
| 1.3.6.1.4.1.2272.1.33.2.1.2 | ColumnrcNtpServerEnable | read-write | current | Enable or disable this server for participation in time update. |
| 1.3.6.1.4.1.2272.1.33.2.1.3 | ColumnrcNtpServerAuthentication | read-write | current | Enable or disable the MD5 Authentication on this serve. |
| 1.3.6.1.4.1.2272.1.33.2.1.4 | ColumnrcNtpServerKeyId | read-write | current | Public Key used to generate MD5 digest for this server. |
| 1.3.6.1.4.1.2272.1.33.2.1.5 | ColumnrcNtpServerAccessAttempts | read-only | current | The number of NTP requests sent to this server |
| 1.3.6.1.4.1.2272.1.33.2.1.6 | ColumnrcNtpServerAccessSuccess | read-only | current | The number of times this server was selected to update the time |
| 1.3.6.1.4.1.2272.1.33.2.1.7 | ColumnrcNtpServerAccessFailure | read-only | current | The number of times this server was rejected from updating the time |
| 1.3.6.1.4.1.2272.1.33.2.1.8 | ColumnrcNtpServerRowStatus | read-write | current | Used to create/delete entries. |
| 1.3.6.1.4.1.2272.1.33.2.1.9 | ColumnrcNtpServerStratum | read-only | current | Stratum of this server |
| 1.3.6.1.4.1.2272.1.33.2.1.10 | ColumnrcNtpServerVersion | read-only | current | NTP version of this server |
| 1.3.6.1.4.1.2272.1.33.2.1.11 | ColumnrcNtpServerRootDelay | read-only | current | Root Delay of this server |
| 1.3.6.1.4.1.2272.1.33.2.1.12 | ColumnrcNtpServerPrecision | read-only | current | NTP precision of this server in seconds |
| 1.3.6.1.4.1.2272.1.33.2.1.13 | ColumnrcNtpServerReachable | read-only | current | NTP Reachability of this server |
| 1.3.6.1.4.1.2272.1.33.2.1.14 | ColumnrcNtpServerSynchronized | read-only | current | Status of synchronization with this server |
| 1.3.6.1.4.1.2272.1.33.2.1.15 | ColumnrcNtpServerSourceIpAddr | read-write | current | source IP address for NTP packets. |
| 1.3.6.1.4.1.2272.1.33.3 | TablercNtpKeyTable | not-accessible | current | The NTP key table. This table lists the private key of the public key Id |
| 1.3.6.1.4.1.2272.1.33.3.1 | RowrcNtpKeyEntry | not-accessible | current | A NTP key table entry. |
| 1.3.6.1.4.1.2272.1.33.3.1.1 | ColumnrcNtpKeyId | read-only | current | Public Key used to generate MD5/SHA1 digest |
| 1.3.6.1.4.1.2272.1.33.3.1.2 | ColumnrcNtpKeySecret | read-write | current | Private Key used to generate MD5/SHA1 Digest |
| 1.3.6.1.4.1.2272.1.33.3.1.3 | ColumnrcNtpKeyRowStatus | read-write | current | Used to create/delete entries. |
| 1.3.6.1.4.1.2272.1.33.3.1.4 | ColumnrcNtpKeyType | read-write | current | Key type: MD5 or SHA1 |
| 1.3.6.1.4.1.2272.1.34 | NodercSsh | |||
| 1.3.6.1.4.1.2272.1.34.1 | NodercSshGlobal | |||
| 1.3.6.1.4.1.2272.1.34.1.1 | ScalarrcSshGlobalVersion | read-write | current | SSH version |
| 1.3.6.1.4.1.2272.1.34.1.2 | ScalarrcSshGlobalPort | read-write | current | SSH connection port. |
| 1.3.6.1.4.1.2272.1.34.1.3 | ScalarrcSshGlobalMaxSession | read-write | current | Number of session allowed. |
| 1.3.6.1.4.1.2272.1.34.1.4 | ScalarrcSshGlobalTimeout | read-write | current | SSH connection timeout in seconds. |
| 1.3.6.1.4.1.2272.1.34.1.5 | ScalarrcSshGlobalRsaKeySize | read-write | current | SSH Rsa key size. |
| 1.3.6.1.4.1.2272.1.34.1.6 | ScalarrcSshGlobalDsaKeySize | read-write | current | SSH Dsa key size. |
| 1.3.6.1.4.1.2272.1.34.1.7 | ScalarrcSshGlobalRsaAuth | read-write | current | Enable/disable SSH RSA authentication |
| 1.3.6.1.4.1.2272.1.34.1.8 | ScalarrcSshGlobalDsaAuth | read-write | current | Enable/disable SSH DSA authentication |
| 1.3.6.1.4.1.2272.1.34.1.9 | ScalarrcSshGlobalPassAuth | read-write | current | Enable/disable SSH RSA authentication |
| 1.3.6.1.4.1.2272.1.34.1.10 | ScalarrcSshGlobalKeyAction | read-write | current | SSH key action. |
| 1.3.6.1.4.1.2272.1.34.1.11 | ScalarrcSshGlobalEnable | read-write | current | Enable/disable, or securely enable SSH. Securely enable turns off other daemon flag, and it takes ffect afte reboot |
| 1.3.6.1.4.1.2272.1.34.1.12 | ScalarrcSshGlobalHostIpAddr | read-write | current | current remote ip addr |
| 1.3.6.1.4.1.2272.1.34.1.13 | ScalarrcSshGlobalRetries | read-write | current | Number of SSH retries allowed. |
| 1.3.6.1.4.1.2272.1.34.1.14 | ScalarrcSshGlobalDsaAuthKeyName | read-only | current | Name of the DSA Auth Key. When not used, the value is a zero length string. |
| 1.3.6.1.4.1.2272.1.34.1.15 | ScalarrcSshGlobalRsaAuthKeyName | read-only | current | Name of the RSA Auth Key. When not used, the value is a zero length string. |
| 1.3.6.1.4.1.2272.1.34.1.16 | ScalarrcSshGlobalRekeyEnable | read-write | current | Enable/disable SSH Rekey. This needs global SSH flag to be enabled |
| 1.3.6.1.4.1.2272.1.34.1.17 | ScalarrcSshGlobalRekeyTimeInterval | read-write | current | Time interval in hours after which active SSH sessions should start the rekey process. |
| 1.3.6.1.4.1.2272.1.34.1.18 | ScalarrcSshGlobalRekeyDataLimit | read-write | current | Total data(in GB) Tx and Rx in active SSH sessions after which sessions should start the rekey process. |
| 1.3.6.1.4.1.2272.1.34.1.19 | ScalarrcSshGlobalSftpEnable | read-write | current | Enable/disable SSH Sftp. |
| 1.3.6.1.4.1.2272.1.34.1.20 | ScalarrcSshGlobalKeyboardInteractiveAuth | read-write | current | Enable/disable SSH keyboard-interactive mode authentication |
| 1.3.6.1.4.1.2272.1.34.1.21 | ScalarrcSshAuthType | read-write | current | value is one of multiple (logically by 'OR' of following value: bit 0 - hmac_sha1 bit 1 - aead_aes_128_gcm_ssh bit 2 - aead_aes_256_gcm_ssh bit 3 - hmac_sha2_2… |
| 1.3.6.1.4.1.2272.1.34.1.22 | ScalarrcSshEncryptionType | read-write | current | value is one of multiple (logically by 'OR' of following value: bit 0 - aes128_cbc bit 1 - aes256_cbc bit 2 - threedes_cbc bit 3 - aead_aes_128_gcm_ssh bit 4 -… |
| 1.3.6.1.4.1.2272.1.34.1.23 | ScalarrcSshKeyExchangeMethod | read-write | current | value is one of multiple (logically by 'OR' of following value: bit 0 - diffie_hellman_group14_sha1 bit 1 - diffie_hellman_group1_sha1 diffie_hellman_group14_s… |
| 1.3.6.1.4.1.2272.1.34.1.24 | ScalarrcSshGlobalClientEnable | read-write | current | Enable/disable SSH Client. |
| 1.3.6.1.4.1.2272.1.34.2 | TablercSslMipTable | not-accessible | current | This table would display the MIP of the SSL blade according to the slot number. |
| 1.3.6.1.4.1.2272.1.34.2.1 | RowrcSslMipTableEntry | not-accessible | current | This table get the MIP of the SSL blade on which the blade is in different cluster. |
| 1.3.6.1.4.1.2272.1.34.2.1.1 | ColumnrcSslMipSlot | read-only | current | Used as an index to find out the MIP of SSL blade. |
| 1.3.6.1.4.1.2272.1.34.2.1.2 | ColumnrcSslMipMip | read-only | current | Master IP of the SSL blade. |
| 1.3.6.1.4.1.2272.1.34.3 | NodercSshcGlobal | |||
| 1.3.6.1.4.1.2272.1.34.3.1 | ScalarrcSshcGlobalActiveSessions | read-only | deprecated | Number of SSHC active sessions |
| 1.3.6.1.4.1.2272.1.34.3.2 | ScalarrcSshcGlobalPort | read-write | current | SSHC connection port. |
| 1.3.6.1.4.1.2272.1.34.3.3 | ScalarrcSshcGlobalAuthenticationTimeout | read-write | deprecated | Authentication timeout in seconds. |
| 1.3.6.1.4.1.2272.1.34.3.4 | ScalarrcSshcGlobalDsaAuthentication | read-write | current | Authentication using DSA. |
| 1.3.6.1.4.1.2272.1.34.3.5 | ScalarrcSshcGlobalPasswordAuthentication | read-write | current | Authentication using password. |
| 1.3.6.1.4.1.2272.1.34.3.6 | ScalarrcSshcGlobalUserName | read-write | current | User name. |
| 1.3.6.1.4.1.2272.1.34.3.7 | ScalarrcSshcGlobalSftpServerAddress | read-write | deprecated | SFTP server IPv4 address. |
| 1.3.6.1.4.1.2272.1.34.3.8 | ScalarrcSshcGlobalDsaKeySize | read-write | current | Size of the SSH Client DSA key. Must be a multiple of 64. |
| 1.3.6.1.4.1.2272.1.34.3.9 | ScalarrcSshcGlobalRsaKeySize | read-write | current | SSH Client RSA key size. Must be a multiple of 128. |
| 1.3.6.1.4.1.2272.1.34.3.10 | ScalarrcSshcGlobalRsaAuth | read-write | deprecated | Enable/disable SSH Client RSA authentication |
| 1.3.6.1.4.1.2272.1.34.3.11 | ScalarrcSshcGlobalDsaAuth | read-write | deprecated | Enable/disable SSH Client DSA authentication |
| 1.3.6.1.4.1.2272.1.34.3.12 | ScalarrcSshcGlobalPassAuth | read-write | deprecated | Enable/disable SSH Client password authentication |
| 1.3.6.1.4.1.2272.1.34.3.13 | ScalarrcSshcGlobalKeyAction | read-write | current | SSH Client key action. The actions generateDsa(1) and generateRsa(2) initiate the generation of the DSA key or RSA key if the key is not already generated. del… |
| 1.3.6.1.4.1.2272.1.34.3.14 | ScalarrcSshcGlobalDsaHostKeyStatus | read-only | current | This object indicates the current status of the SSH DSA host key. If the DSA host key has not yet been generated, the value will be notGenerated(1). If it has … |
| 1.3.6.1.4.1.2272.1.34.3.15 | ScalarrcSshcGlobalRsaHostKeyStatus | read-only | current | This object indicates the current status of the SSH RSA host key. If the RSA host key has not yet been generated, the value will be notGenerated(1). If it has … |
| 1.3.6.1.4.1.2272.1.34.3.16 | ScalarrcSshcGlobalTftpAction | read-write | current | This object may be set to initiate a TFTP upload of SSH Client public keys. When retrieved, the value will alwa ys be none(1). |
| 1.3.6.1.4.1.2272.1.34.3.17 | ScalarrcSshcGlobalUsbAction | read-write | current | This object may be set to initiate a USB upload of SSH Client public keys. When retrieved, the value will alwa ys be none(1). |
| 1.3.6.1.4.1.2272.1.34.3.18 | ScalarrcSshcGlobalKeyFileName | read-write | current | Name of the key file on the TFTP server or USB where the key is uploaded |
| 1.3.6.1.4.1.2272.1.34.3.19 | ScalarrcSshcGlobalRsaAuthenthication | read-write | current | Set to true to use RSA authentication to the SFTP server. When toggling the value from true to false the default authentication method (DSA key) will be activa… |
| 1.3.6.1.4.1.2272.1.34.3.20 | ScalarrcSshcGlobalSftpServerPassword | read-write | current | The password used for SFTP authentication |
| 1.3.6.1.4.1.2272.1.34.3.21 | ScalarrcSshcGlobalSftpServerInetAddressType | read-write | current | SFTP server IP address type. |
| 1.3.6.1.4.1.2272.1.34.3.22 | ScalarrcSshcGlobalSftpServerInetAddress | read-write | current | SFTP server IP address. |
| 1.3.6.1.4.1.2272.1.35 | NodercSvlan | |||
| 1.3.6.1.4.1.2272.1.35.1 | NodercSvlanGlobal | |||
| 1.3.6.1.4.1.2272.1.35.1.1 | ScalarrcSvlanActiveLevel | read-write | current | Stacked Vlan active level. |
| 1.3.6.1.4.1.2272.1.35.2 | TablercSvlanTable | not-accessible | current | A list of possible levels and their corresponding ether type. The number of entries is eight. |
| 1.3.6.1.4.1.2272.1.35.2.1 | RowrcSvlanEntry | not-accessible | current | A Stacked Vlan table entry. |
| 1.3.6.1.4.1.2272.1.35.2.1.1 | ColumnrcSvlanId | read-only | current | Row Index. |
| 1.3.6.1.4.1.2272.1.35.2.1.2 | ColumnrcSvlanLevel | read-only | current | A value that identifies the switch level associated with this entry. |
| 1.3.6.1.4.1.2272.1.35.2.1.3 | ColumnrcSvlanEtherType | read-write | current | The ether type value is used for svlan tagging. |
| 1.3.6.1.4.1.2272.1.36 | NodercOpm | |||
| 1.3.6.1.4.1.2272.1.37 | NodercVpn | |||
| 1.3.6.1.4.1.2272.1.38 | NodercOeAdm | |||
| 1.3.6.1.4.1.2272.1.39 | NodercTlsVpn | |||
| 1.3.6.1.4.1.2272.1.40 | NodercTls | |||
| 1.3.6.1.4.1.2272.1.41 | NodercCos | |||
| 1.3.6.1.4.1.2272.1.42 | NodercBanRing | |||
| 1.3.6.1.4.1.2272.1.43 | NodercRing | |||
| 1.3.6.1.4.1.2272.1.50 | NodercTengEnet | |||
| 1.3.6.1.4.1.2272.1.50.1 | NodercTengEnetStats | |||
| 1.3.6.1.4.1.2272.1.50.1.1 | TablercTengDot3StatsTable | not-accessible | current | Statistics for a collection of ethernet-like interfaces attached to a particular system. |
| 1.3.6.1.4.1.2272.1.50.1.1.1 | RowrcTengDot3StatsEntry | not-accessible | current | Statistics for a particular interface to an ethernet-like medium. |
| 1.3.6.1.4.1.2272.1.50.1.1.1.1 | ColumnrcTengDot3StatsIndex | read-only | current | An index value that uniquely identifies an interface to an ethernet-like medium. The interface identified by a particular value of this index is the same inter… |
| 1.3.6.1.4.1.2272.1.50.1.1.1.2 | ColumnrcTengDot3StatsAlignmentErrors | read-only | current | A count of frames received on a particular interface that are not an integral number of octets in length and do not pass the FCS check. The count represented b… |
| 1.3.6.1.4.1.2272.1.50.1.1.1.3 | ColumnrcTengDot3StatsFCSErrors | read-only | current | A count of frames received on a particular interface that are an integral number of octets in length but do not pass the FCS check. The count represented by an… |
| 1.3.6.1.4.1.2272.1.50.1.1.1.4 | ColumnrcTengDot3StatsSingleCollisionFrames | read-only | current | A count of successfully transmitted frames on a particular interface for which transmission is inhibited by exactly one collision. A frame that is counted by a… |
| 1.3.6.1.4.1.2272.1.50.1.1.1.5 | ColumnrcTengDot3StatsMultipleCollisionFrames | read-only | current | A count of successfully transmitted frames on a particular interface for which transmission is inhibited by more than one collision. A frame that is counted by… |
| 1.3.6.1.4.1.2272.1.50.1.1.1.6 | ColumnrcTengDot3StatsSQETestErrors | read-only | current | A count of times that the SQE TEST ERROR message is generated by the PLS sublayer for a particular interface. The SQE TEST ERROR message is defined in section … |
| 1.3.6.1.4.1.2272.1.50.1.1.1.7 | ColumnrcTengDot3StatsDeferredTransmissions | read-only | current | A count of frames for which the first transmission attempt on a particular interface is delayed because the medium is busy. The count represented by an instanc… |
| 1.3.6.1.4.1.2272.1.50.1.1.1.8 | ColumnrcTengDot3StatsLateCollisions | read-only | current | The number of times that a collision is detected on a particular interface later than 512 bit-times into the transmission of a packet. Five hundred and twelve … |
| 1.3.6.1.4.1.2272.1.50.1.1.1.9 | ColumnrcTengDot3StatsExcessiveCollisions | read-only | current | A count of frames for which transmission on a particular interface fails due to excessive collisions. |
| 1.3.6.1.4.1.2272.1.50.1.1.1.10 | ColumnrcTengDot3StatsInternalMacTransmitErrors | read-only | current | A count of frames for which transmission on a particular interface fails due to an internal MAC sublayer transmit error. A frame is only counted by an instance… |
| 1.3.6.1.4.1.2272.1.50.1.1.1.11 | ColumnrcTengDot3StatsCarrierSenseErrors | read-only | current | The number of times that the carrier sense condition was lost or never asserted when attempting to transmit a frame on a particular interface. The count repres… |
| 1.3.6.1.4.1.2272.1.50.1.1.1.13 | ColumnrcTengDot3StatsFrameTooLongs | read-only | current | A count of frames received on a particular interface that exceed the maximum permitted frame size. The count represented by an instance of this object is incre… |
| 1.3.6.1.4.1.2272.1.50.1.1.1.16 | ColumnrcTengDot3StatsInternalMacReceiveErrors | read-only | current | A count of frames for which reception on a particular interface fails due to an internal MAC sublayer receive error. A frame is only counted by an instance of … |
| 1.3.6.1.4.1.2272.1.50.1.1.1.17 | ColumnrcTengDot3StatsEtherChipSet | read-only | current | This object contains an OBJECT IDENTIFIER which identifies the chipset used to realize the interface. Ethernet-like interfaces are typically built out of sever… |
| 1.3.6.1.4.1.2272.1.50.1.1.1.18 | ColumnrcTengDot3StatsLinkFailures | read-only | current | The total number of link failures enCounter32ed on this interface. |
| 1.3.6.1.4.1.2272.1.50.1.1.1.19 | ColumnrcTengDot3StatsPacketErrors | read-only | current | The total number of packet errors enCounter32ed on this interface. |
| 1.3.6.1.4.1.2272.1.50.1.1.1.20 | ColumnrcTengDot3StatsCarrierErrors | read-only | current | The total number of carrier errors enCounter32ed on this interface. |
| 1.3.6.1.4.1.2272.1.50.1.1.1.21 | ColumnrcTengDot3StatsLinkInactiveErrors | read-only | current | The total number of link inactive errors enCounter32ed on this interface. |
| 1.3.6.1.4.1.2272.1.50.1.1.1.22 | ColumnrcTengDot3StatsInFlowCtrlPkts | read-only | current | The total number of flow control packets received by this interface. |
| 1.3.6.1.4.1.2272.1.50.1.1.1.23 | ColumnrcTengDot3StatsOutFlowCtrlPkts | read-only | current | The total number of flow control packets transmitted by this interface. |
| 1.3.6.1.4.1.2272.1.50.1.1.1.24 | ColumnrcTengDot3StatsFrameTooShorts | read-only | current | The total number of frames that are too short that were enCounter32ed on this interface. |
| 1.3.6.1.4.1.2272.1.50.1.1.1.26 | ColumnrcTengDot3StatsInPfcPkts | read-only | current | The total number of Priority Flow Control (PFC) packets received by this interface. |
| 1.3.6.1.4.1.2272.1.50.1.1.1.27 | ColumnrcTengDot3StatsOutPfcPkts | read-only | current | The total number of Priority Flow Control (PFC) packets transmitted by this interface. |
| 1.3.6.1.4.1.2272.1.50.1.1.1.28 | ColumnrcTengDot3StatsFramesBad | read-only | current | The total number of bad frames |
| 1.3.6.1.4.1.2272.1.50.1.1.1.29 | ColumnrcTengDot3StatsFragmentErrors | read-only | current | The total number of fragment errors |
| 1.3.6.1.4.1.2272.1.50.1.1.1.30 | ColumnrcTengDot3StatsLongJabberErrors | read-only | current | The total number of long jabber errors |
| 1.3.6.1.4.1.2272.1.50.1.1.1.31 | ColumnrcTengDot3StatsDefaultDrops | read-only | current | The total number of default drops |
| 1.3.6.1.4.1.2272.1.50.1.1.1.32 | ColumnrcTengDot3StatsIllegalLenError | read-only | current | The total number of illegal length error |
| 1.3.6.1.4.1.2272.1.50.1.1.1.33 | ColumnrcTengDot3StatsMismatchError | read-only | current | The total number of mismatch error |
| 1.3.6.1.4.1.2272.1.50.1.1.1.34 | ColumnrcTengDot3StatsOutOfRangeError | read-only | current | The total number of out of range error |
| 1.3.6.1.4.1.2272.1.50.1.1.1.35 | ColumnrcTengDot3StatsOversize | read-only | current | The total number of oversize |
| 1.3.6.1.4.1.2272.1.50.1.1.1.36 | ColumnrcTengDot3StatsDataErrors | read-only | current | The total number of data errors |
| 1.3.6.1.4.1.2272.1.50.1.1.1.37 | ColumnrcTengDot3StatsJabberErrors | read-only | current | The total number of jabbber errors |
| 1.3.6.1.4.1.2272.1.50.1.2 | TablercTengStatTable | not-accessible | current | A table used to store port statistics. |
| 1.3.6.1.4.1.2272.1.50.1.2.1 | RowrcTengStatEntry | not-accessible | current | interface Counter32s |
| 1.3.6.1.4.1.2272.1.50.1.2.1.1 | ColumnrcTengStatIndex | read-only | current | An index value that uniquely identifies a port. This value is similar to ifIndex in MIB2. |
| 1.3.6.1.4.1.2272.1.50.1.2.1.2 | ColumnrcTengStatBridgeInUnicastFrames | read-only | current | The total number of incoming unicast frames that were bridged. |
| 1.3.6.1.4.1.2272.1.50.1.2.1.3 | ColumnrcTengStatBridgeInMulticastFrames | read-only | current | The total number of incoming multicast frames that were bridged. |
| 1.3.6.1.4.1.2272.1.50.1.2.1.4 | ColumnrcTengStatBridgeInBroadcastFrames | read-only | current | The total number of incoming broadcast frames that were bridged. |
| 1.3.6.1.4.1.2272.1.50.1.2.1.5 | ColumnrcTengStatBridgeInDiscards | read-only | current | The total number of frames that were discarded by the bridging entity. |
| 1.3.6.1.4.1.2272.1.50.1.2.1.6 | ColumnrcTengStatBridgeOutUnicastFrames | read-only | current | The total number of outgoing unicast frames that were bridged. |
| 1.3.6.1.4.1.2272.1.50.1.2.1.7 | ColumnrcTengStatBridgeOutMulticastFrames | read-only | current | The total number of outgoing multicast frames that were bridged. |
| 1.3.6.1.4.1.2272.1.50.1.2.1.8 | ColumnrcTengStatBridgeOutBroadcastFrames | read-only | current | The total number of outgoing broadcast frames that were bridged. |
| 1.3.6.1.4.1.2272.1.50.1.2.1.9 | ColumnrcTengStatRouteInUnicastFrames | read-only | current | The total number of incoming unicast frames that were routed. |
| 1.3.6.1.4.1.2272.1.50.1.2.1.10 | ColumnrcTengStatRouteInMulticastFrames | read-only | current | The total number of incoming multicast frames that were routed. |
| 1.3.6.1.4.1.2272.1.50.1.2.1.11 | ColumnrcTengStatRouteInDiscards | read-only | current | The total number of frames that were discarded by the routing entity. |
| 1.3.6.1.4.1.2272.1.50.1.2.1.12 | ColumnrcTengStatRouteOutUnicastFrames | read-only | current | The total number of outgoing unicast frames that were routed. |
| 1.3.6.1.4.1.2272.1.50.1.2.1.13 | ColumnrcTengStatRouteOutMulticastFrames | read-only | current | The total number of outgoing multicast frames that were routed. |
| 1.3.6.1.4.1.2272.1.50.1.2.1.14 | ColumnrcTengStatStgForwardTransitions | read-only | current | The number of times this port has transitioned from the Learning state to the Forwarding state. |
| 1.3.6.1.4.1.2272.1.50.1.2.1.15 | ColumnrcTengStatStgInConfigBpdus | read-only | current | |
| 1.3.6.1.4.1.2272.1.50.1.2.1.16 | ColumnrcTengStatStgInTcnBpdus | read-only | current | |
| 1.3.6.1.4.1.2272.1.50.1.2.1.17 | ColumnrcTengStatStgInBadBpdus | read-only | current | |
| 1.3.6.1.4.1.2272.1.50.1.2.1.18 | ColumnrcTengStatStgOutConfigBpdus | read-only | current | |
| 1.3.6.1.4.1.2272.1.50.1.2.1.19 | ColumnrcTengStatStgOutTcnBpdus | read-only | current | |
| 1.3.6.1.4.1.2272.1.50.1.2.1.20 | ColumnrcTengStatBridgeOutFrames | read-only | current | Used by the Accelar 8000 product family to account for all transmitted bridge unicast, broadcast, and multicast packets. The individual Counter32s are not supp… |
| 1.3.6.1.4.1.2272.1.50.1.3 | TablercTengIfTable | not-accessible | current | A list of interface entries. The number of entries is given by the value of engIfNumber. |
| 1.3.6.1.4.1.2272.1.50.1.3.1 | RowrcTengIfEntry | not-accessible | current | An entry containing management information applicable to a particular interface. |
| 1.3.6.1.4.1.2272.1.50.1.3.1.1 | ColumnrcTengIfIndex | read-only | current | A unique value, greater than zero, for each interface. It is recommended that values are assigned contiguously starting from 1. The value for each interface su… |
| 1.3.6.1.4.1.2272.1.50.1.3.1.2 | ColumnrcTengIfDescr | read-only | current | A textual string containing information about the interface. This string should include the name of the manufacturer, the product name and the version of the i… |
| 1.3.6.1.4.1.2272.1.50.1.3.1.3 | ColumnrcTengIfType | read-only | current | The type of interface. Additional values for IfType are assigned by the Internet Assigned Numbers Authority (IANA), through updating the syntax of the IANAifTy… |
| 1.3.6.1.4.1.2272.1.50.1.3.1.4 | ColumnrcTengIfMtu | read-only | current | The size of the largest packet which can be sent/received on the interface, specified in octets. For interfaces that are used for transmitting network datagram… |
| 1.3.6.1.4.1.2272.1.50.1.3.1.5 | ColumnrcTengIfSpeed | read-only | current | An estimate of the interface's current bandwidth in bits per second. For interfaces which do not vary in bandwidth or for those where no accurate estimation ca… |
| 1.3.6.1.4.1.2272.1.50.1.3.1.6 | ColumnrcTengIfPhysAddress | read-only | current | The interface's address at its protocol sub-layer. The interface's media-specific MIB must define the bit and byte ordering and format of the value contained b… |
| 1.3.6.1.4.1.2272.1.50.1.3.1.7 | ColumnrcTengIfAdminStatus | read-write | current | The desired state of the interface. The testing(3) state indicates that no operational packets can be passed. When a managed system initializes, all interfaces… |
| 1.3.6.1.4.1.2272.1.50.1.3.1.8 | ColumnrcTengIfOperStatus | read-only | current | The current operational state of the interface. The testing(3) state indicates that no operational packets can be passed. If IfAdminStatus is down(2) then IfOp… |
| 1.3.6.1.4.1.2272.1.50.1.3.1.9 | ColumnrcTengIfLastChange | read-only | current | The value of sysUpTime at the time the interface entered its current operational state. If the current state was entered prior to the last re-initialization of… |
| 1.3.6.1.4.1.2272.1.50.1.3.1.10 | ColumnrcTengIfInOctets | read-only | current | The total number of octets received on the interface, including framing characters. |
| 1.3.6.1.4.1.2272.1.50.1.3.1.11 | ColumnrcTengIfInUcastPkts | read-only | current | The number of packets, delivered by this sub-layer to a higher (sub-)layer, which were not addressed to a multicast or broadcast address at this sub-layer. |
| 1.3.6.1.4.1.2272.1.50.1.3.1.12 | ColumnrcTengIfInNUcastPkts | read-only | obsolete | The number of packets, delivered by this sub-layer to a higher (sub-)layer, which were addressed to a multicast or broadcast address at this sub-layer. This ob… |
| 1.3.6.1.4.1.2272.1.50.1.3.1.13 | ColumnrcTengIfInDiscards | read-only | current | The number of inbound packets which were chosen to be discarded even though no errors had been detected to prevent their being deliverable to a higher-layer pr… |
| 1.3.6.1.4.1.2272.1.50.1.3.1.14 | ColumnrcTengIfInErrors | read-only | current | For packet-oriented interfaces, the number of inbound packets that contained errors preventing them from being deliverable to a higher-layer protocol. For char… |
| 1.3.6.1.4.1.2272.1.50.1.3.1.15 | ColumnrcTengIfInUnknownProtos | read-only | current | For packet-oriented interfaces, the number of packets received via the interface which were discarded because of an unknown or unsupported protocol. For charac… |
| 1.3.6.1.4.1.2272.1.50.1.3.1.16 | ColumnrcTengIfOutOctets | read-only | current | The total number of octets transmitted out of the interface, including framing characters. |
| 1.3.6.1.4.1.2272.1.50.1.3.1.17 | ColumnrcTengIfOutUcastPkts | read-only | current | The total number of packets that higher-level protocols requested be transmitted, and which were not addressed to a multicast or broadcast address at this sub-… |
| 1.3.6.1.4.1.2272.1.50.1.3.1.18 | ColumnrcTengIfOutNUcastPkts | read-only | obsolete | The total number of packets that higher-level protocols requested be transmitted, and which were addressed to a multicast or broadcast address at this sub-laye… |
| 1.3.6.1.4.1.2272.1.50.1.3.1.19 | ColumnrcTengIfOutDiscards | read-only | current | The number of outbound packets which were chosen to be discarded even though no errors had been detected to prevent their being transmitted. One possible reaso… |
| 1.3.6.1.4.1.2272.1.50.1.3.1.20 | ColumnrcTengIfOutErrors | read-only | current | For packet-oriented interfaces, the number of outbound packets that could not be transmitted because of errors. For character-oriented or fixed-length interfac… |
| 1.3.6.1.4.1.2272.1.50.1.3.1.21 | ColumnrcTengIfOutQLen | read-only | obsolete | The length of the output packet queue (in packets). |
| 1.3.6.1.4.1.2272.1.50.1.3.1.22 | ColumnrcTengIfSpecific | read-only | obsolete | A reference to MIB definitions specific to the particular media being used to realize the interface. It is recommended that this value point to an instance of … |
| 1.3.6.1.4.1.2272.1.50.1.4 | TablercTengIfXTable | not-accessible | current | A list of interface entries. The number of entries is given by the value of ifNumber. This table contains additional objects for the interface table. |
| 1.3.6.1.4.1.2272.1.50.1.4.1 | RowrcTengIfXEntry | not-accessible | current | An entry containing additional management information applicable to a particular interface. |
| 1.3.6.1.4.1.2272.1.50.1.4.1.1 | ColumnrcTengIfXIndex | read-only | current | A unique value, greater than zero, for each interface. It is recommended that values are assigned contiguously starting from 1. The value for each interface su… |
| 1.3.6.1.4.1.2272.1.50.1.4.1.2 | ColumnrcTengIfName | read-only | current | The textual name of the interface. The value of this object should be the name of the interface as assigned by the local device and should be suitable for use … |
| 1.3.6.1.4.1.2272.1.50.1.4.1.3 | ColumnrcTengIfInMulticastPkts | read-only | current | The number of packets, delivered by this sub-layer to a higher (sub-)layer, which were addressed to a multicast address at this sub-layer. For a MAC layer prot… |
| 1.3.6.1.4.1.2272.1.50.1.4.1.4 | ColumnrcTengIfInBroadcastPkts | read-only | current | The number of packets, delivered by this sub-layer to a higher (sub-)layer, which were addressed to a broadcast address at this sub-layer. |
| 1.3.6.1.4.1.2272.1.50.1.4.1.5 | ColumnrcTengIfOutMulticastPkts | read-only | current | The total number of packets that higher-level protocols requested be transmitted, and which were addressed to a multicast address at this sub-layer, including … |
| 1.3.6.1.4.1.2272.1.50.1.4.1.6 | ColumnrcTengIfOutBroadcastPkts | read-only | current | The total number of packets that higher-level protocols requested be transmitted, and which were addressed to a broadcast address at this sub-layer, including … |
| 1.3.6.1.4.1.2272.1.50.1.4.1.7 | ColumnrcTengIfHCInOctets | read-only | current | The total number of octets received on the interface, including framing characters. This object is a 64-bit version of rcTengIfInOctets. |
| 1.3.6.1.4.1.2272.1.50.1.4.1.8 | ColumnrcTengIfHCInUcastPkts | read-only | current | The number of packets, delivered by this sub-layer to a higher (sub-)layer, which were not addressed to a multicast or broadcast address at this sub-layer. Thi… |
| 1.3.6.1.4.1.2272.1.50.1.4.1.9 | ColumnrcTengIfHCInMulticastPkts | read-only | current | The number of packets, delivered by this sub-layer to a higher (sub-)layer, which were addressed to a multicast address at this sub-layer. For a MAC layer prot… |
| 1.3.6.1.4.1.2272.1.50.1.4.1.10 | ColumnrcTengIfHCInBroadcastPkts | read-only | current | The number of packets, delivered by this sub-layer to a higher (sub-)layer, which were addressed to a broadcast address at this sub-layer. This object is a 64-… |
| 1.3.6.1.4.1.2272.1.50.1.4.1.11 | ColumnrcTengIfHCOutOctets | read-only | current | The total number of octets transmitted out of the interface, including framing characters. This object is a 64-bit version of rcTengIfOutOctets. |
| 1.3.6.1.4.1.2272.1.50.1.4.1.12 | ColumnrcTengIfHCOutUcastPkts | read-only | current | The total number of packets that higher-level protocols requested be transmitted, and which were not addressed to a multicast or broadcast address at this sub-… |
| 1.3.6.1.4.1.2272.1.50.1.4.1.13 | ColumnrcTengIfHCOutMulticastPkts | read-only | current | The total number of packets that higher-level protocols requested be transmitted, and which were addressed to a multicast address at this sub-layer, including … |
| 1.3.6.1.4.1.2272.1.50.1.4.1.14 | ColumnrcTengIfHCOutBroadcastPkts | read-only | current | The total number of packets that higher-level protocols requested be transmitted, and which were addressed to a broadcast address at this sub-layer, including … |
| 1.3.6.1.4.1.2272.1.50.1.4.1.15 | ColumnrcTengIfLinkUpDownTrapEnable | read-write | current | Indicates whether linkUp/linkDown traps should be generated for this interface. By default, this object should have the value enabled(1) for interfaces which d… |
| 1.3.6.1.4.1.2272.1.50.1.4.1.16 | ColumnrcTengIfHighSpeed | read-only | current | An estimate of the interface's current bandwidth in units of 1,000,000 bits per second. If this object reports a value of `n' then the speed of the interface i… |
| 1.3.6.1.4.1.2272.1.50.1.4.1.17 | ColumnrcTengIfPromiscuousMode | read-write | current | This object has a value of false(2) If this interface only accepts packets/frames that are addressed to this station. This object has a value of true(1) when t… |
| 1.3.6.1.4.1.2272.1.50.1.4.1.18 | ColumnrcTengIfConnectorPresent | read-only | current | This object has the value 'true(1)' if the interface sublayer has a physical connector and the value 'false(2)' otherwise. |
| 1.3.6.1.4.1.2272.1.50.2 | NodercWisTrap | |||
| 1.3.6.1.4.1.2272.1.50.2.1 | ScalarrcWisSonetTrapType | read-only | current | Used to indicate a particular type of 10GE Sonet trap. |
| 1.3.6.1.4.1.2272.1.50.2.2 | ScalarrcWisSonetTrapIndication | read-only | current | Used to indicate an indication for a 10GE Sonet trap. |
| 1.3.6.1.4.1.2272.1.51 | NodercRec | |||
| 1.3.6.1.4.1.2272.1.51.1 | TablercRecReservTable | not-accessible | current | This table would display the statistics of several HW record type used. This will also let the user reserve certain number of records for each type. |
| 1.3.6.1.4.1.2272.1.51.1.1 | RowrcRecReservTablEntry | not-accessible | current | |
| 1.3.6.1.4.1.2272.1.51.1.1.1 | ColumnrcRecReservRecordType | read-only | current | . |
| 1.3.6.1.4.1.2272.1.51.1.1.2 | ColumnrcRecReservUsed | read-only | current | Displayes the number of HW records actually usee by the recordType. |
| 1.3.6.1.4.1.2272.1.51.1.1.3 | ColumnrcRecReservReserved | read-only | current | Displayes the number of HW records reserved for the recordType. |
| 1.3.6.1.4.1.2272.1.51.1.1.4 | ColumnrcRecReservNewReserved | read-write | current | Displayes the number of HW records that w ill be reserved for this recordType after reset if the configuration is saved. |
| 1.3.6.1.4.1.2272.1.51.1.1.5 | ColumnrcRecReservDefReserved | read-only | current | Number of records reserved for this recordType if loaded with factory default. |
| 1.3.6.1.4.1.2272.1.52 | NodercTdc | |||
| 1.3.6.1.4.1.2272.1.53 | NodercLacp | |||
| 1.3.6.1.4.1.2272.1.53.1 | NodercLacpGlobal | |||
| 1.3.6.1.4.1.2272.1.53.1.1 | ScalarrcLacpGlobalEnable | read-write | current | globally enable/disable LACP |
| 1.3.6.1.4.1.2272.1.53.1.2 | ScalarrcLacpGlobalSystemPriority | read-write | current | set system priority to all the LACP enabled aggregators and prots |
| 1.3.6.1.4.1.2272.1.53.1.3 | ScalarrcLacpGlobalFastPeriodicTime | read-write | current | The number of miliseconds between periodic transmissions using Short Timeouts. Set this value to all LACP enabled ports. |
| 1.3.6.1.4.1.2272.1.53.1.4 | ScalarrcLacpGlobalSlowPeriodicTime | read-write | current | The number of miliseconds between periodic transmissions using LONG Timeouts. Set this value to all LACP enabled ports. |
| 1.3.6.1.4.1.2272.1.53.1.5 | ScalarrcLacpGlobalTimeoutScale | read-write | current | Scalar value used to calculate timeout time from periodic time. Set this value to all LACP enabled ports. |
| 1.3.6.1.4.1.2272.1.53.1.6 | ScalarrcLacpGlobalAggrWaitTime | read-write | current | The number of mili seconds to delay aggregation to allow multiple links to aggregate simultaneously. |
| 1.3.6.1.4.1.2272.1.53.1.7 | ScalarrcLacpGlobalVlacpEnable | read-write | current | globally enable/disable Virtual LACP |
| 1.3.6.1.4.1.2272.1.53.1.8 | ScalarrcLacpGlobalVlacpMulticastMACAddress | read-write | current | Virtual LACP multicast MAC address |
| 1.3.6.1.4.1.2272.1.53.1.9 | ScalarrcLacpGlobalFastPeriodicTimeOper | read-only | current | The operating value of global fast periodic timer. |
| 1.3.6.1.4.1.2272.1.53.1.10 | ScalarrcLacpGlobalSlowPeriodicTimeOper | read-only | current | The operating value of global show periodic time. |
| 1.3.6.1.4.1.2272.1.53.1.11 | ScalarrcLacpGlobalTimeoutScaleOper | read-only | current | The operating value of global timeout scale. |
| 1.3.6.1.4.1.2272.1.53.1.12 | ScalarrcLacpGlobalAggrWaitTimeOper | read-only | current | The operating value of global aggregate wait time. |
| 1.3.6.1.4.1.2272.1.53.1.13 | ScalarrcLacpGlobalSmltSysId | read-write | current | LACP system ID for SMLT |
| 1.3.6.1.4.1.2272.1.53.1.14 | ScalarrcLacpGlobalSystemMac | read-write | current | LACP system MAC. |
| 1.3.6.1.4.1.2272.1.53.1.15 | ScalarrcLacpGlobalVlacpHoldTime | read-write | current | The number of seconds to hold down all vlacp enabled links |
| 1.3.6.1.4.1.2272.1.53.1.16 | ScalarrcLacpGlobalVlacpSeqNumEnable | read-write | current | globally enable/disable Virtual LACP Sequence Number |
| 1.3.6.1.4.1.2272.1.53.2 | TablercVlacpPeerMacAddressTable | not-accessible | current | Virtual LACP Peer Mac Address table |
| 1.3.6.1.4.1.2272.1.53.2.1 | RowrcVlacpPeerMacAddressEntry | not-accessible | current | Entry containing info. for a particular peer |
| 1.3.6.1.4.1.2272.1.53.2.1.1 | ColumnrcVlacpPeerMacAddressMAC | not-accessible | current | Virtual LACP peer mac address on a port/MLT |
| 1.3.6.1.4.1.2272.1.53.2.1.2 | ColumnrcVlacpPeerMacAddressMltId | read-create | current | MLT Id on which Virtual LACP peer mac address is directly or indirectly connected |
| 1.3.6.1.4.1.2272.1.53.2.1.3 | ColumnrcVlacpPeerMacAddressPort | read-create | current | Ports on which Virtual LACP peer mac address is directly or indirectly connected |
| 1.3.6.1.4.1.2272.1.53.2.1.4 | ColumnrcVlacpPeerMacAddressIpAddr | read-create | current | Virtual LACP peer Ip Address on port/MLT |
| 1.3.6.1.4.1.2272.1.53.2.1.5 | ColumnrcVlacpPeerMacAddressRowStatus | read-create | current | Used to create/delete entries in the peer address table |
| 1.3.6.1.4.1.2272.1.53.3 | NodercVlacpGlobal | |||
| 1.3.6.1.4.1.2272.1.53.3.1 | ScalarrcVlacpGlobalEnable | read-write | current | Globally enable/disable VLACP. This MIB object is replacing rcLacpGlobalVlacpEnable for 8600. |
| 1.3.6.1.4.1.2272.1.53.3.2 | ScalarrcVlacpGlobalFastPeriodicTime | read-write | current | The number of milliseconds between periodic transmissions using Short Timeouts. |
| 1.3.6.1.4.1.2272.1.53.3.3 | ScalarrcVlacpGlobalSlowPeriodicTime | read-write | current | The number of milliseconds between periodic transmissions using LONG Timeouts. |
| 1.3.6.1.4.1.2272.1.53.3.4 | ScalarrcVlacpGlobalTimeout | read-write | current | Sets the VLACP Global timeout value. |
| 1.3.6.1.4.1.2272.1.53.3.5 | ScalarrcVlacpGlobalTimeoutScale | read-write | current | Scalar value used to calculate timeout time from periodic time. |
| 1.3.6.1.4.1.2272.1.53.3.6 | ScalarrcVlacpGlobalMacAddress | read-write | current | Multicast Mac Address exclusively used for VLACP Pdus. |
| 1.3.6.1.4.1.2272.1.53.3.7 | ScalarrcVlacpApplyGlobalToPort | read-write | current | Applies Global values to port parameters when true. |
| 1.3.6.1.4.1.2272.1.53.4 | TablercLacpKeyTable | not-accessible | current | Table of settings associated with specific LACP keys. |
| 1.3.6.1.4.1.2272.1.53.4.1 | RowrcLacpKeyEntry | not-accessible | current | Entry containing data associated with a specific LACP key. |
| 1.3.6.1.4.1.2272.1.53.4.1.1 | ColumnrcLacpKeyValue | not-accessible | current | LACP key value to which settings are associated. |
| 1.3.6.1.4.1.2272.1.53.4.1.2 | ColumnrcLacpKeyRowStatus | read-create | current | Used to create/delete entries in the lacp key table |
| 1.3.6.1.4.1.2272.1.53.4.1.3 | ColumnrcLacpKeyMltId | read-create | current | MLT Id associated with this key value. |
| 1.3.6.1.4.1.2272.1.53.4.1.4 | ColumnrcLacpKeySmltId | read-create | current | SMLT Id associated with this key value. |
| 1.3.6.1.4.1.2272.1.53.5 | NodercLacpNotificationObjects | |||
| 1.3.6.1.4.1.2272.1.53.5.1 | ScalarrcLacpMisconfigType | accessible-for-notify | current | This indicates the reason for Lacp Misconfig trap. Used by rcnLacpMisconfigTrap trap. |
| 1.3.6.1.4.1.2272.1.56 | NodercLicense | |||
| 1.3.6.1.4.1.2272.1.56.1 | ScalarrcLicenseNumber | read-only | current | Bit position number of license bitmap |
| 1.3.6.1.4.1.2272.1.56.2 | ScalarrcLicenseBitMap | read-only | current | License bit map. Bitmap number is defined in rcLicenseNumber |
| 1.3.6.1.4.1.2272.1.56.3 | ScalarrcLicenseFileName | read-only | current | Current running license file name. Empty mean no license running. Empty means there is no license file installed |
| 1.3.6.1.4.1.2272.1.56.4 | ScalarrcLicenseLicenseType | read-only | current | This indicates the current running license level type |
| 1.3.6.1.4.1.2272.1.56.5 | ScalarrcLicenseDurationType | read-only | current | This indicates the current running license duration type |
| 1.3.6.1.4.1.2272.1.56.6 | ScalarrcLicenseFactoryTrialPeriodRemainingDays | read-only | current | This indicates days left before the factory default trial period expired. Only applicable to the type trialFactoryDefault(2) iin object rcLicenseDurationType. … |
| 1.3.6.1.4.1.2272.1.56.7 | ScalarrcLicenseDaysLeftBeforeExpiration | accessible-for-notify | current | This indicates days left before time based license expire. Only applicable to Time Based license and trial period. |
| 1.3.6.1.4.1.2272.1.56.8 | ScalarrcLicenseDaysAfterExpiration | accessible-for-notify | current | Number of days the license has been expired. It is only applicable to non permanet type |
| 1.3.6.1.4.1.2272.1.56.9 | ScalarrcLicenseGenerationTime | read-only | current | Date of the license file is generated. It there is no license file, value '0000000000000000'H will be returned |
| 1.3.6.1.4.1.2272.1.56.10 | ScalarrcLicenseExpirationTime | read-only | current | Date of the license file is expired. If there is no license file or license file has no expiration date date (perpetual license), value '0000000000000000'H wil… |
| 1.3.6.1.4.1.2272.1.57 | NodercEap | |||
| 1.3.6.1.4.1.2272.1.57.1 | NodercEapGlobal | |||
| 1.3.6.1.4.1.2272.1.57.1.1 | ScalarrcEapGlobalRadAcctEnable | read-write | current | Indicates whether EAP Sessions need to be Accounted with a RADIUS server. When this value is TRUE, device attempts to send RADIUS Accounting-Start and Accounti… |
| 1.3.6.1.4.1.2272.1.57.1.2 | ScalarrcEapGlobalClearStats | read-write | current | When the value of this variable is set to TRUE, all the EAPOL (8021x) related statistics will be reset. |
| 1.3.6.1.4.1.2272.1.57.1.3 | ScalarrcEapGlobalGuestVlanEnable | read-write | current | When this variable is set to TRUE, EAPoL Guest Vlan feature will be enabled globally |
| 1.3.6.1.4.1.2272.1.57.1.4 | ScalarrcEapGlobalGuestVlanId | read-write | current | A value representing the VLAN to be used as a Global Guest VLAN. When corresponding value is not specified at the port level, supplicants are granted access to… |
| 1.3.6.1.4.1.2272.1.57.1.5 | ScalarrcEapGlobalRadAuthNonEapClients | read-write | current | When this variable is set to TRUE, Radius Mac Centralization feature will be enabled globally |
| 1.3.6.1.4.1.2272.1.57.1.6 | ScalarrcEapGlobalRadDiscardFilterAgeout | read-write | current | Age out period for pending non-eap-macs due to server timeout or unreachable |
| 1.3.6.1.4.1.2272.1.57.1.10 | ScalarrcEapGlobalNonEapRadiusPwdAttrFmt | read-write | current | This object controls the format of the RADIUS password attribute that is included in requests to the RADIUS server for authenticating non-EAP clients (MAC addr… |
| 1.3.6.1.4.1.2272.1.57.1.11 | ScalarrcEapGlobalNonEapRadiusPwdAttrKeyString | read-write | current | Key string used in the password format for Non-Eap RADIUS authentication. If the key string is configured, the password attribute will be <ipaddress>.<mac-addr… |
| 1.3.6.1.4.1.2272.1.57.1.12 | ScalarrcEapGlobalClearNonEap | read-write | current | When the value of this variable is set to TRUE, all the Non-EAPOL MAC sessions on port will be cleared. This will alawys return False. |
| 1.3.6.1.4.1.2272.1.57.2 | TablercEapPortTable | not-accessible | current | EAP properietery table for port level commands |
| 1.3.6.1.4.1.2272.1.57.2.1 | RowrcEapPortEntry | not-accessible | current | Entry containing the EAP properietry configuration information at the port level. |
| 1.3.6.1.4.1.2272.1.57.2.1.1 | ColumnrcEapPortIndex | not-accessible | current | An index value that uniquely identifies a port. This value is similar to ifIndex in MIB2. |
| 1.3.6.1.4.1.2272.1.57.2.1.2 | ColumnrcEapPortGuestVlanEnable | read-write | current | When this variable is set to TRUE, EAPoL Guest Vlan feature will be enabled on the port |
| 1.3.6.1.4.1.2272.1.57.2.1.3 | ColumnrcEapPortGuestVlanId | read-write | current | A value representing the VLAN to be used as a Guest VLAN. Access for unautheticated host/s connected to this port is provided through this VLAN. A value of 0 i… |
| 1.3.6.1.4.1.2272.1.57.2.1.4 | ColumnrcEapPortMultiHostEnable | read-write | current | When this variable is set to TRUE, the system is enabled to have multiple 802.1X supplicants authenticated from the same port |
| 1.3.6.1.4.1.2272.1.57.2.1.5 | ColumnrcEapPortMultiHostMaxClients | read-write | current | Integer value representing the maximum number of supplicants that are allowed to get authenticated on the port. This is applicable rcEapPortMultiHostEnable is … |
| 1.3.6.1.4.1.2272.1.57.2.1.6 | ColumnrcEapPortAllowNonEapHost | read-write | current | When this variable is set to TRUE, the system is enabled to allow hosts that do not participate in 802.1X authentication to get network access. |
| 1.3.6.1.4.1.2272.1.57.2.1.7 | ColumnrcEapPortNonEapMaxClients | read-write | current | Integer value representing the maximum number of non-802.1X hosts that are allowed to connect to the port. A value of 0 indicates that non-802.1X authenticatio… |
| 1.3.6.1.4.1.2272.1.57.2.1.8 | ColumnrcEapPortRadAuthNonEapClients | read-write | current | When this variable is set to TRUE, the system is enabled to allow Non-Eap hosts on the port to get network access through radius based Mac authorization. |
| 1.3.6.1.4.1.2272.1.57.2.1.9 | ColumnrcEapPortShutDownOnIntrusion | read-write | current | When this variable is set to TRUE, the port is shutdown on encountering [max + 1st] non-eap client on the port |
| 1.3.6.1.4.1.2272.1.57.2.1.10 | ColumnrcEapPortStatus | read-write | current | This object allows enabling EAPoL on the port. If status is auto(2), EAPoL is enabled and based on the 802.1x authentication, traffic is allowed. If status is … |
| 1.3.6.1.4.1.2272.1.57.2.1.11 | ColumnrcEapPortEapMaxClients | read-write | current | This object specifies the maximum number of EAP-authentication MAC addresses allowed on this port. A value of 0 indicates that 802.1X authentication is disable… |
| 1.3.6.1.4.1.2272.1.57.2.1.12 | ColumnrcEapPortMultiHostSingleAuthEnabled | read-write | current | This object controls whether non-EAP clients (MAC addresses) may be automatically authenticated on the port after one client has been authenticated (known as M… |
| 1.3.6.1.4.1.2272.1.57.2.1.16 | ColumnrcEapPortFailOpenVlanId | read-write | current | This object specifies the ID of the Fail-Open VLAN for this port. Authenticated devices are moved into the configured Fail Open VLAN when the switch declares t… |
| 1.3.6.1.4.1.2272.1.57.3 | TablercEapPortAllowedMacTable | not-accessible | current | EAP properietery table for allowed mac addresses of non EAP clients |
| 1.3.6.1.4.1.2272.1.57.3.1 | RowrcEapPortAllowedMacEntry | not-accessible | current | Entry containing MAC addresses for Non EAP hosts allowed on the port |
| 1.3.6.1.4.1.2272.1.57.3.1.1 | ColumnrcEapPortAllowedMacPort | not-accessible | current | An index value that uniquely identifies a port. This value is similar to ifIndex in MIB2. |
| 1.3.6.1.4.1.2272.1.57.3.1.2 | ColumnrcEapPortAllowedMacAddr | not-accessible | current | MAC address of a non EAP host that is granted access on the port. |
| 1.3.6.1.4.1.2272.1.57.3.1.3 | ColumnrcEapPortAllowedMacRowStatus | read-write | current | Used to create/delete entries in rcEapPortAllowedMacTable. |
| 1.3.6.1.4.1.2272.1.57.4 | TablercEapMultiHostStatusTable | not-accessible | current | This table is used to control the EAP multihost configuration for each port in the system. |
| 1.3.6.1.4.1.2272.1.57.4.1 | RowrcEapMultiHostStatusEntry | not-accessible | current | The EAP multihost configuration for a port. |
| 1.3.6.1.4.1.2272.1.57.4.1.1 | ColumnrcEapMultiHostStatusPortNumber | not-accessible | current | The Port number associated with this client. |
| 1.3.6.1.4.1.2272.1.57.4.1.2 | ColumnrcEapMultiHostStatusClientMACAddr | not-accessible | current | The MAC address of the client. |
| 1.3.6.1.4.1.2272.1.57.4.1.3 | ColumnrcEapMultiHostStatusPaeState | read-only | current | The current value of the Authenticator PAE state machine. |
| 1.3.6.1.4.1.2272.1.57.4.1.4 | ColumnrcEapMultiHostStatusBackendAuthState | read-only | current | The current state of the Backend Authentication state machine. |
| 1.3.6.1.4.1.2272.1.57.4.1.5 | ColumnrcEapMultiHostStatusVlanId | read-only | current | The Vlan-Id associated with this client MAC. This Vlan could be port-based Vlan or Radius assigned Vlan. |
| 1.3.6.1.4.1.2272.1.57.5 | TablercEapMultiHostSessionStatsTable | not-accessible | current | A table that contains the session statistics objects for the Authenticator PAE associated with each EAP client on each Port.An entry appears in this table for … |
| 1.3.6.1.4.1.2272.1.57.5.1 | RowrcEapMultiHostSessionStatsEntry | not-accessible | current | The session statistics information for an Authenticator PAE. This shows the current values being collected for each session that is still in progress, or the f… |
| 1.3.6.1.4.1.2272.1.57.5.1.1 | ColumnrcEapMultiHostSessionStatsPortNumber | not-accessible | current | The Port number associated with this client. |
| 1.3.6.1.4.1.2272.1.57.5.1.2 | ColumnrcEapMultiHostSessionStatsClientMACAddr | not-accessible | current | The MAC address of this client. |
| 1.3.6.1.4.1.2272.1.57.5.1.3 | ColumnrcEapMultiHostSessionId | read-only | current | A unique identifier for the session, in the form of a printable ASCII string of at least three characters. |
| 1.3.6.1.4.1.2272.1.57.5.1.4 | ColumnrcEapMultiHostSessionAuthenticMethod | read-only | current | The authentication method used to establish the session. |
| 1.3.6.1.4.1.2272.1.57.5.1.5 | ColumnrcEapMultiHostSessionTime | read-only | current | The duration of the session in seconds. |
| 1.3.6.1.4.1.2272.1.57.5.1.6 | ColumnrcEapMultiHostSessionTerminateCause | read-only | current | The reason for the session termination. |
| 1.3.6.1.4.1.2272.1.57.5.1.7 | ColumnrcEapMultiHostSessionUserName | read-only | current | The User-Name representing the identity of the Supplicant PAE. |
| 1.3.6.1.4.1.2272.1.57.6 | TablercEapPortRadiusMacTable | not-accessible | current | EAP proprietary table for non-EAP hosts authenticated using radius server. |
| 1.3.6.1.4.1.2272.1.57.6.1 | RowrcEapPortRadiusMacEntry | not-accessible | current | Entry containing MAC addresses for Non EAP hosts authenticated using radius server. |
| 1.3.6.1.4.1.2272.1.57.6.1.1 | ColumnrcEapPortRadiusMacPort | not-accessible | current | An index value that uniquely identifies a port. |
| 1.3.6.1.4.1.2272.1.57.6.1.2 | ColumnrcEapPortRadiusMacAddr | not-accessible | current | MAC address of a non EAP host that is authenticated using radius server. |
| 1.3.6.1.4.1.2272.1.57.6.1.3 | ColumnrcEapPortRadiusMacStatus | read-only | current | Authentication status of the non EAP host that is authenticated using radius server. |
| 1.3.6.1.4.1.2272.1.57.6.1.4 | ColumnrcEapPortRadiusVlanId | read-only | current | The Vlan-Id associated with this Non-EAP client MAC. This Vlan could be port-based Vlan or Radius assigned vlan. |
| 1.3.6.1.4.1.2272.1.57.6.1.5 | ColumnrcEapPortRadiusMacClear | read-write | current | Clears the Non-EAP MAC entry associated with this Index. The value should be set to true to clear the Non-EAP MAC entry. This MIB always return false. |
| 1.3.6.1.4.1.2272.1.58 | NodercMcast | |||
| 1.3.6.1.4.1.2272.1.59 | NodercOspf | |||
| 1.3.6.1.4.1.2272.1.60 | NodercFdb | |||
| 1.3.6.1.4.1.2272.1.60.1 | TablercGlobalMacFilterTable | not-accessible | current | A list of Global Mac filter entries. |
| 1.3.6.1.4.1.2272.1.60.1.1 | RowrcGlobalMacFilterEntry | not-accessible | current | this entry is used for global mac filtering.Any Mac address configured here will be discarded globally by the switch. |
| 1.3.6.1.4.1.2272.1.60.1.1.1 | ColumnrcGlobalMacFilterAddress | not-accessible | current | A MAC address which will be discarded globally by the switch |
| 1.3.6.1.4.1.2272.1.60.1.1.2 | ColumnrcGlobalMacFilterRowStatus | read-write | current | Used to create/delete entries in rcGlobalMacFilterTable. |
| 1.3.6.1.4.1.2272.1.61 | NodercIgap | |||
| 1.3.6.1.4.1.2272.1.62 | NodercIpv6 | |||
| 1.3.6.1.4.1.2272.1.62.1 | NodercIpv6Mib | |||
| 1.3.6.1.4.1.2272.1.62.1.0 | NodercIpv6Notifications | |||
| 1.3.6.1.4.1.2272.1.62.1.1 | NodercIpv6Objects | |||
| 1.3.6.1.4.1.2272.1.62.1.1.1 | NodercIpv6Scalars | |||
| 1.3.6.1.4.1.2272.1.62.1.1.1.1 | ScalarrcIpv6IcmpErrorInterval | read-write | current | The rate (in milliseconds) at which ICMP error messages can be sent out. A value of zero means not be send any. |
| 1.3.6.1.4.1.2272.1.62.1.1.1.2 | ScalarrcIpv6MulticastAdminStatus | read-write | current | This indicates the global admin status for multicast. |
| 1.3.6.1.4.1.2272.1.62.1.1.1.3 | ScalarrcIpv6IcmpNetUnreach | read-write | current | Used to set icmp net unreach feature enable/ disable. |
| 1.3.6.1.4.1.2272.1.62.1.1.1.4 | ScalarrcIpv6IcmpRedirectMsg | read-write | current | Used to set icmp redirect feature enable/ disable. |
| 1.3.6.1.4.1.2272.1.62.1.1.1.5 | ScalarrcIpv6IcmpErrorQuota | read-write | current | The number of icmp error messages that can be sent during the icmp error interval. A value of zero means not be send any. |
| 1.3.6.1.4.1.2272.1.62.1.1.1.6 | ScalarrcIpv6GlobalAdminEnabled | read-write | current | Indicates whether IPv6 has been administratively enabled. |
| 1.3.6.1.4.1.2272.1.62.1.1.1.7 | ScalarrcIpv6GlobalOperEnabled | read-write | current | Indicates whether IPv6 is currently enabled. |
| 1.3.6.1.4.1.2272.1.62.1.1.1.8 | ScalarrcIpv6PrefixListTableSize | read-only | current | Size of Ipv6 Prefix List Table |
| 1.3.6.1.4.1.2272.1.62.1.1.1.9 | ScalarrcIpv6ClearDhcpCounters | read-write | current | Setting this object will clear IPv6 DHCP counters. |
| 1.3.6.1.4.1.2272.1.62.1.1.1.10 | ScalarrcIpv6RouteStaticClear | read-write | current | Clear all IPv6 static routes. |
| 1.3.6.1.4.1.2272.1.62.1.1.1.11 | ScalarrcIpv6RouteStaticGlobalAdminEnabled | read-write | current | Used to globally enable/disable all IPv6 static routes. |
| 1.3.6.1.4.1.2272.1.62.1.1.1.12 | ScalarrcIpv6IcmpAnycastEchoReply | read-write | current | Used to enable/disable icmp echo reply msg for anycast addresses. |
| 1.3.6.1.4.1.2272.1.62.1.1.1.13 | ScalarrcIpv6IcmpMulticastEchoReply | read-write | current | Used to enable/disable icmp echo reply msg for multicast addresses. |
| 1.3.6.1.4.1.2272.1.62.1.1.1.14 | ScalarrcIpv6Autoconfig | read-write | current | Used to enable / disable IPv6 autoconfiguration from router advertisements |
| 1.3.6.1.4.1.2272.1.62.1.1.1.15 | ScalarrcIpv6IcmpAddrUnreach | read-write | current | Used to enable / disable address unreachable message |
| 1.3.6.1.4.1.2272.1.62.1.1.1.16 | ScalarrcIpv6IcmpPortUnreach | read-write | current | Used to enable / disable port unreachable message |
| 1.3.6.1.4.1.2272.1.62.1.1.1.17 | ScalarrcIpv6SlowPathToCpu | read-write | current | Used to enable / disable slow-path-to-cpu |
| 1.3.6.1.4.1.2272.1.62.1.1.1.18 | ScalarrcIpv6ClearGlobalIcmpStats | read-write | current | Setting this object will clear global IPv6 ICMP statistics |
| 1.3.6.1.4.1.2272.1.62.1.1.1.19 | ScalarrcIpv6EcmpEnable | read-write | current | Used to globally enable/disable equal-cost multi-path feature. |
| 1.3.6.1.4.1.2272.1.62.1.1.1.20 | ScalarrcIpv6EcmpMaxPath | read-write | current | Used to globally set the maximum number of paths that can be equal cost. |
| 1.3.6.1.4.1.2272.1.62.1.1.1.21 | ScalarrcIpv6RoutePrefTableSize | read-only | current | table size of the rcIpv6RoutePrefTable |
| 1.3.6.1.4.1.2272.1.62.1.1.1.22 | ScalarrcIpv6AlternativeRouteEnable | read-write | current | Used to globally enable/disable alternative-route. |
| 1.3.6.1.4.1.2272.1.62.1.1.1.23 | ScalarrcIpv6SourceRouteEnable | read-write | current | Used to globally enable/disable ipv6 source routing feature. |
| 1.3.6.1.4.1.2272.1.62.1.1.1.24 | ScalarrcIpv6IcmpMulticastRequestEnable | read-write | current | Used to globally enable/disable ipv6 icmp echo multicast request feature. |
| 1.3.6.1.4.1.2272.1.62.1.1.2 | TablercIpv6InterfaceTable | not-accessible | current | This table contains list of IPv6 interfaces and per-interface IPv6-specific information. |
| 1.3.6.1.4.1.2272.1.62.1.1.2.1 | RowrcIpv6InterfaceEntry | not-accessible | current | An entry of ipv6 interface In Table containing per-interface information. |
| 1.3.6.1.4.1.2272.1.62.1.1.2.1.1 | ColumnrcIpv6InterfaceIfIndex | not-accessible | current | An unique value to identify a physical interface or a logical interface (VLAN). For the brouter port it is the ifindex of the port and in the case of the vlan … |
| 1.3.6.1.4.1.2272.1.62.1.1.2.1.2 | ColumnrcIpv6InterfaceIdentifier | read-create | current | IPv6 address interface identifiers. This is a binary string of up to 8 octets in network byte-order. |
| 1.3.6.1.4.1.2272.1.62.1.1.2.1.3 | ColumnrcIpv6InterfaceIdentifierLength | read-create | current | The length of the Interface Identifier in bits. |
| 1.3.6.1.4.1.2272.1.62.1.1.2.1.4 | ColumnrcIpv6InterfaceDescr | read-create | current | A textual string containing information about the interface. This string may be set by network management system. |
| 1.3.6.1.4.1.2272.1.62.1.1.2.1.5 | ColumnrcIpv6InterfaceVlanId | read-create | current | A value that uniquely identifies the Virtual LAN associated with this entry. This value corresponds to the lower 12 bits in the IEEE 802.1Q VLAN Tag. |
| 1.3.6.1.4.1.2272.1.62.1.1.2.1.6 | ColumnrcIpv6InterfaceType | read-only | current | The interface type. |
| 1.3.6.1.4.1.2272.1.62.1.1.2.1.7 | ColumnrcIpv6InterfaceReasmMaxSize | read-create | current | MTU for this IPv6 interface, this value should be same for all the ip addresses defined on this interface. In VSP9000, Supported range for IO interface, suppor… |
| 1.3.6.1.4.1.2272.1.62.1.1.2.1.8 | ColumnrcIpv6InterfacePhysAddress | read-only | current | The media-dependent `physical' address, for the ethernet media it is the MAC address |
| 1.3.6.1.4.1.2272.1.62.1.1.2.1.9 | ColumnrcIpv6InterfaceAdminStatus | read-create | current | The indication of whether IPv6 is enabled (up) or disabled (down) on this interface. This object does not affect the state of the interface itself, only its co… |
| 1.3.6.1.4.1.2272.1.62.1.1.2.1.10 | ColumnrcIpv6InterfaceOperStatus | read-only | current | Operating status of the interface. |
| 1.3.6.1.4.1.2272.1.62.1.1.2.1.11 | ColumnrcIpv6InterfaceReachableTime | read-create | current | The time (in milliseconds) a neighbor is considered reachable after receiving a reachability confirmation. REFERENCE RFC2461, Section 6.3.2 |
| 1.3.6.1.4.1.2272.1.62.1.1.2.1.12 | ColumnrcIpv6InterfaceRetransmitTime | read-create | deprecated | Deprecated. Use rcIpv6InterfaceRetransmitTimer instead. |
| 1.3.6.1.4.1.2272.1.62.1.1.2.1.13 | ColumnrcIpv6InterfaceMulticastAdminStatus | read-create | current | This indicates the admin status for multicast for this interface. |
| 1.3.6.1.4.1.2272.1.62.1.1.2.1.14 | ColumnrcIpv6InterfaceRowStatus | read-create | current | Row status for create/delete. |
| 1.3.6.1.4.1.2272.1.62.1.1.2.1.15 | ColumnrcIpv6InterfaceDhcpEnabled | read-create | current | Enable or disable DHCP on the specified interface. |
| 1.3.6.1.4.1.2272.1.62.1.1.2.1.16 | ColumnrcIpv6InterfaceMacOffset | read-create | current | Used to request a particular MAC for an IPv6 VLAN. The system has 1536 mac addresses, last 4 are reserved for MG. One can either mention a mac offset while con… |
| 1.3.6.1.4.1.2272.1.62.1.1.2.1.17 | ColumnrcIpv6InterfaceRetransmitTimer | read-create | current | The time (in milliseconds) between retransmissions of Neighbor Solicitation messages to a neighbor when resolving the address or when probing the reachability … |
| 1.3.6.1.4.1.2272.1.62.1.1.2.1.18 | ColumnrcIpv6InterfaceCurHopLimit | read-create | current | The default value to be placed in the current hop limit field in router advertisements sent from this interface. The value should be set to the current diamete… |
| 1.3.6.1.4.1.2272.1.62.1.1.2.1.20 | ColumnrcIpv6InterfaceClearIcmpStats | read-create | current | Clear ICMP statistics for an interface |
| 1.3.6.1.4.1.2272.1.62.1.1.2.1.21 | ColumnrcIpv6InterfaceClearGeneralStats | read-create | current | Clear general statistics for an interface |
| 1.3.6.1.4.1.2272.1.62.1.1.2.1.22 | ColumnrcIpv6InterfaceClearNeighborCache | read-create | current | Clear Neighbor Cache for an interface |
| 1.3.6.1.4.1.2272.1.62.1.1.2.1.23 | ColumnrcIpv6InterfaceClearDestinationCache | read-create | current | Clear Destination Cache for an interface |
| 1.3.6.1.4.1.2272.1.62.1.1.2.1.24 | ColumnrcIpv6InterfaceReversePathCheckEnable | read-create | current | Used to indicate whether this interface should perform Reverse Path Check |
| 1.3.6.1.4.1.2272.1.62.1.1.2.1.25 | ColumnrcIpv6InterfaceReversePathCheckMode | read-create | current | Reverse Path Checking mode. |
| 1.3.6.1.4.1.2272.1.62.1.1.2.1.26 | ColumnrcIpv6InterfaceForwardingEnabled | read-create | current | Used to indicate whether this interface should perform forwarding |
| 1.3.6.1.4.1.2272.1.62.1.1.2.1.27 | ColumnrcIpv6InterfaceRsmltEnable | read-create | current | Used to indicate whether this interface has rsmlt enabled or not |
| 1.3.6.1.4.1.2272.1.62.1.1.2.1.28 | ColumnrcIpv6InterfaceBfdEnable | read-create | current | Used to indicate whether this interface has BFD enabled or not |
| 1.3.6.1.4.1.2272.1.62.1.1.2.1.29 | ColumnrcIpv6InterfaceProcessRedirect | read-create | current | Used to indicate whether this interface has ProcessRedirect enabled or not |
| 1.3.6.1.4.1.2272.1.62.1.1.2.1.30 | ColumnrcIpv6InterfaceIpsecEnable | read-create | current | Used to indicate whether this interface has Ipsec enabled or not |
| 1.3.6.1.4.1.2272.1.62.1.1.3 | TablercIpv6AddressTable | not-accessible | current | This table contains addressing information relevant to the entity's interfaces. This table does not contain multicast address information. Tables for such info… |
| 1.3.6.1.4.1.2272.1.62.1.1.3.1 | RowrcIpv6AddressEntry | not-accessible | current | An address mapping for a particular interface. Note that when an address is added to an interface the resulted prefix is added to that interface. |
| 1.3.6.1.4.1.2272.1.62.1.1.3.1.1 | ColumnrcIpv6AddressIfIndex | not-accessible | current | The index value which uniquely identifies the interface to which this entry is applicable. The interface identified by a particular value of this index is the … |
| 1.3.6.1.4.1.2272.1.62.1.1.3.1.2 | ColumnrcIpv6AddressAddr | not-accessible | current | The IPv6 address to which this entry's addressing information pertains. This is one of the ipv6 addresses that this interface(identified by the rcIpv6AddressIf… |
| 1.3.6.1.4.1.2272.1.62.1.1.3.1.3 | ColumnrcIpv6AddressType | read-write | current | The type of address. It is either unicast or anycast IPv6 addresses (RFC3513). |
| 1.3.6.1.4.1.2272.1.62.1.1.3.1.4 | ColumnrcIpv6AddressPrefixLength | read-write | current | Prefix Length value for this address. Cannot be changed after the creation. This field MUST be provided in order to create an entry in this table. |
| 1.3.6.1.4.1.2272.1.62.1.1.3.1.5 | ColumnrcIpv6AddressPrefix | read-only | current | A pointer to the row in the prefix table to which this address belongs. May be { 0 0 } if there is no such row. |
| 1.3.6.1.4.1.2272.1.62.1.1.3.1.6 | ColumnrcIpv6AddressOrigin | read-only | current | The origin of the address. The origin of the address, one of: other(1),manual(2), dhcp(4),linklayer(5), random(6) |
| 1.3.6.1.4.1.2272.1.62.1.1.3.1.7 | ColumnrcIpv6AddressStatus | read-only | current | The status of the address, describing if the address can be used for communication. It will One of: preferred(1), deprecated(2),invalid(3),inaccessible(4),unkn… |
| 1.3.6.1.4.1.2272.1.62.1.1.3.1.8 | ColumnrcIpv6AddressCreated | read-only | current | The value of sysUpTime at the time this entry was created. If this entry was created prior to the last re- initialization of the local network management subsy… |
| 1.3.6.1.4.1.2272.1.62.1.1.3.1.9 | ColumnrcIpv6AddressLastChanged | read-only | current | The value of sysUpTime at the time this entry was last updated. If this entry was updated prior to the last re- initialization of the local network management … |
| 1.3.6.1.4.1.2272.1.62.1.1.3.1.10 | ColumnrcIpv6AddressRowStatus | read-create | current | The status of this conceptual row. The RowStatus TC requires that this DESCRIPTION clause states under which circumstances other objects in this row can be mod… |
| 1.3.6.1.4.1.2272.1.62.1.1.3.1.11 | ColumnrcIpv6AddressValidLifetime | read-only | current | Valid lifetime in seconds, indicates how long this address is valid. A result of 4294967295 means infinite |
| 1.3.6.1.4.1.2272.1.62.1.1.3.1.12 | ColumnrcIpv6AddressPrefLifetime | read-only | current | Preferred lifetime in seconds, indicates how long this address is in use and not deprecated. A result of 4294967295 means infinite |
| 1.3.6.1.4.1.2272.1.62.1.1.4 | TablercIpv6PrefixTable | not-accessible | current | This table allows the user to determine the source of an IP address or set of IP addresses and allows other tables to share the information via pointer rather … |
| 1.3.6.1.4.1.2272.1.62.1.1.4.1 | RowrcIpv6PrefixEntry | not-accessible | current | An entry of ipv6 prefix In the Table. |
| 1.3.6.1.4.1.2272.1.62.1.1.4.1.1 | ColumnrcIpv6PrefixIfIndex | not-accessible | current | An unique value to identify an ipv6 interface. For the brouter port it is the ifindex of the port and in the case of the vlan it is the ifindex of the vlan. |
| 1.3.6.1.4.1.2272.1.62.1.1.4.1.2 | ColumnrcIpv6PrefixAddr | not-accessible | current | Prefix to create an ipv6 address in ipv6 interface table. |
| 1.3.6.1.4.1.2272.1.62.1.1.4.1.3 | ColumnrcIpv6PrefixLength | not-accessible | current | Mask to create an ipv6 prefix entry either will be advertised or suppressed |
| 1.3.6.1.4.1.2272.1.62.1.1.4.1.4 | ColumnrcIpv6PrefixVlanId | read-only | current | A value that uniquely identifies the Virtual LAN associated with this entry. This value corresponds to the lower 12 bits in the IEEE 802.1Q VLAN Tag. |
| 1.3.6.1.4.1.2272.1.62.1.1.4.1.5 | ColumnrcIpv6PrefixUseDefaultVal | read-write | current | Select one of the value to set/use it's value to default value. This is a bitmask field, setting all the bits means that all the options will be reverted to de… |
| 1.3.6.1.4.1.2272.1.62.1.1.4.1.6 | ColumnrcIpv6PrefixValidLife | read-write | obsolete | Valid lifetime in seconds, indicates how long this prefix advertised in the nbr advertisement is valid. |
| 1.3.6.1.4.1.2272.1.62.1.1.4.1.7 | ColumnrcIpv6PrefixPreferredLife | read-write | obsolete | Preferred lifetime in seconds, indicates how long this prefix advertised in advertisemt for this prefix. |
| 1.3.6.1.4.1.2272.1.62.1.1.4.1.8 | ColumnrcIpv6PrefixAtValidLife | read-write | current | Is the date and time, upon reaching this value the prefix will be expired, if configured this option will be included in the neighbor advertisement for this pr… |
| 1.3.6.1.4.1.2272.1.62.1.1.4.1.9 | ColumnrcIpv6PrefixAtPreferredLife | read-write | current | Is the date and time, upon reaching this value the prefix will be expired, if configured this option will be included in the neighbor advertisement for this pr… |
| 1.3.6.1.4.1.2272.1.62.1.1.4.1.10 | ColumnrcIpv6PrefixInfinite | read-write | current | if set the prefix's valid lifetime will not exprie. |
| 1.3.6.1.4.1.2272.1.62.1.1.4.1.11 | ColumnrcIpv6PrefixOnLinkFlag | read-write | current | if set then this prefix can be used for onlink determination. This value be placed in the L-bit field in the prefix information option. It is a 1 bit flag. |
| 1.3.6.1.4.1.2272.1.62.1.1.4.1.12 | ColumnrcIpv6PrefixAutoFlag | read-write | current | if set then this prefix can be used for autonomous address config. This value be placed in the auto-flag field in the prefix information option. It is a 1 bit … |
| 1.3.6.1.4.1.2272.1.62.1.1.4.1.13 | ColumnrcIpv6PrefixAddressEui | read-write | current | Use an EUI-64 interface ID in the low-order 64bits of the address when not specified in the address field. If enabled use EUI, otherwise use EUI-64 and complem… |
| 1.3.6.1.4.1.2272.1.62.1.1.4.1.14 | ColumnrcIpv6PrefixNoAdvertise | read-write | current | if set then this prefix can not be included in the neighbor advertisement. |
| 1.3.6.1.4.1.2272.1.62.1.1.4.1.15 | ColumnrcIpv6PrefixRowStatus | read-create | current | Row status for create/delete. |
| 1.3.6.1.4.1.2272.1.62.1.1.4.1.16 | ColumnrcIpv6PrefixValidLifetime | read-create | current | Valid lifetime in seconds, indicates how long this prefix advertised in the nbr advertisement is valid. Value of 4294967295 represents infinity. |
| 1.3.6.1.4.1.2272.1.62.1.1.4.1.17 | ColumnrcIpv6PrefixPreferredLifetime | read-create | current | Preferred lifetime in seconds, indicates how long this prefix advertised in advertisemt for this prefix. Value of 4294967295 represents infinity. |
| 1.3.6.1.4.1.2272.1.62.1.1.5 | TablercIpv6RouterAdvertTable | not-accessible | current | The table containing information used to construct router advertisements. |
| 1.3.6.1.4.1.2272.1.62.1.1.5.1 | RowrcIpv6RouterAdvertEntry | not-accessible | current | An entry containing information used to construct router advertisements. |
| 1.3.6.1.4.1.2272.1.62.1.1.5.1.1 | ColumnrcIpv6RouterAdvertIfIndex | not-accessible | current | An unique value to identify an ipv6 interface. For the brouter port it is the ifindex of the port and in the case of the vlan it is the ifindex of the vlan. |
| 1.3.6.1.4.1.2272.1.62.1.1.5.1.2 | ColumnrcIpv6RouterAdvertSendAdverts | read-write | current | A flag indicating whether or not the router sends periodic router advertisements and responds to router solicitations on this interface. REFERENCE RFC2461 Sect… |
| 1.3.6.1.4.1.2272.1.62.1.1.5.1.3 | ColumnrcIpv6RouterAdvertUseDefaultVal | read-write | current | Select one of the value to set/use it's value to default value, or set all the bits to indicate all the options will be set to their default value. |
| 1.3.6.1.4.1.2272.1.62.1.1.5.1.4 | ColumnrcIpv6RouterAdvertMaxInterval | read-write | current | Configure the max interval (in seconds) at which the transmission of route advertisments can occur on this interface. This must be no less than 4 seconds and n… |
| 1.3.6.1.4.1.2272.1.62.1.1.5.1.5 | ColumnrcIpv6RouterAdvertMinInterval | read-write | current | Configure the min interval (in seconds) at which the transmission of route advertisments can occur on this interface. This must be no less than 3 seconds and n… |
| 1.3.6.1.4.1.2272.1.62.1.1.5.1.6 | ColumnrcIpv6RouterAdvertReachableTime | read-write | current | The value (in milliseconds) to be placed in the router advertisement message sent by the router. The value zero means unspecified (by this router). Used to con… |
| 1.3.6.1.4.1.2272.1.62.1.1.5.1.7 | ColumnrcIpv6RouterAdvertRetransmitTimer | read-only | deprecated | The value (in milliseconds) to be placed in the retransmit timer field in router advertisement message sent from this interface. The value zero means unspecifi… |
| 1.3.6.1.4.1.2272.1.62.1.1.5.1.8 | ColumnrcIpv6RouterAdvertDefaultLifeTime | read-write | current | The value to be placed in the router lifetime field of router advertisements sent from this interface. This value MUST be either 0 or between rcIpv6RouterAdver… |
| 1.3.6.1.4.1.2272.1.62.1.1.5.1.9 | ColumnrcIpv6RouterAdvertCurHopLimit | read-write | current | The default value to be placed in the current hop limit field in router advertisements sent from this interface. The value should be set to the current diamete… |
| 1.3.6.1.4.1.2272.1.62.1.1.5.1.10 | ColumnrcIpv6RouterAdvertManagedFlag | read-write | current | if true then the M-bit(Managed address configureation) in the router adverisement will be set. REFERENCE RFC2461 Section 6.2.1 |
| 1.3.6.1.4.1.2272.1.62.1.1.5.1.11 | ColumnrcIpv6RouterAdvertOtherConfigFlag | read-write | current | if true then the O-bit (Other stateful Configuration) in the router adverisement will be set. REFERENCE RFC2461 Section 6.2.1 |
| 1.3.6.1.4.1.2272.1.62.1.1.5.1.12 | ColumnrcIpv6RouterAdvertDadNsNum | read-write | current | The number of neighbor solicitation messages for DAD (Duplicate address detection). A value 0 is used to disable DAD process on this interface. A value 1 is us… |
| 1.3.6.1.4.1.2272.1.62.1.1.5.1.13 | ColumnrcIpv6RouterAdvertLinkMTU | read-write | current | The value to be placed in MTU options sent by the router on this interface. A value of zero indicates that no MTU options are sent. REFERENCE RFC2461 Section 6… |
| 1.3.6.1.4.1.2272.1.62.1.1.5.1.14 | ColumnrcIpv6RouterAdvertRetransmitTime | read-write | current | The value (in milliseconds) to be placed in the retransmit timer field in router advertisement message sent from this interface. The value zero means unspecifi… |
| 1.3.6.1.4.1.2272.1.62.1.1.6 | TablercIpv6StaticRouteTable | not-accessible | current | This table contains list of routes that are created by the user to destination networks. |
| 1.3.6.1.4.1.2272.1.62.1.1.6.1 | RowrcIpv6StaticRouteEntry | not-accessible | current | An entry in the static route table for IPv6 can be created for a destination with a specific prefix length; multiple entries to the same destination are create… |
| 1.3.6.1.4.1.2272.1.62.1.1.6.1.1 | ColumnrcIpv6StaticRouteDest | not-accessible | current | The destination IPv6 address of this route. The values for the index objects rcIpv6StaticRouteDest and rcIpv6StaticRoutePrefixLength must be consistent. When t… |
| 1.3.6.1.4.1.2272.1.62.1.1.6.1.2 | ColumnrcIpv6StaticRoutePrefixLength | not-accessible | current | Indicates the number of leading one bits which form the mask to be logical-ANDed with the destination address before being compared to the value in the rcIpv6S… |
| 1.3.6.1.4.1.2272.1.62.1.1.6.1.3 | ColumnrcIpv6StaticRouteNextHop | not-accessible | current | Next hop IPv6 address for this destination. On remote routes, the address of the next system en route. For non-remote routes, a zero length string. |
| 1.3.6.1.4.1.2272.1.62.1.1.6.1.4 | ColumnrcIpv6StaticRouteIfIndex | not-accessible | current | The ifIndex value which identifies the local interface through which the next hop of this route should be reached. A value of 0 is valid and represents the sce… |
| 1.3.6.1.4.1.2272.1.62.1.1.6.1.5 | ColumnrcIpv6StaticRouteDistance | read-write | current | cost/distance to reach the destination for this node. |
| 1.3.6.1.4.1.2272.1.62.1.1.6.1.6 | ColumnrcIpv6StaticRouteStatus | read-only | current | (1)notReachable means the route is not reachable and no neighbor request entry is built to resolved the next-hop. It happens when there is no route or neighbor… |
| 1.3.6.1.4.1.2272.1.62.1.1.6.1.7 | ColumnrcIpv6StaticRoutePreference | read-write | current | Used to indicate the route preference of this entry. If there are more than one route that can be used to forward IP traffic, the route that has a highest pref… |
| 1.3.6.1.4.1.2272.1.62.1.1.6.1.8 | ColumnrcIpv6StaticRouteEnable | read-write | current | Used to enable/disable this entry. |
| 1.3.6.1.4.1.2272.1.62.1.1.6.1.9 | ColumnrcIpv6StaticRouteRowStatus | read-create | current | Row status for create/delete. |
| 1.3.6.1.4.1.2272.1.62.1.1.7 | TablercIpv6NetToPhysicalTable | not-accessible | current | The IP Address Translation table used for mapping from IP addresses to physical addresses. The Address Translation tables contain the IP address to 'physical' … |
| 1.3.6.1.4.1.2272.1.62.1.1.7.1 | RowrcIpv6NetToPhysicalEntry | not-accessible | current | Each entry contains one IP address to `physical' address equivalence. |
| 1.3.6.1.4.1.2272.1.62.1.1.7.1.1 | ColumnrcIpv6NetToPhysicalIfIndex | not-accessible | current | The index value which uniquely identifies the interface to which this entry is applicable. The interface identified by a particular value of this index is the … |
| 1.3.6.1.4.1.2272.1.62.1.1.7.1.2 | ColumnrcIpv6NetToPhysicalNetAddress | not-accessible | current | The IP Address corresponding to the media-dependent `physical' address. The address type of this object is specified in rcIpv6NetToPhysicalAddressType. Impleme… |
| 1.3.6.1.4.1.2272.1.62.1.1.7.1.3 | ColumnrcIpv6NetToPhysicalPhysAddress | read-create | current | The media-dependent `physical' address. As the entries in this table are typically not persistent when this object is written the entity SHOULD NOT save the ch… |
| 1.3.6.1.4.1.2272.1.62.1.1.7.1.4 | ColumnrcIpv6NetToPhysicalInterface | read-create | current | The field represents either a physical port id or the MLT port id. This entry is associated either with a port or with a MLT in a VLAN/Brouter port. If the val… |
| 1.3.6.1.4.1.2272.1.62.1.1.7.1.5 | ColumnrcIpv6NetToPhysicalLastUpdated | read-only | current | The value of sysUpTime at the time this entry was last updated. If this entry was updated prior to the last re- initialization of the local network management … |
| 1.3.6.1.4.1.2272.1.62.1.1.7.1.6 | ColumnrcIpv6NetToPhysicalType | read-create | current | The type of mapping. The 'dynamic(2)' type indicates that the IP address to physical addresses mapping has been dynamically resolved using e.g. IPv4 ARP or the… |
| 1.3.6.1.4.1.2272.1.62.1.1.7.1.8 | ColumnrcIpv6NetToPhysicalState | read-only | current | The Neighbor Unreachability Detection [4] state for the interface when the address mapping in this entry is used. If Neighbor Unreachability Detection is not i… |
| 1.3.6.1.4.1.2272.1.62.1.1.7.1.9 | ColumnrcIpv6NetToPhysicalRowStatus | read-create | current | The status of this conceptual row. The RowStatus TC requires that this DESCRIPTION clause states under which circumstances other objects in this row can be mod… |
| 1.3.6.1.4.1.2272.1.62.1.1.7.1.10 | ColumnrcIpv6NetToPhysicalBMac | read-only | current | If the rcIpv6NetToPhysicalEntry is learned from a SPBM network, instead of using port to track where the rcIpv6NetToPhysicalNetAddress come from, the backbone … |
| 1.3.6.1.4.1.2272.1.62.1.1.7.1.11 | ColumnrcIpv6NetToPhysicalCvid | read-only | current | Used to identify customer vid of the switched uni port of this entry is associated with. 4095 is not used. 4096 is reserved for untagged case. |
| 1.3.6.1.4.1.2272.1.62.1.1.8 | TablercIpv6PrefixListTable | not-accessible | current | IPv6 Prefix List table |
| 1.3.6.1.4.1.2272.1.62.1.1.8.1 | RowrcIpv6PrefixListEntry | not-accessible | current | An entry of Ipv6 Prefix List Table. |
| 1.3.6.1.4.1.2272.1.62.1.1.8.1.1 | ColumnrcIpv6PrefixListId | not-accessible | current | Id of an IPv6 Prefix List |
| 1.3.6.1.4.1.2272.1.62.1.1.8.1.2 | ColumnrcIpv6PrefixListPrefix | not-accessible | current | Is a member of a specific ipv6 prefix list. Adding the prefix to the given ipv6 prefix list |
| 1.3.6.1.4.1.2272.1.62.1.1.8.1.3 | ColumnrcIpv6PrefixListPrefixMaskLen | not-accessible | current | Mask length of the ipv6 prefix added to the prefix list |
| 1.3.6.1.4.1.2272.1.62.1.1.8.1.4 | ColumnrcIpv6PrefixListMaskLenFrom | read-create | current | Lower bound of mask length of the ipv6 prefix added to the prefix list |
| 1.3.6.1.4.1.2272.1.62.1.1.8.1.5 | ColumnrcIpv6PrefixListMaskLenUpto | read-create | current | Higher bound of mask length of the ipv6 prefix added to the prefix list |
| 1.3.6.1.4.1.2272.1.62.1.1.8.1.6 | ColumnrcIpv6PrefixListName | read-create | current | Name of the Ipv6 prefix list |
| 1.3.6.1.4.1.2272.1.62.1.1.8.1.7 | ColumnrcIpv6PrefixListRowStatus | read-create | current | Used to create/delete entries in the ipv6 prefix list table |
| 1.3.6.1.4.1.2272.1.62.1.1.9 | TablercIpv6ConfDhcpRelayTable | not-accessible | current | DHCP Relay for Ipv6 configuration table |
| 1.3.6.1.4.1.2272.1.62.1.1.9.1 | RowrcIpv6ConfDhcpRelayEntry | not-accessible | current | Used to configure DHCP on a particular L3 interface. An entry is created automatically when the variable rcIpv6InterfaceDhcpEnabled is set to TRUE. Once create… |
| 1.3.6.1.4.1.2272.1.62.1.1.9.1.1 | ColumnrcIpv6ConfDhcpIfIndex | not-accessible | current | Interface number. The number can represent either a physical or logical(VLAN) interface. |
| 1.3.6.1.4.1.2272.1.62.1.1.9.1.2 | ColumnrcIpv6ConfDhcpMaxHop | read-write | current | Used to indicate the maximum number of hops a DHCP packet can take from the source device to the destination device (i.e., DHCP client to DHCP server). |
| 1.3.6.1.4.1.2272.1.62.1.1.9.1.3 | ColumnrcIpv6ConfDhcpRemoteIdEnabled | read-write | current | Used to indicate if remote-id option is enabled. |
| 1.3.6.1.4.1.2272.1.62.1.1.9.1.4 | ColumnrcIpv6ConfDhcpNumRequests | read-only | current | The total number of DHCP requests seen on this interface. |
| 1.3.6.1.4.1.2272.1.62.1.1.9.1.5 | ColumnrcIpv6ConfDhcpNumReplies | read-only | current | The total number of DHCP replies seen on this interface. |
| 1.3.6.1.4.1.2272.1.62.1.1.9.1.6 | ColumnrcIpv6ConfDhcpRowStatus | read-write | current | An entry is created automatically when the variable rcIpv6InterfaceDhcpEnabled is set to TRUE. Once created this entry will only be deleted if the rcIpv6ConfDh… |
| 1.3.6.1.4.1.2272.1.62.1.1.10 | TablercIpv6DhcpForwardTable | not-accessible | current | DHCP Relay forwarding table. |
| 1.3.6.1.4.1.2272.1.62.1.1.10.1 | RowrcIpv6DhcpForwardEntry | not-accessible | current | An entry used represents a DHCP Relayed message forwarding directive. |
| 1.3.6.1.4.1.2272.1.62.1.1.10.1.1 | ColumnrcIpv6DhcpForwardAgentAddr | not-accessible | current | The IP address configured on an interface (i.e., a locally configured IP address). |
| 1.3.6.1.4.1.2272.1.62.1.1.10.1.2 | ColumnrcIpv6DhcpForwardServerAddr | not-accessible | current | The IP address of the DHCP server. If this IP address corresponds to a local interface address, the DHCP packet is multicast out the interface the IP address i… |
| 1.3.6.1.4.1.2272.1.62.1.1.10.1.3 | ColumnrcIpv6DhcpForwardEnabled | read-write | current | Used to indicate whether the entry should be used. |
| 1.3.6.1.4.1.2272.1.62.1.1.10.1.4 | ColumnrcIpv6DhcpForwardRowStatus | read-write | current | Row status of this entry. |
| 1.3.6.1.4.1.2272.1.62.1.1.11 | TablercIpv6RadiusServTable | not-accessible | current | The RADIUS table (0 to 10 entries). This table lists the information of the RADIUS server. |
| 1.3.6.1.4.1.2272.1.62.1.1.11.1 | RowrcIpv6RadiusServEntry | not-accessible | current | A RADIUS server table entry. |
| 1.3.6.1.4.1.2272.1.62.1.1.11.1.1 | ColumnrcIpv6RadiusServAddress | not-accessible | current | Server IP address of the RADIUS authentication server referred to in this table entry. |
| 1.3.6.1.4.1.2272.1.62.1.1.11.1.2 | ColumnrcIpv6RadiusServUsedBy | not-accessible | current | cli(1): for cli login, igap(2): for igap,snmp(3): for snmp login, eap(4) for EAP PAE Authenticator,web(5) for EDM. |
| 1.3.6.1.4.1.2272.1.62.1.1.11.1.3 | ColumnrcIpv6RadiusServPriority | read-create | current | Server priority, used to control which server to choose first to send authentication. |
| 1.3.6.1.4.1.2272.1.62.1.1.11.1.4 | ColumnrcIpv6RadiusServTimeOut | read-create | current | The time interval in seconds before the client retransmit the packet. |
| 1.3.6.1.4.1.2272.1.62.1.1.11.1.5 | ColumnrcIpv6RadiusServEnable | read-create | current | Enable or disable this server. |
| 1.3.6.1.4.1.2272.1.62.1.1.11.1.6 | ColumnrcIpv6RadiusServMaxRetries | read-create | current | Maximum number of retransmissions. |
| 1.3.6.1.4.1.2272.1.62.1.1.11.1.7 | ColumnrcIpv6RadiusServUdpPort | read-create | current | The UDP port the client is using to send requests to this server. |
| 1.3.6.1.4.1.2272.1.62.1.1.11.1.8 | ColumnrcIpv6RadiusServSecretKey | read-create | current | The identifier of the RADIUS authentication client. |
| 1.3.6.1.4.1.2272.1.62.1.1.11.1.9 | ColumnrcIpv6RadiusServAccessRequests | read-only | current | The number of RADIUS access-response packets sent to this server. This does not include retransmissions. |
| 1.3.6.1.4.1.2272.1.62.1.1.11.1.10 | ColumnrcIpv6RadiusServAccessAccepts | read-only | current | The number of RADIUS access-accept packets (valid or invalid) received from this server. |
| 1.3.6.1.4.1.2272.1.62.1.1.11.1.11 | ColumnrcIpv6RadiusServAccessRejects | read-only | current | The number of RADIUS access-reject packets (valid or invalid) received from this server. |
| 1.3.6.1.4.1.2272.1.62.1.1.11.1.12 | ColumnrcIpv6RadiusServBadResponses | read-only | current | The number of RADIUS invalid access-response packets received from this server. |
| 1.3.6.1.4.1.2272.1.62.1.1.11.1.13 | ColumnrcIpv6RadiusServPendingRequests | read-only | current | The number of RADIUS access-request packets destined for this server that have not yet timed out or received a response. This variable is incremented when an a… |
| 1.3.6.1.4.1.2272.1.62.1.1.11.1.14 | ColumnrcIpv6RadiusServClientRetries | read-only | current | The number of authentication retransmission to this server. |
| 1.3.6.1.4.1.2272.1.62.1.1.11.1.15 | ColumnrcIpv6RadiusServAcctEnable | read-create | current | Enable or disable Radius Accounting on this server. |
| 1.3.6.1.4.1.2272.1.62.1.1.11.1.16 | ColumnrcIpv6RadiusServAcctUdpPort | read-create | current | The UDP port the client used to send accounting requests to this server. |
| 1.3.6.1.4.1.2272.1.62.1.1.11.1.17 | ColumnrcIpv6RadiusServAcctOnRequests | read-only | current | The number of RADIUS accounting-on packets sent to this server. This does not include retransmissions. |
| 1.3.6.1.4.1.2272.1.62.1.1.11.1.18 | ColumnrcIpv6RadiusServAcctOffRequests | read-only | current | The number of RADIUS accounting-off packets sent to this server. This does not include retransmissions. |
| 1.3.6.1.4.1.2272.1.62.1.1.11.1.19 | ColumnrcIpv6RadiusServAcctStartRequests | read-only | current | The number of RADIUS accounting-start packets sent to this server. This does not include retransmissions. |
| 1.3.6.1.4.1.2272.1.62.1.1.11.1.20 | ColumnrcIpv6RadiusServAcctStopRequests | read-only | current | The number of RADIUS accounting-stop packets sent to this server. This does not include retransmissions. |
| 1.3.6.1.4.1.2272.1.62.1.1.11.1.21 | ColumnrcIpv6RadiusServAcctInterimRequests | read-only | current | The number of RADIUS accounting-interim packets sent to this server. This does not include retransmissions. |
| 1.3.6.1.4.1.2272.1.62.1.1.11.1.22 | ColumnrcIpv6RadiusServAcctBadResponses | read-only | current | The number of Invalid responses received from this server. |
| 1.3.6.1.4.1.2272.1.62.1.1.11.1.23 | ColumnrcIpv6RadiusServAcctPendingRequests | read-only | current | The number of RADIUS accounting packets that are waiting be sent to this server. This variable is incremented whenever any accounting-request is sent to this s… |
| 1.3.6.1.4.1.2272.1.62.1.1.11.1.24 | ColumnrcIpv6RadiusServAcctClientRetries | read-only | current | The number of RADIUS accounting packets retransmitted to this server. |
| 1.3.6.1.4.1.2272.1.62.1.1.11.1.25 | ColumnrcIpv6RadiusServNasIpAddress | read-only | current | RADIUS Client NAS Identifier for this server. |
| 1.3.6.1.4.1.2272.1.62.1.1.11.1.26 | ColumnrcIpv6RadiusServRoundTripTime | read-only | current | Time different between the instance when a RADIUS request is sent and the corresponding response is received. |
| 1.3.6.1.4.1.2272.1.62.1.1.11.1.27 | ColumnrcIpv6RadiusServAccessChallanges | read-only | current | The number of RADIUS access-challanges packets sent to this server. This does not include retransmission. |
| 1.3.6.1.4.1.2272.1.62.1.1.11.1.28 | ColumnrcIpv6RadiusServSourceIpAddr | read-create | current | source IP address RADIUS packets. |
| 1.3.6.1.4.1.2272.1.62.1.1.11.1.29 | ColumnrcIpv6RadiusServRowStatus | read-create | current | Used to create/delete entries. |
| 1.3.6.1.4.1.2272.1.62.1.1.12 | TablercIpv6MgmtPortStaticRouteTable | not-accessible | current | This table contains list of routes that are created by the user to destination networks on the management port. |
| 1.3.6.1.4.1.2272.1.62.1.1.12.1 | RowrcIpv6MgmtPortStaticRouteEntry | not-accessible | current | An entry in the static route table for IPv6 can be created for a destination with a specific prefix length; multiple entries to the same destination are create… |
| 1.3.6.1.4.1.2272.1.62.1.1.12.1.1 | ColumnrcIpv6MgmtPortStaticRouteIfIndex | not-accessible | current | The ifIndex value which identifies the local interface through which the next hop of this route should be reached. A value of 0 is valid and represents the sce… |
| 1.3.6.1.4.1.2272.1.62.1.1.12.1.2 | ColumnrcIpv6MgmtPortStaticRouteDest | not-accessible | current | The destination IPv6 address of this route. The values for the index objects rcIpv6StaticRouteDest and rcIpv6StaticRoutePrefixLength must be consistent. When t… |
| 1.3.6.1.4.1.2272.1.62.1.1.12.1.3 | ColumnrcIpv6MgmtPortStaticRoutePrefixLength | not-accessible | current | Indicates the number of leading one bits which form the mask to be logical-ANDed with the destination address before being compared to the value in the rcIpv6M… |
| 1.3.6.1.4.1.2272.1.62.1.1.12.1.4 | ColumnrcIpv6MgmtPortStaticRouteNextHop | not-accessible | current | Next hop IPv6 address for this destination. On remote routes, the address of the next system en route. For non-remote routes, a zero length string. |
| 1.3.6.1.4.1.2272.1.62.1.1.12.1.5 | ColumnrcIpv6MgmtPortStaticRouteDistance | read-create | current | cost/distance to reach the destination for this node. |
| 1.3.6.1.4.1.2272.1.62.1.1.12.1.6 | ColumnrcIpv6MgmtPortStaticRouteStatus | read-only | current | (1)notReachable means the route is not reachable and no neighbor request entry is built to resolved the next-hop. It happens when there is no route or neighbor… |
| 1.3.6.1.4.1.2272.1.62.1.1.12.1.7 | ColumnrcIpv6MgmtPortStaticRoutePreference | read-create | current | Used to indicate the route preference of this entry. If there are more than one route that can be used to forward IP traffic, the route that has a highest pref… |
| 1.3.6.1.4.1.2272.1.62.1.1.12.1.8 | ColumnrcIpv6MgmtPortStaticRouteEnable | read-create | current | Used to enable/disable this entry. |
| 1.3.6.1.4.1.2272.1.62.1.1.12.1.9 | ColumnrcIpv6MgmtPortStaticRouteRowStatus | read-create | current | Row status for create/delete. |
| 1.3.6.1.4.1.2272.1.62.1.1.13 | TablercIpv6DestinationCacheTable | not-accessible | current | Ipv6 Destination Cache table |
| 1.3.6.1.4.1.2272.1.62.1.1.13.1 | RowrcIpv6DestinationCacheEntry | not-accessible | current | Used to display Destination Cache |
| 1.3.6.1.4.1.2272.1.62.1.1.13.1.1 | ColumnrcIpv6DCacheDestAddr | not-accessible | current | IPv6 Destination Address from the Destination Cache. |
| 1.3.6.1.4.1.2272.1.62.1.1.13.1.2 | ColumnrcIpv6DCacheIfIndex | not-accessible | current | The last 16 bits of this object's value are interpreted as InterfaceIndex (it can represent either a physical, or a VLAN, or a tunnel interface); the first 16 … |
| 1.3.6.1.4.1.2272.1.62.1.1.13.1.3 | ColumnrcIpv6DCacheNextHop | read-only | current | Ipv6 Next Hop for a Destination Cache entry. |
| 1.3.6.1.4.1.2272.1.62.1.1.13.1.4 | ColumnrcIpv6DCacheIfType | read-only | current | Interface type; it can be a real (i.e. VLAN, brouter, tunnel) or a virtual circuit (i.e. VRRP, RSMLT). |
| 1.3.6.1.4.1.2272.1.62.1.1.13.1.5 | ColumnrcIpv6DCacheIfData | read-only | current | Used to display additional information about virtual circuits (i.e. if it is a VRRP or RSMLT circuit, the vrId if it is a VRRP circuit); no information is disp… |
| 1.3.6.1.4.1.2272.1.62.1.1.13.1.6 | ColumnrcIpv6DCachePmtu | read-only | current | Path MTU for the entry. |
| 1.3.6.1.4.1.2272.1.62.1.1.13.1.7 | ColumnrcIpv6DCachePmtuAge | read-only | current | Indicates how much time (in seconds) has passed since the PMTU was updated the last time. |
| 1.3.6.1.4.1.2272.1.62.1.1.14 | TablercIpv6InterfaceBfdTable | not-accessible | current | BFD configuration table |
| 1.3.6.1.4.1.2272.1.62.1.1.14.1 | RowrcIpv6InterfaceBfdEntry | not-accessible | current | Used to configure BFD on a particular interface. An entry is created automatically when the variable rcIpv6InterfaceBfdEnable is set to TRUE and deleted when r… |
| 1.3.6.1.4.1.2272.1.62.1.1.14.1.1 | ColumnrcIpv6InterfaceBfdIfIndex | not-accessible | current | Interface number. The number can represent either a physical or logical(VLAN) interface. |
| 1.3.6.1.4.1.2272.1.62.1.1.14.1.2 | ColumnrcIpv6InterfaceBfdMinRxInterval | read-write | current | the min rx interval in milliseconds |
| 1.3.6.1.4.1.2272.1.62.1.1.14.1.3 | ColumnrcIpv6InterfaceBfdTxInterval | read-write | current | the desired tx interval in milliseconds |
| 1.3.6.1.4.1.2272.1.62.1.1.14.1.4 | ColumnrcIpv6InterfaceBfdMultiplier | read-write | current | the multiplier BFD wait before rx timeout |
| 1.3.6.1.4.1.2272.1.62.1.1.14.1.6 | ColumnrcIpv6InterfaceBfdHoldOffInterval | read-write | current | This object specifies the hold off timer interval, in seconds. 0 means that hold off timer is disabled. |
| 1.3.6.1.4.1.2272.1.62.1.1.14.1.7 | ColumnrcIpv6InterfaceBfdStaticFlag | read-write | current | This object specifies the static-flag for bfd. When disabled, the static route will go down, when bfd is disabled. |
| 1.3.6.1.4.1.2272.1.62.1.1.15 | TablercIpv6RouteTable | not-accessible | current | This entity's IPV6 Routing table. |
| 1.3.6.1.4.1.2272.1.62.1.1.15.1 | RowrcIpv6RouteEntry | not-accessible | current | A route to a particular destination. |
| 1.3.6.1.4.1.2272.1.62.1.1.15.1.1 | ColumnrcIpv6RouteDest | not-accessible | current | The destination IPv6 address of this route. This object may not take a Multicast address value. |
| 1.3.6.1.4.1.2272.1.62.1.1.15.1.2 | ColumnrcIpv6RoutePfxLength | not-accessible | current | Indicates the prefix length of the destination address. |
| 1.3.6.1.4.1.2272.1.62.1.1.15.1.3 | ColumnrcIpv6RouteIndex | not-accessible | current | The value which uniquely identifies the route among the routes to the same network layer destination. The way this value is chosen is implementation specific b… |
| 1.3.6.1.4.1.2272.1.62.1.1.15.1.4 | ColumnrcIpv6RouteNextHopId | read-only | current | Identifier of the next-hop, hostname or mac adress. |
| 1.3.6.1.4.1.2272.1.62.1.1.16 | TablercIpv6DefaultRoutersTable | not-accessible | current | IPv6 Default Routers Table. |
| 1.3.6.1.4.1.2272.1.62.1.1.16.1 | RowrcIpv6DefaultRoutersEntry | not-accessible | current | The entry for the IPv6 Default Routers Table. |
| 1.3.6.1.4.1.2272.1.62.1.1.16.1.1 | ColumnrcIpv6DefaultRoutersAddress | not-accessible | current | Learned Router Address for an IPv6 Default Routers Entry. |
| 1.3.6.1.4.1.2272.1.62.1.1.16.1.2 | ColumnrcIpv6DefaultRoutersIfIndex | not-accessible | current | Interface number for an IPv6 Default Routers Entry. |
| 1.3.6.1.4.1.2272.1.62.1.1.16.1.3 | ColumnrcIpv6DefaultRoutersLifetime | read-only | current | Remaining Router Lifetime for an IPv6 Default Routers Entry. |
| 1.3.6.1.4.1.2272.1.62.1.1.16.1.4 | ColumnrcIpv6DefaultRoutersActive | read-only | current | See if a default router is active for an IPv6 Default Routers Entry. |
| 1.3.6.1.4.1.2272.1.62.1.1.17 | TablercIpv6MLDHostCacheTable | not-accessible | current | IPv6 MLD Host Cache Table. |
| 1.3.6.1.4.1.2272.1.62.1.1.17.1 | RowrcIpv6MLDHostCacheEntry | not-accessible | current | The entry for the IPv6 MLD Host Cache Table. |
| 1.3.6.1.4.1.2272.1.62.1.1.17.1.1 | ColumnrcIpv6MLDHostCacheIfIndex | not-accessible | current | Interface number for an IPv6 MLD Host Cache Entry. |
| 1.3.6.1.4.1.2272.1.62.1.1.17.1.2 | ColumnrcIpv6MLDHostCacheGrpAddress | not-accessible | current | Group Address for an IPv6 MLD Host Cache Entry. |
| 1.3.6.1.4.1.2272.1.62.1.1.17.1.3 | ColumnrcIpv6MLDHostCacheGrpLocallyRegistered | read-only | current | Group Locally Registered for an IPv6 MLD Host Cache Entry. |
| 1.3.6.1.4.1.2272.1.62.1.1.17.1.4 | ColumnrcIpv6MLDHostCacheGrpLastReporter | read-only | current | Group Last Reporter Address for an IPv6 MLD Host Cache Entry. |
| 1.3.6.1.4.1.2272.1.62.1.1.17.1.5 | ColumnrcIpv6MLDHostCacheGrpUpTime | read-only | current | Group Uptime for an IPv6 MLD Host Cache Entry. |
| 1.3.6.1.4.1.2272.1.62.1.1.17.1.6 | ColumnrcIpv6MLDHostCacheGrpExpiryTime | read-only | current | Group Expiry Time for an IPv6 MLD Host Cache Entry. |
| 1.3.6.1.4.1.2272.1.62.1.1.17.1.7 | ColumnrcIpv6MLDHostCacheGrpFilterMode | read-only | current | Group Filter Mode for an IPv6 MLD Host Cache Entry. |
| 1.3.6.1.4.1.2272.1.62.1.1.18 | TablercTunnelXInetConfigTable | not-accessible | current | A table that containing information on configured tunnels. |
| 1.3.6.1.4.1.2272.1.62.1.1.18.1 | RowrcTunnelXInetConfigEntry | not-accessible | current | An entry containing additional tunnel information. This object augments tunnelInetConfigEntry. |
| 1.3.6.1.4.1.2272.1.62.1.1.18.1.1 | ColumnrcTunnelXInetConfigStatus | read-create | current | Indicates the tunnel status |
| 1.3.6.1.4.1.2272.1.62.1.1.18.1.2 | ColumnrcTunnelXInetConfigMode | read-create | current | Indicates the tunnel mode |
| 1.3.6.1.4.1.2272.1.62.1.1.19 | TablercIpv6RouteExtensionTable | not-accessible | current | This entity's IPV6 Routing table. |
| 1.3.6.1.4.1.2272.1.62.1.1.19.1 | RowrcIpv6RouteExtensionEntry | not-accessible | current | A route to a particular destination. |
| 1.3.6.1.4.1.2272.1.62.1.1.19.1.1 | ColumnrcIpv6RouteExtensionNextHopId | read-only | current | Identifier of the next-hop, hostname or mac adress. |
| 1.3.6.1.4.1.2272.1.62.1.1.19.1.2 | ColumnrcIpv6RouteExtensionProtocol | read-only | current | The routing mechanism via which this route was learned. |
| 1.3.6.1.4.1.2272.1.62.1.1.19.1.3 | ColumnrcIpv6RouteExtensionPathType | read-only | current | Indicates IPv6 route path type: best, alternative, ECMP. |
| 1.3.6.1.4.1.2272.1.62.1.1.20 | TablercIpv6RoutePrefTable | not-accessible | current | IPv6 Route Pref table. This table and rcIpNewRoutePrefTable is designed to obsolete the rcIpRoutePrefTable |
| 1.3.6.1.4.1.2272.1.62.1.1.20.1 | RowrcIpv6RoutePrefEntry | not-accessible | current | An entry of Ipv6 Route Pref Table. |
| 1.3.6.1.4.1.2272.1.62.1.1.20.1.1 | ColumnrcIpv6RoutePrefDefaultValue | not-accessible | current | Shows the default preference value for the given protocol. |
| 1.3.6.1.4.1.2272.1.62.1.1.20.1.2 | ColumnrcIpv6RoutePrefProtocol | read-only | current | Protocol name |
| 1.3.6.1.4.1.2272.1.62.1.1.20.1.3 | ColumnrcIpv6RoutePrefConfiguredValue | read-write | current | This value is configurable by the user |
| 1.3.6.1.4.1.2272.1.62.1.1.21 | TablercIpv6FhsSnoopTable | not-accessible | current | This table contains the entries which are snooped by different methods. |
| 1.3.6.1.4.1.2272.1.62.1.1.21.1 | RowrcIpv6FhsSnoopEntry | not-accessible | current | An entry containing a learned DHCPv6 binding. |
| 1.3.6.1.4.1.2272.1.62.1.1.21.1.1 | ColumnrcIpv6FhsSnoopVlanId | not-accessible | current | The VLAN to which the snooped entry belongs. |
| 1.3.6.1.4.1.2272.1.62.1.1.21.1.2 | ColumnrcIpv6FhsSnoopIpv6Address | not-accessible | current | The IPv6 address assigned to this IPv6 host. |
| 1.3.6.1.4.1.2272.1.62.1.1.21.1.3 | ColumnrcIpv6FhsSnoopMacAddress | read-create | current | The MAC address of the snooped entry. |
| 1.3.6.1.4.1.2272.1.62.1.1.21.1.4 | ColumnrcIpv6FhsSnoopInterfaceIndex | read-create | current | The interface to which the entry is learnt. |
| 1.3.6.1.4.1.2272.1.62.1.1.21.1.5 | ColumnrcIpv6FhsSnoopEntryType | read-only | current | Indicates the type of entry - static (1) or dynamic (2). |
| 1.3.6.1.4.1.2272.1.62.1.1.21.1.6 | ColumnrcIpv6FhsSnoopEntrySource | read-only | current | Indicates the method entry was learnt from - static (1) or dhcp (2). |
| 1.3.6.1.4.1.2272.1.62.1.1.21.1.7 | ColumnrcIpv6FhsSnoopValidTime | read-only | current | The valid time for the snooped entry. |
| 1.3.6.1.4.1.2272.1.62.1.1.21.1.8 | ColumnrcIpv6FhsSnoopTimeToExpiry | read-only | current | The time to expiry of the snooped entry. |
| 1.3.6.1.4.1.2272.1.62.1.1.21.1.9 | ColumnrcIpv6FhsSnoopRowStatus | read-create | current | Row status to create/delete snooped entries. |
| 1.3.6.1.4.1.2272.1.62.1.1.22 | NodercIpv6FhsSnoopNotificationObjects | |||
| 1.3.6.1.4.1.2272.1.62.1.1.22.1 | ScalarrcIpv6FhsSnoopNotificationEntryType | accessible-for-notify | current | This value indicates type of binding entry. static (1) entries are created by administrator manually whereas dynamic (2) entries are learnt through snooping. |
| 1.3.6.1.4.1.2272.1.62.1.1.22.2 | ScalarrcIpv6FhsSnoopNotificationEntryCount | accessible-for-notify | current | This value indicates current number of binding entries of type rcIpv6FhsSnoopingNotificationEntryType |
| 1.3.6.1.4.1.2272.1.63 | NodercIsis | |||
| 1.3.6.1.4.1.2272.1.63.1 | NodercIsisGlobalGroup | |||
| 1.3.6.1.4.1.2272.1.63.1.1 | ScalarrcIsisGlobalAreaAuthType | read-write | current | The authentication type for the area |
| 1.3.6.1.4.1.2272.1.63.1.2 | ScalarrcIsisGlobalAreaKeyId | read-write | current | Authentication key-id for the area. This is required if the auth-type is hmac-md5 else it is not required. |
| 1.3.6.1.4.1.2272.1.63.1.3 | ScalarrcIsisGlobalAreaAuthKey | read-write | current | Authentication key, this key will be used to authenticate the LSP's received on the area |
| 1.3.6.1.4.1.2272.1.63.1.4 | ScalarrcIsisGlobalDomainAuthType | read-write | current | The authentication type for the domain |
| 1.3.6.1.4.1.2272.1.63.1.5 | ScalarrcIsisGlobalDomainKeyId | read-write | current | The authentication key-id for the domain. This is required if the auth-type is hmac-md5 else it is not required. |
| 1.3.6.1.4.1.2272.1.63.1.6 | ScalarrcIsisGlobalDomainAuthKey | read-write | current | Authentication key, this key will be used to authenticate the LSP's received on the domain |
| 1.3.6.1.4.1.2272.1.63.1.7 | ScalarrcIsisGlobalCsnpInt | read-write | current | Interval of time, in seconds, between periodic transmission of a complete set of CSNPs on multiaccess networks if this router is the designated router at this … |
| 1.3.6.1.4.1.2272.1.63.1.8 | ScalarrcIsisGlobalRxmtLspInt | read-write | current | Minimum interval, in seconds, between re-transmission of a LSP at this level. This object follows the resettingTimer behavior. For ResettingTimer description s… |
| 1.3.6.1.4.1.2272.1.63.1.9 | ScalarrcIsisGlobalPSNPInterval | read-write | current | Minimum interval in seconds between sending Partial Sequence Number PDUs at this level. This object follows the resettingTimer behavior. For ResettingTimer des… |
| 1.3.6.1.4.1.2272.1.63.1.10 | ScalarrcIsisGlobalHostName | read-write | current | The hostname listed in LSP, or the system name if host name is not configured. |
| 1.3.6.1.4.1.2272.1.63.1.11 | ScalarrcIsisGlobalSpfDelay | read-write | current | ISIS SPF delay in miliseconds |
| 1.3.6.1.4.1.2272.1.63.1.12 | ScalarrcIsisGlobalControlVlan | read-write | current | ISIS control vlan ID |
| 1.3.6.1.4.1.2272.1.63.1.13 | ScalarrcIsisGlobalIpSourceAddress | read-write | current | ISIS PLSB IP address. Define an existing router interface for management (ping/traceroute) |
| 1.3.6.1.4.1.2272.1.63.1.14 | ScalarrcIsisGlobalIpSourceAddressType | read-write | current | The type of address for existing router interface for management (ping/traceroute) |
| 1.3.6.1.4.1.2272.1.63.1.15 | ScalarrcIsisGlobalIpv6SourceAddress | read-write | current | ISIS PLSB IPv6 address. Define an existing router interface for management (ping/traceroute) |
| 1.3.6.1.4.1.2272.1.63.1.16 | ScalarrcIsisGlobalIpv6SourceAddressType | read-write | current | The type of address for existing router interface for management (ping/traceroute) |
| 1.3.6.1.4.1.2272.1.63.1.17 | ScalarrcIsisGlobalIpTunnelSourceAddress | read-write | current | ISIS IP tunnel source address |
| 1.3.6.1.4.1.2272.1.63.1.18 | ScalarrcIsisGlobalIpTunnelPort | read-write | current | Port associated with the IP tunnel |
| 1.3.6.1.4.1.2272.1.63.1.19 | ScalarrcIsisGlobalIpTunnelVrf | read-write | current | VRF name associated with the IP tunnel |
| 1.3.6.1.4.1.2272.1.63.1.20 | ScalarrcIsisGlobalIpTunnelMtu | read-write | current | The value specifies the logical tunnel MTU |
| 1.3.6.1.4.1.2272.1.63.1.21 | ScalarrcIsisGlobalMgmtIpAddr | read-write | current | Inband management IPv4 address and can be used by both DVR and non DVR enabled nodes. |
| 1.3.6.1.4.1.2272.1.63.1.22 | ScalarrcIsisGlobalBackboneEnable | read-write | current | Allow a non DVR BEB to join the DVR backbone tree in order to receive redistributed DVR Host Routes from all the different DVR Controllers in the SPB Network. |
| 1.3.6.1.4.1.2272.1.63.2 | TablercIsisCircuitTable | not-accessible | current | Table of IS-IS Circuit, this is extension to the isisCircTable defined in ISIS MIB |
| 1.3.6.1.4.1.2272.1.63.2.1 | RowrcIsisCircuitEntry | not-accessible | current | An entry of rcIsisCircuit Table. A Entry in table exists for each ISIS circuit created |
| 1.3.6.1.4.1.2272.1.63.2.1.1 | ColumnrcIsisCircuitIndex | not-accessible | current | The identifier of this circuit, unique within the Intermediate System. This object follows the index behavior. This is for SNMP Indexing purposes only and need… |
| 1.3.6.1.4.1.2272.1.63.2.1.2 | ColumnrcIsisCircuitType | read-write | current | ISIS circuit type this is an extention to ISIS circuit table, this was required a standard MIB circuit type does not support passive type |
| 1.3.6.1.4.1.2272.1.63.2.1.3 | ColumnrcIsisCircuitAuthType | read-write | current | Authentication type for IIH to be sent/reveived on the circuit/interface |
| 1.3.6.1.4.1.2272.1.63.2.1.4 | ColumnrcIsisCircuitKeyId | read-write | current | Authentication key id related to IIH key This can be set only if the auth-type is hmac-md5 |
| 1.3.6.1.4.1.2272.1.63.2.1.5 | ColumnrcIsisCircuitAuthKey | read-write | current | Authentication key to be used to authenticate IIH sent/reveived on the circuit/interface |
| 1.3.6.1.4.1.2272.1.63.2.1.6 | ColumnrcIsisCircuitAddr | read-only | current | IP address associated with the interface |
| 1.3.6.1.4.1.2272.1.63.2.1.7 | ColumnrcIsisCircuitMask | read-only | current | IP mask associated with the interface |
| 1.3.6.1.4.1.2272.1.63.2.1.8 | ColumnrcIsisCircuitOperState | read-only | current | This variable tells the operating state of circ |
| 1.3.6.1.4.1.2272.1.63.2.1.9 | ColumnrcIsisCircuitNumAdj | read-only | current | Number of adjacencies |
| 1.3.6.1.4.1.2272.1.63.2.1.10 | ColumnrcIsisCircuitNumUpAdj | read-only | current | Number of adjancencies which are UP |
| 1.3.6.1.4.1.2272.1.63.3 | NodercIsisStats | |||
| 1.3.6.1.4.1.2272.1.63.3.1 | ScalarrcIsisStatsClearErrorCounters | read-write | current | Clear ISIS global and interface error counters. |
| 1.3.6.1.4.1.2272.1.63.3.2 | ScalarrcIsisStatsClearPacketCounters | read-write | current | Clear IS-IS control packets sent and received at each level on all the interface/circuits. |
| 1.3.6.1.4.1.2272.1.63.4 | TablercIsisPlsbTable | not-accessible | current | Table of PLSB under IS-IS |
| 1.3.6.1.4.1.2272.1.63.4.1 | RowrcIsisPlsbEntry | not-accessible | current | An entry of rcIsisPlsb Table. A Entry in table exists for each plsb instance created |
| 1.3.6.1.4.1.2272.1.63.4.1.1 | ColumnrcIsisPlsbId | not-accessible | current | PLSB instance ID |
| 1.3.6.1.4.1.2272.1.63.4.1.2 | ColumnrcIsisPlsbRowStatus | read-create | current | The state of the rcIsisPlsbEntry. |
| 1.3.6.1.4.1.2272.1.63.4.1.3 | ColumnrcIsisPlsbNodeNickName | read-create | current | PLSB node's nickname is used to calculate ISID multicast mac address. |
| 1.3.6.1.4.1.2272.1.63.4.1.4 | ColumnrcIsisPlsbVlans | read-create | current | PLSB ISIS vlans for a PLSB instance. |
| 1.3.6.1.4.1.2272.1.63.4.1.5 | ColumnrcIsisPlsbLsdbTrap | read-create | current | isis PLSB lsdb update trap enable on this plsb instance |
| 1.3.6.1.4.1.2272.1.63.4.1.6 | ColumnrcIsisPlsbState | read-create | current | enable/disable PLSB. |
| 1.3.6.1.4.1.2272.1.63.4.1.7 | ColumnrcIsisPlsbIpShortcut | read-create | current | ISIS PLSB IP shortcut enabled |
| 1.3.6.1.4.1.2272.1.63.4.1.8 | ColumnrcIsisPlsbPrimaryVlan | read-create | current | Primary Vlan Id for this plsb instance. |
| 1.3.6.1.4.1.2272.1.63.4.1.9 | ColumnrcIsisPlsbSmltSplitBEB | read-only | current | ISIS PLSB SMLT split BEB for this plsb instance. |
| 1.3.6.1.4.1.2272.1.63.4.1.10 | ColumnrcIsisPlsbSmltBmac | read-create | current | ISIS PLSB SMLT virtual MAC for this plsb instance. |
| 1.3.6.1.4.1.2272.1.63.4.1.11 | ColumnrcIsisPlsbSmltPeerSysId | read-create | current | ISIS PLSB SMLT Peer's system-id for this plsb instance. |
| 1.3.6.1.4.1.2272.1.63.4.1.12 | ColumnrcIsisPlsbMcast | read-create | current | ISIS PLSB Multicast enable |
| 1.3.6.1.4.1.2272.1.63.4.1.13 | ColumnrcIsisPlsbMcastFwdCacheTimeout | read-create | current | Multicast Fwd Cache Timeout in seconds |
| 1.3.6.1.4.1.2272.1.63.4.1.14 | ColumnrcIsisPlsbIpv6Shortcut | read-create | current | ISIS PLSB IPv6 shortcut enabled |
| 1.3.6.1.4.1.2272.1.63.4.1.15 | ColumnrcIsisPlsbMcastSpbPimGwControllerEnable | read-create | current | ISIS PLSB Multicast SPB PIM Gateway controller enable/disable. |
| 1.3.6.1.4.1.2272.1.63.4.1.16 | ColumnrcIsisPlsbMcastSpbPimGwGatewayEnable | read-create | current | ISIS PLSB Multicast SPB PIM Gateway enable/disable. |
| 1.3.6.1.4.1.2272.1.63.5 | TablercIsisCircuitPlsbTable | not-accessible | current | Table of IS-IS Circuit PLSB instance |
| 1.3.6.1.4.1.2272.1.63.5.1 | RowrcIsisCircuitPlsbEntry | not-accessible | current | An entry of rcIsisCircuitPlsb Table. A Entry in table exists for each PLSB instance under a ISIS circuit created |
| 1.3.6.1.4.1.2272.1.63.5.1.1 | ColumnrcIsisCircuitPlsbIndex | not-accessible | current | The identifier of this circuit, unique within the Intermediate System. This object follows the index behavior. This is for SNMP Indexing purposes only and need… |
| 1.3.6.1.4.1.2272.1.63.5.1.2 | ColumnrcIsisCircuitPlsbId | not-accessible | current | PLSB instance ID |
| 1.3.6.1.4.1.2272.1.63.5.1.3 | ColumnrcIsisCircuitPlsbRowStatus | read-create | current | The state of the rcIsisCircuitPlsbEntry. |
| 1.3.6.1.4.1.2272.1.63.5.1.4 | ColumnrcIsisCircuitPlsbState | read-create | current | PLSB functionality enable on this Plsb instance at this port |
| 1.3.6.1.4.1.2272.1.63.5.1.5 | ColumnrcIsisCircuitPlsbType | read-create | current | ISIS circuit type this is an extention to ISIS circuit table, this was required a standard MIB circuit type does not support passive type |
| 1.3.6.1.4.1.2272.1.63.5.1.6 | ColumnrcIsisCircuitPlsbL1Metric | read-create | current | The metric value of this circuit for this level. |
| 1.3.6.1.4.1.2272.1.63.5.1.7 | ColumnrcIsisCircuitPlsbWideL1Metric | read-create | current | The metric value of this circuit for this level. |
| 1.3.6.1.4.1.2272.1.63.6 | TablercIsisPlsbUnicastFibTable | not-accessible | obsolete | Table of IS-IS PLSB Unicast FIB |
| 1.3.6.1.4.1.2272.1.63.6.1 | RowrcIsisPlsbUnicastFibEntry | not-accessible | obsolete | An entry of rcIsisPlsbUnicastFib Table. A Entry in table exists for each PLSB unicast forwarding entry generated by ISIS SPF computation |
| 1.3.6.1.4.1.2272.1.63.6.1.1 | ColumnrcIsisPlsbUnicastFibDestinationMacAddr | not-accessible | obsolete | Destination Mac Address of the unicast FIB entry |
| 1.3.6.1.4.1.2272.1.63.6.1.2 | ColumnrcIsisPlsbUnicastFibVlan | not-accessible | obsolete | Vlan of the unicast FIB entry |
| 1.3.6.1.4.1.2272.1.63.6.1.3 | ColumnrcIsisPlsbUnicastFibSysId | not-accessible | obsolete | System ID of the node where unicast FIB entry come from |
| 1.3.6.1.4.1.2272.1.63.6.1.4 | ColumnrcIsisPlsbUnicastFibOutgoingPort | read-only | obsolete | Outgoing port of the unicast Fib entry. |
| 1.3.6.1.4.1.2272.1.63.7 | TablercIsisPlsbMulticastFibTable | not-accessible | obsolete | Table of IS-IS PLSB Multicast FIB |
| 1.3.6.1.4.1.2272.1.63.7.1 | RowrcIsisPlsbMulticastFibEntry | not-accessible | obsolete | An entry of rcIsisPlsbmulticastFib Table. A Entry in table exists for each PLSB Multicast forwarding entry generated by ISIS SPF computation |
| 1.3.6.1.4.1.2272.1.63.7.1.1 | ColumnrcIsisPlsbMulticastFibMcastDestMacAddr | not-accessible | obsolete | Multicast destination Mac Address of the multicast FIB entry |
| 1.3.6.1.4.1.2272.1.63.7.1.2 | ColumnrcIsisPlsbMulticastFibVlan | not-accessible | obsolete | Vlan of the multicast FIB entry |
| 1.3.6.1.4.1.2272.1.63.7.1.3 | ColumnrcIsisPlsbMulticastFibSysId | not-accessible | obsolete | System ID of the node where multicast FIB entry come from |
| 1.3.6.1.4.1.2272.1.63.7.1.4 | ColumnrcIsisPlsbMulticastFibIsid | read-only | obsolete | Isid id of the multicast FIB entry |
| 1.3.6.1.4.1.2272.1.63.7.1.5 | ColumnrcIsisPlsbMulticastFibOutgoingPorts | read-only | obsolete | Nni port of the multicast Fib entry. |
| 1.3.6.1.4.1.2272.1.63.8 | TablercIsisPlsbIsidTable | not-accessible | obsolete | Table of IS-IS PLSB ISID |
| 1.3.6.1.4.1.2272.1.63.8.1 | RowrcIsisPlsbIsidEntry | not-accessible | obsolete | An entry of rcIsisPlsbIsid Table. A Entry in table exists for each PLSB i-sid configed or discovered by IS-IS |
| 1.3.6.1.4.1.2272.1.63.8.1.1 | ColumnrcIsisPlsbIsidSourceName | not-accessible | obsolete | nick name of node where this i-sid got configed or discovered |
| 1.3.6.1.4.1.2272.1.63.8.1.2 | ColumnrcIsisPlsbIsidId | not-accessible | obsolete | IS-IS PLSB Isid id |
| 1.3.6.1.4.1.2272.1.63.8.1.3 | ColumnrcIsisPlsbIsidSysId | not-accessible | obsolete | System ID of the node where multicast FIB entry come from |
| 1.3.6.1.4.1.2272.1.63.8.1.4 | ColumnrcIsisPlsbIsidType | read-only | obsolete | PLSB i-sid type |
| 1.3.6.1.4.1.2272.1.63.9 | NodercIsisTrap | |||
| 1.3.6.1.4.1.2272.1.63.9.1 | ScalarrcIsisLocalLspId | read-only | current | The 8 byte Local LSP ID, consisting of the SystemID, Circuit ID, and Fragment Number. |
| 1.3.6.1.4.1.2272.1.63.9.2 | ScalarrcIsisLocall1Metric | read-only | current | l1-metric for ISIS interface on local Node. |
| 1.3.6.1.4.1.2272.1.63.9.3 | ScalarrcIsisNgbLspId | read-only | current | The 8 byte neighbor LSP ID, consisting of the SystemID, Circuit ID, and Fragment Number. |
| 1.3.6.1.4.1.2272.1.63.9.4 | ScalarrcIsisNgbl1Metric | read-only | current | l1-metric for ISIS interface on neighbor Node. |
| 1.3.6.1.4.1.2272.1.63.9.5 | ScalarrcIsisPlsbTrapType | read-only | current | |
| 1.3.6.1.4.1.2272.1.63.9.6 | ScalarrcIsisLocalSysId | read-only | current | ISIS local node system-id. |
| 1.3.6.1.4.1.2272.1.63.9.7 | ScalarrcIsisLocalInterface | read-only | current | ISIS local interface index. |
| 1.3.6.1.4.1.2272.1.63.9.8 | ScalarrcIsisTrapIndicator | read-only | current | indicates that an alarm has been Raised, or an alarm has been cleared. |
| 1.3.6.1.4.1.2272.1.63.9.9 | ScalarrcIsisLocalNickname | read-only | current | ISIS local node nick-name. |
| 1.3.6.1.4.1.2272.1.63.9.10 | ScalarrcIsisNgbNickname | read-only | current | ISIS neighbor node nick-name. |
| 1.3.6.1.4.1.2272.1.63.9.11 | ScalarrcIsisNgbSysId | read-only | current | ISIS neighbor node system-id. |
| 1.3.6.1.4.1.2272.1.63.9.12 | ScalarrcIsisLocalPrimaryBvid | read-only | current | ISIS local primary B-VID. |
| 1.3.6.1.4.1.2272.1.63.9.13 | ScalarrcIsisLocalPrimaryTieBrkAlg | read-only | current | The tie breaking algorithm applied to local primary B-VID. |
| 1.3.6.1.4.1.2272.1.63.9.14 | ScalarrcIsisLocalSecondaryBvid | read-only | current | ISIS local secondary B-VID. |
| 1.3.6.1.4.1.2272.1.63.9.15 | ScalarrcIsisLocalSecondaryTieBrkAlg | read-only | current | The tie breaking algorithm applied to local seconday B-VID. |
| 1.3.6.1.4.1.2272.1.63.9.16 | ScalarrcIsisNgbPrimaryBvid | read-only | current | ISIS neighbor primary B-VID. |
| 1.3.6.1.4.1.2272.1.63.9.17 | ScalarrcIsisNgbPrimaryTieBrkAlg | read-only | current | The neighbor tie breaking algorithm applied to primary B-VID. |
| 1.3.6.1.4.1.2272.1.63.9.18 | ScalarrcIsisNgbSecondaryBvid | read-only | current | ISIS neighbor secondary B-VID. |
| 1.3.6.1.4.1.2272.1.63.9.19 | ScalarrcIsisNgbSecondaryTieBrkAlg | read-only | current | The neighbor tie breaking algorithm applied to secondary B-VID. |
| 1.3.6.1.4.1.2272.1.63.9.20 | ScalarrcIsisLocalVirtualBmac | read-only | current | The SMLT Virtual BMAC configured in the local IST switch. |
| 1.3.6.1.4.1.2272.1.63.9.21 | ScalarrcIsisPeerVirtualBmac | read-only | current | The SMLT Virtual BMAC configured in the IST Peer. |
| 1.3.6.1.4.1.2272.1.63.9.22 | ScalarrcIsisSysId | read-only | current | The isis system id configured in the local switch or IST peer. |
| 1.3.6.1.4.1.2272.1.63.9.23 | ScalarrcIsisSmltPeerSysId | read-only | current | The SMLT Peer system-id configured in the local switch or IST Peer. |
| 1.3.6.1.4.1.2272.1.63.9.24 | ScalarrcIsisAdjState | read-only | current | indicate different ISIS adjacency states. |
| 1.3.6.1.4.1.2272.1.63.9.25 | ScalarrcIsisDuplicateNnameCounter | read-only | current | indicate how many nodes in the network share the nick-name. |
| 1.3.6.1.4.1.2272.1.63.9.26 | ScalarrcIsisLocalBvidCounter | read-only | current | indicate how many b-vid configured on local nodes. |
| 1.3.6.1.4.1.2272.1.63.9.27 | ScalarrcIsisNgbBvidCounter | read-only | current | indicate how many b-vid configured on a neighbor nodes. |
| 1.3.6.1.4.1.2272.1.63.9.28 | ScalarrcIsisLocalSmltSplitBeb | read-only | current | The SMLT Split-BEB configured in the local IST switch. |
| 1.3.6.1.4.1.2272.1.63.9.29 | ScalarrcIsisPeerSmltSplitBeb | read-only | current | The SMLT Split-BEB configured in the IST Peer switch. |
| 1.3.6.1.4.1.2272.1.63.9.30 | ScalarrcIsisLocalHostName | read-only | current | ISIS local host name. |
| 1.3.6.1.4.1.2272.1.63.9.31 | ScalarrcIsisNgbHostName | read-only | current | ISIS neighbor host name. |
| 1.3.6.1.4.1.2272.1.63.9.32 | ScalarrcIsisPrevInterface | read-only | current | ISIS local interface index for previously found adj. |
| 1.3.6.1.4.1.2272.1.63.9.33 | ScalarrcIsisSmltVirtBmacMisconfigNodeHostName | accessible-for-notify | current | ISIS host name of node that misconfigured SMLT virtual BMAC. |
| 1.3.6.1.4.1.2272.1.63.9.34 | ScalarrcIsisSmltVirtBmacMisconfigNodeSysId | accessible-for-notify | current | ISIS system-id of node that misconfigured SMLT virtual BMAC. |
| 1.3.6.1.4.1.2272.1.63.9.35 | ScalarrcIsisLocalChassisMac | accessible-for-notify | current | ISIS local node chassis mac. |
| 1.3.6.1.4.1.2272.1.63.9.36 | ScalarrcIsisRemoteChassisMac | accessible-for-notify | current | Chassis MAC address of the remote ISIS node. |
| 1.3.6.1.4.1.2272.1.63.9.37 | ScalarrcIsisRemoteHostName | accessible-for-notify | current | ISIS host name of the remote node. |
| 1.3.6.1.4.1.2272.1.63.9.38 | ScalarrcIsisPreviousSysId | accessible-for-notify | current | Previously used ISIS System-Id. |
| 1.3.6.1.4.1.2272.1.63.10 | TablercIsisAdjTable | not-accessible | current | Table of IS-IS Adjacency, this is extension to the isisISAdjTable defined in ISIS MIB |
| 1.3.6.1.4.1.2272.1.63.10.1 | RowrcIsisAdjEntry | not-accessible | current | An entry of rcIsisAdj Table. A Entry in table exists for each ISIS adjacency |
| 1.3.6.1.4.1.2272.1.63.10.1.1 | ColumnrcIsisAdjCircIndex | not-accessible | current | The identifier of this circuit, unique within the Intermediate System. This object follows the index behavior. This is for SNMP Indexing purposes only and need… |
| 1.3.6.1.4.1.2272.1.63.10.1.2 | ColumnrcIsisAdjIndex | not-accessible | current | A unique value identifying the IS adjacency from all other such adjacencies on this circuit. This value is automatically assigned by the system when the adjace… |
| 1.3.6.1.4.1.2272.1.63.10.1.3 | ColumnrcIsisAdjHostName | read-only | current | The hostname listed in LSP, or the system name if host name is not configured. |
| 1.3.6.1.4.1.2272.1.63.10.1.4 | ColumnrcIsisAdjIfIndex | read-only | current | The value of ifIndex for the interface to which this circuit corresponds. |
| 1.3.6.1.4.1.2272.1.63.11 | TablercIsisLSPTable | not-accessible | current | Table of IS-IS LSP, this is extension to the isisLSPSummaryTable defined in ISIS MIB |
| 1.3.6.1.4.1.2272.1.63.11.1 | RowrcIsisLSPEntry | not-accessible | current | An entry of rcIsisLSP Table. A Entry in table exists for each ISIS LSP |
| 1.3.6.1.4.1.2272.1.63.11.1.1 | ColumnrcIsisLSPLevel | not-accessible | current | At which level does this LSP appear? |
| 1.3.6.1.4.1.2272.1.63.11.1.2 | ColumnrcIsisLSPID | not-accessible | current | The 8 byte LSP ID, consisting of the SystemID, Circuit ID, and Fragment Number. |
| 1.3.6.1.4.1.2272.1.63.11.1.3 | ColumnrcIsisLSPSeq | read-only | current | The sequence number for this LSP. |
| 1.3.6.1.4.1.2272.1.63.11.1.4 | ColumnrcIsisLSPHostName | read-only | current | The hostname listed in LSP, or the system name if host name is not configured. |
| 1.3.6.1.4.1.2272.1.63.11.1.5 | ColumnrcIsisLSPNickName | read-only | current | PLSB node's nickname |
| 1.3.6.1.4.1.2272.1.63.11.1.6 | ColumnrcIsisLSPLifetimeRemain | read-only | current | The remaining lifetime in seconds for this LSP. |
| 1.3.6.1.4.1.2272.1.63.11.1.7 | ColumnrcIsisLSPSmltBmac | read-only | current | SPBM node's SMLT virtual BMAC |
| 1.3.6.1.4.1.2272.1.63.12 | TablercIsisPlsbIpUnicastFibTable | not-accessible | obsolete | Table of IS-IS PLSB IP Unicast FIB. This table has been replaced by rcIsisPlsbIpInterIsidUnicastFibTable. |
| 1.3.6.1.4.1.2272.1.63.12.1 | RowrcIsisPlsbIpUnicastFibEntry | not-accessible | obsolete | An entry of rcIsisPlsbIpUnicastFib Table. A Entry in table exists for each PLSB IP unicast forwarding entry. |
| 1.3.6.1.4.1.2272.1.63.12.1.1 | ColumnrcIsisPlsbIpUnicastFibVrfId | not-accessible | current | VRF ID of the IP unicast FIB entry, 0 indicates NRE. |
| 1.3.6.1.4.1.2272.1.63.12.1.2 | ColumnrcIsisPlsbIpUnicastFibDestinationIpAddrType | not-accessible | current | The address type of destination IP Address. |
| 1.3.6.1.4.1.2272.1.63.12.1.3 | ColumnrcIsisPlsbIpUnicastFibDestinationIpAddr | not-accessible | current | Destination IP Address of the IP unicast FIB entry. Support ipv4 size(4) and ipv6 size(16) |
| 1.3.6.1.4.1.2272.1.63.12.1.4 | ColumnrcIsisPlsbIpUnicastFibDestinationMask | not-accessible | current | Destination IP mask of the IP unicast FIB entry |
| 1.3.6.1.4.1.2272.1.63.12.1.5 | ColumnrcIsisPlsbIpUnicastFibNextHopBmac | not-accessible | current | the nexthop BMAC of the IP unicast FIB entry |
| 1.3.6.1.4.1.2272.1.63.12.1.6 | ColumnrcIsisPlsbIpUnicastFibVlan | not-accessible | current | Vlan of the IP unicast FIB entry |
| 1.3.6.1.4.1.2272.1.63.12.1.7 | ColumnrcIsisPlsbIpUnicastFibIsid | read-only | current | ISID of the IP unicast FIB entry |
| 1.3.6.1.4.1.2272.1.63.12.1.8 | ColumnrcIsisPlsbIpUnicastFibNextHopName | read-only | current | the nexthop hostname of the IP unicast FIB entry |
| 1.3.6.1.4.1.2272.1.63.12.1.9 | ColumnrcIsisPlsbIpUnicastFibOutgoingPort | read-only | current | Outgoing port of the IP unicast Fib entry. |
| 1.3.6.1.4.1.2272.1.63.12.1.10 | ColumnrcIsisPlsbIpUnicastFibPrefixCost | read-only | current | prefix cost of the IP unicast FIB entry |
| 1.3.6.1.4.1.2272.1.63.12.1.11 | ColumnrcIsisPlsbIpUnicastFibSpbmCost | read-only | current | bmac cost of the IP unicast FIB entry |
| 1.3.6.1.4.1.2272.1.63.13 | TablercIsisPlsbUcastFibTable | not-accessible | current | Table of IS-IS PLSB Unicast FIB |
| 1.3.6.1.4.1.2272.1.63.13.1 | RowrcIsisPlsbUcastFibEntry | not-accessible | current | An entry of rcIsisPlsbUcastFib Table. A Entry in table exists for each PLSB unicast forwarding entry generated by ISIS SPF computation |
| 1.3.6.1.4.1.2272.1.63.13.1.1 | ColumnrcIsisPlsbUcastFibSysId | not-accessible | current | System ID of the node where unicast FIB entry come from |
| 1.3.6.1.4.1.2272.1.63.13.1.2 | ColumnrcIsisPlsbUcastFibVlan | not-accessible | current | Vlan of the unicast FIB entry |
| 1.3.6.1.4.1.2272.1.63.13.1.3 | ColumnrcIsisPlsbUcastFibDestinationMacAddr | not-accessible | current | Destination Mac Address of the unicast FIB entry |
| 1.3.6.1.4.1.2272.1.63.13.1.4 | ColumnrcIsisPlsbUcastFibOutgoingPort | read-only | current | Outgoing port of the unicast Fib entry. |
| 1.3.6.1.4.1.2272.1.63.13.1.5 | ColumnrcIsisPlsbUcastFibHostName | read-only | current | Host name of the node where unicast FIB entry come from |
| 1.3.6.1.4.1.2272.1.63.13.1.6 | ColumnrcIsisPlsbUcastFibCost | read-only | current | unicast FIB cost |
| 1.3.6.1.4.1.2272.1.63.14 | TablercIsisPlsbMcastFibTable | not-accessible | current | Table of IS-IS PLSB Multicast FIB |
| 1.3.6.1.4.1.2272.1.63.14.1 | RowrcIsisPlsbMcastFibEntry | not-accessible | current | An entry of rcIsisPlsbMcastFib Table. A Entry in table exists for each PLSB Multicast forwarding entry generated by ISIS SPF computation |
| 1.3.6.1.4.1.2272.1.63.14.1.1 | ColumnrcIsisPlsbMcastFibSysId | not-accessible | current | System ID of the node where multicast FIB entry come from |
| 1.3.6.1.4.1.2272.1.63.14.1.2 | ColumnrcIsisPlsbMcastFibVlan | not-accessible | current | Vlan of the multicast FIB entry |
| 1.3.6.1.4.1.2272.1.63.14.1.3 | ColumnrcIsisPlsbMcastFibMcastDestMacAddr | not-accessible | current | Multicast destination Mac Address of the multicast FIB entry |
| 1.3.6.1.4.1.2272.1.63.14.1.4 | ColumnrcIsisPlsbMcastFibIsid | read-only | current | Isid id of the multicast FIB entry |
| 1.3.6.1.4.1.2272.1.63.14.1.5 | ColumnrcIsisPlsbMcastFibNickName | read-only | current | nick name of node where this i-sid got configured or discovered |
| 1.3.6.1.4.1.2272.1.63.14.1.6 | ColumnrcIsisPlsbMcastFibType | read-only | current | PLSB i-sid type |
| 1.3.6.1.4.1.2272.1.63.14.1.7 | ColumnrcIsisPlsbMcastFibOutgoingPorts | read-only | obsolete | Nni port of the multicast Fib entry. This attribute is obsoleted. New attributes rcIsisPlsbMcastFibOutgoingInterfacePorts and rcIsisPlsbMcastFibOutgoingInterfa… |
| 1.3.6.1.4.1.2272.1.63.14.1.8 | ColumnrcIsisPlsbMcastFibHostName | read-only | current | Host name of the node where multicast FIB entry come from |
| 1.3.6.1.4.1.2272.1.63.14.1.9 | ColumnrcIsisPlsbMcastFibOutgoingInterfacePorts | read-only | current | port Outgoing interface of multicast fib entry. Each bit corresponds to a port, as represented by its ifIndex value . When a bit has the value one(1), the corr… |
| 1.3.6.1.4.1.2272.1.63.14.1.10 | ColumnrcIsisPlsbMcastFibOutgoingInterfaceMlts | read-only | current | mlt outgoing interface of multicast fib entry. A set of bits represents the MLT IDs.From left to right, the first bit set represent MltId 1. The second bit set… |
| 1.3.6.1.4.1.2272.1.63.14.1.11 | ColumnrcIsisPlsbMcastFibIncomingInterface | read-only | current | Incoming interface (port or mlt) of the multicast Fib entry. |
| 1.3.6.1.4.1.2272.1.63.15 | TablercIsisPlsbNodeTable | not-accessible | current | Table of IS-IS PLSB Node |
| 1.3.6.1.4.1.2272.1.63.15.1 | RowrcIsisPlsbNodeEntry | not-accessible | current | An entry of rcIsisPlsbNode Table. A Entry in table exists for each node running PLSB ISIS in the setup. |
| 1.3.6.1.4.1.2272.1.63.15.1.1 | ColumnrcIsisPlsbNodeSysId | not-accessible | current | System ID of the PLSB node entry |
| 1.3.6.1.4.1.2272.1.63.15.1.2 | ColumnrcIsisPlsbNodePrimaryParentSysId | read-only | current | System ID of parent node of the PLSB node entry for primary bvlan |
| 1.3.6.1.4.1.2272.1.63.15.1.3 | ColumnrcIsisPlsbNodePrimaryBvlan | read-only | current | spbm primary b-vlan |
| 1.3.6.1.4.1.2272.1.63.15.1.4 | ColumnrcIsisPlsbNodeSecondaryParentSysId | read-only | current | System ID of parent node of the PLSB node entry for secondary bvlan |
| 1.3.6.1.4.1.2272.1.63.15.1.5 | ColumnrcIsisPlsbNodeSecondaryBvlan | read-only | current | spbm secondary b-vlan |
| 1.3.6.1.4.1.2272.1.63.16 | TablercIsisSpbmPortDropStatsTable | not-accessible | current | Table of IS-IS SPBM port drop-stats by port index and SPBM b-vlan |
| 1.3.6.1.4.1.2272.1.63.16.1 | RowrcIsisSpbmPortDropStatsEntry | not-accessible | current | SPBM port based frame drop counters. |
| 1.3.6.1.4.1.2272.1.63.16.1.1 | ColumnrcIsisSpbmPortDropStatsPortIndex | not-accessible | current | An index value that uniquely identifies a port. This value is similar to ifIndex in MIB2. |
| 1.3.6.1.4.1.2272.1.63.16.1.2 | ColumnrcIsisSpbmPortDropStatsVlanId | not-accessible | current | A value that uniquely identifies the SPBM Virtual LAN associated with this entry. |
| 1.3.6.1.4.1.2272.1.63.16.1.3 | ColumnrcIsisSpbmPortDropStatsVlanType | read-only | current | Indicates the type of SPBM bvlan |
| 1.3.6.1.4.1.2272.1.63.16.1.4 | ColumnrcIsisSpbmPortDropStatsUnknownUcastSrcAddr | read-only | current | The total number of SPBM unknown unicast SA packets dropped on SPBM bvlan. |
| 1.3.6.1.4.1.2272.1.63.16.1.5 | ColumnrcIsisSpbmPortDropStatsRpfcUcastSrcAddr | read-only | current | The total number of SPBM reverse path forwarding check (RPFC) unicast SA packets dropped on SPBM bvlan. |
| 1.3.6.1.4.1.2272.1.63.16.1.6 | ColumnrcIsisSpbmPortDropStatsUnknownUcastDestAddr | read-only | current | The total number of SPBM unknown unicast DA packets dropped on SPBM bvlan. |
| 1.3.6.1.4.1.2272.1.63.16.1.7 | ColumnrcIsisSpbmPortDropStatsUnknownMcastDestAddr | read-only | current | The total number of SPBM unknown multicast DA packets dropped on SPBM bvlan. |
| 1.3.6.1.4.1.2272.1.63.16.1.8 | ColumnrcIsisSpbmPortDropStatsRpfcMcastSrcAddr | read-only | current | The total number of SPBM reverse path forwarding check (RPFC) multicast SA packets dropped on SPBM bvlan. |
| 1.3.6.1.4.1.2272.1.63.16.1.9 | ColumnrcIsisSpbmPortDropStatsLastDropMac | read-only | current | The DA or SA last dropped on SPBM bvlan. |
| 1.3.6.1.4.1.2272.1.63.16.1.10 | ColumnrcIsisSpbmPortDropStatsIsMacDestAddr | read-only | current | The last dropped mac on SPBM bvlan is DA or not. |
| 1.3.6.1.4.1.2272.1.63.16.1.11 | ColumnrcIsisSpbmPortDropStatsLastDropMacHostName | read-only | current | The host name of the nodes where last dropped SA or DA on SPBM bvlan belongs |
| 1.3.6.1.4.1.2272.1.63.17 | TablercIsisSpbmSrcAddrDropStatsTable | not-accessible | current | Table of IS-IS SPBM SA drop-stats by Source Address and SPBM b-vlan |
| 1.3.6.1.4.1.2272.1.63.17.1 | RowrcIsisSpbmSrcAddrDropStatsEntry | not-accessible | current | SPBM Source Address based frame drop counters. |
| 1.3.6.1.4.1.2272.1.63.17.1.1 | ColumnrcIsisSpbmSrcAddrDropStatsAddr | not-accessible | current | The source MAC of the drop packet. |
| 1.3.6.1.4.1.2272.1.63.17.1.2 | ColumnrcIsisSpbmSrcAddrDropStatsVlanId | not-accessible | current | A value that uniquely identifies the SPBM Virtual LAN associated with this entry. |
| 1.3.6.1.4.1.2272.1.63.17.1.3 | ColumnrcIsisSpbmSrcAddrDropStatsVlanType | read-only | current | Indicates the type of SPBM bvlan |
| 1.3.6.1.4.1.2272.1.63.17.1.4 | ColumnrcIsisSpbmSrcAddrDropStatsRpfcUcastSrcAddr | read-only | current | The total number of SPBM reverse path forwarding check (RPFC) unicast SA packets dropped on SPBM bvlan. |
| 1.3.6.1.4.1.2272.1.63.17.1.5 | ColumnrcIsisSpbmSrcAddrDropStatsUnknownUcastDestAddr | read-only | current | The total number of SPBM unknown unicast DA packets dropped on SPBM bvlan |
| 1.3.6.1.4.1.2272.1.63.17.1.6 | ColumnrcIsisSpbmSrcAddrDropStatsRpfcMcastSrcAddr | read-only | current | The total number of SPBM reverse path forwarding check (RPFC) multicast SA packets dropped on SPBM bvlan |
| 1.3.6.1.4.1.2272.1.63.17.1.7 | ColumnrcIsisSpbmSrcAddrDropStatsUnknownMcastDestAddr | read-only | current | The total number of SPBM unknown multicast DA packets dropped on SPBM bvlan |
| 1.3.6.1.4.1.2272.1.63.17.1.8 | ColumnrcIsisSpbmSrcAddrDropStatsUnknownUcastSrcAddr | read-only | current | The total number of SPBM unknown unicast SA packets dropped on SPBM bvlan |
| 1.3.6.1.4.1.2272.1.63.17.1.9 | ColumnrcIsisSpbmSrcAddrDropStatsHostName | read-only | current | The host name of the nodes where last on SPBM bvlan belongs |
| 1.3.6.1.4.1.2272.1.63.18 | TablercIsisSpbmUniTable | not-accessible | current | Table containing information about defined I-SIDs and their current use on the platform from an SPBM perspective. |
| 1.3.6.1.4.1.2272.1.63.18.1 | RowrcIsisSpbmUniEntry | not-accessible | current | An rcIsisSpbmUniTable entry. An entry exists for each I-SID that is currently defined. Entry instance data indicates current I-SID usage from a UNI perspective… |
| 1.3.6.1.4.1.2272.1.63.18.1.1 | ColumnrcIsisSpbmUniIsid | not-accessible | current | The I-SID key for this entry. |
| 1.3.6.1.4.1.2272.1.63.18.1.2 | ColumnrcIsisSpbmUniPort | not-accessible | current | A port that is associated with the I-SID key for this entry. A value equal to 0 indicates that a port is not associated with the entry I-SID key, meaning that … |
| 1.3.6.1.4.1.2272.1.63.18.1.3 | ColumnrcIsisSpbmUniVlan | not-accessible | current | A value that uniquely identifies the Virtual LAN associated with this entry. This value corresponds to the lower 12 bits in the IEEE 802.1Q VLAN Tag. A value e… |
| 1.3.6.1.4.1.2272.1.63.18.1.4 | ColumnrcIsisSpbmUniRowStatus | read-create | current | This is used to control creation/deletion of entries in this table. |
| 1.3.6.1.4.1.2272.1.63.18.1.5 | ColumnrcIsisSpbmUniStorage | read-only | current | This object retrieves the storage type for this entry. |
| 1.3.6.1.4.1.2272.1.63.19 | TablercIsisSpbmIpMcastRouteTable | not-accessible | obsolete | SPBM IP Multicast Route Table This table has been replaced by the rcIsisSpbmIpIsidMcastRouteTable. |
| 1.3.6.1.4.1.2272.1.63.19.1 | RowrcIsisSpbmIpMcastRouteEntry | not-accessible | obsolete | SPBM IP Multicast Route Entry |
| 1.3.6.1.4.1.2272.1.63.19.1.1 | ColumnrcIsisSpbmIpMcastGroup | not-accessible | current | The IP multicast group address for which this entry contains multicast routing information. |
| 1.3.6.1.4.1.2272.1.63.19.1.2 | ColumnrcIsisSpbmIpMcastSource | not-accessible | current | The IP address of the multicast source for which this entry contains multicast routing information. |
| 1.3.6.1.4.1.2272.1.63.19.1.3 | ColumnrcIsisSpbmIpMcastVsnIsid | not-accessible | current | Virtual Services Network ISID |
| 1.3.6.1.4.1.2272.1.63.19.1.4 | ColumnrcIsisSpbmIpMcastNickName | not-accessible | current | Multicast nick name |
| 1.3.6.1.4.1.2272.1.63.19.1.5 | ColumnrcIsisSpbmIpMcastSourceBeb | read-only | current | Source Backbone Edge Bridge name |
| 1.3.6.1.4.1.2272.1.63.19.1.6 | ColumnrcIsisSpbmIpMcastVlanId | read-only | current | VLAN ID of the interface |
| 1.3.6.1.4.1.2272.1.63.19.1.7 | ColumnrcIsisSpbmIpMcastVrfName | read-only | current | VRF name of the interface |
| 1.3.6.1.4.1.2272.1.63.19.1.8 | ColumnrcIsisSpbmIpMcastDataIsid | read-only | current | Data ISID |
| 1.3.6.1.4.1.2272.1.63.19.1.9 | ColumnrcIsisSpbmIpMcastNniPorts | read-only | obsolete | List of NNI ports. This attribute is obsoleted. New attributes rcIsisSpbmIpMcastNniInterfacePorts and rcIsisSpbmIpMcastNniInterfaceMlts are added for nni inter… |
| 1.3.6.1.4.1.2272.1.63.19.1.10 | ColumnrcIsisSpbmIpMcastType | read-only | current | Indicates the type of the interface |
| 1.3.6.1.4.1.2272.1.63.19.1.11 | ColumnrcIsisSpbmIpMcastBvlan | read-only | current | Backbone VLAN on which SPB traffic is carried |
| 1.3.6.1.4.1.2272.1.63.19.1.12 | ColumnrcIsisSpbmIpMcastNniInterfacePorts | read-only | current | list of port nni interface. Each bit corresponds to a port, as represented by its ifIndex value. When a bit has the value one(1), the corresponding port is a m… |
| 1.3.6.1.4.1.2272.1.63.19.1.13 | ColumnrcIsisSpbmIpMcastNniInterfaceMlts | read-only | current | list of mlt nni interface. A set of bits represents the MLT IDs.From left to right, the first bit set represent MltId 1. The second bit set represent MltId 2, … |
| 1.3.6.1.4.1.2272.1.63.20 | TablercIsisSpbmIpMcastRouteUniRcvrsTable | not-accessible | obsolete | SPBM IP Multicast Route UNI Receivers Table This table has been replaced by the rcIsisSpbmIpIsidMcastRouteUniRcvrsTable. |
| 1.3.6.1.4.1.2272.1.63.20.1 | RowrcIsisSpbmIpMcastRouteUniRcvrsEntry | not-accessible | obsolete | SPBM IP Multicast Route UNI Receivers Entry |
| 1.3.6.1.4.1.2272.1.63.20.1.1 | ColumnrcIsisSpbmIpMcastUniRcvrsGroup | not-accessible | current | The IP multicast group address for which this entry contains multicast routing information. |
| 1.3.6.1.4.1.2272.1.63.20.1.2 | ColumnrcIsisSpbmIpMcastUniRcvrsSource | not-accessible | current | The IP address of the multicast source for which this entry contains multicast routing information. |
| 1.3.6.1.4.1.2272.1.63.20.1.3 | ColumnrcIsisSpbmIpMcastUniRcvrsVsnIsid | not-accessible | current | Virtual Services Network ISID |
| 1.3.6.1.4.1.2272.1.63.20.1.4 | ColumnrcIsisSpbmIpMcastUniRcvrsNickName | not-accessible | current | Multicast nick name |
| 1.3.6.1.4.1.2272.1.63.20.1.5 | ColumnrcIsisSpbmIpMcastUniRcvrsEgressVlan | not-accessible | current | The Vlan associated with this egress entry. |
| 1.3.6.1.4.1.2272.1.63.20.1.6 | ColumnrcIsisSpbmIpMcastUniRcvrsEgressActivePorts | read-only | current | The set of ports in the vlan that have UNI receivers for this multicast route. |
| 1.3.6.1.4.1.2272.1.63.21 | TablercIsisPlsbIpInterIsidUnicastFibTable | not-accessible | current | Table of IS-IS PLSB IP Inter Isid Unicast FIB. This table will replace rcIsisPlsbIpUnicastFibTable |
| 1.3.6.1.4.1.2272.1.63.21.1 | RowrcIsisPlsbIpInterIsidUnicastFibEntry | not-accessible | current | An entry of rcIsisPlsbIpInterIsidUnicastFib Table. An Entry table exists for each PLSB IP unicast forwarding entry. |
| 1.3.6.1.4.1.2272.1.63.21.1.1 | ColumnrcIsisPlsbIpInterIsidUnicastFibVrfId | not-accessible | current | VRF ID of the IP unicast FIB entry, 0 indicates NRE. |
| 1.3.6.1.4.1.2272.1.63.21.1.2 | ColumnrcIsisPlsbIpInterIsidUnicastFibDestinationIpAddrType | not-accessible | current | The address type of destination IP Address. |
| 1.3.6.1.4.1.2272.1.63.21.1.3 | ColumnrcIsisPlsbIpInterIsidUnicastFibDestinationIpAddr | not-accessible | current | Destination IP Address of the IP unicast FIB entry. Support ipv4 size(4) and ipv6 size(16) |
| 1.3.6.1.4.1.2272.1.63.21.1.4 | ColumnrcIsisPlsbIpInterIsidUnicastFibDestinationMask | not-accessible | current | Destination IP mask of the IP unicast FIB entry |
| 1.3.6.1.4.1.2272.1.63.21.1.5 | ColumnrcIsisPlsbIpInterIsidUnicastFibNextHopBmac | not-accessible | current | The nexthop BMAC of the IP unicast FIB entry |
| 1.3.6.1.4.1.2272.1.63.21.1.6 | ColumnrcIsisPlsbIpInterIsidUnicastFibDestIsid | not-accessible | current | Destination ISID of the IP unicast FIB entry |
| 1.3.6.1.4.1.2272.1.63.21.1.7 | ColumnrcIsisPlsbIpInterIsidUnicastFibVlan | not-accessible | current | Vlan of the IP unicast FIB entry. The value of 0 is associated with a local Inter VSN circuitless IP interface fib entry. |
| 1.3.6.1.4.1.2272.1.63.21.1.8 | ColumnrcIsisPlsbIpInterIsidUnicastFibIsid | read-only | current | ISID of the IP unicast FIB entry |
| 1.3.6.1.4.1.2272.1.63.21.1.9 | ColumnrcIsisPlsbIpInterIsidUnicastFibNextHopName | read-only | current | The nexthop hostname of the IP unicast FIB entry |
| 1.3.6.1.4.1.2272.1.63.21.1.10 | ColumnrcIsisPlsbIpInterIsidUnicastFibOutgoingPort | read-only | current | Outgoing port of the IP unicast Fib entry. |
| 1.3.6.1.4.1.2272.1.63.21.1.11 | ColumnrcIsisPlsbIpInterIsidUnicastFibPrefixCost | read-only | current | prefix cost of the IP unicast FIB entry |
| 1.3.6.1.4.1.2272.1.63.21.1.12 | ColumnrcIsisPlsbIpInterIsidUnicastFibSpbmCost | read-only | current | Bmac cost of the IP unicast FIB entry |
| 1.3.6.1.4.1.2272.1.63.21.1.13 | ColumnrcIsisPlsbIpInterIsidUnicastFibPreference | read-only | current | IP Route preference of the IP unicast FIB entry |
| 1.3.6.1.4.1.2272.1.63.21.1.14 | ColumnrcIsisPlsbIpInterIsidUnicastFibMetricType | read-only | current | IP Metric Type of the IP unicast FIB entry |
| 1.3.6.1.4.1.2272.1.63.22 | NodercIsisSpbmScalars | |||
| 1.3.6.1.4.1.2272.1.63.22.1 | ScalarrcIsisSpbmLoopbackPortCurrState | read-write | current | Indicates the current SPBM-reserved loopback port. |
| 1.3.6.1.4.1.2272.1.63.22.2 | ScalarrcIsisSpbmLoopbackPortNextState | read-write | current | Indicates the next SPBM-reserved loopback port (after reboot). |
| 1.3.6.1.4.1.2272.1.63.23 | TablercIsisPlsbIpv6UnicastFibTable | not-accessible | current | Table of IS-IS PLSB IPV6 Unicast FIB |
| 1.3.6.1.4.1.2272.1.63.23.1 | RowrcIsisPlsbIpv6UnicastFibEntry | not-accessible | current | An entry of rcIsisPlsbIpv6UnicastFib Table. A Entry in table exists for each PLSB IPV6 unicast forwarding entry. |
| 1.3.6.1.4.1.2272.1.63.23.1.1 | ColumnrcIsisPlsbIpv6UnicastFibVrfId | not-accessible | current | VRF ID of the IPV6 unicast FIB entry, 0 indicates NRE. |
| 1.3.6.1.4.1.2272.1.63.23.1.2 | ColumnrcIsisPlsbIpv6UnicastFibDestinationIpAddrType | not-accessible | current | The address type of destination IPV6 Address. |
| 1.3.6.1.4.1.2272.1.63.23.1.3 | ColumnrcIsisPlsbIpv6UnicastFibDestinationIpAddr | not-accessible | current | Destination IP Address of the IPV6 unicast FIB entry. |
| 1.3.6.1.4.1.2272.1.63.23.1.4 | ColumnrcIsisPlsbIpv6UnicastFibDestinationMask | not-accessible | current | Destination IP mask of the IPV6 unicast FIB entry |
| 1.3.6.1.4.1.2272.1.63.23.1.5 | ColumnrcIsisPlsbIpv6UnicastFibNextHopBmac | not-accessible | current | the nexthop BMAC of the IPV6 unicast FIB entry |
| 1.3.6.1.4.1.2272.1.63.23.1.6 | ColumnrcIsisPlsbIpv6UnicastFibDestIsid | not-accessible | current | Destination ISID of the IPv6 unicast FIB entry |
| 1.3.6.1.4.1.2272.1.63.23.1.7 | ColumnrcIsisPlsbIpv6UnicastFibVlan | not-accessible | current | Vlan of the IPV6 unicast FIB entry |
| 1.3.6.1.4.1.2272.1.63.23.1.8 | ColumnrcIsisPlsbIpv6UnicastFibIsid | read-only | current | ISID of the IPV6 unicast FIB entry |
| 1.3.6.1.4.1.2272.1.63.23.1.9 | ColumnrcIsisPlsbIpv6UnicastFibNextHopName | read-only | current | the nexthop hostname of the IPV6 unicast FIB entry |
| 1.3.6.1.4.1.2272.1.63.23.1.10 | ColumnrcIsisPlsbIpv6UnicastFibOutgoingPort | read-only | current | Outgoing port of the IPV6 unicast Fib entry. |
| 1.3.6.1.4.1.2272.1.63.23.1.11 | ColumnrcIsisPlsbIpv6UnicastFibPrefixCost | read-only | current | prefix cost of the IPV6 unicast FIB entry |
| 1.3.6.1.4.1.2272.1.63.23.1.12 | ColumnrcIsisPlsbIpv6UnicastFibSpbmCost | read-only | current | bmac cost of the IPV6 unicast FIB entry |
| 1.3.6.1.4.1.2272.1.63.24 | TablercIsisSpbmIpIsidMcastRouteTable | not-accessible | current | SPBM IP Isid Multicast Route Table |
| 1.3.6.1.4.1.2272.1.63.24.1 | RowrcIsisSpbmIpIsidMcastRouteEntry | not-accessible | current | SPBM IP Isid Multicast Route Entry |
| 1.3.6.1.4.1.2272.1.63.24.1.1 | ColumnrcIsisSpbmIpIsidMcastVsnIsid | not-accessible | current | Virtual Services Network ISID |
| 1.3.6.1.4.1.2272.1.63.24.1.2 | ColumnrcIsisSpbmIpIsidMcastGroup | not-accessible | current | The IP multicast group address for which this entry contains multicast routing information. |
| 1.3.6.1.4.1.2272.1.63.24.1.3 | ColumnrcIsisSpbmIpIsidMcastSource | not-accessible | current | The IP address of the multicast source for which this entry contains multicast routing information. |
| 1.3.6.1.4.1.2272.1.63.24.1.4 | ColumnrcIsisSpbmIpIsidMcastNickName | not-accessible | current | Multicast nick name |
| 1.3.6.1.4.1.2272.1.63.24.1.5 | ColumnrcIsisSpbmIpIsidMcastSourceBeb | read-only | current | Source Backbone Edge Bridge name |
| 1.3.6.1.4.1.2272.1.63.24.1.6 | ColumnrcIsisSpbmIpIsidMcastVlanId | read-only | current | VLAN ID of the interface |
| 1.3.6.1.4.1.2272.1.63.24.1.7 | ColumnrcIsisSpbmIpIsidMcastVrfName | read-only | current | VRF name of the interface |
| 1.3.6.1.4.1.2272.1.63.24.1.8 | ColumnrcIsisSpbmIpIsidMcastDataIsid | read-only | current | Data ISID |
| 1.3.6.1.4.1.2272.1.63.24.1.9 | ColumnrcIsisSpbmIpIsidMcastType | read-only | current | Indicates the type of the interface |
| 1.3.6.1.4.1.2272.1.63.24.1.10 | ColumnrcIsisSpbmIpIsidMcastBvlan | read-only | current | Backbone VLAN on which SPB traffic is carried |
| 1.3.6.1.4.1.2272.1.63.24.1.11 | ColumnrcIsisSpbmIpIsidMcastNniInterfacePorts | read-only | current | list of port nni interface. Each bit corresponds to a port, as represented by its ifIndex value. When a bit has the value one(1), the corresponding port is a m… |
| 1.3.6.1.4.1.2272.1.63.24.1.12 | ColumnrcIsisSpbmIpIsidMcastNniInterfaceMlts | read-only | current | list of mlt nni interface. A set of bits represents the MLT IDs.From left to right, the first bit set represent MltId 1. The second bit set represent MltId 2, … |
| 1.3.6.1.4.1.2272.1.63.25 | TablercIsisSpbmIpIsidMcastRouteUniRcvrsTable | not-accessible | current | SPBM IP Isid Multicast Route UNI Receivers Table |
| 1.3.6.1.4.1.2272.1.63.25.1 | RowrcIsisSpbmIpIsidMcastRouteUniRcvrsEntry | not-accessible | current | SPBM IP Isid Multicast Route UNI Receivers Entry |
| 1.3.6.1.4.1.2272.1.63.25.1.1 | ColumnrcIsisSpbmIpIsidMcastUniRcvrsVsnIsid | not-accessible | current | Virtual Services Network ISID |
| 1.3.6.1.4.1.2272.1.63.25.1.2 | ColumnrcIsisSpbmIpIsidMcastUniRcvrsGroup | not-accessible | current | The IP multicast group address for which this entry contains multicast routing information. |
| 1.3.6.1.4.1.2272.1.63.25.1.3 | ColumnrcIsisSpbmIpIsidMcastUniRcvrsSource | not-accessible | current | The IP address of the multicast source for which this entry contains multicast routing information. |
| 1.3.6.1.4.1.2272.1.63.25.1.4 | ColumnrcIsisSpbmIpIsidMcastUniRcvrsNickName | not-accessible | current | Multicast nick name |
| 1.3.6.1.4.1.2272.1.63.25.1.5 | ColumnrcIsisSpbmIpIsidMcastUniRcvrsEgressVlan | not-accessible | current | The Vlan associated with this egress entry. |
| 1.3.6.1.4.1.2272.1.63.25.1.6 | ColumnrcIsisSpbmIpIsidMcastUniRcvrsEgressActivePorts | read-only | current | The set of ports in the vlan that have UNI receivers for this multicast route. |
| 1.3.6.1.4.1.2272.1.63.26 | TablercIsisLogicalInterfaceTable | not-accessible | current | The table of ISIS logical interface. |
| 1.3.6.1.4.1.2272.1.63.26.1 | RowrcIsisLogicalInterfaceEntry | not-accessible | current | Entry contains the configuration information about the logical isis interface |
| 1.3.6.1.4.1.2272.1.63.26.1.1 | ColumnrcIsisLogicalInterfaceId | not-accessible | current | An index used to uniquely identify this logical interface. |
| 1.3.6.1.4.1.2272.1.63.26.1.2 | ColumnrcIsisLogicalInterfaceIfIndex | read-only | current | The ISIS logical ifIndex |
| 1.3.6.1.4.1.2272.1.63.26.1.3 | ColumnrcIsisLogicalInterfaceType | read-create | current | Indicates the entry is for Layer2 or Layer3 |
| 1.3.6.1.4.1.2272.1.63.26.1.4 | ColumnrcIsisLogicalInterfaceDestIPAddr | read-create | current | The logical interface Destination IP address |
| 1.3.6.1.4.1.2272.1.63.26.1.5 | ColumnrcIsisLogicalInterfaceDestIfIndex | read-create | current | The value of ifIndex for the interface to which this logical interface corresponds. It can be port/mlt ifindex. |
| 1.3.6.1.4.1.2272.1.63.26.1.6 | ColumnrcIsisLogicalInterfaceVids | read-create | current | This bitfield is used to identify which VLANs this logical interface is associated with. Each VLAN ID is stored as a bit. The most-significant (left-most) bit … |
| 1.3.6.1.4.1.2272.1.63.26.1.7 | ColumnrcIsisLogicalInterfacePrimaryVid | read-create | current | Primary tunnel vlan associated with L2Core ISIS logical interface |
| 1.3.6.1.4.1.2272.1.63.26.1.8 | ColumnrcIsisLogicalInterfaceName | read-create | current | An administratively-assigned name for this Logical interface. |
| 1.3.6.1.4.1.2272.1.63.26.1.9 | ColumnrcIsisLogicalInterfaceRowStatus | read-create | current | Used to create/delete logical interface |
| 1.3.6.1.4.1.2272.1.63.26.1.10 | ColumnrcIsisLogicalInterfaceCircIndex | read-only | current | An index used to identify ISIS circuit creating under the logical interface |
| 1.3.6.1.4.1.2272.1.63.26.1.11 | ColumnrcIsisLogicalInterfaceNextHopIfIndex | read-only | deprecated | Next hop destination ifindex to reach logical tunnel dest-ip It is deprecated by rcIsisLogicalInterfaceNextHopDestIfIndex |
| 1.3.6.1.4.1.2272.1.63.26.1.12 | ColumnrcIsisLogicalInterfaceNextHopVid | read-only | deprecated | Next hop vlan id to reach logical tunnel dest-ip It is deprecated by rcIsisLogicalInterfaceNextHopDestVid |
| 1.3.6.1.4.1.2272.1.63.26.1.13 | ColumnrcIsisLogicalInterfaceNextHopVrf | read-only | current | Next hop vrf name to reach logical tunnel dest-ip |
| 1.3.6.1.4.1.2272.1.63.27 | TablercIsisSpbmMcastFibUniTable | not-accessible | current | IS-IS SPBM Multicast FIB Uni Table |
| 1.3.6.1.4.1.2272.1.63.27.1 | RowrcIsisSpbmMcastFibUniEntry | not-accessible | current | IS-IS SPBM Multicast FIB Uni Entry |
| 1.3.6.1.4.1.2272.1.63.27.1.1 | ColumnrcIsisSpbmMcastFibUniSysId | not-accessible | current | System ID of the node where multicast FIB entry come from. |
| 1.3.6.1.4.1.2272.1.63.27.1.2 | ColumnrcIsisSpbmMcastFibUniVlan | not-accessible | current | bVlan of the multicast FIB entry. |
| 1.3.6.1.4.1.2272.1.63.27.1.3 | ColumnrcIsisSpbmMcastFibUniMcastDestMacAddr | not-accessible | current | Multicast destination Mac Address of the multicast FIB entry. |
| 1.3.6.1.4.1.2272.1.63.27.1.4 | ColumnrcIsisSpbmMcastFibUniCvid | not-accessible | current | Customer vid of the multicast FIB entry. 4095 is not used. 4096 is reserved for untagged case. |
| 1.3.6.1.4.1.2272.1.63.27.1.5 | ColumnrcIsisSpbmMcastFibUniOutgoingInterfaceNniPorts | read-only | current | nni port Outgoing interface of multicast fib entry. Each bit corresponds to a port, as represented by its ifIndex value . When a bit has the value one(1), the … |
| 1.3.6.1.4.1.2272.1.63.27.1.6 | ColumnrcIsisSpbmMcastFibUniOutgoingInterfaceNniMlts | read-only | current | nni mlt outgoing interface of multicast fib entry. A set of bits represents the MLT IDs.From left to right, the first bit set represent MltId 1. The second bit… |
| 1.3.6.1.4.1.2272.1.63.27.1.7 | ColumnrcIsisSpbmMcastFibUniOutgoingInterfaceSwUniPorts | read-only | current | switched uni port Outgoing interface of multicast fib entry. Each bit corresponds to a port, as represented by its ifIndex value . When a bit has the value one… |
| 1.3.6.1.4.1.2272.1.63.27.1.8 | ColumnrcIsisSpbmMcastFibUniOutgoingInterfaceSwUniMlts | read-only | current | switched uni mlt outgoing interface of multicast fib entry. A set of bits represents the MLT IDs.From left to right, the first bit set represent MltId 1. The s… |
| 1.3.6.1.4.1.2272.1.63.27.1.9 | ColumnrcIsisSpbmMcastFibUniOutgoingInterfaceCvlanUniPorts | read-only | current | platform cvlan uni port Outgoing interface of multicast fib entry. Each bit corresponds to a port, as represented by its ifIndex value . When a bit has the val… |
| 1.3.6.1.4.1.2272.1.63.27.1.10 | ColumnrcIsisSpbmMcastFibUniOutgoingInterfaceCvlanUniMlts | read-only | current | platform cvlan uni mlt outgoing interface of multicast fib entry. A set of bits represents the MLT IDs.From left to right, the first bit set represent MltId 1.… |
| 1.3.6.1.4.1.2272.1.63.27.1.11 | ColumnrcIsisSpbmMcastFibUniCvlan | read-only | current | platform customer vlan of the multicast FIB entry. |
| 1.3.6.1.4.1.2272.1.63.28 | TablercIsisLogicalInterfaceNextHopTable | not-accessible | current | The table to store nexthop information for the logical-interface tunnel |
| 1.3.6.1.4.1.2272.1.63.28.1 | RowrcIsisLogicalInterfaceNextHopEntry | not-accessible | current | Entry contains the nexthop information for the logical interface tunnel |
| 1.3.6.1.4.1.2272.1.63.28.1.1 | ColumnrcIsisLogicalInterfaceNextHopId | not-accessible | current | An index used to uniquely identify the logical interface tunnel.This value is same as the rcIsisLogicalInterfaceId in the rcIsisLogicalInterfaceTable |
| 1.3.6.1.4.1.2272.1.63.28.1.2 | ColumnrcIsisLogicalInterfaceNextHopIp | not-accessible | current | An index that uniquely identifies the next hop IP address of the logical interface tunnel |
| 1.3.6.1.4.1.2272.1.63.28.1.3 | ColumnrcIsisLogicalInterfaceNextHopDestIfIndex | read-only | current | Next hop destination ifindex to reach the next hop ip of logical interface tunnel |
| 1.3.6.1.4.1.2272.1.63.28.1.4 | ColumnrcIsisLogicalInterfaceNextHopDestVid | read-only | current | Next hop destination vlan id to reach the next hop ip of logical interface tunnel |
| 1.3.6.1.4.1.2272.1.64 | NodercSlpp | |||
| 1.3.6.1.4.1.2272.1.64.1 | NodercSlppMib | |||
| 1.3.6.1.4.1.2272.1.64.1.0 | NodercSlppNotifications | |||
| 1.3.6.1.4.1.2272.1.64.1.0.1 | NotificationrcnSlppPortDownEvent | obsolete | A port down event that has occurred due to SLPP. The user is notified of the expected Vlan ID along with the Vlan ID and source MAC address of the packet comin… | |
| 1.3.6.1.4.1.2272.1.64.1.0.2 | NotificationrcnSlppPortDownEventNew | current | A port down event that has occurred due to SLPP. The trap includes the port and its Vlan which receives the packet, and along with the Vlan ID and source MAC a… | |
| 1.3.6.1.4.1.2272.1.64.1.0.3 | NotificationrcnSlppLoopOnDiffVlan | current | Indicates SLPP received its own packet but with the TX VLAN not equal to the RX VLAN. | |
| 1.3.6.1.4.1.2272.1.64.1.0.4 | NotificationrcnSlppGuardHoldDownExpired | current | Indicates that the SLPP-guard hold-down timer has expired on a port on which SLPP-guard is enabled, and the port has been re-enabled. | |
| 1.3.6.1.4.1.2272.1.64.1.0.5 | NotificationrcnSlppGuardPacketReceived | current | Indicates an SLPP packet has been received on a port on which SLPP-guard is enabled. The port has been disabled. | |
| 1.3.6.1.4.1.2272.1.64.1.1 | NodercSlppObjects | |||
| 1.3.6.1.4.1.2272.1.64.1.1.1 | NodercSlppScalars | |||
| 1.3.6.1.4.1.2272.1.64.1.1.1.1 | ScalarrcSlppGlobalEnable | read-write | current | Global enable/disable for the simple loop prevention protocol. |
| 1.3.6.1.4.1.2272.1.64.1.1.1.2 | ScalarrcSlppTransmissionInterval | read-write | current | The interval (in seconds) for which loop detection occurs. |
| 1.3.6.1.4.1.2272.1.64.1.1.1.3 | ScalarrcSlppEtherType | read-write | current | SLPP Protocol Identification. The value is normally in Hex. |
| 1.3.6.1.4.1.2272.1.64.1.1.1.4 | ScalarrcSlppTimeout | read-write | current | This value specifies the time period for which a port will remain disabled. When SLPP disables a port, after this time period expires, the port will become re-… |
| 1.3.6.1.4.1.2272.1.64.1.1.1.5 | ScalarrcSlppUniPorts | read-write | current | Contains UNI ports added under SLPP global config |
| 1.3.6.1.4.1.2272.1.64.1.1.1.6 | ScalarrcSlppGuardEtherType | read-write | current | SLPP Guard ether type. |
| 1.3.6.1.4.1.2272.1.64.1.1.1.7 | ScalarrcSlppSopCongestionDetectionEnable | read-write | current | Global enable/disable for SLPP SOP congestion detection. |
| 1.3.6.1.4.1.2272.1.64.1.1.1.8 | ScalarrcSlppPortdownWaitInterval | read-write | current | The portdown wait interval(in milli seconds) during sop congestion. |
| 1.3.6.1.4.1.2272.1.64.1.1.2 | TablercSlppVlanTable | not-accessible | current | Table of VLANs for which simple loop detection occur on. |
| 1.3.6.1.4.1.2272.1.64.1.1.2.1 | RowrcSlppVlanEntry | not-accessible | current | SLPP VLAN entry. |
| 1.3.6.1.4.1.2272.1.64.1.1.2.1.1 | ColumnrcSlppVlanVlanId | not-accessible | current | Vlan id for which simple loop detection occurs on. |
| 1.3.6.1.4.1.2272.1.64.1.1.2.1.2 | ColumnrcSlppVlanSlppEnable | read-write | current | Flag to indicate whether the VLAN entry is active or not for SLPP. |
| 1.3.6.1.4.1.2272.1.64.1.1.2.1.3 | ColumnrcSlppVlanRowStatus | read-write | current | Used to create/delete entries. |
| 1.3.6.1.4.1.2272.1.64.1.1.3 | TablercSlppPortTable | not-accessible | current | Table of ports for which simple loop detection occurs on. |
| 1.3.6.1.4.1.2272.1.64.1.1.3.1 | RowrcSlppPortEntry | not-accessible | current | SLPP Port entry. |
| 1.3.6.1.4.1.2272.1.64.1.1.3.1.1 | ColumnrcSlppPortIfIndex | not-accessible | current | Port on which simple loop detection occurs on. |
| 1.3.6.1.4.1.2272.1.64.1.1.3.1.2 | ColumnrcSlppPortPktRxThreshold | read-write | current | Once the number of SLPP packets received on this port reaches this threshold action will be taken.Normally, the port will be shutdown. |
| 1.3.6.1.4.1.2272.1.64.1.1.3.1.3 | ColumnrcSlppPortSlppEnable | read-write | current | Flag to indicate whether the port entry is active or not for SLPP. |
| 1.3.6.1.4.1.2272.1.64.1.1.3.1.4 | ColumnrcSlppPortRowStatus | read-create | current | Used to create/delete entries. |
| 1.3.6.1.4.1.2272.1.64.1.1.3.1.5 | ColumnrcSlppPortIncomingVlanId | read-only | current | Vlan id of the classified packet on the port brought down by SLPP. |
| 1.3.6.1.4.1.2272.1.64.1.1.3.1.6 | ColumnrcSlppPortSrcNodeType | read-only | current | The src node type of the received slpp Pkt. |
| 1.3.6.1.4.1.2272.1.64.1.1.3.1.7 | ColumnrcSlppPortPktRxCount | read-only | current | Total number of SLPP packets received on the port. |
| 1.3.6.1.4.1.2272.1.64.1.1.3.1.8 | ColumnrcSlppPortGuardEnable | read-write | current | Flag to indicate if SLPP-guard is enabled on the port. |
| 1.3.6.1.4.1.2272.1.64.1.1.3.1.9 | ColumnrcSlppPortGuardTimeout | read-write | current | This value specifies the time period for which a port will remain disabled. When SLPP-guard disables a port, after this time period expires, the port will beco… |
| 1.3.6.1.4.1.2272.1.64.1.1.3.1.10 | ColumnrcSlppPortGuardStatus | read-only | current | The object indicates the SLPP-guard status of a port. |
| 1.3.6.1.4.1.2272.1.64.1.1.3.1.11 | ColumnrcSlppPortGuardTimerCount | read-only | current | This value specifies the time period that has passed since a port was operationally disabled by SLPP-guard. When this object reaches the timeout value (rcSlppP… |
| 1.3.6.1.4.1.2272.1.64.1.1.3.1.12 | ColumnrcSlppPortTimeToClrPktRxCount | read-write | current | Time to clear the SLPP Rx PDU counter. This has a default value of 21600 seconds. Once SLPP is enabled and port starts receiving SLPP PDUs, a timer is started … |
| 1.3.6.1.4.1.2272.1.64.1.1.3.1.13 | ColumnrcSlppPortRemainingTimeToClrPktRxCount | read-only | current | Remaining time to clear the SLPP Rx PDU counter. It is calculated using rcSlppPortTimeToClrPktRxCount and has a granularity of 5 seconds. |
| 1.3.6.1.4.1.2272.1.64.1.1.3.1.14 | ColumnrcSlppPortClearPktRxCount | read-write | current | Clear the SLPP Rx PDU counter. |
| 1.3.6.1.4.1.2272.1.64.1.2 | NodercSlppNotificationObjects | |||
| 1.3.6.1.4.1.2272.1.64.1.2.1 | ScalarrcSlppIncomingVlanId | accessible-for-notify | current | Vlan id of the classified packet on the port brought down by SLPP. |
| 1.3.6.1.4.1.2272.1.64.1.2.2 | ScalarrcSlppSrcMacAddress | accessible-for-notify | current | Source MAC address in the classified packet on the port brought down by SLPP. |
| 1.3.6.1.4.1.2272.1.64.1.2.3 | ScalarrcSlppRxPortIndex | accessible-for-notify | current | Port on which the SLPP packet is received. |
| 1.3.6.1.4.1.2272.1.64.1.2.4 | ScalarrcSlppRxVlanId | accessible-for-notify | current | Vlan on which the SLPP packet is received. |
| 1.3.6.1.4.1.2272.1.64.1.2.5 | ScalarrcSlppTxVlanId | accessible-for-notify | current | Vlan on which the SLPP packet is sent. |
| 1.3.6.1.4.1.2272.1.64.1.2.6 | ScalarrcSlppGuardPortIfIndex | accessible-for-notify | current | Port on which the SLPP-guard packet is received. |
| 1.3.6.1.4.1.2272.1.65 | NodercTacacs | |||
| 1.3.6.1.4.1.2272.1.65.1 | NodercTacacsGlobal | |||
| 1.3.6.1.4.1.2272.1.65.1.1 | ScalarrcTacacsGlobalEnable | read-write | current | Enable/disable this feature. |
| 1.3.6.1.4.1.2272.1.65.1.2 | ScalarrcTacacsGlobalLastUserName | read-only | current | The last user for which authentication was attempted using TACACS+. |
| 1.3.6.1.4.1.2272.1.65.1.3 | ScalarrcTacacsGlobalLastAddressType | read-only | current | The type of address for the TACACS+ server that was most recently accessed |
| 1.3.6.1.4.1.2272.1.65.1.4 | ScalarrcTacacsGlobalLastAddress | read-only | current | The address of the TACACS+ server that was most recently accessed |
| 1.3.6.1.4.1.2272.1.65.1.5 | ScalarrcTacacsAccounting | read-write | current | Determines which application will be accounted by tacacs+. |
| 1.3.6.1.4.1.2272.1.65.1.6 | ScalarrcTacacsAuthentication | read-write | current | Determines which application will be authenticated by tacacs+. |
| 1.3.6.1.4.1.2272.1.65.1.7 | ScalarrcTacacsNncliCommandAuthorizationEnabled | read-write | current | This object controls whether TACACS+ will be used for authorization of individual NNCLI commands. |
| 1.3.6.1.4.1.2272.1.65.1.8 | ScalarrcTacacsNncliCommandAuthorizationLevels | read-write | current | This object controls which NNCLI command privilege levels will be authorized by TACACS+. |
| 1.3.6.1.4.1.2272.1.65.2 | TablercTacacsServerTable | not-accessible | current | The (conceptual) table listing the TACACS+ servers with which the client shares a secret. |
| 1.3.6.1.4.1.2272.1.65.2.1 | RowrcTacacsServerEntry | not-accessible | current | An entry (conceptual row) representing a TACACS+ server with which the client shares a secret. |
| 1.3.6.1.4.1.2272.1.65.2.1.1 | ColumnrcTacacsServerAddressType | not-accessible | current | Specifies the type of IP address used on the Tacacs+ server. |
| 1.3.6.1.4.1.2272.1.65.2.1.2 | ColumnrcTacacsServerAddress | not-accessible | current | The IP address of the TACACS+ server referred to in this table entry. |
| 1.3.6.1.4.1.2272.1.65.2.1.3 | ColumnrcTacacsServerPortNumber | read-create | current | The TCP port on which the client establishes a connection to the server. A value of 0 indicates that the system specified default value is used. |
| 1.3.6.1.4.1.2272.1.65.2.1.4 | ColumnrcTacacsServerConnectionType | read-create | current | Specifies TCP connection type between device and TACACS+ server. Either a single open connection between a device and server (SingleConnection), or open/close … |
| 1.3.6.1.4.1.2272.1.65.2.1.5 | ColumnrcTacacsServerConnectionStatus | read-only | current | Specifies status TCP connection type between device and TACACS+ server. |
| 1.3.6.1.4.1.2272.1.65.2.1.6 | ColumnrcTacacsServerTimeout | read-create | current | The maximum time (in seconds) to wait for this TACACS+ server to reply. |
| 1.3.6.1.4.1.2272.1.65.2.1.7 | ColumnrcTacacsServerKey | read-create | current | Secret key to be shared with this TACACS+ server. If the key length is zero that indicates no encryption is being used. |
| 1.3.6.1.4.1.2272.1.65.2.1.8 | ColumnrcTacacsServerSourceIpInterfaceEnabled | read-create | current | Specifies whether source address specification is enabled. |
| 1.3.6.1.4.1.2272.1.65.2.1.9 | ColumnrcTacacsServerSourceIpInterfaceType | read-create | current | Specifies the type of IP address used on the interface that connects to the Tacacs+ server. If this value is unknown(0), then a system-wide default value will … |
| 1.3.6.1.4.1.2272.1.65.2.1.10 | ColumnrcTacacsServerSourceIpInterface | read-create | current | IP address of the interface to use with this server. |
| 1.3.6.1.4.1.2272.1.65.2.1.11 | ColumnrcTacacsServerPriority | read-create | current | Determines the order in which the TACACS+ servers will be used, when 1 is the highest priority. If more than one server share the same priority - they will be … |
| 1.3.6.1.4.1.2272.1.65.2.1.12 | ColumnrcTacacsServerRowStatus | read-create | current | The row status variable, can be set to destroy or createAndGo. |
| 1.3.6.1.4.1.2272.1.66 | NodercIpfix | |||
| 1.3.6.1.4.1.2272.1.66.1 | NodercIpfixMib | |||
| 1.3.6.1.4.1.2272.1.66.1.1 | NodercIpfixConfGlobal | |||
| 1.3.6.1.4.1.2272.1.66.1.1.1 | ScalarrcIpfixConfState | read-write | current | Enables/Disables the state of ipfix on the box. |
| 1.3.6.1.4.1.2272.1.66.1.1.2 | ScalarrcIpfixRunningState | read-only | current | Show Enable/Disable running state of ipfix on the box. |
| 1.3.6.1.4.1.2272.1.66.1.2 | NodercIpfixTable | |||
| 1.3.6.1.4.1.2272.1.66.1.2.1 | TablercIpfixConfSlotTable | not-accessible | current | A table to store the configuration details for IPFIX for each slot. This table is indexed by slot number. |
| 1.3.6.1.4.1.2272.1.66.1.2.1.1 | RowrcIpfixConfSlotEntry | not-accessible | current | One Entry holding IPFIX config information on slot basis. |
| 1.3.6.1.4.1.2272.1.66.1.2.1.1.1 | ColumnrcIpfixConfSlotNum | not-accessible | current | Slot number |
| 1.3.6.1.4.1.2272.1.66.1.2.1.1.2 | ColumnrcIpfixConfSlotAgingIntv | read-write | current | Flow record aging interval (Value in seconds). |
| 1.3.6.1.4.1.2272.1.66.1.2.1.1.3 | ColumnrcIpfixConfSlotActiveTimeout | read-write | current | Flow record active timeout value (Value in mins). |
| 1.3.6.1.4.1.2272.1.66.1.2.1.1.4 | ColumnrcIpfixConfSlotExportIntv | read-write | current | Frequency of flow export to collector (Value in sec). |
| 1.3.6.1.4.1.2272.1.66.1.2.1.1.5 | ColumnrcIpfixConfSlotExportState | read-write | current | State of exporter. |
| 1.3.6.1.4.1.2272.1.66.1.2.1.1.6 | ColumnrcIpfixConfSlotTempRefIntvSec | read-write | current | Template refresh timeout. Template is sent out to the collector at least every x seconds or every y exported packets, whichever occurs first. |
| 1.3.6.1.4.1.2272.1.66.1.2.1.1.7 | ColumnrcIpfixConfSlotTempRefIntvPkts | read-write | current | Template refresh timeout. Template is sent out to the collector at least every x seconds or every y exported packets, whichever occurs first. |
| 1.3.6.1.4.1.2272.1.66.1.2.2 | TablercIpfixCollectorTable | not-accessible | current | Table to store the configuration details for IPFIX collector for each slot. This table is indexed by slot number and ip address. |
| 1.3.6.1.4.1.2272.1.66.1.2.2.1 | RowrcIpfixCollectorEntry | not-accessible | current | One entry holds IPFIX collector config information based on slot info and collector ip address. |
| 1.3.6.1.4.1.2272.1.66.1.2.2.1.1 | ColumnrcIpfixCollectorSlotNum | not-accessible | current | Slot number. An index to the CollectorEntry. |
| 1.3.6.1.4.1.2272.1.66.1.2.2.1.2 | ColumnrcIpfixCollectorAddressType | not-accessible | current | IP address type of the collector. An index to the CollectorEntry. |
| 1.3.6.1.4.1.2272.1.66.1.2.2.1.3 | ColumnrcIpfixCollectorAddress | not-accessible | current | IP address of the collector. An index to the CollectorEntry. |
| 1.3.6.1.4.1.2272.1.66.1.2.2.1.4 | ColumnrcIpfixCollectorProtocol | read-create | current | Protocol for export data from exporter to collector . |
| 1.3.6.1.4.1.2272.1.66.1.2.2.1.5 | ColumnrcIpfixCollectorDestPort | read-create | current | Dest port to send the requests. |
| 1.3.6.1.4.1.2272.1.66.1.2.2.1.6 | ColumnrcIpfixCollectorExporterIpType | read-create | current | Ip address type of the exporter for collector. |
| 1.3.6.1.4.1.2272.1.66.1.2.2.1.7 | ColumnrcIpfixCollectorExporterIp | read-create | current | Ip address of the exporter for collector. |
| 1.3.6.1.4.1.2272.1.66.1.2.2.1.8 | ColumnrcIpfixCollectorProtoVer | read-create | current | This specifies the protocol version for ipfix. |
| 1.3.6.1.4.1.2272.1.66.1.2.2.1.9 | ColumnrcIpfixCollectorState | read-create | current | State of the particular collector. Enable is true by default. |
| 1.3.6.1.4.1.2272.1.66.1.2.2.1.10 | ColumnrcIpfixCollectorRowStatus | read-create | current | Used to create/delete entries. |
| 1.3.6.1.4.1.2272.1.66.1.2.3 | TablercIpfixConfPortTable | not-accessible | current | A table to store the configuration details for IPFIX for each port. This table is indexed by port number. |
| 1.3.6.1.4.1.2272.1.66.1.2.3.1 | RowrcIpfixConfPortEntry | not-accessible | current | Entry holding IPFIX config information per port. |
| 1.3.6.1.4.1.2272.1.66.1.2.3.1.1 | ColumnrcIpfixConfPortId | not-accessible | current | An index to the IpfixConfPortEntry, a unique identifier of the portId |
| 1.3.6.1.4.1.2272.1.66.1.2.3.1.2 | ColumnrcIpfixConfPortSampleRate | read-write | current | Used to configure the sampling rate. Sample one in every N packets. |
| 1.3.6.1.4.1.2272.1.66.1.2.3.1.3 | ColumnrcIpfixConfPortHashPolyCoeffs | read-write | current | Command to set hash polynomial coeffs. |
| 1.3.6.1.4.1.2272.1.66.1.2.3.1.4 | ColumnrcIpfixConfPortHashPolySeed | read-write | current | Command to set hash polynomial seed. |
| 1.3.6.1.4.1.2272.1.66.1.2.3.1.5 | ColumnrcIpfixConfPortFlush | read-write | current | This is used to delete all records stored in COP, or to initiate an export of all records and delete data base after the export is finished. |
| 1.3.6.1.4.1.2272.1.66.1.2.3.1.6 | ColumnrcIpfixConfPortAllTraffic | read-write | current | This is used to enable/disable ipfix on all trafiic, for the specified port. |
| 1.3.6.1.4.1.2272.1.66.1.2.3.1.7 | ColumnrcIpfixConfPortHashKeyId | read-write | current | hash key id. |
| 1.3.6.1.4.1.2272.1.66.1.2.3.1.8 | ColumnrcIpfixConfPortDynamicSampRate | read-only | current | Indicates the dynamic sampling rate. |
| 1.3.6.1.4.1.2272.1.66.1.2.4 | TablercIpfixHashStatsTable | not-accessible | current | A table of hash Statistics entries to store the statistics for each slot. This table is indexed by the slot number. |
| 1.3.6.1.4.1.2272.1.66.1.2.4.1 | RowrcIpfixHashStatsEntry | not-accessible | current | Entry containing hash statistics information for a particular slot. |
| 1.3.6.1.4.1.2272.1.66.1.2.4.1.1 | ColumnrcIpfixHashStatsSlotNum | not-accessible | current | A unique identifier for the table. |
| 1.3.6.1.4.1.2272.1.66.1.2.4.1.2 | ColumnrcIpfixHashStatsHashOverflows | read-only | current | Count of hash overflows per slot. |
| 1.3.6.1.4.1.2272.1.66.1.2.4.1.3 | ColumnrcIpfixHashStatsHashDrops | read-only | current | Count of hash drops per slot. |
| 1.3.6.1.4.1.2272.1.66.1.2.4.1.4 | ColumnrcIpfixHashStatsClear | read-write | current | Setting this object will clear hash statistics for a slot. |
| 1.3.6.1.4.1.2272.1.66.1.2.4.1.5 | ColumnrcIpfixHashStatsClearTime | read-only | current | The value of sysUpTime when the hash statistics were last cleared. |
| 1.3.6.1.4.1.2272.1.66.1.2.5 | TablercIpfixExporterStatsTable | not-accessible | current | A table of Exporter Statistics entries to store the statistics for each slot, each collector. This table is indexed by the slot number and collector address. |
| 1.3.6.1.4.1.2272.1.66.1.2.5.1 | RowrcIpfixExporterStatsEntry | not-accessible | current | Entry containing Exporter statistics information for a particular slot and particular collector. |
| 1.3.6.1.4.1.2272.1.66.1.2.5.1.1 | ColumnrcIpfixExporterStatsSlotNum | not-accessible | current | Index for the table, slot number. |
| 1.3.6.1.4.1.2272.1.66.1.2.5.1.2 | ColumnrcIpfixExporterStatsCollectorType | not-accessible | current | Collector IP address type. This is an index for the table. |
| 1.3.6.1.4.1.2272.1.66.1.2.5.1.3 | ColumnrcIpfixExporterStatsCollector | not-accessible | current | Index for the table, collector address. |
| 1.3.6.1.4.1.2272.1.66.1.2.5.1.4 | ColumnrcIpfixExporterStatsOutPkts | read-only | current | Number of Packets sent. |
| 1.3.6.1.4.1.2272.1.66.1.2.5.1.5 | ColumnrcIpfixExporterStatsOutOctets | read-only | current | Number of Bytes sent. |
| 1.3.6.1.4.1.2272.1.66.1.2.5.1.6 | ColumnrcIpfixExporterStatsPktsLoss | read-only | current | Number of Records lost. |
| 1.3.6.1.4.1.2272.1.66.1.2.5.1.7 | ColumnrcIpfixExporterStatsClear | read-write | current | Setting this object will clear exporter statistics. |
| 1.3.6.1.4.1.2272.1.66.1.2.5.1.8 | ColumnrcIpfixExporterStatsClearTime | read-only | current | The value of sysUpTime when exporter statistics were last cleared. |
| 1.3.6.1.4.1.2272.1.67 | NodercOspfv3 | |||
| 1.3.6.1.4.1.2272.1.67.1 | NodercOspfv3Mib | |||
| 1.3.6.1.4.1.2272.1.67.1.1 | NodercOspfv3Objects | |||
| 1.3.6.1.4.1.2272.1.67.1.1.1 | NodercOspfv3GeneralGroup | |||
| 1.3.6.1.4.1.2272.1.67.1.1.1.1 | ScalarrcOspfv3RouterId | read-write | current | A 32-bit integer uniquely identifying the router in the Autonomous System. To ensure uniqueness, this may default to the value of one of the router's IPv4 inte… |
| 1.3.6.1.4.1.2272.1.67.1.1.1.2 | ScalarrcOspfv3AdminStat | read-write | current | The administrative status of OSPFv3 in the router. The value 'enabled' denotes that the OSPFv3 Process is active on at least one inter- face; 'disabled' disabl… |
| 1.3.6.1.4.1.2272.1.67.1.1.1.3 | ScalarrcOspfv3VersionNumber | read-only | current | The version number of OSPF for IPv6 is 3. |
| 1.3.6.1.4.1.2272.1.67.1.1.1.4 | ScalarrcOspfv3AreaBdrRtrStatus | read-only | current | A flag to note whether this router is an area border router. |
| 1.3.6.1.4.1.2272.1.67.1.1.1.5 | ScalarrcOspfv3ASBdrRtrStatus | read-write | current | A flag to note whether this router is config- ured as an Autonomous System border router. |
| 1.3.6.1.4.1.2272.1.67.1.1.1.6 | ScalarrcOspfv3AsScopeLsaCount | read-only | current | The number of AS-Scope (e.g. AS-External) link-state advertisements in the link-state database. |
| 1.3.6.1.4.1.2272.1.67.1.1.1.7 | ScalarrcOspfv3AsScopeLsaCksumSum | read-only | current | The 32-bit unsigned sum of the LS checksums of the AS-scoped link-state advertisements con- tained in the link-state database. This sum can be used to determin… |
| 1.3.6.1.4.1.2272.1.67.1.1.1.8 | ScalarrcOspfv3OriginateNewLsas | read-only | current | The number of new link-state advertisements that have been originated. This number is in- cremented each time the router originates a new LSA. |
| 1.3.6.1.4.1.2272.1.67.1.1.1.9 | ScalarrcOspfv3RxNewLsas | read-only | current | The number of link-state advertisements re- ceived determined to be new instantiations. This number does not include newer instantia- tions of self-originated … |
| 1.3.6.1.4.1.2272.1.67.1.1.1.10 | ScalarrcOspfv3ExtLsaCount | read-only | current | The number of External(LS type 0x4005) in the link- state database |
| 1.3.6.1.4.1.2272.1.67.1.1.1.11 | ScalarrcOspfv3ExtAreaLsdbLimit | read-write | current | The maximum number of non-default AS- external-LSAs entries that can be stored in the link-state database. If the value is -1, then there is no limit. When the… |
| 1.3.6.1.4.1.2272.1.67.1.1.1.12 | ScalarrcOspfv3MulticastExtensions | read-write | obsolete | A Bit Mask indicating whether the router is forwarding IPv6 multicast datagrams based on the algorithms defined in the Multi- cast Extensions to OSPF. If intra… |
| 1.3.6.1.4.1.2272.1.67.1.1.1.13 | ScalarrcOspfv3ExitOverflowInterval | read-write | current | The number of seconds that, after entering OverflowState, a router will attempt to leave OverflowState. This allows the router to again originate non-default A… |
| 1.3.6.1.4.1.2272.1.67.1.1.1.14 | ScalarrcOspfv3DemandExtensions | read-write | current | The router's support for demand routing. |
| 1.3.6.1.4.1.2272.1.67.1.1.1.15 | ScalarrcOspfv3TrafficEngineeringSupport | read-write | current | The router's support for traffic engineering extensions. |
| 1.3.6.1.4.1.2272.1.67.1.1.1.16 | ScalarrcOspfv3ReferenceBandwidth | read-write | current | Reference bandwidth in kilobits/second for calculating default interface metrics. The default value is 100,000 KBPS (100 MBPS) |
| 1.3.6.1.4.1.2272.1.67.1.1.1.17 | ScalarrcOspfv3RestartSupport | read-write | current | The router's support for OSPF hitless restart. Options include: no restart support, only planned restarts or both planned and unplanned restarts. |
| 1.3.6.1.4.1.2272.1.67.1.1.1.18 | ScalarrcOspfv3RestartInterval | read-write | current | Configured OSPF hitless restart timeout interval. |
| 1.3.6.1.4.1.2272.1.67.1.1.1.19 | ScalarrcOspfv3RestartStatus | read-only | current | Current status of OSPF hitless restart. |
| 1.3.6.1.4.1.2272.1.67.1.1.1.20 | ScalarrcOspfv3RestartAge | read-only | current | Remaining time in current OSPF hitless restart interval. |
| 1.3.6.1.4.1.2272.1.67.1.1.1.21 | ScalarrcOspfv3RestartExitReason | read-only | current | Describes the outcome of the last attempt at a hitless restart. If the value is 'none', no restart has yet been attempted. If the value is 'inProgress', a rest… |
| 1.3.6.1.4.1.2272.1.67.1.1.1.22 | ScalarrcOspfv3BadLsaIgnore | read-write | current | The administrative status of OSPFv3 in the router. The value 'enabled' denotes that the OSPFv3 Process is active on at least one inter- face; 'disabled' disabl… |
| 1.3.6.1.4.1.2272.1.67.1.1.1.23 | ScalarrcOspfv3HelperModeDisable | read-write | current | Disables Graceful Restart Helper Mode feature. The feature is enabled by default (so this flag is disabled by default). |
| 1.3.6.1.4.1.2272.1.67.1.1.1.24 | NodercOspfv3DefaultMetric | |||
| 1.3.6.1.4.1.2272.1.67.1.1.1.24.1 | ScalarrcOspfv3DefaultMetric10MegPort | read-write | current | Used to indicate the cost associated with 10Meg Interface(Port). |
| 1.3.6.1.4.1.2272.1.67.1.1.1.24.2 | ScalarrcOspfv3DefaultMetric100MegPort | read-write | current | Used to indicate the cost associated with 100Meg Interface(Port). |
| 1.3.6.1.4.1.2272.1.67.1.1.1.24.3 | ScalarrcOspfv3DefaultMetric1000MegPort | read-write | current | Used to indicate the cost associated with 1000Meg Interface(Port). |
| 1.3.6.1.4.1.2272.1.67.1.1.1.24.4 | ScalarrcOspfv3DefaultMetric10000MegPort | read-write | current | Used to indicate the cost associated with 10000Meg Interface(Port). |
| 1.3.6.1.4.1.2272.1.67.1.1.1.24.5 | ScalarrcOspfv3DefaultMetric40000MegPort | read-write | current | Used to indicate the cost associated with 40000Meg Interface(Port). |
| 1.3.6.1.4.1.2272.1.67.1.1.1.24.6 | ScalarrcOspfv3DefaultMetricVlan | read-write | current | Used to indicate the cost associated with Vlan Interface |
| 1.3.6.1.4.1.2272.1.67.1.1.1.24.7 | ScalarrcOspfv3DefaultMetric100000MegPort | read-write | current | Used to indicate the cost associated with 100000Meg Interface(Port). |
| 1.3.6.1.4.1.2272.1.67.1.1.1.24.8 | ScalarrcOspfv3DefaultMetric25000MegPort | read-write | current | Used to indicate the cost associated with 25000Meg Interface(Port). |
| 1.3.6.1.4.1.2272.1.67.1.1.2 | TablercOspfv3AreaTable | not-accessible | current | Information describing the configured parame- ters and cumulative statistics of the router's attached areas. |
| 1.3.6.1.4.1.2272.1.67.1.1.2.1 | RowrcOspfv3AreaEntry | not-accessible | current | Information describing the configured parame- ters and cumulative statistics of one of the router's attached areas. |
| 1.3.6.1.4.1.2272.1.67.1.1.2.1.1 | ColumnrcOspfv3AreaId | not-accessible | current | A 32-bit integer uniquely identifying an area. Area ID 0.0.0.0 is used for the OSPFv3 backbone. |
| 1.3.6.1.4.1.2272.1.67.1.1.2.1.2 | ColumnrcOspfv3ImportAsExtern | read-write | current | Indicates whether an area is a Stub area, NSSA, or standard area. AS-scope LSAs are not imported into Stub Areas or NSSAs. NSSAs import AS-External data as Typ… |
| 1.3.6.1.4.1.2272.1.67.1.1.2.1.3 | ColumnrcOspfv3AreaSpfRuns | read-only | current | The number of times that the intra-area route table has been calculated using this area's link-state database. This is typically done using Dijkstra's algorith… |
| 1.3.6.1.4.1.2272.1.67.1.1.2.1.4 | ColumnrcOspfv3AreaBdrRtrCount | read-only | current | The total number of area border routers reach- able within this area. This is initially zero, and is calculated in each SPF Pass. |
| 1.3.6.1.4.1.2272.1.67.1.1.2.1.5 | ColumnrcOspfv3AreaAsBdrRtrCount | read-only | current | The total number of Autonomous System border routers reachable within this area. This is initially zero, and is calculated in each SPF Pass. |
| 1.3.6.1.4.1.2272.1.67.1.1.2.1.6 | ColumnrcOspfv3AreaScopeLsaCount | read-only | current | The total number of Area-Scope link-state advertisements in this area's link-state database. |
| 1.3.6.1.4.1.2272.1.67.1.1.2.1.7 | ColumnrcOspfv3AreaScopeLsaCksumSum | read-only | current | The 32-bit unsigned sum of the Area-Scope link-state advertisements' LS checksums contained in this area's link-state database. The sum can be used to determin… |
| 1.3.6.1.4.1.2272.1.67.1.1.2.1.8 | ColumnrcOspfv3AreaSummary | read-write | current | The variable rcOspfv3AreaSummary controls the im- port of Inter-Area LSAs into stub areas. It has no effect on other areas. If it is noAreaSummary, the router … |
| 1.3.6.1.4.1.2272.1.67.1.1.2.1.9 | ColumnrcOspfv3AreaStatus | read-create | current | This variable controls the status of the en- try. The use of RowStatus is covered in more detail in [6]. |
| 1.3.6.1.4.1.2272.1.67.1.1.2.1.10 | ColumnrcOspfv3StubMetric | read-write | current | The metric value advertised for the default route into Stub and NSSA areas. |
| 1.3.6.1.4.1.2272.1.67.1.1.2.1.11 | ColumnrcOspfv3AreaNssaTranslatorRole | read-write | current | Indicates an NSSA Border router's ability to perform NSSA translation of type-7 LSAs into type-5 LSAs. |
| 1.3.6.1.4.1.2272.1.67.1.1.2.1.12 | ColumnrcOspfv3AreaNssaTranslatorState | read-only | current | Indicates if and how an NSSA Border router is performing NSSA translation of type-7 LSAs into type-5 LSAs. When this object is set to enabled, the NSSA Border … |
| 1.3.6.1.4.1.2272.1.67.1.1.2.1.13 | ColumnrcOspfv3AreaNssaTranslatorStabilityInterval | read-write | current | The number of seconds after an elected translator determines its services are no longer required, that it should continue to perform its translation duties. |
| 1.3.6.1.4.1.2272.1.67.1.1.2.1.14 | ColumnrcOspfv3AreaNssaTranslatorEvents | read-only | current | Indicates the number of Translator State changes that have occurred since the last boot-up. |
| 1.3.6.1.4.1.2272.1.67.1.1.2.1.15 | ColumnrcOspfv3AreaStubMetricType | read-write | current | This variable displays the type of metric ad- vertised as a default route. |
| 1.3.6.1.4.1.2272.1.67.1.1.3 | TablercOspfv3AsLsdbTable | not-accessible | current | The OSPFv3 Process's AS-Scope Link State Database. |
| 1.3.6.1.4.1.2272.1.67.1.1.3.1 | RowrcOspfv3AsLsdbEntry | not-accessible | current | A single AS-Scope Link State Advertisement. |
| 1.3.6.1.4.1.2272.1.67.1.1.3.1.1 | ColumnrcOspfv3AsLsdbType | not-accessible | current | The type of the link state advertisement. Each link state type has a separate advertise- ment format. AS-Scope LSAs not recognized by the router may be stored … |
| 1.3.6.1.4.1.2272.1.67.1.1.3.1.2 | ColumnrcOspfv3AsLsdbRouterId | not-accessible | current | The 32 bit number that uniquely identifies the originating router in the Autonomous System. |
| 1.3.6.1.4.1.2272.1.67.1.1.3.1.3 | ColumnrcOspfv3AsLsdbLsid | not-accessible | current | The Link State ID is an LS Type Specific field containing a unique identifier; it identifies the piece of the routing domain that is being described by the adv… |
| 1.3.6.1.4.1.2272.1.67.1.1.3.1.4 | ColumnrcOspfv3AsLsdbSequence | read-only | current | The sequence number field is a signed 32-bit integer. It is used to detect old and dupli- cate link state advertisements. The space of sequence numbers is line… |
| 1.3.6.1.4.1.2272.1.67.1.1.3.1.5 | ColumnrcOspfv3AsLsdbAge | read-only | current | This field is the age of the link state adver- tisement in seconds. |
| 1.3.6.1.4.1.2272.1.67.1.1.3.1.6 | ColumnrcOspfv3AsLsdbChecksum | read-only | current | This field is the checksum of the complete contents of the advertisement, excepting the age field. The age field is excepted so that an advertisement's age can… |
| 1.3.6.1.4.1.2272.1.67.1.1.3.1.7 | ColumnrcOspfv3AsLsdbAdvertisement | read-only | current | The entire Link State Advertisement, including its header. |
| 1.3.6.1.4.1.2272.1.67.1.1.3.1.8 | ColumnrcOspfv3AsLsdbTypeKnown | read-only | current | Is the LSA type recognized by this Router? |
| 1.3.6.1.4.1.2272.1.67.1.1.4 | TablercOspfv3AreaLsdbTable | not-accessible | current | The OSPFv3 Process's Area-Scope Link State Database. |
| 1.3.6.1.4.1.2272.1.67.1.1.4.1 | RowrcOspfv3AreaLsdbEntry | not-accessible | current | A single Area-Scope Link State Advertisement. |
| 1.3.6.1.4.1.2272.1.67.1.1.4.1.1 | ColumnrcOspfv3AreaLsdbAreaId | not-accessible | current | The 32 bit identifier of the Area from which the LSA was received. |
| 1.3.6.1.4.1.2272.1.67.1.1.4.1.2 | ColumnrcOspfv3AreaLsdbType | not-accessible | current | The type of the link state advertisement. Each link state type has a separate advertise- ment format. Area-Scope LSAs unrecognized by the router are also store… |
| 1.3.6.1.4.1.2272.1.67.1.1.4.1.3 | ColumnrcOspfv3AreaLsdbRouterId | not-accessible | current | The 32 bit number that uniquely identifies the originating router in the Autonomous System. |
| 1.3.6.1.4.1.2272.1.67.1.1.4.1.4 | ColumnrcOspfv3AreaLsdbLsid | not-accessible | current | The Link State ID is an LS Type Specific field containing a unique identifier; it identifies the piece of the routing domain that is being described by the adv… |
| 1.3.6.1.4.1.2272.1.67.1.1.4.1.5 | ColumnrcOspfv3AreaLsdbSequence | read-only | current | The sequence number field is a signed 32-bit integer. It is used to detect old and dupli- cate link state advertisements. The space of sequence numbers is line… |
| 1.3.6.1.4.1.2272.1.67.1.1.4.1.6 | ColumnrcOspfv3AreaLsdbAge | read-only | current | This field is the age of the link state adver- tisement in seconds. |
| 1.3.6.1.4.1.2272.1.67.1.1.4.1.7 | ColumnrcOspfv3AreaLsdbChecksum | read-only | current | This field is the checksum of the complete contents of the advertisement, excepting the age field. The age field is excepted so that an advertisement's age can… |
| 1.3.6.1.4.1.2272.1.67.1.1.4.1.8 | ColumnrcOspfv3AreaLsdbAdvertisement | read-only | current | The entire Link State Advertisement, including its header. |
| 1.3.6.1.4.1.2272.1.67.1.1.4.1.9 | ColumnrcOspfv3AreaLsdbTypeKnown | read-only | current | Is the LSA type recognized by this Router? |
| 1.3.6.1.4.1.2272.1.67.1.1.5 | TablercOspfv3LinkLsdbTable | not-accessible | current | The OSPFv3 Process's Link-Scope Link State Database. |
| 1.3.6.1.4.1.2272.1.67.1.1.5.1 | RowrcOspfv3LinkLsdbEntry | not-accessible | current | A single Link-Scope Link State Advertisement. |
| 1.3.6.1.4.1.2272.1.67.1.1.5.1.1 | ColumnrcOspfv3LinkLsdbIfIndex | not-accessible | current | The identifier of the link from which the LSA was received. |
| 1.3.6.1.4.1.2272.1.67.1.1.5.1.2 | ColumnrcOspfv3LinkLsdbType | not-accessible | current | The type of the link state advertisement. Each link state type has a separate advertise- ment format. Link-Scope LSAs unrecognized by the router are also store… |
| 1.3.6.1.4.1.2272.1.67.1.1.5.1.3 | ColumnrcOspfv3LinkLsdbRouterId | not-accessible | current | The 32 bit number that uniquely identifies the originating router in the Autonomous System. |
| 1.3.6.1.4.1.2272.1.67.1.1.5.1.4 | ColumnrcOspfv3LinkLsdbLsid | not-accessible | current | The Link State ID is an LS Type Specific field containing a unique identifier; it identifies the piece of the routing domain that is being described by the adv… |
| 1.3.6.1.4.1.2272.1.67.1.1.5.1.5 | ColumnrcOspfv3LinkLsdbSequence | read-only | current | The sequence number field is a signed 32-bit integer. It is used to detect old and dupli- cate link state advertisements. The space of sequence numbers is line… |
| 1.3.6.1.4.1.2272.1.67.1.1.5.1.6 | ColumnrcOspfv3LinkLsdbAge | read-only | current | This field is the age of the link state advertisement in seconds. |
| 1.3.6.1.4.1.2272.1.67.1.1.5.1.7 | ColumnrcOspfv3LinkLsdbChecksum | read-only | current | This field is the checksum of the complete contents of the advertisement, excepting the age field. The age field is excepted so that an advertisement's age can… |
| 1.3.6.1.4.1.2272.1.67.1.1.5.1.8 | ColumnrcOspfv3LinkLsdbAdvertisement | read-only | current | The entire Link State Advertisement, including its header. |
| 1.3.6.1.4.1.2272.1.67.1.1.5.1.9 | ColumnrcOspfv3LinkLsdbTypeKnown | read-only | current | Indicates whether the LSA type is recognized by this Router. |
| 1.3.6.1.4.1.2272.1.67.1.1.6 | TablercOspfv3HostTable | not-accessible | current | The list of Hosts, and their metrics, that the router will advertise as host routes. |
| 1.3.6.1.4.1.2272.1.67.1.1.6.1 | RowrcOspfv3HostEntry | not-accessible | current | A metric to be advertised when a given host is reachable. |
| 1.3.6.1.4.1.2272.1.67.1.1.6.1.1 | ColumnrcOspfv3HostAddressType | not-accessible | current | The address type of rcOspfv3HostAddress. Only IPv6 addresses without zone index are expected. |
| 1.3.6.1.4.1.2272.1.67.1.1.6.1.2 | ColumnrcOspfv3HostAddress | not-accessible | current | The IPv6 Address of the Host. Must be a Global or Site-local address. |
| 1.3.6.1.4.1.2272.1.67.1.1.6.1.3 | ColumnrcOspfv3HostMetric | read-write | current | The Metric to be advertised. |
| 1.3.6.1.4.1.2272.1.67.1.1.6.1.4 | ColumnrcOspfv3HostStatus | read-create | current | This variable controls the status of the en- try. The use of RowStatus is covered in more detail in [6]. |
| 1.3.6.1.4.1.2272.1.67.1.1.6.1.5 | ColumnrcOspfv3HostAreaID | read-write | current | The Area the Host Entry is to be found within. By default, the area that a subsuming OSPFv3 in- terface is in, or 0.0.0.0 |
| 1.3.6.1.4.1.2272.1.67.1.1.7 | TablercOspfv3IfTable | not-accessible | current | The OSPFv3 Interface Table describes the inter- faces from the viewpoint of OSPFv3. |
| 1.3.6.1.4.1.2272.1.67.1.1.7.1 | RowrcOspfv3IfEntry | not-accessible | current | The OSPFv3 Interface Entry describes one inter- face from the viewpoint of OSPFv3. |
| 1.3.6.1.4.1.2272.1.67.1.1.7.1.1 | ColumnrcOspfv3IfIndex | not-accessible | current | The interface index of this OSPFv3 interface. It corresponds to the interface index of the IPv6 interface on which OSPFv3 is configured. |
| 1.3.6.1.4.1.2272.1.67.1.1.7.1.2 | ColumnrcOspfv3IfAreaId | read-write | current | A 32-bit integer uniquely identifying the area to which the interface connects. Area ID 0.0.0.0 is used for the OSPFv3 backbone. |
| 1.3.6.1.4.1.2272.1.67.1.1.7.1.3 | ColumnrcOspfv3IfType | read-write | current | The OSPFv3 interface type. |
| 1.3.6.1.4.1.2272.1.67.1.1.7.1.4 | ColumnrcOspfv3IfAdminStat | read-write | current | The OSPFv3 interface's administrative status. The value formed on the interface, and the in- terface will be advertised as an internal route to some area. The … |
| 1.3.6.1.4.1.2272.1.67.1.1.7.1.5 | ColumnrcOspfv3IfRtrPriority | read-write | current | The priority of this interface. Used in multi-access networks, this field is used in the designated router election algorithm. The value 0 signifies that the r… |
| 1.3.6.1.4.1.2272.1.67.1.1.7.1.6 | ColumnrcOspfv3IfTransitDelay | read-write | current | The estimated number of seconds it takes to transmit a link state update packet over this interface. |
| 1.3.6.1.4.1.2272.1.67.1.1.7.1.7 | ColumnrcOspfv3IfRetransInterval | read-write | current | The number of seconds between link-state ad- vertisement retransmissions, for adjacencies belonging to this interface. This value is also used when retransmitt… |
| 1.3.6.1.4.1.2272.1.67.1.1.7.1.8 | ColumnrcOspfv3IfHelloInterval | read-write | current | The length of time, in seconds, between the Hello packets that the router sends on the in- terface. This value must be the same for all routers attached to a c… |
| 1.3.6.1.4.1.2272.1.67.1.1.7.1.9 | ColumnrcOspfv3IfRtrDeadInterval | read-write | current | The number of seconds that a router's Hello packets have not been seen before it's neigh- bors declare the router down. This should be some multiple of the Hel… |
| 1.3.6.1.4.1.2272.1.67.1.1.7.1.10 | ColumnrcOspfv3IfPollInterval | read-write | current | The larger time interval, in seconds, between the Hello packets sent to an inactive non- broadcast multi- access neighbor. |
| 1.3.6.1.4.1.2272.1.67.1.1.7.1.11 | ColumnrcOspfv3IfState | read-only | current | The OSPFv3 Interface State. |
| 1.3.6.1.4.1.2272.1.67.1.1.7.1.12 | ColumnrcOspfv3IfDesignatedRouter | read-only | current | The Router ID of the Designated Router. |
| 1.3.6.1.4.1.2272.1.67.1.1.7.1.14 | ColumnrcOspfv3IfBackupDesignatedRouter | read-only | current | The Router ID of the Backup Designated Router. |
| 1.3.6.1.4.1.2272.1.67.1.1.7.1.15 | ColumnrcOspfv3IfEvents | read-only | current | The number of times this OSPF interface has changed its state, or an error has occurred. |
| 1.3.6.1.4.1.2272.1.67.1.1.7.1.17 | ColumnrcOspfv3IfStatus | read-create | current | This variable controls the status of the en- try. The use of RowStatus is covered in more detail in [6]. |
| 1.3.6.1.4.1.2272.1.67.1.1.7.1.18 | ColumnrcOspfv3IfMulticastForwarding | read-write | current | The way multicasts should forwarded on this interface; not forwarded, forwarded as data link multicasts, or forwarded as data link uni- casts. Data link multic… |
| 1.3.6.1.4.1.2272.1.67.1.1.7.1.19 | ColumnrcOspfv3IfDemand | read-write | current | Indicates whether Demand OSPFv3 procedures (hel- lo suppression to FULL neighbors and setting the DoNotAge flag on propagated LSAs) should be per- formed on th… |
| 1.3.6.1.4.1.2272.1.67.1.1.7.1.20 | ColumnrcOspfv3IfMetricValue | read-write | current | The metric assigned to this interface. The default value of the Metric is Reference Bandwidth / ifSpeed. The value of the reference bandwidth is configured by … |
| 1.3.6.1.4.1.2272.1.67.1.1.7.1.21 | ColumnrcOspfv3IfLinkScopeLsaCount | read-only | current | The total number of Link-Scope link-state advertisements in this link's link-state database. |
| 1.3.6.1.4.1.2272.1.67.1.1.7.1.22 | ColumnrcOspfv3IfLinkLsaCksumSum | read-only | current | The 32-bit unsigned sum of the Link-Scope link-state advertisements' LS checksums contained in this link's link-state database. The sum can be used to determin… |
| 1.3.6.1.4.1.2272.1.67.1.1.7.1.23 | ColumnrcOspfv3IfInstId | read-write | current | Enables multiple instances of OSPFv3 to be run over a single link. Each protocol instance would be assigned a separate ID. This ID has local link significance … |
| 1.3.6.1.4.1.2272.1.67.1.1.7.1.24 | ColumnrcOspfv3IfDemandNbrProbe | read-write | current | Indicates whether or not neighbor probing is enabled to determine whether or not the neighbor is inactive. Neighbor probing is disabled by default. |
| 1.3.6.1.4.1.2272.1.67.1.1.7.1.25 | ColumnrcOspfv3IfDemandNbrProbeRetxLimit | read-write | current | The number of consecutive LSA retransmissions before the neighbor is deemed inactive and the neighbor adjacency is brought down. |
| 1.3.6.1.4.1.2272.1.67.1.1.7.1.26 | ColumnrcOspfv3IfDemandNbrProbeInterval | read-write | current | Defines how often the neighbor will be probed. |
| 1.3.6.1.4.1.2272.1.67.1.1.7.1.27 | ColumnrcOspfv3IfBfdEnable | read-write | current | Used to enable/disable BFD for OSPFv3. |
| 1.3.6.1.4.1.2272.1.67.1.1.7.1.28 | ColumnrcOspfv3IfLinkLsaSuppression | read-create | current | Used to enable/disable link lsa suppression for OSPFv3. |
| 1.3.6.1.4.1.2272.1.67.1.1.8 | TablercOspfv3VirtIfTable | not-accessible | current | Information about this router's virtual inter- faces. |
| 1.3.6.1.4.1.2272.1.67.1.1.8.1 | RowrcOspfv3VirtIfEntry | not-accessible | current | Information about a single Virtual Interface. |
| 1.3.6.1.4.1.2272.1.67.1.1.8.1.1 | ColumnrcOspfv3VirtIfAreaId | not-accessible | current | The Transit Area that the Virtual Link traverses. By definition, this is not 0.0.0.0 |
| 1.3.6.1.4.1.2272.1.67.1.1.8.1.2 | ColumnrcOspfv3VirtIfNeighbor | not-accessible | current | The Router ID of the Virtual Neighbor. |
| 1.3.6.1.4.1.2272.1.67.1.1.8.1.3 | ColumnrcOspfv3VirtIfIndex | read-only | current | The interface ID assigned to this OSPFv3 virtual interface. It is advertised in Hello's sent over the virtal link and in the router's router-LSAs. |
| 1.3.6.1.4.1.2272.1.67.1.1.8.1.4 | ColumnrcOspfv3VirtIfTransitDelay | read-write | current | The estimated number of seconds it takes to transmit a link- state update packet over this interface. |
| 1.3.6.1.4.1.2272.1.67.1.1.8.1.5 | ColumnrcOspfv3VirtIfRetransInterval | read-write | current | The number of seconds between link-state ad- vertisement retransmissions, for adjacencies belonging to this interface. This value is also used when retransmitt… |
| 1.3.6.1.4.1.2272.1.67.1.1.8.1.6 | ColumnrcOspfv3VirtIfHelloInterval | read-write | current | The length of time, in seconds, between the Hello packets that the router sends on the in- terface. This value must be the same for the virtual neighbor. |
| 1.3.6.1.4.1.2272.1.67.1.1.8.1.7 | ColumnrcOspfv3VirtIfRtrDeadInterval | read-write | current | The number of seconds that a router's Hello packets have not been seen before it's neigh- bors declare the router down. This should be some multiple of the Hel… |
| 1.3.6.1.4.1.2272.1.67.1.1.8.1.8 | ColumnrcOspfv3VirtIfState | read-only | current | OSPF virtual interface states. |
| 1.3.6.1.4.1.2272.1.67.1.1.8.1.9 | ColumnrcOspfv3VirtIfEvents | read-only | current | The number of state changes or error events on this Virtual Link |
| 1.3.6.1.4.1.2272.1.67.1.1.8.1.10 | ColumnrcOspfv3VirtIfStatus | read-create | current | This variable controls the status of the en- try. The use of RowStatus is covered in more detail in [6]. |
| 1.3.6.1.4.1.2272.1.67.1.1.8.1.11 | ColumnrcOspfv3VirtIfLinkScopeLsaCount | read-only | current | The total number of Link-Scope link-state advertisements in this virtual link's link-state database. |
| 1.3.6.1.4.1.2272.1.67.1.1.8.1.12 | ColumnrcOspfv3VirtIfLinkLsaCksumSum | read-only | current | The 32-bit unsigned sum of the Link-Scope link-state advertisements' LS checksums contained in this virtual link's link-state database. The sum can be used to … |
| 1.3.6.1.4.1.2272.1.67.1.1.9 | TablercOspfv3NbrTable | not-accessible | current | A table of non-virtual neighbor information. |
| 1.3.6.1.4.1.2272.1.67.1.1.9.1 | RowrcOspfv3NbrEntry | not-accessible | current | The information regarding a single neighbor. |
| 1.3.6.1.4.1.2272.1.67.1.1.9.1.1 | ColumnrcOspfv3NbrIfIndex | not-accessible | current | The local link ID of the link over which the neighbor can be reached. |
| 1.3.6.1.4.1.2272.1.67.1.1.9.1.2 | ColumnrcOspfv3NbrRtrId | not-accessible | current | A 32-bit integer (represented as a type IpAd- dress) uniquely identifying the neighboring router in the Autonomous System. |
| 1.3.6.1.4.1.2272.1.67.1.1.9.1.3 | ColumnrcOspfv3NbrAddressType | read-only | current | The address type of rcOspfv3NbrAddress. Only IPv6 addresses without zone index are expected. |
| 1.3.6.1.4.1.2272.1.67.1.1.9.1.4 | ColumnrcOspfv3NbrAddress | read-only | current | The IPv6 address of the neighbor associated with the local link. |
| 1.3.6.1.4.1.2272.1.67.1.1.9.1.5 | ColumnrcOspfv3NbrOptions | read-only | current | A Bit Mask corresponding to the neighbor's op- tions field. |
| 1.3.6.1.4.1.2272.1.67.1.1.9.1.6 | ColumnrcOspfv3NbrPriority | read-only | current | The priority of this neighbor in the designat- ed router election algorithm. The value 0 sig- nifies that the neighbor is not eligible to be- come the designat… |
| 1.3.6.1.4.1.2272.1.67.1.1.9.1.7 | ColumnrcOspfv3NbrState | read-only | current | The State of the relationship with this Neigh- bor. |
| 1.3.6.1.4.1.2272.1.67.1.1.9.1.8 | ColumnrcOspfv3NbrEvents | read-only | current | The number of times this neighbor relationship has changed state, or an error has occurred. |
| 1.3.6.1.4.1.2272.1.67.1.1.9.1.9 | ColumnrcOspfv3NbrLsRetransQLen | read-only | current | The current length of the retransmission queue. |
| 1.3.6.1.4.1.2272.1.67.1.1.9.1.10 | ColumnrcOspfv3NbrHelloSuppressed | read-only | current | Indicates whether Hellos are being suppressed to the neighbor |
| 1.3.6.1.4.1.2272.1.67.1.1.9.1.11 | ColumnrcOspfv3NbrIfId | read-only | current | The interface ID that the neighbor advertises in its Hello Packets on this link, that is, the neighbor's local interface index. |
| 1.3.6.1.4.1.2272.1.67.1.1.9.1.12 | ColumnrcOspfv3NbrRestartHelperStatus | read-only | current | Indicates whether the router is acting as a hitless restart helper for the neighbor. |
| 1.3.6.1.4.1.2272.1.67.1.1.9.1.13 | ColumnrcOspfv3NbrRestartHelperAge | read-only | current | Remaining time in current OSPF hitless restart interval, if the router is acting as a restart helper for the neighbor. |
| 1.3.6.1.4.1.2272.1.67.1.1.9.1.14 | ColumnrcOspfv3NbrRestartHelperExitReason | read-only | current | Describes the outcome of the last attempt at acting as a hitless restart helper for the neighbor. |
| 1.3.6.1.4.1.2272.1.67.1.1.9.1.15 | ColumnrcOspfv3NbrDeadIntCnt | read-only | current | This is a Dead interval Count or TTL (time to live) field that indicates how many seconds are left before the Neighbor is declared down. The starting value is … |
| 1.3.6.1.4.1.2272.1.67.1.1.10 | TablercOspfv3NbmaNbrTable | not-accessible | current | A table of configured non-virtual neighbor information and neighbors dynamically discovered by lower-level protocols such as Inverse Neighbor Discovery. |
| 1.3.6.1.4.1.2272.1.67.1.1.10.1 | RowrcOspfv3NbmaNbrEntry | not-accessible | current | The information regarding a single configured neighbor or neighbor discovered by lower-level protocols such as Inverse Neighbor Discovery. |
| 1.3.6.1.4.1.2272.1.67.1.1.10.1.1 | ColumnrcOspfv3NbmaNbrIfIndex | not-accessible | current | The local link ID of the link over which the neighbor can be reached. |
| 1.3.6.1.4.1.2272.1.67.1.1.10.1.2 | ColumnrcOspfv3NbmaNbrAddress | not-accessible | current | The IPv6 address of the neighbor associated with the local link. |
| 1.3.6.1.4.1.2272.1.67.1.1.10.1.3 | ColumnrcOspfv3NbmaNbrPriority | read-write | current | The priority of this neighbor in the designat- ed router election algorithm. The value 0 sig- nifies that the neighbor is not eligible to be- come the designat… |
| 1.3.6.1.4.1.2272.1.67.1.1.10.1.4 | ColumnrcOspfv3NbmaNbrRtrId | read-only | current | A 32-bit integer (represented as a type IpAd- dress) uniquely identifying the neighboring router in the Autonomous System. A value of 0.0.0.0 is returned until… |
| 1.3.6.1.4.1.2272.1.67.1.1.10.1.5 | ColumnrcOspfv3NbmaNbrState | read-only | current | The State of the relationship with this Neigh- bor. |
| 1.3.6.1.4.1.2272.1.67.1.1.10.1.6 | ColumnrcOspfv3NbmaNbrStorageType | read-write | current | The storage type for this conceptual row. Conceptual rows having the value 'permanent' need not allow write-access to any columnar objects in the row. Manually… |
| 1.3.6.1.4.1.2272.1.67.1.1.10.1.7 | ColumnrcOspfv3NbmaNbrStatus | read-create | current | This variable controls the status of the en- try. The use of RowStatus is covered in more detail in [6]. |
| 1.3.6.1.4.1.2272.1.67.1.1.11 | TablercOspfv3VirtNbrTable | not-accessible | current | A table of virtual neighbor information. |
| 1.3.6.1.4.1.2272.1.67.1.1.11.1 | RowrcOspfv3VirtNbrEntry | not-accessible | current | Virtual neighbor information. |
| 1.3.6.1.4.1.2272.1.67.1.1.11.1.1 | ColumnrcOspfv3VirtNbrArea | not-accessible | current | The Transit Area Identifier. |
| 1.3.6.1.4.1.2272.1.67.1.1.11.1.2 | ColumnrcOspfv3VirtNbrRtrId | not-accessible | current | A 32-bit integer uniquely identifying the neighboring router in the Autonomous System. |
| 1.3.6.1.4.1.2272.1.67.1.1.11.1.3 | ColumnrcOspfv3VirtNbrIfIndex | read-only | current | The local interface ID for the virtual link over which the neighbor can be reached. |
| 1.3.6.1.4.1.2272.1.67.1.1.11.1.4 | ColumnrcOspfv3VirtNbrAddressType | read-only | current | The address type of rcOspfv3VirtNbrAddress. Only IPv6 addresses without zone index are expected. |
| 1.3.6.1.4.1.2272.1.67.1.1.11.1.5 | ColumnrcOspfv3VirtNbrAddress | read-only | current | The IPv6 address advertised by this Virtual Neighbor. It must be a Site-Local or Global scope address. |
| 1.3.6.1.4.1.2272.1.67.1.1.11.1.6 | ColumnrcOspfv3VirtNbrOptions | read-only | current | A Bit Mask corresponding to the neighbor's op- tions field. |
| 1.3.6.1.4.1.2272.1.67.1.1.11.1.7 | ColumnrcOspfv3VirtNbrState | read-only | current | The state of the Virtual Neighbor Relation- ship. |
| 1.3.6.1.4.1.2272.1.67.1.1.11.1.8 | ColumnrcOspfv3VirtNbrEvents | read-only | current | The number of times this virtual link has changed its state, or an error has occurred. |
| 1.3.6.1.4.1.2272.1.67.1.1.11.1.9 | ColumnrcOspfv3VirtNbrLsRetransQLen | read-only | current | The current length of the retransmission queue. |
| 1.3.6.1.4.1.2272.1.67.1.1.11.1.10 | ColumnrcOspfv3VirtNbrHelloSuppressed | read-only | current | Indicates whether Hellos are being suppressed to the neighbor |
| 1.3.6.1.4.1.2272.1.67.1.1.11.1.11 | ColumnrcOspfv3VirtNbrIfId | read-only | current | The interface ID that the neighbor advertises in its Hello Packets on this virtual link, that is, the neighbor's local interface ID. |
| 1.3.6.1.4.1.2272.1.67.1.1.11.1.12 | ColumnrcOspfv3VirtNbrRestartHelperStatus | read-only | current | Indicates whether the router is acting as a hitless restart helper for the neighbor. |
| 1.3.6.1.4.1.2272.1.67.1.1.11.1.13 | ColumnrcOspfv3VirtNbrRestartHelperAge | read-only | current | Remaining time in current OSPF hitless restart interval, if the router is acting as a restart helper for the neighbor. |
| 1.3.6.1.4.1.2272.1.67.1.1.11.1.14 | ColumnrcOspfv3VirtNbrRestartHelperExitReason | read-only | current | Describes the outcome of the last attempt at acting as a hitless restart helper for the neighbor. |
| 1.3.6.1.4.1.2272.1.67.1.1.12 | TablercOspfv3AreaAggregateTable | not-accessible | current | A range of IPv6 prefixes specified by a prefix/prefix length pair. Note that if ranges are configured such that one range sub- sumes another range the most spe… |
| 1.3.6.1.4.1.2272.1.67.1.1.12.1 | RowrcOspfv3AreaAggregateEntry | not-accessible | current | A range of IPv6 prefixes specified by a prefix/prefix length pair. Note that if ranges are configured such that one range sub- sumes another range the most spe… |
| 1.3.6.1.4.1.2272.1.67.1.1.12.1.1 | ColumnrcOspfv3AreaAggregateAreaID | not-accessible | current | The Area the Address Aggregate is to be found within. |
| 1.3.6.1.4.1.2272.1.67.1.1.12.1.2 | ColumnrcOspfv3AreaAggregateAreaLsdbType | not-accessible | current | The type of the Address Aggregate. This field specifies the Area Lsdb type that this Address Ag- gregate applies to. |
| 1.3.6.1.4.1.2272.1.67.1.1.12.1.3 | ColumnrcOspfv3AreaAggregatePrefix | not-accessible | current | The IPv6 Prefix. |
| 1.3.6.1.4.1.2272.1.67.1.1.12.1.4 | ColumnrcOspfv3AreaAggregatePrefixLength | not-accessible | current | The length of the prefix (in bits). A prefix can not be shorter than 3 bits. |
| 1.3.6.1.4.1.2272.1.67.1.1.12.1.5 | ColumnrcOspfv3AreaAggregateStatus | read-create | current | This variable controls the status of the en- try. The use of RowStatus is covered in more detail in [6]. |
| 1.3.6.1.4.1.2272.1.67.1.1.12.1.6 | ColumnrcOspfv3AreaAggregateEffect | read-write | current | Prefixes subsumed by ranges either trigger the advertisement of the indicated aggregate (ad- vertiseMatching), or result in the prefix not being advertised at … |
| 1.3.6.1.4.1.2272.1.67.1.1.12.1.7 | ColumnrcOspfv3AreaAggregateRouteTag | read-write | current | This tag is advertised only in the summarized As-External LSA when summarizing from type-7 to type-5. |
| 1.3.6.1.4.1.2272.1.67.1.1.12.1.8 | ColumnrcOspfv3AreaAggregateAdvertiseMetric | read-write | current | Used to specify a metric for a Summary LSA (type 3) generated by OSPF through an area range. If this metric is set to 0, OSPF uses the cost to the farthest poi… |
| 1.3.6.1.4.1.2272.1.67.1.1.13 | NodercOspfv3Stats | |||
| 1.3.6.1.4.1.2272.1.67.1.1.13.1 | ScalarrcOspfv3StatsTxPackets | read-only | current | Used to indicate the number of packets transmitted by OSPF. |
| 1.3.6.1.4.1.2272.1.67.1.1.13.2 | ScalarrcOspfv3StatsRxPackets | read-only | current | Used to indicate the number of packets received by OSPF. |
| 1.3.6.1.4.1.2272.1.67.1.1.13.3 | ScalarrcOspfv3StatsTxDropPackets | read-only | current | Used to indicate the number of packets dropped before transmitted by OSPF. |
| 1.3.6.1.4.1.2272.1.67.1.1.13.4 | ScalarrcOspfv3StatsRxDropPackets | read-only | current | Used to indicate the number of packets dropped before received by OSPF. |
| 1.3.6.1.4.1.2272.1.67.1.1.13.5 | ScalarrcOspfv3StatsRxBadPackets | read-only | current | Used to indicate the number of packets received by OSPF that are bad. |
| 1.3.6.1.4.1.2272.1.67.1.1.13.6 | ScalarrcOspfv3StatsSpfRuns | read-only | current | Used to indicate the total number of SPF calculations performed by OSPF, which also includes the number of partial route table calculation for Incremental Upda… |
| 1.3.6.1.4.1.2272.1.67.1.1.13.7 | ScalarrcOspfv3StatsLastSpfRun | read-only | current | Used to indicate the time(SysUpTime) since the last spf calculated by OSPF. |
| 1.3.6.1.4.1.2272.1.67.1.1.13.8 | ScalarrcOspfv3StatsLsdbTblSize | read-only | current | Used to indicate the number of entries in the linkstate database table. |
| 1.3.6.1.4.1.2272.1.67.1.1.13.9 | ScalarrcOspfv3StatsBadLsReqs | read-only | current | Used to indicate the number of bad ls requests. |
| 1.3.6.1.4.1.2272.1.67.1.1.13.10 | ScalarrcOspfv3StatsSeqMismatches | read-only | current | Used to indicate the number of sequence mismatched packets. |
| 1.3.6.1.4.1.2272.1.67.1.1.13.11 | ScalarrcOspfv3StatsRoutes | read-only | current | Used to indicate the number of OSPF routes added to RTM. |
| 1.3.6.1.4.1.2272.1.67.1.1.13.12 | ScalarrcOspfv3StatsAdjacencies | read-only | current | Used to indicate the number of adjacencies existing. |
| 1.3.6.1.4.1.2272.1.67.1.1.13.13 | ScalarrcOspfv3StatsAreas | read-only | current | Used to indicate the number of areas configured |
| 1.3.6.1.4.1.2272.1.67.1.1.13.14 | ScalarrcOspfv3StatsNbrs | read-only | current | Used to indicate the number of ospf neighbors |
| 1.3.6.1.4.1.2272.1.67.1.1.13.15 | ScalarrcOspfv3StatsReset | read-write | current | reset Ospfv3 global stats |
| 1.3.6.1.4.1.2272.1.67.1.2 | NodercOspfv3Conformance | |||
| 1.3.6.1.4.1.2272.1.67.1.2.1 | NodercOspfv3Groups | |||
| 1.3.6.1.4.1.2272.1.67.1.2.1.1 | GrouprcOspfv3BasicGroup | current | These objects are required for OSPFv3 systems. | |
| 1.3.6.1.4.1.2272.1.67.1.2.1.2 | GrouprcOspfv3AreaGroup | current | These objects are required for OSPFv3 systems supporting areas. | |
| 1.3.6.1.4.1.2272.1.67.1.2.1.3 | GrouprcOspfv3AsLsdbGroup | current | These objects are required for OSPFv3 systems that display their AS-scope link state database. | |
| 1.3.6.1.4.1.2272.1.67.1.2.1.4 | GrouprcOspfv3AreaLsdbGroup | current | These objects are required for OSPFv3 systems that display their Area-scope link state database. | |
| 1.3.6.1.4.1.2272.1.67.1.2.1.5 | GrouprcOspfv3LinkLsdbGroup | current | These objects are required for OSPFv3 systems that display their Link-scope link state database. | |
| 1.3.6.1.4.1.2272.1.67.1.2.1.6 | GrouprcOspfv3HostGroup | current | These objects are required for OSPFv3 systems that support attached hosts. | |
| 1.3.6.1.4.1.2272.1.67.1.2.1.7 | GrouprcOspfv3IfGroup | current | These interface objects are required for OSPFv3 systems. | |
| 1.3.6.1.4.1.2272.1.67.1.2.1.8 | GrouprcOspfv3VirtIfGroup | current | These virtual interface objects are required for OSPFv3 systems. | |
| 1.3.6.1.4.1.2272.1.67.1.2.1.9 | GrouprcOspfv3NbrGroup | current | These neighbor objects are required for OSPFv3 systems. | |
| 1.3.6.1.4.1.2272.1.67.1.2.1.10 | GrouprcOspfv3NbmaNbrGroup | current | These NBMA neighbor objects are required for OSPFv3 systems. | |
| 1.3.6.1.4.1.2272.1.67.1.2.1.11 | GrouprcOspfv3VirtNbrGroup | current | These virtual neighbor objects are required for OSPFv3 systems. | |
| 1.3.6.1.4.1.2272.1.67.1.2.1.12 | GrouprcOspfv3AreaAggregateGroup | current | These area aggregate objects are required for OSPFv3 systems. | |
| 1.3.6.1.4.1.2272.1.67.1.2.2 | NodercOspfv3Compliances | |||
| 1.3.6.1.4.1.2272.1.67.1.2.2.1 | CompliancercOspfv3Compliance | current | The compliance statement | |
| 1.3.6.1.4.1.2272.1.68 | NodercFlowClassifier | |||
| 1.3.6.1.4.1.2272.1.69 | NodercCfm | |||
| 1.3.6.1.4.1.2272.1.69.1 | TablercCfmMaintenanceDomainTable | not-accessible | current | Connectivity Fault Management Maintenance Domain table |
| 1.3.6.1.4.1.2272.1.69.1.1 | RowrcCfmMaintenanceDomainEntry | not-accessible | current | Connectivity Fault Management Maintenance Domain entry. |
| 1.3.6.1.4.1.2272.1.69.1.1.1 | ColumnrcCfmMaintenanceDomainIndex | not-accessible | current | Maintenance Domain index |
| 1.3.6.1.4.1.2272.1.69.1.1.2 | ColumnrcCfmMaintenanceDomainName | read-create | current | Maintenance Domain Name |
| 1.3.6.1.4.1.2272.1.69.1.1.3 | ColumnrcCfmMaintenanceDomainRowStatus | read-create | current | Used to create/delete entries |
| 1.3.6.1.4.1.2272.1.69.1.1.4 | ColumnrcCfmMaintenanceDomainNumOfMa | read-only | current | Used to indicate the number of MAs belong to this maintenance domain |
| 1.3.6.1.4.1.2272.1.69.1.1.5 | ColumnrcCfmMaintenanceDomainClearStats | read-create | current | To clear the MEPS CCM sending/receiving message counter un der this domain |
| 1.3.6.1.4.1.2272.1.69.1.1.6 | ColumnrcCfmMaintenanceDomainLevel | read-create | current | To set the maintenance level in this domain |
| 1.3.6.1.4.1.2272.1.69.1.1.7 | ColumnrcCfmMaintenanceDomainNumOfMip | read-only | current | Used to indicate the number of Mips belong to this maintenance domain |
| 1.3.6.1.4.1.2272.1.69.1.1.8 | ColumnrcCfmMaintenanceDomainType | read-only | current | To indicate the type of domain |
| 1.3.6.1.4.1.2272.1.69.1.1.9 | ColumnrcCfmMaintenanceDomainEventTrapEnable | read-create | current | Event Trap enable |
| 1.3.6.1.4.1.2272.1.69.1.1.10 | ColumnrcCfmMaintenanceDomainPmEnable | read-create | current | Performance monitor enable |
| 1.3.6.1.4.1.2272.1.69.1.1.11 | ColumnrcCfmMaintenanceDomainClearAisStats | read-write | current | To clear the AIS CCM sending/receiving message counter un der this domain |
| 1.3.6.1.4.1.2272.1.69.2 | TablercCfmMaintenanceAssociationTable | not-accessible | current | Connectivity Fault Management Maintenance Association table |
| 1.3.6.1.4.1.2272.1.69.2.1 | RowrcCfmMaintenanceAssociationEntry | not-accessible | current | Connectivity Fault Management Maintenance Association entry. |
| 1.3.6.1.4.1.2272.1.69.2.1.1 | ColumnrcCfmMaintenanceAssociationDomainIndex | not-accessible | current | Maintenance Association Domain Index |
| 1.3.6.1.4.1.2272.1.69.2.1.2 | ColumnrcCfmMaintenanceAssociationAssociationIndex | not-accessible | current | Maintenance Association Index |
| 1.3.6.1.4.1.2272.1.69.2.1.3 | ColumnrcCfmMaintenanceAssociationDomainName | read-only | current | Maintenance Association Domain Name |
| 1.3.6.1.4.1.2272.1.69.2.1.4 | ColumnrcCfmMaintenanceAssociationAssociationName | read-create | current | Maintenance Association Name |
| 1.3.6.1.4.1.2272.1.69.2.1.5 | ColumnrcCfmMaintenanceAssociationAdminState | read-create | current | Administratively enable or disable a maintenance association. |
| 1.3.6.1.4.1.2272.1.69.2.1.6 | ColumnrcCfmMaintenanceAssociationRowStatus | read-create | current | Used to create/delete entries |
| 1.3.6.1.4.1.2272.1.69.2.1.7 | ColumnrcCfmMaintenanceAssociationCcmInterval | read-create | current | Interval of periodic Continuity Check Message to be transmitted |
| 1.3.6.1.4.1.2272.1.69.2.1.8 | ColumnrcCfmMaintenanceAssociationCcmLifetime | read-create | current | Lifetime of periodic Continuity Check Message |
| 1.3.6.1.4.1.2272.1.69.2.1.9 | ColumnrcCfmMaintenanceAssociationCcmPriority | read-create | current | Priority of Continuity Check Message to be transmitted |
| 1.3.6.1.4.1.2272.1.69.2.1.10 | ColumnrcCfmMaintenanceAssociationCcmTxEnable | read-create | current | Continuity Check Message transmit enable |
| 1.3.6.1.4.1.2272.1.69.2.1.11 | ColumnrcCfmMaintenanceAssociationCcmRxEnable | read-create | current | Continuity Check Message receive enable |
| 1.3.6.1.4.1.2272.1.69.2.1.12 | ColumnrcCfmMaintenanceAssociationNumOfMep | read-only | current | Used to indicate the number of MEPs belong to this maintenance association |
| 1.3.6.1.4.1.2272.1.69.2.1.13 | ColumnrcCfmMaintenanceAssociationClearStats | read-create | current | To clear the MEPs CCM sending/receiving message counter under this MA |
| 1.3.6.1.4.1.2272.1.69.2.1.14 | ColumnrcCfmMaintenanceAssociationAutoDetect | read-create | current | Indicates whether MA allows auto-detect of remote MEPs |
| 1.3.6.1.4.1.2272.1.69.2.1.15 | ColumnrcCfmMaintenanceAssociationNumOfRemoteMep | read-only | current | Used to indicate the number of remote MEPs belong to this maintenance association |
| 1.3.6.1.4.1.2272.1.69.2.1.16 | ColumnrcCfmMaintenanceAssociationRemoveAutoRmep | read-create | current | Remove auto learned Remote Maintenance Endpoint ID, or 0 for unspecified |
| 1.3.6.1.4.1.2272.1.69.2.1.17 | ColumnrcCfmMaintenanceAssociationCcmRdiEnable | read-create | current | Continuity Check Message RDI enable |
| 1.3.6.1.4.1.2272.1.69.2.1.18 | ColumnrcCfmMaintenanceAssociationCcmMulticast | read-create | current | Indicates whether MA sends Multicast or Unicast CCMs |
| 1.3.6.1.4.1.2272.1.69.2.1.19 | ColumnrcCfmMaintenanceAssociationEventTrapEnable | read-create | current | Event Trap enable This MA level setting overrides MD level setting. |
| 1.3.6.1.4.1.2272.1.69.2.1.20 | ColumnrcCfmMaintenanceAssociationPmEnable | read-create | current | Performance monitor enable This MA level setting overrides MD level setting. |
| 1.3.6.1.4.1.2272.1.69.2.1.21 | ColumnrcCfmMaintenanceAssociationClearAisStats | read-write | current | To clear the Ais CCM sending/receiving message counter under this MA |
| 1.3.6.1.4.1.2272.1.69.3 | TablercCfmMaintenanceEndPointTable | not-accessible | current | Connectivity Fault Management Maintenance Association table |
| 1.3.6.1.4.1.2272.1.69.3.1 | RowrcCfmMaintenanceEndPointEntry | not-accessible | current | Connectivity Fault Management Maintenance EndPoint entry. |
| 1.3.6.1.4.1.2272.1.69.3.1.1 | ColumnrcCfmMaintenanceEndPointDomainIndex | not-accessible | current | Maintenance Domain Name |
| 1.3.6.1.4.1.2272.1.69.3.1.2 | ColumnrcCfmMaintenanceEndPointAssociationIndex | not-accessible | current | Maintenance Association Name |
| 1.3.6.1.4.1.2272.1.69.3.1.3 | ColumnrcCfmMaintenanceEndPointId | not-accessible | current | Maintenance EndPoint ID |
| 1.3.6.1.4.1.2272.1.69.3.1.4 | ColumnrcCfmMaintenanceEndPointDomainName | read-only | current | Maintenance Domain Name |
| 1.3.6.1.4.1.2272.1.69.3.1.5 | ColumnrcCfmMaintenanceEndPointAssociationName | read-only | current | Maintenance Association Name |
| 1.3.6.1.4.1.2272.1.69.3.1.6 | ColumnrcCfmMaintenanceEndPointAdminState | read-create | current | Administratively enable or disable a maintenance EndPoint. |
| 1.3.6.1.4.1.2272.1.69.3.1.7 | ColumnrcCfmMaintenanceEndPointRowStatus | read-create | current | Used to create/delete entries |
| 1.3.6.1.4.1.2272.1.69.3.1.8 | ColumnrcCfmMaintenanceEndPointCcmPriority | read-create | current | Priority of Continuity Check Message to be transmitted |
| 1.3.6.1.4.1.2272.1.69.3.1.9 | ColumnrcCfmMaintenanceEndPointCcmTxEnable | read-create | current | Continuity Check Message transmit enable |
| 1.3.6.1.4.1.2272.1.69.3.1.10 | ColumnrcCfmMaintenanceEndPointCcmRxEnable | read-create | current | Continuity Check Message receive enable |
| 1.3.6.1.4.1.2272.1.69.3.1.11 | ColumnrcCfmMaintenanceEndPointMepType | read-only | current | Mep Type |
| 1.3.6.1.4.1.2272.1.69.3.1.12 | ColumnrcCfmMaintenanceEndPointClearStats | read-create | current | To clear the MEP CCM sending/receiving message counter |
| 1.3.6.1.4.1.2272.1.69.3.1.13 | ColumnrcCfmMaintenanceEndPointServiceDescription | read-only | current | Used to specify what service this mep assigned to |
| 1.3.6.1.4.1.2272.1.69.3.1.14 | ColumnrcCfmMaintenanceEndPointRemoveAutoRmep | read-create | current | Remove auto learned Remote Maintenance Endpoint ID, or 0 for unspecified |
| 1.3.6.1.4.1.2272.1.69.3.1.15 | ColumnrcCfmMaintenanceEndPointMepStatus | read-only | current | Indicating if the mep status is active or inactive. Only Dual-Home Ring endpoint client meps can have active/inactive status. All other mep types have active s… |
| 1.3.6.1.4.1.2272.1.69.3.1.16 | ColumnrcCfmMaintenanceEndPointAisTxEnable | read-create | current | Alarm Indication Signal Message transmit enable |
| 1.3.6.1.4.1.2272.1.69.3.1.17 | ColumnrcCfmMaintenanceEndPointAisInterval | read-create | current | Interval of periodic Alarm Indication Signal Message to be transmitted. Unit in milliseconds. |
| 1.3.6.1.4.1.2272.1.69.3.1.18 | ColumnrcCfmMaintenanceEndPointIfTlv | read-create | current | Admin control of the Interface-Status-Tlv in maintenanceEndpoint. |
| 1.3.6.1.4.1.2272.1.69.3.1.19 | ColumnrcCfmMaintenanceEndPointMepDirection | read-only | current | Indicates the direction in which the Maintenance association faces on the bridge port. |
| 1.3.6.1.4.1.2272.1.69.3.1.20 | ColumnrcCfmMaintenanceEndPointClearAisStats | read-create | current | To clear the AIS sending/receiving message counter |
| 1.3.6.1.4.1.2272.1.69.3.1.21 | ColumnrcCfmMaintenanceEndPointIfIndex | read-create | current | This object is the interface index of the interface either a bridge port, or an aggregated IEEE 802.1 link within a bridge port, to which the MEP is attached. |
| 1.3.6.1.4.1.2272.1.69.3.1.22 | ColumnrcCfmMaintenanceEndPointCcmVlanId | read-create | current | Customer CCM VLAN ID |
| 1.3.6.1.4.1.2272.1.69.3.1.23 | ColumnrcCfmMaintenanceEndPointLabel | read-create | current | User provided field. Used to give extra management information/data. |
| 1.3.6.1.4.1.2272.1.69.4 | TablercCfmTrunkGroupTable | not-accessible | current | Connectivity Fault TrunkGroup table |
| 1.3.6.1.4.1.2272.1.69.4.1 | RowrcCfmTrunkGroupEntry | not-accessible | current | Connectivity Fault Management TrunkGroup entry. |
| 1.3.6.1.4.1.2272.1.69.4.1.1 | ColumnrcCfmTrunkGroupName | not-accessible | current | Trunk Group Name |
| 1.3.6.1.4.1.2272.1.69.4.1.2 | ColumnrcCfmTrunkGroupRowStatus | read-create | current | Used to create/delete entries |
| 1.3.6.1.4.1.2272.1.69.4.1.3 | ColumnrcCfmTrunkGroupPrimaryTrunk | read-create | current | Trunk Group PBT Primary Trunk Name |
| 1.3.6.1.4.1.2272.1.69.4.1.4 | ColumnrcCfmTrunkGroupSecondaryTrunk | read-create | current | Trunk Group PBT Secondary Trunk Name |
| 1.3.6.1.4.1.2272.1.69.4.1.5 | ColumnrcCfmTrunkGroupActiveTrunk | read-create | current | Trunk Group PBT Active Trunk Name |
| 1.3.6.1.4.1.2272.1.69.4.1.6 | ColumnrcCfmTrunkGroupRevertive | read-create | current | Revertive enable or disable |
| 1.3.6.1.4.1.2272.1.69.4.1.7 | ColumnrcCfmTrunkGroupLoopBackVlanId | read-create | current | Loopback VLAN ID for local pbt switching |
| 1.3.6.1.4.1.2272.1.69.4.1.8 | ColumnrcCfmTrunkGroupUserLabel1 | read-write | current | User provided field. Used to give extra management information/data |
| 1.3.6.1.4.1.2272.1.69.4.1.9 | ColumnrcCfmTrunkGroupUserLabel2 | read-write | current | User provided additional field. Used to give extra management information/data |
| 1.3.6.1.4.1.2272.1.69.5 | TablercCfmTrunkTable | not-accessible | current | Connectivity Fault Trunk table |
| 1.3.6.1.4.1.2272.1.69.5.1 | RowrcCfmTrunkEntry | not-accessible | current | Connectivity Fault Management Trunk entry. |
| 1.3.6.1.4.1.2272.1.69.5.1.1 | ColumnrcCfmTrunkName | not-accessible | current | PBT Trunk Name |
| 1.3.6.1.4.1.2272.1.69.5.1.2 | ColumnrcCfmTrunkPort | read-create | current | PBT Trunk Port |
| 1.3.6.1.4.1.2272.1.69.5.1.3 | ColumnrcCfmTrunkAdminState | read-create | current | Administratively enable or disable a PBT trunk. |
| 1.3.6.1.4.1.2272.1.69.5.1.4 | ColumnrcCfmTrunkRowStatus | read-create | current | Used to create/delete entries |
| 1.3.6.1.4.1.2272.1.69.5.1.5 | ColumnrcCfmTrunkMac | read-create | current | Trunk Mac (remote CP mac) |
| 1.3.6.1.4.1.2272.1.69.5.1.6 | ColumnrcCfmTrunkMdName | read-create | current | PBT Trunk Maintenance Domain Name |
| 1.3.6.1.4.1.2272.1.69.5.1.7 | ColumnrcCfmTrunkMaName | read-create | current | PBT Trunk Maintenance Association Name |
| 1.3.6.1.4.1.2272.1.69.5.1.8 | ColumnrcCfmTrunkVlanId | read-create | current | PBT trunk VLAN ID |
| 1.3.6.1.4.1.2272.1.69.5.1.9 | ColumnrcCfmTrunkReverseVlanId | read-create | current | PBT trunk reverse VLAN ID |
| 1.3.6.1.4.1.2272.1.69.5.1.10 | ColumnrcCfmTrunkMepId | read-create | current | PBT trunk MEP ID. Range 1-8191 is a valid Mep ID to be assigned to the CFM Trunk. '0' means unassign the Med ID from the CFM Trunk |
| 1.3.6.1.4.1.2272.1.69.5.1.11 | ColumnrcCfmTrunkHoldTimer | read-create | current | Trunk hold timer value. |
| 1.3.6.1.4.1.2272.1.69.5.1.12 | ColumnrcCfmTrunkOperStatus | read-only | current | The current operational status of this trunk. |
| 1.3.6.1.4.1.2272.1.69.5.1.13 | ColumnrcCfmTrunkSourceMac | read-create | current | Trunk Source Mac (local switch PBT mac) |
| 1.3.6.1.4.1.2272.1.69.5.1.14 | ColumnrcCfmTrunkClearStats | read-create | current | Action to clear the stats for all trunks |
| 1.3.6.1.4.1.2272.1.69.5.1.15 | ColumnrcCfmTrunkUserLabel1 | read-write | current | User provided field. Used to give extra management information/data |
| 1.3.6.1.4.1.2272.1.69.5.1.16 | ColumnrcCfmTrunkUserLabel2 | read-write | current | User provided additional field. Used to give extra management information/data |
| 1.3.6.1.4.1.2272.1.69.5.1.17 | ColumnrcCfmTrunkSubportQueueSet | read-create | current | Subport Queue Set Index Number |
| 1.3.6.1.4.1.2272.1.69.5.1.18 | ColumnrcCfmTrunkDualHomePartner | read-create | current | Enable PBT trunk as Dual Home Partner |
| 1.3.6.1.4.1.2272.1.69.6 | TablercCfmServiceGroupTable | not-accessible | current | Connectivity Fault Service Group table |
| 1.3.6.1.4.1.2272.1.69.6.1 | RowrcCfmServiceGroupEntry | not-accessible | current | Connectivity Fault Management ServiceGroup entry. |
| 1.3.6.1.4.1.2272.1.69.6.1.1 | ColumnrcCfmServiceGroupName | not-accessible | current | PBT ServiceGroup Name |
| 1.3.6.1.4.1.2272.1.69.6.1.2 | ColumnrcCfmServiceGroupPort | read-create | current | PBT ServiceGroup Port |
| 1.3.6.1.4.1.2272.1.69.6.1.3 | ColumnrcCfmServiceGroupAdminState | read-create | current | Administratively enable or disable a PBT Service Group. |
| 1.3.6.1.4.1.2272.1.69.6.1.4 | ColumnrcCfmServiceGroupRowStatus | read-create | current | Used to create/delete entries |
| 1.3.6.1.4.1.2272.1.69.6.1.5 | ColumnrcCfmServiceGroupMac | read-create | current | ServiceGroup Mac (remote mac of NPU) |
| 1.3.6.1.4.1.2272.1.69.6.1.6 | ColumnrcCfmServiceGroupMdName | read-create | current | PBT ServiceGroup Maintenance Domain Name |
| 1.3.6.1.4.1.2272.1.69.6.1.7 | ColumnrcCfmServiceGroupMaName | read-create | current | PBT ServiceGroup Maintenance Association Name |
| 1.3.6.1.4.1.2272.1.69.6.1.8 | ColumnrcCfmServiceGroupTgName | read-create | current | PBT ServiceGroup Trunk Group Name |
| 1.3.6.1.4.1.2272.1.69.6.1.9 | ColumnrcCfmServiceGroupMepId | read-create | current | PBT ServiceGroup MEP ID. Range 1-8191 is a valid Mep ID to be assigned to the CFM Service group. '0' means unassign the Med ID from the CFM service group |
| 1.3.6.1.4.1.2272.1.69.6.1.10 | ColumnrcCfmServiceGroupRingId | read-create | current | Ring ID associated with Service Group |
| 1.3.6.1.4.1.2272.1.69.6.1.11 | ColumnrcCfmServiceGroupCcmOperStatus | read-only | current | The current CCM operational status of this service group. |
| 1.3.6.1.4.1.2272.1.69.7 | NodercCfmPbt | |||
| 1.3.6.1.4.1.2272.1.69.7.1 | ScalarrcCfmPbtVlans | read-write | current | Connectivity Fault Management PBT vlan entry. |
| 1.3.6.1.4.1.2272.1.69.7.2 | ScalarrcCfmPbtMsti | read-write | current | MSTI instance ID for PBT VLANS |
| 1.3.6.1.4.1.2272.1.69.8 | TablercCfmStatsTable | not-accessible | current | CFM stats table |
| 1.3.6.1.4.1.2272.1.69.8.1 | RowrcCfmStatsEntry | not-accessible | current | CFM Stats table entry. Contain CFM Message sending/receiving and missing counter |
| 1.3.6.1.4.1.2272.1.69.8.1.1 | ColumnrcCfmStatsDomainIndex | not-accessible | current | Maintenance Domain Name |
| 1.3.6.1.4.1.2272.1.69.8.1.2 | ColumnrcCfmStatsAssociationIndex | not-accessible | current | Maintenance Association Name |
| 1.3.6.1.4.1.2272.1.69.8.1.3 | ColumnrcCfmStatsDomainName | read-only | current | Maintenance Domain Name |
| 1.3.6.1.4.1.2272.1.69.8.1.4 | ColumnrcCfmStatsAssociationName | read-only | current | Maintenance Association Name |
| 1.3.6.1.4.1.2272.1.69.8.1.5 | ColumnrcCfmStatsMepId | not-accessible | current | Maintenance EndPoint ID |
| 1.3.6.1.4.1.2272.1.69.8.1.6 | ColumnrcCfmStatsTxCnt | read-only | current | The total Number of CFM messages are transmitted by trunk or ESM port |
| 1.3.6.1.4.1.2272.1.69.8.1.7 | ColumnrcCfmStatsRxCnt | read-only | current | The total Number of CFM messages are received by trunk or ESM port |
| 1.3.6.1.4.1.2272.1.69.8.1.8 | ColumnrcCfmStatsRxZeroCnt | read-only | current | The total Number of CFM messages are received by trunk or ESM port |
| 1.3.6.1.4.1.2272.1.69.8.1.9 | ColumnrcCfmStatsMissedCnt | read-only | current | The total Number of CFM messages are missing on trunk or ESM port |
| 1.3.6.1.4.1.2272.1.69.8.1.10 | ColumnrcCfmStatsUpTimeCnt | read-only | current | The total Time of CFM messages are UP on trunk or ESM port in milliseconds |
| 1.3.6.1.4.1.2272.1.69.8.1.11 | ColumnrcCfmStatsDefect | read-only | current | An enumerated value indicating the highest-priority defect that has been present since the MEP Fault Notification Generate State Machine was last in the FNG_RE… |
| 1.3.6.1.4.1.2272.1.69.8.1.12 | ColumnrcCfmStatsAisTxCnt | read-only | current | The total Number of AIS messages transmitted by Client Mep on Port/MLT |
| 1.3.6.1.4.1.2272.1.69.8.1.13 | ColumnrcCfmStatsAisRxCnt | read-only | current | The total Number of AIS messages received by Client Mep on Port/MLT |
| 1.3.6.1.4.1.2272.1.69.8.1.14 | ColumnrcCfmStatsAisOperState | read-only | current | To indicate the operational status of AIS. It is set to true when AIS is transmitted. It is set to false when AIS is cleared. |
| 1.3.6.1.4.1.2272.1.69.8.1.15 | ColumnrcCfmStatsAisMipLevel | read-only | current | This is Maintenance Domain Level of the MIP on which the AIS is transmitted. |
| 1.3.6.1.4.1.2272.1.69.8.1.16 | ColumnrcCfmStatsIfTlvTx | read-only | current | To indicate the operational state of Interface Status TLV transmitted on MaintenanceEndpoint. This status indicates that the state of the local UNI Port. |
| 1.3.6.1.4.1.2272.1.69.8.1.17 | ColumnrcCfmStatsAccessDrops | read-only | current | The total number of packets dropped on ingress to access port, for this MEP, due to same or lower MD level |
| 1.3.6.1.4.1.2272.1.69.8.1.18 | ColumnrcCfmStatsAggregateUplinkDrops | read-only | current | The total number of packets dropped on ingress to uplink port, for all MEPS, due to lower MD level |
| 1.3.6.1.4.1.2272.1.69.9 | NodercCfmTrap | |||
| 1.3.6.1.4.1.2272.1.69.9.1 | ScalarrcCfmTrunkCcmIndication | read-only | current | A Trunk CCM indication signifies that the trunk CCM operational status has changed state to UP or DOWN |
| 1.3.6.1.4.1.2272.1.69.9.2 | ScalarrcCfmServiceGroupCcmIndication | read-only | current | A Service Group CCM indication signifies that the service group CCM operational status has changed state to UP or DOWN |
| 1.3.6.1.4.1.2272.1.69.9.3 | ScalarrcCfmEndPointCcmIndication | read-only | current | A Endpoint CCM indication signifies that the endpoint CCM operational status has changed state to UP or DOWN |
| 1.3.6.1.4.1.2272.1.69.9.4 | ScalarrcCfmTrunkGroupIndication | read-only | current | A Trunk group CCM indication signifies what kind of protection failure within the trunk group |
| 1.3.6.1.4.1.2272.1.69.9.5 | ScalarrcCfmTrunkGroupProtected | read-only | current | signifies trunk group was protected or was not protected |
| 1.3.6.1.4.1.2272.1.69.9.6 | ScalarrcCfmRemoteMepId | read-only | current | Remote Maintenance Endpoint ID |
| 1.3.6.1.4.1.2272.1.69.9.7 | ScalarrcCfmLocalMepId | read-only | current | Local Maintenance Endpoint ID |
| 1.3.6.1.4.1.2272.1.69.9.8 | ScalarrcCfmMepCcmIndication | read-only | current | CCM indication signifies that the MEP CCM operational status |
| 1.3.6.1.4.1.2272.1.69.9.9 | ScalarrcCfmCvid | read-only | current | A value that uniquely identifies the Customer Vlan Id in i-sid endpt. |
| 1.3.6.1.4.1.2272.1.69.9.10 | ScalarrcCfmRemoteMacAddr | read-only | current | remote MAC address |
| 1.3.6.1.4.1.2272.1.69.9.11 | ScalarrcCfmIsidId | read-only | current | Service Instance ID of the I component |
| 1.3.6.1.4.1.2272.1.69.9.12 | ScalarrcCfmTrapTrunkName | read-only | current | PBT Trunk Name |
| 1.3.6.1.4.1.2272.1.69.9.13 | ScalarrcCfmPbitNum | read-only | current | p-bit value used to queue packets |
| 1.3.6.1.4.1.2272.1.69.9.14 | ScalarrcCfmUserLabel1 | read-only | current | Memo field <Data OSS port ID> |
| 1.3.6.1.4.1.2272.1.69.9.15 | ScalarrcCfmUserLabel2 | read-only | current | Memo field <Sonet OSS circuit ID> |
| 1.3.6.1.4.1.2272.1.69.9.16 | ScalarrcCfmMonitorCosPriority | read-only | current | Monitor customer traffic on COS priority |
| 1.3.6.1.4.1.2272.1.69.9.17 | ScalarrcCfmThresholdIndication | read-only | current | A threshold indication is: alarm - when the set-threshold has been exceeded clear - when the clear-threshold level has been reached after an alarm condition |
| 1.3.6.1.4.1.2272.1.69.9.18 | ScalarrcCfmActualPercentage | read-only | current | Measured Percentage in 1 percent increments |
| 1.3.6.1.4.1.2272.1.69.9.19 | ScalarrcCfmActualSubPercentage | read-only | current | Measured Sub percentage in 1/100 percent increments |
| 1.3.6.1.4.1.2272.1.69.9.20 | ScalarrcCfmAlarmThreshold | read-only | current | Configured alarm percentage threshold |
| 1.3.6.1.4.1.2272.1.69.9.21 | ScalarrcCfmAlarmSubThreshold | read-only | current | Configured alarm sub percentage threshold |
| 1.3.6.1.4.1.2272.1.69.9.22 | ScalarrcCfmClearThreshold | read-only | current | Configured clear percentage threshold |
| 1.3.6.1.4.1.2272.1.69.9.23 | ScalarrcCfmClearSubThreshold | read-only | current | Configured clear sub percentage threshold |
| 1.3.6.1.4.1.2272.1.69.9.24 | ScalarrcCfmFdTarget | read-only | current | frame delay target |
| 1.3.6.1.4.1.2272.1.69.9.25 | ScalarrcCfmFdAverage | read-only | current | frame delay average |
| 1.3.6.1.4.1.2272.1.69.9.26 | ScalarrcCfmTime | read-only | current | The date and time stamp. |
| 1.3.6.1.4.1.2272.1.69.9.27 | ScalarrcCfmTrapTrunkGroupName | read-only | current | trunk group name. |
| 1.3.6.1.4.1.2272.1.69.9.28 | ScalarrcCfmVid | read-only | current | A value that uniquely identifies the Customer Vlan Id in i-sid endpt. |
| 1.3.6.1.4.1.2272.1.69.9.29 | ScalarrcCfmFdvTarget | read-only | current | frame delay variation target |
| 1.3.6.1.4.1.2272.1.69.9.30 | ScalarrcCfmFdvAverage | read-only | current | frame delay variation average |
| 1.3.6.1.4.1.2272.1.69.9.31 | ScalarrcCfmDirection | read-only | current | MEP direction |
| 1.3.6.1.4.1.2272.1.69.9.32 | ScalarrcCfmDhuId | read-only | current | A value that uniquely identifies the DH Uni Id in i-sid endpt. |
| 1.3.6.1.4.1.2272.1.69.9.33 | ScalarrcCfmIftlvIndication | read-only | current | A Iftlv indication signifies that the operational status of CCM that is sent or received with iftlv has changed state to UP or DOWN |
| 1.3.6.1.4.1.2272.1.69.10 | NodercCfmGlobals | |||
| 1.3.6.1.4.1.2272.1.69.10.1 | ScalarrcCfmGlobalsEtherType | read-write | deprecated | CFM Ether Type |
| 1.3.6.1.4.1.2272.1.69.10.2 | ScalarrcCfmGlobalsPbtMac | read-write | current | PBT base MAC address |
| 1.3.6.1.4.1.2272.1.69.10.3 | ScalarrcCfmGlobalsPortVid | read-write | current | CFM default port vid, 4095 is used for untagged. |
| 1.3.6.1.4.1.2272.1.69.10.4 | ScalarrcCfmGlobalsPbtDropTrapTimer | read-write | current | The timer settings for traps being sent on discard of packets with unknown destination MAC in minutes |
| 1.3.6.1.4.1.2272.1.69.10.5 | ScalarrcCfmGlobalsPmEnable | read-write | current | Performance monitor enable |
| 1.3.6.1.4.1.2272.1.69.10.6 | ScalarrcCfmGlobalsCcmTrapDisplayEnable | read-write | current | CCM trap display enable |
| 1.3.6.1.4.1.2272.1.69.10.7 | ScalarrcCfmGlobalsPmLogEnable | read-write | current | Enable PM Auto Logging |
| 1.3.6.1.4.1.2272.1.69.10.8 | ScalarrcCfmGlobalsSpbmAdminState | read-write | current | Enable/Disable global cfm support for SPBM VLANs |
| 1.3.6.1.4.1.2272.1.69.10.9 | ScalarrcCfmGlobalsSpbmLevel | read-write | current | Used to set the global cfm maintenance level for SPBM VLANs |
| 1.3.6.1.4.1.2272.1.69.10.10 | ScalarrcCfmGlobalsSpbmMepId | read-write | current | Set the global cfm Maintenance End Point ID value for SPBM VLANs |
| 1.3.6.1.4.1.2272.1.69.10.11 | ScalarrcCfmGlobalsCmacAdminState | read-write | current | Enable/Disable global cfm support for C-VLANs |
| 1.3.6.1.4.1.2272.1.69.10.12 | ScalarrcCfmGlobalsCmacLevel | read-write | current | Used to set the global cfm maintenance level for C-VLANs |
| 1.3.6.1.4.1.2272.1.69.10.13 | ScalarrcCfmGlobalsCmacMepId | read-write | current | Set the global cfm Maintenance End Point ID value for C-VLANs |
| 1.3.6.1.4.1.2272.1.69.10.14 | ScalarrcCfmGlobalsBmac | read-only | current | The Bmac address of the node |
| 1.3.6.1.4.1.2272.1.69.10.15 | ScalarrcCfmGlobalsCmac | read-only | current | The Cmac address of the node |
| 1.3.6.1.4.1.2272.1.69.11 | TablercCfmRemoteMepConfigTable | not-accessible | current | Connectivity Fault Management Remote Maintenance Association table |
| 1.3.6.1.4.1.2272.1.69.11.1 | RowrcCfmRemoteMepConfigEntry | not-accessible | current | Connectivity Fault Management Remote Maintenance EndPoint entry. |
| 1.3.6.1.4.1.2272.1.69.11.1.1 | ColumnrcCfmRemoteMepConfigDomainIndex | not-accessible | current | Remote Maintenance Domain Name |
| 1.3.6.1.4.1.2272.1.69.11.1.2 | ColumnrcCfmRemoteMepConfigAssociationIndex | not-accessible | current | Remote Maintenance Association Name |
| 1.3.6.1.4.1.2272.1.69.11.1.3 | ColumnrcCfmRemoteMepConfigId | not-accessible | current | Remote Maintenance EndPoint ID |
| 1.3.6.1.4.1.2272.1.69.11.1.4 | ColumnrcCfmRemoteMepConfigDomainName | read-only | current | Remote Maintenance Domain Name |
| 1.3.6.1.4.1.2272.1.69.11.1.5 | ColumnrcCfmRemoteMepConfigAssociationName | read-only | current | Remote Maintenance Association Name |
| 1.3.6.1.4.1.2272.1.69.11.1.6 | ColumnrcCfmRemoteMepConfigMacAddr | read-create | current | Mac address of remote maintenance endpoint |
| 1.3.6.1.4.1.2272.1.69.11.1.7 | ColumnrcCfmRemoteMepConfigRowStatus | read-create | current | Used to create/delete entries |
| 1.3.6.1.4.1.2272.1.69.12 | TablercCfmRemoteMepStatsTable | not-accessible | current | CFM Mep Learn stats table contains the local and remote mep Tx and Rx statistics |
| 1.3.6.1.4.1.2272.1.69.12.1 | RowrcCfmRemoteMepStatsEntry | not-accessible | current | CFM Stats table entry. Contain CFM Message sending/receiving and missing counter. Entry indicate the CCM message still alive |
| 1.3.6.1.4.1.2272.1.69.12.1.1 | ColumnrcCfmRemoteMepStatsDomainIndex | not-accessible | current | Maintenance Domain Name index |
| 1.3.6.1.4.1.2272.1.69.12.1.2 | ColumnrcCfmRemoteMepStatsAssociationIndex | not-accessible | current | Maintenance Association Name index |
| 1.3.6.1.4.1.2272.1.69.12.1.3 | ColumnrcCfmRemoteMepStatsMepId | not-accessible | current | Local MEP (Maintenance EndPoint) ID |
| 1.3.6.1.4.1.2272.1.69.12.1.4 | ColumnrcCfmRemoteMepStatsRemoteMepId | not-accessible | current | Remote Mep Id which the local mep rx CCM message from |
| 1.3.6.1.4.1.2272.1.69.12.1.5 | ColumnrcCfmRemoteMepStatsDomainName | read-only | current | Maintenance Domain Name |
| 1.3.6.1.4.1.2272.1.69.12.1.6 | ColumnrcCfmRemoteMepStatsAssociationName | read-only | current | Maintenance Association Name |
| 1.3.6.1.4.1.2272.1.69.12.1.7 | ColumnrcCfmRemoteMepStatsLearnType | read-only | current | Indicate the learning remote Mep is static created or dynamic learn |
| 1.3.6.1.4.1.2272.1.69.12.1.8 | ColumnrcCfmRemoteMepStatsRemoteMacAddr | read-only | current | A remote MAC address |
| 1.3.6.1.4.1.2272.1.69.12.1.9 | ColumnrcCfmRemoteMepStatsRxCnt | read-only | current | The total Number of CFM messages are received by trunk or ESM port |
| 1.3.6.1.4.1.2272.1.69.12.1.10 | ColumnrcCfmRemoteMepStatsSeqErrCnt | read-only | current | The total Number of Sequence errors |
| 1.3.6.1.4.1.2272.1.69.12.1.11 | ColumnrcCfmRemoteMepStatsOperState | read-only | current | To indicate the operational state of remote maintenance endpoint |
| 1.3.6.1.4.1.2272.1.69.12.1.12 | ColumnrcCfmRemoteMepStatsClearStats | read-write | current | To clear the CCM messages counter |
| 1.3.6.1.4.1.2272.1.69.12.1.13 | ColumnrcCfmRemoteMepStatsDbRdi | read-only | current | State of the RDI bit in the last received CCM (true for RDI=1), or false if none has been received. |
| 1.3.6.1.4.1.2272.1.69.12.1.14 | ColumnrcCfmRemoteMepStatsIfTlvRx | read-only | current | To indicate the operational state of Interface Status TLV received on MaintenanceEndpoint. This status indicates that the state of the remote UNI Port |
| 1.3.6.1.4.1.2272.1.69.13 | TablercCfmMaintenanceIntermediatePointTable | not-accessible | current | Connectivity Fault Management Maintenance Intermediate Point table |
| 1.3.6.1.4.1.2272.1.69.13.1 | RowrcCfmMaintenanceIntermediatePointEntry | not-accessible | current | Connectivity Fault Management Maintenance Intermediate Point entry. |
| 1.3.6.1.4.1.2272.1.69.13.1.1 | ColumnrcCfmMaintenanceIntermediatePointDomainIndex | not-accessible | current | Maintenance Domain Name |
| 1.3.6.1.4.1.2272.1.69.13.1.2 | ColumnrcCfmMaintenanceIntermediatePointId | not-accessible | current | Maintenance IntermediatePoint ID |
| 1.3.6.1.4.1.2272.1.69.13.1.3 | ColumnrcCfmMaintenanceIntermediatePointDomainName | read-only | current | Maintenance Domain Name |
| 1.3.6.1.4.1.2272.1.69.13.1.4 | ColumnrcCfmMaintenanceIntermediatePointRowStatus | read-create | current | Used to create/delete entries |
| 1.3.6.1.4.1.2272.1.69.13.1.5 | ColumnrcCfmMaintenanceIntermediatePointMipType | read-only | current | Mip Type |
| 1.3.6.1.4.1.2272.1.69.13.1.6 | ColumnrcCfmMaintenanceIntermediatePointClearStats | read-create | current | To clear the MIP CCM sending/receiving message counter |
| 1.3.6.1.4.1.2272.1.69.13.1.7 | ColumnrcCfmMaintenanceIntermediatePointServiceDescription | read-only | current | Used to specify what service this mip assigned to |
| 1.3.6.1.4.1.2272.1.69.14 | TablercCfmNniTable | not-accessible | current | CFM NNI table |
| 1.3.6.1.4.1.2272.1.69.14.1 | RowrcCfmNniEntry | not-accessible | current | CFM NNI table entry |
| 1.3.6.1.4.1.2272.1.69.14.1.1 | ColumnrcCfmNniPort | not-accessible | current | PBT Trunk Port |
| 1.3.6.1.4.1.2272.1.69.14.1.2 | ColumnrcCfmNniServiceId | not-accessible | current | TDI or MIM |
| 1.3.6.1.4.1.2272.1.69.14.1.3 | ColumnrcCfmNniPwIndex | not-accessible | current | PW index |
| 1.3.6.1.4.1.2272.1.69.14.1.4 | ColumnrcCfmNniTlsIndex | not-accessible | current | Access Port |
| 1.3.6.1.4.1.2272.1.69.14.1.5 | ColumnrcCfmNniTgName | read-only | current | PBT Trunk Group Name |
| 1.3.6.1.4.1.2272.1.69.15 | TablercCfmNniStatsTable | not-accessible | current | CFM NNI stats table |
| 1.3.6.1.4.1.2272.1.69.15.1 | RowrcCfmNniStatsEntry | not-accessible | current | CFM NNI Stats table entry. Contain bytes processed and dropped due to lookup failure in the SDT table |
| 1.3.6.1.4.1.2272.1.69.15.1.1 | ColumnrcCfmNniStatsPort | not-accessible | current | PBT Trunk Port |
| 1.3.6.1.4.1.2272.1.69.15.1.2 | ColumnrcCfmNniStatsOel2RxOctets | read-only | current | The total Number of bytes (OEL2 encapsulation) processed on ingress NNI port |
| 1.3.6.1.4.1.2272.1.69.15.1.3 | ColumnrcCfmNniStatsOel2RxDroppedOctets | read-only | current | The total Number of bytes (OEL2 encapsulation) dropped on ingress NNI port |
| 1.3.6.1.4.1.2272.1.69.15.1.4 | ColumnrcCfmNniStatsMimRxOctets | read-only | current | The total Number of bytes (MIM encapsulation) processed on ingress NNI port |
| 1.3.6.1.4.1.2272.1.69.15.1.5 | ColumnrcCfmNniStatsMimRxDroppedOctets | read-only | current | The total Number of bytes (MIM encapsulation) dropped on ingress NNI port |
| 1.3.6.1.4.1.2272.1.69.15.1.6 | ColumnrcCfmNniStatsPweRxOctets | read-only | current | The total Number of bytes (PWE encapsulation) processed on ingress NNI port |
| 1.3.6.1.4.1.2272.1.69.15.1.7 | ColumnrcCfmNniStatsPweRxDroppedOctets | read-only | current | The total Number of bytes (PWE encapsulation) dropped on ingress NNI port |
| 1.3.6.1.4.1.2272.1.69.16 | TablercCfmMipStatsTable | not-accessible | current | CFM Mip stats table |
| 1.3.6.1.4.1.2272.1.69.16.1 | RowrcCfmMipStatsEntry | not-accessible | current | CFM Mip Stats table entry. Contain CFM Mip message number of receiving/replying loopback & linktrace. |
| 1.3.6.1.4.1.2272.1.69.16.1.1 | ColumnrcCfmMipStatsDomainIndex | not-accessible | current | Maintenance Domain Name |
| 1.3.6.1.4.1.2272.1.69.16.1.2 | ColumnrcCfmMipStatsDomainName | read-only | current | Maintenance Domain Name |
| 1.3.6.1.4.1.2272.1.69.16.1.3 | ColumnrcCfmMipStatsMipId | not-accessible | current | Maintenance Intermediate Point ID |
| 1.3.6.1.4.1.2272.1.69.16.1.4 | ColumnrcCfmMipStatsLoopbackReceived | read-only | current | The total Number of CFM loopback messages received. |
| 1.3.6.1.4.1.2272.1.69.16.1.5 | ColumnrcCfmMipStatsLoopbackReplied | read-only | current | The total Number of CFM loopback messages replied. |
| 1.3.6.1.4.1.2272.1.69.16.1.6 | ColumnrcCfmMipStatsLinktraceReceived | read-only | current | The total Number of CFM linktrace messages received. |
| 1.3.6.1.4.1.2272.1.69.16.1.7 | ColumnrcCfmMipStatsLinktraceReplied | read-only | current | The total Number of CFM linktrace messages replied. |
| 1.3.6.1.4.1.2272.1.69.17 | TablercCfmTransmitLbmTable | not-accessible | current | Connectivity Fault Management transmit LBM table |
| 1.3.6.1.4.1.2272.1.69.17.1 | RowrcCfmTransmitLbmEntry | not-accessible | current | Connectivity Fault Management Maintenance EndPoint LBM entry. |
| 1.3.6.1.4.1.2272.1.69.17.1.1 | ColumnrcCfmTransmitLbmDomainIndex | not-accessible | current | Maintenance Domain Name |
| 1.3.6.1.4.1.2272.1.69.17.1.2 | ColumnrcCfmTransmitLbmAssociationIndex | not-accessible | current | Maintenance Association Name |
| 1.3.6.1.4.1.2272.1.69.17.1.3 | ColumnrcCfmTransmitLbmIndex | not-accessible | current | Maintenance EndPoint Index |
| 1.3.6.1.4.1.2272.1.69.17.1.4 | ColumnrcCfmTransmitLbmDomainName | read-only | current | Maintenance Domain Name |
| 1.3.6.1.4.1.2272.1.69.17.1.5 | ColumnrcCfmTransmitLbmAssociationName | read-only | current | Maintenance Association Name |
| 1.3.6.1.4.1.2272.1.69.17.1.6 | ColumnrcCfmTransmitLbmDestMacAddress | read-write | current | An indication of the target MAC Address Field to be transmitted, either: A unicast destination MAC address. |
| 1.3.6.1.4.1.2272.1.69.17.1.7 | ColumnrcCfmTransmitLbmDestMepId | read-write | current | An indication of the target MAC Address Field to be transmitted, either: The Maintenance Assiciation End Point identifier of another MEP in the same Maintenanc… |
| 1.3.6.1.4.1.2272.1.69.17.1.8 | ColumnrcCfmTransmitLbmDestIsMepId | read-write | current | True indicates that MepId of the target MEP is used for Loopback transmission. False indicates that unicast destination MAC address of the target MEP is used f… |
| 1.3.6.1.4.1.2272.1.69.17.1.9 | ColumnrcCfmTransmitLbmMessages | read-write | current | The number of loopback messages to be transmitted. |
| 1.3.6.1.4.1.2272.1.69.17.1.11 | ColumnrcCfmTransmitLbmVlanPriority | read-write | current | Priority. 3 bit value to be used in the VLAN tsg, if present in the transmitted frame. |
| 1.3.6.1.4.1.2272.1.69.17.1.12 | ColumnrcCfmTransmitLbmVlanDropEnable | read-write | current | Drop Enable bit value to be used in the VLAN tag, if present in the transmitted frame. |
| 1.3.6.1.4.1.2272.1.69.17.1.13 | ColumnrcCfmTransmitLbmSeqNumber | read-only | current | The transaction identifier/sequence number of the first loopback message (to be) sent. |
| 1.3.6.1.4.1.2272.1.69.17.1.14 | ColumnrcCfmTransmitLbmResultOk | read-only | current | Indicates the result of the operation: -true. The Loopback Message(s) will be (or have been) sent. -false. The Loopback Message(s) will not be sent. |
| 1.3.6.1.4.1.2272.1.69.17.1.15 | ColumnrcCfmTransmitLbmStatus | read-write | current | Status of the transmit loopback service: -ready. The service is available. -transmit. The service is transmitting, or about to transmit, the Loopback messages.… |
| 1.3.6.1.4.1.2272.1.69.17.1.16 | ColumnrcCfmTransmitLbmResult | read-only | current | Display the LBM result. |
| 1.3.6.1.4.1.2272.1.69.17.1.17 | ColumnrcCfmTransmitLbmMode | read-write | current | Modes of the transmit loopback service: throughput: The throughput mode of operation. LBM Frame will be sent out at the configured transmit interval rate for t… |
| 1.3.6.1.4.1.2272.1.69.17.1.18 | ColumnrcCfmTransmitLbmTimeoutInt | read-write | current | The interval to wait for an LBM time-out with a range of (1..10) seconds with a default value of 3 seconds. |
| 1.3.6.1.4.1.2272.1.69.17.1.19 | ColumnrcCfmTransmitLbmInterFrameInt | read-write | current | The interval between LBM frames with a range of (0..1000) msecs with a default value of 500 msecs. The value of 0 msecs indicates to send the frames as fast as… |
| 1.3.6.1.4.1.2272.1.69.17.1.20 | ColumnrcCfmTransmitLbmTestPattern | read-write | current | The test pattern to use in the LBM PDU with range of values namely allZero, allZeroCrc, pseudoRandomBitSequence and pseudoRandomBitSequenceCrc and with a defau… |
| 1.3.6.1.4.1.2272.1.69.17.1.21 | ColumnrcCfmTransmitLbmDataSize | read-write | current | An arbitrary amount of data to be included in the data TLV, if the Data Size is selected to be sent. |
| 1.3.6.1.4.1.2272.1.69.17.1.22 | ColumnrcCfmTransmitLbmFrameSize | read-write | current | If the frame size is specified then the data size shall be internally calculated and the calculated data size shall be included in the data TLV. |
| 1.3.6.1.4.1.2272.1.69.17.1.23 | ColumnrcCfmTransmitLbmSourceMode | read-write | current | Source modes of the transmit loopback service. |
| 1.3.6.1.4.1.2272.1.69.18 | TablercCfmTransmitLtmTable | not-accessible | current | Connectivity Fault Management transmit LTM table |
| 1.3.6.1.4.1.2272.1.69.18.1 | RowrcCfmTransmitLtmEntry | not-accessible | current | Connectivity Fault Management Maintenance EndPoint LTM entry. |
| 1.3.6.1.4.1.2272.1.69.18.1.1 | ColumnrcCfmTransmitLtmDomainIndex | not-accessible | current | Maintenance Domain Name |
| 1.3.6.1.4.1.2272.1.69.18.1.2 | ColumnrcCfmTransmitLtmAssociationIndex | not-accessible | current | Maintenance Association Name |
| 1.3.6.1.4.1.2272.1.69.18.1.3 | ColumnrcCfmTransmitLtmIndex | not-accessible | current | Maintenance EndPoint Index |
| 1.3.6.1.4.1.2272.1.69.18.1.4 | ColumnrcCfmTransmitLtmDomainName | read-only | current | Maintenance Domain Name |
| 1.3.6.1.4.1.2272.1.69.18.1.5 | ColumnrcCfmTransmitLtmAssociationName | read-only | current | Maintenance Association Name |
| 1.3.6.1.4.1.2272.1.69.18.1.6 | ColumnrcCfmTransmitLtmVlanPriority | read-write | current | Priority. 3 bit value to be used in the VLAN tag, if present in the transmitted frame. |
| 1.3.6.1.4.1.2272.1.69.18.1.7 | ColumnrcCfmTransmitLtmDestMacAddress | read-write | current | An indication of the target MAC Address Field to be transmitted, either: A unicast destination MAC address. |
| 1.3.6.1.4.1.2272.1.69.18.1.8 | ColumnrcCfmTransmitLtmDestMepId | read-write | current | An indication of the target MAC Address Field to be transmitted, either: The Maintenance Assiciation End Point identifier of another MEP in the same Maintenanc… |
| 1.3.6.1.4.1.2272.1.69.18.1.9 | ColumnrcCfmTransmitLtmDestIsMepId | read-write | current | True indicates that MepId of the target MEP is used for Loopback transmission. False indicates that unicast destination MAC address of the target MEP is used f… |
| 1.3.6.1.4.1.2272.1.69.18.1.10 | ColumnrcCfmTransmitLtmTtl | read-write | current | The number of hops remaining to this LTM. Decremented by 1 by each Bridge that handles the LTM. The decremented value is returned in the LTR. If 0 on output, t… |
| 1.3.6.1.4.1.2272.1.69.18.1.11 | ColumnrcCfmTransmitLtmSeqNumber | read-only | current | The transaction identifier/sequence number of the first loopback message (to be) sent. |
| 1.3.6.1.4.1.2272.1.69.18.1.12 | ColumnrcCfmTransmitLtmResultOk | read-only | current | Indicates the result of the operation: -true. The Loopback Message(s) will be (or have been) sent. -false. The Loopback Message(s) will not be sent. |
| 1.3.6.1.4.1.2272.1.69.18.1.13 | ColumnrcCfmTransmitLtmStatus | read-write | current | Status of the transmit loopback service: -ready. The service is available. -transmit. The service is transmitting, or about to transmit, the Loopback messages.… |
| 1.3.6.1.4.1.2272.1.69.18.1.14 | ColumnrcCfmTransmitLtmResult | read-only | obsolete | Display the LTM result. |
| 1.3.6.1.4.1.2272.1.69.18.1.15 | ColumnrcCfmTransmitLtmFlag | read-only | current | LTM result flag indicating LTM status or error code. Each enum value represents a status or error case. 1 - No error 2 - Ltm Internal Error 3 - Unknown Remote … |
| 1.3.6.1.4.1.2272.1.69.18.1.16 | ColumnrcCfmTransmitLtmSourceMode | read-write | current | Source modes of the transmit linktrace service. |
| 1.3.6.1.4.1.2272.1.69.19 | TablercCfmPbtTrunkStatsTable | not-accessible | current | Table of PBT trunk statistics. |
| 1.3.6.1.4.1.2272.1.69.19.1 | RowrcCfmPbtTrunkStatsEntry | not-accessible | current | A PBT Trunk Statistics table entry. |
| 1.3.6.1.4.1.2272.1.69.19.1.1 | ColumnrcCfmPbtTrunkStatsName | not-accessible | current | PBT Trunk Name. |
| 1.3.6.1.4.1.2272.1.69.19.1.2 | ColumnrcCfmPbtTrunkStatsPort | read-only | current | PBT Trunk Port |
| 1.3.6.1.4.1.2272.1.69.19.1.3 | ColumnrcCfmPbtTrunkStatsDA | read-only | current | Trunk Mac (remote CP mac) |
| 1.3.6.1.4.1.2272.1.69.19.1.4 | ColumnrcCfmPbtTrunkStatsVlanId | read-only | current | PBT trunk VLAN ID |
| 1.3.6.1.4.1.2272.1.69.19.1.5 | ColumnrcCfmPbtTrunkStatsRevVlanId | read-only | current | PBT trunk reverse VLAN ID |
| 1.3.6.1.4.1.2272.1.69.19.1.6 | ColumnrcCfmPbtTrunkStatsSA | read-only | current | Trunk Source Mac (local switch PBT mac) |
| 1.3.6.1.4.1.2272.1.69.19.1.7 | ColumnrcCfmPbtTrunkStatsRxOctets | read-only | current | Number of Octets received by the trunk.This does not include trunk CCM messag (control) packets. |
| 1.3.6.1.4.1.2272.1.69.19.1.8 | ColumnrcCfmPbtTrunkStatsRxFrames | read-only | current | Number of Packets received by the trunk.This does not include trunk CCM messag (control) packets. |
| 1.3.6.1.4.1.2272.1.69.19.1.9 | ColumnrcCfmPbtTrunkStatsTxOctets | read-only | current | Number of Octets transmitted by the trunk.This does not include trunk CCM messag (control) packets. |
| 1.3.6.1.4.1.2272.1.69.19.1.10 | ColumnrcCfmPbtTrunkStatsTxFrames | read-only | current | Number of Packets transmitted by the trunk.This does not include trunk CCM messag (control) packets. |
| 1.3.6.1.4.1.2272.1.69.19.1.11 | ColumnrcCfmPbtTrunkStatsRxPbit0Octets | read-only | current | Number of Pbit 0 Octets received by the trunk. |
| 1.3.6.1.4.1.2272.1.69.19.1.12 | ColumnrcCfmPbtTrunkStatsRxPbit0Frames | read-only | current | Number of P-Bit 0 Packets received by the trunk. |
| 1.3.6.1.4.1.2272.1.69.19.1.13 | ColumnrcCfmPbtTrunkStatsRxPbit1Octets | read-only | current | Number of Pbit 1 Octets received by the trunk. |
| 1.3.6.1.4.1.2272.1.69.19.1.14 | ColumnrcCfmPbtTrunkStatsRxPbit1Frames | read-only | current | Number of P-Bit 1 Packets received by the trunk. |
| 1.3.6.1.4.1.2272.1.69.19.1.15 | ColumnrcCfmPbtTrunkStatsRxPbit2Octets | read-only | current | Number of Pbit 2 Octets received by the trunk. |
| 1.3.6.1.4.1.2272.1.69.19.1.16 | ColumnrcCfmPbtTrunkStatsRxPbit2Frames | read-only | current | Number of P-Bit 2 Packets received by the trunk. |
| 1.3.6.1.4.1.2272.1.69.19.1.17 | ColumnrcCfmPbtTrunkStatsRxPbit3Octets | read-only | current | Number of Pbit 3 Octets received by the trunk. |
| 1.3.6.1.4.1.2272.1.69.19.1.18 | ColumnrcCfmPbtTrunkStatsRxPbit3Frames | read-only | current | Number of P-Bit 3 Packets received by the trunk. |
| 1.3.6.1.4.1.2272.1.69.19.1.19 | ColumnrcCfmPbtTrunkStatsRxPbit4Octets | read-only | current | Number of Pbit 4 Octets received by the trunk. |
| 1.3.6.1.4.1.2272.1.69.19.1.20 | ColumnrcCfmPbtTrunkStatsRxPbit4Frames | read-only | current | Number of P-Bit 4 Packets received by the trunk. |
| 1.3.6.1.4.1.2272.1.69.19.1.21 | ColumnrcCfmPbtTrunkStatsRxPbit5Octets | read-only | current | Number of Pbit 5 Octets received by the trunk. |
| 1.3.6.1.4.1.2272.1.69.19.1.22 | ColumnrcCfmPbtTrunkStatsRxPbit5Frames | read-only | current | Number of P-Bit 5 Packets received by the trunk. |
| 1.3.6.1.4.1.2272.1.69.19.1.23 | ColumnrcCfmPbtTrunkStatsRxPbit6Octets | read-only | current | Number of Pbit64 Octets received by the trunk. |
| 1.3.6.1.4.1.2272.1.69.19.1.24 | ColumnrcCfmPbtTrunkStatsRxPbit6Frames | read-only | current | Number of P-Bit 6 Packets received by the trunk. |
| 1.3.6.1.4.1.2272.1.69.19.1.25 | ColumnrcCfmPbtTrunkStatsRxPbit7Octets | read-only | current | Number of Pbit64 Octets received by the trunk. |
| 1.3.6.1.4.1.2272.1.69.19.1.26 | ColumnrcCfmPbtTrunkStatsRxPbit7Frames | read-only | current | Number of P-Bit 6 Packets received by the trunk. |
| 1.3.6.1.4.1.2272.1.69.19.1.27 | ColumnrcCfmPbtTrunkStatsTxPbit0Octets | read-only | current | Number of Pbit 0 Octets transmitted by the trunk. |
| 1.3.6.1.4.1.2272.1.69.19.1.28 | ColumnrcCfmPbtTrunkStatsTxPbit0Frames | read-only | current | Number of P-Bit 0 Packets transmitted by the trunk. |
| 1.3.6.1.4.1.2272.1.69.19.1.29 | ColumnrcCfmPbtTrunkStatsTxPbit1Octets | read-only | current | Number of Pbit 1 Octets transmitted by the trunk. |
| 1.3.6.1.4.1.2272.1.69.19.1.30 | ColumnrcCfmPbtTrunkStatsTxPbit1Frames | read-only | current | Number of P-Bit 1 Packets transmitted by the trunk. |
| 1.3.6.1.4.1.2272.1.69.19.1.31 | ColumnrcCfmPbtTrunkStatsTxPbit2Octets | read-only | current | Number of Pbit 2 Octets transmitted by the trunk. |
| 1.3.6.1.4.1.2272.1.69.19.1.32 | ColumnrcCfmPbtTrunkStatsTxPbit2Frames | read-only | current | Number of P-Bit 2 Packets transmitted by the trunk. |
| 1.3.6.1.4.1.2272.1.69.19.1.33 | ColumnrcCfmPbtTrunkStatsTxPbit3Octets | read-only | current | Number of Pbit 3 Octets transmitted by the trunk. |
| 1.3.6.1.4.1.2272.1.69.19.1.34 | ColumnrcCfmPbtTrunkStatsTxPbit3Frames | read-only | current | Number of P-Bit 3 Packets transmitted by the trunk. |
| 1.3.6.1.4.1.2272.1.69.19.1.35 | ColumnrcCfmPbtTrunkStatsTxPbit4Octets | read-only | current | Number of Pbit 4 Octets transmitted by the trunk. |
| 1.3.6.1.4.1.2272.1.69.19.1.36 | ColumnrcCfmPbtTrunkStatsTxPbit4Frames | read-only | current | Number of P-Bit 4 Packets transmitted by the trunk. |
| 1.3.6.1.4.1.2272.1.69.19.1.37 | ColumnrcCfmPbtTrunkStatsTxPbit5Octets | read-only | current | Number of Pbit 5 Octets transmitted by the trunk. |
| 1.3.6.1.4.1.2272.1.69.19.1.38 | ColumnrcCfmPbtTrunkStatsTxPbit5Frames | read-only | current | Number of P-Bit 5 Packets transmitted by the trunk. |
| 1.3.6.1.4.1.2272.1.69.19.1.39 | ColumnrcCfmPbtTrunkStatsTxPbit6Octets | read-only | current | Number of Pbit64 Octets transmitted by the trunk. |
| 1.3.6.1.4.1.2272.1.69.19.1.40 | ColumnrcCfmPbtTrunkStatsTxPbit6Frames | read-only | current | Number of P-Bit 6 Packets transmitted by the trunk. |
| 1.3.6.1.4.1.2272.1.69.19.1.41 | ColumnrcCfmPbtTrunkStatsTxPbit7Octets | read-only | current | Number of Pbit64 Octets transmitted by the trunk. |
| 1.3.6.1.4.1.2272.1.69.19.1.42 | ColumnrcCfmPbtTrunkStatsTxPbit7Frames | read-only | current | Number of P-Bit 6 Packets transmitted by the trunk. |
| 1.3.6.1.4.1.2272.1.69.20 | TablercCfmPortStatsTable | not-accessible | current | CFM Port stats table contains the port Tx and Rx CFM statistics |
| 1.3.6.1.4.1.2272.1.69.20.1 | RowrcCfmPortStatsEntry | not-accessible | current | CFM Port Stats table entry. Contain port's CFM Message sending/receiving counter. |
| 1.3.6.1.4.1.2272.1.69.20.1.1 | ColumnrcCfmPortStatsIndex | not-accessible | current | Slot/Port index |
| 1.3.6.1.4.1.2272.1.69.20.1.2 | ColumnrcCfmPortStatsTxCnt | read-only | current | The total Number of CFM messages that are sent by port |
| 1.3.6.1.4.1.2272.1.69.20.1.3 | ColumnrcCfmPortStatsRxCnt | read-only | current | The total Number of CFM messages are received by port |
| 1.3.6.1.4.1.2272.1.69.21 | TablercCfmFlrTable | not-accessible | current | Frame Loss Ratio Profile table |
| 1.3.6.1.4.1.2272.1.69.21.1 | RowrcCfmFlrEntry | not-accessible | current | Frame Loss Ratio entry. |
| 1.3.6.1.4.1.2272.1.69.21.1.1 | ColumnrcCfmFlrIndex | not-accessible | current | Frame-Loss-Ratio profile index |
| 1.3.6.1.4.1.2272.1.69.21.1.2 | ColumnrcCfmFlrProfileName | read-create | current | Frame-Loss-Ratio Profile Name |
| 1.3.6.1.4.1.2272.1.69.21.1.3 | ColumnrcCfmFlrRowStatus | read-create | current | Used to create/delete entries |
| 1.3.6.1.4.1.2272.1.69.21.1.4 | ColumnrcCfmFlrPriority | read-create | current | Frame Loss Ratio messaging runs on COS priority |
| 1.3.6.1.4.1.2272.1.69.21.1.5 | ColumnrcCfmFlrAlarmThresholdPercent | read-create | current | FLR set alarm threshold percentage |
| 1.3.6.1.4.1.2272.1.69.21.1.6 | ColumnrcCfmFlrAlarmThresholdSubPercent | read-create | current | FLR set alarm threshold percentage in 1/100 percent increments |
| 1.3.6.1.4.1.2272.1.69.21.1.7 | ColumnrcCfmFlrClearThresholdPercent | read-create | current | FLR clear alarm threshold percentage |
| 1.3.6.1.4.1.2272.1.69.21.1.8 | ColumnrcCfmFlrClearThresholdSubPercent | read-create | current | FLR clear alarm threshold percentage in 1/100 percent increments |
| 1.3.6.1.4.1.2272.1.69.21.1.9 | ColumnrcCfmFlrThresholdState | read-create | current | FLR threshold State |
| 1.3.6.1.4.1.2272.1.69.21.1.10 | ColumnrcCfmFlrNumberOfRefs | read-only | current | Number of PMs that reference this flr-profile |
| 1.3.6.1.4.1.2272.1.69.22 | TablercCfmFdTable | not-accessible | current | CFM Frame Delay and Frame Delay Variation Profile table |
| 1.3.6.1.4.1.2272.1.69.22.1 | RowrcCfmFdEntry | not-accessible | current | Frame Delay and Frame Delay Variation entry. |
| 1.3.6.1.4.1.2272.1.69.22.1.1 | ColumnrcCfmFdIndex | not-accessible | current | Frame-Delay profile index |
| 1.3.6.1.4.1.2272.1.69.22.1.2 | ColumnrcCfmFdProfileName | read-create | current | Frame-Delay Profile Name |
| 1.3.6.1.4.1.2272.1.69.22.1.3 | ColumnrcCfmFdRowStatus | read-create | current | Used to create/delete entries |
| 1.3.6.1.4.1.2272.1.69.22.1.4 | ColumnrcCfmFdPriority | read-create | current | Frame Delay messaging runs on COS priority |
| 1.3.6.1.4.1.2272.1.69.22.1.5 | ColumnrcCfmFdPerformanceTarget | read-create | current | Frame delay performance objective in microseconds |
| 1.3.6.1.4.1.2272.1.69.22.1.6 | ColumnrcCfmFdAlarmThresholdPercent | read-create | current | FD set alarm threshold percentage |
| 1.3.6.1.4.1.2272.1.69.22.1.7 | ColumnrcCfmFdAlarmThresholdSubPercent | read-create | current | FD set alarm threshold percentage in 1/100 percent incr ements |
| 1.3.6.1.4.1.2272.1.69.22.1.8 | ColumnrcCfmFdClearThresholdPercent | read-create | current | FD clear alarm threshold percentage |
| 1.3.6.1.4.1.2272.1.69.22.1.9 | ColumnrcCfmFdClearThresholdSubPercent | read-create | current | FD clear alarm threshold percentage in 1/100 percent in crements |
| 1.3.6.1.4.1.2272.1.69.22.1.10 | ColumnrcCfmFdFdvPerformanceTarget | read-create | current | Frame delay variation performance objective in microseconds |
| 1.3.6.1.4.1.2272.1.69.22.1.11 | ColumnrcCfmFdFdvAlarmThresholdPercent | read-create | current | FDV set alarm threshold percentage |
| 1.3.6.1.4.1.2272.1.69.22.1.12 | ColumnrcCfmFdFdvAlarmThresholdSubPercent | read-create | current | FDV set alarm threshold percentage in 1/100 percent inc rements |
| 1.3.6.1.4.1.2272.1.69.22.1.13 | ColumnrcCfmFdFdvClearThresholdPercent | read-create | current | FDV clear alarm threshold percentage |
| 1.3.6.1.4.1.2272.1.69.22.1.14 | ColumnrcCfmFdFdvClearThresholdSubPercent | read-create | current | FDV clear alarm threshold percentage in 1/100 percent i ncrements |
| 1.3.6.1.4.1.2272.1.69.22.1.15 | ColumnrcCfmFdThresholdState | read-create | current | FD / FDV threshold State |
| 1.3.6.1.4.1.2272.1.69.22.1.16 | ColumnrcCfmFdNumberOfRefs | read-only | current | Number of PM's that referencen this fd-profile |
| 1.3.6.1.4.1.2272.1.69.23 | TablercCfmFlrStatsInfoTable | not-accessible | current | CFM Frame Loss Ratio Stats Info |
| 1.3.6.1.4.1.2272.1.69.23.1 | RowrcCfmFlrStatsInfoEntry | not-accessible | current | Frame Loss Ratio Stats Info entry. |
| 1.3.6.1.4.1.2272.1.69.23.1.1 | ColumnrcCfmFlrStatsInfoMdIndex | not-accessible | current | Maintenance Domain Name |
| 1.3.6.1.4.1.2272.1.69.23.1.2 | ColumnrcCfmFlrStatsInfoMaIndex | not-accessible | current | Maintenance Association Name |
| 1.3.6.1.4.1.2272.1.69.23.1.3 | ColumnrcCfmFlrStatsInfoMepId | not-accessible | current | Maintenance EndPoint ID |
| 1.3.6.1.4.1.2272.1.69.23.1.4 | ColumnrcCfmFlrStatsInfoRmepId | not-accessible | current | Peer Identifier which matches a RemoteMepId. The performance monitoring pair is MepId-RmepId |
| 1.3.6.1.4.1.2272.1.69.23.1.5 | ColumnrcCfmFlrStatsInfoPriorityIndex | not-accessible | current | priorityIndex equals priority plus 1 - priority can't be used as an index since it starts from 0 |
| 1.3.6.1.4.1.2272.1.69.23.1.6 | ColumnrcCfmFlrStatsInfoMdName | read-only | current | Maintenance Domain Name |
| 1.3.6.1.4.1.2272.1.69.23.1.7 | ColumnrcCfmFlrStatsInfoMaName | read-only | current | Maintenance Association Name |
| 1.3.6.1.4.1.2272.1.69.23.1.8 | ColumnrcCfmFlrStatsInfoPriority | read-only | current | Frame Loss Ratio messaging runs on COS priority |
| 1.3.6.1.4.1.2272.1.69.23.1.9 | ColumnrcCfmFlrStatsInfoNearEndPercent | read-only | current | Measured near-end FLR percentage |
| 1.3.6.1.4.1.2272.1.69.23.1.10 | ColumnrcCfmFlrStatsInfoNearEndSubPercent | read-only | current | Measured near-end FLR sub percentage |
| 1.3.6.1.4.1.2272.1.69.23.1.11 | ColumnrcCfmFlrStatsInfoFarEndPercent | read-only | current | Measured far-end FLR percentage |
| 1.3.6.1.4.1.2272.1.69.23.1.12 | ColumnrcCfmFlrStatsInfoFarEndSubPercent | read-only | current | Measured far-end FLR sub percentage |
| 1.3.6.1.4.1.2272.1.69.23.1.13 | ColumnrcCfmFlrStatsInfoPmOperState | read-only | current | The operational state of the PM. |
| 1.3.6.1.4.1.2272.1.69.24 | TablercCfmFlrStatsCurrTable | not-accessible | current | CFM Frame Loss Ratio Stats Current |
| 1.3.6.1.4.1.2272.1.69.24.1 | RowrcCfmFlrStatsCurrEntry | not-accessible | current | CFM Frame Loss Ratio Stats Current entry. |
| 1.3.6.1.4.1.2272.1.69.24.1.1 | ColumnrcCfmFlrStatsCurrMdIndex | not-accessible | current | Maintenance Domain Name |
| 1.3.6.1.4.1.2272.1.69.24.1.2 | ColumnrcCfmFlrStatsCurrMaIndex | not-accessible | current | Maintenance Association Name |
| 1.3.6.1.4.1.2272.1.69.24.1.3 | ColumnrcCfmFlrStatsCurrMepId | not-accessible | current | Maintenance EndPoint ID |
| 1.3.6.1.4.1.2272.1.69.24.1.4 | ColumnrcCfmFlrStatsCurrRmepId | not-accessible | current | Peer Identifier which matches a RemoteMepId. The performance monitoring pair is MepId-RmepId |
| 1.3.6.1.4.1.2272.1.69.24.1.5 | ColumnrcCfmFlrStatsCurrPriorityIndex | not-accessible | current | priorityIndex equals priority plus 1 - priority can't be used as an index since it starts from 0 |
| 1.3.6.1.4.1.2272.1.69.24.1.6 | ColumnrcCfmFlrStatsCurrMdName | read-only | current | Maintenance Domain Name |
| 1.3.6.1.4.1.2272.1.69.24.1.7 | ColumnrcCfmFlrStatsCurrMaName | read-only | current | Maintenance Association Name |
| 1.3.6.1.4.1.2272.1.69.24.1.8 | ColumnrcCfmFlrStatsCurrPriority | read-only | current | Frame Loss Ratio messaging runs on COS priority |
| 1.3.6.1.4.1.2272.1.69.24.1.9 | ColumnrcCfmFlrStatsCurrPmOperState | read-only | current | The operational state of the PM. |
| 1.3.6.1.4.1.2272.1.69.24.1.10 | ColumnrcCfmFlrStatsCurrStartTime | read-only | current | The date and time stamp. |
| 1.3.6.1.4.1.2272.1.69.24.1.11 | ColumnrcCfmFlrStatsCurrEndTime | read-only | current | The date and time stamp. |
| 1.3.6.1.4.1.2272.1.69.24.1.12 | ColumnrcCfmFlrStatsCurrHistInterval | read-only | current | History Interval |
| 1.3.6.1.4.1.2272.1.69.24.1.13 | ColumnrcCfmFlrStatsCurrSampleRate | read-only | current | Sample rate in seconds |
| 1.3.6.1.4.1.2272.1.69.24.1.14 | ColumnrcCfmFlrStatsCurrNearEndPercent | read-only | current | Measured near-end FLR percentage |
| 1.3.6.1.4.1.2272.1.69.24.1.15 | ColumnrcCfmFlrStatsCurrNearEndSubPercent | read-only | current | Measured near-end FLR sub percentage |
| 1.3.6.1.4.1.2272.1.69.24.1.16 | ColumnrcCfmFlrStatsCurrFarEndPercent | read-only | current | Measured far-end FLR percentage |
| 1.3.6.1.4.1.2272.1.69.24.1.17 | ColumnrcCfmFlrStatsCurrFarEndSubPercent | read-only | current | Measured far-end FLR sub percentage |
| 1.3.6.1.4.1.2272.1.69.24.1.18 | ColumnrcCfmFlrStatsCurrMinNearEndPercent | read-only | current | Measured near-end FLR percentage |
| 1.3.6.1.4.1.2272.1.69.24.1.19 | ColumnrcCfmFlrStatsCurrMinNearEndSubPercent | read-only | current | Measured near-end FLR sub percentage |
| 1.3.6.1.4.1.2272.1.69.24.1.20 | ColumnrcCfmFlrStatsCurrMinFarEndPercent | read-only | current | Measured near-end FLR percentage |
| 1.3.6.1.4.1.2272.1.69.24.1.21 | ColumnrcCfmFlrStatsCurrMinFarEndSubPercent | read-only | current | Measured near-end FLR sub percentage |
| 1.3.6.1.4.1.2272.1.69.24.1.22 | ColumnrcCfmFlrStatsCurrMaxNearEndPercent | read-only | current | Measured near-end FLR percentage |
| 1.3.6.1.4.1.2272.1.69.24.1.23 | ColumnrcCfmFlrStatsCurrMaxNearEndSubPercent | read-only | current | Measured near-end FLR sub percentage |
| 1.3.6.1.4.1.2272.1.69.24.1.24 | ColumnrcCfmFlrStatsCurrMaxFarEndPercent | read-only | current | Measured near-end FLR percentage |
| 1.3.6.1.4.1.2272.1.69.24.1.25 | ColumnrcCfmFlrStatsCurrMaxFarEndSubPercent | read-only | current | Measured near-end FLR sub percentage |
| 1.3.6.1.4.1.2272.1.69.24.1.26 | ColumnrcCfmFlrStatsCurrTxFrames | read-only | current | Tx frames |
| 1.3.6.1.4.1.2272.1.69.24.1.27 | ColumnrcCfmFlrStatsCurrRxFrames | read-only | current | Rx frames |
| 1.3.6.1.4.1.2272.1.69.24.1.28 | ColumnrcCfmFlrStatsCurrFlFrames | read-only | current | Frame Loss frames |
| 1.3.6.1.4.1.2272.1.69.24.1.29 | ColumnrcCfmFlrStatsCurrTxFarEndFrames | read-only | current | Far-end Tx frames |
| 1.3.6.1.4.1.2272.1.69.24.1.30 | ColumnrcCfmFlrStatsCurrRxFarEndFrames | read-only | current | Far-end Rx frames |
| 1.3.6.1.4.1.2272.1.69.24.1.31 | ColumnrcCfmFlrStatsCurrFlFarEndFrames | read-only | current | Far-end Frame Loss frames |
| 1.3.6.1.4.1.2272.1.69.24.1.32 | ColumnrcCfmFlrStatsCurrSamplesPerInterval | read-only | current | Samples per interval |
| 1.3.6.1.4.1.2272.1.69.24.1.33 | ColumnrcCfmFlrStatsCurrSamplesTransmitted | read-only | current | Samples transmitted |
| 1.3.6.1.4.1.2272.1.69.24.1.34 | ColumnrcCfmFlrStatsCurrMinFlFrames | read-only | current | Minimum sample Frame Loss frames |
| 1.3.6.1.4.1.2272.1.69.24.1.35 | ColumnrcCfmFlrStatsCurrSamplesNotSent | read-only | current | Samples not sent |
| 1.3.6.1.4.1.2272.1.69.24.1.36 | ColumnrcCfmFlrStatsCurrSamplesReceived | read-only | current | Samples received |
| 1.3.6.1.4.1.2272.1.69.24.1.37 | ColumnrcCfmFlrStatsCurrMinFlFarEndFrames | read-only | current | Minimum sample Far-end Frame Loss frames |
| 1.3.6.1.4.1.2272.1.69.24.1.38 | ColumnrcCfmFlrStatsCurrMaxFlFrames | read-only | current | Maximum sample Frame Loss frames |
| 1.3.6.1.4.1.2272.1.69.24.1.39 | ColumnrcCfmFlrStatsCurrMaxFlFarEndFrames | read-only | current | Maximum sample Far-end Frame Loss frames |
| 1.3.6.1.4.1.2272.1.69.25 | TablercCfmFlrStatsHistTable | not-accessible | current | CFM Frame Loss Ratio Stats History |
| 1.3.6.1.4.1.2272.1.69.25.1 | RowrcCfmFlrStatsHistEntry | not-accessible | current | CFM Frame Loss Ratio Stats History entry. |
| 1.3.6.1.4.1.2272.1.69.25.1.1 | ColumnrcCfmFlrStatsHistMdIndex | not-accessible | current | Maintenance Domain Name |
| 1.3.6.1.4.1.2272.1.69.25.1.2 | ColumnrcCfmFlrStatsHistMaIndex | not-accessible | current | Maintenance Association Name |
| 1.3.6.1.4.1.2272.1.69.25.1.3 | ColumnrcCfmFlrStatsHistMepId | not-accessible | current | Maintenance EndPoint ID |
| 1.3.6.1.4.1.2272.1.69.25.1.4 | ColumnrcCfmFlrStatsHistRmepId | not-accessible | current | Peer Identifier which matches a RemoteMepId. The performance monitoring pair is MepId-RmepId |
| 1.3.6.1.4.1.2272.1.69.25.1.5 | ColumnrcCfmFlrStatsHistPriorityIndex | not-accessible | current | priorityIndex equals priority plus 1 - priority can't be used as an index since it starts from 0 |
| 1.3.6.1.4.1.2272.1.69.25.1.6 | ColumnrcCfmFlrStatsHistIndex | not-accessible | current | History Index |
| 1.3.6.1.4.1.2272.1.69.25.1.7 | ColumnrcCfmFlrStatsHistMdName | read-only | current | Maintenance Domain Name |
| 1.3.6.1.4.1.2272.1.69.25.1.8 | ColumnrcCfmFlrStatsHistMaName | read-only | current | Maintenance Association Name |
| 1.3.6.1.4.1.2272.1.69.25.1.9 | ColumnrcCfmFlrStatsHistPriority | read-only | current | Frame Loss Ratio messaging runs on COS priority |
| 1.3.6.1.4.1.2272.1.69.25.1.10 | ColumnrcCfmFlrStatsHistStatus | read-only | current | The status of this history interval. |
| 1.3.6.1.4.1.2272.1.69.25.1.11 | ColumnrcCfmFlrStatsHistStartTime | read-only | current | The date and time stamp. |
| 1.3.6.1.4.1.2272.1.69.25.1.12 | ColumnrcCfmFlrStatsHistEndTime | read-only | current | The date and time stamp. |
| 1.3.6.1.4.1.2272.1.69.25.1.13 | ColumnrcCfmFlrStatsHistHistInterval | read-only | current | History Interval |
| 1.3.6.1.4.1.2272.1.69.25.1.14 | ColumnrcCfmFlrStatsHistSampleRate | read-only | current | Sample rate in seconds |
| 1.3.6.1.4.1.2272.1.69.25.1.15 | ColumnrcCfmFlrStatsHistNearEndPercent | read-only | current | Measured near-end FLR percentage |
| 1.3.6.1.4.1.2272.1.69.25.1.16 | ColumnrcCfmFlrStatsHistNearEndSubPercent | read-only | current | Measured near-end FLR sub percentage |
| 1.3.6.1.4.1.2272.1.69.25.1.17 | ColumnrcCfmFlrStatsHistFarEndPercent | read-only | current | Measured far-end FLR percentage |
| 1.3.6.1.4.1.2272.1.69.25.1.18 | ColumnrcCfmFlrStatsHistFarEndSubPercent | read-only | current | Measured far-end FLR sub percentage |
| 1.3.6.1.4.1.2272.1.69.25.1.19 | ColumnrcCfmFlrStatsHistMinNearEndPercent | read-only | current | Measured near-end FLR percentage |
| 1.3.6.1.4.1.2272.1.69.25.1.20 | ColumnrcCfmFlrStatsHistMinNearEndSubPercent | read-only | current | Measured near-end FLR sub percentage |
| 1.3.6.1.4.1.2272.1.69.25.1.21 | ColumnrcCfmFlrStatsHistMinFarEndPercent | read-only | current | Measured near-end FLR percentage |
| 1.3.6.1.4.1.2272.1.69.25.1.22 | ColumnrcCfmFlrStatsHistMinFarEndSubPercent | read-only | current | Measured near-end FLR sub percentage |
| 1.3.6.1.4.1.2272.1.69.25.1.23 | ColumnrcCfmFlrStatsHistMaxNearEndPercent | read-only | current | Measured near-end FLR percentage |
| 1.3.6.1.4.1.2272.1.69.25.1.24 | ColumnrcCfmFlrStatsHistMaxNearEndSubPercent | read-only | current | Measured near-end FLR sub percentage |
| 1.3.6.1.4.1.2272.1.69.25.1.25 | ColumnrcCfmFlrStatsHistMaxFarEndPercent | read-only | current | Measured near-end FLR percentage |
| 1.3.6.1.4.1.2272.1.69.25.1.26 | ColumnrcCfmFlrStatsHistMaxFarEndSubPercent | read-only | current | Measured near-end FLR sub percentage |
| 1.3.6.1.4.1.2272.1.69.25.1.27 | ColumnrcCfmFlrStatsHistTxFrames | read-only | current | Tx frames |
| 1.3.6.1.4.1.2272.1.69.25.1.28 | ColumnrcCfmFlrStatsHistRxFrames | read-only | current | Rx frames |
| 1.3.6.1.4.1.2272.1.69.25.1.29 | ColumnrcCfmFlrStatsHistFlFrames | read-only | current | Frame Loss frames |
| 1.3.6.1.4.1.2272.1.69.25.1.30 | ColumnrcCfmFlrStatsHistTxFarEndFrames | read-only | current | Far-end Tx frames |
| 1.3.6.1.4.1.2272.1.69.25.1.31 | ColumnrcCfmFlrStatsHistRxFarEndFrames | read-only | current | Far-end Rx frames |
| 1.3.6.1.4.1.2272.1.69.25.1.32 | ColumnrcCfmFlrStatsHistFlFarEndFrames | read-only | current | Far-end Frame Loss frames |
| 1.3.6.1.4.1.2272.1.69.25.1.33 | ColumnrcCfmFlrStatsHistSamplesPerInterval | read-only | current | Samples per interval |
| 1.3.6.1.4.1.2272.1.69.25.1.34 | ColumnrcCfmFlrStatsHistSamplesTransmitted | read-only | current | Samples transmitted |
| 1.3.6.1.4.1.2272.1.69.25.1.35 | ColumnrcCfmFlrStatsHistMinFlFrames | read-only | current | Minimum sample Frame Loss frames |
| 1.3.6.1.4.1.2272.1.69.25.1.36 | ColumnrcCfmFlrStatsHistSamplesNotSent | read-only | current | Samples not sent |
| 1.3.6.1.4.1.2272.1.69.25.1.37 | ColumnrcCfmFlrStatsHistSamplesReceived | read-only | current | Samples received |
| 1.3.6.1.4.1.2272.1.69.25.1.38 | ColumnrcCfmFlrStatsHistMinFlFarEndFrames | read-only | current | Minimum sample Far-end Frame Loss frames |
| 1.3.6.1.4.1.2272.1.69.25.1.39 | ColumnrcCfmFlrStatsHistMaxFlFrames | read-only | current | Maximum sample Frame Loss frames |
| 1.3.6.1.4.1.2272.1.69.25.1.40 | ColumnrcCfmFlrStatsHistMaxFlFarEndFrames | read-only | current | Maximum sample Far-end Frame Loss frames |
| 1.3.6.1.4.1.2272.1.69.26 | TablercCfmFdStatsInfoTable | not-accessible | current | CFM Frame Delay Stats Info |
| 1.3.6.1.4.1.2272.1.69.26.1 | RowrcCfmFdStatsInfoEntry | not-accessible | current | Frame Delay Stats Info entry. |
| 1.3.6.1.4.1.2272.1.69.26.1.1 | ColumnrcCfmFdStatsInfoMdIndex | not-accessible | current | Maintenance Domain Name |
| 1.3.6.1.4.1.2272.1.69.26.1.2 | ColumnrcCfmFdStatsInfoMaIndex | not-accessible | current | Maintenance Association Name |
| 1.3.6.1.4.1.2272.1.69.26.1.3 | ColumnrcCfmFdStatsInfoMepId | not-accessible | current | Maintenance EndPoint ID |
| 1.3.6.1.4.1.2272.1.69.26.1.4 | ColumnrcCfmFdStatsInfoRmepId | not-accessible | current | Peer Identifier which matches a RemoteMepId. The performance monitoring pair is MepId-RmepId |
| 1.3.6.1.4.1.2272.1.69.26.1.5 | ColumnrcCfmFdStatsInfoPriorityIndex | not-accessible | current | priorityIndex equals priority plus 1 - priority can't be used as an index since it starts from 0 |
| 1.3.6.1.4.1.2272.1.69.26.1.6 | ColumnrcCfmFdStatsInfoMdName | read-only | current | Maintenance Domain Name |
| 1.3.6.1.4.1.2272.1.69.26.1.7 | ColumnrcCfmFdStatsInfoMaName | read-only | current | Maintenance Association Name |
| 1.3.6.1.4.1.2272.1.69.26.1.8 | ColumnrcCfmFdStatsInfoPriority | read-only | current | Frame Delay messaging runs on COS priority |
| 1.3.6.1.4.1.2272.1.69.26.1.9 | ColumnrcCfmFdStatsInfoFdPercent | read-only | current | Measured FD percentage |
| 1.3.6.1.4.1.2272.1.69.26.1.10 | ColumnrcCfmFdStatsInfoFdSubPercent | read-only | current | Measured FD sub percentage |
| 1.3.6.1.4.1.2272.1.69.26.1.11 | ColumnrcCfmFdStatsInfoFdvPercent | read-only | current | Measured FDV percentage |
| 1.3.6.1.4.1.2272.1.69.26.1.12 | ColumnrcCfmFdStatsInfoFdvSubPercent | read-only | current | Measured FDV sub percentage |
| 1.3.6.1.4.1.2272.1.69.26.1.13 | ColumnrcCfmFdStatsInfoPmOperState | read-only | current | The operational state of the PM. |
| 1.3.6.1.4.1.2272.1.69.27 | TablercCfmFdStatsCurrTable | not-accessible | current | CFM Frame Delay Stats Current |
| 1.3.6.1.4.1.2272.1.69.27.1 | RowrcCfmFdStatsCurrEntry | not-accessible | current | CFM Frame Delay Stats Current entry. |
| 1.3.6.1.4.1.2272.1.69.27.1.1 | ColumnrcCfmFdStatsCurrMdIndex | not-accessible | current | Maintenance Domain Name |
| 1.3.6.1.4.1.2272.1.69.27.1.2 | ColumnrcCfmFdStatsCurrMaIndex | not-accessible | current | Maintenance Association Name |
| 1.3.6.1.4.1.2272.1.69.27.1.3 | ColumnrcCfmFdStatsCurrMepId | not-accessible | current | Maintenance EndPoint ID |
| 1.3.6.1.4.1.2272.1.69.27.1.4 | ColumnrcCfmFdStatsCurrRmepId | not-accessible | current | Peer Identifier which matches a RemoteMepId. The performance monitoring pair is MepId-RmepId |
| 1.3.6.1.4.1.2272.1.69.27.1.5 | ColumnrcCfmFdStatsCurrPriorityIndex | not-accessible | current | priorityIndex equals priority plus 1 - priority can't be used as an index since it starts from 0 |
| 1.3.6.1.4.1.2272.1.69.27.1.6 | ColumnrcCfmFdStatsCurrMdName | read-only | current | Maintenance Domain Name |
| 1.3.6.1.4.1.2272.1.69.27.1.7 | ColumnrcCfmFdStatsCurrMaName | read-only | current | Maintenance Association Name |
| 1.3.6.1.4.1.2272.1.69.27.1.8 | ColumnrcCfmFdStatsCurrPriority | read-only | current | Frame Delay messaaging runs on COS priority |
| 1.3.6.1.4.1.2272.1.69.27.1.9 | ColumnrcCfmFdStatsCurrFdPercent | read-only | current | Measured FD percentage |
| 1.3.6.1.4.1.2272.1.69.27.1.10 | ColumnrcCfmFdStatsCurrFdSubPercent | read-only | current | Measured FD sub percentage |
| 1.3.6.1.4.1.2272.1.69.27.1.11 | ColumnrcCfmFdStatsCurrFdvPercent | read-only | current | Measured FDV percentage |
| 1.3.6.1.4.1.2272.1.69.27.1.12 | ColumnrcCfmFdStatsCurrFdvSubPercent | read-only | current | Measured FDV sub percentage |
| 1.3.6.1.4.1.2272.1.69.27.1.13 | ColumnrcCfmFdStatsCurrPmOperState | read-only | current | The operational state of the PM. |
| 1.3.6.1.4.1.2272.1.69.27.1.14 | ColumnrcCfmFdStatsCurrStartTime | read-only | current | The date and time stamp. |
| 1.3.6.1.4.1.2272.1.69.27.1.15 | ColumnrcCfmFdStatsCurrEndTime | read-only | current | The date and time stamp. |
| 1.3.6.1.4.1.2272.1.69.27.1.16 | ColumnrcCfmFdStatsCurrHistInterval | read-only | current | History Interval |
| 1.3.6.1.4.1.2272.1.69.27.1.17 | ColumnrcCfmFdStatsCurrSampleRate | read-only | current | Sample rate in seconds |
| 1.3.6.1.4.1.2272.1.69.27.1.18 | ColumnrcCfmFdStatsCurrTarget | read-only | current | FD target in microseconds |
| 1.3.6.1.4.1.2272.1.69.27.1.19 | ColumnrcCfmFdStatsCurrAverage | read-only | current | FD average in microseconds |
| 1.3.6.1.4.1.2272.1.69.27.1.20 | ColumnrcCfmFdStatsCurrMinimum | read-only | current | FD minimum in microseconds |
| 1.3.6.1.4.1.2272.1.69.27.1.21 | ColumnrcCfmFdStatsCurrMaximum | read-only | current | FD maximum in microseconds |
| 1.3.6.1.4.1.2272.1.69.27.1.22 | ColumnrcCfmFdStatsCurrFdvTarget | read-only | current | FDV target in microseconds |
| 1.3.6.1.4.1.2272.1.69.27.1.23 | ColumnrcCfmFdStatsCurrFdvAverage | read-only | current | FDV average in microseconds |
| 1.3.6.1.4.1.2272.1.69.27.1.24 | ColumnrcCfmFdStatsCurrFdvMinimum | read-only | current | FDV minimum in microseconds |
| 1.3.6.1.4.1.2272.1.69.27.1.25 | ColumnrcCfmFdStatsCurrFdvMaximum | read-only | current | FDV maximum in microseconds |
| 1.3.6.1.4.1.2272.1.69.27.1.26 | ColumnrcCfmFdStatsCurrSamplesPerInterval | read-only | current | Samples per interval |
| 1.3.6.1.4.1.2272.1.69.27.1.27 | ColumnrcCfmFdStatsCurrSamplesTransmitted | read-only | current | Samples transmitted |
| 1.3.6.1.4.1.2272.1.69.27.1.28 | ColumnrcCfmFdStatsCurrSamplesNotSent | read-only | current | Samples not sent |
| 1.3.6.1.4.1.2272.1.69.27.1.29 | ColumnrcCfmFdStatsCurrSamplesReceived | read-only | current | Samples received |
| 1.3.6.1.4.1.2272.1.69.28 | TablercCfmFdStatsHistTable | not-accessible | current | CFM Frame Delay Stats History |
| 1.3.6.1.4.1.2272.1.69.28.1 | RowrcCfmFdStatsHistEntry | not-accessible | current | CFM Frame Delay Stats History entry. |
| 1.3.6.1.4.1.2272.1.69.28.1.1 | ColumnrcCfmFdStatsHistMdIndex | not-accessible | current | Maintenance Domain Name |
| 1.3.6.1.4.1.2272.1.69.28.1.2 | ColumnrcCfmFdStatsHistMaIndex | not-accessible | current | Maintenance Association Name |
| 1.3.6.1.4.1.2272.1.69.28.1.3 | ColumnrcCfmFdStatsHistMepId | not-accessible | current | Maintenance EndPoint ID |
| 1.3.6.1.4.1.2272.1.69.28.1.4 | ColumnrcCfmFdStatsHistRmepId | not-accessible | current | Peer Identifier which matches a RemoteMepId. The performance monitoring pair is MepId-RmepId |
| 1.3.6.1.4.1.2272.1.69.28.1.5 | ColumnrcCfmFdStatsHistPriorityIndex | not-accessible | current | priorityIndex equals priority plus 1 - priority can't be used as an index since it starts from 0 |
| 1.3.6.1.4.1.2272.1.69.28.1.6 | ColumnrcCfmFdStatsHistIndex | not-accessible | current | History Index |
| 1.3.6.1.4.1.2272.1.69.28.1.7 | ColumnrcCfmFdStatsHistMdName | read-only | current | Maintenance Domain Name |
| 1.3.6.1.4.1.2272.1.69.28.1.8 | ColumnrcCfmFdStatsHistMaName | read-only | current | Maintenance Association Name |
| 1.3.6.1.4.1.2272.1.69.28.1.9 | ColumnrcCfmFdStatsHistPriority | read-only | current | Frame Delay messaging runs on COS priority |
| 1.3.6.1.4.1.2272.1.69.28.1.10 | ColumnrcCfmFdStatsHistFdPercent | read-only | current | Measured FD percentage |
| 1.3.6.1.4.1.2272.1.69.28.1.11 | ColumnrcCfmFdStatsHistFdSubPercent | read-only | current | Measured FD sub percentage |
| 1.3.6.1.4.1.2272.1.69.28.1.12 | ColumnrcCfmFdStatsHistFdvPercent | read-only | current | Measured FDV percentage |
| 1.3.6.1.4.1.2272.1.69.28.1.13 | ColumnrcCfmFdStatsHistFdvSubPercent | read-only | current | Measured FDV sub percentage |
| 1.3.6.1.4.1.2272.1.69.28.1.14 | ColumnrcCfmFdStatsHistStatus | read-only | current | The status of this history interval. |
| 1.3.6.1.4.1.2272.1.69.28.1.15 | ColumnrcCfmFdStatsHistStartTime | read-only | current | The date and time stamp. |
| 1.3.6.1.4.1.2272.1.69.28.1.16 | ColumnrcCfmFdStatsHistEndTime | read-only | current | The date and time stamp. |
| 1.3.6.1.4.1.2272.1.69.28.1.17 | ColumnrcCfmFdStatsHistHistInterval | read-only | current | History Interval |
| 1.3.6.1.4.1.2272.1.69.28.1.18 | ColumnrcCfmFdStatsHistSampleRate | read-only | current | Sample rate in seconds |
| 1.3.6.1.4.1.2272.1.69.28.1.19 | ColumnrcCfmFdStatsHistTarget | read-only | current | FD target in microseconds |
| 1.3.6.1.4.1.2272.1.69.28.1.20 | ColumnrcCfmFdStatsHistAverage | read-only | current | FD average in microseconds |
| 1.3.6.1.4.1.2272.1.69.28.1.21 | ColumnrcCfmFdStatsHistMinimum | read-only | current | FD minimum in microseconds |
| 1.3.6.1.4.1.2272.1.69.28.1.22 | ColumnrcCfmFdStatsHistMaximum | read-only | current | FD maximum in microseconds |
| 1.3.6.1.4.1.2272.1.69.28.1.23 | ColumnrcCfmFdStatsHistFdvTarget | read-only | current | FDV target in microseconds |
| 1.3.6.1.4.1.2272.1.69.28.1.24 | ColumnrcCfmFdStatsHistFdvAverage | read-only | current | FDV average in microseconds |
| 1.3.6.1.4.1.2272.1.69.28.1.25 | ColumnrcCfmFdStatsHistFdvMinimum | read-only | current | FDV minimum in microseconds |
| 1.3.6.1.4.1.2272.1.69.28.1.26 | ColumnrcCfmFdStatsHistFdvMaximum | read-only | current | FDV maximum in microseconds |
| 1.3.6.1.4.1.2272.1.69.28.1.27 | ColumnrcCfmFdStatsHistSamplesPerInterval | read-only | current | Samples per interval |
| 1.3.6.1.4.1.2272.1.69.28.1.28 | ColumnrcCfmFdStatsHistSamplesTransmitted | read-only | current | Samples transmitted |
| 1.3.6.1.4.1.2272.1.69.28.1.29 | ColumnrcCfmFdStatsHistSamplesNotSent | read-only | current | Samples not sent |
| 1.3.6.1.4.1.2272.1.69.28.1.30 | ColumnrcCfmFdStatsHistSamplesReceived | read-only | current | Samples received |
| 1.3.6.1.4.1.2272.1.69.29 | TablercCfmPmTable | not-accessible | current | CFM Performance Monitoring Configuration |
| 1.3.6.1.4.1.2272.1.69.29.1 | RowrcCfmPmEntry | not-accessible | current | Connectivity Fault Management Performance Monitoring entry. |
| 1.3.6.1.4.1.2272.1.69.29.1.1 | ColumnrcCfmPmMdIndex | not-accessible | current | Maintenance Domain Name |
| 1.3.6.1.4.1.2272.1.69.29.1.2 | ColumnrcCfmPmMaIndex | not-accessible | current | Maintenance Association Name |
| 1.3.6.1.4.1.2272.1.69.29.1.3 | ColumnrcCfmPmMepId | not-accessible | current | Maintenance EndPoint ID |
| 1.3.6.1.4.1.2272.1.69.29.1.4 | ColumnrcCfmPmRmepId | not-accessible | current | Remote Maintenance Endpoint ID. The performance monitoring pair is MepId-RmepId |
| 1.3.6.1.4.1.2272.1.69.29.1.5 | ColumnrcCfmPmMdName | read-only | current | Maintenance Domain Name |
| 1.3.6.1.4.1.2272.1.69.29.1.6 | ColumnrcCfmPmMaName | read-only | current | Maintenance Association Name |
| 1.3.6.1.4.1.2272.1.69.29.1.7 | ColumnrcCfmPmRowStatus | read-create | current | Used to create/delete entries |
| 1.3.6.1.4.1.2272.1.69.29.1.8 | ColumnrcCfmPmState | read-create | current | Performance Monitoring State |
| 1.3.6.1.4.1.2272.1.69.29.1.9 | ColumnrcCfmPmFdList | read-create | current | Comma separated list of Frame-Delay profile names. Valid profile names must first be created using rcCfmFdProfileName. Number of entries in the list is indicat… |
| 1.3.6.1.4.1.2272.1.69.29.1.10 | ColumnrcCfmPmFdSize | read-only | current | Number of Frame-Delay profiles names |
| 1.3.6.1.4.1.2272.1.69.29.1.11 | ColumnrcCfmPmFlrList | read-create | current | Comma separated list of Frame-Loss-Ratio profile names. Valid profile names must first be created using rcCfmFlrProfileName. Number of entries in the list is i… |
| 1.3.6.1.4.1.2272.1.69.29.1.12 | ColumnrcCfmPmFlrSize | read-only | current | Number of FLR profile names in FLR list |
| 1.3.6.1.4.1.2272.1.69.29.1.13 | ColumnrcCfmPmHistoryInterval | read-create | current | History summary interval in minutes |
| 1.3.6.1.4.1.2272.1.69.29.1.14 | ColumnrcCfmPmSampleRate | read-create | current | Sample rate once per sample interval specified in seconds |
| 1.3.6.1.4.1.2272.1.69.32 | TablercCfmLtrTable | not-accessible | current | This table contains a list of Linktrace replies received by a specific MEP in response to a linktrace message. |
| 1.3.6.1.4.1.2272.1.69.32.1 | RowrcCfmLtrEntry | not-accessible | current | The Linktrace Reply table entry. |
| 1.3.6.1.4.1.2272.1.69.32.1.1 | ColumnrcCfmLtrDomainIndex | not-accessible | current | Maintenance Domain Index |
| 1.3.6.1.4.1.2272.1.69.32.1.2 | ColumnrcCfmLtrAssociationIndex | not-accessible | current | Maintenance Association Index |
| 1.3.6.1.4.1.2272.1.69.32.1.3 | ColumnrcCfmLtrMepId | not-accessible | current | Maintenance EndPoint ID |
| 1.3.6.1.4.1.2272.1.69.32.1.4 | ColumnrcCfmLtrSeqNumber | not-accessible | current | The transaction identifier/sequence number returned by a previous transmit linkrace message command, indicating which LTM's response is going to be returned. |
| 1.3.6.1.4.1.2272.1.69.32.1.5 | ColumnrcCfmLtrTtl | not-accessible | current | Ttl field value for a returned LTR. |
| 1.3.6.1.4.1.2272.1.69.32.1.6 | ColumnrcCfmLtrReceiveOrder | not-accessible | current | An index to distinguish among multiple LTRs with the same LTR Transaction Identifier field value. This value is assigned sequentially from 1, in the order that… |
| 1.3.6.1.4.1.2272.1.69.32.1.7 | ColumnrcCfmLtrDomainName | read-only | current | Maintenance Domain Name |
| 1.3.6.1.4.1.2272.1.69.32.1.8 | ColumnrcCfmLtrAssociationName | read-only | current | Maintenance Association Name |
| 1.3.6.1.4.1.2272.1.69.32.1.9 | ColumnrcCfmLtrForwarded | read-only | current | Indicates if a LTM was forwarded by the responding MP, as returned in the 'FwdYes' flag of the flags field. |
| 1.3.6.1.4.1.2272.1.69.32.1.10 | ColumnrcCfmLtrTerminalMep | read-only | current | A boolean value stating whether the forwarded LTM reached a MEP enclosing its MA, as returned in the Terminal MEP flag of the Flags field. |
| 1.3.6.1.4.1.2272.1.69.32.1.11 | ColumnrcCfmLtrLastEgressIdentifier | read-only | current | An octet field holding the Last Egress Identifier returned in the LTR Egress Identifier TLV of the LTR. The Last Egress Identifier identifies the MEP Linktrace… |
| 1.3.6.1.4.1.2272.1.69.32.1.12 | ColumnrcCfmLtrNextEgressIdentifier | read-only | current | An octet field holding the Next Egress Identifier returned in the LTR Egress Identifier TLV of the LTR. The Next Egress Identifier Identifies the Linktrace Res… |
| 1.3.6.1.4.1.2272.1.69.32.1.13 | ColumnrcCfmLtrRelayAction | read-only | current | Value returned in the Relay Action field. |
| 1.3.6.1.4.1.2272.1.69.32.1.14 | ColumnrcCfmLtrSrcMac | read-only | current | Mac address of the MP that respond to the LTM request for this LTR |
| 1.3.6.1.4.1.2272.1.69.32.1.15 | ColumnrcCfmLtrIngressAction | read-only | current | The value returned in the Ingress Action Field of the LTM. The value ingNoTlv(5) indicates that no Reply Ingress TLV was returned in the LTM. |
| 1.3.6.1.4.1.2272.1.69.32.1.16 | ColumnrcCfmLtrIngressMac | read-only | current | Mac address returned in the ingress MAC address field. If the rcCfmLtrIngress object contains the value ingNoTlv(5), then the contents of this object are meani… |
| 1.3.6.1.4.1.2272.1.69.32.1.17 | ColumnrcCfmLtrIngressPortIdSubtype | read-only | current | Format of the Ingress Port ID. If the rcCfmLtrIngress object contains the value ingNoTlv(5), then the contents of this object are meaningless. |
| 1.3.6.1.4.1.2272.1.69.32.1.18 | ColumnrcCfmLtrIngressPortId | read-only | current | Ingress Port ID. The format of this object is determined by the value of the rcCfmLtrIngressPortIdSubtype object. If the rcCfmLtrIngress object contains the va… |
| 1.3.6.1.4.1.2272.1.69.32.1.19 | ColumnrcCfmLtrEgressAction | read-only | current | The value returned in the Egress Action Field of the LTM. The value egrNoTlv(5) indicates that no Reply Egress TLV was returned in the LTM. |
| 1.3.6.1.4.1.2272.1.69.32.1.20 | ColumnrcCfmLtrEgressMac | read-only | current | Mac address returned in the egress MAC address field. If the rcCfmLtrEgress object contains the value egrNoTlv(5), then the contents of this object are meaning… |
| 1.3.6.1.4.1.2272.1.69.32.1.21 | ColumnrcCfmLtrEgressPortIdSubtype | read-only | current | Format of the Egress Port ID. If the rcCfmLtrEgress object contains the value egrNoTlv(5), then the contents of this object are meaningless. |
| 1.3.6.1.4.1.2272.1.69.32.1.22 | ColumnrcCfmLtrEgressPortId | read-only | current | Egress Port ID. The format of this object is determined by the value of the rcCfmLtrEgressPortIdSubtype object. If the rcCfmLtrEgress object contains the value… |
| 1.3.6.1.4.1.2272.1.69.33 | TablercCfmLtrReplyTable | not-accessible | current | This table contains a list of Linktrace replies received by a specific MEP in response to a linktrace message. |
| 1.3.6.1.4.1.2272.1.69.33.1 | RowrcCfmLtrReplyEntry | not-accessible | current | The Linktrace Reply table entry. |
| 1.3.6.1.4.1.2272.1.69.33.1.1 | ColumnrcCfmLtrReplyDomainIndex | not-accessible | current | Maintenance Domain Index |
| 1.3.6.1.4.1.2272.1.69.33.1.2 | ColumnrcCfmLtrReplyAssociationIndex | not-accessible | current | Maintenance Association Index |
| 1.3.6.1.4.1.2272.1.69.33.1.3 | ColumnrcCfmLtrReplyMepId | not-accessible | current | Maintenance EndPoint ID |
| 1.3.6.1.4.1.2272.1.69.33.1.4 | ColumnrcCfmLtrReplySeqNumber | not-accessible | current | The transaction identifier/sequence number returned by a previous transmit linktrace message command, indicating which LTM's response is going to be returned. |
| 1.3.6.1.4.1.2272.1.69.33.1.5 | ColumnrcCfmLtrReplyHop | not-accessible | current | The number of hops away from LTM initiator |
| 1.3.6.1.4.1.2272.1.69.33.1.6 | ColumnrcCfmLtrReplyReceiveOrder | not-accessible | current | An index to distinguish among multiple LTRs with the same LTR Transaction Identifier field value. This value is assigned sequentially from 1, in the order that… |
| 1.3.6.1.4.1.2272.1.69.33.1.7 | ColumnrcCfmLtrReplyTtl | read-only | current | Ttl field value for a returned LTR. |
| 1.3.6.1.4.1.2272.1.69.33.1.8 | ColumnrcCfmLtrReplyDomainName | read-only | current | Maintenance Domain Name |
| 1.3.6.1.4.1.2272.1.69.33.1.9 | ColumnrcCfmLtrReplyAssociationName | read-only | current | Maintenance Association Name |
| 1.3.6.1.4.1.2272.1.69.33.1.10 | ColumnrcCfmLtrReplyForwarded | read-only | current | Indicates if a LTM was forwarded by the responding MP, as returned in the 'FwdYes' flag of the flags field. |
| 1.3.6.1.4.1.2272.1.69.33.1.11 | ColumnrcCfmLtrReplyTerminalMep | read-only | current | A boolean value stating whether the forwarded LTM reached a MEP enclosing its MA, as returned in the Terminal MEP flag of the Flags field. |
| 1.3.6.1.4.1.2272.1.69.33.1.12 | ColumnrcCfmLtrReplyLastEgressIdentifier | read-only | current | An octet field holding the Last Egress Identifier returned in the LTR Egress Identifier TLV of the LTR. The Last Egress Identifier identifies the MEP Linktrace… |
| 1.3.6.1.4.1.2272.1.69.33.1.13 | ColumnrcCfmLtrReplyNextEgressIdentifier | read-only | current | An octet field holding the Next Egress Identifier returned in the LTR Egress Identifier TLV of the LTR. The Next Egress Identifier Identifies the Linktrace Res… |
| 1.3.6.1.4.1.2272.1.69.33.1.14 | ColumnrcCfmLtrReplyRelayAction | read-only | current | Value returned in the Relay Action field. |
| 1.3.6.1.4.1.2272.1.69.33.1.15 | ColumnrcCfmLtrReplySrcMac | read-only | current | Mac address of the MP that respond to the LTM request for this LTR |
| 1.3.6.1.4.1.2272.1.69.33.1.16 | ColumnrcCfmLtrReplyIngressAction | read-only | current | The value returned in the Ingress Action Field of the LTM. The value ingNoTlv(5) indicates that no Reply Ingress TLV was returned in the LTM. |
| 1.3.6.1.4.1.2272.1.69.33.1.17 | ColumnrcCfmLtrReplyIngressMac | read-only | current | Mac address returned in the ingress MAC address field. If the rcCfmLtrReplyIngress object contains the value ingNoTlv(5), then the contents of this object are … |
| 1.3.6.1.4.1.2272.1.69.33.1.18 | ColumnrcCfmLtrReplyIngressPortIdSubtype | read-only | current | Format of the Ingress Port ID. If the rcCfmLtrReplyIngress object contains the value ingNoTlv(5), then the contents of this object are meaningless. |
| 1.3.6.1.4.1.2272.1.69.33.1.19 | ColumnrcCfmLtrReplyIngressPortId | read-only | current | Ingress Port ID. The format of this object is determined by the value of the rcCfmLtrReplyIngressPortIdSubtype object. If the rcCfmLtrReplyIngress object conta… |
| 1.3.6.1.4.1.2272.1.69.33.1.20 | ColumnrcCfmLtrReplyEgressAction | read-only | current | The value returned in the Egress Action Field of the LTM. The value egrNoTlv(5) indicates that no Reply Egress TLV was returned in the LTM. |
| 1.3.6.1.4.1.2272.1.69.33.1.21 | ColumnrcCfmLtrReplyEgressMac | read-only | current | Mac address returned in the egress MAC address field. If the rcCfmLtrReplyEgress object contains the value egrNoTlv(5), then the contents of this object are me… |
| 1.3.6.1.4.1.2272.1.69.33.1.22 | ColumnrcCfmLtrReplyEgressPortIdSubtype | read-only | current | Format of the Egress Port ID. If the rcCfmLtrReplyEgress object contains the value egrNoTlv(5), then the contents of this object are meaningless. |
| 1.3.6.1.4.1.2272.1.69.33.1.23 | ColumnrcCfmLtrReplyEgressPortId | read-only | current | Egress Port ID. The format of this object is determined by the value of the rcCfmLtrReplyEgressPortIdSubtype object. If the rcCfmLtrReplyEgress object contains… |
| 1.3.6.1.4.1.2272.1.69.34 | TablercCfmTransmitL2PingTable | not-accessible | current | Connectivity Fault Management transmit L2Ping table |
| 1.3.6.1.4.1.2272.1.69.34.1 | RowrcCfmTransmitL2PingEntry | not-accessible | current | Connectivity Fault Management Maintenance EndPoint L2Ping entry. |
| 1.3.6.1.4.1.2272.1.69.34.1.1 | ColumnrcCfmTransmitL2PingVlanId | not-accessible | current | A value that uniquely identifies the Customer Vlan |
| 1.3.6.1.4.1.2272.1.69.34.1.2 | ColumnrcCfmTransmitL2PingDestMacAddress | read-write | current | An indication of the target MAC Address field to be transmitted |
| 1.3.6.1.4.1.2272.1.69.34.1.3 | ColumnrcCfmTransmitL2PingHostName | read-write | current | The target host name |
| 1.3.6.1.4.1.2272.1.69.34.1.4 | ColumnrcCfmTransmitL2PingDestIsHostName | read-write | current | True indicates that the host name is used for L2Ping transmission |
| 1.3.6.1.4.1.2272.1.69.34.1.5 | ColumnrcCfmTransmitL2PingMessages | read-write | current | The number of L2Ping messages to be transmitted. |
| 1.3.6.1.4.1.2272.1.69.34.1.6 | ColumnrcCfmTransmitL2PingPriority | read-write | current | Priority. 3 bit value to be used in the VLAN hdr, if present in the transmitted frame. |
| 1.3.6.1.4.1.2272.1.69.34.1.7 | ColumnrcCfmTransmitL2PingTimeoutInt | read-write | current | The interval to wait for an L2Ping time-out with a range of (1..10) seconds with a default value of 3 seconds. |
| 1.3.6.1.4.1.2272.1.69.34.1.8 | ColumnrcCfmTransmitL2PingTestPattern | read-write | current | The test pattern to use in the L2Ping PDU with range of values namely allZero, allZeroCrc, pseudoRandomBitSequence and pseudoRandomBitSequenceCrc and with a de… |
| 1.3.6.1.4.1.2272.1.69.34.1.9 | ColumnrcCfmTransmitL2PingDataSize | read-write | current | An arbitrary amount of data to be included in the data TLV, if the Data Size is selected to be sent. |
| 1.3.6.1.4.1.2272.1.69.34.1.10 | ColumnrcCfmTransmitL2PingFrameSize | read-write | current | If the frame size is specified then the data size shall be internally calculated and the calculated data size shall be included in the data TLV. |
| 1.3.6.1.4.1.2272.1.69.34.1.11 | ColumnrcCfmTransmitL2PingSourceMode | read-write | current | Source modes of the transmit loopback service. |
| 1.3.6.1.4.1.2272.1.69.34.1.12 | ColumnrcCfmTransmitL2PingSeqNumber | read-only | current | The transaction identifier/sequence number of the first loopback message (to be) sent. |
| 1.3.6.1.4.1.2272.1.69.34.1.13 | ColumnrcCfmTransmitL2PingResultOk | read-only | current | Indicates the result of the operation: -true. The L2Ping Message(s) will be (or have been) sent. -false. The L2Ping Message(s) will not be sent. |
| 1.3.6.1.4.1.2272.1.69.34.1.14 | ColumnrcCfmTransmitL2PingStatus | read-write | current | Status of the transmit loopback service: -ready. The service is available. -transmit. The service is transmitting, or about to transmit, the L2Ping messages. -… |
| 1.3.6.1.4.1.2272.1.69.34.1.15 | ColumnrcCfmTransmitL2PingResult | read-only | current | Display the L2Ping result. |
| 1.3.6.1.4.1.2272.1.69.35 | TablercCfmTransmitL2TraceTable | not-accessible | current | Connectivity Fault Management transmit L2Trace table |
| 1.3.6.1.4.1.2272.1.69.35.1 | RowrcCfmTransmitL2TraceEntry | not-accessible | current | Connectivity Fault Management Maintenance EndPoint L2Trace entry. |
| 1.3.6.1.4.1.2272.1.69.35.1.1 | ColumnrcCfmTransmitL2TraceVlanId | not-accessible | current | A value that uniquely identifies the Customer Vlan |
| 1.3.6.1.4.1.2272.1.69.35.1.2 | ColumnrcCfmTransmitL2TracePriority | read-write | current | Priority. 3 bit value to be used in the VLAN hdr, if present in the transmitted frame. |
| 1.3.6.1.4.1.2272.1.69.35.1.3 | ColumnrcCfmTransmitL2TraceDestMacAddress | read-write | current | An indication of the target MAC Address field to be transmitted |
| 1.3.6.1.4.1.2272.1.69.35.1.4 | ColumnrcCfmTransmitL2TraceHostName | read-write | current | The target host name |
| 1.3.6.1.4.1.2272.1.69.35.1.5 | ColumnrcCfmTransmitL2TraceIsid | read-write | current | Isid Id |
| 1.3.6.1.4.1.2272.1.69.35.1.6 | ColumnrcCfmTransmitL2TraceNickName | read-only | current | Local Node nick name |
| 1.3.6.1.4.1.2272.1.69.35.1.7 | ColumnrcCfmTransmitL2TraceDestIsHostName | read-write | current | True indicates that the host name is used for L2Trace transmission |
| 1.3.6.1.4.1.2272.1.69.35.1.8 | ColumnrcCfmTransmitL2TraceIsidTree | read-write | current | True indicates that the multicast tree will be traced. False indicates that the unicast path will be traced |
| 1.3.6.1.4.1.2272.1.69.35.1.9 | ColumnrcCfmTransmitL2TraceTtl | read-write | current | The number of hops remaining to this L2Trace. Decremented by 1 by each Bridge that handles the L2Trace. The decremented value is returned in the L2Trace. If 0 … |
| 1.3.6.1.4.1.2272.1.69.35.1.10 | ColumnrcCfmTransmitL2TraceSourceMode | read-write | current | Source modes of the transmit loopback service. |
| 1.3.6.1.4.1.2272.1.69.35.1.11 | ColumnrcCfmTransmitL2TraceSeqNumber | read-only | current | The transaction identifier/sequence number of the first loopback message (to be) sent. |
| 1.3.6.1.4.1.2272.1.69.35.1.12 | ColumnrcCfmTransmitL2TraceResultOk | read-only | current | Indicates the result of the operation: -true. The L2Trace Message(s) will be (or have been) sent. -false. The L2Trace Message(s) will not be sent. |
| 1.3.6.1.4.1.2272.1.69.35.1.13 | ColumnrcCfmTransmitL2TraceStatus | read-write | current | Status of the transmit loopback service: -ready. The service is available. -transmit. The service is transmitting, or about to transmit, the L2Trace messages. … |
| 1.3.6.1.4.1.2272.1.69.35.1.14 | ColumnrcCfmTransmitL2TraceFlag | read-only | current | L2Trace result flag indicating L2Trace status or error code. Each enum value represents a status or error case. 1 - No error 2 - L2Trace Internal Error 3 - Inv… |
| 1.3.6.1.4.1.2272.1.69.36 | TablercCfmL2TraceReplyTable | not-accessible | current | This table contains a list of l2trace replies received by a specific MEP in response to a linktrace message. |
| 1.3.6.1.4.1.2272.1.69.36.1 | RowrcCfmL2TraceReplyEntry | not-accessible | current | The Linktrace Reply table entry. |
| 1.3.6.1.4.1.2272.1.69.36.1.1 | ColumnrcCfmL2TraceReplyVlanId | not-accessible | current | A value that uniquely identifies the Customer Vlan |
| 1.3.6.1.4.1.2272.1.69.36.1.2 | ColumnrcCfmL2TraceReplySeqNumber | not-accessible | current | The transaction identifier/sequence number returned by a previous transmit linktrace message command, indicating which L2Trace's response is going to be return… |
| 1.3.6.1.4.1.2272.1.69.36.1.3 | ColumnrcCfmL2TraceReplyHop | not-accessible | current | The number of hops away from L2Trace initiator. |
| 1.3.6.1.4.1.2272.1.69.36.1.4 | ColumnrcCfmL2TraceReplyReceiveOrder | not-accessible | current | An index to distinguish among multiple L2Trace responses with the same Transaction Identifier field value. This value is assigned sequentially from 1, in the o… |
| 1.3.6.1.4.1.2272.1.69.36.1.5 | ColumnrcCfmL2TraceReplyTtl | read-only | current | Ttl field value for a returned L2Trace response. |
| 1.3.6.1.4.1.2272.1.69.36.1.6 | ColumnrcCfmL2TraceReplySrcMac | read-only | current | Mac address of the MP that respond to the L2Trace request for this L2traceReply |
| 1.3.6.1.4.1.2272.1.69.36.1.7 | ColumnrcCfmL2TraceReplyHostName | read-only | current | The host name of the replying node |
| 1.3.6.1.4.1.2272.1.69.36.1.8 | ColumnrcCfmL2TraceReplyLastSrcMac | read-only | current | The MAC address of the node that forwarded the L2Trace to the responding node |
| 1.3.6.1.4.1.2272.1.69.36.1.9 | ColumnrcCfmL2TraceReplyLastHostName | read-only | current | The host name of the node that forwarded the L2Trace to the responding node |
| 1.3.6.1.4.1.2272.1.69.37 | TablercCfmTransmitL2IpPingTable | not-accessible | current | Connectivity Fault Management transmit L2IpPing table |
| 1.3.6.1.4.1.2272.1.69.37.1 | RowrcCfmTransmitL2IpPingEntry | not-accessible | current | L2IpPing entry. |
| 1.3.6.1.4.1.2272.1.69.37.1.1 | ColumnrcCfmTransmitL2IpPingIpAddrType | not-accessible | current | The address type of destination IP Address |
| 1.3.6.1.4.1.2272.1.69.37.1.2 | ColumnrcCfmTransmitL2IpPingIpAddr | not-accessible | current | Destination IP Address. Support ipv4 at this time |
| 1.3.6.1.4.1.2272.1.69.37.1.3 | ColumnrcCfmTransmitL2IpPingVrfId | read-only | current | VRF ID |
| 1.3.6.1.4.1.2272.1.69.37.1.4 | ColumnrcCfmTransmitL2IpPingVrfName | read-only | current | The Name of the Virtual Router |
| 1.3.6.1.4.1.2272.1.69.37.1.5 | ColumnrcCfmTransmitL2IpPingMessages | read-create | current | The number of L2IpPing messages to be transmitted per mac/vlan pair. |
| 1.3.6.1.4.1.2272.1.69.37.1.6 | ColumnrcCfmTransmitL2IpPingTimeoutInt | read-create | current | The interval to wait for an L2IpPing time-out with a range of (1..10) seconds with a default value of 3 seconds. |
| 1.3.6.1.4.1.2272.1.69.37.1.7 | ColumnrcCfmTransmitL2IpPingTestPattern | read-create | current | The test pattern to use in the L2IpPing PDUs with range of values namely allZero, allZeroCrc, pseudoRandomBitSequence and pseudoRandomBitSequenceCrc and with a… |
| 1.3.6.1.4.1.2272.1.69.37.1.8 | ColumnrcCfmTransmitL2IpPingDataSize | read-create | current | An arbitrary amount of data to be included in the data TLV, if the Data Size is selected to be sent. |
| 1.3.6.1.4.1.2272.1.69.37.1.9 | ColumnrcCfmTransmitL2IpPingStatus | read-create | current | Status of the transmit loopback service: -ready. The service is available. -transmit. The service is transmitting, or about to transmit, the L2IpPing messages.… |
| 1.3.6.1.4.1.2272.1.69.37.1.10 | ColumnrcCfmTransmitL2IpPingResultOk | read-only | current | Indicates the result of the operation: -true. L2IpPing Message(s) will be/have been sent. -false. L2IpPing Message(s) will not be sent. |
| 1.3.6.1.4.1.2272.1.69.37.1.11 | ColumnrcCfmTransmitL2IpPingPathsFound | read-only | current | The number of paths found to execute l2ping command |
| 1.3.6.1.4.1.2272.1.69.37.1.12 | ColumnrcCfmTransmitL2IpPingRowStatus | read-create | current | Used to create/delete entries in the rcCfmTransmitL2IpPingTable. Deletion of an entry in this table results in corresponding rcCfmL2IpPingReplyTable entries be… |
| 1.3.6.1.4.1.2272.1.69.38 | TablercCfmL2IpPingReplyTable | not-accessible | current | This table contains a list of l2 ip ping replies received |
| 1.3.6.1.4.1.2272.1.69.38.1 | RowrcCfmL2IpPingReplyEntry | not-accessible | current | The L2 Ip Ping Reply table entry. |
| 1.3.6.1.4.1.2272.1.69.38.1.1 | ColumnrcCfmL2IpPingReplyIpAddrType | not-accessible | current | The address type of destination IP Address |
| 1.3.6.1.4.1.2272.1.69.38.1.2 | ColumnrcCfmL2IpPingReplyIpAddr | not-accessible | current | Destination IP Address. Support ipv4 at this time |
| 1.3.6.1.4.1.2272.1.69.38.1.3 | ColumnrcCfmL2IpPingReplySendOrder | not-accessible | current | An index to distinguish among multiple L2Ping sessions This value is assigned sequentially from 1. It denotes order that sessions were sent. It correlates to t… |
| 1.3.6.1.4.1.2272.1.69.38.1.4 | ColumnrcCfmL2IpPingReplyVrfId | read-only | current | VRF ID |
| 1.3.6.1.4.1.2272.1.69.38.1.5 | ColumnrcCfmL2IpPingReplyVlanId | read-only | current | Vlan found from L3 lookup and used for transmission |
| 1.3.6.1.4.1.2272.1.69.38.1.6 | ColumnrcCfmL2IpPingReplyDestMacAddress | read-only | current | An indication of the target MAC Address transmitted |
| 1.3.6.1.4.1.2272.1.69.38.1.7 | ColumnrcCfmL2IpPingReplyPortNum | read-only | current | Either the value '0', or the port number of the port used for the l2ping. |
| 1.3.6.1.4.1.2272.1.69.38.1.8 | ColumnrcCfmL2IpPingReplyDestHostName | read-only | current | The host name of the responding node |
| 1.3.6.1.4.1.2272.1.69.38.1.9 | ColumnrcCfmL2IpPingReplySize | read-only | current | The number of bytes of data sent |
| 1.3.6.1.4.1.2272.1.69.38.1.10 | ColumnrcCfmL2IpPingReplyPktsTx | read-only | current | Number of Packets transmitted for this vlan/mac |
| 1.3.6.1.4.1.2272.1.69.38.1.11 | ColumnrcCfmL2IpPingReplyPktsRx | read-only | current | Number of Packets received for this vlan/mac |
| 1.3.6.1.4.1.2272.1.69.38.1.12 | ColumnrcCfmL2IpPingReplyPercentLossWhole | read-only | current | Percentage of packet loss for this vlan/mac |
| 1.3.6.1.4.1.2272.1.69.38.1.13 | ColumnrcCfmL2IpPingReplyPercentLossFract | read-only | current | Percentage of packet loss for this vlan/mac |
| 1.3.6.1.4.1.2272.1.69.38.1.14 | ColumnrcCfmL2IpPingReplyMinRoundTrip | read-only | current | Min time for round-trip for this vlan/mac in us |
| 1.3.6.1.4.1.2272.1.69.38.1.15 | ColumnrcCfmL2IpPingReplyMaxRoundTrip | read-only | current | Max time for round-trip for this vlan/mac in us |
| 1.3.6.1.4.1.2272.1.69.38.1.16 | ColumnrcCfmL2IpPingReplyRttAvgWhole | read-only | current | Average time for round-trip for this vlan/mac in us |
| 1.3.6.1.4.1.2272.1.69.38.1.17 | ColumnrcCfmL2IpPingReplyRttAvgFract | read-only | current | Fractional portion of Average time for round-trip |
| 1.3.6.1.4.1.2272.1.69.38.1.18 | ColumnrcCfmL2IpPingReplyFlag | read-only | current | Result flag indicating status or error code. Each enum value represents a status or error case. 1 - No error 2 - Internal Error 3 - Invalid Ip 4 - L2Trace comp… |
| 1.3.6.1.4.1.2272.1.69.39 | TablercCfmTransmitL2IpTraceTable | not-accessible | current | Connectivity Fault Management transmit L2IpTrace table |
| 1.3.6.1.4.1.2272.1.69.39.1 | RowrcCfmTransmitL2IpTraceEntry | not-accessible | current | L2IpTrace entry. |
| 1.3.6.1.4.1.2272.1.69.39.1.1 | ColumnrcCfmTransmitL2IpTraceIpAddrType | not-accessible | current | The address type of destination IP Address |
| 1.3.6.1.4.1.2272.1.69.39.1.2 | ColumnrcCfmTransmitL2IpTraceIpAddr | not-accessible | current | Destination IP Address. Support ipv4 at this time |
| 1.3.6.1.4.1.2272.1.69.39.1.3 | ColumnrcCfmTransmitL2IpTraceVrfId | read-only | current | VRF ID |
| 1.3.6.1.4.1.2272.1.69.39.1.4 | ColumnrcCfmTransmitL2IpTraceVrfName | read-only | current | The Name of the Virtual Router |
| 1.3.6.1.4.1.2272.1.69.39.1.5 | ColumnrcCfmTransmitL2IpTraceTtl | read-create | current | The number of hops remaining to this L2Trace. Decremented by 1 by each Bridge that handles the L2Trace. The decremented value is returned in the L2Trace. If 0 … |
| 1.3.6.1.4.1.2272.1.69.39.1.6 | ColumnrcCfmTransmitL2IpTraceStatus | read-create | current | Status of the transmit loopback service: -ready. The service is available. -transmit. The service is transmitting, or about to transmit, the L2Trace messages. … |
| 1.3.6.1.4.1.2272.1.69.39.1.7 | ColumnrcCfmTransmitL2IpTraceResultOk | read-only | current | Indicates the result of the operation: -true. The Trace Message(s) will be/have been sent. -false. The Trace Message(s) will not be sent. |
| 1.3.6.1.4.1.2272.1.69.39.1.8 | ColumnrcCfmTransmitL2IpTracePathsFound | read-only | current | The number of paths found to execute l2trace command |
| 1.3.6.1.4.1.2272.1.69.39.1.9 | ColumnrcCfmTransmitL2IpTraceRowStatus | read-create | current | Used to create/delete entries in the rcCfmTransmitL2IpTraceTable. Deletion of an entry in this table results in corresponding rcCfmL2IpTraceReplyTable entries … |
| 1.3.6.1.4.1.2272.1.69.40 | TablercCfmL2IpTraceReplyTable | not-accessible | current | This table contains a list of l2 ip trace replies received by a specific MEP in response to a linktrace message. |
| 1.3.6.1.4.1.2272.1.69.40.1 | RowrcCfmL2IpTraceReplyEntry | not-accessible | current | The L2 Ip Trace Reply table entry. |
| 1.3.6.1.4.1.2272.1.69.40.1.1 | ColumnrcCfmL2IpTraceReplyIpAddrType | not-accessible | current | The address type of destination IP Address |
| 1.3.6.1.4.1.2272.1.69.40.1.2 | ColumnrcCfmL2IpTraceReplyIpAddr | not-accessible | current | Destination IP Address. Support ipv4 at this time |
| 1.3.6.1.4.1.2272.1.69.40.1.3 | ColumnrcCfmL2IpTraceReplySendOrder | not-accessible | current | An index to distinguish among multiple L2Trace sessions This value is assigned sequentially from 1. It denotes order that sessions were sent. It correlates to … |
| 1.3.6.1.4.1.2272.1.69.40.1.4 | ColumnrcCfmL2IpTraceReplyHop | not-accessible | current | The number of L2 hops away from L2Trace initiator. |
| 1.3.6.1.4.1.2272.1.69.40.1.5 | ColumnrcCfmL2IpTraceReplyReceiveOrder | not-accessible | current | An index to distinguish among multiple L2Trace responses with the same Send Transaction Identifier field value. This value is assigned sequentially from 1, in … |
| 1.3.6.1.4.1.2272.1.69.40.1.6 | ColumnrcCfmL2IpTraceReplyTtl | read-only | current | Ttl field value for a returned L2Trace response. |
| 1.3.6.1.4.1.2272.1.69.40.1.7 | ColumnrcCfmL2IpTraceReplyVrfId | read-only | current | VRF ID |
| 1.3.6.1.4.1.2272.1.69.40.1.8 | ColumnrcCfmL2IpTraceReplyVlanId | read-only | current | Vlan found from L3 lookup and used for transmission |
| 1.3.6.1.4.1.2272.1.69.40.1.9 | ColumnrcCfmL2IpTraceReplyDestMacAddress | read-only | current | An indication of the target MAC Address transmitted |
| 1.3.6.1.4.1.2272.1.69.40.1.10 | ColumnrcCfmL2IpTraceReplySeqNumber | read-only | current | The transaction identifier/sequence number used in linktrace message packet |
| 1.3.6.1.4.1.2272.1.69.40.1.11 | ColumnrcCfmL2IpTraceReplyPortNum | read-only | current | Either the value '0', or the port number of the port used for the l2trace. |
| 1.3.6.1.4.1.2272.1.69.40.1.12 | ColumnrcCfmL2IpTraceReplySrcMac | read-only | current | Mac address of the MP that responded to L2Trace request for this L2traceReply |
| 1.3.6.1.4.1.2272.1.69.40.1.13 | ColumnrcCfmL2IpTraceReplyHostName | read-only | current | The host name of the replying node |
| 1.3.6.1.4.1.2272.1.69.40.1.14 | ColumnrcCfmL2IpTraceReplyLastSrcMac | read-only | current | The MAC address of the node that forwarded the L2Trace to the responding node |
| 1.3.6.1.4.1.2272.1.69.40.1.15 | ColumnrcCfmL2IpTraceReplyLastHostName | read-only | current | The host name of the node that forwarded the L2Trace to the responding node |
| 1.3.6.1.4.1.2272.1.69.40.1.16 | ColumnrcCfmL2IpTraceReplyFlag | read-only | current | L2Trace result flag indicating status or error code. Each enum value represents a status or error case. 1 - No error 2 - L2Trace Internal Error 3 - Invalid Mac… |
| 1.3.6.1.4.1.2272.1.69.41 | TablercCfmTransmitL2McastTraceTable | not-accessible | current | This table contains a list of l2 multicast route trace requests. |
| 1.3.6.1.4.1.2272.1.69.41.1 | RowrcCfmTransmitL2McastTraceEntry | not-accessible | current | CFM Transmit L2 Multicast Trace Entry. |
| 1.3.6.1.4.1.2272.1.69.41.1.1 | ColumnrcCfmTransmitL2McastTraceSrcIpAddrType | not-accessible | current | The address type of Source IP Address |
| 1.3.6.1.4.1.2272.1.69.41.1.2 | ColumnrcCfmTransmitL2McastTraceSrcIpAddr | not-accessible | current | Source IP Address. Support ipv4 at this time |
| 1.3.6.1.4.1.2272.1.69.41.1.3 | ColumnrcCfmTransmitL2McastTraceGroupIpAddrType | not-accessible | current | The address type of Multicast Group IP Address |
| 1.3.6.1.4.1.2272.1.69.41.1.4 | ColumnrcCfmTransmitL2McastTraceGroupIpAddr | not-accessible | current | Multicast Group IP Address. Support ipv4 at this time |
| 1.3.6.1.4.1.2272.1.69.41.1.5 | ColumnrcCfmTransmitL2McastTraceServiceType | not-accessible | current | Service type indicates what value of service id means. vlan - indicates value maps to VLAN vrfid - indicates value maps to a VRF Id |
| 1.3.6.1.4.1.2272.1.69.41.1.6 | ColumnrcCfmTransmitL2McastTraceServiceId | not-accessible | current | Value of VLAN or VRF-Id. Meaning controlled by rcCfmTransmitL2McastTraceServiceType. Value must be valid for type (e.g. VLAN range 1..4094) |
| 1.3.6.1.4.1.2272.1.69.41.1.7 | ColumnrcCfmTransmitL2McastTraceVrfName | read-only | current | The name of the Virtual Router of the originator |
| 1.3.6.1.4.1.2272.1.69.41.1.8 | ColumnrcCfmTransmitL2McastTraceRowStatus | read-create | current | Used to create/delete entries in the rcCfmTransmitL2McastTraceTable. Deletion of an entry in this table results in a corresponding rcCfmL2McastTraceReplyTable … |
| 1.3.6.1.4.1.2272.1.69.41.1.9 | ColumnrcCfmTransmitL2McastTracePriority | read-create | current | Priority. 3 bit value to be used in the VLAN hdr, if present in the transmitted frame. |
| 1.3.6.1.4.1.2272.1.69.41.1.10 | ColumnrcCfmTransmitL2McastTraceTtl | read-create | current | The number of hops remaining to this trace. Decremented by 1 by each Bridge that handles trace. If 0 on output, the trace is not transmitted to the next hop. T… |
| 1.3.6.1.4.1.2272.1.69.41.1.11 | ColumnrcCfmTransmitL2McastTraceSeqNumber | read-only | current | The transaction identifier/sequence number of the first message (to be) sent. |
| 1.3.6.1.4.1.2272.1.69.41.1.12 | ColumnrcCfmTransmitL2McastTraceStatus | read-create | current | Status of the transmit loopback service: -ready. The service is available. -transmit. The service is transmitting, or about to transmit the trace messages. -ab… |
| 1.3.6.1.4.1.2272.1.69.41.1.13 | ColumnrcCfmTransmitL2McastTraceResultOk | read-only | current | Indicates the result of the operation: -true. The Trace Message(s) will/have been sent. -false. The Trace Message(s) will not be sent. |
| 1.3.6.1.4.1.2272.1.69.41.1.14 | ColumnrcCfmTransmitL2McastTraceFlag | read-only | current | Result flag indicating L2Trace status or error code. Each enum value represents a status or error case. 1 - No error 2 - Internal Error 3 - Mep must be enabled… |
| 1.3.6.1.4.1.2272.1.69.42 | TablercCfmL2McastTraceReplyTable | not-accessible | current | This table contains a list of multicast route trace replies received by a specific MEP in response to a trace message. |
| 1.3.6.1.4.1.2272.1.69.42.1 | RowrcCfmL2McastTraceReplyEntry | not-accessible | current | The L2 Multicast Trace Reply Table Entry |
| 1.3.6.1.4.1.2272.1.69.42.1.1 | ColumnrcCfmL2McastTraceReplySrcIpAddrType | not-accessible | current | The address type of Source IP Address |
| 1.3.6.1.4.1.2272.1.69.42.1.2 | ColumnrcCfmL2McastTraceReplySrcIpAddr | not-accessible | current | Source IP Address. Support ipv4 at this time |
| 1.3.6.1.4.1.2272.1.69.42.1.3 | ColumnrcCfmL2McastTraceReplyGroupIpAddrType | not-accessible | current | The address type of Multicast Group IP Address |
| 1.3.6.1.4.1.2272.1.69.42.1.4 | ColumnrcCfmL2McastTraceReplyGroupIpAddr | not-accessible | current | Multicast Group IP Address. Support ipv4 at this time |
| 1.3.6.1.4.1.2272.1.69.42.1.5 | ColumnrcCfmL2McastTraceReplyServiceType | not-accessible | current | Service type indicates what value of service id means. vlan - indicates value maps to VLAN vrfid - indicates value maps to a VRF Id |
| 1.3.6.1.4.1.2272.1.69.42.1.6 | ColumnrcCfmL2McastTraceReplyServiceId | not-accessible | current | Value of VLAN or VRF-Id. Meaning controlled by rcCfmL2McastTraceReplyServiceType. Value must be valid for type (e.g. VLAN range 1..4094) |
| 1.3.6.1.4.1.2272.1.69.42.1.7 | ColumnrcCfmL2McastTraceReplyHop | not-accessible | current | The number of hops away from trace initiator |
| 1.3.6.1.4.1.2272.1.69.42.1.8 | ColumnrcCfmL2McastTraceReplyReceiveOrder | not-accessible | current | An index to distinguish among multiple responses with the same Transaction Identifier field value. This value is assigned sequentially from 1, in the order tha… |
| 1.3.6.1.4.1.2272.1.69.42.1.9 | ColumnrcCfmL2McastTraceReplyTtl | read-only | current | Ttl field value for a returned trace response. |
| 1.3.6.1.4.1.2272.1.69.42.1.10 | ColumnrcCfmL2McastTraceReplyVrfName | read-only | current | The name of the Virtual Router of the originator |
| 1.3.6.1.4.1.2272.1.69.42.1.11 | ColumnrcCfmL2McastTraceReplySrcMac | read-only | current | Mac address of the MP that respond to the trace request |
| 1.3.6.1.4.1.2272.1.69.42.1.12 | ColumnrcCfmL2McastTraceReplyHostName | read-only | current | The host name of the replying node |
| 1.3.6.1.4.1.2272.1.69.42.1.13 | ColumnrcCfmL2McastTraceReplyLastSrcMac | read-only | current | The MAC address of the node that forwarded the trace to the responding node |
| 1.3.6.1.4.1.2272.1.69.42.1.14 | ColumnrcCfmL2McastTraceReplyLastHostName | read-only | current | The host name of the node that forwarded the trace to the responding node |
| 1.3.6.1.4.1.2272.1.69.42.1.15 | ColumnrcCfmL2McastTraceReplySpbmVlanId | read-only | current | The SPBM VLAN id used for the trace |
| 1.3.6.1.4.1.2272.1.69.42.1.16 | ColumnrcCfmL2McastTraceReplyBMac | read-only | current | The multicast MAC address for the group |
| 1.3.6.1.4.1.2272.1.69.42.1.17 | ColumnrcCfmL2McastTraceReplyIsid | read-only | current | Isid id for the group |
| 1.3.6.1.4.1.2272.1.70 | NodercPwe3 | |||
| 1.3.6.1.4.1.2272.1.71 | NodercPlugOptMod | |||
| 1.3.6.1.4.1.2272.1.71.1 | TablercPlugOptModTable | not-accessible | current | Gbic SFF diagnostic info table |
| 1.3.6.1.4.1.2272.1.71.1.1 | RowrcPlugOptModEntry | not-accessible | current | Entry containing info. for a particular port |
| 1.3.6.1.4.1.2272.1.71.1.1.1 | ColumnrcPlugOptModPortIndex | read-only | current | An index value that uniquely identifies a port on a blade or line-card. |
| 1.3.6.1.4.1.2272.1.71.1.1.2 | ColumnrcPlugOptModDdmStatusMask | read-only | current | Each bit other than ddm-ok represents a specific error. Any combination of error bits is allowed. |
| 1.3.6.1.4.1.2272.1.71.1.1.3 | ColumnrcPlugOptModCalibration | read-only | current | The identifier value indicates type of calibration. |
| 1.3.6.1.4.1.2272.1.71.1.1.4 | ColumnrcPlugOptModPowerMeasure | read-only | current | The identifier value indicates type of external power. |
| 1.3.6.1.4.1.2272.1.71.1.1.5 | ColumnrcPlugOptModConnectorType | read-only | current | The connector type is a 16 character field that contains ASCII characters, left-aligned and padded on the right with ASCII spaces. This is an assigned name tha… |
| 1.3.6.1.4.1.2272.1.71.1.1.6 | ColumnrcPlugOptModVendorName | read-only | current | The vendor name is a 16 character field that contains ASCII characters, left-aligned and padded on the right with ASCII spaces. The vendor name shall be the fu… |
| 1.3.6.1.4.1.2272.1.71.1.1.7 | ColumnrcPlugOptModVendorPartNumber | read-only | current | The vendor part number is a 16 byte field that contains ASCII characters, left-aligned and padded on the right with ASCII spaces, defining the vendor part numb… |
| 1.3.6.1.4.1.2272.1.71.1.1.8 | ColumnrcPlugOptModVendorRevNumber | read-only | current | The vendor revision number is a 4-byte field that contains ASCII characters, left-aligned and padded on the right with ASCII spaces, defining the vendor produc… |
| 1.3.6.1.4.1.2272.1.71.1.1.9 | ColumnrcPlugOptModVendorSN | read-only | current | The vendor serial number is a 16 character field that contains ASCII characters, left-aligned and padded on the right with ASCII spaces, defining the vendor se… |
| 1.3.6.1.4.1.2272.1.71.1.1.10 | ColumnrcPlugOptModVendorDateCode | read-only | current | The date code is an 8-byte field that contains the vendor's date code in ASCII. This field is mandatory and takes the form: YYMMDDLC where YY is the 2 low orde… |
| 1.3.6.1.4.1.2272.1.71.1.1.11 | ColumnrcPlugOptModPEC | read-only | current | This is a 16 byte left-justified ASCII field that records the Nortel Product Equipment Code order number for the module. Nortel part numbers are 9 bytes long, … |
| 1.3.6.1.4.1.2272.1.71.1.1.12 | ColumnrcPlugOptModCLEI | read-only | current | This is a 10 byte left-justified ASCII field that records the Nortel supplied Common Language Equipment Identifier code for the device. The CLEI code is a Telc… |
| 1.3.6.1.4.1.2272.1.71.1.1.13 | ColumnrcPlugOptModSupportsDDM | read-only | current | This boolean indicates whether or not the device supports the DDM capability. |
| 1.3.6.1.4.1.2272.1.71.1.1.14 | ColumnrcPlugOptModAux1Monitoring | read-only | current | This value tells what Aux1 is measuring.The values are as follows: 0 Auxiliary monitoring not implemented 1 APD Bias Voltage mV (units of 10 mV) 2 Reserved 3 T… |
| 1.3.6.1.4.1.2272.1.71.1.1.15 | ColumnrcPlugOptModAux2Monitoring | read-only | current | This value tells you what AUX2 is measuring.The values are as follows: 0 Auxiliary monitoring not implemented 1 APD Bias Voltage mV (units of 10 mV) 2 Reserved… |
| 1.3.6.1.4.1.2272.1.71.1.1.16 | ColumnrcPlugOptModWaveLength | read-only | current | Nominal transmitter output wavelength at room temperature. It is expressed in nano-meters. |
| 1.3.6.1.4.1.2272.1.71.1.1.17 | ColumnrcPlugOptModTemperature | read-only | current | This value represents the internally measured module temperature. It is expressed in units of 1/256 of a degree Celsius and can range from -40C to +125C with 0… |
| 1.3.6.1.4.1.2272.1.71.1.1.18 | ColumnrcPlugOptModTemperatureHighAlarmThreshold | read-only | current | This value represents the vendor specified high temperature threshold. If the device temperature exceeds this value, a temperature high is asserted. It is expr… |
| 1.3.6.1.4.1.2272.1.71.1.1.19 | ColumnrcPlugOptModTemperatureLowAlarmThreshold | read-only | current | This value represents the vendor specified low temperature threshold. If the device temperature falls below this value, a temperature low is asserted. It is ex… |
| 1.3.6.1.4.1.2272.1.71.1.1.20 | ColumnrcPlugOptModTemperatureHighWarningThreshold | read-only | current | This value represents the vendor specified high temperature warning threshold. If the device temperature exceeds this value, a temperature high warning is asse… |
| 1.3.6.1.4.1.2272.1.71.1.1.21 | ColumnrcPlugOptModTemperatureLowWarningThreshold | read-only | current | This value represents the vendor specified low temperature warning threshold. If the device temperature falls below this value, a temperature low warning is as… |
| 1.3.6.1.4.1.2272.1.71.1.1.22 | ColumnrcPlugOptModVoltage | read-only | current | This value represents the internally measured supply voltage. It is a positive number expressed in microvolts and can range from 0 to 65535 mV. |
| 1.3.6.1.4.1.2272.1.71.1.1.23 | ColumnrcPlugOptModVoltageHighAlarmThreshold | read-only | current | This value represents the vendor specified high voltage threshold. If the measured voltage exceeds this value, a high voltage is asserted. It is a positive num… |
| 1.3.6.1.4.1.2272.1.71.1.1.24 | ColumnrcPlugOptModVoltageLowAlarmThreshold | read-only | current | This value represents the vendor specified low voltage threshold. If the measured voltage falls below this value, a low voltage is asserted. It is a positive n… |
| 1.3.6.1.4.1.2272.1.71.1.1.25 | ColumnrcPlugOptModVoltageHighWarningThreshold | read-only | current | This value represents the vendor specified high voltage warning threshold. If the measured voltage exceeds this value, a high voltage warning is asserted. It i… |
| 1.3.6.1.4.1.2272.1.71.1.1.26 | ColumnrcPlugOptModVoltageLowWarningThreshold | read-only | current | This value represents the vendor specified low voltage warning threshold. If the measured voltage falls below this value, a low voltage warning is asserted. It… |
| 1.3.6.1.4.1.2272.1.71.1.1.27 | ColumnrcPlugOptModBias | read-only | current | This value represents the internally measured transmitter laser bias current. It is a positive number expressed in units of 0.1 microamp and can range from 0 t… |
| 1.3.6.1.4.1.2272.1.71.1.1.28 | ColumnrcPlugOptModBiasHighAlarmThreshold | read-only | current | This value represents the vendor specified high current threshold. If the measured bias current exceeds this value, a high current alarm is asserted. It is a p… |
| 1.3.6.1.4.1.2272.1.71.1.1.29 | ColumnrcPlugOptModBiasLowAlarmThreshold | read-only | current | This value represents the vendor specified low current threshold. If the measured bias current falls below this value, a low current is asserted. It is a posit… |
| 1.3.6.1.4.1.2272.1.71.1.1.30 | ColumnrcPlugOptModBiasHighWarningThreshold | read-only | current | This value represents the vendor specified high current warning threshold. If the measured bias current exceeds this value, a high current warning is asserted.… |
| 1.3.6.1.4.1.2272.1.71.1.1.31 | ColumnrcPlugOptModBiasLowWarningThreshold | read-only | current | This value represents the vendor specified low current warning threshold. If the measured bias current falls below this value, a low current warning is asserte… |
| 1.3.6.1.4.1.2272.1.71.1.1.32 | ColumnrcPlugOptModTxPower | read-only | current | This value represents the internally measured coupled TX output power. It is a positive number expressed in units of micro watts and can range from 0 to 65.535… |
| 1.3.6.1.4.1.2272.1.71.1.1.33 | ColumnrcPlugOptModTxPowerHighAlarmThreshold | read-only | current | This value represents the vendor specified high transmit power threshold. If the measured transmitter power exceeds this value, a transmitter power high is ass… |
| 1.3.6.1.4.1.2272.1.71.1.1.34 | ColumnrcPlugOptModTxPowerLowAlarmThreshold | read-only | current | This value represents the vendor specified low transmit power threshold. If the measured transmitter power falls below this value, a transmitter power low is a… |
| 1.3.6.1.4.1.2272.1.71.1.1.35 | ColumnrcPlugOptModTxPowerHighWarningThreshold | read-only | current | This value represents the vendor specified high transmit power warning threshold. If the measured transmitter power exceeds this value, a transmitter power hig… |
| 1.3.6.1.4.1.2272.1.71.1.1.36 | ColumnrcPlugOptModTxPowerLowWarningThreshold | read-only | current | This value represents the vendor specified low transmit power warning threshold. If the measured transmitter power falls below this value, a transmitter power … |
| 1.3.6.1.4.1.2272.1.71.1.1.37 | ColumnrcPlugOptModRxPower | read-only | current | This value represents the internally measured received power. It is a positive number expressed in units of micro watts and can range from 0 to 65.535 mW (-40 … |
| 1.3.6.1.4.1.2272.1.71.1.1.38 | ColumnrcPlugOptModRxPowerHighAlarmThreshold | read-only | current | This value represents the vendor specified high receiver power threshold. If the measured received power exceeds this value, a receiver power high is asserted.… |
| 1.3.6.1.4.1.2272.1.71.1.1.39 | ColumnrcPlugOptModRxPowerLowAlarmThreshold | read-only | current | This value represents the vendor specified low receiver power threshold. If the measured received power falls below this value, a receiver power low is asserte… |
| 1.3.6.1.4.1.2272.1.71.1.1.40 | ColumnrcPlugOptModRxPowerHighWarningThreshold | read-only | current | This value represents the vendor specified high receiver power warning threshold. If the measured received power exceeds this value, a receiver power high warn… |
| 1.3.6.1.4.1.2272.1.71.1.1.41 | ColumnrcPlugOptModRxPowerLowWarningThreshold | read-only | current | This value represents the vendor specified low receiver power warning threshold. If the measured received power falls below this value, a receiver power low wa… |
| 1.3.6.1.4.1.2272.1.71.1.1.42 | ColumnrcPlugOptModAux1 | read-only | current | This represents the internally measured A/D value specified. |
| 1.3.6.1.4.1.2272.1.71.1.1.43 | ColumnrcPlugOptModAux1HighAlarmThreshold | read-only | current | This value represents the vendor specified high Aux1 threshold. |
| 1.3.6.1.4.1.2272.1.71.1.1.44 | ColumnrcPlugOptModAux1LowAlarmThreshold | read-only | current | This value represents the vendor specified low Aux1 threshold. |
| 1.3.6.1.4.1.2272.1.71.1.1.45 | ColumnrcPlugOptModAux1HighWarningThreshold | read-only | current | This value represents the vendor specified high Aux1 warning threshold. |
| 1.3.6.1.4.1.2272.1.71.1.1.46 | ColumnrcPlugOptModAux1LowWarningThreshold | read-only | current | This value represents the vendor specified low Aux1 warning threshold. |
| 1.3.6.1.4.1.2272.1.71.1.1.47 | ColumnrcPlugOptModAux2 | read-only | current | This represents the internally measured A/D value specified. |
| 1.3.6.1.4.1.2272.1.71.1.1.48 | ColumnrcPlugOptModAux2HighAlarmThreshold | read-only | current | This value represents the vendor specified high Aux1 threshold. |
| 1.3.6.1.4.1.2272.1.71.1.1.49 | ColumnrcPlugOptModAux2LowAlarmThreshold | read-only | current | This value represents the vendor specified low Aux1 threshold. |
| 1.3.6.1.4.1.2272.1.71.1.1.50 | ColumnrcPlugOptModAux2HighWarningThreshold | read-only | current | This value represents the vendor specified high Aux1 warning threshold. |
| 1.3.6.1.4.1.2272.1.71.1.1.51 | ColumnrcPlugOptModAux2LowWarningThreshold | read-only | current | This value represents the vendor specified low Aux1 warning threshold. |
| 1.3.6.1.4.1.2272.1.71.1.1.52 | ColumnrcPlugOptModTemperatureStatus | read-only | current | Used to indicate the current temperature status |
| 1.3.6.1.4.1.2272.1.71.1.1.53 | ColumnrcPlugOptModVoltageStatus | read-only | current | Used to indicate the current voltage status |
| 1.3.6.1.4.1.2272.1.71.1.1.54 | ColumnrcPlugOptModBiasStatus | read-only | current | Used to indicate the current laser bias status |
| 1.3.6.1.4.1.2272.1.71.1.1.55 | ColumnrcPlugOptModTxPowerStatus | read-only | current | Used to indicate the current transmitter power status |
| 1.3.6.1.4.1.2272.1.71.1.1.56 | ColumnrcPlugOptModRxPowerStatus | read-only | current | Used to indicate the current receiver power status |
| 1.3.6.1.4.1.2272.1.71.1.1.57 | ColumnrcPlugOptModAux1Status | read-only | current | Used to indicate the current Aux1 status |
| 1.3.6.1.4.1.2272.1.71.1.1.58 | ColumnrcPlugOptModAux2Status | read-only | current | Used to indicate the current Aux2 status |
| 1.3.6.1.4.1.2272.1.71.1.1.59 | ColumnrcPlugOptModQSFPTx1Bias | read-only | current | This value represents the internally measured transmitter laser bias current in channel 1 of QSFP.. It is a positive number expressed in units of 0.1 microamp … |
| 1.3.6.1.4.1.2272.1.71.1.1.60 | ColumnrcPlugOptModQSFPTx2Bias | read-only | current | This value represents the internally measured transmitter laser bias current in channel 2 of QSFP.. It is a positive number expressed in units of 0.1 microamp … |
| 1.3.6.1.4.1.2272.1.71.1.1.61 | ColumnrcPlugOptModQSFPTx3Bias | read-only | current | This value represents the internally measured transmitter laser bias current in channel 3 of QSFP.. It is a positive number expressed in units of 0.1 microamp … |
| 1.3.6.1.4.1.2272.1.71.1.1.62 | ColumnrcPlugOptModQSFPTx4Bias | read-only | current | This value represents the internally measured transmitter laser bias current in channel 4 of QSFP.. It is a positive number expressed in units of 0.1 microamps… |
| 1.3.6.1.4.1.2272.1.71.1.1.63 | ColumnrcPlugOptModQSFPTx1Power | read-only | current | This value represents the internally measured TX output power in channel 1 of QSFP. It is a positive number expressed in units of micro watts and can range fro… |
| 1.3.6.1.4.1.2272.1.71.1.1.64 | ColumnrcPlugOptModQSFPTx2Power | read-only | current | This value represents the internally measured TX output power in channel 2 of QSFP. It is a positive number expressed in units of micro watts and can range fro… |
| 1.3.6.1.4.1.2272.1.71.1.1.65 | ColumnrcPlugOptModQSFPTx3Power | read-only | current | This value represents the internally measured TX output power in channel 3 of QSFP. It is a positive number expressed in units of micro watts and can range fro… |
| 1.3.6.1.4.1.2272.1.71.1.1.66 | ColumnrcPlugOptModQSFPTx4Power | read-only | current | This value represents the internally measured TX output power in channel 4 of QSFP. It is a positive number expressed in units of micro watts and can range fro… |
| 1.3.6.1.4.1.2272.1.71.1.1.67 | ColumnrcPlugOptModQSFPRx1Power | read-only | current | This value represents the internally measured received power in channel 1 of QSFP. It is a positive number expressed in units of micro watts and can range from… |
| 1.3.6.1.4.1.2272.1.71.1.1.68 | ColumnrcPlugOptModQSFPRx2Power | read-only | current | This value represents the internally measured received power in channel 2 of QSFP. It is a positive number expressed in units of micro watts and can range from… |
| 1.3.6.1.4.1.2272.1.71.1.1.69 | ColumnrcPlugOptModQSFPRx3Power | read-only | current | This value represents the internally measured received power in channel 3 of QSFP. It is a positive number expressed in units of micro watts and can range from… |
| 1.3.6.1.4.1.2272.1.71.1.1.70 | ColumnrcPlugOptModQSFPRx4Power | read-only | current | This value represents the internally measured received power in channel 1 of QSFP. It is a positive number expressed in units of micro watts and can range from… |
| 1.3.6.1.4.1.2272.1.71.1.1.71 | ColumnrcPlugOptModQSFPTx1BiasStatus | read-only | current | Used to indicate the current laser bias status in channel 1 for QSFP |
| 1.3.6.1.4.1.2272.1.71.1.1.72 | ColumnrcPlugOptModQSFPTx2BiasStatus | read-only | current | Used to indicate the current laser bias status in channel 2 for QSFP |
| 1.3.6.1.4.1.2272.1.71.1.1.73 | ColumnrcPlugOptModQSFPTx3BiasStatus | read-only | current | Used to indicate the current laser bias status in channel 3 for QSFP |
| 1.3.6.1.4.1.2272.1.71.1.1.74 | ColumnrcPlugOptModQSFPTx4BiasStatus | read-only | current | Used to indicate the current laser bias status in channel 4 for QSFP |
| 1.3.6.1.4.1.2272.1.71.1.1.75 | ColumnrcPlugOptModQSFPTx1PowerStatus | read-only | current | Used to indicate the current transmitter power status in channel 1 of QSFP |
| 1.3.6.1.4.1.2272.1.71.1.1.76 | ColumnrcPlugOptModQSFPTx2PowerStatus | read-only | current | Used to indicate the current transmitter power status in channel 2 of QSFP |
| 1.3.6.1.4.1.2272.1.71.1.1.77 | ColumnrcPlugOptModQSFPTx3PowerStatus | read-only | current | Used to indicate the current transmitter power status in channel 3 of QSFP |
| 1.3.6.1.4.1.2272.1.71.1.1.78 | ColumnrcPlugOptModQSFPTx4PowerStatus | read-only | current | Used to indicate the current transmitter power status in channel 4 of QSFP |
| 1.3.6.1.4.1.2272.1.71.1.1.79 | ColumnrcPlugOptModQSFPRx1PowerStatus | read-only | current | Used to indicate the current receiver power status in channel 1 for QSFP |
| 1.3.6.1.4.1.2272.1.71.1.1.80 | ColumnrcPlugOptModQSFPRx2PowerStatus | read-only | current | Used to indicate the current receiver power status in channel 2 for QSFP |
| 1.3.6.1.4.1.2272.1.71.1.1.81 | ColumnrcPlugOptModQSFPRx3PowerStatus | read-only | current | Used to indicate the current receiver power status in channel 3 for QSFP |
| 1.3.6.1.4.1.2272.1.71.1.1.82 | ColumnrcPlugOptModQSFPRx4PowerStatus | read-only | current | Used to indicate the current receiver power status in channel 4 for QSFP |
| 1.3.6.1.4.1.2272.1.71.2 | NodercPlugOptModScalars | |||
| 1.3.6.1.4.1.2272.1.71.2.1 | ScalarrcPlugOptModDdmMonitor | read-write | current | Enable/disable the global polling monitor for DDM |
| 1.3.6.1.4.1.2272.1.71.2.2 | ScalarrcPlugOptModDdmMonitorInterval | read-write | current | Indicate the interval in which the DDM alert registers is polled |
| 1.3.6.1.4.1.2272.1.71.2.3 | ScalarrcPlugOptModDdmTrapSend | read-write | current | Enable/disable the global ddm trap send to SNMP manager |
| 1.3.6.1.4.1.2272.1.71.2.4 | ScalarrcPlugOptModDdmAlarmPortdown | read-write | current | Enable/disable the global portdown option when ddm alarm occurs |
| 1.3.6.1.4.1.2272.1.71.3 | TablercPlugOptModOperTable | not-accessible | current | Gbic QSFP table |
| 1.3.6.1.4.1.2272.1.71.3.1 | RowrcPlugOptModOperEntry | not-accessible | current | Entry containing info. for a particular port |
| 1.3.6.1.4.1.2272.1.71.3.1.1 | ColumnrcPlugOptModOperPortIndex | not-accessible | current | An index value that uniquely identifies a port on a blade or line-card. |
| 1.3.6.1.4.1.2272.1.71.3.1.2 | ColumnrcPlugOptModOperReset | read-write | current | This operational object is used to reset the QSFP on the port. It always return FALSE |
| 1.3.6.1.4.1.2272.1.71.4 | NodercPlugNotificationObjects | |||
| 1.3.6.1.4.1.2272.1.71.4.1 | ScalarrcPluggableModuleDescription | accessible-for-notify | current | Name or description of the Pluggable module. It is used to by the notification object rcnPluggableModuleInsertedInNotRecommendedPortTrap and rcnPluggableModule… |
| 1.3.6.1.4.1.2272.1.72 | Noderc8021ah | |||
| 1.3.6.1.4.1.2272.1.73 | NodercVrrp | |||
| 1.3.6.1.4.1.2272.1.73.1 | NodercVrrpMib | |||
| 1.3.6.1.4.1.2272.1.73.1.1 | NodercVrrpObjects | |||
| 1.3.6.1.4.1.2272.1.73.1.1.1 | NodercVrrpScalars | |||
| 1.3.6.1.4.1.2272.1.73.1.1.1.1 | ScalarrcVrrpPingVirtualAddrEnable | read-write | current | Used to configure whether this device should respond to pings directed to a virtual router's IP address. |
| 1.3.6.1.4.1.2272.1.73.1.1.1.2 | ScalarrcVrrpTrapStateTransitionType | read-only | current | Potential types of state transitions. Used by rcVrrpTrapStateTransition trap. |
| 1.3.6.1.4.1.2272.1.73.1.1.1.3 | ScalarrcVrrpTrapStateTransitionCause | read-only | current | Potential types of causes that will generate a rcVrrpTrapStateTransition trap. |
| 1.3.6.1.4.1.2272.1.73.1.1.2 | TablercVrrpOperTable | not-accessible | current | Operations table for a VRRP router which consists of a sequence (i.e., one or more conceptual rows) of 'rcVrrpOperEntry' items. |
| 1.3.6.1.4.1.2272.1.73.1.1.2.1 | RowrcVrrpOperEntry | not-accessible | current | An entry in the rcVrrpOperTable containing the operational characteristics of a virtual router. On a VRRP router, a given virtual router is identified by a com… |
| 1.3.6.1.4.1.2272.1.73.1.1.2.1.1 | ColumnrcVrrpOperIfIndex | not-accessible | current | port interface index. |
| 1.3.6.1.4.1.2272.1.73.1.1.2.1.2 | ColumnrcVrrpOperVrId | read-only | current | This object contains the Virtual Router Identifier (VRID). |
| 1.3.6.1.4.1.2272.1.73.1.1.2.1.3 | ColumnrcVrrpOperIpAddr | read-write | current | The assigned IP addresses that a virtual router is responsible for backing up. |
| 1.3.6.1.4.1.2272.1.73.1.1.2.1.4 | ColumnrcVrrpOperVirtualMacAddr | read-only | current | The virtual MAC address of the virtual router. This is derived as follows: 00-00-5E-00-01-<VRID>. Where the first three octets consist of the IANA's OUI; The n… |
| 1.3.6.1.4.1.2272.1.73.1.1.2.1.5 | ColumnrcVrrpOperState | read-only | current | The current state of the virtual router. |
| 1.3.6.1.4.1.2272.1.73.1.1.2.1.6 | ColumnrcVrrpOperControl | read-write | current | This object will enable/disable the virtual router function. Setting the value to 'enabled', will transition the state of the router from 'initialize to 'backu… |
| 1.3.6.1.4.1.2272.1.73.1.1.2.1.7 | ColumnrcVrrpOperPriority | read-write | current | This object specifies the priority for the virtual router (e.g., master election) with respect to other virtual routers that are backing up a one or more assoc… |
| 1.3.6.1.4.1.2272.1.73.1.1.2.1.8 | ColumnrcVrrpOperIpAddrCount | read-only | current | The number of IP addresses that are associated with this virtual router. This number is equal to the number of rows in the vrrpAssoIpAddrTable that correspond … |
| 1.3.6.1.4.1.2272.1.73.1.1.2.1.9 | ColumnrcVrrpOperMasterIpAddr | read-only | current | The master router's real (primary) IP address. This is the IP address listed as the source in VRRP advertisement last received by this virtual router |
| 1.3.6.1.4.1.2272.1.73.1.1.2.1.10 | ColumnrcVrrpOperAuthType | read-write | current | Authentication type used for VRRP protocol exchanges between virtual routers. |
| 1.3.6.1.4.1.2272.1.73.1.1.2.1.11 | ColumnrcVrrpOperAuthKey | read-write | current | The Authentication Key. If the virtual router's Authorization Type is 'simpleTextPassword', and the key length is shorter than 8 octets, the agent will left ad… |
| 1.3.6.1.4.1.2272.1.73.1.1.2.1.12 | ColumnrcVrrpOperHMACMD5Key | read-write | current | The Authentication Key. If the virtual router's 'Authorization Type' is 'ipAuthenticationHeader', and the key length is shorter than 16 octets, the agent will … |
| 1.3.6.1.4.1.2272.1.73.1.1.2.1.13 | ColumnrcVrrpOperAdvertisementInterval | read-write | current | This is the time interval, in seconds, between sending advertisement messages. Only the master router sends VRRP advertisements. |
| 1.3.6.1.4.1.2272.1.73.1.1.2.1.14 | ColumnrcVrrpOperPreemptMode | read-write | current | Controls whether a higher priority virtual router will preempt a lower priority master. |
| 1.3.6.1.4.1.2272.1.73.1.1.2.1.15 | ColumnrcVrrpOperVirtualRouterUpTime | read-only | current | This is the time interval (in hundredths of a second) since this virtual router was initialized. |
| 1.3.6.1.4.1.2272.1.73.1.1.2.1.16 | ColumnrcVrrpOperRowStatus | read-write | current | The row status variable, used according to installation and removal conventions for conceptual rows. Setting this object to 'createAndGo' results in enabling t… |
| 1.3.6.1.4.1.2272.1.73.1.1.2.1.17 | ColumnrcVrrpOperCriticalIpAddr | read-write | current | IP address of the interface that will cause a shutdown event. |
| 1.3.6.1.4.1.2272.1.73.1.1.2.1.18 | ColumnrcVrrpOperHoldDownTimer | read-write | current | Used to configure the amount of time (in seconds) to wait before preempting the current vrrp master. |
| 1.3.6.1.4.1.2272.1.73.1.1.2.1.19 | ColumnrcVrrpOperHoldDownState | read-only | current | Used to indicate the hold-down state of this vrrp interface. If the hold-down timer is operational this variable will be set to 'active'. 'dormant' otherwise. |
| 1.3.6.1.4.1.2272.1.73.1.1.2.1.20 | ColumnrcVrrpOperHoldDownTimeRemaining | read-only | current | Used to indicate the amount of time (in seconds) left before the rcVrrpOperHoldDownTimer will expire. |
| 1.3.6.1.4.1.2272.1.73.1.1.2.1.21 | ColumnrcVrrpOperAction | read-write | current | Used to trigger an action on this vrrp interface. |
| 1.3.6.1.4.1.2272.1.73.1.1.2.1.22 | ColumnrcVrrpOperCriticalIpAddrEnable | read-write | current | Indicate if an user-defined critical IP address should be enabled. 'NO' = use the default IP address (0.0.0.0). No effect if an user-defined IP address does no… |
| 1.3.6.1.4.1.2272.1.73.1.1.2.1.23 | ColumnrcVrrpOperBackUpMaster | read-write | current | Enable the backup VRRP switch traffic forwarding. This will reduce the traffic in IST link in the time of SMLT. |
| 1.3.6.1.4.1.2272.1.73.1.1.2.1.24 | ColumnrcVrrpOperBackUpMasterState | read-only | current | Indicate whether backup VRRP switch traffic forwarding is enabled or not. |
| 1.3.6.1.4.1.2272.1.73.1.1.2.1.25 | ColumnrcVrrpOperFasterAdvInterval | read-write | current | This is the faster advertisement interval, in milliseconds, between sending advertisement messages. When the faster advertisement interval enable is checked, t… |
| 1.3.6.1.4.1.2272.1.73.1.1.2.1.26 | ColumnrcVrrpOperFasterAdvIntervalEnable | read-write | current | Used to indicate if the Faster Advertisement Interval should be used. 'Disable' means use regular Advertisement interval. |
| 1.3.6.1.4.1.2272.1.73.1.1.3 | TablercVrrpRouterStatsTable | not-accessible | current | Table of virtual router statistics. |
| 1.3.6.1.4.1.2272.1.73.1.1.3.1 | RowrcVrrpRouterStatsEntry | not-accessible | current | An entry in the table, containing statistics information about a given virtual router. |
| 1.3.6.1.4.1.2272.1.73.1.1.3.1.1 | ColumnrcVrrpStatsIfIndex | read-only | current | port interface index. |
| 1.3.6.1.4.1.2272.1.73.1.1.3.1.2 | ColumnrcVrrpStatsVrId | read-only | current | This object contains the Virtual Router Identifier (VRID). |
| 1.3.6.1.4.1.2272.1.73.1.1.3.1.3 | ColumnrcVrrpStatsBecomeMaster | read-only | current | The total number of times that this virtual router's state has transitioned from BACKUP to MASTER. |
| 1.3.6.1.4.1.2272.1.73.1.1.3.1.4 | ColumnrcVrrpStatsAdvertiseRcvd | read-only | current | The total number of VRRP advertisements received by this virtual router. |
| 1.3.6.1.4.1.2272.1.73.1.1.3.1.5 | ColumnrcVrrpStatsAdvertiseIntervalErrors | read-only | current | The total number of VRRP advertisement packets received for which the advertisement interval is different than the one configured for the local virtual router. |
| 1.3.6.1.4.1.2272.1.73.1.1.3.1.6 | ColumnrcVrrpStatsPasswdSecurityViolations | read-only | current | The total number of VRRP packets received that do not pass the simple text password authentification check. |
| 1.3.6.1.4.1.2272.1.73.1.1.3.1.7 | ColumnrcVrrpStatsHmacSecurityViolations | read-only | current | The total number of VRRP packets received that do not pass the HMAC-MD5-96 authentification check. |
| 1.3.6.1.4.1.2272.1.73.1.1.3.1.8 | ColumnrcVrrpStatsIpTtlErrors | read-only | current | The total number of VRRP packets received by the virtual router with IP TTL (Time-To-Live) not equal to 255. |
| 1.3.6.1.4.1.2272.1.73.1.1.3.1.9 | ColumnrcVrrpStatsPriorityZeroPktsRcvd | read-only | current | The total number of VRRP packets received by the virtual router with a priority of '0'. |
| 1.3.6.1.4.1.2272.1.73.1.1.3.1.10 | ColumnrcVrrpStatsPriorityZeroPktsSent | read-only | current | The total number of VRRP packets sent by the virtual router with a priority of '0'. |
| 1.3.6.1.4.1.2272.1.73.1.1.3.1.11 | ColumnrcVrrpStatsInvalidTypePktsRcvd | read-only | current | The number of VRRP packets received by the virtual router with an invalid value in the 'type' field. |
| 1.3.6.1.4.1.2272.1.73.1.1.3.1.12 | ColumnrcVrrpStatsAddressListErrors | read-only | current | Packets received address list the address list does not match the locally configured list for the virtual router. |
| 1.3.6.1.4.1.2272.1.73.1.1.3.1.13 | ColumnrcVrrpStatsUnknownAuthType | read-only | current | Packets received with an unknown authentication type. |
| 1.3.6.1.4.1.2272.1.73.1.1.3.1.14 | ColumnrcVrrpStatsAuthTypeErrors | read-only | current | Packets received with 'Auth Type' not equal to the locally configured authentication method ('vrrpOperAuthType'). |
| 1.3.6.1.4.1.2272.1.73.1.2 | NodercVrrpNotifications | |||
| 1.3.6.1.4.1.2272.1.73.1.2.1 | NotificationrcVrrpTrapStateTransition | current | A rcVrrpTrapStateTransition trap signifies a state transition has occurred on a particular vrrp interface. Implementation of this trap is optional. | |
| 1.3.6.1.4.1.2272.1.74 | NodercMpls | |||
| 1.3.6.1.4.1.2272.1.74.1 | NodercMplsMib | |||
| 1.3.6.1.4.1.2272.1.74.1.0 | NodercMplsNotifications | |||
| 1.3.6.1.4.1.2272.1.74.1.1 | NodercMplsObjects | |||
| 1.3.6.1.4.1.2272.1.74.1.1.1 | NodercMplsGlobalGroup | |||
| 1.3.6.1.4.1.2272.1.74.1.1.1.1 | NodercMplsGlobalScalars | |||
| 1.3.6.1.4.1.2272.1.74.1.1.1.1.1 | ScalarrcMplsRouterId | read-write | current | IP address of the circuitless interface to be used as router-id |
| 1.3.6.1.4.1.2272.1.74.1.1.1.1.2 | ScalarrcMplsLdpAdminStatus | read-write | current | State of global LDP - enabled or disabled |
| 1.3.6.1.4.1.2272.1.74.1.1.1.1.3 | ScalarrcMplsLdpPenultimateHopPop | read-write | current | State of global LDP Penultimate Hop Popping. |
| 1.3.6.1.4.1.2272.1.74.1.1.1.1.4 | ScalarrcMplsLdpHelloHoldTimer | read-write | current | The global Hello Hold Time in seconds. |
| 1.3.6.1.4.1.2272.1.74.1.1.1.1.5 | ScalarrcMplsLdpSessionKeepAlive | read-write | current | The global Session Keep alive in seconds. |
| 1.3.6.1.4.1.2272.1.74.1.1.1.1.6 | ScalarrcMplsLdpPathVectorLimit | read-write | current | The global path vector limit. |
| 1.3.6.1.4.1.2272.1.74.1.1.1.1.7 | ScalarrcMplsLdpHopCountLimit | read-write | current | The global loop detect hop count limit. |
| 1.3.6.1.4.1.2272.1.74.1.1.1.1.8 | ScalarrcMplsLdpEgressPolicyStatus | read-write | current | State of LDP Egress-policy enabled or disabled |
| 1.3.6.1.4.1.2272.1.74.1.1.1.1.9 | ScalarrcMplsRsvpAdminStatus | read-write | current | State of global RSVP - enabled or disabled |
| 1.3.6.1.4.1.2272.1.74.1.1.1.1.10 | ScalarrcMplsRsvpPenultimateHopPop | read-write | current | State of global RSVP Penultimate Hop Popping. |
| 1.3.6.1.4.1.2272.1.74.1.1.1.1.11 | ScalarrcMplsRsvpHelloInterval | read-write | current | The global RSVP hello interval. |
| 1.3.6.1.4.1.2272.1.74.1.1.1.1.12 | ScalarrcMplsRsvpRefreshReduction | read-write | current | State of global RSVP refresh reduction - enabled or disabled |
| 1.3.6.1.4.1.2272.1.74.1.1.1.1.13 | ScalarrcMplsRsvpRefreshInterval | read-write | current | The global value for RSVP refresh interval. |
| 1.3.6.1.4.1.2272.1.74.1.1.1.1.14 | ScalarrcMplsRsvpRefreshMultiplier | read-write | current | The global value for RSVP refresh multiplier. |
| 1.3.6.1.4.1.2272.1.74.1.1.1.1.15 | ScalarrcMplsRsvpMessageBundling | read-write | current | State of global RSVP message bundling - enabled or disabled |
| 1.3.6.1.4.1.2272.1.74.1.1.1.1.16 | ScalarrcMplsLspIngressStartLabel | read-write | current | The global ingress rsp start label. |
| 1.3.6.1.4.1.2272.1.74.1.1.1.1.17 | ScalarrcMplsLspEgressStartLabel | read-write | current | The global egress rsp start label. |
| 1.3.6.1.4.1.2272.1.74.1.1.1.1.18 | ScalarrcMplsLspIngressPktEnable | read-write | current | Enable/Disable ingress rsp pkt lsp stats |
| 1.3.6.1.4.1.2272.1.74.1.1.1.1.19 | ScalarrcMplsLspEgressPktEnable | read-write | current | Enable/Disable egress rsp pkt lsp stats |
| 1.3.6.1.4.1.2272.1.74.1.1.1.1.20 | ScalarrcMplsLdpClearStats | read-write | current | Clear global LDP Statistics. |
| 1.3.6.1.4.1.2272.1.74.1.1.1.1.21 | ScalarrcMplsRsvpClearStats | read-write | current | Clear global RSVP Statistics. |
| 1.3.6.1.4.1.2272.1.74.1.1.1.1.22 | ScalarrcMplsLspClearStats | read-write | current | Clear 'transmit' or 'receive' lsp statistics. |
| 1.3.6.1.4.1.2272.1.74.1.1.1.2 | TablercMplsIpStaticFecTable | not-accessible | current | This is the table of ip-static fec mappings for both RSVP and LDP . |
| 1.3.6.1.4.1.2272.1.74.1.1.1.2.1 | RowrcMplsIpStaticFecEntry | not-accessible | current | A static fec mapping to an rsvp lsp or ldp egress IP address. |
| 1.3.6.1.4.1.2272.1.74.1.1.1.2.1.1 | ColumnrcMplsIpStaticFecDest | not-accessible | current | The statically-configured destination IP address. |
| 1.3.6.1.4.1.2272.1.74.1.1.1.2.1.2 | ColumnrcMplsIpStaticFecMask | not-accessible | current | The statically-configured destination IP mask. |
| 1.3.6.1.4.1.2272.1.74.1.1.1.2.1.3 | ColumnrcMplsIpStaticFecTunnelName | read-create | current | The rsvp lsp tunnel name associated with rcMplsIpStaticFecTunnelId. This field will be null if the value of rcMplsIpStaticFecTunnelId is 0. |
| 1.3.6.1.4.1.2272.1.74.1.1.1.2.1.4 | ColumnrcMplsIpStaticFecTunnelId | read-create | current | The rsvp lsp tunnel index (from mplsTunnelTable defined in rfc3812) if this is an rsvp Ip statically mapped address. This field will be 0 if this is an LDP Egr… |
| 1.3.6.1.4.1.2272.1.74.1.1.1.2.1.5 | ColumnrcMplsIpStaticFecEgressAddr | read-create | current | The LDP Egress IP Address. This field will be 0 if this is an rsvp tunnel fec mapping. |
| 1.3.6.1.4.1.2272.1.74.1.1.1.2.1.6 | ColumnrcMplsIpStaticFecEgressMask | read-create | current | The LDP Egress IP Mask. This field will be 0 if this is an rsvp tunnel fec mapping. |
| 1.3.6.1.4.1.2272.1.74.1.1.1.2.1.7 | ColumnrcMplsIpStaticFecState | read-only | current | Indicates the actual operational status of this static fec. |
| 1.3.6.1.4.1.2272.1.74.1.1.1.2.1.8 | ColumnrcMplsIpStaticFecRowStatus | read-create | current | This variable is used to create, modify, and/or delete a row in this table. |
| 1.3.6.1.4.1.2272.1.74.1.1.1.3 | TablercMplsIpFtnTable | not-accessible | current | This is the table of mpls Ip FTN. |
| 1.3.6.1.4.1.2272.1.74.1.1.1.3.1 | RowrcMplsIpFtnEntry | not-accessible | current | An mpls FTN entry . |
| 1.3.6.1.4.1.2272.1.74.1.1.1.3.1.1 | ColumnrcMplsIpFtnDest | not-accessible | current | The FTN destination IP address. |
| 1.3.6.1.4.1.2272.1.74.1.1.1.3.1.2 | ColumnrcMplsIpFtnMask | not-accessible | current | The FTN destination IP mask. |
| 1.3.6.1.4.1.2272.1.74.1.1.1.3.1.3 | ColumnrcMplsIpFtnType | read-only | current | The FTN next hop label type. |
| 1.3.6.1.4.1.2272.1.74.1.1.1.3.1.4 | ColumnrcMplsIpFtnOutLabel | read-only | current | The FTN outgoing label. |
| 1.3.6.1.4.1.2272.1.74.1.1.1.3.1.5 | ColumnrcMplsIpFtnOutIfIndex | read-only | current | The index value which uniquely identifies the interface to which this entry is applicable. The interface identified by a particular value of this index is the … |
| 1.3.6.1.4.1.2272.1.74.1.1.1.3.1.6 | ColumnrcMplsIpFtnNextHop | read-only | current | The FTN next hop Ip Address. |
| 1.3.6.1.4.1.2272.1.74.1.1.1.4 | TablercMplsIpIlmTable | not-accessible | current | This is the table of mpls Incoming Label Mapping. |
| 1.3.6.1.4.1.2272.1.74.1.1.1.4.1 | RowrcMplsIpIlmEntry | not-accessible | current | An mpls Incoming Label Map entry . |
| 1.3.6.1.4.1.2272.1.74.1.1.1.4.1.1 | ColumnrcMplsIpIlmInLabel | not-accessible | current | The Incoming Label. |
| 1.3.6.1.4.1.2272.1.74.1.1.1.4.1.2 | ColumnrcMplsIpIlmInIfIndex | read-only | current | The index value which uniquely identifies the incoming interface to which this entry is applicable. The interface identified by a particular value of this inde… |
| 1.3.6.1.4.1.2272.1.74.1.1.1.4.1.3 | ColumnrcMplsIpIlmOutLabel | read-only | current | The Outgoing Label. |
| 1.3.6.1.4.1.2272.1.74.1.1.1.4.1.4 | ColumnrcMplsIpIlmOutIfIndex | read-only | current | The index value which uniquely identifies the outgoing interface to which this entry is applicable. The interface identified by a particular value of this inde… |
| 1.3.6.1.4.1.2272.1.74.1.1.1.4.1.5 | ColumnrcMplsIpIlmNextHop | read-only | current | The next hop Ip Address. |
| 1.3.6.1.4.1.2272.1.74.1.1.1.5 | TablercMplsIngressLspStatTable | not-accessible | current | This is the table of mpls Incoming Label Stats. |
| 1.3.6.1.4.1.2272.1.74.1.1.1.5.1 | RowrcMplsIngressLspStatEntry | not-accessible | current | An mpls Incoming Label Stat entry . |
| 1.3.6.1.4.1.2272.1.74.1.1.1.5.1.1 | ColumnrcMplsIngressLspPort | not-accessible | current | The incoming port for the lsp. |
| 1.3.6.1.4.1.2272.1.74.1.1.1.5.1.2 | ColumnrcMplsIngressLspLabel | not-accessible | current | The Incoming Lsp Label. |
| 1.3.6.1.4.1.2272.1.74.1.1.1.5.1.3 | ColumnrcMplsIngressLspPkts | read-only | current | Count of incoming packets for the corresponding lsp and port. |
| 1.3.6.1.4.1.2272.1.74.1.1.1.6 | TablercMplsEgressLspStatTable | not-accessible | current | This is the table of mpls OutGoing Label Stats. |
| 1.3.6.1.4.1.2272.1.74.1.1.1.6.1 | RowrcMplsEgressLspStatEntry | not-accessible | current | An mpls OutGoing Label Stat entry . |
| 1.3.6.1.4.1.2272.1.74.1.1.1.6.1.1 | ColumnrcMplsEgressLspPort | not-accessible | current | The OutGoing port for the lsp. |
| 1.3.6.1.4.1.2272.1.74.1.1.1.6.1.2 | ColumnrcMplsEgressLspLabel | not-accessible | current | The OutGoing Lsp Label. |
| 1.3.6.1.4.1.2272.1.74.1.1.1.6.1.3 | ColumnrcMplsEgressLspPkts | read-only | current | Count of outgoing packets for the corresponding lsp and port. |
| 1.3.6.1.4.1.2272.1.74.1.1.2 | NodercMplsRsvpGroup | |||
| 1.3.6.1.4.1.2272.1.74.1.1.2.1 | NodercMplsRsvpSummaryGroup | |||
| 1.3.6.1.4.1.2272.1.74.1.1.2.1.1 | ScalarrcMplsRsvpSummaryVersion | read-only | current | This is the RSVP version number. |
| 1.3.6.1.4.1.2272.1.74.1.1.2.1.2 | ScalarrcMplsRsvpSummaryState | read-only | current | This is the RSVP protocol state. |
| 1.3.6.1.4.1.2272.1.74.1.1.2.1.3 | ScalarrcMplsRsvpSummaryLSPRetryTimer | read-only | current | This is the retry timer (secs) for the LSPs starting from this node, in case of failure. A value of zero means no retry on LSPs. |
| 1.3.6.1.4.1.2272.1.74.1.1.2.1.4 | ScalarrcMplsRsvpSummaryLSPRetryLimit | read-only | current | This is the retry limit for the LSPs starting from this node. It indicates how many times an LSP is retried before giving up. A value of zero means try infinit… |
| 1.3.6.1.4.1.2272.1.74.1.1.2.1.5 | ScalarrcMplsRsvpSummaryLSPDecayRate | read-only | current | This is the decay rate (percent) for LSPs starting on this node. |
| 1.3.6.1.4.1.2272.1.74.1.1.2.1.6 | ScalarrcMplsRsvpSummaryPHP | read-only | current | This is the configured RSVP PHP support on this node. Possible values are implicit-null, explicit-null, or disabled. |
| 1.3.6.1.4.1.2272.1.74.1.1.2.2 | TablercMplsRsvpTunnelExtTable | not-accessible | current | This is the table of mpls rsvp tunnels. This table supplements the mplsTunnelTable from rfc3812. |
| 1.3.6.1.4.1.2272.1.74.1.1.2.2.1 | RowrcMplsRsvpTunnelExtEntry | not-accessible | current | An entry in the mpls tunnel table. |
| 1.3.6.1.4.1.2272.1.74.1.1.2.2.1.1 | ColumnrcMplsRsvpTunnelExtIndex | not-accessible | current | The Tunnel Index. The value of this object should mimic the value of mplsTunnelIndex of the MplsTunnelEntry of the mpls tunnel for which this extended tunnel t… |
| 1.3.6.1.4.1.2272.1.74.1.1.2.2.1.2 | ColumnrcMplsRsvpTunnelExtInstance | not-accessible | current | The Tunnel Instance. The value of this object should mimic the value of mplsTunnelInstance of the MplsTunnelEntry of the mpls tunnel for which this extended tu… |
| 1.3.6.1.4.1.2272.1.74.1.1.2.2.1.3 | ColumnrcMplsRsvpTunnelExtIngressLSRId | not-accessible | current | The Rsvp Tunnel Ingress LSR Id. The value of this object should mimic the value of the mplsTunnelIngressLSRId of the MplsTunnelEntry of the mpls tunnel for whi… |
| 1.3.6.1.4.1.2272.1.74.1.1.2.2.1.4 | ColumnrcMplsRsvpTunnelExtEgressLSRId | not-accessible | current | The Rsvp Tunnel Egress LSR Id. The value of this object should mimic the value of the mplsTunnelEgressLSRId of the MplsTunnelEntry of the mpls tunnel for which… |
| 1.3.6.1.4.1.2272.1.74.1.1.2.2.1.5 | ColumnrcMplsRsvpTunnelExtName | read-write | current | The Name of the tunnel associated with this LSP. |
| 1.3.6.1.4.1.2272.1.74.1.1.2.2.1.6 | ColumnrcMplsRsvpTunnelExtSwitchover | read-write | current | Switch this LSP from active status to inactive status or vice versa. |
| 1.3.6.1.4.1.2272.1.74.1.1.2.2.1.7 | ColumnrcMplsRsvpTunnelExtActiveStatus | read-only | current | This is 'true' if this is the active LSP of the tunnel. |
| 1.3.6.1.4.1.2272.1.74.1.1.2.2.1.8 | ColumnrcMplsRsvpTunnelExtResStyle | read-only | current | This is the reservation style of the tunnel. |
| 1.3.6.1.4.1.2272.1.74.1.1.2.2.1.9 | ColumnrcMplsRsvpTunnelExtLspId | read-only | current | This is the LSP Id of this LSP. |
| 1.3.6.1.4.1.2272.1.74.1.1.2.2.1.10 | ColumnrcMplsRsvpTunnelExtERO | read-only | current | This is the Explicit Route associated with this LSP. |
| 1.3.6.1.4.1.2272.1.74.1.1.2.2.1.11 | ColumnrcMplsRsvpTunnelExtRRO | read-only | current | This is the Recorded Route associated with this LSP. |
| 1.3.6.1.4.1.2272.1.74.1.1.2.2.1.12 | ColumnrcMplsRsvpTunnelExtInIfIndex | read-only | current | This is the incoming interface for the LSP. This applies to rows with mplsTunnelRole set to transit(2) or tail(3). |
| 1.3.6.1.4.1.2272.1.74.1.1.2.2.1.13 | ColumnrcMplsRsvpTunnelExtInLabel | read-only | current | This is the incoming Mpls Label. This applies to rows with mplsTunnelRole set to transit(2) or tail(3). |
| 1.3.6.1.4.1.2272.1.74.1.1.2.2.1.14 | ColumnrcMplsRsvpTunnelExtInNeighbor | read-only | current | This address of the previous-hop (upstream) router. This applies to rows with mplsTunnelRole set to transit(2) or tail(3). |
| 1.3.6.1.4.1.2272.1.74.1.1.2.2.1.15 | ColumnrcMplsRsvpTunnelExtOutIfIndex | read-only | current | This is the outgoing interface for the LSP. This applies to rows with mplsTunnelRole set to head(1) or transit(2). |
| 1.3.6.1.4.1.2272.1.74.1.1.2.2.1.16 | ColumnrcMplsRsvpTunnelExtOutLabel | read-only | current | This is the outgoing Mpls Label. This applies to rows with mplsTunnelRole set to head(1) or transit(2). |
| 1.3.6.1.4.1.2272.1.74.1.1.2.2.1.17 | ColumnrcMplsRsvpTunnelExtOutNeighbor | read-only | current | This address of the next-hop (downstream) router. This applies to rows with applies to rows with mplsTunnelRole set to head(1) or transit(2). |
| 1.3.6.1.4.1.2272.1.74.1.1.2.2.1.18 | ColumnrcMplsRsvpTunnelExtTSpecRate | read-only | current | This is the primary LSP TSpec Rate. This applies to rows with mplsTunnelRole set to transit(2) or tail(3). |
| 1.3.6.1.4.1.2272.1.74.1.1.2.2.1.19 | ColumnrcMplsRsvpTunnelExtTSpecSize | read-only | current | This is the primary LSP TSpec Size. This applies to rows with mplsTunnelRole set to transit(2) or tail(3). |
| 1.3.6.1.4.1.2272.1.74.1.1.2.2.1.20 | ColumnrcMplsRsvpTunnelExtTSpecPeak | read-only | current | This is the primary LSP TSpec Peak. This applies to rows with mplsTunnelRole set to transit(2) or tail(3). |
| 1.3.6.1.4.1.2272.1.74.1.1.2.2.1.21 | ColumnrcMplsRsvpTunnelExtTSpecMin | read-only | current | This is the primary LSP TSpec Min. This applies to rows with mplsTunnelRole set to transit(2) or tail(3). |
| 1.3.6.1.4.1.2272.1.74.1.1.2.2.1.22 | ColumnrcMplsRsvpTunnelExtTSpecMax | read-only | current | This is the primary lsp TSpec Max. This applies to rows with mplsTunnelRole set to transit(2) or tail(3). |
| 1.3.6.1.4.1.2272.1.74.1.1.2.2.1.23 | ColumnrcMplsRsvpTunnelExtInstanceUpTime | read-only | current | This is the time (in 100ths of a second) that this instance has been in the Oper 'Up' state. When the instance transitions out of the Oper 'Up' state the time … |
| 1.3.6.1.4.1.2272.1.74.1.1.2.2.1.24 | ColumnrcMplsRsvpTunnelExtLSPUpTime | read-only | current | This is the time (in 100ths of a second) that all instances of this LSP have been in the Oper Up state. The time is calculated based on the create time of the … |
| 1.3.6.1.4.1.2272.1.74.1.1.2.3 | TablercMplsRsvpNeighborTable | not-accessible | current | This is the table of mpls rsvp neighbors. |
| 1.3.6.1.4.1.2272.1.74.1.1.2.3.1 | RowrcMplsRsvpNeighborEntry | not-accessible | current | An entry in the mpls rsvp tunnel table. |
| 1.3.6.1.4.1.2272.1.74.1.1.2.3.1.1 | ColumnrcMplsRsvpNeighborAddress | not-accessible | current | This is the address of a learned neighbor. |
| 1.3.6.1.4.1.2272.1.74.1.1.2.3.1.2 | ColumnrcMplsRsvpNeighborHelloState | read-only | current | This is the state of hello exchange with the neighbor. |
| 1.3.6.1.4.1.2272.1.74.1.1.2.3.1.3 | ColumnrcMplsRsvpNeighborIfIndex | read-only | current | This is the interface index of the neighbor. |
| 1.3.6.1.4.1.2272.1.74.1.1.2.3.1.4 | ColumnrcMplsRsvpNeighborTime | read-only | current | This is the time the neighbor was learned. |
| 1.3.6.1.4.1.2272.1.74.1.1.2.3.1.5 | ColumnrcMplsRsvpNeighborPeriod | read-only | current | This is the RSVP Hello Interval. |
| 1.3.6.1.4.1.2272.1.74.1.1.2.3.1.6 | ColumnrcMplsRsvpNeighborSendCnt | read-only | current | This is the number of Hello packets sent to the neighbor. |
| 1.3.6.1.4.1.2272.1.74.1.1.2.3.1.7 | ColumnrcMplsRsvpNeighborRcvCnt | read-only | current | This is the number of Hellp packets received from the neighbor. |
| 1.3.6.1.4.1.2272.1.74.1.1.2.3.1.8 | ColumnrcMplsRsvpNeighborLocalInstance | read-only | current | This is the identification sent to the remote router during Hello message exchange. |
| 1.3.6.1.4.1.2272.1.74.1.1.2.3.1.9 | ColumnrcMplsRsvpNeighborRemoteInstance | read-only | current | This is the identification provided by the remote router during Hello message exchange. |
| 1.3.6.1.4.1.2272.1.74.1.1.2.3.1.10 | ColumnrcMplsRsvpNeighborCreationTime | read-only | current | This is the time the neighbor instance was created. |
| 1.3.6.1.4.1.2272.1.74.1.1.2.3.1.11 | ColumnrcMplsRsvpNeighborLastPktRxTime | read-only | current | This is the time that the last Hello message was received from the remote router. |
| 1.3.6.1.4.1.2272.1.74.1.1.2.3.1.12 | ColumnrcMplsRsvpNeighborRefReduction | read-only | current | This is the refresh-reduction status between the local router and the neighbor. |
| 1.3.6.1.4.1.2272.1.74.1.1.2.4 | TablercMplsRsvpInterfaceTable | not-accessible | current | This is the table of mpls rsvp interfaces. |
| 1.3.6.1.4.1.2272.1.74.1.1.2.4.1 | RowrcMplsRsvpInterfaceEntry | not-accessible | current | An entry in the mpls rsvp interface table. |
| 1.3.6.1.4.1.2272.1.74.1.1.2.4.1.1 | ColumnrcMplsRsvpInterfaceIfIndex | not-accessible | current | This is the interface index. |
| 1.3.6.1.4.1.2272.1.74.1.1.2.4.1.2 | ColumnrcMplsRsvpInterfaceAddress | read-only | current | This is the address of the interface. |
| 1.3.6.1.4.1.2272.1.74.1.1.2.4.1.3 | ColumnrcMplsRsvpInterfaceRefreshInterval | read-only | current | This is the RSVP refresh interval for the interface(seconds). |
| 1.3.6.1.4.1.2272.1.74.1.1.2.4.1.4 | ColumnrcMplsRsvpInterfaceRefreshMult | read-only | current | This is the configured RSVP refresh multiplier for the interface(seconds). |
| 1.3.6.1.4.1.2272.1.74.1.1.2.4.1.5 | ColumnrcMplsRsvpInterfaceHelloInterval | read-only | current | This is the configured RSVP Hello Interval of the interface (seconds). |
| 1.3.6.1.4.1.2272.1.74.1.1.2.4.1.6 | ColumnrcMplsRsvpInterfaceRefreshReduction | read-only | current | This is the configured RSVP refresh reduction support on the interface. |
| 1.3.6.1.4.1.2272.1.74.1.1.2.4.1.7 | ColumnrcMplsRsvpInterfaceMessageBundling | read-only | current | This indicates state of message bundling on the interface. |
| 1.3.6.1.4.1.2272.1.74.1.1.2.5 | TablercMplsRsvpStatsTable | not-accessible | current | This is the table of mpls rsvp statistics. |
| 1.3.6.1.4.1.2272.1.74.1.1.2.5.1 | RowrcMplsRsvpStatsEntry | not-accessible | current | An entry in the mpls rsvp statistics table. |
| 1.3.6.1.4.1.2272.1.74.1.1.2.5.1.1 | ColumnrcMplsRsvpStatsIfIndex | not-accessible | current | This is the interface index. This value can be 0 or a valid interface index. When 0 the global rsvp statistics are retrieved. |
| 1.3.6.1.4.1.2272.1.74.1.1.2.5.1.2 | ColumnrcMplsRsvpStatsPathRcv | read-only | current | This is the path received count. |
| 1.3.6.1.4.1.2272.1.74.1.1.2.5.1.3 | ColumnrcMplsRsvpStatsPathSent | read-only | current | This is the path sent count. |
| 1.3.6.1.4.1.2272.1.74.1.1.2.5.1.4 | ColumnrcMplsRsvpStatsPathErrRcv | read-only | current | This is the path error receives count. |
| 1.3.6.1.4.1.2272.1.74.1.1.2.5.1.5 | ColumnrcMplsRsvpStatsPathErrSent | read-only | current | This is the path error sent count. |
| 1.3.6.1.4.1.2272.1.74.1.1.2.5.1.6 | ColumnrcMplsRsvpStatsPathTearRcv | read-only | current | This is the path tear receives count. |
| 1.3.6.1.4.1.2272.1.74.1.1.2.5.1.7 | ColumnrcMplsRsvpStatsPathTearSent | read-only | current | This is the path tear sent count. |
| 1.3.6.1.4.1.2272.1.74.1.1.2.5.1.8 | ColumnrcMplsRsvpStatsResvRcv | read-only | current | This is the reservation received count. |
| 1.3.6.1.4.1.2272.1.74.1.1.2.5.1.9 | ColumnrcMplsRsvpStatsResvSent | read-only | current | This is the reservation sent count. |
| 1.3.6.1.4.1.2272.1.74.1.1.2.5.1.10 | ColumnrcMplsRsvpStatsResvErrRcv | read-only | current | This is the reservation error receives count. |
| 1.3.6.1.4.1.2272.1.74.1.1.2.5.1.11 | ColumnrcMplsRsvpStatsResvErrSent | read-only | current | This is the reservation error sent count. |
| 1.3.6.1.4.1.2272.1.74.1.1.2.5.1.12 | ColumnrcMplsRsvpStatsResvTearRcv | read-only | current | This is the resv tear receives count. |
| 1.3.6.1.4.1.2272.1.74.1.1.2.5.1.13 | ColumnrcMplsRsvpStatsResvTearSent | read-only | current | This is the resv tear sent count. |
| 1.3.6.1.4.1.2272.1.74.1.1.2.5.1.14 | ColumnrcMplsRsvpStatsConfTearRcv | read-only | current | This is the conf tear receives count. |
| 1.3.6.1.4.1.2272.1.74.1.1.2.5.1.15 | ColumnrcMplsRsvpStatsConfTearSent | read-only | current | This is the conf tear sent count. |
| 1.3.6.1.4.1.2272.1.74.1.1.2.5.1.16 | ColumnrcMplsRsvpStatsAckRcv | read-only | current | This is the acks receives count. |
| 1.3.6.1.4.1.2272.1.74.1.1.2.5.1.17 | ColumnrcMplsRsvpStatsAckSent | read-only | current | This is the acks sent count. |
| 1.3.6.1.4.1.2272.1.74.1.1.2.5.1.18 | ColumnrcMplsRsvpStatsSRefreshRcv | read-only | current | This is the summary refresh receives count. |
| 1.3.6.1.4.1.2272.1.74.1.1.2.5.1.19 | ColumnrcMplsRsvpStatsSRefreshSent | read-only | current | This is the summary refresh sent count. |
| 1.3.6.1.4.1.2272.1.74.1.1.2.5.1.20 | ColumnrcMplsRsvpStatsHelloReqRcv | read-only | current | This is the hello request receives count. |
| 1.3.6.1.4.1.2272.1.74.1.1.2.5.1.21 | ColumnrcMplsRsvpStatsHelloReqSent | read-only | current | This is the hello request sent count. |
| 1.3.6.1.4.1.2272.1.74.1.1.2.5.1.22 | ColumnrcMplsRsvpStatsHelloAckRcv | read-only | current | This is the hello ack receives count. |
| 1.3.6.1.4.1.2272.1.74.1.1.2.5.1.23 | ColumnrcMplsRsvpStatsHelloAckSent | read-only | current | This is the hello ack sent count. |
| 1.3.6.1.4.1.2272.1.74.1.1.2.5.1.24 | ColumnrcMplsRsvpStatsBadIpHdr | read-only | current | This is the count of pkts with bad IP Header. |
| 1.3.6.1.4.1.2272.1.74.1.1.2.5.1.25 | ColumnrcMplsRsvpStatsBadVersion | read-only | current | This is the count of pkts with Bad Version. |
| 1.3.6.1.4.1.2272.1.74.1.1.2.5.1.26 | ColumnrcMplsRsvpStatsBadRsvpLen | read-only | current | This is the count of pkts with Bad Rsvp length. |
| 1.3.6.1.4.1.2272.1.74.1.1.2.5.1.27 | ColumnrcMplsRsvpStatsBadCksum | read-only | current | This is the count of pkts with Bad Checksum. |
| 1.3.6.1.4.1.2272.1.74.1.1.2.5.1.28 | ColumnrcMplsRsvpStatsBadMsgType | read-only | current | This is the count of pkts with Bad Message type. |
| 1.3.6.1.4.1.2272.1.74.1.1.2.5.1.29 | ColumnrcMplsRsvpStatsBadMsgForm | read-only | current | This is the count of pkts with Bad Message Form. |
| 1.3.6.1.4.1.2272.1.74.1.1.2.5.1.30 | ColumnrcMplsRsvpStatsBadIntf | read-only | current | This is the count of pkts received on a Bad Interface. |
| 1.3.6.1.4.1.2272.1.74.1.1.2.5.1.31 | ColumnrcMplsRsvpStatsClear | read-write | current | Clear RSVP Statistics for the interface. |
| 1.3.6.1.4.1.2272.1.74.1.1.3 | NodercMplsLdpGroup | |||
| 1.3.6.1.4.1.2272.1.74.1.1.3.1 | NodercMplsLdpSummaryGroup | |||
| 1.3.6.1.4.1.2272.1.74.1.1.3.1.1 | ScalarrcMplsLdpSummaryIntAdjCount | read-only | current | This is the LDP summary index. |
| 1.3.6.1.4.1.2272.1.74.1.1.3.1.2 | ScalarrcMplsLdpSummaryExtAdjCount | read-only | current | This is the LDP summary index. |
| 1.3.6.1.4.1.2272.1.74.1.1.3.1.3 | ScalarrcMplsLdpSummarySessionCount | read-only | current | This is the LDP summary session count. |
| 1.3.6.1.4.1.2272.1.74.1.1.3.1.4 | ScalarrcMplsLdpSummaryRouteCount | read-only | current | This is the LDP summary route count. |
| 1.3.6.1.4.1.2272.1.74.1.1.3.1.5 | ScalarrcMplsLdpSummaryLdpId | read-only | current | This is the LDP summary Local LDP Id. |
| 1.3.6.1.4.1.2272.1.74.1.1.3.1.6 | ScalarrcMplsLdpSummaryLspCount | read-only | current | This is the LDP summary LSP count. |
| 1.3.6.1.4.1.2272.1.74.1.1.3.1.7 | ScalarrcMplsLdpSummaryInSegCount | read-only | current | This is the LDP summary in segment count. |
| 1.3.6.1.4.1.2272.1.74.1.1.3.1.8 | ScalarrcMplsLdpSummaryOutSegCount | read-only | current | This is the LDP summary out segment count. |
| 1.3.6.1.4.1.2272.1.74.1.1.3.1.9 | ScalarrcMplsLdpSummaryRedistConn | read-only | current | This is the LDP policy redist enable flag. |
| 1.3.6.1.4.1.2272.1.74.1.1.3.2 | TablercMplsLdpDiscoveryTable | not-accessible | current | This is the table of mpls ldp discoveries. |
| 1.3.6.1.4.1.2272.1.74.1.1.3.2.1 | RowrcMplsLdpDiscoveryEntry | not-accessible | current | An entry in the mpls ldp discovery table. |
| 1.3.6.1.4.1.2272.1.74.1.1.3.2.1.1 | ColumnrcMplsLdpDiscoveryIfIndex | not-accessible | current | This is the interface index. |
| 1.3.6.1.4.1.2272.1.74.1.1.3.2.1.2 | ColumnrcMplsLdpDiscoveryPeerLdpId | not-accessible | current | This is the peer ldp id. |
| 1.3.6.1.4.1.2272.1.74.1.1.3.2.1.3 | ColumnrcMplsLdpDiscoveryPeerTransportAddr | read-only | current | This is the peer transport address to which an LDP session has been provisioned. |
| 1.3.6.1.4.1.2272.1.74.1.1.3.2.1.4 | ColumnrcMplsLdpDiscoveryNegotiatedHoldTime | read-only | current | This is the hold time negotiated between peers. |
| 1.3.6.1.4.1.2272.1.74.1.1.3.2.1.5 | ColumnrcMplsLdpDiscoveryConfSeqNum | read-only | current | This is the configured sequence number sent by the peer. |
| 1.3.6.1.4.1.2272.1.74.1.1.3.2.1.6 | ColumnrcMplsLdpDiscoveryExtendedDiscovery | read-only | current | If set to 1, extended discovery is enabled. If set to 0, basic discovery is enabled. |
| 1.3.6.1.4.1.2272.1.74.1.1.3.3 | TablercMplsLdpPathTable | not-accessible | current | This is the table of mpls LDP Paths between a local peer and a remote peer . |
| 1.3.6.1.4.1.2272.1.74.1.1.3.3.1 | RowrcMplsLdpPathEntry | not-accessible | current | An entry in the mpls ldp path table. |
| 1.3.6.1.4.1.2272.1.74.1.1.3.3.1.1 | ColumnrcMplsLdpPathType | not-accessible | current | This is the path type. ATG_NHR_LDP_FEC_TYPE_NONE 0 ATG_NHR_LDP_FEC_TYPE_HOST 1 ATG_NHR_LDP_FEC_TYPE_PREFIX 2 ATG_NHR_LDP_FEC_TYPE_VC 3 ATG_NHR_LDP_FEC_TYPE_VC_… |
| 1.3.6.1.4.1.2272.1.74.1.1.3.3.1.2 | ColumnrcMplsLdpPathAddrType | not-accessible | current | This is the path address type. |
| 1.3.6.1.4.1.2272.1.74.1.1.3.3.1.3 | ColumnrcMplsLdpPathAddrPrefixLength | not-accessible | current | This is the path address prefix length. |
| 1.3.6.1.4.1.2272.1.74.1.1.3.3.1.4 | ColumnrcMplsLdpPathAddr | not-accessible | current | This is the path address. |
| 1.3.6.1.4.1.2272.1.74.1.1.3.3.1.5 | ColumnrcMplsLdpPathInLabel | read-only | current | This is the path address prefix length. |
| 1.3.6.1.4.1.2272.1.74.1.1.3.4 | TablercMplsLdpPathRemotePeerTable | not-accessible | current | This is the table of LDP paths to a given remote peer. |
| 1.3.6.1.4.1.2272.1.74.1.1.3.4.1 | RowrcMplsLdpPathRemotePeerEntry | not-accessible | current | An entry in the mpls ldp path remote peer table. |
| 1.3.6.1.4.1.2272.1.74.1.1.3.4.1.1 | ColumnrcMplsLdpPathRemotePeerType | not-accessible | current | This is the path type. ATG_NHR_LDP_FEC_TYPE_NONE 0 ATG_NHR_LDP_FEC_TYPE_HOST 1 ATG_NHR_LDP_FEC_TYPE_PREFIX 2 ATG_NHR_LDP_FEC_TYPE_VC 3 ATG_NHR_LDP_FEC_TYPE_VC_… |
| 1.3.6.1.4.1.2272.1.74.1.1.3.4.1.2 | ColumnrcMplsLdpPathRemotePeerAddrType | not-accessible | current | This is the type of the path address. |
| 1.3.6.1.4.1.2272.1.74.1.1.3.4.1.3 | ColumnrcMplsLdpPathRemotePeerAddrPrefixLength | not-accessible | current | This is the path address prefix length. |
| 1.3.6.1.4.1.2272.1.74.1.1.3.4.1.4 | ColumnrcMplsLdpPathRemotePeerAddr | not-accessible | current | This is the path address. |
| 1.3.6.1.4.1.2272.1.74.1.1.3.4.1.5 | ColumnrcMplsLdpPathRemotePeerId | not-accessible | current | This is the Id of the remote peer of the path. |
| 1.3.6.1.4.1.2272.1.74.1.1.3.4.1.6 | ColumnrcMplsLdpPathRemotePeerLdpId | read-only | current | This is the LDP Id of the remote peer of the path. |
| 1.3.6.1.4.1.2272.1.74.1.1.3.4.1.7 | ColumnrcMplsLdpPathRemotePeerOutLabel | read-only | current | This is the Out Label for this instance of the Remote Peer Id. |
| 1.3.6.1.4.1.2272.1.74.1.1.3.4.1.8 | ColumnrcMplsLdpPathRemotePeerState | read-only | current | This is the state of the remote peer. |
| 1.3.6.1.4.1.2272.1.74.1.1.3.5 | TablercMplsLdpRouteTable | not-accessible | current | This is the table of mpls ldp routes. |
| 1.3.6.1.4.1.2272.1.74.1.1.3.5.1 | RowrcMplsLdpRouteEntry | not-accessible | current | An entry in the mpls ldp route table. |
| 1.3.6.1.4.1.2272.1.74.1.1.3.5.1.1 | ColumnrcMplsLdpRouteType | not-accessible | current | This is the route type. ATG_NHR_LDP_FEC_TYPE_NONE 0 ATG_NHR_LDP_FEC_TYPE_HOST 1 ATG_NHR_LDP_FEC_TYPE_PREFIX 2 ATG_NHR_LDP_FEC_TYPE_VC 3 ATG_NHR_LDP_FEC_TYPE_VC… |
| 1.3.6.1.4.1.2272.1.74.1.1.3.5.1.2 | ColumnrcMplsLdpRouteAddrType | not-accessible | current | This is the route address prefix length. |
| 1.3.6.1.4.1.2272.1.74.1.1.3.5.1.3 | ColumnrcMplsLdpRouteAddrPrefixLength | not-accessible | current | This is the route address prefix length. |
| 1.3.6.1.4.1.2272.1.74.1.1.3.5.1.4 | ColumnrcMplsLdpRouteAddr | not-accessible | current | This is the route address. |
| 1.3.6.1.4.1.2272.1.74.1.1.3.5.1.5 | ColumnrcMplsLdpRouteIfIndex | read-only | current | This is the interface index of the route entry. |
| 1.3.6.1.4.1.2272.1.74.1.1.3.5.1.6 | ColumnrcMplsLdpRouteNextHopAddrType | read-only | current | This is the address type of the next hop. |
| 1.3.6.1.4.1.2272.1.74.1.1.3.5.1.7 | ColumnrcMplsLdpRouteNextHopAddr | read-only | current | This is the address of the next hop. |
| 1.3.6.1.4.1.2272.1.74.1.1.3.6 | TablercMplsLdpSessionTable | not-accessible | current | This is the table of mpls ldp sessions. |
| 1.3.6.1.4.1.2272.1.74.1.1.3.6.1 | RowrcMplsLdpSessionEntry | not-accessible | current | An entry in the mpls ldp session table. |
| 1.3.6.1.4.1.2272.1.74.1.1.3.6.1.1 | ColumnrcMplsLdpSessionEntityLdpId | not-accessible | current | This is the entity LDP ID for the session. |
| 1.3.6.1.4.1.2272.1.74.1.1.3.6.1.2 | ColumnrcMplsLdpSessionEntityIndex | not-accessible | current | This is the entity LDP ID for the session. |
| 1.3.6.1.4.1.2272.1.74.1.1.3.6.1.3 | ColumnrcMplsLdpSessionPeerLdpId | not-accessible | current | This is the peer LDP ID for the session. |
| 1.3.6.1.4.1.2272.1.74.1.1.3.6.1.4 | ColumnrcMplsLdpSessionStateLastChange | read-only | current | The time this Session entered its current state as denoted by the rcMplsLdpSessionState object. |
| 1.3.6.1.4.1.2272.1.74.1.1.3.6.1.5 | ColumnrcMplsLdpSessionState | read-only | current | The current state of the session, all of the states 1 to 5 are based on the state machine for session negotiation behavior 1- nonexistent, 2- initialized, 3- o… |
| 1.3.6.1.4.1.2272.1.74.1.1.3.6.1.6 | ColumnrcMplsLdpSessionRole | read-only | current | During session establishment the LSR/LER takes either the active role or the passive role based on address comparisons. This object indicates whether this LSR/… |
| 1.3.6.1.4.1.2272.1.74.1.1.3.6.1.7 | ColumnrcMplsLdpSessionProtocolVersion | read-only | current | This is the protocol version. |
| 1.3.6.1.4.1.2272.1.74.1.1.3.6.1.8 | ColumnrcMplsLdpSessionKeepAliveHoldTimeRem | read-only | current | This is the session keep alive hold time remaining. |
| 1.3.6.1.4.1.2272.1.74.1.1.3.6.1.9 | ColumnrcMplsLdpSessionKeepAliveTime | read-only | current | This is the session keep alive time. |
| 1.3.6.1.4.1.2272.1.74.1.1.3.6.1.10 | ColumnrcMplsLdpSessionMaxPduLength | read-only | current | This is the session's max pdu length. |
| 1.3.6.1.4.1.2272.1.74.1.1.3.6.1.11 | ColumnrcMplsLdpSessionDiscontinuityTime | read-only | current | This is the session's discontinuity time. |
| 1.3.6.1.4.1.2272.1.74.1.1.3.6.1.12 | ColumnrcMplsLdpSessionHoldTime | read-only | current | This is the session's hold time. |
| 1.3.6.1.4.1.2272.1.74.1.1.3.6.1.13 | ColumnrcMplsLdpSessionUpTime | read-only | current | This is the session's up time. |
| 1.3.6.1.4.1.2272.1.74.1.1.3.6.1.14 | ColumnrcMplsLdpSessionMessagesSent | read-only | current | This is the session total messages sent. |
| 1.3.6.1.4.1.2272.1.74.1.1.3.6.1.15 | ColumnrcMplsLdpSessionMessagesRecv | read-only | current | This is the session total messages received. |
| 1.3.6.1.4.1.2272.1.74.1.1.3.7 | TablercMplsLdpInterfaceTable | not-accessible | current | This is the table of mpls ldp interface. |
| 1.3.6.1.4.1.2272.1.74.1.1.3.7.1 | RowrcMplsLdpInterfaceEntry | not-accessible | current | An entry in the mpls ldp interface table. |
| 1.3.6.1.4.1.2272.1.74.1.1.3.7.1.1 | ColumnrcMplsLdpInterfaceIfIndex | not-accessible | current | This is the LDP interface if index. |
| 1.3.6.1.4.1.2272.1.74.1.1.3.7.1.2 | ColumnrcMplsLdpInterfaceNbrCount | read-only | current | This is the number of neighbors. |
| 1.3.6.1.4.1.2272.1.74.1.1.3.7.1.3 | ColumnrcMplsLdpInterfaceNextHello | read-only | current | This is the next hello time. |
| 1.3.6.1.4.1.2272.1.74.1.1.3.7.1.4 | ColumnrcMplsLdpInterfaceConfHoldTime | read-only | current | This is the configured hello hold time. |
| 1.3.6.1.4.1.2272.1.74.1.1.3.7.1.5 | ColumnrcMplsLdpInterfaceNegHoldTime | read-only | current | This is the negotiated hello hold time. |
| 1.3.6.1.4.1.2272.1.74.1.1.3.7.1.6 | ColumnrcMplsLdpInterfaceHelloInterval | read-only | current | This is one third of the negotiated hello hold time. |
| 1.3.6.1.4.1.2272.1.74.1.1.3.8 | TablercMplsLdpStatsTable | not-accessible | current | This is the table of mpls ldp statistics. |
| 1.3.6.1.4.1.2272.1.74.1.1.3.8.1 | RowrcMplsLdpStatsEntry | not-accessible | current | An entry in the mpls ldp statistics table. |
| 1.3.6.1.4.1.2272.1.74.1.1.3.8.1.1 | ColumnrcMplsLdpStatsPeerAddress | not-accessible | current | This is the LDP Peer Address key for search. This value can be a valid peer address or 0.0.0.0. If 0.0.0.0 then global LDP statistics are retrieved. |
| 1.3.6.1.4.1.2272.1.74.1.1.3.8.1.2 | ColumnrcMplsLdpStatsNotifyRecv | read-only | current | This is the count of notifications received. |
| 1.3.6.1.4.1.2272.1.74.1.1.3.8.1.3 | ColumnrcMplsLdpStatsNotifySent | read-only | current | This is the count of notifications sent. |
| 1.3.6.1.4.1.2272.1.74.1.1.3.8.1.4 | ColumnrcMplsLdpStatsHelloRecv | read-only | current | This is the count of hellos received. |
| 1.3.6.1.4.1.2272.1.74.1.1.3.8.1.5 | ColumnrcMplsLdpStatsHelloSent | read-only | current | This is the count of hellos sent. |
| 1.3.6.1.4.1.2272.1.74.1.1.3.8.1.6 | ColumnrcMplsLdpStatsInitRecv | read-only | current | This is the count of initializations received. |
| 1.3.6.1.4.1.2272.1.74.1.1.3.8.1.7 | ColumnrcMplsLdpStatsInitSent | read-only | current | This is the count of initializations sent. |
| 1.3.6.1.4.1.2272.1.74.1.1.3.8.1.8 | ColumnrcMplsLdpStatsKeepRecv | read-only | current | This is the count of keep alives received. |
| 1.3.6.1.4.1.2272.1.74.1.1.3.8.1.9 | ColumnrcMplsLdpStatsKeepSent | read-only | current | This is the count of keep alives sent. |
| 1.3.6.1.4.1.2272.1.74.1.1.3.8.1.10 | ColumnrcMplsLdpStatsAddrRecv | read-only | current | This is the count of addrs received. |
| 1.3.6.1.4.1.2272.1.74.1.1.3.8.1.11 | ColumnrcMplsLdpStatsAddrSent | read-only | current | This is the count of addrs sent. |
| 1.3.6.1.4.1.2272.1.74.1.1.3.8.1.12 | ColumnrcMplsLdpStatsAddrWdrRecv | read-only | current | This is the count of addr withdraws received. |
| 1.3.6.1.4.1.2272.1.74.1.1.3.8.1.13 | ColumnrcMplsLdpStatsAddrWdrSent | read-only | current | This is the count of addr withdraws sent. |
| 1.3.6.1.4.1.2272.1.74.1.1.3.8.1.14 | ColumnrcMplsLdpStatsLabelMapRecv | read-only | current | This is the count of label maps received. |
| 1.3.6.1.4.1.2272.1.74.1.1.3.8.1.15 | ColumnrcMplsLdpStatsLabelMapSent | read-only | current | This is the count of label maps sent. |
| 1.3.6.1.4.1.2272.1.74.1.1.3.8.1.16 | ColumnrcMplsLdpStatsLabelReqRecv | read-only | current | This is the count of label reqs received. |
| 1.3.6.1.4.1.2272.1.74.1.1.3.8.1.17 | ColumnrcMplsLdpStatsLabelReqSent | read-only | current | This is the count of label reqs sent. |
| 1.3.6.1.4.1.2272.1.74.1.1.3.8.1.18 | ColumnrcMplsLdpStatsLabelWdrRecv | read-only | current | This is the count of label withdraws received. |
| 1.3.6.1.4.1.2272.1.74.1.1.3.8.1.19 | ColumnrcMplsLdpStatsLabelWdrSent | read-only | current | This is the count of label withdraws sent. |
| 1.3.6.1.4.1.2272.1.74.1.1.3.8.1.20 | ColumnrcMplsLdpStatsLabelRelRecv | read-only | current | This is the count of label withdraws received. |
| 1.3.6.1.4.1.2272.1.74.1.1.3.8.1.21 | ColumnrcMplsLdpStatsLabelRelSent | read-only | current | This is the count of label withdraws sent. |
| 1.3.6.1.4.1.2272.1.74.1.1.3.8.1.22 | ColumnrcMplsLdpStatsLabelAbrRecv | read-only | current | This is the count of label aborts received. |
| 1.3.6.1.4.1.2272.1.74.1.1.3.8.1.23 | ColumnrcMplsLdpStatsLabelAbrSent | read-only | current | This is the count of label aborts sent. |
| 1.3.6.1.4.1.2272.1.74.1.1.3.8.1.24 | ColumnrcMplsLdpStatsSessionUp | read-only | current | This is the count of session up. |
| 1.3.6.1.4.1.2272.1.74.1.1.3.8.1.25 | ColumnrcMplsLdpStatsSessionDown | read-only | current | This is the count of session down. |
| 1.3.6.1.4.1.2272.1.74.1.1.3.8.1.26 | ColumnrcMplsLdpStatsBadLdpIdentifierErrors | read-only | current | This is the count of bad LDP ID errors. |
| 1.3.6.1.4.1.2272.1.74.1.1.3.8.1.27 | ColumnrcMplsLdpStatsBadPduLengthErrors | read-only | current | This is the count of Bad PDU length errors. |
| 1.3.6.1.4.1.2272.1.74.1.1.3.8.1.28 | ColumnrcMplsLdpStatsBadMessageLengthErrors | read-only | current | This is the count of bad message length errors. |
| 1.3.6.1.4.1.2272.1.74.1.1.3.8.1.29 | ColumnrcMplsLdpStatsUnknownMessageErrors | read-only | current | This is the count of unknown message errors. |
| 1.3.6.1.4.1.2272.1.74.1.1.3.8.1.30 | ColumnrcMplsLdpStatsUnknownTlvErrors | read-only | current | This is the count of unknown TLV errors. |
| 1.3.6.1.4.1.2272.1.74.1.1.3.8.1.31 | ColumnrcMplsLdpStatsBadTlvLengthErrors | read-only | current | This is the count of bad TLV Length errors. |
| 1.3.6.1.4.1.2272.1.74.1.1.3.8.1.32 | ColumnrcMplsLdpStatsMalformedTlvValueErrors | read-only | current | This is the count of Malinformed TLV value errors. |
| 1.3.6.1.4.1.2272.1.74.1.1.3.8.1.33 | ColumnrcMplsLdpStatsHoldTimerExpErrors | read-only | current | This is the count of hold time expired errors. |
| 1.3.6.1.4.1.2272.1.74.1.1.3.8.1.34 | ColumnrcMplsLdpStatsSessionRejectedNoHelloErrors | read-only | current | This is the count of session reject - no hello errors. |
| 1.3.6.1.4.1.2272.1.74.1.1.3.8.1.35 | ColumnrcMplsLdpStatsSessionRejectedBadParmAdvErrors | read-only | current | This is the count of session reject - bad parameter advertisement errors. |
| 1.3.6.1.4.1.2272.1.74.1.1.3.8.1.36 | ColumnrcMplsLdpStatsSessionRejectedMaxPduErrors | read-only | current | This is the count of session reject - Max PDU Errors. |
| 1.3.6.1.4.1.2272.1.74.1.1.3.8.1.37 | ColumnrcMplsLdpStatsSessionRejectedBadLabelRangeErrors | read-only | current | This is the count of session reject - Bad Label Range errors. |
| 1.3.6.1.4.1.2272.1.74.1.1.3.8.1.38 | ColumnrcMplsLdpStatsSessionRejectedSetupAbortErrors | read-only | current | This is the count of session reject - Setup Abort errors. |
| 1.3.6.1.4.1.2272.1.74.1.1.3.8.1.39 | ColumnrcMplsLdpStatsSessionRejectedBadKeepaliveErrors | read-only | current | This is the count of session reject - Bad Keepalive Errors. |
| 1.3.6.1.4.1.2272.1.74.1.1.3.8.1.40 | ColumnrcMplsLdpStatsSessionOtherErrors | read-only | current | This is the count of other errors. |
| 1.3.6.1.4.1.2272.1.74.1.1.3.8.1.41 | ColumnrcMplsLdpStatsClear | read-write | current | Clear LDP Statistics for the Peer. |
| 1.3.6.1.4.1.2272.1.74.1.2 | NodercMplsNotificationObjects | |||
| 1.3.6.1.4.1.2272.1.74.1.2.1 | ScalarrcMplsLdpStatusNotificationEnable | read-write | current | If this object is true, then it enables the generation of LDP Session Up or Down Traps, otherwise these traps are not emitted. |
| 1.3.6.1.4.1.2272.1.74.1.2.2 | ScalarrcMplsLdpSessionThresholdNotificationEnable | read-write | current | If this object is true, then it enables the generation of LDP Session Threshold Exceeded Traps, otherwise these traps are not emitted. |
| 1.3.6.1.4.1.2272.1.74.1.2.3 | ScalarrcMplsLdpPathVectorLimitNotificationEnable | read-write | current | If this object is true, then it enables the generation of LDP Path Vector Limit Exceeded Traps, otherwise these traps are not emitted. |
| 1.3.6.1.4.1.2272.1.75 | NodercPim | |||
| 1.3.6.1.4.1.2272.1.76 | NodercIpMRoute | |||
| 1.3.6.1.4.1.2272.1.76.1 | NodercIpMRouteMIBObjects | |||
| 1.3.6.1.4.1.2272.1.76.1.1 | NodercIpMRouteScalars | |||
| 1.3.6.1.4.1.2272.1.76.1.1.2 | ScalarrcIpMRouteStatsEnabled | read-write | current | The enabled status of IP Multicast statistics. |
| 1.3.6.1.4.1.2272.1.76.1.1.3 | ScalarrcIpMRouteStatsClear | read-write | current | Clear ip mroute stats. |
| 1.3.6.1.4.1.2272.1.76.1.6 | TablercIpMRouteStatsTable | not-accessible | current | the table containing IP Multicast statistics. |
| 1.3.6.1.4.1.2272.1.76.1.6.1 | RowrcIpMRouteStatsEntry | not-accessible | current | An entry containing the ip multicast statistics information for the specific group ip address. |
| 1.3.6.1.4.1.2272.1.76.1.6.1.1 | ColumnrcIpMRouteStatsGroupAddress | not-accessible | current | the IP multicast group address for which this entry contains ip multicast statistics. |
| 1.3.6.1.4.1.2272.1.76.1.6.1.2 | ColumnrcIpMRouteStatsSourceCount | read-only | current | The number of sources corresponding to the specific group and vrf. |
| 1.3.6.1.4.1.2272.1.76.1.6.1.3 | ColumnrcIpMRouteStatsPkts | read-only | current | The total number of frames that are processed corresponding to the specific group and vrf. |
| 1.3.6.1.4.1.2272.1.76.1.6.1.4 | ColumnrcIpMRouteStatsBytes | read-only | current | The total number of bytes that are processed corresponding to the specific group and vrf. |
| 1.3.6.1.4.1.2272.1.76.1.6.1.5 | ColumnrcIpMRouteStatsAverageSizePerPkt | read-only | current | The average length of packets that are processed corresponding to the specific group and vrf. |
| 1.3.6.1.4.1.2272.1.76.1.6.1.6 | ColumnrcIpMRouteStatsDropPkts | read-only | current | The total number of drop frames that are processed corresponding to the specific group and vrf. |
| 1.3.6.1.4.1.2272.1.76.1.6.1.7 | ColumnrcIpMRouteStatsDropBytes | read-only | current | The total number of drop bytes that are processed corresponding to the specific group and vrf. |
| 1.3.6.1.4.1.2272.1.76.1.6.1.8 | ColumnrcIpMRouteStatsPktsPerSecond | read-only | current | The number of packets that are processed corresponding to the specific group and vrf in one second. |
| 1.3.6.1.4.1.2272.1.77 | NodercCsu | |||
| 1.3.6.1.4.1.2272.1.77.1 | NodercCsuGlobal | |||
| 1.3.6.1.4.1.2272.1.77.1.1 | ScalarrcCsuGlobalStartUpMode | read-only | current | Mode of CSU StartUp(Manual/Auto/None). None may not be used |
| 1.3.6.1.4.1.2272.1.77.2 | TablercCsuInfoTable | not-accessible | current | Table of CSU Info Entries. |
| 1.3.6.1.4.1.2272.1.77.2.1 | RowrcCsuInfoEntry | not-accessible | current | CSU Info Table Entry. |
| 1.3.6.1.4.1.2272.1.77.2.1.1 | ColumnrcCsuInfoSlotNumber | not-accessible | current | Value of the slot number. |
| 1.3.6.1.4.1.2272.1.77.2.1.2 | ColumnrcCsuInfoTypeOfCard | read-only | current | Integer holding the card type. |
| 1.3.6.1.4.1.2272.1.77.2.1.3 | ColumnrcCsuInfoTypeOfCardDesc | read-only | current | The type of card present in the current slot. |
| 1.3.6.1.4.1.2272.1.77.2.1.4 | ColumnrcCsuInfoUpgradeStatus | read-only | current | The Upgrade Status of the card. |
| 1.3.6.1.4.1.2272.1.77.2.1.5 | ColumnrcCsuInfoUpgradeStartTime | read-only | current | Timestamp of the upgrade start time. |
| 1.3.6.1.4.1.2272.1.77.2.1.6 | ColumnrcCsuInfoUpgradeEndTime | read-only | current | Timestamp of the upgrade end time. |
| 1.3.6.1.4.1.2272.1.78 | NodercPlsb | |||
| 1.3.6.1.4.1.2272.1.78.1 | NodercPlsbGlobal | |||
| 1.3.6.1.4.1.2272.1.78.1.1 | ScalarrcPlsbGlobalVlans | read-write | current | PLSB vlan entry. |
| 1.3.6.1.4.1.2272.1.78.1.2 | ScalarrcPlsbGlobalEnable | read-write | current | Enable/Disable PLSB global flag. |
| 1.3.6.1.4.1.2272.1.78.1.3 | ScalarrcPlsbGlobalMsti | read-write | current | MSTI instance ID for PLSB VLANS |
| 1.3.6.1.4.1.2272.1.78.1.4 | ScalarrcPlsbGlobalEtherType | read-write | current | SPBM Ethertype |
| 1.3.6.1.4.1.2272.1.79 | NodercCoreDump | |||
| 1.3.6.1.4.1.2272.1.79.1 | NodercCoreDumpGlobal | |||
| 1.3.6.1.4.1.2272.1.79.1.1 | ScalarrcCoreDumpGlobalCoreDumpEnable | read-write | current | Enable/disable the Core dump functionality |
| 1.3.6.1.4.1.2272.1.79.1.2 | ScalarrcCoreDumpGlobalCoreDumpDirectory | read-write | current | Core dump create directory. This specifies the directory in which the core dump files is created. The core dump is created in PCMCIA, the path should contain /… |
| 1.3.6.1.4.1.2272.1.80 | NodercMsdp | |||
| 1.3.6.1.4.1.2272.1.80.1 | NodercMsdpMib | |||
| 1.3.6.1.4.1.2272.1.80.1.0 | NodercMsdpNotifications | |||
| 1.3.6.1.4.1.2272.1.80.1.0.1 | NotificationrcnMsdpMaxSACacheWarnSet | current | This event is generated when the SA entries in the cache database exceeds 85 % of maximum value (6K) in local cache or in foreign cache. | |
| 1.3.6.1.4.1.2272.1.80.1.0.2 | NotificationrcnMsdpMaxSACacheWarnClear | current | This event is generated when the Sa entries in the cache database drops to 80 % of the maximum value (6K). | |
| 1.3.6.1.4.1.2272.1.80.1.0.3 | NotificationrcnMsdpMaxSACacheErrorSet | current | This event is generated when the SA entries in the cache database hits 100 % of the maximum value (6K). | |
| 1.3.6.1.4.1.2272.1.80.1.0.4 | NotificationrcnMsdpMaxSACacheErrorClear | current | This event is generated when the SA entries in the cache database drops to 95% of the maximum value. | |
| 1.3.6.1.4.1.2272.1.80.1.0.5 | NotificationrcnMsdpMaxPeerSACacheWarnSet | current | This event is generated when the SA entries for this peer exceeds 85 % of maximum value configured for this peer. | |
| 1.3.6.1.4.1.2272.1.80.1.0.6 | NotificationrcnMsdpMaxPeerSACacheWarnClear | current | This event is generated when the SA entries for this peer drops to 80 % of the maximum value configured for this peer. | |
| 1.3.6.1.4.1.2272.1.80.1.0.7 | NotificationrcnMsdpMaxPeerSACacheErrorSet | current | This event is generated when the SA entries for this peer hits 100 % of the peer SA limit. | |
| 1.3.6.1.4.1.2272.1.80.1.0.8 | NotificationrcnMsdpMaxPeerSACacheErrorClear | current | This event is generated when the SA entries for this peer drops to 95% of the peer SA limit. | |
| 1.3.6.1.4.1.2272.1.80.1.0.9 | NotificationrcnMsdpEstablished | current | The MSDP Established event is generated when the MSDP FSM enters the ESTABLISHED state. | |
| 1.3.6.1.4.1.2272.1.80.1.0.10 | NotificationrcnMsdpBackwardTransition | current | The MSDPBackwardTransition Event is generated when the MSDP FSM moves from a higher-numbered state to a lower-numbered state. | |
| 1.3.6.1.4.1.2272.1.80.1.1 | NodercMsdpObjects | |||
| 1.3.6.1.4.1.2272.1.80.1.1.1 | NodercMsdpScalars | |||
| 1.3.6.1.4.1.2272.1.80.1.1.1.1 | ScalarrcMsdpRouteMapName | read-write | current | Route map name. Transmit only the SA messages that meet the match criteria in the route map name with a permit keyword. It is used as the policy of the redistr… |
| 1.3.6.1.4.1.2272.1.80.1.1.1.2 | ScalarrcMsdpRedistributeFilterEnabled | read-write | current | To enable or disable the redistribute filter. This filter is used to filter the (S,G,RP) entries provided by PIM to MSDP. |
| 1.3.6.1.4.1.2272.1.80.1.1.1.3 | ScalarrcMsdpRedistributeFilterApply | read-write | current | Each time when making changes to the redistribute filter, it will not take effect until it is applied. |
| 1.3.6.1.4.1.2272.1.80.1.1.1.4 | ScalarrcMsdpImplicitDefaultPeerEnabled | read-write | current | To enable or disable the implicit default peer of MSDP. If enabled,it will accept SA messages even if the Peer RPF(Reverse Path Forwarding) rules fails, condit… |
| 1.3.6.1.4.1.2272.1.80.1.1.1.5 | ScalarrcMsdpSACacheStatsClear | read-write | obsolete | Clear foreign SA-Cache entries. |
| 1.3.6.1.4.1.2272.1.80.1.1.1.6 | ScalarrcMsdpSACacheClear | read-write | current | Clear foreign SA-Cache entries. |
| 1.3.6.1.4.1.2272.1.80.1.1.1.7 | ScalarrcMsdpStatsClear | read-write | current | Clear msdp statistics. |
| 1.3.6.1.4.1.2272.1.80.1.1.2 | TablercMsdpPeerTable | not-accessible | current | A table that augments the management information in the standard IETF msdpPeerTable. |
| 1.3.6.1.4.1.2272.1.80.1.1.2.1 | RowrcMsdpPeerEntry | not-accessible | current | A set of additional management information augmenting that of the standard IETF msdpPeerEntry. |
| 1.3.6.1.4.1.2272.1.80.1.1.2.1.1 | ColumnrcMsdpPeerAsNumber | read-create | deprecated | The AS number of the remote Peer. Value -1 indicates that AS number is not configured. This is deprecated by rcMsdpPeer4ByteAsNumber. |
| 1.3.6.1.4.1.2272.1.80.1.1.2.1.2 | ColumnrcMsdpPeerTooShortMessages | read-only | current | The number of Short messages received from this peer. |
| 1.3.6.1.4.1.2272.1.80.1.1.2.1.3 | ColumnrcMsdpPeerInBadMessages | read-only | current | The number of Bad MSDP messages received from this peer. |
| 1.3.6.1.4.1.2272.1.80.1.1.2.1.4 | ColumnrcMsdpPeerInKeepAliveMessages | read-only | current | The number of keep alive messages received from this peer. |
| 1.3.6.1.4.1.2272.1.80.1.1.2.1.5 | ColumnrcMsdpPeerOutKeepAliveMessages | read-only | current | The number of keep alive messages transmitted to this peer. |
| 1.3.6.1.4.1.2272.1.80.1.1.2.1.6 | ColumnrcMsdpPeerInSAFilterEnabled | read-write | current | To enable or disable the in SA filter of a peer. |
| 1.3.6.1.4.1.2272.1.80.1.1.2.1.7 | ColumnrcMsdpPeerInSAFilterRouteMapName | read-write | current | The route Map name of IN SA Filter. If route map name is configured, it Accepts only the SA messages that meet the match criteria in the route map map-name wit… |
| 1.3.6.1.4.1.2272.1.80.1.1.2.1.8 | ColumnrcMsdpPeerOutSAFilterEnabled | read-write | current | To enable or disable the out SA filter of a peer. |
| 1.3.6.1.4.1.2272.1.80.1.1.2.1.9 | ColumnrcMsdpPeerOutSAFilterRouteMapName | read-write | current | The route Map name of OUT SA Filter. If route map name is configured, it sends only the SA messages that meet the match criteria in the route map map-name with… |
| 1.3.6.1.4.1.2272.1.80.1.1.2.1.10 | ColumnrcMsdpPeerDescription | read-write | current | Peer specific description. It is used to make the peer easier to be identified. |
| 1.3.6.1.4.1.2272.1.80.1.1.2.1.11 | ColumnrcMsdpPeerSALimit | read-write | current | The SA Cache limit for this peer. |
| 1.3.6.1.4.1.2272.1.80.1.1.2.1.12 | ColumnrcMsdpPeerMd5AuthEnabled | read-write | current | The MD5 Authentication status of this peer. |
| 1.3.6.1.4.1.2272.1.80.1.1.2.1.13 | ColumnrcMsdpPeerMd5AuthPassword | read-write | current | The MD5 Authentication password of this peer. |
| 1.3.6.1.4.1.2272.1.80.1.1.2.1.14 | ColumnrcMsdpPeerSAsLearnedFromThisPeer | read-only | current | The total number of SAs learned from this peer. |
| 1.3.6.1.4.1.2272.1.80.1.1.2.1.15 | ColumnrcMsdpPeerSAsAdvertisedToThisPeer | read-only | current | The total number of SAs advertised to this peer. |
| 1.3.6.1.4.1.2272.1.80.1.1.2.1.16 | ColumnrcMsdpPeerUpOrDownTime | read-only | current | MSDP Peer Up or Down duration. |
| 1.3.6.1.4.1.2272.1.80.1.1.2.1.17 | ColumnrcMsdpPeerConnAndStatsClearedTime | read-only | current | The duration of connection and statistics cleared ago. |
| 1.3.6.1.4.1.2272.1.80.1.1.2.1.18 | ColumnrcMsdpPeerRouteMapName | read-create | current | Route map name for default peer. |
| 1.3.6.1.4.1.2272.1.80.1.1.2.1.19 | ColumnrcMsdpPeerAdminEnabled | read-write | current | The admin status of this peer. |
| 1.3.6.1.4.1.2272.1.80.1.1.2.1.20 | ColumnrcMsdpPeerOperEnabled | read-only | current | The operational status of this peer. |
| 1.3.6.1.4.1.2272.1.80.1.1.2.1.21 | ColumnrcMsdpPeerDefaultPeerState | read-only | current | The default peer has two state: Configured and Operational. MSDP node only accept SA messages from the Operational default peer. These is only one default peer… |
| 1.3.6.1.4.1.2272.1.80.1.1.2.1.22 | ColumnrcMsdpPeerDefaultPeer | read-create | current | It is used to indicate whether a peer is a default peer or not. |
| 1.3.6.1.4.1.2272.1.80.1.1.2.1.23 | ColumnrcMsdpPeerClearPeer | read-write | current | It is an operational object. It is used to determine whether the TCP connection for the specified peer will be cleared or not. The returned value will be alway… |
| 1.3.6.1.4.1.2272.1.80.1.1.2.1.24 | ColumnrcMsdpPeer4ByteAsNumber | read-write | current | The AS number of the remote Peer. The value of the default AS number is 0. This object replaces rcMsdpPeerAsNumber. |
| 1.3.6.1.4.1.2272.1.80.1.1.3 | TablercMsdpSACacheTable | not-accessible | current | SA (Source Active) - Cache Table. This table contains foreign as well as local SA Cache entries. Foreign SA Cache entries from this table will have correspondi… |
| 1.3.6.1.4.1.2272.1.80.1.1.3.1 | RowrcMsdpSACacheEntry | not-accessible | current | SA Cache Entry. |
| 1.3.6.1.4.1.2272.1.80.1.1.3.1.1 | ColumnrcMsdpSACacheGroupAddr | not-accessible | current | The group address of the SA Cache entry. |
| 1.3.6.1.4.1.2272.1.80.1.1.3.1.2 | ColumnrcMsdpSACacheSourceAddr | not-accessible | current | The source address of the SA Cache entry. |
| 1.3.6.1.4.1.2272.1.80.1.1.3.1.3 | ColumnrcMsdpSACacheOriginRP | not-accessible | current | The RP of the SA Cache entry. This field is in the INDEX in order to catch multiple RP's advertising the same source and group. |
| 1.3.6.1.4.1.2272.1.80.1.1.3.1.4 | ColumnrcMsdpSACacheTypeInformation | not-accessible | current | This object describes the SA cache type. It can be either local cache or foreign cache. |
| 1.3.6.1.4.1.2272.1.80.1.1.3.1.5 | ColumnrcMsdpSACacheOriginatorAsNumber | read-only | current | The AS number of the originator. |
| 1.3.6.1.4.1.2272.1.80.1.1.3.1.6 | ColumnrcMsdpSACacheRouteType | read-only | current | The owner of the route that is used for rpf checking. |
| 1.3.6.1.4.1.2272.1.80.1.1.4 | TablercMsdpSACacheRecordsTable | not-accessible | current | SA (Source Active) - Cache Records Table. This table contains foreign as well as local SA Cache entries. Foreign SA Cache entries from this table will have cor… |
| 1.3.6.1.4.1.2272.1.80.1.1.4.1 | RowrcMsdpSACacheRecordsEntry | not-accessible | current | SA Cache Entry. |
| 1.3.6.1.4.1.2272.1.80.1.1.4.1.1 | ColumnrcMsdpSACacheRecordsTypeInformation | not-accessible | current | This object describes the SA cache type. It can be either local cache or foreign cache. |
| 1.3.6.1.4.1.2272.1.80.1.1.4.1.2 | ColumnrcMsdpSACacheRecordsGroupAddr | not-accessible | current | The group address of the SA Cache entry. |
| 1.3.6.1.4.1.2272.1.80.1.1.4.1.3 | ColumnrcMsdpSACacheRecordsSourceAddr | not-accessible | current | The source address of the SA Cache entry. |
| 1.3.6.1.4.1.2272.1.80.1.1.4.1.4 | ColumnrcMsdpSACacheRecordsOriginRP | not-accessible | current | The RP of the SA Cache entry. This field is in the INDEX in order to catch multiple RP's advertising the same source and group. |
| 1.3.6.1.4.1.2272.1.80.1.1.4.1.5 | ColumnrcMsdpSACacheRecordsOriginatorAsNumber | read-only | obsolete | The AS number of the originator. This attribute is obsoleted. |
| 1.3.6.1.4.1.2272.1.80.1.1.4.1.6 | ColumnrcMsdpSACacheRecordsRouteType | read-only | current | The owner of the route that is used for rpf checking. |
| 1.3.6.1.4.1.2272.1.80.1.1.4.1.7 | ColumnrcMsdpSACacheRecordsOriginatorAsNum | read-only | current | The AS number of the originator. This object is used to obsolete rcMsdpSACacheRecordsOriginatorAsNumber. Value -1 indicates that AS number is not configured. |
| 1.3.6.1.4.1.2272.1.80.1.2 | NodercMsdpNotificationObjects | |||
| 1.3.6.1.4.1.2272.1.80.1.2.1 | ScalarrcMsdpSACacheType | accessible-for-notify | current | This object describes the SA cache type. |
| 1.3.6.1.4.1.2272.1.80.1.2.2 | ScalarrcMsdpVrfId | accessible-for-notify | current | VRF ID for the MSDP. |
| 1.3.6.1.4.1.2272.1.81 | NodercBfd | |||
| 1.3.6.1.4.1.2272.1.81.1 | NodercBfdTmpMib | |||
| 1.3.6.1.4.1.2272.1.81.1.0 | NodercBfdTmpNotifications | |||
| 1.3.6.1.4.1.2272.1.81.1.0.1 | NotificationrcBfdTmpSessUp | current | This notification is generated when the bfdSessState object for one or more contiguous entries in bfdSessTable are about to enter the up(2) state from some oth… | |
| 1.3.6.1.4.1.2272.1.81.1.0.2 | NotificationrcBfdTmpSessDown | current | This notification is generated when the bfdSessState object for one or more contiguous entries in bfdSessTable are about to enter the down(4) or adminDown(5) s… | |
| 1.3.6.1.4.1.2272.1.81.1.1 | NodercBfdTmpObjects | |||
| 1.3.6.1.4.1.2272.1.81.1.1.1 | NodercBfdTmpScalarObjects | |||
| 1.3.6.1.4.1.2272.1.81.1.1.1.1 | ScalarrcBfdTmpAdminStatus | read-write | current | The global administrative status of BFD in this router. The value 'enabled' denotes that the BFD Process is active on at least one interface; 'disabled' disabl… |
| 1.3.6.1.4.1.2272.1.81.1.1.1.3 | ScalarrcBfdTmpVersionNumber | read-only | current | The current version number of the BFD protocol. |
| 1.3.6.1.4.1.2272.1.81.1.1.1.4 | ScalarrcBfdTmpSessNotificationsEnable | read-write | current | If this object is set to true(1), then it enables the emission of bfdSessUp and bfdSessDown notifications; otherwise these notifications are not emitted. |
| 1.3.6.1.4.1.2272.1.81.1.1.2 | TablercBfdTmpSessTable | not-accessible | current | The BFD Session Table describes the BFD sessions. |
| 1.3.6.1.4.1.2272.1.81.1.1.2.1 | RowrcBfdTmpSessEntry | not-accessible | current | The BFD Session Entry describes BFD session. |
| 1.3.6.1.4.1.2272.1.81.1.1.2.1.1 | ColumnrcBfdTmpSessIndex | not-accessible | current | This object contains an index used to represent a unique BFD session on this device. |
| 1.3.6.1.4.1.2272.1.81.1.1.2.1.2 | ColumnrcBfdTmpSessApplicationId | read-only | current | This object contains an index used to indicate a local application which owns or maintains this BFD session. For instance, the MPLS VPN process may maintain a … |
| 1.3.6.1.4.1.2272.1.81.1.1.2.1.3 | ColumnrcBfdTmpSessDiscriminator | read-only | current | This object specifies the local discriminator for this BFD session, used to uniquely identify it. |
| 1.3.6.1.4.1.2272.1.81.1.1.2.1.4 | ColumnrcBfdTmpSessRemoteDiscr | read-only | current | This object specifies the session discriminator chosen by the remote system for this BFD session. |
| 1.3.6.1.4.1.2272.1.81.1.1.2.1.5 | ColumnrcBfdTmpSessUdpPort | read-create | current | The UDP Port for BFD. The default value is the well-known value for this port. |
| 1.3.6.1.4.1.2272.1.81.1.1.2.1.6 | ColumnrcBfdTmpSessState | read-only | current | The perceived state of the BFD session. |
| 1.3.6.1.4.1.2272.1.81.1.1.2.1.7 | ColumnrcBfdTmpSessRemoteHeardFlag | read-only | current | This object specifies status of BFD packet reception from the remote system. Specifically, it is set to true(1) if the local system is actively receiving BFD p… |
| 1.3.6.1.4.1.2272.1.81.1.1.2.1.8 | ColumnrcBfdTmpSessDiag | accessible-for-notify | current | A diagnostic code specifying the local system's reason for the last transition of the session from up(1) to some other state. |
| 1.3.6.1.4.1.2272.1.81.1.1.2.1.9 | ColumnrcBfdTmpSessOperMode | read-only | current | This object specifies current operating mode that BFD session is operating in. A value of AsyncModeWEchoFun(1) ... A value of AsynchModeWOEchoFun(2) ... A valu… |
| 1.3.6.1.4.1.2272.1.81.1.1.2.1.10 | ColumnrcBfdTmpSessDemandModeDesiredFlag | read-create | current | This object indicates that the local system's desire to use Demand mode. Specifically, it is set to true(1) if the local system wishes to use Demand mode or fa… |
| 1.3.6.1.4.1.2272.1.81.1.1.2.1.11 | ColumnrcBfdTmpSessEchoFuncModeDesiredFlag | read-create | current | This object indicates that the local system's desire to use Echo mode. Specifically, it is set to true(1) if the local system wishes to use Echo mode or false(… |
| 1.3.6.1.4.1.2272.1.81.1.1.2.1.12 | ColumnrcBfdTmpSessControlPlanIndepFlag | read-create | current | This object indicates that the local system's ability to continue to function through a disruption of the control plane. Specifically, it is set to true(1) if … |
| 1.3.6.1.4.1.2272.1.81.1.1.2.1.13 | ColumnrcBfdTmpSessAddrType | read-create | current | This object specifies IP address of the interface associated with this BFD session. Only values unknown(0), ipv4(1) or ipv6(2) have to be supported. A value of… |
| 1.3.6.1.4.1.2272.1.81.1.1.2.1.14 | ColumnrcBfdTmpSessAddr | read-create | current | This object specifies IP address of the interface associated with this BFD session. It can also be used to enabled BFD on a specific interface. The value is se… |
| 1.3.6.1.4.1.2272.1.81.1.1.2.1.15 | ColumnrcBfdTmpSessDesiredMinTxInterval | read-create | current | This object specifies the minimum interval, in microseconds, that the local system would like to use when transmitting BFD Control packets. |
| 1.3.6.1.4.1.2272.1.81.1.1.2.1.16 | ColumnrcBfdTmpSessReqMinRxInterval | read-create | current | This object specifies the minimum interval, in microseconds, between received BFD Control packets the local system is capable of supporting. |
| 1.3.6.1.4.1.2272.1.81.1.1.2.1.17 | ColumnrcBfdTmpSessReqMinEchoRxInterval | read-create | current | This object specifies the minimum interval, in microseconds, between received BFD Echo packets that this system is capable of supporting. |
| 1.3.6.1.4.1.2272.1.81.1.1.2.1.18 | ColumnrcBfdTmpSessDetectMult | read-create | current | This object specifies the Detect time multiplier. |
| 1.3.6.1.4.1.2272.1.81.1.1.2.1.19 | ColumnrcBfdTmpSessStorType | read-create | current | This variable indicates the storage type for this object. Conceptual rows having the value 'permanent' need not allow write-access to any columnar objects in t… |
| 1.3.6.1.4.1.2272.1.81.1.1.2.1.20 | ColumnrcBfdTmpSessRowStatus | read-create | current | This variable is used to create, modify, and/or delete a row in this table. When a row in this table has a row in the active(1) state, no objects in this row c… |
| 1.3.6.1.4.1.2272.1.81.1.1.2.1.21 | ColumnrcBfdTmpSessAuthPresFlag | read-create | current | This object indicates that the local system's desire to use Authentication. Specifically, it is set to true(1) if the local system wishes the session to be aut… |
| 1.3.6.1.4.1.2272.1.81.1.1.2.1.22 | ColumnrcBfdTmpSessAuthenticationType | read-create | current | The Authentication Type used for this BFD session. This field is valid only when the Authentication Present bit is set |
| 1.3.6.1.4.1.2272.1.81.1.1.2.1.23 | ColumnrcBfdTmpSessDestAddr | read-only | current | This object specifies destination IP address of the interface associated with this BFD session. |
| 1.3.6.1.4.1.2272.1.81.1.1.2.1.24 | ColumnrcBfdTmpSessOldState | read-only | current | The old state of the BFD session. |
| 1.3.6.1.4.1.2272.1.81.1.1.3 | TablercBfdTmpSessPerfTable | not-accessible | current | This table specifies BFD Session performance counters. |
| 1.3.6.1.4.1.2272.1.81.1.1.3.1 | RowrcBfdTmpSessPerfEntry | not-accessible | current | An entry in this table is created by a BFD-enabled node for every BFD Session. bfdCounterDiscontinuityTime is used to indicate potential discontinuity for all … |
| 1.3.6.1.4.1.2272.1.81.1.1.3.1.1 | ColumnrcBfdTmpSessPerfPktIn | read-only | current | The total number of BFD messages received for this BFD session. |
| 1.3.6.1.4.1.2272.1.81.1.1.3.1.2 | ColumnrcBfdTmpSessPerfPktOut | read-only | current | The total number of BFD messages sent for this BFD session. |
| 1.3.6.1.4.1.2272.1.81.1.1.3.1.3 | ColumnrcBfdTmpSessUpTime | read-only | current | The value of sysUpTime on the most recent occasion at which the session came up. If no such up event exists this object contains a zero value. |
| 1.3.6.1.4.1.2272.1.81.1.1.3.1.4 | ColumnrcBfdTmpSessPerfLastSessDownTime | read-only | current | The value of sysUpTime on the most recent occasion at which the last time communication was lost with the neighbor. If no such down event exist this object con… |
| 1.3.6.1.4.1.2272.1.81.1.1.3.1.5 | ColumnrcBfdTmpSessPerfLastCommLostDiag | read-only | current | The BFD diag code for the last time communication was lost with the neighbor. If no such down event exists this object contains a zero value. |
| 1.3.6.1.4.1.2272.1.81.1.1.3.1.6 | ColumnrcBfdTmpSessPerfSessUpCount | read-only | current | The number of times this session has gone into the Up state since the router last rebooted. |
| 1.3.6.1.4.1.2272.1.81.1.1.3.1.7 | ColumnrcBfdTmpSessPerfDiscTime | read-only | current | The value of sysUpTime on the most recent occasion at which any one or more of the session counters suffered a discontinuity. The relevant counters are the spe… |
| 1.3.6.1.4.1.2272.1.81.1.1.3.1.8 | ColumnrcBfdTmpSessPerfPktInHC | read-only | current | This value represents the total number of BFD messages received for this BFD session. It MUST be equal to the least significant 32 bits of bfdSessPerfPktIn if … |
| 1.3.6.1.4.1.2272.1.81.1.1.3.1.9 | ColumnrcBfdTmpSessPerfPktOutHC | read-only | current | This value represents the total number of total number of BFD messages transmitted for this BFD session. It MUST be equal to the least significant 32 bits of b… |
| 1.3.6.1.4.1.2272.1.81.1.1.4 | TablercBfdTmpSessMapTable | not-accessible | current | The BFD Session Mapping Table maps the complex indexing of the BFD sessions to the flat BFDIndex used in the BfdSessionTable. Implementors need to be aware tha… |
| 1.3.6.1.4.1.2272.1.81.1.1.4.1 | RowrcBfdTmpSessMapEntry | not-accessible | current | The BFD Session Entry describes BFD session that is mapped to this index. Implementors need to be aware that if the value of the mplsInSegmentMapLabelPtrIndex … |
| 1.3.6.1.4.1.2272.1.81.1.1.4.1.1 | ColumnrcBfdTmpSessMapBfdIndex | read-only | current | This object specifies the BfdIndex referred to by the indexes of this row. In essence, a mapping is provided between these indexes and the BfdSessTable. |
| 1.3.6.1.4.1.2272.1.81.2 | NodercBfdExtMib | |||
| 1.3.6.1.4.1.2272.1.81.2.1 | NodercBfdExtObjects | |||
| 1.3.6.1.4.1.2272.1.81.2.1.1 | TablercBfdExtSessTable | not-accessible | current | The BFD Session Extension Table describes the BFD sessions. |
| 1.3.6.1.4.1.2272.1.81.2.1.1.1 | RowrcBfdExtSessEntry | not-accessible | current | The BFD Session Extension Entry describes BFD session. |
| 1.3.6.1.4.1.2272.1.81.2.1.1.1.1 | ColumnrcBfdExtSessPeerState | read-only | current | The perceived peer state of the BFD session. |
| 1.3.6.1.4.1.2272.1.81.2.1.1.1.2 | ColumnrcBfdExtSessPeerAddrType | read-only | current | Inet Address Type of peer IP address associated with this BFD session. |
| 1.3.6.1.4.1.2272.1.81.2.1.1.1.3 | ColumnrcBfdExtSessPeerAddr | read-only | current | This object specifies peer IP address associated with this BFD session. |
| 1.3.6.1.4.1.2272.1.81.2.1.1.1.4 | ColumnrcBfdExtSessApp | read-only | current | This object specifies the applications configured on this BFD session. |
| 1.3.6.1.4.1.2272.1.81.2.1.1.1.5 | ColumnrcBfdExtSessAppRun | read-only | current | This object specifies the applications running on this BFD session. |
| 1.3.6.1.4.1.2272.1.82 | NodercLinkOam | |||
| 1.3.6.1.4.1.2272.1.83 | NodercAccessMstp | |||
| 1.3.6.1.4.1.2272.1.84 | NodercDhu | |||
| 1.3.6.1.4.1.2272.1.85 | NodercKhi | |||
| 1.3.6.1.4.1.2272.1.85.1 | NodercKhiConfig | |||
| 1.3.6.1.4.1.2272.1.85.1.1 | ScalarrcKhiConfigKhiAdminState | read-write | current | Key Health Inidaction, this object is used turn off the KHI feature administratively. true(1) means On, false(2) means off. By default, it is always set to tru… |
| 1.3.6.1.4.1.2272.1.85.1.2 | ScalarrcKhiConfigKhiBootDelay | read-write | current | Time interval from system up and running to start the KHI feature. Set to 0 to disable to the time interval. |
| 1.3.6.1.4.1.2272.1.85.1.3 | ScalarrcKhiConfigClearAction | read-write | current | Clear action with bits set. 0 Bit means from left (most sinificant) bit to right (less sinificnt) bit |
| 1.3.6.1.4.1.2272.1.85.1.4 | ScalarrcKhiConfigPortKhiAdminState | read-write | current | Key Health Inidcation, this object is used turn off the Port KHI feature administratively. true(1) means On, false(2) means off. By default, it is always set t… |
| 1.3.6.1.4.1.2272.1.85.1.5 | ScalarrcKhiConfigPerfKhiAdminState | read-write | current | Key Health Inidcation, this object is used turn off the Performance KHI feature administratively. true(1) means On, false(2) means off. By default, it is alway… |
| 1.3.6.1.4.1.2272.1.85.1.6 | ScalarrcKhiConfigChasKhiAdminState | read-write | current | Key Health Inidcation, this object is used turn off the Chassis KHI feature administratively. true(1) means On, false(2) means off. By default, it is always se… |
| 1.3.6.1.4.1.2272.1.85.1.7 | ScalarrcKhiConfigForwardingKhiAdminState | read-write | current | Key Health Inidcation, this object is used turn off the Forwarding KHI feature administratively. true(1) means On, false(2) means off. By default, it is always… |
| 1.3.6.1.4.1.2272.1.85.1.8 | ScalarrcKhiConfigMgmtKhiAdminState | read-write | current | Key Health Inidcation, this object is used turn off the Management KHI feature administratively. true(1) means On, false(2) means off. By default, it is always… |
| 1.3.6.1.4.1.2272.1.85.1.9 | ScalarrcKhiConfigForwardingClearSlot | read-write | current | Clear KHI Forwarding stats for a particular Slot |
| 1.3.6.1.4.1.2272.1.85.1.10 | ScalarrcKhiConfigMonitoringKhiAdminState | read-write | current | Key Health Inidcation, this object is used turn off the Monitoring KHI feature administratively. true(1) means On, false(2) means off. By default, it is always… |
| 1.3.6.1.4.1.2272.1.85.2 | NodercKhiHighLevel | |||
| 1.3.6.1.4.1.2272.1.85.2.1 | ScalarrcKhiHighLevelKhiOperStatus | read-only | current | Indicate if the KHI feature is on(1), off(2) or wait(3). running (1) means KHI is enabled and running. off(2) means KHI is disabled wait(3) means KHI is enable… |
| 1.3.6.1.4.1.2272.1.85.2.2 | ScalarrcKhiHighLevelChassisCurrentStatus | read-only | current | Chassis current status. Include: Chassis Temperature, Fan Temperature and operational status, Line card operational status, Mezz operational status, HA status.… |
| 1.3.6.1.4.1.2272.1.85.2.3 | ScalarrcKhiHighLevelChassisFirstHighestEvent | read-only | current | The first highest alert changing of chassis status since last boot or last clear (rcKhiConfigClearAction). green(1): All Chassis parameters were normal. yellow… |
| 1.3.6.1.4.1.2272.1.85.2.4 | ScalarrcKhiHighLevelChassisFirstHighestEventTime | read-only | current | Timestamp of first highest alert of chassis status indication (rcKhiHighLevelChassisChangeStatus) |
| 1.3.6.1.4.1.2272.1.85.2.5 | ScalarrcKhiHighLevelChassisRefStatus | read-only | current | Chassis reference status before the first the first change and since last boot or last clear (rcKhiConfigClearAction). green(1): All Chassis parameters were no… |
| 1.3.6.1.4.1.2272.1.85.2.6 | ScalarrcKhiHighLevelChassisStatusLastClearTime | read-only | current | chassis status last clear time stamp |
| 1.3.6.1.4.1.2272.1.85.2.7 | ScalarrcKhiHighLevelCpuPerfCurrentStatus | read-only | current | Current CPU Performance Status. Inlcudes: CPU utilization, Fabric utilization, Buffer utilization, Dram Size, Suspended task, CPU control status. green(1): All… |
| 1.3.6.1.4.1.2272.1.85.2.8 | ScalarrcKhiHighLevelCpuPerfFirstHighestEvent | read-only | current | The first highest alert change of CPU performance status since last boot or last clear (rcKhiConfigClearAction). green(1): All Chassis parameters were normal. … |
| 1.3.6.1.4.1.2272.1.85.2.9 | ScalarrcKhiHighLevelCpuPerfFirstHighestEventTime | read-only | current | Timestamp of first highest alert change of CPU Performance status (rcKhiHighLevelCpuPerfChangeStatus) |
| 1.3.6.1.4.1.2272.1.85.2.10 | ScalarrcKhiHighLevelCpuPerfRefStatus | read-only | current | CPU performance reference status before the first change since last boot or last clear (rcKhiConfigClearAction). green(1): All Chassis parameters were normal. … |
| 1.3.6.1.4.1.2272.1.85.2.11 | ScalarrcKhiHighLevelCpuPerfStatusLastClearTime | read-only | current | CPU Performance last clear time stamp |
| 1.3.6.1.4.1.2272.1.85.2.12 | ScalarrcKhiHighLevelPortCurrentStatus | read-only | current | Ports current status. green(1): Port link state has no change. yellow(2): Port link state is changed by admin. red(3): Port link state is in critical state. |
| 1.3.6.1.4.1.2272.1.85.2.13 | ScalarrcKhiHighLevelPortFirstHighestEvent | read-only | current | The first highest change indication of ports status since last boot or last clear (rcKhiConfigClearAction). green(1): Port link state had no change. yellow(2):… |
| 1.3.6.1.4.1.2272.1.85.2.14 | ScalarrcKhiHighLevelPortFirstHighestEventTime | read-only | current | Timestamp of first highest inidcation of Ports status status indication (rcKhiHighLevelPortChangeStatus) |
| 1.3.6.1.4.1.2272.1.85.2.15 | ScalarrcKhiHighLevelPortRefStatus | read-only | current | Ports reference status before first change since last boot or last clear (rcKhiConfigClearAction). green(1): Port link state had no change. yellow(2): Port lin… |
| 1.3.6.1.4.1.2272.1.85.2.16 | ScalarrcKhiHighLevelPortStatusLastClearTime | read-only | current | Ports status last clear time stamp |
| 1.3.6.1.4.1.2272.1.85.2.17 | ScalarrcKhiHighLevelForwardingCurrentStatus | read-only | current | Forwarding current status. green(1): Port link state has no change. yellow(2): Port link state is changed by admin. red(3): Port link state is in critical stat… |
| 1.3.6.1.4.1.2272.1.85.2.18 | ScalarrcKhiHighLevelForwardingFirstHighestEvent | read-only | current | The frist highest changing inidcation of Forwarding status since last boot or clear. green(1): Port link state had no change. yellow(2): Port link state was ch… |
| 1.3.6.1.4.1.2272.1.85.2.19 | ScalarrcKhiHighLevelForwardingFirstHighestEventTime | read-only | current | Timestamp of first highest inidcation of Forwarding status status indication (rcKhiHighLevelForwardingChangeStatus) |
| 1.3.6.1.4.1.2272.1.85.2.20 | ScalarrcKhiHighLevelForwardingRefStatus | read-only | current | Forwarding reference status before the first change since last boot or clear. green(1): Port link state had no change. yellow(2): Port link state was changed b… |
| 1.3.6.1.4.1.2272.1.85.2.21 | ScalarrcKhiHighLevelForwardingStatusLastClearTime | read-only | current | Forwarding status last clear time stamp |
| 1.3.6.1.4.1.2272.1.85.2.22 | ScalarrcKhiHighLevelTotalConfigVlanCount | read-only | current | Total Number of Vlan configured in device |
| 1.3.6.1.4.1.2272.1.85.2.23 | ScalarrcKhiHighLevelTotalConfigIpIfCount | read-only | current | Total Configured IP Interface count |
| 1.3.6.1.4.1.2272.1.85.2.24 | ScalarrcKhiHighLevelTotalOperIpIfCurrentCount | read-only | current | Current total operational IP Interface count |
| 1.3.6.1.4.1.2272.1.85.2.25 | ScalarrcKhiHighLevelIpIfFirstChangeTime | read-only | current | Timestamp of first change of IP interface |
| 1.3.6.1.4.1.2272.1.85.2.26 | ScalarrcKhiHighLevelTotalOperIpIfReferenceCount | read-only | current | Reference count of total operational IP berfore the first change since last boot or last clear |
| 1.3.6.1.4.1.2272.1.85.2.27 | ScalarrcKhiHighLevelIpIfLastClearTime | read-only | current | IP interface last clear time stamp |
| 1.3.6.1.4.1.2272.1.85.2.28 | ScalarrcKhiHighLevelGlobalRouterTotalRouteCount | read-only | current | Total number of route count in VRF 0, which is default VRF |
| 1.3.6.1.4.1.2272.1.85.2.29 | ScalarrcKhiHighLevelGlobalRouterTotalRouteRefCount | read-only | current | Total number of route reference count in VRF 0, which is default VRF |
| 1.3.6.1.4.1.2272.1.85.2.30 | ScalarrcKhiHighLevelGlobalRouterLastClearTime | read-only | current | Global router total routes last clear time stamp |
| 1.3.6.1.4.1.2272.1.85.2.31 | ScalarrcKhiHighLevelGlobalRouterTotalBestRouteCount | read-only | current | total number of best route count in VRF 0 (default VRF) |
| 1.3.6.1.4.1.2272.1.85.2.32 | ScalarrcKhiHighLevelGlobalRouterBestRouteRefCount | read-only | current | Total number of best route reference count in VRF 0, which is default VRF |
| 1.3.6.1.4.1.2272.1.85.2.33 | ScalarrcKhiHighLevelGlobalRouterBestRouteLastClearTime | read-only | current | Global router total best routes last clear time stamp |
| 1.3.6.1.4.1.2272.1.85.2.34 | ScalarrcKhiHighLevelNonZeroVrfsTotalRouteCount | read-only | current | Total number of route count in Non Zero Vrfs |
| 1.3.6.1.4.1.2272.1.85.2.35 | ScalarrcKhiHighLevelNonZeroVrfsTotalRouteRefCount | read-only | current | Total number of route reference count in non zero VRF |
| 1.3.6.1.4.1.2272.1.85.2.36 | ScalarrcKhiHighLevelNonZeroVrfsRouteLastClearTime | read-only | current | Non zero vrf total routes last clear time stamp |
| 1.3.6.1.4.1.2272.1.85.2.37 | ScalarrcKhiHighLevelNonZeroVrfsTotalBestRouteCount | read-only | current | total number of best route count in Non Zero Vrfs |
| 1.3.6.1.4.1.2272.1.85.2.38 | ScalarrcKhiHighLevelNonZeroVrfsBestRouteRefCount | read-only | current | Total number of best route reference count in non zero VRF |
| 1.3.6.1.4.1.2272.1.85.2.39 | ScalarrcKhiHighLevelNonZeroVrfsBestRouteLastClearTime | read-only | current | Non zero vrf total best routes last clear time stamp |
| 1.3.6.1.4.1.2272.1.85.2.40 | ScalarrcKhiHighLevelFdbRecordCount | read-only | current | This count includes the number of FDB entries in the CP (Control card) database, it includes the local and remote learnt MACs via IST/SMLT, it is not the actua… |
| 1.3.6.1.4.1.2272.1.85.2.41 | ScalarrcKhiHighLevelFdbRecordRefCount | read-only | current | Total number of fdb record reference count |
| 1.3.6.1.4.1.2272.1.85.2.42 | ScalarrcKhiHighLevelFdbRecordLastClearTime | read-only | current | FDB Records Last clear time |
| 1.3.6.1.4.1.2272.1.85.2.43 | ScalarrcKhiHighLevelGlobalRouterProtocolState | read-only | current | Global Router Protocol State |
| 1.3.6.1.4.1.2272.1.85.2.44 | ScalarrcKhiHighLevelGlobalRouterProtocolStateLastClearTime | read-only | current | GR Protocol State last clear time |
| 1.3.6.1.4.1.2272.1.85.2.45 | ScalarrcKhiHighLevelNonZeroVrfsProtocolState | read-only | current | Non zero VRF Protocol State |
| 1.3.6.1.4.1.2272.1.85.2.46 | ScalarrcKhiHighLevelNonZeroVrfsProtocolStateLastClearTime | read-only | current | Nonzero vrf Protocol State last clear time |
| 1.3.6.1.4.1.2272.1.85.2.47 | ScalarrcKhiHighLevelIstCurrentStatus | read-only | current | Key Health Indicction, IST current status |
| 1.3.6.1.4.1.2272.1.85.2.48 | ScalarrcKhiHighLevelIstFirstHighestEvent | read-only | current | Key Health Indicction, IST changing status since last boot or clear |
| 1.3.6.1.4.1.2272.1.85.2.49 | ScalarrcKhiHighLevelIstFirstHighestEventTime | read-only | current | Timestamp of first change Ist Status |
| 1.3.6.1.4.1.2272.1.85.2.50 | ScalarrcKhiHighLevelIstStatusLastClearTime | read-only | current | Ist Status last Clear timestamp |
| 1.3.6.1.4.1.2272.1.85.2.51 | ScalarrcKhiHighLevelSmltOperPortsCount | read-only | current | Current total numbers of SMLT operational ports |
| 1.3.6.1.4.1.2272.1.85.2.52 | ScalarrcKhiHighLevelSmltOperPortsChangeTime | read-only | current | Timestamp of first change Smlt operational ports |
| 1.3.6.1.4.1.2272.1.85.2.53 | ScalarrcKhiHighLevelSmltOperPortsReferenceCount | read-only | current | Reference count of SMLT operational ports before the first chaneg since last boot or clear |
| 1.3.6.1.4.1.2272.1.85.2.54 | ScalarrcKhiHighLevelSmltOperPortsLastClearTime | read-only | current | SMLT operational ports count last Clear timestamp |
| 1.3.6.1.4.1.2272.1.85.2.55 | ScalarrcKhiHighLevelTotalSmltConfigPorts | read-only | current | Total number of SMLT configured ports |
| 1.3.6.1.4.1.2272.1.85.2.56 | ScalarrcKhiHighLevelLogCurrentStatus | read-only | current | Logging task current status |
| 1.3.6.1.4.1.2272.1.85.2.57 | ScalarrcKhiHighLevelLogFirstHighestEvent | read-only | current | The highest inidcation of the first change of logging task status since last boot or clear |
| 1.3.6.1.4.1.2272.1.85.2.58 | ScalarrcKhiHighLevelLogFirstHighestEventTime | read-only | current | Timestamp of first change logging task Status |
| 1.3.6.1.4.1.2272.1.85.2.59 | ScalarrcKhiHighLevelLogRefStatus | read-only | current | log referemce status before the first change since last boot or clear |
| 1.3.6.1.4.1.2272.1.85.2.60 | ScalarrcKhiHighLevelLogStatusLastClearTime | read-only | current | Ist Status last Clear timestamp |
| 1.3.6.1.4.1.2272.1.85.2.61 | ScalarrcKhiHighLevelNumOfTcpConnection | read-only | current | Total number of TCP connections |
| 1.3.6.1.4.1.2272.1.85.2.62 | ScalarrcKhiHighLevelNumOfActiveTcpConnection | read-only | current | Total number of TCP connections which is establish |
| 1.3.6.1.4.1.2272.1.85.2.63 | ScalarrcKhiHighLevelNumOfCliUsers | read-only | current | Total number of CLI sesssion |
| 1.3.6.1.4.1.2272.1.85.3 | NodercKhiChassis | |||
| 1.3.6.1.4.1.2272.1.85.3.1 | ScalarrcKhiChassisChasTemperature | read-only | current | Used to indicate the core operating temperature of the chassis. This value represents the degree in celsius of the air inside the chassis. |
| 1.3.6.1.4.1.2272.1.85.3.2 | ScalarrcKhiChassisTemperatureFirstHigherAlert | read-only | current | Used to indicate the the first higher temperature alert of the chassis since last boot or clear. The value is the degree in celsius. |
| 1.3.6.1.4.1.2272.1.85.3.3 | ScalarrcKhiChassisTemperatureFirstHigherAlertTime | read-only | current | The time at which the first higher temperature alert occur. |
| 1.3.6.1.4.1.2272.1.85.3.4 | ScalarrcKhiChassisChasTemperatureStatusIndication | read-only | current | KHI Status indication |
| 1.3.6.1.4.1.2272.1.85.3.5 | ScalarrcKhiChassisMasterCpuMezzOperState | read-only | current | Used to indicate the CPU Mezz card |
| 1.3.6.1.4.1.2272.1.85.3.6 | ScalarrcKhiChassisMasterCpuMezzStatusIndication | read-only | current | the CPU Mezz card status indication |
| 1.3.6.1.4.1.2272.1.85.3.7 | ScalarrcKhiChassisStandbyCpuMezzOperState | read-only | current | Used to indicate the CPU Mezz card |
| 1.3.6.1.4.1.2272.1.85.3.8 | ScalarrcKhiChassisStandbyCpuMezzStatusIndication | read-only | current | Used to indicate the CPU Mezz card |
| 1.3.6.1.4.1.2272.1.85.3.9 | ScalarrcKhiChassisStandbyCpuState | read-only | current | Indicate the standby-CPU state. initialization - indicate the CPU is in this state (1). oneWayActive - Modules that need to be synchronized have registered wit… |
| 1.3.6.1.4.1.2272.1.85.3.10 | ScalarrcKhiChassisStandbyCpuStatusIndication | read-only | current | the Ha-CPU status indicaton |
| 1.3.6.1.4.1.2272.1.85.3.11 | TablercKhiChassisHistoryTable | not-accessible | current | Chassis table include chassis history info |
| 1.3.6.1.4.1.2272.1.85.3.11.1 | RowrcKhiChassisHistoryEntry | not-accessible | current | A chassis history table entry. |
| 1.3.6.1.4.1.2272.1.85.3.11.1.1 | ColumnrcKhiChassisHistoryIndex | not-accessible | current | history index for chassis |
| 1.3.6.1.4.1.2272.1.85.3.11.1.2 | ColumnrcKhiChassisHistoryTemperatureStateChange | read-only | current | Chassis temperature state change. Green if temperature <=40, Yellow if temperature >=41 and <50 and Red if temperature >=50 |
| 1.3.6.1.4.1.2272.1.85.3.11.1.3 | ColumnrcKhiChassisHistoryTemperatureStateChangeTime | read-only | current | Time at which the temperature state change occur. |
| 1.3.6.1.4.1.2272.1.85.3.12 | TablercKhiChassisFanTable | not-accessible | current | Fan table include Fan statistics |
| 1.3.6.1.4.1.2272.1.85.3.12.1 | RowrcKhiChassisFanEntry | not-accessible | current | A chassis fan table entry. |
| 1.3.6.1.4.1.2272.1.85.3.12.1.1 | ColumnrcKhiChassisFanId | not-accessible | current | An unique index used to identify a particular fan in the system. |
| 1.3.6.1.4.1.2272.1.85.3.12.1.2 | ColumnrcKhiChassisFanOperState | read-only | current | Fan operational state |
| 1.3.6.1.4.1.2272.1.85.3.12.1.3 | ColumnrcKhiChassisFanFirstStateChange | read-only | current | Fan operational state first change after boot or clear. |
| 1.3.6.1.4.1.2272.1.85.3.12.1.4 | ColumnrcKhiChassisFanFirstStateChangeTime | read-only | current | Time at which the fan operational state first change occur. |
| 1.3.6.1.4.1.2272.1.85.3.12.1.5 | ColumnrcKhiChassisFanOperStatusIndication | read-only | current | Fan oper state status indication |
| 1.3.6.1.4.1.2272.1.85.3.12.1.6 | ColumnrcKhiChassisFanTemperature | read-only | current | Fan 1 temperature |
| 1.3.6.1.4.1.2272.1.85.3.12.1.7 | ColumnrcKhiChassisFanTempFirstHigherAlert | read-only | current | Fan temperature first higher alert |
| 1.3.6.1.4.1.2272.1.85.3.12.1.8 | ColumnrcKhiChassisFanTempFirstHigherAlertTime | read-only | current | Time at which the fan temperature first higher alert occur |
| 1.3.6.1.4.1.2272.1.85.3.12.1.9 | ColumnrcKhiChassisFanTempStatusIndication | read-only | current | Fan status indication |
| 1.3.6.1.4.1.2272.1.85.3.13 | TablercKhiChassisFanOperHistoryTable | not-accessible | current | Fan table include Fan operational state history info |
| 1.3.6.1.4.1.2272.1.85.3.13.1 | RowrcKhiChassisFanOperHistoryEntry | not-accessible | current | A chassis fan oper state history table entry. |
| 1.3.6.1.4.1.2272.1.85.3.13.1.1 | ColumnrcKhiChassisFanOperHistoryFanId | not-accessible | current | An unique index used to identify a particular fan in the system. |
| 1.3.6.1.4.1.2272.1.85.3.13.1.2 | ColumnrcKhiChassisFanOperHistoryIndex | not-accessible | current | history index for a particular fan |
| 1.3.6.1.4.1.2272.1.85.3.13.1.3 | ColumnrcKhiChassisFanOperHistoryStateChange | read-only | current | Fan operational state change. Up - Green and Down - Red |
| 1.3.6.1.4.1.2272.1.85.3.13.1.4 | ColumnrcKhiChassisFanOperHistoryStateChangeTime | read-only | current | Time at which the fan operational state change occur. |
| 1.3.6.1.4.1.2272.1.85.3.14 | TablercKhiChassisFanTempHistoryTable | not-accessible | current | Fan table include Fan temperature history info |
| 1.3.6.1.4.1.2272.1.85.3.14.1 | RowrcKhiChassisFanTempHistoryEntry | not-accessible | current | A chassis fan Temperature history table entry. |
| 1.3.6.1.4.1.2272.1.85.3.14.1.1 | ColumnrcKhiChassisFanTempHistoryFanId | not-accessible | current | An unique index used to identify a particular fan in the system. |
| 1.3.6.1.4.1.2272.1.85.3.14.1.2 | ColumnrcKhiChassisFanTempHistoryIndex | not-accessible | current | history index for a particular fan |
| 1.3.6.1.4.1.2272.1.85.3.14.1.3 | ColumnrcKhiChassisFanTempHistoryTempStateChange | read-only | current | Fan temperature state change. Green if temperature <=40, Yellow if temperature >=41 and <50 and Red if temperature >=50 |
| 1.3.6.1.4.1.2272.1.85.3.14.1.4 | ColumnrcKhiChassisFanTempHistoryTempStateChangeTime | read-only | current | Time at which the fan temperature state change occur. |
| 1.3.6.1.4.1.2272.1.85.3.15 | TablercKhiChassisPowerSupplyTable | not-accessible | current | Power Supply table include Power Supply statistics |
| 1.3.6.1.4.1.2272.1.85.3.15.1 | RowrcKhiChassisPowerSupplyEntry | not-accessible | current | A chassis fan table entry. |
| 1.3.6.1.4.1.2272.1.85.3.15.1.1 | ColumnrcKhiChassisPowerSupplyId | not-accessible | current | An unique index used to identify a particular Power Supply in the system. |
| 1.3.6.1.4.1.2272.1.85.3.15.1.2 | ColumnrcKhiChassisPowerSupplyOperState | read-only | current | Power Supply operational state |
| 1.3.6.1.4.1.2272.1.85.3.15.1.3 | ColumnrcKhiChassisPowerSupplyFirstStateChange | read-only | current | Power Supply operational state First change after boot or clear. |
| 1.3.6.1.4.1.2272.1.85.3.15.1.4 | ColumnrcKhiChassisPowerSupplyFirstStateChangeTime | read-only | current | Time at which Power Supply State first change occur. |
| 1.3.6.1.4.1.2272.1.85.3.15.1.5 | ColumnrcKhiChassisPowerSupplyStatusIndication | read-only | current | Power Supply status indication |
| 1.3.6.1.4.1.2272.1.85.3.16 | TablercKhiChassisPowerSupplyHistoryTable | not-accessible | current | Power Supply table include power supply history info |
| 1.3.6.1.4.1.2272.1.85.3.16.1 | RowrcKhiChassisPowerSupplyHistoryEntry | not-accessible | current | A chassis power supply history table entry. |
| 1.3.6.1.4.1.2272.1.85.3.16.1.1 | ColumnrcKhiChassisPowerSupplyHistoryPSId | not-accessible | current | An unique index used to identify a particular PowerSupply in the system. |
| 1.3.6.1.4.1.2272.1.85.3.16.1.2 | ColumnrcKhiChassisPowerSupplyHistoryIndex | not-accessible | current | history index for a particular power supply |
| 1.3.6.1.4.1.2272.1.85.3.16.1.3 | ColumnrcKhiChassisPowerSupplyHistoryOperStateChange | read-only | current | Power supply operational state change. Green if power supply comes up and Red if it goes down |
| 1.3.6.1.4.1.2272.1.85.3.16.1.4 | ColumnrcKhiChassisPowerSupplyHistoryOperStateChangeTime | read-only | current | Time at which the power supply operational state change occur. |
| 1.3.6.1.4.1.2272.1.85.3.17 | TablercKhiChassisLineCardTable | not-accessible | current | table include line card statistics |
| 1.3.6.1.4.1.2272.1.85.3.17.1 | RowrcKhiChassisLineCardEntry | not-accessible | current | A chassis line card table entry. |
| 1.3.6.1.4.1.2272.1.85.3.17.1.1 | ColumnrcKhiChassisLineCardSlot | not-accessible | current | An unique index used to identify a particular slot of line card in the system. |
| 1.3.6.1.4.1.2272.1.85.3.17.1.2 | ColumnrcKhiChassisLineCardOperState | read-only | current | Line card operational state |
| 1.3.6.1.4.1.2272.1.85.3.17.1.3 | ColumnrcKhiChassisLineCardAdminState | read-only | current | Line card administrative state |
| 1.3.6.1.4.1.2272.1.85.3.17.1.4 | ColumnrcKhiChassisLineCardFirstStateChange | read-only | current | Line card first operational state change after boot or clear. |
| 1.3.6.1.4.1.2272.1.85.3.17.1.5 | ColumnrcKhiChassisLineCardFirstStateChangeTime | read-only | current | The time at which line card first operational state change occur. |
| 1.3.6.1.4.1.2272.1.85.3.17.1.6 | ColumnrcKhiChassisLineCardStatusIndication | read-only | current | Line card Status indication |
| 1.3.6.1.4.1.2272.1.85.3.18 | TablercKhiChassisLineCardHistoryTable | not-accessible | current | Line card table include line card history info |
| 1.3.6.1.4.1.2272.1.85.3.18.1 | RowrcKhiChassisLineCardHistoryEntry | not-accessible | current | A chassis line card history table entry. |
| 1.3.6.1.4.1.2272.1.85.3.18.1.1 | ColumnrcKhiChassisLineCardHistoryLCId | not-accessible | current | An unique index used to identify a particular LineCard in the system. |
| 1.3.6.1.4.1.2272.1.85.3.18.1.2 | ColumnrcKhiChassisLineCardHistoryIndex | not-accessible | current | history index for a particular line card |
| 1.3.6.1.4.1.2272.1.85.3.18.1.3 | ColumnrcKhiChassisLineCardHistoryOperStateChange | read-only | current | Line card operational state change. Green if operationally up. Yellow if operationally down and adminstratively disabled. Red if operationally down and adminst… |
| 1.3.6.1.4.1.2272.1.85.3.18.1.4 | ColumnrcKhiChassisLineCardHistoryOperStateChangeTime | read-only | current | Time at which the line card operational state change occur. |
| 1.3.6.1.4.1.2272.1.85.4 | NodercKhiPerformance | |||
| 1.3.6.1.4.1.2272.1.85.4.1 | ScalarrcKhiPerformanceCurrentCpuUtil | read-only | current | Current Percentage of CPU utilization in 5 minutes sampling. Status: Yellow: above 75 Green: below 75 |
| 1.3.6.1.4.1.2272.1.85.4.2 | ScalarrcKhiPerformanceFirstHigherCpuUtil | read-only | current | FirstHigher Percentage of CPU utilization in 5 minutes sampling. Status: Yellow: above 75 Green: below 75 |
| 1.3.6.1.4.1.2272.1.85.4.3 | ScalarrcKhiPerformanceCpuUtilFirstHigherAlertTime | read-only | current | Timestamp of the high cpu utilization |
| 1.3.6.1.4.1.2272.1.85.4.4 | ScalarrcKhiPerformanceCpuUtilStatus | read-only | current | the high cpu utilization status |
| 1.3.6.1.4.1.2272.1.85.4.5 | ScalarrcKhiPerformanceCurrentSwitchFabricUtil | read-only | current | Current Percentage of Switching Fabric utilization |
| 1.3.6.1.4.1.2272.1.85.4.6 | ScalarrcKhiPerformanceFirstHigherSwitchFabricUtil | read-only | current | FirstHigher Percentage of Switching Fabric utilization |
| 1.3.6.1.4.1.2272.1.85.4.7 | ScalarrcKhiPerformanceSwitchFabricUtilFirstHigherAlertTime | read-only | current | Timestamp of ciritcal Percentage of Switching Fabric utilization |
| 1.3.6.1.4.1.2272.1.85.4.8 | ScalarrcKhiPerformanceSwitchFabricUtilStatus | read-only | current | Switch Fabric Utilization Status |
| 1.3.6.1.4.1.2272.1.85.4.9 | ScalarrcKhiPerformanceCurrentOtherSwitchFabricUtil | read-only | current | Current Percentage of Other Switching Fabric utilization |
| 1.3.6.1.4.1.2272.1.85.4.10 | ScalarrcKhiPerformanceFirstHigherOtherSwitchFabricUtil | read-only | current | FirstHigher Percentage of Other Switching Fabric utilization |
| 1.3.6.1.4.1.2272.1.85.4.11 | ScalarrcKhiPerformanceOtherSwitchFabricUtilFirstHigherAlertTime | read-only | current | Timestamp of ciritcal percentage of other Switching Fabric utilization |
| 1.3.6.1.4.1.2272.1.85.4.12 | ScalarrcKhiPerformanceOtherSwitchFabricUtilStatus | read-only | current | Other Switch Fabric Utilization Status |
| 1.3.6.1.4.1.2272.1.85.4.13 | ScalarrcKhiPerformanceCurrentBufferUtil | read-only | current | Current Percentage of buffer utilization |
| 1.3.6.1.4.1.2272.1.85.4.14 | ScalarrcKhiPerformanceFirstHigherBufferUtil | read-only | current | FirstHigher Percentage of buffer utilization |
| 1.3.6.1.4.1.2272.1.85.4.15 | ScalarrcKhiPerformanceBufferUtilFirstHigherAlertTime | read-only | current | Timestamp of critical Percentage of buffer utilization |
| 1.3.6.1.4.1.2272.1.85.4.16 | ScalarrcKhiPerformanceBufferUtilStatus | read-only | current | Buffer Utilization Status |
| 1.3.6.1.4.1.2272.1.85.4.17 | ScalarrcKhiPerformanceCurrentDRamUsed | read-only | current | Current Percentage of used DRAM in Kbytes |
| 1.3.6.1.4.1.2272.1.85.4.18 | ScalarrcKhiPerformanceFirstHigherDRamUsed | read-only | current | FirstHigher Percentage of used DRAM in Kbytes |
| 1.3.6.1.4.1.2272.1.85.4.19 | ScalarrcKhiPerformanceDRamUsedFirstHigherAlertTime | read-only | current | Timestamp of ciritcal percentage of used DRAM in Kbytes |
| 1.3.6.1.4.1.2272.1.85.4.20 | ScalarrcKhiPerformanceDRamUsedStatus | read-only | current | Dynamic Random Access Memory Utilization Status |
| 1.3.6.1.4.1.2272.1.85.4.21 | ScalarrcKhiPerformanceSuspendedTaskStatus | read-only | current | Suspended Tasks Status |
| 1.3.6.1.4.1.2272.1.85.4.22 | ScalarrcKhiPerformanceCPUControlFirstHigherAlertTime | read-only | current | Timestamp of First Higher Alert for CPU Control |
| 1.3.6.1.4.1.2272.1.85.4.23 | ScalarrcKhiPerformanceCPUControlStatus | read-only | current | CPU Control Status |
| 1.3.6.1.4.1.2272.1.85.4.24 | ScalarrcKhiPerformanceCurrentNoFBuf | read-only | current | Current Number of None free buffer |
| 1.3.6.1.4.1.2272.1.85.4.25 | ScalarrcKhiPerformanceFirstHigherNoFBuf | read-only | current | FirstHigher Number of None free buffer |
| 1.3.6.1.4.1.2272.1.85.4.26 | ScalarrcKhiPerformanceCurrentTxPacketsDropped | read-only | current | Current Tx packet dropped |
| 1.3.6.1.4.1.2272.1.85.4.27 | ScalarrcKhiPerformanceFirstHigherTxPacketsDropped | read-only | current | FirstHigher Tx packet dropped |
| 1.3.6.1.4.1.2272.1.85.4.28 | ScalarrcKhiPerformanceCurrentOutError | read-only | current | Current Out errors |
| 1.3.6.1.4.1.2272.1.85.4.29 | ScalarrcKhiPerformanceFirstHigherOutError | read-only | current | FirstHigher Out errors |
| 1.3.6.1.4.1.2272.1.85.4.30 | TablercKhiPerformanceSuspendedTaskTable | not-accessible | current | Suspended tasks table |
| 1.3.6.1.4.1.2272.1.85.4.30.1 | RowrcKhiPerformanceSuspendedTaskEntry | not-accessible | current | Suspeded task table entry. |
| 1.3.6.1.4.1.2272.1.85.4.30.1.1 | ColumnrcKhiPerformanceSuspendedTaskIndex | not-accessible | current | An unique index used to identify a particular supended task index |
| 1.3.6.1.4.1.2272.1.85.4.30.1.2 | ColumnrcKhiPerformanceSuspendedTaskId | read-only | current | An unique task id of suspeded task |
| 1.3.6.1.4.1.2272.1.85.4.30.1.3 | ColumnrcKhiPerformanceSuspendedTaskName | read-only | current | An unique task id of suspeded task |
| 1.3.6.1.4.1.2272.1.85.4.30.1.4 | ColumnrcKhiPerformanceSuspendedTaskSuspendedTime | read-only | current | Suspeded task time |
| 1.3.6.1.4.1.2272.1.85.4.31 | TablercKhiPerformanceHistoryTable | not-accessible | current | Performance History table |
| 1.3.6.1.4.1.2272.1.85.4.31.1 | RowrcKhiPerformanceHistoryEntry | not-accessible | current | History Performance table entry. |
| 1.3.6.1.4.1.2272.1.85.4.31.1.1 | ColumnrcKhiPerformanceHistoryIndex | not-accessible | current | An unique index used to identify a particular performance history record |
| 1.3.6.1.4.1.2272.1.85.4.31.1.2 | ColumnrcKhiPerformanceHistoryCpuUtil | read-only | current | History record for CPU utilization |
| 1.3.6.1.4.1.2272.1.85.4.31.1.3 | ColumnrcKhiPerformanceHistoryCpuUtilTimeStamp | read-only | current | Timestamp of the historical cpu utilization |
| 1.3.6.1.4.1.2272.1.85.4.31.1.4 | ColumnrcKhiPerformanceHistorySwitchFabricUtil | read-only | current | History Percentage of Switching Fabric utilization |
| 1.3.6.1.4.1.2272.1.85.4.31.1.5 | ColumnrcKhiPerformanceHistorySwitchFabricUtilTimeStamp | read-only | current | Timestamp of the historical switch fabric Utilization |
| 1.3.6.1.4.1.2272.1.85.4.31.1.6 | ColumnrcKhiPerformanceHistoryOtherSwitchFabricUtil | read-only | current | History Percentage of Other Switching Fabric utilization |
| 1.3.6.1.4.1.2272.1.85.4.31.1.7 | ColumnrcKhiPerformanceHistoryOtherSwitchFabricUtilTimeStamp | read-only | current | Timestamp of the historical other switch fabric Utilization |
| 1.3.6.1.4.1.2272.1.85.4.31.1.8 | ColumnrcKhiPerformanceHistoryBufferUtil | read-only | current | History Percentage of Buffer utilization |
| 1.3.6.1.4.1.2272.1.85.4.31.1.9 | ColumnrcKhiPerformanceHistoryBufferUtilTimeStamp | read-only | current | Timestamp of the historical Buffer Utilization |
| 1.3.6.1.4.1.2272.1.85.4.31.1.10 | ColumnrcKhiPerformanceHistoryDRamUsed | read-only | current | History DRAM Used |
| 1.3.6.1.4.1.2272.1.85.4.31.1.11 | ColumnrcKhiPerformanceHistoryDRamUsedTimeStamp | read-only | current | Timestamp of the historical DRAM Used |
| 1.3.6.1.4.1.2272.1.85.4.31.1.12 | ColumnrcKhiPerformanceHistoryCPUControlTimeStamp | read-only | current | Timestamp of the historical CPU Control |
| 1.3.6.1.4.1.2272.1.85.4.31.1.13 | ColumnrcKhiPerformanceHistoryNoFBuf | read-only | current | History Number of None Free Buffer |
| 1.3.6.1.4.1.2272.1.85.4.31.1.14 | ColumnrcKhiPerformanceHistoryTxPacketsDropped | read-only | current | History Tx Packets Dropped |
| 1.3.6.1.4.1.2272.1.85.4.31.1.15 | ColumnrcKhiPerformanceHistoryOutError | read-only | current | History Out Errors |
| 1.3.6.1.4.1.2272.1.85.5 | NodercKhiPort | |||
| 1.3.6.1.4.1.2272.1.85.5.1 | NodercKhiPortSystemStats | |||
| 1.3.6.1.4.1.2272.1.85.5.1.1 | ScalarrcKhiPortSystemStatsTotalUnicastRxPkts | read-only | current | Total number of received Unicast packets within the past 2 minutes. |
| 1.3.6.1.4.1.2272.1.85.5.1.2 | ScalarrcKhiPortSystemStatsTotalUnicastTxPkts | read-only | current | Total number of transmitted Unicast packets within the past 2 minutes. |
| 1.3.6.1.4.1.2272.1.85.5.1.3 | ScalarrcKhiPortSystemStatsUnicastPktsTxRxRatio | read-only | current | Tx/Rx Ratio for Total Unicast Packets within the past 2 minutes. |
| 1.3.6.1.4.1.2272.1.85.5.1.4 | ScalarrcKhiPortSystemStatsUnicastPktsTxRxRatioHealthStatus | read-only | current | Health Indication for Unicast Packets Tx/Rx ratio. Green if the ratio is less than 5%. Yellow if it is between 5% and 50%. Red if it is greater than 50%. |
| 1.3.6.1.4.1.2272.1.85.5.1.5 | ScalarrcKhiPortSystemStatsTotalMulticastRxPkts | read-only | current | Total number of received Multicast packets within the past 2 minutes. |
| 1.3.6.1.4.1.2272.1.85.5.1.6 | ScalarrcKhiPortSystemStatsTotalMulticastTxPkts | read-only | current | Total number of transmitted Multicast packets within the past 2 minutes. |
| 1.3.6.1.4.1.2272.1.85.5.1.7 | ScalarrcKhiPortSystemStatsTotalBroadcastRxPkts | read-only | current | Total number of received Broadcast packets within the past 2 minutes. |
| 1.3.6.1.4.1.2272.1.85.5.1.8 | ScalarrcKhiPortSystemStatsTotalBroadcastTxPkts | read-only | current | Total number of transmitted Broadcast packets within the past 2 minutes. |
| 1.3.6.1.4.1.2272.1.85.5.2 | NodercKhiPortState | |||
| 1.3.6.1.4.1.2272.1.85.5.2.1 | ScalarrcKhiPortStateTotalPortsUp | read-only | current | Total number of ports that are administratively enabled and operationally up. |
| 1.3.6.1.4.1.2272.1.85.5.2.2 | ScalarrcKhiPortStatePortsUpList | read-only | current | List of ports that are administratively enabled and operationally up. |
| 1.3.6.1.4.1.2272.1.85.5.2.3 | ScalarrcKhiPortStatePortsUpReferenceList | read-only | current | Reference list of ports that are administratively enabled and operationally up. |
| 1.3.6.1.4.1.2272.1.85.5.2.4 | ScalarrcKhiPortStatePortsUpHealthStatus | read-only | current | Health Indication for Ports Up list. When a clear operation is issued, rcKhiPortStatePortsUpList is copied into rcKhiPortStatePortsUpReferenceList and will be … |
| 1.3.6.1.4.1.2272.1.85.5.2.5 | ScalarrcKhiPortStateTotalPortsDown | read-only | current | Total number of ports that are administratively enabled and operationally down. |
| 1.3.6.1.4.1.2272.1.85.5.2.6 | ScalarrcKhiPortStatePortsDownList | read-only | current | List of ports that are administratively enabled and operationally down. |
| 1.3.6.1.4.1.2272.1.85.5.2.7 | ScalarrcKhiPortStateTotalSmltPortsUp | read-only | current | Total number of SMLT ports that are administratively enabled and operationally up. |
| 1.3.6.1.4.1.2272.1.85.5.2.8 | ScalarrcKhiPortStateSmltPortsUpList | read-only | current | List of SMLT ports that are administratively enabled and operationally up. |
| 1.3.6.1.4.1.2272.1.85.5.2.9 | ScalarrcKhiPortStateSmltPortsUpReferenceList | read-only | current | Reference list of SMLT ports that are administratively enabled and operationally up. |
| 1.3.6.1.4.1.2272.1.85.5.2.10 | ScalarrcKhiPortStateSmltPortsUpHealthStatus | read-only | current | Health Indication for Ports Up list. When a clear operation is issued, rcKhiPortStateSmltPortsUpList is copied into rcKhiPortStateSmltPortsUpReferenceList and … |
| 1.3.6.1.4.1.2272.1.85.5.2.11 | ScalarrcKhiPortStateTotalSmltPortsDown | read-only | current | Total number of SMLT ports that are administratively enabled and operationally down. |
| 1.3.6.1.4.1.2272.1.85.5.2.12 | ScalarrcKhiPortStateSmltPortsDownList | read-only | current | List of SMLT ports that are administratively enabled and operationally down. |
| 1.3.6.1.4.1.2272.1.85.5.2.13 | ScalarrcKhiPortStateTotalIstPortsUp | read-only | current | Total number of IST ports that are administratively enabled and operationally up. |
| 1.3.6.1.4.1.2272.1.85.5.2.14 | ScalarrcKhiPortStateIstPortsUpList | read-only | current | List of IST ports that are administratively enabled and operationally up. |
| 1.3.6.1.4.1.2272.1.85.5.2.15 | ScalarrcKhiPortStateIstPortsUpReferenceList | read-only | current | Reference list of IST ports that are administratively enabled and operationally up. |
| 1.3.6.1.4.1.2272.1.85.5.2.16 | ScalarrcKhiPortStateIstPortsUpHealthStatus | read-only | current | Health Indication for Ports Up list. When a clear operation is issued, rcKhiPortStateIstPortsUpList is copied into rcKhiPortStateIstPortsUpReferenceList and wi… |
| 1.3.6.1.4.1.2272.1.85.5.2.17 | ScalarrcKhiPortStateTotalIstPortsDown | read-only | current | Total number of IST ports that are administratively enabled and operationally down. |
| 1.3.6.1.4.1.2272.1.85.5.2.18 | ScalarrcKhiPortStateIstPortsDownList | read-only | current | List of IST ports that are administratively enabled and operationally down. |
| 1.3.6.1.4.1.2272.1.85.5.2.19 | ScalarrcKhiPortStateTotalPortUpEvents | read-only | current | Total number of port up events. |
| 1.3.6.1.4.1.2272.1.85.5.2.20 | ScalarrcKhiPortStatePortUpEventList | read-only | current | List of ports that became operationally up. |
| 1.3.6.1.4.1.2272.1.85.5.2.21 | ScalarrcKhiPortStatePortUpEventsHealthStatus | read-only | current | Port Up Events Health Indication. |
| 1.3.6.1.4.1.2272.1.85.5.2.22 | ScalarrcKhiPortStatePortUpEventFirstEventTs | read-only | current | Timestamp of the first occurence of a port up event after reboot or clear. |
| 1.3.6.1.4.1.2272.1.85.5.2.23 | ScalarrcKhiPortStateTotalPortDownEvents | read-only | current | Total number of port down events. |
| 1.3.6.1.4.1.2272.1.85.5.2.24 | ScalarrcKhiPortStatePortDownEventList | read-only | current | List of ports that became operationally down. |
| 1.3.6.1.4.1.2272.1.85.5.2.25 | ScalarrcKhiPortStatePortDownEventsHealthStatus | read-only | current | Port Down Events Health Indication. |
| 1.3.6.1.4.1.2272.1.85.5.2.26 | ScalarrcKhiPortStatePortDownEventFirstEventTs | read-only | current | Timestamp of the first occurence of a port down event after reboot or clear. |
| 1.3.6.1.4.1.2272.1.85.5.2.27 | ScalarrcKhiPortStateTotalSmltPortUpEvents | read-only | current | Total number of SMLT port up events. |
| 1.3.6.1.4.1.2272.1.85.5.2.28 | ScalarrcKhiPortStateSmltPortUpEventList | read-only | current | List of SMLT ports that became operationally up. |
| 1.3.6.1.4.1.2272.1.85.5.2.29 | ScalarrcKhiPortStateSmltPortUpEventsHealthStatus | read-only | current | SMLT Port Up Events Health Indication. |
| 1.3.6.1.4.1.2272.1.85.5.2.30 | ScalarrcKhiPortStateSmltPortUpEventFirstEventTs | read-only | current | Timestamp of the first occurence of a SMLT port up event after reboot or clear. |
| 1.3.6.1.4.1.2272.1.85.5.2.31 | ScalarrcKhiPortStateTotalSmltPortDownEvents | read-only | current | Total number of SMLT port down events. |
| 1.3.6.1.4.1.2272.1.85.5.2.32 | ScalarrcKhiPortStateSmltPortDownEventList | read-only | current | List of SMLT ports that became operationally down. |
| 1.3.6.1.4.1.2272.1.85.5.2.33 | ScalarrcKhiPortStateSmltPortDownEventsHealthStatus | read-only | current | SMLT Port Down Events Health Indication. |
| 1.3.6.1.4.1.2272.1.85.5.2.34 | ScalarrcKhiPortStateSmltPortDownEventFirstEventTs | read-only | current | Timestamp of the first occurence of an SMLT port down event after reboot or clear. |
| 1.3.6.1.4.1.2272.1.85.5.2.35 | ScalarrcKhiPortStateTotalIstPortUpEvents | read-only | current | Total number of SMLT port up events. |
| 1.3.6.1.4.1.2272.1.85.5.2.36 | ScalarrcKhiPortStateIstPortUpEventList | read-only | current | List of SMLT ports that became operationally up. |
| 1.3.6.1.4.1.2272.1.85.5.2.37 | ScalarrcKhiPortStateIstPortUpEventsHealthStatus | read-only | current | IST Port Up Events Health Indication. |
| 1.3.6.1.4.1.2272.1.85.5.2.38 | ScalarrcKhiPortStateIstPortUpEventFirstEventTs | read-only | current | Timestamp of the first occurence of a IST port up event after reboot or clear. |
| 1.3.6.1.4.1.2272.1.85.5.2.39 | ScalarrcKhiPortStateTotalIstPortDownEvents | read-only | current | Total number of SMLT port down events. |
| 1.3.6.1.4.1.2272.1.85.5.2.40 | ScalarrcKhiPortStateIstPortDownEventList | read-only | current | List of SMLT ports that became operationally down. |
| 1.3.6.1.4.1.2272.1.85.5.2.41 | ScalarrcKhiPortStateIstPortDownEventsHealthStatus | read-only | current | IST Port Down Events Health Indication. |
| 1.3.6.1.4.1.2272.1.85.5.2.42 | ScalarrcKhiPortStateIstPortDownEventFirstEventTs | read-only | current | Timestamp of the first occurence of an IST port down event after reboot or clear. |
| 1.3.6.1.4.1.2272.1.85.5.2.43 | TablercKhiPortStateEventsHistoryTable | not-accessible | current | Port State Events Historical Data. |
| 1.3.6.1.4.1.2272.1.85.5.2.43.1 | RowrcKhiPortStateEventsHistoryEntry | not-accessible | current | Port State Events history table entry. |
| 1.3.6.1.4.1.2272.1.85.5.2.43.1.1 | ColumnrcKhiPortStateEventsHistoryIndex | not-accessible | current | Historical data index number. |
| 1.3.6.1.4.1.2272.1.85.5.2.43.1.2 | ColumnrcKhiPortStateEventsHistoryTimestamp | read-only | current | Timestamp indicating when the event occurred. |
| 1.3.6.1.4.1.2272.1.85.5.2.43.1.3 | ColumnrcKhiPortStateEventsHistoryPort | read-only | current | Port number where the event occurred. |
| 1.3.6.1.4.1.2272.1.85.5.2.43.1.4 | ColumnrcKhiPortStateEventsHistoryEvent | read-only | current | Indication about the event-type. |
| 1.3.6.1.4.1.2272.1.85.5.3 | NodercKhiPortErrors | |||
| 1.3.6.1.4.1.2272.1.85.5.3.1 | TablercKhiPortErrorsEventsTable | not-accessible | current | Port Error Events Data. |
| 1.3.6.1.4.1.2272.1.85.5.3.1.1 | RowrcKhiPortErrorsEventsEntry | not-accessible | current | Port error events table entry. |
| 1.3.6.1.4.1.2272.1.85.5.3.1.1.1 | ColumnrcKhiPortErrorsEventsPortNum | read-only | current | Port number where the event occurred. |
| 1.3.6.1.4.1.2272.1.85.5.3.1.1.2 | ColumnrcKhiPortErrorsEventsSingleCollisionErr | read-only | current | Health Indication for Single Collisions errors on the port. |
| 1.3.6.1.4.1.2272.1.85.5.3.1.1.3 | ColumnrcKhiPortErrorsEventsMultipleCollisionErr | read-only | current | Health Indication for Multiple Collisions errors on the port. |
| 1.3.6.1.4.1.2272.1.85.5.3.1.1.4 | ColumnrcKhiPortErrorsEventsLateCollisionErr | read-only | current | Health Indication for Late Collisions errors on the port. |
| 1.3.6.1.4.1.2272.1.85.5.3.1.1.5 | ColumnrcKhiPortErrorsEventsExcessiveCollisionErr | read-only | current | Health Indication for Excessive Collisions errors on the port. |
| 1.3.6.1.4.1.2272.1.85.5.3.1.1.6 | ColumnrcKhiPortErrorsEventsMacRxErr | read-only | current | Health Indication for Mac Rx errors on the port. |
| 1.3.6.1.4.1.2272.1.85.5.3.1.1.7 | ColumnrcKhiPortErrorsEventsMacTxErr | read-only | current | Health Indication for Mac Tx errors on the port. |
| 1.3.6.1.4.1.2272.1.85.5.3.1.1.8 | ColumnrcKhiPortErrorsEventsDeferTxErr | read-only | current | Health Indication for Defer Tx errors on the port. |
| 1.3.6.1.4.1.2272.1.85.5.3.1.1.9 | ColumnrcKhiPortErrorsEventsPacketErr | read-only | current | Health Indication for Packet errors on the port. |
| 1.3.6.1.4.1.2272.1.85.5.3.1.1.10 | ColumnrcKhiPortErrorsEventsLinkInactiveErr | read-only | current | Health Indication for Link Inactive errors on the port. |
| 1.3.6.1.4.1.2272.1.85.5.3.1.1.11 | ColumnrcKhiPortErrorsEventsUnknownProtoErr | read-only | current | Health Indication for Unknown Proto errors on the port. |
| 1.3.6.1.4.1.2272.1.85.5.3.1.1.12 | ColumnrcKhiPortErrorsEventsInFlwctrlErr | read-only | current | Health Indication for In Flwctrl errors on the port. |
| 1.3.6.1.4.1.2272.1.85.5.3.1.1.13 | ColumnrcKhiPortErrorsEventsOutFlwctrlErr | read-only | current | Health Indication for Out Flwctrl errors on the port. |
| 1.3.6.1.4.1.2272.1.85.5.3.1.1.14 | ColumnrcKhiPortErrorsEventsAlignErr | read-only | current | Health Indication for Align errors on the port. |
| 1.3.6.1.4.1.2272.1.85.5.3.1.1.15 | ColumnrcKhiPortErrorsEventsFCSErr | read-only | current | Health Indication for FCS errors on the port. |
| 1.3.6.1.4.1.2272.1.85.5.3.1.1.16 | ColumnrcKhiPortErrorsEventsFramesLongErr | read-only | current | Health Indication for Frames Long errors on the port. |
| 1.3.6.1.4.1.2272.1.85.5.3.1.1.17 | ColumnrcKhiPortErrorsEventsTooShortErr | read-only | current | Health Indication for Too Short errors on the port. |
| 1.3.6.1.4.1.2272.1.85.5.3.1.1.18 | ColumnrcKhiPortErrorsEventsLinkFailureErr | read-only | current | Health Indication for Link Failure errors on the port. |
| 1.3.6.1.4.1.2272.1.85.5.3.1.1.19 | ColumnrcKhiPortErrorsEventsCarrierSenseErr | read-only | current | Health Indication for Carrier Sense errors on the port. |
| 1.3.6.1.4.1.2272.1.85.5.3.1.1.20 | ColumnrcKhiPortErrorsEventsCarrierErr | read-only | current | Health Indication for Carrier errors on the port. |
| 1.3.6.1.4.1.2272.1.85.5.3.1.1.21 | ColumnrcKhiPortErrorsEventsSQETestErr | read-only | current | Health Indication for SQE Test errors on the port. |
| 1.3.6.1.4.1.2272.1.85.5.3.2 | TablercKhiPortErrorsHistoryTable | not-accessible | current | Port Errors Historical Data. |
| 1.3.6.1.4.1.2272.1.85.5.3.2.1 | RowrcKhiPortErrorsHistoryEntry | not-accessible | current | Port errors history table entry. |
| 1.3.6.1.4.1.2272.1.85.5.3.2.1.1 | ColumnrcKhiPortErrorsHistoryIndex | not-accessible | current | Index number. |
| 1.3.6.1.4.1.2272.1.85.5.3.2.1.2 | ColumnrcKhiPortErrorsHistoryTimestamp | read-only | current | Timestamp indicating when the event occurred. |
| 1.3.6.1.4.1.2272.1.85.5.3.2.1.3 | ColumnrcKhiPortErrorsHistoryPort | read-only | current | Port number where the event occurred. |
| 1.3.6.1.4.1.2272.1.85.5.3.2.1.4 | ColumnrcKhiPortErrorsHistoryErrorEvents | read-only | current | This is used to specify the port error information. bit 0 - Single Collision Errors bit 1 - Multiple Collision Errors bit 2 - Late Collision Errors bit 3 - Exc… |
| 1.3.6.1.4.1.2272.1.85.6 | NodercKhiForwarding | |||
| 1.3.6.1.4.1.2272.1.85.6.1 | TablercKhiForwardingAsicHealthTable | not-accessible | current | Forwarding Asic Key Health Indicator MIB. |
| 1.3.6.1.4.1.2272.1.85.6.1.1 | RowrcKhiForwardingAsicHealthEntry | not-accessible | current | Forwarding KHI - Asic Health table entry. |
| 1.3.6.1.4.1.2272.1.85.6.1.1.1 | ColumnrcKhiForwardingAsicHealthSlotNumber | not-accessible | current | Slot Number. |
| 1.3.6.1.4.1.2272.1.85.6.1.1.2 | ColumnrcKhiForwardingAsicHealthLeftLnIngBkPrsureRstCnt | read-only | current | Total number of Left Lane Ingress RSP Combined Back Pressure Resets. |
| 1.3.6.1.4.1.2272.1.85.6.1.1.3 | ColumnrcKhiForwardingAsicHealthMidLnIngBkPrsureRstCnt | read-only | current | Total number of Middle Lane Ingress RSP Combined Back Pressure Resets. |
| 1.3.6.1.4.1.2272.1.85.6.1.1.4 | ColumnrcKhiForwardingAsicHealthRightLnIngBkPrsureRstCnt | read-only | current | Total number of Right Lane Ingress RSP Combined Back Pressure Resets. |
| 1.3.6.1.4.1.2272.1.85.6.1.1.5 | ColumnrcKhiForwardingAsicHealthLeftLnIngBkPrsureRstStatus | read-only | current | Left Lane Ingress RSP Back Pressure Resets Health Indication. A zero count would indicate a Health Status of Green and a non-zero count would indicate a Red. |
| 1.3.6.1.4.1.2272.1.85.6.1.1.6 | ColumnrcKhiForwardingAsicHealthMidLnIngBkPrsureRstStatus | read-only | current | Middle Lane ngress RSP Back Pressure Resets Health Indication. A zero count would indicate a Health Status of Green and a non-zero count would indicate a Red. |
| 1.3.6.1.4.1.2272.1.85.6.1.1.7 | ColumnrcKhiForwardingAsicHealthRightLnIngBkPrsureRstStatus | read-only | current | Right Lane Ingress RSP Back Pressure Resets Health Indication. A zero count would indicate a Health Status of Green and a non-zero count would indicate a Red. |
| 1.3.6.1.4.1.2272.1.85.6.1.1.8 | ColumnrcKhiForwardingAsicHealthLeftLnIngSPIProtoRstCnt | read-only | current | Total number of Left Lane Ingress RSP SPI Protocol Resets. |
| 1.3.6.1.4.1.2272.1.85.6.1.1.9 | ColumnrcKhiForwardingAsicHealthMidLnIngSPIProtoRstCnt | read-only | current | Total number of Middle Lane Ingress RSP SPI Protocol Resets. |
| 1.3.6.1.4.1.2272.1.85.6.1.1.10 | ColumnrcKhiForwardingAsicHealthRightLnIngSPIProtoRstCnt | read-only | current | Total number of Right Lane Ingress RSP SPI Protocol Resets. |
| 1.3.6.1.4.1.2272.1.85.6.1.1.11 | ColumnrcKhiForwardingAsicHealthLeftLnIngSPIProtoRstStatus | read-only | current | Left Lane Ingress RSP SPI Protocol Resets Health Indication. A zero count would indicate a Health Status of Green and a non-zero count would indicate a Red. |
| 1.3.6.1.4.1.2272.1.85.6.1.1.12 | ColumnrcKhiForwardingAsicHealthMidLnIngSPIProtoRstStatus | read-only | current | Middle Lane Ingress RSP SPI Protocol Resets Health Indication. A zero count would indicate a Health Status of Green and a non-zero count would indicate a Red. |
| 1.3.6.1.4.1.2272.1.85.6.1.1.13 | ColumnrcKhiForwardingAsicHealthRightLnIngSPIProtoRstStatus | read-only | current | Right Lane Ingress RSP SPI Protocol Resets Health Indication. A zero count would indicate a Health Status of Green and a non-zero count would indicate a Red. |
| 1.3.6.1.4.1.2272.1.85.6.1.1.14 | ColumnrcKhiForwardingAsicHealthLeftLnIngSPIDefragCnt | read-only | current | Total number of Left Lane Ingress RSP SPI Defrag Resets. |
| 1.3.6.1.4.1.2272.1.85.6.1.1.15 | ColumnrcKhiForwardingAsicHealthMidLnIngSPIDefragCnt | read-only | current | Total number of Middle Lane Ingress RSP SPI Defrag Resets. |
| 1.3.6.1.4.1.2272.1.85.6.1.1.16 | ColumnrcKhiForwardingAsicHealthRightLnIngSPIDefragCnt | read-only | current | Total number of Right Lane Ingress RSP SPI Defrag Resets. |
| 1.3.6.1.4.1.2272.1.85.6.1.1.17 | ColumnrcKhiForwardingAsicHealthLeftLnIngSPIDefragStatus | read-only | current | Left Lane Ingress RSP SPI Defrag Health Indication. A zero count would indicate a Health Status of Green and a non-zero count would indicate a Red. |
| 1.3.6.1.4.1.2272.1.85.6.1.1.18 | ColumnrcKhiForwardingAsicHealthMidLnIngSPIDefragStatus | read-only | current | Middle Lane Ingress RSP SPI Defrag Health Indication. A zero count would indicate a Health Status of Green and a non-zero count would indicate a Red. |
| 1.3.6.1.4.1.2272.1.85.6.1.1.19 | ColumnrcKhiForwardingAsicHealthRightLnIngSPIDefragStatus | read-only | current | Right Lane Ingress RSP SPI Defrag Health Indication. A zero count would indicate a Health Status of Green and a non-zero count would indicate a Red. |
| 1.3.6.1.4.1.2272.1.85.6.1.1.20 | ColumnrcKhiForwardingAsicHealthLeftLnEgrMcastQFullRstCnt | read-only | current | Total number of Left Lane Egress RSP Multicast Queue Full Resets. |
| 1.3.6.1.4.1.2272.1.85.6.1.1.21 | ColumnrcKhiForwardingAsicHealthMidLnEgrMcastQFullRstCnt | read-only | current | Total number of Middle Lane Egress RSP Multicast Queue Full Resets. |
| 1.3.6.1.4.1.2272.1.85.6.1.1.22 | ColumnrcKhiForwardingAsicHealthRightLnEgrMcastQFullRstCnt | read-only | current | Total number of Right Lane Egress RSP Multicast Queue Full Resets. |
| 1.3.6.1.4.1.2272.1.85.6.1.1.23 | ColumnrcKhiForwardingAsicHealthLeftLnEgrMcastQFullRstStatus | read-only | current | Left Lane Egress RSP Multicast Queue Full Resets Health Indication. A zero count would indicate a Health Status of Green and a non-zero count would indicate a … |
| 1.3.6.1.4.1.2272.1.85.6.1.1.24 | ColumnrcKhiForwardingAsicHealthMidLnEgrMcastQFullRstStatus | read-only | current | Middle Lane Egress RSP Multicast Queue Full Resets Health Indication. A zero count would indicate a Health Status of Green and a non-zero count would indicate … |
| 1.3.6.1.4.1.2272.1.85.6.1.1.25 | ColumnrcKhiForwardingAsicHealthRightLnEgrMcastQFullRstStatus | read-only | current | Right Lane Egress RSP Multicast Queue Full Resets Health Indication. A zero count would indicate a Health Status of Green and a non-zero count would indicate a… |
| 1.3.6.1.4.1.2272.1.85.6.1.1.26 | ColumnrcKhiForwardingAsicHealthLeftLnEgrFreePgErrRstCnt | read-only | current | Total number of Left Lane Egress RSP Free Page Error Resets. |
| 1.3.6.1.4.1.2272.1.85.6.1.1.27 | ColumnrcKhiForwardingAsicHealthMidLnEgrFreePgErrRstCnt | read-only | current | Total number of Middle Lane Egress RSP Free Page Error Resets. |
| 1.3.6.1.4.1.2272.1.85.6.1.1.28 | ColumnrcKhiForwardingAsicHealthRightLnEgrFreePgErrRstCnt | read-only | current | Total number of Right Lane Egress RSP Free Page Error Resets. |
| 1.3.6.1.4.1.2272.1.85.6.1.1.29 | ColumnrcKhiForwardingAsicHealthLeftLnEgrFreePgErrRstStatus | read-only | current | Left Lane Egress RSP Free Page Error Resets Health Indication. A zero count would indicate a Health Status of Green and a non-zero count would indicate a Red. |
| 1.3.6.1.4.1.2272.1.85.6.1.1.30 | ColumnrcKhiForwardingAsicHealthMidLnEgrFreePgErrRstStatus | read-only | current | Middle Lane Egress RSP Free Page Error Resets Health Indication. A zero count would indicate a Health Status of Green and a non-zero count would indicate a Red. |
| 1.3.6.1.4.1.2272.1.85.6.1.1.31 | ColumnrcKhiForwardingAsicHealthRightLnEgrFreePgErrRstStatus | read-only | current | Left Lane Egress RSP Free Page Error Resets Health Indication. A zero count would indicate a Health Status of Green and a non-zero count would indicate a Red. |
| 1.3.6.1.4.1.2272.1.85.6.1.1.32 | ColumnrcKhiForwardingAsicHealthLeftLnEgrUcastQFullRstCnt | read-only | current | Total number of Left Lane Egress RSP Unicast Queue Full Resets. |
| 1.3.6.1.4.1.2272.1.85.6.1.1.33 | ColumnrcKhiForwardingAsicHealthMidLnEgrUcastQFullRstCnt | read-only | current | Total number of Middle Lane Egress RSP Unicast Queue Full Resets. |
| 1.3.6.1.4.1.2272.1.85.6.1.1.34 | ColumnrcKhiForwardingAsicHealthRightLnEgrUcastQFullRstCnt | read-only | current | Total number of Right Lane Egress RSP Unicast Queue Full Resets. |
| 1.3.6.1.4.1.2272.1.85.6.1.1.35 | ColumnrcKhiForwardingAsicHealthLeftLnEgrUcastQFullRstStatus | read-only | current | Left Lane Egress RSP Unicast Queue Full Resets Health Indication. A zero count would indicate a Health Status of Green and a non-zero count would indicate a Re… |
| 1.3.6.1.4.1.2272.1.85.6.1.1.36 | ColumnrcKhiForwardingAsicHealthMidLnEgrUcastQFullRstStatus | read-only | current | Middle Lane Egress RSP Unicast Queue Full Resets Health Indication. A zero count would indicate a Health Status of Green and a non-zero count would indicate a … |
| 1.3.6.1.4.1.2272.1.85.6.1.1.37 | ColumnrcKhiForwardingAsicHealthRightLnEgrUcastQFullRstStatus | read-only | current | Right Lane Egress RSP Unicast Queue Full Resets Health Indication. A zero count would indicate a Health Status of Green and a non-zero count would indicate a R… |
| 1.3.6.1.4.1.2272.1.85.6.1.1.39 | ColumnrcKhiForwardingAsicHealthLeftLnEgrFreePgLwrLmtRstCnt | read-only | current | Total number of Left Lane Egress RSP Free Pages at Lower Limit Resets. |
| 1.3.6.1.4.1.2272.1.85.6.1.1.40 | ColumnrcKhiForwardingAsicHealthMidLnEgrFreePgLwrLmtRstCnt | read-only | current | Total number of Middle Lane Egress RSP Free Pages at Lower Limit Resets. |
| 1.3.6.1.4.1.2272.1.85.6.1.1.41 | ColumnrcKhiForwardingAsicHealthRightLnEgrFreePgLwrLmtRstCnt | read-only | current | Total number of Right Lane Egress RSP Free Pages at Lower Limit Resets. |
| 1.3.6.1.4.1.2272.1.85.6.1.1.42 | ColumnrcKhiForwardingAsicHealthLeftLnEgrFreePgLwrLmtStatus | read-only | current | Left Lane Egress RSP Free Pages at Lower Limit Resets Health Indication. A zero count would indicate a Health Status of Green and a non-zero count would indica… |
| 1.3.6.1.4.1.2272.1.85.6.1.1.43 | ColumnrcKhiForwardingAsicHealthMidLnEgrFreePgLwrLmtStatus | read-only | current | Middle Lane Egress RSP Free Pages at Lower Limit Resets Health Indication. A zero count would indicate a Health Status of Green and a non-zero count would indi… |
| 1.3.6.1.4.1.2272.1.85.6.1.1.44 | ColumnrcKhiForwardingAsicHealthRightLnEgrFreePgLwrLmtStatus | read-only | current | Right Lane Egress RSP Free Pages at Lower Limit Resets Health Indication. A zero count would indicate a Health Status of Green and a non-zero count would indic… |
| 1.3.6.1.4.1.2272.1.85.6.1.1.45 | ColumnrcKhiForwardingAsicHealthLeftLnEgrRepIDMismatchRstCnt | read-only | current | Total number of Left Lane Egress RSP Replication ID Mismatch Resets. |
| 1.3.6.1.4.1.2272.1.85.6.1.1.46 | ColumnrcKhiForwardingAsicHealthMidLnEgrRepIDMismatchRstCnt | read-only | current | Total number of Middle Lane Egress RSP Replication ID Mismatch Resets. |
| 1.3.6.1.4.1.2272.1.85.6.1.1.47 | ColumnrcKhiForwardingAsicHealthRightLnEgrRepIDMismatchRstCnt | read-only | current | Total number of Right Lane Egress RSP Replication ID Mismatch Resets. |
| 1.3.6.1.4.1.2272.1.85.6.1.1.48 | ColumnrcKhiForwardingAsicHealthLeftLnEgrRepIDMismatchStatus | read-only | current | Left Lane Egress RSP Replication ID Mismatch Resets Health Indication. A zero count would indicate a Health Status of Green and a non-zero count would indicate… |
| 1.3.6.1.4.1.2272.1.85.6.1.1.49 | ColumnrcKhiForwardingAsicHealthMidLnEgrRepIDMismatchStatus | read-only | current | Middle Lane Egress RSP Replication ID Mismatch Resets Health Indication. A zero count would indicate a Health Status of Green and a non-zero count would indica… |
| 1.3.6.1.4.1.2272.1.85.6.1.1.50 | ColumnrcKhiForwardingAsicHealthRightLnEgrRepIDMismatchStatus | read-only | current | Right Lane Egress RSP Replication ID Mismatch Resets Health Indication. A zero count would indicate a Health Status of Green and a non-zero count would indicat… |
| 1.3.6.1.4.1.2272.1.85.6.1.1.51 | ColumnrcKhiForwardingAsicHealthLeftLnEgrNoBeepBeepRstCnt | read-only | current | Total number of Left Lane Egress RSP No Beep-Beep Resets. |
| 1.3.6.1.4.1.2272.1.85.6.1.1.52 | ColumnrcKhiForwardingAsicHealthMidLnEgrNoBeepBeepRstCnt | read-only | current | Total number of Middle Lane Egress RSP No Beep-Beep Resets. |
| 1.3.6.1.4.1.2272.1.85.6.1.1.53 | ColumnrcKhiForwardingAsicHealthRightLnEgrNoBeepBeepRstCnt | read-only | current | Total number of Right Lane Egress RSP No Beep-Beep Resets. |
| 1.3.6.1.4.1.2272.1.85.6.1.1.54 | ColumnrcKhiForwardingAsicHealthLeftLnEgrNoBeepBeepStatus | read-only | current | Left Lane Egress RSP No Beep-Beep Resets Health Indication. A zero count would indicate a Health Status of Green and a non-zero count would indicate a Red. |
| 1.3.6.1.4.1.2272.1.85.6.1.1.55 | ColumnrcKhiForwardingAsicHealthMidLnEgrNoBeepBeepStatus | read-only | current | Middle Lane Egress RSP No Beep-Beep Resets Health Indication. A zero count would indicate a Health Status of Green and a non-zero count would indicate a Red. |
| 1.3.6.1.4.1.2272.1.85.6.1.1.56 | ColumnrcKhiForwardingAsicHealthRightLnEgrNoBeepBeepStatus | read-only | current | Right Lane Egress RSP No Beep-Beep Resets Health Indication. A zero count would indicate a Health Status of Green and a non-zero count would indicate a Red. |
| 1.3.6.1.4.1.2272.1.85.6.2 | TablercKhiForwardingRSPStateTable | not-accessible | current | Forwarding Key Health Indicator MIB - RSP Stats. |
| 1.3.6.1.4.1.2272.1.85.6.2.1 | RowrcKhiForwardingRSPStateEntry | not-accessible | current | Forwarding KHI - RSP State table entry. |
| 1.3.6.1.4.1.2272.1.85.6.2.1.1 | ColumnrcKhiForwardingRSPStateSlotNumber | not-accessible | current | Slot Number. |
| 1.3.6.1.4.1.2272.1.85.6.2.1.2 | ColumnrcKhiForwardingRSPStateDirection | not-accessible | current | Direction - Ingress or Egress. |
| 1.3.6.1.4.1.2272.1.85.6.2.1.3 | ColumnrcKhiForwardingRSPStateLeftLnErrMask | read-only | current | Left Lane RSP State Error Bit Mask. Each bit in the mask represents a specific error. Bit 0 - CIF Parity Error. Bit 1 - CIF Protocol Error. Bit 2 - EME0 Parity… |
| 1.3.6.1.4.1.2272.1.85.6.2.1.4 | ColumnrcKhiForwardingRSPStateMidLnErrMask | read-only | current | Middle Lane RSP State Error Bit Mask. Each bit in the mask represents a specific error. Bit 0 - CIF Parity Error. Bit 1 - CIF Protocol Error. Bit 2 - EME0 Pari… |
| 1.3.6.1.4.1.2272.1.85.6.2.1.5 | ColumnrcKhiForwardingRSPStateRightLnErrMask | read-only | current | Right Lane RSP State Error Bit Mask. Each bit in the mask represents a specific error. Bit 0 - CIF Parity Error. Bit 1 - CIF Protocol Error. Bit 2 - EME0 Parit… |
| 1.3.6.1.4.1.2272.1.85.6.2.1.6 | ColumnrcKhiForwardingRSPStateLeftLnHealthStatus | read-only | current | Indicates the Left Lane RSP-State Health as Green/Yellow/Red. If multiple events with different health status occurs at the same time, the highest health statu… |
| 1.3.6.1.4.1.2272.1.85.6.2.1.7 | ColumnrcKhiForwardingRSPStateMidLnHealthStatus | read-only | current | Indicates the Middle Lane RSP-State Health as Green/Yellow/Red. If multiple events with different health status occurs at the same time, the highest health sta… |
| 1.3.6.1.4.1.2272.1.85.6.2.1.8 | ColumnrcKhiForwardingRSPStateRightLnHealthStatus | read-only | current | Indicates the Right Lane RSP-State Health as Green/Yellow/Red. If multiple events with different health status occurs at the same time, the highest health stat… |
| 1.3.6.1.4.1.2272.1.85.6.3 | TablercKhiForwardingRSPStatsTable | not-accessible | current | Forwarding Key Health Indicator MIB - RSP Stats. |
| 1.3.6.1.4.1.2272.1.85.6.3.1 | RowrcKhiForwardingRSPStatsEntry | not-accessible | current | Forwarding KHI - RSP Stats table entry. |
| 1.3.6.1.4.1.2272.1.85.6.3.1.1 | ColumnrcKhiForwardingRSPStatsSlotNumber | not-accessible | current | Slot Number. |
| 1.3.6.1.4.1.2272.1.85.6.3.1.2 | ColumnrcKhiForwardingRSPStatsDirection | not-accessible | current | Direction - Ingress or Egress. |
| 1.3.6.1.4.1.2272.1.85.6.3.1.3 | ColumnrcKhiForwardingRSPStatsLeftLnTotalAMPkts | read-only | current | Left Lane RSP Total AM Packets. |
| 1.3.6.1.4.1.2272.1.85.6.3.1.4 | ColumnrcKhiForwardingRSPStatsMidLnTotalAMPkts | read-only | current | Middle Lane RSP Total AM Packets. |
| 1.3.6.1.4.1.2272.1.85.6.3.1.5 | ColumnrcKhiForwardingRSPStatsRightLnTotalAMPkts | read-only | current | Right Lane RSP Total AM Packets. |
| 1.3.6.1.4.1.2272.1.85.6.3.1.6 | ColumnrcKhiForwardingRSPStatsLeftLnTotalAMRxErrPkts | read-only | current | Left Lane RSP Total AM Rx Error Packets Count. |
| 1.3.6.1.4.1.2272.1.85.6.3.1.7 | ColumnrcKhiForwardingRSPStatsMidLnTotalAMRxErrPkts | read-only | current | Middle Lane RSP Total AM Rx Error Packets Count. |
| 1.3.6.1.4.1.2272.1.85.6.3.1.8 | ColumnrcKhiForwardingRSPStatsRightLnTotalAMRxErrPkts | read-only | current | Right Lane RSP Total AM Rx Error Packets Count. |
| 1.3.6.1.4.1.2272.1.85.6.3.1.9 | ColumnrcKhiForwardingRSPStatsLeftLnAMRxErrPktsStatus | read-only | current | Left Lane RSP Total AM Rx Error Packets Health Status. A zero count would indicate a Health Status of Green and a non-zero count would indicate a Red. |
| 1.3.6.1.4.1.2272.1.85.6.3.1.10 | ColumnrcKhiForwardingRSPStatsMidLnAMRxErrPktsStatus | read-only | current | Middle Lane RSP Total AM Rx Error Packets Health Status. A zero count would indicate a Health Status of Green and a non-zero count would indicate a Red. |
| 1.3.6.1.4.1.2272.1.85.6.3.1.11 | ColumnrcKhiForwardingRSPStatsRightLnAMRxErrPktsStatus | read-only | current | Right Lane RSP Total AM Rx Error Packets Health Status. A zero count would indicate a Health Status of Green and a non-zero count would indicate a Red. |
| 1.3.6.1.4.1.2272.1.85.6.3.1.12 | ColumnrcKhiForwardingRSPStatsLeftLnTotalAMShortPkts | read-only | current | Left Lane RSP Total AM Short Packets Count. |
| 1.3.6.1.4.1.2272.1.85.6.3.1.13 | ColumnrcKhiForwardingRSPStatsMidLnTotalAMShortPkts | read-only | current | Middle Lane RSP Total AM Short Packets Count. |
| 1.3.6.1.4.1.2272.1.85.6.3.1.14 | ColumnrcKhiForwardingRSPStatsRightLnTotalAMShortPkts | read-only | current | Right Lane RSP Total AM Short Packets Count. |
| 1.3.6.1.4.1.2272.1.85.6.3.1.15 | ColumnrcKhiForwardingRSPStatsLeftLnAMShortPktsStatus | read-only | current | Left Lane RSP Total AM Short Packets Health Status. A zero count would indicate a Health Status of Green and a non-zero count would indicate a Red. |
| 1.3.6.1.4.1.2272.1.85.6.3.1.16 | ColumnrcKhiForwardingRSPStatsMidLnAMShortPktsStatus | read-only | current | Middle Lane RSP Total AM Short Packets Health Status. A zero count would indicate a Health Status of Green and a non-zero count would indicate a Red. |
| 1.3.6.1.4.1.2272.1.85.6.3.1.17 | ColumnrcKhiForwardingRSPStatsRightLnAMShortPktsStatus | read-only | current | Right Lane RSP Total AM Short Packets Health Status. A zero count would indicate a Health Status of Green and a non-zero count would indicate a Red. |
| 1.3.6.1.4.1.2272.1.85.6.3.1.18 | ColumnrcKhiForwardingRSPStatsLeftLnTotalAMCongestionDrops | read-only | current | Left Lane RSP Total AM Congestion Drop Count. |
| 1.3.6.1.4.1.2272.1.85.6.3.1.19 | ColumnrcKhiForwardingRSPStatsMidLnTotalAMCongestionDrops | read-only | current | Middle Lane RSP Total AM Congestion Drop Count. |
| 1.3.6.1.4.1.2272.1.85.6.3.1.20 | ColumnrcKhiForwardingRSPStatsRightLnTotalAMCongestionDrops | read-only | current | Right Lane RSP Total AM Congestion Drop Count. |
| 1.3.6.1.4.1.2272.1.85.6.3.1.21 | ColumnrcKhiForwardingRSPStatsLeftLnAMCongestionDropStatus | read-only | current | Left Lane RSP Total AM Congestion Drop Health Status. A zero count would indicate a Health Status of Green and a non-zero count would indicate a Yellow. |
| 1.3.6.1.4.1.2272.1.85.6.3.1.22 | ColumnrcKhiForwardingRSPStatsMidLnAMCongestionDropStatus | read-only | current | Middle Lane RSP Total AM Congestion Drop Health Status. A zero count would indicate a Health Status of Green and a non-zero count would indicate a Yellow. |
| 1.3.6.1.4.1.2272.1.85.6.3.1.23 | ColumnrcKhiForwardingRSPStatsRightLnAMCongestionDropStatus | read-only | current | Right Lane RSP Total AM Congestion Drop Health Status. A zero count would indicate a Health Status of Green and a non-zero count would indicate a Yellow. |
| 1.3.6.1.4.1.2272.1.85.6.3.1.24 | ColumnrcKhiForwardingRSPStatsLeftLnTotalAMProcErrPkts | read-only | current | Left Lane RSP Total AM Proc Error Packets Count. |
| 1.3.6.1.4.1.2272.1.85.6.3.1.25 | ColumnrcKhiForwardingRSPStatsMidLnTotalAMProcErrPkts | read-only | current | Middle Lane RSP Total AM Proc Error Packets Count. |
| 1.3.6.1.4.1.2272.1.85.6.3.1.26 | ColumnrcKhiForwardingRSPStatsRightLnTotalAMProcErrPkts | read-only | current | Right Lane RSP Total AM Proc Error Packets Count. |
| 1.3.6.1.4.1.2272.1.85.6.3.1.27 | ColumnrcKhiForwardingRSPStatsLeftLnAMProcErrPktsStatus | read-only | current | Left Lane RSP Total AM Proc Error Packets Health Status. A zero count would indicate a Health Status of Green and a non-zero count would indicate a Yellow. |
| 1.3.6.1.4.1.2272.1.85.6.3.1.28 | ColumnrcKhiForwardingRSPStatsMidLnAMProcErrPktsStatus | read-only | current | Middle Lane RSP Total AM Proc Error Packets Health Status. A zero count would indicate a Health Status of Green and a non-zero count would indicate a Yellow. |
| 1.3.6.1.4.1.2272.1.85.6.3.1.29 | ColumnrcKhiForwardingRSPStatsRightLnAMProcErrPktsStatus | read-only | current | Right Lane RSP Total AM Proc Error Packets Health Status. A zero count would indicate a Health Status of Green and a non-zero count would indicate a Yellow. |
| 1.3.6.1.4.1.2272.1.85.6.3.1.30 | ColumnrcKhiForwardingRSPStatsLeftLnTotalAMExpPkts | read-only | current | Left Lane RSP Total AM Exp Packets Count. |
| 1.3.6.1.4.1.2272.1.85.6.3.1.31 | ColumnrcKhiForwardingRSPStatsMidLnTotalAMExpPkts | read-only | current | Middle Lane RSP Total AM Exp Packets Count. |
| 1.3.6.1.4.1.2272.1.85.6.3.1.32 | ColumnrcKhiForwardingRSPStatsRightLnTotalAMExpPkts | read-only | current | Right Lane RSP Total AM Exp Packets Count. |
| 1.3.6.1.4.1.2272.1.85.6.3.1.33 | ColumnrcKhiForwardingRSPStatsLeftLnAMExpPktsStatus | read-only | current | Left Lane RSP Total AM Exp Packets Health Status. A zero count would indicate a Health Status of Green and a non-zero count would indicate a Yellow. |
| 1.3.6.1.4.1.2272.1.85.6.3.1.34 | ColumnrcKhiForwardingRSPStatsMidLnAMExpPktsStatus | read-only | current | Middle Lane RSP Total AM Exp Packets Health Status. A zero count would indicate a Health Status of Green and a non-zero count would indicate a Yellow. |
| 1.3.6.1.4.1.2272.1.85.6.3.1.35 | ColumnrcKhiForwardingRSPStatsRightLnAMExpPktsStatus | read-only | current | Right Lane RSP Total AM Exp Packets Health Status. A zero count would indicate a Health Status of Green and a non-zero count would indicate a Yellow. |
| 1.3.6.1.4.1.2272.1.85.6.3.1.36 | ColumnrcKhiForwardingRSPStatsLeftLnTotalPMFwdPkts | read-only | current | Left Lane RSP Total PM Forwarded Packets Count. |
| 1.3.6.1.4.1.2272.1.85.6.3.1.37 | ColumnrcKhiForwardingRSPStatsMidLnTotalPMFwdPkts | read-only | current | Middle Lane RSP Total PM Forwarded Packets Count. |
| 1.3.6.1.4.1.2272.1.85.6.3.1.38 | ColumnrcKhiForwardingRSPStatsRightLnTotalPMFwdPkts | read-only | current | Right Lane RSP Total PM Forwarded Packets Count. |
| 1.3.6.1.4.1.2272.1.85.6.3.1.39 | ColumnrcKhiForwardingRSPStatsLeftLnTotalPMDropErrPkts | read-only | current | Left Lane RSP Total PM Dropped Error Packets Count. |
| 1.3.6.1.4.1.2272.1.85.6.3.1.40 | ColumnrcKhiForwardingRSPStatsMidLnTotalPMDropErrPkts | read-only | current | Middle Lane RSP Total PM Dropped Error Packets Count. |
| 1.3.6.1.4.1.2272.1.85.6.3.1.41 | ColumnrcKhiForwardingRSPStatsRightLnTotalPMDropErrPkts | read-only | current | Right Lane RSP Total PM Dropped Error Packets Count. |
| 1.3.6.1.4.1.2272.1.85.6.3.1.42 | ColumnrcKhiForwardingRSPStatsLeftLnPMDropErrStatus | read-only | current | Left Lane RSP Total PM Dropped Error Packets Health Status. A zero count would indicate a Health Status of Green and a non-zero count would indicate a Yellow. |
| 1.3.6.1.4.1.2272.1.85.6.3.1.43 | ColumnrcKhiForwardingRSPStatsMidLnPMDropErrStatus | read-only | current | Middle Lane RSP Total PM Dropped Error Packets Health Status. A zero count would indicate a Health Status of Green and a non-zero count would indicate a Yellow. |
| 1.3.6.1.4.1.2272.1.85.6.3.1.44 | ColumnrcKhiForwardingRSPStatsRightLnPMDropErrStatus | read-only | current | Right Lane RSP Total PM Dropped Error Packets Health Status. A zero count would indicate a Health Status of Green and a non-zero count would indicate a Yellow. |
| 1.3.6.1.4.1.2272.1.85.6.4 | TablercKhiForwardingF2XHealthTable | not-accessible | current | Forwarding Key Health Indicator MIB - F2X (F2I and F2E) Health. |
| 1.3.6.1.4.1.2272.1.85.6.4.1 | RowrcKhiForwardingF2XHealthEntry | not-accessible | current | Forwarding KHI - F2X Health table entry. |
| 1.3.6.1.4.1.2272.1.85.6.4.1.1 | ColumnrcKhiForwardingF2XHealthSlotNumber | not-accessible | current | Slot Number. |
| 1.3.6.1.4.1.2272.1.85.6.4.1.2 | ColumnrcKhiForwardingF2XHealthLeftLnErrMask | read-only | current | Left Lane F2X Health Bit Mask. Each bit in the mask represents a specific F2X event. The following are the events - Bit 0 - Police Drops. Indicates a Status of… |
| 1.3.6.1.4.1.2272.1.85.6.4.1.3 | ColumnrcKhiForwardingF2XHealthMidLnErrMask | read-only | current | Middle Lane F2X Health Bit Mask. Each bit in the mask represents a specific F2X event. The following are the events - Bit 0 - Police Drops. Indicates a Status … |
| 1.3.6.1.4.1.2272.1.85.6.4.1.4 | ColumnrcKhiForwardingF2XHealthRightLnErrMask | read-only | current | Right Lane F2X Health Bit Mask. Each bit in the mask represents a specific F2X event. The following are the events - Bit 0 - Police Drops. Indicates a Status o… |
| 1.3.6.1.4.1.2272.1.85.6.4.1.5 | ColumnrcKhiForwardingF2XHealthLeftLnHealthStatus | read-only | current | Indicates the Left Lane F2X Health as Green/Yellow/Red. If multiple events with different health status occurs at the same time, the highest health status of a… |
| 1.3.6.1.4.1.2272.1.85.6.4.1.6 | ColumnrcKhiForwardingF2XHealthMidLnHealthStatus | read-only | current | Indicates the Middle Lane F2X Health as Green/Yellow/Red. If multiple events with different health status occurs at the same time, the highest health status of… |
| 1.3.6.1.4.1.2272.1.85.6.4.1.7 | ColumnrcKhiForwardingF2XHealthRightLnHealthStatus | read-only | current | Indicates the Right Lane F2X Health as Green/Yellow/Red. If multiple events with different health status occurs at the same time, the highest health status of … |
| 1.3.6.1.4.1.2272.1.85.6.5 | TablercKhiForwardingHistoryTable | not-accessible | current | Forwarding Key Health Indicator MIB - Historical Data. |
| 1.3.6.1.4.1.2272.1.85.6.5.1 | RowrcKhiForwardingHistoryEntry | not-accessible | current | Forwarding KHI - History table entry. |
| 1.3.6.1.4.1.2272.1.85.6.5.1.1 | ColumnrcKhiForwardingHistoryIndex | not-accessible | current | Index for Forwarding Health historical data. |
| 1.3.6.1.4.1.2272.1.85.6.5.1.2 | ColumnrcKhiForwardingHistoryTimeStamp | read-only | current | Timestamp indicating when a particular event occurred. |
| 1.3.6.1.4.1.2272.1.85.6.5.1.3 | ColumnrcKhiForwardingHistorySlotNumber | read-only | current | Slot Number. |
| 1.3.6.1.4.1.2272.1.85.6.5.1.4 | ColumnrcKhiForwardingHistoryLane | read-only | current | Lane where the event occurred. |
| 1.3.6.1.4.1.2272.1.85.6.5.1.5 | ColumnrcKhiForwardingHistoryEvent | read-only | current | Name of the event |
| 1.3.6.1.4.1.2272.1.85.6.6 | TablercKhiForwardingCurrentStatusTable | not-accessible | current | Forwarding Key Health Indicator MIB - Current Status Info. |
| 1.3.6.1.4.1.2272.1.85.6.6.1 | RowrcKhiForwardingCurrentStatusEntry | not-accessible | current | Forwarding KHI - Current Status table entry. |
| 1.3.6.1.4.1.2272.1.85.6.6.1.1 | ColumnrcKhiForwardingCurrentStatusSlotNumber | not-accessible | current | Slot Number. |
| 1.3.6.1.4.1.2272.1.85.6.6.1.2 | ColumnrcKhiForwardingCurrentStatusLeftLnHealth | read-only | current | Indicates the Left Lane Current Health as Green/Yellow/Red. If multiple events with different health status occurs at the same time, the highest health status … |
| 1.3.6.1.4.1.2272.1.85.6.6.1.3 | ColumnrcKhiForwardingCurrentStatusLeftLnErrMask | read-only | current | Left Lane Current Status Health Bit Mask. Each bit in the mask represents what kind of errors the lane is currently experiencing. The following are the events … |
| 1.3.6.1.4.1.2272.1.85.6.6.1.4 | ColumnrcKhiForwardingCurrentStatusMidLnHealth | read-only | current | Indicates the Middle Lane Current Health as Green/Yellow/Red. If multiple events with different health status occurs at the same time, the highest health statu… |
| 1.3.6.1.4.1.2272.1.85.6.6.1.5 | ColumnrcKhiForwardingCurrentStatusMidLnErrMask | read-only | current | Middle Lane Current Status Health Bit Mask. Each bit in the mask represents what kind of errors the lane is currently experiencing. The following are the event… |
| 1.3.6.1.4.1.2272.1.85.6.6.1.6 | ColumnrcKhiForwardingCurrentStatusRightLnHealth | read-only | current | Indicates the Right Lane Current Health as Green/Yellow/Red. If multiple events with different health status occurs at the same time, the highest health status… |
| 1.3.6.1.4.1.2272.1.85.6.6.1.7 | ColumnrcKhiForwardingCurrentStatusRightLnErrMask | read-only | current | Right Lane Current Status Health Bit Mask. Each bit in the mask represents what kind of errors the lane is currently experiencing. The following are the events… |
| 1.3.6.1.4.1.2272.1.85.6.7 | TablercKhiForwardingMonitoringCountersTable | not-accessible | current | Forwarding Monitoring Counters MIB. |
| 1.3.6.1.4.1.2272.1.85.6.7.1 | RowrcKhiForwardingMonitoringCountersEntry | not-accessible | current | Forwarding KHI - Monitoring Counters table entry. |
| 1.3.6.1.4.1.2272.1.85.6.7.1.1 | ColumnrcKhiForwardingMonitoringCountersSlotNumber | not-accessible | current | Slot Number. |
| 1.3.6.1.4.1.2272.1.85.6.7.1.2 | ColumnrcKhiForwardingMonitoringCountersLeftLnPassPacketsCnt | read-only | current | Total number of Left Lane Pass Packets Count |
| 1.3.6.1.4.1.2272.1.85.6.7.1.3 | ColumnrcKhiForwardingMonitoringCountersMidLnPassPacketsCnt | read-only | current | Total number of Middle Lane Pass Packets Count |
| 1.3.6.1.4.1.2272.1.85.6.7.1.4 | ColumnrcKhiForwardingMonitoringCountersRightLnPassPacketsCnt | read-only | current | Total number of Right Lane Pass Packets Count |
| 1.3.6.1.4.1.2272.1.85.6.7.1.5 | ColumnrcKhiForwardingMonitoringCountersLeftLnFabricDropsCnt | read-only | current | Total number of Left Lane Fabric Drops Count |
| 1.3.6.1.4.1.2272.1.85.6.7.1.6 | ColumnrcKhiForwardingMonitoringCountersMidLnFabricDropsCnt | read-only | current | Total number of Middle Lane Fabric Drops Count |
| 1.3.6.1.4.1.2272.1.85.6.7.1.7 | ColumnrcKhiForwardingMonitoringCountersRightLnFabricDropsCnt | read-only | current | Total number of Right Lane Fabric Drops Count |
| 1.3.6.1.4.1.2272.1.85.6.7.1.8 | ColumnrcKhiForwardingMonitoringCountersLeftLnPoliceDropsCnt | read-only | current | Total number of Left Lane Police Drops Count |
| 1.3.6.1.4.1.2272.1.85.6.7.1.9 | ColumnrcKhiForwardingMonitoringCountersMidLnPoliceDropsCnt | read-only | current | Total number of Middle Lane Police Drops Count |
| 1.3.6.1.4.1.2272.1.85.6.7.1.10 | ColumnrcKhiForwardingMonitoringCountersRightLnPoliceDropsCnt | read-only | current | Total number of Right Lane Police Drops Count |
| 1.3.6.1.4.1.2272.1.85.6.7.1.11 | ColumnrcKhiForwardingMonitoringCountersLeftLnFoqDropsCnt | read-only | current | Total number of Left Lane Foq Drops Count |
| 1.3.6.1.4.1.2272.1.85.6.7.1.12 | ColumnrcKhiForwardingMonitoringCountersMidLnFoqDropsCnt | read-only | current | Total number of Middle Lane Foq Drops Count |
| 1.3.6.1.4.1.2272.1.85.6.7.1.13 | ColumnrcKhiForwardingMonitoringCountersRightLnFoqDropsCnt | read-only | current | Total number of Right Lane Foq Drops Count |
| 1.3.6.1.4.1.2272.1.85.6.7.1.14 | ColumnrcKhiForwardingMonitoringCountersLeftLnLegacyDropsCnt | read-only | current | Total number of Left Lane Legacy Drops Count |
| 1.3.6.1.4.1.2272.1.85.6.7.1.15 | ColumnrcKhiForwardingMonitoringCountersMidLnLegacyDropsCnt | read-only | current | Total number of Middle Lane Legacy Drops Count |
| 1.3.6.1.4.1.2272.1.85.6.7.1.16 | ColumnrcKhiForwardingMonitoringCountersRightLnLegacyDropsCnt | read-only | current | Total number of Right Lane Legacy Drops Count |
| 1.3.6.1.4.1.2272.1.85.7 | NodercKhiProtocol | |||
| 1.3.6.1.4.1.2272.1.85.7.1 | TablercKhiOspfTable | not-accessible | current | Ospf protcol KHI summary |
| 1.3.6.1.4.1.2272.1.85.7.1.1 | RowrcKhiOspfEntry | not-accessible | current | Ospf protcol KHI summary entry |
| 1.3.6.1.4.1.2272.1.85.7.1.1.1 | ColumnrcKhiOspfVrfId | not-accessible | current | An unique index used to identify a particular fan in the system. |
| 1.3.6.1.4.1.2272.1.85.7.1.1.2 | ColumnrcKhiOspfRouteTableSize | read-only | current | |
| 1.3.6.1.4.1.2272.1.85.7.1.1.3 | ColumnrcKhiOspfRefRouteTableSize | read-only | current | |
| 1.3.6.1.4.1.2272.1.85.7.1.1.4 | ColumnrcKhiOspfLsdbTableSize | read-only | current | |
| 1.3.6.1.4.1.2272.1.85.7.1.1.5 | ColumnrcKhiOspfNumOfInterfaces | read-only | current | |
| 1.3.6.1.4.1.2272.1.85.7.1.1.6 | ColumnrcKhiOspfNumOfAdjacency | read-only | current | |
| 1.3.6.1.4.1.2272.1.85.7.1.1.7 | ColumnrcKhiOspfRefNumOfAdjacency | read-only | current | |
| 1.3.6.1.4.1.2272.1.85.7.1.1.8 | ColumnrcKhiOspfLastClearTimestamp | read-only | current | |
| 1.3.6.1.4.1.2272.1.85.7.1.1.9 | ColumnrcKhiOspfFirstEventTimestamp | read-only | current | |
| 1.3.6.1.4.1.2272.1.85.7.2 | TablercKhiOspfHistoryTable | not-accessible | current | Ospf protcol KHI summary |
| 1.3.6.1.4.1.2272.1.85.7.2.1 | RowrcKhiOspfHistoryEntry | not-accessible | current | Ospf protcol KHI summary entry |
| 1.3.6.1.4.1.2272.1.85.7.2.1.1 | ColumnrcKhiOspfHistoryVrfId | not-accessible | current | An unique index used to identify a particular fan in the system. |
| 1.3.6.1.4.1.2272.1.85.7.2.1.2 | ColumnrcKhiOspfHistoryIndex | not-accessible | current | History index for a particular VRF OSPF |
| 1.3.6.1.4.1.2272.1.85.7.2.1.3 | ColumnrcKhiOspfHistoryLsdbTableSize | read-only | current | |
| 1.3.6.1.4.1.2272.1.85.7.2.1.4 | ColumnrcKhiOspfHistoryNumOfAdjacency | read-only | current | |
| 1.3.6.1.4.1.2272.1.85.7.2.1.5 | ColumnrcKhiOspfHistoryTimestamp | read-only | current | |
| 1.3.6.1.4.1.2272.1.85.7.3 | TablercKhiBgpTable | not-accessible | current | Bgp protcol KHI summary |
| 1.3.6.1.4.1.2272.1.85.7.3.1 | RowrcKhiBgpEntry | not-accessible | current | Bgp protcol KHI summary entry |
| 1.3.6.1.4.1.2272.1.85.7.3.1.1 | ColumnrcKhiBgpVrfId | not-accessible | current | An unique index used to identify a particular fan in the system. |
| 1.3.6.1.4.1.2272.1.85.7.3.1.2 | ColumnrcKhiBgpUpdateSent | read-only | current | |
| 1.3.6.1.4.1.2272.1.85.7.3.1.3 | ColumnrcKhiBgpUpdateRecvd | read-only | current | Update received |
| 1.3.6.1.4.1.2272.1.85.7.3.1.4 | ColumnrcKhiBgpNotifySent | read-only | current | Notify sent |
| 1.3.6.1.4.1.2272.1.85.7.3.1.5 | ColumnrcKhiBgpNotifyRecvd | read-only | current | BGP Notify received |
| 1.3.6.1.4.1.2272.1.85.7.3.1.6 | ColumnrcKhiBgpBadEvents | read-only | current | BGP bad event count |
| 1.3.6.1.4.1.2272.1.85.7.3.1.7 | ColumnrcKhiBgpRouteTableSize | read-only | current | BGP route table size |
| 1.3.6.1.4.1.2272.1.85.7.3.1.8 | ColumnrcKhiBgpRefRouteTableSize | read-only | current | BGP reference route table size |
| 1.3.6.1.4.1.2272.1.85.7.3.1.9 | ColumnrcKhiBgpEstablishedNbrs | read-only | current | BGP established neighbor |
| 1.3.6.1.4.1.2272.1.85.7.3.1.10 | ColumnrcKhiBgpRefEstablishedNbrs | read-only | current | BGP established neighbor |
| 1.3.6.1.4.1.2272.1.85.7.3.1.11 | ColumnrcKhiBgpNumOfAggregates | read-only | current | Number of aggregates |
| 1.3.6.1.4.1.2272.1.85.7.3.1.12 | ColumnrcKhiBgpNumOfImportedRoutes | read-only | current | Number of imported routes |
| 1.3.6.1.4.1.2272.1.85.7.3.1.13 | ColumnrcKhiBgpLastClearTimestamp | read-only | current | |
| 1.3.6.1.4.1.2272.1.85.7.3.1.14 | ColumnrcKhiBgpFirstEventTimestamp | read-only | current | |
| 1.3.6.1.4.1.2272.1.85.7.4 | TablercKhiBgpHistoryTable | not-accessible | current | Bgp protcol KHI summary |
| 1.3.6.1.4.1.2272.1.85.7.4.1 | RowrcKhiBgpHistoryEntry | not-accessible | current | Bgp protcol KHI summary entry |
| 1.3.6.1.4.1.2272.1.85.7.4.1.1 | ColumnrcKhiBgpHistoryVrfId | not-accessible | current | An unique index used to identify a particular fan in the system. |
| 1.3.6.1.4.1.2272.1.85.7.4.1.2 | ColumnrcKhiBgpHistoryIndex | not-accessible | current | History index for a particular VRF OSPF |
| 1.3.6.1.4.1.2272.1.85.7.4.1.3 | ColumnrcKhiBgpHistoryRibCount | read-only | current | Number of BGP Rib |
| 1.3.6.1.4.1.2272.1.85.7.4.1.4 | ColumnrcKhiBgpHistoryNumOfPeers | read-only | current | Number of BGP peers |
| 1.3.6.1.4.1.2272.1.85.7.4.1.5 | ColumnrcKhiBgpHistoryTimestamp | read-only | current | BGP history timestamp |
| 1.3.6.1.4.1.2272.1.85.7.5 | TablercKhiPimTable | not-accessible | current | Pim protcol KHI summary |
| 1.3.6.1.4.1.2272.1.85.7.5.1 | RowrcKhiPimEntry | not-accessible | current | Pim protcol KHI summary entry |
| 1.3.6.1.4.1.2272.1.85.7.5.1.1 | ColumnrcKhiPimVrfId | not-accessible | current | An unique index used to identify a particular fan in the system. |
| 1.3.6.1.4.1.2272.1.85.7.5.1.2 | ColumnrcKhiPimRoutes | read-only | current | |
| 1.3.6.1.4.1.2272.1.85.7.5.1.3 | ColumnrcKhiPimRefRoutes | read-only | current | |
| 1.3.6.1.4.1.2272.1.85.7.5.1.4 | ColumnrcKhiPimAdjacencies | read-only | current | |
| 1.3.6.1.4.1.2272.1.85.7.5.1.5 | ColumnrcKhiPimRefAdjacencies | read-only | current | |
| 1.3.6.1.4.1.2272.1.85.7.5.1.6 | ColumnrcKhiPimLastClearTimestamp | read-only | current | |
| 1.3.6.1.4.1.2272.1.85.7.5.1.7 | ColumnrcKhiPimFirstEventTimestamp | read-only | current | |
| 1.3.6.1.4.1.2272.1.85.7.6 | TablercKhiPimHistoryTable | not-accessible | current | Pim protcol KHI summary |
| 1.3.6.1.4.1.2272.1.85.7.6.1 | RowrcKhiPimHistoryEntry | not-accessible | current | Pim protcol KHI summary entry |
| 1.3.6.1.4.1.2272.1.85.7.6.1.1 | ColumnrcKhiPimHistoryVrfId | not-accessible | current | An unique index used to identify a particular fan in the system. |
| 1.3.6.1.4.1.2272.1.85.7.6.1.2 | ColumnrcKhiPimHistoryIndex | not-accessible | current | History index for a particular VRF PIM |
| 1.3.6.1.4.1.2272.1.85.7.6.1.3 | ColumnrcKhiPimHistoryRouteCount | read-only | current | |
| 1.3.6.1.4.1.2272.1.85.7.6.1.4 | ColumnrcKhiPimHistoryAdjacencies | read-only | current | |
| 1.3.6.1.4.1.2272.1.85.7.6.1.5 | ColumnrcKhiPimHistoryTimestamp | read-only | current | |
| 1.3.6.1.4.1.2272.1.85.7.7 | TablercKhiIgmpHistoryTable | not-accessible | current | Igmp protcol KHI summary |
| 1.3.6.1.4.1.2272.1.85.7.7.1 | RowrcKhiIgmpHistoryEntry | not-accessible | current | Igmp protcol KHI summary entry |
| 1.3.6.1.4.1.2272.1.85.7.7.1.1 | ColumnrcKhiIgmpHistoryVrfId | not-accessible | current | An unique index used to identify a particular fan in the system. |
| 1.3.6.1.4.1.2272.1.85.7.7.1.2 | ColumnrcKhiIgmpHistoryIndex | not-accessible | current | History index for a particular VRF PIM |
| 1.3.6.1.4.1.2272.1.85.7.7.1.3 | ColumnrcKhiIgmpHistoryGroupCount | read-only | current | |
| 1.3.6.1.4.1.2272.1.85.7.7.1.4 | ColumnrcKhiIgmpHistorySenderCount | read-only | current | |
| 1.3.6.1.4.1.2272.1.85.7.7.1.5 | ColumnrcKhiIgmpHistoryTimestamp | read-only | current | |
| 1.3.6.1.4.1.2272.1.85.7.8 | TablercKhiIgmpSnoopHistoryTable | not-accessible | current | IgmpSnoop protcol KHI summary |
| 1.3.6.1.4.1.2272.1.85.7.8.1 | RowrcKhiIgmpSnoopHistoryEntry | not-accessible | current | IgmpSnoop protcol KHI summary entry |
| 1.3.6.1.4.1.2272.1.85.7.8.1.1 | ColumnrcKhiIgmpSnoopHistoryVrfId | not-accessible | current | An unique index used to identify a particular fan in the system. |
| 1.3.6.1.4.1.2272.1.85.7.8.1.2 | ColumnrcKhiIgmpSnoopHistoryIndex | not-accessible | current | History index for a particular VRF PIM |
| 1.3.6.1.4.1.2272.1.85.7.8.1.3 | ColumnrcKhiIgmpSnoopHistoryStreamCount | read-only | current | IGMP Snoop stream count |
| 1.3.6.1.4.1.2272.1.85.7.8.1.4 | ColumnrcKhiIgmpSnoopHistoryHostCount | read-only | current | IgmpSnoop hots count |
| 1.3.6.1.4.1.2272.1.85.7.8.1.5 | ColumnrcKhiIgmpSnoopHistoryTimestamp | read-only | current | Igmp Snoop timestamp |
| 1.3.6.1.4.1.2272.1.85.7.9 | ScalarrcKhiVlacpTotalPortCount | read-only | current | VLACP port count, where VLACP is enabled |
| 1.3.6.1.4.1.2272.1.85.7.10 | ScalarrcKhiVlacpPortUpCount | read-only | current | Number of ports where VLACP is up |
| 1.3.6.1.4.1.2272.1.85.7.11 | ScalarrcKhiIstState | read-only | current | Current IST State for KHI |
| 1.3.6.1.4.1.2272.1.85.7.12 | ScalarrcKhiFirstIstSyncTimeStamp | read-only | current | Timestamp for the first IST Sync |
| 1.3.6.1.4.1.2272.1.85.7.13 | ScalarrcKhiLastIstSyncTimeStamp | read-only | current | Timestamp for the last IST Sync |
| 1.3.6.1.4.1.2272.1.85.7.14 | ScalarrcKhiNumIstUpEvents | read-only | current | Total number of IST up events |
| 1.3.6.1.4.1.2272.1.85.7.15 | ScalarrcKhiNumIstDownEvents | read-only | current | Total number of IST down events |
| 1.3.6.1.4.1.2272.1.85.7.16 | ScalarrcKhiNumSmltDownEventsSent | read-only | current | Total number of SMLT down events sent |
| 1.3.6.1.4.1.2272.1.85.7.17 | ScalarrcKhiLastSmltDownEventSentTimeStamp | read-only | current | Timestamp for the last SMLT down event sent |
| 1.3.6.1.4.1.2272.1.85.7.18 | ScalarrcKhiNumSmltDownEventsRecv | read-only | current | Total number of SMLT down events received |
| 1.3.6.1.4.1.2272.1.85.7.19 | ScalarrcKhiLastSmltDownEventRecvTimeStamp | read-only | current | Timestamp for the last SMLT down event received |
| 1.3.6.1.4.1.2272.1.85.7.20 | ScalarrcKhiNumSmltUpEventsSent | read-only | current | Total number of SMLT up events sent |
| 1.3.6.1.4.1.2272.1.85.7.21 | ScalarrcKhiLastSmltUpEventSentTimeStamp | read-only | current | Timestamp for the last SMLT up event sent |
| 1.3.6.1.4.1.2272.1.85.7.22 | ScalarrcKhiNumSmltUpEventsRecv | read-only | current | Total number of SMLT Up events received |
| 1.3.6.1.4.1.2272.1.85.7.23 | ScalarrcKhiLastSmltUpEventRecvTimeStamp | read-only | current | Timestamp for the last SMLT up event received |
| 1.3.6.1.4.1.2272.1.85.7.24 | ScalarrcKhiNumSendMacAddrSent | read-only | current | Total number of SMLT send mac addr events sent |
| 1.3.6.1.4.1.2272.1.85.7.25 | ScalarrcKhiLastSendMacAddrSentTimeStamp | read-only | current | Timestamp for the last SMLT send MAC addr event sent |
| 1.3.6.1.4.1.2272.1.85.7.26 | ScalarrcKhiNumSendMacAddrRecv | read-only | current | Total number of SMLT send mac addr events recv |
| 1.3.6.1.4.1.2272.1.85.7.27 | ScalarrcKhiLastSendMacAddrRecvTimeStamp | read-only | current | Timestamp for the last SMLT send MAC addr event received |
| 1.3.6.1.4.1.2272.1.85.7.28 | TablercKhiIstHistoryTable | not-accessible | current | Ist protcol KHI history |
| 1.3.6.1.4.1.2272.1.85.7.28.1 | RowrcKhiIstHistoryEntry | not-accessible | current | Ist protcol KHI history entry |
| 1.3.6.1.4.1.2272.1.85.7.28.1.1 | ColumnrcKhiIstHistoryIndex | not-accessible | current | History index for a particular IST history entry |
| 1.3.6.1.4.1.2272.1.85.7.28.1.2 | ColumnrcKhiIstHistoryIstStatus | read-only | current | Status of the IST |
| 1.3.6.1.4.1.2272.1.85.7.28.1.3 | ColumnrcKhiIstHistoryTimestamp | read-only | current | Timestamp associated with IST history entry |
| 1.3.6.1.4.1.2272.1.85.7.29 | TablercKhiSmltHistoryTable | not-accessible | current | Smlt protocol KHI history |
| 1.3.6.1.4.1.2272.1.85.7.29.1 | RowrcKhiSmltHistoryEntry | not-accessible | current | Smlt protcol KHI history entry |
| 1.3.6.1.4.1.2272.1.85.7.29.1.1 | ColumnrcKhiSmltHistoryIndex | not-accessible | current | History index for a particular SMLT history entry |
| 1.3.6.1.4.1.2272.1.85.7.29.1.2 | ColumnrcKhiSmltHistorySmltId | read-only | current | SMLTID of the SMLT history entry |
| 1.3.6.1.4.1.2272.1.85.7.29.1.3 | ColumnrcKhiSmltHistorySmltStatus | read-only | current | Status of the SMLT |
| 1.3.6.1.4.1.2272.1.85.7.29.1.4 | ColumnrcKhiSmltHistoryTimestamp | read-only | current | Timestamp associated with IST history entry |
| 1.3.6.1.4.1.2272.1.85.7.30 | TablercKhiSmltTable | not-accessible | current | Smlt protocol KHI |
| 1.3.6.1.4.1.2272.1.85.7.30.1 | RowrcKhiSmltEntry | not-accessible | current | Smlt protcol KHI entry |
| 1.3.6.1.4.1.2272.1.85.7.30.1.1 | ColumnrcKhiSmltId | not-accessible | current | SMLTID of the SMLT entry, also used as index |
| 1.3.6.1.4.1.2272.1.85.7.30.1.2 | ColumnrcKhiSmltStatus | read-only | current | Status of the SMLT |
| 1.3.6.1.4.1.2272.1.85.7.30.1.3 | ColumnrcKhiSmltUpEvents | read-only | current | Number of SMLT Up Events |
| 1.3.6.1.4.1.2272.1.85.7.30.1.4 | ColumnrcKhiSmltDownEvents | read-only | current | Number of SMLT Down Events |
| 1.3.6.1.4.1.2272.1.85.8 | NodercKhiMgmt | |||
| 1.3.6.1.4.1.2272.1.85.8.1 | ScalarrcKhiMgmtCurrentLogStatus | read-only | current | The current status of logging task |
| 1.3.6.1.4.1.2272.1.85.8.2 | ScalarrcKhiMgmtLogFirstHighestEvent | read-only | current | The first change status of the log since last boot or clear. 'green (1)' means log OK. 'red (4)' means log fail |
| 1.3.6.1.4.1.2272.1.85.8.3 | ScalarrcKhiMgmtLogFirstHighestEventTime | read-only | current | Record the first log task change time The display format in mmddyyhhmmss. If all are zero, it means no change |
| 1.3.6.1.4.1.2272.1.85.8.4 | ScalarrcKhiMgmtLogRefStatus | read-only | current | Reference status before change since last boot or clear. 'green (1)' means log OK. 'red (4)' means log fail |
| 1.3.6.1.4.1.2272.1.85.8.5 | ScalarrcKhiMgmtLogStatusLastClearTime | read-only | current | Record the first log task change time The display format in mmddyyhhmmss. If all are zero, it means no change |
| 1.3.6.1.4.1.2272.1.85.8.6 | TablercKhiMgmtLogHistoryTable | not-accessible | current | Log history KHI summary |
| 1.3.6.1.4.1.2272.1.85.8.6.1 | RowrcKhiMgmtLogHistoryEntry | not-accessible | current | Log sttaus KHI summary entry |
| 1.3.6.1.4.1.2272.1.85.8.6.1.1 | ColumnrcKhiMgmtLogHistoryIndex | not-accessible | current | An unique history index used to identify a particular entry in log history. |
| 1.3.6.1.4.1.2272.1.85.8.6.1.2 | ColumnrcKhiMgmtLogHistoryStatus | read-only | current | Changing Status |
| 1.3.6.1.4.1.2272.1.85.8.6.1.3 | ColumnrcKhiMgmtLogHistoryTimestamp | read-only | current | Status change timestamp. |
| 1.3.6.1.4.1.2272.1.85.9 | NodercKhiIpInterface | |||
| 1.3.6.1.4.1.2272.1.85.9.1 | TablercKhiIpInterfaceHistoryTable | not-accessible | current | Ip Interface Historical Data |
| 1.3.6.1.4.1.2272.1.85.9.1.1 | RowrcKhiIpInterfaceHistoryEntry | not-accessible | current | Ip Interface history table entry. |
| 1.3.6.1.4.1.2272.1.85.9.1.1.1 | ColumnrcKhiIpInterfaceHistoryIndex | not-accessible | current | Historical data index number. |
| 1.3.6.1.4.1.2272.1.85.9.1.1.2 | ColumnrcKhiIpInterfaceHistoryTimestamp | read-only | current | Timestamp indicating when the event occurred. |
| 1.3.6.1.4.1.2272.1.85.9.1.1.3 | ColumnrcKhiIpInterfaceHistoryIpAddr | read-only | current | IP address of the interface. |
| 1.3.6.1.4.1.2272.1.85.9.1.1.4 | ColumnrcKhiIpInterfaceHistoryVlanId | read-only | current | Vlan id of the IP interface. |
| 1.3.6.1.4.1.2272.1.85.9.1.1.5 | ColumnrcKhiIpInterfaceHistoryEvent | read-only | current | Indicates whether the interface went up or down. |
| 1.3.6.1.4.1.2272.1.85.10 | NodercKhiSlot | |||
| 1.3.6.1.4.1.2272.1.85.10.1 | TablercKhiSlotPerfTable | not-accessible | current | Slot Performance Information |
| 1.3.6.1.4.1.2272.1.85.10.1.1 | RowrcKhiSlotPerfEntry | not-accessible | current | Slot Performance Entry |
| 1.3.6.1.4.1.2272.1.85.10.1.1.1 | ColumnrcKhiSlotIndex | not-accessible | current | An unique index used to identify the slot |
| 1.3.6.1.4.1.2272.1.85.10.1.1.2 | ColumnrcKhiSlotCpuCurrentUtil | read-only | current | Percentage CPU utilization under current operating conditions. |
| 1.3.6.1.4.1.2272.1.85.10.1.1.3 | ColumnrcKhiSlotCpu5MinAve | read-only | current | Average percentage CPU utilization over the past 5 minutes. |
| 1.3.6.1.4.1.2272.1.85.10.1.1.4 | ColumnrcKhiSlotCpu5MinHi | read-only | current | Hi watermark for percentage CPU utilization over the past 5 minutes. |
| 1.3.6.1.4.1.2272.1.85.10.1.1.5 | ColumnrcKhiSlotCpu5MinHiTime | read-only | current | Last time of at which rcKhiSlotCpu5MinHi sampling occured. |
| 1.3.6.1.4.1.2272.1.85.10.1.1.6 | ColumnrcKhiSlotMemUsed | read-only | current | The amount of DRAM memory consumed in KB. |
| 1.3.6.1.4.1.2272.1.85.10.1.1.7 | ColumnrcKhiSlotMemFree | read-only | current | The amount of DRAM memory available in KB. |
| 1.3.6.1.4.1.2272.1.85.10.1.1.8 | ColumnrcKhiSlotMemUtil | read-only | current | Current percentage of memory utilization. |
| 1.3.6.1.4.1.2272.1.85.10.1.1.9 | ColumnrcKhiSlotMem5MinAve | read-only | current | Average percentage of memory utilization over the past 5 minutes. |
| 1.3.6.1.4.1.2272.1.85.10.1.1.10 | ColumnrcKhiSlotMem5MinHi | read-only | current | High watermark for percentage memory utilization over the past 5 minutes. |
| 1.3.6.1.4.1.2272.1.85.10.1.1.11 | ColumnrcKhiSlotMem5MinHiTime | read-only | current | The last time memory information was registered. |
| 1.3.6.1.4.1.2272.1.85.10.1.1.12 | ColumnrcKhiSlotUsedFbuf | read-only | current | The number of Fbufs in use. |
| 1.3.6.1.4.1.2272.1.85.10.1.1.13 | ColumnrcKhiSlotFreeFbuf | read-only | current | The number of Fbufs available. |
| 1.3.6.1.4.1.2272.1.85.10.1.1.14 | ColumnrcKhiSlotNoFbuf | read-only | current | The number of times when running out of Fbuff |
| 1.3.6.1.4.1.2272.1.85.10.1.1.15 | ColumnrcKhiSlotNetStackSysFreeMbuf | read-only | current | The number of network stack system Mbufs available. |
| 1.3.6.1.4.1.2272.1.85.10.1.1.16 | ColumnrcKhiSlotNetStackDataFreeMbuf | read-only | current | The number of network stack data Mbufs available. |
| 1.3.6.1.4.1.2272.1.85.10.1.1.17 | ColumnrcKhiSlotNetStackSysUsedMbuf | read-only | current | The number of network stack system Mbufs in use. |
| 1.3.6.1.4.1.2272.1.85.10.1.1.18 | ColumnrcKhiSlotNetStackDataUsedMbuf | read-only | current | The number of network stack data Mbufs in use. |
| 1.3.6.1.4.1.2272.1.85.10.1.1.19 | ColumnrcKhiSlotNetStackSysSocketMbuf | read-only | current | The number of network stack system sockets. |
| 1.3.6.1.4.1.2272.1.85.10.1.1.20 | ColumnrcKhiSlotQHigh | read-only | current | The highest number of queue entries consumed for system messaging. |
| 1.3.6.1.4.1.2272.1.85.10.1.1.21 | ColumnrcKhiSlotQNormal | read-only | current | The current number of queue entries consumed for system messaging. |
| 1.3.6.1.4.1.2272.1.85.10.1.1.22 | ColumnrcKhiSlotFreeQEntries | read-only | current | The current available number of queue entries for system messaging. |
| 1.3.6.1.4.1.2272.1.85.10.1.1.23 | ColumnrcKhiSlotCpu1MinAve | read-only | current | Average percentage CPU utilization over the past 1 minute. |
| 1.3.6.1.4.1.2272.1.85.10.1.1.24 | ColumnrcKhiSlotCpu1MinHi | read-only | current | Hi watermark for percentage CPU utilization over the past 1 minute. |
| 1.3.6.1.4.1.2272.1.85.10.1.1.25 | ColumnrcKhiSlotCpu1MinHiTime | read-only | current | Last time at which rcKhiSlotCpu1MinHi sampling occured. |
| 1.3.6.1.4.1.2272.1.85.10.2 | TablercKhiSlotProcessTable | not-accessible | current | CP Process Information |
| 1.3.6.1.4.1.2272.1.85.10.2.1 | RowrcKhiSlotProcessEntry | not-accessible | current | Slot Process Entry |
| 1.3.6.1.4.1.2272.1.85.10.2.1.1 | ColumnrcKhiSlotProcessId | not-accessible | current | Process ID |
| 1.3.6.1.4.1.2272.1.85.10.2.1.2 | ColumnrcKhiSlotProcessParentId | read-only | current | Parent Process ID |
| 1.3.6.1.4.1.2272.1.85.10.2.1.3 | ColumnrcKhiSlotProcessName | read-only | current | Name of the process running |
| 1.3.6.1.4.1.2272.1.85.10.2.1.4 | ColumnrcKhiSlotProcessVmSize | read-only | current | The size of the virtual memory allocated to the process |
| 1.3.6.1.4.1.2272.1.85.10.2.1.5 | ColumnrcKhiSlotProcessVmLck | read-only | current | The amount of locked memory |
| 1.3.6.1.4.1.2272.1.85.10.2.1.6 | ColumnrcKhiSlotProcessVmRss | read-only | current | The amount of memory mapped in RAM ( instead of swapped out) |
| 1.3.6.1.4.1.2272.1.85.10.2.1.7 | ColumnrcKhiSlotProcessVmData | read-only | current | The size of the Data segment |
| 1.3.6.1.4.1.2272.1.85.10.2.1.8 | ColumnrcKhiSlotProcessVmStk | read-only | current | The stack size |
| 1.3.6.1.4.1.2272.1.85.10.2.1.9 | ColumnrcKhiSlotProcessVmExe | read-only | current | The size of the executable segment |
| 1.3.6.1.4.1.2272.1.85.10.2.1.10 | ColumnrcKhiSlotProcessVmLib | read-only | current | The size of the library code |
| 1.3.6.1.4.1.2272.1.85.10.3 | TablercKhiSlotPThreadTable | not-accessible | current | Slot pthread information |
| 1.3.6.1.4.1.2272.1.85.10.3.1 | RowrcKhiSlotPThreadEntry | not-accessible | current | Slot pthread entry |
| 1.3.6.1.4.1.2272.1.85.10.3.1.1 | ColumnrcKhiSlotPThreadTaskId | not-accessible | current | Task ID |
| 1.3.6.1.4.1.2272.1.85.10.3.1.2 | ColumnrcKhiSlotPThreadName | read-only | current | Name of the process running |
| 1.3.6.1.4.1.2272.1.85.10.3.1.3 | ColumnrcKhiSlotPThreadCpuCurrentUtil | read-only | current | Percentage CPU utilization under current operating conditions. Value is in tenth's of a percent. |
| 1.3.6.1.4.1.2272.1.85.10.3.1.4 | ColumnrcKhiSlotPThreadCpu5MinAve | read-only | current | Average percentage CPU utilization over the past 5 minutes. Value is in tenth's of a percent. |
| 1.3.6.1.4.1.2272.1.85.10.3.1.5 | ColumnrcKhiSlotPThreadCpu5MinHi | read-only | current | Hi watermark for percentage CPU utilization over the past 5 minutes. Value is in tenth's of a percent. |
| 1.3.6.1.4.1.2272.1.85.10.3.1.6 | ColumnrcKhiSlotPthread5MinHiTime | read-only | current | Last time at which sampling occured. |
| 1.3.6.1.4.1.2272.1.85.11 | NodercKhiForwardingCb | |||
| 1.3.6.1.4.1.2272.1.85.11.1 | TablercKhiForwardingCbIfTable | not-accessible | current | Forwarding Interface Key Health Indicator MIB - All Cobalt Blue Data. |
| 1.3.6.1.4.1.2272.1.85.11.1.1 | RowrcKhiForwardingCbIfEntry | not-accessible | current | Forwarding Interface KHI - Cobalt Blue table entry. |
| 1.3.6.1.4.1.2272.1.85.11.1.1.1 | ColumnrcKhiForwardingCbIfIndex | not-accessible | current | Interface index for CB's KHI Forwarding data. Indicies are essentially port based. |
| 1.3.6.1.4.1.2272.1.85.11.1.1.2 | ColumnrcKhiForwardingCbIfRxOk | read-only | current | Receieve OK Packets |
| 1.3.6.1.4.1.2272.1.85.11.1.1.3 | ColumnrcKhiForwardingCbIfTxOk | read-only | current | Transmit OK Packets |
| 1.3.6.1.4.1.2272.1.85.11.1.1.4 | ColumnrcKhiForwardingCbIfRxErr | read-only | current | Receive Error Packets |
| 1.3.6.1.4.1.2272.1.85.11.1.1.5 | ColumnrcKhiForwardingCbIfTxErr | read-only | current | Transmit Error Packets |
| 1.3.6.1.4.1.2272.1.85.11.1.1.6 | ColumnrcKhiForwardingCbIfRdbgc0 | read-only | current | RDBGC0 Packets |
| 1.3.6.1.4.1.2272.1.85.11.1.1.7 | ColumnrcKhiForwardingCbIfRdbgc0Mask | read-only | current | RDBGC0 Mask |
| 1.3.6.1.4.1.2272.1.85.11.1.1.8 | ColumnrcKhiForwardingCbIfTdbgc0 | read-only | current | TDBGC0 Packets |
| 1.3.6.1.4.1.2272.1.85.11.1.1.9 | ColumnrcKhiForwardingCbIfTdbgc0Mask | read-only | current | TDBGC0 Mask |
| 1.3.6.1.4.1.2272.1.85.11.1.1.10 | ColumnrcKhiForwardingCbIfK2IpmcDrops | read-only | current | IP Multicast Drops |
| 1.3.6.1.4.1.2272.1.85.11.2 | TablercKhiForwardingCbMachigigTable | not-accessible | current | Forwarding Mac-Higig Key Health Indicator MIB - All Cobalt Blue Data. |
| 1.3.6.1.4.1.2272.1.85.11.2.1 | RowrcKhiForwardingCbMachigigEntry | not-accessible | current | Forwarding Mac-Higig KHI - Cobalt Blue table entry. |
| 1.3.6.1.4.1.2272.1.85.11.2.1.1 | ColumnrcKhiForwardingCbMachigigIndex | not-accessible | current | Index for CB's Forwarding MAc-Higig Health data. There are 6 indicies reserved on a per slot basis. Depending on the card present and the data being requested … |
| 1.3.6.1.4.1.2272.1.85.11.2.1.2 | ColumnrcKhiForwardingCbMachigigMacK2 | read-only | current | |
| 1.3.6.1.4.1.2272.1.85.11.2.1.3 | ColumnrcKhiForwardingCbMachigigMacK2Mac | read-only | current | |
| 1.3.6.1.4.1.2272.1.85.11.2.1.4 | ColumnrcKhiForwardingCbMachigigRDGBC0 | read-only | current | |
| 1.3.6.1.4.1.2272.1.85.11.2.1.5 | ColumnrcKhiForwardingCbMachigigRDGBC0mask | read-only | current | |
| 1.3.6.1.4.1.2272.1.85.11.2.1.6 | ColumnrcKhiForwardingCbMachigigTDGBC0 | read-only | current | |
| 1.3.6.1.4.1.2272.1.85.11.2.1.7 | ColumnrcKhiForwardingCbMachigigTDGBC0mask | read-only | current | |
| 1.3.6.1.4.1.2272.1.85.11.2.1.8 | ColumnrcKhiForwardingCbMachigigIFPDOSDrops | read-only | current | |
| 1.3.6.1.4.1.2272.1.85.11.3 | TablercKhiForwardingCbK2Table | not-accessible | current | Forwarding K2 Key Health Indicator MIB - All Cobalt Blue Data. |
| 1.3.6.1.4.1.2272.1.85.11.3.1 | RowrcKhiForwardingCbK2Entry | not-accessible | current | Forwarding K2 KHI - Cobalt Blue table entry. |
| 1.3.6.1.4.1.2272.1.85.11.3.1.1 | ColumnrcKhiForwardingCbK2Index | not-accessible | current | Index for CB's Forwarding K2 Health data. There are 6 indicies reserved on a per slot basis. Depending on the card present and the data being requested not all… |
| 1.3.6.1.4.1.2272.1.85.11.3.1.2 | ColumnrcKhiForwardingCbK2MacK2 | read-only | current | |
| 1.3.6.1.4.1.2272.1.85.11.3.1.3 | ColumnrcKhiForwardingCbK2Zagros | read-only | current | |
| 1.3.6.1.4.1.2272.1.85.11.3.1.4 | ColumnrcKhiForwardingCbK2ZagrosK2 | read-only | current | |
| 1.3.6.1.4.1.2272.1.85.11.3.1.5 | ColumnrcKhiForwardingCbK2Mac | read-only | current | |
| 1.3.6.1.4.1.2272.1.85.11.3.1.6 | ColumnrcKhiForwardingCbK2MacK2Err | read-only | current | |
| 1.3.6.1.4.1.2272.1.85.11.3.1.7 | ColumnrcKhiForwardingCbK2ZagrosErr | read-only | current | |
| 1.3.6.1.4.1.2272.1.85.11.3.1.8 | ColumnrcKhiForwardingCbK2ZagrosK2Err | read-only | current | |
| 1.3.6.1.4.1.2272.1.85.11.3.1.9 | ColumnrcKhiForwardingCbK2MacErr | read-only | current | |
| 1.3.6.1.4.1.2272.1.85.11.4 | TablercKhiForwardingCbZagrosTable | not-accessible | current | Zagros Forwarding Zagros Key Health Indicator MIB - All Cobalt Blue Data. |
| 1.3.6.1.4.1.2272.1.85.11.4.1 | RowrcKhiForwardingCbZagrosEntry | not-accessible | current | Zagros Forwarding KHI - Cobalt Blue table entry. |
| 1.3.6.1.4.1.2272.1.85.11.4.1.1 | ColumnrcKhiForwardingCbZagrosIndex | not-accessible | current | Index for CB's Forwarding Zagros Health data. There are 6 indicies reserved on a per slot basis. Depending on the card present and the data being requested not… |
| 1.3.6.1.4.1.2272.1.85.11.4.1.2 | ColumnrcKhiForwardingCbZagrosK2Zagros | read-only | current | |
| 1.3.6.1.4.1.2272.1.85.11.4.1.3 | ColumnrcKhiForwardingCbZagrosRsp | read-only | current | |
| 1.3.6.1.4.1.2272.1.85.11.4.1.4 | ColumnrcKhiForwardingCbZagrosQe | read-only | current | |
| 1.3.6.1.4.1.2272.1.85.11.4.1.5 | ColumnrcKhiForwardingCbZagrosQeZagros | read-only | current | |
| 1.3.6.1.4.1.2272.1.85.11.4.1.6 | ColumnrcKhiForwardingCbZagrosK2 | read-only | current | |
| 1.3.6.1.4.1.2272.1.85.11.4.1.7 | ColumnrcKhiForwardingCbZagrosPmmPoolLo | read-only | current | |
| 1.3.6.1.4.1.2272.1.85.11.4.1.8 | ColumnrcKhiForwardingCbZagrosPmmPoolHigh | read-only | current | |
| 1.3.6.1.4.1.2272.1.85.11.4.1.9 | ColumnrcKhiForwardingCbZagrosPmmRspDropCounters | read-only | current | |
| 1.3.6.1.4.1.2272.1.85.11.4.1.10 | ColumnrcKhiForwardingCbZagrosPmmoutputDropCount | read-only | current | |
| 1.3.6.1.4.1.2272.1.85.11.4.1.11 | ColumnrcKhiForwardingCbZagrosPmmAdmissionRspDropCount | read-only | current | |
| 1.3.6.1.4.1.2272.1.85.11.4.1.12 | ColumnrcKhiForwardingCbZagrosPmmAdmissionErrDropCount | read-only | current | |
| 1.3.6.1.4.1.2272.1.85.11.4.1.13 | ColumnrcKhiForwardingCbZagrosPmmPool1Drop | read-only | current | |
| 1.3.6.1.4.1.2272.1.85.11.4.1.14 | ColumnrcKhiForwardingCbZagrosPmmPool2Drop | read-only | current | |
| 1.3.6.1.4.1.2272.1.85.11.4.1.15 | ColumnrcKhiForwardingCbZagrosPmmPool3Drop | read-only | current | |
| 1.3.6.1.4.1.2272.1.85.11.4.1.16 | ColumnrcKhiForwardingCbZagrosPmmPool4Drop | read-only | current | |
| 1.3.6.1.4.1.2272.1.85.11.4.1.17 | ColumnrcKhiForwardingCbZagrosPmmPool5Drop | read-only | current | |
| 1.3.6.1.4.1.2272.1.85.11.4.1.18 | ColumnrcKhiForwardingCbZagrosPmmPool6Drop | read-only | current | |
| 1.3.6.1.4.1.2272.1.85.11.4.1.19 | ColumnrcKhiForwardingCbZagrosPmmPool7Drop | read-only | current | |
| 1.3.6.1.4.1.2272.1.85.11.4.1.20 | ColumnrcKhiForwardingCbZagrosPmmPool8Drop | read-only | current | |
| 1.3.6.1.4.1.2272.1.85.11.4.1.21 | ColumnrcKhiForwardingCbZagrosPmmPool9Drop | read-only | current | |
| 1.3.6.1.4.1.2272.1.85.11.4.1.22 | ColumnrcKhiForwardingCbZagrosPmmPool10Drop | read-only | current | |
| 1.3.6.1.4.1.2272.1.85.11.4.1.23 | ColumnrcKhiForwardingCbZagrosHbeCommandDrops | read-only | current | |
| 1.3.6.1.4.1.2272.1.85.11.4.1.24 | ColumnrcKhiForwardingCbZagrosTcamSearchError | read-only | current | |
| 1.3.6.1.4.1.2272.1.85.11.4.1.25 | ColumnrcKhiForwardingCbZagrosEhpAllPortDownIstCounter | read-only | current | |
| 1.3.6.1.4.1.2272.1.85.11.4.1.26 | ColumnrcKhiForwardingCbZagrosEhpAllPortDownMltCounter | read-only | current | |
| 1.3.6.1.4.1.2272.1.85.11.4.1.27 | ColumnrcKhiForwardingCbZagrosEhpErrorDropCounter | read-only | current | |
| 1.3.6.1.4.1.2272.1.85.11.4.1.28 | ColumnrcKhiForwardingCbZagrosIgrFilterDropCount | read-only | current | |
| 1.3.6.1.4.1.2272.1.85.11.4.1.29 | ColumnrcKhiForwardingCbZagrosZapTxCtl | read-only | current | |
| 1.3.6.1.4.1.2272.1.85.11.4.1.30 | ColumnrcKhiForwardingCbZagrosZapTxDat | read-only | current | |
| 1.3.6.1.4.1.2272.1.85.11.4.1.31 | ColumnrcKhiForwardingCbZagrosZapRxCtl | read-only | current | |
| 1.3.6.1.4.1.2272.1.85.11.4.1.32 | ColumnrcKhiForwardingCbZagrosZapRxDat | read-only | current | |
| 1.3.6.1.4.1.2272.1.85.11.4.1.33 | ColumnrcKhiForwardingCbZagrosZapTxHbe | read-only | current | |
| 1.3.6.1.4.1.2272.1.85.11.4.1.34 | ColumnrcKhiForwardingCbZagrosTcamSearchVal | read-only | current | |
| 1.3.6.1.4.1.2272.1.85.11.4.1.35 | ColumnrcKhiForwardingCbZagrosEmbDropCount | read-only | current | |
| 1.3.6.1.4.1.2272.1.85.11.4.1.36 | ColumnrcKhiForwardingCbZagrosEhpFilterDropCount | read-only | current | |
| 1.3.6.1.4.1.2272.1.85.11.4.1.37 | ColumnrcKhiForwardingCbZagrosEgrIpmcDropCount | read-only | current | |
| 1.3.6.1.4.1.2272.1.85.11.4.1.38 | ColumnrcKhiForwardingCbZagrosEgressEsb1Count | read-only | current | |
| 1.3.6.1.4.1.2272.1.85.11.4.1.39 | ColumnrcKhiForwardingCbZagrosEgressEsb2Count | read-only | current | |
| 1.3.6.1.4.1.2272.1.85.11.4.1.40 | ColumnrcKhiForwardingCbZagrosEgressEsb3Count | read-only | current | |
| 1.3.6.1.4.1.2272.1.85.11.4.1.41 | ColumnrcKhiForwardingCbZagrosEgressEsb4Count | read-only | current | |
| 1.3.6.1.4.1.2272.1.85.11.4.1.42 | ColumnrcKhiForwardingCbZagrosEgressEsb5Count | read-only | current | |
| 1.3.6.1.4.1.2272.1.85.11.4.1.43 | ColumnrcKhiForwardingCbZagrosEgressEsb6Count | read-only | current | |
| 1.3.6.1.4.1.2272.1.85.11.4.1.44 | ColumnrcKhiForwardingCbZagrosRspRx | read-only | current | |
| 1.3.6.1.4.1.2272.1.85.11.4.1.45 | ColumnrcKhiForwardingCbZagrosOpTx | read-only | current | |
| 1.3.6.1.4.1.2272.1.85.11.4.1.46 | ColumnrcKhiForwardingCbZagrosRspTx | read-only | current | |
| 1.3.6.1.4.1.2272.1.85.11.4.1.47 | ColumnrcKhiForwardingCbZagrosCifRqCount | read-only | current | |
| 1.3.6.1.4.1.2272.1.85.11.4.1.48 | ColumnrcKhiForwardingCbZagrosCifRsCounter | read-only | current | |
| 1.3.6.1.4.1.2272.1.85.11.4.1.49 | ColumnrcKhiForwardingCbZagrosPage1Count | read-only | obsolete | |
| 1.3.6.1.4.1.2272.1.85.11.4.1.50 | ColumnrcKhiForwardingCbZagrosPage2Count | read-only | obsolete | |
| 1.3.6.1.4.1.2272.1.85.11.4.1.51 | ColumnrcKhiForwardingCbZagrosPage3Count | read-only | obsolete | |
| 1.3.6.1.4.1.2272.1.85.11.4.1.52 | ColumnrcKhiForwardingCbZagrosPage4Count | read-only | obsolete | |
| 1.3.6.1.4.1.2272.1.85.11.4.1.53 | ColumnrcKhiForwardingCbZagrosPage5Count | read-only | obsolete | |
| 1.3.6.1.4.1.2272.1.85.11.4.1.54 | ColumnrcKhiForwardingCbZagrosPage6Count | read-only | obsolete | |
| 1.3.6.1.4.1.2272.1.85.11.4.1.55 | ColumnrcKhiForwardingCbZagrosPage7Count | read-only | obsolete | |
| 1.3.6.1.4.1.2272.1.85.11.4.1.56 | ColumnrcKhiForwardingCbZagrosPage8Count | read-only | obsolete | |
| 1.3.6.1.4.1.2272.1.85.11.4.1.57 | ColumnrcKhiForwardingCbZagrosPage9Count | read-only | obsolete | |
| 1.3.6.1.4.1.2272.1.85.11.4.1.58 | ColumnrcKhiForwardingCbZagrosPage10Count | read-only | obsolete | |
| 1.3.6.1.4.1.2272.1.85.11.4.1.59 | ColumnrcKhiForwardingCbZagrosShPp | read-only | obsolete | |
| 1.3.6.1.4.1.2272.1.85.11.4.1.60 | ColumnrcKhiForwardingCbZagrosFpCounts | read-only | obsolete | |
| 1.3.6.1.4.1.2272.1.85.11.4.1.61 | ColumnrcKhiForwardingCbZagrosRspPlcThresholdReg | read-only | current | |
| 1.3.6.1.4.1.2272.1.85.11.4.1.62 | ColumnrcKhiForwardingCbZagrosRePlc | read-only | current | |
| 1.3.6.1.4.1.2272.1.85.11.4.1.63 | ColumnrcKhiForwardingCbZagrosNumPools | read-only | current | |
| 1.3.6.1.4.1.2272.1.85.11.4.1.64 | ColumnrcKhiForwardingCbZagrosFpCntOPA | read-only | current | Free page counter for OPA(Output Packet Assembler) |
| 1.3.6.1.4.1.2272.1.85.11.4.1.65 | ColumnrcKhiForwardingCbZagrosFpCntRPA | read-only | current | Free page counter for RPA(RSP Packet Assembler) |
| 1.3.6.1.4.1.2272.1.85.11.4.1.66 | ColumnrcKhiForwardingCbZagrosFpCntFPM | read-only | current | Free page counter for FPM(Free Page Manager) |
| 1.3.6.1.4.1.2272.1.85.11.4.1.67 | ColumnrcKhiForwardingCbZagrosRspPlcPktCntPeak | read-only | current | RSP PLC Peak Packet Count |
| 1.3.6.1.4.1.2272.1.85.11.4.1.68 | ColumnrcKhiForwardingCbZagrosRspPlcPktCntCurr | read-only | current | RSP PLC Current Packet Count |
| 1.3.6.1.4.1.2272.1.85.11.4.1.69 | ColumnrcKhiForwardingCbZagrosRePlcPktCntPeak | read-only | current | RE PLC(Replica Engine Packet Limit Count)Peak Packet Count |
| 1.3.6.1.4.1.2272.1.85.11.4.1.70 | ColumnrcKhiForwardingCbZagrosRePlcPktCntCurr | read-only | current | RE PLC Current Packet Count |
| 1.3.6.1.4.1.2272.1.85.11.4.1.71 | ColumnrcKhiForwardingCbZagrosShPpPeak | read-only | current | PMM shared pool Peak Value |
| 1.3.6.1.4.1.2272.1.85.11.4.1.72 | ColumnrcKhiForwardingCbZagrosShPpCurr | read-only | current | PMM shared pool Current Value |
| 1.3.6.1.4.1.2272.1.85.11.4.1.73 | ColumnrcKhiForwardingCbZagrosEgressMultiCastPeak | read-only | current | PMM EgressMultiCast Peak Value |
| 1.3.6.1.4.1.2272.1.85.11.4.1.74 | ColumnrcKhiForwardingCbZagrosEgressMultiCastCurr | read-only | current | PMM EgressMultiCast Current Value |
| 1.3.6.1.4.1.2272.1.85.11.4.1.75 | ColumnrcKhiForwardingCbZagrosEgressOOBPeak | read-only | current | PMM EgressOOB(Out Of Band) Peak Value |
| 1.3.6.1.4.1.2272.1.85.11.4.1.76 | ColumnrcKhiForwardingCbZagrosEgressOOBCurr | read-only | current | PMM EgressOOB Current Value |
| 1.3.6.1.4.1.2272.1.85.11.4.1.77 | ColumnrcKhiForwardingCbZagrosIngressHeartbeatPeak | read-only | current | PMM IngressHeartbeat Peak Value |
| 1.3.6.1.4.1.2272.1.85.11.4.1.78 | ColumnrcKhiForwardingCbZagrosIngressHeartbeatCurr | read-only | current | PMM IngressHeartbeat Current Value |
| 1.3.6.1.4.1.2272.1.85.11.4.1.79 | ColumnrcKhiForwardingCbZagrosIngressCOPInsertPeak | read-only | current | PMM IngressCOPInsert Peak Value |
| 1.3.6.1.4.1.2272.1.85.11.4.1.80 | ColumnrcKhiForwardingCbZagrosIngressCOPInsertCurr | read-only | current | PMM IngressCOPInsert Current Value |
| 1.3.6.1.4.1.2272.1.85.11.4.1.81 | ColumnrcKhiForwardingCbZagrosIngressEfCtlPeak | read-only | current | PMM Ingress EF/CTL(Expedited Forward/Control)Peak Value |
| 1.3.6.1.4.1.2272.1.85.11.4.1.82 | ColumnrcKhiForwardingCbZagrosIngressEfCtlCurr | read-only | current | PMM Ingress EF/CTL Current Value |
| 1.3.6.1.4.1.2272.1.85.11.4.1.83 | ColumnrcKhiForwardingCbZagrosIngressAfBePeak | read-only | current | PMM Ingress AF/BE(Assured Forwarding/Best Effort)Peak Value |
| 1.3.6.1.4.1.2272.1.85.11.4.1.84 | ColumnrcKhiForwardingCbZagrosIngressAfBeCurr | read-only | current | PMM Ingress AF/BE Current Value |
| 1.3.6.1.4.1.2272.1.85.11.4.1.85 | ColumnrcKhiForwardingCbZagrosEgressL2BcUcPeak | read-only | current | PMM Egress L2BC/UC(Layer 2 Broadcast/Unicast)Peak Value |
| 1.3.6.1.4.1.2272.1.85.11.4.1.86 | ColumnrcKhiForwardingCbZagrosEgressL2BcUcCurr | read-only | current | PMM Egress L2BC/UC Current Value |
| 1.3.6.1.4.1.2272.1.85.11.4.1.87 | ColumnrcKhiForwardingCbZagrosEgressMirrorPeak | read-only | current | PMM Egress Mirror Peak Value |
| 1.3.6.1.4.1.2272.1.85.11.4.1.88 | ColumnrcKhiForwardingCbZagrosEgressMirrorCurr | read-only | current | PMM Egress Mirror Current Value |
| 1.3.6.1.4.1.2272.1.85.11.4.1.89 | ColumnrcKhiForwardingCbZagrosPool9Peak | read-only | current | PMM Pool9 Peak Value |
| 1.3.6.1.4.1.2272.1.85.11.4.1.90 | ColumnrcKhiForwardingCbZagrosPool9Curr | read-only | current | PMM Pool9 Current Value |
| 1.3.6.1.4.1.2272.1.85.11.4.1.91 | ColumnrcKhiForwardingCbZagrosPmmFpPlenErr | read-only | current | PMM FP PLEN Error Count |
| 1.3.6.1.4.1.2272.1.85.11.4.1.92 | ColumnrcKhiForwardingCbZagrosEFSInternalError0 | read-only | current | EFS Internal Error 0 Count |
| 1.3.6.1.4.1.2272.1.85.11.4.1.93 | ColumnrcKhiForwardingCbZagrosEFSInternalError1 | read-only | current | EFS Internal Error 1 Count |
| 1.3.6.1.4.1.2272.1.85.11.4.1.94 | ColumnrcKhiForwardingCbZagrosEFSInternalError2 | read-only | current | EFS Internal Error 2 Count |
| 1.3.6.1.4.1.2272.1.85.11.4.1.95 | ColumnrcKhiForwardingCbZagrosEFSInternalError3 | read-only | current | EFS Internal Error 3 Count |
| 1.3.6.1.4.1.2272.1.85.11.4.1.96 | ColumnrcKhiForwardingCbZagrosEFSInternalError4 | read-only | current | EFS Internal Error 4 Count |
| 1.3.6.1.4.1.2272.1.85.11.4.1.97 | ColumnrcKhiForwardingCbZagrosEFSInternalError5 | read-only | current | EFS Internal Error 5 Count |
| 1.3.6.1.4.1.2272.1.85.11.4.1.98 | ColumnrcKhiForwardingCbZagrosEFSInternalError6 | read-only | current | EFS Internal Error 6 Count |
| 1.3.6.1.4.1.2272.1.85.11.4.1.99 | ColumnrcKhiForwardingCbZagrosEFSInternalError7 | read-only | current | EFS Internal Error 7 Count |
| 1.3.6.1.4.1.2272.1.85.11.4.1.100 | ColumnrcKhiForwardingCbZagrosEFSInternalError8 | read-only | current | EFS Internal Error 8 Count |
| 1.3.6.1.4.1.2272.1.85.11.4.1.101 | ColumnrcKhiForwardingCbZagrosEFSInternalError9 | read-only | current | EFS Internal Error 9 Count |
| 1.3.6.1.4.1.2272.1.85.11.4.1.102 | ColumnrcKhiForwardingCbZagrosEFSInternalError10 | read-only | current | EFS Internal Error 10 Count |
| 1.3.6.1.4.1.2272.1.85.11.4.1.103 | ColumnrcKhiForwardingCbZagrosEFSInternalError11 | read-only | current | EFS Internal Error 11 Count |
| 1.3.6.1.4.1.2272.1.85.11.4.1.104 | ColumnrcKhiForwardingCbZagrosEFSInternalError12 | read-only | current | EFS Internal Error 12 Count |
| 1.3.6.1.4.1.2272.1.85.11.4.1.105 | ColumnrcKhiForwardingCbZagrosEFSInternalError13 | read-only | current | EFS Internal Error 13 Count |
| 1.3.6.1.4.1.2272.1.85.11.4.1.106 | ColumnrcKhiForwardingCbZagrosEFSInternalError14 | read-only | current | EFS Internal Error 14 Count |
| 1.3.6.1.4.1.2272.1.85.11.5 | TablercKhiForwardingCbRspTable | not-accessible | current | Forwarding Rsp Key Health Indicator MIB - All Cobalt Blue Data. |
| 1.3.6.1.4.1.2272.1.85.11.5.1 | RowrcKhiForwardingCbRspEntry | not-accessible | current | Forwarding Rsp KHI - Cobalt Blue table entry. |
| 1.3.6.1.4.1.2272.1.85.11.5.1.1 | ColumnrcKhiForwardingCbRspIndex | not-accessible | current | Index for CB's Forwarding Rsp Health data. There are 6 indicies reserved on a per slot basis. Depending on the card present and the data being requested not al… |
| 1.3.6.1.4.1.2272.1.85.11.5.1.2 | ColumnrcKhiForwardingCbRspLsmDrops | read-only | current | |
| 1.3.6.1.4.1.2272.1.85.11.5.1.3 | ColumnrcKhiForwardingCbRspExceptionDrops | read-only | current | |
| 1.3.6.1.4.1.2272.1.85.11.5.1.4 | ColumnrcKhiForwardingCbRspFrameErrorDrops | read-only | current | |
| 1.3.6.1.4.1.2272.1.85.11.5.1.5 | ColumnrcKhiForwardingCbRspFdibFullDrops | read-only | current | |
| 1.3.6.1.4.1.2272.1.85.11.5.1.6 | ColumnrcKhiForwardingCbRspIngrMltAllPortDown | read-only | current | |
| 1.3.6.1.4.1.2272.1.85.11.5.1.7 | ColumnrcKhiForwardingCbRspEgressMltAllPortDownDrops | read-only | current | |
| 1.3.6.1.4.1.2272.1.85.11.5.1.8 | ColumnrcKhiForwardingCbRspEgressIpMcastRecordsNotFound | read-only | current | |
| 1.3.6.1.4.1.2272.1.85.11.5.1.9 | ColumnrcKhiForwardingCbRspEgressIpMcastMltWrongPort | read-only | current | |
| 1.3.6.1.4.1.2272.1.85.11.5.1.10 | ColumnrcKhiForwardingCbRspEgressIpMcastSourceKnockout | read-only | current | |
| 1.3.6.1.4.1.2272.1.85.11.5.1.11 | ColumnrcKhiForwardingCbRspIngressDaNotFoundDrops | read-only | current | |
| 1.3.6.1.4.1.2272.1.85.11.5.1.12 | ColumnrcKhiForwardingCbRspIngressUnknown | read-only | current | |
| 1.3.6.1.4.1.2272.1.85.11.5.1.13 | ColumnrcKhiForwardingCbRspIngressDiscardDestIdDrops | read-only | current | |
| 1.3.6.1.4.1.2272.1.85.11.5.1.14 | ColumnrcKhiForwardingCbRspMacLearningPacketDrops | read-only | current | |
| 1.3.6.1.4.1.2272.1.85.11.5.1.15 | ColumnrcKhiForwardingCbRspIngrMltAllPortsDown | read-only | current | |
| 1.3.6.1.4.1.2272.1.85.11.5.1.16 | ColumnrcKhiForwardingCbRspIngressIpmcSupressionDrops | read-only | current | |
| 1.3.6.1.4.1.2272.1.85.11.5.1.17 | ColumnrcKhiForwardingCbRspUnsupportedFeatureDrops | read-only | current | |
| 1.3.6.1.4.1.2272.1.85.11.5.1.18 | ColumnrcKhiForwardingCbRspAclDiscards | read-only | current | |
| 1.3.6.1.4.1.2272.1.85.11.5.1.19 | ColumnrcKhiForwardingCbRspIngressIpmcLookupFails | read-only | current | |
| 1.3.6.1.4.1.2272.1.85.11.5.1.20 | ColumnrcKhiForwardingCbRspIpv4DestIpLookupFails | read-only | current | |
| 1.3.6.1.4.1.2272.1.85.11.5.1.21 | ColumnrcKhiForwardingCbRspIpv4SourceIpLookupFails | read-only | current | |
| 1.3.6.1.4.1.2272.1.85.11.5.1.22 | ColumnrcKhiForwardingCbRspL3MirrorDrops | read-only | current | |
| 1.3.6.1.4.1.2272.1.85.11.5.1.23 | ColumnrcKhiForwardingCbRspIpV6LookupFails | read-only | current | |
| 1.3.6.1.4.1.2272.1.85.11.5.1.24 | ColumnrcKhiForwardingCbRspIpV6TunnelLookupV4Fails | read-only | current | |
| 1.3.6.1.4.1.2272.1.85.11.6 | TablercKhiForwardingCbQeTable | not-accessible | current | Forwarding Qe Key Health Indicator MIB - All Cobalt Blue Data. |
| 1.3.6.1.4.1.2272.1.85.11.6.1 | RowrcKhiForwardingCbQeEntry | not-accessible | current | Forwarding Qe KHI - Cobalt Blue table entry. |
| 1.3.6.1.4.1.2272.1.85.11.6.1.1 | ColumnrcKhiForwardingCbQeIndex | not-accessible | current | Index for CB's Forwarding Qe Health data. There are 6 indicies reserved on a per slot basis. Depending on the card present and the data being requested not all… |
| 1.3.6.1.4.1.2272.1.85.11.6.1.2 | ColumnrcKhiForwardingCbQeIngressQmAgrAcceptedPktCnt0 | read-only | current | |
| 1.3.6.1.4.1.2272.1.85.11.6.1.3 | ColumnrcKhiForwardingCbQeIngressQmAgrMarkedPktCnt0 | read-only | current | |
| 1.3.6.1.4.1.2272.1.85.11.6.1.4 | ColumnrcKhiForwardingCbQeIngressQmAgrAcceptedPktCnt1 | read-only | current | |
| 1.3.6.1.4.1.2272.1.85.11.6.1.5 | ColumnrcKhiForwardingCbQeIngressQmAgrMarkedPktCnt1 | read-only | current | |
| 1.3.6.1.4.1.2272.1.85.11.6.1.6 | ColumnrcKhiForwardingCbQeIngressQmAgrAcceptedPktCnt2 | read-only | current | |
| 1.3.6.1.4.1.2272.1.85.11.6.1.7 | ColumnrcKhiForwardingCbQeIngressQmAgrMarkedPktCnt2 | read-only | current | |
| 1.3.6.1.4.1.2272.1.85.11.6.1.8 | ColumnrcKhiForwardingCbQeIngressQmAgrAcceptedPktCnt3 | read-only | current | |
| 1.3.6.1.4.1.2272.1.85.11.6.1.9 | ColumnrcKhiForwardingCbQeIngressQmAgrDequeuedPktCnt | read-only | current | |
| 1.3.6.1.4.1.2272.1.85.11.6.1.10 | ColumnrcKhiForwardingCbQeIngressPmSwitchPktCnt | read-only | current | |
| 1.3.6.1.4.1.2272.1.85.11.6.1.11 | ColumnrcKhiForwardingCbQeIngressPmLocalPktCnt | read-only | current | |
| 1.3.6.1.4.1.2272.1.85.11.6.1.12 | ColumnrcKhiForwardingCbQeIngressPmSwitchTestPktCnt | read-only | current | |
| 1.3.6.1.4.1.2272.1.85.11.6.1.13 | ColumnrcKhiForwardingCbQeIngressPmLocalTestPktCnt | read-only | current | |
| 1.3.6.1.4.1.2272.1.85.11.6.1.14 | ColumnrcKhiForwardingCbQeIngressSr0RxP0PktCnt | read-only | current | |
| 1.3.6.1.4.1.2272.1.85.11.6.1.15 | ColumnrcKhiForwardingCbQeIngressSr1RxP0PktCnt | read-only | current | |
| 1.3.6.1.4.1.2272.1.85.11.6.1.16 | ColumnrcKhiForwardingCbQeIngressSr0RxP1PktCnt | read-only | current | |
| 1.3.6.1.4.1.2272.1.85.11.6.1.17 | ColumnrcKhiForwardingCbQeIngressSr1RxP1PktCnt | read-only | current | |
| 1.3.6.1.4.1.2272.1.85.11.6.1.18 | ColumnrcKhiForwardingCbQeIngressSr0RxP2PktCnt | read-only | current | |
| 1.3.6.1.4.1.2272.1.85.11.6.1.19 | ColumnrcKhiForwardingCbQeIngressSr1RxP2PktCnt | read-only | current | |
| 1.3.6.1.4.1.2272.1.85.11.6.1.20 | ColumnrcKhiForwardingCbQeIngressSr0RxP3PktCnt | read-only | current | |
| 1.3.6.1.4.1.2272.1.85.11.6.1.21 | ColumnrcKhiForwardingCbQeIngressSr1RxP3PktCnt | read-only | current | |
| 1.3.6.1.4.1.2272.1.85.11.6.1.22 | ColumnrcKhiForwardingCbQeIngressSr0RxP4PktCnt | read-only | current | |
| 1.3.6.1.4.1.2272.1.85.11.6.1.23 | ColumnrcKhiForwardingCbQeIngressSr1RxP4PktCnt | read-only | current | |
| 1.3.6.1.4.1.2272.1.85.11.6.1.24 | ColumnrcKhiForwardingCbQeIngressSr0RxP5PktCnt | read-only | current | |
| 1.3.6.1.4.1.2272.1.85.11.6.1.25 | ColumnrcKhiForwardingCbQeIngressSr1RxP5PktCnt | read-only | current | |
| 1.3.6.1.4.1.2272.1.85.11.6.1.26 | ColumnrcKhiForwardingCbQeIngressSr0RxP6PktCnt | read-only | current | |
| 1.3.6.1.4.1.2272.1.85.11.6.1.27 | ColumnrcKhiForwardingCbQeIngressSr1RxP6PktCnt | read-only | current | |
| 1.3.6.1.4.1.2272.1.85.11.6.1.28 | ColumnrcKhiForwardingCbQeIngressSr0RxP7PktCnt | read-only | current | |
| 1.3.6.1.4.1.2272.1.85.11.6.1.29 | ColumnrcKhiForwardingCbQeIngressSr1RxP7PktCnt | read-only | current | |
| 1.3.6.1.4.1.2272.1.85.11.6.1.30 | ColumnrcKhiForwardingCbQeIngressSr0RxP8PktCnt | read-only | current | |
| 1.3.6.1.4.1.2272.1.85.11.6.1.31 | ColumnrcKhiForwardingCbQeIngressSr1RxP8PktCnt | read-only | current | |
| 1.3.6.1.4.1.2272.1.85.11.6.1.32 | ColumnrcKhiForwardingCbQeIngressSr0RxP9PktCnt | read-only | current | |
| 1.3.6.1.4.1.2272.1.85.11.6.1.33 | ColumnrcKhiForwardingCbQeIngressSr1RxP9PktCnt | read-only | current | |
| 1.3.6.1.4.1.2272.1.85.11.6.1.34 | ColumnrcKhiForwardingCbQeIngressSr0RxP10PktCnt | read-only | current | |
| 1.3.6.1.4.1.2272.1.85.11.6.1.35 | ColumnrcKhiForwardingCbQeIngressSr1RxP10PktCnt | read-only | current | |
| 1.3.6.1.4.1.2272.1.85.11.6.1.36 | ColumnrcKhiForwardingCbQeIngressSr0RxP11PktCnt | read-only | current | |
| 1.3.6.1.4.1.2272.1.85.11.6.1.37 | ColumnrcKhiForwardingCbQeIngressSr1RxP11PktCnt | read-only | current | |
| 1.3.6.1.4.1.2272.1.85.11.6.1.38 | ColumnrcKhiForwardingCbQeIngressSr0RxP12PktCnt | read-only | current | |
| 1.3.6.1.4.1.2272.1.85.11.6.1.39 | ColumnrcKhiForwardingCbQeIngressSr1RxP12PktCnt | read-only | current | |
| 1.3.6.1.4.1.2272.1.85.11.6.1.40 | ColumnrcKhiForwardingCbQeIngressSr0RxP13PktCnt | read-only | current | |
| 1.3.6.1.4.1.2272.1.85.11.6.1.41 | ColumnrcKhiForwardingCbQeIngressSr1RxP13PktCnt | read-only | current | |
| 1.3.6.1.4.1.2272.1.85.11.6.1.42 | ColumnrcKhiForwardingCbQeIngressSr0RxP14PktCnt | read-only | current | |
| 1.3.6.1.4.1.2272.1.85.11.6.1.43 | ColumnrcKhiForwardingCbQeIngressSr1RxP14PktCnt | read-only | current | |
| 1.3.6.1.4.1.2272.1.85.11.6.1.44 | ColumnrcKhiForwardingCbQeIngressSr0RxP15PktCnt | read-only | current | |
| 1.3.6.1.4.1.2272.1.85.11.6.1.45 | ColumnrcKhiForwardingCbQeIngressSr1RxP15PktCnt | read-only | current | |
| 1.3.6.1.4.1.2272.1.85.11.6.1.46 | ColumnrcKhiForwardingCbQeIngressSr0RxTestPktCnt | read-only | current | |
| 1.3.6.1.4.1.2272.1.85.11.6.1.47 | ColumnrcKhiForwardingCbQeIngressSr1RxTestPktCnt | read-only | current | |
| 1.3.6.1.4.1.2272.1.85.11.6.1.48 | ColumnrcKhiForwardingCbQeIngressRbIdp0RequestPktCnt | read-only | current | |
| 1.3.6.1.4.1.2272.1.85.11.6.1.49 | ColumnrcKhiForwardingCbQeIngressRbIdp1RequestPktCnt | read-only | current | |
| 1.3.6.1.4.1.2272.1.85.11.6.1.50 | ColumnrcKhiForwardingCbQeIngressRbIdp2RequestPktCnt | read-only | current | |
| 1.3.6.1.4.1.2272.1.85.11.6.1.51 | ColumnrcKhiForwardingCbQeIngressRbIdp3RequestPktCnt | read-only | current | |
| 1.3.6.1.4.1.2272.1.85.11.6.1.52 | ColumnrcKhiForwardingCbQeIngressRbIdp4RequestPktCnt | read-only | current | |
| 1.3.6.1.4.1.2272.1.85.11.6.1.53 | ColumnrcKhiForwardingCbQeIngressRbEnqrespPktCnt | read-only | current | |
| 1.3.6.1.4.1.2272.1.85.11.6.1.54 | ColumnrcKhiForwardingCbQeEgressSvPktCnt | read-only | current | |
| 1.3.6.1.4.1.2272.1.85.11.6.1.55 | ColumnrcKhiForwardingCbQeEgressSt0P0TxPktCnt | read-only | current | |
| 1.3.6.1.4.1.2272.1.85.11.6.1.56 | ColumnrcKhiForwardingCbQeEgressSt1P0TxPktCnt | read-only | current | |
| 1.3.6.1.4.1.2272.1.85.11.6.1.57 | ColumnrcKhiForwardingCbQeEgressSt0P1TxPktCnt | read-only | current | |
| 1.3.6.1.4.1.2272.1.85.11.6.1.58 | ColumnrcKhiForwardingCbQeEgressSt1P1TxPktCnt | read-only | current | |
| 1.3.6.1.4.1.2272.1.85.11.6.1.59 | ColumnrcKhiForwardingCbQeEgressSt0P2TxPktCnt | read-only | current | |
| 1.3.6.1.4.1.2272.1.85.11.6.1.60 | ColumnrcKhiForwardingCbQeEgressSt1P2TxPktCnt | read-only | current | |
| 1.3.6.1.4.1.2272.1.85.11.6.1.61 | ColumnrcKhiForwardingCbQeEgressSt0P3TxPktCnt | read-only | current | |
| 1.3.6.1.4.1.2272.1.85.11.6.1.62 | ColumnrcKhiForwardingCbQeEgressSt1P3TxPktCnt | read-only | current | |
| 1.3.6.1.4.1.2272.1.85.11.6.1.63 | ColumnrcKhiForwardingCbQeEgressSt0P4TxPktCnt | read-only | current | |
| 1.3.6.1.4.1.2272.1.85.11.6.1.64 | ColumnrcKhiForwardingCbQeEgressSt1P4TxPktCnt | read-only | current | |
| 1.3.6.1.4.1.2272.1.85.11.6.1.65 | ColumnrcKhiForwardingCbQeEgressSt0P5TxPktCnt | read-only | current | |
| 1.3.6.1.4.1.2272.1.85.11.6.1.66 | ColumnrcKhiForwardingCbQeEgressSt1P5TxPktCnt | read-only | current | |
| 1.3.6.1.4.1.2272.1.85.11.6.1.67 | ColumnrcKhiForwardingCbQeEgressSt0P6TxPktCnt | read-only | current | |
| 1.3.6.1.4.1.2272.1.85.11.6.1.68 | ColumnrcKhiForwardingCbQeEgressSt1P6TxPktCnt | read-only | current | |
| 1.3.6.1.4.1.2272.1.85.11.6.1.69 | ColumnrcKhiForwardingCbQeEgressSt0P7TxPktCnt | read-only | current | |
| 1.3.6.1.4.1.2272.1.85.11.6.1.70 | ColumnrcKhiForwardingCbQeEgressSt1P7TxPktCnt | read-only | current | |
| 1.3.6.1.4.1.2272.1.85.11.6.1.71 | ColumnrcKhiForwardingCbQeEgressSt0P8TxPktCnt | read-only | current | |
| 1.3.6.1.4.1.2272.1.85.11.6.1.72 | ColumnrcKhiForwardingCbQeEgressSt1P8TxPktCnt | read-only | current | |
| 1.3.6.1.4.1.2272.1.85.11.6.1.73 | ColumnrcKhiForwardingCbQeEgressSt0P9TxPktCnt | read-only | current | |
| 1.3.6.1.4.1.2272.1.85.11.6.1.74 | ColumnrcKhiForwardingCbQeEgressSt1P9TxPktCnt | read-only | current | |
| 1.3.6.1.4.1.2272.1.85.11.6.1.75 | ColumnrcKhiForwardingCbQeEgressSt0P10TxPktCnt | read-only | current | |
| 1.3.6.1.4.1.2272.1.85.11.6.1.76 | ColumnrcKhiForwardingCbQeEgressSt1P10TxPktCnt | read-only | current | |
| 1.3.6.1.4.1.2272.1.85.11.6.1.77 | ColumnrcKhiForwardingCbQeEgressSt0P11TxPktCnt | read-only | current | |
| 1.3.6.1.4.1.2272.1.85.11.6.1.78 | ColumnrcKhiForwardingCbQeEgressSt1P11TxPktCnt | read-only | current | |
| 1.3.6.1.4.1.2272.1.85.11.6.1.79 | ColumnrcKhiForwardingCbQeEgressSt0P12TxPktCnt | read-only | current | |
| 1.3.6.1.4.1.2272.1.85.11.6.1.80 | ColumnrcKhiForwardingCbQeEgressSt1P12TxPktCnt | read-only | current | |
| 1.3.6.1.4.1.2272.1.85.11.6.1.81 | ColumnrcKhiForwardingCbQeEgressSt0P13TxPktCnt | read-only | current | |
| 1.3.6.1.4.1.2272.1.85.11.6.1.82 | ColumnrcKhiForwardingCbQeEgressSt1P13TxPktCnt | read-only | current | |
| 1.3.6.1.4.1.2272.1.85.11.6.1.83 | ColumnrcKhiForwardingCbQeEgressSt0P14TxPktCnt | read-only | current | |
| 1.3.6.1.4.1.2272.1.85.11.6.1.84 | ColumnrcKhiForwardingCbQeEgressSt1P14TxPktCnt | read-only | current | |
| 1.3.6.1.4.1.2272.1.85.11.6.1.85 | ColumnrcKhiForwardingCbQeEgressSt0P15TxPktCnt | read-only | current | |
| 1.3.6.1.4.1.2272.1.85.11.6.1.86 | ColumnrcKhiForwardingCbQeEgressSt1P15TxPktCnt | read-only | current | |
| 1.3.6.1.4.1.2272.1.85.11.6.1.87 | ColumnrcKhiForwardingCbQeEgressSt0TxTestPktCnt | read-only | current | |
| 1.3.6.1.4.1.2272.1.85.11.6.1.88 | ColumnrcKhiForwardingCbQeEgressSt1TxTestPktCnt | read-only | current | |
| 1.3.6.1.4.1.2272.1.85.11.6.1.89 | ColumnrcKhiForwardingCbQeSvPartialPktCnt | read-only | current | |
| 1.3.6.1.4.1.2272.1.85.11.6.1.90 | ColumnrcKhiForwardingCbQeQmAgrWredDroppedPktCnt0 | read-only | current | |
| 1.3.6.1.4.1.2272.1.85.11.6.1.91 | ColumnrcKhiForwardingCbQeQmAgrWredDroppedPktCnt1 | read-only | current | |
| 1.3.6.1.4.1.2272.1.85.11.6.1.92 | ColumnrcKhiForwardingCbQeQmAgrWredDroppedPktCnt2 | read-only | current | |
| 1.3.6.1.4.1.2272.1.85.11.6.1.93 | ColumnrcKhiForwardingCbQeQmAgrPolicedDroppedPktCnt | read-only | current | |
| 1.3.6.1.4.1.2272.1.85.11.6.1.94 | ColumnrcKhiForwardingCbQeQmAgrNonWredDroppedPktCnt | read-only | current | |
| 1.3.6.1.4.1.2272.1.85.11.6.1.95 | ColumnrcKhiForwardingCbQeQmError1 | read-only | current | |
| 1.3.6.1.4.1.2272.1.85.11.7 | TablercKhiForwardingIfpTable | not-accessible | deprecated | Forwarding Ifp Key Health Indicator MIB - All VSP Data. |
| 1.3.6.1.4.1.2272.1.85.11.7.1 | RowrcKhiForwardingIfpEntry | not-accessible | deprecated | Forwarding Ifp KHI - VSP table entry. |
| 1.3.6.1.4.1.2272.1.85.11.7.1.1 | ColumnrcKhiForwardingIfpSlot | not-accessible | deprecated | Slot Number |
| 1.3.6.1.4.1.2272.1.85.11.7.1.2 | ColumnrcKhiForwardingIfpIndex | not-accessible | deprecated | Index of the IFP Rule |
| 1.3.6.1.4.1.2272.1.85.11.7.1.3 | ColumnrcKhiForwardingIfpName | read-only | deprecated | Name of the IFP Rule |
| 1.3.6.1.4.1.2272.1.85.11.7.1.4 | ColumnrcKhiForwardingIfpSlice0Ports | read-only | deprecated | Range of Ports in slice0 of the slot. Display format will have Ports 1-24 or 1-8 based on the card type |
| 1.3.6.1.4.1.2272.1.85.11.7.1.5 | ColumnrcKhiForwardingIfpSlice0Cnt | read-only | deprecated | Counter for slice 0 |
| 1.3.6.1.4.1.2272.1.85.11.7.1.6 | ColumnrcKhiForwardingIfpSlice1Ports | read-only | deprecated | Range of Ports in slice1 of the slot. Display format will have Ports 25-48 or 9-16 based on the card type |
| 1.3.6.1.4.1.2272.1.85.11.7.1.7 | ColumnrcKhiForwardingIfpSlice1Cnt | read-only | deprecated | Counter for slice 1 |
| 1.3.6.1.4.1.2272.1.85.11.7.1.8 | ColumnrcKhiForwardingIfpSlice2Ports | read-only | deprecated | Range of Ports in slice2 of the slot. Display format will have Ports 0 or 17-24 based on the card type |
| 1.3.6.1.4.1.2272.1.85.11.7.1.9 | ColumnrcKhiForwardingIfpSlice2Cnt | read-only | deprecated | Counter for slice 2 |
| 1.3.6.1.4.1.2272.1.85.11.8 | TablercKhiForwardingIfpNewTable | not-accessible | current | Forwarding Ifp New Key Health Indicator MIB. This table replaces the old table rcKhiForwardingIfpTable |
| 1.3.6.1.4.1.2272.1.85.11.8.1 | RowrcKhiForwardingIfpNewEntry | not-accessible | current | Forwarding Ifp KHI - VSP table entry. |
| 1.3.6.1.4.1.2272.1.85.11.8.1.1 | ColumnrcKhiForwardingIfpNewSlot | not-accessible | current | Slot Number |
| 1.3.6.1.4.1.2272.1.85.11.8.1.2 | ColumnrcKhiForwardingIfpNewTblType | not-accessible | current | Type of table IFP PCV for both 1G and 10G cards. IFP PCV MAC-in-MAC Tagged and Untagged are for 10G card |
| 1.3.6.1.4.1.2272.1.85.11.8.1.3 | ColumnrcKhiForwardingIfpNewIndex | not-accessible | current | Index of the IFP Rule |
| 1.3.6.1.4.1.2272.1.85.11.8.1.4 | ColumnrcKhiForwardingIfpNewName | read-only | current | Name of the IFP Rule |
| 1.3.6.1.4.1.2272.1.85.11.8.1.5 | ColumnrcKhiForwardingIfpNewSlice0Ports | read-only | current | Range of Ports in slice0 of the slot. Display format will have Ports 1-24 or 1-8 based on the card type |
| 1.3.6.1.4.1.2272.1.85.11.8.1.6 | ColumnrcKhiForwardingIfpNewSlice0Cnt | read-only | current | Counter for slice 0 |
| 1.3.6.1.4.1.2272.1.85.11.8.1.7 | ColumnrcKhiForwardingIfpNewSlice1Ports | read-only | current | Range of Ports in slice1 of the slot. Display format will have Ports 25-48 or 9-16 based on the card type |
| 1.3.6.1.4.1.2272.1.85.11.8.1.8 | ColumnrcKhiForwardingIfpNewSlice1Cnt | read-only | current | Counter for slice 1 |
| 1.3.6.1.4.1.2272.1.85.11.8.1.9 | ColumnrcKhiForwardingIfpNewSlice2Ports | read-only | current | Range of Ports in slice2 of the slot. Display format will have Ports 0 or 17-24 based on the card type |
| 1.3.6.1.4.1.2272.1.85.11.8.1.10 | ColumnrcKhiForwardingIfpNewSlice2Cnt | read-only | current | Counter for slice 2 |
| 1.3.6.1.4.1.2272.1.85.11.9 | TablercKhiForwardingRofQeTable | not-accessible | current | Forwarding Qe Key Health Indicator MIB for RoF. |
| 1.3.6.1.4.1.2272.1.85.11.9.1 | RowrcKhiForwardingRofQeEntry | not-accessible | current | Forwarding Qe KHI - RoF. |
| 1.3.6.1.4.1.2272.1.85.11.9.1.1 | ColumnrcKhiForwardingRofQeSlot | not-accessible | current | Slot Number |
| 1.3.6.1.4.1.2272.1.85.11.9.1.2 | ColumnrcKhiForwardingRofQeSlice | not-accessible | current | Slice Number |
| 1.3.6.1.4.1.2272.1.85.11.9.1.3 | ColumnrcKhiForwardingRofHg0RxPkts | read-only | current | pkts received via HiGig0 |
| 1.3.6.1.4.1.2272.1.85.11.9.1.4 | ColumnrcKhiForwardingRofHg1RxPkts | read-only | current | pkts received via HiGig1 |
| 1.3.6.1.4.1.2272.1.85.11.9.1.5 | ColumnrcKhiForwardingRofHg2RxPkts | read-only | current | pkts received via HiGig2 |
| 1.3.6.1.4.1.2272.1.85.11.9.1.6 | ColumnrcKhiForwardingRofHg3RxPkts | read-only | current | pkts received via HiGig3 |
| 1.3.6.1.4.1.2272.1.85.11.9.1.7 | ColumnrcKhiForwardingRofHg0TxPkts | read-only | current | pkts transmitted via HiGig0 |
| 1.3.6.1.4.1.2272.1.85.11.9.1.8 | ColumnrcKhiForwardingRofHg1TxPkts | read-only | current | pkts transmitted via HiGig1 |
| 1.3.6.1.4.1.2272.1.85.11.9.1.9 | ColumnrcKhiForwardingRofHg2TxPkts | read-only | current | pkts transmitted via HiGig2 |
| 1.3.6.1.4.1.2272.1.85.11.9.1.10 | ColumnrcKhiForwardingRofHg3TxPkts | read-only | current | pkts transmitted via HiGig3 |
| 1.3.6.1.4.1.2272.1.85.11.9.1.11 | ColumnrcKhiForwardingRofRbIF1DropCnt | read-only | current | pkts dropped on IF1 (HG0) |
| 1.3.6.1.4.1.2272.1.85.11.9.1.12 | ColumnrcKhiForwardingRofRbIF2DropCnt | read-only | current | pkts dropped on IF1 (HG1) |
| 1.3.6.1.4.1.2272.1.85.11.9.1.13 | ColumnrcKhiForwardingRofRbIF3DropCnt | read-only | current | pkts dropped on IF1 (HG2) |
| 1.3.6.1.4.1.2272.1.85.11.9.1.14 | ColumnrcKhiForwardingRofRbIF4DropCnt | read-only | current | pkts dropped on IF1 (HG3) |
| 1.3.6.1.4.1.2272.1.85.11.9.1.15 | ColumnrcKhiForwardingRofFdPktDropCount | read-only | current | pkts dropped in FDM block |
| 1.3.6.1.4.1.2272.1.85.11.9.1.16 | ColumnrcKhiForwardingRofFrRxPktschannelA | read-only | current | pkts received from fabric via channel A |
| 1.3.6.1.4.1.2272.1.85.11.9.1.17 | ColumnrcKhiForwardingRofFrRxPktschannelB | read-only | current | pkts received from fabric via channel B |
| 1.3.6.1.4.1.2272.1.85.11.9.1.18 | ColumnrcKhiForwardingRofNumDP0PktsAccepted | read-only | current | DP0 pkts accepted |
| 1.3.6.1.4.1.2272.1.85.11.9.1.19 | ColumnrcKhiForwardingRofNumDP1PktsAccepted | read-only | current | DP1 pkts accepted |
| 1.3.6.1.4.1.2272.1.85.11.9.1.20 | ColumnrcKhiForwardingRofNumDP2PktsAccepted | read-only | current | DP2 pkts accepted |
| 1.3.6.1.4.1.2272.1.85.11.9.1.21 | ColumnrcKhiForwardingRofNumDP3PktsAccepted | read-only | current | DP3 pkts accepted |
| 1.3.6.1.4.1.2272.1.85.11.9.1.22 | ColumnrcKhiForwardingRofNumDP0PktsDroppedDueToWRED | read-only | current | DP0 pkts dropped due to WRED |
| 1.3.6.1.4.1.2272.1.85.11.9.1.23 | ColumnrcKhiForwardingRofNumDP1PktsDroppedDueToWRED | read-only | current | DP1 pkts dropped due to WRED |
| 1.3.6.1.4.1.2272.1.85.11.9.1.24 | ColumnrcKhiForwardingRofNumDP2PktsDroppedDueToWRED | read-only | current | DP2 pkts dropped due to WRED |
| 1.3.6.1.4.1.2272.1.85.11.9.1.25 | ColumnrcKhiForwardingRofNumDP3PktsDroppedDueToWRED | read-only | current | DP3 pkts dropped due to WRED |
| 1.3.6.1.4.1.2272.1.85.11.9.1.26 | ColumnrcKhiForwardingRofNumDP0PktsMarkedDueToWRED | read-only | current | DP0 pkts marked due to WRED |
| 1.3.6.1.4.1.2272.1.85.11.9.1.27 | ColumnrcKhiForwardingRofNumDP1PktsMarkedDueToWRED | read-only | current | DP1 pkts marked due to WRED |
| 1.3.6.1.4.1.2272.1.85.11.9.1.28 | ColumnrcKhiForwardingRofNumDP2PktsMarkedDueToWRED | read-only | current | DP2 pkts marked due to WRED |
| 1.3.6.1.4.1.2272.1.85.11.9.1.29 | ColumnrcKhiForwardingRofNumDP3PktsMarkedDueToWRED | read-only | current | DP3 pkts marked due to WRED |
| 1.3.6.1.4.1.2272.1.85.11.9.1.30 | ColumnrcKhiForwardingRofNumDP0PktsDroppedNonWRED | read-only | current | DP0 pkts dropped non-WRED |
| 1.3.6.1.4.1.2272.1.85.11.9.1.31 | ColumnrcKhiForwardingRofNumDP1PktsDroppedNonWRED | read-only | current | DP1 pkts dropped non-WRED |
| 1.3.6.1.4.1.2272.1.85.11.9.1.32 | ColumnrcKhiForwardingRofNumDP2PktsDroppedNonWRED | read-only | current | DP2 pkts dropped non-WRED |
| 1.3.6.1.4.1.2272.1.85.11.9.1.33 | ColumnrcKhiForwardingRofNumDP3PktsDroppedNonWRED | read-only | current | DP3 pkts dropped non-WRED |
| 1.3.6.1.4.1.2272.1.85.11.9.1.34 | ColumnrcKhiForwardingRofNumPktsDiscardedForBadQueNum | read-only | current | pkts dropped due to bad queue num |
| 1.3.6.1.4.1.2272.1.85.11.9.1.35 | ColumnrcKhiForwardingRofNumQueuesAgedOut | read-only | current | queues deleted due age |
| 1.3.6.1.4.1.2272.1.85.11.9.1.36 | ColumnrcKhiForwardingRofNumPktsDequeuedFromQM | read-only | current | pkts QM dequeued |
| 1.3.6.1.4.1.2272.1.85.11.9.1.37 | ColumnrcKhiForwardingRofNumHcfcMsgsDroppedDueToCRCerror | read-only | current | msgs dropped due to CRC error |
| 1.3.6.1.4.1.2272.1.85.11.10 | TablercKhiForwardingRofIfpTable | not-accessible | current | KHI Forwarding IFP Drop Stats for RoF |
| 1.3.6.1.4.1.2272.1.85.11.10.1 | RowrcKhiForwardingRofIfpEntry | not-accessible | current | KHI Forwarding IFP Drop Stats for RoF |
| 1.3.6.1.4.1.2272.1.85.11.10.1.1 | ColumnrcKhiForwardingRofIfpSlot | not-accessible | current | Slot Number |
| 1.3.6.1.4.1.2272.1.85.11.10.1.2 | ColumnrcKhiForwardingRofIfpSlice | not-accessible | current | Slice Number |
| 1.3.6.1.4.1.2272.1.85.11.10.1.3 | ColumnrcKhiForwardingRofIfpLane | not-accessible | current | Lane |
| 1.3.6.1.4.1.2272.1.85.11.10.1.4 | ColumnrcKhiForwardingRofIfpMcRateLimitDrop | read-only | current | MAC_RATE_LIMIT_DROP |
| 1.3.6.1.4.1.2272.1.85.11.10.1.5 | ColumnrcKhiForwardingRofIfpBcRateLimitDrop | read-only | current | BC_RATE_LIMIT_DROP |
| 1.3.6.1.4.1.2272.1.85.11.10.1.6 | ColumnrcKhiForwardingRofIfpIpv6TcpMcDrop | read-only | current | IPV6_TCP_MC_DROP |
| 1.3.6.1.4.1.2272.1.85.11.10.1.7 | ColumnrcKhiForwardingRofIfpIpv4TcpMcDrop | read-only | current | IPV4_TCP_MC_DROP |
| 1.3.6.1.4.1.2272.1.85.11.10.1.8 | ColumnrcKhiForwardingRofIfpIfpDrop | read-only | current | IFP_DROP |
| 1.3.6.1.4.1.2272.1.85.11.10.1.9 | ColumnrcKhiForwardingRofIfpVlanMemDrop | read-only | current | VLAN_MEM_DROP |
| 1.3.6.1.4.1.2272.1.85.11.10.1.10 | ColumnrcKhiForwardingRofIfpBlacklistDrop | read-only | current | BLACKLIST_DROP |
| 1.3.6.1.4.1.2272.1.85.11.10.1.11 | ColumnrcKhiForwardingRofIfpIpv6SipLoopbackDrop | read-only | current | IPV6_SIP_LOOPBACK_DROP |
| 1.3.6.1.4.1.2272.1.85.11.10.1.12 | ColumnrcKhiForwardingRofIfpBadIpv4AddrDrop | read-only | current | BAD_IPV4_ADDR_DROP |
| 1.3.6.1.4.1.2272.1.85.11.10.1.13 | ColumnrcKhiForwardingRofIfpMacLoopbackDrop | read-only | current | MAC_LOOPBACK_DROP |
| 1.3.6.1.4.1.2272.1.85.11.10.1.14 | ColumnrcKhiForwardingRofIfp1dotPDrop | read-only | current | 1DOTP_DROP |
| 1.3.6.1.4.1.2272.1.85.11.10.1.15 | ColumnrcKhiForwardingRofIfpCfiDrop | read-only | current | CFI_DROP |
| 1.3.6.1.4.1.2272.1.85.11.10.1.16 | ColumnrcKhiForwardingRofIfpUntagDrop | read-only | current | UNTAG_DROP |
| 1.3.6.1.4.1.2272.1.85.11.10.1.17 | ColumnrcKhiForwardingRofIfpTagDrop | read-only | current | TAG_DROP |
| 1.3.6.1.4.1.2272.1.85.11.10.1.18 | ColumnrcKhiForwardingRofIfpIstFilterDrop | read-only | current | IST_FILTER_DROP |
| 1.3.6.1.4.1.2272.1.85.11.10.1.19 | ColumnrcKhiForwardingRofIfpIpVerDrop | read-only | current | IP_VER_DROP |
| 1.3.6.1.4.1.2272.1.85.11.10.1.20 | ColumnrcKhiForwardingRofIfpVid0Drop | read-only | current | VID_0_DROP |
| 1.3.6.1.4.1.2272.1.85.11.10.1.21 | ColumnrcKhiForwardingRofIfpUnsupportFrameDrop | read-only | current | UNSUPPORTED_FRAME_DROP |
| 1.3.6.1.4.1.2272.1.85.11.10.1.22 | ColumnrcKhiForwardingRofIfpIpv4MacTtl0Drop | read-only | current | IPV4_MC_TTL0_DROP |
| 1.3.6.1.4.1.2272.1.85.11.11 | TablercKhiForwardingRofIfpForwTable | not-accessible | current | KHI Forwarding IFP Forwading Stats for RoF |
| 1.3.6.1.4.1.2272.1.85.11.11.1 | RowrcKhiForwardingRofIfpForwEntry | not-accessible | current | KHI Forwarding IFP Forw Stats for RoF |
| 1.3.6.1.4.1.2272.1.85.11.11.1.1 | ColumnrcKhiForwardingRofIfpForwSlot | not-accessible | current | Slot Number |
| 1.3.6.1.4.1.2272.1.85.11.11.1.2 | ColumnrcKhiForwardingRofIfpForwSlice | not-accessible | current | Slice Number |
| 1.3.6.1.4.1.2272.1.85.11.11.1.3 | ColumnrcKhiForwardingRofIfpForwLane | not-accessible | current | Lane Number |
| 1.3.6.1.4.1.2272.1.85.11.11.1.4 | ColumnrcKhiForwardingRofIfpForwTblType | not-accessible | current | Type of table IFP PT and IFP PCV for ROF cards |
| 1.3.6.1.4.1.2272.1.85.11.11.1.5 | ColumnrcKhiForwardingRofIfpForwIndex | not-accessible | current | Index of the IFP Rule |
| 1.3.6.1.4.1.2272.1.85.11.11.1.6 | ColumnrcKhiForwardingRofIfpForwName | read-only | current | Name of the IFP Rule |
| 1.3.6.1.4.1.2272.1.85.11.11.1.7 | ColumnrcKhiForwardingRofIfpForwStatsPorts | read-only | current | Range of Ports in slice of the slot. Display format will have Ports 0 or 1-8 /9-16/17-24 based on the card type |
| 1.3.6.1.4.1.2272.1.85.11.11.1.8 | ColumnrcKhiForwardingRofIfpForwStatsCnt | read-only | current | Counter for slice 0 |
| 1.3.6.1.4.1.2272.1.85.11.12 | TablercKhiForwardingRofZagForwStatsTable | not-accessible | current | Forwarding Zagros Forwarding Stats Key Health Indicator MIB for RoF. |
| 1.3.6.1.4.1.2272.1.85.11.12.1 | RowrcKhiForwardingRofZagForwStatsEntry | not-accessible | current | Forwarding Zagros Stats KHI - RoF. |
| 1.3.6.1.4.1.2272.1.85.11.12.1.1 | ColumnrcKhiForwardingRofZagForwStatsSlot | not-accessible | current | Slot Number |
| 1.3.6.1.4.1.2272.1.85.11.12.1.2 | ColumnrcKhiForwardingRofZagForwStatsSlice | not-accessible | current | Slice Number |
| 1.3.6.1.4.1.2272.1.85.11.12.1.3 | ColumnrcKhiForwardingRofZagForwStatsLane | not-accessible | current | Lane |
| 1.3.6.1.4.1.2272.1.85.11.12.1.4 | ColumnrcKhiForwardingRofZagForwPmmDpRxCnt | read-only | current | PMM_DP_RX_COUN |
| 1.3.6.1.4.1.2272.1.85.11.12.1.5 | ColumnrcKhiForwardingRofZagForwPmmDpTxCnt | read-only | current | PMM_DP_TX_COUNT |
| 1.3.6.1.4.1.2272.1.85.11.12.1.6 | ColumnrcKhiForwardingRofZagForwPmmRspRxCnt | read-only | current | PMM_RSP_RX_COUNT |
| 1.3.6.1.4.1.2272.1.85.11.12.1.7 | ColumnrcKhiForwardingRofZagForwPmmRspTxCnt | read-only | current | PMM_RSP_TX_COUNT |
| 1.3.6.1.4.1.2272.1.85.11.12.1.8 | ColumnrcKhiForwardingRofZagForwPmmFp0RxCnt | read-only | current | PMM_FP0_RX_COUNT |
| 1.3.6.1.4.1.2272.1.85.11.12.1.9 | ColumnrcKhiForwardingRofZagForwPmmFp0TxCnt | read-only | current | PMM_FP0_TX_COUNT |
| 1.3.6.1.4.1.2272.1.85.11.12.1.10 | ColumnrcKhiForwardingRofZagForwPmmFp1RxCnt | read-only | current | PMM_FP1_RX_COUNT |
| 1.3.6.1.4.1.2272.1.85.11.12.1.11 | ColumnrcKhiForwardingRofZagForwPmmFp1TxCnt | read-only | current | PMM_FP1_TX_COUNT |
| 1.3.6.1.4.1.2272.1.85.11.12.1.12 | ColumnrcKhiForwardingRofZagForwPmmFlopTxCnt | read-only | current | PMM_FLOP_TX_COUNT |
| 1.3.6.1.4.1.2272.1.85.11.12.1.13 | ColumnrcKhiForwardingRofZagForwPmmIngDataAdmitCnt | read-only | current | PMM_INGRESS_DATA_ADMIT_COUNT |
| 1.3.6.1.4.1.2272.1.85.11.12.1.14 | ColumnrcKhiForwardingRofZagForwPmmIngScAdmitCnt | read-only | current | PMM_INGRESS_SC_ADMIT_COUNT |
| 1.3.6.1.4.1.2272.1.85.11.12.1.15 | ColumnrcKhiForwardingRofZagForwPmmIngLsmAdmitCnt | read-only | current | PMM_INGRESS_LSM_ADMIT_COUNT |
| 1.3.6.1.4.1.2272.1.85.11.12.1.16 | ColumnrcKhiForwardingRofZagForwPmmIngCopAdmitCnt | read-only | current | PMM_INGRESS_COP_ADMIT_COUNT |
| 1.3.6.1.4.1.2272.1.85.11.12.1.17 | ColumnrcKhiForwardingRofZagForwPmmIngExpAdmitCnt | read-only | current | PMM_INGRESS_EXPAND_ADMIT_COUN |
| 1.3.6.1.4.1.2272.1.85.11.12.1.18 | ColumnrcKhiForwardingRofZagForwPmmEgrUcAdmitCnt | read-only | current | PMM_EGRESS_UC_ADMIT_COUNT |
| 1.3.6.1.4.1.2272.1.85.11.12.1.19 | ColumnrcKhiForwardingRofZagForwPmmEgrScAdmitCnt | read-only | current | PMM_EGRESS_SC_ADMIT_COUNT |
| 1.3.6.1.4.1.2272.1.85.11.12.1.20 | ColumnrcKhiForwardingRofZagForwPmmEgrMcRootAdmitCnt | read-only | current | PMM_EGRESS_MC_ROOT_ADMIT_COUNT |
| 1.3.6.1.4.1.2272.1.85.11.12.1.21 | ColumnrcKhiForwardingRofZagForwPmmEgrOobAdmitCnt | read-only | current | PMM_EGRESS_OOB_ADMIT_COUNT |
| 1.3.6.1.4.1.2272.1.85.11.12.1.22 | ColumnrcKhiForwardingRofZagForwPmmEgrExpandAdmitCnt | read-only | current | PMM_EGRESS_EXPAND_ADMIT_COUNT |
| 1.3.6.1.4.1.2272.1.85.11.12.1.23 | ColumnrcKhiForwardingRofZagForwFpRxPacketcount0 | read-only | current | FP_RX_PACKET_COUNT0 |
| 1.3.6.1.4.1.2272.1.85.11.12.1.24 | ColumnrcKhiForwardingRofZagForwFpRxPacketcount1 | read-only | current | FP_RX_PACKET_COUNT1 |
| 1.3.6.1.4.1.2272.1.85.11.12.1.25 | ColumnrcKhiForwardingRofZagForwFpTxPacketCnt0 | read-only | current | FP_TX_PACKET_COUNT0 |
| 1.3.6.1.4.1.2272.1.85.11.12.1.26 | ColumnrcKhiForwardingRofZagForwFpTxPacketCnt1 | read-only | current | FP_TX_PACKET_COUNT1 |
| 1.3.6.1.4.1.2272.1.85.11.12.1.27 | ColumnrcKhiForwardingRofZagForwHabRxPackletCnt | read-only | current | HAB_RX_PACKLET_COUNT |
| 1.3.6.1.4.1.2272.1.85.11.12.1.28 | ColumnrcKhiForwardingRofZagForwHabTxPackletCnt | read-only | current | HAB_TX_PACKLET_COUNT |
| 1.3.6.1.4.1.2272.1.85.11.12.1.29 | ColumnrcKhiForwardingRofZagForwCifRxOperationCnt | read-only | current | CIF_RX_OPERATION_COUNT |
| 1.3.6.1.4.1.2272.1.85.11.12.1.30 | ColumnrcKhiForwardingRofZagForwCifTxOperationCnt | read-only | current | CIF_TX_OPERATION_COUNT |
| 1.3.6.1.4.1.2272.1.85.11.12.1.31 | ColumnrcKhiForwardingRofZagForwZpktRxOkCnt | read-only | current | ZPKT_RX_OK_CNT |
| 1.3.6.1.4.1.2272.1.85.11.12.1.32 | ColumnrcKhiForwardingRofZagForwZpktTxOkCnt | read-only | current | ZPKT_TX_OK_CNT |
| 1.3.6.1.4.1.2272.1.85.11.12.1.33 | ColumnrcKhiForwardingRofZagForwZipTxfragDatCnt | read-only | current | ZIP_TXFRAG_DAT_CNT |
| 1.3.6.1.4.1.2272.1.85.11.12.1.34 | ColumnrcKhiForwardingRofZagForwZipTxfragRspCnt | read-only | current | ZIP_TXFRAG_RSP_CNT |
| 1.3.6.1.4.1.2272.1.85.11.12.1.35 | ColumnrcKhiForwardingRofZagForwZipTxfragPcieCnt | read-only | current | ZIP_TXFRAG_PCIE_CNT |
| 1.3.6.1.4.1.2272.1.85.11.12.1.36 | ColumnrcKhiForwardingRofZagForwZipTxfragSephCnt | read-only | current | ZIP_TXFRAG_SEPH_CNT |
| 1.3.6.1.4.1.2272.1.85.11.12.1.37 | ColumnrcKhiForwardingRofZagForwZipTxfragSeplCnt | read-only | current | ZIP_TXFRAG_SEPL_CNT |
| 1.3.6.1.4.1.2272.1.85.11.12.1.38 | ColumnrcKhiForwardingRofZagForwZipRxfragDatOkCnt | read-only | current | ZIP_RXFRAG_DAT_OK_CNT |
| 1.3.6.1.4.1.2272.1.85.11.12.1.39 | ColumnrcKhiForwardingRofZagForwZipRxfragRspOkCnt | read-only | current | ZIP_RXFRAG_RSP_OK_CNT |
| 1.3.6.1.4.1.2272.1.85.11.12.1.40 | ColumnrcKhiForwardingRofZagForwZipRxfragPcieOkCnt | read-only | current | ZIP_RXFRAG_PCIE_OK_CNT |
| 1.3.6.1.4.1.2272.1.85.11.12.1.41 | ColumnrcKhiForwardingRofZagForwZipRxfragSephOkCnt | read-only | current | ZIP_RXFRAG_SEPH_OK_CNT |
| 1.3.6.1.4.1.2272.1.85.11.12.1.42 | ColumnrcKhiForwardingRofZagForwZipRxfragSeplOkCnt | read-only | current | ZIP_RXFRAG_SEPL_OK_CNT |
| 1.3.6.1.4.1.2272.1.85.11.12.1.43 | ColumnrcKhiForwardingRofZagForwPmmRspRxTestCount | read-only | current | PMM_RSP_Rx_Test_Count |
| 1.3.6.1.4.1.2272.1.85.11.12.1.44 | ColumnrcKhiForwardingRofZagForwPmmRspTxTestCount | read-only | current | PMM_RSP_Tx_Test_Count |
| 1.3.6.1.4.1.2272.1.85.11.12.1.45 | ColumnrcKhiForwardingRofZagForwPmmDPRxTestCount | read-only | current | PMM_DP_Rx_Test_Count |
| 1.3.6.1.4.1.2272.1.85.11.12.1.46 | ColumnrcKhiForwardingRofZagForwPmmDPTxTestCount | read-only | current | PMM_DP_Tx_Test_Count |
| 1.3.6.1.4.1.2272.1.85.11.12.1.47 | ColumnrcKhiForwardingRofZagForwPmmFP0RxTestCount | read-only | current | PMM_FP0_Rx_Test_Count |
| 1.3.6.1.4.1.2272.1.85.11.12.1.48 | ColumnrcKhiForwardingRofZagForwPmmFP0TxTestCount | read-only | current | PMM_FP0_Tx_Test_Count |
| 1.3.6.1.4.1.2272.1.85.11.12.1.49 | ColumnrcKhiForwardingRofZagForwPmmFP1RxTestCount | read-only | current | PMM_FP1_Rx_Test_Count |
| 1.3.6.1.4.1.2272.1.85.11.12.1.50 | ColumnrcKhiForwardingRofZagForwPmmFP1TxTestCount | read-only | current | PMM_FP1_Tx_Test_Count |
| 1.3.6.1.4.1.2272.1.85.11.12.1.51 | ColumnrcKhiForwardingRofZagForwPmmFlopTxTestCount | read-only | current | PMM_FLOP_Tx_Test_Count |
| 1.3.6.1.4.1.2272.1.85.11.12.1.52 | ColumnrcKhiForwardingRofZagForwIhpPcCount | read-only | current | IHP_PC_Count |
| 1.3.6.1.4.1.2272.1.85.11.13 | TablercKhiForwardingRofZagDropStatsTable | not-accessible | current | Forwarding Zagros Drop Stats - 1 Instance Registers - Key Health Indicator MIB for RoF. |
| 1.3.6.1.4.1.2272.1.85.11.13.1 | RowrcKhiForwardingRofZagDropStatsEntry | not-accessible | current | Forwarding Zagros Stats KHI - RoF. |
| 1.3.6.1.4.1.2272.1.85.11.13.1.1 | ColumnrcKhiForwardingRofZagDropStatsSlot | not-accessible | current | Slot Number |
| 1.3.6.1.4.1.2272.1.85.11.13.1.2 | ColumnrcKhiForwardingRofZagDropStatsSlice | not-accessible | current | Slice Number |
| 1.3.6.1.4.1.2272.1.85.11.13.1.3 | ColumnrcKhiForwardingRofZagDropStatsLane | not-accessible | current | Lane |
| 1.3.6.1.4.1.2272.1.85.11.13.1.4 | ColumnrcKhiForwardingRofZagDropPmmRspCmdDropCnt | read-only | current | PMM_RSP_CMD_DROP_COUNT |
| 1.3.6.1.4.1.2272.1.85.11.13.1.5 | ColumnrcKhiForwardingRofZagDropPmmFabricPort0FfeDropCnt | read-only | current | PMM_FABRIC_PORT0_FFE_DROP_COUNT |
| 1.3.6.1.4.1.2272.1.85.11.13.1.6 | ColumnrcKhiForwardingRofZagDropPmmFabricPort1FfeDropCnt | read-only | current | PMM_FABRIC_PORT1_FFE_DROP_COUNT |
| 1.3.6.1.4.1.2272.1.85.11.13.1.7 | ColumnrcKhiForwardingRofZagDropPmmPmCmdDropCnt | read-only | current | PMM_PM_CMD_DROP_COUNT |
| 1.3.6.1.4.1.2272.1.85.11.13.1.8 | ColumnrcKhiForwardingRofZagDropPmmDpRxDropCnt | read-only | current | PMM_DP_RX_DRP_COUNT |
| 1.3.6.1.4.1.2272.1.85.11.13.1.9 | ColumnrcKhiForwardingRofZagDropPmmIngDataCtlDropCnt | read-only | current | PMM_INGRESS_DATA_CTL_DROP_COUNT |
| 1.3.6.1.4.1.2272.1.85.11.13.1.10 | ColumnrcKhiForwardingRofZagDropPmmIngDataPort0DropCnt | read-only | current | PMM_INGRESS_DATA_PORT0_DROP_COUNT |
| 1.3.6.1.4.1.2272.1.85.11.13.1.11 | ColumnrcKhiForwardingRofZagDropPmmIngDataPort1DropCnt | read-only | current | PMM_INGRESS_DATA_PORT1_DROP_COUNT |
| 1.3.6.1.4.1.2272.1.85.11.13.1.12 | ColumnrcKhiForwardingRofZagDropPmmIngDataPort2DropCnt | read-only | current | PMM_INGRESS_DATA_PORT2_DROP_COUNT |
| 1.3.6.1.4.1.2272.1.85.11.13.1.13 | ColumnrcKhiForwardingRofZagDropPmmIngDataPort3DropCnt | read-only | current | PMM_INGRESS_DATA_PORT3_DROP_COUNT |
| 1.3.6.1.4.1.2272.1.85.11.13.1.14 | ColumnrcKhiForwardingRofZagDropPmmIngDataPort4DropCnt | read-only | current | PMM_INGRESS_DATA_PORT4_DROP_COUNT |
| 1.3.6.1.4.1.2272.1.85.11.13.1.15 | ColumnrcKhiForwardingRofZagDropPmmIngDataPort5DropCnt | read-only | current | PMM_INGRESS_DATA_PORT5_DROP_COUNT |
| 1.3.6.1.4.1.2272.1.85.11.13.1.16 | ColumnrcKhiForwardingRofZagDropPmmIngDataPort6DropCnt | read-only | current | PMM_INGRESS_DATA_PORT6_DROP_COUNT |
| 1.3.6.1.4.1.2272.1.85.11.13.1.17 | ColumnrcKhiForwardingRofZagDropPmmIngDataPort7DropCnt | read-only | current | PMM_INGRESS_DATA_PORT7_DROP_COUNT |
| 1.3.6.1.4.1.2272.1.85.11.13.1.18 | ColumnrcKhiForwardingRofZagDropPmmIngDataPort8DropCnt | read-only | current | PMM_INGRESS_DATA_PORT8_DROP_COUNT |
| 1.3.6.1.4.1.2272.1.85.11.13.1.19 | ColumnrcKhiForwardingRofZagDropPmmIngDataPort9DropCnt | read-only | current | PMM_INGRESS_DATA_PORT9_DROP_COUNT |
| 1.3.6.1.4.1.2272.1.85.11.13.1.20 | ColumnrcKhiForwardingRofZagDropPmmIngDataPort10DropCnt | read-only | current | PMM_INGRESS_DATA_PORT10_DROP_COUNT |
| 1.3.6.1.4.1.2272.1.85.11.13.1.21 | ColumnrcKhiForwardingRofZagDropPmmIngDataPort11DropCnt | read-only | current | PMM_INGRESS_DATA_PORT11_DROP_COUN |
| 1.3.6.1.4.1.2272.1.85.11.13.1.22 | ColumnrcKhiForwardingRofZagDropPmmIngDataPort12DropCnt | read-only | current | PMM_INGRESS_DATA_PORT12_DROP_COUNT |
| 1.3.6.1.4.1.2272.1.85.11.13.1.23 | ColumnrcKhiForwardingRofZagDropPmmIngDataPort13DropCnt | read-only | current | PMM_INGRESS_DATA_PORT13_DROP_COUNT |
| 1.3.6.1.4.1.2272.1.85.11.13.1.24 | ColumnrcKhiForwardingRofZagDropPmmIngDataPort14DropCnt | read-only | current | PMM_INGRESS_DATA_PORT14_DROP_COUNT |
| 1.3.6.1.4.1.2272.1.85.11.13.1.25 | ColumnrcKhiForwardingRofZagDropPmmIngDataPort15DropCnt | read-only | current | PMM_INGRESS_DATA_PORT15_DROP_COUNT |
| 1.3.6.1.4.1.2272.1.85.11.13.1.26 | ColumnrcKhiForwardingRofZagDropPmmIngCopDropCnt | read-only | current | PMM_INGRESS_COP_DROP_COUN |
| 1.3.6.1.4.1.2272.1.85.11.13.1.27 | ColumnrcKhiForwardingRofZagDropPmmIngExpandDropCnt | read-only | current | PMM_INGRESS_EXPAND_DROP_COUNT |
| 1.3.6.1.4.1.2272.1.85.11.13.1.28 | ColumnrcKhiForwardingRofZagDropPmmEgrUcDropCnt | read-only | current | PMM_EGRESS_UC_DROP_COUNT |
| 1.3.6.1.4.1.2272.1.85.11.13.1.29 | ColumnrcKhiForwardingRofZagDropPmmEgrScDropCnt | read-only | current | PMM_EGRESS_SC_DROP_COUNT |
| 1.3.6.1.4.1.2272.1.85.11.13.1.30 | ColumnrcKhiForwardingRofZagDropPmmEgrMcRootT0DropCnt | read-only | current | PMM_EGRESS_MC_ROOT_T0_DROP_COUNT |
| 1.3.6.1.4.1.2272.1.85.11.13.1.31 | ColumnrcKhiForwardingRofZagDropPmmEgrMcRootT1DropCnt | read-only | current | PMM_EGRESS_MC_ROOT_T1_DROP_COUNT |
| 1.3.6.1.4.1.2272.1.85.11.13.1.32 | ColumnrcKhiForwardingRofZagDropPmmEgrMcRootT2DropCnt | read-only | current | PMM_EGRESS_MC_ROOT_T2_DROP_COUNT |
| 1.3.6.1.4.1.2272.1.85.11.13.1.33 | ColumnrcKhiForwardingRofZagDropPmmEgrMcRootT3DropCnt | read-only | current | PMM_EGRESS_MC_ROOT_T3_DROP_COUN |
| 1.3.6.1.4.1.2272.1.85.11.13.1.34 | ColumnrcKhiForwardingRofZagDropPmmEgrMcRootT4DropCnt | read-only | current | PMM_EGRESS_MC_ROOT_T4_DROP_COUNT |
| 1.3.6.1.4.1.2272.1.85.11.13.1.35 | ColumnrcKhiForwardingRofZagDropPmmEgrMcRootT5DropCnt | read-only | current | PMM_EGRESS_MC_ROOT_T5_DROP_COUNT |
| 1.3.6.1.4.1.2272.1.85.11.13.1.36 | ColumnrcKhiForwardingRofZagDropPmmEgrMcRootT6DropCnt | read-only | current | PMM_EGRESS_MC_ROOT_T6_DROP_COUNT |
| 1.3.6.1.4.1.2272.1.85.11.13.1.37 | ColumnrcKhiForwardingRofZagDropPmmEgrMcRootT7DropCnt | read-only | current | PMM_EGRESS_MC_ROOT_T7_DROP_COUNT |
| 1.3.6.1.4.1.2272.1.85.11.13.1.38 | ColumnrcKhiForwardingRofZagDropPmmEgrOobDropCnt | read-only | current | PMM_EGRESS_OOB_DROP_COUNT |
| 1.3.6.1.4.1.2272.1.85.11.13.1.39 | ColumnrcKhiForwardingRofZagDropPmmEgrExpandDropCnt | read-only | current | PMM_EGRESS_EXPAND_DROP_COUNT |
| 1.3.6.1.4.1.2272.1.85.11.13.1.40 | ColumnrcKhiForwardingRofZagDropPmmMpvMpidDropCnt | read-only | current | PMM_MPV_MPID_DROP_COUN |
| 1.3.6.1.4.1.2272.1.85.11.13.1.41 | ColumnrcKhiForwardingRofZagDropZfaInvalidGpidDropCnt | read-only | current | ZFA_INVALID_GPID_DROP_COUNT |
| 1.3.6.1.4.1.2272.1.85.11.13.1.42 | ColumnrcKhiForwardingRofZagDropCifRxOperErrCnt | read-only | current | CIF_RX_OPERATION_ERROR_COUNT |
| 1.3.6.1.4.1.2272.1.85.11.13.1.43 | ColumnrcKhiForwardingRofZagDropEhpStgDropCnt | read-only | current | EHP_STG_DROP_COUNT |
| 1.3.6.1.4.1.2272.1.85.11.13.1.44 | ColumnrcKhiForwardingRofZagDropEhpNoRcvrDropCnt | read-only | current | EHP_NO_RCVR_DROP_COUNT |
| 1.3.6.1.4.1.2272.1.85.11.13.1.45 | ColumnrcKhiForwardingRofZagDropHcfcRxErrCnt | read-only | current | HCFC_RX_ERR_CNT |
| 1.3.6.1.4.1.2272.1.85.11.13.1.46 | ColumnrcKhiForwardingRofZagDropZipRxfragDatErrCnt | read-only | current | ZIP_RXFRAG_DAT_ERR_CNT |
| 1.3.6.1.4.1.2272.1.85.11.13.1.47 | ColumnrcKhiForwardingRofZagDropZiPRxfragRspErrCnt | read-only | current | ZIP_RXFRAG_RSP_ERR_CNT |
| 1.3.6.1.4.1.2272.1.85.11.13.1.48 | ColumnrcKhiForwardingRofZagDropZipRxfragPcieErrCnt | read-only | current | ZIP_RXFRAG_PCIE_ERR_CNT |
| 1.3.6.1.4.1.2272.1.85.11.13.1.49 | ColumnrcKhiForwardingRofZagDropZipRxfragSephErrCnt | read-only | current | ZIP_RXFRAG_SEPH_ERR_CNT |
| 1.3.6.1.4.1.2272.1.85.11.13.1.50 | ColumnrcKhiForwardingRofZagDropZipRxfragSeplErrCnt | read-only | current | ZIP_RXFRAG_SEPL_ERR_CN |
| 1.3.6.1.4.1.2272.1.85.11.13.1.51 | ColumnrcKhiForwardingRofZagDropZipRxfragDropCnt | read-only | current | ZIP_RXFRAG_DROP_CNT |
| 1.3.6.1.4.1.2272.1.85.11.13.1.52 | ColumnrcKhiForwardingRofZagDropZipRxfragInvctlCnt | read-only | current | ZIP_RXFRAG_INVCTL_CN |
| 1.3.6.1.4.1.2272.1.85.11.13.1.53 | ColumnrcKhiForwardingRofZagDropZpktRxErrCnt | read-only | current | ZPKT_RX_ERR_CNT |
| 1.3.6.1.4.1.2272.1.85.11.13.1.54 | ColumnrcKhiForwardingRofZagDropZpktTxErrCnt | read-only | current | ZPKT_TX_ERR_CNT |
| 1.3.6.1.4.1.2272.1.85.11.14 | TablercKhiForwardingRofZagDropExtendedStatsTable | not-accessible | current | Forwarding Zagros Drop Stats - Multiple Instance Registers - Key Health Indicator MIB for RoF. |
| 1.3.6.1.4.1.2272.1.85.11.14.1 | RowrcKhiForwardingRofZagDropExtendedStatsEntry | not-accessible | current | Forwarding Zagros Drop Extended Stats KHI - RoF. |
| 1.3.6.1.4.1.2272.1.85.11.14.1.1 | ColumnrcKhiForwardingRofZagDropExtendedStatsSlot | not-accessible | current | Slot Number |
| 1.3.6.1.4.1.2272.1.85.11.14.1.2 | ColumnrcKhiForwardingRofZagDropExtendedStatsSlice | not-accessible | current | Slice Number |
| 1.3.6.1.4.1.2272.1.85.11.14.1.3 | ColumnrcKhiForwardingRofZagDropExtendedStatsLane | not-accessible | current | Lane |
| 1.3.6.1.4.1.2272.1.85.11.14.1.4 | ColumnrcKhiForwardingRofZagDropExtendedFpRxPacketErrCnt0 | read-only | current | FP_RX_PACKET_ERROR_COUNT0 |
| 1.3.6.1.4.1.2272.1.85.11.14.1.5 | ColumnrcKhiForwardingRofZagDropExtendedFpRxPacketErrCnt1 | read-only | current | FP_RX_PACKET_ERROR_COUNT1 |
| 1.3.6.1.4.1.2272.1.85.11.14.1.6 | ColumnrcKhiForwardingRofZagDropExtendedFpTxPacketErrCnt0 | read-only | current | FP_TX_PACKET_ERROR_COUNT0 |
| 1.3.6.1.4.1.2272.1.85.11.14.1.7 | ColumnrcKhiForwardingRofZagDropExtendedFpTxPacketErrCnt1 | read-only | current | FP_TX_PACKET_ERROR_COUNT1 |
| 1.3.6.1.4.1.2272.1.85.11.14.1.8 | ColumnrcKhiForwardingRofZagDropExtendedFpRxJunkErrCnt0 | read-only | current | FP_RX_JUNK_ERROR_COUNT0 |
| 1.3.6.1.4.1.2272.1.85.11.14.1.9 | ColumnrcKhiForwardingRofZagDropExtendedFpRxJunkErrCnt1 | read-only | current | FP_RX_JUNK_ERROR_COUNT1 |
| 1.3.6.1.4.1.2272.1.85.11.14.1.10 | ColumnrcKhiForwardingRofZagDropExtendedPmmMpvSkoDropCnt0 | read-only | current | PMM_MPV_SKO_DROP_COUNT0 |
| 1.3.6.1.4.1.2272.1.85.11.14.1.11 | ColumnrcKhiForwardingRofZagDropExtendedPmmMpvSkoDropCnt1 | read-only | current | PMM_MPV_SKO_DROP_COUNT1 |
| 1.3.6.1.4.1.2272.1.85.11.14.1.12 | ColumnrcKhiForwardingRofZagDropExtendedPmmMpvSkoDropCnt2 | read-only | current | PMM_MPV_SKO_DROP_COUNT2 |
| 1.3.6.1.4.1.2272.1.85.11.14.1.13 | ColumnrcKhiForwardingRofZagDropExtendedPmmMpvSkoDropCnt3 | read-only | current | PMM_MPV_SKO_DROP_COUNT3 |
| 1.3.6.1.4.1.2272.1.85.11.14.1.14 | ColumnrcKhiForwardingRofZagDropExtendedPmmMpvSkoDropCnt4 | read-only | current | PMM_MPV_SKO_DROP_COUNT4 |
| 1.3.6.1.4.1.2272.1.85.11.14.1.15 | ColumnrcKhiForwardingRofZagDropExtendedPmmMpvSkoDropCnt5 | read-only | current | PMM_MPV_SKO_DROP_COUNT5 |
| 1.3.6.1.4.1.2272.1.85.11.14.1.16 | ColumnrcKhiForwardingRofZagDropExtendedPmmMpvSkoDropCnt6 | read-only | current | PMM_MPV_SKO_DROP_COUNT6 |
| 1.3.6.1.4.1.2272.1.85.11.14.1.17 | ColumnrcKhiForwardingRofZagDropExtendedPmmMpvSkoDropCnt7 | read-only | current | PMM_MPV_SKO_DROP_COUNT7 |
| 1.3.6.1.4.1.2272.1.85.11.14.1.18 | ColumnrcKhiForwardingRofZagDropExtendedPmmMpvMltDropCnt0 | read-only | current | PMM_MPV_MLT_DROP_COUNT0 |
| 1.3.6.1.4.1.2272.1.85.11.14.1.19 | ColumnrcKhiForwardingRofZagDropExtendedPmmMpvMltDropCnt1 | read-only | current | PMM_MPV_MLT_DROP_COUNT1 |
| 1.3.6.1.4.1.2272.1.85.11.14.1.20 | ColumnrcKhiForwardingRofZagDropExtendedPmmMpvMltDropCnt2 | read-only | current | PMM_MPV_MLT_DROP_COUNT2 |
| 1.3.6.1.4.1.2272.1.85.11.14.1.21 | ColumnrcKhiForwardingRofZagDropExtendedPmmMpvMltDropCnt3 | read-only | current | PMM_MPV_MLT_DROP_COUNT3 |
| 1.3.6.1.4.1.2272.1.85.11.14.1.22 | ColumnrcKhiForwardingRofZagDropExtendedPmmMpvMltDropCnt4 | read-only | current | PMM_MPV_MLT_DROP_COUNT4 |
| 1.3.6.1.4.1.2272.1.85.11.14.1.23 | ColumnrcKhiForwardingRofZagDropExtendedPmmMpvMltDropCnt5 | read-only | current | PMM_MPV_MLT_DROP_COUNT5 |
| 1.3.6.1.4.1.2272.1.85.11.14.1.24 | ColumnrcKhiForwardingRofZagDropExtendedPmmMpvMltDropCnt6 | read-only | current | PMM_MPV_MLT_DROP_COUNT6 |
| 1.3.6.1.4.1.2272.1.85.11.14.1.25 | ColumnrcKhiForwardingRofZagDropExtendedPmmMpvMltDropCnt7 | read-only | current | PMM_MPV_MLT_DROP_COUNT7 |
| 1.3.6.1.4.1.2272.1.85.11.14.1.26 | ColumnrcKhiForwardingRofZagDropExtendedPmmMpvFfeDropCnt0 | read-only | current | PMM_MPV_FFE_DROP_COUNT0 |
| 1.3.6.1.4.1.2272.1.85.11.14.1.27 | ColumnrcKhiForwardingRofZagDropExtendedPmmMpvFfeDropCnt1 | read-only | current | PMM_MPV_FFE_DROP_COUNT1 |
| 1.3.6.1.4.1.2272.1.85.11.14.1.28 | ColumnrcKhiForwardingRofZagDropExtendedPmmMpvFfeDropCnt2 | read-only | current | PMM_MPV_FFE_DROP_COUNT2 |
| 1.3.6.1.4.1.2272.1.85.11.14.1.29 | ColumnrcKhiForwardingRofZagDropExtendedPmmMpvFfeDropCnt3 | read-only | current | PMM_MPV_FFE_DROP_COUNT3 |
| 1.3.6.1.4.1.2272.1.85.11.14.1.30 | ColumnrcKhiForwardingRofZagDropExtendedPmmMpvFfeDropCnt4 | read-only | current | PMM_MPV_FFE_DROP_COUNT4 |
| 1.3.6.1.4.1.2272.1.85.11.14.1.31 | ColumnrcKhiForwardingRofZagDropExtendedPmmMpvFfeDropCnt5 | read-only | current | PMM_MPV_FFE_DROP_COUNT5 |
| 1.3.6.1.4.1.2272.1.85.11.14.1.32 | ColumnrcKhiForwardingRofZagDropExtendedPmmMpvFfeDropCnt6 | read-only | current | PMM_MPV_FFE_DROP_COUNT6 |
| 1.3.6.1.4.1.2272.1.85.11.14.1.33 | ColumnrcKhiForwardingRofZagDropExtendedPmmMpvFfeDropCnt7 | read-only | current | PMM_MPV_FFE_DROP_COUNT7 |
| 1.3.6.1.4.1.2272.1.85.11.14.1.34 | ColumnrcKhiForwardingRofZagDropExtendedPmmMpvStgDropCnt0 | read-only | current | PMM_MPV_FFE_DROP_COUNT0 |
| 1.3.6.1.4.1.2272.1.85.11.14.1.35 | ColumnrcKhiForwardingRofZagDropExtendedPmmMpvStgDropCnt1 | read-only | current | PMM_MPV_FFE_DROP_COUNT1 |
| 1.3.6.1.4.1.2272.1.85.11.14.1.36 | ColumnrcKhiForwardingRofZagDropExtendedPmmMpvStgDropCnt2 | read-only | current | PMM_MPV_FFE_DROP_COUNT2 |
| 1.3.6.1.4.1.2272.1.85.11.14.1.37 | ColumnrcKhiForwardingRofZagDropExtendedPmmMpvStgDropCnt3 | read-only | current | PMM_MPV_FFE_DROP_COUNT3 |
| 1.3.6.1.4.1.2272.1.85.11.14.1.38 | ColumnrcKhiForwardingRofZagDropExtendedPmmMpvStgDropCnt4 | read-only | current | PMM_MPV_FFE_DROP_COUNT4 |
| 1.3.6.1.4.1.2272.1.85.11.14.1.39 | ColumnrcKhiForwardingRofZagDropExtendedPmmMpvStgDropCnt5 | read-only | current | PMM_MPV_FFE_DROP_COUNT5 |
| 1.3.6.1.4.1.2272.1.85.11.14.1.40 | ColumnrcKhiForwardingRofZagDropExtendedPmmMpvStgDropCnt6 | read-only | current | PMM_MPV_FFE_DROP_COUNT6 |
| 1.3.6.1.4.1.2272.1.85.11.14.1.41 | ColumnrcKhiForwardingRofZagDropExtendedPmmMpvStgDropCnt7 | read-only | current | PMM_MPV_FFE_DROP_COUNT7 |
| 1.3.6.1.4.1.2272.1.85.11.14.1.42 | ColumnrcKhiForwardingRofZagDropExtendedTxbDropCnt0 | read-only | current | TXB_DROP_CNT0 |
| 1.3.6.1.4.1.2272.1.85.11.14.1.43 | ColumnrcKhiForwardingRofZagDropExtendedTxbDropCnt1 | read-only | current | TXB_DROP_CNT1 |
| 1.3.6.1.4.1.2272.1.85.11.14.1.44 | ColumnrcKhiForwardingRofZagDropExtendedTxbDropCnt2 | read-only | current | TXB_DROP_CNT2 |
| 1.3.6.1.4.1.2272.1.85.11.14.1.45 | ColumnrcKhiForwardingRofZagDropExtendedTxbDropCnt3 | read-only | current | TXB_DROP_CNT3 |
| 1.3.6.1.4.1.2272.1.85.11.14.1.46 | ColumnrcKhiForwardingRofZagDropExtendedTxbDropCnt4 | read-only | current | TXB_DROP_CNT4 |
| 1.3.6.1.4.1.2272.1.85.11.14.1.47 | ColumnrcKhiForwardingRofZagDropExtendedTxbDropCnt5 | read-only | current | TXB_DROP_CNT5 |
| 1.3.6.1.4.1.2272.1.85.11.14.1.48 | ColumnrcKhiForwardingRofZagDropExtendedTxbDropCnt6 | read-only | current | TXB_DROP_CNT6 |
| 1.3.6.1.4.1.2272.1.85.11.14.1.49 | ColumnrcKhiForwardingRofZagDropExtendedTxbDropCnt7 | read-only | current | TXB_DROP_CNT7 |
| 1.3.6.1.4.1.2272.1.85.11.14.1.50 | ColumnrcKhiForwardingRofZagDropExtendedTxbDiscardCnt0 | read-only | current | TXB_DISCARD_COUNT0 |
| 1.3.6.1.4.1.2272.1.85.11.14.1.51 | ColumnrcKhiForwardingRofZagDropExtendedTxbDiscardCnt1 | read-only | current | TXB_DISCARD_COUNT1 |
| 1.3.6.1.4.1.2272.1.85.11.14.1.52 | ColumnrcKhiForwardingRofZagDropExtendedTxbDiscardCnt2 | read-only | current | TXB_DISCARD_COUNT2 |
| 1.3.6.1.4.1.2272.1.85.11.14.1.53 | ColumnrcKhiForwardingRofZagDropExtendedTxbDiscardCnt3 | read-only | current | TXB_DISCARD_COUNT3 |
| 1.3.6.1.4.1.2272.1.85.11.14.1.54 | ColumnrcKhiForwardingRofZagDropExtendedTxbDiscardCnt4 | read-only | current | TXB_DISCARD_COUNT4 |
| 1.3.6.1.4.1.2272.1.85.11.14.1.55 | ColumnrcKhiForwardingRofZagDropExtendedTxbDiscardCnt5 | read-only | current | TXB_DISCARD_COUNT5 |
| 1.3.6.1.4.1.2272.1.85.11.14.1.56 | ColumnrcKhiForwardingRofZagDropExtendedTxbDiscardCnt6 | read-only | current | TXB_DISCARD_COUNT6 |
| 1.3.6.1.4.1.2272.1.85.11.14.1.57 | ColumnrcKhiForwardingRofZagDropExtendedTxbDiscardCnt7 | read-only | current | TXB_DISCARD_COUNT7 |
| 1.3.6.1.4.1.2272.1.85.11.15 | TablercKhiForwardingRofZagStatusTable | not-accessible | current | Forwarding Zagros Status Key Health Indicator MIB for RoF. |
| 1.3.6.1.4.1.2272.1.85.11.15.1 | RowrcKhiForwardingRofZagStatusEntry | not-accessible | current | Forwarding Zagros Status KHI - RoF. |
| 1.3.6.1.4.1.2272.1.85.11.15.1.1 | ColumnrcKhiForwardingRofZagStatusSlot | not-accessible | current | Slot Number |
| 1.3.6.1.4.1.2272.1.85.11.15.1.2 | ColumnrcKhiForwardingRofZagStatusSlice | not-accessible | current | Slice Number |
| 1.3.6.1.4.1.2272.1.85.11.15.1.3 | ColumnrcKhiForwardingRofZagStatusLane | not-accessible | current | Lane |
| 1.3.6.1.4.1.2272.1.85.11.15.1.4 | ColumnrcKhiForwardingRofZagZag2DeviceIdBuild | read-only | current | ZAG2_DEVICE_ID_BUILD |
| 1.3.6.1.4.1.2272.1.85.11.15.1.5 | ColumnrcKhiForwardingRofZagZag2Build | read-only | current | ZAG2_BUILD |
| 1.3.6.1.4.1.2272.1.85.11.15.1.6 | ColumnrcKhiForwardingRofZagZag2Status | read-only | current | ZAG2_STATUS |
| 1.3.6.1.4.1.2272.1.85.11.15.1.7 | ColumnrcKhiForwardingRofZagZag2Interrupt | read-only | current | ZAG2_INTERRUPT |
| 1.3.6.1.4.1.2272.1.85.11.15.1.8 | ColumnrcKhiForwardingRofZagZipStatus | read-only | current | ZIP_STATUS |
| 1.3.6.1.4.1.2272.1.85.11.15.1.9 | ColumnrcKhiForwardingRofZagZipSbmStatus | read-only | current | ZIP_SBM_STATUS |
| 1.3.6.1.4.1.2272.1.85.11.15.1.10 | ColumnrcKhiForwardingRofZagCifStatus | read-only | current | CIF_STATUS |
| 1.3.6.1.4.1.2272.1.85.11.15.1.11 | ColumnrcKhiForwardingRofZagDpStatus0 | read-only | current | DP_STATUS0 |
| 1.3.6.1.4.1.2272.1.85.11.15.1.12 | ColumnrcKhiForwardingRofZagDpStatus1 | read-only | current | DP_STATUS1 |
| 1.3.6.1.4.1.2272.1.85.11.15.1.13 | ColumnrcKhiForwardingRofZagDpStatus2 | read-only | current | DP_STATUS2 |
| 1.3.6.1.4.1.2272.1.85.11.15.1.14 | ColumnrcKhiForwardingRofZagDpStatus3 | read-only | current | DP_STATUS3 |
| 1.3.6.1.4.1.2272.1.85.11.15.1.15 | ColumnrcKhiForwardingRofZagDpStatus4 | read-only | current | DP_STATUS4 |
| 1.3.6.1.4.1.2272.1.85.11.15.1.16 | ColumnrcKhiForwardingRofZagDpStatus5 | read-only | current | DP_STATUS5 |
| 1.3.6.1.4.1.2272.1.85.11.15.1.17 | ColumnrcKhiForwardingRofZagDpStatus6 | read-only | current | DP_STATUS6 |
| 1.3.6.1.4.1.2272.1.85.11.15.1.18 | ColumnrcKhiForwardingRofZagDpStatus7 | read-only | current | DP_STATUS7 |
| 1.3.6.1.4.1.2272.1.85.11.15.1.19 | ColumnrcKhiForwardingRofZagDpInterrupt0 | read-only | current | DP_INTERRUPT0 |
| 1.3.6.1.4.1.2272.1.85.11.15.1.20 | ColumnrcKhiForwardingRofZagDpInterrupt1 | read-only | current | DP_INTERRUPT1 |
| 1.3.6.1.4.1.2272.1.85.11.15.1.21 | ColumnrcKhiForwardingRofZagDpInterrupt2 | read-only | current | DP_INTERRUPT2 |
| 1.3.6.1.4.1.2272.1.85.11.15.1.22 | ColumnrcKhiForwardingRofZagDpInterrupt3 | read-only | current | DP_INTERRUPT3 |
| 1.3.6.1.4.1.2272.1.85.11.15.1.23 | ColumnrcKhiForwardingRofZagDpInterrupt4 | read-only | current | DP_INTERRUPT4 |
| 1.3.6.1.4.1.2272.1.85.11.15.1.24 | ColumnrcKhiForwardingRofZagDpInterrupt5 | read-only | current | DP_INTERRUPT5 |
| 1.3.6.1.4.1.2272.1.85.11.15.1.25 | ColumnrcKhiForwardingRofZagDpInterrupt6 | read-only | current | DP_INTERRUPT6 |
| 1.3.6.1.4.1.2272.1.85.11.15.1.26 | ColumnrcKhiForwardingRofZagDpInterrupt7 | read-only | current | DP_INTERRUPT7 |
| 1.3.6.1.4.1.2272.1.85.11.15.1.27 | ColumnrcKhiForwardingRofZagFpStatus0 | read-only | current | FP_STATUS0 |
| 1.3.6.1.4.1.2272.1.85.11.15.1.28 | ColumnrcKhiForwardingRofZagFpStatus1 | read-only | current | FP_STATUS1 |
| 1.3.6.1.4.1.2272.1.85.11.15.1.29 | ColumnrcKhiForwardingRofZagHabStatus | read-only | current | HAB_STATUS |
| 1.3.6.1.4.1.2272.1.85.11.15.1.30 | ColumnrcKhiForwardingRofZagPmmInterrupt | read-only | current | PMM_INTERRUPT |
| 1.3.6.1.4.1.2272.1.85.11.15.1.31 | ColumnrcKhiForwardingRofZagPmmIngDataPageCnt | read-only | current | PMM_INGRESS_DATA_PAGE_COUNT |
| 1.3.6.1.4.1.2272.1.85.11.15.1.32 | ColumnrcKhiForwardingRofZagPmmIngDataPeakPageCnt | read-only | current | PMM_INGRESS_DATA_PEAK_PAGE_COUNT |
| 1.3.6.1.4.1.2272.1.85.11.15.1.33 | ColumnrcKhiForwardingRofZagPmmIngScPageCnt | read-only | current | PMM_INGRESS_SC_PAGE_COUNT |
| 1.3.6.1.4.1.2272.1.85.11.15.1.34 | ColumnrcKhiForwardingRofZagPmmIngScOrdinaryLmt | read-only | current | PMM_INGRESS_SC_ORDINARY_LIMIT |
| 1.3.6.1.4.1.2272.1.85.11.15.1.35 | ColumnrcKhiForwardingRofZagPmmIngScMaxLmt | read-only | current | PMM_INGRESS_SC_MAX_LIMIT |
| 1.3.6.1.4.1.2272.1.85.11.15.1.36 | ColumnrcKhiForwardingRofZagPmmIngLsmPageCnt | read-only | current | PMM_INGRESS_LSM_PAGE_COUNT |
| 1.3.6.1.4.1.2272.1.85.11.15.1.37 | ColumnrcKhiForwardingRofZagPmmIngLsmMaxLmt | read-only | current | PMM_INGRESS_LSM_MAX_LIMIT |
| 1.3.6.1.4.1.2272.1.85.11.15.1.38 | ColumnrcKhiForwardingRofZagPmmIngCopPageCnt | read-only | current | PMM_INGRESS_COP_PAGE_COUNT |
| 1.3.6.1.4.1.2272.1.85.11.15.1.39 | ColumnrcKhiForwardingRofZagPmmIngCopMaxLmt | read-only | current | PMM_INGRESS_COP_MAX_LIMIT |
| 1.3.6.1.4.1.2272.1.85.11.15.1.40 | ColumnrcKhiForwardingRofZagPmmIngExpandPageCnt | read-only | current | PMM_INGRESS_EXPAND_PAGE_COUNT |
| 1.3.6.1.4.1.2272.1.85.11.15.1.41 | ColumnrcKhiForwardingRofZagPmmIngExpandMaxLmt | read-only | current | PMM_INGRESS_EXPAND_MAX_LIMIT |
| 1.3.6.1.4.1.2272.1.85.11.15.1.42 | ColumnrcKhiForwardingRofZagPmmEgrUcPageCnt | read-only | current | PMM_EGRESS_UC_PAGE_COUNT |
| 1.3.6.1.4.1.2272.1.85.11.15.1.43 | ColumnrcKhiForwardingRofZagPmmEgrUcPeakPageCnt | read-only | current | PMM_EGRESS_UC_PEAK_PAGE_COUNT |
| 1.3.6.1.4.1.2272.1.85.11.15.1.44 | ColumnrcKhiForwardingRofZagPmmEgrUcMaxLmt | read-only | current | PMM_EGRESS_UC_MAX_LIMIT |
| 1.3.6.1.4.1.2272.1.85.11.15.1.45 | ColumnrcKhiForwardingRofZagPmmEgrScPageCnt | read-only | current | PMM_EGRESS_SC_PAGE_COUNT |
| 1.3.6.1.4.1.2272.1.85.11.15.1.46 | ColumnrcKhiForwardingRofZagPmmEgrScMaxLmt | read-only | current | PMM_EGRESS_SC_MAX_LIMIT |
| 1.3.6.1.4.1.2272.1.85.11.15.1.47 | ColumnrcKhiForwardingRofZagPmmEgrMcPageCnt | read-only | current | PMM_EGRESS_MC_PAGE_COUNT |
| 1.3.6.1.4.1.2272.1.85.11.15.1.48 | ColumnrcKhiForwardingRofZagPmmEgrMcPeakPageCnt | read-only | current | PMM_EGRESS_MC_PEAK_PAGE_COUNT |
| 1.3.6.1.4.1.2272.1.85.11.15.1.49 | ColumnrcKhiForwardingRofZagPmmEgrMcMpvRootLmt | read-only | current | PMM_EGRESS_MC_MPV_ROOT_LIMIT |
| 1.3.6.1.4.1.2272.1.85.11.15.1.50 | ColumnrcKhiForwardingRofZagPmmEgrMcMaxLmt | read-only | current | PMM_EGRESS_MC_MAX_LIMIT |
| 1.3.6.1.4.1.2272.1.85.11.15.1.51 | ColumnrcKhiForwardingRofZagPmmEgrOobPageCnt | read-only | current | PMM_EGRESS_OOB_PAGE_COUNT |
| 1.3.6.1.4.1.2272.1.85.11.15.1.52 | ColumnrcKhiForwardingRofZagPmmEgrOobMaxLmt | read-only | current | PMM_EGRESS_OOB_MAX_LIMIT |
| 1.3.6.1.4.1.2272.1.85.11.15.1.53 | ColumnrcKhiForwardingRofZagPmmEgrExpandPageCnt | read-only | current | PMM_EGRESS_EXPAND_PAGE_COUNT |
| 1.3.6.1.4.1.2272.1.85.11.15.1.54 | ColumnrcKhiForwardingRofZagPmmEgrExpandMaxLmt | read-only | current | PMM_EGRESS_EXPAND_MAX_LIMIT |
| 1.3.6.1.4.1.2272.1.85.11.15.1.55 | ColumnrcKhiForwardingRofZagIdpStatus0 | read-only | current | IDP_STATUS_0 |
| 1.3.6.1.4.1.2272.1.85.11.15.1.56 | ColumnrcKhiForwardingRofZagIdpStatus1 | read-only | current | IDP_STATUS_1 |
| 1.3.6.1.4.1.2272.1.85.11.15.1.57 | ColumnrcKhiForwardingRofZagEhpStatus | read-only | current | EHP_STATUS |
| 1.3.6.1.4.1.2272.1.85.11.15.1.58 | ColumnrcKhiForwardingRofZagEhpFifoStatus | read-only | current | EHP_FIFO_STATUS |
| 1.3.6.1.4.1.2272.1.85.11.15.1.59 | ColumnrcKhiForwardingRofZagIhpCtlReg0 | read-only | current | IHP_CTL_REG0 |
| 1.3.6.1.4.1.2272.1.85.11.15.1.60 | ColumnrcKhiForwardingRofZagIhpStatReg0 | read-only | current | IHP_STAT_REG0 |
| 1.3.6.1.4.1.2272.1.85.11.15.1.61 | ColumnrcKhiForwardingRofZagIhpStatus1 | read-only | current | IHP_STATUS_1 |
| 1.3.6.1.4.1.2272.1.85.11.15.1.62 | ColumnrcKhiForwardingRofZagIhpCtlReg1 | read-only | current | IHP_CTL_REG1 |
| 1.3.6.1.4.1.2272.1.85.11.15.1.63 | ColumnrcKhiForwardingRofZagIhpGenCfgReg | read-only | current | IHP_GEN_CFG_REG |
| 1.3.6.1.4.1.2272.1.85.11.15.1.64 | ColumnrcKhiForwardingRofZagZfaFifoStatusReg | read-only | current | ZFA_FIFO_STATUS_REG |
| 1.3.6.1.4.1.2272.1.85.11.15.1.65 | ColumnrcKhiForwardingRofZagHbmEvents | read-only | current | HBM_EVENTS |
| 1.3.6.1.4.1.2272.1.85.11.15.1.66 | ColumnrcKhiForwardingRofZagHbmCreditCnt | read-only | current | HBM_CREDIT_COUNTER |
| 1.3.6.1.4.1.2272.1.85.11.15.1.67 | ColumnrcKhiForwardingRofZagLsmLinkState | read-only | current | LSM_LINK_STATE |
| 1.3.6.1.4.1.2272.1.85.11.15.1.68 | ColumnrcKhiForwardingRofZagLsmHwLinkState | read-only | current | LSM_HW_LINK_STATE |
| 1.3.6.1.4.1.2272.1.85.11.15.1.69 | ColumnrcKhiForwardingRofZagTxbDebug0 | read-only | current | TXB_DEBUG0 |
| 1.3.6.1.4.1.2272.1.85.11.15.1.70 | ColumnrcKhiForwardingRofZagTxbDebug1 | read-only | current | TXB_DEBUG1 |
| 1.3.6.1.4.1.2272.1.85.11.15.1.71 | ColumnrcKhiForwardingRofZagTxbDebug2 | read-only | current | TXB_DEBUG2 |
| 1.3.6.1.4.1.2272.1.85.11.15.1.72 | ColumnrcKhiForwardingRofZagTxbDebug3 | read-only | current | TXB_DEBUG3 |
| 1.3.6.1.4.1.2272.1.85.11.15.1.73 | ColumnrcKhiForwardingRofZagTxbEvent | read-only | current | TXB_EVENT |
| 1.3.6.1.4.1.2272.1.85.11.15.1.74 | ColumnrcKhiForwardingRofZagTxbUcfifoFull | read-only | current | TXB_UC_FIFO_FULL |
| 1.3.6.1.4.1.2272.1.85.11.15.1.75 | ColumnrcKhiForwardingRofZagDpExtStatus0 | read-only | current | DP_INTERRUPT0 |
| 1.3.6.1.4.1.2272.1.85.11.15.1.76 | ColumnrcKhiForwardingRofZagDpExtStatus1 | read-only | current | DP_INTERRUPT1 |
| 1.3.6.1.4.1.2272.1.85.11.15.1.77 | ColumnrcKhiForwardingRofZagDpExtStatus2 | read-only | current | DP_INTERRUPT2 |
| 1.3.6.1.4.1.2272.1.85.11.15.1.78 | ColumnrcKhiForwardingRofZagDpExtStatus3 | read-only | current | DP_INTERRUPT3 |
| 1.3.6.1.4.1.2272.1.85.11.15.1.79 | ColumnrcKhiForwardingRofZagDpExtStatus4 | read-only | current | DP_INTERRUPT4 |
| 1.3.6.1.4.1.2272.1.85.11.15.1.80 | ColumnrcKhiForwardingRofZagDpExtStatus5 | read-only | current | DP_INTERRUPT5 |
| 1.3.6.1.4.1.2272.1.85.11.15.1.81 | ColumnrcKhiForwardingRofZagDpExtStatus6 | read-only | current | DP_INTERRUPT6 |
| 1.3.6.1.4.1.2272.1.85.11.15.1.82 | ColumnrcKhiForwardingRofZagDpExtStatus7 | read-only | current | DP_INTERRUPT7 |
| 1.3.6.1.4.1.2272.1.85.11.15.1.83 | ColumnrcKhiForwardingRofZagPmmEgrMcMccRootLmt | read-only | current | PMM_EGRESS_MC_MCC_ROOT_LIMIT |
| 1.3.6.1.4.1.2272.1.85.11.15.1.84 | ColumnrcKhiForwardingRofZagTxbMcfifoFull | read-only | current | TXB_MC_FIFO_FULL |
| 1.3.6.1.4.1.2272.1.85.11.16 | TablercKhiForwardingRofZagErrTable | not-accessible | current | Forwarding Zagros Error Key Health Indicator MIB for RoF. |
| 1.3.6.1.4.1.2272.1.85.11.16.1 | RowrcKhiForwardingRofZagErrEntry | not-accessible | current | Forwarding Zagros Error KHI - RoF. |
| 1.3.6.1.4.1.2272.1.85.11.16.1.1 | ColumnrcKhiForwardingRofZagErrSlot | not-accessible | current | Slot Number |
| 1.3.6.1.4.1.2272.1.85.11.16.1.2 | ColumnrcKhiForwardingRofZagErrSlice | not-accessible | current | Slice Number |
| 1.3.6.1.4.1.2272.1.85.11.16.1.3 | ColumnrcKhiForwardingRofZagErrLane | not-accessible | current | Lane |
| 1.3.6.1.4.1.2272.1.85.11.16.1.4 | ColumnrcKhiForwardingRofZagPmmRspErr | read-only | current | PMM_RSP_ERROR |
| 1.3.6.1.4.1.2272.1.85.11.16.1.5 | ColumnrcKhiForwardingRofZagPmmDpErr | read-only | current | PMM_DP_ERROR |
| 1.3.6.1.4.1.2272.1.85.11.16.1.6 | ColumnrcKhiForwardingRofZagPmmFpErr | read-only | current | PMM_FP_ERROR |
| 1.3.6.1.4.1.2272.1.85.11.16.1.7 | ColumnrcKhiForwardingRofZagPmmPmErr | read-only | current | PMM_PM_ERROR |
| 1.3.6.1.4.1.2272.1.85.11.16.1.8 | ColumnrcKhiForwardingRofZagFpErr0 | read-only | current | FP_ERROR0 |
| 1.3.6.1.4.1.2272.1.85.11.16.1.9 | ColumnrcKhiForwardingRofZagFpErr1 | read-only | current | FP_ERROR1 |
| 1.3.6.1.4.1.2272.1.85.11.16.1.10 | ColumnrcKhiForwardingRofZagDpPortErr0 | read-only | current | DP_PORT_ERROR0 |
| 1.3.6.1.4.1.2272.1.85.11.16.1.11 | ColumnrcKhiForwardingRofZagDpPortErr1 | read-only | current | DP_PORT_ERROR1 |
| 1.3.6.1.4.1.2272.1.85.11.16.1.12 | ColumnrcKhiForwardingRofZagDpPortErr2 | read-only | current | DP_PORT_ERROR2 |
| 1.3.6.1.4.1.2272.1.85.11.16.1.13 | ColumnrcKhiForwardingRofZagDpPortErr3 | read-only | current | DP_PORT_ERROR3 |
| 1.3.6.1.4.1.2272.1.85.11.16.1.14 | ColumnrcKhiForwardingRofZagDpPortErr4 | read-only | current | DP_PORT_ERROR4 |
| 1.3.6.1.4.1.2272.1.85.11.16.1.15 | ColumnrcKhiForwardingRofZagDpPortErr5 | read-only | current | DP_PORT_ERROR5 |
| 1.3.6.1.4.1.2272.1.85.11.16.1.16 | ColumnrcKhiForwardingRofZagDpPortErr6 | read-only | current | DP_PORT_ERROR6 |
| 1.3.6.1.4.1.2272.1.85.11.16.1.17 | ColumnrcKhiForwardingRofZagDpPortErr7 | read-only | current | DP_PORT_ERROR7 |
| 1.3.6.1.4.1.2272.1.85.11.16.1.18 | ColumnrcKhiForwardingRofZagZag2HapErr | read-only | current | ZAG2_HAP_ERROR |
| 1.3.6.1.4.1.2272.1.85.11.16.1.19 | ColumnrcKhiForwardingRofZagEtpEgrFifoErr | read-only | current | ETP_EGR_FIFO_ERR |
| 1.3.6.1.4.1.2272.1.85.11.16.1.20 | ColumnrcKhiForwardingRofZagCifErrEvent | read-only | current | CIF_ERROR_EVENT |
| 1.3.6.1.4.1.2272.1.85.11.16.1.21 | ColumnrcKhiForwardingRofZagHabErrEvent | read-only | current | HAB_ERROR_EVENT |
| 1.3.6.1.4.1.2272.1.85.11.16.1.22 | ColumnrcKhiForwardingRofZagCifRxDropInfo | read-only | current | CIF RX DROP INFO |
| 1.3.6.1.4.1.2272.1.85.11.16.1.23 | ColumnrcKhiForwardingRofZagHabRxDropInfo | read-only | current | HAB_RX_DROP_INFO |
| 1.3.6.1.4.1.2272.1.85.11.16.1.24 | ColumnrcKhiForwardingRofZagDpExtErr0 | read-only | current | DP_PORT_ERROR0 |
| 1.3.6.1.4.1.2272.1.85.11.16.1.25 | ColumnrcKhiForwardingRofZagDpExtErr1 | read-only | current | DP_PORT_ERROR1 |
| 1.3.6.1.4.1.2272.1.85.11.16.1.26 | ColumnrcKhiForwardingRofZagDpExtErr2 | read-only | current | DP_PORT_ERROR2 |
| 1.3.6.1.4.1.2272.1.85.11.16.1.27 | ColumnrcKhiForwardingRofZagDpExtErr3 | read-only | current | DP_PORT_ERROR3 |
| 1.3.6.1.4.1.2272.1.85.11.16.1.28 | ColumnrcKhiForwardingRofZagDpExtErr4 | read-only | current | DP_PORT_ERROR4 |
| 1.3.6.1.4.1.2272.1.85.11.16.1.29 | ColumnrcKhiForwardingRofZagDpExtErr5 | read-only | current | DP_PORT_ERROR5 |
| 1.3.6.1.4.1.2272.1.85.11.16.1.30 | ColumnrcKhiForwardingRofZagDpExtErr6 | read-only | current | DP_PORT_ERROR6 |
| 1.3.6.1.4.1.2272.1.85.11.16.1.31 | ColumnrcKhiForwardingRofZagDpExtErr7 | read-only | current | DP_PORT_ERROR7 |
| 1.3.6.1.4.1.2272.1.85.11.17 | TablercKhiForwardingRofSierraStatusTable | not-accessible | current | Forwarding Sierra State Key Health Indicator MIB for RoF. |
| 1.3.6.1.4.1.2272.1.85.11.17.1 | RowrcKhiForwardingRofSierraStatusEntry | not-accessible | current | Forwarding Sierra State KHI - RoF. |
| 1.3.6.1.4.1.2272.1.85.11.17.1.1 | ColumnrcKhiForwardingRofSierraStatusSlot | not-accessible | current | Slot Number |
| 1.3.6.1.4.1.2272.1.85.11.17.1.2 | ColumnrcKhiForwardingRofSierraDevId | read-only | current | VSP assigned DEV_ID for this programmable device |
| 1.3.6.1.4.1.2272.1.85.11.17.1.3 | ColumnrcKhiForwardingRofSierraBuild | read-only | current | contains the build date of this device |
| 1.3.6.1.4.1.2272.1.85.11.17.1.4 | ColumnrcKhiForwardingRofSierraBadData | read-only | current | pkts received via HiGig0 |
| 1.3.6.1.4.1.2272.1.85.11.17.1.5 | ColumnrcKhiForwardingRofSierraSbRexEvent | read-only | current | indicates various events have occurred related to the SBus and RexBus interfaces |
| 1.3.6.1.4.1.2272.1.85.11.17.1.6 | ColumnrcKhiForwardingRofSierraRexStatus | read-only | current | contained information to determin ehat type of error occured during SB_REX_EVENT |
| 1.3.6.1.4.1.2272.1.85.11.17.1.7 | ColumnrcKhiForwardingRofSierraSbStatus | read-only | current | shows which one of the RSPng or Zagros2 devices are ready to receive SB accesses |
| 1.3.6.1.4.1.2272.1.85.11.17.1.8 | ColumnrcKhiForwardingRofSierraSliceXWindowEvent | read-only | current | captures error information on failed accesses to/from the Slice Window |
| 1.3.6.1.4.1.2272.1.85.11.17.1.9 | ColumnrcKhiForwardingRofSierraPcieCoreStatus | read-only | current | show 32 of the 512 available status signals from the Altera PCIe core |
| 1.3.6.1.4.1.2272.1.85.11.17.1.10 | ColumnrcKhiForwardingRofSierraPcieEvent | read-only | current | indicates when various PCIe related events have occurred |
| 1.3.6.1.4.1.2272.1.85.11.17.1.11 | ColumnrcKhiForwardingRofSierraPSI1Status | read-only | current | PSI1_STATUS Register related |
| 1.3.6.1.4.1.2272.1.85.11.17.1.12 | ColumnrcKhiForwardingRofSierraPSI0Status | read-only | current | PSI0_STATUS Register related |
| 1.3.6.1.4.1.2272.1.85.11.17.1.13 | ColumnrcKhiForwardingRofSierraPSIEvent | read-only | current | PSI_EVENT Register related |
| 1.3.6.1.4.1.2272.1.85.11.17.1.14 | ColumnrcKhiForwardingRofSierraPSI1LinkStatus | read-only | current | contents of a LINK_STATUS message received by PSI 1 |
| 1.3.6.1.4.1.2272.1.85.11.17.1.15 | ColumnrcKhiForwardingRofSierraPSI0LinkStatus | read-only | current | contents of a LINK_STATUS message received by PSI 0 |
| 1.3.6.1.4.1.2272.1.85.11.17.1.16 | ColumnrcKhiForwardingRofSierraGeStatus | read-only | current | shows status for the GE RGMII Interface |
| 1.3.6.1.4.1.2272.1.85.11.17.1.17 | ColumnrcKhiForwardingRofSierraGeEvent | read-only | current | indicates which GE related events have occurred since last cleared |
| 1.3.6.1.4.1.2272.1.85.11.17.1.18 | ColumnrcKhiForwardingRofSierraPktEvent | read-only | current | indicates which packet switching related events have occurred since last cleared |
| 1.3.6.1.4.1.2272.1.85.11.17.1.19 | ColumnrcKhiForwardingRofSierraZipStatus0 | read-only | current | shows status for ZIP interfaces |
| 1.3.6.1.4.1.2272.1.85.11.17.1.20 | ColumnrcKhiForwardingRofSierraZipStatus1 | read-only | current | shows status for ZIP interfaces |
| 1.3.6.1.4.1.2272.1.85.11.17.1.21 | ColumnrcKhiForwardingRofSierraZipStatus2 | read-only | current | shows status for ZIP interfaces |
| 1.3.6.1.4.1.2272.1.85.11.17.1.22 | ColumnrcKhiForwardingRofSierraZipStatus3 | read-only | current | shows status for ZIP interfaces |
| 1.3.6.1.4.1.2272.1.85.11.17.1.23 | ColumnrcKhiForwardingRofSierraZipStatus4 | read-only | current | shows status for ZIP interfaces |
| 1.3.6.1.4.1.2272.1.85.11.17.1.24 | ColumnrcKhiForwardingRofSierraZipStatus5 | read-only | current | shows status for ZIP interfaces |
| 1.3.6.1.4.1.2272.1.85.11.17.1.25 | ColumnrcKhiForwardingRofSierraZipEvent0 | read-only | current | shows which events occurred for ZIP interfaces |
| 1.3.6.1.4.1.2272.1.85.11.17.1.26 | ColumnrcKhiForwardingRofSierraZipEvent1 | read-only | current | shows which events occurred for ZIP interfaces |
| 1.3.6.1.4.1.2272.1.85.11.17.1.27 | ColumnrcKhiForwardingRofSierraZipEvent2 | read-only | current | shows which events occurred for ZIP interfaces |
| 1.3.6.1.4.1.2272.1.85.11.17.1.28 | ColumnrcKhiForwardingRofSierraZipEvent3 | read-only | current | shows which events occurred for ZIP interfaces |
| 1.3.6.1.4.1.2272.1.85.11.17.1.29 | ColumnrcKhiForwardingRofSierraZipEvent4 | read-only | current | shows which events occurred for ZIP interfaces |
| 1.3.6.1.4.1.2272.1.85.11.17.1.30 | ColumnrcKhiForwardingRofSierraZipEvent5 | read-only | current | shows which events occurred for ZIP interfaces |
| 1.3.6.1.4.1.2272.1.85.11.17.1.31 | ColumnrcKhiForwardingRofSierraSbmStatus0 | read-only | current | SBM_STATUS Register related for ZIP interfaces |
| 1.3.6.1.4.1.2272.1.85.11.17.1.32 | ColumnrcKhiForwardingRofSierraSbmStatus1 | read-only | current | SBM_STATUS Register related for ZIP interfaces |
| 1.3.6.1.4.1.2272.1.85.11.17.1.33 | ColumnrcKhiForwardingRofSierraSbmStatus2 | read-only | current | SBM_STATUS Register related for ZIP interfaces |
| 1.3.6.1.4.1.2272.1.85.11.17.1.34 | ColumnrcKhiForwardingRofSierraSbmStatus3 | read-only | current | SBM_STATUS Register related for ZIP interfaces |
| 1.3.6.1.4.1.2272.1.85.11.17.1.35 | ColumnrcKhiForwardingRofSierraSbmStatus4 | read-only | current | SBM_STATUS Register related for ZIP interfaces |
| 1.3.6.1.4.1.2272.1.85.11.17.1.36 | ColumnrcKhiForwardingRofSierraSbmStatus5 | read-only | current | SBM_STATUS Register related for ZIP interfaces |
| 1.3.6.1.4.1.2272.1.85.11.17.1.37 | ColumnrcKhiForwardingRofSierraSbmEvent0 | read-only | current | SBM_EVENT Register related for ZIP interfaces |
| 1.3.6.1.4.1.2272.1.85.11.17.1.38 | ColumnrcKhiForwardingRofSierraSbmEvent1 | read-only | current | SBM_EVENT Register related for ZIP interfaces |
| 1.3.6.1.4.1.2272.1.85.11.17.1.39 | ColumnrcKhiForwardingRofSierraSbmEvent2 | read-only | current | SBM_EVENT Register related for ZIP interfaces |
| 1.3.6.1.4.1.2272.1.85.11.17.1.40 | ColumnrcKhiForwardingRofSierraSbmEvent3 | read-only | current | SBM_EVENT Register related for ZIP interfaces |
| 1.3.6.1.4.1.2272.1.85.11.17.1.41 | ColumnrcKhiForwardingRofSierraSbmEvent4 | read-only | current | SBM_EVENT Register related for ZIP interfaces |
| 1.3.6.1.4.1.2272.1.85.11.17.1.42 | ColumnrcKhiForwardingRofSierraSbmEvent5 | read-only | current | SBM_EVENT Register related for ZIP interfaces |
| 1.3.6.1.4.1.2272.1.85.11.17.1.43 | ColumnrcKhiForwardingRofSierraSepEvent | read-only | current | various events(good/bad) that occur in the Script Engine Parsing logic section |
| 1.3.6.1.4.1.2272.1.85.11.18 | TablercKhiForwardingRofSierraForwStatsTable | not-accessible | current | Forwarding Sierra Forw Stats Key Health Indicator MIB for RoF. |
| 1.3.6.1.4.1.2272.1.85.11.18.1 | RowrcKhiForwardingRofSierraForwStatsEntry | not-accessible | current | Forwarding Sierra Forw Stats KHI - RoF. |
| 1.3.6.1.4.1.2272.1.85.11.18.1.1 | ColumnrcKhiForwardingRofSierraForwStatsSlot | not-accessible | current | Slot Number |
| 1.3.6.1.4.1.2272.1.85.11.18.1.2 | ColumnrcKhiForwardingRofSierraGeCntRxOk | read-only | current | counts the number of non-errored data packets received by the RX RGMII |
| 1.3.6.1.4.1.2272.1.85.11.18.1.3 | ColumnrcKhiForwardingRofSierraGeCntTxOk | read-only | current | counts the number of packets transmitted by the RX RGMII logic that were not marked as errored beforehand |
| 1.3.6.1.4.1.2272.1.85.11.18.1.4 | ColumnrcKhiForwardingRofSierraGeCntRxPause | read-only | current | counts the number of dropped non-data and pause packets received by the RX RGMII |
| 1.3.6.1.4.1.2272.1.85.11.18.1.5 | ColumnrcKhiForwardingRofSierraPktCntGeGe | read-only | current | counts the number of packets received by the GE interface and looped back out the GE interface |
| 1.3.6.1.4.1.2272.1.85.11.18.1.6 | ColumnrcKhiForwardingRofSierraPktCntGeZ0 | read-only | current | counts the number of packets of GE packets sent to ZIP 0 |
| 1.3.6.1.4.1.2272.1.85.11.18.1.7 | ColumnrcKhiForwardingRofSierraPktCntGeZ1 | read-only | current | counts the number of packets of GE packets sent to ZIP 1 |
| 1.3.6.1.4.1.2272.1.85.11.18.1.8 | ColumnrcKhiForwardingRofSierraPktCntGeZ2 | read-only | current | counts the number of packets of GE packets sent to ZIP 2 |
| 1.3.6.1.4.1.2272.1.85.11.18.1.9 | ColumnrcKhiForwardingRofSierraPktCntGeZ3 | read-only | current | counts the number of packets of GE packets sent to ZIP 3 |
| 1.3.6.1.4.1.2272.1.85.11.18.1.10 | ColumnrcKhiForwardingRofSierraPktCntGeZ4 | read-only | current | counts the number of packets of GE packets sent to ZIP 4 |
| 1.3.6.1.4.1.2272.1.85.11.18.1.11 | ColumnrcKhiForwardingRofSierraPktCntGeZ5 | read-only | current | counts the number of packets of GE packets sent to ZIP 5 |
| 1.3.6.1.4.1.2272.1.85.11.18.1.12 | ColumnrcKhiForwardingRofSierraPktCntZ0GeOk | read-only | current | counts the number of non-errored packets sent to GE from the ZIP 0 interface |
| 1.3.6.1.4.1.2272.1.85.11.18.1.13 | ColumnrcKhiForwardingRofSierraPktCntZ1GeOk | read-only | current | counts the number of non-errored packets sent to GE from the ZIP 1 interface |
| 1.3.6.1.4.1.2272.1.85.11.18.1.14 | ColumnrcKhiForwardingRofSierraPktCntZ2GeOk | read-only | current | counts the number of non-errored packets sent to GE from the ZIP 2 interface |
| 1.3.6.1.4.1.2272.1.85.11.18.1.15 | ColumnrcKhiForwardingRofSierraPktCntZ3GeOk | read-only | current | counts the number of non-errored packets sent to GE from the ZIP 3 interface |
| 1.3.6.1.4.1.2272.1.85.11.18.1.16 | ColumnrcKhiForwardingRofSierraPktCntZ4GeOk | read-only | current | counts the number of non-errored packets sent to GE from the ZIP 4 interface |
| 1.3.6.1.4.1.2272.1.85.11.18.1.17 | ColumnrcKhiForwardingRofSierraPktCntZ5GeOk | read-only | current | counts the number of non-errored packets sent to GE from the ZIP 5 interface |
| 1.3.6.1.4.1.2272.1.85.11.18.1.18 | ColumnrcKhiForwardingRofSierraSepPcieCnt0 | read-only | current | number of PCIe transactions |
| 1.3.6.1.4.1.2272.1.85.11.18.1.19 | ColumnrcKhiForwardingRofSierraSepPcieCnt1 | read-only | current | number of PCIe transactions |
| 1.3.6.1.4.1.2272.1.85.11.18.1.20 | ColumnrcKhiForwardingRofSierraSepPcieCnt2 | read-only | current | number of PCIe transactions |
| 1.3.6.1.4.1.2272.1.85.11.18.1.21 | ColumnrcKhiForwardingRofSierraSepPcieCnt3 | read-only | current | number of PCIe transactions |
| 1.3.6.1.4.1.2272.1.85.11.18.1.22 | ColumnrcKhiForwardingRofSierraSepPcieCnt4 | read-only | current | number of PCIe transactions |
| 1.3.6.1.4.1.2272.1.85.11.18.1.23 | ColumnrcKhiForwardingRofSierraSepPcieCnt5 | read-only | current | number of PCIe transactions |
| 1.3.6.1.4.1.2272.1.85.11.18.1.24 | ColumnrcKhiForwardingRofSierraSepPcieCnt6 | read-only | current | number of PCIe transactions |
| 1.3.6.1.4.1.2272.1.85.11.19 | TablercKhiForwardingRofSierraExtendedForwStatsTable | not-accessible | current | |
| 1.3.6.1.4.1.2272.1.85.11.19.1 | RowrcKhiForwardingRofSierraExtendedForwStatsEntry | not-accessible | current | |
| 1.3.6.1.4.1.2272.1.85.11.19.1.1 | ColumnrcKhiForwardingRofSierraExtendedForwStatsSlot | not-accessible | current | Slot Number |
| 1.3.6.1.4.1.2272.1.85.11.19.1.2 | ColumnrcKhiForwardingRofSierraZipTxFragDatCnt0 | read-only | current | count of data fragments across the ZIP interface |
| 1.3.6.1.4.1.2272.1.85.11.19.1.3 | ColumnrcKhiForwardingRofSierraZipTxFragDatCnt1 | read-only | current | count of data fragments across the ZIP interface |
| 1.3.6.1.4.1.2272.1.85.11.19.1.4 | ColumnrcKhiForwardingRofSierraZipTxFragDatCnt2 | read-only | current | count of data fragments across the ZIP interface |
| 1.3.6.1.4.1.2272.1.85.11.19.1.5 | ColumnrcKhiForwardingRofSierraZipTxFragDatCnt3 | read-only | current | count of data fragments across the ZIP interface |
| 1.3.6.1.4.1.2272.1.85.11.19.1.6 | ColumnrcKhiForwardingRofSierraZipTxFragDatCnt4 | read-only | current | count of data fragments across the ZIP interface |
| 1.3.6.1.4.1.2272.1.85.11.19.1.7 | ColumnrcKhiForwardingRofSierraZipTxFragDatCnt5 | read-only | current | count of data fragments across the ZIP interface |
| 1.3.6.1.4.1.2272.1.85.11.19.1.8 | ColumnrcKhiForwardingRofSierraZipTxFragRFU0Cnt0 | read-only | current | reserved for future use |
| 1.3.6.1.4.1.2272.1.85.11.19.1.9 | ColumnrcKhiForwardingRofSierraZipTxFragRFU0Cnt1 | read-only | current | reserved for future use |
| 1.3.6.1.4.1.2272.1.85.11.19.1.10 | ColumnrcKhiForwardingRofSierraZipTxFragRFU0Cnt2 | read-only | current | reserved for future use |
| 1.3.6.1.4.1.2272.1.85.11.19.1.11 | ColumnrcKhiForwardingRofSierraZipTxFragRFU0Cnt3 | read-only | current | reserved for future use |
| 1.3.6.1.4.1.2272.1.85.11.19.1.12 | ColumnrcKhiForwardingRofSierraZipTxFragRFU0Cnt4 | read-only | current | reserved for future use |
| 1.3.6.1.4.1.2272.1.85.11.19.1.13 | ColumnrcKhiForwardingRofSierraZipTxFragRFU0Cnt5 | read-only | current | reserved for future use |
| 1.3.6.1.4.1.2272.1.85.11.19.1.14 | ColumnrcKhiForwardingRofSierraZipTxFragRspCnt0 | read-only | current | count of RSP SubCmd fragments transmitted |
| 1.3.6.1.4.1.2272.1.85.11.19.1.15 | ColumnrcKhiForwardingRofSierraZipTxFragRspCnt1 | read-only | current | count of RSP SubCmd fragments transmitted |
| 1.3.6.1.4.1.2272.1.85.11.19.1.16 | ColumnrcKhiForwardingRofSierraZipTxFragRspCnt2 | read-only | current | count of RSP SubCmd fragments transmitted |
| 1.3.6.1.4.1.2272.1.85.11.19.1.17 | ColumnrcKhiForwardingRofSierraZipTxFragRspCnt3 | read-only | current | count of RSP SubCmd fragments transmitted |
| 1.3.6.1.4.1.2272.1.85.11.19.1.18 | ColumnrcKhiForwardingRofSierraZipTxFragRspCnt4 | read-only | current | count of RSP SubCmd fragments transmitted |
| 1.3.6.1.4.1.2272.1.85.11.19.1.19 | ColumnrcKhiForwardingRofSierraZipTxFragRspCnt5 | read-only | current | count of RSP SubCmd fragments transmitted |
| 1.3.6.1.4.1.2272.1.85.11.19.1.20 | ColumnrcKhiForwardingRofSierraZipTxFragPcieCnt0 | read-only | current | count of SB/PCIe SubCmd fragments transmitted |
| 1.3.6.1.4.1.2272.1.85.11.19.1.21 | ColumnrcKhiForwardingRofSierraZipTxFragPcieCnt1 | read-only | current | count of SB/PCIe SubCmd fragments transmitted |
| 1.3.6.1.4.1.2272.1.85.11.19.1.22 | ColumnrcKhiForwardingRofSierraZipTxFragPcieCnt2 | read-only | current | count of SB/PCIe SubCmd fragments transmitted |
| 1.3.6.1.4.1.2272.1.85.11.19.1.23 | ColumnrcKhiForwardingRofSierraZipTxFragPcieCnt3 | read-only | current | count of SB/PCIe SubCmd fragments transmitted |
| 1.3.6.1.4.1.2272.1.85.11.19.1.24 | ColumnrcKhiForwardingRofSierraZipTxFragPcieCnt4 | read-only | current | count of SB/PCIe SubCmd fragments transmitted |
| 1.3.6.1.4.1.2272.1.85.11.19.1.25 | ColumnrcKhiForwardingRofSierraZipTxFragPcieCnt5 | read-only | current | count of SB/PCIe SubCmd fragments transmitted |
| 1.3.6.1.4.1.2272.1.85.11.19.1.26 | ColumnrcKhiForwardingRofSierraZipTxFragSephCnt0 | read-only | current | count of SEP Hi Pri SubCmd fragments transmitted |
| 1.3.6.1.4.1.2272.1.85.11.19.1.27 | ColumnrcKhiForwardingRofSierraZipTxFragSephCnt1 | read-only | current | count of SEP Hi Pri SubCmd fragments transmitted |
| 1.3.6.1.4.1.2272.1.85.11.19.1.28 | ColumnrcKhiForwardingRofSierraZipTxFragSephCnt2 | read-only | current | count of SEP Hi Pri SubCmd fragments transmitted |
| 1.3.6.1.4.1.2272.1.85.11.19.1.29 | ColumnrcKhiForwardingRofSierraZipTxFragSephCnt3 | read-only | current | count of SEP Hi Pri SubCmd fragments transmitted |
| 1.3.6.1.4.1.2272.1.85.11.19.1.30 | ColumnrcKhiForwardingRofSierraZipTxFragSephCnt4 | read-only | current | count of SEP Hi Pri SubCmd fragments transmitted |
| 1.3.6.1.4.1.2272.1.85.11.19.1.31 | ColumnrcKhiForwardingRofSierraZipTxFragSephCnt5 | read-only | current | count of SEP Hi Pri SubCmd fragments transmitted |
| 1.3.6.1.4.1.2272.1.85.11.19.1.32 | ColumnrcKhiForwardingRofSierraZipTxFragSeplCnt0 | read-only | current | count of SEP Lo Pri SubCmd fragments transmitted |
| 1.3.6.1.4.1.2272.1.85.11.19.1.33 | ColumnrcKhiForwardingRofSierraZipTxFragSeplCnt1 | read-only | current | count of SEP Lo Pri SubCmd fragments transmitted |
| 1.3.6.1.4.1.2272.1.85.11.19.1.34 | ColumnrcKhiForwardingRofSierraZipTxFragSeplCnt2 | read-only | current | count of SEP Lo Pri SubCmd fragments transmitted |
| 1.3.6.1.4.1.2272.1.85.11.19.1.35 | ColumnrcKhiForwardingRofSierraZipTxFragSeplCnt3 | read-only | current | count of SEP Lo Pri SubCmd fragments transmitted |
| 1.3.6.1.4.1.2272.1.85.11.19.1.36 | ColumnrcKhiForwardingRofSierraZipTxFragSeplCnt4 | read-only | current | count of SEP Lo Pri SubCmd fragments transmitted |
| 1.3.6.1.4.1.2272.1.85.11.19.1.37 | ColumnrcKhiForwardingRofSierraZipTxFragSeplCnt5 | read-only | current | count of SEP Lo Pri SubCmd fragments transmitted |
| 1.3.6.1.4.1.2272.1.85.11.19.1.38 | ColumnrcKhiForwardingRofSierraZipTxFragRFU1Cnt0 | read-only | current | reserved for future use |
| 1.3.6.1.4.1.2272.1.85.11.19.1.39 | ColumnrcKhiForwardingRofSierraZipTxFragRFU1Cnt1 | read-only | current | reserved for future use |
| 1.3.6.1.4.1.2272.1.85.11.19.1.40 | ColumnrcKhiForwardingRofSierraZipTxFragRFU1Cnt2 | read-only | current | reserved for future use |
| 1.3.6.1.4.1.2272.1.85.11.19.1.41 | ColumnrcKhiForwardingRofSierraZipTxFragRFU1Cnt3 | read-only | current | reserved for future use |
| 1.3.6.1.4.1.2272.1.85.11.19.1.42 | ColumnrcKhiForwardingRofSierraZipTxFragRFU1Cnt4 | read-only | current | reserved for future use |
| 1.3.6.1.4.1.2272.1.85.11.19.1.43 | ColumnrcKhiForwardingRofSierraZipTxFragRFU1Cnt5 | read-only | current | reserved for future use |
| 1.3.6.1.4.1.2272.1.85.11.19.1.44 | ColumnrcKhiForwardingRofSierraZipTxFragRFU2Cnt0 | read-only | current | reserved for future use |
| 1.3.6.1.4.1.2272.1.85.11.19.1.45 | ColumnrcKhiForwardingRofSierraZipTxFragRFU2Cnt1 | read-only | current | reserved for future use |
| 1.3.6.1.4.1.2272.1.85.11.19.1.46 | ColumnrcKhiForwardingRofSierraZipTxFragRFU2Cnt2 | read-only | current | reserved for future use |
| 1.3.6.1.4.1.2272.1.85.11.19.1.47 | ColumnrcKhiForwardingRofSierraZipTxFragRFU2Cnt3 | read-only | current | reserved for future use |
| 1.3.6.1.4.1.2272.1.85.11.19.1.48 | ColumnrcKhiForwardingRofSierraZipTxFragRFU2Cnt4 | read-only | current | reserved for future use |
| 1.3.6.1.4.1.2272.1.85.11.19.1.49 | ColumnrcKhiForwardingRofSierraZipTxFragRFU2Cnt5 | read-only | current | reserved for future use |
| 1.3.6.1.4.1.2272.1.85.11.19.1.50 | ColumnrcKhiForwardingRofSierraZipRxFragDatOkCnt0 | read-only | current | count of ok data frags received via the ZIP |
| 1.3.6.1.4.1.2272.1.85.11.19.1.51 | ColumnrcKhiForwardingRofSierraZipRxFragDatOkCnt1 | read-only | current | count of ok data frags received via the ZIP |
| 1.3.6.1.4.1.2272.1.85.11.19.1.52 | ColumnrcKhiForwardingRofSierraZipRxFragDatOkCnt2 | read-only | current | count of ok data frags received via the ZIP |
| 1.3.6.1.4.1.2272.1.85.11.19.1.53 | ColumnrcKhiForwardingRofSierraZipRxFragDatOkCnt3 | read-only | current | count of ok data frags received via the ZIP |
| 1.3.6.1.4.1.2272.1.85.11.19.1.54 | ColumnrcKhiForwardingRofSierraZipRxFragDatOkCnt4 | read-only | current | count of ok data frags received via the ZIP |
| 1.3.6.1.4.1.2272.1.85.11.19.1.55 | ColumnrcKhiForwardingRofSierraZipRxFragDatOkCnt5 | read-only | current | count of ok data frags received via the ZIP |
| 1.3.6.1.4.1.2272.1.85.11.19.1.56 | ColumnrcKhiForwardingRofSierraZipRxFragRspOkCnt0 | read-only | current | count of ok RSP SubCmd fragments received |
| 1.3.6.1.4.1.2272.1.85.11.19.1.57 | ColumnrcKhiForwardingRofSierraZipRxFragRspOkCnt1 | read-only | current | count of ok RSP SubCmd fragments received |
| 1.3.6.1.4.1.2272.1.85.11.19.1.58 | ColumnrcKhiForwardingRofSierraZipRxFragRspOkCnt2 | read-only | current | count of ok RSP SubCmd fragments received |
| 1.3.6.1.4.1.2272.1.85.11.19.1.59 | ColumnrcKhiForwardingRofSierraZipRxFragRspOkCnt3 | read-only | current | count of ok RSP SubCmd fragments received |
| 1.3.6.1.4.1.2272.1.85.11.19.1.60 | ColumnrcKhiForwardingRofSierraZipRxFragRspOkCnt4 | read-only | current | count of ok RSP SubCmd fragments received |
| 1.3.6.1.4.1.2272.1.85.11.19.1.61 | ColumnrcKhiForwardingRofSierraZipRxFragRspOkCnt5 | read-only | current | count of ok RSP SubCmd fragments received |
| 1.3.6.1.4.1.2272.1.85.11.19.1.62 | ColumnrcKhiForwardingRofSierraZipRxFragPcieOkCnt0 | read-only | current | count of ok SB/PCIe SubCmd frags received |
| 1.3.6.1.4.1.2272.1.85.11.19.1.63 | ColumnrcKhiForwardingRofSierraZipRxFragPcieOkCnt1 | read-only | current | count of ok SB/PCIe SubCmd frags received |
| 1.3.6.1.4.1.2272.1.85.11.19.1.64 | ColumnrcKhiForwardingRofSierraZipRxFragPcieOkCnt2 | read-only | current | count of ok SB/PCIe SubCmd frags received |
| 1.3.6.1.4.1.2272.1.85.11.19.1.65 | ColumnrcKhiForwardingRofSierraZipRxFragPcieOkCnt3 | read-only | current | count of ok SB/PCIe SubCmd frags received |
| 1.3.6.1.4.1.2272.1.85.11.19.1.66 | ColumnrcKhiForwardingRofSierraZipRxFragPcieOkCnt4 | read-only | current | count of ok SB/PCIe SubCmd frags received |
| 1.3.6.1.4.1.2272.1.85.11.19.1.67 | ColumnrcKhiForwardingRofSierraZipRxFragPcieOkCnt5 | read-only | current | count of ok SB/PCIe SubCmd frags received |
| 1.3.6.1.4.1.2272.1.85.11.19.1.68 | ColumnrcKhiForwardingRofSierraZipRxFragSephOkCnt0 | read-only | current | count of ok SEP Hi Pri SubCmd frags received |
| 1.3.6.1.4.1.2272.1.85.11.19.1.69 | ColumnrcKhiForwardingRofSierraZipRxFragSephOkCnt1 | read-only | current | count of ok SEP Hi Pri SubCmd frags received |
| 1.3.6.1.4.1.2272.1.85.11.19.1.70 | ColumnrcKhiForwardingRofSierraZipRxFragSephOkCnt2 | read-only | current | count of ok SEP Hi Pri SubCmd frags received |
| 1.3.6.1.4.1.2272.1.85.11.19.1.71 | ColumnrcKhiForwardingRofSierraZipRxFragSephOkCnt3 | read-only | current | count of ok SEP Hi Pri SubCmd frags received |
| 1.3.6.1.4.1.2272.1.85.11.19.1.72 | ColumnrcKhiForwardingRofSierraZipRxFragSephOkCnt4 | read-only | current | count of ok SEP Hi Pri SubCmd frags received |
| 1.3.6.1.4.1.2272.1.85.11.19.1.73 | ColumnrcKhiForwardingRofSierraZipRxFragSephOkCnt5 | read-only | current | count of ok SEP Hi Pri SubCmd frags received |
| 1.3.6.1.4.1.2272.1.85.11.19.1.74 | ColumnrcKhiForwardingRofSierraZipRxFragSeplOkCnt0 | read-only | current | count of ok SEP Lo Pri SubCmd frags received |
| 1.3.6.1.4.1.2272.1.85.11.19.1.75 | ColumnrcKhiForwardingRofSierraZipRxFragSeplOkCnt1 | read-only | current | count of ok SEP Lo Pri SubCmd frags received |
| 1.3.6.1.4.1.2272.1.85.11.19.1.76 | ColumnrcKhiForwardingRofSierraZipRxFragSeplOkCnt2 | read-only | current | count of ok SEP Lo Pri SubCmd frags received |
| 1.3.6.1.4.1.2272.1.85.11.19.1.77 | ColumnrcKhiForwardingRofSierraZipRxFragSeplOkCnt3 | read-only | current | count of ok SEP Lo Pri SubCmd frags received |
| 1.3.6.1.4.1.2272.1.85.11.19.1.78 | ColumnrcKhiForwardingRofSierraZipRxFragSeplOkCnt4 | read-only | current | count of ok SEP Lo Pri SubCmd frags received |
| 1.3.6.1.4.1.2272.1.85.11.19.1.79 | ColumnrcKhiForwardingRofSierraZipRxFragSeplOkCnt5 | read-only | current | count of ok SEP Lo Pri SubCmd frags received |
| 1.3.6.1.4.1.2272.1.85.11.20 | TablercKhiForwardingRofSierraDropStatsTable | not-accessible | current | Forwarding Sierra Drop Stats Key Health Indicator MIB for RoF. |
| 1.3.6.1.4.1.2272.1.85.11.20.1 | RowrcKhiForwardingRofSierraDropStatsEntry | not-accessible | current | Forwarding Sierra Drop Stats KHI - RoF. |
| 1.3.6.1.4.1.2272.1.85.11.20.1.1 | ColumnrcKhiForwardingRofSierraDropStatsSlot | not-accessible | current | Slot Number |
| 1.3.6.1.4.1.2272.1.85.11.20.1.2 | ColumnrcKhiForwardingRofSierraGeCntRxErr | read-only | current | counts the number of errored packets received by the RX RGMII logic |
| 1.3.6.1.4.1.2272.1.85.11.20.1.3 | ColumnrcKhiForwardingRofSierraGeCntTxErr | read-only | current | counts the number of packets transmitted by the GE RGMII logic that were marked as errored before hand |
| 1.3.6.1.4.1.2272.1.85.11.20.1.4 | ColumnrcKhiForwardingRofSierraPktCntGeDrop | read-only | current | counts the number of packets received by the GE interface and then dropped |
| 1.3.6.1.4.1.2272.1.85.11.20.1.5 | ColumnrcKhiForwardingRofSierraPktCntZ0GeErr | read-only | current | counts the number of errored packets sent to GE from the ZIP 0 interface |
| 1.3.6.1.4.1.2272.1.85.11.20.1.6 | ColumnrcKhiForwardingRofSierraPktCntZ1GeErr | read-only | current | counts the number of errored packets sent to GE from the ZIP 1 interface |
| 1.3.6.1.4.1.2272.1.85.11.20.1.7 | ColumnrcKhiForwardingRofSierraPktCntZ2GeErr | read-only | current | counts the number of errored packets sent to GE from the ZIP 2 |
| 1.3.6.1.4.1.2272.1.85.11.20.1.8 | ColumnrcKhiForwardingRofSierraPktCntZ3GeErr | read-only | current | counts the number of errored packets sent to GE from the ZIP 3 |
| 1.3.6.1.4.1.2272.1.85.11.20.1.9 | ColumnrcKhiForwardingRofSierraPktCntZ4GeErr | read-only | current | counts the number of errored packets sent to GE from the ZIP 4 |
| 1.3.6.1.4.1.2272.1.85.11.20.1.10 | ColumnrcKhiForwardingRofSierraPktCntZ5GeErr | read-only | current | counts the number of errored packets sent to GE from the ZIP 5 |
| 1.3.6.1.4.1.2272.1.85.11.20.1.11 | ColumnrcKhiForwardingRofSierraZipRxFragDatErrCnt0 | read-only | current | count of errored data frags received via the ZIP |
| 1.3.6.1.4.1.2272.1.85.11.20.1.12 | ColumnrcKhiForwardingRofSierraZipRxFragDatErrCnt1 | read-only | current | count of errored data frags received via the ZIP |
| 1.3.6.1.4.1.2272.1.85.11.20.1.13 | ColumnrcKhiForwardingRofSierraZipRxFragDatErrCnt2 | read-only | current | count of errored data frags received via the ZIP |
| 1.3.6.1.4.1.2272.1.85.11.20.1.14 | ColumnrcKhiForwardingRofSierraZipRxFragDatErrCnt3 | read-only | current | count of errored data frags received via the ZIP |
| 1.3.6.1.4.1.2272.1.85.11.20.1.15 | ColumnrcKhiForwardingRofSierraZipRxFragDatErrCnt4 | read-only | current | count of errored data frags received via the ZIP |
| 1.3.6.1.4.1.2272.1.85.11.20.1.16 | ColumnrcKhiForwardingRofSierraZipRxFragDatErrCnt5 | read-only | current | count of errored data frags received via the ZIP |
| 1.3.6.1.4.1.2272.1.85.11.20.1.17 | ColumnrcKhiForwardingRofSierraZipRxFragRspErrCnt0 | read-only | current | count of errored RSP SubCmd fragments received |
| 1.3.6.1.4.1.2272.1.85.11.20.1.18 | ColumnrcKhiForwardingRofSierraZipRxFragRspErrCnt1 | read-only | current | count of errored RSP SubCmd fragments received |
| 1.3.6.1.4.1.2272.1.85.11.20.1.19 | ColumnrcKhiForwardingRofSierraZipRxFragRspErrCnt2 | read-only | current | count of errored RSP SubCmd fragments received |
| 1.3.6.1.4.1.2272.1.85.11.20.1.20 | ColumnrcKhiForwardingRofSierraZipRxFragRspErrCnt3 | read-only | current | count of errored RSP SubCmd fragments received |
| 1.3.6.1.4.1.2272.1.85.11.20.1.21 | ColumnrcKhiForwardingRofSierraZipRxFragRspErrCnt4 | read-only | current | count of errored RSP SubCmd fragments received |
| 1.3.6.1.4.1.2272.1.85.11.20.1.22 | ColumnrcKhiForwardingRofSierraZipRxFragRspErrCnt5 | read-only | current | count of errored RSP SubCmd fragments received |
| 1.3.6.1.4.1.2272.1.85.11.20.1.23 | ColumnrcKhiForwardingRofSierraZipRxFragPcieErrCnt0 | read-only | current | count of errored SB/PCIe SubCmd frags received |
| 1.3.6.1.4.1.2272.1.85.11.20.1.24 | ColumnrcKhiForwardingRofSierraZipRxFragPcieErrCnt1 | read-only | current | count of errored SB/PCIe SubCmd frags received |
| 1.3.6.1.4.1.2272.1.85.11.20.1.25 | ColumnrcKhiForwardingRofSierraZipRxFragPcieErrCnt2 | read-only | current | count of errored SB/PCIe SubCmd frags received |
| 1.3.6.1.4.1.2272.1.85.11.20.1.26 | ColumnrcKhiForwardingRofSierraZipRxFragPcieErrCnt3 | read-only | current | count of errored SB/PCIe SubCmd frags received |
| 1.3.6.1.4.1.2272.1.85.11.20.1.27 | ColumnrcKhiForwardingRofSierraZipRxFragPcieErrCnt4 | read-only | current | count of errored SB/PCIe SubCmd frags received |
| 1.3.6.1.4.1.2272.1.85.11.20.1.28 | ColumnrcKhiForwardingRofSierraZipRxFragPcieErrCnt5 | read-only | current | count of errored SB/PCIe SubCmd frags received |
| 1.3.6.1.4.1.2272.1.85.11.20.1.29 | ColumnrcKhiForwardingRofSierraZipRxFragSephErrCnt0 | read-only | current | count of errored SEP Hi Pri SubCmd frags received |
| 1.3.6.1.4.1.2272.1.85.11.20.1.30 | ColumnrcKhiForwardingRofSierraZipRxFragSephErrCnt1 | read-only | current | count of errored SEP Hi Pri SubCmd frags received |
| 1.3.6.1.4.1.2272.1.85.11.20.1.31 | ColumnrcKhiForwardingRofSierraZipRxFragSephErrCnt2 | read-only | current | count of errored SEP Hi Pri SubCmd frags received |
| 1.3.6.1.4.1.2272.1.85.11.20.1.32 | ColumnrcKhiForwardingRofSierraZipRxFragSephErrCnt3 | read-only | current | count of errored SEP Hi Pri SubCmd frags received |
| 1.3.6.1.4.1.2272.1.85.11.20.1.33 | ColumnrcKhiForwardingRofSierraZipRxFragSephErrCnt4 | read-only | current | count of errored SEP Hi Pri SubCmd frags received |
| 1.3.6.1.4.1.2272.1.85.11.20.1.34 | ColumnrcKhiForwardingRofSierraZipRxFragSephErrCnt5 | read-only | current | count of errored SEP Hi Pri SubCmd frags received |
| 1.3.6.1.4.1.2272.1.85.11.20.1.35 | ColumnrcKhiForwardingRofSierraZipRxFragSeplErrCnt0 | read-only | current | count of errored SEP Lo Pri SubCmd frags received |
| 1.3.6.1.4.1.2272.1.85.11.20.1.36 | ColumnrcKhiForwardingRofSierraZipRxFragSeplErrCnt1 | read-only | current | count of errored SEP Lo Pri SubCmd frags received |
| 1.3.6.1.4.1.2272.1.85.11.20.1.37 | ColumnrcKhiForwardingRofSierraZipRxFragSeplErrCnt2 | read-only | current | count of errored SEP Lo Pri SubCmd frags received |
| 1.3.6.1.4.1.2272.1.85.11.20.1.38 | ColumnrcKhiForwardingRofSierraZipRxFragSeplErrCnt3 | read-only | current | count of errored SEP Lo Pri SubCmd frags received |
| 1.3.6.1.4.1.2272.1.85.11.20.1.39 | ColumnrcKhiForwardingRofSierraZipRxFragSeplErrCnt4 | read-only | current | count of errored SEP Lo Pri SubCmd frags received |
| 1.3.6.1.4.1.2272.1.85.11.20.1.40 | ColumnrcKhiForwardingRofSierraZipRxFragSeplErrCnt5 | read-only | current | count of errored SEP Lo Pri SubCmd frags received |
| 1.3.6.1.4.1.2272.1.85.11.20.1.41 | ColumnrcKhiForwardingRofSierraZipRxFragDropCnt0 | read-only | current | count of frags dropped(usually due to bad headers) |
| 1.3.6.1.4.1.2272.1.85.11.20.1.42 | ColumnrcKhiForwardingRofSierraZipRxFragDropCnt1 | read-only | current | count of frags dropped(usually due to bad headers) |
| 1.3.6.1.4.1.2272.1.85.11.20.1.43 | ColumnrcKhiForwardingRofSierraZipRxFragDropCnt2 | read-only | current | count of frags dropped(usually due to bad headers) |
| 1.3.6.1.4.1.2272.1.85.11.20.1.44 | ColumnrcKhiForwardingRofSierraZipRxFragDropCnt3 | read-only | current | count of frags dropped(usually due to bad headers) |
| 1.3.6.1.4.1.2272.1.85.11.20.1.45 | ColumnrcKhiForwardingRofSierraZipRxFragDropCnt4 | read-only | current | count of frags dropped(usually due to bad headers) |
| 1.3.6.1.4.1.2272.1.85.11.20.1.46 | ColumnrcKhiForwardingRofSierraZipRxFragDropCnt5 | read-only | current | count of frags dropped(usually due to bad headers) |
| 1.3.6.1.4.1.2272.1.85.11.20.1.47 | ColumnrcKhiForwardingRofSierraZipRxFragInvctlCnt0 | read-only | current | count of frags dropped(usually due to bad headers) |
| 1.3.6.1.4.1.2272.1.85.11.20.1.48 | ColumnrcKhiForwardingRofSierraZipRxFragInvctlCnt1 | read-only | current | count of frags dropped(usually due to bad headers) |
| 1.3.6.1.4.1.2272.1.85.11.20.1.49 | ColumnrcKhiForwardingRofSierraZipRxFragInvctlCnt2 | read-only | current | count of frags dropped(usually due to bad headers) |
| 1.3.6.1.4.1.2272.1.85.11.20.1.50 | ColumnrcKhiForwardingRofSierraZipRxFragInvctlCnt3 | read-only | current | count of frags dropped(usually due to bad headers) |
| 1.3.6.1.4.1.2272.1.85.11.20.1.51 | ColumnrcKhiForwardingRofSierraZipRxFragInvctlCnt4 | read-only | current | count of frags dropped(usually due to bad headers) |
| 1.3.6.1.4.1.2272.1.85.11.20.1.52 | ColumnrcKhiForwardingRofSierraZipRxFragInvctlCnt5 | read-only | current | count of frags dropped(usually due to bad headers) |
| 1.3.6.1.4.1.2272.1.85.11.21 | TablercKhiForwardingRofRspForwTable | not-accessible | current | Forwarding RSP Stats Key Health Indicator MIB for RoF. |
| 1.3.6.1.4.1.2272.1.85.11.21.1 | RowrcKhiForwardingRofRspForwEntry | not-accessible | current | Forwarding RSP Stats KHI - RoF. |
| 1.3.6.1.4.1.2272.1.85.11.21.1.1 | ColumnrcKhiForwardingRofRspForwSlot | not-accessible | current | Slot Number |
| 1.3.6.1.4.1.2272.1.85.11.21.1.2 | ColumnrcKhiForwardingRofRspForwSlice | not-accessible | current | Slice Number |
| 1.3.6.1.4.1.2272.1.85.11.21.1.3 | ColumnrcKhiForwardingRofRspForwReg | not-accessible | current | Reg |
| 1.3.6.1.4.1.2272.1.85.11.21.1.4 | ColumnrcKhiForwardingRofRspForwHab0RxPktCounterReg | read-only | current | HAB0_RX_PACKET_COUNTER_REG |
| 1.3.6.1.4.1.2272.1.85.11.21.1.5 | ColumnrcKhiForwardingRofRspForwHab0TxPktCounterReg | read-only | current | HAB0_TX_PACKET_COUNTER_REG |
| 1.3.6.1.4.1.2272.1.85.11.21.1.6 | ColumnrcKhiForwardingRofRspForwHab1RxPktCounterReg | read-only | current | HAB1_RX_PACKET_COUNTER_REG |
| 1.3.6.1.4.1.2272.1.85.11.21.1.7 | ColumnrcKhiForwardingRofRspForwHab1TxPktCounterReg | read-only | current | HAB1_TX_PACKET_COUNTER_RE |
| 1.3.6.1.4.1.2272.1.85.11.21.1.8 | ColumnrcKhiForwardingRofRspForwCif0RxPktCntReg | read-only | current | CIF0_RX_PACKET_COUNTER_REG |
| 1.3.6.1.4.1.2272.1.85.11.21.1.9 | ColumnrcKhiForwardingRofRspForwCif0TxPktCntReg | read-only | current | CIF0_TX_PACKET_COUNTER_REG |
| 1.3.6.1.4.1.2272.1.85.11.21.1.10 | ColumnrcKhiForwardingRofRspForwCif1RxPktCntReg | read-only | current | CIF1_RX_PACKET_COUNTER_REG |
| 1.3.6.1.4.1.2272.1.85.11.21.1.11 | ColumnrcKhiForwardingRofRspForwCif1TxPktCntReg | read-only | current | CIF1_TX_PACKET_COUNTER_REG |
| 1.3.6.1.4.1.2272.1.85.11.21.1.12 | ColumnrcKhiForwardingRofRspForwPbmHab0RxPktCntReg | read-only | current | PBM_HAB0_RX_PACKLET_COUNT_REG |
| 1.3.6.1.4.1.2272.1.85.11.21.1.13 | ColumnrcKhiForwardingRofRspForwPbmHab0TxPktCntReg | read-only | current | PBM_HAB0_TX_PACKLET_COUNT_REG |
| 1.3.6.1.4.1.2272.1.85.11.21.1.14 | ColumnrcKhiForwardingRofRspForwPbmHab1RxPktCntReg | read-only | current | PBM_HAB1_RX_PACKLET_COUNT_REG |
| 1.3.6.1.4.1.2272.1.85.11.21.1.15 | ColumnrcKhiForwardingRofRspForwPbmHab1TxPktCntReg | read-only | current | PBM_HAB1_TX_PACKLET_COUNT_REG |
| 1.3.6.1.4.1.2272.1.85.11.21.1.16 | ColumnrcKhiForwardingRofRspForwPbmHab0Hab1SopEopCntReg | read-only | current | PBM_HAB0_HAB1_SOP_EOP_COUNT_REG |
| 1.3.6.1.4.1.2272.1.85.11.21.1.17 | ColumnrcKhiForwardingRofRspForwSamPackletInCntReg | read-only | current | SAM_PACKLET_IN_COUNTS_REG |
| 1.3.6.1.4.1.2272.1.85.11.21.1.18 | ColumnrcKhiForwardingRofRspForwSamPackletOutCntReg | read-only | current | SAM_PACKLET_OUT_COUNTS_REG |
| 1.3.6.1.4.1.2272.1.85.11.21.1.19 | ColumnrcKhiForwardingRofRspForwSamAe0GabTransRegTx | read-only | current | SAM_AE0GAB_TRANSACTIONS_REG_TX |
| 1.3.6.1.4.1.2272.1.85.11.21.1.20 | ColumnrcKhiForwardingRofRspForwSamAe0GabTransRegRx | read-only | current | SAM_AE0GAB_TRANSACTIONS_REG_RX |
| 1.3.6.1.4.1.2272.1.85.11.21.1.21 | ColumnrcKhiForwardingRofRspForwSamAe1GabTransRegTx | read-only | current | SAM_AE1GAB_TRANSACTIONS_REG_TX |
| 1.3.6.1.4.1.2272.1.85.11.21.1.22 | ColumnrcKhiForwardingRofRspForwSamAe1GabTransRegRx | read-only | current | SAM_AE1GAB_TRANSACTIONS_REG_RX |
| 1.3.6.1.4.1.2272.1.85.11.21.1.23 | ColumnrcKhiForwardingRofRspForwSamAe2GabTransRegTx | read-only | current | SAM_AE2GAB_TRANSACTIONS_REG_TX |
| 1.3.6.1.4.1.2272.1.85.11.21.1.24 | ColumnrcKhiForwardingRofRspForwSamAe2GabTransRegRx | read-only | current | SAM_AE2GAB_TRANSACTIONS_REG_RX |
| 1.3.6.1.4.1.2272.1.85.11.21.1.25 | ColumnrcKhiForwardingRofRspForwSamAe3GabTransRegTx | read-only | current | SAM_AE3GAB_TRANSACTIONS_REG_TX |
| 1.3.6.1.4.1.2272.1.85.11.21.1.26 | ColumnrcKhiForwardingRofRspForwSamAe3GabTransRegRx | read-only | current | SAM_AE3GAB_TRANSACTIONS_REG_RX |
| 1.3.6.1.4.1.2272.1.85.11.21.1.27 | ColumnrcKhiForwardingRofRspForwSamR6Le0GabTransRegTx | read-only | current | SAM_R6LE0GAB_TRANSACTIONS_REG_TX |
| 1.3.6.1.4.1.2272.1.85.11.21.1.28 | ColumnrcKhiForwardingRofRspForwSamR6Le0GabTransRegRx | read-only | current | SAM_R6LE0GAB_TRANSACTIONS_REG_RX |
| 1.3.6.1.4.1.2272.1.85.11.21.1.29 | ColumnrcKhiForwardingRofRspForwSamR6Le1GabTransRegTx | read-only | current | SAM_R6LE1GAB_TRANSACTIONS_REG_TX |
| 1.3.6.1.4.1.2272.1.85.11.21.1.30 | ColumnrcKhiForwardingRofRspForwSamR6Le1GabTransRegRx | read-only | current | SAM_R6LE1GAB_TRANSACTIONS_REG_RX |
| 1.3.6.1.4.1.2272.1.85.11.21.1.31 | ColumnrcKhiForwardingRofRspForwSamR6Le2GabTransRegTx | read-only | current | SAM_R6LE2GAB_TRANSACTIONS_REG_TX |
| 1.3.6.1.4.1.2272.1.85.11.21.1.32 | ColumnrcKhiForwardingRofRspForwSamR6Le2GabTransRegRx | read-only | current | SAM_R6LE2GAB_TRANSACTIONS_REG_RX |
| 1.3.6.1.4.1.2272.1.85.11.21.1.33 | ColumnrcKhiForwardingRofRspForwSamR6Le3GabTransRegTx | read-only | current | SAM_R6LE3GAB_TRANSACTIONS_REG_TX |
| 1.3.6.1.4.1.2272.1.85.11.21.1.34 | ColumnrcKhiForwardingRofRspForwSamR6Le3GabTransRegRx | read-only | current | SAM_R6LE3GAB_TRANSACTIONS_REG_RX |
| 1.3.6.1.4.1.2272.1.85.11.21.1.35 | ColumnrcKhiForwardingRofRspForwSamR5LeGabTransRegTx | read-only | current | SAM_R5LEGAB_TRANSACTIONS_REG_TX |
| 1.3.6.1.4.1.2272.1.85.11.21.1.36 | ColumnrcKhiForwardingRofRspForwSamR5LeGabTransRegRx | read-only | current | SAM_R5LEGAB_TRANSACTIONS_REG_RX |
| 1.3.6.1.4.1.2272.1.85.11.21.1.37 | ColumnrcKhiForwardingRofRspForwSamCifGabTransRegTx | read-only | current | SAM_CIFGAB_TRANSACTIONS_REG_TX |
| 1.3.6.1.4.1.2272.1.85.11.21.1.38 | ColumnrcKhiForwardingRofRspForwSamCifGabTransRegRx | read-only | current | SAM_CIFGAB_TRANSACTIONS_REG_RX |
| 1.3.6.1.4.1.2272.1.85.11.21.1.39 | ColumnrcKhiForwardingRofRspForwSanHle0GabTransRegTx | read-only | current | SAM_HLE0GAB_TRANSACTIONS_REG_TX |
| 1.3.6.1.4.1.2272.1.85.11.21.1.40 | ColumnrcKhiForwardingRofRspForwSanHle0GabTransRegRx | read-only | current | SAM_HLE0GAB_TRANSACTIONS_REG_RX |
| 1.3.6.1.4.1.2272.1.85.11.21.1.41 | ColumnrcKhiForwardingRofRspForwSamAlseGabTransRegTx | read-only | current | SAM_ALSEGAB_TRANSACTIONS_REG_TX |
| 1.3.6.1.4.1.2272.1.85.11.21.1.42 | ColumnrcKhiForwardingRofRspForwSamAlseGabTransRegRx | read-only | current | SAM_ALSEGAB_TRANSACTIONS_REG_RX |
| 1.3.6.1.4.1.2272.1.85.11.21.1.43 | ColumnrcKhiForwardingRofRspForwAmPaGabPackletInReg | read-only | current | AM_PAGAB_PACKLET_IN_REG |
| 1.3.6.1.4.1.2272.1.85.11.21.1.44 | ColumnrcKhiForwardingRofRspForwAmPrGabPacketOutReg | read-only | current | AM_PRGAB_PACKLET_OUT_REG |
| 1.3.6.1.4.1.2272.1.85.11.21.1.45 | ColumnrcKhiForwardingRofRspForwAmAe0GabTransRegTx | read-only | current | AM_AE0GAB_TRANSACTIONS_REG_TX |
| 1.3.6.1.4.1.2272.1.85.11.21.1.46 | ColumnrcKhiForwardingRofRspForwAmAe0GabTransRegRx | read-only | current | AM_AE0GAB_TRANSACTIONS_REG_RX |
| 1.3.6.1.4.1.2272.1.85.11.21.1.47 | ColumnrcKhiForwardingRofRspForwAmAe1GabTransRegTx | read-only | current | AM_AE1GAB_TRANSACTIONS_REG_TX |
| 1.3.6.1.4.1.2272.1.85.11.21.1.48 | ColumnrcKhiForwardingRofRspForwAmAe1GabTransRegRx | read-only | current | AM_AE1GAB_TRANSACTIONS_REG_RX |
| 1.3.6.1.4.1.2272.1.85.11.21.1.49 | ColumnrcKhiForwardingRofRspForwAmAe2GabTransRegTx | read-only | current | AM_AE2GAB_TRANSACTIONS_REG_TX |
| 1.3.6.1.4.1.2272.1.85.11.21.1.50 | ColumnrcKhiForwardingRofRspForwAmAe2GabTransRegRx | read-only | current | AM_AE2GAB_TRANSACTIONS_REG_RX |
| 1.3.6.1.4.1.2272.1.85.11.21.1.51 | ColumnrcKhiForwardingRofRspForwAmAe3GabTransRegTx | read-only | current | AM_AE3GAB_TRANSACTIONS_REG_TX |
| 1.3.6.1.4.1.2272.1.85.11.21.1.52 | ColumnrcKhiForwardingRofRspForwAmAe3GabTransRegRx | read-only | current | AM_AE3GAB_TRANSACTIONS_REG_RX |
| 1.3.6.1.4.1.2272.1.85.11.21.1.53 | ColumnrcKhiForwardingRofRspForwAmR6Le0GabTransRegTx | read-only | current | AM_R6LE0GAB_TRANSACTIONS_REG_TX |
| 1.3.6.1.4.1.2272.1.85.11.21.1.54 | ColumnrcKhiForwardingRofRspForwAmR6Le0GabTransRegRx | read-only | current | AM_R6LE0GAB_TRANSACTIONS_REG_RX |
| 1.3.6.1.4.1.2272.1.85.11.21.1.55 | ColumnrcKhiForwardingRofRspForwAmR6Le1GabTransRegTx | read-only | current | AM_R6LE1GAB_TRANSACTIONS_REG_TX |
| 1.3.6.1.4.1.2272.1.85.11.21.1.56 | ColumnrcKhiForwardingRofRspForwAmR6Le1GabTransRegRx | read-only | current | AM_R6LE1GAB_TRANSACTIONS_REG_RX |
| 1.3.6.1.4.1.2272.1.85.11.21.1.57 | ColumnrcKhiForwardingRofRspForwAmR6Le2GabTransRegTx | read-only | current | AM_R6LE2GAB_TRANSACTIONS_REG_TX |
| 1.3.6.1.4.1.2272.1.85.11.21.1.58 | ColumnrcKhiForwardingRofRspForwAmR6Le2GabTransRegRx | read-only | current | AM_R6LE2GAB_TRANSACTIONS_REG_RX |
| 1.3.6.1.4.1.2272.1.85.11.21.1.59 | ColumnrcKhiForwardingRofRspForwAmR6Le3GabTransRegTx | read-only | current | AM_R6LE3GAB_TRANSACTIONS_REG_TX |
| 1.3.6.1.4.1.2272.1.85.11.21.1.60 | ColumnrcKhiForwardingRofRspForwAmR6Le3GabTransRegRx | read-only | current | AM_R6LE3GAB_TRANSACTIONS_REG_RX |
| 1.3.6.1.4.1.2272.1.85.11.21.1.61 | ColumnrcKhiForwardingRofRspForwAmR5LeGabTransRegTx | read-only | current | AM_R5LEGAB_TRANSACTIONS_REG_TX |
| 1.3.6.1.4.1.2272.1.85.11.21.1.62 | ColumnrcKhiForwardingRofRspForwAmR5LeGabTransRegRx | read-only | current | AM_R5LEGAB_TRANSACTIONS_REG_RX |
| 1.3.6.1.4.1.2272.1.85.11.21.1.63 | ColumnrcKhiForwardingRofRspForwAmCifGabTransRegTx | read-only | current | AM_CIFGAB_TRANSACTIONS_REG_TX |
| 1.3.6.1.4.1.2272.1.85.11.21.1.64 | ColumnrcKhiForwardingRofRspForwAmCifGabTransRegRx | read-only | current | AM_CIFGAB_TRANSACTIONS_REG_RX |
| 1.3.6.1.4.1.2272.1.85.11.21.1.65 | ColumnrcKhiForwardingRofRspForwAmAlseGabTransRegTx | read-only | current | AM_ALSEGAB_TRANSACTIONS_REG_TX |
| 1.3.6.1.4.1.2272.1.85.11.21.1.66 | ColumnrcKhiForwardingRofRspForwAmAlseGabTransRegRx | read-only | current | AM_ALSEGAB_TRANSACTIONS_REG_RX |
| 1.3.6.1.4.1.2272.1.85.11.21.1.67 | ColumnrcKhiForwardingRofRspForwAmHle0GabTransRegTx | read-only | current | AM_HLE0GAB_TRANSACTIONS_REG_TX |
| 1.3.6.1.4.1.2272.1.85.11.21.1.68 | ColumnrcKhiForwardingRofRspForwAmHle0GabTransRegRx | read-only | current | AM_HLE0GAB_TRANSACTIONS_REG_RX |
| 1.3.6.1.4.1.2272.1.85.11.22 | TablercKhiForwardingRofRspDropTable | not-accessible | current | Drop RSP Stats Key Health Indicator MIB for RoF. |
| 1.3.6.1.4.1.2272.1.85.11.22.1 | RowrcKhiForwardingRofRspDropEntry | not-accessible | current | Forwarding RSP Stats KHI - RoF. |
| 1.3.6.1.4.1.2272.1.85.11.22.1.1 | ColumnrcKhiForwardingRofRspDropSlot | not-accessible | current | Slot Number |
| 1.3.6.1.4.1.2272.1.85.11.22.1.2 | ColumnrcKhiForwardingRofRspDropSlice | not-accessible | current | Slice Number |
| 1.3.6.1.4.1.2272.1.85.11.22.1.3 | ColumnrcKhiForwardingRofRspDropReg | not-accessible | current | Reg |
| 1.3.6.1.4.1.2272.1.85.11.22.1.4 | ColumnrcKhiForwardingRofRspDropHab0RxErrCounterReg | read-only | current | HAB0_RX_ERROR_COUNTER_REG |
| 1.3.6.1.4.1.2272.1.85.11.22.1.5 | ColumnrcKhiForwardingRofRspDropHab1RxErrCounterReg | read-only | current | HAB1_RX_ERROR_COUNTER_REG |
| 1.3.6.1.4.1.2272.1.85.11.22.1.6 | ColumnrcKhiForwardingRofRspDropCif0RxErrCounterReg | read-only | current | CIF0_RX_ERROR_COUNTER_REG |
| 1.3.6.1.4.1.2272.1.85.11.22.1.7 | ColumnrcKhiForwardingRofRspDropCif1RxErrCounterReg | read-only | current | CIF1_RX_ERROR_COUNTER_REG |
| 1.3.6.1.4.1.2272.1.85.11.22.1.8 | ColumnrcKhiForwardingRofRspDropGsFloodingMeterRead | read-only | current | GS_FLOODING_METER_RED |
| 1.3.6.1.4.1.2272.1.85.11.22.1.9 | ColumnrcKhiForwardingRofRspDropGsMacLkupErrDA | read-only | current | GS_MAC_LKUP_ERR_DA |
| 1.3.6.1.4.1.2272.1.85.11.22.1.10 | ColumnrcKhiForwardingRofRspDropGsFilterActDeny | read-only | current | GS_FILTER_ACT_DENY |
| 1.3.6.1.4.1.2272.1.85.11.22.1.11 | ColumnrcKhiForwardingRofRspDropGsIstDstNni | read-only | current | GS_IST_DST_NNI |
| 1.3.6.1.4.1.2272.1.85.11.22.1.12 | ColumnrcKhiForwardingRofRspDropGsSrcMacLkup | read-only | current | GS_SRC_MAC_LKUP |
| 1.3.6.1.4.1.2272.1.85.11.22.1.13 | ColumnrcKhiForwardingRofRspDropGsUnknownSA | read-only | current | GS_UNKNOWN_SA |
| 1.3.6.1.4.1.2272.1.85.11.22.1.14 | ColumnrcKhiForwardingRofRspDropGsDstMacLkup | read-only | current | GS_DST_MAC_LKUP |
| 1.3.6.1.4.1.2272.1.85.11.22.1.15 | ColumnrcKhiForwardingRofRspDropGsSrcKnockOut | read-only | current | GS_SRC_KNOCK_OUT |
| 1.3.6.1.4.1.2272.1.85.11.22.1.16 | ColumnrcKhiForwardingRofRspDropGsNoUniNniMem | read-only | current | GS_NO_UNI_NNI_MEM |
| 1.3.6.1.4.1.2272.1.85.11.22.1.17 | ColumnrcKhiForwardingRofRspDropGsIstNoUniMem | read-only | current | GS_IST_NO_UNI_MEM |
| 1.3.6.1.4.1.2272.1.85.11.22.1.18 | ColumnrcKhiForwardingRofRspDropGsCidDiscard | read-only | current | GS_CID_DISCARD |
| 1.3.6.1.4.1.2272.1.85.11.22.1.19 | ColumnrcKhiForwardingRofRspDropGsLrnDisableUnkwnSA | read-only | current | GS_LRN_DISABLE_UNKWN_SA |
| 1.3.6.1.4.1.2272.1.85.11.22.1.20 | ColumnrcKhiForwardingRofRspDropGsInstMemParityExp | read-only | current | GS_INST_MEM_PARITY_EXP |
| 1.3.6.1.4.1.2272.1.85.11.22.1.21 | ColumnrcKhiForwardingRofRspDropGsPcOver4095Exp | read-only | current | GS_PC_OVER_4095_EXP |
| 1.3.6.1.4.1.2272.1.85.11.22.1.22 | ColumnrcKhiForwardingRofRspDropGsPackletActiveExp | read-only | current | GS_PACKLET_ACTIVE_EXP |
| 1.3.6.1.4.1.2272.1.85.11.22.1.23 | ColumnrcKhiForwardingRofRspDropGsNonAlignedAddrExp | read-only | current | GS_NON_ALIGNED_ADDR_EXP |
| 1.3.6.1.4.1.2272.1.85.11.22.1.24 | ColumnrcKhiForwardingRofRspDropGsIllegalRegionExp | read-only | current | GS_ILLEGAL_REGION_EXP |
| 1.3.6.1.4.1.2272.1.85.11.22.1.25 | ColumnrcKhiForwardingRofRspDropGsSplitOperActiveExp | read-only | current | GS_SPLIT_OPER_ACTIVE_EXP |
| 1.3.6.1.4.1.2272.1.85.11.22.1.26 | ColumnrcKhiForwardingRofRspDropGsSplitOperNotDoneExp | read-only | current | GS_SPLIT_OPER_NOT_DONE_EXP |
| 1.3.6.1.4.1.2272.1.85.11.22.1.27 | ColumnrcKhiForwardingRofRspDropGsGabTimeoutExp | read-only | current | GS_GAB_TIMEOUT_EXP |
| 1.3.6.1.4.1.2272.1.85.11.22.1.28 | ColumnrcKhiForwardingRofRspDropGsInvalidOptypeExp | read-only | current | GS_INVALID_OPTYPE_EXP |
| 1.3.6.1.4.1.2272.1.85.11.22.1.29 | ColumnrcKhiForwardingRofRspDropGsIllegalArgExp | read-only | current | GS_ILLEGAL_ARG_EXP |
| 1.3.6.1.4.1.2272.1.85.11.22.1.30 | ColumnrcKhiForwardingRofRspDropGsEccErrorExp | read-only | current | GS_ECC_ERROR_EXP |
| 1.3.6.1.4.1.2272.1.85.11.22.1.31 | ColumnrcKhiForwardingRofRspDropGsSearchError | read-only | current | GS_SERCH_ERROR |
| 1.3.6.1.4.1.2272.1.85.11.22.1.32 | ColumnrcKhiForwardingRofRspDropGsRadixSearchRunOnExp | read-only | current | GS_RADIX_SEARCH_RUN_ON_EXP |
| 1.3.6.1.4.1.2272.1.85.11.22.1.33 | ColumnrcKhiForwardingRofRspDropGsSearchMgmtError | read-only | current | GS_SEARCH_MGMT_ERROR |
| 1.3.6.1.4.1.2272.1.85.11.22.1.34 | ColumnrcKhiForwardingRofRspDropGsHwFailureExp | read-only | current | GS_HW_FAILURE_EXP |
| 1.3.6.1.4.1.2272.1.85.11.22.1.35 | ColumnrcKhiForwardingRofRspDropGsDontKnowExp | read-only | current | GS_DONT_KNOW_EXP |
| 1.3.6.1.4.1.2272.1.85.11.22.1.36 | ColumnrcKhiForwardingRofRspDropGsMacLkupErrSA | read-only | current | GS_MAC_LKUP_ERR_SA |
| 1.3.6.1.4.1.2272.1.85.11.22.1.37 | ColumnrcKhiForwardingRofRspDropGsIpv4OcsErr | read-only | current | GS_IPV4_OCS_ERR |
| 1.3.6.1.4.1.2272.1.85.11.22.1.38 | ColumnrcKhiForwardingRofRspDropGsIsidLkupFail | read-only | current | GS_ISID_LKUP_FAIL |
| 1.3.6.1.4.1.2272.1.85.11.22.1.39 | ColumnrcKhiForwardingRofRspDropGsNniDstSpbDrop | read-only | current | GS_NNI_DST_SPB_DROP |
| 1.3.6.1.4.1.2272.1.85.11.22.1.40 | ColumnrcKhiForwardingRofRspDropGsNniIstExtraUniCpy | read-only | current | GS_NNI_IST_EXTRA_UNI_CPY |
| 1.3.6.1.4.1.2272.1.85.11.22.1.41 | ColumnrcKhiForwardingRofRspDropGsNniUnkwNBDA | read-only | current | GS_NNI_UNKNOWN_BDA |
| 1.3.6.1.4.1.2272.1.85.11.22.1.42 | ColumnrcKhiForwardingRofRspDropGsNNiIstDown | read-only | current | GS_NNI_IST_DOWN |
| 1.3.6.1.4.1.2272.1.85.11.22.1.43 | ColumnrcKhiForwardingRofRspDropGsPackletErr | read-only | current | GS_PACKLET_ERR |
| 1.3.6.1.4.1.2272.1.85.11.22.1.44 | ColumnrcKhiForwardingRofRspDropGsIsidLkupMiss | read-only | current | GS_ISID_LKUP_MISS |
| 1.3.6.1.4.1.2272.1.85.11.22.1.45 | ColumnrcKhiForwardingRofRspDropGsNniIstPeerUpBvid2Drop | read-only | current | GS_NNI_IST_PEER_UP_BVID2_DROP |
| 1.3.6.1.4.1.2272.1.85.11.22.1.46 | ColumnrcKhiForwardingRofRspDropGsUnknownMcastBda | read-only | current | GS_UNKNOWN_MCAST_BDA |
| 1.3.6.1.4.1.2272.1.85.11.22.1.47 | ColumnrcKhiForwardingRofRspDropGsNniCfmDrop | read-only | current | GS_NNI_CFM_DROP |
| 1.3.6.1.4.1.2272.1.85.11.22.1.48 | ColumnrcKhiForwardingRofRspDropGsIpNotEnDrop | read-only | current | GS_IP_NOT_EN_DROP |
| 1.3.6.1.4.1.2272.1.85.11.22.1.49 | ColumnrcKhiForwardingRofRspDropGsIpv6LkupFail | read-only | current | GS_IPV6_LKUP_FAIL |
| 1.3.6.1.4.1.2272.1.85.11.22.1.50 | ColumnrcKhiForwardingRofRspDropGsIpv6OcsErr | read-only | current | GS_IPV6_OCS_ERR |
| 1.3.6.1.4.1.2272.1.85.11.22.1.51 | ColumnrcKhiForwardingRofRspDropGsIpmcV4Drop | read-only | current | GS_IPMC_V4_DROP |
| 1.3.6.1.4.1.2272.1.85.11.22.1.52 | ColumnrcKhiForwardingRofRspDropGsV4LkupDrop | read-only | current | GS_V4_LKUP_DROP |
| 1.3.6.1.4.1.2272.1.85.11.23 | TablercKhiForwardingRofRspStatusTable | not-accessible | current | Status RSP Stats Key Health Indicator MIB for RoF. |
| 1.3.6.1.4.1.2272.1.85.11.23.1 | RowrcKhiForwardingRofRspStatusEntry | not-accessible | current | Forwarding RSP Stats KHI - RoF. |
| 1.3.6.1.4.1.2272.1.85.11.23.1.1 | ColumnrcKhiForwardingRofRspStatusSlot | not-accessible | current | Slot Number |
| 1.3.6.1.4.1.2272.1.85.11.23.1.2 | ColumnrcKhiForwardingRofRspStatusSlice | not-accessible | current | Slice Number |
| 1.3.6.1.4.1.2272.1.85.11.23.1.3 | ColumnrcKhiForwardingRofRspStatusReg | not-accessible | current | Reg |
| 1.3.6.1.4.1.2272.1.85.11.23.1.4 | ColumnrcKhiForwardingRofRspStatusDeviceIdReg | read-only | current | DEVICE_ID_REG |
| 1.3.6.1.4.1.2272.1.85.11.23.1.5 | ColumnrcKhiForwardingRofRspStatusPllStatusReg | read-only | current | PLL_STATUS_REG |
| 1.3.6.1.4.1.2272.1.85.11.23.1.6 | ColumnrcKhiForwardingRofRspStatusEdi0StatusReg | read-only | current | EDI0_STATUS_REG |
| 1.3.6.1.4.1.2272.1.85.11.23.1.7 | ColumnrcKhiForwardingRofRspStatusEdi1StatusReg | read-only | current | EDI1_STATUS_REG |
| 1.3.6.1.4.1.2272.1.85.11.23.1.8 | ColumnrcKhiForwardingRofRspStatusEdi2StatusReg | read-only | current | EDI2_STATUS_REG |
| 1.3.6.1.4.1.2272.1.85.11.23.1.9 | ColumnrcKhiForwardingRofRspStatusEdi3StatusReg | read-only | current | EDI3_STATUS_REG |
| 1.3.6.1.4.1.2272.1.85.11.23.1.10 | ColumnrcKhiForwardingRofRspStatusEdi4StatusReg | read-only | current | EDI4_STATUS_REG |
| 1.3.6.1.4.1.2272.1.85.11.23.1.11 | ColumnrcKhiForwardingRofRspStatusEdi5StatusReg | read-only | current | EDI5_STATUS_REG |
| 1.3.6.1.4.1.2272.1.85.11.23.1.12 | ColumnrcKhiForwardingRofRspStatusAeStatusReg | read-only | current | AE_STATUS_REG |
| 1.3.6.1.4.1.2272.1.85.11.23.1.13 | ColumnrcKhiForwardingRofRspStatusAlse0StatusReg | read-only | current | ALSE0_STATUS_REG |
| 1.3.6.1.4.1.2272.1.85.11.23.1.14 | ColumnrcKhiForwardingRofRspStatusHab0StatusReg | read-only | current | HAB0_STATUS_REG |
| 1.3.6.1.4.1.2272.1.85.11.23.1.15 | ColumnrcKhiForwardingRofRspStatusHab1StatusReg | read-only | current | HAB1_STATUS_REG |
| 1.3.6.1.4.1.2272.1.85.11.23.1.16 | ColumnrcKhiForwardingRofRspStatusCif0StatusReg | read-only | current | CIF0_STATUS_REG |
| 1.3.6.1.4.1.2272.1.85.11.23.1.17 | ColumnrcKhiForwardingRofRspStatusCif1StatusReg | read-only | current | CIF1_STATUS_REG |
| 1.3.6.1.4.1.2272.1.85.11.23.1.18 | ColumnrcKhiForwardingRofRspStatusHleStatusReg | read-only | current | HLE_STATUS_REG |
| 1.3.6.1.4.1.2272.1.85.11.23.1.19 | ColumnrcKhiForwardingRofRspStatusPbmStatusReg | read-only | current | PBM_STATUS_REG |
| 1.3.6.1.4.1.2272.1.85.11.23.1.20 | ColumnrcKhiForwardingRofRspStatusSamThreadActive0Reg | read-only | current | SAM_THREAD_ACTIVE0_REG |
| 1.3.6.1.4.1.2272.1.85.11.23.1.21 | ColumnrcKhiForwardingRofRspStatusSamThreadActive1Reg | read-only | current | SAM_THREAD_ACTIVE1_REG |
| 1.3.6.1.4.1.2272.1.85.11.23.1.22 | ColumnrcKhiForwardingRofRspStatusSamThreadActive2Reg | read-only | current | SAM_THREAD_ACTIVE2_REG |
| 1.3.6.1.4.1.2272.1.85.11.23.1.23 | ColumnrcKhiForwardingRofRspStatusSamThreadActive3Reg | read-only | current | SAM_THREAD_ACTIVE3_REG |
| 1.3.6.1.4.1.2272.1.85.11.23.1.24 | ColumnrcKhiForwardingRofRspStatusSamThreadActive4Reg | read-only | current | SAM_THREAD_ACTIVE4_REG |
| 1.3.6.1.4.1.2272.1.85.11.23.1.25 | ColumnrcKhiForwardingRofRspStatusSamThreadActive5Reg | read-only | current | SAM_THREAD_ACTIVE5_REG |
| 1.3.6.1.4.1.2272.1.85.11.23.1.26 | ColumnrcKhiForwardingRofRspStatusSamThreadActive6Reg | read-only | current | SAM_THREAD_ACTIVE6_REG |
| 1.3.6.1.4.1.2272.1.85.11.23.1.27 | ColumnrcKhiForwardingRofRspStatusSamThreadActive7Reg | read-only | current | SAM_THREAD_ACTIVE7_REG |
| 1.3.6.1.4.1.2272.1.85.11.23.1.28 | ColumnrcKhiForwardingRofRspStatusSamThreadCountReg | read-only | current | SAM_THREAD_COUNT_REG |
| 1.3.6.1.4.1.2272.1.85.11.23.1.29 | ColumnrcKhiForwardingRofRspStatusAmPcGabPbmThreadStartsReg | read-only | current | AM_PCGAB_PBM_THREAD_STARTS_REG |
| 1.3.6.1.4.1.2272.1.85.11.23.1.30 | ColumnrcKhiForwardingRofRspStatusAmPcGabBkgrdThreadReg | read-only | current | AM_PCGAB_BACKGROUND_THREAD_REG |
| 1.3.6.1.4.1.2272.1.85.11.23.1.31 | ColumnrcKhiForwardingRofRspStatusAmThreadActiveReg | read-only | current | AM_THREAD_ACTIVE_REG |
| 1.3.6.1.4.1.2272.1.85.11.23.1.32 | ColumnrcKhiForwardingRofRspStatusAmThreadCountReg | read-only | current | AM_THREAD_COUNT_REG |
| 1.3.6.1.4.1.2272.1.85.11.24 | TablercKhiForwardingRofRspErrorTable | not-accessible | current | Status RSP Stats Key Health Indicator MIB for RoF. |
| 1.3.6.1.4.1.2272.1.85.11.24.1 | RowrcKhiForwardingRofRspErrorEntry | not-accessible | current | Forwarding RSP Stats KHI - RoF. |
| 1.3.6.1.4.1.2272.1.85.11.24.1.1 | ColumnrcKhiForwardingRofRspErrorSlot | not-accessible | current | Slot Number |
| 1.3.6.1.4.1.2272.1.85.11.24.1.2 | ColumnrcKhiForwardingRofRspErrorSlice | not-accessible | current | Slice Number |
| 1.3.6.1.4.1.2272.1.85.11.24.1.3 | ColumnrcKhiForwardingRofRspErrorReg | not-accessible | current | Reg |
| 1.3.6.1.4.1.2272.1.85.11.24.1.4 | ColumnrcKhiForwardingRofRspErrorHifErrorStatusReg | read-only | current | HIF_ERROR_STATUS_REG |
| 1.3.6.1.4.1.2272.1.85.11.24.1.5 | ColumnrcKhiForwardingRofRspErrorHab0ErrorStatusReg | read-only | current | HAB0_ERROR_STATUS_REG |
| 1.3.6.1.4.1.2272.1.85.11.24.1.6 | ColumnrcKhiForwardingRofRspErrorHab1ErrorStatusReg | read-only | current | HAB1_ERROR_STATUS_REG |
| 1.3.6.1.4.1.2272.1.85.11.24.1.7 | ColumnrcKhiForwardingRofRspErrorErdi0EccSoftErrorCntReg | read-only | current | ERDI0_ECC_SOFT_ERROR_COUNT_REG |
| 1.3.6.1.4.1.2272.1.85.11.24.1.8 | ColumnrcKhiForwardingRofRspErrorErdi1EccSoftErrorCntReg | read-only | current | ERDI1_ECC_SOFT_ERROR_COUNT_REG |
| 1.3.6.1.4.1.2272.1.85.11.24.1.9 | ColumnrcKhiForwardingRofRspErrorErdi2EccSoftErrorCntReg | read-only | current | ERDI2_ECC_SOFT_ERROR_COUNT_REG |
| 1.3.6.1.4.1.2272.1.85.11.24.1.10 | ColumnrcKhiForwardingRofRspErrorErdi3EccSoftErrorCntReg | read-only | current | ERDI3_ECC_SOFT_ERROR_COUNT_REG |
| 1.3.6.1.4.1.2272.1.85.11.24.1.11 | ColumnrcKhiForwardingRofRspErrorErdi4EccSoftErrorCntReg | read-only | current | ERDI4_ECC_SOFT_ERROR_COUNT_REG |
| 1.3.6.1.4.1.2272.1.85.11.24.1.12 | ColumnrcKhiForwardingRofRspErrorErdi5EccSoftErrorCntReg | read-only | current | ERDI4_ECC_SOFT_ERROR_COUNT_REG |
| 1.3.6.1.4.1.2272.1.85.11.24.1.13 | ColumnrcKhiForwardingRofRspErrorErdi0EccErrorCounterReg | read-only | current | ERDI0_ECC_ERROR_COUNTER_REG |
| 1.3.6.1.4.1.2272.1.85.11.24.1.14 | ColumnrcKhiForwardingRofRspErrorErdi1EccErrorCounterReg | read-only | current | ERDI1_ECC_ERROR_COUNTER_REG |
| 1.3.6.1.4.1.2272.1.85.11.24.1.15 | ColumnrcKhiForwardingRofRspErrorErdi2EccErrorCounterReg | read-only | current | ERDI2_ECC_ERROR_COUNTER_REG |
| 1.3.6.1.4.1.2272.1.85.11.24.1.16 | ColumnrcKhiForwardingRofRspErrorErdi3EccErrorCounterReg | read-only | current | ERDI3_ECC_ERROR_COUNTER_REG |
| 1.3.6.1.4.1.2272.1.85.11.24.1.17 | ColumnrcKhiForwardingRofRspErrorErdi4EccErrorCounterReg | read-only | current | ERDI4_ECC_ERROR_COUNTER_REG |
| 1.3.6.1.4.1.2272.1.85.11.24.1.18 | ColumnrcKhiForwardingRofRspErrorErdi5EccErrorCounterReg | read-only | current | ERDI5_ECC_ERROR_COUNTER_REG |
| 1.3.6.1.4.1.2272.1.85.11.24.1.19 | ColumnrcKhiForwardingRofRspErrorCif0DropInfoReg | read-only | current | CIF0_DROP_INFO_REG |
| 1.3.6.1.4.1.2272.1.85.11.24.1.20 | ColumnrcKhiForwardingRofRspErrorCif1DropInfoReg | read-only | current | CIF1_DROP_INFO_REG |
| 1.3.6.1.4.1.2272.1.85.11.24.1.21 | ColumnrcKhiForwardingRofRspErrorHab0DropInfoReg | read-only | current | HAB0_DROP_INFO_REG |
| 1.3.6.1.4.1.2272.1.85.11.24.1.22 | ColumnrcKhiForwardingRofRspErrorHab1DropInfoReg | read-only | current | HAB1_DROP_INFO_REG |
| 1.3.6.1.4.1.2272.1.85.12 | NodercKhiCpp | |||
| 1.3.6.1.4.1.2272.1.85.12.1 | ScalarrcKhiCppPortStatsClear | read-write | current | Clear Khi Cpp Port Statistics MIB - All VSP Data. |
| 1.3.6.1.4.1.2272.1.85.12.2 | ScalarrcKhiCppIoCopStatsClear | read-write | current | Clear Khi Cpp Slot Statistics MIB - All VSP Data. |
| 1.3.6.1.4.1.2272.1.85.12.3 | TablercKhiCppPortStatsTable | not-accessible | current | Khi Cpp Port Statistics MIB - All VSP Data. |
| 1.3.6.1.4.1.2272.1.85.12.3.1 | RowrcKhiCppPortStatsEntry | not-accessible | current | Khi Cpp Port Statistics - VSP table entry. |
| 1.3.6.1.4.1.2272.1.85.12.3.1.1 | ColumnrcKhiCppPortStatsPort | not-accessible | current | Port Number-this entry contains information about packet type, count of Rx and Tx packet |
| 1.3.6.1.4.1.2272.1.85.12.3.1.2 | ColumnrcKhiCppPortStatsPacket | not-accessible | current | Packet Type |
| 1.3.6.1.4.1.2272.1.85.12.3.1.3 | ColumnrcKhiCppPortStatsPacketName | read-only | current | Name of the Packet |
| 1.3.6.1.4.1.2272.1.85.12.3.1.4 | ColumnrcKhiCppPortStatsRxPackets | read-only | current | Rx count for a particular Packet Type |
| 1.3.6.1.4.1.2272.1.85.12.3.1.5 | ColumnrcKhiCppPortStatsTxPackets | read-only | current | Tx count for a particular Packet Type |
| 1.3.6.1.4.1.2272.1.85.12.4 | TablercKhiCppIoCopStatsTable | not-accessible | current | Khi Cpp IoCop Statistics MIB - All VSP Data. |
| 1.3.6.1.4.1.2272.1.85.12.4.1 | RowrcKhiCppIoCopStatsEntry | not-accessible | current | Khi Cpp IoCop Statistics - VSP table entry. |
| 1.3.6.1.4.1.2272.1.85.12.4.1.1 | ColumnrcKhiCppIoCopStatsSlot | not-accessible | current | Slot Number |
| 1.3.6.1.4.1.2272.1.85.12.4.1.2 | ColumnrcKhiCppIoCopStatsMacMgmtRxPackets | read-only | current | MacMgmt Rx Packets |
| 1.3.6.1.4.1.2272.1.85.12.4.1.3 | ColumnrcKhiCppIoCopStatsIpFixRxPackets | read-only | current | IpFix Rx Packets |
| 1.3.6.1.4.1.2272.1.85.12.5 | NodercKhiCppProtocolDrops | |||
| 1.3.6.1.4.1.2272.1.85.12.5.1 | ScalarrcKhiCppProtocolDropsClear | read-write | current | Clear all protocol drop counters |
| 1.3.6.1.4.1.2272.1.85.12.5.2 | ScalarrcKhiCppProtocolDropsDataExpCnt | read-only | current | Data Exp Drop Counter |
| 1.3.6.1.4.1.2272.1.85.12.5.3 | ScalarrcKhiCppProtocolDropsTtlExpCnt | read-only | current | Ttl Exp Drop Counter |
| 1.3.6.1.4.1.2272.1.85.12.5.4 | ScalarrcKhiCppProtocolDropsIpmcDataCnt | read-only | current | Ipmc Data Drop Counter |
| 1.3.6.1.4.1.2272.1.85.12.5.5 | ScalarrcKhiCppProtocolDropsMacLearningCnt | read-only | current | Mac learning Drop Counter |
| 1.3.6.1.4.1.2272.1.85.12.5.6 | ScalarrcKhiCppProtocolDropsIsIsCnt | read-only | current | IsIs Drop Counter |
| 1.3.6.1.4.1.2272.1.85.12.5.7 | ScalarrcKhiCppProtocolDropsBgpCnt | read-only | current | Bgp Drop Counter |
| 1.3.6.1.4.1.2272.1.85.12.5.8 | ScalarrcKhiCppProtocolDropsRipV1Cnt | read-only | current | RipV1 Drop Counter |
| 1.3.6.1.4.1.2272.1.85.12.5.9 | ScalarrcKhiCppProtocolDropsRipV2Cnt | read-only | current | RipV2 Drop Counter |
| 1.3.6.1.4.1.2272.1.85.12.5.10 | ScalarrcKhiCppProtocolDropsOspfMcCnt | read-only | current | Ospf Mc Drop Counter |
| 1.3.6.1.4.1.2272.1.85.12.5.11 | ScalarrcKhiCppProtocolDropsFtpCnt | read-only | current | Ftp Drop Counter |
| 1.3.6.1.4.1.2272.1.85.12.5.12 | ScalarrcKhiCppProtocolDropsTftpCnt | read-only | current | Tftp Drop Counter |
| 1.3.6.1.4.1.2272.1.85.12.5.13 | ScalarrcKhiCppProtocolDropsSnmpCnt | read-only | current | Snmp Drop Counter |
| 1.3.6.1.4.1.2272.1.85.12.5.14 | ScalarrcKhiCppProtocolDropsTelnetCnt | read-only | current | Telnet Drop Counter |
| 1.3.6.1.4.1.2272.1.85.12.5.15 | ScalarrcKhiCppProtocolDropsSshCnt | read-only | current | Ssh Drop Counter |
| 1.3.6.1.4.1.2272.1.85.12.5.16 | ScalarrcKhiCppProtocolDropsRshCnt | read-only | current | Rsh Drop Counter |
| 1.3.6.1.4.1.2272.1.85.12.5.17 | ScalarrcKhiCppProtocolDropsIstCtlCnt | read-only | current | IstCtl Drop Counter |
| 1.3.6.1.4.1.2272.1.85.12.5.18 | ScalarrcKhiCppProtocolDropsRadiusCnt | read-only | current | Radius Drop Counter |
| 1.3.6.1.4.1.2272.1.85.12.5.19 | ScalarrcKhiCppProtocolDropsNtpCnt | read-only | current | Ntp Drop Counter |
| 1.3.6.1.4.1.2272.1.85.12.5.20 | ScalarrcKhiCppProtocolDropsDhcpCnt | read-only | current | Dhcp Drop Counter |
| 1.3.6.1.4.1.2272.1.85.12.5.21 | ScalarrcKhiCppProtocolDropsIcmpV4Cnt | read-only | current | IcmpV4 Drop Counter |
| 1.3.6.1.4.1.2272.1.85.12.5.22 | ScalarrcKhiCppProtocolDropsIcmpV6Cnt | read-only | deprecated | IcmpV6 Drop Counter |
| 1.3.6.1.4.1.2272.1.85.12.5.23 | ScalarrcKhiCppProtocolDropsIgmpCnt | read-only | current | Igmp Drop Counter |
| 1.3.6.1.4.1.2272.1.85.12.5.24 | ScalarrcKhiCppProtocolDropsPimMcCnt | read-only | current | Pim Mc Drop Counter |
| 1.3.6.1.4.1.2272.1.85.12.5.25 | ScalarrcKhiCppProtocolDropsVrrpCnt | read-only | current | Vrrp Drop Counter |
| 1.3.6.1.4.1.2272.1.85.12.5.26 | ScalarrcKhiCppProtocolDropsArpReqCnt | read-only | current | Arp Req Drop Counter |
| 1.3.6.1.4.1.2272.1.85.12.5.27 | ScalarrcKhiCppProtocolDropsArpOtherCnt | read-only | current | Arp Other Drop Counter |
| 1.3.6.1.4.1.2272.1.85.12.5.28 | ScalarrcKhiCppProtocolDropsRarpReqCnt | read-only | current | Rarp Req Drop Counter |
| 1.3.6.1.4.1.2272.1.85.12.5.29 | ScalarrcKhiCppProtocolDropsRarpOtherCnt | read-only | current | Rarp Other Drop Counter |
| 1.3.6.1.4.1.2272.1.85.12.5.30 | ScalarrcKhiCppProtocolDropsSlppCnt | read-only | current | Slpp Drop Counter |
| 1.3.6.1.4.1.2272.1.85.12.5.31 | ScalarrcKhiCppProtocolDropsBpduCnt | read-only | current | Bpdu Drop Counter |
| 1.3.6.1.4.1.2272.1.85.12.5.32 | ScalarrcKhiCppProtocolDropsTdpCnt | read-only | current | Tdp Drop Counter |
| 1.3.6.1.4.1.2272.1.85.12.5.33 | ScalarrcKhiCppProtocolDropsEapCnt | read-only | current | Eap Drop Counter |
| 1.3.6.1.4.1.2272.1.85.12.5.34 | ScalarrcKhiCppProtocolDropsLacpCnt | read-only | current | Lacp Drop Counter |
| 1.3.6.1.4.1.2272.1.85.12.5.35 | ScalarrcKhiCppProtocolDropsVlacpCnt | read-only | current | Vlacp Drop Counter |
| 1.3.6.1.4.1.2272.1.85.12.5.36 | ScalarrcKhiCppProtocolDropsMldV2Cnt | read-only | current | Mld V2 Drop Counter |
| 1.3.6.1.4.1.2272.1.85.12.5.37 | ScalarrcKhiCppProtocolDropsLldpCnt | read-only | current | Lldp Drop Counter |
| 1.3.6.1.4.1.2272.1.85.12.5.38 | ScalarrcKhiCppProtocolDropsHttpCnt | read-only | current | Http Drop Counter |
| 1.3.6.1.4.1.2272.1.85.12.5.39 | ScalarrcKhiCppProtocolDropsPimUcCnt | read-only | current | Pim Uc Drop Counter |
| 1.3.6.1.4.1.2272.1.85.12.5.40 | ScalarrcKhiCppProtocolDropsOspfUcCnt | read-only | current | Ospf Uc Drop Counter |
| 1.3.6.1.4.1.2272.1.85.12.5.41 | ScalarrcKhiCppProtocolDropsDnsCnt | read-only | current | Dns Drop Counter |
| 1.3.6.1.4.1.2272.1.85.12.5.42 | ScalarrcKhiCppProtocolDropsIcmpBcCnt | read-only | deprecated | Icmp Bc Drop Counter |
| 1.3.6.1.4.1.2272.1.85.12.5.43 | ScalarrcKhiCppProtocolDropsIpfixCnt | read-only | current | Ipfix Drop Counter |
| 1.3.6.1.4.1.2272.1.85.12.5.44 | ScalarrcKhiCppProtocolDropsTestPktCnt | read-only | current | Test Pkt Drop Counter |
| 1.3.6.1.4.1.2272.1.85.12.5.45 | ScalarrcKhiCppProtocolDropsIcmpV4BcCnt | read-only | current | Icmp V4 Bc Drop Counter |
| 1.3.6.1.4.1.2272.1.85.12.5.46 | ScalarrcKhiCppProtocolDropsOspfV6UcCnt | read-only | current | OSPF V6 Uc Drop Counter |
| 1.3.6.1.4.1.2272.1.85.12.5.47 | ScalarrcKhiCppProtocolDropsOspfV6McCnt | read-only | current | OSPF V6 Mc Drop Counter |
| 1.3.6.1.4.1.2272.1.85.12.5.48 | ScalarrcKhiCppProtocolDropsHopByHopCnt | read-only | current | Hop By Hop Drop Counter |
| 1.3.6.1.4.1.2272.1.85.12.5.49 | ScalarrcKhiCppProtocolDropsCfmCnt | read-only | current | CFM Drop Counter |
| 1.3.6.1.4.1.2272.1.85.12.5.50 | ScalarrcKhiCppProtocolDropsRipV6Cnt | read-only | current | RIP V6 Drop Counter |
| 1.3.6.1.4.1.2272.1.85.12.5.51 | ScalarrcKhiCppProtocolDropsVrrpV6Cnt | read-only | current | VRRP V6 Drop Counter |
| 1.3.6.1.4.1.2272.1.85.12.5.52 | ScalarrcKhiCppProtocolDropsNdMcV6Cnt | read-only | current | ND MC V6 Drop Counter |
| 1.3.6.1.4.1.2272.1.85.12.5.53 | ScalarrcKhiCppProtocolDropsNdUcV6Cnt | read-only | current | ND UC V6 Drop Counter |
| 1.3.6.1.4.1.2272.1.85.12.5.54 | ScalarrcKhiCppProtocolDropsIcmpMcV6Cnt | read-only | current | ICMP MC V6 Drop Counter |
| 1.3.6.1.4.1.2272.1.85.12.5.55 | ScalarrcKhiCppProtocolDropsIcmpUcV6Cnt | read-only | current | ICMP UC V6 Drop Counter |
| 1.3.6.1.4.1.2272.1.85.12.5.56 | ScalarrcKhiCppProtocolDropsFragUcV6Cnt | read-only | current | FRAG UC V6 Drop Counter |
| 1.3.6.1.4.1.2272.1.85.12.5.57 | ScalarrcKhiCppProtocolDropsFragMcV6Cnt | read-only | current | FRAG MC V6 Drop Counter |
| 1.3.6.1.4.1.2272.1.85.12.5.58 | ScalarrcKhiCppProtocolDropsRloginCnt | read-only | current | Rlogin Drop Counter |
| 1.3.6.1.4.1.2272.1.85.12.5.59 | ScalarrcKhiCppProtocolDropsIngressOAMCnt | read-only | current | Ingress OAM Drop Counter |
| 1.3.6.1.4.1.2272.1.85.12.5.60 | ScalarrcKhiCppProtocolDropsEgressOAMCnt | read-only | current | Egress OAM Drop Counter |
| 1.3.6.1.4.1.2272.1.85.13 | NodercKhiMonitoring | |||
| 1.3.6.1.4.1.2272.1.85.13.1 | TablercKhiMonitoringTable | not-accessible | current | Khi monitoring Data |
| 1.3.6.1.4.1.2272.1.85.13.1.1 | RowrcKhiMonitoringEntry | not-accessible | current | Khi Monitoring line card entry. |
| 1.3.6.1.4.1.2272.1.85.13.1.1.1 | ColumnrcKhiMonitoringSlot | not-accessible | current | An unique index used to identify a particular slot of line card in the system. |
| 1.3.6.1.4.1.2272.1.85.13.1.1.2 | ColumnrcKhiMonitoringAMRXErrThreshold | read-write | current | AM RX error threshold. |
| 1.3.6.1.4.1.2272.1.85.13.1.1.3 | ColumnrcKhiMonitoringAMShortPktErrThreshold | read-write | current | AM Short packet error threshold. |
| 1.3.6.1.4.1.2272.1.85.13.1.1.4 | ColumnrcKhiMonitoringAMExpPktThreshold | read-write | current | AM Exp Packet threshold. |
| 1.3.6.1.4.1.2272.1.85.13.1.1.5 | ColumnrcKhiMonitoringAMCongestionDropThreshold | read-write | current | AM Congestion Drop threshold. |
| 1.3.6.1.4.1.2272.1.85.13.1.1.6 | ColumnrcKhiMonitoringAMProcErrThreshold | read-write | current | AM proc Error. |
| 1.3.6.1.4.1.2272.1.85.13.1.1.7 | ColumnrcKhiMonitoringPMProcErrThreshold | read-write | current | PM proc Error. |
| 1.3.6.1.4.1.2272.1.85.13.1.1.8 | ColumnrcKhiMonitoringFabricDropsThreshold | read-write | current | Fabric drops. |
| 1.3.6.1.4.1.2272.1.85.13.1.1.9 | ColumnrcKhiMonitoringPoliceDropsThreshold | read-write | current | Police Drops. |
| 1.3.6.1.4.1.2272.1.85.13.1.1.10 | ColumnrcKhiMonitoringFoqDropsThreshold | read-write | current | Foq Drops. |
| 1.3.6.1.4.1.2272.1.85.13.1.1.11 | ColumnrcKhiMonitoringLegacyDropsThreshold | read-write | current | Legacy Drops. |
| 1.3.6.1.4.1.2272.1.85.14 | NodercKhiFeOna | |||
| 1.3.6.1.4.1.2272.1.85.14.1 | NodercKhiFeOnaGlobal | |||
| 1.3.6.1.4.1.2272.1.85.14.1.1 | ScalarrcKhiFeOnaGlobalDevPort | read-only | current | Displays the port number of the 4k device to which the Device Port of ONA is connected |
| 1.3.6.1.4.1.2272.1.85.14.1.2 | ScalarrcKhiFeOnaGlobalDevPortStatus | read-only | current | Displays ONA Device Port Status if value=TRUE Status = UP if value=FALSE Status = DOWN |
| 1.3.6.1.4.1.2272.1.85.14.1.3 | ScalarrcKhiFeOnaGlobalLldpPortStatus | read-only | current | Displays LLDP Status On ONA Device port if value=TRUE Status = Enabled if value=FALSE Status = Disabled |
| 1.3.6.1.4.1.2272.1.85.14.1.4 | ScalarrcKhiFeOnaGlobalMgmtIp | read-only | current | Displays ONA Management IP |
| 1.3.6.1.4.1.2272.1.85.14.1.5 | ScalarrcKhiFeOnaGlobalTunnelSourceIp | read-only | current | Displays Tunnel Source IP Address |
| 1.3.6.1.4.1.2272.1.85.14.1.6 | ScalarrcKhiFeOnaGlobalMTU | read-only | current | Displays Tunnel MTU |
| 1.3.6.1.4.1.2272.1.85.14.1.7 | ScalarrcKhiFeOnaGlobalDevStatus | read-only | current | Displays ONA Device Status if value=TRUE Status = UP if value=FALSE Status = DOWN |
| 1.3.6.1.4.1.2272.1.85.14.1.8 | ScalarrcKhiFeOnaGlobalNetPort | read-only | current | Displays the port number of the 4k device to which the Network Port of ONA is connected |
| 1.3.6.1.4.1.2272.1.85.14.1.9 | ScalarrcKhiFeOnaGlobalMacAddr | read-only | current | Displays ONA MAC(ARP) Address |
| 1.3.6.1.4.1.2272.1.85.14.1.10 | ScalarrcKhiFeOnaGlobalMgmtVlan | read-only | current | Displays ONA Management Vlan Id |
| 1.3.6.1.4.1.2272.1.85.14.1.11 | ScalarrcKhiFeOnaGlobalMgmtVlanIp | read-only | current | Displays ONA Management Vlan IP(Configured on 4K) |
| 1.3.6.1.4.1.2272.1.85.14.1.12 | ScalarrcKhiFeOnaGlobalGatewayIp | read-only | current | Displays ONA Gateway IP (As Discovered by ONA ) |
| 1.3.6.1.4.1.2272.1.85.14.1.13 | ScalarrcKhiFeOnaGlobalMgmtIpMask | read-only | current | Displays ONA Management IP Mask (Obtained From ONA) |
| 1.3.6.1.4.1.2272.1.85.14.1.14 | ScalarrcKhiFeOnaGlobalBootMode | read-only | current | Displays ONA Bootmode (Obtained from ONA) |
| 1.3.6.1.4.1.2272.1.85.14.1.15 | ScalarrcKhiFeOnaGlobalUpTime | read-only | current | Displays the ONA Uptime |
| 1.3.6.1.4.1.2272.1.85.14.1.16 | ScalarrcKhiFeOnaGlobalPbitToDscpMap | read-only | current | Displays Port bit To Dscp Map i.e Pbit To Dscp Map : p0=0 p1=0 p2=10 p3=18 p4=26 p5=34 p6=46 p7=46 |
| 1.3.6.1.4.1.2272.1.85.14.1.17 | ScalarrcKhiFeOnaGlobalVrf | read-only | current | Displays the Vrf Name if Vrf is configured |
| 1.3.6.1.4.1.2272.1.85.14.2 | NodercKhiFeOnaStatus | |||
| 1.3.6.1.4.1.2272.1.85.14.2.1 | ScalarrcKhiFeOnaStatusDevice | read-only | current | Displays ONA Device Status if value=TRUE Status = UP if value=FALSE Status = DOWN |
| 1.3.6.1.4.1.2272.1.85.14.2.2 | ScalarrcKhiFeOnaStatusDownReason | read-only | current | Displays ONA Down Reason if ONA Device Status is down |
| 1.3.6.1.4.1.2272.1.85.14.2.3 | ScalarrcKhiFeOnaStatusRunRelease | read-only | current | Displays Running Release Name |
| 1.3.6.1.4.1.2272.1.85.14.2.4 | ScalarrcKhiFeOnaStatusImageUpgradeStatus | read-only | current | Displays Image Upgrade Status |
| 1.3.6.1.4.1.2272.1.85.14.2.5 | ScalarrcKhiFeOnaStatusImageFileUsed | read-only | current | Displays Image File Used For Upgrade |
| 1.3.6.1.4.1.2272.1.86 | NodercIke | |||
| 1.3.6.1.4.1.2272.1.86.1 | TablercIkeProfileTable | not-accessible | current | This table contains a list of profiles consisting of algorithms and other configuration that can be used during an IKE Phase 1 connection. |
| 1.3.6.1.4.1.2272.1.86.1.1 | RowrcIkeProfileEntry | not-accessible | current | An entry containing configuration information for authentication algorithms, encryption algorithms, Diffie-Helman group, exchange-mode and lifetime-seconds to … |
| 1.3.6.1.4.1.2272.1.86.1.1.1 | ColumnrcIkeProfileName | not-accessible | current | This object contains the name of this Profile. |
| 1.3.6.1.4.1.2272.1.86.1.1.2 | ColumnrcIkeProfileHashAlgorithm | read-create | current | This object specifies the hash algorithms that can be used during IKE Phase 1 SA negotiation. |
| 1.3.6.1.4.1.2272.1.86.1.1.3 | ColumnrcIkeProfileEncryptionAlgorithm | read-create | current | This object specifies the encryption algorithms that can be used during IKE Phase 1 SA negotiation. |
| 1.3.6.1.4.1.2272.1.86.1.1.4 | ColumnrcIkeProfileEncryptKeyLen | read-create | current | This object specifies the key length that should be be used during IKE Phase 1 SA negotiation. |
| 1.3.6.1.4.1.2272.1.86.1.1.5 | ColumnrcIkeProfileDHGroup | read-create | current | This object specifies the Diffie-Hellman groups that can be used during IKE Phase 1 SA negotiation. |
| 1.3.6.1.4.1.2272.1.86.1.1.6 | ColumnrcIkeProfileExchangeMode | read-create | current | This object specifies the IKE Phase 1 negotiation mode. Only main mode is supported for this release. |
| 1.3.6.1.4.1.2272.1.86.1.1.7 | ColumnrcIkeProfileLifetimeSeconds | read-create | current | This object specifies the amount of time to propose an IKE Phase 1 SA remain valid during IKE Phase 1 negotiation. A value of 0 means no expiration. |
| 1.3.6.1.4.1.2272.1.86.1.1.8 | ColumnrcIkeProfileRowStatus | read-create | current | This object is used to create or delete entries in this table. |
| 1.3.6.1.4.1.2272.1.86.2 | TablercIkePolicyTable | not-accessible | current | This table contains a list of IKE Phase 1 policy entries. |
| 1.3.6.1.4.1.2272.1.86.2.1 | RowrcIkePolicyEntry | not-accessible | current | . |
| 1.3.6.1.4.1.2272.1.86.2.1.1 | ColumnrcIkePolicyLocalIfIndex | not-accessible | current | This object specifies the Interface Index of the local address. Only port and vlan if-index are supported for this release. |
| 1.3.6.1.4.1.2272.1.86.2.1.2 | ColumnrcIkePolicyLocalAddrType | not-accessible | current | This object specifies the type of address field in the rcIkePolicyLocalAddr. Only IPv6 address types are supported for this release. |
| 1.3.6.1.4.1.2272.1.86.2.1.3 | ColumnrcIkePolicyLocalAddr | not-accessible | current | This object specifies the string representation of the local peer ID. The type of value configured for this object is specified by the rcIkePolicyLocalAddrType. |
| 1.3.6.1.4.1.2272.1.86.2.1.4 | ColumnrcIkePolicyRemoteAddrType | not-accessible | current | This object specifies the type of address field in the rcIkePolicyRemoteAddr. Only IPv6 address types are supported for this release. |
| 1.3.6.1.4.1.2272.1.86.2.1.5 | ColumnrcIkePolicyRemoteAddr | not-accessible | current | This object specifies the string representation of the remote peer ID. The type of value configured for this object is specified by the rcIkePolicyRemoteAddrTy… |
| 1.3.6.1.4.1.2272.1.86.2.1.6 | ColumnrcIkePolicyName | read-create | current | This object specifies the name given to the policy. The name should be assigned during creation of the policy. Changing the name after the policy is created is… |
| 1.3.6.1.4.1.2272.1.86.2.1.7 | ColumnrcIkePolicyProfileName | read-create | current | This object specifies the name of the profile (rcIkeProfileName) that should be used for this policy. |
| 1.3.6.1.4.1.2272.1.86.2.1.8 | ColumnrcIkePolicyAuthenticationMethod | read-create | current | This object specifies the proposed authentication method for the phase 1 security association. Only the Pre-Shared Key authentication method is supported in th… |
| 1.3.6.1.4.1.2272.1.86.2.1.9 | ColumnrcIkePolicyPSKValue | read-create | current | This object specifies the value of the Pre-Shared Key if the authentication method is set to PSK. |
| 1.3.6.1.4.1.2272.1.86.2.1.10 | ColumnrcIkePolicyDPDTimeout | read-create | current | This object specifies the Dead Peer Detection timeout in seconds. |
| 1.3.6.1.4.1.2272.1.86.2.1.11 | ColumnrcIkePolicyP2PFS | read-create | current | This object specifies whether or not perfect forward secrecy is used when refreshing keys. Enable indicates that PFS SHOULD be used. |
| 1.3.6.1.4.1.2272.1.86.2.1.12 | ColumnrcIkePolicyP2PfsUseIkeGroup | read-create | current | This object specifies whether or not to use the same GroupId (Diffie-Hellman Group) for phase 2 as was used in phase 1. If P2PFS is disabled, this entry SHOULD… |
| 1.3.6.1.4.1.2272.1.86.2.1.13 | ColumnrcIkePolicyP2PfsDHGroup | read-create | current | This object specifies the Diffie-Hellman group to use for phase 2 when the object rcIkePolicyP2PFS is enabled and the object rcIkePolicyP2PfsUseIkeGroup is dis… |
| 1.3.6.1.4.1.2272.1.86.2.1.14 | ColumnrcIkePolicyAdminState | read-create | current | This object specifies whether the policy is administratively enabled or disabled. |
| 1.3.6.1.4.1.2272.1.86.2.1.15 | ColumnrcIkePolicyOperStatus | read-only | current | This object specifies whether the policy is operationally up or down. |
| 1.3.6.1.4.1.2272.1.86.2.1.16 | ColumnrcIkePolicyRowStatus | read-create | current | This object is used to create or delete entries in this table. |
| 1.3.6.1.4.1.2272.1.86.2.1.17 | ColumnrcIkePolicyRevocationCheckMethod | read-create | current | This object specifies the proposed revocation-check method for digital-certificate type authentication-method. |
| 1.3.6.1.4.1.2272.1.86.2.1.18 | ColumnrcIkePolicyProfileVersion | read-create | current | This object maps to the version of ike profile selected. Default value of this object is version 1 (v1) |
| 1.3.6.1.4.1.2272.1.86.2.1.19 | ColumnrcIkePolicyPeerName | read-create | current | This object specifies the value of the Peer name if the authentication method is set to digital certificate. |
| 1.3.6.1.4.1.2272.1.86.4 | TablercIkeActiveSATable | not-accessible | current | This table contains a list of IKE Phase 1 Security Association entries. |
| 1.3.6.1.4.1.2272.1.86.4.1 | RowrcIkeActiveSAEntry | not-accessible | current | . |
| 1.3.6.1.4.1.2272.1.86.4.1.1 | ColumnrcIkeActiveSAId | not-accessible | current | This object specifies the unique ID of a SA |
| 1.3.6.1.4.1.2272.1.86.4.1.2 | ColumnrcIkeActiveSALocalIfIndex | not-accessible | current | This object specifies the interface index of the local address. Only port and vlan if-index are supported for this release. |
| 1.3.6.1.4.1.2272.1.86.4.1.3 | ColumnrcIkeActiveSALocalAddrType | not-accessible | current | This object specifies the type of address field in the rcIkeActiveSALocalAddr. Only IPv6 address types are supported for this release. |
| 1.3.6.1.4.1.2272.1.86.4.1.4 | ColumnrcIkeActiveSALocalAddr | not-accessible | current | This object specifies the string representation of the local peer ID. The type of value configured for this object is specified by the rcIkeActiveSALocalAddrTy… |
| 1.3.6.1.4.1.2272.1.86.4.1.5 | ColumnrcIkeActiveSARemoteAddrType | not-accessible | current | This object specifies the type of address field in the rcIkeActiveSARemoteAddr. Only IPv6 address types are supported for this release. |
| 1.3.6.1.4.1.2272.1.86.4.1.6 | ColumnrcIkeActiveSARemoteAddr | not-accessible | current | This object specifies the string representation of the remote peer ID. The type of value configured for this object is specified by the rcIkeActiveSARemoteAddr… |
| 1.3.6.1.4.1.2272.1.86.4.1.7 | ColumnrcIkeActiveSAName | read-only | current | This object specifies the name for the SA. |
| 1.3.6.1.4.1.2272.1.86.4.1.8 | ColumnrcIkeActiveSAAuthenticationMethod | read-only | current | This object specifies the proposed authentication method for the phase 1 security association. Only the Pre-Shared Key authentication method is supported in th… |
| 1.3.6.1.4.1.2272.1.86.4.1.9 | ColumnrcIkeActiveSADPDTimeout | read-only | current | This object specifies the Dead Peer Detection timeout in seconds. |
| 1.3.6.1.4.1.2272.1.86.4.1.10 | ColumnrcIkeActiveSAHashAlgorithm | read-only | current | This object specifies the hash algorithm negotiated for this IKE Phase 1 SA. |
| 1.3.6.1.4.1.2272.1.86.4.1.11 | ColumnrcIkeActiveSAEncryptionAlgorithm | read-only | current | This object specifies the encryption algorithm negotiated for this IKE Phase 1 SA. |
| 1.3.6.1.4.1.2272.1.86.4.1.12 | ColumnrcIkeActiveSAEncryptKeyLen | read-only | current | This object specifies the encryption key length negotiated for this IKE Phase 1 SA. |
| 1.3.6.1.4.1.2272.1.86.4.1.13 | ColumnrcIkeActiveSADHGroup | read-only | current | This object specifies the Diffie-Hellman group negotiated for this IKE Phase 1 SA. |
| 1.3.6.1.4.1.2272.1.86.4.1.14 | ColumnrcIkeActiveSAExchangeMode | read-only | current | This object specifies the IKE Phase 1 SA mode. |
| 1.3.6.1.4.1.2272.1.86.4.1.15 | ColumnrcIkeActiveSALifetimeSeconds | read-only | current | This object specifies the amount of time to propose an IKE Phase 1 SA remain valid during IKE Phase 1 negotiation. A value of 0 means no expiration. |
| 1.3.6.1.4.1.2272.1.86.4.1.16 | ColumnrcIkeActiveSAStatus | read-only | current | This object specifies the amount of time to propose an IKE Phase 1 SA remain valid during IKE Phase 1 negotiation. A value of 0 means no expiration. |
| 1.3.6.1.4.1.2272.1.86.4.1.17 | ColumnrcIkeActiveSAInitiator | read-only | current | This object specifies the whether the SA was created by an Initiator or a Responder |
| 1.3.6.1.4.1.2272.1.86.5 | TablercIkeV2ProfileTable | not-accessible | current | This table contains a list of Ike v2 profiles consisting of algorithms and other configuration that can be used during an IKE connection. |
| 1.3.6.1.4.1.2272.1.86.5.1 | RowrcIkeV2ProfileEntry | not-accessible | current | An entry containing configuration information for authentication algorithms, encryption algorithms, Diffie-Helman group, exchange-mode and lifetime-seconds to … |
| 1.3.6.1.4.1.2272.1.86.5.1.1 | ColumnrcIkeV2ProfileName | not-accessible | current | This object contains the name of this Profile. |
| 1.3.6.1.4.1.2272.1.86.5.1.2 | ColumnrcIkeV2ProfileHashAlgorithm | read-create | current | This object specifies the hash algorithms that can be used during IKE SA negotiation. It is represented in form of bits as follows- bit 0 - md5 bit 1 - sha bit… |
| 1.3.6.1.4.1.2272.1.86.5.1.3 | ColumnrcIkeV2ProfileEncryptionAlgorithm | read-create | current | This object specifies the encryption algorithms that can be used during IKE SA negotiation. It is represented in form of bits as follows- bit 0 - desCbc bit 1 … |
| 1.3.6.1.4.1.2272.1.86.5.1.4 | ColumnrcIkeV2ProfileEncryptKeyLen | read-create | current | This object specifies the key length that should be be used during IKE SA negotiation. It is represented in form of bits as follows- bit 0 - keylen-128 bit 1 -… |
| 1.3.6.1.4.1.2272.1.86.5.1.5 | ColumnrcIkeV2ProfileDHGroup | read-create | current | This object specifies the Diffie-Hellman groups that can be used during IKE SA negotiation. It is represented in form of bits as follows - bit 0 - modp768 bit … |
| 1.3.6.1.4.1.2272.1.86.5.1.6 | ColumnrcIkeV2ProfileExchangeMode | read-create | current | This object specifies the IKE negotiation mode. Only main mode is supported for this release. |
| 1.3.6.1.4.1.2272.1.86.5.1.7 | ColumnrcIkeV2ProfileLifetimeSeconds | read-create | current | This object specifies the amount of time to propose an IKE SA remain valid during IKE negotiation. A value of 0 means no expiration. |
| 1.3.6.1.4.1.2272.1.86.5.1.8 | ColumnrcIkeV2ProfileIntegrityAlgorithm | read-create | current | This object specifies the integrity algorithms that can be used during IKE SA negotiation. It is represented in form of bits as follows - bit 0 - md5 bit 1 - s… |
| 1.3.6.1.4.1.2272.1.86.5.1.9 | ColumnrcIkeV2ProfileRowStatus | read-create | current | This object is used to create or delete entries in this table. |
| 1.3.6.1.4.1.2272.1.86.6 | TablercIkeV2SATable | not-accessible | current | This table contains a list of IKE V2 Security Association entries. |
| 1.3.6.1.4.1.2272.1.86.6.1 | RowrcIkeV2SAEntry | not-accessible | current | . |
| 1.3.6.1.4.1.2272.1.86.6.1.1 | ColumnrcIkeV2SAId | not-accessible | current | This object specifies the unique ID of a SA |
| 1.3.6.1.4.1.2272.1.86.6.1.2 | ColumnrcIkeV2SALocalIfIndex | not-accessible | current | This object specifies the interface index of the local address. Only port and vlan if-index are supported for this release. |
| 1.3.6.1.4.1.2272.1.86.6.1.3 | ColumnrcIkeV2SALocalAddrType | not-accessible | current | This object specifies the type of address field in the rcIkeActiveSALocalAddr. Only IPv6 address types are supported for this release. |
| 1.3.6.1.4.1.2272.1.86.6.1.4 | ColumnrcIkeV2SALocalAddr | not-accessible | current | This object specifies the string representation of the local peer ID. The type of value configured for this object is specified by the rcIkeV2SALocalAddrType. |
| 1.3.6.1.4.1.2272.1.86.6.1.5 | ColumnrcIkeV2SARemoteAddrType | not-accessible | current | This object specifies the type of address field in the rcIkeV2SARemoteAddr. Only IPv6 address types are supported for this release. |
| 1.3.6.1.4.1.2272.1.86.6.1.6 | ColumnrcIkeV2SARemoteAddr | not-accessible | current | This object specifies the string representation of the remote peer ID. The type of value configured for this object is specified by the rcIkeV2SARemoteAddrType. |
| 1.3.6.1.4.1.2272.1.86.6.1.7 | ColumnrcIkeV2SAName | read-only | current | This object specifies the name for the SA. |
| 1.3.6.1.4.1.2272.1.86.6.1.8 | ColumnrcIkeV2SAAuthenticationMethod | read-only | current | This object specifies the proposed authentication method for the phase 1 security association. Only the Pre-Shared Key authentication method is supported in th… |
| 1.3.6.1.4.1.2272.1.86.6.1.9 | ColumnrcIkeV2SADPDTimeout | read-only | current | This object specifies the Dead Peer Detection timeout in seconds. |
| 1.3.6.1.4.1.2272.1.86.6.1.10 | ColumnrcIkeV2SAHashAlgorithm | read-only | current | This object specifies the hash algorithm negotiated for this IKEv2 SA. |
| 1.3.6.1.4.1.2272.1.86.6.1.11 | ColumnrcIkeV2SAEncryptionAlgorithm | read-only | current | This object specifies the encryption algorithm negotiated for this IKEv2 SA. |
| 1.3.6.1.4.1.2272.1.86.6.1.12 | ColumnrcIkeV2SAEncryptKeyLen | read-only | current | This object specifies the encryption key length negotiated for this IKE V2 SA. |
| 1.3.6.1.4.1.2272.1.86.6.1.13 | ColumnrcIkeV2SADHGroup | read-only | current | This object specifies the Diffie-Hellman group negotiated for this IKE V2 SA. |
| 1.3.6.1.4.1.2272.1.86.6.1.14 | ColumnrcIkeV2SAExchangeMode | read-only | current | This object specifies the IKE V2 SA mode. |
| 1.3.6.1.4.1.2272.1.86.6.1.15 | ColumnrcIkeV2SALifetimeSeconds | read-only | current | This object specifies the amount of time to propose an IKE V2 SA remain valid during IKE negotiation. A value of 0 means no expiration. |
| 1.3.6.1.4.1.2272.1.86.6.1.16 | ColumnrcIkeV2SAStatus | read-only | current | This object specifies the amount of time to propose an IKE V2 SA remain valid during IKE V2 negotiation. A value of 0 means no expiration. |
| 1.3.6.1.4.1.2272.1.86.6.1.17 | ColumnrcIkeV2SAInitiator | read-only | current | This object specifies the whether the SA was created by an Initiator or a Responder |
| 1.3.6.1.4.1.2272.1.86.6.1.18 | ColumnrcIkeV2SAIntegrityAlgorithm | read-only | current | This object specifies the integrity algorithms that can be used during IKEv2 SA negotiation. |
| 1.3.6.1.4.1.2272.1.87 | NodercIsid | |||
| 1.3.6.1.4.1.2272.1.87.1 | ScalarrcIsidNumIsids | read-only | current | The number of i-sids currently defined in the switch. |
| 1.3.6.1.4.1.2272.1.87.2 | TablercIsidServiceTable | not-accessible | current | A list of service instance entries. The number of entries is given by rcIsidNumIsids. |
| 1.3.6.1.4.1.2272.1.87.2.1 | RowrcIsidServiceEntry | not-accessible | current | Entry containing configuration information for a particular Service entry. |
| 1.3.6.1.4.1.2272.1.87.2.1.1 | ColumnrcIsidServiceId | not-accessible | current | A value that uniquely indentifies the service associated with this entry. |
| 1.3.6.1.4.1.2272.1.87.2.1.2 | ColumnrcIsidServiceType | read-create | current | It represents the type of service associated with this entry. |
| 1.3.6.1.4.1.2272.1.87.2.1.3 | ColumnrcIsidServiceRowStatus | read-create | current | Used to create/delete entries in the Table. |
| 1.3.6.1.4.1.2272.1.87.2.1.4 | ColumnrcIsidServiceMacLimitEnable | read-create | current | Controls whether the mac-limit should be enabled. To enable, set this value to true. To disable, set this value to false. |
| 1.3.6.1.4.1.2272.1.87.2.1.5 | ColumnrcIsidServiceMaxMacLimit | read-create | current | A value used to indicate the maximum value of mac- address that can be learnt on a per service(i-sid) basis. |
| 1.3.6.1.4.1.2272.1.87.2.1.6 | ColumnrcIsidServiceAction | read-create | current | I-sid related actions. |
| 1.3.6.1.4.1.2272.1.87.2.1.7 | ColumnrcIsidServiceOrigin | read-only | current | It represents the origin of this isid. |
| 1.3.6.1.4.1.2272.1.87.2.1.8 | ColumnrcIsidServiceVnid | read-only | current | A value that uniquely identifies the vxlan service associated with this entry. |
| 1.3.6.1.4.1.2272.1.87.3 | TablercIsidElanTransparentTable | not-accessible | current | A list of service instance entries of type elan- transparent. This is created by rcIsidServiceEntry. |
| 1.3.6.1.4.1.2272.1.87.3.1 | RowrcIsidElanTransparentEntry | not-accessible | current | Entry containing configuration information for a particular Service entry of type elan-transparent. |
| 1.3.6.1.4.1.2272.1.87.3.1.1 | ColumnrcIsidElanTransparentId | not-accessible | current | A value that uniquely identifies the service already created by rcIsidServiceTable. |
| 1.3.6.1.4.1.2272.1.87.3.1.2 | ColumnrcIsidElanTransparentPortMembers | read-write | current | The set of ports that are members of this service type. |
| 1.3.6.1.4.1.2272.1.87.3.1.3 | ColumnrcIsidElanTransparentMltIds | read-write | current | A set of bits represents the MLT IDs.From left to right, the first bit set represent MltId 1. The second bit set represent MltId 2, and so on so forth, Up to b… |
| 1.3.6.1.4.1.2272.1.87.4 | TablercIsidElanEndPointTable | not-accessible | current | A list of elan end point entries. |
| 1.3.6.1.4.1.2272.1.87.4.1 | RowrcIsidElanEndPointEntry | not-accessible | current | Entry containing configuration information for a particular elan end point. |
| 1.3.6.1.4.1.2272.1.87.4.1.1 | ColumnrcIsidElanEndPointIsid | not-accessible | current | A value that uniquely identifies the i-sid of this elan end point. |
| 1.3.6.1.4.1.2272.1.87.4.1.2 | ColumnrcIsidElanEndPointCvid | not-accessible | current | A value that uniquely identifies the customer vid of this elan end point. 4095 is not used. 4096 is reserved for untagged case |
| 1.3.6.1.4.1.2272.1.87.4.1.3 | ColumnrcIsidElanEndPointIfIndex | not-accessible | current | The interface index for mlt or port of this elan end point. |
| 1.3.6.1.4.1.2272.1.87.4.1.4 | ColumnrcIsidElanEndPointRowStatus | read-create | current | Row status for create/delete. |
| 1.3.6.1.4.1.2272.1.87.4.1.5 | ColumnrcIsidElanEndPointBpdu | read-create | current | set bpdu enable/disable for untagged end point. Disable to drop the bpdu, enable to forward the bpdu. Default is disable. |
| 1.3.6.1.4.1.2272.1.87.4.1.6 | ColumnrcIsidElanEndPointOrigin | read-only | current | It represents the origin of service associated with this isid elan end point. |
| 1.3.6.1.4.1.2272.1.87.5 | TablercIsidInterfaceTable | not-accessible | current | A list of isid interface entries. |
| 1.3.6.1.4.1.2272.1.87.5.1 | RowrcIsidInterfaceEntry | not-accessible | current | Entry containing information for a particular isid interface (port/mlt). |
| 1.3.6.1.4.1.2272.1.87.5.1.1 | ColumnrcIsidInterfaceIfIndex | not-accessible | current | The interface index for this isid interface. |
| 1.3.6.1.4.1.2272.1.87.5.1.2 | ColumnrcIsidInterfaceIsid | not-accessible | current | A value that uniquely identifies the i-sid of this isid interface. |
| 1.3.6.1.4.1.2272.1.87.5.1.3 | ColumnrcIsidInterfaceVlan | read-only | current | A value that uniquely identifies the platform vlan of this isid interface. |
| 1.3.6.1.4.1.2272.1.87.5.1.4 | ColumnrcIsidInterfaceCvid | read-only | current | A value that uniquely identifies the customer vid of this isid interface. 4095 is not used. 4096 is reserved for untagged case |
| 1.3.6.1.4.1.2272.1.87.5.1.5 | ColumnrcIsidInterfaceType | read-only | current | It represents the type of service associated with this isid interface. |
| 1.3.6.1.4.1.2272.1.87.5.1.6 | ColumnrcIsidInterfaceOrigin | read-only | current | It represents the origin of service associated with this isid interface. |
| 1.3.6.1.4.1.2272.1.87.5.1.7 | ColumnrcIsidInterfaceBpdu | read-only | current | It represents bpdu for untagged isid interface. Disable is to drop the bpdu, enable is to forward the bpdu. |
| 1.3.6.1.4.1.2272.1.88 | NodercMACSec | |||
| 1.3.6.1.4.1.2272.1.88.1 | TablercMACSecCATable | not-accessible | current | A Table which describes the Connectivity Associations in a System (VSP 4000/9000) |
| 1.3.6.1.4.1.2272.1.88.1.1 | RowrcMACSecCAEntry | not-accessible | current | A conceptual row of rcMACSec Table |
| 1.3.6.1.4.1.2272.1.88.1.1.1 | ColumnrcMACSecConnectivityAssociationId | not-accessible | current | A unique Id assigned to each connectivity association configured on the switch(VSP 4000/9000). This MIB element is used for internal logic only. |
| 1.3.6.1.4.1.2272.1.88.1.1.2 | ColumnrcMACSecConnectivityAssociationName | read-create | current | A user configured name given to each Connectivity Association configured on the switch |
| 1.3.6.1.4.1.2272.1.88.1.1.3 | ColumnrcMACSecConnectivityAssociationKey | read-create | current | A pre shared, Connectivity Association Key associated with each connectivity association configured on the switch |
| 1.3.6.1.4.1.2272.1.88.1.1.4 | ColumnrcMACSecConnectivityAssociationPortMembers | read-only | current | The set of ports to which this connectivity association is associated with |
| 1.3.6.1.4.1.2272.1.88.1.1.5 | ColumnrcMACSecConnectivityAssociationRowStatus | read-create | current | Used to create and delete conceptual Rows of connectivity associations |
| 1.3.6.1.4.1.2272.1.88.1.1.6 | ColumnrcMACSecConnectivityAssociationTxKeyParity | read-create | current | Use Odd or Even Keys generated while programming in Switch Hardware |
| 1.3.6.1.4.1.2272.1.88.2 | TablercMACSecIfConfigTable | not-accessible | current | Table which provides MACSec Configurations on a per port basis |
| 1.3.6.1.4.1.2272.1.88.2.1 | RowrcMACSecIfConfigEntry | not-accessible | current | Conceptual Row of rcMACSecIfConfigTable |
| 1.3.6.1.4.1.2272.1.88.2.1.1 | ColumnrcMACSecIfCAName | read-write | current | Name of Connectivity Association attached to the port/interface |
| 1.3.6.1.4.1.2272.1.88.2.1.2 | ColumnrcMACSecIfOffsetValue | read-write | current | Using this parameter, Ipv4 + TCP/UDP header or Ipv6 + TCP/UDP header can be Offset from MACSec Encryption |
| 1.3.6.1.4.1.2272.1.88.2.1.3 | ColumnrcMACSecIfEncryptionEnable | read-write | current | Encryption Status per port. Used to Enable/Disable Encryption for each macsec capable port |
| 1.3.6.1.4.1.2272.1.88.2.1.4 | ColumnrcMACSecIfClearStats | read-write | current | Used to clear MACSec stats for a port. This will display always false when retrieved through SNMP Get. |
| 1.3.6.1.4.1.2272.1.100 | Noderc2k | |||
| 1.3.6.1.4.1.2272.1.100.1 | Noderc2kChassis | |||
| 1.3.6.1.4.1.2272.1.100.1.1 | Scalarrc2kChassisPortOperStatus | read-only | current | A bit array that contains the oper-status of the ports in the device. 2 bits are used for each port. The high order 2 bits of the first octet represent port #0… |
| 1.3.6.1.4.1.2272.1.100.1.2 | Scalarrc2kChassisTemperature | read-only | current | Used to indicate the core operating temperature of the chassis. This value represents the degree in celsius of the air inside the chassis. |
| 1.3.6.1.4.1.2272.1.100.1.3 | Scalarrc2kChassisAmbientLowerTemperature | read-only | obsolete | Used to indicate the temperature of the air entering the fan at the lower half of the chassis. |
| 1.3.6.1.4.1.2272.1.100.1.4 | Scalarrc2kChassisAmbientUpperTemperature | read-only | obsolete | Used to indicate the temperature of the air entering the fan at the upper half of the chassis. |
| 1.3.6.1.4.1.2272.1.100.1.5 | Scalarrc2kChassisBaseMacAddr | read-only | current | base mac addr |
| 1.3.6.1.4.1.2272.1.100.1.6 | Scalarrc2kChassisMacAddrCapacity | read-only | current | Mac Address Capacity |
| 1.3.6.1.4.1.2272.1.100.1.7 | Scalarrc2kChassisPbtMacAddr | read-only | current | pbt mac addr |
| 1.3.6.1.4.1.2272.1.100.1.8 | Scalarrc2kChassisUserLabel1 | read-write | current | user defined management information. This can be used to provide extra information about the chassis. Syntax can be as expected by the management system |
| 1.3.6.1.4.1.2272.1.100.1.9 | Scalarrc2kChassisPbtMacAddrList | read-only | current | List of 8 Pbt Mac addresses. The first Pbt Mac Address is rc2kChassisPbtMacAddr. The other 7 Pbt Mac Addresses are derived by increment 1 to the previous mac s… |
| 1.3.6.1.4.1.2272.1.100.1.10 | Scalarrc2kChassisSystemTempLedColor | read-only | current | Used to indicate the led color of the system temperature which is under or above the threshold. The threshold is 60 degree in celsius. 'green' menas normal. An… |
| 1.3.6.1.4.1.2272.1.100.1.11 | Scalarrc2kChassisPortLedStatus | read-only | current | This is applicable only for VSP4K. A bit array that contains the value of port LED status. One octet is used for each port. Each octet contains two nibbles (tw… |
| 1.3.6.1.4.1.2272.1.100.1.12 | Scalarrc2kChassisPortLed2Status | read-only | current | This is applicable only for VSP8200 & VSP8400. Each octet string contains the value of a port LED status. One octet is used for each port. Each octet contains … |
| 1.3.6.1.4.1.2272.1.100.1.13 | Scalarrc2kChassisPortLicenseStatus | read-only | current | This is applicable only for VSP7K. The string is 56 octets long, for a total of 448 bits. Each bit corresponds to a port, as represented by its ifIndex value. … |
| 1.3.6.1.4.1.2272.1.100.1.14 | Scalarrc2kChassisPortLed3Status | read-only | current | This is applicable only for DSG9032 and DSG8064. For DSG9032, each 100G port can operate with 100G pluggable module or channelized to 4 25G sub-ports, or opera… |
| 1.3.6.1.4.1.2272.1.100.2 | Tablerc2kCpuEthernetPortTable | not-accessible | current | 2k CPU Ethernet Port table |
| 1.3.6.1.4.1.2272.1.100.2.1 | Rowrc2kCpuEthernetPortEntry | not-accessible | current | Entry containing information of 2k CPU Ethernet Port |
| 1.3.6.1.4.1.2272.1.100.2.1.1 | Columnrc2kCpuEthernetPortIfIndex | read-only | current | IfIndex of the port. |
| 1.3.6.1.4.1.2272.1.100.2.1.2 | Columnrc2kCpuEthernetPortDescr | read-only | current | Port description |
| 1.3.6.1.4.1.2272.1.100.2.1.3 | Columnrc2kCpuEthernetPortAdminStatus | read-write | current | Used to configure the admininstrative status of the port. |
| 1.3.6.1.4.1.2272.1.100.2.1.4 | Columnrc2kCpuEthernetPortOperStatus | read-only | current | Used to indicate the administrative status of the port. |
| 1.3.6.1.4.1.2272.1.100.2.1.5 | Columnrc2kCpuEthernetPortAddr | read-write | current | Used to configure the port's IP address |
| 1.3.6.1.4.1.2272.1.100.2.1.6 | Columnrc2kCpuEthernetPortMask | read-write | current | Used to configure the port's net mask |
| 1.3.6.1.4.1.2272.1.100.2.1.7 | Columnrc2kCpuEthernetPortGateway | read-write | current | Used to configure the the IP address of the gateway that should be used to forward IP traffic. |
| 1.3.6.1.4.1.2272.1.100.2.1.8 | Columnrc2kCpuEthernetPortNetwork | read-write | current | Used to configure the network that can be used to remotely manage this device. |
| 1.3.6.1.4.1.2272.1.100.2.1.9 | Columnrc2kCpuEthernetPortAutoNegotiate | read-write | current | Used to configure auto-negotiation on this port. |
| 1.3.6.1.4.1.2272.1.100.2.1.10 | Columnrc2kCpuEthernetPortAdminDuplex | read-write | current | Used to configure the administrative duplex setting for this port. |
| 1.3.6.1.4.1.2272.1.100.2.1.11 | Columnrc2kCpuEthernetPortOperDuplex | read-only | current | Used to indicate the operational duplex setting for this port. |
| 1.3.6.1.4.1.2272.1.100.2.1.12 | Columnrc2kCpuEthernetPortAdminSpeed | read-write | current | Used to configure the administrative speed setting for this port. |
| 1.3.6.1.4.1.2272.1.100.2.1.13 | Columnrc2kCpuEthernetPortOperSpeed | read-only | current | Used to indicate the operational duplex setting for this port. |
| 1.3.6.1.4.1.2272.1.100.2.1.14 | Columnrc2kCpuEthernetPortEnableBootp | read-write | current | Used to enable/disable the Bootp feature on this port. |
| 1.3.6.1.4.1.2272.1.100.2.1.15 | Columnrc2kCpuEthernetPortMgmtMacAddr | read-only | current | Used to indicate the mac addr for this port. |
| 1.3.6.1.4.1.2272.1.100.3 | Tablerc2kCpuSerialPortTable | not-accessible | current | 2k CPU Serial Port table |
| 1.3.6.1.4.1.2272.1.100.3.1 | Rowrc2kCpuSerialPortEntry | not-accessible | current | Entry containing information of 2k CPU Serial Port |
| 1.3.6.1.4.1.2272.1.100.3.1.1 | Columnrc2kCpuSerialPortIfIndex | read-only | current | IfIndex for this port. |
| 1.3.6.1.4.1.2272.1.100.3.1.2 | Columnrc2kCpuSerialPortDescr | read-only | current | Port description. |
| 1.3.6.1.4.1.2272.1.100.3.1.3 | Columnrc2kCpuSerialPortMode | read-write | current | Used to configure the mode this port should operate in. |
| 1.3.6.1.4.1.2272.1.100.3.1.4 | Columnrc2kCpuSerialPortAdminStatus | read-write | current | Used to configure the administrative status setting for this port. |
| 1.3.6.1.4.1.2272.1.100.3.1.5 | Columnrc2kCpuSerialPortOperStatus | read-only | current | Used to indicate the operational status setting for this port. |
| 1.3.6.1.4.1.2272.1.100.3.1.6 | Columnrc2kCpuSerialPortBaudRate | read-write | current | Used to configure the baud rate of this port. |
| 1.3.6.1.4.1.2272.1.100.3.1.7 | Columnrc2kCpuSerialPortDataBits | read-write | current | Used to configure the number of data bits, per byte of data, this port should send/receive. |
| 1.3.6.1.4.1.2272.1.100.3.1.8 | Columnrc2kCpuSerialPortMyAddr | read-write | current | Used to configure this port's IP address. Used for both 'slip' and 'ppp' modes. |
| 1.3.6.1.4.1.2272.1.100.3.1.9 | Columnrc2kCpuSerialPortPeerAddr | read-write | current | Used to configure the peer's IP address. Used for both 'slip' and 'ppp' modes. |
| 1.3.6.1.4.1.2272.1.100.3.1.10 | Columnrc2kCpuSerialPortSlipMtu | read-write | current | Used to configure the MTU for this port. Used for slip only. |
| 1.3.6.1.4.1.2272.1.100.3.1.11 | Columnrc2kCpuSerialPortSlipTxRxCompress | read-write | current | Used to enable/disable compression of TCP/IP packet headers on this port. Used for slip only. |
| 1.3.6.1.4.1.2272.1.100.3.1.12 | Columnrc2kCpuSerialPortSlipRxCompress | read-write | current | Used to enable/disable compression for receiving packets on this port. Used for slip only. |
| 1.3.6.1.4.1.2272.1.100.3.1.13 | Columnrc2kCpuSerialPortPppConfigFile | read-write | current | Used to configure the configuration file to use for PPP. |
| 1.3.6.1.4.1.2272.1.100.4 | Noderc2kDevice | |||
| 1.3.6.1.4.1.2272.1.100.4.1 | Tablerc2kDeviceGlobalTable | not-accessible | current | 2k CPU Ethernet Port table |
| 1.3.6.1.4.1.2272.1.100.4.1.1 | Rowrc2kDeviceGlobalEntry | not-accessible | current | Entry containing information of 2k CPU Ethernet Port |
| 1.3.6.1.4.1.2272.1.100.4.1.1.1 | Columnrc2kDeviceGlobalSlot | read-only | current | slot number |
| 1.3.6.1.4.1.2272.1.100.4.1.1.2 | Columnrc2kDeviceGlobalFlashBytesUsed | read-only | current | bytes used |
| 1.3.6.1.4.1.2272.1.100.4.1.1.3 | Columnrc2kDeviceGlobalFlashBytesFree | read-only | current | bytes free |
| 1.3.6.1.4.1.2272.1.100.4.1.1.4 | Columnrc2kDeviceGlobalFlashNumFiles | read-only | current | # files in flash |
| 1.3.6.1.4.1.2272.1.100.4.1.1.5 | Columnrc2kDeviceGlobalPcmciaBytesUsed | read-only | current | bytes used |
| 1.3.6.1.4.1.2272.1.100.4.1.1.6 | Columnrc2kDeviceGlobalPcmciaBytesFree | read-only | current | bytes free |
| 1.3.6.1.4.1.2272.1.100.4.1.1.7 | Columnrc2kDeviceGlobalPcmciaNumFiles | read-only | current | # files in pcmcia |
| 1.3.6.1.4.1.2272.1.100.4.1.1.8 | Columnrc2kDeviceGlobalAction | read-write | current | none(1), resetPcmcia(2), .. |
| 1.3.6.1.4.1.2272.1.100.4.1.1.9 | Columnrc2kDeviceGlobalResult | read-only | current | Used to indicate the result of the last action performed on one of the system's device. |
| 1.3.6.1.4.1.2272.1.100.4.1.1.10 | Columnrc2kDeviceGlobalFlash1BytesUsed | read-only | current | bytes used |
| 1.3.6.1.4.1.2272.1.100.4.1.1.11 | Columnrc2kDeviceGlobalFlash1BytesFree | read-only | current | bytes free |
| 1.3.6.1.4.1.2272.1.100.4.1.1.12 | Columnrc2kDeviceGlobalFlash1NumFiles | read-only | current | # files in flash |
| 1.3.6.1.4.1.2272.1.100.4.1.1.13 | Columnrc2kDeviceGlobalUsbBytesUsed | read-only | current | bytes used in USB |
| 1.3.6.1.4.1.2272.1.100.4.1.1.14 | Columnrc2kDeviceGlobalUsbBytesFree | read-only | current | bytes free in USB |
| 1.3.6.1.4.1.2272.1.100.4.1.1.15 | Columnrc2kDeviceGlobalUsbNumFiles | read-only | current | # files in USB |
| 1.3.6.1.4.1.2272.1.100.4.1.1.16 | Columnrc2kDeviceGlobalExtflashBytesUsed | read-only | current | bytes used in Extflash |
| 1.3.6.1.4.1.2272.1.100.4.1.1.17 | Columnrc2kDeviceGlobalExtflashBytesFree | read-only | current | bytes free in Extflash |
| 1.3.6.1.4.1.2272.1.100.4.1.1.18 | Columnrc2kDeviceGlobalExtflashNumFiles | read-only | current | # files in Extflash |
| 1.3.6.1.4.1.2272.1.100.4.1.1.19 | Columnrc2kDeviceGlobalIntflashBytesUsed | read-only | current | bytes used in intflash. It is used to replace rc2kDeviceGlobalFlashBytesUsed |
| 1.3.6.1.4.1.2272.1.100.4.1.1.20 | Columnrc2kDeviceGlobalIntflashBytesFree | read-only | current | bytes free in intflash. It is used to replace rc2kDeviceGlobalFlashByteFree |
| 1.3.6.1.4.1.2272.1.100.4.2 | Scalarrc2kDeviceSeparator1 | read-only | current | This leaf is used to provide a separation between tables. No meaningful information is stored in this variable. |
| 1.3.6.1.4.1.2272.1.100.4.3 | Tablerc2kDeviceFlashFileTable | not-accessible | current | 2k Flash table |
| 1.3.6.1.4.1.2272.1.100.4.3.1 | Rowrc2kDeviceFlashFileEntry | not-accessible | current | Entry containing information of 2k CPU Serial Port |
| 1.3.6.1.4.1.2272.1.100.4.3.1.1 | Columnrc2kDeviceFlashFileSlot | read-only | current | slot number |
| 1.3.6.1.4.1.2272.1.100.4.3.1.2 | Columnrc2kDeviceFlashFileName | read-only | current | name of file |
| 1.3.6.1.4.1.2272.1.100.4.3.1.3 | Columnrc2kDeviceFlashFileDate | read-only | current | date |
| 1.3.6.1.4.1.2272.1.100.4.3.1.4 | Columnrc2kDeviceFlashFileSize | read-only | current | size in bytes |
| 1.3.6.1.4.1.2272.1.100.4.4 | Scalarrc2kDevicePcmciaPresent | read-only | current | pcmcia is a slower device. This leaf is used to stop the access into pcmcia file table when it got the end of flash file table. |
| 1.3.6.1.4.1.2272.1.100.4.5 | Tablerc2kDevicePcmciaFileTable | not-accessible | current | 2k PCMCIA table |
| 1.3.6.1.4.1.2272.1.100.4.5.1 | Rowrc2kDevicePcmciaFileEntry | not-accessible | current | Entry containing information of 2k CPU Serial Port |
| 1.3.6.1.4.1.2272.1.100.4.5.1.1 | Columnrc2kDevicePcmciaFileSlot | read-only | current | slot number |
| 1.3.6.1.4.1.2272.1.100.4.5.1.2 | Columnrc2kDevicePcmciaFileName | read-only | current | name of file |
| 1.3.6.1.4.1.2272.1.100.4.5.1.3 | Columnrc2kDevicePcmciaFileDate | read-only | current | date |
| 1.3.6.1.4.1.2272.1.100.4.5.1.4 | Columnrc2kDevicePcmciaFileSize | read-only | current | size in bytes |
| 1.3.6.1.4.1.2272.1.100.4.6 | Scalarrc2kDeviceSeparator2 | read-only | current | This leaf is used to provide a separation between tables. No meaningful information is stored in this variable. |
| 1.3.6.1.4.1.2272.1.100.4.7 | Scalarrc2kDeviceFlash1Present | read-only | current | This leaf is used to stop the access into Flash1 file table. |
| 1.3.6.1.4.1.2272.1.100.4.8 | Tablerc2kDeviceFlash1FileTable | not-accessible | current | 2k Flash1 table |
| 1.3.6.1.4.1.2272.1.100.4.8.1 | Rowrc2kDeviceFlash1FileEntry | not-accessible | current | Entry containing infomation of 2k Flash1 Files |
| 1.3.6.1.4.1.2272.1.100.4.8.1.1 | Columnrc2kDeviceFlash1FileSlot | read-only | current | slot number |
| 1.3.6.1.4.1.2272.1.100.4.8.1.2 | Columnrc2kDeviceFlash1FileName | read-only | current | name of file |
| 1.3.6.1.4.1.2272.1.100.4.8.1.3 | Columnrc2kDeviceFlash1FileDate | read-only | current | date |
| 1.3.6.1.4.1.2272.1.100.4.8.1.4 | Columnrc2kDeviceFlash1FileSize | read-only | current | size in bytes |
| 1.3.6.1.4.1.2272.1.100.4.9 | Tablerc2kDeviceExtflashFileTable | not-accessible | current | 2k Flash table |
| 1.3.6.1.4.1.2272.1.100.4.9.1 | Rowrc2kDeviceExtflashFileEntry | not-accessible | current | Entry containing information of extflash files |
| 1.3.6.1.4.1.2272.1.100.4.9.1.1 | Columnrc2kDeviceExtflashFileSlot | not-accessible | current | slot number |
| 1.3.6.1.4.1.2272.1.100.4.9.1.2 | Columnrc2kDeviceExtflashFileName | not-accessible | current | name of file |
| 1.3.6.1.4.1.2272.1.100.4.9.1.3 | Columnrc2kDeviceExtflashFileDate | read-only | current | date |
| 1.3.6.1.4.1.2272.1.100.4.9.1.4 | Columnrc2kDeviceExtflashFileSize | read-only | current | size in bytes |
| 1.3.6.1.4.1.2272.1.100.4.10 | Tablerc2kDeviceUsbFileTable | not-accessible | current | 2k Usb table |
| 1.3.6.1.4.1.2272.1.100.4.10.1 | Rowrc2kDeviceUsbFileEntry | not-accessible | current | Entry containing information of USB files |
| 1.3.6.1.4.1.2272.1.100.4.10.1.1 | Columnrc2kDeviceUsbFileSlot | not-accessible | current | slot number |
| 1.3.6.1.4.1.2272.1.100.4.10.1.2 | Columnrc2kDeviceUsbFileName | not-accessible | current | name of file |
| 1.3.6.1.4.1.2272.1.100.4.10.1.3 | Columnrc2kDeviceUsbFileDate | read-only | current | date |
| 1.3.6.1.4.1.2272.1.100.4.10.1.4 | Columnrc2kDeviceUsbFileSize | read-only | current | size in bytes |
| 1.3.6.1.4.1.2272.1.100.5 | Tablerc2kBootConfigTable | not-accessible | current | 2k Boot Configuration table |
| 1.3.6.1.4.1.2272.1.100.5.1 | Rowrc2kBootConfigEntry | not-accessible | current | Entry containing boot configuration information. |
| 1.3.6.1.4.1.2272.1.100.5.1.1 | Columnrc2kBootConfigSlot | read-only | current | slot number, VSP uses 1,2 |
| 1.3.6.1.4.1.2272.1.100.5.1.2 | Columnrc2kBootConfigLastBootConfigSource | read-only | current | boot config source |
| 1.3.6.1.4.1.2272.1.100.5.1.3 | Columnrc2kBootConfigLastRuntimeImageSource | read-only | current | runtime image source |
| 1.3.6.1.4.1.2272.1.100.5.1.4 | Columnrc2kBootConfigLastRuntimeConfigSource | read-only | current | runtime config source |
| 1.3.6.1.4.1.2272.1.100.5.1.5 | Columnrc2kBootConfigPrimaryImageSource | read-write | current | image source |
| 1.3.6.1.4.1.2272.1.100.5.1.6 | Columnrc2kBootConfigPrimaryConfigSource | read-write | current | config source |
| 1.3.6.1.4.1.2272.1.100.5.1.7 | Columnrc2kBootConfigSecondaryImageSource | read-write | current | image source |
| 1.3.6.1.4.1.2272.1.100.5.1.8 | Columnrc2kBootConfigSecondaryConfigSource | read-write | current | config source |
| 1.3.6.1.4.1.2272.1.100.5.1.9 | Columnrc2kBootConfigTertiaryImageSource | read-write | current | image source |
| 1.3.6.1.4.1.2272.1.100.5.1.10 | Columnrc2kBootConfigTertiaryConfigSource | read-write | current | config source |
| 1.3.6.1.4.1.2272.1.100.5.1.11 | Columnrc2kBootConfigEnableAutoBoot | read-write | current | auto boot mode |
| 1.3.6.1.4.1.2272.1.100.5.1.12 | Columnrc2kBootConfigEnableFactoryDefaults | read-write | current | use factory default |
| 1.3.6.1.4.1.2272.1.100.5.1.13 | Columnrc2kBootConfigEnableDebugMode | read-write | current | debug mode |
| 1.3.6.1.4.1.2272.1.100.5.1.14 | Columnrc2kBootConfigEnableHwWatchDogTimer | read-write | current | hw watch dog timer |
| 1.3.6.1.4.1.2272.1.100.5.1.15 | Columnrc2kBootConfigEnableRebootOnError | read-write | current | reboot on error |
| 1.3.6.1.4.1.2272.1.100.5.1.16 | Columnrc2kBootConfigEnableTelnetServer | read-write | current | telnet server |
| 1.3.6.1.4.1.2272.1.100.5.1.17 | Columnrc2kBootConfigEnableRloginServer | read-write | current | rlogin server |
| 1.3.6.1.4.1.2272.1.100.5.1.18 | Columnrc2kBootConfigEnableFtpServer | read-write | current | ftp server |
| 1.3.6.1.4.1.2272.1.100.5.1.19 | Columnrc2kBootConfigEnableTftpServer | read-write | current | tftp server |
| 1.3.6.1.4.1.2272.1.100.5.1.20 | Columnrc2kBootConfigSwVersion | read-only | current | current sw version |
| 1.3.6.1.4.1.2272.1.100.5.1.21 | Columnrc2kBootConfigMulticastConfigProfile | read-only | current | multicast config |
| 1.3.6.1.4.1.2272.1.100.5.1.22 | Columnrc2kBootConfigEnableSshServer | read-write | current | ssh server |
| 1.3.6.1.4.1.2272.1.100.5.1.23 | Columnrc2kBootConfigEnableAltLed | read-write | current | Boot flag for enableing Alternate LED |
| 1.3.6.1.4.1.2272.1.100.5.1.24 | Columnrc2kBootConfigPrimaryBackupConfigSource | read-write | current | primary backup config source (safeconfig) |
| 1.3.6.1.4.1.2272.1.100.5.1.25 | Columnrc2kBootConfigSecondaryBackupConfigSource | read-write | current | secondary backup config source (safeconfig) |
| 1.3.6.1.4.1.2272.1.100.5.1.26 | Columnrc2kBootConfigTertiaryBackupConfigSource | read-write | current | tertiary backup config source (safeconfig) |
| 1.3.6.1.4.1.2272.1.100.5.1.27 | Columnrc2kBootConfigEnable8616ReAutoneg | read-write | current | Enable re-autoneg for 8616SX Cards (Intel GMAC fix) |
| 1.3.6.1.4.1.2272.1.100.5.1.28 | Columnrc2kBootConfigMezzImageSource | read-write | current | Mezz image source |
| 1.3.6.1.4.1.2272.1.100.5.1.29 | Columnrc2kBootConfigEnableMezz | read-write | current | Enable/disable Mezz Flag |
| 1.3.6.1.4.1.2272.1.100.5.1.30 | Columnrc2kBootConfigPrimaryLicenseSource | read-write | current | primary license file name |
| 1.3.6.1.4.1.2272.1.100.5.1.31 | Columnrc2kBootConfigSecondaryLicenseSource | read-write | current | secondary license file name |
| 1.3.6.1.4.1.2272.1.100.5.1.32 | Columnrc2kBootConfigTertiaryLicenseSource | read-write | current | tertiary license file name |
| 1.3.6.1.4.1.2272.1.100.5.1.33 | Columnrc2kBootConfigUnknownDstMacDiscard | read-write | obsolete | Enable/disable to discard the unknown destination mac address. A device reboot is required for the change to take effect. |
| 1.3.6.1.4.1.2272.1.100.5.1.34 | Columnrc2kBootConfigUnknownDstMacDiscardOperStatus | read-only | obsolete | Indicates the device operational status of unknown destination mac discard. |
| 1.3.6.1.4.1.2272.1.100.5.1.35 | Columnrc2kBootConfigEnableAutoAssignIp | read-write | current | Enable/disable auto-assign-ip feature |
| 1.3.6.1.4.1.2272.1.100.5.1.36 | Columnrc2kBootConfigUpgradeBootImageSource | read-write | current | Upgrade boot image source |
| 1.3.6.1.4.1.2272.1.100.5.1.37 | Columnrc2kBootConfigUpgradeRuntimeImageSource | read-write | current | Upgrade runtime image source |
| 1.3.6.1.4.1.2272.1.100.5.1.38 | Columnrc2kBootConfigUpgradeMezzImageSource | read-write | current | Upgrade mezz image source |
| 1.3.6.1.4.1.2272.1.100.5.1.39 | Columnrc2kBootConfigUpgradeConfigSource | read-write | current | Upgrade config source |
| 1.3.6.1.4.1.2272.1.100.5.1.40 | Columnrc2kBootConfigUpgradeRModImageSource | read-write | current | upgrade RMod image source |
| 1.3.6.1.4.1.2272.1.100.5.1.41 | Columnrc2kBootConfigUpgradeRCModImageSource | read-write | current | upgrade RCMod image source |
| 1.3.6.1.4.1.2272.1.100.5.1.42 | Columnrc2kBootConfigUpgradeESMImageSource | read-write | current | upgrade ESM image source |
| 1.3.6.1.4.1.2272.1.100.5.1.43 | Columnrc2kBootConfigFallBackBootImageSource | read-write | current | upgrade fall-back boot monitor source |
| 1.3.6.1.4.1.2272.1.100.5.1.44 | Columnrc2kBootConfigEnableCfPcCompat | read-write | current | Enable/disable CF PC compatibility flag |
| 1.3.6.1.4.1.2272.1.100.5.1.45 | Columnrc2kBootConfigLinecardCompatibilityMode | read-write | current | This indicates the admin compatibility mode of the IO cards on the Chassis. In gen1 mode, both the generation 1 cards and generation 2 (ROF) cards will be supp… |
| 1.3.6.1.4.1.2272.1.100.5.1.46 | Columnrc2kBootConfigEnableSpbmConfigMode | read-write | current | Enables spbm-config-mode |
| 1.3.6.1.4.1.2272.1.100.5.1.47 | Columnrc2kBootConfigEnableIpv6Mode | read-write | current | In VSP8200 IPv6 routes with prefix-length greater than 64 bits can be supported only when this flag is enabled. |
| 1.3.6.1.4.1.2272.1.100.5.1.48 | Columnrc2kBootConfigEnableEnhancedsecureMode | read-write | current | Enable/disable Enhancedsecure Mode Flag |
| 1.3.6.1.4.1.2272.1.100.5.1.49 | Columnrc2kBootConfigEnableUrpfMode | read-write | current | From VOSS5.x onwards, unicast reverse path feature will be supported on small system platforms only if this flag is enabled. Configuring the Urpf Mode will res… |
| 1.3.6.1.4.1.2272.1.100.5.1.50 | Columnrc2kBootConfigEnableFlowControlMode | read-write | current | Enable/disable Flow Control Mode Flag. |
| 1.3.6.1.4.1.2272.1.100.5.1.51 | Columnrc2kBootConfigAdvancedFeatureBwReservation | read-write | current | Allow to enable the port forwarding bandwidth working as loopback ports to support advanced feature mode, or disable the reservation for full port mode. Enable… |
| 1.3.6.1.4.1.2272.1.100.5.1.52 | Columnrc2kBootConfigEnableVxlanGwFullInterworkingMode | read-write | current | Enables vxlan gateway full interworking mode. |
| 1.3.6.1.4.1.2272.1.100.5.1.53 | Columnrc2kBootConfigNniMstp | read-write | current | Flag to decide whether configuration of mstp and other vlans on the NNI is allowed, default is not allowed. |
| 1.3.6.1.4.1.2272.1.100.5.1.54 | Columnrc2kBootConfigEnableDvrLeafMode | read-write | current | DVR can be configured as controller or leaf. IP related configuration and show commands are not allowed on leaf. dvr-leaf-mode flag has to be enabled first bef… |
| 1.3.6.1.4.1.2272.1.100.5.1.55 | Columnrc2kBootConfigEnablevrfScaling | read-write | current | Flag to Enable or Disable vrf scaling. |
| 1.3.6.1.4.1.2272.1.100.5.1.56 | Columnrc2kBootConfigLinerateDirectedBroadcast | read-write | current | Flag to Enable or Disable Linerate Directed Broadcast. With this flag set, IP directed broadcast will operate at linerate. Without this flag, all IP directed b… |
| 1.3.6.1.4.1.2272.1.100.5.1.59 | Columnrc2kBootConfigEnableSyslogRfc5424Format | read-write | current | Flag to enable or disable the syslog output format. Enable will align syslog format with RFC 5424. |
| 1.3.6.1.4.1.2272.1.100.6 | Tablerc2kCardTable | not-accessible | current | 2k Card table |
| 1.3.6.1.4.1.2272.1.100.6.1 | Rowrc2kCardEntry | not-accessible | current | Entry containing information of 2k Card |
| 1.3.6.1.4.1.2272.1.100.6.1.1 | Columnrc2kCardIndex | read-only | current | slot number. |
| 1.3.6.1.4.1.2272.1.100.6.1.2 | Columnrc2kCardFrontType | read-only | current | Used to indicate card types in the Accelar 8000 product families. For Accelar 8000 devices, all cards use an encoded value according to the following rule: | 6… |
| 1.3.6.1.4.1.2272.1.100.6.1.3 | Columnrc2kCardFrontDescription | read-only | current | description |
| 1.3.6.1.4.1.2272.1.100.6.1.4 | Columnrc2kCardFrontAdminStatus | read-write | current | Used to indicate the administrative status of this card |
| 1.3.6.1.4.1.2272.1.100.6.1.5 | Columnrc2kCardFrontOperStatus | read-only | current | Used to indicate the operational status of this card. |
| 1.3.6.1.4.1.2272.1.100.6.1.6 | Columnrc2kCardFrontSerialNum | read-only | current | manufacturer serial number of card |
| 1.3.6.1.4.1.2272.1.100.6.1.7 | Columnrc2kCardFrontHwVersion | read-only | current | hardware version |
| 1.3.6.1.4.1.2272.1.100.6.1.8 | Columnrc2kCardFrontPartNumber | read-only | current | manufacturer part number of card |
| 1.3.6.1.4.1.2272.1.100.6.1.9 | Columnrc2kCardFrontDateCode | read-only | current | manufacturer date code |
| 1.3.6.1.4.1.2272.1.100.6.1.10 | Columnrc2kCardFrontDeviations | read-only | current | deviations |
| 1.3.6.1.4.1.2272.1.100.6.1.11 | Columnrc2kCardFrontMacAddr | read-only | current | base mac address |
| 1.3.6.1.4.1.2272.1.100.6.1.12 | Columnrc2kCardBackType | read-only | current | Refer to rc2kCardFrontType for the encoding scheme |
| 1.3.6.1.4.1.2272.1.100.6.1.13 | Columnrc2kCardBackDescription | read-only | current | customer card description |
| 1.3.6.1.4.1.2272.1.100.6.1.14 | Columnrc2kCardBackSerialNum | read-only | current | customer serial number of card |
| 1.3.6.1.4.1.2272.1.100.6.1.15 | Columnrc2kCardBackHwVersion | read-only | current | hardware version |
| 1.3.6.1.4.1.2272.1.100.6.1.16 | Columnrc2kCardBackPartNumber | read-only | current | customer part number |
| 1.3.6.1.4.1.2272.1.100.6.1.17 | Columnrc2kCardBackDateCode | read-only | current | customer date code |
| 1.3.6.1.4.1.2272.1.100.6.1.18 | Columnrc2kCardBackDeviations | read-only | current | customer deviations |
| 1.3.6.1.4.1.2272.1.100.6.1.19 | Columnrc2kCardPCMCIAType | read-only | current | Used to indicate the type of PCMCIA card currently installed in this CPU card, if any. For non-CPU cards, this variable has no meaning and will always be set t… |
| 1.3.6.1.4.1.2272.1.100.6.1.20 | Columnrc2kCardPCMCIADescr | read-only | current | PCMCIA descriptor |
| 1.3.6.1.4.1.2272.1.100.6.1.21 | Columnrc2kCardASICDescr | read-only | current | ASIC descriptor |
| 1.3.6.1.4.1.2272.1.100.6.1.22 | Columnrc2kCardFrontMasterIO | read-only | current | Used to indicate whether an IO card in a 8100 device is operating in the 'master' mode. This variable is not meaningful for non-IO cards and non-8100 devices. |
| 1.3.6.1.4.1.2272.1.100.6.1.23 | Columnrc2kCardSmltOnSingleCpSupported | read-only | current | Used to indicate whether an IO card is updated to support SMLT on single Cp feature or not. |
| 1.3.6.1.4.1.2272.1.100.6.1.24 | Columnrc2kCardMezzCard | read-only | current | Used to indicate the CPU Mezz card |
| 1.3.6.1.4.1.2272.1.100.6.1.25 | Columnrc2kCardFrontPoeOperStatus | read-only | current | Used to indicate the operational status of this card. |
| 1.3.6.1.4.1.2272.1.100.6.1.26 | Columnrc2kCardMezzSerialNum | read-only | current | Used to get the serial number of the mezz |
| 1.3.6.1.4.1.2272.1.100.6.1.27 | Columnrc2kCardMezzHwVersion | read-only | current | Used to get the HW version of the mezz. The value of HW Version corresponds to the value of part number. |
| 1.3.6.1.4.1.2272.1.100.6.1.28 | Columnrc2kCardMezzPartNum | read-only | current | Used to get the part number of the mezz. The value of part number corresponds to the value of HW Version. |
| 1.3.6.1.4.1.2272.1.100.6.1.29 | Columnrc2kCardSlotPriority | read-write | current | Used to indicate the priority of the slot for power management. It will take effect only after reboot. |
| 1.3.6.1.4.1.2272.1.100.6.1.30 | Columnrc2kCardSlotOriginalPriority | read-only | current | Priority of the slot for power management which the swtich has currently booted with. It will remain the same until the next reboot. |
| 1.3.6.1.4.1.2272.1.100.6.1.31 | Columnrc2kCardMode | read-write | current | Used to indicate the single port or dual port is using |
| 1.3.6.1.4.1.2272.1.100.6.1.32 | Columnrc2kCardSlotPower | read-write | current | Administrately turn on or off power on this slot. it only applicable on Standby CP & IO and SF Card |
| 1.3.6.1.4.1.2272.1.100.6.1.33 | Columnrc2kCardModuleSerialNum | read-only | current | Module serial number. It is only applicable to the RS module. And it is not applicable to old version of the R module and CP |
| 1.3.6.1.4.1.2272.1.100.6.1.34 | Columnrc2kCardModulePartNumber | read-only | current | Module part number. It is only applicable to the RS module. And it is not applicable to old version of the R module and CP |
| 1.3.6.1.4.1.2272.1.100.6.1.35 | Columnrc2kCardModuleAssemblyDate | read-only | current | Module assemly date. It is only applicable to the RS module. And it is not applicable to old version of the R module and CP |
| 1.3.6.1.4.1.2272.1.100.7 | Noderc2kCopyFile | |||
| 1.3.6.1.4.1.2272.1.100.7.1 | Scalarrc2kCopyFileSource | read-write | current | source file |
| 1.3.6.1.4.1.2272.1.100.7.2 | Scalarrc2kCopyFileDestination | read-write | current | dest file |
| 1.3.6.1.4.1.2272.1.100.7.3 | Scalarrc2kCopyFileAction | read-write | current | start or cancell |
| 1.3.6.1.4.1.2272.1.100.7.4 | Scalarrc2kCopyFileResult | read-only | current | result |
| 1.3.6.1.4.1.2272.1.100.8 | Noderc2kQos | |||
| 1.3.6.1.4.1.2272.1.100.8.1 | Tablerc2kQosQosTable | not-accessible | current | This table is used to define the Quality Of Service(QOS) profiles for the system. The system can support eight different QOS levels. Each QOS level can be indi… |
| 1.3.6.1.4.1.2272.1.100.8.1.1 | Rowrc2kQosQosEntry | not-accessible | current | QOS profile entry. |
| 1.3.6.1.4.1.2272.1.100.8.1.1.1 | Columnrc2kQosQosRow | read-only | current | Used to uniquely identify a row in this table. |
| 1.3.6.1.4.1.2272.1.100.8.1.1.2 | Columnrc2kQosQosLevel | read-only | current | QOS level |
| 1.3.6.1.4.1.2272.1.100.8.1.1.3 | Columnrc2kQosQosName | read-write | current | Qos level name |
| 1.3.6.1.4.1.2272.1.100.8.1.1.4 | Columnrc2kQosQosAdminWeight | read-write | current | Administrative transmit opportunity percentage |
| 1.3.6.1.4.1.2272.1.100.8.1.1.5 | Columnrc2kQosQosOperWeight | read-only | current | Operational transmit opportunity percentage |
| 1.3.6.1.4.1.2272.1.100.8.1.1.6 | Columnrc2kQosOctapidMode | read-write | obsolete | Octapid mode |
| 1.3.6.1.4.1.2272.1.100.8.1.1.7 | Columnrc2kQosQosAdminThreshold | read-write | current | Administrative queue threshold |
| 1.3.6.1.4.1.2272.1.100.8.1.1.8 | Columnrc2kQosQosOperThreshold | read-only | current | Operational queue threshold |
| 1.3.6.1.4.1.2272.1.100.8.1.1.9 | Columnrc2kQosPidMode | read-write | current | Pid mode |
| 1.3.6.1.4.1.2272.1.100.8.1.1.10 | Columnrc2kQosQosDropThresholdPercentage | read-write | current | The threshold percentage for QoS trap timer for a particular queuing class |
| 1.3.6.1.4.1.2272.1.100.8.1.1.11 | Columnrc2kQosQosDropActualPercentage | read-only | current | The actual page drop percentage on a queue |
| 1.3.6.1.4.1.2272.1.100.8.1.1.12 | Columnrc2kQosQosDropTrapState | read-write | current | Disable/enable page drop traps for a particular queuing class |
| 1.3.6.1.4.1.2272.1.100.8.2 | Tablerc2kQosIngressTagToQosTable | not-accessible | current | This table is used to specify the 802.1P to QOS (802.1P->QOS) mapping on packet ingress. |
| 1.3.6.1.4.1.2272.1.100.8.2.1 | Rowrc2kQosIngressTagToQosEntry | not-accessible | current | Entry containing information of 8021P->Qos mapping |
| 1.3.6.1.4.1.2272.1.100.8.2.1.1 | Columnrc2kQosIngressTagToQosRow | read-only | current | Used to uniquely identify a row in this table. |
| 1.3.6.1.4.1.2272.1.100.8.2.1.2 | Columnrc2kQosIngressTagToQosInIeee8021P | read-only | current | 802.1P |
| 1.3.6.1.4.1.2272.1.100.8.2.1.3 | Columnrc2kQosIngressTagToQosQosLevel | read-write | current | Qos level |
| 1.3.6.1.4.1.2272.1.100.8.3 | Tablerc2kQosIngressDsFieldToQosTable | not-accessible | obsolete | This table is used to specify the DSCP field to QOS (DsField->QOS) mapping on packet ingress. |
| 1.3.6.1.4.1.2272.1.100.8.3.1 | Rowrc2kQosIngressDsFieldToQosEntry | not-accessible | obsolete | Entry containing information of DsField->Qos mapping |
| 1.3.6.1.4.1.2272.1.100.8.3.1.1 | Columnrc2kQosIngressDsFieldToQosRow | read-only | obsolete | Used to uniquely identify a row in this table. |
| 1.3.6.1.4.1.2272.1.100.8.3.1.2 | Columnrc2kQosIngressDsFieldToQosInDsField | read-only | obsolete | diffserv dsField |
| 1.3.6.1.4.1.2272.1.100.8.3.1.3 | Columnrc2kQosIngressDsFieldToQosQosLevel | read-write | obsolete | qos level |
| 1.3.6.1.4.1.2272.1.100.8.4 | Tablerc2kQosEgressQosToTagTable | not-accessible | current | This table is used to specify the QOS to 802.1P (QOS->802.1P) mapping on packet egress. |
| 1.3.6.1.4.1.2272.1.100.8.4.1 | Rowrc2kQosEgressQosToTagEntry | not-accessible | current | Entry containing information of Qos->Qos mapping |
| 1.3.6.1.4.1.2272.1.100.8.4.1.1 | Columnrc2kQosEgressQosToTagRow | read-only | current | Used to uniquely identify a row in this table. |
| 1.3.6.1.4.1.2272.1.100.8.4.1.2 | Columnrc2kQosEgressQosToTagQosLevel | read-only | current | qos level |
| 1.3.6.1.4.1.2272.1.100.8.4.1.3 | Columnrc2kQosEgressQosToTagOutIeee8021P | read-write | current | 802.1P |
| 1.3.6.1.4.1.2272.1.100.8.5 | Tablerc2kQosEgressQosToDsFieldTable | not-accessible | obsolete | This table is used to specify the QOS to DSCP field (QOS->DsField) mapping on packet egress. |
| 1.3.6.1.4.1.2272.1.100.8.5.1 | Rowrc2kQosEgressQosToDsFieldEntry | not-accessible | obsolete | Entry containing information of Qos->Qos mapping |
| 1.3.6.1.4.1.2272.1.100.8.5.1.1 | Columnrc2kQosEgressQosToDsFieldRow | read-only | obsolete | Used to uniquely identify a row in this table. |
| 1.3.6.1.4.1.2272.1.100.8.5.1.2 | Columnrc2kQosEgressQosToDsFieldQosLevel | read-only | obsolete | qos level |
| 1.3.6.1.4.1.2272.1.100.8.5.1.3 | Columnrc2kQosEgressQosToDsFieldOutDsField | read-write | obsolete | diffserv dsField |
| 1.3.6.1.4.1.2272.1.100.8.6 | Tablerc2kQosTrafficProfileTable | not-accessible | current | This table is used to specify traffic profiles for the system. These traffic profiles are used for policying purposes to guarantee streams of traffic do not eg… |
| 1.3.6.1.4.1.2272.1.100.8.6.1 | Rowrc2kQosTrafficProfileEntry | not-accessible | current | Entry containing information of Qos->Qos mapping |
| 1.3.6.1.4.1.2272.1.100.8.6.1.1 | Columnrc2kQosTrafficProfileId | read-only | current | Profile id |
| 1.3.6.1.4.1.2272.1.100.8.6.1.2 | Columnrc2kQosTrafficProfileName | read-write | current | Profile name |
| 1.3.6.1.4.1.2272.1.100.8.6.1.3 | Columnrc2kQosTrafficProfileEnable | read-write | current | Enable this entry |
| 1.3.6.1.4.1.2272.1.100.8.6.1.4 | Columnrc2kQosTrafficProfileTranslateDscpEnable | read-write | current | Used to specify whether translation of the DSCP field should be performed. If enabled, the value in the DSCP field for packets that fall within the traffic pro… |
| 1.3.6.1.4.1.2272.1.100.8.6.1.5 | Columnrc2kQosTrafficProfileInProfileDscp | read-write | current | Used to specify the DSCP value for 'good' packets. |
| 1.3.6.1.4.1.2272.1.100.8.6.1.6 | Columnrc2kQosTrafficProfileOutProfileDscp | read-write | current | Used to specify the DSCP value for 'violation' packets. |
| 1.3.6.1.4.1.2272.1.100.8.6.1.7 | Columnrc2kQosTrafficProfileDiscardEnable | read-write | current | Used to specify whether packets that fall outside the traffic profile should be discarded. |
| 1.3.6.1.4.1.2272.1.100.8.6.1.8 | Columnrc2kQosTrafficProfileAverageRate | read-write | current | Average rate in packets per second. |
| 1.3.6.1.4.1.2272.1.100.8.6.1.9 | Columnrc2kQosTrafficProfilePeakRate | read-write | obsolete | Peak rate in packets per second. |
| 1.3.6.1.4.1.2272.1.100.8.6.1.10 | Columnrc2kQosTrafficProfileRowStatus | read-write | current | Used to create/delete entries. |
| 1.3.6.1.4.1.2272.1.100.8.7 | Tablerc2kQosIngressDscpToQosTable | not-accessible | current | This table is used to specify the DSCP to QOS (Dscp->QOS) mapping on packet ingress. |
| 1.3.6.1.4.1.2272.1.100.8.7.1 | Rowrc2kQosIngressDscpToQosEntry | not-accessible | current | Entry containing information of Dscp->Qos mapping |
| 1.3.6.1.4.1.2272.1.100.8.7.1.1 | Columnrc2kQosIngressDscpToQosRow | read-only | current | Used to uniquely identify a row in this table. |
| 1.3.6.1.4.1.2272.1.100.8.7.1.2 | Columnrc2kQosIngressDscpToQosInDscp | read-only | current | A 6-bit value used to define the Differentiated Service Code Point(DSCP). |
| 1.3.6.1.4.1.2272.1.100.8.7.1.3 | Columnrc2kQosIngressDscpToQosInDscpBinaryFormat | read-only | current | The 'rc2kQosIngressDscpToQosInDscp' value shown in a binary format (network order). |
| 1.3.6.1.4.1.2272.1.100.8.7.1.4 | Columnrc2kQosIngressDscpToQosQosLevel | read-write | current | qos level |
| 1.3.6.1.4.1.2272.1.100.8.8 | Tablerc2kQosEgressQosToDscpTable | not-accessible | current | This table is used to specify the QOS to DSCP field (QOS->DsField) mapping on packet egress. |
| 1.3.6.1.4.1.2272.1.100.8.8.1 | Rowrc2kQosEgressQosToDscpEntry | not-accessible | current | Entry containing information of Qos->Qos mapping |
| 1.3.6.1.4.1.2272.1.100.8.8.1.1 | Columnrc2kQosEgressQosToDscpRow | read-only | current | Used to uniquely identify a row in this table. |
| 1.3.6.1.4.1.2272.1.100.8.8.1.2 | Columnrc2kQosEgressQosToDscpQosLevel | read-only | current | qos level |
| 1.3.6.1.4.1.2272.1.100.8.8.1.3 | Columnrc2kQosEgressQosToDscpOutDscp | read-write | current | A 6-bit value used to define the Differentiated Service Code Point(DSCP). |
| 1.3.6.1.4.1.2272.1.100.8.8.1.4 | Columnrc2kQosEgressQosToDscpOutDscpBinaryFormat | read-only | current | The 'rc2kQosEgressQosToDscpOutDscp' value show in a binary format (network order). |
| 1.3.6.1.4.1.2272.1.100.8.9 | Tablerc2kQosEgressGreenColorQosToTagTable | not-accessible | current | This table is used to specify the green color QOS to 802.1P (QOS -> 802.1P) mapping on packet egress. |
| 1.3.6.1.4.1.2272.1.100.8.9.1 | Rowrc2kQosEgressGreenColorQosToTagEntry | not-accessible | current | Entry containing infomation of Qos -> Qos mapping for green colored packets. |
| 1.3.6.1.4.1.2272.1.100.8.9.1.1 | Columnrc2kQosEgressGreenColorQosToTagRow | not-accessible | current | Used to uniquely identify a row in this table. |
| 1.3.6.1.4.1.2272.1.100.8.9.1.2 | Columnrc2kQosEgressGreenColorQosToTagQosLevel | read-only | current | Qos level |
| 1.3.6.1.4.1.2272.1.100.8.9.1.3 | Columnrc2kQosEgressGreenColorQosToTagOutIeee8021P | read-write | current | 802.1P. This value shows the Pbit mapping with Qos level on the egress packet |
| 1.3.6.1.4.1.2272.1.100.8.10 | Tablerc2kQosEgressYellowColorQosToTagTable | not-accessible | current | This table is used to specify the yellow color QOS to 802.1P (QOS -> 802.1P) mapping on packet egress. |
| 1.3.6.1.4.1.2272.1.100.8.10.1 | Rowrc2kQosEgressYellowColorQosToTagEntry | not-accessible | current | Entry containing infomation of Qos -> Qos mapping for Yellow colored packets. |
| 1.3.6.1.4.1.2272.1.100.8.10.1.1 | Columnrc2kQosEgressYellowColorQosToTagRow | not-accessible | current | Used to uniquely identify a row in this table. |
| 1.3.6.1.4.1.2272.1.100.8.10.1.2 | Columnrc2kQosEgressYellowColorQosToTagQosLevel | read-only | current | Qos level |
| 1.3.6.1.4.1.2272.1.100.8.10.1.3 | Columnrc2kQosEgressYellowColorQosToTagOutIeee8021P | read-write | current | 802.1P, The value shows the Pbit Mapping with the Qos level on Egress packet |
| 1.3.6.1.4.1.2272.1.100.8.11 | Tablerc2kQosEgressRedColorQosToTagTable | not-accessible | current | This table is used to specify the red color QOS to 802.1P (QOS -> 802.1P) mapping on packet egress. |
| 1.3.6.1.4.1.2272.1.100.8.11.1 | Rowrc2kQosEgressRedColorQosToTagEntry | not-accessible | current | Entry containing infomation of Qos -> Qos mapping for red colored packets. |
| 1.3.6.1.4.1.2272.1.100.8.11.1.1 | Columnrc2kQosEgressRedColorQosToTagRow | not-accessible | current | Used to uniquely identify a row in this table. |
| 1.3.6.1.4.1.2272.1.100.8.11.1.2 | Columnrc2kQosEgressRedColorQosToTagQosLevel | read-only | current | Qos level |
| 1.3.6.1.4.1.2272.1.100.8.11.1.3 | Columnrc2kQosEgressRedColorQosToTagOutIeee8021P | read-write | current | 802.1P. The value shows the Pbit mapping with the Qos level of Egress packet |
| 1.3.6.1.4.1.2272.1.100.8.12 | Noderc2kQosWredThreshold | |||
| 1.3.6.1.4.1.2272.1.100.8.12.1 | Tablerc2kQosWredThresholdHighDropTable | not-accessible | current | This table is used to specify the WRED drop thresholds for High Drop Curve Set |
| 1.3.6.1.4.1.2272.1.100.8.12.1.1 | Rowrc2kQosWredThresholdHighDropEntry | not-accessible | current | Entry containing information for different Qmin and Qmax for High Drop Curve Set |
| 1.3.6.1.4.1.2272.1.100.8.12.1.1.1 | Columnrc2kQosWredThresholdHighDropColor | not-accessible | current | Colored Queue for WRED Threshold High Drop Curve Set. |
| 1.3.6.1.4.1.2272.1.100.8.12.1.1.2 | Columnrc2kQosWredThresholdHighDropQmin | read-write | current | Minimum drop threshold. |
| 1.3.6.1.4.1.2272.1.100.8.12.1.1.3 | Columnrc2kQosWredThresholdHighDropQmax | read-write | current | Maximum drop threshold. |
| 1.3.6.1.4.1.2272.1.100.8.12.2 | Tablerc2kQosWredThresholdMediumDropTable | not-accessible | current | This table is used to specify the WRED drop thresholds for Medium Drop Curve Set |
| 1.3.6.1.4.1.2272.1.100.8.12.2.1 | Rowrc2kQosWredThresholdMediumDropEntry | not-accessible | current | Entry containing information for different Qmin and Qmax for Medium Drop Curve Set |
| 1.3.6.1.4.1.2272.1.100.8.12.2.1.1 | Columnrc2kQosWredThresholdMediumDropColor | not-accessible | current | Colored Queue for WRED Threshold Medium Drop Curve Set. |
| 1.3.6.1.4.1.2272.1.100.8.12.2.1.2 | Columnrc2kQosWredThresholdMediumDropQmin | read-write | current | Minimum drop threshold. |
| 1.3.6.1.4.1.2272.1.100.8.12.2.1.3 | Columnrc2kQosWredThresholdMediumDropQmax | read-write | current | Maximum drop threshold. |
| 1.3.6.1.4.1.2272.1.100.8.12.3 | Tablerc2kQosWredThresholdLowDropTable | not-accessible | current | This table is used to specify the WRED drop thresholds for Low Drop Curve Set |
| 1.3.6.1.4.1.2272.1.100.8.12.3.1 | Rowrc2kQosWredThresholdLowDropEntry | not-accessible | current | Entry containing information for different Qmin and Qmax for Low Drop Curve Set |
| 1.3.6.1.4.1.2272.1.100.8.12.3.1.1 | Columnrc2kQosWredThresholdLowDropColor | not-accessible | current | Colored Queue for WRED Threshold Low Drop Curve Set. |
| 1.3.6.1.4.1.2272.1.100.8.12.3.1.2 | Columnrc2kQosWredThresholdLowDropQmin | read-write | current | Minimum drop threshold. |
| 1.3.6.1.4.1.2272.1.100.8.12.3.1.3 | Columnrc2kQosWredThresholdLowDropQmax | read-write | current | Maximum drop threshold. |
| 1.3.6.1.4.1.2272.1.100.8.13 | Scalarrc2kQosDropTrapTimer | read-write | current | The timer settings for traps being sent on discard of packets on QoS queues |
| 1.3.6.1.4.1.2272.1.100.8.14 | Tablerc2kQosStatsTable | not-accessible | current | This table contains Qos statistic of the for all interface. Which includes Pbit Tx and drop by pages in 8 Qos level |
| 1.3.6.1.4.1.2272.1.100.8.14.1 | Rowrc2kQosStatsEntry | not-accessible | current | Qos Statistics table entry contain the pbit Tx and dorp of a interface |
| 1.3.6.1.4.1.2272.1.100.8.14.1.1 | Columnrc2kQosStatsIfIndex | not-accessible | current | port number |
| 1.3.6.1.4.1.2272.1.100.8.14.1.2 | Columnrc2kQosStatsTxPbit0Pages | read-only | current | Number of Pages Transmitted for p-bit 0 |
| 1.3.6.1.4.1.2272.1.100.8.14.1.3 | Columnrc2kQosStatsDrPbit0Pages | read-only | current | Number of Pages Dropped for p-bit 0 |
| 1.3.6.1.4.1.2272.1.100.8.14.1.4 | Columnrc2kQosStatsTxPbit1Pages | read-only | current | Number of Pages Transmitted for p-bit 1 |
| 1.3.6.1.4.1.2272.1.100.8.14.1.5 | Columnrc2kQosStatsDrPbit1Pages | read-only | current | Number of Pages Dropped for p-bit 1 |
| 1.3.6.1.4.1.2272.1.100.8.14.1.6 | Columnrc2kQosStatsTxPbit2Pages | read-only | current | Number of Pages Transmitted for p-bit 2 |
| 1.3.6.1.4.1.2272.1.100.8.14.1.7 | Columnrc2kQosStatsDrPbit2Pages | read-only | current | Number of Pages Dropped for p-bit 2 |
| 1.3.6.1.4.1.2272.1.100.8.14.1.8 | Columnrc2kQosStatsTxPbit3Pages | read-only | current | Number of Pages Transmitted for p-bit 3 |
| 1.3.6.1.4.1.2272.1.100.8.14.1.9 | Columnrc2kQosStatsDrPbit3Pages | read-only | current | Number of Pages Dropped for p-bit 3 |
| 1.3.6.1.4.1.2272.1.100.8.14.1.10 | Columnrc2kQosStatsTxPbit4Pages | read-only | current | Number of Pages Transmitted for p-bit 4 |
| 1.3.6.1.4.1.2272.1.100.8.14.1.11 | Columnrc2kQosStatsDrPbit4Pages | read-only | current | Number of Pages Dropped for p-bit 4 |
| 1.3.6.1.4.1.2272.1.100.8.14.1.12 | Columnrc2kQosStatsTxPbit5Pages | read-only | current | Number of Pages Transmitted for p-bit 5 |
| 1.3.6.1.4.1.2272.1.100.8.14.1.13 | Columnrc2kQosStatsDrPbit5Pages | read-only | current | Number of Pages Dropped for p-bit 5 |
| 1.3.6.1.4.1.2272.1.100.8.14.1.14 | Columnrc2kQosStatsTxPbit6Pages | read-only | current | Number of Pages Transmitted for p-bit 6 |
| 1.3.6.1.4.1.2272.1.100.8.14.1.15 | Columnrc2kQosStatsDrPbit6Pages | read-only | current | Number of Pages Dropped for p-bit 6 |
| 1.3.6.1.4.1.2272.1.100.8.14.1.16 | Columnrc2kQosStatsTxPbit7Pages | read-only | current | Number of Pages Transmitted for p-bit 7 |
| 1.3.6.1.4.1.2272.1.100.8.14.1.17 | Columnrc2kQosStatsDrPbit7Pages | read-only | current | Number of Pages Dropped for p-bit 7 |
| 1.3.6.1.4.1.2272.1.100.8.15 | Scalarrc2kQosDECoding | read-write | current | This indicates the DE Coding that should be used |
| 1.3.6.1.4.1.2272.1.100.8.16 | Scalarrc2kQosCombinePassDropQueueBW | read-write | current | Combine Pass-Drop queue bandwidth |
| 1.3.6.1.4.1.2272.1.100.8.17 | Scalarrc2kQosSplitPassDropQueueBW | read-write | current | Split Pass-Drop queue bandwidth |
| 1.3.6.1.4.1.2272.1.100.8.18 | Tablerc2kQosEgressQosPCPTable | not-accessible | current | This table is used to specify the Priority Code Point table. |
| 1.3.6.1.4.1.2272.1.100.8.18.1 | Rowrc2kQosEgressQosPCPEntry | not-accessible | current | Entry containing information of PCP Table |
| 1.3.6.1.4.1.2272.1.100.8.18.1.1 | Columnrc2kQosEgressQosPCPRow | not-accessible | current | Used to uniquely identify a row in this table. |
| 1.3.6.1.4.1.2272.1.100.8.18.1.2 | Columnrc2kQosEgressQosPCPLevel | read-only | current | Qos level |
| 1.3.6.1.4.1.2272.1.100.8.18.1.3 | Columnrc2kQosEgressQosPCPInProfileIeee8021P | read-only | current | In Profile 802.1P |
| 1.3.6.1.4.1.2272.1.100.8.18.1.4 | Columnrc2kQosEgressQosPCPOutOfProfileIeee8021P | read-only | current | Out Of Profile 802.1P |
| 1.3.6.1.4.1.2272.1.100.8.19 | Scalarrc2kQosUseCfiAsDei | read-write | current | This indicates whether to use CFI bit (for non 88a8 packets) as DEI bit or not. |
| 1.3.6.1.4.1.2272.1.100.8.20 | Scalarrc2kQosFOQDropTrapInterval | read-write | current | The time interval indicating how often FOQ drop traps should be sent. An interval of 0 disables the traps. |
| 1.3.6.1.4.1.2272.1.100.8.21 | Scalarrc2kQosFabricDropTrapInterval | read-write | current | The time interval indicating how often Fabric drop traps should be sent. An interval of 0 disables the traps. |
| 1.3.6.1.4.1.2272.1.100.8.22 | Scalarrc2kQosTotalDropReadings | read-only | current | The total count of drop samples. This is used when sending FOQ/Fabric Drop Traps |
| 1.3.6.1.4.1.2272.1.100.8.23 | Scalarrc2kQosDropReadings | read-only | current | The total number of drop samples within the drop trap time interval. This is used when sending FOQ/Fabric Drop Traps. |
| 1.3.6.1.4.1.2272.1.100.8.24 | Tablerc2kQosFabricInterfaceStatsTable | not-accessible | current | |
| 1.3.6.1.4.1.2272.1.100.8.24.1 | Rowrc2kQosFabricInterfaceStatsEntry | not-accessible | current | A Fabric Interface Drop Statistics table entry. |
| 1.3.6.1.4.1.2272.1.100.8.24.1.1 | Columnrc2kQosFabricInterfaceStatsSlotNumber | not-accessible | current | Slot Number |
| 1.3.6.1.4.1.2272.1.100.8.24.1.2 | Columnrc2kQosFabricInterfaceStatsLaneNumber | not-accessible | current | Lane number. 0 - Left, 1 - Middle, 2 - Right. |
| 1.3.6.1.4.1.2272.1.100.8.24.1.3 | Columnrc2kQosFabricInterfaceStatsFOQDropEvents | read-only | current | Count of FOQ drop events occurred in this drop-trap time period. |
| 1.3.6.1.4.1.2272.1.100.8.24.1.4 | Columnrc2kQosFabricInterfaceStatsFOQTotalDropEvents | read-only | current | Total count of FOQ drop events |
| 1.3.6.1.4.1.2272.1.100.8.24.1.5 | Columnrc2kQosFabricInterfaceStatsFabricDropEvents | read-only | current | Count of Fabric drop events occurred in this drop-trap time period. |
| 1.3.6.1.4.1.2272.1.100.8.24.1.6 | Columnrc2kQosFabricInterfaceStatsFabricTotalDropEvents | read-only | current | Total count of Fabric drop events |
| 1.3.6.1.4.1.2272.1.100.8.25 | Tablerc2kQosQueueProfileTable | not-accessible | current | This table is used to specify queue profiles for the ports to which the profiles will be linked to. These queue profiles are used for shaping the egress queues… |
| 1.3.6.1.4.1.2272.1.100.8.25.1 | Rowrc2kQosQueueProfileEntry | not-accessible | current | Entry containing information of port egress queue shaping |
| 1.3.6.1.4.1.2272.1.100.8.25.1.1 | Columnrc2kQosQueueProfileId | not-accessible | current | A value that uniquely identifies Queue Profile. |
| 1.3.6.1.4.1.2272.1.100.8.25.1.2 | Columnrc2kQosQueueProfileName | read-create | current | An administratively-assigned name for this Queue Profile. |
| 1.3.6.1.4.1.2272.1.100.8.25.1.3 | Columnrc2kQosQueueProfileApply | read-create | current | When apply is issued by the administrator, the Queue Profile attributes are committed. |
| 1.3.6.1.4.1.2272.1.100.8.25.1.4 | Columnrc2kQosQueueProfileRowStatus | read-create | current | Create/delete operations for this entry. |
| 1.3.6.1.4.1.2272.1.100.8.26 | Tablerc2kQosQueueTable | not-accessible | current | This table is used to specify egress queue Weight values and rate-limit enabled/disabled status for a particular Tx queue under a specific Queue Profile. |
| 1.3.6.1.4.1.2272.1.100.8.26.1 | Rowrc2kQosQueueEntry | not-accessible | current | Entry containing information of egress queue shaping parameters |
| 1.3.6.1.4.1.2272.1.100.8.26.1.1 | Columnrc2kQosQueuePId | not-accessible | current | Queue Profile ID under which this queue parameters are set. |
| 1.3.6.1.4.1.2272.1.100.8.26.1.2 | Columnrc2kQosQueueId | not-accessible | current | Tx Queue id for which the qos queue parameters are set. |
| 1.3.6.1.4.1.2272.1.100.8.26.1.3 | Columnrc2kQosQueueAdminWeight | read-write | current | Administrative transmit opportunity percentage for this queue |
| 1.3.6.1.4.1.2272.1.100.8.26.1.4 | Columnrc2kQosQueueOperWeight | read-only | current | Operational transmit opportunity percentage for this queue |
| 1.3.6.1.4.1.2272.1.100.8.26.1.5 | Columnrc2kQosQueueAdminRateLimitStatus | read-write | current | Administrative rate limit status for this queue |
| 1.3.6.1.4.1.2272.1.100.8.26.1.6 | Columnrc2kQosQueueOperRateLimitStatus | read-only | current | Operational rate limit staus for this queue |
| 1.3.6.1.4.1.2272.1.100.9 | Noderc2kAtm | |||
| 1.3.6.1.4.1.2272.1.100.9.1 | Noderc2kAtmGlobal | |||
| 1.3.6.1.4.1.2272.1.100.9.1.1 | Scalarrc2kAtmElanStatsClearAll | read-write | current | Clear all Elan Statistics |
| 1.3.6.1.4.1.2272.1.100.9.2 | Tablerc2kAtmPortTable | not-accessible | current | ATM port table |
| 1.3.6.1.4.1.2272.1.100.9.2.1 | Rowrc2kAtmPortEntry | not-accessible | current | Entry containing information of ATM port |
| 1.3.6.1.4.1.2272.1.100.9.2.1.1 | Columnrc2kAtmPortIfIndex | read-only | current | port number |
| 1.3.6.1.4.1.2272.1.100.9.2.1.2 | Columnrc2kAtmPortNumVpiBits | read-write | current | # of vpi bits. For OC3, the max number of vpibits is 6. However, for OC12, it is 8. Both media types share the same MIB object. |
| 1.3.6.1.4.1.2272.1.100.9.2.1.3 | Columnrc2kAtmPortNumVciBits | read-write | current | # of vci bits |
| 1.3.6.1.4.1.2272.1.100.9.2.1.4 | Columnrc2kAtmPortMediaType | read-only | current | media type |
| 1.3.6.1.4.1.2272.1.100.9.2.1.5 | Columnrc2kAtmPortScrambleEnable | read-write | current | enable scramble |
| 1.3.6.1.4.1.2272.1.100.9.2.1.6 | Columnrc2kAtmPortFramingMode | read-write | current | port framing mode |
| 1.3.6.1.4.1.2272.1.100.9.2.1.7 | Columnrc2kAtmPortClockSource | read-write | current | clock source |
| 1.3.6.1.4.1.2272.1.100.9.2.1.8 | Columnrc2kAtmPortLineSpeed | read-only | current | line speed |
| 1.3.6.1.4.1.2272.1.100.9.2.1.9 | Columnrc2kAtmPortLoopBackMode | read-write | current | loop back mode |
| 1.3.6.1.4.1.2272.1.100.9.2.1.10 | Columnrc2kAtmPortMacAddress | read-only | current | XLR assigned MAC addr |
| 1.3.6.1.4.1.2272.1.100.9.3 | Tablerc2kAtmPvcTable | not-accessible | current | ATM Pvc table |
| 1.3.6.1.4.1.2272.1.100.9.3.1 | Rowrc2kAtmPvcEntry | not-accessible | current | Entry containing information of ATM Pvc |
| 1.3.6.1.4.1.2272.1.100.9.3.1.1 | Columnrc2kAtmPvcIfIndex | read-only | current | port number |
| 1.3.6.1.4.1.2272.1.100.9.3.1.2 | Columnrc2kAtmPvcVpi | read-only | current | vpi of this pvc |
| 1.3.6.1.4.1.2272.1.100.9.3.1.3 | Columnrc2kAtmPvcVci | read-only | current | vci of this pvc |
| 1.3.6.1.4.1.2272.1.100.9.3.1.4 | Columnrc2kAtmPvcPvcId | read-only | current | internal pvc id |
| 1.3.6.1.4.1.2272.1.100.9.3.1.5 | Columnrc2kAtmPvcName | read-write | current | name of pvc |
| 1.3.6.1.4.1.2272.1.100.9.3.1.6 | Columnrc2kAtmPvcEncapsulation | read-write | current | encapsulation |
| 1.3.6.1.4.1.2272.1.100.9.3.1.7 | Columnrc2kAtmPvcServiceType | read-write | current | service type |
| 1.3.6.1.4.1.2272.1.100.9.3.1.8 | Columnrc2kAtmPvcPeakCellRate | read-write | current | Peak cell rate in cells per second. The maximum peak cell rate is half of the line rate. The peak cell rate for MDA type OC12 must be less than 733491. However… |
| 1.3.6.1.4.1.2272.1.100.9.3.1.9 | Columnrc2kAtmPvcSustainedCellRate | read-write | current | Sustained cell rate in cells per second. The maximum peak cell rate is half of the line rate. The peak cell rate for MDA type OC12 must be less than 733491. Ho… |
| 1.3.6.1.4.1.2272.1.100.9.3.1.10 | Columnrc2kAtmPvcMaxBurstSize | read-write | current | max burst size |
| 1.3.6.1.4.1.2272.1.100.9.3.1.11 | Columnrc2kAtmPvcRowStatus | read-write | current | row status |
| 1.3.6.1.4.1.2272.1.100.9.3.1.12 | Columnrc2kAtmPvcOamLbMgmtEnable | read-write | current | Indicate whether end-to-end F5 OAM loopback is enabled. When it is enabled, OAM loopback request is sent periodically |
| 1.3.6.1.4.1.2272.1.100.9.3.1.13 | Columnrc2kAtmPvcOamLbSendFrequency | read-write | current | Number of seconds between transmitting OAM loopback request |
| 1.3.6.1.4.1.2272.1.100.9.3.1.14 | Columnrc2kAtmPvcOamLbRetryFrequency | read-write | current | Number of seconds between retry |
| 1.3.6.1.4.1.2272.1.100.9.3.1.15 | Columnrc2kAtmPvcOamLbUpCount | read-write | current | Number of consecutive end-to-end F5 OAM loopback cell responses that must be received in order to change a PVC connection state to up |
| 1.3.6.1.4.1.2272.1.100.9.3.1.16 | Columnrc2kAtmPvcOamLbDownCount | read-write | current | Number of consecutive end-to-end F5 OAM loopback cell responses that are not received in order to change a PVC state to down. |
| 1.3.6.1.4.1.2272.1.100.9.3.1.17 | Columnrc2kAtmPvcOamTrapEnable | read-write | current | Indicate whether OAM trap is enabled. When it is enabled, a trap is sent to the management station when rc2kAtmPvcOamVcStatus is going up or down. |
| 1.3.6.1.4.1.2272.1.100.9.3.1.18 | Columnrc2kAtmPvcOamVcStatus | read-only | current | Indicate the status of PVC link. Not Managed Down Verify loopback cells are sent at retry frequency to verify the VC is really down. After down-count unsuccess… |
| 1.3.6.1.4.1.2272.1.100.9.3.1.19 | Columnrc2kAtmPvcOamLbRequestSent | read-only | current | Number of OAM loopback request sent |
| 1.3.6.1.4.1.2272.1.100.9.3.1.20 | Columnrc2kAtmPvcOamLbReplySent | read-only | current | Number of OAM loopback reply sent |
| 1.3.6.1.4.1.2272.1.100.9.3.1.21 | Columnrc2kAtmPvcOamLbReplyReceived | read-only | current | Number of OAM loopback reply received |
| 1.3.6.1.4.1.2272.1.100.9.5 | Tablerc2kAtm1483ElanTable | not-accessible | current | ATM 1483Elan table |
| 1.3.6.1.4.1.2272.1.100.9.5.1 | Rowrc2kAtm1483ElanEntry | not-accessible | current | Entry containing information of ATM 1483Elan |
| 1.3.6.1.4.1.2272.1.100.9.5.1.1 | Columnrc2kAtm1483ElanIfIndex | read-only | current | port number |
| 1.3.6.1.4.1.2272.1.100.9.5.1.2 | Columnrc2kAtm1483ElanElanId | read-only | current | Elan Id |
| 1.3.6.1.4.1.2272.1.100.9.5.1.3 | Columnrc2kAtm1483ElanNumPvcIds | read-only | current | # pvc-ids in list |
| 1.3.6.1.4.1.2272.1.100.9.5.1.4 | Columnrc2kAtm1483ElanPvcIds | read-write | current | list of pvc-ids. each pvc-id is represented by a 32 bit value this field can contain a maximum of 64 pvc-ids. |
| 1.3.6.1.4.1.2272.1.100.9.5.1.5 | Columnrc2kAtm1483ElanVlanId | read-write | current | vlan tag for this 1483 |
| 1.3.6.1.4.1.2272.1.100.9.5.1.6 | Columnrc2kAtm1483ElanRowStatus | read-write | current | row status |
| 1.3.6.1.4.1.2272.1.100.9.5.1.7 | Columnrc2kAtm1483ElanConnectType | read-write | current | connection type |
| 1.3.6.1.4.1.2272.1.100.9.5.1.8 | Columnrc2kAtm1483ElanVlanMacAddress | read-only | current | mac for vlan |
| 1.3.6.1.4.1.2272.1.100.9.5.1.9 | Columnrc2kAtm1483ElanDummyMacAddress | read-only | current | dummy mac for the other router |
| 1.3.6.1.4.1.2272.1.100.9.5.1.10 | Columnrc2kAtm1483ElanLocalIpAddress | read-write | current | local ip, if ConnectType is ip(2) |
| 1.3.6.1.4.1.2272.1.100.9.5.1.11 | Columnrc2kAtm1483ElanRemoteIpAddress | read-write | current | remote ip, if ConnectType is ip(2) |
| 1.3.6.1.4.1.2272.1.100.9.5.1.12 | Columnrc2kAtm1483ElanInArpSendEnable | read-write | current | enable arp sending on the port, if ConnectType is ip(2) |
| 1.3.6.1.4.1.2272.1.100.9.5.1.13 | Columnrc2kAtm1483ElanInArpSendInterval | read-write | current | interval of arp sending on the port, if ConnectType is ip(2) |
| 1.3.6.1.4.1.2272.1.100.9.5.1.14 | Columnrc2kAtm1483ElanIpxVlanEncapMethod | read-write | current | vlan encapsulation method, if ConnectType is ipx(3) |
| 1.3.6.1.4.1.2272.1.100.9.5.1.15 | Columnrc2kAtm1483ElanIpxNetworkNum | read-write | current | network number, if ConnectType is ipx(3) |
| 1.3.6.1.4.1.2272.1.100.9.5.1.16 | Columnrc2kAtm1483ElanStgId | read-only | current | An identifier used to identify a STG in the device, only in bridge mode |
| 1.3.6.1.4.1.2272.1.100.9.5.1.17 | Columnrc2kAtm1483ElanrcStgTaggedBpduVlanId | read-only | current | The VLAN ID to be used for tagging BPDUs, only in bridge mode. |
| 1.3.6.1.4.1.2272.1.100.9.5.1.18 | Columnrc2kAtm1483ElanIpxNetworkAddr | read-write | current | network number, instead of rc2kAtm1483ElanIpxNetworkNum |
| 1.3.6.1.4.1.2272.1.100.9.8 | Tablerc2kAtmSioCardConfigTable | not-accessible | current | 2kAtm Sio Card Config Table |
| 1.3.6.1.4.1.2272.1.100.9.8.1 | Rowrc2kAtmSioCardConfigEntry | not-accessible | current | Entry containing information of 2kAtm Sio Card Config. |
| 1.3.6.1.4.1.2272.1.100.9.8.1.1 | Columnrc2kAtmSioCardConfigSlotIndex | read-only | current | slot Index. |
| 1.3.6.1.4.1.2272.1.100.9.8.1.2 | Columnrc2kAtmSioCardConfigAction | read-write | current | |
| 1.3.6.1.4.1.2272.1.100.9.8.1.3 | Columnrc2kAtmSioCardConfigTraceMode | read-write | current | |
| 1.3.6.1.4.1.2272.1.100.9.8.1.4 | Columnrc2kAtmSioCardConfigImageFileName | read-only | current | ATM Image file name. |
| 1.3.6.1.4.1.2272.1.100.9.8.1.5 | Columnrc2kAtmSioCardConfigElanStatsEnable | read-write | current | Enable/Disable Elan Statistics collection |
| 1.3.6.1.4.1.2272.1.100.9.8.1.6 | Columnrc2kAtmSioCardConfigStatsPollPeriod | read-write | current | Time interval after which Elan statistics would be polled |
| 1.3.6.1.4.1.2272.1.100.9.10 | Tablerc2kAtmPortStatsTable | not-accessible | current | ATM port statistics table |
| 1.3.6.1.4.1.2272.1.100.9.10.1 | Rowrc2kAtmPortStatsEntry | not-accessible | current | Entry containing information of ATM port statistics |
| 1.3.6.1.4.1.2272.1.100.9.10.1.1 | Columnrc2kAtmPortStatsIfIndex | read-only | current | port number |
| 1.3.6.1.4.1.2272.1.100.9.10.1.2 | Columnrc2kAtmPortStatsInCells | read-only | current | Number of Cells received from ATM interface |
| 1.3.6.1.4.1.2272.1.100.9.10.1.3 | Columnrc2kAtmPortStatsOutCells | read-only | current | Number of Cells transmitted by ATM interface |
| 1.3.6.1.4.1.2272.1.100.9.10.1.4 | Columnrc2kAtmPortStatsOutIdleCells | read-only | current | Number of Idle Cells transmitted |
| 1.3.6.1.4.1.2272.1.100.9.10.1.5 | Columnrc2kAtmPortStatsInHecCorrected | read-only | current | Number of received cells in which HCS was corrected |
| 1.3.6.1.4.1.2272.1.100.9.10.1.6 | Columnrc2kAtmPortStatsInHecUncorrected | read-only | current | Number of received cells dropped because HCS couldn't be corrected |
| 1.3.6.1.4.1.2272.1.100.9.10.1.7 | Columnrc2kAtmPortStatsInUnknownProtos | read-only | current | Number of received cells dropped with wrong VPI/VCI |
| 1.3.6.1.4.1.2272.1.100.9.10.1.8 | Columnrc2kAtmPortStatsInPkts | read-only | current | Number of AAL5 CPCS PDUs received |
| 1.3.6.1.4.1.2272.1.100.9.10.1.9 | Columnrc2kAtmPortStatsOutPkts | read-only | current | Number of AAL5 CPCS PDUs transmitted |
| 1.3.6.1.4.1.2272.1.100.9.10.1.10 | Columnrc2kAtmPortStatsInDroppedPkts | read-only | current | Number of AAL5 CPCS PDUs dropped due to resource exhaustion |
| 1.3.6.1.4.1.2272.1.100.9.10.1.11 | Columnrc2kAtmPortStatsOutDroppedPkts | read-only | current | Number of AAL5 CPCS PDUs dropped because the transmitter closed the channel |
| 1.3.6.1.4.1.2272.1.100.9.11 | Tablerc2kAtmVPortStatsTable | not-accessible | current | ATM Elan statistics table |
| 1.3.6.1.4.1.2272.1.100.9.11.1 | Rowrc2kAtmVPortStatsEntry | not-accessible | current | Entry containing information of ATM Elan statistics |
| 1.3.6.1.4.1.2272.1.100.9.11.1.1 | Columnrc2kAtmVPortStatsIfIndex | read-only | current | port number |
| 1.3.6.1.4.1.2272.1.100.9.11.1.2 | Columnrc2kAtmVPortStatsVlanId | read-only | current | Vlan Id |
| 1.3.6.1.4.1.2272.1.100.9.11.1.3 | Columnrc2kAtmVPortStatsClear | read-write | current | Clear Elan Stats |
| 1.3.6.1.4.1.2272.1.100.9.11.1.4 | Columnrc2kAtmVPortStatsInOctets | read-only | current | AAL5 CPCS PDU octects received from ATM interface |
| 1.3.6.1.4.1.2272.1.100.9.11.1.5 | Columnrc2kAtmVPortStatsOutOctets | read-only | current | AAL5 CPCS PDU octects transmitted out of ATM interface |
| 1.3.6.1.4.1.2272.1.100.9.11.1.6 | Columnrc2kAtmVPortStatsInErrors | read-only | current | AAL5 CPCS PDUs received with errors from ATM interface. These errors include CRC-32 errors,SAR time-out errors And oversized SDU errors |
| 1.3.6.1.4.1.2272.1.100.9.11.1.7 | Columnrc2kAtmVPortStatsOutErrors | read-only | current | Number of AAL5 CPCS PDUs that couldn't be transmitted due to errors |
| 1.3.6.1.4.1.2272.1.100.9.11.1.8 | Columnrc2kAtmVPortStatsInDiscards | read-only | current | Number of received AAL5 CPCS PDUs discarded |
| 1.3.6.1.4.1.2272.1.100.9.11.1.9 | Columnrc2kAtmVPortStatsOutDiscards | read-only | current | Number of AAL5 CPCS PDUs which are to be transmitted but discarded |
| 1.3.6.1.4.1.2272.1.100.9.11.1.10 | Columnrc2kAtmVPortStatsInUcastPkts | read-only | current | Received ethernet/IP/IPX packets whose destination address is neither a multicast nor a broadcast address |
| 1.3.6.1.4.1.2272.1.100.9.11.1.11 | Columnrc2kAtmVPortStatsOutUcastPkts | read-only | current | Forwarded ethernet/IP/IPX packets whose destination address is neither a multicast nor a broadcast address |
| 1.3.6.1.4.1.2272.1.100.9.11.1.12 | Columnrc2kAtmVPortStatsInMulticastPkts | read-only | current | Received ethernet/IP/IPX packets whose destination MAC address(or IP address in case of IP ELAN type) is multicast MAC address or class D IP address (in case o… |
| 1.3.6.1.4.1.2272.1.100.9.11.1.13 | Columnrc2kAtmVPortStatsOutMulticastPkts | read-only | current | Forwarded ethernet/IP/IPX packets whose destination MAC address(or IP address in case of IP ELAN type) is multicast MAC address or class D IP address (in case … |
| 1.3.6.1.4.1.2272.1.100.9.11.1.14 | Columnrc2kAtmVPortStatsInBroadcastPkts | read-only | current | Received ethernet/IP/IPX packets whose destination address in broadcast address |
| 1.3.6.1.4.1.2272.1.100.9.11.1.15 | Columnrc2kAtmVPortStatsOutBroadcastPkts | read-only | current | Forwarded ethernet/IP/IPX packets whose destination address in broadcast address |
| 1.3.6.1.4.1.2272.1.100.10 | Tablerc2kMdaCardTable | not-accessible | current | Mda card table |
| 1.3.6.1.4.1.2272.1.100.10.1 | Rowrc2kMdaCardEntry | not-accessible | current | Entry containing information of Mda card |
| 1.3.6.1.4.1.2272.1.100.10.1.1 | Columnrc2kMdaCardSlotNum | read-only | current | Slot number |
| 1.3.6.1.4.1.2272.1.100.10.1.2 | Columnrc2kMdaCardMdaNum | read-only | current | MDA number within slot. MDAs are numbered from left to right. |
| 1.3.6.1.4.1.2272.1.100.10.1.3 | Columnrc2kMdaCardType | read-only | current | Refer to rc2kCardFrontType for the encoding scheme |
| 1.3.6.1.4.1.2272.1.100.10.1.4 | Columnrc2kMdaCardDescription | read-only | current | description of mda card |
| 1.3.6.1.4.1.2272.1.100.10.1.5 | Columnrc2kMdaCardAdminStatus | read-write | current | administration status of mda card |
| 1.3.6.1.4.1.2272.1.100.10.1.6 | Columnrc2kMdaCardOperStatus | read-only | current | operation status of mda card. |
| 1.3.6.1.4.1.2272.1.100.10.1.7 | Columnrc2kMdaCardSerialNum | read-only | current | serial number of mad card |
| 1.3.6.1.4.1.2272.1.100.10.1.8 | Columnrc2kMdaCardHwVersion | read-only | current | hardware version of mda card |
| 1.3.6.1.4.1.2272.1.100.10.1.9 | Columnrc2kMdaCardPartNumber | read-only | current | part number of mda card |
| 1.3.6.1.4.1.2272.1.100.10.1.10 | Columnrc2kMdaCardDateCode | read-only | current | date code of mda card |
| 1.3.6.1.4.1.2272.1.100.10.1.11 | Columnrc2kMdaCardDeviations | read-only | current | hardware deviation information of mda card |
| 1.3.6.1.4.1.2272.1.100.10.1.12 | Columnrc2kMdaCardMacAddr | read-only | current | base mac address of mda card |
| 1.3.6.1.4.1.2272.1.100.10.1.13 | Columnrc2kMdaCardNumPorts | read-only | current | number of ports on mda card |
| 1.3.6.1.4.1.2272.1.100.10.1.14 | Columnrc2kMdaCardFirstIfIndex | read-only | current | first ifindex number on mda card |
| 1.3.6.1.4.1.2272.1.100.10.1.15 | Columnrc2kMdaCardLastIfIndex | read-only | current | last ifindex number on mda card |
| 1.3.6.1.4.1.2272.1.100.11 | Tablerc2kCpuEthernetPortRouteTable | not-accessible | current | 2k CPU Ethernet Port Route table |
| 1.3.6.1.4.1.2272.1.100.11.1 | Rowrc2kCpuEthernetPortRouteEntry | not-accessible | current | Entry containing information of 2k CPU Ethernet Port |
| 1.3.6.1.4.1.2272.1.100.11.1.1 | Columnrc2kCpuEthernetPortRouteNetwork | read-write | current | Used to configure the network that can be used to remotely manage this device. |
| 1.3.6.1.4.1.2272.1.100.11.1.2 | Columnrc2kCpuEthernetPortRouteGateway | read-write | current | Used to configure the the IP address of the gateway that should be used to forward IP traffic. |
| 1.3.6.1.4.1.2272.1.100.11.1.3 | Columnrc2kCpuEthernetPortRouteRowStatus | read-write | current | row status |
| 1.3.6.1.4.1.2272.1.100.12 | Noderc2kCPUTypeGeneralGroup | |||
| 1.3.6.1.4.1.2272.1.100.12.1 | Scalarrc2kCPUTypePrimary | read-only | current | Used to identify the type of primary CPU |
| 1.3.6.1.4.1.2272.1.100.12.2 | Scalarrc2kCPUTypeSecondary | read-only | current | Used to identify the type of secondary CPU |
| 1.3.6.1.4.1.2272.1.100.12.3 | Scalarrc2kCPUTypePrimaryMemory | read-only | current | Used to get the memory size of Primary CPU |
| 1.3.6.1.4.1.2272.1.100.12.4 | Scalarrc2kCPUTypeSecondaryMemory | read-only | current | Used to get the memory size of Secondary CPU |
| 1.3.6.1.4.1.2272.1.100.13 | Tablerc2kCpuEthernetPortIpv6RouteTable | not-accessible | current | 2k CPU Ethernet Port Route table for Ipv6 |
| 1.3.6.1.4.1.2272.1.100.13.1 | Rowrc2kCpuEthernetPortIpv6RouteEntry | not-accessible | current | Entry containing information of 2k CPU Ethernet Port Ipv6 |
| 1.3.6.1.4.1.2272.1.100.13.1.1 | Columnrc2kCpuEthernetPortIpv6RouteNetwork | not-accessible | current | Used to configure the ipv6 network that can be used to remotely manage this device. |
| 1.3.6.1.4.1.2272.1.100.13.1.2 | Columnrc2kCpuEthernetPortIpv6RoutePrefixLength | not-accessible | current | The length of the prefix (in bits). |
| 1.3.6.1.4.1.2272.1.100.13.1.3 | Columnrc2kCpuEthernetPortIpv6RouteGateway | not-accessible | current | Used to configure the the IPv6 address of the gateway that should be used to forward IPv6 traffic. |
| 1.3.6.1.4.1.2272.1.100.13.1.4 | Columnrc2kCpuEthernetPortIpv6RouteRowStatus | read-create | current | row status |
| 1.3.6.1.4.1.2272.1.100.14 | Tablerc2kCardModTable | not-accessible | current | RTM info table |
| 1.3.6.1.4.1.2272.1.100.14.1 | Rowrc2kCardModEntry | not-accessible | current | Entry containing RTM information |
| 1.3.6.1.4.1.2272.1.100.14.1.1 | Columnrc2kCardModIndex | not-accessible | current | slot number. |
| 1.3.6.1.4.1.2272.1.100.14.1.2 | Columnrc2kCardModPresent | read-only | current | Indicates if the RTM in this slot is present |
| 1.3.6.1.4.1.2272.1.100.14.1.3 | Columnrc2kCardModType | read-only | current | RTM type |
| 1.3.6.1.4.1.2272.1.100.14.1.4 | Columnrc2kCardModDescription | read-only | current | RTM description |
| 1.3.6.1.4.1.2272.1.100.14.1.5 | Columnrc2kCardModSerialNum | read-only | current | RTM serial number |
| 1.3.6.1.4.1.2272.1.100.14.1.6 | Columnrc2kCardModHwVersion | read-only | current | RTM hardware version |
| 1.3.6.1.4.1.2272.1.100.14.1.7 | Columnrc2kCardModPartNumber | read-only | current | RTM part number |
| 1.3.6.1.4.1.2272.1.100.14.1.8 | Columnrc2kCardModDateCode | read-only | current | RTM date code |
| 1.3.6.1.4.1.2272.1.100.14.1.9 | Columnrc2kCardModDeviations | read-only | current | RTM deviations |
| 1.3.6.1.4.1.2272.1.100.14.1.10 | Columnrc2kCardModCpldId | read-only | current | RTM CPLD ID value |
| 1.3.6.1.4.1.2272.1.100.14.1.11 | Columnrc2kCardModCpldRev | read-only | current | RTM CPLD revision value |
| 1.3.6.1.4.1.2272.1.100.15 | Tablerc2kCardPerfTable | not-accessible | current | This table represents the Card/Slot level DRAM size, DRAM Used, DRAM Free and CPU Utilization for the R Module and RC Module cards |
| 1.3.6.1.4.1.2272.1.100.15.1 | Rowrc2kCardPerfEntry | not-accessible | current | Entry containing information of Card performance |
| 1.3.6.1.4.1.2272.1.100.15.1.1 | Columnrc2kCardPerfId | not-accessible | current | This represents the slot number. This is only for line cards, slot 5 and 6 should not be used. |
| 1.3.6.1.4.1.2272.1.100.15.1.2 | Columnrc2kCardPerfDramSize | read-only | current | This represents DRAM Size in Mega bytes |
| 1.3.6.1.4.1.2272.1.100.15.1.3 | Columnrc2kCardPerfDramUsed | read-only | current | This represents the amount of DRAM used in kilo bytes |
| 1.3.6.1.4.1.2272.1.100.15.1.4 | Columnrc2kCardPerfDramFree | read-only | current | This represents the amount of DRAM Free in kilo bytes |
| 1.3.6.1.4.1.2272.1.100.15.1.5 | Columnrc2kCardPerfCPUUtilization | read-only | current | This represents the percentage of CPU utilization |
| 1.3.6.1.4.1.2272.1.100.16 | Tablerc2kSysAggrRateLimiterStatsTable | not-accessible | current | This table represents the Card/Slot level Aggregate rate limiter stats for power ranger cards. |
| 1.3.6.1.4.1.2272.1.100.16.1 | Rowrc2kSysAggrRateLimiterStatsEntry | not-accessible | current | Card/Slot level Aggregate rate limiter stats for power ranger cards indexed by slot number |
| 1.3.6.1.4.1.2272.1.100.16.1.1 | Columnrc2kSysAggrRateLimiterStatsId | not-accessible | current | This represents the slot number. This is only for line cards, slot 5 and 6 should not be used. |
| 1.3.6.1.4.1.2272.1.100.16.1.2 | Columnrc2kSysAggrRateLimiterIngGreenLane0 | read-only | current | Number of packets passed or marked green by the Ingress Aggregate rate limiter |
| 1.3.6.1.4.1.2272.1.100.16.1.3 | Columnrc2kSysAggrRateLimiterIngRedLane0 | read-only | current | Number of packets dropped or marked red by the Ingress Aggregate rate limiter |
| 1.3.6.1.4.1.2272.1.100.16.1.4 | Columnrc2kSysAggrRateLimiterEgrGreenLane0 | read-only | current | Number of packets passed or marked green by the Egress Aggregate rate limiter |
| 1.3.6.1.4.1.2272.1.100.16.1.5 | Columnrc2kSysAggrRateLimiterEgrRedLane0 | read-only | current | Number of packets dropped or marked red by the Egress Aggregate rate limiter |
| 1.3.6.1.4.1.2272.1.100.16.1.6 | Columnrc2kSysAggrRateLimiterIngGreenLane1 | read-only | current | Number of packets passed or marked green by the Ingress Aggregate rate limiter |
| 1.3.6.1.4.1.2272.1.100.16.1.7 | Columnrc2kSysAggrRateLimiterIngRedLane1 | read-only | current | Number of packets dropped or marked red by the Ingress Aggregate rate limiter |
| 1.3.6.1.4.1.2272.1.100.16.1.8 | Columnrc2kSysAggrRateLimiterEgrGreenLane1 | read-only | current | Number of packets passed or marked green by the Egress Aggregate rate limiter |
| 1.3.6.1.4.1.2272.1.100.16.1.9 | Columnrc2kSysAggrRateLimiterEgrRedLane1 | read-only | current | Number of packets dropped or marked red by the Egress Aggregate rate limiter |
| 1.3.6.1.4.1.2272.1.100.16.1.10 | Columnrc2kSysAggrRateLimiterIngGreenLane2 | read-only | current | Number of packets passed or marked green by the Ingress Aggregate rate limiter |
| 1.3.6.1.4.1.2272.1.100.16.1.11 | Columnrc2kSysAggrRateLimiterIngRedLane2 | read-only | current | Number of packets dropped or marked red by the Ingress Aggregate rate limiter |
| 1.3.6.1.4.1.2272.1.100.16.1.12 | Columnrc2kSysAggrRateLimiterEgrGreenLane2 | read-only | current | Number of packets passed or marked green by the Egress Aggregate rate limiter |
| 1.3.6.1.4.1.2272.1.100.16.1.13 | Columnrc2kSysAggrRateLimiterEgrRedLane2 | read-only | current | Number of packets dropped or marked red by the Egress Aggregate rate limiter |
| 1.3.6.1.4.1.2272.1.100.16.1.14 | Columnrc2kSysAggrRateLimiterStatsClear | read-write | current | Clear the Aggregate Rate limiter Stats |
| 1.3.6.1.4.1.2272.1.100.17 | Tablerc2kPowerConsumptionInfoTable | not-accessible | current | Power consumption info table for all slots |
| 1.3.6.1.4.1.2272.1.100.17.1 | Rowrc2kPowerConsumptionInfoEntry | not-accessible | current | Entry containing power consumption information of the slot |
| 1.3.6.1.4.1.2272.1.100.17.1.1 | Columnrc2kPowerConsumptionInfoIndex | not-accessible | current | Slot number. |
| 1.3.6.1.4.1.2272.1.100.17.1.2 | Columnrc2kPowerConsumptionInfoPowerStatus | read-only | current | Power operation status of this slot |
| 1.3.6.1.4.1.2272.1.100.17.1.3 | Columnrc2kPowerConsumptionInfoBasePower | read-only | current | The base power required for this slot |
| 1.3.6.1.4.1.2272.1.100.17.1.4 | Columnrc2kPowerConsumptionInfoConsumedPower | read-only | current | The actual consumed power of this slot. Value will be set zero when Power status is 'off' rc2kPowerConsumptionInfoPowerStatus |
| 1.3.6.1.4.1.2272.1.100.17.1.5 | Columnrc2kPowerConsumptionInfoPowerPriority | read-only | current | Used to indicate the priority of the slot for power management |
| 1.3.6.1.4.1.2272.1.100.17.1.6 | Columnrc2kPowerConsumptionInfoSlotDescription | read-only | current | User to indicate the slot type information. Such as, 'Slot1'..'Slot12', 'SF1'..'SF4'..etc |
| 1.3.6.1.4.1.2272.1.100.17.1.7 | Columnrc2kPowerConsumptionInfoCardDescription | read-only | current | Hardware description of this card |
| 1.3.6.1.4.1.2272.1.100.18 | Tablerc2kTemperatureTable | not-accessible | current | Table for retrieving the temperatures of each card (CP, IO, SF) on the chassis |
| 1.3.6.1.4.1.2272.1.100.18.1 | Rowrc2kTemperatureEntry | not-accessible | current | Contains information regarding the temperature of each slot (CP, IO and SF) on the chassis. |
| 1.3.6.1.4.1.2272.1.100.18.1.1 | Columnrc2kTemperatureSlotIndex | not-accessible | current | Slot number of either a CP (1,2) or IO (3-12) or SF (21-26). |
| 1.3.6.1.4.1.2272.1.100.18.1.2 | Columnrc2kTemperatureSlotDescription | read-only | current | Used to indicate the slot type information. Such as, 'Slot1'..'Slot12', 'SF1'..'SF4'..etc. |
| 1.3.6.1.4.1.2272.1.100.18.1.3 | Columnrc2kTemperatureZone1Temperature | read-only | current | Zone 1 temperature measured in celsius degree |
| 1.3.6.1.4.1.2272.1.100.18.1.4 | Columnrc2kTemperatureZone2Temperature | read-only | current | Zone 2 temperature measured in celsius degree. A value of 0 for this mib object indicates that Zone 2 is not available on this slot. |
| 1.3.6.1.4.1.2272.1.100.18.1.5 | Columnrc2kTemperatureZone3Temperature | read-only | current | Zone 3 temperature measured in celsius degree. A value of 0 for this mib object indicates that Zone 3 is not available on this slot. |
| 1.3.6.1.4.1.2272.1.100.18.1.6 | Columnrc2kTemperatureZone4Temperature | read-only | current | Zone 4 temperature measured in celsius degree |
| 1.3.6.1.4.1.2272.1.100.18.1.7 | Columnrc2kTemperatureZone5Temperature | read-only | current | Zone 5 temperature measured in celsius degree. A value of 0 for this mib object indicates that Zone 5 is not available on this slot. |
| 1.3.6.1.4.1.2272.1.100.18.1.8 | Columnrc2kTemperatureHighTemperature | read-only | current | Highest temperature measured in celsius degree |
| 1.3.6.1.4.1.2272.1.100.18.1.9 | Columnrc2kTemperatureLowTemperature | read-only | current | Lowest temperature measured in celsius degree |
| 1.3.6.1.4.1.2272.1.100.18.1.10 | Columnrc2kTemperatureAlarmThreshold | read-only | current | When the card temperature crosses this threshold, an alarm will be set. |
| 1.3.6.1.4.1.2272.1.100.18.1.11 | Columnrc2kTemperatureShutdownThreshold | read-only | current | When the card temperature crosses this threshold, the card will be shutdown. |
| 1.3.6.1.4.1.2272.1.100.19 | Tablerc2kUsbTable | not-accessible | current | Table for retrieving the data for the USBs inserted on the chassis |
| 1.3.6.1.4.1.2272.1.100.19.1 | Rowrc2kUsbEntry | not-accessible | current | Contains information regarding the data for USBs inserted on the chassis |
| 1.3.6.1.4.1.2272.1.100.19.1.1 | Columnrc2kUsbSlotIndex | not-accessible | current | Slot number of CP in which USB is inserted. |
| 1.3.6.1.4.1.2272.1.100.19.1.2 | Columnrc2kUsbSlotDescription | read-only | current | Used to indicate the slot type information. Such as, 'Slot1'..'Slot2. |
| 1.3.6.1.4.1.2272.1.100.19.1.3 | Columnrc2kUsbVendorId | read-only | current | Indicates the Vendor Id for the inserted USB. Value is assigned by USB-IF. |
| 1.3.6.1.4.1.2272.1.100.19.1.4 | Columnrc2kUsbManufacturer | read-only | current | Indicates the Manufacturer for the inserted USB. |
| 1.3.6.1.4.1.2272.1.100.19.1.5 | Columnrc2kUsbProductId | read-only | current | Indicates the Product Id for the inserted USB. Value is assigned by manufacturer. |
| 1.3.6.1.4.1.2272.1.100.19.1.6 | Columnrc2kUsbProductName | read-only | current | Indicates the Product Name for the inserted USB. |
| 1.3.6.1.4.1.2272.1.100.19.1.7 | Columnrc2kUsbSerialNumber | read-only | current | Indicates the Serial Number for the inserted USB. |
| 1.3.6.1.4.1.2272.1.100.19.1.8 | Columnrc2kUsbRevision | read-only | current | Indicates the release number for the inserted USB. |
| 1.3.6.1.4.1.2272.1.100.19.1.9 | Columnrc2kUsbMaxCurrent | read-only | current | Returns the Max Power as defined by specification for the inserted USB. The units are milliamps. |
| 1.3.6.1.4.1.2272.1.100.20 | Tablerc2kCardAsicInfoTable | not-accessible | current | A table that contains asic information that is specific to a forwarding slice on a second generation IO module. |
| 1.3.6.1.4.1.2272.1.100.20.1 | Rowrc2kCardAsicInfoEntry | not-accessible | current | Second Generation Card attributes |
| 1.3.6.1.4.1.2272.1.100.20.1.1 | Columnrc2kCardAsicInfoIndex | not-accessible | current | A unique value for each module within the chassis. This value is determined by the chassis slot number where the module is inserted. Valid entries are 3 to the… |
| 1.3.6.1.4.1.2272.1.100.20.1.2 | Columnrc2kCardAsicInfoForwardingSlice | not-accessible | current | A unique value for each forwarding slice on the card. |
| 1.3.6.1.4.1.2272.1.100.20.1.3 | Columnrc2kCardAsicInfoQE | read-only | current | QE version for the forwarding slice on IO card |
| 1.3.6.1.4.1.2272.1.100.20.1.4 | Columnrc2kCardAsicInfoZagrosFpga | read-only | current | Zagros FPGA for the forwarding slice on IO card |
| 1.3.6.1.4.1.2272.1.100.20.1.5 | Columnrc2kCardAsicInfoRsp | read-only | current | RSP for the forwarding slice on IO card |
| 1.3.6.1.4.1.2272.1.100.20.1.6 | Columnrc2kCardAsicInfoPhyRev | read-only | current | PHY revision for the forwarding slice on IO card |
| 1.3.6.1.4.1.2272.1.100.21 | Tablerc2kIoCardTemperatureTable | not-accessible | current | Table for retrieving the temperatures the sensors located on the FPGA's and FA's on the generation 2 IO cards. |
| 1.3.6.1.4.1.2272.1.100.21.1 | Rowrc2kIoCardTemperatureEntry | not-accessible | current | Contains information regarding the temperatures of FPGA's and FA's on the generation 2 IO cards. |
| 1.3.6.1.4.1.2272.1.100.21.1.1 | Columnrc2kIoCardTemperatureSlotIndex | not-accessible | current | Slot number of the IO card |
| 1.3.6.1.4.1.2272.1.100.21.1.2 | Columnrc2kIoCardTemperatureFPGASensor1Temperature | read-only | current | Temperature of the FPGA Sensor 1, located on the Zagros on the first slice, measured in celsius degrees. A value of 0 for this mib object indicates that this s… |
| 1.3.6.1.4.1.2272.1.100.21.1.3 | Columnrc2kIoCardTemperatureFPGASensor2Temperature | read-only | current | Temperature of the FPGA Sensor 2, located on the Zagros on the first slice, measured in celsius degrees. A value of 0 for this mib object indicates that this s… |
| 1.3.6.1.4.1.2272.1.100.21.1.4 | Columnrc2kIoCardTemperatureFPGASensor3Temperature | read-only | current | Temperature of the FPGA Sensor 3, located on the RSP on the first slice, measured in celsius degrees. A value of 0 for this mib object indicates that this sens… |
| 1.3.6.1.4.1.2272.1.100.21.1.5 | Columnrc2kIoCardTemperatureFPGASensor4Temperature | read-only | current | Temperature of the FPGA Sensor 4, located on the Zagros on the second slice, measured in celsius degrees. A value of 0 for this mib object indicates that this … |
| 1.3.6.1.4.1.2272.1.100.21.1.6 | Columnrc2kIoCardTemperatureFPGASensor5Temperature | read-only | current | Temperature of the FPGA Sensor 5, located on the Zagros on the second slice, measured in celsius degrees. A value of 0 for this mib object indicates that this … |
| 1.3.6.1.4.1.2272.1.100.21.1.7 | Columnrc2kIoCardTemperatureFPGASensor6Temperature | read-only | current | Temperature of the FPGA Sensor 6, located on the RSP on the second slice, measured in celsius degrees. A value of 0 for this mib object indicates that this sen… |
| 1.3.6.1.4.1.2272.1.100.21.1.8 | Columnrc2kIoCardTemperatureFPGASensor7Temperature | read-only | current | Temperature of the FPGA Sensor 7, located on the Zagros on the third slice, measured in celsius degrees. A value of 0 for this mib object indicates that this s… |
| 1.3.6.1.4.1.2272.1.100.21.1.9 | Columnrc2kIoCardTemperatureFPGASensor8Temperature | read-only | current | Temperature of the FPGA Sensor 8, located on the Zagros on the third slice, measured in celsius degrees. A value of 0 for this mib object indicates that this s… |
| 1.3.6.1.4.1.2272.1.100.21.1.10 | Columnrc2kIoCardTemperatureFPGASensor9Temperature | read-only | current | Temperature of the FPGA Sensor 9, located on the RSP on the third slice, measured in celsius degrees. A value of 0 for this mib object indicates that this sens… |
| 1.3.6.1.4.1.2272.1.100.21.1.11 | Columnrc2kIoCardTemperatureFPGAZoneHighTemperature | read-only | current | Highest temperature of all the FPGA sensors located on this IO card, measured in celsius degrees. |
| 1.3.6.1.4.1.2272.1.100.21.1.12 | Columnrc2kIoCardTemperatureFPGAZoneLowTemperature | read-only | current | Lowest temperature of all the FPGA sensors located on this IO card, measured in celsius degrees. |
| 1.3.6.1.4.1.2272.1.100.21.1.13 | Columnrc2kIoCardTemperatureFPGAZoneAlarmThreshold | read-only | current | When the FPGA temperature crosses this threshold on this IO card, an alarm will be set. |
| 1.3.6.1.4.1.2272.1.100.21.1.14 | Columnrc2kIoCardTemperatureFPGAZoneShutdownThreshold | read-only | current | When the FPGA temperature crosses this threshold on this IO card, the card will be shutdown. |
| 1.3.6.1.4.1.2272.1.100.21.1.15 | Columnrc2kIoCardTemperatureFASensor1Temperature | read-only | current | Temperature of the FA Sensor 1, located on the first slice, measured in celsius degrees. A value of 0 for this mib object indicates that this sensor is not ava… |
| 1.3.6.1.4.1.2272.1.100.21.1.16 | Columnrc2kIoCardTemperatureFASensor2Temperature | read-only | current | Temperature of the FA Sensor 2, located on the second slice, measured in celsius degrees. A value of 0 for this mib object indicates that this sensor is not av… |
| 1.3.6.1.4.1.2272.1.100.21.1.17 | Columnrc2kIoCardTemperatureFASensor3Temperature | read-only | current | Temperature of the FA Sensor 3, located on the third slice, measured in celsius degrees. A value of 0 for this mib object indicates that this sensor is not ava… |
| 1.3.6.1.4.1.2272.1.100.21.1.18 | Columnrc2kIoCardTemperatureFAZoneHighTemperature | read-only | current | Highest temperature of all the FA sensors located on this IO card, measured in celsius degrees. |
| 1.3.6.1.4.1.2272.1.100.21.1.19 | Columnrc2kIoCardTemperatureFAZoneLowTemperature | read-only | current | Lowest temperature of all the FA sensors located on this IO card, measured in celsius degrees. |
| 1.3.6.1.4.1.2272.1.100.21.1.20 | Columnrc2kIoCardTemperatureFAZoneAlarmThreshold | read-only | current | When the FA temperature crosses this threshold on this IO card, an alarm will be set. |
| 1.3.6.1.4.1.2272.1.100.21.1.21 | Columnrc2kIoCardTemperatureFAZoneShutdownThreshold | read-only | current | When the FA temperature crosses this threshold on this IO card, the card will be shutdown. |
| 1.3.6.1.4.1.2272.1.100.22 | Tablerc2kBootConfigHostTable | not-accessible | current | Table for the bootconfig host info on the device |
| 1.3.6.1.4.1.2272.1.100.22.1 | Rowrc2kBootConfigHostEntry | not-accessible | current | Entry containing boot config host information. |
| 1.3.6.1.4.1.2272.1.100.22.1.1 | Columnrc2kBootConfigHostSlot | read-only | current | slot number, VSP uses 1,2 |
| 1.3.6.1.4.1.2272.1.100.22.1.2 | Columnrc2kBootConfigHostTftpHash | read-write | current | Enables tftp hashing |
| 1.3.6.1.4.1.2272.1.100.22.1.3 | Columnrc2kBootConfigHostTftpRetransmit | read-write | current | Set tftp retransmit timeout counter |
| 1.3.6.1.4.1.2272.1.100.22.1.4 | Columnrc2kBootConfigHostTftpTimeout | read-write | current | Set tftp timeout counter |
| 1.3.6.1.4.1.2272.1.100.22.1.5 | Columnrc2kBootConfigHostUser | read-write | current | Configure host user |
| 1.3.6.1.4.1.2272.1.100.22.1.6 | Columnrc2kBootConfigHostPassword | read-write | current | Configure host password |
| 1.3.6.1.4.1.2272.1.101 | NodercVossSystem | |||
| 1.3.6.1.4.1.2272.1.101.1 | NodercVossSystemMib | |||
| 1.3.6.1.4.1.2272.1.101.1.1 | NodercVossSystemObjects | |||
| 1.3.6.1.4.1.2272.1.101.1.1.1 | NodercVossSystemScalars | |||
| 1.3.6.1.4.1.2272.1.101.1.1.2 | TablercVossSystemTemperatureTable | not-accessible | current | Table for retrieving the temperatures of each temperature sensor for Single CP system |
| 1.3.6.1.4.1.2272.1.101.1.1.2.1 | RowrcVossSystemTemperatureEntry | not-accessible | current | Contains information regarding the temperature of each sensor on the device. |
| 1.3.6.1.4.1.2272.1.101.1.1.2.1.1 | ColumnrcVossSystemTemperatureSensorIndex | not-accessible | current | Temperature Sensor Index. The range depends on the number of sensors on the device. For CN3240 device, there are 4 temperature sensors |
| 1.3.6.1.4.1.2272.1.101.1.1.2.1.2 | ColumnrcVossSystemTemperatureSensorDescription | read-only | current | Used to describle the name of the sensor |
| 1.3.6.1.4.1.2272.1.101.1.1.2.1.3 | ColumnrcVossSystemTemperatureTemperature | read-only | current | Sensor temperature measured in celsius degree |
| 1.3.6.1.4.1.2272.1.101.1.1.2.1.4 | ColumnrcVossSystemTemperatureWarningThreshold | read-only | current | Temperature value of Warning threshold of this sensor. When the temperature crosses this threshold, a warning message will be generated |
| 1.3.6.1.4.1.2272.1.101.1.1.2.1.5 | ColumnrcVossSystemTemperatureCriticalThreshold | read-only | current | Temperature value of Critical threshold of this sensor. When the temperature crosses this threshold, whether the system is being shutdown or a critical message… |
| 1.3.6.1.4.1.2272.1.101.1.1.2.1.6 | ColumnrcVossSystemTemperatureStatus | read-only | current | Indicates the current temperature status based on the. Warning and critical Threshold |
| 1.3.6.1.4.1.2272.1.101.1.1.3 | TablercVossSystemFanTrayInfoTable | not-accessible | current | Table for the fan tray module info on the device |
| 1.3.6.1.4.1.2272.1.101.1.1.3.1 | RowrcVossSystemFanTrayInfoEntry | not-accessible | current | Contains information regarding a fan tray unit |
| 1.3.6.1.4.1.2272.1.101.1.1.3.1.1 | ColumnrcVossSystemFanTrayInfoTrayId | not-accessible | current | Fan tray ID. 3 trays on the device DSG8032, 3 trays on the device DSG9032 4 trays on the device DSG8064 |
| 1.3.6.1.4.1.2272.1.101.1.1.3.1.2 | ColumnrcVossSystemFanTrayInfoDescription | read-only | current | Description of the fan tray |
| 1.3.6.1.4.1.2272.1.101.1.1.3.1.3 | ColumnrcVossSystemFanTrayInfoSerialNumber | read-only | current | The fan tray serial number. |
| 1.3.6.1.4.1.2272.1.101.1.1.3.1.4 | ColumnrcVossSystemFanTrayInfoPartNumber | read-only | current | The fan tray part number. |
| 1.3.6.1.4.1.2272.1.101.1.1.3.1.5 | ColumnrcVossSystemFanTrayInfoFlowType | read-only | current | Direction of the Fan Flow: - unknown(1) - Flow can not be determined. - fronttoback(2) - Front to back flow. - backtofront(3) - Back to front flow. |
| 1.3.6.1.4.1.2272.1.101.1.1.4 | TablercVossSystemFanInfoTable | not-accessible | current | Table for the fan info on each fan tray on device this |
| 1.3.6.1.4.1.2272.1.101.1.1.4.1 | RowrcVossSystemFanInfoEntry | not-accessible | current | Contains information regarding a fan tray unit |
| 1.3.6.1.4.1.2272.1.101.1.1.4.1.1 | ColumnrcVossSystemFanInfoTrayId | not-accessible | current | FanInfo tray ID. 3 trays on the device CN3240 |
| 1.3.6.1.4.1.2272.1.101.1.1.4.1.2 | ColumnrcVossSystemFanInfoFanId | not-accessible | current | FanInfo unit ID on a fan tray. Each FanInfo tray has 2 fans on the device CN3240 |
| 1.3.6.1.4.1.2272.1.101.1.1.4.1.3 | ColumnrcVossSystemFanInfoDescription | read-only | current | Description of the fan tray |
| 1.3.6.1.4.1.2272.1.101.1.1.4.1.4 | ColumnrcVossSystemFanInfoOperStatus | read-only | current | Actual status of the FanInfo: - unknown(1) - status can not be determined. - up(2) - present and supplying power. - down(3) - present, but failure indicated. |
| 1.3.6.1.4.1.2272.1.101.1.1.4.1.5 | ColumnrcVossSystemFanInfoOperSpeed | read-only | current | Indicate the cuurent operational speed of the fan |
| 1.3.6.1.4.1.2272.1.101.1.1.7 | TablercVossUsbTable | not-accessible | current | Table for the USB module info on the device |
| 1.3.6.1.4.1.2272.1.101.1.1.7.1 | RowrcVossUsbEntry | not-accessible | current | Contains information regarding a USB module |
| 1.3.6.1.4.1.2272.1.101.1.1.7.1.1 | ColumnrcVossUsbTrayId | not-accessible | current | The Index of USB |
| 1.3.6.1.4.1.2272.1.101.1.1.7.1.2 | ColumnrcVossUsbStatus | read-only | current | The present status of the USB storage |
| 1.3.6.1.4.1.2272.1.101.1.1.7.1.3 | ColumnrcVossUsbDescription | read-only | current | Description of USB |
| 1.3.6.1.4.1.2272.1.102 | NodercCliSystem | |||
| 1.3.6.1.4.1.2272.1.102.1 | NodercCliSystemMib | |||
| 1.3.6.1.4.1.2272.1.102.1.1 | NodercCliSystemObjects | |||
| 1.3.6.1.4.1.2272.1.102.1.1.1 | NodercCliCustom | |||
| 1.3.6.1.4.1.2272.1.102.1.1.1.1 | ScalarrcCliCustomBannerText | read-only | current | CLI customer banner. if object rcCliCustomBannerEnable is not true, the customer banner will not be shown on CLI session |
| 1.3.6.1.4.1.2272.1.102.1.1.1.2 | ScalarrcCliCustomBannerEnable | read-only | current | Indicates wthether the customer banner rcCliCustomBannerText is shown on the CLI session |
| 1.3.6.1.4.1.2272.1.103 | NodercSmtp | |||
| 1.3.6.1.4.1.2272.1.103.1 | NodercSmtpMib | |||
| 1.3.6.1.4.1.2272.1.103.1.1 | NodercSmtpObjects | |||
| 1.3.6.1.4.1.2272.1.103.1.1.1 | NodercSmtpGlobal | |||
| 1.3.6.1.4.1.2272.1.103.1.1.1.1 | ScalarrcSmtpGlobalServerAddressType | read-write | current | The address type of Server (rcSmtpGlobalServerAddress) |
| 1.3.6.1.4.1.2272.1.103.1.1.1.2 | ScalarrcSmtpGlobalServerAddress | read-write | current | SMTP server address. It is associated with rcSmtpGlobalServerAddressType |
| 1.3.6.1.4.1.2272.1.103.1.1.1.3 | ScalarrcSmtpGlobalReceiverEmailsList | read-write | current | A list of email addresses which separated by comma. Maximum length of each email address cannot exceeds 254 characters. 1274 can support up 5 email addresses a… |
| 1.3.6.1.4.1.2272.1.103.1.1.1.4 | ScalarrcSmtpGlobalNumOfEmails | read-only | current | Total number of email address in object rcSmtpGlobalReceiverEmails |
| 1.3.6.1.4.1.2272.1.103.1.1.1.5 | ScalarrcSmtpGlobalSenderEmail | read-write | current | Sender email addresses which is used as from field to send to the receiver email (rcSmtpGlobalReceiverEmailsList) |
| 1.3.6.1.4.1.2272.1.103.1.1.1.6 | ScalarrcSmtpGlobalPort | read-write | current | The TCP port of the Email server in object rcSmtpGlobalServerAddress. The default SMTP port is 25 |
| 1.3.6.1.4.1.2272.1.103.1.1.1.7 | ScalarrcSmtpGlobalSystemStatusSendTimer | read-write | current | The system informatin email period, in seconds. This timer is for emailing system information. It is not for sending the logging event information. 0 means not… |
| 1.3.6.1.4.1.2272.1.103.1.1.1.8 | ScalarrcSmtpGlobalEnable | read-write | current | Adminstratively Enable/disable this SMTP protocol |
| 1.3.6.1.4.1.2272.1.103.1.1.1.9 | ScalarrcSmtpGlobalLogEventIds | read-write | current | A list of active event IDs whicd are currently sending by emial. It includes the default event IDs also (rcSmtpGlobalDefaultLogEventIds). This object can be us… |
| 1.3.6.1.4.1.2272.1.103.1.1.1.10 | ScalarrcSmtpGlobalNumOfEventIds | read-only | current | Total number of event ID in object rcSmtpGlobalLogEventIds |
| 1.3.6.1.4.1.2272.1.103.1.1.1.11 | ScalarrcSmtpGlobalDefaultLogEventIds | read-only | current | This is a default list of event IDs which the email will send by default. They will be added to Logging list (rcSmtpGlobalLogEventIds) when device boot up. If … |
| 1.3.6.1.4.1.2272.1.103.1.1.1.12 | ScalarrcSmtpGlobalNumOfDefaultEventIds | read-only | current | Total number of event ID in the default list object rcSmtpGlobalDefaultLogEventIds |
| 1.3.6.1.4.1.2272.1.103.1.1.1.13 | ScalarrcSmtpGlobalDomainName | read-write | current | smtp domain name |
| 1.3.6.1.4.1.2272.1.200 | NodercOm8k | |||
| 1.3.6.1.4.1.2272.1.201 | Nodecobra | |||
| 1.3.6.1.4.1.2272.1.202 | NodercPowerRanger | |||
| 1.3.6.1.4.1.2272.1.202.1 | NodercPowerRangerMib | |||
| 1.3.6.1.4.1.2272.1.202.1.0 | NodercPowerRangerNotifications | |||
| 1.3.6.1.4.1.2272.1.202.1.1 | NodercPowerRangerObjects | |||
| 1.3.6.1.4.1.2272.1.202.1.1.1 | NodercPrQos | |||
| 1.3.6.1.4.1.2272.1.202.1.1.1.1 | NodercPrQosScalars | |||
| 1.3.6.1.4.1.2272.1.202.1.1.1.1.1 | ScalarrcPrQosPolicyNumPolicies | read-only | current | A list of Global Policer (GPID) entries. The number of entries is given by rcPrQosPolicyNumPolicies. |
| 1.3.6.1.4.1.2272.1.202.1.1.1.1.2 | ScalarrcPrQosTxQueueNumTemplates | read-only | current | The number of egress queue templates currently defined in the switch. |
| 1.3.6.1.4.1.2272.1.202.1.1.1.1.3 | ScalarrcPrQosFlowPolicerStatsClear | read-write | current | Clear all box-wide policer statistics. |
| 1.3.6.1.4.1.2272.1.202.1.1.1.1.4 | ScalarrcPrQosLossless8021p | read-write | current | The value used to map Ingress IEEE 1p to lossless internal Qos when lossless Ethernet mode is enabled. |
| 1.3.6.1.4.1.2272.1.202.1.1.1.1.5 | ScalarrcPrQosLosslessPfcEnabled | read-only | current | If true then at least one lossless port in the switch has been configured with the value of rcPortLosslessEnetPauseType set to pfc(2). If false then either all… |
| 1.3.6.1.4.1.2272.1.202.1.1.1.1.6 | ScalarrcPrQosLosslessPortsEnablePending | read-write | current | This object is used to inform the system which ports are pending lossless enable and is for internal use. |
| 1.3.6.1.4.1.2272.1.202.1.1.1.1.7 | ScalarrcPrQosLosslessPortsOperPending | read-only | current | Indicates which ports which would be brought down operationally if the set of ports indicated in rcPrQosLosslessPortsEnablePending are configured for lossless … |
| 1.3.6.1.4.1.2272.1.202.1.1.1.2 | TablercPrQosPolicyTable | not-accessible | current | A list of GPID entries. The number of entries is given by rcPrQosPolicyNumPolicies. |
| 1.3.6.1.4.1.2272.1.202.1.1.1.2.1 | RowrcPrQosPolicyEntry | not-accessible | current | Entry containing configuration information for a particular global policer. |
| 1.3.6.1.4.1.2272.1.202.1.1.1.2.1.1 | ColumnrcPrQosPolicyGpId | read-only | current | A value that uniquely identifies Global Policer associated with this entry. |
| 1.3.6.1.4.1.2272.1.202.1.1.1.2.1.2 | ColumnrcPrQosPolicyName | read-write | current | An administratively-assigned name for this Global Policer. |
| 1.3.6.1.4.1.2272.1.202.1.1.1.2.1.3 | ColumnrcPrQosPolicyPeakRate | read-write | current | Global Policer Peak Rate in Kilobit/sec. |
| 1.3.6.1.4.1.2272.1.202.1.1.1.2.1.4 | ColumnrcPrQosPolicySvcRate | read-write | current | Global Policer Service Rate in Kilobit/sec. |
| 1.3.6.1.4.1.2272.1.202.1.1.1.2.1.5 | ColumnrcPrQosPolicyLaneMembers | read-write | current | The set of lanes that are members of this Global Policer. The string is 4 octets long, for a total of 32 bits. Each bit corresponds to a laneId. Each I/O slot … |
| 1.3.6.1.4.1.2272.1.202.1.1.1.2.1.6 | ColumnrcPrQosPolicyRowStatus | read-write | current | Create/delete operations for this entry. |
| 1.3.6.1.4.1.2272.1.202.1.1.1.3 | TablercPrQosLocalPolicyTable | not-accessible | current | A list of policer entries. |
| 1.3.6.1.4.1.2272.1.202.1.1.1.3.1 | RowrcPrQosLocalPolicyEntry | not-accessible | current | An entry containing configuration information for a particular local policer. This field will return 0 for CB as tap.lane.lpid is not used. |
| 1.3.6.1.4.1.2272.1.202.1.1.1.3.1.1 | ColumnrcPrQosLocalPolicyGpId | read-only | current | A value of Global Policer ID corresponding to this local policer. |
| 1.3.6.1.4.1.2272.1.202.1.1.1.3.1.2 | ColumnrcPrQosLocalPolicyIndex | read-only | current | The slot number of the VSP chassis on which stats are collected. Valid slots are IO slots which are in slots 3 to 12. |
| 1.3.6.1.4.1.2272.1.202.1.1.1.3.1.3 | ColumnrcPrQosLocalPolicyPeakRate | read-only | current | Global Peak Rate in Kilobit/sec. |
| 1.3.6.1.4.1.2272.1.202.1.1.1.3.1.4 | ColumnrcPrQosLocalPolicySvcRate | read-only | current | Global Policer Service Rate in Kilobit/sec. |
| 1.3.6.1.4.1.2272.1.202.1.1.1.3.1.5 | ColumnrcPrQosLocalPolicyTotalPkts | read-only | current | Global Policer Total Packets Count. |
| 1.3.6.1.4.1.2272.1.202.1.1.1.3.1.6 | ColumnrcPrQosLocalPolicyTotalBytes | read-only | current | Global Policer Total Bytes Count. |
| 1.3.6.1.4.1.2272.1.202.1.1.1.3.1.7 | ColumnrcPrQosLocalPolicyBytesOverPeak | read-only | current | Global Policer Bytes over Peak Rate Count. |
| 1.3.6.1.4.1.2272.1.202.1.1.1.3.1.8 | ColumnrcPrQosLocalPolicyBytesOverSvc | read-only | current | Global Policer Bytes over Service Rate Count. |
| 1.3.6.1.4.1.2272.1.202.1.1.1.3.1.9 | ColumnrcPrQosLocalPolicyTotalPktsDropped | read-only | current | The count of Global Policer Total Packets dropped due to reasons other than policing, e.g. congestion. |
| 1.3.6.1.4.1.2272.1.202.1.1.1.3.1.10 | ColumnrcPrQosLocalPolicyLaneMember | read-only | current | The lane that this Gpid has a local policing account on |
| 1.3.6.1.4.1.2272.1.202.1.1.1.3.1.11 | ColumnrcPrQosLocalPolicyGreenPackets | read-only | current | The total number of packets received that were below committed rate. |
| 1.3.6.1.4.1.2272.1.202.1.1.1.3.1.12 | ColumnrcPrQosLocalPolicyGreenBytes | read-only | current | The total number of bytes received that were below the committed rate. |
| 1.3.6.1.4.1.2272.1.202.1.1.1.3.1.13 | ColumnrcPrQosLocalPolicyYellowPackets | read-only | current | The total number of packets received that were above the committed rate but below the peak rate. |
| 1.3.6.1.4.1.2272.1.202.1.1.1.3.1.14 | ColumnrcPrQosLocalPolicyYellowBytes | read-only | current | The total number of bytes received that were above the committed rate but below the peak rate. |
| 1.3.6.1.4.1.2272.1.202.1.1.1.3.1.15 | ColumnrcPrQosLocalPolicyRedPackets | read-only | current | The total number of packets received that were above the peak rate. |
| 1.3.6.1.4.1.2272.1.202.1.1.1.3.1.16 | ColumnrcPrQosLocalPolicyRedBytes | read-only | current | The total number of bytes received that were above the peak rate. |
| 1.3.6.1.4.1.2272.1.202.1.1.1.3.1.17 | ColumnrcPrQosLocalPolicyStatsClear | read-write | current | Clear Qos Policy statistics. |
| 1.3.6.1.4.1.2272.1.202.1.1.1.4 | TablercPrQosTxQueueTemplateTable | not-accessible | current | A list of egress queue templates. The number of templates is given by rcPrQosTxQueueNumTemplates. |
| 1.3.6.1.4.1.2272.1.202.1.1.1.4.1 | RowrcPrQosTxQueueTemplateEntry | not-accessible | current | Entry containing configuration information for a particular egress queue template. Queue is a set of egress queues. |
| 1.3.6.1.4.1.2272.1.202.1.1.1.4.1.1 | ColumnrcPrQosTxQueueTemplateId | read-only | current | A value that uniquely identifies Egress Queue Template. |
| 1.3.6.1.4.1.2272.1.202.1.1.1.4.1.2 | ColumnrcPrQosTxQueueTemplateName | read-write | current | An administratively-assigned name for this egress Queue Template. |
| 1.3.6.1.4.1.2272.1.202.1.1.1.4.1.3 | ColumnrcPrQosTxQueueTemplateMaxQueues | read-create | current | Maximum number of queues in this Template. |
| 1.3.6.1.4.1.2272.1.202.1.1.1.4.1.4 | ColumnrcPrQosTxQueueTemplateBalancedQueues | read-write | current | Total number of Balanced Queues in this Template. |
| 1.3.6.1.4.1.2272.1.202.1.1.1.4.1.5 | ColumnrcPrQosTxQueueTemplateHiPriQueues | read-write | current | Total number of High Priority Queues in this Template. |
| 1.3.6.1.4.1.2272.1.202.1.1.1.4.1.6 | ColumnrcPrQosTxQueueTemplateLoPriQueues | read-write | current | Total number of Low Priority Queues in this Template. |
| 1.3.6.1.4.1.2272.1.202.1.1.1.4.1.7 | ColumnrcPrQosTxQueueTemplateTotalQueues | read-only | current | Total number of queues in this Template. |
| 1.3.6.1.4.1.2272.1.202.1.1.1.4.1.8 | ColumnrcPrQosTxQueueTemplateBalancedQList | read-only | current | List of Balanced Queues in this Template. |
| 1.3.6.1.4.1.2272.1.202.1.1.1.4.1.9 | ColumnrcPrQosTxQueueTemplateHiPriQList | read-only | current | List of High Priority Queues in this Template. |
| 1.3.6.1.4.1.2272.1.202.1.1.1.4.1.10 | ColumnrcPrQosTxQueueTemplateLoPriQList | read-only | current | List of Low Priority Queues in this Template. |
| 1.3.6.1.4.1.2272.1.202.1.1.1.4.1.11 | ColumnrcPrQosTxQueueTemplateTotalQLists | read-only | current | List of Total Physical Queues in this Template. |
| 1.3.6.1.4.1.2272.1.202.1.1.1.4.1.12 | ColumnrcPrQosTxQueueTemplateMinRateTotal | read-only | current | Sum of minimum rate guarantees for this template. |
| 1.3.6.1.4.1.2272.1.202.1.1.1.4.1.13 | ColumnrcPrQosTxQueueTemplateMaxRateHiPri | read-only | current | Sum of maximum rate guarantees for high priority queues of this template. |
| 1.3.6.1.4.1.2272.1.202.1.1.1.4.1.14 | ColumnrcPrQosTxQueueTemplatePortMembers | read-write | current | Port members of this template. |
| 1.3.6.1.4.1.2272.1.202.1.1.1.4.1.15 | ColumnrcPrQosTxQueueTemplateFlags | read-write | current | Bitset indicated template state. |
| 1.3.6.1.4.1.2272.1.202.1.1.1.4.1.16 | ColumnrcPrQosTxQueueTemplateApply | read-write | current | When apply is issued by the administrator, the Egress Queue Set attributes are committed. |
| 1.3.6.1.4.1.2272.1.202.1.1.1.4.1.17 | ColumnrcPrQosTxQueueTemplateRowStatus | read-write | current | Create/delete operations for this entry. |
| 1.3.6.1.4.1.2272.1.202.1.1.1.5 | TablercPrQosTxQueueTable | not-accessible | current | A list of elementary Egress queue entries. |
| 1.3.6.1.4.1.2272.1.202.1.1.1.5.1 | RowrcPrQosTxQueueEntry | not-accessible | current | Entry containing configuration information for a particular elementary egress queue. |
| 1.3.6.1.4.1.2272.1.202.1.1.1.5.1.1 | ColumnrcPrQosTxQueueTid | read-write | current | Template ID of the template this queue belongs to. |
| 1.3.6.1.4.1.2272.1.202.1.1.1.5.1.2 | ColumnrcPrQosTxQueueQid | read-only | current | Queue Offset from the base queue for this port. |
| 1.3.6.1.4.1.2272.1.202.1.1.1.5.1.3 | ColumnrcPrQosTxQueueName | read-write | current | An NNSC name for this egress queue. Allowed only for 8 NNSC queues. |
| 1.3.6.1.4.1.2272.1.202.1.1.1.5.1.4 | ColumnrcPrQosTxQueueStyle | read-write | current | Egress queue style. |
| 1.3.6.1.4.1.2272.1.202.1.1.1.5.1.5 | ColumnrcPrQosTxQueueWeight | read-only | current | Egress queue weight. Applicable for balanced queues and lo-pri queues only. |
| 1.3.6.1.4.1.2272.1.202.1.1.1.5.1.6 | ColumnrcPrQosTxQueueMaxRate | read-write | current | Egress queue maximum rate, Kbs |
| 1.3.6.1.4.1.2272.1.202.1.1.1.5.1.7 | ColumnrcPrQosTxQueueMinRate | read-write | current | Egress queue minimun rate guarantee, Kbs. Applicable for balanced queues and lo-pri queues only. |
| 1.3.6.1.4.1.2272.1.202.1.1.1.5.1.8 | ColumnrcPrQosTxQueueBquantum | read-only | current | Bandwidth allocation unit. Applicable for balanced queues and lo-pri queues only. |
| 1.3.6.1.4.1.2272.1.202.1.1.1.5.1.9 | ColumnrcPrQosTxQueueMaxLength | read-write | current | Maximum queue length. |
| 1.3.6.1.4.1.2272.1.202.1.1.1.5.1.10 | ColumnrcPrQosTxQueueWredCurveSet | read-write | current | Random Early Detection Number. |
| 1.3.6.1.4.1.2272.1.202.1.1.1.5.1.11 | ColumnrcPrQosTxQueueRowStatus | read-write | current | Create/delete operations for this entry. |
| 1.3.6.1.4.1.2272.1.202.1.1.1.6 | TablercPrQosTxQueueStatsTable | not-accessible | current | A list of elementary Egress queue stats entries. |
| 1.3.6.1.4.1.2272.1.202.1.1.1.6.1 | RowrcPrQosTxQueueStatsEntry | not-accessible | current | Entry containing statistics information for a particular elementary egress queue. |
| 1.3.6.1.4.1.2272.1.202.1.1.1.6.1.1 | ColumnrcPrQosTxQueueStatsPort | read-only | current | Port index of the stats table. |
| 1.3.6.1.4.1.2272.1.202.1.1.1.6.1.2 | ColumnrcPrQosTxQueueStatsQid | read-only | current | Queue Offset from the base queue for this port. |
| 1.3.6.1.4.1.2272.1.202.1.1.1.6.1.3 | ColumnrcPrQosTxQueueStatsTotalPages | read-only | current | Total pages offered to the queue. |
| 1.3.6.1.4.1.2272.1.202.1.1.1.6.1.4 | ColumnrcPrQosTxQueueStatsDroppedPages | read-only | current | Total pages dropped by the queue. |
| 1.3.6.1.4.1.2272.1.202.1.1.1.6.1.5 | ColumnrcPrQosTxQueueStatsUtilization | read-only | current | Utilization percentage of the queue. |
| 1.3.6.1.4.1.2272.1.202.1.1.1.7 | TablercPrQosIngressExpToQosTable | not-accessible | current | This table is used to specify the Mpls EXP to QOS (Exp bit->QOS) mapping on packet ingress. |
| 1.3.6.1.4.1.2272.1.202.1.1.1.7.1 | RowrcPrQosIngressExpToQosEntry | not-accessible | current | Entry containing information of Exp bit->Qos mapping |
| 1.3.6.1.4.1.2272.1.202.1.1.1.7.1.1 | ColumnrcPrQosIngressExpToQosIndex | not-accessible | current | Used to uniquely identify a row in this table. |
| 1.3.6.1.4.1.2272.1.202.1.1.1.7.1.2 | ColumnrcPrQosIngressExpToQosMplsExp | read-only | current | The Mpls Exp bit level. |
| 1.3.6.1.4.1.2272.1.202.1.1.1.7.1.3 | ColumnrcPrQosIngressExpToQosLevel | read-write | current | qos level |
| 1.3.6.1.4.1.2272.1.202.1.1.1.7.1.4 | ColumnrcPrQosIngressExpToQosRowStatus | read-write | current | Create/delete operations for this entry. |
| 1.3.6.1.4.1.2272.1.202.1.1.1.8 | TablercPrQosEgressQosToExpTable | not-accessible | current | This table is used to specify the QOS to Mpls EXP bit field (QOS->Exp bit) mapping on packet egress. |
| 1.3.6.1.4.1.2272.1.202.1.1.1.8.1 | RowrcPrQosEgressQosToExpEntry | not-accessible | current | Entry containing information of Qos->Exp bit mapping |
| 1.3.6.1.4.1.2272.1.202.1.1.1.8.1.1 | ColumnrcPrQosEgressQosToExpIndex | not-accessible | current | Used to uniquely identify a row in this table. |
| 1.3.6.1.4.1.2272.1.202.1.1.1.8.1.2 | ColumnrcPrQosEgressQosToExpQosLevel | read-only | current | qos level |
| 1.3.6.1.4.1.2272.1.202.1.1.1.8.1.3 | ColumnrcPrQosEgressQosToExpMplsExp | read-write | current | The Mpls EXP bit level. |
| 1.3.6.1.4.1.2272.1.202.1.1.1.8.1.4 | ColumnrcPrQosEgressQosToExpRowStatus | read-write | current | Create/delete operations for this entry. |
| 1.3.6.1.4.1.2272.1.202.1.1.1.9 | TablercPrQosSubportQueueSetTemplateTable | not-accessible | current | A list of elementary egress queue templates. |
| 1.3.6.1.4.1.2272.1.202.1.1.1.9.1 | RowrcPrQosSubportQueueSetTemplateEntry | not-accessible | current | Entry containing configuration information for a particular egress queue template. Queue is a set of egress queues |
| 1.3.6.1.4.1.2272.1.202.1.1.1.9.1.1 | ColumnrcPrQosSubportQueueSetTemplatePortIndex | not-accessible | current | Port Index. |
| 1.3.6.1.4.1.2272.1.202.1.1.1.9.1.2 | ColumnrcPrQosSubportQueueSetTemplateIndex | not-accessible | current | A name assigned for this Subport Queue Set. |
| 1.3.6.1.4.1.2272.1.202.1.1.1.9.1.3 | ColumnrcPrQosSubportQueueSetTemplatePort | read-create | current | Port assigned for this Subport Queue Set. |
| 1.3.6.1.4.1.2272.1.202.1.1.1.9.1.4 | ColumnrcPrQosSubportQueueSetTemplateApply | read-create | current | When apply is issued by the administrators, the subport queue set attributes are committed. |
| 1.3.6.1.4.1.2272.1.202.1.1.1.9.1.5 | ColumnrcPrQosSubportQueueSetTemplateSubportProfileName | read-create | current | Name of the subport queue profile to be applied for this template. |
| 1.3.6.1.4.1.2272.1.202.1.1.1.9.1.6 | ColumnrcPrQosSubportQueueSetTemplateAssignment | read-only | current | Name of the trunk to this queue set is assigned. |
| 1.3.6.1.4.1.2272.1.202.1.1.1.9.1.7 | ColumnrcPrQosSubportQueueSetTemplateRowStatus | read-create | current | Create/delete operations for this entry. |
| 1.3.6.1.4.1.2272.1.202.1.1.1.9.1.8 | ColumnrcPrQosSubportQueueSetTemplateMinRate | read-create | current | Minimum Rate. Minimum Rate of less than 10000 is valid only on 48 Port RC Modules. On all other modules the minimum value Min Rate can be configured is 10000. |
| 1.3.6.1.4.1.2272.1.202.1.1.1.9.1.9 | ColumnrcPrQosSubportQueueSetTemplateMaxRate | read-create | current | Maximum Rate. Maximum Rate of less than 10000 is valid only on 48 Port RC Modules. On all other modules the minimum value Max Rate can be configured is 10000. |
| 1.3.6.1.4.1.2272.1.202.1.1.1.9.1.10 | ColumnrcPrQosSubportQueueSetTemplateMaxRateState | read-create | current | Enable/Disable the maximum rate. |
| 1.3.6.1.4.1.2272.1.202.1.1.1.9.1.11 | ColumnrcPrQosSubportQueueSetTemplateStatus | read-only | current | Bitset indicating Subport Queue Set status. |
| 1.3.6.1.4.1.2272.1.202.1.1.1.10 | TablercPrQosIsidRateLimitsTable | not-accessible | current | Isid Rate Limits Tables are for R-Module cards only |
| 1.3.6.1.4.1.2272.1.202.1.1.1.10.1 | RowrcPrQosIsidRateLimitsEntry | not-accessible | current | Isid Rate Limits Table |
| 1.3.6.1.4.1.2272.1.202.1.1.1.10.1.1 | ColumnrcPrQosIsidRateLimitsSlotNumber | not-accessible | current | Slot number. |
| 1.3.6.1.4.1.2272.1.202.1.1.1.10.1.2 | ColumnrcPrQosIsidRateLimitsLaneNumber | not-accessible | current | Lane number. On a 30 Port 1G card (8630GBR), Ports 1 to 10 are grouped under Lane 1, Ports 11 to 20 are grouped under Lane 2 and Ports 21 to 30 are grouped und… |
| 1.3.6.1.4.1.2272.1.202.1.1.1.10.1.3 | ColumnrcPrQosIsidRateLimitsAdminState | read-write | current | Admin control for the Rate Limiter Table. |
| 1.3.6.1.4.1.2272.1.202.1.1.1.11 | TablercPrQosIsidRateLimitsIsidTable | not-accessible | current | Table contain rate limit for all Power Range card (R module). Based on Slot and lane number and Isid ID |
| 1.3.6.1.4.1.2272.1.202.1.1.1.11.1 | RowrcPrQosIsidRateLimitsIsidEntry | not-accessible | current | Entry of Rate limit per slot and lane and Isid ID |
| 1.3.6.1.4.1.2272.1.202.1.1.1.11.1.1 | ColumnrcPrQosIsidRateLimitsIsidSlotNumber | not-accessible | current | Slot number. |
| 1.3.6.1.4.1.2272.1.202.1.1.1.11.1.2 | ColumnrcPrQosIsidRateLimitsIsidLaneNumber | not-accessible | current | Lane number. On a 30 Port 1G card (8630GBR), Ports 1 to 10 are grouped under Lane 1, Ports 11 to 20 are grouped under Lane 2 and Ports 21 to 30 are grouped und… |
| 1.3.6.1.4.1.2272.1.202.1.1.1.11.1.3 | ColumnrcPrQosIsidRateLimitsIsidIsidId | not-accessible | current | Isid Id. |
| 1.3.6.1.4.1.2272.1.202.1.1.1.11.1.4 | ColumnrcPrQosIsidRateLimitsIsidRateLimit | read-only | current | Rate Limit in Mbps. |
| 1.3.6.1.4.1.2272.1.202.1.1.1.12 | TablercPrQosSubportProfileTable | not-accessible | current | Table contain Subport Queue Profile information |
| 1.3.6.1.4.1.2272.1.202.1.1.1.12.1 | RowrcPrQosSubportProfileEntry | not-accessible | current | Subport Queue Profile Table entry |
| 1.3.6.1.4.1.2272.1.202.1.1.1.12.1.1 | ColumnrcPrQosSubportProfileIndex | not-accessible | current | A value that uniquely identifies the Subport Queue Profile. |
| 1.3.6.1.4.1.2272.1.202.1.1.1.12.1.2 | ColumnrcPrQosSubportProfileName | read-create | current | Subport Queue Profile table name to be used. |
| 1.3.6.1.4.1.2272.1.202.1.1.1.12.1.3 | ColumnrcPrQosSubportProfileBalancedQueues | read-create | current | Total number of Balanced Queues in this profile. |
| 1.3.6.1.4.1.2272.1.202.1.1.1.12.1.4 | ColumnrcPrQosSubportProfileHighPriQueues | read-create | current | Total number of High Priority Queues in this profile. |
| 1.3.6.1.4.1.2272.1.202.1.1.1.12.1.5 | ColumnrcPrQosSubportProfileLowPriQueues | read-create | current | Total number of Low Priority Queues in this profile. |
| 1.3.6.1.4.1.2272.1.202.1.1.1.12.1.6 | ColumnrcPrQosSubportProfileBalancedQList | read-only | current | List of Balanced Queues in this profile. |
| 1.3.6.1.4.1.2272.1.202.1.1.1.12.1.7 | ColumnrcPrQosSubportProfileHighPriQList | read-only | current | List of High Priority Queues in this profile. |
| 1.3.6.1.4.1.2272.1.202.1.1.1.12.1.8 | ColumnrcPrQosSubportProfileLowPriQList | read-only | current | List of Low Priority Queues in this profile. |
| 1.3.6.1.4.1.2272.1.202.1.1.1.12.1.9 | ColumnrcPrQosSubportProfileRowStatus | read-create | current | Create/delete operations for this entry. |
| 1.3.6.1.4.1.2272.1.202.1.1.1.13 | TablercPrQosSubportProfileQueueTable | not-accessible | current | A list of elementary subport queue entries. |
| 1.3.6.1.4.1.2272.1.202.1.1.1.13.1 | RowrcPrQosSubportProfileQueueEntry | not-accessible | current | Entry containing configuration information for a particular subport egress queue. |
| 1.3.6.1.4.1.2272.1.202.1.1.1.13.1.1 | ColumnrcPrQosSubportProfileQueueProfileIndex | not-accessible | current | Profile index of the profie this queue belongs to. |
| 1.3.6.1.4.1.2272.1.202.1.1.1.13.1.2 | ColumnrcPrQosSubportProfileQueueQIndex | not-accessible | current | Queue offset from the base queue. |
| 1.3.6.1.4.1.2272.1.202.1.1.1.13.1.3 | ColumnrcPrQosSubportProfileQueueQStyle | read-only | current | Queue style. |
| 1.3.6.1.4.1.2272.1.202.1.1.1.13.1.4 | ColumnrcPrQosSubportProfileQueueMaxRate | read-write | current | Queue maximum rate in percentage. |
| 1.3.6.1.4.1.2272.1.202.1.1.1.13.1.5 | ColumnrcPrQosSubportProfileQueueMinRate | read-write | current | Queue minimum rate in percentage. |
| 1.3.6.1.4.1.2272.1.202.1.1.1.13.1.6 | ColumnrcPrQosSubportProfileQueueMaxLength | read-write | current | Maximum queue length. |
| 1.3.6.1.4.1.2272.1.202.1.1.1.13.1.7 | ColumnrcPrQosSubportProfileQueueWredCurveSet | read-write | current | Weighted Random Early Detection setting. |
| 1.3.6.1.4.1.2272.1.202.1.1.1.13.1.8 | ColumnrcPrQosSubportProfileQueueQPriority | read-only | current | Q Priority. |
| 1.3.6.1.4.1.2272.1.202.1.1.1.14 | TablercPrQosSubportQueueSetEqmapTable | not-accessible | current | Internal QoS to Egress Queue mapping table. |
| 1.3.6.1.4.1.2272.1.202.1.1.1.14.1 | RowrcPrQosSubportQueueSetEqmapEntry | not-accessible | current | Entry containing egress queue id for an internal QoS level on a subport q set. |
| 1.3.6.1.4.1.2272.1.202.1.1.1.14.1.1 | ColumnrcPrQosSubportQueueSetEqmapPortIndex | not-accessible | current | Port Index. |
| 1.3.6.1.4.1.2272.1.202.1.1.1.14.1.2 | ColumnrcPrQosSubportQueueSetEqmapIndex | not-accessible | current | Subport Queue Set Index. |
| 1.3.6.1.4.1.2272.1.202.1.1.1.14.1.3 | ColumnrcPrQosSubportQueueSetEqmapInternalQos | not-accessible | current | Internal QoS. |
| 1.3.6.1.4.1.2272.1.202.1.1.1.14.1.4 | ColumnrcPrQosSubportQueueSetEqmapPort | read-only | current | Port assigned for this Subport Queue Set. |
| 1.3.6.1.4.1.2272.1.202.1.1.1.14.1.5 | ColumnrcPrQosSubportQueueSetEqmapEgressQueue | read-only | current | Egress Queue Id assigned for the specified Internal QoS Lvl. |
| 1.3.6.1.4.1.2272.1.202.1.1.1.15 | TablercPrQosCosQuePortStatsTable | not-accessible | current | This table is used to get the qos cos queue port stats. |
| 1.3.6.1.4.1.2272.1.202.1.1.1.15.1 | RowrcPrQosCosQuePortStatsEntry | not-accessible | current | Entry containing information of port Qos cosq stats |
| 1.3.6.1.4.1.2272.1.202.1.1.1.15.1.1 | ColumnrcPrQosCosQuePortStatsIndex | not-accessible | current | Used to indicate the loopback port number from 192(1/1) to 297(2/42). |
| 1.3.6.1.4.1.2272.1.202.1.1.1.15.1.2 | ColumnrcPrQosCosQuePortStatsQue0OutPackets | read-only | current | the out packets for Cos queue 0. |
| 1.3.6.1.4.1.2272.1.202.1.1.1.15.1.3 | ColumnrcPrQosCosQuePortStatsQue0OutBytes | read-only | current | the out bytes for Cos queue 0. |
| 1.3.6.1.4.1.2272.1.202.1.1.1.15.1.4 | ColumnrcPrQosCosQuePortStatsQue0DropPackets | read-only | current | the drop packets for Cos queue 0. |
| 1.3.6.1.4.1.2272.1.202.1.1.1.15.1.5 | ColumnrcPrQosCosQuePortStatsQue0DropBytes | read-only | current | the drop bytes for Cos queue 0. |
| 1.3.6.1.4.1.2272.1.202.1.1.1.15.1.6 | ColumnrcPrQosCosQuePortStatsQue1OutPackets | read-only | current | the out packets for Cos queue 1. |
| 1.3.6.1.4.1.2272.1.202.1.1.1.15.1.7 | ColumnrcPrQosCosQuePortStatsQue1OutBytes | read-only | current | the out bytes for Cos queue 1. |
| 1.3.6.1.4.1.2272.1.202.1.1.1.15.1.8 | ColumnrcPrQosCosQuePortStatsQue1DropPackets | read-only | current | the drop packets for Cos queue 1. |
| 1.3.6.1.4.1.2272.1.202.1.1.1.15.1.9 | ColumnrcPrQosCosQuePortStatsQue1DropBytes | read-only | current | the drop bytes for Cos queue 1. |
| 1.3.6.1.4.1.2272.1.202.1.1.1.15.1.10 | ColumnrcPrQosCosQuePortStatsQue2OutPackets | read-only | current | the out packets for Cos queue 2. |
| 1.3.6.1.4.1.2272.1.202.1.1.1.15.1.11 | ColumnrcPrQosCosQuePortStatsQue2OutBytes | read-only | current | the out bytes for Cos queue 2. |
| 1.3.6.1.4.1.2272.1.202.1.1.1.15.1.12 | ColumnrcPrQosCosQuePortStatsQue2DropPackets | read-only | current | the drop packets for Cos queue 2. |
| 1.3.6.1.4.1.2272.1.202.1.1.1.15.1.13 | ColumnrcPrQosCosQuePortStatsQue2DropBytes | read-only | current | the drop bytes for Cos queue 2. |
| 1.3.6.1.4.1.2272.1.202.1.1.1.15.1.14 | ColumnrcPrQosCosQuePortStatsQue3OutPackets | read-only | current | the out packets for Cos queue 3. |
| 1.3.6.1.4.1.2272.1.202.1.1.1.15.1.15 | ColumnrcPrQosCosQuePortStatsQue3OutBytes | read-only | current | the out bytes for Cos queue 3. |
| 1.3.6.1.4.1.2272.1.202.1.1.1.15.1.16 | ColumnrcPrQosCosQuePortStatsQue3DropPackets | read-only | current | the drop packets for Cos queue 3. |
| 1.3.6.1.4.1.2272.1.202.1.1.1.15.1.17 | ColumnrcPrQosCosQuePortStatsQue3DropBytes | read-only | current | the drop bytes for Cos queue 3. |
| 1.3.6.1.4.1.2272.1.202.1.1.1.15.1.18 | ColumnrcPrQosCosQuePortStatsQue4OutPackets | read-only | current | the out packets for Cos queue 4. |
| 1.3.6.1.4.1.2272.1.202.1.1.1.15.1.19 | ColumnrcPrQosCosQuePortStatsQue4OutBytes | read-only | current | the out bytes for Cos queue 4. |
| 1.3.6.1.4.1.2272.1.202.1.1.1.15.1.20 | ColumnrcPrQosCosQuePortStatsQue4DropPackets | read-only | current | the drop packets for Cos queue 4. |
| 1.3.6.1.4.1.2272.1.202.1.1.1.15.1.21 | ColumnrcPrQosCosQuePortStatsQue4DropBytes | read-only | current | the drop bytes for Cos queue 4. |
| 1.3.6.1.4.1.2272.1.202.1.1.1.15.1.22 | ColumnrcPrQosCosQuePortStatsQue5OutPackets | read-only | current | the out packets for Cos queue 5. |
| 1.3.6.1.4.1.2272.1.202.1.1.1.15.1.23 | ColumnrcPrQosCosQuePortStatsQue5OutBytes | read-only | current | the out bytes for Cos queue 5. |
| 1.3.6.1.4.1.2272.1.202.1.1.1.15.1.24 | ColumnrcPrQosCosQuePortStatsQue5DropPackets | read-only | current | the drop packets for Cos queue 5. |
| 1.3.6.1.4.1.2272.1.202.1.1.1.15.1.25 | ColumnrcPrQosCosQuePortStatsQue5DropBytes | read-only | current | the drop bytes for Cos queue 5. |
| 1.3.6.1.4.1.2272.1.202.1.1.1.15.1.26 | ColumnrcPrQosCosQuePortStatsQue6OutPackets | read-only | current | the out packets for Cos queue 6. |
| 1.3.6.1.4.1.2272.1.202.1.1.1.15.1.27 | ColumnrcPrQosCosQuePortStatsQue6OutBytes | read-only | current | the out bytes for Cos queue 6. |
| 1.3.6.1.4.1.2272.1.202.1.1.1.15.1.28 | ColumnrcPrQosCosQuePortStatsQue6DropPackets | read-only | current | the drop packets for Cos queue 6. |
| 1.3.6.1.4.1.2272.1.202.1.1.1.15.1.29 | ColumnrcPrQosCosQuePortStatsQue6DropBytes | read-only | current | the drop bytes for Cos queue 6. |
| 1.3.6.1.4.1.2272.1.202.1.1.1.15.1.30 | ColumnrcPrQosCosQuePortStatsQue7OutPackets | read-only | current | the out packets for Cos queue 7. |
| 1.3.6.1.4.1.2272.1.202.1.1.1.15.1.31 | ColumnrcPrQosCosQuePortStatsQue7OutBytes | read-only | current | the out bytes for Cos queue 7. |
| 1.3.6.1.4.1.2272.1.202.1.1.1.15.1.32 | ColumnrcPrQosCosQuePortStatsQue7DropPackets | read-only | current | the drop packets for Cos queue 7. |
| 1.3.6.1.4.1.2272.1.202.1.1.1.15.1.33 | ColumnrcPrQosCosQuePortStatsQue7DropBytes | read-only | current | the drop bytes for Cos queue 7. |
| 1.3.6.1.4.1.2272.1.202.1.1.1.15.1.34 | ColumnrcPrQosCosQuePortStatsClearStat | read-write | current | Clear Stats. |
| 1.3.6.1.4.1.2272.1.202.1.1.1.16 | TablercPrQosCosQueLoopbackPortStatsTable | not-accessible | current | This table is used to get the qos cos queue port stats. |
| 1.3.6.1.4.1.2272.1.202.1.1.1.16.1 | RowrcPrQosCosQueLoopbackPortStatsEntry | not-accessible | current | Entry containing information of port Qos cosq stats |
| 1.3.6.1.4.1.2272.1.202.1.1.1.16.1.1 | ColumnrcPrQosCosQueLoopbackPortStatsIndex | not-accessible | current | Used to indicate the port number from 1 to 2. |
| 1.3.6.1.4.1.2272.1.202.1.1.1.16.1.2 | ColumnrcPrQosCosQueLoopbackPortStatsQue0OutPackets | read-only | current | the out packets for Cos queue 0. |
| 1.3.6.1.4.1.2272.1.202.1.1.1.16.1.3 | ColumnrcPrQosCosQueLoopbackPortStatsQue0OutBytes | read-only | current | the out bytes for Cos queue 0. |
| 1.3.6.1.4.1.2272.1.202.1.1.1.16.1.4 | ColumnrcPrQosCosQueLoopbackPortStatsQue0DropPackets | read-only | current | the drop packets for Cos queue 0. |
| 1.3.6.1.4.1.2272.1.202.1.1.1.16.1.5 | ColumnrcPrQosCosQueLoopbackPortStatsQue0DropBytes | read-only | current | the drop bytes for Cos queue 0. |
| 1.3.6.1.4.1.2272.1.202.1.1.1.16.1.6 | ColumnrcPrQosCosQueLoopbackPortStatsQue1OutPackets | read-only | current | the out packets for Cos queue 1. |
| 1.3.6.1.4.1.2272.1.202.1.1.1.16.1.7 | ColumnrcPrQosCosQueLoopbackPortStatsQue1OutBytes | read-only | current | the out bytes for Cos queue 1. |
| 1.3.6.1.4.1.2272.1.202.1.1.1.16.1.8 | ColumnrcPrQosCosQueLoopbackPortStatsQue1DropPackets | read-only | current | the drop packets for Cos queue 1. |
| 1.3.6.1.4.1.2272.1.202.1.1.1.16.1.9 | ColumnrcPrQosCosQueLoopbackPortStatsQue1DropBytes | read-only | current | the drop bytes for Cos queue 1. |
| 1.3.6.1.4.1.2272.1.202.1.1.1.16.1.10 | ColumnrcPrQosCosQueLoopbackPortStatsQue2OutPackets | read-only | current | the out packets for Cos queue 2. |
| 1.3.6.1.4.1.2272.1.202.1.1.1.16.1.11 | ColumnrcPrQosCosQueLoopbackPortStatsQue2OutBytes | read-only | current | the out bytes for Cos queue 2. |
| 1.3.6.1.4.1.2272.1.202.1.1.1.16.1.12 | ColumnrcPrQosCosQueLoopbackPortStatsQue2DropPackets | read-only | current | the drop packets for Cos queue 2. |
| 1.3.6.1.4.1.2272.1.202.1.1.1.16.1.13 | ColumnrcPrQosCosQueLoopbackPortStatsQue2DropBytes | read-only | current | the drop bytes for Cos queue 2. |
| 1.3.6.1.4.1.2272.1.202.1.1.1.16.1.14 | ColumnrcPrQosCosQueLoopbackPortStatsQue3OutPackets | read-only | current | the out packets for Cos queue 3. |
| 1.3.6.1.4.1.2272.1.202.1.1.1.16.1.15 | ColumnrcPrQosCosQueLoopbackPortStatsQue3OutBytes | read-only | current | the out bytes for Cos queue 3. |
| 1.3.6.1.4.1.2272.1.202.1.1.1.16.1.16 | ColumnrcPrQosCosQueLoopbackPortStatsQue3DropPackets | read-only | current | the drop packets for Cos queue 3. |
| 1.3.6.1.4.1.2272.1.202.1.1.1.16.1.17 | ColumnrcPrQosCosQueLoopbackPortStatsQue3DropBytes | read-only | current | the drop bytes for Cos queue 3. |
| 1.3.6.1.4.1.2272.1.202.1.1.1.16.1.18 | ColumnrcPrQosCosQueLoopbackPortStatsQue4OutPackets | read-only | current | the out packets for Cos queue 4. |
| 1.3.6.1.4.1.2272.1.202.1.1.1.16.1.19 | ColumnrcPrQosCosQueLoopbackPortStatsQue4OutBytes | read-only | current | the out bytes for Cos queue 4. |
| 1.3.6.1.4.1.2272.1.202.1.1.1.16.1.20 | ColumnrcPrQosCosQueLoopbackPortStatsQue4DropPackets | read-only | current | the drop packets for Cos queue 4. |
| 1.3.6.1.4.1.2272.1.202.1.1.1.16.1.21 | ColumnrcPrQosCosQueLoopbackPortStatsQue4DropBytes | read-only | current | the drop bytes for Cos queue 4. |
| 1.3.6.1.4.1.2272.1.202.1.1.1.16.1.22 | ColumnrcPrQosCosQueLoopbackPortStatsQue5OutPackets | read-only | current | the out packets for Cos queue 5. |
| 1.3.6.1.4.1.2272.1.202.1.1.1.16.1.23 | ColumnrcPrQosCosQueLoopbackPortStatsQue5OutBytes | read-only | current | the out bytes for Cos queue 5. |
| 1.3.6.1.4.1.2272.1.202.1.1.1.16.1.24 | ColumnrcPrQosCosQueLoopbackPortStatsQue5DropPackets | read-only | current | the drop packets for Cos queue 5. |
| 1.3.6.1.4.1.2272.1.202.1.1.1.16.1.25 | ColumnrcPrQosCosQueLoopbackPortStatsQue5DropBytes | read-only | current | the drop bytes for Cos queue 5. |
| 1.3.6.1.4.1.2272.1.202.1.1.1.16.1.26 | ColumnrcPrQosCosQueLoopbackPortStatsQue6OutPackets | read-only | current | the out packets for Cos queue 6. |
| 1.3.6.1.4.1.2272.1.202.1.1.1.16.1.27 | ColumnrcPrQosCosQueLoopbackPortStatsQue6OutBytes | read-only | current | the out bytes for Cos queue 6. |
| 1.3.6.1.4.1.2272.1.202.1.1.1.16.1.28 | ColumnrcPrQosCosQueLoopbackPortStatsQue6DropPackets | read-only | current | the drop packets for Cos queue 6. |
| 1.3.6.1.4.1.2272.1.202.1.1.1.16.1.29 | ColumnrcPrQosCosQueLoopbackPortStatsQue6DropBytes | read-only | current | the drop bytes for Cos queue 6. |
| 1.3.6.1.4.1.2272.1.202.1.1.1.16.1.30 | ColumnrcPrQosCosQueLoopbackPortStatsQue7OutPackets | read-only | current | the out packets for Cos queue 7. |
| 1.3.6.1.4.1.2272.1.202.1.1.1.16.1.31 | ColumnrcPrQosCosQueLoopbackPortStatsQue7OutBytes | read-only | current | the out bytes for Cos queue 7. |
| 1.3.6.1.4.1.2272.1.202.1.1.1.16.1.32 | ColumnrcPrQosCosQueLoopbackPortStatsQue7DropPackets | read-only | current | the drop packets for Cos queue 7. |
| 1.3.6.1.4.1.2272.1.202.1.1.1.16.1.33 | ColumnrcPrQosCosQueLoopbackPortStatsQue7DropBytes | read-only | current | the drop bytes for Cos queue 7. |
| 1.3.6.1.4.1.2272.1.202.1.1.1.16.1.34 | ColumnrcPrQosCosQueLoopbackPortStatsClearStat | read-write | current | Clear stats. |
| 1.3.6.1.4.1.2272.1.202.1.1.1.17 | TablercPrQosCosQueCppPortStatsTable | not-accessible | current | This table is used to get the qos cos queue port stats. |
| 1.3.6.1.4.1.2272.1.202.1.1.1.17.1 | RowrcPrQosCosQueCppPortStatsEntry | not-accessible | current | Entry containing information of port Qos cosq stats |
| 1.3.6.1.4.1.2272.1.202.1.1.1.17.1.1 | ColumnrcPrQosCosQueCppPortStatsIndex | not-accessible | current | Used to indicate the cos queue number from 0 to 15. |
| 1.3.6.1.4.1.2272.1.202.1.1.1.17.1.2 | ColumnrcPrQosCosQueCppPortStatsOutPackets | read-only | current | the out packets for cpp port. |
| 1.3.6.1.4.1.2272.1.202.1.1.1.17.1.3 | ColumnrcPrQosCosQueCppPortStatsOutBytes | read-only | current | the out bytes for cpp port. |
| 1.3.6.1.4.1.2272.1.202.1.1.1.17.1.4 | ColumnrcPrQosCosQueCppPortStatsDropPackets | read-only | current | the drop packets for cpp port. |
| 1.3.6.1.4.1.2272.1.202.1.1.1.17.1.5 | ColumnrcPrQosCosQueCppPortStatsDropBytes | read-only | current | the drop bytes for cpp port. |
| 1.3.6.1.4.1.2272.1.202.1.1.1.18 | NodercPrQosCosQue | |||
| 1.3.6.1.4.1.2272.1.202.1.1.1.18.1 | ScalarrcPrQosCosQueCpuStatsClear | read-write | current | Clear cpu qos cos queue statistics. |
| 1.3.6.1.4.1.2272.1.202.1.1.2 | NodercPrFilter | |||
| 1.3.6.1.4.1.2272.1.202.1.1.2.1 | NodercPrFilterScalars | |||
| 1.3.6.1.4.1.2272.1.202.1.1.2.1.1 | ScalarrcPrFilterActTableSize | read-only | current | Used to indicate the number of Act entries in the rcPrFilterActTable. Default table size is 0 until the administrator configures any Act entries. |
| 1.3.6.1.4.1.2272.1.202.1.1.2.1.2 | ScalarrcPrFilterAclTableSize | read-only | current | Used to indicate the number of Acl entries in the rcPrFilterAclTable. Default table size is 0 until the administrator configures any Acl entries. |
| 1.3.6.1.4.1.2272.1.202.1.1.2.1.3 | ScalarrcPrFilterAceTableSize | read-only | current | Used to indicate the number of Ace entries in the rcPrFilterAceTable. Default table size is 0 until the administrator configures any Ace entries. The maximum s… |
| 1.3.6.1.4.1.2272.1.202.1.1.2.1.4 | ScalarrcPrFilterAclBufferWrap | read-write | current | Used to enable or disable buffer wrapping for filters log. |
| 1.3.6.1.4.1.2272.1.202.1.1.2.1.5 | ScalarrcPrFilterAclClearLog | read-write | current | Used to clear the filter Logs collected. |
| 1.3.6.1.4.1.2272.1.202.1.1.2.2 | NodercPrFilterAct | |||
| 1.3.6.1.4.1.2272.1.202.1.1.2.2.1 | TablercPrFilterActTable | not-accessible | current | A table of Acts to store information of each Act entry. This table is indexed by the Act Id. |
| 1.3.6.1.4.1.2272.1.202.1.1.2.2.1.1 | RowrcPrFilterActEntry | not-accessible | current | One Act Entry holding Act information. |
| 1.3.6.1.4.1.2272.1.202.1.1.2.2.1.1.1 | ColumnrcPrFilterActId | read-only | current | A table of Acts to store information of each Act. This table is indexed by the Act Id. |
| 1.3.6.1.4.1.2272.1.202.1.1.2.2.1.1.2 | ColumnrcPrFilterActName | read-write | current | A descriptive name chosen by the administrator for the Act Entry. |
| 1.3.6.1.4.1.2272.1.202.1.1.2.2.1.1.3 | ColumnrcPrFilterActArpAttrs | read-write | current | Value is one or multiple (logical 'OR' of the following): none(0), operation(1) none: No Arp Attrs are selected or to clear other choices. operation: Only vali… |
| 1.3.6.1.4.1.2272.1.202.1.1.2.2.1.1.4 | ColumnrcPrFilterActEthernetAttrs | read-write | current | Value is one or multiple of the following: none(0), srcMac(1), dstMac(2), etherType(4), port(8), vlan(16), vlanTagPrio(32) none: If selected then unselect all … |
| 1.3.6.1.4.1.2272.1.202.1.1.2.2.1.1.5 | ColumnrcPrFilterActIpAttrs | read-write | current | Value is one or multiple of the following: none(0), srcIp(1), dstIp(2), ipFragFlag(4), ipOptions(8), ipProtoType(16), dscp(32) none: If selected then unselect … |
| 1.3.6.1.4.1.2272.1.202.1.1.2.2.1.1.6 | ColumnrcPrFilterActProtocolAttrs | read-write | current | Value is one or multiple of the following: none(0), tcpSrcPort(1), udpSrcPort(2), tcpDstPort(4), udpDstPort(8), tcpFlags(16), icmpMsgType(32), icmpv6MsgType(64… |
| 1.3.6.1.4.1.2272.1.202.1.1.2.2.1.1.7 | ColumnrcPrFilterActApply | read-write | current | When apply is issued by the administrator, the ACT attributes cannot be modified. |
| 1.3.6.1.4.1.2272.1.202.1.1.2.2.1.1.8 | ColumnrcPrFilterActRowStatus | read-write | current | Create/delete operations for this entry. The entry cannot be modified or deleted while there are Acls configured with this Act entry. |
| 1.3.6.1.4.1.2272.1.202.1.1.2.2.1.1.9 | ColumnrcPrFilterActIpv6Attrs | read-write | current | Value is one or multiple of the following: none(0), srcIpv6(1), dstIpv6(4), nextHdr(16), none: If selected then unselect all other selections. |
| 1.3.6.1.4.1.2272.1.202.1.1.2.2.2 | TablercPrFilterActPatternTable | not-accessible | current | A table of user-defined parameters of Acls to store information of each Acl. This table is indexed by the Act Id and PatternIndex. |
| 1.3.6.1.4.1.2272.1.202.1.1.2.2.2.1 | RowrcPrFilterActPatternEntry | not-accessible | current | Entry containing Configuration information for a particular Act. |
| 1.3.6.1.4.1.2272.1.202.1.1.2.2.2.1.1 | ColumnrcPrFilterActPatternActId | read-only | current | An index to the ActPatternEntry, a unique identifier for Act entry in the range of Table Size. |
| 1.3.6.1.4.1.2272.1.202.1.1.2.2.2.1.2 | ColumnrcPrFilterActPatternIndex | read-only | current | Indexes each user defined field pattern in an Acl entry. In this release only 3 patterns are allowed per ACT but we can have multiple patterns per ACL. |
| 1.3.6.1.4.1.2272.1.202.1.1.2.2.2.1.3 | ColumnrcPrFilterActPatternName | read-write | current | A descriptive name chosen by the administrator for the Acl Pattern Entry. |
| 1.3.6.1.4.1.2272.1.202.1.1.2.2.2.1.4 | ColumnrcPrFilterActPatternBase | read-write | current | User defined fields from headers to be used in the Aces of the Acl. |
| 1.3.6.1.4.1.2272.1.202.1.1.2.2.2.1.5 | ColumnrcPrFilterActPatternOffset | read-write | current | Set Offset in bytes to the beginning offset of the user defined field with selected header option as base. |
| 1.3.6.1.4.1.2272.1.202.1.1.2.2.2.1.6 | ColumnrcPrFilterActPatternLength | read-write | current | The number of bytes to extract beginning from the offset is set in rcPrFilterActPatternLength. Only 1-15 are valid. |
| 1.3.6.1.4.1.2272.1.202.1.1.2.2.2.1.7 | ColumnrcPrFilterActPatternRowStatus | read-write | current | Create/delete operations for this entry. |
| 1.3.6.1.4.1.2272.1.202.1.1.2.3 | NodercPrFilterAcl | |||
| 1.3.6.1.4.1.2272.1.202.1.1.2.3.1 | TablercPrFilterAclTable | not-accessible | current | A table of Acls to store information of each Acl. This table is indexed by the Acl Id. |
| 1.3.6.1.4.1.2272.1.202.1.1.2.3.1.1 | RowrcPrFilterAclEntry | not-accessible | current | Entry containing Configuration information for a particular Acl. |
| 1.3.6.1.4.1.2272.1.202.1.1.2.3.1.1.1 | ColumnrcPrFilterAclId | read-only | current | A unique identifier for Acl entry in the range of Table Size. |
| 1.3.6.1.4.1.2272.1.202.1.1.2.3.1.1.2 | ColumnrcPrFilterAclActId | read-write | current | A unique identifier for Act entry in the range of Table Size. |
| 1.3.6.1.4.1.2272.1.202.1.1.2.3.1.1.3 | ColumnrcPrFilterAclName | read-write | current | A descriptive name chosen by the administrator for the Acl Entry. |
| 1.3.6.1.4.1.2272.1.202.1.1.2.3.1.1.4 | ColumnrcPrFilterAclType | read-write | current | An Acl can be vlan-based or port-based. An Ace has a capability to match packets classified as 'ingress' and 'egress'. An ingress packet is assigned a value 'i… |
| 1.3.6.1.4.1.2272.1.202.1.1.2.3.1.1.5 | ColumnrcPrFilterAclAceListSize | read-only | current | Indicates the number of Aces in a particular Acl. |
| 1.3.6.1.4.1.2272.1.202.1.1.2.3.1.1.6 | ColumnrcPrFilterAclDefaultAction | read-write | current | Indicates action to be taken when none of the Aces in the Acl match. |
| 1.3.6.1.4.1.2272.1.202.1.1.2.3.1.1.7 | ColumnrcPrFilterAclGlobalAction | read-write | current | Indicates action is applied to all Aces that match in an Acl. |
| 1.3.6.1.4.1.2272.1.202.1.1.2.3.1.1.8 | ColumnrcPrFilterAclState | read-write | current | Enables/Disables the state of all Aces in the Acl |
| 1.3.6.1.4.1.2272.1.202.1.1.2.3.1.1.9 | ColumnrcPrFilterAclVlanList | read-write | current | An array used to indicate all the VLANs to be associated with this Acl Entry. At present, only 4k Vlans are supported. |
| 1.3.6.1.4.1.2272.1.202.1.1.2.3.1.1.10 | ColumnrcPrFilterAclPortList | read-write | current | Indicates the ports to be added to this Acl Entry. |
| 1.3.6.1.4.1.2272.1.202.1.1.2.3.1.1.11 | ColumnrcPrFilterAclRowStatus | read-write | current | Create/delete operations for the entry. Deleting a non-empty Acl results in deletion of member Aces and then the Acl. |
| 1.3.6.1.4.1.2272.1.202.1.1.2.3.1.1.12 | ColumnrcPrFilterAclNumVlanIds | read-only | current | Used to Indicate the number of VLAN ID's that are stored in the rcPrFilterAclVlanList. |
| 1.3.6.1.4.1.2272.1.202.1.1.2.3.1.1.13 | ColumnrcPrFilterAclPktType | read-write | current | Indicates the packet type that this ACL is applicable to. |
| 1.3.6.1.4.1.2272.1.202.1.1.2.3.1.1.14 | ColumnrcPrFilterAclControlPktRule | read-write | current | When the rcPrFilterAclDefaultAction object is set to deny then control packets follow this rule. Otherwise, the object value can be ignored. |
| 1.3.6.1.4.1.2272.1.202.1.1.2.3.1.1.15 | ColumnrcPrFilterAclVlanId | read-write | current | Destination Vlan Id for mirroring the packets. The value 0 means no vlan is being mirrored. When the value of rcPrFilterAclVlanId is non-zero, the values of rc… |
| 1.3.6.1.4.1.2272.1.202.1.1.2.3.1.1.16 | ColumnrcPrFilterAclMltId | read-write | current | Destination Mlt Id for mirroring the packets. The value 0 means no mlt is being mirrored. When the value of rcPrFilterAclMltId is non-zero, the values of rcPrF… |
| 1.3.6.1.4.1.2272.1.202.1.1.2.3.1.1.17 | ColumnrcPrFilterAclDstPortList | read-write | current | Destination Port List for mirroring the packets. The value 0 means no port(s) is being mirrored. When the value of rcPrFilterAclDstPortList is non-zero, the va… |
| 1.3.6.1.4.1.2272.1.202.1.1.2.3.1.1.18 | ColumnrcPrFilterAclIpfixState | read-write | current | Value indicating whether ipfix option on the Acl is enabled. |
| 1.3.6.1.4.1.2272.1.202.1.1.2.3.2 | TablercPrFilterAclStatsTable | not-accessible | current | A table of Acls Statistics entries to store the Default Acl statistics for each Acl. This table is indexed by the Acl Id. |
| 1.3.6.1.4.1.2272.1.202.1.1.2.3.2.1 | RowrcPrFilterAclStatsEntry | not-accessible | current | Entry containing default statistics information for a particular Acl. |
| 1.3.6.1.4.1.2272.1.202.1.1.2.3.2.1.1 | ColumnrcPrFilterAclStatsAclId | read-only | current | A unique identifier for Acl entry in the range of Table Size. |
| 1.3.6.1.4.1.2272.1.202.1.1.2.3.2.1.2 | ColumnrcPrFilterAclStatsMatchDefaultCounterPkts | read-only | current | Packet count of traffic not matching any of the Ace rules or hit the Default Action that have the count bit turned on in Acl Global Action. |
| 1.3.6.1.4.1.2272.1.202.1.1.2.3.2.1.3 | ColumnrcPrFilterAclStatsMatchDefaultOctets | read-only | current | Byte count of traffic not matching any of the Ace rules or hit the Default Action that have the count bit turned on in Acl Global Action. |
| 1.3.6.1.4.1.2272.1.202.1.1.2.3.2.1.4 | ColumnrcPrFilterAclStatsClear | read-write | current | Clear default statistics for ACL Filters. |
| 1.3.6.1.4.1.2272.1.202.1.1.2.3.2.1.5 | ColumnrcPrFilterAclStatsMatchDefaultSecurityPkts | read-only | current | Security packet count of traffic not matching any of the ACE rules or hits on Default Action where the count bit is turned on in ACL Global Action. |
| 1.3.6.1.4.1.2272.1.202.1.1.2.3.2.1.6 | ColumnrcPrFilterAclStatsMatchDefaultSecurityOctets | read-only | current | Security octet count of traffic not matching any of the ACE rules or hits on Default Action where the count bit is turned on in ACL Global Action. |
| 1.3.6.1.4.1.2272.1.202.1.1.2.3.2.1.7 | ColumnrcPrFilterAclStatsMatchDefaultQosPkts | read-only | current | QOS packet count of traffic not matching any of the ACE rules or hits on Default Action where the count bit is turned on in ACL Global Action. |
| 1.3.6.1.4.1.2272.1.202.1.1.2.3.2.1.8 | ColumnrcPrFilterAclStatsMatchDefaultQosOctets | read-only | current | QOS octet count of traffic not matching any of the ACE rules or hits on Default Action where the count bit is turned on in ACL Global Action. |
| 1.3.6.1.4.1.2272.1.202.1.1.2.3.2.1.9 | ColumnrcPrFilterAclStatsMatchGlobalSecurityPkts | read-only | current | Security packet count of traffic matching any of the ACE rules or hits on Default Action where the count bit is turned on in ACL Global Action. |
| 1.3.6.1.4.1.2272.1.202.1.1.2.3.2.1.10 | ColumnrcPrFilterAclStatsMatchGlobalSecurityOctets | read-only | current | Security octet count of traffic matching any of the ACE rules or hits on Default Action where the count bit is turned on in ACL Global Action. |
| 1.3.6.1.4.1.2272.1.202.1.1.2.3.2.1.11 | ColumnrcPrFilterAclStatsMatchGlobalQosPkts | read-only | current | QOS packet count of traffic matching any of the ACE rules or hits on Default Action where the count bit is turned on in ACL Global Action. |
| 1.3.6.1.4.1.2272.1.202.1.1.2.3.2.1.12 | ColumnrcPrFilterAclStatsMatchGlobalQosOctets | read-only | current | QOS octet count of traffic matching any of the ACE rules or hits on Default Action where the count bit is turned on in ACL Global Action. |
| 1.3.6.1.4.1.2272.1.202.1.1.2.4 | NodercPrFilterAce | |||
| 1.3.6.1.4.1.2272.1.202.1.1.2.4.1 | TablercPrFilterAceTable | not-accessible | current | A table of Aces to store information of each Ace in context of its parent Acl. This is indexed by AclId and AceId. |
| 1.3.6.1.4.1.2272.1.202.1.1.2.4.1.1 | RowrcPrFilterAceEntry | not-accessible | current | One Ace entry holding Ace information. Ace is a member of one Acl. |
| 1.3.6.1.4.1.2272.1.202.1.1.2.4.1.1.1 | ColumnrcPrFilterAceAclId | read-only | current | An index to the AceEntry, a unique identifier for Acl entry in the range of Table Size. |
| 1.3.6.1.4.1.2272.1.202.1.1.2.4.1.1.2 | ColumnrcPrFilterAceId | read-only | current | AceId uniquely identifies one Ace entry. |
| 1.3.6.1.4.1.2272.1.202.1.1.2.4.1.1.3 | ColumnrcPrFilterAceName | read-write | current | A descriptive name chosen by the administrator. System automatically assigns a name if the user has not assigned one. |
| 1.3.6.1.4.1.2272.1.202.1.1.2.4.1.1.4 | ColumnrcPrFilterAceMode | read-write | current | Operating Mode associated with the Ace is effective on the packets matching this Ace. |
| 1.3.6.1.4.1.2272.1.202.1.1.2.4.1.1.5 | ColumnrcPrFilterAceRemarkDscp | read-write | current | The 6-bit DSCP field from the ToS byte in Ipv4 header encodes the PHB information per DiffServ standards (Refer to DiffServ RFCs 2474). Set the Dscp to PHB (li… |
| 1.3.6.1.4.1.2272.1.202.1.1.2.4.1.1.6 | ColumnrcPrFilterAceRemarkDot1Priority | read-write | current | Dot1 Priority as described by Layer 2 standards, 802.1Q, 802.1P. |
| 1.3.6.1.4.1.2272.1.202.1.1.2.4.1.1.7 | ColumnrcPrFilterAceRedirectNextHop | read-write | current | Redirect matching IP traffic to the next hop. |
| 1.3.6.1.4.1.2272.1.202.1.1.2.4.1.1.8 | ColumnrcPrFilterAceRedirectUnreach | read-write | current | Set the desired behavior for redirected traffic in case the specified next-hop is not reachable. |
| 1.3.6.1.4.1.2272.1.202.1.1.2.4.1.1.9 | ColumnrcPrFilterAcePolice | read-write | current | Policing profile Identifier. Set the desired policing profile identifier. Set the value to 0 when policing is not desired. |
| 1.3.6.1.4.1.2272.1.202.1.1.2.4.1.1.10 | ColumnrcPrFilterAceAdminState | read-write | current | Value indicating whether the Ace is enabled. An Ace can only be modified if it is disabled. |
| 1.3.6.1.4.1.2272.1.202.1.1.2.4.1.1.11 | ColumnrcPrFilterAceOperState | read-only | current | The current operational state of the Ace. |
| 1.3.6.1.4.1.2272.1.202.1.1.2.4.1.1.12 | ColumnrcPrFilterAceEgressQueue | read-write | current | Indicates the Egress Queue for 10/100 card. If only 1 value is specified then this value is applied to Queue1g and Queue10g as well. If 2 values are specified … |
| 1.3.6.1.4.1.2272.1.202.1.1.2.4.1.1.13 | ColumnrcPrFilterAceEgressQueue1g | read-write | current | Indicates the Egress Queue for 1gig card. |
| 1.3.6.1.4.1.2272.1.202.1.1.2.4.1.1.14 | ColumnrcPrFilterAceEgressQueue10g | read-write | current | Indicates the Egress Queue for 10gig card. |
| 1.3.6.1.4.1.2272.1.202.1.1.2.4.1.1.15 | ColumnrcPrFilterAceEgressQueueNNSC | read-write | current | Ace Egress Queue NNSC. |
| 1.3.6.1.4.1.2272.1.202.1.1.2.4.1.1.16 | ColumnrcPrFilterAceFlags | read-write | current | Bitmask for the flags: none(0): Default value for the flags. stopOnMatch(1): set desired behavior for flag whether to stop or continue in case an Ace matching … |
| 1.3.6.1.4.1.2272.1.202.1.1.2.4.1.1.17 | ColumnrcPrFilterAceStopOnMatch | read-write | current | Value indicating whether stop-on-match option on the Ace is enabled. |
| 1.3.6.1.4.1.2272.1.202.1.1.2.4.1.1.18 | ColumnrcPrFilterAceMltIndex | read-write | current | If this action is specified, it will basically override the mlt-index picked by the mlt algorithm, when a packet is being sent out on MLT ports. |
| 1.3.6.1.4.1.2272.1.202.1.1.2.4.1.1.19 | ColumnrcPrFilterAceRowStatus | read-write | current | Create/delete operations for this entry. |
| 1.3.6.1.4.1.2272.1.202.1.1.2.4.1.1.20 | ColumnrcPrFilterAceIpfixState | read-write | current | Value indicating whether ipfix option on the Ace is enabled. |
| 1.3.6.1.4.1.2272.1.202.1.1.2.4.1.1.21 | ColumnrcPrFilterAceRedirectNextHopIpv6 | read-write | current | Redirect matching IPv6 traffic to the next hop. |
| 1.3.6.1.4.1.2272.1.202.1.1.2.4.1.1.22 | ColumnrcPrFilterAceDstPortList | read-create | current | Destination Port List for mirroring the packets. |
| 1.3.6.1.4.1.2272.1.202.1.1.2.4.1.1.23 | ColumnrcPrFilterAceDstVlanId | read-create | current | Destination Vlan to mirror the packets. |
| 1.3.6.1.4.1.2272.1.202.1.1.2.4.1.1.24 | ColumnrcPrFilterAceDstMltId | read-create | current | Destination Mlt to mirror the packets. |
| 1.3.6.1.4.1.2272.1.202.1.1.2.4.1.1.25 | ColumnrcPrFilterAceInternalQos | read-write | current | Internal QOS Level assigned to the packet flow. DefVal = 8 is Disable |
| 1.3.6.1.4.1.2272.1.202.1.1.2.4.1.1.26 | ColumnrcPrFilterAceCount | read-write | current | Value indicating whether Count option on the Ace is enabled. |
| 1.3.6.1.4.1.2272.1.202.1.1.2.4.1.1.27 | ColumnrcPrFilterAceLog | read-write | current | Value indicating whether log option on the Ace is enabled. |
| 1.3.6.1.4.1.2272.1.202.1.1.2.4.1.1.28 | ColumnrcPrFilterAceCopytoPcap | read-write | current | Value indicating whether copy to pcap option on the Ace is enabled. |
| 1.3.6.1.4.1.2272.1.202.1.1.2.4.1.1.29 | ColumnrcPrFilterAceDstIp | read-write | current | Destination IP address to mirror the packets. |
| 1.3.6.1.4.1.2272.1.202.1.1.2.4.1.1.30 | ColumnrcPrFilterAceDstIpTtl | read-write | current | Ttl value for the mirrored packet when mirror destination is IP. If other than default, the encapsulated packet will have the given ttl. |
| 1.3.6.1.4.1.2272.1.202.1.1.2.4.1.1.31 | ColumnrcPrFilterAceDstIpDscp | read-write | current | Dscp value for the mirrored packet when mirror destination is IP. The 6-bit DSCP field from the ToS byte in Ipv4 header encodes the PHB information per DiffSer… |
| 1.3.6.1.4.1.2272.1.202.1.1.2.4.1.1.32 | ColumnrcPrFilterAceMonitoringIsidOffset | read-create | current | Used to configure the monitoring ISID offset value. The offset id value is mapped to actual monitor I-SID value in which packets are mirrored to. |
| 1.3.6.1.4.1.2272.1.202.1.1.2.4.1.1.33 | ColumnrcPrFilterAceMonitoringIsid | read-only | current | Actual monitor I-SID value in which packets are mirrored to. |
| 1.3.6.1.4.1.2272.1.202.1.1.2.4.1.1.34 | ColumnrcPrFilterAceMirroringQos | read-create | current | Used to define the Quality of Service (QoS) profiles for the mirrored packet into monitoring ISID. |
| 1.3.6.1.4.1.2272.1.202.1.1.2.4.1.1.35 | ColumnrcPrFilterAceRemoveTag | read-create | current | Used to remove inner vlan tag of the mirrored packet into the SPB network. By default it is set to false and vlan tag will not be removed. |
| 1.3.6.1.4.1.2272.1.202.1.1.2.4.1.1.36 | ColumnrcPrFilterAceRedirectNextHopVrfName | read-write | current | VRF Name associated with IP/IPv6 redirect next hop. |
| 1.3.6.1.4.1.2272.1.202.1.1.2.4.2 | TablercPrFilterAceEthSrcAddrTable | not-accessible | current | A table of Aces to store Ethernet Source MAC Address Header information of each Ace in context of its parent Acl. |
| 1.3.6.1.4.1.2272.1.202.1.1.2.4.2.1 | RowrcPrFilterAceEthSrcAddrEntry | not-accessible | current | One Ace entry holding Ace Ethernet Source MAC Address information. An Ace is a member of one Acl. |
| 1.3.6.1.4.1.2272.1.202.1.1.2.4.2.1.1 | ColumnrcPrFilterAceEthSrcAddrAclId | read-only | current | An index to the AceEthernetEntry, a unique identifier for Acl entry in the range of Table Size. |
| 1.3.6.1.4.1.2272.1.202.1.1.2.4.2.1.2 | ColumnrcPrFilterAceEthSrcAddrAceId | read-only | current | An index to the AceEthernetEntry, a unique identifier for Acl entry in the range of Table Size. |
| 1.3.6.1.4.1.2272.1.202.1.1.2.4.2.1.3 | ColumnrcPrFilterAceEthSrcAddrList | read-write | current | The list of ethernet source address to match. |
| 1.3.6.1.4.1.2272.1.202.1.1.2.4.2.1.4 | ColumnrcPrFilterAceEthSrcAddrListCount | read-write | current | Count to store the number of discrete ranges entered for the ethernet src address. |
| 1.3.6.1.4.1.2272.1.202.1.1.2.4.2.1.5 | ColumnrcPrFilterAceEthSrcAddrOper | read-write | current | Operators for Ace Ethernet Source MAC Address. |
| 1.3.6.1.4.1.2272.1.202.1.1.2.4.2.1.6 | ColumnrcPrFilterAceEthSrcAddrRowStatus | read-write | current | Create/delete operations for this entry. |
| 1.3.6.1.4.1.2272.1.202.1.1.2.4.2.1.7 | ColumnrcPrFilterAceEthSrcAddrOperMask | read-write | current | The Mac Address mask value in hex which can be set for the rcPrFilterAceEthSrcAddrOper when the option selected is mask. It will be empty or set to 00000000000… |
| 1.3.6.1.4.1.2272.1.202.1.1.2.4.3 | TablercPrFilterAceEthDstAddrTable | not-accessible | current | A table of Aces to store Ethernet Destination MAC Address Header information of each Ace in context of its parent Acl. |
| 1.3.6.1.4.1.2272.1.202.1.1.2.4.3.1 | RowrcPrFilterAceEthDstAddrEntry | not-accessible | current | One Ace entry holding Ace Ethernet Destination MAC Address information. An Ace is a member of one Acl. |
| 1.3.6.1.4.1.2272.1.202.1.1.2.4.3.1.1 | ColumnrcPrFilterAceEthDstAddrAclId | read-only | current | An index to the AceEthDstAddrEntry, a unique identifier for Acl entry in the range of Table Size. |
| 1.3.6.1.4.1.2272.1.202.1.1.2.4.3.1.2 | ColumnrcPrFilterAceEthDstAddrAceId | read-only | current | An index to the AceEthDstAddrEntry, a unique identifier for Acl entry in the range of Table Size. |
| 1.3.6.1.4.1.2272.1.202.1.1.2.4.3.1.3 | ColumnrcPrFilterAceEthDstAddrList | read-write | current | List of ethernet destination address to match. |
| 1.3.6.1.4.1.2272.1.202.1.1.2.4.3.1.4 | ColumnrcPrFilterAceEthDstAddrListCount | read-write | current | Count to store the number of discrete ranges entered for the ethernet dst address. |
| 1.3.6.1.4.1.2272.1.202.1.1.2.4.3.1.5 | ColumnrcPrFilterAceEthDstAddrOper | read-write | current | Operators for Ace Ethernet Destination MAC Address. |
| 1.3.6.1.4.1.2272.1.202.1.1.2.4.3.1.6 | ColumnrcPrFilterAceEthDstAddrRowStatus | read-write | current | Create/delete operations for this entry. |
| 1.3.6.1.4.1.2272.1.202.1.1.2.4.3.1.7 | ColumnrcPrFilterAceEthDstAddrOperMask | read-write | current | The Mac Address mask value in hex which can be set for the rcPrFilterAceEthDstAddrOper when the option selected is mask. It will be empty or set to 00000000000… |
| 1.3.6.1.4.1.2272.1.202.1.1.2.4.4 | TablercPrFilterAceEthEtherTable | not-accessible | current | A table of Aces to store Ethernet Ether Header information of each Ace in context of its parent Acl. |
| 1.3.6.1.4.1.2272.1.202.1.1.2.4.4.1 | RowrcPrFilterAceEthEtherEntry | not-accessible | current | One Ace entry holding Ace Ethernet Ether information. An Ace is a member of one Acl. |
| 1.3.6.1.4.1.2272.1.202.1.1.2.4.4.1.1 | ColumnrcPrFilterAceEthEtherAclId | read-only | current | An index to the AceEthEtherEntry, a unique identifier for Acl entry in the range of Table Size. |
| 1.3.6.1.4.1.2272.1.202.1.1.2.4.4.1.2 | ColumnrcPrFilterAceEthEtherAceId | read-only | current | An index to the AceEthEtherEntry, a unique identifier for Acl entry in the range of Table Size. |
| 1.3.6.1.4.1.2272.1.202.1.1.2.4.4.1.3 | ColumnrcPrFilterAceEthEtherTypeList | read-write | current | EtherType value from ethernet header. For example ARP uses 0x0806, IP uses 0x0800. The platform support determines the behavior for 802.1Q/p tagged packets. Th… |
| 1.3.6.1.4.1.2272.1.202.1.1.2.4.4.1.4 | ColumnrcPrFilterAceEthEtherTypeListCount | read-write | current | Count to store the number of discrete ranges entered for the ethernet types. |
| 1.3.6.1.4.1.2272.1.202.1.1.2.4.4.1.5 | ColumnrcPrFilterAceEthEtherTypeOper | read-write | current | Ethernet Type Operators. |
| 1.3.6.1.4.1.2272.1.202.1.1.2.4.4.1.6 | ColumnrcPrFilterAceEthEtherRowStatus | read-write | current | Create/delete operations for this entry. |
| 1.3.6.1.4.1.2272.1.202.1.1.2.4.5 | TablercPrFilterAceEthVlanTagPrioTable | not-accessible | current | A table of Aces to store Ethernet Vlan Tag Priority Header information of each Ace in context of its parent Acl. |
| 1.3.6.1.4.1.2272.1.202.1.1.2.4.5.1 | RowrcPrFilterAceEthVlanTagPrioEntry | not-accessible | current | One Ace entry holding Ace Ethernet Vlan Tag Priority information. An Ace is a member of one Acl. |
| 1.3.6.1.4.1.2272.1.202.1.1.2.4.5.1.1 | ColumnrcPrFilterAceEthVlanTagPrioAclId | read-only | current | An index to the AceEthVlanTagPrioEntry, a unique identifier for Acl entry in the range of Table Size. |
| 1.3.6.1.4.1.2272.1.202.1.1.2.4.5.1.2 | ColumnrcPrFilterAceEthVlanTagPrioAceId | read-only | current | An index to the AceEthVlanTagPrioEntry, a unique identifier for Acl entry in the range of Table Size. |
| 1.3.6.1.4.1.2272.1.202.1.1.2.4.5.1.3 | ColumnrcPrFilterAceEthVlanTagPrioVlanTagPrio | read-write | current | Priority bits (3-bit field) from the 802.1Q/p tag. |
| 1.3.6.1.4.1.2272.1.202.1.1.2.4.5.1.4 | ColumnrcPrFilterAceEthVlanTagPrioOper | read-write | current | Operators for Ace Ethernet Vlan Tag Priority. |
| 1.3.6.1.4.1.2272.1.202.1.1.2.4.5.1.5 | ColumnrcPrFilterAceEthVlanTagPrioRowStatus | read-write | current | Create/delete operations for this entry. |
| 1.3.6.1.4.1.2272.1.202.1.1.2.4.5.1.6 | ColumnrcPrFilterAceEthVlanTagPrioOperMask | read-write | current | The mask value in hex which can be set for the rcPrFilterAceEthVlanTagPrioOper when the option selected is masked. This object is applicable for VSP9000. Not f… |
| 1.3.6.1.4.1.2272.1.202.1.1.2.4.6 | TablercPrFilterAceEthPortTable | not-accessible | current | A table of Aces to store Ethernet Port Header information of each Ace in context of its parent Acl. |
| 1.3.6.1.4.1.2272.1.202.1.1.2.4.6.1 | RowrcPrFilterAceEthPortEntry | not-accessible | current | One Ace entry holding Ace Ethernet Port information. An Ace is a member of one Acl. |
| 1.3.6.1.4.1.2272.1.202.1.1.2.4.6.1.1 | ColumnrcPrFilterAceEthPortAclId | read-only | current | An index to the AceEthPortEntry, a unique identifier for Acl entry in the range of Table Size. |
| 1.3.6.1.4.1.2272.1.202.1.1.2.4.6.1.2 | ColumnrcPrFilterAceEthPortAceId | read-only | current | An index to the AceEthPortEntry, a unique identifier for Acl entry in the range of Table Size. |
| 1.3.6.1.4.1.2272.1.202.1.1.2.4.6.1.3 | ColumnrcPrFilterAceEthPortPort | read-write | current | Port Number or Port List to match on. |
| 1.3.6.1.4.1.2272.1.202.1.1.2.4.6.1.4 | ColumnrcPrFilterAceEthPortOper | read-write | current | Operator for Ace Ethernet Port. |
| 1.3.6.1.4.1.2272.1.202.1.1.2.4.6.1.5 | ColumnrcPrFilterAceEthPortRowStatus | read-write | current | Create/delete operations for this entry. |
| 1.3.6.1.4.1.2272.1.202.1.1.2.4.7 | TablercPrFilterAceEthVlanIdTable | not-accessible | current | A table of Aces to store Ethernet Vlan Id Header information of each Ace in context of its parent Acl. |
| 1.3.6.1.4.1.2272.1.202.1.1.2.4.7.1 | RowrcPrFilterAceEthVlanIdEntry | not-accessible | current | One Ace entry holding Ace Ethernet Vlan Id information. An Ace is a member of one Acl. |
| 1.3.6.1.4.1.2272.1.202.1.1.2.4.7.1.1 | ColumnrcPrFilterAceEthVlanIdAclId | read-only | current | An index to the AceEthVlanIdEntry, a unique identifier for Acl entry in the range of Table Size. |
| 1.3.6.1.4.1.2272.1.202.1.1.2.4.7.1.2 | ColumnrcPrFilterAceEthVlanIdAceId | read-only | current | An index to the AceEthVlanIdEntry, a unique identifier for Acl entry in the range of Table Size. |
| 1.3.6.1.4.1.2272.1.202.1.1.2.4.7.1.3 | ColumnrcPrFilterAceEthVlanIdVlanIdList | read-write | current | Vlan Id to match on. This is a ERS 8600 supported object. VSP9000 uses rcPrFilterAceEthVlanIdVlanId instead |
| 1.3.6.1.4.1.2272.1.202.1.1.2.4.7.1.4 | ColumnrcPrFilterAceEthVlanIdOper | read-write | current | Operator for Ace Ethernet VlanId. |
| 1.3.6.1.4.1.2272.1.202.1.1.2.4.7.1.5 | ColumnrcPrFilterAceEthVlanIdRowStatus | read-write | current | Create/delete operations for this entry. |
| 1.3.6.1.4.1.2272.1.202.1.1.2.4.7.1.6 | ColumnrcPrFilterAceEthVlanIdOperMask | read-write | current | The mask value in hex which can be set for the rcPrFilterAceEthVlanIdOper when the option selected is mask. This object is used with rcPrFilterAceEthVlanIdVlan… |
| 1.3.6.1.4.1.2272.1.202.1.1.2.4.7.1.7 | ColumnrcPrFilterAceEthVlanIdVlanId | read-write | current | Vlan Id to match on. VSP9000 use this object with object rcPrFilterAceEthVlanIdOperMask to replace the rcPrFilterAceEthVlanIdVlanIdList |
| 1.3.6.1.4.1.2272.1.202.1.1.2.4.8 | TablercPrFilterAceArpTable | not-accessible | current | A table of Aces to store Arp Header information of each Ace in context of its parent Acl. |
| 1.3.6.1.4.1.2272.1.202.1.1.2.4.8.1 | RowrcPrFilterAceArpEntry | not-accessible | current | One Ace entry holding Ace Arp Header information. Ace is a member of one Acl. |
| 1.3.6.1.4.1.2272.1.202.1.1.2.4.8.1.1 | ColumnrcPrFilterAceArpAclId | read-only | current | An index to the AceArpEntry, a unique identifier for Acl entry in the range of Table Size. |
| 1.3.6.1.4.1.2272.1.202.1.1.2.4.8.1.2 | ColumnrcPrFilterAceArpAceId | read-only | current | An index to the AceArpEntry, a unique identifier for Acl entry in the range of Table Size. |
| 1.3.6.1.4.1.2272.1.202.1.1.2.4.8.1.3 | ColumnrcPrFilterAceArpType | read-write | current | Ace Arp Operation. |
| 1.3.6.1.4.1.2272.1.202.1.1.2.4.8.1.4 | ColumnrcPrFilterAceArpOper | read-write | current | Operator for Ace Arp Operation. |
| 1.3.6.1.4.1.2272.1.202.1.1.2.4.8.1.5 | ColumnrcPrFilterAceArpValue | read-write | current | Ace Arp can be a request or a response. |
| 1.3.6.1.4.1.2272.1.202.1.1.2.4.8.1.6 | ColumnrcPrFilterAceArpRowStatus | read-write | current | Create/delete operations for this entry. |
| 1.3.6.1.4.1.2272.1.202.1.1.2.4.9 | TablercPrFilterAceIpSrcAddrTable | not-accessible | current | A table of Aces to store IP Source Address Header information of each Ace in context of its parent Acl. |
| 1.3.6.1.4.1.2272.1.202.1.1.2.4.9.1 | RowrcPrFilterAceIpSrcAddrEntry | not-accessible | current | One Ace entry holding Ace IP Source Address Header information. An Ace is a member of one Acl. |
| 1.3.6.1.4.1.2272.1.202.1.1.2.4.9.1.1 | ColumnrcPrFilterAceIpSrcAddrAclId | read-only | current | An index to the AceIpSrcAddrEntry, a unique identifier for Acl entry in the range of Table Size. |
| 1.3.6.1.4.1.2272.1.202.1.1.2.4.9.1.2 | ColumnrcPrFilterAceIpSrcAddrAceId | read-only | current | An index to the AceIpSrcAddrEntry, a unique identifier for Acl entry in the range of Table Size. |
| 1.3.6.1.4.1.2272.1.202.1.1.2.4.9.1.3 | ColumnrcPrFilterAceIpSrcAddrList | read-write | current | The list of ip source address to match from IP header. Not applicable to VSP9000 |
| 1.3.6.1.4.1.2272.1.202.1.1.2.4.9.1.4 | ColumnrcPrFilterAceIpSrcAddrListCount | read-write | current | Count to store the number of discrete ranges entered for the ip src address. Not applicable to VSP9000 |
| 1.3.6.1.4.1.2272.1.202.1.1.2.4.9.1.5 | ColumnrcPrFilterAceIpSrcAddrOper | read-write | current | Operators for Ace Ip Source Address. |
| 1.3.6.1.4.1.2272.1.202.1.1.2.4.9.1.6 | ColumnrcPrFilterAceIpSrcAddrRowStatus | read-write | current | Create/delete operations for this entry. |
| 1.3.6.1.4.1.2272.1.202.1.1.2.4.9.1.7 | ColumnrcPrFilterAceIpSrcAddrIpAddr | read-write | current | IP Source Address to match from IP header. This object is defined and used to replace the rcPrFilterAceIpSrcAddrList by VSP 9000 |
| 1.3.6.1.4.1.2272.1.202.1.1.2.4.9.1.8 | ColumnrcPrFilterAceIpSrcAddrOperMaskRange | read-write | current | The IP Mask value or High IP address based on object rcPrFilterAceIpSrcAddrOper mask/range option is selected. |
| 1.3.6.1.4.1.2272.1.202.1.1.2.4.10 | TablercPrFilterAceIpDstAddrTable | not-accessible | current | A table of Aces to store IP Destination Address Header information of each Ace in context of its parent Acl. |
| 1.3.6.1.4.1.2272.1.202.1.1.2.4.10.1 | RowrcPrFilterAceIpDstAddrEntry | not-accessible | current | One Ace entry holding Ace IP Destination Address Header information. An Ace is a member of one Acl. |
| 1.3.6.1.4.1.2272.1.202.1.1.2.4.10.1.1 | ColumnrcPrFilterAceIpDstAddrAclId | read-only | current | An index to the AceIpDstAddrEntry, a unique identifier for Acl entry in the range of Table Size. |
| 1.3.6.1.4.1.2272.1.202.1.1.2.4.10.1.2 | ColumnrcPrFilterAceIpDstAddrAceId | read-only | current | An index to the AceIpDstAddrEntry, a unique identifier for Acl entry in the range of Table Size. |
| 1.3.6.1.4.1.2272.1.202.1.1.2.4.10.1.3 | ColumnrcPrFilterAceIpDstAddrList | read-write | current | The list of ip dst address to match from IP header. Not applicable to VSP9000 |
| 1.3.6.1.4.1.2272.1.202.1.1.2.4.10.1.4 | ColumnrcPrFilterAceIpDstAddrListCount | read-write | current | Count to store the number of discrete ranges entered for the IP Destination Address. Not applicable to VSP9000 |
| 1.3.6.1.4.1.2272.1.202.1.1.2.4.10.1.5 | ColumnrcPrFilterAceIpDstAddrOper | read-write | current | Operators for Ace IP Destination Address. |
| 1.3.6.1.4.1.2272.1.202.1.1.2.4.10.1.6 | ColumnrcPrFilterAceIpDstAddrRowStatus | read-write | current | Create/delete operations for this entry. |
| 1.3.6.1.4.1.2272.1.202.1.1.2.4.10.1.7 | ColumnrcPrFilterAceIpDstAddrIpAddr | read-write | current | IP Source Address to match from IP header. This object is defined and used to replace the rcPrFilterAceIpSrcAddrList by VSP 9000 |
| 1.3.6.1.4.1.2272.1.202.1.1.2.4.10.1.8 | ColumnrcPrFilterAceIpDstAddrOperMaskRange | read-write | current | The IP mask value or Hi Ip address based on object rcPrFilterAceIpDstAddrOper mask/range option is selected. |
| 1.3.6.1.4.1.2272.1.202.1.1.2.4.11 | TablercPrFilterAceIpDscpTable | not-accessible | current | A table of Aces to store IP Dscp Header information of each Ace in context of its parent Acl. |
| 1.3.6.1.4.1.2272.1.202.1.1.2.4.11.1 | RowrcPrFilterAceIpDscpEntry | not-accessible | current | One Ace entry holding Ace IP Dscp Header information. An Ace is a member of one Acl. |
| 1.3.6.1.4.1.2272.1.202.1.1.2.4.11.1.1 | ColumnrcPrFilterAceIpDscpAclId | read-only | current | An index to the AceIpDscpEntry, a unique identifier for Acl entry in the range of Table Size. |
| 1.3.6.1.4.1.2272.1.202.1.1.2.4.11.1.2 | ColumnrcPrFilterAceIpDscpAceId | read-only | current | An index to the AceIpDscpEntry, a unique identifier for Acl entry in the range of Table Size. |
| 1.3.6.1.4.1.2272.1.202.1.1.2.4.11.1.3 | ColumnrcPrFilterAceIpDscpList | read-write | current | The 6-bit DSCP field from the ToS byte in Ipv4 header encodes the PHB information per DiffServ standards (Refer to DiffServ RFCs 2474). Set the Dscp to PHB (li… |
| 1.3.6.1.4.1.2272.1.202.1.1.2.4.11.1.4 | ColumnrcPrFilterAceIpDscpListCount | read-write | current | Count to store the number of discrete ranges entered for the dscp values. |
| 1.3.6.1.4.1.2272.1.202.1.1.2.4.11.1.5 | ColumnrcPrFilterAceIpDscpOper | read-write | current | Operators for Ace Ip Dscp. |
| 1.3.6.1.4.1.2272.1.202.1.1.2.4.11.1.6 | ColumnrcPrFilterAceIpDscpRowStatus | read-write | current | Create/delete operations for this entry. |
| 1.3.6.1.4.1.2272.1.202.1.1.2.4.11.1.7 | ColumnrcPrFilterAceIpDscpOperMask | read-write | current | The mask value in hex which can be set for the rcPrFilterAceIpDscpOper when the option selected is mask. It will be set to 0 or be used when rcPrFilterAceIpDsc… |
| 1.3.6.1.4.1.2272.1.202.1.1.2.4.12 | TablercPrFilterAceIpProtoTable | not-accessible | current | A table of Aces to store IP Proto Header information of each Ace in context of its parent Acl. |
| 1.3.6.1.4.1.2272.1.202.1.1.2.4.12.1 | RowrcPrFilterAceIpProtoEntry | not-accessible | current | One Ace entry holding Ace IP Proto Header information. An Ace is a member of one Acl. |
| 1.3.6.1.4.1.2272.1.202.1.1.2.4.12.1.1 | ColumnrcPrFilterAceIpProtoAclId | read-only | current | An index to the AceIpProtoEntry, a unique identifier for Acl entry in the range of Table Size. |
| 1.3.6.1.4.1.2272.1.202.1.1.2.4.12.1.2 | ColumnrcPrFilterAceIpProtoAceId | read-only | current | An index to the AceIpProtoEntry, a unique identifier for Acl entry in the range of Table Size. |
| 1.3.6.1.4.1.2272.1.202.1.1.2.4.12.1.3 | ColumnrcPrFilterAceIpProtoList | read-write | current | Ip protocol Type from the ip header to be matched. Valid Ip protocol range is 0..255. Few of the Protocol Types are enumerated above. In case the desired proto… |
| 1.3.6.1.4.1.2272.1.202.1.1.2.4.12.1.4 | ColumnrcPrFilterAceIpProtoListCount | read-write | current | Count to store the number of discrete ranges entered for the ethernet protocol ids. |
| 1.3.6.1.4.1.2272.1.202.1.1.2.4.12.1.5 | ColumnrcPrFilterAceIpProtoOper | read-write | current | Operators for Ace Ip Protocols. |
| 1.3.6.1.4.1.2272.1.202.1.1.2.4.12.1.6 | ColumnrcPrFilterAceIpProtoRowStatus | read-write | current | Create/delete operations for this entry. |
| 1.3.6.1.4.1.2272.1.202.1.1.2.4.13 | TablercPrFilterAceIpOptionsTable | not-accessible | current | A table of Aces to store IP Options Header information of each Ace in context of its parent Acl. |
| 1.3.6.1.4.1.2272.1.202.1.1.2.4.13.1 | RowrcPrFilterAceIpOptionsEntry | not-accessible | current | One Ace entry holding Ace IP Options Header information. An Ace is a member of one Acl. |
| 1.3.6.1.4.1.2272.1.202.1.1.2.4.13.1.1 | ColumnrcPrFilterAceIpOptionsAclId | read-only | current | An index to the AceIpOptionsEntry, a unique identifier for Acl entry in the range of Table Size. |
| 1.3.6.1.4.1.2272.1.202.1.1.2.4.13.1.2 | ColumnrcPrFilterAceIpOptionsAceId | read-only | current | An index to the AceIpOptionsEntry, a unique identifier for Acl entry in the range of Table Size. |
| 1.3.6.1.4.1.2272.1.202.1.1.2.4.13.1.3 | ColumnrcPrFilterAceIpOptionsOptions | read-write | current | Ip options to be matched from the IP Header. |
| 1.3.6.1.4.1.2272.1.202.1.1.2.4.13.1.4 | ColumnrcPrFilterAceIpOptionsOper | read-write | current | Logical Operator - only 'any' is valid at present. |
| 1.3.6.1.4.1.2272.1.202.1.1.2.4.13.1.5 | ColumnrcPrFilterAceIpOptionsRowStatus | read-write | current | Create/delete operations for this entry. |
| 1.3.6.1.4.1.2272.1.202.1.1.2.4.14 | TablercPrFilterAceIpFragTable | not-accessible | current | A table of Aces to store IP Fragmentation Header information of each Ace in context of its parent Acl. |
| 1.3.6.1.4.1.2272.1.202.1.1.2.4.14.1 | RowrcPrFilterAceIpFragEntry | not-accessible | current | One Ace entry holding Ace IP Fragmentation Header information. An Ace is a member of one Acl. |
| 1.3.6.1.4.1.2272.1.202.1.1.2.4.14.1.1 | ColumnrcPrFilterAceIpFragAclId | read-only | current | An index to the AceIpFragEntry, a unique identifier for Acl entry in the range of Table Size. |
| 1.3.6.1.4.1.2272.1.202.1.1.2.4.14.1.2 | ColumnrcPrFilterAceIpFragAceId | read-only | current | An index to the AceIpFragEntry, a unique identifier for Acl entry in the range of Table Size. |
| 1.3.6.1.4.1.2272.1.202.1.1.2.4.14.1.3 | ColumnrcPrFilterAceIpFragFragmentation | read-write | current | Ip Fragmentation bits to be matched from the IP Header. |
| 1.3.6.1.4.1.2272.1.202.1.1.2.4.14.1.4 | ColumnrcPrFilterAceIpFragOper | read-write | current | Operator for Ip fragmentation. |
| 1.3.6.1.4.1.2272.1.202.1.1.2.4.14.1.5 | ColumnrcPrFilterAceIpFragRowStatus | read-write | current | Create/delete operations for this entry. |
| 1.3.6.1.4.1.2272.1.202.1.1.2.4.15 | TablercPrFilterAceProtoTcpSrcPortTable | not-accessible | current | A table of Aces to store TCP Source Port information of each Ace in context of its parent Acl. |
| 1.3.6.1.4.1.2272.1.202.1.1.2.4.15.1 | RowrcPrFilterAceProtoTcpSrcPortEntry | not-accessible | current | One entry holding Ace Protocol TCP Source Port information. An Ace is a member of one Acl. |
| 1.3.6.1.4.1.2272.1.202.1.1.2.4.15.1.1 | ColumnrcPrFilterAceProtoTcpSrcPortAclId | read-only | current | An index to the AceProtoTcpSrcPortEntry, a unique identifier for Acl entry in the range of Table Size. |
| 1.3.6.1.4.1.2272.1.202.1.1.2.4.15.1.2 | ColumnrcPrFilterAceProtoTcpSrcPortAceId | read-only | current | An index to the AceProtoTcpSrcPortEntry, a unique identifier for Ace entry in the range of Table Size. |
| 1.3.6.1.4.1.2272.1.202.1.1.2.4.15.1.3 | ColumnrcPrFilterAceProtoTcpSrcPortPort | read-write | current | Port Number or Port List to match on. |
| 1.3.6.1.4.1.2272.1.202.1.1.2.4.15.1.4 | ColumnrcPrFilterAceProtoTcpSrcPortCount | read-write | current | Count to store the number of discrete ranges entered for the TCP source port. |
| 1.3.6.1.4.1.2272.1.202.1.1.2.4.15.1.5 | ColumnrcPrFilterAceProtoTcpSrcPortOper | read-write | current | Operator for Ace Protocol TcpSrcPort. |
| 1.3.6.1.4.1.2272.1.202.1.1.2.4.15.1.6 | ColumnrcPrFilterAceProtoTcpSrcPortRowStatus | read-write | current | Create/delete operations for this entry. |
| 1.3.6.1.4.1.2272.1.202.1.1.2.4.16 | TablercPrFilterAceProtoUdpSrcPortTable | not-accessible | current | A table of Aces to store UDP Source Port information of each Ace in context of its parent Acl. |
| 1.3.6.1.4.1.2272.1.202.1.1.2.4.16.1 | RowrcPrFilterAceProtoUdpSrcPortEntry | not-accessible | current | One entry holding Ace Protocol UDP Source Port information. An Ace is a member of one Acl. |
| 1.3.6.1.4.1.2272.1.202.1.1.2.4.16.1.1 | ColumnrcPrFilterAceProtoUdpSrcPortAclId | read-only | current | An index to the AceProtoUdpSrcPortEntry, a unique identifier for Acl entry in the range of Table Size. |
| 1.3.6.1.4.1.2272.1.202.1.1.2.4.16.1.2 | ColumnrcPrFilterAceProtoUdpSrcPortAceId | read-only | current | An index to the AceProtoUdpSrcPortEntry, a unique identifier for Ace entry in the range of Table Size. |
| 1.3.6.1.4.1.2272.1.202.1.1.2.4.16.1.3 | ColumnrcPrFilterAceProtoUdpSrcPortPort | read-write | current | Port Number or Port List to match on. |
| 1.3.6.1.4.1.2272.1.202.1.1.2.4.16.1.4 | ColumnrcPrFilterAceProtoUdpSrcPortCount | read-write | current | Count to store the number of discrete ranges entered for the UDP source port. |
| 1.3.6.1.4.1.2272.1.202.1.1.2.4.16.1.5 | ColumnrcPrFilterAceProtoUdpSrcPortOper | read-write | current | Operator for Ace Protocol UdpSrcPort. |
| 1.3.6.1.4.1.2272.1.202.1.1.2.4.16.1.6 | ColumnrcPrFilterAceProtoUdpSrcPortRowStatus | read-write | current | Create/delete operations for this entry. |
| 1.3.6.1.4.1.2272.1.202.1.1.2.4.17 | TablercPrFilterAceProtoTcpDstPortTable | not-accessible | current | A table of Aces to store TCP Dest Port information of each Ace in context of its parent Acl. |
| 1.3.6.1.4.1.2272.1.202.1.1.2.4.17.1 | RowrcPrFilterAceProtoTcpDstPortEntry | not-accessible | current | One entry holding Ace Protocol TCP Dest Port information. An Ace is a member of one Acl. |
| 1.3.6.1.4.1.2272.1.202.1.1.2.4.17.1.1 | ColumnrcPrFilterAceProtoTcpDstPortAclId | read-only | current | An index to the AceProtoTcpDstPortEntry, a unique identifier for Acl entry in the range of Table Size. |
| 1.3.6.1.4.1.2272.1.202.1.1.2.4.17.1.2 | ColumnrcPrFilterAceProtoTcpDstPortAceId | read-only | current | An index to the AceProtoTcpDstPortEntry, a unique identifier for Ace entry in the range of Table Size. |
| 1.3.6.1.4.1.2272.1.202.1.1.2.4.17.1.3 | ColumnrcPrFilterAceProtoTcpDstPortPort | read-write | current | Port Number or Port List to match on. |
| 1.3.6.1.4.1.2272.1.202.1.1.2.4.17.1.4 | ColumnrcPrFilterAceProtoTcpDstPortCount | read-write | current | Count to store the number of discrete ranges entered for the TCP dest port. |
| 1.3.6.1.4.1.2272.1.202.1.1.2.4.17.1.5 | ColumnrcPrFilterAceProtoTcpDstPortOper | read-write | current | Operator for Ace Protocol TcpDstPort. |
| 1.3.6.1.4.1.2272.1.202.1.1.2.4.17.1.6 | ColumnrcPrFilterAceProtoTcpDstPortRowStatus | read-write | current | Create/delete operations for this entry. |
| 1.3.6.1.4.1.2272.1.202.1.1.2.4.18 | TablercPrFilterAceProtoUdpDstPortTable | not-accessible | current | A table of Aces to store UDP Dest Port information of each Ace in context of its parent Acl. |
| 1.3.6.1.4.1.2272.1.202.1.1.2.4.18.1 | RowrcPrFilterAceProtoUdpDstPortEntry | not-accessible | current | One entry holding Ace Protocol UDP Dest Port information. An Ace is a member of one Acl. |
| 1.3.6.1.4.1.2272.1.202.1.1.2.4.18.1.1 | ColumnrcPrFilterAceProtoUdpDstPortAclId | read-only | current | An index to the AceProtoUdpDstPortEntry, a unique identifier for Acl entry in the range of Table Size. |
| 1.3.6.1.4.1.2272.1.202.1.1.2.4.18.1.2 | ColumnrcPrFilterAceProtoUdpDstPortAceId | read-only | current | An index to the AceProtoUdpDstPortEntry, a unique identifier for Ace entry in the range of Table Size. |
| 1.3.6.1.4.1.2272.1.202.1.1.2.4.18.1.3 | ColumnrcPrFilterAceProtoUdpDstPortPort | read-write | current | Port Number or Port List to match on. |
| 1.3.6.1.4.1.2272.1.202.1.1.2.4.18.1.4 | ColumnrcPrFilterAceProtoUdpDstPortCount | read-write | current | Count to store the number of discrete ranges entered for the UDP dest port. |
| 1.3.6.1.4.1.2272.1.202.1.1.2.4.18.1.5 | ColumnrcPrFilterAceProtoUdpDstPortOper | read-write | current | Operator for Ace Protocol UdpDstPort. |
| 1.3.6.1.4.1.2272.1.202.1.1.2.4.18.1.6 | ColumnrcPrFilterAceProtoUdpDstPortRowStatus | read-write | current | Create/delete operations for this entry. |
| 1.3.6.1.4.1.2272.1.202.1.1.2.4.19 | TablercPrFilterAceProtoIcmpMsgTypeTable | not-accessible | current | A table of Aces to store ICMP message type information of each Ace in context of its parent Acl. |
| 1.3.6.1.4.1.2272.1.202.1.1.2.4.19.1 | RowrcPrFilterAceProtoIcmpMsgTypeEntry | not-accessible | current | One entry holding Ace ICMP message type information. An Ace is a member of one Acl. |
| 1.3.6.1.4.1.2272.1.202.1.1.2.4.19.1.1 | ColumnrcPrFilterAceProtoIcmpMsgTypeAclId | read-only | current | An index to the AceProtoIcmpMsgTypeEntry, a unique identifier for Acl entry in the range of Table Size. |
| 1.3.6.1.4.1.2272.1.202.1.1.2.4.19.1.2 | ColumnrcPrFilterAceProtoIcmpMsgTypeAceId | read-only | current | An index to the AceProtoIcmpMsgTypeEntry, a unique identifier for Ace entry in the range of Table Size. |
| 1.3.6.1.4.1.2272.1.202.1.1.2.4.19.1.3 | ColumnrcPrFilterAceProtoIcmpMsgTypeList | read-write | current | One or a list of Icmp messages to be matched. Need to provide strings, number of protocol header types (pre-defined values plus user-defined headers). Valid ra… |
| 1.3.6.1.4.1.2272.1.202.1.1.2.4.19.1.4 | ColumnrcPrFilterAceProtoIcmpMsgTypeCount | read-write | current | Count to store the number of discrete ranges entered for the ICMP message types. |
| 1.3.6.1.4.1.2272.1.202.1.1.2.4.19.1.5 | ColumnrcPrFilterAceProtoIcmpMsgTypeOper | read-write | current | Operator for Ace Protocol IcmpMsgTypes. |
| 1.3.6.1.4.1.2272.1.202.1.1.2.4.19.1.6 | ColumnrcPrFilterAceProtoIcmpMsgTypeRowStatus | read-write | current | Create/delete operations for this entry. |
| 1.3.6.1.4.1.2272.1.202.1.1.2.4.20 | TablercPrFilterAceProtoTcpFlagsTable | not-accessible | current | A table of Aces to store TCP Flags information of each Ace in context of its parent Acl. |
| 1.3.6.1.4.1.2272.1.202.1.1.2.4.20.1 | RowrcPrFilterAceProtoTcpFlagsEntry | not-accessible | current | One entry holding Ace Protocol TCP flags information. An Ace is a member of one Acl. |
| 1.3.6.1.4.1.2272.1.202.1.1.2.4.20.1.1 | ColumnrcPrFilterAceProtoTcpFlagsAclId | read-only | current | An index to the rcPrFilterAceProtoTcpFlagsEntry, a unique identifier for Acl entry in the range of Table Size. |
| 1.3.6.1.4.1.2272.1.202.1.1.2.4.20.1.2 | ColumnrcPrFilterAceProtoTcpFlagsAceId | read-only | current | An index to the rcPrFilterAceProtoTcpFlagsEntry, a unique identifier for Ace entry in the range of Table Size. |
| 1.3.6.1.4.1.2272.1.202.1.1.2.4.20.1.3 | ColumnrcPrFilterAceProtoTcpFlagsList | read-write | current | One or a list of Tcp flags to be matched. Need to provide strings, number of protocol header types (pre-defined values plus user-defined headers). Valid range … |
| 1.3.6.1.4.1.2272.1.202.1.1.2.4.20.1.4 | ColumnrcPrFilterAceProtoTcpFlagsCount | read-write | current | Count to store the number of discrete ranges entered for the TCP flags. |
| 1.3.6.1.4.1.2272.1.202.1.1.2.4.20.1.5 | ColumnrcPrFilterAceProtoTcpFlagsOper | read-write | current | Operator for Ace Protocol TcpFlags. |
| 1.3.6.1.4.1.2272.1.202.1.1.2.4.20.1.6 | ColumnrcPrFilterAceProtoTcpFlagsRowStatus | read-write | current | Create/delete operations for this entry. |
| 1.3.6.1.4.1.2272.1.202.1.1.2.4.20.1.7 | ColumnrcPrFilterAceProtoTcpFlagsOperMask | read-write | current | The mask value in hex which can be set for the rcPrFilterAceProtoTcpFlagsOper when the option selected is mask. It will be set 0x0 when object rcPrFilterAcePro… |
| 1.3.6.1.4.1.2272.1.202.1.1.2.4.21 | TablercPrFilterAcePattern1Table | not-accessible | current | A table of pattern fields for Aces to manage the settings for each user defined field. |
| 1.3.6.1.4.1.2272.1.202.1.1.2.4.21.1 | RowrcPrFilterAcePattern1Entry | not-accessible | current | One Ace entry holding Ace User Defined Pattern information. Ace is a member of one Acl. |
| 1.3.6.1.4.1.2272.1.202.1.1.2.4.21.1.1 | ColumnrcPrFilterAcePattern1AclId | read-only | current | An index to the AcePatternEntry, a unique identifier for Acl entry in the range of Table Size. |
| 1.3.6.1.4.1.2272.1.202.1.1.2.4.21.1.2 | ColumnrcPrFilterAcePattern1AceId | read-only | current | An index to the AcePatternEntry, a unique identifier for Acl entry in the range of Table Size. |
| 1.3.6.1.4.1.2272.1.202.1.1.2.4.21.1.3 | ColumnrcPrFilterAcePattern1Name | read-write | current | A descriptive name chosen by the administrator for the Ace Pattern Entry. |
| 1.3.6.1.4.1.2272.1.202.1.1.2.4.21.1.4 | ColumnrcPrFilterAcePattern1Value | read-write | current | Set the pattern value as numeric string. The numeric value of each byte is encoded in one octet of the string. Unused bytes are left at the trailing end of str… |
| 1.3.6.1.4.1.2272.1.202.1.1.2.4.21.1.5 | ColumnrcPrFilterAcePattern1Oper | read-write | current | Operators for Ace Pattern. |
| 1.3.6.1.4.1.2272.1.202.1.1.2.4.21.1.6 | ColumnrcPrFilterAcePattern1RowStatus | read-write | current | Create/delete operations for this entry. |
| 1.3.6.1.4.1.2272.1.202.1.1.2.4.22 | TablercPrFilterAcePattern2Table | not-accessible | current | A table of pattern fields for Aces to manage the settings for each user defined field. |
| 1.3.6.1.4.1.2272.1.202.1.1.2.4.22.1 | RowrcPrFilterAcePattern2Entry | not-accessible | current | One Ace entry holding Ace User Defined Pattern information. Ace is a member of one Acl. |
| 1.3.6.1.4.1.2272.1.202.1.1.2.4.22.1.1 | ColumnrcPrFilterAcePattern2AclId | read-only | current | An index to the AcePatternEntry, a unique identifier for Acl entry in the range of Table Size. |
| 1.3.6.1.4.1.2272.1.202.1.1.2.4.22.1.2 | ColumnrcPrFilterAcePattern2AceId | read-only | current | An index to the AcePatternEntry, a unique identifier for Acl entry in the range of Table Size. |
| 1.3.6.1.4.1.2272.1.202.1.1.2.4.22.1.3 | ColumnrcPrFilterAcePattern2Name | read-write | current | A descriptive name chosen by the administrator for the Ace Pattern Entry. |
| 1.3.6.1.4.1.2272.1.202.1.1.2.4.22.1.4 | ColumnrcPrFilterAcePattern2Value | read-write | current | Set the pattern value as numeric string. The numeric value of each byte is encoded in one octet of the string. Unused bytes are left at the trailing end of str… |
| 1.3.6.1.4.1.2272.1.202.1.1.2.4.22.1.5 | ColumnrcPrFilterAcePattern2Oper | read-write | current | Operators for Ace Pattern. |
| 1.3.6.1.4.1.2272.1.202.1.1.2.4.22.1.6 | ColumnrcPrFilterAcePattern2RowStatus | read-write | current | Create/delete operations for this entry. |
| 1.3.6.1.4.1.2272.1.202.1.1.2.4.23 | TablercPrFilterAcePattern3Table | not-accessible | current | A table of pattern fields for Aces to manage the settings for each user defined field. |
| 1.3.6.1.4.1.2272.1.202.1.1.2.4.23.1 | RowrcPrFilterAcePattern3Entry | not-accessible | current | One Ace entry holding Ace User Defined Pattern information. Ace is a member of one Acl. |
| 1.3.6.1.4.1.2272.1.202.1.1.2.4.23.1.1 | ColumnrcPrFilterAcePattern3AclId | read-only | current | An index to the AcePatternEntry, a unique identifier for Acl entry in the range of Table Size. |
| 1.3.6.1.4.1.2272.1.202.1.1.2.4.23.1.2 | ColumnrcPrFilterAcePattern3AceId | read-only | current | An index to the AcePatternEntry, a unique identifier for Acl entry in the range of Table Size. |
| 1.3.6.1.4.1.2272.1.202.1.1.2.4.23.1.3 | ColumnrcPrFilterAcePattern3Name | read-write | current | A descriptive name chosen by the administrator for the Ace Pattern Entry. |
| 1.3.6.1.4.1.2272.1.202.1.1.2.4.23.1.4 | ColumnrcPrFilterAcePattern3Value | read-write | current | Set the pattern value as numeric string. The numeric value of each byte is encoded in one octet of the string. Unused bytes are left at the trailing end of str… |
| 1.3.6.1.4.1.2272.1.202.1.1.2.4.23.1.5 | ColumnrcPrFilterAcePattern3Oper | read-write | current | Operators for Ace Pattern. |
| 1.3.6.1.4.1.2272.1.202.1.1.2.4.23.1.6 | ColumnrcPrFilterAcePattern3RowStatus | read-write | current | Create/delete operations for this entry. |
| 1.3.6.1.4.1.2272.1.202.1.1.2.4.24 | TablercPrFilterAceStatsTable | not-accessible | current | A table of ACE Statistics Entries to store per-ACE-per-Port Statistics |
| 1.3.6.1.4.1.2272.1.202.1.1.2.4.24.1 | RowrcPrFilterAceStatsEntry | not-accessible | current | Ace Statistics entry holding per-ACE-per-port Statistics |
| 1.3.6.1.4.1.2272.1.202.1.1.2.4.24.1.1 | ColumnrcPrFilterAceStatsAclId | read-only | current | An index to the AceStatsEntry, a unique identifier for Acl entry in the range of Table Size. |
| 1.3.6.1.4.1.2272.1.202.1.1.2.4.24.1.2 | ColumnrcPrFilterAceStatsAceId | read-only | current | An index to the AceStatsEntry, a unique identifier for ACE entry in the range of Table Size. |
| 1.3.6.1.4.1.2272.1.202.1.1.2.4.24.1.3 | ColumnrcPrFilterAceStatsPortId | read-only | current | An index to the AceStatsEntry, a unique identifier of the portId. This object is not being used in VSP 9000. It should be alway in VVSP 9000 |
| 1.3.6.1.4.1.2272.1.202.1.1.2.4.24.1.4 | ColumnrcPrFilterAceStatsMatchCountPkts | read-only | current | Count of packets that match this particular Ace on this particular port. |
| 1.3.6.1.4.1.2272.1.202.1.1.2.4.24.1.5 | ColumnrcPrFilterAceStatsMatchCountOctets | read-only | current | Byte count of traffic that match this particular Ace on this particular port |
| 1.3.6.1.4.1.2272.1.202.1.1.2.4.24.1.6 | ColumnrcPrFilterAceStatsClear | read-write | current | Clear Per-ACE-Per-Port statistics. |
| 1.3.6.1.4.1.2272.1.202.1.1.2.4.25 | TablercPrFilterAceEthShowTable | not-accessible | current | A table of Aces to store Ethernet Header information of each Ace in context of its parent Acl. |
| 1.3.6.1.4.1.2272.1.202.1.1.2.4.25.1 | RowrcPrFilterAceEthShowEntry | not-accessible | current | One Ace entry holding Ace Ethernet information. Ace is a member of one Acl. |
| 1.3.6.1.4.1.2272.1.202.1.1.2.4.25.1.1 | ColumnrcPrFilterAceEthShowAclId | read-only | current | An index to the AceEthernetEntry, a unique identifier for Acl entry in the range of Table Size. |
| 1.3.6.1.4.1.2272.1.202.1.1.2.4.25.1.2 | ColumnrcPrFilterAceEthShowAceId | read-only | current | An index to the AceEthernetEntry, a unique identifier for Acl entry in the range of Table Size. |
| 1.3.6.1.4.1.2272.1.202.1.1.2.4.25.1.3 | ColumnrcPrFilterAceEthShowSrcAddrList | read-only | current | The list of ethernet source address to match. |
| 1.3.6.1.4.1.2272.1.202.1.1.2.4.25.1.4 | ColumnrcPrFilterAceEthShowSrcAddrOper | read-only | current | Operators for Ace Ethernet Source MAC Address. |
| 1.3.6.1.4.1.2272.1.202.1.1.2.4.25.1.5 | ColumnrcPrFilterAceEthShowDstAddrList | read-only | current | List of ethernet destination address to match. |
| 1.3.6.1.4.1.2272.1.202.1.1.2.4.25.1.6 | ColumnrcPrFilterAceEthShowDstAddrOper | read-only | current | Operators for Ace Ethernet Destination MAC Address. |
| 1.3.6.1.4.1.2272.1.202.1.1.2.4.25.1.7 | ColumnrcPrFilterAceEthShowEtherTypeList | read-only | current | EtherType value from ethernet header. For example ARP uses 0x0806, IP uses 0x0800. The platform support determines the behavior for 802.1Q/p tagged packets. Th… |
| 1.3.6.1.4.1.2272.1.202.1.1.2.4.25.1.8 | ColumnrcPrFilterAceEthShowEtherTypeOper | read-only | current | Ethernet Type Operators. |
| 1.3.6.1.4.1.2272.1.202.1.1.2.4.25.1.9 | ColumnrcPrFilterAceEthShowVlanTagPrio | read-only | current | Priority bits (3-bit field) from the 802.1Q/p tag. |
| 1.3.6.1.4.1.2272.1.202.1.1.2.4.25.1.10 | ColumnrcPrFilterAceEthShowVlanTagPrioOper | read-only | current | Operators for Ace Ethernet Vlan Tag Priority. |
| 1.3.6.1.4.1.2272.1.202.1.1.2.4.25.1.11 | ColumnrcPrFilterAceEthShowPort | read-only | current | Port Number or Port List to match on. |
| 1.3.6.1.4.1.2272.1.202.1.1.2.4.25.1.12 | ColumnrcPrFilterAceEthShowPortOper | read-only | current | Operator for Ace Ethernet Port. |
| 1.3.6.1.4.1.2272.1.202.1.1.2.4.25.1.13 | ColumnrcPrFilterAceEthShowVlanIdList | read-only | current | Vlan Id to match on. This is a ERS 8600 supported object. VSP9000 uses rcPrFilterAceEthShowVlanId instead |
| 1.3.6.1.4.1.2272.1.202.1.1.2.4.25.1.14 | ColumnrcPrFilterAceEthShowVlanIdOper | read-only | current | Operator for Ace Ethernet VlanId. |
| 1.3.6.1.4.1.2272.1.202.1.1.2.4.25.1.15 | ColumnrcPrFilterAceEthShowSrcAddrOperMask | read-only | current | The mask value in hex which can be set for the rcPrFilterAceEthSrcAddrOper when the option selected is mask. It will be empty or set to 000000000000 whenrcPrFi… |
| 1.3.6.1.4.1.2272.1.202.1.1.2.4.25.1.16 | ColumnrcPrFilterAceEthShowDstAddrOperMask | read-only | current | The mask value in hex which can be set for the rcPrFilterAceEthDstAddrOper when the option selected is mask. It will be empty or set to 000000000000 whenrcPrFi… |
| 1.3.6.1.4.1.2272.1.202.1.1.2.4.25.1.17 | ColumnrcPrFilterAceEthShowVlanTagPrioOperMask | read-only | current | The mask value in hex which can be set for the rcPrFilterAceEthVlanTagPrioOper when the option selected is masked. This object is applicable for VSP9000. Not f… |
| 1.3.6.1.4.1.2272.1.202.1.1.2.4.25.1.18 | ColumnrcPrFilterAceEthShowVlanIdOperMask | read-only | current | The mask value in hex which can be set for the rcPrFilterAceEthVlanIdOper when the option selected is mask. This object is used with rcPrFilterAceEthVlanIdVlan… |
| 1.3.6.1.4.1.2272.1.202.1.1.2.4.25.1.19 | ColumnrcPrFilterAceEthShowVlanId | read-only | current | Vlan Id to match on. VSP9000 use this object with object rcPrFilterAceEthVlanIdOperMask to replace the rcPrFilterAceEthVlanIdVlanIdList |
| 1.3.6.1.4.1.2272.1.202.1.1.2.4.26 | TablercPrFilterAceIpShowTable | not-accessible | current | A table of Aces to store IP Header information of each Ace in context of its parent Acl. |
| 1.3.6.1.4.1.2272.1.202.1.1.2.4.26.1 | RowrcPrFilterAceIpShowEntry | not-accessible | current | One Ace entry holding Ace IP information. Ace is a member of one Acl. |
| 1.3.6.1.4.1.2272.1.202.1.1.2.4.26.1.1 | ColumnrcPrFilterAceIpShowAclId | read-only | current | An index to the AceIpShowEntry, a unique identifier for Acl entry in the range of Table Size. |
| 1.3.6.1.4.1.2272.1.202.1.1.2.4.26.1.2 | ColumnrcPrFilterAceIpShowAceId | read-only | current | An index to the AceIpShowEntry, a unique identifier for Acl entry in the range of Table Size. |
| 1.3.6.1.4.1.2272.1.202.1.1.2.4.26.1.3 | ColumnrcPrFilterAceIpShowSrcAddrList | read-only | current | The list of ip source address to match from IP header. Not applicable to VSP9000 |
| 1.3.6.1.4.1.2272.1.202.1.1.2.4.26.1.4 | ColumnrcPrFilterAceIpShowSrcAddrOper | read-only | current | Operators for Ace Ip Source Address. |
| 1.3.6.1.4.1.2272.1.202.1.1.2.4.26.1.5 | ColumnrcPrFilterAceIpShowDstAddrList | read-only | current | The list of ip dst address to match from IP header. Not applicable to VSP9000 |
| 1.3.6.1.4.1.2272.1.202.1.1.2.4.26.1.6 | ColumnrcPrFilterAceIpShowDstAddrOper | read-only | current | Operators for Ace Ip Destination Address. |
| 1.3.6.1.4.1.2272.1.202.1.1.2.4.26.1.7 | ColumnrcPrFilterAceIpShowDscpList | read-only | current | The 6-bit DSCP field from the ToS byte in Ipv4 header encodes the PHB information per DiffServ standards (Refer to DiffServ RFCs 2474). Set the Dscp to PHB (li… |
| 1.3.6.1.4.1.2272.1.202.1.1.2.4.26.1.8 | ColumnrcPrFilterAceIpShowDscpOper | read-only | current | Operators for Ace Ip Dscp. |
| 1.3.6.1.4.1.2272.1.202.1.1.2.4.26.1.9 | ColumnrcPrFilterAceIpShowProtoList | read-only | current | Ip protocol Type from the ip header to be matched. Valid Ip protocol range is 0..255. Few of the Protocol Types are enumerated above. In case the desired proto… |
| 1.3.6.1.4.1.2272.1.202.1.1.2.4.26.1.10 | ColumnrcPrFilterAceIpShowProtoOper | read-only | current | Operators for Ace Ip Protocols. |
| 1.3.6.1.4.1.2272.1.202.1.1.2.4.26.1.11 | ColumnrcPrFilterAceIpShowOptions | read-only | current | Ip options to be matched from the IP Header. |
| 1.3.6.1.4.1.2272.1.202.1.1.2.4.26.1.12 | ColumnrcPrFilterAceIpShowOptionsOper | read-only | current | Logical Operator - only 'any' is valid at present. |
| 1.3.6.1.4.1.2272.1.202.1.1.2.4.26.1.13 | ColumnrcPrFilterAceIpShowFragmentation | read-only | current | Ip Fragmentation bits to be matched from the IP Header. |
| 1.3.6.1.4.1.2272.1.202.1.1.2.4.26.1.14 | ColumnrcPrFilterAceIpShowFragOper | read-only | current | Operator for Ip fragmentation. |
| 1.3.6.1.4.1.2272.1.202.1.1.2.4.26.1.15 | ColumnrcPrFilterAceIpShowSrcAddrIpAddr | read-only | current | IP Source Address to match from IP header. This object is defined and used to replace the rcPrFilterAceIpSrcAddrList by VSP 9000 |
| 1.3.6.1.4.1.2272.1.202.1.1.2.4.26.1.16 | ColumnrcPrFilterAceIpShowSrcAddrOperMaskRange | read-only | current | The IP Mask value or High IP address based on object rcPrFilterAceIpSrcAddrOper mask/range option is selected. |
| 1.3.6.1.4.1.2272.1.202.1.1.2.4.26.1.17 | ColumnrcPrFilterAceIpShowDstAddrIpAddr | read-only | current | IP Source Address to match from IP header. This object is defined and used to replace the rcPrFilterAceIpSrcAddrList by VSP 9000 |
| 1.3.6.1.4.1.2272.1.202.1.1.2.4.26.1.18 | ColumnrcPrFilterAceIpShowDstAddrOperMaskRange | read-only | current | The IP mask value or Hi Ip address based on object rcPrFilterAceIpDstAddrOper mask/range option is selected. |
| 1.3.6.1.4.1.2272.1.202.1.1.2.4.26.1.19 | ColumnrcPrFilterAceIpShowDscpOperMask | read-only | current | The mask value in hex which can be set for the rcPrFilterAceIpDscpOper when the option selected is mask. It will be set to 0 or be used when rcPrFilterAceIpDsc… |
| 1.3.6.1.4.1.2272.1.202.1.1.2.4.27 | TablercPrFilterAceProtoShowTable | not-accessible | current | A table of Aces to store Protocol Header information of each Ace in context of its parent Acl. |
| 1.3.6.1.4.1.2272.1.202.1.1.2.4.27.1 | RowrcPrFilterAceProtoShowEntry | not-accessible | current | One Ace entry holding Ace Ethernet information. Ace is a member of one Acl. |
| 1.3.6.1.4.1.2272.1.202.1.1.2.4.27.1.1 | ColumnrcPrFilterAceProtoShowAclId | read-only | current | An index to the AceProtoShowEntry, a unique identifier for Acl entry in the range of Table Size. |
| 1.3.6.1.4.1.2272.1.202.1.1.2.4.27.1.2 | ColumnrcPrFilterAceProtoShowAceId | read-only | current | An index to the AceProtoShowEntry, a unique identifier for Ace entry in the range of Table Size. |
| 1.3.6.1.4.1.2272.1.202.1.1.2.4.27.1.3 | ColumnrcPrFilterAceProtoShowTcpSrcPort | read-only | current | Port Number or Port List to match on. Not applicable to VSP9000 |
| 1.3.6.1.4.1.2272.1.202.1.1.2.4.27.1.4 | ColumnrcPrFilterAceProtoShowTcpSrcPortOper | read-only | current | Operator for Ace Protocol TcpSrcPort. Not applicable to VSP9000 |
| 1.3.6.1.4.1.2272.1.202.1.1.2.4.27.1.5 | ColumnrcPrFilterAceProtoShowUdpSrcPort | read-only | current | Port Number or Port List to match on. Not applicable to VSP9000 |
| 1.3.6.1.4.1.2272.1.202.1.1.2.4.27.1.6 | ColumnrcPrFilterAceProtoShowUdpSrcPortOper | read-only | current | Operator for Ace Protocol UdpSrcPort. Not applicable to VSP9000 |
| 1.3.6.1.4.1.2272.1.202.1.1.2.4.27.1.7 | ColumnrcPrFilterAceProtoShowTcpDstPort | read-only | current | Port Number or Port List to match on. Not applicable to VSP9000 |
| 1.3.6.1.4.1.2272.1.202.1.1.2.4.27.1.8 | ColumnrcPrFilterAceProtoShowTcpDstPortOper | read-only | current | Operator for Ace Protocol TcpDstPort. Not applicable to VSP9000 |
| 1.3.6.1.4.1.2272.1.202.1.1.2.4.27.1.9 | ColumnrcPrFilterAceProtoShowUdpDstPort | read-only | current | Port Number or Port List to match on. Not applicable to VSP9000 |
| 1.3.6.1.4.1.2272.1.202.1.1.2.4.27.1.10 | ColumnrcPrFilterAceProtoShowUdpDstPortOper | read-only | current | Operator for Ace Protocol UdpDstPort. Not applicable to VSP9000 |
| 1.3.6.1.4.1.2272.1.202.1.1.2.4.27.1.11 | ColumnrcPrFilterAceProtoShowIcmpMsgTypeList | read-only | current | One or a list of Icmp messages to be matched. Need to provide strings, number of protocol header types (pre-defined values plus user-defined headers). Valid ra… |
| 1.3.6.1.4.1.2272.1.202.1.1.2.4.27.1.12 | ColumnrcPrFilterAceProtoShowIcmpMsgTypeOper | read-only | current | Operator for Ace Protocol IcmpMsgTypes. |
| 1.3.6.1.4.1.2272.1.202.1.1.2.4.27.1.13 | ColumnrcPrFilterAceProtoShowTcpFlagsList | read-only | current | One or a list of Tcp flags to be matched. Need to provide strings, number of protocol header types (pre-defined values plus user-defined headers). Valid range … |
| 1.3.6.1.4.1.2272.1.202.1.1.2.4.27.1.14 | ColumnrcPrFilterAceProtoShowTcpFlagsOper | read-only | current | Operator for Ace Protocol TcpFlags. |
| 1.3.6.1.4.1.2272.1.202.1.1.2.4.27.1.15 | ColumnrcPrFilterAceProtoShowSrcPort | read-only | current | Port Number or Port List to match on. |
| 1.3.6.1.4.1.2272.1.202.1.1.2.4.27.1.16 | ColumnrcPrFilterAceProtoShowSrcPortOper | read-only | current | Operator for Ace Protocol SrcPort. |
| 1.3.6.1.4.1.2272.1.202.1.1.2.4.27.1.17 | ColumnrcPrFilterAceProtoShowSrcPortOperMaskRange | read-only | current | The value should be displayed in hex when rcPrFilterAceProtoSrcPortOper is set to 'mask'. This object will be used as a Range high value when rcPrFilterAceProt… |
| 1.3.6.1.4.1.2272.1.202.1.1.2.4.27.1.18 | ColumnrcPrFilterAceProtoShowDstPort | read-only | current | Port Number or Port List to match on. |
| 1.3.6.1.4.1.2272.1.202.1.1.2.4.27.1.19 | ColumnrcPrFilterAceProtoShowDstPortOper | read-only | current | Operator for Ace Protocol DstPort. |
| 1.3.6.1.4.1.2272.1.202.1.1.2.4.27.1.20 | ColumnrcPrFilterAceProtoShowDstPortOperMaskRange | read-only | current | The value should be displayed in hex when rcPrFilterAceProtoDstPortOper is set to 'mask'. This object will be used as a Range high value when rcPrFilterAceProt… |
| 1.3.6.1.4.1.2272.1.202.1.1.2.4.27.1.21 | ColumnrcPrFilterAceProtoShowTcpFlagsOperMask | read-only | current | The mask value in hex which can be set for the rcPrFilterAceProtoTcpFlagsOper when the option selected is mask. It will be set 0x0 when object rcPrFilterAcePro… |
| 1.3.6.1.4.1.2272.1.202.1.1.2.4.27.1.22 | ColumnrcPrFilterAceProtoShowRoutingTypeType | read-only | current | Value of Protocol routing-type. |
| 1.3.6.1.4.1.2272.1.202.1.1.2.4.27.1.23 | ColumnrcPrFilterAceProtoShowRoutingTypeOper | read-only | current | Operator for Ace Protocol RoutingType. |
| 1.3.6.1.4.1.2272.1.202.1.1.2.4.27.1.24 | ColumnrcPrFilterAceProtoShowIcmpv6MsgTypeList | read-only | current | One or a list of ICMPv6 messages to be matched. Need to provide strings, number of protocol header types (pre-defined values plus user-defined headers). Valid … |
| 1.3.6.1.4.1.2272.1.202.1.1.2.4.27.1.25 | ColumnrcPrFilterAceProtoShowIcmpv6MsgTypeOper | read-only | current | Operator for Ace Protocol Icmpv6MsgTypes. |
| 1.3.6.1.4.1.2272.1.202.1.1.2.4.28 | TablercPrFilterAcePatternShowTable | not-accessible | current | A table of Aces to store Pattern 1, 2, 3 Header information of each Ace in context of its parent Acl. |
| 1.3.6.1.4.1.2272.1.202.1.1.2.4.28.1 | RowrcPrFilterAcePatternShowEntry | not-accessible | current | One Ace entry holding Ace Pattern 1, 2, 3 information. Ace is a member of one Acl. |
| 1.3.6.1.4.1.2272.1.202.1.1.2.4.28.1.1 | ColumnrcPrFilterAcePatternShowAclId | read-only | current | An index to the AcePatternEntry, a unique identifier for Acl entry in the range of Table Size. |
| 1.3.6.1.4.1.2272.1.202.1.1.2.4.28.1.2 | ColumnrcPrFilterAcePatternShowAceId | read-only | current | An index to the AcePatternEntry, a unique identifier for Acl entry in the range of Table Size. |
| 1.3.6.1.4.1.2272.1.202.1.1.2.4.28.1.3 | ColumnrcPrFilterAcePatternShowPattern1Name | read-only | current | A descriptive name chosen by the administrator for the Ace Pattern Entry. |
| 1.3.6.1.4.1.2272.1.202.1.1.2.4.28.1.4 | ColumnrcPrFilterAcePatternShowPattern1Value | read-only | current | Set the pattern value as numeric string. The numeric value of each byte is encoded in one octet of the string. Unused bytes are left at the trailing end of str… |
| 1.3.6.1.4.1.2272.1.202.1.1.2.4.28.1.5 | ColumnrcPrFilterAcePatternShowPattern1Oper | read-only | current | Operators for Ace Pattern. |
| 1.3.6.1.4.1.2272.1.202.1.1.2.4.28.1.6 | ColumnrcPrFilterAcePatternShowPattern2Name | read-only | current | A descriptive name chosen by the administrator for the Ace Pattern Entry. |
| 1.3.6.1.4.1.2272.1.202.1.1.2.4.28.1.7 | ColumnrcPrFilterAcePatternShowPattern2Value | read-only | current | Set the pattern value as numeric string. The numeric value of each byte is encoded in one octet of the string. Unused bytes are left at the trailing end of str… |
| 1.3.6.1.4.1.2272.1.202.1.1.2.4.28.1.8 | ColumnrcPrFilterAcePatternShowPattern2Oper | read-only | current | Operators for Ace Pattern. |
| 1.3.6.1.4.1.2272.1.202.1.1.2.4.28.1.9 | ColumnrcPrFilterAcePatternShowPattern3Name | read-only | current | A descriptive name chosen by the administrator for the Ace Pattern Entry. |
| 1.3.6.1.4.1.2272.1.202.1.1.2.4.28.1.10 | ColumnrcPrFilterAcePatternShowPattern3Value | read-only | current | Set the pattern value as numeric string. The numeric value of each byte is encoded in one octet of the string. Unused bytes are left at the trailing end of str… |
| 1.3.6.1.4.1.2272.1.202.1.1.2.4.28.1.11 | ColumnrcPrFilterAcePatternShowPattern3Oper | read-only | current | Operators for Ace Pattern. |
| 1.3.6.1.4.1.2272.1.202.1.1.2.4.29 | TablercPrFilterAceIpv6SrcAddrTable | not-accessible | current | A table of Aces to store IPv6 Source Address Header information of each Ace in context of its parent Acl. |
| 1.3.6.1.4.1.2272.1.202.1.1.2.4.29.1 | RowrcPrFilterAceIpv6SrcAddrEntry | not-accessible | current | One Ace entry holding Ace IPv6 Source Address Header information. An Ace is a member of one Acl. |
| 1.3.6.1.4.1.2272.1.202.1.1.2.4.29.1.1 | ColumnrcPrFilterAceIpv6SrcAddrAclId | read-only | current | An index to the AceIpv6SrcAddrEntry, a unique identifier for Acl entry in the range of Table Size. |
| 1.3.6.1.4.1.2272.1.202.1.1.2.4.29.1.2 | ColumnrcPrFilterAceIpv6SrcAddrAceId | read-only | current | An index to the AceIpv6SrcAddrEntry, a unique identifier for Acl entry in the range of Table Size. |
| 1.3.6.1.4.1.2272.1.202.1.1.2.4.29.1.3 | ColumnrcPrFilterAceIpv6SrcAddrList | read-write | current | The list of ipv6 source address to match from IPv6 header. |
| 1.3.6.1.4.1.2272.1.202.1.1.2.4.29.1.4 | ColumnrcPrFilterAceIpv6SrcAddrListCount | read-write | obsolete | Count to store the number of discrete ranges entered for the ipv6 src address. |
| 1.3.6.1.4.1.2272.1.202.1.1.2.4.29.1.5 | ColumnrcPrFilterAceIpv6SrcAddrOper | read-write | current | Operators for Ace Ipv6 Source Address. |
| 1.3.6.1.4.1.2272.1.202.1.1.2.4.29.1.6 | ColumnrcPrFilterAceIpv6SrcAddrRowStatus | read-create | current | Create/delete operations for this entry. |
| 1.3.6.1.4.1.2272.1.202.1.1.2.4.29.1.7 | ColumnrcPrFilterAceIpv6SrcAddrOperMask | read-write | current | The ipv6 mask value when rcPrFilterAceIpv6SrcAddrOper mask is selected. |
| 1.3.6.1.4.1.2272.1.202.1.1.2.4.30 | TablercPrFilterAceIpv6DstAddrTable | not-accessible | current | A table of Aces to store IPv6 Destination Address Header information of each Ace in context of its parent Acl. |
| 1.3.6.1.4.1.2272.1.202.1.1.2.4.30.1 | RowrcPrFilterAceIpv6DstAddrEntry | not-accessible | current | One Ace entry holding Ace IPv6 Destination Address Header information. An Ace is a member of one Acl. |
| 1.3.6.1.4.1.2272.1.202.1.1.2.4.30.1.1 | ColumnrcPrFilterAceIpv6DstAddrAclId | read-only | current | An index to the AceIpv6DstAddrEntry, a unique identifier for Acl entry in the range of Table Size. |
| 1.3.6.1.4.1.2272.1.202.1.1.2.4.30.1.2 | ColumnrcPrFilterAceIpv6DstAddrAceId | read-only | current | An index to the AceIpv6DstAddrEntry, a unique identifier for Acl entry in the range of Table Size. |
| 1.3.6.1.4.1.2272.1.202.1.1.2.4.30.1.3 | ColumnrcPrFilterAceIpv6DstAddrList | read-write | current | The list of ipv6 dst address to match from IPv6 header. |
| 1.3.6.1.4.1.2272.1.202.1.1.2.4.30.1.4 | ColumnrcPrFilterAceIpv6DstAddrListCount | read-write | obsolete | Count to store the number of discrete ranges entered for the IPv6 Destination Address. |
| 1.3.6.1.4.1.2272.1.202.1.1.2.4.30.1.5 | ColumnrcPrFilterAceIpv6DstAddrOper | read-write | current | Operators for Ace IPv6 Destination Address. |
| 1.3.6.1.4.1.2272.1.202.1.1.2.4.30.1.6 | ColumnrcPrFilterAceIpv6DstAddrRowStatus | read-create | current | Create/delete operations for this entry. |
| 1.3.6.1.4.1.2272.1.202.1.1.2.4.30.1.7 | ColumnrcPrFilterAceIpv6DstAddrOperMask | read-write | current | The ipv6 mask value when rcPrFilterAceIpv6DstAddrOper mask is selected. |
| 1.3.6.1.4.1.2272.1.202.1.1.2.4.31 | TablercPrFilterAceIpv6NextHdrTable | not-accessible | current | A table of Aces to store IPv6 Next header Header information of each Ace in context of its parent Acl. |
| 1.3.6.1.4.1.2272.1.202.1.1.2.4.31.1 | RowrcPrFilterAceIpv6NextHdrEntry | not-accessible | current | One Ace entry holding Ace IPv6 Next header information. An Ace is a member of one Acl. |
| 1.3.6.1.4.1.2272.1.202.1.1.2.4.31.1.1 | ColumnrcPrFilterAceIpv6NextHdrAclId | read-only | current | An index to the AceIpv6NextHdrEntry, a unique identifier for Acl entry in the range of Table Size. |
| 1.3.6.1.4.1.2272.1.202.1.1.2.4.31.1.2 | ColumnrcPrFilterAceIpv6NextHdrAceId | read-only | current | An index to the AceIpv6NextHdrEntry, a unique identifier for Acl entry in the range of Table Size. |
| 1.3.6.1.4.1.2272.1.202.1.1.2.4.31.1.3 | ColumnrcPrFilterAceIpv6NextHdrNextHdr | read-write | current | The ipv6 next header to look for. |
| 1.3.6.1.4.1.2272.1.202.1.1.2.4.31.1.4 | ColumnrcPrFilterAceIpv6NextHdrOper | read-write | current | Operators for Ace IPv6 Next header. |
| 1.3.6.1.4.1.2272.1.202.1.1.2.4.31.1.5 | ColumnrcPrFilterAceIpv6NextHdrRowStatus | read-create | current | Create/delete operations for this entry. |
| 1.3.6.1.4.1.2272.1.202.1.1.2.4.32 | TablercPrFilterAceIpv6ShowTable | not-accessible | current | A table of Aces to display ipv6 information of each Ace in context of its parent Acl. |
| 1.3.6.1.4.1.2272.1.202.1.1.2.4.32.1 | RowrcPrFilterAceIpv6ShowEntry | not-accessible | current | One Ace entry holding Ace ipv6 information. Ace is a member of one Acl. |
| 1.3.6.1.4.1.2272.1.202.1.1.2.4.32.1.1 | ColumnrcPrFilterAceIpv6ShowAclId | read-only | current | An index to the AceIpv6Entry, a unique identifier for Acl entry in the range of Table Size. |
| 1.3.6.1.4.1.2272.1.202.1.1.2.4.32.1.2 | ColumnrcPrFilterAceIpv6ShowAceId | read-only | current | An index to the AceIpv6Entry, a unique identifier for Acl entry in the range of Table Size. |
| 1.3.6.1.4.1.2272.1.202.1.1.2.4.32.1.3 | ColumnrcPrFilterAceIpv6ShowSrcAddrList | read-only | current | The list of Ipv6 source address to display. |
| 1.3.6.1.4.1.2272.1.202.1.1.2.4.32.1.4 | ColumnrcPrFilterAceIpv6ShowSrcAddrOper | read-only | current | Operators for Ace Ipv6 Source Address. |
| 1.3.6.1.4.1.2272.1.202.1.1.2.4.32.1.5 | ColumnrcPrFilterAceIpv6ShowDstAddrList | read-only | current | List of Ipv6 destination address to display. |
| 1.3.6.1.4.1.2272.1.202.1.1.2.4.32.1.6 | ColumnrcPrFilterAceIpv6ShowDstAddrOper | read-only | current | Operators for Ace Ipv6 Destination Address. |
| 1.3.6.1.4.1.2272.1.202.1.1.2.4.32.1.7 | ColumnrcPrFilterAceIpv6ShowNxtHdrNxtHdr | read-only | current | Ipv6 next hdr to display. |
| 1.3.6.1.4.1.2272.1.202.1.1.2.4.32.1.8 | ColumnrcPrFilterAceIpv6ShowNxtHdrOper | read-only | current | Operator for Ace Ipv6 next hdr. |
| 1.3.6.1.4.1.2272.1.202.1.1.2.4.32.1.9 | ColumnrcPrFilterAceIpv6ShowTrafficClsOper | read-only | current | Operator for Ace Ipv6 Traffic Class |
| 1.3.6.1.4.1.2272.1.202.1.1.2.4.32.1.10 | ColumnrcPrFilterAceIpv6ShowTrafficCls | read-only | current | Ipv6 traffic class value to display. |
| 1.3.6.1.4.1.2272.1.202.1.1.2.4.32.1.11 | ColumnrcPrFilterAceIpv6ShowSrcAddrMask | read-only | current | ipv6 SrcAddr Mask value to display. |
| 1.3.6.1.4.1.2272.1.202.1.1.2.4.32.1.12 | ColumnrcPrFilterAceIpv6ShowDstAddrMask | read-only | current | ipv6 DstAddr Mask value to display. |
| 1.3.6.1.4.1.2272.1.202.1.1.2.4.33 | TablercPrFilterAceProtoSrcPortTable | not-accessible | current | A table of Aces to store TCP/UDP Source Port information of each Ace in context of its parent Acl. |
| 1.3.6.1.4.1.2272.1.202.1.1.2.4.33.1 | RowrcPrFilterAceProtoSrcPortEntry | not-accessible | current | One entry holding Ace Protocol TCP/UDP Source Port information. An Ace is a member of one Acl. |
| 1.3.6.1.4.1.2272.1.202.1.1.2.4.33.1.1 | ColumnrcPrFilterAceProtoSrcPortAclId | read-only | current | An index to the AceProtoSrcPortEntry, a unique identifier for Acl entry in the range of Table Size. |
| 1.3.6.1.4.1.2272.1.202.1.1.2.4.33.1.2 | ColumnrcPrFilterAceProtoSrcPortAceId | read-only | current | An index to the AceProtoSrcPortEntry, a unique identifier for Ace entry in the range of Table Size. |
| 1.3.6.1.4.1.2272.1.202.1.1.2.4.33.1.3 | ColumnrcPrFilterAceProtoSrcPortPort | read-write | current | Port Number or Port List to match on. |
| 1.3.6.1.4.1.2272.1.202.1.1.2.4.33.1.4 | ColumnrcPrFilterAceProtoSrcPortCount | read-write | current | Count to store the number of discrete ranges entered for the TCP source port. |
| 1.3.6.1.4.1.2272.1.202.1.1.2.4.33.1.5 | ColumnrcPrFilterAceProtoSrcPortOper | read-write | current | Operator for Ace Protocol SrcPort. |
| 1.3.6.1.4.1.2272.1.202.1.1.2.4.33.1.6 | ColumnrcPrFilterAceProtoSrcPortRowStatus | read-write | current | Create/delete operations for this entry. |
| 1.3.6.1.4.1.2272.1.202.1.1.2.4.33.1.7 | ColumnrcPrFilterAceProtoSrcPortOperMaskRange | read-write | current | The value should be displayed in hex when rcPrFilterAceProtoSrcPortOper is set to 'mask'. This object will be used as a Range high value when rcPrFilterAceProt… |
| 1.3.6.1.4.1.2272.1.202.1.1.2.4.34 | TablercPrFilterAceProtoDstPortTable | not-accessible | current | A table of Aces to store TCP Dest Port information of each Ace in context of its parent Acl. |
| 1.3.6.1.4.1.2272.1.202.1.1.2.4.34.1 | RowrcPrFilterAceProtoDstPortEntry | not-accessible | current | One entry holding Ace Protocol TCP Dest Port information. An Ace is a member of one Acl. |
| 1.3.6.1.4.1.2272.1.202.1.1.2.4.34.1.1 | ColumnrcPrFilterAceProtoDstPortAclId | read-only | current | An index to the AceProtoDstPortEntry, a unique identifier for Acl entry in the range of Table Size. |
| 1.3.6.1.4.1.2272.1.202.1.1.2.4.34.1.2 | ColumnrcPrFilterAceProtoDstPortAceId | read-only | current | An index to the AceProtoDstPortEntry, a unique identifier for Ace entry in the range of Table Size. |
| 1.3.6.1.4.1.2272.1.202.1.1.2.4.34.1.3 | ColumnrcPrFilterAceProtoDstPortPort | read-write | current | Port Number or Port List to match on. |
| 1.3.6.1.4.1.2272.1.202.1.1.2.4.34.1.4 | ColumnrcPrFilterAceProtoDstPortCount | read-write | current | Count to store the number of discrete ranges entered for the TCP dest port. |
| 1.3.6.1.4.1.2272.1.202.1.1.2.4.34.1.5 | ColumnrcPrFilterAceProtoDstPortOper | read-write | current | Operator for Ace Protocol DstPort. |
| 1.3.6.1.4.1.2272.1.202.1.1.2.4.34.1.6 | ColumnrcPrFilterAceProtoDstPortRowStatus | read-write | current | Create/delete operations for this entry. |
| 1.3.6.1.4.1.2272.1.202.1.1.2.4.34.1.7 | ColumnrcPrFilterAceProtoDstPortOperMaskRange | read-write | current | The value should be displayed in hex when rcPrFilterAceProtoDstPortOper is set to 'mask'. This object will be used as a Range high value when rcPrFilterAceProt… |
| 1.3.6.1.4.1.2272.1.202.1.1.2.4.35 | TablercPrFilterAceProtoTcpOptionTable | not-accessible | current | A table of Aces to store TCP Option information of each Ace in context of its parent Acl. |
| 1.3.6.1.4.1.2272.1.202.1.1.2.4.35.1 | RowrcPrFilterAceProtoTcpOptionEntry | not-accessible | current | One entry holding Ace Protocol TCP option information. An Ace is a member of one Acl. |
| 1.3.6.1.4.1.2272.1.202.1.1.2.4.35.1.1 | ColumnrcPrFilterAceProtoTcpOptionAclId | read-only | current | An index to the rcPrFilterAceProtoTcpOptionEntry, a unique identifier for Acl entry in the range of Table Size. |
| 1.3.6.1.4.1.2272.1.202.1.1.2.4.35.1.2 | ColumnrcPrFilterAceProtoTcpOptionAceId | read-only | current | An index to the rcPrFilterAceProtoTcpOptionEntry, a unique identifier for Ace entry in the range of Table Size. |
| 1.3.6.1.4.1.2272.1.202.1.1.2.4.35.1.3 | ColumnrcPrFilterAceProtoTcpOptionHeader | read-write | current | TCP options to be matched from the TCP Header. 1 No-Operation 2 MaximumSegmentSize 3 WSOPT - Window Scale 4 SACK Permitted 5 SACK 8 TSOPT - Time Stamp Option 9… |
| 1.3.6.1.4.1.2272.1.202.1.1.2.4.35.1.4 | ColumnrcPrFilterAceProtoTcpOptionOper | read-write | current | Logical Operator - only 'any' is valid at present. |
| 1.3.6.1.4.1.2272.1.202.1.1.2.4.35.1.5 | ColumnrcPrFilterAceProtoTcpOptionRowStatus | read-write | current | Create/delete operations for this entry. |
| 1.3.6.1.4.1.2272.1.202.1.1.2.4.36 | TablercPrFilterAceIpv6TrafficClsTable | not-accessible | current | A table of Aces to store IPv6 Traffic Class Header information of each Ace in context of its parent Acl. |
| 1.3.6.1.4.1.2272.1.202.1.1.2.4.36.1 | RowrcPrFilterAceIpv6TrafficClsEntry | not-accessible | current | One Ace entry holding Ace IPv6 Traffic Class information. An Ace is a member of one Acl. |
| 1.3.6.1.4.1.2272.1.202.1.1.2.4.36.1.1 | ColumnrcPrFilterAceIpv6TrafficClsAclId | not-accessible | current | An index to the AceIpv6TrafficClsEntry, a unique identifier for Acl entry in the range of Table Size. |
| 1.3.6.1.4.1.2272.1.202.1.1.2.4.36.1.2 | ColumnrcPrFilterAceIpv6TrafficClsAceId | not-accessible | current | An index to the AceIpv6TrafficClsEntry, a unique identifier for Acl entry in the range of Table Size. |
| 1.3.6.1.4.1.2272.1.202.1.1.2.4.36.1.3 | ColumnrcPrFilterAceIpv6TrafficClsRowStatus | read-create | current | Create/delete operations for this entry. |
| 1.3.6.1.4.1.2272.1.202.1.1.2.4.36.1.4 | ColumnrcPrFilterAceIpv6TrafficClsOper | read-create | current | Operators for Ace IPv6 Traffic Class |
| 1.3.6.1.4.1.2272.1.202.1.1.2.4.36.1.5 | ColumnrcPrFilterAceIpv6TrafficClsTrafficCls | read-create | current | Ipv6 Traffic Class value |
| 1.3.6.1.4.1.2272.1.202.1.1.2.4.37 | TablercPrFilterAceProtoRoutingTypeTable | not-accessible | current | A table of Ace's to store IPv6 Routing header type information of each Ace in context of its parent Acl. |
| 1.3.6.1.4.1.2272.1.202.1.1.2.4.37.1 | RowrcPrFilterAceProtoRoutingTypeEntry | not-accessible | current | One Ace entry holding Ace IPv6 routing header type information. An Ace is a member of one Acl. |
| 1.3.6.1.4.1.2272.1.202.1.1.2.4.37.1.1 | ColumnrcPrFilterAceProtoRoutingTypeAclId | not-accessible | current | An index to the AceProtoRoutingTypeEntry, a unique identifier for Acl entry in the range of Table Size. |
| 1.3.6.1.4.1.2272.1.202.1.1.2.4.37.1.2 | ColumnrcPrFilterAceProtoRoutingTypeAceId | not-accessible | current | An index to the AceProtoRoutingTypeEntry, a unique identifier for Ace entry in the range of Table Size. |
| 1.3.6.1.4.1.2272.1.202.1.1.2.4.37.1.3 | ColumnrcPrFilterAceProtoRoutingTypeType | read-create | current | The ipv6 routing header type to look for. |
| 1.3.6.1.4.1.2272.1.202.1.1.2.4.37.1.4 | ColumnrcPrFilterAceProtoRoutingTypeOper | read-create | current | Operators for Ace IPv6 routing header type. |
| 1.3.6.1.4.1.2272.1.202.1.1.2.4.37.1.5 | ColumnrcPrFilterAceProtoRoutingTypeRowStatus | read-create | current | Create/delete operations for this entry. |
| 1.3.6.1.4.1.2272.1.202.1.1.2.4.38 | TablercPrFilterAceProtoIcmpv6MsgTypeTable | not-accessible | current | A table of Aces to store ICMPv6 message type information of each Ace in context of its parent Acl. |
| 1.3.6.1.4.1.2272.1.202.1.1.2.4.38.1 | RowrcPrFilterAceProtoIcmpv6MsgTypeEntry | not-accessible | current | One entry holding Ace ICMPv6 message type information. An Ace is a member of one Acl. |
| 1.3.6.1.4.1.2272.1.202.1.1.2.4.38.1.1 | ColumnrcPrFilterAceProtoIcmpv6MsgTypeAclId | not-accessible | current | An index to the AceProtoIcmpv6MsgTypeEntry, a unique identifier for Acl entry in the range of Table Size. |
| 1.3.6.1.4.1.2272.1.202.1.1.2.4.38.1.2 | ColumnrcPrFilterAceProtoIcmpv6MsgTypeAceId | not-accessible | current | An index to the AceProtoIcmpv6MsgTypeEntry, a unique identifier for Ace entry in the range of Table Size. |
| 1.3.6.1.4.1.2272.1.202.1.1.2.4.38.1.3 | ColumnrcPrFilterAceProtoIcmpv6MsgTypeList | read-create | current | One or a list of ICMPv6 messages to be matched. Need to provide strings, number of protocol header types (pre-defined values plus user-defined headers). Valid … |
| 1.3.6.1.4.1.2272.1.202.1.1.2.4.38.1.4 | ColumnrcPrFilterAceProtoIcmpv6MsgTypeCount | read-create | current | Count to store the number of discrete ranges entered for the ICMP message types. |
| 1.3.6.1.4.1.2272.1.202.1.1.2.4.38.1.5 | ColumnrcPrFilterAceProtoIcmpv6MsgTypeOper | read-create | current | Operator for Ace Protocol Icmpv6MsgTypes. |
| 1.3.6.1.4.1.2272.1.202.1.1.2.4.38.1.6 | ColumnrcPrFilterAceProtoIcmpv6MsgTypeRowStatus | read-create | current | Create/delete operations for this entry. |
| 1.3.6.1.4.1.2272.1.203 | NodercVrf | |||
| 1.3.6.1.4.1.2272.1.203.1 | NodercVrfMib | |||
| 1.3.6.1.4.1.2272.1.203.1.0 | NodercVrfNotifications | |||
| 1.3.6.1.4.1.2272.1.203.1.1 | NodercVrfObjects | |||
| 1.3.6.1.4.1.2272.1.203.1.1.1 | NodercVrfConfig | |||
| 1.3.6.1.4.1.2272.1.203.1.1.1.1 | NodercVrfConfigScalars | |||
| 1.3.6.1.4.1.2272.1.203.1.1.1.1.1 | ScalarrcVrfConfigNextAvailableVrfId | read-only | current | The next available Virtual Router Id (index). This object provides a hint for the rcVrfId value to use when administratively creating a new rcVrfConfigEntry. A… |
| 1.3.6.1.4.1.2272.1.203.1.1.1.2 | TablercVrfConfigTable | not-accessible | current | This table is for creating the new Virtual Routers. |
| 1.3.6.1.4.1.2272.1.203.1.1.1.2.1 | RowrcVrfConfigEntry | not-accessible | current | The entries in this table can be added/deleted using the rcVrfRowStatus. |
| 1.3.6.1.4.1.2272.1.203.1.1.1.2.1.1 | ColumnrcVrfId | not-accessible | current | The unique id of this virtual router instance. A Virtual Router cannot not be created with rcVrfId = 0. VRFID 0 is reserved for the Administrative VRF. |
| 1.3.6.1.4.1.2272.1.203.1.1.1.2.1.2 | ColumnrcVrfRowStatus | read-create | current | The status column has three defined values: - `active', which indicates that the conceptual row is available for use by the managed device; - `createAndGo', wh… |
| 1.3.6.1.4.1.2272.1.203.1.1.1.2.1.3 | ColumnrcVrfName | read-write | current | The Name of the Virtual Router. |
| 1.3.6.1.4.1.2272.1.203.1.1.1.2.1.4 | ColumnrcVrfContextName | read-create | current | The SNMPv2 Community String or SNMPv3 contextName denotes the VRF 'context' and is used to logically separate the MIB module management. |
| 1.3.6.1.4.1.2272.1.203.1.1.1.2.1.5 | ColumnrcVrfTrapEnable | read-create | current | This objects is used to enable the generation of the VrfUp and VrfDown traps. true(1) - VRF Traps Enabled false(2) - VRF Traps Disabled |
| 1.3.6.1.4.1.2272.1.203.1.1.1.2.1.6 | ColumnrcVrfMaxRoutes | read-create | current | This object specifies the maximum number of routes that this VRF can support. The default value is 10000. |
| 1.3.6.1.4.1.2272.1.203.1.1.1.2.1.7 | ColumnrcVrfAdminStatus | read-create | current | The administrative state of the Virtual Router. |
| 1.3.6.1.4.1.2272.1.203.1.1.1.2.1.8 | ColumnrcVrfVpnId | read-create | current | The Virtual Private Network Identifier of the Virtual Router. |
| 1.3.6.1.4.1.2272.1.203.1.1.1.2.1.9 | ColumnrcVrfRpTrigger | read-create | current | This object represents Routing Protocol (RP) Triggers on a Virtual Router and it meant to be used to initiate or shutdown routing protocols on a VRF. Multiple … |
| 1.3.6.1.4.1.2272.1.203.1.1.1.2.1.10 | ColumnrcVrfMaxRoutesTrapEnable | read-create | current | This objects is used to enable the generation of the VRF Max Routes Exceeded traps. true(1) - VRF Max Routes Exceeded Traps Enabled false(2) - VRF Max Routes E… |
| 1.3.6.1.4.1.2272.1.203.1.1.2 | NodercVrfStat | |||
| 1.3.6.1.4.1.2272.1.203.1.1.2.1 | NodercVrfStatScalars | |||
| 1.3.6.1.4.1.2272.1.203.1.1.2.1.1 | ScalarrcVrfConfiguredVRFs | read-only | current | The number of VRFs configured on this network element. |
| 1.3.6.1.4.1.2272.1.203.1.1.2.1.2 | ScalarrcVrfActiveVRFs | read-only | current | The number of VRFs that are active on the network element. These are VRFs for which the rcVrfStatOperStatus = up(1) |
| 1.3.6.1.4.1.2272.1.203.1.1.2.2 | TablercVrfStatTable | not-accessible | current | This table contains statistics for the Virtual Router. |
| 1.3.6.1.4.1.2272.1.203.1.1.2.2.1 | RowrcVrfStatEntry | not-accessible | current | Entries in this table are per rcVrfId. |
| 1.3.6.1.4.1.2272.1.203.1.1.2.2.1.1 | ColumnrcVrfStatRouteEntries | read-only | current | Total number of routes for this VRF. |
| 1.3.6.1.4.1.2272.1.203.1.1.2.2.1.2 | ColumnrcVrfStatFIBEntries | read-only | current | Total number of FIB Entries for this VRF. |
| 1.3.6.1.4.1.2272.1.203.1.1.2.2.1.3 | ColumnrcVrfStatUpTime | read-only | current | The time in (in hundredths of a second) since this VRF entry has been operational. |
| 1.3.6.1.4.1.2272.1.203.1.1.2.2.1.4 | ColumnrcVrfOperStatus | read-only | current | The operational status of the Virtual Router. |
| 1.3.6.1.4.1.2272.1.203.1.1.2.2.1.5 | ColumnrcVrfRpStatus | read-only | current | This object represents the status of Routing Protocols on this VRF corresponding to the list of RP specified in rcVrfRpTrigger. The BITS represent an Action-co… |
| 1.3.6.1.4.1.2272.1.203.1.1.2.2.1.6 | ColumnrcVrfRouterAddressType | read-only | current | Router Address Type of this VRF. |
| 1.3.6.1.4.1.2272.1.203.1.1.2.2.1.7 | ColumnrcVrfRouterAddress | read-only | current | Router Address of this VRF. It is derived from one of the interfaces. If loopback interface is present, the loopback interface address can be used. However, lo… |
| 1.3.6.1.4.1.2272.1.203.1.1.3 | ScalarrcVrfIpVpnTableSize | read-only | current | Size of Vrf IpVpn Table |
| 1.3.6.1.4.1.2272.1.203.1.1.4 | TablercVrfIpVpnTable | not-accessible | current | Table required to configure vpn under ip. |
| 1.3.6.1.4.1.2272.1.203.1.1.4.1 | RowrcVrfIpVpnTableEntry | not-accessible | current | Entries in this table are per rcVrfId. |
| 1.3.6.1.4.1.2272.1.203.1.1.4.1.1 | ColumnrcVrfIpVpnVrfId | not-accessible | current | The VrfId serves as the Index for the rcIpVpnVrfTable and also for the rcIpVpnRouteDistinguisherTable. It allows to connect to the vrf table to obtain other at… |
| 1.3.6.1.4.1.2272.1.203.1.1.4.1.2 | ColumnrcVrfIpVpnStatus | read-create | current | The status of IpVpn. |
| 1.3.6.1.4.1.2272.1.203.1.1.4.1.3 | ColumnrcVrfIpVpnImportRTList | read-create | current | The Import RT list is a list of all the route-targets attached to a particular vrf behaving in the import mode. |
| 1.3.6.1.4.1.2272.1.203.1.1.4.1.4 | ColumnrcVrfIpVpnExportRTList | read-create | current | The Export RT list is a list of all the route-targets attached to a particular vrf in the export mode. |
| 1.3.6.1.4.1.2272.1.203.1.1.4.1.5 | ColumnrcVrfIpVpnSvcLblAllocOpt | read-create | current | The service label allocation option for the ipvpn |
| 1.3.6.1.4.1.2272.1.203.1.1.4.1.6 | ColumnrcVrfIpVpnRowStatus | read-create | current | RowStatus for the Vpn Entry. |
| 1.3.6.1.4.1.2272.1.203.1.1.4.1.7 | ColumnrcVrfIpVpnIsidNumber | read-create | current | IP VPN I-SID number.Default 0 value indicates that no i-sid has been assinged. |
| 1.3.6.1.4.1.2272.1.203.1.1.5 | TablercVrfNameTable | not-accessible | current | This table is for EDM and SNMP agent to get source vrf name for inter-vrf route redistribute. |
| 1.3.6.1.4.1.2272.1.203.1.1.5.1 | RowrcVrfNameEntry | not-accessible | current | Each entry has the vrfid and name for source vrf needed by inter-vrf route redistribute. |
| 1.3.6.1.4.1.2272.1.203.1.1.5.1.1 | ColumnrcVrfNameVrfId | not-accessible | current | The unique id of this virtual router instance. |
| 1.3.6.1.4.1.2272.1.203.1.1.5.1.2 | ColumnrcVrfNameVrfName | read-only | current | The Name of the Virtual Router. |
| 1.3.6.1.4.1.2272.1.203.1.2 | NodercVrfNotificationObjects | |||
| 1.3.6.1.4.1.2272.1.204 | NodercCobaltBlue | |||
| 1.3.6.1.4.1.2272.1.204.1 | NodercCobaltBlueMib | |||
| 1.3.6.1.4.1.2272.1.204.1.0 | NodercCbNotifications | |||
| 1.3.6.1.4.1.2272.1.204.1.0.1 | ScalarrcLoginUserName | accessible-for-notify | current | Used to inidcation the login user name for notification |
| 1.3.6.1.4.1.2272.1.204.1.0.2 | ScalarrcLoginHostIpAddress | accessible-for-notify | current | Used to inidcation the login host ip address for notification |
| 1.3.6.1.4.1.2272.1.204.1.0.3 | ScalarrcSlotType | accessible-for-notify | current | Used to inidcate the slot type |
| 1.3.6.1.4.1.2272.1.204.1.0.4 | ScalarrcFanZoneType | accessible-for-notify | current | Type of the fan zone. |
| 1.3.6.1.4.1.2272.1.204.1.0.5 | ScalarrcFanTrayId | accessible-for-notify | current | Fan tray number in the fan zone |
| 1.3.6.1.4.1.2272.1.204.1.0.6 | ScalarrcFanUnitId | accessible-for-notify | current | Fan unit number in the fan tray |
| 1.3.6.1.4.1.2272.1.204.1.0.7 | ScalarrcCardTemp | accessible-for-notify | current | Used to inidcate the card temperature |
| 1.3.6.1.4.1.2272.1.204.1.0.8 | ScalarrcCpuUtilization | accessible-for-notify | current | Used to inidcate the CPU utilization |
| 1.3.6.1.4.1.2272.1.204.1.0.9 | ScalarrcLoginHostAddressType | accessible-for-notify | current | Used to inidcation the login host address type for notification |
| 1.3.6.1.4.1.2272.1.204.1.0.10 | ScalarrcLoginHostInetAddress | accessible-for-notify | current | Used to inidcation the login host inet address for notification |
| 1.3.6.1.4.1.2272.1.204.1.0.11 | ScalarrcSlotPowerStatus | accessible-for-notify | current | Whethere power is available to boot up the card in the slot. |
| 1.3.6.1.4.1.2272.1.204.1.0.12 | Scalarrc2kCardShutDownReason | accessible-for-notify | current | The reason can not boot up the card in the slot. |
| 1.3.6.1.4.1.2272.1.204.1.0.13 | Scalarrc2kCardZoneTemperature | accessible-for-notify | current | Used to indicate the card zone temperature |
| 1.3.6.1.4.1.2272.1.204.1.0.14 | Scalarrc2kCardTemperatureZoneInfo | accessible-for-notify | current | rc2kCardTemperatureZoneInfo indicates the zone for which the card temperature trap (rcn2kCardZoneOverheat, rcn2kCardZoneNormalTemp and rcn2kCardOverheatShutDow… |
| 1.3.6.1.4.1.2272.1.204.1.1 | NodercCbObjects | |||
| 1.3.6.1.4.1.2272.1.204.1.1.1 | NodercCbSwitchFabric | |||
| 1.3.6.1.4.1.2272.1.204.1.1.1.1 | NodercCbSwitchFabricScalars | |||
| 1.3.6.1.4.1.2272.1.204.1.1.1.1.1 | NodercCbSwitchFabricStats | |||
| 1.3.6.1.4.1.2272.1.204.1.1.1.1.1.1 | ScalarrcCbSwitchFabricDropPrec1AcceptedPackets | read-only | current | Accepted number of packets from drop precedence 1. The drop precedence is a function of the front end policer. |
| 1.3.6.1.4.1.2272.1.204.1.1.1.1.1.2 | ScalarrcCbSwitchFabricDropPrec1AcceptedBytes | read-only | current | Accepted number of bytes from drop precedence 1 |
| 1.3.6.1.4.1.2272.1.204.1.1.1.1.1.3 | ScalarrcCbSwitchFabricDropPrec1CongestionMarkedPackets | read-only | current | Congestion marked number of packets from drop precedence 1. |
| 1.3.6.1.4.1.2272.1.204.1.1.1.1.1.4 | ScalarrcCbSwitchFabricDropPrec1CongestionMarkedBytes | read-only | current | Congestion marked number of bytes from drop precedence 1. |
| 1.3.6.1.4.1.2272.1.204.1.1.1.1.1.5 | ScalarrcCbSwitchFabricDropPrec1DiscardDroppedPackets | read-only | current | WRED dropped number of packets from drop precedence 1. |
| 1.3.6.1.4.1.2272.1.204.1.1.1.1.1.6 | ScalarrcCbSwitchFabricDropPrec1DiscardDroppedBytes | read-only | current | WRED dropped number of bytes from drop precedence 1. |
| 1.3.6.1.4.1.2272.1.204.1.1.1.1.1.7 | ScalarrcCbSwitchFabricDropPrec2AcceptedPackets | read-only | current | Accepted number of packets from drop precedence 2 |
| 1.3.6.1.4.1.2272.1.204.1.1.1.1.1.8 | ScalarrcCbSwitchFabricDropPrec2AcceptedBytes | read-only | current | Accepted number of bytes from drop precedence 2 |
| 1.3.6.1.4.1.2272.1.204.1.1.1.1.1.9 | ScalarrcCbSwitchFabricDropPrec2CongestionMarkedPackets | read-only | current | Congestion marked number of packets from drop precedence 2. |
| 1.3.6.1.4.1.2272.1.204.1.1.1.1.1.10 | ScalarrcCbSwitchFabricDropPrec2CongestionMarkedBytes | read-only | current | Congestion marked number of bytes from drop precedence 2. |
| 1.3.6.1.4.1.2272.1.204.1.1.1.1.1.11 | ScalarrcCbSwitchFabricDropPrec2DiscardDroppedPackets | read-only | current | WRED dropped number of packets from drop precedence 2. |
| 1.3.6.1.4.1.2272.1.204.1.1.1.1.1.12 | ScalarrcCbSwitchFabricDropPrec2DiscardDroppedBytes | read-only | current | WRED dropped number of bytes from drop precedence 2. |
| 1.3.6.1.4.1.2272.1.204.1.1.1.1.1.13 | ScalarrcCbSwitchFabricDropPrec3AcceptedPackets | read-only | current | Accepted number of packets from drop precedence 3 |
| 1.3.6.1.4.1.2272.1.204.1.1.1.1.1.14 | ScalarrcCbSwitchFabricDropPrec3AcceptedBytes | read-only | current | Accepted number of bytes from drop precedence 3 |
| 1.3.6.1.4.1.2272.1.204.1.1.1.1.1.15 | ScalarrcCbSwitchFabricDropPrec3CongestionMarkedPackets | read-only | current | Congestion marked number of packets from drop precedence 3. |
| 1.3.6.1.4.1.2272.1.204.1.1.1.1.1.16 | ScalarrcCbSwitchFabricDropPrec3CongestionMarkedBytes | read-only | current | Congestion marked number of bytes from drop precedence 3. |
| 1.3.6.1.4.1.2272.1.204.1.1.1.1.1.17 | ScalarrcCbSwitchFabricDropPrec3DiscardDroppedPackets | read-only | current | WRED dropped number of packets from drop precedence 3. |
| 1.3.6.1.4.1.2272.1.204.1.1.1.1.1.18 | ScalarrcCbSwitchFabricDropPrec3DiscardDroppedBytes | read-only | current | WRED dropped number of bytes from drop precedence 3. |
| 1.3.6.1.4.1.2272.1.204.1.1.1.1.1.19 | ScalarrcCbSwitchFabricDropPrec4AcceptedPackets | read-only | current | Accepted number of packets from drop precedence 4 |
| 1.3.6.1.4.1.2272.1.204.1.1.1.1.1.20 | ScalarrcCbSwitchFabricDropPrec4AcceptedBytes | read-only | current | Accepted number of bytes from drop precedence 4 |
| 1.3.6.1.4.1.2272.1.204.1.1.1.1.1.21 | ScalarrcCbSwitchFabricNonWredDroppedPackets | read-only | current | Dropped packets due to non Random Early Detection |
| 1.3.6.1.4.1.2272.1.204.1.1.1.1.1.22 | ScalarrcCbSwitchFabricNonWredDroppedBytes | read-only | current | Dropped packets bytes due to non Random Early Detection |
| 1.3.6.1.4.1.2272.1.204.1.1.1.1.1.23 | ScalarrcCbSwitchFabricDequeuedPackets | read-only | current | Packets dequeued once inside the switch fabric |
| 1.3.6.1.4.1.2272.1.204.1.1.1.1.1.24 | ScalarrcCbSwitchFabricDequeuedBytes | read-only | current | Packets bytes dequeued once inside the switch fabric |
| 1.3.6.1.4.1.2272.1.204.1.1.1.1.1.25 | ScalarrcCbSwitchFabricDropPrec1DroppedPackets | read-only | current | non-WRED dropped number of packets from drop precedence 1. |
| 1.3.6.1.4.1.2272.1.204.1.1.1.1.1.26 | ScalarrcCbSwitchFabricDropPrec1DroppedBytes | read-only | current | non-WRED dropped number of bytes from drop precedence 1. |
| 1.3.6.1.4.1.2272.1.204.1.1.1.1.1.27 | ScalarrcCbSwitchFabricDropPrec2DroppedPackets | read-only | current | non-WRED dropped number of packets from drop precedence 2. |
| 1.3.6.1.4.1.2272.1.204.1.1.1.1.1.28 | ScalarrcCbSwitchFabricDropPrec2DroppedBytes | read-only | current | non-WRED dropped number of bytes from drop precedence 2. |
| 1.3.6.1.4.1.2272.1.204.1.1.1.1.1.29 | ScalarrcCbSwitchFabricDropPrec3DroppedPackets | read-only | current | non-WRED dropped number of packets from drop precedence 3. |
| 1.3.6.1.4.1.2272.1.204.1.1.1.1.1.30 | ScalarrcCbSwitchFabricDropPrec3DroppedBytes | read-only | current | non-WRED dropped number of bytes from drop precedence 3. |
| 1.3.6.1.4.1.2272.1.204.1.1.1.1.1.31 | ScalarrcCbSwitchFabricDropPrec4CongestionMarkedPackets | read-only | current | Congestion marked number of packets from drop precedence 4. |
| 1.3.6.1.4.1.2272.1.204.1.1.1.1.1.32 | ScalarrcCbSwitchFabricDropPrec4CongestionMarkedBytes | read-only | current | Congestion marked number of bytes from drop precedence 4. |
| 1.3.6.1.4.1.2272.1.204.1.1.1.1.1.33 | ScalarrcCbSwitchFabricDropPrec4DiscardDroppedPackets | read-only | current | WRED dropped number of packets from drop precedence 4. |
| 1.3.6.1.4.1.2272.1.204.1.1.1.1.1.34 | ScalarrcCbSwitchFabricDropPrec4DiscardDroppedBytes | read-only | current | WRED dropped number of bytes from drop precedence 4. |
| 1.3.6.1.4.1.2272.1.204.1.1.1.1.1.35 | ScalarrcCbSwitchFabricDropPrec4DroppedPackets | read-only | current | non-WRED dropped number of packets from drop precedence 4. |
| 1.3.6.1.4.1.2272.1.204.1.1.1.1.1.36 | ScalarrcCbSwitchFabricDropPrec4DroppedBytes | read-only | current | non-WRED dropped number of bytes from drop precedence 4. |
| 1.3.6.1.4.1.2272.1.204.1.1.1.1.1.37 | ScalarrcCbSwitchFabricOverSubscribeTotalDroppedPkts | read-only | current | Dropped number of packets due to free list underflow. |
| 1.3.6.1.4.1.2272.1.204.1.1.1.1.1.38 | ScalarrcCbSwitchFabricOverSubscribeTotalDroppedBytes | read-only | current | Dropped number of bytes due to free list underflow. |
| 1.3.6.1.4.1.2272.1.204.1.1.1.1.1.39 | ScalarrcCbSwitchFabricOverSubscribeGuaranteeDroppedPkts | read-only | current | Dropped number of packets Gbl buf thres guarantee. |
| 1.3.6.1.4.1.2272.1.204.1.1.1.1.1.40 | ScalarrcCbSwitchFabricOverSubscribeGuaranteeDroppedBytes | read-only | current | Dropped number of bytes Gbl buf thres guarantee. |
| 1.3.6.1.4.1.2272.1.204.1.1.1.1.1.41 | ScalarrcCbSwitchFabricOutPkts | read-only | current | Number of packets out from egress interface. |
| 1.3.6.1.4.1.2272.1.204.1.1.1.1.1.42 | ScalarrcCbSwitchFabricOutBytes | read-only | current | Number of bytes out from egress interface. |
| 1.3.6.1.4.1.2272.1.204.1.1.1.1.2 | ScalarrcCbSwitchFabricStatsCapture | read-write | current | Control to turn stats collection on or off |
| 1.3.6.1.4.1.2272.1.204.1.1.1.1.3 | ScalarrcCbSwitchFabricStatsPortId | read-write | current | The port on which stats is to be collected on. Must select a data port. |
| 1.3.6.1.4.1.2272.1.204.1.1.1.1.4 | ScalarrcCbSwitchFabricStatsCosId | read-write | current | The CoS or VOQ to collect Stats on |
| 1.3.6.1.4.1.2272.1.204.1.1.1.1.5 | ScalarrcCbBmeActiveBme | read-only | current | The location of the active BME in the system. BME stands for Bandwidth Manager Engine. |
| 1.3.6.1.4.1.2272.1.204.1.1.1.1.6 | ScalarrcCbBmeRedundancyMode | read-only | current | Redundancy mode for BMEs. |
| 1.3.6.1.4.1.2272.1.204.1.1.1.1.7 | ScalarrcCbProfileType | read-write | current | Switch fabric profile type. |
| 1.3.6.1.4.1.2272.1.204.1.1.1.1.8 | ScalarrcCbSwitchFabricDeviceRead | read-write | current | If turned on statistics for switch fabric counters are collected directly from devices. Otherwise, a cached copy is returned. |
| 1.3.6.1.4.1.2272.1.204.1.1.1.2 | TablercCbQueuingEngine2kTable | not-accessible | current | Table containing the 2k based queuing engine entries for the system. |
| 1.3.6.1.4.1.2272.1.204.1.1.1.2.1 | RowrcCbQueuingEngine2kEntry | not-accessible | current | Entry for the QE Table |
| 1.3.6.1.4.1.2272.1.204.1.1.1.2.1.1 | ColumnrcCbQueuingEngine2kId | not-accessible | current | Index for an entry in the QE Table. Here is the layout of the IDs in relation to the system: Location ID(s) IO on slot 3: 1..3 IO on slot 4: 4..6 CP on slot 1:… |
| 1.3.6.1.4.1.2272.1.204.1.1.1.2.1.2 | ColumnrcCbQueuingEngine2kStatus | read-only | current | Status of a given QE interface. |
| 1.3.6.1.4.1.2272.1.204.1.1.1.3 | TablercCbSwitchingEngine4kTable | not-accessible | current | Table containing the 4k based switching engine entries for the system. |
| 1.3.6.1.4.1.2272.1.204.1.1.1.3.1 | RowrcCbSwitchingEngine4kEntry | not-accessible | current | Entry for the SE Table. |
| 1.3.6.1.4.1.2272.1.204.1.1.1.3.1.1 | ColumnrcCbSwitchingEngine4kId | not-accessible | current | Index for the SE Table. Here is the layout of the IDs in relation to the system: Location ID(s) SF on slot 13: 1..3 SF on slot 14: 4..6 ... SF on slot 18: 16..… |
| 1.3.6.1.4.1.2272.1.204.1.1.1.3.1.2 | ColumnrcCbSwitchingEngine4kStatus | read-only | current | Status of a given SE Device. |
| 1.3.6.1.4.1.2272.1.204.1.1.1.4 | TablercCbSwitchingEngine9600Table | not-accessible | current | Table containing the 9600 based switching engine entries for the system. |
| 1.3.6.1.4.1.2272.1.204.1.1.1.4.1 | RowrcCbSwitchingEngine9600Entry | not-accessible | current | Entry for the SE 9600 Table. |
| 1.3.6.1.4.1.2272.1.204.1.1.1.4.1.1 | ColumnrcCbSwitchingEngine9600Id | not-accessible | current | Index for the SE Table. Here is the layout of the IDs in relation to the system: Location ID(s) SF on slot 21: 1..2 SF on slot 22: 3..4 ... SF on slot 26: 11..… |
| 1.3.6.1.4.1.2272.1.204.1.1.1.4.1.2 | ColumnrcCbSwitchingEngine9600Status | read-only | current | Status of a given Fast SE Device. |
| 1.3.6.1.4.1.2272.1.204.1.1.1.4.1.3 | ColumnrcCbSwitchingEngine9600Mode | read-only | current | Mode of given Fast SE Device either BME or SE. |
| 1.3.6.1.4.1.2272.1.204.1.1.1.5 | TablercCbQe2kSerdesLinkTable | not-accessible | current | Table containing the Serdes Link Information for the system. |
| 1.3.6.1.4.1.2272.1.204.1.1.1.5.1 | RowrcCbQe2kSerdesLinkEntry | not-accessible | current | Entry for a QE based Serdes Link Interface. The combination of the QE ID and Serdes Link ID uniquely identifies a link. |
| 1.3.6.1.4.1.2272.1.204.1.1.1.5.1.1 | ColumnrcCbQe2kSerdesLinkId | not-accessible | current | This ID maps to a particular serdes port number for the identified device. Here's the mapping: rcCbQe2kSerdesLinkId 1 = port 0; Slot 3; QE Device 1 ... rcCbQe2… |
| 1.3.6.1.4.1.2272.1.204.1.1.1.5.1.2 | ColumnrcCbQe2kSerdesLinkType | read-only | current | Link type of the serdes interface |
| 1.3.6.1.4.1.2272.1.204.1.1.1.5.1.3 | ColumnrcCbQe2kSerdesLinkStatus | read-only | current | Interface Status |
| 1.3.6.1.4.1.2272.1.204.1.1.1.5.1.4 | ColumnrcCbQe2kSerdesLinkConnectedToDevice | read-only | current | The SE/BME ID to which the QE2k ID is attached to. Note that IDs 16 & 18 are unused. |
| 1.3.6.1.4.1.2272.1.204.1.1.1.5.1.5 | ColumnrcCbQe2kSerdesLinkConnectedToSlot | read-only | current | The slot number of the switch fabric card to which the QE2k ID is attached to. |
| 1.3.6.1.4.1.2272.1.204.1.1.1.6 | TablercCbSESerdesLinkTable | not-accessible | current | Table containing the Serdes Link Information for the system. |
| 1.3.6.1.4.1.2272.1.204.1.1.1.6.1 | RowrcCbSESerdesLinkEntry | not-accessible | current | Entry for an SE based Serdes Link Interface. The combination of the QE ID and Serdes Link ID uniquely identifies a link. |
| 1.3.6.1.4.1.2272.1.204.1.1.1.6.1.1 | ColumnrcCbSESerdesLinkId | not-accessible | current | This ID maps to a particular serdes port number for the identified device. Here's the mapping: SESerdesLinkId 1 = port 0; Slot 21; Device 1 SESerdesLinkId 33 =… |
| 1.3.6.1.4.1.2272.1.204.1.1.1.6.1.2 | ColumnrcCbSESerdesLinkType | read-only | current | Link Type of the Serdes interface. Switch control interface is sci. Switch forwarding interface is sfi. |
| 1.3.6.1.4.1.2272.1.204.1.1.1.6.1.3 | ColumnrcCbSESerdesLinkStatus | read-only | current | Interface Status |
| 1.3.6.1.4.1.2272.1.204.1.1.1.6.1.4 | ColumnrcCbSESerdesLinkConnectedToDevice | read-only | current | The QE2k ID to which the SE/BME ID is attached to. |
| 1.3.6.1.4.1.2272.1.204.1.1.1.6.1.5 | ColumnrcCbSESerdesLinkConnectedToSlot | read-only | current | The slot number of the switch fabric card to which the QE2k ID is attached to. |
| 1.3.6.1.4.1.2272.1.204.1.1.1.7 | TablercCbSE9600SerdesLinkTable | not-accessible | current | Table containing the Fast Serdes Link Information for the system. |
| 1.3.6.1.4.1.2272.1.204.1.1.1.7.1 | RowrcCbSE9600SerdesLinkEntry | not-accessible | current | Entry for an SE based Serdes Link Interface. The combination of the QE ID and Serdes Link ID uniquely identifies a link. |
| 1.3.6.1.4.1.2272.1.204.1.1.1.7.1.1 | ColumnrcCbSE9600SerdesLinkId | not-accessible | current | This ID maps to a particular serdes port number for the identified device. Here's the mapping: SESerdesLinkId 1 = port 0; Slot 21; Device 1 SESerdesLinkId 97 =… |
| 1.3.6.1.4.1.2272.1.204.1.1.1.7.1.2 | ColumnrcCbSE9600SerdesLinkType | read-only | current | Link Type of the Serdes interface. Switch control interface is sci. Switch forwarding interface is sfi. |
| 1.3.6.1.4.1.2272.1.204.1.1.1.7.1.3 | ColumnrcCbSE9600SerdesLinkStatus | read-only | current | Interface Status |
| 1.3.6.1.4.1.2272.1.204.1.1.1.7.1.4 | ColumnrcCbSE9600SerdesLinkConnectedToDevice | read-only | current | The QE2k ID to which the SE/BME ID is attached to. |
| 1.3.6.1.4.1.2272.1.204.1.1.1.7.1.5 | ColumnrcCbSE9600SerdesLinkConnectedToSlot | read-only | current | The slot number of the switch fabric card to which the QE2k ID is attached to. |
| 1.3.6.1.4.1.2272.1.204.1.1.1.8 | TablercCbSPITable | not-accessible | obsolete | Table containing the system peripheral interface info. |
| 1.3.6.1.4.1.2272.1.204.1.1.1.8.1 | RowrcCbSPIEntry | not-accessible | obsolete | SPI table entry |
| 1.3.6.1.4.1.2272.1.204.1.1.1.8.1.1 | ColumnrcCbSPIId | not-accessible | obsolete | The Index for the SPI Table. Here is the layout of the IDs in relation to the system: Location ID(s) Slot 1: 1..6 Slot 2: 7..12 ... Slot 12: 57..72 Current imp… |
| 1.3.6.1.4.1.2272.1.204.1.1.1.8.1.2 | ColumnrcCbSPIStatus | read-only | obsolete | SPI Status |
| 1.3.6.1.4.1.2272.1.205 | NodercOlc | |||
| 1.3.6.1.4.1.2272.1.206 | NodercVrrpv3 | |||
| 1.3.6.1.4.1.2272.1.206.1 | NodercVrrpTmpMib | |||
| 1.3.6.1.4.1.2272.1.206.1.0 | NodercVrrpTmpNotifications | |||
| 1.3.6.1.4.1.2272.1.206.1.0.1 | NotificationrcVrrpTmpTrapNewMaster | current | The newMaster trap indicates that the sending agent has transitioned to 'Master' state. | |
| 1.3.6.1.4.1.2272.1.206.1.0.3 | NotificationrcVrrpTmpTrapProtoError | current | The error trap indicates that the sending agent has encountered the protocol error indicated by rcVrrpTmpTrapProtoErrorReason. | |
| 1.3.6.1.4.1.2272.1.206.1.1 | NodercVrrpTmpOperations | |||
| 1.3.6.1.4.1.2272.1.206.1.1.2 | ScalarrcVrrpTmpNotificationCntl | read-write | current | Indicates whether the VRRP-enabled router will generate SNMP notifications for events defined in this MIB. 'Enabled' results in SNMP notifications; 'disabled',… |
| 1.3.6.1.4.1.2272.1.206.1.1.7 | TablercVrrpTmpOperationsTable | not-accessible | current | Unified Operations table for a VRRP router which consists of a sequence (i.e., one or more conceptual rows) of 'rcVrrpTmpOperationsEntry' items which describe … |
| 1.3.6.1.4.1.2272.1.206.1.1.7.1 | RowrcVrrpTmpOperationsEntry | not-accessible | current | An entry in the rcVrrpTmpOperationsTable containing the operational characteristics of a virtual router. On a VRRP router, a given virtual router is identified… |
| 1.3.6.1.4.1.2272.1.206.1.1.7.1.1 | ColumnrcVrrpTmpOperationsIfIndex | not-accessible | current | Interface index on which the virtual router is configured. |
| 1.3.6.1.4.1.2272.1.206.1.1.7.1.2 | ColumnrcVrrpTmpOperationsInetAddrType | not-accessible | current | The IP address type of RcVrrpTmpOperationsEntry. This value applies to both rcVrrpTmpOperationsMasterIpAddr and rcVrrpTmpOperationsPrimaryIpAddr. |
| 1.3.6.1.4.1.2272.1.206.1.1.7.1.3 | ColumnrcVrrpTmpOperationsVrId | not-accessible | current | This object contains the Virtual Router Identifier (VRID). |
| 1.3.6.1.4.1.2272.1.206.1.1.7.1.4 | ColumnrcVrrpTmpOperationsVirtualMacAddr | read-only | current | The virtual MAC address of the virtual router. Although this object can be derived from the 'rcVrrpTmpOperationsVrId' object, it is defined so that it is easil… |
| 1.3.6.1.4.1.2272.1.206.1.1.7.1.5 | ColumnrcVrrpTmpOperationsState | read-only | current | The current state of the virtual router. This object has three defined values: - `initialize', which indicates that the virtual router is waiting for a startup… |
| 1.3.6.1.4.1.2272.1.206.1.1.7.1.6 | ColumnrcVrrpTmpOperationsPriority | read-create | current | This object specifies the priority to be used for the virtual router master election process. Higher values imply higher priority. A priority of '0', although … |
| 1.3.6.1.4.1.2272.1.206.1.1.7.1.7 | ColumnrcVrrpTmpOperationsAddrCount | read-only | current | The number of IP addresses that are associated with this virtual router. This number is equal to the number of rows in the rcVrrpTmpAssociatedAddrTable that co… |
| 1.3.6.1.4.1.2272.1.206.1.1.7.1.8 | ColumnrcVrrpTmpOperationsMasterIpAddr | read-only | current | The master router's real IP address. Master router would set this address to rcVrrpTmpOperationsPrimaryIpAddr while transitioning to master state. For backup r… |
| 1.3.6.1.4.1.2272.1.206.1.1.7.1.9 | ColumnrcVrrpTmpOperationsPrimaryIpAddr | read-create | current | In the case where there are more than one IP Address (associated IP addresses) for a given `ifIndex', this object is used to specify the IP address that will b… |
| 1.3.6.1.4.1.2272.1.206.1.1.7.1.10 | ColumnrcVrrpTmpOperationsAdvInterval | read-create | current | The time interval between sending advertisement messages. Only the master router sends VRRP advertisements. It is configured in seconds, but it is converted in… |
| 1.3.6.1.4.1.2272.1.206.1.1.7.1.11 | ColumnrcVrrpTmpOperationsPreemptMode | read-create | current | Controls whether a higher priority virtual router will preempt a lower priority master. |
| 1.3.6.1.4.1.2272.1.206.1.1.7.1.12 | ColumnrcVrrpTmpOperationsAcceptMode | read-create | current | Controls whether a virtual router in Master state will accept packets addressed to the address owner's IPv6 address as its own if it is not the IPv6 address ow… |
| 1.3.6.1.4.1.2272.1.206.1.1.7.1.13 | ColumnrcVrrpTmpOperationsUpTime | read-only | current | This is the value of the `sysUpTime' object when this virtual router (i.e., the `rcVrrpTmpOperationsState') transitioned out of `initialized'. |
| 1.3.6.1.4.1.2272.1.206.1.1.7.1.14 | ColumnrcVrrpTmpOperationsStorageType | read-create | current | The storage type for this conceptual row. Write access is not required. It is optional to support nonVolatile StorageType enumeration. |
| 1.3.6.1.4.1.2272.1.206.1.1.7.1.15 | ColumnrcVrrpTmpOperationsRowStatus | read-create | current | The RowStatus variable should be used in accordance to installation and removal conventions for conceptual rows. When `rcVrrpTmpOperationsRowStatus' is set to … |
| 1.3.6.1.4.1.2272.1.206.1.1.8 | TablercVrrpTmpAssociatedIpAddrTable | not-accessible | current | The table of addresses associated with this virtual router. |
| 1.3.6.1.4.1.2272.1.206.1.1.8.1 | RowrcVrrpTmpAssociatedIpAddrEntry | not-accessible | current | An entry in the table contains an IP address that is associated with a virtual router. The number of rows for a given IP version, VrID and ifIndex will equal t… |
| 1.3.6.1.4.1.2272.1.206.1.1.8.1.1 | ColumnrcVrrpTmpAssociatedIpAddr | not-accessible | current | The assigned IP addresses that a virtual router is responsible for backing up. The size of this object is either 4 or 16 depending on rcVrrpTmpOperationsInetAd… |
| 1.3.6.1.4.1.2272.1.206.1.1.8.1.2 | ColumnrcVrrpTmpAssociatedIpAddrPrefixLength | not-accessible | current | The length of the prefix (in bits). |
| 1.3.6.1.4.1.2272.1.206.1.1.8.1.3 | ColumnrcVrrpTmpAssociatedStorageType | read-create | current | The storage type for this conceptual row. Write access is not required. It is optional to support nonVolatile StorageType enumeration. |
| 1.3.6.1.4.1.2272.1.206.1.1.8.1.4 | ColumnrcVrrpTmpAssociatedIpAddrRowStatus | read-create | current | The RowStatus variable, used according to installation and removal conventions for conceptual rows. To create a row in this table, a manager sets this object t… |
| 1.3.6.1.4.1.2272.1.206.1.1.9 | ScalarrcVrrpTmpNewMasterReason | read-only | current | This indicates the reason for rcVrrpTmpNewMaster trap. Used by rcVrrpTmpTrapNewMaster trap. The object can be polled if the rcVrrpTmpNewMaster trap is lost to … |
| 1.3.6.1.4.1.2272.1.206.1.1.10 | ScalarrcVrrpTmpTrapProtoErrReason | accessible-for-notify | current | This indicates the reason for protocol error trap. Used by rcVrrpTmpTrapProtoError trap. |
| 1.3.6.1.4.1.2272.1.206.1.2 | NodercVrrpTmpStatistics | |||
| 1.3.6.1.4.1.2272.1.206.1.2.1 | ScalarrcVrrpTmpRouterChecksumErrors | read-only | deprecated | The total number of VRRP packets received with an invalid VRRP checksum value. |
| 1.3.6.1.4.1.2272.1.206.1.2.2 | ScalarrcVrrpTmpRouterVersionErrors | read-only | deprecated | The total number of VRRP packets received with an unknown or unsupported version number. |
| 1.3.6.1.4.1.2272.1.206.1.2.3 | ScalarrcVrrpTmpRouterVrIdErrors | read-only | deprecated | The total number of VRRP packets received with an invalid VRID for this virtual router. |
| 1.3.6.1.4.1.2272.1.206.1.2.5 | TablercVrrpTmpRouterStatisticsTable | not-accessible | current | Table of virtual router statistics. |
| 1.3.6.1.4.1.2272.1.206.1.2.5.1 | RowrcVrrpTmpRouterStatisticsEntry | not-accessible | current | An entry in the table, containing statistics information about a given virtual router. |
| 1.3.6.1.4.1.2272.1.206.1.2.5.1.1 | ColumnrcVrrpTmpStatisticsMasterTransitions | read-only | current | The total number of times that this virtual router's state has transitioned to MASTER. Discontinuities in the value of this counter can occur at re-initializat… |
| 1.3.6.1.4.1.2272.1.206.1.2.5.1.2 | ColumnrcVrrpTmpStatisticsRcvdAdvertisements | read-only | current | The total number of VRRP advertisements received by this virtual router. Discontinuities in the value of this counter can occur at re-initialization of the man… |
| 1.3.6.1.4.1.2272.1.206.1.2.5.1.3 | ColumnrcVrrpTmpStatisticsAdvIntervalErrors | read-only | current | The total number of VRRP advertisement packets received for which the advertisement interval is different than the one configured for the local virtual router.… |
| 1.3.6.1.4.1.2272.1.206.1.2.5.1.4 | ColumnrcVrrpTmpStatisticsIpTtlErrors | read-only | current | The total number of VRRP packets received by the Virtual router with IPv4 TTL (for VRRP over IPv4) or IPv6 Hop Limit (for VRRP over IPv6) not equal to 255. Dis… |
| 1.3.6.1.4.1.2272.1.206.1.2.5.1.5 | ColumnrcVrrpTmpStatisticsRcvdPriZeroPackets | read-only | current | The total number of VRRP packets received by the virtual router with a priority of '0'. Discontinuities in the value of this counter can occur at re-initializa… |
| 1.3.6.1.4.1.2272.1.206.1.2.5.1.6 | ColumnrcVrrpTmpStatisticsSentPriZeroPackets | read-only | current | The total number of VRRP packets sent by the virtual router with a priority of '0'. Discontinuities in the value of this counter can occur at re-initialization… |
| 1.3.6.1.4.1.2272.1.206.1.2.5.1.7 | ColumnrcVrrpTmpStatisticsRcvdInvalidTypePkts | read-only | current | The number of VRRP packets received by the virtual router with an invalid value in the 'type' field. Discontinuities in the value of this counter can occur at … |
| 1.3.6.1.4.1.2272.1.206.1.2.5.1.8 | ColumnrcVrrpTmpStatisticsAddressListErrors | read-only | current | The total number of packets received for which the address list does not match the locally configured list for the virtual router. Discontinuities in the value… |
| 1.3.6.1.4.1.2272.1.206.1.2.5.1.9 | ColumnrcVrrpTmpStatisticsPacketLengthErrors | read-only | current | The total number of packets received with a packet length less than the length of the VRRP header. Discontinuities in the value of this counter can occur at re… |
| 1.3.6.1.4.1.2272.1.206.1.2.5.1.10 | ColumnrcVrrpTmpStatisticsRcvdInvalidAuthentications | read-only | current | The total number of packets received with an unknown authentication type. |
| 1.3.6.1.4.1.2272.1.206.1.2.5.1.11 | ColumnrcVrrpTmpStatisticsDiscontinuityTime | read-only | current | The value of sysUpTime on the most recent occasion at which any one or more of this entry's counters suffered a discontinuity. If no such discontinuities have … |
| 1.3.6.1.4.1.2272.1.206.1.2.5.1.12 | ColumnrcVrrpTmpStatisticsRefreshRate | read-only | current | The minimum reasonable polling interval for this entry. This object provides an indication of the minimum Amount of time required to update the counters in thi… |
| 1.3.6.1.4.1.2272.1.206.1.2.6 | TablercVrrpTmpRouterGlobalStatisticsTable | not-accessible | current | Table of virtual router global statistics. It shows the global statistics, depending on IP version. |
| 1.3.6.1.4.1.2272.1.206.1.2.6.1 | RowrcVrrpTmpRouterGlobalStatisticsEntry | not-accessible | current | An entry in the table, containing global statistics information about a given IP type. |
| 1.3.6.1.4.1.2272.1.206.1.2.6.1.1 | ColumnrcVrrpTmpRouterGlobalStatisticsInetAddrType | not-accessible | current | The IP address type of rcVrrpTmpRouterGlobalStatisticsEntry. It can be either IPv4 or IPv6 |
| 1.3.6.1.4.1.2272.1.206.1.2.6.1.2 | ColumnrcVrrpTmpRouterGlobalStatisticsChecksumErrors | read-only | current | The total number of VRRP packets received with an invalid VRRP checksum value. |
| 1.3.6.1.4.1.2272.1.206.1.2.6.1.3 | ColumnrcVrrpTmpRouterGlobalStatisticsVersionErrors | read-only | current | The total number of VRRP packets received with an unknown or unsupported version number. |
| 1.3.6.1.4.1.2272.1.206.1.2.6.1.4 | ColumnrcVrrpTmpRouterGlobalStatisticsVrIdErrors | read-only | current | The total number of VRRP packets received with an invalid VRID for this virtual router. |
| 1.3.6.1.4.1.2272.1.206.2 | NodercVrrpExtMib | |||
| 1.3.6.1.4.1.2272.1.206.2.1 | NodercVrrpExtObjects | |||
| 1.3.6.1.4.1.2272.1.206.2.1.1 | NodercVrrpExtScalars | |||
| 1.3.6.1.4.1.2272.1.206.2.1.1.1 | ScalarrcVrrpExtPingVirtualAddrEnable | read-write | current | Used to configure whether this device should respond to pings directed to a virtual router's IPv6 address. |
| 1.3.6.1.4.1.2272.1.206.2.1.1.2 | ScalarrcVrrpExtVersionNumber | read-only | current | The version number of Vrrp is 3. |
| 1.3.6.1.4.1.2272.1.206.2.1.1.3 | ScalarrcVrrpExtTrapStateTransitionType | read-only | current | Potential types of state transitions.Used by rcVrrpv3TrapStateTransition trap. |
| 1.3.6.1.4.1.2272.1.206.2.1.1.4 | ScalarrcVrrpExtTrapStateTransitionCause | read-only | current | Potential types of causes that will generate a rcVrrpExtTrapStateTransition trap. |
| 1.3.6.1.4.1.2272.1.206.2.1.1.5 | ScalarrcVrrpExtOperationsVrId | read-only | current | This object contains the Virtual Router Identifier (VRID).This is used in rcVrrpExtTrapStateTransition. |
| 1.3.6.1.4.1.2272.1.206.2.2 | NodercVrrpExtNotifications | |||
| 1.3.6.1.4.1.2272.1.206.2.2.1 | NotificationrcVrrpExtTrapStateTransition | current | A rcVrrpExtTrapStateTransition trap signifies a state transition has occurred on a particular vrrp interface. Implementation of this trap is optional. | |
| 1.3.6.1.4.1.2272.1.206.2.3 | NodercVrrpExtOperations | |||
| 1.3.6.1.4.1.2272.1.206.2.3.11 | TablercVrrpExtOperationsTable | not-accessible | current | Unified Operations table for a VRRP router which consists of a sequence (i.e., one or more conceptual rows) of 'rcVrrpExtOperationsEntry'and 'rcVrrpTmpOperatio… |
| 1.3.6.1.4.1.2272.1.206.2.3.11.1 | RowrcVrrpExtOperationsEntry | not-accessible | current | An entry in the rcVrrpExtOperationsTable containing the operational characteristics of a virtual router. On a VRRP router, a given virtual router is identified… |
| 1.3.6.1.4.1.2272.1.206.2.3.11.1.1 | ColumnrcVrrpExtOperationsAction | read-create | current | Used to trigger an action on this vrrp interface. |
| 1.3.6.1.4.1.2272.1.206.2.3.11.1.2 | ColumnrcVrrpExtOperationsBackUpMaster | read-create | current | Enable the backup VRRP switch traffic forwarding. This will reduce the traffic in IST link in the time of SMLT. |
| 1.3.6.1.4.1.2272.1.206.2.3.11.1.3 | ColumnrcVrrpExtOperationsBackUpMasterState | read-only | current | Indicate whether backup VRRP switch traffic forwarding is enabled or not. |
| 1.3.6.1.4.1.2272.1.206.2.3.11.1.4 | ColumnrcVrrpExtOperationsCriticalIpAddr | read-create | current | IP address of the interface that will cause a shutdown event.Only IPv6 address is supported as of now. |
| 1.3.6.1.4.1.2272.1.206.2.3.11.1.5 | ColumnrcVrrpExtOperationsCriticalIpAddrEnabled | read-create | current | Indicate if an user-defined critical IP address should be enabled. 'NO' = use the default IP address (::). No effect if an user-defined IP address does not exi… |
| 1.3.6.1.4.1.2272.1.206.2.3.11.1.6 | ColumnrcVrrpExtOperationsControl | read-create | current | This object will enable/disable the virtual router function. Setting the value to 'enabled', will transition the state of the router from 'initialize to 'backu… |
| 1.3.6.1.4.1.2272.1.206.2.3.11.1.7 | ColumnrcVrrpExtOperationsHoldDownTimer | read-create | current | Used to configure the amount of time (in seconds) to wait before preempting the current vrrp master. |
| 1.3.6.1.4.1.2272.1.206.2.3.11.1.8 | ColumnrcVrrpExtOperationsHoldDownState | read-only | current | Used to indicate the hold-down state of this vrrp interface. If the hold-down timer is operational this variable will be set to 'active'. 'dormant' otherwise. |
| 1.3.6.1.4.1.2272.1.206.2.3.11.1.9 | ColumnrcVrrpExtOperationsHoldDownTimeRemaining | read-only | current | Used to indicate the amount of time (in seconds) left before the rcVrrpExtOperationsHoldDownTimer will expire. |
| 1.3.6.1.4.1.2272.1.206.2.3.11.1.10 | ColumnrcVrrpExtOperationsFasterAdvInterval | read-create | current | This is the faster advertisement interval, in milliseconds, between sending advertisement messages. When the faster advertisement interval enable is checked, t… |
| 1.3.6.1.4.1.2272.1.206.2.3.11.1.11 | ColumnrcVrrpExtOperationsFasterAdvIntervalEnabled | read-create | current | Used to indicate if the Faster Advertisement Interval should be used.'Disable' means use regular Advertisement interval. |
| 1.3.6.1.4.1.2272.1.206.2.3.11.1.12 | ColumnrcVrrpExtOperationsLinkLocalAddr | read-create | current | The assigned virtual address of the router. For IPv6 it is the Linklocal addresses to the virtual router interface. For Ipv4 it is the IP address of the virtua… |
| 1.3.6.1.4.1.2272.1.206.2.3.11.1.13 | ColumnrcVrrpExtOperationsGlobalIpAddr | read-create | current | The assigned Global addresses to the virtual router interface. This mib object support only IPv6 address as of now. This object is not used anymore since we ca… |
| 1.3.6.1.4.1.2272.1.206.2.3.11.1.14 | ColumnrcVrrpExtOperationsMasterAdvInterval | read-only | current | This is the Advertisement Interval contained in advertisements received from the Master. This value is saved by virtual routers in the Backup state and is used… |
| 1.3.6.1.4.1.2272.1.207 | NodercWlan | |||
| 1.3.6.1.4.1.2272.1.207.1 | NodercWlanScalars | |||
| 1.3.6.1.4.1.2272.1.207.1.1 | ScalarrcWlanVlanReserveVlanList | read-write | current | The object is used as bitfield to indicate all the VLANs that are reserved. Each VLAN is stored as a bit. The most-significant (left-most) bit represents Vlan … |
| 1.3.6.1.4.1.2272.1.207.1.2 | ScalarrcWlanVlanReserveNumberVlans | read-only | current | The object contains the number of reserved VLANs. |
| 1.3.6.1.4.1.2272.1.207.1.3 | ScalarrcWlanVlanReserveVlanInUse | read-only | current | The object indicates if a Vlan Id from the reserved pool is in use. |
| 1.3.6.1.4.1.2272.1.207.1.4 | ScalarrcWlanVlanReserveVlanInUseBySmlt | read-only | current | The object indicates if a Vlan Id from the reserved pool is in use by SMLT. |
| 1.3.6.1.4.1.2272.1.207.1.5 | ScalarrcWlanVlanReserveSmltConfigMatch | read-only | current | The object indicates if a Vlan Id from the reserved pool is the same for SMLT peers. |
| 1.3.6.1.4.1.2272.1.207.1.6 | ScalarrcWlanConfigSystemSmltDataIPAddressType | read-write | current | This object indicates the type of internet address in the corresponding instance of rcWlanConfigSystemSmltDataIPAddress. Currently,only the values ipv4(1) and … |
| 1.3.6.1.4.1.2272.1.207.1.7 | ScalarrcWlanConfigSystemSmltDataIPAddress | read-write | current | This object contains the IP address that will be used for Wireless LAN switch SMLT data tunnel. |
| 1.3.6.1.4.1.2272.1.207.1.8 | ScalarrcWlanConfigSmltHoldDownTimer | read-write | current | Timer value, the range of value is from 0 to 3600. Do not start forwarding data until local syncronization is done. |
| 1.3.6.1.4.1.2272.1.207.1.9 | ScalarrcWlanConfigSmltEnabled | read-write | current | This is used to enable SMLT wireless feature. A value of true(1) means enabled. |
| 1.3.6.1.4.1.2272.1.207.1.10 | ScalarrcWlanConfigSmltTcpUdpBasePort | read-write | current | TCP/UDP port to be used in SMLT. |
| 1.3.6.1.4.1.2272.1.207.1.11 | ScalarrcWlanConfigRemoteVlanStg | read-write | current | The stg id for the remote vlan in the STP/MSTP mode. In STP mode, the stg range is 1 to 64. IN MSTP mode, the msti range is 0 to 63. Setting to 255 is used to … |
| 1.3.6.1.4.1.2272.1.207.1.12 | ScalarrcWlanConfigManagementAddressType | read-write | current | This object indicates the type of address contained in the object rcWlanConfigManagementAddress. |
| 1.3.6.1.4.1.2272.1.207.1.13 | ScalarrcWlanConfigManagementAddress | read-write | current | This address is used as the management interface of the wireless switch. |
| 1.3.6.1.4.1.2272.1.207.2 | TablercWlanMobSwTunnelTable | not-accessible | current | this table contains entries of the Access and Mobility tunnels that are established at the local switch. |
| 1.3.6.1.4.1.2272.1.207.2.1 | RowrcWlanMobSwTunnelEntry | not-accessible | current | A peer mobility switch or an access point.With one rcWlanMobSwTunnelIntfId there ccould be two endpoints with different rcWlanMobSwTunnelPeerDeviceId in the ca… |
| 1.3.6.1.4.1.2272.1.207.2.1.1 | ColumnrcWlanMobSwTunnelIntfId | not-accessible | current | Used to display Logical Port (for example, WLAN tunnel) for the tunnel. |
| 1.3.6.1.4.1.2272.1.207.2.1.2 | ColumnrcWlanMobSwTunnelPeerDeviceId | not-accessible | current | The MAC address that uniquely identifies the peer mobility switch or access point on the other side of the tunnel. |
| 1.3.6.1.4.1.2272.1.207.2.1.3 | ColumnrcWlanMobSwTunnelPeerAddrType | read-only | current | This object indicates the type of internet address in the corresponding instance of rcWlanMobSwTunnelPeerAddr. Currently, only the values ipv4(1) and ipv6(2) a… |
| 1.3.6.1.4.1.2272.1.207.2.1.4 | ColumnrcWlanMobSwTunnelPeerAddr | read-only | current | The address of the peer mobility switch or access point. The type of address is indicated by the corresponding instance of rcWlanMobSwTunnelPeerAddrType. |
| 1.3.6.1.4.1.2272.1.207.2.1.5 | ColumnrcWlanMobSwTunnelPeerUdpPort | read-only | current | Indicates the UDP port which the peer mobility switch or access point will use for control protocol communication with the local switch. |
| 1.3.6.1.4.1.2272.1.207.2.1.6 | ColumnrcWlanMobSwTunnelStatus | read-only | current | Indicates the status of the mobility tunnel connection to this peer mobility switch, or the access tunnel to this access point. |
| 1.3.6.1.4.1.2272.1.207.2.1.7 | ColumnrcWlanMobSwTunnelType | read-only | current | The tunnel type. |
| 1.3.6.1.4.1.2272.1.207.3 | NodercWlanNotifications | |||
| 1.3.6.1.4.1.2272.1.207.3.1 | ScalarrcWlanNotificationErrorType | accessible-for-notify | current | Indicates the type of the error occurred. |
| 1.3.6.1.4.1.2272.1.207.3.2 | ScalarrcWlanNotificationTrapInfo | accessible-for-notify | current | String that contains error details. |
| 1.3.6.1.4.1.2272.1.207.3.3 | ScalarrcWlanNotificationMobilityTunnelPeerId | accessible-for-notify | current | This object contains the MAC address that uniquely identifies the Tunnel peer id. This value is what is used to identify this switch in peer switches, and is u… |
| 1.3.6.1.4.1.2272.1.207.3.4 | ScalarrcWlanNotificationMobTunnelAddressType | accessible-for-notify | current | This object indicates the type of internet address in the corresponding instance of rcWlanAuxMobTunnelAddress. Currently, only the values ipv4(1) and ipv6(2) a… |
| 1.3.6.1.4.1.2272.1.207.3.5 | ScalarrcWlanNotificationMobTunnelAddress | accessible-for-notify | current | This object contains the tunnel IP address that will be used in errors notification traps. |
| 1.3.6.1.4.1.2272.1.207.3.6 | ScalarrcWlanNotificationMobTunnelMVlanName | accessible-for-notify | current | This object contains mobility VLAN name to be used in errors notification traps. |
| 1.3.6.1.4.1.2272.1.207.4 | TablercWlanTunnelStatTable | not-accessible | current | A table used to store wireless LAN tunnel statistics. |
| 1.3.6.1.4.1.2272.1.207.4.1 | RowrcWlanTunnelStatEntry | not-accessible | current | interface counters |
| 1.3.6.1.4.1.2272.1.207.4.1.1 | ColumnrcWlanTunnelStatInterfaceId | not-accessible | current | Used to display Logical Port (for example, WLAN tunnel) for the tunnel. |
| 1.3.6.1.4.1.2272.1.207.4.1.2 | ColumnrcWlanTunnelStatPeerDeviceId | not-accessible | current | The MAC address that uniquely identifies the peer mobility switch or access point on the other side of the tunnel. |
| 1.3.6.1.4.1.2272.1.207.4.1.3 | ColumnrcWlanTunnelStatBridgeInUnicastFrames | read-only | current | The total number of incoming unicast frames that were bridged. |
| 1.3.6.1.4.1.2272.1.207.4.1.4 | ColumnrcWlanTunnelStatBridgeInMulticastFrames | read-only | current | The total number of incoming multicast frames that were bridged. |
| 1.3.6.1.4.1.2272.1.207.4.1.5 | ColumnrcWlanTunnelStatBridgeInBroadcastFrames | read-only | current | The total number of incoming broadcast frames that were bridged. |
| 1.3.6.1.4.1.2272.1.207.4.1.6 | ColumnrcWlanTunnelStatBridgeInDiscards | read-only | current | The total number of frames that were discarded by the bridging entity. |
| 1.3.6.1.4.1.2272.1.207.4.1.7 | ColumnrcWlanTunnelStatBridgeOutFrames | read-only | current | The total number of outgoing frames that were bridged. |
| 1.3.6.1.4.1.2272.1.207.4.1.8 | ColumnrcWlanTunnelStatRouteInUnicastFrames | read-only | current | The total number of incoming unicast frames that were routed. |
| 1.3.6.1.4.1.2272.1.207.4.1.9 | ColumnrcWlanTunnelStatRouteInMulticastFrames | read-only | current | The total number of incoming multicast frames that were routed. |
| 1.3.6.1.4.1.2272.1.207.4.1.10 | ColumnrcWlanTunnelStatRouteInDiscards | read-only | current | The total number of incoming frames that were discarded by the routing entity. |
| 1.3.6.1.4.1.2272.1.207.4.1.11 | ColumnrcWlanTunnelStatRouteOutUnicastFrames | read-only | current | The total number of outgoing unicast frames that were routed. |
| 1.3.6.1.4.1.2272.1.207.4.1.12 | ColumnrcWlanTunnelStatRouteOutMulticastFrames | read-only | current | The total number of outgoing multicast frames that were routed. |
| 1.3.6.1.4.1.2272.1.207.4.1.13 | ColumnrcWlanTunnelStatKeepaliveInFrames | read-only | current | The total number of incoming keepalive frames. |
| 1.3.6.1.4.1.2272.1.207.4.1.14 | ColumnrcWlanTunnelStatKeepaliveOutFrames | read-only | current | The total number of outgoing keepalive frames. |
| 1.3.6.1.4.1.2272.1.207.4.1.15 | ColumnrcWlanTunnelStatAllInFrames | read-only | current | The total number of incoming frames that were bridged, routed and incoming keepalive frames. |
| 1.3.6.1.4.1.2272.1.207.4.1.16 | ColumnrcWlanTunnelStatAllOutFrames | read-only | current | The total number of outgoing frames that were bridged, routed and outgoing keepalive frames. |
| 1.3.6.1.4.1.2272.1.207.4.1.17 | ColumnrcWlanTunnelStatAllInDiscardFrames | read-only | current | The total number of incoming frames that were discarded. |
| 1.3.6.1.4.1.2272.1.207.4.1.18 | ColumnrcWlanTunnelStatAllOutDiscardFrames | read-only | current | The total number of outgoing frames that were discarded. |
| 1.3.6.1.4.1.2272.1.207.4.1.19 | ColumnrcWlanTunnelStatReset | read-write | current | This is an action object. When this object is set to reset(2), statistics for the tunnel will be cleared. Read on this object always returns none(1). |
| 1.3.6.1.4.1.2272.1.208 | NodercVspTalk | |||
| 1.3.6.1.4.1.2272.1.208.1 | NodercVspTalkObjects | |||
| 1.3.6.1.4.1.2272.1.208.1.1 | NodercVspTalkScalars | |||
| 1.3.6.1.4.1.2272.1.208.1.1.1 | ScalarrcVspTalkGlobalEnable | read-write | current | Create or destroy the VSPTalk related data structure and threads. When it is false, rcVspTalkGroupTable entry will be removed. |
| 1.3.6.1.4.1.2272.1.208.1.1.2 | ScalarrcVspTalkEndpointAddress | read-write | current | The assigned circuitless IP address of the application endpoint which must belong to the same subnet of existing IP interface on device. This object assignment… |
| 1.3.6.1.4.1.2272.1.208.1.1.3 | ScalarrcVspTalkEndpointVrfName | read-write | current | The name of the virtual Router which rcVspTalkEndpointAddress belong to. |
| 1.3.6.1.4.1.2272.1.208.1.1.4 | ScalarrcVspTalkNotificationEnable | read-write | current | Enable/disable the notifcation of the register events |
| 1.3.6.1.4.1.2272.1.208.1.2 | TablercVspTalkGroupTable | not-accessible | current | Vsp Talk Group includes IM configuraton and users |
| 1.3.6.1.4.1.2272.1.208.1.2.1 | RowrcVspTalkGroupEntry | not-accessible | current | Entry of the IM group |
| 1.3.6.1.4.1.2272.1.208.1.2.1.1 | ColumnrcVspTalkGroupType | not-accessible | current | Type of vsp messaging group |
| 1.3.6.1.4.1.2272.1.208.1.2.1.2 | ColumnrcVspTalkGroupServerAddress | read-create | current | Messaging server address |
| 1.3.6.1.4.1.2272.1.208.1.2.1.3 | ColumnrcVspTalkGroupServerPort | read-create | current | The TCP port for Messaging |
| 1.3.6.1.4.1.2272.1.208.1.2.1.4 | ColumnrcVspTalkGroupServerOldSslTypeEnable | read-create | current | Enable/disable using old style SSL interface |
| 1.3.6.1.4.1.2272.1.208.1.2.1.5 | ColumnrcVspTalkGroupServerEncryption | read-create | current | Encrytion option. |
| 1.3.6.1.4.1.2272.1.208.1.2.1.6 | ColumnrcVspTalkGroupServerProxy | read-create | current | Messaging server proxy |
| 1.3.6.1.4.1.2272.1.208.1.2.1.7 | ColumnrcVspTalkGroupClientUsername | read-create | current | Messaging client Username for this device |
| 1.3.6.1.4.1.2272.1.208.1.2.1.8 | ColumnrcVspTalkGroupClientPassword | read-create | current | Password for rcVspTalkGroupClientUsername which is registered in the server. |
| 1.3.6.1.4.1.2272.1.208.1.2.1.9 | ColumnrcVspTalkGroupClientMembers | read-create | current | A list of members of this messaging group. There is a max of 12 members, with names seperated by comma |
| 1.3.6.1.4.1.2272.1.208.1.2.1.10 | ColumnrcVspTalkGroupEnable | read-create | current | Adminstratively Enable/disable this messaging group |
| 1.3.6.1.4.1.2272.1.208.1.2.1.11 | ColumnrcVspTalkGroupRowStatus | read-create | current | Used to create/delete entries |
| 1.3.6.1.4.1.2272.1.209 | NodercSlaMon | |||
| 1.3.6.1.4.1.2272.1.210 | NodercLldp | |||
| 1.3.6.1.4.1.2272.1.210.1 | ScalarrcLldpEnable | read-write | current | This object controls the LLDP protocols. It is used to enable/disable LLDP protocol. |
| 1.3.6.1.4.1.2272.1.211 | NodercVirtualIst | |||
| 1.3.6.1.4.1.2272.1.211.1 | ScalarrcVirtualIstSessionStatus | read-only | current | Used to enable/disable virtual IST functionality. |
| 1.3.6.1.4.1.2272.1.211.2 | ScalarrcVirtualIstPeerIp | read-write | current | Virtual IST Peer Ip address. |
| 1.3.6.1.4.1.2272.1.211.3 | ScalarrcVirtualIstVlanId | read-write | current | Virtual IST Vlan Id. 0 is default when it is not set. |
| 1.3.6.1.4.1.2272.1.212 | NodercSingleCpSystem | |||
| 1.3.6.1.4.1.2272.1.212.1 | ScalarrcSingleCpSystemCpuTemperature | read-only | current | Used to indicate the temperature in celsius of the air near CPU area. |
| 1.3.6.1.4.1.2272.1.212.2 | ScalarrcSingleCpSystemMacTemperature | read-only | current | Used to indicate the temperature in celsius of the air near MAC area. |
| 1.3.6.1.4.1.2272.1.212.3 | ScalarrcSingleCpSystemPhy1Temperature | read-only | current | Used to indicate the temperature in celsius of the air near PHY1 area. |
| 1.3.6.1.4.1.2272.1.212.4 | ScalarrcSingleCpSystemPhy2Temperature | read-only | current | Used to indicate the temperature in celsius of the air near PHY2 area. If its value is zero, then it is not applicable to that platform |
| 1.3.6.1.4.1.2272.1.212.5 | ScalarrcSingleCpSystemMac2Temperature | read-only | current | Used to indicate the temperature in celsius of the air near MAC2 area. If its value is zero, then it is not applicable to that platform |
| 1.3.6.1.4.1.2272.1.213 | NodercIpsec | |||
| 1.3.6.1.4.1.2272.1.213.1 | TablercIpsecPolicyTable | not-accessible | current | The policy table is used to store all the attribute values under the policy. An IPSec policy typically consists of a policy name, raddr and laddr to which the … |
| 1.3.6.1.4.1.2272.1.213.1.1 | RowrcIpsecPolicyEntry | not-accessible | current | An Ipsec Policy table entry. |
| 1.3.6.1.4.1.2272.1.213.1.1.1 | ColumnrcIpsecPolicyName | not-accessible | current | This object contains name of the Ipsec policy. |
| 1.3.6.1.4.1.2272.1.213.1.1.2 | ColumnrcIpsecPolicyDstAddressType | read-create | current | This object specifies the type of address field in the rcIpsecPolicyDstAddress. Only IPv6 address types are supported for this release. |
| 1.3.6.1.4.1.2272.1.213.1.1.3 | ColumnrcIpsecPolicyDstAddress | read-create | current | The destination interface address to which the policy is added. |
| 1.3.6.1.4.1.2272.1.213.1.1.4 | ColumnrcIpsecPolicySrcAddressType | read-create | current | This object specifies the type of address field in the rcIpsecPolicySrcAddress. Only IPv6 address types are supported for this release. |
| 1.3.6.1.4.1.2272.1.213.1.1.5 | ColumnrcIpsecPolicySrcAddress | read-create | current | The source interface address of the router to which the policy is added. |
| 1.3.6.1.4.1.2272.1.213.1.1.6 | ColumnrcIpsecPolicySrcPort | read-create | current | The TCP/UDP source port number for which the policy is added. |
| 1.3.6.1.4.1.2272.1.213.1.1.7 | ColumnrcIpsecPolicyDstPort | read-create | current | The TCP/UDP destination port number for which the policy is added. |
| 1.3.6.1.4.1.2272.1.213.1.1.8 | ColumnrcIpsecPolicyAdminFlag | read-create | current | The flag is used to enable the policy created. |
| 1.3.6.1.4.1.2272.1.213.1.1.9 | ColumnrcIpsecPolicyL4Protocol | read-create | current | This object specifies the IP protocol number for the l4 protocol to which this particular policy is added. |
| 1.3.6.1.4.1.2272.1.213.1.1.10 | ColumnrcIpsecPolicyAction | read-create | current | The object contains a value that set the action for the IPSec policy, either to permit or drop the packet. |
| 1.3.6.1.4.1.2272.1.213.1.1.11 | ColumnrcIpsecPolicyRowStatus | read-create | current | Used to create/delete entries in the rcIpsecPolicyTable. |
| 1.3.6.1.4.1.2272.1.213.2 | TablercIpsecSATable | not-accessible | current | The Security Association(SA) table is used to store all the attribute values under the security association. An IPSec SA typically consists of SA name, securit… |
| 1.3.6.1.4.1.2272.1.213.2.1 | RowrcIpsecSAEntry | not-accessible | current | A Security Association structure table entry. |
| 1.3.6.1.4.1.2272.1.213.2.1.1 | ColumnrcIpsecSAName | not-accessible | current | This object contains name of the security association. |
| 1.3.6.1.4.1.2272.1.213.2.1.2 | ColumnrcIpsecSASpi | read-create | current | This object contains, Security Parameter Index (SPI), which is an identification tag added to the header. This along with protocol value and destination are us… |
| 1.3.6.1.4.1.2272.1.213.2.1.3 | ColumnrcIpsecSAHashAlgorithm | read-create | current | This object contains the hash algorithm used in this SA. The algorithms used are SHA1, AES_CBC, MD5 and SHA2 |
| 1.3.6.1.4.1.2272.1.213.2.1.4 | ColumnrcIpsecSAEncryptAlgorithm | read-create | current | This object contains the encryption algorithm used in this SA. The algorithms used are 3DES_CBC, AES128_CBC and AES_CTR |
| 1.3.6.1.4.1.2272.1.213.2.1.5 | ColumnrcIpsecSAAuthMethod | read-create | current | This object specifies authentication Method of the SA. It can be AH (Authentication Header) or ES (Encapsulated Security Payload). |
| 1.3.6.1.4.1.2272.1.213.2.1.6 | ColumnrcIpsecSAMode | read-create | current | This flag is used to switch between transport and tunnel mode. Transport mode is used to protect the upper layer protocols whereas tunnel mode is used to prote… |
| 1.3.6.1.4.1.2272.1.213.2.1.7 | ColumnrcIpsecSAKeyMode | read-create | current | This flag selects configuration mode of shared keys, manual or automatic. |
| 1.3.6.1.4.1.2272.1.213.2.1.8 | ColumnrcIpsecSAEncryptKeyName | read-create | current | Key Value for the Encryption Key. Maximum size is 64 |
| 1.3.6.1.4.1.2272.1.213.2.1.9 | ColumnrcIpsecSAHashKeyName | read-create | current | Key value for the Hash Key. Maximum size is 64. |
| 1.3.6.1.4.1.2272.1.213.2.1.10 | ColumnrcIpsecSAHashKeyLength | read-create | current | Number of bits used in the Hash key. The values are as follows: AES-XCBC-MAC - 32 MD5 - 32 SHA1 - 40 SHA2 - 64 |
| 1.3.6.1.4.1.2272.1.213.2.1.11 | ColumnrcIpsecSAEncryptKeyLength | read-create | current | Number of bits used in the Encryption key. The values are as follows: 3DES - 48 AES-CBC - 32, 48, 64 AES-CTR - 32 |
| 1.3.6.1.4.1.2272.1.213.2.1.12 | ColumnrcIpsecSALifetimeSeconds | read-create | current | The life time in seconds for a security association. |
| 1.3.6.1.4.1.2272.1.213.2.1.13 | ColumnrcIpsecSALifetimeKbytes | read-create | current | The traffic, in kilobytes, that can pass between IPSec peers using a given security association before that security association expires. |
| 1.3.6.1.4.1.2272.1.213.2.1.14 | ColumnrcIpsecSARowStatus | read-create | current | Used to create/delete entries in the rcIpsecSATable. |
| 1.3.6.1.4.1.2272.1.213.3 | TablercIpsecInterfacePolicyTable | not-accessible | current | This table is used to store the policy and interface details while linking the policy to an interface. This table contains the policy name, ifindex, direction … |
| 1.3.6.1.4.1.2272.1.213.3.1 | RowrcIpsecInterfacePolicyEntry | not-accessible | current | A Policy interface link table entry. |
| 1.3.6.1.4.1.2272.1.213.3.1.1 | ColumnrcIpsecInterfacePolicyName | not-accessible | current | This object contains name of the Ipsec policy that is to be linked with the interface. |
| 1.3.6.1.4.1.2272.1.213.3.1.2 | ColumnrcIpsecInterfacePolicyIfIndex | not-accessible | current | If index to which the policy is applied. |
| 1.3.6.1.4.1.2272.1.213.3.1.3 | ColumnrcIpsecInterfacePolicyIfEnabled | read-only | current | The value for this attribute is set when Ipsec is enabled on the interface and admin state of the policy is in enabled state |
| 1.3.6.1.4.1.2272.1.213.3.1.4 | ColumnrcIpsecInterfacePolicyIfDirection | read-create | current | This object contains the direction of traffic in the interface, where security needs to be applied. Whether its inBound, outBound or both Directions |
| 1.3.6.1.4.1.2272.1.213.3.1.5 | ColumnrcIpsecInterfacePolicyRowStatus | read-create | current | Used to create/delete entries in the rcIpsecInterfacePolicyTable. |
| 1.3.6.1.4.1.2272.1.213.4 | TablercIpsecOspf6VirtualLinkPolicyTable | not-accessible | current | This table is used to store all the attribute values under Ospf virtual link policy. This table contains the virtual link area id, neighbour id, SA name policy… |
| 1.3.6.1.4.1.2272.1.213.4.1 | RowrcIpsecOspf6VirtualLinkPolicyEntry | not-accessible | current | An OSPF virtual link Policy table entry. |
| 1.3.6.1.4.1.2272.1.213.4.1.1 | ColumnrcIpsecOspf6VirtualLinkPolicyAreaId | not-accessible | current | A 32-bit integer uniquely identifying the Ospf virtual link area. |
| 1.3.6.1.4.1.2272.1.213.4.1.2 | ColumnrcIpsecOspf6VirtualLinkPolicyNeighbor | not-accessible | current | A 32-bit integer uniquely identifying the Ospf virtual link neighbour. |
| 1.3.6.1.4.1.2272.1.213.4.1.3 | ColumnrcIpsecOspf6VirtualLinkPolicySAName | read-create | current | This object contains the security association linked to the virtual link. |
| 1.3.6.1.4.1.2272.1.213.4.1.4 | ColumnrcIpsecOspf6VirtualLinkPolicyAdminStatus | read-create | current | The flag is used to enable the policy created. |
| 1.3.6.1.4.1.2272.1.213.4.1.5 | ColumnrcIpsecOspf6VirtualLinkPolicyAction | read-create | current | The object contains a value that set the action of the IPSec Ospf virtual link policy, either to permit or drop. |
| 1.3.6.1.4.1.2272.1.213.4.1.6 | ColumnrcIpsecOspf6VirtualLinkPolicyDirection | read-create | current | The object indicates the policy direction for the virtual link. |
| 1.3.6.1.4.1.2272.1.213.4.1.7 | ColumnrcIpsecOspf6VirtualLinkPolicySrcAddressType | read-only | current | This object specifies the type of address field in thercIpsecOspf6VirtualLinkSrcAddress. Only IPv6 address types are supported for this release. |
| 1.3.6.1.4.1.2272.1.213.4.1.8 | ColumnrcIpsecOspf6VirtualLinkPolicySrcAddress | read-only | current | The source interface address to which the policy is added. |
| 1.3.6.1.4.1.2272.1.213.4.1.9 | ColumnrcIpsecOspf6VirtualLinkPolicyDstAddressType | read-only | current | This object specifies the type of address field in thercIpsecOspf6VirtualLinkDstAddress. Only IPv6 address types are supported for this release. |
| 1.3.6.1.4.1.2272.1.213.4.1.10 | ColumnrcIpsecOspf6VirtualLinkPolicyDstAddress | read-only | current | The destination interface address to which the policy is added. |
| 1.3.6.1.4.1.2272.1.213.4.1.11 | ColumnrcIpsecOspf6VirtualLinkPolicyLinkID | read-only | current | This object contains unique id for an ospf virtual link. |
| 1.3.6.1.4.1.2272.1.213.4.1.12 | ColumnrcIpsecOspf6VirtualLinkPolicyIfIndex | read-only | current | The interface If index to which Ospf virtual link the policy is added. |
| 1.3.6.1.4.1.2272.1.213.4.1.13 | ColumnrcIpsecOspf6VirtualLinkPolicyOperStatus | read-only | current | Operation status of the link, up or down. |
| 1.3.6.1.4.1.2272.1.213.4.1.14 | ColumnrcIpsecOspf6VirtualLinkPolicyRowStatus | read-create | current | Used to create/delete entries in the rcIpsecOspf6VirtualLinkPolicyTable. |
| 1.3.6.1.4.1.2272.1.213.5 | TablercIpsecPolicySALinkTable | not-accessible | current | This table is used to store the policy and security association details while linking the policy to a SA. This table contains the policy name, and the SA name … |
| 1.3.6.1.4.1.2272.1.213.5.1 | RowrcIpsecPolicySALinkEntry | not-accessible | current | A Policy interface link table entry. |
| 1.3.6.1.4.1.2272.1.213.5.1.1 | ColumnrcIpsecPolicySALinkPolicyName | not-accessible | current | This object contains name of the Ipsec policy. |
| 1.3.6.1.4.1.2272.1.213.5.1.2 | ColumnrcIpsecPolicySALinkSAName | not-accessible | current | This object contains name of the Security Association. |
| 1.3.6.1.4.1.2272.1.213.5.1.3 | ColumnrcIpsecPolicySALinkRowStatus | read-create | current | Used to create/delete entries in the rcIpsecPolicySALinkTable. |
| 1.3.6.1.4.1.2272.1.213.6 | TablercIpsecStatisticsTable | not-accessible | current | This contains the IPSec statistics / counter values on the switch level for all the IPSec enabled interfaces. |
| 1.3.6.1.4.1.2272.1.213.6.1 | RowrcIpsecStatisticsEntry | not-accessible | current | An Ipsec stats table entry. |
| 1.3.6.1.4.1.2272.1.213.6.1.1 | ColumnrcIpsecStatisticsIfIndex | not-accessible | current | Interface If index for which the statistics is captured for this interface. |
| 1.3.6.1.4.1.2272.1.213.6.1.2 | ColumnrcIpsecStatisticsInSuccesses | read-only | current | The total number of ingress packets successfully carried on IPSec for this interface. |
| 1.3.6.1.4.1.2272.1.213.6.1.3 | ColumnrcIpsecStatisticsInSPViolations | read-only | current | The total number of ingress packets discarded by IPSec if security policy violation since boot time for this interface. |
| 1.3.6.1.4.1.2272.1.213.6.1.4 | ColumnrcIpsecStatisticsInNotEnoughMemories | read-only | current | The total number of inbound packets discarded by IPSec if not enough memory available since boot time for this interface. |
| 1.3.6.1.4.1.2272.1.213.6.1.5 | ColumnrcIpsecStatisticsInAHESPReplays | read-only | current | The total number of inbound packets discarded by IPSec if AH replay check failed since boot time for this interface. |
| 1.3.6.1.4.1.2272.1.213.6.1.6 | ColumnrcIpsecStatisticsInESPReplays | read-only | current | The total number of inbound packets discarded by IPSec if ESP replay check failed since boot time for this interface. |
| 1.3.6.1.4.1.2272.1.213.6.1.7 | ColumnrcIpsecStatisticsInAHFailures | read-only | current | The total number of inbound packets discarded by IPSec if AH authentication check failed since boot time for this interface. |
| 1.3.6.1.4.1.2272.1.213.6.1.8 | ColumnrcIpsecStatisticsInESPFailures | read-only | current | The total number of inbound packets discarded by IPSec if ESP authentication check failed since boot time for this interface. |
| 1.3.6.1.4.1.2272.1.213.6.1.9 | ColumnrcIpsecStatisticsOutSuccesses | read-only | current | The total number of outbound packets successfully carried on IPSec since boot time for this interface. |
| 1.3.6.1.4.1.2272.1.213.6.1.10 | ColumnrcIpsecStatisticsOutSPViolations | read-only | current | The total number of outbound packets discarded by IPSec if security policy violation since boot time for this interface. |
| 1.3.6.1.4.1.2272.1.213.6.1.11 | ColumnrcIpsecStatisticsOutNotEnoughMemories | read-only | current | The total number of outbound packets discarded by IPSec if not enough memory available since boot time for this interface. |
| 1.3.6.1.4.1.2272.1.213.6.1.12 | ColumnrcIpsecStatisticsgeneralError | read-only | current | The total number of general occurs since boot time for this interface. |
| 1.3.6.1.4.1.2272.1.213.6.1.13 | ColumnrcIpsecStatisticsInAHSuccesses | read-only | current | The total number of inbound packets carried by IPSec if AH authentication succeeded since boot time for this interface. |
| 1.3.6.1.4.1.2272.1.213.6.1.14 | ColumnrcIpsecStatisticsOutAHSuccesses | read-only | current | The total number of outbound packets carried by IPSec if AH authentication succeeded since boot time for this interface. |
| 1.3.6.1.4.1.2272.1.213.6.1.15 | ColumnrcIpsecStatisticsInESPSuccesses | read-only | current | The total number of inbound packets carried by IPSec if ESP authentication succeeded since boot time for this interface. |
| 1.3.6.1.4.1.2272.1.213.6.1.16 | ColumnrcIpsecStatisticsOutESPSuccesses | read-only | current | The total number of outbound packets carried by IPSec if ESP authentication succeeded since boot time for this interface. |
| 1.3.6.1.4.1.2272.1.213.6.1.17 | ColumnrcIpsecStatisticsOutKBytes | read-only | current | The total number of outbound packets greater than 1 KB for this interface. |
| 1.3.6.1.4.1.2272.1.213.6.1.18 | ColumnrcIpsecStatisticsOutBytes | read-only | current | The total number of outbound byte sized packets for this interface |
| 1.3.6.1.4.1.2272.1.213.6.1.19 | ColumnrcIpsecStatisticsInKBytes | read-only | current | The total number of inbound packets greater than 1 KB for this interface. |
| 1.3.6.1.4.1.2272.1.213.6.1.20 | ColumnrcIpsecStatisticsInBytes | read-only | current | The total number of inbound byte sized packets for this interface. |
| 1.3.6.1.4.1.2272.1.213.6.1.21 | ColumnrcIpsecStatisticsTotalPacketsProcessed | read-only | current | The total number of packets processed since boot time for this interface. |
| 1.3.6.1.4.1.2272.1.213.6.1.22 | ColumnrcIpsecStatisticsTotalPacketsByPassed | read-only | current | The total number of packets bypassed since boot time for this interface. |
| 1.3.6.1.4.1.2272.1.213.6.1.23 | ColumnrcIpsecStatisticsOutAHFailures | read-only | current | The total number of outbound packets discarded by IPSec if AH authentication check failed since boot time for this interface. |
| 1.3.6.1.4.1.2272.1.213.6.1.24 | ColumnrcIpsecStatisticsOutESPFailures | read-only | current | The total number of outbound packets discarded by IPSec if ESP authentication check failed since boot time for this interface. |
| 1.3.6.1.4.1.2272.1.213.6.1.25 | ColumnrcIpsecStatisticsInMD5Hmacs | read-only | current | The total number of inbound HMAC MD5 occurrences since boot time for this interface. |
| 1.3.6.1.4.1.2272.1.213.6.1.26 | ColumnrcIpsecStatisticsInSHA1Hmacs | read-only | current | The total number of inbound HMAC SHA1 occurrences since boot time for this interface. |
| 1.3.6.1.4.1.2272.1.213.6.1.27 | ColumnrcIpsecStatisticsInAESXCBCs | read-only | current | The total number of inbound AES XCBC MAC occurrences since boot time for this interface. |
| 1.3.6.1.4.1.2272.1.213.6.1.28 | ColumnrcIpsecStatisticsInAnyNullAuth | read-only | current | Total number of inbound packets without any Authentication algorithm for this interface. |
| 1.3.6.1.4.1.2272.1.213.6.1.29 | ColumnrcIpsecStatisticsIn3DESCBCs | read-only | current | The total number of inbound Triple DES CBC occurrences since boot time for this interface. |
| 1.3.6.1.4.1.2272.1.213.6.1.30 | ColumnrcIpsecStatisticsInAESCBCs | read-only | current | The total number of inbound AES CBC occurrences since boot time for this interface. |
| 1.3.6.1.4.1.2272.1.213.6.1.31 | ColumnrcIpsecStatisticsInAESCTRs | read-only | current | The total number of outbound DES CBC occurrences since boot time for this interface. |
| 1.3.6.1.4.1.2272.1.213.6.1.32 | ColumnrcIpsecStatisticsInAnyNullEncrypt | read-only | current | Total number of inbound packets without any Encryption algorithm for this interface. |
| 1.3.6.1.4.1.2272.1.213.6.1.33 | ColumnrcIpsecStatisticsOutMD5Hmacs | read-only | current | The total number of outbound HMAC MD5 occurrences since boot time for this interface. |
| 1.3.6.1.4.1.2272.1.213.6.1.34 | ColumnrcIpsecStatisticsOutSHA1Hmacs | read-only | current | The total number of outbound HMAC SHA1 occurrences since boot time for this interface. |
| 1.3.6.1.4.1.2272.1.213.6.1.35 | ColumnrcIpsecStatisticsOutAESXCBCs | read-only | current | The total number of outbound AES XCBC MAC occurrences since boot time for this interface. |
| 1.3.6.1.4.1.2272.1.213.6.1.36 | ColumnrcIpsecStatisticsOutInAnyNullAuth | read-only | current | Total number of packets without any Authentication algorithm for this interface. |
| 1.3.6.1.4.1.2272.1.213.6.1.37 | ColumnrcIpsecStatisticsOut3DESCBCs | read-only | current | The total number of outbound Triple DES CBC occurrences since boot time for this interface. |
| 1.3.6.1.4.1.2272.1.213.6.1.38 | ColumnrcIpsecStatisticsOutAESCBCs | read-only | current | The total number of outbound AES CBC occurrences since boot time for this interface. |
| 1.3.6.1.4.1.2272.1.213.6.1.39 | ColumnrcIpsecStatisticsOutAESCTRs | read-only | current | The total number of outbound DES CBC occurrence since boot time for this interface. |
| 1.3.6.1.4.1.2272.1.213.6.1.40 | ColumnrcIpsecStatisticsOutInAnyNullEncrypt | read-only | current | Total number of packets without any Encryption algorithm for this interface. |
| 1.3.6.1.4.1.2272.1.213.7 | NodercIpsecGlobalStatisticsScalars | |||
| 1.3.6.1.4.1.2272.1.213.7.1 | ScalarrcIpsecGlobalStatisticsInSuccesses | read-only | current | The total number of ingress packets successfully carried on IPSec. |
| 1.3.6.1.4.1.2272.1.213.7.2 | ScalarrcIpsecGlobalStatisticsInSPViolations | read-only | current | The total number of ingress packets discarded by IPSec if security policy violation since boot time. |
| 1.3.6.1.4.1.2272.1.213.7.3 | ScalarrcIpsecGlobalStatisticsInNotEnoughMemories | read-only | current | The total number of inbound packets discarded by IPSec if not enough memory available since boot time. |
| 1.3.6.1.4.1.2272.1.213.7.4 | ScalarrcIpsecGlobalStatisticsInAHESPReplays | read-only | current | The total number of inbound packets discarded by IPSec if AH replay check failed since boot time. |
| 1.3.6.1.4.1.2272.1.213.7.5 | ScalarrcIpsecGlobalStatisticsInESPReplays | read-only | current | The total number of inbound packets discarded by IPSec if ESP replay check failed since boot time. |
| 1.3.6.1.4.1.2272.1.213.7.6 | ScalarrcIpsecGlobalStatisticsInAHFailures | read-only | current | The total number of inbound packets discarded by IPSec if AH authentication check failed since boot time. |
| 1.3.6.1.4.1.2272.1.213.7.7 | ScalarrcIpsecGlobalStatisticsInESPFailures | read-only | current | The total number of inbound packets discarded by IPSec if ESP authentication check failed since boot time. |
| 1.3.6.1.4.1.2272.1.213.7.8 | ScalarrcIpsecGlobalStatisticsOutSuccesses | read-only | current | The total number of outbound packets successfully carried on IPSec since boot time. |
| 1.3.6.1.4.1.2272.1.213.7.9 | ScalarrcIpsecGlobalStatisticsOutSPViolations | read-only | current | The total number of outbound packets discarded by IPSec if security policy violation since boot time. |
| 1.3.6.1.4.1.2272.1.213.7.10 | ScalarrcIpsecGlobalStatisticsOutNotEnoughMemories | read-only | current | The total number of outbound packets discarded by IPSec if not enough memory available since boot time. |
| 1.3.6.1.4.1.2272.1.213.7.11 | ScalarrcIpsecGlobalStatisticsgeneralError | read-only | current | The total number of general occurs since boot time |
| 1.3.6.1.4.1.2272.1.213.7.12 | ScalarrcIpsecGlobalStatisticsInAHSuccesses | read-only | current | The total number of inbound packets carried by IPSec if AH authentication succeeded since boot time. |
| 1.3.6.1.4.1.2272.1.213.7.13 | ScalarrcIpsecGlobalStatisticsOutAHSuccesses | read-only | current | The total number of outbound packets carried by IPSec if AH authentication succeeded since boot time. |
| 1.3.6.1.4.1.2272.1.213.7.14 | ScalarrcIpsecGlobalStatisticsInESPSuccesses | read-only | current | The total number of inbound packets carried by IPSec if ESP authentication succeeded since boot time. |
| 1.3.6.1.4.1.2272.1.213.7.15 | ScalarrcIpsecGlobalStatisticsOutESPSuccesses | read-only | current | The total number of outbound packets carried by IPSec if ESP authentication succeeded since boot time. |
| 1.3.6.1.4.1.2272.1.213.7.16 | ScalarrcIpsecGlobalStatisticsOutKBytes | read-only | current | The total number of outbound packets greater than 1 KB. |
| 1.3.6.1.4.1.2272.1.213.7.17 | ScalarrcIpsecGlobalStatisticsOutBytes | read-only | current | The total number of outbound byte sized packets |
| 1.3.6.1.4.1.2272.1.213.7.18 | ScalarrcIpsecGlobalStatisticsInKBytes | read-only | current | The total number of inbound packets greater than 1 KB. |
| 1.3.6.1.4.1.2272.1.213.7.19 | ScalarrcIpsecGlobalStatisticsInBytes | read-only | current | The total number of inbound byte sized packets. |
| 1.3.6.1.4.1.2272.1.213.7.20 | ScalarrcIpsecGlobalStatisticsTotalPacketsProcessed | read-only | current | The total number of packets processed since boot time. |
| 1.3.6.1.4.1.2272.1.213.7.21 | ScalarrcIpsecGlobalStatisticsTotalPacketsByPassed | read-only | current | The total number of packets bypassed since boot time. |
| 1.3.6.1.4.1.2272.1.213.7.22 | ScalarrcIpsecGlobalStatisticsOutAHFailures | read-only | current | The total number of outbound packets discarded by IPSec if AH authentication check failed since boot time. |
| 1.3.6.1.4.1.2272.1.213.7.23 | ScalarrcIpsecGlobalStatisticsOutESPFailures | read-only | current | The total number of outbound packets discarded by IPSec if ESP authentication check failed since boot time. |
| 1.3.6.1.4.1.2272.1.213.7.24 | ScalarrcIpsecGlobalStatisticsInMD5Hmacs | read-only | current | The total number of inbound HMAC MD5 occurrences since boot time. |
| 1.3.6.1.4.1.2272.1.213.7.25 | ScalarrcIpsecGlobalStatisticsInSHA1Hmacs | read-only | current | The total number of inbound HMAC SHA1 occurrences since boot time. |
| 1.3.6.1.4.1.2272.1.213.7.26 | ScalarrcIpsecGlobalStatisticsInAESXCBCs | read-only | current | The total number of inbound AES XCBC MAC occurrences since boot time. |
| 1.3.6.1.4.1.2272.1.213.7.27 | ScalarrcIpsecGlobalStatisticsInAnyNullAuth | read-only | current | Total number of inbound packets without any Authentication algorithm. |
| 1.3.6.1.4.1.2272.1.213.7.28 | ScalarrcIpsecGlobalStatisticsIn3DESCBCs | read-only | current | The total number of inbound Triple DES CBC occurrences since boot time. |
| 1.3.6.1.4.1.2272.1.213.7.29 | ScalarrcIpsecGlobalStatisticsInAESCBCs | read-only | current | The total number of inbound AES CBC occurrences since boot time. |
| 1.3.6.1.4.1.2272.1.213.7.30 | ScalarrcIpsecGlobalStatisticsInAESCTRs | read-only | current | The total number of outbound DES CBC occurrences since boot time. |
| 1.3.6.1.4.1.2272.1.213.7.31 | ScalarrcIpsecGlobalStatisticsInAnyNullEncrypt | read-only | current | Total number of inbound packets without any Encryption algorithm |
| 1.3.6.1.4.1.2272.1.213.7.32 | ScalarrcIpsecGlobalStatisticsOutMD5Hmacs | read-only | current | The total number of outbound HMAC MD5 occurrences since boot time. |
| 1.3.6.1.4.1.2272.1.213.7.33 | ScalarrcIpsecGlobalStatisticsOutSHA1Hmacs | read-only | current | The total number of outbound HMAC SHA1 occurrences since boot time. |
| 1.3.6.1.4.1.2272.1.213.7.34 | ScalarrcIpsecGlobalStatisticsOutAESXCBCs | read-only | current | The total number of outbound AES XCBC MAC occurrences since boot time. |
| 1.3.6.1.4.1.2272.1.213.7.35 | ScalarrcIpsecGlobalStatisticsOutInAnyNullAuth | read-only | current | Total number of outbound packets without any Authentication algorithm |
| 1.3.6.1.4.1.2272.1.213.7.36 | ScalarrcIpsecGlobalStatisticsOut3DESCBCs | read-only | current | The total number of outbound Triple DES CBC occurrences since boot time. |
| 1.3.6.1.4.1.2272.1.213.7.37 | ScalarrcIpsecGlobalStatisticsOutAESCBCs | read-only | current | The total number of outbound AES CBC occurrences since boot time. |
| 1.3.6.1.4.1.2272.1.213.7.38 | ScalarrcIpsecGlobalStatisticsOutAESCTRs | read-only | current | The total number of outbound DES CBC occurrence since boot time. |
| 1.3.6.1.4.1.2272.1.213.7.39 | ScalarrcIpsecGlobalStatisticsOutInAnyNullEncrypt | read-only | current | Total number of inbound packets without any Encryption algorithm |
| 1.3.6.1.4.1.2272.1.214 | NodercASG | |||
| 1.3.6.1.4.1.2272.1.214.1 | NodercASGGlobal | |||
| 1.3.6.1.4.1.2272.1.214.1.1 | ScalarrcASGGlobalEnableStatus | read-only | current | Display ASG enable/disable status |
| 1.3.6.1.4.1.2272.1.214.1.2 | TablercASGGlobalAccountsTable | not-accessible | current | Display ASG supported service login usernames and their permission levels |
| 1.3.6.1.4.1.2272.1.214.1.2.1 | RowrcASGGlobalAccountsEntry | not-accessible | current | Contains an entry of rcASGGlobalAccountsEntry which has username and persmission levels |
| 1.3.6.1.4.1.2272.1.214.1.2.1.1 | ColumnrcASGGlobalAccountsUsername | read-only | current | ASG supported username |
| 1.3.6.1.4.1.2272.1.214.1.2.1.2 | ColumnrcASGGlobalAccountsAccessLevel | read-only | current | permission level of the username |
| 1.3.6.1.4.1.2272.1.214.2 | NodercASGGlobalAFHeader | |||
| 1.3.6.1.4.1.2272.1.214.2.1 | ScalarrcASGGlobalAFHeaderAFID | read-only | current | Display lacfile/AF AF_ID |
| 1.3.6.1.4.1.2272.1.214.2.2 | ScalarrcASGGlobalAFHeaderProduct | read-only | current | Display lacfile/AF product name |
| 1.3.6.1.4.1.2272.1.214.2.3 | ScalarrcASGGlobalAFHeaderDateAndTime | read-only | current | Display lacfile/AF generated date and time |
| 1.3.6.1.4.1.2272.1.214.2.4 | ScalarrcASGGlobalAFHeaderRelease | read-only | current | Display lacfile/AF release version |
| 1.3.6.1.4.1.2272.1.215 | NodercMld | |||
| 1.3.6.1.4.1.2272.1.215.1 | NodercMldObjects | |||
| 1.3.6.1.4.1.2272.1.215.1.1 | TablercMldNewGroupTable | not-accessible | current | The (conceptual) table listing the multicast groups configured in the device. |
| 1.3.6.1.4.1.2272.1.215.1.1.1 | RowrcMldNewGroupEntry | not-accessible | current | An entry (conceptual row) representing an Mld group. |
| 1.3.6.1.4.1.2272.1.215.1.1.1.1 | ColumnrcMldNewGroupIpv6Address | not-accessible | current | Multicast Group Address that others want to join to. A group address can be the same for many incoming ports. |
| 1.3.6.1.4.1.2272.1.215.1.1.1.2 | ColumnrcMldNewGroupMembers | not-accessible | current | IP Address of a source that has sent group report wishing to join this group. |
| 1.3.6.1.4.1.2272.1.215.1.1.1.3 | ColumnrcMldNewGroupInPort | not-accessible | current | An unique value to identify a physical interface or a logical interface (VLAN), which has received Group reports from various sources. |
| 1.3.6.1.4.1.2272.1.215.1.1.1.4 | ColumnrcMldNewGroupExpiration | read-only | current | Time left before the group report expired on this port. Only one of this variable port. This variable is updated upon receiving a group report. |
| 1.3.6.1.4.1.2272.1.215.1.1.1.5 | ColumnrcMldNewGroupIfIndex | read-only | current | An unique value to identify a physical interface or a logical interface (VLAN), which has received Group reports from various sources. |
| 1.3.6.1.4.1.2272.1.215.1.2 | TablercMldInterfaceExtnTable | not-accessible | current | |
| 1.3.6.1.4.1.2272.1.215.1.2.1 | RowrcMldInterfaceExtnEntry | not-accessible | current | |
| 1.3.6.1.4.1.2272.1.215.1.2.1.1 | ColumnrcMldInterfaceExtnIfIndex | not-accessible | current | An unique value to identify a physical interface or a logical interface (VLAN) |
| 1.3.6.1.4.1.2272.1.215.1.2.1.2 | ColumnrcMldInterfaceExtnSnoopEnable | read-write | current | Enable snoop on interface |
| 1.3.6.1.4.1.2272.1.215.1.2.1.16 | ColumnrcMldInterfaceExtnFlushAction | read-write | current | MLD flush action |
| 1.3.6.1.4.1.2272.1.215.1.2.1.18 | ColumnrcMldInterfaceExtnSsmEnable | read-write | current | Enable SSM. |
| 1.3.6.1.4.1.2272.1.215.1.2.1.25 | ColumnrcMldInterfaceExtnNewQuerier | read-only | current | The address of the new MLD querier. |
| 1.3.6.1.4.1.2272.1.215.1.2.1.30 | ColumnrcMldInterfaceExtnDynamicDowngradeEnable | read-write | current | enable dynamic downgrade the MLD version when older version query message was received. |
| 1.3.6.1.4.1.2272.1.215.1.2.1.32 | ColumnrcMldInterfaceExtnOperVersion | read-only | current | The operational version of MLD which is running on this interface. |
| 1.3.6.1.4.1.2272.1.215.1.2.1.34 | ColumnrcMldInterfaceExtnMcastMode | read-only | current | MLD interface mode. |
| 1.3.6.1.4.1.2272.1.215.1.3 | NodercMldSsmGlobal | |||
| 1.3.6.1.4.1.2272.1.215.1.3.1 | ScalarrcMldSsmGlobalRangeGroup | read-only | current | If multicast group address & RangeMask == RangeGroup, then RangeGroup is in Ssm Range. Else it is not in the range. |
| 1.3.6.1.4.1.2272.1.215.1.3.2 | ScalarrcMldSsmGlobalRangeMask | read-only | current | Used with RangeGroup. |
| 1.3.6.1.4.1.2272.1.215.1.4 | TablercMldSnoopTraceTable | not-accessible | current | The table listing the multicast groups traversing the snoop enabled router |
| 1.3.6.1.4.1.2272.1.215.1.4.1 | RowrcMldSnoopTraceEntry | not-accessible | current | The entry listing the multicast groups traversing the snoop enabled router |
| 1.3.6.1.4.1.2272.1.215.1.4.1.1 | ColumnrcMldSnoopGrpAddr | not-accessible | current | Ip multicast address of group traversing the router |
| 1.3.6.1.4.1.2272.1.215.1.4.1.2 | ColumnrcMldSnoopSrcAddr | not-accessible | current | Ip source address of the multicast group address |
| 1.3.6.1.4.1.2272.1.215.1.4.1.3 | ColumnrcMldSnoopOutVlan | not-accessible | current | Egress vlan id for the multicast group |
| 1.3.6.1.4.1.2272.1.215.1.4.1.4 | ColumnrcMldSnoopInPort | read-only | current | Ingress port for the multicast group |
| 1.3.6.1.4.1.2272.1.215.1.4.1.5 | ColumnrcMldSnoopInVlan | read-only | current | Ingress vlan id for the multicast source |
| 1.3.6.1.4.1.2272.1.215.1.4.1.6 | ColumnrcMldSnoopOutPort | read-only | current | Egress port of the multicast group |
| 1.3.6.1.4.1.2272.1.215.1.4.1.7 | ColumnrcMldSnoopType | read-only | current | The port type on which the snoop entry is learnt |
| 1.3.6.1.4.1.2272.1.215.1.5 | TablercMldv2CacheTable | not-accessible | current | The (conceptual) table listing the MLDv2 specific data corresponding to each interface, port and multicast group pair on a Router. |
| 1.3.6.1.4.1.2272.1.215.1.5.1 | RowrcMldv2CacheEntry | not-accessible | current | An entry (conceptual row) representing an Mldv2 Group. |
| 1.3.6.1.4.1.2272.1.215.1.5.1.1 | ColumnrcMldv2CacheEntryGroupAddress | not-accessible | current | Multicast group Address that others want to join. A group address can be the same for many incoming ports. |
| 1.3.6.1.4.1.2272.1.215.1.5.1.2 | ColumnrcMldv2CacheEntryIfIndex | not-accessible | current | An unique value to identify a physical interface or a logical interface (VLAN), which has received Group reports from various sources. |
| 1.3.6.1.4.1.2272.1.215.1.5.1.3 | ColumnrcMldv2CacheEntryInPort | not-accessible | current | An unique value to identify a physical interface or a logical interface (VLAN), which has received Group reports from various sources. |
| 1.3.6.1.4.1.2272.1.215.1.5.1.5 | ColumnrcMldv2CacheEntryVersion1HostTimer | read-only | current | The time remaining until the local router will assume that there are no longer any MLD version 1 members on the IP subnet attached to this interface. This entr… |
| 1.3.6.1.4.1.2272.1.215.1.5.1.6 | ColumnrcMldv2CacheEntrySourceFilterMode | read-only | current | The current group state, applicable to MLDv2-compatible nodes. The value indicates whether the state is INCLUDE or EXCLUDE. |
| 1.3.6.1.4.1.2272.1.215.1.6 | TablercMldRouterSrcListTable | not-accessible | current | The (conceptual) table listing the Source List entries corresponding to each interface and multicast group pair on a Router. |
| 1.3.6.1.4.1.2272.1.215.1.6.1 | RowrcMldRouterSrcListEntry | not-accessible | current | An entry (conceptual row) representing an Mld Source. |
| 1.3.6.1.4.1.2272.1.215.1.6.1.1 | ColumnrcMldRouterSrcListGroupAddress | not-accessible | current | The IPv6 multicast group address for which this entry contains information. |
| 1.3.6.1.4.1.2272.1.215.1.6.1.2 | ColumnrcMldRouterSrcListIfIndex | not-accessible | current | The interface for which this entry contains information for an IP multicast group address. |
| 1.3.6.1.4.1.2272.1.215.1.6.1.3 | ColumnrcMldRouterSrcListInPort | not-accessible | current | An unique value to identify a physical interface or a logical interface (VLAN), which has received Group reports for this source. |
| 1.3.6.1.4.1.2272.1.215.1.6.1.4 | ColumnrcMldRouterSrcListHostAddress | not-accessible | current | The host address to which this entry corresponds. |
| 1.3.6.1.4.1.2272.1.215.1.6.1.5 | ColumnrcMldRouterSrcListMemberAddress | not-accessible | current | IPv6 Address of a member that has sent source specific report wishing to join this source. |
| 1.3.6.1.4.1.2272.1.215.1.6.1.6 | ColumnrcMldRouterSrcListExpire | read-only | current | This value indicates the relevance of the SrcList entry, whereby a non-zero value indicates this is an INCLUDE state value, and a zero value indicates this to … |
| 1.3.6.1.4.1.2272.1.215.1.6.1.7 | ColumnrcMldRouterSrcListMode | read-only | current | The current member state, applicable to MLDv2-compatible nodes. The value indicates whether the state is INCLUDE or EXCLUDE. |
| 1.3.6.1.4.1.2272.1.215.1.6.1.8 | ColumnrcMldRouterSrcListMemberExpire | read-only | current | This value indicates the time until the member for this source will expire |
| 1.3.6.1.4.1.2272.1.215.1.7 | TablercMldSenderTable | not-accessible | current | The (conceptual) table listing the multicast senders. |
| 1.3.6.1.4.1.2272.1.215.1.7.1 | RowrcMldSenderEntry | not-accessible | current | An entry (conceptual row) representing an MLD senser. |
| 1.3.6.1.4.1.2272.1.215.1.7.1.1 | ColumnrcMldSenderGrpAddr | not-accessible | current | IPv6 multicast group address. |
| 1.3.6.1.4.1.2272.1.215.1.7.1.2 | ColumnrcMldSenderIfIndex | not-accessible | current | Interface index of the sender. |
| 1.3.6.1.4.1.2272.1.215.1.7.1.3 | ColumnrcMldSenderMemberAddr | not-accessible | current | Ipv6 Host Address. |
| 1.3.6.1.4.1.2272.1.215.1.7.1.4 | ColumnrcMldSenderAction | read-write | current | none(1), flushEntry(2), flushGrp(3). |
| 1.3.6.1.4.1.2272.1.215.1.7.1.5 | ColumnrcMldSenderPort | read-only | current | Mld Sender port. |
| 1.3.6.1.4.1.2272.1.215.2 | NodercMldNotification | |||
| 1.3.6.1.4.1.2272.1.215.2.1 | ScalarrcMldNotificationInterfaceIfIndex | accessible-for-notify | current | The internetwork-layer interface value of the interface for which MLD is enabled. |
| 1.3.6.1.4.1.2272.1.215.2.2 | ScalarrcMldNotificationNewGroupIpv6Address | accessible-for-notify | current | Multicast Group Address that others want to join to. A group address can be the same for many incoming ports. |
| 1.3.6.1.4.1.2272.1.215.2.3 | ScalarrcMldNotificationNewGroupMembers | accessible-for-notify | current | IP Address of a source that has sent group report wishing to join this group. |
| 1.3.6.1.4.1.2272.1.215.2.4 | ScalarrcMldNotificationNewGroupInPort | accessible-for-notify | current | An unique value to identify a physical interface or a logical interface (VLAN), which has received Group reports from various sources. |
| 1.3.6.1.4.1.2272.1.215.3 | NodercMldGlobalGroup | |||
| 1.3.6.1.4.1.2272.1.215.3.1 | ScalarrcMldGenerateTrap | read-write | current | Enabling the MLD to generate trap. |
| 1.3.6.1.4.1.2272.1.215.3.2 | ScalarrcMldGenerateLog | read-write | current | Enabling the MLD to generate log. |
| 1.3.6.1.4.1.2272.1.216 | NodercMRouteIpv6 | |||
| 1.3.6.1.4.1.2272.1.216.1 | NodercMRouteIpv6Objects | |||
| 1.3.6.1.4.1.2272.1.216.1.1 | TablercMRouteIpv6Table | not-accessible | current | The (conceptual) table containing multicast routing information for IPv6 datagrams sent by particular sources to the IPv6 multicast groups known to this router. |
| 1.3.6.1.4.1.2272.1.216.1.1.1 | RowrcMRouteIpv6Entry | not-accessible | current | An entry (conceptual row) containing the multicast routing information for IPv6 datagrams from a particular source and addressed to a particular IPv6 multicast… |
| 1.3.6.1.4.1.2272.1.216.1.1.1.1 | ColumnrcMRouteIpv6Group | not-accessible | current | The IPv6 multicast group address for which this entry contains multicast routing information. |
| 1.3.6.1.4.1.2272.1.216.1.1.1.2 | ColumnrcMRouteIpv6Source | not-accessible | current | The network address which when combined with the corresponding value of rcMRouteIpv6SourceMask identifies the sources for which this entry contains multicast r… |
| 1.3.6.1.4.1.2272.1.216.1.1.1.3 | ColumnrcMRouteIpv6SourceMask | not-accessible | current | The network mask which when combined with the corresponding value of rcMRouteIpv6Source identifies the sources for which this entry contains multicast routing … |
| 1.3.6.1.4.1.2272.1.216.1.1.1.4 | ColumnrcMRouteIpv6UpstreamNeighbor | read-only | current | The address of the upstream neighbor (e.g., RPF neighbor) from which IPv6 datagrams from these sources to this multicast address are received. |
| 1.3.6.1.4.1.2272.1.216.1.1.1.5 | ColumnrcMRouteIpv6InIfIndex | read-only | current | The value of ifIndex for the interface on which IPv6 datagrams sent by these sources to this multicast address are received. A value of 0 indicates that datagr… |
| 1.3.6.1.4.1.2272.1.216.1.1.1.7 | ColumnrcMRouteIpv6ExpiryTime | read-only | current | The minimum amount of time remaining before this entry will be aged out. The value 0 indicates that the entry is not subject to aging. |
| 1.3.6.1.4.1.2272.1.216.1.1.1.11 | ColumnrcMRouteIpv6Protocol | read-only | current | The routing mechanism via which this route was learned. |
| 1.3.6.1.4.1.2272.1.216.1.2 | TablercMRouteIpv6NextHopTable | not-accessible | current | The (conceptual) table containing information on the next hops on outgoing interfaces for routing IPv6 multicast datagrams. Each entry is one of a list of next… |
| 1.3.6.1.4.1.2272.1.216.1.2.1 | RowrcMRouteIpv6NextHopEntry | not-accessible | current | An entry (conceptual row) in the list of next hops on outgoing interfaces to which IPv6 multicast datagrams from particular sources to a IPv6 multicast group a… |
| 1.3.6.1.4.1.2272.1.216.1.2.1.1 | ColumnrcMRouteIpv6NextHopGroup | not-accessible | current | The IPv6 multicast group for which this entry specifies a next hop on an outgoing interface. |
| 1.3.6.1.4.1.2272.1.216.1.2.1.2 | ColumnrcMRouteIpv6NextHopSource | not-accessible | current | The network address which when combined with the corresponding value of rcMRouteIpv6NextHopSourceMask identifies the sources for which this entry specifies a n… |
| 1.3.6.1.4.1.2272.1.216.1.2.1.3 | ColumnrcMRouteIpv6NextHopSourceMask | not-accessible | current | The network mask which when combined with the corresponding value of rcMRouteIpv6NextHopSource identifies the sources for which this entry specifies a next hop… |
| 1.3.6.1.4.1.2272.1.216.1.2.1.4 | ColumnrcMRouteIpv6NextHopIfIndex | not-accessible | current | The ifIndex value of the interface for the outgoing interface for this next hop. |
| 1.3.6.1.4.1.2272.1.216.1.2.1.5 | ColumnrcMRouteIpv6NextHopAddress | not-accessible | current | The address of the next hop specific to this entry. For most interfaces, this is identical to rcMRouteIpv6NextHopGroup. NBMA interfaces, however, may have mult… |
| 1.3.6.1.4.1.2272.1.216.1.2.1.6 | ColumnrcMRouteIpv6NextHopState | read-only | current | An indication of whether the outgoing interface and next hop represented by this entry is currently being used to forward IPv6 datagrams. The value 'forwarding… |
| 1.3.6.1.4.1.2272.1.216.1.2.1.8 | ColumnrcMRouteIpv6NextHopExpiryTime | read-only | current | The minimum amount of time remaining before this entry will be aged out. The value 0 indicates that the entry is not subject to aging. |
| 1.3.6.1.4.1.2272.1.216.1.2.1.9 | ColumnrcMRouteIpv6NextHopClosestMemberHops | read-only | current | The minimum number of hops between this router and any member of this IPv6 multicast group reached via this next hop on this outgoing interface. Any IPv6 multi… |
| 1.3.6.1.4.1.2272.1.216.1.2.1.10 | ColumnrcMRouteIpv6NextHopProtocol | read-only | current | The routing mechanism via which this next-hop was learned. |
| 1.3.6.1.4.1.2272.1.216.1.3 | TablercMRouteIpv6InterfaceTable | not-accessible | current | The (conceptual) table containg multicast routing information specific to interfaces. |
| 1.3.6.1.4.1.2272.1.216.1.3.1 | RowrcMRouteIpv6InterfaceEntry | not-accessible | current | An entry (conceptual row) containing the multicast routing information for a particular interface. |
| 1.3.6.1.4.1.2272.1.216.1.3.1.1 | ColumnrcMRouteIpv6InterfaceIfIndex | not-accessible | current | The ifIndex value of the interface for which this entry contains information. |
| 1.3.6.1.4.1.2272.1.216.1.3.1.2 | ColumnrcMRouteIpv6InterfaceTtl | read-only | current | The datagram TTL threshold for the interface. Any IPv6 multicast datagrams with a TTL less than this threshold will not be forwarded out the interface. The def… |
| 1.3.6.1.4.1.2272.1.216.1.3.1.3 | ColumnrcMRouteIpv6InterfaceProtocol | read-only | current | The routing protocol running on this interface. |
| 1.3.6.1.4.1.2272.1.216.2 | NodercMRouteIpv6Statistics | |||
| 1.3.6.1.4.1.2272.1.216.2.1 | NodercMRouteIpv6UsageGlobal | |||
| 1.3.6.1.4.1.2272.1.216.2.1.1 | ScalarrcMRouteIpv6IngressRecInUse | read-only | current | Used to get the IPv6 Ingress Record Usage in the switch. (S-G usage). |
| 1.3.6.1.4.1.2272.1.216.2.1.2 | ScalarrcMRouteIpv6EgressRecInUse | read-only | current | Used to get the IPv6 Egress Record Usage in the switch (pepstream count). |
| 1.3.6.1.4.1.2272.1.216.2.1.3 | ScalarrcMRouteIpv6IngressThreshold | read-write | current | Used to get the threshold count for IPv6 Ingress records. |
| 1.3.6.1.4.1.2272.1.216.2.1.4 | ScalarrcMRouteIpv6EgressThreshold | read-write | current | Used to get threshold count for IPv6 Egress records. |
| 1.3.6.1.4.1.2272.1.216.2.1.5 | ScalarrcMRouteIpv6SendTrapAndLog | read-write | current | A means of alerting the user. If this bool is set, a message will be send to console and also a trap will be sent. |
| 1.3.6.1.4.1.2272.1.216.2.1.6 | ScalarrcMRouteIpv6SendTrapOnly | read-write | current | A means of alerting the user. If this bool is set, a trap will be sent. |
| 1.3.6.1.4.1.2272.1.216.2.1.7 | ScalarrcMRouteIpv6LogMsgOnly | read-write | current | A means of alerting the user.If this bool is set, a message will be sent to console. |
| 1.3.6.1.4.1.2272.1.216.2.2 | NodercMRouteIpv6Scalars | |||
| 1.3.6.1.4.1.2272.1.216.2.2.1 | ScalarrcMRouteIpv6StatsEnabled | read-write | current | The enabled status of IPv6 Multicast statistics. |
| 1.3.6.1.4.1.2272.1.216.2.2.2 | ScalarrcMRouteIpv6StatsClear | read-write | current | Clear ipv6 mroute stats. |
| 1.3.6.1.4.1.2272.1.216.2.3 | TablercMRouteIpv6StatsTable | not-accessible | current | the table containing IPv6 Multicast statistics. |
| 1.3.6.1.4.1.2272.1.216.2.3.1 | RowrcMRouteIpv6StatsEntry | not-accessible | current | An entry containing the ipv6 multicast statistics information for the specific group ipv6 address. |
| 1.3.6.1.4.1.2272.1.216.2.3.1.1 | ColumnrcMRouteIpv6StatsGroupAddress | not-accessible | current | the IPv6 multicast group address for which this entry contains ipv6 multicast statistics. |
| 1.3.6.1.4.1.2272.1.216.2.3.1.2 | ColumnrcMRouteIpv6StatsSourceCount | read-only | current | The number of sources corresponding to the specific group and vrf. |
| 1.3.6.1.4.1.2272.1.216.2.3.1.3 | ColumnrcMRouteIpv6StatsPkts | read-only | current | The total number of frames that are processed corresponding to the specific group and vrf. |
| 1.3.6.1.4.1.2272.1.216.2.3.1.4 | ColumnrcMRouteIpv6StatsBytes | read-only | current | The total number of bytes that are processed corresponding to the specific group and vrf. |
| 1.3.6.1.4.1.2272.1.216.2.3.1.5 | ColumnrcMRouteIpv6StatsAverageSizePerPkt | read-only | current | The average length of packets that are processed corresponding to the specific group and vrf. |
| 1.3.6.1.4.1.2272.1.217 | NodercPimIpv6 | |||
| 1.3.6.1.4.1.2272.1.217.1 | NodercPimIpv6Objects | |||
| 1.3.6.1.4.1.2272.1.217.1.1 | ScalarrcPimIpv6JoinPruneInterval | read-write | current | The default interval at which periodic PIM-SM IPv6 Join/Prune messages are to be sent. |
| 1.3.6.1.4.1.2272.1.217.1.2 | TablercPimIpv6InterfaceTable | not-accessible | current | The (conceptual) table listing the router's PIM IPv6 interfaces. IGMP and PIM are enabled on all IPv6 interfaces listed in this table. |
| 1.3.6.1.4.1.2272.1.217.1.2.1 | RowrcPimIpv6InterfaceEntry | not-accessible | current | An entry (conceptual row) in the rcPimIpv6InterfaceTable. |
| 1.3.6.1.4.1.2272.1.217.1.2.1.1 | ColumnrcPimIpv6InterfaceIfIndex | not-accessible | current | The ifIndex value of this PIM interface. |
| 1.3.6.1.4.1.2272.1.217.1.2.1.2 | ColumnrcPimIpv6InterfaceAddress | read-only | current | The IPv6 address of the PIM interface. |
| 1.3.6.1.4.1.2272.1.217.1.2.1.3 | ColumnrcPimIpv6InterfaceNetMask | read-only | current | The network mask for the IPv6 address of the PIM interface. |
| 1.3.6.1.4.1.2272.1.217.1.2.1.4 | ColumnrcPimIpv6InterfaceMode | read-only | current | The configured mode of this PIM interface. |
| 1.3.6.1.4.1.2272.1.217.1.2.1.5 | ColumnrcPimIpv6InterfaceDR | read-only | current | The Designated Router on this PIM interface. For point- to-point interfaces, this object has the value ::. |
| 1.3.6.1.4.1.2272.1.217.1.2.1.6 | ColumnrcPimIpv6InterfaceHelloInterval | read-create | current | The frequency at which PIM Hello messages are transmitted on this interface. |
| 1.3.6.1.4.1.2272.1.217.1.2.1.7 | ColumnrcPimIpv6InterfaceRowStatus | read-create | current | The status of this entry. Creating the entry enables PIM on the interface; destroying the entry disables PIM on the interface. |
| 1.3.6.1.4.1.2272.1.217.1.2.1.8 | ColumnrcPimIpv6InterfaceJoinPruneInterval | read-create | current | The frequency at which PIM Join/Prune messages are transmitted on this PIM interface. The default value of this object is the rcPimIpv6JoinPruneInterval. |
| 1.3.6.1.4.1.2272.1.217.1.3 | TablercPimIpv6NeighborTable | not-accessible | current | The (conceptual) table listing the router's PIM IPv6 neighbors. |
| 1.3.6.1.4.1.2272.1.217.1.3.1 | RowrcPimIpv6NeighborEntry | not-accessible | current | An entry (conceptual row) in the rcPimIpv6NeighborTable. |
| 1.3.6.1.4.1.2272.1.217.1.3.1.1 | ColumnrcPimIpv6NeighborIfIndex | not-accessible | current | The value of ifIndex for the interface used to reach this PIM neighbor. |
| 1.3.6.1.4.1.2272.1.217.1.3.1.2 | ColumnrcPimIpv6NeighborAddress | not-accessible | current | The IPv6 address of the PIM neighbor for which this entry contains information. |
| 1.3.6.1.4.1.2272.1.217.1.3.1.3 | ColumnrcPimIpv6NeighborUpTime | read-only | current | The time since this PIM neighbor (last) became a neighbor of the local router. |
| 1.3.6.1.4.1.2272.1.217.1.3.1.4 | ColumnrcPimIpv6NeighborExpiryTime | read-only | current | The minimum time remaining before this PIM neighbor will be aged out. |
| 1.3.6.1.4.1.2272.1.217.1.4 | TablercPimIpv6RPSetTable | not-accessible | current | The (conceptual) table listing PIM information for candidate Rendezvous Points (RPs) for IPv6 multicast groups. When the local router is the BSR, this informat… |
| 1.3.6.1.4.1.2272.1.217.1.4.1 | RowrcPimIpv6RPSetEntry | not-accessible | current | An entry (conceptual row) in the rcPimIpv6RPSetTable. |
| 1.3.6.1.4.1.2272.1.217.1.4.1.1 | ColumnrcPimIpv6RPSetComponent | not-accessible | current | A number uniquely identifying the component. Each protocol instance connected to a separate domain should have a different index value. |
| 1.3.6.1.4.1.2272.1.217.1.4.1.2 | ColumnrcPimIpv6RPSetGroupAddress | not-accessible | current | The IPv6 multicast group address which, when combined with rcPimIpv6RPSetGroupMask, gives the group prefix for which this entry contains information about the … |
| 1.3.6.1.4.1.2272.1.217.1.4.1.3 | ColumnrcPimIpv6RPSetGroupMask | not-accessible | current | The multicast group address mask which, when combined with rcPimIpv6RPSetGroupAddress, gives the group prefix for which this entry contains information about t… |
| 1.3.6.1.4.1.2272.1.217.1.4.1.4 | ColumnrcPimIpv6RPSetAddress | not-accessible | current | The IPv6 address of the Candidate-RP. |
| 1.3.6.1.4.1.2272.1.217.1.4.1.5 | ColumnrcPimIpv6RPSetHoldTime | read-only | current | The holdtime of a Candidate-RP. If the local router is not the BSR, this value is 0. |
| 1.3.6.1.4.1.2272.1.217.1.4.1.6 | ColumnrcPimIpv6RPSetExpiryTime | read-only | current | The minimum time remaining before the Candidate-RP will be declared down. If the local router is not the BSR, this value is 0. |
| 1.3.6.1.4.1.2272.1.217.1.7 | TablercPimIpv6NbrSecAddressTable | not-accessible | current | The (conceptual) table listing the secondary addresses advertised by each PIM neighbor (on a subset of the rows of the rcPimIpv6NeighborTable defined). |
| 1.3.6.1.4.1.2272.1.217.1.7.1 | RowrcPimIpv6NbrSecAddressEntry | not-accessible | current | An entry (conceptual row) in the rcPimIpv6NbrSecAddressTable. |
| 1.3.6.1.4.1.2272.1.217.1.7.1.1 | ColumnrcPimIpv6NbrSecAddressIfIndex | not-accessible | current | The value of ifIndex for the interface used to reach this PIM neighbor. |
| 1.3.6.1.4.1.2272.1.217.1.7.1.2 | ColumnrcPimIpv6NbrSecAddressType | not-accessible | current | The address type of this PIM neighbor. |
| 1.3.6.1.4.1.2272.1.217.1.7.1.3 | ColumnrcPimIpv6NbrSecAddressPrimary | not-accessible | current | The primary IP address of this PIM neighbor. The InetAddressType is given by the rcPimIpv6NbrSecAddressType object. |
| 1.3.6.1.4.1.2272.1.217.1.7.1.4 | ColumnrcPimIpv6NbrSecAddress | read-only | current | The secondary IP address of this PIM neighbor. The InetAddressType is given by the pimNbrSecAddressType object. |
| 1.3.6.1.4.1.2272.1.218 | NodercVxlan | |||
| 1.3.6.1.4.1.2272.1.218.1 | ScalarrcVxlanVtepSourceIp | read-write | current | Vxlan tunnel end point source IP address. |
| 1.3.6.1.4.1.2272.1.218.2 | ScalarrcVxlanVtepVrf | read-write | current | Vrf associated with vtep source IP |
| 1.3.6.1.4.1.2272.1.218.3 | TablercVxlanVtepTable | not-accessible | current | The table for vxlan tunnel end point. |
| 1.3.6.1.4.1.2272.1.218.3.1 | RowrcVxlanVtepEntry | not-accessible | current | Entry contains the configuration information about the vxlan tunnel end point |
| 1.3.6.1.4.1.2272.1.218.3.1.1 | ColumnrcVxlanVtepId | not-accessible | current | An index used to uniquely identify this vxlan tunnel end point. |
| 1.3.6.1.4.1.2272.1.218.3.1.2 | ColumnrcVxlanVtepIpAddr | read-create | current | A value that uniquely identifies the destination IP address of vtep tunnel |
| 1.3.6.1.4.1.2272.1.218.3.1.3 | ColumnrcVxlanVtepName | read-create | current | An administratively-assigned name for this vxlan tunnel end point. By default name will be VTEP-<#ID>-<IP address> |
| 1.3.6.1.4.1.2272.1.218.3.1.4 | ColumnrcVxlanVtepRowStatus | read-create | current | Used to create/delete vxlan tunnel end point |
| 1.3.6.1.4.1.2272.1.218.3.1.5 | ColumnrcVxlanVtepNextHopVrfName | read-only | current | Next hop vrf name to reach remote vtep |
| 1.3.6.1.4.1.2272.1.218.4 | TablercVxlanVnidTable | not-accessible | current | A Vxlan vnid table. |
| 1.3.6.1.4.1.2272.1.218.4.1 | RowrcVxlanVnidEntry | not-accessible | current | Entry containing vnid and i-sid information for a particular vxlan tunnel end point. |
| 1.3.6.1.4.1.2272.1.218.4.1.1 | ColumnrcVxlanVnidIdentifier | not-accessible | current | A value that uniquely identifies the vnid of this vxlan tunnel end point. |
| 1.3.6.1.4.1.2272.1.218.4.1.2 | ColumnrcVxlanVnidIsid | read-create | current | A value that uniquely identifies the i-sid of this Vxlan end point. |
| 1.3.6.1.4.1.2272.1.218.4.1.3 | ColumnrcVxlanVnidRowStatus | read-create | current | Row status for create/delete. |
| 1.3.6.1.4.1.2272.1.218.4.1.4 | ColumnrcVxlanVnidAction | read-create | current | Vnid related actions. |
| 1.3.6.1.4.1.2272.1.218.5 | TablercVxlanVnidEndPointTable | not-accessible | current | Attributes of vnid table at vxlan tunnel end point. |
| 1.3.6.1.4.1.2272.1.218.5.1 | RowrcVxlanVnidEndPointEntry | not-accessible | current | Entry containing configuration information for a particular vnid at vxlan tunnel end point. |
| 1.3.6.1.4.1.2272.1.218.5.1.1 | ColumnrcVxlanVnidEndPointVnid | not-accessible | current | A value that uniquely identifies the vnid of this vxlan tunnel end point. |
| 1.3.6.1.4.1.2272.1.218.5.1.2 | ColumnrcVxlanVnidEndPointVtepId | not-accessible | current | vxlan tunnel end point id associated with given vnid |
| 1.3.6.1.4.1.2272.1.218.5.1.3 | ColumnrcVxlanVnidEndPointIsid | read-only | current | A value that uniquely identifies the i-sid of this vxlan tunnel end point. |
| 1.3.6.1.4.1.2272.1.218.5.1.4 | ColumnrcVxlanVnidEndPointRowStatus | read-create | current | Row status for create/delete. |
| 1.3.6.1.4.1.2272.1.218.6 | TablercVxlanVtepNextHopTable | not-accessible | current | The table to store nexthop information for the remote vtep |
| 1.3.6.1.4.1.2272.1.218.6.1 | RowrcVxlanVtepNextHopEntry | not-accessible | current | Entry contains the nexthop information for the remote vtep |
| 1.3.6.1.4.1.2272.1.218.6.1.1 | ColumnrcVxlanVtepNextHopVtepId | not-accessible | current | An index used to uniquely identify the remote vtep.This value is same as the vtep identifier in the rcVxlanVtepTable |
| 1.3.6.1.4.1.2272.1.218.6.1.2 | ColumnrcVxlanVtepNextHopIp | not-accessible | current | An index that uniquely identifies the next hop IP address of the remote vtep |
| 1.3.6.1.4.1.2272.1.218.6.1.3 | ColumnrcVxlanVtepNextHopIfIndex | read-only | current | Next hop destination ifindex to reach the remote vtep |
| 1.3.6.1.4.1.2272.1.218.6.1.4 | ColumnrcVxlanVtepNextHopVid | read-only | current | Next hop vlan id to reach the remote vtep |
| 1.3.6.1.4.1.2272.1.218.7 | TablercVxlanVnidElanEndPointTable | not-accessible | current | A list of elan end point entries. |
| 1.3.6.1.4.1.2272.1.218.7.1 | RowrcVxlanVnidElanEndPointEntry | not-accessible | current | Entry containing configuration information for a particular elan end point. |
| 1.3.6.1.4.1.2272.1.218.7.1.1 | ColumnrcVxlanVnidElanEndPointVnid | not-accessible | current | A value that uniquely identifies the vnid of this elan end point. |
| 1.3.6.1.4.1.2272.1.218.7.1.2 | ColumnrcVxlanVnidElanEndPointCvid | not-accessible | current | A value that uniquely identifies the customer vid of this elan end point. 4095 is not used. 4096 is reserved for untagged case |
| 1.3.6.1.4.1.2272.1.218.7.1.3 | ColumnrcVxlanVnidElanEndPointIfIndex | not-accessible | current | The interface index for mlt or port of this elan end point. |
| 1.3.6.1.4.1.2272.1.218.7.1.4 | ColumnrcVxlanVnidElanEndPointIsid | read-only | current | A i-sid value associated with vnid |
| 1.3.6.1.4.1.2272.1.218.7.1.5 | ColumnrcVxlanVnidElanEndPointRowStatus | read-create | current | Row status for create/delete elan end point under vnid |
| 1.3.6.1.4.1.2272.1.219 | NodercDvr | |||
| 1.3.6.1.4.1.2272.1.219.1 | NodercDvrGlobal | |||
| 1.3.6.1.4.1.2272.1.219.1.1 | ScalarrcDvrGlobalDomainId | read-write | current | A value that uniquely identifies the DVR domain that this node belongs to. Valid domain id for controller or leaf is 1-255. Set domain id to 0 when DVR is not … |
| 1.3.6.1.4.1.2272.1.219.1.2 | ScalarrcDvrGlobalRole | read-write | current | It represents the role of this node in the DVR domain. When DVR is created, role can be controller or leaf. |
| 1.3.6.1.4.1.2272.1.219.1.3 | ScalarrcDvrGlobalEnable | read-write | current | Configure DVR Controller or Leaf will set it to true. Set to false if DVR is not configured. |
| 1.3.6.1.4.1.2272.1.219.1.4 | ScalarrcDvrVirtualIstLocalAddr | read-write | current | When DVR is created as Leaf node, virtual ist can be configured on DVR Leaf. This is the local IP address of virtual ist on DVR Leaf. Virtual ist can not be co… |
| 1.3.6.1.4.1.2272.1.219.1.5 | ScalarrcDvrVirtualIstLocalMask | read-write | current | When DVR is created as Leaf node, virtual ist can be configured on DVR Leaf. This is the local subnet mask of virtual ist on DVR Leaf. Virtual ist can not be c… |
| 1.3.6.1.4.1.2272.1.219.1.6 | ScalarrcDvrVirtualIstPeerAddr | read-write | current | When DVR is created as leaf node, virtual ist can be configured on DVR Leaf. This is the peer Ip address of virtual ist on DVR Leaf. Virtual ist can not be con… |
| 1.3.6.1.4.1.2272.1.219.1.7 | ScalarrcDvrVirtualIstClusterId | read-write | current | When DVR is created as Leaf node, virtual ist can be configured on DVR Leaf. This is the cluster Id of virtual ist on DVR Leaf. Valid cluster id is 1-1000. Set… |
| 1.3.6.1.4.1.2272.1.219.1.8 | ScalarrcDvrGlobalDomainIsid | read-only | current | A value that uniquely identifies the DVR domain Isid that this node belongs to. Valid domain I-sid is 16775745-16775999. Set to 0 when DVR is not created. |
| 1.3.6.1.4.1.2272.1.219.1.9 | ScalarrcDvrGlobalBackboneIsid | read-only | current | A value that uniquely identifies the DVR backbone Isid that this node belongs to. Valid backbone I-sid is 16775744. Set to 0 when DVR is not created. |
| 1.3.6.1.4.1.2272.1.219.1.10 | ScalarrcDvrGlobalGatewayMac | read-only | current | DVR Gateway Mac address used by all DVR Domains. |
| 1.3.6.1.4.1.2272.1.219.1.11 | ScalarrcDvrGlobalInbandMgmtIp | read-only | current | Inband management IPv4 address configured under ISIS and can be used by both DVR and non DVR enabled nodes. |
| 1.3.6.1.4.1.2272.1.219.1.12 | ScalarrcDvrGlobalInjectDefaultRouteDisable | read-write | current | Controllers will by default send the default route(0.0.0.0/0.0.0.0) to all the Leaf nodes. To turn the default behavior off, configure inject-default-route-dis… |
| 1.3.6.1.4.1.2272.1.219.1.13 | ScalarrcDvrGlobalOperState | read-only | current | If the DVR object can be created(when ISIS and IPSC are enabled), then DVR operational state is up, otherwise it is down. |
| 1.3.6.1.4.1.2272.1.219.1.14 | ScalarrcDvrGlobalSystemIdAsMac | read-only | current | DVR System Id As Mac used by all DVR Domains. |
| 1.3.6.1.4.1.2272.1.219.1.15 | ScalarrcDvrGlobalHostEntriesClear | read-write | current | True to clear the host entry under GRT . Always returns false. |
| 1.3.6.1.4.1.2272.1.219.1.16 | ScalarrcDvrGlobalHostEntriesClearIpv4 | read-write | current | Used to clear the dvr host entries for particular IP address |
| 1.3.6.1.4.1.2272.1.219.1.17 | ScalarrcDvrGlobalHostEntriesClearL2Isid | read-write | current | Used to clear the dvr host entries for particular L2 ISID |
| 1.3.6.1.4.1.2272.1.219.1.18 | ScalarrcDvrGlobalHostEntriesClearL3Isid | read-write | current | Used to clear the dvr host entries for particular L3 ISID |
| 1.3.6.1.4.1.2272.1.219.1.19 | ScalarrcDvrVirtualIstIsid | read-only | current | When DVR is created as Leaf node, virtual ist can be configured on DVR Leaf. When virtual ist is configured, isid for virtual ist is created based on cluset id… |
| 1.3.6.1.4.1.2272.1.219.2 | TablercDvrRouteTable | not-accessible | current | Table of DVR routes that are in the CP DVR Table. This table contains network routes only (all non /32 routes). |
| 1.3.6.1.4.1.2272.1.219.2.1 | RowrcDvrRouteEntry | not-accessible | current | An entry of rcDvrRoute Table. An entry exists for each network route in a DVR domain. |
| 1.3.6.1.4.1.2272.1.219.2.1.1 | ColumnrcDvrRouteDestIpAddrType | not-accessible | current | Dest Ip address type of the DVR route table entry. It can be either IPv4 or IPv6 for DVR feature. |
| 1.3.6.1.4.1.2272.1.219.2.1.2 | ColumnrcDvrRouteDestIpAddr | not-accessible | current | Dest Ip address of the DVR route table entry. Support ipv4 size(4) and ipv6 size(16) depending on rcDvrRouteDestIpAddrType. |
| 1.3.6.1.4.1.2272.1.219.2.1.3 | ColumnrcDvrRouteDestMask | not-accessible | current | Dest mask of the DVR route table entry. |
| 1.3.6.1.4.1.2272.1.219.2.1.4 | ColumnrcDvrRouteL3Isid | not-accessible | current | L3 I-sid of the DVR route table entry. |
| 1.3.6.1.4.1.2272.1.219.2.1.5 | ColumnrcDvrRouteEcmpIndex | not-accessible | current | Ecmp Index for the Ecmp routes of the DVR route table entry. |
| 1.3.6.1.4.1.2272.1.219.2.1.6 | ColumnrcDvrRouteNextHopMac | read-only | current | Next hop BEB of the DVR route table entry. |
| 1.3.6.1.4.1.2272.1.219.2.1.7 | ColumnrcDvrRouteL2Isid | read-only | current | L2 I-sid of the DVR route table entry. |
| 1.3.6.1.4.1.2272.1.219.2.1.8 | ColumnrcDvrRouteCost | read-only | current | Cost of the DVR route table entry. |
| 1.3.6.1.4.1.2272.1.219.2.1.9 | ColumnrcDvrRouteNextHopName | read-only | current | Nexthop BEB's hostname of the DVR route table entry. |
| 1.3.6.1.4.1.2272.1.219.2.1.10 | ColumnrcDvrRouteType | read-only | current | Route type of the DVR route table entry. |
| 1.3.6.1.4.1.2272.1.219.2.1.11 | ColumnrcDvrRouteVrfId | read-only | current | VRF Id of the DVR route table entry. |
| 1.3.6.1.4.1.2272.1.219.3 | TablercDvrMembersTable | not-accessible | current | Table of DVR members in a DVR domain. It contains all Controllers and Leaf nodes. |
| 1.3.6.1.4.1.2272.1.219.3.1 | RowrcDvrMembersEntry | not-accessible | current | An entry of rcDvrMembers Table. It contains all Controller and Leaf nodes. |
| 1.3.6.1.4.1.2272.1.219.3.1.1 | ColumnrcDvrMemberMacAddress | not-accessible | current | Mac address of the DVR members table entry. |
| 1.3.6.1.4.1.2272.1.219.3.1.2 | ColumnrcDvrMemberSysId | read-only | current | Sys-id of the DVR members table entry. |
| 1.3.6.1.4.1.2272.1.219.3.1.3 | ColumnrcDvrMemberNickName | read-only | current | Nick-name of the DVR members table entry. |
| 1.3.6.1.4.1.2272.1.219.3.1.4 | ColumnrcDvrMemberRole | read-only | current | DVR role of the DVR members table entry. |
| 1.3.6.1.4.1.2272.1.219.3.1.5 | ColumnrcDvrMemberDomainId | read-only | current | DVR domain id of the DVR members table entry. |
| 1.3.6.1.4.1.2272.1.219.4 | TablercDvrInterfacesTable | not-accessible | current | Table of DVR Interfaces in a DVR domain. DVR interfaces are created when IP is configured on the DVR enabled L2VSN(vlan, i-sid). |
| 1.3.6.1.4.1.2272.1.219.4.1 | RowrcDvrInterfacesEntry | not-accessible | current | An entry of rcDvrInterfaces Table. An entry exists for each interface. |
| 1.3.6.1.4.1.2272.1.219.4.1.1 | ColumnrcDvrInterfaceVlanIpAddrType | not-accessible | current | Vlan Ip address type of the DVR interfaces table entry. It can be either IPv4 or IPv6 for DVR feature. |
| 1.3.6.1.4.1.2272.1.219.4.1.2 | ColumnrcDvrInterfaceVlanIpAddr | not-accessible | current | Dest Ip address of the DVR interfaces table entry. Support ipv4 size(4) and ipv6 size(16) depending on rcDvrInterfaceVlanIpAddrType. |
| 1.3.6.1.4.1.2272.1.219.4.1.3 | ColumnrcDvrInterfaceL3Isid | not-accessible | current | L3 I-sid of the DVR interfaces table entry. |
| 1.3.6.1.4.1.2272.1.219.4.1.4 | ColumnrcDvrInterfaceL2Isid | not-accessible | current | L2 I-sid of the DVR interfaces table entry. |
| 1.3.6.1.4.1.2272.1.219.4.1.5 | ColumnrcDvrInterfaceVlanIpMask | read-only | current | Vlan Ip address mask of the DVR interfaces table entry. |
| 1.3.6.1.4.1.2272.1.219.4.1.6 | ColumnrcDvrInterfaceVrfId | read-only | current | VRF Id of the DVR interfaces table entry. |
| 1.3.6.1.4.1.2272.1.219.4.1.7 | ColumnrcDvrInterfaceVlanId | read-only | current | Vlan Id of the DVR interfaces table entry. |
| 1.3.6.1.4.1.2272.1.219.4.1.8 | ColumnrcDvrInterfaceGwIpAddrType | read-only | current | The address type of the DVR Gateway IP address. It can be either IPv4 or IPv6 for DVR feature. |
| 1.3.6.1.4.1.2272.1.219.4.1.9 | ColumnrcDvrInterfaceGwIpAddr | read-only | current | DVR Gateway IP address of the DVR interfaces table entry. Support ipv4 size(4) and ipv6 size(16) depending on rcDvrInterfaceGwIpAddrType. |
| 1.3.6.1.4.1.2272.1.219.4.1.10 | ColumnrcDvrInterfaceAdminState | read-only | current | Admin state of the DVR interfaces table entry. |
| 1.3.6.1.4.1.2272.1.219.4.1.11 | ColumnrcDvrInterfaceSpbmcState | read-only | current | SPBMC state of the DVR interfaces table entry. |
| 1.3.6.1.4.1.2272.1.219.4.1.12 | ColumnrcDvrInterfaceIgmpVersion | read-only | current | The version of IGMP which is running on this DVR interface. |
| 1.3.6.1.4.1.2272.1.219.5 | TablercDvrHostEntriesTable | not-accessible | current | Table of DVR host entries in a DVR domain. |
| 1.3.6.1.4.1.2272.1.219.5.1 | RowrcDvrHostEntriesEntry | not-accessible | current | An entry of rcDvrHostEntries Table. A entry exists for each /32 host route in DVR domain. |
| 1.3.6.1.4.1.2272.1.219.5.1.1 | ColumnrcDvrHostEntriesIpAddrType | not-accessible | current | IP address type of the DVR host-entries table entry. It can be either IPv4 or IPv6 for DVR feature. |
| 1.3.6.1.4.1.2272.1.219.5.1.2 | ColumnrcDvrHostEntriesIpAddr | not-accessible | current | IP address of the DVR host-entries table entry. Support ipv4 size(4) and ipv6 size(16) depending on rcDvrHostEntriesIpAddrType. |
| 1.3.6.1.4.1.2272.1.219.5.1.3 | ColumnrcDvrHostEntriesMask | not-accessible | current | Mask of the DVR host-entries table entry. |
| 1.3.6.1.4.1.2272.1.219.5.1.4 | ColumnrcDvrHostEntriesL3Isid | not-accessible | current | L3 I-sid of the DVR host-entries table entry. |
| 1.3.6.1.4.1.2272.1.219.5.1.5 | ColumnrcDvrHostEntriesMacAddr | read-only | current | Mac address of the DVR host-entries table entry. |
| 1.3.6.1.4.1.2272.1.219.5.1.6 | ColumnrcDvrHostEntriesL2Isid | read-only | current | L2 I-sid of the DVR host-entries table entry. |
| 1.3.6.1.4.1.2272.1.219.5.1.7 | ColumnrcDvrHostEntriesPort | read-only | current | Port of the DVR host-entries table entry. |
| 1.3.6.1.4.1.2272.1.219.5.1.8 | ColumnrcDvrHostEntriesDomainId | read-only | current | Domain Id of the DVR host-entries table entry. |
| 1.3.6.1.4.1.2272.1.219.5.1.9 | ColumnrcDvrHostEntriesType | read-only | current | Host entry type of the DVR host-entries table entry. |
| 1.3.6.1.4.1.2272.1.219.5.1.10 | ColumnrcDvrHostEntriesNextHopName | read-only | current | Next hop of the DVR host-entries table entry. |
| 1.3.6.1.4.1.2272.1.219.5.1.11 | ColumnrcDvrHostEntriesNextHopMac | read-only | current | Next hop as mac of the DVR host-entries table entry. |
| 1.3.6.1.4.1.2272.1.219.5.1.12 | ColumnrcDvrHostEntriesClear | read-write | current | True to clear the entry. Always returns false. |
| 1.3.6.1.4.1.2272.1.219.5.1.13 | ColumnrcDvrHostEntriesVrfId | read-only | current | VRF Id of the DVR host-entries table entry. |
| 1.3.6.1.4.1.2272.1.219.6 | TablercDvrL3vsnTable | not-accessible | current | Table of DVR L3VSN in a DVR domain. On DVR Controller, it has all configured vrfIds/vrf names. On DVR Leaf, it only has internal created vrfIds/vrf names. |
| 1.3.6.1.4.1.2272.1.219.6.1 | RowrcDvrL3vsnEntry | not-accessible | current | An entry of rcDvrL3vsn Table. An entry exists for each vrfId. |
| 1.3.6.1.4.1.2272.1.219.6.1.1 | ColumnrcDvrL3vsnVrfId | not-accessible | current | L3VSN VrfId of the DVR L3VSN table entry. |
| 1.3.6.1.4.1.2272.1.219.6.1.2 | ColumnrcDvrL3vsnIsid | read-only | current | L3VSN I-sid of the DVR L3VSN table entry. |
| 1.3.6.1.4.1.2272.1.219.6.1.3 | ColumnrcDvrL3vsnVrfName | read-only | current | L3VSN vrf name of the DVR L3VSN table entry. |
| 1.3.6.1.4.1.2272.1.219.6.1.4 | ColumnrcDvrL3vsnInjectDefaultRouteDisable | read-write | current | l3VSN inject-default-route-disable of the DVR L3VSN table entry. This is used when the user wants to disable the default feature of injecting the default route… |
| 1.3.6.1.4.1.2272.1.219.7 | TablercDvrDatabaseTable | not-accessible | current | Table of DVR database that are in the CP DVR Table. This table contains all network and host routes |
| 1.3.6.1.4.1.2272.1.219.7.1 | RowrcDvrDatabaseEntry | not-accessible | current | An entry of rcDvrDatabase Table. An entry exists for each network or host route in a DVR domain. |
| 1.3.6.1.4.1.2272.1.219.7.1.1 | ColumnrcDvrDatabaseDestIpAddrType | not-accessible | current | Dest Ip address type of the DVR database table entry. It can be either IPv4 or IPv6 for DVR feature. |
| 1.3.6.1.4.1.2272.1.219.7.1.2 | ColumnrcDvrDatabaseDestIpAddr | not-accessible | current | Dest Ip address of the DVR database table entry. Support ipv4 size(4) and ipv6 size(16) depending on rcDvrDatabaseDestIpAddrType. |
| 1.3.6.1.4.1.2272.1.219.7.1.3 | ColumnrcDvrDatabaseDestMask | not-accessible | current | Dest mask of the DVR database table entry. |
| 1.3.6.1.4.1.2272.1.219.7.1.4 | ColumnrcDvrDatabaseL3Isid | not-accessible | current | L3 I-sid of the DVR database table entry. |
| 1.3.6.1.4.1.2272.1.219.7.1.5 | ColumnrcDvrDatabaseEcmpIndex | not-accessible | current | Ecmp Index for the Ecmp routes of the DVR databasse table entry. |
| 1.3.6.1.4.1.2272.1.219.7.1.6 | ColumnrcDvrDatabaseNextHop | read-only | current | Next hop BEB of the DVR database table entry. |
| 1.3.6.1.4.1.2272.1.219.7.1.7 | ColumnrcDvrDatabaseL2Isid | read-only | current | L2 I-sid of the DVR database table entry. |
| 1.3.6.1.4.1.2272.1.219.7.1.8 | ColumnrcDvrDatabaseOutgoingInterface | read-only | current | Outgoing interface (ports or mlt) of the DVR database table entry. |
| 1.3.6.1.4.1.2272.1.219.7.1.9 | ColumnrcDvrDatabaseSpbCost | read-only | current | Spb cost of the DVR database table entry. |
| 1.3.6.1.4.1.2272.1.219.7.1.10 | ColumnrcDvrDatabasePrefixCost | read-only | current | Prefix cost of the DVR database table entry. |
| 1.3.6.1.4.1.2272.1.219.7.1.11 | ColumnrcDvrDatabaseNextHopName | read-only | current | Nexthop BEB's hostname of the DVR database table entry. |
| 1.3.6.1.4.1.2272.1.219.7.1.12 | ColumnrcDvrDatabaseAge | read-only | current | Age(uptime since created) of the DVR database table entry. |
| 1.3.6.1.4.1.2272.1.219.7.1.13 | ColumnrcDvrDatabaseVrfId | read-only | current | VRF Id of the DVR database table entry. |
| 1.3.6.1.4.1.2272.1.219.8 | TablercDvrBackboneEntriesTable | not-accessible | current | Table of DVR backbone entries in a DVR domain. Used for inter DVR route redistribution. |
| 1.3.6.1.4.1.2272.1.219.8.1 | RowrcDvrBackboneEntriesEntry | not-accessible | current | An entry of rcDvrBackboneEntriesTable. |
| 1.3.6.1.4.1.2272.1.219.8.1.1 | ColumnrcDvrBackboneEntriesIpAddrType | not-accessible | current | IP address type of the DVR backbone-entries table entry. It can be either IPv4 or IPv6 for DVR feature. |
| 1.3.6.1.4.1.2272.1.219.8.1.2 | ColumnrcDvrBackboneEntriesIpAddr | not-accessible | current | IP address of the DVR backbone-entries table entry. Support ipv4 size(4) and ipv6 size(16) depending on rcDvrBackboneEntriesIpAddrType. |
| 1.3.6.1.4.1.2272.1.219.8.1.3 | ColumnrcDvrBackboneEntriesL3Isid | not-accessible | current | L3 I-sid of the DVR backbone-entries table entry. |
| 1.3.6.1.4.1.2272.1.219.8.1.4 | ColumnrcDvrBackboneEntriesDomainId | not-accessible | current | Domain id of the DVR backbone-entries table entry. |
| 1.3.6.1.4.1.2272.1.219.8.1.5 | ColumnrcDvrBackboneEntriesEcmpIndex | not-accessible | current | Ecmp Index for the Ecmp routes of the DVR backbone-entries table entry. |
| 1.3.6.1.4.1.2272.1.219.8.1.6 | ColumnrcDvrBackboneEntriesHostMacAddr | read-only | current | Host mac address of the DVR backbone-entries table entry. |
| 1.3.6.1.4.1.2272.1.219.8.1.7 | ColumnrcDvrBackboneEntriesL2Isid | read-only | current | L2 I-sid of the DVR backbone-entries table entry. |
| 1.3.6.1.4.1.2272.1.219.8.1.8 | ColumnrcDvrBackboneEntriesAdvControllerName | read-only | current | Advertising controller of the DVR backbone-entries table entry. |
| 1.3.6.1.4.1.2272.1.219.8.1.9 | ColumnrcDvrBackboneEntriesAdvController | read-only | current | Advertising controller as mac of the DVR backbone-entries table entry. |
| 1.3.6.1.4.1.2272.1.219.8.1.10 | ColumnrcDvrBackboneEntriesNextHopName | read-only | current | Next hop of the DVR backbone-entries table entry. |
| 1.3.6.1.4.1.2272.1.219.8.1.11 | ColumnrcDvrBackboneEntriesNextHopMac | read-only | current | Next hop as mac of the DVR backbone-entries table entry. |
| 1.3.6.1.4.1.2272.1.219.9 | TablercDvrBackboneMembersTable | not-accessible | current | Table of DVR backbone members in a DVR domain. It contains all Controllers and NON DVR BEBs. |
| 1.3.6.1.4.1.2272.1.219.9.1 | RowrcDvrBackboneMembersEntry | not-accessible | current | An entry of rcDvrBackboneMembersTable. It contains all Controllers and NON DVR BEBs. |
| 1.3.6.1.4.1.2272.1.219.9.1.1 | ColumnrcDvrBackboneMemberMacAddress | not-accessible | current | Mac address of the DVR backbone members table entry. |
| 1.3.6.1.4.1.2272.1.219.9.1.2 | ColumnrcDvrBackboneMemberSysId | read-only | current | Sys-id of the DVR backbone members table entry. |
| 1.3.6.1.4.1.2272.1.219.9.1.3 | ColumnrcDvrBackboneMemberNickName | read-only | current | Nick-name of the DVR backbone members table entry. |
| 1.3.6.1.4.1.2272.1.219.9.1.4 | ColumnrcDvrBackboneMemberRole | read-only | current | DVR role of the DVR backbone members table entry. |
| 1.3.6.1.4.1.2272.1.219.9.1.5 | ColumnrcDvrBackboneMemberDomainId | read-only | current | DVR domain id of the DVR backbone members table entry. |
| 1.3.6.1.4.1.2272.1.220 | NodercLldpExt | |||
| 1.3.6.1.4.1.2272.1.220.1 | NodercLldpMIBObjects | |||
| 1.3.6.1.4.1.2272.1.220.1.1 | NodercLldpGlobal | |||
| 1.3.6.1.4.1.2272.1.220.1.2 | NodercLldpPort | |||
| 1.3.6.1.4.1.2272.1.220.1.2.1 | TablercLldpPortCdpConfigTable | not-accessible | current | The table contains the configuration of CDP on the device's interfaces. |
| 1.3.6.1.4.1.2272.1.220.1.2.1.1 | RowrcLldpPortCdpConfigEntry | not-accessible | current | An entry in the rcLldpPortCdpConfigTable, containing the status of CDP on an interface. |
| 1.3.6.1.4.1.2272.1.220.1.2.1.1.1 | ColumnrcLldpPortCdpConfigIfIndex | not-accessible | current | The ifIndex value of the local interface. It is local port interface index |
| 1.3.6.1.4.1.2272.1.220.1.2.1.1.2 | ColumnrcLldpPortCdpConfigAdminState | read-write | current | Admininstrattely state of the CDP message on the interface. the value of this object has no meaning if CDP compatible mode is globally disabled (rcLldpGlobalCd… |
| 1.3.6.1.4.1.2272.1.220.1.2.2 | TablercLldpPortCdpRemTable | not-accessible | current | The table contains the Remote device information obtained via receiving CDP messages on the local interface. Each rows is per physical network connection known… |
| 1.3.6.1.4.1.2272.1.220.1.2.2.1 | RowrcLldpPortCdpRemEntry | not-accessible | current | An entry of the rcLldpPortCdpRemTable, contains the information received via CDP on one interface from one device. Entries is craeted when CDP message is recei… |
| 1.3.6.1.4.1.2272.1.220.1.2.2.1.1 | ColumnrcLldpPortCdpRemLocalPortNum | not-accessible | current | The port interface index value used to identify the port component (contained in the local chassis with the LLDP/CDP agent) associated with this entry. The rcL… |
| 1.3.6.1.4.1.2272.1.220.1.2.2.1.2 | ColumnrcLldpPortCdpRemIndex | not-accessible | current | This object represents an arbitrary local integer value used by this agent to identify a particular connection instance, unique only for the indicated remote s… |
| 1.3.6.1.4.1.2272.1.220.1.2.2.1.3 | ColumnrcLldpPortCdpRemAddressType | read-only | current | The type of address identifier encoding used in the associated 'rcLldpPortCdpRemAddress' object. |
| 1.3.6.1.4.1.2272.1.220.1.2.2.1.4 | ColumnrcLldpPortCdpRemAddress | read-only | current | The string value used to identify the management address component associated with the remote system. It is reported in the Address TLV of the most recently re… |
| 1.3.6.1.4.1.2272.1.220.1.2.2.1.5 | ColumnrcLldpPortCdpRemVersion | read-only | current | The Version string as reported in CDP message |
| 1.3.6.1.4.1.2272.1.220.1.2.2.1.6 | ColumnrcLldpPortCdpRemDeviceIdType | read-only | current | An indication of the format of Device Id (rcLldpPortCdpRemDeviceId) of remote device. |
| 1.3.6.1.4.1.2272.1.220.1.2.2.1.7 | ColumnrcLldpPortCdpRemDeviceId | read-only | current | The value of string of remote device as reported in CDP message. The zero-length string indicates no Device-ID field TLV reported |
| 1.3.6.1.4.1.2272.1.220.1.2.2.1.8 | ColumnrcLldpPortCdpRemPortId | read-only | current | The string value used to identify the port component associated with the remote system. This will typically be the value of the ifName |
| 1.3.6.1.4.1.2272.1.220.1.2.2.1.9 | ColumnrcLldpPortCdpRemPlatform | read-only | current | The Device's Hardware Platform as reported in the most recent CDP message. The zero-length string indicates that no Platform field (TLV) was reported in the mo… |
| 1.3.6.1.4.1.2272.1.220.1.2.2.1.10 | ColumnrcLldpPortCdpRemCapabilities | read-only | current | The bitmap value used to identify which system capabilities are supported on the retome system. |
| 1.3.6.1.4.1.2272.1.220.1.2.2.1.11 | ColumnrcLldpPortCdpRemSysName | read-only | current | The string value used to identify the system name of the remote system. The valud of sysName MIB objec |
| 1.3.6.1.4.1.2272.1.220.1.2.2.1.12 | ColumnrcLldpPortCdpRemLastChange | read-only | current | Indicates the time when this cache entry was last changed. This object is initialised to the current time when the entry gets created and updated to the curren… |
| 1.3.6.1.4.1.2272.1.220.1.2.3 | TablercLldpRemExtendedTable | not-accessible | current | This table is a extended table of lldpRemTable. It contains additional objects for lldpRemTable |
| 1.3.6.1.4.1.2272.1.220.1.2.3.1 | RowrcLldpRemExtendedEntry | not-accessible | current | Information about a particular physical network connection. This entry is additinal objects of the lldpRemTable |
| 1.3.6.1.4.1.2272.1.220.1.2.3.1.1 | ColumnrcLldpRemExtendedProtocolType | read-only | current | Indicates the entry is CDP or LLDP protocol |
| 1.3.6.1.4.1.2272.1.220.1.2.3.1.2 | ColumnrcLldpRemExtendedIpAddress | read-only | current | The neighbor Ip address |
| 1.3.6.1.4.1.2272.1.221 | NodercSflow | |||
| 1.3.6.1.4.1.2272.1.221.1 | NodercSflowMib | |||
| 1.3.6.1.4.1.2272.1.221.1.1 | NodercSflowObjects | |||
| 1.3.6.1.4.1.2272.1.221.1.1.1 | NodercSflowScalars | |||
| 1.3.6.1.4.1.2272.1.221.1.1.1.1 | ScalarrcSflowAdminEnable | read-write | current | Globally enables or disables sflow. |
| 1.3.6.1.4.1.2272.1.221.1.1.1.2 | ScalarrcSflowAgentAddressType | read-write | current | The address type of the address associated with sflow agent. |
| 1.3.6.1.4.1.2272.1.221.1.1.1.3 | ScalarrcSflowAgentAddress | read-write | current | The IP address associated with sflow agent. |
| 1.3.6.1.4.1.2272.1.221.1.1.2 | TablercSflowStatsTable | not-accessible | current | This table is used to show/clear sflow statistics. |
| 1.3.6.1.4.1.2272.1.221.1.1.2.1 | RowrcSflowStatsEntry | not-accessible | current | Entry containing sflow stats information. |
| 1.3.6.1.4.1.2272.1.221.1.1.2.1.1 | ColumnrcSflowStatsIndex | not-accessible | current | sflow Collector id. |
| 1.3.6.1.4.1.2272.1.221.1.1.2.1.2 | ColumnrcSflowStatsDatagramCount | read-only | current | Number of datagrams sent to collector. |
| 1.3.6.1.4.1.2272.1.221.1.1.2.1.3 | ColumnrcSflowStatsClearStats | read-write | current | Used to clear the sflow statistics. |
| 1.3.6.1.4.1.2272.1.222 | NodercDigitalCert | |||
| 1.3.6.1.4.1.2272.1.222.1 | NodercDigitalCertMib | |||
| 1.3.6.1.4.1.2272.1.222.1.0 | NodercDigitalCertNotifications | |||
| 1.3.6.1.4.1.2272.1.222.1.1 | NodercDigitalCertObjects | |||
| 1.3.6.1.4.1.2272.1.222.1.1.1 | NodercDigitalCertScalars | |||
| 1.3.6.1.4.1.2272.1.222.1.1.1.1 | ScalarrcDigitalCertSubjectCommonName | read-write | current | The Common Name field of the subject sending the Certificate Signing Request to the Certificate Authority |
| 1.3.6.1.4.1.2272.1.222.1.1.1.2 | ScalarrcDigitalCertSubjectEmailAddress | read-write | current | The Email Address of the subject sending the Certificate Signing Request to the Certificate Authority |
| 1.3.6.1.4.1.2272.1.222.1.1.1.3 | ScalarrcDigitalCertSubjectOrganizationalUnit | read-write | current | The Organizational Unit field of the subject sending the Certificate Signing Request to the Certificate Authority |
| 1.3.6.1.4.1.2272.1.222.1.1.1.4 | ScalarrcDigitalCertSubjectOrganization | read-write | current | The Organization of the subject sending the Certificate Signing Request to the Certificate Authority |
| 1.3.6.1.4.1.2272.1.222.1.1.1.5 | ScalarrcDigitalCertSubjectLocality | read-write | current | The name of the Locality of the subject sending the Certificate Signing Request to the Certificate Authority |
| 1.3.6.1.4.1.2272.1.222.1.1.1.6 | ScalarrcDigitalCertSubjectProvince | read-write | current | The Province name of the subject sending the Certificate Signing Request to the Certificate Authority |
| 1.3.6.1.4.1.2272.1.222.1.1.1.7 | ScalarrcDigitalCertSubjectCountry | read-write | current | The name of the country of the subject sending the Certificate Signing Request to the Certificate Authority |
| 1.3.6.1.4.1.2272.1.222.1.1.1.8 | ScalarrcDigitalCertInstallFile | read-write | current | This installs the CA/Root CA/subject certificate/CRL file obtained offline from the Certificate Authority |
| 1.3.6.1.4.1.2272.1.222.1.1.1.9 | ScalarrcDigitalCertInstallFileName | read-write | current | This contains the certificate file name obtained offline from the Certificate Authority |
| 1.3.6.1.4.1.2272.1.222.1.1.1.10 | ScalarrcDigitalCertUninstallFile | read-write | current | This uninstalls the CA/Root CA/subject certificate/CRL file obtained offline from the Certificate Authority |
| 1.3.6.1.4.1.2272.1.222.1.1.1.11 | ScalarrcDigitalCertUninstallFileName | read-write | current | This contains the certificate file name obtained offline from the Certificate Authority |
| 1.3.6.1.4.1.2272.1.222.1.1.1.12 | ScalarrcDigitalCertGenerateCsr | read-write | current | Generates the Certificate Signing Request required to obtain the Offline Subject Certificate |
| 1.3.6.1.4.1.2272.1.222.1.1.2 | TablercDigitalCertKeyTable | not-accessible | current | table containing all the information related to the key-pair, required to get the Digital Certificate from the Certificate Authority. |
| 1.3.6.1.4.1.2272.1.222.1.1.2.1 | RowrcDigitalCertKeyEntry | not-accessible | current | the entry specifies the key-pair name, size and the algorithm used for the generation of key-pair. |
| 1.3.6.1.4.1.2272.1.222.1.1.2.1.1 | ColumnrcDigitalCertKeyType | not-accessible | current | defines the algorithm used to generate the key-pair |
| 1.3.6.1.4.1.2272.1.222.1.1.2.1.2 | ColumnrcDigitalCertKeySize | not-accessible | current | defines the size of the key-pair to be generated |
| 1.3.6.1.4.1.2272.1.222.1.1.2.1.3 | ColumnrcDigitalCertKeyName | read-only | current | refers to the name of the key-pair generated for the subject. It is an auto generated entity, generated as the combination of key-type and key-size |
| 1.3.6.1.4.1.2272.1.222.1.1.2.1.4 | ColumnrcDigitalCertKeyRowStatus | read-create | current | used to create/delete entries |
| 1.3.6.1.4.1.2272.1.222.1.1.3 | TablercDigitalCertCaTable | not-accessible | current | table containing all the information related to the Certificate Authority issuing the Digital Certificate |
| 1.3.6.1.4.1.2272.1.222.1.1.3.1 | RowrcDigitalCertCaEntry | not-accessible | current | entry containing information about the Certificate Authority |
| 1.3.6.1.4.1.2272.1.222.1.1.3.1.1 | ColumnrcDigitalCertCaName | not-accessible | current | user defined name referring to the Certificate Authority issuing the Digital Certificate |
| 1.3.6.1.4.1.2272.1.222.1.1.3.1.2 | ColumnrcDigitalCertCaCommonName | read-create | current | defines the Common Name of the Certificate Authority issuing the Digital Certificate |
| 1.3.6.1.4.1.2272.1.222.1.1.3.1.3 | ColumnrcDigitalCertCaKeyName | read-create | current | defines the name of the associated key pair . It refers to the Key Name entry of the rcDigitalCertKeyTable |
| 1.3.6.1.4.1.2272.1.222.1.1.3.1.4 | ColumnrcDigitalCertCaCaUrl | read-create | current | defines the URL of the Certificate Authority issuing the Digital Certificate |
| 1.3.6.1.4.1.2272.1.222.1.1.3.1.5 | ColumnrcDigitalCertCaAction | read-create | current | specifies the various actions Certificate Authority can take- 'noop' - No operation 'caauth' - Certificate Authority (CA) authentication. 'enroll' - Certificat… |
| 1.3.6.1.4.1.2272.1.222.1.1.3.1.6 | ColumnrcDigitalCertCaActionChallengePassword | read-create | current | specifies the challenge password required to perform the scep operation |
| 1.3.6.1.4.1.2272.1.222.1.1.3.1.7 | ColumnrcDigitalCertCaLastActionStatus | read-only | current | specifies the status of the last action 'none' - No action was performed yet. 'success' - Execution of the action triggered is completed successfully. 'failed'… |
| 1.3.6.1.4.1.2272.1.222.1.1.3.1.8 | ColumnrcDigitalCertCaLastActionFailureReason | read-only | current | defines the reason of failure for the last action performed by the Certificate Authority |
| 1.3.6.1.4.1.2272.1.222.1.1.3.1.9 | ColumnrcDigitalCertCaInstallRootCaFileName | read-create | current | installs the Root Certificate Authority's certificate obtained offline |
| 1.3.6.1.4.1.2272.1.222.1.1.3.1.10 | ColumnrcDigitalCertCaSubjectCertificateValidityDays | read-create | current | number of days for which subject certificate will remain valid |
| 1.3.6.1.4.1.2272.1.222.1.1.3.1.11 | ColumnrcDigitalCertCaUsePost | read-create | current | specifies the HTTP request type : URL or POST , TRUE for EJBCA and FALSE for Win2012 CA |
| 1.3.6.1.4.1.2272.1.222.1.1.3.1.12 | ColumnrcDigitalCertCaRowStatus | read-create | current | used to create/delete entries |
| 1.3.6.1.4.1.2272.1.222.1.1.4 | TablercDigitalCertTable | not-accessible | current | table of information about digital certificate |
| 1.3.6.1.4.1.2272.1.222.1.1.4.1 | RowrcDigitalCertEntry | not-accessible | current | entry containing information about digital certificates |
| 1.3.6.1.4.1.2272.1.222.1.1.4.1.1 | ColumnrcDigitalCertType | not-accessible | current | uniquely identifies the certificate 'onlineCaCert' - Certificate Authority's Certificate obtained Online from Certificate Authority 'onlineSubjectCert' - Subje… |
| 1.3.6.1.4.1.2272.1.222.1.1.4.1.2 | ColumnrcDigitalCertVersionNumber | read-only | current | specifies the version number of the certificate for the subject as issued by the Certificate Authority |
| 1.3.6.1.4.1.2272.1.222.1.1.4.1.3 | ColumnrcDigitalCertSerialNumber | read-only | current | specifies the serial number of the certificate for the subject as issued by the Certificate Authority |
| 1.3.6.1.4.1.2272.1.222.1.1.4.1.4 | ColumnrcDigitalCertIssuerName | read-only | current | specifies the issuer's name of the certificate for the subject as issued by the Certificate Authority |
| 1.3.6.1.4.1.2272.1.222.1.1.4.1.5 | ColumnrcDigitalCertValidStartPeriod | read-only | current | specifies the start date of the validation period of the certificate for the subject as issued by the Certificate Authority |
| 1.3.6.1.4.1.2272.1.222.1.1.4.1.6 | ColumnrcDigitalCertValidEndPeriod | read-only | current | specifies the last date of the validation period of the certificate for the subject as issued by the Certificate Authority |
| 1.3.6.1.4.1.2272.1.222.1.1.4.1.7 | ColumnrcDigitalCertCertificateSignatureAlgorithm | read-only | current | specifies the algorithm used for the issuer's signature on the certificate for the subject as issued by the Certificate Authority |
| 1.3.6.1.4.1.2272.1.222.1.1.4.1.8 | ColumnrcDigitalCertCertificateSignature | read-only | current | specifies the issuer's signature on the certificate for the subject as issued by the Certificate Authority |
| 1.3.6.1.4.1.2272.1.222.1.1.4.1.9 | ColumnrcDigitalCertSubject | read-only | current | specifies the details of the subject on its certificate as issued by Certificate Authority |
| 1.3.6.1.4.1.2272.1.222.1.1.4.1.10 | ColumnrcDigitalCertSubjectPublicKeyAlgorithm | read-only | current | specifies the algorithm used to generate the subject's public key for the certificate issued by the Certificate Authority |
| 1.3.6.1.4.1.2272.1.222.1.1.4.1.11 | ColumnrcDigitalCertSubjectPublicKey | read-only | current | specifies the public key of the subject used to the Certificate Signing Request |
| 1.3.6.1.4.1.2272.1.222.1.1.4.1.12 | ColumnrcDigitalCertHasBasicConstraint | read-only | current | specifies whether certificate contains basic certificate constraint |
| 1.3.6.1.4.1.2272.1.222.1.1.4.1.13 | ColumnrcDigitalCertHasKeyUsage | read-only | current | specifies whether certificate contains basic key usage constraint |
| 1.3.6.1.4.1.2272.1.222.1.1.4.1.14 | ColumnrcDigitalCertIsCa | read-only | current | specifies if this is ca certificate or not |
| 1.3.6.1.4.1.2272.1.222.1.1.4.1.15 | ColumnrcDigitalCertKeyUsage | read-only | current | specifies the purpose of the key used in the certificate.It is represented in form of bits as follows- bit 0 - digitalSignature bit 1 - nonRepudiation bit 2 - … |
| 1.3.6.1.4.1.2272.1.222.1.1.4.1.16 | ColumnrcDigitalCertStatus | read-only | current | specifies the status of the certificate |
| 1.3.6.1.4.1.2272.1.222.1.1.4.1.17 | ColumnrcDigitalCertInstalled | read-only | current | specifies whether the certificate is installed or not |
| 1.3.6.1.4.1.2272.1.222.1.1.4.1.18 | ColumnrcDigitalCertCdpUrl | read-only | current | specifies the CDP URL present in the Extensions field of the Digital Certificate |
| 1.3.6.1.4.1.2272.1.222.1.1.4.1.19 | ColumnrcDigitalCertOcspUrl | read-only | current | specifies the OCSP URL present in the AIA field of the Digital Certificate |
| 1.3.6.1.4.1.2272.1.222.1.1.4.1.20 | ColumnrcDigitalCertExtendedKeyUsage | read-only | current | specifies the purpose for which the key may be used, in addition to or in place of the basic purposes indicated in the key-usage field of the certificate |
| 1.3.6.1.4.1.2272.1.222.1.1.5 | TablercDigitalCertStoreTable | not-accessible | current | table of information about offline intermidate CA and root certificate |
| 1.3.6.1.4.1.2272.1.222.1.1.5.1 | RowrcDigitalCertStoreEntry | not-accessible | current | entry containing information about offline intermidate CA and root digital certificates |
| 1.3.6.1.4.1.2272.1.222.1.1.5.1.1 | ColumnrcDigitalCertStoreType | read-only | current | uniquely identifies the certificate 'caCert' - Certificate Authority's Certificate 'rootCaCert' - Root Certificate Authority's Certificate |
| 1.3.6.1.4.1.2272.1.222.1.1.5.1.2 | ColumnrcDigitalCertStoreCommonName | not-accessible | current | defines the Common Name of the Certificate Authority issuing the Digital Certificate |
| 1.3.6.1.4.1.2272.1.222.1.1.5.1.3 | ColumnrcDigitalCertStoreVersionNumber | read-only | current | specifies the version number of the certificate for the subject as issued by the Certificate Authority |
| 1.3.6.1.4.1.2272.1.222.1.1.5.1.4 | ColumnrcDigitalCertStoreSerialNumber | read-only | current | specifies the serial number of the certificate for the subject as issued by the Certificate Authority |
| 1.3.6.1.4.1.2272.1.222.1.1.5.1.5 | ColumnrcDigitalCertStoreIssuerName | read-only | current | specifies the issuer's name of the certificate for the subject as issued by the Certificate Authority |
| 1.3.6.1.4.1.2272.1.222.1.1.5.1.6 | ColumnrcDigitalCertStoreValidStartPeriod | read-only | current | specifies the start date of the validation period of the certificate for the subject as issued by the Certificate Authority |
| 1.3.6.1.4.1.2272.1.222.1.1.5.1.7 | ColumnrcDigitalCertStoreValidEndPeriod | read-only | current | specifies the last date of the validation period of the certificate for the subject as issued by the Certificate Authority |
| 1.3.6.1.4.1.2272.1.222.1.1.5.1.8 | ColumnrcDigitalCertStoreCertificateSignatureAlgorithm | read-only | current | specifies the algorithm used for the issuer's signature on the certificate for the subject as issued by the Certificate Authority |
| 1.3.6.1.4.1.2272.1.222.1.1.5.1.9 | ColumnrcDigitalCertStoreCertificateSignature | read-only | current | specifies the issuer's signature on the certificate for the subject as issued by the Certificate Authority |
| 1.3.6.1.4.1.2272.1.222.1.1.5.1.10 | ColumnrcDigitalCertStoreSubject | read-only | current | specifies the details of the subject on its certificate as issued by Certificate Authority |
| 1.3.6.1.4.1.2272.1.222.1.1.5.1.11 | ColumnrcDigitalCertStoreSubjectPublicKeyAlgorithm | read-only | current | specifies the algorithm used to generate the subject's public key for the certificate issued by the Certificate Authority |
| 1.3.6.1.4.1.2272.1.222.1.1.5.1.12 | ColumnrcDigitalCertStoreSubjectPublicKey | read-only | current | specifies the public key of the subject used to the Certificate Signing Request |
| 1.3.6.1.4.1.2272.1.222.1.1.5.1.13 | ColumnrcDigitalCertStoreHasBasicConstraint | read-only | current | specifies whether certificate contains basic certificate constraint |
| 1.3.6.1.4.1.2272.1.222.1.1.5.1.14 | ColumnrcDigitalCertStoreHasKeyUsage | read-only | current | specifies whether certificate contains basic key usage constraint |
| 1.3.6.1.4.1.2272.1.222.1.1.5.1.15 | ColumnrcDigitalCertStoreIsCa | read-only | current | specifies if this is ca certificate or not |
| 1.3.6.1.4.1.2272.1.222.1.1.5.1.16 | ColumnrcDigitalCertStoreKeyUsage | read-only | current | specifies the purpose of the key used in the certificate.It is represented in form of bits as follows- bit 0 - digitalSignature bit 1 - nonRepudiation bit 2 - … |
| 1.3.6.1.4.1.2272.1.222.1.1.5.1.17 | ColumnrcDigitalCertStoreStatus | read-only | current | specifies the status of the certificate |
| 1.3.6.1.4.1.2272.1.222.1.1.5.1.18 | ColumnrcDigitalCertStoreInstalled | read-only | current | specifies whether the certificate is installed or not |
| 1.3.6.1.4.1.2272.1.222.1.1.5.1.19 | ColumnrcDigitalCertStoreCdpUrl | read-only | current | specifies the CDP URL present in the Extensions field of the Digital Certificate |
| 1.3.6.1.4.1.2272.1.222.1.1.5.1.20 | ColumnrcDigitalCertStoreOcspUrl | read-only | current | specifies the OCSP URL present in the AIA field of the Digital Certificate |
| 1.3.6.1.4.1.2272.1.222.1.1.5.1.21 | ColumnrcDigitalCertStoreExtendedKeyUsage | read-only | current | specifies the purpose for which the key may be used, in addition to or in place of the basic purposes indicated in the key-usage field of the certificate |
| 1.3.6.1.4.1.2272.1.222.1.1.5.1.22 | ColumnrcDigitalCertStoreCaFileName | read-only | current | stores the intermediate and root Certificate Authority's certificate filename obtained offline |
| 1.3.6.1.4.1.2272.1.223 | NodercNls | |||
| 1.3.6.1.4.1.2272.1.224 | NodercCarrier | |||
| 1.3.6.1.4.1.2272.1.225 | NodercOvsdb | |||
| 1.3.6.1.4.1.2272.1.226 | NodercAppTelemetry | |||
| 1.3.6.1.4.1.2272.1.227 | NodercRestConf | |||
| 1.3.6.1.4.1.2272.1.228 | NodercEndpointTracking | |||
| 1.3.6.1.4.1.2272.1.229 | Nodelem | |||
| 1.3.6.1.4.1.2272.1.230 | NodercCloudIq | |||
| 1.3.6.1.4.1.2272.2 | NodercA1100 | |||
| 1.3.6.1.4.1.2272.6 | NodercA1250 | |||
| 1.3.6.1.4.1.2272.7 | NodercA1150 | |||
| 1.3.6.1.4.1.2272.8 | NodercA1200 | |||
| 1.3.6.1.4.1.2272.9 | NodercA1050 | |||
| 1.3.6.1.4.1.2272.20 | NodercA740 | |||
| 1.3.6.1.4.1.2272.21 | NodercA750 | |||
| 1.3.6.1.4.1.2272.22 | NodercA790 | |||
| 1.3.6.1.4.1.2272.23 | NodercA750S | |||
| 1.3.6.1.4.1.2272.30 | NodercA8610 | |||
| 1.3.6.1.4.1.2272.31 | NodercA8606 | |||
| 1.3.6.1.4.1.2272.32 | NodercA8110 | |||
| 1.3.6.1.4.1.2272.33 | NodercA8106 | |||
| 1.3.6.1.4.1.2272.34 | NodercA8603 | |||
| 1.3.6.1.4.1.2272.35 | NodercA8103 | |||
| 1.3.6.1.4.1.2272.36 | NodercA8110co | |||
| 1.3.6.1.4.1.2272.37 | NodercA8610co | |||
| 1.3.6.1.4.1.2272.40 | NodercBayStack | |||
| 1.3.6.1.4.1.2272.42 | NodercA1424 | |||
| 1.3.6.1.4.1.2272.43 | NodercA1648 | |||
| 1.3.6.1.4.1.2272.44 | NodercA1612 | |||
| 1.3.6.1.4.1.2272.45 | NodercA1624 | |||
| 1.3.6.1.4.1.2272.46 | NodercRBS2402 | |||
| 1.3.6.1.4.1.2272.47 | NodercAtr8310 | |||
| 1.3.6.1.4.1.2272.48 | NodercAtr8306 | |||
| 1.3.6.1.4.1.2272.49 | NodercAtr8010 | |||
| 1.3.6.1.4.1.2272.50 | NodercAtr8006 | |||
| 1.3.6.1.4.1.2272.51 | NodercEsu1850 | |||
| 1.3.6.1.4.1.2272.52 | NodercEsu1850dc | |||
| 1.3.6.1.4.1.2272.53 | NodercEsu1800dc | |||
| 1.3.6.1.4.1.2272.54 | NodercA8611co | |||
| 1.3.6.1.4.1.2272.55 | NodercA8603r | |||
| 1.3.6.1.4.1.2272.56 | NodercERS8603r | |||
| 1.3.6.1.4.1.2272.57 | NodercA8803r | |||
| 1.3.6.1.4.1.2272.58 | NodercA8806 | |||
| 1.3.6.1.4.1.2272.59 | NodercA8810 | |||
| 1.3.6.1.4.1.2272.60 | NodercA8810co | |||
| 1.3.6.1.4.1.2272.201 | NodercVSP9012 | |||
| 1.3.6.1.4.1.2272.202 | NodercVSP4850GTS | |||
| 1.3.6.1.4.1.2272.203 | NodercVSP4850GTSPWRPLUS | |||
| 1.3.6.1.4.1.2272.204 | NodercVSP9010 | |||
| 1.3.6.1.4.1.2272.205 | NodercVSP8284XSQ | |||
| 1.3.6.1.4.1.2272.206 | NodercVSP4450GSXPWRPLUS | |||
| 1.3.6.1.4.1.2272.207 | NodercVSP4450GTXHTPWRPLUS | |||
| 1.3.6.1.4.1.2272.208 | NodercVSP8404 | |||
| 1.3.6.1.4.1.2272.209 | NodercVSP7254XSQ | |||
| 1.3.6.1.4.1.2272.210 | NodercVSP7254XTQ | |||
| 1.3.6.1.4.1.2272.211 | NodercVSP4450GSX | |||
| 1.3.6.1.4.1.2272.212 | NodercVSP8608 | |||
| 1.3.6.1.4.1.2272.213 | NodercDSG8032 | |||
| 1.3.6.1.4.1.2272.214 | NodercDSG6248CFP | |||
| 1.3.6.1.4.1.2272.215 | NodercDSG7648 | |||
| 1.3.6.1.4.1.2272.216 | NodercDSG7648C | |||
| 1.3.6.1.4.1.2272.217 | NodercDSG7480 | |||
| 1.3.6.1.4.1.2272.218 | NodercDSG6248 | |||
| 1.3.6.1.4.1.2272.219 | NodercDSG6248P | |||
| 1.3.6.1.4.1.2272.220 | NodercVSP8404C | |||
| 1.3.6.1.4.1.2272.221 | NodercDSG9032 | |||
| 1.3.6.1.4.1.2272.222 | NodercDSG8064 | |||
| 1.3.6.1.4.1.2272.223 | NodercVSP5030GSXuPWR | |||
| 1.3.6.1.4.1.2272.224 | NodercVSP5054GSXuPWR | |||
| 1.3.6.1.4.1.2272.227 | NodercVSP1100 | |||
| 1.3.6.1.4.1.2272.280887555 | NodercA8003 | |||
| 1.3.6.1.4.1.2272.280887558 | NodercA8006 | |||
| 1.3.6.1.4.1.2272.280887562 | NodercA8010 | |||
| 1.3.6.1.4.1.2272.1623064842 | NodercA8010co | |||
| 1.3.6.1.6 | NodesnmpV2 | |||
| 1.3.6.1.6.3 | NodesnmpModules | |||
| 1.3.6.1.6.3.1 | NodesnmpMIB | |||
| 1.3.6.1.6.3.1.1 | NodesnmpMIBObjects | |||
| 1.3.6.1.6.3.1.1.5 | NodesnmpTraps |
Type Definitions
| Name | Syntax | Status | Description |
|---|---|---|---|
| BridgeId | OCTET STRING (SIZE (8)) | current | An identifier that identifies the Bridge Id |
| CfmEgressActionFieldValue | INTEGER { egrOk (1), egrDown (2), egrBlocked (3), egrVid (4), egrNoTlv (5) } | current | Possible values returned in the egress action field |
| CfmIngressActionFieldValue | INTEGER { ingOk (1), ingDown (2), ingBlocked (3), ingVid (4), ingNoTlv (5) } | current | Possible values returned in the ingress action field. |
| CfmNameString | OCTET STRING (SIZE(0..32)) | current | CFM Name String |
| CfmRelayActionFieldValue | INTEGER { rlyHit (1), rlyFdb (2), rlyMpdb (3), unknown (4) } | current | Possible values the Relay action field can take. |
| DeviceStatus | INTEGER { invalid(1), down(2), up(3), disabled(4) } | current | Standard card states for slotted chassis based products |
| Dot1pValueSet | INTEGER { zero(0), one(1), two(2), three(3), four(4), five(5), six(6), seven(7), disable(8) } | current | 802.1p Values |
| DropPrecedence | INTEGER { low(0), medium(1), high(2) } | current | QOS Drop Precedence |
| DscpValueSet | INTEGER { phbcs0(0), val1(1), val2(2), val3(3), val4(4), val5(5), val6(6), val7(7), phbcs1(8), val9(9), phbaf11(10), val11(11), phbaf12(12), val13(13), phbaf13(14), val15(15), phbcs2(16), val17(17), phbaf21(18), val19(19), phbaf22(20), val21(21), phbaf23(22), val23(23), phbcs3(24), val25(25), phbaf31(26), val27(27), phbaf32(28), val29(29), phbaf33(30), val31(31), phbcs4(32), val33(33), phbaf41(34), val35(35), phbaf42(36), val37(37), phbaf43(38), val39(39), phbcs5(40), val41(41), val42(42), val43(43), val44(44), val45(45), phbef(46), val47(47), phbcs6(48), val49(49), val50(50), val51(51), val52(52), val53(53), val54(54), val55(55), phbcs7(56), val57(57), val58(58), val59(59), val60(60), val61(61), val62(62), val63(63), disableOrInvalid(64) } | current | DSCP Values |
| EnableValue | INTEGER { enable(1), disable(2) } | current | Enable/Disable value. |
| IdList | OCTET STRING | current | An identifier for a list of Ids. |
| InterfaceIndex | Integer32 (0..2147483647) | current | Port IfIndex. |
| InterfaceIndexOrZero | Integer32 (0..2147483647) | current | This textual convention is an extension of the InterfaceIndex convention. The latter defines a greater than zero value used to identify an interface or interface sub-layer in the managed system. This extension permits t… |
| IpAddressOriginTC | INTEGER { other(1), manual(2), dhcp(4), linklayer(5), random(6) } | current | The origin of the address. manual(2) indicates that the address was manually configured to a specified address, e.g. by user configuration. dhcp(4) indicates an address that was assigned to this system by a DHCP server.… |
| IpAddressStatusTC | INTEGER { preferred(1), deprecated(2), invalid(3), inaccessible(4), unknown(5), tentative(6), duplicate(7) } | current | The status of an address. Most of the states correspond to states from the IPv6 Stateless Address Autoconfiguration protocol [5]. The preferred(1) state indicates that this is a valid address that can appear as the dest… |
| IpIsisPlsbNodeNickName | OCTET STRING (SIZE(3)) | current | Plsb Node Nick name. |
| Ipv6NextHdr | INTEGER { hop-by-hop(0), icmpv4(1), igmpv4(2), ipInIp(4), tcp(6), egp(8), udp(17), ipv6(41), routing(43), frag(44), rsvp(46), ipsecESP(50), ipsecAh(51), icmpv6(58), noNxtHdr(59), destOptions(60), undefined(255) } | current | The ipv6 next header to look for. |
| IsisDefaultL1Metric | Integer32 (1..63) | current | Integer sub-range for default metric for single hop. ISO 10589 provides for 4 types of metric. Only the 'default' metric is used in practice. |
| IsisPlsbBvid | Integer32 (0..4096) | current | ISIS B-VLAN ID. |
| IsisPlsbBvidTieBrkAlg | INTEGER{ low-pathid(1), high-pathid(2) } | current | ISIS B-VLAN tie breaking algorithm. |
| IsisSystemID | OCTET STRING (SIZE(6)) | current | A system ID. |
| IsisWideL1Metric | Integer32 (1..16777215) | current | Wide Metric for IS Neighbors. ISO 10589 provides a 6 bit metric. Traffic Engineering extensions provide 24 bit metrics. |
| KhiStatusValue | INTEGER { green(1), yellow(2), red(3), adminDisable(4), notApplicable(5) } | current | Key Health Indication status defintion green(1): normal status. yellow(2): Alert. red(3): critical state. adminDisable(4): administately disable. notApplicable(5): either not config or not applicable |
| LaneList | OCTET STRING (SIZE (8)) | current | The string is 8 octets long, for a total of 64 bits. Each bit corresponds to a lane. Each I/O slot can have 4 or 6 lanes based on the card type. When a bit has the value one(1), the corresponding lane is a member of the… |
| LaneSet | OCTET STRING (SIZE (4)) | current | The set of lanes that are members of this Global Policer. The string is 4 octets long, for a total of 32 bits. Each bit corresponds to a laneId. Each I/O slot has 4 laneIds. When a bit has the value one(1), the correspo… |
| LldpPortId | OCTET STRING (SIZE (1..255)) | current | This TC describes the format of a port identifier string. Objects of this type are always used with an associated LldpPortIdSubtype object, which identifies the format of the particular LldpPortId object instance. If th… |
| LldpPortIdSubtype | INTEGER { interfaceAlias(1), portComponent(2), macAddress(3), networkAddress(4), interfaceName(5), agentCircuitId(6), local(7) } | current | This TC describes the source of a particular type of Port identifier used in the LLDP MIB. The enumeration 'interfaceAlias(1)' represents a port identifier based on the ifAlias MIB object, defined in IETF RFC 2863. The … |
| LPortSet | OCTET STRING (SIZE (0..256)) | current | The string is 256 octets long, for a total of 2048 bits. Each bit corresponds to a logical port (for example, WLAN tunnel). When a bit has the value one(1), the corresponding port is a member of the set. When a bit has … |
| MplsExpValueSet | INTEGER { zero(0), one(1), two(2), three(3), four(4), five(5), six(6), seven(7), disable(8) } | current | Mpls Exp Values |
| MplsLsrId | IpAddress | current | A unique identifier for an MPLS LSR. This MAY represent an IpV4 address. |
| PortSet | OCTET STRING (SIZE (0..255)) | current | The string is 88 octets long, for a total of 704 bits. Each bit corresponds to a port, as represented by its ifIndex value . When a bit has the value one(1), the corresponding port is a member of the set. When a bit has… |
| QosLevelValueSet | INTEGER { zero(0), one(1), two(2), three(3), four(4), five(5), six(6), seven(7), disable(8) } | current | QOS Levels |
| RcBfdTmpDiag | INTEGER { noDiagnostic(1), controlDetectionTimeExpired(2), echoFunctionFailed(3), neighborSignaledSessionDown(4), forwardingPlaneReset(5), pathDown(6), concatenatedPathDown(7), administrativelyDown(8), reverseConcatenatedPathDown (9) } | current | A common BFD diagnostic code. |
| RcBfdTmpInterval | Unsigned32 (1..4294967295) | current | The BFD interval delay in microseconds. |
| RcBfdTmpSessIndexTC | Unsigned32 (1..4294967295) | current | An index used to uniquely identify BFD sessions. |
| RcCfmPmOperState | INTEGER { rPmUp (1), rPmDown (2), rPmError (3), rPmSync (4) } | current | Operational state of the Performance Montitor form mep-rmep pair |
| RcCfmRemoteMepState | INTEGER { rMepIdle (1), rMepStart (2), rMepFailed (3), rMepOk (4) } | current | Operational state of the remote MEP state machine |
| RcIpBgpTmpAddressFamilyIdentifierTC | Unsigned32(0..65535) | current | The representation of a BGP AFI |
| RcIpBgpTmpIdentifierTC | OCTET STRING(SIZE (4)) | current | The representation of a BGP Identifier. BGP Identifiers are presented in the received network byte order. The BGP Identifier is displayed as if it is an IP address, even if it would be an illegal one. |
| RcIpBgpTmpSubsequentAddressFamilyIdentifierTC | Unsigned32(0..255) | current | The representation of a BGP SAFI |
| RcLongDisplayString | OCTET STRING (SIZE(0..65535)) | current | The semantics are identical to the standard DisplayString in RFC1213 and RFC2579, except for the longer length that is allowed with this TC. |
| RcVlanIdOrNone | Integer32 (1..4094) | current | Range of VLAN IDs supported for application |
| RcVlanMask | OCTET STRING (SIZE (0..512)) | current | Each VLAN ID is stored as a bit in a mask. The most-significant (left-most) bit represents Vlan ID 1. |
| RouterDeadRange | Integer32 (1..'FFFF'h) | current | The range of intervals in seconds that a routers hello must have not been seen before a neighbor declares the router down |
| SfDeviceMode | INTEGER { other (1), bme(2), se(3) } | current | Mode of given Fast SE Device either BME or SE |
| Timeout | Integer32 | current | An identifier that identifies the timeout value. |
| UpToRefreshInterval | Integer32 (1..1800) | current | The values one might be able to configure for variables bounded by the Refresh Interval |
| VPNId | OCTET STRING (SIZE (7)) | current | The purpose of a VPN-ID is to uniquely identify a VPN. The Global VPN Identifier format is: 3 octet VPN Authority, Organizationally Unique Identifier followed by 4 octet VPN index identifying VPN according to OUI |
| VrfIdentifier | Unsigned32 (0..512) | current | Virtual Router Identifier. VRFID 0 is reserved for the Administrative VRF and cannot be used to create VRF's. |
| VrfRpTriggerBitCode | BITS { rip (0), ospf(1), bgp (2), isis(3), pim (4), mvr (5), pim6 (6), msdp (7) } | current | This object represents Routing Protocol (RP) Triggers on a Virtual Router. The BITS represent an Action-code that specifies the action on the Routing Protocols. The actions are: initiate or shutdown. When encoding the R… |