NTWS-AP-CONFIG-MIB
195 objects
AP Configuration objects for Nortel Networks wireless switches. AP = Access Point; AC = Access Controller (wireless switch), the device that runs a SNMP Agent implementing this MIB. Copyright 2009 Nortel Networks. All rights reserved. This Nortel Networks SNMP Management Information Base Specification (Specification) embodies Nortel Networks' confidential and proprietary intellectual property. This Specification is supplied 'AS IS' and Nortel Networks makes no warranty, either express or implied, as to the use, operation, condition, or performance of the Specification.
Imported Objects
| NTWS-AP-TC | NtwsApAttachType NtwsApBias NtwsApFingerprint NtwsApLedMode NtwsApNum NtwsApPowerMode NtwsApRadioIndex NtwsApSerialNum NtwsChannelNum NtwsPowerLevel NtwsRadioAntennaLocation NtwsRadioChannelWidth NtwsRadioMode NtwsRadioType |
| NTWS-BASIC-TC | NtwsPhysPortNumberOrZero |
| NTWS-ROOT-MIB | ntwsMibs |
| SNMPv2-CONF | MODULE-COMPLIANCE OBJECT-GROUP |
| SNMPv2-SMI | MODULE-IDENTITY OBJECT-TYPE Unsigned32 |
| SNMPv2-TC | DisplayString RowStatus TEXTUAL-CONVENTION TruthValue |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.45.6.1.4.14 | IdentityntwsApConfigMib | AP Configuration objects for Nortel Networks wireless switches. AP = Access Point; AC = Access Controller (wireless switch), the device that runs a SNMP Agent … | ||
| 1.3.6.1.4.1.45.6.1.4.14.1 | NodentwsApConfigMibObjects | |||
| 1.3.6.1.4.1.45.6.1.4.14.1.2 | TablentwsApConfApConfigTable | not-accessible | current | A table describing all the APs currently configured on this AC. |
| 1.3.6.1.4.1.45.6.1.4.14.1.2.1 | RowntwsApConfApConfigEntry | not-accessible | current | Configuration for a particular AP that could be attached to the AC. |
| 1.3.6.1.4.1.45.6.1.4.14.1.2.1.1 | ColumnntwsApConfApConfigApNum | not-accessible | current | The Number of this AP (administratively assigned). |
| 1.3.6.1.4.1.45.6.1.4.14.1.2.1.2 | ColumnntwsApConfApConfigApAttachType | read-only | current | How this AP is attached to the AC (directly or via L2/L3 network). |
| 1.3.6.1.4.1.45.6.1.4.14.1.2.1.3 | ColumnntwsApConfApConfigPhysPortNum | read-only | current | Identifies the physical port used to attach this AP. Only valid for directly attached APs, otherwise will be zero. |
| 1.3.6.1.4.1.45.6.1.4.14.1.2.1.4 | ColumnntwsApConfApConfigApSerialNum | read-only | current | The Serial Number used to identify this AP. Only valid for network attached APs, otherwise will be a zero length string. |
| 1.3.6.1.4.1.45.6.1.4.14.1.2.1.5 | ColumnntwsApConfApConfigApModelName | read-only | current | The Model name of this AP. |
| 1.3.6.1.4.1.45.6.1.4.14.1.2.1.6 | ColumnntwsApConfApConfigFingerprint | read-only | current | The RSA key fingerprint configured on this AP (binary value: it is the MD5 hash of the public key of the RSA key pair). For directly attached APs the fingerpri… |
| 1.3.6.1.4.1.45.6.1.4.14.1.2.1.7 | ColumnntwsApConfApConfigBias | read-only | current | Bias (high/low/sticky). |
| 1.3.6.1.4.1.45.6.1.4.14.1.2.1.8 | ColumnntwsApConfApConfigApTimeout | read-only | current | The communication timeout for this AP, in seconds. |
| 1.3.6.1.4.1.45.6.1.4.14.1.2.1.9 | ColumnntwsApConfApConfigApName | read-only | current | The configured Name for this AP. |
| 1.3.6.1.4.1.45.6.1.4.14.1.2.1.10 | ColumnntwsApConfApConfigContact | read-only | current | The Contact information for this AP. |
| 1.3.6.1.4.1.45.6.1.4.14.1.2.1.11 | ColumnntwsApConfApConfigLocation | read-only | current | The Location information for this AP. |
| 1.3.6.1.4.1.45.6.1.4.14.1.2.1.12 | ColumnntwsApConfApConfigBlinkEnabled | read-only | current | Indicates whether the LED blink mode is enabled on this AP. |
| 1.3.6.1.4.1.45.6.1.4.14.1.2.1.13 | ColumnntwsApConfApConfigForceImageDownloadEnabled | read-only | current | Indicates whether this AP is forced to always download an image from the AC upon boot. |
| 1.3.6.1.4.1.45.6.1.4.14.1.2.1.14 | ColumnntwsApConfApConfigFirmwareUpgradeEnabled | read-only | current | Indicates whether automatic boot firmware upgrade is enabled on this AP. |
| 1.3.6.1.4.1.45.6.1.4.14.1.2.1.15 | ColumnntwsApConfApConfigLocalSwitchingEnabled | read-only | current | Indicates whether local switching is enabled on this AP. |
| 1.3.6.1.4.1.45.6.1.4.14.1.2.1.16 | ColumnntwsApConfApConfigPowerMode | read-only | current | The mode in which this AP is supplying power to its radios. |
| 1.3.6.1.4.1.45.6.1.4.14.1.2.1.17 | ColumnntwsApConfApConfigLedMode | read-only | current | LED Mode (auto/static/off). |
| 1.3.6.1.4.1.45.6.1.4.14.1.2.1.18 | ColumnntwsApConfApConfigDescription | read-only | current | The configured Description for this AP. |
| 1.3.6.1.4.1.45.6.1.4.14.1.3 | TablentwsApConfRadioConfigTable | not-accessible | current | A table describing the radios on all the APs currently configured on this AC. |
| 1.3.6.1.4.1.45.6.1.4.14.1.3.1 | RowntwsApConfRadioConfigEntry | not-accessible | current | Configuration for a particular Radio on a particular AP that could be attached to the AC. |
| 1.3.6.1.4.1.45.6.1.4.14.1.3.1.1 | ColumnntwsApConfRadioConfigApNum | not-accessible | current | The Number of the AP (administratively assigned). |
| 1.3.6.1.4.1.45.6.1.4.14.1.3.1.2 | ColumnntwsApConfRadioConfigRadioIndex | not-accessible | current | The number of this Radio on the AP. |
| 1.3.6.1.4.1.45.6.1.4.14.1.3.1.3 | ColumnntwsApConfRadioConfigRadioType | read-only | current | The configured Type of this radio (typeA, typeB, typeG, typeNA, typeNG) |
| 1.3.6.1.4.1.45.6.1.4.14.1.3.1.4 | ColumnntwsApConfRadioConfigRadioMode | read-only | current | The configured Mode of this radio (enabled/disabled/sentry) |
| 1.3.6.1.4.1.45.6.1.4.14.1.3.1.5 | ColumnntwsApConfRadioConfigRadioProfileName | read-only | current | Identifies the Radio Profile to be applied to this radio |
| 1.3.6.1.4.1.45.6.1.4.14.1.3.1.6 | ColumnntwsApConfRadioConfigChannel | read-only | current | The configured Channel Number of this radio. |
| 1.3.6.1.4.1.45.6.1.4.14.1.3.1.7 | ColumnntwsApConfRadioConfigTxPower | read-only | current | The configured Tx Power level of this radio. |
| 1.3.6.1.4.1.45.6.1.4.14.1.3.1.8 | ColumnntwsApConfRadioConfigAutoTuneMaxTxPower | read-only | current | The Maximum Tx Power that Auto Tune is allowed to set for this radio. |
| 1.3.6.1.4.1.45.6.1.4.14.1.3.1.9 | ColumnntwsApConfRadioConfigAntennaType | read-only | current | The configured Antenna Type for this radio. |
| 1.3.6.1.4.1.45.6.1.4.14.1.3.1.10 | ColumnntwsApConfRadioConfigAntennaLocation | read-only | current | The configured Antenna Location for this radio. |
| 1.3.6.1.4.1.45.6.1.4.14.1.3.1.11 | ColumnntwsApConfRadioConfigLoadBalancingEnabled | read-only | current | Indicates whether RF Load Balancing is enabled on this radio. |
| 1.3.6.1.4.1.45.6.1.4.14.1.3.1.12 | ColumnntwsApConfRadioConfigLoadBalancingGroup | read-only | current | Indicates the RF Load Balancing group that this radio is assigned to. |
| 1.3.6.1.4.1.45.6.1.4.14.1.3.1.13 | ColumnntwsApConfRadioConfigLoadRebalancingEnabled | read-only | current | Indicates whether RF Load Rebalancing is enabled for this radio. |
| 1.3.6.1.4.1.45.6.1.4.14.1.4 | TablentwsApConfApTemplateConfigTable | not-accessible | current | A table describing all the AP Templates currently configured on this AC. |
| 1.3.6.1.4.1.45.6.1.4.14.1.4.1 | RowntwsApConfApTemplateConfigEntry | not-accessible | current | Template configuration for APs that could be attached to the AC. |
| 1.3.6.1.4.1.45.6.1.4.14.1.4.1.1 | ColumnntwsApConfApTemplConfApTemplateName | not-accessible | current | AP Template Name. |
| 1.3.6.1.4.1.45.6.1.4.14.1.4.1.2 | ColumnntwsApConfApTemplConfApTemplateEnabled | read-only | current | Indicates whether this AP Template is Enabled (can be used for bringing up APs). |
| 1.3.6.1.4.1.45.6.1.4.14.1.4.1.3 | ColumnntwsApConfApTemplConfBias | read-only | current | Bias (high/low/sticky). |
| 1.3.6.1.4.1.45.6.1.4.14.1.4.1.4 | ColumnntwsApConfApTemplConfApTimeout | read-only | current | The communication timeout for this AP Template, in seconds. |
| 1.3.6.1.4.1.45.6.1.4.14.1.4.1.5 | ColumnntwsApConfApTemplConfBlinkEnabled | read-only | current | Indicates whether the LED blink mode is enabled on this AP Template. |
| 1.3.6.1.4.1.45.6.1.4.14.1.4.1.6 | ColumnntwsApConfApTemplConfForceImageDownloadEnabled | read-only | current | Indicates whether this AP is forced to always download an image from the AC upon boot. |
| 1.3.6.1.4.1.45.6.1.4.14.1.4.1.7 | ColumnntwsApConfApTemplConfFirmwareUpgradeEnabled | read-only | current | Indicates whether automatic boot firmware upgrade is enabled on this AP Template. |
| 1.3.6.1.4.1.45.6.1.4.14.1.4.1.8 | ColumnntwsApConfApTemplConfLocalSwitchingEnabled | read-only | current | Indicates whether local switching is enabled on this AP Template. |
| 1.3.6.1.4.1.45.6.1.4.14.1.4.1.9 | ColumnntwsApConfApTemplConfPowerMode | read-only | current | The mode in which an AP using this Template will be supplying power to its radios. |
| 1.3.6.1.4.1.45.6.1.4.14.1.4.1.10 | ColumnntwsApConfApTemplConfLedMode | read-only | current | The LED Mode (auto/static/off) for an AP using this Template. |
| 1.3.6.1.4.1.45.6.1.4.14.1.5 | TablentwsApConfApTemplateRadioConfigTable | not-accessible | current | A table describing the radios for all the AP Templates currently configured on this AC. |
| 1.3.6.1.4.1.45.6.1.4.14.1.5.1 | RowntwsApConfApTemplateRadioConfigEntry | not-accessible | current | Template configuration for a particular Radio index on an AP Template configured on this AC. |
| 1.3.6.1.4.1.45.6.1.4.14.1.5.1.1 | ColumnntwsApConfApTemRadioConfApTemplateName | not-accessible | current | AP Template Name. |
| 1.3.6.1.4.1.45.6.1.4.14.1.5.1.2 | ColumnntwsApConfApTemRadioConfRadioIndex | not-accessible | current | The number of this Radio on the AP Template. |
| 1.3.6.1.4.1.45.6.1.4.14.1.5.1.3 | ColumnntwsApConfApTemRadioConfRadioMode | read-only | current | The configured mode of a radio using this Template (enabled/disabled/sentry) |
| 1.3.6.1.4.1.45.6.1.4.14.1.5.1.4 | ColumnntwsApConfApTemRadioConfRadioProfileName | read-only | current | Identifies the Radio Profile to be applied to a radio using this Template |
| 1.3.6.1.4.1.45.6.1.4.14.1.5.1.5 | ColumnntwsApConfApTemRadioConfAutoTuneMaxTxPower | read-only | current | The Maximum Tx Power that Auto Tune will be allowed to set for a radio using this Template. |
| 1.3.6.1.4.1.45.6.1.4.14.1.5.1.6 | ColumnntwsApConfApTemRadioConfLoadBalancingEnabled | read-only | current | Indicates whether RF Load Balancing will be enabled on a radio using this Template. |
| 1.3.6.1.4.1.45.6.1.4.14.1.5.1.7 | ColumnntwsApConfApTemRadioConfLoadBalancingGroup | read-only | current | Indicates the RF Load Balancing group that a radio using this Template will be assigned to. |
| 1.3.6.1.4.1.45.6.1.4.14.1.5.1.8 | ColumnntwsApConfApTemRadioConfLoadRebalancingEnabled | read-only | current | Indicates whether RF Load Rebalancing will be enabled for a radio using this Template. |
| 1.3.6.1.4.1.45.6.1.4.14.1.6 | TablentwsApConfRadioProfileTable | not-accessible | current | A table describing the Radio Profiles currently configured on this AC. |
| 1.3.6.1.4.1.45.6.1.4.14.1.6.1 | RowntwsApConfRadioProfileEntry | not-accessible | current | Configuration for a particular Radio Profile. |
| 1.3.6.1.4.1.45.6.1.4.14.1.6.1.1 | ColumnntwsApConfRadioProfRadioProfileName | not-accessible | current | Name of this radio profile. |
| 1.3.6.1.4.1.45.6.1.4.14.1.6.1.2 | ColumnntwsApConfRadioProfBeaconInterval | read-only | current | Beacon Interval, time in thousandths of a second, for this radio profile. |
| 1.3.6.1.4.1.45.6.1.4.14.1.6.1.3 | ColumnntwsApConfRadioProfDtimInterval | read-only | current | The number of times after every beacon that each AP radio in a radio profile sends a delivery traffic indication map (DTIM), for the AP radios using this radio… |
| 1.3.6.1.4.1.45.6.1.4.14.1.6.1.4 | ColumnntwsApConfRadioProfChannelWidth11na | read-only | current | 802.11n Channel Width for the AP radios using this radio profile. |
| 1.3.6.1.4.1.45.6.1.4.14.1.6.1.5 | ColumnntwsApConfRadioProfMaxTxLifetime | read-only | current | The maximum transmit threshold for the AP radios using this radio profile. |
| 1.3.6.1.4.1.45.6.1.4.14.1.6.1.6 | ColumnntwsApConfRadioProfMaxRxLifetime | read-only | current | The maximum receive threshold for the AP radios using this radio profile. |
| 1.3.6.1.4.1.45.6.1.4.14.1.6.1.7 | ColumnntwsApConfRadioProfRtsThreshold | read-only | current | The RTS threshold for the AP radios using this radio profile. |
| 1.3.6.1.4.1.45.6.1.4.14.1.6.1.8 | ColumnntwsApConfRadioProfFragThreshold | read-only | current | The fragmentation threshold for the AP radios using this radio profile. |
| 1.3.6.1.4.1.45.6.1.4.14.1.6.1.9 | ColumnntwsApConfRadioProfLongXmitPreambleEnabled | read-only | current | Indicates whether an 802.11b/g AP radio using this radio profile transmits Long Preamble. |
| 1.3.6.1.4.1.45.6.1.4.14.1.6.1.10 | ColumnntwsApConfRadioProfCountermeasuresMode | read-only | current | Countermeasures Mode for the AP radios using this radio profile. |
| 1.3.6.1.4.1.45.6.1.4.14.1.6.1.11 | ColumnntwsApConfRadioProfRFScanMode | read-only | current | RF Scanning Mode for the AP radios using this radio profile. |
| 1.3.6.1.4.1.45.6.1.4.14.1.6.1.12 | ColumnntwsApConfRadioProfRFScanChannelScope | read-only | current | RF scanning Channel Scope for the AP radios using this radio profile. |
| 1.3.6.1.4.1.45.6.1.4.14.1.6.1.13 | ColumnntwsApConfRadioProfRFScanCTSEnabled | read-only | current | Indicates whether the AP radios using this radio profile send CTS To Self packet before going off channel. |
| 1.3.6.1.4.1.45.6.1.4.14.1.6.1.14 | ColumnntwsApConfRadioProfAutoTune11aChannelRange | read-only | current | The allowable 802.11a Channel Range used by Auto-Tune for the AP radios using this radio profile. |
| 1.3.6.1.4.1.45.6.1.4.14.1.6.1.15 | ColumnntwsApConfRadioProfAutoTuneIgnoreClientsEnabled | read-only | current | Indicates whether the AP radios using this radio profile Ignore Client connections in Auto-Tune channel selections. |
| 1.3.6.1.4.1.45.6.1.4.14.1.6.1.16 | ColumnntwsApConfRadioProfAutoTuneChannelEnabled | read-only | current | Indicates whether Channel Auto-Tuning is enabled for the AP radios using this radio profile. |
| 1.3.6.1.4.1.45.6.1.4.14.1.6.1.17 | ColumnntwsApConfRadioProfAutoTuneChannelHolddownInterval | read-only | current | Minimum Interval (in seconds) between Channel changes due to Auto-Tuning, for the AP radios using this radio profile. |
| 1.3.6.1.4.1.45.6.1.4.14.1.6.1.18 | ColumnntwsApConfRadioProfAutoTuneChannelChangeInterval | read-only | current | The interval (in seconds) at which RF Auto-Tuning decides whether to Change the Channel for the AP radios using this radio profile. |
| 1.3.6.1.4.1.45.6.1.4.14.1.6.1.19 | ColumnntwsApConfRadioProfAutoTunePowerEnabled | read-only | current | Indicates whether Power Auto-Tuning is enabled for the AP radios using this radio profile. |
| 1.3.6.1.4.1.45.6.1.4.14.1.6.1.20 | ColumnntwsApConfRadioProfAutoTunePowerRampInterval | read-only | current | Minimum Interval (in seconds) between Power changes due to Auto-Tuning, for the AP radios using this radio profile. |
| 1.3.6.1.4.1.45.6.1.4.14.1.6.1.21 | ColumnntwsApConfRadioProfAutoTunePowerChangeInterval | read-only | current | The interval (in seconds) at which RF Auto-Tuning decides whether to Change the Power for the AP radios using this radio profile. |
| 1.3.6.1.4.1.45.6.1.4.14.1.6.1.22 | ColumnntwsApConfRadioProfFairQueuingEnabled | read-only | current | Indicates whether weighted Fair Queuing is enabled for this radio profile. |
| 1.3.6.1.4.1.45.6.1.4.14.1.6.1.23 | ColumnntwsApConfRadioProfCacBackgroundACMandatory | read-only | current | Indicates whether Admission Control for Background traffic is Mandatory for the AP radios using this radio profile. |
| 1.3.6.1.4.1.45.6.1.4.14.1.6.1.24 | ColumnntwsApConfRadioProfCacBackgroundMaxUtilization | read-only | current | Maximum admission control limit for Background traffic, for the AP radios using this radio profile. |
| 1.3.6.1.4.1.45.6.1.4.14.1.6.1.25 | ColumnntwsApConfRadioProfCacBackgroundPolicingEnabled | read-only | current | Indicates that admission control Policing for Background traffic is enabled, for the AP radios using this radio profile. |
| 1.3.6.1.4.1.45.6.1.4.14.1.6.1.26 | ColumnntwsApConfRadioProfCacBestEffortACMandatory | read-only | current | Indicates that Admission Control for Best Effort traffic is Mandatory for the AP radios using this radio profile. |
| 1.3.6.1.4.1.45.6.1.4.14.1.6.1.27 | ColumnntwsApConfRadioProfCacBestEffortMaxUtilization | read-only | current | Maximum admission control limit for Best Effort traffic, for the AP radios using this radio profile. |
| 1.3.6.1.4.1.45.6.1.4.14.1.6.1.28 | ColumnntwsApConfRadioProfCacBestEffortPolicingEnabled | read-only | current | Indicates that admission control Policing for Best Effort traffic is enabled, for the AP radios using this radio profile. |
| 1.3.6.1.4.1.45.6.1.4.14.1.6.1.29 | ColumnntwsApConfRadioProfCacVideoACMandatory | read-only | current | Indicates that Admission Control for Video traffic is Mandatory for the AP radios using this radio profile. |
| 1.3.6.1.4.1.45.6.1.4.14.1.6.1.30 | ColumnntwsApConfRadioProfCacVideoMaxUtilization | read-only | current | Maximum admission control limit for Video traffic, for the AP radios using this radio profile. |
| 1.3.6.1.4.1.45.6.1.4.14.1.6.1.31 | ColumnntwsApConfRadioProfCacVideoPolicingEnabled | read-only | current | Indicates that admission control Policing for Video traffic is enabled, for the AP radios using this radio profile. |
| 1.3.6.1.4.1.45.6.1.4.14.1.6.1.32 | ColumnntwsApConfRadioProfCacVoiceACMandatory | read-only | current | Indicates that Admission Control for Voice traffic is Mandatory for the AP radios using this radio profile. |
| 1.3.6.1.4.1.45.6.1.4.14.1.6.1.33 | ColumnntwsApConfRadioProfCacVoiceMaxUtilization | read-only | current | Maximum admission control limit for Voice traffic, for the AP radios using this radio profile. |
| 1.3.6.1.4.1.45.6.1.4.14.1.6.1.34 | ColumnntwsApConfRadioProfCacVoicePolicingEnabled | read-only | current | Indicates that admission control Policing for Voice traffic is enabled, for the AP radios using this radio profile. |
| 1.3.6.1.4.1.45.6.1.4.14.1.6.1.35 | ColumnntwsApConfRadioProfRfidTagEnabled | read-only | current | Indicates whether an AP radio using this radio profile is enabled to function as location receivers in an AeroScout Visibility System. |
| 1.3.6.1.4.1.45.6.1.4.14.1.6.1.36 | ColumnntwsApConfRadioProfWmmPowerSaveEnabled | read-only | current | Indicates whether the AP radios using this radio profile enable power save mode on WMM clients. |
| 1.3.6.1.4.1.45.6.1.4.14.1.6.1.37 | ColumnntwsApConfRadioProfRateEnforcementEnabled | read-only | current | Indicates whether data rates are enforced for the AP radios using this radio profile, which means that a connecting client must transmit at one of the mandator… |
| 1.3.6.1.4.1.45.6.1.4.14.1.6.1.38 | ColumnntwsApConfRadioProfDfsChannelsEnabled | read-only | current | Indicates that the AP radios using this radio profile use DFS channels to meet regulatory requirements. |
| 1.3.6.1.4.1.45.6.1.4.14.1.7 | TablentwsApConfRadioProfServiceProfileTable | not-accessible | current | A table describing the currently configured connections between Radio Profiles and Service Profiles. |
| 1.3.6.1.4.1.45.6.1.4.14.1.7.1 | RowntwsApConfRadioProfServiceProfileEntry | not-accessible | current | Connection between a Radio Profile and a Service Profile, currently configured on the AC. |
| 1.3.6.1.4.1.45.6.1.4.14.1.7.1.1 | ColumnntwsApConfRpServpRadioProfileName | not-accessible | current | Name of this Radio Profile. |
| 1.3.6.1.4.1.45.6.1.4.14.1.7.1.2 | ColumnntwsApConfRpServpServiceProfileName | not-accessible | current | Name of a Service Profile connected to this Radio Profile. |
| 1.3.6.1.4.1.45.6.1.4.14.1.7.1.3 | ColumnntwsApConfRpServpRowStatus | read-create | current | This object is used to create a new row or delete an existing row in this table. To create a row, set this object to 'createAndGo'. To delete a row, set this o… |
| 1.3.6.1.4.1.45.6.1.4.14.1.8 | TablentwsApConfRadioProfSnoopFilterTable | not-accessible | current | A table describing the currently configured connections between Radio Profiles and Snoop Filters. |
| 1.3.6.1.4.1.45.6.1.4.14.1.8.1 | RowntwsApConfRadioProfSnoopFilterEntry | not-accessible | current | Connection between a Radio Profile and a Snoop Filter, currently configured on the AC. |
| 1.3.6.1.4.1.45.6.1.4.14.1.8.1.1 | ColumnntwsApConfRpSnoopfRadioProfileName | not-accessible | current | Name of this Radio Profile. |
| 1.3.6.1.4.1.45.6.1.4.14.1.8.1.2 | ColumnntwsApConfRpSnoopfSnoopFilterName | not-accessible | current | Name of a Snoop Filter connected to this Radio Profile. |
| 1.3.6.1.4.1.45.6.1.4.14.1.8.1.3 | ColumnntwsApConfRpSnoopfRowStatus | read-create | current | This object is used to create a new row or delete an existing row in this table. To create a row, set this object to 'createAndGo'. To delete a row, set this o… |
| 1.3.6.1.4.1.45.6.1.4.14.1.9 | TablentwsApConfServiceProfileTable | not-accessible | current | A table describing the Service Profiles currently configured on this AC. |
| 1.3.6.1.4.1.45.6.1.4.14.1.9.1 | RowntwsApConfServiceProfileEntry | not-accessible | current | Configuration for a particular Service Profile. |
| 1.3.6.1.4.1.45.6.1.4.14.1.9.1.1 | ColumnntwsApConfServProfServiceProfileName | not-accessible | current | Name of this service profile |
| 1.3.6.1.4.1.45.6.1.4.14.1.9.1.2 | ColumnntwsApConfServProfSsidType | read-only | current | The type of this service profile (clear/crypto). |
| 1.3.6.1.4.1.45.6.1.4.14.1.9.1.3 | ColumnntwsApConfServProfBeaconEnabled | read-only | current | Indicates whether beacons are enabled for this service profile. |
| 1.3.6.1.4.1.45.6.1.4.14.1.9.1.4 | ColumnntwsApConfServProf11naMode | read-only | current | Indicates the 802.11n (na) mode for this service profile. |
| 1.3.6.1.4.1.45.6.1.4.14.1.9.1.5 | ColumnntwsApConfServProf11ngMode | read-only | current | Indicates the 802.11n (ng) mode for this service profile. |
| 1.3.6.1.4.1.45.6.1.4.14.1.9.1.6 | ColumnntwsApConfServProf11nShortGuardIntervalEnabled | read-only | current | Indicates whether short guard interval is enabled for this service profile. |
| 1.3.6.1.4.1.45.6.1.4.14.1.9.1.7 | ColumnntwsApConfServProf11nFrameAggregation | read-only | current | Indicates the Frame Aggregation mode for this service profile. |
| 1.3.6.1.4.1.45.6.1.4.14.1.9.1.8 | ColumnntwsApConfServProf11nMsduMaxLength | read-only | current | The maximum MSDU length for this service profile. |
| 1.3.6.1.4.1.45.6.1.4.14.1.9.1.9 | ColumnntwsApConfServProf11nMpduMaxLength | read-only | current | The maximum MPDU length for this service profile. |
| 1.3.6.1.4.1.45.6.1.4.14.1.9.1.10 | ColumnntwsApConfServProfAuthFallthru | read-only | current | The authentication type to be attempted for users who do not match a 802.1X or MAC authentication rule, for this service profile. |
| 1.3.6.1.4.1.45.6.1.4.14.1.9.1.11 | ColumnntwsApConfServProfWebAAAForm | read-only | current | The custom login page that loads for WebAAA users, for this service profile. |
| 1.3.6.1.4.1.45.6.1.4.14.1.9.1.12 | ColumnntwsApConfServProfSharedKeyAuthEnabled | read-only | current | Indicates whether shared-key authentication is enabled for this service profile. |
| 1.3.6.1.4.1.45.6.1.4.14.1.9.1.13 | ColumnntwsApConfServProfWpaIeEnabled | read-only | current | Indicates whether WPA IE beaconing is enabled for this service profile. |
| 1.3.6.1.4.1.45.6.1.4.14.1.9.1.14 | ColumnntwsApConfServProfWpaIeCipherTkipEnabled | read-only | current | Indicates whether TKIP cipher is advertised in WPA IE, for this service profile. |
| 1.3.6.1.4.1.45.6.1.4.14.1.9.1.15 | ColumnntwsApConfServProfWpaIeCipherCcmpEnabled | read-only | current | Indicates whether CCMP cipher is advertised in WPA IE, for this service profile. |
| 1.3.6.1.4.1.45.6.1.4.14.1.9.1.16 | ColumnntwsApConfServProfWpaIeCipherWep40Enabled | read-only | current | Indicates whether WEP-40 cipher is advertised in WPA IE, for this service profile. |
| 1.3.6.1.4.1.45.6.1.4.14.1.9.1.17 | ColumnntwsApConfServProfWpaIeCipherWep104Enabled | read-only | current | Indicates whether WEP-104 cipher is advertised in WPA IE, for this service profile. |
| 1.3.6.1.4.1.45.6.1.4.14.1.9.1.18 | ColumnntwsApConfServProfWpaIeAuthDot1xEnabled | read-only | current | Indicates whether 802.1X authentication is advertised in WPA IE, for this service profile. |
| 1.3.6.1.4.1.45.6.1.4.14.1.9.1.19 | ColumnntwsApConfServProfWpaIeAuthPskEnabled | read-only | current | Indicates whether Pre-Shared Key authentication is advertised in WPA IE, for this service profile. |
| 1.3.6.1.4.1.45.6.1.4.14.1.9.1.20 | ColumnntwsApConfServProfRsnIeEnabled | read-only | current | Indicates whether RSN IE beaconing is enabled for this service profile. |
| 1.3.6.1.4.1.45.6.1.4.14.1.9.1.21 | ColumnntwsApConfServProfRsnIeCipherTkipEnabled | read-only | current | Indicates whether TKIP cipher is advertised in RSN IE, for this service profile. |
| 1.3.6.1.4.1.45.6.1.4.14.1.9.1.22 | ColumnntwsApConfServProfRsnIeCipherCcmpEnabled | read-only | current | Indicates whether CCMP cipher is advertised in RSN IE, for this service profile. |
| 1.3.6.1.4.1.45.6.1.4.14.1.9.1.23 | ColumnntwsApConfServProfRsnIeCipherWep40Enabled | read-only | current | Indicates whether WEP-40 cipher is advertised in RSN IE, for this service profile. |
| 1.3.6.1.4.1.45.6.1.4.14.1.9.1.24 | ColumnntwsApConfServProfRsnIeCipherWep104Enabled | read-only | current | Indicates whether WEP-104 cipher is advertised in RSN IE, for this service profile. |
| 1.3.6.1.4.1.45.6.1.4.14.1.9.1.25 | ColumnntwsApConfServProfRsnIeAuthDot1xEnabled | read-only | current | Indicates whether 802.1X authentication is advertised in RSN IE, for this service profile. |
| 1.3.6.1.4.1.45.6.1.4.14.1.9.1.26 | ColumnntwsApConfServProfRsnIeAuthPskEnabled | read-only | current | Indicates whether Pre-Shared Key authentication is advertised in RSN IE, for this service profile. |
| 1.3.6.1.4.1.45.6.1.4.14.1.9.1.27 | ColumnntwsApConfServProfTkipMicCountermeasuresTime | read-only | current | Indicates the TKIP MIC countermeasures time in milliseconds for this service profile. This is the length of time that AP radios use countermeasures if two Mess… |
| 1.3.6.1.4.1.45.6.1.4.14.1.9.1.28 | ColumnntwsApConfServProfMaxBandwidthKbps | read-only | current | The bandwidth limit for this service profile, in Kbits/second. A value of zero means unlimited. |
| 1.3.6.1.4.1.45.6.1.4.14.1.9.1.29 | ColumnntwsApConfServProfCacMode | read-only | current | The Call Admission Control (CAC) mode, for this service profile. |
| 1.3.6.1.4.1.45.6.1.4.14.1.9.1.30 | ColumnntwsApConfServProfCacSessCount | read-only | current | The maximum number of active sessions a radio can have when session-based CAC is enabled, for this service profile. |
| 1.3.6.1.4.1.45.6.1.4.14.1.9.1.31 | ColumnntwsApConfServProfUserIdleTimeout | read-only | current | The number of seconds MSS has a session available for a client not sending data and is not responding to keepalives (idle-client probes). If the timer expires,… |
| 1.3.6.1.4.1.45.6.1.4.14.1.9.1.32 | ColumnntwsApConfServProfIdleClientProbingEnabled | read-only | current | Indicates whether the AC radio sends a unicast null-data frame to each client every 10 seconds, for this service profile. |
| 1.3.6.1.4.1.45.6.1.4.14.1.9.1.33 | ColumnntwsApConfServProfShortRetryCount | read-only | current | The number of times a radio can send a short unicast frame without receiving an acknowledgment, for this service profile. |
| 1.3.6.1.4.1.45.6.1.4.14.1.9.1.34 | ColumnntwsApConfServProfLongRetryCount | read-only | current | The number of times a radio can send a long unicast frame without receiving an acknowledgment, for this service profile. |
| 1.3.6.1.4.1.45.6.1.4.14.1.9.1.35 | ColumnntwsApConfServProfProxyArpEnabled | read-only | current | Indicates whether proxy ARP is enabled for this service profile. |
| 1.3.6.1.4.1.45.6.1.4.14.1.9.1.36 | ColumnntwsApConfServProfDhcpRestrictEnabled | read-only | current | Indicates whether only DHCP traffic is allowed until a newly associated client has been authenticated and authorized, for this service profile. |
| 1.3.6.1.4.1.45.6.1.4.14.1.9.1.37 | ColumnntwsApConfServProfNoBroadcastEnabled | read-only | current | Indicates whether broadcast ARP and DHCP packets are converted to unicast for this service profile. |
| 1.3.6.1.4.1.45.6.1.4.14.1.9.1.38 | ColumnntwsApConfServProfSygateOnDemandEnabled | read-only | current | Indicates whether Sygate On-Demand Manager (SODA Manager) is enabled for this service profile. |
| 1.3.6.1.4.1.45.6.1.4.14.1.9.1.39 | ColumnntwsApConfServProfEnforceChecksEnabled | read-only | current | Indicates whether Enforcement of the SODA security checks is enabled for this service profile. |
| 1.3.6.1.4.1.45.6.1.4.14.1.9.1.40 | ColumnntwsApConfServProfSodaRemediationAcl | read-only | current | Remediation page ACL to apply to the client when the failure page is loaded, for this service profile. |
| 1.3.6.1.4.1.45.6.1.4.14.1.9.1.41 | ColumnntwsApConfServProfSodaSuccessPage | read-only | current | Success page that is displayed on the client when a client successfully runs the checks performed by the SODA agent, for this service profile. |
| 1.3.6.1.4.1.45.6.1.4.14.1.9.1.42 | ColumnntwsApConfServProfSodaFailurePage | read-only | current | Failure page that is displayed on the client when the SODA agent checks fail, for this service profile. |
| 1.3.6.1.4.1.45.6.1.4.14.1.9.1.43 | ColumnntwsApConfServProfSodaLogoutPage | read-only | current | The page to load when a client closes the SODA virtual desktop and logs out of the network, for this service profile. |
| 1.3.6.1.4.1.45.6.1.4.14.1.9.1.44 | ColumnntwsApConfServProfSodaAgentDirectory | read-only | current | Specifies a different directory for the SODA agent files used for this service profile. |
| 1.3.6.1.4.1.45.6.1.4.14.1.9.1.45 | ColumnntwsApConfServProfWebPortalSessionTimeout | read-only | current | Time interval, in seconds, for which a Web Portal WebAAA session remains in the Deassociated state before being terminated automatically, for this service prof… |
| 1.3.6.1.4.1.45.6.1.4.14.1.9.1.46 | ColumnntwsApConfServProfWebPortalAcl | read-only | current | Name of ACL used for filtering traffic for Web Portal users during authentication, for this service profile. |
| 1.3.6.1.4.1.45.6.1.4.14.1.9.1.47 | ColumnntwsApConfServProfWebPortalLogoutEnabled | read-only | current | Indicates whether the Web Portal logout functionality is enabled for this service profile. |
| 1.3.6.1.4.1.45.6.1.4.14.1.9.1.48 | ColumnntwsApConfServProfWebPortalLogoutUrl | read-only | current | Indicates the Web Portal Logout URL for this service profile. |
| 1.3.6.1.4.1.45.6.1.4.14.1.9.1.49 | ColumnntwsApConfServProfKeepInitialVlanEnabled | read-only | current | Indicates whether, after roaming, the user keeps the VLAN assigned from the first connection, for this service profile. |
| 1.3.6.1.4.1.45.6.1.4.14.1.9.1.50 | ColumnntwsApConfServProfMeshModeEnabled | read-only | current | Indicates whether wireless mesh between APs is enabled for this service profile. |
| 1.3.6.1.4.1.45.6.1.4.14.1.9.1.51 | ColumnntwsApConfServProfBridgingEnabled | read-only | current | Indicates whether wireless bridging of traffic between APs is enabled for this service profile. |
| 1.3.6.1.4.1.45.6.1.4.14.1.9.1.52 | ColumnntwsApConfServProfLoadBalanceExemptEnabled | read-only | current | Indicates whether this service profile is exempted from load balancing. |
| 1.3.6.1.4.1.45.6.1.4.14.1.10 | TablentwsApConfSnoopFilterTable | not-accessible | current | A table describing the Snoop Filters currently configured on this AC. |
| 1.3.6.1.4.1.45.6.1.4.14.1.10.1 | RowntwsApConfSnoopFilterEntry | not-accessible | current | Configuration for a particular Snoop Filter. |
| 1.3.6.1.4.1.45.6.1.4.14.1.10.1.1 | ColumnntwsApConfSnoopFilterName | not-accessible | current | Name of this snoop filter. |
| 1.3.6.1.4.1.45.6.1.4.14.1.10.1.2 | ColumnntwsApConfSnoopFilterEnabled | read-only | current | Indicates whether this snoop filter is enabled. |
| 1.3.6.1.4.1.45.6.1.4.14.2 | NodentwsApConfigConformance | |||
| 1.3.6.1.4.1.45.6.1.4.14.2.1 | NodentwsApConfigCompliances | |||
| 1.3.6.1.4.1.45.6.1.4.14.2.1.1 | CompliancentwsApConfigCompliance | read-only | current | The compliance statement for devices that implement AP Config MIB. |
| 1.3.6.1.4.1.45.6.1.4.14.2.2 | NodentwsApConfigGroups | |||
| 1.3.6.1.4.1.45.6.1.4.14.2.2.1 | GroupntwsApConfApConfigTableGroup | current | Group of columnar objects implemented to provide AP Configuration info in releases 7.1 and greater. | |
| 1.3.6.1.4.1.45.6.1.4.14.2.2.2 | GroupntwsApConfRadioConfigTableGroup | current | Group of columnar objects implemented to provide Radio Configuration info in releases 7.1 and greater. | |
| 1.3.6.1.4.1.45.6.1.4.14.2.2.3 | GroupntwsApConfApTemplateConfigTableGroup | current | Group of columnar objects implemented to provide AP Configuration Template info in releases 7.1 and greater. | |
| 1.3.6.1.4.1.45.6.1.4.14.2.2.4 | GroupntwsApConfApTemplateRadioConfigTableGroup | current | Group of columnar objects implemented to provide Radio Configuration Template info in releases 7.1 and greater. | |
| 1.3.6.1.4.1.45.6.1.4.14.2.2.5 | GroupntwsApConfRadioProfileTableGroup | current | Group of columnar objects implemented to provide Radio Profile configuration info in releases 7.1 and greater. | |
| 1.3.6.1.4.1.45.6.1.4.14.2.2.6 | GroupntwsApConfRadioProfServiceProfileTableGroup | current | Group of columnar objects implemented to provide Service Profiles associated to each Radio Profile in releases 7.1 and greater. | |
| 1.3.6.1.4.1.45.6.1.4.14.2.2.7 | GroupntwsApConfRadioProfSnoopFilterTableGroup | current | Group of columnar objects implemented to provide Snoop Filters associated to each Radio Profile in releases 7.1 and greater. | |
| 1.3.6.1.4.1.45.6.1.4.14.2.2.8 | GroupntwsApConfServiceProfileTableGroup | current | Group of columnar objects implemented to provide Service Profile configuration info in releases 7.1 and greater. | |
| 1.3.6.1.4.1.45.6.1.4.14.2.2.9 | GroupntwsApConfSnoopFilterTableGroup | current | Group of columnar objects implemented to provide Snoop Filter configuration info in releases 7.1 and greater. |
Type Definitions
| Name | Syntax | Status | Description |
|---|---|---|---|
| NtwsApTemplateName | OCTET STRING (SIZE (1..32)) | current | AP Template Name, consists of printable ASCII characters between 0x21 (!), and 0x7d (}) with no leading, embedded, or trailing space. Cannot be a zero length string. |
| NtwsRadioProfileAutoTuneChannelRange | INTEGER { all-bands (1), lower-bands (2) } | current | Enumeration of Auto-Tune channel ranges for a radio profile. |
| NtwsRadioProfileCountermeasuresMode | INTEGER { none (1), all (2), rogue (3), configured (4) } | current | Enumeration of the Countermeasure modes for a radio profile. |
| NtwsRadioProfileName | OCTET STRING (SIZE (1..16)) | current | Radio Profile Name, consists of printable ASCII characters between 0x21 (!), and 0x7d (}) with no leading, embedded, or trailing space. Cannot be a zero length string. |
| NtwsRadioProfileRFScanChannelScope | INTEGER { operating (1), regulatory (2), all (3) } | current | Enumeration of RF scanning channel scopes for a radio profile. |
| NtwsRadioProfileRFScanMode | INTEGER { active (1), passive (2) } | current | Enumeration of RF scanning modes for a radio profile. |
| NtwsServiceProfile11nFrameAggregationType | INTEGER { msdu (1), mpdu (2), all (3), disable (4) } | current | Enumeration of 802.11n frame aggregation types for a service profile. |
| NtwsServiceProfile11nMode | INTEGER { enable (1), disable (2), required (3) } | current | Enumeration of 802.11n modes for a service profile. |
| NtwsServiceProfile11nMpduMaxLength | INTEGER { mpdu-8k (1), mpdu-16k (2), mpdu-32k (3), mpdu-64k (4) } | current | Enumeration of 802.11n A-MPDU maximum lengths for a service profile. |
| NtwsServiceProfile11nMsduMaxLength | INTEGER { msdu-4k (1), msdu-8k (2) } | current | Enumeration of 802.11n A-MSDU maximum lengths for a service profile. |
| NtwsServiceProfileAuthFallthruType | INTEGER { none (1), web-auth (2), web-aaa-portal (3), last-resort (4) } | current | Enumeration of Authentication Fallthrough types for a service profile. |
| NtwsServiceProfileCacMode | INTEGER { none (1), session (2), vendor (3) } | current | Enumeration of Call Admission Control types for a service profile. |
| NtwsServiceProfileName | OCTET STRING (SIZE (1..32)) | current | Service Profile Name, consists of printable ASCII characters between 0x21 (!), and 0x7d (}) with no leading, embedded, or trailing space. Cannot be a zero length string. |
| NtwsServiceProfileSsidType | INTEGER { clear (1), crypto (2) } | current | Enumeration of Service Types provided on a service profile. |
| NtwsSnoopFilterName | OCTET STRING (SIZE (1..15)) | current | Snoop Filter Name, consists of printable ASCII characters between 0x21 (!), and 0x7d (}) with no leading, embedded, or trailing space. Cannot be a zero length string. |